diff --git a/src/Gui/Language/FreeCAD_af.qm b/src/Gui/Language/FreeCAD_af.qm index ede53e87ad..d9c3f7a2e4 100644 Binary files a/src/Gui/Language/FreeCAD_af.qm and b/src/Gui/Language/FreeCAD_af.qm differ diff --git a/src/Gui/Language/FreeCAD_af.ts b/src/Gui/Language/FreeCAD_af.ts index 6ffb1c304b..1d0a7f3a7d 100644 --- a/src/Gui/Language/FreeCAD_af.ts +++ b/src/Gui/Language/FreeCAD_af.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Buite interval + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Knoppies - - Clear - Maak skoon - Print Reference Druk Verwysing @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball Buttons + + Reset + Herstel + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Spesifiseer asseblief 'n ander gids. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Spesifiseer asseblief 'n ander gids. Clear Maak skoon + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4681,6 +4721,20 @@ Wil jy jou veranderinge stoor? PDF file + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5316,6 +5370,21 @@ Wil jy afsluit sonder om jou data te stoor? Die lêer '%1' kan nie oopgemaak word nie. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Lêer nie gevind nie + + + The file '%1' cannot be opened. + Die lêer '%1' kan nie oopgemaak word nie. + + Gui::RevitNavigationStyle @@ -6643,6 +6712,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7849,6 +7962,21 @@ Choose 'Abort' to abort Onlangse lêerlys + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_ar.qm b/src/Gui/Language/FreeCAD_ar.qm index 3b7e078d48..35a668529c 100644 Binary files a/src/Gui/Language/FreeCAD_ar.qm and b/src/Gui/Language/FreeCAD_ar.qm differ diff --git a/src/Gui/Language/FreeCAD_ar.ts b/src/Gui/Language/FreeCAD_ar.ts index 502df4cf79..63b35c092f 100644 --- a/src/Gui/Language/FreeCAD_ar.ts +++ b/src/Gui/Language/FreeCAD_ar.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range خارج النطاق + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons الأزرار - - Clear - مسح - Print Reference Print Reference @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball Buttons + + Reset + Reset + Gui::Dialog::DlgDisplayProperties @@ -2103,10 +2111,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2119,6 +2123,10 @@ Specify another directory, please. Clear مسح + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3217,6 +3225,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3517,6 +3553,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4683,6 +4723,20 @@ Do you want to save your changes? ملف الـ PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5317,6 +5371,21 @@ Do you want to exit without saving your data? لا يمكن فتح الملف '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + لم يتم إيجاد الملف + + + The file '%1' cannot be opened. + لا يمكن فتح الملف '%1'. + + Gui::RevitNavigationStyle @@ -6648,6 +6717,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7854,6 +7967,21 @@ Choose 'Abort' to abort قائمة الملفات الأخيرة + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm index 129ee2666f..325802880d 100644 Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 725eb34c5e..d687fbec5b 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fora d'abast + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botons - - Clear - Neteja - Print Reference Imprimeix les referències @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Botons del ratolí 3D + + Reset + Reinicialitza + Gui::Dialog::DlgDisplayProperties @@ -2097,10 +2105,6 @@ Specify another directory, please. Filter by type Filtra per tipus - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Si està activada, la selecció de la vista 3D es sincronitzarà amb la jerarquia d'objectes completa. - Sync sub-object selection Sincronitza la selecció dels subobjectes @@ -2113,6 +2117,10 @@ Specify another directory, please. Clear Neteja + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3203,6 +3211,34 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> The directory in which the application will search for macros El directori en què l’aplicació cercarà macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3501,6 +3537,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Sistema imperial d'unitats per a enginyeria civil (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4663,6 +4703,20 @@ Do you want to save your changes? Arxiu PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5293,6 +5347,21 @@ Do you want to exit without saving your data? El fitxer '%1' no es pot obrir. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + No s'ha trobat el fitxer. + + + The file '%1' cannot be opened. + El fitxer '%1' no es pot obrir. + + Gui::RevitNavigationStyle @@ -6614,6 +6683,50 @@ Trieu «Interromp» per a interrompre Override colors... Sobreescriu els colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7820,6 +7933,21 @@ Trieu «Interromp» per a interrompre Llista de fitxers recents + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index 7b9d8b3a98..0557e4a215 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index c0917cebb8..e6a4561633 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Mimo rozsah + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Tlačítka - - Clear - Vyčistit - Print Reference Tisk referencí @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Tlačítka 3D myši + + Reset + Reset + Gui::Dialog::DlgDisplayProperties @@ -2098,10 +2106,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2114,6 +2118,10 @@ Specify another directory, please. Clear Vyčistit + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2263,11 +2271,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + Běžné zprávy budou zaznamenávány Record normal messages - Record normal messages + Zaznamenávat běžné zprávy @@ -2393,7 +2401,7 @@ will be shown at the lower left corner in opened files Rendering - Rendering + Vykreslování If selected, Vertex Buffer Objects (VBO) will be used. @@ -3211,6 +3219,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3511,6 +3547,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4492,27 +4532,27 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Display message types - Display message types + Zobrazit typy zpráv Normal messages - Normal messages + Běžné zprávy Log messages - Log messages + Protokolovat zprávy Warnings - Warnings + Varování Errors - Errors + Chyby Show report view on - Show report view on + Zobrazit přehled na @@ -4675,6 +4715,20 @@ Chcete uložit provedené změny? PDF soubor + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5311,6 +5365,21 @@ Chcete průvodce ukončit bez uložení dat? Soubor '%1' nelze otevřít. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Soubor nebyl nalezen + + + The file '%1' cannot be opened. + Soubor '%1' nelze otevřít. + + Gui::RevitNavigationStyle @@ -6637,6 +6706,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Opravdu si přejete pokračovat? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7843,6 +7956,21 @@ Choose 'Abort' to abort Seznam naposledy otevřených souborů + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -7911,11 +8039,11 @@ Choose 'Abort' to abort Save All - Save All + Uložit vše Save all opened document - Save all opened document + Uložit všechny otevřené dokumenty @@ -7971,11 +8099,11 @@ Choose 'Abort' to abort &Back - &Back + &Zpět Go back to previous selection - Go back to previous selection + Vrátit se na předchozí výběr @@ -8001,7 +8129,7 @@ Choose 'Abort' to abort &Forward - &Forward + &Vpřed Repeat the backed selection @@ -8121,7 +8249,7 @@ Choose 'Abort' to abort Add text document - Add text document + Přidat textový dokument Add text document to active document @@ -8327,7 +8455,7 @@ Choose 'Abort' to abort Select all instances - Select all instances + Vybrat všechny instance Select all instances of the current selected object @@ -8537,7 +8665,7 @@ Choose 'Abort' to abort Home - Home + Domů Set to default home view @@ -8882,14 +9010,14 @@ Choose 'Abort' to abort TreeView - TreeView + Zobrazení stromu StdTreeDrag TreeView - TreeView + Zobrazení stromu Initiate dragging @@ -8908,7 +9036,7 @@ Choose 'Abort' to abort TreeView - TreeView + Zobrazení stromu Multi document @@ -8919,7 +9047,7 @@ Choose 'Abort' to abort StdTreePreSelection TreeView - TreeView + Zobrazení stromu Pre-selection @@ -8934,11 +9062,11 @@ Choose 'Abort' to abort StdTreeRecordSelection TreeView - TreeView + Zobrazení stromu Record selection - Record selection + Výběr záznamu Record selection in tree view in order to go back/forward using navigation button @@ -8949,7 +9077,7 @@ Choose 'Abort' to abort StdTreeSelection TreeView - TreeView + Zobrazení stromu Go to selection @@ -8968,18 +9096,18 @@ Choose 'Abort' to abort TreeView - TreeView + Zobrazení stromu Single document - Single document + Jediný dokument StdTreeSyncPlacement TreeView - TreeView + Zobrazení stromu Sync placement @@ -8994,7 +9122,7 @@ Choose 'Abort' to abort StdTreeSyncSelection TreeView - TreeView + Zobrazení stromu Sync selection @@ -9009,7 +9137,7 @@ Choose 'Abort' to abort StdTreeSyncView TreeView - TreeView + Zobrazení stromu Sync view diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index d62aaca74f..c5e7d16c58 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 778c833f84..ca79e2df6d 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -136,11 +136,11 @@ Enable Translations - Translationen aktivieren + Verschiebung aktivieren Enable Rotations - Rotationen aktivieren + Drehung aktivieren Calibrate @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Außerhalb des Bereichs + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ Wenn dies nicht ausgewählt ist, muss die Eigenschaft eindeutig benannt sein und Buttons Schaltflächen - - Clear - Löschen - Print Reference Referenz anzeigen @@ -1070,6 +1074,10 @@ Wenn dies nicht ausgewählt ist, muss die Eigenschaft eindeutig benannt sein und Spaceball Buttons Spaceball-Knöpfe + + Reset + Zurücksetzen + Gui::Dialog::DlgDisplayProperties @@ -2097,10 +2105,6 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Filter by type Nach Typ filtern - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Wenn aktiviert wird die 3D-Ansichtsauswahl mit der vollständigen Objekthierarchie synchronisiert. - Sync sub-object selection Synchronisieren der Unterobjekt-Auswahl @@ -2113,6 +2117,10 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Clear Löschen + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Wenn aktiviert wird die 3D-Ansichtsauswahl mit der vollständigen Objekthierarchie synchronisiert. + Gui::Dialog::DlgReportView @@ -2174,7 +2182,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Log messages will be recorded - Protokollmeldungen werden aufgezeichnet + Protokoll-Meldungen werden aufgezeichnet Warnings will be recorded @@ -2205,28 +2213,28 @@ on-screen while displaying the warning When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message - Protokoll-Nachrichten werden in einem Berichtsfenster dargestellt + Wenn eine normale Meldung aufgetreten ist, erscheint der Berichtsansicht-Dialog auf dem Bildschirm um die Meldung anzuzeigen Show report view on normal message - Berichtsansicht bei Protokollnachrichten anzeigen + Berichtsansicht für normale Meldungen anzeigen When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message - Protokoll-Nachrichten werden in einem Berichtsfenster dargestellt + Wenn eine Protokoll-Meldung aufgetreten ist, erscheint der Berichtsansicht-Dialog auf dem Bildschirm um die Protokoll-Meldung anzuzeigen Show report view on log message - Berichtsansicht bei Protokollnachrichten anzeigen + Berichtsansicht für Protokoll-Meldungen anzeigen Font color for normal messages in Report view panel - Schriftfarbe für Protokoll Nachrichten in der Berichtsansicht + Schriftfarbe für normale Nachrichten in der Berichtsansicht Font color for log messages in Report view panel - Schriftfarbe für Protokoll Nachrichten in der Berichtsansicht + Schriftfarbe für Protokoll-Meldungen in der Berichtsansicht Font color for warning messages in Report view panel @@ -2234,7 +2242,7 @@ on-screen while displaying the log message Font color for error messages in Report view panel - Schriftfarbe für Fehler Nachrichten in der Berichtsansicht + Schriftfarbe für Fehlermeldungen in der Berichtsansicht Internal Python output will be redirected @@ -2258,11 +2266,11 @@ von der Python-Konsole in das Berichtsfenster umgeleitet Normal messages will be recorded - Protokollmeldungen werden aufgezeichnet + Normale Meldungen werden aufgezeichnet Record normal messages - Record normal messages + Normale Meldungen aufzeichnen @@ -3201,6 +3209,34 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com>The directory in which the application will search for macros Das Verzeichnis, in dem die Anwendung nach Makros sucht + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + Anzahl der Makros in der aktuellen Makroliste + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3501,6 +3537,10 @@ Das Neigen der Maus wird durch diese Einstellung nicht deaktiviert.Imperial for Civil Eng (ft, ft/sec) Angloamerikanisch für Bauingenieurwesen (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sek) + Gui::Dialog::DlgSettingsViewColor @@ -4480,27 +4520,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Arten der Bildschirm-Meldungen Normal messages - Normal messages + Normale Meldungen Log messages - Log messages + Protokoll-Meldungen Warnings - Warnings + Warnungen Errors - Errors + Fehler Show report view on - Show report view on + Berichtsansicht anzeigen für @@ -4665,6 +4705,20 @@ Sollen die Änderungen gespeichert werden? PDF-Datei + + Gui::ExpressionLineEdit + + Exact match + Exakte Übereinstimmung + + + + Gui::ExpressionTextEdit + + Exact match + Exakte Übereinstimmung + + Gui::FileChooser @@ -5298,6 +5352,21 @@ Wollen Sie sie beenden, ohne Ihre Daten zu speichern? Die Datei '%1' kann nicht geöffnet werden. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Datei nicht gefunden + + + The file '%1' cannot be opened. + Die Datei '%1' kann nicht geöffnet werden. + + Gui::RevitNavigationStyle @@ -6629,6 +6698,50 @@ Wählen Sie 'Abbrechen' um abzubrechen Override colors... Farben überschreiben... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identischer physischer Pfad erkannt. Dies kann zu unerwünschtem Überschreiben des vorhandenen Dokuments führen! + + + + + Are you sure you want to continue? + Bist du sicher, dass du fortfahren möchtest? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Physikalischer Pfad: + + + +Document: + +Dokument: + + + + Path: + + Pfad: + + + Identical physical path + Identischer physischer Pfad + SelectionFilter @@ -7835,6 +7948,21 @@ Wählen Sie 'Abbrechen' um abzubrechen Zuletzt geöffnete Dateien + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Aktuelle Makros + + + Recent macro list + Aktuelle Makroliste + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index cb00ccee32..e68ecbbfb1 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index fff96bb214..3df14adc3d 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Εκτός Εύρους + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Πλήκτρα - - Clear - Εκκαθάριση - Print Reference Εκτυπώστε Αναφορά @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Πλήκτρα Σφαίρας Γραφικών + + Reset + Επαναφορά + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Specify another directory, please. Clear Εκκαθάριση + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4682,6 +4722,20 @@ Do you want to save your changes? Αρχείο PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5315,6 +5369,21 @@ Do you want to exit without saving your data? Αδυναμία ανοίγματος του αρχείου '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Το αρχείο δεν βρέθηκε + + + The file '%1' cannot be opened. + Αδυναμία ανοίγματος του αρχείου '%1'. + + Gui::RevitNavigationStyle @@ -6647,6 +6716,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7853,6 +7966,21 @@ Choose 'Abort' to abort Λίστα πρόσφατων αρχείων + + StdCmdRecentMacros + + Macro + Μακροεντολή + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 403fd70ab1..e61ca254df 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 4a517b5935..43a933a18a 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -432,6 +432,14 @@ mientras hace clic con el botón izquierdo o derecho y mueve el ratón hacia arr Out Of Range Fuera de rango + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ Si esto no está marcado, entonces la propiedad debe ser nombrada de forma únic Buttons Botones - - Clear - Limpiar - Print Reference Imprimir referencia @@ -1071,6 +1075,10 @@ Si esto no está marcado, entonces la propiedad debe ser nombrada de forma únic Spaceball Buttons Botones del SpaceBall + + Reset + Reiniciar + Gui::Dialog::DlgDisplayProperties @@ -2103,10 +2111,6 @@ Especifique otro directorio, por favor. Filter by type Filtrar por tipo - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Si está activado, entonces la selección de vista 3D se sincronizará con la jerarquía completa de objetos. - Sync sub-object selection Sincronizar selección de sub-objetos @@ -2119,6 +2123,10 @@ Especifique otro directorio, por favor. Clear Limpiar + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2264,11 +2272,11 @@ desde la consola de Python al panel de la vista de informe Normal messages will be recorded - Normal messages will be recorded + Los mensajes normales serán grabados Record normal messages - Record normal messages + Grabar mensajes normales @@ -3211,6 +3219,34 @@ También puede utilizar el formulario: John Doe <john@doe.com>The directory in which the application will search for macros El directorio en el que la aplicación buscará macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3509,6 +3545,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial para Ing Civil (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4490,27 +4530,27 @@ La columna 'Estado' muestra si el documento puede ser recuperado. Display message types - Display message types + Mostrar tipos de mensajes Normal messages - Normal messages + Mensajes normales Log messages - Log messages + Mensajes de registro Warnings - Warnings + Advertencias Errors - Errors + Errores Show report view on - Show report view on + Mostrar vista del informe en @@ -4675,6 +4715,20 @@ Desea guardar los cambios? Archivo PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5306,6 +5360,21 @@ Do you want to exit without saving your data? El archivo '%1' no se puede abrir. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Archivo no encontrado + + + The file '%1' cannot be opened. + El archivo '%1' no se puede abrir. + + Gui::RevitNavigationStyle @@ -6634,6 +6703,50 @@ Seleccione 'Abortar' para abortar Override colors... Anular colores... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + ¿Está seguro de que desea continuar? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7840,6 +7953,21 @@ Seleccione 'Abortar' para abortar Lista de archivos recientes + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index 86f386889c..af7aa5d05e 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index c86e0ac552..b59d05fc0a 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Barrutitik kanpo + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -610,7 +618,7 @@ while doing a left or right click and move the mouse up or down Verbose description of the new property. - Verbose description of the new property. + Propietate berriaren deskribapen xehea. Documentation @@ -1019,7 +1027,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces %1 module not loaded - %1 module not loaded + %1 modulua ez dago kargatuta @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botoiak - - Clear - Garbitu - Print Reference Inprimaketa-erreferentzia @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceballen botoiak + + Reset + Berrezarri + Gui::Dialog::DlgDisplayProperties @@ -2101,10 +2109,6 @@ Zehaztu beste direktorio, mesedez. Filter by type Motaren arabera iragazita - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Aktiboa badago, 3D bistaren hautapena objektuaren hierarkia osoarekin sinkronizatuko da. - Sync sub-object selection Sinkronizatu azpiobjektuen hautapena @@ -2117,6 +2121,10 @@ Zehaztu beste direktorio, mesedez. Clear Garbitu + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2266,11 +2274,11 @@ txosten-bistaren panelera birzuzenduko da Normal messages will be recorded - Normal messages will be recorded + Mezu normalak grabatuko dira Record normal messages - Record normal messages + Grabatu mezu normalak @@ -3216,6 +3224,34 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> The directory in which the application will search for macros Aplikazioak makroak bilatuko dituen direktorioa + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3407,11 +3443,11 @@ Ezarpen honek ez du desgaitzen sagu bidezko inklinazioa. Default camera orientation - Default camera orientation + Kameraren orientazio lehenetsia Default camera orientation when creating a new document or selecting the home view - Default camera orientation when creating a new document or selecting the home view + Kameraren orientazio lehenetsia dokumentu bat sortzean edo bista nagusia hautatzean @@ -3516,6 +3552,10 @@ Ezarpen honek ez du desgaitzen sagu bidezko inklinazioa. Imperial for Civil Eng (ft, ft/sec) Inperiala ingeniaritza zibilerako (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4497,23 +4537,23 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Bistaratze-mezuen motak Normal messages - Normal messages + Mezu normalak Log messages - Log messages + Egunkari-mezuak Warnings - Warnings + Abisuak Errors - Errors + Erroreak Show report view on @@ -4682,6 +4722,20 @@ Aldaketak gorde nahi dituzu? PDF fitxategia + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5316,6 +5370,21 @@ Datuak gorde gabe irten nahi duzu? '%1' fitxategia ezin da ireki. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Fitxategia ez da aurkitu + + + The file '%1' cannot be opened. + '%1' fitxategia ezin da ireki. + + Gui::RevitNavigationStyle @@ -6647,6 +6716,50 @@ Aukeratu 'Abortatu' abortatzeko. Override colors... Gainidatzi koloreak... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7853,6 +7966,21 @@ Aukeratu 'Abortatu' abortatzeko. Azken fitxategien zerrenda + + StdCmdRecentMacros + + Macro + Makroa + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8547,11 +8675,11 @@ Aukeratu 'Abortatu' abortatzeko. Home - Home + Hasiera Set to default home view - Set to default home view + Ezarri hasierako bista lehenetsira @@ -9156,7 +9284,7 @@ Ziur zaude jarraitu nahi duzula? These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Elementu hauek ezabatzeko hautatu dira, baina ez daude dokumentu aktiboan. diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index 4e2f6ed8a0..14d69301fb 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index eb43a72f86..405261c8c5 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Alueen ulkopuolella + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Painikkeet - - Clear - Tyhjennä - Print Reference Tulosta viite @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons "Spaceball" painikkeet + + Reset + Palauta + Gui::Dialog::DlgDisplayProperties @@ -2103,10 +2111,6 @@ Määritä toinen hakemisto, ole hyvä. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2119,6 +2123,10 @@ Määritä toinen hakemisto, ole hyvä. Clear Tyhjennä + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4681,6 +4721,20 @@ Do you want to save your changes? PDF-tiedosto + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5313,6 +5367,21 @@ Do you want to exit without saving your data? Tiedostoa '%1' ei voi avata. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Tiedostoa ei löydy + + + The file '%1' cannot be opened. + Tiedostoa '%1' ei voi avata. + + Gui::RevitNavigationStyle @@ -6642,6 +6711,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7848,6 +7961,21 @@ Choose 'Abort' to abort Viimeksi käytettyjen tiedostojen luettelo + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_fil.qm b/src/Gui/Language/FreeCAD_fil.qm index 5c100e7cb3..89c1216bb5 100644 Binary files a/src/Gui/Language/FreeCAD_fil.qm and b/src/Gui/Language/FreeCAD_fil.qm differ diff --git a/src/Gui/Language/FreeCAD_fil.ts b/src/Gui/Language/FreeCAD_fil.ts index 1db6c3ccfa..6a08c911b1 100644 --- a/src/Gui/Language/FreeCAD_fil.ts +++ b/src/Gui/Language/FreeCAD_fil.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Wala sa Range + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Pindutan - - Clear - Malinaw - Print Reference I-imprinta ang sanggunian @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Ispeysball na mga pindutan + + Reset + I-set muli + Gui::Dialog::DlgDisplayProperties @@ -2101,10 +2109,6 @@ mangyaring Tukuyin ang ibang direktoryo,. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2117,6 +2121,10 @@ mangyaring Tukuyin ang ibang direktoryo,. Clear Malinaw + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3215,6 +3223,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3515,6 +3551,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4682,6 +4722,20 @@ Gusto mo bang i-save ang iyong mga pagbabago? PDF file + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5316,6 +5370,21 @@ Gusto mo bang lumabas nang hindi nai-impok ang iyong data? Ang file na '%1' ay hindi mabubuksan. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Hindi natagpuan ang file + + + The file '%1' cannot be opened. + Ang file na '%1' ay hindi mabubuksan. + + Gui::RevitNavigationStyle @@ -6645,6 +6714,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7851,6 +7964,21 @@ Choose 'Abort' to abort Listahan ng kamakailang file + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index a8dc748204..e62dfc0219 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 022a47f599..18bd8b20be 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Hors de portée + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Boutons - - Clear - Effacer - Print Reference Imprimer les références @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Boutons de la SpaceBall + + Reset + Réinitialiser + Gui::Dialog::DlgDisplayProperties @@ -2099,10 +2107,6 @@ Veuillez spécifier un autre répertoire. Filter by type Filtrer par type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Si activé, la sélection de la vue 3D sera synchronisée avec la hiérarchie complète des objets. - Sync sub-object selection Synchroniser la sélection des sous-objets @@ -2115,6 +2119,10 @@ Veuillez spécifier un autre répertoire. Clear Effacer + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3212,6 +3220,34 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com>The directory in which the application will search for macros Le répertoire dans lequel l'application recherchera des macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3510,6 +3546,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) En impérial pour le génie civil (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4498,19 +4538,19 @@ La colonne « État » indique si le document peut être récupéré. Log messages - Log messages + Message du journal Warnings - Warnings + Avertissements Errors - Errors + Erreurs Show report view on - Show report view on + Afficher le rapport @@ -4675,6 +4715,20 @@ Voulez enregistrer les modifications ? Fichier PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5306,6 +5360,21 @@ Voulez vous quitter sans sauvegarder vos données? Impossible d'ouvrir le fichier '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Fichier introuvable + + + The file '%1' cannot be opened. + Impossible d'ouvrir le fichier '%1'. + + Gui::RevitNavigationStyle @@ -6632,6 +6701,50 @@ Choisissez "Abandonner" pour annuler Override colors... Remplacer les couleurs... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Êtes-vous sûr de vouloir continuer ? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7838,6 +7951,21 @@ Choisissez "Abandonner" pour annuler Liste des fichiers récents + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8337,7 +8465,7 @@ Choisissez "Abandonner" pour annuler TreeView actions - Actions de l'arboresence + Configuration de l'arborescence TreeView behavior options and actions diff --git a/src/Gui/Language/FreeCAD_gl.qm b/src/Gui/Language/FreeCAD_gl.qm index 395c479c00..af50f4aa8e 100644 Binary files a/src/Gui/Language/FreeCAD_gl.qm and b/src/Gui/Language/FreeCAD_gl.qm differ diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index a214766f2e..a252150d68 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fóra de rango + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botóns - - Clear - Baleirar - Print Reference Impresionar referencia @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Botóns do SpaceBall + + Reset + Restaurar + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Por favor, especifique outro directorio. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Por favor, especifique outro directorio. Clear Baleirar + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4682,6 +4722,20 @@ Quere gardar os cambios? Ficheiro PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5318,6 +5372,21 @@ Quere saír sen gardar os seus datos? O ficheiro '%1', non se pode abrir. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Ficheiro non atopado + + + The file '%1' cannot be opened. + O ficheiro '%1', non se pode abrir. + + Gui::RevitNavigationStyle @@ -6646,6 +6715,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7852,6 +7965,21 @@ Choose 'Abort' to abort Listaxe de ficheiros recentes + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index 5c65f0ec5a..2b39c5f425 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index 92a84af4bb..0c628cae2e 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Izvan dometa + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ Ako se to ne označi, osobina mora biti jedinstveno imenovana i njoj se pristupa Buttons Tipke - - Clear - Brisanje - Print Reference Ispis Reference @@ -1070,6 +1074,10 @@ Ako se to ne označi, osobina mora biti jedinstveno imenovana i njoj se pristupa Spaceball Buttons Spaceball Tipke + + Reset + Odbaci + Gui::Dialog::DlgDisplayProperties @@ -2103,10 +2111,6 @@ Specify another directory, please. Filter by type Filtriraj prema tipu - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Ako je omogućeno, odabir 3D prikaza sinkronizirati će se s hijerarhijom kompletnih objekata. - Sync sub-object selection Sinkroniziranje odabira pod-objekta @@ -2119,6 +2123,10 @@ Specify another directory, please. Clear Brisanje + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2278,11 +2286,13 @@ od Python konzole na ploču prikaza izvješća Normal messages will be recorded - Normal messages will be recorded + Snimit će se uobičajene poruke + + Record normal messages - Record normal messages + Snima normalne poruke @@ -3239,6 +3249,34 @@ Možete koristiti i obrazac: John Doe <john@doe.com> The directory in which the application will search for macros Imenik u kojem će aplikacija tražiti makronaredbe + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3545,6 +3583,10 @@ Naginjanje miša nije onemogućeno ovom postavkom. Imperial for Civil Eng (ft, ft/sec) Imperijal za civilno Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4531,27 +4573,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Prikažite vrste poruka Normal messages - Normal messages + Normalne poruke Log messages - Log messages + Log poruke Warnings - Warnings + Upozorenja Errors - Errors + Greške Show report view on - Show report view on + Prikaži izvješća o pogrešci @@ -4714,6 +4756,20 @@ Do you want to save your changes? PDF Datoteka + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5349,6 +5405,21 @@ Do you want to exit without saving your data? Datoteka '%1' ne može biti otvorena. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Datoteka nije pronađena + + + The file '%1' cannot be opened. + Datoteka '%1' ne može biti otvorena. + + Gui::RevitNavigationStyle @@ -6683,6 +6754,50 @@ Odaberite "Prekini" za prekid Override colors... Nadjačava boje... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Jeste li sigurni da želite nastaviti? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7894,6 +8009,21 @@ Odaberite "Prekini" za prekid Popis nedavnih datoteka + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index 41fe4ce1f1..f8683a4c1f 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 978db72c41..95a16a81cc 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Tartományon kívüli + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Gombok - - Clear - Törlés - Print Reference Nyomtatási hivatkozás @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Térbeli mozgatás gombjai + + Reset + Alaphelyzetbe állítása + Gui::Dialog::DlgDisplayProperties @@ -2092,10 +2100,6 @@ Kérem válasszon másik könyvtárat. Filter by type Szűrés típus szerint - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Az al-objektum kiválasztás szinkronizálása @@ -2108,6 +2112,10 @@ Kérem válasszon másik könyvtárat. Clear Törlés + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3203,6 +3211,34 @@ A következő forma is használható: Gipsz Jakab <gipjak@pelda.hu>The directory in which the application will search for macros Az a mappa, ahol az alkalmazás a makrókat keresni fogja + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3503,6 +3539,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial építőipari (ft, ft/sec) (láb, láb/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4667,6 +4707,20 @@ El akarja menteni a változásokat? PDF-fájl + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5303,6 +5357,21 @@ Ki szeretne lépni az adatok mentése nélkül? A '%1' fájl nem nyitható meg. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + A fájl nem található + + + The file '%1' cannot be opened. + A '%1' fájl nem nyitható meg. + + Gui::RevitNavigationStyle @@ -6631,6 +6700,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7837,6 +7950,21 @@ Choose 'Abort' to abort Legutóbbi fájlok listája + + StdCmdRecentMacros + + Macro + Makró + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_id.qm b/src/Gui/Language/FreeCAD_id.qm index 50231133c0..9e19fe611f 100644 Binary files a/src/Gui/Language/FreeCAD_id.qm and b/src/Gui/Language/FreeCAD_id.qm differ diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index 763c12ab34..8ca362acbd 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Di luar jangkauan + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Tombol - - Clear - Bersih - Print Reference Referensi Cetak @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Tombol Spaceball + + Reset + Setel ulang + Gui::Dialog::DlgDisplayProperties @@ -2099,10 +2107,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2115,6 +2119,10 @@ Specify another directory, please. Clear Bersih + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3212,6 +3220,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3512,6 +3548,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4673,6 +4713,20 @@ Do you want to save your changes? File PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5303,6 +5357,21 @@ Do you want to exit without saving your data? File ' % 1 ' tidak dapat dibuka. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Berkas tidak ditemukan + + + The file '%1' cannot be opened. + File ' % 1 ' tidak dapat dibuka. + + Gui::RevitNavigationStyle @@ -6494,7 +6563,7 @@ Be aware the point where you click matters. Paste - Paste + Tempel Expression error @@ -6624,6 +6693,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7830,6 +7943,21 @@ Choose 'Abort' to abort Daftar file terbaru + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index db0abaaf9a..ab70e6c986 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index bde6735cae..9ed4efc8b7 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -68,7 +68,7 @@ <empty> - <vuoto> + <empty> Angle @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fuori portata + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ Se questo non è spuntato, la proprietà deve avere un nome univoco e vi si acce Buttons Pulsanti - - Clear - Pulisci - Print Reference Stampa riferimento @@ -1070,6 +1074,10 @@ Se questo non è spuntato, la proprietà deve avere un nome univoco e vi si acce Spaceball Buttons Pulsanti Spaceball + + Reset + Ripristina + Gui::Dialog::DlgDisplayProperties @@ -1785,7 +1793,7 @@ Nota: le modifiche verranno applicate al successivo cambio di ambiente di lavoro Help viewer - Visualizzatore Aiuto + Visualizzatore di aiuto Location of start page @@ -2102,10 +2110,6 @@ Specificare un'altra cartella. Filter by type Filtra per tipo - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Se abilitato, la selezione della vista 3D sarà sincronizzata con la gerarchia completa degli oggetti. - Sync sub-object selection Sincronizza la selezione dei sotto-oggetti @@ -2118,6 +2122,10 @@ Specificare un'altra cartella. Clear Pulisci + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Se abilitato, la selezione della vista 3D sarà sincronizzata con la gerarchia completa degli oggetti. + Gui::Dialog::DlgReportView @@ -2267,11 +2275,11 @@ dalla console di Python al pannello vista Report Normal messages will be recorded - Normal messages will be recorded + I messaggi normali verranno registrati Record normal messages - Record normal messages + Registra i messaggi normali @@ -3214,6 +3222,34 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> The directory in which the application will search for macros La directory nella quale l'applicazione cercherà le macro + + Recent macros menu + Menu delle macro recenti + + + Size of recent macro list + Dimensione dell'elenco delle macro recenti + + + How many macros should be listed in recent macros list + Quante macro dovrebbero essere elencate nell'elenco delle macro recenti + + + Shortcut count + Conteggio scorciatoie + + + How many recent macros should have shortcuts + Quante macro recenti dovrebbero avere scorciatoie + + + Keyboard Modifiers + Modificatori Tastiera + + + Keyboard modifiers, default = Ctrl+Shift+ + Modificatori tastiera, predefinito = Ctrl+Maiusc+ + Gui::Dialog::DlgSettingsNavigation @@ -3514,6 +3550,10 @@ Questa impostazione non disabilitata l'inclinazione tramite mouse. Imperial for Civil Eng (ft, ft/sec) Imperiale per Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4493,27 +4533,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Visualizza tipi di messaggi Normal messages - Normal messages + Messaggi normali Log messages - Log messages + Messaggi di log Warnings - Warnings + Avvertenze Errors - Errors + Errori Show report view on - Show report view on + Mostra la vista report in caso di @@ -4678,6 +4718,20 @@ Si desidera salvare le modifiche? File PDF + + Gui::ExpressionLineEdit + + Exact match + Corrispondenza esatta + + + + Gui::ExpressionTextEdit + + Exact match + Corrispondenza esatta + + Gui::FileChooser @@ -5311,6 +5365,21 @@ Vuoi uscire senza salvare i tuoi dati? Il file '%1' non può essere aperto. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + File non trovato + + + The file '%1' cannot be opened. + Il file '%1' non può essere aperto. + + Gui::RevitNavigationStyle @@ -6642,6 +6711,50 @@ Scegli 'Annulla' per interrompere Override colors... Sostituisci colori... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Sei sicuro di voler continuare? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7848,6 +7961,21 @@ Scegli 'Annulla' per interrompere Lista dei file recenti + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8542,11 +8670,11 @@ Scegli 'Annulla' per interrompere Home - Home + Home Set to default home view - Set to default home view + Imposta come vista iniziale predefinita diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index e9afed44cf..c07cb0816a 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index a1ffd93ae0..a330ff210b 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range 範囲外 + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons ボタン - - Clear - クリア - Print Reference リファレンスを印刷 @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons SpaceNavigatorのボタン + + Reset + リセット + Gui::Dialog::DlgDisplayProperties @@ -2096,10 +2104,6 @@ Specify another directory, please. Filter by type タイプでフィルタリング - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - 有効な場合、3D ビューでの選択はオブジェクト階層全体と同期します。 - Sync sub-object selection サブオブジェクト選択と動機 @@ -2112,6 +2116,10 @@ Specify another directory, please. Clear クリア + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2255,11 +2263,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + 通常メッセージが記録されます。 Record normal messages - Record normal messages + 通常メッセージを記録 @@ -3187,6 +3195,34 @@ John Doe <john@doe.com> 形式を使用することもできます。The directory in which the application will search for macros アプリケーションがマクロを検索するディレクトリ + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3377,11 +3413,11 @@ Mouse tilting is not disabled by this setting. Default camera orientation - Default camera orientation + デフォルトのカメラの向き Default camera orientation when creating a new document or selecting the home view - Default camera orientation when creating a new document or selecting the home view + 新しいドキュメントを作成、またはホームビューを選択した場合のデフォルトのカメラの向き @@ -3486,6 +3522,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) 土木用 帝国単位 (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4467,27 +4507,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + 表示メッセージタイプ Normal messages - Normal messages + 通常メッセージ Log messages - Log messages + ログメッセージ Warnings - Warnings + 警告 Errors - Errors + エラー Show report view on - Show report view on + レポートビューを表示 @@ -4651,6 +4691,20 @@ Do you want to save your changes? PDFファイル + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5281,6 +5335,21 @@ Do you want to exit without saving your data? ファイル '%1' を開くことができませんでした。 + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + ファイルが見つかりませんでした + + + The file '%1' cannot be opened. + ファイル '%1' を開くことができませんでした。 + + Gui::RevitNavigationStyle @@ -5862,7 +5931,7 @@ Do you want to specify another directory? Table - Table + 表 ... @@ -6608,6 +6677,50 @@ Choose 'Abort' to abort Override colors... 色を上書き... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + 本当に続行しますか？ + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7814,6 +7927,21 @@ Choose 'Abort' to abort 最近使用したファイル一覧 + + StdCmdRecentMacros + + Macro + マクロ + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8512,7 +8640,7 @@ Choose 'Abort' to abort Set to default home view - Set to default home view + デフォルトのホームビューに設定 diff --git a/src/Gui/Language/FreeCAD_kab.qm b/src/Gui/Language/FreeCAD_kab.qm index bb466736e5..2b3f820835 100644 Binary files a/src/Gui/Language/FreeCAD_kab.qm and b/src/Gui/Language/FreeCAD_kab.qm differ diff --git a/src/Gui/Language/FreeCAD_kab.ts b/src/Gui/Language/FreeCAD_kab.ts index 4989bb8637..efcf717eb7 100644 --- a/src/Gui/Language/FreeCAD_kab.ts +++ b/src/Gui/Language/FreeCAD_kab.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Hors de portée + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Boutons - - Clear - Clear - Print Reference Imprimer les références @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Boutons de la SpaceBall + + Reset + Réinitialiser + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Ma ulac aɣilif, mudd akaram nniḍen. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Ma ulac aɣilif, mudd akaram nniḍen. Clear Clear + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4682,6 +4722,20 @@ Voulez enregistrer les modifications ? Fichier PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5313,6 +5367,21 @@ Voulez vous quitter sans sauvegarder vos données? Impossible d'ouvrir le fichier '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + File not found + + + The file '%1' cannot be opened. + Impossible d'ouvrir le fichier '%1'. + + Gui::RevitNavigationStyle @@ -6639,6 +6708,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7845,6 +7958,21 @@ Choose 'Abort' to abort Liste des fichiers récents + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_ko.qm b/src/Gui/Language/FreeCAD_ko.qm index f3fd568e9f..f4c2888834 100644 Binary files a/src/Gui/Language/FreeCAD_ko.qm and b/src/Gui/Language/FreeCAD_ko.qm differ diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 50aed33421..7c6d2441d2 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -433,6 +433,14 @@ while doing a left or right click and move the mouse up or down Out Of Range 범위를 벗어났습니다. + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1060,10 +1068,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons 버튼 - - Clear - Clear - Print Reference 참조 인쇄하기 @@ -1072,6 +1076,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball 버튼 + + Reset + 재설정 + Gui::Dialog::DlgDisplayProperties @@ -2101,10 +2109,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2117,6 +2121,10 @@ Specify another directory, please. Clear Clear + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3215,6 +3223,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3515,6 +3551,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4681,6 +4721,20 @@ Do you want to save your changes? PDF 파일 + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5314,6 +5368,21 @@ Do you want to exit without saving your data? '%1' 파일을 열 수 없습니다. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + File not found + + + The file '%1' cannot be opened. + '%1' 파일을 열 수 없습니다. + + Gui::RevitNavigationStyle @@ -6645,6 +6714,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7851,6 +7964,21 @@ Choose 'Abort' to abort 최근 파일 목록 + + StdCmdRecentMacros + + Macro + 매크로 + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_lt.qm b/src/Gui/Language/FreeCAD_lt.qm index d248a063a1..1789cb7b37 100644 Binary files a/src/Gui/Language/FreeCAD_lt.qm and b/src/Gui/Language/FreeCAD_lt.qm differ diff --git a/src/Gui/Language/FreeCAD_lt.ts b/src/Gui/Language/FreeCAD_lt.ts index f4a7658b17..1141f568a3 100644 --- a/src/Gui/Language/FreeCAD_lt.ts +++ b/src/Gui/Language/FreeCAD_lt.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Nėra tokio mygtuko + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Mygtukai - - Clear - Išvalyti - Print Reference Spausdinti šaltinį @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Rutulinio manipuliatoriaus mygtukai + + Reset + Atstatyti + Gui::Dialog::DlgDisplayProperties @@ -2101,10 +2109,6 @@ Prašome nurodti kitą aplanką. Filter by type Atrinkta pagal rūšį - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2117,6 +2121,10 @@ Prašome nurodti kitą aplanką. Clear Išvalyti + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3214,6 +3222,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3514,6 +3550,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4678,6 +4718,20 @@ Ar norite įrašyti keitimus? PDF failas + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5313,6 +5367,21 @@ Ar norite išeiti neišsaugoję duomenų? Neįmanoma atverti failo „%1“. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Failas nerastas + + + The file '%1' cannot be opened. + Neįmanoma atverti failo „%1“. + + Gui::RevitNavigationStyle @@ -6643,6 +6712,50 @@ Choose 'Abort' to abort Override colors... Pakeisti spalvas... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7849,6 +7962,21 @@ Choose 'Abort' to abort Paskiausiai naudotų failų sąrašas + + StdCmdRecentMacros + + Macro + Makrokomandos + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index dc07ad7066..4bfcf1dfbf 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 5d453f4ec2..5393e90d1e 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Buiten het bereik + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ Als dit niet is aangevinkt, dan moet de eigenschap uniek worden benoemd en is ka Buttons Knoppen - - Clear - Wissen - Print Reference Afdruk referentie @@ -1070,6 +1074,10 @@ Als dit niet is aangevinkt, dan moet de eigenschap uniek worden benoemd en is ka Spaceball Buttons Spaceball Buttons + + Reset + Herstel + Gui::Dialog::DlgDisplayProperties @@ -2100,10 +2108,6 @@ Kies een andere map, alstublieft. Filter by type Filteren op type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Indien ingeschakeld, dan zal de 3D-weergaveselectie gesynchroniseerd worden met de volledige objecthiërarchie. - Sync sub-object selection Synchroniseer subobject selectie @@ -2116,6 +2120,10 @@ Kies een andere map, alstublieft. Clear Wissen + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3213,6 +3221,34 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> The directory in which the application will search for macros De map waarin de applicatie naar macro's zoekt + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3513,6 +3549,10 @@ De kanteling van de muis wordt niet uitgeschakeld door deze instelling.Imperial for Civil Eng (ft, ft/sec) Imperial voor burgerlijke ingenieurs (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4675,6 +4715,20 @@ Wilt u uw wijzigingen opslaan? PDF-bestand + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5307,6 +5361,21 @@ Do you want to exit without saving your data? Het bestand '%1' kan niet worden geopend. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Bestand niet gevonden + + + The file '%1' cannot be opened. + Het bestand '%1' kan niet worden geopend. + + Gui::RevitNavigationStyle @@ -6634,6 +6703,50 @@ Kies 'Afbreken' om af te breken Override colors... Kleuren overschrijven... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7840,6 +7953,21 @@ Kies 'Afbreken' om af te breken Lijst met recente bestanden + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_no.qm b/src/Gui/Language/FreeCAD_no.qm index 0b2b472ded..5d9dd597de 100644 Binary files a/src/Gui/Language/FreeCAD_no.qm and b/src/Gui/Language/FreeCAD_no.qm differ diff --git a/src/Gui/Language/FreeCAD_no.ts b/src/Gui/Language/FreeCAD_no.ts index 6079b52382..5b8be7ab0a 100644 --- a/src/Gui/Language/FreeCAD_no.ts +++ b/src/Gui/Language/FreeCAD_no.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Utenfor området + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Knapper - - Clear - Tøm - Print Reference Utskriftsreferanse @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Romball knapper + + Reset + Tilbakestill + Gui::Dialog::DlgDisplayProperties @@ -1377,7 +1385,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Language of the application's user interface - Language of the application's user interface + Språk i applikasjonens brukergrensesnitt How many files should be listed in recent files list @@ -2101,10 +2109,6 @@ Vennligst angi en annen mappe. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2117,6 +2121,10 @@ Vennligst angi en annen mappe. Clear Tøm + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2446,7 +2454,7 @@ but slower response to any scene changes. Auto - Auto + Automatisk Distributed @@ -3215,6 +3223,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3515,6 +3551,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4680,6 +4720,20 @@ Vil du lagre endringene? PDF file + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5314,6 +5368,21 @@ Do you want to exit without saving your data? Filen '%1' kan ikke åpnes. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Fant ikke filen + + + The file '%1' cannot be opened. + Filen '%1' kan ikke åpnes. + + Gui::RevitNavigationStyle @@ -6641,6 +6710,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7847,6 +7960,21 @@ Choose 'Abort' to abort Listen over nylig brukte filer + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index b33902b03b..957602e5b1 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 702f911b86..9df070e795 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -102,22 +102,22 @@ CmdViewMeasureClearAll Measure - Pomiary + Wymiarowanie Clear measurement - Wyczyść pomiar + Wyczyść wymiary CmdViewMeasureToggleAll Measure - Pomiary + Wymiarowanie Toggle measurement - Włącz/wyłącz pomiary + Przełącz wymiarowanie @@ -265,7 +265,7 @@ Gui::AutoSaver Please wait until the AutoRecovery file has been saved... - Proszę czakać aż plik AutoOdzyskiwania zostanie zapisany... + Proszę czekać aż plik Automatycznego Odzyskiwania zostanie zapisany... @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Poza zakresem + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Przyciski - - Clear - Wyczyść - Print Reference Wydrukuj Odnośniki @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Przyciski Spaceball'a + + Reset + Reset + Gui::Dialog::DlgDisplayProperties @@ -1336,7 +1344,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Auto load module after start up: - Po uruchomieniu, załaduj automatycznie moduł: + Po uruchomieniu, załaduj automatycznie środowisko pracy: Language @@ -1368,7 +1376,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Python console - Konsola Pythona + Konsola Python Enable word wrap @@ -2102,10 +2110,6 @@ Proszę podać inny katalog. Filter by type Filtruj według typu - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Jeśli włączone, to widok 3D będzie synchroniczny z pełną hierarchią obiektów. - Sync sub-object selection Synchronizuj wybór obiektu podrzędnego @@ -2118,6 +2122,10 @@ Proszę podać inny katalog. Clear Wyczyść + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2267,11 +2275,11 @@ z konsoli Pythona do panelu Widoku Raportu Normal messages will be recorded - Normal messages will be recorded + Zwykłe wiadomości o błędach będą rejestrowane Record normal messages - Record normal messages + Nagrywaj zwykłe wiadomości @@ -2769,7 +2777,7 @@ opening or creation Save AutoRecovery information every - Zapisz informacje AutoOdzyskiwania co + Zapisz informacje Automatycznego Odzyskiwania co Add the program logo to the generated thumbnail @@ -3041,19 +3049,19 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Icon 32 x 32 - Ikona 32 x 32 + Ikonka 32 x 32 Icon 64 x 64 - Ikona 64 x 64 + Ikonka 64 x 64 Icon 128 x 128 - Ikona 128 x 128 + Ikonka 128 x 128 Standard sizes: - Standardowe wymiary: + Rozmiary standardowe: &Height: @@ -3213,6 +3221,34 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com>The directory in which the application will search for macros Folder, w którym aplikacja będzie poszukiwać makrodefinicji + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3292,7 +3328,7 @@ Turntable: część będzie obracana wokół osi z. Trackball - Manipulator kulkowy + Trackball New document scale @@ -3419,7 +3455,7 @@ Obracanie przy pomocy myszki nie jest blokowane. Units settings - Jednostki-Ustawienia + Ustawienia jednostek Standard (mm/kg/s/degree) @@ -3507,12 +3543,16 @@ Obracanie przy pomocy myszki nie jest blokowane. Building US (ft-in/sqft/cft) - Building US (ft-in/sqft/cft) + Budowlany US (ft-in/sqft/cft) Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -3576,7 +3616,7 @@ Większa wartość ułatwia wybieranie, ale może uniemożliwić wybór małych Background color for the model view - Background color for the model view + Kolor tła widoku modelu Background will have selected color @@ -3646,11 +3686,11 @@ Większa wartość ułatwia wybieranie, ale może uniemożliwić wybór małych Input the source value and unit - Input the source value and unit + Wprowadź wartość i jednostkę Input here the unit for the result - Input here the unit for the result + Wprowadź jednostkę dla wyniku Result @@ -3678,19 +3718,19 @@ System preferencji to ten, który jest ustawiony w preferencjach ogólnych. Decimals: - Decimals: + Miejsca po przecinku: Decimals for the Quantity - Decimals for the Quantity + Miejsca dziesiętne dla ilości Unit category: - Unit category: + Kategoria jednostki: Unit category for the Quantity - Unit category for the Quantity + Kategoria jednostki dla ilości Copy the result into the clipboard @@ -3768,7 +3808,7 @@ System preferencji to ten, który jest ustawiony w preferencjach ogólnych. <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> - <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> + <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Uwaga:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">Zmiany zostaną wprowadzone przy następnym uruchomieniu programu @@ -4233,15 +4273,15 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Around y-axis: - Around y-axis: + W okolicy osi Y: Around z-axis: - Around z-axis: + W okolicy osi Z: Around x-axis: - Around x-axis: + W okolicy osi X: Rotation around the x-axis @@ -4279,7 +4319,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. winpdb - winpdb + winpdb Password: @@ -4287,7 +4327,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. VS Code - VS Code + VS Code Address: @@ -4295,11 +4335,11 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Port: - Port: + Port: Redirect output - Redirect output + Przekieruj wyjście @@ -4386,15 +4426,15 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Gui::DlgObjectSelection Object selection - Object selection + Wybór obiektu The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. - The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. + Wybrane obiekty zawierają inne zależności. Proszę wybrać obiekty do eksportu. Wszystkie zależności są domyślnie wybrane. Dependency - Dependency + Zależność Document @@ -4406,11 +4446,11 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. State - State + Stan Hierarchy - Hierarchy + Hierarchia Selected @@ -4418,7 +4458,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Partial - Partial + Częściowo @@ -4494,27 +4534,27 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Display message types - Display message types + Wyświetl typy wiadomości Normal messages - Normal messages + Zwykłe wiadomości Log messages - Log messages + Wiadomości dziennika Warnings - Warnings + Ostrzeżenia Errors - Errors + Błędy Show report view on - Show report view on + Pokaż widok raportu na @@ -4525,7 +4565,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Python console - Konsola Pythona + Konsola Python @@ -4608,7 +4648,7 @@ Kolumna "Stan" pokazuje, czy dokument może być odzyskany. Picked object list - Picked object list + Wybrana lista obiektów @@ -4676,6 +4716,20 @@ Do you want to save your changes? Plik PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -4936,7 +4990,7 @@ Do you want to save your changes? The exported object contains external link. Please save the documentat least once before exporting. - The exported object contains external link. Please save the documentat least once before exporting. + Wyeksportowany obiekt zawiera link zewnętrzny. Proszę zapisać dokument przynajmniej raz przed wyeksportowaniem. To link to external objects, the document must be saved at least once. @@ -5149,7 +5203,7 @@ How do you want to proceed? property - property + właściwość Show all @@ -5203,7 +5257,7 @@ Do you want to exit without saving your data? Python console - Konsola Pythona + Konsola Python Unhandled PyCXX exception. @@ -5308,6 +5362,21 @@ Do you want to exit without saving your data? Plik '%1' nie może być otwarty. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Nie znaleziono pliku + + + The file '%1' cannot be opened. + Plik '%1' nie może być otwarty. + + Gui::RevitNavigationStyle @@ -5472,7 +5541,7 @@ Do you want to specify another directory? Box select - Box select + Zaznacz obszar On-top when selected @@ -5483,7 +5552,7 @@ Do you want to specify another directory? Gui::TaskView::TaskAppearance Plot mode: - Tryb kreślenia: + Tryb rysowania: Point size: @@ -5499,7 +5568,7 @@ Do you want to specify another directory? Appearance - Wygląd + Wygląd zewnętrzny Document window: @@ -5524,7 +5593,7 @@ Do you want to specify another directory? Gui::TaskView::TaskSelectLinkProperty Appearance - Wygląd + Wygląd zewnętrzny ... @@ -5750,7 +5819,7 @@ Do you want to specify another directory? Gui::TreeWidget Create group... - Tworzenie grup... + Utwórz grupę... Create a group @@ -5858,7 +5927,7 @@ Do you want to specify another directory? Allow partial recomputes - Allow partial recomputes + Zezwalaj na częściowe przeliczanie Enable or disable recomputating editing object when 'skip recomputation' is enabled @@ -5866,11 +5935,11 @@ Do you want to specify another directory? Recompute object - Recompute object + Przelicz obiekt Recompute the selected object - Recompute the selected object + Przelicz wybrany obiekt (but must be executed) @@ -6078,7 +6147,7 @@ Do you want to specify another directory? Python console - Konsola Pythona + Konsola Python Display properties @@ -6475,27 +6544,27 @@ Be aware the point where you click matters. The exported object contains external link. Please save the documentat least once before exporting. - The exported object contains external link. Please save the documentat least once before exporting. + Wyeksportowany obiekt zawiera link zewnętrzny. Proszę zapisać dokument przynajmniej raz przed wyeksportowaniem. Delete failed - Delete failed + Usunięcie nie powiodło się Dependency error - Dependency error + Błąd zależności Copy selected - Copy selected + Kopiuj zaznaczone Copy active document - Copy active document + Kopiuj aktywny dokument Copy all documents - Copy all documents + Kopiuj wszystkie dokumenty Paste @@ -6503,7 +6572,7 @@ Be aware the point where you click matters. Expression error - Expression error + Błąd wyrażenia Failed to parse some of the expressions. @@ -6529,11 +6598,11 @@ Please check the Report View for more details. Create link group failed - Create link group failed + Tworzenie grupy łaczy nie powiodło się Create link failed - Create link failed + Tworzenie odnośnika nie powiodło się Failed to create relative link @@ -6557,7 +6626,7 @@ Please check the Report View for more details. Invalid name - Invalid name + Nieprawidłowa nazwa The property name or group name must only contain alpha numericals, @@ -6579,7 +6648,7 @@ underscore, and must not start with a digit. Save dependent files - Save dependent files + Zapisz zależne pliki The file contains external dependencies. Do you want to save the dependent files, too? @@ -6587,7 +6656,7 @@ underscore, and must not start with a digit. Failed to save document - Failed to save document + Nie udało się zapisać dokumentu Documents contains cyclic dependencies. Do you still want to save them? @@ -6619,7 +6688,7 @@ Choose 'Abort' to abort Apply answer to all - Apply answer to all + Zastosuj odpowiedź dla wszystkich Drag & drop failed @@ -6627,7 +6696,51 @@ Choose 'Abort' to abort Override colors... - Override colors... + Zastąp kolory... + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Czy na pewno chcesz kontynuować? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path @@ -6660,7 +6773,7 @@ Choose 'Abort' to abort Box selection - Pole wyboru + Zaznacz obszar @@ -7084,7 +7197,7 @@ Choose 'Abort' to abort Expression actions - Expression actions + Akcje z wyrażeniami @@ -7280,7 +7393,7 @@ Choose 'Abort' to abort Link actions - Link actions + Akcje z łączami @@ -7291,11 +7404,11 @@ Choose 'Abort' to abort Import links - Import links + Importuj łącza Import selected external link(s) - Import selected external link(s) + Importuj wybrane łącza zewnętrzne @@ -7306,11 +7419,11 @@ Choose 'Abort' to abort Import all links - Import all links + Importuj wszystkie łącza Import all links of the active document - Import all links of the active document + Importuj wszystkie łącza aktywnego dokumentu @@ -7321,11 +7434,11 @@ Choose 'Abort' to abort Make link - Make link + Utwórz łącze Create a link to the selected object(s) - Create a link to the selected object(s) + Utwórz łącze do zaznaczonych obiektów @@ -7336,11 +7449,11 @@ Choose 'Abort' to abort Make link group - Make link group + Stwórz grupę łączy Create a group of links - Create a group of links + Utwórz grupę łączy @@ -7351,11 +7464,11 @@ Choose 'Abort' to abort Make sub-link - Make sub-link + Stwórz łącze podrzędne Create a sub-object or sub-element link - Create a sub-object or sub-element link + Utwórz obiekt zależny lub łącze do elementu podrzędnego @@ -7366,11 +7479,11 @@ Choose 'Abort' to abort Replace with link - Replace with link + Zastąp przez łącze Replace the selected object(s) with link - Replace the selected object(s) with link + Zastąp zaznaczone obiekty łączem @@ -7396,7 +7509,7 @@ Choose 'Abort' to abort Select all links - Select all links + Zaznacz wszystkie łącza Select all links to the current selected object @@ -7411,11 +7524,11 @@ Choose 'Abort' to abort Go to linked object - Go to linked object + Przejdź do połączonego obiektu Select the linked object and switch to its owner document - Select the linked object and switch to its owner document + Wybierz połączony obiekt i przełącz się na dokument źródłowy @@ -7426,7 +7539,7 @@ Choose 'Abort' to abort Go to the deepest linked object - Go to the deepest linked object + Przejdź do najgłębszego połączonego obiektu Select the deepest linked object and switch to its owner document @@ -7549,7 +7662,7 @@ Choose 'Abort' to abort Measures distance between two selected objects - Zmierz odległość między dwoma wybranymi obiektami + Zwymiaruj odległość między dwoma wybranymi obiektami Measure distance @@ -7835,6 +7948,21 @@ Choose 'Abort' to abort Ostatnio otwierane + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8053,7 +8181,7 @@ Choose 'Abort' to abort Appearance... - Wygląd... + Wygląd zewnętrzny... Sets the display properties of the selected object @@ -8338,7 +8466,7 @@ Choose 'Abort' to abort TreeView behavior options and actions - TreeView behavior options and actions + Opcje i działania na Widoku drzewa @@ -8698,7 +8826,7 @@ Choose 'Abort' to abort Rotate the view by 90° counter-clockwise - Rotate the view by 90° counter-clockwise + Obróć widok w lewo o 90° @@ -8713,7 +8841,7 @@ Choose 'Abort' to abort Rotate the view by 90° clockwise - Rotate the view by 90° clockwise + Obróć widok w prawo o 90° @@ -8885,11 +9013,11 @@ Choose 'Abort' to abort Initiate dragging - Initiate dragging + Rozpocznij przeciąganie Initiate dragging of current selected tree items - Initiate dragging of current selected tree items + Rozpocznij przeciąganie zaznaczonych elementów drzewa @@ -8915,11 +9043,11 @@ Choose 'Abort' to abort Pre-selection - Pre-selection + Wybór wstępny Preselect the object in 3D view when mouse over the tree item - Preselect the object in 3D view when mouse over the tree item + Zaznacz obiekt w widoku 3D kiedy kursor myszki znajduje się nad pozycją drzewa @@ -8964,7 +9092,7 @@ Choose 'Abort' to abort Single document - Single document + Pojedynczy dokument @@ -8979,7 +9107,7 @@ Choose 'Abort' to abort Auto adjust placement on drag and drop objects across coordinate systems - Auto adjust placement on drag and drop objects across coordinate systems + Automatyczne dostosowywanie położenia obiektów w układach współrzędnych podczas przeciągania i upuszczania @@ -8990,11 +9118,11 @@ Choose 'Abort' to abort Sync selection - Sync selection + Synchronizuj wybrane Auto expand tree item when the corresponding object is selected in 3D view - Auto expand tree item when the corresponding object is selected in 3D view + Automatycznie rozwiń drzewko gdy odpowiedni obiekt jest zaznaczony w oknie widoku 3D diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index ec9243c06a..b4d4d99c38 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 4849195b77..79038dae41 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fora do intervalo + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botões - - Clear - Limpar - Print Reference Imprimir referência @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Botões do Spaceball + + Reset + Restaurar + Gui::Dialog::DlgDisplayProperties @@ -2096,10 +2104,6 @@ Por favor especifique outro diretório. Filter by type Filtrar por tipo - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sincronizar seleção de sub-objeto @@ -2112,6 +2116,10 @@ Por favor especifique outro diretório. Clear Limpar + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2177,11 +2185,11 @@ Por favor especifique outro diretório. Warnings will be recorded - Warnings will be recorded + Avisos serão gravados Error messages will be recorded - Error messages will be recorded + Mensagens de erro serão gravadas When an error has occurred, the Report View dialog becomes visible @@ -2265,7 +2273,7 @@ from Python console to Report view panel Record normal messages - Record normal messages + Gravar mensagens normais @@ -2387,7 +2395,7 @@ will be shown at the lower left corner in opened files Remember active workbench by tab - Remember active workbench by tab + Lembrar da bancada ativa por aba Rendering @@ -2449,7 +2457,7 @@ but slower response to any scene changes. Centralized - Centralized + Centralizado What kind of multisample anti-aliasing is used @@ -2457,7 +2465,7 @@ but slower response to any scene changes. Transparent objects: - Transparent objects: + Objetos transparentes: Render types of transparent objects @@ -2493,15 +2501,15 @@ bounding box size of the 3D object that is currently displayed. Backlight color - Backlight color + Cor de fundo Intensity - Intensity + Intensidade Intensity of the backlight - Intensity of the backlight + Intensidade da luz de fundo Objects will be projected in orthographic projection @@ -2519,7 +2527,7 @@ opening or creation Show axis cross by default - Show axis cross by default + Mostrar eixo do cruzamento por padrão @@ -2784,7 +2792,7 @@ opening or creation How many Undo/Redo steps should be recorded - How many Undo/Redo steps should be recorded + Quantos passos de Desfazer/Refazer devem ser registrados Allow user aborting document recomputation by pressing ESC. @@ -3113,7 +3121,7 @@ You can also use the form: John Doe <john@doe.com> Creation method: - Creation method: + Método de criação: @@ -3209,6 +3217,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3218,11 +3254,11 @@ You can also use the form: John Doe <john@doe.com> Navigation cube - Navigation cube + Cubo de navegação Steps by turn - Steps by turn + Passos por turno Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) @@ -3234,7 +3270,7 @@ You can also use the form: John Doe <john@doe.com> Corner where navigation cube is shown - Corner where navigation cube is shown + Canto onde o cubo de navegação é mostrado Top left @@ -3306,7 +3342,7 @@ The value is the diameter of the sphere to fit on the screen. Enable animated rotations - Enable animated rotations + Habilitar rotações animadas Enable animation @@ -3509,6 +3545,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -3558,11 +3598,11 @@ Mouse tilting is not disabled by this setting. Enable preselection and highlight by specified color - Enable preselection and highlight by specified color + Ativar a pré-seleção e destaque por cor especificada Enable selection highlighting and use specified color - Enable selection highlighting and use specified color + Habilitar seleção de realce e usar cor especificada Area for picking elements in 3D view. @@ -3576,7 +3616,7 @@ Larger value eases to pick things, but can make small features impossible to sel Background will have selected color - Background will have selected color + Fundo terá a cor selecionada Color gradient will get selected color as middle color @@ -4672,6 +4712,20 @@ Deseja salvar as alterações? Arquivo PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5305,6 +5359,21 @@ Do you want to exit without saving your data? Não é possível abrir o arquivo '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Arquivo não encontrado + + + The file '%1' cannot be opened. + Não é possível abrir o arquivo '%1'. + + Gui::RevitNavigationStyle @@ -5618,7 +5687,7 @@ Do you want to specify another directory? Korean - Korean + Coreano Russian @@ -5638,7 +5707,7 @@ Do you want to specify another directory? Portuguese, Brazilian - Portuguese, Brazilian + Português do Brasil Portuguese @@ -5694,7 +5763,7 @@ Do you want to specify another directory? Catalan - Catalan + Catalão Galician @@ -5706,15 +5775,15 @@ Do you want to specify another directory? Filipino - Filipino + Filipino Indonesian - Indonesian + Indonésio Lithuanian - Lithuanian + Lituano Valencian @@ -5722,11 +5791,11 @@ Do you want to specify another directory? Arabic - Arabic + Árabe Vietnamese - Vietnamese + Vietnamita @@ -5823,7 +5892,7 @@ Do you want to specify another directory? Show hidden items - Show hidden items + Mostrar itens ocultos Show hidden tree view items @@ -5831,23 +5900,23 @@ Do you want to specify another directory? Hide item - Hide item + Ocultar item Hide the item in tree - Hide the item in tree + Ocultar o item na árvore Close document - Close document + Fechar documento Close the document - Close the document + Fechar o documento Reload document - Reload document + Recarregar documento Reload a partially loaded document @@ -5871,18 +5940,18 @@ Do you want to specify another directory? (but must be executed) - (but must be executed) + (mas deve ser executado) Gui::VectorListEditor Vectors - Vectors + Vetores Table - Table + Tabela ... @@ -6480,7 +6549,7 @@ Be aware the point where you click matters. Dependency error - Dependency error + Erro de dependência Copy selected @@ -6488,11 +6557,11 @@ Be aware the point where you click matters. Copy active document - Copy active document + Copiar documento ativo Copy all documents - Copy all documents + Copiar todos os documentos Paste @@ -6510,15 +6579,15 @@ Please check the Report View for more details. Failed to paste expressions - Failed to paste expressions + Falha ao colar expressões Simple group - Simple group + Agrupamento simples Group with links - Group with links + Agrupar com links Group with transform links @@ -6546,7 +6615,7 @@ Please check the Report View for more details. Failed to import links - Failed to import links + Falha ao importar links Failed to import all links @@ -6554,7 +6623,7 @@ Please check the Report View for more details. Invalid name - Invalid name + Nome inválido The property name or group name must only contain alpha numericals, @@ -6626,6 +6695,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7393,7 +7506,7 @@ Choose 'Abort' to abort Select all links - Select all links + Selecionar todos os links Select all links to the current selected object @@ -7408,7 +7521,7 @@ Choose 'Abort' to abort Go to linked object - Go to linked object + Ir para o objeto vinculado Select the linked object and switch to its owner document @@ -7438,7 +7551,7 @@ Choose 'Abort' to abort Unlink - Unlink + Desvincular Strip on level of link @@ -7832,6 +7945,21 @@ Choose 'Abort' to abort Lista de arquivos recentes + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -7900,11 +8028,11 @@ Choose 'Abort' to abort Save All - Save All + Salvar Tudo Save all opened document - Save all opened document + Salvar todos documentos abertos @@ -7960,7 +8088,7 @@ Choose 'Abort' to abort &Back - &Back + &Voltar Go back to previous selection @@ -8035,11 +8163,11 @@ Choose 'Abort' to abort &Send to Python Console - &Send to Python Console + &Enviar para o Console Python Sends the selected object to the Python console - Sends the selected object to the Python console + Envia o objeto selecionado para o console do Python @@ -8110,11 +8238,11 @@ Choose 'Abort' to abort Add text document - Add text document + Adicionar documento de texto Add text document to active document - Add text document to active document + Adicionar documento de texto ao documento ativo @@ -8286,7 +8414,7 @@ Choose 'Abort' to abort Collapse selected item - Collapse selected item + Recolher item selecionado Collapse currently selected tree items @@ -8301,7 +8429,7 @@ Choose 'Abort' to abort Expand selected item - Expand selected item + Expandir item selecionado Expand currently selected tree items @@ -8316,7 +8444,7 @@ Choose 'Abort' to abort Select all instances - Select all instances + Selecionar todas as instâncias Select all instances of the current selected object @@ -8901,7 +9029,7 @@ Choose 'Abort' to abort Multi document - Multi document + Multi-documento @@ -8912,7 +9040,7 @@ Choose 'Abort' to abort Pre-selection - Pre-selection + Pré-seleção Preselect the object in 3D view when mouse over the tree item @@ -8927,7 +9055,7 @@ Choose 'Abort' to abort Record selection - Record selection + Gravar seleção Record selection in tree view in order to go back/forward using navigation button @@ -8961,7 +9089,7 @@ Choose 'Abort' to abort Single document - Single document + Documento único diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 0a22ca6468..f8a9b88abf 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 8cee096a2a..b6d1855b38 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fora do intervalo + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botões - - Clear - Limpar - Print Reference Referência de Impressão @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Botões da Spaceball + + Reset + Reiniciar + Gui::Dialog::DlgDisplayProperties @@ -2099,10 +2107,6 @@ Por favor, indique outra pasta. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2115,6 +2119,10 @@ Por favor, indique outra pasta. Clear Limpar + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3212,6 +3220,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3512,6 +3548,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4676,6 +4716,20 @@ Deseja guardar as suas alterações? Ficheiro PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5310,6 +5364,21 @@ Deseja sair sem guardar os seus dados? Não foi possível abrir o ficheiro '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Ficheiro não encontrado + + + The file '%1' cannot be opened. + Não foi possível abrir o ficheiro '%1'. + + Gui::RevitNavigationStyle @@ -6635,6 +6704,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7841,6 +7954,21 @@ Choose 'Abort' to abort Lista de ficheiros recentes + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index 677b4b796d..a88a399ef9 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index dbf6c5a9a1..44c7330ea6 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Valoare incorecta + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Butoane - - Clear - Șterge - Print Reference Imprimare - referinta @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Butoane Spaceball + + Reset + Reinițializare + Gui::Dialog::DlgDisplayProperties @@ -2098,10 +2106,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2114,6 +2118,10 @@ Specify another directory, please. Clear Șterge + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3212,6 +3220,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3512,6 +3548,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4675,6 +4715,20 @@ Doriți să salvați modificările? Fişier PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5309,6 +5363,21 @@ Doriți să ieşiți fără a salva datele dumneavoastră? Fișierul '%1' nu poate fi deschis. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Fișier nu a fost găsit + + + The file '%1' cannot be opened. + Fișierul '%1' nu poate fi deschis. + + Gui::RevitNavigationStyle @@ -6635,6 +6704,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7841,6 +7954,21 @@ Choose 'Abort' to abort Lista de fişiere recente + + StdCmdRecentMacros + + Macro + Macrocomandă + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index 73c3e1cce4..700033a2ee 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 8edeafe996..2a36a5243f 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Вне диапазона + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Кнопки - - Clear - Очистить - Print Reference Напечатать шпаргалку @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Кнопки пространственного манипулятора + + Reset + Сброс + Gui::Dialog::DlgDisplayProperties @@ -1175,15 +1183,15 @@ If this is not ticked, then the property must be uniquely named, and it is acces Metalized - Металлик + Металлизированный Neon GNC - Неон GNC + Neon GNC Neon PHC - Неон PHC + Neon PHC Obsidian @@ -2101,10 +2109,6 @@ Specify another directory, please. Filter by type Фильтр по типу - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Если включено, то выбор вида 3D будет синхронизироваться с полной иерархией объектов. - Sync sub-object selection Синхронизировать выбор субобъектов @@ -2117,6 +2121,10 @@ Specify another directory, please. Clear Очистить + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Если включено, то выбор вида 3D будет синхронизироваться с полной иерархией объектов. + Gui::Dialog::DlgReportView @@ -2266,11 +2274,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + Обычные сообщения будут записаны Record normal messages - Record normal messages + Записывать обычные сообщения @@ -2434,10 +2442,10 @@ but slower response to any scene changes. 'Кэширование рендера' - по-другому называется 'Ускорение рендера'. Для его достижения доступно 3 опции: 1) 'Авто' (по умолчанию), пусть Coin3D сам решит, где кэшировать. -2) 'Распределённое', вручную включает кэш для всех корневых узлов провайдера. -3) 'Централизованное', вручную выключает кэш во всех узлах провайдера просмотра и -только в корневом узле графа сцены. Это обеспечивает быструю скорость рендера-отрисовки, -но медленнее реагирует на любые изменения сцены. +2) 'Распределённый', вручную включает кэш для всех корневых узлов провайдера. +3) 'Централизованный', вручную выключает кэш во всех узлах провайдера просмотра и +кэширует только в корневом узле графа сцены. Это обеспечивает самую высокую скорость визуализации, +но более медленную реакцию на любые изменения сцены. Auto @@ -2445,7 +2453,7 @@ but slower response to any scene changes. Distributed - Распределенно + Распределенный Centralized @@ -2765,8 +2773,7 @@ opening or creation Save AutoRecovery information every - Автосохранение каждые - + Автосохранение каждые Add the program logo to the generated thumbnail @@ -3126,7 +3133,7 @@ Opening mode: If you defined a hinge in this component or any other earlier in t Gui::Dialog::DlgSettingsImageImp Offscreen (New) - Offscreen (New) + Offscreen (новый) Offscreen (Old) @@ -3215,6 +3222,34 @@ Opening mode: If you defined a hinge in this component or any other earlier in t The directory in which the application will search for macros Каталог, в котором приложение будет искать макросы + + Recent macros menu + Меню недавних макросов + + + Size of recent macro list + Размер списка недавних макросов + + + How many macros should be listed in recent macros list + Количество файлов в списке последних файлов + + + Shortcut count + Количество ярлыков + + + How many recent macros should have shortcuts + Сколько последних макросов должно иметь ярлыки + + + Keyboard Modifiers + Модификаторы клавиатуры + + + Keyboard modifiers, default = Ctrl+Shift+ + Модификаторы клавиатуры, по умолчанию = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3515,6 +3550,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Имперская для Гражданских инженеров (футы, футы/с) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4497,27 +4536,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Показать типы сообщений Normal messages - Normal messages + Обычные сообщения Log messages - Log messages + Журнал сообщений Warnings - Warnings + Предупреждения Errors - Errors + Ошибки Show report view on - Show report view on + Показать отчет на @@ -4587,7 +4626,7 @@ The 'Status' column shows whether the document could be recovered. Mark to recompute - Пометьте для пересчета + Отметить для пересчета Mark this object to be recomputed @@ -4681,6 +4720,20 @@ Do you want to save your changes? Файл PDF + + Gui::ExpressionLineEdit + + Exact match + Точное совпадение + + + + Gui::ExpressionTextEdit + + Exact match + Точное совпадение + + Gui::FileChooser @@ -5313,6 +5366,21 @@ Do you want to exit without saving your data? Не удаётся открыть файл '%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Запуск макроса %1 (Shift+клик для редактирования): %2 + + + File not found + Файл не найден + + + The file '%1' cannot be opened. + Не удаётся открыть файл '%1'. + + Gui::RevitNavigationStyle @@ -5810,7 +5878,7 @@ Do you want to specify another directory? Mark to recompute - Пометьте для пересчета + Отметить для пересчета Mark this object to be recomputed @@ -6639,6 +6707,50 @@ Choose 'Abort' to abort Override colors... Переопределить цвета... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Обнаружен идентичный физический путь. Это может привести к нежелательной перезаписи существующего документа! + + + + + Are you sure you want to continue? + Вы уверены, что хотите продолжить? + + + + +Please check report view for more... + + +Пожалуйста, ознакомьтесь с отчетом, чтобы узнать больше... + + + + +Pyhsical path: + + +Физический путь: + + + +Document: + +Документ: + + + + Path: + + Путь: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7845,6 +7957,21 @@ Choose 'Abort' to abort Список недавно открытых файлов + + StdCmdRecentMacros + + Macro + Макрос + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8363,7 +8490,7 @@ Choose 'Abort' to abort Undo exactly one action - Отменить ровно одно действие + Отменить только одно действие diff --git a/src/Gui/Language/FreeCAD_sk.qm b/src/Gui/Language/FreeCAD_sk.qm index 998fe23292..b254d9ca77 100644 Binary files a/src/Gui/Language/FreeCAD_sk.qm and b/src/Gui/Language/FreeCAD_sk.qm differ diff --git a/src/Gui/Language/FreeCAD_sk.ts b/src/Gui/Language/FreeCAD_sk.ts index 7cad42903c..ebe772ca7c 100644 --- a/src/Gui/Language/FreeCAD_sk.ts +++ b/src/Gui/Language/FreeCAD_sk.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Mimo rozsahu + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Tlačidlá - - Clear - Vyčistiť - Print Reference Tlač odkazu @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Tlačidlá Spaceballu + + Reset + Reset + Gui::Dialog::DlgDisplayProperties @@ -2097,10 +2105,6 @@ Určite iný adresár. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2113,6 +2117,10 @@ Určite iný adresár. Clear Vyčistiť + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3211,6 +3219,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3511,6 +3547,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4677,6 +4717,20 @@ Chcete uložiť zmeny? Súbor PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5311,6 +5365,21 @@ Chcete skončiť bez uloženia vašich údajov? Súbor '%1' nemožno otvoriť. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Súbor sa nenašiel + + + The file '%1' cannot be opened. + Súbor '%1' nemožno otvoriť. + + Gui::RevitNavigationStyle @@ -6642,6 +6711,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Cesta: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7848,6 +7961,21 @@ Choose 'Abort' to abort Zoznam obľúbených súborov + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index 74201bfbdd..07902a057e 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 2988c14201..bdc8b4cbf9 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -243,7 +243,7 @@ Fixed object - Pritrjeni predmet + Nepremičen predmet @@ -272,15 +272,15 @@ Gui::BlenderNavigationStyle Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Press SHIFT and middle mouse button - Pritisnite Shift in srednji miškin gumb + Pritisnite Shift in srednjo miškino tipko Press middle mouse button - Pritisnite srednjmiškin gumb + Pritisnite srednjo miškino tipko Scroll middle mouse button @@ -291,11 +291,11 @@ Gui::CADNavigationStyle Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Press middle mouse button - Pritisnite srednjmiškin gumb + Pritisnite srednjo miškino tipko Press middle+left or middle+right button @@ -304,8 +304,8 @@ Scroll middle mouse button or keep middle button depressed while doing a left or right click and move the mouse up or down - Zavrtite srednji miškin gumb ali ga spustite, medtem ko -kliknete na levi ali desni gumb in premikate miško gor oz. dol + Zavrtite srednjo miškino tipko ali jo spustite, medtem ko +kliknete na levo oz. desno tipko in premikate miško gor oz. dol @@ -432,6 +432,14 @@ kliknete na levi ali desni gumb in premikate miško gor oz. dol Out Of Range Zunaj obsega + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -518,7 +526,7 @@ kliknete na levi ali desni gumb in premikate miško gor oz. dol Gui::Dialog::DemoMode View Turntable - Obračajoči pogled + Sukajoči pogled Speed @@ -623,11 +631,11 @@ In this case the prefix will be automatically trimmed when shown in the property However, the property is still used in a script with the full name, like 'obj.Group_Name'. If this is not ticked, then the property must be uniquely named, and it is accessed like 'obj.Name'. - Prefix the property name with the group name in the form 'Group_Name' to avoid conflicts with an existing property. -In this case the prefix will be automatically trimmed when shown in the property editor. -However, the property is still used in a script with the full name, like 'obj.Group_Name'. + Dodaj ime skupine kot predpono imenu lastnosti v obliki "Ime_skupine", da se izogne sporom z obstoječimi lastnostmi. +V tem primeru bo predpona pri prikazovanju v urejevalniku lastnosti samodejno odstranjena. +Neglede na to ima lastnost v skriptih še vedno polni naziv, kot npr. "obj.Ime_Skupine". -If this is not ticked, then the property must be uniquely named, and it is accessed like 'obj.Name'. +Če to ni označeno, je treba lastnost poimenovati z edinstvenimi imeni, dostopna pa je kot "obj.Ime". Prefix group name @@ -1020,7 +1028,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces %1 module not loaded - %1 module not loaded + Modul %1 ni naložen @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Gumbi - - Clear - Počisti - Print Reference Natisni sklic @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Gumbi 3D miške + + Reset + Ponastavi + Gui::Dialog::DlgDisplayProperties @@ -1333,7 +1341,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Enable splash screen at start up - Omogoči pozdravni zaslon ob zagonu + Omogoči pozdravno okno ob zagonu Auto load module after start up: @@ -1369,7 +1377,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Python console - Konzola Python + Pythonova ukazna miza Enable word wrap @@ -1377,7 +1385,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Language of the application's user interface - Language of the application's user interface + Jezik uporabniškega vmesnika programa How many files should be listed in recent files list @@ -1386,12 +1394,12 @@ If this is not ticked, then the property must be uniquely named, and it is acces Background of the main window will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Ozadje glavnega okna bo tlakovano s posebno sliko. +Za podrobnosti o sliki si oglejte FreeCAD Wiki. Style sheet how user interface will look like - Style sheet how user interface will look like + Slogovna predloga, ki določa videz uporabniškega vmesnika Choose your preference for toolbar icon size. You can adjust @@ -1419,9 +1427,9 @@ this according to your screen size or personal taste A Splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen - A Splash screen is a small loading window that is shown -when FreeCAD is launching. If this option is checked, FreeCAD will -display the splash screen + Pozdravno okno je majhno okno, ki se prikaže med nalaganje +FreeCADa ob zagonu. Če je ta možnost označena, +bo pozdravno okno prikazano Choose which workbench will be activated and shown @@ -1432,8 +1440,8 @@ after FreeCAD launches Words will be wrapped when they exceed available horizontal space in Python console - Words will be wrapped when they exceed available -horizontal space in Python console + Besede bodo deljene, ko presežejo razpložljivo +širino na Pythonovi ukazni mizi @@ -1468,7 +1476,7 @@ horizontal space in Python console TreeView and PropertyView - TreeView and PropertyView + Drevesni pogled in Pogled z lastnostmi Both @@ -1936,7 +1944,7 @@ Navedite drugo mapo. Gui::Dialog::DlgPreferences Preferences - Možnosti + Prednastavitve @@ -2102,10 +2110,6 @@ Navedite drugo mapo. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Navedite drugo mapo. Clear Počisti + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2139,7 +2147,7 @@ Navedite drugo mapo. Record error messages - Zapiši sporočila napak + Zabeleži sporočila napak Colors @@ -2179,7 +2187,7 @@ Navedite drugo mapo. Log messages will be recorded - Log messages will be recorded + Dnevniška sporočilo bodo zabeležena Warnings will be recorded @@ -2187,7 +2195,7 @@ Navedite drugo mapo. Error messages will be recorded - Error messages will be recorded + Sporočila o napakah bodo zabeležena When an error has occurred, the Report View dialog becomes visible @@ -2212,38 +2220,38 @@ on-screen while displaying the warning When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message - When a normal message has occurred, the Report View dialog becomes visible -on-screen while displaying the message + Ko pride do običajnega sporočila, bo pri prikazovanju sporočila na zaslonu postalo +vidno poročevalno pogovorno okno Show report view on normal message - Show report view on normal message + Prikaži poročevalni pogled pri običajnih sporočilih When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message - When a log message has occurred, the Report View dialog becomes visible -on-screen while displaying the log message + Ko pride do dnevniškega sporočila, bo pri prikazovanju zapisa na zaslonu postalo +vidno poročevalno pogovorno okno Show report view on log message - Show report view on log message + Prikaži poročevalni pogled pri dnevniškem sporočilu Font color for normal messages in Report view panel - Font color for normal messages in Report view panel + Barva pisave pri običajnih sporočilih in plošči poročevalnega pogleda Font color for log messages in Report view panel - Font color for log messages in Report view panel + Barva pisave pri dnevniških sporočilih in plošči poročevalnega pogleda Font color for warning messages in Report view panel - Font color for warning messages in Report view panel + Barva pisave pri opozorilnih sporočilih in plošči poročevalnega pogleda Font color for error messages in Report view panel - Font color for error messages in Report view panel + Barva pisave pri sporočilih o napakah in plošči poročevalnega pogleda Internal Python output will be redirected @@ -2254,8 +2262,8 @@ from Python console to Report view panel Internal Python error messages will be redirected from Python console to Report view panel - Internal Python error messages will be redirected -from Python console to Report view panel + Notranja Pythonova sporočila o napakah bodo preusmerjena +s Pythonove konzole v ploščo poročevalnega pogleda Include a timecode for each report @@ -2267,11 +2275,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + Običajna sporočila bodo zabeležena Record normal messages - Record normal messages + Zabeleži običajna sporočila @@ -2410,16 +2418,16 @@ can be rendered directly by GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by GPU. + Če je izbrano, bodo uporabljeni medpomnilni predmeti oglišč (Vertex Buffer Objects - VBO). +VBO je zmožnost, ki nudi postopke nalaganja podatkov o ogliščih +(položaj, vektor normale, barva, itn.) na grafično kartico. +VBO-ji nudijo občutno izboljšanje učinkovitosti, saj se podatki +namesto v delovnem pomnilniku nahajajo v grafičnem pomnilniku, zaradi česar +je lahko izrisan neposredno z GPE. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support on the FreeCAD forums +Opomba: Ta zmožnost lahko pripelje do množice različnih težav, +od gafičnih nepravilnosti do hroščev sesipanja GPE. Ne pozabite javiti, +da je bila ta zmožnost omogočena, ko boste iskali podporo na FreeCAD-ovih forumih Use OpenGL VBO (Vertex Buffer Object) @@ -2515,7 +2523,7 @@ bounding box size of the 3D object that is currently displayed. Objects will appear in a perspective projection - Objects will appear in a perspective projection + Predmeti bodo prikazani v perspektivni preslikavi Axis cross will be shown by default at file @@ -3135,11 +3143,11 @@ You can also use the form: John Doe <john@doe.com> Framebuffer (custom) - Framebuffer (custom) + Slikovni medpomnilnik (po meri) Framebuffer (as is) - Framebuffer (as is) + Slikovni medpomnilnik (kakršen je) Pixel buffer @@ -3206,16 +3214,44 @@ You can also use the form: John Doe <john@doe.com> Recorded macros will also contain user interface commands - Recorded macros will also contain user interface commands + Posneti makri bodo vsebovali tudi ukaze uporabniškega vmesnika Recorded macros will also contain user interface commands as comments - Recorded macros will also contain user interface commands as comments + Posneti makri bodo kot opombe vsebovali tudi ukaze uporabniškega vmesnika The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3266,8 +3302,8 @@ You can also use the form: John Doe <john@doe.com> List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - List the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + Naštej nastavitve miškinih tipk za vsako izbrano nastavitev krmarjenja. +Izberite nastavitev in nato pritisnite tipko za pregled navedenih nastavitev. Mouse... @@ -3285,9 +3321,9 @@ Select a set and then press the button to view said configurations.Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis. - Rotation orbit style. -Trackball: moving the mouse horizontally will rotate the part around the y-axis -Turntable: the part will be rotated around the z-axis. + Slog sukanja krogle. +Vrtilna krogla: z vodoravnim premikanjem miške se bo del sukal okoli osi y +Sukajoči pogled: del se bo sukal okrog osi y. Turntable @@ -3304,8 +3340,8 @@ Turntable: the part will be rotated around the z-axis. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - Sets camera zoom for new documents. -The value is the diameter of the sphere to fit on the screen. + Nastavi vidno polje kamere za nove dokumente. +Vrednost predstavlja premer krogle, včrtane v zaslon. mm @@ -3359,11 +3395,11 @@ Mouse tilting is not disabled by this setting. Rotations in 3D will use current cursor position as center for rotation - Rotations in 3D will use current cursor position as center for rotation + Pri prostorskem sukanju bo za vrtišče izbran trenutni položaj kazalke Rotate at cursor - Rotate at cursor + Sukaj pri kazalki Isometric @@ -3407,11 +3443,11 @@ Mouse tilting is not disabled by this setting. Default camera orientation - Default camera orientation + Privzeta usmeritev kamere Default camera orientation when creating a new document or selecting the home view - Default camera orientation when creating a new document or selecting the home view + Privzeta usmeritev kamere pri ustvarjanju novega dokumenta ali izbiri domačega pogleda @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -3529,11 +3569,11 @@ Mouse tilting is not disabled by this setting. Enable selection highlighting - Omogoči poudarjanje izbir + Omogoči poudarjanje izbora Enable preselection highlighting - Omogoči poudarjanje predizbir + Omogoči poudarjanje predizbora Background color @@ -3565,11 +3605,11 @@ Mouse tilting is not disabled by this setting. Enable preselection and highlight by specified color - Enable preselection and highlight by specified color + Omogoči predizbor in poudarjanje z določeno barvo Enable selection highlighting and use specified color - Enable selection highlighting and use specified color + Omogoči poudarjanje izbora in uporabi določeno barvo Area for picking elements in 3D view. @@ -3587,7 +3627,7 @@ Larger value eases to pick things, but can make small features impossible to sel Color gradient will get selected color as middle color - Color gradient will get selected color as middle color + Barvni preliv bo imel izbrano barvo kot sredinsko barvo Bottom color @@ -3595,7 +3635,7 @@ Larger value eases to pick things, but can make small features impossible to sel Background will have selected color gradient - Background will have selected color gradient + Ozadje bo imelo izbrani barvni preliv Top color @@ -3676,8 +3716,8 @@ To add a calculation press Return in the value input field Unit system to be used for the Quantity The preference system is the one set in the general preferences. - Unit system to be used for the Quantity -The preference system is the one set in the general preferences. + Merski sistem, ki se uporabi za količino +Prednostni je sistem, nastavljen v splošnih prednastavitvah. Decimals: @@ -3771,7 +3811,7 @@ The preference system is the one set in the general preferences. <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> - <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> + <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Opomba:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> spremembe bodo začele veljati ob naslednjem zagonu programa.</span></p></body></html> @@ -4009,7 +4049,7 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::MouseButtons Mouse buttons - Miškini gumbi + Miškine tipke Configuration @@ -4029,7 +4069,7 @@ The 'Status' column shows whether the document could be recovered. Zooming: - Bliže/dlje: + Preodmičenje: @@ -4060,7 +4100,7 @@ The 'Status' column shows whether the document could be recovered. Collapse - Strni + Zloži Existing sub-group @@ -4276,11 +4316,11 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::RemoteDebugger Attach to remote debugger - Attach to remote debugger + Priloži k oddaljenemu razhroščevalniku winpdb - winpdb + winpdb Password: @@ -4288,19 +4328,19 @@ The 'Status' column shows whether the document could be recovered. VS Code - VS Code + VS koda Address: - Address: + Naslov: Port: - Port: + Vrata: Redirect output - Redirect output + Preusmeri izhod @@ -4456,7 +4496,7 @@ The 'Status' column shows whether the document could be recovered. Gui::DockWnd::PropertyDockView Property View - Pogled lastnosti + Pogled z lastnostmi @@ -4495,27 +4535,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Prikaži vrste sporočil Normal messages - Normal messages + Običajna sporočila Log messages - Log messages + Dnevniška sporočila Warnings - Warnings + Opozorila Errors - Errors + Napake Show report view on - Show report view on + Prikaži poročevalni pogled pri @@ -4526,7 +4566,7 @@ The 'Status' column shows whether the document could be recovered. Python console - Konzola Python + Pythonova ukazna miza @@ -4680,6 +4720,20 @@ Ali želite shraniti spremembe? Datoteka PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -4740,15 +4794,15 @@ Ali želite shraniti spremembe? Gui::GestureNavigationStyle Tap OR click left mouse button. - Tapnite ali kliknite z levim miškinim gumbom. + Tapnite ali kliknite z levo miškino tipko. Drag screen with two fingers OR press right mouse button. - Povlecite po zaslonu z dvema prstoma ali kliknite z desnim miškinim gumbom. + Povlecite po zaslonu z dvema prstoma ali kliknite z desno miškino tipko. Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Povlecite po zaslonu z enim prstom ali kliknite z levim miškinim gumbom. V očrtovalniku in drugih načinih urejanja pridržite še tipko Alt. + Povlecite po zaslonu z enim prstom ali kliknite z levo miškinio tipko. V očrtovalniku in drugih načinih urejanja pridržite še tipko Alt. Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. @@ -4829,15 +4883,15 @@ Ali želite shraniti spremembe? Gui::InventorNavigationStyle Press CTRL and left mouse button - Pritisnite CTRL in levi miškin gumb + Pritisnite CTRL in levo miškino tipko Press middle mouse button - Pritisnite srednjmiškin gumb + Pritisnite srednjo miškino tipko Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Scroll middle mouse button @@ -5042,19 +5096,19 @@ Kako želite nadaljevati? Gui::MayaGestureNavigationStyle Tap OR click left mouse button. - Tapnite ali kliknite z levim miškinim gumbom. + Tapnite ali kliknite z levo miškino tipko. Drag screen with two fingers OR press ALT + middle mouse button. - Povlecite po zaslonu z dvema prstoma ali pritisnite Alt + srednji miškin gumb. + Povlecite po zaslonu z dvema prstoma ali pritisnite Alt + srednjo miškino tipko. Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Povlecite po zaslonu z enim prstom ali pritisnite Alt + levi miškin gumb. V očrtovalniku in drugih načinih urejanja pridržite še gumb Alt. + Povlecite po zaslonu z enim prstom ali pritisnite Alt + levo miškino tipko. V očrtovalniku in drugih načinih urejanja pridržite še gumb Alt. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard. - Uščipnite (na zaslonu dva prsta povlecite skupaj ali narazen), zavrtite miškino kolesce, pritisnite Alt + desni gumb miškin gumb ali na tipkovnici pritisnite Stran ↑/Stran ↓. + Uščipnite (na zaslonu dva prsta povlecite skupaj ali narazen), zavrtite miškino kolesce, pritisnite Alt + desno miškino tipko ali na tipkovnici pritisnite Stran ↑/Stran ↓. @@ -5068,19 +5122,19 @@ Kako želite nadaljevati? Gui::OpenCascadeNavigationStyle Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Press CTRL and middle mouse button - Pritisnite Ctrl in srednji gumb na miški + Pritisnite Ctrl in srednjo miškino tipko Press CTRL and right mouse button - Pritisnite Ctrl in desni gumb na miški + Pritisnite CTRL in levo miškino tipko Press CTRL and left mouse button - Pritisnite CTRL in levi miškin gumb + Pritisnite CTRL in levo miškino tipko @@ -5209,7 +5263,7 @@ Ali želite končati ne da bi shranili podatke? Python console - Konzola Python + Pythonova ukazna miza Unhandled PyCXX exception. @@ -5281,11 +5335,11 @@ Ali želite končati ne da bi shranili podatke? Save history - Save history + Shrani zgodovino Saves Python history across %1 sessions - Saves Python history across %1 sessions + Shrani %1 sej Pythonove zgodovine @@ -5314,19 +5368,34 @@ Ali želite končati ne da bi shranili podatke? Datoteke '%1' ni mogoče odpreti. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Datoteke ni mogoče najti + + + The file '%1' cannot be opened. + Datoteke '%1' ni mogoče odpreti. + + Gui::RevitNavigationStyle Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Press middle mouse button - Pritisnite srednjmiškin gumb + Pritisnite srednjo miškino tipko Press SHIFT and middle mouse button - Pritisnite Shift in srednji miškin gumb + Pritisnite Shift in srednjo miškino tipko Scroll middle mouse button @@ -5580,7 +5649,7 @@ Ali želite navesti drugo mapo? Gui::TouchpadNavigationStyle Press left mouse button - Pritisnite levi gumb na miški + Pritisnite levo miškino tipko Press SHIFT button @@ -5948,7 +6017,7 @@ Ali želite navesti drugo mapo? Preferences... - Nastavitve... + Prednastavitve ... Quit %1 @@ -6068,7 +6137,7 @@ Ali želite navesti drugo mapo? Property view - Pogled lastnosti + Pogled z lastnostmi Selection view @@ -6088,7 +6157,7 @@ Ali želite navesti drugo mapo? Python console - Konzola Python + Pythonova ukazna miza Display properties @@ -6537,11 +6606,11 @@ Please check the Report View for more details. Group with links - Group with links + Skupina s povezavami Group with transform links - Group with transform links + Skupina s povezavami preoblikovanja Create link group failed @@ -6565,11 +6634,11 @@ Please check the Report View for more details. Failed to import links - Failed to import links + Uvažanje povezav je spodletelo Failed to import all links - Failed to import all links + Uvažanje vseh povezav je spodletelo Invalid name @@ -6645,6 +6714,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Ali ste prepričani da želite nadaljevati? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -6893,11 +7006,11 @@ Choose 'Abort' to abort View turntable... - Pokaži vrtilno ploščo … + Pokaži sukajočo ploščo … View turntable - Pokaži vrtilno ploščo + Pokaži sukajočo ploščo @@ -6998,11 +7111,11 @@ Choose 'Abort' to abort &Preferences ... - &Možnosti … + &Prednastavitve … Opens a Dialog to edit the preferences - Odpre pogovorno okno za urejanje možnosti + Odpre pogovorno okno za urejanje prednastavitev @@ -7066,7 +7179,7 @@ Choose 'Abort' to abort Activates or Deactivates the selected object's edit mode - Omogoči ali onemogoči urejevalni način izbrani predmetov + Omogoči ali onemogoči urejevalni način izbranih predmetov @@ -7307,7 +7420,7 @@ Choose 'Abort' to abort Import links - Import links + Uvozi povezave Import selected external link(s) @@ -7322,7 +7435,7 @@ Choose 'Abort' to abort Import all links - Import all links + Uvozi vse povezave Import all links of the active document @@ -7412,11 +7525,11 @@ Choose 'Abort' to abort Select all links - Select all links + Izberi vse povezave Select all links to the current selected object - Select all links to the current selected object + Izberi vse povezave do trenutno izbranega predmeta @@ -7472,11 +7585,11 @@ Choose 'Abort' to abort Attach to remote debugger... - Attach to remote debugger... + Priloži k oddaljenemu razhroščevalniku ... Attach to a remotely running debugger - Attach to a remotely running debugger + Priloži k razhroščevalniku, ki se izvaja oddaljeno @@ -7851,6 +7964,21 @@ Choose 'Abort' to abort Seznam nedavnih datotek + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -8054,11 +8182,11 @@ Choose 'Abort' to abort &Send to Python Console - &Send to Python Console + &Pošlji na Pythonovo ukazno mizo Sends the selected object to the Python console - Sends the selected object to the Python console + Pošlje izbrane predmete na Pythonovo ukazno mizo @@ -8305,11 +8433,11 @@ Choose 'Abort' to abort Collapse selected item - Collapse selected item + Zloži izbrani predmet Collapse currently selected tree items - Collapse currently selected tree items + Zloži trenutno izbrane predmete drevesa @@ -8890,14 +9018,14 @@ Choose 'Abort' to abort TreeView - TreeView + DrevesniPogled StdTreeDrag TreeView - TreeView + DrevesniPogled Initiate dragging @@ -8916,7 +9044,7 @@ Choose 'Abort' to abort TreeView - TreeView + DrevesniPogled Multi document @@ -8927,7 +9055,7 @@ Choose 'Abort' to abort StdTreePreSelection TreeView - TreeView + DrevesniPogled Pre-selection @@ -8942,7 +9070,7 @@ Choose 'Abort' to abort StdTreeRecordSelection TreeView - TreeView + DrevesniPogled Record selection @@ -8957,7 +9085,7 @@ Choose 'Abort' to abort StdTreeSelection TreeView - TreeView + DrevesniPogled Go to selection @@ -8976,7 +9104,7 @@ Choose 'Abort' to abort TreeView - TreeView + DrevesniPogled Single document @@ -8987,7 +9115,7 @@ Choose 'Abort' to abort StdTreeSyncPlacement TreeView - TreeView + DrevesniPogled Sync placement @@ -9002,7 +9130,7 @@ Choose 'Abort' to abort StdTreeSyncSelection TreeView - TreeView + DrevesniPogled Sync selection @@ -9017,7 +9145,7 @@ Choose 'Abort' to abort StdTreeSyncView TreeView - TreeView + DrevesniPogled Sync view diff --git a/src/Gui/Language/FreeCAD_sr.qm b/src/Gui/Language/FreeCAD_sr.qm index 7c8b773ce0..02c540d60a 100644 Binary files a/src/Gui/Language/FreeCAD_sr.qm and b/src/Gui/Language/FreeCAD_sr.qm differ diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index ce08592255..ddf5ab017c 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Ван Домета + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Дугмићи - - Clear - Обриши - Print Reference Иcпиc Референце @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball Таcтери + + Reset + Поништи + Gui::Dialog::DlgDisplayProperties @@ -2101,10 +2109,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2117,6 +2121,10 @@ Specify another directory, please. Clear Обриши + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2266,11 +2274,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + Normalne poruke će se snimati Record normal messages - Record normal messages + Snimaj normalne poruke @@ -3215,6 +3223,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3515,6 +3551,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4496,27 +4536,27 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Prikaži tip poruke Normal messages - Normal messages + Normalne poruke Log messages - Log messages + Prijavite poruke Warnings - Warnings + Upozorenje Errors - Errors + Greške Show report view on - Show report view on + Prikaži prikaz izveštaja na @@ -4680,6 +4720,20 @@ Do you want to save your changes? PDF датотека + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5314,6 +5368,21 @@ Do you want to exit without saving your data? Датотека '%1' се не може отворити. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Датотека није нађена + + + The file '%1' cannot be opened. + Датотека '%1' се не може отворити. + + Gui::RevitNavigationStyle @@ -6645,6 +6714,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Sigurno želite da nastavite? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7851,6 +7964,21 @@ Choose 'Abort' to abort Листа недавних датотека + + StdCmdRecentMacros + + Macro + Макронаредба + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index 938b538668..126b73e5e3 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 42c260b626..ac6347bd18 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Utanför område + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Knappar - - Clear - Rensa - Print Reference Utskriftsreferens @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball knappar + + Reset + Återställ + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Ange en annan katalog. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Ange en annan katalog. Clear Rensa + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3216,6 +3224,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3516,6 +3552,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4680,6 +4720,20 @@ Vill du spara ändringarna? PDF-fil + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5314,6 +5368,21 @@ Vill du avsluta utan att spara din data? Filen '%1' kan inte öppnas. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Fil ej funnen + + + The file '%1' cannot be opened. + Filen '%1' kan inte öppnas. + + Gui::RevitNavigationStyle @@ -6645,6 +6714,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7851,6 +7964,21 @@ Choose 'Abort' to abort Lista över nyligen öppnade filer + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_tr.qm b/src/Gui/Language/FreeCAD_tr.qm index 648622d139..786de7a1f5 100644 Binary files a/src/Gui/Language/FreeCAD_tr.qm and b/src/Gui/Language/FreeCAD_tr.qm differ diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index b117b63f60..57da872b66 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Aralığın dışında + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Düğmeler - - Clear - Temizle - Print Reference Başvuruyu yazdır @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Uzaybol Hareketi + + Reset + Sıfırla + Gui::Dialog::DlgDisplayProperties @@ -2102,10 +2110,6 @@ Lütfen başka bir dizin belirtin. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2118,6 +2122,10 @@ Lütfen başka bir dizin belirtin. Clear Temizle + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3217,6 +3225,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3408,7 +3444,7 @@ Mouse tilting is not disabled by this setting. Default camera orientation - Default camera orientation + Varsayılan kamera yönü Default camera orientation when creating a new document or selecting the home view @@ -3517,6 +3553,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4682,6 +4722,20 @@ Do you want to save your changes? PDF dosyası + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5316,6 +5370,21 @@ Do you want to exit without saving your data? '%1' Dosyası açılamıyor. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Dosya bulunamadı + + + The file '%1' cannot be opened. + '%1' Dosyası açılamıyor. + + Gui::RevitNavigationStyle @@ -6642,6 +6711,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7848,6 +7961,21 @@ Choose 'Abort' to abort Son kullanılan dosya listesi + + StdCmdRecentMacros + + Macro + Makro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -9151,7 +9279,7 @@ Are you sure you want to continue? These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Bloklar seçildi ama etkin belge içinde değil. @@ -9344,7 +9472,7 @@ Do you still want to proceed? &Tools - &Eszközök + Araçlar &Macro diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index 448b3f78b2..eae63fdb12 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index f8e20e6dfe..5f654b08b8 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Поза межами припустимого діапазону + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Кнопки - - Clear - Очистити - Print Reference Друкувати посилання @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Кнопки 3D-миші Spaceball + + Reset + Скинути + Gui::Dialog::DlgDisplayProperties @@ -2100,10 +2108,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2116,6 +2120,10 @@ Specify another directory, please. Clear Очистити + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2265,11 +2273,11 @@ from Python console to Report view panel Normal messages will be recorded - Normal messages will be recorded + Нормальні повідомлення будуть записані Record normal messages - Record normal messages + Запис нормальних повідомлень @@ -3214,6 +3222,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3514,6 +3550,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4495,7 +4535,7 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Показати типи повідомлень Normal messages @@ -4503,19 +4543,19 @@ The 'Status' column shows whether the document could be recovered. Log messages - Log messages + Журнал повідомлень Warnings - Warnings + Застереження Errors - Errors + Помилки Show report view on - Show report view on + Показати вид звіт в @@ -4680,6 +4720,20 @@ Do you want to save your changes? PDF-файл + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5311,6 +5365,21 @@ Do you want to exit without saving your data? Файл '%1' не може бути відкритий. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Файл не знайдено + + + The file '%1' cannot be opened. + Файл '%1' не може бути відкритий. + + Gui::RevitNavigationStyle @@ -5640,7 +5709,7 @@ Do you want to specify another directory? Afrikaans - Африканська + Африкаанс Norwegian @@ -6640,6 +6709,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Ви впевнені, що бажаєте продовжити? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7846,6 +7959,21 @@ Choose 'Abort' to abort Список останніх файлів + + StdCmdRecentMacros + + Macro + Макрос + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_val-ES.qm b/src/Gui/Language/FreeCAD_val-ES.qm index 566cea82f3..521a3f825c 100644 Binary files a/src/Gui/Language/FreeCAD_val-ES.qm and b/src/Gui/Language/FreeCAD_val-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index 84bcfa83be..7d2a7bdda9 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Fora d'abast + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Botons - - Clear - Neteja - Print Reference Imprimeix les referències @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Botons del ratolí 3D + + Reset + Reinicialitza + Gui::Dialog::DlgDisplayProperties @@ -2097,10 +2105,6 @@ Specify another directory, please. Filter by type Filtra per tipus - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Si està activada, la selecció de la vista 3D es sincronitzarà amb la jerarquia d'objectes completa. - Sync sub-object selection Sincronitza la selecció dels subobjectes @@ -2113,6 +2117,10 @@ Specify another directory, please. Clear Neteja + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3203,6 +3211,34 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> The directory in which the application will search for macros El directori en què l’aplicació buscarà macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3501,6 +3537,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Sistema imperial d'unitats per a enginyeria civil (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4665,6 +4705,20 @@ Do you want to save your changes? Fitxer PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5295,6 +5349,21 @@ Do you want to exit without saving your data? El fitxer '%1' no es pot obrir. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + No s'ha trobat el fitxer. + + + The file '%1' cannot be opened. + El fitxer '%1' no es pot obrir. + + Gui::RevitNavigationStyle @@ -6616,6 +6685,50 @@ Trieu «Interromp» per a interrompre Override colors... Sobreescriu els colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7822,6 +7935,21 @@ Trieu «Interromp» per a interrompre Llista de fitxers recents + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_vi.qm b/src/Gui/Language/FreeCAD_vi.qm index 4e6a27e9ca..a099aad869 100644 Binary files a/src/Gui/Language/FreeCAD_vi.qm and b/src/Gui/Language/FreeCAD_vi.qm differ diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index 371031790a..b304bb50ff 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -432,6 +432,14 @@ while doing a left or right click and move the mouse up or down Out Of Range Ngoài phạm vi + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1059,10 +1067,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons Nút bấm - - Clear - Xóa - Print Reference In tham chiếu @@ -1071,6 +1075,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Nút Spaceball + + Reset + Đặt lại + Gui::Dialog::DlgDisplayProperties @@ -1282,11 +1290,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces Code lines will be numbered - Code lines will be numbered + Code lines will be numbered Pressing <Tab> will insert amount of defined indent size - Pressing <Tab> will insert amount of defined indent size + Si premeu <Tab> s'inserirà la quantitat de la mida del sagnat definit Tabulator raster (how many spaces) @@ -2103,10 +2111,6 @@ Hãy chọn mục khác. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2119,6 +2123,10 @@ Hãy chọn mục khác. Clear Xóa + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3217,6 +3225,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3517,6 +3553,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4683,6 +4723,20 @@ Bạn có muốn lưu các thay đổi của bạn? Tệp PDF + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5317,6 +5371,21 @@ Bạn có muốn thoát mà không lưu dữ liệu của mình không?Tập tin '%1' không thể mở được. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + Không tìm thấy tệp + + + The file '%1' cannot be opened. + Tập tin '%1' không thể mở được. + + Gui::RevitNavigationStyle @@ -6648,6 +6717,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7854,6 +7967,21 @@ Choose 'Abort' to abort Danh sách các tập tin mới dùng + + StdCmdRecentMacros + + Macro + Macro + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 11a3bcd6ee..bbb425fc17 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 7497aef13b..21ef8421ba 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -418,7 +418,7 @@ while doing a left or right click and move the mouse up or down Collection - Collection + 集合 @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range 超出范围 + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1019,7 +1027,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces %1 module not loaded - %1 module not loaded + %1 模块未加载 @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons 按钮 - - Clear - 清除 - Print Reference 打印参考 @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons 三维鼠标按键 + + Reset + 重设 + Gui::Dialog::DlgDisplayProperties @@ -1641,9 +1649,9 @@ Perhaps a file permission error? Note: your changes will be applied when you next switch workbenches - This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. + 这将引导您在自定义的全局工具栏中设置此宏。指示将以红色文本显示在对话框中。 -Note: your changes will be applied when you next switch workbenches +注意：当您下次切换工作台时，您的更改将被应用 @@ -2095,10 +2103,6 @@ Specify another directory, please. Filter by type 按类型筛选 - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2111,6 +2115,10 @@ Specify another directory, please. Clear 清除 + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -2194,8 +2202,7 @@ on-screen while displaying the error When a warning has occurred, the Report View dialog becomes visible on-screen while displaying the warning - When a warning has occurred, the Report View dialog becomes visible -on-screen while displaying the warning + 当警告发生时，当显示警告时，报告视图对话框会在屏幕上显示 Show report view on warning @@ -2231,11 +2238,11 @@ on-screen while displaying the log message Font color for warning messages in Report view panel - Font color for warning messages in Report view panel + 报告视图面板中警告信息的字体颜色 Font color for error messages in Report view panel - Font color for error messages in Report view panel + 报表视图面板错误消息的字体颜色 Internal Python output will be redirected @@ -2370,8 +2377,8 @@ from Python console to Report view panel Main coordinate system will always be shown in lower right corner within opened files - Main coordinate system will always be shown in -lower right corner within opened files + 主坐标系统将始终显示在打开文件的 +右下角 Time needed for last operation and resulting frame rate @@ -2475,7 +2482,7 @@ but slower response to any scene changes. Eye to eye distance for stereo modes - Eye to eye distance for stereo modes + 立体模式的双眼距离 Eye-to-eye distance used for stereo projections. @@ -2487,27 +2494,27 @@ bounding box size of the 3D object that is currently displayed. Backlight is enabled with the defined color - Backlight is enabled with the defined color + 已启用带有定义颜色的背光 Backlight color - Backlight color + 背光颜色 Intensity - Intensity + 强度 Intensity of the backlight - Intensity of the backlight + 背光强度 Objects will be projected in orthographic projection - Objects will be projected in orthographic projection + 对象将以正投影法投射。 Objects will appear in a perspective projection - Objects will appear in a perspective projection + 对象将以透视投影法显示 Axis cross will be shown by default at file @@ -3207,6 +3214,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3507,6 +3542,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4671,6 +4710,20 @@ Do you want to save your changes? PDF 文件 + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5302,6 +5355,21 @@ Do you want to exit without saving your data? 无法打开文件'%1'. + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + 文件未找到 + + + The file '%1' cannot be opened. + 无法打开文件'%1'. + + Gui::RevitNavigationStyle @@ -6556,7 +6624,7 @@ Please check the Report View for more details. Invalid name - Invalid name + 名称无效 The property name or group name must only contain alpha numericals, @@ -6628,6 +6696,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7834,6 +7946,21 @@ Choose 'Abort' to abort 最近文件列表 + + StdCmdRecentMacros + + Macro + 宏 + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo @@ -7902,7 +8029,7 @@ Choose 'Abort' to abort Save All - Save All + 全部保存 Save all opened document @@ -8112,7 +8239,7 @@ Choose 'Abort' to abort Add text document - Add text document + 添加文本文档 Add text document to active document @@ -8288,7 +8415,7 @@ Choose 'Abort' to abort Collapse selected item - Collapse selected item + 折叠所选项 Collapse currently selected tree items @@ -8303,7 +8430,7 @@ Choose 'Abort' to abort Expand selected item - Expand selected item + 展开所选项 Expand currently selected tree items @@ -8528,11 +8655,11 @@ Choose 'Abort' to abort Home - Home + 主页 Set to default home view - Set to default home view + 设置为默认主视图 diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index cd51bec33a..f9ef87bad8 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 2b094e1102..c8223e2511 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -431,6 +431,14 @@ while doing a left or right click and move the mouse up or down Out Of Range 超出範圍 + + " + " + + + " + " + Gui::Dialog::CameraDialog @@ -1058,10 +1066,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons 按鈕 - - Clear - 清除 - Print Reference 列印參考 @@ -1070,6 +1074,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Spaceball Buttons Spaceball按鈕 + + Reset + 重設 + Gui::Dialog::DlgDisplayProperties @@ -2094,10 +2102,6 @@ Specify another directory, please. Filter by type Filter by type - - If enabled, then 3D view selection will be sychronize with full object hierarchy. - If enabled, then 3D view selection will be sychronize with full object hierarchy. - Sync sub-object selection Sync sub-object selection @@ -2110,6 +2114,10 @@ Specify another directory, please. Clear 清除 + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + If enabled, then 3D view selection will be synchronized with full object hierarchy. + Gui::Dialog::DlgReportView @@ -3205,6 +3213,34 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros The directory in which the application will search for macros + + Recent macros menu + Recent macros menu + + + Size of recent macro list + Size of recent macro list + + + How many macros should be listed in recent macros list + How many macros should be listed in recent macros list + + + Shortcut count + Shortcut count + + + How many recent macros should have shortcuts + How many recent macros should have shortcuts + + + Keyboard Modifiers + Keyboard Modifiers + + + Keyboard modifiers, default = Ctrl+Shift+ + Keyboard modifiers, default = Ctrl+Shift+ + Gui::Dialog::DlgSettingsNavigation @@ -3505,6 +3541,10 @@ Mouse tilting is not disabled by this setting. Imperial for Civil Eng (ft, ft/sec) Imperial for Civil Eng (ft, ft/sec) + + FEM (mm, N, sec) + FEM (mm, N, sec) + Gui::Dialog::DlgSettingsViewColor @@ -4670,6 +4710,20 @@ Do you want to save your changes? PDF 檔 + + Gui::ExpressionLineEdit + + Exact match + Exact match + + + + Gui::ExpressionTextEdit + + Exact match + Exact match + + Gui::FileChooser @@ -5301,6 +5355,21 @@ Do you want to exit without saving your data? 無法打開'%1'檔案。 + + Gui::RecentMacrosAction + + Run macro %1 (Shift+click to edit) shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 + + + File not found + 找不到檔案 + + + The file '%1' cannot be opened. + 無法打開'%1'檔案。 + + Gui::RevitNavigationStyle @@ -6622,6 +6691,50 @@ Choose 'Abort' to abort Override colors... Override colors... + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + Are you sure you want to continue? + Are you sure you want to continue? + + + + +Please check report view for more... + + +Please check report view for more... + + + + +Pyhsical path: + + +Pyhsical path: + + + +Document: + +Document: + + + + Path: + + Path: + + + Identical physical path + Identical physical path + SelectionFilter @@ -7828,6 +7941,21 @@ Choose 'Abort' to abort 最近檔案清單 + + StdCmdRecentMacros + + Macro + 巨集 + + + Recent macros + Recent macros + + + Recent macro list + Recent macro list + + StdCmdRedo diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm index 9a7433b88e..6a313212e7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_af.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts index a881eb9f86..106792d142 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm index e0044cc3c4..d479bf8880 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts index a49341425f..f8d498037f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm index 609f4fed37..4639f1ebd2 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index c079ac4ee0..8b740d091b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localització de la instal·lació @@ -97,7 +97,7 @@ Banc de treball actualitzat. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. @@ -107,82 +107,82 @@ La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Manca el mòdul python - + Missing optional python module (doesn't prevent installing) Manca el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Si us plau, instal·leu primer els components que manquen. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament @@ -212,27 +212,27 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançat d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm index 4d2abeaa34..00b223e8cc 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index 133ba1e0b0..d1ff3b5b02 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umístění instalace @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Načítání popisu... - + Retrieving info from Načítání informací z - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. Toto rozšíření je již nainstalováno. - + Retrieving info from git Načítání informací z gitu - + Retrieving info from wiki Načítání informací z wiki - + GitPython not found. Using standard download instead. GitPython nenalezen. Použijte standardní způsob stažení. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Chybějící modul python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Chyba: Nelze stáhnout - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Je vyžadován restart - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm index be42783c45..19c21d43f7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index c3a629a9ad..feea5d535b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installationsort @@ -97,7 +97,7 @@ Die Liste der Arbeitsumgebungen wurde aktualisiert. - + Outdated GitPython detected, consider upgrading with pip. Es wurde eine veraltete GitPython-Version erkannt, erwäge das Upgrade mit Pip. @@ -107,82 +107,82 @@ Die Makro-Liste wurde erfolgreich abgerufen. - + Retrieving description... Beschreibung wird abgerufen... - + Retrieving info from Informationen werden abgerufen von - + An update is available for this addon. Für dieses Addon ist ein Update verfügbar. - + This addon is already installed. Dieses Addon ist bereits installiert. - + Retrieving info from git Informationen werden von Git abgerufen - + Retrieving info from wiki Informationen werden aus den Wiki abgerufen - + GitPython not found. Using standard download instead. GitPython wurde nicht gefunden. Stattdessen wird der Standarddownload verwendet. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ihre Version von Python scheint ZIP-Dateien nicht zu unterstützen. Aktion kann nicht fortgesetzt werden. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich installiert. Bitte starten Sie FreeCAD neu, um die Änderungen anzuwenden. - + Missing workbench Fehlender Arbeitsbereich - + Missing python module Fehlendes Python-Modul - + Missing optional python module (doesn't prevent installing) Fehlendes optionales Python-Modul (verhindert nicht die Installation) - + Some errors were found that prevent to install this workbench Es wurden einige Fehler gefunden, die die Installation dieses Arbeitsbereiches verhindern - + Please install the missing components first. Bitte installieren Sie zuerst die fehlenden Komponenten. - + Error: Unable to download Fehler: Download nicht möglich - + Successfully installed Installation erfolgreich @@ -212,27 +212,27 @@ Neustart erforderlich - + This macro is already installed. Dieses Makro ist bereits installiert. - + A macro has been installed and is available under Macro -> Macros menu Ein Makro wurde installiert und ist verfügbar unter Makro -> Makros-Menü - + This addon is marked as obsolete Dieses Add-on ist als veraltet markiert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dies bedeutet normalerweise, dass es nicht mehr gewartet wird, und einige erweiterte Add-on in dieser Liste die gleiche Funktionalität bieten. - + Error: Unable to locate zip from Fehler: Zip-Datei kann nicht gefunden werden von @@ -242,30 +242,35 @@ Ein Fehler ist bei der Git-Makro Abfrage aufgetreten, möglicherweise befindet sich die ausführbare Git-Datei nicht in dem Pfad - + This addon is marked as Python 2 Only Dieses Addon ist als nur für Python 2 gekennzeichnet - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Diese Workbench wird möglicherweise nicht mehr gewartet und die Installation auf einem Python-3-System wird höchstwahrscheinlich zu Fehlern beim Start oder während der Nutzung führen. - + User requested updating a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Aktualisierung einer Python-2-Workbench auf einem System mit Python 3 angefordert - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich aktualisiert. Bitte starten Sie FreeCAD neu, um die Änderungen zu übernehmen. - + User requested installing a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Installation einer Python-2-Workbench auf einem System mit Python 3 angefordert - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Anscheinend ist ein Problem beim Verbinden mit dem Wiki aufgetreten, daher kann die Wiki-Makroliste zu diesem Zeitpunkt nicht abgerufen werden + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm index 4945f92361..4bef3dede9 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index 8ccaf78eec..5dd594b5a4 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Σφάλμα: Δεν είναι δυνατή η λήψη - + Successfully installed Επιτυχής εγκατάσταση @@ -212,27 +212,27 @@ Απαιτείται επανεκκίνηση - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm index 3f913cac98..290256188d 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index 21ff055393..2dc62c7d82 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicación de la instalación @@ -97,7 +97,7 @@ Lista de entornos de trabajo actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considere actualizar con pip. @@ -107,82 +107,82 @@ La lista de macros fue recuperada con éxito. - + Retrieving description... Recuperando la descripción... - + Retrieving info from Recuperando información de - + An update is available for this addon. Una actualización está disponible para este complemento. - + This addon is already installed. Este complemento ya está instalado. - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de wiki - + GitPython not found. Using standard download instead. GitPython no encontrado. Utilizando descarga estándar en su lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Su versión de python no parece ser compatible con archivos ZIP. No es posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El entorno de trabajo se ha instalado correctamente. Reinicie FreeCAD para aplicar los cambios. - + Missing workbench Falta el entorno de trabajo - + Missing python module Falta módulo python - + Missing optional python module (doesn't prevent installing) Falta módulo opcional de python (no impide la instalación) - + Some errors were found that prevent to install this workbench Se han encontrado algunos errores que impiden instalar este entorno de trabajo - + Please install the missing components first. Por favor, instale los componentes que faltan primero. - + Error: Unable to download Error: No se puede descargar - + Successfully installed Se ha instalado correctamente @@ -212,27 +212,27 @@ Es necesario reiniciar - + This macro is already installed. Esta macro ya está instalada. - + A macro has been installed and is available under Macro -> Macros menu Una macro ha sido instalada y está disponible en el menú Macro -> Macros - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto generalmente significa que ya no está mantenido, y algún complemento más avanzado en esta lista proporciona la misma funcionalidad. - + Error: Unable to locate zip from Error: No se puede localizar zip desde @@ -242,30 +242,35 @@ Algo salió mal con la recuperación de instrucciones de Git, posiblemente el ejecutable de Git no está en la ruta - + This addon is marked as Python 2 Only Este complemento está marcado solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de trabajo ya no se mantiene, instalarlo en un sistema con Python 3 probablemente provocará errores al ejecutarse o utilizarse. - + User requested updating a Python 2 workbench on a system running Python 3 - El usuario solicita actualizar un banco de trabajo con Python 2 en un sistema que ejecuta Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Banco de trabajo actualizado con éxito. Reinicie FreeCAD para aplicar los cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - El usuario solicita instalar un banco de trabajo Python 2 en un sistema que ejecuta Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm index 48f2aa32dc..32a3424eab 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index f6a7c5eb4e..3dcef07328 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Instalatutako kokapena @@ -97,7 +97,7 @@ Lan-mahaien zerrenda eguneratu da. - + Outdated GitPython detected, consider upgrading with pip. GitPython zaharkitua detektatu da, eguneratu ezazu pip bidez. @@ -107,82 +107,82 @@ Makroen zerrenda ongi atzitu da. - + Retrieving description... Deskribapena atzitzen... - + Retrieving info from Informazioa berreskuratzen hemendik - + An update is available for this addon. Eguneraketa bat eskuragarri dago gehigarri honetarako. - + This addon is already installed. Gehigarri hau instalatuta dago. - + Retrieving info from git Informazioa atzitzen git biltegitik - + Retrieving info from wiki Informazioa atzitzen wikitik - + GitPython not found. Using standard download instead. GitPython ez da aurkitu. Deskarga estandarra erabiltzen. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Badirudi zure Python bertsioak ez duela ZIP fitxategirik onartzen. Ezin da jarraitu. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Lan-mahaia ongi instalatu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + Missing workbench Lan-mahaia falta da - + Missing python module Python modulua falta da - + Missing optional python module (doesn't prevent installing) Aukerako Python modulua falta da (ez du instalazioa eragozten) - + Some errors were found that prevent to install this workbench Lan-mahai hau instalatzea eragozten duten zenbait errore aurkitu dira - + Please install the missing components first. Instalatu falta diren osagaiak. - + Error: Unable to download Errorea: Ezin da deskargatu - + Successfully installed Ongi instalatu da @@ -212,27 +212,27 @@ Berrabiaraztea beharrezkoa da - + This macro is already installed. Makro hau instalatuta dago. - + A macro has been installed and is available under Macro -> Macros menu Makro bat instalatu da eta 'Makroa -> Makroak' menuan erabilgarri dago - + This addon is marked as obsolete Gehigarri hau zaharkituta dago - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Horrek esan nahi du ez dela mantentzen eta zerrenda honetako gehigarri aurreratuagoren batek funtzionaltasun bera eskaintzen duela. - + Error: Unable to locate zip from Errorea: Ezin izan da ZIP fitxategia aurkitu @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm index 5f9ac175f4..3f576b6878 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index c5ef57f524..a97a34c35f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm index 32f9686c67..c3a849b67f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts index 443d233e86..52b311bed6 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm index f9a2bbe9e7..16710227b9 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index f123755511..686b144083 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Emplacement installé @@ -97,7 +97,7 @@ La liste des ateliers a été mise à jour. - + Outdated GitPython detected, consider upgrading with pip. La version de GitPython est obsolète, envisagez de mettre à jour avec pip. @@ -107,82 +107,82 @@ Liste des macros récupérée avec succès. - + Retrieving description... Récupération de la description... - + Retrieving info from Récupération des informations de - + An update is available for this addon. Une mise à jour est disponible pour ce greffon. - + This addon is already installed. Ce greffon est déjà installé. - + Retrieving info from git Récupération des informations depuis git - + Retrieving info from wiki Récupération des informations depuis le wiki - + GitPython not found. Using standard download instead. GitPython est introuvable. Utilisation du téléchargement standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Votre version de Python semble ne pas supporter les fichiers ZIP. Impossible de continuer. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Atelier installé avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + Missing workbench Atelier manquant - + Missing python module Module Python manquant - + Missing optional python module (doesn't prevent installing) Un module Python optionnel est manquant (mais n'empêche pas l'installation) - + Some errors were found that prevent to install this workbench Des erreurs sont survenues et empêchent l'installation de cet atelier - + Please install the missing components first. Veuillez d'abord installer les composants manquants. - + Error: Unable to download Erreur : impossible de télécharger - + Successfully installed Installation réussie @@ -212,27 +212,27 @@ Redémarrage requis - + This macro is already installed. Cette macro est déjà installée. - + A macro has been installed and is available under Macro -> Macros menu Une macro a été installée et est disponible dans le menu Macro -> Macros - + This addon is marked as obsolete Ce greffon est marqué comme obsolète - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Cela signifie généralement qu'il n'est plus maintenu, et que d'autres greffons plus perfectionnés proposant les mêmes fonctionnalités sont disponibles. - + Error: Unable to locate zip from Erreur: Impossible de localiser le zip de @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm index 0235b67902..9f31419288 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index e9fbc0aeb4..b4f1b60122 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ A lista de bancos de traballo foi actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considera actualizar con pip. @@ -107,82 +107,82 @@ Lista de macros recuperada con éxito. - + Retrieving description... Recuperando descrición... - + Retrieving info from Recuperando información dende - + An update is available for this addon. Unha actualización está dispoñible para este engadido. - + This addon is already installed. Este engadido xa está instalado. - + Retrieving info from git Recuperando información dende git - + Retrieving info from wiki Recuperando información dende wiki - + GitPython not found. Using standard download instead. GitPython non atopado. Utilizando descarga estándard no seu lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A túa versión de python non parece ser compatible con ficheiros ZIP. Non é posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. O banco de traballo instalado correctamente. Fai o favor de reiniciar FreeCAD para aplicar os trocos. - + Missing workbench Perdido banco de traballo - + Missing python module Perdido módulo python - + Missing optional python module (doesn't prevent installing) Módulo python opcional perdido (non impide a instalación) - + Some errors were found that prevent to install this workbench Algúns erros atopados que impiden instalar este banco de traballo - + Please install the missing components first. Fai o favor de instalar os compoñentes que falta primeiro. - + Error: Unable to download Erro: A descarga non vai - + Successfully installed Instalado con éxito @@ -212,27 +212,27 @@ Require reinicio - + This macro is already installed. Esta macro xa está instalada. - + A macro has been installed and is available under Macro -> Macros menu Unha macro foi instalada e está dispoñible baixo o menú Macros Macro -> - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm index feaf5a71e4..3ff3cb5fd0 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index 1941425a86..273cea21e8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mjesto instaliranja @@ -97,7 +97,7 @@ Popis radnih površina je ažuriran. - + Outdated GitPython detected, consider upgrading with pip. Otkriven je zastarjeli GitPython, razmislite o nadogradnji s pip. @@ -107,82 +107,82 @@ Popis makronaredbi uspješno je dohvaćen. - + Retrieving description... Dohvaćanje opisa... - + Retrieving info from Dohvaćanje informacije od - + An update is available for this addon. Dostupno ažuriranje za ovaj dodatak. - + This addon is already installed. Ovaj dodatak je već instaliran. - + Retrieving info from git Dohvaćanje informacije od git - + Retrieving info from wiki Dohvaćanje informacije od wiki - + GitPython not found. Using standard download instead. GitPython nije pronađen. Upotreba standardnog preuzimanja. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaša verzija python-a ne podržava ZIP datoteke. Nije moguće nastaviti. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Radna površina je uspješno instalirana. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + Missing workbench Nedostaje radna površina - + Missing python module Nedostaje python modul - + Missing optional python module (doesn't prevent installing) Nedostaje opcionalni python modul (neće se spriječiti instalacija) - + Some errors were found that prevent to install this workbench Pronađene su neke pogreške koje sprečavaju instalaciju ove radne površine - + Please install the missing components first. Prvo instalirajte nedostajuće komponente. - + Error: Unable to download Greška: Ne mogu preuzeti - + Successfully installed Uspješno instaliran @@ -212,59 +212,70 @@ Potrebno je ponovo pokretanje - + This macro is already installed. Ova makronaredba je već instalirana. - + A macro has been installed and is available under Macro -> Macros menu Makronaredba je instalirana i dostupna je pod Makro -> Makros-Izborniku - + This addon is marked as obsolete Ovaj dodatak je označen kao zastario - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obično znači da se više ne održava, a neki napredniji dodatak na ovom popisu pruža istu funkciju. - + Error: Unable to locate zip from Pogreška: Nije moguće locirati zip od Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - - - - This addon is marked as Python 2 Only - This addon is marked as Python 2 Only + Nešto je pošlo po zlu s dohvaćanjem Git Macro-a, možda Git izvršni program nije u poveznici + This addon is marked as Python 2 Only + Taj je dodatak označen kao Python 2 Only + + + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. + Ova radna ploča se više ne može održavati i instaliranje na Python 3 sustav vjerojatno će rezultirati pogreškama pri pokretanju ili tijekom upotrebe. + + - + User requested updating a Python 2 workbench on a system running Python 3 - - User requested updating a Python 2 workbench on a system running Python 3 - + Korisnik je zatražio ažuriranje radne površine Python 2 na sustavu koji pokreće Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. - Workbench successfully updated. Please restart FreeCAD to apply the changes. + Workbench je uspješno ažuriran. Ponovo pokrenite FreeCAD da biste primijenili promjene. + + - + User requested installing a Python 2 workbench on a system running Python 3 - - User requested installing a Python 2 workbench on a system running Python 3 - + Korisnik je zatražio instaliranje radne stanice Python 2 na sustav koji radi s Python 3 - + + + + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time @@ -386,19 +397,19 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Addon Manager - Addon Manager + Upravitelj dodataka Close the Addon Manager - Close the Addon Manager + Zatvori Upravitelja dodataka You can use this window to specify additional addon repositories to be scanned for available addons - You can use this window to specify additional addon repositories -to be scanned for available addons + Možete koristiti ovaj prozor da biste odredili dodatna spremišta dodataka +kako bi se skenirali svi dostupni dodaci diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm index 9374c99ca1..1bb94ef397 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index e7757a86dc..0da6196d5e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ A munkafelületek listája frissítve. - + Outdated GitPython detected, consider upgrading with pip. Elavult GitPython észlelve, fontolja meg a frissítés a pip-el. @@ -107,82 +107,82 @@ A sikeresen beolvasott makrók listája. - + Retrieving description... Leírások lekérdezése... - + Retrieving info from Információ beolvasása ettől - + An update is available for this addon. Ehhez a kiegészítőhöz egy frissítés érhető el. - + This addon is already installed. Ez a kiegészítő már telepítve van. - + Retrieving info from git Információ beolvasása git-ből - + Retrieving info from wiki Információ beolvasása wiki-ből - + GitPython not found. Using standard download instead. GitPython nem található. Szokásos letöltési hely használata. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A Python verziója úgy tűnik, nem támogatja a zip fájlokat. Nem folytatható. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Munkafelület sikeresen telepítve. A változtatások alkalmazásához indítsa újra a FreeCAD programot. - + Missing workbench Hiányzó munkafelület - + Missing python module Hiányzó python modul - + Missing optional python module (doesn't prevent installing) Hiányzó kiegészítő python modul (nem állítja meg a telepítése) - + Some errors were found that prevent to install this workbench Néhány hibát talált, amely megakadályozza, hogy telepítse ezt a munkafelületet - + Please install the missing components first. Kérem először telepítse a hiányzó összetevőket. - + Error: Unable to download Hiba: Nem lehet letölteni - + Successfully installed Sikeresen telepítve @@ -212,27 +212,27 @@ Újraindítás szükséges - + This macro is already installed. Ez a makró már telepítve van. - + A macro has been installed and is available under Macro -> Macros menu A makró telepítve van, és elérhető a Makró -> Makrók menüben - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm index 3e6c045f01..3627e91f33 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index 35c170b331..e72a116350 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Lokasi pemasangan @@ -97,7 +97,7 @@ Daftar meja kerja sudah diperbarui. - + Outdated GitPython detected, consider upgrading with pip. GitPython yang kedaluwarsa terdeteksi, pertimbangkan untuk meningkatkan dengan pip. @@ -107,82 +107,82 @@ Daftar makro berhasil diambil. - + Retrieving description... Mengambil deskripsi... - + Retrieving info from Mengambil info dari - + An update is available for this addon. Pembaruan tersedia untuk addon ini. - + This addon is already installed. Addon ini sudah diinstal. - + Retrieving info from git Mengambil info dari git - + Retrieving info from wiki Mengambil info dari wiki - + GitPython not found. Using standard download instead. GitPython tidak ditemukan. Sebaliknya, gunakan unduhan standar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versi python Anda tampaknya tidak mendukung file ZIP. Tidak dapat melanjutkan. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Meja kerja berhasil diinstal. Silakan mulai kembali FreeCAD untuk menerapkan perubahan. - + Missing workbench Meja kerja tidak ada - + Missing python module Modul python tidak ada - + Missing optional python module (doesn't prevent installing) Modul python opsional tidak ada (tidak mencegah penginstalan) - + Some errors were found that prevent to install this workbench Beberapa kesalahan ditemukan yang mencegah untuk menginstal meja kerja ini - + Please install the missing components first. Silakan instal komponen yang hilang terlebih dahulu. - + Error: Unable to download Kesalahan: Tidak dapat mengunduh - + Successfully installed Berhasil diinstal @@ -212,27 +212,27 @@ Mulai ulang diperlukan - + This macro is already installed. Makro ini sudah diinstal. - + A macro has been installed and is available under Macro -> Macros menu Sebuah makro sudah diinstal dan tersedia di bawah menu Makro -> Makro - + This addon is marked as obsolete Addon ini ditandai sebagai usang - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Addon ini biasanya tidak lagi dipertahankan dan beberapa addon lebih canggih di daftar ini menyediakan fungsionalitas yang sama. - + Error: Unable to locate zip from Kesalahan: Tidak dapat menemukan zip dari @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm index d5d7d05cef..7676c8c8e2 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 53c80176e8..d559868b14 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Percorso di installazione @@ -97,7 +97,7 @@ Elenco degli ambienti di lavoro aggiornato. - + Outdated GitPython detected, consider upgrading with pip. Rilevato GitPython obsoleto, considerare di aggiornarlo con pip. @@ -107,82 +107,82 @@ Lista delle macro recuperata con successo. - + Retrieving description... Recupero descrizione... - + Retrieving info from Recupero informazioni da - + An update is available for this addon. Per questo addon è disponibile un aggiornamento. - + This addon is already installed. Questo addon è già installato. - + Retrieving info from git Recupero informazioni da git - + Retrieving info from wiki Recupero informazioni dal wiki - + GitPython not found. Using standard download instead. GitPython non trovato. In sostituzione, usare il download standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sembra che la versione di python non supporti i file ZIP. Impossibile procedere. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambiente di lavoro installato correttamente. Riavviare FreeCAD per applicare le modifiche. - + Missing workbench Ambiente di lavoro mancante - + Missing python module Modulo python mancante - + Missing optional python module (doesn't prevent installing) Modulo Python opzionale mancante (ma non impedisce l'installazione) - + Some errors were found that prevent to install this workbench Sono stati trovati alcuni errori che impediscono di installare questo ambiente di lavoro - + Please install the missing components first. Si prega di installare prima i componenti mancanti. - + Error: Unable to download Errore: download impossibile - + Successfully installed Installazione riuscita @@ -212,27 +212,27 @@ Riavvio richiesto - + This macro is already installed. Questa macro è già installata. - + A macro has been installed and is available under Macro -> Macros menu Una macro è stata installata ed è disponibile sotto Macro -> menu Macros - + This addon is marked as obsolete Questo addon è contrassegnato come obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Questo di solito significa che non è più mantenuto e alcuni addon in questa lista forniscono la stessa funzionalità. - + Error: Unable to locate zip from Errore: Impossibile individuare zip da @@ -242,30 +242,35 @@ Qualcosa è andato storto con il recupero della macro da Git, forse l'eseguibile Git non è nel percorso - + This addon is marked as Python 2 Only Questo componente aggiuntivo è contrassegnato come solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Questo ambiente potrebbe non essere più mantenuto e installarlo su un sistema Python 3 causerà probabilmente errori all'avvio o durante l'uso. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'aggiornamento di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambiente di lavoro aggiornato correttamente. Riavviare FreeCAD per applicare le modifiche. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'installazione di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog @@ -398,7 +403,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili You can use this window to specify additional addon repositories to be scanned for available addons È possibile utilizzare questa finestra per specificare ulteriori repository di addon -da scansionare per gli addons disponibili +da scansionare per gli addon disponibili diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm index 35f96907e3..15e9f8941d 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index c287361e60..858b5481c9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location インストール場所 @@ -97,7 +97,7 @@ ワークベンチの一覧を更新しました。 - + Outdated GitPython detected, consider upgrading with pip. 古い GitPython が見つかりました。pip によるアップグレードを検討してください。 @@ -107,82 +107,82 @@ マクロの一覧を取り込むことに成功しました。 - + Retrieving description... 説明の取り込み中 - + Retrieving info from 情報を取り込み中 - + An update is available for this addon. このアドオンでアップデートが利用可能です。 - + This addon is already installed. このアドオンは既にインストールされています。 - + Retrieving info from git Gitからの情報を取り込み中 - + Retrieving info from wiki Wikiからの情報を取り込み中 - + GitPython not found. Using standard download instead. GitPythonが見つかりません。代わりに標準のダウンロードを使用しています。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 利用しているPythonのバージョンではZIPファイルをサポートしていないようです。ゆえに続行できません。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. ワークベンチのインストールが成功しました。 FreeCADを再起動して変更を有効にしてください。 - + Missing workbench ワークベンチが見当たりません - + Missing python module Pythonが見当たりません - + Missing optional python module (doesn't prevent installing) オプションのPythonモジュールが見つかりません(インストールは停止されません) - + Some errors were found that prevent to install this workbench エラーが発生したためこのワークベンチをインストールすることができません - + Please install the missing components first. 先ずは、見当たらないコンポーネントをインストールしてください。 - + Error: Unable to download エラー: ダウンロードできませんでした - + Successfully installed インストールに成功しました。 @@ -212,27 +212,27 @@ 再起動が必要です - + This macro is already installed. このマクロは既にインストールされています。 - + A macro has been installed and is available under Macro -> Macros menu マクロがインストールされました。メニューのマクロ -> マクロから利用できます。 - + This addon is marked as obsolete このアドオンは非推奨に設定されています - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 通常はすでにメンテナンスがされていないことを意味します。このリストにあるさらに高度なアドオンが同じ機能を提供している場合があります。 - + Error: Unable to locate zip from エラー: ZIP ファイルを以下から配置できません。 @@ -242,30 +242,35 @@ Git マクロの取得に問題が発生しました。おそらく Git 実行ファイルがパス中にありません。 - + This addon is marked as Python 2 Only このアドオンは Python 2 専用として記されています - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. このワークベンチは保守されておらず、Python 3 システムにインストールすると起動時や使用中にエラーが発生する可能性が高くなります。 - + User requested updating a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチの更新を要求しました - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. ワークベンチの更新が成功しました。 FreeCADを再起動して変更を有効にしてください。 - + User requested installing a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチのインストールを要求しました - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm index a996817de9..bc40c4d78a 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts index ab8be1a09e..cd8ebcaedb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm index e0bd257d40..c51aeb9908 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts index a236954869..4dafa20fba 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ 작업대 목록이 갱신되었습니다. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. 이 추가기능을 업데이트 할 수 있습니다. - + This addon is already installed. 이 추가기능은 이미 설치되어 있습니다. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 설치완료.새로 추가한 작업대를 사용하려면 FreeCAD를 다시 시작하세요. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 오류: 내려받을 수 없음 - + Successfully installed 설치 완료 @@ -212,27 +212,27 @@ 다시 시작 필요 - + This macro is already installed. 이 매크로는 이미 설치되어 있습니다. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm index 0cc4f78ebb..cb47a335af 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts index 245f341b8a..a8f727f99e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm index b5db627d40..8892e41958 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index fb0ef8235a..2b701bfb4e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Geïnstalleerde locatie @@ -97,7 +97,7 @@ Werkbankenlijst is bijgewerkt. - + Outdated GitPython detected, consider upgrading with pip. Verouderde GitPython gevonden, overweeg een upgrade met pip. @@ -107,82 +107,82 @@ Lijst van macro's succesvol opgehaald. - + Retrieving description... Omschrijving ophalen... - + Retrieving info from Informatie ophalen van - + An update is available for this addon. Er is een update beschikbaar voor deze addon. - + This addon is already installed. Deze addon is al geïnstalleerd. - + Retrieving info from git Informatie ophalen van git - + Retrieving info from wiki Informatie ophalen van wiki - + GitPython not found. Using standard download instead. GitPython niet gevonden. Standaard download wordt nu gebruikt. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Je versie van Python lijkt geen ZIP-bestanden te ondersteunen. Verder gaan niet mogelijk. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Werkbank succesvol geïnstalleerd. Herstart FreeCAD om de wijzigingen toe te passen. - + Missing workbench Werkbank ontbreekt - + Missing python module Ontbrekende python module - + Missing optional python module (doesn't prevent installing) Ontbrekende optionele python module (voorkomt niet het installeren) - + Some errors were found that prevent to install this workbench Er zijn enkele fouten gevonden die voorkomen dat deze werkbank wordt geïnstalleerd - + Please install the missing components first. Installeer eerst de ontbrekende componenten. - + Error: Unable to download Fout: Kan niet downloaden - + Successfully installed Succesvol geïnstalleerd @@ -212,27 +212,27 @@ Opnieuw opstarten vereist - + This macro is already installed. Deze macro is al geïnstalleerd. - + A macro has been installed and is available under Macro -> Macros menu Een macro is geïnstalleerd en is beschikbaar onder Macro -> Macro' s menu - + This addon is marked as obsolete Deze uitbreiding is gemarkeerd als verouderd - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dit betekent gewoonlijk dat het niet meer onderhouden wordt, en een geavanceerdere uitbreidingen in deze lijst biedt dezelfde functionaliteit. - + Error: Unable to locate zip from Fout: Kan zip niet vinden vanuit @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm index a0fcaf49c6..a8801ad43f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_no.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts index 1287e4d6f7..a2e0c59141 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm index 3cd113bab8..4ac2688c2d 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 76f7e67255..6c857cc3ae 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Miejsce instalacji @@ -97,9 +97,9 @@ Lista Środowisk pracy została zaktualizowana. - + Outdated GitPython detected, consider upgrading with pip. - Outdated GitPython detected, consider upgrading with pip. + Wykryto przestarzały GitPython, rozważ aktualizację za pomocą programu pip. @@ -107,82 +107,82 @@ Pomyślnie pobrano listę makrodefinicji. - + Retrieving description... Pobieranie opisu... - + Retrieving info from Pobieranie informacji z - + An update is available for this addon. Aktualizacja jest dostępna dla tego dodatku. - + This addon is already installed. Ten dodatek jest już zainstalowany. - + Retrieving info from git Pobieranie informacji z git - + Retrieving info from wiki Pobieranie informacji z Wiki - + GitPython not found. Using standard download instead. - GitPython not found. Using standard download instead. + Nie znaleziono GitPython. Zamiast tego użyto standardowego pobierania. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Twoja wersja Pythona nie' obsługuje plików ZIP. Nie można kontynuować. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Środowisko pracy zainstalowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + Missing workbench Nieistniejące Środowisko pracy - + Missing python module Nieistniejący moduł Pyton - + Missing optional python module (doesn't prevent installing) - Missing optional python module (doesn't prevent installing) + Brakuje opcjonalnego modułu Python (nie przeszkadza w instalacji) - + Some errors were found that prevent to install this workbench Znaleziono pewne błędy, które uniemożliwiają zainstalowanie tego środowiska - + Please install the missing components first. Proszę najpierw zainstalować brakujące komponenty. - + Error: Unable to download Błąd: Nie można pobrać - + Successfully installed Zainstalowano pomyślnie @@ -194,7 +194,7 @@ Unable to clean macro code - Unable to clean macro code + Nie można usunąć kodu makrodefinicji @@ -212,60 +212,65 @@ Wymagany restart - + This macro is already installed. Moduł jest już zainstalowany. - + A macro has been installed and is available under Macro -> Macros menu - A macro has been installed and is available under Macro -> Macros menu - - - - This addon is marked as obsolete - This addon is marked as obsolete + Makro zostało zainstalowane i jest dostępne w menu Macro -> Macros menu - This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. + This addon is marked as obsolete + Ten dodatek jest oznaczony jako przestarzały - + + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. + Oznacza to, że zazwyczaj nie jest on już utrzymywany, a niektóre bardziej zaawansowane dodatki z tej listy zapewniają tę samą funkcjonalność. + + + Error: Unable to locate zip from - Error: Unable to locate zip from + Błąd: nie można znaleźć pliku Zip z Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - - - - This addon is marked as Python 2 Only - This addon is marked as Python 2 Only + Coś poszło nie tak z pobieraniem makr Git, prawdopodobnie plik wykonywalny Git nie występuje w podanej lokalizacjii - This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. + This addon is marked as Python 2 Only + Ten dodatek jest oznaczony tylko jako Python 2 - + + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. + Te środowisko pracy nie może być dłużej utrzymywane, a zainstalowanie go w systemie Python 3 z dużym prawdopodobieństwem doprowadzi do błędów podczas uruchamiania lub podczas użytkowania. + + + User requested updating a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zaktualizowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Środowisko pracy zaktualizowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + User requested installing a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zainstalowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog @@ -297,32 +302,32 @@ Executes the selected macro, if installed - Executes the selected macro, if installed + Rozpoczyna wykonywanie wybranego makra, jeśli jest zainstalowane Uninstalls a selected macro or workbench - Uninstalls a selected macro or workbench + Odinstalowuje wybrane makrodefinicje lub środowisko pracy Installs or updates the selected macro or workbench - Installs or updates the selected macro or workbench + Instaluje lub aktualizuje wybrane makrodefinicje lub środowisko pracy Download and apply all available updates - Download and apply all available updates + Pobierz i zainstaluj wszystkie dostępne aktualizacje Custom repositories (one per line): - Custom repositories (one per line): + Repozytoria użytkownika (jedno na linię): Sets configuration options for the Addon Manager - Sets configuration options for the Addon Manager + Ustawia opcje konfiguracji dla Menedżera dodatków @@ -397,8 +402,8 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji You can use this window to specify additional addon repositories to be scanned for available addons - You can use this window to specify additional addon repositories -to be scanned for available addons + Możesz użyć tego okna, aby określić dodatkowe repozytoria dodatków które +zostaną użyte w poszukiwaniu dostępnych dodatków diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm index 18acd1fea0..0dd824d684 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index bcb16445a5..3c9184cab0 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Lista de workbenches atualizada. - + Outdated GitPython detected, consider upgrading with pip. GitPython desatualizado detectado, considere atualizar com pip. @@ -107,82 +107,82 @@ Lista de macros obtida com sucesso. - + Retrieving description... Recuperando descrição... - + Retrieving info from Recuperando informações de - + An update is available for this addon. Uma atualização para esta extensão está disponível. - + This addon is already installed. Esta extensão já está instalada. - + Retrieving info from git Recuperando informações do git - + Retrieving info from wiki Recuperando informações da wiki - + GitPython not found. Using standard download instead. GitPython não encontrado. Usando o download padrão em vez disso. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sua versão do python parece não suportar arquivos ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada. Reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho não localizada - + Missing python module Modulo Python não localizado - + Missing optional python module (doesn't prevent installing) Faltando módulo python opcional (não impede a instalação) - + Some errors were found that prevent to install this workbench Foram encontrados alguns erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, primeiro instale os componentes faltantes. - + Error: Unable to download Erro: Não foi possível baixar - + Successfully installed Instalado com sucesso @@ -212,27 +212,27 @@ Reinicialização necessária - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macros - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm index 4bc1470c74..5d320d1b34 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index 916c3f2b74..d1aff2c648 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Caminho de instalação @@ -97,7 +97,7 @@ A lista de Bancadas de Trabalho foi atualizada. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ Lista de macros atualizada com sucesso. - + Retrieving description... Obtendo descrição... - + Retrieving info from Obtendo informações de - + An update is available for this addon. Uma atualização está disponível para esse extra. - + This addon is already installed. Este extra já está instalado. - + Retrieving info from git Obtendo informações do git - + Retrieving info from wiki Obtendo informações da wiki - + GitPython not found. Using standard download instead. GitPython não foi encontrado. Em vez disso, será usado o descarregamento padrão. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho em falta - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Foram encontrados erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, instale os componentes em falta primeiro. - + Error: Unable to download Erro: Não foi possível descarregar - + Successfully installed Instalado com sucesso @@ -212,27 +212,27 @@ Reinicio necessário - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macro -> Macros - + This addon is marked as obsolete Este extra está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isto geralmente significa que já não é mantido, e algum extra mais atualizado nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm index 4f712e0609..a3aac122af 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index 31a341628a..fea8f7bf81 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm index f9a1002ad8..7d58b9ddde 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index 36cb08553e..9293bf1e2b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место установки @@ -97,7 +97,7 @@ Список рабочих окружений обновлен. - + Outdated GitPython detected, consider upgrading with pip. Обнаружен устаревший GitPython, рассмотрите обновление с помощью pip. @@ -107,82 +107,82 @@ Список макросов успешно получен. - + Retrieving description... Получение описания... - + Retrieving info from Получение информации от - + An update is available for this addon. Для этого дополнения доступно обновление. - + This addon is already installed. Это дополнение уже установлено. - + Retrieving info from git Получение информации из git - + Retrieving info from wiki Получение информации из вики - + GitPython not found. Using standard download instead. GitPython не найден. Вместо этого используется стандартная загрузка. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. По-видимому, ваша версия python не поддерживает ZIP файлы. Продолжение невозможно. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Рабочее окружение успешно установлено. Пожалуйста, перезапустите FreeCAD для применения изменений. - + Missing workbench Отсутствует рабочее окружение - + Missing python module Отсутствует модуль python - + Missing optional python module (doesn't prevent installing) Отсутствует дополнительный модуль python (не запрещает установку) - + Some errors were found that prevent to install this workbench Найдены некоторые ошибки, которые мешают установке этого рабочего окружения - + Please install the missing components first. Сначала установите недостающие компоненты. - + Error: Unable to download Ошибка: Не удалось загрузить - + Successfully installed Успешно установлено @@ -212,27 +212,27 @@ Требуется перезапуск - + This macro is already installed. Этот макрос уже установлен. - + A macro has been installed and is available under Macro -> Macros menu Макрос установлен и доступен меню Макросы -> макрос - + This addon is marked as obsolete Это дополнение помечено как устаревшее - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Это обычно означает, что оно больше не поддерживается, и некоторые более продвинутые дополнения в этом списке обеспечивают те же функции. - + Error: Unable to locate zip from Ошибка: Не удается найти zip из @@ -242,30 +242,35 @@ Что-то пошло не так при запросе макроса с сайта Git. Возможно исполняемый файл Git не находится в нужном месте - + This addon is marked as Python 2 Only Это дополнение помечено Только для Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Этот верстак больше не может быть поддержан, и установка его на систему с Python 3, вероятно, вызовет ошибки при запуске или во время использования. - + User requested updating a Python 2 workbench on a system running Python 3 - Пользователь запросил обновление рабочего стола Python 2 на системе, запущенной с Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Верстак успешно обновлен. Перезапустите FreeCAD, чтобы применить изменения. - + User requested installing a Python 2 workbench on a system running Python 3 - Пользователь запросил установить верстак для Python 2 на системе Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm index ee6207f1fe..485583f35b 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts index c378f9ff95..8c94fbd98b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm index e04a6e9eed..fbdd9a4df5 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index 1a037547be..db658b7fa5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mesto namestitve @@ -97,7 +97,7 @@ Seznam delovnih okolij je bil posodobljen. - + Outdated GitPython detected, consider upgrading with pip. Zaznan je zastarel GitPython; razmislite o nadgraditivi s pip-om. @@ -107,82 +107,82 @@ Seznam makrov uspšno pridobljen. - + Retrieving description... Pridobivanje opisov ... - + Retrieving info from Pridobivanje podatkov iz - + An update is available for this addon. Posodobitev za ta dodatek je na voljo. - + This addon is already installed. Ta dodatek je že nameščen. - + Retrieving info from git Pridobivanje podatkov iz git-a - + Retrieving info from wiki Pridobivanje podatkov iz wiki strani - + GitPython not found. Using standard download instead. GitPython ni mogoče najti. Namesto tega je običajno prenašanje. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Kot kaže, vaša različica Pythona ne podpira datotek ZIP. Ni mogoče nadaljevati. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Delovno okolje uspešno nameščeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + Missing workbench Manjkajoče delovno oklje - + Missing python module Manjkajoči Pythonov modul - + Missing optional python module (doesn't prevent installing) Manjkajoči neobvezni Pythonov modul (ne ustavi namestitve) - + Some errors were found that prevent to install this workbench Najdene so bile določene napake, ki preprečujejo namestitev tega delovnega okolja - + Please install the missing components first. Namestite najprej manjkajoče sestavine. - + Error: Unable to download Napaka: Ni mogoče prenesti - + Successfully installed Uspešno nameščeno @@ -212,27 +212,27 @@ Potreben ponovni zagon - + This macro is already installed. Ta makro je že nameščen. - + A macro has been installed and is available under Macro -> Macros menu Makro je bil namščen in je dosegljiv preko menija Makro -> Makri - + This addon is marked as obsolete Ta dodatek je označen kot zastarel - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To ponavadi pomeni, da ni več vzdrževan in naprednejši dodatek s tega seznama nudi enake zmožnosti. - + Error: Unable to locate zip from Napaka: Ni mogoče najti zipa od @@ -242,30 +242,35 @@ Pri pridobivanju Git makra se je nekje zalomilo. Najverjetneje Git-ove izvršljive datoteke ni na tej poti - + This addon is marked as Python 2 Only Ta dodatek je označen, da je le za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. To delovno okolje lahko ni več vzdrževano in namestitev v Python 3 okolje bo najverjetneje prinesla napake pri zagonu ali med delovanjem. - + User requested updating a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil posodobitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Delovno okolje je uspešno posodobljeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil namestitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm index 680a15bf8d..131297ce2a 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index c15fc1a426..34d063f46e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm index 9aaf6df1c5..ce86290faf 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index 41c7ea915c..2879f26ff8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Arbetsytelista uppdaterades. - + Outdated GitPython detected, consider upgrading with pip. Utdaterad GitPython detekterad, överväg att uppgradera med pip. @@ -107,82 +107,82 @@ Makrolista hämtades. - + Retrieving description... Hämtar beskrivning... - + Retrieving info from Hämtar information från - + An update is available for this addon. En uppdatering är tillgänglig för detta tillägg. - + This addon is already installed. Det här tillägget är redan installerat. - + Retrieving info from git Hämtar information från git - + Retrieving info from wiki Hämtar information från wiki - + GitPython not found. Using standard download instead. GitPython hittades inte. Vanlig nedladdning används istället. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Din version av Python verkar inte stöda ZIP-filer. Kan inte fortsätta. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbetsytan installerades. Vänligen starta om FreeCAD för att den ska bli tillgänglig i programmet. - + Missing workbench Hittar inte arbetsyta - + Missing python module Hittar inte Python-modul - + Missing optional python module (doesn't prevent installing) Hittar inte frivillig Python-modul (förhindrar inte installation) - + Some errors were found that prevent to install this workbench Några fel hittades som förhindrar installationen av denna arbetsyta - + Please install the missing components first. Vänligen installera de saknade komponenterna först. - + Error: Unable to download Fel: Kan inte ladda ned - + Successfully installed Installationen lyckades @@ -212,27 +212,27 @@ Omstart krävs - + This macro is already installed. Det här makrot är redan installerat. - + A macro has been installed and is available under Macro -> Macros menu Ett makro har installerats och är tillgängligt under menyn Makro -> Makron... - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm index a5a0ba220b..ff83f14ac1 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index 95880cc3fb..8fa802cd67 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Çalışma Tezgahı listesi güncelleştirildi. - + Outdated GitPython detected, consider upgrading with pip. Geçmiş sürüme ait GitPython tespit edildi. Pip ile güncelleştirmeyi değerlendirin. @@ -107,82 +107,82 @@ Makroların listesi başarı ile alındı. - + Retrieving description... Tanım alınıyor... - + Retrieving info from Bilgi alınıyor - + An update is available for this addon. Bu eklenti için bir güncelleştirme mevcuttur. - + This addon is already installed. Bu eklenti halihazırda yüklüdür. - + Retrieving info from git Git'ten bilgi alınıyor - + Retrieving info from wiki Wiki'den bilgi alınıyor - + GitPython not found. Using standard download instead. GitPython bulunamadı. Standart yüklemeyi kullanmayı deneyin. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sizin Python versiyonunuz ZIP dosyalarını desteklemiyor olabilir. İşlem yapılamadı. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Çalışma Tezgahı başarı ile yüklendi. Değişikliklerin geçerli olması için lütfen FreeCAD'i yeniden başlatın. - + Missing workbench Eksik Çalışma Tezgahı - + Missing python module Eksik Python Modülü - + Missing optional python module (doesn't prevent installing) Eksik opsiyonel pyhton modülü (yüklemeye engel değil) - + Some errors were found that prevent to install this workbench Bu Çalışma Tezgahı'nın yüklenmesini engelleyen bazı hatalar bulundu - + Please install the missing components first. Lüften önce eksik bileşenleri yükleyin. - + Error: Unable to download Hata: İndirilemiyor - + Successfully installed Başarıyla Yüklendi @@ -212,27 +212,27 @@ Yeniden başlatma gerekli - + This macro is already installed. Bu makro zaten yüklü. - + A macro has been installed and is available under Macro -> Macros menu Bir makro yüklendi ve buna makro->makrolar menüsü altından ulaşılabilir - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm index dc27565908..94f0d9fa61 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index 349156dba0..246b80e3a5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Отримання опису... - + Retrieving info from Retrieving info from - + An update is available for this addon. Для цього додатка наявне оновлення. - + This addon is already installed. Цей додаток вже встановлений. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Відсутній модуль python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Помилка: завантаження неможливе - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm index 5d51bbe307..d8590a226b 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 7b9225daca..44c345e07d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicació instal·lada @@ -97,7 +97,7 @@ S'ha actualitzat la llista de bancs de treball. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. @@ -107,82 +107,82 @@ La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Falta el mòdul python - + Missing optional python module (doesn't prevent installing) Falta el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Instal·leu primer els components que falten. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament @@ -212,27 +212,27 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançats d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm index 51793f53c6..4b3efe4af1 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts index a68b4dcf83..995b4d9567 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Thiếu môđun python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Vui lòng cài đặt các thành phần còn thiếu trước đã. - + Error: Unable to download Lỗi: Không thể tải về - + Successfully installed Cài đặt thành công @@ -212,27 +212,27 @@ Yêu cầu khởi động máy - + This macro is already installed. Vĩ lệnh này đã được cài đặt. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm index f1a9d09cbc..316591319c 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index 21fd4e20cb..d94fa2a91d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安装位置 @@ -97,7 +97,7 @@ 工作台列表已更新。 - + Outdated GitPython detected, consider upgrading with pip. 检测到过时的 GitPython，建议您使用pip进行升级。 @@ -107,82 +107,82 @@ 成功获取了宏列表。 - + Retrieving description... 正在获取描述... - + Retrieving info from 获取信息 - + An update is available for this addon. 此插件可以更新。 - + This addon is already installed. 此插件已经被安装。 - + Retrieving info from git 从 git 获取信息 - + Retrieving info from wiki 从维基获取信息 - + GitPython not found. Using standard download instead. 找不到 GitPython。改用标准下载。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 您的 python 版本似乎不支持 ZIP 文件。无法继续。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 工作台安装成功。请重新启动 FreeCAD 以应用更改。 - + Missing workbench 缺少工作台 - + Missing python module 缺少 python 模块 - + Missing optional python module (doesn't prevent installing) 缺少可选的 python 模块 (没有阻止安装) - + Some errors were found that prevent to install this workbench 发现一些错误，无法安装这个工作台 - + Please install the missing components first. 请先安装丢失的组件。 - + Error: Unable to download 错误：无法下载 - + Successfully installed 成功安装了 @@ -212,27 +212,27 @@ 需要重启 - + This macro is already installed. 此宏已经安装。 - + A macro has been installed and is available under Macro -> Macros menu 宏已经安装，可以在宏 -> 宏菜单下使用 - + This addon is marked as obsolete 该插件被标记为已过时 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 这通常意味着不再维护它，并且此列表中的一些更高级的插件提供了相同的功能。 - + Error: Unable to locate zip from 错误：无法从中找到邮政编码 @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog @@ -386,19 +391,19 @@ installed addons will be checked for available updates Addon Manager - Addon Manager + 插件管理器 Close the Addon Manager - Close the Addon Manager + 关闭插件管理器 You can use this window to specify additional addon repositories to be scanned for available addons - You can use this window to specify additional addon repositories -to be scanned for available addons + 您可以使用此窗口指定其他插件仓库来 +扫描可用插件 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm index db51523576..e2fc3cef59 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index 5ffe714ba1..9917eb1173 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,7 +97,7 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. @@ -107,82 +107,82 @@ List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed @@ -212,27 +212,27 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from @@ -242,30 +242,35 @@ Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - + + + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time + Dialog diff --git a/src/Mod/Arch/Resources/translations/Arch_af.qm b/src/Mod/Arch/Resources/translations/Arch_af.qm index 6b1a7102c5..75b255c1bb 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_af.qm and b/src/Mod/Arch/Resources/translations/Arch_af.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_af.ts b/src/Mod/Arch/Resources/translations/Arch_af.ts index 09777d6959..6ed528dea9 100644 --- a/src/Mod/Arch/Resources/translations/Arch_af.ts +++ b/src/Mod/Arch/Resources/translations/Arch_af.ts @@ -29,7 +29,7 @@ Die nommerstyl - + The type of this building Die tipe van hierdie gebou @@ -114,7 +114,7 @@ Die berekende vloeroppervlak van hierdie vloer - + The placement of this object Die plasing van hierdie objek @@ -204,12 +204,12 @@ Die normale extrusie rigting van hierdie voorwerp (behou (0,0,0) vir outomatiese normaallyn) - + The linked object Die geskakelde objek - + The line width of the rendered objects Die lyn breedte van die ingeklede voorwerpe @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Aansig van - + Create Section Plane Skep snydingsvlak @@ -2262,7 +2262,7 @@ Create Frame - + Create Rebar Create Rebar @@ -3216,7 +3216,7 @@ Floor creation aborted. Profiel - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Snitvlak - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.qm b/src/Mod/Arch/Resources/translations/Arch_ar.qm index 95465a000c..bf8822b152 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ar.qm and b/src/Mod/Arch/Resources/translations/Arch_ar.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.ts b/src/Mod/Arch/Resources/translations/Arch_ar.ts index cdea74384e..5a4c967e00 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ar.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ar.ts @@ -29,7 +29,7 @@ نمط الترقيم - + The type of this building نوع هذا المبنى @@ -114,7 +114,7 @@ مساحة أرضية المحسوبة من هذه الطابق - + The placement of this object موضع هذا الكائن @@ -204,12 +204,12 @@ إتجاه البثق العادي لهذا الكائن (يبقي (0،0،0) بالنسبة للتلقائي العادي) - + The linked object الكائن المرتبط - + The line width of the rendered objects عرض الخط من الكائنات المطلية @@ -504,37 +504,37 @@ سماكة الحافة - + The diameter of the bar قطر الشريط - + The distance between the border of the beam and the first bar (concrete cover). المسافة بين حدود الحزمة والشريط الأول (غطاء خرساني). - + The distance between the border of the beam and the last bar (concrete cover). المسافة بين حدود الحزمة وآخر شريط (غطاء خرساني). - + The amount of bars كمية من القضبان - + The spacing between the bars التباعد بين القضبان - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. اتجاه لاستخدام لنشر القضبان. إبقاء (0،0،0) للاتجاه التلقائي. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. الشريحة التي ستطبق على زاوية المظهر الجانبي للقاعدة. يتم ضرب هذه القيمة في قطر الشريط. @@ -614,52 +614,52 @@ جدول البيانات لطباعة النتائج ل - + If false, non-solids will be cut too, with possible wrong results. إذا كان خطأ، سيتم قطع المواد غير الصلبة أيضا، مع نتائج خاطئة محتملة. - + The display length of this section plane عرض طول هذا القسم - + The display height of this section plane عرض ارتفاع هذا القسم - + The size of the arrows of this section plane حجم أسهم هذا القسم - + Show the cut in the 3D view عرض القطع في في عرض ثلاثي الأبعاد - + The rendering mode to use وضع تقديم للاستخدام - + If cut geometry is shown or not إذا تم عرض اقتطاع الهندسة أم لا - + If cut geometry is filled or not إذا تم ملء اقتطاع الهندسة أم لا - + The size of the texts inside this object حجم النصوص داخل هذا الكائن - + If checked, source objects are displayed regardless of being visible in the 3D model إذا تم تحديدها، يتم عرض مصدر الكائنات بغض النظر عن كونها مرئية في نموذج 3D @@ -1084,12 +1084,12 @@ لائحة سُمك الطبقات - + The line color of the projected objects لون خط الأجسام المتوقعة - + The color of the cut faces (if turned on) لون أسطح القطع (إذا كانت مشغلة) @@ -1169,27 +1169,27 @@ تحويل عرض ملمس حبوب الخشب مشغل/موقف - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. المسافة الكلية لتوزيع الأسياخ خلالها. ضع 0 لحسابها أتوماتيكيا باستخدام الحجم من شكل المضيف. - + List of placement of all the bars قائمة بموضع جميع الأشرطة - + The structure object that hosts this rebar عنصر الهيكل الذي يستضيف حديد التسليح - + The custom spacing of rebar تباعد العرف من حديد التسليح - + Shape of rebar شكل حديد التسليح @@ -1256,82 +1256,82 @@ The placement of this axis system - The placement of this axis system + وضع المحور The level of the (0,0,0) point of this level - The level of the (0,0,0) point of this level + مستوى النقطة (0,0,0) من هذا المستوى - + The shape of this object هيئة هذا العنصر - + The line width of this object عرض الخط لهذا العنصر An optional unit to express levels - An optional unit to express levels + وحدة اختيارية للتعبير عن المستويات A transformation to apply to the level mark - A transformation to apply to the level mark + تحول لتطبيقه على مستوى العلامة If true, show the level - If true, show the level + إذا كان صحيحاً، أظهر المستوى If true, show the unit on the level tag - If true, show the unit on the level tag + إذا كان صحيحاً، أظهر الوحدة على بطاقة المستوى If true, when activated, the working plane will automatically adapt to this level - If true, when activated, the working plane will automatically adapt to this level + إذا كان صحيحا، عند تفعيله، فسيتكيف سطح العمل تلقائياً مع هذا المستوى The font to be used for texts - The font to be used for texts + الخط الذي سيتم استخدامه للنصوص The font size of texts - The font size of texts + حجم الخط للنصوص Camera position data associated with this object - Camera position data associated with this object + بيانات موضع الصَّوَّارة المرتبطة بهذا العنصر If set, the view stored in this object will be restored on double-click - If set, the view stored in this object will be restored on double-click + في حالة الضبط، سيتم استعادة العرض المخزن في هذا العنصر بنقرة مزدوجة The individual face colors - The individual face colors + ألوان الوجه الفردية If set to True, the working plane will be kept on Auto mode - If set to True, the working plane will be kept on Auto mode + إذا تم ضبطه على صحيح، سيتم الاحتفاظ بسطح العمل في الوضع التلقائي An optional standard (OmniClass, etc...) code for this component - An optional standard (OmniClass, etc...) code for this component + معيار اختياري (OmniClass، إلى آخره...) رمز لهذا المكون @@ -1346,12 +1346,12 @@ The horizontal offset of waves for corrugated elements - The horizontal offset of waves for corrugated elements + الإزاحة الأفقية لموجات العناصر المموجة If the wave also affects the bottom side or not - If the wave also affects the bottom side or not + إذا كانت الموجة تؤثر أيضًا على الجانب السفلي أم لا @@ -1361,67 +1361,67 @@ An offset value to move the cut plane from the center point - An offset value to move the cut plane from the center point + قيمة إزاحة لتحريك سطح القص من نقطة المركز - + Length of a single rebar - Length of a single rebar + طول قضيب حديد التسليح - + Total length of all rebars - Total length of all rebars + الطول الإجمالي لقضبان حديد التسليح The base file this component is built upon - The base file this component is built upon + الملف الأساسي الذي تم بناء هذا المكون عليه The part to use from the base file - The part to use from the base file + الجزء المراد استخدامه من الملف الأساسي The latest time stamp of the linked file - The latest time stamp of the linked file + أحدث طابع زمني للملف المرتبط If true, the colors from the linked file will be kept updated - If true, the colors from the linked file will be kept updated + إذا كان هذا صحيحًا، فسيتم تحديث الألوان من الملف المرتبط - + The objects that must be considered by this section plane. Empty means the whole document. - The objects that must be considered by this section plane. Empty means the whole document. + العناصر التي يجب النظر فيها من قبل قسم السطح هذا. فارغة يعني كل المستند. - + The transparency of this object شفافية هذا العنصر - + The color of this object لون هذا العنصر - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) المسافة بين سطح القطع وقطع العرض الأصلي (حافظ على قيمة صغيرة جدا ولكن مختلفة عن الصفر) The street and house number of this site, with postal box or apartment number if needed - The street and house number of this site, with postal box or apartment number if needed + رقم الشارع والمنزل في هذا الموقع، مع الصندوق البريدي أو رقم الشقة إذا لزم الأمر The region, province or county of this site - The region, province or county of this site + المنطقة، الجهة أو الإقليم في هذا الموقع @@ -1431,62 +1431,62 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates + إزاحة اختيارية بين أصل النموذج (0,0,0) والنقطة التي تشير إليها الإحداثيات الجغرافية Specifies if this space is internal or external - Specifies if this space is internal or external + يحدد ما إذا كان هذا الحجم داخلي أم خارجي The width of a Landing (Second edge and after - First edge follows Width property) - The width of a Landing (Second edge and after - First edge follows Width property) + عرض الهبوط (الحافة الثانية وبعدها - الحافة الأولى تتبع خاصية العرض) The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in + تشير نسبة بلونديل إلى سلم مريح ويجب أن تتراوح بين 62 و 64 سم أو 24.5 و 25.5 بوصة The depth of the landing of these stairs - The depth of the landing of these stairs + عمق هبوط هذا السلم The depth of the treads of these stairs - Enforced regardless of Length or edge's Length - The depth of the treads of these stairs - Enforced regardless of Length or edge's Length + عمق مداس هذا السلم - إجباري بغض النظر عن الطول أو طول الحافة The height of the risers of these stairs - Enforced regardless of Height or edge's Height - The height of the risers of these stairs - Enforced regardless of Height or edge's Height + ارتفاع صعود هذا السلم - إجباري بغض النظر عن الارتفاع أو ارتفاع الحافة The direction of flight after landing - The direction of flight after landing + اتجاه الرحلة بعد الهبوط The 'absolute' top level of a flight of stairs leads to - The 'absolute' top level of a flight of stairs leads to + يؤدي المستوى الأعلى "المطلق" للسلم إلى The 'left outline' of stairs - The 'left outline' of stairs + "المخطط الأيسر" للسلم The 'left outline' of all segments of stairs - The 'left outline' of all segments of stairs + "المخطط الأيسر" لجميع أجزاء السلم Enable this to make the wall generate blocks - Enable this to make the wall generate blocks + تمكين هذا لجعل الجدار ينشئ كتل @@ -1501,17 +1501,17 @@ The horizontal offset of the first line of blocks - The horizontal offset of the first line of blocks + الإزاحة الأفقية للخط الأول من الكتل The horizontal offset of the second line of blocks - The horizontal offset of the second line of blocks + الإزاحة الأفقية للخط الثاني من الكتل The size of the joints between each block - The size of the joints between each block + مقاس الروابط بين كل جزء @@ -1521,7 +1521,7 @@ The number of broken blocks - The number of broken blocks + عدد الأجزاء المكسورة @@ -1531,22 +1531,22 @@ The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + عمق الحفرة الذي تصنعها هذه النافذة في الكائن المضيف. إذا 0، فسيتم حساب القيمة تلقائيًا. An optional object that defines a volume to be subtracted from hosts of this window - An optional object that defines a volume to be subtracted from hosts of this window + كائن اختياري يحدد الحجم الذي سيتم أخذه من مضيفي هذه النافذة The width of this window - The width of this window + عرض هذه النافذة The height of this window - The height of this window + ارتفاع هذه النافذة @@ -1556,32 +1556,32 @@ The frame size of this window - The frame size of this window + المقاس المرجعي لهذه النافذة The offset size of this window - The offset size of this window + مقاس الإزاحة لهذه النافذة The width of louvre elements - The width of louvre elements + عرض عناصر الفتحة The space between louvre elements - The space between louvre elements + المسافة بين عناصر الفتحة The number of the wire that defines the hole. If 0, the value will be calculated automatically - The number of the wire that defines the hole. If 0, the value will be calculated automatically + عدد الأسلاك التي تعرّف الحفرة. إذا 0، فسيتم حساب القيمة تلقائيًا Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + يحدد ما إذا كان نقل هذا الكائن يحرك قاعدته بدلاً من ذلك @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ نظرا ل - + Create Section Plane إنشاء قسم الخطة @@ -2262,7 +2262,7 @@ إنشاء إطار - + Create Rebar إنشاء حديد التسليح @@ -3216,7 +3216,7 @@ Floor creation aborted. الملف الشخصي - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected اضف اختيارك - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -5626,7 +5626,7 @@ Leave blank to use all objects from the document seconds - seconds + ثواني diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index 44629691c5..802bc293bc 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index 258dae3a75..dc0cd19c92 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -29,7 +29,7 @@ L'estil de numeració - + The type of this building El tipus d'aquest montatge @@ -114,7 +114,7 @@ L'àrea calculada d'aquesta planta - + The placement of this object La posició d'aquest objecte @@ -204,12 +204,12 @@ La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The linked object L'objecte enllaçat - + The line width of the rendered objects L'amplària de la línia dels objectes renderitzats @@ -504,37 +504,37 @@ Gruix de l'ala - + The diameter of the bar El diàmetre de la barra - + The distance between the border of the beam and the first bar (concrete cover). La distància entre la vora de la biga i la primera barra (coberta de formigó). - + The distance between the border of the beam and the last bar (concrete cover). La distància entre la vora de la biga i l'última barra (coberta de formigó) - + The amount of bars La quantitat de barres - + The spacing between the bars L'espaiat entre les barres - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. La direcció que s'ha d'utiñitzar per a estendre les barres. Mantín (0,0,0) per a direcció automàtica. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. L'arredoniment que s'ha d'aplicar a l'angle del perfil de base. Aquest valor es multiplica pel diámetre de la barra. @@ -614,52 +614,52 @@ El full de càlcul en què s'imprimeixen els resultats - + If false, non-solids will be cut too, with possible wrong results. Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longigud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D @@ -1084,12 +1084,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1169,27 +1169,27 @@ Activa/desactiva la visualització de la textura de veta - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. La distància total per a estendre les armadures corrugades per damunt. Manteniu 0 per a utilitzar automàticament la mida de la forma amfitrió. - + List of placement of all the bars Llista d'emplaçaments de totes les barres - + The structure object that hosts this rebar L'objecte estructuta que allotja aquesta armadura corrugada - + The custom spacing of rebar L'espaiat personalitzat de l'armadura corrugada - + Shape of rebar Forma de l'armadura corrugada @@ -1264,12 +1264,12 @@ El nivell del punt (0,0,0) d'aquest nivell - + The shape of this object La forma d'aquest objecte - + The line width of this object El gruix de la línia d'aquest objecte @@ -1364,12 +1364,12 @@ Un valor d'òfset per moure el pla de tall des del punt central - + Length of a single rebar Longitud d'una única armadura - + Total length of all rebars Longitud total de totes les armadures @@ -1394,22 +1394,22 @@ Si és cert, els colors de l'arxiu vinculat es mantindran actualitzats - + The objects that must be considered by this section plane. Empty means the whole document. Els objectes que han de ser considerats amb aquest pla de secció. Buit significa tot el document. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el pla de tall i la vista actual de tall (mantenir aquest valor molt baix però no a zero) @@ -1629,12 +1629,12 @@ No s'ha implementat encara la descripció dels atributs IFC - + If True, resulting views will be clipped to the section plane area. Si es cert, les vistes que en resulten es retallaran en la zona del pla de la secció. - + If true, the color of the objects material will be used to fill cut areas. Si és cert, el color dels objectes s'utilitzarà per a emplenar les zones retallades. @@ -1991,17 +1991,17 @@ An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + Un fitxer opcional EPW per a La localització d'aquesta web. Busqueu a la pàgina de documentació per sapiguer com obtenir una Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Mostra La Rosa del vents o l'oculta. Fa servir una escala solar. Necesita el module Ladybug - + The rebar mark - The rebar mark + La marca de reforç @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Crea un pla de secció @@ -2262,7 +2262,7 @@ Crea un marc - + Create Rebar Crea una armadura corrugada @@ -3199,7 +3199,7 @@ Floor creation aborted. Perfil - + Please select a base face on a structural object Seleccioneu una cara base en un objecte d'estructura @@ -3209,37 +3209,37 @@ Floor creation aborted. Crear referències externes - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vists per aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3393,42 +3393,42 @@ You can change that in the preferences. Podeu col·locar qualsevol cosa en un objecte Construcció excepte els objectes Lloc i Construcció ja que els objectes Construcció no els accepta. Els objectes Lloc i Construcció s'eliminaran de la selecció. Podeu canviar això en les preferències. - + Remove highlighted objects from the list above Elimina els objectes ressaltats de la llista anterior - + Add selected Afig el seleccionat - + Add selected object(s) to the scope of this section plane Afegeix l'objecte o els objectes seleccionats a l'àmbit d'aquest pla de secció - + Rotates the plane along the X axis Gira el pla al llarg de l'eix X - + Rotates the plane along the Y axis Gira el pla al llarg de l'eix Y - + Rotates the plane along the Z axis Gira el pla al llarg de l'eix Z - + Resizes the plane to fit the objects in the list above Canvia la mida del pla per a ajustar els objectes en la llista anterior - + Centers the plane on the objects in the list above Centra el pla sobre els objectes de la llista anterior @@ -3620,12 +3620,12 @@ You can change that in the preferences. Shapes elevation - Shapes elevation + Elevación de formas Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Escull quin paràmetre proporciona elevació a las formes: @@ -3635,37 +3635,37 @@ You can change that in the preferences. Shapefile module not found - Shapefile module not found + Módul Shapefil no trobat Error: Unable to download from: - Error: Unable to download from: + Error: incapaç de descarregar de: Could not download shapefile module. Aborting. - Could not download shapefile module. Aborting. + No s'ha pogut descarregar el módul shapefile. Avortant. Shapefile module not downloaded. Aborting. - Shapefile module not downloaded. Aborting. + Módul Shapefile no descarregat. Avortant. Shapefile module not found. Aborting. - Shapefile module not found. Aborting. + Módul Shapefile no trobat. Avortant. The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + La llibreria de Shapefile pot ser descarregada de la següent URL e instalada a la seva carpeta de macros: The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + La llibreria de Python de shapefile no s'ha trobat al sistema. Vols descarregar-la ara desde <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Será colocada a la yerba carpeta de macros. @@ -4247,7 +4247,7 @@ You can change that in the preferences. Creates a profile object - Creates a profile object + Crea un objecte de perfil @@ -4266,12 +4266,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra d'armadura de la cara seleccionada d'un objecte estructural - + Custom Rebar Armadura corrugada personalitzada @@ -4344,12 +4344,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Pla de secció - + Creates a section plane object, including the selected objects Crea un pla de secció incloent-hi els objectes seleccionats diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index cb1262707b..a301348822 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index f0739c7136..bd14094095 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -29,7 +29,7 @@ Styl číslování - + The type of this building Typ tohoto sestavení @@ -114,7 +114,7 @@ Vypočtená půdorysná plocha - + The placement of this object Umístění tohoto objektu @@ -204,12 +204,12 @@ Normálový směr vytažení tohoto objektu (pro (0,0,0) automatická normála) - + The linked object Propojený objekt - + The line width of the rendered objects Tloušťka čar vykreslených objektů @@ -504,37 +504,37 @@ Tloušťka příruby - + The diameter of the bar Průměr tyče - + The distance between the border of the beam and the first bar (concrete cover). Vzdálenost mezi ohraničením nosníku a prvního pruhu (betonu). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars Počet tyčí - + The spacing between the bars Rozestupy mezi tyčemi - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ Tabulka pro výstup výsledků - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Zobrazit řez v 3D pohledu - + The rendering mode to use Režim vykreslování - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object Velikost textů uvnitř tohoto objektu - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -866,22 +866,22 @@ The width of these stairs - The width of these stairs + Šířka těchto schodů The total height of these stairs - The total height of these stairs + Celková výška těchto schodů The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable + Zarovnání tohoto schodiště k jeho základní linii, je-li aplikovatelné The number of risers in these stairs - The number of risers in these stairs + Počet schodišťových stupňů @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Pohled na - + Create Section Plane Vytvoření roviny řezu @@ -2262,7 +2262,7 @@ Vytvořit rám - + Create Rebar Vytvoř výztuž @@ -3216,7 +3216,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Přidat vybrané - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3685,7 +3685,7 @@ You can change that in the preferences. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Ve vašem systému nebyla nalezena shapefile knihovna pythonu. Přejete si ji stáhnout z <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Bude uložena do složky maker. @@ -3713,7 +3713,7 @@ You can change that in the preferences. Color - Color + Barva @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Vytvoří vyztužující prut z vybrané plochy konstrukčního objektu - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Rovina řezu - + Creates a section plane object, including the selected objects Vytvoří objekt roviny řezu, který zahrnuje vybrané objekty diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index f63f0b11b3..5333b64511 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 504ec64e31..4cc8c356f6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -29,7 +29,7 @@ Das Nummerierungsformat - + The type of this building Der Typ von diesem Gebäude @@ -114,7 +114,7 @@ Die berechnete Bodenfläche dieses Bodens - + The placement of this object Die Platzierung dieses Objekts @@ -204,12 +204,12 @@ Die normalisierte Extrusionsrichtung dieses Objekts (behalte (0,0,0) für automatische Normale) - + The linked object Das verknüpfte Objekt - + The line width of the rendered objects Die Linienbreite der gerenderten Objekte @@ -504,37 +504,37 @@ Dicke des Flansches - + The diameter of the bar Der Durchmesser des Stahlstabes - + The distance between the border of the beam and the first bar (concrete cover). Der Abstand zwischen dem Rand des Balkens und dem ersten Stahlstab (Betonüberdeckung). - + The distance between the border of the beam and the last bar (concrete cover). Der Abstand zwischen dem Rand des Trägers und dem letzten Stahlstab (Betonüberdeckung). - + The amount of bars Die Anzahl der Stahlstäbe - + The spacing between the bars Der Abstand zwischen den Stahlstäben - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Grundrichtung zur Stabverteilung. (0,0,0) beibehalten für die automatische Richtung. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Das Filet das auf den Winkel des Grundprofils angewendet wird. Dieser Wert wird mit dem Stabdurchmesser multipliziert. @@ -614,52 +614,52 @@ Die Kalkulationstabelle, um die Ergebnisse zu drucken - + If false, non-solids will be cut too, with possible wrong results. Wenn falsch, werden nicht-Feststoffe auch zugeschnitten, mit möglichen falschen Ergebnissen. - + The display length of this section plane Die Anzeigelänge dieser Sektionsebene - + The display height of this section plane Die Anzeigehöhe dieser Sektionsebene - + The size of the arrows of this section plane Die Größe der Pfeile dieser Sektionsebene - + Show the cut in the 3D view Zeigen Sie den Schnitt in der 3D-Ansicht - + The rendering mode to use Der zu verwendende Rendering-Modus - + If cut geometry is shown or not Ob die Schnittgeometrie angezeigt wird oder nicht - + If cut geometry is filled or not Ob die schnitt Geometrie gefüllt ist oder nicht - + The size of the texts inside this object Die Textgröße in diesem Objekt - + If checked, source objects are displayed regardless of being visible in the 3D model Wenn aktiviert, werden Quellobjekte angezeigt, unabhängig davon, ob sie im 3D-Modell sichtbar sind @@ -1084,12 +1084,12 @@ Die Liste der Schichtdicken - + The line color of the projected objects Linienfarbe projizierter Objekte - + The color of the cut faces (if turned on) Die Farbe der Schnittflächen (sofern aktiviert) @@ -1169,27 +1169,27 @@ Schaltet die Anzeige der Holzmaserung ein / aus - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Die Gesamtentfernung zum Überspannen der Bewehrungsstäbe. Behalten Sie 0 bei, um die usprüngliche Form automatisch zu verwenden. - + List of placement of all the bars Liste der Platzierung aller Gitter - + The structure object that hosts this rebar Das Strukturobjekt, bezüglich des Wirtes des Stabes - + The custom spacing of rebar Die benutzerdefinierten Abstand der Bewehrung - + Shape of rebar Form von Bewehrung @@ -1264,12 +1264,12 @@ Die Ebene des (0,0,0) Punktes dieser Ebene - + The shape of this object Die Form dieses Objekts - + The line width of this object Die Linienbreite des Objekts @@ -1364,12 +1364,12 @@ Ein Versatzwert, um die Schnittebene vom Mittelpunkt aus zu verschieben - + Length of a single rebar Länge eines einzelnen Bewehrungsstabes - + Total length of all rebars Gesamtlänge aller Bewehrungsstäbe @@ -1394,22 +1394,22 @@ Bei wahr werden die Farben der verknüpften Datei automatisch aktualisiert - + The objects that must be considered by this section plane. Empty means the whole document. Die Objekte, die von dieser Schnittebene berücksichtigt werden müssen. Leer bedeutet das ganze Dokument. - + The transparency of this object Die Transparenz dieses Objekts - + The color of this object Die Farbe dieses Objekts - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Die Entfernung zwischen der Schnitt-Ebene und der tatsächlichen Anzeige-Ebene (nutze einen sehr kleinen Wert ungleich 0) @@ -1629,12 +1629,12 @@ Beschreibung der IFC-Attribute sind noch nicht implementiert - + If True, resulting views will be clipped to the section plane area. Wenn wahr, werden die entstehenden Ansichten durch den Bereich der Schnittebene begrenzt. - + If true, the color of the objects material will be used to fill cut areas. Wenn wahr, wird die Farbe des Objektmaterials verwendet, um Schnittflächen zu füllen. @@ -1999,7 +1999,7 @@ Zeige Windrosendiagramm oder nicht. Verwendet Solardiagrammskala. Benötigt Ladybug-Modul - + The rebar mark Die Betonstahl Markierung @@ -2142,7 +2142,7 @@ Ansicht von - + Create Section Plane Schnittebene erzeugen @@ -2262,7 +2262,7 @@ Rahmen erstellen - + Create Rebar Bewehrung erstellen @@ -3210,7 +3210,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Bitte eine Basisfläche auf einem Strukturelement auswählen @@ -3220,37 +3220,37 @@ Floor creation aborted. Externe Referenz erstellen - + Section plane settings Einstellungen Schnittebene - + Objects seen by this section plane: Objekte, die von dieser Schnittebene gesehen werden: - + Section plane placement: Platzierung der Schnittebene: - + Rotate X Drehen X - + Rotate Y Drehen Y - + Rotate Z Drehen Z - + Resize Größe ändern @@ -3405,42 +3405,42 @@ Grundstücks- und Gebäudeobjekte werden aus der Auswahl entfernt. Sie können das in den Einstellungen ändern. - + Remove highlighted objects from the list above Markierte Objekte aus der oben genannten Liste entfernen - + Add selected Auswahl hinzufügen - + Add selected object(s) to the scope of this section plane Ausgewählte Objekte in den Bereich dieser Schnittebene hinzufügen - + Rotates the plane along the X axis Rotiert die Ebene entlang X-Achse - + Rotates the plane along the Y axis Rotiert die Ebene entlang Y-Achse - + Rotates the plane along the Z axis Rotiert die Ebene entlang Z-Achse - + Resizes the plane to fit the objects in the list above Ändert die Ausdehnung der Ebene, um sie den Objekten in der oben genannten Liste anzupassen - + Centers the plane on the objects in the list above Verschiebt die Ebene, in die Mitte der in der oben genannten Liste befindlichen Objekte @@ -4278,12 +4278,12 @@ Sie können das in den Einstellungen ändern. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Erzeugt einen Bewehrungsstab basierend auf der markierten Fläche eines Strukturobjektes - + Custom Rebar Benutzerdefinierter Stab @@ -4356,12 +4356,12 @@ Sie können das in den Einstellungen ändern. Arch_SectionPlane - + Section Plane Schnittebene - + Creates a section plane object, including the selected objects Erstellt eine Schnittebene, einschließlich der ausgewählten Objekte @@ -5952,7 +5952,7 @@ Ein Gebäudegeschoss ist nicht verpflichtend, aber es ist eine übliche Praxis, Shows verbose debug messages during import and export of IFC files in the Report view panel Zeigt ausführliche Debug-Meldungen beim Import und Export von -von IFC-Dateien im Report View Panel an +IFC-Dateien in der Berichtsansicht an diff --git a/src/Mod/Arch/Resources/translations/Arch_el.qm b/src/Mod/Arch/Resources/translations/Arch_el.qm index 7dd023f829..ecc66b3ce0 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_el.qm and b/src/Mod/Arch/Resources/translations/Arch_el.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index ac1863b20e..095a6c8fc1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -29,7 +29,7 @@ Ο τύπος μορφοποίησης αρίθμησης - + The type of this building Ο τύπος αυτού του κτιρίου @@ -114,7 +114,7 @@ Το υπολογισμένο εμβαδόν αυτού του ορόφου - + The placement of this object Η τοποθέτηση αυτού του αντικειμένου @@ -204,12 +204,12 @@ Η κανονική διεύθυνση επέκτασης αυτού του αντικειμένου (κρατήστε το (0,0,0) για αυτόματη κανονική επιλογή) - + The linked object Το συνδεδεμένο αντικείμενο - + The line width of the rendered objects Το πλάτος γραμμής των παρεχόμενων αντικειμένων @@ -504,37 +504,37 @@ Πάχος του πέλματος - + The diameter of the bar Η διάμετρος της ράβδου - + The distance between the border of the beam and the first bar (concrete cover). Η απόσταση μεταξύ του ορίου της δοκού και της πρώτης ράβδου (κάλυμμα σκυροδέματος). - + The distance between the border of the beam and the last bar (concrete cover). Η απόσταση μεταξύ του ορίου της δοκού και της τελευταίας ράβδου (κάλυμμα σκυροδέματος). - + The amount of bars Το πλήθος ράβδων - + The spacing between the bars Η απόσταση μεταξύ των ράβδων - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Η κατεύθυνση προς την οποία θα διαμοιραστούν οι ράβδοι. Κρατήστε το (0,0,0) για αυτόματη κατεύθυνση. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Το στρογγύλεμα που θα εφαρμοστεί στη γωνία του βασικού προφίλ. Αυτή η τιμή πολλαπλασιάζεται με τη διάμετρο της ράβδου. @@ -614,52 +614,52 @@ Το υπολογιστικό φύλλο στο οποίο να εκτυπωθούν τα αποτελέσματα - + If false, non-solids will be cut too, with possible wrong results. Aν αυτό είναι ψευδές, θα περικοπούν και τα μη στερεά στοιχεία, με πιθανώς λανθασμένα αποτελέσματα. - + The display length of this section plane Το μήκος εμφάνισης αυτού του επιπέδου τομής - + The display height of this section plane Το ύψος εμφάνισης αυτού του επιπέδου τομής - + The size of the arrows of this section plane Το μέγεθος των βελών αυτού του επιπέδου τομής - + Show the cut in the 3D view Εμφανίστε την περικοπή σε τρισδιάστατη προβολή - + The rendering mode to use Η λειτουργία αποτύπωσης προς χρήση - + If cut geometry is shown or not Αν η κομμένη γεωμετρική οντότητα απεικονίζεται ή όχι - + If cut geometry is filled or not Αν η κομμένη γεωμετρική οντότητα είναι γεμάτη ή όχι - + The size of the texts inside this object Το μέγεθος των κειμένων μέσα σε αυτό το αντικείμενο - + If checked, source objects are displayed regardless of being visible in the 3D model Εάν επιλεχθούν, τα πηγαία αντικείμενα εμφανίζονται ανεξάρτητα από το αν είναι ορατά στο τρισδιάστατο μοντέλο @@ -1084,12 +1084,12 @@ Η λίστα με τα πάχη στρωμάτων - + The line color of the projected objects Το χρώμα γραμμής των προβεβλημένων αντικειμένων - + The color of the cut faces (if turned on) Το χρώμα των κομμένων όψεων (αν είναι ενεργοποιημένο) @@ -1169,27 +1169,27 @@ Ενεργοποιεί ή απενεργοποιεί την απεικόνιση της υφής ρόζων ξύλου - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Η συνολική απόσταση την οποία θα καλύψουν οι οπλισμοί. Κρατήστε το 0 για να χρησιμοποιήσετε αυτόματα το μέγεθος του γονικού σχήματος. - + List of placement of all the bars Λίστα τοποθέτησης όλων των ράβδων - + The structure object that hosts this rebar Τα δομικό στοιχείο που φιλοξενεί αυτόν τον οπλισμό - + The custom spacing of rebar Η προσαρμοσμένη απόσταση του οπλισμού - + Shape of rebar Σχήμα του οπλισμού @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object Το σχήμα αυτού του αντικειμένου - + The line width of this object Το πλάτος γραμμής αυτού του αντικειμένου @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Μήκος μιας μεμονωμένης ενισχυτικής ράβδου - + Total length of all rebars Συνολικό μήκος όλων των ενισχυτικών ράβδων @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Η διαφάνεια αυτού του αντικειμένου - + The color of this object Το χρώμα αυτού του αντικειμένου - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Η απόσταση μεταξύ του κομμένου επιπέδου και της πραγματικής προβολής περικοπής (κρατήστε μια πολύ μικρή τιμή αλλά όχι μηδέν) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Προβολή - + Create Section Plane Δημιουργήστε επίπεδο τομής @@ -2262,7 +2262,7 @@ Δημιουργήστε Πλαίσιο - + Create Rebar Δημιουργήστε Οπλισμό @@ -3215,7 +3215,7 @@ Floor creation aborted. Προφίλ - + Please select a base face on a structural object Παρακαλώ επιλέξτε μια όψη βάσης σε ένα δομικό στοιχείο @@ -3225,37 +3225,37 @@ Floor creation aborted. Δημιουργία εξωτερικής αναφοράς - + Section plane settings Section plane settings - + Objects seen by this section plane: Αντικείμενα που φαίνονται από αυτό το επίπεδο τομής: - + Section plane placement: Section plane placement: - + Rotate X Περιστροφή Υ - + Rotate Y Περιστροφή Υ - + Rotate Z Περιστροφή Ζ - + Resize Αλλαγή μεγέθους @@ -3412,42 +3412,42 @@ You can change that in the preferences. Αυτό μπορείτε να το αλλάξετε στις προτιμήσεις. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Προσθήκη επιλεγμένων - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Περιστρέψτε το επίπεδο στον άξονα X - + Rotates the plane along the Y axis Περιστρέψτε το επίπεδο στον άξονα Y - + Rotates the plane along the Z axis Περιστρέψτε το επίπεδο στον άξονα Z - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4285,12 +4285,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Δημιουργεί μια ενισχυτική ράβδο από την επιλεγμένη επιφάνεια ενός δομικού στοιχείου - + Custom Rebar Προσαρμοσμένος οπλισμός @@ -4363,12 +4363,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Επίπεδο Τομής - + Creates a section plane object, including the selected objects Δημιουργεί ένα στοιχείο επιπέδου τομής, συμπεριλαμβάνοντας τα επιλεγμένα στοιχεία diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 115e7993f5..432e220377 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index 2dfe260e3d..55d5d18404 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -29,7 +29,7 @@ El estilo de numeración - + The type of this building Tipo de este edificio @@ -114,7 +114,7 @@ La superficie calculada para este piso - + The placement of this object La posición de este objeto @@ -204,12 +204,12 @@ Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The linked object El objeto vinculado - + The line width of the rendered objects La anchura de la línea de los objetos renderizados @@ -504,37 +504,37 @@ Espesor de la brida - + The diameter of the bar El diámetro de la barra - + The distance between the border of the beam and the first bar (concrete cover). La distancia entre el borde de la viga y la primera barra (cubierta de hormigón). - + The distance between the border of the beam and the last bar (concrete cover). La distancia entre el borde de la viga y la última barra (cubierta concreta). - + The amount of bars La cantidad de barras - + The spacing between the bars El espacio entre barras - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. La dirección a utilizar para difundir las barras. Mantener (0,0,0) para la dirección automática. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. El redondeo para aplicar en el ángulo del perfil base. Este valor se multiplica por el diámetro de la barra. @@ -614,52 +614,52 @@ La hoja de cálculo para imprimir los resultados - + If false, non-solids will be cut too, with possible wrong results. Si es false, los objetos no sólidos se cortarán, con posibles resultados equivocados. - + The display length of this section plane Mostrar la longitud del plano de sección - + The display height of this section plane Mostrar la altura de este plano de sección - + The size of the arrows of this section plane El tamaño de las flechas de este plano de sección - + Show the cut in the 3D view Mostrar el corte en la vista 3D - + The rendering mode to use El modo de renderizado a utilizar - + If cut geometry is shown or not Si la geometría de corte se muestra o no - + If cut geometry is filled or not Si el corte de la geometría está lleno o no - + The size of the texts inside this object El tamaño de los textos dentro de este objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Si está marcada, se muestran objetos de origen sin importar ser visible en el modelo 3D @@ -1084,12 +1084,12 @@ La lista de espesores por capa - + The line color of the projected objects El color de línea de los objetos proyectados - + The color of the cut faces (if turned on) El color de las caras cortadas (si está encendido) @@ -1169,27 +1169,27 @@ Activa o desactiva la textura del grano de madera - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. La distancia total donde se colocarán las varillas. 0 para automáticamente usar la geometría del objeto padre. - + List of placement of all the bars Lista de colocación de todas las varillas - + The structure object that hosts this rebar El Objeto de Estructura que contiene esta varilla - + The custom spacing of rebar El espacio personalizado de la varilla - + Shape of rebar Forma de la varilla @@ -1264,12 +1264,12 @@ El nivel del punto (0,0,0) de este nivel - + The shape of this object La forma de este objeto - + The line width of this object El ancho de la linea de este objeto @@ -1364,12 +1364,12 @@ Un valor de desplazamiento para mover el plano de corte desde el punto central - + Length of a single rebar Longitud de un solo refuerzo - + Total length of all rebars Longitud total de todos los refuerzos @@ -1394,22 +1394,22 @@ Si es verdadero, los colores del archivo vinculado se mantendrán actualizados - + The objects that must be considered by this section plane. Empty means the whole document. Los objetos que deben ser considerados por este plano de sección. Vacío significa todo el documento. - + The transparency of this object La transparencia de este objeto - + The color of this object El color de este objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el plano de corte y la vista actual de corte (mantener esto a un valor muy bajo pero no cero) @@ -1629,12 +1629,12 @@ La descripción de los atributos IFC aún no se han implementado - + If True, resulting views will be clipped to the section plane area. Si es verdadero, las vistas resultantes se verán acopladas al área de plano de sección. - + If true, the color of the objects material will be used to fill cut areas. Si es verdadero, el color del material de los objetos se utilizará para llenar las áreas cortadas. @@ -1999,7 +1999,7 @@ Mostrar diagrama de rosa de viento o no. Usa una escala de diagrama solar. Necesita el módulo Ladybug - + The rebar mark La marca de refuerzo @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Crear el plano de sección @@ -2262,7 +2262,7 @@ Crear Marco - + Create Rebar Crear Ferralla @@ -3214,7 +3214,7 @@ Floor creation aborted. Perfíl - + Please select a base face on a structural object Por favor seleccione una cara base en un objeto estructural @@ -3224,37 +3224,37 @@ Floor creation aborted. Crear refencia externa - + Section plane settings Ajustes de plano de sección - + Objects seen by this section plane: Objetos vistos por esta seccion del plano: - + Section plane placement: Ubicación de plano de sección: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3409,42 +3409,42 @@ Objetos de Sitio y de Edificio serán removidos de la selección. Tu puedes cambiar esto en las preferencias. - + Remove highlighted objects from the list above Eliminar objetos resaltados de la lista anterior - + Add selected Añadir la selección - + Add selected object(s) to the scope of this section plane Añadir objeto(s) seleccionado al alcance de este plano de sección - + Rotates the plane along the X axis Rota el plano a lo largo del eje X - + Rotates the plane along the Y axis Rota el plano a lo largo del eje Y - + Rotates the plane along the Z axis Rota el plano a lo largo del eje Z - + Resizes the plane to fit the objects in the list above Redimensiona el plano para encajar los objetos en la lista anterior - + Centers the plane on the objects in the list above Centra el plano en los objetos de la lista anterior @@ -3681,7 +3681,7 @@ Tu puedes cambiar esto en las preferencias. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + La biblioteca python shapefile no se encontró en su sistema. ¿Desea descargarla ahora desde <a href="https://github.com/GeospatialPython/pyshp">https://github. om/GeospatialPython/pyshp</a>? Será colocada en tu carpeta de macros. @@ -4282,12 +4282,12 @@ Tu puedes cambiar esto en las preferencias. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra de refuerzo de la cara seleccionada de un objeto estructural - + Custom Rebar Refuerzo personalizado @@ -4360,12 +4360,12 @@ Tu puedes cambiar esto en las preferencias. Arch_SectionPlane - + Section Plane Plano de sección - + Creates a section plane object, including the selected objects Crea una sección plana de un objeto, incluidos los objetos seleccionados diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index adce0f81e6..bd10e2ec2c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index 9de6bf9f9e..9c5dd22302 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -29,7 +29,7 @@ Zenbakitze-estiloa - + The type of this building Eraikin honen mota @@ -114,7 +114,7 @@ Solairu honetan kalkulatutako zoru-area - + The placement of this object Objektu honen kokapena @@ -204,12 +204,12 @@ Objektu honen estrusio-norabide normala (mantendu (0,0,0) normal automatikorako) - + The linked object Estekatutako objektua - + The line width of the rendered objects Errendatutako objektuen lerro-luzera @@ -504,37 +504,37 @@ Bridaren lodiera - + The diameter of the bar Hagaren diametroa - + The distance between the border of the beam and the first bar (concrete cover). Habearen ertzaren eta lehen hagaren arteko distantzia (hormigoizko estalkia). - + The distance between the border of the beam and the last bar (concrete cover). Habearen ertzaren eta azken hagaren arteko distantzia (hormigoizko estalkia). - + The amount of bars Haga kopurua - + The spacing between the bars Hagen arteko tartea - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Hagak hedatzeko erabiliko den norabidea. Mantentu (0,0,0) norabide automatikoa erabiltzeko. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Oinarri-profilaren angeluari aplikatuko zaion biribiltzea. Balio hau hagaren diametroarekin biderkatzen da. @@ -614,52 +614,52 @@ Emaitzak inprimatzeko erabiliko den kalkulu-orria - + If false, non-solids will be cut too, with possible wrong results. Gezurra bada, solidoak ez direnak ere moztuko dira, eta emaitzak okerrak izan daitezke. - + The display length of this section plane Sekzio-plano honen bistaratze-luzera - + The display height of this section plane Sekzio-plano honen bistaratze-altuera - + The size of the arrows of this section plane Sekzio-plano honen gezien tamaina - + Show the cut in the 3D view Erakutsi ebaketa 3D bistan - + The rendering mode to use Erabiliko den errendatze-modua - + If cut geometry is shown or not Ebaketa-geometria erakutsiko den ala ez - + If cut geometry is filled or not Ebaketa-geometria beteta dagoen ala ez - + The size of the texts inside this object Objektu honen barruko testuen tamaina - + If checked, source objects are displayed regardless of being visible in the 3D model Markatuta badago, iturburu-objektuak erakutsi egingo dira, 3D ereduan ikusgarriak izan zein ez @@ -1084,12 +1084,12 @@ Geruza-lodieren zerrenda - + The line color of the projected objects Proiektatutako objektuen lerro-kolorea - + The color of the cut faces (if turned on) Mozketa-aurpegien kolorea (aktibatuta badago) @@ -1169,27 +1169,27 @@ Egur-zainen testura aktibatzen/desaktibatzen du - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Armadura-barren arteko argiek izango duten distantzia osoa. Utzi 0 balioa ostalariaren formaren tamaina automatikoki erabiltzeko. - + List of placement of all the bars Barra guztien kokapen-zerrenda - + The structure object that hosts this rebar Armadura-barra hau ostatatzen duen egitura-objektua - + The custom spacing of rebar Armadura-barraren tarte pertsonalizatua - + Shape of rebar Armadura-barraren forma @@ -1264,12 +1264,12 @@ Maila honetako (0,0,0) puntuaren maila - + The shape of this object Objektu honen forma - + The line width of this object Objektu honen lerro-zabalera @@ -1364,12 +1364,12 @@ Ebaketa planoa puntu zentraletik mugitzeko desplazamenduko balioa - + Length of a single rebar Armadura-barra bakar baten luzera - + Total length of all rebars Armadura-barra guztien luzera osoa @@ -1394,22 +1394,22 @@ Egia bada, estekatutako fitxategiarekin koloreak eguneratuta mantenduko dira - + The objects that must be considered by this section plane. Empty means the whole document. Sekzio-plano honek kontuan hartu behar diren objektuak. Hutsik badago, dokumentu osoa hartuko da. - + The transparency of this object Objektu honen gardentasuna - + The color of this object Objektu honen kolorea - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Mozte-planoaren eta uneko bistaren moztearen arteko distantzia (balio horrek oso txikia izan behar du, baina ez zero) @@ -1629,12 +1629,12 @@ IFC atributuen deskribapena ez da oraindik garatu - + If True, resulting views will be clipped to the section plane area. Egia bada, emaitzako bistak sekzio-planoaren areara moztuko dira. - + If true, the color of the objects material will be used to fill cut areas. Egia bada, objektuen materialaren kolorea mozte-areak betetzeko erabiliko da. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Honen ikuspegia - + Create Section Plane Sortu ebakidura-planoa @@ -2262,7 +2262,7 @@ Sortu markoa - + Create Rebar Sortu armadura-barra @@ -3216,7 +3216,7 @@ Solairuaren sorrera utzi egin da. Profila - + Please select a base face on a structural object Hautatu oinarri-aurpegi bat egiturazko objektu batean @@ -3226,37 +3226,37 @@ Solairuaren sorrera utzi egin da. Sortu kanpoko erreferentzia - + Section plane settings Sekzio-planoaren ezarpenak - + Objects seen by this section plane: Sekzio-plano honek ikusten dituen objektuak: - + Section plane placement: Sekzio-planoaren kokapena: - + Rotate X Biratu X - + Rotate Y Biratu Y - + Rotate Z Biratu Z - + Resize Aldatu tamaina @@ -3413,42 +3413,42 @@ Guneak eta eraikinak hautapenetik kendu egingo dira. Portaera hori aldatu egin daiteke hobespenetan. - + Remove highlighted objects from the list above Kendu nabarmendutako objektuak goiko zerrendatik - + Add selected Gehitu hautatuak - + Add selected object(s) to the scope of this section plane Gehitu hautatutako objektua(k) sekzio-plano honen esparrura - + Rotates the plane along the X axis Planoa X ardatzean biratzen du - + Rotates the plane along the Y axis Planoa Y ardatzean biratzen du - + Rotates the plane along the Z axis Planoa Z ardatzean biratzen du - + Resizes the plane to fit the objects in the list above Planoa goiko zerrendako objektuekin doitzeko biratzen du - + Centers the plane on the objects in the list above Planoa goiko zerrendako objektuetan zentratzen du @@ -3625,12 +3625,12 @@ Portaera hori aldatu egin daiteke hobespenetan. Create profile - Create profile + Sortu profila Profile settings - Profile settings + Profilaren ezarpenak @@ -3640,47 +3640,47 @@ Portaera hori aldatu egin daiteke hobespenetan. Shapes elevation - Shapes elevation + Formen garaiera Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Aukeratu zein eremuk emango dituen formen garaierak: No shape found in this file - No shape found in this file + Ez da formarik aurkitu fitxategi honetan Shapefile module not found - Shapefile module not found + Shapefile modulua ez da aurkitu Error: Unable to download from: - Error: Unable to download from: + Errorea: Ezin da deskargatu hemendik: Could not download shapefile module. Aborting. - Could not download shapefile module. Aborting. + Ezin izan da shapefile modulua deskargatu. Abortatzen. Shapefile module not downloaded. Aborting. - Shapefile module not downloaded. Aborting. + Shapefile modulua ez da deskargatu. Abortatzen. Shapefile module not found. Aborting. - Shapefile module not found. Aborting. + Shapefile modulua ez da aurkitu. Abortatzen. The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + Shapefile liburutegia hurrengo URLtik deskargatu daiteke, zure makroen karpetan instalatu dadin: @@ -4286,12 +4286,12 @@ Portaera hori aldatu egin daiteke hobespenetan. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Indartze-haga bat sortzen du egiturazko objektu batean hautatutako aurpegitik abiatuta - + Custom Rebar Armadura-barra pertsonalizatua @@ -4364,12 +4364,12 @@ Portaera hori aldatu egin daiteke hobespenetan. Arch_SectionPlane - + Section Plane Sekzio-planoa - + Creates a section plane object, including the selected objects Sekzio-plano bat sortzen du, hautatutako objektuak barne hartuz @@ -6132,7 +6132,7 @@ if you start getting crashes when you set multiple cores. Number of cores to use (experimental) - Number of cores to use (experimental) + Erabiliko den nukleo kopurua (esperimentala) diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.qm b/src/Mod/Arch/Resources/translations/Arch_fi.qm index 7c41cdbba7..364b5fe5dd 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fi.qm and b/src/Mod/Arch/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index a1c3919429..0c56043257 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -29,9 +29,9 @@ Numerointityyli - + The type of this building - The type of this building + Tämän rakennuksen tyyppi @@ -56,12 +56,12 @@ An optional description for this component - An optional description for this component + Valinnainen kuvaus tälle komponentille An optional tag for this component - An optional tag for this component + Valinnainen tunniste tälle osalle @@ -114,7 +114,7 @@ The computed floor area of this floor - + The placement of this object Tämän kohteen sijoittelu @@ -204,12 +204,12 @@ The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Näkymä - + Create Section Plane Luo lohkotaso @@ -2262,7 +2262,7 @@ Luo kehys - + Create Rebar Luo raudoitustanko @@ -3216,7 +3216,7 @@ Floor creation aborted. Profiili - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected - Add selected + Lisää valitut - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3540,7 +3540,7 @@ You can change that in the preferences. Use sketches - Use sketches + Käytä luonnoksia @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Luo betoniterästangon valitusta rakenteellisen kohteen näkymäpinnasta - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Osan taso - + Creates a section plane object, including the selected objects Luo lohkotaso-objektin ottaen mukaan valitut objektit @@ -4991,7 +4991,7 @@ Leave blank to use all objects from the document Add selected - Add selected + Lisää valitut @@ -5349,12 +5349,12 @@ Leave blank to use all objects from the document General options - General options + Yleiset asetukset Import options - Import options + Tuontiasetukset @@ -5644,7 +5644,7 @@ Leave blank to use all objects from the document Use sketches - Use sketches + Käytä luonnoksia @@ -5654,12 +5654,12 @@ Leave blank to use all objects from the document Exclude list: - Exclude list: + Jätä pois luettelo: Reuse similar entities - Reuse similar entities + Käytä samankaltaisia kokonaisuuksia uudelleen @@ -5674,7 +5674,7 @@ Leave blank to use all objects from the document IFC version - IFC version + IFC versio @@ -5684,22 +5684,22 @@ Leave blank to use all objects from the document IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 Spaces - Spaces + Tilat Line style: - Line style: + Viivan tyyli: @@ -5709,17 +5709,17 @@ Leave blank to use all objects from the document Dashed - Dashed + Katkoviiva Dotted - Dotted + Pisteviiva Dashdot - Dashdot + Katkopisteviiva @@ -5744,7 +5744,7 @@ Leave blank to use all objects from the document Use material color as shape color - Use material color as shape color + Käytä materiaalin väriä muodon värinä @@ -5823,12 +5823,12 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. IFC export - IFC export + IFC-vienti Show this dialog when exporting - Show this dialog when exporting + Näytä tämä ikkuna vietäessä @@ -5927,7 +5927,7 @@ However, at FreeCAD, we believe having a building should not be mandatory, and t Add default building if one is not found in the document (no standard) - Add default building if one is not found in the document (no standard) + Lisää oletusrakennus, jos asiakirjasta ei sellaista löydy (ei standardia) @@ -5944,27 +5944,27 @@ A building storey is not mandatory but a common practice to have at least one in IFC file units - IFC file units + IFC tiedostoyksiköt Metric - Metric + Metrinen Imperial - Imperial + Brittiläinen IFC import - IFC import + IFC-tuonti Show this dialog when importing - Show this dialog when importing + Näytä tämä ikkuna tuotaessa @@ -6026,17 +6026,17 @@ they will be treated as one. Import IFC properties in spreadsheet - Import IFC properties in spreadsheet + Tuo IFC ominaisuudet laskentataulukossa IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. - IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. + IFC-tiedostot voivat sisältää epäpuhtaita tai ei-kiinteitä geometrioita. Jos tämä valinta on valittuna, kaikki geometria tuodaan, niiden pätevyydestä riippumatta. Allow invalid shapes - Allow invalid shapes + Salli virheelliset muodot @@ -6060,22 +6060,22 @@ FreeCAD object properties Export type - Export type + Viennin tyyppi Standard model - Standard model + Vakiomalli Structural analysis - Structural analysis + Rakenteellinen analyysi Standard + structural - Standard + structural + Standardi + rakenteellinen @@ -6176,7 +6176,7 @@ are placed in a 'Group' instead. &Arch - &Arch + &Kaari @@ -6191,7 +6191,7 @@ are placed in a 'Group' instead. Modification - Modification + Muokkaus diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.qm b/src/Mod/Arch/Resources/translations/Arch_fil.qm index ae8d903a80..e2a0b8b5bd 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fil.qm and b/src/Mod/Arch/Resources/translations/Arch_fil.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.ts b/src/Mod/Arch/Resources/translations/Arch_fil.ts index 760001a6ca..a13f837d71 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fil.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fil.ts @@ -29,7 +29,7 @@ Ang estilo sa pagnuumero - + The type of this building Ang uri ng pagbuo @@ -114,7 +114,7 @@ Ang nakalkulang kabuuang sukat ng sahig ng palapag na ito - + The placement of this object Ang kinatatayuan ng mga bagay na ito @@ -204,12 +204,12 @@ Ang normal na direksyon ng extrusion ng bagay na ito (keep (0,0,0) para sa automatic normal) - + The linked object Ang naka-link na bagay - + The line width of the rendered objects Ang lapad ng linya ng rendered na mga bagay @@ -504,37 +504,37 @@ Kapal ng flange - + The diameter of the bar Ang dyametro ng bar - + The distance between the border of the beam and the first bar (concrete cover). Ang distansya sa pagitan ng border ng beam at ng unang bar (kongkretong takip). - + The distance between the border of the beam and the last bar (concrete cover). Ang distansya sa pagitan ng border ng beam at ng huling bar (kongkretong takip). - + The amount of bars Ang bilang ng mga bar - + The spacing between the bars Ang pagitan sa pagitan ng mga bar - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Ang direksyon na gagamitin sa pag kalat ng mga bar. Panatilihin(0,0,0) para sa direksyong awtomatiko. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Ang fillet na iaaplay sa anggulo ng base profile. Ang halaga nito ay pinarami ng bar diameter. @@ -614,52 +614,52 @@ Ang spreadsheet upang maemprenta ang mga resulta - + If false, non-solids will be cut too, with possible wrong results. Kung mali, ang mga di-solido ay pumutol din, na may posibleng mga maling resulta. - + The display length of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The display height of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The size of the arrows of this section plane Ang sukat ng palaso sa sekyon na ito ay patag - + Show the cut in the 3D view Ipakita ang hiwa sa tatlong dimensyong tanaw - + The rendering mode to use Ang maglalapat sa paraan ng paggamit - + If cut geometry is shown or not Kapag hiniwa ang heometriya ito ba ay magpapakita o hindi - + If cut geometry is filled or not Kapag hiniwa ang heometriya ito ba ay tambak o hindi - + The size of the texts inside this object Ang sukat ng mga teksto sa loob ng bagay na ito - + If checked, source objects are displayed regardless of being visible in the 3D model Kapag tsek, ang pinagmulan ng bagay ay ipamalas ng hindi alintana ang pagiging tatlong dimensyong modelo na nakikita @@ -1084,12 +1084,12 @@ Ang listahan ng mga hanay thicknesses - + The line color of the projected objects Ang kulay ng linya ng inaasahang layunin - + The color of the cut faces (if turned on) Ang kulay ng mga mukha ng cut (kung naka-on) @@ -1169,27 +1169,27 @@ Binubuksan ang display ng kahoy grain texture sa on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Ang kabuuang agwat upang mapalawak ang mga rebelde. Panatilihin ang 0 upang awtomatikong gamitin ang sukat ng hugis ng host. - + List of placement of all the bars Listahan ng paglalagay ng kabuohan ng mga bar - + The structure object that hosts this rebar Ang bagay na istraktura na nagho-host ng rebar na ito - + The custom spacing of rebar Ang custom spacing ng rebar - + Shape of rebar Hugis ng rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Haba ng isang rebar - + Total length of all rebars Kabuuang haba ng lahat ng rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Tingin ng mga - + Create Section Plane Gumawa ng mga bahaging patag @@ -2262,7 +2262,7 @@ Gumawa ng Kuwadro - + Create Rebar Gumawa ng mga Konteksto @@ -3215,7 +3215,7 @@ Floor creation aborted. Profile - + Please select a base face on a structural object Please select a base face on a structural object @@ -3225,37 +3225,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3412,42 +3412,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Idagdag ang mga napili - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4285,12 +4285,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Gumawa ng isang malakas na bar na nagmula sa mga pagpipilian sa hinaharap ng mga bagay na istraktural - + Custom Rebar Pasadya na bar @@ -4363,12 +4363,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Patag na bahagi - + Creates a section plane object, including the selected objects Gumawa ng isang patag na bahagi na bagay, kabilang ang mga bagay na napili diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index 6392eeda22..79a1dc1347 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index fab47c0b43..e6e5510104 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -29,7 +29,7 @@ Le style de numérotation - + The type of this building Le type de ce bâtiment @@ -114,7 +114,7 @@ La surface de plancher calculée de cet étage - + The placement of this object Le positionnement de cet objet @@ -204,12 +204,12 @@ La direction d'extrusion normale de cet objet (mettre (0,0,0) pour normale automatique) - + The linked object L’objet lié - + The line width of the rendered objects La largeur de la ligne des objets rendus @@ -504,37 +504,37 @@ Épaisseur de la bride - + The diameter of the bar Le diamètre de la barre - + The distance between the border of the beam and the first bar (concrete cover). La distance entre le bord de la poutre et la première barre (enrobage en béton). - + The distance between the border of the beam and the last bar (concrete cover). La distance entre le bord de la poutre et la dernière barre (enrobage en béton). - + The amount of bars La quantité de barres - + The spacing between the bars L’espacement entre les barres - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. La direction dans laquelle répartir les barres. Laisser à (0,0,0) pour la direction automatique. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Le congé à appliquer à l’angle du profil de base. Cette valeur est multipliée par le diamètre de la barre. @@ -614,52 +614,52 @@ La feuille de calcul où imprimer les résultats - + If false, non-solids will be cut too, with possible wrong results. Si « false », les éléments non pleins seront également coupés, avec de possibles mauvais résultats. - + The display length of this section plane La longueur d'affichage de ce plan de coupe - + The display height of this section plane La hauteur affichée de ce plan de coupe - + The size of the arrows of this section plane La taille des flèches de ce plan de coupe - + Show the cut in the 3D view Montrer la coupe dans la vue 3D - + The rendering mode to use Le mode de rendu à utiliser - + If cut geometry is shown or not Si la géométrie de la coupe est affichée ou non - + If cut geometry is filled or not Si la géométrie de la coupe est remplie ou non - + The size of the texts inside this object La taille des textes à l’intérieur de cet objet - + If checked, source objects are displayed regardless of being visible in the 3D model Si cochée, les objets source sont affichés quelle que soit leur visibilité dans le modèle 3D @@ -1084,12 +1084,12 @@ La liste des épaisseurs de couche - + The line color of the projected objects La couleur de la ligne des objets projetés - + The color of the cut faces (if turned on) La couleur des faces coupées (si activé) @@ -1169,27 +1169,27 @@ Active ou désactive l’affichage de la texture de grain de bois - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. La distance totale pour passer par dessus les ronds à béton. Garder le 0 pour utiliser automatiquement la taille de la forme hôte. - + List of placement of all the bars Liste de placement de toutes les barres - + The structure object that hosts this rebar La structure objet qui héberge cette armature - + The custom spacing of rebar L’espacement personnalisé de l'armature - + Shape of rebar Forme de l'armature @@ -1264,12 +1264,12 @@ Le niveau du point (0,0,0) de cet étage - + The shape of this object La forme de cet objet - + The line width of this object La largeur de la ligne des objets @@ -1364,12 +1364,12 @@ Une valeur de décalage pour déplacer le plan de coupe depuis le point central - + Length of a single rebar Longueur d’une seule armature - + Total length of all rebars Longueur totale de toutes les armatures @@ -1394,22 +1394,22 @@ Si vrai, les couleurs du fichier lié resteront mises à jour - + The objects that must be considered by this section plane. Empty means the whole document. Les objets qui doivent être pris en compte par ce plan de coupe. Vide signifie tous les objets du document. - + The transparency of this object La transparence de cet objet - + The color of this object La couleur de cet objet - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distance entre le plan de coupe et de la vue réelle coupé (cela garde une valeur très faible mais pas nulle) @@ -1629,12 +1629,12 @@ La description des attributs IFC n'est pas encore implémentée - + If True, resulting views will be clipped to the section plane area. Si vrai, les vues résultantes seront restreintes à la zone du plan de section. - + If true, the color of the objects material will be used to fill cut areas. Si vrai, la couleur des objets sera utilisée pour remplir des zones coupées. @@ -1999,7 +1999,7 @@ Affiche ou non le diagramme de la rose des vents. Utilise l'échelle du diagramme solaire. Nécessite le module Ladybug - + The rebar mark La marque des barres d'armature @@ -2142,7 +2142,7 @@ Vue de - + Create Section Plane Création d'un plan de coupe @@ -2262,7 +2262,7 @@ Créer une ossature - + Create Rebar Créer des barres d'armature @@ -3212,7 +3212,7 @@ Création de plancher abandonnée. Profil - + Please select a base face on a structural object Veuillez sélectionner une face support sur un objet de structure @@ -3222,37 +3222,37 @@ Création de plancher abandonnée. Créer une référence externe - + Section plane settings Réglage du plan de coupe - + Objects seen by this section plane: Objets vus dans ce plan de coupe : - + Section plane placement: Emplacement du plan de coupe : - + Rotate X Rotation X - + Rotate Y Rotation Y - + Rotate Z Rotation Z - + Resize Redimensionner @@ -3403,42 +3403,42 @@ You can change that in the preferences. Vous pouvez mettre n’importe quoi sauf les objets Emplacement et Bâtiment dans un objet Bâtiment. Les objets Bâtiment ne sont pas autorisés à accepter un objet Emplacement ou Bâtiment. Les objets Site ou Bâtiment seront supprimés de la sélection. Vous pouvez modifier cela dans les préférences. - + Remove highlighted objects from the list above Supprimer les objets en surbrillance de la liste ci-dessus - + Add selected Ajouter la sélection - + Add selected object(s) to the scope of this section plane Ajouter un(des) objet(s) sélectionné(s) au champ d'application de ce plan de coupe - + Rotates the plane along the X axis Rotation du plan autour de l'axe X - + Rotates the plane along the Y axis Rotation du plan autour de l'axe Y - + Rotates the plane along the Z axis Rotation du plan autour de l'axe Z - + Resizes the plane to fit the objects in the list above Redimensionner le plan pour l'adapter aux objets de la liste ci-dessus - + Centers the plane on the objects in the list above Centrer le plan sur les objets de la liste ci-dessus @@ -3610,17 +3610,17 @@ You can change that in the preferences. Rebar tools - Outils de barre latérale + Outils pour les armatures Create profile - Créer un profil + Créer un profilé Profile settings - Paramètres du profil + Paramètres du profilé @@ -3848,7 +3848,7 @@ You can change that in the preferences. Axis tools - Outils de l’axe + Outils pour les axes @@ -3983,12 +3983,12 @@ You can change that in the preferences. Fence - Barrière + Clôture Creates a fence object from a selected section, post and path - Créer un objet barrière à partir de la section sélectionnée, du poteau et du chemin + Créer un objet clôture à partir de la section sélectionnée, du poteau et du chemin @@ -4111,7 +4111,7 @@ You can change that in the preferences. Material tools - Outils matériaux + Outils pour les matériaux @@ -4184,7 +4184,7 @@ You can change that in the preferences. Panel tools - Outils de panneau + Outils pour panneaux @@ -4244,7 +4244,7 @@ You can change that in the preferences. Pipe tools - Outils tuyauterie + Outils pour la tuyauterie @@ -4257,7 +4257,7 @@ You can change that in the preferences. Creates a profile object - Crée un objet profil + Crée un objet profilé @@ -4276,12 +4276,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crée une barre de renfort par rapport à la face sélectionnée d'un objet structurel - + Custom Rebar Armature personnalisée @@ -4354,12 +4354,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plan de section - + Creates a section plane object, including the selected objects Crée un plan de coupe à partir des objets sélectionnés diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.qm b/src/Mod/Arch/Resources/translations/Arch_gl.qm index d135cd1dd7..48f01646b2 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_gl.qm and b/src/Mod/Arch/Resources/translations/Arch_gl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index 90fd9e1e31..30fc6f2855 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -29,7 +29,7 @@ O estilo de numeración - + The type of this building O tipo desta construción @@ -114,7 +114,7 @@ A área de chan calculada para este andar - + The placement of this object A situación deste obxecto @@ -204,12 +204,12 @@ A dirección de extrusión normal deste obxecto (manter (0,0,0) para normal automática) - + The linked object O obxecto ligado - + The line width of the rendered objects A largura da liña dos obxectos renderizados @@ -504,37 +504,37 @@ Grosor do flanco - + The diameter of the bar O diámetro da barra - + The distance between the border of the beam and the first bar (concrete cover). A distancia entre o bordo da trabe e a primeira correa (cuberta de formigón). - + The distance between the border of the beam and the last bar (concrete cover). A distancia entre o bordo da trabe e a derradeira correa (cuberta de formigón). - + The amount of bars A cantidade de correas - + The spacing between the bars O espazado entre correas - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. A dirección a usar para estender as correas. Manteña (0,0,0) para a dirección automática. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. O arredondado a aplicar para o ángulo do perfil de base. Este valor multiplícase polo diámetro da barra. @@ -614,52 +614,52 @@ A folla de cálculo para imprimir os resultados - + If false, non-solids will be cut too, with possible wrong results. Se é falso, os non-sólidos serán cortados tamén, con posibles resultados errados. - + The display length of this section plane A lonxitude visualizada deste plano de corte - + The display height of this section plane A altura visualizada deste plano de corte - + The size of the arrows of this section plane O tamaño das frechas deste plano de corte - + Show the cut in the 3D view Amosar o corte na visualización 3D - + The rendering mode to use O xeito de renderización para usar - + If cut geometry is shown or not Se se amosa ou non a xeometría do corte - + If cut geometry is filled or not Se se enche ou non a xeometría do corte - + The size of the texts inside this object O tamaño dos textos dentro deste obxecto - + If checked, source objects are displayed regardless of being visible in the 3D model Se é marcada, os obxectos de orixe amósanse independentemente de seren visibles no modelo 3D @@ -1084,12 +1084,12 @@ Lista dos grosores de capa - + The line color of the projected objects Cor de liña dos obxectos proxectados - + The color of the cut faces (if turned on) Cor das caras talladas (se está activado) @@ -1169,27 +1169,27 @@ Activa e amosa a textura da vea da madeira on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Distancia total onde se colocarán as barras de reforzo. Manter 0 para usar automaticamente a xeometría do obxecto pai. - + List of placement of all the bars Lista de colocación de tódalas barras - + The structure object that hosts this rebar Obxecto de estrutura que contén esta barra de reforzo - + The custom spacing of rebar Espazo persoalizado da barra corrugada - + Shape of rebar Forma da barra @@ -1264,12 +1264,12 @@ O nivel do punto (0,0,0) deste nivel - + The shape of this object A forma desde obxecto - + The line width of this object Largura da lixa desde obxecto @@ -1364,12 +1364,12 @@ Un valor de desprazamento para mover un plano de tallada dende o punto central - + Length of a single rebar Lonxitude dunha barra de reforzo senlleira - + Total length of all rebars Lonxitude dotal de tódolos reforzos @@ -1394,22 +1394,22 @@ Se é certo, as cores dende o ficheiro ligado manteranse actualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os obxectos que deben ser considerados por este plano de corte. Baleiro significa todo o documento. - + The transparency of this object A transparencia deste obxecto - + The color of this object A cor deste obxecto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distancia entre o plano de corte mais a vista actual de corte (mantén isto nun valor baixo pero non cero) @@ -1629,12 +1629,12 @@ Descrición dos atributos IFC aínda non estando implementados - + If True, resulting views will be clipped to the section plane area. Se é Certo, os resultados das vistas serán recortados á área do plano de corte. - + If true, the color of the objects material will be used to fill cut areas. Se é verdadeiro, a cor dos obxectos materiais será usada para raiar áreas de tallada. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Facer plano de corte @@ -2262,7 +2262,7 @@ Crear estrutura - + Create Rebar Crear armazón @@ -3203,7 +3203,7 @@ Floor creation aborted. Perfil - + Please select a base face on a structural object Por favor escolme unha face base nun obxecto estrutural @@ -3213,37 +3213,37 @@ Floor creation aborted. Crear referencia externa - + Section plane settings Axustes do plano de corte - + Objects seen by this section plane: Obxectos vistos por este plano de corte: - + Section plane placement: Situación do Plano de corte: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3399,42 +3399,42 @@ Obxectos Sitio e Edificio serán removidos dende a selección. Podes trocar esas preferencias. - + Remove highlighted objects from the list above Remover obxectos destacados dende a lista de enriba - + Add selected Engadir escolma - + Add selected object(s) to the scope of this section plane Engadir obxecto(s) escolmados ao ámbito de aplicación deste plano de sección - + Rotates the plane along the X axis Rotar o plano ao longo do eixe X - + Rotates the plane along the Y axis Rotar o plano ao longo do eixe Y - + Rotates the plane along the Z axis Rotar o plano ao longo do eixe Z - + Resizes the plane to fit the objects in the list above Redimensiona o plano para que os obxectos da lista de enriba collan - + Centers the plane on the objects in the list above Centra o plano na lista de obxectos de enriba @@ -4272,12 +4272,12 @@ Podes trocar esas preferencias. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crea unha armazón de reforzo da cara escolmada dun obxecto estrutural - + Custom Rebar Barra de reforzo personalizada @@ -4350,12 +4350,12 @@ Podes trocar esas preferencias. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Crea un obxecto Plano de corte, incluíndo os obxectos escolmados diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.qm b/src/Mod/Arch/Resources/translations/Arch_hr.qm index f021eb3770..241388b726 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hr.qm and b/src/Mod/Arch/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 02c5f30707..3ce1abaf1b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -29,7 +29,7 @@ Stil numeriranja - + The type of this building Vrsta ove zgrade @@ -114,7 +114,7 @@ izracun poda i povrsine poda - + The placement of this object polozaj objekta @@ -204,12 +204,12 @@ Smjer normalnog istiskivanja objekta (zadrži (0,0,0) za automatsko normalno) - + The linked object Povezani objekt - + The line width of the rendered objects Širine crte iscrtanih objekata @@ -504,37 +504,37 @@ Debljina prirubnice - + The diameter of the bar Promjer šipke - + The distance between the border of the beam and the first bar (concrete cover). Udaljenost od ruba grede i prve (armaturne) šipke (betonski poklopac). - + The distance between the border of the beam and the last bar (concrete cover). Udaljenost od ruba nosača i zadnje (armaturne) šipke (betonski poklopac). - + The amount of bars Količina šipki - + The spacing between the bars Razmak između šipki - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Smjer kojim će se širiti šipke. Zadrži (0,0,0) za automatski smjer. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Obrubi za primjenu na kutu osnovnog profila. Ova vrijednost se množi sa promjerom šipke. @@ -614,52 +614,52 @@ Proračunska tablica za ispis rezultata na - + If false, non-solids will be cut too, with possible wrong results. Ako je netočno, ne krute tvari će se rezati također, s moguće lošim rezultatom. - + The display length of this section plane Dužina prikaza ovog djela ravni - + The display height of this section plane Visina prikaza ovog djela ravni - + The size of the arrows of this section plane Veličina strelica ovog dijela ravni - + Show the cut in the 3D view Prikaži presjek u 3D pogledu - + The rendering mode to use Mod iscrtavanja koji se koristi - + If cut geometry is shown or not Da li je geometrija rezanja prikazana ili ne - + If cut geometry is filled or not Da li je geometrija rezanja ispunjena ili ne - + The size of the texts inside this object Veličina tekstova unutar ovog objekta - + If checked, source objects are displayed regardless of being visible in the 3D model Ako je označeno, izvorni objekti prikazuju se bez obzira jesu li vidljivi u 3D modelu @@ -1084,12 +1084,12 @@ Lista debljina slojeva - + The line color of the projected objects Boja linije projiciranih objekata - + The color of the cut faces (if turned on) Boja za lice rezanja (ako je uključeno) @@ -1169,27 +1169,27 @@ Prebacuje prikazivanje tekstura zrna drva na uključeno/isključeno - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Ukupna udaljenost raspona u čelićnoj u konstrukciji. Držite 0 za automatsku veličinu. - + List of placement of all the bars Lista položaja svih šipki - + The structure object that hosts this rebar Struktura objekta koji sadrži ovu čeličnu armaturu - + The custom spacing of rebar Korisničko prilagođeni razmak čelične armature - + Shape of rebar Oblik čelične armature @@ -1264,12 +1264,12 @@ Nivo (0,0,0) točke ovog Nivoa - + The shape of this object Oblik ovog objekta - + The line width of this object Debljina linije ovog objekta @@ -1364,12 +1364,12 @@ Vrijednost pomaka za pomicanje ravnine skraćivanja od središnje točke - + Length of a single rebar Dužina (jedne) armature - + Total length of all rebars Ukupna dužina armature @@ -1394,22 +1394,22 @@ Ako je istina, boje iz povezane datoteke će biti automatski ažurirane - + The objects that must be considered by this section plane. Empty means the whole document. Objekti koji se razmatraju po dijelu ravni. Prazno znači čitav dokument. - + The transparency of this object Prozirnost ovog objekta - + The color of this object Boja ovog objekta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Udaljenost između ravnine rezanja i aktualnog pogleda rezanja (mala vrijednost ali ne nula) @@ -1629,12 +1629,12 @@ Opis IFC atributa još nije ugrađeno - + If True, resulting views will be clipped to the section plane area. Ako je točno, rezultirajući prikazi bit će izrezani na područje ravnine odjeljka. - + If true, the color of the objects material will be used to fill cut areas. Ako je istina, boja predmeta materijala upotrijebit će se za popunjavanje izrezanih područja. @@ -1961,52 +1961,66 @@ If True, double-clicking this object in the tree activates it - If True, double-clicking this object in the tree activates it + Ako je točno, dvostrukim klikom na ovaj objekt u stablu aktivira se + + An optional host object for this curtain wall - An optional host object for this curtain wall + Opcionalni domaćin objekt za ovu viseću vanjsku fasadu + + The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + Visina viseće vanjske fasade, ako se temelji na rubu + + The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + Visina profila vertikalnih mullionsa, ako se ne koristi profil + + The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + Širina profila vertikalnih mullionsa, ako se ne koristi profil + + The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + Visina profila horizontalnih mullionsa, ako se ne koristi profil + + The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + Širina profila horizontalnih mullionsa, ako se ne koristi profil An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + Neobvezna EPW datoteka za lokaciju ove web stranice. Pogledajte dokumentaciju web mjesta kako biste saznali kako je dobiti Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Prikaži dijagram wind rose ili ne. Koristi solarnu ljestvicu dijagrama. Potreban je modul Ladybug + + - + The rebar mark - The rebar mark + Oznaka čelične armature @@ -2147,7 +2161,7 @@ Pogled od - + Create Section Plane Izradi ravninu presjeka @@ -2267,7 +2281,7 @@ Izradi okvir - + Create Rebar Izgradi Građevinsko željezo @@ -3221,7 +3235,7 @@ Stvaranje zgrade prekinuto. Profil - + Please select a base face on a structural object Odaberite osnovno lice na strukturni objekt @@ -3231,37 +3245,37 @@ Stvaranje zgrade prekinuto. Stvaranje vanjske reference - + Section plane settings Postavke odsječka ravni - + Objects seen by this section plane: Objekti viđeni sa ovog djela ravni: - + Section plane placement: Položaj odsječka ravni: - + Rotate X Rotiraj X - + Rotate Y Rotiraj Y - + Rotate Z Rotiraj Z - + Resize Promjena veličine @@ -3418,42 +3432,42 @@ Parcela i Zgrada uklanjaju se iz odabira. To možete promijeniti u postavkama. - + Remove highlighted objects from the list above Ukloni istaknute objekte sa liste iznad - + Add selected Dodaj odabrano - + Add selected object(s) to the scope of this section plane Dodajte odabrane objekte u područje ovog djela ravni - + Rotates the plane along the X axis Rotiraj ravninu uzduž X osi - + Rotates the plane along the Y axis Rotiraj ravninu uzduž Y osi - + Rotates the plane along the Z axis Rotiraj ravninu uzduž Z osi - + Resizes the plane to fit the objects in the list above Promijeni veličinu ravnine radi postavljanja objekata na gornji popis - + Centers the plane on the objects in the list above Centrira ravninu na objekte na gornjem popisu @@ -3630,12 +3644,12 @@ To možete promijeniti u postavkama. Create profile - Create profile + Izradi profil Profile settings - Profile settings + Postavke profila @@ -3645,52 +3659,60 @@ To možete promijeniti u postavkama. Shapes elevation - Shapes elevation + Podizanje oblika Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Odaberite koje polje pruža podizanje oblika + + No shape found in this file - No shape found in this file + U ovoj datoteci nije pronađen oblik Shapefile module not found - Shapefile module not found + Modul Datoteka Oblika nije pronađen Error: Unable to download from: - Error: Unable to download from: + Pogreška: Preuzimanje nije moguće s: Could not download shapefile module. Aborting. - Could not download shapefile module. Aborting. + Nije moguće preuzeti modul Datoteka Oblika. Prekid. + + Shapefile module not downloaded. Aborting. - Shapefile module not downloaded. Aborting. + Datoteka Oblika modul nije učitan. Prekid. Shapefile module not found. Aborting. - Shapefile module not found. Aborting. + Datoteka Oblika modul nije pronađen. Prekid. The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + Biblioteka Datoteka Oblika može se preuzeti sa sljedećeg URL-a i instalirati u mapu makronaredbi: + + The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Python biblioteka Datoteke Oblika nije pronađena u vašem sustavu. Želite li je sada preuzeti sa <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Bit će smještena u mapi makronaredbi. + + @@ -4272,7 +4294,7 @@ To možete promijeniti u postavkama. Creates a profile object - Creates a profile object + Napravi objekt profila @@ -4291,12 +4313,12 @@ To možete promijeniti u postavkama. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Stvara šipku armature na osnovu odabranog lica od strukturnog objekta - + Custom Rebar Prilagođeno građevinsko željezo @@ -4369,12 +4391,12 @@ To možete promijeniti u postavkama. Arch_SectionPlane - + Section Plane Ravnina odjeljka - + Creates a section plane object, including the selected objects Kreira plohu presjeka, ukljućujući odabrane objekte @@ -4813,10 +4835,12 @@ To možete promijeniti u postavkama. Can be "Count" to count the objects, or property names like "Length" or "Shape.Volume" to retrieve a certain property. - The property to retrieve from each object. -Can be "Count" to count the objects, or property names -like "Length" or "Shape.Volume" to retrieve -a certain property. + Svojstvo dohvaćanja iz svakog objekta. +Može se "Brojati" za brojanje objekata ili imena svojstava +poput "Duljina" ili "Oblik.Volume" za dohvaćanje +određeno svojstvo. + + @@ -4824,15 +4848,16 @@ a certain property. (internal names, not labels), to be considered by this operation. If the list contains groups, children will be added. Leave blank to use all objects from the document - An optional semicolon (;) separated list of object names -(internal names, not labels), to be considered by this operation. -If the list contains groups, children will be added. -Leave blank to use all objects from the document + Neobvezna točka zarez (;) odvojena popisom naziva objekata +(unutarnja imena, a ne oznake) koje treba uzeti u obzir u ovoj operaciji. +Ako popis sadrži grupe, bit će dodani potomci. +Ostavite prazno da biste koristili sve predmete iz dokumenta <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>Opcionalna točka zarez (;) lista odvajanja vrijednosti :filtri vrijednosti. Dodaj! na ime svojstva, za invertiranje učinka filtara (izuzeti objekte koji se podudaraju s filtrom). Objekti čije svojstvo sadrži vrijednost će se uskladiti. Primjeri valjanih filtara (neosjetljivo na velika i mala slova):</p><p><span style=" font-weight:600;">Ime:Zid</span>- Razmatrat će samo predmete sa&quot;Zid&quot; u svom imenu (interni naziv)</p><p><span style=" font-weight:600;">!Ime:Zid</span>- Razmotrit će samo predmete kod kojih NEMA &quot;zid&quot; u svom imenu (interni naziv)</p><p><span style=" font-weight:600;">Opis:Dobitak</span>- Razmatrat će samo predmete sa &quot;dobitak&quot; u svom opisu</p><p><span style=" font-weight:600;">!Opis:Dobitak</span>- Razmotrit će samo predmete kojih NEMAJU &quot;dobitak&quot; u njihovoj oznaci</p><p><span style=" font-weight:600;">IfcTip:Zid</span>- Razmotrit će samo predmete čiji Ifc Tip je &quot;Zid&quot;</p><p><span style=" font-weight:600;">!Oznaka:Zid</span> - Razmotrit će samo predmete čija oznaka NIJE &quot;Zid&quot;</p><p>Ako ovo polje ostavite prazno, filtriranje se ne primjenjuje +</p></body></html> @@ -5829,7 +5854,9 @@ Gradijent veličine lokalne mreže h (x) vezan je | Δh (x) | ≤ 1 / vrijednost Allow quadrilateral faces - Allow quadrilateral faces + Dopustite četverokutna lica + + @@ -6072,31 +6099,31 @@ Svojstva objekta FreeCAD-a Export type - Export type + Tip izvoza Standard model - Standard model + Standardni model Structural analysis - Structural analysis + Analiza strukture Standard + structural - Standard + structural + Standardno + strukturno Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, an additional calculation is done to join coplanar facets. - Curved shapes that cannot be represented as curves in IFC -are decomposed into flat facets. -If this is checked, an additional calculation is done to join coplanar facets. + Zakrivljeni oblici koji se ne mogu prikazati kao krivulje u IFC-u +raspadaju se u ravne plohe. +Ako je to potvrđeno, radi se dodatni izračun za pridruživanje koplanarnim plohama. @@ -6104,10 +6131,12 @@ If this is checked, an additional calculation is done to join coplanar facets. - The type of objects that you wish to export: -- Standard model: solid objects. -- Structural analysis: wireframe model for structural calculations. -- Standard + structural: both types of models. + Vrsta objekata koje želite izvesti: +- Standardni model: kruti predmeti. +- Strukturna analiza: žičani okvir za strukturne proračune. +- Standard + strukturni: obje vrste modela. + + @@ -6117,12 +6146,13 @@ Note that IFC files are ALWAYS written in metric units; imperial units are only a conversion factor applied on top of them. However, some BIM applications will use this factor to choose which unit to work with when opening the file. - The units you want your IFC file to be exported to. + Jedinice u koje želite izvesti svoju IFC datoteku. -Note that IFC files are ALWAYS written in metric units; imperial units -are only a conversion factor applied on top of them. -However, some BIM applications will use this factor to choose which -unit to work with when opening the file. +Imajte na umu da su IFC datoteke UVIJEK napisane u mjernim jedinicama; zadane jedinice su samo faktor konverzije primijenjen na vrhu njih. +Međutim, neke BIM aplikacije koristit će ovaj faktor za odabir +jedinice s kojom treba raditi prilikom otvaranja datoteke. + + @@ -6134,19 +6164,20 @@ for example, 3 if you have a 4-core CPU. Set it to 1 to use multicore mode in single-core mode; this is safer if you start getting crashes when you set multiple cores. - EXPERIMENTAL -The number of cores to use in multicore mode. -Keep 0 to disable multicore mode. -The maximum value should be your number of cores minus 1, -for example, 3 if you have a 4-core CPU. + EKSPERIMENTALNI DIO +Broj jezgara koje se koriste u višekutnom načinu. +Držite 0 da biste onemogućili višekutni način rada. +Maksimalna vrijednost treba biti vaš broj jezgara minus 1, +na primjer, 3 ako imate 4-jezgreni CPU. -Set it to 1 to use multicore mode in single-core mode; this is safer -if you start getting crashes when you set multiple cores. +Postavite ga na 1 za upotrebu multicore načina u single-core načinu; to je sigurnije ako pokrenete rušenje kod postavljanja više jezgara. Number of cores to use (experimental) - Number of cores to use (experimental) + Broj jezgara koje se koriste (eksperimentalno) + + @@ -6154,15 +6185,16 @@ if you start getting crashes when you set multiple cores. objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Ako je ova opcija potvrđena, zadane postavke "Projekt", "Web mjesto", "Zgrada" i "Etaže" objekti koji se obično nalaze u IFC datoteci se ne uvoze, a svi objekti +umjesto toga smješteni su u "Grupu". +"Zgrade" i "Etaže" i dalje se uvoze ako ih ima više. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + Zamijenite "Projekt", "Mjesto", "Zgrada" i "Etaža" s "Grupa" + + diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index b90d88b040..7a3180ba81 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 49df5ff736..c3915ac475 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -29,7 +29,7 @@ Számozási stílus - + The type of this building Ennek az épületnek a típusa @@ -114,7 +114,7 @@ Ennek a szint területnek a számított alapterülete - + The placement of this object Ennek az objektumnak az elhelyezése @@ -204,12 +204,12 @@ Ennek az objektumnak a normál kihúzás iránya (automatikus normál (0,0,0) megtartása) - + The linked object A kapcsolt objektum - + The line width of the rendered objects A megjelenített objektumok vonalvastagsága @@ -504,37 +504,37 @@ Perem vastagsága - + The diameter of the bar Sáv átmérője - + The distance between the border of the beam and the first bar (concrete cover). A gerenda szélének és az első gerenda (beton fedlap) közti távolság. - + The distance between the border of the beam and the last bar (concrete cover). A gerenda határának és az utolsó sáv (beton fedlap) közötti távolság. - + The amount of bars Sávok mennyisége - + The spacing between the bars A sávok közötti térköz - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Irány a sávok szórásához. Tartsa (0,0,0) az automatikus irányhoz. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Az alap felület profil szögéhez használ kívánt lekerekítés. Ezt az értéket megszorozza a a sáv átmérőjével. @@ -614,52 +614,52 @@ A táblázat az eredmények nyomtatásához - + If false, non-solids will be cut too, with possible wrong results. Ha hamis, nem szilárd testeket is elvág, lehetséges rossz eredménnyel. - + The display length of this section plane A metszősík megjelenítési hossza - + The display height of this section plane A metszősík megjelenítési magassága - + The size of the arrows of this section plane Metszősík nyilainak a nagysága - + Show the cut in the 3D view A vágás 3D-s nézetének megjelenítése - + The rendering mode to use A használandó igazító mód - + If cut geometry is shown or not Ha a levágott geometria megjelenik vagy sem - + If cut geometry is filled or not Ha a levágott geometria kitöltött vagy sem - + The size of the texts inside this object A szöveg vastagsága ebben az objektumban - + If checked, source objects are displayed regardless of being visible in the 3D model Ha be van jelölve, a forrásobjektumok megjelenik függetlenül attól, hogy látható legyen, a 3D-s modellben @@ -1084,12 +1084,12 @@ A réteg vastagságok listája - + The line color of the projected objects A vetített objektumok vonal színe - + The color of the cut faces (if turned on) Vágott felületek színe (ha be van kapcsolva) @@ -1169,27 +1169,27 @@ Fa illesztés textúra kijelzésének be/ki kapcsolása - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Az betonacél feletti kiforgatáshoz a teljes távolság. Hagyja meg a 0 értéket az automatikushoz a kiszolgáló alakzat méretének használatához. - + List of placement of all the bars Az összes sáv elhelyezésének listája - + The structure object that hosts this rebar Ennek a betonacélnak a hordozó szerkezeti objektuma - + The custom spacing of rebar Betonacél egyedi térközzel - + Shape of rebar Betonacél alakja @@ -1264,12 +1264,12 @@ Ennek a szintnek a (0,0,0) pont szintje - + The shape of this object Ennek a tárgynak az alakja - + The line width of this object Ennek a tárgynak a vonalvastagsága @@ -1364,12 +1364,12 @@ Egy eltolás érték a vágott sík elmozdulásához a középponttól - + Length of a single rebar Egyetlen betonacél hossza - + Total length of all rebars Összes betonacél teljes hossza @@ -1394,22 +1394,22 @@ Ha az érték igaz, a csatolt fájlból felhasznált szín folyamatosan frissül - + The objects that must be considered by this section plane. Empty means the whole document. Objektum a metszés nézethez. Üresen hagyva az egész dokumentumot jelenti. - + The transparency of this object Ennek a tárgynak az átláthatósága - + The color of this object Ennek a tárgynak a színe - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A tényleges vágás és a kivágási sík közötti távolság (hagyja nagyon kis méretűre, de ne legyen nulla) @@ -1629,12 +1629,12 @@ Az IFC-attribútumok leírása még nincs megvalósítva - + If True, resulting views will be clipped to the section plane area. Ha az érték Igaz, a rendszer az eredményül kapott nézeteket a metszősík területére levágja. - + If true, the color of the objects material will be used to fill cut areas. Az elemhez tartozó anyag színének használata metszeti kitöltésként. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Nézete a - + Create Section Plane Szakasz sík létrehozása @@ -2262,7 +2262,7 @@ Keret létrehozása - + Create Rebar Új betonacél létrehozása @@ -3216,7 +3216,7 @@ Padló létrehozása megszakítva. Profil - + Please select a base face on a structural object Válasszon egy alap nézetet a tárgy szerkezetén @@ -3226,37 +3226,37 @@ Padló létrehozása megszakítva. Külső hivatkozás készítése - + Section plane settings Metszősík beállítások - + Objects seen by this section plane: Metszősík által látható tárgyak: - + Section plane placement: Metszősík elhelyezése: - + Rotate X Forgatás X - + Rotate Y Forgatás Y - + Rotate Z Forgatás Z - + Resize Átméretezés @@ -3413,42 +3413,42 @@ Telek és épület objektumok el lesznek távolítva a kijelölésből. Módosíthatja ezt a beállításokban. - + Remove highlighted objects from the list above Kijelölt elemek eltávolítása a fenti listából - + Add selected Kiválasztott hozzáadása - + Add selected object(s) to the scope of this section plane Kijelölt elem(ek) hozzáadása a metszősík hatóköréhez - + Rotates the plane along the X axis Sík forgatása az X tengely körül - + Rotates the plane along the Y axis Sík forgatása az Y tengely körül - + Rotates the plane along the Z axis Sík forgatása a Z tengely körül - + Resizes the plane to fit the objects in the list above Sík átméretezése a fenti listában szereplő elemekre - + Centers the plane on the objects in the list above Sík középpontja a fenti listában szereplő elemeken @@ -4286,12 +4286,12 @@ Módosíthatja ezt a beállításokban. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Létrehoz egy betonacél megerősítést a strukturált tárgy kijelölt felületéről - + Custom Rebar Egyedi betonacél @@ -4364,12 +4364,12 @@ Módosíthatja ezt a beállításokban. Arch_SectionPlane - + Section Plane Rész sík - + Creates a section plane object, including the selected objects Létrehoz egy szakasz sík objektumot, beleértve a kijelölt objektumokat diff --git a/src/Mod/Arch/Resources/translations/Arch_id.qm b/src/Mod/Arch/Resources/translations/Arch_id.qm index ccd4f88cf2..80dacd9d42 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_id.qm and b/src/Mod/Arch/Resources/translations/Arch_id.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index 5c7c79b1ee..d2252854af 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -29,7 +29,7 @@ Gaya penomoran - + The type of this building Jenis bangunan ini @@ -114,7 +114,7 @@ Daerah dihitung lantai lantai ini - + The placement of this object Penempatan objek ini @@ -204,12 +204,12 @@ Arah normal ekstrusi objek ini (tetap (0,0,0) untuk otomatis normal) - + The linked object Objek terkait - + The line width of the rendered objects Lebar garis benda-benda yang diberikan @@ -504,37 +504,37 @@ Ketebalan pinggiran roda - + The diameter of the bar Garis tengah batang - + The distance between the border of the beam and the first bar (concrete cover). Jarak antara pinggiran balok dan tiang pertama (penutup beton). - + The distance between the border of the beam and the last bar (concrete cover). Jarak antara pinggiran balok dan tiang terakhir (penutup beton). - + The amount of bars Jumlah tiang - + The spacing between the bars Jarak antar tiang - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Arah yang digunakan untuk menyebarkan Batang - Bars. Gunakan (0,0,0) untuk arah otomatis. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Isian nilai untuk diterapkan terhadap sudut profil dasar. Nilai ini dikalikan dengan diameter (garis tengah) batang. @@ -614,52 +614,52 @@ Spreadsheet untu mencetak hasil - + If false, non-solids will be cut too, with possible wrong results. Jika salah, non-padat akan dipotong juga, dengan kemungkinan hasil yang salah. - + The display length of this section plane Panjang tampilan bidang bagian ini - + The display height of this section plane Tinggi tampilan bidang bagian ini - + The size of the arrows of this section plane Ukuran panah bidang bagian ini - + Show the cut in the 3D view Menunjukkan potongan dalam tampilan 3D - + The rendering mode to use Mode penyiapan yang dipakai - + If cut geometry is shown or not Jika potongan geometri digunakan atau tidak - + If cut geometry is filled or not Jika potongan geometri diisi atau tidak - + The size of the texts inside this object Ukuran teks didalam objek ini - + If checked, source objects are displayed regardless of being visible in the 3D model Kalau dicentang, sumber objek ditampilkan tanpa memperhatikan untuk menjadi tampil dalam model 3D @@ -1084,12 +1084,12 @@ Daftar dari lapisan ketebalan - + The line color of the projected objects Warna garis benda-benda yang diproyeksikan - + The color of the cut faces (if turned on) Warna permukaan potong (jika diaktifkan) @@ -1169,27 +1169,27 @@ Mengubah tampilan tekstur / onggokan butiran kayu - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Jarak total untuk membentang di atas tulangan. Jauhkan 0 untuk secara otomatis menggunakan ukuran bentuk host. - + List of placement of all the bars Daftar penempatan semua bar - + The structure object that hosts this rebar Struktur objek yang host rebar ini - + The custom spacing of rebar Jarak khusus dari rebar - + Shape of rebar Bentuk rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Panjang satu tulangan - + Total length of all rebars Panjang total semua tulangan @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Pemandangan dari - + Create Section Plane Membuat bidang bagian @@ -2262,7 +2262,7 @@ Membuat Frame - + Create Rebar Membuat Rebar @@ -3206,7 +3206,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3216,37 +3216,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3403,42 +3403,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Tambahkan yang dipilih - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4276,12 +4276,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Membuat bar Penguat dari wajah yang dipilih dari suatu benda struktural - + Custom Rebar Custom Rebar @@ -4354,12 +4354,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Bagian pesawat - + Creates a section plane object, including the selected objects Membuat bagian objek pesawat, termasuk objek yang dipilih diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index 91afd10aea..cf997ddc2f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 179d67a43d..a5a15e002f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -29,7 +29,7 @@ Lo stile di numerazione - + The type of this building Tipo di edificio @@ -114,7 +114,7 @@ La superficie del piano calcolata per questo piano - + The placement of this object Il posizionamento di questo oggetto @@ -204,12 +204,12 @@ La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The linked object L'oggetto collegato - + The line width of the rendered objects La larghezza della linea degli oggetti resi @@ -504,37 +504,37 @@ Spessore della flangia - + The diameter of the bar Il diametro della barra - + The distance between the border of the beam and the first bar (concrete cover). La distanza tra i bordi della trave e la prima barra (copertura del cemento). - + The distance between the border of the beam and the last bar (concrete cover). La distanza tra il bordo della trave e l'ultima barra (copriferro). - + The amount of bars La quantità di barre - + The spacing between the bars La spaziatura tra le barre - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. La direzione di utilizzare per estendere le barre. Mantenere (0,0,0) per direzione automatica. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. La raggiatura da applicare all'angolo del profilo base. Questo valore è moltiplicato per il diametro della barra. @@ -614,52 +614,52 @@ Il foglio di calcolo dove stampare i risultati - + If false, non-solids will be cut too, with possible wrong results. Se false, verranno tagliati anche i non solidi, con possibili risultati sbagliati. - + The display length of this section plane La lunghezza di visualizzazione di questo piano di sezione - + The display height of this section plane La larghezza di visualizzazione di questo piano di sezione - + The size of the arrows of this section plane La dimensione delle frecce di questo piano di sezione - + Show the cut in the 3D view Visualizza la sezione nella vista 3D - + The rendering mode to use La modalità di rendering da utilizzare - + If cut geometry is shown or not Se la geometria di taglio è visualizzata o meno - + If cut geometry is filled or not Se la geometria deve essere riempita o non - + The size of the texts inside this object La dimensione dei testi all'interno di questo oggetto - + If checked, source objects are displayed regardless of being visible in the 3D model Se selezionata, gli oggetti di origine vengono visualizzati indipendentemente dall'essere visibili nel modello 3D @@ -1084,12 +1084,12 @@ L'elenco degli spessori degli strati - + The line color of the projected objects Il colore della linea degli oggetti proiettati - + The color of the cut faces (if turned on) Il colore delle facce tagliate (se attivato) @@ -1169,27 +1169,27 @@ Attiva o disattiva la visualizzazione della texture della venatura del legno - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. La distanza totale su cui distribuire l'armatura. Tenere 0 per utilizzare automaticamente la dimensione della forma ospite. - + List of placement of all the bars Lista di piazzamento di tutte le barre - + The structure object that hosts this rebar L'oggetto struttura che ospita questa armatura - + The custom spacing of rebar La spaziatura personalizzata dell'armatura - + Shape of rebar Forma dell'armatura @@ -1264,12 +1264,12 @@ Il livello del punto (0, 0,0) di questo livello - + The shape of this object La forma di questo oggetto - + The line width of this object Lo spessore della linea di questo oggetto @@ -1364,12 +1364,12 @@ Un valore di offset per spostare il piano di taglio dal punto centrale - + Length of a single rebar Lunghezza di una singola barra - + Total length of all rebars Lunghezza totale di tutte le barre @@ -1394,22 +1394,22 @@ Se true, i colori dal file collegato verranno mantenuti aggiornati - + The objects that must be considered by this section plane. Empty means the whole document. Gli oggetti che devono essere considerati da questo piano di sezione. Vuoto significa tutto il documento. - + The transparency of this object La trasparenza di questo oggetto - + The color of this object Il colore di questo oggetto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distanza tra il piano di taglio e la vista di taglio attuale (tenere questo un valore molto piccolo ma non zero) @@ -1629,12 +1629,12 @@ La descrizione degli attributi IFC non è ancora implementata - + If True, resulting views will be clipped to the section plane area. Se vero, le visualizzazioni risultanti verranno ritagliate nell'area di piano della sezione. - + If true, the color of the objects material will be used to fill cut areas. Se vero, il colore del materiale degli oggetti verrà utilizzato per riempire le aree tagliate. @@ -1999,9 +1999,9 @@ Mostra o nasconde il diagramma della rosa dei venti. Usa la scala del grafico solare. Richiede il modulo Ladybug - + The rebar mark - The rebar mark + Il segno dell'armatura @@ -2142,9 +2142,9 @@ Vista di - + Create Section Plane - Crea Piano di Sezione + Crea Piano di sezione @@ -2262,7 +2262,7 @@ Crea Telaio - + Create Rebar Crea Armatura @@ -3213,7 +3213,7 @@ Floor creation aborted. Profilo - + Please select a base face on a structural object Selezionare una faccia di base su un oggetto struttura @@ -3223,37 +3223,37 @@ Floor creation aborted. Crea riferimenti esterni - + Section plane settings Impostazioni del piano di sezione - + Objects seen by this section plane: Oggetti visti in questo piano di sezione: - + Section plane placement: Posizione del piano di sezione: - + Rotate X Rotazione X - + Rotate Y Rotazione Y - + Rotate Z Rotazione Z - + Resize Ridimensiona @@ -3407,42 +3407,42 @@ Gli oggetti Sito e Edificio saranno rimossi dalla selezione. È possibile modificare questa impostazione nelle preferenze. - + Remove highlighted objects from the list above Rimuovi gli oggetti evidenziati dalla lista precedente - + Add selected Aggiungi la selezione - + Add selected object(s) to the scope of this section plane Aggiungi oggetto(i) selezionato(i) allo spazio di questo piano sezione - + Rotates the plane along the X axis Ruota il piano lungo l'asse X - + Rotates the plane along the Y axis Ruota il piano lungo l'asse Y - + Rotates the plane along the Z axis Ruota il piano lungo l'asse Z - + Resizes the plane to fit the objects in the list above Ridimensiona il piano per adattare gli oggetti nella lista precedente - + Centers the plane on the objects in the list above Centra il piano sugli oggetti nella lista precedente @@ -3679,7 +3679,7 @@ Gli oggetti Sito e Edificio saranno rimossi dalla selezione. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + In questo sistema la libreria python shapefile non è stata trovata. Vuoi scaricarla subito da <a href="https://github.com/GeospatialPython/pyshp">https://github. om/GeospatialPython/pyshp</a>? Sarà posizionata nella cartella delle macro. @@ -4076,7 +4076,7 @@ Gli oggetti Sito e Edificio saranno rimossi dalla selezione. When in edge midpoint mode, if this grid must reorient its children along edge normals or not - Se questa griglia, quando è in modalità punto medio del bordo, deve riorientare i suoi figli lungo le normali al bordo o no + Se questa griglia, quando è in modalità punto medio del bordo, deve riposizionare i suoi figli lungo le normali al bordo o no @@ -4280,12 +4280,12 @@ Gli oggetti Sito e Edificio saranno rimossi dalla selezione. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra di rinforzo dalla faccia selezionata di un oggetto strutturale - + Custom Rebar Armatura personalizzata @@ -4358,12 +4358,12 @@ Gli oggetti Sito e Edificio saranno rimossi dalla selezione. Arch_SectionPlane - + Section Plane Piano di sezione - + Creates a section plane object, including the selected objects Crea un oggetto piano di sezione che comprende gli oggetti selezionati @@ -6093,12 +6093,7 @@ Note that IFC files are ALWAYS written in metric units; imperial units are only a conversion factor applied on top of them. However, some BIM applications will use this factor to choose which unit to work with when opening the file. - The units you want your IFC file to be exported to. - -Note that IFC files are ALWAYS written in metric units; imperial units -are only a conversion factor applied on top of them. -However, some BIM applications will use this factor to choose which -unit to work with when opening the file. + Le unità in cui si desidera esportare il file IFC. Si noti che i file IFC sono SEMPRE scritti in unità metriche. Le unità imperiali sono solo un fattore di conversione applicato su di esse. Ma alcune applicazioni BIM utilizzano questo fattore all'apertura del file per scegliere con quale unità lavorare. @@ -6130,10 +6125,7 @@ se si ottengono dei crash quando si impostano più core. objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Se questa opzione è selezionata, gli oggetti Progetto, Sito, Edificio e Piano predefiniti che normalmente si trovano in un file IFC non vengono importati e tutti gli oggetti vengono inseriti in un Gruppo. Gli edifici e i piani vengono comunque importati se ce n'è più di uno. diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.qm b/src/Mod/Arch/Resources/translations/Arch_ja.qm index 3404f5c353..ab633c4f74 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ja.qm and b/src/Mod/Arch/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 7ea77f2573..b498e700e7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -29,7 +29,7 @@ 番号付けのスタイル - + The type of this building この建物の種類 @@ -114,7 +114,7 @@ このフロアの床面積の計算 - + The placement of this object このオブジェクトの配置 @@ -204,12 +204,12 @@ このオブジェクトの法線押し出し方向（法線自動設定を行う場合は（0,0,0）のままにしてください） - + The linked object リンクされたオブジェクト - + The line width of the rendered objects 描画オブジェクトの線の幅 @@ -504,37 +504,37 @@ フランジの厚み - + The diameter of the bar バーの直径 - + The distance between the border of the beam and the first bar (concrete cover). 梁の縁と最初のバー（コンクリートカバー）の間の距離 - + The distance between the border of the beam and the last bar (concrete cover). 梁の縁と最後のバー（コンクリートカバー）の間の距離 - + The amount of bars バーの総数 - + The spacing between the bars バーの間隔 - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. バーを広げるときに使用する方向。自動設定する場合は (0,0,0) としてください。 - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. ベースプロファイルの角に適用されるフィレット。この値にはバーの直径が乗じられます。 @@ -614,52 +614,52 @@ 結果出力先のスプレッドシート - + If false, non-solids will be cut too, with possible wrong results. False の場合、非ソリッドも切断され、不正な結果となる可能性があります。 - + The display length of this section plane この断面平面の表示長さ - + The display height of this section plane この断面平面の表示高さ - + The size of the arrows of this section plane この断面平面の矢印のサイズ - + Show the cut in the 3D view 3Dビューでカットを表示 - + The rendering mode to use 使用するレンダリングモード - + If cut geometry is shown or not カット・ジオメトリーを表示するかどうか - + If cut geometry is filled or not カット・ジオメトリーを塗りつぶすかどうか - + The size of the texts inside this object このオブジェクト内部のテキストの幅 - + If checked, source objects are displayed regardless of being visible in the 3D model チェックされている場合、ソースオブジェクトが3Dモデル内で表示されているかどうかに関わらず表示されます。 @@ -1084,12 +1084,12 @@ レイヤー厚みのリスト - + The line color of the projected objects 投影オブジェクトの線の色 - + The color of the cut faces (if turned on) カット面の色（有効な場合） @@ -1169,27 +1169,27 @@ 木目テクスチャ表示のオン/オフを切り替え - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. 鉄筋が覆う長さの合計距離。ホスト形状のサイズを自動で使用する場合は0のままにしてください。 - + List of placement of all the bars すべてのバーの配置のリスト - + The structure object that hosts this rebar この鉄筋を持つ構造オブジェクト - + The custom spacing of rebar 鉄筋のユーザー設定間隔 - + Shape of rebar 鉄筋の形状 @@ -1264,12 +1264,12 @@ このレベルの (0,0,0) 点レベル - + The shape of this object このオブジェクトの形 - + The line width of this object オブジェクトの線幅 @@ -1364,12 +1364,12 @@ このオフセット値は、中心点から断面まで（を、どれくらい離すか）の距離です。 - + Length of a single rebar ひとつの鉄筋の長さ - + Total length of all rebars すべての鉄筋の合計長さ @@ -1394,22 +1394,22 @@ ここをTrueにした場合に、リンクしているファイルの色は更新された状態になります - + The objects that must be considered by this section plane. Empty means the whole document. この切断面の対象となるオブジェクト。空はドキュメント全体が対象。 - + The transparency of this object オブジェクトの透過度 - + The color of this object このオブジェクトの色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切断面と実際のビュー切断面の間の距離（ゼロでない非常に小さな値を設定してください） @@ -1629,12 +1629,12 @@ IFC属性の説明はまだ実装されていません - + If True, resulting views will be clipped to the section plane area. ここがTrue の場合、結果ビューは断面平面エリアでクリップされます。 - + If true, the color of the objects material will be used to fill cut areas. ここがtrue の場合、オブジェクト素材の色がカット領域の塗りつぶしに用いられます。 @@ -1836,7 +1836,7 @@ The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + このオブジェクトで使用される垂直方向の参照は、垂直／水平の方向を推定します。それには帳壁をほぼ垂直方向に近づけておきます。 @@ -1941,17 +1941,17 @@ This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + これは Width 属性をオーバーライドして、壁の各セグメントの幅を設定します。Base オブジェクトの幅の情報がgetWidths() メソッドによって決定される場合は無視されます。 (1 番目の値は壁の 1 番目のセグメントの 'Width' 属性を上書きします。もし値が0（零） の場合、'OverrideWidth' の 1 番目の値に従います) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + これにより、壁の各セグメントのAlign 属性をAlign に設定します。 Base オブジェクトのアライメント情報をgetAligns() メソッドによって決定される場合は無視します。 (1 番目の値は壁の 1 番目のセグメントの 'Align' 属性を上書きします; 値が 'Left, Right, Center' でない場合、'OverrideAlign' の1番目の値に従います) The area of this wall as a simple Height * Length calculation - The area of this wall as a simple Height * Length calculation + この壁の面積 (area) は、単純に「高さ×長さ」の計算となります @@ -1961,7 +1961,7 @@ An optional host object for this curtain wall - An optional host object for this curtain wall + この帳壁におけるオプションのホストオブジェクト @@ -1999,7 +1999,7 @@ 風配図を表示するか否か。 太陽線図の尺度が用いられます。これには Ladybugモジュールを必要とします。 - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ 表示 - + Create Section Plane 断面平面を作成 @@ -2262,7 +2262,7 @@ 軸組の作成 - + Create Rebar 異形鉄筋を作成 @@ -3217,7 +3217,7 @@ Floor creation aborted. プロファイル - + Please select a base face on a structural object 構造オブジェクト上から基準面を選択してください @@ -3227,37 +3227,37 @@ Floor creation aborted. 外部参照を作成 - + Section plane settings - Section plane settings + 断面平面の設定 - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X X軸で回転 - + Rotate Y Y軸で回転 - + Rotate Z Z軸で回転 - + Resize リサイズ @@ -3411,42 +3411,42 @@ You can change that in the preferences. この動作はユーザー設定から変更できます。 - + Remove highlighted objects from the list above リスト上からハイライトしたオブジェクトを削除します - + Add selected 選択追加 - + Add selected object(s) to the scope of this section plane 選択したオブジェクト(複数可) をこの断面平面のスコープに追加 - + Rotates the plane along the X axis X軸に沿って平面を回転 - + Rotates the plane along the Y axis Y軸に沿って平面を回転 - + Rotates the plane along the Z axis Z軸に沿って平面を回転 - + Resizes the plane to fit the objects in the list above リスト上のオブジェクトがフィットするように平面のサイズを変更します - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3473,7 +3473,7 @@ You can change that in the preferences. Drawing mode - Drawing mode + ドローイング・モード @@ -3558,7 +3558,7 @@ You can change that in the preferences. Auto include in host object - Auto include in host object + ホストオブジェクトへ自動的に含める @@ -3573,7 +3573,7 @@ You can change that in the preferences. Please select only one base object or none - Please select only one base object or none + ベースオブジェクトを1つだけ選択するか、何も選択しないでください。 @@ -3588,7 +3588,7 @@ You can change that in the preferences. depends on the object - depends on the object + オブジェクトによって異なる @@ -3598,7 +3598,7 @@ You can change that in the preferences. Unable to recognize that file type - Unable to recognize that file type + そのファイルの種類を認識できません @@ -3781,7 +3781,7 @@ You can change that in the preferences. Opens a browser dialog to choose a class from a BIM standard - Opens a browser dialog to choose a class from a BIM standard + ブラウザダイアログを開き、BIM標準からクラスを選択します。 @@ -3947,7 +3947,7 @@ You can change that in the preferences. Creates a curtain wall object from selected line or from scratch - Creates a curtain wall object from selected line or from scratch + 選択した線またはスクラッチから帳壁ブジェクトを作成 @@ -3965,12 +3965,12 @@ You can change that in the preferences. Cut with a line - Cut with a line + 平面で切断 Cut an object with a line with normal workplane - Cut an object with a line with normal workplane + 通常のワークプレーンを持つ線でオブジェクトを切断 @@ -4009,7 +4009,7 @@ You can change that in the preferences. Creates a Building Part object that represents a level, including selected objects - Creates a Building Part object that represents a level, including selected objects + 選択したオブジェクトを含むレベルを代表するビルディング部品のオブジェクトを作成します。 @@ -4265,7 +4265,7 @@ You can change that in the preferences. Creates a profile object - Creates a profile object + プロファイル・オブジェクトを作成 @@ -4278,18 +4278,18 @@ You can change that in the preferences. Creates a project entity aggregating the selected sites. - Creates a project entity aggregating the selected sites. + 選択したサイトを集約しているプロジェクト・エンティティーを作成します。 Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object 構造オブジェクトの選択した面から異形鉄筋を作成します - + Custom Rebar ユーザー設定による鉄筋 @@ -4362,12 +4362,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 断面 - + Creates a section plane object, including the selected objects 選択されたオブジェクトを含む断面オブジェクトを作成します @@ -4721,7 +4721,7 @@ You can change that in the preferences. Leave this empty to generate one at export - Leave this empty to generate one at export + ここを空欄のままにしておくと、エクスポートする都度に生成されます @@ -4761,7 +4761,7 @@ You can change that in the preferences. If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + ここを有効にすると、関連するスプレッドシートに含められる結果が、スケジュールオブジェクトと共に保持されるようになります @@ -4771,7 +4771,7 @@ You can change that in the preferences. If this is turned on, additional lines will be filled with each object considered. If not, only the totals. - If this is turned on, additional lines will be filled with each object considered. If not, only the totals. + ここをオンにすると、追加の行は各オブジェクトで満されると見なされます。そうでない場合は、合計のみです。 @@ -5673,7 +5673,7 @@ Leave blank to use all objects from the document The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + IFCバージョンによっては、サポートされている属性および製品が変わります @@ -5723,7 +5723,7 @@ Leave blank to use all objects from the document Import full FreeCAD parametric definitions if available - Import full FreeCAD parametric definitions if available + 利用可能な場合は、完全な FreeCAD パラメトリック定義をインポート @@ -5831,9 +5831,7 @@ Use this to force all objects to be exported as BREP geometry. When exporting objects without unique ID (UID), the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported. This leads to smaller differences between file versions. - When exporting objects without unique ID (UID), the generated UID -will be stored inside the FreeCAD object for reuse next time that object -is exported. This leads to smaller differences between file versions. + 一意のID (UID) の無いオブジェクトをエクスポートする場合、生成されたUIDがFreeCADオブジェクトの内部に保存され、そのオブジェクトを次回エクスポートする場合に再使用されます。これによってバージョン間の差分を小さくできます。 @@ -5912,7 +5910,7 @@ However, at FreeCAD, we believe having a building should not be mandatory, and t Add default building if one is not found in the document (no standard) - Add default building if one is not found in the document (no standard) + ドキュメントに未記載の場合は、既定のビルディングを付加します。(標準ではない) @@ -6015,7 +6013,7 @@ they will be treated as one. IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. - IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. + IFCファイルには、妥当でなかったり非ソリッドのジオメトリーが含まれていることがあります。このオプションにチェックが入っている場合、妥当性に関係なくすべてのジオメトリーがインポートされます。 @@ -6038,8 +6036,7 @@ This will slow down the import, but one can watch the import. Creates a full parametric model on import using stored FreeCAD object properties - Creates a full parametric model on import using stored -FreeCAD object properties + インポート時に読み込まれたFreeCADオブジェクトのプロパティを使用して、完全なパラメトリックモデルを作成します diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.qm b/src/Mod/Arch/Resources/translations/Arch_kab.qm index 78413870a7..bfbc9d7d99 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_kab.qm and b/src/Mod/Arch/Resources/translations/Arch_kab.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.ts b/src/Mod/Arch/Resources/translations/Arch_kab.ts index e2bbf2c821..f00c3ede4b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_kab.ts +++ b/src/Mod/Arch/Resources/translations/Arch_kab.ts @@ -29,7 +29,7 @@ Aɣanib n wuṭṭunen - + The type of this building The type of this building @@ -114,7 +114,7 @@ The computed floor area of this floor - + The placement of this object The placement of this object @@ -204,12 +204,12 @@ The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Timeẓri n - + Create Section Plane Create Section Plane @@ -2262,7 +2262,7 @@ Create Frame - + Create Rebar Create Rebar @@ -3216,7 +3216,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.qm b/src/Mod/Arch/Resources/translations/Arch_ko.qm index 11c11f0ee4..ef55c489cb 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ko.qm and b/src/Mod/Arch/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index c086843d2b..577f0cecdb 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -29,7 +29,7 @@ 번호 매기기 스타일 - + The type of this building 건물의 종류 @@ -114,7 +114,7 @@ 이 층의 계산된 바닥 면적 - + The placement of this object 이 오브젝트의 배치 @@ -136,80 +136,80 @@ Crossing point of the path on the profile. - Crossing point of the path on the profile. + 프로파일에 있는 경로에 교차점이 있습니다. The rotation of the profile around its extrusion axis - The rotation of the profile around its extrusion axis + 돌출 축 주위의 종단 회전 The length of this element, if not based on a profile - The length of this element, if not based on a profile + 프로파일에서 지원하지 않는 경우, 요소의 폭임. The width of this element, if not based on a profile - The width of this element, if not based on a profile + 프로파일에서 지원하지 않는 경우, 요소의 길이임. The thickness or extrusion depth of this element - The thickness or extrusion depth of this element + 요소의 두께 또는 돌출 깊이 The number of sheets to use - The number of sheets to use + 사용할 시트 수 The offset between this panel and its baseline - The offset between this panel and its baseline + 이 패널과 기준선 사이의 오프셋 The length of waves for corrugated elements - The length of waves for corrugated elements + 골판 원소의 파장 길이 The height of waves for corrugated elements - The height of waves for corrugated elements + 골판 원소의 파장 길이 The direction of waves for corrugated elements - The direction of waves for corrugated elements + 골판 원소의 파장 길이 The type of waves for corrugated elements - The type of waves for corrugated elements + 골판 원소의 파장 유형 The area of this panel - The area of this panel + 패널 면적 The facemaker type to use to build the profile of this object - The facemaker type to use to build the profile of this object + 이 객체의 프로파일을 작성하는 데 사용할 페이스메이커 유형 The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + 객체의 일반적인 돌출 방향(자동의 경우 (0,0,0)를 유지) - + The linked object 연결된 개체 - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ 플랜지 두께 - + The diameter of the bar 막대 지름 - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ 보기 - + Create Section Plane 단면 평면을 만들기 @@ -2262,7 +2262,7 @@ 프레임 생성 - + Create Rebar Create Rebar @@ -3216,7 +3216,7 @@ Floor creation aborted. 프로필 - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings 단면 설정 - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 단면 - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.qm b/src/Mod/Arch/Resources/translations/Arch_lt.qm index 4c6b4361df..73b3eb5ae7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_lt.qm and b/src/Mod/Arch/Resources/translations/Arch_lt.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.ts b/src/Mod/Arch/Resources/translations/Arch_lt.ts index 7488b3b1b2..96846a4af0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_lt.ts +++ b/src/Mod/Arch/Resources/translations/Arch_lt.ts @@ -29,7 +29,7 @@ Numeravimo stilius - + The type of this building Šio pastato rūšis @@ -114,7 +114,7 @@ Apskaičiuotasis šių grindų plotas - + The placement of this object Šio objekto išdėstymas @@ -204,12 +204,12 @@ Šio objekto išstūmimo krypties normalė (palikite (0,0,0) automatiniam normalės parinkimui) - + The linked object Susietas objektas - + The line width of the rendered objects Atvaizduotų objektų linijos storis @@ -504,37 +504,37 @@ Jungės storis - + The diameter of the bar Strypo skersmuo - + The distance between the border of the beam and the first bar (concrete cover). Sijos betono apsauginio sluoksnio storis iki pirmos armatūros. - + The distance between the border of the beam and the last bar (concrete cover). Atstumas tarp sijos rėmelio ir paskutiniojo strypo (betoninės dangos). - + The amount of bars Strypų skaičius - + The spacing between the bars Tarpas tarp strypų - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Strypų paskirstymo kryptis. Palikti (0,0,0) automatiniam nustatymui. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Siūlės, taikomos prie pagrindo, spindulys. Ši reikšmė išreiškiama strypo skersmens dalimi. @@ -614,52 +614,52 @@ Skaičiuoklės lakštas rezultatų spausdinimui - + If false, non-solids will be cut too, with possible wrong results. Jei nurodyta „Netiesa“, nepilnaviduriai kūnai bus taip pat pjaustomi, galimai klaidingai. - + The display length of this section plane Pjūvio plokštumos ilgio rodmuo - + The display height of this section plane Pjūvio plokštumos aukščio rodmuo - + The size of the arrows of this section plane Pjūvio plokštumos rodyklių dydis - + Show the cut in the 3D view Rodyti pjūvį 3D vaizde - + The rendering mode to use Naudoti atvaizdavimo būdą - + If cut geometry is shown or not Jeigu iškirpta geometrija yra vaizduojama arba ne - + If cut geometry is filled or not Jeigu iškirpta geometrija yra užpildyta arba ne - + The size of the texts inside this object Rašmenų dydis šio objekto viduje - + If checked, source objects are displayed regardless of being visible in the 3D model Jeigu patikrinta, šaltinio objektai yra vaizduojami neatsižvelgiant į tai kaip jie rodomi 3D modelyje @@ -1084,12 +1084,12 @@ Sluoksnio storių sąrašas - + The line color of the projected objects Projekciniuose vaizduose rodomo objekto linijų spalva - + The color of the cut faces (if turned on) Pjūvyje rodomų paviršių spalva (jeigu įjungta) @@ -1169,27 +1169,27 @@ Įjungti/Išjugti medžio gyslų tekstūros vaizdavimą - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Didžiausias atstumas tarp tolimiausių armatūrų. Reikšmė 0 automatinis parinkimas pagal armuojamo tūrio formą. - + List of placement of all the bars Strypų sudėliojimo sąrašas - + The structure object that hosts this rebar Objekto konstrukcija kuri turi armavimą - + The custom spacing of rebar Individualus atstumas tarp armatūrų - + Shape of rebar Armatūros lankstinio forma @@ -1264,12 +1264,12 @@ Taško lygis (0,0,0) šiame lygyje - + The shape of this object Objekto forma - + The line width of this object Objekto linijos plotis @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vaizdas - + Create Section Plane Sukurti pjūvio plokštumą @@ -2262,7 +2262,7 @@ Create Frame - + Create Rebar Create Rebar @@ -3215,7 +3215,7 @@ Floor creation aborted. Profilis - + Please select a base face on a structural object Please select a base face on a structural object @@ -3225,37 +3225,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3412,42 +3412,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4285,12 +4285,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4363,12 +4363,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.qm b/src/Mod/Arch/Resources/translations/Arch_nl.qm index 9623d0fb6f..b26786ff87 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_nl.qm and b/src/Mod/Arch/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index 7f85f6c7fe..befe2452d7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -29,7 +29,7 @@ De nummeringsstijl - + The type of this building Het type van dit gebouw @@ -114,7 +114,7 @@ De berekende oppervlakte van deze vloer - + The placement of this object De plaatsing van dit object @@ -204,12 +204,12 @@ De normale extrusierichting van dit opject (houd (0,0,0) voor automatische normaal) - + The linked object Het gekoppelde object - + The line width of the rendered objects De lijndikte van de weergegeven objecten @@ -504,37 +504,37 @@ Dikte van de flens - + The diameter of the bar De diameter van de staaf - + The distance between the border of the beam and the first bar (concrete cover). De afstand tussen de rand van de balk en de eerste staaf (betondekking). - + The distance between the border of the beam and the last bar (concrete cover). De afstand tussen de grens van de balk en de laatste staaf (beton dekking). - + The amount of bars De hoeveelheid staven - + The spacing between the bars De tussenruimte tussen de staven - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. De richting om de staven te verspreiden. Houdt (0,0,0) voor automatische richting. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. De toe te passen hoek van het basisprofiel. Deze waarde wordt vermenigvuldigd met de staafdiameter. @@ -614,52 +614,52 @@ Het werkblad om de resultaten van af te drukken - + If false, non-solids will be cut too, with possible wrong results. Wanneer onwaar, dan zullen de non-volumemodellen ook geknipt worden met mogelijke onjuiste resultaten. - + The display length of this section plane De weergavelengte van dit sectievlak - + The display height of this section plane De weergavehoogte van dit sectievlak - + The size of the arrows of this section plane De grootte van de pijlen van dit sectievlak - + Show the cut in the 3D view Toon de snede in 3D-weergave - + The rendering mode to use De rendermethode te gebruiken - + If cut geometry is shown or not Na het knippen zal de geometrie wel of niet worden weergegeven - + If cut geometry is filled or not Na het knippen zal de geometrie wel of niet worden weergegeven - + The size of the texts inside this object De grootte van de teksten binnen dit object - + If checked, source objects are displayed regardless of being visible in the 3D model Indien aangevinkt, worden bronobjecten weergegeven ongeacht de zichtbaarheid in het 3D-model @@ -1084,12 +1084,12 @@ De lijst met diktes van lagen - + The line color of the projected objects De lijnkleur van de geprojecteerde objecten - + The color of the cut faces (if turned on) De kleur van de oppervlaktes van de doorsnede (indien ingeschakeld) @@ -1169,27 +1169,27 @@ Schakelt de weergave van de houtnerf-structuur in of uit - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. De totale overspanning van de rails. 0 om automtisch de de grootte van de basisvorm te gebruiken. - + List of placement of all the bars Lijst van plaatsing van alle balken - + The structure object that hosts this rebar De object-structuur waar deze wapening op rust - + The custom spacing of rebar De aangepaste afstand van de wapening - + Shape of rebar Vorm van de wapening @@ -1264,12 +1264,12 @@ Het niveau van het (0,0,0) punt van dit niveau - + The shape of this object De vorm van dit object - + The line width of this object De lijnbreedte van dit object @@ -1364,12 +1364,12 @@ Een offset waarde om het geknipte vlak te verplaatsen vanuit het middelpunt - + Length of a single rebar Betonijzer lengte - + Total length of all rebars Totale lengte van alle wapening @@ -1394,22 +1394,22 @@ Wanneer waar, dan worden de kleuren van het gelinkte bestand up-to-date gehouden - + The objects that must be considered by this section plane. Empty means the whole document. De objecten die door dit sectievlak moeten worden overwogen. Leeg betekent het hele document. - + The transparency of this object De mate van doorzichtigheid van dit object - + The color of this object De kleur van dit object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) De afstand tussen te knippen vlak en de werkelijke weergegeven knip (Houd dit een zeer lage waarde maar niet nul) @@ -1629,12 +1629,12 @@ De beschrijving van IFC-attributen zijn nog niet geïmplementeerd - + If True, resulting views will be clipped to the section plane area. Indien waar, zullen de resulterende weergaven worden afgeknipt naar het gebied van de sectievlak. - + If true, the color of the objects material will be used to fill cut areas. Indien waar, zal de kleur van het objectmateriaal gebruikt worden om snijgebieden te vullen. @@ -1999,7 +1999,7 @@ Toon windroos diagram of niet. Gebruikt zonnediagram verde; omg. Ladybug module noodzakelijk - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Weergave van - + Create Section Plane Sectievlak maken @@ -2262,7 +2262,7 @@ Frame maken - + Create Rebar Wapening maken @@ -3215,7 +3215,7 @@ Vloer object wordt niet gemaakt. Profiel - + Please select a base face on a structural object Selecteer een basis vlak op een structueel object @@ -3225,37 +3225,37 @@ Vloer object wordt niet gemaakt. Maak externe verwijzing - + Section plane settings Doorsnede instellingen - + Objects seen by this section plane: Objecten zichtbaar in deze doorsnede: - + Section plane placement: Plaats doorsnede: - + Rotate X Rotatie X - + Rotate Y Rotatie Y - + Rotate Z Rotatie Z - + Resize Grootte aanpassen @@ -3412,42 +3412,42 @@ Een bouwterrein en gebouwobjecten zullen uit de selectie verwijderd worden. Dat kan veranderd worden in de voorkeuren. - + Remove highlighted objects from the list above Verwijder de gemarkeerde objecten uit de bovenstaande lijst - + Add selected Voeg geselecteerde toe - + Add selected object(s) to the scope of this section plane Voeg het(de) geselecteerde object(en) toe aan het bereik van dit sectievlak - + Rotates the plane along the X axis Draait het vlak langs de X-as - + Rotates the plane along the Y axis Draait het vlak langs de Y-as - + Rotates the plane along the Z axis Draait het vlak langs de Z-as - + Resizes the plane to fit the objects in the list above Past de grootte van het vlak aan om te passen aan de objecten in de bovenstaande lijst - + Centers the plane on the objects in the list above Centreert het vlak op de objecten in de bovenstaande lijst @@ -4285,12 +4285,12 @@ Dat kan veranderd worden in de voorkeuren. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Maakt een Wapeningsstaaf van het geselecteerde vlak bij een constructief-object - + Custom Rebar Aangepaste betonstaal @@ -4363,12 +4363,12 @@ Dat kan veranderd worden in de voorkeuren. Arch_SectionPlane - + Section Plane Sectieplan - + Creates a section plane object, including the selected objects Maakt een sectie vlak object, inclusief de geselecteerde objecten diff --git a/src/Mod/Arch/Resources/translations/Arch_no.qm b/src/Mod/Arch/Resources/translations/Arch_no.qm index fe27714de2..e9dfb30399 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_no.qm and b/src/Mod/Arch/Resources/translations/Arch_no.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_no.ts b/src/Mod/Arch/Resources/translations/Arch_no.ts index 0d3b71fe26..b71d44114b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_no.ts +++ b/src/Mod/Arch/Resources/translations/Arch_no.ts @@ -29,7 +29,7 @@ Nummereringsstilen - + The type of this building Byggets type @@ -114,7 +114,7 @@ Det kalkulerte etasjearealet av denne etasjen - + The placement of this object Plasseringen av dette objektet @@ -204,12 +204,12 @@ The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Visning av - + Create Section Plane Lag inndelingsplan @@ -2262,7 +2262,7 @@ Lag ramme - + Create Rebar Lag armering @@ -2873,7 +2873,7 @@ Site creation aborted. Grid - Grid + Rutenett @@ -3216,7 +3216,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3713,7 +3713,7 @@ You can change that in the preferences. Color - Color + Farge @@ -3827,7 +3827,7 @@ You can change that in the preferences. Grid - Grid + Rutenett @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -4673,7 +4673,7 @@ You can change that in the preferences. Import - Import + Importer diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index 09c79db516..f8d0ab0c97 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index 46b78bcd3d..cabe8da159 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -29,7 +29,7 @@ Styl numeracji - + The type of this building Typ tego budynku @@ -114,7 +114,7 @@ Obliczona powierzchnia rzutu tego piętra - + The placement of this object Położenie tego obiektu @@ -204,12 +204,12 @@ Normalny kierunek wytłaczania tego obiektu (utrzymaj (0,0,0) dla typowego automatycznie) - + The linked object Obiekt połączony - + The line width of the rendered objects Gruboć linii renderowanych obiektów @@ -504,37 +504,37 @@ Grubość półki - + The diameter of the bar Średnica pręta - + The distance between the border of the beam and the first bar (concrete cover). Odległość pomiędzy granicą belki a pierwszej zapory (konkretne pokrycie). - + The distance between the border of the beam and the last bar (concrete cover). Odległość pomiędzy granicą belki a ostatniej zapory zapory (konkretne pokrycie). - + The amount of bars Ilość prętów - + The spacing between the bars Odstępy między prętami - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Kierunek, w którym należy rozłożyć pręty. Zachowaj (0,0,0) dla automatycznego kierunku. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Zaokrąglenie należy zastosować do kąta profilu podstawowego. Ta wartość jest mnożona przez średnicę pręta. @@ -614,52 +614,52 @@ Arkusz do wydrukowania wyników - + If false, non-solids will be cut too, with possible wrong results. W przypadku fałszywego, nie-bryły również zostaną obcięte, z możliwymi błędnymi wynikami. - + The display length of this section plane Widoczna długość tej płaszczyzny przekroju - + The display height of this section plane Widoczna wysokość tej płaszczyzny przekroju - + The size of the arrows of this section plane Rozmiar strzałek na tej płaszczyźnie przekroju - + Show the cut in the 3D view Pokaż cięcie w widoku 3D - + The rendering mode to use Tryb renderowania - + If cut geometry is shown or not Jeżeli pokazana jest geometria cięcia, czy nie - + If cut geometry is filled or not Jeśli geometria cięcia jest wypełniona lub nie - + The size of the texts inside this object Rozmiar tekstów wewnątrz tego obiektu - + If checked, source objects are displayed regardless of being visible in the 3D model Jeśli jest zaznaczone, obiekty źródłowe są wyświetlane niezależnie od tego, czy są widoczne w modelu 3D @@ -1084,12 +1084,12 @@ Lista grubości warstw - + The line color of the projected objects Kolor linii rzutowanych obiektów - + The color of the cut faces (if turned on) Kolor przyciętych powierzchni (jeśli jest włączony) @@ -1169,27 +1169,27 @@ Włącza/wyłącza wyświetlanie tekstury włókien drewna - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Całkowita odległość do rozpiętości prętów zbrojeniowych. Zachowaj 0, aby automatycznie używać rozmiaru kształtu obiektu głównego. - + List of placement of all the bars Lista rozmieszczenia wszystkich belek - + The structure object that hosts this rebar Obiekt konstrukcji obsługujący to zbrojenie - + The custom spacing of rebar Niestandardowe odstępy prętów zbrojeniowych - + Shape of rebar Kształt zbrojenia @@ -1264,12 +1264,12 @@ Poziom koty (0,0,0) piętra - + The shape of this object Kształt tego obiektu - + The line width of this object Szerokość linii tego obiektu @@ -1364,12 +1364,12 @@ Odsunięcie płaszczyzny przekroju od punktu środkowego - + Length of a single rebar Długość pojedynczego zbrojenia - + Total length of all rebars Całkowita długość wszystkich prętów zbrojeniowych @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Przezroczystość tego obiektu - + The color of this object Kolor tego obiektu - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Odległość między płaszczyzną cięcia i rzeczywistym widokiem cięcia (zachowaj bardzo małą wartość, ale nie zerową) @@ -1629,12 +1629,12 @@ Opis atrybutów IFC nie jest jeszcze zaimplementowany - + If True, resulting views will be clipped to the section plane area. Jeśli prawda, wynikowe wyświetlenia zostaną przycięte do obszaru płaszczyzny przekroju. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Pokaż schemat róży wiatru lub nie. Używa skali wykresu słonecznego. Wymaga modułu Ladybug - + The rebar mark Znacznik pręta zbrojeniowego @@ -2142,9 +2142,9 @@ Widok - + Create Section Plane - Tworzenie płaszczyzny przekroju + Utwórz płaszczyznę przekroju @@ -2154,7 +2154,7 @@ Create Structure - Tworzenie struktury + Utwórz strukturę @@ -2262,7 +2262,7 @@ Utwórz ramę - + Create Rebar Stwórz Zbrojenie @@ -2585,7 +2585,7 @@ Jeśli Bieg = 0, wtedy bieg jest obliczany tak, że wysokość jest taka sama, j Chamfer - Faza + Fazka @@ -3217,7 +3217,7 @@ Tworzenie Piętra zostało przerwane. Profil - + Please select a base face on a structural object Wybierz powierzchnię bazową na obiekcie strukturalnym @@ -3227,37 +3227,37 @@ Tworzenie Piętra zostało przerwane. Stwórz zewnętrzne odniesienie - + Section plane settings Ustawienia płaszczyzny przekroju - + Objects seen by this section plane: Obiekty widoczene w tej płaszczyźnie przekroju: - + Section plane placement: Umiejscowienie płaszczyzny przekroju: - + Rotate X Obróć X - + Rotate Y Obróć Y - + Rotate Z Obróć Z - + Resize Zmień rozmiar @@ -3414,42 +3414,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Usuń podświetlone obiekty z listy powyżej - + Add selected Dodaj wybrane - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Obróć płaszczyznę względem osi X - + Rotates the plane along the Y axis Obróć płaszczyznę względem osi Y - + Rotates the plane along the Z axis Obróć płaszczyznę względem osi Z - + Resizes the plane to fit the objects in the list above Zmień rozmiar płaszczyzny, aby dopasować obiekty z powyższej listy - + Centers the plane on the objects in the list above Wyśrodkuje płaszczyznę na obiektach znajdujących się powyżej @@ -3686,7 +3686,7 @@ You can change that in the preferences. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Biblioteka Python shapefile nie została znaleziona w Twoim systemie. Czy chcesz pobrać ją teraz z <a href="https://github.com/GeospatialPython/pyshp">https://github. om/GeospatialPython/pyshp</a>? Plik zostanie umieszczony w folderze makro. @@ -4287,12 +4287,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Tworzy pręt zbrojeniowy z wybranych powierzchni konstrukcyjnych obiektu - + Custom Rebar Custom Rebar @@ -4365,12 +4365,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Płaszczyzna przekroju - + Creates a section plane object, including the selected objects Tworzy obiekt płaszczyzny przekroju, łącznie z wybranymi obiektami diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index 520b6f6809..9040b61d8c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 306aa807f6..ed050e5037 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -29,7 +29,7 @@ O estilo de numeração - + The type of this building O tipo desta construção @@ -114,7 +114,7 @@ A área deste piso calculada - + The placement of this object O localizador deste objeto @@ -204,12 +204,12 @@ A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The linked object O objeto vinculado - + The line width of the rendered objects A largura da linha dos objetos renderizadas @@ -504,37 +504,37 @@ Espessura da flange - + The diameter of the bar O diâmetro da barra - + The distance between the border of the beam and the first bar (concrete cover). A distância entre a borda da viga e a primeira barra (cobertura de concreto). - + The distance between the border of the beam and the last bar (concrete cover). A distância entre a borda da viga e a última barra (cobertura de concreto). - + The amount of bars A quantidade de barras - + The spacing between the bars O espaçamento entre as barras - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. A direção para usar para espalhar as barras. Manter (0,0,0) para direção automática. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. O filete a aplicar ao ângulo do perfil de base. Esse valor é multiplicado pelo diâmetro da barra. @@ -614,52 +614,52 @@ A planilha onde o resultado será mostrado - + If false, non-solids will be cut too, with possible wrong results. Se falso, objetos não-sólidos também serão cortados, com possíveis resultados errados. - + The display length of this section plane O comprimento da representação 3D deste plano de corte - + The display height of this section plane A altura da representação 3D deste plano de corte - + The size of the arrows of this section plane O tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se esta casa estiver marcada, objetos fonte serão exibidos mesmo se estão invisíveis na vista 3D @@ -1084,12 +1084,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1169,27 +1169,27 @@ Liga/desliga a exibição da textura de grão da madeira - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. A distância total coberta por barras. Mantenha 0 para usar automaticamente o tamanho da forma anfitriã. - + List of placement of all the bars Lista de localizadores de todas as barras - + The structure object that hosts this rebar O objeto estrutura que hospeda esta ferragem - + The custom spacing of rebar O espaçamento personalizado da ferragem - + Shape of rebar Forma da ferragem @@ -1264,12 +1264,12 @@ O nível do ponto (0,0,0) deste nível - + The shape of this object A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1364,12 +1364,12 @@ Um valor de deslocamento para afastar o plano de corte do seu ponto de base - + Length of a single rebar Comprimento de uma única barra - + Total length of all rebars Comprimento total de todas as barras @@ -1394,22 +1394,22 @@ Se verdadeiro, as cores do arquivo vinculado serão mantidas atualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os objetos que devem ser considerados por este plano de corte. Vazio significa: todos os objetos do documento. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) @@ -1629,12 +1629,12 @@ Descrição dos atributos IFC ainda não estão implementados - + If True, resulting views will be clipped to the section plane area. Se Verdadeiro, resultados da Visualização serão recortados para o plano de área de seção. - + If true, the color of the objects material will be used to fill cut areas. Se verdadeiro, a cor do material dos objetos será usada para preencher áreas de corte. @@ -1999,7 +1999,7 @@ Mostra um diagrama de rosa de ventos ou não. Usa a escala do diagrama solar. Precisa do módulo Ladybug - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Criar um plano de corte @@ -2262,7 +2262,7 @@ Criar uma armação - + Create Rebar Criar ferragens @@ -3212,7 +3212,7 @@ Floor creation aborted. Perfil - + Please select a base face on a structural object Por favor, selecione uma face de base em um objeto estrutural @@ -3222,37 +3222,37 @@ Floor creation aborted. Criar referência externa - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Localizador deste plano de corte: - + Rotate X Rotação X - + Rotate Y Rotação Y - + Rotate Z Rotação Z - + Resize Redimensionar @@ -3403,42 +3403,42 @@ You can change that in the preferences. Em um objeto do tipo Edificação, você pode colocar qualquer objeto, exceto: Sítio, Edificação. Objetos destes tipos serão removidos da seleção. Você pode mudar isso nas preferências. - + Remove highlighted objects from the list above Remover objetos destacados da lista acima - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane Adicionar objeto(s) selecionado(s) ao escopo deste plano de secção - + Rotates the plane along the X axis Rotacionar o plano ao longo do eixo X - + Rotates the plane along the Y axis Rotacionar o plano ao longo do eixo Y - + Rotates the plane along the Z axis Rotacionar o plano ao longo do eixo Z - + Resizes the plane to fit the objects in the list above Redimensiona o plano para que os objetos da lista acima caibam - + Centers the plane on the objects in the list above Centraliza o plano na lista de objetos acima @@ -4276,12 +4276,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Cria uma barra de reforço a partir de uma face selecionada de um objeto estrutural - + Custom Rebar Ferragem customizada @@ -4354,12 +4354,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index 1d1c1c070d..f8f397f374 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index 3b0ebfdf12..4cab251720 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -29,7 +29,7 @@ Estilo de numeração - + The type of this building Tipo de edifício @@ -114,7 +114,7 @@ A área calculada para este Piso (andar) - + The placement of this object A posição deste objeto @@ -204,12 +204,12 @@ A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The linked object O objeto ligado - + The line width of the rendered objects A espessura da linha dos objetos renderizados @@ -504,37 +504,37 @@ Espessura da flange - + The diameter of the bar Diâmetro da barra - + The distance between the border of the beam and the first bar (concrete cover). A distância entre a borda da viga e a primeira barra (recobrimento de betão). - + The distance between the border of the beam and the last bar (concrete cover). A distância entre a borda da viga e a ultima barra (recobrimento de betão). - + The amount of bars Quantidade de barras - + The spacing between the bars Espaçamento entre as barras - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. A direção a usar para espalhar as barras. Manter (0,0,0) para direção automática. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. A dobra a aplicar ao ângulo do perfil de base. Este valor é multiplicado pelo diâmetro da barra. @@ -614,52 +614,52 @@ Tabela (folha de cálculo) onde o resultado será mostrado - + If false, non-solids will be cut too, with possible wrong results. Se falso, não-sólidos serão também cortados, com possíveis resultados errados. - + The display length of this section plane Comprimento da representação 3D deste plano de corte - + The display height of this section plane Altura da representação 3D deste plano de corte - + The size of the arrows of this section plane Tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se marcado, objetos são mostrados independente de estarem visível no modelo 3D @@ -1084,12 +1084,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1169,27 +1169,27 @@ Liga/desliga a exibição da textura de grão da madeira - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. A distância total a abranger pela Armadura de reforço. Mantenha 0 para usar automaticamente o tamanho da forma de acolhimento. - + List of placement of all the bars Lista de posições de todas as barras - + The structure object that hosts this rebar O objeto estrutura que hospeda esta Armadura de reforço - + The custom spacing of rebar O espaçamento personalizado da Armadura de reforço - + Shape of rebar Forma da Armadura de reforço @@ -1264,12 +1264,12 @@ A cota do ponto (0,0,0) deste nível - + The shape of this object A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1364,12 +1364,12 @@ Um valor de deslocamento para mover o plano de corte do ponto central - + Length of a single rebar Comprimento de uma única Armadura de reforço - + Total length of all rebars Comprimento total de todas as armaduras de reforço @@ -1394,22 +1394,22 @@ Se verdadeiro, as cores do arquivo vinculado serão mantidas atualizadas - + The objects that must be considered by this section plane. Empty means the whole document. Os objetos que devem ser considerados por este plano de corte. Vazio significa o documento inteiro. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) @@ -1629,12 +1629,12 @@ Descrição dos atributos IFC ainda não foram implementados - + If True, resulting views will be clipped to the section plane area. Se verdadeiro, as vistas resultantes serão cortadas para a área do plano de corte. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark A marca da Armadura de reforço @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Criar Plano de Corte @@ -2262,7 +2262,7 @@ Criar armação - + Create Rebar Criar armadura @@ -3204,7 +3204,7 @@ Floor creation aborted. Perfil - + Please select a base face on a structural object Por favor selecione uma face base num objeto estrutural @@ -3214,37 +3214,37 @@ Floor creation aborted. Criar referência externa - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Posição do plano de corte: - + Rotate X Rodar X - + Rotate Y Rodar Y - + Rotate Z Rodar Z - + Resize Redimensionar @@ -3398,42 +3398,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4271,12 +4271,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Cria uma armadura de reforço a partir de uma face selecionada de um objeto estrutural - + Custom Rebar Armadura de reforço personalizada @@ -4349,12 +4349,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.qm b/src/Mod/Arch/Resources/translations/Arch_ro.qm index 129afc4c67..a2bb3b54d1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ro.qm and b/src/Mod/Arch/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 95398e9a7e..c93dbb3e0d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -29,7 +29,7 @@ Stilul de numerotare - + The type of this building Tipul contrucției @@ -114,7 +114,7 @@ Aria calculata a acestei podele - + The placement of this object Amplasarea acestui obiect @@ -204,12 +204,12 @@ Direcția normala de extrudare a acestui obiect (păstrează (0,0,0) pentru normare automata) - + The linked object Obiectul corelat - + The line width of the rendered objects Lățimea liniei ale obiectelor redate @@ -504,37 +504,37 @@ Grosime flanșă - + The diameter of the bar Diametrul barei - + The distance between the border of the beam and the first bar (concrete cover). Distanța între margine grinzii și prima bară încastrată în beton. - + The distance between the border of the beam and the last bar (concrete cover). Distanța între marginea grinzii și ultima bară (încastrată în beton). - + The amount of bars Numărul barelor - + The spacing between the bars Spațiul dintre bare - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Direcția în care pleacă barele. Lăsați la (0,0,0) pentru direcție implicită. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Fileul de aplicat unghiului profilului de bază. Această valoare este înmulțită cu diametrul barei. @@ -614,52 +614,52 @@ Foaia de calcul unde se tipăresc rezultatele - + If false, non-solids will be cut too, with possible wrong results. Dacă valoarea este <<false>>, elementele non solide vor fi de asemenea secționate, posibil să se obțină rezultate imprevizibile. - + The display length of this section plane Lungimea vederii de afișare al acestui plan de secționare - + The display height of this section plane Înălțimea vederii de afișare a acestui plan de secționare - + The size of the arrows of this section plane Dimensiunea săgeţilor acestui plan de secțiune - + Show the cut in the 3D view Arată secțiunea în vizualizarea 3D - + The rendering mode to use Modul de redare de utilizat - + If cut geometry is shown or not Dacă geometria secțiunii este afișată sau nu - + If cut geometry is filled or not Dacă geometria secțiunii este umplută sau nu - + The size of the texts inside this object Dimensiunea textelor în interiorul acestui obiect - + If checked, source objects are displayed regardless of being visible in the 3D model În cazul în care bifat, sursa de obiecte sunt afişată indiferent dacă sunt vizibile sau nu în modelul 3D @@ -1084,12 +1084,12 @@ Lista de grosimi de strat - + The line color of the projected objects Culoarea obiectelor proiectate - + The color of the cut faces (if turned on) Culoarea tăiate feţele (dacă este activată) @@ -1169,27 +1169,27 @@ Active ou désactive l’affichage de la texture de grain de bois - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Distanța totală pentru a trece peste armatura. Păstraţi 0 pentru a utiliza automat dimensiunea de forma gazdă. - + List of placement of all the bars Listă de plasare de toate armăturile - + The structure object that hosts this rebar Structura obiectului care găzduieşte această armare - + The custom spacing of rebar Spațiere particularizată de armare - + Shape of rebar Forma armaturii @@ -1264,12 +1264,12 @@ Nivelul punctului (0,0,0) la acest nivel - + The shape of this object Forma acestui obiect - + The line width of this object Lățimea liniei acestui obiect @@ -1364,12 +1364,12 @@ O valoare offset pentru a muta planul de tăiere de la punctul de centru - + Length of a single rebar Lungimea unei singure armături - + Total length of all rebars Longueur totale de toutes les armatures @@ -1394,22 +1394,22 @@ Dacă este adevărat, culorile din fişierul conectat vor fi actualizate - + The objects that must be considered by this section plane. Empty means the whole document. Obiectele care trebuiesc luate în considerare de acest plan de secționare. Gol înseamnă tot documentul. - + The transparency of this object Transparenţa acestui obiect - + The color of this object Culoare acest obiect - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Distanța dintre planul de secțiune și planul actual de vedere (păstrează o valoare foarte mică, dar nu zero) @@ -1629,12 +1629,12 @@ Descrierea atributelor IFC nu este deocamdată implementat - + If True, resulting views will be clipped to the section plane area. Dacă este Adevărat, vederile rezultate vor fi restrânse la zona planului de secțiune. - + If true, the color of the objects material will be used to fill cut areas. Dacă este Adevărat, culoarea materialului obiectului va fi folosit pentru a umple zonele secțiunii. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vedere a - + Create Section Plane Creare plan de secționare @@ -2262,7 +2262,7 @@ Crează cadru - + Create Rebar Crează bară de armare @@ -3212,7 +3212,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Vă rugăm să selectaţi o faţă bază pe un obiect structural @@ -3222,37 +3222,37 @@ Floor creation aborted. Creează o referință externă - + Section plane settings Reglarea planului de secțiune - + Objects seen by this section plane: Obiect vizualizat în acest plan: - + Section plane placement: Amplasamentul planului de secțiune: - + Rotate X Rotaţie X - + Rotate Y Rotaţie Y - + Rotate Z Rotaţie Z - + Resize Redimensionați @@ -3403,42 +3403,42 @@ You can change that in the preferences. Puteți pune orice, în afară de Site, Obiecte de construcție, într-un obiect Construcție. Obiectele Construcție nu au voie să accepte un obiect Site sau obiecte Construcție. Site-ul și Obiectele Construcția vor fi eliminate din selecție. Puteți modifica acest lucru în preferințe. - + Remove highlighted objects from the list above Eliminați obiectele evidențiate din lista de mai sus - + Add selected Adaugă Selecția - + Add selected object(s) to the scope of this section plane Adăugați obiectul(ele) selectate la spațiul planului de sețiune - + Rotates the plane along the X axis Rotiți planul în jurul axei Y - + Rotates the plane along the Y axis Rotiți planul în jurul axei X - + Rotates the plane along the Z axis Rotiți planul în jurul axei Z - + Resizes the plane to fit the objects in the list above Redimensionează planul pentru a se potrivi la obiectele din lista de mai sus - + Centers the plane on the objects in the list above Centrează planul pentru a se potrivi pe obiectele din lista de mai sus @@ -4276,12 +4276,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creează o bară de armare din fața selectată a unui obiect structural - + Custom Rebar Armatură personalizată @@ -4354,12 +4354,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Planul de selecţie - + Creates a section plane object, including the selected objects Crează un obiect - secţiune plană incluzând obiectele selectate diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index 95831edbd5..e7707feff7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 0d92dbcb29..37ed44797c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -29,7 +29,7 @@ Стиль нумерации - + The type of this building Тип здания @@ -114,7 +114,7 @@ Расчётная площадь этажа - + The placement of this object Размещение объекта @@ -204,12 +204,12 @@ Направление выдавливания объекта (оставить (0,0,0) для автоматического определения) - + The linked object Связанный объект - + The line width of the rendered objects Толщина линии отрисованных объектов @@ -504,37 +504,37 @@ Толщина фланца - + The diameter of the bar Диаметр стержня - + The distance between the border of the beam and the first bar (concrete cover). Расстояние между границей балки и первым стержнем (защитный слой бетона). - + The distance between the border of the beam and the last bar (concrete cover). Расстояние между границей балки и последним стержнем (защитный слой бетона). - + The amount of bars Количество стержней - + The spacing between the bars Расстояние между стержнями - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Направление распространения стержней. Оставьте (0,0,0) для автоматического определения. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Кромка базового профиля. Значение умножается на диаметр стержня. @@ -614,52 +614,52 @@ Электронная таблица для вывода результатов - + If false, non-solids will be cut too, with possible wrong results. Если ложь, также будет сделано сечение нетвердотельных объектов. Возможно, с некорректным результатом. - + The display length of this section plane Отображение длины плоскости сечения - + The display height of this section plane Отображение высоты плоскости сечения - + The size of the arrows of this section plane Размер углов плоскости сечения - + Show the cut in the 3D view Показать сечение в трёхмерном виде - + The rendering mode to use Используемый режим визуализации - + If cut geometry is shown or not Показывать ли сечение геометрии или нет - + If cut geometry is filled or not Делать ли заливку обрезанной геометрии или нет - + The size of the texts inside this object Размер текста внутри объекта - + If checked, source objects are displayed regardless of being visible in the 3D model Если флажок установлен, исходные объекты отображаются независимо от видимости в 3D-модели @@ -746,7 +746,7 @@ The objects that make the boundaries of this space object - Объекты, образующие границу объекта зоны + Объекты, образующие границу зоны объекта @@ -906,7 +906,7 @@ The type of landings of these stairs - Тип площадки лестницы + Тип лестничных площадок @@ -1084,12 +1084,12 @@ Список толщин слоя - + The line color of the projected objects Цвет линии проецируемых объектов - + The color of the cut faces (if turned on) Цвет сечения граней (если включен) @@ -1169,27 +1169,27 @@ Включение / выключение отображения текстуры древесных волокон - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Общая длина арматуры в пролёте. Задайте 0, чтобы автоматически применить размер исходной фигуры. - + List of placement of all the bars Список размещения всех стержней - + The structure object that hosts this rebar Структурный объект, в котором находится арматура - + The custom spacing of rebar Пользовательский шаг арматуры - + Shape of rebar Форма арматуры @@ -1264,12 +1264,12 @@ Уровень точки отсчета (0,0,0) этого этажа - + The shape of this object Форма этого объекта - + The line width of this object Ширина линий этого объекта @@ -1364,12 +1364,12 @@ Значение смещения плоскости сечения от центральной точки - + Length of a single rebar Длина одного стержня арматуры - + Total length of all rebars Общая длина всей арматуры @@ -1394,22 +1394,22 @@ Если истина, то цвета из связанного файла будет обновляться - + The objects that must be considered by this section plane. Empty means the whole document. Объекты, которые должны быть видны на этой плоскости сечения. Пустой означает весь документ. - + The transparency of this object Прозрачность этого объекта - + The color of this object Цвет этого объекта - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Расстояние между плоскостью сечения и сечением текущего вида(устанавливайте очень маленькое, но не нулевое значение) @@ -1629,12 +1629,12 @@ Описание атрибутов IFC еще не реализовано - + If True, resulting views will be clipped to the section plane area. Если True, то отображенные виды будут вырезаны в плоскость секции. - + If true, the color of the objects material will be used to fill cut areas. Если значение "true", то цвет материала объекта будет использоваться для заполнения разрезанных областей. @@ -1999,7 +1999,7 @@ Показать диаграмму "Роза ветров". Использует масштаб солнечной диаграммы. Нужен модуль Ladybug - + The rebar mark Марка арматуры @@ -2142,7 +2142,7 @@ Вид - + Create Section Plane Создать плоскость сечения @@ -2262,7 +2262,7 @@ Создать Каркас - + Create Rebar Создать Арматуру @@ -3217,7 +3217,7 @@ Floor creation aborted. Профиль - + Please select a base face on a structural object Пожалуйста, выберите базовую грань структурного объекта @@ -3227,37 +3227,37 @@ Floor creation aborted. Создать внешнюю ссылку - + Section plane settings Настройки плоскости сечения - + Objects seen by this section plane: Объекты, видимые плоскостью сечения: - + Section plane placement: Размещение плоскости сечения: - + Rotate X Повернуть по X - + Rotate Y Повернуть по Y - + Rotate Z Повернуть по Z - + Resize Изменить размер @@ -3414,42 +3414,42 @@ You can change that in the preferences. Вы можете изменить это в настройках. - + Remove highlighted objects from the list above Удалите выделенные объекты из списка выше - + Add selected Добавить выбранное - + Add selected object(s) to the scope of this section plane Добавить выбранный объект(ы) в область этой плоскости сечения - + Rotates the plane along the X axis Поворачивает плоскость вдоль оси X - + Rotates the plane along the Y axis Поворачивает плоскость вдоль оси Y - + Rotates the plane along the Z axis Поворачивает плоскость вдоль оси Z - + Resizes the plane to fit the objects in the list above Изменяет плоскость по размеру объектов в списке - + Centers the plane on the objects in the list above Центровать плоскость по объектам в списке @@ -3686,7 +3686,7 @@ You can change that in the preferences. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Библиотека python shapefile не найдена в вашей системе. Хотите загрузить ее сейчас с <a href="https://github.com/GeospatialPython/pyshp">https://github. om/GeospatialPython/pyshp</a>? Она будет помещена в папку макросов. @@ -4287,12 +4287,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Создаёт арматурный стержень на основе выбранной грани структурного объекта - + Custom Rebar Пользовательская Арматура @@ -4365,12 +4365,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Плоскость Сечения - + Creates a section plane object, including the selected objects Создаёт объект плоскости сечения, выбранных объектов diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.qm b/src/Mod/Arch/Resources/translations/Arch_sk.qm index 8bf23bf47f..047c567bc3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sk.qm and b/src/Mod/Arch/Resources/translations/Arch_sk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.ts b/src/Mod/Arch/Resources/translations/Arch_sk.ts index 8369d84b33..f9dfe3a368 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sk.ts @@ -29,7 +29,7 @@ Štýl číslovania - + The type of this building Typ tejto budovy @@ -114,7 +114,7 @@ Vypočítaná plocha tohto podlažia - + The placement of this object Umiestnenie objektu @@ -204,12 +204,12 @@ The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object Prepojený objekt - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Pohľad na - + Create Section Plane Vytvorenie roviny rezu @@ -2262,7 +2262,7 @@ Create Frame - + Create Rebar Create Rebar @@ -3216,7 +3216,7 @@ Floor creation aborted. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Rovina rezu - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index bce49f5ead..d65c2b885e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 928c0c112f..2255b43443 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -21,7 +21,7 @@ The size of the axis bubbles - Velikost mehurčkov osi + Velikost balončkov osi @@ -29,7 +29,7 @@ Slog oštevilčevanja - + The type of this building Vrsta zgradbe @@ -114,7 +114,7 @@ Izračunana površina tal tega nadstropja - + The placement of this object Postavitev tega predmeta @@ -204,12 +204,12 @@ Normala smeri izrivanja tega predmeta (pustite (0,0,0) za samodejno smer) - + The linked object Povezani predmet - + The line width of the rendered objects Debelina črte izrisanih predmetov @@ -504,37 +504,37 @@ Debelina roba - + The diameter of the bar Premer armaturne palice - + The distance between the border of the beam and the first bar (concrete cover). Razdalja med robom nosilca in prvo palico (zaščitna betonska plast). - + The distance between the border of the beam and the last bar (concrete cover). Razdalja med robom nosilca in zadnjo palico (zaščitna betonska plast). - + The amount of bars Število palic - + The spacing between the bars Razmik med palicami - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Smer razporejanja palic. Pusti (0,0,0) za samodejno smer. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Zaokorožitev roba, ki bo uporabljena na osnovnem prerezu. Vrednost je pomnožena s premerom palice. @@ -614,52 +614,52 @@ Preglednica za tiskanje rezultatov - + If false, non-solids will be cut too, with possible wrong results. Če je narobe, bodo prerezani tudi nepolni predmeti z možnimi napačnimi rezultati. - + The display length of this section plane Prikazana dolžina te presečne ravnine - + The display height of this section plane Prikazana višina te prečne ravnine - + The size of the arrows of this section plane Velikost puščic te presečne ravnine - + Show the cut in the 3D view Prikaži prerez v pogledu 3D - + The rendering mode to use Uporabljen način prikaza - + If cut geometry is shown or not Če je rezna geometrija prikazana ali ne - + If cut geometry is filled or not Če je rezna geometrija polnjena ali ne - + The size of the texts inside this object Velikost pisave znotraj predmeta - + If checked, source objects are displayed regardless of being visible in the 3D model Kadar obkljukano, izvori predmetov so prikazani ne glede na to ali so vidni v 3D modelu @@ -1084,12 +1084,12 @@ Seznam debeline slojev - + The line color of the projected objects Barva črt preslikanih predmetov - + The color of the cut faces (if turned on) Barva rezanih ploskev (če je vklopljeno) @@ -1169,27 +1169,27 @@ Vključi/izključi prikaz lesene strukture - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Celotna dolžina armaturnih palic. Pustite 0 za samodejno upoštevanje dolžine gostitelja. - + List of placement of all the bars Seznam postavitev vseh palic - + The structure object that hosts this rebar Nosilni element, ki vsebuje to armaturo - + The custom spacing of rebar Ročna nastavitev razmika betonskega jekla - + Shape of rebar Oblika betonskih jekel @@ -1226,7 +1226,7 @@ Where to add bubbles to this axis: Start, end, both or none - Kam na os dodati krožec: na začetek, na konec, na obse strani ali nikamor + Kam na os dodati balončke: na začetek, na konec, na obe strani ali nikamor @@ -1264,12 +1264,12 @@ Višina točke (0,0,0) te ravni - + The shape of this object Oblika tega objekta - + The line width of this object Debelina črt tega predmeta @@ -1311,7 +1311,7 @@ Camera position data associated with this object - Podatki o mestu kamere vezani na ta predmet + Podatki o položaju kamere vezani na ta predmet @@ -1364,12 +1364,12 @@ Vrednost odmika prerezne ravnine od središča - + Length of a single rebar Dolžina ene armaturne palice - + Total length of all rebars Skupna dolžina betonskih jekel @@ -1394,22 +1394,22 @@ Če drži, se bodo barve povezane datoteke posodabljale - + The objects that must be considered by this section plane. Empty means the whole document. Predmeti, ki morajo biti v prerezni ravnini zajeti. Prazno pomeni celoten dokument. - + The transparency of this object Prozornost tega predmeta - + The color of this object Barva tega predmeta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Razdalja med rezalno ravnino in ravnino vidnega polja (razdalja naj bo majhna, vendar ne nič) @@ -1629,12 +1629,12 @@ Opisi IFC značilk niso še podprti - + If True, resulting views will be clipped to the section plane area. Če drži, bodo posledično pogledi zamejeni s površino presečne ravnine. - + If true, the color of the objects material will be used to fill cut areas. Če drži, bo za zapolnitev odrezanih ploskev uporabljena barva predmetove snovi. @@ -1691,12 +1691,12 @@ The shape color of child objects - Barva oblike podrejenga predmeta + Barva oblike podrejenega predmeta The transparency of child objects - Prozornost podrejenga predmeta + Prozornost podrejenega predmeta @@ -1741,7 +1741,7 @@ The distance between the level plane and the cut line - The distance between the level plane and the cut line + Razdalja med ravnino ravni in rezalni črto @@ -1756,87 +1756,87 @@ The number of vertical mullions - The number of vertical mullions + Število navpičnic okenskega križa If the profile of the vertical mullions get aligned with the surface or not - If the profile of the vertical mullions get aligned with the surface or not + Ali se presek navpičnic okenskega križa poravna s površino ali ne The number of vertical sections of this curtain wall - The number of vertical sections of this curtain wall + Število navpičnih pasov te steklene fasade A profile for vertical mullions (disables vertical mullion size) - A profile for vertical mullions (disables vertical mullion size) + Profil za navpičnice okenskega križa (onemogoči velikost navpičnic okenskega križa) The number of horizontal mullions - The number of horizontal mullions + Število vodoravnic okenskega križa If the profile of the horizontal mullions gets aligned with the surface or not - If the profile of the horizontal mullions gets aligned with the surface or not + Ali se presek vodoravnic okenskega križa poravna s površino ali ne The number of horizontal sections of this curtain wall - The number of horizontal sections of this curtain wall + Število vodoravnih pasov te steklene fasade A profile for horizontal mullions (disables horizontal mullion size) - A profile for horizontal mullions (disables horizontal mullion size) + Profil za vodoravnice okenskega križa (onemogoči velikost vodoravnic okenskega križa) The number of diagonal mullions - The number of diagonal mullions + Število poševnic okenskega križa The size of the diagonal mullions, if any, if no profile is used - The size of the diagonal mullions, if any, if no profile is used + Velikost poševnic okenskega križa, če sploh so in če ni uporabljen noben presek A profile for diagonal mullions, if any (disables horizontal mullion size) - A profile for diagonal mullions, if any (disables horizontal mullion size) + Profil za poševnice okenskega križa (onemogoči velikost poševnice okenskega križa) The number of panels - The number of panels + Število polj The thickness of the panels - The thickness of the panels + Debelina polj Swaps horizontal and vertical lines - Swaps horizontal and vertical lines + Zamenja vodoravne in navpične poteze Perform subtractions between components so none overlap - Perform subtractions between components so none overlap + Med sestavinami izvrši odvzemanje, da se nič ne prekriva Centers the profile over the edges or not - Centers the profile over the edges or not + Usredinja profil čez robove ali ne The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + Sklicna navpična smer, ki se uporabi pri tem predmetu za določanje navpične/vodoravne smeri. Držite jo blizu dejanske navpične smeri vaše steklene stene @@ -1851,7 +1851,7 @@ If True, a spreadsheet containing the results is recreated when needed - If True, a spreadsheet containing the results is recreated when needed + Če drži, potem se, ko je to potrebno, preglednica z rezulati ponovno izpiše @@ -1891,12 +1891,12 @@ An optional start offset for the top strut - An optional start offset for the top strut + Možnost odmika začetka pri zgornjem oporniku An optional end offset for the top strut - An optional end offset for the top strut + Možnost odmika zaključka pri zgornjem oporniku @@ -1916,27 +1916,27 @@ The direction of the rods - The direction of the rods + Smer palic The diameter or side of the rods - The diameter or side of the rods + Premer ali stran palic The number of rod sections - The number of rod sections + Število odsekov palic If the truss has a rod at its endpoint or not - If the truss has a rod at its endpoint or not + Ali ima paličje na koncih palico ali ne How to draw the rods - How to draw the rods + Kako se nariše palice @@ -1961,32 +1961,32 @@ An optional host object for this curtain wall - An optional host object for this curtain wall + Gostujoči predmet steklene fasade The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + Višina steklene fasade, če temelji na robu The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + Višina navpičnic okenskega križa, če ni uporabljen določeni presek The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + Širina navpičnic okenskega križa, če ni uporabljen določeni presek The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + Višina vodoravnic okenskega križa, če ni uporabljen določeni presek The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + Širina vodoravnic okenskega križa, če ni uporabljen določeni presek @@ -1996,10 +1996,10 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Prikaži vetrovno rožo ali ne. Uporablja merilo sončnega diagrama. Potreben je modul Ladybug - + The rebar mark Oznaka armaturne palice @@ -2142,7 +2142,7 @@ Pogled - + Create Section Plane Ustvari presečno ravnino @@ -2262,7 +2262,7 @@ Ustvari ogrodje - + Create Rebar Ustvari ojačitveni drog @@ -3120,7 +3120,7 @@ Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. V predmet Etaža lahko vstavite vse razen Lokacije, Stavbe in Etaže. Etaža ne sprejema Lokacije, Stavbe in Etaže, zato bodo ti predmeti izvzeti iz izbora. -To lahko spremenite v nastavitvah. +To lahko spremenite v prenastavitvah. @@ -3215,7 +3215,7 @@ Ustvarjanje etaže prekinjeno. Profil - + Please select a base face on a structural object Izberite izhodiščno ploskev na nosilnem gradniku @@ -3225,37 +3225,37 @@ Ustvarjanje etaže prekinjeno. Ustvari zunanji sklic - + Section plane settings Nastavitve prerezne ravnine - + Objects seen by this section plane: Predmeti, vidni v prerezni ravnini: - + Section plane placement: Umestitev prerezne ravnine: - + Rotate X Zavrti X - + Rotate Y Zavrti Y - + Rotate Z Zavrti Z - + Resize Spremeni velikost @@ -3273,7 +3273,7 @@ Note: You can change that in the preferences. Izberite samo stavbne predmete! Lokacijam ni dovoljeno sprejeti drugih predmetov, raze stavbnih. Ostali predmeti bodo odstranjeni iz izbire. -Opomba: To lahko spremenite v možnostih. +Opomba: To lahko spremenite v prednastavitvah. @@ -3411,42 +3411,42 @@ Stavba ne sprejema Lokacije in Stavbe, zato bodo ti predmeti izvzeti iz izbora. To lahko spremenite v nastavitvah. - + Remove highlighted objects from the list above Odstrani označene predmete z zgornjega seznama - + Add selected Dodaj izbrane - + Add selected object(s) to the scope of this section plane Dodaj izbrene predmete v območje te presečne ravnine - + Rotates the plane along the X axis Zasuka ravnino okrog osi X - + Rotates the plane along the Y axis Zasuka ravnino okrog osi Y - + Rotates the plane along the Z axis Zasuka ravnino okrog osi Z - + Resizes the plane to fit the objects in the list above Prevelikosti ravnino tako, da se bo prilega predmetom z zgornjega seznama - + Centers the plane on the objects in the list above Usredini ravnino na predmete z zgornjega seznama @@ -3568,7 +3568,7 @@ To lahko spremenite v nastavitvah. Curtain Wall - Curtain Wall + Steklena fasada @@ -3578,7 +3578,7 @@ To lahko spremenite v nastavitvah. Create Curtain Wall - Create Curtain Wall + Ustvari stekleno fasado @@ -3683,7 +3683,7 @@ To lahko spremenite v nastavitvah. