diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 5537f36638..41642fa082 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -170,7 +170,7 @@ - + Align @@ -485,12 +485,12 @@ Gui::AlignmentView - + Movable object - + Fixed object @@ -853,7 +853,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CommandModel - + Commands @@ -1552,27 +1552,27 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomizeSpaceball - + Spaceball Buttons - + No Spaceball Present - + Buttons - + Reset - + Print Reference @@ -3043,12 +3043,12 @@ Specify another directory, please. - + Reset - + Clear @@ -6009,12 +6009,12 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::PrintModel - + Button - + Command @@ -6560,13 +6560,13 @@ Do you want to save your changes? Gui::FileChooser - - + + Select a file - + Select a directory @@ -6574,13 +6574,13 @@ Do you want to save your changes? Gui::FileDialog - + Save as - - + + Open @@ -6588,12 +6588,12 @@ Do you want to save your changes? Gui::FileOptionsDialog - + Extended - + All files (*.*) @@ -6727,12 +6727,12 @@ Do you want to save your changes? Gui::InputField - + Edit - + Save value @@ -6763,7 +6763,7 @@ Do you want to save your changes? Gui::LabelEditor - + List @@ -6945,96 +6945,96 @@ Do you want to save the document now? Gui::ManualAlignment - - - - - + + + + + Manual alignment - + The alignment is already in progress. - + Alignment[*] - + Please, select at least one point in the left and the right view - + Please, select at least %1 points in the left and the right view - + Please pick points in the left and right view - + The alignment has finished - + The alignment has been canceled - - + + Too few points picked in the left view. At least %1 points are needed. - - + + Too few points picked in the right view. At least %1 points are needed. - + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - + Try to align group of views - + The alignment failed. How do you want to proceed? - + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - + Point picked at (%1,%2,%3) - + No point was found on model - + No point was picked @@ -7163,17 +7163,17 @@ How do you want to proceed? Gui::ProgressDialog - + Remaining: %1 - + Aborting - + Do you really want to abort the operation? @@ -7202,48 +7202,48 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit - + property - + Auto expand - + Show all - + Expression... - + Add property - - + + Rename property group - + Remove property - + Group name: @@ -7496,17 +7496,17 @@ Do you want to exit without saving your data? Gui::SelectModule - + Select module - + Open %1 as - + Select @@ -8028,7 +8028,7 @@ Do you want to specify another directory? Gui::TreeDockWidget - + Tree view @@ -8036,7 +8036,7 @@ Do you want to specify another directory? Gui::TreePanel - + Search @@ -8054,163 +8054,163 @@ Do you want to specify another directory? - + Activate document - + Activate document %1 - + Group - + Labels & Attributes - + Description - + Application - + Show hidden items - + Show hidden tree view items - + Hide item - + Hide the item in tree - + Create group... - + Create a group - - + + Rename - + Rename object - + Finish editing - + Finish editing object - + Add dependent objects to selection - + Adds all dependent objects to the selection - + Close document - + Close the document - + Reload document - + Reload a partially loaded document - + Skip recomputes - + Enable or disable recomputations of document - + Allow partial recomputes - + Enable or disable recomputating editing object when 'skip recomputation' is enabled - + Mark to recompute - + Mark this object to be recomputed - + Recompute object - + Recompute the selected object - + (but must be executed) - + %1, Internal name: %2 @@ -8412,14 +8412,14 @@ Do you want to specify another directory? PropertyListDialog - - + + Invalid input - - + + Input in line %1 is not a number @@ -8575,7 +8575,7 @@ Do you want to specify another directory? - + Unsaved document @@ -9290,8 +9290,8 @@ underscore, and must not start with a digit. - - + + Drag & drop failed diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index 5833f08ae1..0bbd61937c 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -664,17 +664,6 @@ installed addons will be checked for available updates Disable git (fall back to ZIP downloads only) - - - disableGit - - - - - - Addons - - Activate Addon Manager options intended for developers of new Addons. @@ -685,11 +674,6 @@ installed addons will be checked for available updates Addon developer mode - - - developerMode - - PackageDetails @@ -1174,94 +1158,94 @@ installed addons will be checked for available updates - + Starting up... - + Loading addon information - + Worker process {} is taking a long time to stop... - + Previous cache process was interrupted, restarting... - + Custom repo list changed, forcing recache... - + Addon manager - + You must restart FreeCAD for changes to take effect. - + Restart now - + Restart later - - + + Refresh local cache - + Updating cache... - + Could not find addon '{}' to select - - + + Checking for updates... - + Apply {} update(s) - + No updates available - - - + + + Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. @@ -1338,37 +1322,37 @@ installed addons will be checked for available updates - + Confirm remove - + Are you sure you want to uninstall {}? - + Removing Addon - + Removing {} - + Uninstall complete - + Uninstall failed @@ -1489,7 +1473,7 @@ installed addons will be checked for available updates - + Success @@ -1601,12 +1585,12 @@ installed addons will be checked for available updates - + Received {} response code from server - + Failed to install macro {} @@ -1684,18 +1668,18 @@ installed addons will be checked for available updates - + This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: - + Too many to list - - + + @@ -1704,141 +1688,136 @@ installed addons will