From 094036c3c7250b35ec805f393fc601e786c2e18e Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Wed, 26 Jan 2022 13:59:39 +0100 Subject: [PATCH] Regenerated ts files --- .../Resources/translations/AddonManager.ts | 213 ++- src/Mod/Arch/Resources/translations/Arch.ts | 396 +++-- src/Mod/Draft/Resources/translations/Draft.ts | 469 ++++-- .../Path/Gui/Resources/translations/Path.ts | 1413 ++++++++++++----- .../Gui/Resources/translations/TechDraw.ts | 86 + 5 files changed, 1905 insertions(+), 672 deletions(-) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index af71658171..89513d3ef7 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -245,21 +245,6 @@ OK - - - Error with encrypted connection - - - - - Failed to connect to - - - - - Failed to connect to URL - - Checking network connection... @@ -311,6 +296,11 @@ Failed to read metadata from + + + git fetch failed for {wb.name} + + git pull failed for {wb.name} @@ -321,11 +311,31 @@ Done locating macros. + + + This addon is already installed. + + + + + An update is available for this addon. + + + + + This addon is marked as obsolete + + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. + + + This addon is marked as Python 2 Only + + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. @@ -346,6 +356,16 @@ Caching macro code... + + + Retrieving package metadata... + + + + + Failed to execute pip. Returned error was: + + Retrieving description... @@ -366,46 +386,6 @@ Python Markdown library is missing. - - - This addon is already installed. - - - - - An update is available for this addon. - - - - - Outdated GitPython detected, consider upgrading with pip. - - - - - This addon is marked as obsolete - - - - - This addon is marked as Python 2 Only - - - - - Retrieving macro description... - - - - - Retrieving info from git - - - - - Retrieving info from wiki - - GitPython not found. Using standard download instead. @@ -421,6 +401,11 @@ User requested updating a Python 2 workbench on a system running Python 3 - + + + Outdated GitPython detected, consider upgrading with pip. + + Workbench successfully updated. Please restart FreeCAD to apply the changes. @@ -466,16 +451,6 @@ Please install the missing components first. - - - Error updating module - - - - - Please fix manually - - Error: Unable to locate zip from @@ -492,13 +467,33 @@ - - Failed to execute pip. Returned error was: + + Retrieving macro description... - - Retrieving package metadata... + + Retrieving info from git + + + + + Retrieving info from wiki + + + + + Error updating module + + + + + Please fix manually + + + + + Error: Unable to locate ZIP from @@ -516,6 +511,21 @@ Clone directory + + + Error with encrypted connection + + + + + Failed to connect to + + + + + Failed to connect to URL + + Checking connection @@ -531,6 +541,16 @@ Connection failed + + + Missing dependency + + + + + Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + + Starting up... @@ -566,16 +586,6 @@ Updating cache... - - - Checking for updates... - - - - - Apply - - The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! @@ -591,6 +601,16 @@ You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + Checking for updates... + + + + + Apply + + Addon Manager: Skipping update check because AutoCheck user preference is False @@ -651,6 +671,11 @@ Failed packages: + + + Too many to list + + Missing Requirement @@ -661,6 +686,26 @@ Installing dependencies + + + Cannot execute Python + + + + + Cannot execute pip + + + + + Package installation failed + + + + + See Report View for detailed failure log. + + Installation of macro failed @@ -696,6 +741,16 @@ Installation failed + + + Confirm remove + + + + + Are you sure you want to uninstall this Addon? + + Macro could not be removed. diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index d8329fb60c..739e659b8c 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -323,6 +323,16 @@ When true, the fence will be colored like the original post and section. + + + The axes this system is made of + + + + + The placement of this axis system + + A description for this material @@ -1828,16 +1838,6 @@ A transformation to apply to each label - - - The axes this system is made of - - - - - The placement of this axis system - - The length of this element @@ -2324,6 +2324,26 @@ Building creation aborted. Door + + + Only axes must be selected + + + + + Create Axis System + + + + + Please select at least one axis + + + + + Axis system components + + Successfully written @@ -3069,11 +3089,6 @@ Building creation aborted. Please select a base face on a structural object - - - Arch - - Structure tools @@ -3089,6 +3104,11 @@ Building creation aborted. Panel tools + + + Rebar tools + + Material tools @@ -3100,8 +3120,8 @@ Building creation aborted. - - Rebar tools + + Arch @@ -3109,16 +3129,6 @@ Building creation aborted. &Arch - - - Utilities - - - - - &Draft - - Creation @@ -3134,6 +3144,96 @@ Building creation aborted. Modification + + + &Draft + + + + + Utilities + + + + + Create Grid + + + + + Auto height is larger than height + + + + + Total row size is larger than height + + + + + Auto width is larger than width + + + + + Total column size is larger than width + + + + + Grid + + + + + Total width + + + + + Total height + + + + + Add row + + + + + Del row + + + + + Add col + + + + + Del col + + + + + Create span + + + + + Remove span + + + + + Rows + + + + + Columns + + Curtain Wall @@ -3606,26 +3706,6 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Axis - - - Only axes must be selected - - - - - Create Axis System - - - - - Please select at least one axis - - - - - Create Grid - - Distances (mm) and angles (deg) between axes @@ -3651,86 +3731,6 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Label - - - Axis system components - - - - - Auto height is larger than height - - - - - Total row size is larger than height - - - - - Auto width is larger than width - - - - - Total column size is larger than width - - - - - Grid - - - - - Total width - - - - - Total height - - - - - Add row - - - - - Del row - - - - - Add col - - - - - Del col - - - - - Create span - - - - - Remove span - - - - - Rows - - - - - Columns - - pycollada not found, collada support is disabled. @@ -4150,6 +4150,16 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_Grid + + + Grid + + + + + Creates a customizable grid object + + The number of rows @@ -4325,6 +4335,11 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Panel Cut + + + Creates 2D views of selected panels + + Arch_Panel_Sheet @@ -4369,6 +4384,11 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Connector + + + Creates a connector between 2 or 3 selected pipes + + Arch_PipeTools @@ -4417,6 +4437,19 @@ If Run = 0 then the run is calculated so that the height is the same as the rela + + Arch_RebarTools + + + Rebar tools + + + + + Create various types of rebars, including U-shaped, L-shaped, and stirrup + + + Arch_Reference @@ -4560,6 +4593,19 @@ If Run = 0 then the run is calculated so that the height is the same as the rela + + Arch_StructuralSystem + + + Structural System + + + + + Create a structural system object from a selected structure and axis + + + Arch_Structure @@ -4598,6 +4644,27 @@ If Run = 0 then the run is calculated so that the height is the same as the rela + + Arch_StructureTools + + + Structure tools + + + + + Arch_StructuresFromSelection + + + Multiple Structures + + + + + Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + + + Arch_Survey @@ -4711,11 +4778,86 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Workbench + + + Structure tools + + + + + Axis tools + + + + + Panel tools + + + + + Material tools + + + + + Pipe tools + + + + + Rebar tools + + Arch tools + + + Draft creation tools + + + + + Draft annotation tools + + + + + Draft modification tools + + + + + &Arch + + + + + Utilities + + + + + &Draft + + + + + Creation + + + + + Annotation + + + + + Modification + + arch diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index d300026621..60114c0b25 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -635,6 +635,11 @@ This property is read-only, as the number depends on the points contained within Area of this object + + + The shape of this object + + The base object used by this object @@ -660,11 +665,6 @@ This property is read-only, as the number depends on the points contained within The pattern rotation used by this object - - - The shape of this object - - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) @@ -1113,46 +1113,11 @@ beyond the dimension line Writing objects shown/hidden state - - - Draft creation tools - - - - - Draft annotation tools - - - - - Draft modification tools - - Draft utility tools - - - &Drafting - - - - - &Annotation - - - - - &Modification - - - - - &Utilities - - Draft @@ -1188,21 +1153,6 @@ beyond the dimension line Toggles Constrain to Working Plane On/Off - - - Arc tools - - - - - Bezier tools - - - - - Array tools - - True @@ -1280,19 +1230,6 @@ from menu Tools -> Addon Manager Slope - - - Circular array - - - - - Creates copies of the selected object, and places the copies in a radial pattern -creating various circular layers. - -The array can be turned into an orthogonal or a polar array