diff --git a/src/Gui/Language/FreeCAD_af.qm b/src/Gui/Language/FreeCAD_af.qm index f48f3b8731..0b76086c79 100644 Binary files a/src/Gui/Language/FreeCAD_af.qm and b/src/Gui/Language/FreeCAD_af.qm differ diff --git a/src/Gui/Language/FreeCAD_af.ts b/src/Gui/Language/FreeCAD_af.ts index 53c0f88321..22687bba5e 100644 --- a/src/Gui/Language/FreeCAD_af.ts +++ b/src/Gui/Language/FreeCAD_af.ts @@ -3278,20 +3278,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Werkbank + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ar.qm b/src/Gui/Language/FreeCAD_ar.qm index 7d9d8d120d..96a7ccda72 100644 Binary files a/src/Gui/Language/FreeCAD_ar.qm and b/src/Gui/Language/FreeCAD_ar.qm differ diff --git a/src/Gui/Language/FreeCAD_ar.ts b/src/Gui/Language/FreeCAD_ar.ts index c71715c8ac..9e04019695 100644 --- a/src/Gui/Language/FreeCAD_ar.ts +++ b/src/Gui/Language/FreeCAD_ar.ts @@ -3279,20 +3279,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Workbench + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm index 6c30117033..66c15f2e20 100644 Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index adf9a776df..da8caae16b 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -3271,20 +3271,51 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Bancs de treball no carregats - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Carrega els bancs de treball seleccionats, afegint les seves finestres de preferencies al diáleg de preferències.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Carrega Selecció + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Bancs de treball disponibles</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Per preservar recursos, FreeCAD no carrega els bancs de treball fins que es fan servir. Carregar-los pot proporcionar accés a preferències addicionals relacionades amb la seva funcionalitat. </p> <p> Els següents bancs de treball estan disponibles en la present instal·lació, però encara no estan carregats:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Banc de treball + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index 508c26823c..6b0cf6b8b4 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index 0b971cbf00..e703af8f07 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -3273,20 +3273,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Načíst Vybrané + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Pracovní prostředí + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -3736,7 +3767,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Building US (ft-in/sqft/cft) - Building US (ft-in/sqft/cft) + Stavební US (ft-in/sqft/cuft) Imperial for Civil Eng (ft, ft/sec) @@ -3869,11 +3900,11 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Input the source value and unit - Input the source value and unit + Zadat zdrojovou hodnotu a jednotku Input here the unit for the result - Input here the unit for the result + Zde vložit jednotku pro výsledek Result @@ -3882,8 +3913,8 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. List of last used calculations To add a calculation press Return in the value input field - List of last used calculations -To add a calculation press Return in the value input field + Seznam naposledy použitých výpočtů +Pro přidání stiskněte tlačítko Return do pole zadání hodnoty Quantity @@ -3896,8 +3927,8 @@ To add a calculation press Return in the value input field Unit system to be used for the Quantity The preference system is the one set in the general preferences. - Unit system to be used for the Quantity -The preference system is the one set in the general preferences. + Systém jednotek, který se použije pro množství +Systém preferencí je systém nastavený v obecných preferencích. Decimals: @@ -3905,7 +3936,7 @@ The preference system is the one set in the general preferences. Decimals for the Quantity - Decimals for the Quantity + Desetinná místa pro množství Unit category: @@ -3913,7 +3944,7 @@ The preference system is the one set in the general preferences. Unit category for the Quantity - Unit category for the Quantity + Kategorie jednotky pro množství Copy the result into the clipboard @@ -4613,7 +4644,7 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. - The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. + Vybrané objekty obsahují jiné závislosti. Vyberte, které objekty chcete exportovat. Všechny závislosti jsou automaticky vybrány ve výchozím nastavení. Dependency @@ -4641,7 +4672,7 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Partial - Partial + Částečné @@ -5179,8 +5210,8 @@ Chcete uložit provedené změny? To link to external objects, the document must be saved at least once. Do you want to save the document now? - To link to external objects, the document must be saved at least once. -Do you want to save the document now? + Pro propojení s externími objekty musí být dokument uložen alespoň jednou. +Chcete dokument nyní uložit? @@ -6774,8 +6805,8 @@ Dejte si pozor na místo, kam klikáte. Failed to parse some of the expressions. Please check the Report View for more details. - Failed to parse some of the expressions. -Please check the Report View for more details. + Některé výrazy se nepodařilo analyzovat. +Další podrobnosti najdete v zobrazení Přehledu. Failed to paste expressions @@ -6787,11 +6818,11 @@ Please check the Report View for more details. Group with links - Group with links + Skupina s odkazy Group with transform links - Group with transform links + Skupina s transformačními odkazy Create link group failed @@ -6799,27 +6830,27 @@ Please check the Report View for more details. Create link failed - Create link failed + Selhalo vytvoření odkazu Failed to create relative link - Failed to create relative link + Selhalo vytvoření relativního odkazu Unlink failed - Unlink failed + Selhalo odpojení Replace link failed - Replace link failed + Selhalo nahrazení odkazu Failed to import links - Failed to import links + Selhal import odkazů Failed to import all links - Failed to import all links + Selhal import všech odkazů Invalid name @@ -6841,15 +6872,15 @@ underscore, and must not start with a digit. Failed to add property to '%1': %2 - Failed to add property to '%1': %2 + Selhalo přidání vlastnosti do '%1': %2 Save dependent files - Save dependent files + Uložit závislé soubory The file contains external dependencies. Do you want to save the dependent files, too? - The file contains external dependencies. Do you want to save the dependent files, too? + Soubor obsahuje externí závislosti. Chcete také uložit závislé soubory? Failed to save document @@ -6857,7 +6888,7 @@ underscore, and must not start with a digit. Documents contains cyclic dependencies. Do you still want to save them? - Documents contains cyclic dependencies. Do you still want to save them? + Dokumenty obsahují cyklické závislosti. Chcete je přesto uložit? Undo @@ -6881,7 +6912,7 @@ Choose 'Abort' to abort Do you want to save your changes to document before closing? - Do you want to save your changes to document before closing? + Přejete si uložit změny před zavřením dokumentu? Apply answer to all @@ -6911,9 +6942,9 @@ Choose 'Abort' to abort Please check report view for more... - + -Please check report view for more... +Další informace najdete v zobrazení Přehledu... @@ -6941,7 +6972,7 @@ Cesta: There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. + Při načítání souboru došlo k vážným chybám. Některá data mohla být změněna nebo vůbec neobnovena. Uložení projektu s největší pravděpodobností povede ke ztrátě dat. Workbenches @@ -6975,7 +7006,7 @@ Fyzická cesta: Box element selection - Box element selection + Výběr prvku oknem @@ -9602,8 +9633,8 @@ Are you sure you want to continue? To link to external objects, the document must be saved at least once. Do you want to save the document now? - To link to external objects, the document must be saved at least once. -Do you want to save the document now? + Pro propojení s externími objekty musí být dokument uložen alespoň jednou. +Chcete dokument nyní uložit? diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index 0b688a0632..0a4cd596a1 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 13c4f62754..28e84d2521 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -3260,20 +3260,51 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com>Nicht geladene Arbeitsbereiche - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Laden Sie die ausgewählten Arbeitsbereich und fügen Sie ihre Einstellungs-Fenster dem Einstellungs-Dialog hinzu.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Lädt die Auswahl + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Deaktivierte Arbeitsbereiche</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Um Ressourcen zu schonen, lädt FreeCAD keine Arbeitsbereiche solange sie nicht verwendet werden. Wenn sie geladen werden, haben Sie Zugriff auf die zusätzlichen Einstellungen.</p><p>Die folgenden Arbeitsbereiche sind in Ihrer Installation verfügbar, aber noch nicht geladen:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Arbeitsbereich + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index 26545a59ce..92cd8b8a84 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index 654d5bebfb..8c75d8d22e 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -3278,20 +3278,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Πάγκος εργασίας + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 411286328a..5b67e903ac 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index c532fd2453..dffeaba3da 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -3272,20 +3272,51 @@ También puede utilizar el formulario: John Doe <john@doe.com>Bancos de trabajo descargados - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Cargar los bancos de trabajo seleccionados, añadiendo sus ventanas de preferencia al diálogo de preferencias.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Cargar Seleccionado + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Bancos de trabajo disponibles</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Para preservar recursos, FreeCAD no carga los bancos de trabajo hasta que se usen. Cargarlos puede proporcionar acceso a preferencias adicionales relacionadas con su funcionalidad.