be checked for available updates - - The following Python packages are allowed to be automatically installed - - - - + Addon '{}' requires '{}', which is not available in your copy of FreeCAD. - + Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: - + Press OK to install anyway. - + Incompatible Python version - + This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. - + Optional dependency on {} ignored because it is not in the allow-list - - + + Installing dependencies - + Cannot execute Python - + Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. - + Dependencies could not be installed. Continue with installation of {} anyway? - + Cannot execute pip - + Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: - - + + Continue with installation of {} anyway? - + Package installation failed - + See Report View for detailed failure log. - + Installing Addon - + Installing FreeCAD Addon '{}' - + Cancelling - + Cancelling installation of '{}' - + {} was installed successfully - + Installation Failed - + Failed to install {} - + Create new toolbar - + A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' @@ -2447,6 +2426,16 @@ installed addons will be checked for available updates Failed + + + Update was cancelled + + + + + some addons may have been updated + + Std_AddonMgr @@ -2464,12 +2453,12 @@ installed addons will be checked for available updates AddonInstaller - + Finished removing {} - + Failed to remove some files @@ -2477,7 +2466,7 @@ installed addons will be checked for available updates Addons installer - + Finished updating the following addons diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index f6592744b4..c109551289 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -1761,7 +1761,7 @@ unit to work with when opening the file. - + Length @@ -1769,14 +1769,14 @@ unit to work with when opening the file. - + Width - + Height @@ -1977,6 +1977,42 @@ unit to work with when opening the file. Create BuildingPart + + + Deactivate + + + + + Activate + + + + + Set working plane + + + + + Write camera position + + + + + Create group... + + + + + + Reorder children alphabetically + + + + + Clone level up + + @@ -2000,12 +2036,12 @@ unit to work with when opening the file. - + Profile - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. @@ -2016,14 +2052,14 @@ Note: You can change that in the preferences. - + There is no valid object in the selection. Site creation aborted. - + Create Site @@ -2041,18 +2077,18 @@ Site creation aborted. - + Please select a base object - + Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2067,37 +2103,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Id - + Angle (deg) - + Run (mm) - + IdRel - + Thickness (mm) - + Overhang (mm) - + Height (mm) @@ -2137,7 +2173,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + + Reload reference + + + + + Open reference + + + + Create external reference @@ -2262,158 +2308,171 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + This window has no defined opening - - - + + + Get selected edge - + Unable to create component - + Window elements - + Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick selected - - - - - - + + + + + + Remove - - - - - + + + + + Add - + + + + + + + + + + + + Edit - + Create/update component - + Base 2D object - - + + Wires - - + + Components - + Create new component - - - + + + Name - - + + Type - - - + + + Thickness - - + + Offset - + Hinge - + Opening mode - - + + + default - + If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here - + Press to retrieve the selected edge - + + Invert opening direction - + + Invert hinge position @@ -2433,14 +2492,14 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - - - + + + Axes - + Axis system components @@ -2515,23 +2574,28 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - - + + Merge duplicates + + + + + Material - + New layer - + Total thickness - + depends on the object @@ -2582,187 +2646,187 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Grid - + Total width - + Total height - + Add row - + Del row - + Add col - + Del col - + Create span - + Remove span - + Rows - + Columns - + Precast elements - + Slab type - + Chamfer - + Dent length - + Dent width - + Dent height - + Slab base - + Number of holes - + Major diameter of holes - + Minor diameter of holes - + Spacing between holes - + Number of grooves - + Depth of grooves - + Height of grooves - + Spacing between grooves - + Number of risers - + Length of down floor - + Height of risers - + Depth of treads - + Precast options - + Dents list - + Add dent - + Remove dent - + Slant - + Level - + Rotation @@ -2800,17 +2864,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Tools - + Edit views positions - + This object has no face @@ -2913,45 +2977,50 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + + Attach spreadsheet + + + + Import CSV File - + Export CSV File - + Unable to recognize that file type - - + + Description - - - + + + Value - - + + Unit - + Schedule @@ -2984,27 +3053,27 @@ Floor creation aborted. - + Distances (mm) and angles (deg) between axes - + Axis - + Distance - + Angle - + Label @@ -3040,97 +3109,98 @@ Floor creation aborted. - + + Toggle subcomponents - + Closing Sketch edit - + Component - + Components of this object - + Base component - + Additions - + Subtractions - + Objects - + Fixtures - + Group - + Hosts - + Edit IFC properties - + Edit standard code - + Property - + Add property... - + Add property set... - + New... - + New property - + New property set @@ -3151,83 +3221,88 @@ Floor creation aborted. - - Section plane settings - - - - - Remove highlighted objects from the list above - - - - - Add selected - - - - - Add selected object(s) to the scope of this section plane - - - - - Objects seen by this section plane: - - - - - Section plane placement: + + Toggle Cutview - Rotate