by changing its type. - - Save style @@ -1318,42 +1255,11 @@ The array can be turned into an orthogonal or a polar array by changing its type Error: json module not found. Unable to save style - - - Polar array - - - - - Creates copies of the selected object, and places the copies in a polar pattern -defined by a center of rotation and its angle. - -The array can be turned into an orthogonal or a circular array by changing its type. - - You must choose a base object before using this command - - - Create various types of arrays, including rectangular, polar, circular, path, and point - - - - - Array - - - - - Creates copies of the selected object, and places the copies in an orthogonal pattern, -meaning the copies follow the specified direction in the X, Y, Z axes. - -The array can be turned into a polar or a circular array by changing its type. - - Fillet @@ -1379,6 +1285,100 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + + + Arc tools + + + + + Bezier tools + + + + + Draft creation tools + + + + + Draft annotation tools + + + + + Draft modification tools + + + + + &Drafting + + + + + &Annotation + + + + + &Modification + + + + + &Utilities + + + + + Array tools + + + + + Create various types of arrays, including rectangular, polar, circular, path, and point + + + + + Circular array + + + + + Creates copies of the selected object, and places the copies in a radial pattern +creating various circular layers. + +The array can be turned into an orthogonal or a polar array by changing its type. + + + + + Polar array + + + + + Creates copies of the selected object, and places the copies in a polar pattern +defined by a center of rotation and its angle. + +The array can be turned into an orthogonal or a circular array by changing its type. + + + + + Array + + + + + Creates copies of the selected object, and places the copies in an orthogonal pattern, +meaning the copies follow the specified direction in the X, Y, Z axes. + +The array can be turned into a polar or a circular array by changing its type. + + Unable to insert new object into a scaled part @@ -1462,6 +1462,11 @@ Create a group first to use this tool. Annotation styles... + + + Manage or create annotation styles + + Draft_ApplyStyle @@ -1503,6 +1508,20 @@ CTRL to snap, SHIFT to constrain. + + Draft_Arc_3Points + + + Arc by 3 points + + + + + Creates a circular arc by picking 3 points. +CTRL to snap, SHIFT to constrain. + + + Draft_Array @@ -1518,6 +1537,27 @@ Once the array is created its type can be changed to polar or circular, and its properties can be modified. + + + Creates copies of the selected object, and places the copies in an orthogonal pattern, +meaning the copies follow the specified direction in the X, Y, Z axes. + +The array can be turned into a polar or a circular array by changing its type. + + + + + Draft_ArrayTools + + + Array tools + + + + + Create various types of arrays, including rectangular, polar, circular, path, and point + + Draft_AutoGroup @@ -1586,6 +1626,22 @@ CTRL to snap, ALT to select tangent objects. + + Draft_CircularArray + + + Circular array + + + + + Creates copies of the selected object, and places the copies in a radial pattern +creating various circular layers. + +The array can be turned into an orthogonal or a polar array by changing its type. + + + Draft_Clone @@ -1738,6 +1794,19 @@ on supported nodes and on supported objects. + + Draft_Fillet + + + Fillet + + + + + Creates a fillet between two selected wires or edges. + + + Draft_FlipDimension @@ -2008,6 +2077,22 @@ A 'Point link array' is more efficient when handling many copies. + + Draft_PolarArray + + + Polar array + + + + + Creates copies of the selected object, and places the copies in a polar pattern +defined by a center of rotation and its angle. + +The array can be turned into an orthogonal or a circular array by changing its type. + + + Draft_Polygon @@ -2172,19 +2257,6 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - - Draft_Snap - - - Toggles Grid On/Off - - - - - Toggle Draft Grid - - - Draft_Snap_Angle @@ -2597,6 +2669,61 @@ Then you can use it to save a different camera position and objects' states Workbench + + + Draft creation tools + + + + + Draft annotation tools + + + + + Draft modification tools + + + + + Draft utility tools + + + + + &Drafting + + + + + &Annotation + + + + + &Modification + + + + + &Utilities + + + + + Arc tools + + + + + Bezier tools + + + + + Array tools + + Draft Snap @@ -3842,16 +3969,31 @@ Not available if Draft preference option 'Use Part Primitives' is enab custom + + + Unable to convert input into a scale factor + + Unable to convert input into a scale factor + + + Set custom scale + + Set custom annotation scale in format x:x, x=x + + + Set the scale used by draft annotation tools + + Solids: @@ -3937,6 +4079,86 @@ Not available if Draft preference option 'Use Part Primitives' is enab This function will be deprecated. + + + Snap Lock + + + + + Snap Endpoint + + + + + Snap Midpoint + + + + + Snap Center + + + + + Snap Angle + + + + + Snap Intersection + + + + + Snap Perpendicular + + + + + Snap Extension + + + + + Snap Parallel + + + + + Snap Special + + + + + Snap Near + + + + + Snap Ortho + + + + + Snap Grid + + + + + Snap WorkingPlane + + + + + Snap Dimensions + + + + + Toggle Draft Grid + + No graphical interface @@ -4559,6 +4781,16 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick new distance from base point + + + (ON) + + + + + (OFF) + + Create 2D view @@ -5089,6 +5321,19 @@ The final angle will be the base angle plus this amount. + + Draft_Snap + + + Toggles Grid On/Off + + + + + Toggle Draft Grid + + + Draft_CloseLine diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index e2a9dd3a06..d0eceb6f72 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -213,6 +213,11 @@ The Z height of the hop + + + Stop processing + + X offset between tool and probe @@ -238,6 +243,31 @@ The output location for the probe data to be written + + + Additional base objects to be engraved + + + + + The deflection value for discretizing arcs + + + + + Vcarve Tolerance + + + + + The input mapping axis + + + + + The radius of the wrapped axis + + Calculate roll-on to path @@ -263,6 +293,21 @@ Length or Radius of the approach + + + The Style of motion into the Path + + + + + The Style of motion out of the Path + + + + + The Mode of Point Radiusoffset or Center + + Extends LeadIn distance @@ -293,6 +338,31 @@ Make False, to prevent operation from generating code + + + Shape for bit shape + + + + + The parametrized body representing the tool bit + + + + + The file of the tool + + + + + The name of the shape file + + + + + List of all properties inherited from the bit + + The gcode to be inserted @@ -378,6 +448,11 @@ Ignore outer waterlines above this height. + + + Uses the outline of the base geometry. + + The base object this collision refers to @@ -448,21 +523,6 @@ The custom start point for the path of this operation - - - Use adaptive algorithm to eliminate excessive air milling above planar pocket top. - - - - - Use adaptive algorithm to eliminate excessive air milling below planar pocket bottom. - - - - - Process the model and stock in an operation with no Base Geometry selected. - - Comment or note for CNC program @@ -508,16 +568,6 @@ Expression used for StepDown of new operations. - - - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - - - - - Extra offset to apply to the operation. Direction is operation dependent. - - Start pocketing at center or boundary @@ -528,6 +578,16 @@ Percent of cutter diameter to step over on each pass + + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + + + + + Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern @@ -618,6 +678,91 @@ Seed value for jitter randomness + + + The point file from the surface probing. + + + + + Deflection distance for arc interpolation + + + + + Set thread orientation + + + + + Currently only internal + + + + + Defines which standard thread was chosen + + + + + Set thread's major diameter + + + + + Set thread's minor diameter + + + + + Set thread's pitch - used for metric threads + + + + + Set how many passes are used to cut the thread + + + + + Direction of thread cutting operation + + + + + Operation to clear the inside of the thread + + + + + The desired width of the chamfer + + + + + The additional depth of the tool path + + + + + How to join chamfer segments + + + + + Direction of Operation + + + + + Side of Operation + + + + + Select the segment, there the operations starts + + The base object this stock is derived from @@ -658,6 +803,61 @@ Internal representation of stock type + + + Split Arcs into discrete segments + + + + + The active tool + + + + + The speed of the cutting spindle in RPM + + + + + Direction of spindle rotation + + + + + Feed rate for vertical moves in Z + + + + + Feed rate for horizontal moves + + + + + Rapid rate for vertical moves in Z + + + + + Rapid rate for horizontal moves + + + + + The tool used by this controller + + + + + Start cutting from the inside or outside + + + + + Starting Radius + + Maximum distance before a miter join is truncated @@ -688,6 +888,26 @@ Make True, if using Cutter Radius Compensation + + + The vertex index