</p><p>Los siguientes bancos de trabajo están disponibles en su instalación, pero aún no están cargados:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Escenario + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index 8556046b7d..2339f77b87 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 06bdc1ca70..2187cdc928 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -3279,20 +3279,51 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Deskargatutako lan-mahaiak - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Kargatu hautatutako lan-mahaiak eta gehitu haien hobespen-leihoak hobespenen elkarrizketa-koadroari.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Kargatu hautatua + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Deskargatutako lan-mahai erabilgarriak</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Baliabideak aurrezteko, FreeCADek ez ditu laneko mahaiak kargatzen haiek erabili nahi diren arte. Kargatzen direnean, haien funtzionaltasunari lotutako hobespen gehigarriak agertuko dira.</p><p>Honako laneko mahaiak daude erabilgarri zure instalazioan (oraindik kargatu gabe daude):</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Lan-mahaia + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index 65ca4fc8d9..cd69db5b9b 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 3488444965..a209ae55a9 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -3277,20 +3277,51 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Lataamattomat työpöydät - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Lataa valitut työpöydät lisäämällä niiden asetusikkunat asetusten ikkunaan.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Lataa valitut + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Saatavilla olevat ladattavat työpenkit</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Resurssien säilyttämiseksi FreeCAD ei lataa työpöytiä ennen kuin niitä käytetään. Niiden lataaminen voi tarjota pääsyn niiden toiminnallisuuteen liittyviin lisämieltymyksiin.</p><p>Seuraavat työpöydät ovat saatavilla asennuksessasi, mutta niitä ei ole vielä ladattu:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Työpöytä + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_fil.qm b/src/Gui/Language/FreeCAD_fil.qm index ef6e3f5a98..cf478870b9 100644 Binary files a/src/Gui/Language/FreeCAD_fil.qm and b/src/Gui/Language/FreeCAD_fil.qm differ diff --git a/src/Gui/Language/FreeCAD_fil.ts b/src/Gui/Language/FreeCAD_fil.ts index 2aeaaf4a3f..6a02f02dbe 100644 --- a/src/Gui/Language/FreeCAD_fil.ts +++ b/src/Gui/Language/FreeCAD_fil.ts @@ -3277,20 +3277,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Workbench + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index 526250d2d4..e054084c60 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index c3d5caba7e..979f752605 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -3273,20 +3273,51 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com>Ateliers non chargés - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Charger les ateliers sélectionnés, en ajoutant leurs fenêtres de préférences dans la boîte de dialogue des préférences.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Charger la sélection + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Ateliers non chargés disponibles</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Pour préserver les ressources, FreeCAD ne charge pas les ateliers tant qu'ils ne sont pas utilisés. Le chargement de ceux-ci peut donner accès à des préférences supplémentaires liées à leurs fonctionnalités.</p><p>Les ateliers suivants sont disponibles dans votre installation, mais ne sont pas encore chargés :</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Atelier + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_gl.qm b/src/Gui/Language/FreeCAD_gl.qm index a0caae8830..0c036b2f31 100644 Binary files a/src/Gui/Language/FreeCAD_gl.qm and b/src/Gui/Language/FreeCAD_gl.qm differ diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 226dd9e1d5..b47234a7e1 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -3278,20 +3278,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Banco de traballo + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index 6c89e63f6e..bfd2b86976 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index 95af81a859..b932fb4844 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -3304,20 +3304,51 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Workbench + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index e562da68eb..c225a3ca53 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 7c78b2a6c2..764456bdad 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -3271,20 +3271,51 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Betöltetlen munkafelületek - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>A kijelölt munkafelületek betöltése, a beállítási ablakaik hozzáadása a beállítások párbeszédpanelhez.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Kiválasztottak betöltése + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Elérhető betöltetlen munkafelületek</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Az erőforrások megőrzése érdekében a FreeCAD nem tölti be a munkafelületeket, amíg nem használják őket. A betöltésük hozzáférést biztosíthat a funkciójukhoz kapcsolódó további beállításokhoz.</p><p>A következő munkafelületek érhetők el a telepítéshez, de még nincsenek betöltve:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Munkafelület + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_id.qm b/src/Gui/Language/FreeCAD_id.qm index 3281dcfc18..a99701fcfc 100644 Binary files a/src/Gui/Language/FreeCAD_id.qm and b/src/Gui/Language/FreeCAD_id.qm differ diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index 86d9f1ff10..9f577e5165 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -3273,20 +3273,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Muat yang dipilih + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Meja kerja + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index 726c80c788..a4355536d4 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index 7ec7e6c1d7..e834fceb1f 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -3276,20 +3276,51 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Ambienti di lavoro scaricati - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Carica i workbenches selezionati, aggiungendo le loro finestre di preferenze alle impostazioni di preferenze.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Carica la selezione + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Ambienti di lavoro disponibili non caricati</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Per preservare le risorse, FreeCAD non carica gli ambienti di lavoro finché non vengono utilizzati. Il loro caricamento può fornire l'accesso a preferenze aggiuntive relative alla loro funzionalità.</p><p>I seguenti ambienti di lavoro sono disponibili nella tua installazione, ma non sono ancora caricati:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Ambiente + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index 3ca43bec00..99c0c41d8e 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index e32ef61bf9..0abdb1ed60 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -3248,20 +3248,51 @@ John Doe <john@doe.com> 形式を使用することもできます。ロードされていないワークベンチ - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>選択したワークベンチがロードされると、設定ダイアログに設定ウィンドウが追加されます。</p></body></html> + Workbench Name + Workbench Name - Load Selected - 選択された項目をロード + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>利用可能なロードされていないワークベンチが</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>リソースを節約するため、FreeCAD は使用されるまでワークベンチをロードしません。ワークベンチをロードするとその機能に関係する追加のユーザー設定へアクセスできるようになります。</p><p>以下のワークベンチが利用可ですが、まだロードされていません:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + ワークベンチ + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_kab.qm b/src/Gui/Language/FreeCAD_kab.qm index 01e22f0fca..91188ddf36 100644 Binary files a/src/Gui/Language/FreeCAD_kab.qm and b/src/Gui/Language/FreeCAD_kab.qm differ diff --git a/src/Gui/Language/FreeCAD_kab.ts b/src/Gui/Language/FreeCAD_kab.ts index 9e1b74828f..0d24074208 100644 --- a/src/Gui/Language/FreeCAD_kab.ts +++ b/src/Gui/Language/FreeCAD_kab.ts @@ -3278,20 +3278,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Atelier + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ko.qm b/src/Gui/Language/FreeCAD_ko.qm index 75db052839..cb4c09ce6f 100644 Binary files a/src/Gui/Language/FreeCAD_ko.qm and b/src/Gui/Language/FreeCAD_ko.qm differ diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 5613400012..1b3495a663 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -193,7 +193,7 @@ Measure distance - 거리측정 + 거리 측정 @@ -212,7 +212,7 @@ Enable Translations - 변환을 사용하려면 + 이동 가능 Enable Rotations @@ -1502,8 +1502,8 @@ See the FreeCAD Wiki for details about the image. Choose your preference for toolbar icon size. You can adjust this according to your screen size or personal taste - Choose your preference for toolbar icon size. You can adjust -this according to your screen size or personal taste + 도구 모음 아이콘 크기에 대한 기본 설정을 선택합니다. 당신은 조정할 수 있습니다 +이것은 화면 크기 또는 개인 취향에 따라 Tree view mode: @@ -1515,11 +1515,11 @@ this according to your screen size or personal taste 'ComboView': combine tree view and property view into one panel. 'TreeView and PropertyView': split tree view and property view into separate panel. 