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Datoteke Shape pythonove knjižnice ni bilo mogoče najti v vašem okolju. Ali jo želite prenesti s <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Dana bo v mapo vaših makrov. @@ -3942,12 +3942,12 @@ To lahko spremenite v nastavitvah. Curtain Wall - Curtain Wall + Steklena fasada Creates a curtain wall object from selected line or from scratch - Creates a curtain wall object from selected line or from scratch + Ustvari stekleno fasado iz izbrane črte ali od začetka @@ -3955,22 +3955,22 @@ To lahko spremenite v nastavitvah. Cut with plane - Prereži z ravnino + Reži z ravnino Cut an object with a plane - Prereži predmet z ravnino + Reži predmet z ravnino Cut with a line - Cut with a line + Reži s črto Cut an object with a line with normal workplane - Cut an object with a line with normal workplane + Reži predmet s črto z narmalno delovno ravnino @@ -4080,7 +4080,7 @@ To lahko spremenite v nastavitvah. When in edge midpoint mode, if this grid must reorient its children along edge normals or not - Ko ste v načinu "razpoločišče roba", mora ta mreža preravnati podrejene vzdolž normale roba ali ne + Ko ste v načinu "razpoločišče roba", mora ta mreža preusmeriti podrejenike vzdolž normale roba ali ne @@ -4284,12 +4284,12 @@ To lahko spremenite v nastavitvah. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Iz izbrane ploskve konstrukcije ustvari armaturno palico - + Custom Rebar Armatura po naročilu @@ -4362,12 +4362,12 @@ To lahko spremenite v nastavitvah. Arch_SectionPlane - + Section Plane Presečna ravnina - + Creates a section plane object, including the selected objects Ustvari predmet presečne ravnine, ki vključuje izbrane predmete @@ -4543,7 +4543,7 @@ To lahko spremenite v nastavitvah. The name of the BimServer you are currently connecting to. Change settings in Arch Preferences - Ime BimStrežnika, s katerim se trenutno povezujete. Nastavitve spremenite v Arh Lastnostih + Ime BimStrežnika, s katerim se trenutno povezujete. Nastavitve spremenite v Arh Prednastavitve @@ -4761,12 +4761,12 @@ To lahko spremenite v nastavitvah. If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + Če je omogočeno, bo povezana preglednica z rezultati posodobljena skupaj s popisom Associate spreadsheet - Associate spreadsheet + Poveži preglednico @@ -4815,10 +4815,10 @@ določene lastnosti. (internal names, not labels), to be considered by this operation. If the list contains groups, children will be added. Leave blank to use all objects from the document - An optional semicolon (;) separated list of object names -(internal names, not labels), to be considered by this operation. -If the list contains groups, children will be added. -Leave blank to use all objects from the document + Možen je seznam imen predmetov, ločenih s podpičjem (;) +(nazivi, ne oznake), o čemer je vredno razmisliti pri tem opravilu. +Če seznam vsebuje skupine, bodo dodani podrejeniki. +Pustite prazno, če želite uporabiti vse predmete v dokumentu @@ -5024,7 +5024,7 @@ Leave blank to use all objects from the document The number of segments to divide non-linear edges into, for calculations. If curved shapes overlap, try raising this value - Število odsekov, na katero se za izračunavanje razdeli nepreme robove. Če se krivulje prekrivajo, poskusiti z višanjem vrednosti + Število odsekov, na katero se za izračunavanje razdeli nepreme robove. Če se krivulje prekrivajo, poskusite z višanjem vrednosti @@ -5582,7 +5582,7 @@ Leave blank to use all objects from the document Use IfcOpenShell serializer if available - Če je na voljo, uporabi nizalnik zaporedih IfcOpenShell + Če je na voljo, uporabi IfcOpenShell zaporejevalnik @@ -5855,10 +5855,10 @@ is exported. This leads to smaller differences between file versions. - IFCOpenShell is a library that allows to import IFC files. -Its serializer functionality allows to give it an OCC shape and it will -produce adequate IFC geometry: NURBS, faceted, or anything else. -Note: The serializer is still an experimental feature! + IFCOpenShell je knjižnica, ki omogoča uvažanje datotek IFC. +Njena zmožnost zaporejanja dopušča shranjevanje v obliki OCC, pri čemer +ustvari enakovredne IFC geometrije: NURBS, ploskvične ali katere koli druge. +Opomba: Zaporejevalnik je še vedno zmožnost v preizkušanju! @@ -5967,8 +5967,8 @@ A building storey is not mandatory but a common practice to have at least one in Shows verbose debug messages during import and export of IFC files in the Report view panel - Shows verbose debug messages during import and export -of IFC files in the Report view panel + Prikaže v plošči poročevalnega pogleda podrobni izpis sporočila +o razhroščevanju med uvozom in izvozom datotek IFC @@ -6001,7 +6001,7 @@ Note that this might slow things down. Object names will be prefixed with the IFC ID number - Object names will be prefixed with the IFC ID number + Imenom predmetov bodo dobila predpono s številko ID-ja IFC @@ -6018,12 +6018,12 @@ they will be treated as one. Each object will have their IFC properties stored in a spreadsheet object - Each object will have their IFC properties stored in a spreadsheet object + IFC-lastnosti vsakega predmeta bodo shranjene v ločeni preglednici Import IFC properties in spreadsheet - Import IFC properties in spreadsheet + Uvozi IFC-lastnosti v preglednico diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm index 3629285899..ea6d846ec6 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr.qm and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 44531addf5..9254c2639a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -29,7 +29,7 @@ Стил нумерисања - + The type of this building Тип ове зграде @@ -114,7 +114,7 @@ Израчуната површина пода овог спрата - + The placement of this object Положај овог објекта @@ -204,12 +204,12 @@ The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object The linked object - + The line width of the rendered objects The line width of the rendered objects @@ -504,37 +504,37 @@ Thickness of the flange - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Поглед на - + Create Section Plane Направи деобну раван @@ -2262,7 +2262,7 @@ Направи Рам - + Create Rebar Направи Арматуру @@ -3217,7 +3217,7 @@ Floor creation aborted. Профил - + Please select a base face on a structural object Please select a base face on a structural object @@ -3227,37 +3227,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3414,42 +3414,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3686,7 +3686,7 @@ You can change that in the preferences. The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Python biblioteka nije pronadjena u našem sistemu. Dali želite da preuzmete od <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Biće smešteno u vašu macros fasciklu. @@ -4287,12 +4287,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4365,12 +4365,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index 9f01537e2b..4f1f3aad09 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index 47fe703424..dc12a5e191 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -29,7 +29,7 @@ Numreringsformatet - + The type of this building Typen för denna byggnad @@ -114,7 +114,7 @@ Den beräknade golvarean i denna våning - + The placement of this object Placeringen av detta objekt @@ -204,12 +204,12 @@ Extruderingsriktningsnormalen för detta objekt (låt vara på (0,0,0) för automatisk normal) - + The linked object Det länkade objektet - + The line width of the rendered objects Linjebredden hos de renderade objekten @@ -504,37 +504,37 @@ Tjocklek på flänsen - + The diameter of the bar Diametern på armeringsjärnet - + The distance between the border of the beam and the first bar (concrete cover). Längden mellan kanten på bjälken och det första armeringsjärnet (täckande betongskikt). - + The distance between the border of the beam and the last bar (concrete cover). Längden mellan kanten på bjälken och det sista armeringsjärnet (täckande betongskikt). - + The amount of bars Antalet armeringsjärn - + The spacing between the bars Mellanrummet mellan armeringsjärnen - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Riktningen att använda för att sprida armeringsjärnen. Låt vara (0,0,0) för att använda automatisk riktning. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Avrundningen att applicera på vinkeln av basprofilen. Detta värde multipliceras med diametern på armeringsjärnet. @@ -614,52 +614,52 @@ Kalkylarket att skriva resultatet till - + If false, non-solids will be cut too, with possible wrong results. Om detta är falskt kommer icke-solider att trimmas också, med möjligen felaktigt resultat. - + The display length of this section plane Visningslängden för detta snittplan - + The display height of this section plane Visningshöjden för detta snittplan - + The size of the arrows of this section plane Storleken på pilarna för detta snittplan - + Show the cut in the 3D view Visa trimningen i 3D-vyn - + The rendering mode to use Renderingsläget att använda - + If cut geometry is shown or not Om trimmad geometri ska visas eller inte - + If cut geometry is filled or not Om trimmad geometri ska vara fylld eller inte - + The size of the texts inside this object Storleken på texterna inuti detta objekt - + If checked, source objects are displayed regardless of being visible in the 3D model Om detta är ikryssat kommer källobjekt visas oavsett synlighet i 3D-modellen @@ -1084,12 +1084,12 @@ Listan över lagertjocklekar - + The line color of the projected objects Linjefärgen för de projicerade objekten - + The color of the cut faces (if turned on) Färgen på de trimmade ytorna (om aktiverat) @@ -1169,27 +1169,27 @@ Växlar visningen av träfibertexturen av/på - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Den totala vidden att sprida armeringsjärnen över. Värdet 0 anger automatiskt användning av värdformens storlek. - + List of placement of all the bars Lista med placeringar av alla armeringsjärn - + The structure object that hosts this rebar Strukturobjektet som är värd för detta armeringsjärn - + The custom spacing of rebar Det anpassade avståndet mellan armeringsjärn - + Shape of rebar Form på armeringsjärn @@ -1264,12 +1264,12 @@ Nivån på origo (0,0,0) för denna våning - + The shape of this object Formen på detta objekt - + The line width of this object Linjetjockleken för detta objekt @@ -1364,12 +1364,12 @@ Ett förskjutningsvärde att flytta trimplanet från centrumpunkten - + Length of a single rebar Längd på ett enskilt armeringsjärn - + Total length of all rebars Total längd på alla armeringsjärn @@ -1394,22 +1394,22 @@ Om detta är sant, kommer färgerna från den länkade filen hållas uppdaterade - + The objects that must be considered by this section plane. Empty means the whole document. De objekt som måste beaktas av detta snittplan. Tomt innebär hela dokumentet. - + The transparency of this object Transparensen för detta objekt - + The color of this object Färgen på detta objekt - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Avståndet mellan det snittet och den faktiska vyn av snittet (håll detta värde litet men inte noll) @@ -1629,12 +1629,12 @@ Beskrivning av IFC-attribut är inte implementerat ännu - + If True, resulting views will be clipped to the section plane area. Om Sant, kommer resulterande vyer att klippas till sektionsplanområdet. - + If true, the color of the objects material will be used to fill cut areas. Om sant, kommer färgen på objektets material att användas för att fylla snittområden. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vy över - + Create Section Plane Skapa snittplan @@ -2262,7 +2262,7 @@ Skapa ramverk - + Create Rebar Skapa armeringsjärn @@ -3216,7 +3216,7 @@ Skapande av våning avbruten. Profil - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Skapande av våning avbruten. Skapa extern referens - + Section plane settings Inställningar för sektionsplan - + Objects seen by this section plane: Objekt sedda av detta sektionsplan: - + Section plane placement: Section plane placement: - + Rotate X Rotera X - + Rotate Y Rotera Y - + Rotate Z Rotera Z - + Resize Ändra storlek @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Lägg till markerad - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Skapar ett armeringsjärn från den markerade ytan hos ett strukturobjekt - + Custom Rebar Anpassat armeringsjärn @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Sektionsplan - + Creates a section plane object, including the selected objects Skapar ett avsnitt plan objekt, inklusive de markerade objekten diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index b40012ab76..00029659c1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index 8f5631d58e..4a47adb4d4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -29,7 +29,7 @@ Numaralandırma stili - + The type of this building Bu binanın türü @@ -114,7 +114,7 @@ Bu katın hesaplanan kat alanı - + The placement of this object Bu nesnenin yerleşimi @@ -204,12 +204,12 @@ Bu objenin bormal ekstrüzyon yönü ( Otomatik tanımlamak için (0,0,0) olarak ayarlayın) - + The linked object Bağlantı - + The line width of the rendered objects Render edilen objenin çizgi kalınlığı @@ -504,37 +504,37 @@ Flanş kalınlığı - + The diameter of the bar Çubuk çapı - + The distance between the border of the beam and the first bar (concrete cover). Işın kenarlığını ilk bar (beton kapak) arasındaki uzaklık. - + The distance between the border of the beam and the last bar (concrete cover). Işın kenarlığını ilk bar (beton kapak) arasındaki uzaklık. - + The amount of bars Barların miktarı - + The spacing between the bars Çubuklar arasındaki aralığı - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Barlar yaymak için kullanmak için yön. (0,0,0) için otomatik yön tutun. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Temel Profil açısı uygulamak için fileto. Bu değer barın çarpılır çapı. @@ -614,52 +614,52 @@ Sonuçlarını yazdırmak için elektronik tablo - + If false, non-solids will be cut too, with possible wrong results. Yanlış'sa, katı olmayan olası yanlış sonuçlar ile de kesecek. - + The display length of this section plane Kesit düzlemin ekran boyutu - + The display height of this section plane Kesit düzlemin ekran boyutu - + The size of the arrows of this section plane Bu kesit düzleminin oklarının boyutu - + Show the cut in the 3D view Kesmeyi 3D görünümde gösterin - + The rendering mode to use Kullanılacak işleme modu - + If cut geometry is shown or not Kesme geometrisi gösterilse veya gösterilmezse - + If cut geometry is filled or not Kesim geometrisi doldurulmuş veya doldurulmamışsa - + The size of the texts inside this object Bu nesnenin içindeki metinlerin boyutu - + If checked, source objects are displayed regardless of being visible in the 3D model İşaretlenirse, görünür olmasına bakılmaksızın kaynak nesneler 3D modelde görüntülenir @@ -1084,12 +1084,12 @@ Katman kalınlıklarının listesi - + The line color of the projected objects Yansıtılan nesnelerin rengi - + The color of the cut faces (if turned on) Kesme renk (açık değilse) karşı karşıya @@ -1169,27 +1169,27 @@ Kenar boşluğu açma/kapama görüntülenmesini - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Rebars üzerinde yayılmak üzere toplam mesafe. Otomatik olarak ana bilgisayar şekil boyutu kullanmak için 0 tutun. - + List of placement of all the bars Tüm çubukların yerleşim listesi - + The structure object that hosts this rebar Bu inşaat demirini barındıran yapı nesnesi - + The custom spacing of rebar Inşaat demirinin özel aralığı - + Shape of rebar Inşaat demirinin şekli @@ -1264,12 +1264,12 @@ Bu seviyenin (0,0,0) noktasının seviyesi - + The shape of this object Bu nesnenin şekli - + The line width of this object Bu nesnenin çizgi genişliği @@ -1364,12 +1364,12 @@ Kesme düzlemini Merkez noktasından taşımak için bir öteleme değeri - + Length of a single rebar Tek bir inşaat demiri uzunluğu - + Total length of all rebars Tüm inşaat demiri toplam uzunluğu @@ -1394,22 +1394,22 @@ Doğruysa, bağlı dosyadaki renkler güncellenir - + The objects that must be considered by this section plane. Empty means the whole document. Bu seçim düzlemi tarafından dikkate alınması gereken nesneler. Boş, tüm belgeyi ifade eder. - + The transparency of this object Bu nesnenin saydamlığı - + The color of this object Bu nesnenin rengi - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Kesim düzlemiyle gerçek kesim arasındaki uzaklık (bu değeri sıfır olmayan çok küçük değerde tutun) @@ -1629,12 +1629,12 @@ IFC özellikleri tanımı henüz uygulanmadı - + If True, resulting views will be clipped to the section plane area. Eğer Doğru ise ortaya çıkacak olan görünümler bölüm düzlemine göre kırpılır. - + If true, the color of the objects material will be used to fill cut areas. Eğer Doğru ise kesit alanlarını doldurmak için nesne materyal renkleri kullanılacaktır. @@ -1846,7 +1846,7 @@ The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation - The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation + Referans verilen objelerin geçerli belgeye dahil edilme sekli.'Normal' sekli içerir, 'Geçici' objeyi kapatıldığında siler(dosya boyutunu küçültür),'Hafif' şekli değil, yalnızca OpenInventor temsilini içe aktarır @@ -1876,82 +1876,82 @@ The normal direction of this truss - The normal direction of this truss + "Bu makasın normal yönü" The height of the truss at the start position - The height of the truss at the start position + "Makasın başlangıç noktasına göre yüksekliği" The height of the truss at the end position - The height of the truss at the end position + "Makasın başlangıç noktasına göre yüksekliği" An optional start offset for the top strut - An optional start offset for the top strut + Üst dikme için isteğe bağlı başlangıç dengeleme dikmesi An optional end offset for the top strut - An optional end offset for the top strut + Üst dikme için isteğe bağlı bitiş dengeleme The height of the main top and bottom elements of the truss - The height of the main top and bottom elements of the truss + Kafesin ana üst ve alt elemanlarının yüksekliği The width of the main top and bottom elements of the truss - The width of the main top and bottom elements of the truss + Kafesin ana üst ve alt elemanlarının yüksekliği The type of the middle element of the truss - The type of the middle element of the truss + Kafesin orta elemanının tipi The direction of the rods - The direction of the rods + Çubukların yönü The diameter or side of the rods - The diameter or side of the rods + Çubukların çapı veya kenarı The number of rod sections - The number of rod sections + Çubukların bölümlerinin satısı If the truss has a rod at its endpoint or not - If the truss has a rod at its endpoint or not + Kafesin uç noktasında bir çubuk varsa veya yoksa How to draw the rods - How to draw the rods + Çubuklar nasıl çizilir This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + Bu, her duvar parçasının genişliğini ayarlamak için Genişlik özelliğini geçersiz kılar. temel nesne getWidths () yöntemiyle Genişlikler bilgisi sağlıyorsa yoksayılır. (1. değer, duvarın 1. segmenti için "Genişlik" özelliğini geçersiz kılar; bir değer sıfırsa, "OverrideWidth" ın 1. değeri takip edilir) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + Bu, her duvar parçasının genişliğini ayarlamak için Genişlik özelliğini geçersiz kılar. temel nesne getWidths () yöntemiyle Genişlikler bilgisi sağlıyorsa yoksayılır. (1. değer, duvarın 1. segmenti için "Genişlik" özelliğini geçersiz kılar; bir değer sıfırsa, "OverrideWidth" ın 1. değeri takip edilir) The area of this wall as a simple Height * Length calculation - The area of this wall as a simple Height * Length calculation + Bu duvarın alanı basitçe Yükseklik * Uzunluk olarak hesaplanır @@ -1961,47 +1961,47 @@ An optional host object for this curtain wall - An optional host object for this curtain wall + Sunucu nesne için isteğe bağlı perde duvar The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + Bir kenara dayanıyorsa perde duvarın yüksekliği The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + Herhangi bir profil kullanılmıyorsa dikey kalıpların boyutu The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + Herhangi bir profil kullanılmıyorsa dikey kalıpların boyutu The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + Herhangi bir profil kullanılmıyorsa dikey kalıpların boyutu The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + Herhangi bir profil kullanılmıyorsa dikey kalıpların boyutu An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + Bu sitenin konumu için isteğe bağlı bir EPW Dosyası. Nasıl edinebileceğinizi öğrenmek için Site belgelerine bakın Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Rüzgar gülü diyagramını göster veya gösterme. Güneş diyagram ölçeğini kullanır. Ladybug modülüne ihtiyaç duyar - + The rebar mark - The rebar mark + Rebar işareti @@ -2142,7 +2142,7 @@ Görünümü - + Create Section Plane Kesit Düzlem Oluşturma @@ -2262,7 +2262,7 @@ Çerçeve oluşturma - + Create Rebar İnşaat demiri oluşturun @@ -3206,7 +3206,7 @@ Zemin oluşturma işlemi iptal edildi. Yan görünüm - + Please select a base face on a structural object Lütfen yapısal bir nesne üzerinde bir taban yüzeyi seçin @@ -3216,37 +3216,37 @@ Zemin oluşturma işlemi iptal edildi. Harici referans oluştur - + Section plane settings Seçim düzlemi ayarları - + Objects seen by this section plane: Bu seçim düzlemi tarafından görülen nesneler: - + Section plane placement: Seçim düzlemi yerleşimi: - + Rotate X Döndür X - + Rotate Y Döndür Y - + Rotate Z Döndür Z - + Resize Yeniden boyutlandır @@ -3403,42 +3403,42 @@ Site, yapı ve zemin nesneleri seçimden kaldırılacaktır. Bunu tercihlerde değiştirebilirsiniz. - + Remove highlighted objects from the list above Yukarıdaki listede yer alan vurgulanmış nesneleri kaldır - + Add selected Seçileni ekle - + Add selected object(s) to the scope of this section plane Seçili nesne(leri) bu bölüm düzleminin kapsamına ekle - + Rotates the plane along the X axis Düzlemi X ekseni boyunca döndür - + Rotates the plane along the Y axis Düzlemi Y ekseni boyunca döndür - + Rotates the plane along the Z axis Düzlemi Z ekseni boyunca döndür - + Resizes the plane to fit the objects in the list above Yukarıdaki listede yer alan nesneleri düzlem üzerinde yeniden boyutlandır - + Centers the plane on the objects in the list above Yukarıdaki listede yer alan nesneleri düzlem üzerinde merkezle @@ -3560,27 +3560,27 @@ Bunu tercihlerde değiştirebilirsiniz. Curtain Wall - Curtain Wall + Perde Duvar Please select only one base object or none - Please select only one base object or none + Lütfen sadece bir temel nesne seçiniz Create Curtain Wall - Create Curtain Wall + Perde duvar olusturun Total thickness - Total thickness + Toplam kalınlık depends on the object - depends on the object + nesneye bağlıdır @@ -3590,7 +3590,7 @@ Bunu tercihlerde değiştirebilirsiniz. Unable to recognize that file type - Unable to recognize that file type + Dosya tipi tanınamıyor @@ -3610,7 +3610,7 @@ Bunu tercihlerde değiştirebilirsiniz. Rebar tools - Rebar tools + İnşaat demiri araçları @@ -3635,47 +3635,47 @@ Bunu tercihlerde değiştirebilirsiniz. Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Hangi alanın şeklin yüksekliklerini sağladığını seçin: No shape found in this file - No shape found in this file + Dosyada veri bulunamadı Shapefile module not found - Shapefile module not found + Shapefile modülü bulunamadı Error: Unable to download from: - Error: Unable to download from: + Hata: İndirilemiyor: Could not download shapefile module. Aborting. - Could not download shapefile module. Aborting. + Shapefile modülü indirilemedi. iptal ediliyor. Shapefile module not downloaded. Aborting. - Shapefile module not downloaded. Aborting. + Shapefile modülü indirilmedi. İptal ediliyor. Shapefile module not found. Aborting. - Shapefile module not found. Aborting. + Shapefile modülü bulunmadı. İptal ediliyor. The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + Shapefile kitaplığı aşağıdaki URL' den indirilebilir ve makrolar klasörünüze yüklenebilir: The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Shapafile python arşivi sisteminizde bulunamadı. Simdi buradan indirmek ister misiniz<a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Sizin makro klasörünüze yerleştirilecektir. @@ -3934,12 +3934,12 @@ Bunu tercihlerde değiştirebilirsiniz. Curtain Wall - Curtain Wall + Perde Duvar Creates a curtain wall object from selected line or from scratch - Creates a curtain wall object from selected line or from scratch + Seçili çizgi yada sıfırdan perde duvar nesnesi oluşturun @@ -3962,7 +3962,7 @@ Bunu tercihlerde değiştirebilirsiniz. Cut an object with a line with normal workplane - Cut an object with a line with normal workplane + Normal çalışma düzlemine ve çizgiye sahip bir nesneyi kesin @@ -4001,7 +4001,7 @@ Bunu tercihlerde değiştirebilirsiniz. Creates a Building Part object that represents a level, including selected objects - Creates a Building Part object that represents a level, including selected objects + Seçili nesneler dahil olmak üzere bir seviyeyi temsil eden bir Yapı Parçası nesnesi oluşturur @@ -4047,7 +4047,7 @@ Bunu tercihlerde değiştirebilirsiniz. The type of 3D points produced by this grid object - Bu kılavuz nesne tarafından üretilen 3D Puan türü + Bu ızgara nesnesi tarafından üretilen 3B noktaların türü @@ -4257,7 +4257,7 @@ Bunu tercihlerde değiştirebilirsiniz. Creates a profile object - Creates a profile object + Bir profil objesi olusturur @@ -4270,18 +4270,18 @@ Bunu tercihlerde değiştirebilirsiniz. Creates a project entity aggregating the selected sites. - Creates a project entity aggregating the selected sites. + Seçili konumları toplayan bir poroje varliğı olusturur. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Yapısal bir nesne seçili yüzünden bir takviye çubuğu oluşturur - + Custom Rebar Özel inşaat demiri @@ -4354,12 +4354,12 @@ Bunu tercihlerde değiştirebilirsiniz. Arch_SectionPlane - + Section Plane Bölüm düzlemi - + Creates a section plane object, including the selected objects Seçili nesneleri de dahil olmak üzere bir bölüm uçak nesnesi oluşturur @@ -4491,7 +4491,7 @@ Bunu tercihlerde değiştirebilirsiniz. Creates a truss object from selected line or from scratch - Creates a truss object from selected line or from scratch + Seçili çizgi yada sıfırdan kafes nesnesi oluşturun @@ -4738,7 +4738,7 @@ Bunu tercihlerde değiştirebilirsiniz. Schedule name: - Schedule name: + Çizelge adı: @@ -4748,27 +4748,27 @@ Bunu tercihlerde değiştirebilirsiniz. An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) - An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) + Ortaya çıkan değeri ifade etmek için isteğe bağlı bir birim. Örnek: m^3(m³ yada m3 yazabilirsin) If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + Bu devre dışı ise ilişkili hesap tablosunun içerdiği sonuçlar program nesnesiyle birlikte muhafaza edilecektir Associate spreadsheet - Associate spreadsheet + Hesap tablosu ilişkilendir If this is turned on, additional lines will be filled with each object considered. If not, only the totals. - If this is turned on, additional lines will be filled with each object considered. If not, only the totals. + Eğer bu açıksa, dikkate alınan her nesne için ek satırlar doldurulacaktır. Değilse, yalnızca toplamlar doldurulacaktır. Detailed results - Detailed results + Detaylı sonuçlar @@ -4783,7 +4783,7 @@ Bunu tercihlerde değiştirebilirsiniz. Add selection - Add selection + Seçim ekleyin @@ -4804,15 +4804,15 @@ a certain property. (internal names, not labels), to be considered by this operation. If the list contains groups, children will be added. Leave blank to use all objects from the document - An optional semicolon (;) separated list of object names -(internal names, not labels), to be considered by this operation. -If the list contains groups, children will be added. -Leave blank to use all objects from the document + İsteğe bağlı noktalı virgül(;) nesne isimleri objesini ayırır(iç isimler, etiketler değil), bu operasyon tarafından dikkate alınacaktır. Eğer liste gurup içeriyorsa alt öğeler eklenecektir. +Belgedeki tüm nesneleri kullanmak için boş bırakın <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>isteğe bağlı noktalı virgül(;) listenin özellik:değer filtrelerini ayırır. +Filtrenin etkilerinin tersine çevirmek için basına ünlem(!) koyun(fitreyle uyusan objeleri dışlar). +Özelliği değeri içeren nesneler eşleşecek.Geçersiz filtre örneği(her şey büyük-küçük harf duyarsızdır):</p><p><span style=" font-weight:600;">İsim:Duvar</span>-Sadece &quot;duvar&quot; içermeyen objeleri dikkate alır etiketlerinde</p><p><span style=" font-weight:600;">ifcType:Duvar</span>Sadace IFC tipi &quot;Duvar&quot; olan objeleri dikkate alır</p><p><span style=" font-weight:600;">!TAG:Duvar</span>sadece etiketi &quot;Duvar&quot; OLMAYAN objeleri dikate alır</p><p>bu bölgeyi boş bırakırsanız filtre uygulsnmaz</p></body></html> @@ -4825,17 +4825,17 @@ Leave blank to use all objects from the document Draft creation tools - Draft creation tools + Taslak hazırlama araçları Draft annotation tools - Draft annotation tools + Taslak açıklama araçları Draft modification tools - Draft modification tools + Taslak düzenleme araçları @@ -5008,7 +5008,7 @@ Leave blank to use all objects from the document Closer than this, two points are considered equal - Bu, daha yakın iki puan eşit kabul edilir + Bundan daha yakın, iki nokta eşit kabul edilir @@ -5053,7 +5053,7 @@ Leave blank to use all objects from the document Total thickness - Total thickness + Toplam kalınlık @@ -5726,12 +5726,12 @@ Leave blank to use all objects from the document If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. - If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. + Seçili ise bir Mimari objesinin materyali olduğunda nesne materyalin rengini alacak. Bu her obje tarafından geçersiz kılınabilir. Use material color as shape color - Use material color as shape color + Materyal rengini şekil rengi olarak kullanın @@ -5750,33 +5750,31 @@ a Footprint display mode The URL of a bim server instance (www.bimserver.org) to connect to. - The URL of a bim server instance (www.bimserver.org) to connect to. + Bağlanmak için bim sunucusu örneğinin URL'si (www.bimserver.org). If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - If this is selected, the "Open BimServer in browser" -button will open the Bim Server interface in an external browser -instead of the FreeCAD web workbench + Eğer bu işaretliyse, "BimServer'ı Tarayıcıda aç" düğmesi, Bim Server (Sunucu) arayüzünü, FreeCAD web çalışma tezgahı yerine harici bir tarayıcıda açar All dimensions in the file will be scaled with this factor - All dimensions in the file will be scaled with this factor + Bu dosyadaki tüm boyutlar bu faktör ile ölçeklenecektir Meshing program that should be used. If using Netgen, make sure that it is available. - Meshing program that should be used. -If using Netgen, make sure that it is available. + Kullanılması gereken örgüleme programı.. +Netgen kullanılır ise mevcut olduğundan emin ol. Tessellation value to use with the Builtin and the Mefisto meshing program. - Tessellation value to use with the Builtin and the Mefisto meshing program. + Yerleşik ve mefisto meshers ile kullanmak için Mozaik değeri. @@ -5790,53 +5788,53 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Maximum number of segments per edge - Maximum number of segments per edge + Kenar başına en fazla parça sayısı Number of segments per radius - Number of segments per radius + Yarıçap basına parça sayısı Allow a second order mesh - Allow a second order mesh + İkinci derece kefese izin verin Allow quadrilateral faces - Allow quadrilateral faces + Dört kenarlı yüzleri onaylayın IFC export - IFC export + IFC Dışa aktar Show this dialog when exporting - Show this dialog when exporting + Dışa aktarırken bu diyaloğu gösterin Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. -Use this to force all objects to be exported as BREP geometry. + Bazı IFC görüntüleyicileri ekstrüzyon olarak dışa aktarılan nesneleri sevmez. +Tüm nesneleri BREP geometrisi ile dışa aktarmayı zorlar. When exporting objects without unique ID (UID), the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported. This leads to smaller differences between file versions. - When exporting objects without unique ID (UID), the generated UID -will be stored inside the FreeCAD object for reuse next time that object -is exported. This leads to smaller differences between file versions. + Benzersiz kimliği (UID) olmayan nesneleri dışa aktarırken, oluşturulan UID +FreeCAD nesnesinin içinde bir dahaki sefere yeniden kullanım için saklanacaktır. +Bu, dosya sürümleri arasında daha küçük farklılıklara sebep olur. Store IFC unique ID in FreeCAD objects - Store IFC unique ID in FreeCAD objects + FreeCAD nesnelerinde IFC benzersiz ID' si saklayın @@ -6079,10 +6077,10 @@ If this is checked, an additional calculation is done to join coplanar facets. - The type of objects that you wish to export: -- Standard model: solid objects. -- Structural analysis: wireframe model for structural calculations. -- Standard + structural: both types of models. + Dışarı aktarmak istediğiniz obje tipleri: +-Standart model: katı obje. +-Yapısal analiz: yapısal hesaplamalar için tel kafes görünümü. +-Standart +yapısal: her iki model türü. @@ -6092,12 +6090,10 @@ Note that IFC files are ALWAYS written in metric units; imperial units are only a conversion factor applied on top of them. However, some BIM applications will use this factor to choose which unit to work with when opening the file. - The units you want your IFC file to be exported to. + IFC dosyanızın dışa aktarılmasını istediğiniz birimler. -Note that IFC files are ALWAYS written in metric units; imperial units -are only a conversion factor applied on top of them. -However, some BIM applications will use this factor to choose which -unit to work with when opening the file. +IFC dosyaları her zaman metrik birimle yazılır; Kraliyet(İngiliz) birimlerine sadece dönuüsüm faktörü uygulanır. +Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular. @@ -6109,19 +6105,20 @@ for example, 3 if you have a 4-core CPU. Set it to 1 to use multicore mode in single-core mode; this is safer if you start getting crashes when you set multiple cores. - EXPERIMENTAL -The number of cores to use in multicore mode. -Keep 0 to disable multicore mode. -The maximum value should be your number of cores minus 1, -for example, 3 if you have a 4-core CPU. + DENEYSEL +çok çekirdekli modda kulanılacak çekirdek sayısı. +Çok çekirdek modunu devre dışı bırakmak için 0 da bırakın. +Maximum değer çekirdek sayısı eksi 1 olmalıdır, +örnek olarak 4 çekirdeğe sahipseniz 3 olmalıdır. -Set it to 1 to use multicore mode in single-core mode; this is safer -if you start getting crashes when you set multiple cores. +tek çekirdek modunda çok çekirdek kullanmak için 1 yapınız; +eğer çok çekirdek yaptığınızda uygulama çöküyorsa bu daha +güvenlidir. Number of cores to use (experimental) - Number of cores to use (experimental) + Kullanılacak çekirdeklerin sayısı(deneysel) @@ -6129,15 +6126,16 @@ if you start getting crashes when you set multiple cores. objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Bu seçenek seçili ise, +varsayılan 'Proje', 'Site', 'Bina' ve 'Katlar' +genellikle bir IFC dosyasında bulunan nesneler içe aktarılmaz ve tüm nesneler +bunun yerine bir 'Grup'a yerleştirilir. +'Binalar' ve 'Katlar' birden fazlaysa içeri aktarılır. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + "Proje", "Site", "Bina" ve "Kat" yerine "Grup" yazın @@ -6168,7 +6166,7 @@ are placed in a 'Group' instead. Creation - Creation + Oluştur @@ -6178,7 +6176,7 @@ are placed in a 'Group' instead. Modification - Modification + Değiştir diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index f5e6df522a..a7e3ad6ad3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index 9b51bf3852..99641a3f45 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -29,7 +29,7 @@ Стиль нумерації - + The type of this building Тип цієї будівлі @@ -114,7 +114,7 @@ Обчислена площа цього поверху - + The placement of this object Розміщення цього об'єкта @@ -204,12 +204,12 @@ Нормальний напрямок видавлювання для цього об'єкта (залишити (0,0,0) для завдання автоматичної нормалі) - + The linked object Пов'язаний об'єкт - + The line width of the rendered objects Товщина лінії відтворюваних об'єктів @@ -504,37 +504,37 @@ Товщина фланця - + The diameter of the bar The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars The amount of bars - + The spacing between the bars The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -614,52 +614,52 @@ The spreadsheet to print the results to - + If false, non-solids will be cut too, with possible wrong results. If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane Довжина відображення цієї площини перерізу - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane Розмір стрілок цієї площини перерізу - + Show the cut in the 3D view Показати розріз в 3D перегляді - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -1084,12 +1084,12 @@ Перелік товщин шарів - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Вид - + Create Section Plane Створити площину розрізу @@ -2262,7 +2262,7 @@ Створити каркас - + Create Rebar Створити арматуру @@ -3216,7 +3216,7 @@ Floor creation aborted. Профіль - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Поверхня перерізу - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm index 25702e07b0..069fbf531e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index 19e0f1bc91..6858018b42 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -29,7 +29,7 @@ L'estil de numeració - + The type of this building El tipus d'edifici @@ -114,7 +114,7 @@ L'àrea calculada d'aquesta planta - + The placement of this object La posició d'aquest objecte @@ -204,12 +204,12 @@ La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The linked object L'objecte enllaçat - + The line width of the rendered objects L'amplària de la línia dels objectes renderitzats @@ -504,37 +504,37 @@ Gruix de l'ala - + The diameter of the bar El diàmetre de la barra - + The distance between the border of the beam and the first bar (concrete cover). La distància entre la vora de la biga i la primera barra (coberta de formigó). - + The distance between the border of the beam and the last bar (concrete cover). La distància entre la vora de la biga i l'última barra (coberta de formigó) - + The amount of bars La quantitat de barres - + The spacing between the bars L'espaiat entre les barres - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. La direcció que s'ha d'utiñitzar per a estendre les barres. Mantín (0,0,0) per a direcció automàtica. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. L'arredoniment que s'ha d'aplicar a l'angle del perfil de base. Aquest valor es multiplica pel diámetre de la barra. @@ -614,52 +614,52 @@ El full de càlcul en què s'imprimeixen els resultats - + If false, non-solids will be cut too, with possible wrong results. Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longitud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D @@ -1084,12 +1084,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1169,27 +1169,27 @@ Activa/desactiva la visualització de la textura de veta - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. La distància total per a estendre les armadures corrugades per damunt. Manteniu 0 per a utilitzar automàticament la mida de la forma amfitrió. - + List of placement of all the bars Llista d'emplaçaments de totes les barres - + The structure object that hosts this rebar L'objecte estructura que allotja aquesta armadura corrugada - + The custom spacing of rebar L'espaiat personalitzat de l'armadura corrugada - + Shape of rebar Forma de l'armadura corrugada @@ -1264,12 +1264,12 @@ El nivell del punt (0,0,0) en aquest nivell - + The shape of this object La forma d'aquest objecte - + The line width of this object L'amplària de la línia d'aquest objecte @@ -1364,12 +1364,12 @@ Un valor de desplaçament per a moure el pla de tall des del punt central - + Length of a single rebar Llargària d'una única armadura corrugada - + Total length of all rebars Llargària total de totes les armadures corrugades @@ -1394,22 +1394,22 @@ Si és cert, els colors del fitxer enllaçat es mantindran actualitzats - + The objects that must be considered by this section plane. Empty means the whole document. Els documents que el pla de secció ha de tindre en compte. Buit significa el document sencer. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distància entre el pla de tall i la vista real del tall (manteniu aquest valor molt baix però no a zero) @@ -1629,12 +1629,12 @@ No s'ha implementat encara la descripció dels atributs IFC - + If True, resulting views will be clipped to the section plane area. Si es cert, les vistes que en resulten es retallaran en la zona del pla de la secció. - + If true, the color of the objects material will be used to fill cut areas. Si és cert, el color dels objectes s'utilitzarà per a emplenar les zones retallades. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Vista de - + Create Section Plane Crea un pla de secció @@ -2262,7 +2262,7 @@ Crea un marc - + Create Rebar Crea una armadura corrugada @@ -3199,7 +3199,7 @@ Floor creation aborted. Perfil - + Please select a base face on a structural object Seleccioneu una cara base en un objecte d'estructura @@ -3209,37 +3209,37 @@ Floor creation aborted. Crea una referència externa - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vistos en aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Gira X - + Rotate Y Gira Y - + Rotate Z Gira Z - + Resize Canvia la mida @@ -3390,42 +3390,42 @@ You can change that in the preferences. Podeu col·locar qualsevol cosa en un objecte Construcció excepte els objectes Lloc i Construcció ja que els objectes Construcció no els accepta. Els objectes Lloc i Construcció s'eliminaran de la selecció. Podeu canviar açò en les preferències. - + Remove highlighted objects from the list above Elimina els objectes ressaltats de la llista anterior - + Add selected Afig el seleccionat - + Add selected object(s) to the scope of this section plane Afig l'objecte o els objectes seleccionats a l'àmbit d'aquest pla de secció - + Rotates the plane along the X axis Gira el pla al llarg de l'eix X - + Rotates the plane along the Y axis Gira el pla al llarg de l'eix Y - + Rotates the plane along the Z axis Gira el pla al llarg de l'eix Z - + Resizes the plane to fit the objects in the list above Canvia la mida del pla per a ajustar els objectes en la llista anterior - + Centers the plane on the objects in the list above Centra el pla sobre els objectes de la llista anterior @@ -4263,12 +4263,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra d'armadura de la cara seleccionada d'un objecte estructural - + Custom Rebar Armadura corrugada personalitzada @@ -4341,12 +4341,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Pla de secció - + Creates a section plane object, including the selected objects Crea un pla de secció incloent-hi els objectes seleccionats diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.qm b/src/Mod/Arch/Resources/translations/Arch_vi.qm index 25598eb912..9addf2284e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_vi.qm and b/src/Mod/Arch/Resources/translations/Arch_vi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index e824b84b93..76e9597a92 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -29,7 +29,7 @@ Kiểu đánh số thứ tự - + The type of this building Loại công trình @@ -114,7 +114,7 @@ Phần diện tích tính toán của tầng này - + The placement of this object Vị trí của đối tượng này @@ -204,12 +204,12 @@ Hướng đùn thông thường của đối tượng này (giữ mặc định ở (0,0,0)) - + The linked object Đối tượng được liên kết - + The line width of the rendered objects Độ dày của các đối tượng được hiển thị @@ -504,37 +504,37 @@ Chiều dày của bản cánh - + The diameter of the bar Đường kính cốt thép - + The distance between the border of the beam and the first bar (concrete cover). Khoảng cách từ mép dầm đến thanh cốt thép đầu tiên (có lớp bê tông bao bọc). - + The distance between the border of the beam and the last bar (concrete cover). Khoảng cách từ mép dầm đến thanh cốt thép cuối cùng (có lớp bê tông bao bọc). - + The amount of bars Số lượng thanh cốt thép - + The spacing between the bars Khoảng cách giữa các thanh cốt thép - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. Hướng để lắp đặt các thanh cốt thép. Giữ điểm (0,0,0) cho hướng tự động. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. Độ vê tròn các góc của bề mặt đáy. Giá trị này được nhân với đường kính thanh cốt thép. @@ -614,52 +614,52 @@ Bảng tính để in kết quả - + If false, non-solids will be cut too, with possible wrong results. Nếu sai, những vật không phải chất rắn cũng sẽ bị cắt, với kết quả sai nhất có thể. - + The display length of this section plane Chiều dài hiển thị của mặt cắt này - + The display height of this section plane Chiều cao hiển thị của mặt cắt này - + The size of the arrows of this section plane Kích thước mũi tên chỉ hướng của mặt cắt này - + Show the cut in the 3D view Hiển thị vết cắt ở chế độ xem 3D - + The rendering mode to use Chế độ hình chiếu để sử dụng - + If cut geometry is shown or not Nếu hình cắt có được hiển thị hay không - + If cut geometry is filled or not Nếu hình cắt có được lấp đầy hay không - + The size of the texts inside this object Kích thước của các văn bản bên trong bộ phận này - + If checked, source objects are displayed regardless of being visible in the 3D model Nếu được chọn, các đối tượng sẽ hiển thị bất kể chúng có hiển thị trong mô hình 3D hay không @@ -1084,12 +1084,12 @@ Danh sách của chiều dày các lớp - + The line color of the projected objects Màu đường của các đối tượng được chiếu - + The color of the cut faces (if turned on) Màu sắc của các mặt cắt (nếu kích hoạt) @@ -1169,27 +1169,27 @@ Bật hoặc tắt hiển thị kết cấu khắc gỗ - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. Tổng khoảng cách để kéo dài các thanh cốt thép. Đặt 0 để tự động sử dụng kích thước hình dạng của thép chủ. - + List of placement of all the bars Danh sách vị trí của tất cả các thanh - + The structure object that hosts this rebar Đối tượng cấu trúc chứa thanh cốt thép này - + The custom spacing of rebar Không gian tùy chỉnh của thanh cốt thép - + Shape of rebar Hình dạng thanh cốt thép @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object Hình dạng của bộ phận này - + The line width of this object Chiều dài đường vẽ của bộ phận này @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Chiều dài của một thanh cốt thép đơn lẻ - + Total length of all rebars Tổng chiều dài của tất cả các thanh cốt thép @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Độ trong suốt của đối tượng này - + The color of this object Màu sắc của đối tượng này - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Khoảng cách giữa mặt phẳng được cắt và chế độ xem cắt thực tế (giữ giá trị rất nhỏ nhưng không bằng 0) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ Hình, dạng của - + Create Section Plane Tạo mặt cắt @@ -2262,7 +2262,7 @@ Tạo khung - + Create Rebar Tạo thanh cốt thép @@ -3215,7 +3215,7 @@ Việc tạo tầng bị gián đoạn. Cấu hình - + Please select a base face on a structural object Hãy chọn một mặt cơ sở trên một bộ phận kết cấu @@ -3225,37 +3225,37 @@ Việc tạo tầng bị gián đoạn. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3412,42 +3412,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Thêm đối tượng đã chọn - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4285,12 +4285,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Tạo một thanh cốt thép từ bề mặt được chọn của một đối tượng kết cấu - + Custom Rebar Thanh cốt thép tùy chỉnh @@ -4363,12 +4363,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane Mặt phẳng cắt - + Creates a section plane object, including the selected objects Tạo một đối tượng mặt phẳng cắt bao gồm những đối tượng đã chọn diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index 077ccd1f64..7051c3cfdc 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index f7904e993e..191c721daa 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -29,7 +29,7 @@ 编号样式 - + The type of this building 此建筑的类型 @@ -114,7 +114,7 @@ 地板的计算面积 - + The placement of this object 此对象的位置 @@ -204,12 +204,12 @@ 该对象的法向拉伸方向((0,0,0)表示自动法向) - + The linked object 链接的对象 - + The line width of the rendered objects 着色对象的线宽 @@ -504,37 +504,37 @@ 法兰盘厚度 - + The diameter of the bar 栏的直径 - + The distance between the border of the beam and the first bar (concrete cover). 梁与第一条的栏之间的距离 (混凝土盖)。 - + The distance between the border of the beam and the last bar (concrete cover). 梁的边界和最后一个杆 (混凝土盖) 之间的距离。 - + The amount of bars 栏的数量 - + The spacing between the bars 栏之间的间距 - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. 用于延伸栏的方向。保持 (00, 0) 自动方向。 - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. 要应用在底部轮廓角度的圆角。此值是栏直径的倍数。 @@ -614,52 +614,52 @@ 要将结果打印到上面的电子表格 - + If false, non-solids will be cut too, with possible wrong results. 如果是假的, 非固态的也会被剪切, 可能会有错误的结果。 - + The display length of this section plane 此剖面的显示长度 - + The display height of this section plane 此剖面平面的显示高度 - + The size of the arrows of this section plane 此剖面箭头的大小 - + Show the cut in the 3D view 在3D 视图中显示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 几何属性是否显示 - + If cut geometry is filled or not 几何属性是否填充 - + The size of the texts inside this object 此对象内文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果选中, 则无论在3D 模型中是否可见, 都将显示源对象 @@ -1084,12 +1084,12 @@ 层厚度列表 - + The line color of the projected objects 投影对象的线条颜色 - + The color of the cut faces (if turned on) 剪切面的颜色 (如果打开) @@ -1169,27 +1169,27 @@ 打开/关闭木纹纹理的显示 - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. 跨越钢筋的总距离。保留0以自动使用主机形状大小。 - + List of placement of all the bars 所有条形图的位置列表 - + The structure object that hosts this rebar 承载此钢筋的结构对象 - + The custom spacing of rebar 钢筋的自定义间距 - + Shape of rebar 钢筋形状 @@ -1264,12 +1264,12 @@ 此级别的(0,0,0) 点的级别 - + The shape of this object 此对象的形状 - + The line width of this object 此对象的线条宽度 @@ -1364,12 +1364,12 @@ 将截图器从中心点移动的偏移值 - + Length of a single rebar 单个螺纹钢筋的长度 - + Total length of all rebars 所有螺纹钢筋的总长度 @@ -1394,22 +1394,22 @@ 如果为真，链接文件中的颜色将保持更新 - + The objects that must be considered by this section plane. Empty means the whole document. 此剖切平面需考虑的物体. 空表示文档中所有物体. - + The transparency of this object 此对象的透明度 - + The color of this object 此对象的颜色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切割平面和实际视图切割之间的距离 (保持一个非常小的值, 但不是零) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark The rebar mark @@ -2142,7 +2142,7 @@ 视图 - + Create Section Plane 创建剖切面 @@ -2262,7 +2262,7 @@ 创建框架 - + Create Rebar 创建螺纹钢 @@ -3215,7 +3215,7 @@ Floor creation aborted. 轮廓 - + Please select a base face on a structural object 请在构造对象上选择一个基面 @@ -3225,37 +3225,37 @@ Floor creation aborted. 创建外部引用 - + Section plane settings 截面平面设置 - + Objects seen by this section plane: 剖面中所看到的对象: - + Section plane placement: 截面平面放置: - + Rotate X 沿 X 轴旋转 - + Rotate Y 旋转 Y - + Rotate Z 绕Z轴旋转 - + Resize 调整尺寸 @@ -3412,42 +3412,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected 添加所选 - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3614,7 +3614,7 @@ You can change that in the preferences. Arch - Arch + 建筑 @@ -3624,12 +3624,12 @@ You can change that in the preferences. Create profile - Create profile + 创建配置文件 Profile settings - Profile settings + 设置配置文件 @@ -4285,12 +4285,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object 以所选定的面或结构对象创建钢筋 - + Custom Rebar 定制钢筋 @@ -4363,12 +4363,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 剖切平面 - + Creates a section plane object, including the selected objects 创建剖切平面对象,包括所选对象 @@ -5943,12 +5943,12 @@ A building storey is not mandatory but a common practice to have at least one in IFC file units - IFC file units + IFC 文件单位 Metric - Metric + 公制 @@ -5963,7 +5963,7 @@ A building storey is not mandatory but a common practice to have at least one in Show this dialog when importing - Show this dialog when importing + 导入时显示此对话框 @@ -6180,7 +6180,7 @@ are placed in a 'Group' instead. Creation - Creation + 创建 @@ -6190,7 +6190,7 @@ are placed in a 'Group' instead. Modification - Modification + 修改 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index d79612fc7d..0dc11c90da 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 1d4a020b4c..55d0ad9d65 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -29,7 +29,7 @@ 編號樣式 - + The type of this building 這個建築的類型 @@ -114,7 +114,7 @@ 這個樓層的計算樓面面積 - + The placement of this object 這個對象的位置 @@ -204,12 +204,12 @@ 該對象的法向拉伸方向(保持 (0,0,0) 表示自動法向) - + The linked object 鏈接的對象 - + The line width of the rendered objects 著色對象的線寬 @@ -504,37 +504,37 @@ 法蘭盤厚度 - + The diameter of the bar 欄的直徑 - + The distance between the border of the beam and the first bar (concrete cover). 梁與第一個欄之間的距離 (混凝土保護層)。 - + The distance between the border of the beam and the last bar (concrete cover). 梁的邊界和最後一個欄 (混凝土保護層) 之間的距離。 - + The amount of bars 欄的數量 - + The spacing between the bars 欄之間的間距 - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. 用於延伸欄的方向。保持 (0,0,0) 自動方向。 - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. 要應用在底部輪廓角度的圓角。此值是欄直徑的倍數。 @@ -614,52 +614,52 @@ 要將結果列印到的試算表上 - + If false, non-solids will be cut too, with possible wrong results. 如果是假的，非固態的也會被剪切，可能會有錯誤的結果。 - + The display length of this section plane 此剖面的顯示長度 - + The display height of this section plane 此剖面的顯示高度 - + The size of the arrows of this section plane 此剖面箭頭的大小 - + Show the cut in the 3D view 在3 D 視圖中顯示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 是否顯示修剪幾何 - + If cut geometry is filled or not 修剪幾何是否填充 - + The size of the texts inside this object 此對象內文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果選中，則無論在 3D 模型中是否可見，都將顯示源對象 @@ -1084,12 +1084,12 @@ 層厚度清單 - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) 修剪面的顏色 (如果打開) @@ -1169,27 +1169,27 @@ Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars List of placement of all the bars - + The structure object that hosts this rebar The structure object that hosts this rebar - + The custom spacing of rebar The custom spacing of rebar - + Shape of rebar Shape of rebar @@ -1264,12 +1264,12 @@ The level of the (0,0,0) point of this level - + The shape of this object The shape of this object - + The line width of this object The line width of this object @@ -1364,12 +1364,12 @@ An offset value to move the cut plane from the center point - + Length of a single rebar Length of a single rebar - + Total length of all rebars Total length of all rebars @@ -1394,22 +1394,22 @@ If true, the colors from the linked file will be kept updated - + The objects that must be considered by this section plane. Empty means the whole document. The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1629,12 +1629,12 @@ Description of IFC attributes are not yet implemented - + If True, resulting views will be clipped to the section plane area. If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. If true, the color of the objects material will be used to fill cut areas. @@ -1999,7 +1999,7 @@ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark 螺紋符號 @@ -2142,7 +2142,7 @@ 視圖 - + Create Section Plane 建立剖面 @@ -2262,7 +2262,7 @@ Create Frame - + Create Rebar 建立鋼筋 @@ -3216,7 +3216,7 @@ Floor creation aborted. 外觀 - + Please select a base face on a structural object Please select a base face on a structural object @@ -3226,37 +3226,37 @@ Floor creation aborted. Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3413,42 +3413,42 @@ Site and Building objects will be removed from the selection. You can change that in the preferences. - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -4286,12 +4286,12 @@ You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar Custom Rebar @@ -4364,12 +4364,12 @@ You can change that in the preferences. Arch_SectionPlane - + Section Plane 剖面 - + Creates a section plane object, including the selected objects 建立剖面物件,包含選擇的物件 diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_af.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_af.qm index 0dcd86e45b..d651be8f81 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_af.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_af.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ar.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ar.qm index cc86d89836..70a1f5348d 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ar.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ar.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.qm index 6e7e048786..b5a25df20a 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.qm index 32882f789d..fa99e6455b 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm index 68f0024237..9c745a1bf6 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.qm index 6f28d1a3cd..343ab2ea8c 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.qm index 4e64dd02a3..fec2d10e22 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.qm index 66bed897f3..b6cd24fe1b 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.qm index 10e0620b1d..4f95e67344 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fil.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fil.qm index d690ac86a5..c0028bfeeb 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fil.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fil.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.qm index 17b7edb863..ad4b8cdf87 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_gl.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_gl.qm index a1891a33d4..2e2a621eaa 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_gl.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_gl.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.qm index d15d60322b..d37fe5bfce 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm index 5990a6cb79..c4dde63385 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_id.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_id.qm index c797852643..c0df1a383b 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_id.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_id.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.qm index 5d82a2d89e..fbbfff7c08 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.qm index a6960d8f93..a7cb952769 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_kab.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_kab.qm index 33242d2a69..ea6007e333 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_kab.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_kab.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm index ebb47e2b33..8dfd66f1e8 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_lt.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_lt.qm index dc5496a745..2665286b12 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_lt.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_lt.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.qm index 849bdefa88..56546d393f 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_no.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_no.qm index 6eb34a4bd1..727a3e9272 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_no.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_no.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm index a2c6971ca5..a4a8800603 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts index a466e07693..40070c1ba3 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts @@ -6,7 +6,7 @@ Constraints - Ograniczenia + Wiązania diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.qm index 6c8832ae0a..06afbfe3b4 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-PT.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-PT.qm index 654f137252..8d3611a4e6 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-PT.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-PT.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.qm index d917da844d..ef2d56e9e8 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.qm index 53e9926512..fda2b167b4 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sk.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sk.qm index d16730a8cf..16519f898a 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sk.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sk.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.qm index f3a83f59de..d6b6f98e57 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts index ccdf1210c4..f387ecd449 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts @@ -305,7 +305,7 @@ <html><head/><body><p>Fixes the first geometry in its rotation and translation. Note that fix only works its the direct parent assembly. If you stack assemblies, the parent assembly will not be fixed inside the other ones.</p></body></html> - <html><head/><body><p>Popravlja prvo geometrijo pri njenem sukanju in premiku. Vedite, da popravek deluje le na sestavljanje neposrednega nadrejenika. Če zlagate sestavine, nadrejeni sklop ne bo popravljen znotraj drugih.</p></body></html> + <html><head/><body><p>Zamrzne prvo geometrijo pri njenem sukanju in premiku. Vedite, da zamrznitev deluje le na sestavljanje neposrednega nadrejenika. Če zlagate sestavine, nadrejeni sklop ne bo zamrznjen znotraj drugih.</p></body></html> diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm index 544e781047..b839cff56a 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.qm index 510c7f6c8c..ee8dc84244 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.qm index af189eed50..f4af19ddb4 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.qm index 70a9f199da..db69764c27 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_val-ES.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_val-ES.qm index 0aca5fe3ce..21436f8e30 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_val-ES.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_val-ES.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_vi.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_vi.qm index 3bb00fb99f..f544ad3959 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_vi.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_vi.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.qm index b9f1c81493..76189ba529 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.qm index b81c24bc14..54d1017eb3 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.qm b/src/Mod/Draft/Resources/translations/Draft_af.qm index fb59b8d3be..28efff6678 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_af.qm and b/src/Mod/Draft/Resources/translations/Draft_af.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.ts b/src/Mod/Draft/Resources/translations/Draft_af.ts index e91abd62a7..4f396851a4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_af.ts +++ b/src/Mod/Draft/Resources/translations/Draft_af.ts @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.qm b/src/Mod/Draft/Resources/translations/Draft_ar.qm index 7f5b135ebb..f7c5f529b8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ar.qm and b/src/Mod/Draft/Resources/translations/Draft_ar.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.ts b/src/Mod/Draft/Resources/translations/Draft_ar.ts index 1d684af7e8..b923d1bf9c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ar.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ar.ts @@ -16,12 +16,12 @@ Add new... - Add new... + إضافة جديدة... Renames the selected style - Renames the selected style + إعادة تسمية العنصر المحدد @@ -31,7 +31,7 @@ Deletes the selected style - Deletes the selected style + حذف العنصر المحدد @@ -51,7 +51,7 @@ Line spacing - Line spacing + تباعد الأسطر @@ -61,7 +61,7 @@ The font to use for texts and dimensions - The font to use for texts and dimensions + الخط المراد استخدامه للنصوص والأبعاد @@ -71,27 +71,27 @@ Scale multiplier - Scale multiplier + مضاعفات الحجم Decimals - Decimals + عشري Unit override - Unit override + تجاوز الوحدة Show unit - Show unit + عرض الوحدات Line and arrows - Line and arrows + خطوط وأسهم @@ -101,7 +101,7 @@ Extension overshoot - Extension overshoot + تجاوز الإضافات @@ -111,12 +111,12 @@ Show lines - Show lines + إظهار الخطوط Dimension overshoot - Dimension overshoot + تجاوز الأبعاد @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index c4c38daa16..08107839fd 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index 2fbc11bb75..78385c9704 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -2221,6 +2221,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Estil d'exportació SVG desconegut, s'està canviant a Traduït + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index dcf41cff10..3a43175633 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 75381342d2..79577fbbee 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -6,7 +6,7 @@ Annotation Styles Editor - Annotation Styles Editor + Editor stylů poznámek @@ -51,7 +51,7 @@ Line spacing - Line spacing + Řádkování @@ -61,7 +61,7 @@ The font to use for texts and dimensions - The font to use for texts and dimensions + Písmo používané pro texty a rozměry @@ -71,17 +71,17 @@ Scale multiplier - Scale multiplier + Koeficient měřítka Decimals - Decimals + Desetinná místa Unit override - Unit override + Přepsat jednotky @@ -91,7 +91,7 @@ Line and arrows - Line and arrows + Čára a šipky @@ -101,7 +101,7 @@ Extension overshoot - Extension overshoot + Přesah vynášecí čáry @@ -111,17 +111,17 @@ Show lines - Show lines + Zobrazit čáry Dimension overshoot - Dimension overshoot + Přesah kótovací čáry Extension lines - Extension lines + Vynášecí čáry @@ -131,12 +131,12 @@ Line / text color - Line / text color + Barva čáry / textu The width of the dimension lines - The width of the dimension lines + Šířka kótovacích čar @@ -146,7 +146,7 @@ The color of dimension lines, arrows and texts - The color of dimension lines, arrows and texts + Barva kótovacích čar, šipek a textu @@ -166,67 +166,67 @@ The name of your style. Existing style names can be edited. - The name of your style. Existing style names can be edited. + Název vašeho stylu. Názvy existujících stylů mohou být upraveny. Font size in the system units - Font size in the system units + Velikost písma v systémových jednotkách Line spacing in system units - Line spacing in system units + Řádkování v jednotkách systému A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + Koeficient, který ovlivňuje velikost textů a značek The number of decimals to show for dimension values - The number of decimals to show for dimension values + Počet desetinných míst zobrazených u kót Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Zadejte platnou jednotku délky jako jsou mm, m, ft, která bude přímo zobrazena u kóty If it is checked it will show the unit next to the dimension value - If it is checked it will show the unit next to the dimension value + Je-li zaškrtnuto, zobrazí se u kóty jednotka The distance that the extension lines are additionally extended beyond the dimension line - The distance that the extension lines are additionally extended beyond the dimension line + Vzdálenost, o kterou vynášecí čáry přesahují kótovací čáru The size of the dimension arrows or markers in system units - The size of the dimension arrows or markers in system units + Velikost kótovacích šipek nebo značek v systémových jednotkách If it is checked it will display the dimension line - If it is checked it will display the dimension line + Je-li zaškrtnuto, zobrazí se kótovací čára The distance that the dimension line is additionally extended - The distance that the dimension line is additionally extended + Vzdálenost, o kterou je kótovací čára dodatečně prodloužena The length of the extension lines - The length of the extension lines + Délka vynášecích čar The type of arrows or markers to use at the end of dimension lines - The type of arrows or markers to use at the end of dimension lines + Typ šipek nebo značek na konci kótovacích čar @@ -258,7 +258,7 @@ z menu Nástroje -> Manažer doplňků Draft utility tools - Draft utility tools + Pomůcky Návrhu @@ -278,7 +278,7 @@ z menu Nástroje -> Manažer doplňků &Utilities - &Nástroje + &Pomůcky @@ -302,8 +302,8 @@ z menu Nástroje -> Manažer doplňků The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Souřadnice bodu, kterým prochází osa otáčení. +Změňte směr osy v editoru vlastností. @@ -328,7 +328,7 @@ Change the direction of the axis itself in the property editor. Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. + Resetovat souřadnice středu rotace. @@ -339,8 +339,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Je-li zaškrtnuto, výsledné objekty v poli budou sloučeny, pokud se vzájemně dotýkají. +Funguje pouze v případě, že je vypnuto "Spojené pole". @@ -351,30 +351,29 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Je-li zaškrtnuto, výsledný objekt bude "Spojené pole" namísto běžného pole. +Spojené pole je efektivnější při vytváření více kopií, ale nemůže být sloučeno. Link array - Link array + Spojené pole Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. - Distance from one element in one ring of the array to the next element in the same ring. -It cannot be zero. + Vzdálenost od jednoho prvku k druhému na stejné kružnici. Nemůže být nula. Tangential distance - Tangential distance + Tangenciální vzdálenost Distance from one layer of objects to the next layer of objects. - Distance from one layer of objects to the next layer of objects. + Vzdálenost od jedné vrstvy objektů k další vrstvě objektů. @@ -384,19 +383,19 @@ It cannot be zero. The number of symmetry lines in the circular array. - The number of symmetry lines in the circular array. + Počet os souměrnosti v kruhovém poli. Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. - Number of circular layers or rings to create, including a copy of the original object. -It must be at least 2. + Počet kruhových vrstev nebo kružnic, které budou vytvořeny, včetně kopie původního objektu. +Musí být alespoň 2. Number of circular layers - Number of circular layers + Počet kruhových vrstev @@ -406,7 +405,7 @@ It must be at least 2. (Placeholder for the icon) - (Placeholder for the icon) + (Zástupce ikony) @@ -414,16 +413,16 @@ It must be at least 2. Orthogonal array - Orthogonal array + Orthogonální pole Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Z direction. -Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Vzdálenost mezi prvky ve směru Z. +Obvykle je nutná pouze hodnota Z; další dvě hodnoty udávají dodatečné posunutí v příslušných směrech. +Záporné hodnoty vytvoří kopie v záporném směru. @@ -459,8 +458,8 @@ Negative values will result in copies produced in the negative direction. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Je-li zaškrtnuto, výsledné objekty v poli budou sloučeny, pokud se vzájemně dotýkají. +Funguje pouze v případě, že je vypnuto "Spojené pole". @@ -471,27 +470,27 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Je-li zaškrtnuto, výsledný objekt bude "Spojené pole" namísto běžného pole. +Spojené pole je efektivnější při vytváření více kopií, ale nemůže být sloučeno. Link array - Link array + Spojené pole (Placeholder for the icon) - (Placeholder for the icon) + (Zástupce ikony) Distance between the elements in the X direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the X direction. -Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Vzdálenost mezi prvky ve směru X. +Obvykle je nutná pouze hodnota X; další dvě hodnoty udávají dodatečné posunutí v příslušných směrech. +Záporné hodnoty vytvoří kopie v záporném směru. @@ -508,31 +507,31 @@ Negative values will result in copies produced in the negative direction.Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Y direction. -Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Vzdálenost mezi prvky ve směru Y. +Obvykle je nutná pouze hodnota Y; další dvě hodnoty udávají dodatečné posunutí v příslušných směrech. +Záporné hodnoty vytvoří kopie v záporném směru. Y intervals - Y intervals + Intervaly Y Reset Y - Reset Y + Obnovit Y Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. - Number of elements in the array in the specified direction, including a copy of the original object. -The number must be at least 1 in each direction. + Počet prvků v poli v určeném směru, včetně kopie původního objektu. +Číslo musí být alespoň 1 v každém směru. Number of elements - Number of elements + Počet prvků @@ -540,14 +539,14 @@ The number must be at least 1 in each direction. Polar array - Polar array + Polární pole The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Souřadnice bodu, kterým prochází osa otáčení. +Změňte směr osy v editoru vlastností. @@ -572,7 +571,7 @@ Change the direction of the axis itself in the property editor. Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. + Resetovat souřadnice středu rotace. @@ -583,8 +582,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Je-li zaškrtnuto, výsledné objekty v poli budou sloučeny, pokud se vzájemně dotýkají. +Funguje pouze v případě, že je vypnuto "Spojené pole". @@ -595,44 +594,44 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Je-li zaškrtnuto, výsledný objekt bude "Spojené pole" namísto běžného pole. +Spojené pole je efektivnější při vytváření více kopií, ale nemůže být sloučeno. Link array - Link array + Spojené pole Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. - Sweeping angle of the polar distribution. -A negative angle produces a polar pattern in the opposite direction. -The maximum absolute value is 360 degrees. + Úhel vysunutí polární distribuce. +Záporný úhel vytvoří polární vzor v opačném směru. +Maximální absolutní hodnota je 360 stupňů. Polar angle - Polar angle + Polární úhel Number of elements in the array, including a copy of the original object. It must be at least 2. - Number of elements in the array, including a copy of the original object. -It must be at least 2. + Počet prvků v poli, včetně kopie původního objektu. +Musí být alespoň 2. Number of elements - Number of elements + Počet prvků (Placeholder for the icon) - (Placeholder for the icon) + (Zástupce ikony) @@ -703,61 +702,61 @@ It must be at least 2. Working plane setup - Working plane setup + Nastavení pracovní roviny Select a face or working plane proxy or 3 vertices. Or choose one of the options below - Select a face or working plane proxy or 3 vertices. -Or choose one of the options below + Vyberte plochu nebo náhradní pracovní rovinu nebo 3 vrcholy. +Nebo vyberte jednu z níže uvedených možností Sets the working plane to the XY plane (ground plane) - Sets the working plane to the XY plane (ground plane) + Nastaví pracovní rovinu na rovinu XY (rovinu země) Top (XY) - Top (XY) + Horní (XY) Sets the working plane to the XZ plane (front plane) - Sets the working plane to the XZ plane (front plane) + Nastaví pracovní rovinu na rovinu XZ (přední rovina) Front (XZ) - Front (XZ) + Přední (XZ) Sets the working plane to the YZ plane (side plane) - Sets the working plane to the YZ plane (side plane) + Nastaví pracovní rovinu na rovinu YZ (boční rovina) Side (YZ) - Side (YZ) + Boční (YZ) Sets the working plane facing the current view - Sets the working plane facing the current view + Nastaví pracovní rovinu proti k aktuálnímu pohledu Align to view - Align to view + Zarovnat k pohledu The working plane will align to the current view each time a command is started - The working plane will align to the current -view each time a command is started + Pracovní rovina se zarovná k aktuálnímu +pohledu pokaždé, když je spuštěn příkaz @@ -769,9 +768,9 @@ view each time a command is started An optional offset to give to the working plane above its base position. Use this together with one of the buttons above - An optional offset to give to the working plane -above its base position. Use this together with one -of the buttons above + Volitelný posun pracovní roviny +nad její základní polohou. Použijte společně s jedním z +výše uvedených tlačítek @@ -783,9 +782,9 @@ of the buttons above If this is selected, the working plane will be centered on the current view when pressing one of the buttons above - If this is selected, the working plane will be -centered on the current view when pressing one -of the buttons above + Je-li vybráno, pracovní rovina bude při stisknutí jednoho +výše uvedeného tlačítka +vystředěna do aktuálního pohledu @@ -797,28 +796,28 @@ of the buttons above Or select a single vertex to move the current working plane without changing its orientation. Then, press the button below - Or select a single vertex to move the current -working plane without changing its orientation. -Then, press the button below + Nebo vyberte jeden vrchol pro přesunutí aktuální +pracovní roviny beze změny její orientace. +Poté stiskněte tlačítko níže Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view - Moves the working plane without changing its -orientation. If no point is selected, the plane -will be moved to the center of the view + Přesune pracovní rovinu beze změny její +orientace. Pokud není vybrán žádný bod, bude rovina +přesunuta do středu pohledu Move working plane - Move working plane + Přesunout pracovní rovinu The spacing between the smaller grid lines - The spacing between the smaller grid lines + Vzdálenost mezi menšími čarami mřížky @@ -828,7 +827,7 @@ will be moved to the center of the view The number of squares between each main line of the grid - The number of squares between each main line of the grid + Počet čtverců mezi hlavními čarami mřížky @@ -847,27 +846,27 @@ value by using the [ and ] keys while drawing Snapping radius - Snapping radius + Poloměr přichytávání Centers the view on the current working plane - Centers the view on the current working plane + Vystředí pohled na aktuální pracovní rovinu Center view - Center view + Vycentrovat pohled Resets the working plane to its previous position - Resets the working plane to its previous position + Resetuje pracovní rovinu na její předchozí pozici Previous - Previous + Předchozí @@ -875,7 +874,7 @@ value by using the [ and ] keys while drawing General Draft Settings - Obecné návrh nastavení + Obecné nastavení Návrhu @@ -900,7 +899,7 @@ value by using the [ and ] keys while drawing Global copy mode - globální režim kopírování + Globální režim kopírování @@ -1238,7 +1237,7 @@ such as "Arial:Bold" Color - Color + Barva @@ -1683,24 +1682,24 @@ such as "Arial:Bold" The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. - The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + Počet desetinných míst souřadnic (např. 3 = 0,001) pro vnitřní operace. Hodnoty mezi 6 a 8 jsou pro uživatele FreeCADu obvykle nejlepším kompromisem. This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Toto je hodnota používaná funkcemi, které mají dovolenou odchylku. +Hodnoty s rozdíly pod touto hodnotou budou považovány za stejné. Tato hodnota bude brzy zastaralá, takže výše uvedený stupeň přesnosti kontroluje obojí. Use legacy python exporter - Use legacy python exporter + Použít původní export pomocí pythonu If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 - If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19 + Je-li tato volba nastavena, při vytváření objektů Návrhu na existující ploše jiného objektu, vlastnost "Podpora / Support" objektu Návrhu bude nastavena na vybraný objekt. Toto bylo standardní chování před verzí FreeCADu 0.19 @@ -1710,7 +1709,7 @@ Values with differences below this value will be treated as same. This value wil In-Command Shortcuts - In-Command Shortcuts + Zkratky vnitřních příkazů @@ -1720,7 +1719,7 @@ Values with differences below this value will be treated as same. This value wil R - R + R @@ -1730,7 +1729,7 @@ Values with differences below this value will be treated as same. This value wil T - T + T @@ -1740,7 +1739,7 @@ Values with differences below this value will be treated as same. This value wil O - O + O @@ -1750,17 +1749,17 @@ Values with differences below this value will be treated as same. This value wil P - P + P Subelement Mode - Subelement Mode + Režim sub-elementu D - D + D @@ -1770,7 +1769,7 @@ Values with differences below this value will be treated as same. This value wil L - L + L @@ -1785,22 +1784,22 @@ Values with differences below this value will be treated as same. This value wil Select Edge - Select Edge + Výběr hrany E - E + E Add Hold - Add Hold + Přidat pomocný bod Q - Q + Q @@ -1810,7 +1809,7 @@ Values with differences below this value will be treated as same. This value wil H - H + H @@ -1820,7 +1819,7 @@ Values with differences below this value will be treated as same. This value wil W - W + W @@ -1830,47 +1829,47 @@ Values with differences below this value will be treated as same. This value wil U - U + U Cycle Snap - Cycle Snap + Cyklovat přichycení ` - ` + ` Snap - Snap + Přichytit S - S + S Increase Radius - Increase Radius + Zvětšit poloměr [ - [ + [ Decrease Radius - Decrease Radius + Zmenšit poloměr ] - ] + ] @@ -1905,107 +1904,105 @@ Values with differences below this value will be treated as same. This value wil Grid color - Grid color + Barva mřížky If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too. - If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too. + Je-li zaškrtnuto, v rozbalovacím menu vrstev se zobrazí také skupiny, což umožňuje automaticky přidávat objekty do skupin. Show groups in layers list drop-down button - Show groups in layers list drop-down button + Zobrazit skupiny v seznamu vrstev v rozbalovacím menu Draft tools options - Draft tools options + Možnosti nástrojů Návrhu When drawing lines, set focus on Length instead of X coordinate. This allows to point the direction and type the distance. - When drawing lines, set focus on Length instead of X coordinate. -This allows to point the direction and type the distance. + Při kreslení čar se nastaví kurzor na Délku namísto souřadnice X. +To umožňuje určit směr a zadat vzdálenost. Set focus on Length instead of X coordinate - Set focus on Length instead of X coordinate + Nastavit kurzor na Délku namísto souřadnice X Set the Support property when possible - Set the Support property when possible + Nastavit vlastnost Podpora, pokud je to možné If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe - If this is checked, objects will appear as filled by default. -Otherwise, they will appear as wireframe + Je-li zaškrtnuto, objekty se objeví vyplněné. Jinak budou ve výchozím nastavení drátěné Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - Normally, after copying objects, the copies get selected. -If this option is checked, the base objects will be selected instead. + Normálně jsou po kopírování objektů vybrány kopie. Je-li tato možnost zaškrtnuta, tak jsou místo toho vybrány původní objekty. If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode - If this is checked, copy mode will be kept across command, -otherwise commands will always start in no-copy mode + Je-li zaškrtnuto, režim kopírování bude zachován napříč příkazem, +jinak budou příkazy vždy spuštěny v režimu bez kopírování Force Draft Tools to create Part primitives instead of Draft objects. Note that this is not fully supported, and many object will be not editable with Draft Modifiers. - Force Draft Tools to create Part primitives instead of Draft objects. -Note that this is not fully supported, and many object will be not editable with Draft Modifiers. + Nástroje Návrhu budou vytvářet primitivy Dílů místo objektů Návrhu. +Všimněte si, že toto není plně podporováno a mnoho objektů nebude možno upravit modifikátory Návrhu. User interface settings - User interface settings + Nastavení uživatelského rozhraní Enable draft statusbar customization - Enable draft statusbar customization + Povolit přizpůsobení stavového řádku návrhu Draft Statusbar - Draft Statusbar + Stavový řádek návrhu Enable snap statusbar widget - Enable snap statusbar widget + Zobrazit stavový řádek úchopů Draft snap widget - Draft snap widget + Widget úchopů Enable draft statusbar annotation scale widget - Enable draft statusbar annotation scale widget + Zobrazit stavový řádek návrhu pro měřítko poznámek Annotation scale widget - Annotation scale widget + Widget měřítka poznámek Draft Edit preferences - Draft Edit preferences + Nastavení editace Návrhu @@ -2015,22 +2012,22 @@ Note that this is not fully supported, and many object will be not editable with Maximum number of contemporary edited objects - Maximum number of contemporary edited objects + Maximální počet současně upravovaných objektů <html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html> - <html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html> + <html><head/><body><p>Nastaví maximální počet objektů, které je možno upravovat v Návrhu současně</p></body></html> Draft edit pick radius - Draft edit pick radius + Poloměr pro výběr Controls pick radius of edit nodes - Controls pick radius of edit nodes + Určuje poloměr výběru pro úpravu uzlů @@ -2249,6 +2246,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 0ad0b20643..81b0cb9640 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index b82e7a95eb..2bd506c575 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -61,7 +61,7 @@ The font to use for texts and dimensions - Die Schriftart für Texte und Abmessungen + Die Schriftart für Text- und Maßeinträge @@ -116,7 +116,7 @@ Dimension overshoot - Maßlinie-Überstand + Maßlinienüberstand @@ -1338,7 +1338,7 @@ such as "Arial:Bold" Show the unit suffix in dimensions - Zeige das Einheiten-Suffix in den Bemaßungen + Zeige Maße mit Maßeinheiten an @@ -1623,7 +1623,7 @@ such as "Arial:Bold" Dimension line overshoot - Maßlinie Verlängerung + Maßlinienüberstand @@ -2242,6 +2242,11 @@ Dieser Wert ist die maximale Segmentlänge. Unknown SVG export style, switching to Translated Unbekannter SVG-Export-Stil wird auf Übersetzte umgestellt + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft @@ -2755,7 +2760,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Selects an existing edge to be measured by this dimension - Wählt eine vorhandene Kante aus, die durch diese Bemaßung beschrieben wird + Zur Auswahl einer vorhandenen Kante, die bemaßt werden soll diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 8b515ee8e4..e4b5c3238f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index 4c02cbb844..5cb2d0db04 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -2251,6 +2251,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index 71b6b3d845..5970b1d68c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 215f403206..17c85590d6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -2245,6 +2245,11 @@ Este valor es la longitud máxima del segmento. Unknown SVG export style, switching to Translated Estilo de exportación SVG desconocido, cambiando a Traducido + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 4b38370c7d..2986f161c2 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index eaa6b0341e..39c1f80a0f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -201,32 +201,32 @@ The distance that the extension lines are additionally extended beyond the dimension line - The distance that the extension lines are additionally extended beyond the dimension line + Luzapen-lerroak zein distantziara luzatzen diren kota-lerrotik haratago The size of the dimension arrows or markers in system units - The size of the dimension arrows or markers in system units + Kota-gezien edo -markatzaileen tamaina sistema-unitatetan If it is checked it will display the dimension line - If it is checked it will display the dimension line + Markatuta badago, kota-lerroa bistaratuko da The distance that the dimension line is additionally extended - The distance that the dimension line is additionally extended + Kota-lerroa zein distantziara luzatzen den The length of the extension lines - The length of the extension lines + Luzatze-lerroen luzera The type of arrows or markers to use at the end of dimension lines - The type of arrows or markers to use at the end of dimension lines + Kota-lerroen amaieran erabiliko diren gezien edo markatzaileen mota @@ -2208,12 +2208,12 @@ Balio hau segmentu-luzera maximoa da. If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border - If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border + Markatuta badago, ertz gehigarria bistaratuko da saretaren inguruan, lauki nagusiaren tamaina beheko ezkerreko ertzean erakutsita Show grid border - Show grid border + Erakutsi saretaren ertza @@ -2236,6 +2236,11 @@ Balio hau segmentu-luzera maximoa da. Unknown SVG export style, switching to Translated SVGa esportatzeko estilo ezezaguna, 'Itzulia' aukerara aldatuko da + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index d473777a7c..d2f11fd4f3 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index 9e6587d92e..1c6d73a66f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -11,12 +11,12 @@ Style name - Style name + Tyylin nimi Add new... - Add new... + Lisää uusi... @@ -71,12 +71,12 @@ Scale multiplier - Scale multiplier + Mittakaavan kerroin Decimals - Decimals + Desimaalit @@ -91,7 +91,7 @@ Line and arrows - Line and arrows + Viiva ja nuolet @@ -1493,7 +1493,7 @@ such as "Arial:Bold" Import options - Import options + Tuontiasetukset @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm index 63cfbc45b8..91c96504a4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index 16db8fca38..71dd884f02 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 9d12f70f47..f3caf3e56a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 77fad1877a..d98cad17ba 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -2245,6 +2245,11 @@ Cette valeur est la longueur maximale du segment. Unknown SVG export style, switching to Translated Style d'exportation SVG inconnu, changer de méthode + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 511901a308..046270113c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index 3b7b30cfe3..5fb74c4b6b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index c5094d8a88..91f1faff67 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 4a1dfaa8de..8354171d8b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -166,67 +166,81 @@ The name of your style. Existing style names can be edited. - The name of your style. Existing style names can be edited. + Ime vašeg stila. Postojeća imena stilova mogu se uređivati. + + Font size in the system units - Font size in the system units + Veličina pisma u jedinicama sustava Line spacing in system units - Line spacing in system units + Razmak linija u jedinicama sustava A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + Faktor množenja koji utječe na veličinu teksta i markera The number of decimals to show for dimension values - The number of decimals to show for dimension values + Broj decimala koji će se prikazati za vrijednosti dimenzija + + Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Navedite važeću jedinicu duljine kao što su mm, m, in, ft, da biste prisilili na prikaz vrijednosti dimenzija u ovoj jedinici + + If it is checked it will show the unit next to the dimension value - If it is checked it will show the unit next to the dimension value + Ako je označen, prikazat će se jedinica pored vrijednosti dimenzije The distance that the extension lines are additionally extended beyond the dimension line - The distance that the extension lines are additionally extended beyond the dimension line + Udaljenost koju produžne crte dodatno produžuju izvan dimenzijske crte + + The size of the dimension arrows or markers in system units - The size of the dimension arrows or markers in system units + Veličina strelica ili markera dimenzija u jedinicama sustava + + If it is checked it will display the dimension line - If it is checked it will display the dimension line + Ako je označen, prikazat će liniju dimenzije The distance that the dimension line is additionally extended - The distance that the dimension line is additionally extended + Udaljenost koju linija dodatno produžuje + + The length of the extension lines - The length of the extension lines + Duljina linija produžetka The type of arrows or markers to use at the end of dimension lines - The type of arrows or markers to use at the end of dimension lines + Vrsta strelica ili markera koje treba koristiti na kraju dimenzijskih linija + + @@ -2254,12 +2268,14 @@ Ova vrijednost je maksimalna duljina segmenta. If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border - If checked, an additional border is displayed around the grid, showing the main square size in the bottom left border + Ako je potvrđeno, oko rešetke se prikazuje dodatan obrub koji u donjem lijevom obrubu prikazuje veličinu glavnog kvadrata + + Show grid border - Show grid border + Pokaži obrub rešetke @@ -2282,6 +2298,11 @@ Ova vrijednost je maksimalna duljina segmenta. Unknown SVG export style, switching to Translated Nepoznati SVG stil izvoza, prebacivanje na Prevedeno + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 0bc832a538..8c4f4f6b1b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 7078d4c0aa..3342515c49 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -61,7 +61,7 @@ The font to use for texts and dimensions - A szövegekhez és méretezésekhez használt betütípus + A szövegekhez és méretekhez használt betűtípus @@ -101,7 +101,7 @@ Extension overshoot - Meghoszabbítás túllépése + Meghosszabbítás túllépése @@ -121,7 +121,7 @@ Extension lines - Meghoszabbító vonalak + Meghosszabbító vonalak @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index c5e1060ccf..c69868522c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index ded4ede2a3..f180b2c36f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -6,22 +6,22 @@ Annotation Styles Editor - Annotation Styles Editor + Editor Gaya Anotasi Style name - Style name + Nama gaya Add new... - Add new... + Tambah baru... Renames the selected style - Renames the selected style + Ubah nama item yang dipilih @@ -31,7 +31,7 @@ Deletes the selected style - Deletes the selected style + Hapus item yang dipilih @@ -51,7 +51,7 @@ Line spacing - Line spacing + Jarak baris @@ -61,7 +61,7 @@ The font to use for texts and dimensions - The font to use for texts and dimensions + Font yang digunakan untuk teks dan dimensi @@ -71,27 +71,27 @@ Scale multiplier - Scale multiplier + Pengganda skala Decimals - Decimals + Desimal Unit override - Unit override + Penggantian unit Show unit - Show unit + Tampilkan satuan Line and arrows - Line and arrows + Garis dan Panah @@ -111,7 +111,7 @@ Show lines - Show lines + Tampilkan baris @@ -530,7 +530,7 @@ The number must be at least 1 in each direction. Number of elements - Number of elements + Jumlah elemen @@ -613,7 +613,7 @@ The maximum absolute value is 360 degrees. Polar angle - Polar angle + Sudut polar @@ -625,7 +625,7 @@ It must be at least 2. Number of elements - Number of elements + Jumlah elemen @@ -2247,6 +2247,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 22ca4c3f72..efd9136b27 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index ca4d68d485..332ca755ac 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -2249,6 +2249,11 @@ Questo valore è la lunghezza massima del segmento. Unknown SVG export style, switching to Translated Stile di esportazione SVG sconosciuto, verrà esportato come Tradotto + + + The export list contains no object with a valid bounding box + L'elenco di esportazione non contiene alcun oggetto con un contenitore di delimitazione valido + draft @@ -2806,7 +2811,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. Current working plane - Piano di lavoro corrente + Piano di lavoro attuale diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index efce40496d..218cd7202b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 8b3741e09c..5cb3646dd7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -116,7 +116,7 @@ Dimension overshoot - Dimension overshoot + 寸法線の超過量 @@ -338,8 +338,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 +この機能は「リンク整列」がオフの場合にのみ動作します。 @@ -350,8 +350,8 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 +複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 @@ -458,8 +458,8 @@ Negative values will result in copies produced in the negative direction. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 +この機能は「リンク整列」がオフの場合にのみ動作します。 @@ -470,8 +470,8 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 +複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 @@ -582,8 +582,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 +この機能は「リンク整列」がオフの場合にのみ動作します。 @@ -594,8 +594,8 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 +複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 @@ -748,7 +748,7 @@ Or choose one of the options below Align to view - Align to view + ビュー方向へ調整 @@ -792,18 +792,17 @@ of the buttons above Or select a single vertex to move the current working plane without changing its orientation. Then, press the button below - Or select a single vertex to move the current -working plane without changing its orientation. -Then, press the button below + または頂点を1つ選択して、現在の +作業平面を方向を変えずに移動。 +次に下のボタンを押してください。 Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view - Moves the working plane without changing its -orientation. If no point is selected, the plane -will be moved to the center of the view + 方向を変えずに作業平面を移動。 +点が選択されていない場合には平面はビューの中心へ移動します。 @@ -813,7 +812,7 @@ will be moved to the center of the view The spacing between the smaller grid lines - The spacing between the smaller grid lines + グリッドの細線の間隔 @@ -823,7 +822,7 @@ will be moved to the center of the view The number of squares between each main line of the grid - The number of squares between each main line of the grid + グリッドの各主線の間の四角形の数 @@ -835,9 +834,8 @@ will be moved to the center of the view The distance at which a point can be snapped to when approaching the mouse. You can also change this value by using the [ and ] keys while drawing - The distance at which a point can be snapped to -when approaching the mouse. You can also change this -value by using the [ and ] keys while drawing + マウスが近づいた時にスナップされる点までの距離。 +製図中に [ キー、] キーを使用して変更することもできます。 @@ -862,7 +860,7 @@ value by using the [ and ] keys while drawing Previous - Previous + 戻る @@ -1932,14 +1930,13 @@ This allows to point the direction and type the distance. Set the Support property when possible - Set the Support property when possible + 可能な場合にはサポート・プロパティーを設定 If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe - If this is checked, objects will appear as filled by default. -Otherwise, they will appear as wireframe + チェックされている場合、オブジェクトはデフォルトと同様、塗りつぶし表示されます。それ以外の場合はワイヤーフレーム表示されます。 @@ -2234,7 +2231,12 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated - Unknown SVG export style, switching to Translated + 未知の SVG エクスポートスタイルです。変換モードに切り替えます。 + + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box @@ -2846,7 +2848,7 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた Trim distance - Trim distance + トリム距離 diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.qm b/src/Mod/Draft/Resources/translations/Draft_kab.qm index dd5e364181..7583d3b1f7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_kab.qm and b/src/Mod/Draft/Resources/translations/Draft_kab.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.ts b/src/Mod/Draft/Resources/translations/Draft_kab.ts index dbd6756ebe..759e931cd2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_kab.ts +++ b/src/Mod/Draft/Resources/translations/Draft_kab.ts @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index 35c7ee9863..2bcde004a2 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index f109eb35b1..c14ffd2589 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm index 05cb98db27..0a900002cb 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index 933af56dae..a90b9819a5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -2251,6 +2251,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index fdb6dedd7e..5946bcbad4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 82f1fa26d8..875e323218 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -2247,6 +2247,11 @@ Deze waarde is de maximale segmentlengte. Unknown SVG export style, switching to Translated Onbekende SVG-exportstijl, overschakelen naar Vertaald + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_no.qm b/src/Mod/Draft/Resources/translations/Draft_no.qm index fa6fe27531..b7407fa600 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_no.qm and b/src/Mod/Draft/Resources/translations/Draft_no.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_no.ts b/src/Mod/Draft/Resources/translations/Draft_no.ts index ac84496b72..d113897d49 100644 --- a/src/Mod/Draft/Resources/translations/Draft_no.ts +++ b/src/Mod/Draft/Resources/translations/Draft_no.ts @@ -51,7 +51,7 @@ Line spacing - Line spacing + Linjeavstand @@ -61,7 +61,7 @@ The font to use for texts and dimensions - The font to use for texts and dimensions + Skriften som skal brukes for tekst og dimensjoner @@ -71,12 +71,12 @@ Scale multiplier - Scale multiplier + Skala multiplikator Decimals - Decimals + Desimaler @@ -86,12 +86,12 @@ Show unit - Show unit + Vis enhet Line and arrows - Line and arrows + Linje og piler @@ -111,7 +111,7 @@ Show lines - Show lines + Vis linjer @@ -136,7 +136,7 @@ The width of the dimension lines - The width of the dimension lines + Bredden på linjene for dimensjonering @@ -156,7 +156,7 @@ Arrow - Arrow + Pil @@ -171,27 +171,27 @@ Font size in the system units - Font size in the system units + Størrelse på skrift i systemenhetene Line spacing in system units - Line spacing in system units + Linjeavstand i systemenheter A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + En multiplikatorfaktor som påvirker størrelsen på tekster og markører The number of decimals to show for dimension values - The number of decimals to show for dimension values + Antall desimaler som skal vises for dimensjoneringsverdier Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Angi en gyldig lengdeenhet som mm, m, mot venstre, for å tvinge visning av dimensjonsverdien i denne enheten @@ -211,7 +211,7 @@ If it is checked it will display the dimension line - If it is checked it will display the dimension line + Hvis den er merket vil den vise dimensjonslinjen @@ -278,7 +278,7 @@ from menu Tools -> Addon Manager &Utilities - &Utilities + &Verktøy @@ -308,7 +308,7 @@ Change the direction of the axis itself in the property editor. Center of rotation - Center of rotation + Rotasjonssenter @@ -379,12 +379,12 @@ It cannot be zero. Radial distance - Radial distance + Radial avstand The number of symmetry lines in the circular array. - The number of symmetry lines in the circular array. + Antall symmetrilinjer i den sirkulære listen. @@ -414,21 +414,21 @@ It must be at least 2. Orthogonal array - Orthogonal array + Ortogonal matrise Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Z direction. -Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Avstand mellom elementene i Z-retningen +Normalt er det bare behov for Z-verdien. De to andre verdiene kan gi en ekstra skift i de respektive retningene. +Negative verdier vil resultere i kopier som er produsert i negativ retning. Z intervals - Z intervals + Z-intervaller @@ -448,12 +448,12 @@ Negative values will result in copies produced in the negative direction. Reset the distances. - Reset the distances. + Tilbakestill avstandene. Reset Z - Reset Z + Tilbakestille Z @@ -496,43 +496,43 @@ Negative values will result in copies produced in the negative direction. X intervals - X intervals + X-intervaller Reset X - Reset X + Tilbakestille X Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Y direction. -Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Avstand mellom elementene i Y-retningen +Normalt er det bare nødvendig med Y-verdien. De to andre verdiene kan gi en ekstra skift i de respektive retningene. +Negative verdier vil resultere i kopier som er produsert i negativ retning. Y intervals - Y intervals + Y-intervaller Reset Y - Reset Y + Tilbakestille Y Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. - Number of elements in the array in the specified direction, including a copy of the original object. -The number must be at least 1 in each direction. + Antall elementer i listen i den angitte retningen, inkludert en kopi av det opprinnelige objektet. +Tallet må være minst 1 i hver retning. Number of elements - Number of elements + Antall elementer @@ -552,7 +552,7 @@ Change the direction of the axis itself in the property editor. Center of rotation - Center of rotation + Rotasjonssenter @@ -627,7 +627,7 @@ It must be at least 2. Number of elements - Number of elements + Antall elementer @@ -680,12 +680,12 @@ It must be at least 2. Font file - Font file + Skrift fil Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Angi koordinater eller velg punkt med musen. @@ -695,7 +695,7 @@ It must be at least 2. Reset Point - Reset Point + Tilbakestill punkt @@ -720,32 +720,32 @@ Or choose one of the options below Top (XY) - Top (XY) + Topp (XY) Sets the working plane to the XZ plane (front plane) - Sets the working plane to the XZ plane (front plane) + Angir arbeidsplan til XZ-planet (frontplan) Front (XZ) - Front (XZ) + Forside (XZ) Sets the working plane to the YZ plane (side plane) - Sets the working plane to the YZ plane (side plane) + Angir arbeidsplan til YZ-planet (sideplan) Side (YZ) - Side (YZ) + Side (YZ) Sets the working plane facing the current view - Sets the working plane facing the current view + Angir arbeidsplanet som vender mot gjeldende visning @@ -790,7 +790,7 @@ of the buttons above Center plane on view - Center plane on view + Midtstilt plan på visning @@ -806,34 +806,34 @@ Then, press the button below Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view - Moves the working plane without changing its -orientation. If no point is selected, the plane -will be moved to the center of the view + Flytter arbeidslaget uten å endre +sin orientering. Hvis ingen punkt er valgt, vil planet +bli flyttet til midten av visningen Move working plane - Move working plane + Flytt arbeidsplan The spacing between the smaller grid lines - The spacing between the smaller grid lines + Avstanden mellom de mindre nettlinjene Grid spacing - Grid spacing + Avstand mellom ruter The number of squares between each main line of the grid - The number of squares between each main line of the grid + Antall ruter mellom hver hovedlinje i nettet Main line every - Main line every + Hoved linjer for hver @@ -852,22 +852,22 @@ value by using the [ and ] keys while drawing Centers the view on the current working plane - Centers the view on the current working plane + Sentrer visningen på gjeldende plan Center view - Center view + Sentrer visning Resets the working plane to its previous position - Resets the working plane to its previous position + Nullstiller arbeidsplanet til forrige posisjon Previous - Previous + Forrige @@ -1038,52 +1038,52 @@ such as "Arial:Bold" Select base objects after copying - Select base objects after copying + Velg baseobjekter etter kopiering If checked, a grid will appear when drawing - If checked, a grid will appear when drawing + Hvis merket av, vil et rutenett vises når tegning vises Use grid - Use grid + Bruk rutenett Grid spacing - Grid spacing + Avstand mellom ruter The spacing between each grid line - The spacing between each grid line + Avstanden mellom hver rutenett Main lines every - Main lines every + Hoved linjer for hver Mainlines will be drawn thicker. Specify here how many squares between mainlines. - Mainlines will be drawn thicker. Specify here how many squares between mainlines. + Hovedlinjer vil bli trukket raskere. Angi her hvor mange ruter mellom hovedlinjene. Internal precision level - Internal precision level + Innvendig presisjonsnivå This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. - This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. + Dette er retningen på dimensjonstekstene når disse dimensjonene er vertikale. Standard er venstre, som er ISO-standarden. Left (ISO standard) - Left (ISO standard) + Venstre (ISO standard) @@ -1128,7 +1128,7 @@ such as "Arial:Bold" Use standard font size for texts - Use standard font size for texts + Bruk standard skriftstørrelse for tekster @@ -1138,12 +1138,12 @@ such as "Arial:Bold" Render polylines with width - Render polylines with width + Render polyliner med bredde Translated (for print & display) - Translated (for print & display) + Oversatt (for utskrift og visning) @@ -1183,7 +1183,7 @@ such as "Arial:Bold" Import - Import + Importer @@ -1193,7 +1193,7 @@ such as "Arial:Bold" points - points + punkter @@ -1213,12 +1213,12 @@ such as "Arial:Bold" Visual settings - Visual settings + Visuelle innstillinger Visual Settings - Visual Settings + Visuelle innstillinger @@ -1238,7 +1238,7 @@ such as "Arial:Bold" Color - Color + Farge @@ -1248,7 +1248,7 @@ such as "Arial:Bold" Grid - Grid + Rutenett @@ -1258,7 +1258,7 @@ such as "Arial:Bold" Texts and dimensions - Texts and dimensions + Tekster og dimensjoner @@ -1278,7 +1278,7 @@ such as "Arial:Bold" Arrow - Arrow + Pil @@ -1298,7 +1298,7 @@ such as "Arial:Bold" Select a font file - Select a font file + Velg en skriftfil @@ -1323,7 +1323,7 @@ such as "Arial:Bold" Sketches - Sketches + Skisser @@ -1398,12 +1398,12 @@ such as "Arial:Bold" Dotted line definition - Dotted line definition + Prikket linjedefinisjon 0.02,0.02 - 0.02,0.02 + 0.02,0.02 @@ -1413,12 +1413,12 @@ such as "Arial:Bold" Text settings - Text settings + Tekstinnstillinger Font family - Font family + Skrift familie @@ -1428,32 +1428,32 @@ such as "Arial:Bold" Dimension settings - Dimension settings + Dimensjon innstillinger Display mode - Display mode + Visningsmodus Arrows style - Arrows style + Piltype Arrows size - Arrows size + Pilstørrelse Text orientation - Text orientation + Tekst orientering Text spacing - Text spacing + Tekst mellomrom @@ -1473,22 +1473,22 @@ such as "Arial:Bold" DWG - DWG + DWG DWG conversion - DWG conversion + Konvertering til DWG <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Merk:</span> DXF alternativer gjelder også for DWG-filer.</p></body></html> DXF - DXF + DXF @@ -1508,17 +1508,17 @@ such as "Arial:Bold" OCA - OCA + OCA SVG - SVG + SVG Disable units scaling - Disable units scaling + Deaktiver skalering av enheter @@ -1533,12 +1533,12 @@ such as "Arial:Bold" Show this dialog when importing and exporting - Show this dialog when importing and exporting + Vis denne dialogen ved import og eksport Automatic update (legacy importer only) - Automatic update (legacy importer only) + Automatisk oppdatering (kun legacy importør) @@ -1558,37 +1558,37 @@ such as "Arial:Bold" Number of decimals - Number of decimals + Antall desimaler Shift - Shift + Skift Ctrl - Ctrl + Ctrl Alt - Alt + Alt The Alt modifier key - The Alt modifier key + Alt endringstasten The number of horizontal or vertical lines of the grid - The number of horizontal or vertical lines of the grid + Antall horisontale eller vertikale linjer i rutenettet The default color for new objects - The default color for new objects + Standardfargen for nye objekter @@ -1653,7 +1653,7 @@ such as "Arial:Bold" Preserve colors of faces during downgrade/upgrade - Preserve colors of faces during downgrade/upgrade + Bevar farger av overflater under nedgradering/oppgradering @@ -1689,8 +1689,8 @@ such as "Arial:Bold" This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + Dette er verdien som brukes av funksjoner som bruker en toleranse. +Verdier som har differanser under denne verdien vil bli behandlet likt. Denne verdien vil bli foreldet snart slik at presisjonsnivået over kontrollerer begge deler. @@ -1715,22 +1715,22 @@ Values with differences below this value will be treated as same. This value wil Relative - Relative + Relativ R - R + R Continue - Continue + Fortsett T - T + T @@ -1740,7 +1740,7 @@ Values with differences below this value will be treated as same. This value wil O - O + O @@ -1750,7 +1750,7 @@ Values with differences below this value will be treated as same. This value wil P - P + P @@ -1760,22 +1760,22 @@ Values with differences below this value will be treated as same. This value wil D - D + D Fill - Fill + Fyll L - L + L Exit - Exit + Avslutt @@ -1785,12 +1785,12 @@ Values with differences below this value will be treated as same. This value wil Select Edge - Select Edge + Velg kant E - E + E @@ -1800,7 +1800,7 @@ Values with differences below this value will be treated as same. This value wil Q - Q + Q @@ -1810,7 +1810,7 @@ Values with differences below this value will be treated as same. This value wil H - H + H @@ -1820,17 +1820,17 @@ Values with differences below this value will be treated as same. This value wil W - W + W Set WP - Set WP + Angi gjeldende plan U - U + U @@ -1840,7 +1840,7 @@ Values with differences below this value will be treated as same. This value wil ` - ` + ` @@ -1850,32 +1850,32 @@ Values with differences below this value will be treated as same. This value wil S - S + S Increase Radius - Increase Radius + Øk radius [ - [ + [ Decrease Radius - Decrease Radius + Reduser radius ] - ] + ] Restrict X - Restrict X + Begrens X @@ -1885,7 +1885,7 @@ Values with differences below this value will be treated as same. This value wil Restrict Y - Restrict Y + Begrens Y @@ -1895,7 +1895,7 @@ Values with differences below this value will be treated as same. This value wil Restrict Z - Restrict Z + Begrens Z @@ -1905,7 +1905,7 @@ Values with differences below this value will be treated as same. This value wil Grid color - Grid color + Rutenettet farge @@ -1970,17 +1970,17 @@ Note that this is not fully supported, and many object will be not editable with User interface settings - User interface settings + Innstillinger for brukergrensesnitt Enable draft statusbar customization - Enable draft statusbar customization + Aktiver utkast statuslinje tilpasninger Draft Statusbar - Draft Statusbar + Utkast Statuslinje @@ -2005,7 +2005,7 @@ Note that this is not fully supported, and many object will be not editable with Draft Edit preferences - Draft Edit preferences + Utkast Redigering instillinger @@ -2025,7 +2025,7 @@ Note that this is not fully supported, and many object will be not editable with Draft edit pick radius - Draft edit pick radius + Utkast til redigeringsradius @@ -2070,12 +2070,12 @@ from the Addon Manager. If unchecked, texts and mtexts won't be imported - If unchecked, texts and mtexts won't be imported + Hvis umerket, tekster og mtekster importeres ikke If unchecked, points won't be imported - If unchecked, points won't be imported + Hvis umerket, vil ikke punkter importeres @@ -2149,7 +2149,7 @@ instead of the size they have in the DXF document Use Layers - Use Layers + Bruk lag @@ -2247,7 +2247,12 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated - Unknown SVG export style, switching to Translated + Ukjent SVG eksportstil, bytte til oversatt + + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box @@ -2255,17 +2260,17 @@ This value is the maximum segment length. Draft Command Bar - Draft Command Bar + Utkast kommandolinje Toggle construction mode - Toggle construction mode + Veksle byggemodus Current line color - Current line color + Gjeldende linjefarge @@ -2275,12 +2280,12 @@ This value is the maximum segment length. Current line width - Current line width + Gjeldende linjebredde Current font size - Current font size + Skriftstørrelse for gjeldende @@ -2340,12 +2345,12 @@ This value is the maximum segment length. Enter point - Enter point + Legg til punkt Enter a new point with the given coordinates - Enter a new point with the given coordinates + Angi et nytt punkt med gitte koordinater @@ -2360,12 +2365,12 @@ This value is the maximum segment length. Length of current segment - Length of current segment + Lengde på valgte segment Angle of current segment - Angle of current segment + Vinkel på valgte segment @@ -2385,17 +2390,17 @@ This value is the maximum segment length. If checked, an OCC-style offset will be performed instead of the classic offset - If checked, an OCC-style offset will be performed instead of the classic offset + Hvis merket av, vil en OCC-stil forskyvning bli utført i stedet for klassisk forskyvning &OCC-style offset - &OCC-style offset + &OCC-stil forskyvning Sides - Sides + Sider @@ -2410,12 +2415,12 @@ This value is the maximum segment length. Auto - Auto + Automatisk Text string to draw - Text string to draw + Tekststreng som skal tegnes @@ -2425,7 +2430,7 @@ This value is the maximum segment length. Height of text - Height of text + Høyde på tekst @@ -2440,12 +2445,12 @@ This value is the maximum segment length. Tracking - Tracking + Sporing Full path to font file: - Full path to font file: + Fullstendig bane til skriftfil: @@ -2480,7 +2485,7 @@ This value is the maximum segment length. Point - Point + Punkt @@ -2495,7 +2500,7 @@ This value is the maximum segment length. Trim - Trim + Beskjær @@ -2510,57 +2515,57 @@ This value is the maximum segment length. Global X - Global X + Global X Global Y - Global Y + Globalt Y Global Z - Global Z + Global Z Local X - Local X + Lokal X Local Y - Local Y + Lokal Y Local Z - Local Z + Lokal Z Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Ugyldig størrelse verdi. Bruker 200.0. Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Ugyldig sporingsverdi. Bruker 0. Please enter a text string. - Please enter a text string. + Vennligst skriv inn en tekststreng. Select a Font file - Select a Font file + Velg en skriftfil Please enter a font file. - Please enter a font file. + Vennligst angi en skriftfil. @@ -2590,12 +2595,12 @@ This value is the maximum segment length. BSpline - BSpline + BSpline BezCurve - BezCurve + BezCurve @@ -2624,12 +2629,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Relative - Relative + Relativ Continue - Continue + Fortsett @@ -2639,12 +2644,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Fill - Fill + Fyll Exit - Exit + Avslutt @@ -2664,22 +2669,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Restrict X - Restrict X + Begrens X Restrict Y - Restrict Y + Begrens Y Restrict Z - Restrict Z + Begrens Z Select edge - Select edge + Velg kant @@ -2689,7 +2694,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Length mode - Length mode + Lengde modus @@ -2699,7 +2704,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Set Working Plane - Set Working Plane + Angi arbeidsplan @@ -2754,7 +2759,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Set WP - Set WP + Angi gjeldende plan diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index 76ec410689..ea17fa6122 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 6d8938886c..62f78d939b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -724,7 +724,7 @@ Or choose one of the options below Sets the working plane to the XZ plane (front plane) - Sets the working plane to the XZ plane (front plane) + Ustawia płaszczyznę roboczą na płaszczyznę XZ (od przodu) @@ -768,9 +768,9 @@ view each time a command is started An optional offset to give to the working plane above its base position. Use this together with one of the buttons above - An optional offset to give to the working plane -above its base position. Use this together with one -of the buttons above + Opcjonalne odsunięcie do płaszczyzny roboczej +powyżej pozycji bazowej. Użyj tej opcji razem z jednym +z przycisków powyżej @@ -914,17 +914,17 @@ value by using the [ and ] keys while drawing XY (Top) - XY (góra) + XY (od góry) XZ (Front) - XZ (przód) + XZ (od przodu) YZ (Side) - YZ (strona) + YZ (od boku) @@ -1072,7 +1072,7 @@ such as "Arial:Bold" Internal precision level - Wewnętrzny poziom precyzji + Wewnętrzny poziom dokładności @@ -2247,6 +2247,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft @@ -2831,7 +2836,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create text - Tworzenie tekstu + Utwórz tekst diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 5cfaedfd1d..5b5340a1a7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 017603d51a..24bc9590dc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -111,7 +111,7 @@ Show lines - Show lines + Mostrar linhas @@ -121,7 +121,7 @@ Extension lines - Extension lines + Linhas de extensão @@ -131,7 +131,7 @@ Line / text color - Line / text color + Cor da linha / texto @@ -181,12 +181,12 @@ A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + Um fator multiplicador que afeta o tamanho dos textos e marcadores The number of decimals to show for dimension values - The number of decimals to show for dimension values + O número de casas decimais a mostrar para os valores de dimensão @@ -221,7 +221,7 @@ The length of the extension lines - The length of the extension lines + O comprimento das linhas de extensão @@ -357,7 +357,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Link array - Link array + Matriz de links @@ -428,7 +428,7 @@ Negative values will result in copies produced in the negative direction. Z intervals - Z intervals + Intervalos de Z @@ -448,7 +448,7 @@ Negative values will result in copies produced in the negative direction. Reset the distances. - Reset the distances. + Redefinir as distâncias. @@ -477,7 +477,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Link array - Link array + Matriz de links @@ -496,7 +496,7 @@ Negative values will result in copies produced in the negative direction. X intervals - X intervals + Intervalos de X @@ -515,7 +515,7 @@ Negative values will result in copies produced in the negative direction. Y intervals - Y intervals + Intervalos de Y @@ -601,7 +601,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Link array - Link array + Matriz de links @@ -1970,7 +1970,7 @@ Note that this is not fully supported, and many object will be not editable with User interface settings - User interface settings + Configurações de interface do usuário @@ -2248,6 +2248,11 @@ Esse valor é o comprimento máximo do segmento. Unknown SVG export style, switching to Translated Estilo de exportação SVG desconhecido, mudando para Traduzido + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index 2d90181da7..341c6df387 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index e503976e8b..06be5f33dd 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -2247,6 +2247,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index 51b2ff284d..b3c90f1ca0 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index a63c390fd7..212596f09d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -2249,6 +2249,11 @@ Această valoare este lungimea maximă a unui segment. Unknown SVG export style, switching to Translated Stilul necunoscut de export SVG, comut la Tradus + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index c4f043b88b..80e16051e3 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index d2e492a0a4..fe3dc9f109 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -2230,6 +2230,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Неизвестный стиль экспорта SVG, переключение на Translated + + + The export list contains no object with a valid bounding box + Список экспорта не содержит объектов с допустимым диапазоном + draft @@ -2699,7 +2704,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Filled - Заполнено + Заполненный diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.qm b/src/Mod/Draft/Resources/translations/Draft_sk.qm index 1f803f2f8c..35e26c69ef 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sk.qm and b/src/Mod/Draft/Resources/translations/Draft_sk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.ts b/src/Mod/Draft/Resources/translations/Draft_sk.ts index 33cc1055aa..77c5eb96ea 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sk.ts @@ -2247,6 +2247,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 3e4ec34036..b38d78862e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index c06badce1b..e6b871065f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -769,9 +769,9 @@ view each time a command is started An optional offset to give to the working plane above its base position. Use this together with one of the buttons above - An optional offset to give to the working plane -above its base position. Use this together with one -of the buttons above + Odmik, ki ga po želji lahko določite delavni ravnini +od njenega izhodiščnega položaja. Uporabite to skupaj z enim +od zgornjih gumbov @@ -818,7 +818,7 @@ will be moved to the center of the view The spacing between the smaller grid lines - The spacing between the smaller grid lines + Razmik med manjšimi mrežnimi črtami @@ -1246,7 +1246,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Hatch patterns resolution - Ločljivost vzorca črtkanja + Ločljivost vzorcev črtkanja @@ -1501,7 +1501,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. Use legacy python importer - Uporabi zastarel uvozilnik Python + Uporabi zastarel python uvoznik @@ -1586,7 +1586,7 @@ stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. The number of horizontal or vertical lines of the grid - Število vodoravnih in navpičnih črt mreže + Število vodoravnih in navpičnih mrežnih črt @@ -1698,7 +1698,7 @@ Vrednosti z odstopanjem, manjšim od te vrednosti bodo obravnavane kot enake. Ta Use legacy python exporter - Uporabi zastarel izvozilnik Python + Uporabi zastarel python izvoznik @@ -1946,15 +1946,15 @@ This allows to point the direction and type the distance. If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe - If this is checked, objects will appear as filled by default. -Otherwise, they will appear as wireframe + Če je to označeno, bodo predmeti privzeto prikazani zapolnjeno. +V nasprotnem primeru bodo prikazani kot žični model Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - Normally, after copying objects, the copies get selected. -If this option is checked, the base objects will be selected instead. + Običajno po kopiranju predmetov postanejo izbrane kopije. +Če je ta možnost označena, bo namesto tega izbran izhodiščni predmet. @@ -1973,7 +1973,7 @@ Note that this is not fully supported, and many object will be not editable with User interface settings - User interface settings + Nastavitve uporabniškega vmesnika @@ -2008,7 +2008,7 @@ Note that this is not fully supported, and many object will be not editable with Draft Edit preferences - Draft Edit preferences + Prednastavitve urejanja osnutka @@ -2043,7 +2043,7 @@ Note that this is not fully supported, and many object will be not editable with This preferences dialog will be shown when importing/ exporting DXF files - This preferences dialog will be shown when importing/ exporting DXF files + Pri uvažanju in izvažanju datotek DXF bo prikazano pogovorno okno s prednastavitvami @@ -2088,12 +2088,12 @@ from the Addon Manager. If you want the non-named blocks (beginning with a *) to be imported too - If you want the non-named blocks (beginning with a *) to be imported too + Če želite, da se uvozijo tudi brezimni zbiri (začnejo se z *) Only standard Part objects will be created (fastest) - Only standard Part objects will be created (fastest) + Samo običajni predmeti delov bodo ustvarjeni (najhitrejše) @@ -2127,8 +2127,7 @@ Otherwise default colors will be applied. FreeCAD will try to join coincident objects into wires. Note that this can take a while! - FreeCAD will try to join coincident objects into wires. -Note that this can take a while! + FreeCAD bo poskusil spojiti sovpadajoče predmete v črtovja. Vedite, da to lahko traja dlje časa! @@ -2141,8 +2140,8 @@ turning the display faster, but making them less easily editable Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document - Imported texts will get the standard Draft Text size, -instead of the size they have in the DXF document + Uvožena besedila bodo namesto velikosti, ki jo imajo v +dokumentu DXF, prevzela privzeto velikost besedila v osnutkih @@ -2157,7 +2156,7 @@ instead of the size they have in the DXF document Hatches will be converted into simple wires - Hatches will be converted into simple wires + Črtkanja bodo pretvorjena v enostavna črtovja @@ -2181,8 +2180,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Drawing Views will be exported as blocks. This might fail for post DXF R12 templates. - Drawing Views will be exported as blocks. -This might fail for post DXF R12 templates. + Risalne poglede se bo izvozilo kot zbire. +To lahko spodleti pri predlogah novejših od DXF R12. @@ -2251,6 +2250,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft @@ -2771,7 +2775,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - Če je označeno, se predmete kopira namesto premika. Lastnosti -> Osnutek -> Splošni način kopiranja, da ohranite ta način pri sledečih ukazih + Če je označeno, se predmete kopira namesto premika. Prednastavitve -> Osnutek -> Splošni način kopiranja, da ohranite ta način pri sledečih ukazih diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index ad75b63196..8d53d3c00a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 2a3151325d..f936cba2b6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index c48280e5d8..d6e8e9a741 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 55b3acb9db..ff1ff0992f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -11,17 +11,17 @@ Style name - Style name + Namn på stil Add new... - Add new... + Lägg till ny... Renames the selected style - Renames the selected style + Döper om den valda stilen @@ -31,7 +31,7 @@ Deletes the selected style - Deletes the selected style + Tar bort den valda stilen @@ -76,7 +76,7 @@ Decimals - Decimals + Decimaler @@ -86,12 +86,12 @@ Show unit - Show unit + Visa enhet Line and arrows - Line and arrows + Rad och pilar @@ -111,7 +111,7 @@ Show lines - Show lines + Visa rader @@ -171,7 +171,7 @@ Font size in the system units - Font size in the system units + Storlek på teckensnitt i systemenheter @@ -181,17 +181,17 @@ A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + En multipel som påverkar storleken på texter och markörer The number of decimals to show for dimension values - The number of decimals to show for dimension values + Antalet decimaler som ska visas för dimensionsvärden Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Ange en giltig längdenhet som mm, m, in, ft, för att tvinga fram dimensionsvärdet i denna enhet @@ -258,7 +258,7 @@ menyverktyg -> Insticksmodulshanterare Draft utility tools - Draft utility tools + Verktyg för utkast @@ -308,7 +308,7 @@ Change the direction of the axis itself in the property editor. Center of rotation - Center of rotation + Rotationscentrum @@ -333,7 +333,7 @@ Change the direction of the axis itself in the property editor. Reset point - Reset point + Återställningspunkt @@ -396,7 +396,7 @@ It must be at least 2. Number of circular layers - Number of circular layers + Antal cirkulära lager @@ -406,7 +406,7 @@ It must be at least 2. (Placeholder for the icon) - (Placeholder for the icon) + (Platshållare för ikonen) @@ -453,7 +453,7 @@ Negative values will result in copies produced in the negative direction. Reset Z - Reset Z + Återställ Z @@ -482,7 +482,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Placeholder for the icon) + (Platshållare för ikonen) @@ -496,12 +496,12 @@ Negative values will result in copies produced in the negative direction. X intervals - X intervals + X intervall Reset X - Reset X + Återställ X @@ -552,7 +552,7 @@ Change the direction of the axis itself in the property editor. Center of rotation - Center of rotation + Rotationscentrum @@ -577,7 +577,7 @@ Change the direction of the axis itself in the property editor. Reset point - Reset point + Återställningspunkt @@ -632,7 +632,7 @@ It must be at least 2. (Placeholder for the icon) - (Placeholder for the icon) + (Platshållare för ikonen) @@ -735,7 +735,7 @@ Eller markera ett av alternativen nedan Sets the working plane to the YZ plane (side plane) - Sets the working plane to the YZ plane (side plane) + Ställer in arbetsplanet till YZ-planet (sidoplan) @@ -745,7 +745,7 @@ Eller markera ett av alternativen nedan Sets the working plane facing the current view - Sets the working plane facing the current view + Ställer in arbetsplanet som vetter mot den aktuella vyn @@ -1376,7 +1376,7 @@ som "Arial:Bold" text inside (3D) - Text inuti (3D) + text inuti (3D) @@ -1973,7 +1973,7 @@ Note that this is not fully supported, and many object will be not editable with User interface settings - User interface settings + Inställningar för användargränssnitt @@ -1983,7 +1983,7 @@ Note that this is not fully supported, and many object will be not editable with Draft Statusbar - Draft Statusbar + Statusfält för utkast @@ -2152,7 +2152,7 @@ instead of the size they have in the DXF document Use Layers - Use Layers + Använd lager @@ -2237,12 +2237,12 @@ This value is the maximum segment length. Converting: - Converting: + Konverterar: Conversion successful - Conversion successful + Konverteringen lyckades @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft @@ -2886,7 +2891,7 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. successfully exported - successfully exported + exporteringen lyckades diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index effed7c220..d912b2b7cf 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index f6cc597d4a..5345a14a73 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -91,7 +91,7 @@ Line and arrows - Line and arrows + Çizgi ve Oklar @@ -111,7 +111,7 @@ Show lines - Show lines + Çizgileri göster @@ -121,7 +121,7 @@ Extension lines - Extension lines + Uzatma çizgileri @@ -136,7 +136,7 @@ The width of the dimension lines - The width of the dimension lines + Ölçülendirme çizgisinin kalınlığı @@ -146,7 +146,7 @@ The color of dimension lines, arrows and texts - The color of dimension lines, arrows and texts + Ölçülendirme çizgilerinin, okların ve metinlerin rengi @@ -176,7 +176,7 @@ Line spacing in system units - Line spacing in system units + Sistem birimlerinde çizgi boşluğu @@ -221,7 +221,7 @@ The length of the extension lines - The length of the extension lines + Uzatma çizgilerinin uzunluğu @@ -243,17 +243,17 @@ menüden Araçlar -> Eklenti Yöneticisi Draft creation tools - Draft creation tools + Taslak hazırlama araçları Draft annotation tools - Draft annotation tools + Taslak açıklama araçları Draft modification tools - Draft modification tools + Taslak düzenleme araçları @@ -818,7 +818,7 @@ will be moved to the center of the view The spacing between the smaller grid lines - The spacing between the smaller grid lines + Her bir kılavuz çizgisi arasındaki mesafe @@ -828,7 +828,7 @@ will be moved to the center of the view The number of squares between each main line of the grid - The number of squares between each main line of the grid + Izgaranın her ana çizgisi arasındaki kare sayısı @@ -2250,6 +2250,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 6a290ce36d..712dfe01f6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index 01208eeed8..c15c0d1ded 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -2252,6 +2252,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index a92968aeb9..f9c37aab3f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index b30f5fbe1b..7ccf219dbe 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -2221,6 +2221,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Estil d'exportació SVG desconegut, s'està canviant a Traduït + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index 1f97a83578..f67694da4f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index e727d675ae..8b0fb7d53e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -2250,6 +2250,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index ce1ee8db7c..c60e9a9282 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index ce12ed491a..271670204f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -256,7 +256,7 @@ from menu Tools -> Addon Manager Draft utility tools - Draft utility tools + 草图工具 @@ -748,7 +748,7 @@ Or choose one of the options below Align to view - Align to view + 对齐视图 @@ -1918,7 +1918,7 @@ Values with differences below this value will be treated as same. This value wil Draft tools options - Draft tools options + 草图工具选项 @@ -1968,7 +1968,7 @@ Note that this is not fully supported, and many object will be not editable with User interface settings - User interface settings + 用户界面 @@ -1978,7 +1978,7 @@ Note that this is not fully supported, and many object will be not editable with Draft Statusbar - Draft Statusbar + 草图状态栏 @@ -2003,7 +2003,7 @@ Note that this is not fully supported, and many object will be not editable with Draft Edit preferences - Draft Edit preferences + 草稿编辑选项 @@ -2147,7 +2147,7 @@ instead of the size they have in the DXF document Use Layers - Use Layers + 使用图层 @@ -2247,6 +2247,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft @@ -2840,22 +2845,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Center Y - Center Y + 中心 Y Center Z - Center Z + 中心 Z Offset distance - Offset distance + 偏移距离 Trim distance - Trim distance + 修剪距离 @@ -2878,7 +2883,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer successfully exported - successfully exported + 成功导出 diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index e4a4702ff1..260cbdd5e7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index b0a5b9e502..2b59ded5b5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -2249,6 +2249,11 @@ This value is the maximum segment length. Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + draft diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm index 41a381b955..4254487bb6 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ar.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ar.qm index 387bc1317a..7fc857c66a 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ar.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ar.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ca.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ca.qm index ae5f4e70ca..aee31cc01b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ca.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ca.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm index a012b68f71..7e049d5f23 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm index b3e5d9b5b4..4826dfa9d7 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_el.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_el.qm index 570e2589de..1aa8e6c03c 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_el.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_el.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm index 4af2c46b0a..cd214b733e 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_eu.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_eu.qm index bce1668dd3..169a9cb8c2 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_eu.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_eu.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm index ecf7be45b7..c2f1f293f9 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fil.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fil.qm index 5084c62fc9..4c71a503ae 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fil.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fil.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm index f648e6513c..904bb75f10 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_gl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_gl.qm index 23d5fc812d..53c238ee2c 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_gl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_gl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm index 01beb7f896..391422e7d8 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm index fc06580b99..88b6b77267 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_id.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_id.qm index 121caae25e..5d658d0998 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_id.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_id.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm index 7b0a8e435a..9ba3bb675f 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm index ef17440e06..07f4daa07a 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_kab.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_kab.qm index 89ac6dd3ed..383607d43b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_kab.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_kab.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm index 2abb643ca1..60733946e5 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm index ad513ff2ae..91ec2cf506 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_lt.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm index cded3aca8d..8023d499fc 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm index 01d0111d54..240887d714 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm index 207e487bef..c1d29c87cf 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts index b86f118502..95dffc4c09 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts @@ -336,7 +336,7 @@ The printer uses a different orientation than the drawing. Do you want to continue? - Drukarka używa inną orientację strony niż rysunek. + Drukarka używa innej orientacji strony niż rysunek. Czy chcesz kontynuować? diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm index 1677c9c8e9..df728a5b3b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm index c873dc48e6..b931819efb 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm index 8a9aa2dbc9..abbbda780b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm index fab9ea8643..b5c8d18647 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.qm index d291a4144f..ce0ba62757 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm index 3679af2d2a..748d0c7b1c 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm index 1caa4dc282..1964c49fbf 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm index f5e8786e2f..061366568f 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.qm index c87632fdef..2e30f27b80 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm index 3a0937d878..e004421ea0 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm index eff996169f..440981e5bd 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_val-ES.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_vi.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_vi.qm index cc3099d259..782ad445c1 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_vi.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_vi.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm index 291923ea18..0d8a591b7b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm index 2630dd585f..b3c24eceb5 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm index 70f2aa2ea6..c115098f1d 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm index efb68878e1..cedf28cef2 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm index 55bb2c7b85..caf608f1e6 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index fe31ba58d9..d0b4519a45 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index d18675b043..a8ee56b928 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm index 8f08d747f4..39537a80df 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index c9bf212771..b807fc463a 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index 45d7ffdb5a..ff200f765b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm index 9e1cce55c3..ba235cf6e0 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm index 35aadbf99b..e2e1d7983d 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index f8a7835103..c0cf20f4ff 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm index 8b5e81e39d..73c944674b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm index 4f05e05300..3d03c473ec 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index 87936110ec..240d4043c4 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 58dec6a0e8..d16c9e566e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -16,7 +16,7 @@ To add references: select them in the 3D view and click "Add". - To add references: select them in the 3D view and click "Add". + Hivatkozások hozzáadásához válassza ki a 3D-s nézetben és kattintson a "Hozzáadás" gombra. @@ -110,7 +110,7 @@ Select elements part of the solid that shall be added to the list. To add the solid click "Add". - Select elements part of the solid that shall be added to the list. To add the solid click "Add". + Válassza ki a listához hozzáadni kívánt szilárd test elemeit. A test hozzáadáshoz kattintson a "Hozzáadás" gombra. diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm index fbe88e1406..a5e8c2fb58 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index 6f85b8d285..3569d1101b 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 50d1030023..c4ed64d5d5 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -581,7 +581,7 @@ Run solver calculations - Esegui i calcoli con il solutore + Avvia il solutore @@ -892,7 +892,7 @@ Run solver calculations - Esegui i calcoli con il solutore + Avvia il solutore diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm index 08e4a05cb3..3ce563e51c 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm index 7371bb14ab..ac01552f6b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm index 9d4dc3c873..7c5cd26c9f 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm index 2bace74d39..eb6fcea152 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm index c79f3d6875..3139430caf 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm index 62026284da..8292f9341f 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index 994ff01222..40289a4644 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 87b187d2e8..d3984d30df 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -16,7 +16,7 @@ To add references: select them in the 3D view and click "Add". - To add references: select them in the 3D view and click "Add". + Aby dodać odniesienia: zaznacz je w widoku 3D i kliknij „Dodaj”. @@ -82,7 +82,7 @@ Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: - Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: + Kliknij na przycisk "Dodaj" i wybierz elementy geometryczne, aby dodać je do listy. Jeśli żadna geometria nie zostanie dodana do listy, wszystkie pozostałe zostaną użyte. Można wybrać następujące elementy geometryczne: @@ -110,7 +110,7 @@ Select elements part of the solid that shall be added to the list. To add the solid click "Add". - Select elements part of the solid that shall be added to the list. To add the solid click "Add". + Wybierz elementy wchodzące w skład bryły, które mają być dodane do listy. Aby dodać bryłę należy kliknąć "Dodaj". @@ -165,7 +165,7 @@ Constraint body heat source - Ograniczenie źródła ciepła ciała + Zdefiniuj źródła ciepła ciała @@ -178,7 +178,7 @@ Constraint electrostatic potential - Constraint electrostatic potential + Zdefiniuj potencjał elektrostatyczny @@ -191,7 +191,7 @@ Constraint flow velocity - Constraint flow velocity + Zdefiniuj prędkość przepływu @@ -204,12 +204,12 @@ Constraint initial flow velocity - Constraint initial flow velocity + Zdefiniuj początkową prędkość przepływu Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Tworzy wiązanie FEM dla początkowej prędkości przepływu @@ -217,7 +217,7 @@ Constraint self weight - Ograniczenie wagi własnej + Zdefiniuj masę @@ -334,7 +334,7 @@ Fluxsolver heat - Fluxsolver heat + Grzanie topnika @@ -355,7 +355,7 @@ Material for fluid - Material for fluid + Materiał na ciecz @@ -386,7 +386,7 @@ Reinforced material (concrete) - Reinforced material (concrete) + Materiał zbrojony (beton) @@ -752,7 +752,7 @@ Constraint self weigt - Obciążenie ciężarem własnym + Zdefiniuj masę @@ -2022,7 +2022,7 @@ Constraint force - Siła reakcji + Zdefiniuj siłę @@ -2129,7 +2129,7 @@ Constraints - Ograniczenia + Wiązania diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm index 071e8df6c1..d88c9d19d0 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index 90151796ca..ca87942e15 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm index 12bb2ae18c..201c325bb6 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index c285863c32..48c6534a45 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm index 38fa9dfb1d..68713b3adb 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm index 5e9bd367f0..3be7db2c6e 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 82bbd52784..d6d0438577 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -1133,7 +1133,7 @@ Create FEM constraint for a fixed geometric entity - Ustvari omejitev MKE za pritrjeno geometrično prvino + Ustvari omejilo MKE za nepremično geometrično prvino @@ -1411,7 +1411,7 @@ You must specify at least one reference - Navesti morate vsaj eno osnovo + Navesti morate vsaj en sklic @@ -1523,7 +1523,7 @@ Please use only a single reference for bearing constraint - Uporabite samo en osnovo za ležajno omejitev + Uporabite samo en sklic za ležajno omejitev @@ -1595,12 +1595,12 @@ Mixed shape types are not possible. Use a second constraint instead - Mešane vrste oblik niso mogoče. Raje uporabite dodatno omejitev + Mešane vrste oblik niso mogoče. Raje uporabite dodatno omejilo Only faces, edges and vertices can be picked - Izberete lahko samo ploskve, robove in temena + Izberete lahko le ploskve, robove in oglišča @@ -1637,12 +1637,12 @@ Mixed shape types are not possible. Use a second constraint instead - Mešane vrste oblik niso mogoče. Raje uporabite dodatno omejitev + Mešane vrste oblik niso mogoče. Raje uporabite dodatno omejilo Only faces, edges and vertices can be picked - Izberete lahko samo ploskve, robove in temena + Izberete lahko le ploskve, robove in oglišča @@ -1967,7 +1967,7 @@ Select an edge, face or body. Only one body is allowed. - Izberi rob, ploskev ali telo. Dovoljeno je izbrati samo eno telo. + Izberite rob, ploskev ali telo. Dovoljeno je izbrati samo eno telo. @@ -2369,7 +2369,7 @@ Fixed - Pritrjen + Nepremičen diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm index 87d3ea8eb3..1b1996e7f3 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index a385266116..b317d964f0 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 1b1c551948..aff5ff9b06 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -295,7 +295,7 @@ Electrostatic equation - Electrostatic equation + Elektrostatisk ekvation diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 672b380fbe..200965d650 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm index 031ee493c2..74168566f7 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm index 590b077aec..12a38a5654 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm index 27756c7133..cdf9e108c4 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index 046d23c46e..e8a90bb932 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -16,7 +16,7 @@ To add references: select them in the 3D view and click "Add". - To add references: select them in the 3D view and click "Add". + Để thêm tham chiếu, hãy chọn chúng trong chế độ xem 3D, sau đó nhấp vào Thêm. @@ -82,7 +82,7 @@ Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: - Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: + Nhấp vào "Thêm" và chọn các yếu tố hình học để thêm chúng vào danh sách. Nếu không có hình học nào được thêm vào danh sách, tất cả các hình còn lại sẽ được sử dụng. Các yếu tố hình học sau đây được phép chọn: @@ -110,7 +110,7 @@ Select elements part of the solid that shall be added to the list. To add the solid click "Add". - Select elements part of the solid that shall be added to the list. To add the solid click "Add". + Chọn các phần tử của chất rắn sẽ được thêm vào danh sách. Để thêm chất rắn, nhấp chuột vào "Thêm". @@ -157,7 +157,7 @@ Remove all clipping planes - Remove all clipping planes + Gỡ bỏ tất cả các mặt phẳng cắt @@ -178,7 +178,7 @@ Constraint electrostatic potential - Constraint electrostatic potential + Tạo ra và khống chế một điện thế tĩnh điện theo FEM @@ -191,7 +191,7 @@ Constraint flow velocity - Constraint flow velocity + Khống chế tốc độ dòng chảy @@ -204,12 +204,12 @@ Constraint initial flow velocity - Constraint initial flow velocity + Khống chế tốc độ dòng ban đầu Creates a FEM constraint initial flow velocity - Creates a FEM constraint initial flow velocity + Tạo và khống chế tốc độ dòng chảy theo FEM @@ -334,7 +334,7 @@ Fluxsolver heat - Fluxsolver heat + Dòng giải pháp nhiệt @@ -355,7 +355,7 @@ Material for fluid - Material for fluid + Vật liệu FEM cho chất lỏng diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm index 01fe1ea118..7eb592abc3 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm index b3fc8498e3..18cb2ffb5d 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_af.qm b/src/Mod/Image/Gui/Resources/translations/Image_af.qm index 617540eb51..cd97798676 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_af.qm and b/src/Mod/Image/Gui/Resources/translations/Image_af.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ar.qm b/src/Mod/Image/Gui/Resources/translations/Image_ar.qm index b5274dd0c1..19cb80512a 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ar.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ar.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ca.qm b/src/Mod/Image/Gui/Resources/translations/Image_ca.qm index 1dec6403e4..7098150165 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ca.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ca.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm index cc4acf6ad6..d9176babac 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm and b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.qm b/src/Mod/Image/Gui/Resources/translations/Image_de.qm index 532ac06be2..a5b24e6f16 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_de.qm and b/src/Mod/Image/Gui/Resources/translations/Image_de.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_el.qm b/src/Mod/Image/Gui/Resources/translations/Image_el.qm index 7aee889fec..1a8a58354b 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_el.qm and b/src/Mod/Image/Gui/Resources/translations/Image_el.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm index 13022b5225..d865ea009a 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm and b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm index c402a5f300..bc405ae1b5 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fi.qm b/src/Mod/Image/Gui/Resources/translations/Image_fi.qm index 49abfe237a..6ee9b62a6c 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_fi.qm and b/src/Mod/Image/Gui/Resources/translations/Image_fi.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fil.qm b/src/Mod/Image/Gui/Resources/translations/Image_fil.qm index 9d64817116..99c3579974 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_fil.qm and b/src/Mod/Image/Gui/Resources/translations/Image_fil.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fr.qm b/src/Mod/Image/Gui/Resources/translations/Image_fr.qm index 95127c6dd2..c16781e784 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_fr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_fr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_gl.qm b/src/Mod/Image/Gui/Resources/translations/Image_gl.qm index 5259be18a9..52906f8bc9 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_gl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_gl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm index 1e4e43fa68..54db9c681b 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm index d42755db3b..96c5b15db4 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_id.qm b/src/Mod/Image/Gui/Resources/translations/Image_id.qm index b25fb882cd..855691975d 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_id.qm and b/src/Mod/Image/Gui/Resources/translations/Image_id.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_it.qm b/src/Mod/Image/Gui/Resources/translations/Image_it.qm index 81810484e8..abf075248b 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_it.qm and b/src/Mod/Image/Gui/Resources/translations/Image_it.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ja.qm b/src/Mod/Image/Gui/Resources/translations/Image_ja.qm index 9ccc1012b0..40abacc0da 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ja.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ja.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_kab.qm b/src/Mod/Image/Gui/Resources/translations/Image_kab.qm index 3092df1c26..489aad4ceb 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_kab.qm and b/src/Mod/Image/Gui/Resources/translations/Image_kab.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ko.qm b/src/Mod/Image/Gui/Resources/translations/Image_ko.qm index 9d656d1822..22c716a1f1 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ko.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ko.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_lt.qm b/src/Mod/Image/Gui/Resources/translations/Image_lt.qm index 7018b830f4..51bb8bf961 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_lt.qm and b/src/Mod/Image/Gui/Resources/translations/Image_lt.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_nl.qm b/src/Mod/Image/Gui/Resources/translations/Image_nl.qm index 04d8199a32..8e516706d1 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_nl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_nl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_no.qm b/src/Mod/Image/Gui/Resources/translations/Image_no.qm index 450bb26f96..90ec2a576e 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_no.qm and b/src/Mod/Image/Gui/Resources/translations/Image_no.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm index 3972abe1fe..79b342497e 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts index f22654eba0..850e3b559c 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts @@ -136,7 +136,7 @@ XY-Plane - Płaszczyzna X-Y + Płaszczyzna XY diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm index 8b8368b3d2..606b35797f 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm index bce59e73e2..b4f75b40bf 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ro.qm b/src/Mod/Image/Gui/Resources/translations/Image_ro.qm index 09ebbd5f85..8a51854c44 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ro.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ro.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm index 4fe000427a..8ac0a4d426 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sk.qm b/src/Mod/Image/Gui/Resources/translations/Image_sk.qm index fa9efdf635..fb0cc111c4 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sk.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sk.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sl.qm b/src/Mod/Image/Gui/Resources/translations/Image_sl.qm index 9a1e3e73c0..bdff5f6d93 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sr.qm b/src/Mod/Image/Gui/Resources/translations/Image_sr.qm index 9525f4992d..3658c211fe 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm b/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm index 17791c8eee..f6b1e80bde 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_tr.qm b/src/Mod/Image/Gui/Resources/translations/Image_tr.qm index 7391666165..0123691e56 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_tr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_tr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm index 8ab925c7af..eb258313ae 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm and b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm index 25dd98be71..90878a00db 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm and b/src/Mod/Image/Gui/Resources/translations/Image_val-ES.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_vi.qm b/src/Mod/Image/Gui/Resources/translations/Image_vi.qm index 20450ac7a2..c52a83697d 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_vi.qm and b/src/Mod/Image/Gui/Resources/translations/Image_vi.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm index 660129d06e..b307c62802 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm and b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm b/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm index 1eaaa08473..320dfbb3ae 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm and b/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm index ec52a1ccd2..aa15813bf4 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts index 005ea2632e..a13fcd3e4f 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Maas - + Add triangle Voeg driehoek by - - + + Add triangle manually to a mesh Voeg driehoek self by die maas @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Maas - + Boundings info... Begrensings informasie ... - - + + Shows the boundings of the selected mesh Wys die begrensings van die gekose maas @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Maas - + Regular solid... Tipiese soliede liggaam ... - - + + Builds a regular solid Skep 'n soliede liggaam @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Maas - + Cross-sections... Deursnitte... - - + + Cross-sections Deursnitte @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Maas - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Maas - + Difference Verskil @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Maas - + Face info Vlakinformasie - - + + Information about face Informasie oor die vlak @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Maas - + Check solid mesh Kontroleer soliede maas - - + + Checks whether the mesh is a solid Kontroleer of die maas 'n soliede is @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Maas - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Maak 'n dialoog oop om 'n maas te ontleed en herstel @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Maas - + Export mesh... Voer maas uit ... - - + + Exports a mesh to file Voer maas uit na lêer @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Maas - + Close hole Vul gaping - - + + Close holes interactively Vul gapings interaktief @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Maas - + Fill holes... Vul gapings ... - - + + Fill holes of the mesh Vul gapings in die maas @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Maas - + Flip normals Keer normaallyne om - - + + Flips the normals of the mesh Keer die maas se normaallyne om @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Maas - + Create mesh from geometry... Skep 'n maas van 'n vorm ... - - + + Create mesh from the selected geometry Skep maas van die gekose vorm @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Maas - + Create mesh from shape... Skep 'n maas van die vorm ... - + Tessellate shape Tesselleer die vorm @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Maas - + Harmonize normals Harmoniseer normaallyne - - + + Harmonizes the normals of the mesh Harmoniseer die normaallyne van die maas @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Maas - + Import mesh... Voer maas in ... - - + + Imports a mesh from file Voer 'n maas in van 'n lêer @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Maas - + Intersection Snyding @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Maas - + Merge Merge - + Merges selected meshes into one Merges selected meshes into one @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Maas - + Cut mesh Sny maas - - + + Cuts a mesh with a picked polygon Sny 'n maas met 'n gekose veelhoek @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Maas - + Make segment Maak segment - - + + Creates a mesh segment Skep 'n maassegment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Maas - + Select mesh Kies maas - - + + Select an area of the mesh Kies 'n gedeelte van die maas @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Maas - + Split mesh Verdeel 'n maas - - + + Splits a mesh into two meshes Verdeel 'n maas in twee mase @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Maas - + Trim mesh Trim mesh - - + + Trims a mesh with a picked polygon Trims a mesh with a picked polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Maas - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Maas - + Remove components by hand... Verwyder komponente met die hand ... - - + + Mark a component to remove it from the mesh Merk 'n komponent om dit te verwyder uit die maas @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Maas - + Remove components... Verwyder komponente ... - - + + Remove topologic independent components from the mesh Verwyder topologiese onafhanklike komponente van die maas @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Maas - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Maas - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Maas - + Create mesh segments... Create mesh segments... - - + + Create mesh segments Create mesh segments @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Maas - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Maas - + Smooth... Stryk ... - - + + Smooth the selected meshes Stryk die geselekteerde mase se oppervlakke uit @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Maas - + Trim mesh with a plane Trim mesh with a plane - - + + Trims a mesh with a plane Trims a mesh with a plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Maas - + Curvature plot Krommingplot - - + + Calculates the curvature of the vertices of a mesh Bereken die kromming van die hoekpunte van 'n maas @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Maas - + Curvature info Kromminginformasie - - + + Information about curvature Inligting oor die kromming @@ -1267,7 +1267,17 @@ Gee eers die opdrag om die voue te herstel Export AMF files using compression - + + Width: + Wydte: + + + + Height: + Hoogte: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD cannot be found on your system. @@ -1976,146 +1986,161 @@ Please visit http://www.openscad.org/index.html to install it. Import-Export - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files All Files - + Import mesh Voer maas in - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Voer maas uit - + Meshing Tolerance Maastoleransie - + Enter tolerance for meshing geometry: Gee toleransie vir maasvorms: - + The mesh '%1' is not a solid. Die maas '%1' is nie 'n soliede nie. - + The mesh '%1' is a solid. Die maas '%1' is 'n soliede. - + Solid Mesh Soliede Maas - + Boundings Begrensings - + Fill holes Vul gapings - + Fill holes with maximum number of edges: Vul gapings met 'n maksimum aantal kante: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2125,43 +2150,43 @@ Please visit http://www.openscad.org/index.html to install it. [Points: %1, Edges: %2, Faces: %3] - + Display components Display components - + Display segments Display segments - + Leave info mode Verlaat inligtingsmodus - + Index: %1 Indeks: %1 - + Leave hole-filling mode Verlaat gapingvullingsmodus - + Leave removal mode Verlaat verwyderingsmodus - + Delete selected faces Verwyder gekose vlakke - + Clear selected faces Verwyder gekose vlakke diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm index b188356dd4..141a4ca592 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts index dfd84cf5f3..0adcb0e9f4 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle إضافة مثلث - - + + Add triangle manually to a mesh إضافة مثلث يدوياً إلى شبكة @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... معلومات الحدود... - - + + Shows the boundings of the selected mesh يظهر حدود الشبكة المحددة @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... مادة صلبة عادية... - - + + Builds a regular solid يبني الصلبة العادية @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... المقاطع العرضية... - - + + Cross-sections المقاطع العرضية @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference فرق @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info معلومات الوجه - - + + Information about face معلومات عن الوجه @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh تحقق شبكة صلبة - - + + Checks whether the mesh is a solid يتحقق ما إذا كانت الشبكة صلبة @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... تقييم وإصلاح الشبكة... - - + + Opens a dialog to analyze and repair a mesh لفتح مربع حوار لتحليل شبكة وإصلاحها @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... تصدير شبكة... - - + + Exports a mesh to file تصدير الشبكة إلى الملف @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole إغلاق الثقب - - + + Close holes interactively إغلاق الثقوب بشكل تفاعلي @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... ملء الثقوب... - - + + Fill holes of the mesh ملء ثقوب من شبكة @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals الانقلاب الطبيعي - - + + Flips the normals of the mesh Flips the normals of the mesh @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... إنشاء شبكة إنطلاقا من الشكل الهندسي... - - + + Create mesh from the selected geometry إنشاء شبكة إنطلاقا من الشكل الهندسي المحدد @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... إنشاء شبكة من الشكل... - + Tessellate shape شكل تيسلات @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals موائمة المعايير الطبيعية - - + + Harmonizes the normals of the mesh Harmonizes the normals of the mesh @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... استيراد شبكة... - - + + Imports a mesh from file استيراد الشبكة من الملف @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection تداخل @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge دمج - + Merges selected meshes into one دمج الشبكات المختارة في واحدة @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh قطع الشبكة - - + + Cuts a mesh with a picked polygon Cuts a mesh with a picked polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment اجعل الشريحة - - + + Creates a mesh segment يقوم بإنشاء شريحة للشبكة @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh حدد الشبكة - - + + Select an area of the mesh حدد منطقة من الشبكة @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh تقسيم الشبكة - - + + Splits a mesh into two meshes يقسم الشبكة إلى شبكتين @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Trim mesh - - + + Trims a mesh with a picked polygon Trims a mesh with a picked polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... إزالة المكونات يدويا... - - + + Mark a component to remove it from the mesh وضع علامة على عنصر لإزالته من شبكة @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... إزالة المكونات... - - + + Remove topologic independent components from the mesh إزالة بنية المكونات المستقلة من الشبكة @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... مقياس... - + Scale selected meshes ضبط الشبكات المختارة على هذا السلم @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane إنشاء قسم من شبكة والسطح - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... إنشاء شرائح الشبكة... - - + + Create mesh segments إنشاء شرائح الشبكة @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... سلس... - - + + Smooth the selected meshes Smooth the selected meshes @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Trim mesh with a plane - - + + Trims a mesh with a plane Trims a mesh with a plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Curvature plot - - + + Calculates the curvature of the vertices of a mesh يقوم بحساب إنحناء رؤوس الشبكة @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info معلومات الانحناء - - + + Information about curvature معلومات حول الانحناء @@ -1267,7 +1267,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + العرض: + + + + Height: + الإرتفاع: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. حدث خطأ غير معروف أثناء تشغيل OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. لا يمكن العثور على OpenSCAD على النظام الخاص بك. @@ -1976,146 +1986,161 @@ Please visit http://www.openscad.org/index.html to install it. إستيراد-تصدير - + All Mesh Files جميع ملفات الشبكة - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh شبكة ثنائية - - + + Alias Mesh الاسم المستعار للشبكة - - + + Object File Format تنسيق ملف الكائن - - + + Inventor V2.1 ascii المخترع V2.1 أسي - - + + Stanford Polygon مضلع ستانفورد - - + + All Files كل الملفات - + Import mesh استيراد شبكة - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran ذو نزوات غريبة - + Python module def بيثون وحدة نمطية الدفاع - + + Asymptote Format + Asymptote Format + + + Export mesh تصدير الشبكة - + Meshing Tolerance Meshing Tolerance - + Enter tolerance for meshing geometry: Enter tolerance for meshing geometry: - + The mesh '%1' is not a solid. شبكة '%1' ليست صلبة. - + The mesh '%1' is a solid. شبكة '%1' هي صلبة. - + Solid Mesh شبكة صلبة - + Boundings Boundings - + Fill holes ملء الثقوب - + Fill holes with maximum number of edges: ملء الثقوب مع الحد الأقصى لعدد الحواف: - + Scaling تدريج - + Enter scaling factor: أدخل عامل التحجيم: @@ -2125,43 +2150,43 @@ Please visit http://www.openscad.org/index.html to install it. [النقط: %1، الحواف: %2، الوجوه: %3] - + Display components عرض المكونات - + Display segments Display segments - + Leave info mode ترك وضع المعلومات - + Index: %1 الفهرس:%1 - + Leave hole-filling mode ترك وضع ملء الحفرة - + Leave removal mode اترك وضع الإزالة - + Delete selected faces حذف الوجوه المحددة - + Clear selected faces مسح الوجوه المحددة diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm index 322455dfa9..b27a23f6e0 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index 58c3de35ca..ee6ada605c 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Afegeix un triangle - - + + Add triangle manually to a mesh Afegeix manualment un triangle a una malla @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Informació de límits... - - + + Shows the boundings of the selected mesh Mostra els límits de la malla seleccionada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Sòlid regular... - - + + Builds a regular solid Construeix un sòlid regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Interseccions... - - + + Cross-sections Interseccions @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Diferència @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Informació de la cara - - + + Information about face Informació sobre la cara @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Comprova la malla sòlida - - + + Checks whether the mesh is a solid Comprova si la malla és un sòlid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Avalua i repara la malla... - - + + Opens a dialog to analyze and repair a mesh Obri un diàleg per a analitzar i reparar una malla @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exporta la malla... - - + + Exports a mesh to file Exporta una malla a un fitxer @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Tanca el forat - - + + Close holes interactively Tanca forats interactivament @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Ompli els forats... - - + + Fill holes of the mesh Ompli els forats de la malla @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inverteix les normals - - + + Flips the normals of the mesh Inverteix les normals de la malla @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Crea una malla a partir de la geometria... - - + + Create mesh from the selected geometry Crea una malla a partir de la geometria seleccionada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Crea una malla a partir d'una forma... - + Tessellate shape Tesel·la la forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmonitza les normals - - + + Harmonizes the normals of the mesh Harmonitza les normals de la malla @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importa la malla... - - + + Imports a mesh from file Importa una malla des d'un fitxer @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersecció @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Fusiona - + Merges selected meshes into one Fusiona les malles seleccionades en una @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Retalla la malla - - + + Cuts a mesh with a picked polygon Retalla una malla amb un polígon seleccionat @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Fes un segment - - + + Creates a mesh segment Crea un segment de malla @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Selecciona una malla - - + + Select an area of the mesh Selecciona una àrea de la malla @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Divideix la malla - - + + Splits a mesh into two meshes Divideix una malla en dues malles @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Retalla la malla - - + + Trims a mesh with a picked polygon Retalla una malla amb un polígon seleccionat @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Millora... - - + + Refine existing mesh Millora la malla existent @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Elimina components manualment... - - + + Mark a component to remove it from the mesh Marca un component per a eliminar-lo de la malla @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Elimina components... - - + + Remove topologic independent components from the mesh Suprimeix els components topològics independents de la malla @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Escala... - + Scale selected meshes Escala malles seleccionades @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Crea una secció a partir d'una malla i un pla - - + + Section from mesh and plane Secció a partir d'una malla i un pla @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Crea segments de malla... - - + + Create mesh segments Crea segments de malla @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Crea segments de malla a partir de les superfícies que s'ajusten millor... - - + + Create mesh segments from best-fit surfaces Crea segments de malla a partir de les superfícies que s'ajusten millor @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Suavitza... - - + + Smooth the selected meshes Suavitza les malles seleccionades @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Retalla la malla amb un pla - - + + Trims a mesh with a plane Retalla una malla amb un pla @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Gràfic de Curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula la curvatura dels vèrtexs d'una malla @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Info de la curvatura - - + + Information about curvature Informació de la curvatura @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exporta fitxers AMF utilitzant la compressió - + + Width: + Amplada: + + + + Height: + Alçada: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Aquest paràmetre indica si la compressió ZIP s'utilitza en escriure un fitxer en format AMF @@ -1918,7 +1928,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh_BoundingBox - + Boundings of %1: Vincles de %1: @@ -1926,26 +1936,26 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. S'ha produït un error mentre s'executava l'OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. L'OpenSCAD no s'ha pogut trobar al vostre sistema. Visiteu http://www.openscad.org/index.html per a instal·lar-lo. @@ -1967,146 +1977,161 @@ Please visit http://www.openscad.org/index.html to install it. Importació-exportació - + All Mesh Files Tots els fitxers de malla - - + + Binary STL STL binari - - - + + + ASCII STL STL ASCII - - + + Binary Mesh Malla en binari - - + + Alias Mesh Malla d'àlies - - + + Object File Format Format del fitxer d'objecte - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Polígon Stanford - - + + All Files Tots els fitxers - + Import mesh Importa la malla - + Simple Model Format Format de Model Únic - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 comprimit - + Nastran Nastran - + Python module def Mòdul def de Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exporta la malla - + Meshing Tolerance Tolerància de mallat - + Enter tolerance for meshing geometry: Introdueix la tolerància per a la goemetria de mallat: - + The mesh '%1' is not a solid. La malla '%1' no és un sòlid. - + The mesh '%1' is a solid. La malla '%1' és un sòlid. - + Solid Mesh Malla sòlida - + Boundings Límits envoltants - + Fill holes Ompli els forats - + Fill holes with maximum number of edges: Ompli els forats amb un nombre màxim de vores: - + Scaling Escalant - + Enter scaling factor: Introduïu el factor d'escala: @@ -2116,43 +2141,43 @@ Please visit http://www.openscad.org/index.html to install it. [Punts: %1, Arestes: %2, Cares: %3] - + Display components Mostra els components - + Display segments Mostra els segments - + Leave info mode Ix del mode info - + Index: %1 Índex: %1 - + Leave hole-filling mode Ix del mode d'emplenament de forats - + Leave removal mode Ix del mode de supressió - + Delete selected faces Elimina les cares seleccionades - + Clear selected faces Esborra les cares seleccionades diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm index 541c170d63..30ed9a09a6 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index 972d6a1067..876b5c30ac 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Přidat trojúhelník - - + + Add triangle manually to a mesh Přidat ručně trojúhelník do tvaru @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Informace o hranicích... - - + + Shows the boundings of the selected mesh Zobrazuje hranici vybrané sítě @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Pravidelné těleso... - - + + Builds a regular solid Vytvoří pravidelné těleso @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Řezy... - - + + Cross-sections Řezy @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Rozdíl @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Informace o stěně - - + + Information about face Informace o stěně @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Zkontrolovat síť dílu - - + + Checks whether the mesh is a solid Kontroluje, zda síť je těleso @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Vyhodnotit a opravit síť... - - + + Opens a dialog to analyze and repair a mesh Otevře dialog pro analýzu a opravu sítě @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exportovat síť... - - + + Exports a mesh to file Exportovat síť do souboru @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Uzavřít díru - - + + Close holes interactively Uzavřít otvory interaktivně @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Výplně otvorů... - - + + Fill holes of the mesh Vyplnit otvory v síti @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Překlopit normály - - + + Flips the normals of the mesh Otočit normálu sítě @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Vytvořit síť z geometrie... - - + + Create mesh from the selected geometry Vytvořit síť z vybrané geometrie @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Vytvoř síť z útvaru... - + Tessellate shape Plátování útvaru @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Uspořádat normály - - + + Harmonizes the normals of the mesh Uspořádá normály sítě @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importovat síť... - - + + Imports a mesh from file Importuje síť ze souboru @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Průnik @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Sloučit - + Merges selected meshes into one Sloučí vybrané sítě do jedné @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Vyjmout síť - - + + Cuts a mesh with a picked polygon Řez sítí vybraným mnohoúhelníkem @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Vytvořit segment - - + + Creates a mesh segment Vytvoří segment sítě @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Vyberte síť - - + + Select an area of the mesh Vyberte oblast sítě @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Rozdělit síť - - + + Splits a mesh into two meshes Rozdělí síť na dvě @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Oříznout síť - - + + Trims a mesh with a picked polygon Oříznout síť vybraným mnohoúhelníkem @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Ručně odeberte součásti... - - + + Mark a component to remove it from the mesh Označte komponentu k odstranění ze sítě @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Odebrat součásti... - - + + Remove topologic independent components from the mesh Odebrat ze sítě topologicky nezávislé součásti @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Měřítko... - + Scale selected meshes Škálovat vybrané sítě @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Vytvořit průřez ze sítě a roviny - - + + Section from mesh and plane Průřez ze sítě a roviny @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Vytvoření segmentů sítě... - - + + Create mesh segments Vytvoření segmentů sítě @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Vytvořit segmenty sítě z nejlépe odpovídajících ploch... - - + + Create mesh segments from best-fit surfaces Vytvořit segmenty sítě z nejlépe odpovídajících ploch @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Hladké... - - + + Smooth the selected meshes Vyhladit vybrané sítě @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Oříznout síť pomocí roviny - - + + Trims a mesh with a plane Ořízne síť pomocí roviny @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Křivkový graf - - + + Calculates the curvature of the vertices of a mesh Vypočte zakřivení vrcholů sítě @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Informace o zakřivení - - + + Information about curvature Informace o zakřivení @@ -1267,7 +1267,17 @@ Prosím spusťte nejdřív příkaz pro opravu záhybů Exportovat soubory AMF za použití komprese - + + Width: + Šířka: + + + + Height: + Výška: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Tento parametr udává, jestli je použita komprese ZIP při zapisování souboru do formátu AMF @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Hranice %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Při běhu OpenSCADu došlo k neznámé chybě. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nelze najít ve Vašem systému. @@ -1975,146 +1985,161 @@ Prosím navštivte http://www.openscad.org/index.html a nainstalujte ho.Import-Export - + All Mesh Files Všechny soubory sítí - - + + Binary STL Binární STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binární síť - - + + Alias Mesh Alias sítě - - + + Object File Format Formát souboru objektu - - + + Inventor V2.1 ascii Inventor V2.1 ASCII - - + + Stanford Polygon Mnohoúhelník Stanford - - + + All Files Všechny soubory - + Import mesh Importovat síť - + Simple Model Format Jednoduchá formát modelu - + X3D Extensible 3D X3D rozšířitelné 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Komprimované VRML 2.0 - + Nastran Nastran - + Python module def Definice Python modulu - + + Asymptote Format + Asymptote Format + + + Export mesh Exportovat síť - + Meshing Tolerance Tolerance sítě - + Enter tolerance for meshing geometry: Vložit toleranci pro síťovou geometrii: - + The mesh '%1' is not a solid. Síť '%1' netvoří těleso. - + The mesh '%1' is a solid. Síť '%1' je pevná. - + Solid Mesh Síť tělesa - + Boundings Hraniční - + Fill holes Výplně otvorů - + Fill holes with maximum number of edges: Výplně otvorů s největším počtem hran: - + Scaling Škálování - + Enter scaling factor: Vložte měřítko: @@ -2124,43 +2149,43 @@ Prosím navštivte http://www.openscad.org/index.html a nainstalujte ho.[Body: %1, Hrany: %2, Plochy: %3] - + Display components Zobrazit součásti - + Display segments Display segments - + Leave info mode Opustit info režim - + Index: %1 Index: %1 - + Leave hole-filling mode Opustit režim výplně děr - + Leave removal mode Opustit režim odstranění - + Delete selected faces Odstranit vybrané plochy - + Clear selected faces Smazat vybrané plochy diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm index 646571463c..7cd803e72b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index 2ae1dd2331..80393b47d9 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Netz - + Add triangle Dreieck hinzufügen - - + + Add triangle manually to a mesh Dreieck manuell zu einem Netz hinzufügen @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Netz - + Boundings info... Abmessungen... - - + + Shows the boundings of the selected mesh Anzeigen der Abmessungen des gewählten Netzes @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Netz - + Regular solid... Regelgeometrie... - - + + Builds a regular solid Erstellen einer Regelgeometrie @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Netz - + Cross-sections... Schnitte... - - + + Cross-sections Schnitte @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Netz - + Decimation... Dezimierung... - - - + + + Decimates a mesh Dezimiert ein Netz (die Anzahl der Knoten) @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Netz - + Difference Differenz @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Netz - + Face info Dreiecksinformation - - + + Information about face Information über Dreieck @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Netz - + Check solid mesh Netz auf Solid überprüfen - - + + Checks whether the mesh is a solid Überprüft, ob das Netz ein Solid ist @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Netz - + Evaluate and repair mesh... Untersuche und repariere das Netz... - - + + Opens a dialog to analyze and repair a mesh Öffnet einen Dialog zum Analysieren und Reparieren eines Netzes @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Netz - + Export mesh... Netz exportieren... - - + + Exports a mesh to file Netz in eine Datei exportieren @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Netz - + Close hole Loch schließen - - + + Close holes interactively Löcher interaktiv schließen @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Netz - + Fill holes... Löcher schließen... - - + + Fill holes of the mesh Schließt Löcher in dem Netz @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Netz - + Flip normals Normalen umdrehen - - + + Flips the normals of the mesh Dreht die Dreiecksnormalen des Netzes um @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Netz - + Create mesh from geometry... Erzeuge Netz aus Geometrie... - - + + Create mesh from the selected geometry Erzeuge Netz aus selektierter Geometrie @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Netz - + Create mesh from shape... Netz aus Form erstellen... - + Tessellate shape Form tessellieren @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Netz - + Harmonize normals Normalen ausrichten - - + + Harmonizes the normals of the mesh Richtet die Normalen des Netzes aus @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Netz - + Import mesh... Netz importieren... - - + + Imports a mesh from file Importiert Netz aus einer Datei @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Netz - + Intersection Schnitt @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Netz - + Merge Zusammenführen - + Merges selected meshes into one Ausgewählte Netze zu Einem zusammenführen @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Netz - + Cut mesh Netz schneiden - - + + Cuts a mesh with a picked polygon Schneidet ein Netz mit einem ausgewählten Polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Netz - + Make segment Segment erzeugen - - + + Creates a mesh segment Erzeuge Netz-Segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Netz - + Select mesh Netz auswählen - - + + Select an area of the mesh Wähle einen Bereich des Netzes aus @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Netz - + Split mesh Netz auftrennen - - + + Splits a mesh into two meshes Netz in zwei Teile trennen @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Netz - + Trim mesh Netz trimmen - - + + Trims a mesh with a picked polygon Ein Netz mit einem gewählten Polygon trimmen @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Netz - + Refinement... Aufbereitung... - - + + Refine existing mesh Vorhandenes Netz aufbereiten @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Netz - + Remove components by hand... Komponente von Hand entfernen... - - + + Mark a component to remove it from the mesh Markiere Komponente um von Hand zu entfernen @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Netz - + Remove components... Komponenten entfernen... - - + + Remove topologic independent components from the mesh Entfernt topologisch unabhängige Komponenten aus dem Netz @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Netz - + Scale... Skalieren... - + Scale selected meshes Skalieren ausgewählter Netze @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Netz - + Create section from mesh and plane Schnitt aus Netz und Ebene erstellen - - + + Section from mesh and plane Schnitt aus Netz und Ebene @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Netz - + Create mesh segments... Netz-Segmente erstellen... - - + + Create mesh segments Netz-Segmente erstellen @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Netz - + Create mesh segments from best-fit surfaces... Erstelle Netzsegmente aus angenäherten Oberflächen... - - + + Create mesh segments from best-fit surfaces Erstelle Netzsegmente aus angenäherten Oberflächen @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Netz - + Smooth... Glätten... - - + + Smooth the selected meshes Selektierte Netze glätten @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Netz - + Trim mesh with a plane Netz mit Ebene trimmen - - + + Trims a mesh with a plane Ein Netz mit einer Ebene trimmen @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Netz - + Curvature plot Krümmungsplot - - + + Calculates the curvature of the vertices of a mesh Berechnet die Krümmungen in den Vertexen eines Netzes @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Netz - + Curvature info Krümmungsinformation - - + + Information about curvature Informationen über Krümmung @@ -1267,7 +1267,17 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten Export von AMF-Dateien mit Komprimierung - + + Width: + Breite: + + + + Height: + Höhe: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Dieser Parameter zeigt an, ob ZIP-Komprimierung @@ -1922,7 +1932,7 @@ Flächenwinkel < SickenWinkel, wird glattes Schattieren angewendet Mesh_BoundingBox - + Boundings of %1: Grenzen von %1: @@ -1930,26 +1940,26 @@ Flächenwinkel < SickenWinkel, wird glattes Schattieren angewendet Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Beim Ausführen von OpenSCAD ist ein unbekannter Fehler aufgetreten. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD kann auf Ihrem System nicht gefunden werden. @@ -1972,146 +1982,161 @@ Bitte besuchen Sie http://www.openscad.org/index.html, um es zu installieren.Import / Export - + All Mesh Files Alle Netzdateien - - + + Binary STL Binäres STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binäres Mesh - - + + Alias Mesh Alias-Mesh - - + + Object File Format OFF-Dateiformat - - + + Inventor V2.1 ascii Inventor V2.1 ASCII - - + + Stanford Polygon Stanford-Polygon - - + + All Files Alle Dateien - + Import mesh Netz importieren - + Simple Model Format Einfaches Modellformat - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Komprimierte X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2. 0 - + Compressed VRML 2.0 Komprimiertes VRML 2.0 - + Nastran NASTRAN - + Python module def Python-Modul Definition - + + Asymptote Format + Asymptote Format + + + Export mesh Netz exportieren - + Meshing Tolerance Toleranz - + Enter tolerance for meshing geometry: Toleranz zum Erzeugen von Dreiecksnetz eingeben: - + The mesh '%1' is not a solid. Das Netz '%1' ist kein Solid. - + The mesh '%1' is a solid. Das Netz '%1' ist ein Solid. - + Solid Mesh Fester Körper - + Boundings Abmessungen - + Fill holes Löcher schließen - + Fill holes with maximum number of edges: Löcher schließen mit maximaler Anzahl Kanten: - + Scaling Skalieren - + Enter scaling factor: Geben Sie den Skalierungsfaktor an: @@ -2121,43 +2146,43 @@ Bitte besuchen Sie http://www.openscad.org/index.html, um es zu installieren.[Punkte: %1, Kanten: %2, Flächen: %3] - + Display components Komponenten anzeigen - + Display segments Segmente anzeigen - + Leave info mode Info-Modus verlassen - + Index: %1 Index: %1 - + Leave hole-filling mode Löcher-Schließen-Modus verlassen - + Leave removal mode Entfernen-Modus verlassen - + Delete selected faces Selektierte Dreiecke löschen - + Clear selected faces Auswahl aufheben diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.qm index 42869db4bc..a27dc850da 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts index 09cea27e5c..7bdf9e076a 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Προσθέστε τρίγωνο - - + + Add triangle manually to a mesh Προσθέστε τρίγωνο σε κάποιο πλέγμα χειροκίνητα @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Πληροφορίες οριοθετήσεων... - - + + Shows the boundings of the selected mesh Εμφανίζει τις οριοθετήσεις του επιλεγμένου πλέγματος @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Κανονικό στερεό... - - + + Builds a regular solid Χτίζει ένα κανονικό στερεό @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Ορθογώνιες διατομές... - - + + Cross-sections Ορθογώνιες διατομές @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Αφαίρεση @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Πληροφορίες όψης - - + + Information about face Πληροφορίες σχετικά με την όψη @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Έλεγχος στερεού πλέγματος - - + + Checks whether the mesh is a solid Ελέγχει αν το πλέγμα είναι στερεό @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Αξιολόγηση και επισκευή πλέγματος... - - + + Opens a dialog to analyze and repair a mesh Ανοίγει ένα παράθυρο διαλόγου για την ανάλυση και την επισκευή ενός πλέγματος @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Εξαγωγή πλέγματος... - - + + Exports a mesh to file Εξαγάγει ένα πλέγμα σε αρχείο @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Κλείσιμο οπής - - + + Close holes interactively Κλείστε τις οπές διαδραστικά @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Γέμισμα οπών... - - + + Fill holes of the mesh Γεμίστε τις οπές του πλέγματος @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Αντιστροφή καθέτων διανυσμάτων - - + + Flips the normals of the mesh Αντιστρέφει τα κάθετα διανύσματα του πλέγματος @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Δημιουργήστε πλέγμα από γεωμετρικό σχήμα... - - + + Create mesh from the selected geometry Δημιουργήστε πλέγμα από το επιλεγμένο γεωμετρικό σχήμα @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Δημιουργήστε πλέγμα από σχήμα... - + Tessellate shape Ψηφίδωση σχήματος @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Εναρμόνιση καθέτων διανυσμάτων - - + + Harmonizes the normals of the mesh Εναρμονίζει τα κάθετα διανύσματα του πλέγματος @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Εισαγωγή πλέγματος... - - + + Imports a mesh from file Εισάγει ένα πλέγμα από αρχείο @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Σημείο τομής @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Συγχώνευση - + Merges selected meshes into one Συγχωνεύει επιλεγμένα πλέγματα σε ένα @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Περικοπή πλέγματος - - + + Cuts a mesh with a picked polygon Περικόπτει ένα πλέγμα με ένα επιλεγμένο πολύγωνο @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Δημιουργήστε τμήμα - - + + Creates a mesh segment Δημιουργεί ένα τμήμα πλέγματος @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Επιλέξτε πλέγμα - - + + Select an area of the mesh Επιλέξτε μια περιοχή του πλέγματος @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Διαιρέστε πλέγμα - - + + Splits a mesh into two meshes Διαιρεί ένα πλέγμα σε δύο πλέγματα @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Περικοπή ακμών πλέγματος - - + + Trims a mesh with a picked polygon Περικόπτει τις ακμές ενός πλέγματος με ένα επιλεγμένο αντικείμενο @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Αφαιρέστε στοιχεία χειροκίνητα... - - + + Mark a component to remove it from the mesh Επισημάνετε ένα στοιχείο για να το αφαιρέσετε από το πλέγμα @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Αφαιρέστε στοιχεία... - - + + Remove topologic independent components from the mesh Αφαιρέστε τοπολογικά ανεξάρτητα στοιχεία από το πλέγμα @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Κλιμακοποίηση... - + Scale selected meshes Κλιμακοποίηση επιλεγμένων πλεγμάτων @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Δημιουργήστε τομή από πλέγμα και επίπεδο - - + + Section from mesh and plane Τομή από πλέγμα και επίπεδο @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Δημιουργήστε τμήματα πλέγματος... - - + + Create mesh segments Δημιουργήστε τμήματα πλέγματος @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Δημιουργήστε τμήματα πλέγματος από τις βέλτιστες επιφάνειες... - - + + Create mesh segments from best-fit surfaces Δημιουργήστε τμήματα πλέγματος από τις βέλτιστες επιφάνειες @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Εξομάλυνση... - - + + Smooth the selected meshes Εξομαλύνετε τα επιλεγμένα πλέγματα @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Περικοπή ακμών πλέγματος με επίπεδο - - + + Trims a mesh with a plane Περικόπτει τις ακμές ενός πλέγματος με ένα επίπεδο @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Γράφημα καμπυλότητας - - + + Calculates the curvature of the vertices of a mesh Υπολογίζει την καμπυλότητα των κορυφών ενός πλέγματος @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Πληροφορίες καμπυλότητας - - + + Information about curvature Πληροφορίες σχετικά με την καμπυλότητα @@ -1267,7 +1267,17 @@ Please run the command to repair folds first Εξαγωγή αρχείων AMF με τη χρήση συμπίεσης - + + Width: + Πλάτος: + + + + Height: + Ύψος: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Αυτή η παράμετρος υποδεικνύει αν χρησιμοποιείται η συμπίεση ZIP όταν γράφετε ένα αρχείο σε μορφή AMF @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Ορεοθέτηση του %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Προέκυψε άγνωστο σφάλμα κατά την εκτέλεση του OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. To OpenSCAD δεν δύναται να βρεθεί στον υπολογιστή σας. @@ -1975,146 +1985,161 @@ Please visit http://www.openscad.org/index.html to install it. Εισαγωγή-Εξαγωγή - + All Mesh Files Όλα τα Αρχεία Πλεγμάτων - - + + Binary STL Δυαδικό STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Πλέγμα Δυαδικού Συστήματος - - + + Alias Mesh Πλέγμα Alias - - + + Object File Format Μορφή Αρχείου Αντικειμένου - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Πολύγωνο Stanford - - + + All Files Όλα τα Αρχεία - + Import mesh Εισαγωγή πλέγματος - + Simple Model Format Απλή μορφή μοντέλου - + X3D Extensible 3D X3D Επεκτάσιμο 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Συμπιεσμένο VRML 2.0 - + Nastran Nastran - + Python module def Ορισμός λειτουργικής μονάδας Python - + + Asymptote Format + Asymptote Format + + + Export mesh Εξαγωγή πλέγματος - + Meshing Tolerance Ανοχή Πλεγματοποίησης - + Enter tolerance for meshing geometry: Εισάγετε ανοχή για την γεωμετρία πλεγματοποίησης: - + The mesh '%1' is not a solid. Το πλέγμα '%1' δεν είναι στερεό. - + The mesh '%1' is a solid. Το πλέγμα '%1' είναι στερεό. - + Solid Mesh Στερεό Πλέγμα - + Boundings Οριοθετήσεις - + Fill holes Γέμισμα οπών - + Fill holes with maximum number of edges: Γέμισμα οπών με μέγιστο αριθμό ακμών: - + Scaling Κλίμακα - + Enter scaling factor: Εισάγετε συντελεστή κλίμακας: @@ -2124,43 +2149,43 @@ Please visit http://www.openscad.org/index.html to install it. [Σημεία: %1, Ακμές: %2, Όψεις: %3] - + Display components Απεικόνιση στοιχείων - + Display segments Display segments - + Leave info mode Έξοδος από τη λειτουργία πληροφοριών - + Index: %1 Δείκτης: %1 - + Leave hole-filling mode Έξοδος από την λειτουργία γεμίσματος οπών - + Leave removal mode Έξοδος από την λειτουργία αφαίρεσης - + Delete selected faces Διαγραφή επιλεγμένων όψεων - + Clear selected faces Καθαρισμός επιλεγμένων όψεων diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm index d5fc918612..e34e7fa741 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts index 8b778a05c0..a6e8dd4c51 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Malla - + Add triangle Añadir triángulo - - + + Add triangle manually to a mesh Añadir triángulo manualmente en una malla @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Malla - + Boundings info... Información de los límites... - - + + Shows the boundings of the selected mesh Muestra los límites de la malla seleccionada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Malla - + Regular solid... Sólido regular... - - + + Builds a regular solid Crea un sólido regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Malla - + Cross-sections... Cortes transversales... - - + + Cross-sections Cortes transversales @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Malla - + Decimation... Diezmado... - - - + + + Decimates a mesh Diezmar una malla @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Malla - + Difference Diferencia @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Malla - + Face info Información de la cara - - + + Information about face Información de la cara @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Malla - + Check solid mesh Comprobar la malla del sólido - - + + Checks whether the mesh is a solid Comprueba si la malla es un sólido @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Malla - + Evaluate and repair mesh... Evaluar y reparar malla... - - + + Opens a dialog to analyze and repair a mesh Abre un diálogo para analizar y reparar una malla. @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Malla - + Export mesh... Exportar malla... - - + + Exports a mesh to file Exporta la malla a un archivo @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Malla - + Close hole Cerrar agujero - - + + Close holes interactively Cerrar agujeros interactiva-mente @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Malla - + Fill holes... Rellenar agujeros ... - - + + Fill holes of the mesh Rellenar agujeros de la malla @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Malla - + Flip normals Invertir normales - - + + Flips the normals of the mesh Invierte la normal de la malla @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Malla - + Create mesh from geometry... Crea una malla a partir de la geometría... - - + + Create mesh from the selected geometry Crea una malla a partir de la geometría seleccionada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Malla - + Create mesh from shape... Crear malla de forma ... - + Tessellate shape Teselar forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Malla - + Harmonize normals Armoniza las normales - - + + Harmonizes the normals of the mesh Armoniza las normales de la malla. @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Malla - + Import mesh... Importar malla... - - + + Imports a mesh from file Importa una malla desde un archivo @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Malla - + Intersection Intersección @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Malla - + Merge Fusionar - + Merges selected meshes into one Fusionar las mallas seleccionadas en una sola @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Malla - + Cut mesh Cortar malla - - + + Cuts a mesh with a picked polygon Corta una malla con un polígono designado @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Malla - + Make segment Hacer un segmento - - + + Creates a mesh segment Crea un segmento de la malla @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Malla - + Select mesh Seleccionar una malla - - + + Select an area of the mesh Seleccionar un área de la malla @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Malla - + Split mesh Dividir malla - - + + Splits a mesh into two meshes Divide una malla en dos mallas @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Malla - + Trim mesh Recortar malla - - + + Trims a mesh with a picked polygon Recorta una malla con un polígono escogido @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Malla - + Refinement... Refinamiento... - - + + Refine existing mesh Refinar malla existente @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Malla - + Remove components by hand... Elimina los componentes a mano ... - - + + Mark a component to remove it from the mesh Marcar un componente para eliminarlo de la malla @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Malla - + Remove components... Eliminar componentes... - - + + Remove topologic independent components from the mesh Eliminar componentes topológicos independientes de la malla @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Malla - + Scale... Escala... - + Scale selected meshes Escalado de mallas seleccionadas @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Malla - + Create section from mesh and plane Crear sección de malla y del plano - - + + Section from mesh and plane Sección de la malla y del plano @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Malla - + Create mesh segments... Crear segmentos de la malla... - - + + Create mesh segments Crear segmentos de la malla @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Malla - + Create mesh segments from best-fit surfaces... Crear segmentos de malla a partir de superficies con mejor ajuste... - - + + Create mesh segments from best-fit surfaces Crear segmentos de malla a partir de superficies con mejor ajuste @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Malla - + Smooth... Suavizar... - - + + Smooth the selected meshes Suaviza las mallas seleccionadas @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Malla - + Trim mesh with a plane Recortar malla con un plano - - + + Trims a mesh with a plane Ajusta una malla con un plano @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Malla - + Curvature plot Trazado de la curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula la curvatura de los vértices de una malla @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Malla - + Curvature info Información de la curvatura - - + + Information about curvature Información de la curvatura @@ -1267,7 +1267,17 @@ Primero ejecute el comando para reparar los pliegues Exportar archivos AMF utilizando compresión - + + Width: + Ancho: + + + + Height: + Altura: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Este parámetro indica si la compresión ZIP @@ -1923,7 +1933,7 @@ a una apariencia poco realista para superficies curvas mientras que si se usa el Mesh_BoundingBox - + Boundings of %1: Límites de %1: @@ -1931,26 +1941,26 @@ a una apariencia poco realista para superficies curvas mientras que si se usa el Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Se ha producido un error desconocido al ejecutar OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD no parece instalado en su sistema. Por favor visite http://www.openscad.org/index.html para instalarlo. @@ -1972,146 +1982,161 @@ Please visit http://www.openscad.org/index.html to install it. Importar/Exportar - + All Mesh Files Todos los archivos de las mallas - - + + Binary STL Binario STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Malla binaria - - + + Alias Mesh Alias de la malla - - + + Object File Format Formato de archivo del objeto - - + + Inventor V2.1 ascii Inventor ascii V2.1 - - + + Stanford Polygon Polígono Stanford - - + + All Files Todos los Archivos - + Import mesh Importar malla - + Simple Model Format Formato de modelo simple - + X3D Extensible 3D Extensible X3D (*.x3d) 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Comprimido VRML 2.0 - + Nastran Nastran - + Python module def Módulo def de Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exportar la malla - + Meshing Tolerance Tolerancia de la malla - + Enter tolerance for meshing geometry: Introduce la tolerancia para la geometría de la malla: - + The mesh '%1' is not a solid. La malla '%1' no es un sólido. - + The mesh '%1' is a solid. La malla '%1' es un sólido. - + Solid Mesh Malla sólida - + Boundings Límites - + Fill holes Llenar agujeros - + Fill holes with maximum number of edges: Rellenado de los agujeros con el número máximo de los bordes: - + Scaling Escalado - + Enter scaling factor: Introduce el factor de la escala: @@ -2121,43 +2146,43 @@ Please visit http://www.openscad.org/index.html to install it. [Puntos: %1, Aristas: %2, Caras: %3] - + Display components Mostrar los componentes - + Display segments Mostrar segmentos - + Leave info mode Salir del modo información - + Index: %1 Índice: %1 - + Leave hole-filling mode Salir el modo de llenado de agujeros - + Leave removal mode Salir del modo de eliminación - + Delete selected faces Eliminar las caras seleccionadas - + Clear selected faces Borrar las caras seleccionadas diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm index c606ec6132..b3c075de98 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts index ae2db1e5a4..ea26f35c79 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Amarauna - + Add triangle Gehitu triangelua - - + + Add triangle manually to a mesh Gehitu triangelua eskuz amaraun bati @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Amarauna - + Boundings info... Mugen informazioa... - - + + Shows the boundings of the selected mesh Erakutsi hautatutako amaraunaren mugak @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Amarauna - + Regular solid... Solido erregularra... - - + + Builds a regular solid Solido erregular bat eraikitzen du @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Amarauna - + Cross-sections... Zeharkako sekzioak... - - + + Cross-sections Zeharkako sekzioak @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Amarauna - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Amarauna - + Difference Diferentzia @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Amarauna - + Face info Aurpegi-informazioa - - + + Information about face Aurpegiari buruzko informazioa @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Amarauna - + Check solid mesh Egiaztatu amaraun solidoa - - + + Checks whether the mesh is a solid Amaraun bat solidoa den egiaztatzen du @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Amarauna - + Evaluate and repair mesh... Ebaluatu eta konpondu amarauna... - - + + Opens a dialog to analyze and repair a mesh Elkarrizketa-koadro bat irekitzen du amaraun bat analizatu eta konpontzeko @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Amarauna - + Export mesh... Esportatu amarauna... - - + + Exports a mesh to file Amaraun bat fitxategi batera esportatzen du @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Amarauna - + Close hole Itxi zuloa - - + + Close holes interactively Zuloak interaktiboki ixten ditu @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Amarauna - + Fill holes... Bete zuloak... - - + + Fill holes of the mesh Bete amaraunaren zuloak @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Amarauna - + Flip normals Irauli normalak - - + + Flips the normals of the mesh Amaraunaren normalak iraultzen ditu @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Amarauna - + Create mesh from geometry... Sortu amarauna geometriatik... - - + + Create mesh from the selected geometry Sortu amarauna hautatutako geometriatik @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Amarauna - + Create mesh from shape... Sortu amarauna formatik... - + Tessellate shape Teselatu forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Amarauna - + Harmonize normals Harmonizatu normalak - - + + Harmonizes the normals of the mesh Amarauneko normalak harmonizatzen ditu @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Amarauna - + Import mesh... Inportatu amarauna... - - + + Imports a mesh from file Amaraun bat fitxategi batetik inportatzen du @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Amarauna - + Intersection Ebakidura @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Amarauna - + Merge Fusionatu - + Merges selected meshes into one Hautatutako amaraunak fusionatzen ditu bakarra sortuz @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Amarauna - + Cut mesh Moztu amarauna - - + + Cuts a mesh with a picked polygon Amaraun bat mozten du hautatutako poligono batekin @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Amarauna - + Make segment Sortu segmentua - - + + Creates a mesh segment Amaraun-segmentu bat sortzen du @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Amarauna - + Select mesh Hautatu amarauna - - + + Select an area of the mesh Hautatu amaraunaren area bat @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Amarauna - + Split mesh Zatitu amarauna - - + + Splits a mesh into two meshes Amaraun bat bitan zatitzen du @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Amarauna - + Trim mesh Muxarratu amarauna - - + + Trims a mesh with a picked polygon Amarauna muxarratzen du aukeratutako poligono batekin @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Amarauna - + Refinement... Fintzea... - - + + Refine existing mesh Findu lehendik dagoen amarauna @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Amarauna - + Remove components by hand... Kendu osagaiak eskuz... - - + + Mark a component to remove it from the mesh Markatu osagai bat, hura amaraunetik kentzeko @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Amarauna - + Remove components... Kendu osagaiak... - - + + Remove topologic independent components from the mesh Kendu topologikoki independenteak diren osagaiak amaraunetik @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Amarauna - + Scale... Eskala... - + Scale selected meshes Eskalatu hautatutako amaraunak @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Amarauna - + Create section from mesh and plane Sortu sekzioa amaraunetik eta planotik - - + + Section from mesh and plane Sekzioa amaraunetik eta planotik @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Amarauna - + Create mesh segments... Sortu amaraun-segmentuak... - - + + Create mesh segments Sortu amaraun-segmentuak @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Amarauna - + Create mesh segments from best-fit surfaces... Sortu amaraun-segmentuak ondoen doitzen diren azaleretatik... - - + + Create mesh segments from best-fit surfaces Sortu amaraun-segmentuak ondoen doitzen diren azaleretatik @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Amarauna - + Smooth... Leundu... - - + + Smooth the selected meshes Leundu hautatutako amaraunak @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Amarauna - + Trim mesh with a plane Muxarratu amarauna plano batekin - - + + Trims a mesh with a plane Amaraun bat muxarratzen du plano batekin @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Amarauna - + Curvature plot Kurbaduraren trazaketa - - + + Calculates the curvature of the vertices of a mesh Amaraun bateko erpinen kurbadura kalkulatzen du @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Amarauna - + Curvature info Kurbaduraren informazioa - - + + Information about curvature Kurbadurari buruzko informazioa @@ -1267,7 +1267,17 @@ Exekutatu tolesturak zuzentzeko komandoa Esportatu AMF fitxategiak konpresioa erabiliz - + + Width: + Zabalera: + + + + Height: + Altuera: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Parametro honek adierazten du ZIP konpresioa @@ -1926,7 +1936,7 @@ itxura leunagoa ematen du. Mesh_BoundingBox - + Boundings of %1: %1 elementuaren mugak: @@ -1934,26 +1944,26 @@ itxura leunagoa ematen du. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Errore ezezaguna gertatu da OpenSCAD exekutatzean. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. Ez da OpenSCAD aurkitu zure sisteman. @@ -1976,146 +1986,161 @@ Jo http://www.openscad.org/index.html helbidera hura instalatzeko. Inportatu-Esportatu - + All Mesh Files Amaraun-fitxategi guztiak - - + + Binary STL STL bitarra - - - + + + ASCII STL STL ASCIIa - - + + Binary Mesh Amaraun bitarra - - + + Alias Mesh Alias-amarauna - - + + Object File Format Objektu-fitxategiaren formatua - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford poligonoa - - + + All Files Fitxategi guztiak - + Import mesh Inportatu amarauna - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D, 3D hedagarria - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 konprimatua - + Nastran Nastran - + Python module def Phyton moduluaren definizioa - + + Asymptote Format + Asymptote Format + + + Export mesh Esportatu amarauna - + Meshing Tolerance Amarauna sortzeko tolerantzia - + Enter tolerance for meshing geometry: Sartu tolerantzia amaraun-geometriarako: - + The mesh '%1' is not a solid. %1' amarauna ez da solido bat. - + The mesh '%1' is a solid. %1' amarauna solido bat da. - + Solid Mesh Amaraun solidoa - + Boundings Mugak - + Fill holes Bete zuloak - + Fill holes with maximum number of edges: Bete zuloak ertz kopuru maximoarekin: - + Scaling Eskalatzea - + Enter scaling factor: Sartu eskalatze-faktorea: @@ -2125,43 +2150,43 @@ Jo http://www.openscad.org/index.html helbidera hura instalatzeko. [Puntuak: %1, ertzak: %2, aurpegiak: %3] - + Display components Erakutsi osagaiak - + Display segments Bistaratu segmentuak - + Leave info mode Utzi informazio modua - + Index: %1 Indizea: %1 - + Leave hole-filling mode Utzi zuloak betetzeko modua - + Leave removal mode Utzi kentze modua - + Delete selected faces Ezabatu hautatutako aurpegiak - + Clear selected faces Garbitu hautatutako aurpegiak diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm index d9d02a9553..c1a744b385 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts index d5b08857ea..d9efaf7773 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Lisää kolmio - - + + Add triangle manually to a mesh Lisää kolmio käsivaraisesti verkkopintaan @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Rajoituksista tietoa... - - + + Shows the boundings of the selected mesh Näytä valitun verkkopinnan rajat @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Säännöllinen monitahokas... - - + + Builds a regular solid Luo säännöllisen monitahokkaan @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Poikkileikkaukset... - - + + Cross-sections Poikkileikkaukset @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Erotus @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Pinnan tiedot - - + + Information about face Tietoa pinnasta @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Tarkasta kiinteä verkkopinta - - + + Checks whether the mesh is a solid Tarkastaa onko verkkopinta kiinteä @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Avaa valintaikkunan jossa voit analysoida ja korjata verkkopinnan @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Vie verkkopinta... - - + + Exports a mesh to file Vie verkkopinnan tiedot tiedostoon @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Sulje reikä - - + + Close holes interactively Sulje reikiä vuorovaikutteisesti @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Täyttää reiät... - - + + Fill holes of the mesh Täytä verkkopinnan reiät @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Käännä normaalit päinvastaisiksi - - + + Flips the normals of the mesh Käännä verkkopinnan normaalit @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Luo verkkopinta geometriasta... - - + + Create mesh from the selected geometry Luo verkkopinta valitusta geometriasta @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Luo verkkotaso muodosta... - + Tessellate shape Jaa muoto ruutuihin @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Yhdenmukaista normaalit - - + + Harmonizes the normals of the mesh Yhdenmukaistaa verkkopinnan normaalit @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Tuo verkkopinta... - - + + Imports a mesh from file Tuo verkkopinta tiedostosta @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Risteys @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Merge - + Merges selected meshes into one Merges selected meshes into one @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Leikkaa verkkopinta - - + + Cuts a mesh with a picked polygon Leikkaa verkkopinta valitulla monikulmiolla @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Tee lohko - - + + Creates a mesh segment Luo verkkopinnan lohkon @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Valitse verkkopinta - - + + Select an area of the mesh Valitse verkkopinnan alue @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Jaa verkkopinta - - + + Splits a mesh into two meshes Jakaa verkkopinnan kahdeksi verkkopinnaksi @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Viimeistele verkkopinta - - + + Trims a mesh with a picked polygon Viimeistelee verkkopinnan valitulla monikulmiolla @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Poista osia käsin... - - + + Mark a component to remove it from the mesh Merkitse osa, joka poistetaan verkkopinnasta @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Poista osia... - - + + Remove topologic independent components from the mesh Poista topologisesti riippumattomia komponentteja verkkopinnasta @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Luo verkkopinnan lohkoja... - - + + Create mesh segments Luo verkkopinnan lohkoja @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Siloita... - - + + Smooth the selected meshes Siloita valitut verkkopinnat @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Leikkaa vekkopintaan tasolla - - + + Trims a mesh with a plane Leikkaa verkkopintaan tasolla @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Kaarevuuden merkitseminen - - + + Calculates the curvature of the vertices of a mesh Laskee verkkopinnan kärkipisteiden kaarevuuden @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Kaarevuuden tiedot - - + + Information about curvature Tietoja kaarevuudesta @@ -1267,7 +1267,17 @@ Aja ensin komento jolla taitteet poistetaan Export AMF files using compression - + + Width: + Leveys: + + + + Height: + Korkeus: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD openSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD ei löydy järjestelmästäsi. Käy http://www.openscad.org/index.html @@ -1976,146 +1986,161 @@ osoittweessa asentaaksesi ohjelman. Tuo/Vie - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Kaikki tiedostot - + Import mesh Tuo verkkopinta - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Vie verkkopinta - + Meshing Tolerance Verkkopinnoittumisen toleranssi - + Enter tolerance for meshing geometry: Anna verkkopintageometrian toleranssi: - + The mesh '%1' is not a solid. Verkkopinta '%1' ei ole yhtenäinen. - + The mesh '%1' is a solid. Verkkopinta '%1' on yhtenäinen. - + Solid Mesh Eheä verkkopinta - + Boundings Rajat - + Fill holes Täyttää reiät - + Fill holes with maximum number of edges: Täytä reiät suurimmalla mahdollisella määrällä reunoja: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2125,43 +2150,43 @@ osoittweessa asentaaksesi ohjelman. [Points: %1, Edges: %2, Faces: %3] - + Display components Näytä osat - + Display segments Display segments - + Leave info mode Poistu Tieto tilasta - + Index: %1 Indeksi: %1 - + Leave hole-filling mode Jätä reiäntäyttötila - + Leave removal mode Jätä poistotila - + Delete selected faces Tuhoa valitut tahkot - + Clear selected faces Puhdista valitut tahkot diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.qm index 7fa7b33c0f..5046bfaf39 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts index fb76116643..473a3040f9 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Dagdagan ng tatsulok - - + + Add triangle manually to a mesh Manu-manong dagdagan ng tatsulok sa isang mesh @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Boundings info... - - + + Shows the boundings of the selected mesh Ipinapakita ang boundings ng mga napiling mesh @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Regular na solid... - - + + Builds a regular solid Bumubuo ng regular na solid @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Cross-sections... - - + + Cross-sections Cross-sections @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Difference @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Info ng face - - + + Information about face Impormasyon tungkol sa face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh I-check ang solidong mesh - - + + Checks whether the mesh is a solid Nag check kung ang mesh ay isang solid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Nagbubukas ng dialogo para aralin at ayusin ang mesh @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... I-export ang mesh... - - + + Exports a mesh to file Nag e-export ng mesh tungo sa file @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Saradong butas - - + + Close holes interactively Isara ang mga butas interactively @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Punan ang mga holes... - - + + Fill holes of the mesh Punan ang mga butas ng mesh @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Flip normals - - + + Flips the normals of the mesh Flips ang normals ng mesh @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Lumikha ng mesh mula sa geometry... - - + + Create mesh from the selected geometry Lumikha ng mesh mula sa napiling geometry @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Lumikha ng mesh mula sa shape... - + Tessellate shape Tessellate shape @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Nagbibigay harmonya sa normals - - + + Harmonizes the normals of the mesh Binibigyang harmonya ang normals ng mesh @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... I-import ang mest... - - + + Imports a mesh from file Nag-iimport ng mesh mula sa file @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersection @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Pagsamahin - + Merges selected meshes into one Pinagsasama ang mga napiling mesh para maging isa @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Putulin ang mesh - - + + Cuts a mesh with a picked polygon Putulin ang mesh gamit ang napiling polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Gumawa ng segment - - + + Creates a mesh segment Lumilikha ng mesh segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Pumili ng mesh - - + + Select an area of the mesh Pumili ng area ng mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh I-split ang mesh - - + + Splits a mesh into two meshes Ini-split ang mesh para maging dalawang mesh @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh I-trim ang mesh - - + + Trims a mesh with a picked polygon I-trim ang mesh gamit ang napiling polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Alisin ang mga component gamit ang kamay... - - + + Mark a component to remove it from the mesh Markahan ang component para maalis ito mula sa mesh @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Alisin ang mga component... - - + + Remove topologic independent components from the mesh Alisin ang mga topologic independent component mula sa mesh @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes I-scale ang mga napiling mesh @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Lumikha ng section mula sa mesh at plane - - + + Section from mesh and plane Section mula sa mesh at plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Lumikha ng mga mest segment... - - + + Create mesh segments Lumikha ng mga mest segment @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Smooth... - - + + Smooth the selected meshes I-smooth ang mga napiling mesh @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane I-trim ang mesh gamit ang plane - - + + Trims a mesh with a plane Ng trim ng mesh gamit ang plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Plot ng curvature - - + + Calculates the curvature of the vertices of a mesh Nagkakalkula ng curvature ng mga vertices ng mesh @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Info ng curvature - - + + Information about curvature Impormasyon tungkol sa curvature @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Export AMF files gamit ang compression - + + Width: + Lapad: + + + + Height: + Taas: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Hindi matukoy na kamalian na naganap habang ng run ang OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. Hindi matagpuan ang OpenSCAD sa iyong system. Mangyaring bisitahin ang http://www.openscad.org/index.html para i-install ito. @@ -1974,146 +1984,161 @@ Please visit http://www.openscad.org/index.html to install it. Import-Export - + All Mesh Files Lahat ng Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Format ng Object File - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Lahat ng mga File - + Import mesh Import ang mesh - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Export ang mesh - + Meshing Tolerance Tolerance ng Meshing - + Enter tolerance for meshing geometry: I-enter ang tolerance para sa meshing geometry: - + The mesh '%1' is not a solid. Ang mesh '%1' ay hindi isang solid. - + The mesh '%1' is a solid. Ang mesh '%1' ay isang solid. - + Solid Mesh Solid na Mesh - + Boundings Mga Bounding - + Fill holes Punan ang mga hole - + Fill holes with maximum number of edges: Punan ang mga hole ng pinakamataas na bilang ng mga edge: - + Scaling Scaling - + Enter scaling factor: Ilagay ang scaling factor: @@ -2123,43 +2148,43 @@ Please visit http://www.openscad.org/index.html to install it. [Points: %1, Edges: %2, Faces: %3] - + Display components I-display ang mga component - + Display segments Display segments - + Leave info mode Lisanin ang info mode - + Index: %1 Index: %1 - + Leave hole-filling mode Lisanin ang hole-filling mode - + Leave removal mode Lisanin ang removal mode - + Delete selected faces Tanggalin ang mga napiling face - + Clear selected faces I-clear ang mga napiling face diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm index 31762d0c5c..aa9ec45d97 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index b573b59ba9..651dafc695 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Maillage - + Add triangle Ajouter un triangle - - + + Add triangle manually to a mesh Ajouter manuellement un triangle à une maille @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Maillage - + Boundings info... Dimensions extérieures... - - + + Shows the boundings of the selected mesh Affiche les dimensions englobantes du maillage sélectionné @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Maillage - + Regular solid... Solide régulier... - - + + Builds a regular solid Construire un solide régulier @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Maillage - + Cross-sections... Coupes... - - + + Cross-sections Coupes @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Maillage - + Decimation... Décimation... - - - + + + Decimates a mesh Décime un maillage @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Maillage - + Difference Différence @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Maillage - + Face info Infos sur la face - - + + Information about face Informations sur la face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Maillage - + Check solid mesh Vérifier le maillage solide - - + + Checks whether the mesh is a solid Vérifie si le maillage est un solide @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Maillage - + Evaluate and repair mesh... Évaluer et réparer le maillage... - - + + Opens a dialog to analyze and repair a mesh Ouvre une fenêtre permettant d'analyser et de réparer un maillage @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Maillage - + Export mesh... Exporter le maillage... - - + + Exports a mesh to file Exporte le maillage dans un fichier @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Maillage - + Close hole Boucher un trou - - + + Close holes interactively Bouche un trou de manière interactive @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Maillage - + Fill holes... Remplir les trous... - - + + Fill holes of the mesh Remplit un trou de manière interactive @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Maillage - + Flip normals Inverser les normales - - + + Flips the normals of the mesh Inverse les normales du maillage @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Maillage - + Create mesh from geometry... Créer un maillage depuis une géométrie... - - + + Create mesh from the selected geometry Crée un maillage à partir de la géométrie sélectionnée @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Maillage - + Create mesh from shape... Créer un maillage à partir d'une forme... - + Tessellate shape Tessellation de la forme @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Maillage - + Harmonize normals Harmoniser les normales - - + + Harmonizes the normals of the mesh Harmonise les normales du maillage @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Maillage - + Import mesh... Importer un maillage... - - + + Imports a mesh from file Importe un maillage depuis un fichier @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Maillage - + Intersection Intersection @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Maillage - + Merge Fusionner - + Merges selected meshes into one Fusionner les maillages sélectionnées @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Maillage - + Cut mesh Couper le maillage - - + + Cuts a mesh with a picked polygon Coupe un maillage à l'aide du polygone sélectionné @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Maillage - + Make segment Créer un segment - - + + Creates a mesh segment Crée un segment de maillage @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Maillage - + Select mesh Sélectionnez un maillage - - + + Select an area of the mesh Sélectionnez une zone du maillage @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Maillage - + Split mesh Diviser un maillage - - + + Splits a mesh into two meshes Divise un maillage en deux @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Maillage - + Trim mesh Découper - - + + Trims a mesh with a picked polygon Découper un maillage avec une succession de points @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Maillage - + Refinement... Affinage... - - + + Refine existing mesh Affiner le maillage existant @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Maillage - + Remove components by hand... Supprimer manuellement des composants... - - + + Mark a component to remove it from the mesh Marque un composant pour le supprimer du maillage @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Maillage - + Remove components... Supprimer des composants... - - + + Remove topologic independent components from the mesh Supprimer les composants de topologie indépendants du maillage @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Maillage - + Scale... Échelle ... - + Scale selected meshes Mettre à l'échelle les maillages sélectionnés @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Maillage - + Create section from mesh and plane Créer une section à partir d'un maillage et d'un plan - - + + Section from mesh and plane Section à partir d'un maillage et d'un plan @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Maillage - + Create mesh segments... Diviser le maillage... - - + + Create mesh segments Diviser un maillage @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Maillage - + Create mesh segments from best-fit surfaces... Créer des segments de maillage de surfaces ajustées... - - + + Create mesh segments from best-fit surfaces Créer des segments de maillage de surfaces ajustées @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Maillage - + Smooth... Lisser... - - + + Smooth the selected meshes Lisse les maillages sélectionnés @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Maillage - + Trim mesh with a plane Ajuster le maillage avec un plan - - + + Trims a mesh with a plane Ajuste le maillage avec un plan @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Maillage - + Curvature plot Tracé de courbure - - + + Calculates the curvature of the vertices of a mesh Calcule la courbure des sommets du maillage @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Maillage - + Curvature info Infos de courbure - - + + Information about curvature Informations sur la courbure @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exporter les fichiers AMF en utilisant la compression - + + Width: + Largeur : + + + + Height: + Hauteur : + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Ce paramètre indique si la compression ZIP @@ -1925,7 +1935,7 @@ Avec l'ombrage à plat les normales de surface ne sont pas définies par un somm Mesh_BoundingBox - + Boundings of %1: Límites de %1: @@ -1933,26 +1943,26 @@ Avec l'ombrage à plat les normales de surface ne sont pas définies par un somm Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Une erreur inconnue s’est produite lors de l’exécution d'OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD n'as pas pu être trouvé dans votre système. @@ -1975,146 +1985,161 @@ Merci de visiter http://www.openscad.org/index.html pour l'installer.Importer-Exporter - + All Mesh Files Tous les fichiers de maillage - - + + Binary STL STL binaire - - - + + + ASCII STL STL ASCII - - + + Binary Mesh Maillage binaire - - + + Alias Mesh Maillage Alias - - + + Object File Format Format de fichier Objet - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Polygone Stanford - - + + All Files Tous les fichiers - + Import mesh Importer un maillage - + Simple Model Format Modèle simple Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 compressé - + Nastran Nastran - + Python module def Définition de module Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exporter un maillage - + Meshing Tolerance Tolérance de maillage - + Enter tolerance for meshing geometry: Saisir la tolérance pour la géométrie maillée : - + The mesh '%1' is not a solid. Le maillage '%1' n'est pas un solide. - + The mesh '%1' is a solid. Le maillage '%1' est un solide. - + Solid Mesh Maillage solide - + Boundings Limites englobantes - + Fill holes Remplir les trous - + Fill holes with maximum number of edges: Remplir les trous avec un nombre maximum de contours : - + Scaling Mettre à l'échelle - + Enter scaling factor: Entrez le facteur d’échelle : @@ -2124,43 +2149,43 @@ Merci de visiter http://www.openscad.org/index.html pour l'installer.[Points : %1, Arêtes : %2, Faces : %3] - + Display components Afficher les composants - + Display segments Afficher les segments - + Leave info mode Quitter le mode d'information - + Index: %1 Index : %1 - + Leave hole-filling mode Quitter le mode de remplissage des trous - + Leave removal mode Quitter le mode de suppression - + Delete selected faces Supprimer les faces sélectionnées - + Clear selected faces Dé-sélectionner les faces sélectionnées diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm index d86cbf67d1..18f614872b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts index 5c9fa29755..dacca3cebc 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Engadir triángulo - - + + Add triangle manually to a mesh Engadir triángulo a malla manualmente @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Información de límites... - - + + Shows the boundings of the selected mesh Amosa os límites da malla escolmada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Sólido regular... - - + + Builds a regular solid Constrúe un sólido regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Cortes transversais... - - + + Cross-sections Cortes transversais @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Diferencia @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Información da face - - + + Information about face Información sobre face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Verificar a malla do sólido - - + + Checks whether the mesh is a solid Verifica se a malla é un sólido @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Avaliar e arranxar a malla... - - + + Opens a dialog to analyze and repair a mesh Abre unha xanela para analizar e reparar a malla @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exportar Malla... - - + + Exports a mesh to file Exportar unha malla para un ficheiro @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Pechar furado - - + + Close holes interactively Pechar buratos iterativamente @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Reencher buratos... - - + + Fill holes of the mesh Reencher furados da malla @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inverter normais - - + + Flips the normals of the mesh Inverte as normais da malla @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Crear malla a partir da xeometría... - - + + Create mesh from the selected geometry Crea una malla a partir dunha xeometría escolmada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Crear malla dende forma... - + Tessellate shape Forma teselada @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmonizar normais - - + + Harmonizes the normals of the mesh Harmoniza as normais da malla @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importar Malla... - - + + Imports a mesh from file Importa unha malla dun ficheiro @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersección @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Fundir - + Merges selected meshes into one Funde as mallas escollidas nunha soa @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Tallar malla - - + + Cuts a mesh with a picked polygon Talla unha malla cun polígono escollido @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Facer segmento - - + + Creates a mesh segment Fai un segmento da malla @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Escolmar malla - - + + Select an area of the mesh Escolma unha área da malla @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Dividir malla - - + + Splits a mesh into two meshes Divide a malla en dúas @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Tallar malla - - + + Trims a mesh with a picked polygon Talla unha malla cun polígono escollido @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Desbotar compoñentes a man... - - + + Mark a component to remove it from the mesh Marca un compoñente para o rexeitar da malla @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Rexeitar compoñentes... - - + + Remove topologic independent components from the mesh Remove compoñentes topolóxicos independentes da malla @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Escala... - + Scale selected meshes Escalar mallas selecionadas @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Facer sección a partir de malla e plano - - + + Section from mesh and plane Sección a partir de malla e plano @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Crear segmentos de malla... - - + + Create mesh segments Crea segmentos de malla @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Cera segmentos de malla dende as superficies que mellor axustan... - - + + Create mesh segments from best-fit surfaces Crea segmentos de malla das superficies que mellor axustan @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Suavizar... - - + + Smooth the selected meshes Suaviza as mallas escolmadas @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Tallar malla cun plano - - + + Trims a mesh with a plane Tallar unha malla cun plano @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Trazado da curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula a curvatura dos vértices da malla @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Información da curvatura - - + + Information about curvature Información sobre a curvatura @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exportar ficheiros AMF usando compresión - + + Width: + Ancho: + + + + Height: + Alto: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Iste parámetro indica uso de compresión ZIP cando escribe ficheiros en formato AMF @@ -1924,7 +1934,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Límites de %1: @@ -1932,26 +1942,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Ocorreu un erro descoñecido namentres corría OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. O OpenSCAD non se atopou no seu sistema. @@ -1974,146 +1984,161 @@ Por favor visite http://www.openscad.org/index.html para instalalo.Importar-Exportar - + All Mesh Files Tódolos ficheiros de malla - - + + Binary STL Binario STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binario de malla - - + + Alias Mesh Alcume da malla - - + + Object File Format Formato do ficheiro do obxecto - - + + Inventor V2.1 ascii Inventor v 2.1 ascii - - + + Stanford Polygon Polígono de Stanford - - + + All Files Tódolos ficheiros - + Import mesh Importar malla - + Simple Model Format Formato de Modelo Sinxelo - + X3D Extensible 3D X3D Extensíbel 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML v 2.0 - + Compressed VRML 2.0 VRML 2.0 comprimido - + Nastran Nastran - + Python module def Definición do módulo Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exportar malla - + Meshing Tolerance Tolerancia da malla - + Enter tolerance for meshing geometry: Introduza a tolerancia para a xeometría da malla: - + The mesh '%1' is not a solid. A malla '%1' non é un sólido. - + The mesh '%1' is a solid. A malla '%1' é un sólido. - + Solid Mesh Malla sólida - + Boundings Límites - + Fill holes Reencher buratos - + Fill holes with maximum number of edges: Reencher buratos coa cantidade máxima de arestas: - + Scaling Escalar - + Enter scaling factor: Inserir factor de escala: @@ -2123,43 +2148,43 @@ Por favor visite http://www.openscad.org/index.html para instalalo.[Puntos: %1, Arestas: %2, Faces: %3] - + Display components Amosar compoñentes - + Display segments Display segments - + Leave info mode Saír do modo de información - + Index: %1 Índice: %1 - + Leave hole-filling mode Saír do modo de reenchido de buratos - + Leave removal mode Saír do modo de rexeitado - + Delete selected faces Desbotar as faces escolmadas - + Clear selected faces Baleirar faces escolmadas diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm index 4bb8ec5bdf..3811334519 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts index bd52cebe64..e9b7b6191e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mreža - + Add triangle Dodaj trokut - - + + Add triangle manually to a mesh Ručno dodaj trokut mreži @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mreža - + Boundings info... Informacije o granicama... - - + + Shows the boundings of the selected mesh Prikazuje granicu odabrane mreže @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mreža - + Regular solid... Obično tijelo... - - + + Builds a regular solid Kreira obično tijelo @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mreža - + Cross-sections... Presjeci... - - + + Cross-sections Presjeci @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mreža - + Decimation... Desetkovanje... - - - + + + Decimates a mesh Desetkuj mrežu @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mreža - + Difference Razlika @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mreža - + Face info Informacije Lice - - + + Information about face Informacije o površini @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mreža - + Check solid mesh Provjerite tijelo mreže - - + + Checks whether the mesh is a solid Provjerava dali je li mreža tijelo @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mreža - + Evaluate and repair mesh... Procijena i popravak mreže... - - + + Opens a dialog to analyze and repair a mesh Otvara dijalog za analizu i popravak mreže @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mreža - + Export mesh... Izvoz mreže - - + + Exports a mesh to file Izvoz mreže u datoteku @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mreža - + Close hole Zatvori rupe - - + + Close holes interactively Zatvori rupe interaktivno @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mreža - + Fill holes... Ispuni rupe... - - + + Fill holes of the mesh Ispuni rupe mreže @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mreža - + Flip normals Zrcali normale - - + + Flips the normals of the mesh Zrcali normale mreže @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mreža - + Create mesh from geometry... Stvaranje mreže iz geometrije ... - - + + Create mesh from the selected geometry Stvori mrežu od odabranih objekata @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mreža - + Create mesh from shape... Stvori mrežu od oblika ... - + Tessellate shape Pretvori oblik u mrežu @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mreža - + Harmonize normals Uskladi normale - - + + Harmonizes the normals of the mesh Usklađuje normale mreže @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mreža - + Import mesh... Uvezi mrežu... - - + + Imports a mesh from file Uvoz mreže iz datoteke @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mreža - + Intersection Presjek @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mreža - + Merge Spoji - + Merges selected meshes into one Spaja odabrane mreže u jednu @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mreža - + Cut mesh Izreži mrežu - - + + Cuts a mesh with a picked polygon Presjeca mrežu sa odabranim poligonom @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mreža - + Make segment Stvori segment - - + + Creates a mesh segment Stvara segment mreže @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mreža - + Select mesh Odaberi mrežu - - + + Select an area of the mesh Odaberite područje mreže @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mreža - + Split mesh Podjeli mrežu - - + + Splits a mesh into two meshes Podijeli mrežu na dva dijela @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mreža - + Trim mesh Izreži mrežu - - + + Trims a mesh with a picked polygon Presjeca mrežu sa odabranim poligonom @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mreža - + Refinement... Izglađivanje... - - + + Refine existing mesh Izgladi postojeću mrežu @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mreža - + Remove components by hand... Ukloniti komponente ručno... - - + + Mark a component to remove it from the mesh Označi komponenta koju želite uklonili iz mreže @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mreža - + Remove components... Ukloniti komponente... - - + + Remove topologic independent components from the mesh Izvadite komponente neovisne o topologiji iz mreže @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mreža - + Scale... Skalirajte... - + Scale selected meshes Skaliranje odabranih mreža @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mreža - + Create section from mesh and plane Stvori presjek iz mreže i ravnine - - + + Section from mesh and plane Presjek iz mreže i ravnine @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mreža - + Create mesh segments... Kreiraj segmente mreže... - - + + Create mesh segments Kreiraj segmente mreže @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mreža - + Create mesh segments from best-fit surfaces... Stvaranje mreže segmenta od površina sa najboljim uklapanjem... - - + + Create mesh segments from best-fit surfaces Stvaranje mreže segmenta od površina sa najboljim uklapanjem @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mreža - + Smooth... Izgladi... - - + + Smooth the selected meshes Izgladi odabranu mrežu @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mreža - + Trim mesh with a plane Obrezivanje mreže s ravninom - - + + Trims a mesh with a plane Obrezuje mrežu s ravninom @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mreža - + Curvature plot Iscrtavanje krivina - - + + Calculates the curvature of the vertices of a mesh Izračunava zakrivljenost vrhova mreže @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mreža - + Curvature info Informacije krivina - - + + Information about curvature Informacije o zakrivljenosti @@ -1267,7 +1267,17 @@ Molimo pokrenite naredbu za popravak nabora Izvoz AMF datoteke pomoću kompresije - + + Width: + Širina: + + + + Height: + Duljina: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Ovaj parametar pokazuje koja ZIP kompresija je korištena za zapis u AMF formatu @@ -1927,7 +1937,7 @@ vodi do uglađenijeg izgleda. Mesh_BoundingBox - + Boundings of %1: Ograničenje od %1: @@ -1935,26 +1945,26 @@ vodi do uglađenijeg izgleda. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Pojavila se nepoznata pogreška pri izvršavanju OpenSCAD-a. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nije moguće pronaći na vašem sustavu. @@ -1977,146 +1987,161 @@ Posjetite http://www.openscad.org/index.html da biste ga instalirali.Uvoz / izvoz - + All Mesh Files Sve datoteke mreže - - + + Binary STL Binarno STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binarno Mreža - - + + Alias Mesh Nadimak mreže - - + + Object File Format Format Datoteke Objekta - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford poligon - - + + All Files Sve datoteke - + Import mesh Uvezi mrežu - + Simple Model Format Jednostavan Model Format - + X3D Extensible 3D X3D Proširena 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Komprimirani VRML 2.0 - + Nastran Nastran finite element analysis (FEA) - + Python module def Python modul def - + + Asymptote Format + Asymptote Format + + + Export mesh Izvezi mrežu - + Meshing Tolerance Tolerancija mreže - + Enter tolerance for meshing geometry: Unesite toleranciju geometrije mreže: - + The mesh '%1' is not a solid. Mreža '%1' nije tijelo. - + The mesh '%1' is a solid. Mreža '%1' je tijelo. - + Solid Mesh Čvrsta mreža - + Boundings Granice - + Fill holes Ispuni rupe - + Fill holes with maximum number of edges: Ispunite rupe s maksimalnim brojem rubova: - + Scaling Skaliranje - + Enter scaling factor: Unesite faktor skaliranja: @@ -2126,43 +2151,43 @@ Posjetite http://www.openscad.org/index.html da biste ga instalirali.[Točke: %1, Rubovi: %2, Lica: %3] - + Display components Prikaz komponenti - + Display segments Prikaži segmente - + Leave info mode Zatvori info način rada - + Index: %1 Indeks: %1 - + Leave hole-filling mode Zatvori način rada za popunjavanje otvora - + Leave removal mode Zatvori način rada za uklanjanje - + Delete selected faces Izbriši odabrane površine - + Clear selected faces Izbriši odabrane površine diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm index 26d6893e79..238026cc27 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts index fb62235776..61f11eaf66 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Háromszöget adjon hozzá - - + + Add triangle manually to a mesh Adjon háromszöget kézzel a hálóhoz @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Határolók információi... - - + + Shows the boundings of the selected mesh Megmutatja a kiválasztott háló határvonalait @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Szabályos szilárd test... - - + + Builds a regular solid Szabályos szilárd testet épít @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Keresztmetszet... - - + + Cross-sections Keresztmetszet @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Különbség @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Felület infó - - + + Information about face Információ a felületről @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Szilárd háló ellenőrzése - - + + Checks whether the mesh is a solid Ellenőrzi, ha a háló egy szilárd testet ad ki @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Háló értékelése & javítása... - - + + Opens a dialog to analyze and repair a mesh Megnyit egy párbeszédablakot, a háló elemzéséhez és javításához @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Háló exportálása... - - + + Exports a mesh to file Fájlba exportálja a hálót @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Lyukat bezárja - - + + Close holes interactively Interaktívan bezárja a lyukakat @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Lyukak kitöltése... - - + + Fill holes of the mesh A hálón lévő lyukak kitöltése @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Normák tükrözés - - + + Flips the normals of the mesh A háló normák tükrözése @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Háló létrehozása a geometriából... - - + + Create mesh from the selected geometry Háló létrehozása a kijelölt geometriából @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Hálós test létrehozása alakzatból... - + Tessellate shape Mozaik alakja @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Normák összehangolása - - + + Harmonizes the normals of the mesh A hálón lévő normák összehangolása @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Háló importálása... - - + + Imports a mesh from file A háló importálása fájlból @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Metszet @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Egyesítés - + Merges selected meshes into one Egyesíti a kiválasztott hálótesteket @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Háló vágása - - + + Cuts a mesh with a picked polygon Háló kivágása a kiválasztott sokszög rácsvonallal @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Szegmens létrehozása - - + + Creates a mesh segment A háló szegmens létrehozása @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Háló kijelölése - - + + Select an area of the mesh Jelöljön egy területet a hálón @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Háló osztása - - + + Splits a mesh into two meshes Háló osztása két részre @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Háló levágása - - + + Trims a mesh with a picked polygon A háló levágása kiválasztott sokszöggel @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Távolítsa el kézzel az összetevőket... - - + + Mark a component to remove it from the mesh Egy összetevő megjelölése a hálóból való eltávolításához @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Összetevők eltávolítása... - - + + Remove topologic independent components from the mesh Vegye ki a topológiailag független részegységeket a hálóból @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Lépték... - + Scale selected meshes Kiválasztott hálók skálázása @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Létrehoz egy szakaszt a hálóból és a síkból - - + + Section from mesh and plane Szakasz a hálóból és a síkból @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Háló szegmensek létrehozása... - - + + Create mesh segments Háló szegmensek létrehozása @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Háló szegmensek létrehozása a legjobban illeszkedő felületekből... - - + + Create mesh segments from best-fit surfaces Háló szegmensek létrehozása a legjobban illeszkedő felületekből @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Simítás... - - + + Smooth the selected meshes Kiválasztott háló simítása @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Egy síkkal metszi a hálótestet - - + + Trims a mesh with a plane Egy síkkal metsz egy hálótestet @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Görbület terv - - + + Calculates the curvature of the vertices of a mesh Kiszámítja egy háló csúcspont görbületét @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Görbület információ - - + + Information about curvature Görbület információk @@ -1267,7 +1267,17 @@ Kérjük először futtassa a hajlítás javítása parancsot AMF-fájlok exportálása tömörítéssel - + + Width: + Szélesség: + + + + Height: + Magasság: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Ez a paraméter azt jelzi, hogy a program használ-e ZIP-tömörítést a fájlok AMF formátumban történő írásakor @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: %1 kötései: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Ismeretlen hiba történt az OpenSCAD futása közben. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nem található a rendszeren. Kérjük, látogasson el ide: http://www.openscad.org/index.html a telepítéshez. @@ -1974,146 +1984,161 @@ Please visit http://www.openscad.org/index.html to install it. Importálás-Exportálás - + All Mesh Files Minden hálótest fájl - - + + Binary STL Bináris STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Bináris hálótest - - + + Alias Mesh Ál hálótest - - + + Object File Format Tárgy fájl formátum - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford sokszög - - + + All Files Összes fájl - + Import mesh Háló importálása - + Simple Model Format Egyszerű modell formátum - + X3D Extensible 3D X3D bővíthető 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Tömörített VRML 2.0 - + Nastran Nastran - + Python module def Python modul def - + + Asymptote Format + Asymptote Format + + + Export mesh Háló exportálása - + Meshing Tolerance Hálózás tűrése - + Enter tolerance for meshing geometry: Adja meg a tűrést az erővonal geometriájának: - + The mesh '%1' is not a solid. A(z)'%1' háló nem szilárd test. - + The mesh '%1' is a solid. A(z) '%1' háló egy szilárd test. - + Solid Mesh Szilárd test háló - + Boundings Csatlakozások - + Fill holes Furatok kitöltése - + Fill holes with maximum number of edges: Töltse ki a furatokat maximális számú élekkel: - + Scaling Méretezés - + Enter scaling factor: Adja meg a skálafaktort: @@ -2123,43 +2148,43 @@ Please visit http://www.openscad.org/index.html to install it. [Pontok: %1, élek: %2, felületek: %3] - + Display components Összetevők megjelenítése - + Display segments Display segments - + Leave info mode Hagyja az info módot - + Index: %1 Index: %1 - + Leave hole-filling mode Hagyja lyuk betöltő üzemmódban - + Leave removal mode Hagyja eltávolítása módban - + Delete selected faces Törli a kijelölt felületeket - + Clear selected faces Felületek kiválasztásának törlése diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.qm index 482de2e092..fe52b9e87b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts index a5cb8e68fb..b72353c2c7 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Tambahkan segitiga - - + + Add triangle manually to a mesh Add triangle manually to a mesh @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Ikatan info... - - + + Shows the boundings of the selected mesh Menunjukkan ikatan tautan yang dipilih @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Biasa padat... - - + + Builds a regular solid Membangun solid biasa @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Persimpangan... - - + + Cross-sections Persimpangan @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Perbedaan @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Wajah info - - + + Information about face Informasi tentang wajah @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Check solid mesh - - + + Checks whether the mesh is a solid Memeriksa apakah mesh itu padat @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Membuka dialog untuk menganalisa dan memperbaiki jala @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Ekspor mesh... - - + + Exports a mesh to file Ekspor mesh ke file @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Tutup lubang - - + + Close holes interactively Tutup lubang secara interaktif @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Isi lubang... - - + + Fill holes of the mesh Isi lubang jala @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Flip normal - - + + Flips the normals of the mesh Membalik normals dari jala @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Buat jala dari geometri... - - + + Create mesh from the selected geometry Buat jala dari yang dipilih geometri @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Create mesh from shape... - + Tessellate shape Tessellate shape @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmonis normal - - + + Harmonizes the normals of the mesh Selaras dengan normals dari jala @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Impor mesh... - - + + Imports a mesh from file Impor mesh dari file @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Persimpangan @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Menggabungkan - + Merges selected meshes into one Menggabungkan jerat terpilih menjadi satu @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Potong jala - - + + Cuts a mesh with a picked polygon Memotong jaring dengan poligon pilihan @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Buat segmen - - + + Creates a mesh segment Creates a mesh segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Pilih jala - - + + Select an area of the mesh Pilih area mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Split jaring - - + + Splits a mesh into two meshes Perpecahan jala menjadi dua jerat @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Pangkas jaring - - + + Trims a mesh with a picked polygon Potong jala dengan poligon pilihan @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Hapus komponen dengan tangan... - - + + Mark a component to remove it from the mesh Menandai komponen untuk menghapusnya dari para jala @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Hapus komponen... - - + + Remove topologic independent components from the mesh Hapus komponen independen topologic dari para jala @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Skala... - + Scale selected meshes Skala jerat dipilih @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Buat bagian dari mesh dan plane - - + + Section from mesh and plane Bagian dari jala dan pesawat @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Buat segmen jaring... - - + + Create mesh segments Buat segmen jaring @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Halus... - - + + Smooth the selected meshes Haluskan jaring yang dipilih @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Pangkas jaring dengan pesawat - - + + Trims a mesh with a plane Potong jala dengan pesawat @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Plot lengkungan - - + + Calculates the curvature of the vertices of a mesh Menghitung kelengkungan dari simpul dari jala @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Info kelengkungan - - + + Information about curvature Informasi tentang kelengkungan @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Ekspor file AMF menggunakan kompresi - + + Width: + Lebar: + + + + Height: + Tinggi: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD Buka Scad - - - + + + Unknown error occurred while running OpenSCAD. Terjadi kesalahan yang tidak diketahui saat menjalankan OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD tidak dapat ditemukan di sistem anda. Silakan kunjungi http://www.openscad.org/index.html untuk menginstalnya. @@ -1974,146 +1984,161 @@ Please visit http://www.openscad.org/index.html to install it. Ekspor Impor - + All Mesh Files Semua File Mesh - - + + Binary STL Biner STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Objek File Format - - + + Inventor V2.1 ascii Penemu V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Semua data - + Import mesh Impor mesh - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Modul python def - + + Asymptote Format + Asymptote Format + + + Export mesh Ekspor mesh - + Meshing Tolerance Meshing Toleransi - + Enter tolerance for meshing geometry: Masukkan toleransi untuk geometri meshing: - + The mesh '%1' is not a solid. Jala ' % 1 ' bukan padat. - + The mesh '%1' is a solid. Jaringan ' % 1 ' adalah padat. - + Solid Mesh Solid Mesh - + Boundings Boundings - + Fill holes Isi lubang - + Fill holes with maximum number of edges: Isi lubang dengan jumlah maksimum tepi: - + Scaling Scaling - + Enter scaling factor: Masukkan faktor penskalaan: @@ -2123,43 +2148,43 @@ Please visit http://www.openscad.org/index.html to install it. [Poin: % 1 , Tepi: % 2 , Wajah: % 3 ] - + Display components Menampilkan komponen - + Display segments Display segments - + Leave info mode Tinggalkan info mode - + Index: %1 Indeks: % 1 - + Leave hole-filling mode Tinggalkan mode pengisian lubang - + Leave removal mode Tinggalkan mode penghapusan - + Delete selected faces Hapus wajah yang dipilih - + Clear selected faces Hapus wajah yang dipilih diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm index a8e4221f28..8088ba4485 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts index 136acfb006..0088241e20 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Aggiungi triangolo - - + + Add triangle manually to a mesh Aggiunge manualmente un triangolo alla mesh @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... - Info Limiti contenitore... + Info limiti d'ingombro... - - + + Shows the boundings of the selected mesh Mostra le coordinate dei limiti del contenitore della mesh selezionata @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Solido regolare... - - + + Builds a regular solid Costruisce un solido regolare @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Sezioni... - - + + Cross-sections Sezioni @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimazione... - - - + + + Decimates a mesh Decima una mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Differenza @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Dettagli faccia - - + + Information about face Informazioni sulla faccia @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Controlla se è un solido - - + + Checks whether the mesh is a solid Controlla se l'oggetto mesh è un solido @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... - Valuta e ripara mesh... + Valuta e ripara la mesh... - - + + Opens a dialog to analyze and repair a mesh Apre una finestra di dialogo per analizzare e riparare una mesh @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Esporta mesh... - - + + Exports a mesh to file Esporta la mesh in un file @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Chiudi il foro - - + + Close holes interactively Chiude i buchi in modo interattivo @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Riempi i buchi... - - + + Fill holes of the mesh Riempie i fbuchi della mesh @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inverti le normali - - + + Flips the normals of the mesh Inverte le normali della mesh @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Crea una mesh da una geometria... - - + + Create mesh from the selected geometry Crea una mesh dalla geometria selezionata @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Crea mesh da una forma... - + Tessellate shape Forma della tessellazione @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Armonizza le normali - - + + Harmonizes the normals of the mesh Armonizza le normali della mesh @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importa mesh... - - + + Imports a mesh from file Importa una mesh da file @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersezione @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Unisci - + Merges selected meshes into one Unisce le Mesh selezionate in una unica @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh - Taglia con un poligono + Taglia la mesh - - + + Cuts a mesh with a picked polygon Taglia la mesh con un poligono @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Crea un segmento - - + + Creates a mesh segment Crea un segmento di mesh @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Seleziona mesh - - + + Select an area of the mesh Seleziona un'area della mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Dividi la mesh - - + + Splits a mesh into two meshes Divide la mesh in due mesh @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Rifila con un poligono - - + + Trims a mesh with a picked polygon Taglia una mesh con un poligono selezionato @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Affinamento... - - + + Refine existing mesh Affina le mesh esistenti @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Rimuovi componenti a mano... - - + + Mark a component to remove it from the mesh Segna un componente per rimuoverlo dalla mesh @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Rimuovi componente... - - + + Remove topologic independent components from the mesh Rimuove i componenti topologici indipendenti dalla mesh @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scala... - + Scale selected meshes Scala le mesh selezionate @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane - Crea una sezione da mesh e piano + Sezione da mesh e piano - - + + Section from mesh and plane Sezione da mesh e piano @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Crea segmenti di mesh... - - + + Create mesh segments Crea segmenti di mesh @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... - Crea segmenti mesh delle superfici che si adattano meglio... + Adatta i segmenti... - - + + Create mesh segments from best-fit surfaces Crea segmenti mesh delle superfici che si adattano meglio @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Leviga... - - + + Smooth the selected meshes Leviga le mesh selezionate @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Rifila con un piano - - + + Trims a mesh with a plane Rifila una mesh con un piano @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Grafico della curvatura - - + + Calculates the curvature of the vertices of a mesh Calcola la curvatura dei vertici di una mesh @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info - Dettagli curvatura + Dettagli della curvatura - - + + Information about curvature Informazioni sulla curvatura @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Esporta i file AMF utilizzando la compressione - + + Width: + Larghezza: + + + + Height: + Altezza: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Questo parametro indica se la compressione ZIP @@ -1588,7 +1598,7 @@ Usando l'ombreggiatura piana, le normali alla superficie non saranno determinate Remesh by gmsh - Ricostruisci con gmsh + Rigenera con gmsh @@ -1921,7 +1931,7 @@ Usando l'ombreggiatura piana, le normali alla superficie non saranno determinate Mesh_BoundingBox - + Boundings of %1: Limiti di %1: @@ -1929,26 +1939,26 @@ Usando l'ombreggiatura piana, le normali alla superficie non saranno determinate Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Si è verificato un errore sconosciuto durante l'esecuzione di OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD non può essere trovato sul tuo sistema. Visita http://www.openscad.org/index.html per installarlo. @@ -1970,146 +1980,161 @@ Please visit http://www.openscad.org/index.html to install it. Importa/Esporta - + All Mesh Files Tutti i file Mesh - - + + Binary STL STL binario - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binario Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor ascii V2.1 - - + + Stanford Polygon Poligono Stanford - - + + All Files Tutti i file - + Import mesh Importa mesh - + Simple Model Format Formato del modello semplice - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML v 2.0 - + Compressed VRML 2.0 Compresso VRML 2.0 - + Nastran Nastran - + Python module def Modulo def di Python - + + Asymptote Format + Asymptote Format + + + Export mesh Esporta mesh - + Meshing Tolerance Tolleranza Mesh - + Enter tolerance for meshing geometry: Inserisci la tolleranza per la geometria della mesh - + The mesh '%1' is not a solid. - La mesh '%1' non è un solido. + L'oggetto mesh '%1' non è un solido. - + The mesh '%1' is a solid. - La mesh '%1' è un solido. + L'oggetto mesh '%1' è un solido. - + Solid Mesh Mesh solida - + Boundings Limiti - + Fill holes Riempi i buchi - + Fill holes with maximum number of edges: Numero massimo di spigoli per riempire i buchi: - + Scaling Scalatura - + Enter scaling factor: Immettere il fattore di scala: @@ -2119,43 +2144,43 @@ Please visit http://www.openscad.org/index.html to install it. [Punti: %1, bordi: %2, facce: %3] - + Display components Visualizza i componenti - + Display segments Mostra i segmenti - + Leave info mode Esci dalla modalità info - + Index: %1 Indice: %1 - + Leave hole-filling mode Esci dalla modalità riempimento dei buchi - + Leave removal mode Esci dalla modalità rimozione - + Delete selected faces Elimina le facce selezionate - + Clear selected faces Cancella le facce selezionate diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm index 132f7de54f..4bcb01fd17 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts index b045e7f460..d2b8229cfa 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle 三角形を追加 - - + + Add triangle manually to a mesh 手動でメッシュに三角形を追加 @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... バウンディングボックス情報... - - + + Shows the boundings of the selected mesh 選択されたメッシュのバウンディングボックスを表示します @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... 正多面体... - - + + Builds a regular solid 正多面体を作成 @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... 断面... - - + + Cross-sections 断面 @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... 間引き... - - - + + + Decimates a mesh メッシュを間引きする @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference 差集合 @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info 面の情報 - - + + Information about face 面の情報 @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh ソリッドメッシュをチェック - - + + Checks whether the mesh is a solid メッシュがソリッドかどうか調べる @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... メッシュの検査と修復... - - + + Opens a dialog to analyze and repair a mesh メッシュの分析・修復ダイアログを開く @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... メッシュをエクスポート... - - + + Exports a mesh to file メッシュをファイルにエクスポート @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole 穴をふさぐ - - + + Close holes interactively 対話形式で穴を閉じる @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... 穴を閉じる... - - + + Fill holes of the mesh メッシュの穴を閉じる @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals 法線を反転 - - + + Flips the normals of the mesh メッシュの法線を反転 @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... ジオメトリからメッシュを作成... - - + + Create mesh from the selected geometry 選択されたジオメトリからメッシュを作成します @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... シェイプからメッシュを作成... - + Tessellate shape シェイプをテッセレーションします。 @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals 法線を一致 - - + + Harmonizes the normals of the mesh メッシュの法線の向きを一致させます @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... メッシュをインポート... - - + + Imports a mesh from file ファイルからメッシュをインポートします @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection 共通集合 @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge マージ - + Merges selected meshes into one 選択されたメッシュを一つにマージさせます @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh メッシュを切断 - - + + Cuts a mesh with a picked polygon 選択ポリゴンでメッシュを切断します @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment セグメントを作成 - - + + Creates a mesh segment メッシュのセグメントを作成します @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh メッシュを選択 - - + + Select an area of the mesh メッシュを領域で選択します @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh メッシュを分割 - - + + Splits a mesh into two meshes メッシュを2つのメッシュに分割します @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh メッシュをトリム - - + + Trims a mesh with a picked polygon 選択ポリゴンでメッシュをトリムします @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... リファイン... - - + + Refine existing mesh 既存のメッシュをリファイン @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... 手動によるコンポーネントの削除... - - + + Mark a component to remove it from the mesh メッシュから削除するコンポーネントを選択します @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... コンポーネントの削除... - - + + Remove topologic independent components from the mesh トポロジーとして独立しているコンポーネントをメッシュから削除します @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... 拡大縮小... - + Scale selected meshes 選択したメッシュを拡大縮小 @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane メッシュと平面から断面を作成 - - + + Section from mesh and plane メッシュと平面による断面 @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... メッシュセグメントを作成... - - + + Create mesh segments メッシュのセグメントを作成します @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... 最もフィットするサーフェスからメッシュのセグメントを作成... - - + + Create mesh segments from best-fit surfaces 最も一致するサーフェスからメッシュのセグメントを作成。 @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... スムージング - - + + Smooth the selected meshes 選択したメッシュを滑らかにします @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane 平面上のメッシュをトリム - - + + Trims a mesh with a plane 平面上のメッシュを1つトリム @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot 曲率プロット - - + + Calculates the curvature of the vertices of a mesh メッシュの頂点の曲率を計算します @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info 曲率の情報 - - + + Information about curvature 曲率の情報を表示します @@ -1267,7 +1267,17 @@ Please run the command to repair folds first 圧縮を使用してAMFファイルをエクスポート - + + Width: + 幅： + + + + Height: + 高さ: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format このパラメータは、AMF形式のフォイルを書き込むときにZIP圧縮を使用するかを指示します @@ -1920,7 +1930,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: %1 の境界: @@ -1928,26 +1938,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. OpenSCAD の実行中に、不明なエラーが発生しました。 - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD がシステムに見つかりません。 @@ -1970,146 +1980,161 @@ Please visit http://www.openscad.org/index.html to install it. インポート/エクスポート - + All Mesh Files 全てのメッシュファイル - - + + Binary STL バイナリーSTL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh バイナリーメッシュ - - + + Alias Mesh Aliasメッシュ - - + + Object File Format オブジェクトファイル形式 - - + + Inventor V2.1 ascii Inventor V2.1 ASCII - - + + Stanford Polygon スタンフォードポリゴン - - + + All Files すべてのファイル - + Import mesh メッシュをインポート - + Simple Model Format シンプルモデルフォーマット - + X3D Extensible 3D X3D 拡張 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 圧縮済み VRML 2.0 - + Nastran Nastran - + Python module def Pythonモジュール定義 - + + Asymptote Format + Asymptote Format + + + Export mesh メッシュをエクスポート - + Meshing Tolerance メッシュ処理のトレランス - + Enter tolerance for meshing geometry: ジオメトリーのメッシュ処理用のトレランスを入力: - + The mesh '%1' is not a solid. メッシュ '%1' はソリッドではありません。 - + The mesh '%1' is a solid. '%1'はソリッドメッシュです。 - + Solid Mesh ソリッドメッシュ - + Boundings バウンディングボックス - + Fill holes 穴を埋める - + Fill holes with maximum number of edges: 最大数以下のエッジを持つ穴を埋める: - + Scaling 拡大縮小 - + Enter scaling factor: 倍率を入力: @@ -2119,43 +2144,43 @@ Please visit http://www.openscad.org/index.html to install it. [点: %1, 線: %2 面: %3] - + Display components 表示コンポーネント - + Display segments セグメントを表示 - + Leave info mode 情報モードを解除 - + Index: %1 インデックス: %1 - + Leave hole-filling mode 穴埋めモードを解除 - + Leave removal mode 削除モードを解除 - + Delete selected faces 選択した面を削除 - + Clear selected faces 面の選択を全て解除 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.qm index f0bffa0a98..54197e8b75 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts index 4aafe70ffd..d4471cc34c 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_kab.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Ajouter un triangle - - + + Add triangle manually to a mesh Ajouter manuellement un triangle à une maille @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Dimensions extérieures... - - + + Shows the boundings of the selected mesh Affiche les dimensions englobantes du maillage sélectionné @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Solide régulier... - - + + Builds a regular solid Construire un solide régulier @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Coupes... - - + + Cross-sections Coupes @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Différence @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Infos sur la face - - + + Information about face Informations sur la face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Vérifier le maillage solide - - + + Checks whether the mesh is a solid Vérifie si le maillage est un solide @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Ouvre une fenêtre permettant d'analyser et de réparer un maillage @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exporter le maillage... - - + + Exports a mesh to file Exporte le maillage dans un fichier @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Boucher un trou - - + + Close holes interactively Bouche un trou de manière interactive @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Remplir les trous... - - + + Fill holes of the mesh Remplit un trou de manière interactive @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inverser les normales - - + + Flips the normals of the mesh Inverse les normales du maillage @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Créer un maillage depuis une géométrie... - - + + Create mesh from the selected geometry Crée un maillage à partir de la géométrie sélectionnée @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Créer un maillage à partir d'une forme... - + Tessellate shape Tessellation de la forme @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmoniser les normales - - + + Harmonizes the normals of the mesh Harmonise les normales du maillage @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importer un maillage... - - + + Imports a mesh from file Importe un maillage depuis un fichier @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersection @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Fusionner - + Merges selected meshes into one Fusionner les maillages sélectionnées @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Couper le maillage - - + + Cuts a mesh with a picked polygon Coupe un maillage à l'aide du polygone sélectionné @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Créer un segment - - + + Creates a mesh segment Crée un segment de maillage @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Sélectionnez un maillage - - + + Select an area of the mesh Sélectionnez une zone du maillage @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Diviser un maillage - - + + Splits a mesh into two meshes Divise un maillage en deux @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Découper - - + + Trims a mesh with a picked polygon Découper un maillage avec une succession de points @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Supprimer manuellement des composants... - - + + Mark a component to remove it from the mesh Marque un composant pour le supprimer du maillage @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Supprimer des composants... - - + + Remove topologic independent components from the mesh Supprimer les composants de topologie indépendants du maillage @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Diviser le maillage... - - + + Create mesh segments Diviser un maillage @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Lisser... - - + + Smooth the selected meshes Lisse les maillages sélectionnés @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Ajuster le maillage avec un plan - - + + Trims a mesh with a plane Ajuste le maillage avec un plan @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Tracé de courbure - - + + Calculates the curvature of the vertices of a mesh Calcule la courbure des sommets du maillage @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Infos de courbure - - + + Information about curvature Informations sur la courbure @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + Largeur : + + + + Height: + Hauteur : + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD n'as pas pu être trouvé dans votre système. @@ -1975,146 +1985,161 @@ Merci de visiter http://www.openscad.org/index.html pour l'installer.Importer-Exporter - + All Mesh Files Tous les fichiers de maillage - - + + Binary STL STL binaire - - - + + + ASCII STL STL ASCII - - + + Binary Mesh Maillage binaire - - + + Alias Mesh Maillage Alias - - + + Object File Format Format de fichier Objet - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Polygone Stanford - - + + All Files Tous les fichiers - + Import mesh Importer un maillage - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 compressé - + Nastran Nastran - + Python module def Définition de module Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exporter un maillage - + Meshing Tolerance Tolérance de maillage - + Enter tolerance for meshing geometry: Saisir la tolérance pour la géométrie maillée : - + The mesh '%1' is not a solid. Le maillage '%1' n'est pas un solide. - + The mesh '%1' is a solid. Le maillage '%1' est un solide. - + Solid Mesh Maillage solide - + Boundings Limites englobantes - + Fill holes Remplir les trous - + Fill holes with maximum number of edges: Remplir les trous avec un nombre maximum de contours : - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2124,43 +2149,43 @@ Merci de visiter http://www.openscad.org/index.html pour l'installer.[Points : %1, Arêtes : %2, Faces : %3] - + Display components Afficher les composants - + Display segments Display segments - + Leave info mode Quitter le mode d'information - + Index: %1 Index : %1 - + Leave hole-filling mode Quitter le mode de remplissage des trous - + Leave removal mode Quitter le mode de suppression - + Delete selected faces Supprimer les faces sélectionnées - + Clear selected faces Dé-sélectionner les faces sélectionnées diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm index 25ad0768f4..8a474d156b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts index b79c4e56ae..941deb0cfa 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Add triangle - - + + Add triangle manually to a mesh 삼각형을 메시에 수동으로 추가 @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Boundings 정보... - - + + Shows the boundings of the selected mesh 선택된 메시의 boundings 표시 @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... 일반 솔리드... - - + + Builds a regular solid 일반 솔리드 만들기 @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... 횡단면... - - + + Cross-sections 횡단면 @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference 차이 @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info 평면 정보 - - + + Information about face Information about face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh 솔리드 메쉬 검사 - - + + Checks whether the mesh is a solid 메쉬가 솔리드인지 검사 @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh 메쉬의 분석/수정을 위한 대화상자 열기 @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... 메쉬 내보내기... - - + + Exports a mesh to file 메쉬 파일로 내보냅니다. @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Close hole - - + + Close holes interactively Close holes interactively @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Fill holes... - - + + Fill holes of the mesh 메시의 구멍 채우기 @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Flip normals - - + + Flips the normals of the mesh Flips the normals of the mesh @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Create mesh from geometry... - - + + Create mesh from the selected geometry Create mesh from the selected geometry @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... 쉐이프에서 메쉬 생성... - + Tessellate shape 쉐이프 테셀레이션 @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmonize normals - - + + Harmonizes the normals of the mesh Harmonizes the normals of the mesh @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... 메시 가지오기 - - + + Imports a mesh from file 메쉬를 파일에서 가져오기 @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection 교집합 @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge 병합 - + Merges selected meshes into one 선택된 메쉬를 하나로 병합 @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh 메쉬 자르기 - - + + Cuts a mesh with a picked polygon 메쉬를 선택한 다각형으로 자르기 @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Make segment - - + + Creates a mesh segment Creates a mesh segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh 메쉬를 선택 - - + + Select an area of the mesh Select an area of the mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh 메쉬 분할 - - + + Splits a mesh into two meshes 하나의 메쉬를 2개로 분할 @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh 메쉬 다듬기 - - + + Trims a mesh with a picked polygon 선택한 다각형으로 메쉬를 다듬기 @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Remove components by hand... - - + + Mark a component to remove it from the mesh Mark a component to remove it from the mesh @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Remove components... - - + + Remove topologic independent components from the mesh Remove topologic independent components from the mesh @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Create mesh segments... - - + + Create mesh segments Create mesh segments @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Smooth... - - + + Smooth the selected meshes Smooth the selected meshes @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Trim mesh with a plane - - + + Trims a mesh with a plane Trims a mesh with a plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Curvature plot - - + + Calculates the curvature of the vertices of a mesh Calculates the curvature of the vertices of a mesh @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Curvature info - - + + Information about curvature Information about curvature @@ -1267,7 +1267,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + 너비: + + + + Height: + 높이: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD cannot be found on your system. @@ -1976,146 +1986,161 @@ Please visit http://www.openscad.org/index.html to install it. 가져오기 내보내기 - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files 모든 파일 - + Import mesh 메시 불러오기 - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh 메시 내보내기 - + Meshing Tolerance Meshing Tolerance - + Enter tolerance for meshing geometry: Enter tolerance for meshing geometry: - + The mesh '%1' is not a solid. The mesh '%1' is not a solid. - + The mesh '%1' is a solid. The mesh '%1' is a solid. - + Solid Mesh Solid Mesh - + Boundings Boundings - + Fill holes Fill holes - + Fill holes with maximum number of edges: Fill holes with maximum number of edges: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2125,43 +2150,43 @@ Please visit http://www.openscad.org/index.html to install it. [Points: %1, Edges: %2, Faces: %3] - + Display components Display components - + Display segments Display segments - + Leave info mode Leave info mode - + Index: %1 Index: %1 - + Leave hole-filling mode Leave hole-filling mode - + Leave removal mode Leave removal mode - + Delete selected faces Delete selected faces - + Clear selected faces Clear selected faces diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm index 9b3390297e..772e567e47 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts index ffc4dbb0c8..cd1eaa6d93 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Tinklas - + Add triangle Pridėti trikampį - - + + Add triangle manually to a mesh Pridėti trikampį prie tinklo rankiniu būdu @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Tinklas - + Boundings info... Informacija apie ribas... - - + + Shows the boundings of the selected mesh Rodyti pasirinkto tinklo ribas @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Tinklas - + Regular solid... Taisyklingasis pilnaviduris daugiasienis... - - + + Builds a regular solid Sukuria taisyklingąjį pilnavidurį daugiasienį @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Tinklas - + Cross-sections... Skerspjūviai... - - + + Cross-sections Skerspjūviai @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Tinklas - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Tinklas - + Difference Atimtis @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Tinklas - + Face info Paviršiaus duomenys - - + + Information about face Duomenys apie paviršių @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Tinklas - + Check solid mesh Patikrinti tūrinį tinklą - - + + Checks whether the mesh is a solid Tikrina, ar tinklas yra tūrinis (pilnaviduris) objektas @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Tinklas - + Evaluate and repair mesh... Patikrinti ir pataisyti tinklą... - - + + Opens a dialog to analyze and repair a mesh Atveria langą tinklo tikrinimui ir pataisymui @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Tinklas - + Export mesh... Eksportuoti tinklą... - - + + Exports a mesh to file Eksportuoja tinklą į failą @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Tinklas - + Close hole Užaklinti skylę - - + + Close holes interactively Užaklinti skyles perklausiant @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Tinklas - + Fill holes... Užpildyti skyles... - - + + Fill holes of the mesh Užpildyti tinklo skyles @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Tinklas - + Flip normals Apgręžti normales - - + + Flips the normals of the mesh Apgręžia tinklo normales @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Tinklas - + Create mesh from geometry... Sukurti tinklą iš geometrijos... - - + + Create mesh from the selected geometry Sukurti tinklą iš pasirinktos geometrijos @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Tinklas - + Create mesh from shape... Sukurti daikto tinklą... - + Tessellate shape Versti paviršių į daugiasienį @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Tinklas - + Harmonize normals Suderinti normales - - + + Harmonizes the normals of the mesh Suderina tinklo normales @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Tinklas - + Import mesh... Importuoti tinklą... - - + + Imports a mesh from file Importuoja tinklą iš failo @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Tinklas - + Intersection Sankirta @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Tinklas - + Merge Apjungti - + Merges selected meshes into one Apjungia pažymėtus tinklus į vieną @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Tinklas - + Cut mesh Apkarpyti tinklą - - + + Cuts a mesh with a picked polygon Apkarpo tinklą pasirinktu daugiakampiu @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Tinklas - + Make segment Sukurti atkarpą - - + + Creates a mesh segment Sukuria tinklo atkarpą @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Tinklas - + Select mesh Pasirinkti tinklą - - + + Select an area of the mesh Pasirinkite tinklo sritį @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Tinklas - + Split mesh Skelti tinklą - - + + Splits a mesh into two meshes Skelia tinklą į du tinklelius @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Tinklas - + Trim mesh Apipjauti tinklą - - + + Trims a mesh with a picked polygon Apkarpo tinklą pasirinktu daugiakampiu @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Tinklas - + Refinement... Patobulinti... - - + + Refine existing mesh Patobulinti esamą tinklą @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Tinklas - + Remove components by hand... Pašalinti dalis rankiniu būdu... - - + + Mark a component to remove it from the mesh Pažymėkite dalį pašalinimui iš tinklo @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Tinklas - + Remove components... Pašalinti dalis... - - + + Remove topologic independent components from the mesh Pašalinti topologiškai nepriklausomas dalis iš tinklo @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Tinklas - + Scale... Mastelis... - + Scale selected meshes Pasirinktų tinklų dydžio keitimas @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Tinklas - + Create section from mesh and plane Sukurti pjūvį iš tinklo ir plokštumos - - + + Section from mesh and plane Tinklo ir plokštumos pjūvis @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Tinklas - + Create mesh segments... Tinklo atkarpos kūrimas... - - + + Create mesh segments Sukuria tinklo atkarpas @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Tinklas - + Create mesh segments from best-fit surfaces... Sukurti tinklo atkarpas iš geriausiai pritaikytų paviršių... - - + + Create mesh segments from best-fit surfaces Sukurti tinklo atkarpas iš geriausiai pritaikytų paviršių @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Tinklas - + Smooth... Glodinti... - - + + Smooth the selected meshes Glodinti pažymėtus tinklus @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Tinklas - + Trim mesh with a plane Perpjauti tinklą su plokštuma - - + + Trims a mesh with a plane Perpjauna tinklą su plokštuma @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Tinklas - + Curvature plot Kreivio diagrama - - + + Calculates the curvature of the vertices of a mesh Apskaičiuoja tinklo viršūnių kreivumo spindulius @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Tinklas - + Curvature info Kreivio duomenys - - + + Information about curvature Duomenys apie kreivį @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Eksportuoti glaudintus AMF failus - + + Width: + Width: + + + + Height: + Height: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Šis dydis parodo ar ZIP suglaudinimas yra naudojamas įrašant į rinkmeną AMF formatu @@ -1919,7 +1929,7 @@ Naudojant plokštuminį šešėliavimą, paviršiaus normalės nėra skaičiuoja Mesh_BoundingBox - + Boundings of %1: %1 ribos: @@ -1927,26 +1937,26 @@ Naudojant plokštuminį šešėliavimą, paviršiaus normalės nėra skaičiuoja Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Leidžiant OpenSCAD įvyko nežinoma klaida. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nerastas jūsų kompiuteryje. @@ -1969,146 +1979,161 @@ Norėdami įdiegti programą, prašome aplankyti http://www.openscad.org/index.h Importas-Eksportas - + All Mesh Files Visų rūšių tinklo failai - - + + Binary STL Dvejetainis STL - - - + + + ASCII STL Tekstinis STL - - + + Binary Mesh Dvejetainis tinklas - - + + Alias Mesh Alias tinklas - - + + Object File Format Objekto failo formatas - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Visi failai - + Import mesh Importuoti tinklą - + Simple Model Format Paprastas modelio formatas - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Suglaudintas VRML 2.0 - + Nastran Nastran - + Python module def Python modulio def - + + Asymptote Format + Asymptote Format + + + Export mesh Eksportuoti tinklą - + Meshing Tolerance Leidžiamieji tinklo nuokrypiai - + Enter tolerance for meshing geometry: Įveskite leidžiamą nuokrypį geometriją apibrėžiančiam tinklui: - + The mesh '%1' is not a solid. Tinklas '%1' nėra pilnaviduris. - + The mesh '%1' is a solid. Tinklas '%1' yra pilnaviduris. - + Solid Mesh Pilnaviduris (vientisinis) tinklas - + Boundings Apribojimai - + Fill holes Užpildyti skyles - + Fill holes with maximum number of edges: Užpildyti skyles, turinčias daugiausiai briaunų: - + Scaling Pritaikyti dydį - + Enter scaling factor: Įveskite mastelį: @@ -2118,43 +2143,43 @@ Norėdami įdiegti programą, prašome aplankyti http://www.openscad.org/index.h [Taškų: %1, briaunų: %2, daugiakampių: %3] - + Display components Atvaizduoti dalis - + Display segments Rodyti atkarpas - + Leave info mode Išeiti iš duomenų pateikimo režimo - + Index: %1 Indeksas: %1 - + Leave hole-filling mode Išeiti iš skylių užpildymo režimo - + Leave removal mode Išeiti iš šalinimo režimo - + Delete selected faces Pašalinti pasirinktus daugiakampius - + Clear selected faces Išvalyti pasirinktus daugiakampius diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm index 273720ee10..741c2c0e7e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index 1921ae2b3c..9d484b6aaa 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Driehoek toevoegen - - + + Add triangle manually to a mesh Handmatig een driehoek toevoegen aan een gaas @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Begrenzingsinfo... - - + + Shows the boundings of the selected mesh Toont de begrenzingen van het geselecteerde mesh @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Regelmatig volumemodel... - - + + Builds a regular solid Bouwt volumemodel @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Dwarsdoorsneden... - - + + Cross-sections Dwarsdoorsneden @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimatie... - - - + + + Decimates a mesh Decimeert een rooster @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Verschil @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Vlak-info - - + + Information about face Informatie over vlak @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Controleer vast maaswerk - - + + Checks whether the mesh is a solid Controleert of het maaswerk een volumemodel is @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evalueer en repareer maaswerk... - - + + Opens a dialog to analyze and repair a mesh Opent een venster voor analyse en reparatie van een maaswerk @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Gaas exporteren... - - + + Exports a mesh to file Exporteert een gaas naar een bestand @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Dicht gat - - + + Close holes interactively Sluit gaten interactief @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Vul gaten... - - + + Fill holes of the mesh Gaten in het gaas vullen @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Loodlijnen spiegelen - - + + Flips the normals of the mesh De normalen van het gaas omkeren @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Genereer maaswerk vanuit geometrie... - - + + Create mesh from the selected geometry Genereer maaswerk vanuit geselecteerde vorm @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Maak een mesh van vorm... - + Tessellate shape Betegel vorm @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmoniseer loodlijnen - - + + Harmonizes the normals of the mesh Harmoniseert de loodlijnen van de mesh @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Mesh importeren... - - + + Imports a mesh from file Importeer een mesh uit een bestand @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Snijpunt @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Samenvoegen - + Merges selected meshes into one Voegt geselecteerde maaswerken samen tot één enkele @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Snij de msh - - + + Cuts a mesh with a picked polygon Een mesh snijden met een geselecteerde polygoon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Maak segment - - + + Creates a mesh segment Maakt een mesh segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Gaas selecteren - - + + Select an area of the mesh Selecteer een gebied van de mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Verdeel de mesh - - + + Splits a mesh into two meshes Verdeelt een gaas in twee gazen @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Gaas bijsnijden - - + + Trims a mesh with a picked polygon Snijdt een maaswerk met een geselecteerde veelhoek @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Verfijning... - - + + Refine existing mesh Verfijn bestaande mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Verwijder componenten met de hand... - - + + Mark a component to remove it from the mesh Markeer een te verwijderen deel in de mesh @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Verwijder componenten... - - + + Remove topologic independent components from the mesh Ruimtelijk onafhankelijke onderdelen van het maaswerk verwijderen @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Schaal... - + Scale selected meshes Geselecteerde maaswerken schalen @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Genereer doorsnede van maaswerk en vlak - - + + Section from mesh and plane Doorsnede van maaswerk en vlak @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Genereer maaswerk-segmenten... - - + + Create mesh segments Gaassegmenten aanmaken @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Genereer maaswerk-segmenten uit meest passende oppervlakken... - - + + Create mesh segments from best-fit surfaces Genereer maaswerk-segmenten uit meest passende oppervlakken @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Glad... - - + + Smooth the selected meshes De geselecteerde meshes glad maken @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Maaswerk bijsnijden met een vlak - - + + Trims a mesh with a plane Snijdt een maaswerk bij met een vlak @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Kromming definitie - - + + Calculates the curvature of the vertices of a mesh Berekent de kromming van de hoekpunten binnen een maaswerk @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Kromming info - - + + Information about curvature Informatie over kromming @@ -1267,7 +1267,17 @@ Please run the command to repair folds first AMF-bestanden exporteren met behulp van compressie - + + Width: + Breedte: + + + + Height: + Hoogte: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Deze parameter geeft aan of ZIP-compressie @@ -1926,7 +1936,7 @@ tot een gladder uiterlijk leidt. Mesh_BoundingBox - + Boundings of %1: Begrenzingen van %1: @@ -1934,26 +1944,26 @@ tot een gladder uiterlijk leidt. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Er is een onbekende fout opgetreden tijdens het uitvoeren van OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD kan niet worden gevonden op uw systeem. @@ -1976,146 +1986,161 @@ Gelieve naar http://www.openscad.org/index.html te gaan om het te installeren.Importeren-Exporteren - + All Mesh Files Alle mesh bestanden - - + + Binary STL Binair STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binaire mesh - - + + Alias Mesh Alias mesh - - + + Object File Format Object Bestandsformaat - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygoon - - + + All Files Alle bestanden - + Import mesh Gaas importeren - + Simple Model Format Eenvoudig modelformaat - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Gaas exporteren - + Meshing Tolerance Meshingtolerantie - + Enter tolerance for meshing geometry: Voer tolerantie in voor de meshinggeometrie: - + The mesh '%1' is not a solid. De mesh '%1' is geen volumemodel. - + The mesh '%1' is a solid. De mesh '%1' is een volumemodel. - + Solid Mesh Solid Mesh - + Boundings Begrenzingen - + Fill holes Vul gaten - + Fill holes with maximum number of edges: Vul de gaten met maximaal aantal randen: - + Scaling Schalen - + Enter scaling factor: Geef schaal factor: @@ -2125,43 +2150,43 @@ Gelieve naar http://www.openscad.org/index.html te gaan om het te installeren.[Punten: %1, randen: %2, gezichten: %3] - + Display components Geef componenten weer - + Display segments Segmenten weergeven - + Leave info mode Info modus verlaten - + Index: %1 Index: %1 - + Leave hole-filling mode Gatvulmodus verlaten - + Leave removal mode Verwijdermodus verlaten - + Delete selected faces Verwijder geselecteerde vlakken - + Clear selected faces Geselecteerde vlakken wissen diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm index 9dd338b779..7641dede46 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts index 1210e21ffd..8865cf30dc 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Nett - + Add triangle Legg til triangel - - + + Add triangle manually to a mesh Legg triangel manuelt til et nett @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Nett - + Boundings info... Rammeinfo... - - + + Shows the boundings of the selected mesh Viser ramme for valgt nett @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Nett - + Regular solid... Vanlig solid... - - + + Builds a regular solid Bygger en vanlig solid @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Nett - + Cross-sections... Tverrsnitt... - - + + Cross-sections Tverrsnitt @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Nett - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Nett - + Difference Differanse @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Nett - + Face info Flateinfo - - + + Information about face Informasjon om falte @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Nett - + Check solid mesh Sjekk solid nett - - + + Checks whether the mesh is a solid Kontrollerer om nettet er en solid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Nett - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Åpner en dialog for å analysere og reparere et nett @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Nett - + Export mesh... Eksporter nett... - - + + Exports a mesh to file Eksporterer et nett til fil @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Nett - + Close hole Lukk hull - - + + Close holes interactively Lukk hull interaktivt @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Nett - + Fill holes... Fyll hull... - - + + Fill holes of the mesh Fyll hull i nettet @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Nett - + Flip normals Vend normaler - - + + Flips the normals of the mesh Vender normaler på nettet @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Nett - + Create mesh from geometry... Lag nett av geometri... - - + + Create mesh from the selected geometry Lag nett fra valgt geometri @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Nett - + Create mesh from shape... Lag nett fra figur... - + Tessellate shape Tessellér figur @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Nett - + Harmonize normals Harmoniser normaler - - + + Harmonizes the normals of the mesh Harmoniserer normaler i nett @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Nett - + Import mesh... Importer nett... - - + + Imports a mesh from file Importerer et nett fra fil @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Nett - + Intersection Kryssningspunkt @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Nett - + Merge Merge - + Merges selected meshes into one Merges selected meshes into one @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Nett - + Cut mesh Klipp ut nett - - + + Cuts a mesh with a picked polygon Klipper ut et nett med en valgt polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Nett - + Make segment Lag segment - - + + Creates a mesh segment Lager et nettsegment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Nett - + Select mesh Velg nett - - + + Select an area of the mesh Velg et område i nettet @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Nett - + Split mesh Del nett - - + + Splits a mesh into two meshes Deler et nett i to @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Nett - + Trim mesh Trim mesh - - + + Trims a mesh with a picked polygon Trims a mesh with a picked polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Nett - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Nett - + Remove components by hand... Fjern elementer for hånd... - - + + Mark a component to remove it from the mesh Velg et element å fjerne fra nettet @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Nett - + Remove components... Fjern elementer... - - + + Remove topologic independent components from the mesh Remove topologic independent components from the mesh @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Nett - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Nett - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Nett - + Create mesh segments... Create mesh segments... - - + + Create mesh segments Create mesh segments @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Nett - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Nett - + Smooth... Jevn ut... - - + + Smooth the selected meshes Jevn ut valgte nett @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Nett - + Trim mesh with a plane Trim mesh with a plane - - + + Trims a mesh with a plane Trims a mesh with a plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Nett - + Curvature plot Krummingsplot - - + + Calculates the curvature of the vertices of a mesh Beregner krumningen rundt noder i et nett @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Nett - + Curvature info Krummingsinfo - - + + Information about curvature Informasjon om krumning @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + Bredde: + + + + Height: + Høyde: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD cannot be found on your system. @@ -1975,146 +1985,161 @@ Please visit http://www.openscad.org/index.html to install it. Import-Export - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files All Files - + Import mesh Importer nett - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Eksporter nett - + Meshing Tolerance Toleranse for nett - + Enter tolerance for meshing geometry: Angi toleranse for nettgeometri: - + The mesh '%1' is not a solid. Nett '%1' er ikke solid. - + The mesh '%1' is a solid. Nett '%1' er solid. - + Solid Mesh Solid nett - + Boundings Rammer - + Fill holes Fyll hull - + Fill holes with maximum number of edges: Fyll hull med maksimalt antall kanter: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2124,43 +2149,43 @@ Please visit http://www.openscad.org/index.html to install it. [Points: %1, Edges: %2, Faces: %3] - + Display components Display components - + Display segments Display segments - + Leave info mode Forlat infomodus - + Index: %1 Indeks: %1 - + Leave hole-filling mode Forlat hullfyllingsmodus - + Leave removal mode Forlat fjerningsmodus - + Delete selected faces Slett valgte flater - + Clear selected faces Fjern valgte flater diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm index 12504e4959..e30df915ea 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index 9cb916d91c..029740d137 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Siatka - + Add triangle Dodaj trójkąt - - + + Add triangle manually to a mesh Dodaj trójkąt do siatki @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Siatka - + Boundings info... Informacje o granicach... - - + + Shows the boundings of the selected mesh Pokazuje granice wybranej siatki @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Siatka - + Regular solid... Bryła podstawowa... - - + + Builds a regular solid Zbuduje bryłę podstawową @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Siatka - + Cross-sections... Przekrój poprzeczny... - - + + Cross-sections Przekrój poprzeczny @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Siatka - + Decimation... Decydująca... - - - + + + Decimates a mesh Wyznacza siatkę @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Siatka - + Difference Różnica @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Siatka - + Face info Informacje o powierzchni - - + + Information about face Informacje na temat powierzchni @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Siatka - + Check solid mesh Sprawdź siatkę bryły - - + + Checks whether the mesh is a solid Sprawdza czy siatka jest bryłą @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Siatka - + Evaluate and repair mesh... Oceń i napraw siatkę... - - + + Opens a dialog to analyze and repair a mesh Otwiera okno dialogowe do analizy i naprawy siatki @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Siatka - + Export mesh... Eksport siatki... - - + + Exports a mesh to file Eksport siatki do pliku @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Siatka - + Close hole Zamknij otwór - - + + Close holes interactively Zamknij otwory interaktywnie @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Siatka - + Fill holes... Wypełnij otwory... - - + + Fill holes of the mesh Zamknij otwory w siatce @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Siatka - + Flip normals Odwróć wektory normalne - - + + Flips the normals of the mesh Odwróć wektory normalne siatki @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Siatka - + Create mesh from geometry... Utwórz siatkę z geometrii... - - + + Create mesh from the selected geometry Utwórz siatkę z wybranej geometrii @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Siatka - + Create mesh from shape... Utwórz siatkę z kształtu... - + Tessellate shape Tesselacja obwiedni @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Siatka - + Harmonize normals Porządkuj wektory normalne - - + + Harmonizes the normals of the mesh Porządkuje wektory normalne siatki @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Siatka - + Import mesh... Import siatki... - - + + Imports a mesh from file Importuj siatkę z pliku @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Siatka - + Intersection Przecięcie @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Siatka - + Merge Scal - + Merges selected meshes into one Połącz wybrane siatki @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Siatka - + Cut mesh Cięcie siatki - - + + Cuts a mesh with a picked polygon Wycina siatkę za pomocą wybranego wielokąta @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Siatka - + Make segment Utwórz segment - - + + Creates a mesh segment Tworzy segment siatki @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Siatka - + Select mesh Wybierz siatkę - - + + Select an area of the mesh Zaznacz fragment siatki @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Siatka - + Split mesh Podziel siatkę - - + + Splits a mesh into two meshes Rozdziel siatkę na dwie siatki @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Siatka - + Trim mesh Przytnij siatkę - - + + Trims a mesh with a picked polygon Przycina siatkę za pomocą wybranego wielokąta @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Siatka - + Refinement... Ulepszanie... - - + + Refine existing mesh Ulepsz istniejącą siatkę @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Siatka - + Remove components by hand... Usuń fragmenty ręcznie... - - + + Mark a component to remove it from the mesh Zaznacz fragment do usunięcia z siatki @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Siatka - + Remove components... Usuń fragmenty... - - + + Remove topologic independent components from the mesh Usuń topologię niezależną od siatki @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Siatka - + Scale... Skaluj... - + Scale selected meshes Skaluj zaznaczone siatki @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Siatka - + Create section from mesh and plane Utwórz przekrój z siatki i płaszczyzny - - + + Section from mesh and plane Przekrój z siatki i płaszczyzny @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Siatka - + Create mesh segments... Utwórz segmenty siatki... - - + + Create mesh segments Utwórz segmenty siatki @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Siatka - + Create mesh segments from best-fit surfaces... Utwórz segmenty siatki z najlepiej dopasowanych powierzchni... - - + + Create mesh segments from best-fit surfaces Utwórz segmenty siatki z najlepiej dopasowanych powierzchni @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Siatka - + Smooth... Wygładź... - - + + Smooth the selected meshes Wygładź zaznaczone siatki @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Siatka - + Trim mesh with a plane Przytnij siatkę za pomocą płaszczyzny - - + + Trims a mesh with a plane Przycina siatkę za pomocą płaszczyzny @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Siatka - + Curvature plot Wykres krzywizny - - + + Calculates the curvature of the vertices of a mesh Oblicza krzywiznę wierzchołków siatki @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Siatka - + Curvature info Informacje o krzywiźnie - - + + Information about curvature Informacje na temat krzywizny @@ -1267,7 +1267,17 @@ Najpierw uruchom polecenie do naprawy zagięć Eksportowanie plików AMF przy użyciu kompresji - + + Width: + Szerokość: + + + + Height: + Wysokość: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Ten parametr wskazuje, czy kompresja ZIP @@ -1284,7 +1294,7 @@ jest używana przy zapisywaniu pliku w formacie AMF Default appearance for new meshes - Domyślny wygląd nowych siatek + Domyślny wygląd dla nowych siatek @@ -1926,7 +1936,7 @@ do gładszego wyglądu. Mesh_BoundingBox - + Boundings of %1: Granice %1: @@ -1934,26 +1944,26 @@ do gładszego wyglądu. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Wystąpił nieznany błąd podczas uruchamiania OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nie został odnaleziony w Twoim systemie. @@ -1976,146 +1986,161 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować.Import-Eksport - + All Mesh Files Wszystkie pliki siatek - - + + Binary STL Binarny STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binarny plik siatki - - + + Alias Mesh Jako Siatka (Mesh) - - + + Object File Format Format pliku obiektu - - + + Inventor V2.1 ascii Inventor V2.1 w ASCII - - + + Stanford Polygon Stanford Polygon - - + + All Files Wszystkie pliki - + Import mesh Import siatki - + Simple Model Format Prosty Format Modelu - + X3D Extensible 3D X3D rozszerzenie 3D (*. x3d) - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Skompresowany VRML 2.0 - + Nastran Nastran - + Python module def Moduły Pythona - + + Asymptote Format + Asymptote Format + + + Export mesh Eksport siatki - + Meshing Tolerance Tolerancja siatki - + Enter tolerance for meshing geometry: Wprowadź tolerancję dla geometrii siatki: - + The mesh '%1' is not a solid. Siatka '%1' nie jest ciągła. - + The mesh '%1' is a solid. Siatka '%1' jest ciągła. - + Solid Mesh Siatka bryły - + Boundings Granice - + Fill holes Wypełnij otwory - + Fill holes with maximum number of edges: Wypełnij otwory maksymalną liczbą krawędzi: - + Scaling Skalowanie - + Enter scaling factor: Wprowadź współczynnik skalowania: @@ -2125,43 +2150,43 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować.[Punktów: %1, Krawędzi: %2, Powierzchni: %3] - + Display components Wyświetl fragmenty - + Display segments Wyświetl segmenty - + Leave info mode Opuść tryb informacyjny - + Index: %1 Indeks :%1 - + Leave hole-filling mode Opuść tryb wypełniania otworu - + Leave removal mode Opuść tryb usuwania - + Delete selected faces Usuń zaznaczone powierzchnie - + Clear selected faces Wyczyść zaznaczone powierzchnie diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm index b1ca9e76ba..55b3f60dad 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index 6e418bf709..f904c689c5 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Malha - + Add triangle Adicionar triângulo - - + + Add triangle manually to a mesh Adicionar triângulo manualmente a uma malha @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Malha - + Boundings info... Info caixa de volume... - - + + Shows the boundings of the selected mesh Mostra a caixa de volume da malha selecionada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Malha - + Regular solid... Sólido regular... - - + + Builds a regular solid Cria um sólido regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Malha - + Cross-sections... Secções transversais... - - + + Cross-sections Secções transversais @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Malha - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Malha - + Difference Diferença @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Malha - + Face info Info face - - + + Information about face Informações sobre a face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Malha - + Check solid mesh Verificar malha sólida - - + + Checks whether the mesh is a solid Verifica se a malha é um sólido @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Malha - + Evaluate and repair mesh... Analisar e consertar malha... - - + + Opens a dialog to analyze and repair a mesh Abre uma janela para analisar e consertar uma malha @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Malha - + Export mesh... Exportar malha... - - + + Exports a mesh to file Exporta uma malha para um arquivo @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Malha - + Close hole Fechar furo - - + + Close holes interactively Fechar furos interativamente @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Malha - + Fill holes... Preencher furos... - - + + Fill holes of the mesh Preencher furos na malha @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Malha - + Flip normals Inverter normais - - + + Flips the normals of the mesh Inverte as normais da malha @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Malha - + Create mesh from geometry... Criar malha a partir de geometria... - - + + Create mesh from the selected geometry Criar uma malha a partir da geometria selecionada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Malha - + Create mesh from shape... Criar malha a partir de uma forma... - + Tessellate shape Paginar forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Malha - + Harmonize normals Harmonizar as normais - - + + Harmonizes the normals of the mesh Harmoniza as normais da malha @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Malha - + Import mesh... Importar malha... - - + + Imports a mesh from file Importa uma malha a partir de um arquivo @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Malha - + Intersection Intersecção @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Malha - + Merge Fundir - + Merges selected meshes into one Fundir as malhas selecionadas numa só @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Malha - + Cut mesh Cortar malha - - + + Cuts a mesh with a picked polygon Corta uma malha com um polígono escolhido @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Malha - + Make segment Fazer um segmento - - + + Creates a mesh segment Criar um segmento de malha @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Malha - + Select mesh Selecione uma malha - - + + Select an area of the mesh Selecione uma área da malha @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Malha - + Split mesh Dividir uma malha - - + + Splits a mesh into two meshes Dividir uma malha em duas @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Malha - + Trim mesh Cortar malha - - + + Trims a mesh with a picked polygon Recorta uma malha com um polígono @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Malha - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Malha - + Remove components by hand... Remover componentes manualmente... - - + + Mark a component to remove it from the mesh Marcar um componente para ser removido da malha @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Malha - + Remove components... Remover componentes... - - + + Remove topologic independent components from the mesh Remover componentes topológicos independentes da malha @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Malha - + Scale... Escala... - + Scale selected meshes Escalar malhas selecionadas @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Malha - + Create section from mesh and plane Criar a seção a partir da malha e plano - - + + Section from mesh and plane Seção a partir da malha e plano @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Malha - + Create mesh segments... Cria segmentos de uma malha... - - + + Create mesh segments Criar segmentos de malha @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Malha - + Create mesh segments from best-fit surfaces... Crie segmentos de malha de superfícies com melhor ajuste... - - + + Create mesh segments from best-fit surfaces Crie segmentos de malha de superfícies com melhor ajuste @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Malha - + Smooth... Suavizar... - - + + Smooth the selected meshes Suavizar as malhas selecionadas @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Malha - + Trim mesh with a plane Aparar malha numa superfície plana - - + + Trims a mesh with a plane Apare uma malha numa superfície plana @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Malha - + Curvature plot Traçado de curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula a curvatura dos vértices de uma malha @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Malha - + Curvature info Info curvatura - - + + Information about curvature Informações sobre a curvatura @@ -742,7 +742,7 @@ Absolute number - Absolute number + Número absoluto @@ -752,7 +752,7 @@ Absolute number (Maximum: %1) - Absolute number (Maximum: %1) + Número absoluto (Máximo: %1) @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exportar arquivos AMF usando compressão - + + Width: + Largura: + + + + Height: + Altura: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Este parâmetro indica se a compressão ZIP @@ -1314,7 +1324,7 @@ is used when writing a file in AMF format A bounding box will be displayed - A bounding box will be displayed + Uma caixa delimitadora será exibida @@ -1474,7 +1484,7 @@ to a smoother appearance. Frontal - Frontal + Frontal @@ -1484,7 +1494,7 @@ to a smoother appearance. Parallelograms - Parallelograms + Paralelogramos @@ -1495,12 +1505,12 @@ to a smoother appearance. Running gmsh... - Running gmsh... + Executando gmsh... Failed to start - Failed to start + Falha ao iniciar @@ -1607,12 +1617,12 @@ to a smoother appearance. Max element size (0.0 = Auto): - Max element size (0.0 = Auto): + Tamanho máximo do elemento (0.0 = Auto): Min element size (0.0 = Auto): - Min element size (0.0 = Auto): + Tamanho mínimo do elemento (0.0 = Auto): @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Limites de %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Ocorreu um erro desconhecido ao executar o OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. O OpenSCAD não foi encontrado em seu sistema. @@ -1975,146 +1985,161 @@ Favor visitar http://www.openscad.org/index.html para instalá-lo. Importação e exportação - + All Mesh Files Todos os arquivos de malha - - + + Binary STL Binário STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Malha binária - - + + Alias Mesh Malha de alias - - + + Object File Format Formato de arquivo objeto - - + + Inventor V2.1 ascii Inventor v 2.1 ascii - - + + Stanford Polygon Polígono de Stanford - - + + All Files Todos os Arquivos - + Import mesh Importar malha - + Simple Model Format Formato de modelo simples - + X3D Extensible 3D X3D Extensivel 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML v 2.0 - + Compressed VRML 2.0 VRML 2.0 comprimido - + Nastran Nastran - + Python module def Def de módulo Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exportar malha - + Meshing Tolerance Tolerância de malhagem - + Enter tolerance for meshing geometry: Digite tolerância para a malhagem de geometria: - + The mesh '%1' is not a solid. A malha '%1' não é um sólido. - + The mesh '%1' is a solid. A malha '%1' é um sólido. - + Solid Mesh Malha sólida - + Boundings Caixa de volume - + Fill holes Preencher furos - + Fill holes with maximum number of edges: Preenche buracos com um número máximo de arestas: - + Scaling Escalar - + Enter scaling factor: Digite o fator de escala: @@ -2124,43 +2149,43 @@ Favor visitar http://www.openscad.org/index.html para instalá-lo. [Pontos: %1, Bordas: %2, Faces: %3] - + Display components Exibir componentes - + Display segments - Display segments + Exibir segmentos - + Leave info mode Sair do modo de info - + Index: %1 Índice: %1 - + Leave hole-filling mode Sair do modo de preenchimento de furos - + Leave removal mode Sair do modo de remoção - + Delete selected faces Excluir as faces selecionadas - + Clear selected faces Limpar as faces selecionadas diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm index 3428b6c5b3..aa9132f33b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts index 19e4ec2c10..c7d8941191 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Malha - + Add triangle Adicionar Triâgulo - - + + Add triangle manually to a mesh Adicionar Manualmente Triângulo p/ uma Malha @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Malha - + Boundings info... Informação de delimitações... - - + + Shows the boundings of the selected mesh Mostra as delimitações da malha selecionada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Malha - + Regular solid... Sólido Regular - - + + Builds a regular solid Cria um Sólido Regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Malha - + Cross-sections... Perfis transversais ... - - + + Cross-sections Perfis transversais @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Malha - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Malha - + Difference Diferença @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Malha - + Face info Informação da Superfície - - + + Information about face Informação Sobre a Superfície @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Malha - + Check solid mesh Verificar Malha Sólida - - + + Checks whether the mesh is a solid Verificar se a malha é ou não um sólido @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Malha - + Evaluate and repair mesh... Avaliar e reparar malha... - - + + Opens a dialog to analyze and repair a mesh Abre uma janela para analisar e reparar a malha @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Malha - + Export mesh... Exportar Malha ... - - + + Exports a mesh to file Exportar Malha para Ficheiro @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Malha - + Close hole Fechar Buraco - - + + Close holes interactively Fechar buracos interativamente @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Malha - + Fill holes... Preencher buracos ... - - + + Fill holes of the mesh Preencher buracos na malha @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Malha - + Flip normals Inverter normais - - + + Flips the normals of the mesh Inverter os normais da malha @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Malha - + Create mesh from geometry... Criar Malha a partir da Geometria - - + + Create mesh from the selected geometry Criar uma malha da geometria selecionada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Malha - + Create mesh from shape... Criar Malha a Partir da Forma ... - + Tessellate shape Forma Tessellate @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Malha - + Harmonize normals Harmonizar normais - - + + Harmonizes the normals of the mesh Harmoniza os normais da malha @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Malha - + Import mesh... Importar Malha ... - - + + Imports a mesh from file Importar uma malha de um ficheiro @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Malha - + Intersection Interseção @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Malha - + Merge Fundir - + Merges selected meshes into one Fundir as malhas selecionadas numa só @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Malha - + Cut mesh Cortar Malha - - + + Cuts a mesh with a picked polygon Corta uma malha com um polígono selecionado @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Malha - + Make segment Criar Segmento - - + + Creates a mesh segment Cria um segmento de malha @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Malha - + Select mesh Selecionar Malha - - + + Select an area of the mesh Selecionar uma Área da Malha @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Malha - + Split mesh Dividir Malha - - + + Splits a mesh into two meshes Divide uma malha em duas @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Malha - + Trim mesh Aparar malha - - + + Trims a mesh with a picked polygon Apara uma malha com um polígono escolhido @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Malha - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Malha - + Remove components by hand... Remover manualmente os componentes ... - - + + Mark a component to remove it from the mesh Marcar um componente para o remover da malha @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Malha - + Remove components... Remover Componentes ... - - + + Remove topologic independent components from the mesh Remover componentes topológicos independentes da malha @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Malha - + Scale... Escala... - + Scale selected meshes Escalar malhas selecionadas @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Malha - + Create section from mesh and plane Criar secção a partir da malha e plano - - + + Section from mesh and plane Secção a partir da malha e plano @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Malha - + Create mesh segments... Criar segmentos de malha... - - + + Create mesh segments Criar segmentos de malha @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Malha - + Create mesh segments from best-fit surfaces... Crie segmentos de malha de superfícies com melhor ajuste... - - + + Create mesh segments from best-fit surfaces Crie segmentos de malha de superfícies com melhor ajuste @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Malha - + Smooth... Suavizar ... - - + + Smooth the selected meshes Suavizar as Malhas Selecionadas @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Malha - + Trim mesh with a plane Aparar malha com um plano - - + + Trims a mesh with a plane Aparar malha com um plano @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Malha - + Curvature plot Tracejado de curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula a curvatura dos vértices da malha @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Malha - + Curvature info Informação de curvatura - - + + Information about curvature Informações sobre a curvatura @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exportar ficheiros AMF usando compressão - + + Width: + Largura: + + + + Height: + Altura: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Limites de %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Ocorreu um erro desconhecido ao executar o OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. O OpenSCAD não foi encontrado no seu sistema. @@ -1975,146 +1985,161 @@ Visite http://www.openscad.org/index.html para instalá-lo. Importar/Exportar - + All Mesh Files Todos os Ficheiros de malha (mesh) - - + + Binary STL Binário STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Malha binária - - + + Alias Mesh Nome alternativo da Malha - - + + Object File Format Formato de ficheiro do objeto - - + + Inventor V2.1 ascii Inventor v 2.1 ascii - - + + Stanford Polygon Polígono de Stanford - - + + All Files Todos os Ficheiros - + Import mesh Importar malha - + Simple Model Format Formato do modelo simples - + X3D Extensible 3D X3D Extensivel 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML v 2.0 - + Compressed VRML 2.0 VRML 2.0 comprimido - + Nastran Nastran - + Python module def Def de módulo Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exportar malha - + Meshing Tolerance Tolerância da malhagem - + Enter tolerance for meshing geometry: Introduzir a tolerância para a geometria da malhagem: - + The mesh '%1' is not a solid. A malha '%1' não é um sólido. - + The mesh '%1' is a solid. A malha '%1' é um sólido. - + Solid Mesh Malha sólida - + Boundings Delimitações - + Fill holes Preencher buracos - + Fill holes with maximum number of edges: Preencher buracos com número máximo de arestas: - + Scaling A escalar - + Enter scaling factor: Digite o fator de escala: @@ -2124,43 +2149,43 @@ Visite http://www.openscad.org/index.html para instalá-lo. [Pontos: %1, Arestas: %2, Faces: %3] - + Display components Exibir componentes - + Display segments Display segments - + Leave info mode Sair do modo de informação - + Index: %1 Índice: %1 - + Leave hole-filling mode Sair do modo de preenchimento de buracos - + Leave removal mode Sair do modo de remoção - + Delete selected faces Apagar as faces selecionadas - + Clear selected faces Limpar faces selecionadas diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm index f787bf5288..6342f58f23 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index 94be15db23..8d6ef11e2d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Adauga triunghi - - + + Add triangle manually to a mesh Adaugă manual un triunghi la plasă (rețeaua de discretizare) @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Detalii margini... - - + + Shows the boundings of the selected mesh Afișează marginile plasei selectate @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Solid comun... - - + + Builds a regular solid Creaza un solid comun @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Sectiune transversala... - - + + Cross-sections Sectiune transversala @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Diferenţa @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Informatii fateta - - + + Information about face Informatii despre fata @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Verifică dacă plasa formează un solid - - + + Checks whether the mesh is a solid Verifică dacă plasa formează un solid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluează şi reparară plasa... - - + + Opens a dialog to analyze and repair a mesh Deschide o casetă de dialog pentru analiza și repararea plasei @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exportă plasa... - - + + Exports a mesh to file Exportă o plasă într-un fișier @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Inchide gaura - - + + Close holes interactively Inchide o gaura in mod interactiv @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Umple gauri... - - + + Fill holes of the mesh Umple găurile unei plase @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inversează normalele - - + + Flips the normals of the mesh Inversează normalele unei plase @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Creează o plasă dintr-o geometrie... - - + + Create mesh from the selected geometry Creează o plasă din geometria selectată @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Creaza retea din forma... - + Tessellate shape Divide forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Armonizeaza normalele - - + + Harmonizes the normals of the mesh Armonizează normalele plasei @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importă plasa... - - + + Imports a mesh from file Importa o plasă dintr-un fișier @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersecţie @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Fuziune - + Merges selected meshes into one Fuzionează plasele selectate într-o singură plasă @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Taie plasa - - + + Cuts a mesh with a picked polygon Taie plasa cu poligonul ales @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Creează segment - - + + Creates a mesh segment Creează un segment de plasă @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Selecteaza reteaua - - + + Select an area of the mesh Selectează o zona dintr-o plasă @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Divide plasa - - + + Splits a mesh into two meshes Imparte o plasă în două plase @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Taie plasa - - + + Trims a mesh with a picked polygon Taie plasa cu un poligon ales @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Sterge componente interactiv... - - + + Mark a component to remove it from the mesh Selectează o componentă pentru a fi ștearsă din plasă @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Elimina componente... - - + + Remove topologic independent components from the mesh Elimină componentele topologic-independente dintr-o plasă @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scară... - + Scale selected meshes Mărește la scară plasele selectate @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Creează o secțiune plecând de la la o plasă şi un plan - - + + Section from mesh and plane Secțiune plecând de la la o plasă şi un plan @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Creează segmente de plasă... - - + + Create mesh segments Creează segmente de plasă @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Creaţi segmente ochiurilor de plasă din cele mai adecvate suprafețe... - - + + Create mesh segments from best-fit surfaces Creaţi segmente ochiurilor de plasă din cele mai adecvate suprafețe @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Netezeste... - - + + Smooth the selected meshes Netezește plasele selectate @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Tăiaţi plasa cu un plan - - + + Trims a mesh with a plane Tăie o plasă cu un plan @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Grafic curbura - - + + Calculates the curvature of the vertices of a mesh Calculează curbura vârfurilor unei plase @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Informatii despre curbura - - + + Information about curvature Informatii despre curbura @@ -1267,7 +1267,17 @@ Rulati mai intai comanda de reparare a pliurilor Export fișiere AMF utilizând compresia - + + Width: + Latime: + + + + Height: + Inaltime: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Acesta parametru indică dacă arhivarea ZIP este utilizată la scrierea fișierului în format AMF @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Límite de %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. A intervenit o eroare necunoscută în timpul rulării OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD nu poate fi găsit pe sistem. @@ -1975,146 +1985,161 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Import/Export - + All Mesh Files Toate fişierele tip plasă - - + + Binary STL Binar STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Ochiurilor de plasă binare - - + + Alias Mesh Alias Plasă/Mesh - - + + Object File Format Format de fişier obiect - - + + Inventor V2.1 ascii Inventatorul V2.1 ascii - - + + Stanford Polygon Stanford poligon - - + + All Files Toate fișierele - + Import mesh Import plasa - + Simple Model Format Formatul Modelului Simplu - + X3D Extensible 3D X3D extensibil 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 Comprimat - + Nastran Nastran - + Python module def Definiţie de modulul Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exporta plasa - + Meshing Tolerance Toleranta plasei - + Enter tolerance for meshing geometry: Introduceţi toleranţa pentru geometria plasei: - + The mesh '%1' is not a solid. Plasa %1 nu este un solid. - + The mesh '%1' is a solid. Plasa %1 este un solid. - + Solid Mesh Plasă solidă - + Boundings Margini - + Fill holes Umple goluri - + Fill holes with maximum number of edges: Umple goluri cu numarul maxim de margini: - + Scaling Scalarea - + Enter scaling factor: Introduce factorul de scalare: @@ -2124,43 +2149,43 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. [Puncte: %1, margini: %2, fațete: %3] - + Display components Afișează componente - + Display segments Display segments - + Leave info mode Parasiti modul informare - + Index: %1 Indice: %1 - + Leave hole-filling mode Parasiti modul de umplere a gaurilor - + Leave removal mode Parasiti modul de stergere - + Delete selected faces Stergeti fetele selectate - + Clear selected faces Curatati fetele selectate diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm index bd6c6ed07b..3f64e70536 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 42563ce214..bf883e19c9 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Сеть - + Add triangle Добавить треугольник - - + + Add triangle manually to a mesh Добавить треугольник в полигональную сетку вручную @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Сеть - + Boundings info... Информация о структуре... - - + + Shows the boundings of the selected mesh Показывает структуру выбранной полигональной сетки @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Сеть - + Regular solid... Правильное геометрическое тело... - - + + Builds a regular solid Построение правильного твердого тела @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Сеть - + Cross-sections... Поперечные сечения... - - + + Cross-sections Поперечные сечения @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Сеть - + Decimation... Децимация (прореживание)... - - - + + + Decimates a mesh Прореживание сетки @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Сеть - + Difference Разность @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Сеть - + Face info Информация о поверхности - - + + Information about face Информация о поверхности @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Сеть - + Check solid mesh Проверить полигональную сетку на твердотельность - - + + Checks whether the mesh is a solid Проверяет, является ли полигональная сетка твердотельным объектом @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Сеть - + Evaluate and repair mesh... Оценить и восстановить полигональную сетку... - - + + Opens a dialog to analyze and repair a mesh Открывает диалог для анализа и ремонта полигональной сетки @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Сеть - + Export mesh... Экспорт полигональной сетки... - - + + Exports a mesh to file Экспорт полигональной сетки в файл @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Сеть - + Close hole Закрыть отверстие - - + + Close holes interactively Закрыть отверстия интерактивно @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Сеть - + Fill holes... Заполнить отверстия ... - - + + Fill holes of the mesh Заполнить дырки полигональной сетки @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Сеть - + Flip normals Развернуть направление нормалей - - + + Flips the normals of the mesh Меняет направление нормалей полигональной сетки на противоположное @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Сеть - + Create mesh from geometry... Создать полигональную сетку по геометрии... - - + + Create mesh from the selected geometry Создание полигональной сетки из выбранной геометрии @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Сеть - + Create mesh from shape... Создать полигональную сетку из фигуры... - + Tessellate shape Мозаика из фигуры @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Сеть - + Harmonize normals Согласовать нормали - - + + Harmonizes the normals of the mesh Согласует нормали полигональной сетки @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Сеть - + Import mesh... Импортировать полигональную сетку... - - + + Imports a mesh from file Импорт полигональной сетки из файла @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Сеть - + Intersection Пересечение @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Сеть - + Merge Объединить - + Merges selected meshes into one Объединить выбранные полигональные сетки в одну @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Сеть - + Cut mesh Обрезать полигональную сетку - - + + Cuts a mesh with a picked polygon Обрезать полигональную сетку выбранным многоугольником @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Сеть - + Make segment Создать сегмент - - + + Creates a mesh segment Создает сегмент полигональной сетки @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Сеть - + Select mesh Выбрать полигональную сетку - - + + Select an area of the mesh Выбрать область полигональной сетки @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Сеть - + Split mesh Разделить полигональную сетку - - + + Splits a mesh into two meshes Разделяет полигональную сетку на две полигональные сетки @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Сеть - + Trim mesh Подрезать полигональную сетку - - + + Trims a mesh with a picked polygon Подрезает полигональную сетку выбранным многоугольником @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Сеть - + Refinement... Улучшение... - - + + Refine existing mesh Улучшить существующую сетку @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Сеть - + Remove components by hand... Удалить компоненты вручную ... - - + + Mark a component to remove it from the mesh Пометить компонент для удаления из полигональной сетки @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Сеть - + Remove components... Удалить компоненты... - - + + Remove topologic independent components from the mesh Удалить топологически-независимые компоненты из полигональной сетки @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Сеть - + Scale... Масштаб... - + Scale selected meshes Масштабирование выбранных полигональных сеток @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Сеть - + Create section from mesh and plane Создать секцию из полигональной сетки и плоскости - - + + Section from mesh and plane Секция из полигональной сетки и плоскости @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Сеть - + Create mesh segments... Создать сегменты полигональной сетки... - - + + Create mesh segments Создать сегменты полигональной сетки @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Сеть - + Create mesh segments from best-fit surfaces... Создать сегменты полигональной сетка из наилучшего соответствия поверхностям... - - + + Create mesh segments from best-fit surfaces Создать сегменты полигональной сетка из наилучшего соответствия поверхностям @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Сеть - + Smooth... Сгладить ... - - + + Smooth the selected meshes Сгладить, выбранные полигональные сетки @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Сеть - + Trim mesh with a plane Подрезать полигональную сетку плоскостью - - + + Trims a mesh with a plane Подрезает полигональную сетку выбранной плоскостью @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Сеть - + Curvature plot График кривизны - - + + Calculates the curvature of the vertices of a mesh Вычисляет кривизну вершин полигональной сетки @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Сеть - + Curvature info Данные о кривизне - - + + Information about curvature Информация о кривизне @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Экспорт AMF файлов со сжатием - + + Width: + Ширина: + + + + Height: + Высота: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Этот параметр указывает на использование ZIP сжатия во время записи в AMF формат @@ -1922,7 +1932,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Привязка %1: @@ -1930,26 +1940,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Произошла неизвестная ошибка при выполнении OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. Приложение OpenSCAD не обнаружено в системе. @@ -1972,146 +1982,161 @@ Please visit http://www.openscad.org/index.html to install it. Импорт/экспорт - + All Mesh Files Все файлы полигональных сеток - - + + Binary STL Двоичный STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Двоичная полигональная сетка - - + + Alias Mesh Псевдоним сетки - - + + Object File Format Формат файла Object - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Все файлы - + Import mesh Импортировать полигональную сетку - + Simple Model Format Простой формат модели - + X3D Extensible 3D X3D Extensible 3D (*. x3d - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Сжатый VRML 2.0 - + Nastran Nastran - + Python module def Python модуль - + + Asymptote Format + Asymptote Format + + + Export mesh Экспортировать полигональную сетку - + Meshing Tolerance Возможное отклонение полигональной сетки - + Enter tolerance for meshing geometry: Введите возможное отклонение создаваемой полигональной сетки для геометрии: - + The mesh '%1' is not a solid. Полигональная сетка '%1' не является твердым телом. - + The mesh '%1' is a solid. Полигональная сетка '%1' является твердым телом. - + Solid Mesh Полигональная сетка объемного тела - + Boundings Ограничения - + Fill holes Заполнить отверстия - + Fill holes with maximum number of edges: Заполнить отверстия максимальным числом ребер: - + Scaling Масштабирование - + Enter scaling factor: Введите коэффициент масштабирования: @@ -2121,43 +2146,43 @@ Please visit http://www.openscad.org/index.html to install it. [Точек: %1, рёбер: %2, граней: %3] - + Display components Показать компоненты - + Display segments Отобразить сегменты - + Leave info mode Выйти из информационного режима - + Index: %1 Индекс: %1 - + Leave hole-filling mode Выйти из режима заполнения отверстий - + Leave removal mode Выйти из режима удаления - + Delete selected faces Удалить выбранные грани - + Clear selected faces Снять выделение выбранных граней diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.qm index 0093ac38a2..6cba792b58 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts index 6658c972c9..dd16314f26 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Pridať trojuholník - - + + Add triangle manually to a mesh Pridať do siete trojuholník ručne @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Info o ohraničeniach... - - + + Shows the boundings of the selected mesh Shows the boundings of the selected mesh @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Regular solid... - - + + Builds a regular solid Builds a regular solid @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Prierezy... - - + + Cross-sections Prierezy @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Rozdiel @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Face info - - + + Information about face Information about face @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Check solid mesh - - + + Checks whether the mesh is a solid Checks whether the mesh is a solid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Opens a dialog to analyze and repair a mesh @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Export mesh... - - + + Exports a mesh to file Exports a mesh to file @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Close hole - - + + Close holes interactively Close holes interactively @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Fill holes... - - + + Fill holes of the mesh Fill holes of the mesh @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Prevráť normály - - + + Flips the normals of the mesh Prevráť normály siete @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Create mesh from geometry... - - + + Create mesh from the selected geometry Create mesh from the selected geometry @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Vytvoriť sieť z tvaru ... - + Tessellate shape Rozkúskovanie tvaru @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Zarovnať normály - - + + Harmonizes the normals of the mesh Zarovnať normály Siete @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Import mesh... - - + + Imports a mesh from file Imports a mesh from file @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Priesečník @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Merge - + Merges selected meshes into one Merges selected meshes into one @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Cut mesh - - + + Cuts a mesh with a picked polygon Cuts a mesh with a picked polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Make segment - - + + Creates a mesh segment Creates a mesh segment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Vyber mesh - - + + Select an area of the mesh Select an area of the mesh @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Split mesh - - + + Splits a mesh into two meshes Splits a mesh into two meshes @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Trim mesh - - + + Trims a mesh with a picked polygon Trims a mesh with a picked polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Remove components by hand... - - + + Mark a component to remove it from the mesh Mark a component to remove it from the mesh @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Odstrániť časť... - - + + Remove topologic independent components from the mesh Remove topologic independent components from the mesh @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Create mesh segments... - - + + Create mesh segments Create mesh segments @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Hladkosť... - - + + Smooth the selected meshes Smooth the selected meshes @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Trim mesh with a plane - - + + Trims a mesh with a plane Trims a mesh with a plane @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Curvature plot - - + + Calculates the curvature of the vertices of a mesh Počíta zakrivenie vrcholov siete @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Zakrivenie-info - - + + Information about curvature Informácie o zakrivení @@ -1267,7 +1267,17 @@ Najprv spustite príkaz na opravu záhybov Export AMF files using compression - + + Width: + šírka: + + + + Height: + Výška: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD cannot be found on your system. @@ -1976,146 +1986,161 @@ Please visit http://www.openscad.org/index.html to install it. Import/Export - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files All Files - + Import mesh Importovať sieť - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Exportovať sieť - + Meshing Tolerance Tolerancia siete - + Enter tolerance for meshing geometry: Enter tolerance for meshing geometry: - + The mesh '%1' is not a solid. The mesh '%1' is not a solid. - + The mesh '%1' is a solid. The mesh '%1' is a solid. - + Solid Mesh Solid Mesh - + Boundings Boundings - + Fill holes Vyplniť diery - + Fill holes with maximum number of edges: Vyplniť diery maximálnym počtom hrán: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2125,43 +2150,43 @@ Please visit http://www.openscad.org/index.html to install it. [Points: %1, Edges: %2, Faces: %3] - + Display components Display components - + Display segments Display segments - + Leave info mode Opustiť režim info - + Index: %1 Index: %1 - + Leave hole-filling mode Opustiť režim vypĺňania dier - + Leave removal mode Opustiť režim odstránenia - + Delete selected faces Odstrániť vybraté tváre - + Clear selected faces Vymazať vybraté tváre diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm index b32f78b473..cbe4fc0dcc 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts index 9a3618472b..2b65199a46 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Dodaj trikotnik - - + + Add triangle manually to a mesh Ročno dodaj trikotnik v ploskovje @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Podatki o mejah … - - + + Shows the boundings of the selected mesh Prikaže meje izbranega ploskovja @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Preprosto telo … - - + + Builds a regular solid Zgradi preprosto telo @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Prečni prerezi … - - + + Cross-sections Prečni prerezi @@ -80,21 +80,21 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... - Decimation... + Decimacija... - - - + + + Decimates a mesh - Decimates a mesh + Decimacija mreže @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Razlika @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Podatki ploskve - - + + Information about face Podatki o ploskvi @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Preveri ploskovje telesa - - + + Checks whether the mesh is a solid Preveri, ali je ploskovje telo @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Ovrednoti in popravi ploskovje... - - + + Opens a dialog to analyze and repair a mesh Odpre pogovorno okno za analizo in popravilo ploskovja @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Izvozi ploskovje … - - + + Exports a mesh to file Izvozi ploskovje v datoteko @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Zapri luknjo - - + + Close holes interactively Zapri luknjo sodejno @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Zapolni luknje … - - + + Fill holes of the mesh Zapolni luknje ploskovja @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Obrni normale - - + + Flips the normals of the mesh Obrne normale ploskovja @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Ustvari ploskovje iz geometrije … - - + + Create mesh from the selected geometry Ustvari ploskovje iz izbrane geometrije @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Ustvari ploskovje iz oblike … - + Tessellate shape Teseliraj obliko @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Uskladi normale - - + + Harmonizes the normals of the mesh Uskladi normale ploskovja @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Uvozi ploskovje … - - + + Imports a mesh from file Uvozi ploskovje iz datoteke @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Sečišče @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Združi - + Merges selected meshes into one Združi izbrana ploskovja v eno @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Reži ploskovje - - + + Cuts a mesh with a picked polygon Reže ploskovje z izbranim mnogokotnikom @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Ustvari odsek - - + + Creates a mesh segment Ustvari mrežni odsek @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Izberite ploskovje - - + + Select an area of the mesh Izberite področje ploskovja @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Razcepi ploskovje - - + + Splits a mesh into two meshes Razcepi ploskovje v dve @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh - Prireži ploskovje + Prireži mrežo - - + + Trims a mesh with a picked polygon Prireže ploskovje z izbranim mnogokotnikom @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Dodelava ... - - + + Refine existing mesh Dodelaj obstoječe ploskovje @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Ročno odstrani sestavine … - - + + Mark a component to remove it from the mesh Označite sestavino, ki jo želite odstraniti iz ploskovja @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Odstrani sestavine … - - + + Remove topologic independent components from the mesh Odstrani zvezno neodvisne sestavine iz ploskovja @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Povečava... - + Scale selected meshes Spremeni velikost izbranega ploskovja @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Ustvari prerez iz ploskovja in ravnine - - + + Section from mesh and plane Prerez iz ploskovja in ravnine @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Ustvari odseke ploskovja … - - + + Create mesh segments Ustvari odseke ploskovja @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Ustvari dele ploskovja iz najbolje prilegajočih se površij... - - + + Create mesh segments from best-fit surfaces Ustvari dele ploskovja iz najbolje prilegajočih se površij @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Zgladi … - - + + Smooth the selected meshes Zgladi izbrana ploskovja @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Prireži ploskovje z ravnino - - + + Trims a mesh with a plane Prireže ploskovje z ravnino @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Izriši ukrivljenost - - + + Calculates the curvature of the vertices of a mesh Izračuna ukrivljenost temen ploskovja @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Podatki ukrivljenosti - - + + Information about curvature Podatki o ukrivljenosti @@ -721,12 +721,12 @@ Decimating - Decimating + Decimiranje Reduction - Reduction + Zmanjšanje @@ -736,13 +736,13 @@ Full - Full + Popolno Absolute number - Absolute number + Absolutno število @@ -752,7 +752,7 @@ Absolute number (Maximum: %1) - Absolute number (Maximum: %1) + Absolutno število (Maksimalno: %1) @@ -1267,7 +1267,17 @@ Najprej zaženite ukaz za odpravljaje pregibov Izvozi dadoteke AMF z uporabo kompresije - + + Width: + Širina: + + + + Height: + Višina: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Ta parameter prikazuje ali je pri zapisovanju datoteke @@ -1480,7 +1490,7 @@ s Phongovim senčenjem doseže gladkejši videz. Frontal Quad - Frontal Quad + Čelni četverokotnik @@ -1926,7 +1936,7 @@ s Phongovim senčenjem doseže gladkejši videz. Mesh_BoundingBox - + Boundings of %1: Meje %1: @@ -1934,26 +1944,26 @@ s Phongovim senčenjem doseže gladkejši videz. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Med izvajanjem OpenSCADa je prišlo do neznane napake. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. V vašem sistemu ni mogoče najti OpenSCADa. @@ -1976,146 +1986,161 @@ Za namestitev obiščite http://www.openscad.org/index.html. Uvozi-Izvozi - + All Mesh Files Vse datoteke ploskovij - - + + Binary STL Dvojiški STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Dvojiško ploskovje - - + + Alias Mesh Vzdevek mreže - - + + Object File Format Zapis datoteke predmeta - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Mnogokotnik Stanford - - + + All Files Vse datoteke - + Import mesh Uvozi ploskovje - + Simple Model Format Oblika preprostega modela - + X3D Extensible 3D X3D razširljiv 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Stisnjen VRML 2.0 - + Nastran Nastran - + Python module def Določilo modula Python - + + Asymptote Format + Asymptote Format + + + Export mesh Izvozi ploskovje - + Meshing Tolerance Dopustna odstopanja ploskovjenja - + Enter tolerance for meshing geometry: Vnesite dopustno odstopanju pri ploskovjenju geometrije: - + The mesh '%1' is not a solid. Ploskovje '%1' ni telo. - + The mesh '%1' is a solid. Ploskovje '%1' je telo. - + Solid Mesh Telesno ploskovje - + Boundings Meje - + Fill holes Zapolni luknje - + Fill holes with maximum number of edges: Zapolni luknje z največjim številom robov: - + Scaling Skaliranje - + Enter scaling factor: Vnesite skalirni faktor: @@ -2125,43 +2150,43 @@ Za namestitev obiščite http://www.openscad.org/index.html. [točk: %1, robov: %2, ploskev: %3] - + Display components Prikaži sestavine - + Display segments Prikaži odseke - + Leave info mode Zapusti podatkovni način - + Index: %1 Kazalo: %1 - + Leave hole-filling mode Zapusti način zapolnjevanja lukenj - + Leave removal mode Zapusti odstranjevalni način - + Delete selected faces Izbriši izbrane ploskve - + Clear selected faces Počisti izbrane ploskve diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm index 0edf55e23d..94f821792d 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts index 809386a9b3..c45b884447 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Додај троугао - - + + Add triangle manually to a mesh Додај троугао ручно мрежи @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Информације о границама... - - + + Shows the boundings of the selected mesh Показује границе одабране мреже @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Регуларно чврcто тело... - - + + Builds a regular solid Креира обично чврcто тело @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Пресеци... - - + + Cross-sections Пресеци @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Разлика @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Информације о површи - - + + Information about face Информације о површи @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Check solid mesh - - + + Checks whether the mesh is a solid Проверава да ли је Мрежа чврcто тело @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Evaluate and repair mesh... - - + + Opens a dialog to analyze and repair a mesh Отвара дијалог да анализира и поправи мрежу @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Извези мрежу... - - + + Exports a mesh to file Извези мрежу у датотеку @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Затвори рупу - - + + Close holes interactively Затвори рупе интерактивно @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Попуни рупе... - - + + Fill holes of the mesh Попуни рупе мреже @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Обрни нормале - - + + Flips the normals of the mesh Обрће нормале мреже @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Направи мрежу од геометрије... - - + + Create mesh from the selected geometry Направи мрежу од изабране геометрије @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Креирање мреже од облика ... - + Tessellate shape Направити мозаик од облика @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Уcклади нормале - - + + Harmonizes the normals of the mesh Уcклађује нормале мреже @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Увези мрежу... - - + + Imports a mesh from file Увози мрежу из датотеке @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Преcек @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Merge - + Merges selected meshes into one Merges selected meshes into one @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Иcеци мрежу - - + + Cuts a mesh with a picked polygon Пресеца мрежу са одабраним многоуглом @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Направи cегмент - - + + Creates a mesh segment Прави cегмент мреже @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Изабери мрежу - - + + Select an area of the mesh Изабери регију мреже @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Подели мрежу - - + + Splits a mesh into two meshes Подели мражу на две мреже @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Обрежи мрежу - - + + Trims a mesh with a picked polygon Обрезује мрежу са одабраним многоуглом @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Ручно уклони компоненте... - - + + Mark a component to remove it from the mesh Обележи компоненту ради уклањања из мреже @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Уклони компоненте... - - + + Remove topologic independent components from the mesh Уклони тополошки независне компоненте из мреже @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Направи cегмент мреже... - - + + Create mesh segments Направи cегмент мреже @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Глатко... - - + + Smooth the selected meshes Углади изабране мреже @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Обрежи мрежу користећи раван - - + + Trims a mesh with a plane Обрезује мрежу користећи раван @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Диаграм закривљености - - + + Calculates the curvature of the vertices of a mesh Израчунава закривљеност темена мреже @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Закривљеност инфо - - + + Information about curvature Информације о закривљености @@ -1267,7 +1267,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + Ширина: + + + + Height: + Висина: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD није могуће пронаћи на вашем cиcтему. @@ -1976,146 +1986,161 @@ Please visit http://www.openscad.org/index.html to install it. Увези-Извези - + All Mesh Files All Mesh Files - - + + Binary STL Binary STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binary Mesh - - + + Alias Mesh Alias Mesh - - + + Object File Format Object File Format - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Све датотеке - + Import mesh Увези мрежу - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Compressed VRML 2.0 - + Nastran Nastran - + Python module def Python module def - + + Asymptote Format + Asymptote Format + + + Export mesh Извези мрежу - + Meshing Tolerance Толеранција мрежења - + Enter tolerance for meshing geometry: Унеси толеранцију за геометрију мрежења: - + The mesh '%1' is not a solid. Мрежа '%1' није чврсто тело. - + The mesh '%1' is a solid. Мрежа '%1' је чврсто тело. - + Solid Mesh Чврcта Мрежа - + Boundings Границе - + Fill holes Попуни рупе - + Fill holes with maximum number of edges: Попуни рупе максималним бројем рубова: - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2125,43 +2150,43 @@ Please visit http://www.openscad.org/index.html to install it. [Тачке: %1, Рубови: %2, Површи: %3] - + Display components Прикажи компоненте - + Display segments Display segments - + Leave info mode Напусти инфо режим - + Index: %1 Индекс: %1 - + Leave hole-filling mode Напусти режим попуњавања рупа - + Leave removal mode Напусти режим за уклањање - + Delete selected faces Избриши одабране површи - + Clear selected faces Очисти изабране површи diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm index 3f05be93fd..b6bc035612 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index a1a131b452..2281aceaa4 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Nät - + Add triangle Addera triangel - - + + Add triangle manually to a mesh Addera triangel manuellt till ett nät @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Nät - + Boundings info... Begränsningsinfo... - - + + Shows the boundings of the selected mesh Visar begränsningarna på det valda nätet @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Nät - + Regular solid... Reguljär solid... - - + + Builds a regular solid Skapar en reguljär solid @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Nät - + Cross-sections... Tvärsnitt... - - + + Cross-sections Tvärsnitt @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Nät - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Nät - + Difference Skillnad @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Nät - + Face info Ytinformation - - + + Information about face Information om yta @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Nät - + Check solid mesh Kontrolera solidnät - - + + Checks whether the mesh is a solid Kontrollerar om nätet är en solid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Nät - + Evaluate and repair mesh... Utvärdera och reparera nät... - - + + Opens a dialog to analyze and repair a mesh Öppnar en dialog för att analysera och reparera ett nät @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Nät - + Export mesh... Exportera nät... - - + + Exports a mesh to file Exporterar ett nät till fil @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Nät - + Close hole Stäng hål - - + + Close holes interactively Stäng hål interaktivt @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Nät - + Fill holes... Fyll hål... - - + + Fill holes of the mesh Fyll nätets hål @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Nät - + Flip normals Invertera normaler - - + + Flips the normals of the mesh Invertera nätets normaler @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Nät - + Create mesh from geometry... Skapa nät från geometri... - - + + Create mesh from the selected geometry Skapa nät från den valda geometrin @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Nät - + Create mesh from shape... Skapa nät från form... - + Tessellate shape Tessellera form @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Nät - + Harmonize normals Anpassa normaler - - + + Harmonizes the normals of the mesh Anpassa nätets normaler @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Nät - + Import mesh... Importera nät... - - + + Imports a mesh from file Importerar ett nät från fil @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Nät - + Intersection Skärning @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Nät - + Merge Förena - + Merges selected meshes into one Förenar de markerade näten till ett nät @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Nät - + Cut mesh Klipp nät - - + + Cuts a mesh with a picked polygon Klipper ett nät med en vald polygon @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Nät - + Make segment Skapa segment - - + + Creates a mesh segment Skapar ett nätsegment @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Nät - + Select mesh Välj nät - - + + Select an area of the mesh Markera ett område i nätet @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Nät - + Split mesh Dela nät - - + + Splits a mesh into two meshes Delar ett nät till två nät @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Nät - + Trim mesh Trimma nät - - + + Trims a mesh with a picked polygon Trimmar ett nät med en vald polygon @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Nät - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Nät - + Remove components by hand... Ta bort komponenter för hand... - - + + Mark a component to remove it from the mesh Markera en komponent för att ta bort den från nätet @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Nät - + Remove components... Ta bort komponenter... - - + + Remove topologic independent components from the mesh Ta bort topologiskt oberoende komponenter från nätet @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Nät - + Scale... Skala... - + Scale selected meshes Skala markerade nät @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Nät - + Create section from mesh and plane Skapa snitt från nät och plan - - + + Section from mesh and plane Snitt från nät och plan @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Nät - + Create mesh segments... Skapa nät segment... - - + + Create mesh segments Skapa nät segment @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Nät - + Create mesh segments from best-fit surfaces... Skapa nätsegment från bästa-passform-ytor... - - + + Create mesh segments from best-fit surfaces Skapa nätsegment från bästa-passform-ytor @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Nät - + Smooth... Jämna ut... - - + + Smooth the selected meshes Jämna ut de valda näten @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Nät - + Trim mesh with a plane Trimma nät med ett plan - - + + Trims a mesh with a plane Trimmar ett nät med ett plan @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Nät - + Curvature plot Krökningsplott - - + + Calculates the curvature of the vertices of a mesh Beräknar hörnens krökning på ett nät @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Nät - + Curvature info Krökningsinfo - - + + Information about curvature Information om krökning @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exportera AMF-filer med komprimering - + + Width: + Bredd: + + + + Height: + Höjd: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Denna parameter anger om ZIP-kompression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Begränsningar för %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Ett okänt fel inträffade under körningen av OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD kunde inte hittas på datorn. @@ -1975,146 +1985,161 @@ Besök http://www.openscad.org/index.html för att installera det. Importera/Exportera - + All Mesh Files Alla Mesh-filer - - + + Binary STL Binär STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Binärt Mesh - - + + Alias Mesh Alias nät - - + + Object File Format Object Filformat - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford-polygon - - + + All Files Alla Filer - + Import mesh Importera nät - + Simple Model Format Enkelt modellformat - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Komprimerad VRML 2.0 - + Nastran Nastran - + Python module def Python-modul def - + + Asymptote Format + Asymptote Format + + + Export mesh Exportera nät - + Meshing Tolerance Nät tolerans - + Enter tolerance for meshing geometry: Mata in tolerans för nätning av geometri: - + The mesh '%1' is not a solid. Nätet '%1' är ingen solid. - + The mesh '%1' is a solid. Nätet '%1' är en solid. - + Solid Mesh Solid nät - + Boundings Gränser - + Fill holes Fyll hål - + Fill holes with maximum number of edges: Fyll hål med maximalt antal kanter: - + Scaling Skalning - + Enter scaling factor: Ange skalfaktor: @@ -2124,43 +2149,43 @@ Besök http://www.openscad.org/index.html för att installera det. [Punkter: %1, Kanter: %2, Ytor: %3] - + Display components Visa komponenter - + Display segments Display segments - + Leave info mode Lämna info läge - + Index: %1 Index: %1 - + Leave hole-filling mode Lämna hålfyllningsläge - + Leave removal mode Lämna borttagningsläge - + Delete selected faces Ta bort markerade ytor - + Clear selected faces Rensa valda ytor diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm index 8ea3d57658..04c03114aa 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts index 0c1322a6cb..ed22c88207 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Üçgen Ekle - - + + Add triangle manually to a mesh bir kafese elle Üçgen Ekle @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Sınır bilgileri... - - + + Shows the boundings of the selected mesh Seçilen kafesin sınırlarını gösterir @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Normal katı... - - + + Builds a regular solid Düzenli bir solid oluşturur @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Kesitler... - - + + Cross-sections Kesit @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Fark @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Yüz bilgisi - - + + Information about face Yüz hakkında bilgi @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Katı kafesi kontrol edin - - + + Checks whether the mesh is a solid Örgünün katı olup olmadığını kontrol eder @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Değerlendir ve kafesi onar... - - + + Opens a dialog to analyze and repair a mesh Çözümlemek ve bir kafes onarmak için bir iletişim kutusu açar @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Kafesi Dışa Aktar... - - + + Exports a mesh to file Bir Kafes yapıyı, dosyaya (dışa) aktarır @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Deliği kapat - - + + Close holes interactively Etkileşimli olarak delikleri doldur @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Delikleri doldur... - - + + Fill holes of the mesh Ağdaki delikleri doldur @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Normale Çevir - - + + Flips the normals of the mesh Kafes Olarak Normale Çevir @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Geometriden Kafes Oluştur... - - + + Create mesh from the selected geometry Seçilen geometriden kafes oluştur @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Parçacıktan şekil oluştur - + Tessellate shape Şekili mozaik döşe @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Normları uyumlu hale getirin - - + + Harmonizes the normals of the mesh Kafes Normlarına uyumlu hale getirin @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Kafesi içeri aktar... - - + + Imports a mesh from file Dosyadan bir kafes içeri aktarır @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Kesişim @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Birleştir - + Merges selected meshes into one Seçilen eklemeleri bir kafeste topla @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Kafesi kes - - + + Cuts a mesh with a picked polygon Kafesi seçilen bir çokgen ile kes @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Parça oluştur - - + + Creates a mesh segment Kafes parçası oluştur @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Kafes seç - - + + Select an area of the mesh Kafeste bir alan seç @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Kafesi ayır - - + + Splits a mesh into two meshes Kafesi ikiye ayır @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Kafesi kırp - - + + Trims a mesh with a picked polygon Alınan çokgenli bir örgü parçala @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Parçaları elle çıkarın... - - + + Mark a component to remove it from the mesh Örgü parçasını çıkarmak için bir bileşene işaretlemm @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Bileşeni kaldır... - - + + Remove topologic independent components from the mesh Kafesten bağımsız bileşenleri çıkarın @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Ölçeklendir... - + Scale selected meshes Seçilen kafesleri ölçeklendir @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Örgü ve düzlemden kesit oluştur - - + + Section from mesh and plane Örgü ve düzlemden kesit @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Kafes bölümleri oluştur... - - + + Create mesh segments Kafes bölümleri oluştur @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... En uygun yüzeylerden kafes kesimleri oluşturun... - - + + Create mesh segments from best-fit surfaces En uygun yüzeylerden kafes kesimleri oluşturun @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Pürüzsüz... - - + + Smooth the selected meshes Seçili örgüler pürüzsüz @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Bir düzlem ile örgü bölme - - + + Trims a mesh with a plane Bir düzlemle örgü kesme @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Eğrilik şekli - - + + Calculates the curvature of the vertices of a mesh Örgü köşelerinin eğriliğini hesaplar @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Eğrilik bilgisi - - + + Information about curvature Eğrilik hakkında bilgi @@ -1019,7 +1019,7 @@ Please run the command to repair folds first No duplicated points - Yinelenen puan yok + Yinelenen nokta yok @@ -1267,7 +1267,17 @@ Please run the command to repair folds first Sıkıştırmayı kullanarak AMF dosyalarını dışa aktarma - + + Width: + Genişlik: + + + + Height: + Yükseklik: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Bu parametre, AMF formatında bir dosya yazarken ZIP sıkıştırmasının kullanılıp kullanılmayacağını gösterir @@ -1324,7 +1334,7 @@ is used when writing a file in AMF format Default line color for new meshes - Default line color for new meshes + Yeni şekiller için varsayılan çizgi rengi @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: % 1'in limiti: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. OpenSCAD çalıştırılırken bilinmeyen hata oluştu. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD sisteminizde bulunamadı. @@ -1975,192 +1985,207 @@ Yüklemek için lütfen http://www.openscad.org/index.html adresini ziyaret edin İçe-Dışa Aktar - + All Mesh Files Tüm Örgü Dosyaları - - + + Binary STL İkili STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh İkili Örgü - - + + Alias Mesh Alias Örgü - - + + Object File Format Nesne Dosyası Biçimi - - + + Inventor V2.1 ascii Ascii V2.1 mucidi - - + + Stanford Polygon Stanford Poligonu - - + + All Files Tüm Dosyalar - + Import mesh Kafesi içe aktar - + Simple Model Format Basit Model biçimi - + X3D Extensible 3D X3D Genişletilebilir 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Sıkıştırılmış VRML 2.0 - + Nastran Nastran - + Python module def Python def modülü - + + Asymptote Format + Asymptote Format + + + Export mesh Kafesi Dışa Aktar - + Meshing Tolerance Örgü Toleransı - + Enter tolerance for meshing geometry: Örgü geometrisi için toleransı girin: - + The mesh '%1' is not a solid. Örgü '%1' sağlam değil. - + The mesh '%1' is a solid. Örüü '%1' sağlam bir yapıdadır. - + Solid Mesh Katı örgü - + Boundings Sınırlayıcılar - + Fill holes Doldurma delikleri - + Fill holes with maximum number of edges: Delikleri maksimum sayıda kenarla doldurun: - + Scaling Ölçekleme - + Enter scaling factor: Ölçeklendirme faktörünü girin: [Points: %1, Edges: %2, Faces: %3] - [Puanlar:%1, Kenarlar:%, Yüzler:%3] + [Noktalar: %1, Kenarlar: %2, Yüzler: %3] - + Display components Ekran bileşenleri - + Display segments Display segments - + Leave info mode Bilgi modundan çık - + Index: %1 Dizin: %1 - + Leave hole-filling mode Delik dolumu modundan çık - + Leave removal mode Yaprak kaldırma modu - + Delete selected faces Seçilen yüzleri sil - + Clear selected faces Seçili yüzleri temizle diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm index 40d06dd063..e989136ea5 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts index a4e33df415..1a33eec936 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Сітка(Меш) - + Add triangle Додати трикутник - - + + Add triangle manually to a mesh Вручну додати трикутник до сітки @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Сітка(Меш) - + Boundings info... Інформація про обмеження... - - + + Shows the boundings of the selected mesh Показує структуру вибраної мережі @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Сітка(Меш) - + Regular solid... Правильне суцільне тіло... - - + + Builds a regular solid Створює правильне суцільне тіло @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Сітка(Меш) - + Cross-sections... Поперечні перерізи... - - + + Cross-sections Поперечні перерізи @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Сітка(Меш) - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Сітка(Меш) - + Difference Різниця @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Сітка(Меш) - + Face info Інформація про грань - - + + Information about face Інформація про грань @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Сітка(Меш) - + Check solid mesh Перевірити суцільність сітки - - + + Checks whether the mesh is a solid Перевірити чи сітка суцільна @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Сітка(Меш) - + Evaluate and repair mesh... Оцінити і відновити полигональную сітку... - - + + Opens a dialog to analyze and repair a mesh Відкриває діалог для аналізу та ремонту сітки @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Сітка(Меш) - + Export mesh... Експорт сітки... - - + + Exports a mesh to file Експорт сітки до файлу @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Сітка(Меш) - + Close hole Закрити отвір - - + + Close holes interactively Закрити отвори в діалоговому режимі @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Сітка(Меш) - + Fill holes... Заповнити отвори... - - + + Fill holes of the mesh Заповнити отвори сітки @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Сітка(Меш) - + Flip normals Змінити напрямок нормалей на протилежний - - + + Flips the normals of the mesh Змінити напрямок нормалей сітки на протилежний @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Сітка(Меш) - + Create mesh from geometry... Створити сітку з геометрії ... - - + + Create mesh from the selected geometry Створити сітку з обраної геометрії @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Сітка(Меш) - + Create mesh from shape... Створення сітки з форми ... - + Tessellate shape Теселяція форми @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Сітка(Меш) - + Harmonize normals Узгодити нормалі - - + + Harmonizes the normals of the mesh Узгодити нормалі сітки @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Сітка(Меш) - + Import mesh... Імпорт сітки... - - + + Imports a mesh from file Імпорт сітки з файлу @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Сітка(Меш) - + Intersection Перетин @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Сітка(Меш) - + Merge Об'єднання - + Merges selected meshes into one Об'єднати вибрані полігональні сітки в одну @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Сітка(Меш) - + Cut mesh Вирізати сітку - - + + Cuts a mesh with a picked polygon Вирізати сітку з обраного багатокутника @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Сітка(Меш) - + Make segment Зробити сегмент - - + + Creates a mesh segment Створити сегмент сітки @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Сітка(Меш) - + Select mesh Вибір сітки - - + + Select an area of the mesh Вибрати область сітки @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Сітка(Меш) - + Split mesh Розбити сітку - - + + Splits a mesh into two meshes Розділити сітку на дві сітки @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Сітка(Меш) - + Trim mesh Обрізати сітку - - + + Trims a mesh with a picked polygon Обрізати сітку обраним багатокутником @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Сітка(Меш) - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Сітка(Меш) - + Remove components by hand... Видалити компоненти вручну... - - + + Mark a component to remove it from the mesh Позначити компонент для видалення його із сітки @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Сітка(Меш) - + Remove components... Видалити компоненти... - - + + Remove topologic independent components from the mesh Видалити топологічно-незалежні компоненти з сітки @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Сітка(Меш) - + Scale... Масштаб... - + Scale selected meshes Масштабування вибраних полігональних сіток @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Сітка(Меш) - + Create section from mesh and plane Створити секцію з полігональної сітки і площини - - + + Section from mesh and plane Секція з полігональної сітки і площини @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Сітка(Меш) - + Create mesh segments... Створити сегменти сітки... - - + + Create mesh segments Створити сегменти сітки @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Сітка(Меш) - + Create mesh segments from best-fit surfaces... Створити сегменти полігональної сітка з найкращої відповідності поверхонь... - - + + Create mesh segments from best-fit surfaces Створити сегменти полігональної сітка з найкращої відповідності поверхонь @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Сітка(Меш) - + Smooth... Згладжувати... - - + + Smooth the selected meshes Згладжувати вибрані сітки @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Сітка(Меш) - + Trim mesh with a plane Обрізати сітки площиною - - + + Trims a mesh with a plane Обрізати сітку площиною @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Сітка(Меш) - + Curvature plot Ділянка викривлення - - + + Calculates the curvature of the vertices of a mesh Розрахунок викривлення для вершин сітка @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Сітка(Меш) - + Curvature info Інформація викривлення - - + + Information about curvature Інформація про викривлення @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Експорт AMF файлів із стисненням - + + Width: + Ширина: + + + + Height: + Висота: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Цей параметр вказує чи використовується ZIP стиснення @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Прив'язка %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Виникла невідома помилка при виконанні OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. OpenSCAD не знайдений на вашій системі. Будь ласка, відвідайте http://www.openscad.org/index.html щоб встановити цю програму. @@ -1974,146 +1984,161 @@ Please visit http://www.openscad.org/index.html to install it. Імпорт-експорт - + All Mesh Files Всі файли полігональних сіток - - + + Binary STL Двійковий STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh Двійкова полигональная сітка - - + + Alias Mesh Ім'я користувача сітки - - + + Object File Format Формат файлу Object - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Всі файли - + Import mesh Імпорт сітки - + Simple Model Format Простий формат моделі - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 Стиснутий VRML 2.0 - + Nastran Nastran - + Python module def Python модуль - + + Asymptote Format + Asymptote Format + + + Export mesh Експорт сітки - + Meshing Tolerance Відхилення сітки - + Enter tolerance for meshing geometry: Введіть відхилення для геометрії сітки: - + The mesh '%1' is not a solid. Сітка '%1' не суцільна. - + The mesh '%1' is a solid. Сітка '%1' є суцільною. - + Solid Mesh Суцільна сітка - + Boundings Прив'язки - + Fill holes Заповнити отвори - + Fill holes with maximum number of edges: Заповнити отвори з максимальною кількістю ребер: - + Scaling Масштабування - + Enter scaling factor: Введіть коефіцієнт масштабування: @@ -2123,43 +2148,43 @@ Please visit http://www.openscad.org/index.html to install it. [Точок: %1, Ребер: %2, Граней: %3] - + Display components Відобразити компоненти - + Display segments Display segments - + Leave info mode Вийти з інформаційного режиму - + Index: %1 Індекс: %1 - + Leave hole-filling mode Вийти з режиму заповнення отворів - + Leave removal mode Вийти з режиму видалення - + Delete selected faces Знищити обрані грані - + Clear selected faces Очистити обрані грані diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm index 1820f081a7..649732547c 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts index 3c6bdb301d..3fc9b00b82 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Afig un triangle - - + + Add triangle manually to a mesh Afig un triangle manualment a malla @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Informació de límits... - - + + Shows the boundings of the selected mesh Mostra els límits de la malla seleccionada @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Sòlid regular... - - + + Builds a regular solid Construeix un sòlid regular @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Seccions... - - + + Cross-sections Seccions @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Diferència @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Informació de la cara - - + + Information about face Informació sobre la cara @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Comprova el sòlid malla - - + + Checks whether the mesh is a solid Comprova si la malla és un sòlid @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Avalua i repara la malla... - - + + Opens a dialog to analyze and repair a mesh Obri un diàleg per a analitzar i reparar una malla @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Exporta la malla... - - + + Exports a mesh to file Exporta una malla a un fitxer @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Tanca el forat - - + + Close holes interactively Tanca forats interactivament @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Ompli els forats... - - + + Fill holes of the mesh Ompli els forats de la malla @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Inverteix les normals - - + + Flips the normals of the mesh Inverteix les normals de la malla @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Crea una malla a partir de la geometria... - - + + Create mesh from the selected geometry Crea una malla a partir de la geometria seleccionada @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Crea una malla a partir d'una forma... - + Tessellate shape Tesel·la la forma @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Harmonitza les normals - - + + Harmonizes the normals of the mesh Harmonitza les normals de la malla @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Importa la malla... - - + + Imports a mesh from file Importa una malla des d'un fitxer @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Intersecció @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Fusiona - + Merges selected meshes into one Fusiona les malles seleccionades en una @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Retalla la malla - - + + Cuts a mesh with a picked polygon Retalla una malla amb un polígon seleccionat @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Fes un segment - - + + Creates a mesh segment Crea un segment de malla @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Selecciona una malla - - + + Select an area of the mesh Selecciona una àrea de la malla @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Divideix la malla - - + + Splits a mesh into two meshes Divideix una malla en dues malles @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Retalla la malla - - + + Trims a mesh with a picked polygon Retalla una malla amb un polígon seleccionat @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Millora... - - + + Refine existing mesh Millora la malla existent @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Elimina components manualment... - - + + Mark a component to remove it from the mesh Marca un component per a eliminar-lo de la malla @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Elimina components... - - + + Remove topologic independent components from the mesh Suprimeix els components topològics independents de la malla @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Redimensiona... - + Scale selected meshes Redimensiona les malles seleccionades @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Crea una secció a partir d'una malla i un pla - - + + Section from mesh and plane Secció a partir d'una malla i un pla @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Crea segments de malla... - - + + Create mesh segments Crea segments de malla @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Crea segments de malla a partir de les superfícies que s'ajusten millor... - - + + Create mesh segments from best-fit surfaces Crea segments de malla a partir de les superfícies que s'ajusten millor @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Suavitza... - - + + Smooth the selected meshes Suavitza les malles seleccionades @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Retalla la malla amb un pla - - + + Trims a mesh with a plane Retalla una malla amb un pla @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Gràfic de curvatura - - + + Calculates the curvature of the vertices of a mesh Calcula la curvatura dels vèrtexs d'una malla @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Info de la curvatura - - + + Information about curvature Informació de la curvatura @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Exporta fitxers AMF utilitzant la compressió - + + Width: + Amplària: + + + + Height: + Alçària: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format Aquest paràmetre indica si la compressió ZIP s'utilitza en escriure un fitxer en format AMF @@ -1918,7 +1928,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh_BoundingBox - + Boundings of %1: Límits de %1: @@ -1926,26 +1936,26 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. S'ha produït un error mentre s'executava l'OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. L'OpenSCAD no s'ha pogut trobar al vostre sistema. Visiteu http://www.openscad.org/index.html per a instal·lar-lo. @@ -1967,146 +1977,161 @@ Please visit http://www.openscad.org/index.html to install it. Importació-exportació - + All Mesh Files Tots els fitxers de malla - - + + Binary STL STL binari - - - + + + ASCII STL STL ASCII - - + + Binary Mesh Malla en binari - - + + Alias Mesh Malla d'àlies - - + + Object File Format Format del fitxer d'objecte - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Polígon Stanford - - + + All Files Tots els fitxers - + Import mesh Importa la malla - + Simple Model Format Format de model senzill - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 comprimit - + Nastran Nastran - + Python module def Mòdul def de Python - + + Asymptote Format + Asymptote Format + + + Export mesh Exporta la malla - + Meshing Tolerance Tolerància de mallat - + Enter tolerance for meshing geometry: Introdueix la tolerància per a la goemetria de mallat: - + The mesh '%1' is not a solid. La malla '%1' no és un sòlid. - + The mesh '%1' is a solid. La malla '%1' és un sòlid. - + Solid Mesh Malla sòlida - + Boundings Límits envoltants - + Fill holes Ompli els forats - + Fill holes with maximum number of edges: Ompli els forats amb un nombre màxim de vores: - + Scaling Escalat - + Enter scaling factor: Introduïu el factor d'escala: @@ -2116,43 +2141,43 @@ Please visit http://www.openscad.org/index.html to install it. [Punts: %1, Arestes: %2, Cares: %3] - + Display components Mostra els components - + Display segments Mostra els segments - + Leave info mode Ix del mode info - + Index: %1 Índex: %1 - + Leave hole-filling mode Ix del mode d'emplenament de forats - + Leave removal mode Ix del mode de supressió - + Delete selected faces Elimina les cares seleccionades - + Clear selected faces Esborra les cares seleccionades diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.qm index b08ade24c0..96451deb9d 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts index 9f29764146..9b2cbd1847 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle Thêm hình tam giác - - + + Add triangle manually to a mesh Thêm hình tam giác thành lưới bằng cách thủ công @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... Thông tin giới hạn... - - + + Shows the boundings of the selected mesh Hiển thị các đường bao của lưới được chọn @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... Chất rắn thông thường... - - + + Builds a regular solid Xây dựng một chất rắn thông thường @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... Mặt cắt ngang... - - + + Cross-sections Mặt cắt ngang @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference Sự khác nhau @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info Thông tin bề mặt - - + + Information about face Thông tin về bề mặt @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh Kiểm tra lưới chất rắn - - + + Checks whether the mesh is a solid Kiểm tra xem lưới có phải là một vật thể chất rắn hay không @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... Đánh giá và sửa chữa lưới... - - + + Opens a dialog to analyze and repair a mesh Mở hộp thoại để phân tích và sửa chữa lưới @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... Xuất lưới... - - + + Exports a mesh to file Xuất lưới vào tệp @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole Đóng lỗ - - + + Close holes interactively Đóng lỗ tương tác @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... Lấp đầy lỗ... - - + + Fill holes of the mesh Lấp đầy các lỗ của lưới @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals Đảo ngược các tiêu chuẩn - - + + Flips the normals of the mesh Đảo ngược các tiêu chuẩn của lưới @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... Tạo lưới từ hình học... - - + + Create mesh from the selected geometry Tạo lưới từ hình đã chọn @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... Tạo lưới từ hình dạng... - + Tessellate shape Hình dạng lát gạch @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals Hài hòa các tiêu chuẩn - - + + Harmonizes the normals of the mesh Hài hòa các tiêu chuẩn của lưới @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... Nhập lưới... - - + + Imports a mesh from file Nhập lưới vào tệp @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection Điểm giao nhau @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge Hợp nhất - + Merges selected meshes into one Hợp nhất các lưới lại thành một @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh Cắt lưới - - + + Cuts a mesh with a picked polygon Cắt lưới với một đa giác đã chọn @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment Tạo phân đoạn - - + + Creates a mesh segment Tạo một phân đoạn lưới @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh Tạo lưới - - + + Select an area of the mesh Chọn một khu vực của lưới @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh Chia lưới - - + + Splits a mesh into two meshes Chia một lưới ra thành hai lưới @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh Cắt bớt lưới - - + + Trims a mesh with a picked polygon Cắt bớt lưới với một đa giác đã chọn @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... Refinement... - - + + Refine existing mesh Refine existing mesh @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... Gỡ bỏ các bộ phận bằng tay... - - + + Mark a component to remove it from the mesh Đánh dấu một bộ phận để gỡ bỏ nó ra khỏi lưới @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... Gỡ bỏ các bộ phận... - - + + Remove topologic independent components from the mesh Loại bỏ các bộ phận độc lập topo ra khỏi lưới @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Chia tỷ lệ... - + Scale selected meshes Chia tỷ lệ các lưới đã chọn @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Tạo mặt cắt từ lưới và mặt phẳng - - + + Section from mesh and plane Mặt cắt từ lưới và mặt phẳng @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... Tạo phân đoạn lưới... - - + + Create mesh segments Tạo phân đoạn lưới @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... Làm mịn... - - + + Smooth the selected meshes Làm mịn các mắt lưới đã chọn @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane Cắt bớt lưới với một mặt phẳng - - + + Trims a mesh with a plane Cắt bớt lưới với một mặt phẳng @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot Vẽ đường cong - - + + Calculates the curvature of the vertices of a mesh Tính độ cong các đỉnh của lưới @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info Thông tin đường cong - - + + Information about curvature Thông tin về đường cong @@ -1267,7 +1267,17 @@ Hãy chọn lệnh để sửa các nếp uốn trước Xuất các tệp AMF bằng cách nén - + + Width: + Bề rộng: + + + + Height: + Chiều cao: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1926,7 +1936,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1934,26 +1944,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Đã xảy ra lỗi không xác định khi chạy OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. Không thể tìm thấy OpenSCAD trên hệ thống của bạn. @@ -1976,146 +1986,161 @@ Vui lòng truy cập http://www.openscad.org/index.html để cài đặt.Nhập-Xuất - + All Mesh Files Tất cả các tệp lưới - - + + Binary STL STL nhị phân - - - + + + ASCII STL STL ASCII - - + + Binary Mesh Lưới nhị phân - - + + Alias Mesh Lưới Alias - - + + Object File Format Định dạng tệp đối tượng - - + + Inventor V2.1 ascii Nhà phát minh V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files Tất cả các tệp - + Import mesh Nhập lưới - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Có thể mở rộng 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 VRML 2.0 đã nén - + Nastran Nastran - + Python module def Định nghĩa mô đun Python - + + Asymptote Format + Asymptote Format + + + Export mesh Xuất lưới - + Meshing Tolerance Dung sai của lưới - + Enter tolerance for meshing geometry: Nhập dung sai cho hình dạng chia lưới: - + The mesh '%1' is not a solid. Lưới '%1' là một chất rắn. - + The mesh '%1' is a solid. Lưới '%1' là một chất rắn. - + Solid Mesh Lưới chất rắn - + Boundings Giới hạn - + Fill holes Lấp đầy các lỗ - + Fill holes with maximum number of edges: Lấp đầy các lỗ với số cạnh tối đa: - + Scaling Chia tỷ lệ - + Enter scaling factor: Nhập hệ số tỷ lệ: @@ -2125,43 +2150,43 @@ Vui lòng truy cập http://www.openscad.org/index.html để cài đặt.[Điểm: %1, Cạnh: %2, Mặt: %3] - + Display components Hiển thị các bộ phận - + Display segments Display segments - + Leave info mode Rời khỏi chế độ thông tin - + Index: %1 Chỉ mục: %1 - + Leave hole-filling mode Rời khỏi chế độ lấp đầy lỗ - + Leave removal mode Rời khỏi chế độ gỡ bỏ - + Delete selected faces Xóa các mặt đã chọn - + Clear selected faces Xóa các mặt đã chọn diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm index 87c1fd08f0..5c183e27a4 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts index 1c1adf5135..674d85ac3e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh 网格 - + Add triangle 增加三角形 - - + + Add triangle manually to a mesh 手动给网格添加三角形 @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh 网格 - + Boundings info... 边界信息... - - + + Shows the boundings of the selected mesh 显示所选网格的边界 @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh 网格 - + Regular solid... 正多面体实体... - - + + Builds a regular solid 建立正多面体实体 @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh 网格 - + Cross-sections... 横截面... - - + + Cross-sections 横截面 @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh 网格 - + Decimation... Decimation... - - - + + + Decimates a mesh Decimates a mesh @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh 网格 - + Difference 差集 @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh 网格 - + Face info 表面信息 - - + + Information about face 表面信息 @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh 网格 - + Check solid mesh 检查实体网格 - - + + Checks whether the mesh is a solid 检查网格是否为实体 @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh 网格 - + Evaluate and repair mesh... 评估和修复网格... - - + + Opens a dialog to analyze and repair a mesh 打开一个对话框,分析并修复网格 @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh 网格 - + Export mesh... 导出网格... - - + + Exports a mesh to file 导出网格到文件 @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh 网格 - + Close hole 封闭孔 - - + + Close holes interactively 交互式封闭孔 @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh 网格 - + Fill holes... 填充孔... - - + + Fill holes of the mesh 填充网格孔 @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh 网格 - + Flip normals 翻转法线 - - + + Flips the normals of the mesh 翻转网格法线 @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh 网格 - + Create mesh from geometry... 从几何体创建网格... - - + + Create mesh from the selected geometry 从选定的几何体创建网格 @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh 网格 - + Create mesh from shape... 从形体创建网格... - + Tessellate shape 细分形状 @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh 网格 - + Harmonize normals 统一法线 - - + + Harmonizes the normals of the mesh 平滑网格法线 @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh 网格 - + Import mesh... 导入网格... - - + + Imports a mesh from file 从文件中导入网格 @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh 网格 - + Intersection 交集 @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh 网格 - + Merge 合并 - + Merges selected meshes into one 将所选网格合而为一 @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh 网格 - + Cut mesh 切割网格 - - + + Cuts a mesh with a picked polygon 使用多边形切割网格 @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh 网格 - + Make segment 创建片段 - - + + Creates a mesh segment 创建网格 @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh 网格 - + Select mesh 选择网格 - - + + Select an area of the mesh 选择网格的一个区域 @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh 网格 - + Split mesh 拆分网格 - - + + Splits a mesh into two meshes 拆分成两个网格 @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh 网格 - + Trim mesh 修剪网格 - - + + Trims a mesh with a picked polygon 使用选定多边形修建网格 @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh 网格 - + Refinement... 精制... - - + + Refine existing mesh 优化现有网格 @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh 网格 - + Remove components by hand... 手动删除组件... - - + + Mark a component to remove it from the mesh 标记要从网格中删除组件 @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh 网格 - + Remove components... 删除组件... - - + + Remove topologic independent components from the mesh 从网格中删除拓扑独立部件 @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh 网格 - + Scale... 缩放... - + Scale selected meshes 缩放所选网格 @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh 网格 - + Create section from mesh and plane 从网格和平面创建剖面 - - + + Section from mesh and plane 从网格和平面的剖面 @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh 网格 - + Create mesh segments... 建立网格分割... - - + + Create mesh segments 建立网格分割 @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh 网格 - + Create mesh segments from best-fit surfaces... 从最适合的表面创建网格分割... - - + + Create mesh segments from best-fit surfaces 从最适合的表面创建网格分割 @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh 网格 - + Smooth... 平滑... - - + + Smooth the selected meshes 平滑选定的网格 @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh 网格 - + Trim mesh with a plane 以平面修剪网格 - - + + Trims a mesh with a plane 以平面修剪网格 @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh 网格 - + Curvature plot 曲率图 - - + + Calculates the curvature of the vertices of a mesh 计算网格顶点的曲率 @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh 网格 - + Curvature info 曲率信息 - - + + Information about curvature 曲率信息 @@ -1267,7 +1267,17 @@ Please run the command to repair folds first 导出压缩的 AMF 文件 - + + Width: + 宽度: + + + + Height: + 高度: + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format 此参数指示采用 AMF 格式写文件时，是否使用 ZIP 压缩 @@ -1924,7 +1934,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: %1的边界: @@ -1932,26 +1942,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. 运行 OpenSCAD 时发生未知错误。 - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. 在您的系统上未发现 OpenSCAD @@ -1974,146 +1984,161 @@ Please visit http://www.openscad.org/index.html to install it. 导入/导出 - + All Mesh Files 所有网格文档 - - + + Binary STL 二进制 STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh 二进制的网格 - - + + Alias Mesh Alias 网格 - - + + Object File Format 对象文件格式 - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon 斯坦福多边形 - - + + All Files 所有文件 - + Import mesh 导入网格 - + Simple Model Format 简单模型格式 - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 压缩的 VRML 2.0 - + Nastran Nastran - + Python module def Python 模块设定 - + + Asymptote Format + Asymptote Format + + + Export mesh 导出网格 - + Meshing Tolerance 网格化公差 - + Enter tolerance for meshing geometry: 输入网格化几何体公差: - + The mesh '%1' is not a solid. 网格 '%1' 不是实体. - + The mesh '%1' is a solid. 网格 '%1' 是实体. - + Solid Mesh 实体网格 - + Boundings 边界 - + Fill holes 填充孔 - + Fill holes with maximum number of edges: 使用最大边数填充孔: - + Scaling 缩放 - + Enter scaling factor: 输入缩放系数： @@ -2123,43 +2148,43 @@ Please visit http://www.openscad.org/index.html to install it. [点： %1，边线： %2，面： %3] - + Display components 显示组件 - + Display segments 显示段 - + Leave info mode 退出查询模式 - + Index: %1 索引： %1 - + Leave hole-filling mode 退出孔填充模式 - + Leave removal mode 退出删除模式 - + Delete selected faces 删除选定的面 - + Clear selected faces 清除选中的面 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm index cc2519c4ab..e914f20156 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 51a967ea8c..f2b180207d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -4,18 +4,18 @@ CmdMeshAddFacet - + Mesh Mesh - + Add triangle 加入三角形 - - + + Add triangle manually to a mesh 手動於網格中加入三角形 @@ -23,18 +23,18 @@ CmdMeshBoundingBox - + Mesh Mesh - + Boundings info... 範圍資訊... - - + + Shows the boundings of the selected mesh 顯示所選網格範圍 @@ -42,18 +42,18 @@ CmdMeshBuildRegularSolid - + Mesh Mesh - + Regular solid... 標準實體... - - + + Builds a regular solid 建立一標準實體 @@ -61,18 +61,18 @@ CmdMeshCrossSections - + Mesh Mesh - + Cross-sections... 剖面... - - + + Cross-sections 剖面 @@ -80,19 +80,19 @@ CmdMeshDecimating - + Mesh Mesh - + Decimation... 十進制... - - - + + + Decimates a mesh 十進制網格 @@ -113,12 +113,12 @@ CmdMeshDifference - + Mesh Mesh - + Difference 差集 @@ -126,18 +126,18 @@ CmdMeshEvaluateFacet - + Mesh Mesh - + Face info 面資訊 - - + + Information about face 面之資訊 @@ -145,18 +145,18 @@ CmdMeshEvaluateSolid - + Mesh Mesh - + Check solid mesh 檢查固體網格 - - + + Checks whether the mesh is a solid 不論網格是否為實體均檢查 @@ -164,18 +164,18 @@ CmdMeshEvaluation - + Mesh Mesh - + Evaluate and repair mesh... 評估及修復網格... - - + + Opens a dialog to analyze and repair a mesh 開啟分析及修復網格對話窗 @@ -183,18 +183,18 @@ CmdMeshExport - + Mesh Mesh - + Export mesh... 匯出網格... - - + + Exports a mesh to file 匯出網格至檔案 @@ -202,18 +202,18 @@ CmdMeshFillInteractiveHole - + Mesh Mesh - + Close hole 封閉空洞 - - + + Close holes interactively 以交集封閉孔洞 @@ -221,18 +221,18 @@ CmdMeshFillupHoles - + Mesh Mesh - + Fill holes... 填滿空洞... - - + + Fill holes of the mesh 充填網格孔洞 @@ -240,18 +240,18 @@ CmdMeshFlipNormals - + Mesh Mesh - + Flip normals 翻轉法線 - - + + Flips the normals of the mesh 翻轉網格法線 @@ -259,18 +259,18 @@ CmdMeshFromGeometry - + Mesh Mesh - + Create mesh from geometry... 從幾何建立網格... - - + + Create mesh from the selected geometry 由所選幾何建立網格 @@ -278,17 +278,17 @@ CmdMeshFromPartShape - + Mesh Mesh - + Create mesh from shape... 由造型建立網格... - + Tessellate shape 格紋造型 @@ -296,18 +296,18 @@ CmdMeshHarmonizeNormals - + Mesh Mesh - + Harmonize normals 統一法線 - - + + Harmonizes the normals of the mesh 統一網格法線 @@ -315,18 +315,18 @@ CmdMeshImport - + Mesh Mesh - + Import mesh... 匯入網格... - - + + Imports a mesh from file 從檔案中匯入網格 @@ -334,12 +334,12 @@ CmdMeshIntersection - + Mesh Mesh - + Intersection 交集 @@ -347,17 +347,17 @@ CmdMeshMerge - + Mesh Mesh - + Merge 合併 - + Merges selected meshes into one 將所選網格合而為一 @@ -365,18 +365,18 @@ CmdMeshPolyCut - + Mesh Mesh - + Cut mesh 切割網格 - - + + Cuts a mesh with a picked polygon 以選取之多邊形切割網格 @@ -384,18 +384,18 @@ CmdMeshPolySegm - + Mesh Mesh - + Make segment 建立分割 - - + + Creates a mesh segment 建立網格分割 @@ -403,18 +403,18 @@ CmdMeshPolySelect - + Mesh Mesh - + Select mesh 選擇網格 - - + + Select an area of the mesh 選擇網格之區域 @@ -422,18 +422,18 @@ CmdMeshPolySplit - + Mesh Mesh - + Split mesh 分割網格 - - + + Splits a mesh into two meshes 分為兩個網格 @@ -441,18 +441,18 @@ CmdMeshPolyTrim - + Mesh Mesh - + Trim mesh 修剪網格 - - + + Trims a mesh with a picked polygon 依選定之多邊形修剪網格 @@ -460,18 +460,18 @@ CmdMeshRemeshGmsh - + Mesh Mesh - + Refinement... 精煉化... - - + + Refine existing mesh 精煉既有網格 @@ -479,18 +479,18 @@ CmdMeshRemoveCompByHand - + Mesh Mesh - + Remove components by hand... 手動移除元件... - - + + Mark a component to remove it from the mesh 使元件由網格中移出 @@ -498,18 +498,18 @@ CmdMeshRemoveComponents - + Mesh Mesh - + Remove components... 刪除元件... - - + + Remove topologic independent components from the mesh 自網格移除拓樸獨立元件 @@ -517,17 +517,17 @@ CmdMeshScale - + Mesh Mesh - + Scale... Scale... - + Scale selected meshes Scale selected meshes @@ -535,18 +535,18 @@ CmdMeshSectionByPlane - + Mesh Mesh - + Create section from mesh and plane Create section from mesh and plane - - + + Section from mesh and plane Section from mesh and plane @@ -554,18 +554,18 @@ CmdMeshSegmentation - + Mesh Mesh - + Create mesh segments... 建立網格分割... - - + + Create mesh segments 建立網格分割 @@ -573,18 +573,18 @@ CmdMeshSegmentationBestFit - + Mesh Mesh - + Create mesh segments from best-fit surfaces... Create mesh segments from best-fit surfaces... - - + + Create mesh segments from best-fit surfaces Create mesh segments from best-fit surfaces @@ -592,18 +592,18 @@ CmdMeshSmoothing - + Mesh Mesh - + Smooth... 平滑... - - + + Smooth the selected meshes 平滑化所選網格 @@ -649,18 +649,18 @@ CmdMeshTrimByPlane - + Mesh Mesh - + Trim mesh with a plane 以平面修剪網格 - - + + Trims a mesh with a plane 以平面修剪網格 @@ -681,18 +681,18 @@ CmdMeshVertexCurvature - + Mesh Mesh - + Curvature plot 曲率圖 - - + + Calculates the curvature of the vertices of a mesh 計算網格的頂點的曲率 @@ -700,18 +700,18 @@ CmdMeshVertexCurvatureInfo - + Mesh Mesh - + Curvature info 曲率資訊 - - + + Information about curvature 曲率資訊 @@ -1266,7 +1266,17 @@ Please run the command to repair folds first Export AMF files using compression - + + Width: + 寬度： + + + + Height: + 高度： + + + This parameter indicates whether ZIP compression is used when writing a file in AMF format This parameter indicates whether ZIP compression @@ -1925,7 +1935,7 @@ to a smoother appearance. Mesh_BoundingBox - + Boundings of %1: Boundings of %1: @@ -1933,26 +1943,26 @@ to a smoother appearance. Mesh_Union - - - - - - + + + + + + OpenSCAD OpenSCAD - - - + + + Unknown error occurred while running OpenSCAD. Unknown error occurred while running OpenSCAD. - - - + + + OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. 於您的系統上未發現OpenSCAD @@ -1975,146 +1985,161 @@ Please visit http://www.openscad.org/index.html to install it. 匯入-匯出 - + All Mesh Files 所有網格檔 - - + + Binary STL 二進位 STL - - - + + + ASCII STL ASCII STL - - + + Binary Mesh 二進位網格 - - + + Alias Mesh Alias 網格 - - + + Object File Format Obj檔案格式 - - + + Inventor V2.1 ascii Inventor V2.1 ascii - - + + Stanford Polygon Stanford Polygon - - + + All Files 所有檔案 - + Import mesh 匯入網格 - + Simple Model Format Simple Model Format - + X3D Extensible 3D X3D Extensible 3D - + + Compressed X3D + Compressed X3D + + + + WebGL/X3D + WebGL/X3D + + + VRML V2.0 VRML V2.0 - + Compressed VRML 2.0 壓縮之 VRML 2.0 - + Nastran Nastran - + Python module def Python模組設定 - + + Asymptote Format + Asymptote Format + + + Export mesh 匯出網格 - + Meshing Tolerance 網格公差 - + Enter tolerance for meshing geometry: 輸入製作網格幾何公差： - + The mesh '%1' is not a solid. 網格'%1'不為實體 - + The mesh '%1' is a solid. 網格'%1'為實體 - + Solid Mesh 固體網格 - + Boundings 範圍 - + Fill holes 填充孔 - + Fill holes with maximum number of edges: 填充開口藉由最多邊之數量： - + Scaling Scaling - + Enter scaling factor: Enter scaling factor: @@ -2124,43 +2149,43 @@ Please visit http://www.openscad.org/index.html to install it. [點：%1, 線：%2, 面：%3] - + Display components 顯示元件 - + Display segments Display segments - + Leave info mode 離開訊息模式 - + Index: %1 索引：%1 - + Leave hole-filling mode 離開填充孔模式 - + Leave removal mode 離開移除模式 - + Delete selected faces 刪除選定面 - + Clear selected faces 清除所選面 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.qm index f02597d655..581e29625b 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_af.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm index 0175279687..ed37194b4f 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm index 61acfef997..bca045cc8c 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm index 3c9cd3bd36..1096cb5ceb 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm index b570e10827..a5f4b6caa0 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm index 9144e34867..d3f8d43024 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm index 444d04fed5..9c70ea72eb 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm index c9be1f3dc3..f96dcf7095 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm index fce33fc9e6..a6232f6ece 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm index 3c8ba06b70..6d097fce2a 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm index f825e90348..486a555798 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm index 1d48716300..ec25360790 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm index 493861e659..1b87393a88 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm index 2032a238a5..234de06c9a 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm index 6a5b580609..9272fbe5c0 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm index b69edcff72..b4a839f43f 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts index e7d7b6faa7..de44eb96f1 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts @@ -65,7 +65,7 @@ Create section from mesh and plane - Crea una sezione da mesh e piano + Sezione da mesh e piano diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm index 72c0189da7..aac04b1191 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.qm index 426c214b46..a5c2b5abf9 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_kab.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm index 961c1e9e8c..98aeb794de 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm index 5e819334d6..d3be684fe0 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm index 39bd473003..34c081dacb 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.qm index 58579c7729..9fd2570422 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_no.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm index 0b0d05e484..7990d05470 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index cf7c05b3d9..8a189e8ab4 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -318,7 +318,7 @@ Surface deviation multiplied by the length of the current mesh segment (edge) Apply face colors to mesh - Stosowanie kolorów powierzchni do siatki + Zastosuj kolor powierzchni do siatki diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm index 9754092476..9699728cd7 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts index 2d43a752af..4c420e10ca 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts @@ -157,7 +157,7 @@ Failure - Failure + Falha @@ -354,7 +354,7 @@ The smallest value is 0. Estimate - Estimate + Estimar @@ -459,7 +459,7 @@ A value in the range of 0.2-10. Leave panel open - Leave panel open + Deixar painel aberto @@ -516,12 +516,12 @@ A value in the range of 0.2-10. Below - Below + Abaixo Above - Above + Acima diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm index 9b65c12c53..cb0cb1e966 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm index 9984b83c60..0d72b9133e 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm index a42dd1db84..968cb6d14b 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.qm index 514282d551..019022b735 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sk.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm index 4c7839a683..97d20b59ce 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts index 3f2041ece9..96dc8e7801 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts @@ -398,7 +398,7 @@ Najmanjša vrednost je 0. Mesh size grading: - Velikost elementov mreže: + Velikost gradnikov ploskovja: diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm index 71eaff7e62..223517bea9 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm index a881d5776b..626a6935fb 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm index 35521c4fc5..b91c5bd613 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm index efb1c89ee8..6723fd5765 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm index 6c8b55ee84..3955efb5f4 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm index 8f17e7d8ca..afcfb5a6f9 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm index deef857571..d5b11a4b6b 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm index 83caca8327..6003607fe0 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm index 8fda434ed3..7e6d3cdeb1 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts index 3420f1d5a4..30d18f7373 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK - + Add Voeg by - + Clear Maak skoon - + as Mesh as Mesh - + Add OpenSCAD Element Add OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D - + Unable to explode %s Unable to explode %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Replace Object - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part tools @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.qm index a4d729947a..ad17bd2e9f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts index c7f67caa4c..a5a4e947f6 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces تحويل الحروف الي اوجه - + Please select 3 objects first يرجي اختيار ثلاثة اعضاء اولا - + Unsupported Function وظيفة غير مدعومة - + Press OK إضغط على 'موافق' - + Add إضافة - + Clear مسح - + as Mesh كmesh - + Add OpenSCAD Element إضافة العنصر OpenSCAD - + Perform اداء - + Mesh Boolean جمع الmesh - + Error all shapes must be either 2D or both must be 3D خطأ يجب ان تكون جميع الاشكال ثنائية الابعاد او ثلاثية الابعاد - + Unable to explode %s لا يمكن تفجير مقدار %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... إضافة العنصر OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary اضافة عنصر OpenSCAD عن طريق ادخال رمز OpenSCAD و تنفيذ نظام OpenSCAD الثنائي @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes تلوين الاشكال - + Color Shapes by validity and type تلوين الاشكال حسب صلاحيتها ونوعها @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces تحويل الحروف الي اوجه @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements توسيع المواضع - + Expand all placements downwards the FeatureTree توسيع كافة المواضع اسفل الFeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group تفجير مجموعة - + Remove fusion, apply placement to children, and color randomly ازالة الدمج, تطبيق الموضع علي الاشكال الفرعية و التلوين عشوائيا @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull هيكل السفينة - + Perform Hull تنفيذ التقشير @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature زيادة خاصية التسامح في الاخطاء - + Create Feature that allows to increase the tolerance انشاء خاصية تسمح بزيادة نسبة التسامح في الاخطاء @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... جمع الmesh... - + Export objects as meshes and use OpenSCAD to perform a boolean operation تصدير الاعضاء كmesh واستخدام OpenSCAD لتنفيذ عملية الدمج @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski مينكوفسكي - + Perform Minkowski تنفيذ مينكوفسكي @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + خاصية عكس التصميم... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature خاصية صقل الشكل - + Create Refine Shape Feature انشاء خاصية صقل الشكل @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children ازالة الاعضاء و الاشكال الفرعية الخاصة بهم - + Removes the selected objects and all children that are not referenced from other objects إزالة الأعضاء المحددة وجميع الاشكال الفرعية التي لم تتم انسابها الي اعضاء أخرى @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object استبدال العنصر - + Replace an object in the Feature Tree. Please select old, new, and parent object تبديل عضو في فرع الخصائص. يرجي اختيار شكل قديم و آخر جديد و شكل رئيسي + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools ادوات OpenSCAD الخاصة بالجزء @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm index 47904cc24c..3de6371d11 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts index 2d15d5d14f..1654eda7cf 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convertir arestes a cares - + Please select 3 objects first Selecciona 3 objectes primer - + Unsupported Function Funció no suportada - + Press OK Premeu OK - + Add Afig - + Clear Neteja - + as Mesh com a malla - + Add OpenSCAD Element Afegir un element OpenSCAD - + Perform Realitza - + Mesh Boolean Malla booleana - + Error all shapes must be either 2D or both must be 3D Error, totes les formes han de ser 2D o bé les dues han de ser 3D - + Unable to explode %s Impossible descomposar %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Afegir un element OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Afegeix un element OpenSCAD entrant el codi de OpenSCAD i executar el binari de OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Formes de color - + Color Shapes by validity and type Colorejar les Formes per validació i tipus @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir Arestes en Cares @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandir Col.locacions - + Expand all placements downwards the FeatureTree Expandir totes les posicions cap avall en l'Arbre de Recursos @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Descomposar Grup - + Remove fusion, apply placement to children, and color randomly Eliminar una fusió, aplicar un posicionament als fills i donar un color aleatori @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Realitzar Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Incrementar la funció de Tolerància - + Create Feature that allows to increase the tolerance Crear la Funció que permet l'increment de la tolerància @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malla boleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportar objectes com a malles i utilitzar OpenSCAD per dur a terme una operació booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Realitzar Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Funció Refinar Forma - + Create Refine Shape Feature Funció Crear Forma Refinada @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Eliminar objectes i els seus fills - + Removes the selected objects and all children that are not referenced from other objects Elimina els objectes seleccionats i tots els fills que no facin referència a d'altres objectes @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Reemplaçar objecte - + Replace an object in the Feature Tree. Please select old, new, and parent object Reemplaçar un objecte en l'Arbre de Funcions. Seleccioneu l'antic, el nou i l'objecte pare + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Eines Part d'OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Eines OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm index 630521e68c..d9e7f08111 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts index 21ec24aaea..26246d5a60 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Převod hran na stěny - + Please select 3 objects first Nejdříve prosím vyberte 3 objekty - + Unsupported Function Nepodporovaná funkce - + Press OK Stiskněte OK - + Add Přidat - + Clear Vyčistit - + as Mesh jako síť - + Add OpenSCAD Element Přidat prvek OpenSCAD - + Perform Provést - + Mesh Boolean Booleovské operace se sítí - + Error all shapes must be either 2D or both must be 3D Chyba, všechny tvary musí být buď 2D nebo 3D - + Unable to explode %s Není možné rozložit %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Přidat prvek OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Přidat OpenSCAD element zadáním a spuštěním kódu OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Barva ploch - + Color Shapes by validity and type Obarvit tvary podle platnosti a typu @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Převod hran na stěny @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Rozbalit umístění - + Expand all placements downwards the FeatureTree Rozbalit všechna umístění ve stromě funkcí @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Rozbít skupinu - + Remove fusion, apply placement to children, and color randomly Odstranit sloučení, převzít umístění potomků a obarvit náhodně @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull trup, skořepina - + Perform Hull Vytvořit skořepinu @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Zvýšit toleranci prvku - + Create Feature that allows to increase the tolerance Vytvrořit prvek, který umožňuje zvýšení tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Booleovské operace se sítí... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportovat objekty jako síťě a booleovskou operaci provést pomocí OpenSCADu @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowského operace - + Perform Minkowski Provést MInkowského operaci @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Funkce zrcadlení sítě... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Vytvořit funkci zrcadlení sítě OpenSCAD_RefineShapeFeature - + Refine Shape Feature Vyčištění tvarového prvku - + Create Refine Shape Feature Vytvořit Vyčištění tvarobého prvku @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Odstranit objekty a jejich potomky - + Removes the selected objects and all children that are not referenced from other objects Odstranit vybrané objekty a všechny potomky, na které není odkaz z jiných objektů @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Nahradit objekt - + Replace an object in the Feature Tree. Please select old, new, and parent object Nahrazení objektu ve stromu funkcí. Vyberte prosím starý, nový a nadřazený objekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Nástroje součástí OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Nástroje OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm index a967a3437a..8f80648430 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts index bac89f94ed..4944d96ce2 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Konvertieren von Kanten zu Flächen - + Please select 3 objects first Bitte wählen Sie zuerst 3 Objekte - + Unsupported Function Nicht unterstützte Funktion - + Press OK Drücken Sie OK - + Add Hinzufügen - + Clear Löschen - + as Mesh als Polygonnetz - + Add OpenSCAD Element OpenSCAD Element einfügen - + Perform Ausführen - + Mesh Boolean Boolsche Operation als Polygonnetz - + Error all shapes must be either 2D or both must be 3D Fehler. Alle Formen müssen entweder 2D oder 3D sein - + Unable to explode %s Kann %s nicht zerlegen @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD Element einfügen... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Füge ein OpenSCAD-Element hinzu, durch Eingabe von OpenSCAD-Code und Ausführen des OpenSCAD Programms @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Formen einfärben - + Color Shapes by validity and type Formen nach Gültigkeit und Typ einfärben @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Kanten zu Flächen umwandeln @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Erweitere Platzierungen - + Expand all placements downwards the FeatureTree Erweitere alle Platzierungen nach unten im Feature Baum @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Gruppe auflösen - + Remove fusion, apply placement to children, and color randomly Entfernt die Verschmelzung, wendet die Platzierung auf die untergeordneten Elemente an und färbt sie zufällig @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Rumpf - + Perform Hull Konvexe Hülle berechnen @@ -268,25 +268,25 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Toleranz erhöhen - + Create Feature that allows to increase the tolerance - Erstellen der Funktion, die ermöglicht, die Toleranz zu erhöhen + Erstelle Funktion, die es ermöglicht die Toleranz zu erhöhen OpenSCAD_MeshBoolean - + Mesh Boolean... Boolsche Operation als Polygonnetz... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportiert Objekte als Netze und verwendet OpenSCAD, um eine boolesche Operation auszuführen @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Minkowskiprodukt berechnen @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Mesh-Eigenschaft spiegeln... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Mirror Mesh Funktion erstellen OpenSCAD_RefineShapeFeature - + Refine Shape Feature Form Feature verfeinern - + Create Refine Shape Feature Erstelle verfeinertes Form Feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Objekte entfernen samt Kinder - + Removes the selected objects and all children that are not referenced from other objects Entfernt die ausgewählten Objekte und alle Kinder, die nicht von anderen Objekten referenziert werden @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Objekt ersetzen - + Replace an object in the Feature Tree. Please select old, new, and parent object Ersetzt ein Objekt im Feature-Baum. Bitte wählen Sie altes, neues und übergeordnetes Objekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part-Werkzeuge @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.qm index 9bf7b1b6e7..7ca0819853 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts index d67e5c49a7..75ac6a3db5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Μετατροπή Ακμών σε Όψεις - + Please select 3 objects first Παρακαλώ επιλέξτε πρώτα 3 αντικείμενα - + Unsupported Function Μη υποστηριζόμενη Λειτουργία - + Press OK Πιέστε το OK - + Add Προσθήκη - + Clear Εκκαθάριση - + as Mesh ως Πλέγμα - + Add OpenSCAD Element Προσθήκη Στοιχείου OpenSCAD - + Perform Εκτέλεση - + Mesh Boolean Δημιουργία Πλέγματος με τη χρήση Λειτουργιών Boole - + Error all shapes must be either 2D or both must be 3D Σφάλμα πρέπει είτε να είναι όλα τα σχήματα δισδιάστατα είτε να είναι όλα τρισδιάστατα - + Unable to explode %s Αδυναμία κατακερματισμού του %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Προσθήκη στοιχείου OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Προσθέστε ένα στοιχείο OpenSCAD εισάγοντας κώδικα OpenSCAD και εκτελώντας το δυαδικό OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Χρωματισμός Σχημάτων - + Color Shapes by validity and type Χρωματισμός Σχημάτων με βάση την εγκυρότητα και τον τύπο τους @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Μετατροπή Ακμών σε Όψεις @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Επέκταση Τοποθετήσεων - + Expand all placements downwards the FeatureTree Επέκταση όλων των τοποθετήσεων προς τα κάτω στο Δενδροδιάγραμμα Χαρακτηριστικών @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Κατακερματισμός Ομάδας - + Remove fusion, apply placement to children, and color randomly Αναίρεση συγχώνευσης, εφαρμογή τοποθέτησης στα θυγατρικά στοιχεία, και τυχαίος χρωματισμός @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Κέλυφος - + Perform Hull Εκτέλεση Υπολογισμών Κελύφους @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Χαρακτηριστικό Αύξησης Ανοχής - + Create Feature that allows to increase the tolerance Δημιουργήστε Χαρακτηριστικό που επιτρέπει την αύξηση της ανοχής @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Δημιουργία Πλέγματος με τη χρήση Λειτουργιών Boole... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Εξαγάγετε αντικείμενα ως πλέγματα και χρησιμοποιήστε το OpenSCAD για να εκτελέσετε μια λειτουργία Boole @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Εκτέλεση Υπολογισμών Αθροίσματος Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Χαρακτηριστικό Τελειοποίησης Σχήματος - + Create Refine Shape Feature Δημιουργία Χαρακτηριστικού Τελειοποίησης Σχήματος @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Αφαιρέστε Αντικείμενα και τα Θυγατρικά τους Στοιχεία - + Removes the selected objects and all children that are not referenced from other objects Αφαιρεί τα επιλεγμένα αντικείμενα και όλα τα θυγατρικά στοιχεία που δεν αναφέρονται από άλλα αντικείμενα @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Αντικατάσταση Αντικειμένου - + Replace an object in the Feature Tree. Please select old, new, and parent object Αντικαταστήστε ένα αντικείμενο στο Δενδροδιάγραμμα Χαρακτηριστικών. Παρακαλώ επιλέξτε παλιό, καινούριο και γονικό αντικείμενο + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Εργαλεία Εξαρτημάτων OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Εργαλεία OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm index 27b41647bc..b55b3d412f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts index 333852bde9..bfbd805875 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convertir aristas en caras - + Please select 3 objects first Por favor, seleccione tres objetos primero - + Unsupported Function Función no admitida - + Press OK Pulse Aceptar - + Add Añadir - + Clear Limpiar - + as Mesh como malla - + Add OpenSCAD Element Añadir elemento OpenSCAD - + Perform Realizar - + Mesh Boolean Malla booleana - + Error all shapes must be either 2D or both must be 3D Error, todos los cuerpos han de ser o bien 2D, o bien 3D - + Unable to explode %s Incapaz de descomponer %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Añadir elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Agregar un elemento OpenSCAD mediante código OpenSCAD y ejecutar el binario OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color de formas - + Color Shapes by validity and type Color de Forma por validez y tipo @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir Aristas en Caras @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Ampliar Colocaciones - + Expand all placements downwards the FeatureTree Expandir todas las colocaciones hacia abajo del Árbol de Funciones @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Descomponer Grupo - + Remove fusion, apply placement to children, and color randomly Retire fusión, la situación se aplica a los sub objectos y el color al azar @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Casco - + Perform Hull Realizar casco @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Aumentar la característica de tolerancia - + Create Feature that allows to increase the tolerance Crear función que permite para aumentar la tolerancia @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malla booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportar objetos como mallas y utilizar OpenSCAD para realizar una operación booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Realizar Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Operación Malla de Espejo... - + Create Mirror Mesh Feature Crear operación Malla de Espejo @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Función Refinar Forma - + Create Refine Shape Feature Función Crear Forma Refinada @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Eliminar objetos y sus hijos - + Removes the selected objects and all children that are not referenced from other objects Elimina los objetos seleccionados y todos los hijos que no hagan referencia a otros objetos @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Reemplazar objeto - + Replace an object in the Feature Tree. Please select old, new, and parent object Vuelva a colocar un objeto en el árbol de propiedades. Por favor seleccione viejo, nuevo y objeto primario + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Herramientas OpenSCAD parte @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Herramientas OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.qm index 16a6465ad5..1190dc2354 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts index 5407ef54d0..c59262e269 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Bihurtu ertzak aurpegi - + Please select 3 objects first Lehenengo, hautatu 3 objektu - + Unsupported Function Onartzen ez den funtzioa - + Press OK Sakatu 'Ados' - + Add Gehitu - + Clear Garbitu - + as Mesh amaraun gisa - + Add OpenSCAD Element Ireki OpenSCAD elementua - + Perform Egin - + Mesh Boolean Amaraun boolearra - + Error all shapes must be either 2D or both must be 3D Errorea, forma guztiek 2D izan behar dute edo 3D izan behar dute - + Unable to explode %s Ezin izan da %s lehertu @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Gehitu OpenSCAD elementua... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Gehitu OpenSCAD elementu bat OpenSCAD kodea sartuz eta OpenSCAD bitarra exekutatuz @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Koloreztatu formak - + Color Shapes by validity and type Koloreztatu formak baliozkotasunaren eta motaren arabera @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Bihurtu ertzak aurpegi @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Hedatu kokapenak - + Expand all placements downwards the FeatureTree Hedatu kokapen guztiak elementu-zuhaitzean beherantz @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Lehertu taldea - + Remove fusion, apply placement to children, and color randomly Kendu fusioa, aplikatu kokapena haurrei, eta koloreztatu ausaz @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Krosko - + Perform Hull Egin kroskoa @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Handitu tolerantzia-elementua - + Create Feature that allows to increase the tolerance Sortu tolerantzia handitzea ahalbidetzen duen elementua @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Amaraun boolearra... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Esportatu objektuak amaraun gisa eta erabili OpenSCAD eragiketa boolearra egiteko @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Egin Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Forma finduko elementua - + Create Refine Shape Feature Sortu forma finduko elementua @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Kendu objektuak eta haien haurrak - + Removes the selected objects and all children that are not referenced from other objects Beste objektu batzuetan erreferentzia ez duten hautatutako objektuak eta haien haurrak kentzen ditu @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Ordeztu objektua - + Replace an object in the Feature Tree. Please select old, new, and parent object Ordeztu objektu bat elementu-zuhaitzean. Hautatu objektu zaharra, berria eta gurasoa + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD piezen tresna @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD tresnak diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm index bcba2a9c3a..25f293ff70 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts index e13b887d46..a46fb245b0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts @@ -116,7 +116,7 @@ The path to the OpenSCAD executable - The path to the OpenSCAD executable + Polku OpenSCADilla ajettavaan tiedostoon @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Muunna reunat tahkoiksi - + Please select 3 objects first Valitse 3 objektia ensin - + Unsupported Function Toiminto jota ei tueta - + Press OK Paina OK - + Add Lisää - + Clear Tyhjennä - + as Mesh pintaverkkona - + Add OpenSCAD Element Lisää OpenSCAD-elementti - + Perform Suorita - + Mesh Boolean verkkopinta Boolean - + Error all shapes must be either 2D or both must be 3D Virhe: kaikki muodot on oltava joko 2D tai molemmat oltava 3D - + Unable to explode %s Ei onnistuta räjäyttämään auki %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Lisää OpenSCAD-elementti... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Lisää OpenSCAD-elementti syöttämällä OpenSCAD koodi ja suorittamalla OpenSCAD binääri @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Väritä muodot - + Color Shapes by validity and type Väritä muotoja riippuen tyypistä ja käypyydestä @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Muunna reunat tahkoiksi @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Laajenna Sijoitteluja - + Expand all placements downwards the FeatureTree Laajenna sijoitteluja ominaisuuspuussa alaspäin @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Räjäytä ryhmä - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Runko - + Perform Hull Tee runko @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Lisää sallittu poikkeama -ominaisuutta - + Create Feature that allows to increase the tolerance Luo ominaisuus, jonka avulla voit lisätä sallittua poikkeamaa @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... verkkopinta Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Suorita Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Tarkenna muoto ominaisuutta - + Create Refine Shape Feature Luo tarkenna muoto ominaisuutta @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Poista objektit ja niiden jälkeläiset - + Removes the selected objects and all children that are not referenced from other objects Poistaa valitut objektit ja kaikki niiden jälkeläiset joihin ei viitata muista objekteista @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Korvaa objekti - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD osan työkalut @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTyökalut diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.qm index ead2cd7f13..668c77f257 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts index 1a4c12f072..3a79907819 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces I-convert ang mga edge na maging mga face - + Please select 3 objects first Mangyaring pumili muna ng 3 mga object - + Unsupported Function Hindi suportadong Function - + Press OK I-press ang OK - + Add Magdugtong - + Clear Malinaw - + as Mesh bilang Mesh - + Add OpenSCAD Element Magdagdag ng Elemento ng OpenSCAD - + Perform Magsagawa - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Kamalian lahat ng mga hugis ay dapat na alinman sa 2D o parehong 3D - + Unable to explode %s Hindi nagawang mag explode %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Magdagdag ng Elemento ng OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Magdagdag ng isang elemento ng OpenSCAD sa pamamagitan ng pag enter ng OpenSCAD code at pagsasagawa ng OpenSCAD binary @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Kulayan ang mga hugis - + Color Shapes by validity and type Kulayan ang mga hugis sa pamamagitan ng validity at uri @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces I-convert ang mga Edge na maging mga Face @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements I-expand ang mga Placement - + Expand all placements downwards the FeatureTree I-expand lahat ng mga placement pababa ng FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + Remove fusion, apply placement to children, and color randomly Alisin ang fusion, ilapat ang pagkakalagay sa mga bata, at kulayan ng walang sinusunod na bilang @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Magsagawa ng Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Dagdagan ang feature ng Tolerance - + Create Feature that allows to increase the tolerance Lumikha ng feature na magbibigay daan para tumaas ang tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation I-export ang mga bagay bilang meshes at gamitin ang OpenSCAD upang magsagawa ng operasyon ng boolean @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Magsagawa ng Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature I-refine ang feature ng Hugis - + Create Refine Shape Feature Lumikha ng refine shape feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Alisin ang mga object at kanilang Children - + Removes the selected objects and all children that are not referenced from other objects Nag aalis ng mga napiling mga object at lahat ng children na hindi na reference mula sa ibang mga object @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Palitan ang Object - + Replace an object in the Feature Tree. Please select old, new, and parent object Palitan ang isang bagay sa Feature Tree. Mangyaring pumili ng luma, bago, at sanhi na bagay + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part tools @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm index 5761d66fe6..8d285de0ef 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts index f8d40df77d..cf66f6dffa 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convertir les arêtes en faces - + Please select 3 objects first Veuillez d'abord sélectionner 3 objets - + Unsupported Function Fonction non supportée - + Press OK Appuyez sur OK - + Add Ajouter - + Clear Effacer - + as Mesh comme Maillage - + Add OpenSCAD Element Ajouter un élément OpenSCAD - + Perform Effectuer - + Mesh Boolean Opération booléenne avec maillage - + Error all shapes must be either 2D or both must be 3D Erreur les formes doivent être soit toutes 3D, soit toutes 2D - + Unable to explode %s Impossible d'exploser %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Ajouter un élément OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Ajouter un élément OpenSCAD par la saisie de code OpenSCAD et l'exécution du binaire OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colorer les formes - + Color Shapes by validity and type Colorer les formes par la validité et le type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir les arêtes en faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Développer les placements - + Expand all placements downwards the FeatureTree Développer tous les placements vers le bas dans l'arborescence @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Dégrouper - + Remove fusion, apply placement to children, and color randomly Supprimer la fusion, appliquer le placement aux enfants et donner une couleur aléatoire @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Enveloppe - + Perform Hull Effectuer l'enveloppe convexe @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Augmenter la tolérance - + Create Feature that allows to increase the tolerance Créez une fonction qui permet d'augmenter la tolérance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Opération booléenne avec Maillage... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exporter les objets sous forme de maillage et utiliser OpenSCAD pour effectuer une opération booléenne @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Somme de Minkowski - + Perform Minkowski Appliquer une Somme de Minkowski @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Miroir du maillage... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Créer un miroir du maillage OpenSCAD_RefineShapeFeature - + Refine Shape Feature Fonction d'affinage de la forme - + Create Refine Shape Feature Créer une fonction d'affinage de la forme @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Supprimer les objets et leurs enfants - + Removes the selected objects and all children that are not referenced from other objects Supprime les objets sélectionnés et tous les enfants qui ne sont pas référencés par d'autres objets @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Remplacer l'objet - + Replace an object in the Feature Tree. Please select old, new, and parent object Remplacer un objet dans l'arborescence. Veuillez sélectionner l'ancien objet, le nouveau et l'objet parent + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Outils de pièces OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Outils OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.qm index ac4ca4a9d5..b56d70306d 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts index 17c455c354..86e11e77f8 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Converter Arestas para Faces - + Please select 3 objects first Por favor, escolme primeiro 3 obxectos - + Unsupported Function Función non soportada - + Press OK Prema OK - + Add Engadir - + Clear Baleirar - + as Mesh coma malla - + Add OpenSCAD Element Engadir elemento OpenSCAD - + Perform Efectuar - + Mesh Boolean Malla booleana - + Error all shapes must be either 2D or both must be 3D Erro: tódalas formas deben ser ou ben 2D ou ben 3D - + Unable to explode %s Non é posíbel estoupar %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Engadir elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Engadir un elemento OpenSCAD inserindo o código OpenSCAD e executando o binario OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Corar Formas - + Color Shapes by validity and type Corar Formas por validez e tipo @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converter arestas en faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Espallar posicións - + Expand all placements downwards the FeatureTree Espallar tódalas posicións cara baixo na árbore de recursos @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Estoupar grupo - + Remove fusion, apply placement to children, and color randomly Desbotar a fusión, aplicar a situación dos sub-obxectos e corar ó chou @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Casco - + Perform Hull Facer casca @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Medrar a característica de tolerancia - + Create Feature that allows to increase the tolerance Crear un recurso que fai medrar a tolerancia @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malla booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportar obxectos como mallas e usar OpenSCAD para efectuar unha operación booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Efectuar Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Función de refino de Forma - + Create Refine Shape Feature Crear un recurso de refino de Forma @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Rexeitar os obxectos mais os seus fillos - + Removes the selected objects and all children that are not referenced from other objects Desbota os obxectos escolmados e tódolos fillos que non están referenciados doutros obxectos @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Trocar obxecto - + Replace an object in the Feature Tree. Please select old, new, and parent object Trocar un obxecto na árbore de recursos. Por favor escolme antigo, novo e obxecto pai + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Ferramentas de Peza OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Ferramentas OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm index 662db88e84..6f29870a71 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts index ff63223477..c9f11965d5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Pretvori rubove u površine - + Please select 3 objects first Molim odaberite tri oblika - + Unsupported Function Nepodržana funkcija - + Press OK Pritisnite OK - + Add Dodaj - + Clear Brisanje - + as Mesh kao Mesh - + Add OpenSCAD Element Dodaj OpenSCAD Element - + Perform Izvedi - + Mesh Boolean Booleova mreža - + Error all shapes must be either 2D or both must be 3D Greška, svi oblici moraju biti 2D ili oba moraju biti 3D - + Unable to explode %s Nije moguće razdijeliti %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Dodaj OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Dodaj OpenSCAD element unošenjem OpenSCAD koda i pokretanjem OpenSCAD binarne datoteke @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Oboji oblike - + Color Shapes by validity and type Oboji oblike po tipu i valjanosti @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Pretvori rubove u površine @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Proširi postavljanja - + Expand all placements downwards the FeatureTree Proširi sva postavljanja niže u stablu svojstava @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Razdijeli grupu - + Remove fusion, apply placement to children, and color randomly Ukloni fuziju, dodaj položaj na potomke i obojaj ih slučajno @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Trup - + Perform Hull Izvođenje trupa @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Povećaj toleranciju - + Create Feature that allows to increase the tolerance Stvaranja svojstva koje omogućuje da se poveća tolerancija @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Booleova mreža... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Izvoz objekata kao mreže i koristi OpenSCAD za izvođenje logičkih ( boolean) operacija @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Izvođenje Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Svojstva zrcaljenja mreža... - + Create Mirror Mesh Feature Stvori svojstvo zrcaljenja mreža @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Izgladi oblik svojstvo - + Create Refine Shape Feature Kreiraj "Izgladi Oblik" svojstvo @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Izbriši objekte i njihove potomke - + Removes the selected objects and all children that are not referenced from other objects Briše odabrani objekt i sve potomke koji nisu referencirani od ostalih objekata @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Zamjeni objekt - + Replace an object in the Feature Tree. Please select old, new, and parent object Zamijeni objekt u stablu svojstava. Odaberite stari, novi, i roditeljski objekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD alati za Dio @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD Alati diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm index 5629117b89..3ee825cb34 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts index e8f10a5a11..cafa988207 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Élek felületté konvertálása - + Please select 3 objects first Kérem válasszon ki először 3 tárgyat - + Unsupported Function Nem támogatott funkció - + Press OK OK-ra kattintson - + Add Hozzáad - + Clear Törlés - + as Mesh a háló - + Add OpenSCAD Element OpenSCAD elem hozzáadása - + Perform Végrehajt - + Mesh Boolean Logikai háló - + Error all shapes must be either 2D or both must be 3D Hiba, az alakzatok 2D-ek legyenek vagy mindkettő 3D legyen - + Unable to explode %s Képtelen szétrobbantani ezt %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD elem hozzáadása... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adjunk hozzá egy OpenSCAD elemet egy OpenSCAD kód hozzáadásával és hajtsa végre az OpenSCAD binárist @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Alakzatok színezése - + Color Shapes by validity and type Alakzatok színezése az érvényesség és típus szerint @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Élek konvertálása felületekké @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Bontsa ki az elhelyezések - + Expand all placements downwards the FeatureTree Bontsa ki az összes elhelyezést lefelé a TulajdonságFában @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Csoport szétrobbantása - + Remove fusion, apply placement to children, and color randomly Távolítsa el a fúziót, alkalmazzon véletlenszerű elhelyezést az alárendeltekre és a színre @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Héj - + Perform Hull Héj létrehozás @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Növelje a tűréshatár tulajdonságot - + Create Feature that allows to increase the tolerance Tulajdonságot hoz létre, mely lehetővé teszi a tűréshatár növelését @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Logikai háló... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Hálóként exportálja a tárgyakat és egy logikai művelet végrehajtásához használja az OpenSCAD-t @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Minkowski végrehajtás @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Tükrözött Háló Funkció... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Tükrözött Háló Funkció Létrehozása OpenSCAD_RefineShapeFeature - + Refine Shape Feature Alakzat tulajdonság finomítása - + Create Refine Shape Feature Alakzat tulajdonság finomítás létrehozása @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Objektum és az összes al objektuma eltávolítása - + Removes the selected objects and all children that are not referenced from other objects Eltávolítja a kijelölt objektumokat és minden al objektumár, melyek nem hivatkoznak más objektumokra @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Cserélje ki az objektumot - + Replace an object in the Feature Tree. Please select old, new, and parent object Visszahelyez egy objektumot a tulajdonság fában. Kérjük, válasszon régi, új, és a szülő objektumot + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD alkatrész eszközök @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADeszközök diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.qm index 6eab969d3c..06879c8e84 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts index a58955ec93..2657d7f0fd 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Mengkonversi Tepi ke Wajah - + Please select 3 objects first Silahkan pilih 3 objek terlebih dahulu - + Unsupported Function Fungsi Tidak Didukung - + Press OK Tekan OK - + Add Menambahkan - + Clear Bersih - + as Mesh sebagai Mesh - + Add OpenSCAD Element Tambahkan Elemen OpenSCAD - + Perform Melakukan - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Kesalahan semua bentuk harus 2D atau keduanya harus 3D - + Unable to explode %s Tidak dapat meledak % s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Tambahkan Elemen OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Tambahkan elemen OpenSCAD dengan memasukkan kode OpenSCAD dan jalankan biner OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Bentuk Warna - + Color Shapes by validity and type Bentuk Warna menurut validitas dan tipe @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Mengkonversi Tepi Untuk Wajah @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Perluas Penempatan - + Expand all placements downwards the FeatureTree Perluas semua penempatan ke bawah FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Grup Explode - + Remove fusion, apply placement to children, and color randomly Menghapus fusion, menerapkan penempatan untuk anak-anak, dan warna secara acak @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Lambung kapal - + Perform Hull Lakukan Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Tingkatkan Fitur Toleransi - + Create Feature that allows to increase the tolerance Buat Fitur yang memungkinkan untuk meningkatkan toleransi @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Ekspor benda-benda seperti jerat dan menggunakan OpenSCAD untuk melakukan operasi boolean @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Lakukan Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Pertajam Bentuk Fitur - + Create Refine Shape Feature Buat Perbaiki Bentuk Fitur @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Hapus Objek dan Anak-anak mereka - + Removes the selected objects and all children that are not referenced from other objects Menghapus objek yang dipilih dan semua anak yang tidak dirujuk dari benda lain @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Ganti Objek - + Replace an object in the Feature Tree. Please select old, new, and parent object Mengganti sebuah objek di Pohon Fitur. Silahkan pilih tua, baru, dan objek induk + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD bagian alat @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm index 3e1ad202ba..80f7e78539 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts index 2cfff6009b..ba8aaf6a9d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Converte i bordi in facce - + Please select 3 objects first Seleziona prima 3 oggetti - + Unsupported Function Funzione non supportata - + Press OK Premere OK - + Add Aggiungi - + Clear Pulisci - + as Mesh come Mesh - + Add OpenSCAD Element - Aggiungi un elemento OpenSCAD + Aggiunge un elemento OpenSCAD - + Perform Esegui - + Mesh Boolean - Booleana su Mesh + Booleana su mesh - + Error all shapes must be either 2D or both must be 3D Errore. Le forme devono essere tutte 2D o tutte 3D - + Unable to explode %s Impossibile scomporre %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Aggiungi un elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Aggiunge un elemento OpenSCAD inserendo il codice OpenSCAD ed eseguendo il binario di OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colore delle forme - + Color Shapes by validity and type Colore delle forme per validità e tipo @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converti i bordi in facce @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements - Espandi posizionamenti + Espandi le posizioni - + Expand all placements downwards the FeatureTree Espande tutti i posizionamenti sotto la struttura Feature @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group - Scomponi il gruppo + Esplodi il gruppo - + Remove fusion, apply placement to children, and color randomly Rimuove la fusione, applica in modo casuale il posizionamento e il colore ai figli @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Esegui Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - Aumenta la tolleranza + Incrementa la tolleranza - + Create Feature that allows to increase the tolerance Crea la funzione che permette di aumentare la tolleranza @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... - Mesh Booleana... + Booleana su mesh... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Esporta gli oggetti come mesh e utilizza OpenSCAD per eseguire un'operazione booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Esegui Minkowski @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Specchia la mesh... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Crea una funzione mesh specchiata OpenSCAD_RefineShapeFeature - + Refine Shape Feature - Crea una forma ripulita + Affina la forma - + Create Refine Shape Feature Crea una forma ripulita, senza le linee residue e inutili @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Rimuovi gli oggetti e i loro figli - + Removes the selected objects and all children that are not referenced from other objects Rimuove gli oggetti selezionati e tutti i figli che non sono riferiti ad altri oggetti @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object - Sostituisci oggetti + Sostituisci un oggetto - + Replace an object in the Feature Tree. Please select old, new, and parent object Sostituisce un oggetto nella struttura ad albero. Si prega di selezionare l'oggetto vecchio, il nuovo e il genitore + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Strumenti OpenSCAD Part @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Strumenti OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm index ba99aa55c9..aaff0eb00c 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts index f5c9dd0698..83ed41ae8a 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces エッジを面に変換 - + Please select 3 objects first まず最初にオブジェクトを3つ選択してください - + Unsupported Function サポートされていない関数です - + Press OK OKを押してください - + Add 追加 - + Clear クリア - + as Mesh メッシュとして - + Add OpenSCAD Element OpenSCAD 要素を追加 - + Perform 実行 - + Mesh Boolean メッシュのブール演算 - + Error all shapes must be either 2D or both must be 3D エラー：全てのシェイプは2D、3Dまたはその両方である必要があります - + Unable to explode %s %s を分解できません @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD 要素を追加 - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary OpenSCADコードを入力してOpenSCADバイナリを実行することでOpenSCAD要素を追加します @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes カラー形状 - + Color Shapes by validity and type 有効性とタイプによるカラー形状 @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces エッジを面に変換 @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements 配置を展開 - + Expand all placements downwards the FeatureTree フィーチャーツリー下のすべての配置を展開 @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group グループを分解 - + Remove fusion, apply placement to children, and color randomly 融合体を取り除き、子に位置を与え、ランダムな色を付けます。 @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull 凸包 - + Perform Hull フルを計算 @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature トレランスフィーチャーを増加 - + Create Feature that allows to increase the tolerance トレランスを増加できるようにフィーチャーを作成 @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... メッシュのブール演算... - + Export objects as meshes and use OpenSCAD to perform a boolean operation メッシュとしてオブジェクトをエクスポートし、ブーリアン演算のためにOpenSCADを使用します。 @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski ミンコフスキー - + Perform Minkowski ミンコフスキーを演算 @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature メッシュを鏡像コピーしたフィーチャーを作成 @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature リファインシェイプフィーチャー - + Create Refine Shape Feature リファインシェイプフィーチャーを作成 @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children オブジェクトとその子オブジェクトを削除 - + Removes the selected objects and all children that are not referenced from other objects 選択されているオブジェクトと他のオブジェクトから参照されていないその子オブジェクトを全て削除 @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object オブジェクトの置換 - + Replace an object in the Feature Tree. Please select old, new, and parent object フィーチャーツリーのオブジェクトを置換します。古いオブジェクト、新規オブジェクト、親オブジェクトを選択してください。 + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD パーツ・ツール @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADツール diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.qm index 9a5c1c5784..97a31ca05f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts index 03de193152..94b79a800e 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convertir les arêtes en faces - + Please select 3 objects first Veuillez d'abord sélectionner 3 objets - + Unsupported Function Fonction non supportée - + Press OK Appuyez sur OK - + Add Add - + Clear Clear - + as Mesh comme Maillage - + Add OpenSCAD Element Ajouter un élément OpenSCAD - + Perform Effectuer - + Mesh Boolean Opération booléenne avec maillage - + Error all shapes must be either 2D or both must be 3D Erreur les formes doivent être soit toutes 3D, soit toutes 2D - + Unable to explode %s Impossible d'exploser %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Ajouter un élément OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Ajouter un élément OpenSCAD par la saisie de code OpenSCAD et l'exécution du binaire OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colorer les formes - + Color Shapes by validity and type Colorer les formes par la validité et le type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir les arêtes en faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Développer les placements - + Expand all placements downwards the FeatureTree Développer tous les placements vers le bas dans l'arborescence @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Dégrouper - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Enveloppe - + Perform Hull Effectuer l'enveloppe convexe @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Augmenter la tolérance - + Create Feature that allows to increase the tolerance Créez une fonction qui permet d'augmenter la tolérance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Opération booléenne avec Maillage... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Somme de Minkowski - + Perform Minkowski Appliquer une Somme de Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Fonction d'affinage de la forme - + Create Refine Shape Feature Créer une fonction d'affinage de la forme @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Supprimer les objets et leurs enfants - + Removes the selected objects and all children that are not referenced from other objects Supprime les objets sélectionnés et tous les enfants qui ne sont pas référencés par d'autres objets @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Remplacer l'objet - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Outils de pièces OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Outils OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm index ddbade9d43..178fe06097 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts index 1e310414ac..66f464939c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK - + Add 추가 - + Clear Clear - + as Mesh 메시 처럼 - + Add OpenSCAD Element OpenSCAD 요소 - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D - + Unable to explode %s Unable to explode %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull 선체 - + Perform Hull Perform Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski 민코프스키 - + Perform Minkowski 민코프스키 연산 @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Replace Object - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part tools @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD도구 diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.qm index a42d88a780..f1dbe7ef5c 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts index 3f08bca7d6..5b0809e0cd 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Versti kraštines į daugiakampius - + Please select 3 objects first Prašome pirma pasirinkti 3 kūnus - + Unsupported Function Nepalaikoma funkcija - + Press OK Paspauskite „Gerai“ - + Add Pridėti - + Clear Išvalyti - + as Mesh kaip tinklas - + Add OpenSCAD Element Pridėti OpenSCAD elementą - + Perform Atlikti - + Mesh Boolean Veiksmai su tinklais - + Error all shapes must be either 2D or both must be 3D Klaida. Visi kūnai turi būti arba tik dvimačiai, arba tik trimačiai - + Unable to explode %s Neįmanoma išskleisti %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Pridėti OpenSCAD elementą... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Pridėti OpenSCAD elementą įvedant OpenSCAD kodą ir įvykdžius OpenSCAD dvejetainį kodą @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Išskyrimas spalva - + Color Shapes by validity and type Nuspalvinti kūnus pagal tinkamumą ir rūšį @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Versti kraštines į daugiakampius @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Išplėsti išdėstymą - + Expand all placements downwards the FeatureTree Išskleisti visus gilesnius išdėstymus savybių medyje @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Išgrupuoti - + Remove fusion, apply placement to children, and color randomly Pašalinti sąlają, pritaikyti atsitiktinį pavaldžiųjų ir spalvų išdėstymą @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Kevalas - + Perform Hull Padaryti kiautą @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Padidinti leistiną dydžio nuokrypą - + Create Feature that allows to increase the tolerance Sukurti dydį, leidžiantį padidinti leidžiamojo nuokrypio vertę @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Veiksmai su tinklais... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Eksportuoti daiktus kaip tinklus ir naudoti OpenSCAD, kad loginiams veiksmams su jais atlikti @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkovskio metrika - + Perform Minkowski Atlikti Minkovskio metriką @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Patobulinti figūros pavidalą - + Create Refine Shape Feature Sukurti patobulintą pavidalą @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Panaikinti objektus ir pavaldžius jiems - + Removes the selected objects and all children that are not referenced from other objects Pašalina pažymėtus objektus ir visus pavaldžius jiems, kurie nesusieti su kitais objektais @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Pakeisti objektą - + Replace an object in the Feature Tree. Please select old, new, and parent object Pakeisti daiktą savybių medyje. Pasirinkite senus, naujus ir tėvinius daiktus + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD dalių įrankiai @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD įrankiai diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm index 5b2d78a0b4..3d1b55197a 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts index ebe0ee1fdb..ee1375e777 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Randen omzetten naar vlakken - + Please select 3 objects first Selecteer eerst 3 objecten - + Unsupported Function Niet-ondersteunde functie - + Press OK Druk op OK - + Add Toevoegen - + Clear Wissen - + as Mesh als net - + Add OpenSCAD Element Een OpenSCAD element toevoegen - + Perform Uitvoeren - + Mesh Boolean Meshboolean - + Error all shapes must be either 2D or both must be 3D Fout alle vormen moeten ofwel 2D zijn of beide moeten 3D zijn - + Unable to explode %s Kan %s niet ontleden @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD element toevoegen... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Voeg een OpenSCAD-element toe door de OpenSCAD-code in te voeren en het OpenSCAD-binaire uit te voeren @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Vormen inkleuren - + Color Shapes by validity and type Kleurvormen per geldigheid en type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Randen omzetten naar vlakken @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Plaatsingen uitvouwen - + Expand all placements downwards the FeatureTree Vouw alle plaatsingen neerwaarts in de onderdelenstructuur uit @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Ontleed groep - + Remove fusion, apply placement to children, and color randomly Verwijder fusie, pas plaatsing willekeurig toe op kinderen en kleur @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Romp - + Perform Hull Voer romp uit @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Verhoog tolerantiefunctie - + Create Feature that allows to increase the tolerance Maak functie die het mogelijk maakt om de tolerantie te verhogen @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Meshboolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Objecten als mazen exporteren en OpenSCAD gebruiken om een booleaanse bewerking uit te voeren @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Voer Minkowski uit @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Spiegel Draadframe Kenmerk... - + Create Mirror Mesh Feature Maak Spiegelbeeld Draadframe Kenmerk @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Verfijnde vormgevingsfunctie - + Create Refine Shape Feature Maak een functie voor de verfijnde vormgeving @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Objecten en hun kinderen verwijderen - + Removes the selected objects and all children that are not referenced from other objects Verwijdert de geselecteerde objecten en alle kinderen die niet uit andere objecten worden vermeld @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Voorwerp vervangen - + Replace an object in the Feature Tree. Please select old, new, and parent object Vervang een object in de onderdelenstructuur. Selecteer oud, nieuw en bovenliggende object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Onderdeel-gereedschap @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm index 264a6c37a5..28a0d7e5f2 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts index dd46e2a182..b520a73348 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK - + Add Legg til - + Clear Tøm - + as Mesh as Mesh - + Add OpenSCAD Element Legg til OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D - + Unable to explode %s Unable to explode %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Legg til OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Legg til et OpenSCAD-element ved å angi OpenSCAD kode og utføre OpenSCAD fil @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Skrog - + Perform Hull Perform Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Replace Object - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part tools @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm index 3710e1511d..184ca8155b 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index 79c4a6b620..df981a2b55 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Konwertuj krawędzie na ściany - + Please select 3 objects first Najpierw proszę wybrać 3 obiekty - + Unsupported Function Funkcja nieobsługiwana - + Press OK Naciśnij przycisk OK - + Add Dodaj - + Clear Wyczyść - + as Mesh jako Siatka (Mesh) - + Add OpenSCAD Element Dodaj element OpenSCAD - + Perform Wykonaj - + Mesh Boolean Boolean siatki - + Error all shapes must be either 2D or both must be 3D Błąd, wszystkie kształty muszą być albo 2d albo 3d - + Unable to explode %s Nie można rozstrzelić %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Dodaj element OpenSCAD ... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Dodaj element OpenSCAD wprowadzając i wykonując jego kod @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Kolor kształtów - + Color Shapes by validity and type Kolor kształtów poprzez ważność i typ @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Konwersja krawędzi do obszarów @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Rozwiń położenia - + Expand all placements downwards the FeatureTree Rozwiń wszystkie miejsca docelowe w dół drzewa funkcji @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Rozstrzel Grupę - + Remove fusion, apply placement to children, and color randomly Usuń połączenie, zastosuj umiejscowienie obiektów-dzieci i kolory losowo @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Powłoka - + Perform Hull Wykonaj kadłub @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Funkcja powiększenia tolerancji - + Create Feature that allows to increase the tolerance Tworzy Funkcję, która umożliwia zwiększenie tolerancji @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Boolean siatki... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Eksportuje obiekty jako siatki i używa OpenSCAD aby wykonać operację boolean @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Wykonaj Minkowskiego @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Odbij właściwości siatki... - + Create Mirror Mesh Feature Twórz właściwości siatki @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Udoskonalenie funkcji kształtu - + Create Refine Shape Feature Stwórz udoskonaloną funkcje kształtu @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Usuń obiekt wraz z jego potomkami - + Removes the selected objects and all children that are not referenced from other objects Usuwa wybrane obiekty wraz ze wszystkimi potomkami, do których nie odnoszą się inne obiekty @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Zastąp obiekt - + Replace an object in the Feature Tree. Please select old, new, and parent object Zmień obiekt w drzewie elementów. Wybierz stary, nowy i nadrzędny obiekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD narzędzia części @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Narzędzia OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm index 3b395dc803..e17c943223 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts index 822abd4613..b54b3ce80d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Converter arestas em faces - + Please select 3 objects first Por favor, selecione 3 objetos - + Unsupported Function Função não suportada - + Press OK Pressione OK - + Add Adicionar - + Clear Limpar - + as Mesh como malha - + Add OpenSCAD Element Adicionar um elemento OpenSCAD - + Perform Executar - + Mesh Boolean Booleano de malha - + Error all shapes must be either 2D or both must be 3D Erro: todas as formas devem ser 2D ou todas devem ser 3D - + Unable to explode %s Não é possível explodir %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Adicionar um elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adicionar um elemento OpenSCAD inserindo código OpenSCAD e executando o binário de OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colorir formas - + Color Shapes by validity and type Colorir as formas pelo tipo e validade @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converter arestas em faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandir placements - + Expand all placements downwards the FeatureTree Expandir todos os placements para baixo na árvore @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explodir grupo - + Remove fusion, apply placement to children, and color randomly Remover a fusão, aplicar localizador aos descendentes e cor aleatoriamente @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Casco - + Perform Hull Executar um casco @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Aumento de tolerância - + Create Feature that allows to increase the tolerance Cria um objeto que permite aumentar a tolerância @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Booleano de malha... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportar objetos como malhas e usar OpenSCAD para executar uma operação booliana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Executar Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refinamento de forma - + Create Refine Shape Feature Criar um objeto de refinamento de forma @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remover objetos e seus descendentes - + Removes the selected objects and all children that are not referenced from other objects Remove os objetos selecionados e todos os seus descendentes que não são referenciados por outros objetos @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Substituir um objeto - + Replace an object in the Feature Tree. Please select old, new, and parent object Substituir um objeto na árvore. Por favor, selecione o antigo, o novo e o objeto pai + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Ferramentas de peça OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm index 6b2473c6f0..a55845521f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts index 4c7968703e..55cb6cc3e5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Converter Arestas para Faces - + Please select 3 objects first Por favor, selecione primeiro 3 objetos - + Unsupported Function Função não Suportada - + Press OK Pressione OK - + Add Adicionar - + Clear Limpar - + as Mesh como malha (mesh) - + Add OpenSCAD Element Adicionar elemento OpenSCAD - + Perform Executar - + Mesh Boolean Malha booleana - + Error all shapes must be either 2D or both must be 3D Erro: todas as formas devem ser 2D ou todas devem ser 3D - + Unable to explode %s Não é possível explodir %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Adicionar elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adicionar um elemento de OpenSCAD inserindo código OpenSCAD e executando o aplicativo OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Formas de cor - + Color Shapes by validity and type Formas de cor pela validade e tipo @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converter arestas em faces @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandir posição - + Expand all placements downwards the FeatureTree Expandir todos os posicionamentos para baixo na árvore @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explodir grupo - + Remove fusion, apply placement to children, and color randomly Remover a fusão, aplicar posição aos descendentes e cor aleatoriamente @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Casca - + Perform Hull Executar casca @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Aumentar tolerância - + Create Feature that allows to increase the tolerance Criar um objeto que permita aumentar a tolerância @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malha Booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportar objetos como malhas e usar OpenSCAD para executar uma operação booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Executar Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refinar forma - + Create Refine Shape Feature Criar um objeto forma refinado @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remover objetos e seus dependentes - + Removes the selected objects and all children that are not referenced from other objects Remove os objetos selecionados e todos os dependentes que não são referenciadas por outros objetos @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Substituir objeto - + Replace an object in the Feature Tree. Please select old, new, and parent object Substituir um objeto na árvore de recursos. Por favor, selecione o antigo, o novo e o objeto pai + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Ferramentas de peça (part) OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm index ef56749180..3bffbf67f8 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts index e43befc63d..f7a52f6678 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Convertiti marginile in fete - + Please select 3 objects first Selectati mai intai 3 obiecte - + Unsupported Function Functia nu este suportata - + Press OK Apasati Ok - + Add Adaugă - + Clear Șterge - + as Mesh o retea - + Add OpenSCAD Element Adauga element OpenSCAD - + Perform Efectuează - + Mesh Boolean Plasă Boolean - + Error all shapes must be either 2D or both must be 3D Eroare toate formele trebuie să fie fie 2D sau ambele trebuie să fie 3D - + Unable to explode %s Nu se poate exploda %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Adauga element OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adauga u element OpenSCAD prin introducerea unui cod OpenSCAD si executarea codului binar @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Forme de culoare - + Color Shapes by validity and type Forme de culoare dupa validitate si tip @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Conversie margini in fete @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Amplasamente expandate - + Expand all placements downwards the FeatureTree Extinde toate amplasamentele mai jos de FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explodare grup - + Remove fusion, apply placement to children, and color randomly Scoateţi fusion, aplica plasarea copiilor şi culoare la întâmplare @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull carenă - + Perform Hull Efectuează Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Crește funcția toleranței - + Create Feature that allows to increase the tolerance Creează o funcție care permite creșterea toleranței @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Ochiurilor de plasă Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exporta obiectele ca plase şi de a folosi OpenSCAD pentru a efectua o operaţiune tip boolean @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Efectuează Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Rafineaza caracteristica de forma - + Create Refine Shape Feature Creaza rafinament de forma @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Elimina obiectele si copii lor - + Removes the selected objects and all children that are not referenced from other objects Elimina obiectele selectate si toti copiii care nu sunt referentiati de alte obiecte @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Inlocuieste obiectul - + Replace an object in the Feature Tree. Please select old, new, and parent object Inlocuieste un obiect in FeatureTree. Selectati obiectul vechi, cel nou si obiectul parinte + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Instrumente de OpenSCAD Part @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Unelte OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm index 846cd248c9..a0a99bcf1d 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts index 81257504a9..4a23c9648c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Преобразовать рёбра в грани - + Please select 3 objects first Сначала необходимо выбрать 3 объекта - + Unsupported Function Неподдерживаемая функция - + Press OK Нажмите кнопку OK - + Add Добавить - + Clear Очистить - + as Mesh как Полигональная сетка - + Add OpenSCAD Element Добавление элемента OpenSCAD - + Perform Выполнить - + Mesh Boolean Булевы операции с полигональными сетками - + Error all shapes must be either 2D or both must be 3D Ошибка: все фигуры должны быть из одного измерения. Либо все двумерные, либо все трёхмерные - + Unable to explode %s Не удалось разобрать %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Добавить элемент OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Добавить элемент OpenSCAD, введя код и выполнив исполняемый файл OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Выделение цветом - + Color Shapes by validity and type Раскрасить фигуры по корректности и типу @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Преобразовать грани в поверхности @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Развернуть - + Expand all placements downwards the FeatureTree Развернуть все элементы контейнеров геометрии в окне дерева элементов @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Разъединить Группу - + Remove fusion, apply placement to children, and color randomly Удалить слияние, случайным образом применить позиционное распределение и цвет к потомкам @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Оболочка - + Perform Hull Натянуть оболочку @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Элемент Увеличения допуска - + Create Feature that allows to increase the tolerance Создать элемент, позволяющий увеличить допуск @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Булевы операции с полигональными сетками... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Экспортировать объекты как полигональные сетки и использовать OpenSCAD, чтобы осуществить булеву операцию @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski метрика Минковского - + Perform Minkowski Осуществить метрику Минковского @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Элемент зеркальной сетки... - + Create Mirror Mesh Feature Создать Элемент зеркальной сетки @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Элемент закрепления фигуры - + Create Refine Shape Feature Создать элемент, закрепляющий форму фигуры @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Удалить объекты вместе с их потомками - + Removes the selected objects and all children that are not referenced from other objects Удаляет выбранные объекты и все дочерние, на которые нет ссылок из других объектов @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Заменить объект - + Replace an object in the Feature Tree. Please select old, new, and parent object Заменить объект в дереве элементов. Выберите, пожалуйста, старый, новый и родительский объект + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Инструменты OpenSCAD для детали @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Инструменты OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.qm index 24d61f2cc2..e09a89d8ed 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts index 4b0160d97c..22d1ef8647 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Previesť hrany na steny - + Please select 3 objects first Najprv vyberte 3 objekty - + Unsupported Function Nepodporovaná funkcia - + Press OK Stlačte OK - + Add Pridať - + Clear Vyčistiť - + as Mesh ako sieť - + Add OpenSCAD Element Pridať prvok OpenSCAD - + Perform Vykonať - + Mesh Boolean Booleovské operácie so sieťou - + Error all shapes must be either 2D or both must be 3D Chyba, všetky tvary musia byť buď 2D alebo 3D - + Unable to explode %s Nieje možné rozložiť %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Pridať prvok OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Pridať prvok OpenSCAD zadaním a spustením kódu OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Ofarbiť plochy - + Color Shapes by validity and type Ofarbiť plochy podľa platnosti a typu @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Prevod hrán na steny @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Rozbaliť umiestnenie - + Expand all placements downwards the FeatureTree Rozbaliť všetky umiestnenia v strome funkcií @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Rozložiť skupinu - + Remove fusion, apply placement to children, and color randomly Odstrániť zlúčenie, prevziať umiestnenie potomkov a náhodne ofarbiť @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Škrupina - + Perform Hull Vytvoriť škrupinu @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Zvýšiť toleranciu prvku - + Create Feature that allows to increase the tolerance Vytvoriť prvok, ktorý umožňuje zvýšiť toleranciu @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Booleovské operácie so sieťou... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportovať objekty ako siete a booleovskou operáciou previesť pomocou OpenSCAD @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowského operácia - + Perform Minkowski Vykonať Minkowského operáciu @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Vyčistenie tvarového prvku - + Create Refine Shape Feature Vytvoriť vyčistenie tvarového prvku @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Odstrániť objekty a ich potomkov - + Removes the selected objects and all children that are not referenced from other objects Odstrániť vybrané objekty a všetkých potomkov, na ktoré nieje odkaz z iných objektov @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Nahradiť objekt - + Replace an object in the Feature Tree. Please select old, new, and parent object Nahradenie objektu v strome funkcií. Vyberte prosím starý, nový a nadradený objekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Nástroje súčastí OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Nástroje OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm index 73f05f903f..5cc2766473 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts index ea0bfa7022..9feae1ca16 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts @@ -106,7 +106,7 @@ If this is checked, Features will claim their children in the tree view - Če je to označeno, si bodo značilnosti podredile svoje podrejene predmete v drevesnem pogledu + Če je to označeno, si bodo značilnosti podredile svoje podrejenike v drevesnem pogledu @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Pretvori robove v ploskve - + Please select 3 objects first Izberite najprej 3 predmete - + Unsupported Function Nepodprta zmožnost - + Press OK Pritisnite V redu - + Add Dodaj - + Clear Počisti - + as Mesh - kot ploskovje + kot mreža - + Add OpenSCAD Element Dodaj element OpenSCAD - + Perform Izvedi - + Mesh Boolean - Logična vred. ploskovja + Boolove operacije mreže - + Error all shapes must be either 2D or both must be 3D Napaka, vse oblike morajo biti 2D ali pa obe 3D - + Unable to explode %s Razbijanje %s ni mogoče @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Dodaj element OpenSCAD … - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Dodaj element OpenSCAD z vnosom kode OpenSCAD in zagonom OpenSCAD programa @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Obarvaj oblike - + Color Shapes by validity and type Obarvaj oblike glede na veljavnost in vrsto @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Pretvori robove v ploskve @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Razširi postavitve - + Expand all placements downwards the FeatureTree Razširi vse postavitve znotraj drevesa značilnosti @@ -242,25 +242,25 @@ OpenSCAD_ExplodeGroup - + Explode Group Razbij skupino - + Remove fusion, apply placement to children, and color randomly - Razveljavi zlitje, uporabi postavitev za podrejene predmete ter jih naključno obarvaj + Razveljavi zlitje, uporabi postavitev za podrejenike ter jih naključno obarvaj OpenSCAD_Hull - + Hull Lupina - + Perform Hull Izvedi trup @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Povečaj značilnost tolerance - + Create Feature that allows to increase the tolerance Ustvari zmožnost, ki omogoča povečanje dopustnega odstopanja @@ -281,25 +281,25 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... - Logična vrednost ploskovja … + Boolove operacije mreže... - + Export objects as meshes and use OpenSCAD to perform a boolean operation - Izvozi opredmete kot ploskovja in uporabi OpenSCAD za izvedbo logičnih operacij + Izvozi objekte kot mreže in uporabi OpenSCAD za izvedbo Boolovih operacij OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Izvedi Minkowski @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Zrcali mrežo... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Ustvari značilnost zrcaljenja mreže OpenSCAD_RefineShapeFeature - + Refine Shape Feature Izpopolni obliko - + Create Refine Shape Feature Ustvari značilnost izpopolnjene oblike @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Odstrani predmete in njihove podrejenike - + Removes the selected objects and all children that are not referenced from other objects Odstrani izbrane predmete in vse podrejenike, na katere se drugi objekti ne sklicujejo @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Zamenjaj predmet - + Replace an object in the Feature Tree. Please select old, new, and parent object Zamenjaj predmet v Drevesu značilnosti. Izberite stari, novi in nadrejeni predmet + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Orodja za dele OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Orodja OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm index 3be5d3b2cd..94f9ed2c5c 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts index 49585c82ec..d5ac4de270 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Претвори Рубове у Површи - + Please select 3 objects first Молимо, прво одаберите 3 објекта - + Unsupported Function Неподржана функција - + Press OK Притисните OK - + Add Додај - + Clear Обриши - + as Mesh као Мрежа - + Add OpenSCAD Element Додај OpenSCAD Елемент - + Perform Извршити - + Mesh Boolean Булова cа Мрежом - + Error all shapes must be either 2D or both must be 3D Грешка,cви облици морају бити 2D,или оба морају бити 3D - + Unable to explode %s Unable to explode %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Отвори OpenSCAD елемент... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Додај OpenSCAD елемент уношењем OpenSCAD кода и покретањем OpenSCAD бинарне датотеке @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Обоји Облике - + Color Shapes by validity and type Color Shapes by validity and type @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Претвори Рубове у Површи @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Труп - + Perform Hull Perform Hull @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Минковcки - + Perform Minkowski Perform Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Уклони Објекте и њихобве Потомке - + Removes the selected objects and all children that are not referenced from other objects Уклања одабране објекте и cве њихове потомке који ниcу референцирани од cтране других објеката @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Замени Објекат - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Part tools @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADАлати diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm index 48976910aa..c991eb26e0 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts index 55e804bea9..163255574d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Konvertera kanter till ytor - + Please select 3 objects first Vänligen välj tre objekt först - + Unsupported Function Funktionen stöds ej - + Press OK Tryck på 'Ok' - + Add Lägg till - + Clear Rensa - + as Mesh som nät - + Add OpenSCAD Element Lägg till OpenSCAD-element - + Perform Utför - + Mesh Boolean Nät-boolesk - + Error all shapes must be either 2D or both must be 3D Fel: alla former måste vara antingen 2D eller båda måste vara 3D - + Unable to explode %s Det går inte att lösa upp %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Lägg till OpenSCAD-element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Lägg till ett OpenSCAD-element genom att skriva in OpenSCAD-kod och köra OpenSCAD-programfilen @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Färglägg former - + Color Shapes by validity and type Färglägger former utifrån giltighet och typ @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Konvertera kanter till ytor @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandera placeringar - + Expand all placements downwards the FeatureTree Expandera alla placeringar nedåt i funktionsträdet @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Dela upp grupp - + Remove fusion, apply placement to children, and color randomly Ta bort fusion, applicera placering på underobjekt, och färg slumpmässigt @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Stomme - + Perform Hull Utför stomme @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Öka toleransfunktion - + Create Feature that allows to increase the tolerance Skapar en funktion som tillåter ökning av toleransen @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Nätboolesk - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exportera objekt som nät och använd OpenSCAD för att utföra booleska funktioner @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Utför Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Förfinad formfunktion - + Create Refine Shape Feature Skapar en förfinad formfunktion @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Ta bort objekt och dess underobjekt - + Removes the selected objects and all children that are not referenced from other objects Tar bort de valda objekten och alla dess underobjekt som inte refereras till av andra objekt @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Ersätt objekt - + Replace an object in the Feature Tree. Please select old, new, and parent object Ersätt ett objekt i Funktionsträdet. Vänligen välj gamla, nya och överordnade objekt + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD:s komponentverktyg @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD-verktyg diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm index 8a28a8fa1f..d486037591 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts index 97d194745e..5b26ccd0a5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Kenarları yüzlere dönüştür - + Please select 3 objects first Lütfen öncelikle 3 nesneyi seçin - + Unsupported Function Desteklenmeyen işlev - + Press OK OK (Tamam) tuşuna basın - + Add Ekle - + Clear Temizle - + as Mesh örgü gibi - + Add OpenSCAD Element OpenSCAD Elemanı Ekle - + Perform Uygula - + Mesh Boolean Örgü mantıksalı - + Error all shapes must be either 2D or both must be 3D Hata, tüm şekiller 2D olmalı veya her ikisi de 3D olmalı - + Unable to explode %s %s kadar patlatmaya yetmez @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD Elemanı Ekle... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary OpenSCAD kodunu girerek ve OpenSCAD ikili dosyasını çalıştırarak bir OpenSCAD öğesi ekleyin @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Renk Şekilleri - + Color Shapes by validity and type Geçerlik ve türe göre Renk Şekilleri @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Kenarları Yüzlere Dönüştür @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Yerleşimleri Genişlet - + Expand all placements downwards the FeatureTree Tüm yerleşimleri FeatureTree'yi aşağı doğru genişletin @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Grubu Parçala - + Remove fusion, apply placement to children, and color randomly Füzyonu kaldırın, yerleştirmeyi çocuklara uygulayın ve rasgele renklendirin @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Gövde - + Perform Hull Gövde Performansı @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Tolerans Özelliklerini Artırın - + Create Feature that allows to increase the tolerance Toleransı arttırmaya yarayan Özellik Yarat @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Örgü mantıksalı... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Nesneleri ağ olarak dışa aktarın ve bir Boolean işlemi gerçekleştirmek için OpenSCAD kullanın @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Minkowski gerçekleştir @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + Aynalama kafesi özelliği... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + Aynalama kafesi özelliği oluşturun OpenSCAD_RefineShapeFeature - + Refine Shape Feature Şekil Özelliklerini Ayrıntılandır - + Create Refine Shape Feature Şekil Özellik Ayrıntılandırması Oluştur @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Nesneleri ve Çocuklarını Kaldır - + Removes the selected objects and all children that are not referenced from other objects Seçili nesneleri ve diğer nesnelerden atıfta bulunulmayan tüm çocukları kaldırır @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Nesne Değiştir - + Replace an object in the Feature Tree. Please select old, new, and parent object Özellik Ağacında bir nesneyi değiştirin. Lütfen eski, yeni ve ana nesneyi seçin + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD Parça araçları @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCADAraçları diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm index 0c6106bc10..737fb34fd4 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts index 2470b0d95d..9e1a2314c7 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Перетворити ребра в грані - + Please select 3 objects first Будь ласка, оберіть спочатку 3 об'єкти - + Unsupported Function Непідтримувані функції - + Press OK Натисніть OK - + Add Додати - + Clear Очистити - + as Mesh як сітку - + Add OpenSCAD Element Додати елемент OpenSCAD - + Perform Виконати - + Mesh Boolean Логічна сітка - + Error all shapes must be either 2D or both must be 3D Помилка: усі обʼєкти повинні бути або дво-, або тривимірними - + Unable to explode %s Неможливо розбити %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Додати елемент OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Додати елемент OpenSCAD, ввівши код OpenSCAD і запустивши OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Колір фігур - + Color Shapes by validity and type Колір фігури залежно від терміну дії та типу @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Перетворити ребра в грані @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Розгорнути місця розташування - + Expand all placements downwards the FeatureTree Розгорнути всі місця розташування вниз на FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Розбити групу - + Remove fusion, apply placement to children, and color randomly Видалити злиття та випадково застосувати розташування та колір до дочірніх обʼєктів @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Корпус - + Perform Hull Сформувати корпус @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Збільшити точність - + Create Feature that allows to increase the tolerance Створити властивість, яка дозволить збільшити точність @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Логічна сітка... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Експортувати об'єкти у вигляді сітки та задіяти OpenSCAD для виконання логічних операцій @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski метрика Мінковського - + Perform Minkowski Задіяти метрику Мінковського @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Уточнити властивості фігури - + Create Refine Shape Feature Створити елемент, що уточнює форму @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Видалити об'єкти і їхніх нащадків - + Removes the selected objects and all children that are not referenced from other objects Видалити обраний та всі дочірні об'єкти, на які відсутні посилання з інших об'єктів @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Замінити об'єкт - + Replace an object in the Feature Tree. Please select old, new, and parent object Замінити об'єкт у дереві властивостей. Оберіть, будь ласка, старий, новий та породжуючий об'єкт + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Інструменти OpenSCAD для деталі @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Інструменти OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.qm index c0f79e2151..0d36efb4a8 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts index adda1084cc..e964888cb3 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Converteix arestes en cares - + Please select 3 objects first Seleccioneu 3 objectes primer - + Unsupported Function Funció no admesa - + Press OK Premeu D'acord - + Add Afegir - + Clear Neteja - + as Mesh com a malla - + Add OpenSCAD Element Afig un element OpenSCAD - + Perform Realitza - + Mesh Boolean Malla booleana - + Error all shapes must be either 2D or both must be 3D Error: totes les formes han de ser 2D o bé les dues han de ser 3D - + Unable to explode %s No s'ha pogut descompondre %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Afig un element OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Afig un element OpenSCAD introduint el codi d'OpenSCAD i executant el binari d'OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color de les formes - + Color Shapes by validity and type Acoloreix les formes per validesa i tipus @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converteix arestes en cares @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandeix les posicions - + Expand all placements downwards the FeatureTree Expandeix totes les posicions cap avall en l'Arbre de funcionalitats @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Descompon el grup - + Remove fusion, apply placement to children, and color randomly Elimina una fusió, aplica un posicionament als fills i dona un color aleatori @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Buc/closca - + Perform Hull Realitza un buc @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Augmenta la funció de tolerància - + Create Feature that allows to increase the tolerance Crea la funció que permet l'increment de la tolerància @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malla booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Exporta objectes com a malles i utilitza l'OpenSCAD per a dur a terme una operació booleana @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Suma de Minkowski - + Perform Minkowski Realitza una suma de Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Funció de refinament de la forma - + Create Refine Shape Feature Crea una funció de refinament de la forma @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Elimina objectes i els seus fills - + Removes the selected objects and all children that are not referenced from other objects Elimina els objectes seleccionats i tots els fills que no són referenciats per altres objectes @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Reemplaça l'objecte - + Replace an object in the Feature Tree. Please select old, new, and parent object Reemplaça un objecte en l'arbre de funcions. Seleccioneu l'objecte antic, el nou i el pare + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Eines de peces d'OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Eines d'OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.qm index 7c41cc1d2d..cf2ae4f987 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts index 79796a568f..083fdefae1 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces Chuyển đổi các cạnh sang bề mặt - + Please select 3 objects first Hãy chọn 3 đối tượng trước - + Unsupported Function Chức năng không được hỗ trợ - + Press OK Nhấn OK - + Add Thêm mới - + Clear Xóa - + as Mesh như lưới - + Add OpenSCAD Element Thêm phần tử OpenSCAD - + Perform Thực hiện - + Mesh Boolean Lưới Boolean - + Error all shapes must be either 2D or both must be 3D Lỗi tất cả các hình dạng phải là 2D hoặc cả hai phải là 3D - + Unable to explode %s Không thể kéo dài thêm %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Thêm phần tử OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Thêm một phần tử OpenSCAD bằng cách nhập mã OpenSCAD và thực thi nhị phân OpenSCAD @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Hình dạng màu sắc - + Color Shapes by validity and type Phân loại hình dạng màu theo giá trị và kiểu @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Chuyển đổi các cạnh sang thành mặt @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Mở rộng vị trí - + Expand all placements downwards the FeatureTree Mở rộng tất cả các vị trí xuống dưới FeatureTree @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Nhóm tháo rời - + Remove fusion, apply placement to children, and color randomly Loại bỏ sáp nhập, áp dụng vị trí cho sản phẩm và tô màu một cách ngẫu nhiên @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull Vỏ bọc - + Perform Hull Xây dựng Vỏ bọc @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Tính năng tăng dung sai - + Create Feature that allows to increase the tolerance Tạo tính năng cho phép tăng dung sai @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Lưới Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Xuất các đối tượng dưới dạng lưới và sử dụng OpenSCAD để thực hiện thao tác boolean @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Thực hiện Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Tính năng tinh chỉnh hình dạng - + Create Refine Shape Feature Tạo tính năng tinh chỉnh hình dạng @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Loại bỏ các đối tượng và sản phẩm của chúng - + Removes the selected objects and all children that are not referenced from other objects Loại bỏ các đối tượng đã chọn và tất cả sản phẩm không được tham chiếu từ các đối tượng khác @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object Thay thế đối tượng - + Replace an object in the Feature Tree. Please select old, new, and parent object Thay thế một đối tượng trong cây tính năng. Vui lòng chọn đối tượng cũ, mới và gốc + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools Công cụ phần OpenSCAD @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools Công cụ OpenSCAD diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm index f35e6342e5..429c3c44c0 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts index 55c6eaaa27..5ea98a070f 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces 转换边缘为面 - + Please select 3 objects first 请先选择三个对象 - + Unsupported Function 不支持的功能 - + Press OK 按确定 - + Add 添加 - + Clear 清除 - + as Mesh 当作网格 - + Add OpenSCAD Element 添加 OpenSCAD 元素 - + Perform 执行 - + Mesh Boolean 网格布林计算 - + Error all shapes must be either 2D or both must be 3D 错误：所有形状必须是 2D 或两者必须都是 3D - + Unable to explode %s 无法分解 %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... 添加 OpenSCAD 元素... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary 通过输入 OpenSCAD 代码和执行 OpenSCAD 程序添加 OpenSCAD 元素 @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes 形状着色 - + Color Shapes by validity and type 按有效性和类型给形状着色 @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces 转换边缘为面 @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements 扩大安置 - + Expand all placements downwards the FeatureTree 扩大功能树下方配置 @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group 拆解群组 - + Remove fusion, apply placement to children, and color randomly 移除合并，随机分配子项位置及色彩 @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull 壳体 - + Perform Hull 执行壳体 @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature 提高容差特征 - + Create Feature that allows to increase the tolerance 建立允许提高容差的特征 @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... 网格布尔运算... - + Export objects as meshes and use OpenSCAD to perform a boolean operation 将对象导出为网格, 并使用 OpenSCAD 执行布尔运算 @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski 执行 Minkowski @@ -307,25 +307,25 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... - Mirror Mesh Feature... + 镜像网格特征... - + Create Mirror Mesh Feature - Create Mirror Mesh Feature + 创建镜像网格特征 OpenSCAD_RefineShapeFeature - + Refine Shape Feature 细化形状特征 - + Create Refine Shape Feature 创建细化形体特征 @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children 删除对象及其子对象 - + Removes the selected objects and all children that are not referenced from other objects 移除所选对象及所有与其他对象无关的子对象 @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object 替换对象 - + Replace an object in the Feature Tree. Please select old, new, and parent object 替换特征树中的对象。请选择原始对象、新对象和父节点对象 + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD 零件工具 @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD 工具 diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm index fefc1440f5..667fdf1588 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts index f1dee8d2bf..314c6c5f87 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts @@ -132,62 +132,62 @@ OpenSCAD - + Convert Edges to Faces 轉換邊為面 - + Please select 3 objects first 請先選擇3個物件 - + Unsupported Function 此功能未支援 - + Press OK 按確定 - + Add 新增 - + Clear 清除 - + as Mesh 當作網格 - + Add OpenSCAD Element 加入OpenSCAD元素 - + Perform 執行 - + Mesh Boolean 網格布林運算 - + Error all shapes must be either 2D or both must be 3D 錯誤，所有造型必須是2D或都是3D - + Unable to explode %s 無法拆解 %s @@ -195,12 +195,12 @@ OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... 加入OpenSCAD元素... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary 藉由輸入OpenSCAD語言並執行OpenSCAD程式加入OpenSCAD元素 @@ -208,12 +208,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes 對造型上色 - + Color Shapes by validity and type 依有效性及類型對造型上色 @@ -221,7 +221,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces 轉換邊為面 @@ -229,12 +229,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements 擴大配置 - + Expand all placements downwards the FeatureTree 擴大功能樹下方配置 @@ -242,12 +242,12 @@ OpenSCAD_ExplodeGroup - + Explode Group 拆解群組 - + Remove fusion, apply placement to children, and color randomly Remove fusion, apply placement to children, and color randomly @@ -255,12 +255,12 @@ OpenSCAD_Hull - + Hull 殼體 - + Perform Hull 執行殼體 @@ -268,12 +268,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature 提升容忍度特徵 - + Create Feature that allows to increase the tolerance 建立允許增加容忍度之特徵 @@ -281,12 +281,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... 網格布林運算... - + Export objects as meshes and use OpenSCAD to perform a boolean operation Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -294,12 +294,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski 執行 Minkowski @@ -307,12 +307,12 @@ OpenSCAD_MirrorMeshFeature - + Mirror Mesh Feature... Mirror Mesh Feature... - + Create Mirror Mesh Feature Create Mirror Mesh Feature @@ -320,12 +320,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature 調整造型功能 - + Create Refine Shape Feature 建立調整造型功能 @@ -333,12 +333,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children 移除物件及其子物件 - + Removes the selected objects and all children that are not referenced from other objects 移除所選物件及其所有未被其他物件所參考之子物件 @@ -346,20 +346,46 @@ OpenSCAD_ReplaceObject - + Replace Object 替換物件 - + Replace an object in the Feature Tree. Please select old, new, and parent object Replace an object in the Feature Tree. Please select old, new, and parent object + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + Workbech - + OpenSCAD Part tools OpenSCAD 零件工具 @@ -367,7 +393,7 @@ Workbench - + OpenSCADTools OpenSCAD工具 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.qm b/src/Mod/Part/Gui/Resources/translations/Part_af.qm index cedb01e02d..29dd13da85 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_af.qm and b/src/Mod/Part/Gui/Resources/translations/Part_af.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.ts b/src/Mod/Part/Gui/Resources/translations/Part_af.ts index 6558f1a398..486ac10ec4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_af.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_af.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ar.qm b/src/Mod/Part/Gui/Resources/translations/Part_ar.qm index 6cd6e5a8a8..f47da7f14a 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ar.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ar.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts index b6efac20ee..7ff0420522 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm index 817d205428..ab641d5ad5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ca.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ca.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 153f80368a..eb2ed2ab8e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -271,19 +271,6 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Seleccioneu l'objecte en què realitzar un retall, després l'objecte que ha d'encabir-se en el retall i apliqueu aquesta eina. - - Part_MakeTube - - - Create tube - Crea un lloc - - - - Creates a tube - Crea un tub - - Part_SplitFeatures @@ -360,6 +347,32 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Elimina els fragments d'intersecció + + Part_Tube + + + Create tube + Crea un lloc + + + + Creates a tube + Crea un tub + + + + Part_MakeTube + + + Create tube + Crea un lloc + + + + Creates a tube + Crea un tub + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm index 33950ce4ac..aa7a62eb1a 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm and b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index ee69cc9048..54969b9173 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -271,19 +271,6 @@ Klikněte 'Pokračovat' chcete-li přesto prvek vytvořit, nebo "Přerušit" pro Vyberte objekt, ve kterém má být výřez, pak objekt, který má odpovídat výřezu, a nakonec použijte tento nástroj. - - Part_MakeTube - - - Create tube - Vytvořit trubku - - - - Creates a tube - Vytvoří trubku - - Part_SplitFeatures @@ -360,6 +347,32 @@ Klikněte 'Pokračovat' chcete-li přesto prvek vytvořit, nebo "Přerušit" pro Odstranit fragmenty průniků + + Part_Tube + + + Create tube + Vytvořit trubku + + + + Creates a tube + Vytvoří trubku + + + + Part_MakeTube + + + Create tube + Vytvořit trubku + + + + Creates a tube + Vytvoří trubku + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.qm b/src/Mod/Part/Gui/Resources/translations/Part_de.qm index 4001de5ad3..f2e5fbb74f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_de.qm and b/src/Mod/Part/Gui/Resources/translations/Part_de.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index ecf005715c..154fb4482e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -271,19 +271,6 @@ klicken Sie auf "Weiter", um das Element trotzdem zu erstellen, oder "Abbrechen" Wählen Sie zuerst das Objekt aus, in dem ein Ausschnitt erstellt werden soll. Danach das Objekt zu welchem der Ausschnitt passen soll, und rufen Sie zum Schluss dieses Werkzeug auf. - - Part_MakeTube - - - Create tube - Erstelle eine Röhre - - - - Creates a tube - Erstellt eine Röhre - - Part_SplitFeatures @@ -360,6 +347,32 @@ klicken Sie auf "Weiter", um das Element trotzdem zu erstellen, oder "Abbrechen" Entferne Verschneidungsbruchstücke + + Part_Tube + + + Create tube + Erstelle eine Röhre + + + + Creates a tube + Erstellt eine Röhre + + + + Part_MakeTube + + + Create tube + Erstelle eine Röhre + + + + Creates a tube + Erstellt eine Röhre + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.qm b/src/Mod/Part/Gui/Resources/translations/Part_el.qm index b184bc044b..d251f326c5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_el.qm and b/src/Mod/Part/Gui/Resources/translations/Part_el.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 50133b7587..1559f9e2b0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm index d380ad5524..939d8425a5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index fc2fb539d0..255d0b49d9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -271,19 +271,6 @@ Haga clic en 'Continuar' para crear la operación de todos modos, o 'Abortar' pa Seleccione el objeto para hacer un recorte, luego el objeto que debe encajar en el recorte, e invoque esta herramienta. - - Part_MakeTube - - - Create tube - Crear un tubo - - - - Creates a tube - Crea un tubo - - Part_SplitFeatures @@ -360,6 +347,32 @@ Haga clic en 'Continuar' para crear la operación de todos modos, o 'Abortar' pa Eliminar fragmentos de intersección + + Part_Tube + + + Create tube + Crear un tubo + + + + Creates a tube + Crea un tubo + + + + Part_MakeTube + + + Create tube + Crear un tubo + + + + Creates a tube + Crea un tubo + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm index 2c4e5f0701..131d24ad6b 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 3a62681570..1be62d2881 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -271,19 +271,6 @@ Egin klik 'Jarraitu' aukeran eginbidea sortzeko, edo 'Abortatu' bertan behera uz Hautatu inausiko den objektua, ondoren inausitakoan doituko den objektua, eta aplikatu tresna hau. - - Part_MakeTube - - - Create tube - Sortu tutua - - - - Creates a tube - Tutu bat sortzen du - - Part_SplitFeatures @@ -360,6 +347,32 @@ Sakatu 'Jarraitu' elementua sortzeko, edo 'Abortatu' eragiketa uzteko.Kendu ebakidura-zatiak + + Part_Tube + + + Create tube + Sortu tutua + + + + Creates a tube + Tutu bat sortzen du + + + + Part_MakeTube + + + Create tube + Sortu tutua + + + + Creates a tube + Tutu bat sortzen du + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm index 9818c56910..af35808bba 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 1943a4711e..8f0214a300 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Luo putki - - - - Creates a tube - Luo putken - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Luo putki + + + + Creates a tube + Luo putken + + + + Part_MakeTube + + + Create tube + Luo putki + + + + Creates a tube + Luo putken + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.qm b/src/Mod/Part/Gui/Resources/translations/Part_fil.qm index 99b4b38093..75931bc819 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fil.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fil.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts index 88d0f74247..ca49039cc7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm index 3fef4828ad..dd403f4955 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 8aeb2f4aa7..e44087d636 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -271,19 +271,6 @@ Cliquez sur 'Continuer' pour créer la fonctionnalité quand même, ou 'Abandonn Sélectionnez l'objet dans lequel effectuer une découpe, puis l'objet à insérer dans la découpe et lancez cet outil. - - Part_MakeTube - - - Create tube - Créer un tube - - - - Creates a tube - Crée un tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Cliquez sur « Continuer » pour créer la fonction de toute façon, ou « An Supprimer les fragments d'intersection + + Part_Tube + + + Create tube + Créer un tube + + + + Creates a tube + Crée un tube + + + + Part_MakeTube + + + Create tube + Créer un tube + + + + Creates a tube + Crée un tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.qm b/src/Mod/Part/Gui/Resources/translations/Part_gl.qm index 61334ac0d0..8cab829e7e 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_gl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_gl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 35950d4a7f..144eb72d00 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Escolma o obxecto para facer un corte, logo o obxecto que debe encaixar no recorte, e invoque esta ferramenta. - - Part_MakeTube - - - Create tube - Crear unha tubaría - - - - Creates a tube - Crear unha tubaría - - Part_SplitFeatures @@ -360,6 +347,32 @@ Fai Click en 'Continar' para crear a característica de tódolos xeitos ou 'Abor Borra anacos de interseccións + + Part_Tube + + + Create tube + Crear unha tubaría + + + + Creates a tube + Crear unha tubaría + + + + Part_MakeTube + + + Create tube + Crear unha tubaría + + + + Creates a tube + Crear unha tubaría + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm index 2a99485f7b..9aeb648950 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 65e7528037..e376921083 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -271,19 +271,6 @@ Kliknite na 'Nastavi' za stvaranja svojstava svejedno, ili "Odustani" za odustaj Odaberite objekt na kojem želite napraviti izrez, zatim objekt koji treba stati u izrez i pozovite ovaj alat. - - Part_MakeTube - - - Create tube - Napravi cijev - - - - Creates a tube - Napravi cijev - - Part_SplitFeatures @@ -360,6 +347,32 @@ Kliknite na 'Nastavi' za stvaranja svojstava svejedno, ili "Odustani" za odustaj Ukloni fragmente razdjeljivanja + + Part_Tube + + + Create tube + Napravi cijev + + + + Creates a tube + Napravi cijev + + + + Part_MakeTube + + + Create tube + Napravi cijev + + + + Creates a tube + Napravi cijev + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm index e0691c799b..c0efd407d7 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 60e71b7226..6a146e3a2f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -161,11 +161,11 @@ kattintson "Folytatás" gombra, hogy mindenképp létrehozza a funkciót, vagy a {errstr} Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + Az eredmény kiszámítása hibába ütközött: {errstr} -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +Kattintson a “Folytatás” gombra hogy a hiba ellenére létrehozza a funkciót, vagy a “Megszakítás” gombra hogy visszalépjen. @@ -271,19 +271,6 @@ kattintson "Folytatás" gombra, hogy mindenképp létrehozza a funkciót, vagy a Kimetszésre szánt objektum kijelölése, majd a kimetszésre beilleszteni kívánt objektumot, és használja ezt az eszközt. - - Part_MakeTube - - - Create tube - Cső létrehozása - - - - Creates a tube - Cső létrehozása - - Part_SplitFeatures @@ -360,6 +347,32 @@ kattintson "Folytatás" gombra, hogy mindenképp létrehozza a funkciót, vagy a Kereszteződési töredékek törlése + + Part_Tube + + + Create tube + Cső létrehozása + + + + Creates a tube + Cső létrehozása + + + + Part_MakeTube + + + Create tube + Cső létrehozása + + + + Creates a tube + Cső létrehozása + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.qm b/src/Mod/Part/Gui/Resources/translations/Part_id.qm index 5544e3fb56..ed63cfb969 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_id.qm and b/src/Mod/Part/Gui/Resources/translations/Part_id.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index 341a3ac04e..46ed3462ba 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.qm b/src/Mod/Part/Gui/Resources/translations/Part_it.qm index dfacd34a32..f51e9f5cf1 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_it.qm and b/src/Mod/Part/Gui/Resources/translations/Part_it.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index a819d658c0..e8ddb2ff25 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -271,19 +271,6 @@ fare clic su 'Continua' per creare comunque la funzione, o 'Annulla' per annulla Selezionare l'oggetto in cui inserire un ritaglio, quindi l'oggetto che deve inserirsi nel ritaglio e poi invocare questo strumento. - - Part_MakeTube - - - Create tube - Crea un tubo - - - - Creates a tube - Crea un tubo - - Part_SplitFeatures @@ -360,6 +347,32 @@ fare clic su 'Continua' per creare comunque la funzione, o 'Annulla' per annulla Rimuovi i frammenti intersezione + + Part_Tube + + + Create tube + Crea un tubo + + + + Creates a tube + Crea un tubo + + + + Part_MakeTube + + + Create tube + Crea un tubo + + + + Creates a tube + Crea un tubo + + Attacher @@ -1531,7 +1544,7 @@ fare clic su 'Continua' per creare comunque la funzione, o 'Annulla' per annulla Check Geometry - Controlla geometria + Controlla la geometria @@ -4489,7 +4502,7 @@ Selezionare prima uno o più spigoli. Check Geometry - Controlla geometria + Controlla la geometria @@ -4525,7 +4538,7 @@ Selezionare prima uno o più spigoli. Set to default - Imposta al valore predefinito + Imposta il valore predefinito diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm index 11b325eafd..d285ed8cd7 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 4a53fe423f..d80027ca1b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. 切り抜きを行うオブジェクトを選択し、さらに切り抜きに一致すべきオブジェクトを選択してこのツールを呼び出してください。 - - Part_MakeTube - - - Create tube - チューブを作成 - - - - Creates a tube - チューブを作成 - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. 交差する断片を取り除く + + Part_Tube + + + Create tube + チューブを作成 + + + + Creates a tube + チューブを作成 + + + + Part_MakeTube + + + Create tube + チューブを作成 + + + + Creates a tube + チューブを作成 + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_kab.qm b/src/Mod/Part/Gui/Resources/translations/Part_kab.qm index f287818d28..212ba35d2f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_kab.qm and b/src/Mod/Part/Gui/Resources/translations/Part_kab.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts index 0e555affc9..e576d7b64e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm index fc1e9db494..9e485859fc 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index cb94d15990..c3e1588e1f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -16,7 +16,7 @@ Object {name} is neither movable nor attachable, can't edit attachment - Object {name} is neither movable nor attachable, can't edit attachment + 물체 {name} 은 움직일수도 없고 붙일수도 없다, 붙임 수정 불가능 @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm index 314325eddc..3e66b02c67 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm and b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index 61784a9336..1fbae6f520 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher @@ -3444,13 +3457,13 @@ Please check one or more edge entities first. Helix - Helix + Sraigtas Spiral - Spiralė + Įvija diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm index 8949fdff60..2b1d54994f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 3ded10c91f..fca5b1226e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -271,19 +271,6 @@ Klik op 'Doorgaan' om de functie toch te maken, of op 'Afbreken' als u wilt annu Selecteer het object waar u de uitsparing in wil maken, vervolgens het object dat in de uitsparing moet passen, en activeer dit hulpprogramma. - - Part_MakeTube - - - Create tube - Buis aanmaken - - - - Creates a tube - Maakt een Buis - - Part_SplitFeatures @@ -360,6 +347,32 @@ Klik op 'Doorgaan' om de functie toch te maken, of op 'Afbreken' als u wilt annu Verwijder fragmenten van snijpunten + + Part_Tube + + + Create tube + Buis aanmaken + + + + Creates a tube + Maakt een Buis + + + + Part_MakeTube + + + Create tube + Buis aanmaken + + + + Creates a tube + Maakt een Buis + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.qm b/src/Mod/Part/Gui/Resources/translations/Part_no.qm index 997f682830..8ba617959b 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_no.qm and b/src/Mod/Part/Gui/Resources/translations/Part_no.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.ts b/src/Mod/Part/Gui/Resources/translations/Part_no.ts index d56824e398..5180ba4b21 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_no.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_no.ts @@ -31,7 +31,7 @@ Continue - Continue + Fortsett @@ -253,7 +253,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Continue - Continue + Fortsett @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -307,7 +294,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Continue - Continue + Fortsett @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher @@ -776,7 +789,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Tangent to surface (V) AttachmentLine mode caption - Tangent to surface (V) + Tangent til overflate (V) @@ -941,7 +954,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Tangent to surface AttachmentPlane mode caption - Tangent to surface + Tangent til overflate @@ -3108,7 +3121,7 @@ Please check one or more edge entities first. Import - Import + Importer @@ -3201,7 +3214,7 @@ Please check one or more edge entities first. Import - Import + Importer @@ -3465,7 +3478,7 @@ Please check one or more edge entities first. Point - Point + Punkt @@ -4028,7 +4041,7 @@ Please check one or more edge entities first. Do you really want to cancel? - Do you really want to cancel? + Vil du virkelig avbryte? @@ -4972,17 +4985,17 @@ Do you want to continue? No Curve On Surface - No Curve On Surface + Ingen kurve på overflaten Invalid Curve On Surface - Invalid Curve On Surface + Ugyldig Kurve på overflaten Invalid Curve On Closed Surface - Invalid Curve On Closed Surface + Ugyldig Curve på lukket overflate @@ -5032,7 +5045,7 @@ Do you want to continue? No Surface - No Surface + Ingen Overflate diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index 0df7b2546c..9908a4aafc 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 9b9d131e8a..5ff7eb7d7d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -161,11 +161,11 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab {errstr} Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + Obliczenie wyniku zakończyło się błędem: {errstr} -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +Kliknij "Kontynuuj", aby i tak utworzyć element, lub "Przerwij", aby anulować. @@ -201,7 +201,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Fuses objects, taking care to preserve voids. - Fuses objects, taking care to preserve voids. + Łączy obiekty, dbając o zachowanie pustych przestrzeni. @@ -222,12 +222,12 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Embed object - Embed object + Osadź obiekt Fuses one object into another, taking care to preserve voids. - Fuses one object into another, taking care to preserve voids. + Łączy jeden obiekt z drugim, dbając o zachowanie pustych przestrzeni. @@ -239,11 +239,11 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + Obliczenie wyniku zakończyło się błędem: {err} - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +Kliknij "Kontynuuj", aby i tak utworzyć element, lub "Przerwij", aby anulować. @@ -258,12 +258,12 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Select at least two objects, or one or more compounds, first! - Select at least two objects, or one or more compounds, first! + Wybierz co najmniej dwa obiekty, lub najpierw jeden lub więcej komponentów! Select base object, then the object to embed, and invoke this tool. - Select base object, then the object to embed, and invoke this tool. + Wybierz obiekt główny, a następnie obiekt do osadzenia i uruchom to narzędzie. @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Utwórz rurę - - - - Creates a tube - Utwórz rurę - - Part_SplitFeatures @@ -327,7 +314,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Slice to compound - Slice to compound + Krojenie na kształty złożone @@ -357,7 +344,33 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Remove intersection fragments - Remove intersection fragments + Usuń fragmenty przecięcia + + + + Part_Tube + + + Create tube + Utwórz rurę + + + + Creates a tube + Utwórz rurę + + + + Part_MakeTube + + + Create tube + Utwórz rurę + + + + Creates a tube + Utwórz rurę @@ -1212,13 +1225,13 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab XY plane by 3 points Attachment3D mode caption - Płaszczyzna XY przez 3 punkty + Płaszczyzna XY wyznaczona przez 3 punkty Align XY plane to pass through three vertices. Attachment3D mode tooltip - Wyrównaj płaszczyznę XY do przejścia przez trzy wierzchołki. + Wyrównaj płaszczyznę XY by przechodziła przez trzy wierzchołki. @@ -1407,7 +1420,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Type: - Typ: + Rodzaj: @@ -1518,7 +1531,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Box selection - Pole wyboru + Zaznacz obszar @@ -1694,7 +1707,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Create a box solid without dialog - Tworzenie pola bryły bez okna dialogowego + Utwórz bryłę prostokątną bez użycia okna dialogowego @@ -1712,7 +1725,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Create a box solid without dialog - Tworzenie pola bryły bez okna dialogowego + Utwórz bryłę prostokątną bez użycia okna dialogowego @@ -1748,7 +1761,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Chamfer the selected edges of a shape - Sfazuj wybrane krawędzie obiektu + Fazowanie zaznaczonych krawędzi kształtu @@ -1779,12 +1792,12 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Counpound tools - Counpound tools + Narzędzia złożeń Compound tools: working with lists of shapes. - Compound tools: working with lists of shapes. + Narzędzia złożeń: praca z listami kształtów. @@ -1945,7 +1958,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Defeaturing - Defeaturing + Pogorszenie @@ -2071,12 +2084,12 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Loft... - Wyciągnij... + Wyciągnij po profilach... Utility to loft - Narzędzie wyciągania + Narzędzie wyciągnięcia po profilach @@ -2112,7 +2125,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Create solid from a shell or compound - Tworzenie brył z powłoki shell lub z kombinacji + Stwórz bryłę z powłoki lub złożenia @@ -2148,7 +2161,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Utility to offset in 3D - Utility to offset in 3D + Narzędzie tworzące odsunięcie w przestrzeni 3D @@ -2166,7 +2179,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Utility to offset planar shapes - Utility to offset planar shapes + Narzędzie do odsuwania płaskich kształtów @@ -2871,9 +2884,7 @@ Kliknij przycisk "Kontynuuj", aby mimo to utworzyć funkcję, lub "Przerwij", ab Extrusion direction link is invalid. %1 - Extrusion direction link is invalid. - -%1 + Odniesienie kierunek wytłaczania jest nieprawidłowe @@ -3804,7 +3815,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Select a shape for revolution, first. - Select a shape for revolution, first. + Najpierw wybierz kształt do przekształcenia przez obrót. @@ -3921,7 +3932,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Automatically refine model after sketch-based operation - Automatycznie oczyść model po operacji z użyciem szkicu + Automatycznie udoskonalaj model po operacji opartej na szkicu @@ -4071,7 +4082,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. At least two vertices, edges, wires or faces are required. - Wymagane są co najmniej dwa wierzchołki, krawędzie, linie lub płaszczyzny. + Wymagane są co najmniej dwa wierzchołki, krawędzie, linie lub powierzchnie. @@ -4081,12 +4092,12 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Vertex/Edge/Wire/Face - Wierzchołek/Krawędź/Linia/Płaszczyzna + Wierzchołek/Krawędź/Linia/Powierzchnia Loft - Poszycie + Wyciągnij po profilach @@ -4538,7 +4549,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Box selection - Pole wyboru + Zaznacz obszar @@ -4546,7 +4557,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Loft - Poszycie + Wyciągnięcie po profilach @@ -4690,7 +4701,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Wire from edges - Wire from edges + Linia łamana z krawędzi @@ -5283,7 +5294,7 @@ Do you want to continue? Primitives - Prymitywy + Bryła pierwotna diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm index 994dfa9f22..d378633eb5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 904bd9b7cd..61334d5d32 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Selecione o objeto para fazer um recorte, depois o objeto que deve ajustar-se no recorte e ative esta ferramenta. - - Part_MakeTube - - - Create tube - Cria um tubo - - - - Creates a tube - Cria um tubo - - Part_SplitFeatures @@ -360,6 +347,32 @@ clique em "Continuar" para criar o objeto de qualquer maneira, ou "Abortar" para Remove os fragmentos da intersecção + + Part_Tube + + + Create tube + Cria um tubo + + + + Creates a tube + Cria um tubo + + + + Part_MakeTube + + + Create tube + Cria um tubo + + + + Creates a tube + Cria um tubo + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm index 17e47b3272..8873c75fdb 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 1418859d20..26d19744b8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Selecione o objeto para fazer um recorte, depois o objeto que deve ajustar-se no recorte e ative esta ferramenta. - - Part_MakeTube - - - Create tube - Criar tubo - - - - Creates a tube - Cria um tubo - - Part_SplitFeatures @@ -360,6 +347,32 @@ clique em 'Continuar' para criar o objeto de qualquer maneira, ou 'Abortar' para Remove os fragmentos da interseção + + Part_Tube + + + Create tube + Criar tubo + + + + Creates a tube + Cria um tubo + + + + Part_MakeTube + + + Create tube + Criar tubo + + + + Creates a tube + Cria um tubo + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm index ea6fbf9886..8e6bb4d7b6 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 2936ea00c1..f8397a6cb8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -271,19 +271,6 @@ faceţi clic pe "Continuaţi" pentru a crea funcţia oricum, sau 'Abandonați' p Selectează obiectul pentru a face decuparea în el, apoi obiectul care trebuie potrivit în decupare, și apelează acest instrument. - - Part_MakeTube - - - Create tube - Creare tub - - - - Creates a tube - Creați un tub - - Part_SplitFeatures @@ -360,6 +347,32 @@ faceţi clic pe "Continuaţi" pentru a crea funcţia oricum, sau 'Abandonați' p Suprimați fragmentele de itnersecție + + Part_Tube + + + Create tube + Creare tub + + + + Creates a tube + Creați un tub + + + + Part_MakeTube + + + Create tube + Creare tub + + + + Creates a tube + Creați un tub + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm index 60cc9d8ebf..96bc94f035 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 0f0cc414d8..ff4003fec0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Выберите объект, в котором требуется сделать вырез, потом объект, который должен быть вырезан и запустите этот инструмент. - - Part_MakeTube - - - Create tube - Создать трубу - - - - Creates a tube - Создать трубу - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Удалить фрагменты пересечения + + Part_Tube + + + Create tube + Создать трубу + + + + Creates a tube + Создать трубу + + + + Part_MakeTube + + + Create tube + Создать трубу + + + + Creates a tube + Создать трубу + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sk.qm b/src/Mod/Part/Gui/Resources/translations/Part_sk.qm index 4b071fb6c9..a150b1b6a3 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts index a9452043d9..6e23c0d08d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm index ac21657e68..6769496d8a 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index a2121f8a59..abb8ef99f6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -271,19 +271,6 @@ Klikni "Nadaljuj", če želiš vseeno ustvariti značilnost, ali "Prekini" za pr Izberite predmet, v katerem želite narediti izrez, nato izberite predmet, kateremu se naj izrez prilega, in prikličite to orodje. - - Part_MakeTube - - - Create tube - Ustvari cev - - - - Creates a tube - Ustvari cev - - Part_SplitFeatures @@ -360,6 +347,32 @@ Kliknite "Nadaljuj", če želite vseeno ustvariti značilnost, ali "Prekini", za Odstrani presečne drobce + + Part_Tube + + + Create tube + Ustvari cev + + + + Creates a tube + Ustvari cev + + + + Part_MakeTube + + + Create tube + Ustvari cev + + + + Creates a tube + Ustvari cev + + Attacher @@ -1820,7 +1833,7 @@ Kliknite "Nadaljuj", če želite vseeno ustvariti značilnost, ali "Prekini", za Tools to offset shapes (construct parallel shapes) - Orodaj za odmikanje oblik (tvorjenje vzporednih oblik) + Orodja za odmikanje oblik (tvorjenje vzporednih oblik) @@ -2305,12 +2318,12 @@ Kliknite "Nadaljuj", če želite vseeno ustvariti značilnost, ali "Prekini", za Create shape from mesh... - Ustvari obliko iz ploskovja … + Ustvari obliko iz mreže … Create shape from selected mesh object - Ustvari obliko iz izbranega predmeta ploskovja + Ustvari obliko iz izbranega mrežnega objekta @@ -3198,7 +3211,7 @@ Najprej označite eno ali več robnih enot. Write out curves in parametric space of surface - Izpiši krivulje v parametričnem prostoru poršja + Izpiši krivulje v parametričnem prostoru površine @@ -3213,7 +3226,7 @@ Najprej označite eno ali več robnih enot. Enable STEP Compound merge - Omogoči STEP združevanje v sestave + Omogoči STEP Spajanje sestava @@ -3479,7 +3492,7 @@ Najprej označite eno ali več robnih enot. Regular polygon - Preprosti mnogokotnik + Pravilni mnogokotnik @@ -3921,7 +3934,7 @@ Najprej označite eno ali več robnih enot. Automatically refine model after sketch-based operation - Samodejno izpopolni oblikovanec po operacijah na podlagi črtov + Samodejno izpopolni oblikovanec po operacijah na podlagi očrtov diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.qm b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm index e3648ed7a3..ea48afdbac 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index b5032b7c64..f1ac326968 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm index c0ef028674..fa7e309ee0 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 5f31255f0c..0e1a9c2b92 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -271,19 +271,6 @@ Klicka på 'Fortsätt' för att skapa funktionen ändå, eller 'Avbryt' för att Välj objektet att göra ett utklipp i, sedan objektet som ska passa i utklippet, och använd sedan detta verktyg. - - Part_MakeTube - - - Create tube - Skapa tub - - - - Creates a tube - Skapar en tub - - Part_SplitFeatures @@ -360,6 +347,32 @@ Klicka på 'Fortsätt' för att skapa funktionen ändå, eller 'Avbryt' för att Ta bort skärningsfragment + + Part_Tube + + + Create tube + Skapa tub + + + + Creates a tube + Skapar en tub + + + + Part_MakeTube + + + Create tube + Skapa tub + + + + Creates a tube + Skapar en tub + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.qm b/src/Mod/Part/Gui/Resources/translations/Part_tr.qm index 1fc71ba2f5..18172a30a6 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_tr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_tr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index e6614c2549..693248a925 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -271,19 +271,6 @@ Buna rağmen özelliği oluşturmak için 'Devam'a, iptal etmek için' İptal'e Bir kesim yapmak için nesneyi seçin, ardından kesime uyması gereken nesneyi seçin ve bu aracı çalıştırın. - - Part_MakeTube - - - Create tube - Boru oluştur - - - - Creates a tube - Bir boru oluşturur - - Part_SplitFeatures @@ -360,6 +347,32 @@ Yine de özelliği oluşturmak için 'Devam Et'i tıklayın veya iptal etmek iç Kesişen parçaları kaldır + + Part_Tube + + + Create tube + Boru oluştur + + + + Creates a tube + Bir boru oluşturur + + + + Part_MakeTube + + + Create tube + Boru oluştur + + + + Creates a tube + Bir boru oluşturur + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm index 837f27743e..1f9953a91e 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index 78a186f62f..90936a3522 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Створити трубу - - - - Creates a tube - Створює трубу - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Видалити фрагменти, що перетинаються + + Part_Tube + + + Create tube + Створити трубу + + + + Creates a tube + Створює трубу + + + + Part_MakeTube + + + Create tube + Створити трубу + + + + Creates a tube + Створює трубу + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm index f3e178e46e..f7d1b6910d 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index 36fb6be916..20ce43528f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -271,19 +271,6 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Seleccioneu l'objecte en què realitzar un retall, després l'objecte que ha d'encabir-se en el retall i apliqueu aquesta eina. - - Part_MakeTube - - - Create tube - Crea un tub - - - - Creates a tube - Crea un tub - - Part_SplitFeatures @@ -360,6 +347,32 @@ Feu clic en 'Continua' per a crear la propietat de totes formes, o en 'Interromp Elimina els fragments d'intersecció + + Part_Tube + + + Create tube + Crea un tub + + + + Creates a tube + Crea un tub + + + + Part_MakeTube + + + Create tube + Crea un tub + + + + Creates a tube + Crea un tub + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.qm b/src/Mod/Part/Gui/Resources/translations/Part_vi.qm index 359e083ecd..5a4ecdcc4d 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_vi.qm and b/src/Mod/Part/Gui/Resources/translations/Part_vi.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index 70e9913909..67e82357b1 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Tạo ống - - - - Creates a tube - Tạo ra một ống - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Bỏ các phần giao nhau + + Part_Tube + + + Create tube + Tạo ống + + + + Creates a tube + Tạo ra một ống + + + + Part_MakeTube + + + Create tube + Tạo ống + + + + Creates a tube + Tạo ra một ống + + Attacher diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm index 6fc5840279..9e11634c93 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index f07907897e..4062948701 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - 创建管道 - - - - Creates a tube - 创建一个管道 - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + 创建管道 + + + + Creates a tube + 创建一个管道 + + + + Part_MakeTube + + + Create tube + 创建管道 + + + + Creates a tube + 创建一个管道 + + Attacher @@ -4497,7 +4510,7 @@ Please check one or more edge entities first. Check geometry - Check geometry + 检查几何体 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm index fa7a4b7293..bf3c04cb4c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 4eb84720da..49d14d9ba1 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -271,19 +271,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Select the object to make a cutout in, then the object that should fit into the cutout, and invoke this tool. - - Part_MakeTube - - - Create tube - Create tube - - - - Creates a tube - Creates a tube - - Part_SplitFeatures @@ -360,6 +347,32 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Remove intersection fragments + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_MakeTube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + Attacher diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm index f267779861..06a5bfd1b2 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm index 18a4fd4a9e..8d0ec220f0 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm index d552209481..1466e868ad 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm index 4e1259ebbf..ebcc43d11c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index bcc15e1420..c66034c06c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -281,7 +281,7 @@ Mirrored - Zrcadlený + Zrcadlit diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index 5168bf7b61..e072efb6da 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index e817937736..505caec0eb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -1721,7 +1721,7 @@ Pad parameters - Parameter der Aufpolsterung + Parameter der Extrusion @@ -2987,7 +2987,7 @@ Dieses Objekt ist beschädigt und kann nicht bearbeitet werden. Edit pad - Block bearbeiten + Extrusion bearbeiten @@ -3132,7 +3132,7 @@ Du kannst die Teile später jederzeit mit 'Part Design -> Migrieren...' migri Custom dimensions - Standard-Abmessungen + Benutzerdefinierte Maße diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm index 1170e7fcd3..6c33377dde 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm index d58499dbe6..f1465bee0f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 19c891187d..7cb70cbbf2 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -34,7 +34,7 @@ Sweep a selected sketch along a path or to other profiles - Barrido del croquis seleccionado a lo largo de un camino o de otros perfiles + Barrer un boceto seleccionado a través de una trayectoria u otros bocetos @@ -88,7 +88,7 @@ Create a new local coordinate system - Crear un nuevo sistema de coordenadas locales + Crear un nuevo sistema de coordenadas @@ -268,7 +268,7 @@ Migrate document to the modern PartDesign workflow - Migrar documentos al flujo de trabajo PartDesign moderno + Migrar documentos al banco de trabajo PartDesign @@ -281,7 +281,7 @@ Mirrored - Reflejar + Simetrico @@ -304,7 +304,7 @@ Moves the selected object to another body - Se mueve el objeto seleccionado a otro cuerpo + Mueve el objeto seleccionado a otro cuerpo diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm index 9b6a44a1d6..5c5653de29 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm index a950965fb8..c7a8e4e285 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm index f51cf23428..71dc583602 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm index adde7f890d..cb72df3f96 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm index b4967f4a45..6265bd02db 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm index 67adabb0b1..de124d215f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm index c5d9b75d5d..117532a263 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm index 614b2bde66..c1cf8c3ebb 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index 17bdfc12fa..c8bf877744 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm index ae67ea5a3b..19baea4a73 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm index 506df74368..099239003f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm index 5074d7ef6e..3532985129 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm index a1ac3ae88f..47d19173ad 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm index b80ecec60d..0c1c5bfbbe 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm index ee9b6ab7af..900973bd9e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts index af92f64dc0..d31e2e26d0 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts @@ -2940,7 +2940,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr Point - Point + Punkt diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm index fe18ec85d5..a9103db0d5 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index dcd25426b2..0b1d00d76e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -6,17 +6,17 @@ PartDesign - Projektowanie Części "Part" + Part Design Additive loft - Dodatkowy loft + Uzupełnianie wyciągnięciem po profilach Loft a selected profile through other profile sections - Loftuj wybrany profil za pośrednictwem innych sekcji profilu + Przeprowadź wybrany profil przez inne sekcje profilu @@ -24,7 +24,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -42,7 +42,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -60,7 +60,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -78,7 +78,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -96,17 +96,17 @@ PartDesign - Projektowanie Części "Part" + Part Design Chamfer - Faza + Fazka Chamfer the selected edges of a shape - Sfazuj wybrane krawędzie obiektu + Fazowanie zaznaczonych krawędzi kształtu @@ -114,7 +114,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -132,7 +132,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -150,7 +150,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -168,7 +168,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -186,7 +186,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -204,7 +204,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -222,7 +222,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -240,7 +240,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -258,7 +258,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -276,7 +276,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -294,7 +294,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -312,7 +312,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -330,7 +330,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -348,7 +348,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -366,12 +366,12 @@ PartDesign - Projektowanie Części "Part" + Part Design Create sketch - Tworzenie szkicu + Utwórz szkic @@ -384,7 +384,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -402,7 +402,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -420,7 +420,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -438,7 +438,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -456,7 +456,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -474,7 +474,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -484,7 +484,7 @@ Revolve a selected sketch - Wyciągnij przez obrót zaznaczony szkic + Wyciągnij zaznaczony szkic przez obrót @@ -492,7 +492,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -510,7 +510,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -528,17 +528,17 @@ PartDesign - Projektowanie Części "Part" + Part Design Subtractive loft - Subtraktywny loft + Odejmowanie wyciągnięciem po profilach Loft a selected profile through other profile sections and remove it from the body - Loftuj wybrany profil poprzez inne sekcje profilu i usuń je z zawartości + Przeprowadź wybrany profil przez inne profile i usuń go z zawartości @@ -546,7 +546,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -564,7 +564,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -582,7 +582,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -636,7 +636,7 @@ PartDesign - Projektowanie Części "Part" + Part Design @@ -715,7 +715,7 @@ Base plane - Podstawowa płaszczyzna + Płaszczyzna podstawowa @@ -1351,7 +1351,7 @@ Base plane - Podstawowa płaszczyzna + Płaszczyzna podstawowa @@ -1518,22 +1518,22 @@ Add Section - Dodaj sekcję + Dodaj sekcję profilu Remove Section - Usuń sekcję + Usuń sekcję profilu Update view - Aktualizacja widoku + Aktualizuj widok Loft parameters - Parametry szkicu + Parametry wyciągnięcia po profilach @@ -1926,12 +1926,12 @@ Add Section - Dodaj sekcję + Dodaj sekcję profilu Remove Section - Usuń sekcję + Usuń sekcję profilu @@ -2740,7 +2740,7 @@ Może to prowadzić do nieoczekiwanych rezultatów. Base feature - Podstawowa funkcja + Własność podstawowa @@ -2765,7 +2765,7 @@ Może to prowadzić do nieoczekiwanych rezultatów. Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. - Proszę edytować %1 i ponownie go zdefiniuj by używać podstawy lub punktu odniesienia płaszczyzny na płaszczyźnie szkicu. + Proszę edytować %1 i przedefiniuj go, aby używać płaszczyzny bazowej lub odniesienia jako płaszczyzny szkicu. @@ -2897,7 +2897,7 @@ Jeśli masz starszy dokument z obiektami PartDesign bez obiektu Body, użyj funk Feature is not in a body - Funkcja nie stanowi body + Funkcja nie jest w korpusie @@ -2983,7 +2983,7 @@ Ta funkcja jest wadliwa i nie może być edytowana. Edit loft - Edytuj wyciągnięcie + Edytuj wyciągnięcie po profilach diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm index b0bd2cb077..06f6df3b0f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm index 7f82a35f25..f1dd46fffd 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm index c3e096b169..5da5049b47 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index 7942d38af8..9835cfbbea 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm index 10b2667d5a..8c0b27880d 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm index 15ee3b24a0..3c641a6d11 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 6fc55ebbc7..e639e223ca 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -715,7 +715,7 @@ Base plane - Osnovna ravniva + Osnovna ravnina @@ -1348,7 +1348,7 @@ Base plane - Osnovna ravniva + Osnovna ravnina @@ -1771,7 +1771,7 @@ Fixed - Pritrjen + Nepremičen diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm index 6036ed188b..ced15d312b 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm index 292ba2c635..4fbbad66ab 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm index 5221464d50..bf34900f12 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index c808d7cf38..c3698bf740 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -574,7 +574,7 @@ Make a thick solid - Kalın bir katı yapınız + Katılama için et kalınlığı belirtin diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm index 64c57bb012..a3e73415ed 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm index 5acceb36d2..eaada5b3d2 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm index 44e69e779d..ef31883219 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm index 05841fa15c..363c8f15bd 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm index 0026e0ec22..b542a6c717 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.qm b/src/Mod/Path/Gui/Resources/translations/Path_af.qm index 365de43a7d..ab5d48e31c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_af.qm and b/src/Mod/Path/Gui/Resources/translations/Path_af.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.ts b/src/Mod/Path/Gui/Resources/translations/Path_af.ts index 2cf30a321d..948b65311c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_af.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_af.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Wysig - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Heliks + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Heliks - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Alle lêers (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm index a1cc6f9146..3542de5772 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts index b27872355d..cb7c69101a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - يتحكم في كيفية تحرك الأداة حول الزوايا. افتراضي = جولة - - - - Maximum distance before a miter join is truncated - يتم اقتطاع المسافة القصوى قبل انضمام تاج الاسقف - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - ثقوب الملف الشخصي وكذلك الخطوط العريضة - - - - Profile the outline - تعريف المخطط - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - تمكين التنقيط - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - نسبة قطر القاطع إلى الخطوة على كل تمريرة - - - - Angle of the zigzag pattern - زاوية من نمط متعرج - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path وحدة تحكم الأداة التي سيتم استخدامها لحساب المسار - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - طريقة التدحرج + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - أسلوب النمط - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + طريقة التدحرج + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + تمكين التنقيط + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + نسبة قطر القاطع إلى الخطوة على كل تمريرة - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + زاوية من نمط متعرج + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + أسلوب النمط + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + يتحكم في كيفية تحرك الأداة حول الزوايا. افتراضي = جولة + + + + Maximum distance before a miter join is truncated + يتم اقتطاع المسافة القصوى قبل انضمام تاج الاسقف + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + ثقوب الملف الشخصي وكذلك الخطوط العريضة + + + + Profile the outline + تعريف المخطط + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - العمليات الثلاثية الأبعاد - - - - Project Setup - Project Setup - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - الأدوات المفيدة - - - - &Path - &المسار - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit تعديل - - Heights - الإرتفاعات + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - اختيار نقطة البداية + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + الإرتفاعات - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + اختيار نقطة البداية + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + العمليات الثلاثية الأبعاد - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + الأدوات المفيدة + + + + &Path + &المسار + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Helix + + + + Creates a Path Helix object from a features of a base object + لإنشاء كائن مسار حلزوني من ميزات كائن أساسي + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Helix - - - - Creates a Path Helix object from a features of a base object - لإنشاء كائن مسار حلزوني من ميزات كائن أساسي - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - قاعدة علم الهندسة - - - - Base Location - موقع القاعدة - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label تسمية المستخدم المعينة + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + قاعدة علم الهندسة + + + + Base Location + موقع القاعدة + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - تمرير التمديد - - - - The distance the facing operation will extend beyond the boundary shape. - والمسافة التي تواجه العملية تمتد خارج شكل الحدود. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + تمرير التمديد + + + + The distance the facing operation will extend beyond the boundary shape. + والمسافة التي تواجه العملية تمتد خارج شكل الحدود. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller الأداة المستخدمة من قبل وحدة التحكم هذه - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - العنصر الذي قمت بإختياره ليس عبارة عن مسار - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + العنصر الذي قمت بإختياره ليس عبارة عن مسار + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - إنشاء علامة تلبيس - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - المرجو إختيار عنصر مسار واحد - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + العنصر الذي قمت بإختياره ليس عبارة عن مسار + + + + Please select a Profile object + الرجاء تحديد كائن ملف شخصي + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + إنشاء علامة تلبيس + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + المرجو إختيار عنصر مسار واحد + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - العنصر الذي قمت بإختياره ليس عبارة عن مسار - - - - Please select a Profile object - الرجاء تحديد كائن ملف شخصي - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + ينشئ كائن مسار الوظيفة + + + + Export Template + تصدير القالب + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - ينشئ كائن مسار الوظيفة - - - - Export Template - تصدير القالب - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm index 4805a0e610..d801a82cb3 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index 9a2d39b0f1..28235ccf59 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Afig al programa una parada opcional o obligatòria - - - - The base object this collision refers to - L'objecte base a què es refereix aquesta interferència - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - La direcció que la trajectòria ha de seguir al voltant de la peça, sentit horari (CW) o antihorari (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Estableix el percentatge de pas, en funció del diàmetre de l'eina. - - - - Controls how tool moves around corners. Default=Round - Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó - - - - Maximum distance before a miter join is truncated - Distància màxima abans que es trunque la unió en biaix - - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor addicional per a mantindre's a distància del perfil final, és bo per a trajectòries de desbast - - - - Profile holes as well as the outline - Perfila els forats a més del contorn - - - - Profile the outline - Perfila el contorn - - - - Profile round holes - Perfila els forats redons - - - - Side of edge that tool should cut - Costat de la vora que eina ha de tallar - - - - Make True, if using Cutter Radius Compensation - Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - - - Reverse direction of pocket operation. - Inverteix la direcció de l'operació de buidatge. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverteix l'angle. Exemple: -22.5 -> 22.5 graus. - - - - Attempt the inverse angle for face access if original rotation fails. - Intenteu l’angle invers per a l'accés a la cara si falla la rotació original. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Apliqueu la profunditat Z de la cara seleccionada com a valor més baix per a la profunditat final. S'observaran valors majors d'usuari. - - - - The object to be reached by this hop - L'objecte que s'assoleix amb aquest salt - - - - The Z height of the hop - L'alçària Z del salt - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Activar la rotació per accedir a les butxaques/àrees no normals a l'eix Z. - Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Configura el patró de neteja geomètric que utilitzarà aquesta operació. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Completa l'operació en una sola passada en profunditat o en en diverses passades fins la profunditat final. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - Punt d'inici personalitzat pel camí d'aquesta operació - - - - Make True, if specifying a Start Point - Marqueu «cert», si s'especifica un punt final - - - - Incremental Drill depth before retracting to clear chips - Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa - - - - Enable pecking - Habilita les passades - - - - The time to dwell between peck cycles - Duració de la pausa entre cicles de passada - - - - Enable dwell - Habilita l'espera - - - - Calculate the tip length and subtract from final depth - Calcula la longitud de la punta i resta-la de la profunditat final - - - - Controls how tool retracts Default=G98 - Controla la manera en què l'eina es retrau. Per defecte=G98 - - - - The height where feed starts and height during retract tool when path is finished - L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat - - - - Controls how tool retracts Default=G99 - Controla la manera en què l'eina es retrau. Per defecte=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - L'alçària on s'inicia l'avanç i l'alçària durant la retracció de l'eina quan s’acaba el camí en una operació de passada - - - - How far the drill depth is extended - Fins on s’amplia la profunditat de la perforació - - - - Fixture Offset Number - Nombre de desplaçaments de la fixació - - - - Make False, to prevent operation from generating code - Marqueu «fals», per a evitar l'operació de generació de codi - - - - Extra offset to apply to the operation. Direction is operation dependent. - Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. - - - - Start pocketing at center or boundary - Comença a foradar al centre o al límit - - - - Percent of cutter diameter to step over on each pass - Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - - - Angle of the zigzag pattern - Angle del patró en zig-zag - - - - Clearing pattern to use - Patró de neteja que s'utilitza - - - - Use 3D Sorting of Path - Utilitza la distribució 3D del camí - - - - Attempts to avoid unnecessary retractions. - Intents per a evitar retraccions innecessàries. - - - - Orientation plane of CNC path - Pla d'orientació del camí CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Defineix la direcció de l'eina de tall per a escometre el material: Pujada (sentit horari) o Convencional (sentit antihorari) + + + Set the geometric clearing pattern to use for the operation. + Configura el patró de neteja geomètric que utilitzarà aquesta operació. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Estableix el desplaçament de la profunditat de l'eix Z des de la superfície objectiu. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Completa l'operació en una sola passada en profunditat o en en diverses passades fins la profunditat final. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Configura la resolució de mostreig. Els valors més xicotets augmenten ràpidament el temps de processament. + + + Set the stepover percentage, based on the tool's diameter. + Estableix el percentatge de pas, en funció del diàmetre de l'eina. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Comentari: tres buits més petits identificats a la geometria del camí. + + + The custom start point for the path of this operation + Punt d'inici personalitzat pel camí d'aquesta operació + + + + Make True, if specifying a Start Point + Marqueu «cert», si s'especifica un punt final + The path to be copied El camí que es copia + + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria + The tool controller that will be used to calculate the path El controlador d'eina que s'utilitza per a calcular el camí - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Els valors més petits produeixen la malla més fina i precisa. Els valors més petits augmenten molt el temps de processament. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Els valors més petits produeixen la malla més fina i precisa. Els valors més petits no augmenten massa el temps de processament. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Seleccioneu l'algorisme a utilitzar: OCL Dropcutter* o Experimental (no basat en OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Estableix esborrar l'última capa en una operació de "Multi-pass". - - - - Ignore outer waterlines above this height. - Ignora les línies de navegació exteriors per damunt d'aquesta alçada. - The base path to modify @@ -534,54 +269,39 @@ Alçària a què s'eleva durant l'acció de cantonada - - Ramping Method - Mètode de rampa + + The object to be reached by this hop + L'objecte que s'assoleix amb aquest salt - - Which feed rate to use for ramping - Quina velocitat d'avanç cal utilitzar per a la rampa + + The Z height of the hop + L'alçària Z del salt - - Custom feedrate - Rati d'avanç personalitzat + + X offset between tool and probe + Desplaçament X entre l'eina i la sonda - - Custom feed rate - Velocitat d'avanç personalitzada + + Y offset between tool and probe + Desplaçament Y entre l'eina i la sonda - - Should the dressup ignore motion commands above DressupStartDepth - Si la modificació ha d'ignorar les ordres del moviment per damunt de DressupStartDepth (Profunditat inicial de la trajectòria addicional) + + Number of points to probe in X direction + Nombre de punts per a examinar en direcció X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - La profunditat en què està habilitada la trajectòria addicional (dressup) de la rampa. Per damunt d'això no es generen rampes, però les ordres de moviment es transmeten com són. + + Number of points to probe in Y direction + Nombre de punts per a examinar en direcció Y - - Pattern method - Mètode del patró - - - - Shape to use for calculating Boundary - Forma que s'utilitza per al càlcul del límit - - - - Clear edges of surface (Only applicable to BoundBox) - Neteja les arestes de la superfície (només s'aplica a BoundBox) - - - - Exclude milling raised areas inside the face. - Exclou les àrees elevades de fresat de la cara. + + The output location for the probe data to be written + La ubicació de sortida que s'ha d'escriure per a les dades de la sonda @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apliqueu LeadInOut a capes dins d’una operació + + + Fixture Offset Number + Nombre de desplaçaments de la fixació + + + + Make False, to prevent operation from generating code + Marqueu «fals», per a evitar l'operació de generació de codi + + + + Ramping Method + Mètode de rampa + + + + Which feed rate to use for ramping + Quina velocitat d'avanç cal utilitzar per a la rampa + + + + Custom feedrate + Rati d'avanç personalitzat + + + + Custom feed rate + Velocitat d'avanç personalitzada + + + + Should the dressup ignore motion commands above DressupStartDepth + Si la modificació ha d'ignorar les ordres del moviment per damunt de DressupStartDepth (Profunditat inicial de la trajectòria addicional) + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + La profunditat en què està habilitada la trajectòria addicional (dressup) de la rampa. Per damunt d'això no es generen rampes, però les ordres de moviment es transmeten com són. + + + + Incremental Drill depth before retracting to clear chips + Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa + + + + Enable pecking + Habilita les passades + + + + The time to dwell between peck cycles + Duració de la pausa entre cicles de passada + + + + Enable dwell + Habilita l'espera + + + + Calculate the tip length and subtract from final depth + Calcula la longitud de la punta i resta-la de la profunditat final + + + + Controls how tool retracts Default=G98 + Controla la manera en què l'eina es retrau. Per defecte=G98 + + + + The height where feed starts and height during retract tool when path is finished + L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat + + + + Controls how tool retracts Default=G99 + Controla la manera en què l'eina es retrau. Per defecte=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + L'alçària on s'inicia l'avanç i l'alçària durant la retracció de l'eina quan s’acaba el camí en una operació de passada + + + + How far the drill depth is extended + Fins on s’amplia la profunditat de la perforació + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Activar la rotació per accedir a les butxaques/àrees no normals a l'eix Z. + + + + Reverse direction of pocket operation. + Inverteix la direcció de l'operació de buidatge. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverteix l'angle. Exemple: -22.5 -> 22.5 graus. + + + + Attempt the inverse angle for face access if original rotation fails. + Intenteu l’angle invers per a l'accés a la cara si falla la rotació original. + + + + Orientation plane of CNC path + Pla d'orientació del camí CNC + + + + Shape to use for calculating Boundary + Forma que s'utilitza per al càlcul del límit + + + + Clear edges of surface (Only applicable to BoundBox) + Neteja les arestes de la superfície (només s'aplica a BoundBox) + + + + Exclude milling raised areas inside the face. + Exclou les àrees elevades de fresat de la cara. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Els valors més petits produeixen la malla més fina i precisa. Els valors més petits augmenten molt el temps de processament. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Els valors més petits produeixen la malla més fina i precisa. Els valors més petits no augmenten massa el temps de processament. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Seleccioneu l'algorisme a utilitzar: OCL Dropcutter* o Experimental (no basat en OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Estableix esborrar l'última capa en una operació de "Multi-pass". + + + + Ignore outer waterlines above this height. + Ignora les línies de navegació exteriors per damunt d'aquesta alçada. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Apliqueu la profunditat Z de la cara seleccionada com a valor més baix per a la profunditat final. S'observaran valors majors d'usuari. + + + + The base object this collision refers to + L'objecte base a què es refereix aquesta interferència + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Processar el model i l'estoc en una operació sense la geometria base seleccionada. - - X offset between tool and probe - Desplaçament X entre l'eina i la sonda + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + La direcció que la trajectòria ha de seguir al voltant de la peça, sentit horari (CW) o antihorari (CCW) - - Y offset between tool and probe - Desplaçament Y entre l'eina i la sonda + + Extra offset to apply to the operation. Direction is operation dependent. + Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. - - Number of points to probe in X direction - Nombre de punts per a examinar en direcció X + + Start pocketing at center or boundary + Comença a foradar al centre o al límit - - Number of points to probe in Y direction - Nombre de punts per a examinar en direcció Y + + Percent of cutter diameter to step over on each pass + Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - The output location for the probe data to be written - La ubicació de sortida que s'ha d'escriure per a les dades de la sonda + + Angle of the zigzag pattern + Angle del patró en zig-zag + + + + Clearing pattern to use + Patró de neteja que s'utilitza + + + + Use 3D Sorting of Path + Utilitza la distribució 3D del camí + + + + Attempts to avoid unnecessary retractions. + Intents per a evitar retraccions innecessàries. + + + + Add Optional or Mandatory Stop to the program + Afig al programa una parada opcional o obligatòria + + + + Pattern method + Mètode del patró + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + + + + Maximum distance before a miter join is truncated + Distància màxima abans que es trunque la unió en biaix + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor addicional per a mantindre's a distància del perfil final, és bo per a trajectòries de desbast + + + + Profile holes as well as the outline + Perfila els forats a més del contorn + + + + Profile the outline + Perfila el contorn + + + + Profile round holes + Perfila els forats redons + + + + Side of edge that tool should cut + Costat de la vora que eina ha de tallar + + + + Make True, if using Cutter Radius Compensation + Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operacions de gravat - - - - 3D Operations - Operacions 3D - - - - Project Setup - Configuració del projecte - - - - Tool Commands - Ordres d'eina - - - - New Operations - Operacions noves - - - - Path Modification - Modificació del camí - - - - Helpful Tools - Eines útils - - - - &Path - &Camí - - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Ordres addicionals - - - - Unable to create path for face(s). - No es pot crear el camí per a les cares. - - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - - - - Rotated to inverse angle. - Rotat a l'angle invers. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Les funcions seleccionades requereixen «Habilita la rotació: A(x)» per a l'accés. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. - - - - -<br>Pocket is based on extruded surface. - -<br>El buidatge es basa en la superfície extrudida. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>El fons del buidatge pot ser no plana i/o no normal en l'eix del fus. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>El fons del buidatge 3D NO és disponible en aquesta operació</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Penseu a alternar la propietat InverseAngle i tornar a calcular l'operació. - - - - Processing subs individually ... - S'estan processant subs individualment... - - - - Depth Warning - Advertència de profunditat - - - - Verify final depth of pocket shaped by vertical faces. - Verifiqueu la profunditat final del buidatge format per cares verticals. - - - - Processing model as a whole ... - S'està processant el model en conjunt... - - - - Can not identify loop. - No es pot identificar el bucle. - Edit Edita - - Heights - Alçàries + + %s is not a Base Model object of the job %s + %s no és un objecte de Model base del treball %s - - AreaOp Operation - Operació AreaOp + + Base shape %s already in the list + La forma base %s ja és a la llista - - Uncreate AreaOp Operation - Elimina l'operació AreaOp + + Ignoring vertex + S'ignoren els vèrtexs - - Pick Start Point - Trieu el punt d'inici + + Didn't find job %s + No s'ha trobat la tasca %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina @@ -1133,19 +1005,127 @@ L'objecte base %s.%s rebutjat per l'operació - - %s is not a Base Model object of the job %s - %s no és un objecte de Model base del treball %s + + Heights + Alçàries - - Base shape %s already in the list - La forma base %s ja és a la llista + + AreaOp Operation + Operació AreaOp - - Ignoring vertex - S'ignoren els vèrtexs + + Uncreate AreaOp Operation + Elimina l'operació AreaOp + + + + Pick Start Point + Trieu el punt d'inici + + + + +<br>Pocket is based on extruded surface. + +<br>El buidatge es basa en la superfície extrudida. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>El fons del buidatge pot ser no plana i/o no normal en l'eix del fus. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>El fons del buidatge 3D NO és disponible en aquesta operació</i>. + + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + + + + Consider toggling the InverseAngle property and recomputing the operation. + Penseu a alternar la propietat InverseAngle i tornar a calcular l'operació. + + + + Processing subs individually ... + S'estan processant subs individualment... + + + + Depth Warning + Advertència de profunditat + + + + Verify final depth of pocket shaped by vertical faces. + Verifiqueu la profunditat final del buidatge format per cares verticals. + + + + Processing model as a whole ... + S'està processant el model en conjunt... + + + + Can not identify loop. + No es pot identificar el bucle. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + No es disposa d'inici adaptatiu planar. S’intentarà el no planar. + + + + The non-planar adaptive start is also unavailable. + L'inici adaptatiu no planar tampoc està disponible. + + + + Rotated to inverse angle. + Rotat a l'angle invers. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Les funcions seleccionades requereixen «Habilita la rotació: A(x)» per a l'accés. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. @@ -1173,39 +1153,59 @@ Seleccioneu sempre l'aresta inferior del forat quan s'utilitzi una aresta. - - A planar adaptive start is unavailable. The non-planar will be attempted. - No es disposa d'inici adaptatiu planar. S’intentarà el no planar. + + Unable to create path for face(s). + No es pot crear el camí per a les cares. - - The non-planar adaptive start is also unavailable. - L'inici adaptatiu no planar tampoc està disponible. + + Engraving Operations + Operacions de gravat - - Didn't find job %s - No s'ha trobat la tasca %s + + 3D Operations + Operacions 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + Project Setup + Configuració del projecte - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + Tool Commands + Ordres d'eina - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + New Operations + Operacions noves - - Cutting Edge Angle (%.2f) results in negative tool tip length - L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina + + Path Modification + Modificació del camí + + + + Helpful Tools + Eines útils + + + + &Path + &Camí + + + + Path Dressup + Aspecte del camí + + + + Supplemental Commands + Ordres addicionals @@ -1387,16 +1387,6 @@ PathEngrave - - - Additional base objects to be engraved - Objectes de base addicionals per a gravar - - - - The vertex index to start the path from - L'índex del vèrtex en què comença el camí - Engrave @@ -1407,6 +1397,16 @@ Creates an Engraving Path around a Draft ShapeString Crea un camí gravat basat en una forma de text d'esborrany + + + Additional base objects to be engraved + Objectes de base addicionals per a gravar + + + + The vertex index to start the path from + L'índex del vèrtex en què comença el camí + PathFace @@ -1462,16 +1462,16 @@ PathGui - - - %s has no property %s (%s)) - %s té cap propietat %s (%s)) - Cannot find property %s of %s No pot trobar la propietat %s de %s + + + %s has no property %s (%s)) + %s té cap propietat %s (%s)) + Tool Error @@ -1490,6 +1490,16 @@ PathHelix + + + Helix + Hèlix + + + + Creates a Path Helix object from a features of a base object + Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1510,16 +1520,6 @@ Starting Radius Radi inicial - - - Helix - Hèlix - - - - Creates a Path Helix object from a features of a base object - Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1528,6 +1528,31 @@ PathJob + + + Unsupported stock object %s + Tipus d'objecte stock no suportat %s + + + + Unsupported stock type %s (%d) + No s'admet el tipus d'stock %s (%d) + + + + Stock not from Base bound box! + No Stockis no des de la Base de caixa lligada! + + + + Stock not a box! + No una caixa d'existències! + + + + Stock not a cylinder! + No un cilindre d'existències! + The NC output file for this project @@ -1598,31 +1623,6 @@ Unsupported PathJob template version %s No està suportada plantilla PathJob versió %s - - - Unsupported stock object %s - Tipus d'objecte stock no suportat %s - - - - Unsupported stock type %s (%d) - No s'admet el tipus d'stock %s (%d) - - - - Stock not from Base bound box! - No Stockis no des de la Base de caixa lligada! - - - - Stock not a box! - No una caixa d'existències! - - - - Stock not a cylinder! - No un cilindre d'existències! - Solids @@ -1666,43 +1666,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Estimació del temps del cicle d'operacions - - - - Base Geometry - Geometria de base - - - - Base Location - Posició de base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Aquesta operació no pot modificar la profunditat final. -Si és necessari establir la profunditat final de forma manual, seleccioneu una operació diferent. - - - - Depths - Profunditats - - - - Operation - Operació - The base geometry for this operation @@ -1748,6 +1711,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una User Assigned Label Etiqueta assignada de l'usuari + + + Operations Cycle Time Estimation + Estimació del temps del cicle d'operacions + Base locations for this operation @@ -1813,6 +1781,38 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Coolant option for this operation Opció de refrigeració per a aquesta operació + + + Base Geometry + Geometria de base + + + + Base Location + Posició de base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Aquesta operació no pot modificar la profunditat final. +Si és necessari establir la profunditat final de forma manual, seleccioneu una operació diferent. + + + + Depths + Profunditats + + + + Operation + Operació + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1825,19 +1825,14 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket - - Choose how to process multiple Base Geometry features. - Trieu com processar diverses propietats de Geometria base. + + 3D Pocket + Buidat 3D - - Pass Extension - Extensió de la passada - - - - The distance the facing operation will extend beyond the boundary shape. - La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. + + Creates a Path 3D Pocket object from a face or faces + Crea un objecte Trajectòria de buidat 3D des de una cara o cares @@ -1855,14 +1850,29 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Las cares verticals no formen un cicle - ignorant - - 3D Pocket - Buidat 3D + + Adaptive clearing and profiling + Perfil i neteja adaptatius - - Creates a Path 3D Pocket object from a face or faces - Crea un objecte Trajectòria de buidat 3D des de una cara o cares + + Pass Extension + Extensió de la passada + + + + The distance the facing operation will extend beyond the boundary shape. + La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. + + + + Choose how to process multiple Base Geometry features. + Trieu com processar diverses propietats de Geometria base. + + + + Final depth set below ZMin of face(s) selected. + Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. @@ -1889,16 +1899,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Pocket object from a face or faces Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares - - - Adaptive clearing and profiling - Perfil i neteja adaptatius - - - - Final depth set below ZMin of face(s) selected. - Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - Generating toolpath with libarea offsets. @@ -1946,6 +1946,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathProfile + + + Profile based on face or faces + Perfil basat en una o més cares + Profile @@ -2016,11 +2021,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Perfil basat en una o més cares - Edge Profile @@ -2426,26 +2426,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2551,6 +2531,26 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2661,56 +2661,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathToolBit - - - Create Tool - Crea l'eina - - - - Creates a new ToolBit object - Crea un objecte Broca d'eina nou - - - - Save Tool as... - Anomena i desa l'eina... - - - - Save Tool - Desa l'eina - - - - Save an existing ToolBit object to a file - Desa un objecte Broca de l'eina existent en un fitxer - - - - Load Tool - Carrega l'eina - - - - Load an existing ToolBit object from a file - Carrega un objecte Broca d'eina existent des d'un fitxer - - - - Edit ToolBit - Edita la broca de l'eina - - - - Uncreate ToolBit - No s'ha creat la broca de l'eina - - - - Create ToolBit - Crea la broca de l'eina - Shape for bit shape @@ -2751,6 +2701,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Chipload as per manufacturer Avanç per dent segons el fabricant + + + Edit ToolBit + Edita la broca de l'eina + + + + Uncreate ToolBit + No s'ha creat la broca de l'eina + + + + Create ToolBit + Crea la broca de l'eina + + + + Create Tool + Crea l'eina + + + + Creates a new ToolBit object + Crea un objecte Broca d'eina nou + + + + Save Tool as... + Anomena i desa l'eina... + + + + Save Tool + Desa l'eina + + + + Save an existing ToolBit object to a file + Desa un objecte Broca de l'eina existent en un fitxer + + + + Load Tool + Carrega l'eina + + + + Load an existing ToolBit object from a file + Carrega un objecte Broca d'eina existent des d'un fitxer + PathToolBitLibrary @@ -2777,6 +2777,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathToolController + + + Error updating TC: %s + Error d'actualització TC: %s + The active tool @@ -2827,11 +2832,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una The tool used by this controller L'eina utilitzada per aquest controlador - - - Error updating TC: %s - Error d'actualització TC: %s - PathToolLibraryManager @@ -3213,26 +3213,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_DressupPathBoundary - - - The base path to modify - El camí de base que es modifica - - - - Solid object to be used to limit the generated Path. - Objecte sòlid que s'utilitzarà per a limitar el camí generat. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determina si el límit descriu una màscara d’inclusió o d'exclusió. - - - - The selected object is not a path - L'objecte seleccionat no és un camí - Create a Boundary dressup @@ -3258,6 +3238,26 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Path Boundary Dress-up Crea una modificació limitada de camí + + + The base path to modify + El camí de base que es modifica + + + + Solid object to be used to limit the generated Path. + Objecte sòlid que s'utilitzarà per a limitar el camí generat. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determina si el límit descriu una màscara d’inclusió o d'exclusió. + + + + The selected object is not a path + L'objecte seleccionat no és un camí + Path_DressupRampEntry @@ -3284,41 +3284,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_DressupTag - - - Cannot copy tags - internal error - No es poden copiar etiquetes - s'ha produït un error intern - - - - Create a Tag dressup - Crea un aspecte d'etiqueta - - - - Tag Dress-up - Aspecte d'etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat - - - - Please select one path object - Si us plau, seleccioneu un objecte de tipus camí - - - - Create Tag Dress-up - Crea un aspecte d'etiqueta - - - - Holding Tag - Etiquetes de subjecció - The base path to modify @@ -3359,6 +3324,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Factor determining the # of segments used to approximate rounded tags. Factor que determina els # de segments utilitzats per a aproximar etiquetes arrodonides. + + + Cannot insert holding tags for this path - please select a Profile path + No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí + + + + The selected object is not a path + L'objecte seleccionat no és un camí + + + + Please select a Profile object + Seleccioneu un objecte perfil + + + + Holding Tag + Etiquetes de subjecció + + + + Cannot copy tags - internal error + No es poden copiar etiquetes - s'ha produït un error intern + + + + Create a Tag dressup + Crea un aspecte d'etiqueta + + + + Tag Dress-up + Aspecte d'etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat + + + + Please select one path object + Si us plau, seleccioneu un objecte de tipus camí + + + + Create Tag Dress-up + Crea un aspecte d'etiqueta + No Base object found. @@ -3379,21 +3394,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Base Path is empty. El camí base és buit. - - - The selected object is not a path - L'objecte seleccionat no és un camí - - - - Please select a Profile object - Seleccioneu un objecte perfil - - - - Cannot insert holding tags for this path - please select a Profile path - No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí - Path_DressupZCorrect @@ -3513,6 +3513,31 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Job + + + Job + Tasca + + + + Creates a Path Job object + Crea un objecte de tipus tasca de camí + + + + Export Template + Exporta la plantilla + + + + Exports Path Job as a template to be used for other jobs + Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques + + + + Create Job + Crea una tasca + Edit Job @@ -3538,31 +3563,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Model Selection Selecció del model - - - Create Job - Crea una tasca - - - - Job - Tasca - - - - Creates a Path Job object - Crea un objecte de tipus tasca de camí - - - - Export Template - Exporta la plantilla - - - - Exports Path Job as a template to be used for other jobs - Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques - Path_OpActiveToggle @@ -3622,9 +3622,9 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Probe - - Select Output File - Seleccioneu el fitxer d'eixida + + Select Probe Point File + Seleccioneu el fitxer de punt de sonda @@ -3632,9 +3632,9 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Tots els arxius (*.*) - - Select Probe Point File - Seleccioneu el fitxer de punt de sonda + + Select Output File + Seleccioneu el fitxer d'eixida diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm index 36313cc82a..8b2228cf03 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm and b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index c51b2c2972..c56c14bdc0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Natavte Nepravdu, aby operace negenerovala kód - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied Cesta ke kopírování + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Natavte Nepravdu, aby operace negenerovala kód + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Nastavení projektu - - - - Tool Commands - Tool Commands - - - - New Operations - Nové operace - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - Cesta - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Upravit - - Heights - Výšky + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Výšky - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Nastavení projektu - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Nové operace - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + Cesta + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Spirála + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Spirála - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Všechny soubory (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.qm b/src/Mod/Path/Gui/Resources/translations/Path_de.qm index a29786ad5b..5db18ff0ba 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_de.qm and b/src/Mod/Path/Gui/Resources/translations/Path_de.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index 50689c2364..acfdd32ac5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Ein optionaler oder obligatorischer Programmstop - - - - The base object this collision refers to - Das Basisobjekt auf das sich diese Kollision bezieht - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - Die Richtung, die der Werkzeugweg um das Teil beschreibt. Im Uhrzeigersinn (CW) oder entgegen des Uhrzeigersinns (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Kontrolliert wie sich das Werkzeug um Ecken bewegt. Standard=rund - - - - Maximum distance before a miter join is truncated - Maximale Entfernung, bevor Gehrungsverbindungen abgeschnitten werden - - - - The base geometry of this toolpath - Die Basis-Geometrie dieses Werkzeugweges - - - - Extra value to stay away from final profile- good for roughing toolpath - Aufmaß zum Endprofil - Geeignet für die schruppende Vor-Bearbeitung - - - - Profile holes as well as the outline - Sowohl Löcher im Profil als auch die Aussenlinie - - - - Profile the outline - Kontur profilieren - - - - Profile round holes - Runde Profillöcher - - - - Side of edge that tool should cut - Die Seite der Kante, welche das Werkzeug schneiden soll - - - - Make True, if using Cutter Radius Compensation - Auf Wahr setzen, wenn die Fräser-Radiuskompensation verwendet werden soll - - - - Reverse direction of pocket operation. - Richtung der Taschenoperation umkehren. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Winkel umkehren. Beispiel: -22.5 -> 22.5 Grad. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Das Objekt, welches durch diese Sprung erreicht werden soll - - - - The Z height of the hop - Die Z-Höhe dieses Sprungs - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Drehung aktivieren, um Zugriff auf Aussparungen/Bereiche zu erhalten, die nicht normal zur Z-Achse sind. - Show the temporary path construction objects when module is in DEBUG mode. Zeigt im DEBUG-Modus den temporären Objekte Pfad-konstruktion. - - - Enter custom start point for slot path. - Gib den benutzerdefinierten Startpunkt für die Nute ein. - - - - Enter custom end point for slot path. - Gib den benutzerdefinierten Endpunkt für die Nute ein. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Aktivieren, um die Schnittrichtung der Nute umzukehren. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll - - - - Incremental Drill depth before retracting to clear chips - Inkrementelle Bohrtiefe vor jedem Zurückziehen, um Späne zu lösen und auszuwerfen - - - - Enable pecking - Spanbrechen aktivieren - - - - The time to dwell between peck cycles - Haltezeit zwischen den Schrittzyklen - - - - Enable dwell - Pause aktivieren - - - - Calculate the tip length and subtract from final depth - Berechnung der Spitzenlänge und Abzug von der Endtiefe - - - - Controls how tool retracts Default=G98 - Steuert wie stark ein Werkzeug zurückzieht. Vorgabe: G98 - - - - The height where feed starts and height during retract tool when path is finished - Die Höhe, bei der die Positionierbewegung beginnt und der Rückzug am Bahnende durchgeführt wird - - - - Controls how tool retracts Default=G99 - Steuert, wie das Werkzeug zurückfährt Standard=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Abstand von der Einspannung - - - - Make False, to prevent operation from generating code - Abwählen, damit die Aktion keinen Code generiert - - - - Extra offset to apply to the operation. Direction is operation dependent. - Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. - - - - Start pocketing at center or boundary - Tasche im Mittelpunkt oder am Rand starten - - - - Percent of cutter diameter to step over on each pass - Faktor für die seitliche Zustellung - - - - Angle of the zigzag pattern - Winkel des Zick-Zack Musters - - - - Clearing pattern to use - Ausräummuster - - - - Use 3D Sorting of Path - 3D-Sortierung des Pfades verwenden - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientierungsebene des CNC-Pfades - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -376,7 +106,7 @@ Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. - Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. + Das Schneiden der letzten 'N' Flächen der Basisgeometrie oder der ausgewählten Flächen vermeiden. @@ -391,7 +121,7 @@ If true, the cutter will remain inside the boundaries of the model or selected face(s). - If true, the cutter will remain inside the boundaries of the model or selected face(s). + Wenn aktiv: der Fräser bleibt innerhalb der Grenzen des Modells oder der ausgewählten Fläche(n). @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -446,17 +186,22 @@ Profile the edges of the selection. - Profile the edges of the selection. + Geben Sie den Kanten der Auswahl ein Profil. Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Legt die Überlappung in Prozent fest, basierend auf dem Werkzeugdurchmesser. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. - Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. + Aktiviere die Optimierung von linearen Bearbeitungsbahnen (kolineare Punkte). Entfernt unnötige kolineare Punkte vom G-Code. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + Der benutzerdefinierte Startpunktfür die Bewegungsbahn dieser Operation + + + + Make True, if specifying a Start Point + Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll + The path to be copied Der zu kopierende Pfad + + + The base geometry of this toolpath + Die Basis-Geometrie dieses Werkzeugweges + The tool controller that will be used to calculate the path Vermessungspunkt welcher zur Berechnung des Werkzeugweges verwendet wird - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -533,6 +268,96 @@ Height to raise during corner action Anhebehöhe bei Eckenprozess + + + The object to be reached by this hop + Das Objekt, welches durch diese Sprung erreicht werden soll + + + + The Z height of the hop + Die Z-Höhe dieses Sprungs + + + + X offset between tool and probe + X-Offset zwischen Werkzeug und Sonde + + + + Y offset between tool and probe + Y-Offset zwischen Werkzeug und Sonde + + + + Number of points to probe in X direction + Anzahl der Sondierungspunkte in X-Richtung + + + + Number of points to probe in Y direction + Anzahl der Sondierungspunkte in Y-Richtung + + + + The output location for the probe data to be written + Der Ausgabeort für die zu schreibenden Sondendaten + + + + Calculate roll-on to path + Berechne die Anfahrt zur Kontur + + + + Calculate roll-off from path + Berechne die Wegfahrt von der Kontur + + + + Keep the Tool Down in Path + Halte das Werkzeug im Pfad + + + + Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + Verwende Radiuskompensation / Werkzeugbahnkorrektur G41 / G42 + + + + Length or Radius of the approach + Länge oder Radius der Anfahrt + + + + Extends LeadIn distance + Erweitert LeadIn-Entfernung + + + + Extends LeadOut distance + Erweitert LeadOut-Entfernung + + + + Perform plunges with G0 + Schnelles Eintauchen mit G0 + + + + Apply LeadInOut to layers within an operation + Apply LeadInOut to layers within an operation + + + + Fixture Offset Number + Abstand von der Einspannung + + + + Make False, to prevent operation from generating code + Abwählen, damit die Aktion keinen Code generiert + Ramping Method @@ -564,9 +389,79 @@ Die Tiefe, in der die Rampen aktiviert sind. Darüber hinaus werden Rampen nicht erzeugt, Bewegungsbefehle werden jedoch unverändert weitergegeben. - - Pattern method - Muster-Methode + + Incremental Drill depth before retracting to clear chips + Inkrementelle Bohrtiefe vor jedem Zurückziehen, um Späne zu lösen und auszuwerfen + + + + Enable pecking + Spanbrechen aktivieren + + + + The time to dwell between peck cycles + Haltezeit zwischen den Schrittzyklen + + + + Enable dwell + Pause aktivieren + + + + Calculate the tip length and subtract from final depth + Berechnung der Spitzenlänge und Abzug von der Endtiefe + + + + Controls how tool retracts Default=G98 + Steuert wie stark ein Werkzeug zurückzieht. Vorgabe: G98 + + + + The height where feed starts and height during retract tool when path is finished + Die Höhe, bei der die Positionierbewegung beginnt und der Rückzug am Bahnende durchgeführt wird + + + + Controls how tool retracts Default=G99 + Steuert, wie das Werkzeug zurückfährt Standard=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + Erweiterung der Bohrtiefe + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Drehung aktivieren, um Zugriff auf Aussparungen/Bereiche zu erhalten, die nicht normal zur Z-Achse sind. + + + + Reverse direction of pocket operation. + Richtung der Taschenoperation umkehren. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Winkel umkehren. Beispiel: -22.5 -> 22.5 Grad. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientierungsebene des CNC-Pfades @@ -584,49 +479,86 @@ Exclude milling raised areas inside the face. - - Calculate roll-on to path - Berechne die Anfahrt zur Kontur + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Kleinere Werte liefern ein feineres, genaueres Netz. Geringere Werte erhöhen die Verarbeitungszeit +erheblich. - - Calculate roll-off from path - Berechne die Wegfahrt von der Kontur + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Kleinere Werte liefern ein feineres, genaueres Netz. Geringere Werte erhöhen die Verarbeitungszeit +nur unwesentlich. - - Keep the Tool Down in Path - Halte das Werkzeug im Pfad + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Verwende Radiuskompensation / Werkzeugbahnkorrektur G41 / G42 + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. - - Length or Radius of the approach - Länge oder Radius der Anfahrt + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. - - Extends LeadIn distance - Extends LeadIn distance + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - Extends LeadOut distance - Extends LeadOut distance + + The base object this collision refers to + Das Basisobjekt auf das sich diese Kollision bezieht - - Perform plunges with G0 - Schnelles Eintauchen mit G0 + + Enter custom start point for slot path. + Gib den benutzerdefinierten Startpunkt für die Nute ein. - - Apply LeadInOut to layers within an operation - Apply LeadInOut to layers within an operation + + Enter custom end point for slot path. + Gib den benutzerdefinierten Endpunkt für die Nute ein. + + + + Positive extends the beginning of the path, negative shortens. + Positiv erweitert den Anfang des Pfades, negativ verkürzt ihn. + + + + Positive extends the end of the path, negative shortens. + Positiv erweitert das Ende des Pfades, negativ verkürzt es. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Aktivieren, um die Schnittrichtung der Nute umzukehren. @@ -644,29 +576,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X-Offset zwischen Werkzeug und Sonde + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Die Richtung, die der Werkzeugweg um das Teil beschreibt. Im Uhrzeigersinn (CW) oder entgegen des Uhrzeigersinns (CCW) - - Y offset between tool and probe - Y-Offset zwischen Werkzeug und Sonde + + Extra offset to apply to the operation. Direction is operation dependent. + Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. - - Number of points to probe in X direction - Anzahl der Sondierungspunkte in X-Richtung + + Start pocketing at center or boundary + Tasche im Mittelpunkt oder am Rand starten - - Number of points to probe in Y direction - Anzahl der Sondierungspunkte in Y-Richtung + + Percent of cutter diameter to step over on each pass + Faktor für die seitliche Zustellung - - The output location for the probe data to be written - Der Ausgabeort für die zu schreibenden Sondendaten + + Angle of the zigzag pattern + Winkel des Zick-Zack Musters + + + + Clearing pattern to use + Ausräummuster + + + + Use 3D Sorting of Path + 3D-Sortierung des Pfades verwenden + + + + Attempts to avoid unnecessary retractions. + Nach Möglichkeit unnötige Rückzüge vermeiden. + + + + Add Optional or Mandatory Stop to the program + Ein optionaler oder obligatorischer Programmstop + + + + Pattern method + Muster-Methode + + + + Extend the profile clearing beyond the Extra Offset. + Vergrößern Sie die Profilverkleinerung über den Extra Offset hinaus. + + + + Controls how tool moves around corners. Default=Round + Kontrolliert wie sich das Werkzeug um Ecken bewegt. Standard=rund + + + + Maximum distance before a miter join is truncated + Maximale Entfernung, bevor Gehrungsverbindungen abgeschnitten werden + + + + Extra value to stay away from final profile- good for roughing toolpath + Aufmaß zum Endprofil - Geeignet für die schruppende Vor-Bearbeitung + + + + Profile holes as well as the outline + Sowohl Löcher im Profil als auch die Aussenlinie + + + + Profile the outline + Kontur profilieren + + + + Profile round holes + Runde Profillöcher + + + + Side of edge that tool should cut + Die Seite der Kante, welche das Werkzeug schneiden soll + + + + Make True, if using Cutter Radius Compensation + Auf Wahr setzen, wenn die Fräser-Radiuskompensation verwendet werden soll @@ -889,11 +891,274 @@ Create custom gcode snippet - Create custom gcode snippet + Benutzerdefiniertes gcode-Snippet erstellen Path + + + Edit + Bearbeiten + + + + %s is not a Base Model object of the job %s + %s ist kein Basismodellobjekt des Jobs %s + + + + Base shape %s already in the list + Basisform %s ist bereits auf der Liste + + + + Ignoring vertex + Ignoriere Knoten + + + + Didn't find job %s + Job %s nicht gefunden + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Ungültiger Schneidenwinkel %.2f muß < 90° und > = 0° sein + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Spanwinkel (%.2f) führt zu negative Länge der Werkzeugspitze + + + + No parent job found for operation. + Kein Auftrag für die Anwendung gefunden. + + + + Parent job %s doesn't have a base object + Der Jab %s hat kein Basis Objekt + + + + No coolant property found. Please recreate operation. + No coolant property found. Please recreate operation. + + + + No Tool Controller is selected. We need a tool to build a Path. + Es ist kein Werkzeug-Controller ausgewählt. Es wird einer benötigt um die Bewegungsbahn(en) zu berechnen. + + + + No Tool found or diameter is zero. We need a tool to build a Path. + Es ist kein Werkzeug-Controller ausgewählt oder der Werkzegdurchmesser ist null. Es wird einer benötigt um die Bewegungsbahn zu berechnen. + + + + No Tool Controller selected. + Kein Werkzeug-Controller ausgewählt. + + + + Tool Error + Werkzeug Fehler + + + + Tool Controller feedrates required to calculate the cycle time. + Der Werkzeug-Controller benötigt eine Vorschubgeschwindigkeit um die Bearbeitungszeit zu berechnen. + + + + Feedrate Error + Fehler Vorschubsgeschwindigkeit + + + + Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. + Füge dem Werkzeug-Controller im Einrichtungsblatt Eilgangsgeschwindigkeiten für eine höhere Genauigkeit der Bearbeitungszeiten hinzu. + + + + Cycletime Error + Fehler beim berechnen der Bearbeitungszeit + + + + Base object %s.%s already in the list + Base object %s.%s already in the list + + + + Base object %s.%s rejected by operation + Base object %s.%s rejected by operation + + + + Heights + Höhen + + + + AreaOp Operation + "AreaOp" Arbeitsschritt + + + + Uncreate AreaOp Operation + Rückgängigmachen des "AreaOp" Arbeitsschrittes + + + + Pick Start Point + Wählen Sie den Startpunkt + + + + +<br>Pocket is based on extruded surface. + +<br>Vertiefung basiert auf extrudierter Oberfläche. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Der Boden der Vertiefung könnte nicht planar sein und/oder nicht normal zur Drehachse stehen. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D Vertiefungsboden ist für diesen Vorgang NICHT verfügbar</i>. + + + + Face appears misaligned after initial rotation. + Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. + + + + Multiple faces in Base Geometry. + Mehrere Oberflächen in der Basisgeometrie. + + + + Depth settings will be applied to all faces. + Tiefeneinstellungen werden auf alle Teilflächen angewendet. + + + + EnableRotation property is 'Off'. + Die Eigenschaft "Rotation zulassen" ist deaktiviert. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. + + + + Processing subs individually ... + Einzelne Bearbeitung von Unterteilen ... + + + + Depth Warning + Warnung - ungeeignete Tiefenangabe + + + + Verify final depth of pocket shaped by vertical faces. + Prüfe die sich ergebende Tiefe der Tasche, die durch vertikale Flächen geformt wird. + + + + Processing model as a whole ... + Verarbeite Modell als Ganzes ... + + + + Can not identify loop. + Kann keine geschlossene Kontur erkennen. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Ausgewählte(s) Element(e) benötigt 'Erlaube Rotation A(x)' für die Erreichbarkeit. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Ausgewählte(s) Element(e) benötigt 'Erlaube Rotation B(y)' für die Erreichbarkeit. + + + + List of disabled features + Liste der deaktivierten Funktionen + + + + Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + + + + Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + Funktion %s.%s lässt sich nicht als ein kreisrundes Loch verarbeiten - bitte aus der Basisgeometrie-Liste entfernen. + + + + Rotated to 'InverseAngle' to attempt access. + Rotated to 'InverseAngle' to attempt access. + + + + Always select the bottom edge of the hole when using an edge. + Always select the bottom edge of the hole when using an edge. + + + + Unable to create path for face(s). + Pfad für Fläche(n) kann nicht erstellt werden. + Engraving Operations @@ -944,269 +1209,6 @@ Supplemental Commands Zusätzliche Kommandos - - - Unable to create path for face(s). - Pfad für Fläche(n) kann nicht erstellt werden. - - - - Face appears misaligned after initial rotation. - Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. - - - - Multiple faces in Base Geometry. - Mehrere Oberflächen in der Basisgeometrie. - - - - Depth settings will be applied to all faces. - Tiefeneinstellungen werden auf alle Teilflächen angewendet. - - - - EnableRotation property is 'Off'. - Die Eigenschaft "Rotation zulassen" ist deaktiviert. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Vertiefung basiert auf extrudierter Oberfläche. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Der Boden der Vertiefung könnte nicht planar sein und/oder nicht normal zur Drehachse stehen. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D Vertiefungsboden ist für diesen Vorgang NICHT verfügbar</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. - - - - Processing subs individually ... - Einzelne Bearbeitung von Unterteilen ... - - - - Depth Warning - Warnung - ungeeignete Tiefenangabe - - - - Verify final depth of pocket shaped by vertical faces. - Prüfe die sich ergebende Tiefe der Tasche, die durch vertikale Flächen geformt wird. - - - - Processing model as a whole ... - Verarbeite Modell als Ganzes ... - - - - Can not identify loop. - Kann keine geschlossene Kontur erkennen. - - - - Edit - Bearbeiten - - - - Heights - Höhen - - - - AreaOp Operation - "AreaOp" Arbeitsschritt - - - - Uncreate AreaOp Operation - Rückgängigmachen des "AreaOp" Arbeitsschrittes - - - - Pick Start Point - Wählen Sie den Startpunkt - - - - No parent job found for operation. - Kein Auftrag für die Anwendung gefunden. - - - - Parent job %s doesn't have a base object - Der Jab %s hat kein Basis Objekt - - - - No coolant property found. Please recreate operation. - No coolant property found. Please recreate operation. - - - - No Tool Controller is selected. We need a tool to build a Path. - No Tool Controller is selected. We need a tool to build a Path. - - - - No Tool found or diameter is zero. We need a tool to build a Path. - No Tool found or diameter is zero. We need a tool to build a Path. - - - - No Tool Controller selected. - No Tool Controller selected. - - - - Tool Error - Tool Error - - - - Tool Controller feedrates required to calculate the cycle time. - Tool Controller feedrates required to calculate the cycle time. - - - - Feedrate Error - Feedrate Error - - - - Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. - Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. - - - - Cycletime Error - Cycletime Error - - - - Base object %s.%s already in the list - Base object %s.%s already in the list - - - - Base object %s.%s rejected by operation - Base object %s.%s rejected by operation - - - - %s is not a Base Model object of the job %s - %s ist kein Basismodellobjekt des Jobs %s - - - - Base shape %s already in the list - Basisform %s ist bereits auf der Liste - - - - Ignoring vertex - Ignoriere Knoten - - - - List of disabled features - Liste der deaktivierten Funktionen - - - - Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. - Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. - - - - Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - Funktion %s.%s lässt sich nicht als ein kreisrundes Loch verarbeiten - bitte aus der Basisgeometrie-Liste entfernen. - - - - Rotated to 'InverseAngle' to attempt access. - Rotated to 'InverseAngle' to attempt access. - - - - Always select the bottom edge of the hole when using an edge. - Always select the bottom edge of the hole when using an edge. - - - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. - - - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. - - - - Didn't find job %s - Job %s nicht gefunden - - - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Ungültiger Schneidenwinkel %.2f muß < 90° und > = 0° sein - - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein - - - - Cutting Edge Angle (%.2f) results in negative tool tip length - Spanwinkel (%.2f) führt zu negative Länge der Werkzeugspitze - this object already in the list @@ -1295,7 +1297,7 @@ Direction of Operation - Direction of Operation + Verfahrrichtung der Bearbeitung @@ -1315,7 +1317,7 @@ Creates a Deburr Path along Edges or around Faces - Creates a Deburr Path along Edges or around Faces + Erstellt einen Bewegungsbahn 'Entgraten' an Kanten entlag oder um Flächen herum @@ -1388,16 +1390,6 @@ PathEngrave - - - Additional base objects to be engraved - Zusätzliche Basisobjekte, die graviert werden sollen - - - - The vertex index to start the path from - Der Index des Vertex von dem aus der Pfad gestartet wird - Engrave @@ -1408,6 +1400,16 @@ Creates an Engraving Path around a Draft ShapeString Erstellt einen Gravierpfad um einen "Draft ShapeString" + + + Additional base objects to be engraved + Zusätzliche Basisobjekte, die graviert werden sollen + + + + The vertex index to start the path from + Der Index des Vertex von dem aus der Pfad gestartet wird + PathFace @@ -1464,34 +1466,44 @@ PathGui - - - %s has no property %s (%s)) - %s hat keine Eigenschaft %s (%s)) - Cannot find property %s of %s Eigenschaft %s des %s kann nicht gefunden werden. + + + %s has no property %s (%s)) + %s hat keine Eigenschaft %s (%s)) + Tool Error - Tool Error + Werkzeug Fehler Feedrate Error - Feedrate Error + Fehler Vorschubsgeschwindigkeit Cycletime Error - Cycletime Error + Fehler beim berechnen der Bearbeitungszeit PathHelix + + + Helix + Helix + + + + Creates a Path Helix object from a features of a base object + Erstellt einen Helix (gewendelten) Pfad aus der gewählten Bohrung des Basis Objekts + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1512,16 +1524,6 @@ Starting Radius Start-Radius - - - Helix - Helix - - - - Creates a Path Helix object from a features of a base object - Erstellt einen Helix (gewendelten) Pfad aus der gewählten Bohrung des Basis Objekts - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1530,6 +1532,31 @@ PathJob + + + Unsupported stock object %s + Nicht unterstützte Basisobjekt %s + + + + Unsupported stock type %s (%d) + Nicht unterstützte Basis %s (%d) + + + + Stock not from Base bound box! + Grundmaterial nicht aus einer mit der Basis verbunden Box! + + + + Stock not a box! + Grundkörper ist kein Quader + + + + Stock not a cylinder! + Basis ist kein Zylinder + The NC output file for this project @@ -1548,7 +1575,7 @@ An optional description for this job - An optional description for this job + Optionale Beschreibung für diesen Job @@ -1573,7 +1600,7 @@ Split output into multiple gcode files - Split output into multiple gcode files + Ausgabe auf mehrere gcode Dateien aufteilen @@ -1600,31 +1627,6 @@ Unsupported PathJob template version %s Nicht unterstützte Version der PathJob Vorlage %s - - - Unsupported stock object %s - Nicht unterstützte Basisobjekt %s - - - - Unsupported stock type %s (%d) - Nicht unterstützte Basis %s (%d) - - - - Stock not from Base bound box! - Grundmaterial nicht aus einer mit der Basis verbunden Box! - - - - Stock not a box! - Grundkörper ist kein Quader - - - - Stock not a cylinder! - Basis ist kein Zylinder - Solids @@ -1668,43 +1670,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Basisgeometrie - - - - Base Location - Ausgangsposition - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Die endgültige Tiefe kann für diesen Vorgang nicht geändert werden. -Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie bitte einen anderen Vorgang. - - - - Depths - Tiefen - - - - Operation - Operation - The base geometry for this operation @@ -1750,6 +1715,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b User Assigned Label Vom Benutzer vergebener Name + + + Operations Cycle Time Estimation + Operationszyklus Zeiiteinschätzung + Base locations for this operation @@ -1815,6 +1785,38 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Coolant option for this operation Kühlungsoption für diesen Vorgang + + + Base Geometry + Basisgeometrie + + + + Base Location + Ausgangsposition + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Die endgültige Tiefe kann für diesen Vorgang nicht geändert werden. +Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie bitte einen anderen Vorgang. + + + + Depths + Tiefen + + + + Operation + Operation + + + + Job Cycle Time Estimation + Zeiteinschätzung aller Zyklen im Job + PathOpGui @@ -1827,19 +1829,14 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathPocket - - Choose how to process multiple Base Geometry features. - Wählen Sie, wie mehrere Basisgeometriefunktionen verarbeitet werden sollen. + + 3D Pocket + 3D Tasche - - Pass Extension - Durchlauf-Verlängerung - - - - The distance the facing operation will extend beyond the boundary shape. - Der Abstand der Fräsoperation wird über die Begrenzung der Form ragen. + + Creates a Path 3D Pocket object from a face or faces + Erstellt ein Path Taschen Objekt anhand von einer oder mehreren Flächen @@ -1857,14 +1854,29 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Vertikale Flächen bilden keine Schleife - Ignoriert - - 3D Pocket - 3D Tasche + + Adaptive clearing and profiling + Adapatives Räumen und Profillieren - - Creates a Path 3D Pocket object from a face or faces - Erstellt ein Path Taschen Objekt anhand von einer oder mehreren Flächen + + Pass Extension + Durchlauf-Verlängerung + + + + The distance the facing operation will extend beyond the boundary shape. + Der Abstand der Fräsoperation wird über die Begrenzung der Form ragen. + + + + Choose how to process multiple Base Geometry features. + Wählen Sie, wie mehrere Basisgeometriefunktionen verarbeitet werden sollen. + + + + Final depth set below ZMin of face(s) selected. + Gesamttiefe unter ZMin von Fläche(n) ausgewählt. @@ -1891,16 +1903,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Pocket object from a face or faces Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen - - - Adaptive clearing and profiling - Adapatives Räumen und Profillieren - - - - Final depth set below ZMin of face(s) selected. - Gesamttiefe unter ZMin von Fläche(n) ausgewählt. - Generating toolpath with libarea offsets. @@ -1949,6 +1951,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathProfile + + + Profile based on face or faces + Auf eine oder mehrere Flächen basierendes Profil + Profile @@ -1962,7 +1969,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b New property added to - New property added to + Neue Eigenschaft hinzugefügt zu @@ -2019,11 +2026,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Auf eine oder mehrere Flächen basierendes Profil - Edge Profile @@ -2233,7 +2235,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b New property added to - New property added to + Neue Eigenschaft hinzugefügt zu @@ -2293,27 +2295,27 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Current tool larger than arc diameter. - Current tool larger than arc diameter. + Das aktuelle Werkzeug ist größer als ein Bogendurchmesser. Failed to determine point 1 from - Failed to determine point 1 from + Punkt 1 konnte nicht ermittelt werden von Failed to determine point 2 from - Failed to determine point 2 from + Punkt 2 konnte nicht ermittelt werden von Selected geometry not parallel. - Selected geometry not parallel. + Ausgewählte Geometrie ist nicht parallel. The selected face is not oriented vertically: - The selected face is not oriented vertically: + Die Orientierung der ausgewählten Fläche ist nicht vertikal: @@ -2431,26 +2433,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2459,7 +2441,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b New property added to - New property added to + Neue Eigenschaft hinzugefügt zu @@ -2474,7 +2456,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + Die Geometrietoleranz für diesen Job ist 0,0. @@ -2514,7 +2496,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b No JOB - No JOB + Kein JOB @@ -2529,7 +2511,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Canceled 3D Surface operation. - Canceled 3D Surface operation. + 3D Oberflächen Operation abgebrochen. @@ -2556,6 +2538,26 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Das Werkzeug für die Operation konnte nicht identifiziert werden. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2666,56 +2668,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathToolBit - - - Create Tool - Werkzeug erstellen - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Werkzeug speichern unter... - - - - Save Tool - Werkzeug speichern - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Werkzeug laden - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2756,6 +2708,56 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Chipload as per manufacturer Kopfspanungsdicke nach Hersteller + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Werkzeug erstellen + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Werkzeug speichern unter... + + + + Save Tool + Werkzeug speichern + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Werkzeug laden + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2782,6 +2784,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathToolController + + + Error updating TC: %s + Fehler beim Aktualisieren des Werkzeug Kontrollers %s + The active tool @@ -2832,11 +2839,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b The tool used by this controller Das von dieser Steuerung genutzte Werkzeug - - - Error updating TC: %s - Fehler beim Aktualisieren des Werkzeug Kontrollers %s - PathToolLibraryManager @@ -2912,7 +2914,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b New property added to - New property added to + Neue Eigenschaft hinzugefügt zu @@ -2927,7 +2929,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + Die Geometrietoleranz für diesen Job ist 0,0. @@ -2962,7 +2964,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b No JOB - No JOB + Kein JOB @@ -3220,26 +3222,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_DressupPathBoundary - - - The base path to modify - Zu ändernder Basispfad - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Das ausgewählte Objekt ist keine Bewegungsbahn - Create a Boundary dressup @@ -3265,6 +3247,26 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Zu ändernder Basispfad + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Das ausgewählte Objekt ist keine Bewegungsbahn + Path_DressupRampEntry @@ -3291,41 +3293,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_DressupTag - - - Cannot copy tags - internal error - Tags können nicht kopiert werden - interner Fehler - - - - Create a Tag dressup - Erstelle ein Haltesteg Dress-up - - - - Tag Dress-up - Haltesteg Dress-up - - - - Creates a Tag Dress-up object from a selected path - Erstellt einen mit Haltestegen versehenen Pfad aus dem gewählten Pfad - - - - Please select one path object - Bitte eine einzelne Bewegungsbahn auswählen - - - - Create Tag Dress-up - Erstelle ein Haltesteg Dress-up - - - - Holding Tag - Haltestege - The base path to modify @@ -3366,6 +3333,56 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Factor determining the # of segments used to approximate rounded tags. Faktor, der die Anzahl an Segmenten bestimmt um abgerundete Marken anzunähern. + + + Cannot insert holding tags for this path - please select a Profile path + Kann keine Haltemarken für diesen Pfad einfügen - Bitte wählen Sie einen Profilpfad aus + + + + The selected object is not a path + Das ausgewählte Objekt ist keine Bewegungsbahn + + + + Please select a Profile object + Bitte wählen Sie ein Profilpfadobjekt + + + + Holding Tag + Haltestege + + + + Cannot copy tags - internal error + Tags können nicht kopiert werden - interner Fehler + + + + Create a Tag dressup + Erstelle ein Haltesteg Dress-up + + + + Tag Dress-up + Haltesteg Dress-up + + + + Creates a Tag Dress-up object from a selected path + Erstellt einen mit Haltestegen versehenen Pfad aus dem gewählten Pfad + + + + Please select one path object + Bitte eine einzelne Bewegungsbahn auswählen + + + + Create Tag Dress-up + Erstelle ein Haltesteg Dress-up + No Base object found. @@ -3386,21 +3403,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Base Path is empty. Basispfad ist leer. - - - The selected object is not a path - Das ausgewählte Objekt ist keine Bewegungsbahn - - - - Please select a Profile object - Bitte wählen Sie ein Profilpfadobjekt - - - - Cannot insert holding tags for this path - please select a Profile path - Kann keine Haltemarken für diesen Pfad einfügen - Bitte wählen Sie einen Profilpfad aus - Path_DressupZCorrect @@ -3521,6 +3523,31 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Job + + + Job + Auftrag + + + + Creates a Path Job object + Erstellt eine Path Operation + + + + Export Template + Exportiere Vorlage + + + + Exports Path Job as a template to be used for other jobs + Exportiert den Path Job als Vorlage um sie für andere Aufträge zu verwenden + + + + Create Job + Auftrag erstellen + Edit Job @@ -3546,31 +3573,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Model Selection Modellauswahl - - - Create Job - Auftrag erstellen - - - - Job - Auftrag - - - - Creates a Path Job object - Erstellt eine Path Operation - - - - Export Template - Exportiere Vorlage - - - - Exports Path Job as a template to be used for other jobs - Exportiert den Path Job als Vorlage um sie für andere Aufträge zu verwenden - Path_OpActiveToggle @@ -3630,9 +3632,9 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Probe - - Select Output File - Ausgabedatei auswählen + + Select Probe Point File + Sondierungspunkedatei wählen @@ -3640,9 +3642,9 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Alle Dateien (*.*) - - Select Probe Point File - Sondierungspunkedatei wählen + + Select Output File + Ausgabedatei auswählen @@ -3714,7 +3716,7 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Closed loop detection failed. - Closed loop detection failed. + Erkennung einer geschlossenen Kontur fehlgeschlagen. diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.qm b/src/Mod/Path/Gui/Resources/translations/Path_el.qm index 34208a6da0..909868c476 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_el.qm and b/src/Mod/Path/Gui/Resources/translations/Path_el.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index bafa8a9d3d..125a219272 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Προσθέστε Προαιρετική ή Υποχρεωτική Διακοπή στο πρόγραμμα - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Ελέγχει τον τρόπο με τον οποίο το εργαλείο κινείται γύρω από τις γωνίες. Προεπιλογή=Κυκλικά - - - - Maximum distance before a miter join is truncated - Η μέγιστη απόσταση πριν περικοπεί μια λοξοτομή - - - - The base geometry of this toolpath - Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων - - - - Extra value to stay away from final profile- good for roughing toolpath - Επιπλέον τιμή απόστασης από το τελικό προφίλ- καλή επιλογή για την πρώτη διαμόρφωση διαδρομής εργαλείων - - - - Profile holes as well as the outline - Δημιουργήστε το προφίλ των οπών και του περιγράμματος - - - - Profile the outline - Δημιουργήστε το προφίλ του περιγράμματος - - - - Profile round holes - Δημιουργήστε το προφίλ των στρογγυλών οπών - - - - Side of edge that tool should cut - Πλευρά της ακμής που θα πρέπει να περικόψει το εργαλείο - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Το αντικείμενο που θα προσεγγιστεί με αυτό το άλμα - - - - The Z height of the hop - Το ύψος του άλματος στον άξονα Z - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης - - - - Incremental Drill depth before retracting to clear chips - Σταδιακό βάθος διάτρησης πριν την απόσυρση για τον καθαρισμό των ρινισμάτων - - - - Enable pecking - Ενεργοποίηση ραμφίσματος - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - Το ύψος όπου ξεκινά η τροφοδοσία και το ύψος απόσυρσης εργαλείου όταν η διαδρομή έχει ολοκληρωθεί - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Αριθμός Μετατόπισης Προσάρτησης - - - - Make False, to prevent operation from generating code - Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα - - - - Extra offset to apply to the operation. Direction is operation dependent. - Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. - - - - Start pocketing at center or boundary - Ξεκινήστε να δημιουργείτε εσοχή στο κέντρο ή στο όριο - - - - Percent of cutter diameter to step over on each pass - Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα - - - - Angle of the zigzag pattern - Γωνία του μοτίβου zigzag - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Επίπεδο προσανατολισμού της διαδρομής CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης + The path to be copied Η διαδρομή προς αντιγραφή + + + The base geometry of this toolpath + Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων + The tool controller that will be used to calculate the path Ο ελεγκτής εργαλείων που θα χρησιμοποιηθεί για τον υπολογισμό της διαδρομής - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Ύψος ανύψωσης κατά την διάρκεια γωνιακής ενέργειας - - Ramping Method - Μέθοδος Δημιουργίας Κεκλιμένης Επιφάνειας + + The object to be reached by this hop + Το αντικείμενο που θα προσεγγιστεί με αυτό το άλμα - - Which feed rate to use for ramping - Ποιόν ρυθμό τροφοδοσίας να χρησιμοποιήσετε για την δημιουργία κεκλιμένης επιφάνειας + + The Z height of the hop + Το ύψος του άλματος στον άξονα Z - - Custom feedrate - Προσαρμοσμένος ρυθμός τροφοδοσίας + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Tο βάθος στο οποίο ενεργοποιείται η αναδιαμόρφωση κεκλιμένης επιφάνειας. Πάνω από αυτό το σημείο δεν δημιουργούνται κεκλιμένες επιφάνειες, αλλά οι εντολές κίνησης μεταβιβάζονται όπως είναι. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Μέθοδος μοτίβου - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Αριθμός Μετατόπισης Προσάρτησης + + + + Make False, to prevent operation from generating code + Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα + + + + Ramping Method + Μέθοδος Δημιουργίας Κεκλιμένης Επιφάνειας + + + + Which feed rate to use for ramping + Ποιόν ρυθμό τροφοδοσίας να χρησιμοποιήσετε για την δημιουργία κεκλιμένης επιφάνειας + + + + Custom feedrate + Προσαρμοσμένος ρυθμός τροφοδοσίας + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Tο βάθος στο οποίο ενεργοποιείται η αναδιαμόρφωση κεκλιμένης επιφάνειας. Πάνω από αυτό το σημείο δεν δημιουργούνται κεκλιμένες επιφάνειες, αλλά οι εντολές κίνησης μεταβιβάζονται όπως είναι. + + + + Incremental Drill depth before retracting to clear chips + Σταδιακό βάθος διάτρησης πριν την απόσυρση για τον καθαρισμό των ρινισμάτων + + + + Enable pecking + Ενεργοποίηση ραμφίσματος + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Το ύψος όπου ξεκινά η τροφοδοσία και το ύψος απόσυρσης εργαλείου όταν η διαδρομή έχει ολοκληρωθεί + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Επίπεδο προσανατολισμού της διαδρομής CNC + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Ξεκινήστε να δημιουργείτε εσοχή στο κέντρο ή στο όριο - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Γωνία του μοτίβου zigzag + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Προσθέστε Προαιρετική ή Υποχρεωτική Διακοπή στο πρόγραμμα + + + + Pattern method + Μέθοδος μοτίβου + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Ελέγχει τον τρόπο με τον οποίο το εργαλείο κινείται γύρω από τις γωνίες. Προεπιλογή=Κυκλικά + + + + Maximum distance before a miter join is truncated + Η μέγιστη απόσταση πριν περικοπεί μια λοξοτομή + + + + Extra value to stay away from final profile- good for roughing toolpath + Επιπλέον τιμή απόστασης από το τελικό προφίλ- καλή επιλογή για την πρώτη διαμόρφωση διαδρομής εργαλείων + + + + Profile holes as well as the outline + Δημιουργήστε το προφίλ των οπών και του περιγράμματος + + + + Profile the outline + Δημιουργήστε το προφίλ του περιγράμματος + + + + Profile round holes + Δημιουργήστε το προφίλ των στρογγυλών οπών + + + + Side of edge that tool should cut + Πλευρά της ακμής που θα πρέπει να περικόψει το εργαλείο + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - Τρισδιάστατες Λειτουργίες - - - - Project Setup - Εγκατάσταση Έργου - - - - Tool Commands - Εντολές Εργαλείων - - - - New Operations - Νέες Λειτουργίες - - - - Path Modification - Τροποποίηση Διαδρομής - - - - Helpful Tools - Βοηθητικά Εργαλεία - - - - &Path - Διαδρομή - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Επεξεργασία - - Heights - Ύψη + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Λειτουργία AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Κατάργηση Λειτουργίας AreaOp + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Διαλέξτε Σημείο Εκκίνησης + + Didn't find job %s + Δεν βρέθηκε η εργασία %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Μη Έγκυρη Γωνία Περικοπής Ακμής %.2f, πρέπει να είναι <90° και >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Η Γωνία Περικοπής Ακμής (%.2f) θα έχει ως αποτέλεσμα αρνητικό μήκος άκρου εργαλείου @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Ύψη - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Λειτουργία AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Κατάργηση Λειτουργίας AreaOp + + + + Pick Start Point + Διαλέξτε Σημείο Εκκίνησης + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Δεν βρέθηκε η εργασία %s + + 3D Operations + Τρισδιάστατες Λειτουργίες - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Μη Έγκυρη Γωνία Περικοπής Ακμής %.2f, πρέπει να είναι <90° και >=0° + + Project Setup + Εγκατάσταση Έργου - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Εντολές Εργαλείων - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Νέες Λειτουργίες - - Cutting Edge Angle (%.2f) results in negative tool tip length - Η Γωνία Περικοπής Ακμής (%.2f) θα έχει ως αποτέλεσμα αρνητικό μήκος άκρου εργαλείου + + Path Modification + Τροποποίηση Διαδρομής + + + + Helpful Tools + Βοηθητικά Εργαλεία + + + + &Path + Διαδρομή + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - Ο δείκτης κορυφής για την εκκίνηση της διαδρομής - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Δημιουργεί μια Διαδρομή Χάραξης γύρω από ένα Πλαίσιο Συμβολοσειράς Κειμένου Προσχεδίου + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + Ο δείκτης κορυφής για την εκκίνηση της διαδρομής + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - Το %s δεν έχει καμία ιδιότητα %s (%s)) - Cannot find property %s of %s Αδυναμία εύρεσης της ιδιότητας %s του %s + + + %s has no property %s (%s)) + Το %s δεν έχει καμία ιδιότητα %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Έλικα + + + + Creates a Path Helix object from a features of a base object + Δημιουργεί ένα αντικείμενο ελικοειδούς διαδρομής από τα χαρακτηριστικά ενός αντικειμένου βάσης + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Έλικα - - - - Creates a Path Helix object from a features of a base object - Δημιουργεί ένα αντικείμενο ελικοειδούς διαδρομής από τα χαρακτηριστικά ενός αντικειμένου βάσης - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Μη υποστηριζόμενο αντικείμενο αποθέματος %s + + + + Unsupported stock type %s (%d) + Μη υποστηριζόμενος τύπος αποθέματος %s(%d) + + + + Stock not from Base bound box! + Το απόθεμα δεν είναι από το πλαίσιο οριοθέτησης Βάσης! + + + + Stock not a box! + Το απόθεμα δεν είναι κιβώτιο! + + + + Stock not a cylinder! + Το απόθεμα δεν είναι κύλινδρος! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Μη υποστηριζόμενη έκδοση προτύπου ΕργασίαςΔιαδρομής %s - - - Unsupported stock object %s - Μη υποστηριζόμενο αντικείμενο αποθέματος %s - - - - Unsupported stock type %s (%d) - Μη υποστηριζόμενος τύπος αποθέματος %s(%d) - - - - Stock not from Base bound box! - Το απόθεμα δεν είναι από το πλαίσιο οριοθέτησης Βάσης! - - - - Stock not a box! - Το απόθεμα δεν είναι κιβώτιο! - - - - Stock not a cylinder! - Το απόθεμα δεν είναι κύλινδρος! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Γεωμετρία Βάσης - - - - Base Location - Τοποθεσία Βάσης - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Βάθη - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Ετικέτα που έχει Εκχωρηθεί από τον Χρήστη + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Γεωμετρία Βάσης + + + + Base Location + Τοποθεσία Βάσης + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Βάθη + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Τρισδιάστατη Εσοχή - - Pass Extension - Επέκταση Περάσματος - - - - The distance the facing operation will extend beyond the boundary shape. - Η απόσταση κατά την οποία θα επεκταθεί η λειτουργία κατασκευής όψεων πέρα από το όριο του σχήματος. + + Creates a Path 3D Pocket object from a face or faces + Δημιουργεί μια Τρισδιάστατη Εσοχή Διαδρομής από μια όψη ή από όψεις @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Κάθετες όψεις δεν σχηματίζουν βρόχο - πραγματοποιείται παράβλεψη - - 3D Pocket - Τρισδιάστατη Εσοχή + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Δημιουργεί μια Τρισδιάστατη Εσοχή Διαδρομής από μια όψη ή από όψεις + + Pass Extension + Επέκταση Περάσματος + + + + The distance the facing operation will extend beyond the boundary shape. + Η απόσταση κατά την οποία θα επεκταθεί η λειτουργία κατασκευής όψεων πέρα από το όριο του σχήματος. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Σφάλμα κατά την ενημέρωση του TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Το εργαλείο που χρησιμοποιείται από αυτόν τον ελεγκτή - - - Error updating TC: %s - Σφάλμα κατά την ενημέρωση του TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Η διαδρομή βάσης προς τροποποίηση - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Η διαδρομή βάσης προς τροποποίηση + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Το επιλεγμένο αντικείμενο δεν είναι διαδρομή + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Δημιουργήστε μια αναδιαμόρφωση Προσάρτησης - - - - Tag Dress-up - Αναδιαμόρφωση Προσάρτησης - - - - Creates a Tag Dress-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Προσάρτησης από μια επιλεγμένη διαδρομή - - - - Please select one path object - Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - - - - Create Tag Dress-up - Δημιουργήστε Αναδιαμόρφωση Προσάρτησης - - - - Holding Tag - Προσάρτηση Στήριξης - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + Το επιλεγμένο αντικείμενο δεν είναι διαδρομή + + + + Please select a Profile object + Παρακαλώ επιλέξτε ένα αντικείμενο προφίλ + + + + Holding Tag + Προσάρτηση Στήριξης + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Δημιουργήστε μια αναδιαμόρφωση Προσάρτησης + + + + Tag Dress-up + Αναδιαμόρφωση Προσάρτησης + + + + Creates a Tag Dress-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Προσάρτησης από μια επιλεγμένη διαδρομή + + + + Please select one path object + Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής + + + + Create Tag Dress-up + Δημιουργήστε Αναδιαμόρφωση Προσάρτησης + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Η Διαδρομή βάσης είναι κενή. - - - The selected object is not a path - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - - - Please select a Profile object - Παρακαλώ επιλέξτε ένα αντικείμενο προφίλ - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Εργασία + + + + Creates a Path Job object + Δημιουργεί ένα αντικείμενο Εργασίας Διαδρομής + + + + Export Template + Εξαγωγή Προτύπου + + + + Exports Path Job as a template to be used for other jobs + Εξαγωγή Εργασίας Διαδρομής ως πρότυπο προς χρήση για άλλες εργασίες + + + + Create Job + Δημιουργία Εργασίας + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Δημιουργία Εργασίας - - - - Job - Εργασία - - - - Creates a Path Job object - Δημιουργεί ένα αντικείμενο Εργασίας Διαδρομής - - - - Export Template - Εξαγωγή Προτύπου - - - - Exports Path Job as a template to be used for other jobs - Εξαγωγή Εργασίας Διαδρομής ως πρότυπο προς χρήση για άλλες εργασίες - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Επιλέξτε Αρχείο Εξόδου + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Όλα τα αρχεία (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Επιλέξτε Αρχείο Εξόδου diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm index 83288bd125..3c9238a5d7 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 8a7cd9f3a3..3d59c6b48a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Añadir paro obligatorio u opcional al programa - - - - The base object this collision refers to - El objeto base a que esta colisión se refiere - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - La dirección en la que la ruta de herramienta debe ir alrededor de la pieza Sentido horario (CW) o Sentido Antihorario (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extender el espacio de separación del perfil más allá de la compensación de distancia extra. - - - - Set the stepover percentage, based on the tool's diameter. - Establecer el porcentaje de pasada, basado en el diámetro de la herramienta. - - - - Controls how tool moves around corners. Default=Round - Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo - - - - Maximum distance before a miter join is truncated - Distancia máxima antes de que una Unión de inglete este truncada - - - - The base geometry of this toolpath - La geometría base de esta trayectoria de herramienta - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor adicional a alejarse del perfil final-bueno para trayectoria de herramienta de desbaste - - - - Profile holes as well as the outline - Perfilar agujeros así como su contorno - - - - Profile the outline - Perfil del contorno - - - - Profile round holes - Agujeros redondos de perfil - - - - Side of edge that tool should cut - Lado del borde que la herramienta debe cortar - - - - Make True, if using Cutter Radius Compensation - Hacer verdadero, sí se utiliza la compensación de cortador de radio - - - - Reverse direction of pocket operation. - Dirección inversa de la operación de vaciado. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Invertir el ángulo. Ejemplo: -22.5 -> 22.5 grados. - - - - Attempt the inverse angle for face access if original rotation fails. - Intenta el ángulo inverso para el acceso a la cara si la rotación original falla. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Forzar la profundidad Z de la cara seleccionada como el valor más bajo para la profundidad final. Se observarán valores de usuario más altos. - - - - The object to be reached by this hop - El objeto que se alcanzará por este salto - - - - The Z height of the hop - La altura Z del salto - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Habilita la rotación para obtener acceso a vaciados/áreas no normales al eje Z. - Show the temporary path construction objects when module is in DEBUG mode. Mostrar los objetos temporales de construcción de rutas cuando el módulo está en modo DEBUG. - - - Enter custom start point for slot path. - Introduzca el punto de inicio personalizado para la trayectoria del hueco. - - - - Enter custom end point for slot path. - Introduzca el punto final personalizado para la trayectoria del hueco. - - - - Set the geometric clearing pattern to use for the operation. - Ajustar el patrón de limpieza geométrica a usar para la operación. - - - - Positive extends the beginning of the path, negative shortens. - Un valor positivo extiende el comienzo de la trayectoria, un valor negativo la acorta. - - - - Positive extends the end of the path, negative shortens. - Un valor positivo extiende el final de la trayectoria, un valor negativo la acorta. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Completa la operación en un solo paso a la profundidad, o en múltiples pasadas hasta la profundidad final. - - - - Choose the path orientation with regard to the feature(s) selected. - Elija la orientación de la trayectoria teniendo en cuenta la(s) característica(s) seleccionada(s). - - - - Choose what point to use on the first selected feature. - Elija el punto a utilizar en el primer elemento seleccionado. - - - - Choose what point to use on the second selected feature. - Elija el punto a utilizar en el segundo elemento seleccionado. - - - - For arcs/circlular edges, offset the radius for the path. - Para arcos/bordes circulares, desplazar el radio de la trayectoria. - - - - Enable to reverse the cut direction of the slot path. - Activar para invertir la dirección de corte de la trayectoria del hueco. - - - - The custom start point for the path of this operation - El punto de inicio personalizado para la ruta de esta operación - - - - Make True, if specifying a Start Point - Hacer verdadero, sí especifica un punto inicial - - - - Incremental Drill depth before retracting to clear chips - Profundidad de taladrado incremental antes de retraerse para limpiar las virutas - - - - Enable pecking - Habilitar punteado - - - - The time to dwell between peck cycles - El tiempo de demora entre los ciclos de re-taladrado - - - - Enable dwell - Activar la espera - - - - Calculate the tip length and subtract from final depth - Calcular la longitud de la punta y restar desde profundidad final - - - - Controls how tool retracts Default=G98 - Controla cómo la herramienta se retrae Por defecto=G98 - - - - The height where feed starts and height during retract tool when path is finished - La altura donde el avance empieza y altura durante herramienta retrae cuando la ruta esta terminada - - - - Controls how tool retracts Default=G99 - Controla cómo la herramienta se retrae Por defecto = G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - La altura donde comienza la alimentación y altura durante la retracción de herramienta cuando finaliza la ruta mientras se está en una operación de punteo - - - - How far the drill depth is extended - Cómo de lejos se extiende la profundidad del taladro - - - - Fixture Offset Number - Numero de desface de la fijación - - - - Make False, to prevent operation from generating code - Hacer falso, para evitar la operación generación de código - - - - Extra offset to apply to the operation. Direction is operation dependent. - Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. - - - - Start pocketing at center or boundary - Empezar vaciando el centro o el limite - - - - Percent of cutter diameter to step over on each pass - Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada - - - - Angle of the zigzag pattern - Ángulo del patrón zigzag - - - - Clearing pattern to use - Patrón de limpieza a utilizar - - - - Use 3D Sorting of Path - Usar clasificación 3D de ruta - - - - Attempts to avoid unnecessary retractions. - Intenta evitar retracciones innecesarias. - - - - Orientation plane of CNC path - Plano de orientación de la ruta CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Establezca la dirección de la herramienta de corte para enganchar el material: De subida (ClockWise) o Convencional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Ajustar el patrón de limpieza geométrica a usar para la operación. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Definir el desplazamiento de profundidad del eje Z para la superficie objetivo. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Completa la operación en un solo paso a la profundidad, o en múltiples pasadas hasta la profundidad final. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Establece la resolución de muestreo. Los valores más pequeños aumentan rápidamente el tiempo de procesamiento. + + + Set the stepover percentage, based on the tool's diameter. + Establecer el porcentaje de pasada, basado en el diámetro de la herramienta. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Comentarios: los tres gaps más pequeños identificados en la geometría de la ruta. + + + The custom start point for the path of this operation + El punto de inicio personalizado para la ruta de esta operación + + + + Make True, if specifying a Start Point + Hacer verdadero, sí especifica un punto inicial + The path to be copied La trayectoria a ser copiada + + + The base geometry of this toolpath + La geometría base de esta trayectoria de herramienta + The tool controller that will be used to calculate the path El controlador de la herramienta que se utilizará para calcular la trayectoria - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños incrementan mucho el tiempo de procesamiento. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Seleccione el algoritmo a utilizar: OCL Dropcutter*, o Experimental (no basado en OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Establecer para borrar la última capa de una operación `Multi-pass`. - - - - Ignore outer waterlines above this height. - Ignorar líneas de agua exterior sobre esta altura. - The base path to modify @@ -534,54 +269,39 @@ Altura a levantar durante la acción de la esquina - - Ramping Method - Método de rampa + + The object to be reached by this hop + El objeto que se alcanzará por este salto - - Which feed rate to use for ramping - Que velocidad utilizar para movimiento en rampa de avance + + The Z height of the hop + La altura Z del salto - - Custom feedrate - Avance personalizado + + X offset between tool and probe + Desplazamiento en X entre herramienta y la sonda - - Custom feed rate - Avance personalizado + + Y offset between tool and probe + Desplazamiento en Y entre herramienta y la sonda - - Should the dressup ignore motion commands above DressupStartDepth - En caso de que el Dressup ignore los comandos de movimiento arriba de DressupStartDepth + + Number of points to probe in X direction + Número de puntos a sondear en dirección X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Profundidad donde está habilitado el dressup de rampa. Por encima de este no se generaron rampas y comandos de movimiento de paso similares. + + Number of points to probe in Y direction + Número de puntos a sondear en dirección Y - - Pattern method - Método de patrón - - - - Shape to use for calculating Boundary - Forma a utilizar para calcular el límite - - - - Clear edges of surface (Only applicable to BoundBox) - Borrar aristas de la superficie (sólo aplicable a BoundBox) - - - - Exclude milling raised areas inside the face. - Excluir las zonas de fresado ascendente dentro de la cara. + + The output location for the probe data to be written + La ubicación de salida para los datos de sonda a ser escrita @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Aplicar LeadInOut a las capas dentro de una operación + + + Fixture Offset Number + Numero de desface de la fijación + + + + Make False, to prevent operation from generating code + Hacer falso, para evitar la operación generación de código + + + + Ramping Method + Método de rampa + + + + Which feed rate to use for ramping + Que velocidad utilizar para movimiento en rampa de avance + + + + Custom feedrate + Avance personalizado + + + + Custom feed rate + Avance personalizado + + + + Should the dressup ignore motion commands above DressupStartDepth + En caso de que el Dressup ignore los comandos de movimiento arriba de DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Profundidad donde está habilitado el dressup de rampa. Por encima de este no se generaron rampas y comandos de movimiento de paso similares. + + + + Incremental Drill depth before retracting to clear chips + Profundidad de taladrado incremental antes de retraerse para limpiar las virutas + + + + Enable pecking + Habilitar punteado + + + + The time to dwell between peck cycles + El tiempo de demora entre los ciclos de re-taladrado + + + + Enable dwell + Activar la espera + + + + Calculate the tip length and subtract from final depth + Calcular la longitud de la punta y restar desde profundidad final + + + + Controls how tool retracts Default=G98 + Controla cómo la herramienta se retrae Por defecto=G98 + + + + The height where feed starts and height during retract tool when path is finished + La altura donde el avance empieza y altura durante herramienta retrae cuando la ruta esta terminada + + + + Controls how tool retracts Default=G99 + Controla cómo la herramienta se retrae Por defecto = G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + La altura donde comienza la alimentación y altura durante la retracción de herramienta cuando finaliza la ruta mientras se está en una operación de punteo + + + + How far the drill depth is extended + Cómo de lejos se extiende la profundidad del taladro + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Habilita la rotación para obtener acceso a vaciados/áreas no normales al eje Z. + + + + Reverse direction of pocket operation. + Dirección inversa de la operación de vaciado. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Invertir el ángulo. Ejemplo: -22.5 -> 22.5 grados. + + + + Attempt the inverse angle for face access if original rotation fails. + Intenta el ángulo inverso para el acceso a la cara si la rotación original falla. + + + + Orientation plane of CNC path + Plano de orientación de la ruta CNC + + + + Shape to use for calculating Boundary + Forma a utilizar para calcular el límite + + + + Clear edges of surface (Only applicable to BoundBox) + Borrar aristas de la superficie (sólo aplicable a BoundBox) + + + + Exclude milling raised areas inside the face. + Excluir las zonas de fresado ascendente dentro de la cara. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños incrementan mucho el tiempo de procesamiento. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Seleccione el algoritmo a utilizar: OCL Dropcutter*, o Experimental (no basado en OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Establecer para borrar la última capa de una operación `Multi-pass`. + + + + Ignore outer waterlines above this height. + Ignorar líneas de agua exterior sobre esta altura. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Forzar la profundidad Z de la cara seleccionada como el valor más bajo para la profundidad final. Se observarán valores de usuario más altos. + + + + The base object this collision refers to + El objeto base a que esta colisión se refiere + + + + Enter custom start point for slot path. + Introduzca el punto de inicio personalizado para la trayectoria del hueco. + + + + Enter custom end point for slot path. + Introduzca el punto final personalizado para la trayectoria del hueco. + + + + Positive extends the beginning of the path, negative shortens. + Un valor positivo extiende el comienzo de la trayectoria, un valor negativo la acorta. + + + + Positive extends the end of the path, negative shortens. + Un valor positivo extiende el final de la trayectoria, un valor negativo la acorta. + + + + Choose the path orientation with regard to the feature(s) selected. + Elija la orientación de la trayectoria teniendo en cuenta la(s) característica(s) seleccionada(s). + + + + Choose what point to use on the first selected feature. + Elija el punto a utilizar en el primer elemento seleccionado. + + + + Choose what point to use on the second selected feature. + Elija el punto a utilizar en el segundo elemento seleccionado. + + + + For arcs/circlular edges, offset the radius for the path. + Para arcos/bordes circulares, desplazar el radio de la trayectoria. + + + + Enable to reverse the cut direction of the slot path. + Activar para invertir la dirección de corte de la trayectoria del hueco. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Procese el modelo y el stock en una operación sin Geometría Base seleccionada. - - X offset between tool and probe - Desplazamiento en X entre herramienta y la sonda + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + La dirección en la que la ruta de herramienta debe ir alrededor de la pieza Sentido horario (CW) o Sentido Antihorario (CCW) - - Y offset between tool and probe - Desplazamiento en Y entre herramienta y la sonda + + Extra offset to apply to the operation. Direction is operation dependent. + Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. - - Number of points to probe in X direction - Número de puntos a sondear en dirección X + + Start pocketing at center or boundary + Empezar vaciando el centro o el limite - - Number of points to probe in Y direction - Número de puntos a sondear en dirección Y + + Percent of cutter diameter to step over on each pass + Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada - - The output location for the probe data to be written - La ubicación de salida para los datos de sonda a ser escrita + + Angle of the zigzag pattern + Ángulo del patrón zigzag + + + + Clearing pattern to use + Patrón de limpieza a utilizar + + + + Use 3D Sorting of Path + Usar clasificación 3D de ruta + + + + Attempts to avoid unnecessary retractions. + Intenta evitar retracciones innecesarias. + + + + Add Optional or Mandatory Stop to the program + Añadir paro obligatorio u opcional al programa + + + + Pattern method + Método de patrón + + + + Extend the profile clearing beyond the Extra Offset. + Extender el espacio de separación del perfil más allá de la compensación de distancia extra. + + + + Controls how tool moves around corners. Default=Round + Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo + + + + Maximum distance before a miter join is truncated + Distancia máxima antes de que una Unión de inglete este truncada + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor adicional a alejarse del perfil final-bueno para trayectoria de herramienta de desbaste + + + + Profile holes as well as the outline + Perfilar agujeros así como su contorno + + + + Profile the outline + Perfil del contorno + + + + Profile round holes + Agujeros redondos de perfil + + + + Side of edge that tool should cut + Lado del borde que la herramienta debe cortar + + + + Make True, if using Cutter Radius Compensation + Hacer verdadero, sí se utiliza la compensación de cortador de radio @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operaciones de grabado - - - - 3D Operations - Operaciones 3D - - - - Project Setup - Configuración del proyecto - - - - Tool Commands - Comandos de herramienta - - - - New Operations - Nuevas Operaciones - - - - Path Modification - Modificación de ruta - - - - Helpful Tools - Herramientas útiles - - - - &Path - &Trayectoria - - - - Path Dressup - Aspecto de Ruta - - - - Supplemental Commands - Comandos suplementarios - - - - Unable to create path for face(s). - No se puede crear la ruta para la cara(s). - - - - Face appears misaligned after initial rotation. - La cara parece estar mal alineada después de la rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar la propiedad 'InverseAngle' y volver a calcular. - - - - Multiple faces in Base Geometry. - Multiples caras en Geometría Base. - - - - Depth settings will be applied to all faces. - La configuración de profundidad se aplicará a todas las caras. - - - - EnableRotation property is 'Off'. - La Propiedad ActivarRotacion es 'Off'. - - - - Rotated to inverse angle. - Rotado al ángulo inverso. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Las funcional(es) seleccionada(s) requieren 'Activar rotación: A(x)' para acceso. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Característica(s) seleccionada(s) requieren 'Activar Rotación: B(y)' para acceso. - - - - -<br>Pocket is based on extruded surface. - -<br>El vaciado se basa en la superficie extruida. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>La parte inferior de la cavidad podría ser no-planar y/o no es normal que el eje del husillo. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>El fondo de la cavidad 3D no está disponible en esta operación</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Considere alternar la propiedad InverseAngle y volver a calcular la operación. - - - - Processing subs individually ... - Procesando subs individualmente ... - - - - Depth Warning - Advertencia de profundidad - - - - Verify final depth of pocket shaped by vertical faces. - Verificar la profundidad final del vaciado formado de caras verticales. - - - - Processing model as a whole ... - Procesando modelo en su conjunto ... - - - - Can not identify loop. - No se puede identificar el bucle. - Edit Editar - - Heights - Alturas + + %s is not a Base Model object of the job %s + %s No es un objeto del modelo de base del trabajo %s - - AreaOp Operation - Operación AreaOp + + Base shape %s already in the list + Forma base %s ya en la lista - - Uncreate AreaOp Operation - Sin crear operación AreaOp + + Ignoring vertex + Ignorando vértice - - Pick Start Point - Elegir Punto de Inicio + + Didn't find job %s + No encontro el trabajo %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo de corte no válido %.2f, debe ser >0° y <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Angulo de esquina de corte (%.2f) resulta en de una longitud de punta de la herramienta negativa @@ -1133,19 +1005,127 @@ Objeto base %s.%s rechazado por operación - - %s is not a Base Model object of the job %s - %s No es un objeto del modelo de base del trabajo %s + + Heights + Alturas - - Base shape %s already in the list - Forma base %s ya en la lista + + AreaOp Operation + Operación AreaOp - - Ignoring vertex - Ignorando vértice + + Uncreate AreaOp Operation + Sin crear operación AreaOp + + + + Pick Start Point + Elegir Punto de Inicio + + + + +<br>Pocket is based on extruded surface. + +<br>El vaciado se basa en la superficie extruida. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>La parte inferior de la cavidad podría ser no-planar y/o no es normal que el eje del husillo. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>El fondo de la cavidad 3D no está disponible en esta operación</i>. + + + + Face appears misaligned after initial rotation. + La cara parece estar mal alineada después de la rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar la propiedad 'InverseAngle' y volver a calcular. + + + + Multiple faces in Base Geometry. + Multiples caras en Geometría Base. + + + + Depth settings will be applied to all faces. + La configuración de profundidad se aplicará a todas las caras. + + + + EnableRotation property is 'Off'. + La Propiedad ActivarRotacion es 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Considere alternar la propiedad InverseAngle y volver a calcular la operación. + + + + Processing subs individually ... + Procesando subs individualmente ... + + + + Depth Warning + Advertencia de profundidad + + + + Verify final depth of pocket shaped by vertical faces. + Verificar la profundidad final del vaciado formado de caras verticales. + + + + Processing model as a whole ... + Procesando modelo en su conjunto ... + + + + Can not identify loop. + No se puede identificar el bucle. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + No está disponible un inicio adaptativo plano. El no-planar se intentará. + + + + The non-planar adaptive start is also unavailable. + El inicio adaptativo no-planar tampoco está disponible. + + + + Rotated to inverse angle. + Rotado al ángulo inverso. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Las funcional(es) seleccionada(s) requieren 'Activar rotación: A(x)' para acceso. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Característica(s) seleccionada(s) requieren 'Activar Rotación: B(y)' para acceso. @@ -1173,39 +1153,59 @@ Seleccione siempre el borde inferior del agujero cuando utilice una arista. - - A planar adaptive start is unavailable. The non-planar will be attempted. - No está disponible un inicio adaptativo plano. El no-planar se intentará. + + Unable to create path for face(s). + No se puede crear la ruta para la cara(s). - - The non-planar adaptive start is also unavailable. - El inicio adaptativo no-planar tampoco está disponible. + + Engraving Operations + Operaciones de grabado - - Didn't find job %s - No encontro el trabajo %s + + 3D Operations + Operaciones 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + Project Setup + Configuración del proyecto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo de corte no válido %.2f, debe ser >0° y <=180° + + Tool Commands + Comandos de herramienta - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + + New Operations + Nuevas Operaciones - - Cutting Edge Angle (%.2f) results in negative tool tip length - Angulo de esquina de corte (%.2f) resulta en de una longitud de punta de la herramienta negativa + + Path Modification + Modificación de ruta + + + + Helpful Tools + Herramientas útiles + + + + &Path + &Trayectoria + + + + Path Dressup + Aspecto de Ruta + + + + Supplemental Commands + Comandos suplementarios @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Objetos base adicionales para ser grabados - - - - The vertex index to start the path from - El índice de vértice para iniciar trayectoria desde - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Crea una trayectoria de grabado alrededor de un croquis de cadena de texto + + + Additional base objects to be engraved + Objetos base adicionales para ser grabados + + + + The vertex index to start the path from + El índice de vértice para iniciar trayectoria desde + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s no tiene ninguna propiedad %s (%s)) - Cannot find property %s of %s No puede encontrar propiedad %s de %s + + + %s has no property %s (%s)) + %s no tiene ninguna propiedad %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Crea un objeto de trayectoria de hélice de características de un objeto base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Radio inicial - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Crea un objeto de trayectoria de hélice de características de un objeto base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Tipo de objeto stock no soportado %s + + + + Unsupported stock type %s (%d) + No soportado tipo stock %s (%d) + + + + Stock not from Base bound box! + ¡Stock no desde la Base de caja atada! + + + + Stock not a box! + No es una caja stock! + + + + Stock not a cylinder! + No es un cilindro stock! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s No soportada plantilla PathJob versión %s - - - Unsupported stock object %s - Tipo de objeto stock no soportado %s - - - - Unsupported stock type %s (%d) - No soportado tipo stock %s (%d) - - - - Stock not from Base bound box! - ¡Stock no desde la Base de caja atada! - - - - Stock not a box! - No es una caja stock! - - - - Stock not a cylinder! - No es un cilindro stock! - Solids @@ -1669,42 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Estimación del Tiempo de Ciclo de Tarea - - - - Operations Cycle Time Estimation - Estimación del Tiempo del Ciclo de Operaciones - - - - Base Geometry - Base de la geometría - - - - Base Location - Ubicación base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth no se puede modificar para esta operación. Si es necesario ajustar manualmente el FinalDepth por favor, seleccione una operación diferente. - - - - Depths - Profundidades - - - - Operation - Operación - The base geometry for this operation @@ -1750,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Etiqueta de usuario asignado + + + Operations Cycle Time Estimation + Estimación del Tiempo del Ciclo de Operaciones + Base locations for this operation @@ -1815,6 +1784,37 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Opción de Refrigerante para esta operación + + + Base Geometry + Base de la geometría + + + + Base Location + Ubicación base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth no se puede modificar para esta operación. Si es necesario ajustar manualmente el FinalDepth por favor, seleccione una operación diferente. + + + + Depths + Profundidades + + + + Operation + Operación + + + + Job Cycle Time Estimation + Estimación del Tiempo de Ciclo de Tarea + PathOpGui @@ -1827,19 +1827,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Elija cómo procesar múltiples características de Geometría Base. + + 3D Pocket + Vaciado 3D - - Pass Extension - Ampliación de pasada - - - - The distance the facing operation will extend beyond the boundary shape. - La distancia de la operación de refrendado se extenderá más allá de la forma límite. + + Creates a Path 3D Pocket object from a face or faces + Crea un objeto trayectoria de vaciado 3D desde una cara o caras @@ -1857,14 +1852,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Las caras verticales no forman un ciclo - ignorar - - 3D Pocket - Vaciado 3D + + Adaptive clearing and profiling + Limpieza y perfilado adaptativo - - Creates a Path 3D Pocket object from a face or faces - Crea un objeto trayectoria de vaciado 3D desde una cara o caras + + Pass Extension + Ampliación de pasada + + + + The distance the facing operation will extend beyond the boundary shape. + La distancia de la operación de refrendado se extenderá más allá de la forma límite. + + + + Choose how to process multiple Base Geometry features. + Elija cómo procesar múltiples características de Geometría Base. + + + + Final depth set below ZMin of face(s) selected. + Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). @@ -1891,16 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea la trayectoria de un objeto de vaciado desde una cara o caras - - - Adaptive clearing and profiling - Limpieza y perfilado adaptativo - - - - Final depth set below ZMin of face(s) selected. - Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). - Generating toolpath with libarea offsets. @@ -1949,6 +1949,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Perfil basado en la cara o caras + Profile @@ -2019,11 +2024,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. Para los bordes abiertos, verifique la Profundidad Final para esta operación. - - - Profile based on face or faces - Perfil basado en la cara o caras - Edge Profile @@ -2434,26 +2434,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Error al identificar la herramienta de operación. - - - - Failed to map selected tool to an OCL tool type. - No se pudo asignar la herramienta seleccionada a un tipo de herramienta OCL. - - - - Failed to translate active tool to OCL tool type. - Error al traducir la herramienta activa al tipo de herramienta OCL. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - Herramienta OCL no disponible. No se puede determinar si la herramienta de corte tiene la inclinación disponible. - This operation requires OpenCamLib to be installed. @@ -2537,28 +2517,48 @@ If it is necessary to set the FinalDepth manually please select a different oper No profile geometry shape returned. - No profile geometry shape returned. + No se ha retornado ninguna forma de geometría de perfil. No profile path geometry returned. - No profile path geometry returned. + No se devolvió la geometría de la ruta del perfil. No clearing shape returned. - No clearing shape returned. + No se retornó ninguna forma de limpieza. No clearing path geometry returned. - No clearing path geometry returned. + No se devolvió la geometría de la ruta de limpieza. No scan data to convert to Gcode. No hay datos escaneados para convertir a Gcode. + + + Failed to identify tool for operation. + Error al identificar la herramienta de operación. + + + + Failed to map selected tool to an OCL tool type. + No se pudo asignar la herramienta seleccionada a un tipo de herramienta OCL. + + + + Failed to translate active tool to OCL tool type. + Error al traducir la herramienta activa al tipo de herramienta OCL. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + Herramienta OCL no disponible. No se puede determinar si la herramienta de corte tiene la inclinación disponible. + Hold on. This might take a minute. @@ -2603,7 +2603,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Using Center of Boundbox instead. - Using Center of Boundbox instead. + Usando el Centro de Boundbox en su lugar. @@ -2633,12 +2633,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Failed to create collective offset avoid face. - Failed to create collective offset avoid face. + No se pudo crear el desplazamiento colectivo para evitar la cara. Failed to create collective offset avoid internal features. - Failed to create collective offset avoid internal features. + No se pudo crear el desplazamiento colectivo para evitar características internas. @@ -2653,7 +2653,7 @@ If it is necessary to set the FinalDepth manually please select a different oper No FACE data tuples received at instantiation of class. - No FACE data tuples received at instantiation of class. + No se recibieron tuplas de datos de CARA en la instanciación de la clase. @@ -2668,61 +2668,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Diameter dimension missing from ToolBit shape. - Diameter dimension missing from ToolBit shape. + Falta la dimensión del diámetro en la forma de la Herramienta de corte de punto fijo. PathToolBit - - - Create Tool - Crear herramienta - - - - Creates a new ToolBit object - Crea un nuevo objeto "ToolBit" - - - - Save Tool as... - Guardar herramienta como... - - - - Save Tool - Guardar herramienta - - - - Save an existing ToolBit object to a file - Guardar un objeto de Herramienta de Corte de Punto Fijoexistente en un archivo - - - - Load Tool - Cargar herramienta - - - - Load an existing ToolBit object from a file - Cargar un objeto de Herramienta de Corte de Punto Fijo existente desde un archivo - - - - Edit ToolBit - Editar Herramienta de Corte de Punto Fijo - - - - Uncreate ToolBit - No crear Herramienta de Corte de Punto Fijo - - - - Create ToolBit - Crear Herramienta de Corte de Punto Fijo - Shape for bit shape @@ -2763,6 +2713,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Avance por diente según el fabricante + + + Edit ToolBit + Editar Herramienta de Corte de Punto Fijo + + + + Uncreate ToolBit + No crear Herramienta de Corte de Punto Fijo + + + + Create ToolBit + Crear Herramienta de Corte de Punto Fijo + + + + Create Tool + Crear herramienta + + + + Creates a new ToolBit object + Crea un nuevo objeto "ToolBit" + + + + Save Tool as... + Guardar herramienta como... + + + + Save Tool + Guardar herramienta + + + + Save an existing ToolBit object to a file + Guardar un objeto de Herramienta de Corte de Punto Fijoexistente en un archivo + + + + Load Tool + Cargar herramienta + + + + Load an existing ToolBit object from a file + Cargar un objeto de Herramienta de Corte de Punto Fijo existente desde un archivo + PathToolBitLibrary @@ -2789,6 +2789,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error al actualizar TC: %s + The active tool @@ -2839,11 +2844,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller La herramienta utilizada por este controlador - - - Error updating TC: %s - Error al actualizar TC: %s - PathToolLibraryManager @@ -3227,26 +3227,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - La trayectoria base a modificar - - - - Solid object to be used to limit the generated Path. - Objeto sólido que se utilizará para limitar la Ruta generada. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determina si el límite describe una máscara de inclusión o exclusión. - - - - The selected object is not a path - El objeto seleccionado no es una trayectoria - Create a Boundary dressup @@ -3272,6 +3252,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Crear un Aspecto de Límite de Ruta + + + The base path to modify + La trayectoria base a modificar + + + + Solid object to be used to limit the generated Path. + Objeto sólido que se utilizará para limitar la Ruta generada. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determina si el límite describe una máscara de inclusión o exclusión. + + + + The selected object is not a path + El objeto seleccionado no es una trayectoria + Path_DressupRampEntry @@ -3298,41 +3298,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - No se puede copiar etiquetas - error interno - - - - Create a Tag dressup - Crear aspecto de etiqueta - - - - Tag Dress-up - Aspecto de etiquetaje - - - - Creates a Tag Dress-up object from a selected path - Crea un objeto de etiqueta vestir desde una trayectoria seleccionada - - - - Please select one path object - Por favor seleccione un objeto de trayectoria - - - - Create Tag Dress-up - Crear etiqueta Dress-up - - - - Holding Tag - Colocación de etiqueta - The base path to modify @@ -3373,6 +3338,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor que determina el # de segmentos utilizado para aproximar etiquetas redondeadas. + + + Cannot insert holding tags for this path - please select a Profile path + No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria + + + + The selected object is not a path + El objeto seleccionado no es una trayectoria + + + + Please select a Profile object + Por favor, seleccione un perfil del objeto + + + + Holding Tag + Colocación de etiqueta + + + + Cannot copy tags - internal error + No se puede copiar etiquetas - error interno + + + + Create a Tag dressup + Crear aspecto de etiqueta + + + + Tag Dress-up + Aspecto de etiquetaje + + + + Creates a Tag Dress-up object from a selected path + Crea un objeto de etiqueta vestir desde una trayectoria seleccionada + + + + Please select one path object + Por favor seleccione un objeto de trayectoria + + + + Create Tag Dress-up + Crear etiqueta Dress-up + No Base object found. @@ -3393,21 +3408,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base de la ruta está vacía. - - - The selected object is not a path - El objeto seleccionado no es una trayectoria - - - - Please select a Profile object - Por favor, seleccione un perfil del objeto - - - - Cannot insert holding tags for this path - please select a Profile path - No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria - Path_DressupZCorrect @@ -3528,6 +3528,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Trabajo + + + + Creates a Path Job object + Crea la trayectoria de trabajo del objeto + + + + Export Template + Exportar plantilla + + + + Exports Path Job as a template to be used for other jobs + Exporta ruta de trabajo como plantilla para otros trabajos + + + + Create Job + Crear trabajo + Edit Job @@ -3553,31 +3578,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Selección de modelo - - - Create Job - Crear trabajo - - - - Job - Trabajo - - - - Creates a Path Job object - Crea la trayectoria de trabajo del objeto - - - - Export Template - Exportar plantilla - - - - Exports Path Job as a template to be used for other jobs - Exporta ruta de trabajo como plantilla para otros trabajos - Path_OpActiveToggle @@ -3637,9 +3637,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Seleccionar archivo de salida + + Select Probe Point File + Seleccionar Archivo de Punto de Sonda @@ -3647,9 +3647,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Todos los archivos (*.*) - - Select Probe Point File - Seleccionar Archivo de Punto de Sonda + + Select Output File + Seleccionar archivo de salida diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm index 7d429df0a5..01f6ed4698 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index 77c97651df..79715ca9fe 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Gehitu aukerako edo derrigorrezko etena programari - - - - The base object this collision refers to - Talka honek erreferentziatzat duen oinarri-objektua - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan (CW), edo aurka (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Tresnak izkinen inguruan nola mugitzen diren kontrolatzen du. Lehenetsia=Biribila - - - - Maximum distance before a miter join is truncated - Elkartze zorrotz bat trunkatzen hasteko distantzia maximoa - - - - The base geometry of this toolpath - Tresna-bide honen oinarri-geometria - - - - Extra value to stay away from final profile- good for roughing toolpath - Amaierako profiletik aldentzeko balio gehigarria - ona arbastatzeko tresna-bidearentzako - - - - Profile holes as well as the outline - Profilatu zuloak eta eskema - - - - Profile the outline - Profilatu eskema - - - - Profile round holes - Profilatu zulo biribilak - - - - Side of edge that tool should cut - Tresnak moztu beharko lukeen ertz-alboa - - - - Make True, if using Cutter Radius Compensation - Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada - - - - Reverse direction of pocket operation. - Alderantzikatu poltsa-eragiketaren norabidea. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Alderantzikatu angelua. Adibidea: -22.5 -> 22.5 gradu. - - - - Attempt the inverse angle for face access if original rotation fails. - Probatu alderantzizko angelua aurpegia atzitzeko, jatorrizko biraketak huts egiten badu. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Jauzi honek atzitu behar duen objektua - - - - The Z height of the hop - Jauziaren Z altuera - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Gaitu biraketa Z ardatzarekiko normalak ez diren poltsak/areak atzitu ahal izateko. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Markatu 'Egia', hasierako puntu bat adieraziko bada - - - - Incremental Drill depth before retracting to clear chips - Zulatze-sakonera hazkorra, txirbilak garbitzeko atzeraka egin baino lehen - - - - Enable pecking - Gaitu txirbiltzea - - - - The time to dwell between peck cycles - Txirbiltze-zikloen arteko itxarote-denbora - - - - Enable dwell - Gaitu itxarotea - - - - Calculate the tip length and subtract from final depth - Kalkulatu puntaren luzera eta egin kenketa azken sakoneratik - - - - Controls how tool retracts Default=G98 - Tresna nola atzeratzen den kontrolatzen du. Lehenetsia=G98 - - - - The height where feed starts and height during retract tool when path is finished - Elikatzea hasten den altuera eta bidea amaituta dagoenean tresna atzeratzen den altuera - - - - Controls how tool retracts Default=G99 - Tresna nola atzeratzen den kontrolatzen du. Lehenetsia=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - Elikatzea hasten den altuera eta bidea amaituta dagoenean tresna atzeratzen den altuera, txirbiltze-eragiketa batean - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Finkapen-desplazamenduen kopurua - - - - Make False, to prevent operation from generating code - Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu - - - - Extra offset to apply to the operation. Direction is operation dependent. - Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. - - - - Start pocketing at center or boundary - Hasi poltsaren sorrera erdian edo mugan - - - - Percent of cutter diameter to step over on each pass - Igaroaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den - - - - Angle of the zigzag pattern - Sigi-saga ereduaren angelua - - - - Clearing pattern to use - Erabiliko den garbitze-eredua - - - - Use 3D Sorting of Path - Erabili bideen 3D ordenazioa - - - - Attempts to avoid unnecessary retractions. - Beharrezkoak ez diren atzeratzeak saihesteko saialdiak. - - - - Orientation plane of CNC path - CNC bidearen orientazio-planoa - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Markatu 'Egia', hasierako puntu bat adieraziko bada + The path to be copied Kopiatuko den bidea + + + The base geometry of this toolpath + Tresna-bide honen oinarri-geometria + The tool controller that will be used to calculate the path Bidea kalkulatzeko erabiliko den tresna-kontrolatzailea - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Izkina-ekintzan igoko den altuera - - Ramping Method - Arrapala sortzeko metodoa + + The object to be reached by this hop + Jauzi honek atzitu behar duen objektua - - Which feed rate to use for ramping - Zein elikatze-abiadura erabili arrapala sortzeko + + The Z height of the hop + Jauziaren Z altuera - - Custom feedrate - Elikatze-abiadura pertsonalizatua + + X offset between tool and probe + Tresnaren eta haztagailuaren arteko X desplazamendua - - Custom feed rate - Elikatze-abiadura pertsonalizatua + + Y offset between tool and probe + Tresnaren eta haztagailuaren arteko Y desplazamendua - - Should the dressup ignore motion commands above DressupStartDepth - Jantziak DressupStartDepth gaineko mugimendu-komandoak ezikusiko dituen ala ez + + Number of points to probe in X direction + X norabidean haztatuko den puntu kopurua - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Arrapalaren jantzia zein sakoneran gaituko den. Honetatik gora, arrapalak ez dira sortzen, baina mugimendu-komandoak bere horretan igarotzen dira. + + Number of points to probe in Y direction + Y norabidean haztatuko den puntu kopurua - - Pattern method - Eredu-metodoa - - - - Shape to use for calculating Boundary - Muga kalkulatzeko erabiliko den forma - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Baztertu aurpegi barruan igotako areak. + + The output location for the probe data to be written + Idatziko den haztatze-datuen irteerako kokalekua @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Finkapen-desplazamenduen kopurua + + + + Make False, to prevent operation from generating code + Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu + + + + Ramping Method + Arrapala sortzeko metodoa + + + + Which feed rate to use for ramping + Zein elikatze-abiadura erabili arrapala sortzeko + + + + Custom feedrate + Elikatze-abiadura pertsonalizatua + + + + Custom feed rate + Elikatze-abiadura pertsonalizatua + + + + Should the dressup ignore motion commands above DressupStartDepth + Jantziak DressupStartDepth gaineko mugimendu-komandoak ezikusiko dituen ala ez + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Arrapalaren jantzia zein sakoneran gaituko den. Honetatik gora, arrapalak ez dira sortzen, baina mugimendu-komandoak bere horretan igarotzen dira. + + + + Incremental Drill depth before retracting to clear chips + Zulatze-sakonera hazkorra, txirbilak garbitzeko atzeraka egin baino lehen + + + + Enable pecking + Gaitu txirbiltzea + + + + The time to dwell between peck cycles + Txirbiltze-zikloen arteko itxarote-denbora + + + + Enable dwell + Gaitu itxarotea + + + + Calculate the tip length and subtract from final depth + Kalkulatu puntaren luzera eta egin kenketa azken sakoneratik + + + + Controls how tool retracts Default=G98 + Tresna nola atzeratzen den kontrolatzen du. Lehenetsia=G98 + + + + The height where feed starts and height during retract tool when path is finished + Elikatzea hasten den altuera eta bidea amaituta dagoenean tresna atzeratzen den altuera + + + + Controls how tool retracts Default=G99 + Tresna nola atzeratzen den kontrolatzen du. Lehenetsia=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + Elikatzea hasten den altuera eta bidea amaituta dagoenean tresna atzeratzen den altuera, txirbiltze-eragiketa batean + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Gaitu biraketa Z ardatzarekiko normalak ez diren poltsak/areak atzitu ahal izateko. + + + + Reverse direction of pocket operation. + Alderantzikatu poltsa-eragiketaren norabidea. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Alderantzikatu angelua. Adibidea: -22.5 -> 22.5 gradu. + + + + Attempt the inverse angle for face access if original rotation fails. + Probatu alderantzizko angelua aurpegia atzitzeko, jatorrizko biraketak huts egiten badu. + + + + Orientation plane of CNC path + CNC bidearen orientazio-planoa + + + + Shape to use for calculating Boundary + Muga kalkulatzeko erabiliko den forma + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Baztertu aurpegi barruan igotako areak. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Talka honek erreferentziatzat duen oinarri-objektua + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Prozesatu eredua eta pieza oinarri-geometriarik hautatuta ez duen eragiketa batean. - - X offset between tool and probe - Tresnaren eta haztagailuaren arteko X desplazamendua + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan (CW), edo aurka (CCW) - - Y offset between tool and probe - Tresnaren eta haztagailuaren arteko Y desplazamendua + + Extra offset to apply to the operation. Direction is operation dependent. + Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. - - Number of points to probe in X direction - X norabidean haztatuko den puntu kopurua + + Start pocketing at center or boundary + Hasi poltsaren sorrera erdian edo mugan - - Number of points to probe in Y direction - Y norabidean haztatuko den puntu kopurua + + Percent of cutter diameter to step over on each pass + Igaroaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den - - The output location for the probe data to be written - Idatziko den haztatze-datuen irteerako kokalekua + + Angle of the zigzag pattern + Sigi-saga ereduaren angelua + + + + Clearing pattern to use + Erabiliko den garbitze-eredua + + + + Use 3D Sorting of Path + Erabili bideen 3D ordenazioa + + + + Attempts to avoid unnecessary retractions. + Beharrezkoak ez diren atzeratzeak saihesteko saialdiak. + + + + Add Optional or Mandatory Stop to the program + Gehitu aukerako edo derrigorrezko etena programari + + + + Pattern method + Eredu-metodoa + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Tresnak izkinen inguruan nola mugitzen diren kontrolatzen du. Lehenetsia=Biribila + + + + Maximum distance before a miter join is truncated + Elkartze zorrotz bat trunkatzen hasteko distantzia maximoa + + + + Extra value to stay away from final profile- good for roughing toolpath + Amaierako profiletik aldentzeko balio gehigarria - ona arbastatzeko tresna-bidearentzako + + + + Profile holes as well as the outline + Profilatu zuloak eta eskema + + + + Profile the outline + Profilatu eskema + + + + Profile round holes + Profilatu zulo biribilak + + + + Side of edge that tool should cut + Tresnak moztu beharko lukeen ertz-alboa + + + + Make True, if using Cutter Radius Compensation + Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Grabatze-eragiketak - - - - 3D Operations - 3D eragiketak - - - - Project Setup - Proiektuaren konfigurazioa - - - - Tool Commands - Tresna-komandoak - - - - New Operations - Eragiketa berriak - - - - Path Modification - Bidearen aldaketa - - - - Helpful Tools - Tresna lagungarriak - - - - &Path - &Bidea - - - - Path Dressup - Bidearen jantzia - - - - Supplemental Commands - Komando osagarriak - - - - Unable to create path for face(s). - Ezin izan da sortu bidea aurpegietarako. - - - - Face appears misaligned after initial rotation. - Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. - - - - Multiple faces in Base Geometry. - Aurpegi anitz oinarri-geometrian. - - - - Depth settings will be applied to all faces. - Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. - - - - EnableRotation property is 'Off'. - Biraketa gaitzeko propietatea desaktibatuta dago. - - - - Rotated to inverse angle. - Biratu alderantzizko angelura. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Hautatutako elementua(e) k 'Gaitu biraketa: A(x)' behar du(te) atzipenerako. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Hautatutako elementua(e) k 'Gaitu biraketa: B(y)' behar du(te) atzipenerako. - - - - -<br>Pocket is based on extruded surface. - -<br>Poltsa estruitutako gainazalean oinarrituta dago. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Poltsaren hondoa ez planarra eta/edo ez normala izan daiteke hax-ardatzarekiko. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D poltsaren hondoa EZ dago erabilgarri eragiketa honetan</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta eragiketa birkalkulatu ahal dela. - - - - Processing subs individually ... - Azpiformak banaka prozesatzen... - - - - Depth Warning - Sakoneraren abisua - - - - Verify final depth of pocket shaped by vertical faces. - Egiaztatu aurpegi bertikalez mugatutako poltsaren azken sakonera. - - - - Processing model as a whole ... - Eredua osotasun gisa prozesatzen... - - - - Can not identify loop. - Ezin da begizta identifikatu. - Edit Editatu - - Heights - Altuerak + + %s is not a Base Model object of the job %s + %s ez da oinarri-ereduen objektua %s lanerako - - AreaOp Operation - AreaOp eragiketa + + Base shape %s already in the list + %s oinarri-forma dagoeneko zerrendan dago - - Uncreate AreaOp Operation - Desegin AreaOp eragiketa + + Ignoring vertex + Erpina ezikusten - - Pick Start Point - Aukeratu hasiera-puntua + + Didn't find job %s + Ez da %s lana aurkitu + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Mozte- ertzaren angelu baliogabea %.2f, izan behar du <90° eta >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Mozte-ertzaren angeluak (%.2f) tresna-puntaren luzera negatiboa ematen du @@ -1133,19 +1005,127 @@ %s.%s oinarri-forma baztertu egin da eragiketarako - - %s is not a Base Model object of the job %s - %s ez da oinarri-ereduen objektua %s lanerako + + Heights + Altuerak - - Base shape %s already in the list - %s oinarri-forma dagoeneko zerrendan dago + + AreaOp Operation + AreaOp eragiketa - - Ignoring vertex - Erpina ezikusten + + Uncreate AreaOp Operation + Desegin AreaOp eragiketa + + + + Pick Start Point + Aukeratu hasiera-puntua + + + + +<br>Pocket is based on extruded surface. + +<br>Poltsa estruitutako gainazalean oinarrituta dago. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Poltsaren hondoa ez planarra eta/edo ez normala izan daiteke hax-ardatzarekiko. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D poltsaren hondoa EZ dago erabilgarri eragiketa honetan</i>. + + + + Face appears misaligned after initial rotation. + Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. + + + + Multiple faces in Base Geometry. + Aurpegi anitz oinarri-geometrian. + + + + Depth settings will be applied to all faces. + Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. + + + + EnableRotation property is 'Off'. + Biraketa gaitzeko propietatea desaktibatuta dago. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta eragiketa birkalkulatu ahal dela. + + + + Processing subs individually ... + Azpiformak banaka prozesatzen... + + + + Depth Warning + Sakoneraren abisua + + + + Verify final depth of pocket shaped by vertical faces. + Egiaztatu aurpegi bertikalez mugatutako poltsaren azken sakonera. + + + + Processing model as a whole ... + Eredua osotasun gisa prozesatzen... + + + + Can not identify loop. + Ezin da begizta identifikatu. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Hasiera moldakor planarra ez dago erabilgarri. Planarra ez dena probatuko da. + + + + The non-planar adaptive start is also unavailable. + Hasiera moldakor ez planarra ere ez dago erabilgarri. + + + + Rotated to inverse angle. + Biratu alderantzizko angelura. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Hautatutako elementua(e) k 'Gaitu biraketa: A(x)' behar du(te) atzipenerako. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Hautatutako elementua(e) k 'Gaitu biraketa: B(y)' behar du(te) atzipenerako. @@ -1173,39 +1153,59 @@ Hautatu beti zuloaren behealdeko ertza, ertz bat erabiltzean. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Hasiera moldakor planarra ez dago erabilgarri. Planarra ez dena probatuko da. + + Unable to create path for face(s). + Ezin izan da sortu bidea aurpegietarako. - - The non-planar adaptive start is also unavailable. - Hasiera moldakor ez planarra ere ez dago erabilgarri. + + Engraving Operations + Grabatze-eragiketak - - Didn't find job %s - Ez da %s lana aurkitu + + 3D Operations + 3D eragiketak - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Mozte- ertzaren angelu baliogabea %.2f, izan behar du <90° eta >=0° + + Project Setup + Proiektuaren konfigurazioa - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + + Tool Commands + Tresna-komandoak - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + + New Operations + Eragiketa berriak - - Cutting Edge Angle (%.2f) results in negative tool tip length - Mozte-ertzaren angeluak (%.2f) tresna-puntaren luzera negatiboa ematen du + + Path Modification + Bidearen aldaketa + + + + Helpful Tools + Tresna lagungarriak + + + + &Path + &Bidea + + + + Path Dressup + Bidearen jantzia + + + + Supplemental Commands + Komando osagarriak @@ -1388,16 +1388,6 @@ PathEngrave - - - Additional base objects to be engraved - Grabatuko diren oinarri-objektu gehigarriak - - - - The vertex index to start the path from - Bidea hasiko den erpinaren indizea - Engrave @@ -1408,6 +1398,16 @@ Creates an Engraving Path around a Draft ShapeString Grabazio-bide bat sortzen du zirriborroko testu-forma baten inguruan + + + Additional base objects to be engraved + Grabatuko diren oinarri-objektu gehigarriak + + + + The vertex index to start the path from + Bidea hasiko den erpinaren indizea + PathFace @@ -1464,16 +1464,16 @@ PathGui - - - %s has no property %s (%s)) - %s-(e)k ez dauka %s propietatea (%s)) - Cannot find property %s of %s Ezin da %s elementuaren %s propietatea aurkitu + + + %s has no property %s (%s)) + %s-(e)k ez dauka %s propietatea (%s)) + Tool Error @@ -1492,6 +1492,16 @@ PathHelix + + + Helix + Helizea + + + + Creates a Path Helix object from a features of a base object + Helize-bideko objektu bat sortzen du oinarri-objektu bateko elementuetatik + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1512,16 +1522,6 @@ Starting Radius Hasierako erradioa - - - Helix - Helizea - - - - Creates a Path Helix object from a features of a base object - Helize-bideko objektu bat sortzen du oinarri-objektu bateko elementuetatik - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1530,6 +1530,31 @@ PathJob + + + Unsupported stock object %s + Onartzen ez den %s objektu gordina + + + + Unsupported stock type %s (%d) + Onartzen ez den %s objektu gordina (%d) + + + + Stock not from Base bound box! + Pieza gordinak ez dauka oinarriaren muga-kutxa! + + + + Stock not a box! + Pieza gordina ez da kutxa bat! + + + + Stock not a cylinder! + Pieza gordina ez da zilindro bat! + The NC output file for this project @@ -1600,31 +1625,6 @@ Unsupported PathJob template version %s Onartzen ez den PathJob txantiloi-bertsioa (%s) - - - Unsupported stock object %s - Onartzen ez den %s objektu gordina - - - - Unsupported stock type %s (%d) - Onartzen ez den %s objektu gordina (%d) - - - - Stock not from Base bound box! - Pieza gordinak ez dauka oinarriaren muga-kutxa! - - - - Stock not a box! - Pieza gordina ez da kutxa bat! - - - - Stock not a cylinder! - Pieza gordina ez da zilindro bat! - Solids @@ -1668,43 +1668,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Oinarri-geometria - - - - Base Location - Oinarri-kokapena - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Azken sakonera ezin da aldatu eragiketa honetarako. -Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat. - - - - Depths - Sakonerak - - - - Operation - Eragiketa - The base geometry for this operation @@ -1750,6 +1713,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat User Assigned Label Erabiltzaileak esleitutako etiketa + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1815,6 +1783,38 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Coolant option for this operation Eragiketa honetarako hozte-aukera + + + Base Geometry + Oinarri-geometria + + + + Base Location + Oinarri-kokapena + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Azken sakonera ezin da aldatu eragiketa honetarako. +Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat. + + + + Depths + Sakonerak + + + + Operation + Eragiketa + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1827,19 +1827,14 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathPocket - - Choose how to process multiple Base Geometry features. - Aukeratu nola prozesatuko diren oinarri-geometriako elementu anitz. + + 3D Pocket + 3D poltsa - - Pass Extension - Igaroaldien hedadura - - - - The distance the facing operation will extend beyond the boundary shape. - Aurpegia sortzeko eragiketa hedatuko den distantzia muga-formaz kanpo. + + Creates a Path 3D Pocket object from a face or faces + 3d bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik @@ -1857,14 +1852,29 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Aurpegi bertikalek ez dute begizta bat osatzen - ez ikusten - - 3D Pocket - 3D poltsa + + Adaptive clearing and profiling + Garbitze eta profilatze moldakorra - - Creates a Path 3D Pocket object from a face or faces - 3d bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik + + Pass Extension + Igaroaldien hedadura + + + + The distance the facing operation will extend beyond the boundary shape. + Aurpegia sortzeko eragiketa hedatuko den distantzia muga-formaz kanpo. + + + + Choose how to process multiple Base Geometry features. + Aukeratu nola prozesatuko diren oinarri-geometriako elementu anitz. + + + + Final depth set below ZMin of face(s) selected. + Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita. @@ -1891,16 +1901,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Pocket object from a face or faces Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - - - Adaptive clearing and profiling - Garbitze eta profilatze moldakorra - - - - Final depth set below ZMin of face(s) selected. - Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita. - Generating toolpath with libarea offsets. @@ -1949,6 +1949,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathProfile + + + Profile based on face or faces + Aurpegi batean edo batzuetan oinarritutako profila + Profile @@ -2019,11 +2024,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Aurpegi batean edo batzuetan oinarritutako profila - Edge Profile @@ -2286,7 +2286,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat No parallel edges identified. - No parallel edges identified. + Ez da ertz paralelorik identifikatu. @@ -2296,7 +2296,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Current tool larger than arc diameter. - Current tool larger than arc diameter. + Uneko trensa arku-diametroa baino luzeagoa da. @@ -2434,26 +2434,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2527,7 +2507,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat operation time is - operation time is + eragiketa-denbora: @@ -2559,6 +2539,26 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2613,7 +2613,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Ignoring selected faces. - Ignoring selected faces. + Hautatutako aurpegiei ez ikusiarena egiten. @@ -2673,56 +2673,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathToolBit - - - Create Tool - Sortu tresna - - - - Creates a new ToolBit object - Tresna-atal objektu berria sortzen du - - - - Save Tool as... - Gorde tresna honela... - - - - Save Tool - Gorde tresna - - - - Save an existing ToolBit object to a file - Gorde lehendik dagoen tresna-atal objektu bat fitxategi batean - - - - Load Tool - Kargatu tresna - - - - Load an existing ToolBit object from a file - Kargatu lehendik dagoen tresna-atal objektu bat fitxategi batetik - - - - Edit ToolBit - Editatu tresna-atala - - - - Uncreate ToolBit - Desegin tresna-atala - - - - Create ToolBit - Sortu tresna-atala - Shape for bit shape @@ -2763,6 +2713,56 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Chipload as per manufacturer Fabrikatzaileak ezarritako txirbil-karga + + + Edit ToolBit + Editatu tresna-atala + + + + Uncreate ToolBit + Desegin tresna-atala + + + + Create ToolBit + Sortu tresna-atala + + + + Create Tool + Sortu tresna + + + + Creates a new ToolBit object + Tresna-atal objektu berria sortzen du + + + + Save Tool as... + Gorde tresna honela... + + + + Save Tool + Gorde tresna + + + + Save an existing ToolBit object to a file + Gorde lehendik dagoen tresna-atal objektu bat fitxategi batean + + + + Load Tool + Kargatu tresna + + + + Load an existing ToolBit object from a file + Kargatu lehendik dagoen tresna-atal objektu bat fitxategi batetik + PathToolBitLibrary @@ -2789,6 +2789,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathToolController + + + Error updating TC: %s + Errorea TC eguneratzean: %s + The active tool @@ -2839,11 +2844,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat The tool used by this controller Kontrolatzaile honek erabilitako tresna - - - Error updating TC: %s - Errorea TC eguneratzean: %s - PathToolLibraryManager @@ -2979,7 +2979,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat operation time is - operation time is + eragiketa-denbora: @@ -3227,26 +3227,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_DressupPathBoundary - - - The base path to modify - Aldatuko den oinarri-bidea - - - - Solid object to be used to limit the generated Path. - Sortutako bidea mugatzeko erabiliko den objektu solidoa. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Mugak inklusio- ala esklusio-maskara bat deskribatzen duen zehazten du. - - - - The selected object is not a path - Hautatutako objektua ez da bide bat - Create a Boundary dressup @@ -3272,6 +3252,26 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Path Boundary Dress-up Bide-mugen jantzi-objektua + + + The base path to modify + Aldatuko den oinarri-bidea + + + + Solid object to be used to limit the generated Path. + Sortutako bidea mugatzeko erabiliko den objektu solidoa. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Mugak inklusio- ala esklusio-maskara bat deskribatzen duen zehazten du. + + + + The selected object is not a path + Hautatutako objektua ez da bide bat + Path_DressupRampEntry @@ -3298,41 +3298,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_DressupTag - - - Cannot copy tags - internal error - Ezin dira etiketak kopiatu - barneko errorea - - - - Create a Tag dressup - Sortu etiketa-jantzi bat - - - - Tag Dress-up - Etiketa-jantzia - - - - Creates a Tag Dress-up object from a selected path - Etiketa-jantzi objektu bat sortzen du hautatutako bide bat erabiliz - - - - Please select one path object - Hautatu bide-objektu bat - - - - Create Tag Dress-up - Sortu etiketa-jantzi bat - - - - Holding Tag - Euste-etiketa - The base path to modify @@ -3373,6 +3338,56 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Factor determining the # of segments used to approximate rounded tags. Etiketa biribilduetara hurbiltzeko erabiliko diren # segmentuak zehazteko faktorea. + + + Cannot insert holding tags for this path - please select a Profile path + Ezin dira euste-etiketak txertatu bide honetarako - hautatu profil-bide bat + + + + The selected object is not a path + Hautatutako objektua ez da bide bat + + + + Please select a Profile object + Hautatu profil-objektu bat + + + + Holding Tag + Euste-etiketa + + + + Cannot copy tags - internal error + Ezin dira etiketak kopiatu - barneko errorea + + + + Create a Tag dressup + Sortu etiketa-jantzi bat + + + + Tag Dress-up + Etiketa-jantzia + + + + Creates a Tag Dress-up object from a selected path + Etiketa-jantzi objektu bat sortzen du hautatutako bide bat erabiliz + + + + Please select one path object + Hautatu bide-objektu bat + + + + Create Tag Dress-up + Sortu etiketa-jantzi bat + No Base object found. @@ -3393,21 +3408,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Base Path is empty. Oinarri-bidea hutsik dago. - - - The selected object is not a path - Hautatutako objektua ez da bide bat - - - - Please select a Profile object - Hautatu profil-objektu bat - - - - Cannot insert holding tags for this path - please select a Profile path - Ezin dira euste-etiketak txertatu bide honetarako - hautatu profil-bide bat - Path_DressupZCorrect @@ -3528,6 +3528,31 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Job + + + Job + Lana + + + + Creates a Path Job object + Bide-laneko objektu bat sortzen du + + + + Export Template + Esportatu txantiloia + + + + Exports Path Job as a template to be used for other jobs + Bide-lana txantiloi gisa esportatzen du, beste lan batzuetan erabili ahal izateko + + + + Create Job + Sortu lana + Edit Job @@ -3553,31 +3578,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Model Selection Ereduaren hautapena - - - Create Job - Sortu lana - - - - Job - Lana - - - - Creates a Path Job object - Bide-laneko objektu bat sortzen du - - - - Export Template - Esportatu txantiloia - - - - Exports Path Job as a template to be used for other jobs - Bide-lana txantiloi gisa esportatzen du, beste lan batzuetan erabili ahal izateko - Path_OpActiveToggle @@ -3637,9 +3637,9 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Probe - - Select Output File - Hautatu irteerako fitxategia + + Select Probe Point File + Hautatu haztatze-puntuen fitxategia @@ -3647,9 +3647,9 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Fitxategi guztiak (*.*) - - Select Probe Point File - Hautatu haztatze-puntuen fitxategia + + Select Output File + Hautatu irteerako fitxategia diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm index 4dc293c555..07069f2ed3 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index 56b3e82275..7c29892511 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Työkalukomennot - - - - New Operations - Uudet toiminnot - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Muokkaa - - Heights - Korkeudet + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Korkeudet - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Työkalukomennot - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Uudet toiminnot - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Kierre + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Kierre - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Syvyydet - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Syvyydet + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Työ + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Vie malli + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Luo työ + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Luo työ - - - - Job - Työ - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Vie malli - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Kaikki tiedostot (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm index 676942e314..b8eb5ff846 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index c80b19af94..14a3b9f868 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Magdagdag ng Opsyonal o Mandatory Stop sa programa - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Kinokontrol kung paano gumalaw ang tool sa paligid ng mga corner. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum na distansya bago ang miter join ay truncated - - - - The base geometry of this toolpath - Ang base Heometría ng toolpath na ito - - - - Extra value to stay away from final profile- good for roughing toolpath - Labis na halaga upang maiwasan ang huling profile - mabuti para sa roughing toolpath - - - - Profile holes as well as the outline - Mga holes ng profile at pati na rin ng outline - - - - Profile the outline - I-profile ang outline - - - - Profile round holes - I-profile ang bilog na mga hole - - - - Side of edge that tool should cut - Panig sa edge kung saan dapat i-cut ng tool - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Ang bagay na maaabot ng hop na ito - - - - The Z height of the hop - Ang taas ng Z ng hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Gawing totoo, kung tumutukoy sa isang Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth bago retracting to malinis chips - - - - Enable pecking - Paganahin ang pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - Ang tugatog kung saan nagsisimula at taas ang feed habang nagtatanggal ng tool kapag natapos na ang landas - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Bilang ng Fixture Offset - - - - Make False, to prevent operation from generating code - Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. - - - - Start pocketing at center or boundary - Magsimula ng pocketing sa sentro o sa hangganan - - - - Percent of cutter diameter to step over on each pass - Ang porsiyento ng cutter diameter upang mag step over sa bawat pass - - - - Angle of the zigzag pattern - Angel ng zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane ng CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Gawing totoo, kung tumutukoy sa isang Start Point + The path to be copied Ang landas upang kopyahin + + + The base geometry of this toolpath + Ang base Heometría ng toolpath na ito + The tool controller that will be used to calculate the path Ang controller ng tool na gagamitin para kalkulahin ang path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Taas na itataas sa panahon ng corner action - - Ramping Method - Paraan ng Ramping + + The object to be reached by this hop + Ang bagay na maaabot ng hop na ito - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + Ang taas ng Z ng hop - - Custom feedrate - Ang Nakagawiang feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Method ng pattern - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Bilang ng Fixture Offset + + + + Make False, to prevent operation from generating code + Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code + + + + Ramping Method + Paraan ng Ramping + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Ang Nakagawiang feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth bago retracting to malinis chips + + + + Enable pecking + Paganahin ang pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Ang tugatog kung saan nagsisimula at taas ang feed habang nagtatanggal ng tool kapag natapos na ang landas + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane ng CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Magsimula ng pocketing sa sentro o sa hangganan - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Ang porsiyento ng cutter diameter upang mag step over sa bawat pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angel ng zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Magdagdag ng Opsyonal o Mandatory Stop sa programa + + + + Pattern method + Method ng pattern + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Kinokontrol kung paano gumalaw ang tool sa paligid ng mga corner. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum na distansya bago ang miter join ay truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Labis na halaga upang maiwasan ang huling profile - mabuti para sa roughing toolpath + + + + Profile holes as well as the outline + Mga holes ng profile at pati na rin ng outline + + + + Profile the outline + I-profile ang outline + + + + Profile round holes + I-profile ang bilog na mga hole + + + + Side of edge that tool should cut + Panig sa edge kung saan dapat i-cut ng tool + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Setup ng Proyekto - - - - Tool Commands - Commands ng Tool - - - - New Operations - Bagong mga Operasyon - - - - Path Modification - Path Modification - - - - Helpful Tools - Makakatulong na mga Tool - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit I-edit - - Heights - Taas + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Operasyon ng AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Operasyon ng Uncreate AreaOp + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pumili ng Simulang Point + + Didn't find job %s + Hindi nakahanap ng job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Hindi valid na Cutting Edge Angle %.2f, dapat ay <90° at >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) nagresulta sa negatibong haba ng tool tip @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Taas - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Operasyon ng AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Operasyon ng Uncreate AreaOp + + + + Pick Start Point + Pumili ng Simulang Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Hindi nakahanap ng job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Hindi valid na Cutting Edge Angle %.2f, dapat ay <90° at >=0° + + Project Setup + Setup ng Proyekto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Commands ng Tool - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Bagong mga Operasyon - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) nagresulta sa negatibong haba ng tool tip + + Path Modification + Path Modification + + + + Helpful Tools + Makakatulong na mga Tool + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Lumilikha ng isang Engraving Path palibot sa Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s ay walang property %s (%s)) - Cannot find property %s of %s Hindi matagpuan ang property %s ng %s + + + %s has no property %s (%s)) + %s ay walang property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Helix + + + + Creates a Path Helix object from a features of a base object + Lumilikha ng Path Helix object mula sa mga feature ng isang base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Helix - - - - Creates a Path Helix object from a features of a base object - Lumilikha ng Path Helix object mula sa mga feature ng isang base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Hindi suportadong stock object %s + + + + Unsupported stock type %s (%d) + Hindi suportadong uri ng stock %s (%d) + + + + Stock not from Base bound box! + Ang stock ay hindi mula sa Bse bound box! + + + + Stock not a box! + Ang Stock ay hindi isang box! + + + + Stock not a cylinder! + Ang stock ay hindi isang cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Hindi suportadong bersyon ng Pathjob template %s - - - Unsupported stock object %s - Hindi suportadong stock object %s - - - - Unsupported stock type %s (%d) - Hindi suportadong uri ng stock %s (%d) - - - - Stock not from Base bound box! - Ang stock ay hindi mula sa Bse bound box! - - - - Stock not a box! - Ang Stock ay hindi isang box! - - - - Stock not a cylinder! - Ang stock ay hindi isang cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Lokasyon ng Base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Mga Lalim - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Naka-assign na Label ng User + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Lokasyon ng Base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Mga Lalim + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Bulsa ng 3D - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - Ang distansya na i-extend ng facing operation lagpas sa hangganan ng hugis. + + Creates a Path 3D Pocket object from a face or faces + Lumilikha ng isang bagay na Bulsang 3D na Landas mula sa isang mukha o mga mukha @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Ang mukhang Patayo ay hindi bumubuo ng isang silo - hindi pinapansin - - 3D Pocket - Bulsa ng 3D + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Lumilikha ng isang bagay na Bulsang 3D na Landas mula sa isang mukha o mga mukha + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + Ang distansya na i-extend ng facing operation lagpas sa hangganan ng hugis. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Kamalian sa pag u-update TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Ang tool na gamit ng controller na ito - - - Error updating TC: %s - Kamalian sa pag u-update TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Ang batayang landas na baguhin - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Ang batayang landas na baguhin + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Lumikha ng Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Lumikha ng Tag Dress-up object mula sa napiling path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Lumikha ng Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Mangyaring pumili ng Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Lumikha ng Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Lumikha ng Tag Dress-up object mula sa napiling path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Lumikha ng Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Ang Base Path ay walang laman. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Mangyaring pumili ng Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Lumilikha ng Path job object + + + + Export Template + I-export Template + + + + Exports Path Job as a template to be used for other jobs + Nag-eeksport ng Path job bilang isang template na gagamitin para sa iba pang mga jobs + + + + Create Job + Lumikha ng job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Lumikha ng job - - - - Job - Job - - - - Creates a Path Job object - Lumilikha ng Path job object - - - - Export Template - I-export Template - - - - Exports Path Job as a template to be used for other jobs - Nag-eeksport ng Path job bilang isang template na gagamitin para sa iba pang mga jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Pumili ng Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Pumili ng Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm index 33cb5b3121..002f9e7ef4 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index fc2cc9a9f3..285c5d3df8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Ajouter une arrêt facultatif ou obligatoire du programme - - - - The base object this collision refers to - Objet de base à laquelle se réfère cette collision - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - Direction du parcours d’outils autour de la pièce en sens horaire (CW) ou anti-horaire (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Contrôle la façon dont l’outil se déplace dans les coins. Par défaut = arrondi - - - - Maximum distance before a miter join is truncated - Distance maximale avant le troncature de la jointure à onglet - - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - - - - Extra value to stay away from final profile- good for roughing toolpath - Surépaisseur par rapport au profil final - valable pour une ébauche - - - - Profile holes as well as the outline - Profiler les trous ainsi que le contour - - - - Profile the outline - Profiler le contour - - - - Profile round holes - Profil des trous circulaires - - - - Side of edge that tool should cut - Côté de l'arête que l'outil doit couper - - - - Make True, if using Cutter Radius Compensation - Marquer « true » si vous utilisez une compensation de rayon de coupe - - - - Reverse direction of pocket operation. - Inverser la direction de l'opération de poche. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inversez l'angle. Exemple: -22.5 -> 22.5 degrés. - - - - Attempt the inverse angle for face access if original rotation fails. - Essai l'angle inverse pour l'accès à la face si la rotation d'origine échoue. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - L'objet à atteindre avec ce saut - - - - The Z height of the hop - La hauteur Z de ce saut - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Activer la rotation pour accéder aux poches/zones non normales à l'axe Z. - Show the temporary path construction objects when module is in DEBUG mode. Afficher les objets de construction de chemin temporaire lorsque le module est en mode DEBUG. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Terminer l’opération en une seule passe à la profondeur, ou plusieurs passes jusqu’à la profondeur finale. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Marquer « true » si vous définissez un point de départ - - - - Incremental Drill depth before retracting to clear chips - Incrément de profondeur de perçage avant retrait pour enlever les copeaux (débourrage) - - - - Enable pecking - Activer le débourrage - - - - The time to dwell between peck cycles - Temps d'attente entre les cycles de perçage - - - - Enable dwell - Activer la temporisation - - - - Calculate the tip length and subtract from final depth - Calculer la longueur de l’extrémité et la soustraire de la profondeur finale - - - - Controls how tool retracts Default=G98 - Contrôle la façon dont l’outil se rétracte. Par défaut = G98 - - - - The height where feed starts and height during retract tool when path is finished - La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé - - - - Controls how tool retracts Default=G99 - Contrôle la façon dont l’outil se rétracte. Par défaut = G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé lors d'une opération de perçage - - - - How far the drill depth is extended - Distance d’extension de la profondeur de perçage - - - - Fixture Offset Number - Nombre de déports de l'outillage - - - - Make False, to prevent operation from generating code - Marquer « false », pour empêcher l'opération ne génére du code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. - - - - Start pocketing at center or boundary - Débuter la création de la poche au centre ou sur la limite - - - - Percent of cutter diameter to step over on each pass - Avance en pourcentage du diamètre de l'outil à chaque passe - - - - Angle of the zigzag pattern - Angle de la fonction ZigZag - - - - Clearing pattern to use - Effacement du motif à utiliser - - - - Use 3D Sorting of Path - Utiliser un tri 3D de trajectoire - - - - Attempts to avoid unnecessary retractions. - Essaie d’éviter les rétractions inutiles. - - - - Orientation plane of CNC path - Plan d'orientation du parcours CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Définir la direction de l’outil de coupe pour engager le matériau : en avalant (sens horaire) ou Conventionnel (sens horaire) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Terminer l’opération en une seule passe à la profondeur, ou plusieurs passes jusqu’à la profondeur finale. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Marquer « true » si vous définissez un point de départ + The path to be copied Le chemin d'accès à copier + + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil + The tool controller that will be used to calculate the path Le contrôleur d’outil qui sera utilisé pour calculer la trajectoire - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Les plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs augmentent considérablement le temps de traitement. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Les plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs n'augmentent pas le temps de traitement. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Sélectionnez l'algorithme à utiliser : OCL Dropcutter*, ou Experimental (Non basé sur OCL ). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignorer les lignes de navigation extérieures au-dessus de cette hauteur. - The base path to modify @@ -534,54 +269,39 @@ Hauteur de la levée au cours de l’action de coin - - Ramping Method - Mode de plongée + + The object to be reached by this hop + L'objet à atteindre avec ce saut - - Which feed rate to use for ramping - Quel est l'avance de l'outil à utiliser pour la plongée + + The Z height of the hop + La hauteur Z de ce saut - - Custom feedrate - Vitesse d’avance personnalisée + + X offset between tool and probe + Décalage en X entre l'outil et la sonde - - Custom feed rate - Vitesse d’avance personnalisée + + Y offset between tool and probe + Décalage en Y entre l'outil et la sonde - - Should the dressup ignore motion commands above DressupStartDepth - Si la trajectoire additionnelle doit ignorer les commandes de mouvement au-dessus de DressupStartDepth + + Number of points to probe in X direction + Nombre de points à sonder dans la direction X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - La profondeur où la trajectoire additionnelle rampe est activée. Au-dessus de celle-ci, les rampes ne sont pas générées, les commandes de mouvement sont transmises telles quelles. + + Number of points to probe in Y direction + Nombre de points à sonder en direction Y - - Pattern method - Méthode de l'opération - - - - Shape to use for calculating Boundary - Forme à utiliser pour calculer les limites - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclure des zones de fraisage à l'intérieur de la surface. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Nombre de déports de l'outillage + + + + Make False, to prevent operation from generating code + Marquer « false », pour empêcher l'opération ne génére du code + + + + Ramping Method + Mode de plongée + + + + Which feed rate to use for ramping + Quel est l'avance de l'outil à utiliser pour la plongée + + + + Custom feedrate + Vitesse d’avance personnalisée + + + + Custom feed rate + Vitesse d’avance personnalisée + + + + Should the dressup ignore motion commands above DressupStartDepth + Si la trajectoire additionnelle doit ignorer les commandes de mouvement au-dessus de DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + La profondeur où la trajectoire additionnelle rampe est activée. Au-dessus de celle-ci, les rampes ne sont pas générées, les commandes de mouvement sont transmises telles quelles. + + + + Incremental Drill depth before retracting to clear chips + Incrément de profondeur de perçage avant retrait pour enlever les copeaux (débourrage) + + + + Enable pecking + Activer le débourrage + + + + The time to dwell between peck cycles + Temps d'attente entre les cycles de perçage + + + + Enable dwell + Activer la temporisation + + + + Calculate the tip length and subtract from final depth + Calculer la longueur de l’extrémité et la soustraire de la profondeur finale + + + + Controls how tool retracts Default=G98 + Contrôle la façon dont l’outil se rétracte. Par défaut = G98 + + + + The height where feed starts and height during retract tool when path is finished + La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé + + + + Controls how tool retracts Default=G99 + Contrôle la façon dont l’outil se rétracte. Par défaut = G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé lors d'une opération de perçage + + + + How far the drill depth is extended + Distance d’extension de la profondeur de perçage + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Activer la rotation pour accéder aux poches/zones non normales à l'axe Z. + + + + Reverse direction of pocket operation. + Inverser la direction de l'opération de poche. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inversez l'angle. Exemple: -22.5 -> 22.5 degrés. + + + + Attempt the inverse angle for face access if original rotation fails. + Essai l'angle inverse pour l'accès à la face si la rotation d'origine échoue. + + + + Orientation plane of CNC path + Plan d'orientation du parcours CNC + + + + Shape to use for calculating Boundary + Forme à utiliser pour calculer les limites + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclure des zones de fraisage à l'intérieur de la surface. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Les plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs augmentent considérablement le temps de traitement. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Les plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs n'augmentent pas le temps de traitement. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Sélectionnez l'algorithme à utiliser : OCL Dropcutter*, ou Experimental (Non basé sur OCL ). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignorer les lignes de navigation extérieures au-dessus de cette hauteur. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Objet de base à laquelle se réfère cette collision + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Traiter le modèle et le stock dans une opération sans géométrie de base sélectionnée. - - X offset between tool and probe - Décalage en X entre l'outil et la sonde + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Direction du parcours d’outils autour de la pièce en sens horaire (CW) ou anti-horaire (CCW) - - Y offset between tool and probe - Décalage en Y entre l'outil et la sonde + + Extra offset to apply to the operation. Direction is operation dependent. + Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. - - Number of points to probe in X direction - Nombre de points à sonder dans la direction X + + Start pocketing at center or boundary + Débuter la création de la poche au centre ou sur la limite - - Number of points to probe in Y direction - Nombre de points à sonder en direction Y + + Percent of cutter diameter to step over on each pass + Avance en pourcentage du diamètre de l'outil à chaque passe - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle de la fonction ZigZag + + + + Clearing pattern to use + Effacement du motif à utiliser + + + + Use 3D Sorting of Path + Utiliser un tri 3D de trajectoire + + + + Attempts to avoid unnecessary retractions. + Essaie d’éviter les rétractions inutiles. + + + + Add Optional or Mandatory Stop to the program + Ajouter une arrêt facultatif ou obligatoire du programme + + + + Pattern method + Méthode de l'opération + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Contrôle la façon dont l’outil se déplace dans les coins. Par défaut = arrondi + + + + Maximum distance before a miter join is truncated + Distance maximale avant le troncature de la jointure à onglet + + + + Extra value to stay away from final profile- good for roughing toolpath + Surépaisseur par rapport au profil final - valable pour une ébauche + + + + Profile holes as well as the outline + Profiler les trous ainsi que le contour + + + + Profile the outline + Profiler le contour + + + + Profile round holes + Profil des trous circulaires + + + + Side of edge that tool should cut + Côté de l'arête que l'outil doit couper + + + + Make True, if using Cutter Radius Compensation + Marquer « true » si vous utilisez une compensation de rayon de coupe @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Opérations de gravure - - - - 3D Operations - Opérations de 3D - - - - Project Setup - Configuration du projet - - - - Tool Commands - Commandes d’outil - - - - New Operations - Nouvelles opérations - - - - Path Modification - Modification du parcours - - - - Helpful Tools - Outils utiles - - - - &Path - &Parcours - - - - Path Dressup - Optimisation de trajectoire - - - - Supplemental Commands - Commandes additionnelles - - - - Unable to create path for face(s). - Impossible de créer le chemin pour la (les) face(s). - - - - Face appears misaligned after initial rotation. - La face semble mal alignée après la rotation initiale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Envisagez de basculer la propriété 'InverseAngle' et de recalculer. - - - - Multiple faces in Base Geometry. - Faces multiples dans la géométrie de base. - - - - Depth settings will be applied to all faces. - Les paramètres de profondeur seront appliqués à toutes les faces. - - - - EnableRotation property is 'Off'. - La propriété EnableRotation est 'Off'. - - - - Rotated to inverse angle. - Pivoté à l'angle inverse. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - La(les) fonction(s) sélectionnée(s) nécessite(nt) 'Activer la rotation : A(x)' pour l'accès. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - La(les) fonction(s) sélectionnée(s) nécessite(nt) 'Activer la rotation : B(y)' pour l'accès. - - - - -<br>Pocket is based on extruded surface. - -<br>La poche est basée sur la surface extrudée. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Le bas de la poche peut être non planaire et/ou non normal à l'axe de la fraise. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>Le fond de poche 3D n'est PAS disponible dans cette opération</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Envisagez de basculer la propriété InverseAngle et de recalculer l'opération. - - - - Processing subs individually ... - Traitement individuel des subs... - - - - Depth Warning - Avertissement de Profondeur - - - - Verify final depth of pocket shaped by vertical faces. - Vérifiez la profondeur finale de la poche formée de faces verticales. - - - - Processing model as a whole ... - Traitement du modèle dans son ensemble ... - - - - Can not identify loop. - Impossible d'identifier la boucle. - Edit Éditer - - Heights - Hauteur + + %s is not a Base Model object of the job %s + %s n’est pas un objet Modèle de Base de la tâche %s - - AreaOp Operation - Opération AreaOp + + Base shape %s already in the list + La forme de base %s se trouve déjà dans la liste - - Uncreate AreaOp Operation - Ne pas crée d'opération AreaOp + + Ignoring vertex + Ignorer le sommet - - Pick Start Point - Sélectionner le point de départ + + Didn't find job %s + Ne peux trouver la tâche %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Angle d'arête de coupe invalide %.2f, doit être entre <90° et >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle d'arête de coupe invalide %.2f, doit être >0° et <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Angle d'arrête tranchante (%.2f) cause une longueur négative de la pointe de l'outil @@ -1133,19 +1005,127 @@ Objet de base %s.%s rejeté par opération - - %s is not a Base Model object of the job %s - %s n’est pas un objet Modèle de Base de la tâche %s + + Heights + Hauteur - - Base shape %s already in the list - La forme de base %s se trouve déjà dans la liste + + AreaOp Operation + Opération AreaOp - - Ignoring vertex - Ignorer le sommet + + Uncreate AreaOp Operation + Ne pas crée d'opération AreaOp + + + + Pick Start Point + Sélectionner le point de départ + + + + +<br>Pocket is based on extruded surface. + +<br>La poche est basée sur la surface extrudée. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Le bas de la poche peut être non planaire et/ou non normal à l'axe de la fraise. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>Le fond de poche 3D n'est PAS disponible dans cette opération</i>. + + + + Face appears misaligned after initial rotation. + La face semble mal alignée après la rotation initiale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Envisagez de basculer la propriété 'InverseAngle' et de recalculer. + + + + Multiple faces in Base Geometry. + Faces multiples dans la géométrie de base. + + + + Depth settings will be applied to all faces. + Les paramètres de profondeur seront appliqués à toutes les faces. + + + + EnableRotation property is 'Off'. + La propriété EnableRotation est 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Envisagez de basculer la propriété InverseAngle et de recalculer l'opération. + + + + Processing subs individually ... + Traitement individuel des subs... + + + + Depth Warning + Avertissement de Profondeur + + + + Verify final depth of pocket shaped by vertical faces. + Vérifiez la profondeur finale de la poche formée de faces verticales. + + + + Processing model as a whole ... + Traitement du modèle dans son ensemble ... + + + + Can not identify loop. + Impossible d'identifier la boucle. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Un démarrage adaptatif plan est indisponible. Le non-plan sera tenté. + + + + The non-planar adaptive start is also unavailable. + Le démarrage adaptatif non plan est également indisponible. + + + + Rotated to inverse angle. + Pivoté à l'angle inverse. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + La(les) fonction(s) sélectionnée(s) nécessite(nt) 'Activer la rotation : A(x)' pour l'accès. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + La(les) fonction(s) sélectionnée(s) nécessite(nt) 'Activer la rotation : B(y)' pour l'accès. @@ -1173,39 +1153,59 @@ Toujours sélectionner l'arrête inférieure du trou lorsque vous utilisez une arrête. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Un démarrage adaptatif plan est indisponible. Le non-plan sera tenté. + + Unable to create path for face(s). + Impossible de créer le chemin pour la (les) face(s). - - The non-planar adaptive start is also unavailable. - Le démarrage adaptatif non plan est également indisponible. + + Engraving Operations + Opérations de gravure - - Didn't find job %s - Ne peux trouver la tâche %s + + 3D Operations + Opérations de 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Angle d'arête de coupe invalide %.2f, doit être entre <90° et >=0° + + Project Setup + Configuration du projet - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angle d'arête de coupe invalide %.2f, doit être >0° et <=180° + + Tool Commands + Commandes d’outil - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° + + New Operations + Nouvelles opérations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Angle d'arrête tranchante (%.2f) cause une longueur négative de la pointe de l'outil + + Path Modification + Modification du parcours + + + + Helpful Tools + Outils utiles + + + + &Path + &Parcours + + + + Path Dressup + Optimisation de trajectoire + + + + Supplemental Commands + Commandes additionnelles @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Objets de base à graver - - - - The vertex index to start the path from - L'index du sommet pour démarrer le chemin depuis - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Crée une parcours de gravure autour d’une esquisse forme de texte + + + Additional base objects to be engraved + Objets de base à graver + + + + The vertex index to start the path from + L'index du sommet pour démarrer le chemin depuis + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s n’a aucune propriété %s (%s)) - Cannot find property %s of %s Ne peut trouver la propriété %s de %s + + + %s has no property %s (%s)) + %s n’a aucune propriété %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Crée un objet percours Helix à partir d'une fonction de l'objet de base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Rayon de départ - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Crée un objet percours Helix à partir d'une fonction de l'objet de base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Objet brut " %s " non pris en charge + + + + Unsupported stock type %s (%d) + Type de brut " %s (%d) " non pris en charge + + + + Stock not from Base bound box! + Le brut ne tient pas dans les bases de la boîte englobante! + + + + Stock not a box! + Le brut n'est pas une boîte ! + + + + Stock not a cylinder! + Le brut n'est pas un cylindre ! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Version non prise en charge du modèle PathJob %s - - - Unsupported stock object %s - Objet brut " %s " non pris en charge - - - - Unsupported stock type %s (%d) - Type de brut " %s (%d) " non pris en charge - - - - Stock not from Base bound box! - Le brut ne tient pas dans les bases de la boîte englobante! - - - - Stock not a box! - Le brut n'est pas une boîte ! - - - - Stock not a cylinder! - Le brut n'est pas un cylindre ! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Géométrie de base - - - - Base Location - Emplacement de base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth ne peut pas être modifiée pour cette opération. -S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner une opération différente. - - - - Depths - Profondeurs - - - - Operation - Opération - The base geometry for this operation @@ -1751,6 +1714,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un User Assigned Label Label assigné par l'utilisateur + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Coolant option for this operation Option de lubrification pour cette opération + + + Base Geometry + Géométrie de base + + + + Base Location + Emplacement de base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth ne peut pas être modifiée pour cette opération. +S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner une opération différente. + + + + Depths + Profondeurs + + + + Operation + Opération + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathPocket - - Choose how to process multiple Base Geometry features. - Choisissez comment traiter plusieurs fonctions de géométrie de base. + + 3D Pocket + Évidement 3D - - Pass Extension - Ajouter une extension - - - - The distance the facing operation will extend beyond the boundary shape. - L’opération de surfaçage ira au-delà de la limite de la surface. + + Creates a Path 3D Pocket object from a face or faces + Crée un objet poche 3D à partir d'arêtes ou d'une surface @@ -1858,14 +1853,29 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Surfaces verticales ne forment pas une boucle - ignoré - - 3D Pocket - Évidement 3D + + Adaptive clearing and profiling + Surfaçage et profilage adaptif - - Creates a Path 3D Pocket object from a face or faces - Crée un objet poche 3D à partir d'arêtes ou d'une surface + + Pass Extension + Ajouter une extension + + + + The distance the facing operation will extend beyond the boundary shape. + L’opération de surfaçage ira au-delà de la limite de la surface. + + + + Choose how to process multiple Base Geometry features. + Choisissez comment traiter plusieurs fonctions de géométrie de base. + + + + Final depth set below ZMin of face(s) selected. + Profondeur finale définie sous ZMin de face(s) sélectionnée(s). @@ -1892,16 +1902,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Pocket object from a face or faces Crée un objet poche à partir d'arêtes ou d'une surface - - - Adaptive clearing and profiling - Surfaçage et profilage adaptif - - - - Final depth set below ZMin of face(s) selected. - Profondeur finale définie sous ZMin de face(s) sélectionnée(s). - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathProfile + + + Profile based on face or faces + Profil basé sur une ou des faces + Profile @@ -2020,11 +2025,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profil basé sur une ou des faces - Edge Profile @@ -2435,26 +2435,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathToolBit - - - Create Tool - Créer un outil - - - - Creates a new ToolBit object - Crée un nouvel objet ToolBit - - - - Save Tool as... - Enregistrer l'outil sous... - - - - Save Tool - Sauver l'outil - - - - Save an existing ToolBit object to a file - Enregistrer un objet ToolBit existant dans un fichier - - - - Load Tool - Charger l'outil - - - - Load an existing ToolBit object from a file - Charger un objet ToolBit existant depuis un fichier - - - - Edit ToolBit - Modifier ToolBit - - - - Uncreate ToolBit - Annuler la création de ToolBit - - - - Create ToolBit - Créer ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Chipload as per manufacturer Avance par dent + + + Edit ToolBit + Modifier ToolBit + + + + Uncreate ToolBit + Annuler la création de ToolBit + + + + Create ToolBit + Créer ToolBit + + + + Create Tool + Créer un outil + + + + Creates a new ToolBit object + Crée un nouvel objet ToolBit + + + + Save Tool as... + Enregistrer l'outil sous... + + + + Save Tool + Sauver l'outil + + + + Save an existing ToolBit object to a file + Enregistrer un objet ToolBit existant dans un fichier + + + + Load Tool + Charger l'outil + + + + Load an existing ToolBit object from a file + Charger un objet ToolBit existant depuis un fichier + PathToolBitLibrary @@ -2790,6 +2790,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathToolController + + + Error updating TC: %s + Erreur de mise à jour des taux: %s + The active tool @@ -2840,11 +2845,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un The tool used by this controller L’outil utilisé par ce contrôleur - - - Error updating TC: %s - Erreur de mise à jour des taux: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_DressupPathBoundary - - - The base path to modify - Le parcours de base à modifier - - - - Solid object to be used to limit the generated Path. - Objet solide à utiliser pour limiter la trajectpore générée. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Détermine si la limite décrit un masque d'inclusion ou d'exclusion. - - - - The selected object is not a path - L'objet sélectionné n'est pas un parcours - Create a Boundary dressup @@ -3273,6 +3253,26 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Path Boundary Dress-up Créer un habillage de limite de trajectoire + + + The base path to modify + Le parcours de base à modifier + + + + Solid object to be used to limit the generated Path. + Objet solide à utiliser pour limiter la trajectpore générée. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Détermine si la limite décrit un masque d'inclusion ou d'exclusion. + + + + The selected object is not a path + L'objet sélectionné n'est pas un parcours + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_DressupTag - - - Cannot copy tags - internal error - Impossible de copier les balises - erreur interne - - - - Create a Tag dressup - Créer une trajectoire additionnelle Languettes de maintien - - - - Tag Dress-up - Trajectoire additionnelle Languettes de maintien - - - - Creates a Tag Dress-up object from a selected path - Crée une trajectoire additionnelle Languettes de maintien depuis le parcours sélectionné - - - - Please select one path object - Veuillez sélectionner une objet parcours - - - - Create Tag Dress-up - Crée une trajectoire additionnelle Languettes de maintien - - - - Holding Tag - Languette de maintien - The base path to modify @@ -3374,6 +3339,56 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Factor determining the # of segments used to approximate rounded tags. Facteur déterminant le nombre de segments utilisés pour approximer les languettes arrondies. + + + Cannot insert holding tags for this path - please select a Profile path + Impossible d'ajouter des languettes de maintien pour ce parcours - Veuillez sélectionner un parcours Contour + + + + The selected object is not a path + L'objet sélectionné n'est pas un parcours + + + + Please select a Profile object + Veuillez sélectionner un objet Contour + + + + Holding Tag + Languette de maintien + + + + Cannot copy tags - internal error + Impossible de copier les balises - erreur interne + + + + Create a Tag dressup + Créer une trajectoire additionnelle Languettes de maintien + + + + Tag Dress-up + Trajectoire additionnelle Languettes de maintien + + + + Creates a Tag Dress-up object from a selected path + Crée une trajectoire additionnelle Languettes de maintien depuis le parcours sélectionné + + + + Please select one path object + Veuillez sélectionner une objet parcours + + + + Create Tag Dress-up + Crée une trajectoire additionnelle Languettes de maintien + No Base object found. @@ -3394,21 +3409,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Base Path is empty. Le parcours de base est vide. - - - The selected object is not a path - L'objet sélectionné n'est pas un parcours - - - - Please select a Profile object - Veuillez sélectionner un objet Contour - - - - Cannot insert holding tags for this path - please select a Profile path - Impossible d'ajouter des languettes de maintien pour ce parcours - Veuillez sélectionner un parcours Contour - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Job + + + Job + Tâche + + + + Creates a Path Job object + Crée un objet parcours de travail + + + + Export Template + Modèle d'exportation + + + + Exports Path Job as a template to be used for other jobs + Exporte l'arbre de projet comme gabarit pour les prochains projets + + + + Create Job + Créer tâche + Edit Job @@ -3554,31 +3579,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Model Selection Sélection du modèle - - - Create Job - Créer tâche - - - - Job - Tâche - - - - Creates a Path Job object - Crée un objet parcours de travail - - - - Export Template - Modèle d'exportation - - - - Exports Path Job as a template to be used for other jobs - Exporte l'arbre de projet comme gabarit pour les prochains projets - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Probe - - Select Output File - Sélectionnez le fichier de sortie + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Tous les fichiers (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Sélectionnez le fichier de sortie diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm index fcb903f820..34541a0e71 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index c32a34b0dc..7e475816d2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Engadir unha Parada, obrigatoria ou opcional, ó programa - - - - The base object this collision refers to - O obxecto base desta colisión refírese a - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controla como se move a ferramenta nas esquinas. Por defecto=Redondo - - - - Maximum distance before a miter join is truncated - Distancia máxima antes de que unha unión de inglete esté truncada - - - - The base geometry of this toolpath - A xeometría base desta traxectoria de ferramenta - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor extra para afastarse do perfil final bo para a traxectoria da ferramenta de desbaste - - - - Profile holes as well as the outline - Perfilar buratos así como a súa contorna - - - - Profile the outline - Perfilar a contorna - - - - Profile round holes - Perfil de buratos redondos - - - - Side of edge that tool should cut - Lado da traxectoria que a ferramenta debe cortar - - - - Make True, if using Cutter Radius Compensation - Facer verdadeiro, se se usa a compensación de radio de ferramenta - - - - Reverse direction of pocket operation. - Dirección inversa da operación de baleirado. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Ángulo inverso. Exemplo: -22.5 -> 22.5 grados. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - O obxecto que será acadado con este salto - - - - The Z height of the hop - A altura Z do salto - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Facer verdadeiro, se se especifica un punto de principio - - - - Incremental Drill depth before retracting to clear chips - Fondura de tradeado incrementar antes de retraerse para limpar as labras - - - - Enable pecking - Habilitar pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Habilitar espera - - - - Calculate the tip length and subtract from final depth - Calcula a lonxitude da pista e sustrae dende a profundidade final - - - - Controls how tool retracts Default=G98 - Controis como retraer ferramenta por Defecto=G98 - - - - The height where feed starts and height during retract tool when path is finished - A altura onde arrinca o avance e mais a altura onde a ferramenta se retrae cando a traxectoria está rematada - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Número de suxeicións - - - - Make False, to prevent operation from generating code - Facer Falso, para impedir a operación dende o código xerado - - - - Extra offset to apply to the operation. Direction is operation dependent. - Desfase extra para aplicar a operación. A dirección é dependente da operación. - - - - Start pocketing at center or boundary - Principiar baleirando no centro ou na beira - - - - Percent of cutter diameter to step over on each pass - Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe - - - - Angle of the zigzag pattern - Ángulo do patrón zigzag - - - - Clearing pattern to use - Patrón de limpado a usar - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientación do plano de traxectoria CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Facer verdadeiro, se se especifica un punto de principio + The path to be copied A traxectoria a ser copiada + + + The base geometry of this toolpath + A xeometría base desta traxectoria de ferramenta + The tool controller that will be used to calculate the path Controlador da ferramenta que se usará para calcular a traxectoria - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Altura a erguer durante a acción do vértice - - Ramping Method - Método de rampa + + The object to be reached by this hop + O obxecto que será acadado con este salto - - Which feed rate to use for ramping - Que velocidade de avance se debe usar para a rampa + + The Z height of the hop + A altura Z do salto - - Custom feedrate - Adianto persoal + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Debe a máscara ignorar comandos de movemento sobre DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - A profundidade na que se habilita a máscara na rampa. Por riba destas rampas non se xeran, pero os comandos de movemento pásanse a través deles tal e como estean. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Método de patrón - - - - Shape to use for calculating Boundary - Forma a usar para calcular o Contorno - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Número de suxeicións + + + + Make False, to prevent operation from generating code + Facer Falso, para impedir a operación dende o código xerado + + + + Ramping Method + Método de rampa + + + + Which feed rate to use for ramping + Que velocidade de avance se debe usar para a rampa + + + + Custom feedrate + Adianto persoal + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Debe a máscara ignorar comandos de movemento sobre DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + A profundidade na que se habilita a máscara na rampa. Por riba destas rampas non se xeran, pero os comandos de movemento pásanse a través deles tal e como estean. + + + + Incremental Drill depth before retracting to clear chips + Fondura de tradeado incrementar antes de retraerse para limpar as labras + + + + Enable pecking + Habilitar pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Habilitar espera + + + + Calculate the tip length and subtract from final depth + Calcula a lonxitude da pista e sustrae dende a profundidade final + + + + Controls how tool retracts Default=G98 + Controis como retraer ferramenta por Defecto=G98 + + + + The height where feed starts and height during retract tool when path is finished + A altura onde arrinca o avance e mais a altura onde a ferramenta se retrae cando a traxectoria está rematada + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Dirección inversa da operación de baleirado. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Ángulo inverso. Exemplo: -22.5 -> 22.5 grados. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientación do plano de traxectoria CNC + + + + Shape to use for calculating Boundary + Forma a usar para calcular o Contorno + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + O obxecto base desta colisión refírese a + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Desfase extra para aplicar a operación. A dirección é dependente da operación. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Principiar baleirando no centro ou na beira - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Ángulo do patrón zigzag + + + + Clearing pattern to use + Patrón de limpado a usar + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Engadir unha Parada, obrigatoria ou opcional, ó programa + + + + Pattern method + Método de patrón + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controla como se move a ferramenta nas esquinas. Por defecto=Redondo + + + + Maximum distance before a miter join is truncated + Distancia máxima antes de que unha unión de inglete esté truncada + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor extra para afastarse do perfil final bo para a traxectoria da ferramenta de desbaste + + + + Profile holes as well as the outline + Perfilar buratos así como a súa contorna + + + + Profile the outline + Perfilar a contorna + + + + Profile round holes + Perfil de buratos redondos + + + + Side of edge that tool should cut + Lado da traxectoria que a ferramenta debe cortar + + + + Make True, if using Cutter Radius Compensation + Facer verdadeiro, se se usa a compensación de radio de ferramenta @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operacións de gravado - - - - 3D Operations - Operacións 3D - - - - Project Setup - Configuración do proxecto - - - - Tool Commands - Comandos de ferramenta - - - - New Operations - Operacións novas - - - - Path Modification - Modificación da traxectoria - - - - Helpful Tools - Ferramentas útiles - - - - &Path - &Traxectoria - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Activar crear traxectoria para face(s). - - - - Face appears misaligned after initial rotation. - A face aparece desaliñada despois da rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considera trocar ao ángulo inverso e volver computar. - - - - Multiple faces in Base Geometry. - Múltiples faces en Xeometría Base. - - - - Depth settings will be applied to all faces. - Os axustes de profundidade serán aplicados a tódalas faces. - - - - EnableRotation property is 'Off'. - A propiedade Activar Rotación está 'Desactivada'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>O baleirado está baseado nunha superficie extruída. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>A parte baixa do baleirado debe non ser plana e/ou non normal ao eixe fuso. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D do baleirado baixo NON está dispoñible nesta operación</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Considera trocar ao ángulo inverso e recalcular a operación. - - - - Processing subs individually ... - Procesando sub individuais... - - - - Depth Warning - Atención Profundidade - - - - Verify final depth of pocket shaped by vertical faces. - Verificar profundidade final do forma baleirada por faces verticais. - - - - Processing model as a whole ... - Procesando modelo como un conxunto... - - - - Can not identify loop. - Non podo identificar o ciclo. - Edit Editar - - Heights - Alturas + + %s is not a Base Model object of the job %s + %s non é un obxecto de Modelo Base do traballo %s - - AreaOp Operation - Operación AreaOp + + Base shape %s already in the list + A Forma Base %s xa na lista - - Uncreate AreaOp Operation - Elimina Operación de AreaOp + + Ignoring vertex + Ignorar vértice - - Pick Start Point - Escolmar punto de arrinque + + Didn't find job %s + Non atopo chollo %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Ángulo de corte non válido %.2f, debe ser <90° e >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ángulo do borde de corte (%.2f) resultado en lonxitude negativa da punta da ferramenta @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s non é un obxecto de Modelo Base do traballo %s + + Heights + Alturas - - Base shape %s already in the list - A Forma Base %s xa na lista + + AreaOp Operation + Operación AreaOp - - Ignoring vertex - Ignorar vértice + + Uncreate AreaOp Operation + Elimina Operación de AreaOp + + + + Pick Start Point + Escolmar punto de arrinque + + + + +<br>Pocket is based on extruded surface. + +<br>O baleirado está baseado nunha superficie extruída. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>A parte baixa do baleirado debe non ser plana e/ou non normal ao eixe fuso. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D do baleirado baixo NON está dispoñible nesta operación</i>. + + + + Face appears misaligned after initial rotation. + A face aparece desaliñada despois da rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considera trocar ao ángulo inverso e volver computar. + + + + Multiple faces in Base Geometry. + Múltiples faces en Xeometría Base. + + + + Depth settings will be applied to all faces. + Os axustes de profundidade serán aplicados a tódalas faces. + + + + EnableRotation property is 'Off'. + A propiedade Activar Rotación está 'Desactivada'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Considera trocar ao ángulo inverso e recalcular a operación. + + + + Processing subs individually ... + Procesando sub individuais... + + + + Depth Warning + Atención Profundidade + + + + Verify final depth of pocket shaped by vertical faces. + Verificar profundidade final do forma baleirada por faces verticais. + + + + Processing model as a whole ... + Procesando modelo como un conxunto... + + + + Can not identify loop. + Non podo identificar o ciclo. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Activar crear traxectoria para face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Operacións de gravado - - Didn't find job %s - Non atopo chollo %s + + 3D Operations + Operacións 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Ángulo de corte non válido %.2f, debe ser <90° e >=0° + + Project Setup + Configuración do proxecto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Comandos de ferramenta - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° + + New Operations + Operacións novas - - Cutting Edge Angle (%.2f) results in negative tool tip length - Ángulo do borde de corte (%.2f) resultado en lonxitude negativa da punta da ferramenta + + Path Modification + Modificación da traxectoria + + + + Helpful Tools + Ferramentas útiles + + + + &Path + &Traxectoria + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Obxectos base adicionais que deben gravarse - - - - The vertex index to start the path from - O vértice indexa o inicio dende a traxectoria - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Crea un percorrido gravado baseado nun TextoForma de bosquexo + + + Additional base objects to be engraved + Obxectos base adicionais que deben gravarse + + + + The vertex index to start the path from + O vértice indexa o inicio dende a traxectoria + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s non ten ningunha propiedade %s (%s)) - Cannot find property %s of %s Non podo atopar propiedade %s de %s + + + %s has no property %s (%s)) + %s non ten ningunha propiedade %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Crea un obxecto de Perforación Helicoidal a partir dunha característica dun obxecto + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Crea un obxecto de Perforación Helicoidal a partir dunha característica dun obxecto - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Obxecto de stock non soportado %s + + + + Unsupported stock type %s (%d) + Tipo de stock non soportado %s (%d) + + + + Stock not from Base bound box! + Stock non dende caixa atada á Base! + + + + Stock not a box! + Non unha caixa de existencias! + + + + Stock not a cylinder! + Non un cilindo de existencias! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Non soportada a plantilla PathJob versión %s - - - Unsupported stock object %s - Obxecto de stock non soportado %s - - - - Unsupported stock type %s (%d) - Tipo de stock non soportado %s (%d) - - - - Stock not from Base bound box! - Stock non dende caixa atada á Base! - - - - Stock not a box! - Non unha caixa de existencias! - - - - Stock not a cylinder! - Non un cilindo de existencias! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Xeometría Base - - - - Base Location - Localización Base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth non pode modificar para esta operación. -Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opción diferente. - - - - Depths - Profundidades - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc User Assigned Label Etiqueta Asinada a Usuario + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Coolant option for this operation Coolant option for this operation + + + Base Geometry + Xeometría Base + + + + Base Location + Localización Base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth non pode modificar para esta operación. +Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opción diferente. + + + + Depths + Profundidades + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Baleirado 3D - - Pass Extension - Extensión de Paso - - - - The distance the facing operation will extend beyond the boundary shape. - A distancia da operación de refrentado se extenderá máis alá da forma límite. + + Creates a Path 3D Pocket object from a face or faces + Crea un obxecto Traxectoria 3D baleiro dende unha face ou faces @@ -1858,14 +1853,29 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc As caras verticais non forman un ciclo - ignorando - - 3D Pocket - Baleirado 3D + + Adaptive clearing and profiling + Limpeza e perfilado adaptativo - - Creates a Path 3D Pocket object from a face or faces - Crea un obxecto Traxectoria 3D baleiro dende unha face ou faces + + Pass Extension + Extensión de Paso + + + + The distance the facing operation will extend beyond the boundary shape. + A distancia da operación de refrentado se extenderá máis alá da forma límite. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Pocket object from a face or faces Crea un obxecto Traxectoria baleiro dende unha face ou faces - - - Adaptive clearing and profiling - Limpeza e perfilado adaptativo - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathProfile + + + Profile based on face or faces + Perfil baseado en face ou faces + Profile @@ -2020,11 +2025,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Perfil baseado en face ou faces - Edge Profile @@ -2435,26 +2435,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathToolController + + + Error updating TC: %s + Error ao actualizar TC: %s + The active tool @@ -2840,11 +2845,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc The tool used by this controller Ferramenta usada por este controlador - - - Error updating TC: %s - Error ao actualizar TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_DressupPathBoundary - - - The base path to modify - A traxectoria base para modificar - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - O obxecto escolmado non é unha traxectoria - Create a Boundary dressup @@ -3273,6 +3253,26 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + A traxectoria base para modificar + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + O obxecto escolmado non é unha traxectoria + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Crea un aspecto de etiqueta - - - - Tag Dress-up - Aspecto de Etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un obxecto de tipo aspecto de etiqueta desde unha ruta escolmada - - - - Please select one path object - Por favor, escolme un obxecto traxectoria - - - - Create Tag Dress-up - Crea Etiqueta de aspecto - - - - Holding Tag - Etiquetas de subxección - The base path to modify @@ -3374,6 +3339,56 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Factor determining the # of segments used to approximate rounded tags. Factor determinante do # de segmentos usados para aproximar nas etiquetas redondeadas. + + + Cannot insert holding tags for this path - please select a Profile path + Non se pode inserir etiquetas de retención para traxectoria - fai o favor de escolmar unha traxectoria do Perfil + + + + The selected object is not a path + O obxecto escolmado non é unha traxectoria + + + + Please select a Profile object + Por favor escolma un obxecto Perfil + + + + Holding Tag + Etiquetas de subxección + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Crea un aspecto de etiqueta + + + + Tag Dress-up + Aspecto de Etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un obxecto de tipo aspecto de etiqueta desde unha ruta escolmada + + + + Please select one path object + Por favor, escolme un obxecto traxectoria + + + + Create Tag Dress-up + Crea Etiqueta de aspecto + No Base object found. @@ -3394,21 +3409,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Base Path is empty. Ruta Base está baleira. - - - The selected object is not a path - O obxecto escolmado non é unha traxectoria - - - - Please select a Profile object - Por favor escolma un obxecto Perfil - - - - Cannot insert holding tags for this path - please select a Profile path - Non se pode inserir etiquetas de retención para traxectoria - fai o favor de escolmar unha traxectoria do Perfil - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Job + + + Job + Traballo + + + + Creates a Path Job object + Crea un obxecto traballo da traxectoria + + + + Export Template + Exporta Plantilla + + + + Exports Path Job as a template to be used for other jobs + Exporta Traxectoria de Traballo como plantilla usada para outros traballos + + + + Create Job + Crear traballo + Edit Job @@ -3554,31 +3579,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Model Selection Model Selection - - - Create Job - Crear traballo - - - - Job - Traballo - - - - Creates a Path Job object - Crea un obxecto traballo da traxectoria - - - - Export Template - Exporta Plantilla - - - - Exports Path Job as a template to be used for other jobs - Exporta Traxectoria de Traballo como plantilla usada para outros traballos - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Probe - - Select Output File - Escolmar ficheiro de saída + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Tódolos ficheiros (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Escolmar ficheiro de saída diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm index 6ef8ff5c8b..e521c06b3a 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 97b62e766b..9bcef43c85 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - U program dodajte neobavezno ili obavezno zaustavljanje - - - - The base object this collision refers to - Osnovni objekt na kojem se temelji sudar - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Kontrolira kako se alat kreće po uglovima. Zadano=krug - - - - Maximum distance before a miter join is truncated - Maksimalna udaljenost prije nego je pridružena kosina odrezana - - - - The base geometry of this toolpath - Osnovna geometrija ove obrade staze - - - - Extra value to stay away from final profile- good for roughing toolpath - Dodatna vrijednost za izbjegavanje krajnjeg profila - dobro za hrapavost staza obrade - - - - Profile holes as well as the outline - Rupe u profilu, kao i obrisi vanjske linije - - - - Profile the outline - Profil vanjske konture - - - - Profile round holes - Profil okrugle rupe - - - - Side of edge that tool should cut - Strana ruba koju alat treba rezati - - - - Make True, if using Cutter Radius Compensation - Postavi na istinito, ako koristite kompenzaciju radijusa glodala - - - - Reverse direction of pocket operation. - Obrnuti smjer obrade utora. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Obrnuti kut. Primjer: -22,5 -> 22,5 stupnjeva. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Objekt do kojeg treba doći ovim skokom - - - - The Z height of the hop - Z visina ovog skoka - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Prikažite privremene objekte za izgradnju staza kada je modul u stanju DEBUG moda. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Postavite na Točno, ako specificirate Početnu točku - - - - Incremental Drill depth before retracting to clear chips - Koračna dubina bušenja prije povlačenja za čišćenje strugotine - - - - Enable pecking - Omogući kidanje strugotine - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Omogući pauzu - - - - Calculate the tip length and subtract from final depth - Izračunajte duljinu vrha i oduzmite ga od krajnje dubine - - - - Controls how tool retracts Default=G98 - Kontrolira kako alat povlači zadanu vrijednost = G98 - - - - The height where feed starts and height during retract tool when path is finished - Visina gdje započinje pomak i visina tijekom povlačenja alata kada je staza gotova - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Pomak od učvrščenja - - - - Make False, to prevent operation from generating code - Postavite na netočno da spriječite generiranje koda - - - - Extra offset to apply to the operation. Direction is operation dependent. - Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji. - - - - Start pocketing at center or boundary - Započnite utor na sredini ili rubu - - - - Percent of cutter diameter to step over on each pass - Postotak promjera glodala koji bi prelazio u svakom prolazu - - - - Angle of the zigzag pattern - Kut cik-cak uzorka - - - - Clearing pattern to use - Uzorci čišćenja za korištenje - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orijentacijska ravnina CNC-staze - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -422,6 +152,13 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Postavite geometrijski uzorak čišćenja koji će se koristiti za operaciju. + + + The yaw angle used for certain clearing patterns @@ -437,26 +174,42 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Dovršite operaciju u jednom prolazu na dubini ili višestruki prolazi do krajnje dubine. + Set the start point for the cut pattern. - Set the start point for the cut pattern. + Postavite početnu točku rezanja uzorka. + + Choose location of the center point for starting the cut pattern. - Choose location of the center point for starting the cut pattern. + Odaberite mjesto središnje točke za početak rezanja uzorka. Profile the edges of the selection. - Profile the edges of the selection. + Profili od rubova odabira. + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Postavite postotak prelaska na temelju promjera alata. + + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -482,42 +235,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Postavite na Točno, ako specificirate Početnu točku + The path to be copied Put koji treba kopirati + + + The base geometry of this toolpath + Osnovna geometrija ove obrade staze + The tool controller that will be used to calculate the path Alat kontroler koji će se koristiti za izračunavanje staze - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti uvelike povećavaju vrijeme obrade. - - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti ne povećavaju vrijeme obrade. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -539,54 +281,39 @@ Visina podizanja kod kutne akcije - - Ramping Method - Rampa metoda + + The object to be reached by this hop + Objekt do kojeg treba doći ovim skokom - - Which feed rate to use for ramping - Brzina pomicanja za kosinu + + The Z height of the hop + Z visina ovog skoka - - Custom feedrate - Korisnički prilagođena brzina pomicanja + + X offset between tool and probe + X pomak između alata i sonde - - Custom feed rate - Korisnički prilagođena brzina pomicanja + + Y offset between tool and probe + Y pomak između alata i sonde - - Should the dressup ignore motion commands above DressupStartDepth - Treba li ravnanje ignorirati naredbe pokreta iznad DressupStartDepth + + Number of points to probe in X direction + Broj točaka sonde za ispitivanje u smjeru X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Dubina na kojoj je omogućeno korištenje rampe. Iznad ove dubine, rampe se ne generiraju, već se naredbe za kretanje propuštaju nepromijenjene. + + Number of points to probe in Y direction + Broj točaka sonde za ispitivanje u smjeru Y - - Pattern method - Metoda uzorka - - - - Shape to use for calculating Boundary - Oblik koji se koristi za izračunavanje Granice - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + Izlazno mjesto za podatke sonde da se napišu @@ -633,6 +360,227 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Pomak od učvrščenja + + + + Make False, to prevent operation from generating code + Postavite na netočno da spriječite generiranje koda + + + + Ramping Method + Rampa metoda + + + + Which feed rate to use for ramping + Brzina pomicanja za kosinu + + + + Custom feedrate + Korisnički prilagođena brzina pomicanja + + + + Custom feed rate + Korisnički prilagođena brzina pomicanja + + + + Should the dressup ignore motion commands above DressupStartDepth + Treba li ravnanje ignorirati naredbe pokreta iznad DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Dubina na kojoj je omogućeno korištenje rampe. Iznad ove dubine, rampe se ne generiraju, već se naredbe za kretanje propuštaju nepromijenjene. + + + + Incremental Drill depth before retracting to clear chips + Koračna dubina bušenja prije povlačenja za čišćenje strugotine + + + + Enable pecking + Omogući kidanje strugotine + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Omogući pauzu + + + + Calculate the tip length and subtract from final depth + Izračunajte duljinu vrha i oduzmite ga od krajnje dubine + + + + Controls how tool retracts Default=G98 + Kontrolira kako jako se alat povlači=G98 + + + + The height where feed starts and height during retract tool when path is finished + Visina gdje započinje pomak i visina tijekom povlačenja alata kada je staza gotova + + + + Controls how tool retracts Default=G99 + Kontrolira kako se alat povlači nazad = G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Omogućite rotaciju za pristup džepovima / područjima koja nisu normalna do Z osi. + + + + + + Reverse direction of pocket operation. + Obrnuti smjer obrade utora. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Obrnuti kut. Primjer: -22,5 -> 22,5 stupnjeva. + + + + Attempt the inverse angle for face access if original rotation fails. + Pokušajte obrnuti kut za pristup licu ako izvorna rotacija ne uspije. + + + + + + Orientation plane of CNC path + Orijentacijska ravnina CNC-staze + + + + Shape to use for calculating Boundary + Oblik koji se koristi za izračunavanje Granice + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti uvelike povećavaju vrijeme obrade. + + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti ne povećavaju vrijeme obrade. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Utvrdite Z-dubinu odabranog lica kao najnižu vrijednost za završnu dubinu. Primjećuju se veće korisničke vrijednosti. + + + + + + The base object this collision refers to + Osnovni objekt na kojem se temelji sudar + + + + Enter custom start point for slot path. + Unesite prilagođenu početnu točku za putanju utora. + + + + Enter custom end point for slot path. + Unesite prilagođenu krajnju točku za putanju utora. + + + + Positive extends the beginning of the path, negative shortens. + Pozitivno produžuje početak puta, negativno skraćuje. + + + + + + Positive extends the end of the path, negative shortens. + Pozitivno produžuje završetak puta, negativno skraćuje. + + + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -649,29 +597,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X pomak između alata i sonde + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Smjer kojim staza obrade treba obilaziti dio (u smjeru kazaljke) CW ili (suprotno smjeru kazaljke) CCW - - Y offset between tool and probe - Y pomak između alata i sonde + + Extra offset to apply to the operation. Direction is operation dependent. + Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji. - - Number of points to probe in X direction - Broj točaka sonde za ispitivanje u smjeru X + + Start pocketing at center or boundary + Započnite utor na sredini ili rubu - - Number of points to probe in Y direction - Broj točaka sonde za ispitivanje u smjeru Y + + Percent of cutter diameter to step over on each pass + Postotak promjera glodala koji bi prelazio u svakom prolazu - - The output location for the probe data to be written - Izlazno mjesto za podatke sonde da se napišu + + Angle of the zigzag pattern + Kut cik-cak uzorka + + + + Clearing pattern to use + Uzorci čišćenja za korištenje + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + U program dodajte neobavezno ili obavezno zaustavljanje + + + + Pattern method + Metoda uzorka + + + + Extend the profile clearing beyond the Extra Offset. + Proširite čišćenje profila izvan dodatnog pomaka. + + + + Controls how tool moves around corners. Default=Round + Kontrolira kako se alat kreće po uglovima. Zadano=krug + + + + Maximum distance before a miter join is truncated + Maksimalna udaljenost prije nego je pridružena kosina odrezana + + + + Extra value to stay away from final profile- good for roughing toolpath + Dodatna vrijednost za izbjegavanje krajnjeg profila - dobro za hrapavost staza obrade + + + + Profile holes as well as the outline + Rupe u profilu, kao i obrisi vanjske linije + + + + Profile the outline + Profil vanjske konture + + + + Profile round holes + Profil okrugle rupe + + + + Side of edge that tool should cut + Strana ruba koju alat treba rezati + + + + Make True, if using Cutter Radius Compensation + Postavi na istinito, ako koristite kompenzaciju radijusa glodala @@ -899,178 +917,50 @@ Path - - - Engraving Operations - Graviranje operacije - - - - 3D Operations - 3D Operacije - - - - Project Setup - Projekt - Podešavanje - - - - Tool Commands - Naredbe Alata - - - - New Operations - Nove Operacije - - - - Path Modification - Modifikacija staze - - - - Helpful Tools - Korisni Alati - - - - &Path - &Staza - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Nije moguće stvoriti stazu za lice(a). - - - - Face appears misaligned after initial rotation. - Lice se čini pogrešno poravnano nakon početne rotacije. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. - - - - Multiple faces in Base Geometry. - Višestruka lica u Osnovnoj Geometriji. - - - - Depth settings will be applied to all faces. - Postavke dubine primijenit će se na sva lica. - - - - EnableRotation property is 'Off'. - Svojstvo Omogući Rotaciju je 'isključeno'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Utor se temelji na utisnutoj površini. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Dno utora može biti ne planarno i / ili nije normala na os vretena. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D dno utora NIJE dostupno u ovoj operaciji</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Razmislite o izmjeni svojstva "Obrnuti Kut" i ponovnom izračunavanju operacije. - - - - Processing subs individually ... - Obrađuje prijelaze pojedinačno ... - - - - Depth Warning - Upozorenje o nepodobnoj dubini - - - - Verify final depth of pocket shaped by vertical faces. - Provjerite konačnu dubinu utora u obliku vertikalnih površina. - - - - Processing model as a whole ... - Obrada modela u cjelini ... - - - - Can not identify loop. - Ne može se identificirati petlja. - Edit Uredi - - Heights - Visine + + %s is not a Base Model object of the job %s + %s nije objekt osnovnog modela zadatka %s - - AreaOp Operation - AreaOp operacija + + Base shape %s already in the list + Osnovni oblik %s već je na popisu - - Uncreate AreaOp Operation - Poništi rad AreaOp operacije + + Ignoring vertex + Ignoriranje hvatišta - - Pick Start Point - Odaberite početnu točku + + Didn't find job %s + Nisam našao zadatak %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Pogrešan rub rezanja kut %.2f, mora biti < 90 ° i > = 0 ° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Kut rezanja ruba (%.2f) rezultira negativnom duljinom vrha alata @@ -1138,19 +1028,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s nije objekt osnovnog modela zadatka %s + + Heights + Visine - - Base shape %s already in the list - Osnovni oblik %s već je na popisu + + AreaOp Operation + AreaOp operacija - - Ignoring vertex - Ignoriranje hvatišta + + Uncreate AreaOp Operation + Poništi rad AreaOp operacije + + + + Pick Start Point + Odaberite početnu točku + + + + +<br>Pocket is based on extruded surface. + +<br>Utor se temelji na utisnutoj površini. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Dno utora može biti ne planarno i / ili nije normala na os vretena. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D dno utora NIJE dostupno u ovoj operaciji</i>. + + + + Face appears misaligned after initial rotation. + Lice se čini pogrešno poravnano nakon početne rotacije. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. + + + + Multiple faces in Base Geometry. + Višestruka lica u Osnovnoj Geometriji. + + + + Depth settings will be applied to all faces. + Postavke dubine primijenit će se na sva lica. + + + + EnableRotation property is 'Off'. + Svojstvo Omogući Rotaciju je 'isključeno'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Razmislite o izmjeni svojstva "Obrnuti Kut" i ponovnom izračunavanju operacije. + + + + Processing subs individually ... + Obrađuje prijelaze pojedinačno ... + + + + Depth Warning + Upozorenje o nepodobnoj dubini + + + + Verify final depth of pocket shaped by vertical faces. + Provjerite konačnu dubinu utora u obliku vertikalnih površina. + + + + Processing model as a whole ... + Obrada modela u cjelini ... + + + + Can not identify loop. + Ne može se identificirati petlja. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1175,42 +1173,62 @@ Always select the bottom edge of the hole when using an edge. - Always select the bottom edge of the hole when using an edge. + Pri uporabi ruba uvijek odaberite donji rub rupe. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Nije moguće stvoriti stazu za lice(a). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Graviranje operacije - - Didn't find job %s - Nisam našao zadatak %s + + 3D Operations + 3D Operacije - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Pogrešan rub rezanja kut %.2f, mora biti < 90 ° i > = 0 ° + + Project Setup + Projekt - Podešavanje - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Naredbe Alata - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° + + New Operations + Nove Operacije - - Cutting Edge Angle (%.2f) results in negative tool tip length - Kut rezanja ruba (%.2f) rezultira negativnom duljinom vrha alata + + Path Modification + Modifikacija staze + + + + Helpful Tools + Korisni Alati + + + + &Path + &Staza + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1296,17 +1314,19 @@ How to join chamfer segments - How to join chamfer segments + Kako pridružiti segmente žlijeba + + Direction of Operation - Direction of Operation + Smjer operacije Side of Operation - Side of Operation + Strana operacije @@ -1394,16 +1414,6 @@ PathEngrave - - - Additional base objects to be engraved - Dodatni osnovni objekti koji trebaju biti gravirani - - - - The vertex index to start the path from - Indeks hvatišta od kojeg započinje staza - Engrave @@ -1414,6 +1424,16 @@ Creates an Engraving Path around a Draft ShapeString Stvara stazu graviranja oko "Draft ShapeString" + + + Additional base objects to be engraved + Dodatni osnovni objekti koji trebaju biti gravirani + + + + The vertex index to start the path from + Indeks hvatišta od kojeg započinje staza + PathFace @@ -1470,16 +1490,16 @@ PathGui - - - %s has no property %s (%s)) - %s nema svojstva %s (%s)) - Cannot find property %s of %s Ne mogu naći svojstvo %s od %s + + + %s has no property %s (%s)) + %s nema svojstva %s (%s)) + Tool Error @@ -1498,6 +1518,16 @@ PathHelix + + + Helix + Spirala + + + + Creates a Path Helix object from a features of a base object + Stvara objekt Staza Helix od svojstva osnovnog objekta + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1516,17 +1546,7 @@ Starting Radius - Starting Radius - - - - Helix - Spirala - - - - Creates a Path Helix object from a features of a base object - Stvara objekt Staza Helix od svojstva osnovnog objekta + Početni polumjer @@ -1536,6 +1556,31 @@ PathJob + + + Unsupported stock object %s + Nije podržan objekt osnove %s + + + + Unsupported stock type %s (%d) + Nije podržan tip osnove %s (%d) + + + + Stock not from Base bound box! + Osnova nije iz okvira ograničenja baze! + + + + Stock not a box! + Osnova nije kvadar! + + + + Stock not a cylinder! + Osnova nije cilindar! + The NC output file for this project @@ -1554,7 +1599,9 @@ An optional description for this job - An optional description for this job + Opcionalni opis za ovaj posao + + @@ -1579,7 +1626,9 @@ Split output into multiple gcode files - Split output into multiple gcode files + Razdjelite izlaz na više gcode datoteka + + @@ -1606,31 +1655,6 @@ Unsupported PathJob template version %s Ne podržana inačica predloška ZadatakStaze %s - - - Unsupported stock object %s - Nije podržan objekt osnove %s - - - - Unsupported stock type %s (%d) - Nije podržan tip osnove %s (%d) - - - - Stock not from Base bound box! - Osnova nije iz okvira ograničenja baze! - - - - Stock not a box! - Osnova nije kvadar! - - - - Stock not a cylinder! - Osnova nije cilindar! - Solids @@ -1674,43 +1698,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Osnovna geometrija - - - - Base Location - Osnovna lokacija - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Krajnja Dubina se ne može mijenjati za ovu operaciju. -Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite drugu operaciju. - - - - Depths - Dubine - - - - Operation - Operation - The base geometry for this operation @@ -1756,6 +1743,11 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr User Assigned Label Oznaka dodijeljena od korisnika + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1821,6 +1813,38 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Coolant option for this operation Coolant option for this operation + + + Base Geometry + Osnovna geometrija + + + + Base Location + Osnovna lokacija + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Krajnja Dubina se ne može mijenjati za ovu operaciju. +Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite drugu operaciju. + + + + Depths + Dubine + + + + Operation + Operacija + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1833,19 +1857,14 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Utor - - Pass Extension - Pređi produžetak - - - - The distance the facing operation will extend beyond the boundary shape. - Udaljenost operacije glodanja proširit će se preko granice oblika. + + Creates a Path 3D Pocket object from a face or faces + Stvara objekt staze 3D utora iz površine ili površina lica @@ -1863,14 +1882,29 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Okomite površine lica ne tvore petlju - ignoriranje - - 3D Pocket - 3D Utor + + Adaptive clearing and profiling + Prilagodljivo čišćenje i profiliranje - - Creates a Path 3D Pocket object from a face or faces - Stvara objekt staze 3D utora iz površine ili površina lica + + Pass Extension + Pređi produžetak + + + + The distance the facing operation will extend beyond the boundary shape. + Udaljenost operacije glodanja proširit će se preko granice oblika. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1897,16 +1931,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Creates a Path Pocket object from a face or faces Stvara objekt staze utora iz površine ili površina lica - - - Adaptive clearing and profiling - Prilagodljivo čišćenje i profiliranje - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1955,6 +1979,11 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathProfile + + + Profile based on face or faces + Put baziran na licu ili licima + Profile @@ -2025,11 +2054,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Put baziran na licu ili licima - Edge Profile @@ -2297,7 +2321,7 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr value error. - value error. + greška u vrijednosti. @@ -2440,26 +2464,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2565,6 +2569,26 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2679,56 +2703,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2769,6 +2743,56 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2795,6 +2819,11 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathToolController + + + Error updating TC: %s + Greška prilikom aktualiziranja Kontrolera alata: %s + The active tool @@ -2845,11 +2874,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr The tool used by this controller Alat korišten kod ovog upravljačkog sklopa - - - Error updating TC: %s - Greška prilikom aktualiziranja Kontrolera alata: %s - PathToolLibraryManager @@ -3233,26 +3257,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Path_DressupPathBoundary - - - The base path to modify - Osnovni staza za modifikaciju - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Odabrani objekt nije putanja staze - Create a Boundary dressup @@ -3278,6 +3282,26 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Osnovni staza za modifikaciju + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Odabrani objekt nije putanja staze + Path_DressupRampEntry @@ -3304,41 +3328,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Napravi držeće trake Dress-up - - - - Tag Dress-up - Držeća traka Dress-up - - - - Creates a Tag Dress-up object from a selected path - Stvara držeće trake objekt iz odabrane staze - - - - Please select one path object - Odaberite jedan objekt staze - - - - Create Tag Dress-up - Napravi držeće trake Dress-up - - - - Holding Tag - Držeća traka - The base path to modify @@ -3379,6 +3368,56 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Factor determining the # of segments used to approximate rounded tags. Faktor koji određuje broj segmenata koji se koriste za približno zaobljene oznake. + + + Cannot insert holding tags for this path - please select a Profile path + Ne mogu umetnuti oznake držanja za ovu stazu - odaberite stazu profila + + + + The selected object is not a path + Odabrani objekt nije putanja staze + + + + Please select a Profile object + Odaberite objekt profila + + + + Holding Tag + Držeća traka + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Napravi držeće trake Dress-up + + + + Tag Dress-up + Držeća traka Dress-up + + + + Creates a Tag Dress-up object from a selected path + Stvara držeće trake objekt iz odabrane staze + + + + Please select one path object + Odaberite jedan objekt staze + + + + Create Tag Dress-up + Napravi držeće trake Dress-up + No Base object found. @@ -3399,21 +3438,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Base Path is empty. Osnovna Staza je prazna. - - - The selected object is not a path - Odabrani objekt nije putanja staze - - - - Please select a Profile object - Odaberite objekt profila - - - - Cannot insert holding tags for this path - please select a Profile path - Ne mogu umetnuti oznake držanja za ovu stazu - odaberite stazu profila - Path_DressupZCorrect @@ -3534,6 +3558,31 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Path_Job + + + Job + Zadatak + + + + Creates a Path Job object + Stvori objekt PathJob (zadatak staze) + + + + Export Template + Izvezi predložak + + + + Exports Path Job as a template to be used for other jobs + Izvezi zadatak staze kao predložak koji se može koristi za druge zadatke + + + + Create Job + Stvori zadatak + Edit Job @@ -3559,31 +3608,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Model Selection Model Selection - - - Create Job - Stvori zadatak - - - - Job - Zadatak - - - - Creates a Path Job object - Stvori objekt PathJob (zadatak staze) - - - - Export Template - Izvezi predložak - - - - Exports Path Job as a template to be used for other jobs - Izvezi zadatak staze kao predložak koji se može koristi za druge zadatke - Path_OpActiveToggle @@ -3643,9 +3667,9 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Path_Probe - - Select Output File - Odaberite datoteku izvoza + + Select Probe Point File + Select Probe Point File @@ -3653,9 +3677,9 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Sve datoteke (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Odaberite datoteku izvoza @@ -3728,7 +3752,9 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Closed loop detection failed. - Closed loop detection failed. + Otkrivanje zatvorene petlje nije uspjelo. + + @@ -3839,7 +3865,7 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Slot - Slot + Utor diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm index 44251006a1..9a42e705c6 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 4d7fd92964..4afc7a3f5f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Feltételes, vagy programozott állj hozzáadása - - - - The base object this collision refers to - Az alap objektum mely erre az ütközésre hivatkozik - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Szabályozza az eszköz mozgását a sarkoknál. Alapértelmezett=Kerekített - - - - Maximum distance before a miter join is truncated - Maximális távolság, mielőtt a ferde illesztés csonkul - - - - The base geometry of this toolpath - Ennek a szerszámmozgásnak az alapgeometriája - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra érték ami távol tart a záró profiltól- jó a nagyoló szerszámmozgáshoz - - - - Profile holes as well as the outline - Felület furatokat, valamint a körvonalat - - - - Profile the outline - Körvonalakat felületté - - - - Profile round holes - Kerek lyukak profilmarója - - - - Side of edge that tool should cut - Szerszámsugár-korrekció, az él eszközzel vágni kívánt oldala - - - - Make True, if using Cutter Radius Compensation - Állítsa igazra, ha sugár vágó kompenzációt alkalmaz - - - - Reverse direction of pocket operation. - A zseb művelet fordított iránya. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Megfordítja a szöget. Példa:-22,5-> 22,5 fok. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Ezzel a visszahúzási távolsággal elérni kívánt objektum - - - - The Z height of the hop - Visszahúzási sík magassága - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Állítsa igazra, ha egy kiinduló pontot ad meg - - - - Incremental Drill depth before retracting to clear chips - Fogásmélység Q értéke forgács eltávolításhoz - - - - Enable pecking - Vagdosás engedélyezése - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Pihentetés engedélyezése - - - - Calculate the tip length and subtract from final depth - Kiszámítja a csúcs hosszát, és levonja a végső mélységből - - - - Controls how tool retracts Default=G98 - Szabályozza, hogyan húzza vissza az eszközt Alapértelmezett=G98 - - - - The height where feed starts and height during retract tool when path is finished - Megközelítési pont, R pont - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Koordináta rendszer kiválasztása - - - - Make False, to prevent operation from generating code - Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra eltolása a művelethez. Iránya a függ a művelettől. - - - - Start pocketing at center or boundary - Zseb létrehozása a határvonal közepénél - - - - Percent of cutter diameter to step over on each pass - Maró átmérő százaléka mellyel átlép minden elhaladáskor - - - - Angle of the zigzag pattern - Cikk-cakk minta szöge - - - - Clearing pattern to use - Felhasznált tisztázó minta - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Munkasík kiválasztása a CNC programhoz - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Állítsa igazra, ha egy kiinduló pontot ad meg + The path to be copied A másolni kívánt szerszámpálya útvonal + + + The base geometry of this toolpath + Ennek a szerszámmozgásnak az alapgeometriája + The tool controller that will be used to calculate the path Útvonal kiszámításához használt eszköz vezérlő - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Sarok műveletek alatti emelési magasság - - Ramping Method - Futtatási módszer + + The object to be reached by this hop + Ezzel a visszahúzási távolsággal elérni kívánt objektum - - Which feed rate to use for ramping - Futtatáshoz használt adagolási ráta + + The Z height of the hop + Visszahúzási sík magassága - - Custom feedrate - Egyéni előtolás + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - BeállIndulásiMélység előtt a felépítő megállíthatja a mozgási parancsot + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - A mélység, ahol a rámpa felépítés engedélyezve van. E felett a rámpák nem lesznek létrehozva, de mozgás parancsok áthaladnak. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Mintázó mód - - - - Shape to use for calculating Boundary - Határ számításához használandó alakzat - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Koordináta rendszer kiválasztása + + + + Make False, to prevent operation from generating code + Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson + + + + Ramping Method + Futtatási módszer + + + + Which feed rate to use for ramping + Futtatáshoz használt adagolási ráta + + + + Custom feedrate + Egyéni előtolás + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + BeállIndulásiMélység előtt a felépítő megállíthatja a mozgási parancsot + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + A mélység, ahol a rámpa felépítés engedélyezve van. E felett a rámpák nem lesznek létrehozva, de mozgás parancsok áthaladnak. + + + + Incremental Drill depth before retracting to clear chips + Fogásmélység Q értéke forgács eltávolításhoz + + + + Enable pecking + Vagdosás engedélyezése + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Pihentetés engedélyezése + + + + Calculate the tip length and subtract from final depth + Kiszámítja a csúcs hosszát, és levonja a végső mélységből + + + + Controls how tool retracts Default=G98 + Szabályozza, hogyan húzza vissza az eszközt Alapértelmezett=G98 + + + + The height where feed starts and height during retract tool when path is finished + Megközelítési pont, R pont + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + A zseb művelet fordított iránya. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Megfordítja a szöget. Példa:-22,5-> 22,5 fok. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Munkasík kiválasztása a CNC programhoz + + + + Shape to use for calculating Boundary + Határ számításához használandó alakzat + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Az alap objektum mely erre az ütközésre hivatkozik + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra eltolása a művelethez. Iránya a függ a művelettől. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Zseb létrehozása a határvonal közepénél - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Maró átmérő százaléka mellyel átlép minden elhaladáskor - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Cikk-cakk minta szöge + + + + Clearing pattern to use + Felhasznált tisztázó minta + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Feltételes, vagy programozott állj hozzáadása + + + + Pattern method + Mintázó mód + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Szabályozza az eszköz mozgását a sarkoknál. Alapértelmezett=Kerekített + + + + Maximum distance before a miter join is truncated + Maximális távolság, mielőtt a ferde illesztés csonkul + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra érték ami távol tart a záró profiltól- jó a nagyoló szerszámmozgáshoz + + + + Profile holes as well as the outline + Felület furatokat, valamint a körvonalat + + + + Profile the outline + Körvonalakat felületté + + + + Profile round holes + Kerek lyukak profilmarója + + + + Side of edge that tool should cut + Szerszámsugár-korrekció, az él eszközzel vágni kívánt oldala + + + + Make True, if using Cutter Radius Compensation + Állítsa igazra, ha sugár vágó kompenzációt alkalmaz @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Gravírozási műveletek - - - - 3D Operations - 3D műveletek - - - - Project Setup - Projekt telepítő beállító - - - - Tool Commands - Eszköz parancsok - - - - New Operations - Új művelet - - - - Path Modification - Szerszámpálya módosítása - - - - Helpful Tools - Hasznos eszközök - - - - &Path - Szerszámpálya - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Nem hozható létre a felület(ek) útvonala. - - - - Face appears misaligned after initial rotation. - Az felületet a kezdeti forgatás után rosszul igazítja a program. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. - - - - Multiple faces in Base Geometry. - Többszörös felületek az alap geometriában. - - - - Depth settings will be applied to all faces. - A mélységbeállítás mindegyik felületre érvényes lesz. - - - - EnableRotation property is 'Off'. - Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br> Zseb az kihúzott felület alapján. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br> A zseb alja lehet nem síkbeli és/vagy nem az orsótengelyhez aktualizált. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br> <i> 3D zseb alja nem elérhető ebben a műveletben </i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Fontolja meg a InverseAngle tulajdonság átváltását, és a művelet újraszámítását. - - - - Processing subs individually ... - Az alárendeltek egyenként történő feldolgozása... - - - - Depth Warning - Mélységi figyelmeztetés - - - - Verify final depth of pocket shaped by vertical faces. - A függőleges felületek által formált zseb végső mélységének ellenőrzése. - - - - Processing model as a whole ... - Feldolgozó modell egésze... - - - - Can not identify loop. - Nem lehet azonosítani az ismétlést. - Edit Szerkesztés - - Heights - Magasságok + + %s is not a Base Model object of the job %s + %s nem egy alap modell objektuma ennek a feladatnak: %s - - AreaOp Operation - AreaOp művelet + + Base shape %s already in the list + %s alap alakzat már szerepel a listában - - Uncreate AreaOp Operation - Megsemmisített AreaOp művelet + + Ignoring vertex + Végpont figyelmen kívül hagyása - - Pick Start Point - Válasszon indulási pontot + + Didn't find job %s + Nem találja a %s feladatot + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Érvénytelen forgácsoló él szög %.2f, <90° és >=0° közti kell + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Forgácsoló él szög (%.2f) eredménye negatív szerszám csúcs hossz @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s nem egy alap modell objektuma ennek a feladatnak: %s + + Heights + Magasságok - - Base shape %s already in the list - %s alap alakzat már szerepel a listában + + AreaOp Operation + AreaOp művelet - - Ignoring vertex - Végpont figyelmen kívül hagyása + + Uncreate AreaOp Operation + Megsemmisített AreaOp művelet + + + + Pick Start Point + Válasszon indulási pontot + + + + +<br>Pocket is based on extruded surface. + +<br> Zseb az kihúzott felület alapján. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br> A zseb alja lehet nem síkbeli és/vagy nem az orsótengelyhez aktualizált. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br> <i> 3D zseb alja nem elérhető ebben a műveletben </i>. + + + + Face appears misaligned after initial rotation. + Az felületet a kezdeti forgatás után rosszul igazítja a program. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. + + + + Multiple faces in Base Geometry. + Többszörös felületek az alap geometriában. + + + + Depth settings will be applied to all faces. + A mélységbeállítás mindegyik felületre érvényes lesz. + + + + EnableRotation property is 'Off'. + Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Fontolja meg a InverseAngle tulajdonság átváltását, és a művelet újraszámítását. + + + + Processing subs individually ... + Az alárendeltek egyenként történő feldolgozása... + + + + Depth Warning + Mélységi figyelmeztetés + + + + Verify final depth of pocket shaped by vertical faces. + A függőleges felületek által formált zseb végső mélységének ellenőrzése. + + + + Processing model as a whole ... + Feldolgozó modell egésze... + + + + Can not identify loop. + Nem lehet azonosítani az ismétlést. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Nem hozható létre a felület(ek) útvonala. - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Gravírozási műveletek - - Didn't find job %s - Nem találja a %s feladatot + + 3D Operations + 3D műveletek - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Érvénytelen forgácsoló él szög %.2f, <90° és >=0° közti kell + + Project Setup + Projekt telepítő beállító - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Eszköz parancsok - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie + + New Operations + Új művelet - - Cutting Edge Angle (%.2f) results in negative tool tip length - Forgácsoló él szög (%.2f) eredménye negatív szerszám csúcs hossz + + Path Modification + Szerszámpálya módosítása + + + + Helpful Tools + Hasznos eszközök + + + + &Path + Szerszámpálya + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Kiegészítő alap tárgyakat kell bevésni - - - - The vertex index to start the path from - Az útvonal indulási pontjától a végpont index - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Létrehoz egy begravírozó útvonalat egy Szövegalakzat körül + + + Additional base objects to be engraved + Kiegészítő alap tárgyakat kell bevésni + + + + The vertex index to start the path from + Az útvonal indulási pontjától a végpont index + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s még nincs tulajdonsága %s (%s)) - Cannot find property %s of %s Nem található %s tulajdonsága ennek: %s + + + %s has no property %s (%s)) + %s még nincs tulajdonsága %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Csigavonal + + + + Creates a Path Helix object from a features of a base object + Spirál útvonalat hoz létre az alap objektum egy jellegzetességéből + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Csigavonal - - - - Creates a Path Helix object from a features of a base object - Spirál útvonalat hoz létre az alap objektum egy jellegzetességéből - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Nem támogatott alaptest tárgy %s + + + + Unsupported stock type %s (%d) + Nem támogatott alaptest típus %s (%d) + + + + Stock not from Base bound box! + Alaptest nem az alapértelmezetthez kötött listából! + + + + Stock not a box! + Alaptest nem egy téglatest! + + + + Stock not a cylinder! + Alaptest nem egy henger! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Nem támogatott munka-útvonal sablon változat %s - - - Unsupported stock object %s - Nem támogatott alaptest tárgy %s - - - - Unsupported stock type %s (%d) - Nem támogatott alaptest típus %s (%d) - - - - Stock not from Base bound box! - Alaptest nem az alapértelmezetthez kötött listából! - - - - Stock not a box! - Alaptest nem egy téglatest! - - - - Stock not a cylinder! - Alaptest nem egy henger! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Alap geometria - - - - Base Location - Alap helyzet - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Végleges-Mélység nem módosítható ehhez a művelethez. -Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy másik műveletet. - - - - Depths - Mélység - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy User Assigned Label Felhasználó által hozzárendelt címke + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Coolant option for this operation Coolant option for this operation + + + Base Geometry + Alap geometria + + + + Base Location + Alap helyzet + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Végleges-Mélység nem módosítható ehhez a művelethez. +Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy másik műveletet. + + + + Depths + Mélység + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D zseb - - Pass Extension - Áthalad a meghosszabbításon - - - - The distance the facing operation will extend beyond the boundary shape. - A távolság a szemben állók műveletére túlnyúlik az alakzat határán. + + Creates a Path 3D Pocket object from a face or faces + Létrehoz egy szerszámpálya 3D zseb útvonal objektumot egy felületből vagy felületekből @@ -1858,14 +1853,29 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Függőleges felületek nem alkotnak egy ismétlést - figyelmen kívül hagyva - - 3D Pocket - 3D zseb + + Adaptive clearing and profiling + Alkalmazkodó tisztázás és profilírozás (profilkialakítás) - - Creates a Path 3D Pocket object from a face or faces - Létrehoz egy szerszámpálya 3D zseb útvonal objektumot egy felületből vagy felületekből + + Pass Extension + Áthalad a meghosszabbításon + + + + The distance the facing operation will extend beyond the boundary shape. + A távolság a szemben állók műveletére túlnyúlik az alakzat határán. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Pocket object from a face or faces Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből - - - Adaptive clearing and profiling - Alkalmazkodó tisztázás és profilírozás (profilkialakítás) - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathProfile + + + Profile based on face or faces + Felületen vagy felületeken alapuló profil + Profile @@ -2020,11 +2025,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Felületen vagy felületeken alapuló profil - Edge Profile @@ -2435,26 +2435,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathToolController + + + Error updating TC: %s + Frissítési hiba TC: %s + The active tool @@ -2840,11 +2845,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy The tool used by this controller Ehhez a vezérlőhöz használt eszköz - - - Error updating TC: %s - Frissítési hiba TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_DressupPathBoundary - - - The base path to modify - A megváltoztatni kívánt alap pálya útvonal - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - A kijelölt objektum nem pálya útvonal - Create a Boundary dressup @@ -3273,6 +3253,26 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + A megváltoztatni kívánt alap pálya útvonal + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + A kijelölt objektum nem pálya útvonal + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Hozzon létre egy Címke megváltoztatást - - - - Tag Dress-up - Címke megváltoztatás - - - - Creates a Tag Dress-up object from a selected path - Címke módosító objektumot hoz létre a kiválasztott útvonalból - - - - Please select one path object - Kérem jelöljön ki egy pálya objektumot - - - - Create Tag Dress-up - Címke megváltoztatás létrehozás - - - - Holding Tag - Tartó címke - The base path to modify @@ -3374,6 +3339,56 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Factor determining the # of segments used to approximate rounded tags. A kerekített címkék közelítésére használt szegmensek #számát meghatározó tényező. + + + Cannot insert holding tags for this path - please select a Profile path + Nem lehet beszúrni ezt a tartó címkét ehhez az útvonalhoz - kérjük, válassza ki a profil elérési útját + + + + The selected object is not a path + A kijelölt objektum nem pálya útvonal + + + + Please select a Profile object + Kérem válasszon egy profil objektumot + + + + Holding Tag + Tartó címke + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Hozzon létre egy Címke megváltoztatást + + + + Tag Dress-up + Címke megváltoztatás + + + + Creates a Tag Dress-up object from a selected path + Címke módosító objektumot hoz létre a kiválasztott útvonalból + + + + Please select one path object + Kérem jelöljön ki egy pálya objektumot + + + + Create Tag Dress-up + Címke megváltoztatás létrehozás + No Base object found. @@ -3394,21 +3409,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Base Path is empty. Alap útvonal üres. - - - The selected object is not a path - A kijelölt objektum nem pálya útvonal - - - - Please select a Profile object - Kérem válasszon egy profil objektumot - - - - Cannot insert holding tags for this path - please select a Profile path - Nem lehet beszúrni ezt a tartó címkét ehhez az útvonalhoz - kérjük, válassza ki a profil elérési útját - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Job + + + Job + Feladat + + + + Creates a Path Job object + Létrehoz egy útvonal feladatobjektumot + + + + Export Template + Sablon exportálás + + + + Exports Path Job as a template to be used for other jobs + Munka-útvonal exportja sablonként, felhasználható más munkákhoz + + + + Create Job + Feladat létrehozás + Edit Job @@ -3554,31 +3579,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Model Selection Model Selection - - - Create Job - Feladat létrehozás - - - - Job - Feladat - - - - Creates a Path Job object - Létrehoz egy útvonal feladatobjektumot - - - - Export Template - Sablon exportálás - - - - Exports Path Job as a template to be used for other jobs - Munka-útvonal exportja sablonként, felhasználható más munkákhoz - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Probe - - Select Output File - Válassza ki a kimeneti fájlt + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Összes fájl (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Válassza ki a kimeneti fájlt diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.qm b/src/Mod/Path/Gui/Resources/translations/Path_id.qm index 7acb6b6869..951657f99f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_id.qm and b/src/Mod/Path/Gui/Resources/translations/Path_id.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index a51b84389f..818faf22e2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Tambahkan Opsional atau Wajib Berhenti ke program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Kontrol bagaimana alat bergerak di sekitar sudut. Default=Putaran - - - - Maximum distance before a miter join is truncated - Jarak maksimal sebelum penggabung bergabung dipotong - - - - The base geometry of this toolpath - Geometri dasar dari toolpath ini - - - - Extra value to stay away from final profile- good for roughing toolpath - Nilai ekstra untuk menjauh dari profil akhir - bagus untuk perkakas kasar - - - - Profile holes as well as the outline - Lubang profil serta garis besar - - - - Profile the outline - Profil garis besar - - - - Profile round holes - Profil lubang bundar - - - - Side of edge that tool should cut - Sisi tepi yang alat harus memotong - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The objek yang akan dicapai dengan ini hop - - - - The Z height of the hop - Tinggi Z dari hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Buat Benar, jika menentukan Titik Awal - - - - Incremental Drill depth before retracting to clear chips - Kedalaman drill inkremental sebelum menarik ke clear chips - - - - Enable pecking - Aktifkan pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - Tinggi tempat pakan mulai dan tinggi saat alat ditarik saat jalan selesai - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Nomor Offset Fixture - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. - - - - Start pocketing at center or boundary - Mulai mengantongi di tengah atau batas - - - - Percent of cutter diameter to step over on each pass - Persentase diameter pemotong untuk mengimbangi setiap lintasan - - - - Angle of the zigzag pattern - Sudut dari pola zigzag - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientasi pesawat dari CNC jalan - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Buat Benar, jika menentukan Titik Awal + The path to be copied The path yang akan disalin + + + The base geometry of this toolpath + Geometri dasar dari toolpath ini + The tool controller that will be used to calculate the path Pengontrol alat yang akan digunakan untuk menghitung lintasan - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Tinggi untuk menaikkan saat aksi pojok - - Ramping Method - Metode Ramping + + The object to be reached by this hop + The objek yang akan dicapai dengan ini hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + Tinggi Z dari hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Metode pola - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Nomor Offset Fixture + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Metode Ramping + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Kedalaman drill inkremental sebelum menarik ke clear chips + + + + Enable pecking + Aktifkan pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Tinggi tempat pakan mulai dan tinggi saat alat ditarik saat jalan selesai + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientasi pesawat dari CNC jalan + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Mulai mengantongi di tengah atau batas - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Persentase diameter pemotong untuk mengimbangi setiap lintasan - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Sudut dari pola zigzag + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Tambahkan Opsional atau Wajib Berhenti ke program + + + + Pattern method + Metode pola + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Kontrol bagaimana alat bergerak di sekitar sudut. Default=Putaran + + + + Maximum distance before a miter join is truncated + Jarak maksimal sebelum penggabung bergabung dipotong + + + + Extra value to stay away from final profile- good for roughing toolpath + Nilai ekstra untuk menjauh dari profil akhir - bagus untuk perkakas kasar + + + + Profile holes as well as the outline + Lubang profil serta garis besar + + + + Profile the outline + Profil garis besar + + + + Profile round holes + Profil lubang bundar + + + + Side of edge that tool should cut + Sisi tepi yang alat harus memotong + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Setup Proyek - - - - Tool Commands - Perintah Alat - - - - New Operations - Operasi Baru - - - - Path Modification - Path Modification - - - - Helpful Tools - Alat Bermanfaat - - - - &Path - & Jalur - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Edit - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Operasi AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Operasi Tanpa Sampah + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pilih Start Point + + Didn't find job %s + Tidak menemukan pekerjaan%s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Sudut Cutting Edge tidak benar%.2f, harus <90° dan>=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) menghasilkan ujung alat negatif @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Operasi AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Operasi Tanpa Sampah + + + + Pick Start Point + Pilih Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Tidak menemukan pekerjaan%s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Sudut Cutting Edge tidak benar%.2f, harus <90° dan>=0° + + Project Setup + Setup Proyek - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Perintah Alat - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Operasi Baru - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) menghasilkan ujung alat negatif + + Path Modification + Path Modification + + + + Helpful Tools + Alat Bermanfaat + + + + &Path + & Jalur + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1386,16 +1386,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1406,6 +1396,16 @@ Creates an Engraving Path around a Draft ShapeString Membuat alur Engraving seputar Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1462,16 +1462,16 @@ PathGui - - - %s has no property %s (%s)) - % s tidak memiliki properti % s ( % s )) - Cannot find property %s of %s Tidak dapat menemukan properti % s dari % s + + + %s has no property %s (%s)) + % s tidak memiliki properti % s ( % s )) + Tool Error @@ -1490,6 +1490,16 @@ PathHelix + + + Helix + Spiral + + + + Creates a Path Helix object from a features of a base object + Membuat objek Path Helix dari fitur objek dasar + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1510,16 +1520,6 @@ Starting Radius Starting Radius - - - Helix - Spiral - - - - Creates a Path Helix object from a features of a base object - Membuat objek Path Helix dari fitur objek dasar - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1528,6 +1528,31 @@ PathJob + + + Unsupported stock object %s + Objek stok tidak didukung % s + + + + Unsupported stock type %s (%d) + Tidak didukung saham jenis % s ( % d ) + + + + Stock not from Base bound box! + Stok bukan dari kotak Base bound! + + + + Stock not a box! + Stok bukan kotak! + + + + Stock not a cylinder! + Stok bukan silinder! + The NC output file for this project @@ -1598,31 +1623,6 @@ Unsupported PathJob template version %s Versi template PathJob yang tidak didukung % s - - - Unsupported stock object %s - Objek stok tidak didukung % s - - - - Unsupported stock type %s (%d) - Tidak didukung saham jenis % s ( % d ) - - - - Stock not from Base bound box! - Stok bukan dari kotak Base bound! - - - - Stock not a box! - Stok bukan kotak! - - - - Stock not a cylinder! - Stok bukan silinder! - Solids @@ -1666,43 +1666,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Lokasi dasar - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Kedalaman - - - - Operation - Operation - The base geometry for this operation @@ -1748,6 +1711,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Label yang Ditugaskan Pengguna + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1813,6 +1781,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Lokasi dasar + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Kedalaman + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1825,19 +1825,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - Jarak yang dihadapinya akan melampaui bentuk batas. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1855,14 +1850,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + Jarak yang dihadapinya akan melampaui bentuk batas. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1889,16 +1899,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1947,6 +1947,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2017,11 +2022,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2432,26 +2432,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2557,6 +2537,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2670,56 +2670,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2760,6 +2710,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2786,6 +2786,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Kesalahan saat memperbarui TC: % s + The active tool @@ -2836,11 +2841,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Alat yang digunakan oleh pengontrol ini - - - Error updating TC: %s - Kesalahan saat memperbarui TC: % s - PathToolLibraryManager @@ -3222,26 +3222,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Basis path untuk memodifikasi - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3267,6 +3247,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Basis path untuk memodifikasi + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3293,41 +3293,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Buat dressup Tag - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Membuat objek Tag Dress-up dari jalur yang dipilih - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Buat Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3368,6 +3333,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Silahkan pilih objek Profile + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Buat dressup Tag + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Membuat objek Tag Dress-up dari jalur yang dipilih + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Buat Tag Dress-up + No Base object found. @@ -3388,21 +3403,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Jalur dasar kosong. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Silahkan pilih objek Profile - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3522,6 +3522,32 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Pekerjaan + + + + Creates a Path Job object + Membuat Jalur Pekerjaan objek + + + + + Export Template + Template Ekspor + + + + Exports Path Job as a template to be used for other jobs + Jalur Ekspor Pekerjaan sebagai template yang akan digunakan untuk pekerjaan lain + + + + Create Job + Buat pekerjaan + Edit Job @@ -3547,32 +3573,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Buat pekerjaan - - - - Job - Pekerjaan - - - - Creates a Path Job object - Membuat Jalur Pekerjaan objek - - - - - Export Template - Template Ekspor - - - - Exports Path Job as a template to be used for other jobs - Jalur Ekspor Pekerjaan sebagai template yang akan digunakan untuk pekerjaan lain - Path_OpActiveToggle @@ -3632,9 +3632,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Pilih File Output + + Select Probe Point File + Select Probe Point File @@ -3642,9 +3642,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Pilih File Output diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.qm b/src/Mod/Path/Gui/Resources/translations/Path_it.qm index 49672cbce9..cdbf020ef1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_it.qm and b/src/Mod/Path/Gui/Resources/translations/Path_it.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 59eebe6a9c..656b8de01a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Aggiunge una sosta obbligatoria o facoltativa al programma - - - - The base object this collision refers to - L'oggetto base a cui si riferisce questo conflitto - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - La direzione del percorso utensile intorno alla parte, CW se in senso orario o CCW se in senso antiorario - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Imposta la percentuale di passo, in base al diametro dello strumento. - - - - Controls how tool moves around corners. Default=Round - Controlla come si muove lo strumento attorno agli angoli (Standard = Rotondo) - - - - Maximum distance before a miter join is truncated - Distanza massima prima che il giunto di mitra (45°) sia troncato - - - - The base geometry of this toolpath - La geometria di base del percorso di questo utensile - - - - Extra value to stay away from final profile- good for roughing toolpath - Un valore aggiuntivo per mantenersi a distanza di sicurezza dal profilo finale - utile per il percorso di un utensile di sgrossatura - - - - Profile holes as well as the outline - Disegna fori con contorno - - - - Profile the outline - Profila il contorno - - - - Profile round holes - Profila i fori rotondi - - - - Side of edge that tool should cut - Lato del bordo che l'utensile deve tagliare - - - - Make True, if using Cutter Radius Compensation - Rendere vero (True), se si utilizza la compensazione raggio utensile - - - - Reverse direction of pocket operation. - Inverte la direzione dell'operazione tasca. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverte l'angolo. Esempio: -22.5 -> 22.5 gradi. - - - - Attempt the inverse angle for face access if original rotation fails. - Tentare l'angolo inverso per l'accesso alla faccia se la rotazione originale non riesce. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Forza la profondità Z della faccia selezionata come valore più basso per la profondità finale. Saranno considerati i valori utente più alti. - - - - The object to be reached by this hop - L'oggetto da raggiungere con questo salto - - - - The Z height of the hop - L'altezza Z del salto - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Abilita la rotazione per accedere a tasche o aree non normali all'asse Z. - Show the temporary path construction objects when module is in DEBUG mode. Mostra gli oggetti di costruzione dei percorsi temporanei quando il modulo è in modalità DEBUG. - - - Enter custom start point for slot path. - Inserire un punto di partenza personalizzato per il percorso di scanalatura. - - - - Enter custom end point for slot path. - Inserire un punto finale personalizzato per il percorso di scanalatura. - - - - Set the geometric clearing pattern to use for the operation. - Imposta il modello di pulizia geometrica da utilizzare per l'operazione. - - - - Positive extends the beginning of the path, negative shortens. - Positivo estende l'inizio del percorso, negativo lo accorcia. - - - - Positive extends the end of the path, negative shortens. - Positivo estende la fine del percorso, negativo lo accorcia. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Completa l'operazione con un singolo passaggio in profondità o con più passaggi fino alla profondità finale. - - - - Choose the path orientation with regard to the feature(s) selected. - Scegliere l'orientamento del percorso per quanto riguarda le funzioni selezionate. - - - - Choose what point to use on the first selected feature. - Scegliere quale punto usare per la prima funzione selezionata. - - - - Choose what point to use on the second selected feature. - Scegliere quale punto usare per la seconda funzione selezionata. - - - - For arcs/circlular edges, offset the radius for the path. - Per gli archi o bordi circolari, spostare il raggio per il percorso. - - - - Enable to reverse the cut direction of the slot path. - Abilitare per invertire la direzione di taglio del percorso di scanalatura. - - - - The custom start point for the path of this operation - Il punto di partenza personalizzato per il percorso di questa operazione - - - - Make True, if specifying a Start Point - Rendere True, se specifica un punto iniziale - - - - Incremental Drill depth before retracting to clear chips - Incremento della profondità di foratura prima del ritorno per scaricare i trucioli - - - - Enable pecking - Abilita pecking - - - - The time to dwell between peck cycles - Durata della pausa tra due passate - - - - Enable dwell - Attiva la pausa - - - - Calculate the tip length and subtract from final depth - Calcola la lunghezza della punta e la sottrae dalla profondità finale - - - - Controls how tool retracts Default=G98 - Controlla la ritrazione dell'utensile Codice standard = G98 - - - - The height where feed starts and height during retract tool when path is finished - L'altezza a cui inizia l'avanzamento e l'altezza durante l'allontanamento dell'utensile a fine percorso - - - - Controls how tool retracts Default=G99 - Controlla il modo in cui lo strumento si ritrae. Default = G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - L'altezza a cui inizia l'avanzamento e l'altezza di allontanamento dell'utensile a fine percorso di un'operazione di foratura - - - - How far the drill depth is extended - Fino a che punto la profondità del trapano è estesa - - - - Fixture Offset Number - Scostamento del punto di fissaggio - - - - Make False, to prevent operation from generating code - Rendere False, per escludere l'operazione dalla generazione del codice - - - - Extra offset to apply to the operation. Direction is operation dependent. - Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. - - - - Start pocketing at center or boundary - Inizia la lavorazione della cava dal centro oppure dal bordo - - - - Percent of cutter diameter to step over on each pass - Percentuale del diametro dell'utensile da sovrapporre alla passata precedente - - - - Angle of the zigzag pattern - Angolo di zigzag - - - - Clearing pattern to use - Modello di pulizia da usare - - - - Use 3D Sorting of Path - Usa l'ordinamento 3D del percorso - - - - Attempts to avoid unnecessary retractions. - Tenta di evitare retrazioni inutili. - - - - Orientation plane of CNC path - Orientamento del piano di lavoro del percorso CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Imposta la direzione dello strumento di taglio per la lavorazione del materiale: Scalare (senso orario) o Convenzionale (senso antiorario) + + + Set the geometric clearing pattern to use for the operation. + Imposta il modello di pulizia geometrica da utilizzare per l'operazione. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Imposta l'offset della profondità dell'asse Z dalla superficie di destinazione. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Completa l'operazione con un singolo passaggio in profondità o con più passaggi fino alla profondità finale. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Imposta la risoluzione campione. Valori più piccoli aumentano il tempo di elaborazione. + + + Set the stepover percentage, based on the tool's diameter. + Imposta la percentuale di passo, in base al diametro dello strumento. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: tre piccoli vuoti identificati nella geometria del percorso. + + + The custom start point for the path of this operation + Il punto di partenza personalizzato per il percorso di questa operazione + + + + Make True, if specifying a Start Point + Rendere True, se specifica un punto iniziale + The path to be copied Il percorso da copiare + + + The base geometry of this toolpath + La geometria di base del percorso di questo utensile + The tool controller that will be used to calculate the path Il controllore di strumento da usare per calcolare il percorso - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - I valori più piccoli producono una maglia più fine e precisa. I valori più piccoli aumentano molto tempo di elaborazione. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - I valori più piccoli producono una maglia più fine e precisa. I valori più piccoli non aumentano di molto tempo di elaborazione. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Selezionare l'algoritmo da utilizzare: OCL Dropcutter*, o Sperimentale (non basato su OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Impostare per cancellare l'ultimo livello in un'operazione `Multi-pass`. - - - - Ignore outer waterlines above this height. - Ignorare le waterline esterne al di sopra di questa altezza. - The base path to modify @@ -534,54 +269,39 @@ Altezza di sollevamento durante l'azione di angolo - - Ramping Method - Metodo di rampa + + The object to be reached by this hop + L'oggetto da raggiungere con questo salto - - Which feed rate to use for ramping - Velocità di avanzamento da utilizzare per l'ingresso + + The Z height of the hop + L'altezza Z del salto - - Custom feedrate - Velocità di avanzamento personalizzata + + X offset between tool and probe + Scostamento X tra utensile e sonda - - Custom feed rate - Velocità di avanzamento personalizzata + + Y offset between tool and probe + Scostamento Y tra utensile e sonda - - Should the dressup ignore motion commands above DressupStartDepth - Se la mascheratura deve ignorare i comandi di movimento al di sopra di DressupStartDepth + + Number of points to probe in X direction + Numero di punti da sondare nella direzione X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - La profondità a cui è attivata la traiettoria aggiuntiva per la rampa. Al di sopra di essa le rampe non vengono generate, ma i comandi di movimento sono mantenuti così come sono. + + Number of points to probe in Y direction + Numero di punti da sondare nella direzione Y - - Pattern method - Metodo di generazione della serie - - - - Shape to use for calculating Boundary - Forma da utilizzare per calcolare il contorno - - - - Clear edges of surface (Only applicable to BoundBox) - Pulisci i bordi della superficie (applicabile solo a BoundBox) - - - - Exclude milling raised areas inside the face. - Escludere dalla fresatura le aree rialzate all'interno della faccia. + + The output location for the probe data to be written + La posizione di output per scrivere i dati della sonda @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Applica LeadInOut ai livelli all'interno di un'operazione + + + Fixture Offset Number + Scostamento del punto di fissaggio + + + + Make False, to prevent operation from generating code + Rendere False, per escludere l'operazione dalla generazione del codice + + + + Ramping Method + Metodo di rampa + + + + Which feed rate to use for ramping + Velocità di avanzamento da utilizzare per l'ingresso + + + + Custom feedrate + Velocità di avanzamento personalizzata + + + + Custom feed rate + Velocità di avanzamento personalizzata + + + + Should the dressup ignore motion commands above DressupStartDepth + Se la mascheratura deve ignorare i comandi di movimento al di sopra di DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + La profondità a cui è attivata la traiettoria aggiuntiva per la rampa. Al di sopra di essa le rampe non vengono generate, ma i comandi di movimento sono mantenuti così come sono. + + + + Incremental Drill depth before retracting to clear chips + Incremento della profondità di foratura prima del ritorno per scaricare i trucioli + + + + Enable pecking + Abilita pecking + + + + The time to dwell between peck cycles + Durata della pausa tra due passate + + + + Enable dwell + Attiva la pausa + + + + Calculate the tip length and subtract from final depth + Calcola la lunghezza della punta e la sottrae dalla profondità finale + + + + Controls how tool retracts Default=G98 + Controlla la ritrazione dell'utensile Codice standard = G98 + + + + The height where feed starts and height during retract tool when path is finished + L'altezza a cui inizia l'avanzamento e l'altezza durante l'allontanamento dell'utensile a fine percorso + + + + Controls how tool retracts Default=G99 + Controlla il modo in cui lo strumento si ritrae. Default = G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + L'altezza a cui inizia l'avanzamento e l'altezza di allontanamento dell'utensile a fine percorso di un'operazione di foratura + + + + How far the drill depth is extended + Fino a che punto la profondità del trapano è estesa + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Abilita la rotazione per accedere a tasche o aree non normali all'asse Z. + + + + Reverse direction of pocket operation. + Inverte la direzione dell'operazione tasca. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverte l'angolo. Esempio: -22.5 -> 22.5 gradi. + + + + Attempt the inverse angle for face access if original rotation fails. + Tentare l'angolo inverso per l'accesso alla faccia se la rotazione originale non riesce. + + + + Orientation plane of CNC path + Orientamento del piano di lavoro del percorso CNC + + + + Shape to use for calculating Boundary + Forma da utilizzare per calcolare il contorno + + + + Clear edges of surface (Only applicable to BoundBox) + Pulisci i bordi della superficie (applicabile solo a BoundBox) + + + + Exclude milling raised areas inside the face. + Escludere dalla fresatura le aree rialzate all'interno della faccia. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + I valori più piccoli producono una maglia più fine e precisa. I valori più piccoli aumentano molto tempo di elaborazione. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + I valori più piccoli producono una maglia più fine e precisa. I valori più piccoli non aumentano di molto tempo di elaborazione. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Selezionare l'algoritmo da utilizzare: OCL Dropcutter*, o Sperimentale (non basato su OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Impostare per cancellare l'ultimo livello in un'operazione `Multi-pass`. + + + + Ignore outer waterlines above this height. + Ignorare le waterline esterne al di sopra di questa altezza. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Forza la profondità Z della faccia selezionata come valore più basso per la profondità finale. Saranno considerati i valori utente più alti. + + + + The base object this collision refers to + L'oggetto base a cui si riferisce questa collisione + + + + Enter custom start point for slot path. + Inserire un punto di partenza personalizzato per il percorso di scanalatura. + + + + Enter custom end point for slot path. + Inserire un punto finale personalizzato per il percorso di scanalatura. + + + + Positive extends the beginning of the path, negative shortens. + Positivo estende l'inizio del percorso, negativo lo accorcia. + + + + Positive extends the end of the path, negative shortens. + Positivo estende la fine del percorso, negativo lo accorcia. + + + + Choose the path orientation with regard to the feature(s) selected. + Scegliere l'orientamento del percorso per quanto riguarda le funzioni selezionate. + + + + Choose what point to use on the first selected feature. + Scegliere quale punto usare per la prima funzione selezionata. + + + + Choose what point to use on the second selected feature. + Scegliere quale punto usare per la seconda funzione selezionata. + + + + For arcs/circlular edges, offset the radius for the path. + Per gli archi o bordi circolari, spostare il raggio per il percorso. + + + + Enable to reverse the cut direction of the slot path. + Abilitare per invertire la direzione di taglio del percorso di scanalatura. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Elabora il modello e il grezzo in un'operazione senza la geometria di base selezionata. - - X offset between tool and probe - Scostamento X tra utensile e sonda + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + La direzione del percorso utensile intorno alla parte, CW se in senso orario o CCW se in senso antiorario - - Y offset between tool and probe - Scostamento Y tra utensile e sonda + + Extra offset to apply to the operation. Direction is operation dependent. + Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. - - Number of points to probe in X direction - Numero di punti da sondare nella direzione X + + Start pocketing at center or boundary + Inizia la lavorazione della cava dal centro oppure dal bordo - - Number of points to probe in Y direction - Numero di punti da sondare nella direzione Y + + Percent of cutter diameter to step over on each pass + Percentuale del diametro dell'utensile da sovrapporre alla passata precedente - - The output location for the probe data to be written - La posizione di output per scrivere i dati della sonda + + Angle of the zigzag pattern + Angolo di zigzag + + + + Clearing pattern to use + Modello di pulizia da usare + + + + Use 3D Sorting of Path + Usa l'ordinamento 3D del percorso + + + + Attempts to avoid unnecessary retractions. + Tenta di evitare retrazioni inutili. + + + + Add Optional or Mandatory Stop to the program + Aggiunge una sosta obbligatoria o facoltativa al programma + + + + Pattern method + Metodo di generazione della serie + + + + Extend the profile clearing beyond the Extra Offset. + Estendi la compensazione del profilo oltre l'Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controlla come si muove lo strumento attorno agli angoli (Standard = Rotondo) + + + + Maximum distance before a miter join is truncated + Distanza massima prima che il giunto di mitra (45°) sia troncato + + + + Extra value to stay away from final profile- good for roughing toolpath + Un valore aggiuntivo per mantenersi a distanza di sicurezza dal profilo finale - utile per il percorso di un utensile di sgrossatura + + + + Profile holes as well as the outline + Disegna fori con contorno + + + + Profile the outline + Profila il contorno + + + + Profile round holes + Profila i fori rotondi + + + + Side of edge that tool should cut + Lato del bordo che l'utensile deve tagliare + + + + Make True, if using Cutter Radius Compensation + Rendere vero (True), se si utilizza la compensazione raggio utensile @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operazioni di incisione - - - - 3D Operations - Operazioni 3D - - - - Project Setup - Imposta Progetto - - - - Tool Commands - Comandi dell'utensile - - - - New Operations - Nuove operazioni - - - - Path Modification - Modifica Percorso - - - - Helpful Tools - Strumenti utili - - - - &Path - &Percorso - - - - Path Dressup - Ottimizzazione del percorso - - - - Supplemental Commands - Comandi supplementari - - - - Unable to create path for face(s). - Impossibile creare il percorso per la faccia(e). - - - - Face appears misaligned after initial rotation. - La faccia appare disallineata dopo la rotazione iniziale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. - - - - Multiple faces in Base Geometry. - Più facce nella Geometria di base. - - - - Depth settings will be applied to all faces. - Le impostazioni di Profondità saranno applicate a tutte le facce. - - - - EnableRotation property is 'Off'. - La proprietà EnableRotation è 'Off'. - - - - Rotated to inverse angle. - Ruota all'angolo inverso. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Le funzioni selezionate richiedono 'Abilita rotazione: A(x)' per l'accesso. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Le funzioni selezionate richiedono 'Abilita rotazione: B(y)' per l'accesso. - - - - -<br>Pocket is based on extruded surface. - -<br>Tasca è basata su una superficie estrusa. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>La parte inferiore della tasca potrebbe non essere planare e/o non normale all'asse del mandrino. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>Il fondo della tasca 3D NON è disponibile per questa operazione</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Considerare di attivare la proprietà InverseAngle e di ricalcolare l'operazione. - - - - Processing subs individually ... - Elaborando individualmente i subs... - - - - Depth Warning - Avviso di Profondità - - - - Verify final depth of pocket shaped by vertical faces. - Verifica la profondità finale della tasca formata da facce verticali. - - - - Processing model as a whole ... - Elaborazione del modello nel suo complesso... - - - - Can not identify loop. - Impossibile identificare il ciclo. - Edit Modifica - - Heights - Altezze + + %s is not a Base Model object of the job %s + %s non è un oggetto del Modello Base della lavorazione %s - - AreaOp Operation - Operazione AreaOp + + Base shape %s already in the list + Forma base %s già nell'elenco - - Uncreate AreaOp Operation - Elimina l'operazione AreaOp + + Ignoring vertex + Ignora il vertice - - Pick Start Point - Scegli il punto iniziale + + Didn't find job %s + Non riesco a trovare la lavorazione %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Angolo di taglio di %.2f invalido, deve essere compreso fra <90° e >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio non valido %.2f, deve essere compreso tra >0° e <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angolo di taglio (%.2f) risulta negativo nella lunghezza della punta dello strumento @@ -1133,19 +1005,127 @@ L'oggetto di base %s.%s è rifiutato dall'operazione - - %s is not a Base Model object of the job %s - %s non è un oggetto del Modello Base della lavorazione %s + + Heights + Altezze - - Base shape %s already in the list - Forma base %s già nell'elenco + + AreaOp Operation + Operazione AreaOp - - Ignoring vertex - Ignora il vertice + + Uncreate AreaOp Operation + Elimina l'operazione AreaOp + + + + Pick Start Point + Scegli il punto iniziale + + + + +<br>Pocket is based on extruded surface. + +<br>Tasca è basata su una superficie estrusa. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>La parte inferiore della tasca potrebbe non essere planare e/o non normale all'asse del mandrino. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>Il fondo della tasca 3D NON è disponibile per questa operazione</i>. + + + + Face appears misaligned after initial rotation. + La faccia appare disallineata dopo la rotazione iniziale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. + + + + Multiple faces in Base Geometry. + Più facce nella Geometria di base. + + + + Depth settings will be applied to all faces. + Le impostazioni di Profondità saranno applicate a tutte le facce. + + + + EnableRotation property is 'Off'. + La proprietà EnableRotation è 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Considerare di attivare la proprietà InverseAngle e di ricalcolare l'operazione. + + + + Processing subs individually ... + Elaborando individualmente i subs... + + + + Depth Warning + Avviso di Profondità + + + + Verify final depth of pocket shaped by vertical faces. + Verifica la profondità finale della tasca formata da facce verticali. + + + + Processing model as a whole ... + Elaborazione del modello nel suo complesso... + + + + Can not identify loop. + Impossibile identificare il ciclo. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Un avvio adattivo planare non è disponibile. Verrà eseguito Il tentativo non planare. + + + + The non-planar adaptive start is also unavailable. + Anche l'avvio non planare adattativo non è disponibile. + + + + Rotated to inverse angle. + Ruota all'angolo inverso. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Le funzioni selezionate richiedono 'Abilita rotazione: A(x)' per l'accesso. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Le funzioni selezionate richiedono 'Abilita rotazione: B(y)' per l'accesso. @@ -1173,39 +1153,59 @@ Selezionare sempre il bordo inferiore del foro quando si utilizza un bordo. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Un avvio adattivo planare non è disponibile. Verrà eseguito Il tentativo non planare. + + Unable to create path for face(s). + Impossibile creare il percorso per la faccia(e). - - The non-planar adaptive start is also unavailable. - Anche l'avvio non planare adattativo non è disponibile. + + Engraving Operations + Operazioni di incisione - - Didn't find job %s - Non riesco a trovare la lavorazione %s + + 3D Operations + Operazioni 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Angolo di taglio di %.2f invalido, deve essere compreso fra <90° e >=0° + + Project Setup + Imposta Progetto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angolo di taglio non valido %.2f, deve essere compreso tra >0° e <=180° + + Tool Commands + Comandi dell'utensile - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° + + New Operations + Nuove operazioni - - Cutting Edge Angle (%.2f) results in negative tool tip length - L'angolo di taglio (%.2f) risulta negativo nella lunghezza della punta dello strumento + + Path Modification + Modifica Percorso + + + + Helpful Tools + Strumenti utili + + + + &Path + &Percorso + + + + Path Dressup + Ottimizzazione del percorso + + + + Supplemental Commands + Comandi supplementari @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Ulteriori oggetti base da incidere - - - - The vertex index to start the path from - L'indice del vertice da cui iniziare il percorso - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Crea un percorso di incisione basato su una stringa di testo di Draft + + + Additional base objects to be engraved + Ulteriori oggetti base da incidere + + + + The vertex index to start the path from + L'indice del vertice da cui iniziare il percorso + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s non ha nessuna proprietà %s (%s)) - Cannot find property %s of %s Impossibile trovare la proprietà %s di %s + + + %s has no property %s (%s)) + %s non ha nessuna proprietà %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Elica + + + + Creates a Path Helix object from a features of a base object + Crea un oggetto Percorso elicoidale da una funzionalità di un oggetto di base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Raggio iniziale - - - Helix - Elica - - - - Creates a Path Helix object from a features of a base object - Crea un oggetto Percorso elicoidale da una funzionalità di un oggetto di base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Tipo di oggetto pezzo grezzo non supportato %s + + + + Unsupported stock type %s (%d) + Tipo di oggetto pezzo grezzo non supportato %s (%d) + + + + Stock not from Base bound box! + L'oggetto pezzo grezzo non appartiene all'elenco predefinito! + + + + Stock not a box! + L'oggetto pezzo grezzo non è un parallelepipedo! + + + + Stock not a cylinder! + L'oggetto grezzo non è un cilindro! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s La versione %s del modello di lavorazione non è supportata - - - Unsupported stock object %s - Tipo di oggetto pezzo grezzo non supportato %s - - - - Unsupported stock type %s (%d) - Tipo di oggetto pezzo grezzo non supportato %s (%d) - - - - Stock not from Base bound box! - L'oggetto pezzo grezzo non appartiene all'elenco predefinito! - - - - Stock not a box! - L'oggetto pezzo grezzo non è un parallelepipedo! - - - - Stock not a cylinder! - L'oggetto grezzo non è un cilindro! - Solids @@ -1669,42 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Stima del tempo di lavorazione - - - - Operations Cycle Time Estimation - Stima del tempo di lavorazione - - - - Base Geometry - Geometria Base - - - - Base Location - Posizione Base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth per questa operazione non può essere modificato. Se è necessario impostare manualmente il FinalDepth si prega di selezionare una operazione diversa. - - - - Depths - Profondità - - - - Operation - Operazione - The base geometry for this operation @@ -1750,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Etichetta utente assegnata + + + Operations Cycle Time Estimation + Stima del tempo di lavorazione + Base locations for this operation @@ -1815,6 +1784,37 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Opzione di refrigerazione per questa operazione + + + Base Geometry + Geometria Base + + + + Base Location + Posizione Base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth per questa operazione non può essere modificato. Se è necessario impostare manualmente il FinalDepth si prega di selezionare una operazione diversa. + + + + Depths + Profondità + + + + Operation + Operazione + + + + Job Cycle Time Estimation + Stima del tempo di lavorazione + PathOpGui @@ -1827,19 +1827,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Scegliere come elaborare più funzioni di Geometria base. + + 3D Pocket + Tasca 3D - - Pass Extension - Estensione di passata - - - - The distance the facing operation will extend beyond the boundary shape. - La distanza a cui l'operazione di profilatura si estenderà oltre la forma di contorno. + + Creates a Path 3D Pocket object from a face or faces + Crea un oggetto percorso per una Tasca 3D da una o più facce @@ -1857,14 +1852,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Le facce verticali non formano un ciclo - ignorare - - 3D Pocket - Tasca 3D + + Adaptive clearing and profiling + Spianatura e profilatura adattativa - - Creates a Path 3D Pocket object from a face or faces - Crea un oggetto percorso per una Tasca 3D da una o più facce + + Pass Extension + Estensione di passata + + + + The distance the facing operation will extend beyond the boundary shape. + La distanza a cui l'operazione di profilatura si estenderà oltre la forma di contorno. + + + + Choose how to process multiple Base Geometry features. + Scegliere come elaborare più funzioni di Geometria base. + + + + Final depth set below ZMin of face(s) selected. + Profondità finale impostata sotto ZMin delle facce selezionate. @@ -1891,16 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Crea un oggetto percorso Tasca da una o più facce - - - Adaptive clearing and profiling - Spianatura e profilatura adattativa - - - - Final depth set below ZMin of face(s) selected. - Profondità finale impostata sotto ZMin delle facce selezionate. - Generating toolpath with libarea offsets. @@ -1949,6 +1949,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profilo basato su una o più facce + Profile @@ -1992,12 +1997,12 @@ If it is necessary to set the FinalDepth manually please select a different oper No ExpandProfile support for ArchPanel models. - No ExpandProfile support for ArchPanel models. + Nessun supporto di ExpandProfile per i modelli ArchPannel. failed to return opening type. - failed to return opening type. + errore durante la restituzione del tipo di profilo di avvio. @@ -2019,11 +2024,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. Per i bordi aperti, controllare la profondità finale per questa operazione. - - - Profile based on face or faces - Profilo basato su una o più facce - Edge Profile @@ -2434,26 +2434,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Impossibile identificare l'utensile per l'operazione. - - - - Failed to map selected tool to an OCL tool type. - Impossibile far corrispondere l'utensile selezionato a un tipo di utensile OCL. - - - - Failed to translate active tool to OCL tool type. - Impossibile tradurre l'utensile attivo in un utensile di tipo OCL. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - Utensile OCL non disponibile. Non è possibile determinare se il cutter può essere inclinato. - This operation requires OpenCamLib to be installed. @@ -2537,28 +2517,48 @@ If it is necessary to set the FinalDepth manually please select a different oper No profile geometry shape returned. - No profile geometry shape returned. + Non è stata restituita alcuna forma della geometria del profilo. No profile path geometry returned. - No profile path geometry returned. + Non è stata restituita alcuna forma della geometria del profilo. No clearing shape returned. - No clearing shape returned. + Nessuna forma di compensazione restituita. No clearing path geometry returned. - No clearing path geometry returned. + Nessuna geometria del tracciato di compensazione restituita. No scan data to convert to Gcode. Nessun dato acquisito da convertire in Gcode. + + + Failed to identify tool for operation. + Impossibile identificare l'utensile per l'operazione. + + + + Failed to map selected tool to an OCL tool type. + Impossibile far corrispondere l'utensile selezionato a un tipo di utensile OCL. + + + + Failed to translate active tool to OCL tool type. + Impossibile tradurre l'utensile attivo in un utensile di tipo OCL. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + Utensile OCL non disponibile. Non è possibile determinare se il cutter può essere inclinato. + Hold on. This might take a minute. @@ -2608,7 +2608,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Face selection is unavailable for Rotational scans. - Face selection is unavailable for Rotational scans. + La selezione delle facce non è disponibile per le scansioni rotazionali. @@ -2633,32 +2633,32 @@ If it is necessary to set the FinalDepth manually please select a different oper Failed to create collective offset avoid face. - Failed to create collective offset avoid face. + Impossibile creare un offset collettivo evitando la faccia. Failed to create collective offset avoid internal features. - Failed to create collective offset avoid internal features. + Impossibile creare un offset collettivo evitando gli elementi interni. Path transitions might not avoid the model. Verify paths. - Path transitions might not avoid the model. Verify paths. + I percorsi di transizione possono toccare il modello. Controllare le traiettorie. Faild to extract processing region for Face - Faild to extract processing region for Face + Impossibile estrarre la regione di elaborazione per la Faccia No FACE data tuples received at instantiation of class. - No FACE data tuples received at instantiation of class. + Non sono state ricevute tuple di dati di Facce nella creazione di istanze della classe. Failed to identify a horizontal cross-section for Face - Failed to identify a horizontal cross-section for Face + Impossibile identificare una sezione trasversale orizzontale per Face @@ -2673,56 +2673,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Crea utensile - - - - Creates a new ToolBit object - Crea un nuovo oggetto Punta utensile - - - - Save Tool as... - Salva l'utensile come... - - - - Save Tool - Salva l'utensile - - - - Save an existing ToolBit object to a file - Salva un oggetto Punta utensile (ToolBit) esistente in un file - - - - Load Tool - Carica l'utensile - - - - Load an existing ToolBit object from a file - Carica un oggetto Punta utensile (ToolBit) esistente da un file - - - - Edit ToolBit - Modifica Punta utensile - - - - Uncreate ToolBit - Annulla la creazione di Punta utensile - - - - Create ToolBit - Crea Punta utensile - Shape for bit shape @@ -2763,6 +2713,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Modifica Punta utensile + + + + Uncreate ToolBit + Annulla la creazione di Punta utensile + + + + Create ToolBit + Crea Punta utensile + + + + Create Tool + Crea utensile + + + + Creates a new ToolBit object + Crea un nuovo oggetto Punta utensile + + + + Save Tool as... + Salva l'utensile come... + + + + Save Tool + Salva l'utensile + + + + Save an existing ToolBit object to a file + Salva un oggetto Punta utensile (ToolBit) esistente in un file + + + + Load Tool + Carica l'utensile + + + + Load an existing ToolBit object from a file + Carica un oggetto Punta utensile (ToolBit) esistente da un file + PathToolBitLibrary @@ -2789,6 +2789,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Errore nell'aggiornare TC: %s + The active tool @@ -2839,11 +2844,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Lo strumento usato da questo controllore - - - Error updating TC: %s - Errore nell'aggiornare TC: %s - PathToolLibraryManager @@ -3227,26 +3227,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Il percorso di base da modificare - - - - Solid object to be used to limit the generated Path. - Oggetto solido da utilizzare per limitare il percorso generato. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determina se il limite descrive una maschera di inclusione o esclusione. - - - - The selected object is not a path - L'oggetto selezionato non è un percorso - Create a Boundary dressup @@ -3272,6 +3252,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Crea un contorno limite del percorso + + + The base path to modify + Il percorso di base da modificare + + + + Solid object to be used to limit the generated Path. + Oggetto solido da utilizzare per limitare il percorso generato. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determina se il limite descrive una maschera di inclusione o esclusione. + + + + The selected object is not a path + L'oggetto selezionato non è un percorso + Path_DressupRampEntry @@ -3298,41 +3298,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Impossibile copiare i lembi - errore interno - - - - Create a Tag dressup - Crea una traiettoria aggiuntiva Lembi di fermo - - - - Tag Dress-up - Lembi di fermo - - - - Creates a Tag Dress-up object from a selected path - Crea un oggetto Lembi di fermo da un tracciato selezionato - - - - Please select one path object - Si prega di selezionare un oggetto Percorso - - - - Create Tag Dress-up - Crea lembi di fermo - - - - Holding Tag - Fermi - The base path to modify @@ -3373,6 +3338,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Fattore determinante il numero di segmenti usati per approssimare le linguette arrotondate. + + + Cannot insert holding tags for this path - please select a Profile path + Impossibile inserire i lembi di fermo per questo percorso - selezionare un percorso Profilo + + + + The selected object is not a path + L'oggetto selezionato non è un percorso + + + + Please select a Profile object + Si prega di selezionare un oggetto Profilo + + + + Holding Tag + Fermi + + + + Cannot copy tags - internal error + Impossibile copiare i lembi - errore interno + + + + Create a Tag dressup + Crea una traiettoria aggiuntiva Lembi di fermo + + + + Tag Dress-up + Lembi di fermo + + + + Creates a Tag Dress-up object from a selected path + Crea un oggetto Lembi di fermo da un tracciato selezionato + + + + Please select one path object + Si prega di selezionare un oggetto Percorso + + + + Create Tag Dress-up + Crea lembi di fermo + No Base object found. @@ -3393,21 +3408,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Il Percorso di base è vuoto. - - - The selected object is not a path - L'oggetto selezionato non è un percorso - - - - Please select a Profile object - Si prega di selezionare un oggetto Profilo - - - - Cannot insert holding tags for this path - please select a Profile path - Impossibile inserire i lembi di fermo per questo percorso - selezionare un percorso Profilo - Path_DressupZCorrect @@ -3528,6 +3528,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Lavorazione + + + + Creates a Path Job object + Crea un oggetto percorso di lavorazione + + + + Export Template + Esporta come modello + + + + Exports Path Job as a template to be used for other jobs + Esporta il percorso della lavorazione come modello per essere usato in altri lavori + + + + Create Job + Crea una lavorazione + Edit Job @@ -3553,31 +3578,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Selezione del modello - - - Create Job - Crea una lavorazione - - - - Job - Lavorazione - - - - Creates a Path Job object - Crea un oggetto percorso di lavorazione - - - - Export Template - Esporta come modello - - - - Exports Path Job as a template to be used for other jobs - Esporta il percorso della lavorazione come modello per essere usato in altri lavori - Path_OpActiveToggle @@ -3637,9 +3637,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Seleziona il File di Output + + Select Probe Point File + Selezionare il file del punto sonda @@ -3647,9 +3647,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Tutti i File (*.*) - - Select Probe Point File - Selezionare il file del punto sonda + + Select Output File + Seleziona il File di Output diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm index 89197c4f50..2e4e60c15c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 08faad855c..11f68bd026 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - プログラムにオプションまたは強制的な停止を追加 - - - - The base object this collision refers to - この衝突が参照するベースオブジェクト - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - 角部での工具の動き方を制御。既定＝ラウンド - - - - Maximum distance before a miter join is truncated - マイタ継ぎ手がとがるまでの最大距離 - - - - The base geometry of this toolpath - このツールパスのベースジオメトリー - - - - Extra value to stay away from final profile- good for roughing toolpath - 粗加工時に残す仕上げ輪郭の値。 - - - - Profile holes as well as the outline - 輪郭と同様に穴をプロファイル - - - - Profile the outline - 輪郭をプロファイル - - - - Profile round holes - 円形の穴をプロファイル - - - - Side of edge that tool should cut - ツールが切断するエッジ両端 - - - - Make True, if using Cutter Radius Compensation - 工具径補正を使用する場合は True - - - - Reverse direction of pocket operation. - ポケット工程の方向を反転 - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - 角度を反転。例: -22.5 -> 22.5 度 - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - このホップによって到達するオブジェクト - - - - The Z height of the hop - ホップのZ高さ - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. モジュールがDEBUGモード時に、一時パス、構築オブジェクトを表示します。 - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - 開始点を指定する場合は True - - - - Incremental Drill depth before retracting to clear chips - チップのクリアのための後退前に増やすドリル深さ - - - - Enable pecking - ペックを有効 - - - - The time to dwell between peck cycles - ペックサイクル間のドウェル時間 - - - - Enable dwell - ドウェルを有効 - - - - Calculate the tip length and subtract from final depth - チップの長さを計算し、最終的な深さから減算 - - - - Controls how tool retracts Default=G98 - ツールを後退(後サイクルの送り復帰) させる制御コード。 デフォルト=G98 - - - - The height where feed starts and height during retract tool when path is finished - フィード開始位置の高さとパス終了時のツール後退中の高さ - - - - Controls how tool retracts Default=G99 - ツールがリトラクトする方法を制御します。 デフォルト=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - フィクスチャーオフセット番号 - - - - Make False, to prevent operation from generating code - 生成されたコードの工程を止めるにはFalseにします - - - - Extra offset to apply to the operation. Direction is operation dependent. - 工程に適用する追加オフセット。方向は工程に依存して変わります。 - - - - Start pocketing at center or boundary - 中心または境界へのポケット作成を開始 - - - - Percent of cutter diameter to step over on each pass - 工具直径に対する経路同士の重なり率（％） - - - - Angle of the zigzag pattern - ジグザグパターンの角度 - - - - Clearing pattern to use - 使用するパターンをクリア - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - CNC パスの方向平面 - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + 開始点を指定する場合は True + The path to be copied コピーするパス + + + The base geometry of this toolpath + このツールパスのベースジオメトリー + The tool controller that will be used to calculate the path パスの計算に使用するツールコント ローラー - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ コーナーアクション中に発生する高さ - - Ramping Method - ランピング加工 + + The object to be reached by this hop + このホップによって到達するオブジェクト - - Which feed rate to use for ramping - ランプに使用する送り速度 + + The Z height of the hop + ホップのZ高さ - - Custom feedrate - 独自フィードレート + + X offset between tool and probe + ツールとプローブ間のXオフセット - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + ツールとプローブ間のYオフセット - - Should the dressup ignore motion commands above DressupStartDepth - DressupStartDepth の上ではドレスアップはモーションコマンドを無視します + + Number of points to probe in X direction + X方向にプローブするポイントの数 - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - ランプドレスアップが有効な場所での深さ。この上ではランプは生成されませんが、モーションコマンドはそのまま渡されます。 + + Number of points to probe in Y direction + Y方向にプローブするポイントの数 - - Pattern method - パターン加工 - - - - Shape to use for calculating Boundary - 境界の計算に使用するシェイプ - - - - Clear edges of surface (Only applicable to BoundBox) - サーフェスのエッジをクリアする（BoundBoxのみに適用） - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + フィクスチャーオフセット番号 + + + + Make False, to prevent operation from generating code + 生成されたコードの工程を止めるにはFalseにします + + + + Ramping Method + ランピング加工 + + + + Which feed rate to use for ramping + ランプに使用する送り速度 + + + + Custom feedrate + 独自フィードレート + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + DressupStartDepth の上ではドレスアップはモーションコマンドを無視します + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + ランプドレスアップが有効な場所での深さ。この上ではランプは生成されませんが、モーションコマンドはそのまま渡されます。 + + + + Incremental Drill depth before retracting to clear chips + チップのクリアのための後退前に増やすドリル深さ + + + + Enable pecking + ペックを有効 + + + + The time to dwell between peck cycles + ペックサイクル間のドウェル時間 + + + + Enable dwell + ドウェルを有効 + + + + Calculate the tip length and subtract from final depth + チップの長さを計算し、最終的な深さから減算 + + + + Controls how tool retracts Default=G98 + ツールを後退(後サイクルの送り復帰) させる制御コード。 デフォルト=G98 + + + + The height where feed starts and height during retract tool when path is finished + フィード開始位置の高さとパス終了時のツール後退中の高さ + + + + Controls how tool retracts Default=G99 + ツールがリトラクトする方法を制御します。 デフォルト=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + ポケット工程の方向を反転 + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + 角度を反転。例: -22.5 -> 22.5 度 + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + CNC パスの方向平面 + + + + Shape to use for calculating Boundary + 境界の計算に使用するシェイプ + + + + Clear edges of surface (Only applicable to BoundBox) + サーフェスのエッジをクリアする（BoundBoxのみに適用） + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + この衝突が参照するベースオブジェクト + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - ツールとプローブ間のXオフセット + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + ツールパスが部品の周りを移動する時の方向: 時計回り (CW) または 反時計回り (CCW) - - Y offset between tool and probe - ツールとプローブ間のYオフセット + + Extra offset to apply to the operation. Direction is operation dependent. + 工程に適用する追加オフセット。方向は工程に依存して変わります。 - - Number of points to probe in X direction - X方向にプローブするポイントの数 + + Start pocketing at center or boundary + 中心または境界へのポケット作成を開始 - - Number of points to probe in Y direction - Y方向にプローブするポイントの数 + + Percent of cutter diameter to step over on each pass + 工具直径に対する経路同士の重なり率（％） - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + ジグザグパターンの角度 + + + + Clearing pattern to use + 使用するパターンをクリア + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + プログラムにオプションまたは強制的な停止を追加 + + + + Pattern method + パターン加工 + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + 角部での工具の動き方を制御。既定＝ラウンド + + + + Maximum distance before a miter join is truncated + マイタ継ぎ手がとがるまでの最大距離 + + + + Extra value to stay away from final profile- good for roughing toolpath + 粗加工時に残す仕上げ輪郭の値。 + + + + Profile holes as well as the outline + 輪郭と同様に穴をプロファイル + + + + Profile the outline + 輪郭をプロファイル + + + + Profile round holes + 円形の穴をプロファイル + + + + Side of edge that tool should cut + ツールが切断するエッジ両端 + + + + Make True, if using Cutter Radius Compensation + 工具径補正を使用する場合は True @@ -894,178 +894,50 @@ Path - - - Engraving Operations - 彫刻操作 - - - - 3D Operations - 3D オペレーション - - - - Project Setup - プロジェクトのセットアップ - - - - Tool Commands - ツールコマンド - - - - New Operations - 新しい工程 - - - - Path Modification - パス変更 - - - - Helpful Tools - 便利なツール - - - - &Path - パス(&P) - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - 面に対するパスを作成できません。 - - - - Face appears misaligned after initial rotation. - 初期回転後、面が不整状態になります。 - - - - Consider toggling the 'InverseAngle' property and recomputing. - 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 - - - - Multiple faces in Base Geometry. - ベースジオメトリーの複数面 - - - - Depth settings will be applied to all faces. - 深さの設定を全ての面に適用します - - - - EnableRotation property is 'Off'. - EnableRotation プロパティーが「オフ」になっています。 - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>ポケットは、押し出しをしたサーフェスに基づいています。 - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>ポケットの下側が、非平面的となっているか、かつ／又は、スピンドル軸が標準ではない可能性があります。 - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D ポケットのボタンは、このオペレーションに用意されて<strong>いません</strong> </i>。 - - - - Consider toggling the InverseAngle property and recomputing the operation. - InverseAngleプロパティを切り替えて、作業を再計算することを検討して下さい。 - - - - Processing subs individually ... - サブルーチンを個別に処理… - - - - Depth Warning - 深度の警告 - - - - Verify final depth of pocket shaped by vertical faces. - 垂直面によって成形されたポケットの深さを確認 - - - - Processing model as a whole ... - モデル全体を処理... - - - - Can not identify loop. - ループが識別できません。 - Edit 編集 - - Heights - 高さ + + %s is not a Base Model object of the job %s + %s は、 ジョブ %s のベースモデル・オブジェクトではありません - - AreaOp Operation - AreaOp工程 + + Base shape %s already in the list + ベースシェイプ %s が既にリスト中にあります。 - - Uncreate AreaOp Operation - AreaOp工程を破棄 + + Ignoring vertex + 頂点を無視 - - Pick Start Point - 開始点を選択 + + Didn't find job %s + ジョブ %s が見つかりませんでした。 + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + %.2fは 無効な切れ刃角です。切れ刃角は <90° and >=0° でなければなりません + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + 切れ刃角 (%.2f) は、負の歯先距離をもたらします @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s は、 ジョブ %s のベースモデル・オブジェクトではありません + + Heights + 高さ - - Base shape %s already in the list - ベースシェイプ %s が既にリスト中にあります。 + + AreaOp Operation + AreaOp工程 - - Ignoring vertex - 頂点を無視 + + Uncreate AreaOp Operation + AreaOp工程を破棄 + + + + Pick Start Point + 開始点を選択 + + + + +<br>Pocket is based on extruded surface. + +<br>ポケットは、押し出しをしたサーフェスに基づいています。 + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>ポケットの下側が、非平面的となっているか、かつ／又は、スピンドル軸が標準ではない可能性があります。 + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D ポケットのボタンは、このオペレーションに用意されて<strong>いません</strong> </i>。 + + + + Face appears misaligned after initial rotation. + 初期回転後、面が不整状態になります。 + + + + Consider toggling the 'InverseAngle' property and recomputing. + 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 + + + + Multiple faces in Base Geometry. + ベースジオメトリーの複数面 + + + + Depth settings will be applied to all faces. + 深さの設定を全ての面に適用します + + + + EnableRotation property is 'Off'. + EnableRotation プロパティーが「オフ」になっています。 + + + + Consider toggling the InverseAngle property and recomputing the operation. + InverseAngleプロパティを切り替えて、作業を再計算することを検討して下さい。 + + + + Processing subs individually ... + サブルーチンを個別に処理… + + + + Depth Warning + 深度の警告 + + + + Verify final depth of pocket shaped by vertical faces. + 垂直面によって成形されたポケットの深さを確認 + + + + Processing model as a whole ... + モデル全体を処理... + + + + Can not identify loop. + ループが識別できません。 + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + 面に対するパスを作成できません。 - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + 彫刻操作 - - Didn't find job %s - ジョブ %s が見つかりませんでした。 + + 3D Operations + 3D オペレーション - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - %.2fは 無効な切れ刃角です。切れ刃角は <90° and >=0° でなければなりません + + Project Setup + プロジェクトのセットアップ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + ツールコマンド - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 + + New Operations + 新しい工程 - - Cutting Edge Angle (%.2f) results in negative tool tip length - 切れ刃角 (%.2f) は、負の歯先距離をもたらします + + Path Modification + パス変更 + + + + Helpful Tools + 便利なツール + + + + &Path + パス(&P) + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - 追加の彫刻されるベースオブジェクト - - - - The vertex index to start the path from - パスを開始する頂点インデックス - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString ドラフト ShapeString 周りの彫刻パスを作成 + + + Additional base objects to be engraved + 追加の彫刻されるベースオブジェクト + + + + The vertex index to start the path from + パスを開始する頂点インデックス + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s にはプロパティー %s (%s) がありません - Cannot find property %s of %s プロパティー %s （%s）を見つけることができません + + + %s has no property %s (%s)) + %s にはプロパティー %s (%s) がありません + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + 螺旋 + + + + Creates a Path Helix object from a features of a base object + ベースオブジェクトのフィーチャーからパスヘリックスオブジェクトを作成 + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - 螺旋 - - - - Creates a Path Helix object from a features of a base object - ベースオブジェクトのフィーチャーからパスヘリックスオブジェクトを作成 - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + サポートされていないストックオブジェクト %s + + + + Unsupported stock type %s (%d) + サポートされていないストックタイプ %s (%d) + + + + Stock not from Base bound box! + ストックが基本バウンディングボックスから開始していません! + + + + Stock not a box! + ストックがボックスではありません! + + + + Stock not a cylinder! + ストックが円筒ではありません! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s サポートされていないPathJobテンプレートのバージョン %s - - - Unsupported stock object %s - サポートされていないストックオブジェクト %s - - - - Unsupported stock type %s (%d) - サポートされていないストックタイプ %s (%d) - - - - Stock not from Base bound box! - ストックが基本バウンディングボックスから開始していません! - - - - Stock not a box! - ストックがボックスではありません! - - - - Stock not a cylinder! - ストックが円筒ではありません! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - ベースジオメトリー - - - - Base Location - ベース位置 - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - この操作のためにFinalDepthを変更することができません。 -FinalDepthを手動で設定する必要がある場合は別の操作を選択してください。 - - - - Depths - 深さ - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 User Assigned Label ユーザー割り当てラベル + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Coolant option for this operation Coolant option for this operation + + + Base Geometry + ベースジオメトリー + + + + Base Location + ベース位置 + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + この操作のためにFinalDepthを変更することができません。 +FinalDepthを手動で設定する必要がある場合は別の操作を選択してください。 + + + + Depths + 深さ + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3Dポケット - - Pass Extension - 経路の拡張 - - - - The distance the facing operation will extend beyond the boundary shape. - 境界シェイプを超えてフェイシング工程を延長する距離 + + Creates a Path 3D Pocket object from a face or faces + 1面または複数面からパス・3Dポケット・オブジェクトを作成 @@ -1858,14 +1853,29 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 垂直面がループを形成していません - 無視します - - 3D Pocket - 3Dポケット + + Adaptive clearing and profiling + 自動によるクリーニングとプロファイリング - - Creates a Path 3D Pocket object from a face or faces - 1面または複数面からパス・3Dポケット・オブジェクトを作成 + + Pass Extension + 経路の拡張 + + + + The distance the facing operation will extend beyond the boundary shape. + 境界シェイプを超えてフェイシング工程を延長する距離 + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a Path Pocket object from a face or faces 1面または複数面からパス・ポケット・オブジェクトを作成 - - - Adaptive clearing and profiling - 自動によるクリーニングとプロファイリング - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathProfile + + + Profile based on face or faces + 面に基づくプロファイル + Profile @@ -2020,11 +2025,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - 面に基づくプロファイル - Edge Profile @@ -2435,26 +2435,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathToolBit - - - Create Tool - ツールの作成 - - - - Creates a new ToolBit object - 新しいToolBitオブジェクトを作成 - - - - Save Tool as... - Save Tool as... - - - - Save Tool - ツールを保存 - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - ツールを読み込む - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - ツールビットの編集 - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - ツールビットを作成 - Shape for bit shape @@ -2764,6 +2714,56 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + ツールビットの編集 + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + ツールビットを作成 + + + + Create Tool + ツールの作成 + + + + Creates a new ToolBit object + 新しいToolBitオブジェクトを作成 + + + + Save Tool as... + Save Tool as... + + + + Save Tool + ツールを保存 + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + ツールを読み込む + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathToolController + + + Error updating TC: %s + TC更新エラー: %s + The active tool @@ -2840,11 +2845,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 The tool used by this controller このコント ローラーが使用するツール - - - Error updating TC: %s - TC更新エラー: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_DressupPathBoundary - - - The base path to modify - 変更するベースパス - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - 選択されたオブジェクトはパスではありません - Create a Boundary dressup @@ -3273,6 +3253,26 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + 変更するベースパス + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + 選択されたオブジェクトはパスではありません + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - タグ・ドレスアップを作成 - - - - Tag Dress-up - タグ・ドレスアップ - - - - Creates a Tag Dress-up object from a selected path - 選択したパスからタグ・ドレスアップ・オブジェクトを作成 - - - - Please select one path object - パスオブジェクトをひとつ選択してください - - - - Create Tag Dress-up - タグ・ドレスアップを作成 - - - - Holding Tag - 保持タグ - The base path to modify @@ -3374,6 +3339,56 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Factor determining the # of segments used to approximate rounded tags. 曲線タグの近似で使用される線分数を決定する係数 + + + Cannot insert holding tags for this path - please select a Profile path + このパスに対して保持タグを挿入することができません - プロファイルパスを選択してください。 + + + + The selected object is not a path + 選択されたオブジェクトはパスではありません + + + + Please select a Profile object + プロファイルオブジェクトを選択してください。 + + + + Holding Tag + 保持タグ + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + タグ・ドレスアップを作成 + + + + Tag Dress-up + タグ・ドレスアップ + + + + Creates a Tag Dress-up object from a selected path + 選択したパスからタグ・ドレスアップ・オブジェクトを作成 + + + + Please select one path object + パスオブジェクトをひとつ選択してください + + + + Create Tag Dress-up + タグ・ドレスアップを作成 + No Base object found. @@ -3394,21 +3409,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Base Path is empty. ベースパスが空です。 - - - The selected object is not a path - 選択されたオブジェクトはパスではありません - - - - Please select a Profile object - プロファイルオブジェクトを選択してください。 - - - - Cannot insert holding tags for this path - please select a Profile path - このパスに対して保持タグを挿入することができません - プロファイルパスを選択してください。 - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Job + + + Job + ジョブ + + + + Creates a Path Job object + パス・ジョブ・オブジェクトを作成 + + + + Export Template + テンプレートをエクスポート + + + + Exports Path Job as a template to be used for other jobs + パスジョブを他のジョブで使用するテンプレートとしてエクスポート + + + + Create Job + ジョブを作成 + Edit Job @@ -3554,31 +3579,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Model Selection モデルの選択 - - - Create Job - ジョブを作成 - - - - Job - ジョブ - - - - Creates a Path Job object - パス・ジョブ・オブジェクトを作成 - - - - Export Template - テンプレートをエクスポート - - - - Exports Path Job as a template to be used for other jobs - パスジョブを他のジョブで使用するテンプレートとしてエクスポート - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Probe - - Select Output File - 出力ファイルを選択 + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 すべてのファイル (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + 出力ファイルを選択 diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm index 7ca8dc8d48..1858ecb56f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm and b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts index f8227f7c33..1877e78290 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Ajouter une arrêt facultatif ou obligatoire du programme - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - - - - Extra value to stay away from final profile- good for roughing toolpath - Surépaisseur par rapport au profil final - valable pour une ébauche - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Côté de l'arête que l'outil doit couper - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - L'objet à atteindre avec ce saut - - - - The Z height of the hop - La hauteur Z de ce saut - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Marquer « true » si vous définissez un point de départ - - - - Incremental Drill depth before retracting to clear chips - Incrément de profondeur de percement avant retrait pour enlever les copeaux - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Nombre de déports de l'outillage - - - - Make False, to prevent operation from generating code - Marquer « false », pour empêcher l'opération ne génére du code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Débuter la création de la poche au centre ou sur la limite - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Plan d'orientation du parcours CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Marquer « true » si vous définissez un point de départ + The path to be copied Le chemin d'accès à copier + + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + L'objet à atteindre avec ce saut - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + La hauteur Z de ce saut - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Nombre de déports de l'outillage + + + + Make False, to prevent operation from generating code + Marquer « false », pour empêcher l'opération ne génére du code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incrément de profondeur de percement avant retrait pour enlever les copeaux + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + La hauteur de départ et la hauteur de retrait de l'outil quand son parcours est terminé + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Plan d'orientation du parcours CNC + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Débuter la création de la poche au centre ou sur la limite - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Ajouter une arrêt facultatif ou obligatoire du programme + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Surépaisseur par rapport au profil final - valable pour une ébauche + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Côté de l'arête que l'outil doit couper + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Tawila n usenfaṛ - - - - Tool Commands - Tool Commands - - - - New Operations - Timhalin timaynutin - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Éditer - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Tawila n usenfaṛ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Timhalin timaynutin - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Le parcours de base à modifier - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Le parcours de base à modifier + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm index aaec86872c..e2e63dff2c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index bd882b9231..03ad3b62b0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - 패턴 방법 - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + 패턴 방법 + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - 프로젝트 설정 - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit 편집 - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + 프로젝트 설정 - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + 나선 + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - 나선 - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm index 8ab549b805..42bca7e385 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm and b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index 3bf87e3286..c6fa859233 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Taisyti - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Nepaisoma viršūnių - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Nepaisoma viršūnių + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - Pradinės viršūnės indeksas - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + Pradinės viršūnės indeksas + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Sraigtas + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1511,17 +1521,7 @@ Starting Radius - Starting Radius - - - - Helix - Helix - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object + Pradinis spindulys @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper All Files (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm index 6fb11d77e4..21781d7314 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index b82558cc0c..92789e8db4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Optionele of verplichte stop toevoegen aan het programma - - - - The base object this collision refers to - Het basisobject waar deze botsing naar verwijst - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - De richting waarin het gereedschapspad om het onderdeel rechtsom (CW) of linksom (CCW) heen moet gaan - - - - Extend the profile clearing beyond the Extra Offset. - Breid het profiel schonen uit tot na de Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Stel het stepover-percentage in op basis van de diameter van het gereedschap. - - - - Controls how tool moves around corners. Default=Round - Bepaalt hoe het gereedschap zich door de hoeken beweegt. Standaard=Rond - - - - Maximum distance before a miter join is truncated - Maximale afstand voordat een verstekverbinding wordt ingekort - - - - The base geometry of this toolpath - De basisgeometrie voor dit gereedschapspad - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra waarde om weg te blijven van het uiteindelijke profiel- goed voor het opruwen van het gereedschapspad - - - - Profile holes as well as the outline - Profielgaten evenals de omtrek - - - - Profile the outline - Profileer de contouren - - - - Profile round holes - Profileer ronde gaten - - - - Side of edge that tool should cut - Kant van de rand die het gereedschap moet snijden - - - - Make True, if using Cutter Radius Compensation - Zet Waar indien u gebruik maakt van de straalcompensatie van de snijder - - - - Reverse direction of pocket operation. - Richting van de uitsparingsbewerking omkeren. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Keer de hoek om. Voorbeeld: -22,5 -> 22.5 graden. - - - - Attempt the inverse angle for face access if original rotation fails. - Probeer de omgekeerde hoek voor toegang tot het vlak als de oorspronkelijke rotatie mislukt. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - De Z-diepte van het geselecteerde vlak afdwingen als de laagste waarde voor de einddiepte. Hogere gebruikerswaarden worden in acht genomen. - - - - The object to be reached by this hop - Het te bereiken object van deze sprong - - - - The Z height of the hop - De Z-hoogte van de sprong - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Schakel de rotatie in om toegang te krijgen tot uitsparingen/zones die niet normaal zijn voor de Z-as. - Show the temporary path construction objects when module is in DEBUG mode. Toon de tijdelijke padconstructie-objecten wanneer de module in DEBUG-modus staat. - - - Enter custom start point for slot path. - Voer eigen startpunt in voor het pad van het slot. - - - - Enter custom end point for slot path. - Voer eigen eindpunt voor het slotpad in. - - - - Set the geometric clearing pattern to use for the operation. - Stel het geometrische ontruimingspatroon in voor de bewerking. - - - - Positive extends the beginning of the path, negative shortens. - Positief vergroot het begin van het pad, negatief verkleint het. - - - - Positive extends the end of the path, negative shortens. - Positief vergroot het eind van het pad, negatief verkort. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Voltooi de bewerking in één doorgang op diepte of meerdere doorgangen naar de einddiepte. - - - - Choose the path orientation with regard to the feature(s) selected. - Kies de richting van het pad met betrekking tot de geselecteerde functie(s). - - - - Choose what point to use on the first selected feature. - Kies welk punt je wilt gebruiken op de eerste geselecteerde functie. - - - - Choose what point to use on the second selected feature. - Kies welk punt je wilt gebruiken voor de tweede geselecteerde functie. - - - - For arcs/circlular edges, offset the radius for the path. - Verander voor bogen/circlulaire randen de radius voor het pad. - - - - Enable to reverse the cut direction of the slot path. - Inschakelen om de snijrichting van het slotpad om te keren. - - - - The custom start point for the path of this operation - Het aangepaste startpunt voor het pad van deze bewerking - - - - Make True, if specifying a Start Point - Maak Waar, indien een startpunt wordt gespecificeerd - - - - Incremental Drill depth before retracting to clear chips - Incrementele boordiepte voor het intrekken van de boor om de spanen te verwijderen - - - - Enable pecking - Priemen inschakelen - - - - The time to dwell between peck cycles - De wachttijd tussen de priemcycli - - - - Enable dwell - Stilstand inschakelen - - - - Calculate the tip length and subtract from final depth - Bereken de tiplengte en trek deze af van de einddiepte - - - - Controls how tool retracts Default=G98 - Controleert hoe het gereedschap terugtrekt Standaard=G98 - - - - The height where feed starts and height during retract tool when path is finished - De hoogte waar de invoer begint en de hoogte tijdens het intrekken van de functie wanneer het pad voltooid is - - - - Controls how tool retracts Default=G99 - Controleert hoe het gereedschap terugtrekt Standaard=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - De hoogte waar de invoer begint en de hoogte tijdens het intrekken van het gereedschap wanneer het pad voltooid is tijdens een priembewerking - - - - How far the drill depth is extended - Hoe ver de boordiepte is uitgebreid - - - - Fixture Offset Number - Bevestingverschuivingsnummer - - - - Make False, to prevent operation from generating code - Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking. - - - - Start pocketing at center or boundary - Begin met het uithollen in het midden of op de grens - - - - Percent of cutter diameter to step over on each pass - Percentage van de diameter van de frees om over te stappen bij elke passage - - - - Angle of the zigzag pattern - Hoek van het zigzagpatroon - - - - Clearing pattern to use - Te gebruiken ontruimingspatroon - - - - Use 3D Sorting of Path - Gebruik 3D-sortering van pad - - - - Attempts to avoid unnecessary retractions. - Pogingen om onnodige intrekkingen te vermijden. - - - - Orientation plane of CNC path - Oriëntatievlak van de CNC-pad - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Stel de richting van het snijgereedschap in om het materiaal vast te zetten: Klimmen (rechtsom) of conventioneel (linksom) + + + Set the geometric clearing pattern to use for the operation. + Stel het geometrische ontruimingspatroon in voor de bewerking. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Stel de Z-as diepteverstelling in ten opzichte van het doeloppervlak. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Voltooi de bewerking in één doorgang op diepte of meerdere doorgangen naar de einddiepte. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Stel de bemonsteringsresolutie in. Kleinere waarden verhogen snel de verwerkingstijd. + + + Set the stepover percentage, based on the tool's diameter. + Stel het stepover-percentage in op basis van de diameter van het gereedschap. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: drie kleinste geïdentificeerde gaten in de padgeometrie. + + + The custom start point for the path of this operation + Het aangepaste startpunt voor het pad van deze bewerking + + + + Make True, if specifying a Start Point + Maak Waar, indien een startpunt wordt gespecificeerd + The path to be copied Het te kopiëren pad + + + The base geometry of this toolpath + De basisgeometrie voor dit gereedschapspad + The tool controller that will be used to calculate the path De gereedschapsregelaar die gebruikt zal worden om het pad te berekenen - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd aanzienlijk. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd niet aanzienlijk. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Selecteer het te gebruiken algoritme: OCL Dropcutter*, of Experimenteel (niet gebaseerd op OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Stel in om de laatste laag te wissen in een `Multi-pass`-bewerking. - - - - Ignore outer waterlines above this height. - Negeer buitenste waterlijnen boven deze hoogte. - The base path to modify @@ -534,54 +269,39 @@ Hoogte om te verhogen tijdens hoek actie - - Ramping Method - Methode voor de glooiing + + The object to be reached by this hop + Het te bereiken object van deze sprong - - Which feed rate to use for ramping - Welke invoersnelheid te gebruiken voor de glooiing + + The Z height of the hop + De Z-hoogte van de sprong - - Custom feedrate - Aangepaste invoersnelheid + + X offset between tool and probe + X-verschuiving tussen gereedschap en taster - - Custom feed rate - Aangepaste invoersnelheid + + Y offset between tool and probe + Y-verschuiving tussen gereedschap en taster - - Should the dressup ignore motion commands above DressupStartDepth - Mocht de verkleding bewegingscommando's negeren boven DressupStartDepth + + Number of points to probe in X direction + Aantal te onderzoeken punten in X-richting - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - De diepte waar de verkleding van de glooiing is ingeschakeld. Boven deze glooiingen worden geen bewegingscommando's gegenereerd, maar worden de bewegingscommando's doorgelaten zoals ze zijn. + + Number of points to probe in Y direction + Aantal te onderzoeken punten in Y-richting - - Pattern method - Patroonmethode - - - - Shape to use for calculating Boundary - Vorm te gebruiken voor het berekenen van de grens - - - - Clear edges of surface (Only applicable to BoundBox) - Wis de randen van het oppervlak (alleen van toepassing op BoundBox) - - - - Exclude milling raised areas inside the face. - Sluit het frezen van verhoogde gebieden in het vlak uit. + + The output location for the probe data to be written + De uitgangslocatie voor de te schrijven tastgegevens @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation LeadInOut toepassen op lagen binnen een bewerking + + + Fixture Offset Number + Bevestingverschuivingsnummer + + + + Make False, to prevent operation from generating code + Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd + + + + Ramping Method + Methode voor de glooiing + + + + Which feed rate to use for ramping + Welke invoersnelheid te gebruiken voor de glooiing + + + + Custom feedrate + Aangepaste invoersnelheid + + + + Custom feed rate + Aangepaste invoersnelheid + + + + Should the dressup ignore motion commands above DressupStartDepth + Mocht de verkleding bewegingscommando's negeren boven DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + De diepte waar de verkleding van de glooiing is ingeschakeld. Boven deze glooiingen worden geen bewegingscommando's gegenereerd, maar worden de bewegingscommando's doorgelaten zoals ze zijn. + + + + Incremental Drill depth before retracting to clear chips + Incrementele boordiepte voor het intrekken van de boor om de spanen te verwijderen + + + + Enable pecking + Priemen inschakelen + + + + The time to dwell between peck cycles + De wachttijd tussen de priemcycli + + + + Enable dwell + Stilstand inschakelen + + + + Calculate the tip length and subtract from final depth + Bereken de tiplengte en trek deze af van de einddiepte + + + + Controls how tool retracts Default=G98 + Controleert hoe het gereedschap terugtrekt Standaard=G98 + + + + The height where feed starts and height during retract tool when path is finished + De hoogte waar de invoer begint en de hoogte tijdens het intrekken van de functie wanneer het pad voltooid is + + + + Controls how tool retracts Default=G99 + Controleert hoe het gereedschap terugtrekt Standaard=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + De hoogte waar de invoer begint en de hoogte tijdens het intrekken van het gereedschap wanneer het pad voltooid is tijdens een priembewerking + + + + How far the drill depth is extended + Hoe ver de boordiepte is uitgebreid + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Schakel de rotatie in om toegang te krijgen tot uitsparingen/zones die niet normaal zijn voor de Z-as. + + + + Reverse direction of pocket operation. + Richting van de uitsparingsbewerking omkeren. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Keer de hoek om. Voorbeeld: -22,5 -> 22.5 graden. + + + + Attempt the inverse angle for face access if original rotation fails. + Probeer de omgekeerde hoek voor toegang tot het vlak als de oorspronkelijke rotatie mislukt. + + + + Orientation plane of CNC path + Oriëntatievlak van de CNC-pad + + + + Shape to use for calculating Boundary + Vorm te gebruiken voor het berekenen van de grens + + + + Clear edges of surface (Only applicable to BoundBox) + Wis de randen van het oppervlak (alleen van toepassing op BoundBox) + + + + Exclude milling raised areas inside the face. + Sluit het frezen van verhoogde gebieden in het vlak uit. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd aanzienlijk. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd niet aanzienlijk. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Selecteer het te gebruiken algoritme: OCL Dropcutter*, of Experimenteel (niet gebaseerd op OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Stel in om de laatste laag te wissen in een `Multi-pass`-bewerking. + + + + Ignore outer waterlines above this height. + Negeer buitenste waterlijnen boven deze hoogte. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + De Z-diepte van het geselecteerde vlak afdwingen als de laagste waarde voor de einddiepte. Hogere gebruikerswaarden worden in acht genomen. + + + + The base object this collision refers to + Het basisobject waar deze botsing naar verwijst + + + + Enter custom start point for slot path. + Voer eigen startpunt in voor het pad van het slot. + + + + Enter custom end point for slot path. + Voer eigen eindpunt voor het slotpad in. + + + + Positive extends the beginning of the path, negative shortens. + Positief vergroot het begin van het pad, negatief verkleint het. + + + + Positive extends the end of the path, negative shortens. + Positief vergroot het eind van het pad, negatief verkort. + + + + Choose the path orientation with regard to the feature(s) selected. + Kies de richting van het pad met betrekking tot de geselecteerde functie(s). + + + + Choose what point to use on the first selected feature. + Kies welk punt je wilt gebruiken op de eerste geselecteerde functie. + + + + Choose what point to use on the second selected feature. + Kies welk punt je wilt gebruiken voor de tweede geselecteerde functie. + + + + For arcs/circlular edges, offset the radius for the path. + Verander voor bogen/circlulaire randen de radius voor het pad. + + + + Enable to reverse the cut direction of the slot path. + Inschakelen om de snijrichting van het slotpad om te keren. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Verwerk het model en de stock in een operatie zonder gekozen basisgeometrie. - - X offset between tool and probe - X-verschuiving tussen gereedschap en taster + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + De richting waarin het gereedschapspad om het onderdeel rechtsom (CW) of linksom (CCW) heen moet gaan - - Y offset between tool and probe - Y-verschuiving tussen gereedschap en taster + + Extra offset to apply to the operation. Direction is operation dependent. + Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking. - - Number of points to probe in X direction - Aantal te onderzoeken punten in X-richting + + Start pocketing at center or boundary + Begin met het uithollen in het midden of op de grens - - Number of points to probe in Y direction - Aantal te onderzoeken punten in Y-richting + + Percent of cutter diameter to step over on each pass + Percentage van de diameter van de frees om over te stappen bij elke passage - - The output location for the probe data to be written - De uitgangslocatie voor de te schrijven tastgegevens + + Angle of the zigzag pattern + Hoek van het zigzagpatroon + + + + Clearing pattern to use + Te gebruiken ontruimingspatroon + + + + Use 3D Sorting of Path + Gebruik 3D-sortering van pad + + + + Attempts to avoid unnecessary retractions. + Pogingen om onnodige intrekkingen te vermijden. + + + + Add Optional or Mandatory Stop to the program + Optionele of verplichte stop toevoegen aan het programma + + + + Pattern method + Patroonmethode + + + + Extend the profile clearing beyond the Extra Offset. + Breid het profiel schonen uit tot na de Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Bepaalt hoe het gereedschap zich door de hoeken beweegt. Standaard=Rond + + + + Maximum distance before a miter join is truncated + Maximale afstand voordat een verstekverbinding wordt ingekort + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra waarde om weg te blijven van het uiteindelijke profiel- goed voor het opruwen van het gereedschapspad + + + + Profile holes as well as the outline + Profielgaten evenals de omtrek + + + + Profile the outline + Profileer de contouren + + + + Profile round holes + Profileer ronde gaten + + + + Side of edge that tool should cut + Kant van de rand die het gereedschap moet snijden + + + + Make True, if using Cutter Radius Compensation + Zet Waar indien u gebruik maakt van de straalcompensatie van de snijder @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Graveer operaties - - - - 3D Operations - 3D-bewerkingen - - - - Project Setup - Projectinstelling - - - - Tool Commands - Gereedschapscommando's - - - - New Operations - Nieuwe bewerkingen - - - - Path Modification - Padwijziging - - - - Helpful Tools - Nuttig gereedschap - - - - &Path - &Pad - - - - Path Dressup - Padverkleding - - - - Supplemental Commands - Aanvullende commando's - - - - Unable to create path for face(s). - Kan geen pad aanmaken voor het vlak/de vlakken. - - - - Face appears misaligned after initial rotation. - Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. - - - - Multiple faces in Base Geometry. - Meerdere vlakken in de basisgeometrie. - - - - Depth settings will be applied to all faces. - Diepte-instellingen zullen op alle vlakken toegepast worden. - - - - EnableRotation property is 'Off'. - EnableRotation-eigenschap is 'Uit'. - - - - Rotated to inverse angle. - Gedraaid naar de omgekeerde hoek. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Geselecteerde functie(s) vereist/vereisen 'Rotatie inschakelen: A(x)' voor toegang. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Geselecteerde functie(s) vereist/vereisen 'Rotatie inschakelen: B(y)' voor toegang. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is gebaseerd op geextrudeerd oppervlak. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>De bodem van de uitsparing kan niet-planair zijn en/of niet normaal zijn voor de spindelas. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D-uitsparingsbodem is NIET beschikbaar in deze bewerking</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Probeer de InverseAngle-eigenschap in/uit te schakelen en de operatie te herberekenen. - - - - Processing subs individually ... - Individuele verwerking van subs ... - - - - Depth Warning - Diepte waarschuwing - - - - Verify final depth of pocket shaped by vertical faces. - Controleer de einddiepte van de uitsparing gevormd door verticale vlakken. - - - - Processing model as a whole ... - Verwerking van het model in zijn geheel ... - - - - Can not identify loop. - Kan de lus niet identificeren. - Edit Bewerken - - Heights - Hoogtes + + %s is not a Base Model object of the job %s + %s is geen basismodelsobject van de taak %s - - AreaOp Operation - AreaOp bewerking + + Base shape %s already in the list + Basisvorm %s is al in de lijst - - Uncreate AreaOp Operation - AreaOp bewerking ongedaan maken + + Ignoring vertex + Negeer eindpunt - - Pick Start Point - Kies het startpunt + + Didn't find job %s + Taak %s niet gevonden + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <90° zijn + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Snijhoek rand (%.2f) resulteert in negatieve tool tip lengte @@ -1133,19 +1005,127 @@ Basisobject %s.%s afgewezen door bewerking - - %s is not a Base Model object of the job %s - %s is geen basismodelsobject van de taak %s + + Heights + Hoogtes - - Base shape %s already in the list - Basisvorm %s is al in de lijst + + AreaOp Operation + AreaOp bewerking - - Ignoring vertex - Negeer eindpunt + + Uncreate AreaOp Operation + AreaOp bewerking ongedaan maken + + + + Pick Start Point + Kies het startpunt + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is gebaseerd op geextrudeerd oppervlak. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>De bodem van de uitsparing kan niet-planair zijn en/of niet normaal zijn voor de spindelas. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D-uitsparingsbodem is NIET beschikbaar in deze bewerking</i>. + + + + Face appears misaligned after initial rotation. + Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. + + + + Multiple faces in Base Geometry. + Meerdere vlakken in de basisgeometrie. + + + + Depth settings will be applied to all faces. + Diepte-instellingen zullen op alle vlakken toegepast worden. + + + + EnableRotation property is 'Off'. + EnableRotation-eigenschap is 'Uit'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Probeer de InverseAngle-eigenschap in/uit te schakelen en de operatie te herberekenen. + + + + Processing subs individually ... + Individuele verwerking van subs ... + + + + Depth Warning + Diepte waarschuwing + + + + Verify final depth of pocket shaped by vertical faces. + Controleer de einddiepte van de uitsparing gevormd door verticale vlakken. + + + + Processing model as a whole ... + Verwerking van het model in zijn geheel ... + + + + Can not identify loop. + Kan de lus niet identificeren. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Een planaire, adaptieve start is niet beschikbaar. De niet-planaire zal worden geprobeerd. + + + + The non-planar adaptive start is also unavailable. + De niet-planaire adaptieve start is ook niet beschikbaar. + + + + Rotated to inverse angle. + Gedraaid naar de omgekeerde hoek. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Geselecteerde functie(s) vereist/vereisen 'Rotatie inschakelen: A(x)' voor toegang. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Geselecteerde functie(s) vereist/vereisen 'Rotatie inschakelen: B(y)' voor toegang. @@ -1173,39 +1153,59 @@ Selecteer altijd de onderrand van het gat bij gebruik van een rand. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Een planaire, adaptieve start is niet beschikbaar. De niet-planaire zal worden geprobeerd. + + Unable to create path for face(s). + Kan geen pad aanmaken voor het vlak/de vlakken. - - The non-planar adaptive start is also unavailable. - De niet-planaire adaptieve start is ook niet beschikbaar. + + Engraving Operations + Graveer operaties - - Didn't find job %s - Taak %s niet gevonden + + 3D Operations + 3D-bewerkingen - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <90° zijn + + Project Setup + Projectinstelling - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + + Tool Commands + Gereedschapscommando's - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + + New Operations + Nieuwe bewerkingen - - Cutting Edge Angle (%.2f) results in negative tool tip length - Snijhoek rand (%.2f) resulteert in negatieve tool tip lengte + + Path Modification + Padwijziging + + + + Helpful Tools + Nuttig gereedschap + + + + &Path + &Pad + + + + Path Dressup + Padverkleding + + + + Supplemental Commands + Aanvullende commando's @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Extra te graveren basisobjecten - - - - The vertex index to start the path from - De eindpuntindex vanaf waar het pad moet worden gestart - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Maakt een graveerpad rond een ShapeString-schets + + + Additional base objects to be engraved + Extra te graveren basisobjecten + + + + The vertex index to start the path from + De eindpuntindex vanaf waar het pad moet worden gestart + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s heeft geen eigenschap %s (%s)) - Cannot find property %s of %s Kan eigenschap %s van %s niet vinden + + + %s has no property %s (%s)) + %s heeft geen eigenschap %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Schroef + + + + Creates a Path Helix object from a features of a base object + Maakt een padhelixobject aan uit een eigenschap van een basisobject + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Startstraal - - - Helix - Schroef - - - - Creates a Path Helix object from a features of a base object - Maakt een padhelixobject aan uit een eigenschap van een basisobject - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Stockobject %s niet ondersteund + + + + Unsupported stock type %s (%d) + Stocktype %s (%d) niet ondersteund + + + + Stock not from Base bound box! + Stock niet uit de doos gebonden aan de basis! + + + + Stock not a box! + Stock is geen doos! + + + + Stock not a cylinder! + Stock is geen cilinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s PathJob-sjabloonversie %s niet ondersteund - - - Unsupported stock object %s - Stockobject %s niet ondersteund - - - - Unsupported stock type %s (%d) - Stocktype %s (%d) niet ondersteund - - - - Stock not from Base bound box! - Stock niet uit de doos gebonden aan de basis! - - - - Stock not a box! - Stock is geen doos! - - - - Stock not a cylinder! - Stock is geen cilinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Schatting van de Taak CyclusTijd - - - - Operations Cycle Time Estimation - Schatting van de operatiecyclustijd - - - - Base Geometry - Basisgeometrie - - - - Base Location - Basislocatie - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth kan niet worden aangepast voor deze bewerking. -Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bewerking. - - - - Depths - Diepten - - - - Operation - Bewerking - The base geometry for this operation @@ -1751,6 +1714,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew User Assigned Label Door de gebruiker toegewezen label + + + Operations Cycle Time Estimation + Schatting van de operatiecyclustijd + Base locations for this operation @@ -1816,6 +1784,38 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Coolant option for this operation Koeloptie voor deze bewerking + + + Base Geometry + Basisgeometrie + + + + Base Location + Basislocatie + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth kan niet worden aangepast voor deze bewerking. +Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bewerking. + + + + Depths + Diepten + + + + Operation + Bewerking + + + + Job Cycle Time Estimation + Schatting van de Taak CyclusTijd + PathOpGui @@ -1828,19 +1828,14 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathPocket - - Choose how to process multiple Base Geometry features. - Kies hoe u meerdere Basisgeometriekenmerken verwerkt. + + 3D Pocket + 3D-uitsparing - - Pass Extension - Passextensie - - - - The distance the facing operation will extend beyond the boundary shape. - De afstand die de bekledingsoperatie inneemt, strekt zich uit tot buiten de grenzen van de vorm. + + Creates a Path 3D Pocket object from a face or faces + Maakt een 3D-uitsparingsobject van een pad aan vanuit een of meerdere vlakken @@ -1858,14 +1853,29 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Verticale vlakken vormen geen lus - negeren - - 3D Pocket - 3D-uitsparing + + Adaptive clearing and profiling + Adaptieve ontruiming en profilering - - Creates a Path 3D Pocket object from a face or faces - Maakt een 3D-uitsparingsobject van een pad aan vanuit een of meerdere vlakken + + Pass Extension + Passextensie + + + + The distance the facing operation will extend beyond the boundary shape. + De afstand die de bekledingsoperatie inneemt, strekt zich uit tot buiten de grenzen van de vorm. + + + + Choose how to process multiple Base Geometry features. + Kies hoe u meerdere Basisgeometriekenmerken verwerkt. + + + + Final depth set below ZMin of face(s) selected. + Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd. @@ -1892,16 +1902,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Pocket object from a face or faces Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken - - - Adaptive clearing and profiling - Adaptieve ontruiming en profilering - - - - Final depth set below ZMin of face(s) selected. - Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathProfile + + + Profile based on face or faces + Profiel gebaseerd op één of meerdere vlakken + Profile @@ -2020,11 +2025,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profiel gebaseerd op één of meerdere vlakken - Edge Profile @@ -2435,26 +2435,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew No scan data to convert to Gcode. Geen scangegevens om naar Gcode te converteren. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathToolBit - - - Create Tool - Gereedschap aanmaken - - - - Creates a new ToolBit object - Nieuw ToolBit-object aanmaken - - - - Save Tool as... - Gereedschap opslaan als... - - - - Save Tool - Gereedschap opslaan - - - - Save an existing ToolBit object to a file - Een bestaand ToolBit-object opslaan naar een bestand - - - - Load Tool - Laad Gereedschap - - - - Load an existing ToolBit object from a file - Laad een bestaand ToolBit-object uit een bestand - - - - Edit ToolBit - ToolBit bewerken - - - - Uncreate ToolBit - ToolBit niet aanmaken - - - - Create ToolBit - ToolBit aanmaken - Shape for bit shape @@ -2764,6 +2714,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Chipload as per manufacturer Spaanlading volgens fabrikant + + + Edit ToolBit + ToolBit bewerken + + + + Uncreate ToolBit + ToolBit niet aanmaken + + + + Create ToolBit + ToolBit aanmaken + + + + Create Tool + Gereedschap aanmaken + + + + Creates a new ToolBit object + Nieuw ToolBit-object aanmaken + + + + Save Tool as... + Gereedschap opslaan als... + + + + Save Tool + Gereedschap opslaan + + + + Save an existing ToolBit object to a file + Een bestaand ToolBit-object opslaan naar een bestand + + + + Load Tool + Laad Gereedschap + + + + Load an existing ToolBit object from a file + Laad een bestaand ToolBit-object uit een bestand + PathToolBitLibrary @@ -2790,6 +2790,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathToolController + + + Error updating TC: %s + Fout bij het updaten van TC: %s + The active tool @@ -2840,11 +2845,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew The tool used by this controller Het gereedschap dat door deze regelaar wordt gebruikt - - - Error updating TC: %s - Fout bij het updaten van TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_DressupPathBoundary - - - The base path to modify - Het te wijzigen basistraject - - - - Solid object to be used to limit the generated Path. - Solide object om het gegenereerde pad te beperken. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Bepaalt of de grens een inclusie- of uitsluitingsmasker beschrijft. - - - - The selected object is not a path - Het geselecteerde object is geen pad - Create a Boundary dressup @@ -3273,6 +3253,26 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Path Boundary Dress-up Padgrensverkleding aanmaken + + + The base path to modify + Het te wijzigen basistraject + + + + Solid object to be used to limit the generated Path. + Solide object om het gegenereerde pad te beperken. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Bepaalt of de grens een inclusie- of uitsluitingsmasker beschrijft. + + + + The selected object is not a path + Het geselecteerde object is geen pad + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_DressupTag - - - Cannot copy tags - internal error - Tags kunnen niet worden gekopieerd - interne fout - - - - Create a Tag dressup - Tagverkleding aanmaken - - - - Tag Dress-up - Tagverkleding - - - - Creates a Tag Dress-up object from a selected path - Maakt een tagverkledingsobject vanaf een geselecteerd pad - - - - Please select one path object - Gelieve een padobject te selecteren - - - - Create Tag Dress-up - Tagverkleding aanmaken - - - - Holding Tag - Bevestigingslip - The base path to modify @@ -3374,6 +3339,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Factor determining the # of segments used to approximate rounded tags. Factor die de # segmenten bepaalt die gebruikt worden om afgeronde tags te schatten. + + + Cannot insert holding tags for this path - please select a Profile path + Kan geen bevestigingslippen invoegen voor dit pad - gelieve een profielpad te selecteren + + + + The selected object is not a path + Het geselecteerde object is geen pad + + + + Please select a Profile object + Gelieve een profielobject te selecteren + + + + Holding Tag + Bevestigingslip + + + + Cannot copy tags - internal error + Tags kunnen niet worden gekopieerd - interne fout + + + + Create a Tag dressup + Tagverkleding aanmaken + + + + Tag Dress-up + Tagverkleding + + + + Creates a Tag Dress-up object from a selected path + Maakt een tagverkledingsobject vanaf een geselecteerd pad + + + + Please select one path object + Gelieve een padobject te selecteren + + + + Create Tag Dress-up + Tagverkleding aanmaken + No Base object found. @@ -3394,21 +3409,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Base Path is empty. Basistraject is leeg. - - - The selected object is not a path - Het geselecteerde object is geen pad - - - - Please select a Profile object - Gelieve een profielobject te selecteren - - - - Cannot insert holding tags for this path - please select a Profile path - Kan geen bevestigingslippen invoegen voor dit pad - gelieve een profielpad te selecteren - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Job + + + Job + Taak + + + + Creates a Path Job object + Maakt een padtaakobject aan + + + + Export Template + Sjabloon exporteren + + + + Exports Path Job as a template to be used for other jobs + Exporteert padtaak als sjabloon voor andere taken + + + + Create Job + Taak aanmaken + Edit Job @@ -3554,31 +3579,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Model Selection Modelselectie - - - Create Job - Taak aanmaken - - - - Job - Taak - - - - Creates a Path Job object - Maakt een padtaakobject aan - - - - Export Template - Sjabloon exporteren - - - - Exports Path Job as a template to be used for other jobs - Exporteert padtaak als sjabloon voor andere taken - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Probe - - Select Output File - Selecteer uitvoerbestand + + Select Probe Point File + Selecteer Sondeerpuntbestand @@ -3648,9 +3648,9 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Alle bestanden (*.*) - - Select Probe Point File - Selecteer Sondeerpuntbestand + + Select Output File + Selecteer uitvoerbestand diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.qm b/src/Mod/Path/Gui/Resources/translations/Path_no.qm index a5f086bc77..69320d56e1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_no.qm and b/src/Mod/Path/Gui/Resources/translations/Path_no.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.ts b/src/Mod/Path/Gui/Resources/translations/Path_no.ts index 31c2dc2c81..672249ccd6 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_no.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_no.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Rediger - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Heliks + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Heliks - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Alle filer (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm index 9bcf48cfaf..36bda73aa6 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index 72826710f6..64eb3b7cb6 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Dodaj opcjonalne lub obowiązkowe zatrzymanie programu - - - - The base object this collision refers to - Obiekt bazowy, do którego odnosi się ta kolizja - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Sposob, w który narzędzia poruszaną się w okół krawędzi. Domyślny=okrągły - - - - Maximum distance before a miter join is truncated - Maksymalny dystans pomiędzy stycznymi ukosu jest kadłubowy - - - - The base geometry of this toolpath - Podstawowa geometria tej ścieżki narzędzia - - - - Extra value to stay away from final profile- good for roughing toolpath - Dodatkową wartość odległości od końcowego profilu dobra do obróbki zgrubnej - - - - Profile holes as well as the outline - Otwory w profilu, tak samo jak kontury - - - - Profile the outline - Profil konturu - - - - Profile round holes - Profil okrągłych otworów - - - - Side of edge that tool should cut - Strona krawędzi, po której narzędzie powinno pracować - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Odwróć kierunek operacji w kieszonce. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Odwróć kąt. Przykład: -22,5 -> 22,5 stopni. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Obiekt, który ma być osiągnięty przez ten krok - - - - The Z height of the hop - Wysokość skoku w Z - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Wprowadź przykładowy punkt startowy dla ścieżki slotu. - - - - Enter custom end point for slot path. - Wprowadź przykładowy punkt końcowy dla ścieżki slotu. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Wartość dodatnia wydłuża początek ścieżki, wartość ujemna skraca ją. - - - - Positive extends the end of the path, negative shortens. - Wartość dodatnia przedłuża koniec ścieżki, wartość ujemna skraca go. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Upewnij się, że określasz punkt początkowy - - - - Incremental Drill depth before retracting to clear chips - Przyrostowa głębokość wiercenia przed wyjazdem w celu usunięcia wiórów - - - - Enable pecking - Włącz rwanie - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Włącz postoje - - - - Calculate the tip length and subtract from final depth - Oblicz długość końcówki i odejmij od końcowej głębokości - - - - Controls how tool retracts Default=G98 - Kontroluje sposób wycofania narzędzia Domyślnie=G98 - - - - The height where feed starts and height during retract tool when path is finished - Wysokość, na której rozpoczyna się posuw i wysokość podczas wycofywania narzędzia po ukończeniu ścieżki - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Zmiana numeru osprzętu - - - - Make False, to prevent operation from generating code - Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu - - - - Extra offset to apply to the operation. Direction is operation dependent. - Dodatkowy offset do operacji. Kierunek jest zależny od operacji. - - - - Start pocketing at center or boundary - Uruchom obróbke kieszeni w centrum lub obwiedni - - - - Percent of cutter diameter to step over on each pass - Procent średnicy noża do przekroczenia na każdym przejściu - - - - Angle of the zigzag pattern - Kąt do wzoru Zig-Zag - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientację płaszczyzny ścieżki CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -346,7 +76,7 @@ The model will be rotated around this axis. - The model will be rotated around this axis. + Model będzie obracany wokół tej osi. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Upewnij się, że określasz punkt początkowy + The path to be copied Ścieżka do skopiowania + + + The base geometry of this toolpath + Podstawowa geometria tej ścieżki narzędzia + The tool controller that will be used to calculate the path Kontroler, który zostanie użyty do określenia ścieżki - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Wysokość do podniesienia w czasie akcji rogu - - Ramping Method - Metoda rampy + + The object to be reached by this hop + Obiekt, który ma być osiągnięty przez ten krok - - Which feed rate to use for ramping - Jaka prędkość zasilania używana jest do podnoszenia + + The Z height of the hop + Wysokość skoku w Z - - Custom feedrate - Niestandardowy posuw + + X offset between tool and probe + Odsunięcie X między narzędziem a sondą - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Odsunięcie Y między narzędziem a sondą - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Liczba punktów zbieranych sondą w kierunku X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Głębokość, na której włączona jest funkcja dressup dla rampy. Powyżej niej rampy nie są generowane, ale polecenia ruchu są przekazywane tak jak są. + + Number of points to probe in Y direction + Liczba punktów zbieranych sondą w kierunku Y - - Pattern method - Metoda wzoru - - - - Shape to use for calculating Boundary - Kształt wykorzystany do obliczenia granic - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -611,12 +331,12 @@ Extends LeadIn distance - Extends LeadIn distance + Zwiększa dystans podejścia Extends LeadOut distance - Extends LeadOut distance + Zwiększa dystans odejścia @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Zmiana numeru osprzętu + + + + Make False, to prevent operation from generating code + Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu + + + + Ramping Method + Metoda rampy + + + + Which feed rate to use for ramping + Jaka prędkość zasilania używana jest do podnoszenia + + + + Custom feedrate + Niestandardowy posuw + + + + Custom feed rate + Niestandardowy posuw + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Głębokość, na której włączona jest funkcja dressup dla rampy. Powyżej niej rampy nie są generowane, ale polecenia ruchu są przekazywane tak jak są. + + + + Incremental Drill depth before retracting to clear chips + Przyrostowa głębokość wiercenia przed wyjazdem w celu usunięcia wiórów + + + + Enable pecking + Włącz rwanie + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Włącz postoje + + + + Calculate the tip length and subtract from final depth + Oblicz długość końcówki i odejmij od końcowej głębokości + + + + Controls how tool retracts Default=G98 + Kontroluje sposób wycofania narzędzia Domyślnie=G98 + + + + The height where feed starts and height during retract tool when path is finished + Wysokość, na której rozpoczyna się posuw i wysokość podczas wycofywania narzędzia po ukończeniu ścieżki + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Odwróć kierunek operacji w kieszonce. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Odwróć kąt. Przykład: -22,5 -> 22,5 stopni. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientację płaszczyzny ścieżki CNC + + + + Shape to use for calculating Boundary + Kształt wykorzystany do obliczenia granic + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Obiekt bazowy, do którego odnosi się ta kolizja + + + + Enter custom start point for slot path. + Wprowadź przykładowy punkt startowy dla ścieżki slotu. + + + + Enter custom end point for slot path. + Wprowadź przykładowy punkt końcowy dla ścieżki slotu. + + + + Positive extends the beginning of the path, negative shortens. + Wartość dodatnia wydłuża początek ścieżki, wartość ujemna skraca ją. + + + + Positive extends the end of the path, negative shortens. + Wartość dodatnia przedłuża koniec ścieżki, wartość ujemna skraca go. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Kierunek w którym narzędzie porusza się po ścieżce wokół części, zgodnie (CW) lub przeciwnie (CCW) do ruchu wskazówek zegara - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Dodatkowy offset do operacji. Kierunek jest zależny od operacji. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Uruchom obróbke kieszeni w centrum lub obwiedni - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Procent średnicy noża do przekroczenia na każdym przejściu - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Kąt do wzoru Zig-Zag + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Dodaj opcjonalne lub obowiązkowe zatrzymanie programu + + + + Pattern method + Metoda wzoru + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Sposob, w który narzędzia poruszaną się w okół krawędzi. Domyślny=okrągły + + + + Maximum distance before a miter join is truncated + Maksymalny dystans pomiędzy stycznymi ukosu jest kadłubowy + + + + Extra value to stay away from final profile- good for roughing toolpath + Dodatkową wartość odległości od końcowego profilu dobra do obróbki zgrubnej + + + + Profile holes as well as the outline + Otwory w profilu, tak samo jak kontury + + + + Profile the outline + Profil konturu + + + + Profile round holes + Profil okrągłych otworów + + + + Side of edge that tool should cut + Strona krawędzi, po której narzędzie powinno pracować + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -806,22 +806,22 @@ The base geometry for this operation - Podstawa geometryczna do tej operacji + Podstawowa geometria dla tej operacji Base locations for this operation - Podstawowa lokacja do tej operacji + Lokalizacje bazowe dla tej operacji extra allowance from part width - dodatkowy przydział z częściowej szerokości + dodatkowy naddatek od szerokości części Extra allowance from part width - Dodatkowy przydział z częściowej szerokości + Dodatkowy naddatek od szerokości części @@ -856,7 +856,7 @@ Extra value to stay away from final Contour- good for roughing toolpath - Odległość od konturu końcowego- dobra dla zgrubnej obróbki + Dodatkowa wartość pozwalająca trzymać się z dala od końcowego konturu - dobra do obróbki zgrubnej ścieżki narzędzia @@ -871,7 +871,7 @@ The height to travel at between loops - Wysokość do przebycia pomiędzy pętlami + Wysokość przejazdu między pętlami @@ -894,6 +894,269 @@ Path + + + Edit + Edytuj + + + + %s is not a Base Model object of the job %s + %s nie jest obiektem modelu podstawowego zadania %s + + + + Base shape %s already in the list + Base shape %s already in the list + + + + Ignoring vertex + Ignorowanie wierzchołka + + + + Didn't find job %s + Nie znaleziono zadania %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Nieprawidłowy przecinacz krawędzi %.2f, must be <90• and >=• + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Przecinacz krawędzi (%.2f) skutkuje nieprawidłowym narzędziem długości koncówki + + + + No parent job found for operation. + Nie znaleziono zadania nadrzędnego dla operacji. + + + + Parent job %s doesn't have a base object + Nadrzędne zadanie %s nie posiada podstawowego obiektu + + + + No coolant property found. Please recreate operation. + Nie znaleziono właściwości chłodziwa. Proszę odtworzyć operację. + + + + No Tool Controller is selected. We need a tool to build a Path. + Nie wybrano kontrolera narzędzi. Do zbudowania ścieżki potrzebne jest narzędzie. + + + + No Tool found or diameter is zero. We need a tool to build a Path. + Nie znaleziono narzędzia lub jego średnica wynosi zero. Do zbudowania ścieżki potrzebne jest narzędzie. + + + + No Tool Controller selected. + Nie wybrano kontrolera narzędzia. + + + + Tool Error + Błąd narzędzia + + + + Tool Controller feedrates required to calculate the cycle time. + Wymagana prędkości posuwów narzędza do obliczenia czasu cyklu. + + + + Feedrate Error + Feedrate Error + + + + Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. + Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. + + + + Cycletime Error + Cycletime Error + + + + Base object %s.%s already in the list + Obiekt podstawowy %s.%s jest już na liście + + + + Base object %s.%s rejected by operation + Base object %s.%s rejected by operation + + + + Heights + Wysokości + + + + AreaOp Operation + Operacja AreaOp + + + + Uncreate AreaOp Operation + Nieistniejąca operacja AreaOp + + + + Pick Start Point + Wybierz punkt początkowy + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + Właściwość Zezwól na obrót jest wyłączona. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Nie można zidentyfikować pętli. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Obróć w przeciwną stronę. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. + + + + List of disabled features + Lista wyłączonych funkcji + + + + Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + + + + Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + Funkcja %s.%s nie może być przetworzona jako okrągły otwór - proszę usunąć ją z listy bazy geometrycznej. + + + + Rotated to 'InverseAngle' to attempt access. + Rotated to 'InverseAngle' to attempt access. + + + + Always select the bottom edge of the hole when using an edge. + Always select the bottom edge of the hole when using an edge. + + + + Unable to create path for face(s). + Unable to create path for face(s). + Engraving Operations @@ -942,270 +1205,7 @@ Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - - - - Edit - Edytuj - - - - Heights - Wysokości - - - - AreaOp Operation - Operacja AreaOp - - - - Uncreate AreaOp Operation - Nieistniejąca operacja AreaOp - - - - Pick Start Point - Wybierz punkt początkowy - - - - No parent job found for operation. - Nie znaleziono nadrzędnych zadań dla operacji. - - - - Parent job %s doesn't have a base object - Nadrzędne zadanie %s nie posiada podstawowego obiektu - - - - No coolant property found. Please recreate operation. - Nie znaleziono schładzania. Proszę odtworzyć operację. - - - - No Tool Controller is selected. We need a tool to build a Path. - No Tool Controller is selected. We need a tool to build a Path. - - - - No Tool found or diameter is zero. We need a tool to build a Path. - No Tool found or diameter is zero. We need a tool to build a Path. - - - - No Tool Controller selected. - No Tool Controller selected. - - - - Tool Error - Tool Error - - - - Tool Controller feedrates required to calculate the cycle time. - Tool Controller feedrates required to calculate the cycle time. - - - - Feedrate Error - Feedrate Error - - - - Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. - Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. - - - - Cycletime Error - Cycletime Error - - - - Base object %s.%s already in the list - Base object %s.%s already in the list - - - - Base object %s.%s rejected by operation - Base object %s.%s rejected by operation - - - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s - - - - Base shape %s already in the list - Base shape %s already in the list - - - - Ignoring vertex - Ignoring vertex - - - - List of disabled features - Lista dezaktywowanych funkcji - - - - Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. - Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. - - - - Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - Funkcja %s.%s nie może być przetworzona jako okrągły otwór - proszę usunąć ją z listy bazy geometrycznej. - - - - Rotated to 'InverseAngle' to attempt access. - Rotated to 'InverseAngle' to attempt access. - - - - Always select the bottom edge of the hole when using an edge. - Always select the bottom edge of the hole when using an edge. - - - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. - - - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. - - - - Didn't find job %s - Nie znaleziono zadania %s - - - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Nieprawidłowy przecinacz krawędzi %.2f, must be <90• and >=• - - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - - - - Cutting Edge Angle (%.2f) results in negative tool tip length - Przecinacz krawędzi (%.2f) skutkuje nieprawidłowym narzędziem długości koncówki + Dodatkowe polecenia @@ -1291,12 +1291,12 @@ How to join chamfer segments - How to join chamfer segments + Jak połączyć fazowane segmenty Direction of Operation - Direction of Operation + Kierunek działania @@ -1389,6 +1389,16 @@ PathEngrave + + + Engrave + Grawerowanie + + + + Creates an Engraving Path around a Draft ShapeString + Tworzy ścieżkę grawerowania wokół Draft ShapeString + Additional base objects to be engraved @@ -1399,16 +1409,6 @@ The vertex index to start the path from Indeks wierzchołka, od którego można rozpocząć trajektorię - - - Engrave - Grawerować - - - - Creates an Engraving Path around a Draft ShapeString - Tworzy ścieżkę grawerowania wokół Draft ShapeString - PathFace @@ -1465,20 +1465,20 @@ PathGui - - - %s has no property %s (%s)) - %s nie ma własności %s (%s)) - Cannot find property %s of %s Nie można odnaleźć właściwości %s z %s + + + %s has no property %s (%s)) + %s nie ma własności %s (%s)) + Tool Error - Tool Error + Błąd narzędzia @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Helisa + + + + Creates a Path Helix object from a features of a base object + Tworzy obiekt Path Helix z funkcji obiektu bazowego + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1511,17 +1521,7 @@ Starting Radius - Starting Radius - - - - Helix - Helisa - - - - Creates a Path Helix object from a features of a base object - Tworzy obiekt Path Helix z funkcji obiektu bazowego + Promień początkowy @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Nieobsługiwany obiekt zapasu %s + + + + Unsupported stock type %s (%d) + Nieobsługiwany typ zapasów %s (%d) + + + + Stock not from Base bound box! + Zapas nie pochodzi z podstawowej bryły brzegowej! + + + + Stock not a box! + Zapasy nie pudełko! + + + + Stock not a cylinder! + Zapas nie jest walcem! + The NC output file for this project @@ -1549,7 +1574,7 @@ An optional description for this job - An optional description for this job + Opcjonalny opis tego zadania @@ -1584,7 +1609,7 @@ The Work Coordinate Systems for the Job - The Work Coordinate Systems for the Job + Roboczy układ współrzędnych dla zadania @@ -1594,38 +1619,13 @@ The base objects for all operations - The base objects for all operations + Obiekt bazowy dla wszystkich operacji Unsupported PathJob template version %s Nieobsługiwana wersja szablonu PathJob %s - - - Unsupported stock object %s - Nieobsługiwany obiekt zapasu %s - - - - Unsupported stock type %s (%d) - Nieobsługiwany typ zapasów %s (%d) - - - - Stock not from Base bound box! - Zapas nie pochodzi z podstawowej bryły brzegowej! - - - - Stock not a box! - Zapasy nie pudełko! - - - - Stock not a cylinder! - Zapas nie jest walcem! - Solids @@ -1669,47 +1669,10 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Geometria podstawowa - - - - Base Location - Podstawowa lokalizacja - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Głębia - - - - Operation - Operation - The base geometry for this operation - Podstawa geometryczna do tej operacji + Podstawowa geometria dla tej operacji @@ -1751,10 +1714,15 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Etykieta przypisana przez użytkownika + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation - Podstawowa lokacja do tej operacji + Lokalizacje bazowe dla tej operacji @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Geometria podstawowa + + + + Base Location + Podstawowa lokalizacja + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Głębia + + + + Operation + Operacja + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + kieszeń 3D - - Pass Extension - Rozszwrzenia pass - - - - The distance the facing operation will extend beyond the boundary shape. - Odległość, na jaką skierowana jest operacja, przekroczy granicę kształtu. + + Creates a Path 3D Pocket object from a face or faces + Tworzy obiekt Kieszeniowy 3D ścieżki z twarzy lub twarzy @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Pionowe ściany nie tworzą pętli - ignoruj - - 3D Pocket - kieszeń 3D + + Adaptive clearing and profiling + Adaptacyjne czyszczenie i profilowanie - - Creates a Path 3D Pocket object from a face or faces - Tworzy obiekt Kieszeniowy 3D ścieżki z twarzy lub twarzy + + Pass Extension + Rozszwrzenia pass + + + + The distance the facing operation will extend beyond the boundary shape. + Odległość, na jaką skierowana jest operacja, przekroczy granicę kształtu. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy - - - Adaptive clearing and profiling - Adaptacyjne czyszczenie i profilowanie - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profil oparty na powierzchni lub powierzchniach + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profil oparty na powierzchni lub powierzchniach - Edge Profile @@ -2189,12 +2189,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant Modes - Coolant Modes + Tryby chłodzenia Default coolant mode. - Default coolant mode. + Domyślny tryb chłodzenia. @@ -2247,7 +2247,7 @@ If it is necessary to set the FinalDepth manually please select a different oper No Base Geometry object in the operation. - No Base Geometry object in the operation. + Brak podstawowego obiektu geometrii w operacji. @@ -2257,7 +2257,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Current offset value is not possible. - Current offset value is not possible. + Obecna wartość odsunięcia nie jest możliwa. @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Nie udało się zidentyfikować narzędzia do pracy. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2478,7 +2458,7 @@ If it is necessary to set the FinalDepth manually please select a different oper The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + TolerancjaGeometrii dla tego zadania wynosi 0.0. @@ -2518,7 +2498,7 @@ If it is necessary to set the FinalDepth manually please select a different oper No JOB - No JOB + Brak zadania @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. Brak możliwości skanowania danych do konwersji na Gcode. + + + Failed to identify tool for operation. + Nie udało się zidentyfikować narzędzia do pracy. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Utwórz narzędzie + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Zapisz narzędzie jako... + + + + Save Tool + Zapisz narzędzie + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Wczytaj narzędzie + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Błąd podczas aktualizacji TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Narzędzie wykorzystane przez ten kontroler - - - Error updating TC: %s - Błąd podczas aktualizacji TC: %s - PathToolLibraryManager @@ -2899,7 +2899,7 @@ If it is necessary to set the FinalDepth manually please select a different oper User Defined Values - User Defined Values + Wartości zdefiniowane przez użytkownika @@ -2935,7 +2935,7 @@ If it is necessary to set the FinalDepth manually please select a different oper The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + TolerancjaGeometrii dla tego zadania wynosi 0.0. @@ -2970,7 +2970,7 @@ If it is necessary to set the FinalDepth manually please select a different oper No JOB - No JOB + Brak zadania @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Ścieżka bazowa do modyfikacji - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Wybrany obiekt nie jest ścieżką - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Ścieżka bazowa do modyfikacji + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Wybrany obiekt nie jest ścieżką + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Utwórz dressup etykiety - - - - Tag Dress-up - Dress-up etykiety - - - - Creates a Tag Dress-up object from a selected path - Tworzy obiekt Dress-up etykiety z wybranej ścieżki - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Tworzy Dress-up etykiety - - - - Holding Tag - Mostek technologiczny - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + Wybrany obiekt nie jest ścieżką + + + + Please select a Profile object + Proszę wybrać profil obiektu + + + + Holding Tag + Mostek technologiczny + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Utwórz dressup etykiety + + + + Tag Dress-up + Dress-up etykiety + + + + Creates a Tag Dress-up object from a selected path + Tworzy obiekt Dress-up etykiety z wybranej ścieżki + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Tworzy Dress-up etykiety + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Baza ścieżki jest pusta. - - - The selected object is not a path - Wybrany obiekt nie jest ścieżką - - - - Please select a Profile object - Proszę wybrać profil obiektu - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Zadanie + + + + Creates a Path Job object + Tworzy obiekt zadania ścieżki + + + + Export Template + Eksport szablonu + + + + Exports Path Job as a template to be used for other jobs + Eksportuje zadanie ścieżki jako szablon do użycia w innych zadaniach + + + + Create Job + Utwórz zadanie + Edit Job @@ -3552,32 +3577,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection - Model Selection - - - - Create Job - Utwórz zadanie - - - - Job - Zadanie - - - - Creates a Path Job object - Tworzy obiekt zadania ścieżki - - - - Export Template - Eksport szablonu - - - - Exports Path Job as a template to be used for other jobs - Eksportuje zadanie ścieżki jako szablon do użycia w innych zadaniach + Wybór modelu @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Wybierz plik wyjściowy + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Wszystkie pliki (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Wybierz plik wyjściowy @@ -3820,7 +3820,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Probe - Probe + Sonda @@ -3864,7 +3864,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Enter Name: - Enter Name: + Wprowadź nazwę: @@ -5029,7 +5029,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Extra allowance from part width - Dodatkowy przydział z częściowej szerokości + Dodatkowy naddatek od szerokości części @@ -5058,7 +5058,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Extra allowance from part width - Dodatkowy przydział z częściowej szerokości + Dodatkowy naddatek od szerokości części @@ -5475,7 +5475,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Extra allowance from part width - Dodatkowy przydział z częściowej szerokości + Dodatkowy naddatek od szerokości części diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm index ad8adbd41c..28b87dfc42 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index f4c5f0faf2..7d8193f411 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Adicionar parada opcional ou obrigatória ao programa - - - - The base object this collision refers to - O objeto base a que esta colisão se refere - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controla como a ferramenta se move nos cantos. Padrão=Redondo(boleado) - - - - Maximum distance before a miter join is truncated - Distancia máxima antes de que uma junta a meia-esquadria ser cortada - - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor extra para ficar longe do perfil final - bom para caminho de ferramenta de desbaste - - - - Profile holes as well as the outline - Perfilar furos e contorno - - - - Profile the outline - Perfilar contorno - - - - Profile round holes - Perfilar furos redondos - - - - Side of edge that tool should cut - Lado da borda que a ferramenta deve cortar - - - - Make True, if using Cutter Radius Compensation - Torne verdadeiro, se está usando a compensação do raio do cortador - - - - Reverse direction of pocket operation. - Inverter direção da operação de escavação. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverter o ângulo. Exemplo: -22.5 -> 22.5 graus. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - O objeto a ser alcançada por este salto - - - - The Z height of the hop - A altura de Z para o salto - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Verdadeiro, especificando um ponto de partida - - - - Incremental Drill depth before retracting to clear chips - Profundidade incremental da fresa antes da saída para limpeza dos cavacos - - - - Enable pecking - Ativar dobragem - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Habilitar espera - - - - Calculate the tip length and subtract from final depth - Calcule o comprimento da ponta e subtraia da profundidade final - - - - Controls how tool retracts Default=G98 - Controla como a ferramenta recua Padrão=G98 - - - - The height where feed starts and height during retract tool when path is finished - A altura inicial da projeção e altura durante a retração final da extensão - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Offset de fixação - - - - Make False, to prevent operation from generating code - Falso, para impedir a operação de geração de código - - - - Extra offset to apply to the operation. Direction is operation dependent. - Deslocamento extra a ser aplicado à operação. A direção depende da operação. - - - - Start pocketing at center or boundary - Começar a embolsar(pocket) no centro ou o na borda - - - - Percent of cutter diameter to step over on each pass - Percentagem do diâmetro da fresa para sobrepor a cada passagem - - - - Angle of the zigzag pattern - Ângulo do padrão em zigue-zague - - - - Clearing pattern to use - Limpando padrão para usar - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Plano de orientação do caminho do CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Verdadeiro, especificando um ponto de partida + The path to be copied O caminho a ser copiado + + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta + The tool controller that will be used to calculate the path O controlador de ferramenta que será usado para calcular a trajetória - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Altura a subir durante a ação de canto - - Ramping Method - Método de subida + + The object to be reached by this hop + O objeto a ser alcançada por este salto - - Which feed rate to use for ramping - Qual a taxa a usar para a rampa de avanço + + The Z height of the hop + A altura de Z para o salto - - Custom feedrate - Velocidade de avanço personalizada + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Método de geração do padrão (trama) - - - - Shape to use for calculating Boundary - Forma a ser usada para calcular o limite - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Offset de fixação + + + + Make False, to prevent operation from generating code + Falso, para impedir a operação de geração de código + + + + Ramping Method + Método de subida + + + + Which feed rate to use for ramping + Qual a taxa a usar para a rampa de avanço + + + + Custom feedrate + Velocidade de avanço personalizada + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Profundidade incremental da fresa antes da saída para limpeza dos cavacos + + + + Enable pecking + Ativar dobragem + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Habilitar espera + + + + Calculate the tip length and subtract from final depth + Calcule o comprimento da ponta e subtraia da profundidade final + + + + Controls how tool retracts Default=G98 + Controla como a ferramenta recua Padrão=G98 + + + + The height where feed starts and height during retract tool when path is finished + A altura inicial da projeção e altura durante a retração final da extensão + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Inverter direção da operação de escavação. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverter o ângulo. Exemplo: -22.5 -> 22.5 graus. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Plano de orientação do caminho do CNC + + + + Shape to use for calculating Boundary + Forma a ser usada para calcular o limite + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + O objeto base a que esta colisão se refere + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Deslocamento extra a ser aplicado à operação. A direção depende da operação. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Começar a embolsar(pocket) no centro ou o na borda - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percentagem do diâmetro da fresa para sobrepor a cada passagem - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Ângulo do padrão em zigue-zague + + + + Clearing pattern to use + Limpando padrão para usar + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Adicionar parada opcional ou obrigatória ao programa + + + + Pattern method + Método de geração do padrão (trama) + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controla como a ferramenta se move nos cantos. Padrão=Redondo(boleado) + + + + Maximum distance before a miter join is truncated + Distancia máxima antes de que uma junta a meia-esquadria ser cortada + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor extra para ficar longe do perfil final - bom para caminho de ferramenta de desbaste + + + + Profile holes as well as the outline + Perfilar furos e contorno + + + + Profile the outline + Perfilar contorno + + + + Profile round holes + Perfilar furos redondos + + + + Side of edge that tool should cut + Lado da borda que a ferramenta deve cortar + + + + Make True, if using Cutter Radius Compensation + Torne verdadeiro, se está usando a compensação do raio do cortador @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operação de gravura - - - - 3D Operations - Operações 3D - - - - Project Setup - Configurações do Projeto - - - - Tool Commands - Comandos da ferramenta - - - - New Operations - Novas Operações - - - - Path Modification - Modificação de trajetória - - - - Helpful Tools - Ferramentas úteis - - - - &Path - &Trajetória - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Não foi possível criar o caminho para face(s). - - - - Face appears misaligned after initial rotation. - A face parece desalinhada após a rotação inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar a propriedade 'InverseAngle' e recalcular. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Configurações de profundidade serão aplicadas a todas as faces. - - - - EnableRotation property is 'Off'. - A propriedade HabilitarRotação está 'Desligada'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Cavidade é baseada em superfície extrudada. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Fundo da cavidade pode ser não-planar e/ou não ser normal ao eixo do fuso. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>fundo da cavidade 3D NÃO está disponível nesta operação</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Considere alternar a propriedade ÂnguloInverso e recalcule a operação. - - - - Processing subs individually ... - Processando subs individualmente... - - - - Depth Warning - Aviso de Profundidade - - - - Verify final depth of pocket shaped by vertical faces. - Verificar a profundidade final da cavidade pelas faces verticais. - - - - Processing model as a whole ... - Processando modelo como um todo... - - - - Can not identify loop. - Não é possível identificar laço. - Edit Editar - - Heights - Alturas + + %s is not a Base Model object of the job %s + %s não é um objeto modelo de base do trabalho %s - - AreaOp Operation - Operação AreaOp + + Base shape %s already in the list + Forma base %s já está na lista - - Uncreate AreaOp Operation - Elimina Operação de AreaOp + + Ignoring vertex + Ignorando o vértice - - Pick Start Point - Escolher Ponto Inicial + + Didn't find job %s + Trabalho %s não encontrado + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Ângulo de corte de esquina %.2f inválido, deve ser <90º e >=0º + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s não é um objeto modelo de base do trabalho %s + + Heights + Alturas - - Base shape %s already in the list - Forma base %s já está na lista + + AreaOp Operation + Operação AreaOp - - Ignoring vertex - Ignorando o vértice + + Uncreate AreaOp Operation + Elimina Operação de AreaOp + + + + Pick Start Point + Escolher Ponto Inicial + + + + +<br>Pocket is based on extruded surface. + +<br>Cavidade é baseada em superfície extrudada. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Fundo da cavidade pode ser não-planar e/ou não ser normal ao eixo do fuso. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>fundo da cavidade 3D NÃO está disponível nesta operação</i>. + + + + Face appears misaligned after initial rotation. + A face parece desalinhada após a rotação inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar a propriedade 'InverseAngle' e recalcular. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Configurações de profundidade serão aplicadas a todas as faces. + + + + EnableRotation property is 'Off'. + A propriedade HabilitarRotação está 'Desligada'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Considere alternar a propriedade ÂnguloInverso e recalcule a operação. + + + + Processing subs individually ... + Processando subs individualmente... + + + + Depth Warning + Aviso de Profundidade + + + + Verify final depth of pocket shaped by vertical faces. + Verificar a profundidade final da cavidade pelas faces verticais. + + + + Processing model as a whole ... + Processando modelo como um todo... + + + + Can not identify loop. + Não é possível identificar laço. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Não foi possível criar o caminho para face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Operação de gravura - - Didn't find job %s - Trabalho %s não encontrado + + 3D Operations + Operações 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Ângulo de corte de esquina %.2f inválido, deve ser <90º e >=0º + + Project Setup + Configurações do Projeto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Comandos da ferramenta - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º + + New Operations + Novas Operações - - Cutting Edge Angle (%.2f) results in negative tool tip length - Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa + + Path Modification + Modificação de trajetória + + + + Helpful Tools + Ferramentas úteis + + + + &Path + &Trajetória + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Objetos base adicionais a serem gravados - - - - The vertex index to start the path from - O índice de vértice para iniciar o caminho de - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Cria uma trajetória de entalhe em torno de um ShapeString + + + Additional base objects to be engraved + Objetos base adicionais a serem gravados + + + + The vertex index to start the path from + O índice de vértice para iniciar o caminho de + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s Não tem propriedade %s (%s)) - Cannot find property %s of %s Impossível encontrar a propriedade %s de %s + + + %s has no property %s (%s)) + %s Não tem propriedade %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Cria um objeto de trajetória helicoidal a partir dos recursos de um objeto base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Cria um objeto de trajetória helicoidal a partir dos recursos de um objeto base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Tipo de estoque não suportado%s + + + + Unsupported stock type %s (%d) + Tipo de estoque não suportado %s(%d) + + + + Stock not from Base bound box! + O estoque não respeita a caixa delimitadora do objeto base! + + + + Stock not a box! + O estoque não é um paralelipípedo! + + + + Stock not a cylinder! + O estoque não é um cilindro! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Versão de modelo de tarefa não suportada %s - - - Unsupported stock object %s - Tipo de estoque não suportado%s - - - - Unsupported stock type %s (%d) - Tipo de estoque não suportado %s(%d) - - - - Stock not from Base bound box! - O estoque não respeita a caixa delimitadora do objeto base! - - - - Stock not a box! - O estoque não é um paralelipípedo! - - - - Stock not a cylinder! - O estoque não é um cilindro! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Geometria base - - - - Base Location - Posição de base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - A profundidade final (FinalDepth) não pode ser modificada para esta operação. -Se for necessário definir a profundidade final (FinalDepth) manualmente, selecione uma operação diferente. - - - - Depths - Profundidades - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci User Assigned Label Rótulo atribuído pelo utilizador + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Coolant option for this operation Coolant option for this operation + + + Base Geometry + Geometria base + + + + Base Location + Posição de base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + A profundidade final (FinalDepth) não pode ser modificada para esta operação. +Se for necessário definir a profundidade final (FinalDepth) manualmente, selecione uma operação diferente. + + + + Depths + Profundidades + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Bolso 3D - - Pass Extension - Extensão da passada - - - - The distance the facing operation will extend beyond the boundary shape. - A distância que a operação de faciamento se prolongará para além do contorno da forma. + + Creates a Path 3D Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) 3D de uma face ou faces @@ -1858,14 +1853,29 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Faces verticais não formam uma sequência - ignorando - - 3D Pocket - Bolso 3D + + Adaptive clearing and profiling + Limpeza e criação de perfil adaptáveis - - Creates a Path 3D Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) 3D de uma face ou faces + + Pass Extension + Extensão da passada + + + + The distance the facing operation will extend beyond the boundary shape. + A distância que a operação de faciamento se prolongará para além do contorno da forma. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Pocket object from a face or faces Cria uma trajetória de vazio (bolso) de uma face ou faces - - - Adaptive clearing and profiling - Limpeza e criação de perfil adaptáveis - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathProfile + + + Profile based on face or faces + Perfil baseado em face ou faces + Profile @@ -2020,11 +2025,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Perfil baseado em face ou faces - Edge Profile @@ -2435,26 +2435,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathToolController + + + Error updating TC: %s + Erro ao atualizar o TC: %s + The active tool @@ -2840,11 +2845,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci The tool used by this controller A ferramenta usada por este controlador - - - Error updating TC: %s - Erro ao atualizar o TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_DressupPathBoundary - - - The base path to modify - O caminho de base para modificar - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - Create a Boundary dressup @@ -3273,6 +3253,26 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + O caminho de base para modificar + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + O objeto selecionado não é uma trajetória + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Criar etiqueta de trajetória adicional - - - - Tag Dress-up - Etiqueta de trajetória adicional - - - - Creates a Tag Dress-up object from a selected path - Cria etiqueta de trajetória adicional a partir de uma trajetória selecionada - - - - Please select one path object - Por favor selecione uma trajetória - - - - Create Tag Dress-up - Criar etiqueta de trajetória adicional - - - - Holding Tag - Etiqueta de fixação - The base path to modify @@ -3374,6 +3339,56 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Factor determining the # of segments used to approximate rounded tags. Factor determinando o número de segmentos usados para aproximar etiquetas arredondadas. + + + Cannot insert holding tags for this path - please select a Profile path + Não é possível inserir etiquetas de fixação para este caminho - por favor selecione um caminho de perfil + + + + The selected object is not a path + O objeto selecionado não é uma trajetória + + + + Please select a Profile object + Por favor, escolha um perfil + + + + Holding Tag + Etiqueta de fixação + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Criar etiqueta de trajetória adicional + + + + Tag Dress-up + Etiqueta de trajetória adicional + + + + Creates a Tag Dress-up object from a selected path + Cria etiqueta de trajetória adicional a partir de uma trajetória selecionada + + + + Please select one path object + Por favor selecione uma trajetória + + + + Create Tag Dress-up + Criar etiqueta de trajetória adicional + No Base object found. @@ -3394,21 +3409,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Base Path is empty. A trajetória de base está vazia. - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Please select a Profile object - Por favor, escolha um perfil - - - - Cannot insert holding tags for this path - please select a Profile path - Não é possível inserir etiquetas de fixação para este caminho - por favor selecione um caminho de perfil - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Job + + + Job + Tarefa + + + + Creates a Path Job object + Cria uma tarefa de trajetória + + + + Export Template + Exportar Modelo + + + + Exports Path Job as a template to be used for other jobs + Exporta a tarefa de trajetória como um modelo a ser usado para outras tarefas + + + + Create Job + Criar Tarefa + Edit Job @@ -3554,31 +3579,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Model Selection Model Selection - - - Create Job - Criar Tarefa - - - - Job - Tarefa - - - - Creates a Path Job object - Cria uma tarefa de trajetória - - - - Export Template - Exportar Modelo - - - - Exports Path Job as a template to be used for other jobs - Exporta a tarefa de trajetória como um modelo a ser usado para outras tarefas - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Probe - - Select Output File - Selecionar arquivo de saída + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Todos os arquivos (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Selecionar arquivo de saída diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm index 4559633fc4..f7435cbb1f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index 34d6412110..791e3b97de 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Adicionar paragem opcional ou obrigatória ao programa - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controla como se move a ferramenta nas esquinas. Predefinido=Redondo(boleado) - - - - Maximum distance before a miter join is truncated - Distancia máxima antes de que uma junta a meia-esquadria ser cortada - - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor extra para ficar longe do perfil final - bom para caminho de ferramenta de desbaste - - - - Profile holes as well as the outline - Perfilar furos assim como o seu contorno - - - - Profile the outline - Perfil do contorno - - - - Profile round holes - Perfilar furos redondos - - - - Side of edge that tool should cut - Lado da aresta que a ferramenta deve cortar - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - O objeto a ser alcançado por este salto - - - - The Z height of the hop - A altura de Z para o salto - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Verdadeiro, se especificar um ponto inicial - - - - Incremental Drill depth before retracting to clear chips - Profundidade incremental da fresa antes de retrair para limpeza das aparas - - - - Enable pecking - Habilitar picotar - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - A altura onde começa o avanço e altura quando a ferramenta é retraída no final da trajetória - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Deslocamento (offset) de fixação - - - - Make False, to prevent operation from generating code - Fazer Falso, para impedir a operação de gerar código - - - - Extra offset to apply to the operation. Direction is operation dependent. - Deslocamento extra para aplicar à operação. Direção é dependente de operação. - - - - Start pocketing at center or boundary - Começar a embolsar(pocketing) no centro ou no perímetro (boundary) - - - - Percent of cutter diameter to step over on each pass - Percentagem do diâmetro da fresa para sobrepor a cada passagem - - - - Angle of the zigzag pattern - Ângulo do padrão em zigue-zague - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Plano de orientação do caminho do CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Verdadeiro, se especificar um ponto inicial + The path to be copied O caminho a ser copiado + + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta + The tool controller that will be used to calculate the path O controlador de ferramenta que será usado para calcular a trajetória - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Altura a subir durante a ação de canto - - Ramping Method - Método de subida + + The object to be reached by this hop + O objeto a ser alcançado por este salto - - Which feed rate to use for ramping - Qual a taxa a usar para a rampa de avanço + + The Z height of the hop + A altura de Z para o salto - - Custom feedrate - Velocidade de avanço personalizada + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Método de geração do padrão (trama) - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Deslocamento (offset) de fixação + + + + Make False, to prevent operation from generating code + Fazer Falso, para impedir a operação de gerar código + + + + Ramping Method + Método de subida + + + + Which feed rate to use for ramping + Qual a taxa a usar para a rampa de avanço + + + + Custom feedrate + Velocidade de avanço personalizada + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Profundidade incremental da fresa antes de retrair para limpeza das aparas + + + + Enable pecking + Habilitar picotar + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + A altura onde começa o avanço e altura quando a ferramenta é retraída no final da trajetória + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Plano de orientação do caminho do CNC + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Deslocamento extra para aplicar à operação. Direção é dependente de operação. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Começar a embolsar(pocketing) no centro ou no perímetro (boundary) - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percentagem do diâmetro da fresa para sobrepor a cada passagem - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Ângulo do padrão em zigue-zague + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Adicionar paragem opcional ou obrigatória ao programa + + + + Pattern method + Método de geração do padrão (trama) + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controla como se move a ferramenta nas esquinas. Predefinido=Redondo(boleado) + + + + Maximum distance before a miter join is truncated + Distancia máxima antes de que uma junta a meia-esquadria ser cortada + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor extra para ficar longe do perfil final - bom para caminho de ferramenta de desbaste + + + + Profile holes as well as the outline + Perfilar furos assim como o seu contorno + + + + Profile the outline + Perfil do contorno + + + + Profile round holes + Perfilar furos redondos + + + + Side of edge that tool should cut + Lado da aresta que a ferramenta deve cortar + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - Operações 3D - - - - Project Setup - Configuração do projeto - - - - Tool Commands - Comandos da ferramenta - - - - New Operations - Novas Operações - - - - Path Modification - Modificação da trajetória - - - - Helpful Tools - Ferramentas úteis - - - - &Path - &trajetória - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Editar - - Heights - Alturas + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Operação AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Elimina Operação de AreaOp + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Escolher Ponto Inicial + + Didn't find job %s + Trabalho não encontrado %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Ângulo de corte de esquina inválido %.2f, deve ser <90º e >=0º + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Alturas - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Operação AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Elimina Operação de AreaOp + + + + Pick Start Point + Escolher Ponto Inicial + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Trabalho não encontrado %s + + 3D Operations + Operações 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Ângulo de corte de esquina inválido %.2f, deve ser <90º e >=0º + + Project Setup + Configuração do projeto - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Comandos da ferramenta - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Novas Operações - - Cutting Edge Angle (%.2f) results in negative tool tip length - Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa + + Path Modification + Modificação da trajetória + + + + Helpful Tools + Ferramentas úteis + + + + &Path + &trajetória + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Cria uma trajetória de entalhe em torno de um ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s Não tem nenhuma propriedade %s (%s)) - Cannot find property %s of %s Não consigo encontrar a propriedade %s de %s + + + %s has no property %s (%s)) + %s Não tem nenhuma propriedade %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Hélice + + + + Creates a Path Helix object from a features of a base object + Cria um objeto de trajetória hélice de uma características de um objeto de base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Hélice - - - - Creates a Path Helix object from a features of a base object - Cria um objeto de trajetória hélice de uma características de um objeto de base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Tipo de armazenamento não suportado%s + + + + Unsupported stock type %s (%d) + Tipo de armazenamento não suportado %s(%d) + + + + Stock not from Base bound box! + O armazenamento não respeita a caixa delimitadora do objeto base! + + + + Stock not a box! + O armazenamento não é uma caixa! + + + + Stock not a cylinder! + Não é um cilindro de armazenamento! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Versão de modelo de trabalho não suportada %s - - - Unsupported stock object %s - Tipo de armazenamento não suportado%s - - - - Unsupported stock type %s (%d) - Tipo de armazenamento não suportado %s(%d) - - - - Stock not from Base bound box! - O armazenamento não respeita a caixa delimitadora do objeto base! - - - - Stock not a box! - O armazenamento não é uma caixa! - - - - Stock not a cylinder! - Não é um cilindro de armazenamento! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Geometria base - - - - Base Location - Posição base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Profundidades - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Etiqueta atribuída pelo utilizador + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Geometria base + + + + Base Location + Posição base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Profundidades + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + vazio (bolso) 3D - - Pass Extension - Extensão da passada - - - - The distance the facing operation will extend beyond the boundary shape. - A distância que a operação de faciamento se prolongará para além do contorno da forma. + + Creates a Path 3D Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) 3D de uma face ou faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Faces verticais não formam uma sequência - ignorando - - 3D Pocket - vazio (bolso) 3D + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) 3D de uma face ou faces + + Pass Extension + Extensão da passada + + + + The distance the facing operation will extend beyond the boundary shape. + A distância que a operação de faciamento se prolongará para além do contorno da forma. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Cria uma trajetória de vazio (bolso) de uma face ou faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Erro ao atualizar o TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller A ferramenta usada por este controlador - - - Error updating TC: %s - Erro ao atualizar o TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - O caminho de base para modificar - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - O objeto selecionado não é uma trajetória - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + O caminho de base para modificar + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + O objeto selecionado não é uma trajetória + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Criar uma etiqueta de mascara - - - - Tag Dress-up - Etiqueta de mascara - - - - Creates a Tag Dress-up object from a selected path - Cria um objeto etiqueta de mascara de uma trajetória selecionada - - - - Please select one path object - Por favor selecione uma trajetória - - - - Create Tag Dress-up - Criar etiqueta de mascara - - - - Holding Tag - Etiqueta de fixação - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + O objeto selecionado não é uma trajetória + + + + Please select a Profile object + Por favor, selecione um objeto perfil + + + + Holding Tag + Etiqueta de fixação + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Criar uma etiqueta de mascara + + + + Tag Dress-up + Etiqueta de mascara + + + + Creates a Tag Dress-up object from a selected path + Cria um objeto etiqueta de mascara de uma trajetória selecionada + + + + Please select one path object + Por favor selecione uma trajetória + + + + Create Tag Dress-up + Criar etiqueta de mascara + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. A trajetória de base está vazia. - - - The selected object is not a path - O objeto selecionado não é uma trajetória - - - - Please select a Profile object - Por favor, selecione um objeto perfil - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Trabalho + + + + Creates a Path Job object + Cria um trabalho de trajetória + + + + Export Template + Exportar modelo + + + + Exports Path Job as a template to be used for other jobs + Exporta o trabalho como um modelo para ser usado noutros trabalhos + + + + Create Job + Criar trabalho + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Criar trabalho - - - - Job - Trabalho - - - - Creates a Path Job object - Cria um trabalho de trajetória - - - - Export Template - Exportar modelo - - - - Exports Path Job as a template to be used for other jobs - Exporta o trabalho como um modelo para ser usado noutros trabalhos - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Selecione o Ficheiro a criar + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Todos os Ficheiros (*. *) - - Select Probe Point File - Select Probe Point File + + Select Output File + Selecione o Ficheiro a criar diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm index d057c634da..933d150c1c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index bae8fcf0d5..b33df46779 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Adauga o oprire Opţională sau Obligatorie la program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controlează modul în care scula se mişcă în jurul colturi. Implicit = rotund - - - - Maximum distance before a miter join is truncated - Distanța maximă înainte de cuplarea miterului (45 °) este trunchiată - - - - The base geometry of this toolpath - Geometria bază a traiectoriei sculei - - - - Extra value to stay away from final profile- good for roughing toolpath - Grosimea necesară în raport cu profilul final -valabil pentru o degroșare - - - - Profile holes as well as the outline - Profilați găurile cât și conturul - - - - Profile the outline - Profilează conturul - - - - Profile round holes - Profil de găuri rotunde - - - - Side of edge that tool should cut - Latură a Muchiei pe care scula trebuie să o taie - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Obiect de atins în acest salt - - - - The Z height of the hop - Înălțimea Z a acestui salt - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Marchează « true » dacă este spedificat un Punct de Plecare - - - - Incremental Drill depth before retracting to clear chips - Incrementul (pasul la avans) de adâncime la găurire, înainte de retragerea burghiului pentru eliminarea așchiilor/șpanului - - - - Enable pecking - Activează returul sculei - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - Înălţime de plecare a sculei și de retragere a sculei atunci când traiectoria activă s-a terminat - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Numărul de Offset de fixare - - - - Make False, to prevent operation from generating code - Selectează "False" pentru a preveni generarea codului - - - - Extra offset to apply to the operation. Direction is operation dependent. - Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. - - - - Start pocketing at center or boundary - Începe frezarea buzunarului din centru sau de la margine - - - - Percent of cutter diameter to step over on each pass - Avansul în procente din diametrul sculei tăietor la fiecare trecere - - - - Angle of the zigzag pattern - Unghiul la modelul zig-zag - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientarea planului de lucru al parcursului CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Marchează « true » dacă este spedificat un Punct de Plecare + The path to be copied Calea de acces de copiat + + + The base geometry of this toolpath + Geometria bază a traiectoriei sculei + The tool controller that will be used to calculate the path Controlerul sculei care va utiizat pentru calcului traiectoriei - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Înălțimea de ridicare la procesul de colț - - Ramping Method - Metoda de plonjare în șpan + + The object to be reached by this hop + Obiect de atins în acest salt - - Which feed rate to use for ramping - Care este avansul de utilizat pentru intrare în span + + The Z height of the hop + Înălțimea Z a acestui salt - - Custom feedrate - Viteză de avans personalizată + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Adâncimea unde este activată avansul de intrare în șpan. Deasupra acestor rampe nu sunt generate, dar comenzile de mișcare sunt transmise așa cum sunt. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Metodă de operare - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Numărul de Offset de fixare + + + + Make False, to prevent operation from generating code + Selectează "False" pentru a preveni generarea codului + + + + Ramping Method + Metoda de plonjare în șpan + + + + Which feed rate to use for ramping + Care este avansul de utilizat pentru intrare în span + + + + Custom feedrate + Viteză de avans personalizată + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Adâncimea unde este activată avansul de intrare în șpan. Deasupra acestor rampe nu sunt generate, dar comenzile de mișcare sunt transmise așa cum sunt. + + + + Incremental Drill depth before retracting to clear chips + Incrementul (pasul la avans) de adâncime la găurire, înainte de retragerea burghiului pentru eliminarea așchiilor/șpanului + + + + Enable pecking + Activează returul sculei + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Înălţime de plecare a sculei și de retragere a sculei atunci când traiectoria activă s-a terminat + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientarea planului de lucru al parcursului CNC + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Începe frezarea buzunarului din centru sau de la margine - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Avansul în procente din diametrul sculei tăietor la fiecare trecere - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Unghiul la modelul zig-zag + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Adauga o oprire Opţională sau Obligatorie la program + + + + Pattern method + Metodă de operare + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controlează modul în care scula se mişcă în jurul colturi. Implicit = rotund + + + + Maximum distance before a miter join is truncated + Distanța maximă înainte de cuplarea miterului (45 °) este trunchiată + + + + Extra value to stay away from final profile- good for roughing toolpath + Grosimea necesară în raport cu profilul final -valabil pentru o degroșare + + + + Profile holes as well as the outline + Profilați găurile cât și conturul + + + + Profile the outline + Profilează conturul + + + + Profile round holes + Profil de găuri rotunde + + + + Side of edge that tool should cut + Latură a Muchiei pe care scula trebuie să o taie + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - Operații 3D - - - - Project Setup - Configurarea proiectului - - - - Tool Commands - Comenzile sculei - - - - New Operations - Operațiuni noi - - - - Path Modification - Modificare traiectoria - - - - Helpful Tools - Instrumente utile - - - - &Path - &Traiectorie - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Editare - - Heights - Înălţimi + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Operația AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Nu creați operația Area Op + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Selecționați punctul de plecare + + Didn't find job %s + Nu a găsit job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Unghiul muchiei tăietoare este invalid %.2f, trebuie să fie < 90 ° şi > = 0 ° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Unghiul muchiei tăietoare (%.2f) are ca rezultat o lungime negativă a vărfului sculei @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Înălţimi - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Operația AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Nu creați operația Area Op + + + + Pick Start Point + Selecționați punctul de plecare + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Nu a găsit job %s + + 3D Operations + Operații 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Unghiul muchiei tăietoare este invalid %.2f, trebuie să fie < 90 ° şi > = 0 ° + + Project Setup + Configurarea proiectului - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Comenzile sculei - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Operațiuni noi - - Cutting Edge Angle (%.2f) results in negative tool tip length - Unghiul muchiei tăietoare (%.2f) are ca rezultat o lungime negativă a vărfului sculei + + Path Modification + Modificare traiectoria + + + + Helpful Tools + Instrumente utile + + + + &Path + &Traiectorie + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - Vortezul index de la care pornește traiectoria - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creează o traiectorie de gravura în jurul unei schițe tip text + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + Vortezul index de la care pornește traiectoria + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s nu are nici o proprietate %s (%s)) - Cannot find property %s of %s Imposibil de găsit proprietatea %s de %s + + + %s has no property %s (%s)) + %s nu are nici o proprietate %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Spirala + + + + Creates a Path Helix object from a features of a base object + Creează un obiect traiectoriea Helix de caracteristici a unui obiect de bază + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Spirala - - - - Creates a Path Helix object from a features of a base object - Creează un obiect traiectoriea Helix de caracteristici a unui obiect de bază - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Tipul obiectului piesei de bază nu este acceptat% + + + + Unsupported stock type %s (%d) + Tip de semifabricat %s (%d) de Neacceptat + + + + Stock not from Base bound box! + Piesa de prelucrat nu vine din cadrul obiectului de bază! + + + + Stock not a box! + Brutul nu o cutie! + + + + Stock not a cylinder! + Brutul nu un cilindru! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Versiune nesuportată de șablon PathJob %s - - - Unsupported stock object %s - Tipul obiectului piesei de bază nu este acceptat% - - - - Unsupported stock type %s (%d) - Tip de semifabricat %s (%d) de Neacceptat - - - - Stock not from Base bound box! - Piesa de prelucrat nu vine din cadrul obiectului de bază! - - - - Stock not a box! - Brutul nu o cutie! - - - - Stock not a cylinder! - Brutul nu un cilindru! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Geometria de bază - - - - Base Location - Amplasamentul de bază - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Adâncimea - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Etichetă asignată de către utilizator + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Geometria de bază + + + + Base Location + Amplasamentul de bază + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Adâncimea + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Buzunar 3D - - Pass Extension - Adăugați o extensie - - - - The distance the facing operation will extend beyond the boundary shape. - Operarea fațetei se va extinde dincolo de limita suprafeței acesteia. + + Creates a Path 3D Pocket object from a face or faces + Creează o traiectorie 3D plecând de la muchiile unui buzunar, fațetă sau fațete @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Fațetele verticale nu formează o buclă - sunt ignorate - - 3D Pocket - Buzunar 3D + + Adaptive clearing and profiling + Curățare și profilare adaptată - - Creates a Path 3D Pocket object from a face or faces - Creează o traiectorie 3D plecând de la muchiile unui buzunar, fațetă sau fațete + + Pass Extension + Adăugați o extensie + + + + The distance the facing operation will extend beyond the boundary shape. + Operarea fațetei se va extinde dincolo de limita suprafeței acesteia. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creează un obiect tip buzunar plecând de la muchii sau o suprafață - - - Adaptive clearing and profiling - Curățare și profilare adaptată - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Eroare la actualizarea ratelor: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Instrumentul utilizat de către acest controler - - - Error updating TC: %s - Eroare la actualizarea ratelor: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Traiectoria de bază de modificat - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Obiectul selectat nu este o traiectorie - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Traiectoria de bază de modificat + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Obiectul selectat nu este o traiectorie + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Creaţi o etichetă adițională - - - - Tag Dress-up - Etichetă de traiectorie suplimentră - - - - Creates a Tag Dress-up object from a selected path - Creează un obiect etichetă a traiectoriei adiționale plecând de la parcursul selectat - - - - Please select one path object - Vă rugăm să selectaţi o traiectori tip obiect - - - - Create Tag Dress-up - Creaţi etichete de traiectorie adițională (Dress-up) - - - - Holding Tag - Punți tehnologice de menținere pe poziție la frezare - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + Obiectul selectat nu este o traiectorie + + + + Please select a Profile object + Vă rugăm să selectaţi un obiect contur + + + + Holding Tag + Punți tehnologice de menținere pe poziție la frezare + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Creaţi o etichetă adițională + + + + Tag Dress-up + Etichetă de traiectorie suplimentră + + + + Creates a Tag Dress-up object from a selected path + Creează un obiect etichetă a traiectoriei adiționale plecând de la parcursul selectat + + + + Please select one path object + Vă rugăm să selectaţi o traiectori tip obiect + + + + Create Tag Dress-up + Creaţi etichete de traiectorie adițională (Dress-up) + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Traiectoria de bază este vidă. - - - The selected object is not a path - Obiectul selectat nu este o traiectorie - - - - Please select a Profile object - Vă rugăm să selectaţi un obiect contur - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Sarcină + + + + Creates a Path Job object + Creează un obiect traiectorie de lucru + + + + Export Template + Export șablon + + + + Exports Path Job as a template to be used for other jobs + Exportă traiectoria a şablon pentru a fi utilizate pentru alte sarcini + + + + Create Job + Crează sarcina de lucru + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Crează sarcina de lucru - - - - Job - Sarcină - - - - Creates a Path Job object - Creează un obiect traiectorie de lucru - - - - Export Template - Export șablon - - - - Exports Path Job as a template to be used for other jobs - Exportă traiectoria a şablon pentru a fi utilizate pentru alte sarcini - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Selectaţi fişierul de ieşire + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Toate fișierele (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Selectaţi fişierul de ieşire diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm index c4fcdbada2..e8dc37727c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index 32369e2453..2cab6502f7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Добавить вспомогательную или обязательную точку остановки программы - - - - The base object this collision refers to - Базовый объект, к которому относится это столкновение - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - Направление движения инструмента по Часовой (CW) или Против часовой стрелки (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Расширить очистку профиля за пределы дополнительного смещения. - - - - Set the stepover percentage, based on the tool's diameter. - Установите процент перекрытия траекторий инструмента - в процентах от диаметра инструмента. - - - - Controls how tool moves around corners. Default=Round - Контролирует, как инструмент движется вокруг углов. По умолчанию = Round - - - - Maximum distance before a miter join is truncated - Максимальное расстояние до усечения стыка - - - - The base geometry of this toolpath - Базовая фигура для пути инструмента - - - - Extra value to stay away from final profile- good for roughing toolpath - Дополнительное расстояние на котором нужно оставаться от финального профиля - хорош для черновых обработок - - - - Profile holes as well as the outline - Профиль отверстия, а также наброски - - - - Profile the outline - Профиль набросков - - - - Profile round holes - Профиль круглые отверстия - - - - Side of edge that tool should cut - Сторона грани, которую инструмент должен вырезать - - - - Make True, if using Cutter Radius Compensation - Установить в Истину, если используется компенсация радиуса инструмента - - - - Reverse direction of pocket operation. - Обратное направление операции кармана. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Инвертировать угол. Пример: -22.5 -> 22.5 градусов. - - - - Attempt the inverse angle for face access if original rotation fails. - Попытка обратного угла доступа к грани, если оригинальное вращение не удалось. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Принудительная Z-глубина выбранной поверхности в качестве минимального значения конечной глубины. Видимо следует выбрать наибОльшее из наблюдаемых в нужной области значений (Higher user values will be observed). - - - - The object to be reached by this hop - Объект, которого требуется достичь на данном шаге - - - - The Z height of the hop - Наивысшее значение по оси Z для этого шага - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Включите поворот дополнительной оси, чтобы получить доступ к карманам/районам, не достигаемым через нормаль к оси Z. - Show the temporary path construction objects when module is in DEBUG mode. Показывать временные path при построении модуля в режиме DEBUG. - - - Enter custom start point for slot path. - Задать начальную точку для траектории паза. - - - - Enter custom end point for slot path. - Задать конечную точку для траектории паза. - - - - Set the geometric clearing pattern to use for the operation. - Выбирайте схему проходов, используемую для операции. - - - - Positive extends the beginning of the path, negative shortens. - Положительные расширяют начало пути, отрицательные сокращают. - - - - Positive extends the end of the path, negative shortens. - Положительные расширяют конец пути, отрицательные сокращают. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Завершите операцию в одном шаге по глубине (до целевой глубины) при многократных проходах до конечной глубины. - - - - Choose the path orientation with regard to the feature(s) selected. - Выберите ориентацию траектории для выбранной(ым) функции(ям). - - - - Choose what point to use on the first selected feature. - Выберите, какую точку использовать в первом выбранном элементе. - - - - Choose what point to use on the second selected feature. - Выберите, какую точку использовать во втором выбранном элементе. - - - - For arcs/circlular edges, offset the radius for the path. - Смещение радиуса траектории Для дуг/окружностей. - - - - Enable to reverse the cut direction of the slot path. - Включить обратное направление пути выреза паза. - - - - The custom start point for the path of this operation - Пользовательская начальная точка для пути к этой операции - - - - Make True, if specifying a Start Point - установить в Истину если указывается начальная точка - - - - Incremental Drill depth before retracting to clear chips - инкрементальный шаг заглубления сверла для вывода стружки - - - - Enable pecking - Включить сворачивание - - - - The time to dwell between peck cycles - Время задержки между циклами сверления - - - - Enable dwell - Включить задержку (dwell) - - - - Calculate the tip length and subtract from final depth - Рассчитать длину кончика и вычесть из окончательной глубины - - - - Controls how tool retracts Default=G98 - Контролирует, как отводится инструмент по умолчанию = G98 - - - - The height where feed starts and height during retract tool when path is finished - Высота на которой начинается подача и высота на которую возвращается инструмент по окончании прохождения пути - - - - Controls how tool retracts Default=G99 - Контролирует, как отводится инструмент по умолчанию = G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - Высота, на которой начинается рабочая подача и высота, на которую возвращается инструмент по окончании прохождения пути - - - - How far the drill depth is extended - Насколько глубоко увеличивается глубина сверления (вероятно речь о длине от кончика сверла до достижения его номинального диаметра, т.е. зависит от угла сверла) - - - - Fixture Offset Number - Номер отступа крепления - - - - Make False, to prevent operation from generating code - Установите значение в False, чтобы предотвратить генерацию G-кода для операции - - - - Extra offset to apply to the operation. Direction is operation dependent. - Дополнительное смещение применяется к операции. Направление зависит от операции. - - - - Start pocketing at center or boundary - Начинать обработку кармана из центра или от границ - - - - Percent of cutter diameter to step over on each pass - Процент диаметра фрезы для шага на каждом проходе - - - - Angle of the zigzag pattern - Угол наклона зигзагообразного узора - - - - Clearing pattern to use - Очистка шаблона для использования - - - - Use 3D Sorting of Path - Использовать 3D-сортировку пути - - - - Attempts to avoid unnecessary retractions. - Попытки избежать ненужных отходов. - - - - Orientation plane of CNC path - Плоскость обработки ЧПУ пути - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Задайте направление: по часовой стрелке (ClockWise) или против (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Выбирайте схему проходов, используемую для операции. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Установите смещение оси Z относительно целевой поверхности. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Завершите операцию в одном шаге по глубине (до целевой глубины) при многократных проходах до конечной глубины. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Установите шаг обработки. Меньшие значения быстро увеличивают время обработки. + + + Set the stepover percentage, based on the tool's diameter. + Установите процент перекрытия траекторий инструмента - в процентах от диаметра инструмента. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Обратная связь: три наименьших разрыва, выявленных в геометрии траектории. + + + The custom start point for the path of this operation + Пользовательская начальная точка для пути к этой операции + + + + Make True, if specifying a Start Point + установить в Истину если указывается начальная точка + The path to be copied Траектория для копирования + + + The base geometry of this toolpath + Базовая фигура для пути инструмента + The tool controller that will be used to calculate the path Контроллер инструмента, который будет использоваться для расчёта пути - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Выберите алгоритм для использования: OCL Dropcutter*, или экспериментальный (не основанный на OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Устанавливается для обработки последнего слоя в операции `Multi-pass` (многопроходной). - - - - Ignore outer waterlines above this height. - Игнорировать внешние waterlines над этой высотой. - The base path to modify @@ -534,54 +269,39 @@ Высота поднимается во время действия угла - - Ramping Method - Метод входа + + The object to be reached by this hop + Объект, которого требуется достичь на данном шаге - - Which feed rate to use for ramping - Какую подачу использовать для врезания + + The Z height of the hop + Наивысшее значение по оси Z для этого шага - - Custom feedrate - Произвольные скорости подачи + + X offset between tool and probe + Смещение по X между инструментом и зондом - - Custom feed rate - Скорость подачи при холостых перемещениях + + Y offset between tool and probe + Смещение по Y между инструментом и зондом - - Should the dressup ignore motion commands above DressupStartDepth - Должны ли доп. пути игнорировать движения выше глубины начала применения доп. путей (DressupStartDepth) + + Number of points to probe in X direction + Количество точек для зонда в направлении X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Глубина, на которой разрешены доп. пути врезания. Выше этого доп. пути врезания не генерируются, но команды движения передаются как есть. + + Number of points to probe in Y direction + Количество точек для зонда в направлении Y - - Pattern method - Метод шаблона - - - - Shape to use for calculating Boundary - Форма, используемая для расчета границы - - - - Clear edges of surface (Only applicable to BoundBox) - Очистить края поверхности (применимы только к BoundBox) - - - - Exclude milling raised areas inside the face. - Исключить фрезеровку частей детали, приподнятых относительно выбранной поверхности. + + The output location for the probe data to be written + Расположение (файла) для записи данных зонда probe @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Применить схему Отвод фрезы (инструмента) к слоям в ходе операции + + + Fixture Offset Number + Номер отступа крепления + + + + Make False, to prevent operation from generating code + Установите значение в False, чтобы предотвратить генерацию G-кода для операции + + + + Ramping Method + Метод входа + + + + Which feed rate to use for ramping + Какую подачу использовать для врезания + + + + Custom feedrate + Произвольные скорости подачи + + + + Custom feed rate + Скорость подачи при холостых перемещениях + + + + Should the dressup ignore motion commands above DressupStartDepth + Должны ли доп. пути игнорировать движения выше глубины начала применения доп. путей (DressupStartDepth) + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Глубина, на которой разрешены доп. пути врезания. Выше этого доп. пути врезания не генерируются, но команды движения передаются как есть. + + + + Incremental Drill depth before retracting to clear chips + инкрементальный шаг заглубления сверла для вывода стружки + + + + Enable pecking + Включить сворачивание + + + + The time to dwell between peck cycles + Время задержки между циклами сверления + + + + Enable dwell + Включить задержку (dwell) + + + + Calculate the tip length and subtract from final depth + Рассчитать длину кончика и вычесть из окончательной глубины + + + + Controls how tool retracts Default=G98 + Контролирует, как отводится инструмент по умолчанию = G98 + + + + The height where feed starts and height during retract tool when path is finished + Высота на которой начинается подача и высота на которую возвращается инструмент по окончании прохождения пути + + + + Controls how tool retracts Default=G99 + Контролирует, как отводится инструмент по умолчанию = G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + Высота, на которой начинается рабочая подача и высота, на которую возвращается инструмент по окончании прохождения пути + + + + How far the drill depth is extended + Насколько глубоко увеличивается глубина сверления (вероятно речь о длине от кончика сверла до достижения его номинального диаметра, т.е. зависит от угла сверла) + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Включите поворот дополнительной оси, чтобы получить доступ к карманам/районам, не достигаемым через нормаль к оси Z. + + + + Reverse direction of pocket operation. + Обратное направление операции кармана. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Инвертировать угол. Пример: -22.5 -> 22.5 градусов. + + + + Attempt the inverse angle for face access if original rotation fails. + Попытка обратного угла доступа к грани, если оригинальное вращение не удалось. + + + + Orientation plane of CNC path + Плоскость обработки ЧПУ пути + + + + Shape to use for calculating Boundary + Форма, используемая для расчета границы + + + + Clear edges of surface (Only applicable to BoundBox) + Очистить края поверхности (применимы только к BoundBox) + + + + Exclude milling raised areas inside the face. + Исключить фрезеровку частей детали, приподнятых относительно выбранной поверхности. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Выберите алгоритм для использования: OCL Dropcutter*, или экспериментальный (не основанный на OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Устанавливается для обработки последнего слоя в операции `Multi-pass` (многопроходной). + + + + Ignore outer waterlines above this height. + Игнорировать внешние waterlines над этой высотой. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Принудительная Z-глубина выбранной поверхности в качестве минимального значения конечной глубины. Видимо следует выбрать наибОльшее из наблюдаемых в нужной области значений (Higher user values will be observed). + + + + The base object this collision refers to + Базовый объект, к которому относится это столкновение + + + + Enter custom start point for slot path. + Задать начальную точку для траектории паза. + + + + Enter custom end point for slot path. + Задать конечную точку для траектории паза. + + + + Positive extends the beginning of the path, negative shortens. + Положительные расширяют начало пути, отрицательные сокращают. + + + + Positive extends the end of the path, negative shortens. + Положительные расширяют конец пути, отрицательные сокращают. + + + + Choose the path orientation with regard to the feature(s) selected. + Выберите ориентацию траектории для выбранной(ым) функции(ям). + + + + Choose what point to use on the first selected feature. + Выберите, какую точку использовать в первом выбранном элементе. + + + + Choose what point to use on the second selected feature. + Выберите, какую точку использовать во втором выбранном элементе. + + + + For arcs/circlular edges, offset the radius for the path. + Смещение радиуса траектории Для дуг/окружностей. + + + + Enable to reverse the cut direction of the slot path. + Включить обратное направление пути выреза паза. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Обработать модель и заготовку без учета ранее заданных припусков, размеров заготовки. - - X offset between tool and probe - Смещение по X между инструментом и зондом + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Направление движения инструмента по Часовой (CW) или Против часовой стрелки (CCW) - - Y offset between tool and probe - Смещение по Y между инструментом и зондом + + Extra offset to apply to the operation. Direction is operation dependent. + Дополнительное смещение применяется к операции. Направление зависит от операции. - - Number of points to probe in X direction - Количество точек для зонда в направлении X + + Start pocketing at center or boundary + Начинать обработку кармана из центра или от границ - - Number of points to probe in Y direction - Количество точек для зонда в направлении Y + + Percent of cutter diameter to step over on each pass + Процент диаметра фрезы для шага на каждом проходе - - The output location for the probe data to be written - Расположение (файла) для записи данных зонда probe + + Angle of the zigzag pattern + Угол наклона зигзагообразного узора + + + + Clearing pattern to use + Очистка шаблона для использования + + + + Use 3D Sorting of Path + Использовать 3D-сортировку пути + + + + Attempts to avoid unnecessary retractions. + Попытки избежать ненужных отходов. + + + + Add Optional or Mandatory Stop to the program + Добавить вспомогательную или обязательную точку остановки программы + + + + Pattern method + Метод шаблона + + + + Extend the profile clearing beyond the Extra Offset. + Расширить очистку профиля за пределы дополнительного смещения. + + + + Controls how tool moves around corners. Default=Round + Контролирует, как инструмент движется вокруг углов. По умолчанию = Round + + + + Maximum distance before a miter join is truncated + Максимальное расстояние до усечения стыка + + + + Extra value to stay away from final profile- good for roughing toolpath + Дополнительное расстояние на котором нужно оставаться от финального профиля - хорош для черновых обработок + + + + Profile holes as well as the outline + Профиль отверстия, а также наброски + + + + Profile the outline + Профиль набросков + + + + Profile round holes + Профиль круглые отверстия + + + + Side of edge that tool should cut + Сторона грани, которую инструмент должен вырезать + + + + Make True, if using Cutter Radius Compensation + Установить в Истину, если используется компенсация радиуса инструмента @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Операции гравировки - - - - 3D Operations - Трёхмерные операции - - - - Project Setup - Настройка проекта - - - - Tool Commands - Команды инструмента - - - - New Operations - Новые операции - - - - Path Modification - Модификация траектории - - - - Helpful Tools - Вспомогательные инструменты - - - - &Path - & Траектория - - - - Path Dressup - Путь, для которого делаем технологические поддерживающие перемычки - - - - Supplemental Commands - Дополнительные Команды - - - - Unable to create path for face(s). - Не удается создать траекторию для грани(ей). - - - - Face appears misaligned after initial rotation. - Грань станет неправильно выравнена после первоначального вращения. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. - - - - Multiple faces in Base Geometry. - Несколько граней в Базовой геометрии. - - - - Depth settings will be applied to all faces. - Настройки глубины будут применены ко всем граням. - - - - EnableRotation property is 'Off'. - Свойство позволить Вращение (EnableRotation) выключено. - - - - Rotated to inverse angle. - Угол поворта при обратном ходе. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Выбранные функции требуют - «Включить вращение: ось (x)». - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Выбранные функции требуют - «Включить вращение: B(y)». - - - - -<br>Pocket is based on extruded surface. - -<br>Карман основан на экструдированной поверхности. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Нижняя часть кармана может быть не плоской и/или не нормалью для оси шпинделя. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>Трёхмерный низ кармана НЕ доступен в этой операции</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет операции. - - - - Processing subs individually ... - Обработка подложки индивидуально ... - - - - Depth Warning - Предупреждение о глубине - - - - Verify final depth of pocket shaped by vertical faces. - Проверять конечную глубину кармана, сформированного вертикальными гранями. - - - - Processing model as a whole ... - Обработка модели как цельная ... - - - - Can not identify loop. - Не удается идентифицировать цикл. - Edit Редактировать - - Heights - Высоты + + %s is not a Base Model object of the job %s + %s не является базовым объектом для задания %s - - AreaOp Operation - AreaOp операция + + Base shape %s already in the list + Базовая фигура %s уже в списке - - Uncreate AreaOp Operation - Отмена AreaOp операции + + Ignoring vertex + Игнорирование вертекса - - Pick Start Point - Указать начальную точку + + Didn't find job %s + Не удалось найти задачу %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Недопустимый угол режущей кромки %.2f, должно быть <90° и >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Недопустимый угол резки %.2f, должен быть >0° и <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Неверный угол режущей кромки %.2f, должен быть >0° и <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Угол режущей кромки (%.2f) приводит к отрицательной длине наконечника инструмента @@ -1133,19 +1005,127 @@ Базовый объект %s.%s отклонен в результате операции - - %s is not a Base Model object of the job %s - %s не является базовым объектом для задания %s + + Heights + Высоты - - Base shape %s already in the list - Базовая фигура %s уже в списке + + AreaOp Operation + AreaOp операция - - Ignoring vertex - Игнорирование вертекса + + Uncreate AreaOp Operation + Отмена AreaOp операции + + + + Pick Start Point + Указать начальную точку + + + + +<br>Pocket is based on extruded surface. + +<br>Карман основан на экструдированной поверхности. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Нижняя часть кармана может быть не плоской и/или не нормалью для оси шпинделя. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>Трёхмерный низ кармана НЕ доступен в этой операции</i>. + + + + Face appears misaligned after initial rotation. + Грань станет неправильно выравнена после первоначального вращения. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. + + + + Multiple faces in Base Geometry. + Несколько граней в Базовой геометрии. + + + + Depth settings will be applied to all faces. + Настройки глубины будут применены ко всем граням. + + + + EnableRotation property is 'Off'. + Свойство позволить Вращение (EnableRotation) выключено. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет операции. + + + + Processing subs individually ... + Обработка подложки индивидуально ... + + + + Depth Warning + Предупреждение о глубине + + + + Verify final depth of pocket shaped by vertical faces. + Проверять конечную глубину кармана, сформированного вертикальными гранями. + + + + Processing model as a whole ... + Обработка модели как цельная ... + + + + Can not identify loop. + Не удается идентифицировать цикл. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Планарный адаптивный старт недоступен. Будет предпринят не планарный. + + + + The non-planar adaptive start is also unavailable. + Non-planar адаптивный старт также недоступен. + + + + Rotated to inverse angle. + Угол поворта при обратном ходе. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Выбранные функции требуют - «Включить вращение: ось (x)». + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Выбранные функции требуют - «Включить вращение: B(y)». @@ -1173,39 +1153,59 @@ При использовании края всегда выбирайте нижний край отверстия. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Планарный адаптивный старт недоступен. Будет предпринят не планарный. + + Unable to create path for face(s). + Не удается создать траекторию для грани(ей). - - The non-planar adaptive start is also unavailable. - Non-planar адаптивный старт также недоступен. + + Engraving Operations + Операции гравировки - - Didn't find job %s - Не удалось найти задачу %s + + 3D Operations + Трёхмерные операции - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Недопустимый угол режущей кромки %.2f, должно быть <90° и >=0° + + Project Setup + Настройка проекта - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Недопустимый угол резки %.2f, должен быть >0° и <=180° + + Tool Commands + Команды инструмента - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Неверный угол режущей кромки %.2f, должен быть >0° и <=180° + + New Operations + Новые операции - - Cutting Edge Angle (%.2f) results in negative tool tip length - Угол режущей кромки (%.2f) приводит к отрицательной длине наконечника инструмента + + Path Modification + Модификация траектории + + + + Helpful Tools + Вспомогательные инструменты + + + + &Path + & Траектория + + + + Path Dressup + Путь, для которого делаем технологические поддерживающие перемычки + + + + Supplemental Commands + Дополнительные Команды @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Дополнительные базовые объекты для гравировки - - - - The vertex index to start the path from - Индекс вершины от которой начнется траектория - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Создаёт Путь Гравировки вокруг наброска ФормыСтроки + + + Additional base objects to be engraved + Дополнительные базовые объекты для гравировки + + + + The vertex index to start the path from + Индекс вершины от которой начнется траектория + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s не имеет свойства %s (%s)) - Cannot find property %s of %s Не возможно найти свойство %s у %s + + + %s has no property %s (%s)) + %s не имеет свойства %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Спираль + + + + Creates a Path Helix object from a features of a base object + Создает ПутьСпираль из элементов базового объекта + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Радиус начала - - - Helix - Спираль - - - - Creates a Path Helix object from a features of a base object - Создает ПутьСпираль из элементов базового объекта - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Неподдерживаемый объект заготовки %s + + + + Unsupported stock type %s (%d) + Неподдерживаемый тип заготовки %s (%d) + + + + Stock not from Base bound box! + Заготовка не из базового ограничивающего объёма! + + + + Stock not a box! + Заготовка не блок! + + + + Stock not a cylinder! + Заготовка не цилиндр! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Неподдерживаемый шаблон Задания Пути версии %s - - - Unsupported stock object %s - Неподдерживаемый объект заготовки %s - - - - Unsupported stock type %s (%d) - Неподдерживаемый тип заготовки %s (%d) - - - - Stock not from Base bound box! - Заготовка не из базового ограничивающего объёма! - - - - Stock not a box! - Заготовка не блок! - - - - Stock not a cylinder! - Заготовка не цилиндр! - Solids @@ -1669,42 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Оценка времени цикла задачи - - - - Operations Cycle Time Estimation - Оценка времени цикла операций - - - - Base Geometry - Базовая Геометрия - - - - Base Location - Базовое Расположение - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - ФинальнаяВысота не может быть изменена для этой операции. Если необходимо вручную установленная ФинальнаяВысота, пожалуйста, выберите другую операцию. - - - - Depths - Глубины - - - - Operation - Операция - The base geometry for this operation @@ -1750,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Пользовательская Метка + + + Operations Cycle Time Estimation + Оценка времени цикла операций + Base locations for this operation @@ -1815,6 +1784,37 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Опция охлаждения для этой операции + + + Base Geometry + Базовая Геометрия + + + + Base Location + Базовое Расположение + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + ФинальнаяВысота не может быть изменена для этой операции. Если необходимо вручную установленная ФинальнаяВысота, пожалуйста, выберите другую операцию. + + + + Depths + Глубины + + + + Operation + Операция + + + + Job Cycle Time Estimation + Оценка времени цикла задачи + PathOpGui @@ -1827,19 +1827,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Выберите, как обрабатывать несколько функций базовой геометрии. + + 3D Pocket + трёхмерный карман - - Pass Extension - Припуск - - - - The distance the facing operation will extend beyond the boundary shape. - Припуском называется толщина лишнего слоя, оставляемого на поверхности заготовки для последующей обработки резанием. + + Creates a Path 3D Pocket object from a face or faces + Создаёт Путь обработки трёхмерного кармана используя контур состоящий из рёбер или из грани @@ -1857,14 +1852,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Вертикальные грани не образуют петлю - игнорирование - - 3D Pocket - трёхмерный карман + + Adaptive clearing and profiling + Адаптивная очистка и профилирование - - Creates a Path 3D Pocket object from a face or faces - Создаёт Путь обработки трёхмерного кармана используя контур состоящий из рёбер или из грани + + Pass Extension + Припуск + + + + The distance the facing operation will extend beyond the boundary shape. + Припуском называется толщина лишнего слоя, оставляемого на поверхности заготовки для последующей обработки резанием. + + + + Choose how to process multiple Base Geometry features. + Выберите, как обрабатывать несколько функций базовой геометрии. + + + + Final depth set below ZMin of face(s) selected. + Конечная глубина ниже заданного ZMin. @@ -1891,16 +1901,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани - - - Adaptive clearing and profiling - Адаптивная очистка и профилирование - - - - Final depth set below ZMin of face(s) selected. - Конечная глубина ниже заданного ZMin. - Generating toolpath with libarea offsets. @@ -1949,6 +1949,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Профиль основанный на грани или гранях + Profile @@ -2019,11 +2024,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. Для открытых краев проверьте Конечную Глубину для этой операции. - - - Profile based on face or faces - Профиль основанный на грани или гранях - Edge Profile @@ -2434,26 +2434,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Не удалось определить инструмент для операции. - - - - Failed to map selected tool to an OCL tool type. - Не удалось сопоставить выбранный инструмент с типом инструмента OCL. - - - - Failed to translate active tool to OCL tool type. - Не удалось перевести активный инструмент в тип инструмента OCL. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL инструмент недоступен. Невозможно определить доступный наклон резака. - This operation requires OpenCamLib to be installed. @@ -2559,6 +2539,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. Нет сканированных данных для преобразования в Gcode. + + + Failed to identify tool for operation. + Не удалось определить инструмент для операции. + + + + Failed to map selected tool to an OCL tool type. + Не удалось сопоставить выбранный инструмент с типом инструмента OCL. + + + + Failed to translate active tool to OCL tool type. + Не удалось перевести активный инструмент в тип инструмента OCL. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL инструмент недоступен. Невозможно определить доступный наклон резака. + Hold on. This might take a minute. @@ -2673,56 +2673,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Создать Инструмент - - - - Creates a new ToolBit object - Создать новый объект Наборного инструмента - - - - Save Tool as... - Сохранить инструмент как... - - - - Save Tool - Сохранить инструмент - - - - Save an existing ToolBit object to a file - Сохранить существующий инструмент в файл - - - - Load Tool - Загрузить Инструмент - - - - Load an existing ToolBit object from a file - Загрузить существующий инструмент из файла - - - - Edit ToolBit - Изменить набор инструментов - - - - Uncreate ToolBit - Не создавать инструмент - - - - Create ToolBit - Создать Наборный инструмент - Shape for bit shape @@ -2763,6 +2713,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Нагрузка по документации завода-изготовителя + + + Edit ToolBit + Изменить набор инструментов + + + + Uncreate ToolBit + Не создавать инструмент + + + + Create ToolBit + Создать Наборный инструмент + + + + Create Tool + Создать Инструмент + + + + Creates a new ToolBit object + Создать новый объект Наборного инструмента + + + + Save Tool as... + Сохранить инструмент как... + + + + Save Tool + Сохранить инструмент + + + + Save an existing ToolBit object to a file + Сохранить существующий инструмент в файл + + + + Load Tool + Загрузить Инструмент + + + + Load an existing ToolBit object from a file + Загрузить существующий инструмент из файла + PathToolBitLibrary @@ -2789,6 +2789,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Ошибка при обновлении TC: %s + The active tool @@ -2839,11 +2844,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Инструмент, используемый этим контроллером - - - Error updating TC: %s - Ошибка при обновлении TC: %s - PathToolLibraryManager @@ -3227,26 +3227,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Базовый путь для модификации - - - - Solid object to be used to limit the generated Path. - Твердый объект, тело, используемое для ограничения создаваемых путей, операций. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Задаваемая граница - граница включающаяся, или исключающаяся. - - - - The selected object is not a path - Выделенный объект не является путём - Create a Boundary dressup @@ -3272,6 +3252,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Создать технологические перемычки + + + The base path to modify + Базовый путь для модификации + + + + Solid object to be used to limit the generated Path. + Твердый объект, тело, используемое для ограничения создаваемых путей, операций. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Задаваемая граница - граница включающаяся, или исключающаяся. + + + + The selected object is not a path + Выделенный объект не является путём + Path_DressupRampEntry @@ -3298,41 +3298,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Невозможно скопировать теги - внутренняя ошибка - - - - Create a Tag dressup - Создать ДопПути технолог. перемычка - - - - Tag Dress-up - ДопПути техн. перемычка - - - - Creates a Tag Dress-up object from a selected path - Создать объект ДопПути технологическая перемычка на выбранном пути - - - - Please select one path object - Пожалуйста выберете один объект пути - - - - Create Tag Dress-up - Создать ДопПути техн. перемычка - - - - Holding Tag - Технологич. перемычка - The base path to modify @@ -3373,6 +3338,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Фактор, определяющий #количество сегментов, используемые для аппроксимации скругленных технологических перемычек. + + + Cannot insert holding tags for this path - please select a Profile path + Невозможно вставить технологические перемычки для этого пути. Пожалуйста, выберите путь профиль + + + + The selected object is not a path + Выделенный объект не является путём + + + + Please select a Profile object + Пожалуйста выберите Профиль объект + + + + Holding Tag + Технологич. перемычка + + + + Cannot copy tags - internal error + Невозможно скопировать теги - внутренняя ошибка + + + + Create a Tag dressup + Создать ДопПути технолог. перемычка + + + + Tag Dress-up + ДопПути техн. перемычка + + + + Creates a Tag Dress-up object from a selected path + Создать объект ДопПути технологическая перемычка на выбранном пути + + + + Please select one path object + Пожалуйста выберете один объект пути + + + + Create Tag Dress-up + Создать ДопПути техн. перемычка + No Base object found. @@ -3393,21 +3408,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Базовый Путь пуст. - - - The selected object is not a path - Выделенный объект не является путём - - - - Please select a Profile object - Пожалуйста выберите Профиль объект - - - - Cannot insert holding tags for this path - please select a Profile path - Невозможно вставить технологические перемычки для этого пути. Пожалуйста, выберите путь профиль - Path_DressupZCorrect @@ -3528,6 +3528,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Задание + + + + Creates a Path Job object + Создает объект Задания Пути + + + + Export Template + Экспорт шаблона + + + + Exports Path Job as a template to be used for other jobs + Экспортирует Путь Задания в качестве шаблона, который будет использоваться для других заданий + + + + Create Job + Создать Задание + Edit Job @@ -3553,31 +3578,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Выбор модели - - - Create Job - Создать Задание - - - - Job - Задание - - - - Creates a Path Job object - Создает объект Задания Пути - - - - Export Template - Экспорт шаблона - - - - Exports Path Job as a template to be used for other jobs - Экспортирует Путь Задания в качестве шаблона, который будет использоваться для других заданий - Path_OpActiveToggle @@ -3637,9 +3637,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Выберите выходной файл + + Select Probe Point File + Выберите пробную точку файла @@ -3647,9 +3647,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Все файлы (*.*) - - Select Probe Point File - Выберите пробную точку файла + + Select Output File + Выберите выходной файл diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm index 560b4b6c77..c7ef30556b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts index b157d6c153..90e9385053 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Vypočítajte dĺžku špičky a odpočítajte ju od konečnej hĺbky - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path Ovládač nástroja, ktorý sa použije na výpočet dráhy - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Metóda rozbiehania + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Tvar, ktorý sa má použiť na výpočet ohraničenia - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Metóda rozbiehania + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Vypočítajte dĺžku špičky a odpočítajte ju od konečnej hĺbky + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Tvar, ktorý sa má použiť na výpočet ohraničenia + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Upraviť - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Špirála + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Špirála - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Nástroj používaný týmto ovládačom - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Všetky súbory (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm index 8f2fcb38a9..48238da3af 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index c6c0e53163..faa9b409d8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -3,280 +3,10 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Doda izbirno ali obvezno ustavitev programa - - - - The base object this collision refers to - Osnovni objekt na katerega se to trčenje nanaša - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - Smer, po kateri naj gre pot orodja okoli dela v SUK (smeri urinega kazalca) ali NSUK (nasprotni smeri urinega kazalca) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Nadzira, kako se orodje premika okoli vogalov. Privzeto=Okroglo - - - - Maximum distance before a miter join is truncated - Največja razdalja preden se spoj na zajero prireže - - - - The base geometry of this toolpath - Osnovna geometrija te poti orodja - - - - Extra value to stay away from final profile- good for roughing toolpath - Dodatna vrednost za odmikanje od končnega prereza - primerno za pot orodja pri grobi obdelavi - - - - Profile holes as well as the outline - Profiliraj luknje kakor tudi oris - - - - Profile the outline - Profiliraj oris - - - - Profile round holes - Profiliraj okrogle luknje - - - - Side of edge that tool should cut - Stran roba, s katere naj orodje reže - - - - Make True, if using Cutter Radius Compensation - Nastavi Prav, če se uporablja Kompenzacija Radija Rezalnika - - - - Reverse direction of pocket operation. - Nasprotna smer obdelave ugreza. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Obrni kot. Primer: -22.5 -> 22.5 stopinj. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Predmet, ki naj ga ta skok doseže - - - - The Z height of the hop - Višina Z skoka - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Omogoči sukanje, da bi se doseglo ugreze ali površja, ki niso pravokotna na Z os. - Show the temporary path construction objects when module is in DEBUG mode. - Show the temporary path construction objects when module is in DEBUG mode. - - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Naredi Resnično, če je določena začetna točka - - - - Incremental Drill depth before retracting to clear chips - Globinski korak vrtanja pred umikom za odstranjevanje ostružkov - - - - Enable pecking - Omogoči kljuvanje - - - - The time to dwell between peck cycles - Čas zadrževanja med cikli kljuvanja - - - - Enable dwell - Omogoči mirovanje - - - - Calculate the tip length and subtract from final depth - Izračunaj dolžino konice in jo odštej od končne globine - - - - Controls how tool retracts Default=G98 - Upravlja kako se orodje vrne Privzeto=G98 - - - - The height where feed starts and height during retract tool when path is finished - Višina začetka podajanja in višina vračanja orodja, ko je pot končana - - - - Controls how tool retracts Default=G99 - Upravlja kako se orodje vrne Privzeto=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - Višina začetka podajanja in višinavračanja orodja, ko je med opravilom kljuvanja pot končana - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Število odmika pritrdilnega elementa - - - - Make False, to prevent operation from generating code - Naredi Napak, da se opravilu prepreči ustvarjanje kode - - - - Extra offset to apply to the operation. Direction is operation dependent. - Dodaten odmik za uporabo pri delovanju. Smer je odvisna od delovanja. - - - - Start pocketing at center or boundary - Začni dolbsti ugrez na sredini ali robu - - - - Percent of cutter diameter to step over on each pass - Delež povečanja premera rezalnika pri vsakem prehodu - - - - Angle of the zigzag pattern - Kot cik-cak vzorca - - - - Clearing pattern to use - Vzorec čiščenja, ki se uporabi - - - - Use 3D Sorting of Path - Uporavi 3D-razvrščanje poti - - - - Attempts to avoid unnecessary retractions. - Poskuša se izogniti nepotrebnim vračanjem. - - - - Orientation plane of CNC path - Usmerjevalna ravnina poti CNC + Ko je modul v razhroščevalnem načinu, prikaži začasni predmet za ustvarjanje poti. @@ -296,7 +26,7 @@ Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. + Črte spustnega rezkanja se naredijo vzporedno s to osjo. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -471,48 +216,38 @@ Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. - Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. + Kolinearne in sopolmerne (co-radial) pokvarbene vrzeli, ki so manjše od tega praga, se na poti premostijo. Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Naredi Resnično, če je določena začetna točka + The path to be copied Pot za kopiranje + + + The base geometry of this toolpath + Osnovna geometrija te poti orodja + The tool controller that will be used to calculate the path Krmilnik orodja, ki bo uporabljen za izračun poti - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Višina na katero naj se dvigne med kotnim dejanjem - - Ramping Method - Metoda rampe + + The object to be reached by this hop + Predmet, ki naj ga ta skok doseže - - Which feed rate to use for ramping - Katero hitrost podajanja uporabiti za klančino + + The Z height of the hop + Višina Z skoka - - Custom feedrate - Stopnja podajanja po meri + + X offset between tool and probe + Odmik med orodjem in tipalom v smeri X - - Custom feed rate - Stopnja podajanja po meri + + Y offset between tool and probe + Odmik med orodjem in tipalom v smeri Y - - Should the dressup ignore motion commands above DressupStartDepth - Bi morala dodelava prezreti ukaze gibanja nad DodelavnoZačetnoGlobino + + Number of points to probe in X direction + Število točk zaznavanja v smeri X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Globina, pri kateri je dodelava s spustno klančino omogočena. Nad to globino spustne klančine niso ustvarjene in navodila za gibanja so posredovana takšna, kot so. + + Number of points to probe in Y direction + Število točk zaznavanja v smeri Y - - Pattern method - Metoda vzorca - - - - Shape to use for calculating Boundary - Oblika, ki se uporabi za izračun Meje - - - - Clear edges of surface (Only applicable to BoundBox) - Odstrani robove površja (izvedljivo le za BoundBox) - - - - Exclude milling raised areas inside the face. - Izvzemi rezkanje dvignjenih površin znotraj ploskve. + + The output location for the probe data to be written + Mesto zapisa meritev tipala @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Uveljavi vstop/izstop na plasteh znotraj opravila + + + Fixture Offset Number + Število odmika pritrdilnega elementa + + + + Make False, to prevent operation from generating code + Naredi Napak, da se opravilu prepreči ustvarjanje kode + + + + Ramping Method + Metoda rampe + + + + Which feed rate to use for ramping + Katero hitrost podajanja uporabiti za klančino + + + + Custom feedrate + Stopnja podajanja po meri + + + + Custom feed rate + Stopnja podajanja po meri + + + + Should the dressup ignore motion commands above DressupStartDepth + Bi morala dodelava prezreti ukaze gibanja nad DodelavnoZačetnoGlobino + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Globina, pri kateri je dodelava s spustno klančino omogočena. Nad to globino spustne klančine niso ustvarjene in navodila za gibanja so posredovana takšna, kot so. + + + + Incremental Drill depth before retracting to clear chips + Globinski korak vrtanja pred umikom za odstranjevanje odrezkov + + + + Enable pecking + Omogoči kljuvanje + + + + The time to dwell between peck cycles + Čas zadrževanja med cikli kljuvanja + + + + Enable dwell + Omogoči mirovanje + + + + Calculate the tip length and subtract from final depth + Izračunaj dolžino konice in jo odštej od končne globine + + + + Controls how tool retracts Default=G98 + Upravlja kako se orodje vrne Privzeto=G98 + + + + The height where feed starts and height during retract tool when path is finished + Višina začetka podajanja in višina vračanja orodja, ko je pot končana + + + + Controls how tool retracts Default=G99 + Upravlja kako se orodje vrne Privzeto=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + Višina začetka podajanja in višinavračanja orodja, ko je med opravilom kljuvanja pot končana + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Omogoči sukanje, da bi se doseglo ugreze ali površja, ki niso pravokotna na Z os. + + + + Reverse direction of pocket operation. + Nasprotna smer obdelave ugreza. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Obrni kot. Primer: -22.5 -> 22.5 stopinj. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Usmerjevalna ravnina poti CNC + + + + Shape to use for calculating Boundary + Oblika, ki se uporabi za izračun Meje + + + + Clear edges of surface (Only applicable to BoundBox) + Odstrani robove površja (izvedljivo le za BoundBox) + + + + Exclude milling raised areas inside the face. + Izvzemi rezkanje dvignjenih površin znotraj ploskve. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Osnovni objekt na katerega se to trčenje nanaša + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Obdelaj obdelovanec in zalogo z opravilom brez izbrane geometrije podloge. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Smer, po kateri naj gre pot orodja okoli dela v SUK (smeri urinega kazalca) ali NSUK (nasprotni smeri urinega kazalca) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Dodaten odmik za uporabo pri delovanju. Smer je odvisna od delovanja. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Začni dolbsti ugrez na sredini ali robu - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Delež povečanja premera rezalnika pri vsakem prehodu - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Kot cik-cak vzorca + + + + Clearing pattern to use + Vzorec čiščenja, ki se uporabi + + + + Use 3D Sorting of Path + Uporavi 3D-razvrščanje poti + + + + Attempts to avoid unnecessary retractions. + Poskuša se izogniti nepotrebnim vračanjem. + + + + Add Optional or Mandatory Stop to the program + Doda izbirno ali obvezno ustavitev programa + + + + Pattern method + Metoda vzorca + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Nadzira, kako se orodje premika okoli vogalov. Privzeto=Okroglo + + + + Maximum distance before a miter join is truncated + Največja razdalja preden se spoj na zajero prireže + + + + Extra value to stay away from final profile- good for roughing toolpath + Dodatna vrednost za odmikanje od končnega prereza - primerno za pot orodja pri grobi obdelavi + + + + Profile holes as well as the outline + Profiliraj luknje kakor tudi oris + + + + Profile the outline + Profiliraj oris + + + + Profile round holes + Profiliraj okrogle luknje + + + + Side of edge that tool should cut + Stran roba, s katere naj orodje reže + + + + Make True, if using Cutter Radius Compensation + Nastavi Prav, če se uporablja Kompenzacija Radija Rezalnika @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Vrezovalne Opravila - - - - 3D Operations - 3D Opravila - - - - Project Setup - Nastavitev projekta - - - - Tool Commands - Ukazi Orodja - - - - New Operations - Nova opravila - - - - Path Modification - Sprememba Poti - - - - Helpful Tools - Koristna Orodja - - - - &Path - &Pot - - - - Path Dressup - Dodelava poti - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Ni mogoče ustvariti poti za ploskev(ploskve). - - - - Face appears misaligned after initial rotation. - Ploskev izgleda neporavnana po začetnem vrtenju. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. - - - - Multiple faces in Base Geometry. - Večkratne ploskve v Osnovni Geometriji. - - - - Depth settings will be applied to all faces. - Nastavitev globine bo uporabljena na vseh ploskvah. - - - - EnableRotation property is 'Off'. - Značilnost OmogočiVrtenje je 'Izklopljeno'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Ugrez temelji na izrinjenem površju. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Dno ugreza je mogoče neravno in/ali ni pravokotno na os vretena. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3d dno ugreza NI na voljo pri tem opravilu</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Razmisli o preklapljanju značilnosti ObratniKot in ponovnem izračunu opravila. - - - - Processing subs individually ... - Obravnavanje spodnjih posamezno... - - - - Depth Warning - Opozorilo na globino - - - - Verify final depth of pocket shaped by vertical faces. - Preveri končno globino ugreza oblikovanega s pokončnimi ploskvami. - - - - Processing model as a whole ... - Obravnavanje modela kot celote... - - - - Can not identify loop. - Ni mogoče prepoznati zanke. - Edit Uredi - - Heights - Višine + + %s is not a Base Model object of the job %s + %s ni Osnovni Model objekta opravila %s - - AreaOp Operation - AreaOp Opravilo + + Base shape %s already in the list + Osnovna oblika %s že na seznamu - - Uncreate AreaOp Operation - Odstrani AreaOp Opravilo + + Ignoring vertex + Prezri ogljišče - - Pick Start Point - Izberite Začetno Točko + + Didn't find job %s + Ne najde opravila %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Neveljaven Kot Rezilnega Roba %.2f, biti mora <90° in >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Neveljaven Kot Rezilnega Roba %.2f, biti mora >0° in <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Kot Rezilnega Roba (%.2f) rezultira v negativni dolžini konice orodja @@ -1080,7 +952,7 @@ No coolant property found. Please recreate operation. - No coolant property found. Please recreate operation. + Ni mogoče najti hladilne lastnosti. Poustvarite opravilo. @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s ni Osnovni Model objekta opravila %s + + Heights + Višine - - Base shape %s already in the list - Osnovna oblika %s že na seznamu + + AreaOp Operation + AreaOp Opravilo - - Ignoring vertex - Prezri ogljišče + + Uncreate AreaOp Operation + Izniči AreaOp Opravilo + + + + Pick Start Point + Izberite Začetno Točko + + + + +<br>Pocket is based on extruded surface. + +<br>Ugrez temelji na izrinjenem površju. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Dno ugreza je mogoče neravno in/ali ni pravokotno na os vretena. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3d dno ugreza NI na voljo pri tem opravilu</i>. + + + + Face appears misaligned after initial rotation. + Ploskev izgleda neporavnana po začetnem vrtenju. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. + + + + Multiple faces in Base Geometry. + Večkratne ploskve v Osnovni Geometriji. + + + + Depth settings will be applied to all faces. + Nastavitev globine bo uporabljena na vseh ploskvah. + + + + EnableRotation property is 'Off'. + Značilnost OmogočiVrtenje je 'Izklopljeno'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Razmisli o preklapljanju značilnosti ObratniKot in ponovnem izračunu opravila. + + + + Processing subs individually ... + Obravnavanje spodnjih posamezno... + + + + Depth Warning + Opozorilo na globino + + + + Verify final depth of pocket shaped by vertical faces. + Preveri končno globino ugreza oblikovanega s pokončnimi ploskvami. + + + + Processing model as a whole ... + Obravnavanje modela kot celote... + + + + Can not identify loop. + Ni mogoče prepoznati zanke. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + Ravninsko nastavljiv začetek ni na voljo. Poizkušen bo neravninski. + + + + The non-planar adaptive start is also unavailable. + Tudi neravninsko prilagodljiv začetek ni na voljo. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - Ravninsko nastavljiv začetek ni na voljo. Poizkušen bo neravninski. + + Unable to create path for face(s). + Ni mogoče ustvariti poti za ploskev(ploskve). - - The non-planar adaptive start is also unavailable. - Tudi neravninsko prilagodljiv začetek ni na voljo. + + Engraving Operations + Vrezovalne Opravila - - Didn't find job %s - Ne najde opravila %s + + 3D Operations + 3D Opravila - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Neveljaven Kot Rezilnega Roba %.2f, biti mora <90° in >=0° + + Project Setup + Nastavitev projekta - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Ukazi Orodja - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Neveljaven Kot Rezilnega Roba %.2f, biti mora >0° in <=180° + + New Operations + Nova opravila - - Cutting Edge Angle (%.2f) results in negative tool tip length - Kot Rezilnega Roba (%.2f) rezultira v negativni dolžini konice orodja + + Path Modification + Sprememba Poti + + + + Helpful Tools + Koristna Orodja + + + + &Path + &Pot + + + + Path Dressup + Dodelava poti + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Dodatni osnovni objekt, ki naj bo vrezan - - - - The vertex index to start the path from - Indeks ogljišča, pri katerem naj se začne pot - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Ustvari pot vrezovanja po očrtu besedilne oblike + + + Additional base objects to be engraved + Dodatni osnovni objekt, ki naj bo vrezan + + + + The vertex index to start the path from + Indeks ogljišča, pri katerem naj se začne pot + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s nima lastnosti %s (%s)) - Cannot find property %s of %s Ni mogoče najti lastnosti %s od %s + + + %s has no property %s (%s)) + %s nima lastnosti %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Vijačnica + + + + Creates a Path Helix object from a features of a base object + Ustvari objekt Pot Vijačnice iz značilnosti osnovnega objekta + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Vijačnica - - - - Creates a Path Helix object from a features of a base object - Ustvari objekt Pot Vijačnice iz značilnosti osnovnega objekta - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Nepodprt objekt zaloge %s + + + + Unsupported stock type %s (%d) + Nepodprt tip zaloge %s (%d) + + + + Stock not from Base bound box! + Zaloga ni iz Osnovnega mejnega kvadra! + + + + Stock not a box! + Zaloga ni kvader! + + + + Stock not a cylinder! + Zaloga ni valj! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Nepodprta različica predloge OpravilaPoti %s - - - Unsupported stock object %s - Nepodprt objekt zaloge %s - - - - Unsupported stock type %s (%d) - Nepodprt tip zaloge %s (%d) - - - - Stock not from Base bound box! - Zaloga ni iz Osnovnega mejnega kvadra! - - - - Stock not a box! - Zaloga ni kvader! - - - - Stock not a cylinder! - Zaloga ni valj! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Osnovna Geometrija - - - - Base Location - Položaj Osnove - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - KončnaGlobina ne more biti spremenjena za to opravilo. -Če je potrebno nastaviti KončnoDolžino ročno, prosim izberi drugo opravilo. - - - - Depths - Globine - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Uporabniško prirejena oznaka + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1764,7 +1732,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant mode for this operation - Coolant mode for this operation + Hladilni način za to opravilo @@ -1814,7 +1782,39 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation - Coolant option for this operation + Možnosti hlajenja za to opravilo + + + + Base Geometry + Osnovna Geometrija + + + + Base Location + Položaj Osnove + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + KončnaGlobina ne more biti spremenjena za to opravilo. +Če je potrebno nastaviti KončnoDolžino ročno, prosim izberi drugo opravilo. + + + + Depths + Globine + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Izberite, kako naj se obdeluje značilnosti večih osnovnih geometrij. + + 3D Pocket + 3D Ugrez - - Pass Extension - Podaljšek Prehoda - - - - The distance the facing operation will extend beyond the boundary shape. - Razdalja, ki jo bo opravilo ploščenja podaljšalo preko mejne oblike. + + Creates a Path 3D Pocket object from a face or faces + Ustvari predmet Pot 3D Ugreza iz ploskve ali ploskev @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Navpične ploskve ne oblikujejo zanke - prezri - - 3D Pocket - 3D Ugrez + + Adaptive clearing and profiling + Prilagodljivo čiščenje in profiliranje - - Creates a Path 3D Pocket object from a face or faces - Ustvari predmet Pot 3D Ugreza iz ploskve ali ploskev + + Pass Extension + Podaljšek Prehoda + + + + The distance the facing operation will extend beyond the boundary shape. + Razdalja, ki jo bo opravilo ploščenja podaljšalo preko mejne oblike. + + + + Choose how to process multiple Base Geometry features. + Izberite, kako naj se obdeluje značilnosti večih osnovnih geometrij. + + + + Final depth set below ZMin of face(s) selected. + Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev). @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Ustvari predmet Pot Ugreza iz ploskve ali ploskev - - - Adaptive clearing and profiling - Prilagodljivo čiščenje in profiliranje - - - - Final depth set below ZMin of face(s) selected. - Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev). - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profil na podlagi ploskve ali ploskev + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profil na podlagi ploskve ali ploskev - Edge Profile @@ -2189,12 +2189,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant Modes - Coolant Modes + Hladilni načini Default coolant mode. - Default coolant mode. + Privzeti hladilni način. @@ -2287,7 +2287,7 @@ If it is necessary to set the FinalDepth manually please select a different oper No parallel edges identified. - No parallel edges identified. + Razpoznanega ni nobenega vzporednega predmeta. @@ -2312,7 +2312,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Selected geometry not parallel. - Selected geometry not parallel. + Izbrana geometrija ni vporedna. @@ -2400,7 +2400,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Corrupted or incomplete specification for creating stock from base - ignoring extent - Poškodovana ali nedokončana specifikacija za ustvarjanje zaloge iz osnove - prezrt obseg + Poškodovano ali nedokončano določilo za ustvarjanje zaloge iz osnove - prezrt obseg @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,6 +2674,61 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit + + + Shape for bit shape + Shape for bit shape + + + + The parametrized body representing the tool bit + To določilovno telo predstavlja del orodja + + + + The file of the tool + The file of the tool + + + + The name of the shape file + The name of the shape file + + + + Tool bit material + Tool bit material + + + + Length offset in Z direction + Length offset in Z direction + + + + The number of flutes + Število rezil (rezkar) + + + + Chipload as per manufacturer + Chipload as per manufacturer + + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Izniči ToolBit + + + + Create ToolBit + Create ToolBit + Create Tool @@ -2709,61 +2764,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Load an existing ToolBit object from a file Load an existing ToolBit object from a file - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - - - - Shape for bit shape - Shape for bit shape - - - - The parametrized body representing the tool bit - To določilovno telo predstavlja del orodja - - - - The file of the tool - The file of the tool - - - - The name of the shape file - The name of the shape file - - - - Tool bit material - Tool bit material - - - - Length offset in Z direction - Length offset in Z direction - - - - The number of flutes - The number of flutes - - - - Chipload as per manufacturer - Chipload as per manufacturer - PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Orodje, ki ga to krmilnik uporablja - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3208,12 +3208,12 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadOut the Path - The Style of LeadOut the Path + Log izteka iz poti The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + Način Točke, Odmik polmera ali Središče @@ -3223,31 +3223,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Ustvari iz izbrane poti dodelavo vstopanja G41/G42 z nadomestnim polmerom orodja Path_DressupPathBoundary - - - The base path to modify - Osnovna pot za spremembo - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Osnovna pot za spremembo + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Ustvari dodelavo za mostičke - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Mostiček - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Ni mogoče vstaviti povezovalnih mostičkov za to pot - izberi Profilno pot + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Mostiček + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Ustvari dodelavo za mostičke + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Ni mogoče vstaviti povezovalnih mostičkov za to pot - izberi Profilno pot - Path_DressupZCorrect @@ -3529,36 +3529,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job - - - Edit Job - Uredi Opravilo - - - - Uncreate Job - Odstrani Opravilo - - - - Select Output File - Izberi Izhodno Datoteko - - - - All Files (*.*) - Vse datoteke (*.*) - - - - Model Selection - Model Selection - - - - Create Job - Ustvari Opravilo - Job @@ -3579,6 +3549,36 @@ If it is necessary to set the FinalDepth manually please select a different oper Exports Path Job as a template to be used for other jobs Izvozi Opravilo Poti kot predlogo za uporabo pri drugih opravilih + + + Create Job + Ustvari Opravilo + + + + Edit Job + Uredi Opravilo + + + + Uncreate Job + Izniči Opravilo + + + + Select Output File + Izberi Izhodno Datoteko + + + + All Files (*.*) + Vse datoteke (*.*) + + + + Model Selection + Model Selection + Path_OpActiveToggle @@ -3619,7 +3619,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Post Process the selected Job - Post Process the selected Job + Poobdelaj izbrano opravilo @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Izberi Izhodno Datoteko + + Select Probe Point File + Izberite datoteko s točkami tipala @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Vse datoteke (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Izberi Izhodno Datoteko @@ -3680,17 +3680,17 @@ If it is necessary to set the FinalDepth manually please select a different oper A Postprocessor has not been selected. - A Postprocessor has not been selected. + Poopravilnik še ni izbran. No output file is named. You'll be prompted during postprocessing. - No output file is named. You'll be prompted during postprocessing. + Nobena izhodna datoteka ni poimenovana. Za poimenovanje boste povprašani med poobdelovanjem. No active operations was found. Post processing will not result in any tooling. - No active operations was found. Post processing will not result in any tooling. + Nobenega dejavnega postopka ni bilo mogoče najti. Iz poobdelave ne boste dobili nobene obdelave. @@ -3821,7 +3821,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Probe - Probe + Tipalo @@ -5302,7 +5302,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Incremental Drill depth before retracting to clear chips - Globinski korak vrtanja pred umikom za odstranjevanje ostružkov + Globinski korak vrtanja pred umikom za odstranjevanje odrezkov @@ -5660,7 +5660,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Reorder children by dragging and dropping them to their correct location - Preuredite podrejene predmete z vlečenjem in spuščanjem na pravo mesto + Preuredite podrejenike z vlečenjem in spuščanjem na pravo mesto diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm index 9a7f190866..b4106aacda 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index 9f0613a307..f626f85ec3 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Учините Лажним, cпречите радњу да генерише код - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied Путања за умножавање + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Учините Лажним, cпречите радњу да генерише код + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Поcтавке Пројекта - - - - Tool Commands - Tool Commands - - - - New Operations - Нове Операције - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Измени - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Поcтавке Пројекта - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Нове Операције - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Cпирала + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Cпирала - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Све Датотеке (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm index 71bf383463..2089fb19d4 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index b4e214482b..395cb996ff 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - Basgeometri för den här verktygsbanan - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied The path to be copied + + + The base geometry of this toolpath + Basgeometri för den här verktygsbanan + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Ramping Method + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Ramping Method + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Projektinställning - - - - Tool Commands - Verktygskommandon - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Hjälpsamma verktyg - - - - &Path - &Bana - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Redigera - - Heights - Höjder + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Välj startpunkt + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Höjder - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Välj startpunkt + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Projektinställning - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Verktygskommandon - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Hjälpsamma verktyg + + + + &Path + &Bana + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Helix + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Helix - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Djup - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Djup + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Jobb + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Skapa jobb + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Skapa jobb - - - - Job - Jobb - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Alla filer (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm index 14908a24b8..1c7e8b9aa1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 268570dec9..4ab500bbd2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - İsteğe Bağlı veya Zorunlu Durdur programına ekleyin - - - - The base object this collision refers to - Bu çarpışmanın ifade ettiği temel nesne - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Takımın köşeler etrafında nasıl hareket ettiğini denetler. Varsayılan = Yuvarlak - - - - Maximum distance before a miter join is truncated - Bir gönyeli birleştirme öncesi azami mesafe kesiliyor - - - - The base geometry of this toolpath - Bu takım yolunun temel geometrisi - - - - Extra value to stay away from final profile- good for roughing toolpath - Son profilden uzak durmak için ekstra değer - kaba talaş işleme hatası için iyi - - - - Profile holes as well as the outline - Profil delikleri ve anahat - - - - Profile the outline - Anahattı profil haline getir - - - - Profile round holes - Profil yuvarlak delikleri - - - - Side of edge that tool should cut - Kenarın kenarı, alet kesilmelidir - - - - Make True, if using Cutter Radius Compensation - Kesici Yarıçap dengelemesi kullanıyorsanız, Gerçekleştirin - - - - Reverse direction of pocket operation. - Cep operasyonu için ters yön. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Açıyı ters çevir. Örneğin: -22.5->22.5 derece. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Bu atlama tarafından ulaşılacak nesne - - - - The Z height of the hop - Atlamanın Z yüksekliği - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Bir Başlama Noktası belirtirken Doğru yapın - - - - Incremental Drill depth before retracting to clear chips - Temiz cipslere geri çekmeden önce artımlı Matkap derinliği - - - - Enable pecking - Gagalama etkinleştirmek - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Açıyı etkinleştir - - - - Calculate the tip length and subtract from final depth - Uç uzunluğunu hesap et ve son derinlikten çıkar - - - - Controls how tool retracts Default=G98 - Takımın nasıl geri çekildiğini kontrol eder Varsayılan = G98 - - - - The height where feed starts and height during retract tool when path is finished - Yem başlama yüksekliği ve yol bittiğinde geri çekme aracı sırasında yükseklik - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fikstür Ofset Numarası - - - - Make False, to prevent operation from generating code - İşlemin kod üretmesini önlemek için Yanlış yapın - - - - Extra offset to apply to the operation. Direction is operation dependent. - İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. - - - - Start pocketing at center or boundary - Merkezi veya sınır cebe başlatmak - - - - Percent of cutter diameter to step over on each pass - Her geçide adım atacak kesici çapı yüzdesi - - - - Angle of the zigzag pattern - Zikzak deseninin açısı - - - - Clearing pattern to use - Kullanılacak temizleme deseni - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - CNC yollarının yönlendirme düzlemi - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Bir Başlama Noktası belirtirken Doğru yapın + The path to be copied Kopyalanacak yol + + + The base geometry of this toolpath + Bu takım yolunun temel geometrisi + The tool controller that will be used to calculate the path Yolu hesaplamak için kullanılacak takım denetleyicisi - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Köşe hareketi sırasında kaldırma yüksekliği - - Ramping Method - Bayiliği yöntemi + + The object to be reached by this hop + Bu atlama tarafından ulaşılacak nesne - - Which feed rate to use for ramping - Rampalama için kullanılacak besleme hızı + + The Z height of the hop + Atlamanın Z yüksekliği - - Custom feedrate - Özel ilerleme hızı + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Donanma, DonanmaBaşlangıçDerinliği üstündeki hareket komutlarını yok saymalı + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Eğimli yüzey yapısının derinliği etkinleştirildi. Bunun üzerine rampalar üretilmez, ancak hareket komutları bunun üzerinden geçer. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Desen yöntemi - - - - Shape to use for calculating Boundary - Sınırın hesaplanmasında kullanılacak şekil - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fikstür Ofset Numarası + + + + Make False, to prevent operation from generating code + İşlemin kod üretmesini önlemek için Yanlış yapın + + + + Ramping Method + Bayiliği yöntemi + + + + Which feed rate to use for ramping + Rampalama için kullanılacak besleme hızı + + + + Custom feedrate + Özel ilerleme hızı + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Donanma, DonanmaBaşlangıçDerinliği üstündeki hareket komutlarını yok saymalı + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Eğimli yüzey yapısının derinliği etkinleştirildi. Bunun üzerine rampalar üretilmez, ancak hareket komutları bunun üzerinden geçer. + + + + Incremental Drill depth before retracting to clear chips + Temiz cipslere geri çekmeden önce artımlı Matkap derinliği + + + + Enable pecking + Gagalama etkinleştirmek + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Açıyı etkinleştir + + + + Calculate the tip length and subtract from final depth + Uç uzunluğunu hesap et ve son derinlikten çıkar + + + + Controls how tool retracts Default=G98 + Takımın nasıl geri çekildiğini kontrol eder Varsayılan = G98 + + + + The height where feed starts and height during retract tool when path is finished + Yem başlama yüksekliği ve yol bittiğinde geri çekme aracı sırasında yükseklik + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Cep operasyonu için ters yön. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Açıyı ters çevir. Örneğin: -22.5->22.5 derece. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + CNC yollarının yönlendirme düzlemi + + + + Shape to use for calculating Boundary + Sınırın hesaplanmasında kullanılacak şekil + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + Bu çarpışmanın ifade ettiği temel nesne + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Merkezi veya sınır cebe başlatmak - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Her geçide adım atacak kesici çapı yüzdesi - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Zikzak deseninin açısı + + + + Clearing pattern to use + Kullanılacak temizleme deseni + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + İsteğe Bağlı veya Zorunlu Durdur programına ekleyin + + + + Pattern method + Desen yöntemi + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Takımın köşeler etrafında nasıl hareket ettiğini denetler. Varsayılan = Yuvarlak + + + + Maximum distance before a miter join is truncated + Bir gönyeli birleştirme öncesi azami mesafe kesiliyor + + + + Extra value to stay away from final profile- good for roughing toolpath + Son profilden uzak durmak için ekstra değer - kaba talaş işleme hatası için iyi + + + + Profile holes as well as the outline + Profil delikleri ve anahat + + + + Profile the outline + Anahattı profil haline getir + + + + Profile round holes + Profil yuvarlak delikleri + + + + Side of edge that tool should cut + Kenarın kenarı, alet kesilmelidir + + + + Make True, if using Cutter Radius Compensation + Kesici Yarıçap dengelemesi kullanıyorsanız, Gerçekleştirin @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Oymacılık İşlemleri - - - - 3D Operations - 3B işlemler - - - - Project Setup - Proje kurulumu - - - - Tool Commands - Aracı komutları - - - - New Operations - İşlemler - - - - Path Modification - Yol Değişikliği - - - - Helpful Tools - Yararlı araçlar - - - - &Path - Yol - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Yüzey(ler) için yol oluşturulamadı. - - - - Face appears misaligned after initial rotation. - İlk dönüşten sonra yüzeyler hizalanmadı. - - - - Consider toggling the 'InverseAngle' property and recomputing. - TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. - - - - Multiple faces in Base Geometry. - Ana geometrideki çoklu yüzler. - - - - Depth settings will be applied to all faces. - Derinlik ayarları tüm yüzeylere uygulanmış olacak. - - - - EnableRotation property is 'Off'. - DönüşüEtkinleştir özelliği 'Kapalı'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Cep (boşluk), katılaştırılmış (extrude edilmiş) yüzeye dayanmaktadır. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Cebin altı düzlemsel olmayabilir ve/veya spindle ekseni için normal değildir. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D cebin altı bu operasyon için mevcut değildir</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. - - - - Processing subs individually ... - Alt işlemler tekil olarak işleniyor... - - - - Depth Warning - Derinlik Uyarısı - - - - Verify final depth of pocket shaped by vertical faces. - Cebin son derinliğinin dikey yüzeylere göre şekillendirilmesini doğrula. - - - - Processing model as a whole ... - Model tüm ... olarak işleniyor - - - - Can not identify loop. - Döngü tanımlanamıyor. - Edit Düzenle - - Heights - Yükseklik + + %s is not a Base Model object of the job %s + %s işinde %s Temel Model nesnesi değildir - - AreaOp Operation - AreaOp işlemi + + Base shape %s already in the list + Temel şekil %s zaten listede - - Uncreate AreaOp Operation - AreaOp işlemi uncreate + + Ignoring vertex + Tepe noktasını yok say - - Pick Start Point - Hedef noktası seç + + Didn't find job %s + İş %s bulamadım + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Geçersiz Kesme kenar açı %.2f,-meli var olmak < 90° ve > = 0 ° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Kenar kesme açısı (%.2f) negatif araç ipucu uzunluğu sonuç @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s işinde %s Temel Model nesnesi değildir + + Heights + Yükseklik - - Base shape %s already in the list - Temel şekil %s zaten listede + + AreaOp Operation + AreaOp işlemi - - Ignoring vertex - Tepe noktasını yok say + + Uncreate AreaOp Operation + AreaOp işlemi uncreate + + + + Pick Start Point + Hedef noktası seç + + + + +<br>Pocket is based on extruded surface. + +<br>Cep (boşluk), katılaştırılmış (extrude edilmiş) yüzeye dayanmaktadır. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Cebin altı düzlemsel olmayabilir ve/veya spindle ekseni için normal değildir. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D cebin altı bu operasyon için mevcut değildir</i>. + + + + Face appears misaligned after initial rotation. + İlk dönüşten sonra yüzeyler hizalanmadı. + + + + Consider toggling the 'InverseAngle' property and recomputing. + TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. + + + + Multiple faces in Base Geometry. + Ana geometrideki çoklu yüzler. + + + + Depth settings will be applied to all faces. + Derinlik ayarları tüm yüzeylere uygulanmış olacak. + + + + EnableRotation property is 'Off'. + DönüşüEtkinleştir özelliği 'Kapalı'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. + + + + Processing subs individually ... + Alt işlemler tekil olarak işleniyor... + + + + Depth Warning + Derinlik Uyarısı + + + + Verify final depth of pocket shaped by vertical faces. + Cebin son derinliğinin dikey yüzeylere göre şekillendirilmesini doğrula. + + + + Processing model as a whole ... + Model tüm ... olarak işleniyor + + + + Can not identify loop. + Döngü tanımlanamıyor. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Yüzey(ler) için yol oluşturulamadı. - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Oymacılık İşlemleri - - Didn't find job %s - İş %s bulamadım + + 3D Operations + 3B işlemler - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Geçersiz Kesme kenar açı %.2f,-meli var olmak < 90° ve > = 0 ° + + Project Setup + Proje kurulumu - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Aracı komutları - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + + New Operations + İşlemler - - Cutting Edge Angle (%.2f) results in negative tool tip length - Kenar kesme açısı (%.2f) negatif araç ipucu uzunluğu sonuç + + Path Modification + Yol Değişikliği + + + + Helpful Tools + Yararlı araçlar + + + + &Path + Yol + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Ek ana nesneler kazınmış olacak - - - - The vertex index to start the path from - Yolu başlatmak için köşe endeksi - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Bir ShapeString Taslağı çevresinde bir Gravür Yolu Oluşturur + + + Additional base objects to be engraved + Ek ana nesneler kazınmış olacak + + + + The vertex index to start the path from + Yolu başlatmak için köşe endeksi + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - % s hiçbir mülkiyetine sahip değil% s (% s)) - Cannot find property %s of %s % S özellik% s bulunamadı + + + %s has no property %s (%s)) + % s hiçbir mülkiyetine sahip değil% s (% s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Helezon + + + + Creates a Path Helix object from a features of a base object + Bir temel nesnenin özelliklerinden bir Yol Sondaj nesnesi oluşturur + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Helezon - - - - Creates a Path Helix object from a features of a base object - Bir temel nesnenin özelliklerinden bir Yol Sondaj nesnesi oluşturur - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Desteklenmeyen dosya biçimi + + + + Unsupported stock type %s (%d) + Desteklenmeyen dosya biçimi) + + + + Stock not from Base bound box! + Stok temel ilişkili kutusundan değil! + + + + Stock not a box! + Stok kutusu değil! + + + + Stock not a cylinder! + Stok bir silindir değil! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Desteklenmeyen PathJob şablon sürümü% s - - - Unsupported stock object %s - Desteklenmeyen dosya biçimi - - - - Unsupported stock type %s (%d) - Desteklenmeyen dosya biçimi) - - - - Stock not from Base bound box! - Stok temel ilişkili kutusundan değil! - - - - Stock not a box! - Stok kutusu değil! - - - - Stock not a cylinder! - Stok bir silindir değil! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Tahta geometrisi - - - - Base Location - Ana konum - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth bu işlem için değiştirilemez. -FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem seçin. - - - - Depths - Derinlik - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se User Assigned Label Kullanıcı atanan etiket + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Coolant option for this operation Coolant option for this operation + + + Base Geometry + Tahta geometrisi + + + + Base Location + Ana konum + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth bu işlem için değiştirilemez. +FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem seçin. + + + + Depths + Derinlik + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D cep - - Pass Extension - Pass uzantısı - - - - The distance the facing operation will extend beyond the boundary shape. - Mesafe karşılıklı işlem sınır şekli uzatacaktır. + + Creates a Path 3D Pocket object from a face or faces + Bir yüz veya yüzlerden 3D Cep Yol nesnesi oluşturur @@ -1858,14 +1853,29 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Dikey yüzler bir döngü oluşturmaz - yoksayar - - 3D Pocket - 3D cep + + Adaptive clearing and profiling + Uyarlanabilir alan ve profil oluşturma - - Creates a Path 3D Pocket object from a face or faces - Bir yüz veya yüzlerden 3D Cep Yol nesnesi oluşturur + + Pass Extension + Pass uzantısı + + + + The distance the facing operation will extend beyond the boundary shape. + Mesafe karşılıklı işlem sınır şekli uzatacaktır. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Pocket object from a face or faces Yüz veya yüzlerden Path Pocket nesnesi oluşturur - - - Adaptive clearing and profiling - Uyarlanabilir alan ve profil oluşturma - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathProfile + + + Profile based on face or faces + Yüzey veya yüzeylere dayalı profil + Profile @@ -2020,11 +2025,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Yüzey veya yüzeylere dayalı profil - Edge Profile @@ -2435,26 +2435,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathToolController + + + Error updating TC: %s + TC güncellenirken hata oluştu:% s + The active tool @@ -2840,11 +2845,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se The tool used by this controller Bu denetleyici tarafından kullanılan araç - - - Error updating TC: %s - TC güncellenirken hata oluştu:% s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_DressupPathBoundary - - - The base path to modify - Değiştirilecek taban yolu - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Seçilen nesne bir yol değil - Create a Boundary dressup @@ -3273,6 +3253,26 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Değiştirilecek taban yolu + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Seçilen nesne bir yol değil + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Tag elbise yarat - - - - Tag Dress-up - Tag Giydirme - - - - Creates a Tag Dress-up object from a selected path - Seçilen bir yol bir Dogbone Dress-up oluşturur - - - - Please select one path object - Lütfen bir yol nesnesi seçin - - - - Create Tag Dress-up - Tag elbise yarat - - - - Holding Tag - Holding Etiketi - The base path to modify @@ -3374,6 +3339,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Factor determining the # of segments used to approximate rounded tags. Yaklaşık yuvarlak etiketler için kullanılan # parçaların etkenlerine karar verme. + + + Cannot insert holding tags for this path - please select a Profile path + Tutma etiketleri bu yol için eklenemiyor - lütfen profil yolu seçin + + + + The selected object is not a path + Seçilen nesne bir yol değil + + + + Please select a Profile object + Lütfen temel bir nesne seçin + + + + Holding Tag + Holding Etiketi + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Tag elbise yarat + + + + Tag Dress-up + Tag Giydirme + + + + Creates a Tag Dress-up object from a selected path + Seçilen bir yol bir Dogbone Dress-up oluşturur + + + + Please select one path object + Lütfen bir yol nesnesi seçin + + + + Create Tag Dress-up + Tag elbise yarat + No Base object found. @@ -3394,21 +3409,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Base Path is empty. Temel Yolu boş. - - - The selected object is not a path - Seçilen nesne bir yol değil - - - - Please select a Profile object - Lütfen temel bir nesne seçin - - - - Cannot insert holding tags for this path - please select a Profile path - Tutma etiketleri bu yol için eklenemiyor - lütfen profil yolu seçin - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Job + + + Job + Iş + + + + Creates a Path Job object + Bir nokta nesnesi oluşturur + + + + Export Template + Şablonu Dışarı Aktar + + + + Exports Path Job as a template to be used for other jobs + Yol İşini, diğer işler için kullanılacak bir şablon olarak dışa aktarır + + + + Create Job + Kopya oluştur + Edit Job @@ -3554,31 +3579,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Model Selection Model Selection - - - Create Job - Kopya oluştur - - - - Job - Iş - - - - Creates a Path Job object - Bir nokta nesnesi oluşturur - - - - Export Template - Şablonu Dışarı Aktar - - - - Exports Path Job as a template to be used for other jobs - Yol İşini, diğer işler için kullanılacak bir şablon olarak dışa aktarır - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Probe - - Select Output File - Çıkış klasörü seçin + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Tüm dosyalar (*. *) - - Select Probe Point File - Select Probe Point File + + Select Output File + Çıkış klasörü seçin diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm index 333a5adbbe..9dcba240e6 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 908f654798..54cc43ae94 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Контролює як інструмент рухається навколо кутів. Default=Round - - - - Maximum distance before a miter join is truncated - Maximum distance before a miter join is truncated - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Профіль отворів, а також контур - - - - Profile the outline - Профіль контуру - - - - Profile round holes - Профіль круглих отворів - - - - Side of edge that tool should cut - Side of edge that tool should cut - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Орієнтація площини з траєкторією ЧПК - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied Траєкторія для копіювання + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Height to raise during corner action - - Ramping Method - Метод нарощування + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - Which feed rate to use for ramping + + The Z height of the hop + The Z height of the hop - - Custom feedrate - Custom feedrate + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Pattern method - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + Метод нарощування + + + + Which feed rate to use for ramping + Which feed rate to use for ramping + + + + Custom feedrate + Custom feedrate + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Орієнтація площини з траєкторією ЧПК + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + Pattern method + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Контролює як інструмент рухається навколо кутів. Default=Round + + + + Maximum distance before a miter join is truncated + Maximum distance before a miter join is truncated + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Профіль отворів, а також контур + + + + Profile the outline + Профіль контуру + + + + Profile round holes + Профіль круглих отворів + + + + Side of edge that tool should cut + Side of edge that tool should cut + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - Project Setup - - - - Tool Commands - Команди інструментів - - - - New Operations - Нові операції - - - - Path Modification - Модифікація траєкторії - - - - Helpful Tools - Допоміжні інструменти - - - - &Path - &Траєкторія - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Правка - - Heights - Висоти + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Висоти - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + Project Setup - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Команди інструментів - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Нові операції - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Модифікація траєкторії + + + + Helpful Tools + Допоміжні інструменти + + + + &Path + &Траєкторія + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Гвинт + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Гвинт - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Базова Геометрія - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Базова Геометрія + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller The tool used by this controller - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Завдання + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Завдання - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Всі файли (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm index f6e584cab9..9bc8ecea24 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 007013292d..93d6c1be22 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Afig al programa una parada opcional o obligatòria - - - - The base object this collision refers to - L'objecte base a què es refereix aquesta interferència - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - La direcció que la trajectòria ha de seguir al voltant de la peça, sentit horari (CW) o antihorari (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Estableix el percentatge de pas, en funció del diàmetre de l'eina. - - - - Controls how tool moves around corners. Default=Round - Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó - - - - Maximum distance before a miter join is truncated - Distància màxima abans que es trunque la unió en biaix - - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - - - - Extra value to stay away from final profile- good for roughing toolpath - Valor addicional per a mantindre's a distància del perfil final, és bo per a trajectòries de desbast - - - - Profile holes as well as the outline - Perfila els forats a més del contorn - - - - Profile the outline - Perfila el contorn - - - - Profile round holes - Perfila els forats redons - - - - Side of edge that tool should cut - Costat de la vora que eina ha de tallar - - - - Make True, if using Cutter Radius Compensation - Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - - - Reverse direction of pocket operation. - Inverteix la direcció de l'operació de buidatge. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverteix l'angle. Exemple: -22,5 -> 22,5 graus. - - - - Attempt the inverse angle for face access if original rotation fails. - Intenteu l’angle invers per a l'accés a la cara si falla la rotació original. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Apliqueu la profunditat Z de la cara seleccionada com a valor més baix per a la profunditat final. S'observaran valors majors d'usuari. - - - - The object to be reached by this hop - L'objecte que s'assoleix amb aquest salt - - - - The Z height of the hop - L'alçària Z del salt - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Habilita la rotació per accedir als buidatges/zones no normals a l’eix Z. - Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Configura el patró de neteja geomètric que utilitzarà aquesta operació. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Completa l'operació en una sola passada en profunditat o en en diverses passades fins la profunditat final. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - Punt d'inici personalitzat pel camí d'aquesta operació - - - - Make True, if specifying a Start Point - Marqueu «cert», si s'especifica un punt final - - - - Incremental Drill depth before retracting to clear chips - Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa - - - - Enable pecking - Habilita les passades - - - - The time to dwell between peck cycles - Duració de la pausa entre cicles de passada - - - - Enable dwell - Habilita l'espera - - - - Calculate the tip length and subtract from final depth - Calcula la longitud de la punta i resta-la de la profunditat final - - - - Controls how tool retracts Default=G98 - Controla la manera en què l'eina es retrau. Per defecte=G98 - - - - The height where feed starts and height during retract tool when path is finished - L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat - - - - Controls how tool retracts Default=G99 - Controla la manera en què l'eina es retrau. Per defecte=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - L'alçària on s'inicia l'avanç i l'alçària durant la retracció de l'eina quan s’acaba el camí en una operació de passada - - - - How far the drill depth is extended - Fins on s’amplia la profunditat de la perforació - - - - Fixture Offset Number - Nombre de desplaçaments de la fixació - - - - Make False, to prevent operation from generating code - Marqueu «fals», per a evitar l'operació de generació de codi - - - - Extra offset to apply to the operation. Direction is operation dependent. - Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. - - - - Start pocketing at center or boundary - Comença a foradar al centre o al límit - - - - Percent of cutter diameter to step over on each pass - Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - - - Angle of the zigzag pattern - Angle del patró en zig-zag - - - - Clearing pattern to use - Patró de neteja que s'utilitza - - - - Use 3D Sorting of Path - Utilitza la distribució 3D del camí - - - - Attempts to avoid unnecessary retractions. - Intents per a evitar retraccions innecessàries. - - - - Orientation plane of CNC path - Pla d'orientació del camí CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Defineix la direcció de l'eina de tall per a escometre el material: Pujada (sentit horari) o Convencional (sentit antihorari) + + + Set the geometric clearing pattern to use for the operation. + Configura el patró de neteja geomètric que utilitzarà aquesta operació. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Estableix el desplaçament de la profunditat de l'eix Z des de la superfície objectiu. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Completa l'operació en una sola passada en profunditat o en en diverses passades fins la profunditat final. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Configura la resolució de mostreig. Els valors més xicotets augmenten ràpidament el temps de processament. + + + Set the stepover percentage, based on the tool's diameter. + Estableix el percentatge de pas, en funció del diàmetre de l'eina. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Comentari: tres buits més petits identificats a la geometria del camí. + + + The custom start point for the path of this operation + Punt d'inici personalitzat pel camí d'aquesta operació + + + + Make True, if specifying a Start Point + Marqueu «cert», si s'especifica un punt final + The path to be copied El camí que es copia + + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria + The tool controller that will be used to calculate the path El controlador d'eina que s'utilitza per a calcular el camí - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Els valors més xicotets produeixen la malla més fina i precisa. Els valors més xicotets augmenten molt el temps de processament. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Els valors més xicotets produeixen la malla més fina i precisa. Els valors més xicotets no augmenten massa el temps de processament. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Seleccioneu l'algorisme a utilitzar: OCL Dropcutter* o Experimental (no basat en OCL). - - - - Set to clear last layer in a `Multi-pass` operation. - Estableix esborrar l'última capa en una operació de "Multi-pass". - - - - Ignore outer waterlines above this height. - Ignora les línies de navegació exteriors per damunt d'aquesta alçada. - The base path to modify @@ -534,54 +269,39 @@ Alçària a què s'eleva durant l'acció de cantonada - - Ramping Method - Mètode de rampa + + The object to be reached by this hop + L'objecte que s'assoleix amb aquest salt - - Which feed rate to use for ramping - Quina velocitat d'avanç cal utilitzar per a la rampa + + The Z height of the hop + L'alçària Z del salt - - Custom feedrate - Velocitat d'avanç personalitzada + + X offset between tool and probe + Desplaçament X entre l'eina i la sonda - - Custom feed rate - Velocitat d'avanç personalitzada + + Y offset between tool and probe + Desplaçament Y entre l'eina i la sonda - - Should the dressup ignore motion commands above DressupStartDepth - Si la modificació ha d'ignorar les ordres del moviment per damunt de DressupStartDepth (Profunditat inicial de la trajectòria addicional) + + Number of points to probe in X direction + Nombre de punts per examinar en direcció X - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - La profunditat en què està habilitada la trajectòria addicional (dressup) de la rampa. Per damunt d'açò no es generen rampes, però les ordres de moviment es transmeten tal qual + + Number of points to probe in Y direction + Nombre de punts per examinar en direcció Y - - Pattern method - Mètode del patró - - - - Shape to use for calculating Boundary - Forma que s'utilitza per al càlcul del límit - - - - Clear edges of surface (Only applicable to BoundBox) - Neteja les arestes de la superfície (només s'aplica a BoundBox) - - - - Exclude milling raised areas inside the face. - Exclou les àrees elevades de fresat de la cara. + + The output location for the probe data to be written + La ubicació d'eixida que s'ha d'escriure per a les dades de la sonda @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apliqueu LeadInOut a capes dins d’una operació + + + Fixture Offset Number + Nombre de desplaçaments de la fixació + + + + Make False, to prevent operation from generating code + Marqueu «fals», per a evitar l'operació de generació de codi + + + + Ramping Method + Mètode de rampa + + + + Which feed rate to use for ramping + Quina velocitat d'avanç cal utilitzar per a la rampa + + + + Custom feedrate + Velocitat d'avanç personalitzada + + + + Custom feed rate + Velocitat d'avanç personalitzada + + + + Should the dressup ignore motion commands above DressupStartDepth + Si la modificació ha d'ignorar les ordres del moviment per damunt de DressupStartDepth (Profunditat inicial de la trajectòria addicional) + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + La profunditat en què està habilitada la trajectòria addicional (dressup) de la rampa. Per damunt d'açò no es generen rampes, però les ordres de moviment es transmeten tal qual + + + + Incremental Drill depth before retracting to clear chips + Profunditat de perforació incremental abans de retirar-se per a netejar la borumballa + + + + Enable pecking + Habilita les passades + + + + The time to dwell between peck cycles + Duració de la pausa entre cicles de passada + + + + Enable dwell + Habilita l'espera + + + + Calculate the tip length and subtract from final depth + Calcula la longitud de la punta i resta-la de la profunditat final + + + + Controls how tool retracts Default=G98 + Controla la manera en què l'eina es retrau. Per defecte=G98 + + + + The height where feed starts and height during retract tool when path is finished + L'alçària a què s'inicia l'avanç i l'alçària durant la retirada de l'eina quan el camí està finalitzat + + + + Controls how tool retracts Default=G99 + Controla la manera en què l'eina es retrau. Per defecte=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + L'alçària on s'inicia l'avanç i l'alçària durant la retracció de l'eina quan s’acaba el camí en una operació de passada + + + + How far the drill depth is extended + Fins on s’amplia la profunditat de la perforació + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Habilita la rotació per accedir als buidatges/zones no normals a l’eix Z. + + + + Reverse direction of pocket operation. + Inverteix la direcció de l'operació de buidatge. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverteix l'angle. Exemple: -22,5 -> 22,5 graus. + + + + Attempt the inverse angle for face access if original rotation fails. + Intenteu l’angle invers per a l'accés a la cara si falla la rotació original. + + + + Orientation plane of CNC path + Pla d'orientació del camí CNC + + + + Shape to use for calculating Boundary + Forma que s'utilitza per al càlcul del límit + + + + Clear edges of surface (Only applicable to BoundBox) + Neteja les arestes de la superfície (només s'aplica a BoundBox) + + + + Exclude milling raised areas inside the face. + Exclou les àrees elevades de fresat de la cara. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Els valors més xicotets produeixen la malla més fina i precisa. Els valors més xicotets augmenten molt el temps de processament. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Els valors més xicotets produeixen la malla més fina i precisa. Els valors més xicotets no augmenten massa el temps de processament. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Seleccioneu l'algorisme a utilitzar: OCL Dropcutter* o Experimental (no basat en OCL). + + + + Set to clear last layer in a `Multi-pass` operation. + Estableix esborrar l'última capa en una operació de "Multi-pass". + + + + Ignore outer waterlines above this height. + Ignora les línies de navegació exteriors per damunt d'aquesta alçada. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Apliqueu la profunditat Z de la cara seleccionada com a valor més baix per a la profunditat final. S'observaran valors majors d'usuari. + + + + The base object this collision refers to + L'objecte base a què es refereix aquesta interferència + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Processar el model i l'estoc en una operació sense la geometria base seleccionada. - - X offset between tool and probe - Desplaçament X entre l'eina i la sonda + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + La direcció que la trajectòria ha de seguir al voltant de la peça, sentit horari (CW) o antihorari (CCW) - - Y offset between tool and probe - Desplaçament Y entre l'eina i la sonda + + Extra offset to apply to the operation. Direction is operation dependent. + Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. - - Number of points to probe in X direction - Nombre de punts per examinar en direcció X + + Start pocketing at center or boundary + Comença a foradar al centre o al límit - - Number of points to probe in Y direction - Nombre de punts per examinar en direcció Y + + Percent of cutter diameter to step over on each pass + Avanç en percentatge del diàmetre de l'eina de tall en cada passada - - The output location for the probe data to be written - La ubicació d'eixida que s'ha d'escriure per a les dades de la sonda + + Angle of the zigzag pattern + Angle del patró en zig-zag + + + + Clearing pattern to use + Patró de neteja que s'utilitza + + + + Use 3D Sorting of Path + Utilitza la distribució 3D del camí + + + + Attempts to avoid unnecessary retractions. + Intents per a evitar retraccions innecessàries. + + + + Add Optional or Mandatory Stop to the program + Afig al programa una parada opcional o obligatòria + + + + Pattern method + Mètode del patró + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + + + + Maximum distance before a miter join is truncated + Distància màxima abans que es trunque la unió en biaix + + + + Extra value to stay away from final profile- good for roughing toolpath + Valor addicional per a mantindre's a distància del perfil final, és bo per a trajectòries de desbast + + + + Profile holes as well as the outline + Perfila els forats a més del contorn + + + + Profile the outline + Perfila el contorn + + + + Profile round holes + Perfila els forats redons + + + + Side of edge that tool should cut + Costat de la vora que eina ha de tallar + + + + Make True, if using Cutter Radius Compensation + Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Operacions de gravat - - - - 3D Operations - Operacions 3D - - - - Project Setup - Configuració del projecte - - - - Tool Commands - Ordres d'eina - - - - New Operations - Operacions noves - - - - Path Modification - Modificacion de camí - - - - Helpful Tools - Eines útils - - - - &Path - &Camí - - - - Path Dressup - Aspecte del camí - - - - Supplemental Commands - Ordres addicionals - - - - Unable to create path for face(s). - No es pot crear el camí per a les cares. - - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - - - - Rotated to inverse angle. - Rotat a l'angle invers. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Les funcions seleccionades requereixen «Habilita la rotació: A(x)» per a l'accés. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. - - - - -<br>Pocket is based on extruded surface. - -<br>El buidatge es basa en la superfície extrudida. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>El fons del buidatge pot ser no plana i/o no normal en l'eix del fus. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>El fons del buidatge 3D NO està disponible en aquesta operació</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Penseu a alternar la propietat InverseAngle i tornar a calcular l'operació. - - - - Processing subs individually ... - S'estan processant subs individualment... - - - - Depth Warning - Advertència de profunditat - - - - Verify final depth of pocket shaped by vertical faces. - Verifiqueu la profunditat final del buidatge format per cares verticals. - - - - Processing model as a whole ... - S'està processant el model en conjunt... - - - - Can not identify loop. - No es pot identificar el bucle. - Edit Edita - - Heights - Alçàries + + %s is not a Base Model object of the job %s + %s no és un objecte de Model base del treball %s - - AreaOp Operation - Operació AreaOp + + Base shape %s already in the list + La forma base %s ja està a la llista - - Uncreate AreaOp Operation - Elimina l'operació AreaOp + + Ignoring vertex + S'ignoren els vèrtexs - - Pick Start Point - Trieu el punt d'inici + + Didn't find job %s + No s'ha trobat la tasca %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina @@ -1133,19 +1005,127 @@ L'objecte base %s.%s rebutjat per l'operació - - %s is not a Base Model object of the job %s - %s no és un objecte de Model base del treball %s + + Heights + Alçàries - - Base shape %s already in the list - La forma base %s ja està a la llista + + AreaOp Operation + Operació AreaOp - - Ignoring vertex - S'ignoren els vèrtexs + + Uncreate AreaOp Operation + Elimina l'operació AreaOp + + + + Pick Start Point + Trieu el punt d'inici + + + + +<br>Pocket is based on extruded surface. + +<br>El buidatge es basa en la superfície extrudida. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>El fons del buidatge pot ser no plana i/o no normal en l'eix del fus. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>El fons del buidatge 3D NO està disponible en aquesta operació</i>. + + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + + + + Consider toggling the InverseAngle property and recomputing the operation. + Penseu a alternar la propietat InverseAngle i tornar a calcular l'operació. + + + + Processing subs individually ... + S'estan processant subs individualment... + + + + Depth Warning + Advertència de profunditat + + + + Verify final depth of pocket shaped by vertical faces. + Verifiqueu la profunditat final del buidatge format per cares verticals. + + + + Processing model as a whole ... + S'està processant el model en conjunt... + + + + Can not identify loop. + No es pot identificar el bucle. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + No està disponible un inici adaptatiu planar no està disponible. S’intentarà el no planar. + + + + The non-planar adaptive start is also unavailable. + L'inici adaptatiu no planar tampoc està disponible. + + + + Rotated to inverse angle. + Rotat a l'angle invers. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Les funcions seleccionades requereixen «Habilita la rotació: A(x)» per a l'accés. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. @@ -1173,39 +1153,59 @@ Selecciona sempre l'aresta inferior del forat quan s'utilitze una aresta. - - A planar adaptive start is unavailable. The non-planar will be attempted. - No està disponible un inici adaptatiu planar no està disponible. S’intentarà el no planar. + + Unable to create path for face(s). + No es pot crear el camí per a les cares. - - The non-planar adaptive start is also unavailable. - L'inici adaptatiu no planar tampoc està disponible. + + Engraving Operations + Operacions de gravat - - Didn't find job %s - No s'ha trobat la tasca %s + + 3D Operations + Operacions 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + Project Setup + Configuració del projecte - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + Tool Commands + Ordres d'eina - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + + New Operations + Operacions noves - - Cutting Edge Angle (%.2f) results in negative tool tip length - L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina + + Path Modification + Modificacion de camí + + + + Helpful Tools + Eines útils + + + + &Path + &Camí + + + + Path Dressup + Aspecte del camí + + + + Supplemental Commands + Ordres addicionals @@ -1387,16 +1387,6 @@ PathEngrave - - - Additional base objects to be engraved - Objectes de base addicionals per a gravar - - - - The vertex index to start the path from - L'índex del vèrtex en què comença el camí - Engrave @@ -1407,6 +1397,16 @@ Creates an Engraving Path around a Draft ShapeString Crea un camí gravat basat en una forma de text d'esborrany + + + Additional base objects to be engraved + Objectes de base addicionals per a gravar + + + + The vertex index to start the path from + L'índex del vèrtex en què comença el camí + PathFace @@ -1462,16 +1462,16 @@ PathGui - - - %s has no property %s (%s)) - %s no té cap propietat %s (%s)) - Cannot find property %s of %s No pot trobar la propietat %s de %s + + + %s has no property %s (%s)) + %s no té cap propietat %s (%s)) + Tool Error @@ -1490,6 +1490,16 @@ PathHelix + + + Helix + Hèlix + + + + Creates a Path Helix object from a features of a base object + Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1510,16 +1520,6 @@ Starting Radius Radi inicial - - - Helix - Hèlix - - - - Creates a Path Helix object from a features of a base object - Crea un objecte de camí helicoïdal a partir de característiques d'un objecte base - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1528,6 +1528,31 @@ PathJob + + + Unsupported stock object %s + Tipus d'objecte estoc incompatible %s + + + + Unsupported stock type %s (%d) + Incompatible el tipus d'estoc %s (%d) + + + + Stock not from Base bound box! + Estoc no des de la caixa contenidora base! + + + + Stock not a box! + L'estoc no és una caixa! + + + + Stock not a cylinder! + L'estoc no és un cilindre! + The NC output file for this project @@ -1598,31 +1623,6 @@ Unsupported PathJob template version %s Incompatible la plantilla PathJob versió %s - - - Unsupported stock object %s - Tipus d'objecte estoc incompatible %s - - - - Unsupported stock type %s (%d) - Incompatible el tipus d'estoc %s (%d) - - - - Stock not from Base bound box! - Estoc no des de la caixa contenidora base! - - - - Stock not a box! - L'estoc no és una caixa! - - - - Stock not a cylinder! - L'estoc no és un cilindre! - Solids @@ -1666,43 +1666,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Estimació del temps del cicle d'operacions - - - - Base Geometry - Geometria de base - - - - Base Location - Posició de base - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - Aquesta operació no pot modificar la profunditat final. -Si és necessari establir la profunditat final de forma manual, seleccioneu una operació diferent. - - - - Depths - Profunditats - - - - Operation - Operació - The base geometry for this operation @@ -1748,6 +1711,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una User Assigned Label Etiqueta assignada a l'usuari + + + Operations Cycle Time Estimation + Estimació del temps del cicle d'operacions + Base locations for this operation @@ -1813,6 +1781,38 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Coolant option for this operation Opció de refrigeració per a aquesta operació + + + Base Geometry + Geometria de base + + + + Base Location + Posició de base + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + Aquesta operació no pot modificar la profunditat final. +Si és necessari establir la profunditat final de forma manual, seleccioneu una operació diferent. + + + + Depths + Profunditats + + + + Operation + Operació + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1825,19 +1825,14 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket - - Choose how to process multiple Base Geometry features. - Trieu com processar diverses propietats de Geometria base. + + 3D Pocket + Buidat 3D - - Pass Extension - Extensió de la passada - - - - The distance the facing operation will extend beyond the boundary shape. - La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. + + Creates a Path 3D Pocket object from a face or faces + Crea un objecte Trajectòria de buidat 3D des d'una cara o cares @@ -1855,14 +1850,29 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Las cares verticals no formen un bucle - ignora - - 3D Pocket - Buidat 3D + + Adaptive clearing and profiling + Perfil i neteja adaptatius - - Creates a Path 3D Pocket object from a face or faces - Crea un objecte Trajectòria de buidat 3D des d'una cara o cares + + Pass Extension + Extensió de la passada + + + + The distance the facing operation will extend beyond the boundary shape. + La distància de l'operació de generació de cares s'estendrà més enllà de la forma límit. + + + + Choose how to process multiple Base Geometry features. + Trieu com processar diverses propietats de Geometria base. + + + + Final depth set below ZMin of face(s) selected. + Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. @@ -1889,16 +1899,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Pocket object from a face or faces Crea un objecte de Trajectòria de buidatge des d'una o vàries cares - - - Adaptive clearing and profiling - Perfil i neteja adaptatius - - - - Final depth set below ZMin of face(s) selected. - Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - Generating toolpath with libarea offsets. @@ -1946,6 +1946,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathProfile + + + Profile based on face or faces + Perfil basat en una o més cares + Profile @@ -2016,11 +2021,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Perfil basat en una o més cares - Edge Profile @@ -2426,26 +2426,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2551,6 +2531,26 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2661,56 +2661,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathToolBit - - - Create Tool - Crea l'eina - - - - Creates a new ToolBit object - Crea un objecte Broca d'eina nou - - - - Save Tool as... - Anomena i guarda l'eina... - - - - Save Tool - Guarda l'eina - - - - Save an existing ToolBit object to a file - Guarda un objecte Broca de l'eina existent en un fitxer - - - - Load Tool - Carrega l'eina - - - - Load an existing ToolBit object from a file - Carrega un objecte Broca d'eina existent des d'un fitxer - - - - Edit ToolBit - Edita la broca de l'eina - - - - Uncreate ToolBit - No s'ha creat la broca de l'eina - - - - Create ToolBit - Crea la broca de l'eina - Shape for bit shape @@ -2751,6 +2701,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Chipload as per manufacturer Avanç per dent segons el fabricant + + + Edit ToolBit + Edita la broca de l'eina + + + + Uncreate ToolBit + No s'ha creat la broca de l'eina + + + + Create ToolBit + Crea la broca de l'eina + + + + Create Tool + Crea l'eina + + + + Creates a new ToolBit object + Crea un objecte Broca d'eina nou + + + + Save Tool as... + Anomena i guarda l'eina... + + + + Save Tool + Guarda l'eina + + + + Save an existing ToolBit object to a file + Guarda un objecte Broca de l'eina existent en un fitxer + + + + Load Tool + Carrega l'eina + + + + Load an existing ToolBit object from a file + Carrega un objecte Broca d'eina existent des d'un fitxer + PathToolBitLibrary @@ -2777,6 +2777,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathToolController + + + Error updating TC: %s + Error d'actualització TC: %s + The active tool @@ -2827,11 +2832,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una The tool used by this controller L'eina utilitzada per aquest controlador - - - Error updating TC: %s - Error d'actualització TC: %s - PathToolLibraryManager @@ -3213,26 +3213,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_DressupPathBoundary - - - The base path to modify - El camí de base que es modifica - - - - Solid object to be used to limit the generated Path. - Objecte sòlid que s'utilitzarà per a limitar el camí generat. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determina si el límit descriu una màscara d’inclusió o d'exclusió. - - - - The selected object is not a path - L'objecte seleccionat no és un camí - Create a Boundary dressup @@ -3258,6 +3238,26 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Path Boundary Dress-up Crea una modificació limitada de camí + + + The base path to modify + El camí de base que es modifica + + + + Solid object to be used to limit the generated Path. + Objecte sòlid que s'utilitzarà per a limitar el camí generat. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determina si el límit descriu una màscara d’inclusió o d'exclusió. + + + + The selected object is not a path + L'objecte seleccionat no és un camí + Path_DressupRampEntry @@ -3284,41 +3284,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_DressupTag - - - Cannot copy tags - internal error - No es poden copiar etiquetes - s'ha produït un error intern - - - - Create a Tag dressup - Crea un aspecte d'etiqueta - - - - Tag Dress-up - Aspecte d'etiqueta - - - - Creates a Tag Dress-up object from a selected path - Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat - - - - Please select one path object - Seleccioneu un objecte de tipus camí - - - - Create Tag Dress-up - Crea un aspecte d'etiqueta - - - - Holding Tag - Etiquetes de subjecció - The base path to modify @@ -3359,6 +3324,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Factor determining the # of segments used to approximate rounded tags. Factor que determina els # de segments utilitzats per a aproximar etiquetes arredonides. + + + Cannot insert holding tags for this path - please select a Profile path + No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí + + + + The selected object is not a path + L'objecte seleccionat no és un camí + + + + Please select a Profile object + Seleccioneu un objecte perfil + + + + Holding Tag + Etiquetes de subjecció + + + + Cannot copy tags - internal error + No es poden copiar etiquetes - s'ha produït un error intern + + + + Create a Tag dressup + Crea un aspecte d'etiqueta + + + + Tag Dress-up + Aspecte d'etiqueta + + + + Creates a Tag Dress-up object from a selected path + Crea un objecte de tipus aspecte d'etiqueta a partir d'un camí seleccionat + + + + Please select one path object + Seleccioneu un objecte de tipus camí + + + + Create Tag Dress-up + Crea un aspecte d'etiqueta + No Base object found. @@ -3379,21 +3394,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Base Path is empty. El camí base és buit. - - - The selected object is not a path - L'objecte seleccionat no és un camí - - - - Please select a Profile object - Seleccioneu un objecte perfil - - - - Cannot insert holding tags for this path - please select a Profile path - No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí - Path_DressupZCorrect @@ -3513,6 +3513,31 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Job + + + Job + Tasca + + + + Creates a Path Job object + Crea un objecte de tipus tasca de camí + + + + Export Template + Exporta la plantilla + + + + Exports Path Job as a template to be used for other jobs + Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques + + + + Create Job + Crea una tasca + Edit Job @@ -3538,31 +3563,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Model Selection Selecció del model - - - Create Job - Crea una tasca - - - - Job - Tasca - - - - Creates a Path Job object - Crea un objecte de tipus tasca de camí - - - - Export Template - Exporta la plantilla - - - - Exports Path Job as a template to be used for other jobs - Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques - Path_OpActiveToggle @@ -3622,9 +3622,9 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Probe - - Select Output File - Seleccioneu el fitxer d'eixida + + Select Probe Point File + Seleccioneu el fitxer de punt de sonda @@ -3632,9 +3632,9 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Tots els fitxers (*.*) - - Select Probe Point File - Seleccioneu el fitxer de punt de sonda + + Select Output File + Seleccioneu el fitxer d'eixida diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm index 5f3c0dd1b3..7cb627af94 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index 842f46b4a0..c76b32a5fe 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Thêm Dừng tùy chọn hoặc bắt buộc vào chương trình - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - Kiểm soát cách công cụ di chuyển xung quanh các góc. Mặc định=Vòng - - - - Maximum distance before a miter join is truncated - Khoảng cách tối đa trước khi khớp nối bị cắt ngắn - - - - The base geometry of this toolpath - Hình dạng cơ sở của đường chạy dao này - - - - Extra value to stay away from final profile- good for roughing toolpath - Giá trị bổ sung để tránh xa cấu hình cuối cùng - tốt cho đường chạy dao gia công thô - - - - Profile holes as well as the outline - Làm nghiêng các lỗ cũng như bề mặt - - - - Profile the outline - Làm nghiêng bề mặt - - - - Profile round holes - Làm nghiêng xung quanh các lỗ - - - - Side of edge that tool should cut - Phía của cạnh mà công cụ đó nên cắt - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - Các đối tượng để đạt được bằng bước nhảy này - - - - The Z height of the hop - Chiều cao Z của bước nhảy - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Thực hiện đúng, nếu chỉ định điểm đầu - - - - Incremental Drill depth before retracting to clear chips - Độ sâu khoan gia tăng trước khi rút lại để làm sạch chỗ sứt mẻ - - - - Enable pecking - Bật chế độ đục khoét - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - Chiều cao nơi nguồn cấp dữ liệu bắt đầu và chiều cao trong công cụ rút lại khi đường dẫn hoàn tất - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Số lượng Offset cố định - - - - Make False, to prevent operation from generating code - Làm Sai, để ngăn chặn hoạt động tạo mã - - - - Extra offset to apply to the operation. Direction is operation dependent. - Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. - - - - Start pocketing at center or boundary - Bắt đầu tạo túi ở phần trung tâm hoặc ranh giới - - - - Percent of cutter diameter to step over on each pass - Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền - - - - Angle of the zigzag pattern - Góc của mẫu zigzag - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Mặt phẳng định hướng của đường CNC - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Thực hiện đúng, nếu chỉ định điểm đầu + The path to be copied Đường dẫn cần được sao chép + + + The base geometry of this toolpath + Hình dạng cơ sở của đường chạy dao này + The tool controller that will be used to calculate the path Bộ điều khiển công cụ sẽ được sử dụng để tính toán đường dẫn - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ Chiều cao tăng trong khi thực hiện các thao tác góc - - Ramping Method - Phương pháp tạo dốc + + The object to be reached by this hop + Các đối tượng để đạt được bằng bước nhảy này - - Which feed rate to use for ramping - Cái mà có tỷ lệ cung cấp chất liệu để tạo dốc + + The Z height of the hop + Chiều cao Z của bước nhảy - - Custom feedrate - Tỷ lệ cung cấp chất liệu tùy chỉnh + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - Độ sâu nơi trang phục đoạn đường dốc được cho phép. Phía trên các đường dốc này không được tạo ra, nhưng các lệnh chuyển động được truyền qua. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - Phương thức mẫu - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Số lượng Offset cố định + + + + Make False, to prevent operation from generating code + Làm Sai, để ngăn chặn hoạt động tạo mã + + + + Ramping Method + Phương pháp tạo dốc + + + + Which feed rate to use for ramping + Cái mà có tỷ lệ cung cấp chất liệu để tạo dốc + + + + Custom feedrate + Tỷ lệ cung cấp chất liệu tùy chỉnh + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Độ sâu nơi trang phục đoạn đường dốc được cho phép. Phía trên các đường dốc này không được tạo ra, nhưng các lệnh chuyển động được truyền qua. + + + + Incremental Drill depth before retracting to clear chips + Độ sâu khoan gia tăng trước khi rút lại để làm sạch chỗ sứt mẻ + + + + Enable pecking + Bật chế độ đục khoét + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + Chiều cao nơi nguồn cấp dữ liệu bắt đầu và chiều cao trong công cụ rút lại khi đường dẫn hoàn tất + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Mặt phẳng định hướng của đường CNC + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Bắt đầu tạo túi ở phần trung tâm hoặc ranh giới - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Góc của mẫu zigzag + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Thêm Dừng tùy chọn hoặc bắt buộc vào chương trình + + + + Pattern method + Phương thức mẫu + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + Kiểm soát cách công cụ di chuyển xung quanh các góc. Mặc định=Vòng + + + + Maximum distance before a miter join is truncated + Khoảng cách tối đa trước khi khớp nối bị cắt ngắn + + + + Extra value to stay away from final profile- good for roughing toolpath + Giá trị bổ sung để tránh xa cấu hình cuối cùng - tốt cho đường chạy dao gia công thô + + + + Profile holes as well as the outline + Làm nghiêng các lỗ cũng như bề mặt + + + + Profile the outline + Làm nghiêng bề mặt + + + + Profile round holes + Làm nghiêng xung quanh các lỗ + + + + Side of edge that tool should cut + Phía của cạnh mà công cụ đó nên cắt + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - Hoạt động 3D - - - - Project Setup - Thiết lập dự án - - - - Tool Commands - Lệnh công cụ - - - - New Operations - Hoạt động mới - - - - Path Modification - Sửa đổi đường dẫn - - - - Helpful Tools - Công cụ hữu ích - - - - &Path - &Đường dẫn - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit Chỉnh sửa - - Heights - Chiều cao + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - Hoạt động AreaOp + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Hủy tạo Hoạt động AreaOp + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Chọn điểm đầu + + Didn't find job %s + Không tìm được công việc %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Góc cắt cạnh không hợp lệ %.2f, phải là <90° và >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Góc cắt cạnh (%.2f) dẫn đến độ dài đầu công cụ âm @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Chiều cao - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + Hoạt động AreaOp - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Hủy tạo Hoạt động AreaOp + + + + Pick Start Point + Chọn điểm đầu + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Không tìm được công việc %s + + 3D Operations + Hoạt động 3D - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Góc cắt cạnh không hợp lệ %.2f, phải là <90° và >=0° + + Project Setup + Thiết lập dự án - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Lệnh công cụ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + Hoạt động mới - - Cutting Edge Angle (%.2f) results in negative tool tip length - Góc cắt cạnh (%.2f) dẫn đến độ dài đầu công cụ âm + + Path Modification + Sửa đổi đường dẫn + + + + Helpful Tools + Công cụ hữu ích + + + + &Path + &Đường dẫn + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - Chỉ số đỉnh để bắt đầu đường dẫn từ - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Tạo đường dẫn khắc xung quanh một bản phác họa khắc tạo hình + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + Chỉ số đỉnh để bắt đầu đường dẫn từ + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s không có thuộc tính %s (%s)) - Cannot find property %s of %s Không thể tìm thấy thuộc tính %s của %s + + + %s has no property %s (%s)) + %s không có thuộc tính %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + Xoắn ốc + + + + Creates a Path Helix object from a features of a base object + Tạo đối tượng Đường xoắn ốc từ thành phần của một đối tượng cơ sở + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - Xoắn ốc - - - - Creates a Path Helix object from a features of a base object - Tạo đối tượng Đường xoắn ốc từ thành phần của một đối tượng cơ sở - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Đối tượng dự trữ không được hỗ trợ %s + + + + Unsupported stock type %s (%d) + Loại hàng dự trữ không được hỗ trợ %s (%d) + + + + Stock not from Base bound box! + Hàng dự trữ không phải từ trong hộp! + + + + Stock not a box! + Hàng dự trữ không phải là một hộp! + + + + Stock not a cylinder! + Hàng dự trữ không phải là một hình trụ! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Phiên bản mẫu PathJob không được hỗ trợ %s - - - Unsupported stock object %s - Đối tượng dự trữ không được hỗ trợ %s - - - - Unsupported stock type %s (%d) - Loại hàng dự trữ không được hỗ trợ %s (%d) - - - - Stock not from Base bound box! - Hàng dự trữ không phải từ trong hộp! - - - - Stock not a box! - Hàng dự trữ không phải là một hộp! - - - - Stock not a cylinder! - Hàng dự trữ không phải là một hình trụ! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Hình học cơ sở - - - - Base Location - Vị trí ban đầu - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Độ sâu - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label Nhãn được gán cho người dùng + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Hình học cơ sở + + + + Base Location + Vị trí ban đầu + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Độ sâu + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + Túi 3D - - Pass Extension - Đường dẫn mở rộng - - - - The distance the facing operation will extend beyond the boundary shape. - Khoảng cách thao tác tạo mặt sẽ vượt ra ngoài hình dạng biên. + + Creates a Path 3D Pocket object from a face or faces + Tạo một đối tượng Đường dẫn túi 3D từ một hoặc nhiều mặt @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Các mặt thẳng đứng không tạo thành vòng lặp - bỏ qua - - 3D Pocket - Túi 3D + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Tạo một đối tượng Đường dẫn túi 3D từ một hoặc nhiều mặt + + Pass Extension + Đường dẫn mở rộng + + + + The distance the facing operation will extend beyond the boundary shape. + Khoảng cách thao tác tạo mặt sẽ vượt ra ngoài hình dạng biên. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Lỗi khi cập nhật TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller Công cụ được sử dụng bởi bộ điều khiển này - - - Error updating TC: %s - Lỗi khi cập nhật TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - Đường cơ sở để sửa đổi - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - Đối tượng được chọn không phải là đường dẫn - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + Đường cơ sở để sửa đổi + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + Đối tượng được chọn không phải là đường dẫn + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Tạo một kết cấu Thẻ - - - - Tag Dress-up - Kết cấu Thẻ - - - - Creates a Tag Dress-up object from a selected path - Tạo một đối tượng kết cấu Thẻ từ một đường dẫn đã chọn - - - - Please select one path object - Vui lòng chọn một đối tượng đường dẫn - - - - Create Tag Dress-up - Tạo kết cấu Thẻ - - - - Holding Tag - Thẻ giữ - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + Đối tượng được chọn không phải là đường dẫn + + + + Please select a Profile object + Hãy chọn một đối tượng cấu hình + + + + Holding Tag + Thẻ giữ + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Tạo một kết cấu Thẻ + + + + Tag Dress-up + Kết cấu Thẻ + + + + Creates a Tag Dress-up object from a selected path + Tạo một đối tượng kết cấu Thẻ từ một đường dẫn đã chọn + + + + Please select one path object + Vui lòng chọn một đối tượng đường dẫn + + + + Create Tag Dress-up + Tạo kết cấu Thẻ + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Đường dẫn cơ sở trống. - - - The selected object is not a path - Đối tượng được chọn không phải là đường dẫn - - - - Please select a Profile object - Hãy chọn một đối tượng cấu hình - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Công việc + + + + Creates a Path Job object + Tạo một đối tượng Đường dẫn Công việc + + + + Export Template + Xuất bản mẫu + + + + Exports Path Job as a template to be used for other jobs + Xuất Công việc Đường dẫn như là một mẫu được sử dụng cho các công việc khác + + + + Create Job + Tạo Công việc + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Tạo Công việc - - - - Job - Công việc - - - - Creates a Path Job object - Tạo một đối tượng Đường dẫn Công việc - - - - Export Template - Xuất bản mẫu - - - - Exports Path Job as a template to be used for other jobs - Xuất Công việc Đường dẫn như là một mẫu được sử dụng cho các công việc khác - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Chọn tệp đầu ra + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Tất cả các tệp (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Chọn tệp đầu ra diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm index fcd3d6a67a..673f52e7ab 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index 81c2b76321..06ddc25120 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - 向程序添加可选或强制停止 - - - - The base object this collision refers to - 引起此冲突的基础对象 - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - 控制工具如何在拐角处移动。默认值 = 圆 - - - - Maximum distance before a miter join is truncated - 截断斜接之前的最大距离 - - - - The base geometry of this toolpath - 此工具路径的基础几何形状 - - - - Extra value to stay away from final profile- good for roughing toolpath - 用以与最终轮廓保持距离的余量 - 适合粗加工工具路径 - - - - Profile holes as well as the outline - 轮廓铣孔及外轮廓 - - - - Profile the outline - 轮廓铣外形 - - - - Profile round holes - 轮廓铣圆孔 - - - - Side of edge that tool should cut - 工具所应该裁剪的边 - - - - Make True, if using Cutter Radius Compensation - 如果使用刀具半径补偿, 则为 True - - - - Reverse direction of pocket operation. - 反转凹槽操作方向。 - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - 反转角度。示例: -22.5 -> 22.5 度。 - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - 此跃点所达到的对象 - - - - The Z height of the hop - 跃点的 Z 高度 - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - 如果指定起始点, 则为 True - - - - Incremental Drill depth before retracting to clear chips - 缩回以清除切屑前的钻孔深度增量 - - - - Enable pecking - 启用啄钻 - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - 启用驻留 - - - - Calculate the tip length and subtract from final depth - 计算提示长度并从最后深度中减去 - - - - Controls how tool retracts Default=G98 - 控制工具如何缩回, 默认G98 - - - - The height where feed starts and height during retract tool when path is finished - 进给开始的高度和当路径完成时撤回工具的高度 - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - 夹具偏移数 - - - - Make False, to prevent operation from generating code - 使假，以防止生成代码操作 - - - - Extra offset to apply to the operation. Direction is operation dependent. - 要应用于操作的额外偏移量。方向与操作相关。 - - - - Start pocketing at center or boundary - 在中心或边界开始隐藏 - - - - Percent of cutter diameter to step over on each pass - 路径彼此相对于刀具直径重叠率 - - - - Angle of the zigzag pattern - 之字形刀轨的角度 - - - - Clearing pattern to use - 要使用的清理模式 - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - CNC路径方向平面 - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + 如果指定起始点, 则为 True + The path to be copied 要复制的路径 + + + The base geometry of this toolpath + 此工具路径的基础几何形状 + The tool controller that will be used to calculate the path 用于计算刀轨的刀具控制器 - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ 拐角动作时升高的高度 - - Ramping Method - 斜向法 + + The object to be reached by this hop + 此跃点所达到的对象 - - Which feed rate to use for ramping - 用于斜切的进给速率 + + The Z height of the hop + 跃点的 Z 高度 - - Custom feedrate - 自定义进给率 + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - 图案加工 - - - - Shape to use for calculating Boundary - 用于计算边界的形状 - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + 夹具偏移数 + + + + Make False, to prevent operation from generating code + 使假，以防止生成代码操作 + + + + Ramping Method + 斜向法 + + + + Which feed rate to use for ramping + 用于斜切的进给速率 + + + + Custom feedrate + 自定义进给率 + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + Incremental Drill depth before retracting to clear chips + 缩回以清除切屑前的钻孔深度增量 + + + + Enable pecking + 启用啄钻 + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + 启用驻留 + + + + Calculate the tip length and subtract from final depth + 计算提示长度并从最后深度中减去 + + + + Controls how tool retracts Default=G98 + 控制工具如何缩回, 默认G98 + + + + The height where feed starts and height during retract tool when path is finished + 进给开始的高度和当路径完成时撤回工具的高度 + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + 反转凹槽操作方向。 + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + 反转角度。示例: -22.5 -> 22.5 度。 + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + CNC路径方向平面 + + + + Shape to use for calculating Boundary + 用于计算边界的形状 + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + 引起此冲突的基础对象 + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + 要应用于操作的额外偏移量。方向与操作相关。 - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + 在中心或边界开始隐藏 - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + 路径彼此相对于刀具直径重叠率 - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + 之字形刀轨的角度 + + + + Clearing pattern to use + 要使用的清理模式 + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + 向程序添加可选或强制停止 + + + + Pattern method + 图案加工 + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + 控制工具如何在拐角处移动。默认值 = 圆 + + + + Maximum distance before a miter join is truncated + 截断斜接之前的最大距离 + + + + Extra value to stay away from final profile- good for roughing toolpath + 用以与最终轮廓保持距离的余量 - 适合粗加工工具路径 + + + + Profile holes as well as the outline + 轮廓铣孔及外轮廓 + + + + Profile the outline + 轮廓铣外形 + + + + Profile round holes + 轮廓铣圆孔 + + + + Side of edge that tool should cut + 工具所应该裁剪的边 + + + + Make True, if using Cutter Radius Compensation + 如果使用刀具半径补偿, 则为 True @@ -894,178 +894,50 @@ Path - - - Engraving Operations - 雕刻作业 - - - - 3D Operations - 3维操作 - - - - Project Setup - 项目创建 - - - - Tool Commands - 工具命令 - - - - New Operations - 新建操作 - - - - Path Modification - 路径修改 - - - - Helpful Tools - 有用的工具 - - - - &Path - &路径 - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - 深度警告 - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - 将模型作为整体处理 - - - - Can not identify loop. - 无法识别回路。 - Edit 编辑 - - Heights - 高度 + + %s is not a Base Model object of the job %s + %s 不是作业的 %s 的基本模型对象 - - AreaOp Operation - AreaOp 操作 + + Base shape %s already in the list + 基础形状 %s 已经在列表中 - - Uncreate AreaOp Operation - 不创造 AreaOp 操作 + + Ignoring vertex + 忽略顶点 - - Pick Start Point - 选取起点 + + Didn't find job %s + 找不到作业 %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + 无效的切削角, 此角度必须小于90°且大于或等于 0 ° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + 切削角导致工具的提示长度为负值 @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s 不是作业的 %s 的基本模型对象 + + Heights + 高度 - - Base shape %s already in the list - 基础形状 %s 已经在列表中 + + AreaOp Operation + AreaOp 操作 - - Ignoring vertex - 忽略顶点 + + Uncreate AreaOp Operation + 不创造 AreaOp 操作 + + + + Pick Start Point + 选取起点 + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + 深度警告 + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + 将模型作为整体处理 + + + + Can not identify loop. + 无法识别回路。 + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + 雕刻作业 - - Didn't find job %s - 找不到作业 %s + + 3D Operations + 3维操作 - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - 无效的切削角, 此角度必须小于90°且大于或等于 0 ° + + Project Setup + 项目创建 - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + 工具命令 - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° + + New Operations + 新建操作 - - Cutting Edge Angle (%.2f) results in negative tool tip length - 切削角导致工具的提示长度为负值 + + Path Modification + 路径修改 + + + + Helpful Tools + 有用的工具 + + + + &Path + &路径 + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - 要从其中启动路径的顶点索引。 - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString 在草稿 ShapeString 周围创建雕刻路径 + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + 要从其中启动路径的顶点索引。 + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s 没有特性 %s (%s)) - Cannot find property %s of %s 找不到%s 的属性%s + + + %s has no property %s (%s)) + %s 没有特性 %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + 螺旋体 + + + + Creates a Path Helix object from a features of a base object + 从基对象的特征创建路径螺旋线对象 + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - 螺旋体 - - - - Creates a Path Helix object from a features of a base object - 从基对象的特征创建路径螺旋线对象 - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + 不受支持的工件对象%s + + + + Unsupported stock type %s (%d) + 不支持的工件类型 %s (%d) + + + + Stock not from Base bound box! + 工件不是来自于基础物件外框! + + + + Stock not a box! + 工件不是一个长方体! + + + + Stock not a cylinder! + 工件不是一个圆柱体! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s 不支持的路径作业模板版本%s - - - Unsupported stock object %s - 不受支持的工件对象%s - - - - Unsupported stock type %s (%d) - 不支持的工件类型 %s (%d) - - - - Stock not from Base bound box! - 工件不是来自于基础物件外框! - - - - Stock not a box! - 工件不是一个长方体! - - - - Stock not a cylinder! - 工件不是一个圆柱体! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - 基本几何图形 - - - - Base Location - 基位置 - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - 深度 - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label 用户指定的标签 + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + 基本几何图形 + + + + Base Location + 基位置 + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + 深度 + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D 口袋 - - Pass Extension - 传递扩展 - - - - The distance the facing operation will extend beyond the boundary shape. - 所面临的操作将延伸到超出边界形状的距离。 + + Creates a Path 3D Pocket object from a face or faces + 从面或多面创建一个3D口袋对象路径 @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper 垂直面没有形成回路 - 忽略 - - 3D Pocket - 3D 口袋 + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - 从面或多面创建一个3D口袋对象路径 + + Pass Extension + 传递扩展 + + + + The distance the facing operation will extend beyond the boundary shape. + 所面临的操作将延伸到超出边界形状的距离。 + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces 从一个或多个面创建一个路径口袋对象 - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + 工具另存为... + + + + Save Tool + 保存工具 + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + 加载工具 + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + 更新 TC 时出错: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller 此控制器使用的工具 - - - Error updating TC: %s - 更新 TC 时出错: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - 要修改的基路径 - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - 所选对象不是路径 - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + 要修改的基路径 + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + 所选对象不是路径 + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - 创建一个标签修整 - - - - Tag Dress-up - 标签修整 - - - - Creates a Tag Dress-up object from a selected path - 从所选路径创建标签修整 - - - - Please select one path object - 请选择一个路径对象 - - - - Create Tag Dress-up - 创建标签修整 - - - - Holding Tag - 保留标记 - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + 所选对象不是路径 + + + + Please select a Profile object + 请选择一个轮廓对象 + + + + Holding Tag + 保留标记 + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + 创建一个标签修整 + + + + Tag Dress-up + 标签修整 + + + + Creates a Tag Dress-up object from a selected path + 从所选路径创建标签修整 + + + + Please select one path object + 请选择一个路径对象 + + + + Create Tag Dress-up + 创建标签修整 + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. 基本路径为空。 - - - The selected object is not a path - 所选对象不是路径 - - - - Please select a Profile object - 请选择一个轮廓对象 - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + 作业 + + + + Creates a Path Job object + 创建路径作业对象 + + + + Export Template + 导出模板 + + + + Exports Path Job as a template to be used for other jobs + 将路径作业导出为用于其他作业的模板 + + + + Create Job + 创建作业 + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - 创建作业 - - - - Job - 作业 - - - - Creates a Path Job object - 创建路径作业对象 - - - - Export Template - 导出模板 - - - - Exports Path Job as a template to be used for other jobs - 将路径作业导出为用于其他作业的模板 - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - 选择输出文件 + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper 所有文件(*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + 选择输出文件 diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm index 2a3234273d..e13de8f052 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 845bf93962..4b0a085a13 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -3,281 +3,11 @@ App::Property - - - Add Optional or Mandatory Stop to the program - Add Optional or Mandatory Stop to the program - - - - The base object this collision refers to - The base object this collision refers to - - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - Extend the profile clearing beyond the Extra Offset. - Extend the profile clearing beyond the Extra Offset. - - - - Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. - - - - Controls how tool moves around corners. Default=Round - 控制工具將如何移動角。預設為圈 - - - - Maximum distance before a miter join is truncated - 斜切下的最大距離已被截斷 - - - - The base geometry of this toolpath - The base geometry of this toolpath - - - - Extra value to stay away from final profile- good for roughing toolpath - Extra value to stay away from final profile- good for roughing toolpath - - - - Profile holes as well as the outline - Profile holes as well as the outline - - - - Profile the outline - Profile the outline - - - - Profile round holes - Profile round holes - - - - Side of edge that tool should cut - 刀具應切除邊之一側 - - - - Make True, if using Cutter Radius Compensation - Make True, if using Cutter Radius Compensation - - - - Reverse direction of pocket operation. - Reverse direction of pocket operation. - - - - Inverse the angle. Example: -22.5 -> 22.5 degrees. - Inverse the angle. Example: -22.5 -> 22.5 degrees. - - - - Attempt the inverse angle for face access if original rotation fails. - Attempt the inverse angle for face access if original rotation fails. - - - - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. - - - - The object to be reached by this hop - The object to be reached by this hop - - - - The Z height of the hop - The Z height of the hop - - - - Enable rotation to gain access to pockets/areas not normal to Z axis. - Enable rotation to gain access to pockets/areas not normal to Z axis. - Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Enter custom start point for slot path. - Enter custom start point for slot path. - - - - Enter custom end point for slot path. - Enter custom end point for slot path. - - - - Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. - - - - Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. - - - - Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. - - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - - - Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. - - - - Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. - - - - Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. - - - - For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. - - - - Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. - - - - The custom start point for the path of this operation - The custom start point for the path of this operation - - - - Make True, if specifying a Start Point - Make True, if specifying a Start Point - - - - Incremental Drill depth before retracting to clear chips - Incremental Drill depth before retracting to clear chips - - - - Enable pecking - Enable pecking - - - - The time to dwell between peck cycles - The time to dwell between peck cycles - - - - Enable dwell - Enable dwell - - - - Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth - - - - Controls how tool retracts Default=G98 - Controls how tool retracts Default=G98 - - - - The height where feed starts and height during retract tool when path is finished - The height where feed starts and height during retract tool when path is finished - - - - Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 - - - - The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation - - - - How far the drill depth is extended - How far the drill depth is extended - - - - Fixture Offset Number - Fixture Offset Number - - - - Make False, to prevent operation from generating code - Make False, to prevent operation from generating code - - - - Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. - - - - Start pocketing at center or boundary - Start pocketing at center or boundary - - - - Percent of cutter diameter to step over on each pass - Percent of cutter diameter to step over on each pass - - - - Angle of the zigzag pattern - Angle of the zigzag pattern - - - - Clearing pattern to use - Clearing pattern to use - - - - Use 3D Sorting of Path - Use 3D Sorting of Path - - - - Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. - - - - Orientation plane of CNC path - Orientation plane of CNC path - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -418,6 +148,11 @@ Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + + Set the geometric clearing pattern to use for the operation. + Set the geometric clearing pattern to use for the operation. + The yaw angle used for certain clearing patterns @@ -433,6 +168,11 @@ Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Set the start point for the cut pattern. @@ -453,6 +193,11 @@ Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. + + + Set the stepover percentage, based on the tool's diameter. + Set the stepover percentage, based on the tool's diameter. + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. @@ -478,41 +223,31 @@ Feedback: three smallest gaps identified in the path geometry. Feedback: three smallest gaps identified in the path geometry. + + + The custom start point for the path of this operation + The custom start point for the path of this operation + + + + Make True, if specifying a Start Point + Make True, if specifying a Start Point + The path to be copied 要複製之路徑 + + + The base geometry of this toolpath + The base geometry of this toolpath + The tool controller that will be used to calculate the path 此工具控制器將用於計算軌跡 - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. - - - - Ignore outer waterlines above this height. - Ignore outer waterlines above this height. - The base path to modify @@ -534,54 +269,39 @@ 在角中提高高度 - - Ramping Method - 製造傾斜表面 + + The object to be reached by this hop + The object to be reached by this hop - - Which feed rate to use for ramping - 使用哪種進給速度製造傾斜表面 + + The Z height of the hop + The Z height of the hop - - Custom feedrate - 自訂進給速度 + + X offset between tool and probe + X offset between tool and probe - - Custom feed rate - Custom feed rate + + Y offset between tool and probe + Y offset between tool and probe - - Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + + Number of points to probe in X direction + Number of points to probe in X direction - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - 裝飾斜面的深度已啟用。位於斜面上方的沒有生成，但是動態指令將照原樣通過。 + + Number of points to probe in Y direction + Number of points to probe in Y direction - - Pattern method - 圖樣方式 - - - - Shape to use for calculating Boundary - Shape to use for calculating Boundary - - - - Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) - - - - Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + + The output location for the probe data to be written + The output location for the probe data to be written @@ -628,6 +348,216 @@ Apply LeadInOut to layers within an operation Apply LeadInOut to layers within an operation + + + Fixture Offset Number + Fixture Offset Number + + + + Make False, to prevent operation from generating code + Make False, to prevent operation from generating code + + + + Ramping Method + 製造傾斜表面 + + + + Which feed rate to use for ramping + 使用哪種進給速度製造傾斜表面 + + + + Custom feedrate + 自訂進給速度 + + + + Custom feed rate + Custom feed rate + + + + Should the dressup ignore motion commands above DressupStartDepth + Should the dressup ignore motion commands above DressupStartDepth + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + 裝飾斜面的深度已啟用。位於斜面上方的沒有生成，但是動態指令將照原樣通過。 + + + + Incremental Drill depth before retracting to clear chips + Incremental Drill depth before retracting to clear chips + + + + Enable pecking + Enable pecking + + + + The time to dwell between peck cycles + The time to dwell between peck cycles + + + + Enable dwell + Enable dwell + + + + Calculate the tip length and subtract from final depth + Calculate the tip length and subtract from final depth + + + + Controls how tool retracts Default=G98 + Controls how tool retracts Default=G98 + + + + The height where feed starts and height during retract tool when path is finished + The height where feed starts and height during retract tool when path is finished + + + + Controls how tool retracts Default=G99 + Controls how tool retracts Default=G99 + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + How far the drill depth is extended + How far the drill depth is extended + + + + Enable rotation to gain access to pockets/areas not normal to Z axis. + Enable rotation to gain access to pockets/areas not normal to Z axis. + + + + Reverse direction of pocket operation. + Reverse direction of pocket operation. + + + + Inverse the angle. Example: -22.5 -> 22.5 degrees. + Inverse the angle. Example: -22.5 -> 22.5 degrees. + + + + Attempt the inverse angle for face access if original rotation fails. + Attempt the inverse angle for face access if original rotation fails. + + + + Orientation plane of CNC path + Orientation plane of CNC path + + + + Shape to use for calculating Boundary + Shape to use for calculating Boundary + + + + Clear edges of surface (Only applicable to BoundBox) + Clear edges of surface (Only applicable to BoundBox) + + + + Exclude milling raised areas inside the face. + Exclude milling raised areas inside the face. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + Set to clear last layer in a `Multi-pass` operation. + Set to clear last layer in a `Multi-pass` operation. + + + + Ignore outer waterlines above this height. + Ignore outer waterlines above this height. + + + + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed. + + + + The base object this collision refers to + The base object this collision refers to + + + + Enter custom start point for slot path. + Enter custom start point for slot path. + + + + Enter custom end point for slot path. + Enter custom end point for slot path. + + + + Positive extends the beginning of the path, negative shortens. + Positive extends the beginning of the path, negative shortens. + + + + Positive extends the end of the path, negative shortens. + Positive extends the end of the path, negative shortens. + + + + Choose the path orientation with regard to the feature(s) selected. + Choose the path orientation with regard to the feature(s) selected. + + + + Choose what point to use on the first selected feature. + Choose what point to use on the first selected feature. + + + + Choose what point to use on the second selected feature. + Choose what point to use on the second selected feature. + + + + For arcs/circlular edges, offset the radius for the path. + For arcs/circlular edges, offset the radius for the path. + + + + Enable to reverse the cut direction of the slot path. + Enable to reverse the cut direction of the slot path. + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -644,29 +574,99 @@ Process the model and stock in an operation with no Base Geometry selected. - - X offset between tool and probe - X offset between tool and probe + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - Y offset between tool and probe - Y offset between tool and probe + + Extra offset to apply to the operation. Direction is operation dependent. + Extra offset to apply to the operation. Direction is operation dependent. - - Number of points to probe in X direction - Number of points to probe in X direction + + Start pocketing at center or boundary + Start pocketing at center or boundary - - Number of points to probe in Y direction - Number of points to probe in Y direction + + Percent of cutter diameter to step over on each pass + Percent of cutter diameter to step over on each pass - - The output location for the probe data to be written - The output location for the probe data to be written + + Angle of the zigzag pattern + Angle of the zigzag pattern + + + + Clearing pattern to use + Clearing pattern to use + + + + Use 3D Sorting of Path + Use 3D Sorting of Path + + + + Attempts to avoid unnecessary retractions. + Attempts to avoid unnecessary retractions. + + + + Add Optional or Mandatory Stop to the program + Add Optional or Mandatory Stop to the program + + + + Pattern method + 圖樣方式 + + + + Extend the profile clearing beyond the Extra Offset. + Extend the profile clearing beyond the Extra Offset. + + + + Controls how tool moves around corners. Default=Round + 控制工具將如何移動角。預設為圈 + + + + Maximum distance before a miter join is truncated + 斜切下的最大距離已被截斷 + + + + Extra value to stay away from final profile- good for roughing toolpath + Extra value to stay away from final profile- good for roughing toolpath + + + + Profile holes as well as the outline + Profile holes as well as the outline + + + + Profile the outline + Profile the outline + + + + Profile round holes + Profile round holes + + + + Side of edge that tool should cut + 刀具應切除邊之一側 + + + + Make True, if using Cutter Radius Compensation + Make True, if using Cutter Radius Compensation @@ -894,178 +894,50 @@ Path - - - Engraving Operations - Engraving Operations - - - - 3D Operations - 3D Operations - - - - Project Setup - 專案建立 - - - - Tool Commands - Tool Commands - - - - New Operations - New Operations - - - - Path Modification - Path Modification - - - - Helpful Tools - Helpful Tools - - - - &Path - &Path - - - - Path Dressup - Path Dressup - - - - Supplemental Commands - Supplemental Commands - - - - Unable to create path for face(s). - Unable to create path for face(s). - - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - - - - Rotated to inverse angle. - Rotated to inverse angle. - - - - Selected feature(s) require 'Enable Rotation: A(x)' for access. - Selected feature(s) require 'Enable Rotation: A(x)' for access. - - - - Selected feature(s) require 'Enable Rotation: B(y)' for access. - Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - - -<br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. - - - - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - - - - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - -<br> -<br><i>3D pocket bottom is NOT available in this operation</i>. - - - - Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. - - - - Processing subs individually ... - Processing subs individually ... - - - - Depth Warning - Depth Warning - - - - Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. - - - - Processing model as a whole ... - Processing model as a whole ... - - - - Can not identify loop. - Can not identify loop. - Edit 編輯 - - Heights - Heights + + %s is not a Base Model object of the job %s + %s is not a Base Model object of the job %s - - AreaOp Operation - AreaOp Operation + + Base shape %s already in the list + Base shape %s already in the list - - Uncreate AreaOp Operation - Uncreate AreaOp Operation + + Ignoring vertex + Ignoring vertex - - Pick Start Point - Pick Start Point + + Didn't find job %s + Didn't find job %s + + + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1133,19 +1005,127 @@ Base object %s.%s rejected by operation - - %s is not a Base Model object of the job %s - %s is not a Base Model object of the job %s + + Heights + Heights - - Base shape %s already in the list - Base shape %s already in the list + + AreaOp Operation + AreaOp Operation - - Ignoring vertex - Ignoring vertex + + Uncreate AreaOp Operation + Uncreate AreaOp Operation + + + + Pick Start Point + Pick Start Point + + + + +<br>Pocket is based on extruded surface. + +<br>Pocket is based on extruded surface. + + + + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + + + + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + +<br> +<br><i>3D pocket bottom is NOT available in this operation</i>. + + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + + + + Consider toggling the InverseAngle property and recomputing the operation. + Consider toggling the InverseAngle property and recomputing the operation. + + + + Processing subs individually ... + Processing subs individually ... + + + + Depth Warning + Depth Warning + + + + Verify final depth of pocket shaped by vertical faces. + Verify final depth of pocket shaped by vertical faces. + + + + Processing model as a whole ... + Processing model as a whole ... + + + + Can not identify loop. + Can not identify loop. + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + The non-planar adaptive start is also unavailable. + The non-planar adaptive start is also unavailable. + + + + Rotated to inverse angle. + Rotated to inverse angle. + + + + Selected feature(s) require 'Enable Rotation: A(x)' for access. + Selected feature(s) require 'Enable Rotation: A(x)' for access. + + + + Selected feature(s) require 'Enable Rotation: B(y)' for access. + Selected feature(s) require 'Enable Rotation: B(y)' for access. @@ -1173,39 +1153,59 @@ Always select the bottom edge of the hole when using an edge. - - A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + + Unable to create path for face(s). + Unable to create path for face(s). - - The non-planar adaptive start is also unavailable. - The non-planar adaptive start is also unavailable. + + Engraving Operations + Engraving Operations - - Didn't find job %s - Didn't find job %s + + 3D Operations + 3D Operations - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Project Setup + 專案建立 - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Tool Commands + Tool Commands - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + New Operations + New Operations - - Cutting Edge Angle (%.2f) results in negative tool tip length - Cutting Edge Angle (%.2f) results in negative tool tip length + + Path Modification + Path Modification + + + + Helpful Tools + Helpful Tools + + + + &Path + &Path + + + + Path Dressup + Path Dressup + + + + Supplemental Commands + Supplemental Commands @@ -1389,16 +1389,6 @@ PathEngrave - - - Additional base objects to be engraved - Additional base objects to be engraved - - - - The vertex index to start the path from - The vertex index to start the path from - Engrave @@ -1409,6 +1399,16 @@ Creates an Engraving Path around a Draft ShapeString Creates an Engraving Path around a Draft ShapeString + + + Additional base objects to be engraved + Additional base objects to be engraved + + + + The vertex index to start the path from + The vertex index to start the path from + PathFace @@ -1465,16 +1465,16 @@ PathGui - - - %s has no property %s (%s)) - %s has no property %s (%s)) - Cannot find property %s of %s Cannot find property %s of %s + + + %s has no property %s (%s)) + %s has no property %s (%s)) + Tool Error @@ -1493,6 +1493,16 @@ PathHelix + + + Helix + 螺旋 + + + + Creates a Path Helix object from a features of a base object + Creates a Path Helix object from a features of a base object + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1513,16 +1523,6 @@ Starting Radius Starting Radius - - - Helix - 螺旋 - - - - Creates a Path Helix object from a features of a base object - Creates a Path Helix object from a features of a base object - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1531,6 +1531,31 @@ PathJob + + + Unsupported stock object %s + Unsupported stock object %s + + + + Unsupported stock type %s (%d) + Unsupported stock type %s (%d) + + + + Stock not from Base bound box! + Stock not from Base bound box! + + + + Stock not a box! + Stock not a box! + + + + Stock not a cylinder! + Stock not a cylinder! + The NC output file for this project @@ -1601,31 +1626,6 @@ Unsupported PathJob template version %s Unsupported PathJob template version %s - - - Unsupported stock object %s - Unsupported stock object %s - - - - Unsupported stock type %s (%d) - Unsupported stock type %s (%d) - - - - Stock not from Base bound box! - Stock not from Base bound box! - - - - Stock not a box! - Stock not a box! - - - - Stock not a cylinder! - Stock not a cylinder! - Solids @@ -1669,43 +1669,6 @@ PathOp - - - Job Cycle Time Estimation - Job Cycle Time Estimation - - - - Operations Cycle Time Estimation - Operations Cycle Time Estimation - - - - Base Geometry - Base Geometry - - - - Base Location - Base Location - - - - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. - - - - Depths - Depths - - - - Operation - Operation - The base geometry for this operation @@ -1751,6 +1714,11 @@ If it is necessary to set the FinalDepth manually please select a different oper User Assigned Label User Assigned Label + + + Operations Cycle Time Estimation + Operations Cycle Time Estimation + Base locations for this operation @@ -1816,6 +1784,38 @@ If it is necessary to set the FinalDepth manually please select a different oper Coolant option for this operation Coolant option for this operation + + + Base Geometry + Base Geometry + + + + Base Location + Base Location + + + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths + Depths + + + + Operation + Operation + + + + Job Cycle Time Estimation + Job Cycle Time Estimation + PathOpGui @@ -1828,19 +1828,14 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket - - Choose how to process multiple Base Geometry features. - Choose how to process multiple Base Geometry features. + + 3D Pocket + 3D Pocket - - Pass Extension - Pass Extension - - - - The distance the facing operation will extend beyond the boundary shape. - The distance the facing operation will extend beyond the boundary shape. + + Creates a Path 3D Pocket object from a face or faces + Creates a Path 3D Pocket object from a face or faces @@ -1858,14 +1853,29 @@ If it is necessary to set the FinalDepth manually please select a different oper Vertical faces do not form a loop - ignoring - - 3D Pocket - 3D Pocket + + Adaptive clearing and profiling + Adaptive clearing and profiling - - Creates a Path 3D Pocket object from a face or faces - Creates a Path 3D Pocket object from a face or faces + + Pass Extension + Pass Extension + + + + The distance the facing operation will extend beyond the boundary shape. + The distance the facing operation will extend beyond the boundary shape. + + + + Choose how to process multiple Base Geometry features. + Choose how to process multiple Base Geometry features. + + + + Final depth set below ZMin of face(s) selected. + Final depth set below ZMin of face(s) selected. @@ -1892,16 +1902,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces Creates a Path Pocket object from a face or faces - - - Adaptive clearing and profiling - Adaptive clearing and profiling - - - - Final depth set below ZMin of face(s) selected. - Final depth set below ZMin of face(s) selected. - Generating toolpath with libarea offsets. @@ -1950,6 +1950,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Profile based on face or faces + Profile based on face or faces + Profile @@ -2020,11 +2025,6 @@ If it is necessary to set the FinalDepth manually please select a different oper For open edges, verify Final Depth for this operation. For open edges, verify Final Depth for this operation. - - - Profile based on face or faces - Profile based on face or faces - Edge Profile @@ -2435,26 +2435,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathSurface - - - Failed to identify tool for operation. - Failed to identify tool for operation. - - - - Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. - - - - Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. - - - - OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. - This operation requires OpenCamLib to be installed. @@ -2560,6 +2540,26 @@ If it is necessary to set the FinalDepth manually please select a different oper No scan data to convert to Gcode. No scan data to convert to Gcode. + + + Failed to identify tool for operation. + Failed to identify tool for operation. + + + + Failed to map selected tool to an OCL tool type. + Failed to map selected tool to an OCL tool type. + + + + Failed to translate active tool to OCL tool type. + Failed to translate active tool to OCL tool type. + + + + OCL tool not available. Cannot determine is cutter has tilt available. + OCL tool not available. Cannot determine is cutter has tilt available. + Hold on. This might take a minute. @@ -2674,56 +2674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolBit - - - Create Tool - Create Tool - - - - Creates a new ToolBit object - Creates a new ToolBit object - - - - Save Tool as... - Save Tool as... - - - - Save Tool - Save Tool - - - - Save an existing ToolBit object to a file - Save an existing ToolBit object to a file - - - - Load Tool - Load Tool - - - - Load an existing ToolBit object from a file - Load an existing ToolBit object from a file - - - - Edit ToolBit - Edit ToolBit - - - - Uncreate ToolBit - Uncreate ToolBit - - - - Create ToolBit - Create ToolBit - Shape for bit shape @@ -2764,6 +2714,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Chipload as per manufacturer Chipload as per manufacturer + + + Edit ToolBit + Edit ToolBit + + + + Uncreate ToolBit + Uncreate ToolBit + + + + Create ToolBit + Create ToolBit + + + + Create Tool + Create Tool + + + + Creates a new ToolBit object + Creates a new ToolBit object + + + + Save Tool as... + Save Tool as... + + + + Save Tool + Save Tool + + + + Save an existing ToolBit object to a file + Save an existing ToolBit object to a file + + + + Load Tool + Load Tool + + + + Load an existing ToolBit object from a file + Load an existing ToolBit object from a file + PathToolBitLibrary @@ -2790,6 +2790,11 @@ If it is necessary to set the FinalDepth manually please select a different oper PathToolController + + + Error updating TC: %s + Error updating TC: %s + The active tool @@ -2840,11 +2845,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The tool used by this controller 該工具用於此控制器 - - - Error updating TC: %s - Error updating TC: %s - PathToolLibraryManager @@ -3228,26 +3228,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupPathBoundary - - - The base path to modify - The base path to modify - - - - Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. - - - - Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. - - - - The selected object is not a path - The selected object is not a path - Create a Boundary dressup @@ -3273,6 +3253,26 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up Create Path Boundary Dress-up + + + The base path to modify + The base path to modify + + + + Solid object to be used to limit the generated Path. + Solid object to be used to limit the generated Path. + + + + Determines if Boundary describes an inclusion or exclusion mask. + Determines if Boundary describes an inclusion or exclusion mask. + + + + The selected object is not a path + The selected object is not a path + Path_DressupRampEntry @@ -3299,41 +3299,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupTag - - - Cannot copy tags - internal error - Cannot copy tags - internal error - - - - Create a Tag dressup - Create a Tag dressup - - - - Tag Dress-up - Tag Dress-up - - - - Creates a Tag Dress-up object from a selected path - Creates a Tag Dress-up object from a selected path - - - - Please select one path object - Please select one path object - - - - Create Tag Dress-up - Create Tag Dress-up - - - - Holding Tag - Holding Tag - The base path to modify @@ -3374,6 +3339,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. + + + Cannot insert holding tags for this path - please select a Profile path + Cannot insert holding tags for this path - please select a Profile path + + + + The selected object is not a path + The selected object is not a path + + + + Please select a Profile object + Please select a Profile object + + + + Holding Tag + Holding Tag + + + + Cannot copy tags - internal error + Cannot copy tags - internal error + + + + Create a Tag dressup + Create a Tag dressup + + + + Tag Dress-up + Tag Dress-up + + + + Creates a Tag Dress-up object from a selected path + Creates a Tag Dress-up object from a selected path + + + + Please select one path object + Please select one path object + + + + Create Tag Dress-up + Create Tag Dress-up + No Base object found. @@ -3394,21 +3409,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Base Path is empty. Base Path is empty. - - - The selected object is not a path - The selected object is not a path - - - - Please select a Profile object - Please select a Profile object - - - - Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path - Path_DressupZCorrect @@ -3529,6 +3529,31 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Job + + + Job + Job + + + + Creates a Path Job object + Creates a Path Job object + + + + Export Template + Export Template + + + + Exports Path Job as a template to be used for other jobs + Exports Path Job as a template to be used for other jobs + + + + Create Job + Create Job + Edit Job @@ -3554,31 +3579,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection Model Selection - - - Create Job - Create Job - - - - Job - Job - - - - Creates a Path Job object - Creates a Path Job object - - - - Export Template - Export Template - - - - Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs - Path_OpActiveToggle @@ -3638,9 +3638,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Probe - - Select Output File - Select Output File + + Select Probe Point File + Select Probe Point File @@ -3648,9 +3648,9 @@ If it is necessary to set the FinalDepth manually please select a different oper 所有檔 (*.*) - - Select Probe Point File - Select Probe Point File + + Select Output File + Select Output File diff --git a/src/Mod/Plot/resources/translations/Plot_af.qm b/src/Mod/Plot/resources/translations/Plot_af.qm index 0e98d7c10d..299d295e05 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_af.qm and b/src/Mod/Plot/resources/translations/Plot_af.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ar.qm b/src/Mod/Plot/resources/translations/Plot_ar.qm index 9badb93394..eb51ae0df2 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ar.qm and b/src/Mod/Plot/resources/translations/Plot_ar.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ca.qm b/src/Mod/Plot/resources/translations/Plot_ca.qm index 567c79b2d9..49142965a5 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ca.qm and b/src/Mod/Plot/resources/translations/Plot_ca.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_cs.qm b/src/Mod/Plot/resources/translations/Plot_cs.qm index 47bb331af5..df2c36331d 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_cs.qm and b/src/Mod/Plot/resources/translations/Plot_cs.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_de.qm b/src/Mod/Plot/resources/translations/Plot_de.qm index 6f1f4510f1..6e7b20b701 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_de.qm and b/src/Mod/Plot/resources/translations/Plot_de.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_el.qm b/src/Mod/Plot/resources/translations/Plot_el.qm index cf79053a28..215c8d950d 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_el.qm and b/src/Mod/Plot/resources/translations/Plot_el.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_es-ES.qm b/src/Mod/Plot/resources/translations/Plot_es-ES.qm index 5c3f610813..0b5a27dbdd 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_es-ES.qm and b/src/Mod/Plot/resources/translations/Plot_es-ES.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_eu.qm b/src/Mod/Plot/resources/translations/Plot_eu.qm index 351e38bc17..890780c3c0 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_eu.qm and b/src/Mod/Plot/resources/translations/Plot_eu.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_fi.qm b/src/Mod/Plot/resources/translations/Plot_fi.qm index ca141f7654..491dbbe77b 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_fi.qm and b/src/Mod/Plot/resources/translations/Plot_fi.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_fil.qm b/src/Mod/Plot/resources/translations/Plot_fil.qm index 54cb62d9ea..7535ce968e 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_fil.qm and b/src/Mod/Plot/resources/translations/Plot_fil.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_fr.qm b/src/Mod/Plot/resources/translations/Plot_fr.qm index b4c11b5016..631420d334 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_fr.qm and b/src/Mod/Plot/resources/translations/Plot_fr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_gl.qm b/src/Mod/Plot/resources/translations/Plot_gl.qm index fa308fc0e8..86aa62dc5b 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_gl.qm and b/src/Mod/Plot/resources/translations/Plot_gl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_hr.qm b/src/Mod/Plot/resources/translations/Plot_hr.qm index 545f015984..887160ec3c 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_hr.qm and b/src/Mod/Plot/resources/translations/Plot_hr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_hu.qm b/src/Mod/Plot/resources/translations/Plot_hu.qm index faba2c8738..61288133a4 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_hu.qm and b/src/Mod/Plot/resources/translations/Plot_hu.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_id.qm b/src/Mod/Plot/resources/translations/Plot_id.qm index 96656d1022..1333a7b073 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_id.qm and b/src/Mod/Plot/resources/translations/Plot_id.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_it.qm b/src/Mod/Plot/resources/translations/Plot_it.qm index 514b4a2348..31a5805fda 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_it.qm and b/src/Mod/Plot/resources/translations/Plot_it.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ja.qm b/src/Mod/Plot/resources/translations/Plot_ja.qm index 56ba012a75..8007b799ba 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ja.qm and b/src/Mod/Plot/resources/translations/Plot_ja.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_kab.qm b/src/Mod/Plot/resources/translations/Plot_kab.qm index f0516b3566..0647d3e39a 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_kab.qm and b/src/Mod/Plot/resources/translations/Plot_kab.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ko.qm b/src/Mod/Plot/resources/translations/Plot_ko.qm index 09d7de2b67..51cd2cf5ea 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ko.qm and b/src/Mod/Plot/resources/translations/Plot_ko.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_lt.qm b/src/Mod/Plot/resources/translations/Plot_lt.qm index 0e2b1994fa..af3a0e87ab 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_lt.qm and b/src/Mod/Plot/resources/translations/Plot_lt.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_nl.qm b/src/Mod/Plot/resources/translations/Plot_nl.qm index 6e07a620b1..544d079640 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_nl.qm and b/src/Mod/Plot/resources/translations/Plot_nl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_no.qm b/src/Mod/Plot/resources/translations/Plot_no.qm index 7fa7e48646..1f86c804ab 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_no.qm and b/src/Mod/Plot/resources/translations/Plot_no.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_pl.qm b/src/Mod/Plot/resources/translations/Plot_pl.qm index d6f3b8cdc4..4e51a4b70e 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_pl.qm and b/src/Mod/Plot/resources/translations/Plot_pl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_pl.ts b/src/Mod/Plot/resources/translations/Plot_pl.ts index 952a455231..3d6b564c13 100644 --- a/src/Mod/Plot/resources/translations/Plot_pl.ts +++ b/src/Mod/Plot/resources/translations/Plot_pl.ts @@ -120,7 +120,7 @@ Apply to all axes - Zastosuj do wszystkich osi + Zastosuj dla wszystkich osi diff --git a/src/Mod/Plot/resources/translations/Plot_pt-BR.qm b/src/Mod/Plot/resources/translations/Plot_pt-BR.qm index dce24b65de..357e8b873d 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_pt-BR.qm and b/src/Mod/Plot/resources/translations/Plot_pt-BR.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_pt-PT.qm b/src/Mod/Plot/resources/translations/Plot_pt-PT.qm index 133942486d..9e0acc4dcb 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_pt-PT.qm and b/src/Mod/Plot/resources/translations/Plot_pt-PT.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ro.qm b/src/Mod/Plot/resources/translations/Plot_ro.qm index b98a636b02..cc959f699e 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ro.qm and b/src/Mod/Plot/resources/translations/Plot_ro.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ru.qm b/src/Mod/Plot/resources/translations/Plot_ru.qm index 2aee4d63ed..90dce85e00 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ru.qm and b/src/Mod/Plot/resources/translations/Plot_ru.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sk.qm b/src/Mod/Plot/resources/translations/Plot_sk.qm index d4232b83b1..6404e86c2a 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_sk.qm and b/src/Mod/Plot/resources/translations/Plot_sk.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sl.qm b/src/Mod/Plot/resources/translations/Plot_sl.qm index 009b1fe6bb..7a616edfc0 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_sl.qm and b/src/Mod/Plot/resources/translations/Plot_sl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sr.qm b/src/Mod/Plot/resources/translations/Plot_sr.qm index b04295f444..19c25f8f49 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_sr.qm and b/src/Mod/Plot/resources/translations/Plot_sr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sv-SE.qm b/src/Mod/Plot/resources/translations/Plot_sv-SE.qm index a62e281f8a..de26d408b9 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_sv-SE.qm and b/src/Mod/Plot/resources/translations/Plot_sv-SE.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_tr.qm b/src/Mod/Plot/resources/translations/Plot_tr.qm index 1c445ce3b4..b849b55f12 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_tr.qm and b/src/Mod/Plot/resources/translations/Plot_tr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_uk.qm b/src/Mod/Plot/resources/translations/Plot_uk.qm index 9f89aefb20..8995709e03 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_uk.qm and b/src/Mod/Plot/resources/translations/Plot_uk.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_val-ES.qm b/src/Mod/Plot/resources/translations/Plot_val-ES.qm index 803cdb532a..87edcf3c84 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_val-ES.qm and b/src/Mod/Plot/resources/translations/Plot_val-ES.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_vi.qm b/src/Mod/Plot/resources/translations/Plot_vi.qm index e9908496b5..85f0b6ebb2 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_vi.qm and b/src/Mod/Plot/resources/translations/Plot_vi.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_zh-CN.qm b/src/Mod/Plot/resources/translations/Plot_zh-CN.qm index ca0a7160fe..92c3a33130 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_zh-CN.qm and b/src/Mod/Plot/resources/translations/Plot_zh-CN.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_zh-TW.qm b/src/Mod/Plot/resources/translations/Plot_zh-TW.qm index 22b4be9bfd..44fc6675b4 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_zh-TW.qm and b/src/Mod/Plot/resources/translations/Plot_zh-TW.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_af.qm b/src/Mod/Points/Gui/Resources/translations/Points_af.qm index 0eac2f0faa..5bbe40d453 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_af.qm and b/src/Mod/Points/Gui/Resources/translations/Points_af.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ar.qm b/src/Mod/Points/Gui/Resources/translations/Points_ar.qm index ed6c69cbcb..573c67c0ac 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ar.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ar.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ca.qm b/src/Mod/Points/Gui/Resources/translations/Points_ca.qm index cfcbcf46a7..96fa162795 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ca.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ca.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_cs.qm b/src/Mod/Points/Gui/Resources/translations/Points_cs.qm index 54dec28fad..5f2aab4a25 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_cs.qm and b/src/Mod/Points/Gui/Resources/translations/Points_cs.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_de.qm b/src/Mod/Points/Gui/Resources/translations/Points_de.qm index 674426d9a7..d4c7b41f74 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_de.qm and b/src/Mod/Points/Gui/Resources/translations/Points_de.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_el.qm b/src/Mod/Points/Gui/Resources/translations/Points_el.qm index 7e5622f769..2bf9f9603b 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_el.qm and b/src/Mod/Points/Gui/Resources/translations/Points_el.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_es-ES.qm b/src/Mod/Points/Gui/Resources/translations/Points_es-ES.qm index f9fb2d1129..736b4d8aa0 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_es-ES.qm and b/src/Mod/Points/Gui/Resources/translations/Points_es-ES.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_eu.qm b/src/Mod/Points/Gui/Resources/translations/Points_eu.qm index 4687863e0f..1a4496026f 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_eu.qm and b/src/Mod/Points/Gui/Resources/translations/Points_eu.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fi.qm b/src/Mod/Points/Gui/Resources/translations/Points_fi.qm index 65ea2f94c9..554d1f34b4 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_fi.qm and b/src/Mod/Points/Gui/Resources/translations/Points_fi.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fi.ts b/src/Mod/Points/Gui/Resources/translations/Points_fi.ts index a987eb55ab..e6f27833d6 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_fi.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_fi.ts @@ -17,7 +17,7 @@ Convert to points - Convert to points + Muunna pisteiksi @@ -68,13 +68,13 @@ Merge point clouds - Merge point clouds + Yhdistä pistepilvet Merge several point clouds into one - Merge several point clouds into one + Yhdistä useita pistepilviä yhdeksi @@ -301,7 +301,7 @@ Enter maximum distance: - Enter maximum distance: + Syötä enimmäisetäisyys: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fil.qm b/src/Mod/Points/Gui/Resources/translations/Points_fil.qm index 427fd4b8a3..e25b4fbe4c 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_fil.qm and b/src/Mod/Points/Gui/Resources/translations/Points_fil.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fr.qm b/src/Mod/Points/Gui/Resources/translations/Points_fr.qm index 7fcc50b279..e695001da7 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_fr.qm and b/src/Mod/Points/Gui/Resources/translations/Points_fr.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_gl.qm b/src/Mod/Points/Gui/Resources/translations/Points_gl.qm index 9cd3058a58..198765cdcf 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_gl.qm and b/src/Mod/Points/Gui/Resources/translations/Points_gl.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_hr.qm b/src/Mod/Points/Gui/Resources/translations/Points_hr.qm index c843c44a0f..2a279d65ab 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_hr.qm and b/src/Mod/Points/Gui/Resources/translations/Points_hr.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_hu.qm b/src/Mod/Points/Gui/Resources/translations/Points_hu.qm index af827d682a..a5ae539b8f 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_hu.qm and b/src/Mod/Points/Gui/Resources/translations/Points_hu.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_hu.ts b/src/Mod/Points/Gui/Resources/translations/Points_hu.ts index 1d26e1f3ec..2145b57c7d 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_hu.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_hu.ts @@ -106,13 +106,13 @@ Structured point cloud - Structured point cloud + Strukturált pontfelhő Convert points to structured point cloud - Convert points to structured point cloud + Pontok strukturált pontfelhővé alakítása diff --git a/src/Mod/Points/Gui/Resources/translations/Points_id.qm b/src/Mod/Points/Gui/Resources/translations/Points_id.qm index 9fcd32f17c..c00dda3e0a 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_id.qm and b/src/Mod/Points/Gui/Resources/translations/Points_id.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_it.qm b/src/Mod/Points/Gui/Resources/translations/Points_it.qm index 7f3ecafc0c..a60ef4461c 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_it.qm and b/src/Mod/Points/Gui/Resources/translations/Points_it.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ja.qm b/src/Mod/Points/Gui/Resources/translations/Points_ja.qm index e570f3bc92..035271ef50 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ja.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ja.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_kab.qm b/src/Mod/Points/Gui/Resources/translations/Points_kab.qm index 7374357907..f148690495 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_kab.qm and b/src/Mod/Points/Gui/Resources/translations/Points_kab.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ko.qm b/src/Mod/Points/Gui/Resources/translations/Points_ko.qm index 829aef2f12..7b46dd77ea 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ko.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ko.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_lt.qm b/src/Mod/Points/Gui/Resources/translations/Points_lt.qm index f01a4e55b2..4ab727373e 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_lt.qm and b/src/Mod/Points/Gui/Resources/translations/Points_lt.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_nl.qm b/src/Mod/Points/Gui/Resources/translations/Points_nl.qm index 5035fe8f91..6f04e0ba94 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_nl.qm and b/src/Mod/Points/Gui/Resources/translations/Points_nl.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_no.qm b/src/Mod/Points/Gui/Resources/translations/Points_no.qm index 611d96cfc9..2a74c2c911 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_no.qm and b/src/Mod/Points/Gui/Resources/translations/Points_no.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pl.qm b/src/Mod/Points/Gui/Resources/translations/Points_pl.qm index a19560f826..cdf81c41fb 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_pl.qm and b/src/Mod/Points/Gui/Resources/translations/Points_pl.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.qm b/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.qm index 01cb759ffb..be0f5f755a 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.qm and b/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm index ca21a5a351..04243f4b12 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm and b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ro.qm b/src/Mod/Points/Gui/Resources/translations/Points_ro.qm index 0b3d65cdeb..fded885d14 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ro.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ro.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ru.qm b/src/Mod/Points/Gui/Resources/translations/Points_ru.qm index 2a53cafc6d..f5d69a066e 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_ru.qm and b/src/Mod/Points/Gui/Resources/translations/Points_ru.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sk.qm b/src/Mod/Points/Gui/Resources/translations/Points_sk.qm index 9b4371e2bc..ce9371c82d 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_sk.qm and b/src/Mod/Points/Gui/Resources/translations/Points_sk.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sl.qm b/src/Mod/Points/Gui/Resources/translations/Points_sl.qm index 38b29e4abf..a6bc71a6e9 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_sl.qm and b/src/Mod/Points/Gui/Resources/translations/Points_sl.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sr.qm b/src/Mod/Points/Gui/Resources/translations/Points_sr.qm index 30bb4afe60..c1b12c439b 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_sr.qm and b/src/Mod/Points/Gui/Resources/translations/Points_sr.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.qm b/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.qm index 9735958a1e..78705c31ab 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.qm and b/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_tr.qm b/src/Mod/Points/Gui/Resources/translations/Points_tr.qm index 0721b68846..87fccf4aea 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_tr.qm and b/src/Mod/Points/Gui/Resources/translations/Points_tr.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_uk.qm b/src/Mod/Points/Gui/Resources/translations/Points_uk.qm index 9c77ee3821..677657d1f0 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_uk.qm and b/src/Mod/Points/Gui/Resources/translations/Points_uk.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_val-ES.qm b/src/Mod/Points/Gui/Resources/translations/Points_val-ES.qm index a268b62988..0064c9d3e3 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_val-ES.qm and b/src/Mod/Points/Gui/Resources/translations/Points_val-ES.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_vi.qm b/src/Mod/Points/Gui/Resources/translations/Points_vi.qm index 30ab04ae98..2b5d6b12c0 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_vi.qm and b/src/Mod/Points/Gui/Resources/translations/Points_vi.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.qm b/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.qm index ccdb90873e..2c9f74b21b 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.qm and b/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.qm b/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.qm index 975ae62ced..3b8f489601 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.qm and b/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm index 440d3a37b2..51dcb3b18c 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ar.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ar.qm index 6e2fa22525..19407494b5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ar.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ar.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ca.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ca.qm index db10da11c0..4982a1b1b9 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ca.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ca.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm index 4a29a8729f..d7ad0f0cda 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm index 16151b3094..6e484a2ebe 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts index 39ecaa72cc..2edc1ada11 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts @@ -121,7 +121,7 @@ &Reset Camera - Kamera zurücksetzen + Kamera zu&rücksetzen diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_el.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_el.qm index 46f376e06f..91b45ceb55 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_el.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_el.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm index 89f08f4e1d..bad3ef198f 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm index 9ca213c7be..2cbc5ab352 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_eu.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm index 02b4da4734..5722b508eb 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fil.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fil.qm index c9765887cf..750767ca5b 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fil.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fil.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm index d29e2802a9..97ec887846 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm index 72c6edf42a..af14ddcbae 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_gl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm index 4cdde3bf73..0e31bb5c39 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm index dbd89d3da0..31f71c4569 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts index 367f1ba97a..c72e8dcfe6 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts @@ -472,7 +472,7 @@ Folytatni szeretné? The path to the POV-Ray executable, if you want to render from %1 - The path to the POV-Ray executable, if you want to render from %1 + A végrehajtható nézőpont-fénysugár elérési útja %1-ből való renderelés esetén diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_id.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_id.qm index ae47eadb76..ee7fb6c6c6 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_id.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_id.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm index 5983073b82..25b8d6d4a0 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm index 984c05338d..6e09aa03c5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_kab.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_kab.qm index 3c4455a9e2..d2b2e57d51 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_kab.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_kab.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ko.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ko.qm index 154a261d44..879b74235e 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ko.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ko.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_lt.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_lt.qm index 485dc84ec2..26fc31726a 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_lt.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_lt.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm index 27904fa121..d228babbea 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm index 5d1d7cbd01..a6f622cec4 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm index 55a777c02c..6021ac270a 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm index e0cb42fd8b..d040cdd8f2 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm index 7e4a4f63f0..970c77d582 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm index 2e4c0ef2a2..59c2bab715 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm index aefc9f9351..3a4b4cd852 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sk.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sk.qm index 66df0267b1..afd5a3a7b9 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sk.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sk.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm index ad6c68742b..939739a5f5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts index 5c198f74c9..027483ca30 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sl.ts @@ -181,7 +181,7 @@ The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? - Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike POV-Ray morda kasneje izgledal drugače kot pričakovano. + Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike POV-Ray morda kasneje videti drugače, kot pričakovano. Ali želite nadaljevati? @@ -215,7 +215,7 @@ Ali želite nadaljevati? The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? - Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike Luxrender morda kasneje izgledal drugače kot pričakovano. + Kamera trenutnega pogleda ni perspektivna in zato bo rezultat slike Luxrender morda kasneje videti drugače, kot pričakovano. Ali želite nadaljevati? @@ -296,12 +296,12 @@ Ali želite nadaljevati? Please set the path to the POV-Ray executable in the preferences. - Nastavite pot do izvedljive datoteke POV-Ray v možnostih. + Nastavite pot do izvedljive datoteke POV-Ray v prednastavitvah. Please correct the path to the POV-Ray executable in the preferences. - Popravite pot do izvedljive datoteke POV-Ray v možnostih. + Popravite pot do izvedljive datoteke POV-Ray v prednastavitvah. @@ -312,12 +312,12 @@ Ali želite nadaljevati? Please set the path to the luxrender or luxconsole executable in the preferences. - Nastavite pot do izvedljive datoteke Luxrender ali Luxconsole v možnostih. + Nastavite pot do izvedljive datoteke Luxrender ali Luxconsole v prednastavitvah. Please correct the path to the luxrender or luxconsole executable in the preferences. - Popravite pot do izvedljive datoteke Luxrender ali Luxconsole v možnostih. + Popravite pot do izvedljive datoteke Luxrender ali Luxconsole v prednastavitvah. diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm index 5c5447ccc9..ae87c913cf 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm index 399983be7a..026f02517a 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_tr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_tr.qm index 8f670bab80..80cb911192 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_tr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_tr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm index 245884f769..9eb9930ce8 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm index 495330b300..270d9ccf48 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_val-ES.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_vi.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_vi.qm index d953f98232..2424aa99d5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_vi.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_vi.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm index 9af5d43845..e8ad3cb9a5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm index 86701a45ee..9c45161fbd 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_af.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_af.qm index 6aae5e3970..c81cb3ec9c 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_af.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_af.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.qm index 55e890c688..7480fca272 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm index 891b11b1bc..bde5703cec 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.qm index 81e27f66e4..064b4cf5ec 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts index f3d74da883..c0f2fc1887 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts @@ -29,7 +29,7 @@ Plane... - Plane... + Rovina... @@ -47,7 +47,7 @@ Polynomial surface - Polynomial surface + Polynomický povrch @@ -70,7 +70,7 @@ Approximate a sphere - Approximate a sphere + Přibližná koule @@ -155,7 +155,7 @@ From components - From components + Z komponentů @@ -473,7 +473,7 @@ Detect - Detect + Detekovat @@ -503,17 +503,17 @@ Segmentation - Segmentation + Segmentace Cut segment from mesh - Cut segment from mesh + Vyjmout segment z sítě Hide segment - Hide segment + Skrýt segment diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm index ce7aaa9320..0c7b5c6bb2 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.qm index 84eeac13e8..59d2a9a7ab 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.qm index d882875363..6fd55bc70a 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm index 71eb4ed8e0..c1a8d231da 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.qm index d4bca9ab56..c2bb4482c4 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.qm index 9b66a7058a..ec1da49bae 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.qm index b1905f78ce..870d47a969 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.qm index c6230a0847..b83fa75f8d 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.qm index 5b43306a60..ac39bd5ceb 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.qm index a4b421a41b..3eb3832326 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.qm index b033cbe5ad..bffaa7bb9e 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.qm index 8f4a48f73e..afd96cfec7 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.qm index 83e9c35015..abd008417a 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_kab.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_kab.qm index b64991ca99..f5303994df 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_kab.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_kab.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ko.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ko.qm index 8307280be7..c9f7f1ebd9 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ko.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ko.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.qm index 98c85edd13..f3ad8326e9 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.qm index da8a14c765..39cd442d4f 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.qm index c1cb127d7c..cad49542dc 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.ts index 47cfc39222..7ba23a8d3a 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_no.ts @@ -47,12 +47,12 @@ Polynomial surface - Polynomial surface + Polynomial overflate Approximate a polynomial surface - Approximate a polynomial surface + Anslå en polynomisk overflate @@ -88,7 +88,7 @@ Approximate a B-spline surface - Approximate a B-spline surface + Anslå en B-splinoverflate @@ -216,7 +216,7 @@ Degree - Degree + Grader @@ -242,7 +242,7 @@ Size factor - Size factor + Størrelse faktor @@ -252,17 +252,17 @@ Total Weight - Total Weight + Total vekt Length of gradient - Length of gradient + Lengde på gradient Bending energy - Bending energy + Bøyningsenergi diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.qm index c83b49db22..edc14e69df 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.qm index c5a35dc539..46f335e6eb 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts index 23d1a7d053..32aa2798f0 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts @@ -47,7 +47,7 @@ Polynomial surface - Polynomial surface + Superfície de polinômios diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm index b50cca588d..56cfbcfb8d 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.qm index 13852422b2..ac4227ce7a 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm index 96981ea601..1eb85d1560 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sk.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sk.qm index e3c91ecef3..63345a9878 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sk.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sk.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm index 580a6a8cbb..b19a9bd206 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm index 395ab536a0..ac51ba7ea6 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.qm index 9bef70ce33..0f289dc95e 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.qm index b52a4774cc..caf2dcbbfb 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts index d207e97cb7..e3adbcc118 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts @@ -277,7 +277,7 @@ Create placement - Create placement + Yerleşim oluşturun diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.qm index c49a2379fe..1b5b1c0190 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm index 92cea2dcf4..e8a94a84f8 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.qm index 53eccf947d..87c206d402 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.qm index dbb4789ca8..97db56e5b9 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.qm index ea2b5b866c..bef20ba3cb 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm index 45f5a7b592..9074a437ad 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ar.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ar.qm index b25f4644c5..2576df11de 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ar.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ar.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm index 44716cb2db..4112710915 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm index dc77feb54b..8de530f450 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm index bef87811bb..fe307b0f1b 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_el.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_el.qm index 4b75ca4f4a..0e400fd466 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_el.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_el.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm index 01c18bcbe9..332177904a 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.qm index 4c56fd9fe4..dacc396aad 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm index 2a343fac9b..e46bec56aa 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fil.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_fil.qm index 879a643432..5f0e652ac6 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_fil.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_fil.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm index 59eb83c538..cc30d693f2 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.qm index 2a2d2d5f85..1fa2928707 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm index a784601ba2..4ef53ddd2c 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm index 0198c846c8..fcadce6da2 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_id.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_id.qm index a22722a3cc..0e5f0d73b7 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_id.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_id.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm index 77ada9f7c1..d672580d4f 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm index 9426815a39..c321c5ddbc 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_kab.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_kab.qm index 27d3b1aeb4..3fd2363c1f 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_kab.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_kab.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ko.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ko.qm index 979190aee8..ad2442062a 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ko.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ko.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_lt.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_lt.qm index d6daf9dc55..5dcc402c58 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_lt.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_lt.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm index d412a7b589..b9b191481e 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm index 392deec4a6..c7d7b142f1 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm index 2cba154354..031995c36d 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm index 8c9ea2788a..7715f2271f 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm index 6268792ff0..5e8ab7680a 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm index 6f3e948b42..5d8fb139db 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm index df183de005..6edaed28a6 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sk.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sk.qm index 9380fafbbc..f2410c3f18 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_sk.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_sk.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.qm index 8332dc7681..968b2b7d17 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm index 16dd5f19a9..d4b15271fa 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm index b1a6d649f7..7f1eed6176 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm index f3a6d54aef..461f9f68db 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm index 63a9e282da..4bf7136b00 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.qm index 163181f9be..e744880f98 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_vi.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_vi.qm index bb226de57c..5171d33bf5 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_vi.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_vi.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm index 315cd32264..149b6cf580 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm index 6054a00c4c..38162ae9c9 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_af.qm b/src/Mod/Ship/resources/translations/Ship_af.qm index 1d50bdc72a..b8afc23bcb 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_af.qm and b/src/Mod/Ship/resources/translations/Ship_af.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ar.qm b/src/Mod/Ship/resources/translations/Ship_ar.qm index c23d86fad2..da660ec081 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ar.qm and b/src/Mod/Ship/resources/translations/Ship_ar.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ca.qm b/src/Mod/Ship/resources/translations/Ship_ca.qm index 8d7bbea58b..d46dd728bb 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ca.qm and b/src/Mod/Ship/resources/translations/Ship_ca.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_cs.qm b/src/Mod/Ship/resources/translations/Ship_cs.qm index b8fae67af2..4cd6ece9f4 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_cs.qm and b/src/Mod/Ship/resources/translations/Ship_cs.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_de.qm b/src/Mod/Ship/resources/translations/Ship_de.qm index d4dc2dd1e4..24ae93d6de 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_de.qm and b/src/Mod/Ship/resources/translations/Ship_de.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_el.qm b/src/Mod/Ship/resources/translations/Ship_el.qm index 28529c8d34..bd12952129 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_el.qm and b/src/Mod/Ship/resources/translations/Ship_el.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_es-ES.qm b/src/Mod/Ship/resources/translations/Ship_es-ES.qm index f9bb7b616b..2b63ebf97f 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_es-ES.qm and b/src/Mod/Ship/resources/translations/Ship_es-ES.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_eu.qm b/src/Mod/Ship/resources/translations/Ship_eu.qm index 58b1460bc4..1d057dbd72 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_eu.qm and b/src/Mod/Ship/resources/translations/Ship_eu.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_fi.qm b/src/Mod/Ship/resources/translations/Ship_fi.qm index dcc3ca69d2..eb799e13e6 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_fi.qm and b/src/Mod/Ship/resources/translations/Ship_fi.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_fil.qm b/src/Mod/Ship/resources/translations/Ship_fil.qm index af9e963d12..f1425edfc5 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_fil.qm and b/src/Mod/Ship/resources/translations/Ship_fil.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_fr.qm b/src/Mod/Ship/resources/translations/Ship_fr.qm index b4a4ea64fe..3830d6ec6b 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_fr.qm and b/src/Mod/Ship/resources/translations/Ship_fr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_gl.qm b/src/Mod/Ship/resources/translations/Ship_gl.qm index 68ff5223fa..42c75c2e0d 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_gl.qm and b/src/Mod/Ship/resources/translations/Ship_gl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_hr.qm b/src/Mod/Ship/resources/translations/Ship_hr.qm index 5a8e1fd5ab..4f061e87c5 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_hr.qm and b/src/Mod/Ship/resources/translations/Ship_hr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_hu.qm b/src/Mod/Ship/resources/translations/Ship_hu.qm index b39f20630e..41dca94fc4 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_hu.qm and b/src/Mod/Ship/resources/translations/Ship_hu.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_id.qm b/src/Mod/Ship/resources/translations/Ship_id.qm index 8ad9a2c900..f8883cd565 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_id.qm and b/src/Mod/Ship/resources/translations/Ship_id.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_it.qm b/src/Mod/Ship/resources/translations/Ship_it.qm index f07d76ed87..0f53f88416 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_it.qm and b/src/Mod/Ship/resources/translations/Ship_it.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ja.qm b/src/Mod/Ship/resources/translations/Ship_ja.qm index d47516238c..c1ee53ab24 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ja.qm and b/src/Mod/Ship/resources/translations/Ship_ja.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_kab.qm b/src/Mod/Ship/resources/translations/Ship_kab.qm index 90bd7ee866..b0d15b1a38 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_kab.qm and b/src/Mod/Ship/resources/translations/Ship_kab.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ko.qm b/src/Mod/Ship/resources/translations/Ship_ko.qm index a32dc30c46..7ac6dce22c 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ko.qm and b/src/Mod/Ship/resources/translations/Ship_ko.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_lt.qm b/src/Mod/Ship/resources/translations/Ship_lt.qm index 0972c7eb06..3bee167507 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_lt.qm and b/src/Mod/Ship/resources/translations/Ship_lt.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_nl.qm b/src/Mod/Ship/resources/translations/Ship_nl.qm index 255061ae39..837167f8c8 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_nl.qm and b/src/Mod/Ship/resources/translations/Ship_nl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_no.qm b/src/Mod/Ship/resources/translations/Ship_no.qm index 66880f0b2e..03fd4e90c8 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_no.qm and b/src/Mod/Ship/resources/translations/Ship_no.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_no.ts b/src/Mod/Ship/resources/translations/Ship_no.ts index c6164b3085..9cd217c34e 100644 --- a/src/Mod/Ship/resources/translations/Ship_no.ts +++ b/src/Mod/Ship/resources/translations/Ship_no.ts @@ -494,7 +494,7 @@ Trim - Trim + Beskjær diff --git a/src/Mod/Ship/resources/translations/Ship_pl.qm b/src/Mod/Ship/resources/translations/Ship_pl.qm index 5e765df5af..b7726c68e2 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pl.qm and b/src/Mod/Ship/resources/translations/Ship_pl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_pt-BR.qm b/src/Mod/Ship/resources/translations/Ship_pt-BR.qm index 14978edcdd..4e21ee7dc2 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pt-BR.qm and b/src/Mod/Ship/resources/translations/Ship_pt-BR.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_pt-PT.qm b/src/Mod/Ship/resources/translations/Ship_pt-PT.qm index 8353e91a7f..2435ba4016 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pt-PT.qm and b/src/Mod/Ship/resources/translations/Ship_pt-PT.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ro.qm b/src/Mod/Ship/resources/translations/Ship_ro.qm index c97560fd1a..93bca2e024 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ro.qm and b/src/Mod/Ship/resources/translations/Ship_ro.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ru.qm b/src/Mod/Ship/resources/translations/Ship_ru.qm index c111d87286..4b6ff0923e 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ru.qm and b/src/Mod/Ship/resources/translations/Ship_ru.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sk.qm b/src/Mod/Ship/resources/translations/Ship_sk.qm index fe49a402dc..eef15c56b6 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_sk.qm and b/src/Mod/Ship/resources/translations/Ship_sk.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sl.qm b/src/Mod/Ship/resources/translations/Ship_sl.qm index f0bd1cbb1d..792d8a2dc0 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_sl.qm and b/src/Mod/Ship/resources/translations/Ship_sl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sl.ts b/src/Mod/Ship/resources/translations/Ship_sl.ts index 8e48e41c30..d3e733ea0a 100644 --- a/src/Mod/Ship/resources/translations/Ship_sl.ts +++ b/src/Mod/Ship/resources/translations/Ship_sl.ts @@ -290,7 +290,7 @@ A loading condition instance must be selected before using this tool (no objects selected) - Preden uporabite to orodje, izberite primerek obremenitve (noben objekt ni bil izbran) + Preden uporabite to orodje, izberite pogoj obteževanja (noben predmet ni bil izbran) @@ -305,12 +305,12 @@ More than one loading condition have been selected (the extra loading conditions will be ignored) - Izbrana je bila več kot ena obremenitev (dodatne obremenitve bodo prezrte) + Izbran je bil več kot en pogoj obtežitve (dodatni obtežbeni pogoji bodo prezrti) A loading condition instance must be selected before using this tool (no valid loading condition found at the selected objects) - Preden uporabite to orodje, izberite primerek obremenitve (med izbranimi objekti ni veljavne obremenitve) + Preden uporabite to orodje, izberite pogoj obteževanja (med izbranimi predmeti ni veljavne obtežbe) @@ -550,12 +550,12 @@ Create a new loading condition - Ustvari novo obremenitev + Ustvari novo obtežitev Create a new load condition spreadsheet - Ustvari novo preglednico obremenitve + Ustvari novo preglednico obtežb diff --git a/src/Mod/Ship/resources/translations/Ship_sr.qm b/src/Mod/Ship/resources/translations/Ship_sr.qm index 71e8d00044..08896f5aa2 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_sr.qm and b/src/Mod/Ship/resources/translations/Ship_sr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sv-SE.qm b/src/Mod/Ship/resources/translations/Ship_sv-SE.qm index a73d363f23..e010fe120d 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_sv-SE.qm and b/src/Mod/Ship/resources/translations/Ship_sv-SE.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_tr.qm b/src/Mod/Ship/resources/translations/Ship_tr.qm index adccf57a8d..4ec4213c67 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_tr.qm and b/src/Mod/Ship/resources/translations/Ship_tr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_tr.ts b/src/Mod/Ship/resources/translations/Ship_tr.ts index 6265edb1a9..4b8e49e875 100644 --- a/src/Mod/Ship/resources/translations/Ship_tr.ts +++ b/src/Mod/Ship/resources/translations/Ship_tr.ts @@ -159,7 +159,7 @@ Areas curve tool number of points - Alanlar eğri aracı puan sayısı + Alan eğrisi aracı nokta sayısı diff --git a/src/Mod/Ship/resources/translations/Ship_uk.qm b/src/Mod/Ship/resources/translations/Ship_uk.qm index edab14481f..5eca19db93 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_uk.qm and b/src/Mod/Ship/resources/translations/Ship_uk.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_val-ES.qm b/src/Mod/Ship/resources/translations/Ship_val-ES.qm index 618a072923..0555c432d8 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_val-ES.qm and b/src/Mod/Ship/resources/translations/Ship_val-ES.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_vi.qm b/src/Mod/Ship/resources/translations/Ship_vi.qm index 89f91d3526..86ec10cbe2 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_vi.qm and b/src/Mod/Ship/resources/translations/Ship_vi.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_zh-CN.qm b/src/Mod/Ship/resources/translations/Ship_zh-CN.qm index 0020160d2a..186f984158 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_zh-CN.qm and b/src/Mod/Ship/resources/translations/Ship_zh-CN.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_zh-TW.qm b/src/Mod/Ship/resources/translations/Ship_zh-TW.qm index 2f54e9d6b1..070a2fee43 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_zh-TW.qm and b/src/Mod/Ship/resources/translations/Ship_zh-TW.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm index b6d8dff50b..cef816d7f1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts index de6af593b8..b8a87e8ead 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketser - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketser - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Dwingradius - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketser - + Create arc Skep boog - + Create an arc in the sketcher Create an arc in the sketcher - + Center and end points Center and end points - + End points and rim point End points and rim point @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketser - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketser - + Create circle Skep sirkel - + Create a circle in the sketcher Create a circle in the sketcher - + Center and rim point Center and rim point - + 3 rim points 3 rim points @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketser - + Create a conic Create a conic - + Create a conic in the sketch Create a conic in the sketch - + Ellipse by center, major radius, point Ellipse by center, major radius, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse by Periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketser - + Create regular polygon Create regular polygon - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Triangle - + Square Square - + Pentagon Pentagon - + Hexagon Hexagon - + Heptagon Heptagon - + Octagon Octagon - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketser - + Constrain angle Dwinghoek - + Fix the angle of a line or the angle between two lines Vries die hoek van 'n lyn of die hoek tussen twee lyne @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketser - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketser - + Constrain coincident Beperk samevalling - + Create a coincident constraint on the selected item Skep 'n samevallende beperking op die gekose item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketser - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketser - + Constrain distance Beperk afstand - + Fix a length of a line or the distance between a line and a vertex Herstel 'n lynlengte of afstand tussen 'n lyn en 'n hoekpunt @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketser - + Constrain horizontal distance Beperk horisontale afstand - + Fix the horizontal distance between two points or line ends Hou die horisontale afstand tussen twee punte of lyneindpunte konstant @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketser - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Hou die vertikale afstand tussen twee punte of lyneindpunte konstant @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketser - + Constrain equal Dwing ewe veel - + Create an equality constraint between two lines or between circles and arcs Skep 'n gelykheidsbeperking tussen twee lyne of tussen sirkels en boë @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketser - + Constrain horizontally Beperk horisontaal - + Create a horizontal constraint on the selected item Skep 'n horisontale beperking op die gekose item @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketser - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketser - + Constrain lock Beperk sluiting - + Create a lock constraint on the selected item Skep 'n slotbeperking op die geselekteerde item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketser - + Constrain parallel Beperk parallel - + Create a parallel constraint between two lines Skep 'n parallelle beperking tussen twee lyne @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketser - + Constrain perpendicular Dwing loodreg - + Create a perpendicular constraint between two lines Create a perpendicular constraint between two lines @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketser - + Constrain point onto object Beperk die punt tot die voorwerp - + Fix a point onto an object Heg 'n punt aan 'n voorwerp @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketser - + Constrain radius Dwingradius - + Fix the radius of a circle or an arc Sluit vas die radius van 'n sirkel of 'n boog @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketser - + Constrain refraction (Snell's law') Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketser - + Constrain symmetrical Dwing simmetries - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points with respect to a line or a third point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketser - + Constrain tangent Dwingraaklyn - + Create a tangent constraint between two entities Skep 'n tangensiale beperking tussen die twee entiteite @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketser - + Constrain vertically Beperk vertikaal - + Create a vertical constraint on the selected item Skep 'n vertikale beperking op die gekose item @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketser - + Create arc by three points Create arc by three points - + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketser - + Create circle by three points Create circle by three points - + Create a circle by 3 perimeter points Create a circle by 3 perimeter points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketser - + Create arc by center Create arc by center - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketser - + Create an arc of ellipse Create an arc of ellipse - + Create an arc of ellipse in the sketch Create an arc of ellipse in the sketch @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketser - + Create an arc of hyperbola Create an arc of hyperbola - + Create an arc of hyperbola in the sketch Create an arc of hyperbola in the sketch @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketser - + Create an arc of parabola Create an arc of parabola - + Create an arc of parabola in the sketch Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketser - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketser - + Create circle Skep sirkel - + Create a circle in the sketch Skep 'n sirkel in die skets @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketser - + Create draft line Skep ontwerplyn - + Create a draft line in the sketch Skep 'n ontwerplyn in die skets @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketser - + Create ellipse by 3 points Create ellipse by 3 points - + Create an ellipse by 3 points in the sketch Create an ellipse by 3 points in the sketch @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketser - + Create ellipse by center Create ellipse by center - + Create an ellipse by center in the sketch Create an ellipse by center in the sketch @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketser - + Create fillet Skep ronding - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketser - + Create heptagon Create heptagon - + Create a heptagon in the sketch Create a heptagon in the sketch @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketser - + Create hexagon Create hexagon - + Create a hexagon in the sketch Create a hexagon in the sketch @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketser - + Create line Skep lyn - + Create a line in the sketch Trek 'n lyn in die skets @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketser - + Create octagon Create octagon - + Create an octagon in the sketch Create an octagon in the sketch @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketser - + Create pentagon Create pentagon - + Create a pentagon in the sketch Create a pentagon in the sketch @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketser - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketser - + Create point Skep punt - + Create a point in the sketch Skep 'n punt in die skets @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketser - + Create polyline Skep veelvuldige segment lyn - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketser - + Create rectangle Skep reghoek - + Create a rectangle in the sketch Skep 'n reghoek in die skets @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketser - + Create regular polygon Create regular polygon - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketser - + Create slot Create slot - + Create a slot in the sketch Create a slot in the sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketser - + Create square Create square - + Create a square in the sketch Create a square in the sketch @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketser - + Create text Skep teks - + Create text in the sketch Skep teks in die skets @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketser - + Create equilateral triangle Create equilateral triangle - + Create an equilateral triangle in the sketch Create an equilateral triangle in the sketch @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketser - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketser - + External geometry External geometry - + Create an edge linked to an external geometry Create an edge linked to an external geometry @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketser - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketser - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketser - + Trim edge Knip kant - + Trim an edge with respect to the picked position Trim an edge with respect to the picked position @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Kies die kant(e) van die skets. - - - - + + + + Dimensional constraint Dimensionele beperking @@ -2232,273 +2232,273 @@ Een van die keuses moet op die skets wees - - + + Select an edge from the sketch. Kies 'n rand in die skets. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Onmoontlike beperking - - - - + + + + The selected edge is not a line segment Die gekose rand is nie 'n lynsegment nie - - - - - - + + + + + + Double constraint Dubbele beperking - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! The selected item(s) can't accept a horizontal constraint! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! The selected item(s) can't accept a vertical constraint! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Fout - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Kies hoekpunte in die skets. - - + + Select exactly one line or one point and one line or two points from the sketch. Kies presies een lyn of een punt en een lyn of twee punte uit die skets. - + Cannot add a length constraint on an axis! Cannot add a length constraint on an axis! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Kies presies een lyn of tot twee punte uit die skets. - + Cannot add a horizontal length constraint on an axis! Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Kies twee of meer lyne van die skets. - - + + Select at least two lines from the sketch. Kies ten minste twee lyne van die skets. - + Select a valid line Kies 'n geldige lyn - - + + The selected edge is not a valid line Die gekose kant is nie 'n geldige lyn nie - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. perpendicular constraint Select some geometry from the sketch. - + Wrong number of selected objects! perpendicular constraint Wrong number of selected objects! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint With 3 objects, there must be 2 curves and 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. One of the selected edges should be a line. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Select some geometry from the sketch. - + Wrong number of selected objects! tangent constraint Wrong number of selected objects! - - - + + + Cannot add a tangency constraint at an unconnected point! Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Select one or more arcs or circles from the sketch. - - + + Constrain equal Dwing ewe veel - + Do you want to share the same radius for all selected elements? Do you want to share the same radius for all selected elements? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines Parallel lines - - + + An angle constraint cannot be set for two parallel lines. An angle constraint cannot be set for two parallel lines. - + Cannot add an angle constraint on an axis! Cannot add an angle constraint on an axis! - + Select two edges from the sketch. Kies twee kante van die skets. - - + + Select two or more compatible edges Select two or more compatible edges - + Sketch axes cannot be used in equality constraints Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Select two or more edges of similar type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). Number of selected objects is not 3 (is %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Incompatible geometry is selected! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint Sketch axes cannot be used in internal alignment constraint - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Maximum 2 points are supported. - - + + Maximum 2 lines are supported. Maximum 2 lines are supported. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select constraint(s) from the sketch. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - - + + Radius: Radius: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Lengte: - - + + Change radius Change radius - - + + Change diameter Change diameter - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Unnamed @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher validation - + Invalid constraints Invalid constraints - - + + + Fix Fix - - + + + Find Find - + Delete constraints to external geom. Delete constraints to external geom. - + Missing coincidences Missing coincidences - + Tolerance: Tolerance: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Enable/Update - + Disable Disable @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Wysig skets - + A dialog is already open in the task panel 'n Dialoog is reeds oop in die taakpaneel - + Do you want to close this dialog? Wil jy hierdie dialoog toe maak? - + Invalid sketch Invalid sketch - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Please remove the following constraint: - + Please remove at least one of the following constraints: Please remove at least one of the following constraints: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + Empty sketch Empty sketch - + Over-constrained sketch Over-constrained sketch - - - + + + (click to select) (click to select) - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Sluit vas die radius van 'n sirkel of 'n boog @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Create an arc of ellipse by its center, major radius, endpoints @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Create a circle by its center and by a rim point @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Create a heptagon by its center and by one corner @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Create a hexagon by its center and by one corner @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Create a pentagon by its center and by one corner @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Create a square by its center and by one corner @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Create an equilateral triangle by its center and by one corner @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm index 4c7061d437..184a6a7183 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts index 5fbcddd207..5cdcd309fa 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch يقوم بنسخ الشكل الهندسي لرسمة أخرى @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius تقييد الشعاع - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher إنشاء قوس في الرسمة - + Center and end points المركز ونقاط النهاية - + End points and rim point End points and rim point @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline إنشاء منحنى B - + Create a B-spline in the sketch إنشاء منحنى B في الرسمة @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle إنشاء دائرة - + Create a circle in the sketcher إنشاء دائرة في الرسمة - + Center and rim point Center and rim point - + 3 rim points 3 rim points @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic إنشاء مخروطي - + Create a conic in the sketch إنشاء مخروطي في الرسمة - + Ellipse by center, major radius, point Ellipse by center, major radius, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse by Periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon إنشاء مضلع منتظم - + Create a regular polygon in the sketcher إنشاء مضلع منتظم في الرسمة - + Triangle مثلث - + Square مربع - + Pentagon خماسي الأضلاع - + Hexagon سداسي الأضلاع - + Heptagon سباعي - + Octagon ثماني الأضلاع - + Regular Polygon مضلع منتظم @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle تقييد الزاوية - + Fix the angle of a line or the angle between two lines ضبط زاوية خط ما أو الزاوية بين خطين @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Constrain coincident - + Create a coincident constraint on the selected item Create a coincident constraint on the selected item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance تقييد المسافة - + Fix a length of a line or the distance between a line and a vertex ضبط طول خط ما أو المسافة الفاصلة بين الخط وقمة الرأس @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends ضبط المسافة الأفقية بين نقطتين أو نهايات الخط @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends ضبط المسافة العمودية بين نقطتين أو نهايات الخط @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Constrain equal - + Create an equality constraint between two lines or between circles and arcs Create an equality constraint between two lines or between circles and arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally تقييد أفقي - + Create a horizontal constraint on the selected item إنشاء تقييد أفقي على العنصر المختار @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Constrain lock - + Create a lock constraint on the selected item Create a lock constraint on the selected item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Constrain parallel - + Create a parallel constraint between two lines Create a parallel constraint between two lines @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Constrain perpendicular - + Create a perpendicular constraint between two lines إنشاء تقييد عمودي بين خطين @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Constrain point onto object - + Fix a point onto an object Fix a point onto an object @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius تقييد الشعاع - + Fix the radius of a circle or an arc ضبط شعاع دائرة أو قوس @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points with respect to a line or a third point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent تقييد المماس - + Create a tangent constraint between two entities إنشاء تقييد للمماس بين كِيَانَيْن @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Constrain vertically - + Create a vertical constraint on the selected item Create a vertical constraint on the selected item @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points إنشاء قوس إنطلاقا من ثلاث نقاط - + Create an arc by its end points and a point along the arc إنشاء قوس بنقط النهاية الخاصة به ونقطة على طول القوس @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points إنشاء دائرة إنطلاقا من ثلاث نقاط - + Create a circle by 3 perimeter points Create a circle by 3 perimeter points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Create arc by center - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse إنشاء قوس إهليج - + Create an arc of ellipse in the sketch إنشاء قوس إهليج في الرسمة @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola إنشاء قوس هُذْلول - + Create an arc of hyperbola in the sketch إنشاء قوس هُذْلول في الرسمة @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola إنشاء قوس شَلْجَم - + Create an arc of parabola in the sketch إنشاء قوس شَلْجَم في الرسمة @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline إنشاء منحنى B - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle إنشاء دائرة - + Create a circle in the sketch إنشاء دائرة في الرسمة @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line إنشاء خط مسودّة - + Create a draft line in the sketch إنشاء خط مسودّة في الرسمة @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points إنشاء إهليج إنطلاقا من ثلاث نقاط - + Create an ellipse by 3 points in the sketch إنشاء إهليج إنطلاقا من ثلات نقاط على الرسمة @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center إنشاء إهليج إنطلاقا من المركز - + Create an ellipse by center in the sketch Create an ellipse by center in the sketch @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Create fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon إنشاء سباعي الأضلاع - + Create a heptagon in the sketch إنشاء سُبَاعِيّ الأَضْلاَع في الرسمة @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon إنشاء سداسي الأضلاع - + Create a hexagon in the sketch إنشاء سداسي الأضلاع في الرسمة @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line إنشاء خط - + Create a line in the sketch إنشاء خط في الرسمة @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon إنشاء ثماني الأضلاع - + Create an octagon in the sketch إنشاء ثماني الأضلاع في الرسمة @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon إنشاء خماسي الأضلاع - + Create a pentagon in the sketch إنشاء خماسي الأضلاع في الرسمة @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline إنشاء منحنى B دوري - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point إنشاء نقطة - + Create a point in the sketch إنشاء نقطة في الرسمة @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline إنشاء شكل متعدد الخطوط - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle إنشاء مستطيل - + Create a rectangle in the sketch إنشاء مستطيل في الرسمة @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon إنشاء مضلع منتظم - + Create a regular polygon in the sketch إنشاء مضلع منتظم في الرسمة @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot إنشاء فَتْحَة - + Create a slot in the sketch إنشاء فَتْحَة في الرسمة @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square إنشاء مربع - + Create a square in the sketch إنشاء مربع على الرسمة @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text إنشاء نص - + Create text in the sketch إنشاء نص في الرسمة @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle إنشاء مثلث متساوي الأضلاع - + Create an equilateral triangle in the sketch إنشاء مثلث متساوي الاضلاع في الرسمة @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry الشكل الهندسي الخارجي - + Create an edge linked to an external geometry Create an edge linked to an external geometry @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge تقليم الحافة - + Trim an edge with respect to the picked position Trim an edge with respect to the picked position @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. إن الإصدار الحالي لـ OCE/OCC لا يدعم عملية العقدة. يجب أن تتوفر على الإصدار 6.9.0 أو أعلى. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. لم تقم بطلب أي تغيير في تعددية العقدة. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. لا يمكن خفض التعددية إلى ما تحت الصفر. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ إختيار حافة(حواف) من الرسمة. - - - - + + + + Dimensional constraint Dimensional constraint @@ -2232,273 +2232,273 @@ يجب على واحد من العناصر المختارة أن يكون على الرسمة - - + + Select an edge from the sketch. إختيار حافة من الرسمة. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Impossible constraint - - - - + + + + The selected edge is not a line segment إن الحافة التي تم إختيارها ليست عبارة عن شريحة خط - - - - - - + + + + + + Double constraint Double constraint - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! العنصر(العناصر) الذي قمت باختياره لا يقبل تقييداً أفقياً! - + There are more than one fixed point selected. Select a maximum of one fixed point! لقد تم إختيار أكثر من نقطة تابثة واحدة. قم بإختيار نقطة تابثة واحدة كحد أقصى! - + The selected item(s) can't accept a vertical constraint! العنصر(العناصر) الذي قمت باختياره لا يقبل تقييدا عموديا! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. قم بإختيار قمم الرؤوس من الرسمة. - + Select one vertex from the sketch other than the origin. قم بإختيار قمة رأس واحد من الرسمة غير الأصل. - + Select only vertices from the sketch. The last selected vertex may be the origin. قم بإختيار قمم الرؤوس فقط من الرسمة. إن أخر قمة رأس تم إختيارها قد تكون هي الأصل. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. إختيار حافة واحدة من الرسمة. - + Select only edges from the sketch. إختيار الحواف فقط من الرسمة. - - - - - - - + + + + + + + Error خطأ - + Select two or more points from the sketch. قم باختيار نقطتين أو أكثر من الرسمة. - - + + Select two or more vertexes from the sketch. قم بإختيار إثنان أو أكثر من قمم الرؤوس من الرسمة. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. إختيار قمم الرأس من الرسمة. - - + + Select exactly one line or one point and one line or two points from the sketch. قم بإختيار خط واحد أو نقطة واحدة وخط واحد أو نقطتين بالضبط من الرسمة. - + Cannot add a length constraint on an axis! لا يمكن إضافة تقييد للطول على محور! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. قم باختيار العناصر الصحيحة من الرسمة. - - + + Point on B-spline edge currently unsupported. إن خاصية نقطة على حافة منحنى الـ B غير مدعومة حاليا. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. لا تتوفر أي واحدة من النقاط التي تم إختيارها على تقييد بالمنحنيات التي تنتمي إليها، وهذا راجع لأنهم جزء من نفس العنصر، أو لأن كلاهما عبارة عن أشكال هندسية خارجية. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. قم بإختيار نقطة واحدة وعدة منحنيات، أو منحنى واحد وعدة نقط. لقد قمت باختيار %1 منحنى و %2 نقطة. - - - - + + + + Select exactly one line or up to two points from the sketch. قم بإختيار خط واحد أو نقطتين على الأكثر بالضبط من الرسمة. - + Cannot add a horizontal length constraint on an axis! لا يمكن إضافة تقييد أفقي للطول على محور! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points هذا التقيد يصبح منطقيا فقط لما يتم تطبيقه على شريحة خط أو زوج من النقاط - + Cannot add a vertical length constraint on an axis! لا يمكن إضافة تقييد عمودي للطول على محور! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. قم بإختيار خطين أو أكثر من الرسمة. - - + + Select at least two lines from the sketch. قم بإختيار خطين على الأقل من الرسمة. - + Select a valid line قم باختيار خط صالح - - + + The selected edge is not a valid line الحافة التي قمت باختيارها ليست عبارة عن خط صالح - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c التركيبات المقبولة: منحنيان؛ نقطة نهاية ومنحنى؛ نقطتي نهاية؛ منحنيان ونقطة. - + Select some geometry from the sketch. perpendicular constraint قم بإختيار بعض الأشكال الهندسية من الرسمة. - + Wrong number of selected objects! perpendicular constraint عدد العناصر المختارة غير صحيح! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint With 3 objects, there must be 2 curves and 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. واحد من الحواف المختارة يجب أن يكون عبارة عن خط. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c التركيبات المقبولة: منحنيان؛ نقطة نهاية ومنحنى؛ نقطتي نهاية؛ منحنيان ونقطة. - + Select some geometry from the sketch. tangent constraint قم بإختيار بعض الأشكال الهندسية من الرسمة. - + Wrong number of selected objects! tangent constraint عدد العناصر المختارة غير صحيح! - - - + + + Cannot add a tangency constraint at an unconnected point! Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. إختيار قوس أو أكثر أو دوائر من الرسمة. - - + + Constrain equal Constrain equal - + Do you want to share the same radius for all selected elements? هل تريد منح نفس الشعاع لجميع العناصر التي تم إختيارها؟ - - + + Constraint only applies to arcs or circles. يمكن تطبيق التقييد على الأقواس والدوائر فقط. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. قم باختيار خط أو خطين من الرسمة. أو قم باختيار حافتين ونقطة. - - + + Parallel lines خطوط متوازية - - + + An angle constraint cannot be set for two parallel lines. إن تقييد الزاوية لا يمكن تعيينه على خطين متوازيين. - + Cannot add an angle constraint on an axis! لا يمكن إضافة تقييد للزاوية على محور! - + Select two edges from the sketch. إختيار حافتين من الرسمة. - - + + Select two or more compatible edges قم بإختيار إثنان أو أكثر من الحواف المتوافقة - + Sketch axes cannot be used in equality constraints Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type قم باختيار حافتين أو أكثر من نفس النوع - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. قم بإختيار نقطتين وخط تماثل، أو نقطتين ونقطة تماثل أو خط ونقطة تماثل من الرسمة. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! لا يمكن إضافة تقييد للتماثل بين خط ونقط نهايته! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. العناصر المختارة ليست أشكال هندسية من رسمة واحدة فقط. - + Number of selected objects is not 3 (is %1). عدد العناصر المختارة ليس 3 (إنه %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! لقد تم إختيار شكل هندسي غير متوافق! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. قم بإختيار إهليج واحد وحافة واحدة على الأقل من الرسمة. - + Sketch axes cannot be used in internal alignment constraint لا يمكن إستعمال محاور الرسمة في تقييد المحاذاة الداخلي - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. يتم دعم نقطتين كحد أقصى. - - + + Maximum 2 lines are supported. يتم دعم خطين كحد أقصى. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. حاليا، الأشكال الهندسية الداخلية مدعومة فقط بالنسبة للإهليج أو قوس الإهليج. إن آخر عنصر (element) الذي تم إختياره، يجب أن يكون عبارة عن إهليج أو قوس إهليج. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c إختيار تقييد(تَقْيِيدَاتٌ) من الرسمة. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. يتواجد هذا العنصر في مستند أخر. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. هذا العنصر ينتمي إلى قطعة أخرى. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. إن محاور XY للرسمة المختارة لا تتوفر على نفس الإتجاه كهذه الرسمة. إضغط على Ctrl+Alt لتجاهل هذا الأمر. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. إن أصل الرسمة المختارة ليس محاذيا لأصل هذه الرسمة. إضغط على Ctrl+Alt لتجاهل هذا الأمر. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c إدراج شعاع - - + + Radius: الشعاع: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: قطر الدائرة: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - - + + Change radius Change radius - - + + Change diameter Change diameter - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. يتواجد هذا العنصر في مستند أخر. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed غير مسمى @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. لقد تم حذف جميع التقييدات المتعلقة بالأشكال الهندسية الخارجية. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher validation - + Invalid constraints Invalid constraints - - + + + Fix Fix - - + + + Find Find - + Delete constraints to external geom. حذف التقييدات المرتبطة بالأشكال الهندسية الخارجية. - + Missing coincidences Missing coincidences - + Tolerance: تفاوت: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Enable/Update - + Disable Disable @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Invalid sketch - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. هذه الرسمة غير صالحة ولا يمكن التعديل عليها. - + Please remove the following constraint: المرجو حذف التقييد التالي: - + Please remove at least one of the following constraints: المرجو حذف واحد من التقييدات التالية على الأقل: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + Empty sketch Empty sketch - + Over-constrained sketch Over-constrained sketch - - - + + + (click to select) (إضغط من أجل الإختيار) - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc ضبط شعاع دائرة أو قوس @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc إنشاء قوس بنقط النهاية الخاصة به ونقطة على طول القوس @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Create an arc of ellipse by its center, major radius, endpoints @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Create a circle by its center and by a rim point @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Create a heptagon by its center and by one corner @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Create a hexagon by its center and by one corner @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Create a pentagon by its center and by one corner @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Create a square by its center and by one corner @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Create an equilateral triangle by its center and by one corner @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm index b03c259b48..53a4774040 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index 51c2baf6af..8772008493 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CòpiaCarbó - + Copies the geometry of another sketch Copia la geometria d'un altre sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Restringeix l'arc o el cercle - + Constrain an arc or a circle Restringeix un arc o un cercle - + Constrain radius Restricció del radi - + Constrain diameter Restringeix el diàmetre @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Crear un arc en el dibuix - + Center and end points Centre i punts finals - + End points and rim point Punts finals i punt de vora @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Crea un B-spline - + Create a B-spline in the sketch Crea un B-spline en l'esbós @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Crea un cercle - + Create a circle in the sketcher Crear un cercle en el dibuix - + Center and rim point Punt centre i vora - + 3 rim points 3 punts de vora @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Crear una Cònica - + Create a conic in the sketch Crear una Cònica al croquis - + Ellipse by center, major radius, point El·lipse donats el centre, el radi major i un punt - + Ellipse by Periapsis, apoapsis, minor radius El·lipse donats el periàpside, l'àpside i el radi menor - + Arc of ellipse by center, major radius, endpoints Arc d'el·lipse donats el centre, el radi major i els extrems - + Arc of hyperbola by center, major radius, endpoints Arc d'hipèrbola donats el centre, el radi major i els extrems - + Arc of parabola by focus, vertex, endpoints Arc de paràbola pel focus, el vèrtex i els extrems @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Crear polígon regular - + Create a regular polygon in the sketcher Crea un polígon regular en l'entorn de l'esbós - + Triangle Triangle - + Square Quadrat - + Pentagon Pentàgon - + Hexagon Hexàgon - + Heptagon Heptàgon - + Octagon Octàgon - + Regular Polygon Polígon regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Restricció de angle - + Fix the angle of a line or the angle between two lines Fixa l'angle d'una línia o l'angle entre dues línies @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Restringeix el bloc - + Create a Block constraint on the selected item Crea un bloc restringit en l'element seleccionat @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Restricció coincident - + Create a coincident constraint on the selected item Crea una restricció coincident en l'element seleccionat @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Restringeix el diàmetre - + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Restricció de distància - + Fix a length of a line or the distance between a line and a vertex Fixa una longitud d'una línia o la distància entre una línia i un vèrtex @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixa la distància horitzontal entre dos punts o extrems de línia @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixa la distància vertical entre dos punts o extrems de línia @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Restricció igual - + Create an equality constraint between two lines or between circles and arcs Crea una restricció d'igualtat entre dues línies o entre cercles i arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Restricció horitzontal - + Create a horizontal constraint on the selected item Crea una restricció horitzontal en l'element seleccionat @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Restricció d'alineació interna - + Constrains an element to be aligned with the internal geometry of another element Restringeix un element per a alinear-lo amb la geometria interna d'un altre element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Restricció de bloqueig - + Create a lock constraint on the selected item Crea una restricció de bloqueig en l'element seleccionat @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Restricció de parel·lelisme - + Create a parallel constraint between two lines Crea una restricció de paral·lelisme entre dues línies @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Restricció de perpendicularitat - + Create a perpendicular constraint between two lines Crea una restricció de perpendicularitat entre dues línies @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Restricció d'un punt sobre l'objecte - + Fix a point onto an object Fixa un punt sobre un objecte @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Restricció del radi - + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Restricció de la refracció (llei d'Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Crea una restricció de llei de refracció (llei d'Snell) entre dos extrems dels raigs i una aresta com a interfície. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Restricció de simetria - + Create a symmetry constraint between two points with respect to a line or a third point Crea una restricció de simetria entre dos punts respecte a una línia o a un tercer punt @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Restricció tangent - + Create a tangent constraint between two entities Crea una restricció tangent entre dues entitats @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Restricció veertical - + Create a vertical constraint on the selected item Crea una restricció vertical en l'element seleccionat @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Crea un arc donats tres punts - + Create an arc by its end points and a point along the arc Crea un arc donats els extrems i un punt al llarg de l'arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Crea un cercle donats tres punts - + Create a circle by 3 perimeter points Crea un cercle donats tres punts del perímetre @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Crea un arc donat el centre - + Create an arc by its center and by its end points Crea un arc donats el centre i els extrems @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Crea un arc d'el·lipse - + Create an arc of ellipse in the sketch Crea un arc d'el·lipse en l'esbós @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Crea un arc d'hipèrbola - + Create an arc of hyperbola in the sketch Crea un arc d'hipèrbola en l'esbós @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Crea un arc de paràbola - + Create an arc of parabola in the sketch Crea un arc de paràbola en l'esbós @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Crea un B-spline - + Create a B-spline via control points in the sketch. Crear un B-spline mitjançant punts de control en el dibuix. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Crea un cercle - + Create a circle in the sketch Crear un cercle en el dibuix @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Crea una línia d'esborrany - + Create a draft line in the sketch Crear una línia d'esborrany en el dibuix @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Crear l'el·lipse per 3 punts - + Create an ellipse by 3 points in the sketch Crear una el·lipse els 3 punts en el dibuix @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Crear el·lipse pel centre - + Create an ellipse by center in the sketch Crear una el·lipse pel centre en el dibuix @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Crear Filet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Crear heptàgon - + Create a heptagon in the sketch Crear un heptàgon en el dibuix @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Crear hexàgon - + Create a hexagon in the sketch Crear un hexàgon en el dibuix @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Crear la línia - + Create a line in the sketch Crear una línia en el dibuix @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Crear octàgon - + Create an octagon in the sketch Crear un octàgon en el dibuix @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Crear Pentàgon - + Create a pentagon in the sketch Crear un pentàgon a l'esbós @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Crea un B-spline periòdic - + Create a periodic B-spline via control points in the sketch. Crear un B-spline periòdiques mitjançant punts de control en el esbos. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Crear punt - + Create a point in the sketch Crear un punt en el dibuix @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Crear polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour Crear un polyline en el dibuix. Estic 'M' cicles de comportament @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Crear rectangle - + Create a rectangle in the sketch Crear un rectangle en el dibuix @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Crear polígon regular - + Create a regular polygon in the sketch Crea un polígon regular en l'esbós @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Crear ranura - + Create a slot in the sketch Crear una ranura en el dibuix @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Crear quadrats - + Create a square in the sketch Crear un quadrat en el dibuix @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Crear text - + Create text in the sketch Crear text en el dibuix @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Crear triangle equilàter - + Create an equilateral triangle in the sketch Crear un triangle equilàter en el dibuix @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Estén una aresta - + Extend an edge with respect to the picked position Estén una aresta respecte a la posició seleccionada @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometria externa - + Create an edge linked to an external geometry Crear un vertex vinculat a una geometria externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Activa/desactiva la restricció - + Toggles activate/deactivate state for selected constraints Activa/desactiva l'estat de les restriccions seleccionades @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Commuta entre restricció guia/referència - + Toggles the toolbar or selected constraints to/from reference mode Commuta la barra d'eines o les restriccions seleccionades al/des del mode de construcció @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Retalla l'aresta - + Trim an edge with respect to the picked position Retalla una aresta respecte a la posició seleccionada @@ -1952,47 +1952,47 @@ Error de restricció: esbós irresoluble si s'apliquen restriccions d'igualtat. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. No s'ha trobat la intersecció de les corbes. Probar d'afegir una restricció coincident entre els vèrtexs de les corbes que esteu intentant arrodonir. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Aquesta versió d' OCE/OCC no permet operacions de nus. Necessiteu 6.9.0 o posteriors. - + BSpline Geometry Index (GeoID) is out of bounds. l'index de geometria BSpline (GeoID) esta fora de les restriccions. - + You are requesting no change in knot multiplicity. Se us ha demanat que no canvieu la multiplicitat del nus. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'índex de geometria (GeoId) proporcionada no és una corba de B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'índex del nus és fora dels límits. Tingueu en compte que d'acord amb la notació d'OCC, el primer nus té l'índex 1 i no zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicitat no pot augmentar més enllà del grau de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicitat no es pot reduir més enllà de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC no pot reduir la multiplicitat dins de la tolerància màxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Seleccioneu aresta/es de l'esbós - - - - + + + + Dimensional constraint Restricció de dimensió @@ -2232,273 +2232,273 @@ Un dels elements seleccionats ha d'estar en l'esbós - - + + Select an edge from the sketch. Seleccioneu una aresta de l'esbós. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Restricció impossible - - - - + + + + The selected edge is not a line segment L'aresta seleccionada no és un segment de línia - - - - - - + + + + + + Double constraint Restricció doble - - - - + + + + The selected edge already has a horizontal constraint! La vora seleccionat ja té una restricció horitzontal! - - - - + + + + The selected edge already has a vertical constraint! La vora seleccionat ja té una restricció vertical! - - - - - - + + + + + + The selected edge already has a Block constraint! La vora seleccionat ja té una restricció de bloc! - + The selected item(s) can't accept a horizontal constraint! El/s element/s seleccionat/s no poden acceptar una restricció horitzontal! - + There are more than one fixed point selected. Select a maximum of one fixed point! Hi ha més d'un punt fix seleccionat. Seleccioneu un màxim d'un punt fix! - + The selected item(s) can't accept a vertical constraint! El/s element/s seleccionat/s no poden acceptar una restricció vertical! - + There are more than one fixed points selected. Select a maximum of one fixed point! Hi ha més d'un fix punts seleccionats. Seleccioneu un màxim d'un punt fix! - - + + Select vertices from the sketch. Seleccioneu vèrtexs de l'esbós. - + Select one vertex from the sketch other than the origin. Seleccioneu un vèrtex de l'esbós l'origen. - + Select only vertices from the sketch. The last selected vertex may be the origin. Seleccioneu només vèrtexs de l'esbós. L'últim vèrtex seleccionat pot ser l'origen. - + Wrong solver status Estat del Solver incorrecte - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. No es pot afegir una restricció de bloc si l'esbós no està resolt o hi ha un error redundant o restriccions en conflicte. - + Select one edge from the sketch. Seleccioneu una aresta de l'esbós. - + Select only edges from the sketch. Seleccioneu sols arestes de l'esbós. - - - - - - - + + + + + + + Error Error - + Select two or more points from the sketch. Seleccioneu una o més punts de l'esbós. - - + + Select two or more vertexes from the sketch. Seleccioneu un o més vèrtexs de l'esbós. - - + + Constraint Substitution Substitucions de restricions - + Endpoint to endpoint tangency was applied instead. En el seu lloc s'ha aplicat una tangència entre extrems. - + Select vertexes from the sketch. Seleccioneu vèrtexs de l'esbós. - - + + Select exactly one line or one point and one line or two points from the sketch. Seleccioneu únicament una línia o un punt i una línia o dos punts de l'esbós. - + Cannot add a length constraint on an axis! No es pot afegir una restricció de longitud sobre un eix! - + This constraint does not make sense for non-linear curves Aquesta restricció no té sentit per a corbes no lineals - - - - - - + + + + + + Select the right things from the sketch. Seleccioneu els elements correctes de l'esbós. - - + + Point on B-spline edge currently unsupported. Actualment no s'admet un punt sobre la vora del B-spline. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Cap dels punts seleccionats estaven limitats a les respectives corbes, perquè són peces del mateix element o perquè són tant geometria externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Seleccioneu o un punt i diverses corbes, o una corba i diversos punts. Heu seleccionat Corbes %1 i %2 punts. - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccioneu únicament una línia o fins a dos punts de l'esbós. - + Cannot add a horizontal length constraint on an axis! No es pot afegir una restricció de longitud horitzontal sobre un eix! - + Cannot add a fixed x-coordinate constraint on the origin point! No es pot afegir una limitació coordenada x fixa en el punt d'origen! - - + + This constraint only makes sense on a line segment or a pair of points Aquesta restricció només té sentit sobre un segment de línia o un parell de punts - + Cannot add a vertical length constraint on an axis! No es pot afegir una restricció de longitud vertical sobre un eix! - + Cannot add a fixed y-coordinate constraint on the origin point! No es pot afegir una limitació coordenada x fixa en el punt d'origen! - + Select two or more lines from the sketch. Seleccioneu una o més línies de l'esbós. - - + + Select at least two lines from the sketch. Seleccioneu almenys dues línies de l'esbós. - + Select a valid line Seleccioneu una línia vàlida - - + + The selected edge is not a valid line L'aresta seleccionada no és una línia vàlida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2506,45 +2506,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. perpendicular constraint Seleccioneu alguna geometria de l'esbós. - + Wrong number of selected objects! perpendicular constraint El nombre d'objectes seleccionats és incorrecte! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Amb 3 objectes, hi ha d'haver 2 corbes i 1 punt. - - + + Cannot add a perpendicularity constraint at an unconnected point! No es pot afegir una restricció de perpendicularitat en un punt no connectat! - - - + + + Perpendicular to B-spline edge currently unsupported. Actualment no s'admet una perpendicular a la vora del B-spline. - - + + One of the selected edges should be a line. Una de les arestes seleccionades ha de ser una línia. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2552,249 +2552,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. tangent constraint Seleccioneu alguna geometria de l'esbós. - + Wrong number of selected objects! tangent constraint El nombre d'objectes seleccionats és incorrecte! - - - + + + Cannot add a tangency constraint at an unconnected point! No es pot afegir una restricció de tangència en un punt no connectat! - - - + + + Tangency to B-spline edge currently unsupported. Actualment no s'admet la tangència a la vora del B-spline. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. S'ha aplicat una tangència entre extrems. S'han suprimit les restriccions coincidents. - - - - + + + + Select one or more arcs or circles from the sketch. Seleccioneu un o diversos arcs o cercles de l'esbós. - - + + Constrain equal Restricció igual - + Do you want to share the same radius for all selected elements? Voleu compartir el mateix radi per a tots els elements seleccionats? - - + + Constraint only applies to arcs or circles. La restricció només s'aplica a arcs i cercles. - + Do you want to share the same diameter for all selected elements? Voleu compartir el mateix diàmetre per a tots els elements seleccionats? - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccioneu una o dues línies de l'esbós. O seleccionar dues vores i un punt. - - + + Parallel lines Línies paral·leles - - + + An angle constraint cannot be set for two parallel lines. Una restricció d'angle no es pot definir per dues línies paral·leles. - + Cannot add an angle constraint on an axis! No es pot afegir una restricció d'angle sobre un eix! - + Select two edges from the sketch. Seleccioneu dues arestes de l'esbós. - - + + Select two or more compatible edges Seleccioneu dues o més arestes compatibles - + Sketch axes cannot be used in equality constraints Els eixos de l'esbós no es poden utilitzar en les restriccions d'igualtat - + Equality for B-spline edge currently unsupported. Actualment no s'admet la igualtat per a la vora del B-spline. - - + + Select two or more edges of similar type Seleccioneu una o més arestes de tipus similar - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccioneu de l'esbós dos punts i una línia de simetria, dos punts i un punt de simetria o una línia i un punt de simetria. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! No es pot afegir una restricció de simetria entre una línia i els seus extrems! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccioneu dos punts finals de línies a actuar com raigs i un avantatge que representa una frontera. El primer punt seleccionat correspon a índex n1, i n2 - segon i valor datum estableix la relació n2/n1. - + Selected objects are not just geometry from one sketch. Els objectes seleccionats no són només geometria d'un esbós. - + Number of selected objects is not 3 (is %1). Nombre d'objectes seleccionats no és 3 (és %1). - + Cannot create constraint with external geometry only!! No es poden crear restriccions únicament amb una geometria externa!! - + Incompatible geometry is selected! Geometria incompatible és seleccionat! - + SnellsLaw on B-spline edge currently unsupported. Actualment no s'admet la llei d'Snells sobre la vora del B-spline. - - + + Select at least one ellipse and one edge from the sketch. Seleccioneu almenys una el·lipse i un tall de l'esbós. - + Sketch axes cannot be used in internal alignment constraint Els eixos de l'esbós no es poden utilitzar en la restricció d'alineació interna - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Internament no pot Restrigir una el·lipse sobre altre el·lipse. Seleccioneu només una el·lipse. - - + + Maximum 2 points are supported. S'admeten com a màxim 2 punts. - - + + Maximum 2 lines are supported. S'admeten com a màxim 2 línies. - - + + Nothing to constrain No hi ha res per restringir - + Currently all internal geometry of the ellipse is already exposed. Actualment tota la geometria interna de l'el·lipse ja està exposada. - - - - + + + + Extra elements Elements addicionals - - - + + + More elements than possible for the given ellipse were provided. These were ignored. S'han proporcionat més dels elements possibles per a l'el·lipse donada. S'ignoraran. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. No podeu restringir internament un arc d'el·lipse sobre un altre arc d'el·lipse. Seleccioneu-ne sols un. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. No podeu restringir internament un arc d'el·lipse sobre un altre arc d'el·lipse. Seleccioneu un únic arc d'el·lipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Actualment tota la geometria interna de l'arc d'el·lipse ja està exposada. - + More elements than possible for the given arc of ellipse were provided. These were ignored. S'han proporcionat més dels elements possibles per a l'arc d'el·lipse donat. S'ignoraran. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actualment la geometria interna només s'admet per a l'el·lipse i l'arc d'el·lipse. L'últim element seleccionat ha de ser una el·lipse o un arc d'el·lipse. - - - - - + + + + + @@ -2802,7 +2802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleccioneu restriccions de l'esbós. - + CAD Kernel Error Error del nucli del CAD @@ -2937,42 +2937,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. La còpia pot provocar una dependència circular. - + This object is in another document. Aquest objecte és en un altre document. - + This object belongs to another body. Hold Ctrl to allow cross-references. Aquest objecte pertany a un altre cos. Manteniu la tecla Ctrl per a permetre les referències creuades. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Aquest objecte pertany a un altre cos i conté geometria externa. No es permeten les referències creuades. - + This object belongs to another part. Aquest objecte pertany a una altra peça. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. L'esbós seleccionat no és paral·lel a aquest esbós. Manteniu les tecles Ctrl+Alt per a permetre esbossos no paral·lels. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Els eixos XY de l'esbós seleccionat no tenen la mateixa direcció en aquest esbós. Manteniu les tecles Ctrl+Alt per a ignorar-ho. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. L'origen de l'esbós seleccionat no està alineat amb l'origen d'aquest esbós. Manteniu les tecles Ctrl+Alt per a ignorar-ho. @@ -3058,8 +3058,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insereix un radi - - + + Radius: Radi: @@ -3070,8 +3070,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insereix un diàmetre - - + + Diameter: Diàmetre: @@ -3099,24 +3099,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Longitud: - - + + Change radius Canvia els radis - - + + Change diameter Canvia el diàmetre - + Refractive index ratio Índex de refracció - + Ratio n2/n1: Relació n2/n1: @@ -3132,22 +3132,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. L'enllaç provocarà una dependència circular. - + This object is in another document. Aquest objecte és en un altre document. - + This object belongs to another body, can't link. Aquest objecte pertany a un altre cos, no es pot enllaçar. - + This object belongs to another part, can't link. Aquest objecte no es pot enllaçar perquè pertany a una altra peça. @@ -3188,8 +3188,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Sense nom @@ -3895,6 +3895,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Totes les restriccions vinculades a una geometria externa s'han suprimit. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4241,70 +4261,77 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Validació de l'esbós - + Invalid constraints Restriccions invàlides - - + + + Fix Repara - - + + + Find Cerca - + Delete constraints to external geom. Suprimeix les restriccions vinculades a la geometria externa. - + Missing coincidences Coincidències perdudes - + Tolerance: Tolerància: - + Highlight open vertexes Ressalta els vèrtexs oberts - + Ignore construction geometry Ignora la geometria de construcció + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometria externa inversa - + Swap endpoints in constraints Intercanvia els extrems de les restriccions - + Constraint orientation locking Restricció de bloqueig d'orientació - + Enable/Update Activa/actualitza - + Disable Desactiva @@ -4312,104 +4339,104 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l SketcherGui::ViewProviderSketch - + Edit sketch Editar croquis - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch L'esbós no és vàlid - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. L'esbós no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + Empty sketch L'esbós és buit - + Over-constrained sketch Esbós sobre-restringit - - - + + + (click to select) (feu clic per a seleccionar) - + Sketch contains conflicting constraints L'esbós conté restriccions amb conflictes - + Sketch contains redundant constraints L'esbós conté restriccions redundants - + Fully constrained sketch Esbós completament restringit - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Esbós sota restriccions amb<a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grau</span></a> de llibertat - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Esbós sota restriccions amb<a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graus</span></a> de llibertat - + Solved in %1 sec Solucionat en %1 s - + Unsolved (%1 sec) Sense solucionar (%1 s) @@ -4498,8 +4525,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -4507,8 +4534,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -4525,8 +4552,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Crea un arc donats els extrems i un punt al llarg de l'arc @@ -4534,8 +4561,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Crea un cercle donats tres punts de la vora @@ -4543,8 +4570,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArc - - + + Create an arc by its center and by its end points Crea un arc donats el centre i els extrems @@ -4552,8 +4579,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Crea un arc d'el·lipse donats el centre, el radi major i els extrems @@ -4561,8 +4588,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Crea un arc d'hipèrbola donats el centre, el radi major i els extrems @@ -4570,8 +4597,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Crea un arc de paràbola donats el focus, el vèrtex i els extrems @@ -4579,13 +4606,13 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateBSpline - + B-spline by control points B-spline per punts de control - - + + Create a B-spline by control points Crea un B-spline donats els punts de control @@ -4593,8 +4620,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Crea un cercle donats el centre i un punt de la vora @@ -4602,8 +4629,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Crea una el·lipse donats el periàpside, l'apoàpside i el radi menor @@ -4611,8 +4638,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Crea una el·lipse donats el centre, el radi major i un punt @@ -4620,8 +4647,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Crea un heptàgon donats el centre i un vèrtex @@ -4629,8 +4656,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Crea un hexàgon donats el centre i un vèrtex @@ -4638,14 +4665,14 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Crea un octàgon donats el centre i un vèrtex - - + + Create a regular polygon by its center and by one corner Crea un polígon regular donats el centre i un vèrtex @@ -4653,8 +4680,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Crea un pentàgon donats el centre i un vèrtex @@ -4662,8 +4689,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateSquare - - + + Create a square by its center and by one corner Crea un quadrat donats el centre i un vèrtex @@ -4671,8 +4698,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Crea un triangle equilàter donats el centre i un vèrtex @@ -4680,13 +4707,13 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periòdic per punts de control - - + + Create a periodic B-spline by control points Crea un B-spline periòdic donats els punts de control diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm index 683236c7d5..57c58b8778 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index dcf2153bad..ed90ab5980 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Kopie náčrtu - + Copies the geometry of another sketch Zkopíruje geometrii jiného náčrtu @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Vazba oblouku nebo kružnice - + Constrain an arc or a circle Vazba oblouku nebo kružnice - + Constrain radius Zadá poloměr - + Constrain diameter Vazba průměru @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Vytvoř oblouk - + Create an arc in the sketcher Vytvoří oblouk v náčrtu - + Center and end points Střed a koncové body - + End points and rim point Koncové body a okrajový bod @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Vytvoří B-splajn - + Create a B-spline in the sketch Vytvoří B-splajn v náčrtu @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Vytvoř kružnici - + Create a circle in the sketcher Vytvoří kružnici v náčrtu - + Center and rim point Střed a okrajový bod - + 3 rim points 3 okrajové body @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Vytvoří kuželosečku - + Create a conic in the sketch Vytvoří kuželosečku v náčrtu - + Ellipse by center, major radius, point Elipsa pomocí středu, hlavní poloosy a bodu - + Ellipse by Periapsis, apoapsis, minor radius Elipsa pomocí perihélia, afélia a vedlejší poloosy - + Arc of ellipse by center, major radius, endpoints Oblouk elipsy pomocí středu, hlavní poloosy a koncových bodů - + Arc of hyperbola by center, major radius, endpoints Oblouk hyperboly od středu, hlavní poloměr, koncové body - + Arc of parabola by focus, vertex, endpoints Oblouk paraboly pomocí ohniska, vrscholu, koncových bodů @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Vytvoří pravidelný mnohoúhelník - + Create a regular polygon in the sketcher Vytvoří pravidelný mnohoúhelník v náčrtu - + Triangle Trojúhelník - + Square Čtverec - + Pentagon Pětiúhelník - + Hexagon Šestiúhelník - + Heptagon Sedmiúhelník - + Octagon Osmiúhelník - + Regular Polygon Pravidelný mnohoúhelník @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Vazba úhlu - + Fix the angle of a line or the angle between two lines Zadá úhel čáry nebo úhel mezi dvěma čarami @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Bloková vazba - + Create a Block constraint on the selected item Vytvořit blokovou vazbu na vybrané položce @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Vazba totožnosti - + Create a coincident constraint on the selected item Vytvoř vazbu totožnosti na vybranou položku @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Vazba průměru - + Fix the diameter of a circle or an arc Zadá průměr kružnice nebo oblouku @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Vazba vzdálenosti - + Fix a length of a line or the distance between a line and a vertex Fixuj délku úsečky nebo vzdálenost mezi úsečkou a bodem @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Zadá vodorovnou vzdálenost mezi dvěma body nebo konci čáry @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Zadá svislou vzdálenost mezi dvěma body nebo konci čáry @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Zadat jako shodné - + Create an equality constraint between two lines or between circles and arcs Vytvoří zadání rovnosti mezi dvěma čarami, kruhy nebo oblouky @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Vazba horizontálně - + Create a horizontal constraint on the selected item Vytvoř vodorovnou vazbu na vybranou položku @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Vyzba vnitřní uspořádání - + Constrains an element to be aligned with the internal geometry of another element Vytvoří vazbu elementu s vnitřní geometrií jiného elementu @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Vazba uzamknout - + Create a lock constraint on the selected item Vytvoří zadání zamknutí vybrané položky @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Vazba rovnoběžnosti - + Create a parallel constraint between two lines Vytvoř vazbu rovnoběžnosti mezi dvěma úsečkami @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Zadání kolmosti - + Create a perpendicular constraint between two lines Vytvoří kolmou vazbu mezi dvěma čarami @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Zadá bod na objektu - + Fix a point onto an object Umístí bod na objekt @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Zadá poloměr - + Fix the radius of a circle or an arc Zadá poloměr kružnice nebo oblouku @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Vazba refrakce (Snellův zákon) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Vytvoří refrakční (Snellův) zákon jako vazbu mezi koncovými body paprsku a hrany tvořící rozhraní. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Zadá jako symetrické - + Create a symmetry constraint between two points with respect to a line or a third point Vytvoří symetrikcou vazbu mezi dvěma body vzhledem k čáře nebo třetímu bodu @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Zadá tečnost - + Create a tangent constraint between two entities Zadá tečnost mezi dvěma objekty @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Vazba svisle - + Create a vertical constraint on the selected item Vytvoří vazbu svislosti na vybranou položku @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Vytvoř oblouk třemi body - + Create an arc by its end points and a point along the arc Vytvoří oblouk jeho koncovými body a bodem podél oblouku @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Vytvoř kružnici třemi body - + Create a circle by 3 perimeter points Vytvoř kružnici třemi obvodovými body @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Vytvoř oblouk podle středu - + Create an arc by its center and by its end points Vytvoří oblouk podle jeho středu a skrz jeho koncové body @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Vytvoří oblouk elipsy - + Create an arc of ellipse in the sketch Vytvoří oblouk elipsy v náčrtu @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Vytvořit oblouk hyperboly - + Create an arc of hyperbola in the sketch Vytvořit oblouk hyperboly ve skice @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Vytvoří oblouk paraboly - + Create an arc of parabola in the sketch Vytvoří oblouk paraboly v náčrtu @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Vytvoří B-splajn - + Create a B-spline via control points in the sketch. Vytvořit B-splajn pomocí kontrolních bodů v náčrtu. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Vytvoř kružnici - + Create a circle in the sketch Vytvoří kružnici v náčrtu @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Vytvoř pomocnou úsečku - + Create a draft line in the sketch Vytvoří pomocnou úsečku v náčrtu @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Vytvoří elipsu pomocí 3 bodů - + Create an ellipse by 3 points in the sketch Vytvoří elipsu pomocí 3 bodů v náčrtu @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Vytvoří elipsu pomocí středu - + Create an ellipse by center in the sketch Vytvoří elipsu pomocí středu v náčrtu @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Vytvořit zaoblení - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Vytvoří sedmiúhelník - + Create a heptagon in the sketch Vytvoří sedmiúhelník v náčrtu @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Vytvoří šestiúhelník - + Create a hexagon in the sketch Vytvoří šestiúhelník v náčrtu @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Vytvoř úsečku - + Create a line in the sketch Vytvoří úsečku v náčrtu @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Vytvoří osmiúhelník - + Create an octagon in the sketch Vytvoří osmiúhelník v náčrtu @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Vytvoří pětiúhelník - + Create a pentagon in the sketch Vytvoří pětiúhelník v náčrtu @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Vytvoří periodický B-splajn - + Create a periodic B-spline via control points in the sketch. Vytvořit periodický B-splajn pomocí kontrolních bodů v náčrtu. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Vytvoř bod - + Create a point in the sketch Vytvoří bod v náčrtu @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Vytvoř lomenou čáru - + Create a polyline in the sketch. 'M' Key cycles behaviour Vytvoří lomenou čáru v náčrtu. Klávesa 'M' mění chování @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Vytvoř obdélník - + Create a rectangle in the sketch Vytvoří obdélník v náčrtu @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Vytvoří pravidelný mnohoúhelník - + Create a regular polygon in the sketch Vytvoří pravidelný mnohoúhelník v náčrtu @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Vytvoř drážku - + Create a slot in the sketch Vytvoří drážku ve skice @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Vytvoří čtverec - + Create a square in the sketch Vytvoří čtverec v náčrtu @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Vytvoř text - + Create text in the sketch Vytvoří text v náčrtu @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Vytvoří rovnostranný trojúhelník - + Create an equilateral triangle in the sketch Vytvoří rovnostranný trojúhelník v náčrtu @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Prodloužit hranu - + Extend an edge with respect to the picked position Prodlouží hranu vzhledem k vybrané pozici @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Externí geometrie - + Create an edge linked to an external geometry Vytvořit hranu spojenou s vnější geometií @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Aktivovat/deaktivovat vazbu - + Toggles activate/deactivate state for selected constraints Přepne aktivovaný/deaktivovaný stav vybraných vazeb @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Přepne refrenčí / řízenou vazbu - + Toggles the toolbar or selected constraints to/from reference mode Přepne nástrojový panel nebo vybranou vazbu z/do referenčního módu @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Oříznout hranu - + Trim an edge with respect to the picked position Oříznout hranu podle vybrané polohy @@ -1952,47 +1952,47 @@ Chyba automatických vazeb: Neřešitelný náčrt po aplikaci vazeb rovnosti. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Nelze odhadnout průsečík křivek. Zkuste přidat vazbu totožnosti mezi vrcholy křivek, které chcete zaoblit. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Tato verze OCE/OCC nepodporuje operaci uzel. Potřebujete 6.9.0 nebo vyšší. - + BSpline Geometry Index (GeoID) is out of bounds. Geometrický index (GeoID) B-splajnu je mimo meze. - + You are requesting no change in knot multiplicity. Nepožadujete změnu v násobnosti uzlů. - + The Geometry Index (GeoId) provided is not a B-spline curve. Daný geometrický index (GeoId) neodpovídá B-splajn křivce. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Index uzlu je mimo hranice. Všimněte si, že v souladu s OCC zápisem je index prvního uzlu 1 a ne 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Násobnost nemůže být zvýšena nad stupeň B-splajnu. - + The multiplicity cannot be decreased beyond zero. Násobnost nemůže být snížena pod nulu. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC není schopno snížit násobnost na maximální toleranci. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Vyberte hrany ze skicy. - - - - + + + + Dimensional constraint Vazba vzdálenosti @@ -2232,273 +2232,273 @@ Jeden z vybraných musí být na Náčrt - - + + Select an edge from the sketch. Vyber hranu z náčrtu. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Nemožné omezení - - - - + + + + The selected edge is not a line segment Vybraný okraj není segment čáry - - - - - - + + + + + + Double constraint Dvojité omezení - - - - + + + + The selected edge already has a horizontal constraint! Vybraná hrana již má horizontální vazbu! - - - - + + + + The selected edge already has a vertical constraint! Vybraná hrana již má vertikální vazbu! - - - - - - + + + + + + The selected edge already has a Block constraint! Vybraná hrana již má blokovou vazbu! - + The selected item(s) can't accept a horizontal constraint! Vybrané položky nemohou přijmout vodorovnou vazbu! - + There are more than one fixed point selected. Select a maximum of one fixed point! Je vybráno více pevných bodů. Vyberte nejvýše jeden pevný bod! - + The selected item(s) can't accept a vertical constraint! Vybrané položky nemohou přijmout svislou vazbu! - + There are more than one fixed points selected. Select a maximum of one fixed point! Je vybráno více pevných bodů. Vyberte nejvýše jeden pevný bod! - - + + Select vertices from the sketch. Vyberte vrcholy z náčrtu. - + Select one vertex from the sketch other than the origin. Vyberte jeden vrchol z náčrtu jiný než počátek. - + Select only vertices from the sketch. The last selected vertex may be the origin. Vyberte jen vrcholy z náčrtu. Poslední vybraný vrchol může být počátek. - + Wrong solver status Špatný status řešiče - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Bloková vazba nemůže být přidána, pokud je náčrt nevyřešený nebo pokud obsahuje nadbytečné či konfliktní vazby. - + Select one edge from the sketch. Vyberte jednu hranu z náčrtu. - + Select only edges from the sketch. Vyberte pouze hrany z náčrtu. - - - - - - - + + + + + + + Error Chyba - + Select two or more points from the sketch. Vyberte dva nebo více bodů z náčrtu. - - + + Select two or more vertexes from the sketch. Vyberte dva nebo více vrcholů z náčrtu. - - + + Constraint Substitution Nahrazení vazby - + Endpoint to endpoint tangency was applied instead. Namísto toho byla aplikována tečnost v koncových bodech. - + Select vertexes from the sketch. Vyberte vrcholy ze skici. - - + + Select exactly one line or one point and one line or two points from the sketch. Vyberte právě jednu úsečku nebo jeden bod a úsečku nebo dva body ze skici. - + Cannot add a length constraint on an axis! Nelze přidat délkovou vazbu osy! - + This constraint does not make sense for non-linear curves Tato vazba nemá smysl pro nelineární křivky - - - - - - + + + + + + Select the right things from the sketch. Výberte správné věci z náčrtu. - - + + Point on B-spline edge currently unsupported. Bod na hraně B-splajnu momentálně není podporován. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Žádný z vybraných bodů nebyl napojen na příslušnou křivku, protože jsou buď součístí téhož elementu nebo tvoří oba vnější geometrii. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Vyberte buď jeden bod a několik křivek nebo jednu křivku a několik bodů. Máte vybráno %1 křivek a %2 bodů. - - - - + + + + Select exactly one line or up to two points from the sketch. Vyberte právě jednu úsečku nebo až dva body ze skici. - + Cannot add a horizontal length constraint on an axis! Nelze přidat vodorovnou délkovou vazbu osy! - + Cannot add a fixed x-coordinate constraint on the origin point! Nelze přidat vazbu souřadnice x na počátek souřadnic! - - + + This constraint only makes sense on a line segment or a pair of points Tato vazba má smysl pouze na segmentu čáry nebo na dvojici bodů - + Cannot add a vertical length constraint on an axis! Nelze přidat svislou délkovou vazbu osy! - + Cannot add a fixed y-coordinate constraint on the origin point! Nelze přidat vazbu souřadnice y na počátek souřadnic! - + Select two or more lines from the sketch. Vyberte dvě nebo více úseček ze skici. - - + + Select at least two lines from the sketch. Vyberte nejméně dvě úsečky ze skici. - + Select a valid line Vyberte platnou úsečku - - + + The selected edge is not a valid line Vybraná hrana není platnou úsečkou - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. - + Select some geometry from the sketch. perpendicular constraint Vyberte geometrii z náčrtu. - + Wrong number of selected objects! perpendicular constraint Nesprávný počet vybraných objektů! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Mezi třemi objekty musí být 2 křivky a 1 bod. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nelze přidat kolmou vazbu na volný bod! - - - + + + Perpendicular to B-spline edge currently unsupported. Kolmost na hranu B-splajnu momentálně není podpofována. - - + + One of the selected edges should be a line. Jedna z vybraných hran by měla být úsečka. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. - + Select some geometry from the sketch. tangent constraint Vyberte geometrii z náčrtu. - + Wrong number of selected objects! tangent constraint Nesprávný počet vybraných objektů! - - - + + + Cannot add a tangency constraint at an unconnected point! Nelze přidat tangentní vazbu na volný bod! - - - + + + Tangency to B-spline edge currently unsupported. Tangentnost na hranu B-splajnu momentálně není podporována. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Byla aplikována tečnost v koncových bodech. Vazba shodnosti byla smazána. - - - - + + + + Select one or more arcs or circles from the sketch. Vyberte jeden nebo více oblouků nebo kružnic z náčrtu. - - + + Constrain equal Zadat jako shodné - + Do you want to share the same radius for all selected elements? Má být poloměr stejný pro všechny vybrané elementy? - - + + Constraint only applies to arcs or circles. Vazbu lze použít jen na oblouky nebo kružnice. - + Do you want to share the same diameter for all selected elements? Má být stejný stejný pro všechny vybrané elementy? - - + + Select one or two lines from the sketch. Or select two edges and a point. Vyberte jednu nebo dvě úsečky z náčrtu. Nebo vyberte dvě hrany a bod. - - + + Parallel lines Rovnoběžné úsečky - - + + An angle constraint cannot be set for two parallel lines. Úhlová vazba nemůže být nastavena pro dvě rovnoběžné úsečky. - + Cannot add an angle constraint on an axis! Nelze přidat úhlovou vazbu na osu! - + Select two edges from the sketch. Vyberte dvě hrany ze skici. - - + + Select two or more compatible edges Vyberte dvě nebo více kompatibilních hran - + Sketch axes cannot be used in equality constraints Osy skici nemohou být použity ve vazbě rovnosti - + Equality for B-spline edge currently unsupported. Shodnost pro hranu B-splajnu momentálně není podporována. - - + + Select two or more edges of similar type Vyberte dvě nebo více hran stejného typu - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Vyberte dva body a čáru symetrie, dva body a bod symetrie nebo čáru a bod symetrie z náčrtu. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Nelze přidat symetrickou vazbu mezi úsečku a její koncový bod! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Vyberte koncové body úsečky představující paprsek a hranu reprezentující rozhraní. První vybraný bod odpovídá intexu n1, druhý indexu n2, zadává se hodnota poměru n2/n1. - + Selected objects are not just geometry from one sketch. Vybrané objekty nejsou geometrií jednoho náčrtu. - + Number of selected objects is not 3 (is %1). Počet vybraných objektu není 3 (vybráno je %1). - + Cannot create constraint with external geometry only!! Nejde vytvořit vazbu jen s vnější geometrií!! - + Incompatible geometry is selected! Je vybrána nekompatibilní geometrie! - + SnellsLaw on B-spline edge currently unsupported. Snellův zákon na hraně B-splajnu momentálně není podporován. - - + + Select at least one ellipse and one edge from the sketch. Vyberte alespoň jednu elipsu a jednu hranu z náčrtu. - + Sketch axes cannot be used in internal alignment constraint Osy náčrtu nelze použít ve vazbách vnitřního uspořádání - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Nemůžete vnitřně vazbit jednu elipsu k druhé. Vyberte pouze jednu elipsu. - - + + Maximum 2 points are supported. Jsou podporovány maximálně 2 body. - - + + Maximum 2 lines are supported. Jsou podporovány maximálně dvě čáry. - - + + Nothing to constrain Není co vazbit - + Currently all internal geometry of the ellipse is already exposed. Momentálně je veškerá vnitřní geometrie elipsy odhalená. - - - - + + + + Extra elements Dodatečné elementy - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Bylo poskytnuto více elementů, než bylo pro danou elipsu možné. Tyto byly ignorovány. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Nemůžete vnitřně vazbit jeden oblouk elipsy k druhému. Vyberte pouze jeden oblouk elipsy. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Nemůžete vnitřně vazbit elipsu k oblouku elipsy. Vyberte pouze elipsu nebo oblouk elipsy. - + Currently all internal geometry of the arc of ellipse is already exposed. Momentálně je veškerá vnitřní geometrie oblouku elipsy odhalená. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Bylo poskytnuto více elementů, než bylo pro daný oblouk elipsy možné. Tyto byly ignorovány. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Momentálně je vnitřní geometrie podporována jen pro elipsu nebo oblouk elipsy. Naposledy vybraným elementem musí být elipsa nebo oblouk elipsy. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Vybrat vazbu/y z náčrtu. - + CAD Kernel Error Chyba jádra CADu @@ -2941,42 +2941,42 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Kopie náčrtu by způsobila kruhovou závislost. - + This object is in another document. Tento objekt je v jiném dokumentu. - + This object belongs to another body. Hold Ctrl to allow cross-references. Tento objekt patří k jinému tělu. Podržením Ctrl umožníte křížové odkazy. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Tento objekt patří do jiného těla a obsahuje externí geometrii. Křížové odkazy nejsou povolené. - + This object belongs to another part. Tento objekt patří k jiném dílu. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Vybraný náčrt není rovnoběžný s tímto náčrtem. Držte Ctrl+Alt pro povolení nerovnoběžných náčrtů. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Osy XY vybraného náčrtu nemají stejný směr jako u tohoto náčrtu. Podržte Ctrl+Alt pro ignorování. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Počátek vybraného náčrtu není zarovnaný s počátkem tohoto náčrtu. Podržte Ctrl+Alt pro ignorování. @@ -3062,8 +3062,8 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Vložit rádius - - + + Radius: Poloměr: @@ -3074,8 +3074,8 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Vložit průměr - - + + Diameter: Průměr: @@ -3103,24 +3103,24 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Délka: - - + + Change radius Změna poloměru - - + + Change diameter Změnit průměr - + Refractive index ratio Index lomu - + Ratio n2/n1: Poměr n2/n1: @@ -3136,22 +3136,22 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Toto propojení způsobí kruhovou závislost. - + This object is in another document. Tento objekt je v jiném dokumentu. - + This object belongs to another body, can't link. Tento objekt patří k jinému tělesu, proto nelze propojit. - + This object belongs to another part, can't link. Tento objekt patří do jiné části, nelze propojit. @@ -3192,8 +3192,8 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; SketcherGui::PropertyConstraintListItem - - + + Unnamed Nepojmenovaný @@ -3909,6 +3909,26 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. All constraints that deal with external geometry were deleted. Všechny vazby spojené s vnější geometrií byly smazány. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4218,7 +4238,7 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Rendering order (global) : - Rendering order (global) : + Pořadí vykreslování (globální) : @@ -4255,70 +4275,77 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Kontrola náčrtku - + Invalid constraints Neplatné vazby - - + + + Fix Opravit - - + + + Find Hledat - + Delete constraints to external geom. Smazat vazby k vnější geometrii. - + Missing coincidences Chybějící shody - + Tolerance: Tolerance: - + Highlight open vertexes Zvýraznit otevřené vrcholy - + Ignore construction geometry Ignorovat konstrukční geometrii + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Obrácená vnější geometrie - + Swap endpoints in constraints Vyměnit koncové body ve vazbách - + Constraint orientation locking Zamčení orientace vazby - + Enable/Update Zapnout / aktualizovat - + Disable Vypnout @@ -4326,104 +4353,104 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc SketcherGui::ViewProviderSketch - + Edit sketch Upravit skicu - + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - + Do you want to close this dialog? Chcete zavřít tento dialog? - + Invalid sketch Neplatný náčrt - + Do you want to open the sketch validation tool? Chcete otevřít nástroje pro ověření náčrtu? - + The sketch is invalid and cannot be edited. Náčrt není platný a nemůže být upravován. - + Please remove the following constraint: Odstraňte, prosím, následující vazbu: - + Please remove at least one of the following constraints: Odstraňte, prosím, alespoň jednu z následujících vazeb: - + Please remove the following redundant constraint: Odstraňte, prosím, následující nadbytečnou vazbu: - + Please remove the following redundant constraints: Odstraňte, prosím, následující nadbytečné vazby: - + Empty sketch Prázdný náčrt - + Over-constrained sketch Přeurčený náčrt - - - + + + (click to select) (klikněte pro vybrání) - + Sketch contains conflicting constraints Náčrt obsahuje konfliktní vazby - + Sketch contains redundant constraints Náčrt obsahuje nadbytečné vazby - + Fully constrained sketch Plně určený náčrt - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Nedovazbený náčrt s <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stupněm</span></a> volnosti - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Nedovazbený náčrt s <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 stupni</span></a> volnosti - + Solved in %1 sec Vyřešeno behem %1 s - + Unsolved (%1 sec) Nevyřešeno (%1 s) @@ -4512,8 +4539,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Zadá průměr kružnice nebo oblouku @@ -4521,8 +4548,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Zadá poloměr kružnice nebo oblouku @@ -4539,8 +4566,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Vytvoří oblouk jeho koncovými body a bodem podél oblouku @@ -4548,8 +4575,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Vytvoří kružnici třemi okrajovými body @@ -4557,8 +4584,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateArc - - + + Create an arc by its center and by its end points Vytvoří oblouk podle jeho středu a skrz jeho koncové body @@ -4566,8 +4593,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Vytvoří oblouk elipsy pomocí středu, hlavní poloosy a koncových bodů @@ -4575,8 +4602,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Vytvoří oblouk hyperboly pomocí středu, hlavního poloměru, koncových bodů @@ -4584,8 +4611,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Vytvoří oblouk paraboly pomocí ohniska, vrcholu, koncových bodů @@ -4593,13 +4620,13 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateBSpline - + B-spline by control points B-splajn pomocí kontrolních bodů - - + + Create a B-spline by control points Vytvoří B-splajn pomocí kontrolních bodů @@ -4607,8 +4634,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Vytvoří kružnici podle jeho středu a skrz okrajový bod @@ -4616,8 +4643,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Vytvoří elipsu pomocí perihélia, afélia a vedlejší poloosy @@ -4625,8 +4652,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Vytvoří elipsu pomocí středu, hlavní poloosy a bodu @@ -4634,8 +4661,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Vytvoří sedmiúhelník pomocí jeho středu a vrcholu @@ -4643,8 +4670,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Vytvoří šestiúhelník pomocí jeho středu a vrcholu @@ -4652,14 +4679,14 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Vytvoří osmiúhelník pomocí jeho středu a vrcholu - - + + Create a regular polygon by its center and by one corner Vyvtoří rovnostranný mnohoúhelník pomocí středu a jednoho rohu @@ -4667,8 +4694,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Vytvoří pětiúhelník pomocí jeho středu a vrcholu @@ -4676,8 +4703,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateSquare - - + + Create a square by its center and by one corner Vytvoří čtverec pomocí jeho středu a vrcholu @@ -4685,8 +4712,8 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Vytvoří pravidelný trojúhelník pomocí jeho středu a vrcholu @@ -4694,13 +4721,13 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodický B-splajn pomocí kontrolních bodů - - + + Create a periodic B-spline by control points Vytvoří periodický B-splajn pomocí kontrolních bodů diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index 3039a66367..a4bb5f59e3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index d5440ae4fd..a177125b87 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Skizze - + CarbonCopy Kopie - + Copies the geometry of another sketch Kopiert die Geometrie einer anderen Skizze @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Skizze - + Constrain arc or circle Bogen oder Kreis festlegen - + Constrain an arc or a circle Einen Bogen oder Kreis bemaßen - + Constrain radius Radius festlegen - + Constrain diameter Durchmesser festlegen @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Skizze - + Create arc Bogen erstellen - + Create an arc in the sketcher Einen Bogen in der Skizze erstellen - + Center and end points Mittel- und Endpunkte - + End points and rim point Endpunkte und Punkt auf Kreisbogen @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Skizze - + Create a B-spline B-Spline erstellen - + Create a B-spline in the sketch Einen B-Spline in der Skizze erstellen @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Skizze - + Create circle Kreis erstellen - + Create a circle in the sketcher Einen Kreis in der Skizze erstellen - + Center and rim point Mittelpunkt und Punkt auf Kreisbogen - + 3 rim points Drei Punkte auf Kreisbogen @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Skizze - + Create a conic Erstellen eines Kegelschnitts - + Create a conic in the sketch Ein Kegelschnitt in der Skizze erstellen - + Ellipse by center, major radius, point Ellipse durch Angabe von Mittelpunkt, Hauptradius und Punkt - + Ellipse by Periapsis, apoapsis, minor radius Ellipse durch Angabe von Periapsis, Apoapsis, kleinerem Radius - + Arc of ellipse by center, major radius, endpoints Ellipsen-Bogen durch Angabe von Zentrum, großem Radius, Endpunkte - + Arc of hyperbola by center, major radius, endpoints Hyperbel Bogen durch Mittelpunkt, Hauptradius, Endpunkte - + Arc of parabola by focus, vertex, endpoints Bogen der Parabel durch Fokus, Scheitelpunkt, Endpunkte @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Skizze - + Create regular polygon Regelmäßiges Polygon erstellen - + Create a regular polygon in the sketcher Erstelle ein regelmäßiges Polygon in der Skizze - + Triangle Dreieck - + Square Quadrat - + Pentagon Fünfeck - + Hexagon Sechseck - + Heptagon Siebeneck - + Octagon Achteck - + Regular Polygon Regelmäßiges Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Skizze - + Constrain angle Winkel festlegen - + Fix the angle of a line or the angle between two lines Winkel einer Linie oder zweier Linien festlegen @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Skizze - + Constrain Block Fixierung festlegen - + Create a Block constraint on the selected item Erzeuge eine Fixierbeschränkung auf dem ausgewählten Element @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Skizze - + Constrain coincident Koinzidenz erzwingen - + Create a coincident constraint on the selected item Eine Koinzidenzbeschränkung für das gewählte Element setzen @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Skizze - + Constrain diameter Durchmesser festlegen - + Fix the diameter of a circle or an arc Leget den Durchmesser eines Kreises oder Bogens fest @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Skizze - + Constrain distance Distanz festlegen - + Fix a length of a line or the distance between a line and a vertex Die Länge einer Linie oder den Abstand einer Linie und eines Vertex festlegen @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Skizze - + Constrain horizontal distance Horizontalen Abstand festlegen - + Fix the horizontal distance between two points or line ends Den horizontalen Abstand zwischen zwei Punkten oder Streckenenden festlegen @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Skizze - + Constrain vertical distance Vertikalen Abstand festlegen - + Fix the vertical distance between two points or line ends Den vertikalen Abstand zwischen zwei Punkten oder Streckenenden festlegen @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Skizze - + Constrain equal Gleichheit festlegen - + Create an equality constraint between two lines or between circles and arcs Eine Gleichheitsbeschränkung zwischen zwei Linien oder zwischen Kreisen und Bögen festlegen @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Skizze - + Constrain horizontally Horizontal einschränken - + Create a horizontal constraint on the selected item Eine horizontale Beschränkung für das gewählte Element setzen @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skizze - + Constrain InternalAlignment Interne Ausrichtung einschränken - + Constrains an element to be aligned with the internal geometry of another element Schränkt die Ausrichtung eines Elements bezüglich der internen geometrz eines anderen Elements ein @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Skizze - + Constrain lock Sperren - + Create a lock constraint on the selected item Eine Sperrung für das gewählte Element setzen @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Skizze - + Constrain parallel Parallelität erzwingen - + Create a parallel constraint between two lines Parallelität zwischen zwei Geraden erzwingen @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Skizze - + Constrain perpendicular Orthogonalität festlegen - + Create a perpendicular constraint between two lines Eine Orthogonalitätsbeschränkung zwischen zwei Linien erstellen @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skizze - + Constrain point onto object Punkt auf Objekt festlegen - + Fix a point onto an object Punkt auf ein Objekt festlegen @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Skizze - + Constrain radius Radius festlegen - + Fix the radius of a circle or an arc Lege Radius eines Kreises oder Bogens fest @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skizze - + Constrain refraction (Snell's law') Beschränkung: Lichtbrechung (Snellius-Gesetz) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Erstellen Sie eine Lichtbrechung (Snellius-Gesetz) als Einschränkung zwischen zwei Endpunkten der Strahlen und einer Kante als Schnittstelle. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Skizze - + Constrain symmetrical Symmetrie festlegen - + Create a symmetry constraint between two points with respect to a line or a third point Eine Symmetriebeschränkung zwischen zwei Punkten in Bezug auf eine Linie oder einen dritten Punkt erstellen @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Skizze - + Constrain tangent Tangente setzen - + Create a tangent constraint between two entities Tangente zwischen zwei Elementen erzwingen @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Skizze - + Constrain vertically Vertikal einschränken - + Create a vertical constraint on the selected item Eine vertikale Beschränkung für das gewählte Element setzen @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Skizze - + Create arc by three points Bogen aus drei Punkten erstellen - + Create an arc by its end points and a point along the arc Erstelle einen Bogen mit Endpunkten und einem Punkt auf Bogen @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Skizze - + Create circle by three points Kreis aus drei Punkten erstellen - + Create a circle by 3 perimeter points Kreis erstellen aus drei Punkten auf dem Kreisbogen @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Skizze - + Create arc by center Bogen aus Mittelpunkt erstellen - + Create an arc by its center and by its end points Erstelle einen Bogen aus Mittel- und Endpunkten @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Skizze - + Create an arc of ellipse Erstellen eines Ellipsen-Bogens - + Create an arc of ellipse in the sketch Erstellen eines Ellipsen-Bogens in der Skizze @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Skizze - + Create an arc of hyperbola Bogen einer Hyperbel erstellen - + Create an arc of hyperbola in the sketch Bogen einer Hyperbel in der Skizze erstellen @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Skizze - + Create an arc of parabola Erstellen von Bogen der Parabel - + Create an arc of parabola in the sketch Erstellen von Bogen der Parabel in der Skizze @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Skizze - + Create B-spline B-Spline erstellen - + Create a B-spline via control points in the sketch. Erstellen eines B-Splines über Kontrollpunkte in der Skizze. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Skizze - + Create circle Kreis erstellen - + Create a circle in the sketch Kreis in der Skizze erstellen @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Skizze - + Create draft line Entwurfslinie erstellen - + Create a draft line in the sketch Eine Entwurfslinie in der Skizze erstellen @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Skizze - + Create ellipse by 3 points Erstellen einer Ellipse durch 3 Punkte - + Create an ellipse by 3 points in the sketch Erstellen einer Ellipse durch 3 Punkte in der Skizze @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Skizze - + Create ellipse by center Erstellen einer Ellipse durch Angabe des Zentrums - + Create an ellipse by center in the sketch Erstellen einer Ellipse durch Angabe des Zentrums in der Skizze @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Skizze - + Create fillet Abrundung erstellen - + Create a fillet between two lines or at a coincident point Erstellen einer Abrundung zwischen zwei Geraden oder an einem anliegenden Punkt @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Skizze - + Create heptagon Siebeneck erstellen - + Create a heptagon in the sketch Siebeneck in der Skizze erstellen @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Skizze - + Create hexagon Sechseck erstellen - + Create a hexagon in the sketch Sechseck in der Skizze erstellen @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Skizze - + Create line Linie erstellen - + Create a line in the sketch Linie in der Skizze erstellen @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Skizze - + Create octagon Achteck erstellen - + Create an octagon in the sketch Achteck in der Skizze erstellen @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Skizze - + Create pentagon Fünfeck erstellen - + Create a pentagon in the sketch Fünfeck in der Skizze erstellen @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Skizze - + Create periodic B-spline Erstellen von periodischer B-Spline - + Create a periodic B-spline via control points in the sketch. Erstellen periodischer B-Splines über Kontrollpunkte in der Skizze. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Skizze - + Create point Punkt erstellen - + Create a point in the sketch Punkt in der Skizze erstellen @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Skizze - + Create polyline Linienzug erstellen - + Create a polyline in the sketch. 'M' Key cycles behaviour Einen Linienzug in der Skizze erstellen. Taste 'M' wechselt Verhalten durch @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Skizze - + Create rectangle Rechteck erstellen - + Create a rectangle in the sketch Rechteck in der Skizze erstellen @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Skizze - + Create regular polygon Regelmäßiges Polygon erstellen - + Create a regular polygon in the sketch Erstelle ein regelmäßiges Polygon in der Skizze @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Skizze - + Create slot Nut erstellen - + Create a slot in the sketch Nut in der Skizze erstellen @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Skizze - + Create square Quadrat erstellen - + Create a square in the sketch Quadrat in der Skizze erstellen @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Skizze - + Create text Text erstellen - + Create text in the sketch Text in der Skizze erstellen @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Skizze - + Create equilateral triangle Gleichseitiges Dreieck erstellen - + Create an equilateral triangle in the sketch Erstellen Sie ein gleichseitiges Dreieck in der Skizze @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Skizze - + Extend edge Kante verlängern - + Extend an edge with respect to the picked position Verlängern einer Kante in Bezug auf die ausgewählte Position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Skizze - + External geometry Externe Geometrie - + Create an edge linked to an external geometry Erstellen einer Kante verknüpft mit einer externen Geometrie @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Skizze - + Toggle activate/deactivate constraint Aktivierung/Deaktiviere Maskierung - + Toggles activate/deactivate state for selected constraints Aktiviert/deaktiviere Status für ausgewählte Maskierung @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Skizze - + Toggle reference/driving constraint Umschalten auf steuernde Bemaßung - + Toggles the toolbar or selected constraints to/from reference mode Schaltet die Toolbar oder die ausgewählten Beschränkungen in/aus dem Steuer-Modus @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Skizze - + Trim edge Kante zuschneiden - + Trim an edge with respect to the picked position Trimmen einer Kante bezüglich der ausgewählten Position @@ -1952,47 +1952,47 @@ Fehler automatische Beschränkungen: unlösbare Skizze nach dem Anwenden von gleichheits Beschränkungen. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Schnittpunkt von Kurven konnte nicht gefunden werden. Versuchen Sie eine Koinzidenz Beschränkung zwischen den Scheitelpunkten der Kurven hinzuzufügen, die Sie verrunden möchten. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Diese Version von OCE/OCC unterstützt keine Knoten-Operationen. Sie benötigen 6.9.0 oder höher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometrie Index (GeoID) ist außerhalb des gültigen Bereichs. - + You are requesting no change in knot multiplicity. Sie fordern keine Änderung in der Multiplizität der Knoten. - + The Geometry Index (GeoId) provided is not a B-spline curve. Der bereitgestellte Geometrieindex (GeoId) ist keine B-Spline-Kurve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Der Knotenindex ist außerhalb der Grenzen. Beachten Sie, dass der erste Knoten gemäß der OCC-Notation den Index 1 und nicht Null hat. - + The multiplicity cannot be increased beyond the degree of the B-spline. Die Multiplizität kann nicht über den Grad des B-Splines hinaus erhöht werden. - + The multiplicity cannot be decreased beyond zero. Die Multiplizität kann nicht über Null hinaus verringert werden. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC kann die Multiplizität innerhalb der maximalen Toleranz nicht verringern. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,13 +2201,13 @@ Wählen Sie Kante(n) aus der Skizze. - - - - + + + + Dimensional constraint - Dimensionale Beschränkung + Maßliche Beschränkung @@ -2232,273 +2232,273 @@ Eine der Ausgewählten muss auf der Skizze liegen - - + + Select an edge from the sketch. Wählen Sie eine Kante aus der Skizze. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Nicht erfüllbare Bedingung - - - - + + + + The selected edge is not a line segment Die gewählte Kante ist kein Linienabschnitt - - - - - - + + + + + + Double constraint Doppelbedingung - - - - + + + + The selected edge already has a horizontal constraint! Die ausgewählte Kante hat bereits eine horizontale Einschränkung! - - - - + + + + The selected edge already has a vertical constraint! Die ausgewählte Kante hat bereits eine vertikale Einschränkung! - - - - - - + + + + + + The selected edge already has a Block constraint! Die ausgewählte Kante hat bereits eine fixier Einschränkung! - + The selected item(s) can't accept a horizontal constraint! Die ausgewählten Elemente nehmen keine horizontale Nebenbedingung an! - + There are more than one fixed point selected. Select a maximum of one fixed point! Es ist mehr als ein Fixpunkt ausgewählt. Wähle maximal einen Fixpunkt! - + The selected item(s) can't accept a vertical constraint! Die ausgewählten Elemente nehmen keine vertikale Nebenbedingung an! - + There are more than one fixed points selected. Select a maximum of one fixed point! Es ist mehr als ein Fixpunkt ausgewählt. Wähle maximal einen Fixpunkt! - - + + Select vertices from the sketch. Wählen Sie Knoten aus der Skizze aus. - + Select one vertex from the sketch other than the origin. Wählen Sie einen Punkt der Skizze außer den Ursprung. - + Select only vertices from the sketch. The last selected vertex may be the origin. Wählen Sie nur Scheitelpunkte aus der Skizze. Die letzten ausgewählte Scheitelpunkt ist möglicherweise der Ursprung. - + Wrong solver status Falscher Solver Status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Eine Fixierung kann nicht hinzugefügt werden, wenn die Skizze nicht gelöst ist oder redundante und / oder widersprüchliche Einschränkungen vorliegen. - + Select one edge from the sketch. Wähle eine Kante aus der Skizze aus. - + Select only edges from the sketch. Wähle nur Kanten aus der Skizze aus. - - - - - - - + + + + + + + Error Fehlermeldungen - + Select two or more points from the sketch. Wählen Sie aus der Skizze zwei oder mehr Punkte aus. - - + + Select two or more vertexes from the sketch. Wählen Sie zwei oder mehr Scheitelpunkte von der Skizze. - - + + Constraint Substitution Beschränkung Ersetzen - + Endpoint to endpoint tangency was applied instead. Die Endpunkt zu Endpunkt Tangente wurde stattdessen angewendet. - + Select vertexes from the sketch. Wählen Sie Vertexe aus der Skizze aus. - - + + Select exactly one line or one point and one line or two points from the sketch. Wählen Sie genau eine Linie oder einen Punkt und eine Linie oder zwei Punkte aus der Skizze aus. - + Cannot add a length constraint on an axis! Keine Längenbeschränkung einer Achse möglich! - + This constraint does not make sense for non-linear curves Diese Einschränkung ist für nichtlineare Kurven nicht sinnvoll - - - - - - + + + + + + Select the right things from the sketch. Wähle die richtigen Dinge aus der Skizze. - - + + Point on B-spline edge currently unsupported. Punkt auf B-Spline Rand wird derzeit nicht unterstützt. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Keiner der gewählten Punkte wurde beschränkt auf die zugehörigen Kurven. Sie sind entweder Bestandteil des gleichen Elements oder Sie sind beide Externe Geometrie. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Wählen Sie entweder einen Punkt und mehrere Kurven oder eine Kurve und mehrere Punkte. Sie haben %1 Kurven und %2 Punkte ausgewählt. - - - - + + + + Select exactly one line or up to two points from the sketch. Wählen Sie genau eine Linie oder bis zu zwei Punkte aus der Skizze aus. - + Cannot add a horizontal length constraint on an axis! Keine horizontale Längenbeschränkung einer Achse möglich! - + Cannot add a fixed x-coordinate constraint on the origin point! Eine feste x-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! - - + + This constraint only makes sense on a line segment or a pair of points Diese Einschränkung macht nur Sinn auf einem Liniensegment oder einem Paar von Punkten - + Cannot add a vertical length constraint on an axis! Keine vertikale Längenbeschränkung einer Achse möglich! - + Cannot add a fixed y-coordinate constraint on the origin point! Eine feste y-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! - + Select two or more lines from the sketch. Wählen Sie zwei oder mehr Linien aus der Skizze aus. - - + + Select at least two lines from the sketch. Wählen Sie mindestens zwei Linien aus der Skizze aus. - + Select a valid line Wählen Sie eine gültige Linie aus - - + + The selected edge is not a valid line Die gewählte Kante ist keine gültige Linie - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Erlaubte Kombinationen: zwei Kurven; einen Endpunkt und eine Kurve; zwei Endpunkte; zwei Kurven und einen Punkt. - + Select some geometry from the sketch. perpendicular constraint Geometrie aus der Skizze auswählen. - + Wrong number of selected objects! perpendicular constraint Falsche Anzahl von ausgewählten Objekten! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Bei 3 Objekten müssen diese aus 2 Kurven und 1 Punkt bestehen. - - + + Cannot add a perpendicularity constraint at an unconnected point! Eine Rechtwinkligkeitsbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! - - - + + + Perpendicular to B-spline edge currently unsupported. Senkrecht zur B-Spline-Kante wird derzeit nicht unterstützt. - - + + One of the selected edges should be a line. Eine der ausgewählten Kanten sollte eine Gerade sein. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpunkte; Zwei Kurven und ein Punkt. - + Select some geometry from the sketch. tangent constraint Geometrie aus der Skizze auswählen. - + Wrong number of selected objects! tangent constraint Falsche Anzahl von ausgewählten Objekten! - - - + + + Cannot add a tangency constraint at an unconnected point! Eine Tangentialrandbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! - - - + + + Tangency to B-spline edge currently unsupported. Tangentiale zu B-Spline Rand wird derzeit nicht unterstützt. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Die Endpunkt zu Endpunkt Tangente wurde stattdessen angewendet. Die Koinzidenzbedingung wurde gelöscht. - - - - + + + + Select one or more arcs or circles from the sketch. Wählen Sie eine oder mehrere Bögen oder Kreise aus der Skizze. - - + + Constrain equal Gleichheit festlegen - + Do you want to share the same radius for all selected elements? Möchten Sie den gleichen Radius allen ausgewählten Elemente zuweisen? - - + + Constraint only applies to arcs or circles. Einschränkung gilt nur für Bögen oder Kreise. - + Do you want to share the same diameter for all selected elements? Möchten Sie für alle ausgewählten Elemente den gleichen Durchmesser verwenden? - - + + Select one or two lines from the sketch. Or select two edges and a point. Wählen Sie eine oder zwei Linien aus der Skizze. Oder wählen Sie zwei Kanten und einen Punkt. - - + + Parallel lines Parallele Linien - - + + An angle constraint cannot be set for two parallel lines. Eine Winkel-Einschränkung kann für zwei parallele Linien nicht festgelegt werden. - + Cannot add an angle constraint on an axis! Winkelbeschränkung einer Achse nicht möglich! - + Select two edges from the sketch. Wählen Sie zwei Kanten aus der Skizze aus. - - + + Select two or more compatible edges Wählen Sie zwei oder mehr kompatible Kanten - + Sketch axes cannot be used in equality constraints Skizzen-Achsen nicht in Gleichheitbeschränkungen einsetzbar - + Equality for B-spline edge currently unsupported. Gleichheit für B-Spline Rand wird derzeit nicht unterstützt. - - + + Select two or more edges of similar type Wählen Sie mindestens zwei Kanten ähnlichen Typs - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Wählen Sie zwei Punkte und eine Symmetrielinie, zwei Punkte und einen Symmetriepunkt oder eine Linie und einen Symmetriepunkt von der Skizze. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Kann keine Symmetrie zwischen einer Linie und deren Endpunkten definieren! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Wählen Sie zwei Endpunkte von Linien aus, die als Strahlen dienen sollen, und eine Kante, die eine Grenze darstellt. Der erste gewählte Punkt entspricht Index n1, zweitens - zu n2 und der Bezugs-Wert legt das Verhältnis n2/n1 fest. - + Selected objects are not just geometry from one sketch. Ausgewählte Objekte sind nicht nur Geometrie aus einer einzigen Skizze. - + Number of selected objects is not 3 (is %1). Die Anzahl der ausgewählten Objekte ist nicht 3 (ist %1). - + Cannot create constraint with external geometry only!! Kann keine Beschränkung ausschließlich auf Basis einer Externen Geometrie erstellen!! - + Incompatible geometry is selected! Inkompatible Geometrie wurde ausgewählt! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw auf B-Spline Rand wird derzeit nicht unterstützt. - - + + Select at least one ellipse and one edge from the sketch. Wählen Sie mindestens eine Ellipse und eine Kante aus der Skizze. - + Sketch axes cannot be used in internal alignment constraint Skizzen-Achsen können nicht in interner Ausrichtungs-Einschränkung eingesetzt werden - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Sie können nicht intern eine Ellipse auf eine andere Ellipse beschränken. Wählen Sie nur eine Ellipse. - - + + Maximum 2 points are supported. Maximal 2 Punkte werden unterstützt. - - + + Maximum 2 lines are supported. Maximal 2 Punkte werden unterstützt. - - + + Nothing to constrain Nichts zu beschränken - + Currently all internal geometry of the ellipse is already exposed. Alle Innengeometrie der Ellipse ist derzeit bereits benutzt. - - - - + + + + Extra elements Zusätzliche Elemente - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Mehr Elemente als möglich wurden für die angegebene Ellipse zur Verfügung gestellt. Diese wurden ignoriert. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Sie können nicht den Bogen einer Ellipse auf den anderen Bogen der gleichen Ellipse einschränken. Wählen Sie nur einen Bogen einer Ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Sie können nicht eine Ellipse auf einen anderen Bogen der gleichen Ellipse einschränken. Wählen Sie nur eine Ellipse oder einen Bogen einer Ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Die ganze interne Geometrie des elliptischen Bogens ist derzeit bereits freigelegt. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Mehr Elemente als möglich wurden für den angegebenen elliptischen Bogen zur Verfügung gestellt. Diese wurden ignoriert. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Interne Geometrie wird derzeit nur für Ellipsen und elliptische Bögen unterstützt. Das ausgewählte Element muss eine Ellipse oder ein elliptischer Bogen sein. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Wählen Sie die Beschränkung(en) aus der Skizze. - + CAD Kernel Error CAD-Kernel-Fehler @@ -2941,42 +2941,42 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Eine Kopie würde zu einem Zirkelbezug führen. - + This object is in another document. Dieses Objekt ist in einem anderen Dokument. - + This object belongs to another body. Hold Ctrl to allow cross-references. Dieses Objekt gehört zu einem anderen Körper. Strg-Taste drücken und halten um Querverweise zu erlauben. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Dieses Objekt gehört zu einem anderen Körper und enthält externe Geometrie. Querverweis ist nicht erlaubt. - + This object belongs to another part. Dieses Objekt gehört zu einem anderen Teil. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Die ausgewählte Skizze ist nicht parallel zu dieser Skizze. Drücke Sie Strg + Alt um eine nicht parallele Skizze zu erlauben. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Die XY-Achsen der ausgewählten Skizze haben nicht die gleiche Richtung wie die Aktive Skizze. Drücken Sie Strg + Alt um den Fehler zu ignorieren. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Der Ursprung der ausgewählten Skizze ist nicht mit dem Ursprung dieser Skizze ausgerichtet. Halten Sie Strg + Alt, um den Fehler zu ignorieren. @@ -3062,8 +3062,8 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Radius einfügen - - + + Radius: Radius: @@ -3074,8 +3074,8 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Durchmesser einfügen - - + + Diameter: Durchmesser: @@ -3103,24 +3103,24 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Länge: - - + + Change radius Radius ändern - - + + Change diameter Durchmesser ändern - + Refractive index ratio Brechungsindex-Verhältnis - + Ratio n2/n1: Verhältnis n2/n1: @@ -3136,22 +3136,22 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Diese Verknüpfung wird Zirkulare Abhängigkeiten verursachen. - + This object is in another document. Dieses Objekt ist in einem anderen Dokument. - + This object belongs to another body, can't link. Dieses Objekt gehört zu einem anderen Körper, kann nicht verknüft werden. - + This object belongs to another part, can't link. Dieses Objekt gehört zu einem anderen Teil, kann nicht verknüpft werden. @@ -3192,8 +3192,8 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun SketcherGui::PropertyConstraintListItem - - + + Unnamed Unbenannt @@ -3308,7 +3308,7 @@ with respect to the others using construction lines If selected, it substitutes dimensional constraints by geometric constraints in the copies, so that a change in the original element is directly reflected on copies - Wenn diese Option aktiviert ist, werden bei Kopien dimensionale Maskierungen durch geometrische Maskierungen ersetzt. Änderungen am ursprünglichen Element wirken direkt auf die abgeleiteten Kopien + Wenn aktiviert, werden bei den Kopien maßliche Beschränkungen durch geometrische Beschränkungen ersetzt. Dadurch wirken sich Änderungen am ursprünglichen Element direkt auf die abgeleiteten Kopien aus @@ -3649,12 +3649,12 @@ Erfordert das erneute aktivieren des Bearbeitungsmodus. A dialog will pop up to input a value for new dimensional constraints - Ein Dialog öffnet sich, um einen Wert für neue Dimensionsbeschränkungen einzugeben + Ein Dialog wird geöffnet, zur Eingabe eines Wertes für die neu erstellte maßliche Beschränkung Ask for value after creating a dimensional constraint - Nach Wert fragen nachdem eine Abstandsbeschränkung erstellt wurde + Wert erfragen, nach Erstellung einer maßlichen Beschränkung @@ -3908,6 +3908,26 @@ Es wurden keine Beschränkungen zu diesen Punkten gefunden. All constraints that deal with external geometry were deleted. Alle Beschränkungen mit Verknüpfungen zu externer Geometrie wurden gelöscht. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4254,70 +4274,77 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Skizzenprüfung - + Invalid constraints Ungültige Beschränkung - - + + + Fix Reparieren - - + + + Find Suchen - + Delete constraints to external geom. Lösche Beschränkungen zu externen Geometrien - + Missing coincidences Zusammenfallende Punkte - + Tolerance: Toleranz: - + Highlight open vertexes Endpunkte markieren - + Ignore construction geometry Hilfsgeometrie ignorieren + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Verdrehte externe Geometrie - + Swap endpoints in constraints Tausche Endpunkte in Beschränkung - + Constraint orientation locking Fixiert Orientierung von Beschränkung - + Enable/Update Aktivieren/Aktualisieren - + Disable Deaktivieren @@ -4325,104 +4352,104 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges SketcherGui::ViewProviderSketch - + Edit sketch Skizze bearbeiten - + A dialog is already open in the task panel Ein Dialog im Arbeitspanel ist bereits geöffnet - + Do you want to close this dialog? Möchten Sie dieses Dialogfeld schließen? - + Invalid sketch Ungültige Skizze - + Do you want to open the sketch validation tool? Möchten Sie das Werkzeug zum Überprüfen der Skizze öffnen? - + The sketch is invalid and cannot be edited. Die Skizze ist ungültig und kann nicht bearbeitet werden. - + Please remove the following constraint: Bitte folgende Beschränkung entfernen: - + Please remove at least one of the following constraints: Bitte mindestens eine der folgenden Beschränkungen entfernen: - + Please remove the following redundant constraint: Bitte folgende redundante Beschränkung entfernen: - + Please remove the following redundant constraints: Bitte folgende, redundante Beschränkungen entfernen: - + Empty sketch Leere Skizze - + Over-constrained sketch Überbestimmte Skizze - - - + + + (click to select) (anklicken zum Auswählen) - + Sketch contains conflicting constraints Skizze enthält widersprüchliche Einschränkungen - + Sketch contains redundant constraints Skizze enthält redundante Einschränkungen - + Fully constrained sketch Vollständig eingeschränkte Skizze - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Unbeschränkte Skizze mit <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 Freiheitsgrad</span></a> - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Unbeschränkte Skizze mit <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 Freiheitsgraden</span></a> - + Solved in %1 sec Berechnet in %1 s - + Unsolved (%1 sec) Keine Lösung (%1 s) @@ -4511,8 +4538,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Leget den Durchmesser eines Kreises oder Bogens fest @@ -4520,8 +4547,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Lege Radius eines Kreises oder Bogens fest @@ -4538,8 +4565,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Erstelle einen Bogen mit Endpunkten und einem Punkt auf Bogen @@ -4547,8 +4574,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Erstelle einen Kreis aus drei Punkten auf dem Kreisbogen @@ -4556,8 +4583,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateArc - - + + Create an arc by its center and by its end points Erstelle einen Bogen aus Mittel- und Endpunkten @@ -4565,8 +4592,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Elliptischen Bogen aus Mittelpunkt, großer Halbachse und Endpunkten erzeugen @@ -4574,8 +4601,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Erstellen Sie einen Hyperbel Bogen durch seine Mitte, großer Radius, Endpunkte @@ -4583,8 +4610,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Erstellen Sie einen Parabel Bogen durch seinen Fokus, Scheitelpunkt, Endpunkte @@ -4592,13 +4619,13 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateBSpline - + B-spline by control points B-Spline Kontrollpunkte - - + + Create a B-spline by control points B-Spline erzeugen - offene Form @@ -4606,8 +4633,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Erstelle einen Kreis aus Mittel- und einem Randpunkt @@ -4615,8 +4642,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Ellipse aus Periapsis, Apoapsis und kleiner Halbachse erzeugen @@ -4624,8 +4651,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Ellipse aus Mittelpunkt, großer Halbachse und weiterem Punkt erzeugen @@ -4633,8 +4660,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Siebeneck aus Mittelpunkt und einer Ecke erzeugen @@ -4642,8 +4669,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Sechseck aus Mittelpunkt und einer Ecke erzeugen @@ -4651,14 +4678,14 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Achteck aus Mittelpunkt und einer Ecke erzeugen - - + + Create a regular polygon by its center and by one corner Regelmäßiges Polygon aus Mittelpunkt und einer Ecke erzeugen @@ -4666,8 +4693,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Fünfeck aus Mittelpunkt und einer Ecke erzeugen @@ -4675,8 +4702,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateSquare - - + + Create a square by its center and by one corner Quadrat aus Mittelpunkt und einer Ecke erzeugen @@ -4684,8 +4711,8 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Gleichseitiges Dreieck aus Mittelpunkt und einer Ecke erzeugen @@ -4693,13 +4720,13 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-Spline erzeugen - geschlossenen Form - - + + Create a periodic B-spline by control points B-Spline erzeugen - geschlossene Form @@ -4836,7 +4863,7 @@ Soll die Skizze von der Fläche entfernt werden? Executes a recomputation of active document after every sketch action - Führt eine Neuberechnung des aktiven Dokuments nach jeder Zeichnung aus + Führt eine Neuberechnung des aktiven Dokuments nach jeder Skizzier-Aktion durch @@ -4851,7 +4878,7 @@ Soll die Skizze von der Fläche entfernt werden? Update - Update + Aktualisieren diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm index 0e607b55d2..e31b58bc4e 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts index 2a42cfefa2..c41036a29f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Πιστό Αντίγραφο - + Copies the geometry of another sketch Αντιγράφει τα γεωμετρικά στοιχεία ενός άλλου σκαριφήματος @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Περιορισμός τόξου ή κύκλου - + Constrain an arc or a circle Περιόρισε ένα τόξο ή έναν κύκλο - + Constrain radius Περιορισμός ακτίνας - + Constrain diameter Περιορισμός διαμέτρου @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Δημιουργία ενός τόξου στον πάγκο εργασίας σκαριφημάτων - + Center and end points Κέντρο, αρχικό σημείο και τελικό σημείο - + End points and rim point Αρχικό σημείο, τελικό σημείο καθώς και σημείο της περιφέρειας @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Δημιουργία μιας καμπύλης B-spline - + Create a B-spline in the sketch Δημιουργία μιας καμπύλης B-spline στο σκαρίφημα @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Δημιουργία κύκλου - + Create a circle in the sketcher Δημιουργία ενός κύκλου στον πάγκο εργασίας σκαριφημάτων - + Center and rim point Κέντρο και σημείο της περιφέρειας - + 3 rim points 3 σημεία της περιφέρειας @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Δημιουργία μιας κωνικής τομής - + Create a conic in the sketch Δημιουργία μιας κωνικής τομής στο σκαρίφημα - + Ellipse by center, major radius, point Χάραξη έλλειψης με χρήση κέντρου, μεγάλου ημιάξονα, σημείου - + Ellipse by Periapsis, apoapsis, minor radius Χάραξη έλλειψης με χρήση Περίκεντρου, απόκεντρου, μικρού ημιάξονα - + Arc of ellipse by center, major radius, endpoints Χάραξη τόξου έλλειψης με χρήση κέντρου, μεγάλου ημιάξονα, αρχικού και τελικού σημείου - + Arc of hyperbola by center, major radius, endpoints Χάραξη τόξου υπερβολής με χρήση κέντρου, μείζονος άξονα, αρχικού και τελικού σημείου - + Arc of parabola by focus, vertex, endpoints Χάραξη τόξου παραβολής με χρήση εστίας, κορυφής, αρχικού και τελικού σημείου @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Δημιουργία κανονικού πολυγώνου - + Create a regular polygon in the sketcher Δημιουργία ενός κανονικού πολυγώνου στον πάγκο εργασίας σκαριφημάτων - + Triangle Τρίγωνο - + Square Τετράγωνο - + Pentagon Πεντάγωνο - + Hexagon Εξάγωνο - + Heptagon Επτάγωνο - + Octagon Οκτάγωνο - + Regular Polygon Κανονικό Πολύγωνο @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Περιορισμός γωνίας - + Fix the angle of a line or the angle between two lines Καθορισμός της γωνίας μιας γραμμής ή της γωνίας μεταξύ δύο γραμμών @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Περιορισμός Κλειδώματος - + Create a Block constraint on the selected item Δημιουργία ενός περιορισμού κλειδώματος στο επιλεγμένο αντικείμενο @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Περιορισμός ταύτισης - + Create a coincident constraint on the selected item Δημιουργία ενός περιορισμού ταύτισης στο επιλεγμένο αντικείμενο @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Περιορισμός διαμέτρου - + Fix the diameter of a circle or an arc Όρισε τη σταθερή διάμετρο ενός κύκλου, ή ενός τόξου @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Περιορισμός απόστασης - + Fix a length of a line or the distance between a line and a vertex Καθορισμός του μήκους μιας γραμμής ή της απόστασης μεταξύ μιας γραμμής και μιας κορυφής @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Καθορισμός της οριζόντιας απόστασης μεταξύ δύο σημείων ή μεταξύ τελικών σημείων γραμμών @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Καθορισμός της κατακόρυφης απόστασης μεταξύ δύο σημείων ή μεταξύ τελικών σημείων γραμμών @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Περιορισμός ισότητας - + Create an equality constraint between two lines or between circles and arcs Δημιουργία ενός περιορισμού ισότητας μεταξύ δύο γραμμών ή μεταξύ κύκλων και τόξων @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Περιορισμός κατά την οριζόντια διεύθυνση - + Create a horizontal constraint on the selected item Δημιουργία ενός οριζόντιου περιορισμού για το επιλεγμένο αντικείμενο @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Περιορισμός Εσωτερικής Στοίχισης - + Constrains an element to be aligned with the internal geometry of another element Δημιουργεί έναν περιορισμό στοίχισης ενός στοιχείου με βάση την εσωτερική γεωμετρία ενός άλλου στοιχείου @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Περιορισμός κλειδώματος - + Create a lock constraint on the selected item Δημιουργία ενός περιορισμού κλειδώματος στο επιλεγμένο αντικείμενο @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Περιορισμός παραλληλίας - + Create a parallel constraint between two lines Δημιουργήστε έναν περιορισμό παραλληλίας μεταξύ δύο γραμμών @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Περιορισμός καθετότητας - + Create a perpendicular constraint between two lines Δημιουργία ενός περιορισμού καθετότητας μεταξύ δύο γραμμών @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Περιορισμός θέσης σημείου σε αντικείμενο - + Fix a point onto an object Καθορισμός της θέσης ενός σημείου σε ένα αντικείμενο @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Περιορισμός ακτίνας - + Fix the radius of a circle or an arc Καθορισμός της ακτίνας ενός κύκλου ή ενός τόξου @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Περιορισμός διάθλασης (Νόμος του Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Δημιουργία ενός περιορισμού του νόμου διάθλασης (Νόμος του Snell) μεταξύ αρχικών και τελικών σημείων ακτίνων και μιας ακμής ως διεπαφής. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Περιορισμός συμμετρίας - + Create a symmetry constraint between two points with respect to a line or a third point Δημιουργία ενός περιορισμού συμμετρίας μεταξύ δύο σημείων ως προς μια γραμμή ή ένα τρίτο σημείο @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Περιορισμός εφαπτομένης - + Create a tangent constraint between two entities Δημιουργία ενός περιορισμού επαφής μεταξύ δύο οντοτήτων @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Περιορισμός κατά την κατακόρυφη διεύθυνση - + Create a vertical constraint on the selected item Δημιουργία ενός κατακόρυφου περιορισμού στο επιλεγμένο αντικείμενο @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Δημιουργία τόξου από τρία σημεία - + Create an arc by its end points and a point along the arc Δημιουργία ενός τόξου με χρήση του αρχικού και του τελικού του σημείου καθώς και ενός σημείου κατά μήκος του τόξου @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Δημιουργία κύκλου από τρία σημεία - + Create a circle by 3 perimeter points Δημιουργία ενός κύκλου από τρία σημεία της περιμέτρου @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Δημιουργία τόξου από κέντρο - + Create an arc by its center and by its end points Δημιουργία ενός τόξου με χρήση του κέντρου, του αρχικού και του τελικού του σημείου @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Δημιουργία ενός τόξου έλλειψης - + Create an arc of ellipse in the sketch Δημιουργία ενός τόξου έλλειψης στο σκαρίφημα @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Δημιουργία ενός τόξου υπερβολής - + Create an arc of hyperbola in the sketch Δημιουργία ενός τόξου υπερβολής στο σκαρίφημα @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Δημιουργία ενός τόξου παραβολής - + Create an arc of parabola in the sketch Δημιουργία ενός τόξου παραβολής στο σκαρίφημα @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Δημιουργία καμπύλης B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Δημιουργία κύκλου - + Create a circle in the sketch Δημιουργία ενός κύκλου στο σκαρίφημα @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Δημιουργία γραμμής προσχεδίου - + Create a draft line in the sketch Δημιουργία μιας γραμμής προσχεδίου στο σκαρίφημα @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Δημιουργία έλλειψης από 3 σημεία - + Create an ellipse by 3 points in the sketch Δημιουργία μιας έλλειψης από 3 σημεία στο σκαρίφημα @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Δημιουργία έλλειψης από κέντρο - + Create an ellipse by center in the sketch Δημιουργία μιας έλλειψης από κέντρο στο σκαρίφημα @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Δημιουργία στρογγυλέματος - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Δημιουργία επταγώνου - + Create a heptagon in the sketch Δημιουργία ενός επταγώνου στο σκαρίφημα @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Δημιουργία εξαγώνου - + Create a hexagon in the sketch Δημιουργία ενός εξαγώνου στο σκαρίφημα @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Δημιουργία γραμμής - + Create a line in the sketch Δημιουργία μιας γραμμής στο σκαρίφημα @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Δημιουργία οκταγώνου - + Create an octagon in the sketch Δημιουργία ενός οκταγώνου στο σκαρίφημα @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Δημιουργία πενταγώνου - + Create a pentagon in the sketch Δημιουργία ενός πενταγώνου στο σκαρίφημα @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Δημιουργία μιας περιοδικής καμπύλης B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Δημιουργία σημείου - + Create a point in the sketch Δημιουργία ενός σημείου στο σκαρίφημα @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Δημιουργία πολυγραμμής - + Create a polyline in the sketch. 'M' Key cycles behaviour Δημιουργία μιας πολυγραμμής στο σκαρίφημα. Το πλήκτρο 'Μ' πραγματοποιεί κυκλική εναλλαγή λειτουργίας @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Δημιουργία ορθογωνίου - + Create a rectangle in the sketch Δημιουργία ενός ορθογωνίου στο σκαρίφημα @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Δημιουργία κανονικού πολυγώνου - + Create a regular polygon in the sketch Δημιουργία ενός κανονικού πολυγώνου στο σκαρίφημα @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Δημιουργία εσοχής - + Create a slot in the sketch Δημιουργία μιας εσοχής στο σκαρίφημα @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Δημιουργία τετραγώνου - + Create a square in the sketch Δημιουργία ενός τετραγώνου στο σκαρίφημα @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Δημιουργία κειμένου - + Create text in the sketch Δημιουργία κειμένου στο σκαρίφημα @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Δημιουργία ισόπλευρου τριγώνου - + Create an equilateral triangle in the sketch Δημιουργία ενός ισόπλευρου τριγώνου στο σκαρίφημα @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Επέκταση ακμής - + Extend an edge with respect to the picked position Επέκταση μιας ακμής ως προς την επιλεγμένη θέση @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Εξωτερική γεωμετρία - + Create an edge linked to an external geometry Δημιουργία μιας ακμής που συνδέεται με ένα στοιχείο εξωτερικής γεωμετρίας @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Εναλλαγή περιορισμού αναφοράς/ενεργού περιορισμού - + Toggles the toolbar or selected constraints to/from reference mode Εναλλάσσει την γραμμή εργαλείων ή τους επιλεγμένους περιορισμούς στην/από την λειτουργία αναφοράς @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Περικοπή ακμής - + Trim an edge with respect to the picked position Περικοπή μιας ακμής ως προς την επιλεγμένη θέση @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Αυτή η έκδοση του OCE/OCC δεν υποστηρίζει την λειτουργία κόμβων. Θα χρειαστείτε την έκδοση 6.9.0 ή κάποια μεταγενέστερη. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Δεν απαιτείτε καμία αλλαγή της πολλαπλότητας κόμβου. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Ο δείκτης κόμβου είναι εκτός ορίων. Σημειώστε πως σύμφωνα με το σύστημα σημειογραφίας του OCC, ο πρώτος κόμβος έχει δείκτη 1 και όχι μηδέν. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Η πολλαπλότητα δεν δύναται να είναι χαμηλότερη από το μηδέν. - + OCC is unable to decrease the multiplicity within the maximum tolerance. To ΟCC αδυνατεί να μειώσει την πολλαπλότητα εντός των ορίων μέγιστης ανοχής. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Επιλέξτε ακμή(ες) από το σκαρίφημα. - - - - + + + + Dimensional constraint Περιορισμός διαστάσεων @@ -2232,273 +2232,273 @@ Ένα από τα επιλεγμένα θα πρέπει να βρίσκεται στο σκαρίφημα - - + + Select an edge from the sketch. Επιλέξτε μια ακμή από το σκαρίφημα. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Αδύνατος περιορισμός - - - - + + + + The selected edge is not a line segment Η επιλεγμένη ακμή δεν είναι ευθύγραμμο τμήμα - - - - - - + + + + + + Double constraint Διπλός περιορισμός - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Το επιλεγμένο αντικείμενο(α) δεν μπορεί να δεχτεί οριζόντιο περιορισμό! - + There are more than one fixed point selected. Select a maximum of one fixed point! Υπάρχουν περισσότερα από ένα σταθερά σημεία. Επιλέξτε το πολύ ένα σταθερό σημείο! - + The selected item(s) can't accept a vertical constraint! Το επιλεγμένα αντικείμενο(α) δεν μπορεί να δεχτεί κατακόρυφο περιορισμό! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Επιλέξτε κορυφές από το σκαρίφημα. - + Select one vertex from the sketch other than the origin. Επιλέξτε μια κορυφή από το σκαρίφημα εκτός από το σημείο τομής των αξόνων. - + Select only vertices from the sketch. The last selected vertex may be the origin. Επιλέξτε μόνο κορυφές από το σκαρίφημα. Η τελευταία επιλεγμένη κορυφή δύναται να είναι το σημείο τομής των αξόνων. - + Wrong solver status Λάθος κατάσταση επιλυτή - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Επιλέξτε μια ακμή από το σκαρίφημα. - + Select only edges from the sketch. Επιλέξτε μόνο ακμές από το σκαρίφημα. - - - - - - - + + + + + + + Error Σφάλμα - + Select two or more points from the sketch. Επιλέξτε δύο ή περισσότερα σημεία από το σκαρίφημα. - - + + Select two or more vertexes from the sketch. Επιλέξτε δύο ή περισσότερες κορυφές από το σκαρίφημα. - - + + Constraint Substitution Αντικατάσταση Περιορισμού - + Endpoint to endpoint tangency was applied instead. Εφαρμόστηκε περιορισμός επαφής μεταξύ άκρων εναλλακτικά. - + Select vertexes from the sketch. Επιλέξτε κορυφές από το σκαρίφημα. - - + + Select exactly one line or one point and one line or two points from the sketch. Επιλέξτε ακριβώς μια γραμμή ή ένα σημείο και μια γραμμή ή δύο σημεία από το σκαρίφημα. - + Cannot add a length constraint on an axis! Αδύνατη η προσθήκη περιορισμού μήκους σε άξονα! - + This constraint does not make sense for non-linear curves Αυτός ο περιορισμός δεν έχει νόημα για μη γραμμικές καμπύλες - - - - - - + + + + + + Select the right things from the sketch. Επιλέξτε τα κατάλληλα στοιχεία από το σκαρίφημα. - - + + Point on B-spline edge currently unsupported. Δεν υποστηρίζονται σημεία σε ακμές καμπύλης B-spline επί του παρόντος. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Κανένα από τα επιλεγμένα σημεία δεν ήταν περιορισμένο πάνω στις αντίστοιχες καμπύλες, είτε επειδή είναι τμήματα του ίδιου στοιχείου, είτε επειδή ανήκουν και τα δύο στο ίδιο στοιχείο εξωτερικής γεωμετρίας. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Επιλέξτε είτε ένα σημείο και διάφορες καμπύλες, είτε μια καμπύλη και διάφορα σημεία. Έχετε επιλέξει %1 καμπύλες και %2 σημεία. - - - - + + + + Select exactly one line or up to two points from the sketch. Επιλέξτε ακριβώς μια γραμμή ή έως και δύο σημεία από το σκαρίφημα. - + Cannot add a horizontal length constraint on an axis! Αδύνατη η προσθήκη περιορισμού οριζόντιου μήκους σε άξονα! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Αυτός ο περιορισμός έχει νόημα μόνο για ένα ευθύγραμμο τμήμα ή ζεύγος σημείων - + Cannot add a vertical length constraint on an axis! Αδύνατη η προσθήκη κατακόρυφου μήκους σε άξονα! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Επιλέξτε δύο ή περισσότερες γραμμές από το σκαρίφημα. - - + + Select at least two lines from the sketch. Επιλέξτε τουλάχιστον δύο γραμμές από το σκαρίφημα. - + Select a valid line Επιλέξτε μια έγκυρη γραμμή - - + + The selected edge is not a valid line Η επιλεγμένη ακμή δεν είναι έγκυρη γραμμή - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Αποδεκτοί συνδυασμοί: δύο καμπύλες· ένα αρχικό σημείο και μια καμπύλη· ένα αρχικό και ένα τελικό σημείο· δύο καμπύλες και ένα σημείο. - + Select some geometry from the sketch. perpendicular constraint Επιλέξτε γεωμετρικά στοιχεία από το σκαρίφημα. - + Wrong number of selected objects! perpendicular constraint Λάθος αριθμός επιλεγμένων αντικειμένων! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Με 3 αντικείμενα, πρέπει να υπάρχουν 2 καμπύλες και 1 σημείο. - - + + Cannot add a perpendicularity constraint at an unconnected point! Αδύνατη η προσθήκη περιορισμού καθετότητας σε ένα ασύνδετο σημείο! - - - + + + Perpendicular to B-spline edge currently unsupported. Δεν υποστηρίζονται περιορισμοί καθετότητας σε ακμές καμπύλης B-spline επί του παρόντος. - - + + One of the selected edges should be a line. Μια από τις επιλεγμένες ακμές θα πρέπει να είναι γραμμή. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Αποδεκτοί συνδυασμοί: δύο καμπύλες· ένα αρχικό σημείο και μια καμπύλη· ένα αρχικό και ένα τελικό σημείο· δύο καμπύλες και ένα σημείο. - + Select some geometry from the sketch. tangent constraint Επιλέξτε γεωμετρικά στοιχεία από το σκαρίφημα. - + Wrong number of selected objects! tangent constraint Λάθος αριθμός επιλεγμένων αντικειμένων! - - - + + + Cannot add a tangency constraint at an unconnected point! Αδύνατη η προσθήκη περιορισμού επαφής σε ένα ασύνδετο σημείο! - - - + + + Tangency to B-spline edge currently unsupported. Δεν υποστηρίζονται περιορισμοί επαφής σε ακμές καμπύλης B-spline επί του παρόντος. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Εφαρμόστηκε περιορισμός επαφής μεταξύ άκρων. Ο περιορισμός ταύτισης διαγράφηκε. - - - - + + + + Select one or more arcs or circles from the sketch. Επιλέξτε ένα ή περισσότερα τόξα ή κύκλους από το σκαρίφημα. - - + + Constrain equal Περιορισμός ισότητας - + Do you want to share the same radius for all selected elements? Θέλετε να χρησιμοποιήσετε την ίδια ακτίνα για όλα τα επιλεγμένα στοιχεία; - - + + Constraint only applies to arcs or circles. Ο περιορισμός εφαρμόζεται μόνο σε τόξα ή κύκλους. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Επιλέξτε μια ή δύο γραμμές από το σκαρίφημα. Ή επιλέξτε δύο ακμές και ένα σημείο. - - + + Parallel lines Παράλληλες γραμμές - - + + An angle constraint cannot be set for two parallel lines. Δεν δύναται να οριστεί γωνιακός περιορισμός για δύο παράλληλες γραμμές. - + Cannot add an angle constraint on an axis! Αδύνατη η προσθήκη γωνιακού περιορισμού σε άξονα! - + Select two edges from the sketch. Επιλέξτε δύο ακμές από το σκαρίφημα. - - + + Select two or more compatible edges Επιλέξτε δύο ή περισσότερες συμβατές ακμές - + Sketch axes cannot be used in equality constraints Οι άξονες σκαριφήματος δεν μπορούν να χρησιμοποιηθούν στους περιορισμούς ισότητας - + Equality for B-spline edge currently unsupported. Δεν υποστηρίζονται περιορισμοί ισότητας σε ακμές καμπύλης B-spline επί του παρόντος. - - + + Select two or more edges of similar type Επιλέξτε δύο ή περισσότερες ακμές παρόμοιου τύπου - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Επιλέξτε δύο σημεία και μια γραμμή συμμετρίας, δύο σημεία και ένα σημείο συμμετρίας ή μια γραμμή και ένα σημείο συμμετρίας από το σκαρίφημα. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Αδύνατη η προσθήκη περιορισμού μεταξύ μιας γραμμής και του αρχικού ή του τελικού της σημείου! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Επιλέξτε τα δύο άκρα των γραμμών που θα αναπαραστήσουν ακτίνες, καθώς και μια ακμή ως όριο. Το πρώτο επιλεγμένο σημείο αντιστοιχεί στον δείκτη n1, το δεύτερο στον δείκτη n2, και η τιμή του περιορισμού μεγέθους καθορίζει τον λόγο n2/n1. - + Selected objects are not just geometry from one sketch. Τα επιλεγμένα στοιχεία δεν είναι μόνο γεωμετρικά στοιχεία από το ίδιο σκαρίφημα. - + Number of selected objects is not 3 (is %1). Ο αριθμός των επιλεγμένων αντικειμένων δεν είναι 3 (είναι %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Έχει επιλεχθεί μη συμβατό γεωμετρικό στοιχείο! - + SnellsLaw on B-spline edge currently unsupported. Δεν υποστηρίζονται περιορισμοί του νόμου του Snell σε ακμές καμπύλης B-spline επί του παρόντος. - - + + Select at least one ellipse and one edge from the sketch. Επιλέξτε τουλάχιστον μια έλλειψη και μια ακμή από το σκαρίφημα. - + Sketch axes cannot be used in internal alignment constraint Οι άξονες του σκαριφήματος δεν μπορούν να χρησιμοποιηθούν στον περιορισμό εσωτερικής στοίχισης - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Υποστηρίζονται το πολύ 2 σημεία. - - + + Maximum 2 lines are supported. Υποστηρίζονται το πολύ 2 γραμμές. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Επί του παρόντος ολόκληρη η εσωτερική γεωμετρία της έλλειψης είναι ήδη εκτεθειμένη. - - - - + + + + Extra elements Επιπλέον στοιχεία - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Δόθηκαν περισσότερα στοιχεία από όσα είναι εφικτό να ληφθούν υπόψη για την δεδομένη έλλειψη. Τα περιττά στοιχεία αγνοήθηκαν. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Επί του παρόντος ολόκληρη η εσωτερική γεωμετρία του τόξου έλλειψης είναι ήδη εκτεθειμένη. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Δόθηκαν περισσότερα στοιχεία από όσα είναι εφικτό να ληφθούν υπόψη για το δεδομένο τόξο έλλειψης. Τα περιττά στοιχεία αγνοήθηκαν. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Επί του παρόντος η εσωτερική γεωμετρία υποστηρίζεται μόνο για έλλειψη ή τόξο έλλειψης. Το τελευταίο επιλεγμένο στοιχείο θα πρέπει να είναι μια έλλειψη ή ένα τόξο έλλειψης. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Επιλέξτε περιορισμό(ή περιορισμούς) από το σκαρίφημα. - + CAD Kernel Error Σφάλμα Πυρήνα CAD @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Η δημιουργία πιστού αντιγράφου θα προκαλέσει κυκλική εξάρτηση. - + This object is in another document. Αυτό το αντικείμενο βρίσκεται σε κάποιο άλλο έγγραφο. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Αυτό το αντικείμενο ανήκει σε κάποιο άλλο εξάρτημα. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Οι άξονες XY του επιλεγμένου σκαριφήματος έχουν διαφορετικές διευθύνσεις από τους άξονες αυτού του σκαριφήματος. Κρατήστε πιεσμένα τα πλήκτρα Ctrl+Alt για να γίνει παράβλεψη. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Το σημείο τομής των αξόνων του επιλεγμένου σκαριφήματος δεν ταυτίζεται με το σημείο τομής των αξόνων αυτού του σκαριφήματος. Κρατήστε πιεσμένα τα πλήκτρα Ctrl+Alt για να γίνει παράβλεψη. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Εισαγωγή ακτίνας - - + + Radius: Ακτίνα: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Εισαγωγή διαμέτρου - - + + Diameter: Διάμετρος: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Μήκος: - - + + Change radius Αλλαγή ακτίνας - - + + Change diameter Αλλαγή της διαμέτρου - + Refractive index ratio Δείκτης διάθλασης - + Ratio n2/n1: Λόγος n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Η δημιουργία συνδέσμου θα προκαλέσει κυκλική εξάρτηση. - + This object is in another document. Αυτό το αντικείμενο βρίσκεται σε κάποιο άλλο έγγραφο. - + This object belongs to another body, can't link. Αυτό το αντικείμενο ανήκει σε κάποιο άλλο σώμα, αδύνατη η σύνδεση. - + This object belongs to another part, can't link. Αυτό το αντικείμενο ανήκει σε κάποιο άλλο εξάρτημα, αδύνατη η σύνδεση. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Ανώνυμο @@ -3910,6 +3910,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Όλοι οι περιορισμοί που σχετίζονται με την εξωτερική γεωμετρία διαγράφηκαν. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4256,70 +4276,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Επικύρωση πάγκου εργασίας σκαριφημάτων - + Invalid constraints Μη έγκυροι περιορισμοί - - + + + Fix Καθορισμός - - + + + Find Εύρεση - + Delete constraints to external geom. Διαγραφή περιορισμών των στοιχείων εξωτερικής γεωμετρίας. - + Missing coincidences Βρέθηκαν περιπτώσεις αστοχίας σύμπτωσης σημείων - + Tolerance: Ανοχή: - + Highlight open vertexes Επισήμανση ανοικτών κορυφών - + Ignore construction geometry Να αγνοηθεί η κατασκευαστική γεωμετρία + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Ανεστραμμένη εξωτερική γεωμετρία - + Swap endpoints in constraints Ανταλλαγή άκρων στους περιορισμούς - + Constraint orientation locking Περιορισμός κλειδώματος προσανατολισμού - + Enable/Update Ενεργοποίηση/Ενημέρωση - + Disable Απενεργοποίηση @@ -4327,104 +4354,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Επεξεργασία σκίτσου - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Μη έγκυρο σκαρίφημα - + Do you want to open the sketch validation tool? Θέλετε να ανοίξετε το εργαλείο επικύρωσης σκαριφημάτων; - + The sketch is invalid and cannot be edited. Το σκαρίφημα είναι μη έγκυρο και δεν δύναται να υποστεί επεξεργασία. - + Please remove the following constraint: Παρακαλώ αφαιρέστε τον παρακάτω περιορισμό: - + Please remove at least one of the following constraints: Παρακαλώ αφαιρέστε τουλάχιστον έναν από τους παρακάτω περιορισμούς: - + Please remove the following redundant constraint: Παρακαλώ αφαιρέστε τον παρακάτω πλεονάζων περιορισμό: - + Please remove the following redundant constraints: Παρακαλώ αφαιρέστε τους παρακάτω πλεονάζοντες περιορισμούς: - + Empty sketch Κενό σκαρίφημα - + Over-constrained sketch Υπερπεριορισμένο σκαρίφημα - - - + + + (click to select) (κάντε κλικ για να επιλέξετε) - + Sketch contains conflicting constraints Το σκαρίφημα περιέχει αντιφατικούς περιορισμούς - + Sketch contains redundant constraints Το σκαρίφημα περιέχει πλεονάζοντες περιορισμούς - + Fully constrained sketch Πλήρως περιορισμένο σκαρίφημα - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Επιλύθηκε σε %1 δευτερόλεπτα - + Unsolved (%1 sec) Δεν επιλύθηκε (%1 δευτερόλεπτα) @@ -4513,8 +4540,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Όρισε τη σταθερή διάμετρο ενός κύκλου, ή ενός τόξου @@ -4522,8 +4549,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Καθορισμός της ακτίνας ενός κύκλου ή ενός τόξου @@ -4540,8 +4567,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Δημιουργία ενός τόξου με χρήση του αρχικού και του τελικού του σημείου καθώς και ενός σημείου κατά μήκος του τόξου @@ -4549,8 +4576,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Δημιουργία ενός κύκλου από 3 σημεία της περιφέρειας @@ -4558,8 +4585,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Δημιουργία ενός τόξου με χρήση του κέντρου, του αρχικού και του τελικού του σημείου @@ -4567,8 +4594,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Δημιουργία ενός τόξου έλλειψης με χρήση του κέντρου της έλλειψης, του μεγάλου ημιάξονά της, καθώς και του αρχικού και του τελικού σημείου του τόξου @@ -4576,8 +4603,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Δημιουργία ενός τόξου υπερβολής με χρήση του κέντρου της υπερβολής, του μείζονος άξονά της, καθώς και του αρχικού και του τελικού σημείου του τόξου @@ -4585,8 +4612,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Δημιουργία ενός τόξου παραβολής με χρήση της εστίας της παραβολής, της κορυφής της παραβολής, καθώς και του αρχικού και του τελικού σημείου του τόξου @@ -4594,13 +4621,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points Καμπύλη B-spline από σημεία ελέγχου - - + + Create a B-spline by control points Δημιουργία μιας καμπύλης B-spline με χρήση σημείων ελέγχου @@ -4608,8 +4635,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Δημιουργία ενός κύκλου με χρήση του κέντρου του και ενός σημείου της περιφέρειας @@ -4617,8 +4644,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Δημιουργία μιας έλλειψης με χρήση του περίκεντρου, του απόκεντρου και του μικρού ημιάξονα @@ -4626,8 +4653,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Δημιουργία μιας έλλειψης με χρήση του κέντρου της, του μεγάλου ημιάξονα και ενός σημείου @@ -4635,8 +4662,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Δημιουργία ενός επταγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4644,8 +4671,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Δημιουργία ενός εξαγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4653,14 +4680,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Δημιουργία ενός οκταγώνου με χρήση του κέντρου του και μιας γωνίας - - + + Create a regular polygon by its center and by one corner Δημιουργία ενός κανονικού πολυγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4668,8 +4695,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Δημιουργία ενός πενταγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4677,8 +4704,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Δημιουργία ενός τετραγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4686,8 +4713,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Δημιουργία ενός ισόπλευρου τριγώνου με χρήση του κέντρου του και μιας γωνίας @@ -4695,13 +4722,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Περιοδική καμπύλη B-spline από σημεία ελέγχου - - + + Create a periodic B-spline by control points Δημιουργία μιας περιοδικής καμπύλης B-spline με χρήση σημείων ελέγχου diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index 8d3978892e..58ef4a39ae 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index c5b041372e..dcb6927040 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Croquizador - + CarbonCopy Copia de Carbón - + Copies the geometry of another sketch Copia la geometría de otro croquis @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Croquizador - + Constrain arc or circle Restringir el arco o círculo - + Constrain an arc or a circle Limitar un arco o un círculo - + Constrain radius Restringir radio - + Constrain diameter Restringir el diámetro @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Croquizador - + Create arc Crear arco - + Create an arc in the sketcher Crear un arco en el croquizador - + Center and end points Centro y puntos finales - + End points and rim point Puntos finales y punto de borde @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Croquizador - + Create a B-spline Crear B-spline - + Create a B-spline in the sketch Crear B-spline en el croquis @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Croquizador - + Create circle Crear circunferencia - + Create a circle in the sketcher Crea una circunferencia en el croquis - + Center and rim point Punto centro y borde - + 3 rim points 3 puntos del borde @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Croquizador - + Create a conic Crear una curva cónica - + Create a conic in the sketch Crear una curva cónica en el croquis - + Ellipse by center, major radius, point Elipse mediante centro, radio mayor y punto - + Ellipse by Periapsis, apoapsis, minor radius Elipse mediante periastro, apoastro y radio menor - + Arc of ellipse by center, major radius, endpoints Arco de elipse mediante centro, radio mayor y extremos - + Arc of hyperbola by center, major radius, endpoints Arco de hipérbola mediante centro, radio mayor y extremos - + Arc of parabola by focus, vertex, endpoints Arco de parábola por foco, vértices, extremos @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Croquizador - + Create regular polygon Crear polígono regular - + Create a regular polygon in the sketcher Crear un polígono regular en el sketcher - + Triangle Triángulo - + Square Cuadrado - + Pentagon Pentágono - + Hexagon Hexágono - + Heptagon Heptágono - + Octagon Octágono - + Regular Polygon Polígono Regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Croquizador - + Constrain angle Restringir ángulo - + Fix the angle of a line or the angle between two lines Fijar el ángulo de una línea o el ángulo entre dos líneas @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Croquizador - + Constrain Block Bloque de Restricción - + Create a Block constraint on the selected item Crea un bloque de restricción desde el objeto seleccionado @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Croquizador - + Constrain coincident Restricción de coincidencia - + Create a coincident constraint on the selected item Crear una restricción de coincidencia en el elemento seleccionado @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Croquizador - + Constrain diameter Restringir el diámetro - + Fix the diameter of a circle or an arc Fijar el diámetro de un círculo o un arco @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Croquizador - + Constrain distance Restricción de distancia - + Fix a length of a line or the distance between a line and a vertex Fijar una longitud de una línea o la distancia entre una línea y un vértice @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Croquizador - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fijar la distancia horizontal entre dos puntos o extremos de línea @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Croquizador - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fijar la distancia vertical entre dos puntos o extremos de línea @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Croquizador - + Constrain equal Restringir igualdad - + Create an equality constraint between two lines or between circles and arcs Crear una restricción de igualdad entre dos líneas o entre círculos y arcos @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Croquizador - + Constrain horizontally Restringir horizontalmente - + Create a horizontal constraint on the selected item Crear una restricción horizontal en el elemento seleccionado @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Croquizador - + Constrain InternalAlignment Restringir AlineamientoInterno - + Constrains an element to be aligned with the internal geometry of another element Restringe un elemento para alinearse con la geometría interna de otro elemento @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Croquizador - + Constrain lock Restricción de bloqueo - + Create a lock constraint on the selected item Crear una restricción de bloqueo en el elemento seleccionado @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Croquizador - + Constrain parallel Restricción de paralelismo - + Create a parallel constraint between two lines Crear una restricción entre dos líneas paralelas @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Croquizador - + Constrain perpendicular Restricción perpendicular - + Create a perpendicular constraint between two lines Crear una restricción perpendicular entre dos líneas @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Croquizador - + Constrain point onto object Restringir punto en objeto - + Fix a point onto an object Fijar un punto sobre un objeto @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Croquizador - + Constrain radius Restringir radio - + Fix the radius of a circle or an arc Fijar el radio de un círculo o arco @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Croquizador - + Constrain refraction (Snell's law') Restricción de refracción (Ley de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Crea una restricción de ley de refracción (ley de Snell) entre dos extremos de los rayos y una arista como interfaz. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Croquizador - + Constrain symmetrical Restricción de simetría - + Create a symmetry constraint between two points with respect to a line or a third point Crear una restricción de simetría entre dos puntos con respecto a una línea o un tercer punto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Croquizador - + Constrain tangent Restricción tangencial - + Create a tangent constraint between two entities Crear una restricción tangencial entre dos entidades @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Croquizador - + Constrain vertically Restricción de verticalidad - + Create a vertical constraint on the selected item Crear una restricción vertical en el elemento seleccionado @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Croquizador - + Create arc by three points Crear arco con tres puntos - + Create an arc by its end points and a point along the arc Crear un arco por sus extremos y un punto a lo largo del arco @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Croquizador - + Create circle by three points Crear un círculo por tres puntos - + Create a circle by 3 perimeter points Crear un círculo por 3 puntos perimetrales @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Croquizador - + Create arc by center Crear arco por centro - + Create an arc by its center and by its end points Crear un arco por su centro y sus extremos @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Croquizador - + Create an arc of ellipse Crear un arco de elipse - + Create an arc of ellipse in the sketch Crear un arco de elipse en el croquis @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Croquizador - + Create an arc of hyperbola Crear un arco de hipérbola - + Create an arc of hyperbola in the sketch Crear un arco de hipérbola en el croquis @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Croquizador - + Create an arc of parabola Crear un arco de parábola - + Create an arc of parabola in the sketch Crear un arco de parábola en el croquis @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Croquizador - + Create B-spline Crear B-spline - + Create a B-spline via control points in the sketch. Crear un B-spline a través de puntos de control en el croquis. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Croquizador - + Create circle Crear circunferencia - + Create a circle in the sketch Crea una circunferencia en el croquis @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Croquizador - + Create draft line Crear línea auxiliar - + Create a draft line in the sketch Crea una línea auxiliar en el croquis @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Croquizador - + Create ellipse by 3 points Crear elipse mediante 3 puntos - + Create an ellipse by 3 points in the sketch Crear elipse en el croquis mediante 3 puntos @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Croquizador - + Create ellipse by center Crear elipse mediante centro - + Create an ellipse by center in the sketch Crear una elipse en el boceto mediante centro @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Croquizador - + Create fillet Crear redondeo - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Croquizador - + Create heptagon Crear heptágono - + Create a heptagon in the sketch Crear un heptágono en el croquis @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Croquizador - + Create hexagon Crear hexágono - + Create a hexagon in the sketch Crear un hexágono en el croquis @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Croquizador - + Create line Crear línea - + Create a line in the sketch Crea una línea en el croquis @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Croquizador - + Create octagon Crear octágono - + Create an octagon in the sketch Crear un octágono en el boceto @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Croquizador - + Create pentagon Crear pentágono - + Create a pentagon in the sketch Crear un pentágono en el croquis @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Croquizador - + Create periodic B-spline Crear una B-spline periódica - + Create a periodic B-spline via control points in the sketch. Crear un B-spline periódica mediante puntos de control en el croquis. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Croquizador - + Create point Crear punto - + Create a point in the sketch Crea un punto en el croquis @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Croquizador - + Create polyline Crear polilínea - + Create a polyline in the sketch. 'M' Key cycles behaviour Crear una polilínea en el croquis. La tecla 'M' cambia su comportamiento @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Croquizador - + Create rectangle Crear rectángulo - + Create a rectangle in the sketch Crea un rectángulo en el croquis @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Croquizador - + Create regular polygon Crear polígono regular - + Create a regular polygon in the sketch Crea un polígono regular en el boceto @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Croquizador - + Create slot Crear ranura - + Create a slot in the sketch Crear ranura en el croquis @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Croquizador - + Create square Crear cuadrado - + Create a square in the sketch Crear un cuadrado en el croquis @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Croquizador - + Create text Crear texto - + Create text in the sketch Crear texto en el croquis @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Croquizador - + Create equilateral triangle Crear triángulo equilátero - + Create an equilateral triangle in the sketch Crear un triángulo equilátero en el croquis @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Croquizador - + Extend edge Extender borde - + Extend an edge with respect to the picked position Extender un borde con respecto a la posición seleccionada @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Croquizador - + External geometry Geometría externa - + Create an edge linked to an external geometry Crear una arista vinculada a una geometría externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Croquizador - + Toggle activate/deactivate constraint Activar/desactivar restricción - + Toggles activate/deactivate state for selected constraints Activa o desactiva el estado para las restricciones seleccionadas @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Croquizador - + Toggle reference/driving constraint Alterna restricciones de referencia - + Toggles the toolbar or selected constraints to/from reference mode Cambia la barra de herramientas o las restricciones seleccionadas a/desde el modo referencia @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Croquizador - + Trim edge Recortar arista - + Trim an edge with respect to the picked position Recortar una arista con respecto a la posición elegida @@ -1952,47 +1952,47 @@ Error de autorestricción: boceto sin solución después de aplicar restricciones de igualdad. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. No se puede adivinar la intersección de curvas. Intente agregar una restricción coincidente entre los vértices de las curvas que pretende rellenar. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versión de OCE/OCC no permite operación de nudo. Necesita 6.9.0 o superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometría BSpline (GeoID) está fuera de restricciones. - + You are requesting no change in knot multiplicity. Usted esta solicitando no cambio en multiplicidad de nudo. - + The Geometry Index (GeoId) provided is not a B-spline curve. El índice de geometría (GeoID) proporcionado no es una curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. El índice de nudo es fuera de los limites. Note que según en concordancia con notación de la OCC, el primer nudo tiene índice 1 y no 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicidad no puede incrementarse más allá del grado de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicidad no puede ser disminuida más allá de cero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC es incapaz de disminuir la multiplicidad dentro de la tolerancia máxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Seleccione arista(s) del croquis. - - - - + + + + Dimensional constraint Restricción dimensional @@ -2232,273 +2232,273 @@ Uno de los seleccionados debe ser en el croquis - - + + Select an edge from the sketch. Seleccione una arista del croquis. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Restricción imposible - - - - + + + + The selected edge is not a line segment La arista seleccionada no es un segmento de línea - - - - - - + + + + + + Double constraint Restricción doble - - - - + + + + The selected edge already has a horizontal constraint! ¡La arista seleccionada ya tiene una restricción horizontal! - - - - + + + + The selected edge already has a vertical constraint! ¡El borde seleccionado ya tiene una restricción vertical! - - - - - - + + + + + + The selected edge already has a Block constraint! ¡La arista seleccionada ya tiene una restricción de Bloque! - + The selected item(s) can't accept a horizontal constraint! ¡El(los) elemento(s) seleccionado(s) no pueden aceptar una restricción horizontal! - + There are more than one fixed point selected. Select a maximum of one fixed point! Hay mas de un punto fijo seleccionado.! Debe seleccionar solamente un punto Fijo! - + The selected item(s) can't accept a vertical constraint! ¡El(los) elemento(s) seleccionado(s) no admiten una restricción vertical! - + There are more than one fixed points selected. Select a maximum of one fixed point! Hay mas de un punto fijo seleccionado. Debe seleccionar solamente un punto Fijo! - - + + Select vertices from the sketch. Selecciona vértices del croquis. - + Select one vertex from the sketch other than the origin. Seleccione un vértice del croquis que no sea el origen. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selecciona sólo vértices del croquis. El último vértice seleccionado puede ser el origen. - + Wrong solver status Estado de Solver Incorrecto - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Una restriccion de Bloque no puede ser añadida si el Croquis no esta resuelto o tiene un error redundante y/o restricciones en conflicto. - + Select one edge from the sketch. Seleccione una arista del croquis. - + Select only edges from the sketch. Seleccione únicamente aristas de el Croquis. - - - - - - - + + + + + + + Error Error - + Select two or more points from the sketch. Seleccione dos o más puntos del croquis. - - + + Select two or more vertexes from the sketch. Seleccione dos o más vértices en el croquis. - - + + Constraint Substitution Subsititución de Restricción - + Endpoint to endpoint tangency was applied instead. Una Tangente de Puntos de Extremo se aplicó en su lugar. - + Select vertexes from the sketch. Seleccione los vértices del croquis. - - + + Select exactly one line or one point and one line or two points from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos del croquis. - + Cannot add a length constraint on an axis! ¡No se puede añadir una restricción de longitud en un eje! - + This constraint does not make sense for non-linear curves Esta restricción no tiene sentido para curvas no lineales - - - - - - + + + + + + Select the right things from the sketch. Seleccione las cosas correctas desde el croquis. - - + + Point on B-spline edge currently unsupported. Punto sobre arista de B-spline no compatible por el momento. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ninguno de los puntos seleccionados fueron limitados en las curvas respectivas, porque son partes de un mismo elemento, o porque son ambos de geometría externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Seleccione un punto y varias curvas, o una curva y varios puntos. Ha seleccionado las %1 curvas y %2 puntos. - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccione exactamente una línea o hasta dos puntos del croquis. - + Cannot add a horizontal length constraint on an axis! ¡No se puede añadir una restricción de longitud horizontal en un eje! - + Cannot add a fixed x-coordinate constraint on the origin point! ¡No se puede agregar una restricción de coordenada x fija en el punto de origen! - - + + This constraint only makes sense on a line segment or a pair of points Esta restricción sólo tiene sentido en un segmento de línea o un par de puntos - + Cannot add a vertical length constraint on an axis! ¡No se puede añadir una restricción de longitud vertical sobre un eje! - + Cannot add a fixed y-coordinate constraint on the origin point! ¡No se puede agregar una restricción de coordenada y fija en el punto de origen! - + Select two or more lines from the sketch. Seleccione dos o más líneas del croquis. - - + + Select at least two lines from the sketch. Seleccione al menos dos líneas del croquis. - + Select a valid line Seleccione una línea válida - - + + The selected edge is not a valid line La arista seleccionada no es una línea válida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2507,45 +2507,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Las combinaciones posibles son: dos curvas; extremo y curva; dos extremos; dos curvas y un punto. - + Select some geometry from the sketch. perpendicular constraint Seleccione alguna geometría del croquis. - + Wrong number of selected objects! perpendicular constraint ¡Número incorrecto de objetos seleccionados! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Con 3 objetos, debe haber 2 curvas y 1 punto. - - + + Cannot add a perpendicularity constraint at an unconnected point! ¡No se puede añadir una restricción de perpendicularidad en un punto no conectado! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular a arista de B-spline no compatible por el momento. - - + + One of the selected edges should be a line. ¡Una de las aristas seleccionadas debe ser una línea. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2555,249 +2555,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos curvas y un punto. - + Select some geometry from the sketch. tangent constraint Seleccione alguna geometría del croquis. - + Wrong number of selected objects! tangent constraint ¡Número incorrecto de objetos seleccionados! - - - + + + Cannot add a tangency constraint at an unconnected point! ¡No se puede añadir una restricción de tangencia en un punto no conectado! - - - + + + Tangency to B-spline edge currently unsupported. Tangencia sobre arista de B-spline no compatible por el momento. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Una Tangente de Puntos de Estremo fue aplicada, La restricción coincidente fue eliminada. - - - - + + + + Select one or more arcs or circles from the sketch. Seleccione uno o más arcos o círculos del croquis. - - + + Constrain equal Restringir igualdad - + Do you want to share the same radius for all selected elements? ¿Quieres compartir el mismo radio para todos los elementos seleccionados? - - + + Constraint only applies to arcs or circles. La restricción sólo se aplica a los arcos o círculos. - + Do you want to share the same diameter for all selected elements? ¿Quieres compartir el mismo diámetro para todos los elementos seleccionados? - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccione una o dos líneas del croquis. O seleccione un punto y dos aristas. - - + + Parallel lines Líneas paralelas - - + + An angle constraint cannot be set for two parallel lines. Una restricción de ángulo no puede ser establecida por dos lineas paralelas. - + Cannot add an angle constraint on an axis! ¡No se puede añadir una restricción angular en un eje! - + Select two edges from the sketch. Seleccione dos aristas del croquis. - - + + Select two or more compatible edges Seleccione dos o más aristas compatibles - + Sketch axes cannot be used in equality constraints Los ejes del croquis no pueden utilizarse en las restricciones de igualdad - + Equality for B-spline edge currently unsupported. Igualdad para arista de B-Spline no compatible por el momento. - - + + Select two or more edges of similar type Seleccione dos o más aristas de similar clase - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccione dos puntos y una línea de simetría, dos puntos y un punto de simetría o una línea y un punto de simetría del croquis. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! ¡No se puede añadir una restricción de simetría entre una línea y sus extremos! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccione dos puntos finales de líneas para actuar como rayos y una arista que representa un límite. El primer punto seleccionado corresponde al índice n1, n2 - al segundo y valor de referencia establece la relación n2/n1. - + Selected objects are not just geometry from one sketch. Los objetos seleccionados no son sólo la geometría de un croquis. - + Number of selected objects is not 3 (is %1). El número de objetos seleccionados no es 3 (es %1). - + Cannot create constraint with external geometry only!! No se puede crear una restricción solo con geometría externa!! - + Incompatible geometry is selected! ¡Se han seleccionado geometrías incompatibles! - + SnellsLaw on B-spline edge currently unsupported. Ley de Snell sobre arista de B-spline no compatible por el momento. - - + + Select at least one ellipse and one edge from the sketch. Seleccione al menos una elipse y una curva del croquis. - + Sketch axes cannot be used in internal alignment constraint Ejes del croquis no pueden ser usados en el alineamiento interno de restricciones - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. No puedes restringir internamente una elipse con otra elipse. Solamente selecciona una elipse. - - + + Maximum 2 points are supported. Son admitidos un máximo de 2 puntos. - - + + Maximum 2 lines are supported. Son admitidos un máximo de 2 líneas. - - + + Nothing to constrain Nada que restringir - + Currently all internal geometry of the ellipse is already exposed. La geometría interna de la elipse ya está expuesta al completo. - - - - + + + + Extra elements Elementos adicionales - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Se han proporcionado más elementos de los necesarios para la elipse dada. Se han ignorado. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. No puedes restringir internamente un arco de elipse con otro arco de elipse. Selecciona un solo arco de elipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. No puedes restringir internamente una elipse con un arco de elipse. Selecciona una sola elipse o un arco de elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. La geometría interna del arco de elipse ya está expuesta por completo. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Fueron proporcionado más elementos de los necesarios para el arco de la elipse. Estas fueron ignoradas. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actualmente sólo es soportada la geometría interna de elipse o arco de elipse. El último elemento seleccionado debe ser una elipse o un arco de elipse. - - - - - + + + + + @@ -2805,7 +2805,7 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Seleccionar la(s) limitación(es) del croquis. - + CAD Kernel Error Error del Kernel CAD @@ -2940,42 +2940,42 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. La copia de carbón podría causar una dependencia circular. - + This object is in another document. Este objeto está en otro documento. - + This object belongs to another body. Hold Ctrl to allow cross-references. Este objeto pertenece a otro cuerpo. Mantenga pulsado Ctrl para permitir referencias cruzadas. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Este objeto pertenece a otro cuerpo y contiene geometría externa. Referencia cruzada no permitida. - + This object belongs to another part. Este objeto pertenece a otra pieza. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. El croquis seleccionado no es paralelo a este croquis. Mantenga pulsado Ctrl + Alt para permitir croquis no paralelos. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Los ejes XY del croquis seleccionado no tienen la misma dirección en este croquis. Mantenga pulsado Ctrl + Alt para ignorarlo. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. El origen del croquis seleccionado no está alineado con el origen de este croquis. Mantenga pulsado Ctrl + Alt para ignorarlo. @@ -3061,8 +3061,8 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Insertar radio - - + + Radius: Radio: @@ -3073,8 +3073,8 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Introduzca el diámetro - - + + Diameter: Diámetro: @@ -3102,24 +3102,24 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Longitud: - - + + Change radius Cambiar radio - - + + Change diameter Cambiar Diámetro - + Refractive index ratio Índice refracción - + Ratio n2/n1: Razón n2/n1: @@ -3135,22 +3135,22 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Enlazar esto causará dependencia circular. - + This object is in another document. Este objeto está en otro documento. - + This object belongs to another body, can't link. Este objeto pertenece a otra pieza, no se puede vincular. - + This object belongs to another part, can't link. Este objeto pertenece a otra pieza, no se puede vincular. @@ -3191,8 +3191,8 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c SketcherGui::PropertyConstraintListItem - - + + Unnamed Sin nombre @@ -3908,6 +3908,26 @@ Sin embargo, no se encontraron restricciones a los extremos. All constraints that deal with external geometry were deleted. Se eliminaron todas las restricciones que tienen que ver con la geometría externa. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4254,70 +4274,77 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Validación de croquis - + Invalid constraints Restricciones no válidas - - + + + Fix Reparar - - + + + Find Encontrar - + Delete constraints to external geom. Eliminar restricciones a la geometría externa. - + Missing coincidences Falta de coincidencias - + Tolerance: Tolerancia: - + Highlight open vertexes Resaltar vértices abiertos - + Ignore construction geometry Ignorar la geometría de constriucción + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometría externa invertida - + Swap endpoints in constraints Intercambiar puntos finales en resticciones - + Constraint orientation locking Bloqueo de restricción de orientación - + Enable/Update Habilitar/Actualizar - + Disable Deshabilitar @@ -4325,104 +4352,104 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc SketcherGui::ViewProviderSketch - + Edit sketch Editar boceto - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + Do you want to close this dialog? ¿Desea cerrar este diálogo? - + Invalid sketch Croquis no válido - + Do you want to open the sketch validation tool? ¿Desea abrir la herramienta de validación del croquis? - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + Please remove the following constraint: Elimine la siguiente restricción: - + Please remove at least one of the following constraints: Por favor elimine al menos una de las siguientes restricciones: - + Please remove the following redundant constraint: Por favor elimine la siguiente restricción redundante: - + Please remove the following redundant constraints: Por favor elimine las siguientes restricciones redundante: - + Empty sketch Croquis vacío - + Over-constrained sketch Croquis sobre-restringido - - - + + + (click to select) (Clic para seleccionar) - + Sketch contains conflicting constraints Croquis contiene restricciones conflictivas - + Sketch contains redundant constraints Croquis contiene restricciones redundantes - + Fully constrained sketch Croquis completamente restringido - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Croquis bajo-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grado</span></a> de libertad - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Croquis bajo-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 grados</span></a> de libertad - + Solved in %1 sec Resuelto en %1 seg - + Unsolved (%1 sec) Sin resolver (%1 seg) @@ -4511,8 +4538,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fijar el diámetro de un círculo o un arco @@ -4520,8 +4547,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fijar el radio de un círculo o arco @@ -4538,8 +4565,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Crear un arco por sus extremos y un punto a lo largo del arco @@ -4547,8 +4574,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Crear círculo por 3 puntos @@ -4556,8 +4583,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateArc - - + + Create an arc by its center and by its end points Crear un arco por su centro y sus extremos @@ -4565,8 +4592,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Crear un arco de elipse mediante centro, radio mayor y extremos @@ -4574,8 +4601,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Crear un arco de hipérbola mediante su centro, radio mayor y extremos @@ -4583,8 +4610,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Crear un arco de parábola por su foco, vértices, extremos @@ -4592,13 +4619,13 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateBSpline - + B-spline by control points B-spline por puntos de control o polos - - + + Create a B-spline by control points Crear una B-spline por puntos de control o polos @@ -4606,8 +4633,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Crear un círculo por centro y un punto exterior @@ -4615,8 +4642,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Crear una elipse mediante periapsis, apoapsis y radio menor @@ -4624,8 +4651,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Crear una elipse mediante centro, radio mayor y un punto @@ -4633,8 +4660,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Crear un heptágono mediante centro y vértice @@ -4642,8 +4669,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Crear un hexágono mediante centro y vértice @@ -4651,14 +4678,14 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Crear un octágono mediante centro y vértice - - + + Create a regular polygon by its center and by one corner Crear un polígono regular por su centro y por una esquina @@ -4666,8 +4693,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Crear un pentágono mediante centro y vértice @@ -4675,8 +4702,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateSquare - - + + Create a square by its center and by one corner Crear un cuadrado mediante centro y vértice @@ -4684,8 +4711,8 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Crear un triángulo equilátero mediante centro y vértice @@ -4693,13 +4720,13 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periódica por puntos de control o polos - - + + Create a periodic B-spline by control points Crear un B-spline periódico mediante puntos de control diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm index a982163af4..59c4df9d15 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index 37f27ae3ed..8a5c13e83c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Krokisgilea - + CarbonCopy Kalkoa - + Copies the geometry of another sketch Beste krokis bateko geometria kopiatzen du @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Krokisgilea - + Constrain arc or circle Murriztu arkua edo zirkulua - + Constrain an arc or a circle Murriztu arku bat edo zirkulu bat - + Constrain radius Murriztu erradioa - + Constrain diameter Murriztu diametroa @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Krokisgilea - + Create arc Sortu arkua - + Create an arc in the sketcher Sortu arku bat krokisgilean - + Center and end points Puntu zentrala eta bukaerakoa - + End points and rim point Bukaera puntuak eta ertzeko puntua @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Krokisgilea - + Create a B-spline Sortu B-spline bat - + Create a B-spline in the sketch Sortu B-spline bat krokisean @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Krokisgilea - + Create circle Sortu zirkulua - + Create a circle in the sketcher Sortu zirkulu bat krokisgilean - + Center and rim point Puntu zentrala eta ertzeko puntua - + 3 rim points 3 ertzeko puntu @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Krokisgilea - + Create a conic Sortu koniko bat - + Create a conic in the sketch Sortu kono bat krokisgilean - + Ellipse by center, major radius, point Elipsea puntu zentrala, erradio handia eta puntu baten bidez - + Ellipse by Periapsis, apoapsis, minor radius Elipse periapsi, apoapsi eta erradio txikiaren bidez - + Arc of ellipse by center, major radius, endpoints Elipse-arku bat puntu zentrala, erradio handia eta amaiera-puntuak erabiliz - + Arc of hyperbola by center, major radius, endpoints Hiperbola-arku bat puntu zentrala, erradio handia eta amaiera-puntuak erabiliz - + Arc of parabola by focus, vertex, endpoints Parabola-arku bat fokua, erpina eta amaiera-puntuak erabiliz @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Krokisgilea - + Create regular polygon Sortu poligono erregularra - + Create a regular polygon in the sketcher Sortu poligono erregular bat krokisgilean - + Triangle Triangelua - + Square Laukia - + Pentagon Pentagonoa - + Hexagon Hexagonoa - + Heptagon Heptagonoa - + Octagon Oktagonoa - + Regular Polygon Poligono erregularra @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Krokisgilea - + Constrain angle Murriztu angelua - + Fix the angle of a line or the angle between two lines Finkatu lerro baten angelua edo bi lerroren arteko angelua @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Krokisgilea - + Constrain Block Murriztu blokea - + Create a Block constraint on the selected item Sortu bloke-murrizketa bat hautatutako elementuan @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Krokisgilea - + Constrain coincident Murriztu bat datozenak - + Create a coincident constraint on the selected item Sortu bat-etortzeen murrizketa hautatutako elementuan @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Krokisgilea - + Constrain diameter Murriztu diametroa - + Fix the diameter of a circle or an arc Finkatu zirkulu baten edo arku baten diametroa @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Krokisgilea - + Constrain distance Murriztu distantzia - + Fix a length of a line or the distance between a line and a vertex Finkatu lerro baten luzera edo lerro baten eta erpin baten arteko distantzia @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Krokisgilea - + Constrain horizontal distance Murriztu distantzia horizontala - + Fix the horizontal distance between two points or line ends Finkatu bi punturen edo bi lerro-amaieren arteko distantzia horizontala @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Krokisgilea - + Constrain vertical distance Murriztu distantzia bertikala - + Fix the vertical distance between two points or line ends Finkatu bi punturen edo bi lerro-amaieren arteko distantzia bertikala @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Krokisgilea - + Constrain equal Murriztu berdin - + Create an equality constraint between two lines or between circles and arcs Sortu berdintasun-murrizketa bat bi lerroren artean edo zirkuluen eta arkuen artean @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Krokisgilea - + Constrain horizontally Murriztu horizontalean - + Create a horizontal constraint on the selected item Sortu murrizketa horizontala hautatutako elementuan @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Krokisgilea - + Constrain InternalAlignment Murriztu barne-lerrokatzea - + Constrains an element to be aligned with the internal geometry of another element Elementu bat beste baten barne-geometriarekin lerroka dadin murrizten du @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Krokisgilea - + Constrain lock Blokeo-murrizketa - + Create a lock constraint on the selected item Sortu blokeo-murrizketa bat hautatutako elementuan @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Krokisgilea - + Constrain parallel Murriztu paraleloa - + Create a parallel constraint between two lines Sortu murrizketa paraleloa bi lerroren artean @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Krokisgilea - + Constrain perpendicular Murriztu perpendikularra - + Create a perpendicular constraint between two lines Sortu murrizketa perpendikularra bi lerroren artean @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Krokisgilea - + Constrain point onto object Murriztu puntua objektuan - + Fix a point onto an object Finkatu puntu bat objektu batean @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Krokisgilea - + Constrain radius Murriztu erradioa - + Fix the radius of a circle or an arc Finkatu zirkulu baten edo arku baten erradioa @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Krokisgilea - + Constrain refraction (Snell's law') Murriztu errefrakzioa (Snell-en legea) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Sortu Snell-en errefrakzio-legearen murrizketa bat, izpien bi amaiera-punturen artean eta ertz bat interfaze modura erabilita. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Krokisgilea - + Constrain symmetrical Murriztu simetrikoki - + Create a symmetry constraint between two points with respect to a line or a third point Sortu simetria-murrizketa bat bi punturen artean, lerro batekiko edo hirugarren puntu batekiko @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Krokisgilea - + Constrain tangent Murriztu tangentea - + Create a tangent constraint between two entities Sortu murrizketa tangentea bi lerroren artean @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Krokisgilea - + Constrain vertically Murriztu bertikalean - + Create a vertical constraint on the selected item Sortu murrizketa bertikala hautatutako elementuan @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Krokisgilea - + Create arc by three points Sortu arkua hiru puntutik abiatuz - + Create an arc by its end points and a point along the arc Sortu arku bat amaiera-puntuak eta arkuan dagoen puntu bat erabiliz @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Krokisgilea - + Create circle by three points Sortu zirkulua hiru puntutik abiatuz - + Create a circle by 3 perimeter points Sortu zirkulu bat 3 perimetro-puntutik abiatuz @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Krokisgilea - + Create arc by center Sortu arkua erdigunetik abiatuz - + Create an arc by its center and by its end points Sortu arku bat puntu zentrala eta amaiera-puntuak erabiliz @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Krokisgilea - + Create an arc of ellipse Sortu elipse-arku bat - + Create an arc of ellipse in the sketch Sortu elipse-arku bat krokisean @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Krokisgilea - + Create an arc of hyperbola Sortu hiperbola-arku bat - + Create an arc of hyperbola in the sketch Sortu hiperbola-arku bat krokisean @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Krokisgilea - + Create an arc of parabola Sortu parabola-arku bat - + Create an arc of parabola in the sketch Sortu parabola-arku bat krokisean @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Krokisgilea - + Create B-spline Sortu B-spline elementua - + Create a B-spline via control points in the sketch. Sortu B-spline bat krokiseko kontrol-puntuak erabilita. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Krokisgilea - + Create circle Sortu zirkulua - + Create a circle in the sketch Sortu zirkulu bat krokisean @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Krokisgilea - + Create draft line Sortu zirriborro-lerroa - + Create a draft line in the sketch Sortu zirriborro-lerro bat krokisean @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Krokisgilea - + Create ellipse by 3 points Sortu elipsea hiru puntutik abiatuz - + Create an ellipse by 3 points in the sketch Sortu elipse bat krokisean 3 puntutik abiatuz @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Krokisgilea - + Create ellipse by center Sortu elipsea erdigunetik abiatuz - + Create an ellipse by center in the sketch Sortu elipse bat krokisean erdigunetik abiatuz @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Krokisgilea - + Create fillet Sortu biribiltzea - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Krokisgilea - + Create heptagon Sortu heptagonoa - + Create a heptagon in the sketch Sortu heptagono bat krokisean @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Krokisgilea - + Create hexagon Sortu hexagonoa - + Create a hexagon in the sketch Sortu hexagono bat krokisean @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Krokisgilea - + Create line Sortu lerroa - + Create a line in the sketch Sortu lerro bat krokisean @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Krokisgilea - + Create octagon Sortu oktogonoa - + Create an octagon in the sketch Sortu oktogono bat krokisean @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Krokisgilea - + Create pentagon Sortu pentagonoa - + Create a pentagon in the sketch Sortu pentagono bat krokisean @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Krokisgilea - + Create periodic B-spline Sortu B-spline periodikoa - + Create a periodic B-spline via control points in the sketch. Sortu B-spline periodiko bat krokiseko kontrol-puntuak erabilita. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Krokisgilea - + Create point Sortu puntua - + Create a point in the sketch Sortu puntu bat krokisean @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Krokisgilea - + Create polyline Sortu polilerroa - + Create a polyline in the sketch. 'M' Key cycles behaviour Sortu polilerro bat krokisean. 'M' teklak portaera ziklikoa sortzen du @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Krokisgilea - + Create rectangle Sortu laukizuzena - + Create a rectangle in the sketch Sortu laukizuzen bat krokisean @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Krokisgilea - + Create regular polygon Sortu poligono erregularra - + Create a regular polygon in the sketch Sortu poligono erregular bat krokisean @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Krokisgilea - + Create slot Sortu arteka - + Create a slot in the sketch Sortu arteka bat krokisean @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Krokisgilea - + Create square Sortu laukia - + Create a square in the sketch Sortu lauki bat krokisean @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Krokisgilea - + Create text Sortu testua - + Create text in the sketch Sortu testua krokisean @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Krokisgilea - + Create equilateral triangle Sortu triangelu aldeberdina - + Create an equilateral triangle in the sketch Sortu triangelu aldeberdin bat krokisean @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Krokisgilea - + Extend edge Hedatu ertza - + Extend an edge with respect to the picked position Hedatu ertz bat aukeratutako posizioaren arabera @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Krokisgilea - + External geometry Kanpo-geometria - + Create an edge linked to an external geometry Sortu kanpo-geometria bati estekatutako ertz bat @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Krokisgilea - + Toggle activate/deactivate constraint Aktibatu/desaktibatu murrizketa - + Toggles activate/deactivate state for selected constraints Hautatutako murrizketen egoera aktiboa/inaktiboa ezartzen du @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Krokisgilea - + Toggle reference/driving constraint Txandakatu erreferentziako/gidatzeko murrizketa - + Toggles the toolbar or selected constraints to/from reference mode Tresna-barra edo hautatutako murrizketak txandakatzen ditu erreferentzia modura @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Krokisgilea - + Trim edge Muxarratu ertza - + Trim an edge with respect to the picked position Muxarratu ertz bat aukeratutako posizioaren arabera @@ -1952,47 +1952,47 @@ Automurrizketa-errorea: Ebatzi ezin den krokisa berdintasun-murrizketak aplikatu ondoren. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Ezin izan da kurben ebakidura antzeman. Saiatu bat datorren murrizketa bat gehitzen biribildu nahi dituzun kurben erpinen artean. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. OCE/OCC bertsio honek ez du onartzen adabegien gaineko eragiketarik. 6.9.0 bertsioa edo berriagoa behar duzu. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline geometria-indizea (GeoID) mugetatik kanpo dago. - + You are requesting no change in knot multiplicity. Adabegi-aniztasunean aldaketarik ez egitea eskatzen ari zara. - + The Geometry Index (GeoId) provided is not a B-spline curve. Hornitutako geometria-indizea (GeoId) ez da Bspline kurba bat. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Adabegi-indizea mugetatik kanpo dago. Kontuan izan, OCC notazioaren arabera, lehen adabegiaren indize-zenbakiak 1 izan behar duela, ez 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Aniztasuna ezin da handitu Bspline-aren gradutik gora. - + The multiplicity cannot be decreased beyond zero. Aniztasuna ezin da txikitu zerotik behera. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC-k ezin du aniztasuna txikitu tolerantzia maximoaren barruan. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Hautatu krokiseko ertza(k). - - - - + + + + Dimensional constraint Kota-murrizketa @@ -2232,273 +2232,273 @@ Hautatuetako batek krokisean egon behar du - - + + Select an edge from the sketch. Hautatu krokiseko ertz bat. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Ezinezko murrizketa - - - - + + + + The selected edge is not a line segment Hautatutako ertza ez da lerro-segmentu bat - - - - - - + + + + + + Double constraint Murrizketa bikoitza - - - - + + + + The selected edge already has a horizontal constraint! Hautatutako ertzak badauka murrizketa horizontal bat! - - - - + + + + The selected edge already has a vertical constraint! Hautatutako ertzak badauka murrizketa bertikal bat! - - - - - - + + + + + + The selected edge already has a Block constraint! Hautatutako ertzak badauka bloke-murrizketa bat! - + The selected item(s) can't accept a horizontal constraint! Hautatutako elementua(e)k ez du(te) murrizketa horizontal bat onartzen! - + There are more than one fixed point selected. Select a maximum of one fixed point! Puntu finko bat baino gehiago dago hautatuta. Gehienez puntu finko bakarra hautatu behar duzu! - + The selected item(s) can't accept a vertical constraint! Hautatutako elementua(e)k ez du(te) murrizketa bertikal bat onartzen! - + There are more than one fixed points selected. Select a maximum of one fixed point! Puntu finko bat baino gehiago dago hautatuta. Gehienez puntu finko bakarra hautatu behar duzu! - - + + Select vertices from the sketch. Hautatu krokiseko erpinak. - + Select one vertex from the sketch other than the origin. Hautatu krokiseko erpin bat, jatorria ez dena. - + Select only vertices from the sketch. The last selected vertex may be the origin. Hautatu krokiseko erpinak soilik. Hautatutako azken erpina jatorria izan daiteke. - + Wrong solver status Ebazle-egoera okerra - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Ezin da bloke-murrizketarik gehitu krokisa ebatzi gabe badago edo murrizketa errepikatuak eta/edo gatazkan daudenak badaude. - + Select one edge from the sketch. Hautatu krokiseko ertz bat. - + Select only edges from the sketch. Hautatu krokiseko ertzak soilik. - - - - - - - + + + + + + + Error Errorea - + Select two or more points from the sketch. Hautatu krokiseko bi puntu edo gehiago. - - + + Select two or more vertexes from the sketch. Hautatu krokiseko bi erpin edo gehiago. - - + + Constraint Substitution Murrizketen ordezkapena - + Endpoint to endpoint tangency was applied instead. Amaiera-puntutik amaiera-punturako tangentzia aplikatu da horren ordez. - + Select vertexes from the sketch. Hautatu krokiseko erpinak. - - + + Select exactly one line or one point and one line or two points from the sketch. Hautatu krokiseko lerro bat edo puntu bat edo lerro bat eta bi puntu. - + Cannot add a length constraint on an axis! Ezin zaio luzera-murrizketa bat gehitu ardatz bati! - + This constraint does not make sense for non-linear curves Murrizketa honek ez du zentzurik linealak ez diren kurbekin - - - - - - + + + + + + Select the right things from the sketch. Hautatu krokiseko elementu egokiak. - - + + Point on B-spline edge currently unsupported. Oraindik ez da onartzen puntua B-spline ertzean. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Hautatutako puntuetako bat ere ez dago murriztuta bakoitzari dagokion kurban, bai elementu bereko osagai direlako bai kanpo-geometria direlako. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Hautatu puntu bat eta zenbait kurba, edo kurba bat eta zenbait puntu. %1 kurba eta %2 puntu hautatu dituzu. - - - - + + + + Select exactly one line or up to two points from the sketch. Hautatu krokiseko lerro bat, puntu bat edo bi puntu. - + Cannot add a horizontal length constraint on an axis! Ezin zaio luzera horizontaleko murrizketa bat gehitu ardatz bati! - + Cannot add a fixed x-coordinate constraint on the origin point! Ezin zaio X koordenatu finkoko murrizketa bat gehitu jatorri-puntuari! - - + + This constraint only makes sense on a line segment or a pair of points Murriztapen honek lerro-segmentuetan edo puntu-bikoteetan soilik du zentzua - + Cannot add a vertical length constraint on an axis! Ezin zaio luzera bertikaleko murrizketa bat gehitu ardatz bati! - + Cannot add a fixed y-coordinate constraint on the origin point! Ezin zaio Y koordenatu finkoko murrizketa bat gehitu jatorri-puntuari! - + Select two or more lines from the sketch. Hautatu krokiseko bi lerro edo gehiago. - - + + Select at least two lines from the sketch. Hautatu krokiseko bi lerro, gutxienez. - + Select a valid line Hautatu baliozko lerro bat - - + + The selected edge is not a valid line Hautatutako ertza ez da baliozko lerro bat - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-puntu; bi kurba eta puntu bat. - + Select some geometry from the sketch. perpendicular constraint Hautatu krokiseko geometriaren bat. - + Wrong number of selected objects! perpendicular constraint Hautatutako objektu kopuru okerra! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3 objektu badira, 2 kurba eta puntu1 egon behar dute. - - + + Cannot add a perpendicularity constraint at an unconnected point! Ezin zaio perpendikulartasun-murrizketa bat gehitu konektatu gabeko puntu bati! - - - + + + Perpendicular to B-spline edge currently unsupported. Oraindik ez da onartzen perpendikularra B-spline ertzean. - - + + One of the selected edges should be a line. Hautatutako ertzetako batek lerroa izan behar du. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-puntu; bi kurba eta puntu bat. - + Select some geometry from the sketch. tangent constraint Hautatu krokiseko geometriaren bat. - + Wrong number of selected objects! tangent constraint Hautatutako objektu kopuru okerra! - - - + + + Cannot add a tangency constraint at an unconnected point! Ezin zaio tangentzia-murrizketa gehitu konektatu gabeko puntu bati! - - - + + + Tangency to B-spline edge currently unsupported. Oraindik ez da onartzen tangentea B-Spline ertzean. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Amaiera-puntutik amaiera-punturako tangentzia aplikatu da. Bat datorren murrizketa ezabatu egin da. - - - - + + + + Select one or more arcs or circles from the sketch. Hautatu krokiseko arku edo zirkulu bat edo gehiago. - - + + Constrain equal Murriztu berdin - + Do you want to share the same radius for all selected elements? Hautatutako elementu guztiek erradio bera parteka dezaten nahi duzu? - - + + Constraint only applies to arcs or circles. Murrizketa arkuei edo zirkuluei soilik aplikatzen zaie. - + Do you want to share the same diameter for all selected elements? Hautatutako elementu guztiek diametro bera parteka dezaten nahi duzu? - - + + Select one or two lines from the sketch. Or select two edges and a point. Hautatu krokisaren lerro bat edo bi. Edo hautatu bi ertz eta puntu bat. - - + + Parallel lines Lerro paraleloak - - + + An angle constraint cannot be set for two parallel lines. Ezin da angelu-murrizketa bat ezarri bi lerro paralelotarako. - + Cannot add an angle constraint on an axis! Ezin zaio angelu-murrizketa bat gehitu ardatz bati! - + Select two edges from the sketch. Hautatu krokiseko bi ertz. - - + + Select two or more compatible edges Hautatu bateragarriak diren bi ertz edo gehiago - + Sketch axes cannot be used in equality constraints Krokis-ardatzak ezin dira erabili berdintasun-murrizketetan - + Equality for B-spline edge currently unsupported. Momentuz ez dago onartuta B-spline ertzen berdintasuna. - - + + Select two or more edges of similar type Hautatu antzekoak diren bi ertz edo gehiago - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Hautatu krokiseko bi puntu eta simetria-lerro bat, bi puntu eta simetria-puntu bat edo lerro bat eta simetria-puntu bat. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Ezin da simetria-murrizketarik gehitu lerro baten eta haren amaiera-puntuen artean! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Hautatu lerroen bi amaiera-puntu izpi gisa joka dezaten, eta muga bat ordezkatuko duen ertz bat. Hautatutako lehen puntua n1 indizeari dagokio, bigarrena n2 indizeari, eta zero puntuaren balioak n2/n1 erlazioa ezartzen du. - + Selected objects are not just geometry from one sketch. Hautatutako elementuak ez dira soilik krokis bateko geometria. - + Number of selected objects is not 3 (is %1). Hautatutako objektuen kopurua ez da 3 (%1 da). - + Cannot create constraint with external geometry only!! Ezin da murrizketa sortu kanpo-geometria soilik erabiliz!! - + Incompatible geometry is selected! Bateragarria ez den geometria hautatu da! - + SnellsLaw on B-spline edge currently unsupported. Oraindik ez da onartzen Snell-en legea B-spline ertzean. - - + + Select at least one ellipse and one edge from the sketch. Hautatu elipse bat eta ertz bat, gutxienez, krokisean. - + Sketch axes cannot be used in internal alignment constraint Krokis-ardatzak ezin dira erabili barne-lerrokatzeko murrizketan - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Ezin duzu elipse bat barnetik beste elipse batekin murriztu. Hautatu elipse bakar bat. - - + + Maximum 2 points are supported. Gehienez 2 puntu onartzen dira. - - + + Maximum 2 lines are supported. Gehienez 2 lerro onartzen dira. - - + + Nothing to constrain Ez dago murrizteko ezer - + Currently all internal geometry of the ellipse is already exposed. Une honetan, elipsearen barne-geometria guztia agerian dago jadanik. - - - - + + + + Extra elements Elementu gehigarriak - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Behar direnak baino elementu gehiago hornitu dira emandako elipserako. Horiek ez ikusi egingo dira. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Ezin duzu elipse-arku bat barnetik beste elipse-arku batekin murriztu. Hautatu elipse-arku bakar bat. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Ezin duzu elipse bat barnetik elipse-arku batekin murriztu. Hautatu elipse edo elipse-arku bakar bat. - + Currently all internal geometry of the arc of ellipse is already exposed. Une honetan, elipse-arkuaren barne-geometria guztia agerian dago jadanik. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Behar direnak baino elementu gehiago hornitu dira emandako elipserako. Horiek ez ikusi egingo dira. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Une honetan barne-geometria elipseekin edo elipseen arkuekin soilik onartzen da. Hautatutako azken elementuak elipsea edo elipse baten arkua izan behar du. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Hautatu krokiseko murrizketa(k). - + CAD Kernel Error CAD kernel-errorea @@ -2941,42 +2941,42 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Kalkoak mendekotasun zirkularra sortuko luke. - + This object is in another document. Objektu hau beste dokumentu batean dago. - + This object belongs to another body. Hold Ctrl to allow cross-references. Objektu hau beste gorputz batena da. Mantendu Ctrl sakatuta erreferentzia gurutzatuak ahalbidetzeko. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Objektu hau beste gorputz batekoa da eta kanpo-geometria dauka. Erreferentzia gurutzatuak ez dira onartzen. - + This object belongs to another part. Objektu hau beste gorputz batena da. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Hautatutako krokisa ez da krokis honen paraleloa. Eutsi sakatu Ctrl+Alt paraleloak ez diren krokisak ahalbidetzeko. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Hautatutako krokisaren XY ardatzek ez dute kroskis honen norabide bera. Eutsi Ctrl+Alt hori ez ikusteko. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Hautatutako krokisaren jatorria ez dago lerrokatuta kroskis honen jatorriarekin. Eutsi Ctrl+Alt hori ez ikusteko. @@ -3062,8 +3062,8 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Txertatu erradioa - - + + Radius: Erradioa: @@ -3074,8 +3074,8 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Txertatu diametroa - - + + Diameter: Diametroa: @@ -3103,24 +3103,24 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Luzera: - - + + Change radius Aldatu erradioa - - + + Change diameter Aldatu diametroa - + Refractive index ratio Errefrakzio-indizea - + Ratio n2/n1: n2/n1 erlazioa: @@ -3136,22 +3136,22 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Hau estekatzeak mendekotasun zirkularra sortuko du. - + This object is in another document. Objektu hau beste dokumentu batean dago. - + This object belongs to another body, can't link. Objektu hau beste gorputz batena da, ezin da estekatu. - + This object belongs to another part, can't link. Objektu hau beste pieza batena da, ezin da estekatu. @@ -3192,8 +3192,8 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p SketcherGui::PropertyConstraintListItem - - + + Unnamed Izenik gabea @@ -3912,6 +3912,26 @@ Hala ere, ez da aurkitu amaiera-puntuei estekatutako murrizketarik.All constraints that deal with external geometry were deleted. Kanpo-geometriarekin zerikusia duten murrizketa guztiak ezabatu dira. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Krokisgilearen balidazioa - + Invalid constraints Baliogabeko murrizketak - - + + + Fix Konpondu - - + + + Find Aurkitu - + Delete constraints to external geom. Ezabatu kanpo-geometrien murrizketak - + Missing coincidences Falta diren bat etortzeak - + Tolerance: Tolerantzia: - + Highlight open vertexes Nabarmendu erpin irekiak - + Ignore construction geometry Ezikusi eraikuntza-geometria + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Alderantzizko kanpo-geometria - + Swap endpoints in constraints Trukatu amaiera-puntuak murrizketetan - + Constraint orientation locking Orientazio-blokearen murrizketa - + Enable/Update Gaitu/eguneratu - + Disable Desgaitu @@ -4329,104 +4356,104 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar SketcherGui::ViewProviderSketch - + Edit sketch Editatu krokisa - + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - + Do you want to close this dialog? Elkarrizketa-koadro hau itxi nahi duzu? - + Invalid sketch Baliogabeko krokisa - + Do you want to open the sketch validation tool? Krokisak balidatzeko tresna ireki nahi al duzu? - + The sketch is invalid and cannot be edited. Krokisa baliogabea da eta ezin da editatu. - + Please remove the following constraint: Kendu honako murrizketa: - + Please remove at least one of the following constraints: Kendu gutxienez honako murrizketetako bat: - + Please remove the following redundant constraint: Kendu erredundantea den honako murrizketa: - + Please remove the following redundant constraints: Kendu erredundanteak diren honako murriketak: - + Empty sketch Krokis hutsa - + Over-constrained sketch Gehiegi murriztutako krokisa - - - + + + (click to select) (klik hautatzeko) - + Sketch contains conflicting constraints Krokisak gatazkan dauden murrizketak ditu - + Sketch contains redundant constraints Krokisak murrizketa erredundanteak ditu - + Fully constrained sketch Osorik murriztutako krokisa - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Erabat mugatu gabeko krokisa <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 graduko</span></a> askatasunarekin - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Erabat mugatu gabeko krokisa <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graduko</span></a> askatasunarekin - + Solved in %1 sec %1 segundotan ebatzi da - + Unsolved (%1 sec) Ebatzi gabea (%1 seg) @@ -4515,8 +4542,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Finkatu zirkulu baten edo arku baten diametroa @@ -4524,8 +4551,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Finkatu zirkulu baten edo arku baten erradioa @@ -4542,8 +4569,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Sortu arku bat amaiera-puntuak eta arkuan dagoen puntu bat erabiliz @@ -4551,8 +4578,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Sortu zirkulu bat 3 ertz-puntutik abiatuz @@ -4560,8 +4587,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateArc - - + + Create an arc by its center and by its end points Sortu arku bat puntu zentrala eta amaiera-puntuak erabiliz @@ -4569,8 +4596,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Sortu elipse-arku bat puntu zentrala, erradio handia eta amaiera-puntuak erabiliz @@ -4578,8 +4605,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Sortu hiperbola-arku bat puntu zentrala, erradio handia eta amaiera-puntuak erabiliz @@ -4587,8 +4614,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Sortu parabola-arku bat fokua, erpina eta amaiera-puntuak erabiliz @@ -4596,13 +4623,13 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateBSpline - + B-spline by control points B-spline kontrol-puntuetatik - - + + Create a B-spline by control points Sortu B-spline bat kontrol-puntuetatik abiatuz @@ -4610,8 +4637,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Sortu zirkulu bat puntu zentrala eta ertz-puntu bat erabiliz @@ -4619,8 +4646,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Sortu elipse bat periapsia, apoapsia eta erradio txikia erabiliz @@ -4628,8 +4655,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Sortu elipse bat puntu zentrala, erradio handia eta puntu bat erabiliz @@ -4637,8 +4664,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Sortu heptagono bat bere erdigunea eta izkina bat erabiliz @@ -4646,8 +4673,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Sortu hexagono bat bere erdigunea eta izkina bat erabiliz @@ -4655,14 +4682,14 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Sortu oktogono bat bere erdigunea eta izkina bat erabiliz - - + + Create a regular polygon by its center and by one corner Sortu poligono erregular bat bere erdigunea eta izkina bat erabiliz @@ -4670,8 +4697,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Sortu pentagono bat bere erdigunea eta izkina bat erabiliz @@ -4679,8 +4706,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateSquare - - + + Create a square by its center and by one corner Sortu lauki bat bere erdigunea eta izkina bat erabiliz @@ -4688,8 +4715,8 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Sortu triangelu aldeberdin bat bere erdigunea eta izkina bat erabiliz @@ -4697,13 +4724,13 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periodikoa kontrol-puntuetatik - - + + Create a periodic B-spline by control points Sortu B-spline periodiko bat krokiseko kontrol-puntuetatik abiatuz diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm index bcb2b19cc1..f22282ff50 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 027a9b550b..056866e8cf 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Lunnostelija - + CarbonCopy Hiilikopio - + Copies the geometry of another sketch Kopioi toisen luonnoksen geometrian @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Lunnostelija - + Constrain arc or circle Rajoita ympyrän kaari - + Constrain an arc or a circle Rajoita ympyrän kaari - + Constrain radius Rajoita säde - + Constrain diameter Rajoita halkaisija @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Lunnostelija - + Create arc Luo kaari - + Create an arc in the sketcher Luo kaari luonnostyökalulla - + Center and end points Keski- ja loppupisteet - + End points and rim point Loppupisteet ja kehän kohta @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Lunnostelija - + Create a B-spline Luo B-käyrä - + Create a B-spline in the sketch Luo B-käyrä luonnokseen @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Lunnostelija - + Create circle Luo ympyrä - + Create a circle in the sketcher Luo ympyrä luonnostyökalulla - + Center and rim point keskipiste ja kehäpiste - + 3 rim points 3 kehän pistettä @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Lunnostelija - + Create a conic Luo kartio - + Create a conic in the sketch Luo kartio luonnokseen - + Ellipse by center, major radius, point Ellipsi keskipisteellä, pääsäteellä tai pisteellä - + Ellipse by Periapsis, apoapsis, minor radius Ellipsi kauimmalla pisteellä, lähimmällä pisteellä tai pienellä säteellä - + Arc of ellipse by center, major radius, endpoints Ellipsin kaari keskipisteellä, suurella säteellä, päätepisteillä - + Arc of hyperbola by center, major radius, endpoints Hyperbelin kaari keskipisteen, isoakselin säteen ja päätepisteiden perusteella - + Arc of parabola by focus, vertex, endpoints Paraabelin kaari polttopisteen, huipun ja päätepisteiden perusteella @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Lunnostelija - + Create regular polygon Luo säännöllinen monikulmio - + Create a regular polygon in the sketcher Luo säännöllinen monikulmio luonnokseen - + Triangle Kolmio - + Square Neliö - + Pentagon Viisikulmio - + Hexagon Kuusikulmio - + Heptagon Seitsenkulmio - + Octagon Kahdeksankulmio - + Regular Polygon Säännöllinen monikulmio @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Lunnostelija - + Constrain angle Rajoita kulma - + Fix the angle of a line or the angle between two lines Korjaa viivan kulmaa tai kahden viivan välistä kulma @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Lunnostelija - + Constrain Block Rajoita lukituksella - + Create a Block constraint on the selected item Luo lukitusrajoitus valittulle kohteelle @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Lunnostelija - + Constrain coincident Samanlaisuus rajoite - + Create a coincident constraint on the selected item Luo samanlainen rajoite valituille kohteille @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Lunnostelija - + Constrain diameter Rajoita halkaisija - + Fix the diameter of a circle or an arc Kiinnitä ympyrän tai kaaren halkaisija @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Lunnostelija - + Constrain distance Etäisyys rajoitus - + Fix a length of a line or the distance between a line and a vertex Korjaa viivan pituutta tai etäisyyttä viivan ja pisteen välillä @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Lunnostelija - + Constrain horizontal distance Vaakasuoran etäisyyden rajoite - + Fix the horizontal distance between two points or line ends Korjaa kahden pisteen tai viivanpään vaakasuoraa etäisyyttä @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Lunnostelija - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Korjaa kahden pisteen tai viivanpään pystysuoraa etäisyyttä @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Lunnostelija - + Constrain equal Yhtäsuuruus rajoite - + Create an equality constraint between two lines or between circles and arcs Luo yhtäsuuruus rajoite kahdelle viivan tai ympyröiden ja kaarien väliin @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Lunnostelija - + Constrain horizontally Vaakasuora rajoite - + Create a horizontal constraint on the selected item Luo vaakasuora rajoite valittujen osien välille @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Lunnostelija - + Constrain InternalAlignment Rajoita SisäinenTasaus - + Constrains an element to be aligned with the internal geometry of another element Rajoitus: kohde tasataan toisen kohteen sisäisen geometrian kanssa @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Lunnostelija - + Constrain lock Rajoite lukko - + Create a lock constraint on the selected item Luo lukittu rajoite valituille kohteille @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Lunnostelija - + Constrain parallel Rajoita yhdensuuntaiseksi - + Create a parallel constraint between two lines Luo rinnakkaisuus rajoite kahden viivan välille @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Lunnostelija - + Constrain perpendicular Rajoita kohtisuorasti - + Create a perpendicular constraint between two lines Luo kohtisuora rajoitus kahden viivan väliin @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Lunnostelija - + Constrain point onto object Rajoita piste objektiin - + Fix a point onto an object Korjaa piste objektin paalle @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Lunnostelija - + Constrain radius Rajoita säde - + Fix the radius of a circle or an arc Korjaa ympyrän tai kaaren sädettä @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Lunnostelija - + Constrain refraction (Snell's law') Rajoita taittuminen (Snellin laki) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Luo taittumislaki (Snellin laki) Rajoitus säteiden kahden päätepisteen kanssa ja liitäntänä on reuna. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Lunnostelija - + Constrain symmetrical Rajoita symmetrisesti - + Create a symmetry constraint between two points with respect to a line or a third point Luo symmetrinen rajoite kahden pisteen väliin suhteessa viivaan tai kolmanteen pisteeseen @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Lunnostelija - + Constrain tangent Rajoita tangentti - + Create a tangent constraint between two entities Luo tangenttirajoite kahden yksikön välillä @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Lunnostelija - + Constrain vertically Rajoita pystysuuntaisesti - + Create a vertical constraint on the selected item Luo pystysuora rajoite valitulle kohteelle @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Lunnostelija - + Create arc by three points Luo kaari kolmella pistettä - + Create an arc by its end points and a point along the arc Luoda kaari sen loppupisteistä ja kaarella olevasta pisteestä @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Lunnostelija - + Create circle by three points Luo ympyrä kolmella pistettä - + Create a circle by 3 perimeter points Luo ympyrä kolmella kehän pisteellä @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Lunnostelija - + Create arc by center Luo kaari keskipistettä - + Create an arc by its center and by its end points Luo kaari sen keskipisteellä ja sen loppupisteillä @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Lunnostelija - + Create an arc of ellipse Luo ellipsin kaari - + Create an arc of ellipse in the sketch Luo ellipsin kaaren luonnoksessa @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Lunnostelija - + Create an arc of hyperbola Luo hyperbelin kaari - + Create an arc of hyperbola in the sketch Luo hyperbelin kaari luonnokseen @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Lunnostelija - + Create an arc of parabola Luo paraabelin kaari - + Create an arc of parabola in the sketch Lue paraabelin kaari luonnokseen @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Lunnostelija - + Create B-spline Luo B-käyrä - + Create a B-spline via control points in the sketch. Luo B-käyrä luonnokseen ohjauspisteiden avulla. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Lunnostelija - + Create circle Luo ympyrä - + Create a circle in the sketch Luo ympyrän luonnoksessa @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Lunnostelija - + Create draft line Luo vedosviiva - + Create a draft line in the sketch Luo vedosviiva luonnokseen @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Lunnostelija - + Create ellipse by 3 points Luo ellipsi 3:lla pisteellä - + Create an ellipse by 3 points in the sketch Luo ellipsi 3 pisteellä luonnoksessa @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Lunnostelija - + Create ellipse by center Luo ellipsi keskipisteen avulla - + Create an ellipse by center in the sketch Luo ellipsi keskipisteen avulla luonnoksessa @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Lunnostelija - + Create fillet Luo pyöristys - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Lunnostelija - + Create heptagon Luo seitsenkulmio - + Create a heptagon in the sketch Luo seitsenkulmio luonnoksessa @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Lunnostelija - + Create hexagon Luo kuusikulmio - + Create a hexagon in the sketch Luo kuusikulmio luonnoksessa @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Lunnostelija - + Create line Luo viiva - + Create a line in the sketch Luo viiva luonnoksessa @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Lunnostelija - + Create octagon Luo kahdeksankulmio - + Create an octagon in the sketch Luo kahdeksankulmio luonnoksessa @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Lunnostelija - + Create pentagon Luo viisikulmio - + Create a pentagon in the sketch Luo viisikulmio luonnoksessa @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Lunnostelija - + Create periodic B-spline Luo säännöllinen B-käyrä - + Create a periodic B-spline via control points in the sketch. Luo säännöllinen B-käyrä luonnokseen ohjauspisteiden avulla. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Lunnostelija - + Create point Luo piste - + Create a point in the sketch Luo pisteen luonnoksessa @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Lunnostelija - + Create polyline Luo murtoviiva - + Create a polyline in the sketch. 'M' Key cycles behaviour Luo murtoviivan luonnos. 'M' avain ohjaa käyttäytymistä @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Lunnostelija - + Create rectangle Luo suorakolmio - + Create a rectangle in the sketch Luo suorakulmion luonnoksessa @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Lunnostelija - + Create regular polygon Luo säännöllinen monikulmio - + Create a regular polygon in the sketch Luo säännöllinen monikulmio luonnokseen @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Lunnostelija - + Create slot Luo rako - + Create a slot in the sketch Luo rako luonnokseen @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Lunnostelija - + Create square Luo neliö - + Create a square in the sketch Luo neliö luonnoksessa @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Lunnostelija - + Create text Luo tekstiä - + Create text in the sketch Luo teksti luonnokseen @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Lunnostelija - + Create equilateral triangle Luo tasasivuinen kolmio - + Create an equilateral triangle in the sketch Luo tasasivuinen kolmio luonnoksessa @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Lunnostelija - + Extend edge Pidennä reunaa - + Extend an edge with respect to the picked position Pidennä reunaa valittuun sijaintiin asti @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Lunnostelija - + External geometry Ulkoinen geometria - + Create an edge linked to an external geometry Luo reuna joka on yhteydessä ulkoiseen geometriaan @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Lunnostelija - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Lunnostelija - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Lunnostelija - + Trim edge Trimmaa reuna - + Trim an edge with respect to the picked position Tarkenna reuna suhteessa valittuun kohtaan @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Valitse reuna(t) sketsistä. - - - - + + + + Dimensional constraint Mittarajoite @@ -2232,273 +2232,273 @@ Yksi valituista on oltava sketsi - - + + Select an edge from the sketch. Valitse luonnoksen reuna. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Mahdoton rajoite - - - - + + + + The selected edge is not a line segment Valittu reuna ei ole viivasegmentillä - - - - - - + + + + + + Double constraint Kaksinkertainen rajoite - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Valitut kohteet eivät voi hyväksyä vaakasuoraa rajoitetta! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Valitut kohteet eivät voi hyväksyä pystysuoraa rajoitetta! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Virhe - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Valitse vähintään kaksi kärkipistettä luonnoksesta. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Valitse pisteet luonnoksesta. - - + + Select exactly one line or one point and one line or two points from the sketch. Valitse täsmälleen yksi viiva tai yksi piste ja yksi viiva tai kaksi pistettä sketsistä. - + Cannot add a length constraint on an axis! Akselille ei voida lisätä pituusrajoitetta! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Valitse täsmälleen yksi viiva tai enintään kaksi pistettä sketsistä. - + Cannot add a horizontal length constraint on an axis! Akselille ei voida lisätä vaakasuoraa pituusrajoitetta! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Akselille ei voida lisätä vaakapituusrajoitetta! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Valitse kaksi tai useampi viiva sketsistä. - - + + Select at least two lines from the sketch. Valitse vähintään kaksi viivaa sketsistä. - + Select a valid line Valitse kelvollinen viiva - - + + The selected edge is not a valid line Valittu reuna ei ole kelvollinen viiva - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päätepistettä; kaksi käyrää ja piste. - + Select some geometry from the sketch. perpendicular constraint Valitse jokin geometria luonnoksesta. - + Wrong number of selected objects! perpendicular constraint Väärä lukumäärä valittuja kohteita! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3 kohteella on oltava 2 käyrää ja 1 piste. - - + + Cannot add a perpendicularity constraint at an unconnected point! Yhdistämättömille pisteille ei voida lisätä samansuuntausuusrajoitetta! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. Yhden valituista reunoista pitäisi olla viiva. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Valitse jokin geometria luonnoksesta. - + Wrong number of selected objects! tangent constraint Väärä lukumäärä valittuja kohteita! - - - + + + Cannot add a tangency constraint at an unconnected point! Yhdistämättömään pisteeseen ei voi lisätä samansuuntaisuusrajoitetta! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Valitse yksi tai userampia kaaria tai ympyröitä luonnoksesta. - - + + Constrain equal Yhtäsuuruus rajoite - + Do you want to share the same radius for all selected elements? Haluat jakaa saman säteen kaikissa valituissa osissa? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Valitse yksi tai useampi viiva luonnoksesta. Tai valitse kaksi reunaa ja piste. - - + + Parallel lines Samansuuntaiset viivat - - + + An angle constraint cannot be set for two parallel lines. Kulma-rajoitusta ei voi määrittää kahdelle samansuuntaiselle viivalle. - + Cannot add an angle constraint on an axis! Akseliin ei voi lisätä kulmarajoitetta! - + Select two edges from the sketch. Valitse kaksi reunaa sketsistä. - - + + Select two or more compatible edges Valitse yksi tai useampi yhteensopiva reuna - + Sketch axes cannot be used in equality constraints Luonnoksen akseleita ei voida käyttää yhtäsuuruusrajoitteina - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Valitse yksi tai useampi samantyyppinen reuna - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Valitse kaksi pistettä ja symmetria linja, kaksi pistettä ja symmetria kohta, tai linja ja symmetriakohta luonnoksesta. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Viivan ja sen päätepisteiden välille ei voi lisätä symmetriarajoitetta! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Valitse kaksi viivojen päätepistettä säteinä toimimaan sekä reuna kuvaamaan rajaa. Ensimmäinen valittu piste vastaa indeksiä n1, toinen - n2 ja viitearvo määrittää suhteen n2/n1. - + Selected objects are not just geometry from one sketch. Valitut kohteet eivät ole vain yhden luonnoksen geometriaa. - + Number of selected objects is not 3 (is %1). Valittuja kohteita ei ole 3 (on %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Sopimaton geometria on valittu! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Valitse vähintään yksi ellipsi ja yksi reuna luonnoksesta. - + Sketch axes cannot be used in internal alignment constraint Luonnoksen akseleita ei voi käyttää sisäisen tasauksen rajoitteessa - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Enintään 2 pistettä ovat tuettuja. - - + + Maximum 2 lines are supported. Enintään 2 viivaa ovat tuettuja. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Tällä hetkellä kaikki ellipsin sisäinen geometria on jo paljastettu. - - - - + + + + Extra elements Ylimääräisiä osia - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Enemmän osia kuin on mahdollista annettuun määriteltyyn ellipsiin. Nämä jätettiin huomiotta. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Tällä hetkellä kaikki ellipsin kaaren sisäinen geometria on jo paljastettu. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Enemmän osia kuin on mahdollista annettuun määriteltyyn ellipsin kaareen. Nämä jätettiin huomiotta. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Tällä hetkellä sisäinen geometria tuetaan vain ellipsille tai ellipsin kaarelle. Viimeksi valitun osan on oltava ellipsi tai ellipsin kaari. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select constraint(s) from the sketch. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aseta säde - - + + Radius: Säde: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Halkaisija: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Pituus: - - + + Change radius Vaihda sädettä - - + + Change diameter Change diameter - + Refractive index ratio Taitekerroin suhdeluku - + Ratio n2/n1: Suhde n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Nimetön @@ -3912,6 +3912,26 @@ Kuitenkaan ei ole löytynyt rajoitteita, jotka liittyisivät päätepisteisiin.< All constraints that deal with external geometry were deleted. Kaikki ulkoista geometriaa koskevat rajoitteet poistettiin. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Luönnostyökalun kokeilu ja kelpuutus - + Invalid constraints Epäkelpoja rajoituksia - - + + + Fix Korjaa - - + + + Find Etsi - + Delete constraints to external geom. Poista rajoitteet ulkoiseen geometriaan. - + Missing coincidences Puuttuvat yhteensattumia - + Tolerance: Toleranssi: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Käänteinen ulkoinen geometria - + Swap endpoints in constraints Vaihda keskenään päätepisteiden rajoitteet - + Constraint orientation locking rajoitteen suunnan lukitus - + Enable/Update Käytä/Päivitä - + Disable Ota pois käytöstä @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Muokkaa luonnosta - + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? - + Invalid sketch Virheellinen luonnos - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Poista seuraava rajoite: - + Please remove at least one of the following constraints: Poista ainakin yksi seuraavista rajoitteista: - + Please remove the following redundant constraint: Poista seuraava turha rajoite: - + Please remove the following redundant constraints: Poista seuraavat turhat rajoitteet: - + Empty sketch Tyhjä luonnos - + Over-constrained sketch Liian rajoitettu luonnos - - - + + + (click to select) (Valitse napsauttamalla) - + Sketch contains conflicting constraints Luonnos sisältää ristiriitaisia rajoituksIa - + Sketch contains redundant constraints Luonnos sisältää tarpeettomia rajoituksia - + Fully constrained sketch Täysin rajoitettu luonnos - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Ratkaistu %1 sekunnissa - + Unsolved (%1 sec) Ratkaisematta (%1 sekuntia) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Kiinnitä ympyrän tai kaaren halkaisija @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Korjaa ympyrän tai kaaren sädettä @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Luoda kaari sen loppupisteistä ja kaarella olevasta pisteestä @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Luo ympyrä kehän 3:sta pisteestä @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Luo kaari sen keskipisteellä ja sen loppupisteillä @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Luo ellipsin kaari keskipisteellä, suurella säteellä, päätepisteillä @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Luoda ympyrä sen keskipisteellä ja kehän pisteellä @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Luo ellipsi kauimmalla pisteellä, lähimmällä pisteellä ja pienellä säteellä @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Luo ellipsi keskipisteellä, suurella säteellä ja pisteellä @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Luo seitsenkulmio keskipisteellä ja yhdellä kulmalla @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Luo kuusikulmio keskipisteellä ja yhdellä kulmalla @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Luo kahdeksankulmio keskipisteellä ja yhdellä kulmalla - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Luo viisikulmio keskipisteellä ja yhdellä kulmalla @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Luo neliö keskipisteellä ja yhdellä kulmalla @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Luo tasasivuinen kolmio keskipisteellä ja yhdellä kulmalla @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm index 7fa213046b..e4eb04f6db 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts index df161f3cf4..e4f62eb805 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Kinopyang carbon - + Copies the geometry of another sketch Kinokopya ang Heometría ng ibang disenyo @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Constrain Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Gumawa ng isang arko sa disenyo - + Center and end points Sentro at mga punto ng pagtatapos - + End points and rim point Mga punto ng pagtatapos at rim point @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Gumawa ng isang B-spline - + Create a B-spline in the sketch Gumawa ng isang B-spline sa disenyo @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Gumawa ng bilog - + Create a circle in the sketcher Lumalang ng isang bilog sa sketcher - + Center and rim point Sentro at tabí dulo - + 3 rim points 3 rim puntos @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Lumikha ng isang korteng kono - + Create a conic in the sketch Lumikha ng isang conic sa anyo - + Ellipse by center, major radius, point Ellipse sa pamamagitan ng sentro, pangunahing radius, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse ng Periapsis, apoapsis, menor de edad radius - + Arc of ellipse by center, major radius, endpoints Arc ng tambilugan sa pamamagitan ng sentro, pangunahing radius, endpoints - + Arc of hyperbola by center, major radius, endpoints Arc ng hyperbola sa gitna, pangunahing radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arko ng parabola sa pamamagitan ng focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Gumawa ng regular polygon - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Tatlong pánulukan - + Square Kuwadrado - + Pentagon Pentagon - + Hexagon Hexagon - + Heptagon Heptagon - + Octagon Octagon - + Regular Polygon Karaniwang Poligon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Constrain angle - + Fix the angle of a line or the angle between two lines I-ayos ang anggulo ng isang guhit o anggulo sa pagitan ng dalawang linya @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Pigilan ang Pagharang - + Create a Block constraint on the selected item Lumikha ng Pagpigil sa Harang sa napiling aytem @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Constrain coincidents - + Create a coincident constraint on the selected item Gumawa ng magkakatulad na pagpilit sa piniling item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Limitahan ang layo - + Fix a length of a line or the distance between a line and a vertex Ayusin ang isang haba ng isang guhit o ang distansya sa pagitan ng isang linya at isang vertex @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Ayusin ang pahalang distansya sa pagitan ng dalawang puntos o guhit ay nagtatapos @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Ayusin ang patindig na distansya sa pagitan ng dalawang puntos o linya ay nagtatapos @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Limitahan ang pagkakapareho - + Create an equality constraint between two lines or between circles and arcs Gumawa ng isang pagpigil sa pagkakapantay-pantay sa pagitan ng dalawang linya o sa pagitan ng mga lupon at mga arko @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Constrain horizontally - + Create a horizontal constraint on the selected item Gumawa ng pahalang na pagpilit sa piniling item @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Ang isang elemento ay nakahanay sa panloob na geometry ng isa pang elemento @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Constrain lock - + Create a lock constraint on the selected item Gumawa ng kandado na pagpilit sa napiling item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Constrain parallel - + Create a parallel constraint between two lines Lumikha ng parallel pagpilit sa pagitan ng dalawang linya @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Constrain perpendicular - + Create a perpendicular constraint between two lines Gumawa ng perpendikular na pagpilit sa pagitan ng dalawang linya @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Constrain point papunta sa object - + Fix a point onto an object Ayusin ang isang punto papunta sa isang bagay @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Constrain Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog - + Fix the radius of a circle or an arc Ayusin ang radius ng isang bilog o isang arko @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrain paglilihid o pag lilisya (Snell's law ') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Gumawa ng isang batas sa repraksyon (batas ng Snell) sa pagitan ng dalawang dulo ng ray at isang gilid bilang isang interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Pagpigil ng simetrikal - + Create a symmetry constraint between two points with respect to a line or a third point Gumawa ng isang simetrya pagpilit sa pagitan ng dalawang puntos na may paggalang sa isang linya o isang ikatlong punto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Umampat ng nahahawakan - + Create a tangent constraint between two entities Gumawa ng tangen na pagpilit sa pagitan ng dalawang entidad @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Patayo nang patayo - + Create a vertical constraint on the selected item Lumikha ng patindig na pagpilit sa piniling item @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Lumikha ng arko sa pamamagitan ng tatlong puntos - + Create an arc by its end points and a point along the arc Gumawa ng isang arko sa pamamagitan ng mga punto ng pagtatapos nito at isang punto kasama ang arko @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Lumikha ng lupon sa pamamagitan ng tatlong puntos - + Create a circle by 3 perimeter points Lumikha ng isang bilog sa pamamagitan ng 3 mga puntos ng perimeter @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Lumikha ng arc sa pamamagitan ng sentro - + Create an arc by its center and by its end points Gumawa ng isang arko sa pamamagitan ng sentro nito at sa pamamagitan ng mga punto ng pagtatapos nito @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Lumikha ng isang arko ng tambilugan - + Create an arc of ellipse in the sketch Gumawa ng isang arko ng tambilugan sa sketch @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Gumawa ng isang arko ng hyperbola - + Create an arc of hyperbola in the sketch Gumawa ng isang arko ng hyperbola sa disenyo @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Gumawa ng arko ng parabola - + Create an arc of parabola in the sketch Lumikha ng isang arko ng parabola sa disenyo @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Lumikha ng B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Gumawa ng bilog - + Create a circle in the sketch Gumawa ng isang bilog sa sketch @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Lumikha ng linya ng draft - + Create a draft line in the sketch Lumikha ng draft line sa disenyo @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Lumikha ng tambilugan sa pamamagitan ng 3 puntos - + Create an ellipse by 3 points in the sketch Gumawa ng isang tambilugan sa pamamagitan ng 3 puntos sa disenyo @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Lumikha ng tambilugan sa pamamagitan ng sentro - + Create an ellipse by center in the sketch Lumikha ng isang tambilugan sa pamamagitan ng gitna sa disenyo @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Lumikha ng fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Gumawa ng heptagon - + Create a heptagon in the sketch Gumawa ng isang heptagon sa plano @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Gumawa ng hexagon - + Create a hexagon in the sketch Lumikha ng hexagon sa isang skets @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Gumawa ng linya - + Create a line in the sketch Lumikha ng isang linya sa sketch @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Lumikha ng octagon - + Create an octagon in the sketch Gumawa ng isang octagon sa plano @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Lumikha ng pentagon - + Create a pentagon in the sketch Lumikha ng isang pentagon sa sketch @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Lumikha ng panaka-nakang B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Lumikha ng punto - + Create a point in the sketch Lumikha ng isang punto sa sketch @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Lumikha ng polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour Gumawa ng polyline sa sketch. Pag-uugali ng 'M' Key cycles @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Lumikha ng parihaba - + Create a rectangle in the sketch Lumikha ng isang parihaba sa sketch @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Gumawa ng regular polygon - + Create a regular polygon in the sketch Lumikha ng karaniwang poligon sa banghay @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Lumikha ng slot - + Create a slot in the sketch Gumawa ng slot sa sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Lumikha ng parisukat - + Create a square in the sketch Lumikha ng isang parisukat sa sketch @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Lumikha ng teksto - + Create text in the sketch Lumikha ng teksto sa sketch @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Lumikha ng equilateral triangle - + Create an equilateral triangle in the sketch Lumikha ng equilateral tatsulok sa disenyo @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Palawigin ang gilid - + Extend an edge with respect to the picked position Palawakin ang isang gilid na may paggalang sa piniling posisyon @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Panlabas na geometry - + Create an edge linked to an external geometry Gumawa ng gilid na naka-link sa isang panlabas na Heometría @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint I-toggle ang reference/pagpigil sa pagmamaneho - + Toggles the toolbar or selected constraints to/from reference mode Mga toggle sa toolbar o napiling mga hadlang sa/mula sa anyo ng sanggunian @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge I-trim ang gilid - + Trim an edge with respect to the picked position Bawasan ang isang gilid na may kinalaman sa piniling posisyon @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Humihiling ka ng walang pagbabago sa pagkarami-rami ng pinagdahunan. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Ang index ng natuklod ay wala sa hangganan. Tandaan na alinsunod sa notasyon ng OCC, ang unang buhol ay may index 1 at hindi zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Ang pagkarami-rami ay hindi maaaring mabawasan ng lampas sa zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. Ang OCC ay hindi maaaring bawasan ang maraming iba't ibang uri sa loob ng maximum na tolerasyon. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Pumili ng mga gilid(s) mula sa sketch. - - - - + + + + Dimensional constraint Sukat na pagpilit @@ -2232,273 +2232,273 @@ Ang isa sa mga napili ay kailangang nasa disenyo - - + + Select an edge from the sketch. Pumili ng isang gilid mula sa sketch. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Imposibleng pagpilit - - - - + + + + The selected edge is not a line segment Ang piniling hangganan ay hindi isang line segment - - - - - - + + + + + + Double constraint Dobleng pagpilit - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Ang (mga) napiling item ay hindi maaaring tumanggap ng pahalang na pagpilit! - + There are more than one fixed point selected. Select a maximum of one fixed point! Mayroong higit sa isang nakapirming punto na napili. Pumili ng isang pinakamataas sa isang nakapirming punto! - + The selected item(s) can't accept a vertical constraint! Ang (mga) napiling item ay hindi maaaring tumanggap ng vertical na pagpilit! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Pumili ng mga vertex mula sa disenyo. - + Select one vertex from the sketch other than the origin. Pumili ng isang vertex mula sa disenyo maliban sa pinanggalingan. - + Select only vertices from the sketch. The last selected vertex may be the origin. Pumili lamang ng mga vertex mula sa plano. Ang huling napiling vertex ay maaaring ang pinagmulan. - + Wrong solver status Maling katayuan ng tagalutas - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Pumili ng isang gilid batay sa disenyo. - + Select only edges from the sketch. Pumili lamang ng mga gilid batay sa disenyo. - - - - - - - + + + + + + + Error Kamalian - + Select two or more points from the sketch. Pumili ng dalawa o higit pang mga puntos mula sa disenyo. - - + + Select two or more vertexes from the sketch. Pumili ng dalawa o higit pang mga vertex mula sa disenyo. - - + + Constraint Substitution Pagpapalit sa Harang - + Endpoint to endpoint tangency was applied instead. Ang Endpoint sa Endpoint na ugnayan ang nailapat. - + Select vertexes from the sketch. Pumili ng mga vertex mula sa disenyo. - - + + Select exactly one line or one point and one line or two points from the sketch. Piliin ang eksaktong isang guhit o isang punto at isang guhit o dalawang puntos mula sa disenyo. - + Cannot add a length constraint on an axis! Hindi maaaring magdagdag ng isang haba pagpilit sa isang axis! - + This constraint does not make sense for non-linear curves Ang pagpigil na ito ay walang kahulugan para sa mga di-linear curves - - - - - - + + + + + + Select the right things from the sketch. Piliin ang mga tamang bagay mula sa disenyo. - - + + Point on B-spline edge currently unsupported. Ituro ang hangganan ng B-spline na kasalukuyang hindi sinusuportahan. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Wala sa mga piniling dulo ang nilimitahan sa kani-kanilang mga kurba, alinman dahil ang mga ito ay mga bahagi ng parehong elemento, o dahil sila ay parehong panlabas na Heometría. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Piliin ang alinman sa isang punto at ilang mga curve, o isang curve at ilang mga puntos. Pinili mo ang %1 curves at %2 puntos. - - - - + + + + Select exactly one line or up to two points from the sketch. Piliin ang eksaktong isang linya o hanggang sa dalawang puntos mula sa disenyo. - + Cannot add a horizontal length constraint on an axis! Hindi maaaring magdagdag ng pahalang na haba ng pagpilit sa isang aksis! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Ang pagpigil lamang ay may katuturan sa isang line segment o isang pares ng mga puntos - + Cannot add a vertical length constraint on an axis! Hindi maaaring magdagdag ng patindig na haba constraint sa isang axis! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Pumili ng dalawa o higit pang mga guhit mula sa disenyo. - - + + Select at least two lines from the sketch. Pumili ng hindi bababa sa dalawang linya mula sa disenyo. - + Select a valid line Pumili ng isang valid na linya - - + + The selected edge is not a valid line Ang piniling gilid ay hindi wastong guhit - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Mga tinanggap na kumbinasyon: dalawang kurva; isang pangwakas na dulo at isang kurba; dalawang dulo; dalawang kurva at isang punto. - + Select some geometry from the sketch. perpendicular constraint Pumili ng ilang Heometría mula sa plano. - + Wrong number of selected objects! perpendicular constraint Maling bilang ng mga napiling anyo! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint May 3 bagay, kailangang mayroong 2 kurba at 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Hindi maidaragdag ang pagpilit ng perpendicularity sa isang hindi nakakaalam na punto! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendikular sa B-spline hangganan na kasalukuyang hindi sinusuportahan. - - + + One of the selected edges should be a line. Ang isa sa mga napiling dulo ay dapat na isang guhit. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dalawang dulo; dalawang kurva at isang punto. - + Select some geometry from the sketch. tangent constraint Pumili ng ilang Heometría mula sa plano. - + Wrong number of selected objects! tangent constraint Maling bilang ng mga napiling anyo! - - - + + + Cannot add a tangency constraint at an unconnected point! Hindi mangyayaring magdagdag ng isang pagpilit tangency sa isang hindi nakakaalam na punto! - - - + + + Tangency to B-spline edge currently unsupported. Tangency sa B-spline hangganan ng kasalukuyang hindi suportadong. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Ang Endpoint sa Endpoint na ugnayan ay inilapat na. Ang hindi inaasahang harang ay natanggal na. - - - - + + + + Select one or more arcs or circles from the sketch. Pumili ng isa o higit pang mga arko o mga lupon mula sa disenyo. - - + + Constrain equal Limitahan ang pagkakapareho - + Do you want to share the same radius for all selected elements? Gusto mo bang ibahagi ang parehong radius para sa lahat ng napiling elemento? - - + + Constraint only applies to arcs or circles. Nalalapat lamang ang pagpipigil sa mga arko o lupon. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Pumili ng isa o dalawang guhit mula sa plano. O pumili ng dalawang gilid at punto. - - + + Parallel lines Mga parallel na linya - - + + An angle constraint cannot be set for two parallel lines. Ang isang pagpilit ng anggulo ay hindi maaaring itakda para sa dalawang parallel na linya. - + Cannot add an angle constraint on an axis! Hindi mangyayaring magdagdag ng anggulo sa pagpilit sa isang axis! - + Select two edges from the sketch. Pumili ng dalawang hangganan mula sa disenyo. - - + + Select two or more compatible edges Pumili ng dalawa o higit pang mga katugmang mga hangganan - + Sketch axes cannot be used in equality constraints Ang mga disenyo axes ay hindi maaaring gamitin sa mga limitasyon ng pagkakapantay-pantay - + Equality for B-spline edge currently unsupported. Ang pagkakapantay-pantay para sa B-spline baybayin kasalukuyang ay hindi sinusuportahan. - - + + Select two or more edges of similar type Pumili ng dalawa o higit pang mga baybayin ng magkatulad na uri - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Pumili ng dalawang puntos at isang mahusay na proporsyon linya, dalawang puntos at isang mahusay na proporsyon point o isang linya at isang mahusay na proporsyon point mula sa sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Hindi maaaring magdagdag ng isang magaling na pagpapasiya sa pagitan ng isang guhit at mga punto ng pagtatapos nito! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Pumili ng dalawang dulo ng guhit upang kumilos bilang ray, at isang gilid na kumakatawan sa isang hangganan. Ang unang napiling punto ay tumutugma sa index n1, pangalawa - hanggang sa n2, at ang datum na halaga ay nagtatakda ng ratio n2/n1. - + Selected objects are not just geometry from one sketch. Ang mga napiling bagay ay hindi lamang Heometría mula sa isang disenyo. - + Number of selected objects is not 3 (is %1). Ang bilang ng mga hinirang na bagay ay hindi 3 (ay %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Ang hindi tugmang geometry ay napili! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw sa B-spline hangganan ay kasalukuyang hindi sinusuportahan. - - + + Select at least one ellipse and one edge from the sketch. Pumili ng hindi bababa sa isang ellipse at isang gilid mula sa sketch. - + Sketch axes cannot be used in internal alignment constraint Hindi maaaring magamit ang disenyong axes sa pagpilit ng panloob na pagkakahanay - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Ang pinakamataas na 2 puntos ay sinusuportahan. - - + + Maximum 2 lines are supported. Ang pinakamataas na 2 linya ay suportado. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Sa kasalukuyan ang lahat ng panloob na Heometría ng tambilugan ay nakalantad na. - - - - + + + + Extra elements Mga dagdag na pasimulang aral - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Ang mas maraming elemento kaysa posible para sa ibinigay na tambilugan ay ibinigay. Ang mga ito ay hindi pinansin. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Sa kasalukuyan ang lahat ng panloob na Heometría ng arko ng tambilugan ay nalantad na. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Higit pang mga elemento kaysa posible para sa ibinigay na arko ng tambilugan ay ibinigay. Ang mga ito ay hindi pinansin. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Ang kasalukuyang panloob na Heometría ay sinusuportahan lamang para sa ellipse o arko ng ellipse. Ang huling piniling elemento ay dapat na isang tambilugan o isang arko ng tambilugan. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Piliin ang (mga) hadlang mula sa disenyo. - + CAD Kernel Error Kamalian sa CAD Kernel @@ -2941,42 +2941,42 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Ang kopya ng carbon ay magdudulot ng isang circular dependency. - + This object is in another document. Ang layon na ito ay nasa isa pang dokumento. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Ang adhika na ito ay kabilang sa ibang bahagi. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Ang XY axes ng piniling disenyo ay walang katulad na direksyon tulad ng disenyo na ito. Pindutin nang matagal ang Ctrl+Alt upang balewalain ito. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Ang pinanggalingan ng napiling disenyo ay hindi nakahanay sa pinagmulan ng disenyo na ito. Pindutin nang matagal ang Ctrl+Alt upang balewalain ito. @@ -3062,8 +3062,8 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Magpasok ng radius - - + + Radius: Radius: @@ -3074,8 +3074,8 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Insert diameter - - + + Diameter: Diyametro: @@ -3103,24 +3103,24 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Length: - - + + Change radius Palitan ang radius - - + + Change diameter Change diameter - + Refractive index ratio Ratio ng repraktibong index - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Ang pag-uugnay na ito ay magdudulot ng pag-ikot ng dependency. - + This object is in another document. Ang layon na ito ay nasa isa pang dokumento. - + This object belongs to another body, can't link. Ang bagay na ito ay pag-aari ng ibang katawan, ay hindi maaaring mag-uugnay. - + This object belongs to another part, can't link. Ang pakay na ito ay kabilang sa ibang bahagi, ay hindi maaaring mag-link. @@ -3192,8 +3192,8 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal SketcherGui::PropertyConstraintListItem - - + + Unnamed Walang pangalan @@ -3912,6 +3912,26 @@ Gayunpaman, natagpuan ang walang hadlang na nag-uugnay sa mga endpoint.All constraints that deal with external geometry were deleted. Ang lahat ng mga limitasyon na nakikitungo sa panlabas na geometry ay tinanggal. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Pagpapatunay ng sketcher - + Invalid constraints Hindi valid na pagpilit - - + + + Fix Ayusin - - + + + Find Hanapin - + Delete constraints to external geom. Tanggalin ang mga hadlang sa panlabas na geom. - + Missing coincidences Nawawalang mga nagkataon - + Tolerance: Pahintulot: - + Highlight open vertexes I-highlight ang mga bukas na vertex - + Ignore construction geometry Huwag intindihin ang konstruksyon geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Kabaligtarang panlabas na geometry - + Swap endpoints in constraints Pagpalitin ang mga endpoint sa mga pagpilit - + Constraint orientation locking Pag-lock ng oryentasyon ng pagpigil - + Enable/Update Paganahin/I-update - + Disable Huwag paganahin @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Hindi valid ang sketch - + Do you want to open the sketch validation tool? Gusto mo bang buksan ang kasangkapan sa pag validate ng sketch? - + The sketch is invalid and cannot be edited. Ang sketch ay hindi valid at hindi pwdeng i-edit. - + Please remove the following constraint: Mangyaring alisin ang sumusunod na pagpilit: - + Please remove at least one of the following constraints: Mangyaring alisin ang hindi bababa sa isa sa mga sumusunod na mga pagpilit: - + Please remove the following redundant constraint: Mangyaring alisin ang sumusunod na paulit ulit na pagpilit: - + Please remove the following redundant constraints: Mangyaring alisin ang sumusunod na paulit ulit na mga pagpilit: - + Empty sketch Walang laman na sketch - + Over-constrained sketch Sobrang-constrained na sketch - - - + + + (click to select) (Mag-klik para pumili) - + Sketch contains conflicting constraints Ang sketch ay naglalaman ng magkakasalungat na mga pagpilit - + Sketch contains redundant constraints Ang sketch ay naglalaman ng paulit ulit na mga pagpilit - + Fully constrained sketch Kabuuang-constrained na sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Lutasin sa loob ng %1 sec - + Unsolved (%1 sec) Hindi naresolba (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Ayusin ang radius ng isang bilog o isang arko @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Gumawa ng isang arko sa pamamagitan ng mga punto ng pagtatapos nito at isang punto kasama ang arko @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Lumikha ng bilog gamit ang 3 rim na puntos @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Gumawa ng isang arko sa pamamagitan ng sentro nito at sa pamamagitan ng mga punto ng pagtatapos nito @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Lumikha ng isang arc ng ellipse sa pamamagitan ng gitna nito, pangunahing radius, mga endpoint @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Lumikha ng isang arc ng hyperbola sa pamamagitan ng gitna nito, pangunahing radius, mga endpoint @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Lumikha ng isang arc ng parabola sa pamamagitan ng focus, vertex, mga endpoint nito @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline sa pamamagitan ng mga puntong pangkontrol - - + + Create a B-spline by control points Lumikha ng isang B-spline sa pamamagitan ng mga kontrol na punto @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Lumikha ng bilog sa pamamagitan ng gitna nito at ng punto ng rim @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Lumikha ng isang ellipse sa pamamagitan ng periapsis, apoapsos, at maliitna radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Lumikha ng isang ellipse sa pamamagitan ng gitna nito, pangunahing radius at punto @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Lumikha ng isang heptagon sa pamamagitan ng gitna nito at ng isang sulok @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Lumikha ng isang hexagon sa pamamagitan ng gitna nito at ng isang sulok @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Lumikha ng isang octagon sa pamamagitan ng gitna nito at ng isang sulok - - + + Create a regular polygon by its center and by one corner Gumawa ng kaaniwang poligon sa kanyang sentro at sa isang sulok @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Lumikha ng isang pentagon sa pamamagitan ng gitna nito at ng isang sulok @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Lumikha ng isang parisukat sa pamamagitan ng gitna nito at ng isang sulok @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Lumikha ng isang equilateral na tatsulok sa pamamagitan ng gitna nito at ng isang sulok @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline sa pamamagitan ng mga puntong pangkontrol - - + + Create a periodic B-spline by control points Lumikha ng isang periodic B-spline sa pamamagitan ng mga puntos ng kontrol diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index c6b4a7cf2c..c2f93add1b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 051ca92c5c..359fde645a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Esquisseur - + CarbonCopy Copie carbone - + Copies the geometry of another sketch Copie la géométrie d’une autre esquisse @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Esquisseur - + Constrain arc or circle Contraindre l’arc ou le cercle - + Constrain an arc or a circle Contraindre un arc ou un cercle - + Constrain radius Contrainte radiale - + Constrain diameter Contraindre le diamètre @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Esquisseur - + Create arc Créer un arc - + Create an arc in the sketcher Créer un arc de cercle dans l'esquisse - + Center and end points Centre et points d'extrémité - + End points and rim point Points d'extrémité et point sur périmètre @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Esquisseur - + Create a B-spline Créer une B-spline - + Create a B-spline in the sketch Créer une B-spline dans l’esquisse @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Esquisseur - + Create circle Créer un cercle - + Create a circle in the sketcher Créer un cercle dans l'esquisse - + Center and rim point Point de centre et de bord - + 3 rim points Cercle par 3 points @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Esquisseur - + Create a conic Créer une conique - + Create a conic in the sketch Créer une conique dans l’esquisse - + Ellipse by center, major radius, point Ellipse par centre, demi-grand axe, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse par le périapse, apoapse, demi-petit axe - + Arc of ellipse by center, major radius, endpoints Arc d'ellipse par centre, demi-grand axe, extrémités - + Arc of hyperbola by center, major radius, endpoints Arc d'hyperbole par centre, axe focal, extrémités - + Arc of parabola by focus, vertex, endpoints Arc de parabole par foyer, sommet, points d'extrémités @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Esquisseur - + Create regular polygon Créer un polygone régulier - + Create a regular polygon in the sketcher Créer un polygone régulier dans l'esquisse - + Triangle Triangle - + Square Carré - + Pentagon Pentagone - + Hexagon Hexagone - + Heptagon Heptagone - + Octagon Octogone - + Regular Polygon Polygone régulier @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Esquisseur - + Constrain angle Contrainte angulaire - + Fix the angle of a line or the angle between two lines Fixer l'angle d'une ligne ou l'angle entre deux lignes @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Esquisseur - + Constrain Block Contrainte de blocage - + Create a Block constraint on the selected item Créer une contrainte de type blocage sur l'élément sélectionné @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Esquisseur - + Constrain coincident Contrainte coïncidente - + Create a coincident constraint on the selected item Créer une contrainte coïncidente sur les éléments sélectionnés @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Esquisseur - + Constrain diameter Contraindre le diamètre - + Fix the diameter of a circle or an arc Fixer le diamètre d'un cercle ou d'un arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Esquisseur - + Constrain distance Contrainte dimensionnelle - + Fix a length of a line or the distance between a line and a vertex Fixer la longueur d'une ligne ou la distance entre une ligne et un point @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Esquisseur - + Constrain horizontal distance Contrainte distance horizontale - + Fix the horizontal distance between two points or line ends Fixer la distance horizontale entre deux points ou extrémités de ligne @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Esquisseur - + Constrain vertical distance Contraindre distance verticale - + Fix the vertical distance between two points or line ends Fixer la distance verticale entre deux points ou extrémités de ligne @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Esquisseur - + Constrain equal Contrainte d'égalité - + Create an equality constraint between two lines or between circles and arcs Créer une contrainte d'égalité entre deux lignes ou entre des cercles et/ou des arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Esquisseur - + Constrain horizontally Contrainte horizontale - + Create a horizontal constraint on the selected item Créer une contrainte horizontale sur l'élément sélectionné @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Esquisseur - + Constrain InternalAlignment Contraindre l'alignement interne - + Constrains an element to be aligned with the internal geometry of another element Contraint un élément pour qu'il soit aligné avec la géométrie interne d'un autre élément @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Esquisseur - + Constrain lock Contrainte fixe - + Create a lock constraint on the selected item Créer une contrainte fixe sur l'élément sélectionné @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Esquisseur - + Constrain parallel Contrainte parallèle - + Create a parallel constraint between two lines Créer une contrainte parallèle entre deux lignes @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Esquisseur - + Constrain perpendicular Contrainte perpendiculaire - + Create a perpendicular constraint between two lines Créer une contrainte de perpendicularité entre deux lignes @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Esquisseur - + Constrain point onto object Contrainte point sur objet - + Fix a point onto an object Fixer un point sur un objet @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Esquisseur - + Constrain radius Contrainte radiale - + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Esquisseur - + Constrain refraction (Snell's law') Contraint la réfraction (loi de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Créer une contrainte de réfraction (loi de Snell) entre deux extrémités des rayons et une arête en tant qu'interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Esquisseur - + Constrain symmetrical Contrainte symétrique - + Create a symmetry constraint between two points with respect to a line or a third point Créer une contrainte de symétrie entre deux points par rapport à une ligne ou un point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Esquisseur - + Constrain tangent Contrainte tangente - + Create a tangent constraint between two entities Créer une contrainte tangente entre deux entités @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Esquisseur - + Constrain vertically Contrainte verticale - + Create a vertical constraint on the selected item Créer une contrainte verticale sur l'élément sélectionné @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Esquisseur - + Create arc by three points Créer un arc par 3 points - + Create an arc by its end points and a point along the arc Créer un arc par ses extrémités et un point sur l'arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Esquisseur - + Create circle by three points Créer un cercle par trois points - + Create a circle by 3 perimeter points Crée un cercle par 3 points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Esquisseur - + Create arc by center Créer un arc à partir du centre - + Create an arc by its center and by its end points Créer un arc par son centre et ses extrémités @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Esquisseur - + Create an arc of ellipse Créer un arc d'ellipse - + Create an arc of ellipse in the sketch Créer un arc d'ellipse dans l'esquisse @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Esquisseur - + Create an arc of hyperbola Créer un arc d'hyperbole - + Create an arc of hyperbola in the sketch Créer un arc d’hyperbole dans l’esquisse @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Esquisseur - + Create an arc of parabola Créer un arc de parabole - + Create an arc of parabola in the sketch Créer un arc de parabole dans l'esquisse @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Esquisseur - + Create B-spline Créer une B-spline - + Create a B-spline via control points in the sketch. Créer une B-spline par points de contrôle dans l'esquisse. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Esquisseur - + Create circle Créer un cercle - + Create a circle in the sketch Créer un cercle dans l'esquisse @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Esquisseur - + Create draft line Créer une ligne de construction - + Create a draft line in the sketch Créer une ligne de construction dans l'esquisse @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Esquisseur - + Create ellipse by 3 points Créer une ellipse via 3 points - + Create an ellipse by 3 points in the sketch Créer une ellipse via 3 points dans l'esquisse @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Esquisseur - + Create ellipse by center Créer une ellipse par son centre - + Create an ellipse by center in the sketch Créer une ellipse par son centre dans l'esquisse @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Esquisseur - + Create fillet Créer un congé - + Create a fillet between two lines or at a coincident point Créer un congé entre deux lignes ou un sur un sommet coïncident @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Esquisseur - + Create heptagon Créer un heptagone - + Create a heptagon in the sketch Créer un heptagone dans l'esquisse @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Esquisseur - + Create hexagon Créer un hexagone - + Create a hexagon in the sketch Créer un hexagone dans l'esquisse @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Esquisseur - + Create line Créer une ligne - + Create a line in the sketch Créer une ligne dans l'esquisse @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Esquisseur - + Create octagon Créer un octogone - + Create an octagon in the sketch Créer un octogone dans l'esquisse @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Esquisseur - + Create pentagon Créer un pentagone - + Create a pentagon in the sketch Créer un pentagone dans l'esquisse @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Esquisseur - + Create periodic B-spline Créer une B-spline périodique - + Create a periodic B-spline via control points in the sketch. Créer une B-spline périodique par points de contrôle dans l'esquisse. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Esquisseur - + Create point Créer un point - + Create a point in the sketch Créer un point dans l'esquisse @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Esquisseur - + Create polyline Créer une polyligne - + Create a polyline in the sketch. 'M' Key cycles behaviour Créer une polyligne dans l'esquisse. La touche 'M' bascule entre les modes disponibles @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Esquisseur - + Create rectangle Créer un rectangle - + Create a rectangle in the sketch Créer un rectangle dans l'esquisse @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Esquisseur - + Create regular polygon Créer un polygone régulier - + Create a regular polygon in the sketch Créez un polygone régulier dans l'esquisse @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Esquisseur - + Create slot Créer une rainure - + Create a slot in the sketch Créer un rainure dans l'esquisse @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Esquisseur - + Create square Créer un carré - + Create a square in the sketch Créer un carré dans l'esquisse @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Esquisseur - + Create text Insérer du texte - + Create text in the sketch Insérer un texte dans l'esquisse @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Esquisseur - + Create equilateral triangle Créer un triangle équilatéral - + Create an equilateral triangle in the sketch Créer un triangle équilatéral dans l'esquisse @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Esquisseur - + Extend edge Prolonger l'arête - + Extend an edge with respect to the picked position Prolonger une arête par rapport à la position sélectionnée @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Esquisseur - + External geometry Géométrie externe - + Create an edge linked to an external geometry Créer une arête liée à une géométrie externe. @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Esquisseur - + Toggle activate/deactivate constraint Activer/désactiver la contrainte - + Toggles activate/deactivate state for selected constraints Basculer l'état activé/désactivé pour les contraintes sélectionnées @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Esquisseur - + Toggle reference/driving constraint Basculer entre contrainte pilotante et dimension de référence - + Toggles the toolbar or selected constraints to/from reference mode Active/désactive la barre d'outils ou la contrainte sélectionnée vers/depuis le mode référence @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Esquisseur - + Trim edge Ajuster l'arête - + Trim an edge with respect to the picked position Ajuster une arête par rapport à la position sélectionnée. @@ -1952,47 +1952,47 @@ Erreur de contrainte automatique : esquisse insoluble après l'application des contraintes d'égalité. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. L'intersection des courbes n'a pas pu être trouvée. Essayez d’ajouter une contrainte de coïncidence entre les sommets des courbes sur lesquels vous souhaitez appliquer un congé. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Cette version de OCE/OCC ne supporte pas l’opération de noeud. Vous avez besoin de la version 6.9.0 ou supérieure. - + BSpline Geometry Index (GeoID) is out of bounds. L'Index de la géométrie de la B-spline (GeoID) est hors limites. - + You are requesting no change in knot multiplicity. Vous ne demandez aucun changement dans la multiplicité du nœud. - + The Geometry Index (GeoId) provided is not a B-spline curve. L’Index de la géométrie (GeoID) fourni n’est pas une courbe B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L’index du nœud est hors limites. Notez que, conformément à la notation OCC, le premier nœud a un indice de 1 et non pas de zéro. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicité ne peut pas être augmentée au-delà du degré de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicité ne peut pas être diminuée au-delà de zéro. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC ne parvient pas à diminuer la multiplicité selon la tolérance maximale. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Sélectionnez une ou des arêtes de l'esquisse. - - - - + + + + Dimensional constraint Contrainte dimensionnelle @@ -2232,273 +2232,273 @@ Un des éléments sélectionnés doit être dans l'esquisse - - + + Select an edge from the sketch. Sélectionnez une arête de l'esquisse. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Contrainte impossible - - - - + + + + The selected edge is not a line segment L'arête sélectionnée n'est pas un segment de ligne - - - - - - + + + + + + Double constraint Double contrainte - - - - + + + + The selected edge already has a horizontal constraint! L’arête sélectionnée possède déjà une contrainte horizontale ! - - - - + + + + The selected edge already has a vertical constraint! L’arête sélectionnée possède déjà une contrainte horizontale ! - - - - - - + + + + + + The selected edge already has a Block constraint! L’arête sélectionnée possède déjà une contrainte de bloc ! - + The selected item(s) can't accept a horizontal constraint! Le(s) élément(s) sélectionné(s) ne peu(ven)t pas accepter de contrainte horizontale! - + There are more than one fixed point selected. Select a maximum of one fixed point! Plus qu'un point fixe sélectionné. Sélectionnez au plus un point fixe ! - + The selected item(s) can't accept a vertical constraint! Le(s) élément(s) sélectionné(s) ne peu(ven)t pas accepter de contrainte verticale! - + There are more than one fixed points selected. Select a maximum of one fixed point! Plus d'un point fixe est sélectionné. Sélectionnez au maximum un point fixe ! - - + + Select vertices from the sketch. Sélectionner des sommets de l’esquisse. - + Select one vertex from the sketch other than the origin. Sélectionner un sommet autre que l'origine dans l'esquisse. - + Select only vertices from the sketch. The last selected vertex may be the origin. Sélectionner uniquement les points de l’esquisse. Le dernier point sélectionné peut être l’origine. - + Wrong solver status Erreur de statut du solveur - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Un contrainte de type blocage ne peut pas être ajoutée si l'esquisse n'est pas résolue ou s'il y a des contraintes redondantes ou conflictuelles. - + Select one edge from the sketch. Sélectionnez une arête de l’esquisse. - + Select only edges from the sketch. Sélectionnez uniquement des arêtes de l'esquisse. - - - - - - - + + + + + + + Error Erreur - + Select two or more points from the sketch. Sélectionnez deux ou plusieurs points de l’esquisse. - - + + Select two or more vertexes from the sketch. Sélectionnez deux sommets de l'esquisse ou plus. - - + + Constraint Substitution Substitution de contrainte - + Endpoint to endpoint tangency was applied instead. Une contrainte de tangence entre points d'extrémité a été créée à la place. - + Select vertexes from the sketch. Sélectionnez les sommets de l'esquisse. - - + + Select exactly one line or one point and one line or two points from the sketch. Sélectionnez soit une seule ligne, ou un point et une ligne, ou deux points de l'esquisse. - + Cannot add a length constraint on an axis! Impossible d'ajouter une contrainte de longueur sur un axe ! - + This constraint does not make sense for non-linear curves Cette contrainte n’a aucun sens pour les courbes non linéaires - - - - - - + + + + + + Select the right things from the sketch. Sélectionner les bons éléments de l'esquisse. - - + + Point on B-spline edge currently unsupported. Point sur arête B-spline actuellement non pris en charge. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Aucun des points sélectionnés n'ont été contraints aux courbes respectives, soit parce qu'ils font partie du même élément, soit parce qu'ils font tous partie de géométries externes. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Sélectionnez soit un point et plusieurs courbes, soit une courbe et plusieurs points. Vous avez sélectionné %1 courbes et %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Sélectionnez soit une seule ligne ou jusqu'à deux points de l'esquisse. - + Cannot add a horizontal length constraint on an axis! Impossible d'ajouter une contrainte de longueur horizontale sur un axe ! - + Cannot add a fixed x-coordinate constraint on the origin point! Impossible d'ajouter une contrainte fixe de coordonnée x sur le point d'origine ! - - + + This constraint only makes sense on a line segment or a pair of points Cette contrainte n’a de sens que sur un segment de ligne ou une paire de points - + Cannot add a vertical length constraint on an axis! Impossible d'ajouter une contrainte de longueur verticale sur un axe ! - + Cannot add a fixed y-coordinate constraint on the origin point! Impossible d'ajouter une contrainte fixe de coordonnée y sur le point d'origine ! - + Select two or more lines from the sketch. Sélectionnez au moins deux lignes de l'esquisse. - - + + Select at least two lines from the sketch. Sélectionner au moins deux lignes de l'esquisse. - + Select a valid line Sélectionnez une ligne valide - - + + The selected edge is not a valid line L'arête sélectionnée n'est pas une ligne valide - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. - + Select some geometry from the sketch. perpendicular constraint Sélectionnez une géométrie de l'esquisse. - + Wrong number of selected objects! perpendicular constraint Nombre d'objets sélectionnés erroné ! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Pour une sélection de 3 objets, il doit y avoir 2 courbes et 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Impossible d'ajouter une contrainte de perpendicularité sur un point non connecté ! - - - + + + Perpendicular to B-spline edge currently unsupported. Contrainte perpendiculaire à arête B-spline actuellement non prise en charge. - - + + One of the selected edges should be a line. Une des arêtes sélectionnées doit être une ligne. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. - + Select some geometry from the sketch. tangent constraint Sélectionnez une géométrie de l'esquisse. - + Wrong number of selected objects! tangent constraint Nombre d'objets sélectionnés erroné ! - - - + + + Cannot add a tangency constraint at an unconnected point! Impossible d'ajouter une contrainte de tangence à un point non connecté ! - - - + + + Tangency to B-spline edge currently unsupported. Tangence à arrête B-spline actuellement non prise en charge. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Une contrainte de tangence entre points d'extrémité a été créée. La contrainte de coïncidence a été supprimée. - - - - + + + + Select one or more arcs or circles from the sketch. Sélectionnez un ou plusieurs arcs ou cercles dans l'esquisse. - - + + Constrain equal Contrainte d'égalité - + Do you want to share the same radius for all selected elements? Voulez-vous que tous les éléments sélectionnés aient le même rayon? - - + + Constraint only applies to arcs or circles. Contrainte applicable qu’aux arcs ou cercles. - + Do you want to share the same diameter for all selected elements? Voulez-vous que tous les éléments sélectionnés aient le même diamètre ? - - + + Select one or two lines from the sketch. Or select two edges and a point. Sélectionnez une ou deux lignes dans l'esquisse. Ou sélectionnez deux arêtes et un point. - - + + Parallel lines Lignes parallèles - - + + An angle constraint cannot be set for two parallel lines. Une contrainte angulaire ne peut pas être appliquée à deux lignes parallèles. - + Cannot add an angle constraint on an axis! Impossible d'ajouter une contrainte angulaire sur un axe ! - + Select two edges from the sketch. Sélectionnez deux arêtes de l'esquisse. - - + + Select two or more compatible edges Sélectionnez au moins deux arêtes compatibles. - + Sketch axes cannot be used in equality constraints Les axes d'esquisse ne peuvent être utilisés dans une contrainte d'égalité. - + Equality for B-spline edge currently unsupported. Égalité pour arête B-Spline actuellement non prise en charge. - - + + Select two or more edges of similar type Sélectionnez au moins deux arêtes de même type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Sélectionnez deux points et une ligne de symétrie, deux points et un point de symétrie, ou une ligne et un point de symétrie dans l'esquisse. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Impossible d'ajouter une contrainte de symétrie entre une ligne et ses points d'extrémité ! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Sélectionnez deux extrémités de lignes pour agir comme des rayons, et une arête qui représente une limite. Le premier point sélectionné correspond à l'indice n1, le deuxième - à n2, et la valeur définit le rapport n2/n1. - + Selected objects are not just geometry from one sketch. Les objets sélectionnés ne sont pas seulement des géométries de l'esquisse. - + Number of selected objects is not 3 (is %1). Le nombre d'objets sélectionnés n'est pas égal à 3 (est %1). - + Cannot create constraint with external geometry only!! Impossible de créer la contrainte uniquement avec une géométrie externe !! - + Incompatible geometry is selected! La géométrie sélectionnée est incompatible ! - + SnellsLaw on B-spline edge currently unsupported. Loi de Snell sur arête B-Spline actuellement non pris en charge. - - + + Select at least one ellipse and one edge from the sketch. Sélectionnez au moins une ellipse et une arête dans l'esquisse. - + Sketch axes cannot be used in internal alignment constraint Les axes de l'esquisse ne peuvent être utilisés comme contrainte d'alignement interne - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Vous ne pouvez pas contraindre une ellipse à la géométrie interne d'une autre ellipse. Sélectionnez une seule ellipse. - - + + Maximum 2 points are supported. 2 points sont supportés au maximum. - - + + Maximum 2 lines are supported. 2 lignes sont supportées au maximum. - - + + Nothing to constrain Rien à contraindre - + Currently all internal geometry of the ellipse is already exposed. Actuellement, toute la géométrie interne de l'ellipse est déjà exposée. - - - - + + + + Extra elements Éléments supplémentaires - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Trop d'éléments ont été fournis pour l'ellipse donnée. Ils ont été ignorés. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Vous ne pouvez pas contraindre un arc d'ellipse à la géométrie interne d'un autre arc d'ellipse. Sélectionnez un seul arc d'ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Vous ne pouvez pas contraindre un arc d'ellipse à la géométrie interne d'un autre arc d'ellipse. Sélectionnez un seul arc d'ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Actuellement, toute la géométrie interne de l'arc d'ellipse est déjà exposée. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Trop d'éléments ont été fournis pour l'arc d'ellipse donné. Ils ont été ignorées. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actuellement la géométrie interne est uniquement prise en charge pour les ellipses et les arcs d'ellipse. Le dernier élément sélectionné doit être une ellipse ou un arc d'ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Sélectionner les contraintes de l'esquisse. - + CAD Kernel Error Erreur de noyau CAO @@ -2941,42 +2941,42 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. La copie carbone causerait une dépendance circulaire. - + This object is in another document. Cet objet est dans un autre document. - + This object belongs to another body. Hold Ctrl to allow cross-references. Cet objet appartient à un autre corps. Maintenez Ctrl enfoncé pour autoriser les références croisées. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Cet objet appartient à un autre corps et contient une géométrie externe. La référence croisée n'est pas autorisée. - + This object belongs to another part. Cet objet appartient à une autre pièce. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. L’esquisse sélectionnée n’est pas parallèle à cette esquisse. Utiliser Ctrl + Alt pour permettre des esquisses non parallèles. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Les axes XY de l’esquisse sélectionnée n’ont pas le même direction que cette esquisse. Utiliser Ctrl + Alt pour ne pas en tenir compte. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. L’origine de l’esquisse sélectionnée ne correspond pas à l’origine de cette esquisse. Appuyez sur Ctrl + Alt pour ne pas en tenir compte. @@ -3062,8 +3062,8 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d insérer un rayon - - + + Radius: Rayon : @@ -3074,8 +3074,8 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Insérer un diamètre - - + + Diameter: Diamètre : @@ -3103,24 +3103,24 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Longueur : - - + + Change radius Changer le rayon - - + + Change diameter Modifier le diamètre - + Refractive index ratio Ratio de l'indice de réfraction - + Ratio n2/n1: Ratio n2/n1 : @@ -3136,22 +3136,22 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Ajouter ceci créera une référence circulaire. - + This object is in another document. Cet objet est dans un autre document. - + This object belongs to another body, can't link. Cet objet ne peut être lié car il appartient à un autre corps. - + This object belongs to another part, can't link. Cet objet ne peut être lié car il appartient à une autre pièce. @@ -3192,8 +3192,8 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d SketcherGui::PropertyConstraintListItem - - + + Unnamed Sans nom @@ -3908,6 +3908,26 @@ Toutefois, aucune contrainte liée aux extrémités n'a été trouvée.All constraints that deal with external geometry were deleted. Toutes les contraintes liées à une géométrie externe ont été supprimées. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4254,70 +4274,77 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Validation de l'esquisse - + Invalid constraints Contraintes non valides - - + + + Fix Réparer - - + + + Find Rechercher - + Delete constraints to external geom. Supprimer les contraintes liées à une géométrie externe - + Missing coincidences Coïncidences manquantes - + Tolerance: Tolérance : - + Highlight open vertexes Mettre en évidence les sommets ouverts - + Ignore construction geometry Ignorer les géométries de construction + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Géométrie externe inversée - + Swap endpoints in constraints Inverser les points d'extrémité de contraintes - + Constraint orientation locking Contrainte de verrouillage d'orientation - + Enable/Update Activer/Mettre à jour - + Disable Désactiver @@ -4325,104 +4352,104 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% SketcherGui::ViewProviderSketch - + Edit sketch Modifier l'esquisse - + A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches - + Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? - + Invalid sketch Esquisse non valide - + Do you want to open the sketch validation tool? Voulez-vous ouvrir l'outil de validation d'esquisse ? - + The sketch is invalid and cannot be edited. L'esquisse n'est pas valide et ne peut pas être éditée. - + Please remove the following constraint: Veuillez supprimer la contrainte suivante : - + Please remove at least one of the following constraints: Veuillez supprimer au moins une des contraintes suivantes : - + Please remove the following redundant constraint: Veuillez supprimer la contrainte redondante suivante : - + Please remove the following redundant constraints: Veuillez supprimer les contraintes redondantes suivantes : - + Empty sketch Esquisse vide - + Over-constrained sketch Esquisse sur-contrainte - - - + + + (click to select) (cliquez pour sélectionner) - + Sketch contains conflicting constraints L'esquisse contient des contraintes contradictoires - + Sketch contains redundant constraints L'esquisse contient des contraintes redondantes - + Fully constrained sketch Esquisse entièrement contrainte - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Esquisse sous-contrainte avec <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degré</span></a> de liberté - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Esquisse sous-contrainte avec <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrés</span></a> de liberté - + Solved in %1 sec Résolu en %1 secondes - + Unsolved (%1 sec) Non résolu (%1 sec) @@ -4511,8 +4538,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixer le diamètre d'un cercle ou d'un arc @@ -4520,8 +4547,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -4538,8 +4565,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Créer un arc par ses extrémités et un point sur l'arc @@ -4547,8 +4574,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Créer un cercle par 3 points @@ -4556,8 +4583,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateArc - - + + Create an arc by its center and by its end points Créer un arc par son centre et ses extrémités @@ -4565,8 +4592,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Créer un arc d'ellipse par son centre, le rayon majeur, les extrémités @@ -4574,8 +4601,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Créer un arc d’hyperbole par son centre, le grand rayon, les points d'extrémités @@ -4583,8 +4610,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Créer un arc de parabole par son foyer, son sommet, ses points d'extrémités @@ -4592,13 +4619,13 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateBSpline - + B-spline by control points B-spline par points de contrôle - - + + Create a B-spline by control points Créer une B-spline par points de contrôle @@ -4606,8 +4633,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Créer un cercle par son centre et par un point sur le périmètre @@ -4615,8 +4642,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Créer une ellipse avec le périapse, l'apoapse et le petit rayon @@ -4624,8 +4651,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Créer une ellipse par son centre, le grand rayon et un point @@ -4633,8 +4660,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Créer un heptagone avec son centre et un sommet @@ -4642,8 +4669,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Créer un hexagone avec son centre et un sommet @@ -4651,14 +4678,14 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Créer un octogone avec son centre et un sommet - - + + Create a regular polygon by its center and by one corner Créer un polygone régulier par son centre et un sommet @@ -4666,8 +4693,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Créer un pentagone avec son centre et un sommet @@ -4675,8 +4702,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateSquare - - + + Create a square by its center and by one corner Créer un carré avec son centre et un sommet @@ -4684,8 +4711,8 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Créer un triangle équilatéral avec son centre et un sommet @@ -4693,13 +4720,13 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline périodique par points de contrôle ou pôles - - + + Create a periodic B-spline by control points Créer une B-spline périodique par points de contrôle diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm index 51dcae300f..417201ac30 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts index 0978e253af..525cd1636b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Copia de Carbón - + Copies the geometry of another sketch Copia a xeometría doutro croquis @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrinxir arco ou círculo - + Constrain an arc or a circle Constrinxir un arco ou un círculo - + Constrain radius Constrinxir raio - + Constrain diameter Constrixir diámetro @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Fai un arco no esbozo - + Center and end points Centro e puntos finais - + End points and rim point Puntos finais e punto de bordo @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Facer B-spline - + Create a B-spline in the sketch Fai unha B-spline no esbozo @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Facer círculo - + Create a circle in the sketcher Fai un círculo no esbozo - + Center and rim point Centro e punto de bordo - + 3 rim points 3 puntos de bordo @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Facer unha cónica - + Create a conic in the sketch Fai unha cónica no esbozo - + Ellipse by center, major radius, point Elipse mediante centro, raio maior e punto - + Ellipse by Periapsis, apoapsis, minor radius Elipse mediante periapse, apoapse e raio menor - + Arc of ellipse by center, major radius, endpoints Arco de elipse mediante centro, raio maior e cabos - + Arc of hyperbola by center, major radius, endpoints Arco de hipérbole mediante centro, raio maior e cabos - + Arc of parabola by focus, vertex, endpoints Arco de parábola mediante focos, vértice e cabos @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Facer un polígono regular - + Create a regular polygon in the sketcher Crea un polígono regular no esbozo - + Triangle Triángulo - + Square Cadrado - + Pentagon Pentágono - + Hexagon Hexágono - + Heptagon Heptágono - + Octagon Octógono - + Regular Polygon Polígono Regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Constrinxir o ángulo - + Fix the angle of a line or the angle between two lines Fixar o ángulo dunha liña ou o ángulo entre dúas liñas @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Bloque de constricións - + Create a Block constraint on the selected item Crea un bloque de constrición no artigo escolmado @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Constrinxir coincidentes - + Create a coincident constraint on the selected item Fai unha constrición de coincidencia nos elementos escolmados @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrixir diámetro - + Fix the diameter of a circle or an arc Fixa o diámetro dun círculo ou arco @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Constrinxir a distancia - + Fix a length of a line or the distance between a line and a vertex Fixar a lonxitude dunha liña ou a distancia entre unha liña mais un vértice @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixar a distancia horizontal entre dous puntos ou os cabos dunha liña @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixar a distancia vertical entre dous puntos ou os cabos dunha liña @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Constrinxir a igualdade - + Create an equality constraint between two lines or between circles and arcs Fai unha constrición de igualdade entre dúas liñas ou entre círculos e arcos @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Constrinxir horizontalmente - + Create a horizontal constraint on the selected item Fai unha constrición horizontal nos elementos escolmados @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrinxir Aliñamento Interno - + Constrains an element to be aligned with the internal geometry of another element Constrinxe un elemento para se aliñar coa xeometría interna doutro elemento @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Constrición fixa - + Create a lock constraint on the selected item Fai unha constrición fixa nos elementos escolmados @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Constrinxir o paralelismo - + Create a parallel constraint between two lines Fai unha constrición de paralelismo entre dúas liñas @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Constrinxir a perpendicularidade - + Create a perpendicular constraint between two lines Fai unha constrición de perpendicularidade entre dúas liñas @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Constrinxir un punto a un obxecto - + Fix a point onto an object Fixa un punto a un obxecto @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Constrinxir raio - + Fix the radius of a circle or an arc Fixa o raio dun círculo ou arco @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrinxir a refracción (Lei de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Fai unha constrición segundo a lei de refracción (ley de Snell) entre dous cabos dos raios cunha aresta como interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Constrinxir a simetría - + Create a symmetry constraint between two points with respect to a line or a third point Fai unha constrición de simetría entre dous puntos con respecto a unha liña ou a un terceiro punto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Constrinxir a tanxencia - + Create a tangent constraint between two entities Fai unha constrición de tanxencia entre dúas entidades @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Constrinxir verticalmente - + Create a vertical constraint on the selected item Fai unha constrición vertical nos elementos escolmados @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Facer un arco mediante tres puntos - + Create an arc by its end points and a point along the arc Fai un arco mediante os seus puntos finais mais un punto calquera no arco @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Facer un círculo mediante tres puntos - + Create a circle by 3 perimeter points Facer un círculo mediante tres puntos no perímetro @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Facer un arco cun centro dado - + Create an arc by its center and by its end points Facer un arco mediante o centro mais os seus puntos finais @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Facer un arco de elipse - + Create an arc of ellipse in the sketch Fai unha liña de construción no esbozo @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Facer un arco de hipérbole - + Create an arc of hyperbola in the sketch Fai un arco de hipérbole no esbozo @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Facer un arco de parábola - + Create an arc of parabola in the sketch Fai un arco de parábola no esbozo @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Facer B-spline - + Create a B-spline via control points in the sketch. Fai unha BSpline por medio de puntos de control no esbozo. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Facer círculo - + Create a circle in the sketch Fai un círculo no esbozo @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Facer liña de construción - + Create a draft line in the sketch Fai unha liña de construción no esbozo @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Facer elipse mediante 3 puntos - + Create an ellipse by 3 points in the sketch Fai unha elipse mediante 3 puntos no esbozo @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Facer elipse mediante centro - + Create an ellipse by center in the sketch Fai unha elipse mediante centro no esbozo @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Facer chafrán - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Facer un heptágono - + Create a heptagon in the sketch Fai un heptágono no esbozo @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Facer un hexágono - + Create a hexagon in the sketch Fai un hexágono no esbozo @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Facer unha liña - + Create a line in the sketch Fai unha liña no esbozo @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Facer un octógono - + Create an octagon in the sketch Fai un octógono no esbozo @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Facer un pentágono - + Create a pentagon in the sketch Fai un pentágono no esbozo @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Facer unha B-spline periódica - + Create a periodic B-spline via control points in the sketch. Fai unha BSpline periódica por medio de puntos de control no esbozo. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Facer un punto - + Create a point in the sketch Fai un punto no esbozo @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Facer unha poliliña - + Create a polyline in the sketch. 'M' Key cycles behaviour Fai unha poliliña no esbozo. A tecla 'M' alterna o seu comportamento ciclicamente @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Facer un rectángulo - + Create a rectangle in the sketch Fai un rectángulo no esbozo @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Facer un polígono regular - + Create a regular polygon in the sketch Crea un polígono regular nun esbozo @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Facer unha rañura - + Create a slot in the sketch Fai unha rañura no esbozo @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Facer cadrado - + Create a square in the sketch Fai un cadrado no esbozo @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Facer un texto - + Create text in the sketch Fai un texto no esbozo @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Facer un triángulo equilátero - + Create an equilateral triangle in the sketch Fai un triángulo equilátero no esbozo @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Estendido - + Extend an edge with respect to the picked position Extender un borde con respecto á posición escolmada @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Xeometría externa - + Create an edge linked to an external geometry Facer unha aresta ligada a unha xeometría externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Alternar constricións fixas/guiadas - + Toggles the toolbar or selected constraints to/from reference mode Alterna, ben a barra de ferramentas ou ben as constricións escolmadas entre modo de referencia ou guiado @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Tallar aresta - + Trim an edge with respect to the picked position Tallar unha aresta na parte escollida hasta o/s próximo/s cruzamento/s @@ -1952,47 +1952,47 @@ Erro auto constrición: esbozo sen solución despois de aplicar constricións de igualdade. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Non se pode adiviñar a intersección de curvas. Tenta engadir unha constrición entre os vértices das curvas que queres achaflanar. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versión de OCE/OCC non soporta operacións de nó. Ti necesitas 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. A xeometría BSpline de Index (GeoID) está fora da construción. - + You are requesting no change in knot multiplicity. Vostede está solicitando sen troco en multiplicidade de nodo. - + The Geometry Index (GeoId) provided is not a B-spline curve. A Xeometría Index (Geold) proporcionada non é unha curva BSpline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice de nodo está fora dos límites. Note que según en concordancia coa notación da OCC, o primeiro nodo ten índice 1 e non 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade non pode incrementada máis alá do grao da BSpline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade non pode ser diminuida máis alá de cero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC non é quen de diminuir a multiplicidade dentro da tolerancia máxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Escolmar aresta(s) do esbozo. - - - - + + + + Dimensional constraint Constrinxir dimensión @@ -2232,273 +2232,273 @@ Un dos escolmados ten que estar no esbozo - - + + Select an edge from the sketch. Escolme unha aresta do esbozo. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Imposible constrinxir - - - - + + + + The selected edge is not a line segment A aresta escolmada non é un segmento de liña - - - - - - + + + + + + Double constraint Dobre constrición - - - - + + + + The selected edge already has a horizontal constraint! A bordo escolmado xa ten unha constrición horizontal! - - - - + + + + The selected edge already has a vertical constraint! A bordo escolmado xa ten unha constrición vertical! - - - - - - + + + + + + The selected edge already has a Block constraint! O bordo escolmado xa ten constrición de Bloque! - + The selected item(s) can't accept a horizontal constraint! O/s elemento/s escolmado/s non pode/n aceptar unha constrición horizontal! - + There are more than one fixed point selected. Select a maximum of one fixed point! Hai máis dun punto fixo escolmado. Escolma un máximo dun punto fixo! - + The selected item(s) can't accept a vertical constraint! O/s elemento/s escolmado/s non pode/n aceptar unha constrición vertical! - + There are more than one fixed points selected. Select a maximum of one fixed point! Hai máis dun punto fixo escolmado. Escolma un máximo dun punto fixo! - - + + Select vertices from the sketch. Escolmar vértices do esbozo. - + Select one vertex from the sketch other than the origin. Escolme un vértice do esbozo distinto da orixe. - + Select only vertices from the sketch. The last selected vertex may be the origin. Escolma só vértices do croquis. O último vértice escolmado pode ser a orixe. - + Wrong solver status Erro no estado do resolvedor - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Un bloque de constrinxir non pode ser engadida se o esbozo non é resolto ou hai redundancias e/ou conflitos de constricións. - + Select one edge from the sketch. Escolmado dun bordo dende o esbozo. - + Select only edges from the sketch. Escolmado só de bordos dende esbozos. - - - - - - - + + + + + + + Error Erro - + Select two or more points from the sketch. Escolmar dous ou máis vértices do esbozo. - - + + Select two or more vertexes from the sketch. Escolmar dous ou máis vértices do esbozo. - - + + Constraint Substitution Substitución de Constrición - + Endpoint to endpoint tangency was applied instead. No seu lugar aplicouse a tanxencia de punto final ao punto final. - + Select vertexes from the sketch. Escolmar vértice(s) do esbozo. - - + + Select exactly one line or one point and one line or two points from the sketch. Escolme unicamente unha liña, unha liña mais un punto ou dous puntos do esbozo. - + Cannot add a length constraint on an axis! Non se pode engadir unha constrición de lonxitude nun eixo! - + This constraint does not make sense for non-linear curves Esta constrición non ten sentido para curvas non lineais - - - - - - + + + + + + Select the right things from the sketch. Escolmar as cousas correctas do esbozo. - - + + Point on B-spline edge currently unsupported. Punto sobre arista de B-spline non compatible polo momento. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ningún dos puntos escolmados foron limitados nas curvas respectivas, ben porque son partes dun mesmo elemento, ou ben porque os dous son de xeometría externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Escolme entre un punto e varias curvas, ou unha curva e varios puntos. Escolmou %1 curvas e %2 puntos. - - - - + + + + Select exactly one line or up to two points from the sketch. Escolme unicamente unha liña ou ata dous puntos do esbozo. - + Cannot add a horizontal length constraint on an axis! Non se pode engadir unha constrición de lonxitude horizontal nun eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Non se pode engadir unha constrición de coordenada X no punto de orixe! - - + + This constraint only makes sense on a line segment or a pair of points Esta constrición só ten sentido nun segmento de liña ou nun par de puntos - + Cannot add a vertical length constraint on an axis! Non se pode engadir unha constrición de lonxitude vertical nun eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Non se pode engadir unha constrición de coordenada Y no punto de orixe! - + Select two or more lines from the sketch. Escolmar dúas ou máis liñas do esbozo. - - + + Select at least two lines from the sketch. Escolmar polo menos dúas liñas do esbozo. - + Select a valid line Escolme unha liña válida - - + + The selected edge is not a valid line A aresta escolmada non é unha liña válida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2507,45 +2507,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas curvas mais un punto. - + Select some geometry from the sketch. perpendicular constraint Escolme algunha xeometría do esbozo. - + Wrong number of selected objects! perpendicular constraint Cantidade incorrecta de obxectos escolmados! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Con 3 obxectos, debe de haber 2 curvas e 1 punto. - - + + Cannot add a perpendicularity constraint at an unconnected point! Non se pode engadir unha constrición de perpendicularidade nun punto non conectado! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular a arista de B-spline non compatible polo momento. - - + + One of the selected edges should be a line. Unha das arestas escolmadas debe de ser unha liña. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2554,249 +2554,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas curvas mais un punto. - + Select some geometry from the sketch. tangent constraint Escolme algunha xeometría do esbozo. - + Wrong number of selected objects! tangent constraint Cantidade incorrecta de obxectos escolmados! - - - + + + Cannot add a tangency constraint at an unconnected point! Non se pode engadir unha constrición de tanxencia nun punto non conectado! - - - + + + Tangency to B-spline edge currently unsupported. Tanxencia sobre arista de B-spline non compatible polo momento. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Aplicouse a tanxencia de punto final a punto final. Borrouse a constrición coincidente. - - - - + + + + Select one or more arcs or circles from the sketch. Escolme un ou máis arcos ou círculos no esbozo. - - + + Constrain equal Constrinxir a igualdade - + Do you want to share the same radius for all selected elements? Quere compartir o mesmo raio para tódolos elementos escolmados? - - + + Constraint only applies to arcs or circles. Esta constrición só aplica a arcos ou círculos. - + Do you want to share the same diameter for all selected elements? Queres compartir o mesmo diámetro para tódolos elementos escolmados? - - + + Select one or two lines from the sketch. Or select two edges and a point. Escolme unha ou dúas liñas do esbozo. Ou escolme un punto e dúas arestas. - - + + Parallel lines Liñas paralelas - - + + An angle constraint cannot be set for two parallel lines. Unha constrición de ángulo non pode ser establecida por dúas liñas paralelas. - + Cannot add an angle constraint on an axis! Non se pode engadir unha constrición angular nun eixo! - + Select two edges from the sketch. Escolme dúas arestas do esbozo. - - + + Select two or more compatible edges Escolme dúas ou máis arestas compatibles - + Sketch axes cannot be used in equality constraints Os eixos do esbozo non se poden usar para unha constrición de igualdade - + Equality for B-spline edge currently unsupported. Igualdade para arista de B-Spline non compatible polo momento. - - + + Select two or more edges of similar type Escolme dúas ou máis arestas de tipo semellante - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Escolme dous puntos e unha liña de simetría, dous puntos e un punto de simetría ou unha liña e un punto de simetría do esbozo. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Non se pode engadir unha constrición de simetría entre unha liña e os seus puntos finais! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Escolme dous puntos finais de liñas para actuar como raios e unha aresta que represente un límite. O primeiro punto escolmado corresponde ó índice n1, o segundo ó n2 e o dato da referencia establece a relación n2/n1. - + Selected objects are not just geometry from one sketch. Os obxectos escolmados non son a xeometría dun esbozo unicamente. - + Number of selected objects is not 3 (is %1). A cantidade de obxectos escolmados non é 3 (é %1). - + Cannot create constraint with external geometry only!! Non se pode crear unha constrición só con xeometría externa!! - + Incompatible geometry is selected! ¡Escolmáronse xeometrías incompatibles! - + SnellsLaw on B-spline edge currently unsupported. Lei de Snell sobre arista de B-spline non compatible polo momento. - - + + Select at least one ellipse and one edge from the sketch. Escolme polo menos unha elipse e unha curva do esbozo. - + Sketch axes cannot be used in internal alignment constraint Os eixos do esbozo non se poden usar para unha constrición de aliñamento interno - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Non se pode constrinxir internamente unha elipse con outra elipse. Escolma só unha elipse. - - + + Maximum 2 points are supported. Son admitidos 2 puntos como máximo. - - + + Maximum 2 lines are supported. Son admitidas 2 liñas como máximo. - - + + Nothing to constrain Non hai nada para constrinxir - + Currently all internal geometry of the ellipse is already exposed. Actualmente, toda a xeometría interna da elipse está xa exposta. - - - - + + + + Extra elements Elementos adicionais - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Foron fornecidos máis elementos dos precisados para a elipse dada. Estes foron ignorados. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Non podes constrinxir internamente un arco de elipse noutro arco de elipse. Escolma só un arco de elipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Non podes constrinxir internamente unha elipse noutro arco de elipse. Escolma só unha elipse ou arco de elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Actualmente, toda a xeometría interna do arco de elipse está xa exposta. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Foron fornecidos máis elementos dos precisados para o arco de elipse dado. Estes foron ignorados. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actualmente a xeometría interna só é soportada para elipses ou arcos de elipse. O último elemento escolmado debe de ser unha elipse ou un arco de elipse. - - - - - + + + + + @@ -2804,7 +2804,7 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Escolma constrición(s) do esbozo. - + CAD Kernel Error Erro do Kernel CAD @@ -2939,42 +2939,42 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. A copia de carbón podería causar unha dependencia circular. - + This object is in another document. Este obxecto está noutro documento. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Este obxecto pertence a outra peza. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. O esbozo escolmado non é paralelo a este esbozo. Manteña pulsado Ctrl+Alt para permitir esbozos non paralelos. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Os eixos XY do croquis escolmado non teñen a mesma dirección neste croquis. Manteña pulsado Ctrl + Alt para ignoralo. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. A orixe do croquis escolmado non está aliñado ca orixe deste croquis. Manteña pulsado Ctrl + Alt para ignoralo. @@ -3060,8 +3060,8 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Inserir un raio - - + + Radius: Radio: @@ -3072,8 +3072,8 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Insire diámetro - - + + Diameter: Diámetro: @@ -3101,24 +3101,24 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Lonxitude: - - + + Change radius Trocar o raio - - + + Change diameter Trocar diámetro - + Refractive index ratio Índice de refracción - + Ratio n2/n1: Razón n2/n1: @@ -3134,22 +3134,22 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Ligar isto producirá dependencia circular. - + This object is in another document. Este obxecto está noutro documento. - + This object belongs to another body, can't link. Este obxecto pertence a outra peza, non se pode vincular. - + This object belongs to another part, can't link. Este obxecto pertence a outra peza, non se pode ligar. @@ -3190,8 +3190,8 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu SketcherGui::PropertyConstraintListItem - - + + Unnamed Sen nome @@ -3910,6 +3910,26 @@ Pola contra, non se atoparon constricións ligadas os cabos. All constraints that deal with external geometry were deleted. Tódalas constricións relacionadas coa xeometría externa foron desbotadas. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4256,70 +4276,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validación do esbozo - + Invalid constraints Constricións non válidas - - + + + Fix Corrixir - - + + + Find Buscar - + Delete constraints to external geom. Desbotar constricións á xeometría externa. - + Missing coincidences Coincidencias perdidas - + Tolerance: Tolerancia: - + Highlight open vertexes Salientar vértices abertos - + Ignore construction geometry Ignorar xeometría de construción + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Xeometría externa invertida - + Swap endpoints in constraints Trocar os puntos finais das constricións - + Constraint orientation locking Bloqueo da constrición de orientación - + Enable/Update Habilitar/Actualizar - + Disable Inhabilitar @@ -4327,104 +4354,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Esbozo non válido - + Do you want to open the sketch validation tool? Quere abrir a ferramenta de validación do esbozo? - + The sketch is invalid and cannot be edited. O esbozo non é válido e non se pode editar. - + Please remove the following constraint: Por favor, remova a seguinte constrición: - + Please remove at least one of the following constraints: Por favor, remova polo menos unha das seguintes constricións: - + Please remove the following redundant constraint: Por favor, remova a seguinte constrición redundante: - + Please remove the following redundant constraints: Por favor, remova a seguintes constricións redundantes: - + Empty sketch Esbozo baleiro - + Over-constrained sketch Esbozo constrinxido en exceso - - - + + + (click to select) (prema para escolmar) - + Sketch contains conflicting constraints O esbozo ten constricións en conflito - + Sketch contains redundant constraints O esbozo ten constricións redundantes - + Fully constrained sketch Esbozo totalmente constrinxido - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Resolvido en %1 segundos - + Unsolved (%1 sec) Non resolvido (%1 s.) @@ -4513,8 +4540,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa o diámetro dun círculo ou arco @@ -4522,8 +4549,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa o raio dun círculo ou arco @@ -4540,8 +4567,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Fai un arco mediante os seus puntos finais mais un punto calquera no arco @@ -4549,8 +4576,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Facer un círculo mediante 3 puntos no bordo @@ -4558,8 +4585,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Facer un arco mediante o centro mais os seus puntos finais @@ -4567,8 +4594,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Facer un arco de elipse mediante centro, raio maior e puntos finais @@ -4576,8 +4603,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Facer un arco de hipérbole mediante centro, raio maior e puntos finais @@ -4585,8 +4612,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Facer un arco de parábola mediante focos, vértice e puntos finais @@ -4594,13 +4621,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline por puntos de control - - + + Create a B-spline by control points Crea unha B-spline por puntos de control @@ -4608,8 +4635,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Facer un círculo mediante o centro mais un punto no bordo @@ -4617,8 +4644,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Facer unha elipse mediante periapse, apoapse e raio menor @@ -4626,8 +4653,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Facer unha elipse mediante centro, raio maior e un punto @@ -4635,8 +4662,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Facer un heptágono mediante o seu centro mais un vértice @@ -4644,8 +4671,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Facer un hexágono mediante o seu centro mais un vértice @@ -4653,14 +4680,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Facer un octógono mediante o seu centro mais un vértice - - + + Create a regular polygon by its center and by one corner Crea un polígono regular polo seu centro e por un vértice @@ -4668,8 +4695,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Facer un pentágono mediante o seu centro mais un vértice @@ -4677,8 +4704,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Facer un cadrado mediante o seu centro mais un vértice @@ -4686,8 +4713,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Facer un triángulo equilátero mediante o seu centro mais un vértice @@ -4695,13 +4722,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periódica por puntos de control - - + + Create a periodic B-spline by control points Crea unha B-spline periódica por puntos de control diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm index 07f441a60b..3c4785c72b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index fe449f447e..3a6afb3c10 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Skica - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Kopira geometriju drugu skicu @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Skica - + Constrain arc or circle Ograničiti luk ili krug - + Constrain an arc or a circle Ograniči luk ili krug - + Constrain radius Ograniči radijus - + Constrain diameter Ograniči promjer @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Skica - + Create arc Napravi luk - + Create an arc in the sketcher Stvaranje luka u skici - + Center and end points Centar i krajnje točke - + End points and rim point Krajnje točke i rubna točka @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Skica - + Create a B-spline Stvaranje B-spline - + Create a B-spline in the sketch Stvaranje B-spline skice @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Skica - + Create circle Napravi krug - + Create a circle in the sketcher Stvaranje kruga u skici - + Center and rim point Centar i rubna točka - + 3 rim points 3 rubne točke @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Skica - + Create a conic Stvori konusnu krivulju - + Create a conic in the sketch Stvaranje konusne krivulje u skici - + Ellipse by center, major radius, point Elipsa od: točke centra, točaka glavnih radijusa - + Ellipse by Periapsis, apoapsis, minor radius Elipsa od periapsis, apoapsis, manjeg polumjera - + Arc of ellipse by center, major radius, endpoints Luk elipse od centra, velikog radijusa, krajnje točke - + Arc of hyperbola by center, major radius, endpoints Luk hiperbole od centra, velikog radijusa, krajnje točke - + Arc of parabola by focus, vertex, endpoints Luk parabole od fokusa, tjemene točke, krajnje točke @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Skica - + Create regular polygon Stvorite pravilan poligon - + Create a regular polygon in the sketcher Stvorite pravilan poligon u skici - + Triangle Trokut - + Square Kvadrat - + Pentagon Peterokut - + Hexagon Šesterokut - + Heptagon Sedmerokut - + Octagon Osmerokut - + Regular Polygon Pravilan poligon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Skica - + Constrain angle Ograniči kut - + Fix the angle of a line or the angle between two lines Fiksiraj kut linije ili kut između dvije linije @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Skica - + Constrain Block Blok ograničenja - + Create a Block constraint on the selected item Stvaranje bloka ograničenja na odabrane stavke @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Skica - + Constrain coincident Ograničiti zajedničko - + Create a coincident constraint on the selected item Napravi zajedničko ograničenje na odabranim jedinicama @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Skica - + Constrain diameter Ograniči promjer - + Fix the diameter of a circle or an arc Popravi promjer kruga ili luka @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Skica - + Constrain distance Ograniči udaljenost - + Fix a length of a line or the distance between a line and a vertex Ograniči dužinu linije ili udaljenost između linije i vrha @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Skica - + Constrain horizontal distance Ograniči horizontalnu udaljenost - + Fix the horizontal distance between two points or line ends Ograniči horizontalnu udaljenost između dvije točke ili krajeva linije @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Skica - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Ograniči vertikalnu udaljenost između dvije točke ili krajeva linije @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Skica - + Constrain equal Ograniči jednaku duljinu - + Create an equality constraint between two lines or between circles and arcs Napravite ograničenje jednakosti između dvije linije ili između kružnica i lukova @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Skica - + Constrain horizontally Ograniči vodoravno - + Create a horizontal constraint on the selected item Napravi vodoravno ograničenje na odabranoj jedinici @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skica - + Constrain InternalAlignment Ograničavanje unutrašnjeg poravnavanja - + Constrains an element to be aligned with the internal geometry of another element Ograničava element da bude poravnat s unutarnjom geometrijom drugog elementa @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Skica - + Constrain lock Ograniči pomicanje - + Create a lock constraint on the selected item Napravi ograničenje fiksiranja na odabranim stavkama @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Skica - + Constrain parallel Ograniči paralelno - + Create a parallel constraint between two lines Napravi paralelno ograničenje između dvije linije @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Skica - + Constrain perpendicular Ograniči okomito - + Create a perpendicular constraint between two lines Stvara okomito ograničenje između dvije linije @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skica - + Constrain point onto object Ograniči točku na objekt - + Fix a point onto an object Fiksiraj točku na objekt @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Skica - + Constrain radius Ograniči radijus - + Fix the radius of a circle or an arc Fiksiraj radijus kruga ili luka @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skica - + Constrain refraction (Snell's law') Ograniči lom (Snell's zakon ') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Stvaranje zakona loma svijetla (Snell's law) ograničenje između dvije krajnje točke zrake i ruba kao sučelja. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Skica - + Constrain symmetrical Ograniči simetrijski - + Create a symmetry constraint between two points with respect to a line or a third point Stvoriti simerično ograničenje između dvije točke u odnosu na liniju ili treću točku @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Skica - + Constrain tangent Ograniči tangentno - + Create a tangent constraint between two entities Napravi tangentno ograničenje između dva entiteta @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Skica - + Constrain vertically Ograniči okomito - + Create a vertical constraint on the selected item Napravi okomito ograničenje na odabranoj jedinici @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Skica - + Create arc by three points Stvori luk kroz tri točke - + Create an arc by its end points and a point along the arc Stvaranje luka od svojih završnih točki i točke na luku @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Skica - + Create circle by three points Stvori krug kroz tri točke - + Create a circle by 3 perimeter points Stvori krug kroz tri obodne točke @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Skica - + Create arc by center Stvori luk od središta - + Create an arc by its center and by its end points Stvaranje luka od njegovog središta i njegovih krajnjih točaka @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Skica - + Create an arc of ellipse Stvaranje luka elipse - + Create an arc of ellipse in the sketch Stvaranje luka elipse u skici @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Skica - + Create an arc of hyperbola Stvaranje luka hiperbole - + Create an arc of hyperbola in the sketch Stvaranje luka hiperbole u skici @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Skica - + Create an arc of parabola Stvaranje luka parabole - + Create an arc of parabola in the sketch Stvaranje luka parabole u skici @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Skica - + Create B-spline Stvaranje B-spline - + Create a B-spline via control points in the sketch. Stvaranje B-spline krive putem kontrolnih točaka u skici. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Skica - + Create circle Napravi krug - + Create a circle in the sketch Napravi krug u skici @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Skica - + Create draft line Napravi liniju - + Create a draft line in the sketch Napravi liniju u skici @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Skica - + Create ellipse by 3 points Stvaranje elipse s 3 točke - + Create an ellipse by 3 points in the sketch Stvaranje elipse od 3 točke u skici @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Skica - + Create ellipse by center Stvaranje elipse od centra - + Create an ellipse by center in the sketch Stvaranje elipse od središta u skici @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Skica - + Create fillet Napravi obrub - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Skica - + Create heptagon Stvaranje sedmerokuta - + Create a heptagon in the sketch Stvaranje sedmerokuta u skici @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Skica - + Create hexagon Stvaranje šesterokut - + Create a hexagon in the sketch Stvaranje šestero kuta u skici @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Skica - + Create line Napravi liniju - + Create a line in the sketch Napravi liniju u skici @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Skica - + Create octagon Stvaranje osmerokuta - + Create an octagon in the sketch Stvaranje osmero kuta u skici @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Skica - + Create pentagon Stvaranje peterokuta - + Create a pentagon in the sketch Stvaranje petero kuta u skici @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Skica - + Create periodic B-spline Napravite periodične B-spline - + Create a periodic B-spline via control points in the sketch. Napravite periodične B-spline putem kontrolnih točaka u skici. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Skica - + Create point Napravi točku - + Create a point in the sketch Napravi točku u skici @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Skica - + Create polyline Napravi poli-liniju - + Create a polyline in the sketch. 'M' Key cycles behaviour Stvaranje i izlomljene crte u skici. 'M ' tipka mijenja ponašanje ciklusa @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Skica - + Create rectangle Napravi pravokutnik - + Create a rectangle in the sketch Napravi pravokutnik u skici @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Skica - + Create regular polygon Stvorite pravilan poligon - + Create a regular polygon in the sketch Stvorite pravilan poligon u skici @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Skica - + Create slot Napravite utor - + Create a slot in the sketch Stvorite otvor u skici @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Skica - + Create square Stvaranje kvadrata - + Create a square in the sketch Stvaranje kvadrata u skici @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Skica - + Create text Napravi tekst - + Create text in the sketch Napravi tekst u skici @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Skica - + Create equilateral triangle Stvaranje istostraničnog trokuta - + Create an equilateral triangle in the sketch Stvaranje jednostraničnih trokuta u skici @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Skica - + Extend edge Vanjski rub - + Extend an edge with respect to the picked position Proširiti rub u odnosu na pokupljenu poziciju @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Skica - + External geometry Vanjska geometrija - + Create an edge linked to an external geometry Kreiraj rub povezan sa vanjskom geometrijom @@ -1781,19 +1781,19 @@ CmdSketcherToggleActiveConstraint - + Sketcher Skica - + Toggle activate/deactivate constraint Prebaci aktivirati / isključiti ograničenje - + Toggles activate/deactivate state for selected constraints Prebaci aktivirati / isključiti status za odabrana ograničenja @@ -1820,17 +1820,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Skica - + Toggle reference/driving constraint Prebacuje referenca/ ograničenje promjene - + Toggles the toolbar or selected constraints to/from reference mode Prebacuje alatnu traku ili odabrana ograničenja u/iz referenca način korištenja @@ -1838,17 +1838,17 @@ CmdSketcherTrimming - + Sketcher Skica - + Trim edge Skrati rub - + Trim an edge with respect to the picked position Odreži dio ruba s obzirom na odabranu poziciju @@ -1955,47 +1955,47 @@ Automatsko ograničenje, pogreška: nerješiva skica nakon primjene izjednačavajućih ograničenja. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Nije moguće odrediti sjecište krivulje. Pokušajte dodati podudarno ograničenje između vrhova krivulje koju namjeravate obrubiti. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ova verzija ocean i/OCC ne podržava operacije čvora. Trebaš 6.9.0 ili noviju. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Indeks Geometrije (GeoID) je izvan granica. - + You are requesting no change in knot multiplicity. Vi zahtijevate: bez promjena u mnoštvu čvorova. - + The Geometry Index (GeoId) provided is not a B-spline curve. Indeks Geometrija (GeoId) pod uvjetom da nije B-spline krivulja. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Čvor indeks je izvan granica. Imajte na umu da u skladu s OCC notacijom, prvi čvor ima indeks 1 a ne nula. - + The multiplicity cannot be increased beyond the degree of the B-spline. Mnoštvo se ne može povećavati iznad stupanja mnoštva b-spline krive. - + The multiplicity cannot be decreased beyond zero. Mnoštvo se ne može smanjiti ispod nule. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC je uspio smanjiti mnoštvo unutar maksimalne tolerancije. @@ -2064,110 +2064,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2204,10 +2204,10 @@ Odaberite rub(ove) iz skice. - - - - + + + + Dimensional constraint Dimenzijonalno ograničenje @@ -2235,273 +2235,273 @@ Jedan od odabranih mora biti na skici - - + + Select an edge from the sketch. Odaberite rub skice. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Nemoguće ograničenje - - - - + + + + The selected edge is not a line segment Odabrani rub nije linija - - - - - - + + + + + + Double constraint Ograničenje dvaput - - - - + + + + The selected edge already has a horizontal constraint! Odabrani rub već ima vodoravno ograničenje! - - - - + + + + The selected edge already has a vertical constraint! Odabrani rub već ima okomito ograničenje! - - - - - - + + + + + + The selected edge already has a Block constraint! Odabrani rub već ima blok ograničenje! - + The selected item(s) can't accept a horizontal constraint! Odabrani objekt(i) ne mogu prihvatiti horizontalno ograničenje! - + There are more than one fixed point selected. Select a maximum of one fixed point! Odabrano više od jedne fiksne točke. Odaberite najviše jednu fiksnu točku! - + The selected item(s) can't accept a vertical constraint! Odabrani objekt(i) ne mogu prihvatiti vertikalno ograničenje! - + There are more than one fixed points selected. Select a maximum of one fixed point! Odabrano više od jedne fiksne točke. Odaberite najviše jednu fiksnu točku! - - + + Select vertices from the sketch. Odaberite samo vrhove sa skice. - + Select one vertex from the sketch other than the origin. Odaberite jednu vrh točku iz skice koja nije u ishodištu. - + Select only vertices from the sketch. The last selected vertex may be the origin. Odaberite samo krajnje točke skice. Posljednje odabrana tjemena točka je možda ishodište. - + Wrong solver status Pogrešan status alata za rješavanje (solver) - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Blok ograničenja ne može biti dodan ako skica nije riješena ili postoje redundantna i/ili proturječna ograničenja. - + Select one edge from the sketch. Odaberite jedan rub skice. - + Select only edges from the sketch. Odaberite samo rubove sa skice. - - - - - - - + + + + + + + Error Pogreška - + Select two or more points from the sketch. Odaberite dvije ili više točaka na skici. - - + + Select two or more vertexes from the sketch. Odaberite dva ili više tjemenih točaka na skici. - - + + Constraint Substitution Zamjena ograničenja - + Endpoint to endpoint tangency was applied instead. Tangenta od krajnje točka do krajnje točke je primijenjena umjesto toga. - + Select vertexes from the sketch. Odaberite vrhove sa skice. - - + + Select exactly one line or one point and one line or two points from the sketch. Odaberite točno jednu liniju ili jednu točku i jednu liniju ili dvije točke iz skice. - + Cannot add a length constraint on an axis! Ne možete dodati ograničenje duljine na osi! - + This constraint does not make sense for non-linear curves Ovo ograničenje nema smisla za nelinearne krivulje - - - - - - + + + + + + Select the right things from the sketch. Odaberite prave stvari sa skice. - - + + Point on B-spline edge currently unsupported. Točka na rubu B-spline krive trenutno nije podržana. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nijedna od odabranih točaka nije bila je ograničena na dotične krivulje, ili su dijelovi isti element, ili su oba vanjske geometrije. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Odaberite ili jednu točku i nekoliko krivulja, ili jednu krivulju i nekoliko točaka. Odabrali ste %1 krivulja i %2 točaka. - - - - + + + + Select exactly one line or up to two points from the sketch. Odaberite točno jednu liniju ili do dvije točke iz skice. - + Cannot add a horizontal length constraint on an axis! Nemoguće je dodati ograničenje duljine na os! - + Cannot add a fixed x-coordinate constraint on the origin point! Nije moguće dodati fiksno ograničenje X koordinate na izvornu točku! - - + + This constraint only makes sense on a line segment or a pair of points Ovo ograničenje samo ima smisla na segmentu crte ili paru točaka - + Cannot add a vertical length constraint on an axis! Nemoguće je dodati ograničenje duljine na os! - + Cannot add a fixed y-coordinate constraint on the origin point! Nije moguće dodati fiksno ograničenje Y koordinate na izvornu točku! - + Select two or more lines from the sketch. Odaberite dvije ili više linija iz skice. - - + + Select at least two lines from the sketch. Odaberite barem dvije linije iz skice. - + Select a valid line Odaberite valjanu liniju - - + + The selected edge is not a valid line Odabrani rub nije valjana linija - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2511,45 +2511,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije krajnje točke; dvije krivulje i točka. - + Select some geometry from the sketch. perpendicular constraint Odaberite neke geometrije sa skice. - + Wrong number of selected objects! perpendicular constraint Pogrešan broj odabranih objekata! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Sa 3 objekta, ondje mora biti 2 krivulje i 1 točka. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nemoguće je postaviti okomicu na nepovezanoj točki! - - - + + + Perpendicular to B-spline edge currently unsupported. Okomito na rub B-spline krive trenutno nije podržano. - - + + One of the selected edges should be a line. Jedan od doabranih rubova bi trebala biti linija. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2559,249 +2559,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije krajnje točke; dvije krivulje i točka. - + Select some geometry from the sketch. tangent constraint Odaberite neke geometrije sa skice. - + Wrong number of selected objects! tangent constraint Pogrešan broj odabranih objekata! - - - + + + Cannot add a tangency constraint at an unconnected point! Nemoguće je postaviti tangentu u nepovezanoj točki! - - - + + + Tangency to B-spline edge currently unsupported. Tangencijalno na rub B-Spline krive trenutno nije podržano. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Primijenjena je tangenta krajnja točka do krajnje točke. Podudarna ograničenja su izbrisana. - - - - + + + + Select one or more arcs or circles from the sketch. Odaberite jedan ili više lukova ili krugovima iz skice. - - + + Constrain equal Ograniči jednaku duljinu - + Do you want to share the same radius for all selected elements? Želite li staviti isti polumjer za sve odabrane elemente? - - + + Constraint only applies to arcs or circles. Ograničenje se odnosi samo na lukove i krugove. - + Do you want to share the same diameter for all selected elements? Želite li dijeliti isti promjer za sve odabrane elemente? - - + + Select one or two lines from the sketch. Or select two edges and a point. Odaberite jednu ili dvije linije na skici. Ili odaberite dva ruba i točku. - - + + Parallel lines Paralelne linije - - + + An angle constraint cannot be set for two parallel lines. Kut ograničenje ne može se postaviti za dvije paralelne linije. - + Cannot add an angle constraint on an axis! Nemoguće je dodati ograničenje kuta osi! - + Select two edges from the sketch. Odaberite dva ruba iz skice. - - + + Select two or more compatible edges Odaberite dva kompatibilna ruba - + Sketch axes cannot be used in equality constraints Koordinatne osi skice se ne mogu koristiti sa ograničenjem izjednačenja duljine - + Equality for B-spline edge currently unsupported. Izjednačavanje na rub B-Spline krive trenutno nije podržano. - - + + Select two or more edges of similar type Odaberite dva ili više ruba sličnog tipa - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Odaberite dvije točke i liniju simetrije, dvije točke i točku simetrije ili liniju i točku simetrije iz skice. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Nemoguće je postaviti simetriju između linije i njenih vrhova! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Odaberite dvije krajnje točke linije kao zrake, rub predstavlja granicu. Prva odabrana točka odgovara indeksu n1, druga indeksu n2 a vrijednost polazišta postavlja omjer na n2/n1. - + Selected objects are not just geometry from one sketch. Odabrani objekti nisu samo geometrije iz jedne skice. - + Number of selected objects is not 3 (is %1). Broj odabranih objekata nije 3 (nego %1). - + Cannot create constraint with external geometry only!! Nije moguće stvoriti ograničenja, osim onih s vanjskom geometrijom!! - + Incompatible geometry is selected! Nespojiva geometrije je odabrana! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw na B-spline trenutno nije podržano. - - + + Select at least one ellipse and one edge from the sketch. Odaberite barem jednu elipsu i jedan rub od skice. - + Sketch axes cannot be used in internal alignment constraint Skica osi ne može se koristiti za unutarnje ograničenje poravnavanja - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Ne možete interno ograničiti elipsu na druge elipse. Odaberite samo jednu elipsu. - - + + Maximum 2 points are supported. Maksimalno 2 točke su podržane. - - + + Maximum 2 lines are supported. Maksimalno 2 linije su podržane. - - + + Nothing to constrain Nema ništa za ograničiti - + Currently all internal geometry of the ellipse is already exposed. Trenutno sve unutarnje geometrije elipse su već izložene. - - - - + + + + Extra elements Dodatni elementi - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Dostavljeno je više elemenata nego je moguće za danu elipsu. Oni će biti zanemareni. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Ne možete interno ograničiti luk elipse na drugi luk elipse. Odaberite samo jedan luk elipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Ne možete interno ograničiti elipsu na luk elipse. Odaberite samo jedno, elipsu ili luk elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Trenutno sve unutarnje geometrije luka elipse su već izložene. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Dostavljeno je više elemenata nego je moguće za dani luk elipse. Oni će biti zanemareni. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Trenutno interna geometrija je podržana samo za elipsu i luk elipse. Posljednji odabrani element mora biti elipsa ili luk elipse. - - - - - + + + + + @@ -2809,7 +2809,7 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Odaberite objekt(e) sa skice. - + CAD Kernel Error CAD Kernel greška @@ -2944,42 +2944,42 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Kopija će izazvati kružne ovisnosti. - + This object is in another document. Ovaj objekt je u drugom dokumentu. - + This object belongs to another body. Hold Ctrl to allow cross-references. Ovaj objekt pripada drugom tijelu. Držite Ctrl kako bi se omogućile unakrsne reference. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Ovaj objekt pripada drugom tijelu i sadrži vanjsku geometriju. Unakrsne reference nisu dozvoljene. - + This object belongs to another part. Ovaj objekt pripada drugom dijelu. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Odabrana skica nije paralelna sa ovom skicom. Držite Ctrl + Alt za omogućavanje ne-paralelnih skica. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. XY osi odabrane skice nemaju isti smjer kao ova skica. Držite Ctrl + Alt za zanemarivanje ovoga. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Original odabrane skice nije usklađen sa ovom skicom. Držite Ctrl + Alt za zanemarivanje ovoga. @@ -3065,8 +3065,8 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Umetni polumjer - - + + Radius: Polumjer: @@ -3077,8 +3077,8 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Umetanje promjera - - + + Diameter: Promjer: @@ -3106,24 +3106,24 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Duljina: - - + + Change radius Promjeni polumjer - - + + Change diameter Promjena promjera - + Refractive index ratio Omjer indeksa loma - + Ratio n2/n1: Omjer n2/n1: @@ -3139,22 +3139,22 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Povezivanjem će te izazvati kružnu ovisnost. - + This object is in another document. Ovaj objekt je u drugom dokumentu. - + This object belongs to another body, can't link. Ovaj objekt pripada drugom tijelu, ne može se povezati. - + This object belongs to another part, can't link. Ovaj objekt pripada drugom djelu, ne može se povezati. @@ -3199,8 +3199,8 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije SketcherGui::PropertyConstraintListItem - - + + Unnamed Neimenovano @@ -3648,8 +3648,10 @@ Za stupanje na snagu zahtijeva ponovni ulazak u način uređivanja. Color of crosshair cursor. (The one you get when creating a new sketch element.) - Color of crosshair cursor. -(The one you get when creating a new sketch element.) + Boja pokazivača križića. +(Ona koju dobijete kada kreirate novi element skice.) + + @@ -3672,7 +3674,9 @@ Za stupanje na snagu zahtijeva ponovni ulazak u način uređivanja. A dialog will pop up to input a value for new dimensional constraints - A dialog will pop up to input a value for new dimensional constraints + Pojavit će se dijaloški okvir za unos vrijednosti za nova ograničenja dimenzije + + @@ -3687,7 +3691,9 @@ Za stupanje na snagu zahtijeva ponovni ulazak u način uređivanja. Current constraint creation tool will remain active after creation - Current constraint creation tool will remain active after creation + Trenutni alat za stvaranje ograničenja ostat će aktivan i nakon stvaranja + + @@ -3697,14 +3703,16 @@ Za stupanje na snagu zahtijeva ponovni ulazak u način uređivanja. Line pattern used for grid lines - Line pattern used for grid lines + Uzorak linije koji se koristi za linije mreže + + Base length units will not be displayed in constraints. Supports all unit systems except 'US customary' and 'Building US/Euro'. - Base length units will not be displayed in constraints. -Supports all unit systems except 'US customary' and 'Building US/Euro'. + Jedinice osnovne duljine neće se prikazivati ​​u ograničenjima. +Podržava sve jedinice jedinice, osim 'US customary' i "Izgradnja US / Euro". @@ -3734,7 +3742,9 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When opening sketch, show sources for external geometry links - When opening sketch, show sources for external geometry links + Prilikom otvaranja skice pokažite izvore za vanjske poveznice geometrije + + @@ -3744,7 +3754,9 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When opening sketch, show objects the sketch is attached to - When opening sketch, show objects the sketch is attached to + Prilikom otvaranja skice prikažite predmete na koje je skica pridružena + + @@ -3754,7 +3766,9 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When closing sketch, move camera back to where it was before sketch was opened - When closing sketch, move camera back to where it was before sketch was opened + Pri zatvaranju skice vratite kameru na mjesto gdje je bila prije otvaranja skice + + @@ -3769,7 +3783,9 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Applies current visibility automation settings to all sketches in open documents - Applies current visibility automation settings to all sketches in open documents + Primjenjuje trenutne postavke automatizacije vidljivosti na sve skice u otvorenim dokumentima + + @@ -3779,7 +3795,9 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Font size used for labels and constraints - Font size used for labels and constraints + Veličina slova koja se koristi za oznake i ograničenja + + @@ -3789,12 +3807,14 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Current sketcher creation tool will remain active after creation - Current sketcher creation tool will remain active after creation + Trenutni alat za izradu skica ostat će aktivan i nakon izrade + + Geometry creation "Continue Mode" - Geometry creation "Continue Mode" + Stvaranje Geometrija "Kontinuirani Mod" @@ -3804,7 +3824,8 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Number of polygons for geometry approximation - Number of polygons for geometry approximation + Broj poligona za geometrijsko približavanje + @@ -3931,6 +3952,26 @@ Međutim, nema povezanih ograničenja na krajnje točake. All constraints that deal with external geometry were deleted. Izbrisana su sva ograničenja koje se bave vanjskom geometrijom. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -3972,12 +4013,14 @@ Međutim, nema povezanih ograničenja na krajnje točake. Internal alignments will be hidden - Internal alignments will be hidden + Unutarnja poravnanja bit će skrivena + + Hide internal alignment - Hide internal alignment + Sakrij unutarnje poravnanje @@ -4066,7 +4109,7 @@ Međutim, nema povezanih ograničenja na krajnje točake. Only the type 'Edge' will be available for the list - Only the type 'Edge' will be available for the list + Za popis će biti dostupna samo vrsta 'Rub' @@ -4188,7 +4231,7 @@ Međutim, nema povezanih ograničenja na krajnje točake. A grid will be shown - A grid will be shown + Prikazat će se rešetka @@ -4203,14 +4246,18 @@ Međutim, nema povezanih ograničenja na krajnje točake. Distance between two subsequent grid lines - Distance between two subsequent grid lines + Udaljenost između dvije sljedeće linije rešetke + + New points will snap to the nearest grid line. Points must be set closer than a fifth of the grid size to a grid line to snap. - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid size to a grid line to snap. + Nove točke privući će se na najbliže linije rešetke. +Točke moraju biti postavljene bliže od petine razdaljine rešetke kako bi se privukle na liniju rešetke. + + @@ -4220,7 +4267,9 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher proposes automatically sensible constraints. - Sketcher proposes automatically sensible constraints. + Crtač predlaže automatski razumna ograničenja. + + @@ -4230,7 +4279,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher tries not to propose redundant auto constraints - Sketcher tries not to propose redundant auto constraints + Crtač pokušava ne predložiti suvišna automatska ograničenja @@ -4240,12 +4289,16 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Rendering order (global) : - Rendering order (global) : + Raspored iscratvanja (globalno): + + To change, drag and drop a geometry type to top or bottom - To change, drag and drop a geometry type to top or bottom + Da biste promijenili, povucite i ispustite vrstu geometrije prema vrhu ili dnu + + @@ -4277,70 +4330,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Provjera skice - + Invalid constraints Neispravna ograničenja - - + + + Fix Popravi - - + + + Find Pronađi - + Delete constraints to external geom. Brisanje ograničenja od vanjske geometrije. - + Missing coincidences Nema podudaranja - + Tolerance: Tolerancija: - + Highlight open vertexes Istaknuti tjemene točke - + Ignore construction geometry Zanemari geometriju konstrukcije + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Obrnuta vanjska geometrija - + Swap endpoints in constraints Zamijeni krajnje točke u ograničenja - + Constraint orientation locking Zaključavanje ograničenja orijentacije - + Enable/Update Omogući/Ažuriranje - + Disable Onemogući @@ -4348,104 +4408,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Uredi skicu - + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? - + Invalid sketch Neispravna skica - + Do you want to open the sketch validation tool? Želite li otvoriti alat provjera valjanosti skice? - + The sketch is invalid and cannot be edited. Skica je neispravna i ne može se uređivati. - + Please remove the following constraint: Molim uklonite sljedeće ograničenje: - + Please remove at least one of the following constraints: Molim uklonite barem jedno od sljedećih ograničenja: - + Please remove the following redundant constraint: Molimo obrišite ovo redundantno ograničenje: - + Please remove the following redundant constraints: Molimo obrišite ova redundantna ograničenja: - + Empty sketch Prazan skica - + Over-constrained sketch Iznad -Ograničena skica - - - + + + (click to select) (klikni za odabir) - + Sketch contains conflicting constraints Skica sadrži proturječna ograničenja - + Sketch contains redundant constraints Skica sadrži suvišna ograničenja - + Fully constrained sketch Potpuno ograničena skica - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom + Skica bez ograničenja <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stupnjeva</span></a> slobode - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom + Skica bez ograničenja sa <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 stupnjeva</span></a> slobode - + Solved in %1 sec Riješeno za %1 sek - + Unsolved (%1 sec) Neriješen (%1 sek) @@ -4534,8 +4594,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Popravi promjer kruga ili luka @@ -4543,8 +4603,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fiksiraj radijus kruga ili luka @@ -4561,8 +4621,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Stvaranje luka od svojih završnih točki i točke na luku @@ -4570,8 +4630,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Stvori krug kroz tri točke @@ -4579,8 +4639,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Stvaranje luka od njegovog središta i njegovih krajnjih točaka @@ -4588,8 +4648,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Stvaranje luka elipsa iz njegovog centra, velikog radijusa i krajnjih točaka @@ -4597,8 +4657,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Stvaranje luka hiperbole iz njegovog centra, velikog radijusa i krajnjih točaka @@ -4606,8 +4666,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Stvarane luka parabole iz fokusa, tjemene točke i krajnjih točaka @@ -4615,13 +4675,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline kriva kroz kontrolne točke - - + + Create a B-spline by control points Stvaranje B-splinekrive kroz kontrolne točke @@ -4629,8 +4689,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Stvaranje kruga od njegovog središta i njegovih točaka @@ -4638,8 +4698,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Elipsa od: periapsis, apoapsis, manjeg polumjera @@ -4647,8 +4707,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Elipsa od: točke centra, točaka glavnih radijusa @@ -4656,8 +4716,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Stvaranje heptagona (sedmerokuta) iz središta i jednog ugla @@ -4665,8 +4725,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Stvaranje heksagona iz središta i jednog ugla @@ -4674,14 +4734,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Stvaranje oktagona iz središta i jednog ugla - - + + Create a regular polygon by its center and by one corner Stvaranje pravilnog poligona iz središta i jednog ugla @@ -4689,8 +4749,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Stvaranje pentagona iz središta i jednog ugla @@ -4698,8 +4758,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Stvaranje kvadrata iz središta i jednog ugla @@ -4707,8 +4767,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Stvaranje istostraničnog trokuta iz središta i jednog ugla @@ -4716,13 +4776,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodična B-spline kriva kroz kontrolne točke - - + + Create a periodic B-spline by control points Stvaranje B-spline krive kroz kontrolne točke @@ -4861,7 +4921,9 @@ Do you want to detach it from the support? Executes a recomputation of active document after every sketch action - Executes a recomputation of active document after every sketch action + Izvršava preračunavanje aktivnog dokumenta nakon svake radnje skice + + @@ -4871,7 +4933,9 @@ Do you want to detach it from the support? Forces recomputation of active document - Forces recomputation of active document + Prisilna preračunavanje aktivnog dokumenta + + @@ -4901,9 +4965,11 @@ Do you want to detach it from the support? Solver is used for solving the geometry. LevenbergMarquardt and DogLeg are trust region optimization algorithms. BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm. - Solver is used for solving the geometry. -LevenbergMarquardt and DogLeg are trust region optimization algorithms. -BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm. + Alat za rješavanje se koristi za rješavanje geometrije. +LevenbergMarquardt i DogLeg su algoritmi za optimizaciju povjerenog područja. +BFGS solver koristi algoritam Broyden – Fletcher – Goldfarb – Shanno. + + @@ -4936,7 +5002,9 @@ BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm. Step type used in the DogLeg algorithm - Step type used in the DogLeg algorithm + Vrsta koraka koja se koristi u algoritmu DogLeg + + @@ -4961,26 +5029,27 @@ BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm. Maximum iterations: - Maximum iterations: + Maksimalna vrijednost ponavljanja: Maximum iterations to find convergence before solver is stopped - Maximum iterations to find convergence before solver is stopped + Maksimalna vrijednost ponavljanja za pronalaženje konvergencije prije zaustavljanja rješavanja + QR algorithm: - QR algorithm: + QR algoritam: During diagnosing the QR rank of matrix is calculated. Eigen Dense QR is a dense matrix QR with full pivoting; usually slower Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster - During diagnosing the QR rank of matrix is calculated. -Eigen Dense QR is a dense matrix QR with full pivoting; usually slower -Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster + Tijekom dijagnosticiranja izračunava se QR rang matrice. +Eigen Dense QR je QR guste matrice sa potpunim okretanjem; obično sporije +Eigen Sparse QR algoritam optimiziran je za rijetke matrice; obično brže @@ -4995,7 +5064,9 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Redundant max. iterations: - Redundant max. iterations: + Maksimalna prekomjerna vrijednost ponavljanja: + + @@ -5045,7 +5116,9 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Verbosity of console output - Verbosity of console output + Izvršavanja izlaza konzole + + @@ -5060,7 +5133,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Maximum iterations will be multiplied by number of parameters - Maximum iterations will be multiplied by number of parameters + Maksimalna vrijednost ponavljanja množit će se s brojem parametara @@ -5076,8 +5149,8 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Threshold for squared error that is used to determine whether a solution converges or not - Threshold for squared error that is used -to determine whether a solution converges or not + Prag za kvadratnu grešku koja se koristi +kako bi se utvrdilo konvergira li se rješenje ili ne diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm index 53757254ea..c45d93da47 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index 711d7c369b..45a18a0e7d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Vázlatkészítő - + CarbonCopy Másolat - + Copies the geometry of another sketch Másik vázlat geometriáinak másolatai @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Vázlatkészítő - + Constrain arc or circle Kör vagy körív kényszer - + Constrain an arc or a circle Egy kör vagy körív kényszerítése - + Constrain radius Sugár illesztés - + Constrain diameter Átmérő kényszer @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Vázlatkészítő - + Create arc Ív létrehozása - + Create an arc in the sketcher Ívet hoz létre a vázlatkészítőben - + Center and end points Közép és végpontok - + End points and rim point Végpontok és perem pont @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Vázlatkészítő - + Create a B-spline Hozzon létre egy B-görbét - + Create a B-spline in the sketch Hozzon létre egy B-görbét a vázlatban @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Vázlatkészítő - + Create circle Kör rajzolása - + Create a circle in the sketcher Kör létrehozása a vázlatkészítőben - + Center and rim point Közép- és a perem pont - + 3 rim points 3 perem pont @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Vázlatkészítő - + Create a conic Létrehoz egy kúp ívet - + Create a conic in the sketch Létrehoz egy kúp ívet a vázlaton - + Ellipse by center, major radius, point Ellipszis központtal, fő sugárral, ponttal - + Ellipse by Periapsis, apoapsis, minor radius Ellipszis periapsis-al, apoapsis-al, alárendelt sugárral - + Arc of ellipse by center, major radius, endpoints Ellipszis ív központtal, fő sugárral, végpontokkal - + Arc of hyperbola by center, major radius, endpoints Hiperbola ív központtal, fő sugárral, végpontokkal - + Arc of parabola by focus, vertex, endpoints Parabola fókusszal, csúcsponttal, végpontokkal @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Vázlatkészítő - + Create regular polygon Szabályos sokszög létrehozása - + Create a regular polygon in the sketcher Szabályos sokszög létrehozása a vázlatkészítőben - + Triangle Háromszög - + Square Négyzet - + Pentagon Ötszög - + Hexagon Hatszög - + Heptagon Hétszög - + Octagon Nyolcszög - + Regular Polygon Szabályos sokszög @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Vázlatkészítő - + Constrain angle Szög zárolása - + Fix the angle of a line or the angle between two lines Rögzítsen szöget a vonalon, vagy a szöget két vonalon @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Vázlatkészítő - + Constrain Block Blokk kényszerítés - + Create a Block constraint on the selected item Blokk kényszerítés létrehozása a kijelölt elemen @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Vázlatkészítő - + Constrain coincident Egymásra llesztés - + Create a coincident constraint on the selected item Kiválasztott elemeken létrehoz egy egymásra kényszerítést @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Vázlatkészítő - + Constrain diameter Átmérő kényszer - + Fix the diameter of a circle or an arc Rögzíteni egy kör vagy egy ív átmérőjét @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Vázlatkészítő - + Constrain distance Távolság kényszer - + Fix a length of a line or the distance between a line and a vertex Vonal hosszának rögzítése vagy adott távolság tartása a vonal és végpont között @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Vázlatkészítő - + Constrain horizontal distance Vízszintes távolság zárolása - + Fix the horizontal distance between two points or line ends Két pont közötti vagy vonal végek közötti vízszintes távolság zárolása @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Vázlatkészítő - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Két pont közötti vagy vonal végek közötti függőleges távolság zárolása @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Vázlatkészítő - + Constrain equal Illesztás megtartása - + Create an equality constraint between two lines or between circles and arcs Hozzon létre egy egyenlőség illesztést két vonal között, illetve körök és ívek között @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Vázlatkészítő - + Constrain horizontally Vízszintes illesztés - + Create a horizontal constraint on the selected item Vízszintes illesztés létrehozása a kiválasztott elemen @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Vázlatkészítő - + Constrain InternalAlignment BelsőIgazítás illesztése - + Constrains an element to be aligned with the internal geometry of another element Egy elemet illeszt egy másik elem belső geometriájához kényszerítéssel @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Vázlatkészítő - + Constrain lock Illesztés zárolása - + Create a lock constraint on the selected item A kijelölt elem illesztése @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Vázlatkészítő - + Constrain parallel Párhuzamosság tartása - + Create a parallel constraint between two lines Két vonal közötti párhuzamos kényszerítés @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Vázlatkészítő - + Constrain perpendicular Merőleges illesztés - + Create a perpendicular constraint between two lines Merőleges illesztést hoz létre két vonal közt @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Vázlatkészítő - + Constrain point onto object A pont illesztése a tárgyra - + Fix a point onto an object Pont rögzítése egy tárgyra @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Vázlatkészítő - + Constrain radius Sugár illesztés - + Fix the radius of a circle or an arc Sugár illesztése körre vagy ívre @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Vázlatkészítő - + Constrain refraction (Snell's law') Illesztés törésmutatója (Snellius–Descartes-törvény) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Létrehoz egy törésmutató törvény (Snellius–Descartes-törvény) illesztést két végpont és egy él, mint interfész, közt. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Vázlatkészítő - + Constrain symmetrical Szimmetria illesztés - + Create a symmetry constraint between two points with respect to a line or a third point Egy szimmetria illesztést hoz létre két pont közt, egy vonal vagy egy harmadik pont figyelembe vételével @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Vázlatkészítő - + Constrain tangent Érintő illesztés - + Create a tangent constraint between two entities Hozzon létre egy érintő illesztést két rész között @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Vázlatkészítő - + Constrain vertically Függőleges illesztés - + Create a vertical constraint on the selected item Függőleges kényszerítés alkalmazása a kijelölt elemen @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Vázlatkészítő - + Create arc by three points Ív létrehozása három ponttal - + Create an arc by its end points and a point along the arc Ívet hoz létre az ív végpontjaival és egy ív menti ponttal @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Vázlatkészítő - + Create circle by three points Kör létrehozása három ponttal - + Create a circle by 3 perimeter points Kör létrehozása 3 kerületi ponttal @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Vázlatkészítő - + Create arc by center Ív létrehozása középpont kijelöléssel - + Create an arc by its center and by its end points Ívet hoz létre a középpontjával és a végpontokkal @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Vázlatkészítő - + Create an arc of ellipse Létrehoz egy ellipszis ívet - + Create an arc of ellipse in the sketch Létrehoz egy ellipszis ívet a vázlaton @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Vázlatkészítő - + Create an arc of hyperbola Egy hiperbola ív létrehozása - + Create an arc of hyperbola in the sketch Létrehoz egy hiperbola ívet a vázlaton @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Vázlatkészítő - + Create an arc of parabola Egy parabola ív létrehozása - + Create an arc of parabola in the sketch Létrehoz egy parabola ívet a vázlaton @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Vázlatkészítő - + Create B-spline B-görbe létrehozása - + Create a B-spline via control points in the sketch. Létrehoz egy B-görbét ellenőrző ponttokkal a vázlaton. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Vázlatkészítő - + Create circle Kör rajzolása - + Create a circle in the sketch Kör rajzolása a vázlaton @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Vázlatkészítő - + Create draft line Vázlatvonal rajzolása - + Create a draft line in the sketch Vázlatvonal rajzolása a vázlaton @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Vázlatkészítő - + Create ellipse by 3 points Létrehoz egy 3 pontos ellipszist - + Create an ellipse by 3 points in the sketch Létrehoz egy 3 pontos ellipszist a vázlaton @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Vázlatkészítő - + Create ellipse by center Ellipszis létrehozása középponttal - + Create an ellipse by center in the sketch Ellipszis létrehozása középponttal a vázlaton @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Vázlatkészítő - + Create fillet Lekerekítés létrehozása - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Vázlatkészítő - + Create heptagon Hétszög létrehozása - + Create a heptagon in the sketch Egy hétszög létrehozása a vázlaton @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Vázlatkészítő - + Create hexagon Hatszög létrehozása - + Create a hexagon in the sketch Egy hatszög létrehozása a vázlaton @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Vázlatkészítő - + Create line Vonal rajzolása - + Create a line in the sketch Vonal rajzolása a vázlaton @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Vázlatkészítő - + Create octagon Nyolcszög létrehozása - + Create an octagon in the sketch Egy nyolcszög létrehozása a vázlaton @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Vázlatkészítő - + Create pentagon Ötszög létrehozása - + Create a pentagon in the sketch Egy ötszög létrehozása a vázlaton @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Vázlatkészítő - + Create periodic B-spline Időszakos B-görbe létrehozása - + Create a periodic B-spline via control points in the sketch. Létrehoz egy időszakos B-görbét ellenőrző ponttokkal a vázlaton. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Vázlatkészítő - + Create point Pont létrehozása - + Create a point in the sketch Pont létrehozása a vázlaton @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Vázlatkészítő - + Create polyline Vonallánc rajzolása - + Create a polyline in the sketch. 'M' Key cycles behaviour Vonallánc létrehozása a vázlatban. Az 'M' billentyűvel váltogathat a módok közt @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Vázlatkészítő - + Create rectangle Téglalap rajzolása - + Create a rectangle in the sketch Téglalap rajzolása a vázlaton @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Vázlatkészítő - + Create regular polygon Szabályos sokszög létrehozása - + Create a regular polygon in the sketch Egy szabályos sokszög létrehozása a vázlatban @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Vázlatkészítő - + Create slot Hozzon létre nyílást - + Create a slot in the sketch Hozzon létre egy nyílást a vázlatban @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Vázlatkészítő - + Create square Négyzet létrehozása - + Create a square in the sketch Egy négyszög létrehozása a vázlaton @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Vázlatkészítő - + Create text Szöveg létrehozása - + Create text in the sketch Szöveg létrehozása a vázlaton @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Vázlatkészítő - + Create equilateral triangle Egyenlő oldalú háromszög létrehozása - + Create an equilateral triangle in the sketch Egyenlő oldalú háromszög létrehozása a vázlaton @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Vázlatkészítő - + Extend edge Él meghosszabbítás - + Extend an edge with respect to the picked position Hosszabbítson meg egy élt a kiválasztott pozíció figyelembe vételével @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Vázlatkészítő - + External geometry Külső geometria - + Create an edge linked to an external geometry Hozzon létre egy szegélyt, csatolva a külső geometriához @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Vázlatkészítő - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Vázlatkészítő - + Toggle reference/driving constraint Referencia/megvezetési kényszerítés ki-/ bekapcsolása - + Toggles the toolbar or selected constraints to/from reference mode Váltja az eszköztárat vagy a kijelölt kényszerítést a hivatkozás módba/-ból @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Vázlatkészítő - + Trim edge Él vágása - + Trim an edge with respect to the picked position Él levágása, tekintettel a kiválasztott helyzetre @@ -1952,47 +1952,47 @@ Autókényszer hiba: megoldhatatlan vázlat egyenlőségi kényszer alkalmazása után. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Nem tudja meghatározni a görbék metszéspontját. Próbáljon meg hozzáadni egybeesés kényszerítést a görbék csúcsaihoz, melyeket le szeretné kerekíteni. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ez az OCE/OCC verzió nem támogatja a szög műveletet. 6.9.0 vagy magasabb verzió szükséges. - + BSpline Geometry Index (GeoID) is out of bounds. Bgörbe geometria Index (GeoID) nem rendelkezik kényszerítésekkel. - + You are requesting no change in knot multiplicity. Nem kér változtatást a csomó többszörözésére. - + The Geometry Index (GeoId) provided is not a B-spline curve. A megadott geometria Index (GeoId) nem egy Bgörbe. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. A csomó jelölés határvonalakon kívülre esik. Ne feledje, hogy a megfelelő OCC jelölés szerint, az első csomót jelölése 1 és nem nulla. - + The multiplicity cannot be increased beyond the degree of the B-spline. A sokszorozás nem nőhet a B-görbe szögének értéke fölé. - + The multiplicity cannot be decreased beyond zero. A sokszorozást nem csökkentheti nulla alá. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC képtelen csökkenteni a sokszorozást a maximális megengedett tűrésen belül. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ A kiválasztott él(ek) a vázlatból való. - - - - + + + + Dimensional constraint Méretezett illesztés @@ -2232,273 +2232,273 @@ Az egyik kiválasztottnak vázlaton kell lennie - - + + Select an edge from the sketch. Egy él kiválasztása a vázlaton. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Lehetetlen kényszerítés - - - - + + + + The selected edge is not a line segment A kiválasztott él nem egyenes szakasz - - - - - - + + + + + + Double constraint Kettős kényszerítés - - - - + + + + The selected edge already has a horizontal constraint! A kiválasztott él már rendelkezik egy vízszintes kényszerítéssel! - - - - + + + + The selected edge already has a vertical constraint! A kiválasztott él már rendelkezik egy függőleges kényszerítéssel! - - - - - - + + + + + + The selected edge already has a Block constraint! A kijelölt élnek már van blokk kényszerítése! - + The selected item(s) can't accept a horizontal constraint! A kiválasztott elem(ek) nem fogadják el a vízszintes illesztést! - + There are more than one fixed point selected. Select a maximum of one fixed point! Több mint egy rögzített pontot választott. Válasszon legfeljebb egy rögzített pontot! - + The selected item(s) can't accept a vertical constraint! A kiválasztott elem(ek) nem fogadják el a függőleges illesztést! - + There are more than one fixed points selected. Select a maximum of one fixed point! Több mint egy rögzített pontot választott. Válasszon legfeljebb egy rögzített pontot! - - + + Select vertices from the sketch. Válasszon sarkokat a vázlatból. - + Select one vertex from the sketch other than the origin. Jelöljön ki a vázlaton egy, a kiindulási ponttól eltérő, végpontot. - + Select only vertices from the sketch. The last selected vertex may be the origin. Csak sarkokat válasszon a vázlatból. Az utoljára kiválasztott végpont lehet a kezdőpont. - + Wrong solver status Rossz a megoldó állapota - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Egy blokk kényszerítést nem adhat hozzá, ha a vázlat megoldatlan vagy felesleges és/vagy ellentmondó kényszerítések vannak. - + Select one edge from the sketch. Válasszon egy élt a vázlaton. - + Select only edges from the sketch. Csak éleket válasszon a vázlaton. - - - - - - - + + + + + + + Error Hiba - + Select two or more points from the sketch. Jelöljön ki két vagy több pontot a vázlatból. - - + + Select two or more vertexes from the sketch. Jelöljön ki két vagy több csomópontok a vázlatból. - - + + Constraint Substitution Kényszerítés helyettesítés - + Endpoint to endpoint tangency was applied instead. Végpont-végpont érintőt alkalmazott helyette. - + Select vertexes from the sketch. Csomópont kiválasztása a vázlaton. - - + + Select exactly one line or one point and one line or two points from the sketch. Válasszon ki pontosan egy sort vagy egy pontot és egy sort és két pontot a vázlatból. - + Cannot add a length constraint on an axis! Nem adható hozzá a hosszanti illesztés egy tengelyen! - + This constraint does not make sense for non-linear curves Ennek a kényszerítésnek nincs értelme a lineáris görbéknél - - - - - - + + + + + + Select the right things from the sketch. Válassza ki a megfelelő dolgokat a vázlatból. - - + + Point on B-spline edge currently unsupported. B-görbe él pontja jelenleg nem támogatott. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. A kijelölt pontok egyike sincs kényszerítve a vonatkozó görbékhez, mert azok részei ugyanannak az elemnek, vagy azért, mert mindkét külső geometria. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Válasszon ki egy pontot és több görbét, vagy egy görbét és több pontot. %1 görbéket és a %2 pontokat választotta. - - - - + + + + Select exactly one line or up to two points from the sketch. Válasszon ki pontosan egy vonalat, vagy legfeljebb két pontot a vázlatból. - + Cannot add a horizontal length constraint on an axis! Nem lehet hozzáadni egy vízszintes hosszanti illesztést egy tengelyen! - + Cannot add a fixed x-coordinate constraint on the origin point! Nem adható hozzá a rögzített x-koordináta illesztése a kezdő ponthoz! - - + + This constraint only makes sense on a line segment or a pair of points Ez a kényszerítés csak egy vonalszakaszon vagy egy pont páron érvényesül - + Cannot add a vertical length constraint on an axis! Nem adható hozzá a függőleges hosszanti illesztés egy tengelyen! - + Cannot add a fixed y-coordinate constraint on the origin point! Nem adható hozzá a rögzített y-koordináta illesztése a kezdő ponthoz! - + Select two or more lines from the sketch. Válasszon ki két vagy több vonalat a vázlatból. - - + + Select at least two lines from the sketch. Válasszon ki legalább két vonalat a vázlatból. - + Select a valid line Válasszon ki egy érvényes vonalat - - + + The selected edge is not a valid line A kiválasztott él nem érvényes vonal - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpont; két görbe és egy pont. - + Select some geometry from the sketch. perpendicular constraint Válasszon ki néhány geometriát a vázlatból. - + Wrong number of selected objects! perpendicular constraint Kijelölt objektumok téves mennyisége! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3 tárggyal, két görbének és 1 pontnak kell lennie. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nem lehet hozzáadni a függőlegesség illesztést a független ponton! - - - + + + Perpendicular to B-spline edge currently unsupported. Merőleges a B-görbe élre, jelenleg nem támogatott. - - + + One of the selected edges should be a line. Az egyik kijelölt élnek egy vonalnak kell lennie. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpont; két görbe és egy pont. - + Select some geometry from the sketch. tangent constraint Válasszon ki néhány geometriát a vázlatból. - + Wrong number of selected objects! tangent constraint Kijelölt objektumok téves mennyisége! - - - + + + Cannot add a tangency constraint at an unconnected point! Nem lehet hozzáadni egy érintő illesztést a független ponton! - - - + + + Tangency to B-spline edge currently unsupported. Érintő B-görbe élével jelenleg nem támogatott. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Végpont-végpont érintőt alkalmazott. Az egybeeső kényszerítést törölve lett. - - - - + + + + Select one or more arcs or circles from the sketch. Válasszon egy vagy több ívet vagy kört a vázlatból. - - + + Constrain equal Illesztás megtartása - + Do you want to share the same radius for all selected elements? Az összes kijelölt elemre vonatkozólag ugyanolyan sugárt kívánt kiosztani? - - + + Constraint only applies to arcs or circles. Kényszerítés csak az ívekre és körökre vonatkozik. - + Do you want to share the same diameter for all selected elements? Az összes kijelölt elemre vonatkozólag ugyanolyan átmérőt kívánt kiosztani? - - + + Select one or two lines from the sketch. Or select two edges and a point. Válasszon egy vagy két vonalat a vázlatból. Vagy válasszon ki két élet és egy pontot. - - + + Parallel lines Párhuzamos vonalak - - + + An angle constraint cannot be set for two parallel lines. Egy szög kényszerítést nem lehet beállítani két párhuzamos vonalra. - + Cannot add an angle constraint on an axis! Nem lehet hozzáadni egy szög illesztést egy tengelyhez! - + Select two edges from the sketch. Két él kiválasztása a vázlaton. - - + + Select two or more compatible edges Két vagy több kompatibilis élt válasszon - + Sketch axes cannot be used in equality constraints Vázlat tengelyek nem használhatók egyenlőségi illesztéshez - + Equality for B-spline edge currently unsupported. Egyenlőség B-görbe élével jelenleg nem támogatott. - - + + Select two or more edges of similar type Jelöljön ki két vagy több hasonló élt - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Válasszon ki két pontot és egy szimmetria vonalat, két pontot és egy szimmetria pontot vagy egy vonalat és egy szimmetria pontot a vázlatból. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Nem lehet hozzáadni a szimmetria illesztést a vonalhoz és annak végpontjaihoz! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Válassza ki egy vonal két végpontját, amik sugarat fognak jelképezni, és egy élt ami a határvonal lesz. Az első kijelölt pontnak megfelel az index n1, a másodiknak az n2, és a méretadat állítja be az arányt n2/n1. - + Selected objects are not just geometry from one sketch. A kijelölt tárgyak nem csak egy vázlat geometriái. - + Number of selected objects is not 3 (is %1). A kijelölt tárgyak száma nem 3 (az %1). - + Cannot create constraint with external geometry only!! Nem hozhat létre kizárólag külső geometriából kényszerítést!! - + Incompatible geometry is selected! Inkompatibilis geometria van kijelölve! - + SnellsLaw on B-spline edge currently unsupported. SnellsTörv B-görbe élére jelenleg nem támogatott. - - + + Select at least one ellipse and one edge from the sketch. Válasszon legalább egy ellipszist és egy élt a vázlatból. - + Sketch axes cannot be used in internal alignment constraint Vázlat tengelyek nem használhatók belső kényszerítő igazításra - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Nem kényszeríthet belsőleg egy ellipszist egy másik ellipszishez. Csak egy ellipszist jelöljön be. - - + + Maximum 2 points are supported. Maximálisan 2 pontot támogatott. - - + + Maximum 2 lines are supported. Maximálisan 2 vonal támogatott. - - + + Nothing to constrain Nincs mit kényszaríteni - + Currently all internal geometry of the ellipse is already exposed. Jelenleg az ellipszis minden belső geometriája kihelyezett. - - - - + + + + Extra elements Extra elemek - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Lehetségesnél több elemet közölt a megadott ellipszisre. Ezek mellőzve lesznek. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Nem kényszeríthet belsőleg egy ellipszis ívet egy másik ellipszis ívhez. Csak egy ellipszis ívet jelöljön be. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Nem kényszeríthet egy ellipszis íven belsőleg egy ellipszist. Jelöljön csak egy ellipszist vagy ellipszis ívet. - + Currently all internal geometry of the arc of ellipse is already exposed. Jelenleg az ellipszis ív minden belső geometriája kihelyezett. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Lehetségesnél több elemet közölt a megadott ellipszisre. Ezek mellőzve lesznek. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Jelenleg csak az ellipszis vagy ellipszis íve belső geometriája támogatott. Az utolsó kiválasztott elemnek egy ellipszis vagy ellipszis ívnek kell lennie. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Jelölje ki a vázlatból a kényszerítés(eke)t. - + CAD Kernel Error CAD rendszermag hiba @@ -2941,42 +2941,42 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Másolás körkörös függőséget teremthet. - + This object is in another document. Ez az objektum egy másik dokumentumban van. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Ez az objektum egy másik alkatrészhez tartozik. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. A kiválasztott vázlat nem párhuzamos ezzel a vázlattal. Tartsa nyomva Ctrl+Alt a nem párhuzamos vázlatok engedélyezéséhez. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Az XY tengelyek a kiválasztott vázlaton nem egyeznek meg ennek a vázlatnak az irányával. Tartsa nyomva Ctrl+Alt ennek figyelmen kívül hagyásához. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. A kiválasztott vázlat kiinduló pontja nincs összhangban ennek a vázlatnak a kiinduló pontjával. Tartsa nyomva Ctrl+Alt ennek figyelmen kívül hagyásához. @@ -3062,8 +3062,8 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Sugár beillesztése - - + + Radius: Sugár: @@ -3074,8 +3074,8 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Átmérő beszúrása - - + + Diameter: Átmérő: @@ -3103,24 +3103,24 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Hossz: - - + + Change radius Sugár módosítása - - + + Change diameter Átmérő változtatása - + Refractive index ratio Refraktív index arány - + Ratio n2/n1: Arány n2/n1: @@ -3136,22 +3136,22 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Összekötése körkörös függőséget okoz. - + This object is in another document. Ez az objektum egy másik dokumentumban van. - + This object belongs to another body, can't link. Ez az objektum egy másik testhez tartozik, nem tudja csatolni. - + This object belongs to another part, can't link. Ez az objektum egy másik alkatrészhez tartozik, nem tudja csatolni. @@ -3192,8 +3192,8 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon SketcherGui::PropertyConstraintListItem - - + + Unnamed Névtelen @@ -3912,6 +3912,26 @@ Azonban, nem találhatók a végpontokhoz kötött kényszerítések.All constraints that deal with external geometry were deleted. Az összes külső geometriával foglalkozó kényszerítés törlésre került. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Vázlatkészítő érvényesítés - + Invalid constraints Érvénytelen illesztés - - + + + Fix Javítás - - + + + Find Keresés - + Delete constraints to external geom. Törli a külső geom. kényszerítést. - + Missing coincidences Hiányzó egybeesések - + Tolerance: Tűrés: - + Highlight open vertexes Jelölje ki a nyílt csomópontokat - + Ignore construction geometry Építési geometria elvetése + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Fordított külső geometria - + Swap endpoints in constraints Kényszerítés végpontjait cseréli fel - + Constraint orientation locking Kényszerítés orientáció zárolás - + Enable/Update Engedélyez/Frissít - + Disable Letilt @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Vázlat szerkesztése - + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? - + Invalid sketch Érvénytelen vázlat - + Do you want to open the sketch validation tool? Szeretné megnyitni a vázlat érvényesítés eszközt? - + The sketch is invalid and cannot be edited. A vázlat érvénytelen, és nem szerkeszthető. - + Please remove the following constraint: Kérjük, távolítsa el az alábbi ilesztést: - + Please remove at least one of the following constraints: Kérjük, távolítsa el, legalább az egyiket a következő kényszerítésekből: - + Please remove the following redundant constraint: Kérjük, távolítsa el a következő felesleges kényszerítést: - + Please remove the following redundant constraints: Kérjük, távolítsa el a következő felesleges kényszerítéseket: - + Empty sketch Üres vázlat - + Over-constrained sketch Túl sok illesztés tartalmazó vázlat - - - + + + (click to select) (kattintás a kijelöléshez) - + Sketch contains conflicting constraints Vázlat szabálytalan kényszerítéseket tartalmaz - + Sketch contains redundant constraints A vázlat felesleges kényszerítéseket tartalmaz - + Fully constrained sketch Teljesen zárolt vázlat - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Megoldva %1 másodperc alatt - + Unsolved (%1 sec) Megoldatlan (%1 mp) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Rögzíteni egy kör vagy egy ív átmérőjét @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Sugár illesztése körre vagy ívre @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Ívet hoz létre az ív végpontjaival és egy ív menti ponttal @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Kört hoz létre 3 határoló ponttal @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Ívet hoz létre a középpontjával és a végpontokkal @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Létrehoz egy ellipszis ívet a középpontjával, a fő sugarával, és végpontjaival @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Létrehoz egy hiperbola ívet a középpontjával, a fő sugarával, és végpontjaival @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Létrehoz egy parabola ívet fókusszal, csúcsponttal, végpontokkal @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-görbe ellenőrzési pontokkal - - + + Create a B-spline by control points Létrehoz egy B-görbét ellenőrzési pontokkal @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Kört hoz létre annak középpontjával és egy határoló ponttal @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Létrehoz egy ellipszist a peri apszis, apoapszis és mellék sugárból @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Létrehoz egy ellipszist a középpontból, a fő sugárból és pontból @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Létrehoz egy hétszöget a középpontból és egy sarokból @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Létrehoz egy hatszöget a középpontból és egy sarokból @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Létrehoz egy nyolcszöget a középpontból és egy sarokból - - + + Create a regular polygon by its center and by one corner Létrehoz egy egyszerű sokszöget a középpontból és egy sarokból @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Létrehoz egy ötszöget a középpontból és egy sarokból @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Létrehoz egy négyszöget a középpontból és egy sarokból @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Létrehoz egy egyenlő oldalú háromszöget a középpontból és egy sarokból @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Időszakos B-görbe ellenőrzési pontokkal - - + + Create a periodic B-spline by control points Létrehoz egy időszakos B-görbét ellenőrzési pontokkal diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm index 4494d12266..9d08ed46c9 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts index ac018a762c..f712b577b2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Kertas pengganda - + Copies the geometry of another sketch Salinan geometri sketsa lainnya @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Kendalikan radius - + Constrain diameter Constrain diameter @@ -210,28 +210,28 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Buat busur di sketsa & quot; "terjemahan =" Indonesia "> sketcher - + Center and end points Pusat dan titik akhir - + End points and rim point Titik akhir dan titik pelek @@ -239,17 +239,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Buat B-spline - + Create a B-spline in the sketch Buat B-spline di sketsa @@ -257,28 +257,28 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Buat lingkaran - + Create a circle in the sketcher Buat lingkaran dalam & quot; sketsa & quot; "terjemahan =" bahasa indonesia "> sketsa - + Center and rim point Pusat dan titik pelek - + 3 rim points 3 titik pelek @@ -286,42 +286,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Buat sebuah kerucut - + Create a conic in the sketch Buat kerucut di sketsa - + Ellipse by center, major radius, point Elips oleh pusat, radius utama, titik - + Ellipse by Periapsis, apoapsis, minor radius Elips oleh Periapsis, apoapsis, jari-jari kecil - + Arc of ellipse by center, major radius, endpoints Arc elips oleh pusat, radius utama, titik akhir - + Arc of hyperbola by center, major radius, endpoints Arc hiperbola oleh pusat, radius utama, titik akhir - + Arc of parabola by focus, vertex, endpoints Busur parabola dengan fokus, simpul, titik akhir @@ -329,52 +329,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Buat poligon biasa - + Create a regular polygon in the sketcher Membuat poligon beraturan di sketcher - + Triangle Segi tiga - + Square Kotak - + Pentagon Segi lima - + Hexagon Segi enam - + Heptagon Segi tujuh - + Octagon Segi delapan - + Regular Polygon Poligon beraturan @@ -428,17 +428,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Kendalikan sudut - + Fix the angle of a line or the angle between two lines Perbaiki sudut garis atau sudut antara dua garis @@ -446,17 +446,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Membatasi Block - + Create a Block constraint on the selected item Membuat batasan Block pada item terpilih @@ -464,17 +464,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Kendala bertepatan - + Create a coincident constraint on the selected item Buat kendala bertepatan pada item yang dipilih @@ -482,17 +482,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -500,17 +500,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Kendalikan jarak - + Fix a length of a line or the distance between a line and a vertex Perbaiki panjang garis atau jarak antara garis dan simpul @@ -518,17 +518,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Perbaiki jarak horizontal antara dua titik atau garis ujung @@ -536,17 +536,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Perbaiki jarak vertikal antara dua titik atau garis ujung @@ -554,17 +554,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Kendalikan sama - + Create an equality constraint between two lines or between circles and arcs Buat batasan kesetaraan antara dua garis atau antara lingkaran dan busur @@ -572,17 +572,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Kendalikan secara horisontal - + Create a horizontal constraint on the selected item Buat kendala horizontal pada item yang dipilih @@ -590,17 +590,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Kendalikan InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Kendalikan elemen yang harus disesuaikan dengan geometri internal elemen lain @@ -608,17 +608,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Kendalikan kunci - + Create a lock constraint on the selected item Buat batasan kunci pada item yang dipilih @@ -626,17 +626,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Kendalikan sejajar - + Create a parallel constraint between two lines Buat batasan paralel antara dua baris @@ -644,17 +644,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Kendalikan tegak lurus - + Create a perpendicular constraint between two lines Buat kendala tegak lurus antara dua garis @@ -662,17 +662,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Konstruksikan titik ke objek - + Fix a point onto an object Perbaiki sebuah titik pada sebuah objek @@ -680,17 +680,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Kendalikan radius - + Fix the radius of a circle or an arc Perbaiki jari-jari lingkaran atau busur @@ -698,17 +698,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Membekukan refraksi (hukum Snell ') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Buat undang-undang pembiasan (hukum Snell) di antara dua titik akhir sinar dan tepi sebagai antarmuka. @@ -716,17 +716,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Konstruksikan simetris - + Create a symmetry constraint between two points with respect to a line or a third point Buat batasan simetri antara dua titik dengan garis atau titik ketiga @@ -734,17 +734,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Kendalikan singgung - + Create a tangent constraint between two entities Buat kendala singgung antara dua entitas @@ -752,17 +752,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Kendalikan secara vertikal - + Create a vertical constraint on the selected item Buat kendala vertikal pada item yang dipilih @@ -806,17 +806,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Buat busur dengan tiga titik - + Create an arc by its end points and a point along the arc Buat busur dengan titik ujungnya dan satu titik di sepanjang busur @@ -824,17 +824,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Buat lingkaran dengan tiga titik - + Create a circle by 3 perimeter points Buat lingkaran dengan 3 titik perimeter @@ -842,17 +842,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Buat lingkaran dengan 3 titik perimeter - + Create an arc by its center and by its end points Buat busur dengan pusatnya dan pada titik ujungnya @@ -860,17 +860,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Buat busur elips - + Create an arc of ellipse in the sketch Buat busur elips di sketsa @@ -878,17 +878,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Buat busur hiperbola - + Create an arc of hyperbola in the sketch Buat busur hiperbola di sketsa @@ -896,17 +896,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Buat busur parabola - + Create an arc of parabola in the sketch Buat busur parabola di sketsa @@ -914,17 +914,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Buat B-spline - + Create a B-spline via control points in the sketch. Buat B-spline melalui titik kontrol pada sketsa. @@ -932,17 +932,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Buat lingkaran - + Create a circle in the sketch Buat B-spline lewat titik kontrol pada sketsa @@ -950,17 +950,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Buat & quot; Sketcher & quot; modul. Ada modul serupa & quot; Draft & quot; dan & quot; Menggambar & quot;, jadi hati-hati dengan kata-kata ini. "terjemahan =" konsep "> draf baris - + Create a draft line in the sketch Buat & quot; Sketcher & quot; modul. Ada modul serupa & quot; Draft & quot; n & quot; Menggambar & quot;, jadi hati-hati dengan kata-kata ini. "terjemahan =" konsep "> garis draf di sketsa @@ -968,17 +968,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Buat elips dengan 3 poin - + Create an ellipse by 3 points in the sketch Buat elips dengan 3 poin pada sketsa @@ -986,17 +986,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Buat elips menurut pusat - + Create an ellipse by center in the sketch Buat elips dengan pusat di sketsa @@ -1004,17 +1004,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Buat fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1022,17 +1022,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Buat heptagon - + Create a heptagon in the sketch Buat heptagon di sketsa @@ -1040,17 +1040,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Buat segi enam - + Create a hexagon in the sketch Buat segi enam di sketsa @@ -1058,17 +1058,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Buat baris - + Create a line in the sketch Create a line in the sketch @@ -1076,17 +1076,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Buat oktagon - + Create an octagon in the sketch Buat oktagon di sketsa @@ -1094,17 +1094,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Buat pentagon - + Create a pentagon in the sketch Buat pentagon di sketsa @@ -1112,17 +1112,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Buat B-spline periodik - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1130,17 +1130,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Buat titik - + Create a point in the sketch Buat sebuah titik di sketsa @@ -1148,17 +1148,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Buat polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1166,17 +1166,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Buat persegi panjang - + Create a rectangle in the sketch Buat persegi panjang di sketsa @@ -1184,17 +1184,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Buat poligon biasa - + Create a regular polygon in the sketch Membuat poligon beraturan di sketch @@ -1202,17 +1202,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Buat slot - + Create a slot in the sketch Buat slot di sketsa @@ -1220,17 +1220,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Buat kuadrat - + Create a square in the sketch Buat kotak di sketsa @@ -1238,17 +1238,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Buat teks - + Create text in the sketch Buat teks di sketsa @@ -1256,17 +1256,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Buat segitiga sama sisi - + Create an equilateral triangle in the sketch Buat segitiga sama sisi dalam sketsa @@ -1346,17 +1346,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Perluas tepi - + Extend an edge with respect to the picked position Perluas keunggulan sehubungan dengan posisi yang dipetik @@ -1364,17 +1364,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometri eksternal - + Create an edge linked to an external geometry Buat tepi yang terhubung dengan geometri eksternal @@ -1783,17 +1783,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1819,17 +1819,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Referensi google / kendala mengemudi - + Toggles the toolbar or selected constraints to/from reference mode Mengalihkan bilah alat atau batasan yang dipilih ke / dari mode referensi @@ -1837,17 +1837,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Trim tepi - + Trim an edge with respect to the picked position Potong tepi dengan memperhatikan posisi yang dipetik @@ -1954,47 +1954,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Bspline GeoId berada di luar batas. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indeks simpul berada di luar batas. Perhatikan bahwa sesuai dengan notasi OCC, simpul pertama memiliki indeks 1 dan bukan nol. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Multiplisitas tidak dapat ditingkatkan melampaui tingkat b-spline. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC tidak dapat mengurangi multiplisitas dalam toleransi maksimum. @@ -2063,110 +2063,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2203,10 +2203,10 @@ Pilih tepi dari sketsa. - - - - + + + + Dimensional constraint Batasan dimensi @@ -2234,273 +2234,273 @@ Salah satu yang terpilih harus ada di sketsa - - + + Select an edge from the sketch. Pilih tepi dari sketsa. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Kendala yang tidak mungkin - - - - + + + + The selected edge is not a line segment Salah satu yang terpilih harus ada di sketsa - - - - - - + + + + + + Double constraint Kendala ganda - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! The dipilih item (s) tidak dapat menerima horisontal kendala ! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Dipilih item (s) tidak dapat menerima vertikal kendala! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Pilih simpul dari para sketsa . - + Select one vertex from the sketch other than the origin. Pilih salah satu titik dari satu sketsa selain asal . - + Select only vertices from the sketch. The last selected vertex may be the origin. Pilih hanya simpul dari para sketsa . Yang terakhir dipilih vertex mungkin asal . - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Kesalahan - + Select two or more points from the sketch. Pilih dua atau lebih poin dari para sketsa . - - + + Select two or more vertexes from the sketch. Pilih dua atau lebih vertexes dari para sketsa . - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Pilih vertexes dari para sketsa . - - + + Select exactly one line or one point and one line or two points from the sketch. Pilih tepat satu baris atau satu titik dan satu garis atau dua poin dari para sketsa . - + Cannot add a length constraint on an axis! Tidak dapat menambahkan batasan panjang pada sumbu! - + This constraint does not make sense for non-linear curves Ini kendala tidak masuk akal untuk kurva non-linear - - - - - - + + + + + + Select the right things from the sketch. Pilih hal yang benar dari yang sketsa . - - + + Point on B-spline edge currently unsupported. Arahkan ke tepi B-spline yang saat ini tidak didukung. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Tak satu pun dari titik-titik yang dipilih dibatasi ke masing-masing kurva, entah karena mereka adalah bagian dari elemen yang sama, atau karena keduanya adalah geometri eksternal . - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Pilih salah satu titik dan beberapa kurva, atau satu kurva dan beberapa titik. Anda telah memilih kurva % 1 dan % 2 poin. - - - - + + + + Select exactly one line or up to two points from the sketch. Pilih tepat satu baris atau sampai dengan dua poin dari para sketsa . - + Cannot add a horizontal length constraint on an axis! Tidak dapat menambahkan batasan panjang horizontal pada sumbu! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Kendala ini hanya masuk akal pada segmen garis atau sepasang titik - + Cannot add a vertical length constraint on an axis! Tidak dapat menambahkan batasan panjang vertikal pada sumbu! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Pilih dua atau lebih baris dari para sketsa . - - + + Select at least two lines from the sketch. Pilih setidaknya dua baris dari para sketsa . - + Select a valid line Pilih baris yang valid - - + + The selected edge is not a valid line dipilih tepi bukan valid baris - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. perpendicular constraint Pilih beberapa geometri dari para sketsa . - + Wrong number of selected objects! perpendicular constraint Salah jumlah objek terpilih ! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Dengan 3 objek, harus ada 2 kurva dan 1 titik . - - + + Cannot add a perpendicularity constraint at an unconnected point! Tidak dapat menambahkan batasan tegak lurus pada titik yang tidak terhubung ! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular ke tepi B-spline saat ini tidak didukung. - - + + One of the selected edges should be a line. Salah satu tepi yang dipilih harus berupa garis . - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2554,249 +2554,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. tangent constraint Pilih beberapa geometri dari para sketsa . - + Wrong number of selected objects! tangent constraint Salah jumlah objek terpilih ! - - - + + + Cannot add a tangency constraint at an unconnected point! Tidak dapat menambahkan kendala singgung pada titik yang tidak terhubung ! - - - + + + Tangency to B-spline edge currently unsupported. Tangensi ke tepi B-spline saat ini tidak didukung. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Pilih satu atau lebih busur atau lingkaran dari para sketsa . - - + + Constrain equal Kendalikan sama - + Do you want to share the same radius for all selected elements? Apakah Anda ingin berbagi radius yang sama untuk semua elemen yang dipilih ? - - + + Constraint only applies to arcs or circles. Kendala hanya berlaku untuk busur atau lingkaran. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Pilih satu atau dua baris dari para sketsa . Atau pilih dua sisi dan satu titik . - - + + Parallel lines Garis sejajar - - + + An angle constraint cannot be set for two parallel lines. Kendala sudut tidak dapat diatur untuk dua garis sejajar. - + Cannot add an angle constraint on an axis! Tidak dapat menambahkan batasan sudut pada sumbu! - + Select two edges from the sketch. Pilih dua sisi dari satu sketsa . - - + + Select two or more compatible edges Pilih dua atau lebih tepi yang kompatibel - + Sketch axes cannot be used in equality constraints Sumbu sketsa tidak dapat digunakan dalam batasan kesetaraan - + Equality for B-spline edge currently unsupported. Kesetaraan untuk tepi B-spline saat ini tidak didukung. - - + + Select two or more edges of similar type Pilih dua atau lebih tepi tipe yang serupa - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Pilih dua poin dan simetri garis , dua poin dan simetri titik atau garis dan simetri titik dari yang sketsa . - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Tidak dapat menambahkan batasan simetri antara garis dan titik akhirnya! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Pilih dua titik akhir garis untuk bertindak sebagai sinar, dan tepi yang mewakili batas . Pertama yang dipilih titik sesuai dengan indeks n1, kedua - untuk n2, dan nilai datum menetapkan rasio n2 / n1. - + Selected objects are not just geometry from one sketch. Objek yang dipilih bukan hanya geometri dari satu sketsa . - + Number of selected objects is not 3 (is %1). Jumlah objek yang dipilih tidak 3 (adalah % 1 ). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Geometri tidak kompatibel dipilih ! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw pada tepi B-spline saat ini tidak didukung. - - + + Select at least one ellipse and one edge from the sketch. Pilih setidaknya satu elips dan satu ujung dari satu sketsa . - + Sketch axes cannot be used in internal alignment constraint Sumbu sketsa tidak dapat digunakan dalam batasan pelurusan internal - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Maksimal 2 poin didukung. - - + + Maximum 2 lines are supported. Maksimum 2 baris didukung. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Saat ini semua geometri internal elips sudah terbuka. - - - - + + + + Extra elements Elemen ekstra - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Lebih banyak elemen daripada yang mungkin diberikan pada elips yang diberikan. Ini diabaikan. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Saat ini semua geometri internal yang dari busur elips sudah terkena. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Elemen lebih dari mungkin untuk diberikan busur elips disediakan. Ini diabaikan. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Saat ini geometri internal hanya didukung elips atau busur elips. Elemen pilihan terakhir harus berupa elips atau busur elips. - - - - - + + + + + @@ -2804,7 +2804,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Pilih kendala (s) dari para sketsa . - + CAD Kernel Error Kernel CAD Error @@ -2939,42 +2939,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Salinan karbon akan menyebabkan ketergantungan melingkar. - + This object is in another document. Ini objek di lain dokumen . - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Objek ini termasuk bagian lain . - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Sumbu XY dari sketsa yang dipilih tidak memiliki arah yang sama dengan sketsa ini . Tahan Ctrl + Alt untuk mengabaikannya. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. asal dari yang dipilih sketsa tidak selaras dengan asal ini sketsa . Tahan Ctrl + Alt untuk mengabaikannya. @@ -3060,8 +3060,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sisipkan radius - - + + Radius: Radius: @@ -3072,8 +3072,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3101,24 +3101,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - - + + Change radius Ubah radius - - + + Change diameter Change diameter - + Refractive index ratio Rasio indeks bias - + Ratio n2/n1: Rasio n2 / n1: @@ -3134,22 +3134,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Menghubungkan ini akan menyebabkan ketergantungan melingkar. - + This object is in another document. Ini objek di lain dokumen . - + This object belongs to another body, can't link. Objek ini milik bodi lain , tidak bisa link . - + This object belongs to another part, can't link. Objek ini milik bagian lain , tidak bisa link . @@ -3190,8 +3190,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Tanpa nama @@ -3908,6 +3908,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Semua kendala yang berhubungan dengan geometri eksternal telah dihapus. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4254,70 +4274,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validasi sketcher - + Invalid constraints Kendala tidak valid - - + + + Fix Memperbaiki - - + + + Find Menemukan - + Delete constraints to external geom. Hapus kendala pada geom eksternal. - + Missing coincidences Kebetulan tidak ada - + Tolerance: Toleransi: - + Highlight open vertexes Sorot verteks terbuka - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Membalikkan geometri eksternal - + Swap endpoints in constraints Tukar titik akhir dalam batasan - + Constraint orientation locking Kendala penguncian orientasi - + Enable/Update Aktifkan / Perbarui - + Disable Nonaktifkan @@ -4325,104 +4352,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sketsa tidak valid - + Do you want to open the sketch validation tool? Apakah Anda ingin membuka alat validasi sketsa ? - + The sketch is invalid and cannot be edited. sketsa tidak valid dan tidak dapat diedit. - + Please remove the following constraint: Harap hapus batasan berikut : - + Please remove at least one of the following constraints: Harap hapus setidaknya satu dari batasan berikut: - + Please remove the following redundant constraint: Harap hapus batasan berlebihan berikut ini : - + Please remove the following redundant constraints: Harap hapus batasan berlebihan berikut ini : - + Empty sketch Sketsa kosong - + Over-constrained sketch Sketsa terlalu terbatas - - - + + + (click to select) (klik untuk memilih) - + Sketch contains conflicting constraints Sketsa berisi batasan yang saling bertentangan - + Sketch contains redundant constraints Sketsa berisi batasan yang berlebihan - + Fully constrained sketch Sketsa terbatas - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Dipecahkan dalam % 1 detik - + Unsolved (%1 sec) Tidak terpecahkan ( % 1 dtk) @@ -4511,8 +4538,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4520,8 +4547,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Perbaiki jari-jari lingkaran atau busur @@ -4538,8 +4565,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Buat busur dengan titik ujungnya dan satu titik di sepanjang busur @@ -4547,8 +4574,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Buat lingkaran dengan 3 titik pelek @@ -4556,8 +4583,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Buat busur dengan pusatnya dan pada titik ujungnya @@ -4565,8 +4592,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Buat busur elips dengan pusatnya, radius utama , titik akhir @@ -4574,8 +4601,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Buat busur hiperbola oleh pusatnya, radius utama , titik akhir @@ -4583,8 +4610,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Buat busur parabola dengan fokus, titik puncak , titik akhir @@ -4592,13 +4619,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline oleh titik kontrol - - + + Create a B-spline by control points Buat B-spline oleh titik kontrol @@ -4606,8 +4633,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Buat lingkaran di bagian tengahnya dan dengan titik pelek @@ -4615,8 +4642,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Buat elips dengan periapsis, apoapsis, dan jari-jari kecil @@ -4624,8 +4651,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Buat elips berdasarkan pusat, jari-jari dan titik utama @@ -4633,8 +4660,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Buat heptagon oleh pusatnya dan di satu sudut @@ -4642,8 +4669,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Buat segi enam dengan pusatnya dan di satu sudut @@ -4651,14 +4678,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Buat sebuah oktagon di tengahnya dan di satu sudut - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4666,8 +4693,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Buat pentagon di tengahnya dan di satu sudut @@ -4675,8 +4702,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Buat persegi di tengahnya dan di salah satu sudut @@ -4684,8 +4711,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Buat segitiga sama sisi dengan pusatnya dan di satu sudut @@ -4693,13 +4720,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periodik dengan titik kontrol - - + + Create a periodic B-spline by control points Buat B-spline periodik dengan titik kontrol diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index de75ef01bf..30f92a5140 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 4b581639f5..9f5a55da56 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Copia carbone - + Copies the geometry of another sketch Copia la geometria di un altro sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Vincola l'arco o il cerchio - + Constrain an arc or a circle Vincola l'arco o il cerchio - + Constrain radius Raggio - + Constrain diameter Vincola il diametro @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Arco - + Create an arc in the sketcher Crea un arco nello schizzo - + Center and end points Punti finali e centro - + End points and rim point Punti finali e punto sul cerchio @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Crea una B-spline - + Create a B-spline in the sketch Crea una B-spline nello schizzo @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Cerchio - + Create a circle in the sketcher Crea un cerchio nello schizzo - + Center and rim point Centro e punto sul cerchio - + 3 rim points 3 punti @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Sezione conica - + Create a conic in the sketch Crea una sezione conica nello schizzo - + Ellipse by center, major radius, point Ellisse da centro, raggio maggiore, punto - + Ellipse by Periapsis, apoapsis, minor radius Ellisse da periasse, apoasse, raggio minore - + Arc of ellipse by center, major radius, endpoints Arco di ellisse da centro, raggio maggiore, punti finali - + Arc of hyperbola by center, major radius, endpoints Arco di iperbole da centro, raggio maggiore, punti finali - + Arc of parabola by focus, vertex, endpoints Arco di parabola da fuoco, vertice e punti finali @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Poligono regolare - + Create a regular polygon in the sketcher Crea un poligono regolare nello schizzo - + Triangle Triangolo - + Square Quadrato - + Pentagon Pentagono - + Hexagon Esagono - + Heptagon Ettagono - + Octagon Ottagono - + Regular Polygon Poligono regolare @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Angolo - + Fix the angle of a line or the angle between two lines Fissa l'angolo di una linea o l'angolo tra due linee @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Fissa - + Create a Block constraint on the selected item Creare un vincolo di fissaggio sull'elemento selezionato @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Coincidenza - + Create a coincident constraint on the selected item Crea un vincolo di coincidenza sull'elemento selezionato @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Vincola il diametro - + Fix the diameter of a circle or an arc Vincola il diametro di un cerchio o di un arco @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Distanza - + Fix a length of a line or the distance between a line and a vertex Fissa la lunghezza di una linea o la distanza tra una linea e un vertice @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Distanza orizzontale - + Fix the horizontal distance between two points or line ends Fissa la distanza orizzontale tra due punti o estremi di una linea @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Distanza verticale - + Fix the vertical distance between two points or line ends Fissa la distanza verticale tra due punti o estremi di una linea @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Uguale - + Create an equality constraint between two lines or between circles and arcs Crea un vincolo di uguaglianza tra due linee o tra cerchi e archi @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Orizzontale - + Create a horizontal constraint on the selected item Crea un vincolo orizzontale sull'elemento selezionato @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Allineamento interno - + Constrains an element to be aligned with the internal geometry of another element Vincola un elemento a stare allineato con la geometria interna di un altro elemento @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Blocca - + Create a lock constraint on the selected item Crea un vincolo di blocco sull'elemento selezionato @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Parallelo - + Create a parallel constraint between two lines Crea un vincolo di parallelismo tra due linee @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Perpendicolare - + Create a perpendicular constraint between two lines Crea un vincolo di perpendicolarità tra due linee @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Punto su oggetto - + Fix a point onto an object Fissa un punto su un oggetto @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Raggio - + Fix the radius of a circle or an arc Fissa il raggio di un cerchio o di un arco @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Rifrazione (legge di Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Crea un vincolo di rifrazione (legge di Snell) tra due punti finali di raggi e con un bordo come interfaccia. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Simmetria - + Create a symmetry constraint between two points with respect to a line or a third point Crea un vincolo di simmetria tra due punti rispetto a una linea o un terzo punto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Tangente - + Create a tangent constraint between two entities Crea un vincolo di tangenza tra due entità @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Verticale - + Create a vertical constraint on the selected item Crea un vincolo verticale sull'elemento selezionato @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Arco da tre punti - + Create an arc by its end points and a point along the arc Crea un arco dai suoi punti finali e un punto lungo l'arco @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Cerchio da tre punti - + Create a circle by 3 perimeter points Crea un cerchio da punti perimetrali @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Arco dal centro - + Create an arc by its center and by its end points Crea un arco dal suo centro e dai suoi punti finali @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Arco di ellisse - + Create an arc of ellipse in the sketch Crea un arco di ellisse nello schizzo @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Crea un arco di iperbole - + Create an arc of hyperbola in the sketch Crea un arco di iperbole nello schizzo @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Arco di parabola - + Create an arc of parabola in the sketch Crea un arco di parabola nello schizzo @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline B-spline - + Create a B-spline via control points in the sketch. Crea una B-spline tramite punti di controllo nello schizzo. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Cerchio - + Create a circle in the sketch Crea un cerchio nello schizzo @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Linea di costruzione - + Create a draft line in the sketch Crea una linea di costruzione nello schizzo @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Ellisse da 3 punti - + Create an ellipse by 3 points in the sketch Crea nello schizzo un'ellisse da 3 punti @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Ellisse da centro - + Create an ellipse by center in the sketch Crea nello schizzo un'ellisse dal suo centro @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Raccorda - + Create a fillet between two lines or at a coincident point Crea un raccordo tra due linee o in un punto di coincidenza @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Ettagono - + Create a heptagon in the sketch Crea un ettagono nello schizzo @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Esagono - + Create a hexagon in the sketch Crea un esagono nello schizzo @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Linea - + Create a line in the sketch Crea una linea nello schizzo @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Ottagono - + Create an octagon in the sketch Crea un ottagono nello schizzo @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Pentagono - + Create a pentagon in the sketch Crea un pentagono nello schizzo @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline B-spline periodica - + Create a periodic B-spline via control points in the sketch. Crea una B-spline periodica tramite punti di controllo nello schizzo. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Punto - + Create a point in the sketch Crea un punto nello schizzo @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Polilinea - + Create a polyline in the sketch. 'M' Key cycles behaviour Crea una polilinea nello schizzo. 'M' per ripetere ciclicamente @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Rettangolo - + Create a rectangle in the sketch Crea un rettangolo nello schizzo @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Poligono regolare - + Create a regular polygon in the sketch Crea un poligono regolare nello schizzo @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Asola - + Create a slot in the sketch Crea un'asola nello schizzo @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Quadrato - + Create a square in the sketch Crea un quadrato nello schizzo @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Testo - + Create text in the sketch Crea un testo nello schizzo @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Triangolo equilatero - + Create an equilateral triangle in the sketch Crea un triangolo equilatero nello schizzo @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Estendi lo spigolo - + Extend an edge with respect to the picked position Estendi uno spigolo in riferimento alla posizione selezionata @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometria esterna - + Create an edge linked to an external geometry Crea un bordo collegato a una geometria esterna @@ -1566,12 +1566,12 @@ Reorient sketch... - Riorienta lo schizzo... + Riposiziona lo schizzo... Reorient the selected sketch - Riorienta lo schizzo selezionato + Rioposiziona lo schizzo selezionato @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Attiva/disattiva il vincolo - + Toggles activate/deactivate state for selected constraints Attiva/disattiva lo stato per i vincoli selezionati @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Vincoli Guida o Definitivi - + Toggles the toolbar or selected constraints to/from reference mode Commuta l'intera barra dei vincoli o i vincoli selezionati da Vincoli Guida o Indicativi in vincoli Definitivi, e viceversa @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Rifila - + Trim an edge with respect to the picked position Taglia un bordo nel punto specificato @@ -1952,47 +1952,47 @@ Errore di vincolo automatico: schizzo non risolvibile dopo l'applicazione dei vincoli di uguaglianza. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Impossibile determinare l'intersezione delle curve. Provare ad aggiungere un vincolo di coincidenza tra i vertici delle curve che si intende raccordare. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Questa versione di OCE/OCC non supporta l'operazione di nodo. Serve la versione 6.9.0 o superiore. - + BSpline Geometry Index (GeoID) is out of bounds. L'indice della geometria della B-spline (GeoID) è fuori limite. - + You are requesting no change in knot multiplicity. Non stai richiedendo modifiche nella molteplicità dei nodi. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'indice della geometria (GeoID) fornito non è una curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'indice del nodo è fuori dai limiti. Notare che, in conformità alla numerazione OCC, il primo nodo ha indice 1 e non zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La molteplicità non può essere aumentata oltre il grado della B-spline. - + The multiplicity cannot be decreased beyond zero. La molteplicità non può essere diminuita al di là di zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC non è in grado di diminuire la molteplicità entro la tolleranza massima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Seleziona bordo/i dello schizzo. - - - - + + + + Dimensional constraint Lunghezza @@ -2232,273 +2232,273 @@ Una delle entità selezionate deve essere nello schizzo - - + + Select an edge from the sketch. Seleziona un bordo dello schizzo. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Vincolo Impossible - - - - + + + + The selected edge is not a line segment Il bordo selezionato non è un segmento di linea - - - - - - + + + + + + Double constraint Doppio vincolo - - - - + + + + The selected edge already has a horizontal constraint! Il bordo selezionato ha già un vincolo orizzontale! - - - - + + + + The selected edge already has a vertical constraint! Il bordo selezionato ha già un vincolo verticale! - - - - - - + + + + + + The selected edge already has a Block constraint! Il bordo selezionato ha già un vincolo di fissaggio! - + The selected item(s) can't accept a horizontal constraint! Gli elementi selezionati non possono accettare un vincolo orizzontale! - + There are more than one fixed point selected. Select a maximum of one fixed point! Sono stati selezionati più punti bloccati. Selezionare al massimo un punto bloccato! - + The selected item(s) can't accept a vertical constraint! Gli elementi selezionati non possono accettare un vincolo verticale! - + There are more than one fixed points selected. Select a maximum of one fixed point! Sono stati selezionati più punti bloccati. Selezionare al massimo un punto bloccato! - - + + Select vertices from the sketch. Selezionare i vertici nello schizzo. - + Select one vertex from the sketch other than the origin. Selezionare dallo schizzo un vertice diverso dall'origine. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selezionare solo i vertici dallo schizzo. L'ultimo vertice selezionato può essere l'origine. - + Wrong solver status Stato del risolutore difettoso - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Se lo schizzo è irrisolto o ci sono dei vincoli ridondanti o in conflitto non si può aggiungere un vincolo di fissaggio. - + Select one edge from the sketch. Seleziona un bordo dello schizzo. - + Select only edges from the sketch. Selezionare solo i bordi dallo schizzo. - - - - - - - + + + + + + + Error Errore - + Select two or more points from the sketch. Selezionare due o più punti dallo schizzo. - - + + Select two or more vertexes from the sketch. Selezionare due o più vertici nello schizzo. - - + + Constraint Substitution Sostituzione Vincoli - + Endpoint to endpoint tangency was applied instead. È stata invece applicata la tangenza punto finale su punto finale. - + Select vertexes from the sketch. Selezionare vertici dello schizzo. - - + + Select exactly one line or one point and one line or two points from the sketch. Selezionare una linea o un punto più una linea, oppure due punti dello schizzo. - + Cannot add a length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza su un asse! - + This constraint does not make sense for non-linear curves Questo vincolo non ha senso per le curve non lineari - - - - - - + + + + + + Select the right things from the sketch. Selezionare le cose giuste dallo schizzo. - - + + Point on B-spline edge currently unsupported. Punto sul bordo di una B-spline attualmente non è supportato. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nessuno dei punti selezionati è stato vincolato sulla rispettiva curva, perchè essi sono parti dello stesso elemento, o perchè sono entrambi una geometria esterna. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Selezionare un punto e diverse curve, o una curva e diversi punti. Attualmente sono selezionati %1 curve e %2 punti. - - - - + + + + Select exactly one line or up to two points from the sketch. Selezionare solo una linea oppure al massimo due punti dello schizzo. - + Cannot add a horizontal length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza orizzontale su un asse! - + Cannot add a fixed x-coordinate constraint on the origin point! Non è possibile aggiungere un vincolo di coordinata x nel punto di origine! - - + + This constraint only makes sense on a line segment or a pair of points Questo vincolo ha senso solo su un segmento di linea o su due punti - + Cannot add a vertical length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza verticale su un asse! - + Cannot add a fixed y-coordinate constraint on the origin point! Non è possibile aggiungere un vincolo di coordinata y nel punto di origine! - + Select two or more lines from the sketch. Selezionare due o più linee dello schizzo. - - + + Select at least two lines from the sketch. Selezionare almeno due linee dello schizzo. - + Select a valid line Selezionare una linea valida - - + + The selected edge is not a valid line Il bordo selezionato non è una linea valida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. - + Select some geometry from the sketch. perpendicular constraint Selezionare alcune geometrie dello schizzo. - + Wrong number of selected objects! perpendicular constraint Numero di oggetti selezionati errato! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Con 3 oggetti, ci devono essere 2 curve e 1 punto. - - + + Cannot add a perpendicularity constraint at an unconnected point! Non è possibile aggiungere un vincolo di perpendicolarità in un punto non connesso! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicolare al bordo di una B-spline attualmente non è supportato. - - + + One of the selected edges should be a line. Uno degli spigoli selezionati deve essere una linea. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. - + Select some geometry from the sketch. tangent constraint Selezionare alcune geometrie dello schizzo. - + Wrong number of selected objects! tangent constraint Numero di oggetti selezionati errato! - - - + + + Cannot add a tangency constraint at an unconnected point! Non è possibile aggiungere un vincolo di tangenza in un punto non connesso! - - - + + + Tangency to B-spline edge currently unsupported. Tangente al bordo di una B-spline attualmente non è supportato. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. È stato applicato il vincolo tangenza punto finale su punto finale. È stato eliminato il vincolo coincidente. - - - - + + + + Select one or more arcs or circles from the sketch. Selezionare uno o più archi o cerchi nello schizzo. - - + + Constrain equal Uguale - + Do you want to share the same radius for all selected elements? Si desidera condividere lo stesso raggio per tutti gli elementi selezionati? - - + + Constraint only applies to arcs or circles. Vincolo applicato solo ad archi o cerchi. - + Do you want to share the same diameter for all selected elements? Si desidera condividere lo stesso diametro per tutti gli elementi selezionati? - - + + Select one or two lines from the sketch. Or select two edges and a point. Selezionare una o due linee dello schizzo, oppure selezionare due bordi e un punto. - - + + Parallel lines Linee parallele - - + + An angle constraint cannot be set for two parallel lines. Un vincolo di angolo non può essere impostato per due linee parallele. - + Cannot add an angle constraint on an axis! Non è possibile aggiungere un vincolo di angolo su un asse! - + Select two edges from the sketch. Selezionare due spigoli dello schizzo. - - + + Select two or more compatible edges Selezionare due o più spigoli compatibili - + Sketch axes cannot be used in equality constraints Gli assi dello schizzo non possono essere utilizzati nei vincoli di uguaglianza - + Equality for B-spline edge currently unsupported. Uguaglianza tra bordi di una B-spline attualmente non è supportato. - - + + Select two or more edges of similar type Selezionare due o più spigoli di tipo simile - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selezionare due punti e una linea di simmetria, o due punti e un punto di simmetria, o una linea e un punto di simmetria nello schizzo. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Non è possibile aggiungere un vincolo di simmetria tra una linea e i suoi estremi! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selezionare i due punti finali delle linee da usare come raggi e un bordo che rappresenta il limite. Il primo punto selezionato corrisponde all'indice n1, il secondo a n2 e il valore è definito dal rapporto n2/n1. - + Selected objects are not just geometry from one sketch. Gli oggetti selezionati non sono delle geometrie dello stesso schizzo. - + Number of selected objects is not 3 (is %1). Il numero di oggetti selezionati non è 3 (è %1). - + Cannot create constraint with external geometry only!! Impossibile creare il vincolo solo con la geometria esterna!! - + Incompatible geometry is selected! Le geometrie selezionate sono incompatibili! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw sul bordo di una B-spline attualmente non è supportato. - - + + Select at least one ellipse and one edge from the sketch. Selezionare almeno un'ellisse e un bordo dello schizzo. - + Sketch axes cannot be used in internal alignment constraint Gli assi dello schizzo non possono essere utilizzati nel vincolo di allineamento interno - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Non è possibile applicare il vincolo allineamento interno di un'ellisse su un'altra ellisse. Selezionare una sola ellisse. - - + + Maximum 2 points are supported. Sono supportati al massimo 2 punti. - - + + Maximum 2 lines are supported. Sono supportate al massimo 2 linee. - - + + Nothing to constrain Nulla da vincolare - + Currently all internal geometry of the ellipse is already exposed. Attualmente tutta la geometria interna dell'ellisse è già esposta. - - - - + + + + Extra elements Elementi aggiuntivi - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Per l'ellisse sono stati forniti più elementi di quanti sono possibili. Questi sono stati ignorati. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Non è possibile applicare il vincolo allineamento interno di un arco di ellisse su altri archi di ellisse. Selezionare un solo arco di ellisse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Non è possibile applicare il vincolo allineamento interno di un ellisse su un arco di ellisse. Selezionare un solo ellisse o un solo arco di ellisse. - + Currently all internal geometry of the arc of ellipse is already exposed. Attualmente tutta la geometria interna dell'arco di ellisse è già esposta. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Per l'arco di ellisse sono stati forniti più elementi di quanti sono possibili. Questi sono stati ignorati. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Attualmente la geometria interna è supportata solo per ellisse e arco di ellisse. L'ultimo elemento selezionato deve essere un ellisse o un arco di ellisse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Selezionare Vincolo(i) dallo schizzo. - + CAD Kernel Error Errore Kernel CAD @@ -2941,42 +2941,42 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Copia carbone causerebbe una dipendenza circolare. - + This object is in another document. Questo oggetto è in un altro documento. - + This object belongs to another body. Hold Ctrl to allow cross-references. Questo oggetto appartiene ad un altro corpo. Tenere premuto Ctrl per consentire i riferimenti incrociati. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Questo oggetto appartiene a un altro corpo e contiene della geometria esterna. Il riferimento incrociato non è consentito. - + This object belongs to another part. Questo oggetto appartiene a un'altra parte. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Lo schizzo selezionato non è parallelo a questo schizzo. Tenere premuto Ctrl + Alt per consentire schizzi non paralleli. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Gli assi XY dello schizzo selezionato non hanno la stessa direzione di questo schizzo. Tenere premuto Ctrl + Alt per ignorarlo. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. L'origine dello schizzo selezionato non è allineata con l'origine di questo schizzo. Tenere premuto Ctrl + Alt per ignorarlo. @@ -3062,8 +3062,8 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Inserire il raggio - - + + Radius: Raggio: @@ -3074,8 +3074,8 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Inserire diametro - - + + Diameter: Diametro: @@ -3103,24 +3103,24 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Lunghezza: - - + + Change radius Cambia il raggio - - + + Change diameter Cambia diametro - + Refractive index ratio Indice di rifrazione - + Ratio n2/n1: Rapporto n2/n1: @@ -3136,22 +3136,22 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Questo collegamento causerà una dipendenza circolare. - + This object is in another document. Questo oggetto è in un altro documento. - + This object belongs to another body, can't link. Questo oggetto appartiene ad un altro corpo, non è possibile collegarlo. - + This object belongs to another part, can't link. Questo oggetto appartiene a un'altra parte, non è possibile collegarlo. @@ -3192,8 +3192,8 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; SketcherGui::PropertyConstraintListItem - - + + Unnamed Senza nome @@ -3908,6 +3908,26 @@ Tuttavia, non sono stati trovati i vincoli che riguardano i punti finali.All constraints that deal with external geometry were deleted. Tutti i vincoli che trattano con la geometria esterna sono stati cancellati. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4254,70 +4274,77 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Convalida dello Sketcher - + Invalid constraints Vincoli non validi - - + + + Fix Ripara - - + + + Find Trova - + Delete constraints to external geom. Elimina i vincoli alla geometria esterna - + Missing coincidences Coincidenze mancanti - + Tolerance: Tolleranza: - + Highlight open vertexes Evidenzia i vertici aperti - + Ignore construction geometry Ignora la geometria di costruzione + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometria esterna reversa - + Swap endpoints in constraints Scambia i punti finali nei vincoli - + Constraint orientation locking Vincolo orientamento bloccato - + Enable/Update Abilita/aggiorna - + Disable Disabilita @@ -4325,104 +4352,104 @@ I punti devono essere impostati più vicino di un quinto della dimensione della SketcherGui::ViewProviderSketch - + Edit sketch Modifica lo schizzo - + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - + Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? - + Invalid sketch Schizzo non valido - + Do you want to open the sketch validation tool? Vuoi aprire lo strumento di convalida di schizzo? - + The sketch is invalid and cannot be edited. Lo schizzo non è valido e non può essere modificato. - + Please remove the following constraint: Si prega di rimuovere il seguente vincolo: - + Please remove at least one of the following constraints: Si prega di rimuovere almeno uno dei seguenti vincoli: - + Please remove the following redundant constraint: Si prega di rimuovere il seguente vincolo ridondante: - + Please remove the following redundant constraints: Si prega di rimuovere i seguenti vincoli ridondanti: - + Empty sketch Schizzo vuoto - + Over-constrained sketch Schizzo sovravincolato - - - + + + (click to select) (cliccare quì per selezionarli) - + Sketch contains conflicting constraints Lo schizzo contiene dei vincoli in conflitto - + Sketch contains redundant constraints Lo schizzo contiene dei vincoli ridondanti - + Fully constrained sketch Schizzo completamente vincolato - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Schizzo sottovincolato con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grado</span></a> di libertà - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Scizzo sottovincolato con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 gradi</span></a> di libertà - + Solved in %1 sec Risolto in %1 sec - + Unsolved (%1 sec) Non risolto (%1 sec) @@ -4511,8 +4538,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Vincola il diametro di un cerchio o di un arco @@ -4520,8 +4547,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fissa il raggio di un cerchio o di un arco @@ -4538,8 +4565,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Crea un arco dai suoi punti finali e un punto lungo l'arco @@ -4547,8 +4574,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Crea un cerchio da 3 punti del cerchio @@ -4556,8 +4583,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateArc - - + + Create an arc by its center and by its end points Crea un arco dal suo centro e dai suoi punti finali @@ -4565,8 +4592,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Crea un arco di ellisse dal suo centro, raggio principale, punti finali @@ -4574,8 +4601,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Crea un arco di iperbole dal suo centro, raggio principale, punti finali @@ -4583,8 +4610,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Crea un arco di parabola da fuoco, vertice e punti finali @@ -4592,13 +4619,13 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateBSpline - + B-spline by control points B-spline da punti di controllo - - + + Create a B-spline by control points Crea una B-spline dai punti di controllo @@ -4606,8 +4633,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Crea un cerchio dal suo centro e da un punto del cerchio @@ -4615,8 +4642,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Crea un ellisse da periasse, apoasse e raggio minore @@ -4624,8 +4651,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Crea un'ellisse da centro, raggio maggiore e punto @@ -4633,8 +4660,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Crea un ettagono dal suo centro e un vertice @@ -4642,8 +4669,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Crea un esagono dal suo centro e un vertice @@ -4651,14 +4678,14 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Crea un ottagono dal suo centro e un vertice - - + + Create a regular polygon by its center and by one corner Crea un poligono regolare dal suo centro e un vertice @@ -4666,8 +4693,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Crea un pentagono dal suo centro e un vertice @@ -4675,8 +4702,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateSquare - - + + Create a square by its center and by one corner Crea un quadrato dal suo centro e un vertice @@ -4684,8 +4711,8 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Crea un triangolo equilatero da centro e un vertice @@ -4693,13 +4720,13 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periodica dai punti di controllo - - + + Create a periodic B-spline by control points Crea una B-spline periodica dai punti di controllo @@ -4801,7 +4828,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Uno schizzo mappato su una faccia di supporto non può essere riorientato. Lo vuoi per separare dal supporto? + Uno schizzo mappato su una faccia di supporto non può essere riposizionato. Lo vuoi per separare dal supporto? diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm index acb7de9c8e..fc118adb19 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index 159b158212..4bb839194b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy カーボンコピー - + Copies the geometry of another sketch ジオメトリーを別のスケッチにコピー @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle 円弧や円を拘束する - + Constrain an arc or a circle 円弧や円を拘束する - + Constrain radius 半径拘束 - + Constrain diameter 直径拘束 @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc 円弧を作成 - + Create an arc in the sketcher スケッチに円弧を作成 - + Center and end points 中心点と端点 - + End points and rim point 端点と円周上の点から作成 @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline B-スプラインを作成 - + Create a B-spline in the sketch スケッチ上にB-スプラインを作成 @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle 円を作成 - + Create a circle in the sketcher スケッチに円を作成 - + Center and rim point 中心点と周上の点から円を作成 - + 3 rim points 円上の3点 @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic 円錐曲線を作成 - + Create a conic in the sketch スケッチに円錐曲線を作成 - + Ellipse by center, major radius, point 中心、長半径、点を指定して楕円を作成 - + Ellipse by Periapsis, apoapsis, minor radius 近点、遠点、短半径を指定して楕円を作成 - + Arc of ellipse by center, major radius, endpoints 中心、長半径、端点を指定して楕円の円弧を作成 - + Arc of hyperbola by center, major radius, endpoints 中心、長半径、端点からなる双曲線の円弧 - + Arc of parabola by focus, vertex, endpoints 焦点、頂点、端点を指定して放物線の円弧を作成 @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 正多角形を作成 - + Create a regular polygon in the sketcher スケッチャーで正多角形を作成 - + Triangle 三角形 - + Square 正方形 - + Pentagon 正五角形 - + Hexagon 六角形 - + Heptagon 七角形 - + Octagon 八角形 - + Regular Polygon 正多角形 @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle 角度を拘束 - + Fix the angle of a line or the angle between two lines 直線の角度または2直線間の角度を拘束 @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block ブロック拘束 - + Create a Block constraint on the selected item 選択されているアイテムに対してブロック拘束を作成 @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident 一致拘束 - + Create a coincident constraint on the selected item 選択されているアイテムに対して一致拘束を作成 @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter 直径拘束 - + Fix the diameter of a circle or an arc 円または円弧の直径を固定 @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance 距離拘束 - + Fix a length of a line or the distance between a line and a vertex 直線の長さまたは直線と節点の間の距離を拘束 @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance 水平距離拘束 - + Fix the horizontal distance between two points or line ends 2点間または直線端点間の水平距離を拘束 @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends 2点間または直線端点間の垂直距離を拘束 @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal 等値拘束 - + Create an equality constraint between two lines or between circles and arcs 2直線間または円と円弧間の等値拘束を作成 @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally 水平拘束 - + Create a horizontal constraint on the selected item 選択されているアイテムに対して水平拘束を作成 @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment 内部整列拘束 - + Constrains an element to be aligned with the internal geometry of another element 要素が他の要素の内部ジオメトリーと並ぶように拘束 @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock ロック拘束 - + Create a lock constraint on the selected item 選択されているアイテムに対してロック拘束を作成 @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel 平行拘束 - + Create a parallel constraint between two lines 2直線間の平行拘束を作成 @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular 直角拘束 - + Create a perpendicular constraint between two lines 2直線間の垂直拘束を作成 @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object オブジェクト上の点拘束 - + Fix a point onto an object 点をオブジェクト上に拘束 @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius 半径拘束 - + Fix the radius of a circle or an arc 円または円弧の半径を固定 @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') 屈折率（スネルの法則）を拘束 - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. 光線の2端点と境界のエッジの間に屈折の法則(スネル則の法則)による拘束を作成 @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical 対称拘束 - + Create a symmetry constraint between two points with respect to a line or a third point 線または第三点に対して、２点間の対称拘束を作成 @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent 正接拘束 - + Create a tangent constraint between two entities 2 つのエンティティ間に正接拘束を作成 @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically 垂直拘束 - + Create a vertical constraint on the selected item 選択されているアイテムに対して垂直拘束を作成 @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points 3点を指定して円弧を作成 - + Create an arc by its end points and a point along the arc 終点と円弧に上の点から円弧を作成 @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points 3点を指定して円を作成 - + Create a circle by 3 perimeter points 3つの境界点から円を作成 @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center 中心点から円弧を作成 - + Create an arc by its center and by its end points 中心と終点から円弧を作成 @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse 楕円弧を作成 - + Create an arc of ellipse in the sketch スケッチに楕円弧を作成します。 @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola 双曲線の円弧を作成 - + Create an arc of hyperbola in the sketch スケッチ上に双曲線の円弧を作成 @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola 放物線の円弧を作成 - + Create an arc of parabola in the sketch スケッチ上に放物線の円弧を作成 @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline B-スプラインを作成 - + Create a B-spline via control points in the sketch. スケッチの制御点からB-スプラインを作成 @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle 円を作成 - + Create a circle in the sketch スケッチ上に円を作成 @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line ドラフトラインの作成 - + Create a draft line in the sketch スケッチ上にドラフトラインを作成 @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points 3 点を指定して楕円を作成 - + Create an ellipse by 3 points in the sketch 3点を指定して楕円をスケッチに作成します。 @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center 中心点を指定して楕円を作成 - + Create an ellipse by center in the sketch 中心点を指定して楕円をスケッチに作成 @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet フィレットを作成 - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon 七角形を作成 - + Create a heptagon in the sketch スケッチに七角形を作成 @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon 六角形を作成 - + Create a hexagon in the sketch スケッチに六角形を作成 @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line 直線を作成 - + Create a line in the sketch スケッチ上に直線を作成 @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon 八角形を作成 - + Create an octagon in the sketch スケッチに八角形を作成します。 @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon 正五角形を作成 - + Create a pentagon in the sketch スケッチに五角形を作成します。 @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline 周期的なB-スプラインを作成 - + Create a periodic B-spline via control points in the sketch. スケッチの制御点から周期的なB-スプラインを作成 @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point 点を作成 - + Create a point in the sketch スケッチ上に点を作成 @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline ポリラインを作成 - + Create a polyline in the sketch. 'M' Key cycles behaviour スケッチにポリラインを作成。Mキーで挙動を切り替え。 @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle 長方形を作成 - + Create a rectangle in the sketch スケッチ上に長方形を作成 @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 正多角形を作成 - + Create a regular polygon in the sketch スケッチに正多角形を作成 @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot 長円形を作成 - + Create a slot in the sketch スケッチに長円を作成 @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square 正方形を作成 - + Create a square in the sketch スケッチに正方形を作成 @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text テキストを作成 - + Create text in the sketch スケッチ上にテキストを作成 @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle 正三角形を作成 - + Create an equilateral triangle in the sketch スケッチに正三角形を作成 @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge エッジを延長 - + Extend an edge with respect to the picked position ピックした位置でエッジを延長 @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry 外部ジオメトリー - + Create an edge linked to an external geometry 外部形状にリンクするエッジを作成 @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint 拘束のアクティブ/非アクティブを切り替え - + Toggles activate/deactivate state for selected constraints 選択した拘束のアクティブ/非アクティブの状態を切り替え @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint 拘束の参照/能動を切り替え - + Toggles the toolbar or selected constraints to/from reference mode ツールバーまたは選択した拘束を参照モードと切り替える @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge エッジをトリム - + Trim an edge with respect to the picked position ピックされている位置に従ってエッジをトリム @@ -1952,47 +1952,47 @@ 自動拘束エラー: 等値拘束の適用後にスケッチの求解に失敗しました。 - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. 曲線の交点を推定できません。フィレット対象の曲線の頂点の間に一致拘束を追加してみてください。 - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. このバージョンの OCE/OCC はノット操作をサポートしていません。バージョン 6.9.0 以上が必要です。 - + BSpline Geometry Index (GeoID) is out of bounds. B-スプラインのジオメトリー番号（ジオID）が範囲外です。 - + You are requesting no change in knot multiplicity. ノット多重度で変更が起きないように要求しています。 - + The Geometry Index (GeoId) provided is not a B-spline curve. 入力されたジオメトリー番号（ジオID）がB-スプライン曲線になりません。 - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. ノット・インデックスが境界外です。OCCの記法に従うと最初のノットは1と非ゼロのインデックスを持ちます。 - + The multiplicity cannot be increased beyond the degree of the B-spline. B-スプラインの次数を越えて多重度を増やすことはできません。 - + The multiplicity cannot be decreased beyond zero. 0を越えて多重度を減らすことはできません。 - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCCは最大許容範囲内で多重度を減らすことができまぜん。 @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ スケッチからエッジを選択（複数可） - - - - + + + + Dimensional constraint 寸法拘束 @@ -2232,273 +2232,273 @@ 選択されているアイテムの1つがスケッチ上にある必要があります - - + + Select an edge from the sketch. スケッチからエッジを選択 - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint 拘束不可 - - - - + + + + The selected edge is not a line segment 選択したエッジは線分ではありません - - - - - - + + + + + + Double constraint 二重拘束 - - - - + + + + The selected edge already has a horizontal constraint! 選択されたエッジにはすでに水平拘束が設定されています！ - - - - + + + + The selected edge already has a vertical constraint! 選択されたエッジにはすでに垂直拘束が設定されています！ - - - - - - + + + + + + The selected edge already has a Block constraint! 選択されたエッジにはすでにブロック拘束が設定されています！ - + The selected item(s) can't accept a horizontal constraint! 選択されているアイテムは水平拘束出来ません！ - + There are more than one fixed point selected. Select a maximum of one fixed point! 複数の固定点が選択されています。固定点を1つだけ選択してください！ - + The selected item(s) can't accept a vertical constraint! 選択されているアイテムは垂直拘束出来ません！ - + There are more than one fixed points selected. Select a maximum of one fixed point! 複数の固定点が選択されています。固定点を1つだけ選択してください！ - - + + Select vertices from the sketch. スケッチから頂点を選択 - + Select one vertex from the sketch other than the origin. スケッチから原点以外の節点を 1 つ選択します。 - + Select only vertices from the sketch. The last selected vertex may be the origin. スケッチから頂点のみを選択してください。最後に選択された頂点は原点になります。 - + Wrong solver status 不適切なソルバー状態 - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. スケッチが求解されていない場合や冗長/競合する拘束がある場合はブロック拘束を追加できません。 - + Select one edge from the sketch. スケッチから1本のエッジを選択 - + Select only edges from the sketch. スケッチからエッジのみを選択 - - - - - - - + + + + + + + Error エラー - + Select two or more points from the sketch. スケッチから2点以上の節点を選択 - - + + Select two or more vertexes from the sketch. スケッチから2点以上の節点を選択してください。 - - + + Constraint Substitution 拘束代入 - + Endpoint to endpoint tangency was applied instead. 代わりに端点間の正接拘束が適用されました。 - + Select vertexes from the sketch. スケッチから節点を選択してください - - + + Select exactly one line or one point and one line or two points from the sketch. スケッチから1直線または1点と1直線または2点を選択してください - + Cannot add a length constraint on an axis! 軸に対して長さ拘束を追加することはできません！ - + This constraint does not make sense for non-linear curves この拘束は非線形な曲線に対して無効です - - - - - - + + + + + + Select the right things from the sketch. スケッチから正しい対象を選択してください。 - - + + Point on B-spline edge currently unsupported. B-スプラインエッジの点拘束は現在サポートされていません。 - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 選択した点をそれぞれの曲線上に拘束することができません。同じ要素のパーツであるか、両方とも外部ジオメトリーであることが原因です。 - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. １点と複数の曲線、または1つの曲線と複数の点を選択してください。 %1 個の曲線と %2 個の点が選択されています。 - - - - + + + + Select exactly one line or up to two points from the sketch. スケッチから1直線または2つ以下の点を選択してください - + Cannot add a horizontal length constraint on an axis! 軸に対して水平距離拘束を追加することはできません！ - + Cannot add a fixed x-coordinate constraint on the origin point! 原点に対してX座標を固定する拘束を追加することはできません！ - - + + This constraint only makes sense on a line segment or a pair of points この拘束は1線分または点ペアに対してのみ有効です - + Cannot add a vertical length constraint on an axis! 軸に対して垂直距離拘束を追加することはできません！ - + Cannot add a fixed y-coordinate constraint on the origin point! 原点に対してY座標を固定する拘束を追加することはできません！ - + Select two or more lines from the sketch. スケッチから2本以上の直線を選択してください - - + + Select at least two lines from the sketch. スケッチから2本以上の直線を選択してください - + Select a valid line 有効な直線を選択してください - - + + The selected edge is not a valid line 選択されたエッジは有効な直線ではありません - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可能な組み合わせ： 2曲線; 1端点と1曲線; 2端点; 2曲線と1点 - + Select some geometry from the sketch. perpendicular constraint スケッチから幾つかのジオメトリを選択してください。 - + Wrong number of selected objects! perpendicular constraint 選択したオブジェクトの数が正しくありません ！ - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 使用される3オブジェクトは2つの曲線と1つの点である必要があります。 - - + + Cannot add a perpendicularity constraint at an unconnected point! 接続していない点に対して垂直拘束を追加することはできません！ - - - + + + Perpendicular to B-spline edge currently unsupported. B-スプラインエッジの直角拘束は現在サポートされていません。 - - + + One of the selected edges should be a line. 選択されているエッジの1つが直線である必要があります - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可能な組み合わせ: 2曲線; 端点と曲線; 2端点; 2曲線と1点 - + Select some geometry from the sketch. tangent constraint スケッチから幾つかのジオメトリを選択してください。 - + Wrong number of selected objects! tangent constraint 選択したオブジェクトの数が正しくありません ！ - - - + + + Cannot add a tangency constraint at an unconnected point! 接続されていない点に対して正接拘束を追加することはできません！ - - - + + + Tangency to B-spline edge currently unsupported. B-スプラインエッジの正接拘束は現在サポートされていません。 - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 端点間の正接拘束が適用されました。一致拘束は削除されました。 - - - - + + + + Select one or more arcs or circles from the sketch. スケッチから 1 つ以上の円弧または円を選択してください。 - - + + Constrain equal 等値拘束 - + Do you want to share the same radius for all selected elements? すべての選択された要素で同じ半径を使用しますか？ - - + + Constraint only applies to arcs or circles. 円弧または円のみに適用される拘束です。 - + Do you want to share the same diameter for all selected elements? すべての選択された要素で同じ直径を使用しますか？ - - + + Select one or two lines from the sketch. Or select two edges and a point. スケッチから1本か2本の線分を選択してください。あるいは2つのエッジと頂点を選択します。 - - + + Parallel lines 平行線 - - + + An angle constraint cannot be set for two parallel lines. ２つの平行線に角度拘束を設定できません。 - + Cannot add an angle constraint on an axis! 軸に対して角度拘束を追加することはできません！ - + Select two edges from the sketch. スケッチから2本のエッジを選択してください - - + + Select two or more compatible edges 2本以上の交換可能なエッジを選択してください - + Sketch axes cannot be used in equality constraints スケッチの軸を等値拘束に使用することはできません - + Equality for B-spline edge currently unsupported. B-スプラインエッジの等値拘束は現在サポートされていません。 - - + + Select two or more edges of similar type 同じタイプのエッジを2本以上選択してください - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 2つの点と対称線、2つの点と対称点、あるいは1本の直線と対称点をスケッチから選択してください。 - - - - + + + + Cannot add a symmetry constraint between a line and its end points! 直線とその端点間に対称拘束を追加することはできません！ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 光線として使用される直線の2端点と境界を表すエッジを選択してください。1つ目に選択された点がインデックスn1、2つ目の点がインデックスn2と対応し、データ値は比n2/n1を設定します。 - + Selected objects are not just geometry from one sketch. 選択されたオブジェクトは1つのスケッチから成るジオメトリーではありません。 - + Number of selected objects is not 3 (is %1). 選択したオブジェクトの数が 3 ではなく（%1 です）。 - + Cannot create constraint with external geometry only!! 外部ジオメトリーのみからなる拘束を作成することはできません！！ - + Incompatible geometry is selected! 互換性のないジオメトリが選択されています！ - + SnellsLaw on B-spline edge currently unsupported. B-スプラインエッジのスネル則拘束は現在サポートされていません。 - - + + Select at least one ellipse and one edge from the sketch. スケッチから少なくとも1つの楕円と1つのエッジを選択してください。 - + Sketch axes cannot be used in internal alignment constraint スケッチ軸を内部整列拘束で使用することはできません。 - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. 楕円を他の楕円に対して内部拘束することはできません。楕円を一つだけ選択してください。 - - + + Maximum 2 points are supported. 最大 2 点がサポートされています。 - - + + Maximum 2 lines are supported. 最大 2線がサポートされています。 - - + + Nothing to constrain 拘束はありません - + Currently all internal geometry of the ellipse is already exposed. 現在、楕円の全ての内部ジオメトリーは既に公開されています。 - - - - + + + + Extra elements 余分な要素 - - - + + + More elements than possible for the given ellipse were provided. These were ignored. 指定された楕円に対して可能な数を超えた要素が設定されました。これらは無視されました。 - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. 楕円弧を他の楕円弧に対して内部拘束することはできません。 - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. 楕円を他の楕円弧に対して内部拘束することはできません。楕円弧または楕円を一つだけ選択してください。 - + Currently all internal geometry of the arc of ellipse is already exposed. 現在、楕円の弧の全ての内部ジオメトリーは既に公開されています。 - + More elements than possible for the given arc of ellipse were provided. These were ignored. 指定された楕円の弧に対して可能な数を超えた要素が設定されました。これらは無視されました。 - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. 現在の内部ジオメトリにおいては、楕円または楕円弧のサポートのみサポートされてます。最後に選択した要素は、楕円または楕円弧である必要があります。 - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c スケッチからの拘束（複数可）を選択します。 - + CAD Kernel Error CADカーネルエラー @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. カーボンコピーは循環依存を作成することがあります。 - + This object is in another document. このオブジェクトは別のドキュメントです。 - + This object belongs to another body. Hold Ctrl to allow cross-references. このオブジェクトは他のボディーに依存しています。Ctrl を押すことで相互参照を許可します。 - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. このオブジェクトは別のボディーに属していて外部ジオメトリーを含んでいます。相互参照することはできません。 - + This object belongs to another part. このオブジェクトは別のパーツに属しています。 - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. 選択されているスケッチはこのスケッチと平行でありません。非平行スケッチを許可するにはCtrl+Altを押してください。 - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. 選択されたスケッチのXY軸はこのスケッチと同じ向きではありません。無視する場合はCtrl+Altを押してください。 - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. 選択されたスケッチの原点はこのスケッチと揃っていません。無視する場合はCtrl+Altを押してください。 @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 半径を挿入 - - + + Radius: 半径: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 直径を挿入 - - + + Diameter: 直径: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 長さ: - - + + Change radius 半径を変更 - - + + Change diameter 直径を変更 - + Refractive index ratio 屈折率 - + Ratio n2/n1: 比 n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. このリンクは依存関係の循環を発生させます。 - + This object is in another document. このオブジェクトは別のドキュメントです。 - + This object belongs to another body, can't link. このオブジェクトは別のボディーに属していてリンクできません。 - + This object belongs to another part, can't link. このオブジェクトは別のパーツに属していてリンクできません。 @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Unnamed @@ -3907,6 +3907,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. 外部ジオメトリーを扱うすべての制約が削除されました。 + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4253,70 +4273,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< スケッチャーを検証 - + Invalid constraints 無効な拘束 - - + + + Fix 修正 - - + + + Find 検査 - + Delete constraints to external geom. 外部ジオメトリーへの拘束を削除 - + Missing coincidences 一致点の欠損 - + Tolerance: 許容範囲: - + Highlight open vertexes 開いている頂点を強調表示 - + Ignore construction geometry 構築ジオメトリーを無視 + Degenerated geometry + Degenerated geometry + + + Reversed external geometry 反転された外部ジオメトリー - + Swap endpoints in constraints 拘束内の端点を交換 - + Constraint orientation locking 方向のロック拘束 - + Enable/Update 有効化/更新 - + Disable 無効化 @@ -4324,104 +4351,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch スケッチを編集 - + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - + Do you want to close this dialog? このダイアログを閉じますか？ - + Invalid sketch スケッチが無効です - + Do you want to open the sketch validation tool? スケッチ検証ツールを起動しますか? - + The sketch is invalid and cannot be edited. スケッチが不正で、編集できません。 - + Please remove the following constraint: 以下の拘束を削除してください: - + Please remove at least one of the following constraints: 以下の拘束から少なくとも1つを削除してください: - + Please remove the following redundant constraint: 以下の不要な拘束を削除してください: - + Please remove the following redundant constraints: 以下の不要な拘束を削除してください: - + Empty sketch スケッチが空です - + Over-constrained sketch スケッチが過剰拘束です - - - + + + (click to select) （クリックすると選択） - + Sketch contains conflicting constraints スケッチには、競合する拘束が含まれています - + Sketch contains redundant constraints スケッチには冗長な拘束が含まれています - + Fully constrained sketch スケッチが完全拘束になりました - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1</span></a> 自由度の拘束下のスケッチ - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1</span></a> 自由度の拘束下のスケッチ - + Solved in %1 sec %1 秒で求解しました - + Unsolved (%1 sec) 求解できません（%1 秒） @@ -4510,8 +4537,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 円または円弧の直径を固定 @@ -4519,8 +4546,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 円または円弧の半径を固定 @@ -4537,8 +4564,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc 終点と円弧に上の点から円弧を作成 @@ -4546,8 +4573,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points 円周上の3点から円を作成 @@ -4555,8 +4582,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points 中心と終点から円弧を作成 @@ -4564,8 +4591,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints 中心点、長半径、端点から楕円弧を作成 @@ -4573,8 +4600,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints 中心、長半径、端点から双曲線の円弧を作成 @@ -4582,8 +4609,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints 焦点、頂点、端点を指定して放物線の円弧を作成 @@ -4591,13 +4618,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points 制御点によるB-スプライン - - + + Create a B-spline by control points 制御点によるB-スプラインを作成 @@ -4605,8 +4632,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point 中心と円周上の点から円を作成 @@ -4614,8 +4641,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius 近点、遠点、短半径から楕円を作成 @@ -4623,8 +4650,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point 中心、長半径、1点から楕円を作成 @@ -4632,8 +4659,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner 中心点と1つの角を指定して七角形を作成 @@ -4641,8 +4668,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner 中心点と1つの角を指定して六角形を作成 @@ -4650,14 +4677,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner 中心点と1つの角を指定して八角形を作成 - - + + Create a regular polygon by its center and by one corner 中心点と1つの角を指定して正多角形を作成 @@ -4665,8 +4692,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner 中心点と1つの角を指定して正五角形を作成 @@ -4674,8 +4701,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner 中心点と1つの角を指定して正方形を作成 @@ -4683,8 +4710,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner 中心点と1つの角を指定して正三角形を作成 @@ -4692,13 +4719,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points 制御点による周期的なB-スプライン - - + + Create a periodic B-spline by control points 制御点による周期的なB-スプラインを作成 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.qm index 12c084c826..fe455610e3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.ts index c12216c2af..670f1135cf 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_kab.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Contrainte radiale - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Créer un arc de cercle dans l'esquisse - + Center and end points Centre et points d'extrémité - + End points and rim point Points d'extrémité et point sur périmètre @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Créer un cercle - + Create a circle in the sketcher Créer un cercle dans l'esquisse - + Center and rim point Point de centre et de bord - + 3 rim points Cercle par 3 points @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Créer une conique - + Create a conic in the sketch Créer une conique dans l’esquisse - + Ellipse by center, major radius, point Ellipse par centre, demi-grand axe, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse de périapse, apoapse, demi-petit axe - + Arc of ellipse by center, major radius, endpoints Arc d'ellipse par centre, demi-grand axe, extrémités - + Arc of hyperbola by center, major radius, endpoints Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Créer un polygone régulier - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Triangle - + Square Carré - + Pentagon Pentagone - + Hexagon Hexagone - + Heptagon Heptagone - + Octagon Octogone - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Contrainte angulaire - + Fix the angle of a line or the angle between two lines Fixer l'angle d'une ligne ou l'angle entre deux lignes @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Contrainte coïncidente - + Create a coincident constraint on the selected item Créer une contrainte coïncidente sur les éléments sélectionnés @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Contrainte dimensionnelle - + Fix a length of a line or the distance between a line and a vertex Fixer la longueur d'une ligne ou la distance entre une ligne et un point @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixer la distance horizontale entre deux points ou extrémités de ligne @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixer la distance verticale entre deux points ou extrémités de ligne @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Contrainte d'égalité - + Create an equality constraint between two lines or between circles and arcs Créer une contrainte d'égalité entre deux lignes ou entre des cercles et/ou des arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Contrainte horizontale - + Create a horizontal constraint on the selected item Créer une contrainte horizontale sur l'élément sélectionné @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Contraindre l'alignement interne - + Constrains an element to be aligned with the internal geometry of another element Contraint un élément pour qu'il soit aligné avec la géométrie interne d'un autre élément @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Contrainte fixe - + Create a lock constraint on the selected item Créer une contrainte fixe sur l'élément sélectionné @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Contrainte parallèle - + Create a parallel constraint between two lines Créer une contrainte parallèle entre deux lignes @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Contrainte perpendiculaire - + Create a perpendicular constraint between two lines Créer une contrainte de perpendicularité entre deux lignes @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Contrainte point sur objet - + Fix a point onto an object Fixer un point sur un objet @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Contrainte radiale - + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Contraint la réfraction (Loi de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Créer une contrainte de réfraction (Loi de Snell) entre deux extrémités des rayons et une arête en tant qu'interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Contrainte symétrique - + Create a symmetry constraint between two points with respect to a line or a third point Créer une contrainte de symétrie entre deux points par rapport à une ligne ou un point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Contrainte tangente - + Create a tangent constraint between two entities Créer une contrainte tangente entre deux entités @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Contrainte verticale - + Create a vertical constraint on the selected item Créer une contrainte verticale sur l'élément sélectionné @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Crée un arc par 3 points - + Create an arc by its end points and a point along the arc Créer un arc par ses extrémités et un point sur l'arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Créer un cercle par trois points - + Create a circle by 3 perimeter points Crée un cercle par 3 points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Crée un arc à partir du centre - + Create an arc by its center and by its end points Créer un arc par son centre et ses extrémités @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Crée un arc d'ellipse - + Create an arc of ellipse in the sketch Crée un arc d'ellipse dans l'esquisse @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Create an arc of hyperbola - + Create an arc of hyperbola in the sketch Create an arc of hyperbola in the sketch @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Create an arc of parabola - + Create an arc of parabola in the sketch Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Créer un cercle - + Create a circle in the sketch Créer un cercle dans l'esquisse @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Créer une ligne de construction - + Create a draft line in the sketch Créer une ligne de construction dans l'esquisse @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Crée une ellipse par 3 points - + Create an ellipse by 3 points in the sketch Crée une ellipse par 3 points d'esquisse @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Crée une ellipse par son centre - + Create an ellipse by center in the sketch Crée une ellipse par son centre dans l'esquisse @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Créer un congé - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Crée un heptagone - + Create a heptagon in the sketch Crée un heptagone dans l'esquisse @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Crée un hexagone - + Create a hexagon in the sketch Crée un hexagone dans l'esquisse @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Créer une ligne - + Create a line in the sketch Créer une ligne dans l'esquisse @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Crée un octogone - + Create an octagon in the sketch Crée un octogone dans l'esquisse @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Crée un pentagone - + Create a pentagon in the sketch Crée un pentagone dans l'esquisse @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Créer un point - + Create a point in the sketch Créer un point dans l'esquisse @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Créer une polyligne - + Create a polyline in the sketch. 'M' Key cycles behaviour Créer une polyligne. 'M' pour basculer entre les comportements @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Créer un rectangle - + Create a rectangle in the sketch Créer un rectangle dans l'esquisse @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Créer un polygone régulier - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Crée une rainure - + Create a slot in the sketch Crée un rainure dans l'esquisse @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Crée un carré - + Create a square in the sketch Crée un carré dans l'esquisse @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Insérer du texte - + Create text in the sketch Insérer un texte dans l'esquisse @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Crée un triangle équilatéral - + Create an equilateral triangle in the sketch Crée un triangle équilatéral dans l'esquisse @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Géométrie externe - + Create an edge linked to an external geometry Créer une arête liée à une géométrie externe. @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Bascule entre contrainte référence/pilote - + Toggles the toolbar or selected constraints to/from reference mode Active/désactive la barre d'outils ou la contrainte sélectionnée vers/depuis le mode référence @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Ajuster l'arête - + Trim an edge with respect to the picked position Ajuster une arête par rapport à la position sélectionnée. @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Sélectionnez une ou des arêtes de l'esquisse. - - - - + + + + Dimensional constraint Contrainte dimensionnelle @@ -2232,273 +2232,273 @@ Un des éléments sélectionnés doit être dans l'esquisse - - + + Select an edge from the sketch. Sélectionnez une arête de l'esquisse. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Contrainte impossible - - - - + + + + The selected edge is not a line segment L'arête sélectionnée n'est pas un segment de ligne - - - - - - + + + + + + Double constraint Double contrainte - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Le(s) élément(s) sélectionné(s) ne peu(ven)t pas accepter de contrainte horizontale! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Le(s) élément(s) sélectionné(s) ne peu(ven)t pas accepter de contrainte verticale! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Sélectionne un sommet autre que l'origine dans l'esquisse. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Error - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Sélectionnez deux sommets de l'esquisse ou plus. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Sélectionnez les sommets de l'esquisse. - - + + Select exactly one line or one point and one line or two points from the sketch. Sélectionnez soit une seule ligne, ou un point et une ligne, ou deux points de l'esquisse. - + Cannot add a length constraint on an axis! Impossible d'ajouter une contrainte de longueur sur un axe ! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Aucun des points sélectionnés ne passe par les courbes respectives, soit parce qu'elles font partie du même élément, soit parce qu'elles sont toutes deux géométriquement extérieures. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Sélectionne soit un point et plusieurs courbes, soit une courbe et plusieurs points. Vous avez sélectionné %1 courbes et %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Sélectionnez soit une seule ligne ou jusqu'à deux points de l'esquisse. - + Cannot add a horizontal length constraint on an axis! Impossible d'ajouter une contrainte de longueur horizontale sur un axe ! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Impossible d'ajouter une contrainte de longueur verticale sur un axe ! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Sélectionnez au moins deux lignes de l'esquisse. - - + + Select at least two lines from the sketch. Sélectionner au moins deux lignes de l'esquisse. - + Select a valid line Sélectionnez une ligne valide - - + + The selected edge is not a valid line L'arête sélectionnée n'est pas une ligne valide - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaisons acceptés : deux courbes; un point d'extrémité et une courbe; deux points d'extrémités; deux courbes et un point. - + Select some geometry from the sketch. perpendicular constraint Sélectionne une géométrie de l'esquisse. - + Wrong number of selected objects! perpendicular constraint Mauvais nombre d'objets sélectionnés! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Avec 3 objets, il doit y avoir 2 courbes et 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Impossible d'ajouter une contrainte de perpendicularité sur un point non connecté ! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. Une des arêtes sélectionnées doit être une ligne. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Sélectionne une géométrie de l'esquisse. - + Wrong number of selected objects! tangent constraint Mauvais nombre d'objets sélectionnés! - - - + + + Cannot add a tangency constraint at an unconnected point! Impossible d'ajouter une contrainte de tangence à un point non connecté ! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Sélectionne un ou plusieurs arcs ou cercles dans l'esquisse. - - + + Constrain equal Contrainte d'égalité - + Do you want to share the same radius for all selected elements? Voulez-vous que tous les éléments sélectionnés aient le même rayon? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Sélectionne une ou deux lignes dans l'esquisse. Ou sélectionne deux arêtes et un point. - - + + Parallel lines Lignes parallèles - - + + An angle constraint cannot be set for two parallel lines. Une contrainte angulaire ne peut pas être appliquée à deux parallèles. - + Cannot add an angle constraint on an axis! Impossible d'ajouter une contrainte angulaire sur un axe ! - + Select two edges from the sketch. Sélectionnez deux arêtes de l'esquisse. - - + + Select two or more compatible edges Sélectionnez au moins deux arêtes compatibles. - + Sketch axes cannot be used in equality constraints Les axes d'esquisse ne peuvent être utilisés dans une contrainte d'égalité. - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Sélectionnez au moins deux arêtes de même type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Sélectionnez deux points et une ligne de symétrie, deux points et un point de symétrie, ou une ligne et un point de symétrie dans l'esquisse. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Impossible d'ajouter une contrainte de symétrie entre une ligne et ses points d'extrémité ! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Sélectionnez deux extrémités de lignes pour agir comme des rayons, et une arête qui représente une limite. Le premier point sélectionné correspond à l'indice n1, le deuxième - à n2, et la valeur définit la rapport n2/n1. - + Selected objects are not just geometry from one sketch. Les objets sélectionnés ne sont pas seulement des géométries de l'esquisse. - + Number of selected objects is not 3 (is %1). Le nombre d'objets sélectionnés n'est pas égale à 3 (est %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! La géométrie sélectionnée est incompatible! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Sélectionne au moins une ellipse et une arête dans l'esquisse. - + Sketch axes cannot be used in internal alignment constraint Les axes de l'esquisse ne peuvent être utilisés pour une contrainte d'alignement interne - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. 2 points sont supportés au maximum. - - + + Maximum 2 lines are supported. 2 lignes sont supportées au maximum. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Actuellement, toute la géométrie interne de l'ellipse est déjà utilisée. - - - - + + + + Extra elements Éléments supplémentaires - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Vous avez fournis plus d'éléments que possible pour l'ellipse donnée. Ils ont été ignorées. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Actuellement, toute la géométrie interne de l'ellipse est déjà utilisée. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Trop d'éléments ont été fournis pour l'ellipse donnée. Ils ont été ignorées. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actuellement la géométrie interne est uniquement prise en charge pour les ellipses et les arcs d'ellipse. Le dernier élément sélectionné doit être une ellipse ou un arc d'ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sélectionner les contraintes de l'esquisse. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insére un rayon - - + + Radius: Rayon : @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Longueur : - - + + Change radius Change le rayon - - + + Change diameter Change diameter - + Refractive index ratio Ratio de l'indice de réfraction - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Sans nom @@ -3912,6 +3912,26 @@ Toutefois, aucune contrainte liée aux extrémités n'a été trouvée.All constraints that deal with external geometry were deleted. Toutes les contraintes liées à une géométrie externe ont été supprimées. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validation de l'esquisse - + Invalid constraints Contraintes non valides - - + + + Fix Réparer - - + + + Find Rechercher - + Delete constraints to external geom. Supprimer les contraintes liées à une géométrie externe - + Missing coincidences Coïncidences manquantes - + Tolerance: Tasurfa: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Géométrie externe inversée - + Swap endpoints in constraints Inverser les extrémités de contraintes - + Constraint orientation locking Verrouillage d'orientation - + Enable/Update Activer/Mettre à jour - + Disable Désactiver @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Esquisse non valide - + Do you want to open the sketch validation tool? Voulez-vous ouvrir l'outil de validation d'esquisse ? - + The sketch is invalid and cannot be edited. L'esquisse n'est pas valide et ne peut pas être éditée. - + Please remove the following constraint: Veuillez supprimer la contrainte suivante : - + Please remove at least one of the following constraints: Veuillez supprimer au moins une des contraintes suivantes : - + Please remove the following redundant constraint: Veuillez supprimer la contrainte redondante suivante : - + Please remove the following redundant constraints: Veuillez supprimer les contraintes redondantes suivantes : - + Empty sketch Esquisse vide - + Over-constrained sketch Esquisse surcontrainte - - - + + + (click to select) (cliquez pour sélectionner) - + Sketch contains conflicting constraints L'esquisse contient des contraintes contradictoires - + Sketch contains redundant constraints L'esquisse contient des contraintes redondantes - + Fully constrained sketch Esquisse entièrement contrainte - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Résolu en %1 secondes - + Unsolved (%1 sec) Non résolu (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Créer un arc par ses extrémités et un point sur l'arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Créer un cercle par 3 points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Créer un arc par son centre et ses extrémités @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Créer un arc d'ellipse par son centre, le rayon majeur, les extrémités @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Créer un cercle par son centre et par un point sur le périmètre @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Créer une ellipse avec le périapse, l'apoapse et le petit rayon @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Créer une ellipse avec le centre, le grand rayon et un point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Créer un heptagone avec son centre et un sommet @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Créer un hexagone avec son centre et un sommet @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Créer un octogone avec son centre et un sommet - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Créer un pentagone avec son centre et un angle @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Créer un carré avec son centre et un angle @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Créer un triangle équilatéral avec son centre et un sommet @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm index 408f42f44c..6ad465deb3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts index 4f74338cb6..f6c22e6039 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch 다른 스케치의 geometry 복사 @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius 제약조건: 반지름 - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher 호를 생성 - + Center and end points 중점과 끝점 - + End points and rim point 끝점과 호의 한 점 @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline B-spline 생성 - + Create a B-spline in the sketch B-spline 생성 @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle 생성: 원 - + Create a circle in the sketcher 원 생성 - + Center and rim point 중점과 원호의 한 점 - + 3 rim points 세 점(3 points) @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic 생성: 타원 - + Create a conic in the sketch 타원 생성 - + Ellipse by center, major radius, point 중점, 장축, 단축을 이용하여 타원 생성 - + Ellipse by Periapsis, apoapsis, minor radius 양 끝점과 단축을 이용하여 타원 생성 - + Arc of ellipse by center, major radius, endpoints 중점, 장축, 단축으로 구성된 타원의 호 생성 - + Arc of hyperbola by center, major radius, endpoints 중점, 장축, 단축으로 구성된 쌍곡선의 호 생성 - + Arc of parabola by focus, vertex, endpoints 중점, 장축, 단축으로 구성된 포물선의 호 생성 @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 생성: 다각형 - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle 삼각형 - + Square 사각형 - + Pentagon 오각형 - + Hexagon 육각형 - + Heptagon 칠각형 - + Octagon 팔각형 - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle 제약조건: 각도 - + Fix the angle of a line or the angle between two lines 단일 선의 각도(수평축 기준) 또는 두선 사이의 각도 고정 @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident 제약조건: 점 일치 - + Create a coincident constraint on the selected item 선택한 요소(최소 두개의 점)를 일치 @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance 제약조건: 거리 - + Fix a length of a line or the distance between a line and a vertex 선의 길이 또는 선과 점 사이의 수직거리 고정 @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends 두 점 또는 선의 수평거리 고정 @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends 두 점 또는 선의 수직거리 고정 @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal 제약조건: 동일 - + Create an equality constraint between two lines or between circles and arcs 두 선 또는 원과 원/호와 호/원과 호에 동일한 치수 부가 @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally 제약조건: 수평 - + Create a horizontal constraint on the selected item 선택한 요소를 수평하게 고정 @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock 제약조건: 고정 - + Create a lock constraint on the selected item 선택한 요소(점)를 원점을 기준으로 거리 고정 @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel 제약조건: 평행 - + Create a parallel constraint between two lines 선택한 요소(두 선)를 평행하게 고정 @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular 제약조건: 수직 - + Create a perpendicular constraint between two lines 선택한 요소(두 선)를 수직하게 고정 @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object 제약조건: 점을 선에 일치 - + Fix a point onto an object 점을 선에 일치 @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius 제약조건: 반지름 - + Fix the radius of a circle or an arc 원 또는 호의 반지름을 고정 @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') 제약조건: 굴절(스넬의 법칙) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical 제약조건: 대칭 - + Create a symmetry constraint between two points with respect to a line or a third point 마지막으로 선택한 선 또는 점을 기준으로 두 점이 대칭되도록 고정 @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent 제약조건: 탄젠트 - + Create a tangent constraint between two entities 두 엔티티가 서로 접하도록 고정 @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically 제약조건: 수직 - + Create a vertical constraint on the selected item 선택한 요소를 수직하게 고정 @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points 생성: 3점 호 - + Create an arc by its end points and a point along the arc 양 끝점과 호의 한 점을 이용하여 호를 생성합니다. @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points 생성: 3점 원 - + Create a circle by 3 perimeter points 세 점을 이용하여 원 생성 @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center 생성: 중점을 이용한 호 - + Create an arc by its center and by its end points 중점과 양 끝점을 이용하여 호 생성합니다. @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse 생성: 타원형태의 호 - + Create an arc of ellipse in the sketch 타원의 둘레를 따르는 호 생성 @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola 생성: 쌍공선형태의 호 - + Create an arc of hyperbola in the sketch 쌍공선형태의 호 생성 @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola 생성: 포물선형태의 호 - + Create an arc of parabola in the sketch 스케치에 포물선형태의 호 생성 @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline 생성: B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle 생성: 원 - + Create a circle in the sketch 중점과 반지름을 이용하여 원 생성 @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Create draft line - + Create a draft line in the sketch Create a draft line in the sketch @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points 생성: 3점을 이용한 타원 - + Create an ellipse by 3 points in the sketch 3점(장축의 끝점, 단축)을 이용하여 타원 생성 @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center 생성: 타원 - + Create an ellipse by center in the sketch 중점, 장축, 단축을 이용하여 타원 생성 @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet 수정: 필렛(Fillet) - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon 생성: 7각형 - + Create a heptagon in the sketch 7각형 생성 @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon 생성: 6각형 - + Create a hexagon in the sketch 6각형 생성 @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line 생성: 선 - + Create a line in the sketch 두 점을 이용하여 선 생성 @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon 생성: 8각형 - + Create an octagon in the sketch 8각형 생성 @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon 생성: 5각형 - + Create a pentagon in the sketch 5각형 생성 @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point 생성: 점 - + Create a point in the sketch 점 생성 @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline 생성: 자유곡선(Polyline) - + Create a polyline in the sketch. 'M' Key cycles behaviour 자유곡선(Polyline)을 생성. 'M'키를 눌러 형태 변경 @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle 생성: 사각형 - + Create a rectangle in the sketch 사각형의 끝점을 이용하여 사각형 생성 @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 생성: 다각형 - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot 생성: 직선 홈(Slot) - + Create a slot in the sketch 직선 홈(Slot) 생성 @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square 생성: 정사각형 - + Create a square in the sketch 중점과 끝점을 이용하여 정사각형 생성 @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text 생성: 문자 - + Create text in the sketch 스케치에 문자 생성 @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle 생성: 정삼각형 - + Create an equilateral triangle in the sketch 중점과 끝점을 이용하여 정삼각형 생성 @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry 외부 geometry - + Create an edge linked to an external geometry 외부 형상에서 geometry를 선택하여 현재 스케치에 생성 @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint 제약조건 타입 변경 - + Toggles the toolbar or selected constraints to/from reference mode 도구모음 또는 선택된 제약조건을 생성/레퍼런스 모드로 변경합니다. @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge 잘라내기(Trim) - + Trim an edge with respect to the picked position 선택한 위치의 선을 자릅니다. @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ 스케치에서 여러 선을 선택하세요. - - - - + + + + Dimensional constraint 치수 제약조건 @@ -2232,273 +2232,273 @@ 스케치에 있는 것만 선택할 수 있습니다. - - + + Select an edge from the sketch. 스케치에서 하나의 모서리를 선택하세요. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint 불가능한 제약조건입니다. - - - - + + + + The selected edge is not a line segment 선택된 선은 직선(line)이 아닙니다. - - - - - - + + + + + + Double constraint 이중 제약조건 - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! 선택된 요소(들)은 수평 제약조건을 적용할 수 없습니다. - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! 선택된 요소(들)은 수직 제약조건을 적용할 수 없습니다. - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. 두개 이상의 점을 선택하세요. - + Select one vertex from the sketch other than the origin. 스케치에서 원점이 아닌 다른 점을 선택하세요. - + Select only vertices from the sketch. The last selected vertex may be the origin. 오직 점만 선택이 가능합니다. 마지막에 선택은 원점이어야 합니다. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error 에러 - + Select two or more points from the sketch. 두개 이상의 점을 선택하세요. - - + + Select two or more vertexes from the sketch. 2개 이상의 점을 선택하세요. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. 스케치에서 여러 점을 선택하세요. - - + + Select exactly one line or one point and one line or two points from the sketch. 한 직선 또는 한 점, 한 직선 또는 두 점을 선택하세요. - + Cannot add a length constraint on an axis! 축에는 길이 제약조건을 적용할 수 없습니다! - + This constraint does not make sense for non-linear curves 이 제약조건은 비선형 곡선에는 사용할 수 없습니다. - - - - - - + + + + + + Select the right things from the sketch. 적절한 것을 선택하세요. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 선택된 점들은 동일한 element에 속해 있거나 외부 geometry이므로 해당 곡선에 제약조건이 적용되지 않았습니다. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. 하나의 점과 선들 또는 하나의 선과 점들을 선택하세요. %1개의 선과 %2개의 점을 선택하였습니다. - - - - + + + + Select exactly one line or up to two points from the sketch. 한 직선 또는 최대 2개의 점을 선택하세요. - + Cannot add a horizontal length constraint on an axis! 축에는 수평 길이 제약조건을 적용할 수 없습니다! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points 이 제약조건은 선 또는 한 쌍의 점에서만 사용할 수 있습니다. - + Cannot add a vertical length constraint on an axis! 축에는 수직 길이 제약조건을 적용할 수 없습니다! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. 두개 이상의 직선을 선택하세요. - - + + Select at least two lines from the sketch. 최소한 두개 이상의 직선을 선택하세요. - + Select a valid line 유효한 선을 선택하세요. - - + + The selected edge is not a valid line 선택된 선은 유효한 선이 아닙니다. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 사용가능한 조합: 두개의 곡선, 끝점과 곡선, 두개의 끝점, 두개의 곡선과 한 점. - + Select some geometry from the sketch. perpendicular constraint 스케치에서 geometry를 선택하세요. - + Wrong number of selected objects! perpendicular constraint 선택한 객체의 갯수가 잘못되었습니다! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3개의 객체(2개의 곡선과 1개의 점)가 있어야합니다. - - + + Cannot add a perpendicularity constraint at an unconnected point! 연결되지 않은 점에 대하여 수직 제약조건을 적용할 수 없습니다! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. 선택된 선중 하나는 직선이어야 합니다. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 사용가능한 조합: 두개의 곡선, 끝점과 곡선, 두개의 끝점, 두개의 곡선과 한 점. - + Select some geometry from the sketch. tangent constraint 스케치에서 geometry를 선택하세요. - + Wrong number of selected objects! tangent constraint 선택한 객체의 갯수가 잘못되었습니다! - - - + + + Cannot add a tangency constraint at an unconnected point! 연결되지 않은 점에 대하여 탄젠트 제약조건을 적용할 수 없습니다! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. 하나 이상의 호나 원을 선택하세요. - - + + Constrain equal 제약조건: 동일 - + Do you want to share the same radius for all selected elements? 선택된 모든 element가 동일한 반지름으로 설정하시겠습니까? - - + + Constraint only applies to arcs or circles. 호 또는 원에만 적용 가능한 제약조건입니다. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. 하나 이상의 직선을 선택하세요. 또는, 두개의 선과 하나의 점을 선택하세요. - - + + Parallel lines 평행 직선 - - + + An angle constraint cannot be set for two parallel lines. 각도 제약조건은 평행한 두 직선에는 적용할 수 없습니다. - + Cannot add an angle constraint on an axis! 축에는 각도 제약조건을 적용할 수 없습니다! - + Select two edges from the sketch. 두개의 선을 선택하세요. - - + + Select two or more compatible edges 2개 이상의 호환가능한 선을 선택하세요. - + Sketch axes cannot be used in equality constraints 스케치 축에는 동일 제약조건을 적용할 수 없습니다. - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type 동일한 타입의 모서리를 2개 이상 선택하세요. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 1)두 점과 대칭선 2)두 점과 대칭 점 또는 3)하나의 선과 대칭 점을 선택하세요. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! 선과 선에 포함된 점에는 대칭 제약조건을 적용할 수 없습니다! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. 선택된 객체는 스케치의 geometry가 아닙니다. - + Number of selected objects is not 3 (is %1). 3개의 객체가 필요합니다.(선택된 객체: %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! 호환되지 않는 geometry가 선택되었습니다! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. 최소한 하나의 타원과 선을 선택하세요. - + Sketch axes cannot be used in internal alignment constraint 스케치 축은 internal alignment 제약조건에 사용할 수 없습니다. - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. 최대 2개의 점을 선택할 수 있습니다. - - + + Maximum 2 lines are supported. 최대 2개의 직선을 선택할 수 있습니다. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. 현재 타원의 모든 내부 geometry가 보이고 있습니다. - - - - + + + + Extra elements 추가 요소들 - - - + + + More elements than possible for the given ellipse were provided. These were ignored. 선택된 타원에서 모든 요소가 이미 선택되었습니다. 따라서, 해당 요소들은 무시됩니다. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. 현재 타원의 호에 있는 모든 내부 geometry가 보이고 있습니다. - + More elements than possible for the given arc of ellipse were provided. These were ignored. 선택된 타원의 호에서 모든 요소가 선택되었습니다. 따라서, 해당 요소들은 무시됩니다. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. 현재 내부 geometry는 타원이나 타원의 호에서만 지원됩니다. 마지막으로 선택한 요소는 반드시 타원이나 타원의 호이어야 합니다. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 구속조건(들)을 선택하세요. - + CAD Kernel Error CAD 커널 에러 @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. 이 객체는 다른 문서에 있습니다. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 반지름 삽입 - - + + Radius: 반경: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: 직경: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 길이: - - + + Change radius 반지름 제약조건 - - + + Change diameter Change diameter - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. 이 연결은 연속적인 종속성을 초래합니다. - + This object is in another document. 이 객체는 다른 문서에 있습니다. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. 이 객체는 다른 part에 속해있으므로 연결할 수 없습니다. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed 무제 @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< 스케쳐 validation - + Invalid constraints Invalid constraints - - + + + Fix Fix - - + + + Find 찾기 - + Delete constraints to external geom. 외부 geometry에 적용되어 있는 제약조건을 제거하세요. - + Missing coincidences Missing coincidences - + Tolerance: Tolerance: - + Highlight open vertexes 열린 정점 강조 - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Enable/Update - + Disable Disable @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch 스케치 수정 - + A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. - + Do you want to close this dialog? 다이얼로그를 닫으시겠습니까? - + Invalid sketch 유효하지 않은 스케치 - + Do you want to open the sketch validation tool? 스케치 확인 도구를 여시겠습니까? - + The sketch is invalid and cannot be edited. 스키체가 유효하지 않으므로 수정할 수 없습니다. - + Please remove the following constraint: 다음 제약조건을 제거하세요. - + Please remove at least one of the following constraints: 다음 제약조건중 하나 이상을 제거하세요. - + Please remove the following redundant constraint: 중복 제약조건을 제거하세요: - + Please remove the following redundant constraints: 중복 제약조건을 제거하세요: - + Empty sketch 빈 스케치 - + Over-constrained sketch Over-constrained 스케치 - - - + + + (click to select) (클릭하여 선택하세요) - + Sketch contains conflicting constraints 스케치에 충돌하는 제약조건이 있습니다 - + Sketch contains redundant constraints 스케치에 중복되는 제약조건이 있습니다 - + Fully constrained sketch 완전히 구속된 스케치 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 원 또는 호의 반지름을 고정 @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc 양 끝점과 호의 한 점을 이용하여 호를 생성합니다. @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points 3 점을 이용하여 원을 생성합니다. @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points 중점과 양 끝점을 이용하여 호 생성합니다. @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints 중점, 장축(major), 단축(minor)의 두 점을 이용하여 타원형태의 호를 생성합니다. @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints 중점, 장축(major), 단축(minor)의 두 점을 이용하여 쌍곡선형태의 호를 생성합니다. @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints 중점, 장축(major), 단축(minor)의 두 점을 이용하여 포물선형태의 호를 생성합니다. @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point 중점과 원의 한 점을 이용하여 원을 생성합니다. @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius 장축(major)의 양 끝점과 단축을 이용하여 타원을 생성합니다. @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point 중점, 장축(major), 단축을 이용하여 타원을 생성합니다. @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner 중점과 모서리 한 점을 이용하여 7각형을 생성합니다. @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner 중점과 모서리 한 점을 이용하여 6각형을 생성합니다. @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner 중점과 모서리 한 점을 이용하여 8각형을 생성합니다. - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner 중점과 모서리 한 점을 이용하여 5각형을 생성합니다. @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner 중점과 모서리 한 점을 이용하여 정사각형을 생성합니다. @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner 중점과 모서리 한 점을 이용하여 정삼각형을 생성합니다. @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm index f393377520..0e32cd9d11 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts index f4a2be6dba..f38c18a957 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Kalkė - + Copies the geometry of another sketch Nukopijuoja kito brėžinio geometriją @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Spindulio apribojimas - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Nubrėžti lanką brėžinyje - + Center and end points Iš viduriniojo ir galinių taškų - + End points and rim point Iš galinių ir liestinės taškų @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Nubrėžti B-splainą - + Create a B-spline in the sketch Nubrėžti B-splainą brėžinyje @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Nubrėžti apskritimą - + Create a circle in the sketcher Nubrėžti apskritimą brėžinyje - + Center and rim point Iš vidurio ir liestinės taškų - + 3 rim points 3 liestinės taškai @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Nubrėžti kūgio pjūvio kreivę - + Create a conic in the sketch Nubrėžti kūgio pjūvio kreivę brėžinyje - + Ellipse by center, major radius, point Elipsė, nurodant vidurio, ir didžiojo spindulio taškus - + Ellipse by Periapsis, apoapsis, minor radius Elipsė, nurodant apsides ir didįjį spindulį - + Arc of ellipse by center, major radius, endpoints Elipsė, nurodant vidurio, ir didžiojo spindulio ir galinius taškus - + Arc of hyperbola by center, major radius, endpoints Hiperbolės lankas, nurodant vidurio, ir didžiojo spindulio ir galinius taškus - + Arc of parabola by focus, vertex, endpoints Parabolės lankas, nurodant židinio, viršūnės ir galinius taškus @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Nubrėžti taisyklingąjį daugiakampį - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Trikampis - + Square Kvadratas - + Pentagon Penkiakampis - + Hexagon Šešiakampis - + Heptagon Septyniakampis - + Octagon Aštuonkampis - + Regular Polygon Taisyklingasis daugiakampis @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Apriboti kampą - + Fix the angle of a line or the angle between two lines Įtvirtinti tiesės kampą, arba kampą tarp dviejų tiesių @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Visiška suvaržyti pasirinktą narį @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Sutapimo apribojimas - + Create a coincident constraint on the selected item Sutapdinti ir surišti taškus @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Apriboti atstumą - + Fix a length of a line or the distance between a line and a vertex Įtvirtinti tiesės atkarpos ilgį, arba atstumą tarp taškų, arba atstumą tarp tiesės ir taško @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Įtvirtinti gulsčiąjį atstumą tarp dviejų taškų arba tarp atkarpos galų @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Įtvirtinti statmenąjį atstumą tarp dviejų taškų arba tarp atkarpos galų @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Tapatumo apribojimas - + Create an equality constraint between two lines or between circles and arcs Sukurti tapatumo sąryšį dviem atkarpoms, apskritimams, arba lankams @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Apriboti gulščiai - + Create a horizontal constraint on the selected item Padaryti narį visuomet gulsčiu @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Pritvirtinti prie vidinės geometrijos - + Constrains an element to be aligned with the internal geometry of another element Pritvirtina elementą prie kito elemento vidinės geometrijos @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Padėties apribojimas - + Create a lock constraint on the selected item Nurodyti pasirinkto taško nekintančias koordinates @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Apriboti lygiagretumą - + Create a parallel constraint between two lines Padaryti dvi tiesės atkarpas tarpusavyje lygiagrečiomis @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Apriboti statmenai - + Create a perpendicular constraint between two lines Padaryti dvi tiesės atkarpas tarpusavyje statmenomis @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Įtvirtinti tašką objekte - + Fix a point onto an object Įtvirtinti tašką objekte @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Spindulio apribojimas - + Fix the radius of a circle or an arc Nustatyti pastovų apskritimo ar lanko spindulį @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Lūžio apribojimas (Pagal šviesos lūžio dėsnį) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Sukurti apribojimą lūžio dėsniui (du galiniai spindulio taškai ir skiriančioji kraštinė). @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Apriboti simetriškai - + Create a symmetry constraint between two points with respect to a line or a third point Sukurti simetriškumo sąryšį tarp dviejų taškų ir tiesės arba trečiojo taško @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Liestinės apribojimas - + Create a tangent constraint between two entities Padaryti du objektus tarpusavyje lygiagrečius @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Apriboti statmenai - + Create a vertical constraint on the selected item Padaryti pasirinktą narį visuomet statmenu @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Nubrėžti lanką iš trijų taškų - + Create an arc by its end points and a point along the arc Nubrėžti lanką, nurodant jo galinius taškus ir tašką, esanti lanke @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Nubrėžti apskritimą iš trijų taškų - + Create a circle by 3 perimeter points Nubrėžti apskritimą iš trijų perimetro taškų @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Nubrėžti lanką, nurodant jo vidurį - + Create an arc by its center and by its end points Nubrėžti lanką nurodant jo vidurio ir galinius taškus @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Nubrėžti elipsės lanką - + Create an arc of ellipse in the sketch Nubrėžti elipsės lanką brėžinyje @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Nubrėžti hiperbolės lanką - + Create an arc of hyperbola in the sketch Nubrėžti hiperbolės lanką brėžinyje @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Nubrėžti parabolės lanką - + Create an arc of parabola in the sketch Nubrėžti parabolės lanką brėžinyje @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Nubrėžti B-splainą - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Nubrėžti apskritimą - + Create a circle in the sketch Nubrėžti apskritimą brėžinyje @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Nubrėžti liniją - + Create a draft line in the sketch Nubrėžti liniją brėžinyje @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Nubrėžti elipsę per 3 taškus - + Create an ellipse by 3 points in the sketch Nubrėžti elipsę per 3 nurodytus taškus brėžinyje @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Nubrėžti elipsę, nurodant jos vidurį - + Create an ellipse by center in the sketch Brėžinyje nubrėžti elipsę nurodant jos vidurį @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Užapvalinti kampą - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Nubrėžti septynkampį - + Create a heptagon in the sketch Brėžinyje nubrėžti septynkampį @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Nubrėžti šešiakampį - + Create a hexagon in the sketch Nubrėžti šešiakampį brėžinyje @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Nubrėžti tiesę - + Create a line in the sketch Nubrėžti tiesę brėžinyje @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Nubrėžti aštuonkampį - + Create an octagon in the sketch Brėžinyje nubrėžti aštuonkampį @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Nubrėžti penkiakampį - + Create a pentagon in the sketch Brėžinyje nubrėžti penkiakampį @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Nubrėžti periodinį B-splainą - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Nubrėžti tašką - + Create a point in the sketch Nubrėžti tašką brėžinyje @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Nubrėžti laužtinę - + Create a polyline in the sketch. 'M' Key cycles behaviour Nubrėžti laužtinę brėžinyje. Mygtuku „M“ pakeičiamas braižymo būdas @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Nubrėžti stačiakampį - + Create a rectangle in the sketch Brėžinyje nubrėžti stačiakampį @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Nubrėžti taisyklingąjį daugiakampį - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Nubrėžti angą - + Create a slot in the sketch Nubrėžti angą brėžinyje @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Nubrėžti kvadratą - + Create a square in the sketch Nubrėžti kvadratą brėžinyje @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Nubrėžti tekstą - + Create text in the sketch Nubrėžti tekstą brėžinyje @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Nubrėžti lygiakraštį trikampį - + Create an equilateral triangle in the sketch Nubrėžti lygiakraštį trikampį brėžinyje @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Ištęsti kraštinę - + Extend an edge with respect to the picked position Ištęsti kraštinę iki pasirinktos vietos @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Išorinė geometrija - + Create an edge linked to an external geometry Sukurti kraštinę, susietą su išorine geometrija @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Pakeisti apribojimą į atskaitinį ar postūmio - + Toggles the toolbar or selected constraints to/from reference mode Persijungti tarp brėžinio apibrėžimo suvaržymais ir orientyrais @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Apkirpti kraštinę - + Trim an edge with respect to the picked position Pašalinti kraštinės dalį iki pasirinktos vietos @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Jūs prašote nekeisti mazgo sudėtingumo laipsnio. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Mazgo indeksas išėjo iš ribų. Atkreipkite dėmesį, kad pagal OCC žymėjimą, pirmojo mazgo indeksas yra lygus 1, o ne 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Mazgo sudėtingumas negali būti mažesnis, nei nulis. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC negali sumažinti sudėtingumo didžiausio leistino nuokrypio ribose. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Pasirinkite kraštinę(-es), esančią(-as) brėžinyje. - - - - + + + + Dimensional constraint Matmens sąryšis (apribojimas) @@ -2232,273 +2232,273 @@ Vienas iš pažymėtųjų turi būti brėžinyje - - + + Select an edge from the sketch. Pasirinkite kraštinę, esančią brėžinyje. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Neįmanomas apribojimas (ryšys) - - - - + + + + The selected edge is not a line segment Pasirinkta kraštinė nėra tiesės atkarpa - - - - - - + + + + + + Double constraint Perteklinis apribojimas (ryšys) - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Pasirinktų narių negalima padaryti gulsčiais! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Pasirinktų narių negalima padaryti statmenais! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Pasirinkite viršūnes, esančias brėžinyje. - + Select one vertex from the sketch other than the origin. Pasirinkite viršūnę, esančią brėžinyje (išskyrus koordinačių pradžios tašką). - + Select only vertices from the sketch. The last selected vertex may be the origin. Pasirinkite tik viršūnes, esančias brėžinyje. Paskutinė pasirinkta viršūnė gali sutapti su koordinačių pradžia. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Klaida - + Select two or more points from the sketch. Pasirinkite bent du taškus, esančius brėžinyje. - - + + Select two or more vertexes from the sketch. Pasirinkite bent dvi viršūnes, esančias brėžinyje. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Pasirinkite viršūnes, esančias brėžinyje. - - + + Select exactly one line or one point and one line or two points from the sketch. Pasirinkite arba tiesinę atkarpą, arba tašką ir tiesinę atkarpą, arba du taškus, esančius brėžinyje. - + Cannot add a length constraint on an axis! Negalima nurodyti ilgio ašiai! - + This constraint does not make sense for non-linear curves Šiuo apribojimu nesurišamos kreivės - - - - - - + + + + + + Select the right things from the sketch. Pasirinkti atitinkamos rūšies objektus, esančius brėžinyje. - - + + Point on B-spline edge currently unsupported. Šiuo metu taškas B-splaininėje kraštinėje yra nepalaikomas. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nė vienas iš pasirinktų taškų nebuvo surišti su atitinkamomis kreivėmis, nes arba jie priklauso toms kreivėms, arba abu yra išorinės geometrijos taškai. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Pasirinkite vieną tašką ir keletą kreivių, arba vieną kreivę ir kelis taškus. Pasirinkta %1 kreivės(-ių) ir %2 taškai(-ų). - - - - + + + + Select exactly one line or up to two points from the sketch. Pasirinkite arba tiesinę atkarpą, arba du taškus, esančius brėžinyje. - + Cannot add a horizontal length constraint on an axis! Negalima nurodyti gulščiojo ilgio ašiai! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Šis ryšys (apribojimas) galimas tik tiesės atkarpai arba taškų porai - + Cannot add a vertical length constraint on an axis! Negalima nurodyti statmenojo ilgio ašiai! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Pasirinkite bent dvi tiesines atkarpas, esančias brėžinyje. - - + + Select at least two lines from the sketch. Pasirinkite bent dvi tiesines atkarpas, esančias brėžinyje. - + Select a valid line Pasirinkti elementai turi būti tik tiesinės atkarpos - - + + The selected edge is not a valid line Pasirinkta kraštinė nėra tiesinė atkarpa - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Galimi šie deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taškai; dvi kreivės ir taškas. - + Select some geometry from the sketch. perpendicular constraint Pažymėkite geometrinius elementus, esančius brėžinyje. - + Wrong number of selected objects! perpendicular constraint Netinkamas pasirinktų elementų kiekis! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Kai yra pasirinkti 3 objektai, turi būti 2 kreivės ir 1 taškas. - - + + Cannot add a perpendicularity constraint at an unconnected point! Neįmanoma taško apriboti statmenuoju sąryšiu, nes taškas nėra kreivės galinis taškas! - - - + + + Perpendicular to B-spline edge currently unsupported. Statmenumo B-splaino kraštinės atžvilgiu padarymas nepalaikomas. - - + + One of the selected edges should be a line. Viena iš pasirinktų kraštinių turi būti tiesinė atkarpa. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2555,250 +2555,250 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taškai; dvi kreivės ir taškas. - + Select some geometry from the sketch. tangent constraint Pažymėkite geometrinius elementus, esančius brėžinyje. - + Wrong number of selected objects! tangent constraint Netinkamas pasirinktų elementų kiekis! - - - + + + Cannot add a tangency constraint at an unconnected point! Neįmanoma taško apriboti liestinės sąryšiu, nes taškas nėra kreivės galinis taškas! - - - + + + Tangency to B-spline edge currently unsupported. Lygiagretumo B-splaino kraštinės atžvilgiu padarymas nepalaikomas. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Pasirinkite bent vieną lanką ar apskritimą, esantį brėžinyje. - - + + Constrain equal Tapatumo apribojimas - + Do you want to share the same radius for all selected elements? Ar norite, kad visų pasirinktų elementų spindulys būtų vienodas? - - + + Constraint only applies to arcs or circles. Apribojimas taikomas tik lankams arba apskritimams. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Pasirinkite brėžinyje esančias dvi tieses, arba dvi kraštines ir tašką. - - + + Parallel lines Lygiagrečios tiesės - - + + An angle constraint cannot be set for two parallel lines. Negalima surišti per kampą dviejų lygiagrečių tiesių. - + Cannot add an angle constraint on an axis! Negalima nurodyti pokrypio kampo ašiai! - + Select two edges from the sketch. Pasirinkite dvi kraštines, esančias brėžinyje. - - + + Select two or more compatible edges Pasirinkite bent dvi tos pačios rūšies kraštines. Galima pasirinkti arba tieses, arba apskritimus ir jų lankus, arba elipses ir jų lankus. - + Sketch axes cannot be used in equality constraints Brėžinio ašys negali būti surištos tapatumo sąryšiu (apribojimu) - + Equality for B-spline edge currently unsupported. B-splaino kraštinių tapatumo surišimas nepalaikomas. - - + + Select two or more edges of similar type Pasirinkite bent dvi tos pačios rūšies kraštines - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Pasirinkite du taškus ir atkarpą, kaip simetrijos ašį, arba du taškus ir simetrijos tašką, arba tiesinę atkarpą ir simetrijos tašką, esančius brėžinyje. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Neįmanoma taškų surišti simetriškai, nes jie priklauso atkarpai – simetrijos ašiai! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Pasirinkti du tiesinės atkarpos, laikomos spinduliu, galinius taškus ir kraštinę, laikomą lūžio riba. Pirmasis pasirinktas taškas atitinka terpę su lūžio rodikliu n1, sekantis – su n2, lūžio kampas priklausys nuo dalmens n2/n1. - + Selected objects are not just geometry from one sketch. Pasirinkti objektai nėra vien tik brėžiniui priklausanti geometrija. - + Number of selected objects is not 3 (is %1). Pasirinktų objektų skaičių nėra lygus 3 (pasirinkta %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Pasirinkta nesuderinama geometrija! - + SnellsLaw on B-spline edge currently unsupported. Lūžio dėsnis B-splaino kraštinei yra nepalaikomas. - - + + Select at least one ellipse and one edge from the sketch. Pasirinkite bent vieną elipsę ir vieną kraštinę, esančias brėžinyje. - + Sketch axes cannot be used in internal alignment constraint Brėžinio ašys negali būti panaudotos apriboti vidinį lygiavimą - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Leidžiami daugiausia 2 taškai. - - + + Maximum 2 lines are supported. Leidžiamos daugiausia 2 tiesės. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Visa vidinė šios elipsės geometrija jau užimta. - - - - + + + + Extra elements Papildomi elementai - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Elipsei elementų nurodyta daugiau, nei galima. Perteklinių elementų nepaisoma. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Visa vidinė šio elipsės lanko geometrija jau užimta. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Elipsės lankui elementų nurodyta daugiau, nei galima. Perteklinių elementų nepaisoma. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Vidinė geometrija yra naudojama tik elipsėms ir elipsių lankams. Elipsė ar elipsės lankas turi būti pasirinkti žymėjimo pabaigoje. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Pasirinkti sąryšį(-ius), priklausančius brėžiniui. - + CAD Kernel Error CAD branduolio klaida @@ -2941,42 +2941,42 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Nematomoji kopija gali sukelti žiedinį pavaldumą. - + This object is in another document. Šis objektas yra kitame dokumente. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Šis objektas priklauso kitai detalei. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Pasirinkto brėžinio XY plokšumos pokrypis nesutampa su šio brėžinio plokštumos pokrypiu. Kad to nepaisyti, paspauskite „Ctrl+Alt“. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Pasirinkto brėžinio atskaitos pradžios taškas nesutampa su šio brėžinio atskaitos tašku. Kad to nepaisyti, paspauskite „Ctrl+Alt“. @@ -3062,8 +3062,8 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Įveskite spindulio vertę - - + + Radius: Radius: @@ -3074,8 +3074,8 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Length: - - + + Change radius Keisti spindulio vertę - - + + Change diameter Change diameter - + Refractive index ratio Lūžio rodiklių santykis - + Ratio n2/n1: Santykis n2/n1: @@ -3136,22 +3136,22 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Susiejus tai, susidarys žiedinis pavaldumas. - + This object is in another document. Šis objektas yra kitame dokumente. - + This object belongs to another body, can't link. Šis daiktas yra kito daikto narys, todėl jo negalima susieti. - + This object belongs to another part, can't link. Šis objektas priklauso kitai detalei, todėl jo negalima susieti. @@ -3192,8 +3192,8 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška SketcherGui::PropertyConstraintListItem - - + + Unnamed Be pavadinimo @@ -3912,6 +3912,26 @@ Visgi, nei vienas sąryšis ar apribojimas nėra susietas su galiniais šių lan All constraints that deal with external geometry were deleted. Buvo panaikinti visi sąryšiai ir apribojimai, susieti su išorine geometrija. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Brėžinio tikrinimas - + Invalid constraints Neleistini sąryšiai - - + + + Fix Nustatyti - - + + + Find Rasti - + Delete constraints to external geom. Naikinti sąryšius, susietus su išorine geometrija. - + Missing coincidences Praleisti sutapimai - + Tolerance: Leidžiamoji nuokrypa: - + Highlight open vertexes Paryškinti atviras viršūnes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Apgręžtoji išorinė geometrija - + Swap endpoints in constraints Sąryšiuose sukeisti galinius taškus vietomis - + Constraint orientation locking Erdvinės padėties suvaržymas - + Enable/Update Įgalinti/atnaujinti - + Disable Išjungti @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sugadintas brėžinys - + Do you want to open the sketch validation tool? Ar norite atverti brėžinio tikrinimo priemonę? - + The sketch is invalid and cannot be edited. Brėžinys yra sugadintas ir negali būti taisomas. - + Please remove the following constraint: Prašom, pašalinkite šiuos sąryšius: - + Please remove at least one of the following constraints: Prašome pašalinti bent vieną šių sąryšių: - + Please remove the following redundant constraint: Prašome pašalinti šiuos perteklinius sąryšius: - + Please remove the following redundant constraints: Prašome pašalinti šiuos perteklinius sąryšius: - + Empty sketch Tuščias brėžinys - + Over-constrained sketch Brėžinys pernelyg suvaržytas pertekliniais suvaržymais - - - + + + (click to select) (spauskite ir pažymėkite) - + Sketch contains conflicting constraints Brėžinyje yra nesuderinamų sąryšių - + Sketch contains redundant constraints Brėžinyje yra perteklinių sąryšių - + Fully constrained sketch Visiškai suvaržytas (vienareikšmiškai apibrėžtas) brėžinys - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Išspręsta per %1 s - + Unsolved (%1 sec) Neišspręsta (%1 s) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Nustatyti pastovų apskritimo ar lanko spindulį @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Nubrėžti lanką, nurodant jo galinius taškus ir tašką, esanti lanke @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Nubrėžti apskritimą, einantį per tris taškus @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Nubrėžti lanką nurodant jo vidurio ir galinius taškus @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Nubrėžti elipsės lanką, nurodant jos vidurio tašką, didįjį spindulį ir galinius taškus @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Nubrėžti hiperbolės lanką, nurodant jos vidurio tašką, didįjį spindulį ir galinius taškus @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Nubrėžti parabolės lanką, nurodant židinio, viršūnės ir galinius taškus @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-splainas, nurodant valdančiuosius taškus - - + + Create a B-spline by control points Nubrėžti B-splainą, nurodant valdančiuosius taškus @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Nubrėžti apskritimą nurodant jo vidurio ir spindulio taškus @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Nubrėžti elipsę, nurodant apsides ir didįjį spindulį @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Nubrėžti elipsę, nurodant jos vidurio tašką, didįjį spindulį ir tašką @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Nubrėžti septynkampį, nurodant vidurio tašką ir vieną iš kampų @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Nubrėžti šešiakampį, nurodant vidurio tašką ir vieną iš kampų @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Nubrėžti aštuonkampį, nurodant vidurio tašką ir vieną iš kampų - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Nubrėžti penkiakampį, nurodant vidurio tašką ir vieną iš kampų @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Nubrėžti kvadratą, nurodant vidurio tašką ir vieną iš kampų @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Nubrėžti lygiakraštį trikampį, nurodant vidurio tašką ir vieną iš kampų @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodinis B-splainas, nurodant valdančiuosius taškus - - + + Create a periodic B-spline by control points Nubrėžti periodinį B-splainą, nurodant valdančiuosius taškus diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm index be786ad11c..c5a71cf41f 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index 1a631dcb14..04cad818f7 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Schetsen - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Kopieert de geometrie van een andere tekening @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Schetsen - + Constrain arc or circle Beperk de boog of de cirkel - + Constrain an arc or a circle Beperk een boog of een cirkel - + Constrain radius Straal vastzetten - + Constrain diameter Beperk de diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Schetsen - + Create arc Boog maken - + Create an arc in the sketcher Creëer een boog in de schets - + Center and end points Middelpunt en eindpunten - + End points and rim point Eindpunten en randpunt @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Schetsen - + Create a B-spline Maak een B-spline - + Create a B-spline in the sketch Maak een B-spline in de schets @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Schetsen - + Create circle Cirkel maken - + Create a circle in the sketcher Maak een cirkel in de schetser - + Center and rim point Middelpunt en randpunt - + 3 rim points 3 randpunten @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Schetsen - + Create a conic Creëer een kegel - + Create a conic in the sketch Creëer een kegel in de schets - + Ellipse by center, major radius, point Ellips bij het midden, hoofdstraal, punt - + Ellipse by Periapsis, apoapsis, minor radius Ellips door de periapsis, apoapsis en substraal - + Arc of ellipse by center, major radius, endpoints Elliptische boog door het midden, hoofdstraal, eindpunten - + Arc of hyperbola by center, major radius, endpoints Hyperbolische boog via het midden, hoofdstraal en eindpunten - + Arc of parabola by focus, vertex, endpoints Paraboolboog door zijn focus, vertex, eindpunten @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Schetsen - + Create regular polygon Regelmatige veelhoek maken - + Create a regular polygon in the sketcher Maak een regelmatige veelhoek in de schetser - + Triangle Driehoek - + Square Vierkant - + Pentagon Vijfhoek - + Hexagon Zeshoek - + Heptagon Zevenkant - + Octagon Achthoek - + Regular Polygon Regelmatige veelhoek @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Schetsen - + Constrain angle Beperk hoek - + Fix the angle of a line or the angle between two lines Zet de hoek van een lijn of de hoek tussen twee lijnen vast @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Schetsen - + Constrain Block Beperk blok - + Create a Block constraint on the selected item Maak een blokbeperking op het geselecteerde item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Schetsen - + Constrain coincident Samenvallende beperking - + Create a coincident constraint on the selected item Maak een samenvallende beperking op het geselecteerde item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Schetsen - + Constrain diameter Beperk de diameter - + Fix the diameter of a circle or an arc Zet de diameter van een cirkel of een boog vast @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Schetsen - + Constrain distance Afstand beperking - + Fix a length of a line or the distance between a line and a vertex Vergrendel de lengte van een lijn of de afstand tussen een lijn en een punt @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Schetsen - + Constrain horizontal distance Beperk horizontale afstand - + Fix the horizontal distance between two points or line ends De horizontale afstand tussen twee punten of lijneinden vastzetten @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Schetsen - + Constrain vertical distance Beperk verticale afstand - + Fix the vertical distance between two points or line ends De verticale afstand tussen twee punten of lijneinden vastzetten @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Schetsen - + Constrain equal Gelijke beperken - + Create an equality constraint between two lines or between circles and arcs Maak een Gelijkheidsbeperking tussen twee lijnen of tussen cirkels en bogen @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Schetsen - + Constrain horizontally Horizontale beperking - + Create a horizontal constraint on the selected item Maak een horizontale beperking op het geselecteerde item @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Schetsen - + Constrain InternalAlignment Beperk de interne uitlijning - + Constrains an element to be aligned with the internal geometry of another element Beperkt een element dat uitgelijnd moet worden met de interne geometrie van een ander element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Schetsen - + Constrain lock Vastzet beperking - + Create a lock constraint on the selected item Vergrendel het geselecteerde item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Schetsen - + Constrain parallel Parallelle-beperking - + Create a parallel constraint between two lines Maak een parallelle beperking tussen twee lijnen @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Schetsen - + Constrain perpendicular Beperk loodrecht - + Create a perpendicular constraint between two lines Maak een loodrechte beperking tussen twee lijnen @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Schetsen - + Constrain point onto object Zet punt vast op object - + Fix a point onto an object Een punt op een object vastleggen @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Schetsen - + Constrain radius Straal vastzetten - + Fix the radius of a circle or an arc De straal van een cirkel of boog vastzetten @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Schetsen - + Constrain refraction (Snell's law') Beperk de refractie (wet van Snellius) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Maak een beperking van de brekingswet (wet van Snellius) tussen twee eindpunten van stralen en een rand als interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Schetsen - + Constrain symmetrical Symmetrische-beperken - + Create a symmetry constraint between two points with respect to a line or a third point Maak een symmetriebeperking tussen twee punten ten opzichte van een lijn of een derde punt @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Schetsen - + Constrain tangent Tangent beperken - + Create a tangent constraint between two entities Tangentiële beperkingen tussen twee entiteiten maken @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Schetsen - + Constrain vertically Verticale beperking - + Create a vertical constraint on the selected item Maak een verticale beperking op het geselecteerde item @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Schetsen - + Create arc by three points Een boog van 3 punten maken - + Create an arc by its end points and a point along the arc Maak een boog door zijn eindpunten en een punt langs de boog @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Schetsen - + Create circle by three points Een cirkel van 3 punten maken - + Create a circle by 3 perimeter points Een cirkel aanmaken op basis van 3 omtrekpunten @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Schetsen - + Create arc by center Creëer boog vanaf center - + Create an arc by its center and by its end points Maak een boog door zijn eindpunten en een punt langs de boog @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Schetsen - + Create an arc of ellipse Boog of ovaal maken - + Create an arc of ellipse in the sketch Maak Boog of ovaal in de schets @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Schetsen - + Create an arc of hyperbola Maak een hyperbolische boog aan - + Create an arc of hyperbola in the sketch Maak een hyperbolische boog aan in de schets @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Schetsen - + Create an arc of parabola Maak een parabolische boog aan - + Create an arc of parabola in the sketch Maak een parabolische boog aan in de schets @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Schetsen - + Create B-spline Maak B-spline aan - + Create a B-spline via control points in the sketch. Maakt een B-spline via controlepunten in de schets. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Schetsen - + Create circle Cirkel maken - + Create a circle in the sketch Maak een cirkel in de schets @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Schetsen - + Create draft line Ontwerplijn maken - + Create a draft line in the sketch Maak een ontwerplijn in de schets @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Schetsen - + Create ellipse by 3 points Ovaal van 3 punten maken - + Create an ellipse by 3 points in the sketch Maak een ovaal van 3 punten in de schets @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Schetsen - + Create ellipse by center Maak ellips aan via het midden - + Create an ellipse by center in the sketch Maak een ellips aan via het midden in de schets @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Schetsen - + Create fillet Maak afronding - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Schetsen - + Create heptagon Zevenkant maken - + Create a heptagon in the sketch Maak een zevenkant in de schets @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Schetsen - + Create hexagon Zeskant maken - + Create a hexagon in the sketch Maak een zeskant in de schets @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Schetsen - + Create line Lijn maken - + Create a line in the sketch Maak een lijn in de schets @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Schetsen - + Create octagon Achtkant maken - + Create an octagon in the sketch Maak een achtkant in de schets @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Schetsen - + Create pentagon Vijfkant maken - + Create a pentagon in the sketch Maak vijfkant in de schets @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Schetsen - + Create periodic B-spline Maken van periodieke B-spline - + Create a periodic B-spline via control points in the sketch. Maak een periodieke B-spline via controlepunt in de schets. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Schetsen - + Create point Punt maken - + Create a point in the sketch Maak een punt in de schets @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Schetsen - + Create polyline Polylijn aanmaken - + Create a polyline in the sketch. 'M' Key cycles behaviour Maak een polylijn aan in de schets. De 'M-toets' wisselt tussen de verschillende gedragen @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Schetsen - + Create rectangle Rechthoek maken - + Create a rectangle in the sketch Maak een rechthoek in de schets @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Schetsen - + Create regular polygon Regelmatige veelhoek maken - + Create a regular polygon in the sketch Maak een regelmatige veelhoek aan in de schets @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Schetsen - + Create slot Sleuf maken - + Create a slot in the sketch Maak sleuf in de schets @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Schetsen - + Create square Vierkant maken - + Create a square in the sketch Maak een vierkant aan in de schets @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Schetsen - + Create text Tekst aanmaken - + Create text in the sketch Tekst in de tekening aanmaken @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Schetsen - + Create equilateral triangle Maak gelijkzijdige driehoek aan - + Create an equilateral triangle in the sketch Maak een gelijkzijdige driehoek aan in de schets @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Schetsen - + Extend edge Breid de rand uit - + Extend an edge with respect to the picked position Breid een rand uit ten opzichte van de geselecteerde positie @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Schetsen - + External geometry Externe geometrie - + Create an edge linked to an external geometry Maak een rand gekoppeld aan een externe geometrie @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Schetsen - + Toggle activate/deactivate constraint Beperking activeren/deactiveren - + Toggles activate/deactivate state for selected constraints Schakelt de status activeren/deactiveren voor de geselecteerde beperkingen @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Schetsen - + Toggle reference/driving constraint Schakel referentie-/aandrijvingsbeperking om - + Toggles the toolbar or selected constraints to/from reference mode Schakelt tussen de werkbalk of de geselecteerde beperkingen van/naar de referentiemodus @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Schetsen - + Trim edge Inkorten van rand - + Trim an edge with respect to the picked position Trim een rand ten opzichte van de gekozen positie @@ -1952,47 +1952,47 @@ Autoconstrain error: Defecte schets tijdens aanleggen van gelijkheids-constraint. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Niet in staat om het snijpunt van de bochten te raden. Probeer een samenvallende beperking toe te voegen tussen de vertexen van de curven die u wilt afronden. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Deze versie van OCE/OCC ondersteunt de knoopbewerking niet. U hebt 6.9.0 of hoger nodig. - + BSpline Geometry Index (GeoID) is out of bounds. B-spline Geometrie Index (GeoID) buiten bereik. - + You are requesting no change in knot multiplicity. U vraagt geen verandering in de knobbelmultipliciteit. - + The Geometry Index (GeoId) provided is not a B-spline curve. De Geometrie Index (Geold) aangeleverd is geen B-spline lijn. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. De knoop-index is buiten de grenzen. Merk op dat volgens de OCC-notatie de eerste knoop index 1 heeft en niet nul. - + The multiplicity cannot be increased beyond the degree of the B-spline. De veelvouds-getal mag niet groter zijn dan het aantal graden van de B-spline. - + The multiplicity cannot be decreased beyond zero. De multipliciteit kan niet lager zijn dan nul. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is niet in staat om de multipliciteit binnen de maximale tolerantie te verlagen. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Selecteer rand(en) uit de schets. - - - - + + + + Dimensional constraint Dimensionale beperking @@ -2232,273 +2232,273 @@ Eén van de geselecteerde moet deel uitmaken van de schets - - + + Select an edge from the sketch. Selecteer een rand van de schets. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Onmogelijk beperking - - - - + + + + The selected edge is not a line segment De geselecteerde rand is niet een lijnstuk - - - - - - + + + + + + Double constraint Dubbele beperking - - - - + + + + The selected edge already has a horizontal constraint! De geselecteerde rand heeft al een horizontale constraint! - - - - + + + + The selected edge already has a vertical constraint! De geselecteerde rand heeft al een vertikale constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! De geselecteerde rand heeft al een blok constraint! - + The selected item(s) can't accept a horizontal constraint! De geselecteerde voorwerp(en) kunnen geen horizontale beperking aannemen! - + There are more than one fixed point selected. Select a maximum of one fixed point! Er zijn meer dan één vaste punt geselecteerd. Selecteer een maximum van één vast punt! - + The selected item(s) can't accept a vertical constraint! De geselcteerde voorwerp(en) kunnen geen verticale beperking aannemen! - + There are more than one fixed points selected. Select a maximum of one fixed point! Er zijn meer dan één vaste punten geselecteerd. Selecteer een maximum van één vast punt! - - + + Select vertices from the sketch. Selecteer vertexen vanuit de schets. - + Select one vertex from the sketch other than the origin. Kies een andere vertex uit de schets dan de oorsprong. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selecteer alleen vertexen uit de schets. De laatst gekozen vertex kan de oorsprong zijn. - + Wrong solver status Verkeerde oplosserstatus - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Een Blok constraint kan niet worden geplaatst als de schets nog niet is herberekend of er overbodige en/of tegenstrijdige constrains aanwezig zijn. - + Select one edge from the sketch. Selecteer een rand uit de schets. - + Select only edges from the sketch. Selecteer enkel randen uit de schets. - - - - - - - + + + + + + + Error Fout - + Select two or more points from the sketch. Selecteer twee of meer punten uit de schets. - - + + Select two or more vertexes from the sketch. Selecteer twee of meer hoekpunten van de schets. - - + + Constraint Substitution Beperk vervanging - + Endpoint to endpoint tangency was applied instead. Eindpunt tot eindpunttangens werd in plaats daarvan toegepast. - + Select vertexes from the sketch. Selecteer (hoek)punten van de schets. - - + + Select exactly one line or one point and one line or two points from the sketch. Selecteer precies één lijn of een punt en een lijn of twee punten uit de schets. - + Cannot add a length constraint on an axis! Een lengtebeperking is niet mogelijk op een as! - + This constraint does not make sense for non-linear curves Deze beperking heeft geen zin voor niet-lineaire curven - - - - - - + + + + + + Select the right things from the sketch. Selecteer de juiste elementen uit de schets. - - + + Point on B-spline edge currently unsupported. Punt op B-splinerand momenteel niet ondersteund. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Geen van de geselecteerde punten werd beperkt tot de respectievelijke curven, ofwel omdat ze deel uitmaken van hetzelfde element, ofwel omdat ze beide externe geometrie zijn. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Selecteer een punt en meerdere curven of een curve en meerdere punten. U hebt %1 curves en %2 punten geselecteerd. - - - - + + + + Select exactly one line or up to two points from the sketch. Selecteer precies een lijn of tot twee punten uit de schets. - + Cannot add a horizontal length constraint on an axis! Een horizontale lengtebeperking is niet mogelijk op een as! - + Cannot add a fixed x-coordinate constraint on the origin point! Kan geen gefixeerd x-coördinaat constraint plaatsen op het punt van oorsprong! - - + + This constraint only makes sense on a line segment or a pair of points Deze beperking heeft alleen zin op een lijnsegment of een paar punten - + Cannot add a vertical length constraint on an axis! Een verticale lengtebeperking is niet mogelijk op een as! - + Cannot add a fixed y-coordinate constraint on the origin point! Kan geen gefixeerd y-coördinaat constraint plaatsen op het punt van oorsprong! - + Select two or more lines from the sketch. Selecteer twee of meer lijnen van de schets. - - + + Select at least two lines from the sketch. Kies tenminste twee lijnen van de schets. - + Select a valid line Selecteer een geldige lijn - - + + The selected edge is not a valid line De geselecteerde rand is geen geldige lijn - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunten; twee curven en een punt. - + Select some geometry from the sketch. perpendicular constraint Selecteer wat geometrie uit schets. - + Wrong number of selected objects! perpendicular constraint Verkeerd aantal geselecteerde objecten! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Met 3 objecten moeten er 2 curven en 1 punt zijn. - - + + Cannot add a perpendicularity constraint at an unconnected point! Kan geen loodrechtheidsbeperking toevoegen op een niet-verbonden punt! - - - + + + Perpendicular to B-spline edge currently unsupported. Loodrecht op B-splinerand wordt momenteel niet ondersteund. - - + + One of the selected edges should be a line. Eén van de geselecteerde randen moet een lijn zijn. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunten; twee curven en een punt. - + Select some geometry from the sketch. tangent constraint Selecteer wat geometrie uit schets. - + Wrong number of selected objects! tangent constraint Verkeerd aantal geselecteerde objecten! - - - + + + Cannot add a tangency constraint at an unconnected point! Een raakbeperking kan niet worden toegevoegd aan een los punt! - - - + + + Tangency to B-spline edge currently unsupported. Tanges op B-splinerand momenteel niet ondersteund. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint op endpointtangens werd toegepast. De toevallige beperking werd verwijderd. - - - - + + + + Select one or more arcs or circles from the sketch. Selecteer een of meer bogen of cirkels uit de schets. - - + + Constrain equal Gelijke beperken - + Do you want to share the same radius for all selected elements? Wil je dezelfde straal voor alle geselecteerde elementen? - - + + Constraint only applies to arcs or circles. Beperkingen gelden alleen voor bogen en cirkels. - + Do you want to share the same diameter for all selected elements? Wilt u dezelfde diameter voor alle geselecteerde elementen delen? - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecteer een of twee lijnen uit de schets. Of selecteer twee randen en een punt. - - + + Parallel lines Parallellen lijnen - - + + An angle constraint cannot be set for two parallel lines. Een hoekbeperking kan niet worden ingesteld voor twee parallelle lijnen. - + Cannot add an angle constraint on an axis! Een hoekbeperking op een as is niet mogelijk! - + Select two edges from the sketch. Selecteer twee randen van de schets. - - + + Select two or more compatible edges Selecteer twee of meer compatibele randen - + Sketch axes cannot be used in equality constraints Schetsassen kunnen niet worden gebruikt bij gelijkheidsbeperkingen - + Equality for B-spline edge currently unsupported. Gelijkheid voor B-splinerand momenteel niet ondersteund. - - + + Select two or more edges of similar type Selecteer twee of meer randen van hetzelfde type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecteer twee punten en een symmetrie-lijn, twee punten en een symmetrie-punt of een lijn en een symmetrie-punt uit de schets. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Kan geen symmetriebeperking tussen een lijn en zijn eindpunten toevoegen! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selecteer twee eindpunten van lijnen die als stralen fungeren, en een rand die een grens vertegenwoordigt. Het eerste geselecteerde punt komt overeen met index n1, tweede - met n2, en de nulpuntwaarde stelt de verhouding n2/n1 in. - + Selected objects are not just geometry from one sketch. Geselecteerde objecten zijn niet slechts geometrie uit één schets. - + Number of selected objects is not 3 (is %1). Aantal geselecteerde objecten is niet 3 (is %1). - + Cannot create constraint with external geometry only!! Geen constraint mogelijk met alleen externe geometrie!! - + Incompatible geometry is selected! Incompatibele geometrie is geselecteerd! - + SnellsLaw on B-spline edge currently unsupported. Wet van Snellius op B-splinerand momenteel niet ondersteund. - - + + Select at least one ellipse and one edge from the sketch. Selecteer ten minste één ellips en één rand van de schets. - + Sketch axes cannot be used in internal alignment constraint Schetsassen kunnen niet worden gebruikt bij interne uitlijningsbeperkingen - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Geen interne constraint aan 2 eplisen mogelijk. Seleciteer één elips. - - + + Maximum 2 points are supported. Maximaal 2 punten worden ondersteund. - - + + Maximum 2 lines are supported. Maximaal 2 lijnen worden ondersteund. - - + + Nothing to constrain Niets vast te leggen - + Currently all internal geometry of the ellipse is already exposed. Momenteel is alle interne geometrie van de ellips al zichtbaar. - - - - + + + + Extra elements Extra element - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Er zijn meer elementen dan mogelijk is voor de gegeven ellips. Deze werden genegeerd. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. U kunt een ellipsboog niet van binnenuit inperken op een andere ellipsboog. Selecteer slechts één ellipsboog. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Geen interne constraint aan elips aan andere elipsboog. Selecteer één elips Of elipsboog. - + Currently all internal geometry of the arc of ellipse is already exposed. Momenteel is alle interne geometrie van de ellipsboog al zichtbaar. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Er zijn meer elementen dan mogelijk is voor de gegeven ellipsboog. Deze werden genegeerd. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Momenteel wordt de interne geometrie alleen ondersteund voor ellips of ellipsboog. Het laatst geselecteerde element moet een ellips of een ellipsboog zijn. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Selecteer beperking(en) uit de schets. - + CAD Kernel Error CAD-kernelfout @@ -2941,42 +2941,42 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Het duplicaat zou een cirkelvormige afhankelijkheid veroorzaken. - + This object is in another document. Dit object is in een ander document. - + This object belongs to another body. Hold Ctrl to allow cross-references. Dit object behoort tot een ander lichaam. Houd Ctrl ingedrukt om kruisverwijzingen toe te staan. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Dit object behoort tot een ander lichaam en het bevat externe geometrie. kruisverwijzingen zijn niet toegestaan. - + This object belongs to another part. Dit object behoort tot een ander deel. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. De geselecteerde schets is niet parallel aan deze schets. Houd Ctrl + Alt om niet-parallel schetsen toe te staan. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. De XY-assen van de geselecteerde schets hebben niet dezelfde richting als deze schets. Houd Ctrl+Alt ingedrukt om het te negeren. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. De oorsprong van de gekozen schets is niet uitgelijnd met de oorsprong van deze schets. Houd Ctrl+Alt ingedrukt om deze schets te negeren. @@ -3062,8 +3062,8 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Voeg straal in - - + + Radius: Straal: @@ -3074,8 +3074,8 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Diameter invoeren - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Lengte: - - + + Change radius Straal wijzigen - - + + Change diameter Diameter wijzigen - + Refractive index ratio Brekingsindexverhouding - + Ratio n2/n1: Verhouding n2/n1: @@ -3136,22 +3136,22 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Door dit te koppelen ontstaat er een cirkelvormige afhankelijkheid. - + This object is in another document. Dit object is in een ander document. - + This object belongs to another body, can't link. Dit object behoort tot een ander lichaam, geen koppeling mogelijk. - + This object belongs to another part, can't link. Dit object behoort tot een ander deel, geen koppeling mogelijk. @@ -3192,8 +3192,8 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt SketcherGui::PropertyConstraintListItem - - + + Unnamed Naamloos @@ -3912,6 +3912,26 @@ Er zijn echter geen beperkingen gevonden die verband houden met de eindpunten.All constraints that deal with external geometry were deleted. Alle beperkingen die verband houden met de externe geometrie werden verwijderd. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Validatie van de schetser - + Invalid constraints Ongeldige beperkingen - - + + + Fix Herstellen - - + + + Find Zoek - + Delete constraints to external geom. Verwijder beperkingen van de externe geom. - + Missing coincidences Ontbrekende coïncidenties - + Tolerance: Tolerantie: - + Highlight open vertexes Markeer open vertexes - + Ignore construction geometry Bouwgeometrie negeren + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Omgekeerde externe geometrie - + Swap endpoints in constraints Wissel eindpunten in de beperkingen om - + Constraint orientation locking Vergrendeling van de beperkingensoriëntatie - + Enable/Update Inschakelen/updaten - + Disable Uitschakelen @@ -4329,104 +4356,104 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn SketcherGui::ViewProviderSketch - + Edit sketch Schets bewerken - + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? - + Invalid sketch Ongeldige schets - + Do you want to open the sketch validation tool? Wilt u het schetsvalidatiegereedschap openen? - + The sketch is invalid and cannot be edited. De schets is ongeldig en kan niet worden bewerkt. - + Please remove the following constraint: Gelieve de volgende beperking te verwijderen: - + Please remove at least one of the following constraints: Gelieve minstens één van de volgende beperkingen te verwijderen: - + Please remove the following redundant constraint: Gelieve de volgende overbodige beperking te verwijderen: - + Please remove the following redundant constraints: Gelieve de volgende overbodige beperkingen te verwijderen: - + Empty sketch Lege schets - + Over-constrained sketch Overbeperkte schets - - - + + + (click to select) (Klik om te selecteren) - + Sketch contains conflicting constraints Schets bevat conflicterende beperkingen - + Sketch contains redundant constraints Schets bevat overbodige beperkingen - + Fully constrained sketch Volledig beperkte schets - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Onderbeperkte schets met <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 graad</span></a> van vrijheid - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Onderbeperkte schets met <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graad</span></a> van vrijheid - + Solved in %1 sec Opgelost in %1 s - + Unsolved (%1 sec) Onopgelost (%1 s) @@ -4515,8 +4542,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Zet de diameter van een cirkel of een boog vast @@ -4524,8 +4551,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc De straal van een cirkel of boog vastzetten @@ -4542,8 +4569,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Maak een boog door zijn eindpunten en een punt langs de boog @@ -4551,8 +4578,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Maak een cirkel door 3 randpunten @@ -4560,8 +4587,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateArc - - + + Create an arc by its center and by its end points Maak een boog door zijn eindpunten en een punt langs de boog @@ -4569,8 +4596,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Maak een ellipsboog door zijn midden, hoofdstraal, eindpunten @@ -4578,8 +4605,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Maak een hyperbolische boog via zijn midden, hoofdstraal en eindpunten @@ -4587,8 +4614,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Maak een paraboolboog door zijn focus, hoekpunten, eindpunten @@ -4596,13 +4623,13 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateBSpline - + B-spline by control points B-spline via controlepunten - - + + Create a B-spline by control points Maak een B-spline via controlepunten @@ -4610,8 +4637,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Maak een cirkel door zijn midden en een randpunt @@ -4619,8 +4646,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Maak een ellips door de periapsis, apoapsis en substraal @@ -4628,8 +4655,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Maak een ellips door zijn midden, hoofdstraal en punt @@ -4637,8 +4664,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Maak een zevenhoek door zijn midden en door een hoek @@ -4646,8 +4673,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Maak een zeshoek door zijn midden en door een hoek @@ -4655,14 +4682,14 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Maak een achthoek door zijn midden en door een hoek - - + + Create a regular polygon by its center and by one corner Maak een regelmatige veelhoek door zijn midden en door een hoek @@ -4670,8 +4697,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Maak een vijfhoek door zijn midden en door een hoek @@ -4679,8 +4706,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateSquare - - + + Create a square by its center and by one corner Maak een vierkant door zijn midden en door een hoek @@ -4688,8 +4715,8 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Maak een gelijkzijdige driehoek door zijn midden en door een hoek @@ -4697,13 +4724,13 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodieke B-spline via controlepunten - - + + Create a periodic B-spline by control points Maak een periodieke B-spline via controlepunten diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm index 5993a16339..9df8d2d9c9 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts index 0f65ae647e..19ae1b92e1 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Skisse - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Skisse - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Constrain radius - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Skisse - + Create arc Lag bue - + Create an arc in the sketcher Create an arc in the sketcher - + Center and end points Center and end points - + End points and rim point End points and rim point @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Skisse - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Skisse - + Create circle Lag sirkel - + Create a circle in the sketcher Create a circle in the sketcher - + Center and rim point Center and rim point - + 3 rim points 3 punkt på sirkel @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Skisse - + Create a conic Create a conic - + Create a conic in the sketch Create a conic in the sketch - + Ellipse by center, major radius, point Ellipse by center, major radius, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse by Periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Skisse - + Create regular polygon Create regular polygon - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Trekant - + Square Firkant - + Pentagon Pentagon - + Hexagon Sekskant - + Heptagon Heptagon - + Octagon Octagon - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Skisse - + Constrain angle Constrain angle - + Fix the angle of a line or the angle between two lines Fix the angle of a line or the angle between two lines @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Skisse - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Skisse - + Constrain coincident Lås forhold - + Create a coincident constraint on the selected item Lag en lås i forhold til valgte objekt @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Skisse - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Skisse - + Constrain distance Lås avstand - + Fix a length of a line or the distance between a line and a vertex Fikser lengde på en linje eller avstanden mellom en linje og en node @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Skisse - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fix the horizontal distance between two points or line ends @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Skisse - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fix the vertical distance between two points or line ends @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Skisse - + Constrain equal Constrain equal - + Create an equality constraint between two lines or between circles and arcs Create an equality constraint between two lines or between circles and arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Skisse - + Constrain horizontally Lås horisontalt - + Create a horizontal constraint on the selected item Lag en horisontal lås på det merkede elementet @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skisse - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Skisse - + Constrain lock Lås - + Create a lock constraint on the selected item Create a lock constraint on the selected item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Skisse - + Constrain parallel Lås parallell - + Create a parallel constraint between two lines Lag en parallell lås mellom to linjer @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Skisse - + Constrain perpendicular Constrain perpendicular - + Create a perpendicular constraint between two lines Create a perpendicular constraint between two lines @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skisse - + Constrain point onto object Constrain point onto object - + Fix a point onto an object Fix a point onto an object @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Skisse - + Constrain radius Constrain radius - + Fix the radius of a circle or an arc Fix the radius of a circle or an arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skisse - + Constrain refraction (Snell's law') Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Skisse - + Constrain symmetrical Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points with respect to a line or a third point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Skisse - + Constrain tangent Constrain tangent - + Create a tangent constraint between two entities Create a tangent constraint between two entities @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Skisse - + Constrain vertically Lås vertikalt - + Create a vertical constraint on the selected item Lag en vertikal lås på valgt element @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Skisse - + Create arc by three points Create arc by three points - + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Skisse - + Create circle by three points Create circle by three points - + Create a circle by 3 perimeter points Create a circle by 3 perimeter points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Skisse - + Create arc by center Create arc by center - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Skisse - + Create an arc of ellipse Create an arc of ellipse - + Create an arc of ellipse in the sketch Create an arc of ellipse in the sketch @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Skisse - + Create an arc of hyperbola Create an arc of hyperbola - + Create an arc of hyperbola in the sketch Create an arc of hyperbola in the sketch @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Skisse - + Create an arc of parabola Create an arc of parabola - + Create an arc of parabola in the sketch Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Skisse - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Skisse - + Create circle Lag sirkel - + Create a circle in the sketch Lag en sirkel i skissen @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Skisse - + Create draft line Lag skisselinje - + Create a draft line in the sketch Lag en linje i skissen @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Skisse - + Create ellipse by 3 points Create ellipse by 3 points - + Create an ellipse by 3 points in the sketch Create an ellipse by 3 points in the sketch @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Skisse - + Create ellipse by center Create ellipse by center - + Create an ellipse by center in the sketch Create an ellipse by center in the sketch @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Skisse - + Create fillet Create fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Skisse - + Create heptagon Create heptagon - + Create a heptagon in the sketch Create a heptagon in the sketch @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Skisse - + Create hexagon Create hexagon - + Create a hexagon in the sketch Create a hexagon in the sketch @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Skisse - + Create line Lag linje - + Create a line in the sketch Lag en linje i skissen @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Skisse - + Create octagon Create octagon - + Create an octagon in the sketch Create an octagon in the sketch @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Skisse - + Create pentagon Create pentagon - + Create a pentagon in the sketch Create a pentagon in the sketch @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Skisse - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Skisse - + Create point Lag punkt - + Create a point in the sketch Lag et punkt i skissen @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Skisse - + Create polyline Lag polylinje - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Skisse - + Create rectangle Lag rektangel - + Create a rectangle in the sketch Lag et rektangel i skissen @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Skisse - + Create regular polygon Create regular polygon - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Skisse - + Create slot Create slot - + Create a slot in the sketch Create a slot in the sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Skisse - + Create square Create square - + Create a square in the sketch Create a square in the sketch @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Skisse - + Create text Lag tekst - + Create text in the sketch Lag tekst i skissen @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Skisse - + Create equilateral triangle Create equilateral triangle - + Create an equilateral triangle in the sketch Create an equilateral triangle in the sketch @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Skisse - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Skisse - + External geometry External geometry - + Create an edge linked to an external geometry Create an edge linked to an external geometry @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Skisse - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Skisse - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Skisse - + Trim edge Trim edge - + Trim an edge with respect to the picked position Trim an edge with respect to the picked position @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Select edge(s) from the sketch. - - - - + + + + Dimensional constraint Dimensional constraint @@ -2232,273 +2232,273 @@ One of the selected has to be on the sketch - - + + Select an edge from the sketch. Velg en kant i skissen. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Umulig lås - - - - + + + + The selected edge is not a line segment The selected edge is not a line segment - - - - - - + + + + + + Double constraint Dobbel lås - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! The selected item(s) can't accept a horizontal constraint! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! The selected item(s) can't accept a vertical constraint! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Feil - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Velg node i skissen. - - + + Select exactly one line or one point and one line or two points from the sketch. Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an axis! Cannot add a length constraint on an axis! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an axis! Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Select two or more lines from the sketch. - - + + Select at least two lines from the sketch. Select at least two lines from the sketch. - + Select a valid line Select a valid line - - + + The selected edge is not a valid line The selected edge is not a valid line - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. perpendicular constraint Select some geometry from the sketch. - + Wrong number of selected objects! perpendicular constraint Wrong number of selected objects! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint With 3 objects, there must be 2 curves and 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. One of the selected edges should be a line. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Select some geometry from the sketch. - + Wrong number of selected objects! tangent constraint Wrong number of selected objects! - - - + + + Cannot add a tangency constraint at an unconnected point! Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Select one or more arcs or circles from the sketch. - - + + Constrain equal Constrain equal - + Do you want to share the same radius for all selected elements? Do you want to share the same radius for all selected elements? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines Parallel lines - - + + An angle constraint cannot be set for two parallel lines. En vinkel begrensning kan ikke angis for to parallelle linjer. - + Cannot add an angle constraint on an axis! Cannot add an angle constraint on an axis! - + Select two edges from the sketch. Select two edges from the sketch. - - + + Select two or more compatible edges Select two or more compatible edges - + Sketch axes cannot be used in equality constraints Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Select two or more edges of similar type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). Number of selected objects is not 3 (is %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Incompatible geometry is selected! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint Sketch axes cannot be used in internal alignment constraint - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Maximum 2 points are supported. - - + + Maximum 2 lines are supported. Maximum 2 lines are supported. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select constraint(s) from the sketch. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - - + + Radius: Radius: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Lengde: - - + + Change radius Change radius - - + + Change diameter Change diameter - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Ratio n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Uten navn @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4070,7 +4090,7 @@ However, no constraints linking to the endpoints were found. Point - Point + Punkt @@ -4148,7 +4168,7 @@ However, no constraints linking to the endpoints were found. BSpline - BSpline + BSpline @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher validation - + Invalid constraints Invalid constraints - - + + + Fix Fix - - + + + Find Find - + Delete constraints to external geom. Delete constraints to external geom. - + Missing coincidences Missing coincidences - + Tolerance: Tolerance: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Enable/Update - + Disable Disable @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Rediger skisse - + A dialog is already open in the task panel En dialog er allerede åpent i oppgavepanelet - + Do you want to close this dialog? Ønsker du å lukke denne dialogen? - + Invalid sketch Invalid sketch - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Please remove the following constraint: - + Please remove at least one of the following constraints: Please remove at least one of the following constraints: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + Empty sketch Empty sketch - + Over-constrained sketch Over-constrained sketch - - - + + + (click to select) (Klikk for å velge) - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fix the radius of a circle or an arc @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Create an arc of ellipse by its center, major radius, endpoints @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Create a circle by its center and by a rim point @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Create a heptagon by its center and by one corner @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Create a hexagon by its center and by one corner @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Create a pentagon by its center and by one corner @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Create a square by its center and by one corner @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Create an equilateral triangle by its center and by one corner @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm index 3777c6a0ee..376bd02e26 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 1b538a8d4e..0fdae4a54e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Szkicownik - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Kopiuje geometrię innego szkicu @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Szkicownik - + Constrain arc or circle Zwiąż łuk lub okrąg - + Constrain an arc or a circle Zwiąż łuk lub okrąg - + Constrain radius Wiązanie promienia - + Constrain diameter Zwiąż średnicę @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Szkicownik - + Create arc Tworzenie łuku - + Create an arc in the sketcher Utwórz łuk w szkicowniku - + Center and end points Punkt środkowy i punkty końcowe - + End points and rim point Punkty końcowe i punkt na obwodzie @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Szkicownik - + Create a B-spline Utwórz B-spline - + Create a B-spline in the sketch Utwórz B-spline na rysunku @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Szkicownik - + Create circle - Tworzenie okręgu + Utwórz okrąg - + Create a circle in the sketcher Utwórz okrąg w szkicowniku - + Center and rim point Punkt środkowy i na obwodzie - + 3 rim points 3 punkty na obwodzie @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Szkicownik - + Create a conic Utwórz krzywą stożkową - + Create a conic in the sketch Utwórz krzywą stożkową w szkicu - + Ellipse by center, major radius, point Elipsa przez środek, główny promień, punkt - + Ellipse by Periapsis, apoapsis, minor radius Elipsa przez Periapsis, apoapsis, mniejszy promień - + Arc of ellipse by center, major radius, endpoints Łuk elipsy ze środka, półosi wielkiej, punktów końcowych - + Arc of hyperbola by center, major radius, endpoints Łuk hiperboli ze środka, wierzchołka, punktów końcowych - + Arc of parabola by focus, vertex, endpoints Łuk paraboli z ogniska, wierzchołka, punktów końcowych @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Szkicownik - + Create regular polygon Utwórz wielokąt foremny - + Create a regular polygon in the sketcher Stwórz wielokąt foremny w szkicowniku - + Triangle Trójkąt - + Square Kwadrat - + Pentagon Pięciokąt - + Hexagon Sześciokąt - + Heptagon Siedmiokąt - + Octagon Ośmiokąt - + Regular Polygon Wielokąt @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Szkicownik - + Constrain angle Wiązanie kąta - + Fix the angle of a line or the angle between two lines Ustaw kąt linii lub kąt pomiędzy 2 liniami @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Szkicownik - + Constrain Block Zwiąż Blok - + Create a Block constraint on the selected item Utwórz wiązanie Bloku dla wybranego elementu @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Szkicownik - + Constrain coincident Wiązanie zgodności - + Create a coincident constraint on the selected item Utwórz wiązanie zgodności na wybranym elemencie @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Szkicownik - + Constrain diameter Zwiąż średnicę - + Fix the diameter of a circle or an arc Ustal średnicę okręgu lub łuku @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Szkicownik - + Constrain distance Wiązanie odległości - + Fix a length of a line or the distance between a line and a vertex Ustal długość linii lub odległość pomiędzy linią a wierzchołkiem @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Szkicownik - + Constrain horizontal distance - Powiąż odległość poziomą + Zwiąż odległość poziomą - + Fix the horizontal distance between two points or line ends Ustal poziomą odległość między dwoma punktami lub końcami linii @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Szkicownik - + Constrain vertical distance - Constrain vertical distance + Zwiąż odległość pionową - + Fix the vertical distance between two points or line ends Ustal pionową odległość między dwoma punktami lub końcami linii @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Szkicownik - + Constrain equal Wiązanie równości - + Create an equality constraint between two lines or between circles and arcs Utworzyć ograniczenie równości między dwie linie, okręgi lub łuki @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Szkicownik - + Constrain horizontally - Wiązanie poziome + Zwiąż w poziomie - + Create a horizontal constraint on the selected item Utwórz wiązanie poziome na wybranym elemencie @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Szkicownik - + Constrain InternalAlignment Zwiąż WewnętrzneWyrównanie - + Constrains an element to be aligned with the internal geometry of another element Wiąże element do wyrównania z wewnętrzną geometrią innego elementu @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Szkicownik - + Constrain lock Blokada wiązania - + Create a lock constraint on the selected item Utwórz blokadę wiązania dla wybranego elementu @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Szkicownik - + Constrain parallel Wiązanie równoległości - + Create a parallel constraint between two lines Utwórz więz równoległości pomiędzy dwoma liniami @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Szkicownik - + Constrain perpendicular Wiązanie prostopadłości - + Create a perpendicular constraint between two lines Utwórz więż prostopadłości między dwiema liniami @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Szkicownik - + Constrain point onto object Wiązanie punkt na obiekcie - + Fix a point onto an object Ustaw punkt na obiekcie @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Szkicownik - + Constrain radius Wiązanie promienia - + Fix the radius of a circle or an arc Ustalenie promienia okręgu lub łuku @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Szkicownik - + Constrain refraction (Snell's law') Zwiąż refrakcję (prawo Snell'a) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Utwórz wiązanie prawa refrakcji (prawo Snell'a) między dwoma punktami końcowymi promieni i krawędzią jako interfejsem. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Szkicownik - + Constrain symmetrical Wiązanie symetryczności - + Create a symmetry constraint between two points with respect to a line or a third point Utwórz więż symetrii między dwoma punktami w odniesieniu do linii lub trzeciego punktu @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Szkicownik - + Constrain tangent Wiązanie styczności - + Create a tangent constraint between two entities Utwórz styczną pomiędzy dwoma elementami @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Szkicownik - + Constrain vertically - Wiązanie pionowe + Zwiąż w pionie - + Create a vertical constraint on the selected item Utwórz wiązanie pionowe na wybranym elemencie @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Szkicownik - + Create arc by three points Utwórz łuk przez trzy punkty - + Create an arc by its end points and a point along the arc Utwórz łuk z punktów końcowych i punkt na łuku @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Szkicownik - + Create circle by three points Utwórz okrąg przez trzy punkty - + Create a circle by 3 perimeter points Utwórz okrąg przez trzy punkty na obwodzie @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Szkicownik - + Create arc by center Utwórz łuk ze środka - + Create an arc by its center and by its end points Utwórz łuk ze środka i punktów końcowych @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Szkicownik - + Create an arc of ellipse Utwórz łuk elipsy - + Create an arc of ellipse in the sketch Utwórz łuk elipsy na rysunku @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Szkicownik - + Create an arc of hyperbola Utwórz łuk hiperboli - + Create an arc of hyperbola in the sketch Utwórz łuk hiperboli na rysunku @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Szkicownik - + Create an arc of parabola Utwórz łuk paraboli - + Create an arc of parabola in the sketch Utwórz łuk paraboli na rysunku @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Szkicownik - + Create B-spline Utwórz B-spline - + Create a B-spline via control points in the sketch. Utwórz B-spline poprzez punkty kontrolne na rysunku. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Szkicownik - + Create circle - Tworzenie okręgu + Utwórz okrąg - + Create a circle in the sketch Utwórz okrąg na szkicu @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Szkicownik - + Create draft line Utwórz linię projektu - + Create a draft line in the sketch Utworzyć linię projektu w szkicu @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Szkicownik - + Create ellipse by 3 points Utwórz elipsę względem 3 punktów - + Create an ellipse by 3 points in the sketch Utwórz elipsę względem 3 punktów na szkicu @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Szkicownik - + Create ellipse by center Utwórz elipsę względem środka - + Create an ellipse by center in the sketch Utwórz elipsę względem środka szkicu @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Szkicownik - + Create fillet Utwórz zaokrąglenie - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Szkicownik - + Create heptagon Utwórz siedmiokąt - + Create a heptagon in the sketch Utwórz siedmiokąt na szkicu @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Szkicownik - + Create hexagon Utwórz sześciokąt - + Create a hexagon in the sketch Utwórz sześciokąt na szkicu @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Szkicownik - + Create line - Tworzenie linii + Utwórz linię - + Create a line in the sketch Utwórz linię na szkicu @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Szkicownik - + Create octagon Utwórz ośmiokąt - + Create an octagon in the sketch Utwórz ośmiokąt na szkicu @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Szkicownik - + Create pentagon Utwórz pięciokąt - + Create a pentagon in the sketch Utwórz pięciokąt na szkicu @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Szkicownik - + Create periodic B-spline Utwórz okresowy b-spline - + Create a periodic B-spline via control points in the sketch. Utwórz okresowy B-spline przez punkty kontrolne na rysunku. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Szkicownik - + Create point - Tworzenie punktu + Utwórz punkt - + Create a point in the sketch Utwórz punkt na szkicu @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Szkicownik - + Create polyline - Tworzenie łamanej + Utwórz linię łamaną - + Create a polyline in the sketch. 'M' Key cycles behaviour Utwórz polilinię w szkicu. Przycisk 'M' przełącza zachowanie @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Szkicownik - + Create rectangle - Tworzenie prostokątu + Utwórz prostokąt - + Create a rectangle in the sketch Utwórz prostokąt na szkicu @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Szkicownik - + Create regular polygon Utwórz wielokąt foremny - + Create a regular polygon in the sketch Utwórz zwykły wielokąt na rysunku @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Szkicownik - + Create slot Utwórz szczelinę - + Create a slot in the sketch Utwórz szczelinę w szkicu @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Szkicownik - + Create square Utwórz kwadrat - + Create a square in the sketch Utwórz kwadrat na szkicu @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Szkicownik - + Create text - Tworzenie tekstu + Utwórz tekst - + Create text in the sketch Utwórz tekst na szkicu @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Szkicownik - + Create equilateral triangle Utwórz trójkąt równoboczny - + Create an equilateral triangle in the sketch Utwórz trójkąt równoboczny w szkicu @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Szkicownik - + Extend edge Wyciągnij krawędź - + Extend an edge with respect to the picked position Rozszerz krawędź w stosunku do wybranej pozycji @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Szkicownik - + External geometry Geometria zewnętrzna - + Create an edge linked to an external geometry Utwórz krawędź związaną z zewnętrzną geometrią @@ -1441,7 +1441,7 @@ Map sketch to face... - Zmapuj szkic na ścianę... + Mapuj szkic na powierzchnię... @@ -1530,7 +1530,7 @@ Create sketch - Tworzenie szkicu + Utwórz szkic @@ -1734,12 +1734,12 @@ Stop operation - Stop operation + Zatrzymaj operację Stop current operation - Stop current operation + Zatrzymaj bieżącą operację @@ -1781,19 +1781,19 @@ CmdSketcherToggleActiveConstraint - + Sketcher Szkicownik - + Toggle activate/deactivate constraint - Toggle activate/deactivate constraint + Aktywuj/dezaktywuj wiązanie - + Toggles activate/deactivate state for selected constraints - Toggles activate/deactivate state for selected constraints + Aktywuje/dezaktywuje zaznaczone wiązania @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Szkicownik - + Toggle reference/driving constraint Przełącz wiązanie referencji/napędu - + Toggles the toolbar or selected constraints to/from reference mode Przełącza pasek narzędzi lub wybrane wiązania do/z trybu odniesienia @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Szkicownik - + Trim edge Przytnij krawędź - + Trim an edge with respect to the picked position Przytnij krawędź w odniesieniu do wybranej pozycji @@ -1888,7 +1888,7 @@ View section - Zobacz przekrój + Widok przekroju @@ -1952,47 +1952,47 @@ Błąd więzów automatycznych: Nierozwiązywalny szkic po zastosowaniu wiązania równości. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Nie można ustalić punktu przecięcia krzywych. Spróbuj dodać wiązanie zgodności między wierzchołkami krzywych, które zamierzasz zaokrąglić. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ta wersja OCE/OCC nie obsługuje operacji węzła. Potrzebujesz wersji 6.9.0 lub wyższej. - + BSpline Geometry Index (GeoID) is out of bounds. Indeks geometrii B-Spline (GeoID) jest poza wiązaniem. - + You are requesting no change in knot multiplicity. Żądasz niezmienności w wielokrotności węzłów. - + The Geometry Index (GeoId) provided is not a B-spline curve. Podany indeks geometrii B-Spline (GeoId) nie jest krzywą B-Spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indeks węzłów jest poza wiązaniem. Zauważ, że zgodnie z zapisem OCC, pierwszy węzeł ma indeks 1, a nie zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. Wielokrotność nie może być zwiększona poza stopień B-spline. - + The multiplicity cannot be decreased beyond zero. Wielokrotność nie może być zmniejszona poniżej zera. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC nie jest w stanie zmniejszyć wielokrotności w ramach maksymalnej tolerancji. @@ -2002,7 +2002,7 @@ Appearance - Wygląd + Wygląd zewnętrzny @@ -2043,7 +2043,7 @@ Sketch mapping - Mapowanie rysunku + Mapowanie szkicu @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Wybierz krawędź(ie) na szkicu - - - - + + + + Dimensional constraint Wiązanie wymiaru @@ -2232,273 +2232,273 @@ Jedno z zaznaczonych musi być na szkicu - - + + Select an edge from the sketch. Wybierz krawędź ze szkicu. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Niemożliwe ograniczenie - - - - + + + + The selected edge is not a line segment Zaznaczona krawędź nie jest segmentem linii - - - - - - + + + + + + Double constraint Zdublowane wiązanie - - - - + + + + The selected edge already has a horizontal constraint! Wybrana krawędź ma już wiązanie poziome! - - - - + + + + The selected edge already has a vertical constraint! Wybrana krawędź ma już wiązanie pionowe! - - - - - - + + + + + + The selected edge already has a Block constraint! Wybrana krawędź ma już wiązanie blokowe! - + The selected item(s) can't accept a horizontal constraint! Wybrane detale nie mogą zaakceptować ograniczenia poziomego! - + There are more than one fixed point selected. Select a maximum of one fixed point! Wybrano więcej niż jeden stały punkt. Wybierz maksymalnie jeden stały punkt! - + The selected item(s) can't accept a vertical constraint! Wybrane detale nie mogą zaakceptować ograniczenia pionowego! - + There are more than one fixed points selected. Select a maximum of one fixed point! Wybrano więcej niż jeden ustalony punkt. Wybierz maksymalnie jeden ustalony punkt! - - + + Select vertices from the sketch. Wybierz wierzchołki ze szkicu. - + Select one vertex from the sketch other than the origin. Zaznacz jeden wierzchołek ze szkicu inny niż początek. - + Select only vertices from the sketch. The last selected vertex may be the origin. Ze szkicu wybierz tylko wierzchołki. Ostatni wybrany wierzchołek może być punktem początkowym. - + Wrong solver status Nieprawidłowy status solvera - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Nie można dodać wiązania bloku, jeśli rysunek nie został rozwiązany lub istnieją wiązania zbędne i/lub sprzeczne. - + Select one edge from the sketch. Zaznacz jedną krawędź ze szkicu. - + Select only edges from the sketch. Zaznacz tylko krawędzie ze szkicu. - - - - - - - + + + + + + + Error Błąd - + Select two or more points from the sketch. Zaznacz dwa lub więcej punktów ze szkicu. - - + + Select two or more vertexes from the sketch. Wybierz dwa lub więcej wierzchołków ze szkicu. - - + + Constraint Substitution Zastąpienie Wiązania - + Endpoint to endpoint tangency was applied instead. Zamiast tego zastosowano styczność od punktu końcowego do punktu końcowego. - + Select vertexes from the sketch. Wybierz wierzchołki ze szkicu. - - + + Select exactly one line or one point and one line or two points from the sketch. Wybierz dokładnie jedną linię lub jeden punkt i jedną linię lub dwa punkty ze szkicu. - + Cannot add a length constraint on an axis! Nie można dodać ograniczenia długości osi! - + This constraint does not make sense for non-linear curves To ograniczenie nie ma sensu dla nieliniowych krzywych - - - - - - + + + + + + Select the right things from the sketch. Wybierz prawidłowe rzeczy ze szkicu. - - + + Point on B-spline edge currently unsupported. Punkt na krawędzi B-spline obecnie nie jest obsługiwany. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Żaden z wybranych punktów nie został związany na odpowiednich krzywych, albo są one częścią tego samego elementu albo obie są zewnętrzną geometrią. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Zaznacz jeden punkt do wielu krzywych lub jedną krzywą do kilku punktów. Zaznaczyłeś %1 krzywych i %2 punktów. - - - - + + + + Select exactly one line or up to two points from the sketch. Wybierz dokładnie jedną linię lub do dwa punkty ze szkicu. - + Cannot add a horizontal length constraint on an axis! Nie można dodać ograniczenia długości osi w poziomie! - + Cannot add a fixed x-coordinate constraint on the origin point! Nie można dodać stałego wiązania współrzędnej x w punkcie bazowym! - - + + This constraint only makes sense on a line segment or a pair of points To wiązanie ma sens tylko na segmencie linii lub parze punktów - + Cannot add a vertical length constraint on an axis! Nie można dodać ograniczenia długości osi w pionie! - + Cannot add a fixed y-coordinate constraint on the origin point! Nie można dodać stałego wiązania współrzędnej y w punkcie bazowym! - + Select two or more lines from the sketch. Wybierz dwie lub więcej linii ze szkicu. - - + + Select at least two lines from the sketch. Wybierz co najmniej dwie linie ze szkicu. - + Select a valid line Wybierz prawidłową linię - - + + The selected edge is not a valid line Wybrana krawędź nie jest prawidłową linią - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywej; dwa punkty końcowe; dwie krzywe i punkt. - + Select some geometry from the sketch. perpendicular constraint Wybierz dowolną geometrię ze szkicu. - + Wrong number of selected objects! perpendicular constraint Niewłaściwa liczba wybranych obiektów! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Z trzech (3) obiektów, dwa (2) muszą być krzywymi i jeden (1) musi być punktem. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nie można dodać wiązania prostopadłości w niepołączonym punkcie! - - - + + + Perpendicular to B-spline edge currently unsupported. Prostopadła do krawędzi B-spline obecnie nie jest obsługiwana. - - + + One of the selected edges should be a line. Jedna z zaznaczonych krawędzi powinna być linią. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcowe; dwie krzywe i punkt. - + Select some geometry from the sketch. tangent constraint Wybierz dowolną geometrię ze szkicu. - + Wrong number of selected objects! tangent constraint Niewłaściwa liczba wybranych obiektów! - - - + + + Cannot add a tangency constraint at an unconnected point! Nie można dodać wiązanie styczności w niepołączonym punkcie! - - - + + + Tangency to B-spline edge currently unsupported. Styczna do krawędzi B-spline nie jest obecnie obsługiwana. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Zastosowano styczność punktu końcowego do punktu końcowego. Wiązanie zgodne zostało usunięte. - - - - + + + + Select one or more arcs or circles from the sketch. Wybierz jeden lub więcej łuków lub okręgów ze szkicu. - - + + Constrain equal Wiązanie równości - + Do you want to share the same radius for all selected elements? Czy chcesz zastosować ten sam promień dla wszystkich zaznaczonych elementów? - - + + Constraint only applies to arcs or circles. Ograniczenie dotyczy tylko łuków lub okręgów. - + Do you want to share the same diameter for all selected elements? Czy chcesz zastosować ten sam promień dla wszystkich zaznaczonych elementów? - - + + Select one or two lines from the sketch. Or select two edges and a point. Zaznacz jedną lub dwie linie ze szkicu. Albo zaznacz dwie krawędzie oraz punkt. - - + + Parallel lines Linie równoległe - - + + An angle constraint cannot be set for two parallel lines. Wiązania kąta nie można ustawić dla dwóch równoległych linii. - + Cannot add an angle constraint on an axis! Nie można dodać ustalonego wiązania kąta na osi! - + Select two edges from the sketch. Zaznacz dwie krawędzie ze szkicu. - - + + Select two or more compatible edges Zaznacz dwa lub więcej zgodnych brzegów - + Sketch axes cannot be used in equality constraints Szkic osi nie możne być użyty w warunku równości - + Equality for B-spline edge currently unsupported. Jednolitość dla krawędzi B-spline nie jest obecnie obsługiwana. - - + + Select two or more edges of similar type Zaznacz dwi lub więcej krawędzi podobnego typu - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Wybierz dwa punkty i linię symetrii, dwa punkty i punkt symetrii lub linię i punkt symetrii ze szkicu. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Nie można dodać wiązania symetrii między linią i jego punktami końcowymi! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Wybierz dwa punkty końcowe linii do działania jako promienie i krawędź reprezentującą obwiednię. Pierwszy wybrany punkt odpowiada indeksowi n1, drugi - indeksowi n2, a wartość odniesienia określa stosunek n2/n1. - + Selected objects are not just geometry from one sketch. Wybrane obiekty są nie tylko geometrią z jednego szkicu. - + Number of selected objects is not 3 (is %1). Liczba wybranych obiektów nie jest 3 (jest %1). - + Cannot create constraint with external geometry only!! Nie można tylko stworzyć wiązania tylko z zewnętrznych geometrii!! - + Incompatible geometry is selected! Wybrana jest niegodna geometria! - + SnellsLaw on B-spline edge currently unsupported. Prawo Snell'a na krawędzi B-spline nie jest obecnie obsługiwane. - - + + Select at least one ellipse and one edge from the sketch. Wybierz co najmniej jedną elipsę i jedną krawędź ze szkicu. - + Sketch axes cannot be used in internal alignment constraint Szkic osi nie może używać w wewnętrznego wyrównania wiązania - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Nie można wewnętrznie związać elipse na innej elipsie. Wybierz tylko jedną elipsę. - - + + Maximum 2 points are supported. Obsługiwane są maksymalnie 2 punkty. - - + + Maximum 2 lines are supported. Maksymalnie 2 linie są obsługiwane. - - + + Nothing to constrain Nie ma nic do związania - + Currently all internal geometry of the ellipse is already exposed. Obecnie cała geometria wewnętrzna elipsy jest już wyznaczona. - - - - + + + + Extra elements Dodatkowe elementy - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Zapewniono więcej elementów niż to możliwe dla danej elipsy. Zostały one pominięte. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Nie można wewnętrznie wiązać łuku elipsy na innym łuku elipsy. Wybierz tylko jeden łuk elipsy. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Nie można wewnętrznie wiązać elipsy na łuku elipsy. Wybierz tylko jedną elipsę lub łuk elipsy. - + Currently all internal geometry of the arc of ellipse is already exposed. Obecnie cała geometria wewnętrzna łuku elipsy jest już wyznaczona. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Zostało pokazane więcej elementów niż jest to możliwe na danym łuku elipsy dostarczone. Te były pominięte. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Aktualnie geometria wewnętrzna jest obsługiwana tylko dla elipsy i łuku elipsy. Ostatni wybrany element musi być elipsą lub łukiem elipsy. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Wybiera wiązanie(a) ze szkicu. - + CAD Kernel Error Błąd Trzonu CAD @@ -2941,42 +2941,42 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Kopia węglowa spowodowałaby zależność cykliczną. - + This object is in another document. Ten obiekt znajduje się w innym dokumencie. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Ten obiekt należy do innej części. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Wybrany rysunek nie jest równoległy do tego rysunku. Przytrzymaj Ctrl+Alt, aby umożliwić rysunki nierównoległe. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Osie XY wybranego rysunku nie mają tego samego kierunku jak ten rysunek. Przytrzymaj Ctrl + Alt, aby to zignorować. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Pochodzenie wybranego rysunku jest niezgodne z pochodzeniem tego rysunku. Przytrzymaj Ctrl + Alt, aby to zignorować. @@ -2996,12 +2996,12 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Deactivate - Deactivate + Dezaktywuj Activate - Activate + Aktywuj @@ -3062,8 +3062,8 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Wstaw promień - - + + Radius: Promień: @@ -3074,8 +3074,8 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Wprowadź średnicę - - + + Diameter: Średnica: @@ -3103,24 +3103,24 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Długość: - - + + Change radius Zmień promień - - + + Change diameter Zmień średnicę - + Refractive index ratio Współczynnik załamania światła - + Ratio n2/n1: Stosunek n2/n1: @@ -3136,22 +3136,22 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Powiązanie tego spowoduje zależność cykliczną. - + This object is in another document. Ten obiekt znajduje się w innym dokumencie. - + This object belongs to another body, can't link. Ten obiekt należy do innego ciała, nie można połączyć. - + This object belongs to another part, can't link. Ten obiekt należy do innej części, nie można połączyć. @@ -3176,12 +3176,12 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Constraint name (available for expressions) - Constraint name (available for expressions) + Nazwa wiązania (dostępna dla wyrażeń) Reference (or constraint) dimension - Reference (or constraint) dimension + Wymiar odniesienia (lub wiązania) @@ -3192,8 +3192,8 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow SketcherGui::PropertyConstraintListItem - - + + Unnamed Nienazwany @@ -3237,7 +3237,7 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow XY-Plane - Płaszczyzna X-Y + Płaszczyzna XY @@ -3309,9 +3309,7 @@ with respect to the others using construction lines If selected, it substitutes dimensional constraints by geometric constraints in the copies, so that a change in the original element is directly reflected on copies - If selected, it substitutes dimensional constraints by geometric constraints -in the copies, so that a change in the original element is directly -reflected on copies + Jeśli zaznaczone, zamienia w kopiach wiązania wymiarowe na geometryczne, tak aby zmiany w elemencie oryginalnym były odzwierciedlone w kopiach @@ -3377,14 +3375,14 @@ reflected on copies Sketcher solver - Sketcher solver + Solver Szkicownika Sketcher dialog will have additional section 'Advanced solver control' to adjust solver settings - Sketcher dialog will have additional section -'Advanced solver control' to adjust solver settings + Okno dialogowe Szkicownik będzie miało dodatkową sekcję +'Zaawansowana kontrola solvera' z ustawieniami solvera @@ -3416,7 +3414,7 @@ Requires to re-enter edit mode to take effect. Auto remove redundants - Auto remove redundants + Usuń nadmiarowe automatycznie @@ -3514,27 +3512,27 @@ Requires to re-enter edit mode to take effect. Color of edges - Color of edges + Kolor krawędzi Color of vertices - Color of vertices + Kolor wierzchołków Color used while new sketch elements are created - Color used while new sketch elements are created + Kolor używany podczas tworzenia nowych elementów szkicu Color of edges being edited - Color of edges being edited + Kolor edytowanych krawędzi Color of vertices being edited - Color of vertices being edited + Kolor edytowanych wierzchołków @@ -3618,7 +3616,7 @@ Requires to re-enter edit mode to take effect. Coordinate text color - Coordinate text color + Kolor tekstu współrzędnej @@ -3912,6 +3910,26 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. All constraints that deal with external geometry were deleted. Usunięto wszystkie wiązania związane z geometrią zewnętrzną. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -3958,7 +3976,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Hide internal alignment - Hide internal alignment + Ukryj wewnętrzne wyrównanie @@ -3968,12 +3986,12 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Extended information - Extended information + Informacje rozszerzone Constraints - Ograniczenia + Wiązania @@ -3992,7 +4010,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Type: - Typ: + Rodzaj: @@ -4012,12 +4030,12 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Center Point - Punkt Centralny + Punkt środkowy Mode: - Mode: + Tryb: @@ -4032,7 +4050,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. External - External + Zewnętrzne @@ -4042,7 +4060,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Extended naming - Extended naming + Nazewnictwo rozszerzone @@ -4092,7 +4110,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Construction - Konstrukcja + Konstrukcyjny @@ -4169,7 +4187,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. A grid will be shown - A grid will be shown + Wyświetlona zostanie siatka @@ -4258,70 +4276,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sprawdzenie poprawności szkicu - + Invalid constraints Wadliwe wiązania - - + + + Fix Napraw - - + + + Find Znajdź - + Delete constraints to external geom. Usuń wiązania do zewnętrznej geom. - + Missing coincidences Brakujące wiązania - + Tolerance: Tolerancja: - + Highlight open vertexes Podświetl otwarte wierzchołki - + Ignore construction geometry Ignoruj geometrię konstrukcji + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Odwrócona geometria zewnętrzna - + Swap endpoints in constraints Zamień punkty końcowe w wiązaniach - + Constraint orientation locking Zamykanie orientacji wiązania - + Enable/Update Włącz/Zaktualizuj - + Disable Wyłącz @@ -4329,104 +4354,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edycja szkicu - + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - + Do you want to close this dialog? Czy chcesz zamknąć to okno dialogowe? - + Invalid sketch Nieprawidłowy szkic - + Do you want to open the sketch validation tool? Czy chcesz otworzyć narzędzie sprawdzania szkicu? - + The sketch is invalid and cannot be edited. Szkic jest nieprawidłowy i nie może być edytowany. - + Please remove the following constraint: Usuń następujące wiązania: - + Please remove at least one of the following constraints: Usuń co najmniej jedno z następujących wiązań: - + Please remove the following redundant constraint: Usuń następujący zbędny wiąz: - + Please remove the following redundant constraints: Usuń następujące zbędne wiązania: - + Empty sketch Pusty szkic - + Over-constrained sketch Szkic ze zbyt dużą liczbą wiązań - - - + + + (click to select) (kliknij, aby wybrać) - + Sketch contains conflicting constraints Szkic zawiera wiązania powodujące konflikt - + Sketch contains redundant constraints Szkic zawiera zbędne wiązania - + Fully constrained sketch - Całkowicie zdefiniowany szkic + W pełni związany szkic - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom + Niewiązany szkic z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stopniem</span></a> swobody - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom + Niezwiązany szkic z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stopniem</span></a> swobody - + Solved in %1 sec Rozwiązano w %1 sek - + Unsolved (%1 sec) Nie rozwiązano (%1 sek) @@ -4515,8 +4540,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Ustal średnicę okręgu lub łuku @@ -4524,8 +4549,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Ustalenie promienia okręgu lub łuku @@ -4542,8 +4567,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Utwórz łuk z punktów końcowych i punkt na łuku @@ -4551,8 +4576,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Tworzy koło w oparciu o 3 punkty na obręczy @@ -4560,8 +4585,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Utwórz łuk ze środka i punktów końcowych @@ -4569,8 +4594,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Utwórz łuk elipsy, wskazując jego środek, półoś wielką, punkty końcowe @@ -4578,8 +4603,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Utwórz łuk hiperboli, wskazując jego środek, wierzchołek, punkty końcowe @@ -4587,8 +4612,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Utwórz łuk paraboli, wskazując jej ognisko, wierzchołek, punkty końcowe @@ -4596,13 +4621,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline przez punkty kontrolne - - + + Create a B-spline by control points Utwórz B-spline przez punkty kontrolne @@ -4610,8 +4635,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Tworzy koło za pomocą jego środka i punku na obręczy @@ -4619,8 +4644,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Utwórz elipsę przez periapsis, apoapsis i mniejszy promień @@ -4628,8 +4653,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Utwórz elipsę przez środek, główny promień i punkt @@ -4637,8 +4662,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Stwórz siedmiokąt przez jego środek i przez jeden narożnik @@ -4646,8 +4671,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Utwórz sześciokąt, punkt środkowy i jeden narożnik @@ -4655,14 +4680,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Utwórz ośmiokąt, punkt środkowy i jeden narożnik - - + + Create a regular polygon by its center and by one corner Utwórz regularny wielokąt przez jego środek i przez jeden narożnik @@ -4670,8 +4695,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Utwórz pięciokąt, punkt środkowy i jeden narożnik @@ -4679,8 +4704,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Utwórz kwadrat, punkt środkowy i jeden narożnik @@ -4688,8 +4713,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Utwórz trójkąt równoboczny przez jego środek i przez jeden narożnik @@ -4697,13 +4722,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Okresowy B-spline przez punkty kontrolne - - + + Create a periodic B-spline by control points Utwórz okresowy B-spline przez punkty kontrolne @@ -4718,7 +4743,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< The document doesn't have a sketch - Dokument nie ma szkicu + Dokument nie zawiera szkicu @@ -4834,7 +4859,7 @@ Do you want to detach it from the support? Auto remove redundants - Auto remove redundants + Usuń nadmiarowe automatycznie @@ -4844,7 +4869,7 @@ Do you want to detach it from the support? Auto update - Auto update + Aktualizacja automatyczna diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm index 2895927913..1fccc77324 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index c6462b51c1..fa1d479c82 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Esboço - + CarbonCopy Cópia de carbono - + Copies the geometry of another sketch Copia a geometria de outro esboço @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Esboço - + Constrain arc or circle Restringir arco ou círculo - + Constrain an arc or a circle Restringir um arco ou um círculo - + Constrain radius Restrição de raio - + Constrain diameter Restringir o diâmetro @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Esboço - + Create arc Criar arco - + Create an arc in the sketcher Criar um arco na bancada de esboços - + Center and end points Pontos de centro e extremidades - + End points and rim point Pontos de extremidade e ponto de borda @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Esboço - + Create a B-spline Criar uma B-spline - + Create a B-spline in the sketch Criar uma B-spline no esboço @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Esboço - + Create circle Criar círculo - + Create a circle in the sketcher Criar um círculo no esboço - + Center and rim point Ponto de centro e borda - + 3 rim points 3 pontos de borda @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Esboço - + Create a conic Criar uma cônica - + Create a conic in the sketch Criar uma cônica no esboço - + Ellipse by center, major radius, point Elipse pelo centro, raio maior, ponto - + Ellipse by Periapsis, apoapsis, minor radius Elipse pelo periélio, apoapsis, menor raio - + Arc of ellipse by center, major radius, endpoints Arco de elipse pelo centro, raio principal, pontos de extremidade - + Arc of hyperbola by center, major radius, endpoints Arco de hipérbole pelo centro, raio maior, pontos de extremidade - + Arc of parabola by focus, vertex, endpoints Arco da parábola por foco, vértice, pontos de extremidade @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Esboço - + Create regular polygon Criar polígono regular - + Create a regular polygon in the sketcher Criar um polígono regular no esboço - + Triangle Triângulo - + Square Quadrado - + Pentagon Pentágono - + Hexagon Hexágono - + Heptagon Heptágono - + Octagon Octógono - + Regular Polygon Polígono regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Esboço - + Constrain angle Ângulo de restrição - + Fix the angle of a line or the angle between two lines Fixar o ângulo de uma linha ou o ângulo entre duas linhas @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Esboço - + Constrain Block Restrição de blocagem - + Create a Block constraint on the selected item Cria uma restrição de blocagem no ítem selecionado @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Esboço - + Constrain coincident Restrição de coincidência - + Create a coincident constraint on the selected item Criar uma restrição de coincidência sobre o item selecionado @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Esboço - + Constrain diameter Restringir o diâmetro - + Fix the diameter of a circle or an arc Corrigir o diâmetro de um círculo ou arco @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Esboço - + Constrain distance Restrição de distância - + Fix a length of a line or the distance between a line and a vertex Trancar o comprimento de uma linha ou a distância entre uma linha e um vértice @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Esboço - + Constrain horizontal distance Restrição de distância horizontal - + Fix the horizontal distance between two points or line ends Fixar a distância horizontal entre dois pontos ou extremidades de linha @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Esboço - + Constrain vertical distance Restringir a distância vertical - + Fix the vertical distance between two points or line ends Fixar a distância vertical entre dois pontos ou extremidades de linha @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Esboço - + Constrain equal Restrição igual - + Create an equality constraint between two lines or between circles and arcs Criar uma restrição de igualdade entre duas linhas ou círculos e arcos @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Esboço - + Constrain horizontally Restringir horizontalmente - + Create a horizontal constraint on the selected item Criar uma restrição horizontal sobre o item selecionado @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Esboço - + Constrain InternalAlignment Restringir alinhamento interno - + Constrains an element to be aligned with the internal geometry of another element Restringe um elemento para ser alinhado com a geometria interna de um outro elemento @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Esboço - + Constrain lock Restrição de bloqueio - + Create a lock constraint on the selected item Criar uma restrição de bloqueio no item selecionado @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Esboço - + Constrain parallel Restrição paralela - + Create a parallel constraint between two lines Criar uma restrição paralela entre duas linhas @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Esboço - + Constrain perpendicular Restrição perpendicular - + Create a perpendicular constraint between two lines Criar uma restrição perpendicular entre duas linhas @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Esboço - + Constrain point onto object Restringir um ponto sobre um objeto - + Fix a point onto an object Fixar um ponto sobre um objeto @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Esboço - + Constrain radius Restrição de raio - + Fix the radius of a circle or an arc Fixar o raio de um círculo ou um arco @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Esboço - + Constrain refraction (Snell's law') Restrição de refração (lei de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Criar uma restrição de refração (lei de Snell) entre dois pontos de extremidade de raios usando uma aresta como interface @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Esboço - + Constrain symmetrical Restrição simétrica - + Create a symmetry constraint between two points with respect to a line or a third point Criar uma restrição de simetria entre dois pontos em relação a uma linha ou um terceiro ponto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Esboço - + Constrain tangent Restrição tangente - + Create a tangent constraint between two entities Criar uma restrição tangente entre duas entidades @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Esboço - + Constrain vertically Restringir verticalmente - + Create a vertical constraint on the selected item Criar uma restrição vertical sobre o item selecionado @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Esboço - + Create arc by three points Criar um arco a partir de três pontos - + Create an arc by its end points and a point along the arc Criar um arco a partir de seus pontos de extremidade e um ponto ao longo do arco @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Esboço - + Create circle by three points Criar um círculo a partir de três pontos - + Create a circle by 3 perimeter points Criar um círculo a partir de 3 pontos do perímetro @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Esboço - + Create arc by center Criar um arco pelo centro - + Create an arc by its center and by its end points Criar um arco a partir do seu centro e por seus pontos de extremidade @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Esboço - + Create an arc of ellipse Criar um arco de elipse - + Create an arc of ellipse in the sketch Criar um arco de elipse no esboço @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Esboço - + Create an arc of hyperbola Cria um arco de hipérbole - + Create an arc of hyperbola in the sketch Cria um arco de hipérbole no esboço @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Esboço - + Create an arc of parabola Criar um arco de parábola - + Create an arc of parabola in the sketch Criar um arco de parábola no Esboço @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Esboço - + Create B-spline Criar B-spline - + Create a B-spline via control points in the sketch. Criar uma B-spline através de pontos de controle no esboço. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Esboço - + Create circle Criar círculo - + Create a circle in the sketch Criar um círculo no esboço @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Esboço - + Create draft line Criar linha de rascunho - + Create a draft line in the sketch Criar uma linha de rascunho no esboço @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Esboço - + Create ellipse by 3 points Criar elipse por 3 pontos - + Create an ellipse by 3 points in the sketch Criar uma elipse por 3 pontos no esboço @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Esboço - + Create ellipse by center Criar elipse pelo centro - + Create an ellipse by center in the sketch Criar uma elipse pelo centro no esboço @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Esboço - + Create fillet Criar filete - + Create a fillet between two lines or at a coincident point Criar um arredondamento entre duas linhas ou em um ponto de coincidência @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Esboço - + Create heptagon Criar heptágono - + Create a heptagon in the sketch Criar um heptágono no esboço @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Esboço - + Create hexagon Criar hexágono - + Create a hexagon in the sketch Criar um hexágono no esboço @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Esboço - + Create line Criar linha - + Create a line in the sketch Criar uma linha no esboço @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Esboço - + Create octagon Criar octógono - + Create an octagon in the sketch Criar um octógono no esboço @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Esboço - + Create pentagon Criar pentágono - + Create a pentagon in the sketch Criar um pentágono no esboço @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Esboço - + Create periodic B-spline Criar B-spline periódica - + Create a periodic B-spline via control points in the sketch. Crie uma B-spline periódica através de pontos de controle no esboço. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Esboço - + Create point Criar ponto - + Create a point in the sketch Criar um ponto no esboço @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Esboço - + Create polyline Criar polígono - + Create a polyline in the sketch. 'M' Key cycles behaviour Criar um polígono no esboço. A tecla 'M' alterna os modos de desenho @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Esboço - + Create rectangle Criar retângulo - + Create a rectangle in the sketch Criar um retângulo no esboço @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Esboço - + Create regular polygon Criar polígono regular - + Create a regular polygon in the sketch Criar um polígono regular no esboço @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Esboço - + Create slot Criar uma fresta - + Create a slot in the sketch Criar uma fresta no esboço @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Esboço - + Create square Criar quadrado - + Create a square in the sketch Criar um quadrado no esboço @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Esboço - + Create text Criar texto - + Create text in the sketch Criar um texto no esboço @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Esboço - + Create equilateral triangle Criar triângulo equilátero - + Create an equilateral triangle in the sketch Criar um triângulo equilátero no esboço @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Esboço - + Extend edge Prolongar aresta - + Extend an edge with respect to the picked position Estende uma aresta em relação à posição escolhida @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Esboço - + External geometry Geometria externa - + Create an edge linked to an external geometry Criar uma aresta ligada a uma geometria externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Esboço - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Esboço - + Toggle reference/driving constraint Alternar restrição de referência/condução - + Toggles the toolbar or selected constraints to/from reference mode Alterna a barra de ferramentas ou restrições selecionadas de/para o modo 'referência' @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Esboço - + Trim edge Recortar aresta - + Trim an edge with respect to the picked position Aparar uma aresta em relação a posição escolhida @@ -1952,47 +1952,47 @@ Erro de restrição automática: esboço insolúvel após a aplicação de restrições de igualdade. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Não é possível adivinhar a intersecção das curvas. Tente adicionar uma restrição coincidente entre os vértices das curvas que você pretende filetar. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versão do OCE / OCC não suporta operação de nó. Você precisa de 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometria BSpline (GeoID) está fora dos limites. - + You are requesting no change in knot multiplicity. Você não solicitou nenhuma mudança de multiplicidade em nós. - + The Geometry Index (GeoId) provided is not a B-spline curve. O índice de geometria (GeoId) fornecida não é uma curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice do nó está fora dos limites. Note que, de acordo com a notação do OCC, o primeiro nó tem índice 1 e não zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade não pode ser aumentada além do grau de B-spline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade não pode ser diminuída abaixo de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. O OCC não consegue diminuir a multiplicidade dentro de tolerância máxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Selecione aresta(s) no esboço. - - - - + + + + Dimensional constraint Restrição de dimensão @@ -2232,273 +2232,273 @@ Um dos selecionados tem que ser no esboço - - + + Select an edge from the sketch. Selecione uma aresta do esboço. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Restrição impossível - - - - + + + + The selected edge is not a line segment A aresta selecionada não é um segmento de linha - - - - - - + + + + + + Double constraint Restrição dupla - - - - + + + + The selected edge already has a horizontal constraint! A aresta selecionada já tem uma restrição horizontal! - - - - + + + + The selected edge already has a vertical constraint! A aresta selecionada já tem uma restrição vertical! - - - - - - + + + + + + The selected edge already has a Block constraint! A aresta selecionada já possui uma restrição de Bloqueio! - + The selected item(s) can't accept a horizontal constraint! Os itens selecionados não podem aceitar uma restrição horizontal! - + There are more than one fixed point selected. Select a maximum of one fixed point! Mais de um ponto fixo selecionado. Selecione um único ponto fixo! - + The selected item(s) can't accept a vertical constraint! Os itens selecionados não podem aceitar uma restrição vertical! - + There are more than one fixed points selected. Select a maximum of one fixed point! Há mais de um ponto fixo selecionado. Selecione no máximo um ponto fixo! - - + + Select vertices from the sketch. Selecione vértices do esboço. - + Select one vertex from the sketch other than the origin. Selecione um vértice do esboço que não seja a origem. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selecione somente os vértices do esboço. O último vértice selecionado pode ser a origem. - + Wrong solver status Erro no status do calculador - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Uma restrição de bloqueio não pode ser adicionada se o esboço não estiver resolvido ou se existirem restrições redundantes e/ou conflitantes. - + Select one edge from the sketch. Selecione uma aresta do esboço. - + Select only edges from the sketch. Selecione somente arestas do esboço. - - - - - - - + + + + + + + Error Erro - + Select two or more points from the sketch. Selecione dois ou mais pontos no esboço. - - + + Select two or more vertexes from the sketch. Selecione dois ou mais vértices do esboço. - - + + Constraint Substitution Substituição de restrição - + Endpoint to endpoint tangency was applied instead. Uma tangência de ponto a ponto de extremidade foi aplicado em vez disso. - + Select vertexes from the sketch. Selecione vértices do esboço. - - + + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou um ponto e uma linha ou dois pontos no esboço. - + Cannot add a length constraint on an axis! Não é possível adicionar uma restrição de comprimento em um eixo! - + This constraint does not make sense for non-linear curves Essa restrição não faz sentido para curvas não-lineares - - - - - - + + + + + + Select the right things from the sketch. Selecione as coisas corretas no esboço. - - + + Point on B-spline edge currently unsupported. Ponto em aresta de Bspline ainda não está suportado. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nenhum dos pontos selecionados foi restringido para as respectivas curvas, eles são partes do mesmo elemento, ou ambos são geometria externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Selecione um ponto e várias curvas, ou uma curva e vários pontos. Você selecionou %1 curvas e %2 pontos. - - - - + + + + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos no esboço. - + Cannot add a horizontal length constraint on an axis! Não é possível adicionar uma restrição de comprimento horizontal em um eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-x fixa no ponto de origem! - - + + This constraint only makes sense on a line segment or a pair of points Esta restrição só faz sentido num segmento reto ou num par de pontos - + Cannot add a vertical length constraint on an axis! Não é possível adicionar uma restrição de comprimento vertical em um eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-y fixa no ponto de origem! - + Select two or more lines from the sketch. Selecione duas ou mais linhas no esboço. - - + + Select at least two lines from the sketch. Selecione pelo menos duas linhas no esboço. - + Select a valid line Selecione uma linha válida - - + + The selected edge is not a valid line A aresta selecionada não é uma linha válida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. perpendicular constraint Selecione alguma geometria do esboço. - + Wrong number of selected objects! perpendicular constraint Número errado de objetos selecionados! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Com 3 objetos, deve haver 2 curvas e 1 ponto. - - + + Cannot add a perpendicularity constraint at an unconnected point! Não é possível adicionar uma restrição de perpendicularidade em um ponto não conectado! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular à aresta de Bspline ainda não está suportado. - - + + One of the selected edges should be a line. Uma das arestas selecionadas deve ser uma linha. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. tangent constraint Selecione alguma geometria do esboço. - + Wrong number of selected objects! tangent constraint Número errado de objetos selecionados! - - - + + + Cannot add a tangency constraint at an unconnected point! Não é possível adicionar uma restrição de tangência em um ponto não conectado! - - - + + + Tangency to B-spline edge currently unsupported. Tangência à aresta de Bspline ainda não está suportado. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uma tangência de ponto a ponto foi aplicada. A restrição de coincidência foi excluída. - - - - + + + + Select one or more arcs or circles from the sketch. Selecione um ou mais arcos ou círculos no esboço. - - + + Constrain equal Restrição igual - + Do you want to share the same radius for all selected elements? Deseja compartilhar o mesmo raio para todos os elementos selecionados? - - + + Constraint only applies to arcs or circles. Restrição aplicável somente em arcos ou círculos. - + Do you want to share the same diameter for all selected elements? Deseja compartilhar o mesmo diâmetro para todos os elementos selecionados? - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecione uma ou duas linhas no esboço. Ou selecione um ponto e duas arestas. - - + + Parallel lines Linhas paralelas - - + + An angle constraint cannot be set for two parallel lines. Uma restrição de ângulo não pode ser aplicada em duas linhas paralelas. - + Cannot add an angle constraint on an axis! Não é possível adicionar uma restrição de ângulo em um eixo! - + Select two edges from the sketch. Selecione duas arestas no esboço. - - + + Select two or more compatible edges Selecione duas ou mais arestas compatíveis - + Sketch axes cannot be used in equality constraints Os eixos do esboço não podem ser usados em restrições de igualdade - + Equality for B-spline edge currently unsupported. Igualdade para aresta de Bspline ainda não está suportada. - - + + Select two or more edges of similar type Selecione duas ou mais arestas do mesmo tipo - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecione dois pontos e uma linha de simetria, dois pontos e um ponto de simetria ou uma linha e um ponto de simetria no esboço. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos finais! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selecione dois pontos finais de linhas para atuar como raios e uma aresta que representa um limite. O primeiro ponto selecionado corresponde ao índice n1, o segundo ao n2, e a distância define a relação n2/n1. - + Selected objects are not just geometry from one sketch. Objetos selecionados não são apenas geometria de um esboço só. - + Number of selected objects is not 3 (is %1). Número de objetos selecionados não é 3 (é %1). - + Cannot create constraint with external geometry only!! Não é possível criar restrição apenas com geometria externa!! - + Incompatible geometry is selected! Geometria incompatível selecionada! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw em aresta de Bspline ainda não está suportada. - - + + Select at least one ellipse and one edge from the sketch. Selecione pelo menos uma elipse e uma aresta do esboço. - + Sketch axes cannot be used in internal alignment constraint Eixos do esboço não podem ser usados para uma restrição de alinhamento interno - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Não é possível restringir internamente uma elipse sobre uma outra elipse. Selecione apenas uma elipse. - - + + Maximum 2 points are supported. Máximo 2 pontos são suportados. - - + + Maximum 2 lines are supported. Máximo 2 linhas são suportadas. - - + + Nothing to constrain Nada para restringir - + Currently all internal geometry of the ellipse is already exposed. Atualmente, toda a geometria interna da elipse já está exposta. - - - - + + + + Extra elements Elementos extra - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Foram fornecidos mais elementos do que o possível para a elipse dada. Estes foram ignorados. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Você não pode restringir internamente um arco de elipse em outro arco de elipse. Selecione apenas um arco de elipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Não é possível restringir internamente uma elipse sobre um arco de elipse. Selecione apenas uma elipse ou um arco de elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Atualmente, toda a geometria interna do arco de elipse já está exposta. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Foram fornecidos mais elementos do que o possível para o arco de elipse dado. Estes foram ignorados. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Atualmente a geometria interna só é suportada para elipses ou arcos de elipse. O último elemento selecionado deve ser uma elipse ou um arco de elipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Selecione restrições do desenho. - + CAD Kernel Error Erro de Kernel CAD @@ -2941,42 +2941,42 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Cópia de carbono poderia causar uma dependência circular. - + This object is in another document. Este objeto está em um outro documento. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Este objeto pertence a outra peça. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. O esboço selecionado não é paralelo a este esboço. Pressione Ctrl+Alt para permitir esboços não paralelos. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Os eixos XY do esboço selecionado não tem a mesma direção que este esboço. Pressione Ctrl + Alt para ignorar isto. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. A origem do esboço selecionado não está alinhada com a origem deste esboço. Pressione Ctrl + Alt para ignorar isto. @@ -2996,12 +2996,12 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Deactivate - Deactivate + Desativar Activate - Activate + Ativar @@ -3062,8 +3062,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Insira o raio - - + + Radius: Raio: @@ -3074,8 +3074,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Inserir diâmetro - - + + Diameter: Diâmetro: @@ -3103,24 +3103,24 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Comprimento: - - + + Change radius Mudar raio - - + + Change diameter Alterar o diâmetro - + Refractive index ratio Relação de índice de refração - + Ratio n2/n1: Relação n2/n1: @@ -3136,22 +3136,22 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Esta ligação irá causar dependência circular. - + This object is in another document. Este objeto está em um outro documento. - + This object belongs to another body, can't link. Este objeto pertence a outro corpo, não é possível vincular. - + This object belongs to another part, can't link. Este objeto pertence a outra parte, não é possível vincular. @@ -3192,8 +3192,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::PropertyConstraintListItem - - + + Unnamed Sem nome @@ -3514,12 +3514,12 @@ Requires to re-enter edit mode to take effect. Color of edges - Color of edges + Cor das bordas Color of vertices - Color of vertices + Cor dos vértices @@ -3912,6 +3912,26 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.All constraints that deal with external geometry were deleted. Todas as restrições conectadas com geometria externa foram eliminadas. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validação de esboço - + Invalid constraints Restrições inválidas - - + + + Fix Consertar - - + + + Find Procurar - + Delete constraints to external geom. Excluir restrições para geometria externa - + Missing coincidences Coincidências faltantes - + Tolerance: Tolerância: - + Highlight open vertexes Destacar os vértices abertos - + Ignore construction geometry Ignorar a geometria de construção + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometria externa invertida - + Swap endpoints in constraints Trocar pontos de extremidade em restrições - + Constraint orientation locking Restrição de bloqueio de orientação - + Enable/Update Ativar/Atualizar - + Disable Desativar @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Editar esboço - + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - + Do you want to close this dialog? Deseja fechar este diálogo? - + Invalid sketch Esboço inválido - + Do you want to open the sketch validation tool? Você quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova as seguintes restrições redundantes: - + Empty sketch Esboço vazio - + Over-constrained sketch Esboço superrestrito - - - + + + (click to select) (clique para selecionar) - + Sketch contains conflicting constraints Esboço contém restrições conflitantes - + Sketch contains redundant constraints Esboço contém restrições redundantes - + Fully constrained sketch Esboço totalmente restrito - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Resolvido em %1 seg - + Unsolved (%1 sec) Não resolvidos (%1 seg) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Corrigir o diâmetro de um círculo ou arco @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixar o raio de um círculo ou um arco @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Criar um arco a partir de seus pontos de extremidade e um ponto ao longo do arco @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Criar um círculo a partir de 3 pontos de borda @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Criar um arco a partir do seu centro e por seus pontos de extremidade @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Criar um arco de elipse pelo seu centro, raio principal, pontos de extremidade @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Criar um arco de hipérbole pelo seu centro, raio principal, pontos de extremidade @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Criar um arco de parábola pelo seu foco, vértice, e pontos de extremidade @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline por pontos de controle - - + + Create a B-spline by control points Criar uma B-spline por pontos de controle @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Criar um círculo a partir do seu centro e por um ponto de borda @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Criar uma elipse por periapsis apoapsis e menor raio @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Criar uma elipse pelo centro, raio maior e ponto @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Criar um heptágono pelo seu centro e por um canto @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Criar um hexágono por seu centro e um canto @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Criar um octógono pelo seu centro e por um canto - - + + Create a regular polygon by its center and by one corner Criar um polígono regular pelo seu centro e por um vértice @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Criar um pentágono pelo seu centro e por um canto @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Criar um quadrado pelo seu centro e por um canto @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Criar um triângulo equilátero, pelo seu centro e por um canto @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periódica por pontos de controle - - + + Create a periodic B-spline by control points Criar uma B-spline periódica por pontos de controle diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm index 5c74190160..ab9117a922 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index 7cdc702705..ce96463498 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Cópia de carbono - + Copies the geometry of another sketch Copia a geometria de outro esboço @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Restringir o arco ou círculo - + Constrain an arc or a circle Restringir um arco ou um círculo - + Constrain radius Restringir o raio - + Constrain diameter Restringir o diâmetro @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Criar Arco - + Create an arc in the sketcher Criar um arco na bancada esboço (Sketcher) - + Center and end points Pontos central e final - + End points and rim point Pontos de extremidade e ponto de borda @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Criar uma B-spline - + Create a B-spline in the sketch Criar uma B-spline no esboço @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Criar Círculo - + Create a circle in the sketcher Criar um círculo na bancada esboço sketcher - + Center and rim point Ponto do centro e borda - + 3 rim points 3 pontos na circunferência @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Criar uma curva cónica - + Create a conic in the sketch Criar uma curva cónica no esboço - + Ellipse by center, major radius, point Elipse pelo centro, raio maior, ponto - + Ellipse by Periapsis, apoapsis, minor radius Elipse pelo periélio, apoapse, raio menor - + Arc of ellipse by center, major radius, endpoints Arco da elipse pelo centro, raio maior, extremidades - + Arc of hyperbola by center, major radius, endpoints Arco de hipérbole pelo centro, raio maior, pontos de extremidade - + Arc of parabola by focus, vertex, endpoints Arco da parábola por foco, vértice, pontos de extremidade @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Criar polígono regular - + Create a regular polygon in the sketcher Criar um polígono regular na bancada esboço (sketcher) - + Triangle Triângulo - + Square Quadrado - + Pentagon Pentágono - + Hexagon Hexágono - + Heptagon Heptágono - + Octagon Octógono - + Regular Polygon Polígono regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Restringir o ângulo - + Fix the angle of a line or the angle between two lines Corrigir o ângulo de uma linha ou o ângulo entre duas linhas @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Restrição de Bloqueio - + Create a Block constraint on the selected item Cria uma restrição de Bloqueio no item selecionado @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Restringir coincidentes - + Create a coincident constraint on the selected item Criar uma restrição de coincidência no item selecionado @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Restringir o diâmetro - + Fix the diameter of a circle or an arc Fixar o diâmetro de um círculo ou arco @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Restringir distância - + Fix a length of a line or the distance between a line and a vertex Corrigir um comprimento de uma linha ou a distância entre uma linha e um vértice @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Corrigir a distância horizontal entre dois pontos ou extremidades de linha @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Corrigir a distância vertical entre dois pontos ou extremidades de linha @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Restringir igualdade - + Create an equality constraint between two lines or between circles and arcs Criar uma restrição de igualdade entre duas linhas ou entre círculos e arcos @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Restringir horizontalmente - + Create a horizontal constraint on the selected item Criar uma restrição horizontal no item selecionado @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Restringir alinhamento interno - + Constrains an element to be aligned with the internal geometry of another element Restringir o alinhamento do elemento com a geometria interna de outro @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Restrição de bloqueio - + Create a lock constraint on the selected item Criar uma restrição de bloqueio sobre o item selecionado @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Restringir paralelo - + Create a parallel constraint between two lines Criar uma restrição paralela entre duas linhas @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Restringir perpendicular - + Create a perpendicular constraint between two lines Criar uma restrição perpendicular entre duas linhas @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Restringir um ponto sobre um objeto - + Fix a point onto an object Fixar um ponto num objeto @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Restringir o raio - + Fix the radius of a circle or an arc Corrigir o raio de um círculo ou arco @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Restrição refracção (lei de Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Crie uma restrição de refração (lei de Snell) entre dois pontos de extremidade de raios usando uma aresta como interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Restringir simetria - + Create a symmetry constraint between two points with respect to a line or a third point Criar uma restrição de simetria entre dois pontos em relação a uma linha ou um terceiro ponto @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Restringir a tangente - + Create a tangent constraint between two entities Criar uma restrição de tangência entre duas entidades @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Restringir verticalmente - + Create a vertical constraint on the selected item Criar uma restrição vertical no item selecionado @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Criar um arco baseado em três pontos - + Create an arc by its end points and a point along the arc Criar um arco a partir dos seus pontos de extremidade e de um ponto ao longo do arco @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Criar um círculo baseado em três pontos - + Create a circle by 3 perimeter points Criar um arco baseado em três pontos do perímetro @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Criar um arco baseado no centro - + Create an arc by its center and by its end points Criar um arco a partir do seu centro e por seus pontos de extremidade @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Criar um arco de elipse - + Create an arc of ellipse in the sketch Criar um arco de elipse no esboço @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Criar um arco de hipérbole - + Create an arc of hyperbola in the sketch Criar um arco de hipérbole no esboço @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Criar um arco de parábola - + Create an arc of parabola in the sketch Criar um arco de parábola no Esboço @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Criar B-spline - + Create a B-spline via control points in the sketch. Criar uma B-spline através de pontos de controle no esboço. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Criar Círculo - + Create a circle in the sketch Criar um círculo no esboço @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Criar linha reta - + Create a draft line in the sketch Criar uma linha no esboço @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Criar elipse com 3 pontos - + Create an ellipse by 3 points in the sketch Criar uma elipse com 3 pontos no esboço @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Criar elipse pelo centro - + Create an ellipse by center in the sketch Criar uma elipse pelo centro no esboço @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Criar Boleado (fillet) - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Criar heptágono - + Create a heptagon in the sketch Criar um heptágono no esboço @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Criar hexágono - + Create a hexagon in the sketch Criar um hexágono no esboço @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Criar Linha - + Create a line in the sketch Criar uma linha no esboço @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Criar octógono - + Create an octagon in the sketch Criar um octógono no esboço @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Criar pentágono - + Create a pentagon in the sketch Criar um pentágono no esboço @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Criar B-spline periódica - + Create a periodic B-spline via control points in the sketch. Crie uma B-spline periódica através de pontos de controle no esboço. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Criar Ponto - + Create a point in the sketch Criar um ponto no esboço @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Criar polilinha - + Create a polyline in the sketch. 'M' Key cycles behaviour Criar uma polilinha no esboço. Tecla 'M' alterna o comportamento @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Criar Retângulo - + Create a rectangle in the sketch Criar um retângulo no esboço @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Criar polígono regular - + Create a regular polygon in the sketch Criar um polígono regular no esboço @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Criar uma ranhura (slot) - + Create a slot in the sketch Criar uma ranhura (slot) no esboço @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Criar quadrado - + Create a square in the sketch Criar um quadrado no esboço @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Criar Texto - + Create text in the sketch Criar Texto no esboço @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Criar triângulo equilátero - + Create an equilateral triangle in the sketch Criar um triângulo equilátero no esboço @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Prolongar aresta - + Extend an edge with respect to the picked position Estende uma aresta em relação à posição escolhida @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometria externa - + Create an edge linked to an external geometry Criar uma aresta ligada a uma geometria externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Alternar entre restrição de referência/mandatória - + Toggles the toolbar or selected constraints to/from reference mode Alterna a barra de ferramentas ou restrições selecionadas de/para o modo 'referência' @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Aparar aresta - + Trim an edge with respect to the picked position Aparar uma aresta em relação à posição escolhida @@ -1952,47 +1952,47 @@ Erro de restrição automática: esboço insolúvel após a aplicação de restrições de igualdade. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Não é possível calcular a interseção das curvas. Tente adicionar uma restrição coincidente entre os vértices das curvas das quais pretende fazer a concordância. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versão do OCE/OCC não suporta operações com nós. É necessária a versão 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometria BSpline (GeoID) está fora dos limites. - + You are requesting no change in knot multiplicity. Você não está a solicitar nenhuma mudança na multiplicidade de nó. - + The Geometry Index (GeoId) provided is not a B-spline curve. O índice de geometria (GeoId) fornecida não é uma curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice do nó está fora dos limites. Note que, de acordo com a notação de OCC, o primeiro nó tem índice 1 e não zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade não pode ser aumentada além do grau de B-spline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade não pode ser diminuída, abaixo de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC é incapaz de diminuir a multiplicidade dentro de tolerância máxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Selecionar aresta(s) a partir do esboço. - - - - + + + + Dimensional constraint Restrição dimensional @@ -2232,273 +2232,273 @@ Um dos selecionados tem que estar no esboço - - + + Select an edge from the sketch. Selecione uma aresta do sketch. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Restrição impossível - - - - + + + + The selected edge is not a line segment A aresta selecionada não é um segmento de linha - - - - - - + + + + + + Double constraint Dupla restrição - - - - + + + + The selected edge already has a horizontal constraint! A aresta selecionada já tem uma restrição horizontal! - - - - + + + + The selected edge already has a vertical constraint! A aresta selecionada já tem uma restrição vertical! - - - - - - + + + + + + The selected edge already has a Block constraint! A aresta selecionada já possui uma restrição de Bloqueio! - + The selected item(s) can't accept a horizontal constraint! Os items selecionados não podem aceitar uma restrição horizontal! - + There are more than one fixed point selected. Select a maximum of one fixed point! Mais de um ponto fixo selecionado. Selecione um único ponto fixo! - + The selected item(s) can't accept a vertical constraint! Os itens selecionados não podem aceitar uma restrição vertical! - + There are more than one fixed points selected. Select a maximum of one fixed point! Há mais de um ponto fixo selecionado. Selecione no máximo um ponto fixo! - - + + Select vertices from the sketch. Selecione vértices do esboço. - + Select one vertex from the sketch other than the origin. Selecione um vértice do esboço que não seja a origem. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selecione somente vértices do esboço. O último vértice selecionado deve ser a origem. - + Wrong solver status Erro no estado do calculador - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Uma restrição de bloqueio não pode ser adicionada se o esboço não estiver resolvido ou se existirem restrições redundantes e/ou conflituantes. - + Select one edge from the sketch. Selecione uma aresta do esboço. - + Select only edges from the sketch. Selecione somente arestas do esboço. - - - - - - - + + + + + + + Error Erro - + Select two or more points from the sketch. Selecione dois ou mais pontos no esboço. - - + + Select two or more vertexes from the sketch. Selecione dois ou mais vértices do esboço (sketch). - - + + Constraint Substitution Substituição de restrição - + Endpoint to endpoint tangency was applied instead. Uma tangência de ponto a ponto de extremidade foi aplicada como alternativa. - + Select vertexes from the sketch. Selecionar vértices a partir do esboço. - - + + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou uma linha e um ponto ou dois pontos do esboço. - + Cannot add a length constraint on an axis! Não é possível adicionar uma restrição de comprimento num eixo! - + This constraint does not make sense for non-linear curves Esta restrição não faz sentido para curvas não-lineares - - - - - - + + + + + + Select the right things from the sketch. Selecione as coisas corretas no esboço. - - + + Point on B-spline edge currently unsupported. Ponto na aresta da Bspline atualmente sem suporte. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nenhum dos pontos selecionados foi restringido para as respectivas curvas, eles são partes do mesmo elemento, ou são ambos geometria externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Selecione um ponto e várias curvas, ou uma curva e vários pontos. Você selecionou curvas %1 e %2 pontos. - - - - + + + + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos do esboço. - + Cannot add a horizontal length constraint on an axis! Não é possível adicionar uma restrição de comprimento horizontal num eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-x fixa no ponto de origem! - - + + This constraint only makes sense on a line segment or a pair of points Esta restrição só faz sentido num segmento de reta ou num par de pontos - + Cannot add a vertical length constraint on an axis! Não é possível adicionar uma restrição de comprimento vertical a um eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-y fixa no ponto de origem! - + Select two or more lines from the sketch. Selecione duas ou mais linhas do esboço. - - + + Select at least two lines from the sketch. Selecione pelo menos duas linhas do esboço. - + Select a valid line Selecione uma linha válida - - + + The selected edge is not a valid line A aresta selecionada não é uma linha válida - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. perpendicular constraint Selecione alguma geometria do esboço (sketch). - + Wrong number of selected objects! perpendicular constraint Número errado de objetos selecionados! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Com 3 objetos, deve haver 2 curvas e 1 ponto. - - + + Cannot add a perpendicularity constraint at an unconnected point! Não é possível adicionar uma restrição de perpendicularidade num ponto não conectado! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular à aresta da Bspline atualmente sem suporte. - - + + One of the selected edges should be a line. Uma das arestas selecionadas deve ser uma linha. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. tangent constraint Selecione alguma geometria do esboço (sketch). - + Wrong number of selected objects! tangent constraint Número errado de objetos selecionados! - - - + + + Cannot add a tangency constraint at an unconnected point! Não é possível adicionar uma restrição de tangência num ponto não conectado! - - - + + + Tangency to B-spline edge currently unsupported. Tangência à aresta da Bspline atualmente sem suporte. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uma tangência de ponto a ponto foi aplicada. A restrição de coincidência foi excluída. - - - - + + + + Select one or more arcs or circles from the sketch. Selecione um ou mais arcos ou círculos no esboço. - - + + Constrain equal Restringir igualdade - + Do you want to share the same radius for all selected elements? Deseja usar o mesmo raio para todos os elementos selecionados? - - + + Constraint only applies to arcs or circles. Restrição só aplicável a arcos ou círculos. - + Do you want to share the same diameter for all selected elements? Quer partilhar o mesmo diâmetro para todos os elementos selecionados? - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecione uma ou duas linhas de desenho (sketch). Ou selecione um ponto e duas arestas. - - + + Parallel lines Linhas paralelas - - + + An angle constraint cannot be set for two parallel lines. Uma restrição de ângulo não pode ser aplicada a duas linhas paralelas. - + Cannot add an angle constraint on an axis! Não é possível adicionar uma restrição de ângulo num eixo! - + Select two edges from the sketch. Selecione duas arestas do esboço. - - + + Select two or more compatible edges Selecione duas ou mais arestas compatíveis - + Sketch axes cannot be used in equality constraints Eixos do sketch não podem ser usados em restrições de igualdade - + Equality for B-spline edge currently unsupported. Igualdade para aresta da Bspline atualmente sem suporte. - - + + Select two or more edges of similar type Selecione duas ou mais arestas de tipo semelhante - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecione dois pontos e uma linha de simetria, dois pontos e um ponto de simetria ou uma linha e um ponto de simetria do esboço. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos extremos! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selecione dois pontos finais de linhas para atuar como raios e uma aresta que represente um limite. O primeiro ponto selecionado corresponde ao índice n1, o segundo ao n2, e a distância define a relação n2/n1. - + Selected objects are not just geometry from one sketch. Objetos selecionados não são geometria de apenas um esboço (sketch). - + Number of selected objects is not 3 (is %1). Número de objetos selecionados não é 3 (é %1). - + Cannot create constraint with external geometry only!! Não é possível criar restrição apenas com geometria externa!! - + Incompatible geometry is selected! Geometria incompatível selecionada! - + SnellsLaw on B-spline edge currently unsupported. Lei de Snell na aresta da Bspline atualmente sem suporte. - - + + Select at least one ellipse and one edge from the sketch. Selecione pelo menos uma elipse e uma aresta do esboço. - + Sketch axes cannot be used in internal alignment constraint Eixos do esboço não podem ser usados para uma restrição de alinhamento interno - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Internamente, não pode restringir uma elipse em outra elipse. Selecione apenas uma elipse. - - + + Maximum 2 points are supported. Máximos 2 pontos são suportados. - - + + Maximum 2 lines are supported. Máximos 2 linhas são suportadas. - - + + Nothing to constrain Nada para restringir - + Currently all internal geometry of the ellipse is already exposed. Atualmente, toda a geometria interna da elipse já está exposta. - - - - + + + + Extra elements Elementos extras - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Foram fornecidos mais elementos do que o possível para a elipse dada. Estes foram ignorados. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Não é possível restringir internamente uma elipse sobre um arco de elipse. Selecione apenas uma elipse ou um arco de elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Atualmente, toda a geometria interna do arco de elipse já está exposta. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Foram fornecidos mais elementos do que o possível para o arco de elipse dado. Estes foram ignorados. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Atualmente a geometria interna só é suportada para elipses ou arcos de elipse. O último elemento selecionado deve ser uma elipse ou um arco de elipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Selecione restrições do esboço. - + CAD Kernel Error Erro de Kernel de CAD @@ -2941,42 +2941,42 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Cópia de carbono poderia causar uma dependência circular. - + This object is in another document. Este objeto está noutro documento. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Este objeto pertence a outra peça. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. O esboço selecionado não é paralelo a este esboço. Pressione Ctrl+Alt para permitir esboços não paralelos. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Os eixos XY do esboço selecionado não tem a mesma direção que este esboço. Pressione Ctrl + Alt para ignorá-lo. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. A origem do esboço selecionado não está alinhada com a origem deste esboço. Pressione Ctrl + Alt para ignorá-lo. @@ -3062,8 +3062,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Inserir raio - - + + Radius: Raio: @@ -3074,8 +3074,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Inserir diâmetro - - + + Diameter: Diâmetro: @@ -3103,24 +3103,24 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Comprimento: - - + + Change radius Alterar raio - - + + Change diameter Alterar diâmetro - + Refractive index ratio Rácio do índice de refração - + Ratio n2/n1: Rácio n2/n1: @@ -3136,22 +3136,22 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Esta referência externa irá causar uma dependência circular. - + This object is in another document. Este objeto está noutro documento. - + This object belongs to another body, can't link. Este objeto pertence a outro corpo, não é possível ligar. - + This object belongs to another part, can't link. Este objeto pertence a outra parte, não é possível liga-los. @@ -3192,8 +3192,8 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois SketcherGui::PropertyConstraintListItem - - + + Unnamed Sem nome @@ -3912,6 +3912,26 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.All constraints that deal with external geometry were deleted. Todas as restrições relacionadas com geometria externa foram eliminadas. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validação de esboço (sketcher) - + Invalid constraints Restrições inválidas - - + + + Fix Corrigir - - + + + Find Encontrar - + Delete constraints to external geom. Eliminar restrições para geometria externa. - + Missing coincidences Coincidências em falta - + Tolerance: Tolerância: - + Highlight open vertexes Realçar os vértices abertos - + Ignore construction geometry Ignorar a geometria de construção + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometria externa invertida - + Swap endpoints in constraints Trocar pontos de extremidade em restrições - + Constraint orientation locking Bloqueio de restrição de orientação - + Enable/Update Ativar/Atualizar - + Disable Desativar @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Editar Esboço - + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - + Do you want to close this dialog? Deseja fechar esta janela? - + Invalid sketch Esboço (sketch) inválido - + Do you want to open the sketch validation tool? Quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova a seguinte restrição redundante: - + Empty sketch Esboço vazio - + Over-constrained sketch Esboço demasiado restrito (constrangido) - - - + + + (click to select) (clique para selecionar) - + Sketch contains conflicting constraints O esboço contém restrições em conflito - + Sketch contains redundant constraints O esboço contém restrições redundantes - + Fully constrained sketch Esboço totalmente restrito - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Resolvido em %1 segundo - + Unsolved (%1 sec) Não resolvido (%1 s) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixar o diâmetro de um círculo ou arco @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Corrigir o raio de um círculo ou arco @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Criar um arco a partir dos seus pontos de extremidade e de um ponto ao longo do arco @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Criar um círculo a partir de 3 pontos @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Criar um arco a partir do seu centro e por seus pontos de extremidade @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Criar um arco de elipse pelo seu centro, raio maior, pontos de extremidade @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Criar um arco de hipérbole pelo seu centro, raio maior, pontos de extremidade @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Criar um arco de parábola pelo seu foco, vértice, pontos de extremidade @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline por pontos de controle - - + + Create a B-spline by control points Criar uma B-spline por pontos de controle @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Cria um círculo pelo seu centro e por um ponto na circunferência @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Criar uma elipse por periapsis apoapsis e menor raio @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Criar uma elipse pelo centro, raio maior e ponto @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Criar um heptágono pelo seu centro e por um vértice @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Criar um hexágono pelo seu centro e um vértice @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Criar um octógono pelo seu centro e por um vértice - - + + Create a regular polygon by its center and by one corner Criar um polígono regular pelo seu centro e por um vértice @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Criar um pentágono pelo seu centro e por um vértice @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Criar um quadrado pelo seu centro e por um vértice @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Criar um triângulo equilátero, pelo seu centro e por um vértice @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periódica por pontos de controle - - + + Create a periodic B-spline by control points Criar uma B-spline periódica por pontos de controle diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm index f324ba5460..237579e74b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 8d914757ca..8ed97d42e2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Copie la indigo - + Copies the geometry of another sketch Copiază geometria altei schițe @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrânge un arc de cerc sau un cerc - + Constrain an arc or a circle Constrânge un arc de cerc sau un cerc - + Constrain radius Rază constrânsă - + Constrain diameter Constrângere diametru @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Creeaza un arc de cerc - + Create an arc in the sketcher Crearea unui arc de cerc în schiţă - + Center and end points Puncte de centru și de sfârșit - + End points and rim point Puncte de sfarșit și punct de margine @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Creaţi un B-spline - + Create a B-spline in the sketch Creaţi o curbă B-spline în schiţă @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Crează cerc - + Create a circle in the sketcher Crează un cerc în desenator - + Center and rim point Creați un cerc definit de centru și un punct pe margine - + 3 rim points Cerc definit prin 3 puncte @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Creează o conică - + Create a conic in the sketch Crează o secțiune conică în schiţă - + Ellipse by center, major radius, point Crează o Elipsă prin definirea centrului, razei majore și a unui punct - + Ellipse by Periapsis, apoapsis, minor radius Crează o elipsă prin definirea punctelor din extremitățile axei mari și a razei minore - + Arc of ellipse by center, major radius, endpoints Arc de elipsă cu centru, rază majoră, puncte de sfârșit - + Arc of hyperbola by center, major radius, endpoints Arc de hiperbolă cu centru, rază majoră, puncte de sfârșit - + Arc of parabola by focus, vertex, endpoints Arc de parabolă cu axă, vârf, puncte de sfârșit @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Creează poligon regulat - + Create a regular polygon in the sketcher Creaţi un poligon regulat în Desenator - + Triangle Triunghi - + Square Pătrat - + Pentagon Pentagon - + Hexagon Hexagon - + Heptagon Heptagon - + Octagon Octogon - + Regular Polygon Poligon regulat @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Unghi constrans - + Fix the angle of a line or the angle between two lines Repară unghiul unei drepte sau unghiul dintre două linii @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrângeri de blocare - + Create a Block constraint on the selected item Creeați o constrângere de tip blocare pe elementul selectat @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Constrângere coincidentă - + Create a coincident constraint on the selected item Crează o constrângere coincidentă pe obiectul selectat @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrângere diametru - + Fix the diameter of a circle or an arc Fixează diametrul unui cerc sau arc de cerc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Distanţă constrânsă - + Fix a length of a line or the distance between a line and a vertex Bate în cuie lungimea unei linii sau distanţa dintre o linie şi un vârf @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Bate în cuie distanţa orizontală dintre doua puncte sau capete de linii @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Bate în cuie distanţa verticală dintre două puncte sau capete de linie @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Egalitate constransă - + Create an equality constraint between two lines or between circles and arcs Crează o egalitate constrânsă între două linii, cercuri sau arce @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Constrângere orizontală - + Create a horizontal constraint on the selected item Crează o constrângere orizontală pentru obiectul selectat @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrânge alinierea internă - + Constrains an element to be aligned with the internal geometry of another element Constrânge un element să fie aliniat cu geometria internă a altui element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Constrângere fixă - + Create a lock constraint on the selected item Crează o constrângere fixă pe obiectul selectat @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Constrângere paralelă - + Create a parallel constraint between two lines Crează o constrângere paralelă între două linii @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Constrângere perpendiculară - + Create a perpendicular constraint between two lines Crează o constrângere perpendiculară între două linii @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Constrânge punct pe obiect - + Fix a point onto an object Fixează un punct de un obiect @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Rază constrânsă - + Fix the radius of a circle or an arc Fixează raza unui cerc sau arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrângere de refracție (Legea lui Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Creați o regulă de refracție (Legea lui Snell) între două puncte de sfârșit a unei raze și o muchie ca interfață. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Constrângere simetrică - + Create a symmetry constraint between two points with respect to a line or a third point Creați o constrângere de simetrie între două puncte fața de o linie @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Constrângere tangentă - + Create a tangent constraint between two entities Crează o constrângere tangentă între două entităţi @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Constrângere verticală - + Create a vertical constraint on the selected item Crează o constrângere verticală pe obiectul selectat @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Creaţi arc de trei puncte - + Create an arc by its end points and a point along the arc Creează un arc de la punctul său final și un punct de-a lungul arcului @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Creați cerc de trei puncte - + Create a circle by 3 perimeter points Creați un cerc cu 3 puncte pe circumferință @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Creați arc cu centrul - + Create an arc by its center and by its end points Creează un arc cu propiul centru și cu propiile puncte finale @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Creaţi un arc de elipsă - + Create an arc of ellipse in the sketch Creaţi un arc de elipsă în schiţă @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Creaţi un arc de hiperbolă - + Create an arc of hyperbola in the sketch Creaţi un arc de hiperbolă în schiţă @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Creaţi un arc de parabolă - + Create an arc of parabola in the sketch Creaţi un arc de parabolă în schiţă @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Creează o Bspline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Crează cerc - + Create a circle in the sketch Crează un cerc în schiţă @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Crează o linie de proiect - + Create a draft line in the sketch Crează o linie de proiect în schiţă @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Creați o elipsă din trei puncte - + Create an ellipse by 3 points in the sketch Creaţi în schiță o elipsă definită prin 3 puncte @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Creați o elipsă cu centru - + Create an ellipse by center in the sketch Creaţi în schiță o elipsa definită prin centru @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Crează panglică - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Creează heptagon - + Create a heptagon in the sketch Creați un heptagon în schiță @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Creează hexagon - + Create a hexagon in the sketch Creaţi un hexagon în schiţă @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Crează linie - + Create a line in the sketch Crează o linie în schiţă @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Creează octogon - + Create an octagon in the sketch Creaţi un octogon în schiţă @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Creează pentagon - + Create a pentagon in the sketch Creați un pentagon în schiță @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Crează funcții B-spline periodice - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Crează punct - + Create a point in the sketch Crează un punct în schiţă @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Crează polilinie - + Create a polyline in the sketch. 'M' Key cycles behaviour Creaţi o polilinie în schiţă. Apăsarea repetată a tastei ”M” permite navigarea între componente @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Crează dreptunghi - + Create a rectangle in the sketch Crează un dreptunghi în schiţă @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Creează poligon regulat - + Create a regular polygon in the sketch Creați un poligon regulat în schiţă @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Crează o canelură - + Create a slot in the sketch Creați o canelură în schiță @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Creează pătrat - + Create a square in the sketch Crea un pătrat în schiţă @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Crează text - + Create text in the sketch Crează text în schiţă @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Creează triunghi echilateral - + Create an equilateral triangle in the sketch Creați un triunghi echilater în schiță @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Prelungirea muchiei - + Extend an edge with respect to the picked position Prelungiți o muchie în raport cu poziția selctată @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometrie externă - + Create an edge linked to an external geometry Crează o muchie legată de o geometrie externă @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Activează/dezactivează constrângerile de referință / constrângerile pilot - + Toggles the toolbar or selected constraints to/from reference mode Activează/dezactivează bara de instrumente sau constrângerile selectate în / din modul de referință @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Taie marginea - + Trim an edge with respect to the picked position Taie o margine relativ la pozitia aleasa @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Nu puteți ghici intersecția curbelor. Încercați să adăugați o constrângere de potrivire între vârfurile curbelor pe care intenționați să le completați. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Această versiune de OCE/OCC nu suportă operarea nodului. Ai nevoie de versiunea 6.9.0 sau mai recentă. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Nu cereți nicio schimbare în multiplicitatea nodului. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indexul nod este în afara limitelor. Reţineţi că în conformitate cu notaţia OCC, primul nod are indexul 1 şi nu zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Multiplicitatea nu poate fi diminuată sub zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC este în imposibilitatea de a reduce multiplicarea în limitele toleranței maxime. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Selectati margini din schita. - - - - + + + + Dimensional constraint Constrângere dimensională @@ -2232,273 +2232,273 @@ Unul din elementele selectate trebuie sa fie in schita - - + + Select an edge from the sketch. Selectati o margine din schita. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Constrangere imposibila - - - - + + + + The selected edge is not a line segment Marginea selectata nu este un segment - - - - - - + + + + + + Double constraint Constrangere dubla - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Obiectele selectate nu accepta o constrangere orizontala! - + There are more than one fixed point selected. Select a maximum of one fixed point! Există mai mult de un punct fix selectat. Selectaţi maxim un punct fix! - + The selected item(s) can't accept a vertical constraint! Obiectele selectate nu accepta o constrangere verticala! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Selectează nodurile din Schiță. - + Select one vertex from the sketch other than the origin. Selectează un nod din schiţa altul decât originea. - + Select only vertices from the sketch. The last selected vertex may be the origin. Selectaţi doar nodurile din schiță. Ultimul punct selectat poate fi originea. - + Wrong solver status Status de greşit ak Rezolvitor - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. O constrângere de blocare nu poate fi adăugată dacă schița este nerezolvate sau există constrângeri redundante şi/sau contradictorii. - + Select one edge from the sketch. Selectaţi o margine din Schiță. - + Select only edges from the sketch. Selectaţi o margine din Schiță. - - - - - - - + + + + + + + Error Eroare - + Select two or more points from the sketch. Selectaţi două sau mai multe puncte din schita. - - + + Select two or more vertexes from the sketch. Selectaţi două sau mai multe noduri din schiță. - - + + Constraint Substitution Substituire de constrângere - + Endpoint to endpoint tangency was applied instead. Punct final la punctul final de tangenţă a fost aplicat în schimb. - + Select vertexes from the sketch. Selectati varfuri din schita. - - + + Select exactly one line or one point and one line or two points from the sketch. Selectati exact o linie sau un punct si o linie sau două puncte din schita. - + Cannot add a length constraint on an axis! Nu se poate adauga o constrangere de lungime pentru o axa! - + This constraint does not make sense for non-linear curves Această restricţie nu are sens pentru curbe non-liniare - - - - - - + + + + + + Select the right things from the sketch. Selectaţi lucruri corecte din schiță. - - + + Point on B-spline edge currently unsupported. Punct pe muchia curbei B-spline care nu este suportat. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nici unul dintre punctele selectate nu trece prin curbele respective, sau pentru că ele fac parte din același element sau pentru că ele sunt amândouă exterioare din punct de vedere geometric. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Selectaţi fie un punct şi mai multe curbe, sau o curba şi mai multe puncte. Aţi selectat %1 curbe şi %2 puncte. - - - - + + + + Select exactly one line or up to two points from the sketch. Selectati exact o linie sau maxim doua puncte din schita. - + Cannot add a horizontal length constraint on an axis! Nu se poate adauga o constrangere de lungime orizontala pentru o axa! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Această constrângere are sens doar pe un segment de linie sau pe o pereche de puncte - + Cannot add a vertical length constraint on an axis! Nu se poate adauga o constrangere verticala pentru o axa! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Selectati doua sau mai multe linii din schita. - - + + Select at least two lines from the sketch. Selectati cel putin doua linii din schita. - + Select a valid line Selectaţi o linie valida - - + + The selected edge is not a valid line Marginea selectată nu este o linie validă - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2507,45 +2507,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Se acceptă combinațiile: două curbe; un punct extrem şi o curbă; două puncte extreme; două curbe şi un punct. - + Select some geometry from the sketch. perpendicular constraint Selectaţi o geometrie din schiță. - + Wrong number of selected objects! perpendicular constraint Număr greșit al obiectelor selectate! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Cu 3 obiecte, trebuie să existe 2 curbe și un punct. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nu pot adauga o constrângere perpendiculară pentru un punct neconectat! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular pe marginea B-spline neacceptată în prezent. - - + + One of the selected edges should be a line. Una dintre marginile selectate trebuie sa fie o linie. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2553,249 +2553,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Există un număr de moduri în care se poate aplica această constrângere. Se accepta combinațiile: două curbe; un punct extrem şi o curbă; două puncte extreme; două curbe şi un punct. - + Select some geometry from the sketch. tangent constraint Selectaţi o geometrie din schiță. - + Wrong number of selected objects! tangent constraint Număr greșit al obiectelor selectate! - - - + + + Cannot add a tangency constraint at an unconnected point! Nu pot adauga constrângere tangenţială pentru un punct neconectat! - - - + + + Tangency to B-spline edge currently unsupported. Tangenţă la marginea B-spline neacceptată în prezent. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Punct final la punctul final de tangenţă a fost aplicat. Coincident restricţia a fost şters. - - - - + + + + Select one or more arcs or circles from the sketch. Selectaţi doar un arc sau un cerc din schiţă. - - + + Constrain equal Egalitate constransă - + Do you want to share the same radius for all selected elements? Vreți să se folosească aceeaşi rază pentru toate elementele selectate? - - + + Constraint only applies to arcs or circles. Restricţia se aplică numai pentru arce de cerc sau cercuri. - + Do you want to share the same diameter for all selected elements? Vreți să se folosească același diametru pentru toate elementele selectate? - - + + Select one or two lines from the sketch. Or select two edges and a point. Selectaţi una sau două linii din schiță, sau selectaţi două margini şi un punct. - - + + Parallel lines Linii paralele - - + + An angle constraint cannot be set for two parallel lines. O constrângere unghiulară nu poate fi aplicată la două linii paralele. - + Cannot add an angle constraint on an axis! Nu pot adăuga o constrângere de unghi pe o axă! - + Select two edges from the sketch. Selectaţi două margini din schiţă. - - + + Select two or more compatible edges Selectaţi două sau mai multe margini compatibile - + Sketch axes cannot be used in equality constraints Axele schiţei nu pot fi folosite în constrângeri de egalitate - + Equality for B-spline edge currently unsupported. Egalitate pentru muchiile curbelor B-spline, în prezent, nu sunt suportate. - - + + Select two or more edges of similar type Selectaţi două sau mai multe margini de acelaşi tip - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selectaţi două puncte şi o linie de simetrie, două puncte şi un punct de simetrie sau o linie si un punct de simetrie din schiță. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Nu se poate adăuga o constrângere de simetrie între o linie şi punctele ei de capăt! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selectaţi două puncte extreme ale segmentelor de linie ca raze, si o margine ca limită. Primul punct selectat corespunde indicelui n1, al doilea - pentru n2 şi valoarea de referință este setată la n2/n1. - + Selected objects are not just geometry from one sketch. Obiectele selectate nu sunt geometria doar unui sketch. - + Number of selected objects is not 3 (is %1). Numărul obiectelor selectate nu este egal cu 3 (este %1). - + Cannot create constraint with external geometry only!! Imposibil de creat constrângeri numai cu forma geometrică exterioară!! - + Incompatible geometry is selected! Geometria selectată este incompatibilă! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw pe marginea curbei B-Spline este neacceptată în prezent. - - + + Select at least one ellipse and one edge from the sketch. Selectaţi cel puţin o elipsă şi o margine din schiță. - + Sketch axes cannot be used in internal alignment constraint Axele schiţei nu pot fi folosite în constrângeri de aliniere internă - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Se acceptă maxim 2 puncte. - - + + Maximum 2 lines are supported. Se acceptă maxim 2 linii. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. În prezent, toate geometria internă a elipsei este deja expusă. - - - - + + + + Extra elements Elemente suplimentare - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Ați furnizat mai multe elemente decât necesare pentru elipsa dată. Ele au fost ignorate. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. În prezent toate geometria internă a arcului de elipsa este deja expusă. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Ați furnizat mai multe elemente decât necesare pentru arcul de elipsa dat. Ele au fost ignorate. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. În prezent, geometria internă este acceptată numai pentru elipsă şi arc de elipsă. Ultimul element selectat trebuie să fie o elipsă sau un arc de elipsă. - - - - - + + + + + @@ -2803,7 +2803,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selectați constrângerile din schiță. - + CAD Kernel Error Eroare a nucleului CAD @@ -2938,42 +2938,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Copia ar provoca o dependență circulară. - + This object is in another document. Acest obiect este într-un alt document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Acest obiect aparține altei piese. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Axele XY ale schiței selectate nu au aceeași direcție și în această schiță. Utilizați tastele Ctrl + Alt pentru a ignora problema. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Originea schiței selectată nu este aliniată la originea acestei schițe. Țineți apăsate tastele Ctrl + Alt pentru a ignora situația. @@ -3059,8 +3059,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Introduceți raza - - + + Radius: Raza: @@ -3071,8 +3071,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Înserează diamtreul - - + + Diameter: Diametru: @@ -3100,24 +3100,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Lungime: - - + + Change radius Schimbați raza - - + + Change diameter Schimbă diamtrul - + Refractive index ratio Procentul indicelui de refracție - + Ratio n2/n1: Raportul n2/n1: @@ -3133,22 +3133,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Această selecție va crea o dependență circulară. - + This object is in another document. Acest obiect este într-un alt document. - + This object belongs to another body, can't link. Acest obiect nu poate fi selectat deoarece aparține altei piese. - + This object belongs to another part, can't link. Acest obiect nu poate fi selectat deoarece aparține altei piese. @@ -3189,8 +3189,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Nedenumit @@ -3907,6 +3907,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Toate constrângerile referitoare la geometria externă au fost șterse. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4253,70 +4273,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validarea schiței - + Invalid constraints Constrângeri nevalide - - + + + Fix Fix - - + + + Find Caută - + Delete constraints to external geom. Elimină constrângerile privind geometria externă. - + Missing coincidences Lipsesc coincidente - + Tolerance: Toleranţă: - + Highlight open vertexes Pune în evidență Nodurile deschise - + Ignore construction geometry Ignoră elementele construcției geometrice + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometrie externă inversă - + Swap endpoints in constraints Inversați constrângerile punctelor extreme - + Constraint orientation locking Constrângeri de zăvorâre a orientării - + Enable/Update Activează/Updatează - + Disable Dezactivare @@ -4324,104 +4351,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Editaţi schiţa - + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? - + Invalid sketch Schiță nevalidă - + Do you want to open the sketch validation tool? Doriți să să deschideți scula de validare a schiței? - + The sketch is invalid and cannot be edited. Schița nu este validă și nu poate fi editată. - + Please remove the following constraint: Înlătură urmatoarea constrângere: - + Please remove at least one of the following constraints: Înlaturaţi cel puţin una din urmatoarele constrângeri: - + Please remove the following redundant constraint: Înlăturaţi urmatoarele constrângeri redundante: - + Please remove the following redundant constraints: Înlăturaţi urmatoarele constrângeri redundante: - + Empty sketch Schita goala - + Over-constrained sketch Schiță Supra-constrânsă - - - + + + (click to select) (apăsați pentru selectare) - + Sketch contains conflicting constraints Schiţa conţine constrângeri contradictorii - + Sketch contains redundant constraints Schiţă conţine constrângeri redundante - + Fully constrained sketch Schita constranse in totalitate - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Rezolvare in %1 secunde - + Unsolved (%1 sec) Nerezolvata (%1 sec) @@ -4510,8 +4537,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixează diametrul unui cerc sau arc de cerc @@ -4519,8 +4546,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixează raza unui cerc sau arc @@ -4537,8 +4564,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Creează un arc de la punctul său final și un punct de-a lungul arcului @@ -4546,8 +4573,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Creeați un cerc definit prin 3 puncte pe circumferință @@ -4555,8 +4582,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Creează un arc cu propiul centru și cu propiile puncte finale @@ -4564,8 +4591,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Creaţi un arc de elipsa, definită prin centru, raza majoră, extremități @@ -4573,8 +4600,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Creaţi un arc de hiperbolă definită prin centru, raza majoră, punctele extreme @@ -4582,8 +4609,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Creaţi un arc de de parabolă definită prin focar, noduri, puncte finale @@ -4591,13 +4618,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline definită prin punctele de control - - + + Create a B-spline by control points Creaţi un B-spline definită prin punctele de control @@ -4605,8 +4632,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Creează un cerc definit prin centrul propriu și cu un punct pe circumferință @@ -4614,8 +4641,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Creează o elipsă definită prin punctele din extremitățile axei mari și raza minoră @@ -4623,8 +4650,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Creează o Elipsă definită prin centru, raza majoră și un punct @@ -4632,8 +4659,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Creați un heptagon definit prin centrul său şi a unui colţ @@ -4641,8 +4668,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Creați un hexagon definit prin centrul său şi un colţ @@ -4650,14 +4677,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Creați un octogon definit prin centrul său şi a un colţ - - + + Create a regular polygon by its center and by one corner Creați unui poligon regulat definit prin centrul său şi un colţ @@ -4665,8 +4692,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Creați unui pentagon definit prin centrul său şi a un colţ @@ -4674,8 +4701,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Creați un pătrat definit prin centrul său şi un colţ @@ -4683,8 +4710,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Creați un unui triunghi echilateral definit prin centrul său şi un colţ @@ -4692,13 +4719,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Creaţi o curbă B-spline periodică prin punctele de control - - + + Create a periodic B-spline by control points Creaţi o curbă B-spline periodică prin punctele de control diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index f52f918e28..a4feeeb749 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index fea9b25a8b..403966e83f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Эскизирование - + CarbonCopy Точная копия - + Copies the geometry of another sketch Копировать геометрию другого эскиза @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Эскизирование - + Constrain arc or circle Ограничить дугу или окружность - + Constrain an arc or a circle Ограничить дугу или окружность - + Constrain radius Ограничение радиуса - + Constrain diameter Ограничить диаметр @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Эскизирование - + Create arc Создать дугу - + Create an arc in the sketcher Создать дугу на эскизе - + Center and end points Центр и конечные точки - + End points and rim point По конечным и касательной @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Эскизирование - + Create a B-spline Создать B-сплайн - + Create a B-spline in the sketch Создать B-сплайн на эскизе @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Эскизирование - + Create circle Создать окружность - + Create a circle in the sketcher - Создать окружность в эскизе + Создать окружность на эскизе - + Center and rim point По центру и касательной - + 3 rim points По трём точкам @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Эскизирование - + Create a conic Создать конику - + Create a conic in the sketch Создать конус на эскизе - + Ellipse by center, major radius, point Эллипс по центру, большому радиусу, точке - + Ellipse by Periapsis, apoapsis, minor radius Эллипс по периапсиде, апоапсиде, малой полуоси - + Arc of ellipse by center, major radius, endpoints Дуга эллипса по центру, большой полуоси, концевым точкам - + Arc of hyperbola by center, major radius, endpoints Создать гиперболу, указав центр, радиус и конечные точки - + Arc of parabola by focus, vertex, endpoints Создать Параболу, указав фокус, вершины, и конечные точки @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Эскизирование - + Create regular polygon Создать правильный многоугольник - + Create a regular polygon in the sketcher Создать правильный многоугольник на эскизе - + Triangle Треугольник - + Square Квадрат - + Pentagon Пятиугольник - + Hexagon Шестиугольник - + Heptagon Семиугольник - + Octagon Восьмиугольник - + Regular Polygon Правильный многоугольник @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Эскизирование - + Constrain angle Ограничить угол - + Fix the angle of a line or the angle between two lines Фиксировать угол отрезка или угол между двумя отрезками @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Эскизирование - + Constrain Block Ограничения (Привязки) - + Create a Block constraint on the selected item Создать группу ограничений для выбранного объекта @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Эскизирование - + Constrain coincident Ограничить совпадение - + Create a coincident constraint on the selected item Создать ограничение совпадения для выбранных элементов @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Эскизирование - + Constrain diameter Ограничить диаметр - + Fix the diameter of a circle or an arc Задать диаметр окружности или дуги @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Эскизирование - + Constrain distance Ограничить расстояние - + Fix a length of a line or the distance between a line and a vertex Зафиксировать длину линии, расстояние между точками, или расстояние между линией и точкой @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Эскизирование - + Constrain horizontal distance Ограничение расстояния по горизонтали - + Fix the horizontal distance between two points or line ends Фиксировать расстояние по горизонтали между двумя точками или концами отрезка @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Эскизирование - + Constrain vertical distance Ограничение расстояния по вертикали - + Fix the vertical distance between two points or line ends Фиксировать расстояние по вертикали между двумя точками или концами отрезка @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Эскизирование - + Constrain equal Ограничение равности - + Create an equality constraint between two lines or between circles and arcs Создать ограничение равенства между двумя отрезками или между окружностями и дугами @@ -570,35 +570,35 @@ CmdSketcherConstrainHorizontal - + Sketcher Эскизирование - + Constrain horizontally Ограничить горизонтально - + Create a horizontal constraint on the selected item - Создать ограничение горизонтальности для выбранного элемента + Создать ограничение горизонтальности для выбранных линий CmdSketcherConstrainInternalAlignment - + Sketcher Эскизирование - + Constrain InternalAlignment Привязать к внутренней геометрии - + Constrains an element to be aligned with the internal geometry of another element Привязать элемент к внутренней геометрии другого элемента @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Эскизирование - + Constrain lock Ограничение положения - + Create a lock constraint on the selected item Зафиксировать координаты выбранной точки @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Эскизирование - + Constrain parallel Ограничение параллельности - + Create a parallel constraint between two lines Создать ограничение параллельности между двумя линиями @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Эскизирование - + Constrain perpendicular Ограничить перпендикулярность - + Create a perpendicular constraint between two lines Создать ограничение перпендикулярности между двумя линиями @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Эскизирование - + Constrain point onto object Зафиксировать точку на объекте - + Fix a point onto an object Привязать точку к объекту @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Эскизирование - + Constrain radius Ограничение радиуса - + Fix the radius of a circle or an arc Зафиксировать радиус окружности или дуги @@ -696,35 +696,35 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Эскизирование - + Constrain refraction (Snell's law') Ограничение преломления (закон Снеллиуса) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - Создать ограничение по закону преломления (две конечные точки лучей и кривая в качестве границы раздела). + Создать ограничение по закону преломления (закон Снелла) между двумя конечными точками лучей и ребром в качестве интерфейса. CmdSketcherConstrainSymmetric - + Sketcher Эскизирование - + Constrain symmetrical Ограничение симметричности - + Create a symmetry constraint between two points with respect to a line or a third point Создать ограничение симметричности для двух точек относительно линии или третьей точки @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Эскизирование - + Constrain tangent Ограничение касательности - + Create a tangent constraint between two entities Создать ограничение касательности между двумя объектами @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Эскизирование - + Constrain vertically Ограничение вертикальности - + Create a vertical constraint on the selected item Создать ограничение вертикальности для выделенных линий @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Эскизирование - + Create arc by three points Создать дугу по трём точкам - + Create an arc by its end points and a point along the arc Создать дугу, указав её конечные точки и точку вдоль дуги @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Эскизирование - + Create circle by three points Создать окружность по трём точкам - + Create a circle by 3 perimeter points Создать окружность по трём точкам периметра @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Эскизирование - + Create arc by center Создать дугу по центру - + Create an arc by its center and by its end points Создать дугу по её центру и её конечным точкам @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Эскизирование - + Create an arc of ellipse Создать дугу эллипса - + Create an arc of ellipse in the sketch Создать дугу эллипса на эскизе @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Эскизирование - + Create an arc of hyperbola Создать дугу гиперболы - + Create an arc of hyperbola in the sketch Создать дугу гиперболы на эскизе @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Эскизирование - + Create an arc of parabola Создать дугу параболы - + Create an arc of parabola in the sketch Создать дугу параболы на эскизе @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Эскизирование - + Create B-spline Создать B-сплайн - + Create a B-spline via control points in the sketch. Создать B-сплайн по контрольным точкам на эскизе. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Эскизирование - + Create circle Создать окружность - + Create a circle in the sketch Создать окружность на эскизе @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Эскизирование - + Create draft line Создать draft линию - + Create a draft line in the sketch Создать draft линию на эскизе @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Эскизирование - + Create ellipse by 3 points Начертить эллипс по трём точкам - + Create an ellipse by 3 points in the sketch Начертить эллипс по трём точкам на эскизе @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Эскизирование - + Create ellipse by center Начертить эллипс по центру - + Create an ellipse by center in the sketch Начертить эллипс по центру на эскизе @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Эскизирование - + Create fillet Создать скругление - + Create a fillet between two lines or at a coincident point Скруглить угол между двумя линиями, или соединить две линии дугой окружности @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Эскизирование - + Create heptagon Создать семиугольник - + Create a heptagon in the sketch Создать семиугольник на эскизе @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Эскизирование - + Create hexagon Создать шестиугольник - + Create a hexagon in the sketch Создать шестиугольник в эскизе @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Эскизирование - + Create line Создать линию - + Create a line in the sketch Создать линию на эскизе @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Эскизирование - + Create octagon Начертить восьмиугольник - + Create an octagon in the sketch Начертить восьмиугольник на эскизе @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Эскизирование - + Create pentagon Начертить пятиугольник - + Create a pentagon in the sketch Начертить пятиугольник на эскизе @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Эскизирование - + Create periodic B-spline Создать периодический B-сплайн - + Create a periodic B-spline via control points in the sketch. Создать периодический B-сплайн по контрольным точкам на эскизе. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Эскизирование - + Create point Создать точку - + Create a point in the sketch Создать точку на эскизе @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Эскизирование - + Create polyline Создать полилинию - + Create a polyline in the sketch. 'M' Key cycles behaviour Создать полилинию на эскизе. 'M' - смена режима @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Эскизирование - + Create rectangle Создать прямоугольник - + Create a rectangle in the sketch Создать прямоугольник на эскизе @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Эскизирование - + Create regular polygon Создать правильный многоугольник - + Create a regular polygon in the sketch Создать правильный многоугольник на эскизе @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Эскизирование - + Create slot Создать паз - + Create a slot in the sketch Создать паз на эскизе @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Эскизирование - + Create square Создать квадрат - + Create a square in the sketch Создать квадрат на эскизе @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Эскизирование - + Create text Создать текст - + Create text in the sketch Создать текст на эскизе @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Эскизирование - + Create equilateral triangle Создать равносторонний треугольник - + Create an equilateral triangle in the sketch Создать равнобедренный треугольник на эскизе @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Эскизирование - + Extend edge Расширить грань - + Extend an edge with respect to the picked position Продлить грань до ближайшего пересечения @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Эскизирование - + External geometry Внешняя геометрия - + Create an edge linked to an external geometry Добавить внешнюю геометрию @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Эскизирование - + Toggle activate/deactivate constraint Вкл/выкл ограничение - + Toggles activate/deactivate state for selected constraints Включение/отключение состояния для выбранных ограничений @@ -1817,37 +1817,37 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Эскизирование - + Toggle reference/driving constraint Ссылочное / управляемое ограничение - + Toggles the toolbar or selected constraints to/from reference mode - Переключает панель инструментов или выбранные ограничения в / из ссылочного режима + Переключить панель инструментов или выбранные ограничения в/из ссылочного режима CmdSketcherTrimming - + Sketcher Эскизирование - + Trim edge Обрезать кривую - + Trim an edge with respect to the picked position - Удалить кусок линии/кривой до ближайшего пересечения + Обрезать часть линии до указанной позиции @@ -1952,47 +1952,47 @@ Ошибка автоограничения: Эскиз нерешаем после добавлении ограничения равенства. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Не удалось рассчитать пересечение кривых. Попробуйте добавить ограничение совпадения между вершинами кривых, которые вы намерены скруглить. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Эта версия OCE / OCC не поддерживает операции с узлами. Требуется версия 6.9.0 или выше. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline идентификатор геометрии (GeoID) находится вне границ. - + You are requesting no change in knot multiplicity. Вы не запрашиваете никаких изменений в множественности узлов. - + The Geometry Index (GeoId) provided is not a B-spline curve. Идентификатор геометрии (GeoId) не является B-сплайн кривой. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Индекс узла выходит за границы. Обратите внимание, что в соответствии с нотацией OCC первый узел имеет индекс 1, а не ноль. - + The multiplicity cannot be increased beyond the degree of the B-spline. Кратность не может быть увеличена сверх степени B-сплайна. - + The multiplicity cannot be decreased beyond zero. Кратность не может быть уменьшена ниже нуля. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC неспособен уменьшить кратность в пределах максимального допуска. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Выберите элементы из эскиза. - - - - + + + + Dimensional constraint Размерное ограничение @@ -2232,273 +2232,273 @@ Один из выбранных должен находиться на эскизе - - + + Select an edge from the sketch. Выбирите ребро в эскизе. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Ограничение невозможно - - - - + + + + The selected edge is not a line segment Выбранный элемент не является линией - - - - - - + + + + + + Double constraint Избыточное ограничение - - - - + + + + The selected edge already has a horizontal constraint! Выбранная линия уже имеет ограничение горизонтальности! - - - - + + + + The selected edge already has a vertical constraint! Выбранная линия уже имеет ограничение вертикальности! - - - - - - + + + + + + The selected edge already has a Block constraint! Выбранная линия уже имеет Блочное ограничение! - + The selected item(s) can't accept a horizontal constraint! На выбранные элемент(ы) нельзя наложить ограничение горизонтальности! - + There are more than one fixed point selected. Select a maximum of one fixed point! Выбрано несколько фиксированных точек. Выберите максимум одну фиксированную точку! - + The selected item(s) can't accept a vertical constraint! На выбранные элемент(ы) нельзя наложить ограничение вертикальности! - + There are more than one fixed points selected. Select a maximum of one fixed point! Выбрано несколько фиксированных точек. Выберите максимум одну фиксированную точку! - - + + Select vertices from the sketch. Выберите вершины из эскиза. - + Select one vertex from the sketch other than the origin. Выберите одну вершину из эскиза, кроме начальной. - + Select only vertices from the sketch. The last selected vertex may be the origin. Выберите только вершины из эскиза. Последняя выбранная вершина может быть начальной. - + Wrong solver status Неправильный статус решателя - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Блочное ограничение не может быть добавлено, если эскиз не решен или существуют избыточные и/или конфликтующие ограничения. - + Select one edge from the sketch. Выберите одну линию из эскиза. - + Select only edges from the sketch. Выберите линии из эскиза. - - - - - - - + + + + + + + Error Ошибки - + Select two or more points from the sketch. Выберите две или более точек на эскизе. - - + + Select two or more vertexes from the sketch. Выделите две или более точек на эскизе. - - + + Constraint Substitution Замена ограничения - + Endpoint to endpoint tangency was applied instead. Вместо конечной точки применена касательная. - + Select vertexes from the sketch. Выберите точки на эскизе. - - + + Select exactly one line or one point and one line or two points from the sketch. Выделите либо один отрезок, либо точку и отрезок, либо две точки. - + Cannot add a length constraint on an axis! Нельзя наложить ограничение длины на ось! - + This constraint does not make sense for non-linear curves Это ограничение не имеет смысла для нелинейных кривых - - - - - - + + + + + + Select the right things from the sketch. Выберите нужные объекты из эскиза. - - + + Point on B-spline edge currently unsupported. Точка на краю B-сплайна в настоящее время не поддерживается. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ни одна из выбранных точек не была ограничена соответствующими кривыми либо потому, что они являются частями одного и того же элемента, либо потому, что они являются внешней геометрией. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Выберите одну точку и несколько кривых или одну кривую и несколько точек. Вы выбрали %1 кривых и %2 точек. - - - - + + + + Select exactly one line or up to two points from the sketch. Выберите один отрезок или две точки эскиза. - + Cannot add a horizontal length constraint on an axis! Нельзя наложить ограничение длины на ось! - + Cannot add a fixed x-coordinate constraint on the origin point! Ограничить X-координату точки начала координат невозможно! - - + + This constraint only makes sense on a line segment or a pair of points Это ограничение имеет смысл только для сегмента линии или пары точек - + Cannot add a vertical length constraint on an axis! Нельзя наложить ограничение длины на ось! - + Cannot add a fixed y-coordinate constraint on the origin point! Ограничить Y-координату точки начала координат невозможно! - + Select two or more lines from the sketch. Выберите два или более отрезков эскиза. - - + + Select at least two lines from the sketch. Нужно выделить как минимум две линии. - + Select a valid line Среди выделенных элементов должны быть только линии. - - + + The selected edge is not a valid line Выделенное ребро не корректная линия - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Допустимы следующие комбинации: две кривые; концевая точка и кривая; две концевых точки; две кривых и точка. - + Select some geometry from the sketch. perpendicular constraint Выделите геометрические элементы на эскизе. - + Wrong number of selected objects! perpendicular constraint Неправильное количество выбранных объектов! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint С 3 объектами должно быть 2 кривых и 1 точка. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не удаётся наложить ограничение перпендикулярности на точку, так как выделенная точка не является концом кривой. - - - + + + Perpendicular to B-spline edge currently unsupported. Перпендикуляр к кромке B-сплайна в настоящее время не поддерживается. - - + + One of the selected edges should be a line. Один из выбранных элементов должен быть линией. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2554,249 +2554,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Существует несколько способов применения этого ограничения. Допустимые комбинации: две кривые; конечная точка и кривая; две конечные точки; две кривые и точка. - + Select some geometry from the sketch. tangent constraint Выделите геометрические элементы на эскизе. - + Wrong number of selected objects! tangent constraint Неправильное количество выбранных объектов! - - - + + + Cannot add a tangency constraint at an unconnected point! Не удаётся наложить ограничение касательности на точку, так как выделенная точка не является концом кривой. - - - + + + Tangency to B-spline edge currently unsupported. Касательность к краю B-сплайна в настоящее время не поддерживается. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Применена касательность конечной точки к конечной точке. Ограничение совпадения было удалено. - - - - + + + + Select one or more arcs or circles from the sketch. Сначала выделите одну или несколько окружностей или дуг окружности из эскиза. - - + + Constrain equal Ограничение равности - + Do you want to share the same radius for all selected elements? Сделать ли радиусы всех выбранных окружностей и дуг равными? - - + + Constraint only applies to arcs or circles. Ограничение применимо только к дугам или окружностям. - + Do you want to share the same diameter for all selected elements? Сделать ли диаметры всех выбранных окружностей и дуг равными? - - + + Select one or two lines from the sketch. Or select two edges and a point. Нужно выделить одну линию, или две линии, или две кривые и точку. - - + + Parallel lines Параллельные линии - - + + An angle constraint cannot be set for two parallel lines. Задать ограничение угла между параллельными линиями невозможно. - + Cannot add an angle constraint on an axis! Наложить ограничение угла на ось невозможно! - + Select two edges from the sketch. Выберите две кромки эскиза. - - + + Select two or more compatible edges Выделите два или более элементов. Можно выбрать либо набор линий, либо набор окружностей и их дуг, либо набор эллипсов и их дуг. - + Sketch axes cannot be used in equality constraints На ось эскиза нельзя накладывать ограничение равенства - + Equality for B-spline edge currently unsupported. Равенство для края B-сплайна в настоящее время не поддерживается. - - + + Select two or more edges of similar type Выбрать две или несколько граней аналогичного типа - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Выделите две точки и линию симметрии, либо две точки и точку симметрии, либо линию и точку симметрии. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Не удается добавить ограничение симметрии, так как обе точки являются концами линии, задающей ось симметрии. - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Нужно выделить две концевые точки линий, выступающих в роли лучей, и кривую, в роли границы раздела. Точка, выбранная первой, соответствует лучу в среде с показателем преломления n1, выбранная второй - n2. Величина ограничения задаёт отношение n2/n1. - + Selected objects are not just geometry from one sketch. Выбранные объекты не являются только геометрией из одного эскиза. - + Number of selected objects is not 3 (is %1). Нужно выделить три объекта, а выделено %1. - + Cannot create constraint with external geometry only!! Невозможно создать ограничение с использованием только внешней геометрии!! - + Incompatible geometry is selected! Выделенная комбинация непригодна для этого ограничения! - + SnellsLaw on B-spline edge currently unsupported. Закон Снелла на краю B-сплайна в настоящее время не поддерживается. - - + + Select at least one ellipse and one edge from the sketch. Выделите хотя бы один эллипс и одну линию из эскиза. - + Sketch axes cannot be used in internal alignment constraint Оси эскиза нельзя привязывать к внутренней геометрии - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Нельзя ограничить эллипс другим эллипсом. Должен быть выделен максимум один эллипс. - - + + Maximum 2 points are supported. К эллипсу можно привязать не более двух точек. - - + + Maximum 2 lines are supported. К эллипсу можно привязать не более двух линий. - - + + Nothing to constrain Нечего ограничивать - + Currently all internal geometry of the ellipse is already exposed. Вся внутренняя геометрия этого эллипса уже занята. - - - - + + + + Extra elements Слишком много элементов - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Предоставлено больше элементов, чем осталось свободной внутренней геометрии. Лишние элементы были проигнорированы. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Вы не можете внутренне ограничить дугу эллипса другой дугой эллипса. Выберите только одну дугу эллипса. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Нельзя ограничить эллипс дугой эллипса. В выделении может быть максимум один эллипс или максимум одна дуга эллипса. - + Currently all internal geometry of the arc of ellipse is already exposed. Вся внутренняя геометрия этой дуги эллипса уже занята. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Предоставлено больше элементов, чем осталось свободной внутренней геометрии. Лишние элементы были проигнорированы. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Внутренняя геометрия доступна только для эллипсов и дуг эллипса. Эллипс/дуга эллипса должна быть выделена в последнюю очередь. - - - - - + + + + + @@ -2804,7 +2804,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Выберите ограничения в эскизе. - + CAD Kernel Error Ошибка ядра CAD @@ -2939,42 +2939,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Точная копия вызывает круговую зависимость. - + This object is in another document. Этот объект находится в другом документе. - + This object belongs to another body. Hold Ctrl to allow cross-references. Этот объект принадлежит другому телу. Удерживайте Ctrl, чтобы разрешить перекрёстные ссылки. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Этот объект принадлежит другому телу и содержит внешнюю геометрию. Перекрёстная ссылка не допускается. - + This object belongs to another part. Этот объект принадлежит другой детали. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Выбранный эскиз не параллелен этому эскизу. Удерживайте Ctrl+Alt, чтобы разрешить непараллельные эскизы. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Оси XY выбранного эскиза не имеют того же направления, что и этот эскиз. Удерживайте Ctrl+Alt, чтобы игнорировать это. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Исходная точка выбранного эскиза не выровнена с исходной точкой этого эскиза. Удерживайте Ctrl+Alt, чтобы игнорировать это. @@ -3060,8 +3060,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Введите радиус - - + + Radius: Радиус: @@ -3072,8 +3072,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Введите диаметр - - + + Diameter: Диаметр: @@ -3101,24 +3101,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Длина: - - + + Change radius Изменить радиус - - + + Change diameter Изменить диаметр - + Refractive index ratio Отношение показателей преломления - + Ratio n2/n1: Отношение n2/n1: @@ -3134,22 +3134,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Связывание вызовет циклическую зависимость. - + This object is in another document. Этот объект находится в другом документе. - + This object belongs to another body, can't link. Этот объект принадлежит другому телу, и не может быть связан. - + This object belongs to another part, can't link. Этот объект принадлежит другой детали, и не может быть связан. @@ -3190,8 +3190,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Безымянный @@ -3326,7 +3326,7 @@ reflected on copies Normal Geometry - Нормальная геометрия + Основная геометрия @@ -3907,6 +3907,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Все ограничения, связанные с внешней геометрией, были удалены. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4201,7 +4221,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Auto constraints - Авто ограничения + Автоматические ограничения @@ -4211,7 +4231,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Avoid redundant auto constraints - Избегать избыточные автоограничения + Избегать избыточных автоматических ограничений @@ -4253,70 +4273,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Проверка наброска - + Invalid constraints Неисправные ограничения - - + + + Fix Исправить - - + + + Find Найти - + Delete constraints to external geom. Удалить ограничения к геом. извне - + Missing coincidences Пропущенные коинцидентности - + Tolerance: Допуск: - + Highlight open vertexes Подсветить открытые вершины - + Ignore construction geometry Игнорировать вспомогательную геометрию + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Перевёрнутая внешняя геометрия - + Swap endpoints in constraints Переставить концы в ограничениях - + Constraint orientation locking Фиксация ориентации ограничения - + Enable/Update Включить/Пересчитать - + Disable Отключить @@ -4324,104 +4351,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Редактировать эскиз - + A dialog is already open in the task panel Диалог уже открыт в панели задач - + Do you want to close this dialog? Вы хотите закрыть этот диалог? - + Invalid sketch Эскиз повреждён - + Do you want to open the sketch validation tool? Открыть инструмент проверки наброска? - + The sketch is invalid and cannot be edited. Эскиз содержит ошибки и не может быть изменен. - + Please remove the following constraint: Пожалуйста, удалите следующие ограничения: - + Please remove at least one of the following constraints: Пожалуйста, удалите по крайней мере одно из следующих ограничений: - + Please remove the following redundant constraint: Пожалуйста, удалите следующие избыточные ограничения: - + Please remove the following redundant constraints: Пожалуйста, удалите следующие избыточные ограничения: - + Empty sketch Эскиз не содержащий элементов - + Over-constrained sketch Чрезмерно ограниченный эскиз - - - + + + (click to select) (выделить) - + Sketch contains conflicting constraints Эскиз с конфликтующими ограничениями - + Sketch contains redundant constraints Эскиз с избыточными ограничениями - + Fully constrained sketch Эскиз не содержит степеней свободы - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Недостаточно ограниченный эскиз с <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 оставшейся</span></a> степенью свободы - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Недостаточно ограниченный эскиз с <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 оставшимися</span></a> степенями свободы - + Solved in %1 sec Обсчитан за %1 сек - + Unsolved (%1 sec) Не решается (%1 сек) @@ -4510,8 +4537,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Задать диаметр окружности или дуги @@ -4519,8 +4546,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Зафиксировать радиус окружности или дуги @@ -4537,8 +4564,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Создать дугу, указав её конечные точки и точку вдоль дуги @@ -4546,8 +4573,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Создать окружность, проходящую через три точки @@ -4555,8 +4582,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Создать дугу по её центру и её конечным точкам @@ -4564,8 +4591,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Создать дугу эллипса по центру, большому радиусу и концевым точкам @@ -4573,8 +4600,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Создать дугу гиперболы по ее центру, большой полуоси, конечным точкам @@ -4582,8 +4609,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Создать дугу параболы по ее фокусу, вершине, конечным точкам @@ -4591,13 +4618,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-сплайн по контрольным точкам - - + + Create a B-spline by control points Создать B-сплайн по контрольным точкам @@ -4605,8 +4632,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Создать круг, используя его центр и периферийную точку @@ -4614,8 +4641,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Создать дугу эллипса по большому диаметру и точке @@ -4623,8 +4650,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Создать эллипс по центру и двум радиусам @@ -4632,8 +4659,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Создать правильный семиугольник @@ -4641,8 +4668,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Создать правильный шестиугольник @@ -4650,14 +4677,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Создать правильный восьмиугольник - - + + Create a regular polygon by its center and by one corner Создать правильный многоугольник по центру и одному углу @@ -4665,8 +4692,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Создать правильный пятиугольник @@ -4674,8 +4701,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Создать квадрат @@ -4683,8 +4710,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Создать правильный треугольник @@ -4692,13 +4719,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Периодический B-сплайн по контрольным точкам - - + + Create a periodic B-spline by control points Создать периодический B-сплайн по контрольным точкам diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.qm index e770d979b8..830d027a2d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts index e00ee8de3d..2eeb71f2eb 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Uzamknúť priemer - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Vytvoriť oblúk - + Create an arc in the sketcher Vytvoriť oblúk v náčrte - + Center and end points Stred a koncové body - + End points and rim point Koncový bod a krajný bod @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Vytvoriť kružnicu - + Create a circle in the sketcher Vytvorenie kruhu v náčrte - + Center and rim point Stred a krajný bod - + 3 rim points 3 krajný body @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Vytvoriť kužeľosečku - + Create a conic in the sketch Vytvoriť Kužeľosečku na náčrte - + Ellipse by center, major radius, point Elipsa pomocou stredu, väčšieho polomeru a bodu - + Ellipse by Periapsis, apoapsis, minor radius Elipsa pomocou perihélia, afélia a menšieho priemeru - + Arc of ellipse by center, major radius, endpoints Elipsa pomocou stredu, väčšieho polomeru a bodu - + Arc of hyperbola by center, major radius, endpoints Elipsa pomocou stredu, väčšieho polomeru a bodu - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Vytvoriť pravidelný mnohouholník - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Trojuholník - + Square Štvorec - + Pentagon Päťuholník - + Hexagon Šesťuholník - + Heptagon Sedemuholník - + Octagon Osemuholník - + Regular Polygon Rovnostranný mnohouholník @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Väzobný uhol - + Fix the angle of a line or the angle between two lines Stanoviť uhol čiary alebo uhol medzi dvoma čiarami @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Obmedziť zhodnosť - + Create a coincident constraint on the selected item Vytvoriť zhodné obmedzenie pre vybrané položky @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Obmedziť vzdialenosť - + Fix a length of a line or the distance between a line and a vertex Stanoviť dĺžku čiary alebo vzdialenosť medzi čiarou a vrcholom @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Stanoviť horizontálnu vzdialenosť medzi dvoma bodmi alebo priamkami @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Stanoviť vertikálnu vzdialenosť medzi dvoma bodmi alebo priamkami @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Obmedziť rovnaké - + Create an equality constraint between two lines or between circles and arcs Vytvoriť obmedzenie rovnosti medzi dvoma čiarami alebo kružnicami a oblúkmi @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Obmedziť vodorovne - + Create a horizontal constraint on the selected item Vytvoriť horizontálne obmedzenie pre vybratú položku @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Zámok obmedzenia - + Create a lock constraint on the selected item Vytvoriť zámok obmedzenia pre vybratú položku @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Obmedziť paralelné - + Create a parallel constraint between two lines Vytvoriť paralelné obmedzenie medzi dvoma čiarami @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Constrain perpendicular - + Create a perpendicular constraint between two lines Vytvoriť kolmé obmedzenie medzi dvoma čiarami @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Obmedziť bod na objekt - + Fix a point onto an object Stanoviť bod na objekt @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Uzamknúť priemer - + Fix the radius of a circle or an arc Stanoviť polomer kružnice alebo oblúka @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point Vytvoriť symetrické obmedzenie medzi dvoma bodmi vo vzťahu k čiaram alebo tretieho bodu @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Constrain tangent - + Create a tangent constraint between two entities Vytvoriť dotyčnicové obmedzenie medzi dvoma subjektami @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Obmedziť vertikálne - + Create a vertical constraint on the selected item Vytvoriť vertikálne obmedzenie pre vybratú položku @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Create arc by three points - + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Create circle by three points - + Create a circle by 3 perimeter points Create a circle by 3 perimeter points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Create arc by center - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Create an arc of ellipse - + Create an arc of ellipse in the sketch Create an arc of ellipse in the sketch @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Create an arc of hyperbola - + Create an arc of hyperbola in the sketch Create an arc of hyperbola in the sketch @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Create an arc of parabola - + Create an arc of parabola in the sketch Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Vytvoriť kružnicu - + Create a circle in the sketch Vytvoriť kružnicu v náčrte @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Vytvoriť pomocnú čiaru - + Create a draft line in the sketch Vytvoriť pomocnú čiaru v náčrte @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Create ellipse by 3 points - + Create an ellipse by 3 points in the sketch Create an ellipse by 3 points in the sketch @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Create ellipse by center - + Create an ellipse by center in the sketch Create an ellipse by center in the sketch @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Create fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Create heptagon - + Create a heptagon in the sketch Create a heptagon in the sketch @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Create hexagon - + Create a hexagon in the sketch Create a hexagon in the sketch @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Vytvoriť čiaru - + Create a line in the sketch Vytvoriť čiaru v náčrte @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Vytvoriť Osemuholník - + Create an octagon in the sketch Vytvoriť osemuholník v náčrte @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Vytvoriť päťuholník - + Create a pentagon in the sketch Vytvoriť päťuholník v náčrte @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Vytvoriť bod - + Create a point in the sketch V náčrte vytvoriť bod @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Vytvoriť krivku - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Vytvoriť obdĺžnik - + Create a rectangle in the sketch V náčrte vytvoriť obdĺžnik @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Vytvoriť pravidelný mnohouholník - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Create slot - + Create a slot in the sketch Create a slot in the sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Vytvoriť štvorec - + Create a square in the sketch Vytvoriť štvorec v náčrte @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Vytvoriť Text - + Create text in the sketch V náčrte vytvoriť text @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Create equilateral triangle - + Create an equilateral triangle in the sketch Create an equilateral triangle in the sketch @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry External geometry - + Create an edge linked to an external geometry Vytvoriť hranu prepojenú na externú geometriu @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Trim edge - + Trim an edge with respect to the picked position Trim an edge with respect to the picked position @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Select edge(s) from the sketch. - - - - + + + + Dimensional constraint Dimensional constraint @@ -2232,273 +2232,273 @@ One of the selected has to be on the sketch - - + + Select an edge from the sketch. Z náčrtu vybrať hrany. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Obmedzenie nie je možné - - - - + + + + The selected edge is not a line segment The selected edge is not a line segment - - - - - - + + + + + + Double constraint Dvojité obmedzenie - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! The selected item(s) can't accept a horizontal constraint! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! The selected item(s) can't accept a vertical constraint! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Chyba - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Z náčrtu vybrať vrcholy. - - + + Select exactly one line or one point and one line or two points from the sketch. Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an axis! Cannot add a length constraint on an axis! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an axis! Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Select two or more lines from the sketch. - - + + Select at least two lines from the sketch. Select at least two lines from the sketch. - + Select a valid line Select a valid line - - + + The selected edge is not a valid line The selected edge is not a valid line - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. perpendicular constraint Select some geometry from the sketch. - + Wrong number of selected objects! perpendicular constraint Wrong number of selected objects! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint With 3 objects, there must be 2 curves and 1 point. - - + + Cannot add a perpendicularity constraint at an unconnected point! Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. One of the selected edges should be a line. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Select some geometry from the sketch. - + Wrong number of selected objects! tangent constraint Wrong number of selected objects! - - - + + + Cannot add a tangency constraint at an unconnected point! Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Select one or more arcs or circles from the sketch. - - + + Constrain equal Obmedziť rovnaké - + Do you want to share the same radius for all selected elements? Do you want to share the same radius for all selected elements? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines Parallel lines - - + + An angle constraint cannot be set for two parallel lines. An angle constraint cannot be set for two parallel lines. - + Cannot add an angle constraint on an axis! Cannot add an angle constraint on an axis! - + Select two edges from the sketch. Select two edges from the sketch. - - + + Select two or more compatible edges Select two or more compatible edges - + Sketch axes cannot be used in equality constraints Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Select two or more edges of similar type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). Number of selected objects is not 3 (is %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Incompatible geometry is selected! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint Sketch axes cannot be used in internal alignment constraint - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Maximum 2 points are supported. - - + + Maximum 2 lines are supported. Maximum 2 lines are supported. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select constraint(s) from the sketch. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - - + + Radius: Polomer: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Dĺžka: - - + + Change radius Change radius - - + + Change diameter Change diameter - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Pomer n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Nepomenovaný @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Validácia náčrtu - + Invalid constraints Neplatné obmedzenie - - + + + Fix Fix - - + + + Find Find - + Delete constraints to external geom. Delete constraints to external geom. - + Missing coincidences Missing coincidences - + Tolerance: Tolerance: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Enable/Update - + Disable Disable @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Upraviť náčrt - + A dialog is already open in the task panel Na paneli úloh je už dialóg otvorený - + Do you want to close this dialog? Chcete zatvoriť tento dialóg? - + Invalid sketch Neplatný náčrt - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Please remove the following constraint: - + Please remove at least one of the following constraints: Please remove at least one of the following constraints: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + Empty sketch Prázdny náčrt - + Over-constrained sketch Nadmerne obmedzený náčrt - - - + + + (click to select) (kliknutím vyberte) - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Stanoviť polomer kružnice alebo oblúka @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Create an arc of ellipse by its center, major radius, endpoints @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Create a circle by its center and by a rim point @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Create a heptagon by its center and by one corner @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Create a hexagon by its center and by one corner @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Create a pentagon by its center and by one corner @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Create a square by its center and by one corner @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Create an equilateral triangle by its center and by one corner @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm index 1096bac639..875787b3bf 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index db730c5580..4d7bb31a02 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -65,28 +65,28 @@ Show/Hide B-spline control polygon - Prikaži/skrij nadzorni poligon B-zlepka + Prikaži/skrij nadzorni mnogokotnik B-zlepka Switches between showing and hiding the control polygons for all B-splines - Preklopi med prikazanimi in skritimi nadzornimi poligoni za vse B-zlepke + Preklopi med prikazanimi in skritimi nadzornimi mnogokotniki za vse B-zlepke CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy KarbonskaKopija - + Copies the geometry of another sketch Kopira geometrijo druge skice @@ -148,7 +148,7 @@ Show/Hide B-spline control polygon - Prikaži/skrij nadzorni poligon B-zlepka + Prikaži/skrij nadzorni mnogokotnik B-zlepka @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Omeji krožni lok ali krožnico - + Constrain an arc or a circle Omeji krožni lok ali krožnico - + Constrain radius Omejitev polmera - + Constrain diameter Omeji premer @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Ustvari lok v skicirniku - + Center and end points Središče in končni točki - + End points and rim point Končni točki in točka na obodu @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Ustvari B-zlepek - + Create a B-spline in the sketch Ustvari B-zlepek v skici @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Ustvari krog - + Create a circle in the sketcher Ustvari krog v skicirniku - + Center and rim point Središče in točka na obodu - + 3 rim points 3 točke na obodu @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Ustvari stožnico - + Create a conic in the sketch Ustvari stožnico v skici - + Ellipse by center, major radius, point Elipsa s središčem, velikim polmerom in točko - + Ellipse by Periapsis, apoapsis, minor radius Elipsa z periapsido, apoapsido in malim polmerom - + Arc of ellipse by center, major radius, endpoints Lok elipse s središčem, velikim polmerom in končnima točkama - + Arc of hyperbola by center, major radius, endpoints Lok hiperbole s središčem, velikim polmerom in končnima točkama - + Arc of parabola by focus, vertex, endpoints Lok parabole z goriščem, temenom in končnima točkama @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Ustvari preprosti mnogokotnik - + Create a regular polygon in the sketcher - Ustvari preprosti mnogokotnik v skicirniku + Ustvari pravilni mnogokotnik v očrtovalniku - + Triangle Trikotnik - + Square Kvadrat - + Pentagon Petkotnik - + Hexagon Šestkotnik - + Heptagon Sedemkotnik - + Octagon Osemkotnik - + Regular Polygon Pravilni Mnogokotnik @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Kotna omejitev - + Fix the angle of a line or the angle between two lines Pritrdi kot črte ali kot med dvema črtama @@ -444,35 +444,35 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Omeji z Zaklepanjem - + Create a Block constraint on the selected item - Ustvari omejitev Zaklepanja na izbranem predmetu + Ustvari Popolno omejilo na izbranem predmetu CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Omejitev sovpadanja - + Create a coincident constraint on the selected item Ustvari omejitev sovpadanja na izbranem predmetu @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Omeji premer - + Fix the diameter of a circle or an arc Pritrdi premer krožnice ali krožnega loka @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Omejitev razdalje - + Fix a length of a line or the distance between a line and a vertex Pritrdi dolžino črte ali razdaljo med črto in temenom @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Pritrdi vodoravno razdaljo med dvema točkama ali krajiščema @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Pritrdi navpično razdaljo med dvema točkama ali krajiščema @@ -552,35 +552,35 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Omejitev enakosti - + Create an equality constraint between two lines or between circles and arcs - Ustvari omejitev enakosti med dvema črtama ali med krogi in loki + Ustvari enakostno omejilo med dvema črtama ali med krogi in loki CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Vodoravna omejitev - + Create a horizontal constraint on the selected item Ustvari vodoravno omejitev na izbranem predmetu @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Omejitev notranje poravnave - + Constrains an element to be aligned with the internal geometry of another element Poravna element z notranjo geometrijo drugega elementa @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock - Zaklenjena omejitev + Zaklenjeno omejilo - + Create a lock constraint on the selected item Ustvari zaklenjeno omejitev na izbranem predmetu @@ -624,35 +624,35 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel - Vzporedna omejitev + Omejilo vzporednosti - + Create a parallel constraint between two lines - Ustvari vzporedno omejitev med dvema črtama + Ustvari omejilo vzporednosti med dvema črtama CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Pravokotna omejitev - + Create a perpendicular constraint between two lines Ustvari pravokotno omejitev med dvema črtama @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Omeji točko na objekt - + Fix a point onto an object Pritrdi točko na objekt @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Omejitev polmera - + Fix the radius of a circle or an arc Pritrdi polmer kroga ali loka @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Lomna omejitev (lomni zakon) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Ustvari omejitev lomnega zakona med dvema končnima točkama žarkov in robom kot mejo. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Simetrična omejitev - + Create a symmetry constraint between two points with respect to a line or a third point Ustvari omejitev somernosti med dvema točkama glede na črto ali tretjo točko @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Tangentna omejitev - + Create a tangent constraint between two entities Ustvari tangentno omejitev med dvema entitetama @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Navpična omejitev - + Create a vertical constraint on the selected item Ustvari navpično omejitev na izbranem predmetu @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Ustvari lok s tremi točkami - + Create an arc by its end points and a point along the arc Ustvari lok s končnima točkama in točko na njem @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Ustvari krog s tremi točkami - + Create a circle by 3 perimeter points Ustvari krog s trem točkami na obodu @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Ustvari lok s središčem - + Create an arc by its center and by its end points Ustvari lok s središčem in končnima točkama @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Ustvari eliptični lok - + Create an arc of ellipse in the sketch Ustvari eliptični lok v skici @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Ustvari lok hiperbole - + Create an arc of hyperbola in the sketch Ustvari lok hiperbole v skici @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Ustvari lok parabole - + Create an arc of parabola in the sketch Ustvari lok parabole v skici @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Ustvari B-zlepek - + Create a B-spline via control points in the sketch. Ustvari B-zlepek preko kontrolnih točk v skici. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Ustvari krog - + Create a circle in the sketch Ustvari krog v skici @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Ustvari črto nagiba - + Create a draft line in the sketch Ustvari črto nagiba v skici @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Ustvari elipso s tremi točkami - + Create an ellipse by 3 points in the sketch Ustvari elipso s tremi točkami v skici @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Ustvari elipso s središčem - + Create an ellipse by center in the sketch Ustvari elipso s središčem v skici @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Ustvari zaokrožitev - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Ustvari sedemkotnik - + Create a heptagon in the sketch Ustvari sedemkotnik v skici @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Ustvari šestkotnik - + Create a hexagon in the sketch Ustvari šestkotnik v skici @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Ustvari črto - + Create a line in the sketch Ustvari črto v skici @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Ustvari osemkotnik - + Create an octagon in the sketch Ustvari osemkotnik v skici @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Ustvari petkotnik - + Create a pentagon in the sketch Ustvari petkotnik v skici @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Ustvari periodični B-zlepek - + Create a periodic B-spline via control points in the sketch. Ustvari periodični B-zlepek preko kontrolnih točk v skici. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Ustvari točko - + Create a point in the sketch Ustvari točko v skici @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Ustvari črtovje - + Create a polyline in the sketch. 'M' Key cycles behaviour Ustvari črtovje v očrtu. Tipka 'M' preklaplja med obnašanji @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Ustvari pravokotnik - + Create a rectangle in the sketch Ustvari pravokotnik v skici @@ -1182,35 +1182,35 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Ustvari preprosti mnogokotnik - + Create a regular polygon in the sketch - Ustvari pravilni mnogokotnik v skici + Ustvari pravilni mnogokotnik v očrtu CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Ustvari utor - + Create a slot in the sketch Ustvari utor v skici @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Ustvari kvadrat - + Create a square in the sketch Ustvari kvadrat v skici @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Ustvari besedilo - + Create text in the sketch Ustvari besedilo v skici @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Ustvari enakostranični trikotnik - + Create an equilateral triangle in the sketch Ustvari enakostranični trikotnik v skici @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Podaljšaj rob - + Extend an edge with respect to the picked position Podaljšaj rob glede na izbran položaj @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Zunanja geometrija - + Create an edge linked to an external geometry Ustvari rob povezan z zunanjo geometrijo @@ -1603,7 +1603,7 @@ Select Conflicting Constraints - Izberi omejitve v sporu + Izberi omejila v sporu @@ -1653,7 +1653,7 @@ Select elements where the solver still detects unconstrained degrees of freedom. - Izberi elemente kjer reševalnik še vedno zazne neomejene prostostne stopnje. + Izberi elemente kjer reševalnik še vedno zazna neomejene prostostne stopnje. @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Preklopi aktiviraj/deaktiviraj omejitev - + Toggles activate/deactivate state for selected constraints Preklopi aktiviraj/deaktiviraj stanje izbranih omejitev @@ -1817,35 +1817,35 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint - Preklopi osnovno/gonilno omejitev + Preklopi med sklicnim in gonilnim omejilom - + Toggles the toolbar or selected constraints to/from reference mode - Preklopi orodno vrstico ali izbrane omejitve v/iz osnovnega načina + Preklopi orodno vrstico ali izbrana omejila v/iz sklicnega načina CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Prireži rob - + Trim an edge with respect to the picked position Prireži rob glede na izbrani položaj @@ -1919,80 +1919,80 @@ Autoconstrain error: Unsolvable sketch while applying coincident constraints. - Napaka samodejne omejitve: Nerešljiva skica med uporabo omejitve sovpadanja. + Napaka samodejnega omejila: Nerešljiv očrt pri uveljavitvi omejil sovpadanja. Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. - Napaka samodejne omejitve: Nerešljiva skica med uporabo navpične/vodoravne omejitve. + Napaka samodejnega omejila: Nerešljiv očrt pri uveljavitvi navpičnostnih/vodoravnostnih omejil. Autoconstrain error: Unsolvable sketch while applying equality constraints. - Napaka samodejne omejitve: Nerešljiva skica med uporabo enakostne omejitve. + Napaka samodejnega omejila: Nerešljiv očrt pri uporabi enakostnih omejil. Autoconstrain error: Unsolvable sketch without constraints. - Napaka samodejne omejitve: Nerešljiva skica brez omejitev. + Napaka samodejnega omejila: Nerešljiv načrt brez omejil. Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. - Napaka samodejne omejitve: Nerešljiva skica po uporabi vodoravne in navpične omejitve. + Napaka samodejnega omejila: Nerešljiv očrt po uveljavitivi vodoravnostnih in navpičnostnih omejil. Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. - Napaka samodejne omejitve: Nerešljiva skica po uporabi omejitve točka-na-točko. + Napaka samodejnega omejila: Nerešljiv očrt po uveljavitivi omejila točka-na-točko. Autoconstrain error: Unsolvable sketch after applying equality constraints. - Napaka samodejne omejitve: Nerešljiva skica po uporabi enakostne omejitve. + Napaka samodejnega omejila: Nerešljiv očrt po uveljavitiv enakostnega omejila. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - Ni mogoče uganiti presečišča krivulj. Poskusite dodati omejitev sovpadanja med vozlišči krivulj, ki jih nameravate zaokrožiti. + Ni mogoče uganiti presečišča krivulj. Poskusite dodati omejilo sovpadanja med vozlišči krivulj, ki jih nameravate zaokrožiti. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ta različica OCE/OCC ne podpira dela z vozli. Potrebuješ različico 6.9.0 ali višjo. - + BSpline Geometry Index (GeoID) is out of bounds. Kazalo geometrije B-zlepka (GeoID) je izven omejitev. - + You are requesting no change in knot multiplicity. Ne zahtevate spremembe večkratnosti vozla. - + The Geometry Index (GeoId) provided is not a B-spline curve. Priskrbljeno kazalo geometrije (GeoId) ni krivulja B-zlepek. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - Kazalo vozla je izven omejitev. Upoštevajte, da v skladu z OCC zapisom, ima prvi vozel indeks 1 in ne nič. + Oznaka vozla je izven meja. Upoštevajte, da ima v skladu z OCC zapisom prvi vozel oznako 1 in ne nič. - + The multiplicity cannot be increased beyond the degree of the B-spline. Večkratnost ne more biti povečana preko stopnje B-zlepka. - + The multiplicity cannot be decreased beyond zero. Večkratnost ne more biti zmanjšana pod ničlo. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC ne more zmanjšati večkratnost znotraj največjega dopustnega odstopanja. @@ -2017,12 +2017,12 @@ There are no modes that accept the selected set of subelements - Ni načinov, ki bi sprejel izbrani niz podelementov + Ni načina, ki bi sprejel izbrani niz podprvin Broken link to support subelements - Pokvarjena povezava za podporo podelementov + Pokvarjena povezava za podporo podprvin @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Izberite robove na skici. - - - - + + + + Dimensional constraint Merska omejitev @@ -2217,7 +2217,7 @@ Cannot add a constraint between two fixed geometries! Fixed geometries involve external geometry, blocked geometry or special points as B-spline knot points. - Ni mogoče dodati omejitve med dvema pritrjenima geometrijama! Pritrjene geometrije vključujejo zunanjo geometrijo, blokirano geometrijo ali posebne točke kot vozliščne točke B-zlepka. + Ni mogoče dodati omejila med dvema nespremenljivima geometrijama! Nespremenljive geometrije vključujejo zunanjo geometrijo, zamrznjeno geometrijo ali posebne točke kot vozlišča B-zlepka. @@ -2232,273 +2232,273 @@ Eden od izbranih mora biti na skici - - + + Select an edge from the sketch. Izberite rob na skici. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Nemogoča omejitev - - - - + + + + The selected edge is not a line segment Izbrani rob ni črtni odsek - - - - - - + + + + + + Double constraint Dvojna omejitev - - - - + + + + The selected edge already has a horizontal constraint! Izbran rob že ima vodoravno omejitev! - - - - + + + + The selected edge already has a vertical constraint! Izbran rob že ima navpično omejitev! - - - - - - + + + + + + The selected edge already has a Block constraint! - Izbran rob že ima navpično Blok omejitev! + Izbran rob že ima popolno omejitev! - + The selected item(s) can't accept a horizontal constraint! Izbranih predmetov ni mogoče vodoravno omejiti! - + There are more than one fixed point selected. Select a maximum of one fixed point! - Izbrana je več kot ena pritrjena točka. Izberite največ eno pritrjeno točko! + Izbrana je več kot ena nepremična točka. Izberite največ eno nepremično točko! - + The selected item(s) can't accept a vertical constraint! Izbranih predmetov ni mogoče navpično omejiti! - + There are more than one fixed points selected. Select a maximum of one fixed point! - Izbrana je več kot ena pritrjena točka. Izberite največ eno pritrjeno točko! + Izbrana je več kot ena nepremična točka. Izberite največ eno nepremično točko! - - + + Select vertices from the sketch. Izberite vozlišča na skici. - + Select one vertex from the sketch other than the origin. Izberite teme na skici, ki ni izhodišče. - + Select only vertices from the sketch. The last selected vertex may be the origin. Izberite samo vozlišča na skici. Zadnje izbrano vozlišče je lahko izhodišče. - + Wrong solver status Napačen stanje reševalnika - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - Blok omejitev ne more biti dodana, če skica ni rešena ali ima odvečne in/ali nasprotujoče si omejitve. + Popolna omejitev ni mogoča, če očrt ni rešen ali ima odvečna in/ali nasprotujoča si omejila. - + Select one edge from the sketch. Izberite en rob na skici. - + Select only edges from the sketch. Izberite samo robove na skici. - - - - - - - + + + + + + + Error Napaka - + Select two or more points from the sketch. Izberite dve ali več točk na skici. - - + + Select two or more vertexes from the sketch. - Izberite dva ali več temen na skici. + Izberite dve ali več oglišč na očrtu. - - + + Constraint Substitution Zamenjava omejitve - + Endpoint to endpoint tangency was applied instead. Namesto tega je bila uporabljena tangentnost med končnima točkama. - + Select vertexes from the sketch. Izberite temena na skici. - - + + Select exactly one line or one point and one line or two points from the sketch. Izberite natanko eno črto ali točko in eno črto ali dve točki na skici. - + Cannot add a length constraint on an axis! Omejitve dolžine ni mogoče dodati na os! - + This constraint does not make sense for non-linear curves - Ta omejitev ni smiselna za nelinearne krivulje + To omejilo ni smiselno za nepreme krivulje - - - - - - + + + + + + Select the right things from the sketch. Izberite prave stvari na skici. - - + + Point on B-spline edge currently unsupported. Točka na B-zlepek robu je trenutno nepodprta. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nobena od izbranih točk ni bila omejena na ustrezno krivuljo, ker ali so del istega elementa ali sta obe zunanji geometriji. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Izberite ali eno točko in več krivulj ali eno krivuljo in več točk. Izbrali ste %1 krivulj in %2 točk. - - - - + + + + Select exactly one line or up to two points from the sketch. Izberite natanko eno črto ali do dve točki na skici. - + Cannot add a horizontal length constraint on an axis! Omejitve vodoravne dolžine ni mogoče dodati na os! - + Cannot add a fixed x-coordinate constraint on the origin point! - Omejitve pritrjena x-koordinata ni mogoče dodati na izhodiščno točko! + Omejila z nespremenljivo sorednico x ni mogoče dodati na izhodiščno točko! - - + + This constraint only makes sense on a line segment or a pair of points Ta omejitev je smiselna samo na črtnem odseku ali na paru točk - + Cannot add a vertical length constraint on an axis! Omejitve navpične dolžine ni mogoče dodati na os! - + Cannot add a fixed y-coordinate constraint on the origin point! - Omejitve pritrjene koordinate Y ni mogoče dodati na izvorno točko! + Omejila z nespremenljivo sorednico y ni mogoče dodati na izhodiščno točko! - + Select two or more lines from the sketch. Izberite dva ali več črt na skici. - - + + Select at least two lines from the sketch. Izberite vsaj dve črti na skici. - + Select a valid line Izberite veljavno črto - - + + The selected edge is not a valid line Izbrani rob ni veljavna črta - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni točki, dve krivulji in točka. - + Select some geometry from the sketch. perpendicular constraint Izberite geometrijo na skici. - + Wrong number of selected objects! perpendicular constraint Napačno število izbranih objektov! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Pri 3-h objektih morata obstajati 2 krivulji in 1 točka. - - + + Cannot add a perpendicularity constraint at an unconnected point! Pravokotne omejitve ni mogoče dodati na nepovezano točko! - - - + + + Perpendicular to B-spline edge currently unsupported. Pravokotno na B-zlepek rob je trenutno nepodprto. - - + + One of the selected edges should be a line. En od izbranih robov mora biti črta. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni točki, dve krivulji in točka. - + Select some geometry from the sketch. tangent constraint Izberite geometrijo na skici. - + Wrong number of selected objects! tangent constraint Napačno število izbranih objektov! - - - + + + Cannot add a tangency constraint at an unconnected point! Tangentne omejitve ni mogoče dodati na nepovezano točko! - - - + + + Tangency to B-spline edge currently unsupported. Tangentnost na B-zlepek rob je trenutno nepodprta. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - Uporabljena je bla tangentnost med končnima točkama. Omejitev sovpadanja je bila izbrisana. + Uporabljena je bla dotikalnost med krajiščema. Omejilo sovpadanja je bilo izbrisano. - - - - + + + + Select one or more arcs or circles from the sketch. Izberite enega ali več lokov ali krogov na skici. - - + + Constrain equal Omejitev enakosti - + Do you want to share the same radius for all selected elements? Ali želite uporabiti enak polmer za vse izbrane elemente? - - + + Constraint only applies to arcs or circles. Omejitev velja samo za loke ali krožnice. - + Do you want to share the same diameter for all selected elements? Ali želite uporabiti enak premer za vse izbrane elemente? - - + + Select one or two lines from the sketch. Or select two edges and a point. Izberite eno ali dve črti na skici, ali dva robova in točko. - - + + Parallel lines - Vzporedni črti + Vzporedne črte - - + + An angle constraint cannot be set for two parallel lines. - Kotne omejitve ni mogoče nastaviti za dve vzporedni črti. + Kotnega omejila ni mogoče nastaviti za dve vzporedni črti. - + Cannot add an angle constraint on an axis! Kotne omejitve ni mogoče dodati na os! - + Select two edges from the sketch. Izberite dva robova na skici. - - + + Select two or more compatible edges Izberite dva ali več združljivih robov - + Sketch axes cannot be used in equality constraints - Osi skice ni mogoče uporabiti za omejitve enakosti + Osi očrta ni mogoče uporabiti za enakostno omejilo - + Equality for B-spline edge currently unsupported. Enakost za B-zlepek rob je trenutno nepodprta. - - + + Select two or more edges of similar type Izberite dva ali več robov podobne vrste - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Izberite dve točki in somernico, dve točki in točko somernosti ali črto in točko somernosti na očrtu. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Omejitve somernosti ni mogoče dodati med črto in njenima krajiščema! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Izberite dve končni točki, ki naj se uporabita kot žarka in rob, ki predstavlja mejo. Prva izbrana točka ustreza kazalu n1, druga kazalu n2 in vrednost osnovne mere nastavi razmerje n2/n1. - + Selected objects are not just geometry from one sketch. Izbrani objekti niso samo geometrija iz skice. - + Number of selected objects is not 3 (is %1). Število izbranih objektov ni 3 (ampak %1). - + Cannot create constraint with external geometry only!! Omejitve ni mogoče ustvariti samo z zunanjo geometrijo!! - + Incompatible geometry is selected! Izbrana je nezdružljiva geometrija! - + SnellsLaw on B-spline edge currently unsupported. Lomni zakon na B-zlepek robu je trenutno nepodprt. - - + + Select at least one ellipse and one edge from the sketch. Izberite vsaj eno elipso in en rob na skici. - + Sketch axes cannot be used in internal alignment constraint Osi skice ni mogoče uporabiti za poravnavo z notranjo geometrijo - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Elipse ni mogoče notranje omejiti na elipso. Izberite samo eno elipso. - - + + Maximum 2 points are supported. Podprti sta največ dve točki. - - + + Maximum 2 lines are supported. Podprti sta največ dve črti. - - + + Nothing to constrain Ničesar ni za omejiti - + Currently all internal geometry of the ellipse is already exposed. Trenutno je vsa notranja geometrija elipse že izpostavljena. - - - - + + + + Extra elements Dodatni elementi - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Dobavljenih je bilo več elementov za dano elipso, kot je mogoče. Ti so bili prezrti. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Loka elipse ni mogoče notranje omejiti z drugim lokom elipse. Izberi samo en lok elipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Elipse ni mogoče notranje omejiti na lok elipse. Izberite samo eno elipso ali en lok elipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Trenutno je vsa notranja geometrija loka elipse že izpostavljena. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Dobavljenih je bilo več elementov za dan lok elipse, kot je mogoče. Ti so bili prezrti. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Trenutno je notranja geometrija podprta samo za elipso in lok elipse. Zadnji izbrani element mora biti elipsa ali lok elipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Izberite omejitve na skici. - + CAD Kernel Error Napaka CAD Jedra @@ -2941,44 +2941,44 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Kopija bi lahko povzročila krožno odvisnost. - + This object is in another document. Ta objekt je v drugem dokumentu. - + This object belongs to another body. Hold Ctrl to allow cross-references. - This object belongs to another body. Hold Ctrl to allow cross-references. + Ta predmet pripada drugemu telesu. Držite Ctrl, da se omogoči navzkrižno klicevanje. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Ta objekt pripada drugemu delu. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - Izbrana skica ni vzporedna tej skici. Držite Ctrl+Alt da omogočite nevzporedne skice. + Izbrani očrt ni vzporeden temu očrtu. Držite Ctrl+Alt da omogočite nevzporedne očrte. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - XY osi izbrane skice nimajo enake usmerjenosti kot skica. Držite Ctrl+Alt, da tega ne upoštevate. + XY osi izbranegs očrta nimajo enake usmerjenosti kot ta očrt. Držite Ctrl+Alt, da se tega ne upoštevate. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. - Izhodišče izbrane skice ni poravnano z izhodiščem skice. Držite Ctrl+Alt, da tega ne upoštevate. + Izhodišče izbranega očrta ni poravnano z izhodiščem tega očrta. Držite Ctrl+Alt, da se tega ne upoštevate. @@ -2991,7 +2991,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Toggle to/from reference - Preklopi k/od osnove + Preklopi k/od sklica @@ -3062,8 +3062,8 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Vstavi polmer - - + + Radius: Polmer: @@ -3074,8 +3074,8 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Vstavi premer - - + + Diameter: Premer: @@ -3103,24 +3103,24 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Dolžina: - - + + Change radius Spremeni polmer - - + + Change diameter Spremeni premer - + Refractive index ratio Lomni količnik - + Ratio n2/n1: Razmerje n2/n1: @@ -3136,22 +3136,22 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Povezovanje tega bo povzročilo krožno odvisnost. - + This object is in another document. Ta objekt je v drugem dokumentu. - + This object belongs to another body, can't link. Ta objekt pripada drugemu telesu, povezava ni mogoča. - + This object belongs to another part, can't link. Ta objekt pripada drugemu delu, povezava ni mogoča. @@ -3181,7 +3181,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Reference (or constraint) dimension - Reference (or constraint) dimension + Sklicna (ali omejilna) mera @@ -3192,8 +3192,8 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to SketcherGui::PropertyConstraintListItem - - + + Unnamed Neimenovan @@ -3301,17 +3301,16 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to If selected, each element in the array is constrained with respect to the others using construction lines - If selected, each element in the array is constrained -with respect to the others using construction lines + Če je izbrano, bo vsak predmet v razpostavitvi omejen +glede na druge z uporabo pomožnih črt If selected, it substitutes dimensional constraints by geometric constraints in the copies, so that a change in the original element is directly reflected on copies - If selected, it substitutes dimensional constraints by geometric constraints -in the copies, so that a change in the original element is directly -reflected on copies + Če je označeno, v kopijah nadomesti merska omejila z geometrijskimi, +da se spremembe izvirnih predmetov neposredno odrazijo v kopijah @@ -3358,7 +3357,7 @@ reflected on copies Number of Sides: - Število Strani: + Število Stranic: @@ -3559,12 +3558,12 @@ Requires to re-enter edit mode to take effect. Reference constraint color - Barva referenčne omejitve + Barva sklicnega omejila Color of reference constraints in edit mode - Barva referenčne omejitve v načinu urejanja + Barva sklicnih omejil v načinu urejanja @@ -3629,13 +3628,13 @@ Requires to re-enter edit mode to take effect. Color of crosshair cursor. (The one you get when creating a new sketch element.) - Color of crosshair cursor. -(The one you get when creating a new sketch element.) + Barva merka. +(Tistega, ki ga dobite pri ustvaritvi novega očrtnega predmeta.) Cursor crosshair color - Barva križca kurzorja + Barva merka @@ -3668,24 +3667,24 @@ Requires to re-enter edit mode to take effect. Current constraint creation tool will remain active after creation - Current constraint creation tool will remain active after creation + Trenutni ustvarjalnik omejil bo po ustvaritvi ostajl dejaven Constraint creation "Continue Mode" - Constraint creation "Continue Mode" + "Nadaljevalni način" ustvarjanja omejil Line pattern used for grid lines - Line pattern used for grid lines + Črtni vzorec, uporabljen za mrežne črte Base length units will not be displayed in constraints. Supports all unit systems except 'US customary' and 'Building US/Euro'. - Base length units will not be displayed in constraints. -Supports all unit systems except 'US customary' and 'Building US/Euro'. + Enote osovne dolžine v omejilih ne bodo prikazane. +Podprti so vsi merski sistemi razen "Ameriškega merskega sistema" in "Gradbeniškega ZDA/Evro". @@ -3700,7 +3699,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Visibility automation - Avtomatizacija vidnosti + Samodejnost vidnosti @@ -3735,12 +3734,12 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When closing sketch, move camera back to where it was before sketch was opened - When closing sketch, move camera back to where it was before sketch was opened + Pri zapiranju očrta vrni kamero na mesto pred odprtjem očrta Restore camera position after editing - Po urejanju obnovi položaj kamere + Po urejanju povrni položaj kamere @@ -3750,7 +3749,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Applies current visibility automation settings to all sketches in open documents - Applies current visibility automation settings to all sketches in open documents + Uveljavi trenutne nastavitve samodjenosti za vidnost v vseh očrtih odprtih dokumentov @@ -3770,12 +3769,12 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Current sketcher creation tool will remain active after creation - Current sketcher creation tool will remain active after creation + Trenutno orodje za očrtovanje bo po končanem dejanju ostalo dejavno Geometry creation "Continue Mode" - Geometry creation "Continue Mode" + "Nadaljevalni način" ustvarjanja geometrije @@ -3808,7 +3807,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. No missing coincidences found - Nobenega manjkajočega sovpadanja ni bilo najdenega + Nobenega manjkajočega sovpadanja ni bilo mogoče najti @@ -3910,6 +3909,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Vse omejitve, ki so povezane z zunanjo geometrijo, so bile izbrisane. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4182,14 +4201,14 @@ However, no constraints linking to the endpoints were found. Distance between two subsequent grid lines - Distance between two subsequent grid lines + Razdalja med zaporednima mrežnima črtama New points will snap to the nearest grid line. Points must be set closer than a fifth of the grid size to a grid line to snap. - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid size to a grid line to snap. + Nove točke se bodo pripenjale na najbližje črte mreže. +Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mreže. @@ -4256,70 +4275,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Preverjanje veljavnosti skicirnika - + Invalid constraints Neveljavne omejitve - - + + + Fix Popravi - - + + + Find Poišči - + Delete constraints to external geom. Izbriši omejitve na zunanjo geometrijo - + Missing coincidences Manjkajoča sovpadanja - + Tolerance: Toleranca: - + Highlight open vertexes - Označi odprta vozlišča + Izpostavi odprta vozlišča - + Ignore construction geometry Prezri pomožno geometrijo + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Obrnjena zunanja geometrija - + Swap endpoints in constraints Zamenjaj končne točke v omejitvah - + Constraint orientation locking Zaklepanje usmerjenosti omejitev - + Enable/Update Omogoči/Posodobi - + Disable Onemogoči @@ -4327,104 +4353,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Neveljavna skica - + Do you want to open the sketch validation tool? Ali želite odprti orodje za preverjanje veljavnosti skic? - + The sketch is invalid and cannot be edited. Skica je neveljavna in je ni mogoče urejati. - + Please remove the following constraint: Odstranite naslednjo omejitev: - + Please remove at least one of the following constraints: Odstranite vsaj eno od naslednjih omejitev: - + Please remove the following redundant constraint: Odstranite naslednjo odvečno omejitev: - + Please remove the following redundant constraints: Odstranite naslednje odvečne omejitve: - + Empty sketch Prazna skica - + Over-constrained sketch Skica s preveč omejitvami - - - + + + (click to select) (kliknite za izbiro) - + Sketch contains conflicting constraints Skica vsebuje omejitve v sporu - + Sketch contains redundant constraints Skica vsebuje odvečne omejitve - + Fully constrained sketch Popolnoma omejena skica - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom + Podomejen očrt z<a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 prostostnimi stopnjami</span></a> - + Solved in %1 sec Rešeno v %1 s - + Unsolved (%1 sec) Ni rešeno (%1 s) @@ -4480,7 +4506,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Switches between showing and hiding the control polygons for all B-splines - Preklopi med prikazanimi in skritimi nadzornimi poligoni za vse B-zlepke + Preklopi med prikazanimi in skritimi nadzornimi mnogokotniki za vse B-zlepke @@ -4513,8 +4539,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Pritrdi premer krožnice ali krožnega loka @@ -4522,8 +4548,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Pritrdi polmer kroga ali loka @@ -4540,8 +4566,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Ustvari lok s končnima točkama in točko na njem @@ -4549,8 +4575,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Ustvari krog s tremi točkami na obodu @@ -4558,8 +4584,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Ustvari lok s središčem in končnima točkama @@ -4567,8 +4593,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Ustvari eliptični lok s središčem, velikim polmerom in končnima točkama @@ -4576,8 +4602,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Ustvari lok hiperbole s središčem, velikim polmerom in končnima točkama @@ -4585,8 +4611,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Ustvari lok parabole z goriščem, temenom in končnima točkama @@ -4594,13 +4620,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-zlepek s kontrolnimi točkami - - + + Create a B-spline by control points Ustvari B-zlepek s kontrolnimi točkami @@ -4608,8 +4634,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Ustvari krog s središčem in točko na obodu @@ -4617,8 +4643,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Ustvari elipso z periapsido, apoapsido in malim polmerom @@ -4626,8 +4652,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Ustvari elipso s središčem, velikim polmerom in točko @@ -4635,8 +4661,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Ustvari sedemkotnik s središčem in enim ogliščem @@ -4644,8 +4670,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Ustvari šestkotnik s središčem in enim ogliščem @@ -4653,23 +4679,23 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Ustvari osemkotnik s središčem in enim ogliščem - - + + Create a regular polygon by its center and by one corner - Ustvari pravilen večkotnik s središčem in enim ogliščem + Ustvari pravilni večkotnik z določitvijo središča in enega oglišča Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Ustvari petkotnik s središčem in enim ogliščem @@ -4677,8 +4703,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Ustvari kvadrat s središčem in enim ogliščem @@ -4686,8 +4712,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Ustvari enakostranični trikotnik s središčem in enim ogliščem @@ -4695,13 +4721,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodični B-zlepek s kontrolnimi točkami - - + + Create a periodic B-spline by control points Ustvari periodični B-zlepek s kontrolnimi točkami @@ -4955,9 +4981,9 @@ BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm.During diagnosing the QR rank of matrix is calculated. Eigen Dense QR is a dense matrix QR with full pivoting; usually slower Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster - During diagnosing the QR rank of matrix is calculated. -Eigen Dense QR is a dense matrix QR with full pivoting; usually slower -Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster + Med pregledovanjem se izračunava QR rang razpredelnica. +Eigen Dense QR je gosta QR razpredelnica s popolnim obračanje; običajno počasnejše +Eigen Sparse QR algoritem je optimiziran za redke razpredelnice; običajno hitrejše @@ -4967,7 +4993,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Solver used to determine whether a group is redundant or conflicting - Solver used to determine whether a group is redundant or conflicting + Reševalnik za ugotavljanje odvečnosti ali navzkrižnosti skupine @@ -5017,12 +5043,12 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Console debug mode: - Console debug mode: + Način razhroščevalne ukazne mize: Verbosity of console output - Verbosity of console output + Podrobnost izhoda ukazne mize @@ -5053,8 +5079,8 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Threshold for squared error that is used to determine whether a solution converges or not - Threshold for squared error that is used -to determine whether a solution converges or not + Prag pri kvadratni napaki, ki se uporablja +za določitev, ali se rešitve prbližujejo ali ne @@ -5094,7 +5120,7 @@ to determine whether a solution converges or not During a QR, values under the pivot threshold are treated as zero - During a QR, values under the pivot threshold are treated as zero + Vrednosti pod pragom vrtenja se med QR-jem obravnavajo kot ničte diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm index 78d1b5c6d9..2dfe2f803b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts index 0b55cb3bef..ff00be2ec9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Ограничи полупречник - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Нацртај лук у cкицеру - + Center and end points Центар и крајње тачке - + End points and rim point Крајње тачке и тачка на ободу @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Нацртај круг - + Create a circle in the sketcher Нацртај круг у cкицеру - + Center and rim point Центар и тачка на ободу - + 3 rim points 3 тачке на ободу @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Креирај конуcни - + Create a conic in the sketch Create a conic in the sketch - + Ellipse by center, major radius, point Ellipse by center, major radius, point - + Ellipse by Periapsis, apoapsis, minor radius Ellipse by Periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Направи правилни многоугао - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Троугао - + Square Квадрат - + Pentagon Петоугао - + Hexagon Шестоугао - + Heptagon Седмоугао - + Octagon Осмоугао - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Ограничи угао - + Fix the angle of a line or the angle between two lines Фикcирај угао линије,или угао између две линије @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Constrain coincident - + Create a coincident constraint on the selected item Create a coincident constraint on the selected item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Ограничи удаљеноcт - + Fix a length of a line or the distance between a line and a vertex Fix a length of a line or the distance between a line and a vertex @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Фикcирај хоризонталну удаљеноcт између две тачке,или крајеве линија @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Фикcирај вертикалну удаљеноcт између две тачке,или крајеве линија @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Ограничи једнако - + Create an equality constraint between two lines or between circles and arcs Направи ограничење једнакоcти између две линије,или између кругова и лукова @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Ограничи хоризонтално - + Create a horizontal constraint on the selected item Направи хоризонтално ограничење на изабраном предмету @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Constrain lock - + Create a lock constraint on the selected item Направи закључано ограничење на изабраном предмету @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Ограничи паралелно - + Create a parallel constraint between two lines Направи паралелно ограничење између две линије @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Ограничи вертикално - + Create a perpendicular constraint between two lines Направи вертикално ограничење између две линије @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Ограничи тачку на објекат - + Fix a point onto an object Фикcирај тачку на објекат @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Ограничи полупречник - + Fix the radius of a circle or an arc Фиксирај полупречник круга,или лука @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Ограничи cиметрично - + Create a symmetry constraint between two points with respect to a line or a third point Направи cиметрично ограничење између две тачке у одноcу cа линијом,или трећом тачком @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Ограничи тангентно - + Create a tangent constraint between two entities Направи тангентно ограничење између два ентитета @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Ограничи вертикално - + Create a vertical constraint on the selected item Направи вертикално ограничење на изабраном предмету @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Нацртај лук cа три тачке - + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Нацртај круг cа три тачке - + Create a circle by 3 perimeter points Направи круг из 3 опcежне тачке @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Направи лук из центра - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Направи лук од елипcе - + Create an arc of ellipse in the sketch Направи лук од елипcе у cкици @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Креирај лук хиперболе - + Create an arc of hyperbola in the sketch Креирај лук хиперболе на скици @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Креирај лук параболе - + Create an arc of parabola in the sketch Креирај лук параболе на скици @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Нацртај круг - + Create a circle in the sketch Нацртај круг у cкици @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Create draft line - + Create a draft line in the sketch Направи нацрт линију у cкици @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Направи елипcу из 3 тачке - + Create an ellipse by 3 points in the sketch Направи елипcу из 3 тачке у cкици @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Направи елипcу из центра - + Create an ellipse by center in the sketch Направи елипcу из центра у cкици @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Направи заобљење - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Направи хептагон - + Create a heptagon in the sketch Направи хептагон у cкици @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Направи хекcагон - + Create a hexagon in the sketch Направи хекcагон у cкици @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Нацртај линију - + Create a line in the sketch Нацртај линију на cкици @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Направи осмоугао - + Create an octagon in the sketch Направи осмоугао на cкици @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Нацртај петоугао - + Create a pentagon in the sketch Нацртај петоугао на cкици @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Креирај тачку - + Create a point in the sketch Креирај тачку на cкици @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Направи полилинију - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Направи правоугаоник - + Create a rectangle in the sketch Направи правоугаоник на cкици @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Направи правилни многоугао - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Create slot - + Create a slot in the sketch Create a slot in the sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Направи квадрат - + Create a square in the sketch Направи квадрат на cкици @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Направи текcт - + Create text in the sketch Направи текcт на cкици @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Направи једнакоcтранични троугао - + Create an equilateral triangle in the sketch Направи једнакоcтранични троугао на cкици @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Спољна геометрија - + Create an edge linked to an external geometry Креирај руб повезан cа cпољном геометријом @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode Toggles the toolbar or selected constraints to/from reference mode @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Cкрати руб - + Trim an edge with respect to the picked position Trim an edge with respect to the picked position @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Изабери ивицу(е) из cкице. - - - - + + + + Dimensional constraint Димензионално ограничење @@ -2232,273 +2232,273 @@ Једно од одабраног мора бити на cкици - - + + Select an edge from the sketch. Изабери ивицу из cкице. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Немогуће ограничење - - - - + + + + The selected edge is not a line segment Одабрани руб није cегмент линије - - - - - - + + + + + + Double constraint Дупло ограничење - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! Одабране cтавке(а) не могу прихватити хоризонтално ограничење! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Одабране cтавке(а) не могу прихватити вертикално ограничење! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Грешка - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Select vertexes from the sketch. - - + + Select exactly one line or one point and one line or two points from the sketch. Одаберите тачно једну линију, или једну тачку и једну линију, или две тачке из cкице. - + Cannot add a length constraint on an axis! Не можете додати ограничење дужине на оcи! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. Одабери тачно једну линију, или до две тачке из cкице. - + Cannot add a horizontal length constraint on an axis! Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Одаберите две,или више линија из скице. - - + + Select at least two lines from the sketch. Одабери најмање две линије из cкице. - + Select a valid line Одабери важећу линију - - + + The selected edge is not a valid line Одабрани руб није важећа линија - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Прихватљиве комбинације: две криве; крјња тачка и крива; две крајње тачке; две криве и тачка. - + Select some geometry from the sketch. perpendicular constraint Одабери неку геометрију из cкице. - + Wrong number of selected objects! perpendicular constraint Погрешан број одабраних објеката! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Cа 3 објекта,морају поcтојати 2 криве и 1 тачка. - - + + Cannot add a perpendicularity constraint at an unconnected point! Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. Један од одабраних рубова би требао бити линија. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Одабери неку геометрију из cкице. - + Wrong number of selected objects! tangent constraint Погрешан број одабраних објеката! - - - + + + Cannot add a tangency constraint at an unconnected point! Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Одабери један, или више лукова,или кругова из cкице. - - + + Constrain equal Ограничи једнако - + Do you want to share the same radius for all selected elements? Да ли желите иcти полупречник за cве одабране елементе? - - + + Constraint only applies to arcs or circles. Ограничење се односи само на лукове и кружнице. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Одабери једну, или две линије из cкице. Или одабери два руба и тачку. - - + + Parallel lines Паралелне линије - - + + An angle constraint cannot be set for two parallel lines. Ограничење угла cе не може поcтавити на две паралелне линије. - + Cannot add an angle constraint on an axis! Не можете додати угаоно ограничење на осу! - + Select two edges from the sketch. Одабери два руба из cкице. - - + + Select two or more compatible edges Одаберите два,или више компатибилних рубова - + Sketch axes cannot be used in equality constraints Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Одаберите два, или више рубова cличног типа - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Одабрани објекти ниcу cамо геометрија из једне cкице. - + Number of selected objects is not 3 (is %1). Број одабрcних објеката није 3 (јеcте %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Одабрана је некомпатибилна геометрија! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Одаберите барем једну елипcу и један руб из cкице. - + Sketch axes cannot be used in internal alignment constraint Sketch axes cannot be used in internal alignment constraint - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Подржане cу макcимално 2 тачке. - - + + Maximum 2 lines are supported. Подржане cу макcимално 2 линије. - - + + Nothing to constrain Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements Додатни елементи - - - + + + More elements than possible for the given ellipse were provided. These were ignored. More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Одабери ограничење(а) из cкице. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Уметни полупречник - - + + Radius: Полупречник: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Унети пречник - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Дужина: - - + + Change radius Измени полупречник - - + + Change diameter Измени пречник - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Одноc n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Без имена @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher validation - + Invalid constraints Неважећа ограничења - - + + + Fix Фиксирај - - + + + Find Пронађи - + Delete constraints to external geom. Delete constraints to external geom. - + Missing coincidences Missing coincidences - + Tolerance: Tolerancija: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Активирај/Ажурирај - + Disable Онемогући @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Измени скицу - + A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака - + Do you want to close this dialog? Да ли желите да затворите овај дијалог? - + Invalid sketch Неважећа cкица - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Please remove the following constraint: - + Please remove at least one of the following constraints: Please remove at least one of the following constraints: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + Empty sketch Празна скица - + Over-constrained sketch Over-constrained sketch - - - + + + (click to select) (кликни да одабереш) - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Cкица cадржи cувишна ограничења - + Fully constrained sketch Потпуно ограничена скица - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Решено за %1 сек - + Unsolved (%1 sec) Неразрешено (%1 sec) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Фиксирај полупречник круга,или лука @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Create an arc of ellipse by its center, major radius, endpoints @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Create a circle by its center and by a rim point @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Create a heptagon by its center and by one corner @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Create a hexagon by its center and by one corner @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Create a pentagon by its center and by one corner @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Create a square by its center and by one corner @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Create an equilateral triangle by its center and by one corner @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm index 96576e7311..168e4335ed 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index 11ab7b7a05..f32c1f6903 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Skissare - + CarbonCopy Karbonkopia - + Copies the geometry of another sketch Kopierar geometrin från en annan skiss @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Skissare - + Constrain arc or circle Begränsa båge eller cirkel - + Constrain an arc or a circle Begränsa en båge eller cirkel - + Constrain radius Begränsa radie - + Constrain diameter Begränsa diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Skissare - + Create arc Skapa cirkelbåge - + Create an arc in the sketcher Skapa en båge i skissen - + Center and end points Centrum- och slutpunkter - + End points and rim point Slutpunkter och perifer punkt @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Skissare - + Create a B-spline Skapa B-spline - + Create a B-spline in the sketch Skapa en B-spline i skissen @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Skissare - + Create circle Skapa en cirkel - + Create a circle in the sketcher Skapa en cirkel i skissen - + Center and rim point Centrum- och perifer punkt - + 3 rim points tre kantpunkter @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Skissare - + Create a conic Skapa en konisk form - + Create a conic in the sketch Skapa en konisk form i skissen - + Ellipse by center, major radius, point Ellips utifrån centrumpunkt, storaxel och punkt - + Ellipse by Periapsis, apoapsis, minor radius Ellips utifrån periapsis, apoapsis och lillaxel - + Arc of ellipse by center, major radius, endpoints Elliptisk båge utifrån centrumpunkt, storaxel och slutpunkter - + Arc of hyperbola by center, major radius, endpoints Hyperbolisk båge från centrumpunkt, storaxel och slutpunkter - + Arc of parabola by focus, vertex, endpoints Parabelisk båge angiven med brännpunkt, hörnpunkt och slutpunkter @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Skissare - + Create regular polygon Skapa liksidig polygon - + Create a regular polygon in the sketcher Skapa en liksidig polygon i skissaren - + Triangle Triangel - + Square Kvadrat - + Pentagon Pentagon - + Hexagon Hexagon - + Heptagon Heptagon - + Octagon Oktogon - + Regular Polygon Liksidig polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Skissare - + Constrain angle Begränsa vinkel - + Fix the angle of a line or the angle between two lines Fixera en linjes vinkel eller vinkeln mellan två linjer @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Skissare - + Constrain Block Blockeringsbegränsning - + Create a Block constraint on the selected item Skapa en blockeringsbegränsning för den valda detaljen @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Skissare - + Constrain coincident Begränsa sammanfallande - + Create a coincident constraint on the selected item Skapa en sammanfallande begränsning för den markerade detaljen @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Skissare - + Constrain diameter Begränsa diameter - + Fix the diameter of a circle or an arc Fixera diametern av en cirkel eller en båge @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Skissare - + Constrain distance Begränsningsavstånd - + Fix a length of a line or the distance between a line and a vertex Fixera längden på en linje eller avståndet mellan en linje och ett hörn @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Skissare - + Constrain horizontal distance Begränsa horisontellt avstånd - + Fix the horizontal distance between two points or line ends Fixera det horisontella avståndet mellan två punkter eller linjeändar @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Skissare - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixera det vertikala avståndet mellan två punkter eller linjeändar @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Skissare - + Constrain equal Begränsa lika - + Create an equality constraint between two lines or between circles and arcs Skapa en jämlikhetsbegränsning mellan två linjer eller mellan cirklar och cirkelbågar @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Skissare - + Constrain horizontally Begränsa horisontellt - + Create a horizontal constraint on the selected item Skapa en horisontell begränsning på den valda detaljen @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skissare - + Constrain InternalAlignment Interninpassningsbegränsning - + Constrains an element to be aligned with the internal geometry of another element Begränsar ett element till att inpassas efter den inre geometrin av ett annat element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Skissare - + Constrain lock Begränsa lås - + Create a lock constraint on the selected item Skapa en lås begränsning för det markerade objektet @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Skissare - + Constrain parallel Begränsa parallellt - + Create a parallel constraint between two lines Skapa en parallell begränsning mellan två linjer @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Skissare - + Constrain perpendicular Begränsa vinkelrätt - + Create a perpendicular constraint between two lines Skapa en vinkelrät begränsning mellan två linjer @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skissare - + Constrain point onto object Begränsa punkt på objekt - + Fix a point onto an object Fixera en punkt på ett objekt @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Skissare - + Constrain radius Begränsa radie - + Fix the radius of a circle or an arc Fixera cirkelns eller cirkelbågens radie @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skissare - + Constrain refraction (Snell's law') Brytningsbegränsning (Snells lag) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Skapa en brytningsbegränsning (Snells lag) mellan två slutpunkter av strålar och en kant som ett gränssnitt. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Skissare - + Constrain symmetrical Begränsa symmetriskt - + Create a symmetry constraint between two points with respect to a line or a third point Skapa en symmetribegränsning mellan två punkter med avseende på en linje eller en tredje punkt @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Skissare - + Constrain tangent Begränsa tangens - + Create a tangent constraint between two entities Skapa en tangentbegränsning mellan två föremål @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Skissare - + Constrain vertically Begränsa vertikalt - + Create a vertical constraint on the selected item Skapa en vertikal begränsning på den markerade detaljen @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Skissare - + Create arc by three points Skapa båge utifrån tre punkter - + Create an arc by its end points and a point along the arc Skapa en båge utifrån dess slutpunkter och en punkt längs bågen @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Skissare - + Create circle by three points Skapa en cirkel utifrån tre punkter - + Create a circle by 3 perimeter points Skapa en cirkel utifrån tre perifera punkter @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Skissare - + Create arc by center Skapa båge utifrån centrumpunkt - + Create an arc by its center and by its end points Skapa en båge utifrån dess centrum- och slutpunkter @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Skissare - + Create an arc of ellipse Skapa en elliptisk båge - + Create an arc of ellipse in the sketch Skapa en elliptisk båge i skissen @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Skissare - + Create an arc of hyperbola Skapa en hyperbolisk båge - + Create an arc of hyperbola in the sketch Skapar en hyperblisk båge i skissen @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Skissare - + Create an arc of parabola Skapa en parabelisk båge - + Create an arc of parabola in the sketch Skapa en parabelisk båge i skissen @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Skissare - + Create B-spline Skapa B-spline - + Create a B-spline via control points in the sketch. Skapa en B-spline utifrån kontrollpunkter i skissen. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Skissare - + Create circle Skapa en cirkel - + Create a circle in the sketch Skapa en cirkel i skissen @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Skissare - + Create draft line Skapa ritlinje - + Create a draft line in the sketch Skapa ritlinje i skissen @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Skissare - + Create ellipse by 3 points Skapa ellips utifrån tre punkter - + Create an ellipse by 3 points in the sketch Skapa en ellips utifrån tre punkter i skissen @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Skissare - + Create ellipse by center Skapa ellips utifrån en centrumpunkt - + Create an ellipse by center in the sketch Skapa en ellips utifrån en centrumpunkt i skissen @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Skissare - + Create fillet Skapa avrundning - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Skissare - + Create heptagon Skapa heptagon - + Create a heptagon in the sketch Skapa en heptagon i skissen @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Skissare - + Create hexagon Skapa hexagon - + Create a hexagon in the sketch Skapa en hexagon i skissen @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Skissare - + Create line Skapa linje - + Create a line in the sketch Skapa en linje i skissen @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Skissare - + Create octagon Skapa oktagon - + Create an octagon in the sketch Skapa en oktagon i skissen @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Skissare - + Create pentagon Skapa pentagon - + Create a pentagon in the sketch Skapa en pentagon i skissen @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Skissare - + Create periodic B-spline Skapa periodisk B-spline - + Create a periodic B-spline via control points in the sketch. Skapa en periodisk B-spline utifrån kontrollpunkter i skissen. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Skissare - + Create point Skapa punkt - + Create a point in the sketch Skapa en punkt i skissen @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Skissare - + Create polyline Skapa polylinje - + Create a polyline in the sketch. 'M' Key cycles behaviour Skapa en polylinje i skissen. 'M'-knappen växlar beteende @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Skissare - + Create rectangle Skapa rektangel - + Create a rectangle in the sketch Skapa en rektangel i skissen @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Skissare - + Create regular polygon Skapa liksidig polygon - + Create a regular polygon in the sketch Skapa en regelbunden polygon i skissen @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Skissare - + Create slot Skapa skåra - + Create a slot in the sketch Skapa en skåra i skissen @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Skissare - + Create square Skapa kvadrat - + Create a square in the sketch Skapa en kvadrat i skissen @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Skissare - + Create text Skapa text - + Create text in the sketch Skapa text i skissen @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Skissare - + Create equilateral triangle Skapa liksidig triangel - + Create an equilateral triangle in the sketch Skapa en liksidig triangel i skissen @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Skissare - + Extend edge Förläng kant - + Extend an edge with respect to the picked position Förlänger en kant med avseende till den valda positionen @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Skissare - + External geometry Extern geometri - + Create an edge linked to an external geometry Skapa en kant länkad till en extern geometri @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Skissare - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Skissare - + Toggle reference/driving constraint Växla referens-/drivningsbegränsning - + Toggles the toolbar or selected constraints to/from reference mode Växlar verktygsfältet eller valda begränsningar till/från referensläge @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Skissare - + Trim edge Trimma kant - + Trim an edge with respect to the picked position Trimma en kant i förhållande till den markerade positionen @@ -1952,47 +1952,47 @@ Auto-begränsningsfel: Olösbar skiss efter tillämpning av likhetsbegränsningar. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Kan inte finna mötespunkter för kurvorna. Försök att lägga till sammanfallaningsbegränsningar mellan kurvorna du vill använda. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Denna version av OCE/OCC stöder inte knutfunktioner. Version 6.9.0 eller högre krävs. - + BSpline Geometry Index (GeoID) is out of bounds. B-spline-geometriindex (GeoID) är inte giltigt. - + You are requesting no change in knot multiplicity. Du efterfrågar ingen ändring i knutmultipliciteten. - + The Geometry Index (GeoId) provided is not a B-spline curve. Geometriindex (GeoId) som är angivet är inte en B-spline-kurva. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Knutindex är inte giltigt. Notera att i enlighet med OCC-notation så har första knuten index 1 och inte index 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Multipliciteten kan inte ökas mer än graden av B-spline:n. - + The multiplicity cannot be decreased beyond zero. Multipliciteten kan inte minskas under 0. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC kan inte minsta multipliciteten inom den maximala toleransen. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Välj kant(er) från skissen. - - - - + + + + Dimensional constraint Dimensionell begränsning @@ -2232,273 +2232,273 @@ En av de valda måste finnas på skissen - - + + Select an edge from the sketch. Välj en kant från skissen. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Omöjlig begränsning - - - - + + + + The selected edge is not a line segment Den valda kanten är inte ett linjesegment - - - - - - + + + + + + Double constraint Dubbelbegränsning - - - - + + + + The selected edge already has a horizontal constraint! Den valda kanten har redan en horisontell begränsning! - - - - + + + + The selected edge already has a vertical constraint! Den valda kanten har redan en vertikal begränsning! - - - - - - + + + + + + The selected edge already has a Block constraint! Den valda kanten har redan en blockeringsbegränsning! - + The selected item(s) can't accept a horizontal constraint! Markerade objekt kan inte acceptera en horisontell begränsning! - + There are more than one fixed point selected. Select a maximum of one fixed point! Mer än en fast punkt är vald. Välj högst en fast punkt! - + The selected item(s) can't accept a vertical constraint! Markerade objekt kan inte acceptera en vertikal begränsning! - + There are more than one fixed points selected. Select a maximum of one fixed point! Mer än en fast punkt är vald. Välj högst en fast punkt! - - + + Select vertices from the sketch. Välj hörnpunkter från skissen. - + Select one vertex from the sketch other than the origin. Välj en hörnpunkt från skissen som inte är origo. - + Select only vertices from the sketch. The last selected vertex may be the origin. Välj endast hörnpunkter från skissen. Den sist valda hörnpunkten kan vara origo. - + Wrong solver status Ogiltig status från problemlösaren - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. En blockeringsbegränsning kan inte läggas till om skissen är olöst eller om det finns överflödiga och/eller motstridiga begränsningar. - + Select one edge from the sketch. Välj en kant i skissen. - + Select only edges from the sketch. Välj endast kanter i skissen. - - - - - - - + + + + + + + Error Fel - + Select two or more points from the sketch. Välj två eller fler punkter från skissen. - - + + Select two or more vertexes from the sketch. Markera två eller flera hörnpunkter från skissen. - - + + Constraint Substitution Begränsningsersättning - + Endpoint to endpoint tangency was applied instead. Slutpunkt till slutpunkt-tangering tillämpades istället. - + Select vertexes from the sketch. Välj hörnen från skissen. - - + + Select exactly one line or one point and one line or two points from the sketch. Välj exakt en linje eller en punkt och en linje eller två punkter från skissen. - + Cannot add a length constraint on an axis! Kan inte lägga till längdbegränsning på en axel! - + This constraint does not make sense for non-linear curves Den här begränsningen har ingen mening för icke-linjära kurvor - - - - - - + + + + + + Select the right things from the sketch. Välj de rätta sakerna från skissen. - - + + Point on B-spline edge currently unsupported. Punkt på B-spline-kant stöds inte just nu. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ingen av de valda punkterna begränsades till de respektive kurvorna, antingen för att de är delar av samma element eller för att båda är yttre geometri. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Välj antingen en punkt och flera kurvor, eller en kurva och flera punkter. Du har valt %1 kurvor och %2 punkter. - - - - + + + + Select exactly one line or up to two points from the sketch. Välj exakt en linje eller upp till två punkter från skissen. - + Cannot add a horizontal length constraint on an axis! Kan inte lägga till en horisontell längdbegränsning på en axel! - + Cannot add a fixed x-coordinate constraint on the origin point! Kan inte lägga till en fast x-koordinatsbegränsning på origo! - - + + This constraint only makes sense on a line segment or a pair of points Den här begränsningen har bara mening på ett linjesegment eller par av punkter - + Cannot add a vertical length constraint on an axis! Kan inte lägga till en vertikal längdbegränsning på en axel! - + Cannot add a fixed y-coordinate constraint on the origin point! Kan inte lägga till en fast y-koordinatsbegränsning på origo! - + Select two or more lines from the sketch. Välj två eller flera linjer från skissen. - - + + Select at least two lines from the sketch. Välj åtminstone två linjer från skissen. - + Select a valid line Välj en giltig linje - - + + The selected edge is not a valid line Den valda kanten är inte en giltig linje - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunkter; två kurvor och en punkt. - + Select some geometry from the sketch. perpendicular constraint Välj geometri(er) från skissen. - + Wrong number of selected objects! perpendicular constraint Felaktigt antal valda objekt! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Med tre objekt måste det vara två kurvor och en punkt. - - + + Cannot add a perpendicularity constraint at an unconnected point! Kan inte lägga till en vinkelräthetsbegränsning vid en oansluten punkt! - - - + + + Perpendicular to B-spline edge currently unsupported. Normal till en B-spline-kant stöds inte just nu. - - + + One of the selected edges should be a line. En av de markerade kanterna ska vara en linje. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunkter; två kurvor och en punkt. - + Select some geometry from the sketch. tangent constraint Välj geometri(er) från skissen. - + Wrong number of selected objects! tangent constraint Felaktigt antal valda objekt! - - - + + + Cannot add a tangency constraint at an unconnected point! Kan inte lägga till ett tangensbegränsning vid en oansluten punkt! - - - + + + Tangency to B-spline edge currently unsupported. Tangering till B-spline-kant stöds inte just nu. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Slutpunkt till slutpunkt-tangering tillämpades. Sammanfallningsbegränsningen raderades. - - - - + + + + Select one or more arcs or circles from the sketch. Markera en eller fler bågar eller cirklar från skissen. - - + + Constrain equal Begränsa lika - + Do you want to share the same radius for all selected elements? Vill du dela samma radie för alla valda element? - - + + Constraint only applies to arcs or circles. Begränsning tillämpas bara på bågar eller cirklar. - + Do you want to share the same diameter for all selected elements? Vill du dela samma diameter för alla valda element? - - + + Select one or two lines from the sketch. Or select two edges and a point. Välj en eller två linjer från skissen, eller två kanter och en punkt. - - + + Parallel lines Parallella linjer - - + + An angle constraint cannot be set for two parallel lines. En vinkelbegränsning kan inte tillämpas på två parallella linjer. - + Cannot add an angle constraint on an axis! Kan inte lägga till vinkelbegränsning på en axel! - + Select two edges from the sketch. Välj två kanter från skissen. - - + + Select two or more compatible edges Markera två eller flera kompatibla kanter - + Sketch axes cannot be used in equality constraints Skissaxlar kan inte användas i likhetsbegränsningar - + Equality for B-spline edge currently unsupported. Likhet för B-spline-kant stöds inte just nu. - - + + Select two or more edges of similar type Markera två eller flera kanter av liknande typ - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Välj två punkter och en symmetrilinje, två punkter och en symmetripunkt eller en linje och en symmetripunkt från skissen. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Kan inte lägga till symmetribegränsning mellan en linje och dess ändpunkter! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Välj två slutpunkter från linjer som fungerar som strålar, och en kant som representerar en gräns. Den först valda punkten motsvarar index n1, den andra index n2, och referensvärdet anger förhållandet n2/n1. - + Selected objects are not just geometry from one sketch. Valda objekt är inte geometri från endast en skiss. - + Number of selected objects is not 3 (is %1). Antal valda objekt är inte tre (antal: %1). - + Cannot create constraint with external geometry only!! Kan inte skapa begränsning med enbart yttre geometri!! - + Incompatible geometry is selected! Inkompatibel geometri vald! - + SnellsLaw on B-spline edge currently unsupported. Snells lag på B-spline-kant stöds inte just nu. - - + + Select at least one ellipse and one edge from the sketch. Välj minst en ellips och en kant från skissen. - + Sketch axes cannot be used in internal alignment constraint Axlarna i skissen kan inte användas till intern inpassningsbegränsning - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Du kan inte internt begränsa en ellips på en annan ellips. Välj enbart en ellips. - - + + Maximum 2 points are supported. Maximalt två punkter stöds. - - + + Maximum 2 lines are supported. Maximalt två linjer stöds. - - + + Nothing to constrain Inget att begränsa - + Currently all internal geometry of the ellipse is already exposed. Just nu är all inre geometri hos ellipsen redan synlig. - - - - + + + + Extra elements Extra element - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Fler element än möjligt försågs till den angivna ellipsen. Dessa ignorerades. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Du kan inte internt begränsa en elliptisk båge på en annan elliptisk båge. Välj endast en elliptisk båge. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Du kan inte internt begränsa en ellips på en elliptisk båge. Välj enbart en ellips eller elliptisk båge. - + Currently all internal geometry of the arc of ellipse is already exposed. Just nu är all inre geometri hos den elliptiska bågen redan synlig. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Fler element än möjligt försågs till den angivna elliptiska bågen. Dessa ignorerades. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Just nu stöds endast inre geometri för ellipser och elliptiska bågar. Det senast valda elementet måste vara en ellips eller en elliptisk båge. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Välj begränsning(ar) från skissen. - + CAD Kernel Error CAD-kärnfel @@ -2941,42 +2941,42 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Karbonkopia skulle orsaka ett cirkelberoende. - + This object is in another document. Det här objektet är i ett annat dokument. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Det här objektet tillhör en annan kropp. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Den markerade skissen är inte parallell till den här skissen. Håll in CTRL+ALT för att tillåta ickeparallella skisser. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. XY-axlarna i den valda skissen har inte samma riktning som denna skiss. Håll in CTRL+ALT för bortse från detta. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Origo i den valda skissen är inte justerad mot origo i den här skissen. Håll in CTRL+ALT för att bortse från detta. @@ -3062,8 +3062,8 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Infoga radie - - + + Radius: Radie: @@ -3074,8 +3074,8 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Infoga diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Längd: - - + + Change radius Ändra radie - - + + Change diameter Ändra diameter - + Refractive index ratio Brytningsindexsförhållande - + Ratio n2/n1: Förhållande n2/n1: @@ -3136,22 +3136,22 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Att länka detta kommer orsaka ett cirkelberoende. - + This object is in another document. Det här objektet är i ett annat dokument. - + This object belongs to another body, can't link. Det här objektet tillhör en annan kropp, kan inte länka. - + This object belongs to another part, can't link. Det här objektet tillhör en annan kropp, kan inte länka. @@ -3192,8 +3192,8 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk SketcherGui::PropertyConstraintListItem - - + + Unnamed Namnlös @@ -3912,6 +3912,26 @@ Inga begränsningar länkade till slutpunkterna hittades däremot. All constraints that deal with external geometry were deleted. Alla begränsningar som hanterar yttre geometri raderades. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Skissvalidering - + Invalid constraints Ogiltiga begränsningar - - + + + Fix Fixa - - + + + Find Hitta - + Delete constraints to external geom. Radera begränsningar till yttre geometri. - + Missing coincidences Saknade sammanfallningar - + Tolerance: Tolerans: - + Highlight open vertexes Framhäv öppna hörnpunkter - + Ignore construction geometry Ignorera konstruktionsgeometri + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Omvänd yttre geometri - + Swap endpoints in constraints Kasta om slutpunkter i begränsningar - + Constraint orientation locking Lås begränsningsriktning - + Enable/Update Aktivera/uppdatera - + Disable Avaktivera @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Redigera skiss - + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - + Do you want to close this dialog? Vill du stänga denna dialogruta? - + Invalid sketch Ogiltig skiss - + Do you want to open the sketch validation tool? Vill du öppna verktyget för skissvalidering? - + The sketch is invalid and cannot be edited. Skissen är ogiltig och kan inte redigeras. - + Please remove the following constraint: Ta bort följande begränsning: - + Please remove at least one of the following constraints: Ta bort minst en av följande begränsningar: - + Please remove the following redundant constraint: Ta bort följande redundanta begränsningen: - + Please remove the following redundant constraints: Ta bort följande redundanta begränsningarna: - + Empty sketch Tom skiss - + Over-constrained sketch Överbegränsad skiss - - - + + + (click to select) (Klicka för att välja) - + Sketch contains conflicting constraints Skissen innehåller motstridiga begränsningar - + Sketch contains redundant constraints Skissen innehåller överflödiga begränsningar - + Fully constrained sketch Helt begränsad skiss - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Löst i %1 SEK - + Unsolved (%1 sec) Olöst (%1 SEK) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixera diametern av en cirkel eller en båge @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixera cirkelns eller cirkelbågens radie @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Skapa en båge utifrån dess slutpunkter och en punkt längs bågen @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Skapa en cirkel från tre perifera punkter @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Skapa en båge utifrån dess centrum- och slutpunkter @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Skapa en elliptisk båge utifrån mittpunkt, storaxel och slutpunkter @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Skapa en hyperbolisk båge utifrån mittpunkt, storaxel och slutpunkter @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Skapa en parabel-båge utifrån brännpunkt, hörnpunkt och slutpunkter @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline utifrån kontrollpunkter - - + + Create a B-spline by control points Skapa en B-spline utifrån kontrollpunkter @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Skapa en cirkel utifrån dess centrumpunkt och en kantpunkt @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Skapa en ellips utifrån periapsis, apoapsis och lillaxel @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Skapa en ellips utifrån centrumpunkt, storaxel och punkt @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Skapa en heptagon utifrån dess centrumpunkt och ett hörn @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Skapa en hexagon utifrån dess centrumpunkt och ett hörn @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Skapa en oktogon utifrån dess centrumpunkt och ett hörn - - + + Create a regular polygon by its center and by one corner Skapa en regelbunden polygon utifrån dess centrumpunkt och ett hörn @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Skapa en pentagon utifrån dess centrumpunkt och ett hörn @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Skapa en kvadrat utifrån dess mittpunkt och ett hörn @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Skapa en liksidig triangel utifrån dess centrumpunkt och ett hörn @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodisk B-spline utifrån kontrollpunkter - - + + Create a periodic B-spline by control points Skapa en periodisk B-spline utifrån kontrollpunkter diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm index 32ecf10580..2860255ecd 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 2c4969da70..0524630115 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Taslakçı - + CarbonCopy KarbonKopya - + Copies the geometry of another sketch Başka bir eskizin geometrisini kopyalar @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Taslakçı - + Constrain arc or circle Yay ya da çemberi kısıtla - + Constrain an arc or a circle Bir yayı ya da bir çemberi kısıtla - + Constrain radius Yarıçapı sınırla - + Constrain diameter Çapı sınırla @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Taslakçı - + Create arc Yay oluştur - + Create an arc in the sketcher Sketcher içinde bir yay oluştur - + Center and end points Merkez ve bitiş noktaları - + End points and rim point Son noktalar ve kenar noktası @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Taslakçı - + Create a B-spline B-spline'ı yarat - + Create a B-spline in the sketch Eskizde bir B-spline oluşturun @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Taslakçı - + Create circle Çember oluştur - + Create a circle in the sketcher Sketcher içinde bir çember oluştur - + Center and rim point Merkez ve bitiş noktaları - + 3 rim points 3 kenar noktası @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Taslakçı - + Create a conic Bir Konik oluştur - + Create a conic in the sketch Eskizde bir koni oluşturun - + Ellipse by center, major radius, point Elipse by center, büyük yarıçap, nokta - + Ellipse by Periapsis, apoapsis, minor radius Periapsis ile Elips, apoapsis, minör radius - + Arc of ellipse by center, major radius, endpoints Merkezin elips çizgisi, büyük yarıçap, uç noktalar - + Arc of hyperbola by center, major radius, endpoints Hiperbola merkezin, büyük yarıçapın ve bitiş noktalarının yayı - + Arc of parabola by focus, vertex, endpoints Odak, köşe, bitiş noktaları ile parabolün yayı @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Taslakçı - + Create regular polygon Düzenli çokgen oluşturma - + Create a regular polygon in the sketcher Sketcher içinde bir düzenli çokgen oluşturun - + Triangle Üçgen - + Square Kare - + Pentagon Beşgen - + Hexagon Altıgen - + Heptagon Yedigen - + Octagon Sekizgen - + Regular Polygon Düzenli Poligon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Taslakçı - + Constrain angle Açı sınırlandır - + Fix the angle of a line or the angle between two lines Bir çizginin açısını veya iki çizgi arasındaki açıyı düzeltin @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Taslakçı - + Constrain Block Kısıtlama Bloğu - + Create a Block constraint on the selected item Seçili öğe üzerinde bir blok kısıtlaması oluşturma @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Taslakçı - + Constrain coincident Tesadüfen Teslimatı bozma - + Create a coincident constraint on the selected item Seçili öğede bir çakışık sınırlama oluştur @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Taslakçı - + Constrain diameter Çapı sınırla - + Fix the diameter of a circle or an arc Bir çemberin veya bir yayın yarıçapını düzelt @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Taslakçı - + Constrain distance Sınır mesafesini sınırla - + Fix a length of a line or the distance between a line and a vertex Bir çizgi uzunluğunu veya bir çizgi ile bir köşe arasındaki mesafeyi düzeltin @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Taslakçı - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends İki nokta veya çizgi ucu arasındaki yatay mesafeyi düzeltin @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Taslakçı - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends İki nokta veya çizgi ucu arasındaki dikey mesafeyi düzeltin @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Taslakçı - + Constrain equal Eşit tutmak - + Create an equality constraint between two lines or between circles and arcs İki satır arasında veya daireler ve yaylar arasında eşitlik sınırlaması oluşturun @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Taslakçı - + Constrain horizontally Yatay olarak sınırlama - + Create a horizontal constraint on the selected item Seçili öğede yatay bir sınırlama oluştur @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Taslakçı - + Constrain InternalAlignment Dahili Yerleşimi Kısıtla - + Constrains an element to be aligned with the internal geometry of another element Başka bir öğenin iç geometrisiyle hizalanacak bir öğeyi sınırlandırır @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Taslakçı - + Constrain lock Sınır kilidi - + Create a lock constraint on the selected item Seçili öğede bir kilit kısıtlaması oluştur @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Taslakçı - + Constrain parallel Paralel sınırlandır - + Create a parallel constraint between two lines İki satır arasında paralel sınırlama oluşturun @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Taslakçı - + Constrain perpendicular Dikey sıkıştır - + Create a perpendicular constraint between two lines İki satır arasında dikey bir sınır oluşturun @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Taslakçı - + Constrain point onto object Nesneye noktayı sınırlama - + Fix a point onto an object Teğetsel sınırlama oluştur @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Taslakçı - + Constrain radius Yarıçapı sınırla - + Fix the radius of a circle or an arc Bir dairenin veya bir yayın yarıçapını düzeltme @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Taslakçı - + Constrain refraction (Snell's law') Kırılmayı sınırlayın (Snell yasası ') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Işınların iki uç noktası ile bir arayüz olarak kenar arasında bir kırılma yasası (Snell yasası) kısıtı oluşturun. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Taslakçı - + Constrain symmetrical Simetrik sınırlama - + Create a symmetry constraint between two points with respect to a line or a third point Bir çizgiyle veya bir üçüncü noktaya göre iki nokta arasında bir simetri kısıtı oluşturun @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Taslakçı - + Constrain tangent Tanjantı sınırla - + Create a tangent constraint between two entities İki öğe arasında teğet kısıtlama oluşturun @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Taslakçı - + Constrain vertically Dikey olarak sınırlama - + Create a vertical constraint on the selected item Seçilen öğeye dikey kısıt oluşturma @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Taslakçı - + Create arc by three points Yay üç nokta ile oluştur - + Create an arc by its end points and a point along the arc Uç noktaları ve yay boyunca bir nokta ile bir yay oluşturma @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Taslakçı - + Create circle by three points Üç noktayla daire oluştur - + Create a circle by 3 perimeter points 3 çevre noktası ile bir daire oluşturun @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Taslakçı - + Create arc by center Yay merkezince yarat - + Create an arc by its center and by its end points Merkezine ve bitiş noktalarına göre bir yay oluşturma @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Taslakçı - + Create an arc of ellipse Elips yayını oluşturma - + Create an arc of ellipse in the sketch Eskizde bir elips yayı oluştur @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Taslakçı - + Create an arc of hyperbola Hiperbolu yay oluştur - + Create an arc of hyperbola in the sketch Eskizde bir hiperbol yayı oluştur @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Taslakçı - + Create an arc of parabola Parabolün yay oluşturun - + Create an arc of parabola in the sketch Eskizde bir parabol yayı oluştur @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Taslakçı - + Create B-spline B-spline'ı yarat - + Create a B-spline via control points in the sketch. Eskizdeki kontrol noktaları üzerinden bir B-spline oluştur. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Taslakçı - + Create circle Çember oluştur - + Create a circle in the sketch Eskizde bir çember oluştur @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Taslakçı - + Create draft line Taslak bir doğru oluştur - + Create a draft line in the sketch Eskizde bir taslak çizgisi oluştur @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Taslakçı - + Create ellipse by 3 points - Elipsini 3 puanla oluştur + 3 noktalı elips oluşturun - + Create an ellipse by 3 points in the sketch Eskizde 3 noktadan geçen bir elips oluştur @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Taslakçı - + Create ellipse by center Ortasına göre elips oluştur - + Create an ellipse by center in the sketch Eskizde merkez temelli bir elips oluştur @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Taslakçı - + Create fillet Fileto oluştur - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Taslakçı - + Create heptagon Yedigen oluştur - + Create a heptagon in the sketch Eskizde bir yedigen oluştur @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Taslakçı - + Create hexagon Altıgen oluştur - + Create a hexagon in the sketch Eskizde bir altıgen oluşturun @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Taslakçı - + Create line Doğru oluştur - + Create a line in the sketch Eskizde bir çizgi oluştur @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Taslakçı - + Create octagon Sekizgen oluştur - + Create an octagon in the sketch Eskizde sekizgen oluşturun @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Taslakçı - + Create pentagon Beşgen oluştur - + Create a pentagon in the sketch Eskizde bir beşgen oluşturun @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Taslakçı - + Create periodic B-spline Eskizde bir beşgen oluşturun - + Create a periodic B-spline via control points in the sketch. Eskizdeki kontrol noktaları aracılığıyla periyodik bir B-spline oluştur. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Taslakçı - + Create point Nokta oluştur - + Create a point in the sketch Eskizde bir nokta oluştur @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Taslakçı - + Create polyline Çoklu doğru oluştur - + Create a polyline in the sketch. 'M' Key cycles behaviour Eskizde bir çokluçizgi oluştur. 'M' tuşu davranış dönüşümlerini ayarlar @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Taslakçı - + Create rectangle Kare oluştur - + Create a rectangle in the sketch Eskizde bir dikdörtgen oluştur @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Taslakçı - + Create regular polygon Düzenli çokgen oluşturma - + Create a regular polygon in the sketch Eskizde düzenli bir çokgen oluştur @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Taslakçı - + Create slot Yuva oluştur - + Create a slot in the sketch Eskizde bir yarık oluştur @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Taslakçı - + Create square Kare oluştur - + Create a square in the sketch Eskizde bir kare oluştur @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Taslakçı - + Create text Yazı oluştur - + Create text in the sketch Eskizde bir Metin oluştur @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Taslakçı - + Create equilateral triangle Eşkenar üçgen oluştur - + Create an equilateral triangle in the sketch Eskizde bir eşkenar üçgen oluşturun @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Taslakçı - + Extend edge Kenarı uzat - + Extend an edge with respect to the picked position Bir kenarı seçilen konuma göre uzatın @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Taslakçı - + External geometry Dış geometri - + Create an edge linked to an external geometry Harici bir geometriye bağlı bir kenar oluştur @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Taslakçı - + Toggle activate/deactivate constraint Etkinleştir/devre dışı bırak kısıtlamasını değiştir - + Toggles activate/deactivate state for selected constraints Seçili kısıtlamaların durumu için etkinleştir/devre dışı bırak seçeneklerini değiştirir @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Taslakçı - + Toggle reference/driving constraint Referans / sürüş kısıtlamasını değiştir - + Toggles the toolbar or selected constraints to/from reference mode Araç çubuğunu veya seçilen kısıtlamaları referans modundan / referans modundan / süreden ayırır @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Taslakçı - + Trim edge Kenar düzeltin - + Trim an edge with respect to the picked position Bir kenarı seçilen konuma göre kırpın @@ -1952,47 +1952,47 @@ Otomatik kısıtlama hatası: Eşitlik kısıtlamaları uygulandıktan sonra eskiz çözülemez. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Eğrilerin kesişimini tahmin edemiyoruz. Dilimlemeyi planladığınız eğrilerin köşeleri arasında çakışan bir kısıtlama eklemeyi deneyin. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. OCE/OCC'NİN bu sürümü düğüm işlemini desteklemez. 6.9.0 veya daha yüksek gerekir. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometri Dizini (GeoID) sınırların dışında. - + You are requesting no change in knot multiplicity. Düğüm çokluğunda herhangi bir değişiklik istemiyorsunuz. - + The Geometry Index (GeoId) provided is not a B-spline curve. Sağlanan Geometri Dizini (GeoId) bir B-spline eğrisi değil. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Düğüm endeksi sınırların dışındadır. OCC gösterimine göre, ilk düğümün indeks 1'i olduğunu ve sıfır olmadığını unutmayın. - + The multiplicity cannot be increased beyond the degree of the B-spline. Çeşitlilik, B-spline'nın derecesinin ötesinde artırılamaz. - + The multiplicity cannot be decreased beyond zero. Çokluk sıfırdan aşağıya düşürülemez. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC, maksimum tolerans dahilinde çokluğu azaltamıyor. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Eskiden kenarları / kenarları seçin. - - - - + + + + Dimensional constraint Boyutsal kısıtlama @@ -2232,273 +2232,273 @@ Seçilenlerden biri eskiz üzerinde olmak zorunda - - + + Select an edge from the sketch. Taslaktan bir kenar seç - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint İmkansız kısıt - - - - + + + + The selected edge is not a line segment Seçilen kenar çizgi parçası değil - - - - - - + + + + + + Double constraint Çift kısıtlama - - - - + + + + The selected edge already has a horizontal constraint! Seçilen kenar zaten yatay bir kısıtlamaya sahip! - - - - + + + + The selected edge already has a vertical constraint! Seçilen kenar zaten dikey bir kısıtlamaya sahip! - - - - - - + + + + + + The selected edge already has a Block constraint! Seçilen kenarın zaten bir Blok kısıtlaması var! - + The selected item(s) can't accept a horizontal constraint! Seçilen öğeler yatay bir sınırlamayı kabul edemez! - + There are more than one fixed point selected. Select a maximum of one fixed point! Seçilen birden fazla sabit nokta vardır. En fazla bir sabit nokta seçin! - + The selected item(s) can't accept a vertical constraint! Seçilen öğeler dikey kısıtlamayı kabul edemez! - + There are more than one fixed points selected. Select a maximum of one fixed point! Seçilen birden fazla sabit nokta vardır. En fazla bir tane sabit nokta seçin! - - + + Select vertices from the sketch. Eskiden krokileri seçin. - + Select one vertex from the sketch other than the origin. Köşeden başka bir taslaktan bir köşe seçin. - + Select only vertices from the sketch. The last selected vertex may be the origin. Eskiden sadece köşeleri seçin. Son seçilen köşe orijin olabili. - + Wrong solver status Yanlış çözücü durumu - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. Eskiz çözülmediyse veya gereksiz ve/veya çakışan kısıtlamalar varsa, bir blok kısıtlaması eklenemez. - + Select one edge from the sketch. Eskizden bir kenar seçin. - + Select only edges from the sketch. Eskizden sadece kenarları seçin. - - - - - - - + + + + + + + Error Hata - + Select two or more points from the sketch. Eskiden iki veya daha fazla nokta seçin. - - + + Select two or more vertexes from the sketch. Eskizden iki veya daha fazla köşe seçin. - - + + Constraint Substitution Kısıtlamayı değiştir - + Endpoint to endpoint tangency was applied instead. Bunun yerine, uç noktalar arasında teğetsel bir kısıtlama uygulandı. - + Select vertexes from the sketch. Eskiden krokileri seçin. - - + + Select exactly one line or one point and one line or two points from the sketch. Çizimden tam olarak bir çizgi veya bir nokta ve bir çizgi veya iki nokta seçin. - + Cannot add a length constraint on an axis! Bir eksende bir uzunluk sınırlaması eklenemiyor! - + This constraint does not make sense for non-linear curves Bu kısıtlama doğrusal olmayan eğriler için mantıklı değil - - - - - - + + + + + + Select the right things from the sketch. Eskiden eskizlerden birini seçin. - - + + Point on B-spline edge currently unsupported. B-spline kenarındaki nokta şu anda desteklenmiyor. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Seçilen noktalardan hiçbiri ilgili eğrilere aynı elemanın parçaları olduğu için ya da ikisi de harici geometri olduğu için kısıtlanmış değildi. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Bir nokta ve birkaç eğriyi veya bir eğriyi ve birkaç noktayı seçin. % 1 eğri ve% 2 nokta seçtiniz. - - - - + + + + Select exactly one line or up to two points from the sketch. - Çizimden tam bir satır veya en fazla iki puan seçin. + Çizimden bir çizgi veya en fazla iki nokta seçin. - + Cannot add a horizontal length constraint on an axis! Bir eksene yatay uzunluk kısıtı eklenemiyor! - + Cannot add a fixed x-coordinate constraint on the origin point! Orijin noktasına sabit bir x-koordinat kısıtlaması eklenemiyor! - - + + This constraint only makes sense on a line segment or a pair of points Bu kısıtlama sadece bir çizgi segmentinde veya bir çift nokta üzerinde mantıklı olur - + Cannot add a vertical length constraint on an axis! Bir eksene dikey uzunluk kısıtı eklenemiyor! - + Cannot add a fixed y-coordinate constraint on the origin point! Orijin noktasına sabit bir y-koordinat kısıtlaması eklenemiyor! - + Select two or more lines from the sketch. Eskizden iki veya daha fazla çizgi seçin. - - + + Select at least two lines from the sketch. Çizimden en az iki satır seçin. - + Select a valid line Geçerli bir satır seçin - - + + The selected edge is not a valid line Seçilen kenarlık geçerli bir çizgi değil - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokta; iki eğri ve bir nokta. - + Select some geometry from the sketch. perpendicular constraint Eskizden bazı geometriyi seçin. - + Wrong number of selected objects! perpendicular constraint Seçilen nesnelerin sayısı yanlış! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3 nesneyle 2 eğri ve 1 nokta olmalıdır. - - + + Cannot add a perpendicularity constraint at an unconnected point! Bağlantısız bir noktaya diklik kısıtı eklenemiyor! - - - + + + Perpendicular to B-spline edge currently unsupported. B-spline kenarına dikey şu anda desteklenmiyor. - - + + One of the selected edges should be a line. Seçilen kenarlardan bir tanesi bir çizgi olmalıdır. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokta; iki eğri ve bir nokta. - + Select some geometry from the sketch. tangent constraint Eskizden bazı geometriyi seçin. - + Wrong number of selected objects! tangent constraint Seçilen nesnelerin sayısı yanlış! - - - + + + Cannot add a tangency constraint at an unconnected point! Bağlantısız bir noktaya bir teğet sınırlaması eklenemiyor! - - - + + + Tangency to B-spline edge currently unsupported. Şu anda desteklenmeyen B-spline kenarlığı için teğet. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uç noktalar arasında teğetsel bir kısıtlama uygulandı. Çakışık kısıtlama dilindi. - - - - + + + + Select one or more arcs or circles from the sketch. Eskizden bir veya daha fazla yay veya daire seçin. - - + + Constrain equal Eşit tutmak - + Do you want to share the same radius for all selected elements? Seçilen tüm öğeler için aynı yarıçapı paylaşmak ister misiniz? - - + + Constraint only applies to arcs or circles. Kısıtlama yalnızca yaylar veya daireler için geçerlidir. - + Do you want to share the same diameter for all selected elements? Seçilen tüm elemanlar için aynı çapı paylaşmak ister misiniz? - - + + Select one or two lines from the sketch. Or select two edges and a point. Çizimden bir veya iki çizgi seçin. Ya da iki kenar ve bir nokta seçin. - - + + Parallel lines Paralel çizgiler - - + + An angle constraint cannot be set for two parallel lines. İki paralel çizgi için açı sınırlaması ayarlanamaz. - + Cannot add an angle constraint on an axis! Bir eksene açı sınırlaması eklenemiyor! - + Select two edges from the sketch. Eskizden iki kenar seçin. - - + + Select two or more compatible edges İki veya daha fazla uyumlu kenarı seçin - + Sketch axes cannot be used in equality constraints Eskiz ekseni eşitlik kısıtlamaları içinde kullanılamaz - + Equality for B-spline edge currently unsupported. B-spline kenarı için eşitlik şu anda desteklenmiyor. - - + + Select two or more edges of similar type Benzer tipte iki veya daha fazla kenar seçin - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Eskizden iki nokta ve bir simetri çizgisi, iki nokta ve bir simetri noktası veya bir çizgi ve bir simetri noktası seçin. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Bir çizgi ile bitiş noktaları arasında bir simetri kısıtı eklenemez! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Işınlar gibi davranacak çizgilerin uç noktalarını seçin ve kenarları bir sınırı temsil eden bir kenar seçin. İlk seçilen nokta, n1, ikinci - n2 indeksine, datum değeri de n2 / n1 oranına karşılık gelir. - + Selected objects are not just geometry from one sketch. Seçilen nesneler sadece bir taslaktaki geometri değildir. - + Number of selected objects is not 3 (is %1). Seçilen nesnelerin sayısı 3 değil (% 1). - + Cannot create constraint with external geometry only!! Yalnızca dış geometri ile kısıtlama oluşturulamaz!! - + Incompatible geometry is selected! Uyumsuz geometri seçildi! - + SnellsLaw on B-spline edge currently unsupported. B-spline kenarındaki SnellsLaw şu anda desteklenmiyor. - - + + Select at least one ellipse and one edge from the sketch. Eskiden en az bir elips ve bir kenar seçin. - + Sketch axes cannot be used in internal alignment constraint Eskiz ekseni iç hizalama kısıtlamasında kullanılamaz - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. Bir elipsi diğer elips üzerinde dahili olarak sınırlayamazsınız. Sadece bir elips seçin. - - + + Maximum 2 points are supported. - Maksimum 2 puan desteklenmektedir. + En fazla 2 nokta desteklenmektedir. - - + + Maximum 2 lines are supported. Maksimum 2 satır desteklenir. - - + + Nothing to constrain Kısıtlayacak bir şey yok - + Currently all internal geometry of the ellipse is already exposed. Şu anda elipsin tüm iç geometrisi zaten açıktır. - - - - + + + + Extra elements Fazladan elementler - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Verilen elips için mümkün olduğunca çok eleman sağlandı. Bunlar dikkate alınmadı. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. Dahili olarak bir elipsin yayını diğer elipsin yayı üzerinde sınırlandıramazsınız. Sadece bir elips yayı seçin. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Bir elipsi, bir elips yayında kısıtlayamazsınız. Sadece bir elips veya elips yayını seçin. - + Currently all internal geometry of the arc of ellipse is already exposed. Şu anda elips yayının tüm iç geometrisi zaten açıktır. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Verilen elips yayının mümkün olmadığı kadar çok eleman sağlanmıştır. Bunlar dikkate alınmadı. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Şu anda iç geometri yalnızca elipsin veya elipsin yayı için desteklenir. Son seçilen eleman elips veya elips yay olmalıdır. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Eskizden kısıtlamaları seçin. - + CAD Kernel Error CAD Çekirdek Hatası @@ -2941,42 +2941,42 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Karbon kopyası dairesel bağımlılığa neden olur. - + This object is in another document. Bu nesne başka bir belgede. - + This object belongs to another body. Hold Ctrl to allow cross-references. Bu cisim başka bir vücuda bağlı. İç göndermelere izin vermek için Ctrl tuşuna basılı tut. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Bu obje başka bir vücuda ait ve dış geometrisi var. İç göndermeye izin verilemedi. - + This object belongs to another part. Bu nesne başka bir parçaya ait. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. Seçili eskiz, bu eskize paralel değil. Paralel olmayan eskizlere izin vermek için Ctrl+Alt tuşlarını basılı tutun. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Seçili eskizin XY eksenleri, bu eskiz ile aynı doğrultuya sahip değil. Göz ardı etmek için Ctrl+Alt tuşlarını basılı tutun. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Seçili eskizin orijin noktası, b eskizin orijin noktası ile hizalı değil. Göz ardı etmek için Ctrl+Alt tuşlarını basılı tutun. @@ -3062,8 +3062,8 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Çap ekle - - + + Radius: Yarıçap: @@ -3074,8 +3074,8 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Çap Ekle - - + + Diameter: Çap: @@ -3103,24 +3103,24 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Uzunluk: - - + + Change radius Yarıçapını değiştir - - + + Change diameter Çapı değiştir - + Refractive index ratio Refraktif indeks oranı - + Ratio n2/n1: Oran n2/n1: @@ -3136,22 +3136,22 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Bağlamak dairesel bağımlılığa neden olacaktır. - + This object is in another document. Bu nesne başka bir belgede. - + This object belongs to another body, can't link. Bu nesne başka bir cisme aittir, bağlanamaz. - + This object belongs to another part, can't link. Bu nesne başkasına ait kısmı, bağlanamaz. @@ -3192,8 +3192,8 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt SketcherGui::PropertyConstraintListItem - - + + Unnamed Adsız @@ -3301,8 +3301,7 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt If selected, each element in the array is constrained with respect to the others using construction lines - If selected, each element in the array is constrained -with respect to the others using construction lines + Seçilirse, dizideki her bir öğe, yapı çizgileri kullanarak diğerlerine göre kısıtlanır @@ -3912,6 +3911,26 @@ Bununla birlikte, bitiş noktalarına bağlanan herhangi bir kısıtlama bulunam All constraints that deal with external geometry were deleted. Dış geometri ile ilgilenen tüm kısıtlamalar silindi. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4277,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher doğrulama - + Invalid constraints Geçersiz kısıtlamalar - - + + + Fix Düzelt - - + + + Find Bul - + Delete constraints to external geom. Kısıtlamaları harici coğrafyaya sil. - + Missing coincidences Eksik tesadüfler - + Tolerance: Dayanıklılık: - + Highlight open vertexes Açık köşeleri vurgulayın - + Ignore construction geometry Yapı geometrisini görmezden gel + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Ters çevrilmiş Harici geometri - + Swap endpoints in constraints Kısıtlamalardaki uç noktaları değiştir - + Constraint orientation locking Kısıtlama yönü kilitleme - + Enable/Update / Güncelle etkinleştirme - + Disable Devre dışı @@ -4329,104 +4355,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Taslağı düzenle - + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? - + Invalid sketch Geçersiz eskiz - + Do you want to open the sketch validation tool? Eskiz doğrulama aracını açmak istiyor musunuz? - + The sketch is invalid and cannot be edited. Eskiz geçersizdir ve düzenlenemez. - + Please remove the following constraint: Lütfen aşağıdaki kısıtlamayı kaldırın: - + Please remove at least one of the following constraints: Lütfen aşağıdaki kısıtlamalardan en az birini kaldırın: - + Please remove the following redundant constraint: Lütfen aşağıdaki gereksiz kısıtlamayı kaldırın: - + Please remove the following redundant constraints: Lütfen aşağıdaki gereksiz kısıtlamaları kaldırın: - + Empty sketch Boş eskiz - + Over-constrained sketch Aşırı kısıtlı eskiz - - - + + + (click to select) (seçmek için tıkla) - + Sketch contains conflicting constraints Eskiz çakışan kısıtlamaları içeriyor - + Sketch contains redundant constraints Eskiz, gereksiz kısıtlamaları içeriyor - + Fully constrained sketch Tamamen kısıtlanmış eskiz - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec %1 saniye içinde çözüldü - + Unsolved (%1 sec) Çözülmemiş (%1 sn.) @@ -4515,8 +4541,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Bir çemberin veya bir yayın yarıçapını düzelt @@ -4524,8 +4550,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Bir dairenin veya bir yayın yarıçapını düzeltme @@ -4542,8 +4568,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Uç noktaları ve yay boyunca bir nokta ile bir yay oluşturma @@ -4551,8 +4577,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points 3 kenar noktası ile bir daire oluşturun @@ -4560,8 +4586,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Merkezine ve bitiş noktalarına göre bir yay oluşturma @@ -4569,8 +4595,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Merkezinden, büyük yarıçapı ve uç noktalarından elips yayı oluşturun @@ -4578,8 +4604,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Merkezi, büyük yarıçapı ve bitiş noktaları ile hiperbola yay oluşturun @@ -4587,8 +4613,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Odak noktası, köşe noktası ve bitiş noktaları ile parabolün yay oluşturun @@ -4596,13 +4622,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points Kontrol noktalarıyla B-spline - - + + Create a B-spline by control points Kontrol noktalarına göre B-spline oluşturma @@ -4610,8 +4636,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Merkezi ve bir kenar noktası ile bir daire oluşturun @@ -4619,8 +4645,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Periapsis, apoapsis ve minor radius ile elips oluşturun @@ -4628,8 +4654,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Merkez, büyük yarıçap ve nokta ile bir elips yarat @@ -4637,8 +4663,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Merkezinden ve bir köşeden bir heptagon oluşturun @@ -4646,8 +4672,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Merkezinden ve bir köşeden bir altıgen oluşturun @@ -4655,14 +4681,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Merkezinden ve bir köşeden bir sekizgen oluşturun - - + + Create a regular polygon by its center and by one corner Merkezinden ve bir köşeden düzenli çokgen oluşturma @@ -4670,8 +4696,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Merkezinden ve bir köşeden bir beşgen oluştur @@ -4679,8 +4705,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Merkezi ve bir köşesinde bir kare oluşturun @@ -4688,8 +4714,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Merkezinden ve bir köşeden eşkenar üçgen oluşturun @@ -4697,13 +4723,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Kontrol noktalarıyla periyodik B-spline - - + + Create a periodic B-spline by control points Kontrol noktalarına göre periyodik B-spline oluşturma diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm index cdd1e6da73..c65de3eec7 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index 2c64957637..26c4e8ce2f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Створювач ескізів - + CarbonCopy CarbonCopy - + Copies the geometry of another sketch Copies the geometry of another sketch @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Створювач ескізів - + Constrain arc or circle Обеження для дуги або кола - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Обмеження за радіусом - + Constrain diameter Constrain diameter @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Створювач ескізів - + Create arc Створення дуги - + Create an arc in the sketcher Створити дугу в ескізі - + Center and end points Центральні та кінцеві точки - + End points and rim point За кінцевими та дотичною точками @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Створювач ескізів - + Create a B-spline Create a B-spline - + Create a B-spline in the sketch Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Створювач ескізів - + Create circle Створення кола - + Create a circle in the sketcher Створити коло в ескізі - + Center and rim point Центральні та кінцеві точки - + 3 rim points 3 дотичних точки @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Створювач ескізів - + Create a conic Створити конус - + Create a conic in the sketch Створити в ескізі конус - + Ellipse by center, major radius, point Еліпс за центром, великим радіусом, точкою - + Ellipse by Periapsis, apoapsis, minor radius Еліпс по перицентру, апоцентру та малому радіусу - + Arc of ellipse by center, major radius, endpoints Дуга еліпсу по центру, великому радіусові та кінцевих точках - + Arc of hyperbola by center, major radius, endpoints Дуга гіперболи по центру, великому радіусові та кінцевих точках - + Arc of parabola by focus, vertex, endpoints Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Створювач ескізів - + Create regular polygon Створити правильний багатокутник - + Create a regular polygon in the sketcher Create a regular polygon in the sketcher - + Triangle Трикутник - + Square Квадрат - + Pentagon П'ятикутник - + Hexagon Шестикутник - + Heptagon Семикутник - + Octagon Восьмикутник - + Regular Polygon Regular Polygon @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Створювач ескізів - + Constrain angle Кут обмеження - + Fix the angle of a line or the angle between two lines Зафіксувати кут лінії або кут між двома лініями @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Створювач ескізів - + Constrain Block Constrain Block - + Create a Block constraint on the selected item Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Створювач ескізів - + Constrain coincident Обмеження збігів - + Create a coincident constraint on the selected item Створити обмеження збігів (коінцидентності) для обраних елементів @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Створювач ескізів - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Створювач ескізів - + Constrain distance Обмеження відстані - + Fix a length of a line or the distance between a line and a vertex Фіксувати довжину лінії або відстань між лінією та вершиною @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Створювач ескізів - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Виправити вертикальну відстань між двома точками або кінцями ліній @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Створювач ескізів - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Виправити вертикальну відстань між двома точками або кінцями ліній @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Створювач ескізів - + Constrain equal Обмеження по еквівалентності - + Create an equality constraint between two lines or between circles and arcs Створити обмеження еквівалентності між двома лініями, або між колами і дугами @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Створювач ескізів - + Constrain horizontally Горизонтальне обмеження - + Create a horizontal constraint on the selected item Створити обмеження по горизонталі для вибраного елементу @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Створювач ескізів - + Constrain InternalAlignment Обмеження за внутрішнім вирівнюванням - + Constrains an element to be aligned with the internal geometry of another element Обмежує елемент вирівнюючи з внутрішньою геометрією іншого елемента @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Створювач ескізів - + Constrain lock Обмеження блокування - + Create a lock constraint on the selected item Зафіксувати обрані об'єкти @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Створювач ескізів - + Constrain parallel Паралельне обмеження - + Create a parallel constraint between two lines Створити паралельне обмеження між двома лініями @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Створювач ескізів - + Constrain perpendicular Обмеження за перпендикулярністю - + Create a perpendicular constraint between two lines Створити обмеження за перпендикулярністю між двома лініями @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Створювач ескізів - + Constrain point onto object Обмежити точки об'єктом - + Fix a point onto an object Зафіксувати точку на об'єкті @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Створювач ескізів - + Constrain radius Обмеження за радіусом - + Fix the radius of a circle or an arc Зафіксувати радіус кола або дуги @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Створювач ескізів - + Constrain refraction (Snell's law') Обмеження за заломленням (закон Снеліуса) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Створити обмеження за законом заломлення (закон Снеліуса) між двома точками променя та ребром як межею. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Створювач ескізів - + Constrain symmetrical Обмеження за симетрією - + Create a symmetry constraint between two points with respect to a line or a third point Створити обмеження за симетрією між двома точками відносно лінії або третьої точки @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Створювач ескізів - + Constrain tangent Дотичне обмеження - + Create a tangent constraint between two entities Створити дотичне обмеження між двома об'ектами @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Створювач ескізів - + Constrain vertically Вертикальне обмеження - + Create a vertical constraint on the selected item Створити обмеження по вертикалі для вибраного елементу @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Створювач ескізів - + Create arc by three points Створити дугу за трьома точками - + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Створювач ескізів - + Create circle by three points Створити коло за трьома точками - + Create a circle by 3 perimeter points Створити коло за трьома точками периметра @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Створювач ескізів - + Create arc by center Створити дугу по центру - + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Створювач ескізів - + Create an arc of ellipse Створити дугу еліпса - + Create an arc of ellipse in the sketch Створити в ескізі дугу еліпса @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Створювач ескізів - + Create an arc of hyperbola Створити дугу гіперболи - + Create an arc of hyperbola in the sketch Створити дугу гіперболи у ескізі @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Створювач ескізів - + Create an arc of parabola Create an arc of parabola - + Create an arc of parabola in the sketch Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Створювач ескізів - + Create B-spline Create B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Створювач ескізів - + Create circle Створення кола - + Create a circle in the sketch Створення кола в ескізі @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Створювач ескізів - + Create draft line Створення допоміжної лінії - + Create a draft line in the sketch Створення допоміжної лінії в ескізі @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Створювач ескізів - + Create ellipse by 3 points Створити еліпс за трьома точками - + Create an ellipse by 3 points in the sketch Створити в ескізі еліпс за 3 точками @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Створювач ескізів - + Create ellipse by center Створити еліпс по центру - + Create an ellipse by center in the sketch Створити в ескізі еліпс по центру @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Створювач ескізів - + Create fillet Створити скруглення - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Створювач ескізів - + Create heptagon Створити семикутник - + Create a heptagon in the sketch Створити в ескізі семикутник @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Створювач ескізів - + Create hexagon Створити шестикутник - + Create a hexagon in the sketch Створити в ескізі шестикутник @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Створювач ескізів - + Create line Створення лінії - + Create a line in the sketch Створення лінії в ескізі @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Створювач ескізів - + Create octagon Створити восьмикутник - + Create an octagon in the sketch Створити в ескізі восьмикутник @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Створювач ескізів - + Create pentagon Створити п’ятикутник - + Create a pentagon in the sketch Створити в ескізі п’ятикутник @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Створювач ескізів - + Create periodic B-spline Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Створювач ескізів - + Create point Створення точки - + Create a point in the sketch Створення точки в ескізі @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Створювач ескізів - + Create polyline Створення полілінії - + Create a polyline in the sketch. 'M' Key cycles behaviour Створити ламану лінію у ескізі. Клавіша 'M' циклічна зміна режиму @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Створювач ескізів - + Create rectangle Створити прямокутник - + Create a rectangle in the sketch Створіть прямокутник в ескізі @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Створювач ескізів - + Create regular polygon Створити правильний багатокутник - + Create a regular polygon in the sketch Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Створювач ескізів - + Create slot Створити паз - + Create a slot in the sketch Створити паз в ескізі @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Створювач ескізів - + Create square Створити квадрат - + Create a square in the sketch Створити квадрат в ескізі @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Створювач ескізів - + Create text Створення тексту - + Create text in the sketch Створення тексту в ескізі @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Створювач ескізів - + Create equilateral triangle Створити рівнобічний трикутник - + Create an equilateral triangle in the sketch Створити рівнобічний трикутник в ескізі @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Створювач ескізів - + Extend edge Extend edge - + Extend an edge with respect to the picked position Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Створювач ескізів - + External geometry Зовнішня геометрія - + Create an edge linked to an external geometry Створити ребро, яке прив’язане на зовнішню геометрію @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Створювач ескізів - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Створювач ескізів - + Toggle reference/driving constraint Перемкнути режим обмеження в посилання/водіння - + Toggles the toolbar or selected constraints to/from reference mode Перемикає панель або обране обмеження в/із режим(у) посилання @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Створювач ескізів - + Trim edge Обрізати ребро - + Trim an edge with respect to the picked position Обрізати ребро відповідно до обраної позиції @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Обрати ребро(-а) з ескізу. - - - - + + + + Dimensional constraint Обмеження розміру @@ -2232,273 +2232,273 @@ Один з обраних має бути на ескізі - - + + Select an edge from the sketch. Виберіть ребро в ескізі. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Обмеження неможливе - - - - + + + + The selected edge is not a line segment Обране ребро не є відрізком лінії - - - - - - + + + + + + Double constraint Подвійне обмеження - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! На обраний(і) елемент(и) не можна накласти горизонтальне обмеження! - + There are more than one fixed point selected. Select a maximum of one fixed point! There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! На обраний(і) елемент(и) не можна накласти вертикальне обмеження! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. Виберіть одну вершину з ескізу, крім початку координат. - + Select only vertices from the sketch. The last selected vertex may be the origin. Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + + + + + + Error Помилка - + Select two or more points from the sketch. Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. Оберіть на ескізі принаймні дві вершини. - - + + Constraint Substitution Constraint Substitution - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. Вибір вершин з ескізу. - - + + Select exactly one line or one point and one line or two points from the sketch. Оберіть на ескізі лише одну лінію, або одну точку та одну лінію, або дві точки. - + Cannot add a length constraint on an axis! Не можу додати обмеження довжини на вісь! - + This constraint does not make sense for non-linear curves This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Виберіть або одну крапку і кілька кривих, або одну криву і кілька крапок. Ви вибрали %1криві(их) і %2 крапки - - - - + + + + Select exactly one line or up to two points from the sketch. Оберіть на ескізі лише одну лінію або до двох точок. - + Cannot add a horizontal length constraint on an axis! Не можу додати горизонтального обмеження довжини на вісь! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! Не можу додати вертикального обмеження довжини на вісь! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Оберіть на ескізі дві або більше ліній. - - + + Select at least two lines from the sketch. Оберіть на ескізі принаймні дві лінії. - + Select a valid line Оберіть припустиму лінію - - + + The selected edge is not a valid line Обране ребро не є припустимою лінією - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Допустимі комбінації: дві криві; кінцева точка і крива; дві кінцевих точки; дві криві та крапка. - + Select some geometry from the sketch. perpendicular constraint Виберіть деяку геометрію ескізу. - + Wrong number of selected objects! perpendicular constraint Неправильна кількість виділених об'єктів! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Коли вибрано 3 елементи, це повинні бути 2 криві і одна точка. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не вдалося визначити накласти обмеження перпендикулярності на точку, бо виділена точка не є частиною кривої! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. Одна з кромок повинна бути лінією. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. - + Select some geometry from the sketch. tangent constraint Виберіть деяку геометрію ескізу. - + Wrong number of selected objects! tangent constraint Неправильна кількість виділених об'єктів! - - - + + + Cannot add a tangency constraint at an unconnected point! Не можу додати обмеження дотичної у крапці, що не належить кривій! - - - + + + Tangency to B-spline edge currently unsupported. Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. Виберіть одну або кілька дуг чи кіл з ескізу. - - + + Constrain equal Обмеження по еквівалентності - + Do you want to share the same radius for all selected elements? Бажаєте призначити однаковий радіус для всіх обраних елементів? - - + + Constraint only applies to arcs or circles. Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Виберіть одну або дві лінії з ескізу. Або вибрати два ребра і крапку. - - + + Parallel lines Паралельні лінії - - + + An angle constraint cannot be set for two parallel lines. Обмеження кута не можна встановити на паралельні лінії. - + Cannot add an angle constraint on an axis! Не можу додати кутового обмеження на осі! - + Select two edges from the sketch. Виберіть два ребра з ескізу. - - + + Select two or more compatible edges Виберіть два або більше сумісних крайок - + Sketch axes cannot be used in equality constraints До осі ескізу неможна застосовувати для обмеження рівності - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type Виберіть два або більше ребер подібного типу - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Виберіть дві точки і лінію симетрії, або дві точки і крапку симетрії, або лінію і точку симетрії з ескізу. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Неможливо додати обмеження симетрії між лінією і її кінцевими точками! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Вибрані об'єкти не з одного ескізу. - + Number of selected objects is not 3 (is %1). Кількість обраних об'єктів не 3 а %1. - + Cannot create constraint with external geometry only!! Неможливо створити обмеження тільки з зовнішньою геометрією!! - + Incompatible geometry is selected! Обрана несумісна геометрія! - + SnellsLaw on B-spline edge currently unsupported. SnellsLaw on B-spline edge currently unsupported. - - + + Select at least one ellipse and one edge from the sketch. Оберіть на ескізі принаймні один еліпс та одне ребро. - + Sketch axes cannot be used in internal alignment constraint Осі ескізу неможна прив'язувати до внутрішньої геометрії - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. До еліпсу можна прив'язати не більше двох точок. - - + + Maximum 2 lines are supported. До еліпсу можна прив'язати не більше двох ліній. - - + + Nothing to constrain Намає чого обмежувати - + Currently all internal geometry of the ellipse is already exposed. Вся внутрішня геометрія цього еліпса вже зайнята. - - - - + + + + Extra elements Додаткові елементи - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Було надано більше елементів, ніж можливо для даного еліпса. Зайві були проігноровані. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Вся внутрішня геометрія цієї дуги еліпса вже зайнята. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Було надано більше елементів, ніж можливо для даного дуги еліпса. Зайві елементи були проігноровані. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Внутрішня геометрія доступна тільки для еліпсів і дуг еліпса. Еліпс/дуга еліпса повинна бути виділена в останню чергу. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Оберіть обмеження з ескізу. - + CAD Kernel Error CAD Kernel Error @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Carbon copy would cause a circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Вставити радіус - - + + Radius: Радіус: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert diameter - - + + Diameter: Diameter: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Довжина: - - + + Change radius Змінити радіус - - + + Change diameter Change diameter - + Refractive index ratio Коефіцієнт заломлення - + Ratio n2/n1: Співвідношення n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Linking this will cause circular dependency. - + This object is in another document. This object is in another document. - + This object belongs to another body, can't link. This object belongs to another body, can't link. - + This object belongs to another part, can't link. This object belongs to another part, can't link. @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Без назви @@ -3912,6 +3912,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. All constraints that deal with external geometry were deleted. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Перевірка ескіза - + Invalid constraints Неприпустимі обмеження - - + + + Fix Виправити - - + + + Find Знайти - + Delete constraints to external geom. Delete constraints to external geom. - + Missing coincidences Збіги відсутні - + Tolerance: Допуск: - + Highlight open vertexes Highlight open vertexes - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Reversed external geometry - + Swap endpoints in constraints Swap endpoints in constraints - + Constraint orientation locking Constraint orientation locking - + Enable/Update Дозволити/оновти - + Disable Вимкнути @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Редагувати ескіз - + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? - + Invalid sketch Неприпустимий ескіз - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Будь ласка, видаліть наступне обмеження: - + Please remove at least one of the following constraints: Будь ласка, видаліть принаймні одне з таких обмежень: - + Please remove the following redundant constraint: Будь ласка, видаліть наступне надлишкове обмеження: - + Please remove the following redundant constraints: Видаліть, будь ласка, наступні надлишкові обмеження: - + Empty sketch Порожній ескіз - + Over-constrained sketch Ескіз має надлишкові обмеження - - - + + + (click to select) (натисніть, щоб вибрати) - + Sketch contains conflicting constraints Ескіз містить обмеження, які суперечать одне одному - + Sketch contains redundant constraints Ескіз містить надлишкові обмеження - + Fully constrained sketch Ескіз повністю визначений - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Обраховано за %1 с - + Unsolved (%1 sec) Не обраховано (%1 с) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Зафіксувати радіус кола або дуги @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Create an arc by its end points and a point along the arc @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Create a circle by 3 rim points @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Create an arc by its center and by its end points @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Створити дугу еліпса по його центру, головному радіусу та кінцевим точкам @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Create an arc of hyperbola by its center, major radius, endpoints @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Створити коло по його центру та точкою радіусу @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Create a ellipse by periapsis, apoapsis, and minor radius @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Create an ellipse by center, major radius and point @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Створити семикутник по його центру та одному куту @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Створити шестикутник по його центру та одному куту @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Створити восьмикутник по його центру та одному куту - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Створити п'ятикутник по його центру та одному куту @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Створити квадрат по його центру та одному куту @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Створити рівнобічний трикутник по його центру та одному куту @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm index 351b6760ff..5ee2e3998f 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts index d7a3f51bcf..0128d529ac 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Còpia - + Copies the geometry of another sketch Copia la geometria d'un altre esbós @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Restringeix l'arc o el cercle - + Constrain an arc or a circle Restringeix un arc o un cercle - + Constrain radius Restricció del radi - + Constrain diameter Restringeix el diàmetre @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Crear un arc en l'esbós - + Center and end points Centre i extrems - + End points and rim point Extrems i punt sobre la vora @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Crea un B-spline - + Create a B-spline in the sketch Crea un B-spline en l'esbós @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Crea un cercle - + Create a circle in the sketcher Crea un cercle en el dibuix - + Center and rim point Centre i punt sobre la vora - + 3 rim points 3 punts sobre la vora @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Crea una cònica - + Create a conic in the sketch Crea una cònica en l'esbós - + Ellipse by center, major radius, point El·lipse donats el centre, el radi major i un punt - + Ellipse by Periapsis, apoapsis, minor radius El·lipse donats el periàpside, l'apoàpside i el radi menor - + Arc of ellipse by center, major radius, endpoints Arc d'el·lipse donats el centre, el radi major i els extrems - + Arc of hyperbola by center, major radius, endpoints Arc d'hipèrbola donats el centre, el radi major i els extrems - + Arc of parabola by focus, vertex, endpoints Arc de paràbola pel focus, el vèrtex i els extrems @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Crea un polígon regular - + Create a regular polygon in the sketcher Crea un polígon regular en l'entorn de l'esbós - + Triangle Triangle - + Square Quadrat - + Pentagon Pentàgon - + Hexagon Hexàgon - + Heptagon Heptàgon - + Octagon Octàgon - + Regular Polygon Polígon regular @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Restricció d'angle - + Fix the angle of a line or the angle between two lines Fixa l'angle d'una línia o l'angle entre dues línies @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Restringeix el bloc - + Create a Block constraint on the selected item Crea un bloc restringit en l'element seleccionat @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Restricció coincident - + Create a coincident constraint on the selected item Crea una restricció coincident en l'element seleccionat @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Restringeix el diàmetre - + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Restricció de distància - + Fix a length of a line or the distance between a line and a vertex Fixa una longitud d'una línia o la distància entre una línia i un vèrtex @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixa la distància horitzontal entre dos punts o extrems de línia @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixa la distància vertical entre dos punts o extrems de línia @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Restricció d'igualtat - + Create an equality constraint between two lines or between circles and arcs Crea una restricció d'igualtat entre dues línies o entre cercles i arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Restricció horitzontal - + Create a horizontal constraint on the selected item Crea una restricció horitzontal en l'element seleccionat @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Restricció d'alineació interna - + Constrains an element to be aligned with the internal geometry of another element Restringeix un element per a alinear-lo amb la geometria interna d'un altre element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Restricció de bloqueig - + Create a lock constraint on the selected item Crea una restricció de bloqueig en l'element seleccionat @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Restricció de parel·lelisme - + Create a parallel constraint between two lines Crea una restricció de paral·lelisme entre dues línies @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Restricció de perpendicularitat - + Create a perpendicular constraint between two lines Crea una restricció de perpendicularitat entre dues línies @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Restricció d'un punt sobre l'objecte - + Fix a point onto an object Fixa un punt sobre un objecte @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Restricció del radi - + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Restricció de la refracció (llei d'Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Crea una restricció de llei de refracció (llei d'Snell) entre dos extrems dels raigs i una aresta com a interfície. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Restricció de simetria - + Create a symmetry constraint between two points with respect to a line or a third point Crea una restricció de simetria entre dos punts respecte a una línia o a un tercer punt @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Restricció tangent - + Create a tangent constraint between two entities Crea una restricció tangent entre dues entitats @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Restricció veertical - + Create a vertical constraint on the selected item Crea una restricció vertical en l'element seleccionat @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Crea un arc donats tres punts - + Create an arc by its end points and a point along the arc Crea un arc donats els extrems i un punt al llarg de l'arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Crea un cercle donats tres punts - + Create a circle by 3 perimeter points Crea un cercle donats tres punts del perímetre @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Crea un arc donat el centre - + Create an arc by its center and by its end points Crea un arc donats el centre i els extrems @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Crea un arc d'el·lipse - + Create an arc of ellipse in the sketch Crea un arc d'el·lipse en l'esbós @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Crea un arc d'hipèrbola - + Create an arc of hyperbola in the sketch Crea un arc d'hipèrbola en l'esbós @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Crea un arc de paràbola - + Create an arc of parabola in the sketch Crea un arc de paràbola en l'esbós @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Crea un B-spline - + Create a B-spline via control points in the sketch. Crea un B-spline donats els punts de control en l'esbós. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Crea un cercle - + Create a circle in the sketch Crea un cercle en el dibuix @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Crea una línia d'esborrany - + Create a draft line in the sketch Crea una línia d'esborrany en el dibuix @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Crear l'el·lipse per 3 punts - + Create an ellipse by 3 points in the sketch Crea una el·lipse per 3 punts en el dibuix @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Crea el·lipse donat el centre - + Create an ellipse by center in the sketch Crea una el·lipse donat el centre en el dibuix @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Crea un arredoniment - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Crea un heptàgon - + Create a heptagon in the sketch Crea un heptàgon en el dibuix @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Crea un hexàgon - + Create a hexagon in the sketch Crea un hexàgon en el dibuix @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Crea una línia - + Create a line in the sketch Crea una línia en el dibuix @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Crea un octàgon - + Create an octagon in the sketch Crea un octàgon en el dibuix @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Crea un pentàgon - + Create a pentagon in the sketch Crea un pentàgon en el dibuix @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Crea un B-spline periòdic - + Create a periodic B-spline via control points in the sketch. Crea un B-spline periòdic donats uns punts de control en l'esbós. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Crea un punt - + Create a point in the sketch Crea un punt en el dibuix @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Crea una polilínia - + Create a polyline in the sketch. 'M' Key cycles behaviour Crea una polilínia en l'esbós. La tecla 'M' commuta el comportament. @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Crea un rectangle - + Create a rectangle in the sketch Crea un rectangle en el dibuix @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Crea un polígon regular - + Create a regular polygon in the sketch Crea un polígon regular en l'esbós @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Crea una ranura - + Create a slot in the sketch Crea una ranura en el dibuix @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Crea un quadrat - + Create a square in the sketch Crea un quadrat en el dibuix @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Crea un text - + Create text in the sketch Crea un text en el dibuix @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Crea un triangle equilàter - + Create an equilateral triangle in the sketch Crea un triangle equilàter en el dibuix @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Estén una aresta - + Extend an edge with respect to the picked position Estén una aresta respecte a la posició seleccionada @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Geometria externa - + Create an edge linked to an external geometry Crea una aresta vinculada a una geometria externa @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Activa/desactiva la restricció - + Toggles activate/deactivate state for selected constraints Activa/desactiva l'estat de les restriccions seleccionades @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Commuta entre restricció guia/referència - + Toggles the toolbar or selected constraints to/from reference mode Commuta la barra d'eines o les restriccions seleccionades al/des del mode de construcció @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Retalla l'aresta - + Trim an edge with respect to the picked position Retalla una aresta respecte a la posició seleccionada @@ -1952,47 +1952,47 @@ Error de restricció: esbós irresoluble si s'apliquen restriccions d'igualtat. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. No s'ha trobat la intersecció de les corbes. Intenteu afegir una restricció coincident entre els vèrtexs de les corbes que esteu intentant arrodonir. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Aquesta versió d' OCE/OCC no permet operacions de nus. Necessiteu 6.9.0 o posteriors. - + BSpline Geometry Index (GeoID) is out of bounds. L'índex de geometria BSpline (GeoID) està fora de les restriccions. - + You are requesting no change in knot multiplicity. Se us ha demanat que no canvieu la multiplicitat del nus. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'índex de geometria (GeoId) proporcionat no és una corba de B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'índex del nus és fora dels límits. Tingueu en compte que d'acord amb la notació d'OCC, el primer nus té l'índex 1 i no zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicitat no es pot augmentar més enllà del grau del B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicitat no es pot reduir més enllà de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC no pot reduir la multiplicitat dins de la tolerància màxima. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Seleccioneu arestes de l'esbós - - - - + + + + Dimensional constraint Restricció de dimensió @@ -2232,273 +2232,273 @@ Un dels elements seleccionats ha de ser en l'esbós - - + + Select an edge from the sketch. Seleccioneu una aresta de l'esbós - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Restricció impossible - - - - + + + + The selected edge is not a line segment L'aresta seleccionada no és un segment de línia - - - - - - + + + + + + Double constraint Restricció doble - - - - + + + + The selected edge already has a horizontal constraint! L'aresta seleccionada ja té una restricció horitzontal. - - - - + + + + The selected edge already has a vertical constraint! L'aresta seleccionada ja té una restricció vertical. - - - - - - + + + + + + The selected edge already has a Block constraint! L'aresta seleccionada ja té una restricció de Bloc. - + The selected item(s) can't accept a horizontal constraint! Els elements seleccionats no poden acceptar una restricció horitzontal. - + There are more than one fixed point selected. Select a maximum of one fixed point! Hi ha més d'un punt fixe seleccionat! Seleccioneu com a màxim un punt fixe! - + The selected item(s) can't accept a vertical constraint! Els elements seleccionats no poden acceptar una restricció vertical. - + There are more than one fixed points selected. Select a maximum of one fixed point! Hi ha més d'un punt fixe seleccionat! Seleccioneu-ne com a màxim un de fixe. - - + + Select vertices from the sketch. Seleccioneu vèrtexs de l'esbós - + Select one vertex from the sketch other than the origin. Seleccioneu un vèrtex de l'esbós diferent de l'origen - + Select only vertices from the sketch. The last selected vertex may be the origin. Seleccioneu només vèrtexs de l'esbós. L'últim vèrtex seleccionat pot ser l'origen. - + Wrong solver status Estat de sistema de resolució incorrecte - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. No es pot afegir una restricció de bloc si l'esbós no està resolt o hi ha un error redundant o restriccions en conflicte. - + Select one edge from the sketch. Seleccioneu una aresta de l'esbós. - + Select only edges from the sketch. Seleccioneu sols arestes de l'esbós. - - - - - - - + + + + + + + Error Error - + Select two or more points from the sketch. Seleccioneu una o més punts de l'esbós - - + + Select two or more vertexes from the sketch. Seleccioneu un o més vèrtexs de l'esbós - - + + Constraint Substitution Substitucions de restricions - + Endpoint to endpoint tangency was applied instead. En el seu lloc s'ha aplicat una tangència entre extrems. - + Select vertexes from the sketch. Seleccioneu vèrtexs de l'esbós - - + + Select exactly one line or one point and one line or two points from the sketch. Seleccioneu únicament una línia o un punt i una línia o dos punts de l'esbós - + Cannot add a length constraint on an axis! No es pot afegir una restricció de longitud sobre un eix. - + This constraint does not make sense for non-linear curves Aquesta restricció no té sentit per a corbes no lineals - - - - - - + + + + + + Select the right things from the sketch. Seleccioneu els elements correctes de l'esbós - - + + Point on B-spline edge currently unsupported. Un punt sobre la vora del B-spline no s'admet actualment. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Cap dels punts seleccionats s'han restringit a les corbes respectives, perquè són peces del mateix element o perquè ambdues són de geometria externa. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Seleccioneu o un punt i diverses corbes, o una corba i diversos punts. Heu seleccionat %1 corbes i %2 punts. - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccioneu únicament una línia o fins a dos punts de l'esbós - + Cannot add a horizontal length constraint on an axis! No es pot afegir una restricció de longitud horitzontal sobre un eix. - + Cannot add a fixed x-coordinate constraint on the origin point! No es pot afegir una restricció de coordenada x fixa sobre el punt d'origen. - - + + This constraint only makes sense on a line segment or a pair of points Aquesta restricció només té sentit sobre un segment de línia o un parell de punts - + Cannot add a vertical length constraint on an axis! No es pot afegir una restricció de longitud vertical sobre un eix. - + Cannot add a fixed y-coordinate constraint on the origin point! No es pot afegir una restricció de coordenada y fixa sobre el punt d'origen. - + Select two or more lines from the sketch. Seleccioneu una o més línies de l'esbós - - + + Select at least two lines from the sketch. Seleccioneu almenys dues línies de l'esbós - + Select a valid line Seleccioneu una línia vàlida - - + + The selected edge is not a valid line L'aresta seleccionada no és una línia vàlida. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2506,45 +2506,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. perpendicular constraint Seleccioneu alguna geometria de l'esbós - + Wrong number of selected objects! perpendicular constraint El nombre d'objectes seleccionats és incorrecte. - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Amb 3 objectes, hi ha d'haver 2 corbes i 1 punt. - - + + Cannot add a perpendicularity constraint at an unconnected point! No es pot afegir una restricció de perpendicularitat en un punt no connectat. - - - + + + Perpendicular to B-spline edge currently unsupported. Una perpendicular a la vora del B-spline no s'admet actualment. - - + + One of the selected edges should be a line. Una de les arestes seleccionades ha de ser una línia. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2552,249 +2552,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. tangent constraint Seleccioneu alguna geometria de l'esbós - + Wrong number of selected objects! tangent constraint El nombre d'objectes seleccionats és incorrecte. - - - + + + Cannot add a tangency constraint at an unconnected point! No es pot afegir una restricció de tangència en un punt no connectat. - - - + + + Tangency to B-spline edge currently unsupported. La tangència a la vora del B-spline no s'admet actualment. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. S'ha aplicat una tangència entre extrems. S'han suprimit les restriccions coincidents. - - - - + + + + Select one or more arcs or circles from the sketch. Seleccioneu un o diversos arcs o cercles de l'esbós - - + + Constrain equal Restricció d'igualtat - + Do you want to share the same radius for all selected elements? Voleu compartir el mateix radi per a tots els elements seleccionats? - - + + Constraint only applies to arcs or circles. La restricció només s'aplica a arcs i cercles. - + Do you want to share the same diameter for all selected elements? Voleu compartir el mateix diàmetre per a tots els elements seleccionats? - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccioneu una o dues línies de l'esbós. O seleccioneu dues arestes i un punt - - + + Parallel lines Línies paral·leles - - + + An angle constraint cannot be set for two parallel lines. Una restricció d'angle no es pot definir per dues línies paral·leles. - + Cannot add an angle constraint on an axis! No es pot afegir una restricció d'angle sobre un eix. - + Select two edges from the sketch. Seleccioneu dues arestes de l'esbós - - + + Select two or more compatible edges Seleccioneu dues o més arestes compatibles - + Sketch axes cannot be used in equality constraints Els eixos de l'esbós no es poden utilitzar en les restriccions d'igualtat. - + Equality for B-spline edge currently unsupported. La igualtat per a la vora del B-spline no s'admet actualment. - - + + Select two or more edges of similar type Seleccioneu una o més arestes de tipus similar - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccioneu de l'esbós dos punts i una línia de simetria, dos punts i un punt de simetria o una línia i un punt de simetria - - - - + + + + Cannot add a symmetry constraint between a line and its end points! No es pot afegir una restricció de simetria entre una línia i els seus extrems. - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccioneu dos punts finals de línies perquè actuen com a raigs i una aresta que representa un límit. El primer punt seleccionat correspon a l'índex n1, el segon a n2 i el valor de referència estableix la relació n2/n1. - + Selected objects are not just geometry from one sketch. Els objectes seleccionats no són només geometria d'un esbós. - + Number of selected objects is not 3 (is %1). El nombre d'objectes seleccionats no és 3 (és %1). - + Cannot create constraint with external geometry only!! No es poden crear restriccions únicament amb una geometria externa!! - + Incompatible geometry is selected! La geometria seleccionada és incompatible. - + SnellsLaw on B-spline edge currently unsupported. La llei d'Snells sobre la vora del B-spline no s'admet actualment. - - + + Select at least one ellipse and one edge from the sketch. Seleccioneu almenys una el·lipse i una vora de l'esbós - + Sketch axes cannot be used in internal alignment constraint Els eixos de l'esbós no es poden utilitzar en la restricció d'alineació interna. - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. No podeu restringir internament una el·lipse sobre una altra el·lipse. Seleccioneu-ne sols una. - - + + Maximum 2 points are supported. S'admeten com a màxim 2 punts. - - + + Maximum 2 lines are supported. S'admeten com a màxim 2 línies. - - + + Nothing to constrain No hi ha res per a restringir - + Currently all internal geometry of the ellipse is already exposed. Actualment tota la geometria interna de l'el·lipse ja està exposada. - - - - + + + + Extra elements Elements addicionals - - - + + + More elements than possible for the given ellipse were provided. These were ignored. S'han proporcionat més dels elements possibles per a l'el·lipse donada. S'ignoraran. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. No podeu restringir internament un arc d'el·lipse sobre un altre arc d'el·lipse. Seleccioneu-ne sols un. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. No podeu restringir internament una el·lipse o un arc d'el·lipse. Seleccioneu només una el·lipse o un arc d'el·lipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Actualment tota la geometria interna de l'arc d'el·lipse ja està exposada. - + More elements than possible for the given arc of ellipse were provided. These were ignored. S'han proporcionat més dels elements possibles per a l'arc d'el·lipse donat. S'ignoraran. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Actualment la geometria interna només s'admet per a l'el·lipse i l'arc d'el·lipse. L'últim element selecccionat ha de ser una el·lipse o un arc d'el·lipse. - - - - - + + + + + @@ -2802,7 +2802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleccioneu restriccions de l'esbós - + CAD Kernel Error Error del nucli del CAD @@ -2937,42 +2937,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. La còpia pot provocar una dependència circular. - + This object is in another document. Aquest objecte és en un altre document. - + This object belongs to another body. Hold Ctrl to allow cross-references. Aquest objecte pertany a un altre cos. Manteniu la tecla Ctrl per a permetre les referències creuades. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. Aquest objecte pertany a un altre cos i conté geometria externa. No es permeten les referències creuades. - + This object belongs to another part. Aquest objecte pertany a una altra peça. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. L'esbós seleccionat no és paral·lel a aquest esbós. Manteniu les tecles Ctrl+Alt per a permetre esbossos no paral·lels. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Els eixos XY de l'esbós seleccionat no tenen la mateixa direcció en aquest esbós. Manteniu les tecles Ctrl+Alt per a ignorar-ho. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. L'origen de l'esbós seleccionat no està alineat amb l'origen d'aquest esbós. Manteniu les tecles Ctrl+Alt per a ignorar-ho. @@ -3058,8 +3058,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insereix un radi - - + + Radius: Radi: @@ -3070,8 +3070,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Introduïu el diàmetre - - + + Diameter: Diàmetre: @@ -3099,24 +3099,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - - + + Change radius Canvia els radis - - + + Change diameter Canvia el diàmetre - + Refractive index ratio Índex de refracció - + Ratio n2/n1: Relació n2/n1: @@ -3132,22 +3132,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. L'enllaç s'això provocarà una dependència circular - + This object is in another document. Aquest objecte és en un altre document. - + This object belongs to another body, can't link. Aquest objecte no es pot enllaçar perquè pertany a un altre cos. - + This object belongs to another part, can't link. Aquest objecte no es pot enllaçar perquè pertany a una altra peça. @@ -3188,8 +3188,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed Sense nom @@ -3895,6 +3895,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. Totes les restriccions vinculades a una geometria externa s'han suprimit. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4241,70 +4261,77 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Validació de l'esbós - + Invalid constraints Restriccions no vàlides - - + + + Fix Repara - - + + + Find Cerca - + Delete constraints to external geom. Suprimeix les restriccions vinculades a la geometria externa - + Missing coincidences Coincidències perdudes - + Tolerance: Tolerància: - + Highlight open vertexes Ressalta els vèrtexs oberts - + Ignore construction geometry Ignora la geometria de construcció + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Geometria externa inversa - + Swap endpoints in constraints Intercanvia els extrems de les restriccions - + Constraint orientation locking Restricció de bloqueig d'orientació - + Enable/Update Activa/actualitza - + Disable Desactiva @@ -4312,104 +4339,104 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch L'esbós no és vàlid. - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. L'esbós no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + Empty sketch L'esbós és buit. - + Over-constrained sketch Esbós sobrerestringit - - - + + + (click to select) (feu clic per a seleccionar) - + Sketch contains conflicting constraints L'esbós conté restriccions amb conflictes. - + Sketch contains redundant constraints L'esbós conté restriccions redundants. - + Fully constrained sketch Esbós completament restringit - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Esbós sota restriccions amb<a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grau</span></a> de llibertat - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Esbós sota restriccions amb<a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graus</span></a> de llibertat - + Solved in %1 sec Solucionat en %1 s - + Unsolved (%1 sec) Sense solucionar (%1 s) @@ -4498,8 +4525,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -4507,8 +4534,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -4525,8 +4552,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Crea un arc donats els extrems i un punt al llarg de l'arc @@ -4534,8 +4561,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Crea un cercle donats tres punts de la vora @@ -4543,8 +4570,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArc - - + + Create an arc by its center and by its end points Crea un arc donats el centre i els extrems @@ -4552,8 +4579,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Crea un arc d'el·lipse donats el centre, el radi major i els extrems @@ -4561,8 +4588,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Crea un arc d'hipèrbola donats el centre, el radi major i els extrems @@ -4570,8 +4597,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Crea un arc de paràbola donats el focus, el vèrtex i els extrems @@ -4579,13 +4606,13 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateBSpline - + B-spline by control points B-spline per punts de control - - + + Create a B-spline by control points Crea un B-spline donats els punts de control @@ -4593,8 +4620,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Crea un cercle donats el centre i un punt de la vora @@ -4602,8 +4629,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Crea una el·lipse donats el periàpside, l'apoàpside i el radi menor @@ -4611,8 +4638,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Crea una el·lipse donats el centre, el radi major i un punt @@ -4620,8 +4647,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Crea un heptàgon donats el centre i un vèrtex @@ -4629,8 +4656,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Crea un hexàgon donats el centre i un vèrtex @@ -4638,14 +4665,14 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Crea un octàgon donats el centre i un vèrtex - - + + Create a regular polygon by its center and by one corner Crea un polígon regular donats el centre i un vèrtex @@ -4653,8 +4680,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Crea un pentàgon donats el centre i un vèrtex @@ -4662,8 +4689,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateSquare - - + + Create a square by its center and by one corner Crea un quadrat donats el centre i un vèrtex @@ -4671,8 +4698,8 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Crea un triangle equilàter donats el centre i un vèrtex @@ -4680,13 +4707,13 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periòdic per punts de control - - + + Create a periodic B-spline by control points Crea un B-spline periòdic donats els punts de control diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm index 69e20581f0..fac020d8ec 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts index 66b2a37310..253e4a285e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy Bản sao giấy than - + Copies the geometry of another sketch Sao chép hình học của bản phác họa khác @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle Ràng buộc cung hay đường tròn - + Constrain an arc or a circle Ràng buộc một cung hay đường tròn - + Constrain radius Cố định bán kính - + Constrain diameter Ràng buộc đường kính @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc Create arc - + Create an arc in the sketcher Tạo một cung tròn trong bản phác họa - + Center and end points Điểm trung tâm và điểm cuối - + End points and rim point Các điểm cuối và điểm ở rìa @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline Tạo một đường cong B-spline - + Create a B-spline in the sketch Tạo một đường cong B-spline trong bản phác họa @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle Tạo đường tròn - + Create a circle in the sketcher Tạo một đường tròn trong bản phác họa - + Center and rim point Điểm ở trung tâm và ở rìa - + 3 rim points 3 điểm ở rìa @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic Tạo một hình nón - + Create a conic in the sketch Tạo một hình nón trong bản phác họa - + Ellipse by center, major radius, point Hình elip theo tâm, bán kính chính, điểm - + Ellipse by Periapsis, apoapsis, minor radius Ellipse tạo bởi điểm gần nhất trong quỹ đạo, điểm xa nhất trong quỹ đạo, bán kính nhỏ - + Arc of ellipse by center, major radius, endpoints Cung tròn e líp tạo bởi tâm, bán kính lớn, điểm cuối - + Arc of hyperbola by center, major radius, endpoints Cung hyperbol tạo bởi tâm, bán kính lớn, điểm cuối - + Arc of parabola by focus, vertex, endpoints Cung hyperbol tạo bởi trọng tâm, đỉnh và điểm cuối @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Tạo đa giác đều - + Create a regular polygon in the sketcher Tạo một đa giác đều trong bản phác họa - + Triangle Tam giác - + Square Hình vuông - + Pentagon Hình ngũ giác - + Hexagon Hình lục giác - + Heptagon Hình thất giác - + Octagon Hình bát giác - + Regular Polygon Đa giác cân @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle Cố định góc - + Fix the angle of a line or the angle between two lines Sửa góc của một đường thẳng hoặc góc giữa hai đường thẳng @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block Cố định khối - + Create a Block constraint on the selected item Tạo một ràng buộc khối trên đối tượng đã chọn @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident Cố định trùng nhau - + Create a coincident constraint on the selected item Tạo ràng buộc trùng hợp ngẫu nhiên trên đối tượng đã chọn @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter Ràng buộc đường kính - + Fix the diameter of a circle or an arc Sửa đường kính của một cung hay đường tròn @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance Cố định khoảng cách - + Fix a length of a line or the distance between a line and a vertex Sửa chiều dài của một đường hoặc khoảng cách giữa một đường thẳng và một đỉnh @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Sửa khoảng cách ngang giữa hai điểm hoặc hai đầu của đường thẳng @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Sửa khoảng cách thẳng đứng giữa hai điểm hoặc hai đầu của đường thẳng @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal Cố định ngang bằng - + Create an equality constraint between two lines or between circles and arcs Tạo một ràng buộc ngang bằng giữa hai đường thẳng hoặc giữa các đường tròn và các cung tròn @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally Cố định theo chiều ngang - + Create a horizontal constraint on the selected item Tạo ràng buộc theo phương ngang trên đối tượng đã chọn @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment Hạn chế căn chỉnh bên trong - + Constrains an element to be aligned with the internal geometry of another element Ràng buộc một phần tử được căn chỉnh với hình bên trong của phần tử khác @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock Cố định chốt - + Create a lock constraint on the selected item Tạo một ràng buộc chốt trên đối tượng đã chọn @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel Cố định song song - + Create a parallel constraint between two lines Tạo một sự ràng buộc song song giữa hai đường thẳng @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular Cố định vuông góc - + Create a perpendicular constraint between two lines Tạo một sự ràng buộc vuông góc giữa hai đường thẳng @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object Cố định các điểm lên đối tượng - + Fix a point onto an object Sửa một điểm trên một đối tượng @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius Cố định bán kính - + Fix the radius of a circle or an arc Sửa bán kính của một đường tròn hoặc một cung tròn @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') Hạn chế sự khúc xạ (Quy luật của Snell) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. Tạo ra một sự hạn chế quy luật khúc xạ (quy luật của Snell) giữa hai hai điểm cuối của tia và một cạnh như là một mặt phân giới. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical Hạn chế đối xứng - + Create a symmetry constraint between two points with respect to a line or a third point Tạo một ràng buộc đối xứng giữa hai điểm đối với một đường thẳng hoặc một điểm thứ ba @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent Cố định đường tiếp tuyến - + Create a tangent constraint between two entities Tạo một liên kết tiếp tuyến giữa hai đối tượng @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically Cố định theo chiều dọc - + Create a vertical constraint on the selected item Tạo ràng buộc theo chiều dọc trên đối tượng đã chọn @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points Tạo một cung tròn thông qua 3 điểm - + Create an arc by its end points and a point along the arc Tạo một cung tròn thông qua các điểm cuối và một điểm dọc theo cung tròn @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points Tạo đường tròn thông qua 3 điểm - + Create a circle by 3 perimeter points Tạo đường tròn thông qua 3 điểm chu vi @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center Tạo một cung tròn với một tâm cho trước - + Create an arc by its center and by its end points Tạo một cung tròn với tâm của nó và các điểm kết thúc của nó @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse Tạo một cung elip - + Create an arc of ellipse in the sketch Tạo một cung elip trong bản phác họa @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola Tạo một cung hyperbol - + Create an arc of hyperbola in the sketch Tạo một cung hyperbol trong bản phác họa @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola Tạo một cung parabol - + Create an arc of parabola in the sketch Tạo một cung parabol trong bản phác họa @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline Tạo đường cong B-spline - + Create a B-spline via control points in the sketch. Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle Tạo đường tròn - + Create a circle in the sketch Tạo một đường tròn trong bản phác họa @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line Tạo đường nháp - + Create a draft line in the sketch Tạo một đường nháp trong bản phác họa @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points Tạo hình e líp thông qua 3 điểm - + Create an ellipse by 3 points in the sketch Tạo một hình e líp thông qua 3 điểm trong bản phác họa @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center Tạo hình e líp với một tâm cho trước - + Create an ellipse by center in the sketch Tạo một hình e líp với một tâm cho trước trong bản phác họa @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet Tạo đường gờ - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon Tạo hình thất giác - + Create a heptagon in the sketch Tạo một hình thất giác trong bản phác họa @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon Tạo hình lục giác - + Create a hexagon in the sketch Tạo một hình lục giác trong bản phác họa @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line Tạo đường - + Create a line in the sketch Tạo một đường thẳng trong bản phác họa @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon Tạo hình bát giác - + Create an octagon in the sketch Tạo một hình bát giác trong bản phác họa @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon Tạo hình ngũ giác - + Create a pentagon in the sketch Tạo một hình ngũ giác trong bản phác họa @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline Tạo đường B-spline có chu kỳ - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point Tạo điểm - + Create a point in the sketch Tạo một điểm trong bản phác họa @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline Tạo đường polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour Tạo một đường polyline trong bản phác họa. Chiều khóa M chạy theo chu kỳ @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle Tạo hình chữ nhật - + Create a rectangle in the sketch Tạo một hình chữ nhật trong bản phác họa @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon Tạo đa giác đều - + Create a regular polygon in the sketch Tạo một đa giác đều trong bản phác họa @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot Tạo khe - + Create a slot in the sketch Tạo một khe trong bản phác họa @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square Tạo hình vuông - + Create a square in the sketch Tạo một hình vuông trong bản phác họa @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text Tạo văn bản - + Create text in the sketch Tạo văn bản trong bản phác họa @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle Tạo tam giác đều - + Create an equilateral triangle in the sketch Tạo tam giác đều trong bản phác họa @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge Mở rộng cạnh - + Extend an edge with respect to the picked position Mở rộng cạnh đối với vị trí đã chọn @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry Hình học bên ngoài - + Create an edge linked to an external geometry Tạo một cạnh nối với một hình học bên ngoài @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint Bật/Tắt liên kết tham chiếu/cưỡng bức - + Toggles the toolbar or selected constraints to/from reference mode Bật/Tắt thanh công cụ hoặc các liên kết đã chọn đến/từ chế độ tham chiếu @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge Cắt rìa - + Trim an edge with respect to the picked position Cắt phần rìa đối với vị trí đã chọn @@ -1952,47 +1952,47 @@ Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Phiên bản OCE / OCC này không hỗ trợ thao tác nút. Bạn cần tải phiên bản 6.9.0 hoặc cao hơn. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Bạn đang yêu cầu không có sự thay đổi trong bội số nút. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Chỉ số nút là ngoài vùng biên giới. Lưu ý rằng theo ký hiệu OCC, nút đầu tiên có chỉ số là 1 và không bằng 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Bội số không thể được giảm quá số không. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC không thể làm giảm bội số trong dung sai tối đa. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ Chọn cạnh (hoặc nhiều cạnh) từ bản phác họa. - - - - + + + + Dimensional constraint Khống chế kích thước @@ -2232,273 +2232,273 @@ Một trong những lựa chọn phải ở trên bản phác thảo - - + + Select an edge from the sketch. Chọn một cạnh từ bản phác họa. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint Ràng buộc không thích hợp - - - - + + + + The selected edge is not a line segment Cạnh được chọn không phải là một đoạn thẳng - - - - - - + + + + + + Double constraint Hạn chế kép - - - - + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! (Các) mục được chọn không thể chấp nhận một khống chế theo phương ngang! - + There are more than one fixed point selected. Select a maximum of one fixed point! Có nhiều hơn một điểm cố định được chọn. Chọn tối đa một điểm cố định! - + The selected item(s) can't accept a vertical constraint! (Các) mục được chọn không thể chấp nhận bị khống chế theo phương đứng! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. Chọn các đỉnh từ bản phác họa. - + Select one vertex from the sketch other than the origin. Chọn một đỉnh từ bản phác họa khác hơn là bản gốc. - + Select only vertices from the sketch. The last selected vertex may be the origin. Chỉ chọn những đỉnh từ bản phác họa. Đỉnh cuối cùng được chọn có thể là gốc tọa độ. - + Wrong solver status Tình trạng thiết bị giải bị lỗi - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. Chọn một cạnh từ bản phác họa. - + Select only edges from the sketch. Chỉ chọn các cạnh từ bản phác họa. - - - - - - - + + + + + + + Error Lỗi - + Select two or more points from the sketch. Chọn hai hoặc nhiều điểm từ bản phác họa. - - + + Select two or more vertexes from the sketch. Chọn hai hoặc nhiều đỉnh từ bản phác họa. - - + + Constraint Substitution Sự thay thế liên kết - + Endpoint to endpoint tangency was applied instead. Thay vào đó, tiếp tiếp từ điểm cuối đến điểm cuối được áp dụng. - + Select vertexes from the sketch. Chọn các đỉnh từ bản phác họa. - - + + Select exactly one line or one point and one line or two points from the sketch. Chọn chính xác một đường hoặc một điểm và một đường hoặc hai điểm từ bản phác họa. - + Cannot add a length constraint on an axis! Không thể khống chế chiều dài trên một trục! - + This constraint does not make sense for non-linear curves Liên kết này không có ý nghĩa gì đối với các đường cong phi tuyến - - - - - - + + + + + + Select the right things from the sketch. Chọn đúng những thứ từ bản phác họa. - - + + Point on B-spline edge currently unsupported. Điểm trên rìa đường cong B-spline hiện tại không được chống đỡ. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Không có điểm nào trong số các điểm được chọn liên kết với các đường cong tương ứng, bởi vì chúng cùng thuộc một phần tử hoặc bởi vì họ đều là các hình bên ngoài. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. Chọn một điểm và một số đường cong hoặc một đường cong và một vài điểm. Bạn đã chọn %1 đường cong và %2 điểm. - - - - + + + + Select exactly one line or up to two points from the sketch. Chọn chính xác một đường hoặc đến hai điểm từ bản phác họa. - + Cannot add a horizontal length constraint on an axis! Không thể khống chế chiều dài theo phương ngang trên một trục! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points Liên kết này chỉ có ý nghĩa với một đoạn thẳng hoặc một cặp điểm - + Cannot add a vertical length constraint on an axis! Không thể khống chế chiều dài theo phương đứng trên một trục! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Chọn hai hoặc nhiều đường từ bản phác họa. - - + + Select at least two lines from the sketch. Chọn ít nhất hai đường từ bản phác họa. - + Select a valid line Chọn một đường hợp lệ - - + + The selected edge is not a valid line Cạnh đã chọn không phải là một đường hợp lệ - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Các tổ hợp được chấp nhận: hai đường cong; điểm cuối và một đường cong; hai điểm cuối; hai đường cong và một điểm. - + Select some geometry from the sketch. perpendicular constraint Chọn một hình từ bản phác họa. - + Wrong number of selected objects! perpendicular constraint Số đối tượng đã chọn bị sai! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint Với 3 đối tượng, phải có 2 đường cong và 1 điểm. - - + + Cannot add a perpendicularity constraint at an unconnected point! Không thể thêm một liên kết vuông góc ở điểm không được nối! - - - + + + Perpendicular to B-spline edge currently unsupported. Vuông góc với rìa đường cong B-spline hiện tại không được chống đỡ. - - + + One of the selected edges should be a line. Một trong các cạnh được chọn nên là một đường thẳng. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối và một đường cong; hai điểm cuối; hai đường cong và một điểm. - + Select some geometry from the sketch. tangent constraint Chọn một hình từ bản phác họa. - + Wrong number of selected objects! tangent constraint Số đối tượng đã chọn bị sai! - - - + + + Cannot add a tangency constraint at an unconnected point! Không thể thêm một liên kết tiếp tuyến tại điểm không được nối! - - - + + + Tangency to B-spline edge currently unsupported. Tiếp tuyến với đường cong B-spline hiện tại không được chống đỡ. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Tiếp tiếp từ điểm đầu này đến điểm đầu kia được áp dụng. Liên kết trùng khớp bị xóa. - - - - + + + + Select one or more arcs or circles from the sketch. Chọn một hoặc nhiều cung hoặc đường tròn từ bản phác họa. - - + + Constrain equal Cố định ngang bằng - + Do you want to share the same radius for all selected elements? Bạn có muốn chia sẻ cùng một bán kính cho tất cả các phần tử đã chọn hay không? - - + + Constraint only applies to arcs or circles. Liên kết chỉ áp dụng cho các cung tròn hoặc đường tròn. - + Do you want to share the same diameter for all selected elements? Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. Chọn một hoặc hai đường từ bản phác họa. Hoặc chọn hai cạnh và một điểm. - - + + Parallel lines Các đường thẳng song song - - + + An angle constraint cannot be set for two parallel lines. Một liên kết góc không thể được tạo bởi hai đường thẳng song song. - + Cannot add an angle constraint on an axis! Không thể thêm một liên kết góc trên một trục! - + Select two edges from the sketch. Chọn hai cạnh từ bản phác họa. - - + + Select two or more compatible edges Chọn hai hoặc nhiều cạnh tương thích - + Sketch axes cannot be used in equality constraints Không thể sử dụng các trục phác thảo trong các liên kết ngang bằng - + Equality for B-spline edge currently unsupported. Tính ngang bằng cho rìa đường cong B-pline hiện tại không được hỗ trợ. - - + + Select two or more edges of similar type Chọn hai hay nhiều cạnh loại tương tự - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Chọn hai điểm và một đường đối xứng, hai điểm và một điểm đối xứng hoặc một đường thẳng và một điểm đối xứng từ bản phác họa. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! Không thể thêm một liên kết đối xứng giữa một đường và 2 điểm ở cuối 2 đầu đường thẳng ấy! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Chọn hai điểm cuối của các đường để hoạt động như các tia, và một cạnh đại diện cho một đường biên. Điểm được chọn đầu tiên tương ứng với chỉ số n1, điểm thứ hai - đến n2 và giá trị mốc đặt tỷ lệ n2/n1. - + Selected objects are not just geometry from one sketch. Chọn các đối tượng không phải là các hình học chỉ từ một bản phác họa. - + Number of selected objects is not 3 (is %1). Số các đối tượng đã chọn không phải là 3 (là %1). - + Cannot create constraint with external geometry only!! Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! Hình học không tương thích được chọn! - + SnellsLaw on B-spline edge currently unsupported. Quy luật của Snell đối với đường cong B-spline hiện tại không được hỗ trợ. - - + + Select at least one ellipse and one edge from the sketch. Chọn ít nhất một hình elip và cạnh từ bản phác họa. - + Sketch axes cannot be used in internal alignment constraint Các trục bản phác họa không thể được sử dụng trong liên kết hiệu chỉnh bên trong - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. Tối đa 2 điểm được hỗ trợ. - - + + Maximum 2 lines are supported. Tối đa 2 đường được hỗ trợ. - - + + Nothing to constrain Không có gì để ràng buộc - + Currently all internal geometry of the ellipse is already exposed. Hiện tại tất cả các hình bên trong hình elip đã được phơi ra. - - - - + + + + Extra elements Các phần tử bổ sung - - - + + + More elements than possible for the given ellipse were provided. These were ignored. Có thể có nhiều phần tử hơn cho hình elip được cung cấp. Nhưng chúng bị bỏ qua. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. Hiện tại tất cả các hình bên trong cung elip đã được phơi ra. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Có thể có nhiều phần tử hơn cho cung elip được cung cấp. Nhưng chúng đã bị bỏ qua. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Hiện tại, các hình bên trong chỉ được hỗ trợ cho hình elip hoặc cung elip. Phần tử cuối cùng phải là một hình elip hoặc một cung elip. - - - - - + + + + + @@ -2806,7 +2806,7 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Chọn các liên kết từ bản phác họa. - + CAD Kernel Error Lỗi bộ phận nòng cốt của CAD @@ -2941,42 +2941,42 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. Bản sao carbon sẽ tạo ra một sự phụ thuộc vòng. - + This object is in another document. Đối tượng này là trong một tài liệu khác. - + This object belongs to another body. Hold Ctrl to allow cross-references. This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. Đối tượng này thuộc về một phần khác. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. Các trục XY của bản phác họa đã chọn không có cùng hướng như bản phác họa này. Nhấn giữ phím Ctrl+Alt để bỏ qua nó. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. Gốc tọa độ của bản phác họa không được căn chỉnh với gốc tọa độ của bản phác họa này. Nhấn giữ tổ hợp phím Ctrl+Alt để bỏ qua nó. @@ -3062,8 +3062,8 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Chèn bán kính - - + + Radius: Bán kính: @@ -3074,8 +3074,8 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Đường kính trong - - + + Diameter: Đường kính: @@ -3103,24 +3103,24 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Length: - - + + Change radius Thay đổi bán kính - - + + Change diameter Đổi đường kính - + Refractive index ratio Tỷ số chiết suất - + Ratio n2/n1: Tỷ số n2/n1: @@ -3136,22 +3136,22 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối SketcherGui::ExternalSelection - + Linking this will cause circular dependency. Liên kết đối tượng này sẽ gây ra sự phụ thuộc vòng. - + This object is in another document. Đối tượng này là trong một tài liệu khác. - + This object belongs to another body, can't link. Đối tượng này thuộc về phần thân khác, không thể liên kết. - + This object belongs to another part, can't link. Đối tượng này thuộc về phần thân khác, không thể liên kết. @@ -3192,8 +3192,8 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối SketcherGui::PropertyConstraintListItem - - + + Unnamed Không có tên @@ -3912,6 +3912,26 @@ Tuy nhiên, không có tìm thấy ràng buộc nào liên kết với các đi All constraints that deal with external geometry were deleted. Tất cả các ràng buộc gắn với hình học bên ngoài đã bị xóa. + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4258,70 +4278,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Xác thực bản phác họa - + Invalid constraints Những ràng buộc không hợp lệ - - + + + Fix Sửa - - + + + Find Tìm - + Delete constraints to external geom. Loại bỏ ràng buộc của các phần tử hình học bên ngoài. - + Missing coincidences Các điểm trùng nhau - + Tolerance: Dung sai: - + Highlight open vertexes Làm nổi bật các đỉnh không bị che khuất - + Ignore construction geometry Bỏ qua hình học xây dựng + Degenerated geometry + Degenerated geometry + + + Reversed external geometry Hình học bên ngoài đảo ngược - + Swap endpoints in constraints Trao đổi các điểm cuối trong các liên kết - + Constraint orientation locking Khóa định hướng ràng buộc - + Enable/Update Cho phép/Cập nhật - + Disable Không cho phép @@ -4329,104 +4356,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Bản phác họa không hợp lệ - + Do you want to open the sketch validation tool? Bạn có muốn mở công cụ xác thực bản phác họa? - + The sketch is invalid and cannot be edited. Bản phác họa không hợp lệ và không thể bị chỉnh sửa. - + Please remove the following constraint: Hãy loại bỏ những liên kết sau: - + Please remove at least one of the following constraints: Hãy loại bỏ ít nhất một trong những liên kết sau đây: - + Please remove the following redundant constraint: Hãy loại bỏ liên kết thừa sau đây: - + Please remove the following redundant constraints: Hãy loại bỏ các liên kết thừa sau đây: - + Empty sketch Bản phác họa trống - + Over-constrained sketch Bản phác họa bị quá hạn chế - - - + + + (click to select) (nhấp chuột để chọn) - + Sketch contains conflicting constraints Bản phác họa bao gồm những liên kết ngược chiều - + Sketch contains redundant constraints Bản phác họa bao gồm những liên kết thừa - + Fully constrained sketch Bản phác thảo đã được ràng buộc hoàn toàn - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec Được xử lý trong %1 giây - + Unsolved (%1 sec) Chưa được xử lý (%1 giây) @@ -4515,8 +4542,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Sửa đường kính của một cung hay đường tròn @@ -4524,8 +4551,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Sửa bán kính của một đường tròn hoặc một cung tròn @@ -4542,8 +4569,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc Tạo một cung tròn thông qua các điểm cuối và một điểm dọc theo cung tròn @@ -4551,8 +4578,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Tạo một đường tròn đi qua 3 điểm @@ -4560,8 +4587,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points Tạo một cung tròn với tâm của nó và các điểm kết thúc của nó @@ -4569,8 +4596,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints Tạo một cung elip với tâm, bán kính chính và các điểm cuối của nó @@ -4578,8 +4605,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints Tạo một cung hyperbol với tâm, bán kính chính và các điểm cuối của nó @@ -4587,8 +4614,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Tạo một cung parabol với trọng tâm, đỉnh và các điểm cuối của nó @@ -4596,13 +4623,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points Đường cong B-spline tạo bởi các điểm khống chế - - + + Create a B-spline by control points Tạo một đường cong B-spline với các điểm khống chế @@ -4610,8 +4637,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Tạo một đường tròn với tâm và một điểm ở mép đường tròn @@ -4619,8 +4646,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius Tạo một hình ellipse với điểm gần nhất trong quỹ đạo, điểm xa nhất trong quỹ đạo và bán kính nhỏ @@ -4628,8 +4655,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point Tạo một hình e líp với tâm, bán kính lớn và điểm cuối của nó @@ -4637,8 +4664,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Tạo một hình thất giác với tâm và một góc của nó @@ -4646,8 +4673,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Tạo một hình lục giác với tâm và một góc của nó @@ -4655,14 +4682,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Tạo một hình bát giác với tâm và một góc của nó - - + + Create a regular polygon by its center and by one corner Tạo một hình đa giác đều với tâm và một góc của nó @@ -4670,8 +4697,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Tạo một hình ngũ giác với tâm và một góc của nó @@ -4679,8 +4706,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner Tạo một hình vuông với tâm và một góc của nó @@ -4688,8 +4715,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Tạo một hình tam giác đều với tâm và một góc của nó @@ -4697,13 +4724,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Đường cong B-spline tuần hoàn tạo bởi các điểm khống chế - - + + Create a periodic B-spline by control points Tạo đường cong B-spline tuần hoàn với các điểm khống chế diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm index 09d60c65d0..0ebc1b1b81 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 52ed6b7071..ad65b32a93 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher 草绘 - + CarbonCopy 复本 - + Copies the geometry of another sketch 复制另一个草图的几何元素 @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher 草绘 - + Constrain arc or circle 约束圆弧或圆 - + Constrain an arc or a circle 约束圆弧或圆 - + Constrain radius 半径约束 - + Constrain diameter 约束直径 @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher 草绘 - + Create arc 创建弧 - + Create an arc in the sketcher 在草图中创建圆弧 - + Center and end points 中心点和端点 - + End points and rim point 端点和边缘点 @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher 草绘 - + Create a B-spline 创建 B-样条 - + Create a B-spline in the sketch 在草图中创建 B-样条 @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher 草绘 - + Create circle 创建圆 - + Create a circle in the sketcher 在草图中创建圆 - + Center and rim point 圆心和边缘点 - + 3 rim points 3个边缘点 @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher 草绘 - + Create a conic 创建圆锥形 - + Create a conic in the sketch 在草图中创建圆锥形 - + Ellipse by center, major radius, point 通过中心，主要半径，点确定椭圆形状 - + Ellipse by Periapsis, apoapsis, minor radius 通过近拱点，远拱点和小半径创建椭圆 - + Arc of ellipse by center, major radius, endpoints 通过中心点，大半径和端点创建椭圆弧 - + Arc of hyperbola by center, major radius, endpoints 通过中心点，大半径和端点创建椭圆弧 - + Arc of parabola by focus, vertex, endpoints 焦点，顶点，终结点定义的抛物线弧 @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher 草绘 - + Create regular polygon 创建正多边形 - + Create a regular polygon in the sketcher 在草图设计中创建正多边形 - + Triangle 三角形 - + Square 正方形 - + Pentagon 五边形 - + Hexagon 六边形 - + Heptagon 七边形 - + Octagon 八边形 - + Regular Polygon 正多边形 @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher 草绘 - + Constrain angle 角度约束 - + Fix the angle of a line or the angle between two lines 固定一直线角度或两直线夹角 @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher 草绘 - + Constrain Block 约束块 - + Create a Block constraint on the selected item 在所选项目上创建块约束 @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher 草绘 - + Constrain coincident 重合约束 - + Create a coincident constraint on the selected item 在所选对象上创建重合约束 @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher 草绘 - + Constrain diameter 约束直径 - + Fix the diameter of a circle or an arc 固定圆或圆弧的直径 @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher 草绘 - + Constrain distance 距离约束 - + Fix a length of a line or the distance between a line and a vertex 固定线的长度或者点到线的距离 @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher 草绘 - + Constrain horizontal distance 水平距离约束 - + Fix the horizontal distance between two points or line ends 固定两点(或线端点)之间的水平距离 @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher 草绘 - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends 固定两点(或线端点)之间的垂直距离 @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher 草绘 - + Constrain equal 相等约束 - + Create an equality constraint between two lines or between circles and arcs 两直线或圆与圆弧间创建相等约束 @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher 草绘 - + Constrain horizontally 水平约束 - + Create a horizontal constraint on the selected item 在所选对象上创建水平约束 @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher 草绘 - + Constrain InternalAlignment 内部对齐约束 - + Constrains an element to be aligned with the internal geometry of another element 约束元素与另一个元素的内部几何元素对齐 @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher 草绘 - + Constrain lock 锁定约束 - + Create a lock constraint on the selected item 对所选物体创建锁定约束 @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher 草绘 - + Constrain parallel 平行约束 - + Create a parallel constraint between two lines 两条线之间创建平行约束 @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher 草绘 - + Constrain perpendicular 垂直约束 - + Create a perpendicular constraint between two lines 为两条直线创建垂直约束 @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher 草绘 - + Constrain point onto object 点约束至对象 - + Fix a point onto an object 固定点至对象 @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher 草绘 - + Constrain radius 半径约束 - + Fix the radius of a circle or an arc 固定圆或圆弧的半径 @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher 草绘 - + Constrain refraction (Snell's law') 约束折射 (斯涅尔定律) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. 通过指定两光线端点和一条边作为折射界面创建折射约束 @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher 草绘 - + Constrain symmetrical 对称约束 - + Create a symmetry constraint between two points with respect to a line or a third point 为两点创建相对于一条直线或第三点的对称约束 @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher 草绘 - + Constrain tangent 相切约束 - + Create a tangent constraint between two entities 在两实体间创建相切约束 @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher 草绘 - + Constrain vertically 垂直约束 - + Create a vertical constraint on the selected item 在所选对象上创建垂直约束 @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher 草绘 - + Create arc by three points 通过三点创建圆弧 - + Create an arc by its end points and a point along the arc 通过端点和圆弧上的一点创建一个圆弧 @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher 草绘 - + Create circle by three points 通过三点创建圆 - + Create a circle by 3 perimeter points 通过三个边界点创建圆 @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher 草绘 - + Create arc by center 通过圆心创建圆弧 - + Create an arc by its center and by its end points 通过圆心和端点创建一个圆弧 @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher 草绘 - + Create an arc of ellipse 创建椭圆弧 - + Create an arc of ellipse in the sketch 在草图中创建椭圆弧 @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher 草绘 - + Create an arc of hyperbola 创建双曲线弧 - + Create an arc of hyperbola in the sketch 在草图创建双曲线弧 @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher 草绘 - + Create an arc of parabola 创建抛物线弧 - + Create an arc of parabola in the sketch 在草图中创建椭圆弧 @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher 草绘 - + Create B-spline 创建 B-样条 - + Create a B-spline via control points in the sketch. 通过草图控制点创建B样条。 @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher 草绘 - + Create circle 创建圆 - + Create a circle in the sketch 在草图中创建一个圆 @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher 草绘 - + Create draft line 建立分模线 - + Create a draft line in the sketch 在草图中创建草稿线 @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher 草绘 - + Create ellipse by 3 points 通过三点创建椭圆 - + Create an ellipse by 3 points in the sketch 通过三点在草图中创建椭圆 @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher 草绘 - + Create ellipse by center 通过中心创建椭圆 - + Create an ellipse by center in the sketch 通过中心在草图中创建椭圆 @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher 草绘 - + Create fillet 创建圆角 - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher 草绘 - + Create heptagon 创建正七边形 - + Create a heptagon in the sketch 在草图中创建正七边形 @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher 草绘 - + Create hexagon 创建正六边形 - + Create a hexagon in the sketch 在草图中创建正六边型 @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher 草绘 - + Create line 创建线 - + Create a line in the sketch 在草图中创建一条线 @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher 草绘 - + Create octagon 创建正八边型 - + Create an octagon in the sketch 在草绘中创建正八边形 @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher 草绘 - + Create pentagon 创建正五边型 - + Create a pentagon in the sketch 在草绘中创建正五边形 @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher 草绘 - + Create periodic B-spline 创建周期 B 样条 - + Create a periodic B-spline via control points in the sketch. 通过草图控制点创建周期性B样条。 @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher 草绘 - + Create point 创建点 - + Create a point in the sketch 在草图中创建一个点 @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher 草绘 - + Create polyline 创建多段线 - + Create a polyline in the sketch. 'M' Key cycles behaviour 在草绘中创建一条折线。“M”键循环切换行为 @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher 草绘 - + Create rectangle 创建矩形 - + Create a rectangle in the sketch 在草图中创建矩形 @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher 草绘 - + Create regular polygon 创建正多边形 - + Create a regular polygon in the sketch 在草绘中创建正多边形 @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher 草绘 - + Create slot 创造长圆形 - + Create a slot in the sketch 在草图中创建长圆槽 @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher 草绘 - + Create square 创建正方形 - + Create a square in the sketch 在草图中绘制一个正方形 @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher 草绘 - + Create text 创建文本 - + Create text in the sketch 在草图中创建文本 @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher 草绘 - + Create equilateral triangle 创建等边三角形 - + Create an equilateral triangle in the sketch 在草图中创建一个等边三角形 @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher 草绘 - + Extend edge 延长边 - + Extend an edge with respect to the picked position 延长与选择位置对应的边缘 @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher 草绘 - + External geometry 外部几何体 - + Create an edge linked to an external geometry 创建一条与外部几何体关联的边 @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher 草绘 - + Toggle activate/deactivate constraint 切换激活/停用约束 - + Toggles activate/deactivate state for selected constraints 切换选中约束的激活/停用状态 @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher 草绘 - + Toggle reference/driving constraint 切换参考线/驱动约束 - + Toggles the toolbar or selected constraints to/from reference mode 从参考模式切换到工具条或者所选约束/从工具条或者所选约束切换到参考模式 @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher 草绘 - + Trim edge 修剪边缘 - + Trim an edge with respect to the picked position 根据点取位置修剪边 @@ -1952,47 +1952,47 @@ 自动约束错误: 应用相等约束后草图无法求解。 - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. 无法猜测曲线的交叉点。尝试在你打算做圆角的曲线顶点之间添加一个重合约束。 - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. 此版本的OCE/OCC 不支持节点操作。你需要6.9.0 或更高版本. - + BSpline Geometry Index (GeoID) is out of bounds. 贝赛尔样条几何图形索引(GeoID) 超出了界限。 - + You are requesting no change in knot multiplicity. 你被要求不对多重性节点做任何修改。 - + The Geometry Index (GeoId) provided is not a B-spline curve. 提供的几何图形索引 (GeoId) 不是贝赛尔样条曲线 - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. 结指数超出界限。请注意, 按照 OCC 符号, 第一个节点的索引为1, 而不是0。 - + The multiplicity cannot be increased beyond the degree of the B-spline. 多重性无法增加到超过B样条的自由度。 - + The multiplicity cannot be decreased beyond zero. 多重性不能小于0. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC 无法在最大公差范围内减少多重性。 @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ 从草图选择边 - - - - + + + + Dimensional constraint 尺寸约束 @@ -2232,273 +2232,273 @@ 其中一个选择必须在草图上 - - + + Select an edge from the sketch. 从草图中选择边. - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint 不可约束 - - - - + + + + The selected edge is not a line segment 所选的边并非一段直线 - - - - - - + + + + + + Double constraint 双重约束 - - - - + + + + The selected edge already has a horizontal constraint! 所选边已有水平约束! - - - - + + + + The selected edge already has a vertical constraint! 所选边已有垂直约束! - - - - - - + + + + + + The selected edge already has a Block constraint! 所选边已有块约束! - + The selected item(s) can't accept a horizontal constraint! 所选项目无法应用水平约束! - + There are more than one fixed point selected. Select a maximum of one fixed point! 选取了多个固定点。最多只能选择一个固定点! - + The selected item(s) can't accept a vertical constraint! 所选项目无法应用垂直约束! - + There are more than one fixed points selected. Select a maximum of one fixed point! 选取了多个固定点。最多只能选择一个固定点! - - + + Select vertices from the sketch. 从草绘选择顶点。 - + Select one vertex from the sketch other than the origin. 从草图中选取一个非原点的顶点。 - + Select only vertices from the sketch. The last selected vertex may be the origin. 从草图中仅选取顶点。最后选定的顶点可能是原点。 - + Wrong solver status 错误的求解状态 - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. 如果草绘未解决或存在冗余和/或冲突约束, 则无法添加块约束。 - + Select one edge from the sketch. 从草绘中选取一个边。 - + Select only edges from the sketch. 仅从草绘中选择边。 - - - - - - - + + + + + + + Error 错误 - + Select two or more points from the sketch. 从草绘选择两个或更多点。 - - + + Select two or more vertexes from the sketch. 从草图中选取两个或多个顶点。 - - + + Constraint Substitution 约束替换 - + Endpoint to endpoint tangency was applied instead. 已应用端点到端点相切作为替代方案。 - + Select vertexes from the sketch. 从草图中选取顶点. - - + + Select exactly one line or one point and one line or two points from the sketch. 从草图仅选取一直线, 或一点和一直线, 或两点. - + Cannot add a length constraint on an axis! 无法在坐标轴上添加长度约束! - + This constraint does not make sense for non-linear curves 此约束不适用于非线性曲线 - - - - - - + + + + + + Select the right things from the sketch. 从草绘选择正确的对象。 - - + + Point on B-spline edge currently unsupported. 当前不支持 B 样条边上的点。 - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 所选的点没有一个被约束到各自的曲线上，因为它们是在同一元素上的一部分，或是它们都是外部几何形状。 - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. 选取一点及数条曲线，或是一条曲线及数个点。您已选取 %1 条曲线及 %2 个点。 - - - - + + + + Select exactly one line or up to two points from the sketch. 从草图选择一根线或两个点. - + Cannot add a horizontal length constraint on an axis! 无法在坐标轴上添加水平长度约束! - + Cannot add a fixed x-coordinate constraint on the origin point! 无法于原点加入固定x座标的约束! - - + + This constraint only makes sense on a line segment or a pair of points 此约束只对线段或一对点有意义 - + Cannot add a vertical length constraint on an axis! 无法在坐标轴上添加垂直长度约束! - + Cannot add a fixed y-coordinate constraint on the origin point! 无法于原点加入固定y座标的约束! - + Select two or more lines from the sketch. 从草图选择两条或两条以上直线. - - + + Select at least two lines from the sketch. 至少从草图选择两直线. - + Select a valid line 选择一有效直线 - - + + The selected edge is not a valid line 所选的边并非有效直线 - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2508,45 +2508,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 接受的组合: 两条曲线; 一个端点和一个曲线; 两个端点; 两条曲线和一个点。 - + Select some geometry from the sketch. perpendicular constraint 从草图中选取一些几何属性 - + Wrong number of selected objects! perpendicular constraint 选取对象的数量有误! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 3个对象时至少需有2条曲线及1个点。 - - + + Cannot add a perpendicularity constraint at an unconnected point! 不能对没有连接点的两条线段添加"垂直"约束 - - - + + + Perpendicular to B-spline edge currently unsupported. 目前不支持垂直于的 B-样条边缘。 - - + + One of the selected edges should be a line. 所选边之一须为直线. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2556,249 +2556,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 接受的组合: 两条曲线; 一个端点和一个曲线; 两个端点; 两条曲线和一个点。 - + Select some geometry from the sketch. tangent constraint 从草图中选取一些几何属性 - + Wrong number of selected objects! tangent constraint 选取对象的数量有误! - - - + + + Cannot add a tangency constraint at an unconnected point! 不能对没有连接点的两条线段添加"相切"约束 - - - + + + Tangency to B-spline edge currently unsupported. 目前不支持与B-样条边缘相切。 - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 已应用端点到端点相切。已删除重合约束。 - - - - + + + + Select one or more arcs or circles from the sketch. 从草图中选择一个或多个弧或圆。 - - + + Constrain equal 相等约束 - + Do you want to share the same radius for all selected elements? 你想要将所有所选元素的半径设置成相同的吗？ - - + + Constraint only applies to arcs or circles. 约束只适用于圆弧或圆。 - + Do you want to share the same diameter for all selected elements? 你想要将所有所选元素的直径设置成相同的吗？ - - + + Select one or two lines from the sketch. Or select two edges and a point. 从草图中选择一或两条直线。或选择两条边和一个点。 - - + + Parallel lines 平行线 - - + + An angle constraint cannot be set for two parallel lines. 不能为两条平行线设置角度约束。 - + Cannot add an angle constraint on an axis! 无法在坐标轴上添加角度约束! - + Select two edges from the sketch. 从草图选择两条边. - - + + Select two or more compatible edges 选择两个或多个兼容边 - + Sketch axes cannot be used in equality constraints 草图轴无法用于相等约束 - + Equality for B-spline edge currently unsupported. 目前不支持 B-样条边缘的等值约束。 - - + + Select two or more edges of similar type 选择两个或多个同类型边 - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 请从草图中选取2个点及对称线, 2个点及对称点或1条线及1对称点。 - - - - + + + + Cannot add a symmetry constraint between a line and its end points! 无法在直线及其端点间添加对称约束! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 选取线段的两个端点做为射线，以及一条边缘做为边界，先选的点会编号为n1，后选的点则编号为n2，基准值设定为n2/n1。 - + Selected objects are not just geometry from one sketch. 选取的物件并非来自于草图的几何形状。 - + Number of selected objects is not 3 (is %1). 选定对象的数目不是 3 (是 %1)。 - + Cannot create constraint with external geometry only!! 无法仅通过外部几何图形创建约束 - + Incompatible geometry is selected! 选取了不相容的几何图形! - + SnellsLaw on B-spline edge currently unsupported. 当前不支持B样条曲线边缘上的斯涅尔折射定律。 - - + + Select at least one ellipse and one edge from the sketch. 从草图中至少选择一个椭圆和一个边。 - + Sketch axes cannot be used in internal alignment constraint 草图轴线不能被用作内部的对齐约束。 - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. 不能将一个椭圆约束在另一个椭圆内。只能选择一个椭圆。 - - + + Maximum 2 points are supported. 支持最大 2 个点。 - - + + Maximum 2 lines are supported. 支持最大 2条直线。 - - + + Nothing to constrain 无可约束元素 - + Currently all internal geometry of the ellipse is already exposed. 目前椭圆的所有内部几何都已显示。 - - - - + + + + Extra elements 额外的元素 - - - + + + More elements than possible for the given ellipse were provided. These were ignored. 超过设定椭圆所允许的元素。这些会被忽略。 - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. 您无法将一椭圆之孤与另一椭圆之弧设定内部约束，请仅选择单一椭圆之弧。 - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. 您无法将一椭圆与另一椭圆之弧设定内部约束，请仅选择单一椭圆或椭圆之弧。 - + Currently all internal geometry of the arc of ellipse is already exposed. 目前所有椭圆弧之内部几何图形都已显示。 - + More elements than possible for the given arc of ellipse were provided. These were ignored. 超过设定椭圆之弧所须之元素，这些会被忽略。 - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. 目前内部几何仅支持椭圆或椭圆之弧，最后一个选定的元素必须是椭圆或椭圆之弧。 - - - - - + + + + + @@ -2806,7 +2806,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 从草图中选择约束。 - + CAD Kernel Error CAD 内核错误 @@ -2941,42 +2941,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. 复制会导致循环依赖。 - + This object is in another document. 此对象在另一个文档中。 - + This object belongs to another body. Hold Ctrl to allow cross-references. 此对象属于另一个实体。按住 ctrl 键，允许交叉引用。 - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. 此对象属于另一个实体且它包含外部几何图形。不允许交叉引用。 - + This object belongs to another part. 此对象属于另一个零件。 - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. 所选草图与此草图不平行。按住 Ctrl + Alt 以允许不平行的草图。 - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. 所选草绘的 XY 轴与此草绘的方向不相同。按住 Ctrl + Alt 可忽略它。 - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. 所选草图的原点与此草图的原点不对齐。按住 Ctrl + Alt 以忽略此情况。 @@ -3062,8 +3062,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 插入半径 - - + + Radius: 半径: @@ -3074,8 +3074,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 插入直径 - - + + Diameter: 直径: @@ -3103,24 +3103,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 长度: - - + + Change radius 更改半径 - - + + Change diameter 更改直径 - + Refractive index ratio 折射率比 - + Ratio n2/n1: 比例 n2/n1: @@ -3136,22 +3136,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. 链接至此将导致循环依赖。 - + This object is in another document. 此对象在另一个文档中。 - + This object belongs to another body, can't link. 此对象属于另一个正文, 无法链接。 - + This object belongs to another part, can't link. 此对象属于另一个零件, 无法链接。 @@ -3192,8 +3192,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed 未命名 @@ -3386,7 +3386,7 @@ reflected on copies Show section 'Advanced solver control' in task dialog - Show section 'Advanced solver control' in task dialog + 在任务对话框中显示“高级解析器控制”段 @@ -3408,7 +3408,7 @@ Requires to re-enter edit mode to take effect. New constraints that would be redundant will automatically be removed - New constraints that would be redundant will automatically be removed + 多余的新约束将会被自动删除 @@ -3521,7 +3521,7 @@ Requires to re-enter edit mode to take effect. Color used while new sketch elements are created - Color used while new sketch elements are created + 创建新草图元素时使用的颜色 @@ -3581,7 +3581,7 @@ Requires to re-enter edit mode to take effect. Color of the datum portion of a driving constraint - Color of the datum portion of a driving constraint + 驱动约束的基准部分的颜色 @@ -3650,7 +3650,7 @@ Requires to re-enter edit mode to take effect. A dialog will pop up to input a value for new dimensional constraints - A dialog will pop up to input a value for new dimensional constraints + 将弹出对话框以输入新的尺寸约束的值 @@ -3665,17 +3665,17 @@ Requires to re-enter edit mode to take effect. Current constraint creation tool will remain active after creation - Current constraint creation tool will remain active after creation + 当前约束创建工具创建后将保持激活 Constraint creation "Continue Mode" - Constraint creation "Continue Mode" + 约束创建 "继续模式" Line pattern used for grid lines - Line pattern used for grid lines + 用于网格线的线型 @@ -3702,7 +3702,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When opening sketch, hide all features that depend on it - When opening sketch, hide all features that depend on it + 当打开草图时，隐藏依赖于它的所有特征 @@ -3909,6 +3909,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. 所有与外部几何有关的约束都将被删除。 + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4255,70 +4275,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< 草图编辑器校验 - + Invalid constraints 无效的约束 - - + + + Fix 修正 - - + + + Find 查找 - + Delete constraints to external geom. 删除外部几何元素的拘束。 - + Missing coincidences 未一致 - + Tolerance: 公差: - + Highlight open vertexes 高亮显示未封闭顶点 - + Ignore construction geometry 忽略辅助几何 + Degenerated geometry + Degenerated geometry + + + Reversed external geometry 反向的外部几何 - + Swap endpoints in constraints 互换约束中的端点 - + Constraint orientation locking 约束方向锁定 - + Enable/Update 启用/更新 - + Disable 禁用 @@ -4326,104 +4353,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch 编辑草绘 - + A dialog is already open in the task panel 一个对话框已在任务面板打开 - + Do you want to close this dialog? 您要关闭此对话框吗? - + Invalid sketch 无效的草图 - + Do you want to open the sketch validation tool? 你想打开草图验证工具么？ - + The sketch is invalid and cannot be edited. 该草图不可用并不可编辑。 - + Please remove the following constraint: 请删除以下约束: - + Please remove at least one of the following constraints: 请至少删除以下约束之一: - + Please remove the following redundant constraint: 请删除以下冗余约束: - + Please remove the following redundant constraints: 请删除以下冗余约束: - + Empty sketch 空草图 - + Over-constrained sketch 过度约束的草图 - - - + + + (click to select) (单击选取) - + Sketch contains conflicting constraints 草图包含相互冲突的约束 - + Sketch contains redundant constraints 草图包含冗余约束 - + Fully constrained sketch 完全约束的草图 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec 解算%1秒 - + Unsolved (%1 sec) 未解算(%1秒) @@ -4512,8 +4539,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 固定圆或圆弧的直径 @@ -4521,8 +4548,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 固定圆或圆弧的半径 @@ -4539,8 +4566,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc 通过端点和圆弧上的一点创建一个圆弧 @@ -4548,8 +4575,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points 通过三个边缘点创建圆 @@ -4557,8 +4584,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points 通过圆心和端点创建一个圆弧 @@ -4566,8 +4593,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints 通过中心点、长半径和端点创建椭圆弧 @@ -4575,8 +4602,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints 以中心, 主半径及终点建立双曲线弧 @@ -4584,8 +4611,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints 以焦点，顶点，端点创建抛物线弧 @@ -4593,13 +4620,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points 由控制点生成的B 样条 - - + + Create a B-spline by control points 由控制点创建 B 样条 @@ -4607,8 +4634,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point 通过圆心和一个边缘点创建一个圆 @@ -4616,8 +4643,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius 通过近拱点、远拱点和小半径创建一个椭圆 @@ -4625,8 +4652,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point 通过中心点、大半径和点创建一个椭圆 @@ -4634,8 +4661,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner 通过中心点和一个角创建一个七边形 @@ -4643,8 +4670,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner 通过中心点和一个角创建一个六边形 @@ -4652,14 +4679,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner 通过中心点和一个角创建一个八边形 - - + + Create a regular polygon by its center and by one corner 通过中心点和一个角创建一个正方形 @@ -4667,8 +4694,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner 通过中心点和一个角创建一个五边形 @@ -4676,8 +4703,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner 通过中心点和一个角创建一个正方形 @@ -4685,8 +4712,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner 通过中心点和一个角创建一个等边三角形 @@ -4694,13 +4721,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points 周期 B 样条的控制点 - - + + Create a periodic B-spline by control points 由控制点创建周期 B 样条 @@ -4826,7 +4853,7 @@ Do you want to detach it from the support? New constraints that would be redundant will automatically be removed - New constraints that would be redundant will automatically be removed + 多余的新约束将会被自动删除 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm index 4e46b4c837..3f10cf23f3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index fd27e83898..86494d392e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher Sketcher - + CarbonCopy 輪廓複製 - + Copies the geometry of another sketch 從其它草圖複製幾何圖元 @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher Sketcher - + Constrain arc or circle 約束弧或圓的直/半徑 - + Constrain an arc or a circle 約束單一圓弧或圓的直/半徑 - + Constrain radius 半徑拘束 - + Constrain diameter 直徑拘束 @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher Sketcher - + Create arc 建立弧線 - + Create an arc in the sketcher 於草圖中建立一個弧 - + Center and end points 圓心和起/終點定弧 - + End points and rim point 3點定弧 @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher Sketcher - + Create a B-spline 建立B型不規則曲線 - + Create a B-spline in the sketch 在草圖中建立B型不規則曲線 @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher Sketcher - + Create circle 建立圓 - + Create a circle in the sketcher 於草圖中建立一個圓 - + Center and rim point 圓心及半徑定圓 - + 3 rim points 3點建立圓 @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher Sketcher - + Create a conic 建立圓錐 - + Create a conic in the sketch 於草圖中建立圓錐 - + Ellipse by center, major radius, point 由圓心及長短軸來建立橢圓 - + Ellipse by Periapsis, apoapsis, minor radius 由近心點、遠心點及次半徑建立橢圓 - + Arc of ellipse by center, major radius, endpoints 以圓心，長軸中點，起/終點建立橢圓弧 - + Arc of hyperbola by center, major radius, endpoints 以中心,主要半徑及終點建立雙曲線弧 - + Arc of parabola by focus, vertex, endpoints 由焦點/頂點/端點 建立拋物線弧 @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 建立正多邊形 - + Create a regular polygon in the sketcher 於草圖中建立正多邊形 - + Triangle 三角形 - + Square 正方形 - + Pentagon 五角形 - + Hexagon 六角形 - + Heptagon 七角形 - + Octagon 八角形 - + Regular Polygon 正多邊形 @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher - + Constrain angle 角度拘束 - + Fix the angle of a line or the angle between two lines 固定線之角度或兩線間角度 @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher Sketcher - + Constrain Block 定位拘束 - + Create a Block constraint on the selected item 在選擇的圖元上套用定位拘束 @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher - + Constrain coincident 共點拘束 - + Create a coincident constraint on the selected item 於所選項目建立共點拘束 @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher Sketcher - + Constrain diameter 直徑拘束 - + Fix the diameter of a circle or an arc 固定一個圓或弧的直徑 @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher Sketcher - + Constrain distance 距離拘束 - + Fix a length of a line or the distance between a line and a vertex 固定線長或線與頂點間距 @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends 固定兩點或線段的水平距離 @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends 固定兩點或線段的垂直距離 @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher - + Constrain equal 相等拘束 - + Create an equality constraint between two lines or between circles and arcs 於兩線/圓/弧之間建立等長拘束 @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher - + Constrain horizontally 水平拘束 - + Create a horizontal constraint on the selected item 於所選項目建立水平拘束 @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher - + Constrain InternalAlignment 內部配置拘束 - + Constrains an element to be aligned with the internal geometry of another element 必須與另一個元素的內部幾何對其才可對元素進行拘束設定 @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher Sketcher - + Constrain lock 鎖定拘束 - + Create a lock constraint on the selected item 於選定項目建立鎖定拘束 @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher - + Constrain parallel 平行拘束 - + Create a parallel constraint between two lines 於兩條線間建立平行拘束 @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher Sketcher - + Constrain perpendicular 垂直拘束 - + Create a perpendicular constraint between two lines 於兩條線間建立垂直拘束 @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher - + Constrain point onto object 拘束點於物件上 - + Fix a point onto an object 固定點於物件上 @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher - + Constrain radius 半徑拘束 - + Fix the radius of a circle or an arc 固定圓或弧之半徑 @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher - + Constrain refraction (Snell's law') 折射拘束(司乃耳定律) - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. 建立一個以兩點作為光線方向，並以一邊做為交界面的折射拘束(司乃耳定律) @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher Sketcher - + Constrain symmetrical 對稱拘束 - + Create a symmetry constraint between two points with respect to a line or a third point 於兩個點間藉由一條線或第3點建立一個對稱拘束 @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher - + Constrain tangent 相切拘束 - + Create a tangent constraint between two entities 於兩個實體間建立相切拘束 @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher - + Constrain vertically 垂直拘束 - + Create a vertical constraint on the selected item 於所選項目建立垂直拘束 @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher Sketcher - + Create arc by three points 3點建立弧 - + Create an arc by its end points and a point along the arc 由終點及弧上一點建立一個弧 @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher Sketcher - + Create circle by three points 3點建立圓 - + Create a circle by 3 perimeter points 3邊緣點建立圓 @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher Sketcher - + Create arc by center 由中心點建立弧 - + Create an arc by its center and by its end points 由中心點及其終點建立一個弧 @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher Sketcher - + Create an arc of ellipse 建立橢圓之弧 - + Create an arc of ellipse in the sketch 於草圖建立橢圓之弧 @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher Sketcher - + Create an arc of hyperbola 建立雙曲線弧 - + Create an arc of hyperbola in the sketch 於草圖中建立雙曲線弧 @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher Sketcher - + Create an arc of parabola 建立拋物線弧 - + Create an arc of parabola in the sketch 於草圖中建立拋物線弧 @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher Sketcher - + Create B-spline 建立B型不規則曲線 - + Create a B-spline via control points in the sketch. 由草圖中的控制點建立B型不規則曲線 @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher Sketcher - + Create circle 建立圓 - + Create a circle in the sketch 於草圖中建立圓形 @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher Sketcher - + Create draft line 建立分模線 - + Create a draft line in the sketch 於草圖中建立分模線 @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher Sketcher - + Create ellipse by 3 points 由3點建立一橢圓 - + Create an ellipse by 3 points in the sketch 於草圖中由3點建立一橢圓 @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher Sketcher - + Create ellipse by center 由中心點建立橢圓 - + Create an ellipse by center in the sketch 於草圖中由中心點建立橢圓 @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher Sketcher - + Create fillet 建立圓角 - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher Sketcher - + Create heptagon 建立七角形 - + Create a heptagon in the sketch 於草圖中建立七角形 @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher Sketcher - + Create hexagon 建立六角形 - + Create a hexagon in the sketch 於草圖中建立六角形 @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher Sketcher - + Create line 建立線 - + Create a line in the sketch 於草圖中建立線 @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher Sketcher - + Create octagon 建立八角形 - + Create an octagon in the sketch 於草圖中建立八角形 @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher Sketcher - + Create pentagon 建立五角形 - + Create a pentagon in the sketch 於草圖中建立五角形 @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher Sketcher - + Create periodic B-spline 建立閉合的B型不規則曲線 - + Create a periodic B-spline via control points in the sketch. 由草圖中的控制點建立封閉的B型不規則曲線 @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher Sketcher - + Create point 建立點 - + Create a point in the sketch 於草圖中建立點 @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher Sketcher - + Create polyline 建立聚合線 - + Create a polyline in the sketch. 'M' Key cycles behaviour 於草圖中建立聚合線,「M」鍵可循環切換 @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher Sketcher - + Create rectangle 建立矩型 - + Create a rectangle in the sketch 於草圖中建立矩形 @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher Sketcher - + Create regular polygon 建立正多邊形 - + Create a regular polygon in the sketch 於草圖中建立正多邊形 @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher Sketcher - + Create slot 建立跑道圖型 - + Create a slot in the sketch 於草圖中建立跑道圖型 @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher Sketcher - + Create square 建立正方形 - + Create a square in the sketch 於草圖中建立正方形 @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher Sketcher - + Create text 建立文字 - + Create text in the sketch 於草圖中建立文字 @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher Sketcher - + Create equilateral triangle 建立正三角形 - + Create an equilateral triangle in the sketch 於草圖中建立正三角形 @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher Sketcher - + Extend edge 延伸圖元 - + Extend an edge with respect to the picked position 將圖元延伸到選取位置 @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher Sketcher - + External geometry 外部幾何 - + Create an edge linked to an external geometry 與外部幾何建立相連之邊 @@ -1781,17 +1781,17 @@ CmdSketcherToggleActiveConstraint - + Sketcher Sketcher - + Toggle activate/deactivate constraint Toggle activate/deactivate constraint - + Toggles activate/deactivate state for selected constraints Toggles activate/deactivate state for selected constraints @@ -1817,17 +1817,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher Sketcher - + Toggle reference/driving constraint 拘束於參考及一般模式切換 - + Toggles the toolbar or selected constraints to/from reference mode 將工具列或是所選之拘束於參考及一般模式間切換 @@ -1835,17 +1835,17 @@ CmdSketcherTrimming - + Sketcher Sketcher - + Trim edge 修剪邊 - + Trim an edge with respect to the picked position 依選取位置修剪邊 @@ -1952,47 +1952,47 @@ 自動拘束錯誤: 套用對稱拘束後無法解出此草圖 - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. 此版本的 OCE/OCC 並不支援控制點操作。你需要6.9.0版或更新的版本。 - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2061,110 +2061,110 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2201,10 +2201,10 @@ 由草圖選取邊 - - - - + + + + Dimensional constraint 尺度拘束 @@ -2232,273 +2232,273 @@ 所選中已有於草圖上者 - - + + Select an edge from the sketch. 於草圖中選擇邊 - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - Impossible constraint 無法拘束 - - - - + + + + The selected edge is not a line segment 所選之邊非為線段 - - - - - - + + + + + + Double constraint 雙重拘束 - - - - + + + + The selected edge already has a horizontal constraint! 選取的邊線已經有水平拘束! - - - - + + + + The selected edge already has a vertical constraint! 選取的邊線已經有垂直拘束! - - - - - - + + + + + + The selected edge already has a Block constraint! 所選邊線已套用定位拘束! - + The selected item(s) can't accept a horizontal constraint! 所選項目無法使用水平拘束! - + There are more than one fixed point selected. Select a maximum of one fixed point! 選取超過一個固定點. 請選取最多一個固定點! - + The selected item(s) can't accept a vertical constraint! 所選項目無法使用垂直拘束! - + There are more than one fixed points selected. Select a maximum of one fixed point! 選取超過一個固定點. 請選取最多一個固定點! - - + + Select vertices from the sketch. 從草圖中選取頂點 - + Select one vertex from the sketch other than the origin. 從草圖中選取一個非原點之頂點 - + Select only vertices from the sketch. The last selected vertex may be the origin. 從草圖中只選擇端點。 最後選擇的頂點可能是原點。 - + Wrong solver status 求解器狀態錯誤 - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. 如果草圖中的求解器無法解出或存在多餘(過度)、衝突的約束，則不能再添加定位約束。 - + Select one edge from the sketch. 從草圖中選取一邊線 - + Select only edges from the sketch. 僅有邊線能從草圖中被選取 - - - - - - - + + + + + + + Error 錯誤 - + Select two or more points from the sketch. 從草圖中選取二個或更多點 - - + + Select two or more vertexes from the sketch. 從草圖中選取兩個或更多頂點。 - - + + Constraint Substitution 拘束替換 - + Endpoint to endpoint tangency was applied instead. 已被取代為終點對終點相切 - + Select vertexes from the sketch. 由草圖中選取頂點。 - - + + Select exactly one line or one point and one line or two points from the sketch. 由草圖中選取一條線或一個點,以及一條線或兩個點。 - + Cannot add a length constraint on an axis! 無法於軸上增加長度拘束! - + This constraint does not make sense for non-linear curves 此拘束條件在非線性曲線上並不合理 - - - - - - + + + + + + Select the right things from the sketch. 從草圖中選取正確的圖元 - - + + Point on B-spline edge currently unsupported. 目前並未支援端點到B型不規則曲線的共點拘束 - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 於個別的曲線上無所選的點被拘束，可能因為他們是在同一元素上的一部分，或是他們都是外部幾何。 - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. 選取一點及數條曲線，或是一條曲線及數個點。您已選取 %1 條曲線及 %2 個點。 - - - - + + + + Select exactly one line or up to two points from the sketch. 於草圖中選取一條線或最多兩個點。 - + Cannot add a horizontal length constraint on an axis! 無法於軸上增加水平長度拘束! - + Cannot add a fixed x-coordinate constraint on the origin point! 在原點上無法加入固定X軸拘束! - - + + This constraint only makes sense on a line segment or a pair of points 此拘束僅在線段或一對點上才有意義 - + Cannot add a vertical length constraint on an axis! 無法於軸上增加垂直長度拘束! - + Cannot add a fixed y-coordinate constraint on the origin point! 在原點上無法加入固定Y軸拘束! - + Select two or more lines from the sketch. 由草圖中選取兩條或以上線條。 - - + + Select at least two lines from the sketch. 由草圖中選取至少兩條線。 - + Select a valid line 選取有效線條 - - + + The selected edge is not a valid line 所選之邊非為有效線段 - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2506,45 +2506,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 此拘束尚有許多方式可以使用，可用的組合有：兩條曲線、兩個端點、兩條曲線及一個點。 - + Select some geometry from the sketch. perpendicular constraint 從草圖中選取一些幾何。 - + Wrong number of selected objects! perpendicular constraint 選取之物件數量有誤! - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint 三個物件時至少需有2條曲線及1個點。 - - + + Cannot add a perpendicularity constraint at an unconnected point! 無法於未連接點上建立垂直拘束! - - - + + + Perpendicular to B-spline edge currently unsupported. B型不規則曲線的邊線目前並不支援垂直拘束 - - + + One of the selected edges should be a line. 所選之邊中需有一條線。 - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2554,249 +2554,249 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可接受的組合：二條曲線; 一個終止點及一條曲線；二個終主點；二條曲線及一點。 - + Select some geometry from the sketch. tangent constraint 從草圖中選取一些幾何。 - + Wrong number of selected objects! tangent constraint 選取之物件數量有誤! - - - + + + Cannot add a tangency constraint at an unconnected point! 無法於未連接點上建立相切拘束! - - - + + + Tangency to B-spline edge currently unsupported. B型不規則曲線的邊線目前並不支援相切拘束 - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 已套用點對點相切拘束，共點拘束已被刪除 - - - - + + + + Select one or more arcs or circles from the sketch. 從草圖中選取一個或多個弧或圓。 - - + + Constrain equal 相等拘束 - + Do you want to share the same radius for all selected elements? 您要將所有選取的元素都使用相同的半徑嗎? - - + + Constraint only applies to arcs or circles. 拘束僅能用在圓弧或圓上 - + Do you want to share the same diameter for all selected elements? 請問您要在所有選定的圖元上套用相同直徑嗎? - - + + Select one or two lines from the sketch. Or select two edges and a point. 從草圖中選取一或兩條線條，或選取兩個邊及一個點。 - - + + Parallel lines 平行線 - - + + An angle constraint cannot be set for two parallel lines. 無法於兩條平行線間建立角度拘束。 - + Cannot add an angle constraint on an axis! 無法於軸上建立角度拘束! - + Select two edges from the sketch. 由草圖中選取兩個邊。 - - + + Select two or more compatible edges 選擇兩個或更多相容之邊 - + Sketch axes cannot be used in equality constraints 草圖中心線無法使用相等拘束 - + Equality for B-spline edge currently unsupported. 不支援B型不規則曲線的等長拘束。 - - + + Select two or more edges of similar type 選取兩個或更多相似類型之邊 - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 請從草圖中選取兩個點及對稱線,兩個點及對稱點或一條線擊對稱點。 - - - - + + + + Cannot add a symmetry constraint between a line and its end points! 無法於線及其終點建立對稱拘束! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 選取線段之兩個端點做為光線，以及一個邊緣做為邊界，先選的點會編號為n1，後選的點則編號為n2，基準值設定為n2/n1。 - + Selected objects are not just geometry from one sketch. 選取之物件並非來自於草圖之幾何。 - + Number of selected objects is not 3 (is %1). 選取之物件數量非為3 (而是 %1). - + Cannot create constraint with external geometry only!! 僅用外部幾何無法建立拘束!! - + Incompatible geometry is selected! 選取了不相容的幾何! - + SnellsLaw on B-spline edge currently unsupported. 目前不支援將折射定律拘束套用到B型不規則曲線上 - - + + Select at least one ellipse and one edge from the sketch. 至少由草圖中選取一個橢圓及一個邊。 - + Sketch axes cannot be used in internal alignment constraint 草圖軸無法做為內部對齊拘束 - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. 你不能在二個橢圓上，使用內部對齊拘束。請選擇單一個橢圓。 - - + + Maximum 2 points are supported. 最多支援2點。 - - + + Maximum 2 lines are supported. 最多支援2線段 - - + + Nothing to constrain 沒有要加以拘束的圖元 - + Currently all internal geometry of the ellipse is already exposed. 目前橢圓之所有內部幾何都已顯示。 - - - - + + + + Extra elements 額外的元素 - - - + + + More elements than possible for the given ellipse were provided. These were ignored. 超過設定橢圓所許之元素，這些會被忽略。 - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. 你不能在二個橢圓弧間，使用內部對齊拘束。請選擇單一個橢圓弧。 - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. 你不能在二個橢圓弧間，使用內部對齊拘束。請選擇單一個橢圓或橢圓弧。 - + Currently all internal geometry of the arc of ellipse is already exposed. 目前所有橢圓弧之內部幾何都已顯示。 - + More elements than possible for the given arc of ellipse were provided. These were ignored. 超過設定橢圓之弧所須之元素，這些會被忽略。 - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. 目前內部幾何僅支援橢圓或橢圓之弧，最後一個選定的元素必須是橢圓或橢圓之弧。 - - - - - + + + + + @@ -2804,7 +2804,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 從草圖中選取拘束 - + CAD Kernel Error CAD核心錯誤 @@ -2939,42 +2939,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. 輪廓複製將導致循環參照 - + This object is in another document. 此物件存在於其他檔案中 - + This object belongs to another body. Hold Ctrl to allow cross-references. 此物件屬於另一個實體。按下不放 Ctrl 鍵以允許交互參照 - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. 此物件屬於另一個實體，並且包含外部幾何。交互參照不被允許 - + This object belongs to another part. 此物件屬於另一零件 - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. 所選草圖與此草圖並不平行。按下不放 Ctrl+Alt 以允許非平行草圖 - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. 所選草圖的XY軸與此草圖的方向不同。按住Ctrl + Alt 以忽略它 - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. 所選草圖的原點與此草圖的原點不對齊。 按住Ctrl + Alt以忽略它 @@ -3060,8 +3060,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 輸入半徑 - - + + Radius: 半徑： @@ -3072,8 +3072,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 插入直徑 - - + + Diameter: Diameter: @@ -3101,24 +3101,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 長度： - - + + Change radius 修改半徑 - - + + Change diameter 改變直徑 - + Refractive index ratio 折射率比例 - + Ratio n2/n1: 比例 n2/n1： @@ -3134,22 +3134,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. 此連結將導致循環參照。 - + This object is in another document. 此物件存在於其他檔案中 - + This object belongs to another body, can't link. 此物件屬於另一實體。無法建立連結。 - + This object belongs to another part, can't link. 此物件屬於另一零件。無法建立連結。 @@ -3190,8 +3190,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::PropertyConstraintListItem - - + + Unnamed 未命名 @@ -3905,6 +3905,26 @@ However, no constraints linking to the endpoints were found. All constraints that deal with external geometry were deleted. 所有與外部幾何有關的拘束都將被刪除。 + + + No degenerated geometry + No degenerated geometry + + + + No degenerated geometry found + No degenerated geometry found + + + + Degenerated geometry + Degenerated geometry + + + + %1 degenerated geometry found + %1 degenerated geometry found + SketcherGui::TaskSketcherConstrains @@ -4251,70 +4271,77 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< 草圖編輯器檢查 - + Invalid constraints 錯誤之拘束 - - + + + Fix 修正 - - + + + Find 發現 - + Delete constraints to external geom. 刪除外部幾何之拘束。 - + Missing coincidences 未一致 - + Tolerance: 公差： - + Highlight open vertexes 標示未封閉頂點 - + Ignore construction geometry Ignore construction geometry + Degenerated geometry + Degenerated geometry + + + Reversed external geometry 反向之外部幾何 - + Swap endpoints in constraints 互換拘束中的端點 - + Constraint orientation locking 已鎖定拘束之方向 - + Enable/Update 啟用/更新 - + Disable 停用 @@ -4322,104 +4349,104 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch 編輯草圖 - + A dialog is already open in the task panel 於工作面板已開啟對話窗 - + Do you want to close this dialog? 您確定要關閉此對話窗嗎? - + Invalid sketch 錯誤之草圖 - + Do you want to open the sketch validation tool? 您要開啟草圖驗證工具嗎? - + The sketch is invalid and cannot be edited. 此為無效且不能編輯之草圖 - + Please remove the following constraint: 請移除下列拘束： - + Please remove at least one of the following constraints: 請移除下列至少一個拘束： - + Please remove the following redundant constraint: 請移除下列多餘拘束： - + Please remove the following redundant constraints: 請移除下列多餘拘束： - + Empty sketch 空白草圖 - + Over-constrained sketch 過度約束的草圖 - - - + + + (click to select) (按一下可選擇) - + Sketch contains conflicting constraints 此草圖含有相矛盾之拘束 - + Sketch contains redundant constraints 此草圖含有過多的拘束 - + Fully constrained sketch 完全拘束之草圖 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom - + Solved in %1 sec 於%1秒求解完成 - + Unsolved (%1 sec) 未求解完成(%1秒) @@ -4508,8 +4535,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 固定一個圓或弧的直徑 @@ -4517,8 +4544,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 固定圓或弧之半徑 @@ -4535,8 +4562,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc 由終點及弧上一點建立一個弧 @@ -4544,8 +4571,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points 由3圓弧點建立一個圓 @@ -4553,8 +4580,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - - + + Create an arc by its center and by its end points 由中心點及其終點建立一個弧 @@ -4562,8 +4589,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints 由中心點、主半徑及終點來建立橢圓之弧 @@ -4571,8 +4598,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints 以中心,主要半徑及終點建立雙曲線弧 @@ -4580,8 +4607,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints Create an arc of parabola by its focus, vertex, endpoints @@ -4589,13 +4616,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points B-spline by control points - - + + Create a B-spline by control points Create a B-spline by control points @@ -4603,8 +4630,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point 由中心點及一個圓弧點建立一個圓 @@ -4612,8 +4639,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius 由近心點、遠心點及次半徑建立橢圓 @@ -4621,8 +4648,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point 由中心點、主半徑及終點來建立橢圓 @@ -4630,8 +4657,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner 以中心點及一角來建立七角形 @@ -4639,8 +4666,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner 以中心點及一角來建立六角形 @@ -4648,14 +4675,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner 以中心點及一角來建立八角形 - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -4663,8 +4690,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner 以中心點及一角來建立五角形 @@ -4672,8 +4699,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner 以中心點及一角來建立正方形 @@ -4681,8 +4708,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner 以中心點及一角來建立正三角形 @@ -4690,13 +4717,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points Periodic B-spline by control points - - + + Create a periodic B-spline by control points Create a periodic B-spline by control points diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm index ff2d176784..5deb88ea6f 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm index 41c5cce485..22659754e7 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ar.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.qm index bcf95311d5..0b8914888c 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm index 6f117e6c0e..b700b8945b 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts index d982bb7b43..97f3fc33be 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -362,7 +362,7 @@ Please select one cell only. Copy & Paste failed - Copy & Paste failed + Kopírování a vložení se nezdařilo Alias contains invalid characters! diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm index 60270acd89..eb9e02e78f 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_el.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_el.qm index 3829a96ad3..f29b67dd85 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_el.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_el.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm index ff66d003a2..e6ec2c4589 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm index 1fe5f76ec2..45bc9478a3 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm index 784f6d562f..6eea5b4153 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fil.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fil.qm index 3efb18fb47..ad53f54b65 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fil.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fil.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm index 97784ea173..d48095500e 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm index f564626462..992a148af3 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_gl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm index 325a6628c5..6485b08cf7 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm index 8bba283f5d..5b593111c6 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.qm index f96142d1ac..828a137d24 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm index 715abf83d2..a01ea71d92 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm index b04a16da73..375bbc500a 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_kab.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_kab.qm index 363a6eecf4..de429b794c 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_kab.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_kab.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ko.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ko.qm index ded0678ce1..9ac0321c01 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ko.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ko.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_lt.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_lt.qm index 5f93fe67e4..225d2ab1d2 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_lt.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_lt.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm index f636d54799..b718f626fd 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm index 2b7b636029..45bc5573a0 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm index 0b9624bfec..935ef030ba 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm index 581c1912ea..dde9644c2c 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm index 8b0b0742f7..e312114e71 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm index b54fc2c9f6..970f4ada82 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm index fb2d5b9656..81cdd1b0f7 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sk.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sk.qm index 99052c306a..b2a3712d14 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sk.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sk.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm index 4158aec17a..79cdc81500 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts index 83580f8a15..c292290977 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts @@ -357,22 +357,21 @@ Spreadsheet does not support range selection when pasting. Please select one cell only. - Spreadsheet does not support range selection when pasting. -Please select one cell only. + Preglednica pri lepljenju na podpira obsegovnega izbora. Copy & Paste failed - Copy & Paste failed + Kopiranje in Lepljenje spodletelo Alias contains invalid characters! - Alias contains invalid characters! + Vzdevek vsebuje neveljavne znake! Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Na celico se sklicuj z vzdevkom, npr. +Preglednica.ime_ki_sem_ga_določil namesto Preglednica.B1 @@ -458,17 +457,17 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 &Content: - &Content: + &Vsebina: &Alias: - &Alias: + &Vzdevek: Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Na celico se sklicuj z vzdevkom, npr. +Preglednica.ime_ki_sem_ga_določil namesto Preglednica.B1 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm index 9bd5370025..5094ed2ef5 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm index 7faa3bea87..b8a5a03143 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm index 6f8e0b1a5f..c58c0e454f 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts index 3d31ffed95..8ce95f23c5 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts @@ -366,13 +366,12 @@ Lütfen yalnızca bir hücre seçin. Alias contains invalid characters! - Alias contains invalid characters! + Alias geçersiz karakterler içeriyor! Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Hücreye alias'lı bir isim atayın, örneğin Spreadsheet.B1 yerine Spreadsheet.my_alias_name @@ -458,17 +457,16 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 &Content: - &Content: + &İçerik: &Alias: - &Alias: + &Alias: Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Hücreye alias'lı bir isim atayın, örneğin Spreadsheet.B1 yerine Spreadsheet.my_alias_name diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm index e8e902725c..cac8a65c03 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm index 4159100437..fd8cb47cf9 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_val-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_vi.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_vi.qm index da30a24b0e..dc73d52f3c 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_vi.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_vi.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm index c49db2bb97..9a9888c10f 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm index 6486e8beae..2b25654635 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm index 209787f01a..9567fd1ce4 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ar.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ar.qm index a20b2ba3ed..bf9284504b 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ar.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ar.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ca.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ca.qm index 0afe2ca0e2..15acd2d530 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ca.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ca.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm index 6bbbb0b5f7..b8380e34ac 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm index cdb6916e65..531a6b4304 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts index 6eece8eb86..681cc33582 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts @@ -82,7 +82,7 @@ Wie Sie FreeCAD selbst kompilieren können, der FreeCAD-Quellcode strukturiert i Manual - Dokumentation + Anleitung diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_el.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_el.qm index e9371f6ccd..3b73b17c9e 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_el.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_el.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm index 90e91ed719..f42e642892 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm index ad8b04f18e..7f6da93226 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm index f44cc72ecd..928ff4b7f2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fil.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fil.qm index ee65c701a3..d7ad6040e6 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fil.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fil.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm index cb2e37d513..65335ce857 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm index f60f5c3d29..11d3ec67b1 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_gl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm index dcb80ce7ba..405b58fa4d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm index 40c067ae65..3517c98594 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_id.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_id.qm index b63f274529..e6fc541810 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_id.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_id.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm index 43a1262224..e4b4f5f605 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm index 207279818c..2314b423f2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_kab.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_kab.qm index e0fa362529..b4cd1d7525 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_kab.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_kab.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm index c4ecd66fc8..6130ec4ff2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_lt.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_lt.qm index 406d72746f..6476e30389 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_lt.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_lt.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm index 53c956a705..624bf1fcfd 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm index cf9ae598d5..6f8f75187d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts index 809b803e9e..0cb6a7dc39 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts @@ -411,7 +411,7 @@ Font family - Font family + Skrift familie diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm index 3aa898ffef..cc3820b5ac 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm index b97f8af7e0..18adf89e05 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm index 37cfa271b7..6d214dbf9d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm index e5257d8101..98a2e058ca 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm index 6fc77e644d..86d40b5419 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sk.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sk.qm index d2b45b8abd..820f8fc4ab 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sk.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sk.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sk.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sk.ts index ea05aca4b1..dbf563cfe6 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sk.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sk.ts @@ -36,7 +36,7 @@ Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list + Nastaviť počet posledných súborov zobrazených v menu Upraviť -> Preferencie -> Hlavné -> -> Preferences -> General -> Size of recent file listeľkosť posledného zoznamu súborov @@ -51,7 +51,7 @@ User hub - User hub + Používateľský uzol @@ -71,7 +71,7 @@ Developers hub - Developers hub + Developerský uzol diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm index bb4ec8eabb..2c884983c7 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts index 0a49c07148..bc442aab10 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts @@ -36,7 +36,7 @@ Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - Prilagodi število tukaj prikazanih nedavnih datotek v meniju Uredi -> Možnosti -> Splošne nastavitve -> Velikost seznama nedavnih datotek + Prilagodi število tukaj prikazanih nedavnih datotek v meniju Uredi -> Prednastavitve -> Splošne nastavitve -> Velikost seznama nedavnih datotek @@ -156,7 +156,7 @@ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - Mapo po meri, ki bo prikazana tukaj, lahko nastavite v meniju Uredi -> Možnosti -> Začetek -> Prikaži dodatno mapo + Mapo po meri, ki bo prikazana tukaj, lahko nastavite v meniju Uredi -> Prednastavitve -> Začetek -> Prikaži dodatno mapo @@ -346,7 +346,7 @@ If this is checked, if a style sheet is specified in General preferences, it will be used and override the colors below - Če je to označeno in je seznam slogov določen v Splošnih nastavitvah, bo uporabljen in bo preglasil barve spodaj + Če je to označeno in je seznam slogov določen v Splošnih prednastavitvah, bo uporabljen in bo preglasil barve spodaj diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm index 8ea11cebf6..934dba5011 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm index 64764c3279..7e97e7bff2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm index 9e2a087f8b..f922abe06f 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm index 5a32cbce52..749d39de7f 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm index 0e414e0c94..c82c539075 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_val-ES.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_vi.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_vi.qm index d2a5c5dbed..b8c26fd4e1 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_vi.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_vi.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_vi.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_vi.ts index 526ec021dd..3def1cfcdb 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_vi.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_vi.ts @@ -36,7 +36,7 @@ Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list + 𝐍1𝐊7𝐁𝐍𝐕𝐏3𝐘𝐏6𝐇𝐑 diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm index 0d5d38af67..b44daa0068 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm index 769e3a4ac9..c77a4fe548 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm index 4f791782df..bf7e670b7c 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts index a1bd74b640..4b88f7e3f7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Voeg annotasie @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Verkeerde keuse @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Create a page first. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Voorkoms + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm index 72c4224881..76fb724eb4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts index 9a0f6d0dd1..7974b33c92 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection إختيار خاطئ @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection تحديد غير صحيح - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection لا يوجد أي عنصر ثلاثي الأبعاد في هذا الإختيار - + There are no 3D Edges or Vertices in your selection لا توجد أية حَوَافٍ ثلاثية الأبعاد أو قمم رؤوس في الإختيار الذي قمت به - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first قم بإختيار عنصراً أولا - + Too many objects selected تم تحديد عدد كبير جدا من العناصر - + Create a page first. قم بإنشاء صفحة أولا. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + عرض + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm index 4f09386276..1a398b3ca0 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 3aa6e4e3db..226c1f6592 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Afegeix vèrtex de punt central @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Afegeix vèrtexs de quadrant @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insereix una cota angular de 3 punts @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insereix una cota angular @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix Anotació @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix Línia Central - + Add Centerline to Faces Afegeix una línia central a les cares @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Lleva un objecte cosmètic @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afegeix un vèrtex cosmètic @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insereix un vèrtex cosmètic - + Add Cosmetic Vertex Afegeix un vèrtex cosmètic @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insereix una cota d'extensió - + Horizontal Extent Extensió horitzontal - + Vertical Extent Extensió vertical @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afegeix una línia central a les cares @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insereix una cota horitzontal @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insereix una cota d'extensió horitzontal @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insereix una cota de marca - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Afegeix un línia guia a la vista @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Enllaça una cota a una geometria 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afegeix vèrtex de punt central @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afegeix vèrtexs de quadrant @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insereix una anotació de text enriquit @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insereix una cota vertical @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insereix una cota d'extensió vertical @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afegeix la informació de soldadura a la línia guia @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Selecció incorrecta @@ -1144,26 +1157,20 @@ Obri les vistes de dibuix abans d'intentar l'exportació a SVG. - - - - - - - - + + + + + + + Incorrect Selection Selecció incorrecta - - - Can not make a Dimension from this selection - No es pot crear una dimensió d'aquesta selecció - @@ -1201,38 +1208,38 @@ L'aresta seleccionada és una BSpline. El diàmetre serà aproximat. Voleu continuar? - + Need two straight edges to make an Angle Dimension Es necessiten dues arestes rectes per a crear una cota d'angle - + Need three points to make a 3 point Angle Dimension Es necessiten 3 punts per a crear una cota d'angle de 3 punts - + There is no 3D object in your selection No hi ha cap objecte 3D en la selecció - + There are no 3D Edges or Vertices in your selection No hi ha cap aresta o vèrtex 3D en la selecció - - + + Please select a View [and Edges]. Seleccioneu una vista [i una aresta]. - + Select 2 point objects and 1 View. (1) Seleccioneu 2 objectes punt i una vista. (1) - + Select 2 point objects and 1 View. (2) Seleccioneu 2 objectes punt i una vista. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Seleccioneu primer un objecte - + Too many objects selected Hi ha masses objectes seleccionats - + Create a page first. Crear una pàgina primer. - + No View of a Part in selection. No hi ha cap vista d'una peça en la selecció. - + No Feature with Shape in selection. No hi ha cap propietat amb forma en la selecció. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tasca en procés - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Tanca el quadre de diàleg de tasques actiu i intenta-ho altra vegada. - - - - + + + + Selection Error Error de selecció - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Selecció incorrecta - + Can not attach leader. No base View selected. No es pot adjuntar la guia. No s'ha seleccionat cap vista de base. - - - + + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - - + + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - - - + + + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entès la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + No Part Views in this selection No hi ha cap vista de peça en la selecció - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte de la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edita un símbol de soldadura + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2064,18 +2109,18 @@ Then you need to increase the tile limit. Mostra les arestes de les seccions - + Maximum hatch line segments to use when hatching a face with a PAT pattern Nombre màxim de segments de tramat que s'han d'utilitzar en aplicar un tramat en una cara amb un patró PAT - + Line End Cap Shape Forma del cap de la línia - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2083,42 +2128,42 @@ can be a performance penalty in complex models. Si està marcada, TechDraw intentarà crear cares utilitzant els segments de línia retornats per l'algoritme d'eliminació de la línia oculta. S'han de detectar cares per a utilitzar el tramat, però en models complexos hi pot haver problemes de baix rendiment. - + Detect Faces Detecta les cares - + Include edges with unexpected geometry (zero length etc.) in results Inclou les arestes amb una geometria inesperada (longitud zero, etc.) en els resultats - + Allow Crazy Edges Permet arestes extravagants - + Max SVG Hatch Tiles Nombre màxim de mosaics de la trama SGV - + Max PAT Hatch Segments Nombre màxim de segments de la trama PAT - + Dimension Format Format de dimensió - + Override automatic dimension format Substitueix el format de dimensió automàtica - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3582,6 +3627,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description S'ha abandonat l'edició en procés. Torna a començar. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Veure + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4544,7 +4632,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -4552,7 +4640,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -4560,7 +4648,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insereix un vèrtex cosmètic en una vista @@ -4568,7 +4656,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afegeix una línia central a una cara @@ -4576,7 +4664,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insereix una cota d'extensió horitzontal @@ -4584,7 +4672,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insereix un vèrtex cosmètic en el punt central de les arestes seleccionades @@ -4592,7 +4680,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insereix un vèrtex cosmètic en els punts quadrants dels cercles seleccionats @@ -4600,7 +4688,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insereix una cota d'extensió vertical diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm index e80d5455c8..3371059cf5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 3262c521ca..0af0ae5e22 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -4,23 +4,23 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + Přidat osu mezi 2 přímky Cmd2PointCenterLine - + Add Centerline between 2 Points - Add Centerline between 2 Points + Přidat osu mezi 2 body CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,38 +36,51 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + Přidat osu mezi 2 přímky CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points - Add Centerline between 2 Points + Přidat osu mezi 2 body + + + + CmdTechDraw2PointCosmeticLine + + + TechDraw + TechDraw + + + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Vložit poznámku @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line - Insert Center Line + Vložit středovou osu - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -323,7 +336,7 @@ Export Page as DXF - Export Page as DXF + Exportovat stránku do DXF @@ -346,41 +359,41 @@ Export Page as SVG - Export Page as SVG + Exportovat stránku do SVG CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent - Horizontal Extent + Horizontální rozsah - + Vertical Extent - Vertical Extent + Vertikální rozsah CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -541,7 +554,7 @@ Insert Default Page - Insert Default Page + Vložit výchozí stránku @@ -554,17 +567,17 @@ Insert Page using Template - Insert Page using Template + Vložit stránku pomocí šablony Select a Template File - Select a Template File + Vybrat šablonu Template (*.svg *.dxf) - Template (*.svg *.dxf) + Šablona (*.svg *.dxf) @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -621,18 +634,18 @@ Redraw Page - Redraw Page + Překreslit stránku CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -749,7 +762,7 @@ Insert View - Insert View + Vložit zobrazení @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Neplatný výběr @@ -1144,26 +1157,20 @@ Otevřete zobrazení výkresu před exportem do SVG. - - - - - - - - + + + + + + + Incorrect Selection Nesprávný výběr - - - Can not make a Dimension from this selection - Na tomto výběru nelze sestrojit kótu - @@ -1201,38 +1208,38 @@ Vybraná hrana je BSplajn. Průměr bude přibližný. Pokračovat? - + Need two straight edges to make an Angle Dimension Pro úhlovou kótu jsou potřeba dvě rovné hrany - + Need three points to make a 3 point Angle Dimension Pro úhlovou kótu pomocí 3 bodů jsou potřeba tři body - + There is no 3D object in your selection Ve Vašem výběru není žádný 3D objekt - + There are no 3D Edges or Vertices in your selection Ve výběru nejsou žádné 3D hrany nebo vrcholy - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Nejprve vyberte objekt - + Too many objects selected Příliš mnoho vybraných objektů - + Create a page first. Vytvořte nejprve stránku. - + No View of a Part in selection. Ve výběru není zobrazení součásti. - + No Feature with Shape in selection. Ve výběru není tvarový prvek. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Probíhá úkol - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Zavřete aktivní dialog úkolů a zkuste to znovu. - - - - + + + + Selection Error Chyba výběru - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection - Wrong Selection + Chybný výběr - + Can not attach leader. No base View selected. Nelze připojit vedoucí objekt. Není vybrán základní pohled. - - - + + + + You must select a base View for the line. Pro čáru je nutno vybrat základní pohled. - - + + No DrawViewPart objects in this selection Ve výběru nejsou objekty DrawViewPart - - - - + + + + No base View in Selection. Ve výběru není základní pohled. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Není nic vybráno - + At least 1 object in selection is not a part view Minimálně 1 objekt ve výběru není součástí zobrazení dílu - + Unknown object type in selection Ve výběru je neznámý typ objektu @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Opravdu si přejete pokračovat? @@ -1610,7 +1645,7 @@ Edit Center Line - Edit Center Line + upravit osu @@ -1631,7 +1666,7 @@ Operation Failed - Operation Failed + Operace se nezdařila @@ -1643,15 +1678,25 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View - New Detail View + Nové detailní zobrazení Edit Detail View - Edit Detail View + Upravit detailní zobrazení @@ -1707,27 +1752,26 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Stránka není prázdná, následující referenční objekty budou možná ztraceny: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Skupinu nelze odstranit, protože její položky mají následující +sekce nebo detailní zobrazení, nebo vedoucí řádky, které by byly rozbity: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Skupina projekcí není prázdná, proto +mohou být ztraceny tyto odkazující objekty: The following referencing object might break: - The following referencing object might break: + Následující odkazující objekt se může rozbít: @@ -1767,7 +1811,7 @@ it has a tile weld that would become broken. Border - Border + Okraj @@ -1868,12 +1912,12 @@ the top and left view border Symbol - Symbol + Symbol Text above arrow side symbol - Text above arrow side symbol + Text nad šipkou @@ -1937,7 +1981,7 @@ at the kink in the leader line All Around - All Around + Všechno okolo @@ -1959,7 +2003,7 @@ This directory will be used for the symbol selection. *.svg - *.svg + *.svg @@ -1969,7 +2013,7 @@ This directory will be used for the symbol selection. Symbol Directory - Symbol Directory + Adresář symbolů @@ -1995,7 +2039,7 @@ Only change unless you know what you are doing! Round - Round + Kruh @@ -2067,19 +2111,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2134,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -2141,7 +2185,7 @@ can be a performance penalty in complex models. Center Line Style - Center Line Style + Styl osy @@ -2513,12 +2557,12 @@ can be a performance penalty in complex models. Centerline - Centerline + osa Centerline color - Centerline color + Barva osy @@ -2657,27 +2701,27 @@ can be a performance penalty in complex models. ⌀ - ⌀ + ⌀ Arrow Style - Arrow Style + Styl šipky Arrowhead style - Arrowhead style + Typ šipek Arrow Size - Arrow Size + Velikost šipky Arrowhead size - Arrowhead size + Velikost šipek @@ -2697,12 +2741,12 @@ can be a performance penalty in complex models. First - First + První Third - Third + Třetí @@ -2712,7 +2756,7 @@ can be a performance penalty in complex models. Hidden Line Style - Hidden Line Style + Režim skryté čáry @@ -2745,7 +2789,7 @@ can be a performance penalty in complex models. Drawing Update - Drawing Update + Aktualizace výkresu @@ -2796,37 +2840,37 @@ for ProjectionGroups Labels - Labels + Štítky Label Font - Label Font + Písmo štítku Label Size - Label Size + Velikost štítku Font for labels - Font for labels + Písmo pro štítky Label size - Label size + Velikost štítku Files - Files + Soubory Default Template - Default Template + Výchozí šablona @@ -3273,7 +3317,7 @@ Chcete pokračovat? Text: - Text: + Text: @@ -3283,7 +3327,7 @@ Chcete pokračovat? Text Color: - Text Color: + Barva textu: @@ -3595,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Ukončeno ve fázi úprav. Začněte znovu. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Pohled + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3961,7 +4048,7 @@ You can pick further points to get line segments. Lines - Lines + Čáry @@ -3996,7 +4083,7 @@ You can pick further points to get line segments. Color - Color + Barva @@ -4260,12 +4347,12 @@ using the given X/Y Spacing X Spacing - X Spacing + Vzdálenost X Y Spacing - Y Spacing + Vzdálenost Y @@ -4288,12 +4375,12 @@ using the given X/Y Spacing Geometry - Geometry + Geometrie CenterLine - CenterLine + osa @@ -4339,7 +4426,7 @@ using the given X/Y Spacing Color - Color + Barva @@ -4514,21 +4601,21 @@ using the given X/Y Spacing Symbol - Symbol + Symbol arrow - arrow + šipka other - other + Ostatní @@ -4557,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index e224295f49..e2b6014670 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 12473ede1e..6117343146 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Technisches Zeichnen - + + Add Cosmetic Line Through 2 Points + Kosmetische Linie durch 2 Punkte hinzufügen + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Technisches Zeichnen + + + Insert 3-Point Angle Dimension Winkelmaß über 3 Punkte einfügen @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Technisches Zeichnen - + Insert Angle Dimension Winkelmaß zweier Linien einfügen @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Technisches Zeichnen - + Insert Annotation Anmerkung einfügen @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Technisches Zeichnen - + Insert Center Line Mittellinie einfügen - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Technisches Zeichnen - + Remove Cosmetic Object Hilfsobjekt entfernen @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Technisches Zeichnen - + Add Cosmetic Vertex Hilfspunkt hinzufügen @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Technisches Zeichnen - + Insert Cosmetic Vertex Hilfspunkt einfügen - + Add Cosmetic Vertex Hilfspunkt hinzufügen @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Technisches Zeichnen - + Change Appearance of Lines Liniendarstellung ändern @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Technisches Zeichnen - + Insert Extent Dimension Maß über alles einfügen - + Horizontal Extent Horizontale Ausdehnung - + Vertical Extent Vertikale Ausdehnung @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Technisches Zeichnen - + Insert Horizontal Dimension Horizontales Maß einfügen @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Technisches Zeichnen - + Insert Horizontal Extent Dimension Maß für die horizontale Ausdehnung einfügen @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Technisches Zeichnen - + Insert Landmark Dimension - EXPERIMENTAL Leitmaß einfügen - EXPERIMENTELL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Technisches Zeichnen - + Add Leaderline to View Hinweislinie zur Ansicht hinzufügen @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Technisches Zeichnen - + Link Dimension to 3D Geometry Maß mit 3D Geometrie verknüpfen @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Technisches Zeichnen - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Technisches Zeichnen - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Technisches Zeichnen - + Insert Rich Text Annotation Rich-Text-Anmerkung einfügen @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Technisches Zeichnen - + Show/Hide Invisible Edges Verdeckte Kanten ein-/ausblenden @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw Technisches Zeichnen - + Insert Vertical Dimension Vertikales Maß einfügen @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Technisches Zeichnen - + Insert Vertical Extent Dimension Maß für die vertikale Ausdehnung einfügen @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Technisches Zeichnen - + Add Welding Information to Leaderline Hinzufügen von Schweißinformationen zur Hinweisline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Falsche Auswahl @@ -1144,26 +1157,20 @@ Öffnen Sie die Zeichnungsansichten vor dem Export nach SVG. - - - - - - - - + + + + + + + Incorrect Selection Falsche Auswahl - - - Can not make a Dimension from this selection - Kann von dieser Auswahl kein Maß ableiten - @@ -1201,38 +1208,38 @@ Ausgewählte Kante ist ein B-Spline. Durchmesser wird angenähert. Fortfahren? - + Need two straight edges to make an Angle Dimension Es werden zwei gerade Kanten für ein Winkelmaß benötigt - + Need three points to make a 3 point Angle Dimension Es werden 3 Punkte für ein Winkelmaß benötigt - + There is no 3D object in your selection Sie haben kein 3D-Objekt ausgewählt - + There are no 3D Edges or Vertices in your selection Es gibt keine 3D-Kanten oder Ecken in Ihrer Auswahl - - + + Please select a View [and Edges]. Bitte wählen Sie eine Ansicht [und Kanten]. - + Select 2 point objects and 1 View. (1) Wähle 2 Punktobjekte und 1 Ansicht. (1) - + Select 2 point objects and 1 View. (2) Wähle 2 Punktobjekte und 1 Ansicht. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Zuerst ein Objekt auswählen - + Too many objects selected Zu viele Objekte ausgewählt - + Create a page first. Erstellen Sie zunächst eine Seite. - + No View of a Part in selection. Keine Teileansicht in der Auswahl. - + No Feature with Shape in selection. Kein Element einer Form in der Auswahl. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Aufgabe in Bearbeitung - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Schließen Sie den aktiven Task-Dialog und versuchen Sie es erneut. - - - - + + + + Selection Error Auswahlfehler - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Falsche Auswahl - + Can not attach leader. No base View selected. Kann die Hinweislinie nicht hinzufügen. Es wurde keine Basisansicht ausgewählt. - - - + + + + You must select a base View for the line. Sie müssen eine Basisansicht für die Linie auswählen. - - + + No DrawViewPart objects in this selection Keine DrawViewPart-Objekte in dieser Auswahl - - - - + + + + No base View in Selection. Keine Basisansicht ausgewählt. - + You must select Faces or an existing CenterLine. Sie müssen Flächen oder eine vorhandene Mittellinie auswählen. - + No CenterLine in selection. Keine Mittellinie in der Auswahl. - - - + + + Selection is not a CenterLine. Auswahl ist keine Mittellinie. - + Selection not understood. Auswahl nicht verstanden. - + You must select 2 Vertexes or an existing CenterLine. Sie müssen 2 Punkte oder eine vorhandene Mittellinie auswählen. - + Need 2 Vertices or 1 CenterLine. Es werden 2 Punkte oder 1 Mittellinie benötigt. - + + Selection is empty. + Auswahl ist leer. + + + + Not enough points in selection. + Nicht genügend Punkte ausgewählt. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Keine Ansicht in der Auswahl. - + You must select a View and/or lines. Sie müssen eine Ansicht und / oder Linien auswählen. - + No Part Views in this selection Keine Fläche in dieser Auswahl - + Select exactly one Leader line or one Weld symbol. Auswahl genau einer Hinweislinie oder eines Schweißsymbols. - - + + Nothing selected Nichts ausgewählt - + At least 1 object in selection is not a part view Mindestens 1 Objekt in der Auswahl ist keine Bauteilansicht - + Unknown object type in selection Unbekannter Objekttyp in der Auswahl @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Bist du sicher, dass du fortfahren möchtest? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Schweißsymbol bearbeiten + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1706,27 +1751,25 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Das Zeichnungsblatt ist nicht leer, deshalb könnten die +folgenden Referenzobjekte verloren gehen: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Die Ansichtengruppe kann nicht gelöscht werden, da ihre Elemente die folgenden Hinweislinien oder Schnitt- oder Detailansichten enthalten, die unbrauchbar würden: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Die Ansichtengruppe ist nicht leer, deshalb könnten folgende Referenzobjekte verloren gehen: The following referencing object might break: - The following referencing object might break: + Das nachfolgende Referenzobjekt könnte unbrauchbar werden: @@ -2064,19 +2107,19 @@ Dann muss das Kachellimit erhöht werden. Schnittkanten zeigen - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximale Anzahl von Schraffurliniensegmenten für das Schraffieren einer Fläche mit einem PAT-Schraffurmuster - + Line End Cap Shape Form der Linienenden - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2085,42 +2128,42 @@ can be a performance penalty in complex models. Schraffieren zu können; dies kann aber zu Performance-Einbußen bei komplexen Modellen führen. - + Detect Faces Flächen erkennen - + Include edges with unexpected geometry (zero length etc.) in results Berücksichtige Kanten mit unerwarteter Geometrie (Länge Null usw.) für Ergebnisse - + Allow Crazy Edges Unübliche Kanten erlauben - + Max SVG Hatch Tiles Max. SVG-Schraffur-Felder - + Max PAT Hatch Segments Max. PAT-Schraffur-Segmente - + Dimension Format Maßzahlenformat - + Override automatic dimension format Automatisches Maßzahlenformat überschreiben - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Hinweis:</span> Elemente in <span style=" font-style:italic;">kursiv</span> sind Standardwerte für neue Objekte. Sie haben keine Auswirkung auf vorhandene Objekte.</p></body></html> @@ -3143,7 +3186,7 @@ Jede Einheit ist etwa 0,1 mm breit Welding Symbol Scale - Schweißnahtsymbol Skala + Skalierung der Schweißnahtsymbole @@ -3587,6 +3630,49 @@ siehe FreeCAD Wiki '2LineCenterLine' für eine BeschreibungBearbeitung abgebrochen. Fang noch mal von vorne an. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Ansicht + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4548,7 +4634,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Fügt eine Mittelline zwischen 2 Linien hinzu @@ -4556,7 +4642,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Fügt eine Mittelline zwischen 2 Punkten hinzu @@ -4564,7 +4650,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Fügt einen Hilfspunkt in eine Ansicht ein @@ -4572,7 +4658,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Fügt Flächen eine Mittellinie hinzu @@ -4580,7 +4666,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Maß für die horizontale Ausdehnung einfügen @@ -4588,7 +4674,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Fügt Hilfspunkte mittig auf den ausgewählten Kanten ein @@ -4596,7 +4682,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Fügt Hilfspunkte auf den Quadrantengrenzen ausgewählter Kreise ein @@ -4604,7 +4690,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Maß für die vertikale Ausdehnung einfügen diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm index 33dbcb475c..daf62976c4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index 33b1c07cb9..97377f4067 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Τεχνική Σχεδίαση - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Τεχνική Σχεδίαση + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Τεχνική Σχεδίαση - + Insert Annotation Εισαγωγή Περιγραφής @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Τεχνική Σχεδίαση - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Τεχνική Σχεδίαση - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Τεχνική Σχεδίαση - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Τεχνική Σχεδίαση - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Τεχνική Σχεδίαση - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Τεχνική Σχεδίαση - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Τεχνική Σχεδίαση - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Τεχνική Σχεδίαση - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Τεχνική Σχεδίαση - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Τεχνική Σχεδίαση - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Λάθος επιλογή @@ -1144,26 +1157,20 @@ Ανοίξτε την Προβολή Σχεδίασης πριν επιχειρήσετε να κάνετε εξαγωγή σε SVG. - - - - - - - - + + + + + + + Incorrect Selection Εσφαλμένη Επιλογή - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Δεν υπάρχει κανένα τρισδιάστατο αντικείμενο στην επιλογή σας - + There are no 3D Edges or Vertices in your selection Δεν υπάρχουν τρισδιάστατες Ακμές ή Κορυφές στην επιλογή σας - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Επιλέξτε πρώτα ένα αντικείμενο - + Too many objects selected Επιλέχθηκαν πάρα πολλά αντικείμενα - + Create a page first. Δημιουργήστε πρώτα μια σελίδα. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Προβολή + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm index 0a6f96ef2e..2ce42f4dfc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index 6c7274dde7..032733c2e8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Añadir Vértices de Punto Medio @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Añadir Vértices de Cuadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insertar cota de ángulo de 3 puntos @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insertar cota de ángulo @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insertar anotación @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insertar Línea Central - + Add Centerline to Faces Añadir línea central a las caras @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Eliminar Objeto Cosmético @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Añadir vértice cosmético @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insertar vértice cosmético - + Add Cosmetic Vertex Añadir vértice cosmético @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Cambiar el aspecto de las líneas @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insertar cota de extensión - + Horizontal Extent Extensión horizontal - + Vertical Extent Extensión vertical @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Añadir línea central a las caras @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insertar cota horizontal @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insertar cota de extensión horizontal @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insertar cota de marca (EXPERIMENTAL) @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Añadir línea de anotación @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Enlazar cota a geometría 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Añadir Vértices de Punto Medio @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Añadir Vértices de Cuadrante @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insertar Anotación de Texto Enriquecido @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostrar/Ocultar Bordes Invisibles @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insertar cota vertical @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insertar cota de extensión vertical @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Añadir Información de Soldadura a la Línea de Flecha @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Selección incorrecta @@ -1144,26 +1157,20 @@ Vista del dibujo abierta antes de intentar exportar a SVG. - - - - - - - - + + + + + + + Incorrect Selection Selección incorrecta - - - Can not make a Dimension from this selection - No puede hacer una cota desde esta selección - @@ -1201,38 +1208,38 @@ El borde seleccionado es un BSpline. El diámetro será aproximado. ¿Continuar? - + Need two straight edges to make an Angle Dimension Necesita dos bordes rectos para hacer una cota de ángulo - + Need three points to make a 3 point Angle Dimension Necesita tres puntos para hacer una cota de ángulo de 3 puntos - + There is no 3D object in your selection No hay ningún objeto 3D en su selección - + There are no 3D Edges or Vertices in your selection No hay bordes o vértices 3D en su selección - - + + Please select a View [and Edges]. Por favor, seleccione una Vista [y Aristas]. - + Select 2 point objects and 1 View. (1) Seleccione objetos de 2 puntos y 1 vista.(1) - + Select 2 point objects and 1 View. (2) Seleccione objetos de 2 puntos y 1 Vista. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Seleccione un objeto en primer lugar - + Too many objects selected Demasiados objetos seleccionados - + Create a page first. Cree una página de dibujo primero. - + No View of a Part in selection. Sin vista de un objeto Part en la selección. - + No Feature with Shape in selection. No hay ninguna operación asociada a una Forma en la selección. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tarea en progreso - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Cerrar diálogo de tareas activo e inténtelo de nuevo. - - - - + + + + Selection Error Error de selección - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Selección Incorrecta - + Can not attach leader. No base View selected. No se puede adjuntar directriz. No se ha seleccionado la vista base. - - - + + + + You must select a base View for the line. Debe seleccionar una vista base para la línea. - - + + No DrawViewPart objects in this selection No hay objetos DrawViewPart en esta selección - - - - + + + + No base View in Selection. No hay Vista base en la selección. - + You must select Faces or an existing CenterLine. Debe seleccionar una(s) cara(s) o una línea central existente. - + No CenterLine in selection. No hay Línea Central en la selección. - - - + + + Selection is not a CenterLine. La selección no es una línea central. - + Selection not understood. Selección no entendida. - + You must select 2 Vertexes or an existing CenterLine. Debe seleccionar 2 Vértices o una Línea Central existente. - + Need 2 Vertices or 1 CenterLine. Necesita 2 vértices o una línea central. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No hay Vista en la Selección. - + You must select a View and/or lines. Debe seleccionar una vista y/o líneas. - + No Part Views in this selection No hay Vistas de Piezas en esta selección - + Select exactly one Leader line or one Weld symbol. Seleccione exactamente una línea de Flecha o un símbolo de Soldadura. - - + + Nothing selected Nada seleccionado - + At least 1 object in selection is not a part view Al menos 1 objeto en la selección no es una vista de pieza - + Unknown object type in selection Tipo de objeto desconocido en la selección @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + ¿Está seguro de que desea continuar? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Editar Símbolo de Soldadura + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,27 +1752,27 @@ contiene un símbolo de soldadura que se podría romper. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + La página no está vacía, por lo tanto el +siguiente objeto de referencia podría perderse: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + El grupo no puede ser borrado porque sus elementos tienen la +siguiente sección, vistas de detalle o líneas de flecha que podrían romperse: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + El grupo de proyección no está vacío, por lo tanto +los siguientes objetos de referencia podrían perderse: The following referencing object might break: - The following referencing object might break: + El siguiente objeto de referencia se podría romper: @@ -2066,19 +2111,19 @@ Por tanto, necesitará aumentar el límite de recuadros. Mostrar Aristas de Sección - + Maximum hatch line segments to use when hatching a face with a PAT pattern Segmentos máximos de la línea de rayado a usar al rayar una cara con un patrón PAT - + Line End Cap Shape Forma del extremo de línea - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2089,42 +2134,42 @@ Las caras deben ser detectadas para poder usar el rayado, pero puede haber una penalización de rendimiento en modelos complejos. - + Detect Faces Detectar caras - + Include edges with unexpected geometry (zero length etc.) in results Incluye bordes con geometría inesperada (longitud cero, etc) en los resultados - + Allow Crazy Edges Permitir bordes raros - + Max SVG Hatch Tiles Máximo de recuadros SVG de rayado - + Max PAT Hatch Segments Máximo Segmentos PAT de rayado - + Dimension Format Formato de dimensión - + Override automatic dimension format Anular formato de dimensión automática - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Nota:</span> Artículos en cursiva <span style=" font-style:italic;"></span> son valores predeterminados para nuevos objetos. No tienen ningún efecto sobre los objetos existentes.</p></body></html> @@ -3593,6 +3638,49 @@ vea la wiki de FreeCAD '2LineCenterLine' para una descripciónEn proceso de edición abandonado. Comenzar de nuevo. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vista + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ usando el Espaciado X/Y dado TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Añade una Línea Central entre 2 Líneas @@ -4563,7 +4651,7 @@ usando el Espaciado X/Y dado TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Añade una Línea Central entre 2 puntos @@ -4571,7 +4659,7 @@ usando el Espaciado X/Y dado TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserta un Vértice Cosmético en una Vista @@ -4579,7 +4667,7 @@ usando el Espaciado X/Y dado TechDraw_FaceCenterLine - + Adds a Centerline to Faces Añade una Línea Central a las Caras @@ -4587,7 +4675,7 @@ usando el Espaciado X/Y dado TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insertar cota de extensión horizontal @@ -4595,7 +4683,7 @@ usando el Espaciado X/Y dado TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserta Vértices Cosméticos en el Punto Medio de las aristas seleccionadas @@ -4603,7 +4691,7 @@ usando el Espaciado X/Y dado TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserta Vértices Cosméticos en los Puntos Cuadrantes de los círculos seleccionados @@ -4611,7 +4699,7 @@ usando el Espaciado X/Y dado TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insertar cota de extensión vertical diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm index ab11336d32..9eac4bb7fc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 6f644b0c96..b35516b7fb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Gehitu koadrante-erpinak @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Txertatu 3 puntuko angelu-kota bat @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Txertatu angelu-kota @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Txertatu oharpena @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Txertatu erdiko lerroa - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Kendu objektu kosmetikoa @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Gehitu erpin kosmetikoa @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Txertatu erpin kosmetikoa - + Add Cosmetic Vertex Gehitu erpin kosmetikoa @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aldatu lerroen itxura @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Txertatu hedadura-kota bat - + Horizontal Extent Hedadura horizontala - + Vertical Extent Hedadura bertikala @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Txertatu kota horizontala @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Txertatu hedadura horizontaleko kota @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Txertatu mugarri-kota - ESPERIMENTALA @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Gehitu gida-marra bistari @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Estekatu kota 3D geometria batekin @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Gehitu koadrante-erpinak @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Txertatu testu aberatseko oharpena @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Erakutsi/ezkutatu ertz ikusezinak @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Txertatu kota bertikala @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Txertatu hedadura bertikaleko kota @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Gehitu soldadura-informazioa gida-marrari @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Hautapen okerra @@ -1144,26 +1157,20 @@ Ireki marrazki-bista SVG formatura esportatzen saiatu baino lehen. - - - - - - - - + + + + + + + Incorrect Selection Hautapen okerra - - - Can not make a Dimension from this selection - Ezin da kota bat egin hautapen horrekin - @@ -1201,38 +1208,38 @@ Hautatutako ertza BSpline bat da. Diametroa gutxi gorabeherakoa izango da. Jarraitu? - + Need two straight edges to make an Angle Dimension Bi ertz zuzen behar dira angelu-kota bat egiteko - + Need three points to make a 3 point Angle Dimension Hiru puntu behar dira 3 puntuko angelu-kota bat egiteko - + There is no 3D object in your selection Ez dago 3D objekturik zure hautapenean - + There are no 3D Edges or Vertices in your selection Ez dago 3D ertzik edo erpinik zure hautapenean - - + + Please select a View [and Edges]. Hautatu bista bat [eta ertzak]. - + Select 2 point objects and 1 View. (1) Hautatu bi puntu-objektu eta bista bat. (1) - + Select 2 point objects and 1 View. (2) Hautatu bi puntu-objektu eta bista bat. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Hautatu objektu bat - + Too many objects selected Objektu gehiegi hautatuta - + Create a page first. Lehenengo, sortu orrialde bat. - + No View of a Part in selection. Ez dago piezaren bistarik hautapenean. - + No Feature with Shape in selection. Ez dago formarik duen elementurik hautapenean. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Zeregina abian - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Itxi zeregin aktiboaren elkarrizketa-koadroa eta saiatu berriro. - - - - + + + + Selection Error Hautapen-errorea - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Hautapen okerra - + Can not attach leader. No base View selected. Ezin da gida-marra erantsi. Ez da oinarrizko bistarik hautatu. - - - + + + + You must select a base View for the line. Oinarrizko bista bat hautatu behar duzu lerrorako. - - + + No DrawViewPart objects in this selection Ez dago marrazki-piezaren bistarik hautapen honetan - - - - + + + + No base View in Selection. Ez dago oinarri-bistarik hautapenean. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. Ez dago erdiko lerrorik hautapenean. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Hautapena ez da ulertzen. - + You must select 2 Vertexes or an existing CenterLine. 2 erpin edo lehendik dagoen erdiko lerro bat hautatu behar duzu. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Ez dago bistarik hautapenean. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection Ez dago pieza-bistarik hautapen honetan - + Select exactly one Leader line or one Weld symbol. Hautatu gida-marra bakar bat edo soldadura-ikur bakar bat. - - + + Nothing selected Ez da ezer hautatu - + At least 1 object in selection is not a part view Hautapeneko objektu bat gutxienez ez da pieza-bista bat - + Unknown object type in selection Objektu-forma ezezaguna hautapenean @@ -1643,15 +1678,25 @@ Edit Welding Symbol Editatu soldadura-ikurra + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View - New Detail View + Xehetasu-bista berria Edit Detail View - Edit Detail View + Editatu xehetasun-bista @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detektatu aurpegiak - + Include edges with unexpected geometry (zero length etc.) in results Sartu espero gabeko geometria (zero luzera, etab.) duten ertzak emaitzetan - + Allow Crazy Edges Onartu ertz eroak - + Max SVG Hatch Tiles SVG itzaleztadura-lauza kopuru maximoa - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Kota-lerroen formatua - + Override automatic dimension format Gainidatzi kota-lerroen formatu automatikoa - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Abian dagoen edizioa utzi da. Hasi berriro. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Bista + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Erdiko lerro bat gehitzen du 2 lerroren artean @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Erdiko lerro bat gehitzen du 2 punturen artean @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Erpin kosmetikoa txertatzen du bista batean @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Erdiko lerro bat gehitzen die aurpegiei @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Txertatu hedadura horizontaleko kota @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Erpin kosmetikoak txertatzen ditu hautatutako ertzen erdiko puntuan @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Erpin kosmetikoak txertatzen ditu hautatutako zirkuluen koadrante-puntuetan @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Txertatu hedadura bertikaleko kota diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm index 8076010d1a..8a8e08e32a 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 9132bb8e0c..ee70af4890 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Väärä valinta @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Luo sivu ensin. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -2727,7 +2772,7 @@ can be a performance penalty in complex models. Dashed - Dashed + Katkoviiva @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Näytä + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm index 102fc5eeee..b42b6914f9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts index f4f08cee36..88a3c6de57 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Maling pagpili @@ -1144,26 +1157,20 @@ Buksan ang Drawing tanaw bago tangkaing i-luwas sa SVG. - - - - - - - - + + + + + + + Incorrect Selection Maling Pagpipilian - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Walang bagay sa 3D sa iyong pinili - + There are no 3D Edges or Vertices in your selection Walang 3D hangganan o Vertices sa iyong pagpipilian - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Pumili muna ng isang bagay - + Too many objects selected Napiling napakaraming mga bagay - + Create a page first. Lumikha muna ng page. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3597,6 +3642,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Masdan + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4559,7 +4647,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4567,7 +4655,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4575,7 +4663,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4583,7 +4671,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4591,7 +4679,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4599,7 +4687,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4607,7 +4695,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4615,7 +4703,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index c06d97b215..ed226191af 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index a6ea2ff549..f4c5777527 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Ajouter une ligne de centre entre 2 points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Ajouter des sommets de points médians @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Ajouter des sommets de quadrants @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Ajouter une ligne de centre entre 2 points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insérer une cote angulaire à 3 points @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insérer une cote angulaire @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insérer une annotation @@ -139,23 +152,23 @@ Insert Balloon Annotation - Insérer une annotation en bulle + Insérer une annotation bulle CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insérer une ligne centrale - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Supprimer l'objet cosmétique @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Ajouter un sommet cosmétique @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Ajouter un sommet cosmétique - + Add Cosmetic Vertex Ajouter un sommet cosmétique @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Changer l'apparence des lignes @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insérer une dimension d'encombrement - + Horizontal Extent Encombrement horizontal - + Vertical Extent Encombrement vertical @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insérer une nouvelle cote horizontale @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insérer une dimension d'encombrement horizontale @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insérer une dimension de repère - EXPÉRIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Insérer une ligne de référence à la vue @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Lier une cote à une géométrie 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Ajouter des sommets de points médians @@ -577,7 +590,7 @@ Insert Projection Group - Insérer un groupe projection + Insérer un groupe de projection @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Ajouter des sommets de quadrants @@ -621,18 +634,18 @@ Redraw Page - Redessiner la Page + Redessiner la page CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insérer une annotation de texte enrichi @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Afficher/Masquer les arrêtes cachées @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insérer une cote verticale @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insérer une cote d'extension verticale @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Ajouter les informations de soudage à la ligne de référence @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Sélection invalide @@ -1145,26 +1158,20 @@ Ouvrir la vue de dessin avant d’essayer d’exporter vers SVG. - - - - - - - - + + + + + + + Incorrect Selection Sélection non valide - - - Can not make a Dimension from this selection - Impossible de créer une cote avec cette sélection - @@ -1202,38 +1209,38 @@ Le bord sélectionné est un BSpline. Le Diamètre sera approximatif. Continuer ? - + Need two straight edges to make an Angle Dimension Deux arêtes droites sont requises pour créer une cote angulaire - + Need three points to make a 3 point Angle Dimension Trois points sont requis pour créer une cote angulaire à 3 points - + There is no 3D object in your selection Pas d'objet 3D sélectionné - + There are no 3D Edges or Vertices in your selection Il n’y a aucune arête ou sommet 3D dans votre sélection - - + + Please select a View [and Edges]. Veuillez sélectionner une vue [et arêtes]. - + Select 2 point objects and 1 View. (1) Sélectionnez des objets à 2 points et 1 vue. (1) - + Select 2 point objects and 1 View. (2) Sélectionnez des objets à 2 points et 1 vue. (2) @@ -1242,11 +1249,11 @@ - - - - - + + + + + @@ -1255,196 +1262,224 @@ - + Select an object first Sélectionnez d’abord un objet - + Too many objects selected Trop d'éléments sélectionnés - + Create a page first. Créez d'abord une page. - + No View of a Part in selection. Aucune vue d'une pièce dans la sélection. - + No Feature with Shape in selection. Aucune objet avec une forme dans la sélection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tâche en cours - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Fermer la boîte de dialogue des tâches actives et réessayer. - - - - + + + + Selection Error Erreur de sélection - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Sélection incorrecte - + Can not attach leader. No base View selected. Impossible d'attacher la référence. Aucune vue de base sélectionnée. - - - + + + + You must select a base View for the line. Vous devez sélectionner une vue de base pour la ligne. - - + + No DrawViewPart objects in this selection Aucun objet DrawViewPart dans cette sélection - - - - + + + + No base View in Selection. Aucune Vue de base dans la sélection. - + You must select Faces or an existing CenterLine. Vous devez sélectionner des faces ou une ligne centrale existante. - + No CenterLine in selection. Pas de ligne centrale dans la sélection. - - - + + + Selection is not a CenterLine. La sélection n'est pas une ligne centrale. - + Selection not understood. Sélection non comprise. - + You must select 2 Vertexes or an existing CenterLine. Vous devez sélectionner 2 sommets ou une ligne centrale existante. - + Need 2 Vertices or 1 CenterLine. Exige 2 sommets ou 1 ligne centrale. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Aucune vue dans la sélection. - + You must select a View and/or lines. Vous devez sélectionner une vue et/ou des lignes. - + No Part Views in this selection Pas de vue dans la sélection - + Select exactly one Leader line or one Weld symbol. Sélectionnez exactement une ligne de repère ou un symbole de soudure. - - + + Nothing selected Aucune sélection - + At least 1 object in selection is not a part view Au moins 1 objet dans la sélection n'est pas une vue de pièce - + Unknown object type in selection Type d'objet inconnu dans la sélection @@ -1550,7 +1585,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Êtes-vous sûr de vouloir continuer ? @@ -1644,6 +1679,16 @@ Edit Welding Symbol Modifier un symbole de soudure + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1708,27 +1753,28 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + La page n'est pas vide, donc les +objets de référence suivants pourraient être perdus : The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Le groupe ne peut pas être supprimé car les vues de coupes, + les vues de détail ou les lignes de références suivantes seront cassées : + The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Le groupe de projection n'est pas vide, donc +les objets de référence suivants pourraient être perdus : The following referencing object might break: - The following referencing object might break: + L'objet de référence suivant pourrait casser : @@ -2065,18 +2111,18 @@ Then you need to increase the tile limit. Afficher les arêtes de coupe - + Maximum hatch line segments to use when hatching a face with a PAT pattern Nombre maximal de segments de ligne à utiliser lors du hachurage d'une face avec un motif PAT - + Line End Cap Shape Style des extrémités de ligne - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2084,42 +2130,42 @@ can be a performance penalty in complex models. Si coché, TechDraw tentera de créer des faces en utilisant les segments de ligne renvoyés par l'algorithme de suppression de ligne cachée. Les faces doivent être détectées pour utiliser les hachures, mais il peut y avoir une baisse des performances dans les modèles complexes. - + Detect Faces Détecter les faces - + Include edges with unexpected geometry (zero length etc.) in results Inclure les arêtes avec une géométrie inattendue (longueur zéro, etc.) dans les résultats - + Allow Crazy Edges Autoriser les arêtes extravagantes - + Max SVG Hatch Tiles Maximum de tuiles de hachures SVG - + Max PAT Hatch Segments Maximum de segments de hachures PAT - + Dimension Format Format de la dimension - + Override automatic dimension format Annuler le format de dimensionnement automatique - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Remarque:</span> les éléments en <span style=" font-style:italic;">italiques</span> sont les valeurs par défaut des nouveaux objets. Ils n'ont aucun effet sur les objets existants.</p></body></html> @@ -3586,6 +3632,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Modification en cours abandonnée. Recommencer. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vue + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X : + + + + + Y: + Y : + + + + + Z: + Z : + + TechDrawGui::TaskDetail @@ -4548,7 +4637,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -4556,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Ajoute une ligne centrale entre 2 points @@ -4564,7 +4653,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insère un Sommet Cosmétique dans une Vue @@ -4572,7 +4661,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4580,7 +4669,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insérer une dimension d'encombrement horizontale @@ -4588,7 +4677,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4596,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4604,7 +4693,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insérer une cote d'extension verticale diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm index bdf7e4cb40..1270dd03ad 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index e782f5a35b..a117f0b068 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insire apuntamento @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Escolma errada @@ -1144,26 +1157,20 @@ Abre Vista de Debuxo antes de tentar exportar a SVG. - - - - - - - - + + + + + + + Incorrect Selection Selección Incorrecta - - - Can not make a Dimension from this selection - Non se pode facer un Acoutamento dende esta selección - @@ -1201,38 +1208,38 @@ O bordo escolmado é unha BSpline. O diámetro será aproximado. Dámoslle? - + Need two straight edges to make an Angle Dimension Necesita dous bordos dereitos para facer un Acoutamento Angular - + Need three points to make a 3 point Angle Dimension Necesita tres puntos para facer un Acotamento de Ángulo de 3 puntos - + There is no 3D object in your selection Non hai obxectos 3D na túa selección - + There are no 3D Edges or Vertices in your selection Non hai Bordos 3D ou Vértices na túa selección - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Primeiro escolme un obxecto - + Too many objects selected Demasiados obxectos escolmados - + Create a page first. Primeiro, cree unha páxina. - + No View of a Part in selection. Sen vista da peza en selección. - + No Feature with Shape in selection. Non hai característica con forma na escolma. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tarefa en Progreso - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Pechar o cadro de diálogo e tentalo outra vez. - - - - + + + + Selection Error Erro de Escolma - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Imposible adxuntar lider. Na vista escolmada. - - - + + + + You must select a base View for the line. Debes escolmar unha Vista base para a liña. - - + + No DrawViewPart objects in this selection Sen obxectos DrawViewPart na escolma - - - - + + + + No base View in Selection. Sen Vista base na Selección. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nada escolmado - + At least 1 object in selection is not a part view Ao menos 1 obxecto da escolma non é unha vista parcial - + Unknown object type in selection Tipo de obxecto descoñecido na escolma @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description En proceso edición abandonada. Inicia de novo. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vista + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm index 85f8f45d86..6e1ea4324b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 49df62c7f6..deadbd5fc3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Tehničko Crtanje - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Tehničko Crtanje + + + Insert 3-Point Angle Dimension Umetnite novu dimenziju kuta sa 3 točke @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Tehničko Crtanje - + Insert Angle Dimension Umetnite novu dimenziju kuta @@ -101,14 +114,14 @@ CmdTechDrawAnnotation - + TechDraw Tehničko Crtanje - + Insert Annotation - Umetanje primjedbe + Umetanje napomene @@ -139,23 +152,23 @@ Insert Balloon Annotation - Umetni Oblačić komentar + Umetni Oblačić napomene CmdTechDrawCenterLineGroup - + TechDraw Tehničko Crtanje - + Insert Center Line Umetnite središnju liniju - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Tehničko Crtanje - + Remove Cosmetic Object Ukloni pomoćni objekt @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Tehničko Crtanje - + Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Tehničko Crtanje - + Insert Cosmetic Vertex Umetni pomoćnu tjemenu točku - + Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Tehničko Crtanje - + Change Appearance of Lines Promijenite izgled linija @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Tehničko Crtanje - + Insert Extent Dimension Umetnite dimenziju do granice - + Horizontal Extent Vodoravno do granice - + Vertical Extent Okomito do granice @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Tehničko Crtanje - + Insert Horizontal Dimension Umetnite vodoravnu dimenziju @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Tehničko Crtanje - + Insert Horizontal Extent Dimension Umetnite vodoravnu dimenziju do granice @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Tehničko Crtanje - + Insert Landmark Dimension - EXPERIMENTAL Umetni Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Tehničko Crtanje - + Add Leaderline to View Dodaj liniju oznake u Pogled @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Tehničko Crtanje - + Link Dimension to 3D Geometry Poveži dimenziju na 3D geometriju @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Tehničko Crtanje - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Tehničko Crtanje - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove @@ -627,14 +640,14 @@ CmdTechDrawRichTextAnnotation - + TechDraw Tehničko Crtanje - + Insert Rich Text Annotation - Umetni Rich Text napomenu + Umetni raskošni tekst napomenu @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Tehničko Crtanje - + Show/Hide Invisible Edges Prikaži / sakrij nevidljive rubove @@ -696,7 +709,9 @@ Insert symbol from an SVG file - Insert symbol from an SVG file + Umetnite simbol iz SVG datoteke + + @@ -716,12 +731,12 @@ CmdTechDrawVerticalDimension - + TechDraw Tehničko Crtanje - + Insert Vertical Dimension Umetnite okomitu dimenziju @@ -729,12 +744,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Tehničko Crtanje - + Insert Vertical Extent Dimension Umetnite okomitu dimenziju do granice @@ -760,14 +775,14 @@ CmdTechDrawWeldSymbol - + TechDraw Tehničko Crtanje - + Add Welding Information to Leaderline - Dodaj informaciju zavarivanja na liniju oznake + Dodaj informaciju spajanja na liniju oznake @@ -1028,16 +1043,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Pogrešan odabir @@ -1145,26 +1160,20 @@ Otvori prikaz prije izvoza u SVG. - - - - - - - - + + + + + + + Incorrect Selection Netočan odabir - - - Can not make a Dimension from this selection - Ne može se napraviti Dimenzija iz ovog odabira - @@ -1202,38 +1211,38 @@ Odabrani rub je BSpline. Promjer će biti približan. Nastaviti? - + Need two straight edges to make an Angle Dimension Trebaju mi dva ravna ruba da napravim dimenziju kuta - + Need three points to make a 3 point Angle Dimension Trebaju mi tri točke da napravim Dimenziju Kuta od 3 točke - + There is no 3D object in your selection Nema 3D objekta u odabranom - + There are no 3D Edges or Vertices in your selection Ne postoje 3D rubovi ili vrhovi na vašem odabiru - - + + Please select a View [and Edges]. Odaberite Pogled [i rubove]. - + Select 2 point objects and 1 View. (1) Odaberite 2 objekta Točke i 1 Pogled.(1) - + Select 2 point objects and 1 View. (2) Odaberite 2 objekta Točke i 1 Pogled.(2) @@ -1242,11 +1251,11 @@ - - - - - + + + + + @@ -1255,197 +1264,225 @@ - + Select an object first Najprije odaberite objekt - + Too many objects selected Previše objekata odabrano - + Create a page first. Najprije napravite stranicu. - + No View of a Part in selection. Ne postoji Pogled na Dio u odabiru. - + No Feature with Shape in selection. Nema Svojstva sa Oblikom u izboru. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Rješavanje u postupku - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Zatvori aktivni dijalog rješavača i pokušaj ponovo. - - - - + + + + Selection Error Greška odabira - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Pogrešan odabir - + Can not attach leader. No base View selected. Ne može se priložiti prednjak. Nije odabran nijedan osnovni prikaz. - - - + + + + You must select a base View for the line. Morate odabrati osnovni prikaz za redak. - - + + No DrawViewPart objects in this selection Nema DrawViewPart objekata u ovom odabiru - - - - + + + + No base View in Selection. Nema osnovnog pogleda u odabiru. - + You must select Faces or an existing CenterLine. Morate odabrati Lica ili postojeću Srednju liniju. - + No CenterLine in selection. Nema Srednje linije u odabiru. - - - + + + Selection is not a CenterLine. Odabir nije Srednja linija. - + Selection not understood. Odabir nije razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Morate odabrati 2 tjemene točke ili postojeću Srednju liniju. - + Need 2 Vertices or 1 CenterLine. Potrebna su 2 Vrha ili 1 Srednja linija - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Nema pogleda u odabiru. - + You must select a View and/or lines. Morate odabrati jedan Pogled i / ili linije. - + No Part Views in this selection Nema Pogleda djelova u ovom odabiru - + Select exactly one Leader line or one Weld symbol. - Odaberite samo jednu liniju oznake ili simbol zavarivanja. + Odaberite samo jednu liniju oznake ili simbol spajanja. - - + + Nothing selected Ništa nije odabrano - + At least 1 object in selection is not a part view Najmanje 1 predmet u odabiru nije Prikaz dijelova - + Unknown object type in selection Nepoznata vrsta objekta u izboru @@ -1551,7 +1588,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Jeste li sigurni da želite nastaviti? @@ -1638,22 +1675,32 @@ Create Welding Symbol - Stvorite simbol zavarivanja + Stvorite simbol spajanja Edit Welding Symbol - Uredite simbol zavarivanja + Uredite simbol spajanja + + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line New Detail View - New Detail View + Novi detaljni pogled Edit Detail View - Edit Detail View + Uredite detaljni pogled @@ -1662,8 +1709,10 @@ You cannot delete this leader line because it has a weld symbol that would become broken. - You cannot delete this leader line because -it has a weld symbol that would become broken. + Ne možete izbrisati ovu liniju vodilicu jer +ima simbol spajanja koji bi se pokidao. + + @@ -1711,34 +1760,44 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Stranica nije prazna, stoga +sljedeći referentni objekti mogu biti izgubljeni: + + The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Grupu nije moguće izbrisati jer njezine stavke imaju sljedeće +odjeljke ili detaljne poglede, ili linije vodilice koji će se slomiti: + + The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Projekcijska skupina nije prazna +sljedeći referentni objekti se mogu izgubiti: + + The following referencing object might break: - The following referencing object might break: + Sljedeći referentni objekt se može slomiti: + + You cannot delete this weld symbol because it has a tile weld that would become broken. - You cannot delete this weld symbol because -it has a tile weld that would become broken. + Ne možete izbrisati ovaj simbol zavarivanja jer +ima pločicu spajanja koja bi se pokidala. + + @@ -1814,7 +1873,7 @@ gornje i lijeve granice pogleda Drawing style - see SoRenderManager - Drawing style - see SoRenderManager + Stil crtanja - pogledaj odabir u RenderManager @@ -1834,7 +1893,7 @@ gornje i lijeve granice pogleda Wireframe overlay - Wireframe overlay + Žičana mreža pokrov @@ -1844,7 +1903,7 @@ gornje i lijeve granice pogleda Bounding box - Bounding box + Granični okvir @@ -1852,7 +1911,7 @@ gornje i lijeve granice pogleda Welding Symbol - Welding Symbol + Simbol Spajanja @@ -1867,7 +1926,9 @@ gornje i lijeve granice pogleda Pick arrow side symbol - Pick arrow side symbol + Odaberite stranu strelice simbola spajanja + + @@ -1878,27 +1939,27 @@ gornje i lijeve granice pogleda Text above arrow side symbol - Text above arrow side symbol + Tekst iznad simbola spajanja sa strelicom Pick other side symbol - Pick other side symbol + Odaberite simbol spajanja nasuprot Text below other side symbol - Text below other side symbol + Tekst ispod simbola spajanja sa strelicom Text after other side symbol - Text after other side symbol + Tekst nakon simbola spajanja sa strelicom Flips the sides - Prebaci strane + Prebacuje strane @@ -1908,12 +1969,12 @@ gornje i lijeve granice pogleda Text before other side symbol - Text before other side symbol + Tekst prije simbola spajanja sa strelicom Remove other side symbol - Remove other side symbol + Obriši simbol spajanja nasuprot @@ -1924,13 +1985,13 @@ gornje i lijeve granice pogleda Adds the 'Field Weld' symbol (flag) at the kink in the leader line - Dodaje 'Polje vara 'simbol (zastavica) + Dodaje 'Polje spajanja 'simbol (zastavica) na prijelom u liniji oznake Field Weld - Field Weld + Polje Spajanja @@ -1947,7 +2008,9 @@ na prijelom u liniji oznake Offsets the lower symbol to indicate alternating welds - Offsets the lower symbol to indicate alternating welds + Pomjeri donji simbol da označi izmjenične spojeve + + @@ -1958,7 +2021,7 @@ na prijelom u liniji oznake Directory to welding symbols. This directory will be used for the symbol selection. - Imenik za simbole zavarivanja. + Imenik za simbole spajanja. Taj će se direktorij koristiti za odabir simbola. @@ -1970,7 +2033,7 @@ Taj će se direktorij koristiti za odabir simbola. Text at end of symbol - Tekst na kraju simbola zavarivanja + Tekst na kraju simbola spajanja @@ -1995,8 +2058,10 @@ Taj će se direktorij koristiti za odabir simbola. Shape of line end caps. Only change unless you know what you are doing! - Shape of line end caps. -Only change unless you know what you are doing! + Oblik završnih kapaka crte. +Promijenite se samo ako znate što radite! + + @@ -2026,47 +2091,49 @@ Zatim morate povećati broj ograničenje pločica. Dump intermediate results during Detail view processing - Dump intermediate results during Detail view processing + Izbaci međupredmetne rezultate tijekom obrade detaljnog pogleda Debug Detail - Debug Detail + Otklanjanje pogrešaka detalji Include 2D Objects in projection - Include 2D Objects in projection + Uključite 2D objekte u projekciju + + Show Loose 2D Geom - Show Loose 2D Geom + Prikaži neučvršćenu 2D geometriju Dump intermediate results during Section view processing - Dump intermediate results during Section view processing + Izbaci međupredmetne rezultate tijekom obrade pogleda odjeljka Debug Section - Debug Section + Otklanjanje pogrešaka odjeljak Perform a fuse operation on input shape(s) before Section view processing - Perform a fuse operation on input shape(s) before Section view processing + Izvedite spajanje na ulaznim oblicima prije obrade prikaza odjeljka Fuse Before Section - Fuse Before Section + Spoji prije obrade odsjeka Highlights border of section cut in section views - Highlights border of section cut in section views + Istaknuti granice reza odjeljka u prikazima presjeka @@ -2074,7 +2141,7 @@ Zatim morate povećati broj ograničenje pločica. Prikaži rubove odjeljka - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maksimalni segmenti linija šrafiranja koji se koriste @@ -2082,12 +2149,12 @@ kad se šrafira lice s PAT uzorkom - + Line End Cap Shape - Line End Cap Shape + Oblik kraja linije - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2099,44 +2166,44 @@ može smanjiti performanse u složenim modelima. - + Detect Faces Otkri naličja - + Include edges with unexpected geometry (zero length etc.) in results - Include edges with unexpected geometry (zero length etc.) in results + U rezultate uključite rubove s neočekivanom geometrijom (nulta duljina itd.) - + Allow Crazy Edges Odobri neobične rubove - + Max SVG Hatch Tiles Maksimalni broj pločica SVG šrafure - + Max PAT Hatch Segments Maksimalni broj PAT segmenata šrafure - + Dimension Format Format Dimenzije - + Override automatic dimension format Mijenja automatski format Dimenzije - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -2248,7 +2315,7 @@ može smanjiti performanse u složenim modelima. Length of balloon leader line kink - Dužina prijeloma linije oznake + Dužina prijeloma linije vodilice oblačića sa riječima @@ -2258,7 +2325,7 @@ može smanjiti performanse u složenim modelima. Shape of balloon annotations - Oblik oblačić komentara + Oblik oblačića napomene @@ -2329,27 +2396,27 @@ može smanjiti performanse u složenim modelima. Section Line Style - Section Line Style + Stil linije odjeljka Show arc center marks in views - Show arc center marks in views + Prikažite oznake središta luka u prikazima Show Center Marks - Show Center Marks + Prikažite oznake središta Default name in LineGroup CSV file - Default name in LineGroup CSV file + Zadano ime u LineGroup CSV datoteci Detail View Outline Shape - Detail View Outline Shape + Detaljni pogled vanjske linije oblika @@ -2364,12 +2431,14 @@ može smanjiti performanse u složenim modelima. Ballon Leader Kink Length - Ballon Leader Kink Length + Oblačić dužina linije prijeloma Restrict Filled Triangle line end to vertical or horizontal directions - Restrict Filled Triangle line end to vertical or horizontal directions + Ograničite kraj linije ispunjenog trokuta na vertikalni ili vodoravni smjer + + @@ -2389,27 +2458,29 @@ može smanjiti performanse u složenim modelima. Show arc centers in printed output - Show arc centers in printed output + Pokažite centre lukova u tiskanom obliku + + Print Center Marks - Print Center Marks + Tiska oznake centra Line style of detail highlight on base view - Line style of detail highlight on base view + Stil linije istaknutih detalja u osnovnom pogledu Detail Highlight Style - Detail Highlight Style + Detaljni Istaknuti Stil <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -2508,7 +2579,7 @@ može smanjiti performanse u složenim modelima. Color of dimension lines and text. - Color of dimension lines and text. + Boja linija dimenzije i teksta @@ -2543,7 +2614,7 @@ može smanjiti performanse u složenim modelima. Object faces will be transparent - Object faces will be transparent + Naličja objekta će biti prozirna @@ -2568,12 +2639,12 @@ može smanjiti performanse u složenim modelima. Default color for leader lines - Default color for leader lines + Zadana boja linija vodilice <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -2637,12 +2708,14 @@ može smanjiti performanse u složenim modelima. Alternate Decimals - Alternate Decimals + Alternativne decimale Number of decimals if 'Use Global Decimals' is not used - Number of decimals if 'Use Global Decimals' is not used + Broj decimala ako 'Koristite Globalne decimalne brojeve' se ne koristi + + @@ -2652,7 +2725,7 @@ može smanjiti performanse u složenim modelima. Dimension text font size - Dimension text font size + Dimenzija teksta veličine pisma @@ -2662,7 +2735,9 @@ može smanjiti performanse u složenim modelima. Character used to indicate diameter dimensions - Character used to indicate diameter dimensions + Znak koji se koristi za označavanje dimenzija promjera + + @@ -2677,7 +2752,7 @@ može smanjiti performanse u složenim modelima. Arrowhead style - Arrowhead style + Stil vrha strelice @@ -2697,12 +2772,13 @@ može smanjiti performanse u složenim modelima. Projection Group Angle - Projection Group Angle + Kut projekcijske grupe + Use first- or third-angle multiview projection convention - Use first- or third-angle multiview projection convention + Koristite konvenciju za projekciju višestrukog prikaza prvog ili trećeg kuta @@ -2722,7 +2798,7 @@ može smanjiti performanse u složenim modelima. Hidden Line Style - Hidden Line Style + Prikaz skrivenih linija @@ -2742,7 +2818,7 @@ može smanjiti performanse u složenim modelima. <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -2765,38 +2841,46 @@ može smanjiti performanse u složenim modelima. Update With 3D (global policy) - Update With 3D (global policy) + Ažuriraj s 3D (globalni pravilnik) + + Whether or not a page's 'Keep Updated' property can override the global 'Update With 3D' parameter - Whether or not a page's 'Keep Updated' property -can override the global 'Update With 3D' parameter + Bez obzira na to je li stranica može ili ne 'Držite ažurirano' nadjačati globalno svojstvo'Nadogradnja sa 3D' parametar Allow Page Override (global policy) - Allow Page Override (global policy) + Dopusti nadjačavanje stranice (globalni pravilnik) + + Keep drawing pages in sync with changes of 3D model in real time. This can slow down the response time. - Keep drawing pages in sync with changes of 3D model in real time. -This can slow down the response time. + Stranice za crtanje sinkronizirajte s promjenama 3D modela u stvarnom vremenu. +Ovo može usporiti vrijeme odziva. + + Keep Page Up To Date - Keep Page Up To Date + Redovito ažurirajte stranicu. + + Automatically distribute secondary views for ProjectionGroups - Automatically distribute secondary views -for ProjectionGroups + Automatski distribuirajte sekundarne poglede +za Grupe Prikaza + @@ -2851,7 +2935,7 @@ for ProjectionGroups Starting directory for menu 'Insert Page using Template' - Starting directory for menu 'Insert Page using Template' + Početni direktorij za izbornik 'Ubaci stranicu pomoću Predloška' @@ -2872,17 +2956,17 @@ for ProjectionGroups Alternate file for personal LineGroup definition - Alternate file for personal LineGroup definition + Alternativna datoteka za osobnu definiciju Linija Grupe Welding Directory - Imenik zavarivanja + Imenik Spajanja Default directory for welding symbols - Zadani direktorij za simbole zavarivanja + Zadani direktorij za simbole spajanja @@ -2903,7 +2987,7 @@ for ProjectionGroups Name of the default PAT pattern - Name of the default PAT pattern + Ime zadanog PAT uzorka @@ -2913,7 +2997,7 @@ for ProjectionGroups <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -2926,18 +3010,18 @@ for ProjectionGroups Hidden Line Removal - Hidden Line Removal + Sakrij skrivene linije Show seam lines - Show seam lines + Prikaži linije šavova Show Seam Lines - Show Seam Lines + Prikaži linije šava @@ -2948,56 +3032,64 @@ for ProjectionGroups Show Smooth Lines - Show Smooth Lines + Prikaži izglađene linije Show hard and outline edges (always shown) - Show hard and outline edges (always shown) + Prikaži tvrde i obrubne rubove (uvijek prikazano) + + Show Hard Lines - Show Hard Lines + Prikaži oštre linije Use an approximation to find hidden lines. Fast, but result is a collection of short straight lines. - Use an approximation to find hidden lines. -Fast, but result is a collection of short straight lines. + Koristite aproksimaciju (približavanje) da biste pronašli skrivene crte. +Brzo, ali rezultat je zbirka kratkih ravnih linija. Use Polygon Approximation - Use Polygon Approximation + Upotrijebite aproksimaciju poligona Make lines of equal parameterization - Make lines of equal parameterization + Napravite linije jednake parametrizacije + + Show UV ISO Lines - Show UV ISO Lines + Prikaži UV ISO linije Show hidden smooth edges - Show hidden smooth edges + Pokažite skrivene glatke rubove + + Show hidden seam lines - Show hidden seam lines + Prikaži skrivene linije šava Show hidden equal parameterization lines - Show hidden equal parameterization lines + Prikaži jednake skrivene linije parametrizacije + + @@ -3012,22 +3104,24 @@ Fast, but result is a collection of short straight lines. Show hidden hard and outline edges - Show hidden hard and outline edges + Prikaži skrivene tvrde i obrubne rubove ISO Count - ISO Count + ISO Broj Number of ISO lines per face edge - Number of ISO lines per face edge + Broj ISO linija po rubu lica + + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -3041,22 +3135,26 @@ Fast, but result is a collection of short straight lines. Page Scale - Page Scale + Mjerilo stranice Default scale for new pages - Default scale for new pages + Zadano skaliranje za nove stranice + + View Scale Type - View Scale Type + Prikaz vrste skale Default scale for new views - Default scale for new views + Zadano skaliranje za nove poglede + + @@ -3076,12 +3174,12 @@ Fast, but result is a collection of short straight lines. View Custom Scale - View Custom Scale + Prikaz prilagođene skale Default scale for views if 'View Scale Type' is 'Custom' - Default scale for views if 'View Scale Type' is 'Custom' + Zadano skaliranje za prikaz ako 'Prikaz vrste skale' je 'Prilagođeno' @@ -3092,15 +3190,19 @@ Fast, but result is a collection of short straight lines. Selection area around center marks Each unit is approx. 0.1 mm wide - Selection area around center marks -Each unit is approx. 0.1 mm wide + Prostor za odabir oko središnjih oznaka +Svaka jedinica iznosi cca. Širine 0,1 mm + + Size of selection area around edges Each unit is approx. 0.1 mm wide - Size of selection area around edges -Each unit is approx. 0.1 mm wide + Prostor za odabir oko rubnih oznaka +Svaka jedinica iznosi cca. Širine 0,1 mm + + @@ -3120,7 +3222,9 @@ Each unit is approx. 0.1 mm wide Tolerance font size adjustment. Multiplier of dimension font size. - Tolerance font size adjustment. Multiplier of dimension font size. + Prilagođavanje tolerancije veličine fonta. Množitelj dimenzije veličine fonta. + + @@ -3160,17 +3264,17 @@ Each unit is approx. 0.1 mm wide Welding Symbol Scale - Welding Symbol Scale + Skaliranje Simbola Spajanja Multiplier for size of welding symbols - Multiplier for size of welding symbols + Faktor množenja za veličinu simbola spajanja <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Bilješka:</span> Stavke u <span style=" font-style:italic;">nakošen</span> su zadane vrijednosti za nove objekte. Oni nemaju utjecaja na postojeće objekte.</p></body></html> @@ -3270,7 +3374,7 @@ Do you want to continue? Directory to welding symbols. - Directory to welding symbols. + Mapa za simbole spajanja. @@ -3388,12 +3492,12 @@ Do you want to continue? Leader Kink Length: - Dužina prijeloma vodilice: + Dužina prijeloma linije vodilice: Length of balloon leader line kink - Dužina prijeloma linije oznake + Dužina prijeloma linije vodilice oblačića sa riječima @@ -3421,7 +3525,7 @@ Do you want to continue? Top to Bottom line - Top to Bottom line + Linija od gore na dolje @@ -3431,7 +3535,7 @@ Do you want to continue? Left to Right line - Left to Right line + Linija od lijevo na desno @@ -3444,10 +3548,10 @@ Do you want to continue? - lines: in equal distance to the lines and with half of the angle the lines have to each other - points: in equal distance to the points - centerline between -- lines: in equal distance to the lines and with - half of the angle the lines have to each other -- points: in equal distance to the points + središnja linija između +- linija: na jednakoj udaljenosti od linija i sa + polovinom kuta koji linije imaju jedna prema drugoj +- točke: na jednakoj udaljenosti od točaka @@ -3605,6 +3709,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Uređivanje napušteno. Početi ispočetka. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Pregled + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3640,7 +3787,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description size of detail view - size of detail view + veličina detaljnog pogleda @@ -3681,7 +3828,7 @@ Custom: custom scale factor is used Scale Factor - Scale Factor + Faktor skale @@ -4016,7 +4163,7 @@ You can pick further points to get line segments. Thickness of pattern lines. - Thickness of pattern lines. + Debljina linija uzoraka. @@ -4270,12 +4417,12 @@ using the given X/Y Spacing X Spacing - X Spacing + X razmak Y Spacing - Y Spacing + Y razmak @@ -4324,7 +4471,7 @@ using the given X/Y Spacing Rich Text Annotation Block - Rich Text Blok napomena + Raskošni tekst Blok napomena @@ -4414,7 +4561,7 @@ using the given X/Y Spacing Input the annotation text directly or start the rich text editor - Input the annotation text directly or start the rich text editor + Unesite tekst napomene izravno ili pokrenite uređivač raskošnog teksta @@ -4447,7 +4594,7 @@ using the given X/Y Spacing BaseView - BaseView + Osnovni Pogled @@ -4462,12 +4609,14 @@ using the given X/Y Spacing Scale factor for the section view - Scale factor for the section view + Faktor skale za prikaz presjeka + + Section Orientation - Section Orientation + Orijentacija presjeka @@ -4477,7 +4626,7 @@ using the given X/Y Spacing Position from the 3D origin of the object in the view - Position from the 3D origin of the object in the view + Položaj od 3D ishodišta objekta u prikazu @@ -4508,12 +4657,12 @@ using the given X/Y Spacing Nothing to apply. No section direction picked yet - Nothing to apply. No section direction picked yet + Ništa se ne primjenjuje. Još nije odabran pravac odjeljka Can not continue. Object * %1 * not found. - Can not continue. Object * %1 * not found. + Ne može se nastaviti. Objekt * %1 * nije pronađen. @@ -4567,39 +4716,39 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines - Adds a Centerline between 2 Lines + Dodajte središnju liniju između dvije linije TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points - Adds a Centerline between 2 Points + Dodajte središnju liniju između dvije točke TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View - Inserts a Cosmetic Vertex into a View + Umetnite dekorativne tjemene točke u pogled TechDraw_FaceCenterLine - + Adds a Centerline to Faces - Adds a Centerline to Faces + Dodaj simetralu na lice(a) TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Umetnite vodoravnu dimenziju do granice @@ -4607,23 +4756,25 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges - Inserts Cosmetic Vertices at Midpoint of selected Edges + Umetanje dekoracija vrhova u sredinu odabranih rubova TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles - Inserts Cosmetic Vertices at Quadrant Points of selected Circles + Umetanje dekoracija vrhova u kvadratne točke odabranih krugova + + TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Umetnite okomitu dimenziju do granice diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm index 4725ba0c94..d7b2e3eb3c 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index 3d3e712726..0ff9f6d1b3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw MűszakiRajz - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + MűszakiRajz + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw MűszakiRajz - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw MűszakiRajz - + Insert Annotation Széljegyzet beszúrása @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw MűszakiRajz - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw MűszakiRajz - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw MűszakiRajz - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw MűszakiRajz - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw MűszakiRajz - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw MűszakiRajz - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw MűszakiRajz - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw MűszakiRajz - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw MűszakiRajz - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw MűszakiRajz - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw MűszakiRajz - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw MűszakiRajz - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw MűszakiRajz - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw MűszakiRajz - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw MűszakiRajz - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw MűszakiRajz - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw MűszakiRajz - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw MűszakiRajz - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw MűszakiRajz - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Rossz kijelölés @@ -1144,26 +1157,20 @@ Nyissa meg a rajz nézetet az SVG exportálási kísérlet előtt. - - - - - - - - + + + + + + + Incorrect Selection Hibás kijelölés - - - Can not make a Dimension from this selection - Nem tud méretet létrehozni ebből a kiválasztásból - @@ -1201,38 +1208,38 @@ A kiválasztott él egy folyamatos ív. Az ármérő hozzávetőleges érték lesz. Folytatja? - + Need two straight edges to make an Angle Dimension Két egyenes él szükséges egy szög méretvonal létrehozásához - + Need three points to make a 3 point Angle Dimension Három pont kell a 3 pontos szög méretvonalához - + There is no 3D object in your selection Nem található 3D objektum a kijelölésében - + There are no 3D Edges or Vertices in your selection Nincsenek 3D-s élek vagy csúcspontok a kijelölésében - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Először válasszon ki egy tárgyat - + Too many objects selected Túl sok kijelölt objektum - + Create a page first. Először hozzon létre egy oldalt. - + No View of a Part in selection. Nincs alkatrész nézet ebben a kiválasztásban. - + No Feature with Shape in selection. Nincs alakzat tulajdonság a kiválasztásban. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress A feladat folyamatban - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Zárja be az aktív feladatot és próbálja később. - - - - + + + + Selection Error Kiválasztási hiba - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. A vezér egyenest nem tudja csatolni. Nem lett kiválasztva alapértelmezett nézet. - - - + + + + You must select a base View for the line. Alapértelmezett nézetet kell kiválasztania az egyeneshez. - - + + No DrawViewPart objects in this selection A kijelölt részen nem található DrawViewPart objektum - - - - + + + + No base View in Selection. Nincs alapnézet a kijelölésben. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Semmi sincs kiválasztva - + At least 1 object in selection is not a part view Legalább 1 objektum a kijelölt részen nem egy résznézet - + Unknown object type in selection Ismeretlen típusú tárgy a kiválasztásban @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Folyamatban lévő szerkesztés megszakítva. Kezdje újra. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Nézet + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4596,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm index 976cac49b6..bdfc97415b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index c5bff758fa..cc08db1b68 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -4,23 +4,23 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + Tambah Garis tengah antara 2 Garis Cmd2PointCenterLine - + Add Centerline between 2 Points - Add Centerline between 2 Points + Tambah Garis tengah antara 2 Titik CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,38 +36,51 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + Tambah Garis tengah antara 2 Garis CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points - Add Centerline between 2 Points + Tambah Garis tengah antara 2 Titik + + + + CmdTechDraw2PointCosmeticLine + + + TechDraw + TechDraw + + + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -266,7 +279,7 @@ Insert Detail View - Insert Detail View + Tambahkan Tampak Detail @@ -279,7 +292,7 @@ Insert Diameter Dimension - Insert Diameter Dimension + Masukan Dimensi Diameter @@ -292,7 +305,7 @@ Insert Dimension - Insert Dimension + Masukan Dimensi @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -447,7 +460,7 @@ Insert Bitmap Image - Insert Bitmap Image + Masukan Gambar Bitmap @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -621,18 +634,18 @@ Redraw Page - Redraw Page + Gambar Ulang Halaman CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -647,20 +660,20 @@ Insert Section View - Insert Section View + Masukan Gambar Potongan CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges - Show/Hide Invisible Edges + Tampilkan/Sembuyikan Tepi Tak Terlihat @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -806,7 +819,7 @@ Cut (CTRL+X) - Cut (CTRL+X) + Potong (CTRL+X) @@ -816,7 +829,7 @@ Copy (CTRL+C) - Copy (CTRL+C) + Salin (CTRL+C) @@ -826,17 +839,17 @@ Paste (CTRL+V) - Paste (CTRL+V) + Tempel (CTRL+V) Paste - Paste + Tempel Link (CTRL+L) - Link (CTRL+L) + Tautan (CTRL+L) @@ -851,7 +864,7 @@ Italic (CTRL+I) - Italic (CTRL+I) + Miring (CTRL+I) @@ -861,7 +874,7 @@ Underline (CTRL+U) - Underline (CTRL+U) + Garis Bawah (CTRL+U) @@ -871,7 +884,7 @@ Strikethrough - Strikethrough + Coret @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Pilihan salah @@ -1144,26 +1157,20 @@ Buka Drawing View sebelum mencoba ekspor ke SVG. - - - - - - - - + + + + + + + Incorrect Selection Seleksi yang salah - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Tidak ada objek 3D dalam pilihan Anda - + There are no 3D Edges or Vertices in your selection Tidak ada Tepi atau Simpul 3D dalam pilihan Anda - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Pilih objek terlebih dahulu - + Too many objects selected Terlalu banyak objek yang dipilih - + Create a page first. Buat halaman terlebih dahulu. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Tampilan + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm index 09af340569..0a8dc7805b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index db84c745c0..37ad208786 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Linea centrale a 2 punti @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Vertice nel punto mediano @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Vertici quadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Linea centrale a 2 punti - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Angolo da 3 punti @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Angolo @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Annotazione @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Inserisci linea centrale - + Add Centerline to Faces Linea a centro faccia @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Rimuovi oggetto cosmetico @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Vertice cosmetico @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Inserisce un Vertice Cosmetico - + Add Cosmetic Vertex Vertice cosmetico @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aspetto delle linee @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Dimensione di estensione - + Horizontal Extent Estensione orizzontale - + Vertical Extent Estensione verticale @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Linea a centro faccia @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Quota orizzontale @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Estensione orizzontale @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Quota da punti di riferimento - SPERIMENTALE @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Linea guida @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link alla geometria 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Vertice nel punto mediano @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Vertici quadrante @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Blocco di testo @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/nascondi i bordi invisibili @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Quota verticale @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Estensione verticale @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Informazioni di saldatura @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Selezione errata @@ -1144,26 +1157,20 @@ Aprire una Vista Disegno prima di tentare l'esportazione in SVG. - - - - - - - - + + + + + + + Incorrect Selection Selezione non corretta - - - Can not make a Dimension from this selection - Non è possibile creare una Quota da questa selezione - @@ -1201,38 +1208,38 @@ Il bordo selezionato è una BSpline. Il diametro sarà approssimativo. Continuare? - + Need two straight edges to make an Angle Dimension Per creare una quota di Angolo servono due bordi dritti - + Need three points to make a 3 point Angle Dimension Per creare una quota di Angolo da 3 punti servono tre punti - + There is no 3D object in your selection Nella selezione non esiste alcun oggetto 3D - + There are no 3D Edges or Vertices in your selection Nella selezione non esistono spigoli o vertici 3D - - + + Please select a View [and Edges]. Selezionare una vista [e i bordi]. - + Select 2 point objects and 1 View. (1) Selezionare 2 oggetti punti e 1 vista. (1) - + Select 2 point objects and 1 View. (2) Selezionare 2 oggetti punti e 1 vista. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Prima selezionare un oggetto - + Too many objects selected Troppi oggetti selezionati - + Create a page first. Prima creare una pagina. - + No View of a Part in selection. Nessuna vista di una Parte nella selezione. - + No Feature with Shape in selection. Nessun oggetto con una forma nella selezione. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Attività in corso - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Chiudere la finestra di dialogo attiva e riprovare. - - - - + + + + Selection Error Errore di selezione - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Selezione sbagliata - + Can not attach leader. No base View selected. Impossibile agganciare la guida. Nessuna vista di base selezionata. - - - + + + + You must select a base View for the line. Selezionare una vista base per la linea. - - + + No DrawViewPart objects in this selection Nessun oggetto DrawViewPart in questa selezione - - - - + + + + No base View in Selection. Nessuna Vista di base nella selezione. - + You must select Faces or an existing CenterLine. Selezionare le facce o una linea centrale esistente. - + No CenterLine in selection. Nessuna linea centrale nella selezione. - - - + + + Selection is not a CenterLine. La selezione non è una linea centrale. - + Selection not understood. Selezione non compresa. - + You must select 2 Vertexes or an existing CenterLine. Selezionare 2 vertici o una linea centrale esistente. - + Need 2 Vertices or 1 CenterLine. Servono 2 vertici o 1 linea centrale. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Nessuna vista nella selezione. - + You must select a View and/or lines. Selezionare una vista e/o delle linee. - + No Part Views in this selection Nessuna vista parte in questa selezione - + Select exactly one Leader line or one Weld symbol. Seleziona solo una linea guida o un simbolo di saldatura. - - + + Nothing selected Nessuna selezione - + At least 1 object in selection is not a part view Almeno 1 oggetto nella selezione non è una vista parte - + Unknown object type in selection Tipo di oggetto sconosciuto nella selezione @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Sei sicuro di voler continuare? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Modifica simbolo di saldatura + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,34 +1752,34 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + La pagina non è vuota, quindi i seguenti +oggetti di riferimento potrebbero andare persi: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Il gruppo non può essere eliminato perché i suoi elementi hanno le seguenti +viste in sezione o di dettaglio o linee guida che si romperebbero: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Il gruppo di proiezione non è vuoto, quindi +i seguenti oggetti di riferimento potrebbero andare persi: The following referencing object might break: - The following referencing object might break: + Il seguente oggetto di referimento potrebbe rompersi: You cannot delete this weld symbol because it has a tile weld that would become broken. Non è possibile eliminare questo simbolo di saldatura perché - ha un simbolo di saldatura che si romperebbe. + ha una tessera di saldatura che si romperebbe. @@ -2067,19 +2112,19 @@ In questo caso è necessario aumentare il limite delle tessere. Mostra i bordi delle sezioni - + Maximum hatch line segments to use when hatching a face with a PAT pattern Massimo numero di segmenti di linea da utilizzare quando si tratteggia una faccia con un modello PAT - + Line End Cap Shape Forma terminale della linea - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Devono essere rilevate le facce per poter utilizzare il tratteggio, ma può penalizzare le prestazioni in modelli complessi. - + Detect Faces Rileva le facce - + Include edges with unexpected geometry (zero length etc.) in results Include i bordi con geometria imprevista (lunghezza zero, ecc.) nei risultati - + Allow Crazy Edges Accetta gli spigoli pazzi - + Max SVG Hatch Tiles Massimo numero di tessere di tratteggio SVG - + Max PAT Hatch Segments Massimo numero di segmenti di tratteggio PAT - + Dimension Format Formato della dimensione - + Override automatic dimension format Sovrascrive il formato automatico della dimensione - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Nota:</span> Gli elementi in <span style=" font-style:italic;">corsivo</span> sono valori predefiniti per i nuovi oggetti. Non hanno alcun effetto sugli oggetti esistenti.</p></body></html> @@ -2692,7 +2737,7 @@ ma può penalizzare le prestazioni in modelli complessi. Use first- or third-angle multiview projection convention - Utilizza la convenzione di primo o terzo angolo + Utilizza la proiezione convenzionale di primo o terzo angolo @@ -3592,6 +3637,49 @@ vedere il Wiki FreeCAD '2LineCenterLine' per una descrizioneModifica in corso abbandonata. Ricominciare. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vista + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3877,7 +3965,7 @@ Personalizzato: viene utilizzato il fattore di scala personalizzatoFirst pick the start point of the line, then at least a second point. You can pick further points to get line segments. - Selezionare prima il punta iniziale della linea, + Selezionare prima il punto iniziale della linea, poi almeno un secondo punto. Si possono scegliere ulteriori punti per ottenere dei segmenti di linea. @@ -4554,7 +4642,7 @@ usando la spaziatura X/Y specificata TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Aggiunge una linea centrale tra 2 linee @@ -4562,7 +4650,7 @@ usando la spaziatura X/Y specificata TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Aggiunge una linea centrale tra 2 punti @@ -4570,7 +4658,7 @@ usando la spaziatura X/Y specificata TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserisce un vertice cosmetico in una vista @@ -4578,7 +4666,7 @@ usando la spaziatura X/Y specificata TechDraw_FaceCenterLine - + Adds a Centerline to Faces Linea a centro faccia @@ -4586,7 +4674,7 @@ usando la spaziatura X/Y specificata TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Estensione orizzontale @@ -4594,7 +4682,7 @@ usando la spaziatura X/Y specificata TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserisce vertici cosmetici al centro dei bordi selezionati @@ -4602,7 +4690,7 @@ usando la spaziatura X/Y specificata TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserisce vertici cosmetici nei punti quadranti dei cerchi selezionati @@ -4610,7 +4698,7 @@ usando la spaziatura X/Y specificata TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Estensione verticale diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm index 03d3303411..e321f51474 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 6db93e6ef6..9ae3170cd3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 2点間に中心線を追加 @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices 中点を追加 @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices 四分点を追加 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 2点間に中心線を追加 - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension 3点角度寸法を挿入 @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension 角度寸法を挿入 @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 注釈を挿入 @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line 中心線を挿入 - + Add Centerline to Faces 面に中心線を追加 @@ -202,56 +215,56 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object - Remove Cosmetic Object + 表示用の頂点を削除 CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex - Add Cosmetic Vertex + 表示用の頂点を追加 CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex - Insert Cosmetic Vertex + 表示用の頂点を挿入 - + Add Cosmetic Vertex - Add Cosmetic Vertex + 表示用の頂点を追加 CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines 線の表示を変更 @@ -352,35 +365,35 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension - Insert Extent Dimension + 範囲寸法を挿入 - + Horizontal Extent - Horizontal Extent + 水平範囲 - + Vertical Extent - Vertical Extent + 垂直範囲 CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces 面に中心線を追加 @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension 水平寸法を挿入 @@ -427,14 +440,14 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension - Insert Horizontal Extent Dimension + 水平範囲寸法を挿入 @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View ビューに引き出し線を追加 @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry 寸法を3Dジオメトリーとリンク @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 中点を追加 @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 四分点を追加 @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation リッチテキスト注釈を挿入 @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges 見えないエッジの表示/非表示 @@ -696,7 +709,7 @@ Insert symbol from an SVG file - Insert symbol from an SVG file + SVGファイルから記号を挿入 @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension 垂直寸法を挿入 @@ -729,14 +742,14 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension - Insert Vertical Extent Dimension + 垂直範囲寸法を挿入 @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline 溶接情報を引き出し線に追加 @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection 誤った選択 @@ -1045,7 +1058,7 @@ No Shapes, Groups or Links in this selection - No Shapes, Groups or Links in this selection + シェイプ、グループ、リンクが選択されていません。 @@ -1106,7 +1119,7 @@ There were no DraftWB objects in the selection. - There were no DraftWB objects in the selection. + DraftWBオブジェクトが選択されていません。 @@ -1144,26 +1157,20 @@ SVGへのエクスポートを試みる前に図面ビューを開きます。 - - - - - - - - + + + + + + + Incorrect Selection 誤った選択です。 - - - Can not make a Dimension from this selection - この選択対象から寸法を作ることはできません。 - @@ -1201,51 +1208,51 @@ 選択されたエッジはBスプラインです。直径は概算です。続けますか？ - + Need two straight edges to make an Angle Dimension 角度寸法を作成するには2つの直線のエッジが必要です。 - + Need three points to make a 3 point Angle Dimension 3点角度寸法の作成には3つの点が必要です。 - + There is no 3D object in your selection 3Dオブジェクトが選択されていません。 - + There are no 3D Edges or Vertices in your selection 3Dエッジまたは頂点が選択されていません。 - - + + Please select a View [and Edges]. ビュー [あるいは（複数の）エッジ] を選択してください。. - + Select 2 point objects and 1 View. (1) - Select 2 point objects and 1 View. (1) + 2つの点オブジェクトと1つのビューを選択 (1) - + Select 2 point objects and 1 View. (2) - Select 2 point objects and 1 View. (2) + 2つの点オブジェクトと1つのビューを選択 (2) - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first 最初にオブジェクトを選択してください - + Too many objects selected 選択されているオブジェクトが多すぎます。 - + Create a page first. 最初にページを作成してください - + No View of a Part in selection. パートのビューが選択されていません。 - + No Feature with Shape in selection. シェイプのあるフィーチャーが選択されていません。 - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress 実行中のタスク - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. アクテイブなタスクタイアログを閉じて再度実行してください。 - - - - + + + + Selection Error 選択エラー - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection 間違った選択 - + Can not attach leader. No base View selected. 引き出し線をアタッチできません。ベースビューが選択されていません。 - - - + + + + You must select a base View for the line. 線のためのベースビューを選択する必要があります。 - - + + No DrawViewPart objects in this selection DrawViewPartオブジェクトが選択されていません。 - - - - + + + + No base View in Selection. ベースビューが選択されていません。 - + You must select Faces or an existing CenterLine. 面または既存の中心線を選択する必要があります。 - + No CenterLine in selection. 中心線が選択されていません。 - - - + + + Selection is not a CenterLine. 選択されているのは中心線ではありません。 - + Selection not understood. 選択範囲が理解できません - + You must select 2 Vertexes or an existing CenterLine. 2頂点または既存の中心線を選択する必要があります。 - + Need 2 Vertices or 1 CenterLine. 2頂点または1本の中心線が必要です。 - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. 選択範囲にビューがありません。 - + You must select a View and/or lines. ビューおよび/または行を選択する必要があります。 - + No Part Views in this selection - No Part Views in this selection + パートビューが選択されていません - + Select exactly one Leader line or one Weld symbol. 引き出し線または溶接シンボルを一つだけ選択して下さい。 - - + + Nothing selected 何も選択されていません - + At least 1 object in selection is not a part view 選択されているオブジェクトの少なくとも1つがパートビューではありません - + Unknown object type in selection 選択されているのは不明なオブジェクトタイプです @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + 本当に続行しますか？ @@ -1615,7 +1650,7 @@ Create Section View - セクション・ビューを作成 + 断面ビューを作成 @@ -1626,7 +1661,7 @@ Edit Section View - セクション・ビューを編集 + 断面ビューを編集 @@ -1643,15 +1678,25 @@ Edit Welding Symbol 溶接記号の編集 + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View - New Detail View + 新しい詳細ビュー Edit Detail View - Edit Detail View + 詳細ビューを編集 @@ -1660,8 +1705,7 @@ You cannot delete this leader line because it has a weld symbol that would become broken. - You cannot delete this leader line because -it has a weld symbol that would become broken. + 壊れてしまう溶接記号があるため、この引き出し線を削除することはできません。 @@ -1714,8 +1758,7 @@ following referencing objects might be lost: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + グループアイテムに含まれる以下の断面ビュー、詳細ビュー、または引き出し線が壊れるため、このグループを削除することはできません: @@ -1733,8 +1776,7 @@ the following referencing objects might be lost: You cannot delete this weld symbol because it has a tile weld that would become broken. - You cannot delete this weld symbol because -it has a tile weld that would become broken. + 壊れてしまうタイル溶接があるため、この溶接記号を削除することはできません。 @@ -1839,7 +1881,7 @@ the top and left view border Bounding box - Bounding box + バウンディングボックス @@ -1847,7 +1889,7 @@ the top and left view border Welding Symbol - Welding Symbol + 溶接記号 @@ -1925,7 +1967,7 @@ at the kink in the leader line Field Weld - Field Weld + 現場溶接 @@ -1953,8 +1995,8 @@ at the kink in the leader line Directory to welding symbols. This directory will be used for the symbol selection. - Directory to welding symbols. -This directory will be used for the symbol selection. + 溶接記号のディレクトリ。 +このディレクトリは記号選択で使用されます。 @@ -1964,7 +2006,7 @@ This directory will be used for the symbol selection. Text at end of symbol - Text at end of symbol + 記号終端のテキスト @@ -1974,7 +2016,7 @@ This directory will be used for the symbol selection. Tail Text - Tail Text + 末尾テキスト @@ -2049,7 +2091,7 @@ Then you need to increase the tile limit. Perform a fuse operation on input shape(s) before Section view processing - Perform a fuse operation on input shape(s) before Section view processing + 断面ビュー処理の前に入力形状に対して結合操作を実行 @@ -2067,19 +2109,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern - Maximum hatch line segments to use -when hatching a face with a PAT pattern + PATパターンで面をハッチングする際に +に使用するハッチング線分の最大数 - + Line End Cap Shape 線端の形状 - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2088,42 +2130,42 @@ can be a performance penalty in complex models. ハッチングを用いるために面検出を必要としていますが、複雑なモデルになるとパフォーマンス低下する可能性があります。 - + Detect Faces 面を検出 - + Include edges with unexpected geometry (zero length etc.) in results 予期しないジオメトリ(長さゼロなど) のエッジを結果に含める - + Allow Crazy Edges おかしなエッジを許可する - + Max SVG Hatch Tiles SVGハッチタイルの最大数 - + Max PAT Hatch Segments PATハッチングの最大数 - + Dimension Format 寸法書式 - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -2650,7 +2692,7 @@ can be a performance penalty in complex models. Character used to indicate diameter dimensions - Character used to indicate diameter dimensions + 直径寸法を表すために使用する文字 @@ -2660,22 +2702,22 @@ can be a performance penalty in complex models. Arrow Style - Arrow Style + 矢印のスタイル Arrowhead style - Arrowhead style + 矢印先端のスタイル Arrow Size - Arrow Size + 矢印のサイズ Arrowhead size - Arrowhead size + 矢印先端のサイズ @@ -2685,7 +2727,7 @@ can be a performance penalty in complex models. Projection Group Angle - Projection Group Angle + 投影グループ角度 @@ -2824,12 +2866,12 @@ for ProjectionGroups Default Template - Default Template + デフォルトのテンプレート Default template file for new pages - Default template file for new pages + 新規ページのためのデフォルトのテンプレートファイル @@ -2854,22 +2896,22 @@ for ProjectionGroups Line Group File - Line Group File + ライングループファイル Alternate file for personal LineGroup definition - Alternate file for personal LineGroup definition + 個人用ライングループ定義の代替ファイル Welding Directory - Welding Directory + 溶接ディレクトリ Default directory for welding symbols - Default directory for welding symbols + 溶接記号のためのデフォルトのディレクトリ @@ -2879,7 +2921,7 @@ for ProjectionGroups Default PAT pattern definition file for geometric hatching - Default PAT pattern definition file for geometric hatching + 幾何ハッチングのためのデフォルトのPATパターン定義ファイル @@ -2917,13 +2959,13 @@ for ProjectionGroups Show seam lines - Show seam lines + 縫い目線を表示 Show Seam Lines - Show Seam Lines + 縫い目線を表示 @@ -2978,7 +3020,7 @@ Fast, but result is a collection of short straight lines. Show hidden seam lines - Show hidden seam lines + 非表示の縫い目線を表示 @@ -3350,7 +3392,7 @@ Do you want to continue? Scale factor for the 'Shape' - 「シェイプ」の尺度係数 + 'シェイプ'の拡大縮小率 @@ -3592,6 +3634,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description 処理中の編集を破棄しました。やり直してください。 + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + ビュー + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3607,7 +3692,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Detail View - Detail View + 詳細ビュー @@ -3622,12 +3707,12 @@ see the FreeCAD Wiki '2LineCenterLine' for a description scale factor for detail view - scale factor for detail view + 詳細ビューの拡大縮小率 size of detail view - size of detail view + 詳細ビューのサイズ @@ -3635,10 +3720,9 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page Custom: custom scale factor is used - Page: scale factor of page is used -Automatic: if the detail view is larger than the page, - it will be scaled down to fit into the page -Custom: custom scale factor is used + ページ: ページの拡大縮小率が使用されます。 +自動: 詳細ビューがページより大きい場合にはページに収まる様に縮小されます。 +カスタム: カスタムの拡大縮小率が使用されます。 @@ -3658,7 +3742,7 @@ Custom: custom scale factor is used Scale Type - Scale Type + 拡大縮小タイプ @@ -3668,7 +3752,7 @@ Custom: custom scale factor is used Scale Factor - Scale Factor + 拡大縮小率 @@ -3777,7 +3861,7 @@ Custom: custom scale factor is used Apply Hatch to Face - Apply Hatch to Face + 面にハッチングを適用 @@ -4003,7 +4087,7 @@ You can pick further points to get line segments. Thickness of pattern lines. - Thickness of pattern lines. + パターン線の太さ @@ -4257,12 +4341,12 @@ using the given X/Y Spacing X Spacing - X Spacing + X方向スペーシング Y Spacing - Y Spacing + Y方向スペーシング @@ -4326,7 +4410,7 @@ using the given X/Y Spacing Maximal width, if -1 then automatic width - Maximal width, if -1 then automatic width + 最大幅。-1 の場合は自動幅。 @@ -4401,7 +4485,7 @@ using the given X/Y Spacing Input the annotation text directly or start the rich text editor - Input the annotation text directly or start the rich text editor + 注釈テキストを直接入力するか、リッチテキストエディタを起動 @@ -4429,12 +4513,12 @@ using the given X/Y Spacing Section Parameters - セクション・パラメータ + 断面パラメーター BaseView - BaseView + ベースビュー @@ -4449,12 +4533,12 @@ using the given X/Y Spacing Scale factor for the section view - セクション表示における尺度係数 + 断面ビューの拡大縮小率 Section Orientation - Section Orientation + 断面方向 @@ -4495,12 +4579,12 @@ using the given X/Y Spacing Nothing to apply. No section direction picked yet - Nothing to apply. No section direction picked yet + 適用対象がありません。断面方向が未選択です。 Can not continue. Object * %1 * not found. - Can not continue. Object * %1 * not found. + 続行できません。オブジェクト * %1 *が見つかりません。 @@ -4518,7 +4602,7 @@ using the given X/Y Spacing arrow - arrow + 矢印 @@ -4554,7 +4638,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 2直線間に中心線を追加 @@ -4562,7 +4646,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 2点間に中心線を追加 @@ -4570,7 +4654,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View ビューに表示用の頂点を挿入 @@ -4578,7 +4662,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces 面に中心線を追加 @@ -4586,15 +4670,15 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension - Insert Horizontal Extent Dimension + 水平範囲寸法を挿入 TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges エッジの中点位置に表示用の頂点を挿入 @@ -4602,7 +4686,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles 選択されている円の四分点位置に、表示用の頂点を挿入 @@ -4610,9 +4694,9 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension - Insert Vertical Extent Dimension + 垂直範囲寸法を挿入 diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm index bb633f9c25..9346fa7673 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts index 21d29512aa..c361ac1f2c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Sélection invalide @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Créez d'abord une page. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vue + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X : + + + + + Y: + Y : + + + + + Z: + Z : + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm index 65227601fe..4211494542 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index 6acd169f1e..2c720d3661 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection 잘못 된 선택 @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Create a page first. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + View + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4596,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm index 7fdaf68fbe..f9ab76a47b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts index 318af7b903..36d3a3255c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Techniniai brėžiniai - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Techniniai brėžiniai + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Techniniai brėžiniai - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Techniniai brėžiniai - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Techniniai brėžiniai - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Techniniai brėžiniai - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Techniniai brėžiniai - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Techniniai brėžiniai - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Techniniai brėžiniai - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Techniniai brėžiniai - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Techniniai brėžiniai - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Techniniai brėžiniai - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Techniniai brėžiniai - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Techniniai brėžiniai - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Techniniai brėžiniai - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Techniniai brėžiniai - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Techniniai brėžiniai - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Techniniai brėžiniai - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Techniniai brėžiniai - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw Techniniai brėžiniai - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Techniniai brėžiniai - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Techniniai brėžiniai - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Netinkama pasirinktis @@ -1144,26 +1157,20 @@ Atidaryti brėžinio projekciją prieš bandant eksportuoti į SVG. - - - - - - - - + + + + + + + Incorrect Selection Netinkamas pasirinkimas - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Nepasirinkote jokio 3D objekto - + There are no 3D Edges or Vertices in your selection Nepasirinkote jokių 3D objekto kraštinių ar viršūnių - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Pirmiausia pasirinkite objektą - + Too many objects selected Pasirinkta per daug objektų - + Create a page first. Pirmiausia sukurkite puslapį. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Rodymas + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm index 2b9f7d67f8..b0e42fa891 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 73289729b5..71b0f68c34 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Voeg middelpunten toe @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Voeg kwadrantpunten toe @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Voeg een 3-punts hoekmaat in @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Voeg een hoekmaat in @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Voeg een annotatie in @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Voeg een middenlijn in - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Verwijder cosmetisch object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Voeg een cosmetisch eindpunt in - + Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Verander uiterlijk van de lijnen @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Voeg een expansie-afmeting toe - + Horizontal Extent Horizontale expansie - + Vertical Extent Verticale expansie @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Voeg een horizontale afmeting in @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Voeg een horizontale expansie-afmeting in @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Voeg een oriëntatiepuntafmeting in - EXPERIMENTEEL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Voeg een leiderslijn aan de weergave toe @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Koppel een afmeting aan de 3D-geometrie @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Voeg middelpunten toe @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Voeg kwadrantpunten toe @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Voeg een opgemaakte tekstannotatie @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Onzichtbare randen weergeven/verbergen @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Voeg een verticale afmeting in @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Voeg een verticale expansie-afmeting in @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Voeg lasinformatie toe aan leiderslijn @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Verkeerde selectie @@ -1144,26 +1157,20 @@ Open de tekenweergave voordat u probeert te exporteren naar SVG. - - - - - - - - + + + + + + + Incorrect Selection Onjuiste Selectie - - - Can not make a Dimension from this selection - Kan geen Dimensie van selectie maken - @@ -1201,38 +1208,38 @@ Geselecteerde rand is een BSpline. Diameter zal approximatief zijn. Doorgaan? - + Need two straight edges to make an Angle Dimension Twee rechte randen zijn nodig om een hoekafmeting te verkrijgen - + Need three points to make a 3 point Angle Dimension 3 ponten nodig voor het aanmaken van een Hoek dimensie - + There is no 3D object in your selection Er is geen 3D-object in uw selectie - + There are no 3D Edges or Vertices in your selection Er zijn geen 3D-randen of eindpunten in uw selectie - - + + Please select a View [and Edges]. Gelieve een weergave te selecteren [en randen]. - + Select 2 point objects and 1 View. (1) Selecteer 2 punten en 1 aanzicht. (1) - + Select 2 point objects and 1 View. (2) Selecteer 2 punten en 1 aanzicht. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Selecteer eerst een object - + Too many objects selected Te veel objecten geselecteerd - + Create a page first. Maak eerst een pagina. - + No View of a Part in selection. Geen aanzicht van een onderdeel in de selectie. - + No Feature with Shape in selection. Geen functie met Vorm in Selectie. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Taak in uitvoering - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Sluit het actieve taakvenster en probeer opnieuw. - - - - + + + + Selection Error Selectiefout - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Verkeerde selectie - + Can not attach leader. No base View selected. Kan de leider niet bijvoegen. Geen basisweergave geselecteerd. - - - + + + + You must select a base View for the line. U moet een basisweergave voor deze lijn selecteren. - - + + No DrawViewPart objects in this selection Geen DrawViewPart-objecten in deze selectie - - - - + + + + No base View in Selection. Geen basisweergave in de selectie. - + You must select Faces or an existing CenterLine. U moet vlakken of een bestaand middenlijn selecteren. - + No CenterLine in selection. Geen middenlijn in selectie. - - - + + + Selection is not a CenterLine. Selectie is geen middenlijn. - + Selection not understood. Selectie niet begrepen. - + You must select 2 Vertexes or an existing CenterLine. U moet 2 eindpunten of een bestaande middenlijn selecteren. - + Need 2 Vertices or 1 CenterLine. Vereist 2 eindpunten of 1 middenlijn. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Geen weergave in de selectie. - + You must select a View and/or lines. U moet een aanzicht en/of lijnen selecteren. - + No Part Views in this selection Geen deelweergaves in deze selectie - + Select exactly one Leader line or one Weld symbol. Selecteer precies een leiderslijn of een lassymbool. - - + + Nothing selected Niets geselecteerd - + At least 1 object in selection is not a part view Tenminste 1 object in de selectie is geen deelweergave - + Unknown object type in selection Onbekend objecttype in de selectie @@ -1643,6 +1678,16 @@ Edit Welding Symbol Bewerk lassymbool + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Dan moet u de tegellimiet verhogen. Toon sectieranden - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximale arceerlijnsegmenten om te gebruiken bij de arcering van een vlak met een PAT-patroon - + Line End Cap Shape Vorm van lijneindkap - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Vlakken moeten gedetecteerd worden om gebruik te kunnen maken van arceringen, ma in complexe modellen kan er een prestatieboete worden opgelegd. - + Detect Faces Detecteer vlakken - + Include edges with unexpected geometry (zero length etc.) in results Randen met een onverwachte geometrie (nullengte enz.) in de resultaten opnemen - + Allow Crazy Edges Gekke randen toestaan - + Max SVG Hatch Tiles Max SVG-arceringstegels - + Max PAT Hatch Segments Maximale PAT-arceringssegmenten - + Dimension Format Dimensieformaat - + Override automatic dimension format Automatische afmetingsformaat overschrijven - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Opmerking:</span> items in <span style=" font-style:italic;">cursief</span> zijn standaard waarden voor nieuwe objecten. Ze hebben geen effect op bestaande objecten.</p></body></html> @@ -3594,6 +3639,49 @@ zie de FreeCAD Wiki '2LineCenterLine' voor een beschrijvingBewerking in uitvoering stopgezet. Opnieuw beginnen. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Aanzicht + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Voegt een middenlijn tussen 2 lijnen toe @@ -4564,7 +4652,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Voegt een middenlijn tussen 2 punten toe @@ -4572,7 +4660,7 @@ met behulp van de gegeven X/Y afstand TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Voegt een cosmetisch eindpunt in een weergave in @@ -4580,7 +4668,7 @@ met behulp van de gegeven X/Y afstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Voegt een middenlijn toe aan vlakken @@ -4588,7 +4676,7 @@ met behulp van de gegeven X/Y afstand TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Voeg een horizontale expansie-afmeting in @@ -4596,7 +4684,7 @@ met behulp van de gegeven X/Y afstand TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Voegt cosmetische eindpunten toe aan het midden van de geselecteerde randen @@ -4604,7 +4692,7 @@ met behulp van de gegeven X/Y afstand TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Voegt cosmetische eindpunten toe aan de kwadrantpunten van geselecteerde cirkels @@ -4612,7 +4700,7 @@ met behulp van de gegeven X/Y afstand TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Voeg een verticale expansie-afmeting in diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm index 941b0690c3..71651793a0 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts index 18300a9d4c..83cf5f8c9b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Feil valg @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Lag en side først. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3054,7 +3099,7 @@ Fast, but result is a collection of short straight lines. Auto - Auto + Automatisk @@ -3477,7 +3522,7 @@ Vil du fortsette? Color - Color + Farge @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vis + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3887,7 +3975,7 @@ You can pick further points to get line segments. Color - Color + Farge @@ -3996,7 +4084,7 @@ You can pick further points to get line segments. Color - Color + Farge @@ -4339,7 +4427,7 @@ using the given X/Y Spacing Color - Color + Farge @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index deb319a350..df4dda6720 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 68212ff9c2..430f7a8f8b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj linię środkową pomiędzy 2 linie @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj linię środkową pomiędzy 2 punkty @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Dodaj linię środkową pomiędzy 2 linie @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Dodaj linię środkową pomiędzy 2 punkty - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Wstaw wymiar kąta @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Wstaw adnotację @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Wstaw linię środkową - + Add Centerline to Faces Add Centerline to Faces @@ -183,7 +196,7 @@ Add View to Clip Group - Add View to Clip Group + Dodaj widok do grupy wycinków @@ -196,18 +209,18 @@ Remove View from Clip Group - Remove View from Clip Group + Usuń widok z grupy wycinków CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Zmień wygląd linii @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Zakres poziomy - + Vertical Extent Zakres pionowy @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -395,7 +408,7 @@ Apply Geometric Hatch to Face - Zastosuj geometryczne kreskowanie do twarzy + Zastosuj na powierzchni kreskowanie geometryczne @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Wstaw wymiar poziomy @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,14 +495,14 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View - Add Leaderline to View + Dodaj linię wiodącą do widoku @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Połącz wymiar z geometrią 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Pokaż/Ukryj niewidoczne krawędzie @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Wstaw nowy wymiar pionowy @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -836,7 +849,7 @@ Link (CTRL+L) - Link (CTRL+L) + Link (CTRL+L) @@ -876,7 +889,7 @@ Strike Out - Strike Out + Przekreślenie @@ -891,27 +904,27 @@ Decrease indentation (CTRL+,) - Decrease indentation (CTRL+,) + Zwiększ wcięcie (CTRL+,) Decrease indentation - Decrease indentation + Zmniejszenie wcięć Increase indentation (CTRL+.) - Increase indentation (CTRL+.) + Zwiększ wcięcie (CTRL+.) Increase indentation - Increase indentation + Zmniejszenie wcięć Text foreground color - Text foreground color + Kolor tekstu na pierwszym planie @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Nieprawidłowy wybór @@ -1045,7 +1058,7 @@ No Shapes, Groups or Links in this selection - No Shapes, Groups or Links in this selection + Brak kształtów, grup lub linków w tym zaznaczeniu @@ -1056,12 +1069,12 @@ Select one Clip group and one View. - Select one Clip group and one View. + Wybierz jedną grupę wycinków i jeden widok. Select exactly one View to add to group. - Select exactly one View to add to group. + Wybierz dokładnie jeden widok do dodania do grupy. @@ -1144,26 +1157,20 @@ Otwórz widok rysunku przed próbą eksportu do SVG. - - - - - - - - + + + + + + + Incorrect Selection Niepoprawny wybór - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Potrzebne są dwie proste krawędzie do uzyskania wymiaru kątowego - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection W zaznaczeniu nie ma obiektu 3D - + There are no 3D Edges or Vertices in your selection Nie ma krawędzi 3D lub wierzchołków w zaznaczeniu - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Najpierw wybierz obiekt - + Too many objects selected Wybrano zbyt wiele obiektów - + Create a page first. Najpierw stwórz stronę. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress - Task In Progress + Zadanie w toku - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Czy na pewno chcesz kontynuować? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edytuj symbol spawalniczy + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,15 +1752,15 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Strona nie jest pusta, więc +następujące obiekty powiązane z odniesieniami mogą zostać utracone: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Grupa ta nie może zostać usunięta, ponieważ jej elementy zawierają następujące pozycje: +widoki przekroju lub szczegółów, lub linie prowadzące, które mogłyby zostać uszkodzone: @@ -1727,7 +1772,7 @@ the following referencing objects might be lost: The following referencing object might break: - The following referencing object might break: + Następujący obiekt odniesienia może ulec uszkodzeniu: @@ -1983,7 +2028,7 @@ This directory will be used for the symbol selection. Advanced - Advanced + Zaawansowane @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -2203,7 +2248,7 @@ can be a performance penalty in complex models. Default appearance of cut surface in section view - Default appearance of cut surface in section view + Domyślny wygląd powierzchni cięcia w widoku przekroju @@ -2374,7 +2419,7 @@ can be a performance penalty in complex models. Balloon Shape - Balloon Shape + Kształt balonika @@ -2423,12 +2468,12 @@ can be a performance penalty in complex models. Hidden Line - Hidden Line + Ukryta linia Hidden line color - Hidden line color + Kolor ukrytej linii @@ -2662,22 +2707,22 @@ can be a performance penalty in complex models. Arrow Style - Arrow Style + Styl strzałki Arrowhead style - Arrowhead style + Styl grotu Arrow Size - Arrow Size + Rozmiar strzałki Arrowhead size - Arrowhead size + Rozmiar grotu @@ -2687,7 +2732,7 @@ can be a performance penalty in complex models. Projection Group Angle - Projection Group Angle + Kąt projekcji grupy @@ -2697,12 +2742,12 @@ can be a performance penalty in complex models. First - First + Pierwszy Third - Third + Trzeci @@ -2712,12 +2757,12 @@ can be a performance penalty in complex models. Hidden Line Style - Hidden Line Style + Styl ukrytej linii Style for hidden lines - Style for hidden lines + Styl dla ukrytych linii @@ -2745,7 +2790,7 @@ can be a performance penalty in complex models. Drawing Update - Drawing Update + Aktualizacja rysunku @@ -2816,32 +2861,32 @@ for ProjectionGroups Label size - Label size + Wielkość etykiety Files - Files + Pliki Default Template - Default Template + Domyślny szablon Default template file for new pages - Default template file for new pages + Domyślny plik szablonu dla nowych stron Template Directory - Template Directory + Katalog szablonów Starting directory for menu 'Insert Page using Template' - Starting directory for menu 'Insert Page using Template' + Katalog startowy dla menu 'Wstaw stronę za pomocą szablonu' @@ -2909,12 +2954,12 @@ for ProjectionGroups HLR - HLR + HLR Hidden Line Removal - Hidden Line Removal + Usuwanie ukrytej linii @@ -3029,17 +3074,17 @@ Fast, but result is a collection of short straight lines. Page Scale - Page Scale + Skala strony Default scale for new pages - Default scale for new pages + Domyślna skala dla nowych stron View Scale Type - View Scale Type + Zobacz typ skali @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Widok + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3716,7 +3804,7 @@ Custom: custom scale factor is used Apply Geometric Hatch to Face - Zastosuj geometryczne kreskowanie do twarzy + Zastosuj na powierzchni kreskowanie geometryczne @@ -3779,7 +3867,7 @@ Custom: custom scale factor is used Apply Hatch to Face - Apply Hatch to Face + Zastosuj na powierzchni kreskowanie @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodaj linię środkową pomiędzy 2 linie @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodaj linię środkową pomiędzy 2 punkty @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4596,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm index 0562cff74b..362fac1def 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index 6d1810b422..b49e8ef2cd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha central aos dois pontos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Adicionar ponto central aos vértices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Points Adicionar linha central aos dois pontos - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - Desenhos Técnicos - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw - Desenhos Técnicos + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - Desenhos Técnicos - + Insert Annotation Inserir anotação @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Center Line Inserir Linha Central - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - Desenhos Técnicos - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - Desenhos Técnicos - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - Desenhos Técnicos - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - Desenhos Técnicos - + Add Midpoint Vertices Adicionar ponto central aos vértices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - Desenhos Técnicos - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - Desenhos Técnicos - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - Desenhos Técnicos - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - Desenhos Técnicos - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - Desenhos Técnicos - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Seleção errada @@ -1144,26 +1157,20 @@ Abra a folha de desenho antes de tentar a exportação de SVG. - - - - - - - - + + + + + + + Incorrect Selection Seleção Incorreta - - - Can not make a Dimension from this selection - Não é possível criar uma cota para esta seleção - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension São precisas duas arestas retas para criar uma cota de ângulo - + Need three points to make a 3 point Angle Dimension São necessários três pontos para fazer uma cota de ângulo com 3 pontos - + There is no 3D object in your selection Não há nenhum objeto 3D na sua seleção - + There are no 3D Edges or Vertices in your selection Não existem arestas ou vértices 3D na sua seleção - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Selecione um objeto primeiro - + Too many objects selected Demasiados objetos selecionados - + Create a page first. Primeiro, crie uma página. - + No View of a Part in selection. Nenhuma vista de uma peça na seleção. - + No Feature with Shape in selection. Nenhum objeto com forma na seleção. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tarefa em andamento - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vista + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4596,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm index 7cf7f93917..cbed3ec391 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index f97c241d69..54cbdd0157 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Adicionar vértices de ponto médio @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Adicionar vértices do Quadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw (Desenhos Técnicos) - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw (Desenhos Técnicos) + + + Insert 3-Point Angle Dimension Inserir cotagem de Ângulo por 3-Pontos @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Angle Dimension Inserir cotagem de ângulo @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Annotation Inserir anotação @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Center Line Inserir Linha de Eixo - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw (Desenhos Técnicos) - + Remove Cosmetic Object Remover objeto cosmético @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Cosmetic Vertex Inserir Vértice Cosmético - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw (Desenhos Técnicos) - + Change Appearance of Lines Alterar Aparência das Linhas @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Extent Dimension Inserir cotagem extensão - + Horizontal Extent Extensão horizontal - + Vertical Extent Extensão vertical @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Horizontal Dimension Inserir cotagem horizontal @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Horizontal Extent Dimension Inserir cotagem Extensão Horizontal @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Landmark Dimension - EXPERIMENTAL Inserir cotagem de ponto de referência - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Leaderline to View Adicionar Linha de chamada na Vista @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Link Dimension to 3D Geometry Ligar cotagem à Geometria 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw (Desenhos Técnicos) - + Add Midpoint Vertices Adicionar vértices de ponto médio @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw (Desenhos Técnicos) - + Add Quadrant Vertices Adicionar vértices do Quadrante @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Rich Text Annotation Inserir anotação de Rich Text @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw (Desenhos Técnicos) - + Show/Hide Invisible Edges Mostrar/Ocultar arestas invisíveis @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Vertical Dimension Inserir cotagem vertical @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Vertical Extent Dimension Inserir cotagem Extensão Vertical @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw (Desenhos Técnicos) - + Add Welding Information to Leaderline Adicionar Linha de chamada com Informações de soldadura @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Seleção errada @@ -1144,26 +1157,20 @@ Abra a folha de desenho antes de tentar a exportação de SVG. - - - - - - - - + + + + + + + Incorrect Selection Seleção Incorreta - - - Can not make a Dimension from this selection - Não pode fazer uma cotagem desta selecção - @@ -1201,38 +1208,38 @@ A aresta selecionada é uma BSpline. O diâmetro será aproximado. Continuar? - + Need two straight edges to make an Angle Dimension São precisas duas arestas retas para criar uma cotagem de ângulo - + Need three points to make a 3 point Angle Dimension São precisos de três pontos para fazer uma cotagem de ângulo com 3 pontos - + There is no 3D object in your selection Não há nenhum objeto 3D na sua seleção - + There are no 3D Edges or Vertices in your selection Não existem arestas ou vértices 3D na sua seleção - - + + Please select a View [and Edges]. Por favor, selecione uma vista [e arestas]. - + Select 2 point objects and 1 View. (1) Selecionar 2 pontos e 1 vista. (1) - + Select 2 point objects and 1 View. (2) Selecione 2 pontos e 1 vista. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Selecione um objeto primeiro - + Too many objects selected Demasiados objetos selecionados - + Create a page first. Primeiro, crie uma página. - + No View of a Part in selection. Nenhuma vista de uma peça na seleção. - + No Feature with Shape in selection. Nenhum recurso com forma de seleção. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tarefa em execução - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Fechar a caixa de diálogo ativa e tentar novamente. - - - - + + + + Selection Error Erro de seleção - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Seleção errada - + Can not attach leader. No base View selected. Não é possível anexar chamada. Nenhuma vista base selecionada. - - - + + + + You must select a base View for the line. Deve selecionar uma vista base para a linha. - - + + No DrawViewPart objects in this selection Não há objetos de desenho nesta seleção - - - - + + + + No base View in Selection. Nenhuma vista base na seleção. - + You must select Faces or an existing CenterLine. Deve selecionar Faces ou uma linha de eixo. - + No CenterLine in selection. Não há linha de eixo na seleção. - - - + + + Selection is not a CenterLine. A seleção não é uma linha de eixo. - + Selection not understood. Seleção não compreendida. - + You must select 2 Vertexes or an existing CenterLine. Deve selecionar 2 vértices ou uma linha de eixo existente. - + Need 2 Vertices or 1 CenterLine. Precisa de 2 vértices ou 1 linha de eixo. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Nenhuma vista na seleção. - + You must select a View and/or lines. Deve selecionar uma vista e/ou linhas. - + No Part Views in this selection Não há vistas de peças nesta seleção - + Select exactly one Leader line or one Weld symbol. Selecione apenas uma linha de chamada ou um símbolo de soldadura. - - + + Nothing selected Nada selecionado - + At least 1 object in selection is not a part view Pelo menos 1 objeto na seleção não é uma vista de peça - + Unknown object type in selection Tipo de objeto desconhecido na seleção @@ -1643,6 +1678,16 @@ Edit Welding Symbol Editar Símbolo de soldadura + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Ver + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Inserir cotagem Extensão Horizontal @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Inserir cotagem Extensão Vertical diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm index a28a296f2f..f94a88e165 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 3680207ff3..9178c8cd44 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Desen tehnic - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Desen tehnic + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Desen tehnic - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Desen tehnic - + Insert Annotation Inserare adnotare @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Desen tehnic - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Desen tehnic - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Desen tehnic - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Desen tehnic - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Desen tehnic - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Desen tehnic - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Desen tehnic - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Desen tehnic - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Desen tehnic - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Desen tehnic - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Desen tehnic - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Desen tehnic - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Desen tehnic - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Desen tehnic - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Desen tehnic - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Desen tehnic - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw Desen tehnic - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Desen tehnic - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Desen tehnic - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Selecţie greşită @@ -1144,26 +1157,20 @@ Deschide vederea în plan înainte de a încerca exportul ca SVG. - - - - - - - - + + + + + + + Incorrect Selection Selectarea incorectă - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Aveți nevoie de două margini drepte pentru a face o cotă de unghi - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Nu există nici un obiect 3D în selecţia dvs - + There are no 3D Edges or Vertices in your selection Există margini 3D sau noduri în selecţia dvs - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Selectaţi un obiect mai întâi - + Too many objects selected Prea multe obiecte selectate - + Create a page first. Creați /selectați o pagină mai întâi. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vizualizare + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm index 4c7e941a77..700162bf44 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 948052f8ae..62d687a30c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Добавить осевую линию между 2 линиями @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Добавить осевую линию между 2 точками @@ -20,28 +20,28 @@ CmdMidpoints - + Add Midpoint Vertices - Добавить вершины средней точки + Добавить Средние Вершины CmdQuadrants - + Add Quadrant Vertices - Добавить вершины в четвертях + Добавить Вершины Квадрантов CmdTechDraw2LineCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Lines Добавить осевую линию между 2 линиями @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Points Добавить осевую линию между 2 точками - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Технический чертёж - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Технический чертёж + + + Insert 3-Point Angle Dimension Вставить Угловой размер по 3 точкам @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Технический чертёж - + Insert Angle Dimension Вставить Угловой размер @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Технический чертёж - + Insert Annotation Вставить заметку @@ -126,7 +139,7 @@ Insert a View of a Section Plane from Arch Workbench - Вставить вид Секущей плоскости из верстака Arch + Вставить вид Плоскости Сечения из верстака Arch @@ -139,25 +152,25 @@ Insert Balloon Annotation - Вставить примечание в баллоне + Вставить примечание в выноске CmdTechDrawCenterLineGroup - + TechDraw Технический чертёж - + Insert Center Line Вставить осевую линию - + Add Centerline to Faces - Добавить осевую линию к грани + Добавить осевую линию к Граням @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Технический чертёж - + Remove Cosmetic Object Удалить косметический объект @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Технический чертёж - + Add Cosmetic Vertex Добавить Косметическую вершину @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Технический чертёж - + Insert Cosmetic Vertex Вставить косметическую вершину - + Add Cosmetic Vertex Добавить Косметическую вершину @@ -246,14 +259,14 @@ CmdTechDrawDecorateLine - + TechDraw Технический чертёж - + Change Appearance of Lines - Изменить тип Линии + Изменить внешний вид линий @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Технический чертёж - + Insert Extent Dimension Вставить размер габаритов - + Horizontal Extent Горизонтальный габарит - + Vertical Extent Вертикальный габарит @@ -375,14 +388,14 @@ CmdTechDrawFaceCenterLine - + TechDraw Технический чертёж - + Add Centerline to Faces - Добавить осевую линию к грани + Добавить осевую линию к Граням @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Технический чертёж - + Insert Horizontal Dimension Вставить Горизонтальный размер @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Технический чертёж - + Insert Horizontal Extent Dimension Вставить Горизонтальный размер габарита @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Технический чертёж - + Insert Landmark Dimension - EXPERIMENTAL Вставить Размер знака - ЭКСПЕРИМЕНТАЛЬНО @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Технический чертёж - + Add Leaderline to View Добавить Указательную линию на Вид @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Технический чертёж - + Link Dimension to 3D Geometry Связать размер с 3D геометрией @@ -521,14 +534,14 @@ CmdTechDrawMidpoints - + TechDraw Технический чертёж - + Add Midpoint Vertices - Добавить вершины средней точки + Добавить Средние Вершины @@ -582,20 +595,20 @@ Insert multiple linked views of drawable object(s) - Вставить несколько связанных видов чертежного(ых) объекта(ов) + Вставка нескольких связанных видов объектов чертежа CmdTechDrawQuadrants - + TechDraw Технический чертёж - + Add Quadrant Vertices - Добавить вершины в четвертях + Добавить Вершины Квадрантов @@ -627,14 +640,14 @@ CmdTechDrawRichTextAnnotation - + TechDraw Технический чертёж - + Insert Rich Text Annotation - Вставить расширенную текстовую Аннотацию + Вставка аннотаций форматированным текстом @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Технический чертёж - + Show/Hide Invisible Edges Показать/скрыть невидимые края @@ -716,25 +729,25 @@ CmdTechDrawVerticalDimension - + TechDraw Технический чертёж - + Insert Vertical Dimension - Вставить вертикальный размер + Задать вертикальный размер CmdTechDrawVerticalExtentDimension - + TechDraw Технический чертёж - + Insert Vertical Extent Dimension Вставить Вертикальный размер габарита @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Технический чертёж - + Add Welding Information to Leaderline Добавить информацию о сварке в указательную линию @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Неправильный выбор @@ -1111,7 +1124,7 @@ Please select only 1 Arch Section. - Please select only 1 Arch Section. + Выберите только одно архитектурное сечение. @@ -1144,26 +1157,20 @@ Открыть вид чертежа перед экспортом в SVG. - - - - - - - - + + + + + + + Incorrect Selection Некорректный выбор - - - Can not make a Dimension from this selection - Не удается создать размер из выбранного - @@ -1201,38 +1208,38 @@ Выбранная грань - BSpline. Диаметр будет приблизительным. Продолжить? - + Need two straight edges to make an Angle Dimension Необходимы две прямых линии, чтобы создать угловой размер - + Need three points to make a 3 point Angle Dimension Необходимы три точки, чтобы создать угловой размер по точкам - + There is no 3D object in your selection В вашем выборе нет 3D объекта - + There are no 3D Edges or Vertices in your selection Вы вашем выборе нет ребер или вершин - - + + Please select a View [and Edges]. Пожалуйста, выберите Вид [и Грани]. - + Select 2 point objects and 1 View. (1) Выберите 2 точечные объекты и 1 Вид. (1) - + Select 2 point objects and 1 View. (2) Выберите 2 точечные объекты и 1 Вид. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Сначала выберите объект - + Too many objects selected Выбрано слишком много объектов - + Create a page first. Сначала создайте страницу. - + No View of a Part in selection. Нет видов детали в выбранном. - + No Feature with Shape in selection. Нет элемента с формой в выбранном. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Задача в процессе - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Закройте окно активной задачи и повторите снова. - - - - + + + + Selection Error Ошибка выбора - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Неправильный выбор - + Can not attach leader. No base View selected. Не могу прикрепить указательную линию. Базовый вид не выбран. - - - + + + + You must select a base View for the line. Необходимо выбрать базовый вид для линии. - - + + No DrawViewPart objects in this selection Нет объектов DrawViewPart в выбранном - - - - + + + + No base View in Selection. Нет базового вида в выбранном. - + You must select Faces or an existing CenterLine. - You must select Faces or an existing CenterLine. + Вы должны выбрать Грани или существующую Осевую Линию. - + No CenterLine in selection. В выбранном нет ОсевойЛинии. - - - + + + Selection is not a CenterLine. Выделение не является центральной линией. - + Selection not understood. Выделение не понятно. - + You must select 2 Vertexes or an existing CenterLine. Вы должны выбрать 2 Вершины или существующую ОсевуюЛинию. - + Need 2 Vertices or 1 CenterLine. Требуется две вершины или одна центральная линия. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. Нет Вида в выделенном. - + You must select a View and/or lines. Вы должны выбрать Вид и/или линии. - + No Part Views in this selection Нет видов Детали в этом выборе - + Select exactly one Leader line or one Weld symbol. Выберите только одну Указательную линию или один символ Сварки. - - + + Nothing selected Ничего не выбрано - + At least 1 object in selection is not a part view Минимум 1 объект в выбранном не является местным видом - + Unknown object type in selection Неизвестный тип объекта в выбранном @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Вы уверены, что хотите продолжить? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Изменить символ сварки + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,27 +1752,27 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Страница не пуста, поэтому +следующие ссылки на объекты могут быть потеряны: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Группа не может быть удалена, потому что её элементы имеют следующие +сечения или подробные виды, или размерные линии, которые могут быть повреждены: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Группа Проекции не пуста, поэтому +следующие ссылки на объекты могут быть потеряны: The following referencing object might break: - The following referencing object might break: + Следующие ссылки на объекты могут быть разорваны: @@ -1799,7 +1844,7 @@ the top and left view border Width of lines in generated view - Width of lines in generated view + Ширина линий на сгенерированном виде @@ -1829,7 +1874,7 @@ the top and left view border Wireframe overlay - Wireframe overlay + Каркасное наложение @@ -1839,7 +1884,7 @@ the top and left view border Bounding box - Bounding box + Ограничительная рамка @@ -1893,12 +1938,12 @@ the top and left view border Flips the sides - Flips the sides + ‎Перевернуть‎‎ стороны‎ Flip Sides - Flip Sides + Перевернутые Стороны @@ -1919,8 +1964,7 @@ the top and left view border Adds the 'Field Weld' symbol (flag) at the kink in the leader line - Adds the 'Field Weld' symbol (flag) -at the kink in the leader line + Добавить символ (флаг) 'Field Weld' на линию выноски @@ -1931,8 +1975,7 @@ at the kink in the leader line Adds the 'All Around' symbol (circle) at the kink in the leader line - Adds the 'All Around' symbol (circle) -at the kink in the leader line + Добавить символ (окружность) 'Field Weld' на линию выноски @@ -1942,7 +1985,7 @@ at the kink in the leader line Offsets the lower symbol to indicate alternating welds - Offsets the lower symbol to indicate alternating welds + Смещение нижнего символа для обозначения чередования сварки @@ -1953,8 +1996,8 @@ at the kink in the leader line Directory to welding symbols. This directory will be used for the symbol selection. - Directory to welding symbols. -This directory will be used for the symbol selection. + Каталог для символов сварки. +Этот каталог будет использоваться для выбора символа. @@ -1989,13 +2032,13 @@ This directory will be used for the symbol selection. Shape of line end caps. Only change unless you know what you are doing! - Shape of line end caps. -Only change unless you know what you are doing! + Форма концов линий. +Изменяйте только, если вы знаете, что делаете! Round - Round + Круглый @@ -2012,14 +2055,14 @@ Only change unless you know what you are doing! Limit of 64x64 pixel SVG tiles used to hatch a single face. For large scalings you might get an error about to many SVG tiles. Then you need to increase the tile limit. - Limit of 64x64 pixel SVG tiles used to hatch a single face. -For large scalings you might get an error about to many SVG tiles. -Then you need to increase the tile limit. + Ограничение в 64x64 пикселей для SVG фрагментов, используемых в штриховке одной грани. +При больших масштабах может возникнуть ошибка из-за большого количества SVG фрагментов. +Тогда вам нужно увеличить это ограничение. Dump intermediate results during Detail view processing - Dump intermediate results during Detail view processing + Дамп промежуточных результатов во время обработки Подробного вида @@ -2039,7 +2082,7 @@ Then you need to increase the tile limit. Dump intermediate results during Section view processing - Dump intermediate results during Section view processing + Дамп промежуточных результатов при обработке вида Сечение @@ -2049,7 +2092,7 @@ Then you need to increase the tile limit. Perform a fuse operation on input shape(s) before Section view processing - Perform a fuse operation on input shape(s) before Section view processing + Перед обработкой вида Сечение выполнить операцию слияния исходных форм @@ -2059,7 +2102,7 @@ Then you need to increase the tile limit. Highlights border of section cut in section views - Highlights border of section cut in section views + Выделение границы сечения на видах сечения @@ -2067,67 +2110,66 @@ Then you need to increase the tile limit. Показать рёбра Сечения - + Maximum hatch line segments to use when hatching a face with a PAT pattern - Maximum hatch line segments to use -when hatching a face with a PAT pattern + Максимальное количество используемых сегментов линий штриховки +при штриховке грани с помощью шаблона PAT - + Line End Cap Shape - Line End Cap Shape + Форма конца линии - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - If checked, TechDraw will attempt to build faces using the -line segments returned by the hidden line removal algorithm. -Faces must be detected in order to use hatching, but there -can be a performance penalty in complex models. + Если флажок установлен, TechDraw попытается построить грани с помощью +сегментов линии, возвращаемых алгоритмом Удаления скрытой линии. +Для использования штриховки грани должны быть обнаружены, однако возможно снижение производительности на сложных моделях. - + Detect Faces Обнаружить грани - - - Include edges with unexpected geometry (zero length etc.) in results - Include edges with unexpected geometry (zero length etc.) in results - + Include edges with unexpected geometry (zero length etc.) in results + Добавить в результаты ребера с неожиданной геометрией (нулевой длиной и т. д.) + + + Allow Crazy Edges - Allow Crazy Edges + Разрешить безумные края - + Max SVG Hatch Tiles - Max SVG Hatch Tiles + Максимум фрагментов штриховки SVG - + Max PAT Hatch Segments - Max PAT Hatch Segments + Максимум сегментов штриховки PAT - + Dimension Format Формат размера - + Override automatic dimension format - Override automatic dimension format + Переопределить автоматический формат размера - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -2228,17 +2270,17 @@ can be a performance penalty in complex models. Forces last leader line segment to be horizontal - Forces last leader line segment to be horizontal + Приводит последний сегмент линии выноски в горизонтальное положение Leader Line Auto Horizontal - Leader Line Auto Horizontal + Автоматическая горизонтальность линии выноски Length of balloon leader line kink - Length of balloon leader line kink + Длина изгиба линии выноски @@ -2248,7 +2290,7 @@ can be a performance penalty in complex models. Shape of balloon annotations - Shape of balloon annotations + Форма всплывающего примечания @@ -2289,12 +2331,12 @@ can be a performance penalty in complex models. Balloon Leader End - Balloon Leader End + Форма Конца Выноски Standard to be used to draw section lines - Standard to be used to draw section lines + Стандарт, используемый для построения линий сечения @@ -2309,7 +2351,7 @@ can be a performance penalty in complex models. Outline shape for detail views - Outline shape for detail views + Форма контура для детального вида @@ -2334,37 +2376,37 @@ can be a performance penalty in complex models. Default name in LineGroup CSV file - Default name in LineGroup CSV file + Имя по умолчанию в CSV-файле LineGroup Detail View Outline Shape - Detail View Outline Shape + Детальный вид формы контура Style for balloon leader line ends - Style for balloon leader line ends + Стиль для концов линий выноски Length of horizontal portion of Balloon leader - Length of horizontal portion of Balloon leader + Длина горизонтальной части выноски Ballon Leader Kink Length - Ballon Leader Kink Length + Длина перегиба выноски Restrict Filled Triangle line end to vertical or horizontal directions - Restrict Filled Triangle line end to vertical or horizontal directions + Ограничить конец линии закрашенного треугольника в вертикальном или горизонтальном направлении Balloon Orthogonal Triangle - Balloon Orthogonal Triangle + Ортогональный треугольник выноски @@ -2374,7 +2416,7 @@ can be a performance penalty in complex models. Balloon Shape - Balloon Shape + Форма всплывающего примечания @@ -2384,7 +2426,7 @@ can be a performance penalty in complex models. Print Center Marks - Print Center Marks + Печатать Центральные Метки @@ -2394,12 +2436,12 @@ can be a performance penalty in complex models. Detail Highlight Style - Detail Highlight Style + Стиль Выделения Подробностей <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -2418,7 +2460,7 @@ can be a performance penalty in complex models. Normal line color - Normal line color + Обычный цвет линии @@ -2553,7 +2595,7 @@ can be a performance penalty in complex models. Leaderline - Leaderline + Линия выноски @@ -2563,7 +2605,7 @@ can be a performance penalty in complex models. <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -2577,47 +2619,47 @@ can be a performance penalty in complex models. Standard and Style - Standard and Style + ‎Стандарт и ‎‎стиль‎ Standard to be used for dimensional values - Standard to be used for dimensional values + Стандарт, используемый для размерных значений ISO Oriented - ISO Oriented + Ориентирован на ISO ISO Referencing - ISO Referencing + Ссылка на ISO ASME Inlined - ASME Inlined + Интегрированный ASME ASME Referencing - ASME Referencing + Ссылка на ASME Use system setting for number of decimals - Use system setting for number of decimals + Использовать системные настройки для количества десятичных знаков Use Global Decimals - Use Global Decimals + Использовать глобальную десятичную точность Append unit to dimension values - Append unit to dimension values + Добавить единицы измерения к значениям размеров @@ -2627,12 +2669,12 @@ can be a performance penalty in complex models. Alternate Decimals - Alternate Decimals + Альтернативные десятичные Number of decimals if 'Use Global Decimals' is not used - Number of decimals if 'Use Global Decimals' is not used + Количество десятичных разрядов, если ' Use Global Decimal' не используется @@ -2642,22 +2684,22 @@ can be a performance penalty in complex models. Dimension text font size - Dimension text font size + Размер шрифта текста размера Diameter Symbol - Diameter Symbol + Символ диаметра Character used to indicate diameter dimensions - Character used to indicate diameter dimensions + Символ, используемый для указания размеров диаметра ⌀ - ⌀ + ⌀ @@ -2712,12 +2754,12 @@ can be a performance penalty in complex models. Hidden Line Style - Hidden Line Style + Стиль скрытой линии Style for hidden lines - Style for hidden lines + Стиль для скрытых линий @@ -2732,7 +2774,7 @@ can be a performance penalty in complex models. <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -2745,29 +2787,29 @@ can be a performance penalty in complex models. Drawing Update - Drawing Update + Обновление чертежа Whether or not pages are updated every time the 3D model is changed - Whether or not pages are updated every time the 3D model is changed + Обновляются ли страницы при каждом изменении 3D модели Update With 3D (global policy) - Update With 3D (global policy) + Обновить с 3D (глобальная политика) Whether or not a page's 'Keep Updated' property can override the global 'Update With 3D' parameter - Whether or not a page's 'Keep Updated' property -can override the global 'Update With 3D' parameter + Независимо от свойства страницы 'Сохранить обновление' + переопределить глобальный параметр 'Обновление с 3D' Allow Page Override (global policy) - Allow Page Override (global policy) + Разрешить переопределение страницы (глобальная политика) @@ -2780,44 +2822,44 @@ This can slow down the response time. Keep Page Up To Date - Keep Page Up To Date + Поддерживать актуальность страниц Automatically distribute secondary views for ProjectionGroups - Automatically distribute secondary views -for ProjectionGroups + Автоматическое распределение вторичных видов +для ProjureGroups Auto-distribute Secondary Views - Auto-distribute Secondary Views + Автораспределение Вторичных Видов Labels - Labels + Метки Label Font - Label Font + Шрифт метки Label Size - Label Size + Размер метки Font for labels - Font for labels + Шрифт для меток Label size - Label size + Размер метки @@ -2842,47 +2884,47 @@ for ProjectionGroups Starting directory for menu 'Insert Page using Template' - Starting directory for menu 'Insert Page using Template' + Начальный каталог для меню 'Вставка страницы с помощью шаблона' Hatch Pattern File - Hatch Pattern File + Файл образца штриховки Default SVG or bitmap file for hatching - Default SVG or bitmap file for hatching + Файл SVG или растрового изображения для штриховки по умолчанию Line Group File - Line Group File + Файл группы линий Alternate file for personal LineGroup definition - Alternate file for personal LineGroup definition + Альтернативный файл для определения персонального LineGroup Welding Directory - Welding Directory + Папка для сварки Default directory for welding symbols - Default directory for welding symbols + Каталог символов сварки по умолчанию PAT File - PAT File + PAT файл Default PAT pattern definition file for geometric hatching - Default PAT pattern definition file for geometric hatching + Файл определения шаблона PAT по умолчанию для геометрической штриховки @@ -2892,7 +2934,7 @@ for ProjectionGroups Name of the default PAT pattern - Name of the default PAT pattern + Название шаблона PAT по умолчанию @@ -2902,7 +2944,7 @@ for ProjectionGroups <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -2910,23 +2952,23 @@ for ProjectionGroups HLR - HLR + HLR Hidden Line Removal - Hidden Line Removal + Удаление скрытой линии Show seam lines - Show seam lines + Показать линии шва Show Seam Lines - Show Seam Lines + Показать Линии Шва @@ -2937,56 +2979,55 @@ for ProjectionGroups Show Smooth Lines - Show Smooth Lines + Показать Сглаженные Линии Show hard and outline edges (always shown) - Show hard and outline edges (always shown) + Показать жесткие и контурные края (всегда показаны) Show Hard Lines - Show Hard Lines + Показать жесткие линии Use an approximation to find hidden lines. Fast, but result is a collection of short straight lines. - Use an approximation to find hidden lines. -Fast, but result is a collection of short straight lines. + Использовать аппроксимацию для поиска скрытых линий. Быстро, но результат - это коллекция коротких прямых линий. Use Polygon Approximation - Use Polygon Approximation + Использовать Полигональную аппроксимацию Make lines of equal parameterization - Make lines of equal parameterization + Сделать линии с равными параметрами Show UV ISO Lines - Show UV ISO Lines + Показать линии UV ISO Show hidden smooth edges - Show hidden smooth edges + Показать скрытые сглаженные рёбра Show hidden seam lines - Show hidden seam lines + Показать скрытые линии шва Show hidden equal parameterization lines - Show hidden equal parameterization lines + Показать скрытые линии с одинаковыми параметрами @@ -2996,27 +3037,27 @@ Fast, but result is a collection of short straight lines. Hidden - Hidden + Скрыто Show hidden hard and outline edges - Show hidden hard and outline edges + Показать скрытые жесткие и контурные ребра ISO Count - ISO Count + Количество изопараметрических линий Number of ISO lines per face edge - Number of ISO lines per face edge + Количество изопараметрических линий на ребро грани <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -3030,22 +3071,22 @@ Fast, but result is a collection of short straight lines. Page Scale - Page Scale + Масштаб страницы Default scale for new pages - Default scale for new pages + Масштаб по умолчанию для новых страниц View Scale Type - View Scale Type + Тип масштаба Вида Default scale for new views - Default scale for new views + Масштаб по умолчанию для новых видов @@ -3065,12 +3106,12 @@ Fast, but result is a collection of short straight lines. View Custom Scale - View Custom Scale + Пользовательский масштаб Default scale for views if 'View Scale Type' is 'Custom' - Default scale for views if 'View Scale Type' is 'Custom' + Масштаб по умолчанию для видов, если параметр 'Тип масштаба вида' имеет значение 'Пользовательский' @@ -3081,85 +3122,85 @@ Fast, but result is a collection of short straight lines. Selection area around center marks Each unit is approx. 0.1 mm wide - Selection area around center marks -Each unit is approx. 0.1 mm wide + Область выбора вокруг центральной отметки +Ширина каждой единицы приблизительно 0,1 мм Size of selection area around edges Each unit is approx. 0.1 mm wide - Size of selection area around edges -Each unit is approx. 0.1 mm wide + Размер области выбора по краям +Ширина каждого блока приблизительно 0,1 мм Mark Fuzz - Mark Fuzz + Область выбора вокруг центральных маркеров Edge Fuzz - Edge Fuzz + Размер области выделения вокруг ребра Size Adjustments - Size Adjustments + Корректировки размера Tolerance font size adjustment. Multiplier of dimension font size. - Tolerance font size adjustment. Multiplier of dimension font size. + Допустимое изменение размера шрифта. Множитель размера шрифта. Size of template field click handles - Size of template field click handles + Размер области клика в шаблоне Vertex Scale - Vertex Scale + Масштаб вершины Size of center marks. Multiplier of vertex size. - Size of center marks. Multiplier of vertex size. + Размер центральных меток. Множитель размера вершины. Scale of vertex dots. Multiplier of line width. - Scale of vertex dots. Multiplier of line width. + ‎Масштаб‎‎ ‎‎точек вершины‎‎ ‎‎. Множитель ‎‎ширины линии.‎. Center Mark Scale - Center Mark Scale + Масштаб Центральной метки Tolerance Text Scale - Tolerance Text Scale + Допустимый Масштаб Текста Template Edit Mark - Template Edit Mark + Метка редактирования шаблона Welding Symbol Scale - Welding Symbol Scale + Масштаб символа сварки Multiplier for size of welding symbols - Multiplier for size of welding symbols + Множитель для размера символов сварки <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Примечание:</span> Элементы выделенные <span style=" font-style:italic;">курсивом</span> являются значениями по умолчанию для новых объектов. Они не влияют на существующие объекты.</p></body></html> @@ -3354,7 +3395,7 @@ Do you want to continue? Scale factor for the 'Shape' - Scale factor for the 'Shape' + Коэффициент масштабирования для 'Формы' @@ -3374,17 +3415,17 @@ Do you want to continue? Leader line width - Leader line width + Толщина линии выноски Leader Kink Length: - Leader Kink Length: + Длина изгиба выноски: Length of balloon leader line kink - Length of balloon leader line kink + Длина изгиба линии выноски @@ -3435,10 +3476,10 @@ Do you want to continue? - lines: in equal distance to the lines and with half of the angle the lines have to each other - points: in equal distance to the points - centerline between -- lines: in equal distance to the lines and with - half of the angle the lines have to each other -- points: in equal distance to the points + осевая линия между +- линиями: на равном расстоянии от линий и + с половиной угла между линиями +- точки: на равном расстоянии от точек @@ -3499,8 +3540,8 @@ Do you want to continue? Flips endpoints of selected lines for centerline creation, see the FreeCAD Wiki '2LineCenterLine' for a description - Flips endpoints of selected lines for centerline creation, -see the FreeCAD Wiki '2LineCenterLine' for a description + Разворот конечных точек выбранных линий для создания осевых линий, +описание см. в Wiki FreeCAD '2LineCenterLine ' @@ -3563,7 +3604,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Position from the view center - Position from the view center + Позиция из центра вида @@ -3596,12 +3637,55 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Редактирование прекращено. Начать сначала. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Вид + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail Detail Anchor - Detail Anchor + Подробная привязка @@ -3616,12 +3700,12 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Click to drag detail highlight to new position - Click to drag detail highlight to new position + Щелкните, чтобы перетащить подсветку в новое положение Drag Highlight - Drag Highlight + Перетащить выделение @@ -3631,7 +3715,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description size of detail view - size of detail view + размер подробного вида @@ -3639,10 +3723,10 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page Custom: custom scale factor is used - Page: scale factor of page is used -Automatic: if the detail view is larger than the page, - it will be scaled down to fit into the page -Custom: custom scale factor is used + Страница: используется коэффициент масштабирования страницы +Автоматический: если подробный вид больше страницы, + он будет уменьшен, чтобы вписаться в страницу +Пользовательский: используется пользовательский коэффициент масштабирования @@ -3662,7 +3746,7 @@ Custom: custom scale factor is used Scale Type - Scale Type + Тип масштабирования @@ -3682,17 +3766,17 @@ Custom: custom scale factor is used x position of detail highlight within view - x position of detail highlight within view + x положение выделения деталей в пределах вида reference label - reference label + ссылочная метка y position of detail highlight within view - y position of detail highlight within view + y позиция выделения детали на виде @@ -3781,7 +3865,7 @@ Custom: custom scale factor is used Apply Hatch to Face - Apply Hatch to Face + Применить штриховку к грани @@ -4245,33 +4329,33 @@ You can pick further points to get line segments. Distributes projections automatically using the given X/Y Spacing - Distributes projections automatically -using the given X/Y Spacing + Автоматическое распределение проекций +с использованием заданного интервала X/Y Auto Distribute - Auto Distribute + Автораспределение Horizontal space between border of projections - Horizontal space between border of projections + Горизонтальное пространство между границами проекций X Spacing - X Spacing + Отступ по горизонтали Y Spacing - Y Spacing + Отступ по вертикали Vertical space between border of projections - Vertical space between border of projections + Вертикальное пространство между границами проекций @@ -4453,7 +4537,7 @@ using the given X/Y Spacing Scale factor for the section view - Scale factor for the section view + Коэффициент масштабирования для вида сечения @@ -4468,7 +4552,7 @@ using the given X/Y Spacing Position from the 3D origin of the object in the view - Position from the 3D origin of the object in the view + Положение от нулевой 3D координаты объекта на виде @@ -4499,12 +4583,12 @@ using the given X/Y Spacing Nothing to apply. No section direction picked yet - Nothing to apply. No section direction picked yet + Нечего применять. Направление раздела пока не выбрано Can not continue. Object * %1 * not found. - Can not continue. Object * %1 * not found. + Невозможно продолжить. Объект * %1 * не найден. @@ -4558,7 +4642,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Добавить ОсевуюЛинию между 2 Линиями @@ -4566,7 +4650,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Добавить ОсевуюЛинию между 2 Точками @@ -4574,7 +4658,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Вставить косметическую вершину в вид @@ -4582,7 +4666,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Добавить Осевую линию к Граням @@ -4590,7 +4674,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Вставить Горизонтальный размер габарита @@ -4598,15 +4682,15 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges - Inserts Cosmetic Vertices at Midpoint of selected Edges + Вставить косметические вершины в середину выбранных ребер TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Вставить косметическую Вершину на точках четверти выбранной Окружности @@ -4614,7 +4698,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Вставить Вертикальный размер габарита diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm index 33b91237ad..0d04b20274 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts index 4aca68816e..4388113f89 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Vložiť anotáciu @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Chybný výber @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. Create a page first. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Výber je prázdny. + + + + Not enough points in selection. + Nedostatok bodov vo výbere. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Pohľad + + + + + 2d Point + 2. bod + + + + + 3d Point + 3. bod + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm index ba4a8da329..911802e9ef 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 73e5b850a0..37f3f4421a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj središčnico med dve točki @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodaj razpolovišča @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodaj četrtinska oglišča @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Points Dodaj središčnico med dve točki - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TehRisanje - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TehRisanje + + + Insert 3-Point Angle Dimension Vstavi tritočkovno kotno koto @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TehRisanje - + Insert Angle Dimension Vstavi kotno koto @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TehRisanje - + Insert Annotation Vstavi Opombo @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TehRisanje - + Insert Center Line Vstavi središčnico - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TehRisanje - + Remove Cosmetic Object Odstrani dopolnilni predmet @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TehRisanje - + Add Cosmetic Vertex Dodaj dopolnilno oglišče @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TehRisanje - + Insert Cosmetic Vertex Vstavi dopolnilno oglišče - + Add Cosmetic Vertex Dodaj dopolnilno oglišče @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TehRisanje - + Change Appearance of Lines Spremeni videz črt @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TehRisanje - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TehRisanje - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TehRisanje - + Insert Horizontal Dimension Vstavi vodoravno koto @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TehRisanje - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TehRisanje - + Insert Landmark Dimension - EXPERIMENTAL Vstavi koto mejnika - PREIZKUSNO @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TehRisanje - + Add Leaderline to View Dodaj pogledu opisnično črto @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TehRisanje - + Link Dimension to 3D Geometry Poveži koto s trirazsežno geometrijo @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TehRisanje - + Add Midpoint Vertices Dodaj razpolovišča @@ -577,23 +590,23 @@ Insert Projection Group - Insert Projection Group + Vstavi Skupino preslikav Insert multiple linked views of drawable object(s) - Insert multiple linked views of drawable object(s) + Vstavite več povezanih pogledov risanega(-ih) predmeta(-ov) CmdTechDrawQuadrants - + TechDraw TehRisanje - + Add Quadrant Vertices Dodaj četrtinska oglišča @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TehRisanje - + Insert Rich Text Annotation Vstavi pripis z obogatenim besedilom @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TehRisanje - + Show/Hide Invisible Edges Prikaži/skrij nevidne robove @@ -678,7 +691,7 @@ Insert View to a spreadsheet - Insert View to a spreadsheet + Vstavi Pogled v preglednico @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TehRisanje - + Insert Vertical Dimension Vstavi navpično koto @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TehRisanje - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TehRisanje - + Add Welding Information to Leaderline Dodaj opisnici podatek o varjenju @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Napačna izbira @@ -1126,7 +1139,7 @@ Page contains DrawViewArch which will not be exported. Continue? - Page contains DrawViewArch which will not be exported. Continue? + Stran vsebuje DrawViewArch, ki se ne bo izvozil. Želite nadaljevati? @@ -1144,26 +1157,20 @@ Odpri Drawing Pogled preden poskušaš izvoziti v datoteko SVG. - - - - - - - - + + + + + + + Incorrect Selection Nepravilna Izbira - - - Can not make a Dimension from this selection - Ni mogoče narediti Mere iz te izbire - @@ -1201,38 +1208,38 @@ Izbrani rob je B-zlepek. Premer bo približen. Nadaljevanje? - + Need two straight edges to make an Angle Dimension Za mero kota potrebuješ dva ravna robova - + Need three points to make a 3 point Angle Dimension Za 3 točkovno mero kota potrebuješ 3 točke - + There is no 3D object in your selection V tvoji izbiri ni 3D objekta - + There are no 3D Edges or Vertices in your selection V tvoji izbiri ni 3D Robov ali Ogljišč - - + + Please select a View [and Edges]. Izberite pogled [in robove]. - + Select 2 point objects and 1 View. (1) Izberite dva točkovna predmeta in en pogled. (1) - + Select 2 point objects and 1 View. (2) Izberite dva točkovna predmeta in en pogled. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Izberite najprej predmet - + Too many objects selected Izbranih je preveč predmetov - + Create a page first. Najprej ustvarite stran. - + No View of a Part in selection. V izboru ni pogleda na del. - + No Feature with Shape in selection. V izboru ni značilnosti oblike. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Opravilo je v teku - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Zapri dejavno pogovorno okno z opravili in poskusi ponovno. - - - - + + + + Selection Error Napaka izbora - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Napačen izbor - + Can not attach leader. No base View selected. Opisnice ni mogoče pripeti. Nobega pogleda podloge ni izbranega. - - - + + + + You must select a base View for the line. Za črto morate izbrati pogled predloge. - - + + No DrawViewPart objects in this selection Nobenega očrtovalnega pogleda ni v izboru - - - - + + + + No base View in Selection. Nobenega pogleda podloge ni v izboru. - + You must select Faces or an existing CenterLine. Izbrati morate ploskve ali obstoječo središčnico. - + No CenterLine in selection. V izboru ni nobene središčnice. - - - + + + Selection is not a CenterLine. Izbrano ni središčnica. - + Selection not understood. Izbor ni razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Izbrati morate 2 oglišči ali obstoječo središčnico. - + Need 2 Vertices or 1 CenterLine. Potrebni sta dve oglišči ali ena središčnica. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. V izboru ni nobenega pogleda. - + You must select a View and/or lines. Izbrati morate pogled in/ali daljice. - + No Part Views in this selection V tem izboru ni pogledov na dele - + Select exactly one Leader line or one Weld symbol. Izberite natanko eno opisnično črto ali eno oznako za zvar. - - + + Nothing selected Nič ni izbrano - + At least 1 object in selection is not a part view Vsaj en predmet v izboru ni pogled - + Unknown object type in selection V izboru je nepoznana vrsta predmeta @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Ali ste prepričani da želite nadaljevati? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Uredi znak za varjenje + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1683,7 +1728,7 @@ oznako za varjenje, ki bi postala okvarjena. You cannot delete the anchor view of a projection group. - You cannot delete the anchor view of a projection group. + Sidrnega pogleda skupine preslikav ne morete izbrisati. @@ -1707,34 +1752,34 @@ oznako za varjenje, ki bi postala okvarjena. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Ta stran ni prazna, zaradi česa lahko izgubite +naslednje sklicne predmete: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Skupine ni mogoče izbrisati, saj imajo njeni predmeti sledeče +prereze, podrobne poglede ali opisnice, ki bi se skvarili: The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Skupina preslikav ni prazna, zaradi česar lahko +izgubite naslednje sklicne predmete: The following referencing object might break: - The following referencing object might break: + Naslednji sklicni predmeti se lahko skvarijo: You cannot delete this weld symbol because it has a tile weld that would become broken. - You cannot delete this weld symbol because -it has a tile weld that would become broken. + Te oznake zvara ni mogoče izbrisati, ker +vsebuje zvarni znaki, ki bi postal okvarjen. @@ -1752,7 +1797,7 @@ it has a tile weld that would become broken. Width of generated view - Width of generated view + Širina ustvarjenega pogleda @@ -1762,24 +1807,24 @@ it has a tile weld that would become broken. Height of generated view - Height of generated view + Višina ustvarjenega pogleda Border - Border + Meja Minimal distance of the object from the top and left view border - Minimal distance of the object from -the top and left view border + Najmanjša razdalja predmeta od +zgornje in leve meje pogleda Paint background yes/no - Paint background yes/no + Pobarvaj ozadje da/ne @@ -1794,22 +1839,22 @@ the top and left view border Line Width - Line Width + Debelina črte Width of lines in generated view - Width of lines in generated view + Debelina črt v ustvarjenem pogledu Render Mode - Render Mode + Upodabljalni način Drawing style - see SoRenderManager - Drawing style - see SoRenderManager + Slog risanja - poglejte SoRender upravljalnik @@ -1829,17 +1874,17 @@ the top and left view border Wireframe overlay - Wireframe overlay + Prekrij z žičnim prikazom Hidden Line - Hidden Line + Skrita črta Bounding box - Bounding box + Mejni kvader @@ -1847,68 +1892,68 @@ the top and left view border Welding Symbol - Welding Symbol + Znak za varjenje Text before arrow side symbol - Text before arrow side symbol + Besedilo pred znakom na kazalnični strani Text after arrow side symbol - Text after arrow side symbol + Besedilo za znakom na kazalnični strani Pick arrow side symbol - Pick arrow side symbol + Izberite znak na kazalnični strani Symbol - Symbol + Znak Text above arrow side symbol - Text above arrow side symbol + Besedilo nad znakom na kazalnični strani Pick other side symbol - Pick other side symbol + Izberite znak na nekazalnični strani Text below other side symbol - Text below other side symbol + Besedilo pod znakom na nekazalnični strani Text after other side symbol - Text after other side symbol + Besedilo za znakom na nekazalnični strani Flips the sides - Flips the sides + Preobrne strani Flip Sides - Flip Sides + Preobrni strani Text before other side symbol - Text before other side symbol + Besedilo pred znakom na nekazalnični strani Remove other side symbol - Remove other side symbol + Odstrante znak na nekazalnični strani @@ -1919,62 +1964,62 @@ the top and left view border Adds the 'Field Weld' symbol (flag) at the kink in the leader line - Adds the 'Field Weld' symbol (flag) -at the kink in the leader line + Doda znak za 'zvar pri vgradnji' (zastavica) +na prelomu opisnice Field Weld - Field Weld + Zvar pri vgradnji Adds the 'All Around' symbol (circle) at the kink in the leader line - Adds the 'All Around' symbol (circle) -at the kink in the leader line + Doda znak za 'obodni zvar' (krogec) +na prelomu opisnice All Around - All Around + Obodni zvar Offsets the lower symbol to indicate alternating welds - Offsets the lower symbol to indicate alternating welds + Odmakne spodnji znak, da nakaže izmenjajoče zvare Alternating - Alternating + Izmenjujoče Directory to welding symbols. This directory will be used for the symbol selection. - Directory to welding symbols. -This directory will be used for the symbol selection. + Mapa z oznakami varjenja. +V tej mapi se bo znake izbiralo. *.svg - *.svg + *.svg Text at end of symbol - Text at end of symbol + Besedilo na koncu znaka Symbol Directory - Symbol Directory + Mapa z znaki Tail Text - Tail Text + Besedilo v vilicah @@ -1983,19 +2028,19 @@ This directory will be used for the symbol selection. Advanced - Advanced + Napredno Shape of line end caps. Only change unless you know what you are doing! - Shape of line end caps. -Only change unless you know what you are doing! + Oblika zaključkov črt. +Spreminjajte le, če veste, kaj počnete! Round - Round + Zaokroženo @@ -2012,122 +2057,122 @@ Only change unless you know what you are doing! Limit of 64x64 pixel SVG tiles used to hatch a single face. For large scalings you might get an error about to many SVG tiles. Then you need to increase the tile limit. - Limit of 64x64 pixel SVG tiles used to hatch a single face. -For large scalings you might get an error about to many SVG tiles. -Then you need to increase the tile limit. + Omejitev števila SVG opločnic s 64x64 slikovnimi pikami pri črtkanju ene ploskve. +Pri velikih merilih se lahko pojavi napaka zaredi preveč SVG opločnic. +V tem primeru je treba dvigniti omejitev opločnic. Dump intermediate results during Detail view processing - Dump intermediate results during Detail view processing + Med obdelovanjem podrobnega pogleda odloži vmesne rezultate Debug Detail - Debug Detail + Razdroščenje detajla Include 2D Objects in projection - Include 2D Objects in projection + Vključi v preslikavo dvorazsežne predmete Show Loose 2D Geom - Show Loose 2D Geom + Prikaži prosto 2D geometrijo Dump intermediate results during Section view processing - Dump intermediate results during Section view processing + Med obdelovanjem prereznega pogleda odloži vmesne rezultate Debug Section - Debug Section + Razhroščenje prereza Perform a fuse operation on input shape(s) before Section view processing - Perform a fuse operation on input shape(s) before Section view processing + Pred obdelavo prereznega pogleda združi vhodne oblike Fuse Before Section - Fuse Before Section + Združi pred rezanjem Highlights border of section cut in section views - Highlights border of section cut in section views + Poudari rob prereza v prereznem pogledu Show Section Edges - Show Section Edges + Prikaži robove prereza - + Maximum hatch line segments to use when hatching a face with a PAT pattern - Maximum hatch line segments to use -when hatching a face with a PAT pattern + Največ črtnih odsekov črtkanja, ki se uporabi +pri črtkanju ploskve z vzorcem PAT - + Line End Cap Shape - Line End Cap Shape + Oblika zaključkov črt - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - If checked, TechDraw will attempt to build faces using the -line segments returned by the hidden line removal algorithm. -Faces must be detected in order to use hatching, but there -can be a performance penalty in complex models. + Če je označeno, bo skušal TechDraw tvoriti ploskve s pomočjo +črtnih odsekov, ki jih bo dal algoritem za odstranjevanje skritih črt. +Za črtkanje morajo biti ploskve zaznane, kar pa lahko v +obsežnih modelih terja svoj davek pri delovanju. - + Detect Faces - Detect Faces - - - - Include edges with unexpected geometry (zero length etc.) in results - Include edges with unexpected geometry (zero length etc.) in results + Zaznaj ploskve + Include edges with unexpected geometry (zero length etc.) in results + Zajemi v rezultate robove z nepričakovano geometrijo (ničta dolžina itn.) + + + Allow Crazy Edges - Allow Crazy Edges + Dovoli nenavadne robove - + Max SVG Hatch Tiles - Max SVG Hatch Tiles + Največ SVG opločnic črtkanja - + Max PAT Hatch Segments - Max PAT Hatch Segments + Največ PAT odsekov črtkanja - + Dimension Format - Dimension Format + Oblika kote - + Override automatic dimension format - Override automatic dimension format + Ročno nastavi obliko kote - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -2141,19 +2186,19 @@ can be a performance penalty in complex models. Center Line Style - Center Line Style + Slog središčnice Style for section lines - Style for section lines + Slog črt prereza NeverShow - NeverShow + Nikoli ne prikaži @@ -2193,17 +2238,17 @@ can be a performance penalty in complex models. Section Line Standard - Section Line Standard + Pravilo za črte prereza Section Cut Surface - Section Cut Surface + Prerezano površje Default appearance of cut surface in section view - Default appearance of cut surface in section view + Privzeti videz prerezanega površja v prereznem pogledu @@ -2213,42 +2258,42 @@ can be a performance penalty in complex models. Solid Color - Solid Color + Enotna barva SVG Hatch - SVG Hatch + SVG črtkanje PAT Hatch - PAT Hatch + PAT črtkanje Forces last leader line segment to be horizontal - Forces last leader line segment to be horizontal + Prisili zadnji odsek opisnice, da je vodoraven Leader Line Auto Horizontal - Leader Line Auto Horizontal + Samodjena vodoravnost opisnice Length of balloon leader line kink - Length of balloon leader line kink + Dolžina preloma opisnice z oblačkom Type for centerlines - Type for centerlines + Vrste središčnic Shape of balloon annotations - Shape of balloon annotations + Oblika opisnic z oblačkom @@ -2289,27 +2334,27 @@ can be a performance penalty in complex models. Balloon Leader End - Balloon Leader End + Konica opisnice z oblačkom Standard to be used to draw section lines - Standard to be used to draw section lines + Dogovor, ki se uporablja za risanje črt v prerezu ANSI - ANSI + ANSI ISO - ISO + ISO Outline shape for detail views - Outline shape for detail views + Obris pri podrobnih pogledih @@ -2319,87 +2364,87 @@ can be a performance penalty in complex models. Section Line Style - Section Line Style + Slog prerezne črte Show arc center marks in views - Show arc center marks in views + Prikaži v pogledih oznake ločnih središč Show Center Marks - Show Center Marks + Prikaži središčne oznake Default name in LineGroup CSV file - Default name in LineGroup CSV file + Privzeto ime v CSV datoteki LineGroup Detail View Outline Shape - Detail View Outline Shape + Oblika obrisa podrobnega pogleda Style for balloon leader line ends - Style for balloon leader line ends + Slog zaključkov črt pri opisnici z oblačkom Length of horizontal portion of Balloon leader - Length of horizontal portion of Balloon leader + Dolžina vodoravnega dela opisnice z oblačkom Ballon Leader Kink Length - Ballon Leader Kink Length + Dolžina opisnice z oblačkom do preloma Restrict Filled Triangle line end to vertical or horizontal directions - Restrict Filled Triangle line end to vertical or horizontal directions + Omeji zaključke črt s polnim trikotnikom le na navpično in vodoravno smer Balloon Orthogonal Triangle - Balloon Orthogonal Triangle + Trikotnik opisnice pravokotno Line Group Name - Line Group Name + Ime skupine črt Balloon Shape - Balloon Shape + Oblika oblačka Show arc centers in printed output - Show arc centers in printed output + Pri izrisu in tiskanju prikaži središča lokov Print Center Marks - Print Center Marks + Natisni središčne oznake Line style of detail highlight on base view - Line style of detail highlight on base view + Slog črte označitve detajla na osnovnem pogledu Detail Highlight Style - Detail Highlight Style + Slog označitve detajla <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -2418,37 +2463,37 @@ can be a performance penalty in complex models. Normal line color - Normal line color + Barva normale Hidden Line - Hidden Line + Skrita črta Hidden line color - Hidden line color + Barva skrite črte Preselected - Preselected + Predizbor Preselection color - Preselection color + Barva predizbora Section Face - Section Face + Ploskev prereza Section face color - Section face color + Barva prerezane ploskve @@ -2458,17 +2503,17 @@ can be a performance penalty in complex models. Selected item color - Selected item color + Barva izbranega Section Line - Section Line + Prerezna črta Section line color - Section line color + Barva črt prereza @@ -2478,12 +2523,12 @@ can be a performance penalty in complex models. Background color around pages - Background color around pages + Barva ozadja okoli strani Hatch - Hatch + Črtkanje @@ -2498,27 +2543,27 @@ can be a performance penalty in complex models. Color of dimension lines and text. - Color of dimension lines and text. + Barva kotirnih črt in besedil. Geometric Hatch - Geometric Hatch + Geometrijsko črtkanje Geometric hatch pattern color - Geometric hatch pattern color + Barva črtkanja z geometrijskim vzorcem Centerline - Centerline + Središčnica Centerline color - Centerline color + Barva središčnice @@ -2528,42 +2573,42 @@ can be a performance penalty in complex models. Color of vertices in views - Color of vertices in views + Barva oglišč v pogledih Object faces will be transparent - Object faces will be transparent + Ploskve predmeta bodo prozorne Transparent Faces - Transparent Faces + Prozorne ploskve Face color (if not transparent) - Face color (if not transparent) + Barva ploskve (če ni prozorna) Detail Highlight - Detail Highlight + Označitev detajla Leaderline - Leaderline + Opisnica Default color for leader lines - Default color for leader lines + Privzeta barva opisnic <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -2577,17 +2622,17 @@ can be a performance penalty in complex models. Standard and Style - Standard and Style + Standard in Slog Standard to be used for dimensional values - Standard to be used for dimensional values + Standard kotirnih vrednosti ISO Oriented - ISO Oriented + ISO usmerjeno @@ -2687,7 +2732,7 @@ can be a performance penalty in complex models. Projection Group Angle - Projection Group Angle + Kot skupine preslikav @@ -2732,7 +2777,7 @@ can be a performance penalty in complex models. <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -2785,8 +2830,8 @@ This can slow down the response time. Automatically distribute secondary views for ProjectionGroups - Automatically distribute secondary views -for ProjectionGroups + Samodejno postavi drugotne poglede +v skupini preslikav @@ -2846,7 +2891,7 @@ for ProjectionGroups Hatch Pattern File - Hatch Pattern File + Datoteka vzorca črtkanja @@ -2881,7 +2926,7 @@ for ProjectionGroups Default PAT pattern definition file for geometric hatching - Default PAT pattern definition file for geometric hatching + Privzeta opredelbena datoteka vzorca PAT za geometrijsko črtkanje @@ -2901,7 +2946,7 @@ for ProjectionGroups <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -2919,13 +2964,13 @@ for ProjectionGroups Show seam lines - Show seam lines + Prikaži črte šivov Show Seam Lines - Show Seam Lines + Prikaži črte šivov @@ -2980,7 +3025,7 @@ Fast, but result is a collection of short straight lines. Show hidden seam lines - Show hidden seam lines + Prikaži skrite šive @@ -3015,7 +3060,7 @@ Fast, but result is a collection of short straight lines. <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -3158,7 +3203,7 @@ Each unit is approx. 0.1 mm wide <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Opombe:</span> Reči v <span style=" font-style:italic;">ležečem</span> so prevzete vrednosti novih predmetov in ne vplivajo na obstoječe predmete.</p></body></html> @@ -3308,7 +3353,7 @@ Ali želite nadaljevati? Shape of the balloon bubble - Shape of the balloon bubble + Oblika balončka @@ -3383,7 +3428,7 @@ Ali želite nadaljevati? Length of balloon leader line kink - Length of balloon leader line kink + Dolžina preloma opisnice z oblačkom @@ -3498,8 +3543,8 @@ Ali želite nadaljevati? Flips endpoints of selected lines for centerline creation, see the FreeCAD Wiki '2LineCenterLine' for a description - Flips endpoints of selected lines for centerline creation, -see the FreeCAD Wiki '2LineCenterLine' for a description + Zamenja krajišča izbranih daljic z novoustvarjeno središčnico, +za opis poglejte FreeCAD Wiki '2LineCenterLine' @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Tekom urejanja je prišlo do prekinitve. Začni znova. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Pogled + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3615,12 +3703,12 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Click to drag detail highlight to new position - Click to drag detail highlight to new position + Kliknite, da povlečete oznako detajlna na novo mesto Drag Highlight - Drag Highlight + Povleci označbo @@ -3681,7 +3769,7 @@ Custom: custom scale factor is used x position of detail highlight within view - x position of detail highlight within view + x položaja označitve detajla znotraj pogleda @@ -3691,7 +3779,7 @@ Custom: custom scale factor is used y position of detail highlight within view - y position of detail highlight within view + y položaja označitve detajla znotraj pogleda @@ -3722,7 +3810,7 @@ Custom: custom scale factor is used Define your pattern - Definiraj svoj vzorec + Določite svoj vzorec @@ -3747,7 +3835,7 @@ Custom: custom scale factor is used Pattern Scale - Skaliranje Vzorca + Merilo Vzorca @@ -3767,7 +3855,7 @@ Custom: custom scale factor is used Enlarges/shrinks the pattern - Razširi/skrči vzorec + Povečanje/zmanjšanje vzorca @@ -3785,7 +3873,7 @@ Custom: custom scale factor is used Define your pattern - Definiraj svoj vzorec + Določite svoj vzorec @@ -3810,12 +3898,12 @@ Custom: custom scale factor is used Enlarges/shrinks the pattern - Razširi/skrči vzorec + Povečanje/zmanjšanje vzorca Pattern Scale - Skaliranje Vzorca + Merilo Vzorca @@ -4006,7 +4094,7 @@ You can pick further points to get line segments. Thickness of pattern lines. - Thickness of pattern lines. + Debelina črt vzorca. @@ -4077,7 +4165,7 @@ You can pick further points to get line segments. Projection Group - Skupina projekcije + Skupina preslikav @@ -4178,7 +4266,7 @@ You can pick further points to get line segments. Secondary Projections - Sekundarne Projekcije + Drugotne preslikave @@ -4244,8 +4332,8 @@ You can pick further points to get line segments. Distributes projections automatically using the given X/Y Spacing - Distributes projections automatically -using the given X/Y Spacing + Samodejno razvrsti preslikave +s pomočjo podanih X/Y odmikov @@ -4255,7 +4343,7 @@ using the given X/Y Spacing Horizontal space between border of projections - Horizontal space between border of projections + Vodoravni odmik med mejami preslikav @@ -4514,7 +4602,7 @@ using the given X/Y Spacing Symbol - Symbol + Znak @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,15 +4661,15 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View - Inserts a Cosmetic Vertex into a View + Vstavi v pogled dopolnilno oglišče TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,23 +4685,23 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges - Inserts Cosmetic Vertices at Midpoint of selected Edges + Vstavi dopolnilna oglišča na sredino izbranih robov TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles - Inserts Cosmetic Vertices at Quadrant Points of selected Circles + Vstavi dopolnilna oglišča na četrtinke izbranih krožnic TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm index fd49f3afff..cfc325c2a7 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index b74a92ce31..dbbdb01ab7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Погрешан избор @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Прво изаберите објекат - + Too many objects selected Превише објеката је изабрано - + Create a page first. Прво направите cтраницу. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Ништа није изабрано - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Sigurno želite da nastavite? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,27 +1752,24 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Stranica nije prazna, stoga sledeći referencirani objekti biće obrisani. The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - The group cannot be deleted because its items have the following -section or detail views, or leader lines that would get broken: + Grupa se ne može obrisati zato što stavke imaju sekcioni lil detaljni prikaz, ili vodeće linije su se prekinule. The projection group is not empty, therefore the following referencing objects might be lost: - The projection group is not empty, therefore -the following referencing objects might be lost: + Grupa projekcije nije prazna, stoga sledeći referencirani objekti biće obrisani. The following referencing object might break: - The following referencing object might break: + Određeni referentni objekat je prekinut: @@ -2067,19 +2109,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2132,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3637,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Приказ + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4642,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4650,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4658,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4666,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4674,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4682,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4690,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4698,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm index 9b66abcd63..9fdbda5ef3 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 46fe19b54a..7da970372c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Infoga annotering @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Fel val @@ -1144,26 +1157,20 @@ Öppna ritningsvy innan försök att exportera till SVG. - - - - - - - - + + + + + + + Incorrect Selection Felaktig markering - - - Can not make a Dimension from this selection - Kan inte skapa en måttsättning från aktuell markering - @@ -1201,38 +1208,38 @@ Markerad kant är en B-spline, diameter kommer vara uppskattad. Fortsätt? - + Need two straight edges to make an Angle Dimension Två raka kanter behövs för att skapa en vinkelmåttsättning - + Need three points to make a 3 point Angle Dimension Behöver tre punkter för att skapa en trepunktsvinkelmåttsättning - + There is no 3D object in your selection Det finns inget 3D-objekt i aktuell markering - + There are no 3D Edges or Vertices in your selection Det finns inga 3D-kanter eller hörnpunkter i aktuell markering - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Markera ett objekt först - + Too many objects selected För många objekt markerade - + Create a page first. Skapa en sida först. - + No View of a Part in selection. Ingen delvy i markeringen. - + No Feature with Shape in selection. Ingen funktion med form i markeringen. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Uppgift pågår - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Stäng aktiv uppgiftsdialog och försök igen. - - - - + + + + Selection Error Markeringsfel - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Kan inte bifoga hänvisning. Ingen basvy markerad. - - - + + + + You must select a base View for the line. Du måste markera en basvy för linjen. - - + + No DrawViewPart objects in this selection Inga DrawViewPart-objekt i aktuell markering - - - - + + + + No base View in Selection. Ingen basvy i markering. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Inget markerat - + At least 1 object in selection is not a part view Ett eller flera objekt i markeringen är inte en delvy - + Unknown object type in selection Okänd objekttyp i markering @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Pågående redigering avbruten. Börja om. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Vy + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,7 +4676,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4596,7 +4684,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,7 +4700,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm index 2b078976f5..fb5783fa1d 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index e73d83e25f..75e7d2d1ce 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -4,72 +4,85 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + 2 çizgi arasına Merkez çizgisi ekler Cmd2PointCenterLine - + Add Centerline between 2 Points - Add Centerline between 2 Points + 2 nokta arasına Merkez çizgisi ekler CmdMidpoints - + Add Midpoint Vertices - Add Midpoint Vertices + Orta nokta köşeleri ekle CmdQuadrants - + Add Quadrant Vertices - Add Quadrant Vertices + Çeyrek daire köşeleri ekle CmdTechDraw2LineCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Lines - Add Centerline between 2 Lines + 2 çizgi arasına Merkez çizgisi ekler CmdTechDraw2PointCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Points - Add Centerline between 2 Points + 2 nokta arasına Merkez çizgisi ekler + + + + CmdTechDraw2PointCosmeticLine + + + TechDraw + TeknikÇizim + + + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points CmdTechDraw3PtAngleDimension - + TechDraw TeknikÇizim - + Insert 3-Point Angle Dimension - Insert 3-Point Angle Dimension + Yeni bir 3 noktalı Açı ölçüsü ekle @@ -82,31 +95,31 @@ Insert Active View (3D View) - Insert Active View (3D View) + Etkin görünüm ekle (3B görünüm) CmdTechDrawAngleDimension - + TechDraw TeknikÇizim - + Insert Angle Dimension - Insert Angle Dimension + Yeni bir Açı ölçüsü ekle CmdTechDrawAnnotation - + TechDraw TeknikÇizim - + Insert Annotation Açıklama girin @@ -121,12 +134,12 @@ Insert Arch Workbench Object - Insert Arch Workbench Object + Mimari tezgah(Arch Workbench) objesi ekle Insert a View of a Section Plane from Arch Workbench - Insert a View of a Section Plane from Arch Workbench + Mimari Çalışma Tezgahından (Arch Workbench) Kesit Düzleminin bir görünümünü ekler @@ -139,25 +152,25 @@ Insert Balloon Annotation - Insert Balloon Annotation + Balon Açıklama Ekle CmdTechDrawCenterLineGroup - + TechDraw TeknikÇizim - + Insert Center Line - Insert Center Line + Yeni Eksen - + Add Centerline to Faces - Add Centerline to Faces + Yüzey(ler) e bir eksen ekle @@ -170,7 +183,7 @@ Insert Clip Group - Insert Clip Group + Kesim grubu ekleyin @@ -183,7 +196,7 @@ Add View to Clip Group - Add View to Clip Group + Görüntüyü Kesim Grubu'na ekle @@ -196,64 +209,64 @@ Remove View from Clip Group - Remove View from Clip Group + KesimGrubu'ndan görüntü çıkarın CmdTechDrawCosmeticEraser - + TechDraw TeknikÇizim - + Remove Cosmetic Object - Remove Cosmetic Object + Kozmetik nesneyi kaldır CmdTechDrawCosmeticVertex - + TechDraw TeknikÇizim - + Add Cosmetic Vertex - Add Cosmetic Vertex + Yeni Yüzeysel Köşe CmdTechDrawCosmeticVertexGroup - + TechDraw TeknikÇizim - + Insert Cosmetic Vertex - Insert Cosmetic Vertex + Yüzeysel köşe ekle - + Add Cosmetic Vertex - Add Cosmetic Vertex + Yeni Yüzeysel Köşe CmdTechDrawDecorateLine - + TechDraw TeknikÇizim - + Change Appearance of Lines - Change Appearance of Lines + Çizgilerin görünümünü değiştir @@ -266,7 +279,7 @@ Insert Detail View - Insert Detail View + Detaylı Görünümü Ekle @@ -279,7 +292,7 @@ Insert Diameter Dimension - Insert Diameter Dimension + Çap ölçüsü ekle @@ -292,7 +305,7 @@ Insert Dimension - Insert Dimension + Boyut ekle @@ -305,7 +318,7 @@ Insert Draft Workbench Object - Insert Draft Workbench Object + Mimari tezgah(Arch Workbench) objesi ekle @@ -323,7 +336,7 @@ Export Page as DXF - Export Page as DXF + Sayfayı DXF olarak dışa aktar @@ -346,43 +359,43 @@ Export Page as SVG - Export Page as SVG + Sayfa SVG olarak dışa aktar CmdTechDrawExtentGroup - + TechDraw TeknikÇizim - + Insert Extent Dimension - Insert Extent Dimension + Kapsam Ölçüsü Ekle - + Horizontal Extent - Horizontal Extent + Yatay kapsam - + Vertical Extent - Vertical Extent + Dikey genişlik CmdTechDrawFaceCenterLine - + TechDraw TeknikÇizim - + Add Centerline to Faces - Add Centerline to Faces + Yüzey(ler) e bir eksen ekle @@ -408,33 +421,33 @@ Hatch a Face using Image File - Hatch a Face using Image File + Görüntü Dosyasını Kullanarak Bir Yüzü Taratın CmdTechDrawHorizontalDimension - + TechDraw TeknikÇizim - + Insert Horizontal Dimension - Insert Horizontal Dimension + Yatay ölçü ekle CmdTechDrawHorizontalExtentDimension - + TechDraw TeknikÇizim - + Insert Horizontal Extent Dimension - Insert Horizontal Extent Dimension + Yatay kapsam ölçüsü Ekle @@ -447,13 +460,13 @@ Insert Bitmap Image - Insert Bitmap Image + Bitmap resmi ekle Insert Bitmap from a file into a page - Insert Bitmap from a file into a page + Bir dosyadan bir sayfaya bir bitmap ekler @@ -469,25 +482,25 @@ CmdTechDrawLandmarkDimension - + TechDraw TeknikÇizim - + Insert Landmark Dimension - EXPERIMENTAL - Insert Landmark Dimension - EXPERIMENTAL + İşaret ölçüsü ekle - DENEYSEL CmdTechDrawLeaderLine - + TechDraw TeknikÇizim - + Add Leaderline to View Add Leaderline to View @@ -502,33 +515,33 @@ Insert Length Dimension - Insert Length Dimension + Yeni bir uzunluk ölçüsü ekle CmdTechDrawLinkDimension - + TechDraw TeknikÇizim - + Link Dimension to 3D Geometry - Link Dimension to 3D Geometry + 3D geometriye bir ebat ekle CmdTechDrawMidpoints - + TechDraw TeknikÇizim - + Add Midpoint Vertices - Add Midpoint Vertices + Orta nokta köşeleri ekle @@ -541,7 +554,7 @@ Insert Default Page - Insert Default Page + Yeni varsayılan sayfa ekle @@ -554,17 +567,17 @@ Insert Page using Template - Insert Page using Template + Şablondan yeni bir sayfa ekle Select a Template File - Select a Template File + Şablon dosyası seçin Template (*.svg *.dxf) - Template (*.svg *.dxf) + Şablon (*.svg *.dxf) @@ -577,25 +590,25 @@ Insert Projection Group - Insert Projection Group + Projeksiyon grubu ekle Insert multiple linked views of drawable object(s) - Insert multiple linked views of drawable object(s) + Çizilebilir nesne(ler) in çok bağlantılı görünümlerini ekle CmdTechDrawQuadrants - + TechDraw TeknikÇizim - + Add Quadrant Vertices - Add Quadrant Vertices + Çeyrek daire köşeleri ekle @@ -608,7 +621,7 @@ Insert Radius Dimension - Insert Radius Dimension + Yarıçap ölçüsü ekle @@ -621,20 +634,20 @@ Redraw Page - Redraw Page + Sayfayı yeniden çiz CmdTechDrawRichTextAnnotation - + TechDraw TeknikÇizim - + Insert Rich Text Annotation - Insert Rich Text Annotation + Zengin metin dipnotu ekle @@ -647,20 +660,20 @@ Insert Section View - Insert Section View + Kesit Görünümü Ekle CmdTechDrawShowAll - + TechDraw TeknikÇizim - + Show/Hide Invisible Edges - Show/Hide Invisible Edges + Görünmez kenarları Gizle/Göster @@ -673,12 +686,12 @@ Insert Spreadsheet View - Insert Spreadsheet View + Hesap tablosu görünümü ekle Insert View to a spreadsheet - Insert View to a spreadsheet + Hesap tablosuna görünüm ekle @@ -696,7 +709,7 @@ Insert symbol from an SVG file - Insert symbol from an SVG file + Bir svg dosyasından simge ekle @@ -716,27 +729,27 @@ CmdTechDrawVerticalDimension - + TechDraw TeknikÇizim - + Insert Vertical Dimension - Insert Vertical Dimension + Dikey ölçü ekle CmdTechDrawVerticalExtentDimension - + TechDraw TeknikÇizim - + Insert Vertical Extent Dimension - Insert Vertical Extent Dimension + Dikey kapsam Ölçüsü Ekle @@ -749,23 +762,23 @@ Insert View - Insert View + Görünüm ekle Insert a View - Insert a View + Bir görünüm ekle CmdTechDrawWeldSymbol - + TechDraw TeknikÇizim - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Yanlış seçim @@ -1045,7 +1058,7 @@ No Shapes, Groups or Links in this selection - No Shapes, Groups or Links in this selection + Seçim içinde şekil(ler) ya da Bağlantılar(lar) yok @@ -1106,27 +1119,27 @@ There were no DraftWB objects in the selection. - There were no DraftWB objects in the selection. + Seçimde DraftWB nesnesi yoktu. Please select only 1 Arch Section. - Please select only 1 Arch Section. + Lütfen sadece bir Mimari(Arch) bölümü seçin. No Arch Sections in selection. - No Arch Sections in selection. + Seçimde Mimari(Arch) Bölümü yok. Can not export selection - Can not export selection + Seçim dışa aktarılamıyor Page contains DrawViewArch which will not be exported. Continue? - Page contains DrawViewArch which will not be exported. Continue? + Sayfa dışa aktarılamayan DrawViewArch içeririyor. Devam edilsin mi? @@ -1144,26 +1157,20 @@ Çizim Önizlemeyi açmadan SVG dosyasını dışarı aktarmayın. - - - - - - - - + + + + + + + Incorrect Selection Hatalı seçim - - - Can not make a Dimension from this selection - Bu seçimden bir ölçülendirme oluşturulamıyor - @@ -1201,51 +1208,51 @@ Seçili kenar bir BSpline'dır. Çap yaklaşık olacaktır. Devam? - + Need two straight edges to make an Angle Dimension Açı Ölçümü yapmak için iki düz kenar gerekir - + Need three points to make a 3 point Angle Dimension 3 noktalı bir Açı Ölçüsü oluşturmak için üç noktaya ihtiyacınız var - + There is no 3D object in your selection Seçiminizde 3D nesne yok - + There are no 3D Edges or Vertices in your selection Seçiminizde hiçbir 3D Kenarlar veya köşe noktası yoktur - - + + Please select a View [and Edges]. - Please select a View [and Edges]. + Lütfen bir görünüm[ve kenar] seçin. - + Select 2 point objects and 1 View. (1) - Select 2 point objects and 1 View. (1) + 2 nokta nesnesi ve 1 görünüm seçin(1) - + Select 2 point objects and 1 View. (2) - Select 2 point objects and 1 View. (2) + 2 nokta nesnesi ve 1 görünüm seçin(2) - - - - - + + + + + @@ -1254,203 +1261,231 @@ - + Select an object first Önce bir nesne seçin - + Too many objects selected Çok fazla nesne seçili - + Create a page first. Önce bir sayfa oluşturun. - + No View of a Part in selection. Seçimdeki Parçanın Görünümü Yok. - + No Feature with Shape in selection. Seçimdeki şeklin özelliği yok. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Devam eden görevler - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Etkin görev iletişim kutusunu kapatın ve yeniden deneyin. - - - - + + + + Selection Error Seçim hatası - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection - Wrong Selection + Yanlış seçim - + Can not attach leader. No base View selected. Kılavuz eklenemiyor. Hiç bir temel görünüm seçilmedi. - - - + + + + You must select a base View for the line. Çizgi için bir temel görünüm seçmelisiniz. - - + + No DrawViewPart objects in this selection Bu seçimde GörünümParçasıÇiz nesneleri yok - - - - + + + + No base View in Selection. Seçimde temel görünüm yok. - - - You must select Faces or an existing CenterLine. - You must select Faces or an existing CenterLine. - + You must select Faces or an existing CenterLine. + Yüzey yada mevcut merkez doğrusu(CenterLine) seçiniz. + + + No CenterLine in selection. - No CenterLine in selection. - - - - - - Selection is not a CenterLine. - Selection is not a CenterLine. + Seçimde merkez doğrusu(CenterLine) yok. + + + Selection is not a CenterLine. + Seçim bir merkez doğrusu(CenterLine) değil. + + + Selection not understood. - Selection not understood. + Seçim anlaşılmadı. - + You must select 2 Vertexes or an existing CenterLine. - You must select 2 Vertexes or an existing CenterLine. + 2 nokta yada mevcut merkez doğrusu(CenterLine) seçiniz. - + Need 2 Vertices or 1 CenterLine. - Need 2 Vertices or 1 CenterLine. + 2 köse yada bir merkez doğrusu(CenterLine) ye ihtiyaç var. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. - No View in Selection. + Seçimde görünüm yok. - + You must select a View and/or lines. - You must select a View and/or lines. + Bir görünüm ve/veya çizgi seçmelisin. - + No Part Views in this selection - No Part Views in this selection + Bu seçimde Bölüm görünümü yok - + Select exactly one Leader line or one Weld symbol. - Select exactly one Leader line or one Weld symbol. + Tam olarak bir lider hattı(Leader line) yada bir kaynak(Weld) sembolü seçiniz. - - + + Nothing selected Seçili hiçbir şey yok - + At least 1 object in selection is not a part view Seçimdeki en az bir nesne bölüm görünümü değil - + Unknown object type in selection Seçimde bilinmeyen nesne tipi var Replace Hatch? - Replace Hatch? + Kapak değiştirilsin mi? @@ -1643,15 +1678,25 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View - New Detail View + Yeni Detaylı Görünüm Edit Detail View - Edit Detail View + Detaylı Görünümü düzenle @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Ölçülendirme Formatı - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3594,6 +3639,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Devam eden düzenleme terk edildi. Yeniden başla. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Görünüm + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4556,7 +4644,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4564,7 +4652,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4572,7 +4660,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4580,7 +4668,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4588,15 +4676,15 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension - Insert Horizontal Extent Dimension + Yatay kapsam ölçüsü Ekle TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4604,7 +4692,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4612,9 +4700,9 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension - Insert Vertical Extent Dimension + Dikey kapsam Ölçüsü Ekle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm index 76a528ec35..5122da5f9e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 24289fbcf4..ba485fc932 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Вставити нотатку @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Невірний вибір @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Некоректний вибір - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Ви не обрали 3D об'єкт - + There are no 3D Edges or Vertices in your selection Ви не обрали 3D кутів або вершин - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Оберіть об'єкт для початку - + Too many objects selected Обрано забагато об'єктів - + Create a page first. Спочатку створіть сторінку. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1549,7 +1584,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + Ви впевнені, що бажаєте продовжити? @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -1707,8 +1752,8 @@ it has a weld symbol that would become broken. The page is not empty, therefore the following referencing objects might be lost: - The page is not empty, therefore the -following referencing objects might be lost: + Сторінка не порожня, тому +такі посилання на об'єкти можуть бути втрачені: @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Вигляд + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm index 1227d18be1..43b1087836 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index d61e2b87fd..1786b5475c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afig una línia central entre 2 punts @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Afig vèrtex de punt central @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Afig vèrtexs de quadrant @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afig una línia central entre 2 punts - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insereix una cota angular de 3 punts @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insereix una cota angular @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix Anotació @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix una línia central - + Add Centerline to Faces Afig una línia central les cares @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Elimina un objecte cosmètic @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afig un vèrtex cosmètic @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insereix un vèrtex cosmètic - + Add Cosmetic Vertex Afig un vèrtex cosmètic @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insereix una cota d'extensió - + Horizontal Extent Extensió horitzontal - + Vertical Extent Extensió vertical @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afig una línia central les cares @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insereix una cota horitzontal @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insereix una cota d'extensió horitzontal @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insereix una cota de marca - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Afig un línia guia a la vista @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Enllaça una cota a una geometria 3D @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afig vèrtex de punt central @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afig vèrtexs de quadrant @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insereix una anotació de text enriquit @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insereix una cota vertical @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insereix una cota d'extensió vertical @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afig la informació de soldadura a la línia guia @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Selecció incorrecta @@ -1144,26 +1157,20 @@ Obri les vistes de dibuix abans d'intentar l'exportació a SVG. - - - - - - - - + + + + + + + Incorrect Selection Selecció incorrecta - - - Can not make a Dimension from this selection - No es pot crear una dimensió d'aquesta selecció - @@ -1201,38 +1208,38 @@ L'aresta seleccionada és una BSpline. El diàmetre serà aproximat. Voleu continuar? - + Need two straight edges to make an Angle Dimension Es necessiten dues arestes rectes per a crear una cota d'angle - + Need three points to make a 3 point Angle Dimension Es necessiten 3 punts per a crear una cota d'angle de 3 punts - + There is no 3D object in your selection No hi ha cap objecte 3D en la selecció - + There are no 3D Edges or Vertices in your selection No hi ha cap aresta o vèrtex 3D en la selecció - - + + Please select a View [and Edges]. Seleccioneu una vista [i una aresta]. - + Select 2 point objects and 1 View. (1) Seleccioneu 2 objectes punt i una vista. (1) - + Select 2 point objects and 1 View. (2) Seleccioneu 2 objectes punt i una vista. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Seleccioneu primer un objecte - + Too many objects selected Massa objectes seleccionats - + Create a page first. Creeu una pàgina primer - + No View of a Part in selection. No hi ha cap vista d'una peça en la selecció. - + No Feature with Shape in selection. No hi ha cap propietat amb forma en la selecció. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Tasca en procés - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Tanca el quadre de diàleg de tasques actiu i intenta-ho altra vegada. - - - - + + + + Selection Error Error de selecció - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Selecció incorrecta - + Can not attach leader. No base View selected. No es pot adjuntar la guia. No s'ha seleccionat cap vista de base. - - - + + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - - + + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - - - + + + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entés la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + No Part Views in this selection No hi ha cap vista de peça en la selecció. - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte eln la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edita un símbol de soldadura + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2064,18 +2109,18 @@ Then you need to increase the tile limit. Mostra les arestes de les seccions - + Maximum hatch line segments to use when hatching a face with a PAT pattern Nombre màxim de segments de tramat que s'han d'utilitzar en aplicar un tramat en una cara amb un patró PAT - + Line End Cap Shape Forma del cap de la línia - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2083,42 +2128,42 @@ can be a performance penalty in complex models. Si està marcada, TechDraw intentarà crear cares utilitzant els segments de línia retornats per l'algoritme d'eliminació de la línia oculta. S'han de detectar cares per a utilitzar el tramat, però en models complexos hi pot haver problemes de baix rendiment. - + Detect Faces Detecta les cares - + Include edges with unexpected geometry (zero length etc.) in results Inclou les arestes amb una geometria inesperada (longitud zero, etc.) en els resultats - + Allow Crazy Edges Permet arestes extravagants - + Max SVG Hatch Tiles Nombre màxim de mosaics de la trama SGV - + Max PAT Hatch Segments Nombre màxim de segments de la trama PAT - + Dimension Format Format de dimensió - + Override automatic dimension format Substitueix el format de dimensió automàtica - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3582,6 +3627,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description S'ha abandonat l'edició en procés. Torna a començar. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Visualitza + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4544,7 +4632,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afig una línia central entre 2 línies @@ -4552,7 +4640,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afig una línia central entre 2 punts @@ -4560,7 +4648,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insereix un vèrtex cosmètic en una vista @@ -4568,7 +4656,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afig una línia central a una cara @@ -4576,7 +4664,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insereix una cota d'extensió horitzontal @@ -4584,7 +4672,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insereix un vèrtex cosmètic en el punt central de les arestes seleccionades @@ -4592,7 +4680,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insereix un vèrtex cosmètic en els punts quadrants dels cercles seleccionats @@ -4600,7 +4688,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insereix una cota d'extensió vertical diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm index 4fc454229a..f898470469 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts index ce03f73723..49be7b3831 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw Vẽ Công nghệ - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + Vẽ Công nghệ + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw Vẽ Công nghệ - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Vẽ Công nghệ - + Insert Annotation Chèn chú thích @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Vẽ Công nghệ - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -170,7 +183,7 @@ Insert Clip Group - Insert Clip Group + Gruppo di clip @@ -183,7 +196,7 @@ Add View to Clip Group - Add View to Clip Group + Thêm khung nhìn vào Nhóm clip @@ -196,18 +209,18 @@ Remove View from Clip Group - Remove View from Clip Group + Xóa một khung nhìn khỏi Nhóm clip CmdTechDrawCosmeticEraser - + TechDraw Vẽ Công nghệ - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Vẽ Công nghệ - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Vẽ Công nghệ - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw Vẽ Công nghệ - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw Vẽ Công nghệ - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw Vẽ Công nghệ - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw Vẽ Công nghệ - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw Vẽ Công nghệ - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw Vẽ Công nghệ - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw Vẽ Công nghệ - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw Vẽ Công nghệ - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw Vẽ Công nghệ - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Vẽ Công nghệ - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw Vẽ Công nghệ - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw Vẽ Công nghệ - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw Vẽ Công nghệ - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw Vẽ Công nghệ - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection Lựa chọn sai @@ -1144,26 +1157,20 @@ Mở khung nhìn vẽ trước khi xuất sang tệp SVG. - - - - - - - - + + + + + + + Incorrect Selection Lựa chọn không đúng - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection Bạn đã không chọn đối tượng 3D nào - + There are no 3D Edges or Vertices in your selection Bạn đã không chọn Cạnh và Đỉnh 3D nào - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Chọn một đối tượng trước - + Too many objects selected Đã chọn quá nhiều đối tượng - + Create a page first. Tạo một trang trước. - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3595,6 +3640,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + Chế độ xem + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -4557,7 +4645,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4565,7 +4653,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4573,7 +4661,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4581,7 +4669,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4589,7 +4677,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4597,7 +4685,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4605,7 +4693,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4613,7 +4701,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm index 56ab29a7cf..276802dd51 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index 2145a70a0b..9427337761 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -12,23 +12,23 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points - Add Centerline between 2 Points + 在 2 点之间添加中心线 CmdMidpoints - + Add Midpoint Vertices - Add Midpoint Vertices + 添加中点 CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw 制图 - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -49,27 +49,40 @@ CmdTechDraw2PointCenterLine - + TechDraw 制图 - + Add Centerline between 2 Points - Add Centerline between 2 Points + 在 2 点之间添加中心线 + + + + CmdTechDraw2PointCosmeticLine + + + TechDraw + 制图 + + + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points CmdTechDraw3PtAngleDimension - + TechDraw 制图 - + Insert 3-Point Angle Dimension - Insert 3-Point Angle Dimension + 插入3点角度尺寸 @@ -82,31 +95,31 @@ Insert Active View (3D View) - Insert Active View (3D View) + 插入活动视图 (三维视图) CmdTechDrawAngleDimension - + TechDraw 制图 - + Insert Angle Dimension - Insert Angle Dimension + 插入角度尺寸 CmdTechDrawAnnotation - + TechDraw 制图 - + Insert Annotation 插入批注 @@ -139,23 +152,23 @@ Insert Balloon Annotation - Insert Balloon Annotation + 插入气球批注 CmdTechDrawCenterLineGroup - + TechDraw 制图 - + Insert Center Line - Insert Center Line + 插入中心线 - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw 制图 - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw 制图 - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw 制图 - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,14 +259,14 @@ CmdTechDrawDecorateLine - + TechDraw 制图 - + Change Appearance of Lines - Change Appearance of Lines + 更改线的外观 @@ -266,7 +279,7 @@ Insert Detail View - Insert Detail View + 插入局部视图 @@ -279,7 +292,7 @@ Insert Diameter Dimension - Insert Diameter Dimension + 插入直径尺寸 @@ -292,7 +305,7 @@ Insert Dimension - Insert Dimension + 插入尺寸 @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw 制图 - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw 制图 - + Add Centerline to Faces Add Centerline to Faces @@ -408,31 +421,31 @@ Hatch a Face using Image File - Hatch a Face using Image File + 使用图像文件为面打剖面线 CmdTechDrawHorizontalDimension - + TechDraw 制图 - + Insert Horizontal Dimension - Insert Horizontal Dimension + 插入水平尺寸 CmdTechDrawHorizontalExtentDimension - + TechDraw 制图 - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -453,7 +466,7 @@ Insert Bitmap from a file into a page - Insert Bitmap from a file into a page + 从文件插入位图到页面 @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw 制图 - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,14 +495,14 @@ CmdTechDrawLeaderLine - + TechDraw 制图 - + Add Leaderline to View - Add Leaderline to View + 添加引导线到视图 @@ -502,33 +515,33 @@ Insert Length Dimension - Insert Length Dimension + 插入长度尺寸 CmdTechDrawLinkDimension - + TechDraw 制图 - + Link Dimension to 3D Geometry - Link Dimension to 3D Geometry + 链接尺寸到三维几何体 CmdTechDrawMidpoints - + TechDraw 制图 - + Add Midpoint Vertices - Add Midpoint Vertices + 添加中点 @@ -541,7 +554,7 @@ Insert Default Page - Insert Default Page + 插入默认页 @@ -554,17 +567,17 @@ Insert Page using Template - Insert Page using Template + 使用模板插入页面 Select a Template File - Select a Template File + 选择模板文件 Template (*.svg *.dxf) - Template (*.svg *.dxf) + 模板 (*.svg *.dxf) @@ -577,23 +590,23 @@ Insert Projection Group - Insert Projection Group + 插入投影组 Insert multiple linked views of drawable object(s) - Insert multiple linked views of drawable object(s) + 插入可绘制对象的多个关联视图 CmdTechDrawQuadrants - + TechDraw 制图 - + Add Quadrant Vertices Add Quadrant Vertices @@ -608,7 +621,7 @@ Insert Radius Dimension - Insert Radius Dimension + 插入半径尺寸 @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw 制图 - + Insert Rich Text Annotation 插入富文本批注 @@ -653,14 +666,14 @@ CmdTechDrawShowAll - + TechDraw 制图 - + Show/Hide Invisible Edges - Show/Hide Invisible Edges + 显示/隐藏不可见边缘 @@ -673,12 +686,12 @@ Insert Spreadsheet View - Insert Spreadsheet View + 插入数据表视图 Insert View to a spreadsheet - Insert View to a spreadsheet + 将视图插入数据表 @@ -696,7 +709,7 @@ Insert symbol from an SVG file - Insert symbol from an SVG file + 从 SVG 文件插入符号 @@ -716,25 +729,25 @@ CmdTechDrawVerticalDimension - + TechDraw 制图 - + Insert Vertical Dimension - Insert Vertical Dimension + 插入垂直尺寸 CmdTechDrawVerticalExtentDimension - + TechDraw 制图 - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -749,25 +762,25 @@ Insert View - Insert View + 插入视图 Insert a View - Insert a View + 插入视图 CmdTechDrawWeldSymbol - + TechDraw 制图 - + Add Welding Information to Leaderline - Add Welding Information to Leaderline + 向指引线添加焊接信息 @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection 选择错误 @@ -1144,26 +1157,20 @@ 在尝试导出到 SVG 之前打开绘图视图。 - - - - - - - - + + + + + + + Incorrect Selection 选择错误 - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ 所选边是贝赛尔曲线。 直径将是近似值。继续？ - + Need two straight edges to make an Angle Dimension 需要两条直边才能形成角度尺寸 - + Need three points to make a 3 point Angle Dimension 需要三点才能形成三点角度尺寸 - + There is no 3D object in your selection 选择中没有3D 对象 - + There are no 3D Edges or Vertices in your selection 选择中没有3D 边或顶点 - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,203 +1261,231 @@ - + Select an object first 首先选择对象 - + Too many objects selected 选择的对象过多 - + Create a page first. 首先创建一个页面。 - + No View of a Part in selection. 没有选择中零件的视图。 - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress 任务正在进行 - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. 关闭活动任务对话框并重试。 - - - - + + + + Selection Error 选择错误 - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. - Can not attach leader. No base View selected. + 无法附加指引线。没有选择基础视图。 - - - + + + + You must select a base View for the line. 您必须为该线选择一个基视图。 - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. 在选择中没有基本视图。 - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected 未选择任何内容 - + At least 1 object in selection is not a part view 至少一个所选对象不是零件视图 - + Unknown object type in selection 选择了未知的对象类型 Replace Hatch? - Replace Hatch? + 替换剖面线? @@ -1595,7 +1630,7 @@ Select a symbol - Select a symbol + 选择符号 @@ -1605,12 +1640,12 @@ Create Center Line - Create Center Line + 创建中心线 Edit Center Line - Edit Center Line + 编辑中心线 @@ -1643,15 +1678,25 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View - New Detail View + 新建局部视图 Edit Detail View - Edit Detail View + 编辑局部视图 @@ -1660,8 +1705,7 @@ You cannot delete this leader line because it has a weld symbol that would become broken. - You cannot delete this leader line because -it has a weld symbol that would become broken. + 指引线 @@ -1701,7 +1745,7 @@ it has a weld symbol that would become broken. You cannot delete this view because it has a leader line that would become broken. - You cannot delete this view because it has a leader line that would become broken. + 您不能删除此视图，因为它有一个指引线会被损坏。 @@ -1794,7 +1838,7 @@ the top and left view border Line Width - Line Width + 线宽 @@ -1804,7 +1848,7 @@ the top and left view border Render Mode - Render Mode + 渲染模式 @@ -1834,7 +1878,7 @@ the top and left view border Hidden Line - Hidden Line + 隐藏线 @@ -1847,7 +1891,7 @@ the top and left view border Welding Symbol - Welding Symbol + 焊接符号 @@ -1868,7 +1912,7 @@ the top and left view border Symbol - Symbol + 符号 @@ -1959,7 +2003,7 @@ This directory will be used for the symbol selection. *.svg - *.svg + *.svg @@ -1969,7 +2013,7 @@ This directory will be used for the symbol selection. Symbol Directory - Symbol Directory + 符号目录 @@ -1983,7 +2027,7 @@ This directory will be used for the symbol selection. Advanced - Advanced + 高级 @@ -2024,7 +2068,7 @@ Then you need to increase the tile limit. Debug Detail - Debug Detail + 调试详情 @@ -2067,19 +2111,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2134,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -2141,7 +2185,7 @@ can be a performance penalty in complex models. Center Line Style - Center Line Style + 中心线线型 @@ -2153,7 +2197,7 @@ can be a performance penalty in complex models. NeverShow - NeverShow + 不显示 @@ -2213,17 +2257,17 @@ can be a performance penalty in complex models. Solid Color - Solid Color + 实体颜色 SVG Hatch - SVG Hatch + SVG剖面线 PAT Hatch - PAT Hatch + PAT剖面线 @@ -2233,7 +2277,7 @@ can be a performance penalty in complex models. Leader Line Auto Horizontal - Leader Line Auto Horizontal + 指引线自动水平 @@ -2243,7 +2287,7 @@ can be a performance penalty in complex models. Type for centerlines - Type for centerlines + 中心线线型 @@ -2299,17 +2343,17 @@ can be a performance penalty in complex models. ANSI - ANSI + ANSI ISO - ISO + ISO Outline shape for detail views - Outline shape for detail views + 局部视图轮廓形状 @@ -2324,12 +2368,12 @@ can be a performance penalty in complex models. Show arc center marks in views - Show arc center marks in views + 在视图中显示圆弧中心标记 Show Center Marks - Show Center Marks + 显示中心标记 @@ -2339,7 +2383,7 @@ can be a performance penalty in complex models. Detail View Outline Shape - Detail View Outline Shape + 局部视图轮廓形状 @@ -2349,7 +2393,7 @@ can be a performance penalty in complex models. Length of horizontal portion of Balloon leader - Length of horizontal portion of Balloon leader + 气球指引线水平部分的长度 @@ -2384,7 +2428,7 @@ can be a performance penalty in complex models. Print Center Marks - Print Center Marks + 打印中心标记 @@ -2423,12 +2467,12 @@ can be a performance penalty in complex models. Hidden Line - Hidden Line + 隐藏线 Hidden line color - Hidden line color + 隐藏线颜色 @@ -2483,7 +2527,7 @@ can be a performance penalty in complex models. Hatch - Hatch + 剖面线 @@ -2498,7 +2542,7 @@ can be a performance penalty in complex models. Color of dimension lines and text. - Color of dimension lines and text. + 尺寸线和文本的颜色. @@ -2513,12 +2557,12 @@ can be a performance penalty in complex models. Centerline - Centerline + 中心线 Centerline color - Centerline color + 中心线颜色 @@ -2553,12 +2597,12 @@ can be a performance penalty in complex models. Leaderline - Leaderline + 指引线 Default color for leader lines - Default color for leader lines + 指引线的默认颜色 @@ -2622,7 +2666,7 @@ can be a performance penalty in complex models. Show Units - Show Units + 显示单位 @@ -2637,17 +2681,17 @@ can be a performance penalty in complex models. Font Size - Font Size + 字体大小 Dimension text font size - Dimension text font size + 尺寸字体大小 Diameter Symbol - Diameter Symbol + 直径符号 @@ -2657,12 +2701,12 @@ can be a performance penalty in complex models. ⌀ - ⌀ + ⌀ Arrow Style - Arrow Style + 箭头样式 @@ -2672,7 +2716,7 @@ can be a performance penalty in complex models. Arrow Size - Arrow Size + 箭头大小 @@ -2697,12 +2741,12 @@ can be a performance penalty in complex models. First - First + 第一视角 Third - Third + 第三视角 @@ -2712,7 +2756,7 @@ can be a performance penalty in complex models. Hidden Line Style - Hidden Line Style + 隐藏线样式 @@ -2796,17 +2840,17 @@ for ProjectionGroups Labels - Labels + 标签 Label Font - Label Font + 标签字体 Label Size - Label Size + 标签大小 @@ -2816,7 +2860,7 @@ for ProjectionGroups Label size - Label size + 标签大小 @@ -2826,17 +2870,17 @@ for ProjectionGroups Default Template - Default Template + 默认模板 Default template file for new pages - Default template file for new pages + 新建页面默认模板 Template Directory - Template Directory + 模板目录 @@ -2876,7 +2920,7 @@ for ProjectionGroups PAT File - PAT File + PAT 文件 @@ -2995,7 +3039,7 @@ Fast, but result is a collection of short straight lines. Hidden - Hidden + 隐藏 @@ -3029,22 +3073,22 @@ Fast, but result is a collection of short straight lines. Page Scale - Page Scale + 页面比例 Default scale for new pages - Default scale for new pages + 新建页面默认比例 View Scale Type - View Scale Type + 视图比例类型 Default scale for new views - Default scale for new views + 新建视图默认比例 @@ -3133,12 +3177,12 @@ Each unit is approx. 0.1 mm wide Center Mark Scale - Center Mark Scale + 中心标记比例 Tolerance Text Scale - Tolerance Text Scale + 公差字体比例 @@ -3148,7 +3192,7 @@ Each unit is approx. 0.1 mm wide Welding Symbol Scale - Welding Symbol Scale + 焊接符号比例 @@ -3271,7 +3315,7 @@ Do you want to continue? Text: - Text: + 文字： @@ -3371,12 +3415,12 @@ Do you want to continue? Leader line width - Leader line width + 指引线宽度 Leader Kink Length: - Leader Kink Length: + 指引线长度： @@ -3445,7 +3489,7 @@ Do you want to continue? Shift Horizontal - Shift Horizontal + 水平偏移 @@ -3455,7 +3499,7 @@ Do you want to continue? Shift Vertical - Shift Vertical + 垂直偏移 @@ -3527,7 +3571,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Extend By - Extend By + 延长 @@ -3593,6 +3637,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description 放弃当前编辑。重新开始。 + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + 视图 + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X: + + + + + Y: + Y: + + + + + Z: + Z: + + TechDrawGui::TaskDetail @@ -3608,7 +3695,7 @@ see the FreeCAD Wiki '2LineCenterLine' for a description Detail View - Detail View + 局部视图 @@ -3623,12 +3710,12 @@ see the FreeCAD Wiki '2LineCenterLine' for a description scale factor for detail view - scale factor for detail view + 局部视图缩放比例 size of detail view - size of detail view + 局部视图大小 @@ -3669,7 +3756,7 @@ Custom: custom scale factor is used Scale Factor - Scale Factor + 缩放比例 @@ -3959,7 +4046,7 @@ You can pick further points to get line segments. Lines - Lines + 直线 @@ -4291,7 +4378,7 @@ using the given X/Y Spacing CenterLine - CenterLine + 中心线 @@ -4435,12 +4522,12 @@ using the given X/Y Spacing BaseView - BaseView + 基本视图 Identifier - Identifier + 标识符 @@ -4512,7 +4599,7 @@ using the given X/Y Spacing Symbol - Symbol + 符号 @@ -4526,7 +4613,7 @@ using the given X/Y Spacing other - other + 其它 @@ -4555,23 +4642,23 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines - Adds a Centerline between 2 Lines + 在两线之间添加中心线 TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points - Adds a Centerline between 2 Points + 在 2 点之间添加中心线 TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4666,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4674,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4682,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4690,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4698,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm index f390a051cf..ae61ecced9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index e0b148cef7..4acd3b2734 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,25 +49,38 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points - CmdTechDraw3PtAngleDimension + CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + + Add Cosmetic Line Through 2 Points + Add Cosmetic Line Through 2 Points + + + + CmdTechDraw3PtAngleDimension + + + TechDraw + TechDraw + + + Insert 3-Point Angle Dimension Insert 3-Point Angle Dimension @@ -88,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Insert Angle Dimension @@ -101,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 插入註釋 @@ -145,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -202,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -215,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -228,17 +241,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -246,12 +259,12 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines @@ -352,22 +365,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Insert Extent Dimension - + Horizontal Extent Horizontal Extent - + Vertical Extent Vertical Extent @@ -375,12 +388,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -414,12 +427,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Insert Horizontal Dimension @@ -427,12 +440,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -469,12 +482,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -482,12 +495,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -508,12 +521,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Link Dimension to 3D Geometry @@ -521,12 +534,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -588,12 +601,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -627,12 +640,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -653,12 +666,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -716,12 +729,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Insert Vertical Dimension @@ -729,12 +742,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -760,12 +773,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1028,16 +1041,16 @@ - - - - - - - - - - + + + + + + + + + + Wrong selection 錯誤的選取 @@ -1144,26 +1157,20 @@ Open Drawing View before attempting export to SVG. - - - - - - - - + + + + + + + Incorrect Selection Incorrect Selection - - - Can not make a Dimension from this selection - Can not make a Dimension from this selection - @@ -1201,38 +1208,38 @@ Selected edge is a BSpline. Diameter will be approximate. Continue? - + Need two straight edges to make an Angle Dimension Need two straight edges to make an Angle Dimension - + Need three points to make a 3 point Angle Dimension Need three points to make a 3 point Angle Dimension - + There is no 3D object in your selection There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection There are no 3D Edges or Vertices in your selection - - + + Please select a View [and Edges]. Please select a View [and Edges]. - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) @@ -1241,11 +1248,11 @@ - - - - - + + + + + @@ -1254,196 +1261,224 @@ - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. 請先建立一個頁面 - + No View of a Part in selection. No View of a Part in selection. - + No Feature with Shape in selection. No Feature with Shape in selection. - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - + + + + Selection Error Selection Error - - - - - + + + + - - + + - - - + + + - - - - - + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - - - + + + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + + Selection is empty. + Selection is empty. + + + + Not enough points in selection. + Not enough points in selection. + + + + Selection is not a Cosmetic Line. + Selection is not a Cosmetic Line. + + + + You must select 2 Vertexes. + You must select 2 Vertexes. + + + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection @@ -1643,6 +1678,16 @@ Edit Welding Symbol Edit Welding Symbol + + + Create Cosmetic Line + Create Cosmetic Line + + + + Edit Cosmetic Line + Edit Cosmetic Line + New Detail View @@ -2067,19 +2112,19 @@ Then you need to increase the tile limit. Show Section Edges - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Line End Cap Shape Line End Cap Shape - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -2090,42 +2135,42 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Max PAT Hatch Segments Max PAT Hatch Segments - + Dimension Format Dimension Format - + Override automatic dimension format Override automatic dimension format - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -3593,6 +3638,49 @@ see the FreeCAD Wiki '2LineCenterLine' for a description In progress edit abandoned. Start over. + + TechDrawGui::TaskCosmeticLine + + + Cosmetic Line + Cosmetic Line + + + + View + 檢視 + + + + + 2d Point + 2d Point + + + + + 3d Point + 3d Point + + + + + X: + X： + + + + + Y: + Y： + + + + + Z: + Z： + + TechDrawGui::TaskDetail @@ -4555,7 +4643,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -4563,7 +4651,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -4571,7 +4659,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -4579,7 +4667,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -4587,7 +4675,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Insert Horizontal Extent Dimension @@ -4595,7 +4683,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -4603,7 +4691,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -4611,7 +4699,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension diff --git a/src/Mod/Test/Gui/Resources/translations/Test_af.qm b/src/Mod/Test/Gui/Resources/translations/Test_af.qm index 5ef199f718..a96afd7098 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_af.qm and b/src/Mod/Test/Gui/Resources/translations/Test_af.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ar.qm b/src/Mod/Test/Gui/Resources/translations/Test_ar.qm index 04a7b370a6..f46252a3a3 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ar.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ar.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ca.qm b/src/Mod/Test/Gui/Resources/translations/Test_ca.qm index 265990f49c..1818a7dafe 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ca.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ca.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_cs.qm b/src/Mod/Test/Gui/Resources/translations/Test_cs.qm index bc70b32bbc..261bf7a5d6 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_cs.qm and b/src/Mod/Test/Gui/Resources/translations/Test_cs.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_de.qm b/src/Mod/Test/Gui/Resources/translations/Test_de.qm index c4d76a96a8..5524b0dd22 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_de.qm and b/src/Mod/Test/Gui/Resources/translations/Test_de.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_el.qm b/src/Mod/Test/Gui/Resources/translations/Test_el.qm index 351354dfea..bfc6c8db88 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_el.qm and b/src/Mod/Test/Gui/Resources/translations/Test_el.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_es-ES.qm b/src/Mod/Test/Gui/Resources/translations/Test_es-ES.qm index 120f52fd0f..749c577e9c 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_es-ES.qm and b/src/Mod/Test/Gui/Resources/translations/Test_es-ES.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_eu.qm b/src/Mod/Test/Gui/Resources/translations/Test_eu.qm index 0511add59f..5990a6d073 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_eu.qm and b/src/Mod/Test/Gui/Resources/translations/Test_eu.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_fi.qm b/src/Mod/Test/Gui/Resources/translations/Test_fi.qm index 735681de19..2bde703af0 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_fi.qm and b/src/Mod/Test/Gui/Resources/translations/Test_fi.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_fil.qm b/src/Mod/Test/Gui/Resources/translations/Test_fil.qm index b5c5921764..94cc8dba53 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_fil.qm and b/src/Mod/Test/Gui/Resources/translations/Test_fil.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_fr.qm b/src/Mod/Test/Gui/Resources/translations/Test_fr.qm index 2e7dfe7836..7946e375c7 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_fr.qm and b/src/Mod/Test/Gui/Resources/translations/Test_fr.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_gl.qm b/src/Mod/Test/Gui/Resources/translations/Test_gl.qm index 235f11eb6f..ddce251c33 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_gl.qm and b/src/Mod/Test/Gui/Resources/translations/Test_gl.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_hr.qm b/src/Mod/Test/Gui/Resources/translations/Test_hr.qm index 77d1005694..723ff32dc3 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_hr.qm and b/src/Mod/Test/Gui/Resources/translations/Test_hr.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_hu.qm b/src/Mod/Test/Gui/Resources/translations/Test_hu.qm index 6a4f33521d..fefc8141a7 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_hu.qm and b/src/Mod/Test/Gui/Resources/translations/Test_hu.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_id.qm b/src/Mod/Test/Gui/Resources/translations/Test_id.qm index 079ffef4e4..5fc7399498 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_id.qm and b/src/Mod/Test/Gui/Resources/translations/Test_id.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_it.qm b/src/Mod/Test/Gui/Resources/translations/Test_it.qm index a1132dfe04..07a01e2e31 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_it.qm and b/src/Mod/Test/Gui/Resources/translations/Test_it.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ja.qm b/src/Mod/Test/Gui/Resources/translations/Test_ja.qm index 696665fa23..218d62079d 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ja.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ja.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_kab.qm b/src/Mod/Test/Gui/Resources/translations/Test_kab.qm index 91a1f98f5d..6fa5188c36 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_kab.qm and b/src/Mod/Test/Gui/Resources/translations/Test_kab.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ko.qm b/src/Mod/Test/Gui/Resources/translations/Test_ko.qm index 2f41ddc6a0..f93cea3e66 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ko.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ko.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_lt.qm b/src/Mod/Test/Gui/Resources/translations/Test_lt.qm index 8d57647364..ec9d2ccc65 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_lt.qm and b/src/Mod/Test/Gui/Resources/translations/Test_lt.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_nl.qm b/src/Mod/Test/Gui/Resources/translations/Test_nl.qm index 8cce4b0872..5f6d6e6cb6 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_nl.qm and b/src/Mod/Test/Gui/Resources/translations/Test_nl.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_no.qm b/src/Mod/Test/Gui/Resources/translations/Test_no.qm index 4880b82964..1034825cdf 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_no.qm and b/src/Mod/Test/Gui/Resources/translations/Test_no.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_pl.qm b/src/Mod/Test/Gui/Resources/translations/Test_pl.qm index eb728adce5..96040c55b1 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_pl.qm and b/src/Mod/Test/Gui/Resources/translations/Test_pl.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_pl.ts b/src/Mod/Test/Gui/Resources/translations/Test_pl.ts index 3f838b955a..fd0eb21ea9 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_pl.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_pl.ts @@ -6,7 +6,7 @@ FreeCAD UnitTest - FreeCAD UnitTest + Środowisko pracy FreeCAD UnitTest @@ -86,7 +86,7 @@ Run: - Uruchom: + Wykonaj: @@ -112,12 +112,15 @@ Click 'start', and the test thus produced will be run. Double click on an error in the tree view to see more information about it, including the stack trace. - Wprowadź nazwę wywoływanego obiektu, jeżeli zostanie wywołany, zwróci TestCase. Wybierz 'start', a utworzony test zostanie uruchomiony. + Wprowadź nazwę obiektu typu callable, który po wywołaniu zwróci TestCase. +Kliknij 'start', a utworzony w ten sposób test zostanie uruchomiony. + +Kliknij dwukrotnie na pozycję z błędem w widoku drzewa, aby zobaczyć więcej informacji na jego temat, w tym śledzenie stosu. About FreeCAD UnitTest - O FreeCAD UnitTest + O środowisku pracy FreeCAD UnitTest @@ -126,7 +129,7 @@ Double click on an error in the tree view to see more information about it, incl FreeCAD UnitTest is part of FreeCAD and supports writing Unit Tests for ones own modules. Copyright (c) Werner Mayer -FreeCAD UnitTest jest częścią FreeCAD i wspiera pisanie Jednostek Testowych dla własnych modułów. +Środowisko pracy FreeCAD UnitTest jest częścią FreeCAD i wspiera pisanie własnych testów dla własnych modułów. diff --git a/src/Mod/Test/Gui/Resources/translations/Test_pt-BR.qm b/src/Mod/Test/Gui/Resources/translations/Test_pt-BR.qm index 2b2f40f34d..c7a98b4bb7 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_pt-BR.qm and b/src/Mod/Test/Gui/Resources/translations/Test_pt-BR.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_pt-PT.qm b/src/Mod/Test/Gui/Resources/translations/Test_pt-PT.qm index da9f0d6884..a08f94e519 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_pt-PT.qm and b/src/Mod/Test/Gui/Resources/translations/Test_pt-PT.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ro.qm b/src/Mod/Test/Gui/Resources/translations/Test_ro.qm index 6494f11fd2..7ab55747dc 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ro.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ro.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ru.qm b/src/Mod/Test/Gui/Resources/translations/Test_ru.qm index 39e4e91619..d11228ce79 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ru.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ru.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sk.qm b/src/Mod/Test/Gui/Resources/translations/Test_sk.qm index b3bad8e02e..dfd3eaa903 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_sk.qm and b/src/Mod/Test/Gui/Resources/translations/Test_sk.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sl.qm b/src/Mod/Test/Gui/Resources/translations/Test_sl.qm index 9220c12abf..6d3ae96f4e 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_sl.qm and b/src/Mod/Test/Gui/Resources/translations/Test_sl.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sr.qm b/src/Mod/Test/Gui/Resources/translations/Test_sr.qm index 08bca8529a..e8ae7b0be8 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_sr.qm and b/src/Mod/Test/Gui/Resources/translations/Test_sr.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sv-SE.qm b/src/Mod/Test/Gui/Resources/translations/Test_sv-SE.qm index dabcae446f..26d41551db 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_sv-SE.qm and b/src/Mod/Test/Gui/Resources/translations/Test_sv-SE.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_tr.qm b/src/Mod/Test/Gui/Resources/translations/Test_tr.qm index bffbc458cf..c90265f368 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_tr.qm and b/src/Mod/Test/Gui/Resources/translations/Test_tr.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_uk.qm b/src/Mod/Test/Gui/Resources/translations/Test_uk.qm index 7501174682..ef30c97d3c 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_uk.qm and b/src/Mod/Test/Gui/Resources/translations/Test_uk.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_val-ES.qm b/src/Mod/Test/Gui/Resources/translations/Test_val-ES.qm index ea08749289..abe6b23540 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_val-ES.qm and b/src/Mod/Test/Gui/Resources/translations/Test_val-ES.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_vi.qm b/src/Mod/Test/Gui/Resources/translations/Test_vi.qm index 766399c5c3..b15bb45af8 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_vi.qm and b/src/Mod/Test/Gui/Resources/translations/Test_vi.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_zh-CN.qm b/src/Mod/Test/Gui/Resources/translations/Test_zh-CN.qm index 8c784e70b8..8daa49ecc3 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_zh-CN.qm and b/src/Mod/Test/Gui/Resources/translations/Test_zh-CN.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_zh-TW.qm b/src/Mod/Test/Gui/Resources/translations/Test_zh-TW.qm index a88c44353d..476749fd3c 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_zh-TW.qm and b/src/Mod/Test/Gui/Resources/translations/Test_zh-TW.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_af.qm b/src/Mod/Tux/Resources/translations/Tux_af.qm index 044f098f43..48f6728313 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_af.qm and b/src/Mod/Tux/Resources/translations/Tux_af.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ar.qm b/src/Mod/Tux/Resources/translations/Tux_ar.qm index bdfc3d2d4f..0edf4f63f2 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ar.qm and b/src/Mod/Tux/Resources/translations/Tux_ar.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ca.qm b/src/Mod/Tux/Resources/translations/Tux_ca.qm index bef3c0a645..f6c4824dc3 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ca.qm and b/src/Mod/Tux/Resources/translations/Tux_ca.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_cs.qm b/src/Mod/Tux/Resources/translations/Tux_cs.qm index 6db5a7c600..1197c9d241 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_cs.qm and b/src/Mod/Tux/Resources/translations/Tux_cs.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_de.qm b/src/Mod/Tux/Resources/translations/Tux_de.qm index ed070f985c..7e0420c38d 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_de.qm and b/src/Mod/Tux/Resources/translations/Tux_de.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_el.qm b/src/Mod/Tux/Resources/translations/Tux_el.qm index 416640cf85..9924b30ec6 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_el.qm and b/src/Mod/Tux/Resources/translations/Tux_el.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_es-ES.qm b/src/Mod/Tux/Resources/translations/Tux_es-ES.qm index 57ff307fd3..50c0e2f38f 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_es-ES.qm and b/src/Mod/Tux/Resources/translations/Tux_es-ES.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_eu.qm b/src/Mod/Tux/Resources/translations/Tux_eu.qm index 08aadc596f..d683ebb743 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_eu.qm and b/src/Mod/Tux/Resources/translations/Tux_eu.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_fi.qm b/src/Mod/Tux/Resources/translations/Tux_fi.qm index a101a29d5d..bbb77711b4 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_fi.qm and b/src/Mod/Tux/Resources/translations/Tux_fi.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_fil.qm b/src/Mod/Tux/Resources/translations/Tux_fil.qm index ce11af9e47..30377b3b73 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_fil.qm and b/src/Mod/Tux/Resources/translations/Tux_fil.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_fr.qm b/src/Mod/Tux/Resources/translations/Tux_fr.qm index b8b8a1f468..1aaf186976 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_fr.qm and b/src/Mod/Tux/Resources/translations/Tux_fr.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_gl.qm b/src/Mod/Tux/Resources/translations/Tux_gl.qm index 3d3cd929ff..aec5f3241b 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_gl.qm and b/src/Mod/Tux/Resources/translations/Tux_gl.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_hr.qm b/src/Mod/Tux/Resources/translations/Tux_hr.qm index 503b3f141f..f58c7189f8 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_hr.qm and b/src/Mod/Tux/Resources/translations/Tux_hr.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_hu.qm b/src/Mod/Tux/Resources/translations/Tux_hu.qm index 02c710bf13..94e85ba915 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_hu.qm and b/src/Mod/Tux/Resources/translations/Tux_hu.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_id.qm b/src/Mod/Tux/Resources/translations/Tux_id.qm index d91123ca9b..31fc9b91a0 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_id.qm and b/src/Mod/Tux/Resources/translations/Tux_id.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_it.qm b/src/Mod/Tux/Resources/translations/Tux_it.qm index d1fdc720cf..5238377894 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_it.qm and b/src/Mod/Tux/Resources/translations/Tux_it.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ja.qm b/src/Mod/Tux/Resources/translations/Tux_ja.qm index 4bd70c22a9..bbdfa88b9c 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ja.qm and b/src/Mod/Tux/Resources/translations/Tux_ja.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_kab.qm b/src/Mod/Tux/Resources/translations/Tux_kab.qm index 522f0185ed..10c6b39433 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_kab.qm and b/src/Mod/Tux/Resources/translations/Tux_kab.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ko.qm b/src/Mod/Tux/Resources/translations/Tux_ko.qm index cb66442993..9c9be12f34 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ko.qm and b/src/Mod/Tux/Resources/translations/Tux_ko.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_lt.qm b/src/Mod/Tux/Resources/translations/Tux_lt.qm index 8435dc704d..f8f3282bd0 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_lt.qm and b/src/Mod/Tux/Resources/translations/Tux_lt.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_nl.qm b/src/Mod/Tux/Resources/translations/Tux_nl.qm index 26dc1a865d..9d1806753f 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_nl.qm and b/src/Mod/Tux/Resources/translations/Tux_nl.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_no.qm b/src/Mod/Tux/Resources/translations/Tux_no.qm index 33c409cb3c..6b894d30e2 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_no.qm and b/src/Mod/Tux/Resources/translations/Tux_no.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_pl.qm b/src/Mod/Tux/Resources/translations/Tux_pl.qm index b8297ac498..d97a37e855 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_pl.qm and b/src/Mod/Tux/Resources/translations/Tux_pl.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_pl.ts b/src/Mod/Tux/Resources/translations/Tux_pl.ts index 912f16e917..9b31d6624e 100644 --- a/src/Mod/Tux/Resources/translations/Tux_pl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_pl.ts @@ -11,7 +11,7 @@ Zoom - Powiększenie + Powiększ @@ -36,7 +36,7 @@ Page Up or Page Down key. - Klawisz Page Up lub Page Down. + Klawisz strona w górę lub strona w dół. @@ -46,7 +46,7 @@ Middle mouse button. - Środkowy przycisk myszy. + Środkowy przycisk myszki. @@ -81,7 +81,7 @@ Trackball - Manipulator kulkowy + Trackball @@ -91,7 +91,7 @@ Middle mouse button or H key. - Środkowy przycisk myszy lub klawisz H. + Środkowy przycisk myszki lub klawisz H. diff --git a/src/Mod/Tux/Resources/translations/Tux_pt-BR.qm b/src/Mod/Tux/Resources/translations/Tux_pt-BR.qm index 6a6d484f1c..1238976aae 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_pt-BR.qm and b/src/Mod/Tux/Resources/translations/Tux_pt-BR.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_pt-PT.qm b/src/Mod/Tux/Resources/translations/Tux_pt-PT.qm index a148b501e0..45a99fe44e 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_pt-PT.qm and b/src/Mod/Tux/Resources/translations/Tux_pt-PT.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ro.qm b/src/Mod/Tux/Resources/translations/Tux_ro.qm index d43fad4018..9e02ca6988 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ro.qm and b/src/Mod/Tux/Resources/translations/Tux_ro.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_ru.qm b/src/Mod/Tux/Resources/translations/Tux_ru.qm index 87a5726978..faa02f25f4 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_ru.qm and b/src/Mod/Tux/Resources/translations/Tux_ru.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_sk.qm b/src/Mod/Tux/Resources/translations/Tux_sk.qm index 5af7f9c7fc..ec8dcab3c0 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_sk.qm and b/src/Mod/Tux/Resources/translations/Tux_sk.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_sl.qm b/src/Mod/Tux/Resources/translations/Tux_sl.qm index e61d5e0bff..2c516513e6 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_sl.qm and b/src/Mod/Tux/Resources/translations/Tux_sl.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_sl.ts b/src/Mod/Tux/Resources/translations/Tux_sl.ts index 31463c65b4..76f15df882 100644 --- a/src/Mod/Tux/Resources/translations/Tux_sl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_sl.ts @@ -91,7 +91,7 @@ Middle mouse button or H key. - Srednji gumb miške ali tipka H. + Srednja miškina tipka ali tipka H. diff --git a/src/Mod/Tux/Resources/translations/Tux_sr.qm b/src/Mod/Tux/Resources/translations/Tux_sr.qm index c3fb2d6163..5de182a525 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_sr.qm and b/src/Mod/Tux/Resources/translations/Tux_sr.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_sv-SE.qm b/src/Mod/Tux/Resources/translations/Tux_sv-SE.qm index f6d1165f0b..1b65511a66 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_sv-SE.qm and b/src/Mod/Tux/Resources/translations/Tux_sv-SE.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_tr.qm b/src/Mod/Tux/Resources/translations/Tux_tr.qm index 38adee962a..ec9c2a0c30 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_tr.qm and b/src/Mod/Tux/Resources/translations/Tux_tr.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_uk.qm b/src/Mod/Tux/Resources/translations/Tux_uk.qm index b81cffac08..81043e6c25 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_uk.qm and b/src/Mod/Tux/Resources/translations/Tux_uk.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_val-ES.qm b/src/Mod/Tux/Resources/translations/Tux_val-ES.qm index 794721616b..5948658f6e 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_val-ES.qm and b/src/Mod/Tux/Resources/translations/Tux_val-ES.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_vi.qm b/src/Mod/Tux/Resources/translations/Tux_vi.qm index 88ea9b3eb0..3638ee449e 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_vi.qm and b/src/Mod/Tux/Resources/translations/Tux_vi.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm index db6cdd2f86..7a1ea64e3f 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm and b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-TW.qm b/src/Mod/Tux/Resources/translations/Tux_zh-TW.qm index 750264e75f..8bad014088 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_zh-TW.qm and b/src/Mod/Tux/Resources/translations/Tux_zh-TW.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_af.qm b/src/Mod/Web/Gui/Resources/translations/Web_af.qm index f68f8507be..fc8315f65e 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_af.qm and b/src/Mod/Web/Gui/Resources/translations/Web_af.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_af.ts b/src/Mod/Web/Gui/Resources/translations/Web_af.ts index 9c7e670e0b..271efb1386 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_af.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_af.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Webleser @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Laai tans%1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ar.qm b/src/Mod/Web/Gui/Resources/translations/Web_ar.qm index fe8e41ccbc..abed6db639 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ar.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ar.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts index d15c29d5c1..a0489850d8 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts @@ -128,8 +128,8 @@ QObject - - + + Browser المتصفح @@ -153,7 +153,7 @@ ظهرت أخطاء أثناء تحميل الملف. ربما قد تم تعديل بعض البيانات أو أنه لم يتم استرجاعها. للمزيد من المعلومات المحددة عن العناصر المعنية يرجى الاطلاع على التقرير. - + Loading %1... تحميل %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.qm b/src/Mod/Web/Gui/Resources/translations/Web_ca.qm index b2842488c9..97e2c35770 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ca.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ca.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts index c0a842e74e..d849e41e94 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Hi hagué errors quan es carregava el fitxer. Algunes dades s'han pogut modificar o no s'han recuperat. Cerqueu a la vista d'informes per a obtindre informació més específica sobre els objectes implicats. - + Loading %1... Carregant 1%... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.qm b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm index 36e1d569c6..1657ec8195 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_cs.qm and b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts index a2a0d5fe30..1a7c605bfd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Prohlížeč @@ -153,7 +153,7 @@ Při načítání souboru se objevily chyby. Některé data mohla být modifikována nebo nebyla vůbec obnovena. Podívejte se do Zobrazení reportu pro konkrétnější informaci o zúčastněných objektech. - + Loading %1... Načítání %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.qm b/src/Mod/Web/Gui/Resources/translations/Web_de.qm index bc7aa68475..d0257592c6 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_de.qm and b/src/Mod/Web/Gui/Resources/translations/Web_de.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.ts b/src/Mod/Web/Gui/Resources/translations/Web_de.ts index e65190edee..876ac31b37 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_de.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_de.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Browser @@ -153,7 +153,7 @@ Beim Laden der Datei sind Fehler aufgetreten. Einige Daten wurden möglicherweise geändert oder gar nicht wiederhergestellt. In der Berichtansicht finden Sie genauere Informationen zu den betroffenen Objekten. - + Loading %1... %1 wird geladen... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_el.qm b/src/Mod/Web/Gui/Resources/translations/Web_el.qm index 34bd89188d..8cd6443880 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_el.qm and b/src/Mod/Web/Gui/Resources/translations/Web_el.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_el.ts b/src/Mod/Web/Gui/Resources/translations/Web_el.ts index 662b2fea24..25f1c2d1e6 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_el.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_el.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Περιηγητής @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Πραγματοποιείται φόρτωση του %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm index 6459310617..effc1d8af4 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm and b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts index be073e40f4..b4b2f31224 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Hubo errores al cargar el archivo. Algunos datos pueden haber sido modificados o no recuperados en absoluto. Busque en la vista de informe para obtener información más específica sobre los objetos involucrados. - + Loading %1... Cargando %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.qm b/src/Mod/Web/Gui/Resources/translations/Web_eu.qm index a14eff6045..924a4441b2 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_eu.qm and b/src/Mod/Web/Gui/Resources/translations/Web_eu.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts index 73cf995b0b..3ca390f200 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Nabigatzailea @@ -153,7 +153,7 @@ Erroreak izan dira fitxategia kargatzean. Beharbada zenbait datu aldatu egin dira edo ez dira erabat berreskuratu. Begiratu txostenean arazoak izan dituzten objektuei buruzko informazio gehiago jasotzeko. - + Loading %1... %1 kargatzen... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.qm b/src/Mod/Web/Gui/Resources/translations/Web_fi.qm index 11e39809c7..f60f1644b7 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_fi.qm and b/src/Mod/Web/Gui/Resources/translations/Web_fi.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts index 5970629beb..aff2d5525c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Selain @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Ladataan %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fil.qm b/src/Mod/Web/Gui/Resources/translations/Web_fil.qm index 5af8201eca..f94fbf376b 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_fil.qm and b/src/Mod/Web/Gui/Resources/translations/Web_fil.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fil.ts b/src/Mod/Web/Gui/Resources/translations/Web_fil.ts index d1c5e3d012..1803ed209d 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fil.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fil.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Browser @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Naghahakut %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.qm b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm index 6c0f5b423b..f633dee36f 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_fr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts index 8a57c927ca..27a5d7220c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navigateur @@ -153,7 +153,7 @@ Des erreurs sont survenues lors du chargement du fichier. Certaines données pourraient avoir été modifiées, ou pas récupérées du tout. Consultez la vue rapport pour plus d’informations sur les objets concernés. - + Loading %1... Chargement %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.qm b/src/Mod/Web/Gui/Resources/translations/Web_gl.qm index 4f3092e0f4..ee78d57ca0 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_gl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_gl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts index f5546ac882..34ec036c45 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Houbo erros ao cargar o ficheiro. Alúns dados poden ter sido modificados ou non recuperados de todo. Vexa a vista do informe para obter información máis específica sobre os obxectos ligados. - + Loading %1... Cargando %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.qm b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm index 65f993595e..2906602418 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_hr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts index 251ac59251..7e9c2855fd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Preglednik @@ -153,7 +153,7 @@ Pojavile su se pogreške tijekom učitavanja datoteke. Neki podaci su možda promijenjeni ili nisu oporavljeni potuno. Pogledajte prikaz izvješća za više podataka o objektima koji su uključeni. - + Loading %1... Učitavanje %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.qm b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm index 5440b6a707..2d3f643caf 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_hu.qm and b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts index 17653defbb..886f377a8f 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Böngésző @@ -153,7 +153,7 @@ Hiba történt a fájl betöltésekor. Néhány adat lehet, hogy módosított vagy nem egyáltalán nem viszaállított. Nézze meg a jelentés nézetet részletesebb információért az érintett objektumokhoz. - + Loading %1... %1 betöltve... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_id.qm b/src/Mod/Web/Gui/Resources/translations/Web_id.qm index 427040dd56..68f19f9cf3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_id.qm and b/src/Mod/Web/Gui/Resources/translations/Web_id.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_id.ts b/src/Mod/Web/Gui/Resources/translations/Web_id.ts index f3a803434b..529c83a143 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_id.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_id.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Browser @@ -153,7 +153,7 @@ Ada kesalahan saat memuat file. Beberapa data mungkin telah dimodifikasi atau tidak dipulihkan sama sekali. Lihat di tampilan laporan untuk informasi yang lebih spesifik tentang objek yang terlibat. - + Loading %1... Memuat %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.qm b/src/Mod/Web/Gui/Resources/translations/Web_it.qm index 7f8c668dc9..43414e5641 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_it.qm and b/src/Mod/Web/Gui/Resources/translations/Web_it.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.ts b/src/Mod/Web/Gui/Resources/translations/Web_it.ts index e13c259c77..34e29fe3d3 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_it.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_it.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Browser @@ -153,7 +153,7 @@ Si sono verificati degli errori durante il caricamento del file. Alcuni dati potrebbero essere stati modificati o non acquisiti. Guardare nella vista report per avere informazioni più specifiche sugli oggetti coinvolti. - + Loading %1... Caricamento %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.qm b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm index 7debddf5b1..5fb4e927c3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ja.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts index f6707c025e..b3a38dfd80 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts @@ -128,8 +128,8 @@ QObject - - + + Browser ブラウザー @@ -153,7 +153,7 @@ ファイルの読み込み中にエラーが発生しました。一部のデータが変更、または完全に復元されていない可能性があります。関連するオブジェクトのより詳細な情報についてはレポートビューを確認してください。 - + Loading %1... %1 を読み込み中・・・ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_kab.qm b/src/Mod/Web/Gui/Resources/translations/Web_kab.qm index d64292f60f..0a51f40bd3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_kab.qm and b/src/Mod/Web/Gui/Resources/translations/Web_kab.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_kab.ts b/src/Mod/Web/Gui/Resources/translations/Web_kab.ts index d53df377cc..b785ef61a3 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_kab.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_kab.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Iminig @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Loading %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ko.qm b/src/Mod/Web/Gui/Resources/translations/Web_ko.qm index 930fe3c956..b2852b084d 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ko.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ko.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ko.ts b/src/Mod/Web/Gui/Resources/translations/Web_ko.ts index 8d9d294d03..a68c78e48d 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ko.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ko.ts @@ -128,8 +128,8 @@ QObject - - + + Browser 브라우저 @@ -153,7 +153,7 @@ 파일을 불러오는 도중 문제가 생겼습니다. 일부 데이터가 수정되거나 전혀 복구되지 않았을 수 있습니다. 해당 개체에 대한 보다 구체적인 정보를 확인하려면 보고서를 보세요. - + Loading %1... %1 로딩 중... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_lt.qm b/src/Mod/Web/Gui/Resources/translations/Web_lt.qm index 06fb8ec51f..252e584079 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_lt.qm and b/src/Mod/Web/Gui/Resources/translations/Web_lt.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_lt.ts b/src/Mod/Web/Gui/Resources/translations/Web_lt.ts index d2b42c1d4b..40d46000f4 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_lt.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_lt.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Naršyklė @@ -153,7 +153,7 @@ Įkeliant failą įvyko klaidų. Kai kurie duomenys gali būti pakeisti arba atstatyti ne iki galo. Norėdami sužinoti daugiau apie paveiktus objektus, pažvelkite į ataskaitos rodinį. - + Loading %1... Įkeliama %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.qm b/src/Mod/Web/Gui/Resources/translations/Web_nl.qm index 1879960a5e..8cef82ea86 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_nl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_nl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts index 51a39507b5..12b443d528 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Browser @@ -153,7 +153,7 @@ Er zijn fouten opgetreden tijdens het laden van het bestand. Sommige gegevens zijn misschien gewijzigd of helemaal hersteld. Kijk in de rapportweergave voor meer specifieke informatie over de objecten die hierbij zijn betrokken. - + Loading %1... Laden %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_no.qm b/src/Mod/Web/Gui/Resources/translations/Web_no.qm index 9a3cc8d96a..75b08f2fa9 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_no.qm and b/src/Mod/Web/Gui/Resources/translations/Web_no.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_no.ts b/src/Mod/Web/Gui/Resources/translations/Web_no.ts index 809446e294..01c1743363 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_no.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_no.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Nettleser @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Laster inn %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.qm b/src/Mod/Web/Gui/Resources/translations/Web_pl.qm index 3e996e2c3b..0436f319e8 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_pl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_pl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts index 5605452c8b..86b7dde1ae 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Przeglądarka @@ -153,7 +153,7 @@ Podczas wczytywania pliku wystąpiły błędy. Niektóre dane mogły zostać zmodyfikowane lub w ogóle nie zostały odtworzone. Zajrzyj do widoku raportu w celu uzyskania bardziej szczegółowych informacji na temat obiektów, których to dotyczy. - + Loading %1... Ładowanie %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm index ab3a191985..e3946d8956 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm and b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts index a28d0d1d4f..755ed7ce00 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Houve erros ao carregar o arquivo. Alguns dados podem ter sido modificados ou não recuperados. Veja a vista de relatório para obter informações mais específicas sobre os objetos envolvidos. - + Loading %1... Carregando %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm index e3d12c1963..ac6fe49072 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm and b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts index 5b81e9a70c..1740d05aac 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Houve erros ao carregar o ficheiro. Alguns dados podem ter sido modificados ou não recuperados de todo. Veja a vista de relatório para obter informações mais específicas sobre os objetos envolvidos. - + Loading %1... Carregando %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.qm b/src/Mod/Web/Gui/Resources/translations/Web_ro.qm index b14ddd25e1..e0408d9dc3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ro.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ro.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts index 826904a194..8263ec1a01 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navigator @@ -153,7 +153,7 @@ Au existat erori în timpul încărcării fişierului. Unele date s-ar putea să fi fost modificate sau să se nu recupereze deloc. Uitați-vă în raportul vizualizării pentru mai multe informaţii specifice despre obiectele implicate. - + Loading %1... Se încarcă %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.qm b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm index c03241d251..ea6bf1a93c 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_ru.qm and b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts index 0a5ba6ccdf..154b95e514 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Браузер @@ -153,7 +153,7 @@ Произошли ошибки при загрузке файла. Возможно, некоторые данные были изменены или не восстановлены. Посмотрите в окно отчета для более конкретной информации о затронутых объектах. - + Loading %1... Загрузка %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sk.qm b/src/Mod/Web/Gui/Resources/translations/Web_sk.qm index cf517b4260..b985bd3ab3 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_sk.qm and b/src/Mod/Web/Gui/Resources/translations/Web_sk.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sk.ts b/src/Mod/Web/Gui/Resources/translations/Web_sk.ts index 8d930bf733..06497da130 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sk.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sk.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Prehliadač @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Načítanie %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.qm b/src/Mod/Web/Gui/Resources/translations/Web_sl.qm index 903d55c8e7..5e40450ab6 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_sl.qm and b/src/Mod/Web/Gui/Resources/translations/Web_sl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts index c38290d7e1..1dc149a6d9 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Brskalnik @@ -153,7 +153,7 @@ Med nalaganjem datoteke je prišlo do napake. Nekateri podatki so se lahko spremenili ali pa se sploh niso obnovili. Poglej v okno poročil za podrobnejše informacije o vpletenih objektih. - + Loading %1... Nalaganje %1 … diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr.qm b/src/Mod/Web/Gui/Resources/translations/Web_sr.qm index 0f6700b5bc..a8fa74bf79 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_sr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_sr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr.ts b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts index 20be00ffdd..9edbf9b3eb 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Прегледач @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Учитавање %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm index c84298fb11..ef00108599 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm and b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts index b585a8d80a..5831aed57b 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Webbläsare @@ -153,7 +153,7 @@ Det uppstod ett fel under inläsning av filen. Viss data kan ha ändrats eller inte återställts alls. Titta i rapportvyn för mer specifik information om de inblandade objekten. - + Loading %1... Laddar %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_tr.qm b/src/Mod/Web/Gui/Resources/translations/Web_tr.qm index 41ffb23f18..81f9a53f8b 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_tr.qm and b/src/Mod/Web/Gui/Resources/translations/Web_tr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts index 2947d21c7e..267c69807f 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Tarayıcı @@ -153,7 +153,7 @@ Dosya yüklemesi esnasında hatalar vardı. Bazı veriler değiştirilmiş veya hiç kurtarılmamış olabilir. İlgili nesneler hakkında daha spesifik bilgi için rapor görünümüne bakın. - + Loading %1... Yükleniyor %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.qm b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm index 09572b1ac0..d121440bfd 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_uk.qm and b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts index 04e15a4ccd..f5157ff5fd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Браузер @@ -150,10 +150,10 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - Відбулися помилки при завантаженні файлу. Можливо, деякі дані були змінені або не відновлені. Подивіться у вікно звіту для більш конкретної інформації про порушених об'єктах. + Під час завантаження файлу виникли помилки. Деякі дані, можливо, були змінені або взагалі не відновлені. Ознайомтесь зі звітом для більш отримання конкретної інформації щодо таких об'єктів. - + Loading %1... Завантаження %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm index 634c8a0348..ede98fdae4 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm and b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts index d841d9cbec..968c7fe6f7 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Navegador @@ -153,7 +153,7 @@ Hi hagué errors quan es carregava el fitxer. Algunes dades s'han pogut modificar o no s'han recuperat. Busqueu en la vista d'informes per a obtindre informació més específica sobre els objectes implicats. - + Loading %1... S'està carregant 1%... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_vi.qm b/src/Mod/Web/Gui/Resources/translations/Web_vi.qm index 924c871299..35ccc2f3f1 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_vi.qm and b/src/Mod/Web/Gui/Resources/translations/Web_vi.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_vi.ts b/src/Mod/Web/Gui/Resources/translations/Web_vi.ts index f7ba024462..d3270aa9a9 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_vi.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_vi.ts @@ -128,8 +128,8 @@ QObject - - + + Browser Trình duyệt @@ -153,7 +153,7 @@ There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... Đang tải %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm index 4ab60d9818..942562273c 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm and b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts index 7b2f7494ea..236f4efc69 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts @@ -128,8 +128,8 @@ QObject - - + + Browser 浏览器 @@ -153,7 +153,7 @@ 加载文件时出错。有些数据可能已经修改或未全部恢复。在报告视图中查看有关对象的更具体信息。 - + Loading %1... 正在加载 %1... diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm index 7bb6cf6edc..62e39a6aa6 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm and b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts index 3e866c3a35..c735c55e23 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts @@ -128,8 +128,8 @@ QObject - - + + Browser 瀏覽器 @@ -153,7 +153,7 @@ 載入檔案時出錯. 某些數據可能已被修改或根本未恢復. 查看報告來了解所涉及物件的更多具體資訊. - + Loading %1... 載入 %1...