X - - - - - Rotates the plane along the X axis + Section plane settings - Rotate Y + Remove highlighted objects from the list above - Rotates the plane along the Y axis + Add selected - Rotate Z + Add selected object(s) to the scope of this section plane - Rotates the plane along the Z axis + Objects seen by this section plane: - Resize + Section plane placement: - Resizes the plane to fit the objects in the list above + Rotate X + Rotates the plane along the X axis + + + + + Rotate Y + + + + + Rotates the plane along the Y axis + + + + + Rotate Z + + + + + Rotates the plane along the Z axis + + + + + Resize + + + + + Resizes the plane to fit the objects in the list above + + + + Center - + Centers the plane on the objects in the list above @@ -3260,12 +3335,12 @@ Building creation aborted. - + Set text position - + Space boundaries @@ -3357,6 +3432,11 @@ Building creation aborted. Error: Unable to modify the base object of this wall + + + Flip direction + + Invalid cutplane @@ -3685,7 +3765,7 @@ Building creation aborted. - + A standard code (MasterFormat, OmniClass,...) @@ -3763,7 +3843,7 @@ Building creation aborted. - + The line width of this object @@ -3908,25 +3988,15 @@ Building creation aborted. - + Outside Diameter - + Wall thickness - - - - - - - - Width of the beam - - @@ -3934,203 +4004,213 @@ Building creation aborted. - Height of the beam + Width of the beam + + + + - Thickness of the web + Height of the beam + Thickness of the web + + + + + Thickness of the flanges - + Thickness of the sides - + Thickness of the webs - + Thickness of the flange - + Thickness of the legs - + The base terrain of this site - + The street and house number of this site, with postal box or apartment number if needed - + The postal or zip code of this site - + The city of this site - + The region, province or county of this site - + The country of this site - - + + The latitude of this site - + Angle between the true North and the North direction in this document - + The elevation of level 0 of this site - + A URL that shows this site in a mapping website - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane - + The perimeter length of this terrain - + The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object - + The time zone where this site is located - + An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - + Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + Show solar diagram or not - + The scale of the solar diagram - + The position of the solar diagram - + The color of the solar diagram - + When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - + The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation @@ -4340,7 +4420,7 @@ Building creation aborted. - + The number of the wire that defines the hole. A value of 0 means automatic @@ -4617,43 +4697,43 @@ Building creation aborted. - - + + A description for this material - + A URL where to find information about this material - + The transparency value of this material - + The color of this material - + The color of this material when cut - + The list of layer names - + The list of layer materials - + The list of layer thicknesses @@ -4850,13 +4930,13 @@ Building creation aborted. - + The linked object - + The line width of the rendered objects @@ -5436,90 +5516,90 @@ Building creation aborted. - + The display length of this section plane - + The display height of this section plane - + The size of the arrows of this section plane - + The transparency of this object + - Show the cut in the 3D view - + The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + Show the label in the 3D view - + The name of the font - + The size of the text font - + The rendering mode to use - + If cut geometry is shown or not - + If cut geometry is filled or not - + The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model - + The line color of the projected objects - + The color of the cut faces (if turned on) @@ -5770,7 +5850,7 @@ Building creation aborted. Draft - + Writing camera position @@ -5912,12 +5992,12 @@ Building creation aborted. Arch_Site - + Site - + Creates a site object including selected objects. @@ -5964,12 +6044,12 @@ Building creation aborted. Arch_Reference - + External reference - + Creates an external reference object @@ -6107,8 +6187,8 @@ Building creation aborted. Arch_MaterialTools - - + + Material tools @@ -6228,12 +6308,12 @@ Building creation aborted. Arch_Nest - + Nest - + Nests a series of selected shapes in a container @@ -6241,8 +6321,8 @@ Building creation aborted. Arch_PanelTools - - + + Panel tools @@ -6337,8 +6417,8 @@ Building creation aborted. Arch_AxisTools - - + + Axis tools @@ -6590,4 +6670,14 @@ Building creation aborted. + + Command + + + + + Transform + + + diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index d6f30134bb..bc8f1faf0f 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -969,6 +969,7 @@ value by using the [ and ] keys while drawing + Annotations @@ -1097,11 +1098,6 @@ value by using the [ and ] keys while drawing Selected - - - Texts/dims - - Hatch @@ -1510,12 +1506,12 @@ such as "Arial:Bold" - text above (2D) + World - text inside (3D) + Screen @@ -3253,7 +3249,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + @@ -3274,7 +3270,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + @@ -3311,22 +3307,22 @@ To enabled FreeCAD to download these libraries, answer Yes. - + image is Null - + filename does not exist on the system or in the resource file - + unable to load texture - + Does not have 'ViewObject.RootNode'. @@ -4606,14 +4602,18 @@ The final angle will be the base angle plus this amount. - - + added view property 'ScaleMultiplier' - - + + added view property 'AnnotationStyle' + + + + + migrated 'DraftText' type to 'Text' @@ -5060,14 +5060,14 @@ The final angle will be the base angle plus this amount. - - + + Edit - + Flatten @@ -5230,10 +5230,25 @@ The final angle will be the base angle plus this amount. - + Text + + + updated view property 'TextFont' to 'FontName' + + + + + updated view property 'TextSize' to 'FontSize' + + + + + added view property 'TextColor' + + Workbench @@ -5341,27 +5356,27 @@ from menu Tools -> Addon Manager - + Save style - + Name of this new style: - + Warning - + Name exists. Overwrite? - + Error: json module not found. Unable to save style @@ -5465,6 +5480,41 @@ from menu Tools -> Addon Manager Writing objects shown/hidden state + + + Millimeters + + + + + Centimeters + + + + + Meters + + + + + Inches + + + + + Feet + + + + + Architectural + + + + + The preferred unit you are currently working with. + + importOCA @@ -6913,13 +6963,13 @@ set True for fusion or False for compound - + The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. - + Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. @@ -6927,7 +6977,7 @@ as 'Text', depending on 'Label Type'. - + The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', @@ -6940,7 +6990,7 @@ can be set as a list of arbitrary points. - + The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by @@ -6948,7 +6998,7 @@ assigning a custom list to the 'Points' attribute. - + The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn @@ -6957,17 +7007,17 @@ depending on the value of 'Straight Direction'. - + The placement of the 'Text' element in 3D space - + The text to display when 'Label Type' is set to 'Custom' - + The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', @@ -6976,7 +7026,7 @@ The 'Custom Text' is displayed only if 'Label Type' is set t - + The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. @@ -6988,16 +7038,14 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN&ap - - + General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. - - + Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. @@ -7357,17 +7405,17 @@ This property is read-only, as the number depends on the points in 'Point O - + The normal direction of the text of the dimension - + The object measured by this dimension object - + The object, and specific subelements of it, that this dimension object is measuring. @@ -7378,7 +7426,7 @@ There are various possibilities: - + A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line @@ -7390,7 +7438,7 @@ that displays the measured angle. - + Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. @@ -7398,7 +7446,7 @@ If it is a diameter dimension it will be a point that lies on the arc. - + Ending point of the dimension line. If it is a radius or diameter dimension @@ -7406,13 +7454,13 @@ it will be a point that lies on the arc. - + The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. - + The value of the measurement. This property is read-only because the value is calculated @@ -7423,25 +7471,25 @@ is the radius or diameter, depending on the 'Diameter' property. - + When measuring circular arcs, it determines whether to display the radius or the diameter value - + Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - + Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - + The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions @@ -7449,7 +7497,7 @@ intersect, resulting in the measured 'Angle' between them. - + The value of the measurement. This property is read-only because the value is calculated from @@ -7632,70 +7680,49 @@ the 'First Angle' and 'Last Angle' properties. - - - The size of the text - - - - - - The font of the text - - - - - - - The vertical alignment of the text - - - - - + Text color - - The maximum number of characters on each line of the text box - - - - - + + Line spacing (relative to font size) - - The size of the arrow + + Vertical alignment - - The type of arrow of this label + + Maximum number of characters on each line of the text box - + + + Horizontal alignment + + + + The type of frame around the text of this object - + Display a leader line or not - - + Line width - - + Line color @@ -7755,88 +7782,90 @@ the 'First Angle' and 'Last Angle' properties. - + Font name - + Font size - + Spacing between text and dimension line - + Rotate the dimension text 180 degrees - + Text Position. Leave '(0,0,0)' for automatic position - + Text override. Write '$dim' so that it is replaced by the dimension length. - + The number of decimals to show - + Show the unit suffix - + A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - + + Arrow size - + + Arrow type - + Rotate the dimension arrows 180 degrees - + The distance the dimension line is extended past the extension lines - + Length of the extension lines - + Length of the extension line beyond the dimension line - + Shows the dimension line and arrows @@ -7844,7 +7873,7 @@ beyond the dimension line Command - + Transform diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 7f4be56212..cedb491fa9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -1630,7 +1630,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintContact - + Input error @@ -1638,7 +1638,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintDisplacement - + Input error @@ -1646,7 +1646,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintFluidBoundary - + Input error @@ -1717,7 +1717,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintTemperature - + Input error @@ -1725,7 +1725,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintTransform - + Input error @@ -1819,77 +1819,77 @@ Specify another file please. FemGui::TaskFemConstraintContact - + Delete - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Selection error - + Only one face in object! - moved to master face - - + + Only one master face and one slave face for a contact constraint! - - - - + + + + Nothing selected! - - + + Only one slave face for a contact constraint! - - - - + + + + Selected object is not a part! - - + + Only