'Both': keep all three panels, and you can have two sets of tree view and property view. - Customize how tree view is shown in the panel (restart required). + 패널에 트리 보기가 표시되는 방식을 사용자 지정합니다(다시 시작해야 함). -'ComboView': combine tree view and property view into one panel. -'TreeView and PropertyView': split tree view and property view into separate panel. -'Both': keep all three panels, and you can have two sets of tree view and property view. +'ComboView': 트리 보기와 속성 보기를 하나의 패널로 결합합니다. +'TreeView 및 PropertyView': 트리 보기와 속성 보기를 별도의 패널로 분할합니다. +'Both': 세 개의 패널을 모두 유지하고 트리 보기와 속성 보기의 두 세트를 가질 수 있습니다. A Splash screen is a small loading window that is shown @@ -3277,20 +3277,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + 워크 벤치 + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -7885,7 +7916,7 @@ Physical path: Measure distance - 거리측정 + 거리 측정 @@ -7900,7 +7931,7 @@ Physical path: Measure distance - 거리측정 + 거리 측정 diff --git a/src/Gui/Language/FreeCAD_lt.qm b/src/Gui/Language/FreeCAD_lt.qm index 069d6c6fa4..defd50cfdd 100644 Binary files a/src/Gui/Language/FreeCAD_lt.qm and b/src/Gui/Language/FreeCAD_lt.qm differ diff --git a/src/Gui/Language/FreeCAD_lt.ts b/src/Gui/Language/FreeCAD_lt.ts index d4ca3e74b3..556688ab8a 100644 --- a/src/Gui/Language/FreeCAD_lt.ts +++ b/src/Gui/Language/FreeCAD_lt.ts @@ -3277,20 +3277,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Darbastalis + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index 78d61eb1e4..09fda25573 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index f8a6934466..e6fa6861e3 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -3274,20 +3274,51 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Ongeladen werkbanken - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Laad de geselecteerde werkbanken, waarbij de voorkeur vensters wordt toegevoegd aan het voorkeuren dialoog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Laad geselecteerde + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Beschikbare niet-ingeladen werkbanken</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Om werkgeheugen te sparen, laadt FreeCAD geen werkbanken totdat ze worden gebruikt. Het laden ervan kan toegang bieden tot extra voorkeuren met betrekking tot hun functionaliteit.</p><p>De volgende werkbanken zijn beschikbaar in uw installatie, maar zijn nog niet ingeladen:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Werkbank + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_no.qm b/src/Gui/Language/FreeCAD_no.qm index a419d641d8..6c3d075290 100644 Binary files a/src/Gui/Language/FreeCAD_no.qm and b/src/Gui/Language/FreeCAD_no.qm differ diff --git a/src/Gui/Language/FreeCAD_no.ts b/src/Gui/Language/FreeCAD_no.ts index 15f56c31d8..5a10cf0dad 100644 --- a/src/Gui/Language/FreeCAD_no.ts +++ b/src/Gui/Language/FreeCAD_no.ts @@ -3276,20 +3276,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Arbeidsbenk + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 05a9d3a44b..b093f64057 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 1113258312..d8b99fdc2e 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -3274,20 +3274,51 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com>Niezaładowane Środowiska pracy - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Załaduj wybrane Środowiska pracy, dodając ich konfigurację do okna preferencji głównych.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Załaduj wybrane + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Dostępne niezaładowane Środowiska pracy</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Aby oszczędzać zasoby, FreeCAD nie ładuje Środowisk pracy, dopóki nie zostaną użyte. Ich załadowanie może zapewnić dostęp do dodatkowych preferencji związanych z ich funkcjonalnością.</p><p>Następujące Środowiska pracy są dostępne w twojej instalacji, ale nie są jeszcze załadowane:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Środowiska pracy + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -5733,7 +5764,7 @@ Do you want to specify another directory? Box select - Zaznacz obszar + Zaznacz obszarem On-top when selected @@ -7934,7 +7965,7 @@ Physical path: Unnamed - Bez nazwy + Nienazwany @@ -8257,7 +8288,7 @@ Physical path: Save All - Zapisz wszystko + Zapisz wszystkie Save all opened document @@ -8287,7 +8318,7 @@ Physical path: Save a &Copy... - Zapisz i &kopiuj... + Zapisz jako &kopię ... Save a copy of the active document under a new file name @@ -9404,7 +9435,7 @@ Physical path: Box zoom - Powiększ pole + Powiększ obszar diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index a7c2924166..645c1d84dd 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 00b7100699..fc20ab9e87 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -3266,20 +3266,51 @@ Você também pode usar o formulário: João Silva <joao@silva.com>Bancadas não carregadas - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Carregue as bancadas selecionadas, adicionando suas janelas de preferência ao diálogo de preferências.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Carregar Selecionados + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Bancadas não carregadas disponíveis</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Para preservar os recursos, o FreeCAD não carrega bancadas até que sejam usadas. Carregá-las pode fornecer acesso a preferências adicionais relacionadas à sua funcionalidade.</p><p>As seguintes bancadas estão disponíveis em sua instalação, mas ainda não foram carregadas:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Bancada + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -5384,7 +5415,7 @@ Deseja prosseguir? Show all - Mostrar todos + Mostrar todas Add property diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 583352d644..f3f41d598c 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 592b1c3a16..d1070e7703 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -3273,20 +3273,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Bancada de trabalho + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index dc03f7cc39..e22ce0c52b 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 4034f5f4a6..2a44bd2a6b 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -2313,30 +2313,30 @@ pe ecran în timpul afișării avertismentului When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message - When a normal message has occurred, the Report View dialog becomes visible -on-screen while displaying the message + Când a apărut un mesaj normal, fereastra Vizualizare Raport va deveni vizibilă +pe ecran în timp ce afișează mesajul Show report view on normal message - Show report view on normal message + Arată rapoarte pentru mesajele normale When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message - When a log message has occurred, the Report View dialog becomes visible -on-screen while displaying the log message + Când a apărut un mesaj de jurnal, fereastra Vizualizare Raport va deveni vizibilă +pe ecran în timp ce afișează mesajul de jurnal Show report view on log message - Show report view on log message + Arată rapoarte pentru mesajele de jurnal Font color for normal messages in Report view panel - Font color for normal messages in Report view panel + Culoarea font-ului pentru mesajele normale în fereastra de Vizualizare Rapoarte Font color for log messages in Report view panel - Font color for log messages in Report view panel + Culoarea font-ului pentru mesajele de jurnal în fereastra de Vizualizare Rapoarte Font color for warning messages in Report view panel @@ -2494,7 +2494,7 @@ vor fi afișate în colțul din stânga jos în fișierele deschise Remember active workbench by tab - Remember active workbench by tab + Memorează bancul de lucru activ în fiecare filă Rendering @@ -2511,24 +2511,24 @@ can be rendered directly by GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by GPU. + Dacă este selectat vor fi folosite obiecte Vertex Buffer Objects (VBO). +Un VBO este o funcție OpenGL care oferă metode de încărcare +a datelor vertex (poziție, vector normal, culoare etc.) pe cardul grafic. +VBOs oferă câștiguri substanțiale de performanță deoarece datele rezidă +în memoria grafică și nu în memoria sistemului, astfel +pot fi redate direct de GPU. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support on the FreeCAD forums +Notă: Uneori, această caracteristică poate duce la o serie de probleme +diferite, de la anomalii grafice până la erori de defecțiune GPU. Amintiţi-vă să +raportaţi această setare ca activată atunci când căutaţi suport pe forumurile FreeCAD Use OpenGL VBO (Vertex Buffer Object) - Use OpenGL VBO (Vertex Buffer Object) + Utilizaţi OpenGL VBO (Vertex Buffer Object) Render cache - Render cache + Cache-ul de randare 'Render Caching' is another way to say 'Rendering Acceleration'. @@ -3274,20 +3274,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Banc de lucru + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index 979bc084d5..6a3fe510eb 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index a18f89292d..ca922ee0e7 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Введите выражение... Expression: - Expression: + Выражение: @@ -505,17 +505,17 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD would not be possible without the contributions of + Список всех, кто внес свой вклад в создание FreeCAD Individuals Header for the list of individual people in the Credits list. - Individuals + Участники Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Организации @@ -1423,7 +1423,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Code lines will be numbered - Code lines will be numbered + Строки кода будут пронумерованы @@ -1506,7 +1506,7 @@ this according to your screen size or personal taste Tree view mode: - Режим просмотра "Дерево": + Режим древовидного отображения: Customize how tree view is shown in the panel (restart required). @@ -2040,7 +2040,7 @@ Specify another directory, please. Gui::Dialog::DlgPreferences Preferences - Предпочтения + Настройки @@ -2247,7 +2247,7 @@ Specify another directory, please. Colors - Цвета + Выделение цветом Normal messages: @@ -2255,7 +2255,7 @@ Specify another directory, please. Log messages: - Журнал (log): + Информационные сообщения (log): Warnings: @@ -2301,7 +2301,7 @@ on-screen while displaying the error Show report view on error - Показать отчёт в случае ошибки + Показать отчёт в случае вывода сообщения об ошибке (error) When a warning has occurred, the Report View dialog becomes visible @@ -2311,7 +2311,7 @@ on-screen while displaying the warning Show report view on warning - Показать отчёт о предупреждении + Показать отчёт в случае вывода предупреждения (warning) When a normal message has occurred, the Report View dialog becomes visible @@ -2321,7 +2321,7 @@ on-screen while displaying the message Show report view on normal message - Показывать отчёт в обычном сообщении + Показать отчёт в случае вывода обычного сообщения (normal) When a log message has occurred, the Report View dialog becomes visible @@ -2331,7 +2331,7 @@ on-screen while displaying the log message Show report view on log message - Показать отчет в журнале + Показать отчёт в случае вывода информационного сообщения (log) Font color for normal messages in Report view panel @@ -2367,7 +2367,7 @@ from Python console to Report view panel Include a timecode for each entry - Включить код времени для каждой записи + Вставлять время вывода в каждую запись отчёта Normal messages will be recorded @@ -2375,7 +2375,7 @@ from Python console to Report view panel Record normal messages - Записывать обычные сообщения + Записывать обычные сообщения (normal) @@ -2640,15 +2640,14 @@ Changing this option requires a restart of the application. What kind of multisample anti-aliasing is used - What kind of multisample anti-aliasing is used + Какой тип многопроходного сглаживания используется Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - Eye-to-eye distance used for stereo projections. -The specified value is a factor that will be multiplied with the -bounding box size of the 3D object that is currently displayed. + Межцентровое расстояние глаз используется для стерео проекций. +Указанное значение — это множитель, который будет умножаться на габаритный прямоугольный каркас текущего отображаемого трехмерного объекта. @@ -3273,23 +3272,54 @@ Opening mode: If you defined a hinge in this component or any other earlier in t Gui::Dialog::DlgSettingsLazyLoaded Unloaded Workbenches - Выгруженные верстаки + Незагруженные верстаки - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Загрузить выбранные верстаки, добавляя их окна настроек в диалог настроек.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Загрузить выбранный + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Доступные выгруженные верстаки</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Чтобы сохранить ресурсы, FreeCAD не загружает верстаки до тех пор, пока они не будут использованы. Загрузка их может обеспечить доступ к дополнительным настройкам, связанным с их функциональностью.</p><p>В вашей установке доступны следующие верстаки, но еще не загружены:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Верстак + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -3376,19 +3406,19 @@ Opening mode: If you defined a hinge in this component or any other earlier in t Shortcut count - Количество ярлыков + Количество макросов запускаемых комбинациями клавиш How many recent macros should have shortcuts - Сколько последних макросов должно иметь ярлыки + Определяет сколько макросов из списка "недавние макросы" должны иметь свою комбинацию клавиш Keyboard Modifiers - Модификаторы клавиатуры + Комбинация клавиш Keyboard modifiers, default = Ctrl+Shift+ - Модификаторы клавиатуры, по умолчанию = Ctrl+Shift+ + Комбинация клавиш для быстрого запуска макроса из списка "недавние макросы", по умолчанию = Ctrl+Shift+ @@ -3595,25 +3625,25 @@ Mouse tilting is not disabled by this setting. Rotates to nearest possible state when clicking a cube face - Rotates to nearest possible state when clicking a cube face + Поворачивать до ближайшего состояния при клике на кубическую грань Rotate to nearest - Rotate to nearest + Повернуть к ближайшему Cube size - Cube size + Размер куба Size of the navigation cube - Size of the navigation cube + Размер навигационного куба How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. + Насколько будет масштабировано. +Шаг масштаба '1' означает коэффициент 7.5 для каждого шага масштаба. @@ -3754,7 +3784,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Gui::Dialog::DlgSettingsViewColor Colors - Цвета + Выделение цветом Selection @@ -3932,7 +3962,7 @@ The preference system is the one set in the general preferences. unknown unit: - unknown unit: + неизвестная единица: @@ -6204,7 +6234,7 @@ Do you want to specify another directory? Preferences... - Предпочтения... + Настройки... Quit %1 @@ -6952,9 +6982,9 @@ Document: Physical path: - + -Physical path: +Физический путь: @@ -7452,7 +7482,7 @@ Physical path: FreeCAD FAQ - FreeCAD ЧаВо + FreeCAD Часто Задаваемые Вопросы Frequently Asked Questions on the FreeCAD website diff --git a/src/Gui/Language/FreeCAD_sk.qm b/src/Gui/Language/FreeCAD_sk.qm index d8e5565437..8cd2ebc212 100644 Binary files a/src/Gui/Language/FreeCAD_sk.qm and b/src/Gui/Language/FreeCAD_sk.qm differ diff --git a/src/Gui/Language/FreeCAD_sk.ts b/src/Gui/Language/FreeCAD_sk.ts index c1b68e0c54..5b9853bdb2 100644 --- a/src/Gui/Language/FreeCAD_sk.ts +++ b/src/Gui/Language/FreeCAD_sk.ts @@ -3276,20 +3276,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Pracovný priestor + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index e63f28105c..8344318a1a 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 96cb348fb5..1ae82e5d6f 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -3278,20 +3278,51 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Odložena delovna okolja - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Naloži izbrana delovna okolja in njihova prednastavitvena okna dodaj k pogovornemu oknu s prednastavitvami.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Naloži izbrano + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Odložena delovna okolja, ki so na voljo</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>Zaradi varčevanja z viri FreeCAD ne naloži delovnih okolij, dokler se jih ne uporabi. Če jih naložite, vam bodo lahko na voljo dodatne prednastavitve, ki so povezane z njihovimi zmožnostmi.</p><p>V vaši namestitvi so na voljo naslednja delovna okolja, ki niso še naložena:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Delovno okolje + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_sr.qm b/src/Gui/Language/FreeCAD_sr.qm index 8733aaf78a..ded86875eb 100644 Binary files a/src/Gui/Language/FreeCAD_sr.qm and b/src/Gui/Language/FreeCAD_sr.qm differ diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 1014c35a9e..a68aa1bc8b 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -3277,20 +3277,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Радни сто + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index 1e3d3ca7ec..cbacacf197 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 2db2a2ad73..ebbb274674 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Ange ett uttryck... Expression: - Expression: + Uttryck: @@ -3278,20 +3278,51 @@ Du kan också använda formuläret: John Doe <john@doe.com> Oladdade arbetsbänkar - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Ladda de valda arbetsbänkarna och lägg till deras inställningsfönster i dialogrutan för inställningar.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Ladda in valda + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Tillgängliga oladdade arbetsbänkar</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>För att bevara resurser laddar FreeCAD inte arbetsbänkar förrän de används. Laddar dem kan ge tillgång till ytterligare inställningar relaterade till deras funktionalitet.</p><p>Följande arbetsbänkar finns tillgängliga i din installation, men är ännu inte laddade:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Arbetsbänk + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_tr.qm b/src/Gui/Language/FreeCAD_tr.qm index e59790b151..bfe52428b5 100644 Binary files a/src/Gui/Language/FreeCAD_tr.qm and b/src/Gui/Language/FreeCAD_tr.qm differ diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 3c28bc829f..e37d48a209 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Bir ifade girin... Expression: - Expression: + İfade: @@ -505,17 +505,17 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD would not be possible without the contributions of + FreeCAD, bu katkılar olmadan ortaya çıkamazdı: Individuals Header for the list of individual people in the Credits list. - Individuals + Kişiler Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Kuruluşlar @@ -1422,7 +1422,7 @@ Eğer bu işaretlenmeyecekse, özelliğe benzersiz bir ad verilmelidir ve böyle Code lines will be numbered - Code lines will be numbered + Kod satırları numaralandırılacak @@ -2639,15 +2639,15 @@ Bu seçeneğin değiştirilmesi, uygulamanın yeniden başlatılmasını gerekti What kind of multisample anti-aliasing is used - What kind of multisample anti-aliasing is used + Kullanılan çok örneklemeli kenar düzeltme türü Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - Eye-to-eye distance used for stereo projections. -The specified value is a factor that will be multiplied with the -bounding box size of the 3D object that is currently displayed. + Stereo gösterimler için kullanılan iki göz arası mesafe. +Belirlenen değer, şuan görüntülenen 3B nesnenin sınırlama +çerçevesi boyutu ile çoğaltılacak bir etkendir. @@ -3271,20 +3271,51 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Çalışma Tezgahları Yüklenmedi - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body> <p> Tercih pencerelerini tercihler iletişim kutusuna ekleyerek seçilen çalışma tezgahlarını yükleyin. </p> </body> </html> + Workbench Name + Workbench Name - Load Selected - Seçileni Yükle + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body> <p> Kullanılabilir yüklenmemiş çalışma tezgahları </p> </body> </html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body> <p> Kaynakları korumak için FreeCAD, kullanılıncaya kadar çalışma tezgahlarını yüklemez. Bunları yüklemek, işlevleriyle ilgili ek tercihlere erişim sağlayabilir. </p> <p> Aşağıdaki çalışma tezgahları kurulumunuzda mevcuttur, ancak henüz yüklenmemiştir: </p> </body> </html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Tezgah + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -3590,25 +3621,25 @@ Bu ayarla fareyi eğme devre dışı bırakılmaz. Rotates to nearest possible