Make source code comments use gender neutral pronouns

The changes also include some grammatical fixes as well.
2021-12-02 16:18:04 -05:00
parent 501c3dc657
commit 0042f58e4c
59 changed files with 77 additions and 77 deletions
--- a/src/Mod/Fem/Gui/TaskPostBoxes.cpp
+++ b/src/Mod/Fem/Gui/TaskPostBoxes.cpp
@@ -1138,7 +1138,7 @@ void TaskPostWarpVector::on_Max_valueChanged(double) {

    /*
     * problem, if warp_factor is 2000 one would like to input 4000 as max, one starts to input 4
-     * immediately the warp_factor is changed to 4 because 4 < 2000, but one has just input one character of his 4000
+     * immediately the warp_factor is changed to 4 because 4 < 2000, but one has just input one character of their 4000
     * I do not know how to solve this, but the code to set slider and spinbox is fine thus I leave it ...
     *
     * mhh it works if "apply changes to pipeline directly" button is deactivated, still it really confuses if
--- a/src/Mod/Fem/femmesh/gmshtools.py
+++ b/src/Mod/Fem/femmesh/gmshtools.py
@@ -1011,7 +1011,7 @@ for len in max_mesh_sizes:
 """
 TODO
 class GmshTools should be splittet in two classes
-one class should only collect the mesh parameter from mesh object and his childs
+one class should only collect the mesh parameter from mesh object and its childs
 a second class only uses the collected parameter,
 writes the input file runs gmsh reads back the unv and returns a FemMesh
 gmsh binary will be collected in the second class
--- a/src/Mod/Fem/femmesh/meshtools.py
+++ b/src/Mod/Fem/femmesh/meshtools.py
@@ -1015,7 +1015,7 @@ def get_ref_edgenodes_table(
                    nodecount += 1
            if nodecount > 1:
                refedge_fem_faceelements.append(elem)
-        # for every refedge_fem_faceelement look which of his nodes is in
+        # for every refedge_fem_faceelement look which of its nodes is in
        # refedge_nodes --> add all these nodes to edge_table
        for elem in refedge_fem_faceelements:
            fe_refedge_nodes = []
--- a/src/Mod/Fem/femsolver/calculix/writer.py
+++ b/src/Mod/Fem/femsolver/calculix/writer.py
@@ -70,7 +70,7 @@ from femtools import constants
 units_information = """***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/box_frequency.inp
+++ b/src/Mod/Fem/femtest/data/calculix/box_frequency.inp
@@ -471,7 +471,7 @@ S, E
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/box_static.inp
+++ b/src/Mod/Fem/femtest/data/calculix/box_static.inp
@@ -599,7 +599,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp
@@ -818,7 +818,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp
@@ -113,7 +113,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp
@@ -113,7 +113,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp
@@ -113,7 +113,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp
@@ -453,7 +453,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp
@@ -139,7 +139,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp
@@ -129,7 +129,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp
@@ -255,7 +255,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp
@@ -113,7 +113,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp
@@ -1620,7 +1620,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp
@@ -347,7 +347,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp
@@ -419,7 +419,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp
@@ -416,7 +416,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp
+++ b/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp
@@ -426,7 +426,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_centrif.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_centrif.inp
@@ -18792,7 +18792,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp
@@ -38424,7 +38424,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp
@@ -5356,7 +5356,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp
@@ -3470,7 +3470,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp
@@ -2199,7 +2199,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_tie.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_tie.inp
@@ -18662,7 +18662,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp
@@ -3800,7 +3800,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp
+++ b/src/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp
@@ -13173,7 +13173,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp
+++ b/src/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp
@@ -17084,7 +17084,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp
+++ b/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp
@@ -29200,7 +29200,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp
+++ b/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp
@@ -2711,7 +2711,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp
+++ b/src/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp
@@ -1292,7 +1292,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/material_nonlinear.inp
+++ b/src/Mod/Fem/femtest/data/calculix/material_nonlinear.inp
@@ -20129,7 +20129,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp
+++ b/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp
@@ -2674,7 +2674,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp
+++ b/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp
@@ -2786,7 +2786,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp
+++ b/src/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp
@@ -8258,7 +8258,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp
+++ b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp
@@ -168,7 +168,7 @@ MF, PS
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp
+++ b/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp
@@ -205,7 +205,7 @@ RF
 ***********************************************************
 **  About units:
 **  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers he provides have consistent units.
+**  Golden rule: The user must make sure that the numbers they provide have consistent units.
 **  The user is the FreeCAD calculix writer module ;-)
 **
 **  The unit system which is used at Guido Dhondt's company: mm, N, s, K
--- a/src/Mod/Fem/femtools/checksanalysis.py
+++ b/src/Mod/Fem/femtools/checksanalysis.py
@@ -344,7 +344,7 @@ def check_member_for_solver_calculix(analysis, solver, mesh, member):
            ):
                message += (
                    "Mesh without geometry link. "
-                    "The mesh needs to know his geometry for the beam rotations.\n"
+                    "The mesh needs to know its geometry for the beam rotations.\n"
                )
        if len(member.geos_beamrotation) > 1:
            message += (