faces can be picked - + Only one master for a contact constraint! - + Only one master face for a contact constraint! @@ -1897,28 +1897,28 @@ Specify another file please. FemGui::TaskFemConstraintDisplacement - - - - - + + + + + Selection error - - + + Nothing selected! - - + + Selected object is not a part! - + Only one type of selection (vertex,face or edge) per constraint allowed! @@ -1955,128 +1955,128 @@ Specify another file please. FemGui::TaskFemConstraintFluidBoundary - + Basic - + Turbulence - + Thermal - + select boundary type, faces and set value - + Intensity [0~1] - + Dissipation Rate [m2/s3] - + Length Scale[m] - + Viscosity Ratio [1] - + Hydraulic Diameter [m] - - + + Gradient [K/m] - + Flux [W/m2] - + Empty selection - + Select an edge or a face, please. - - - - - + + + + + Wrong selection - + Selected object is not a part object! - + Only one planar face or edge can be selected! - + Only planar faces can be picked for 3D - + Only planar edges can be picked for 2D - + Only faces for 3D part or edges for 2D can be picked - - - - - + + + + + Selection error - - + + Nothing selected! - - + + Selected object is not a part! - + Only one type of selection (vertex,face or edge) per constraint allowed! @@ -2294,22 +2294,22 @@ Specify another file please. FemGui::TaskFemConstraintTemperature - - - - + + + + Selection error - - + + Nothing selected! - - + + Selected object is not a part! @@ -2317,64 +2317,64 @@ Specify another file please. FemGui::TaskFemConstraintTransform - + Constraint update error - + The transformable faces have changed. Please add only the transformable faces and remove non-transformable faces! - - - - - - - - - - + + + + + + + + + + Selection error - - + + Nothing selected! - - + + Only one face for rectangular transform constraint! - - + + Selected object is not a part! - + Only one face for transform constraint! - + Only faces can be picked - + Only cylindrical faces can be picked - + Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface @@ -2398,7 +2398,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function @@ -2411,7 +2411,7 @@ Specify another file please. - + Length X-Axis plot label @@ -2420,12 +2420,12 @@ Specify another file please. FemGui::TaskPostDataAtPoint - + Data at point options - + %1 at (%2; %3; %4) is: %5 %6 @@ -2449,7 +2449,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options @@ -2457,7 +2457,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options @@ -3322,12 +3322,12 @@ Specify another file please. - + Constraint Contact - + Constraint displacement @@ -3337,7 +3337,7 @@ Specify another file please. - + Constraint fluid boundary @@ -3372,12 +3372,12 @@ Specify another file please. - + Constraint temperature - + Constraint transform diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 42a1b5392f..bf46bc0500 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -2312,7 +2312,7 @@ of projection. - + Edit attachment @@ -2327,28 +2327,28 @@ of projection. - + Edge - + Wire - - + + Face - + Shell - + Solid @@ -4672,80 +4672,80 @@ only created cuts will be visible PartGui::ShapeBuilderWidget - + Unsupported - + Box selection for shells is not supported - - - - - - - + + + + + + + Wrong selection - - + + Select two vertices - - + + Select one or more edges - + Select three or more vertices - + Select two or more faces - + Select only one part object - + Select two vertices to create an edge - + Select adjacent edges - + Select a list of vertices - + Select a closed set of edges - + Select adjacent faces - + All shape types can be selected @@ -4887,7 +4887,7 @@ only created cuts will be visible - + Attachment Offset (in local coordinates): @@ -4961,77 +4961,77 @@ of object being attached. - + OCC error: %1 - + unknown error - + Attachment mode failed: %1 - + Not attached - + Attached with mode %1 - + Attachment Offset (inactive - not attached): - + Face - + Edge - + Vertex - + Selecting... - + Reference%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: - + %1 (add %2) - + %1 (add more references) @@ -5244,7 +5244,7 @@ Individual BOP Checks: PartGui::TaskDlgAttacher - + Datum dialog: Input error diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index ad265ed969..796be4bcaf 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -889,22 +889,22 @@ so that self intersection is avoided. - + Mirrored - + Make LinearPattern - + PolarPattern - + Scaled @@ -1420,39 +1420,39 @@ If zero, it is equal to Radius2 - + Cone radii are equal - + The radii for cones must not be equal! - - - + + + Invalid wedge parameters - + X min must not be equal to X max! - + Y min must not be equal to Y max! - + Z min must not be equal to Z max! - + Create primitive @@ -2142,12 +2142,12 @@ click again to end selection - + Remove - + Error @@ -2291,52 +2291,52 @@ click again to end selection - + Remove - + Edit - + Delete - + Add mirrored transformation - + Add linear pattern - + Add polar pattern - + Add scaled transformation - + Move up - + Move down - + Right-click to add @@ -2853,12 +2853,12 @@ measured along the specified direction - + Remove - + Error @@ -2866,7 +2866,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment @@ -4419,20 +4419,20 @@ Only available for holes without thread - + Standard - - + + Close - + Wide @@ -4575,12 +4575,12 @@ over 90: larger hole radius at the bottom - + Normal - + Loose diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 079127a287..0a67924907 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -2127,12 +2127,12 @@ invalid constraints, degenerated geometry, etc. CriticalMessages - + Sketch: - + Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! @@ -2175,59 +2175,59 @@ invalid constraints, degenerated geometry, etc. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - - + + BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. - - + + The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. - + Knot cannot have zero multiplicity. - + Knot multiplicity cannot be higher than the degree of the BSpline. - + Knot cannot be inserted outside the BSpline parameter range. @@ -2474,7 +2474,7 @@ invalid constraints, degenerated geometry, etc. - + Dimensional constraint diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts index 6d9f0449c2..9dbe5184ca 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts @@ -720,109 +720,109 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 QtColorPicker + + + Black + + + - Black + White - White + Red - Red + Dark red - Dark red + Green - Green + Dark green - Dark green + Blue - Blue + Dark blue - Dark blue + Cyan - Cyan + Dark cyan - Dark cyan + Magenta - Magenta + Dark magenta - Dark magenta + Yellow - Yellow + Dark yellow - Dark yellow + Gray - Gray + Dark gray - Dark gray - - - - - Light gray - + Custom Color diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 88ee0f261b..4655273d34 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -75,12 +75,12 @@ CmdTechDraw3PtAngleDimension - + TechDraw - + Insert 3-Point Angle Dimension @@ -88,12 +88,12 @@ CmdTechDrawActiveView - + TechDraw - + Insert Active View (3D View) @@ -101,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw - + Insert Angle Dimension @@ -127,17 +127,17 @@ CmdTechDrawArchView - + TechDraw - + Insert Arch Workbench Object - + Insert a View of a Section Plane from Arch Workbench @@ -145,12 +145,12 @@ CmdTechDrawBalloon - + TechDraw - + Insert Balloon Annotation @@ -176,12 +176,12 @@ CmdTechDrawClipGroup - + TechDraw - + Insert Clip Group @@ -189,12 +189,12 @@ CmdTechDrawClipGroupAdd - + TechDraw - + Add View to Clip Group @@ -202,12 +202,12 @@ CmdTechDrawClipGroupRemove - + TechDraw - + Remove View from Clip Group @@ -215,17 +215,17 @@ CmdTechDrawComplexSection - + TechDraw - + Insert Complex Section - + Insert a Complex Section @@ -295,12 +295,12 @@ CmdTechDrawDetailView - + TechDraw - + Insert Detail View @@ -308,12 +308,12 @@ CmdTechDrawDiameterDimension - + TechDraw - + Insert Diameter Dimension @@ -321,12 +321,12 @@ CmdTechDrawDimension - + TechDraw - + Insert Dimension @@ -334,17 +334,17 @@ CmdTechDrawDraftView - + TechDraw - + Insert Draft Workbench Object - + Insert a View of a Draft Workbench object @@ -352,22 +352,22 @@ CmdTechDrawExportPageDXF - + File - + Export Page as DXF - + Save DXF file - + DXF (*.dxf) @@ -375,12 +375,12 @@ CmdTechDrawExportPageSVG - + File - + Export Page as SVG @@ -388,17 +388,17 @@ CmdTechDrawExtendShortenLineGroup - + TechDraw - + Extend Line - + Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -406,17 +406,17 @@ CmdTechDrawExtensionAreaAnnotation - + TechDraw - + Calculate the area of selected faces - + Select several faces<br> - click this tool @@ -520,17 +520,17 @@ CmdTechDrawExtensionChangeLineAttributes - + TechDraw - + Change Line Attributes - + Change the attributes of cosmetic lines and centerlines:<br>- Specify the line attributes (optional)<br>- Select one or more lines<br>- Click this tool @@ -544,13 +544,13 @@ - + Add Circle Centerlines - + Add centerlines to circles and arcs:<br>- Specify the line attributes (optional)<br>- Select one or more circles or arcs<br>- Click this tool @@ -828,17 +828,17 @@ CmdTechDrawExtensionDrawCirclesGroup - + TechDraw - + Add Cosmetic Circle - + Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool @@ -846,19 +846,19 @@ CmdTechDrawExtensionDrawCosmArc - + TechDraw - - + + Add Cosmetic Arc - - + + Add a cosmetic counter clockwise arc based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius and start angle)<br>- Select vertex 3 (end angle)<br>- Click this tool @@ -866,19 +866,19 @@ CmdTechDrawExtensionDrawCosmCircle - + TechDraw - - + + Add Cosmetic Circle - - + + Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool @@ -886,23 +886,23 @@ CmdTechDrawExtensionDrawCosmCircle3Points - + TechDraw - - + + Add Cosmetic Circle 3 Points - + Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select 3 vertexes<br>- Click this tool - + Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select three vertexes<br>- Click this tool @@ -910,19 +910,19 @@ CmdTechDrawExtensionExtendLine - + TechDraw - - + + Extend Line - - + + Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -936,13 +936,13 @@ - + Add Bolt Circle Centerlines - + Add centerlines to a circular pattern of circles:<br>- Specify the line attributes (optional)<br>- Select three or more circles forming a circular pattern<br>- Click this tool @@ -1046,17 +1046,17 @@ CmdTechDrawExtensionLinePPGroup - + TechDraw - + Add Cosmetic Parallel Line - + Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1064,19 +1064,19 @@ CmdTechDrawExtensionLineParallel - + TechDraw - - + + Add Cosmetic Parallel Line - - + + Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1084,19 +1084,19 @@ CmdTechDrawExtensionLinePerpendicular - + TechDraw - - + + Add Cosmetic Perpendicular Line - - + + Add a cosmetic line perpendicular to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1104,17 +1104,17 @@ CmdTechDrawExtensionLockUnlockView - + TechDraw - + Lock/Unlock View - + Lock or unlock the position of a view:<br>- Select a single view<br>- Click this tool @@ -1200,17 +1200,17 @@ CmdTechDrawExtensionPositionSectionView - + TechDraw - + Position Section View - + Orthogonally align a section view with its source view:<br>- Select a single section view<br>- Click this tool @@ -1236,17 +1236,17 @@ CmdTechDrawExtensionSelectLineAttributes - + TechDraw - + Select Line Attributes, Cascade Spacing and Delta Distance - + Select the attributes for new cosmetic lines and centerlines, and specify the cascade spacing and delta distance:<br>- Click this tool<br>- Specify the attributes, spacing and distance in the dialog box<br>- Press OK @@ -1254,19 +1254,19 @@ CmdTechDrawExtensionShortenLine - + TechDraw - - + + Shorten Line - - + + Shorten a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -1274,19 +1274,19 @@ CmdTechDrawExtensionThreadBoltBottom - + TechDraw - - + + Add Cosmetic Thread Bolt Bottom View - - + + Add a cosmetic thread to the top or bottom view of bolts/screws/rods:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool @@ -1294,19 +1294,19 @@ CmdTechDrawExtensionThreadBoltSide - + TechDraw - - + + Add Cosmetic Thread Bolt Side View - - + + Add a cosmetic thread to the side view of a bolt/screw/rod:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1314,19 +1314,19 @@ CmdTechDrawExtensionThreadHoleBottom - + TechDraw - - + + Add Cosmetic Thread Hole Bottom View - - + + Add a cosmetic thread to the top or bottom view of holes:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool @@ -1334,19 +1334,19 @@ CmdTechDrawExtensionThreadHoleSide - + TechDraw - - + + Add Cosmetic Thread Hole Side View - - + + Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1354,17 +1354,17 @@ CmdTechDrawExtensionThreadsGroup - + TechDraw - + Add Cosmetic Thread Hole Side View - + Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1372,17 +1372,17 @@ CmdTechDrawExtensionVertexAtIntersection - + TechDraw - + Add Cosmetic Intersection Vertex(es) - + Add cosmetic vertex(es) at the intersection(s) of selected edges:<br>- Select two edges (lines, circles and/or arcs)<br>- Click this tool @@ -1390,22 +1390,22 @@ CmdTechDrawExtentGroup - + TechDraw - + Insert Extent Dimension - + Horizontal Extent - + Vertical Extent @@ -1452,12 +1452,12 @@ CmdTechDrawHorizontalDimension - + TechDraw - + Insert Horizontal Dimension @@ -1465,12 +1465,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw - + Insert Horizontal Extent Dimension @@ -1478,28 +1478,28 @@ CmdTechDrawImage - + TechDraw - + Insert Bitmap Image - - + + Insert Bitmap from a file into a page - + Select an Image File - + Image (*.png *.jpg *.jpeg) @@ -1507,12 +1507,12 @@ CmdTechDrawLandmarkDimension - + TechDraw - + Insert Landmark Dimension - EXPERIMENTAL @@ -1533,12 +1533,12 @@ CmdTechDrawLengthDimension - + TechDraw - + Insert Length Dimension @@ -1546,12 +1546,12 @@ CmdTechDrawLinkDimension - + TechDraw - + Link Dimension to 3D Geometry @@ -1585,22 +1585,22 @@ CmdTechDrawPageTemplate - + TechDraw - + Insert Page using Template - + Select a Template File - + Template (*.svg *.dxf) @@ -1608,12 +1608,12 @@ CmdTechDrawPrintAll - + TechDraw - + Print All Pages @@ -1621,12 +1621,12 @@ CmdTechDrawProjectShape - + TechDraw - + Project shape... @@ -1634,17 +1634,17 @@ CmdTechDrawProjectionGroup - + TechDraw - + Insert Projection Group - + Insert multiple linked views of drawable object(s) @@ -1665,12 +1665,12 @@ CmdTechDrawRadiusDimension - + TechDraw - + Insert Radius Dimension @@ -1678,12 +1678,12 @@ CmdTechDrawRedrawPage - + TechDraw - + Redraw Page @@ -1704,22 +1704,22 @@ CmdTechDrawSectionGroup - + TechDraw - + Insert a simple or complex Section View - + Section View - + Complex Section @@ -1727,12 +1727,12 @@ CmdTechDrawSectionView - + TechDraw - + Insert Section View @@ -1753,17 +1753,17 @@ CmdTechDrawSpreadsheetView - + TechDraw - + Insert Spreadsheet View - + Insert View to a spreadsheet @@ -1874,17 +1874,17 @@ CmdTechDrawSymbol - + TechDraw - + Insert SVG Symbol - + Insert symbol from an SVG file @@ -1892,13 +1892,13 @@ CmdTechDrawToggleFrame - + TechDraw + - Turn View Frames On/Off @@ -1906,12 +1906,12 @@ CmdTechDrawVerticalDimension - + TechDraw - + Insert Vertical Dimension @@ -1919,12 +1919,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw - + Insert Vertical Extent Dimension @@ -1932,17 +1932,17 @@ CmdTechDrawView - + TechDraw - + Insert View - + Insert a View @@ -1964,58 +1964,58 @@ Command - + Drawing create page - + Create view - + Create Projection Group - + Create Clip - + ClipGroupAdd - + ClipGroupRemove - + Create Symbol - + Create DraftView - + Create ArchView - + Create spreadsheet view - + Save page to dxf @@ -2035,8 +2035,8 @@ - - + + Create Dimension @@ -2061,22 +2061,22 @@ - + Create Image - + Drag Balloon - + Drag Dimension - + Create Balloon @@ -2131,18 +2131,18 @@ - + Create SectionView - + Create ComplexSection - - + + Edit SectionView @@ -2257,72 +2257,72 @@ - + Circle Centerlines - + Cosmetic Thread Hole Side - + Cosmetic Thread Bolt Side - + Cosmetic Thread Hole Bottom - + Cosmetic Thread Bolt Bottom - + Change Line Attributes - + Cosmetic Intersection Vertex(es) - + Cosmetic Arc - + Cosmetic Circle - + Cosmetic Circle 3 Points - + Cosmetic Line Parallel/Perpendicular - + Lock/Unlock View - + Extend/Shorten Line - + Calculate Face Area @@ -2606,59 +2606,96 @@ - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + Wrong selection - - + + No Shapes, Groups or Links in this selection - - + + Select at least 1 DrawViewPart object as Base. - + I do not know what base view to use. - + No Base View, Shapes, Groups or Links in this selection - + No profile object found in selection - - - + + + + + + + + + + + + + + + + + + + Incorrect selection + + + + + + Select an object first + + + + + + Too many objects selected + + + + + + Create a page first. + + + @@ -2667,303 +2704,266 @@ - - - - - - - - Incorrect selection - - - - - - Select an object first - - - - - - Too many objects selected - - - - - - Create a page first. - - - - - - - - - - - - + No View of a Part in selection. - + Select one Clip group and one View. - + Select exactly one View to add to group. - + Select exactly one Clip group. - + Clip and View must be from same Page. - + Select exactly one View to remove from Group. - + View does not belong to a Clip - + Choose an SVG file to open - + Scalable Vector Graphic - + All Files - + Select at least one object. - + Please select only 1 Arch Section. - + No Arch Sections in selection. - + Select exactly one Spreadsheet object. - + No Drawing View - + Open Drawing View before attempting export to SVG. - + Can not export selection - + Page contains DrawViewArch which will not be exported. Continue? - - + + Ellipse Curve Warning - + Selected edge is an Ellipse. Radius will be approximate. Continue? - - + + BSpline Curve Warning - + Selected edge is a BSpline. Radius will be approximate. Continue? - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + Incorrect Selection - + Can not make 2d radius dimension from selection - + Can not make 3d radius dimension from selection - - + + BSpline Curve Error - + Selected edge is a BSpline and a radius can not be calculated. - + Can not make 2d diameter dimension from selection - + Can not make 3d diameter dimension from selection - + Selected edge is an Ellipse. Diameter will be approximate. Continue? - + Selected edge is a BSpline. Diameter will be approximate. Continue? - + Selected edge is a BSpline and a diameter can not be calculated. - + Can not make 2d linear dimension from selection - + Can not make 3d linear dimension from selection - + Can not make 2d horizontal dimension from selection - + Can not make 3d horizontal dimension from selection - + Can not make 2d vertical dimension from selection - + Can not make 3d vertical dimension from selection - - + + Can not make 2d angle dimension from selection - - + + Can not make 3d angle dimension from selection - + Can not make 2d extent dimension from selection - + Can not make 3d extent dimension from selection - + There is no Dimension in your selection - + There is no 3D object in your selection - + There are no 3D Edges or Vertices in your selection - + Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) @@ -2983,12 +2983,12 @@ - - - - - - + + + + + + @@ -3001,14 +3001,14 @@ - - - - - - - - + + + + + + + + Task In Progress @@ -3028,12 +3028,12 @@ - - - - - - + + + + + + @@ -3046,14 +3046,14 @@ - - - - - - - - + + + + + + + + Close active task dialog and try again. @@ -3224,33 +3224,33 @@ - + No TechDraw Page - + Need a TechDraw Page for this command - + Select a Face first - + No TechDraw object in selection - + Create a page to insert. - - + + No Faces to hatch in this selection @@ -3302,19 +3302,19 @@ - - + + Are you sure you want to continue? - + Show drawing - + Toggle KeepUpdated @@ -3341,7 +3341,7 @@ - + Rich text editor @@ -3423,8 +3423,8 @@ - - + + Operation Failed @@ -3515,15 +3515,15 @@ - - + + Selection is empty - + No object selected @@ -3538,17 +3538,17 @@ - + TechDraw Position Section View - + TechDraw Thread Hole Side - + Please select two straight lines @@ -3616,22 +3616,22 @@ - + Dimension Repair - + Can not use references from a different View - + Can not make a dimension from selection - + Can not make dimension from selection @@ -3654,8 +3654,8 @@ it has a weld symbol that would become broken. - - + + Object dependencies @@ -3685,7 +3685,7 @@ it has a weld symbol that would become broken. - + The page is not empty, therefore the following referencing objects might be lost: @@ -3703,7 +3703,7 @@ the following referencing objects might be lost: - + The following referencing object might break: @@ -3806,8 +3806,8 @@ it has a tile weld that would become broken. TaskPojGroup - - + + updates pending @@ -5339,7 +5339,7 @@ Do you want to continue? - + Selected: @@ -5816,7 +5816,7 @@ Do you want to continue? - + Can not continue. Object * %1 or %2 not found. @@ -6779,7 +6779,7 @@ You can pick further points to get line segments. - + Pick Points @@ -6860,51 +6860,51 @@ You can pick further points to get line segments. - - - + + + Edit points - + Edit Points - - + + Pick a starting point for leader line - + Save Points - + Click and drag markers to adjust leader line - - + + Save changes - + Left click to set a point - + Press OK or Cancel to continue - + In progress edit abandoned. Start over. @@ -7567,12 +7567,12 @@ using the given X/Y Spacing - + Nothing to apply. No section direction picked yet - + Can not continue. Object * %1 or %2 not found. @@ -7827,7 +7827,7 @@ using the given X/Y Spacing TechDraw_ComplexSection - + Insert complex Section View @@ -7864,7 +7864,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension @@ -7888,7 +7888,7 @@ using the given X/Y Spacing TechDraw_SectionView - + Insert simple Section View @@ -7928,7 +7928,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension @@ -8189,22 +8189,22 @@ using the given X/Y Spacing CmdTechDrawRadialGroup - + TechDraw - + Insert Radius Dimension - + Radius Dimension - + Diameter Linear @@ -8212,7 +8212,7 @@ using the given X/Y Spacing TechDraw_RadiusDimension - + Insert Radius Dimension @@ -8220,7 +8220,7 @@ using the given X/Y Spacing TechDraw_DiameterDimension - + Insert Diameter Dimension @@ -8228,27 +8228,27 @@ using the given X/Y Spacing CmdTechDrawLinearGroup - + TechDraw - + Insert Linear Dimension - + Linear Dimension - + Horizontal Linear - + Vertical Linear @@ -8256,7 +8256,7 @@ using the given X/Y Spacing TechDraw_LengthDimension - + Insert Linear Dimension @@ -8264,7 +8264,7 @@ using the given X/Y Spacing TechDraw_HorizontalLinear - + Insert Horizontal Linear Dimension @@ -8272,7 +8272,7 @@ using the given X/Y Spacing TechDraw_VerticalDimension - + Insert Vertical Linear Dimension @@ -8280,22 +8280,22 @@ using the given X/Y Spacing CmdTechDrawAngularGroup - + TechDraw - + Insert Angular Dimension - + Angular Dimension - + 3Pt Angular Dimension @@ -8303,7 +8303,7 @@ using the given X/Y Spacing TechDraw_AngleDimension - + Insert Angle Dimension @@ -8311,7 +8311,7 @@ using the given X/Y Spacing TechDraw_3PtAngleDimension - + Insert 3-Point Angle Dimension @@ -8319,12 +8319,12 @@ using the given X/Y Spacing CmdTechDrawDimensionRepair - + TechDraw - + Repair Dimension References @@ -8332,17 +8332,17 @@ using the given X/Y Spacing TechDrawGui::TaskDimRepair - + Object Name - + Object Label - + SubElement