to start the path from + + + + + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. + + + + + Use adaptive algorithm to eliminate excessive air milling below planar pocket bottom. + + + + + Process the model and stock in an operation with no Base Geometry selected. + + Path @@ -696,11 +916,6 @@ %s is not a Base Model object of the job %s - - - Base shape %s already in the list - - Ignoring vertex @@ -711,6 +926,11 @@ Edit + + + Base shape %s already in the list + + Issue determine drillability: {} @@ -721,11 +941,6 @@ Didn't find job %s - - - Illegal arc: Start and end radii not equal - - Legacy Tools not supported @@ -736,6 +951,11 @@ Selected tool is not a drill + + + Illegal arc: Start and end radii not equal + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -746,11 +966,6 @@ Cutting Edge Angle (%.2f) results in negative tool tip length - - - Choose a writable location for your toolbits - - No parent job found for operation. @@ -806,36 +1021,26 @@ Profile entire model, selected face(s) or selected edge(s) - - - A planar adaptive start is unavailable. The non-planar will be attempted. - - - - - The non-planar adaptive start is also unavailable. - - Invalid Filename + + + CW + + + + + CCW + + List of disabled features - - - Engraving Operations - - - - - 3D Operations - - Project Setup @@ -871,6 +1076,16 @@ Path Dressup + + + Engraving Operations + + + + + 3D Operations + + Supplemental Commands @@ -886,6 +1101,21 @@ Utils + + + Choose a writable location for your toolbits + + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + + The non-planar adaptive start is also unavailable. + + Heights @@ -989,6 +1219,16 @@ Select the segment, there the operations starts + + + Round + + + + + Miter + + Deburr @@ -1008,29 +1248,6 @@ - - PathEngrave - - - Engrave - - - - - Creates an Engraving Path around a Draft ShapeString - - - - - Additional base objects to be engraved - - - - - The vertex index to start the path from - - - PathFeatureExtensions @@ -1107,37 +1324,14 @@ PathGui - - - Cannot find property %s of %s - - %s has no property %s (%s)) - - - PathHelix - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - - - - - Start cutting from the inside or outside - - - - - Radius increment (must be smaller than tool diameter) - - - - - Starting Radius + + Cannot find property %s of %s @@ -1198,6 +1392,11 @@ Solid object to be used as stock. + + + Select the Type of Job + + Split output into multiple gcode files @@ -1503,16 +1702,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Y - - - Pocket does not support shape %s.%s - - - - - Vertical faces do not form a loop - ignoring - - Pass Extension @@ -1523,6 +1712,16 @@ If it is necessary to set the FinalDepth manually please select a different oper The distance the facing operation will extend beyond the boundary shape. + + + Pocket does not support shape %s.%s + + + + + Vertical faces do not form a loop - ignoring + + Choose how to process multiple Base Geometry features. @@ -1559,6 +1758,21 @@ If it is necessary to set the FinalDepth manually please select a different oper PathProfile + + + Outside + + + + + Inside + + + + + CW + + New property added to @@ -1569,11 +1783,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Check its default value. - - - CW - - CCW @@ -1604,16 +1813,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Miter - - - Outside - - - - - Inside - - Unable to create path for face(s). @@ -2070,76 +2269,28 @@ If it is necessary to set the FinalDepth manually please select a different oper - - PathThreadMilling - - - Thread Milling - - - - - Creates a Path Thread Milling operation from features of a base object - - - - - Set thread orientation - - - - - Currently only internal - - - - - Defines which standard thread was chosen - - - - - Set thread's major diameter - - - - - Set thread's minor diameter - - - - - Set thread's pitch - used for metric threads - - - - - Set thread's TPI (turns per inch) - used for imperial threads - - - - - Set how many passes are used to cut the thread - - - - - Direction of thread cutting operation - - - - - Set to True to get lead in and lead out arcs at the start and end of the thread cut - - - - - Operation to clear the inside of the thread - - - PathToolBit + + + Toolbit cannot be edited: Shapefile not found + + + + + Edit ToolBit + + + + + Uncreate ToolBit + + + + + Create ToolBit + + Shape for bit shape @@ -2165,26 +2316,6 @@ If it is necessary to set the FinalDepth manually please select a different oper List of all properties inherited from the bit - - - Toolbit cannot be edited: Shapefile not found - - - - - Edit ToolBit - - - - - Uncreate ToolBit - - - - - Create ToolBit - - Create Tool @@ -2221,99 +2352,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - PathToolBitLibrary - - - ToolBit Dock - - - - - Toggle the Toolbit Dock - - - - - ToolBit Library editor - - - - - Open an editor to manage ToolBit libraries - - - - - PathToolController - - - Error updating TC: %s - - - - - The active tool - - - - - The speed of the cutting spindle in RPM - - - - - Direction of spindle rotation - - - - - Feed rate for vertical moves in Z - - - - - Feed rate for horizontal moves - - - - - Rapid rate for vertical moves in Z - - - - - Rapid rate for horizontal moves - - - - - Unsupported PathToolController template version %s - - - - - PathToolController template has no version - corrupted template file? - - - - - The tool used by this controller - - - PathToolLibraryManager - - - Tooltable JSON (*.fctl) - - - - - LinuxCNC tooltable (*.tbl) - - Tooltable JSON (*.json) @@ -2329,6 +2369,11 @@ If it is necessary to set the FinalDepth manually please select a different oper HeeksCAD tooltable (*.tooltable) + + + LinuxCNC tooltable (*.tbl) + + Tool Table Same Name @@ -2349,33 +2394,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Unsupported Path tooltable - - - PathVcarve - - Additional base objects to be engraved - - - - - The deflection value for discretizing arcs - - - - - Cutoff for removing colinear segments (degrees). - default=10.0. - - - - - The Job Base Object has no engraveable element. Engraving operation will produce no output. - - - - - Error processing Base object. Engraving operation will produce no output. + + Tooltable JSON (*.fctl) @@ -2447,8 +2468,36 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_3dTools + + + 3D Operations + + + Path_Adaptive + + + Outside + + + + + Inside + + + + + Clearing + + + + + Profiling + + Adaptive @@ -2527,6 +2576,19 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_Deburr + + + Deburr + + + + + Creates a Deburr Path along Edges or around Faces + + + Path_Dressup @@ -2549,11 +2611,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupAxisMap - - - The base path to modify - - The input mapping axis @@ -2579,6 +2636,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up + + + The base path to modify + + Path_DressupDogbone @@ -2683,6 +2745,21 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupLeadInOut + + + Arc + + + + + Tangent + + + + + Perpendicular + + The Style of LeadIn the Path @@ -2698,6 +2775,21 @@ If it is necessary to set the FinalDepth manually please select a different oper The Mode of Point Radiusoffset or Center + + + Radius + + + + + Center + + + + + Length/Radius positive not Null + + Edit LeadInOut Dress-up @@ -2713,6 +2805,21 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + Please select one path object + + + + + The selected object is not a path + + + + + Please select a Profile object + + Path_DressupPathBoundary @@ -2927,15 +3034,32 @@ If it is necessary to set the FinalDepth manually please select a different oper - Path_DressupZCorrectp + Path_Drilling - - break segments into smaller segments of this length. + + G99 + + + + + G98 + + + + + None + + + + + Drill Tip + + + + + 2x Drill Tip - - - Path_Drilling Drilling @@ -2948,15 +3072,23 @@ If it is necessary to set the FinalDepth manually please select a different oper - Path_Face + Path_Engrave - - Face + + Engrave - - Create a Facing Operation from a model or face + + Creates an Engraving Path around a Draft ShapeString + + + + + Path_EngraveTools + + + Engraving Operations @@ -2972,6 +3104,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Helix object from a features of a base object + + + CW + + + + + CCW + + Path_Hop @@ -3077,6 +3219,19 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_MillFace + + + Face + + + + + Create a Facing Operation from a model or face + + + Path_OpActiveToggle @@ -3095,6 +3250,91 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Pocket + + + Boundbox + + + + + Face Region + + + + + Perimeter + + + + + Stock + + + + + Collectively + + + + + Individually + + + + + Climb + + + + + Conventional + + + + + Center + + + + + Edge + + + + + ZigZag + + + + + Offset + + + + + Spiral + + + + + ZigZagOffset + + + + + Line + + + + + Grid + + + + + Triangle + + 3D Pocket @@ -3116,6 +3356,32 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_Pocket3D + + + 3D Pocket + + + + + Creates a Path 3D Pocket object from a face or faces + + + + + Path_Pocket_Shape + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + + Path_Post @@ -3159,6 +3425,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Select Output File + + + Probe + + + + + Create a Probing Grid from a job stock + + Path_Profile @@ -3494,6 +3770,145 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_ThreadMilling + + + Thread Milling + + + + + Custom + + + + + Metric Internal + + + + + Imperial Internal + + + + + LeftHand + + + + + RightHand + + + + + Climb + + + + + Conventional + + + + + Path_ToolBit + + + Choose a writable location for your toolbits + + + + + Tooltable JSON (*.fctl) + + + + + Save toolbit library + + + + + LinuxCNC tooltable (*.tbl) + + + + + Path_ToolBitCreate + + + Create Tool + + + + + Creates a new ToolBit object + + + + + Path_ToolBitDock + + + ToolBit Dock + + + + + Toggle the Toolbit Dock + + + + + Path_ToolBitLibraryOpen + + + ToolBit Library editor + + + + + Open an editor to manage ToolBit libraries + + + + + Path_ToolBitLoad + + + Load Tool + + + + + Load an existing ToolBit object from a file + + + + + Path_ToolBitSave + + + Save Tool + + + + + Save an existing ToolBit object to a file + + + + + Path_ToolBitSaveAs + + + Save Tool as... + + + Path_ToolController @@ -3506,9 +3921,54 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller + + + Forward + + + + + Reverse + + Path_ToolTable + + + Open tooltable + + + + + Save tooltable + + + + + Rename Tooltable + + + + + Enter Name: + + + + + Add New Tool Table + + + + + Delete Selected Tool Table + + + + + Rename Selected Tool Table + + Tool Manager @@ -3551,6 +4011,251 @@ If it is necessary to set the FinalDepth manually please select a different oper + + PathEngrave + + + Engrave + + + + + Creates an Engraving Path around a Draft ShapeString + + + + + Additional base objects to be engraved + + + + + The vertex index to start the path from + + + + + PathHelix + + + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + + + + + Start cutting from the inside or outside + + + + + Radius increment (must be smaller than tool diameter) + + + + + Starting Radius + + + + + PathThreadMilling + + + Thread Milling + + + + + Creates a Path Thread Milling operation from features of a base object + + + + + Set thread orientation + + + + + Currently only internal + + + + + Defines which standard thread was chosen + + + + + Set thread's major diameter + + + + + Set thread's minor diameter + + + + + Set thread's pitch - used for metric threads + + + + + Set thread's TPI (turns per inch) - used for imperial threads + + + + + Set how many passes are used to cut the thread + + + + + Direction of thread cutting operation + + + + + Set to True to get lead in and lead out arcs at the start and end of the thread cut + + + + + Operation to clear the inside of the thread + + + + + PathToolBitLibrary + + + ToolBit Dock + + + + + Toggle the Toolbit Dock + + + + + ToolBit Library editor + + + + + Open an editor to manage ToolBit libraries + + + + + PathToolController + + + Error updating TC: %s + + + + + The active tool + + + + + The speed of the cutting spindle in RPM + + + + + Direction of spindle rotation + + + + + Feed rate for vertical moves in Z + + + + + Feed rate for horizontal moves + + + + + Rapid rate for vertical moves in Z + + + + + Rapid rate for horizontal moves + + + + + Unsupported PathToolController template version %s + + + + + PathToolController template has no version - corrupted template file? + + + + + The tool used by this controller + + + + + PathVcarve + + + Additional base objects to be engraved + + + + + The deflection value for discretizing arcs + + + + + Cutoff for removing colinear segments (degrees). + default=10.0. + + + + + The Job Base Object has no engraveable element. Engraving operation will produce no output. + + + + + Error processing Base object. Engraving operation will produce no output. + + + + + Path_DressupZCorrectp + + + break segments into smaller segments of this length. + + + + + Path_Face + + + Face + + + + + Create a Facing Operation from a model or face + + + Probe diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 4e19ac2cb4..e49f16882f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -1,6 +1,92 @@ + + CopyView + + + Copy View + + + + + Copy a View to a second Page + + + + + Copy View to a second Page + + + + + Select View to copy from list. + + + + + Select View + + + + + Select From Page. + + + + + Select Page + + + + + Select To Page. + + + + + MoveView + + + Move View + + + + + Move a View to a new Page + + + + + Move View to a different Page + + + + + Select View to move from list. + + + + + Select View + + + + + Select From Page. + + + + + Select Page + + + + + Select To Page. + + + Cmd2LineCenterLine