state when clicking a cube face - Rotates to nearest possible state when clicking a cube face + Küp yüzeyine tıklandığında, mümkün olan en yakın konuma döndürür Rotate to nearest - Rotate to nearest + En yakına döndür Cube size - Cube size + Küp boyutu Size of the navigation cube - Size of the navigation cube + Gezinme küpü boyutu How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. + Yakınlaştırma miktarı. +1 yakınlaştırma adımı, adım başına 7.5 katsayı anlamına gelir. @@ -3926,7 +3957,7 @@ Tercih edilen sistem, genel tercihlerdeki tek ayardır. unknown unit: - unknown unit: + bilinmeyen birim: @@ -6947,9 +6978,9 @@ Belge: Physical path: - + -Physical path: +Fiziksel yol: diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index d33049a51a..07a7df517c 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 8913b60203..88dc837201 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -3275,20 +3275,51 @@ You can also use the form: John Doe <john@doe.com> Вивантажені робочі середовища - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Завантажити вибране + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Доступні вивантажені робочі середовища</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Робочий простір + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_val-ES.qm b/src/Gui/Language/FreeCAD_val-ES.qm index b7f01eab7a..077d76587f 100644 Binary files a/src/Gui/Language/FreeCAD_val-ES.qm and b/src/Gui/Language/FreeCAD_val-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index ded9d10ffa..232cc4e292 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -3265,20 +3265,51 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Banc de treball + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_vi.qm b/src/Gui/Language/FreeCAD_vi.qm index 06391aad24..c7d31ad3f5 100644 Binary files a/src/Gui/Language/FreeCAD_vi.qm and b/src/Gui/Language/FreeCAD_vi.qm differ diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index 42bf78bd81..8b8c80dd60 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -3279,20 +3279,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + Bàn làm việc + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 251e225e25..0936487cd5 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index fce07b1ae8..692df1bbfc 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -3267,20 +3267,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - 加载所选 + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + 工作台 + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now @@ -6894,7 +6925,7 @@ Choose 'Abort' to abort Are you sure you want to continue? - Are you sure you want to continue? + 您确定要继续吗？ diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index 819fd15f96..1dc2943dbb 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 2999cb60ed..aecc4045cc 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -3267,20 +3267,51 @@ You can also use the form: John Doe <john@doe.com> Unloaded Workbenches - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name + Workbench Name - Load Selected - Load Selected + Autoload? + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + 工作台 + + + Autoload + Autoload + + + If checked + If checked + + + will be loaded automatically when FreeCAD starts up + will be loaded automatically when FreeCAD starts up + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + Loaded + Loaded + + + Load now + Load now diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts index 9e5e599643..d8b56b375f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Checking for updates... - + Apply Pas toe - + update(s) update(s) - + No update available No update available - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Unable to install - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon Unable to remove this addon - + Macro successfully removed. Macro successfully removed. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts index a9237a61a2..25724b8bca 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ غير قادر على استرداد وصف لهذا الماكرو. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! الإضافات التي يمكن تثبيتها هنا ليست رسميا جزءا من FreeCAD، ولا يتم مراجعتها من قبل فريق FreeCAD. تأكد من معرفة ما تقوم بتثبيته! - + Addon manager مدير الملحق - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. يجب إعادة تشغيل FreeCAD حتى تصبح التغييرات نافذة المفعول. اضغط على موافق لإعادة تشغيل FreeCad الآن، أو إلغاء الأمر لإعادة التشغيل لاحقًا. - + Checking for updates... يتم الآن التحقق من وجود تحديثات... - + Apply Apply - + update(s) تحديث (تحديثات) - + No update available لا يوجد تحديث متوفر - + Macro successfully installed. The macro is now available from the Macros dialog. تم تثبيت الماكرو بنجاح. الماكرو متوفر الآن من مربع حوار وحدات الماكرو. - + Unable to install غير قادر على التثبيت - + Addon successfully removed. Please restart FreeCAD تمت إزالة الملحق بنجاح. الرجاء إعادة تشغيل FreeCad - + Unable to remove this addon تعذر إزالة هذا الملحق - + Macro successfully removed. تمت إزالة الماكرو بنجاح. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index ae79e854d9..9ed77112c9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localització de la instal·lació @@ -22,257 +22,257 @@ No es pot recuperar una descripció d'aquesta macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Els complements que es poden instal·lar aquí no formen part oficialment de FreeCAD, i l'equip de FreeCAD no els pot revisar. Assegureu-vos que sabeu què esteu instal·lant! - + Addon manager Gestor d'extensions - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Cal que reinicis FreeCAD per què els canvis s'efectuin. Premi Acceptar per reinciciar-lo ara, o bé, Cancel·lar per fer-ho més tard. - + Checking for updates... Buscant actualitzacions... - + Apply Aplica - + update(s) actualització(ns) - + No update available No hi ha actualizacions disponibles - + Macro successfully installed. The macro is now available from the Macros dialog. S'ha instal·lat la macro correctament. La macro ja està disponible des del quadre de diàleg Macros. - + Unable to install No es pot instal·lar - + Addon successfully removed. Please restart FreeCAD Extensió eliminada exitosament. Si-us-plau, reinicieu FreeCAD - + Unable to remove this addon No es pot esborrar l'extensió - + Macro successfully removed. S'ha eliminat la macro correctament. - + Macro could not be removed. No s'ha pogut eliminar la macro. - + Unable to download addon list. No es pot descarregar la llista d'extensions. - + Workbenches list was updated. Banc de treball actualitzat. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Manca el mòdul python - + Missing optional python module (doesn't prevent installing) Manca el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Si us plau, instal·leu primer els components que manquen. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython! No es poden recuperar les macros de git - + Installed S'ha instal·lat - + Update available Hi ha una actualització disponible - + Restart required S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançat d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path S'ha produït un error amb la recuperació de macros de Git, possiblement l'executable de Git no estigui en la ruta - + This addon is marked as Python 2 Only Aquest complement està marcat només com a Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. És possible que aquest banc de treball ja no es mantingui i instal·lar-lo en un sistema Python 3 provocarà probablement errors en iniciar-se o en ús. - + User requested updating a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + User requested installing a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembla que és hi ha algun problema de connexió amb el Wiki, per tant no es pot recuperar la llista de macros de la Wiki en aquest moment - + Raw markdown displayed Mostrant Markdown sense processar - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index 8e17c6cd3c..c16ad385a1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umístění instalace @@ -22,257 +22,257 @@ Nelze načíst popis tohto makra. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Doplňky, které zde lze nainstalovat, nejsou oficiálně součástí FreeCAD a nejsou přezkoumány týmem FreeCAD. Ujistěte se, že víte, co instalujete! - + Addon manager Správce rozšíření - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Aby se změny projevily, musíte FreeCAD restartovat. Stiskněte Ok pro restartování FreeCADu, nebo Zrušit pro pozdější restart. - + Checking for updates... Hledání aktualizací... - + Apply Použít - + update(s) aktualizace - + No update available Nejsou k dispozici žádné aktualizace - + Macro successfully installed. The macro is now available from the Macros dialog. Makro úspěšně nainstalováno. Makro je nyní k dispozici v dialogovém okně Makra. - + Unable to install Nelze nainstalovat - + Addon successfully removed. Please restart FreeCAD Doplněk byl úspěšně odstraněn. Restartujte prosím FreeCAD - + Unable to remove this addon Tento doplněk nelze odstranit - + Macro successfully removed. Makro bylo úspěšně odstraněno. - + Macro could not be removed. Makro nelze odstranit. - + Unable to download addon list. Seznam doplňků nelze stáhnout. - + Workbenches list was updated. Seznam pracovních prostředí byl aktualizován. - + Outdated GitPython detected, consider upgrading with pip. Zjištěn zastaralý GitPython, zvažte upgrade pomocí pip. - + List of macros successfully retrieved. Seznam maker úspěšně načten. - + Retrieving description... Načítání popisu... - + Retrieving info from Načítání informací z - + An update is available for this addon. Pro tento doplněk je dostupná aktualizace. - + This addon is already installed. Toto rozšíření je již nainstalováno. - + Retrieving info from git Načítání informací z gitu - + Retrieving info from wiki Načítání informací z wiki - + GitPython not found. Using standard download instead. GitPython nenalezen. Použijte standardní způsob stažení. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaše verze pythonu pravděpodobně nepodporuje ZIP soubory. Nelze pokračovat. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Pracovní prostředí bylo úspěšně nainstalováno. Pro aplikaci změn prosím restartujte FreeCAD. - + Missing workbench Chybí pracovní prostředí - + Missing python module Chybějící modul python - + Missing optional python module (doesn't prevent installing) Chybí volitelný modul pythonu (nebrání instalaci) - + Some errors were found that prevent to install this workbench Byly nalezeny chyby, které brání instalaci tohoto pracovního prostředí - + Please install the missing components first. Nejprve prosím nainstalujte chybějící komponenty. - + Error: Unable to download Chyba: Nelze stáhnout - + Successfully installed Úspěšně nainstalováno - + GitPython not installed! Cannot retrieve macros from git GitPython není nainstalován! Nelze načíst makra z gitu - + Installed Nainstalováno - + Update available Dostupná aktualizace - + Restart required Je vyžadován restart - + This macro is already installed. Toto makro je již nainstalováno. - + A macro has been installed and is available under Macro -> Macros menu Makro bylo nainstalováno a je k dispozici v menu Makro -> Makra - + This addon is marked as obsolete Tento doplněk je označen jako zastaralý - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obvykle znamená, že již není udržován a některé pokročilejší doplňky v tomto seznamu poskytují stejnou funkčnost. - + Error: Unable to locate zip from Chyba: Nelze najít zip z - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Něco se pokazilo s Git Macro Retrieval, možná není spustitelný Git v cestě - + This addon is marked as Python 2 Only Tento doplněk je označen pouze jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tento pracovní prostředí již nemusí být udržován a instalace do systému Python 3 bude mít pravděpodobně za následek chyby při startu nebo při používání. - + User requested updating a Python 2 workbench on a system running Python 3 - Uživatel požádal o aktualizaci pracovního prostředí Pythonu 2 do systému, který používá Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Pracovní prostředí bylo úspěšně aktualizováno. Pro aplikaci změn prosím restartujte FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uživatel požádal o instalaci pracovního prostředí Pythonu 2 do systému, který používá Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Zdá se, že je problém s připojením k Wiki, proto momentálně nelze získat seznam maker Wiki - + Raw markdown displayed Zobrazit čisté markdown - + Python Markdown library is missing. Chybí python knihovna Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 00fdcf76a0..0d63b2feac 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installationsort @@ -22,257 +22,257 @@ Eine Beschreibung für dieses Makro kann nicht abgerufen werden. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Die Addons, die hier installiert werden können, sind nicht offiziell Teil von FreeCAD und werden nicht vom FreeCAD Team überprüft. Stellen Sie sicher, dass Sie wissen, was Sie installieren! - + Addon manager Addon-Manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Sie müssen FreeCAD neu starten, um die Änderungen anzuwenden. Drücken Sie Ok, um FreeCAD jetzt neu zu starten, oder Abbrechen, um später neu zu starten. - + Checking for updates... Nach Updates suchen... - + Apply Übernehmen - + update(s) Update(s) - + No update available Kein Update verfügbar - + Macro successfully installed. The macro is now available from the Macros dialog. Das Makro wurde erfolgreich installiert. Es ist nun im Macros-Dialog verfügbar. - + Unable to install Installation nicht möglich - + Addon successfully removed. Please restart FreeCAD Das Addon wurde erfolgreich entfernt. Bitte starten Sie FreeCAD neu - + Unable to remove this addon Dieses Addon konnte nicht entfernt werden - + Macro successfully removed. Das Makro wurde erfolgreich entfernt. - + Macro could not be removed. Das Makro konnte nicht entfernt werden. - + Unable to download addon list. Die Addon-Liste konnte nicht geladen werden. - + Workbenches list was updated. Die Liste der Arbeitsbereiche wurde aktualisiert. - + Outdated GitPython detected, consider upgrading with pip. Es wurde eine veraltete GitPython-Version erkannt, erwäge das Upgrade mit Pip. - + List of macros successfully retrieved. Die Makro-Liste wurde erfolgreich abgerufen. - + Retrieving description... Beschreibung wird abgerufen... - + Retrieving info from Informationen werden abgerufen von - + An update is available for this addon. Für dieses Addon ist ein Update verfügbar. - + This addon is already installed. Dieses Addon ist bereits installiert. - + Retrieving info from git Informationen werden von Git abgerufen - + Retrieving info from wiki Informationen werden aus den Wiki abgerufen - + GitPython not found. Using standard download instead. GitPython wurde nicht gefunden. Stattdessen wird der Standarddownload verwendet. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ihre Version von Python scheint ZIP-Dateien nicht zu unterstützen. Aktion kann nicht fortgesetzt werden. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich installiert. Bitte starten Sie FreeCAD neu, um die Änderungen anzuwenden. - + Missing workbench Fehlender Arbeitsbereich - + Missing python module Fehlendes Python-Modul - + Missing optional python module (doesn't prevent installing) Fehlendes optionales Python-Modul (verhindert nicht die Installation) - + Some errors were found that prevent to install this workbench Einige Fehler verhindern die Installation dieses Arbeitsbereiches - + Please install the missing components first. Bitte installieren Sie zuerst die fehlenden Komponenten. - + Error: Unable to download Fehler: Download nicht möglich - + Successfully installed Installation erfolgreich - + GitPython not installed! Cannot retrieve macros from git GitPython is nicht installiert! Makros können nicht von Git abgerufen werden - + Installed Installiert - + Update available Update verfügbar - + Restart required Neustart erforderlich - + This macro is already installed. Dieses Makro ist bereits installiert. - + A macro has been installed and is available under Macro -> Macros menu Ein Makro wurde installiert und ist verfügbar unter Makro -> Makros-Menü - + This addon is marked as obsolete Dieses Addon ist als veraltet markiert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dies bedeutet normalerweise, dass es nicht mehr gewartet wird und ein fortschrittlicheres Addon in dieser Liste die gleiche Funktionalität bietet. - + Error: Unable to locate zip from Fehler: Zip-Datei kann nicht gefunden werden von - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ein Fehler ist bei der Git-Makro Abfrage aufgetreten, möglicherweise befindet sich die ausführbare Git-Datei nicht in dem Pfad - + This addon is marked as Python 2 Only Dieses Addon ist als nur für Python 2 gekennzeichnet - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Dieser Arbeitsbereich wird möglicherweise nicht mehr gewartet und die Installation auf einem Python-3-System wird höchstwahrscheinlich zu Fehlern beim Start oder während der Nutzung führen. - + User requested updating a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Aktualisierung eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich aktualisiert. Bitte starten Sie FreeCAD neu, um die Änderungen zu übernehmen. - + User requested installing a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Installation eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Anscheinend ist ein Problem beim Verbinden mit dem Wiki aufgetreten, daher kann die Wiki-Makroliste zu diesem Zeitpunkt nicht abgerufen werden - + Raw markdown displayed Unbearbeitetes Markdown angezeigt - + Python Markdown library is missing. Python Markdown Bibliothek fehlt. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index 1ae63456e1..f69ac1c896 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Δεν είναι δυνατή η ανάκτηση μιας περιγραφής για αυτή τη μακροεντολή. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Τα πρόσθετα που μπορούν να εγκατασταθούν εδώ δεν είναι επίσημα μέρος του FreeCAD, και δεν ελέγχονται από την ομάδα του FreeCAD. Βεβαιωθείτε ότι γνωρίζετε τι εγκαθιστάτε! - + Addon manager Διαχειριστής προσθέτων - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Πρέπει να γίνει επανεκκίνηση του FreeCad για να εφαρμοστούν οι αλλαγές. Πατήστε Ok για να επανεκκινήσετε το FreeCAD τώρα, ή Cancel για να γίνει επανεκκίνηση αργότερα. - + Checking for updates... Έλεγχος για ενημερώσεις... - + Apply Εφαρμογή - + update(s) ενημέρωση(-εις) - + No update available Δεν υπάρχει διαθέσιμη ενημέρωση - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Δεν είναι δυνατή η εγκατάσταση - + Addon successfully removed. Please restart FreeCAD Το πρόσθετο αφαιρέθηκε επιτυχώς. Παρακαλώ επανεκκινήστε το FreeCAD - + Unable to remove this addon Δεν είναι δυνατή η αφαίρεση αυτού του πρόσθετου - + Macro successfully removed. Η μακροεντολή αφαιρέθηκε επιτυχώς. - + Macro could not be removed. Η μακροεντολή δεν μπορεί να αφαιρεθεί. - + Unable to download addon list. Δεν είναι δυνατή η λήψη λίστας πρόσθετων. - + Workbenches list was updated. Ενημερώθηκε η λίστα πάγκων εργασίας. - + Outdated GitPython detected, consider upgrading with pip. Ανιχνεύθηκε ξεπερασμένη έκδοση GitPython, εξετάστε το ενδεχόμενο αναβάθμισης με το pip. - + List of macros successfully retrieved. Η λίστα μακροεντολών ανακτήθηκε επιτυχώς. - + Retrieving description... Ανάκτηση περιγραφής... - + Retrieving info from Ανάκτηση πληροφοριών από - + An update is available for this addon. Υπάρχει διαθέσιμη ενημέρωση για αυτό το πρόσθετο. - + This addon is already installed. Αυτό το πρόσθετο είναι ήδη εγκατεστημένο. - + Retrieving info from git Ανάκτηση πληροφοριών από το git - + Retrieving info from wiki Ανάκτηση πληροφοριών από το wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Η δικιά σας έκδοση της python δεν φαίνεται να υποστηρίζει αρχεία ZIP. Δεν είναι δυνατή η συνέχιση. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ο πάγκος εργασίας εγκαταστάθηκε επιτυχώς. Παρακαλώ επανεκκινήστε το FreeCAD για να εφαρμόσετε τις αλλαγές. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Βρέθηκαν κάποια σφάλματα που εμποδίζουν την εγκατάσταση αυτού του πάγκου εργασίας - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Σφάλμα: Δεν είναι δυνατή η λήψη - + Successfully installed Επιτυχής εγκατάσταση - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Εγκατεστημένο - + Update available Update available - + Restart required Απαιτείται επανεκκίνηση - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index 4e72375887..fe352d7a61 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicación de la instalación @@ -22,257 +22,257 @@ No se puede recuperar una descripción para esta macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Los complementos que se pueden instalar aquí no son oficialmente parte de FreeCAD, y no han sido revisados por el equipo de FreeCAD. ¡Asegúrese de que sabe lo que está instalando! - + Addon manager Administrador de complementos - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Debe reiniciar FreeCAD para que los cambios surtan efecto. Pulse Ok para reiniciar FreeCAD ahora, o Cancelar para reiniciar más tarde. - + Checking for updates... Buscando actualizaciones... - + Apply Aplicar - + update(s) actualización(es) - + No update available Ninguna actualización disponible - + Macro successfully installed. The macro is now available from the Macros dialog. Macro instalado correctamente. La macro está disponible ahora en el diálogo Macros. - + Unable to install No se puede instalar - + Addon successfully removed. Please restart FreeCAD Complemento eliminado correctamente. Reinicia FreeCAD - + Unable to remove this addon No se puede eliminar este complemento - + Macro successfully removed. Macro eliminado correctamente. - + Macro could not be removed. No se pudo quitar el Macro. - + Unable to download addon list. No se puede descargar la lista de complementos. - + Workbenches list was updated. Lista de entornos de trabajo actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considere actualizar con pip. - + List of macros successfully retrieved. La lista de macros fue recuperada con éxito. - + Retrieving description... Recuperando la descripción... - + Retrieving info from Recuperando información de - + An update is available for this addon. Una actualización está disponible para este complemento. - + This addon is already installed. Este complemento ya está instalado. - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de wiki - + GitPython not found. Using standard download instead. GitPython no encontrado. Utilizando descarga estándar en su lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Su versión de python no parece ser compatible con archivos ZIP. No es posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El entorno de trabajo se ha instalado correctamente. Reinicie FreeCAD para aplicar los cambios. - + Missing workbench Falta el entorno de trabajo - + Missing python module Falta módulo python - + Missing optional python module (doesn't prevent installing) Falta módulo opcional de python (no impide la instalación) - + Some errors were found that prevent to install this workbench Se han encontrado algunos errores que impiden instalar este entorno de trabajo - + Please install the missing components first. Por favor, instale los componentes que faltan primero. - + Error: Unable to download Error: No se puede descargar - + Successfully installed Se ha instalado correctamente - + GitPython not installed! Cannot retrieve macros from git ¡GitPython no instalado! No se pueden recuperar macros desde git - + Installed Instalado - + Update available Actualización disponible - + Restart required Es necesario reiniciar - + This macro is already installed. Esta macro ya está instalada. - + A macro has been installed and is available under Macro -> Macros menu Una macro ha sido instalada y está disponible en el menú Macro -> Macros - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto generalmente significa que ya no está mantenido, y algún complemento más avanzado en esta lista proporciona la misma funcionalidad. - + Error: Unable to locate zip from Error: No se puede localizar zip desde - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo salió mal con la recuperación de instrucciones de Git, posiblemente el ejecutable de Git no está en la ruta - + This addon is marked as Python 2 Only Este complemento está marcado solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de trabajo ya no se mantiene, instalarlo en un sistema con Python 3 probablemente provocará errores al ejecutarse o utilizarse. - + User requested updating a Python 2 workbench on a system running Python 3 - El usuario solicita actualizar un banco de trabajo con Python 2 en un sistema que ejecuta Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Banco de trabajo actualizado con éxito. Reinicie FreeCAD para aplicar los cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - El usuario solicita instalar un banco de trabajo Python 2 en un sistema que ejecuta Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece ser un problema al conectarse a la Wiki, por lo tanto no puede recuperar la lista de macros del Wiki en este momento - + Raw markdown displayed Markdown sin procesar mostrado - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 17e644b8cf..b4d8758f42 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Instalatutako kokapena @@ -22,257 +22,257 @@ Ezin izan da makro honen deskribapen bat eskuratu. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Hemen instalatu daitezkeen makroak ez dira FreeCADen makro ofizialak eta FreeCAD taldeak ez ditu gainbegiratzen. Ziurtatu badakizula zer ari zaren instalatzen! - + Addon manager Gehigarrien kudeatzailea - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. FreeCAD berrabiarazi behar da aldaketak indarrean sartu daitezen. Sakatu 'Ados' FreeCAD orain berrabiarazteko edo 'Utzi' geroago berrabiarazteko. - + Checking for updates... Eguneraketak bilatzen... - + Apply Aplikatu - + update(s) eguneraketa - + No update available Ez dago eguneraketarik eskuragarri - + Macro successfully installed. The macro is now available from the Macros dialog. Makroa ongi instalatu da. Orain makroa erabilgarri dago 'Makroak' elkarrizketa-koadroan. - + Unable to install Ezin izan da instalatu - + Addon successfully removed. Please restart FreeCAD Gehigarria ongi kendu da. Berrabiarazi FreeCAD - + Unable to remove this addon Ezin izan da gehigarri hau kendu - + Macro successfully removed. Makroa ongi kendu da. - + Macro could not be removed. Makroa ezin izan da kendu. - + Unable to download addon list. Ezin izan da gehigarrien zerrenda deskargatu. - + Workbenches list was updated. Lan-mahaien zerrenda eguneratu da. - + Outdated GitPython detected, consider upgrading with pip. GitPython zaharkitua detektatu da, eguneratu ezazu pip bidez. - + List of macros successfully retrieved. Makroen zerrenda ongi atzitu da. - + Retrieving description... Deskribapena atzitzen... - + Retrieving info from Informazioa berreskuratzen hemendik - + An update is available for this addon. Eguneraketa bat eskuragarri dago gehigarri honetarako. - + This addon is already installed. Gehigarri hau instalatuta dago. - + Retrieving info from git Informazioa atzitzen git biltegitik - + Retrieving info from wiki Informazioa atzitzen wikitik - + GitPython not found. Using standard download instead. GitPython ez da aurkitu. Deskarga estandarra erabiltzen. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Badirudi zure Python bertsioak ez duela ZIP fitxategirik onartzen. Ezin da jarraitu. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Lan-mahaia ongi instalatu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + Missing workbench Lan-mahaia falta da - + Missing python module Python modulua falta da - + Missing optional python module (doesn't prevent installing) Aukerako Python modulua falta da (ez du instalazioa eragozten) - + Some errors were found that prevent to install this workbench Lan-mahai hau instalatzea eragozten duten zenbait errore aurkitu dira - + Please install the missing components first. Instalatu falta diren osagaiak. - + Error: Unable to download Errorea: Ezin da deskargatu - + Successfully installed Ongi instalatu da - + GitPython not installed! Cannot retrieve macros from git GitPython ez dago instalatuta! Ezin dira makroak atzitu git biltegitik - + Installed Instalatuta - + Update available Eguneraketa eskuragarri - + Restart required Berrabiaraztea beharrezkoa da - + This macro is already installed. Makro hau instalatuta dago. - + A macro has been installed and is available under Macro -> Macros menu Makro bat instalatu da eta 'Makroa -> Makroak' menuan erabilgarri dago - + This addon is marked as obsolete Gehigarri hau zaharkituta dago - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Horrek esan nahi du ez dela mantentzen eta zerrenda honetako gehigarri aurreratuagoren batek funtzionaltasun bera eskaintzen duela. - + Error: Unable to locate zip from Errorea: Ezin izan da ZIP fitxategia aurkitu - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Zerbait gaizki atera da Git makroak atzitzean, ziur aski Git exekutagarria ez dago bidean - + This addon is marked as Python 2 Only Gehigarri hau Python 2 bertsiorako soilik da - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Lan-mahai honek beharbada ez du jadanik mantenimendurik eta Python 3 duen sistema batean instalatzen bada erroreak sortu ditzake bai abioan bai erabiltzen ari denean. - + User requested updating a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat eguneratzea eskatu du Python 3 duen sistema batean - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Lan-mahaia ongi eguneratu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + User requested installing a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat instalatzea eskatu du Python 3 duen sistema batean - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Badirudi arazo bat dagoela wikiarekin konektatzean, ezin da atzitu wikiko makroen zerrenda momentu honetan - + Raw markdown displayed Markdown gordina bistaratzen ari da. - + Python Markdown library is missing. Python Markdown liburutegia falta da. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index 0ae0ca3c6a..4e4f2c0b9a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Asennettu sijainti @@ -22,257 +22,257 @@ Kuvausta tälle makrolle ei voitu noutaa. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Lisäosat, jotka voidaan asentaa täällä, eivät ole virallisesti osa FreeCAD: iä, eikä niitä ole tarkistettu FreeCAD tiimissä. Varmista, että tiedät mitä olet asentamassa! - + Addon manager Lisäosien Hallinta - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Sinun on käynnistettävä FreeCAD uudelleen, jotta muutokset tulevat voimaan. Paina Ok käynnistäksesi FreeCAD nyt, tai Peruuta käynnistääksesi myöhemmin uudelleen. - + Checking for updates... Tarkistetaan päivityksiä... - + Apply Käytä - + update(s) päivitykset - + No update available Päivityksiä ei saatavana - + Macro successfully installed. The macro is now available from the Macros dialog. Makro asennettu onnistuneesti. Makro on nyt saatavilla Macko- ikkunasta. - + Unable to install Ei voi asentaa - + Addon successfully removed. Please restart FreeCAD Lisäosa poistettu. Käynnistä FreeCAD uudelleen - + Unable to remove this addon Lisäosaa ei voida poistaa - + Macro successfully removed. Makro poistettu onnistuneesti. - + Macro could not be removed. Makroa ei voitu poistaa. - + Unable to download addon list. Lisäosien luetteloa ei voida ladata. - + Workbenches list was updated. Työpöytien luettelo on päivitetty. - + Outdated GitPython detected, consider upgrading with pip. Vanhentunut GitPython havaittu, harkitse päivitystä pip: n kanssa. - + List of macros successfully retrieved. Luettelo makroista noudettu. - + Retrieving description... Haetaan kuvausta... - + Retrieving info from Haetaan tietoja - + An update is available for this addon. Päivitys on saatavilla tälle lisäosalle. - + This addon is already installed. Tämä lisäosa on jo asennettu. - + Retrieving info from git Haetaan tietoja git: stä - + Retrieving info from wiki Haetaan tietoja wikistä - + GitPython not found. Using standard download instead. GitPythonia ei löytynyt. Käytetään sen sijaan standardilatausta. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sinun versiota pythonista ei ' löydy tukeakseen ZIP tiedostoja. Ei voida edetä. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + Missing workbench Työpöytä puuttuu - + Missing python module Python moduuli puuttuu - + Missing optional python module (doesn't prevent installing) Valinnainen python-moduuli puuttuu (se ' estää asennuksen) - + Some errors were found that prevent to install this workbench Joitakin virheitä havaittiin, mikä estää tämän työpöydän asentamisen - + Please install the missing components first. Asenna ensin puuttuvat komponentit. - + Error: Unable to download Virhe: Lataaminen epäonnistui - + Successfully installed Asennettu onnistuneesti - + GitPython not installed! Cannot retrieve macros from git GitPythonia ei ole asennettu! Makroja ei voi noutaa git: stä - + Installed Asennettu - + Update available Päivitys saatavilla - + Restart required Uudelleenkäynnistys vaaditaan - + This macro is already installed. Tämä makro on jo asennettu. - + A macro has been installed and is available under Macro -> Macros menu Makro on asennettu ja se on saatavilla makro -> Makro -valikosta - + This addon is marked as obsolete Tämä lisäosa on merkitty vanhentuneeksi - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Tämä tarkoittaa yleensä sitä, että sitä ei enää ylläpidetä ja että tässä luettelossa on edistyneempiä lisäosia, mitkä tekevät saman toiminnallisuuden. - + Error: Unable to locate zip from Virhe: Zip -tiedostoa ei voitu paikantaa - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Jotain meni pieleen Git Makron noutamisessa, ehkä Git-ohjelma ei ole polulla - + This addon is marked as Python 2 Only Tämä lisäosa on merkitty vain Python 2: lle - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tätä työpöytää ei voida enää ylläpitää ja sen asentaminen Python 3 -järjestelmään johtaa todennäköisemmin virheisiin käynnistyksessä tai käytön aikana. - + User requested updating a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän päivittämistä Python 3 -järjestelmään - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + User requested installing a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän asentamista Python 3 -järjestelmässä - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Näyttää siltä, että kyseessä on Wikiin yhdistämiseen liittyvä ongelma, joten Wiki makro -listaa ei voida hakea tällä hetkellä - + Raw markdown displayed Raw Markdown (muokkaamaton) näytetään - + Python Markdown library is missing. Python Markdown kirjasto puuttuu. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts index 7d2306617d..3aa1393246 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Checking for updates... - + Apply Apply - + update(s) update(s) - + No update available No update available - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Unable to install - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon Unable to remove this addon - + Macro successfully removed. Macro successfully removed. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm index 69d23c792a..b148bd46b4 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index cb91bcb3b0..67e0d5754a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Emplacement installé @@ -22,257 +22,257 @@ Impossible de retrouver la description de cette macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - Les addons que peuvent être installés ici ne font pas partie de FreeCAD, et ne sont pas officiellement approuvés par l'équipe de FreeCAD. Assurez-vous de savoir ce que vous installez ! + Les extensions qui peuvent être installées ici ne font pas partie de FreeCAD, et ne sont pas officiellement approuvées par l'équipe de FreeCAD. Assurez-vous de savoir ce que vous installez ! - + Addon manager Gestionnaire de Greffons - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Vous devez redémarrer FreeCAD pour que les changements prennent effet. Appuyez sur Ok pour redémarrer FreeCAD maintenant, ou Annuler pour redémarrer plus tard. - + Checking for updates... Recherche de mises à jour... - + Apply Appliquer - + update(s) mise(s) à jour - + No update available Aucune mise à jour disponible - + Macro successfully installed. The macro is now available from the Macros dialog. Macro installée avec succès. Elle est maintenant disponible dans le menu Macro. - + Unable to install Impossible d'installer - + Addon successfully removed. Please restart FreeCAD Addon installé avec succès. Veuillez redémarrer FreeCAD - + Unable to remove this addon Impossible de désinstaller ce greffon - + Macro successfully removed. Macro désinstallée avec succès. - + Macro could not be removed. La macro n'a pas pu être désinstallée. - + Unable to download addon list. Impossible de télécharger la liste des greffons. - + Workbenches list was updated. La liste des ateliers a été mise à jour. - + Outdated GitPython detected, consider upgrading with pip. La version de GitPython est obsolète, envisagez de mettre à jour avec pip. - + List of macros successfully retrieved. Liste des macros récupérée avec succès. - + Retrieving description... Récupération de la description... - + Retrieving info from Récupération des informations de - + An update is available for this addon. Une mise à jour est disponible pour ce greffon. - + This addon is already installed. Ce greffon est déjà installé. - + Retrieving info from git Récupération des informations depuis git - + Retrieving info from wiki Récupération des informations depuis le wiki - + GitPython not found. Using standard download instead. GitPython est introuvable. Utilisation du téléchargement standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Votre version de Python semble ne pas supporter les fichiers ZIP. Impossible de continuer. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Atelier installé avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + Missing workbench Atelier manquant - + Missing python module Module Python manquant - + Missing optional python module (doesn't prevent installing) Un module Python optionnel est manquant (mais n'empêche pas l'installation) - + Some errors were found that prevent to install this workbench Des erreurs sont survenues et empêchent l'installation de cet atelier - + Please install the missing components first. Veuillez d'abord installer les composants manquants. - + Error: Unable to download Erreur : impossible de télécharger - + Successfully installed Installation réussie - + GitPython not installed! Cannot retrieve macros from git GitPython n'est pas installé. Impossible de récupérer les macros depuis git - + Installed Installé - + Update available Mise à jour disponible - + Restart required Redémarrage requis - + This macro is already installed. Cette macro est déjà installée. - + A macro has been installed and is available under Macro -> Macros menu Une macro a été installée et est disponible dans le menu Macro -> Macros - + This addon is marked as obsolete Ce greffon est marqué comme obsolète - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Cela signifie généralement qu'il n'est plus maintenu, et que d'autres greffons plus perfectionnés proposant les mêmes fonctionnalités sont disponibles. - + Error: Unable to locate zip from Erreur: Impossible de localiser le zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Une erreur s'est produite lors de la Récupération de Macro Git, peut-être que l'exécutable Git n'est pas dans le chemin d'accès - + This addon is marked as Python 2 Only Cet addon est indiqué pour Python 2 uniquement - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Cet atelier peut ne plus être maintenu et l'installer sur un système Python 3 entraînera très probablement des erreurs au démarrage ou en cours d'utilisation. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé la mise à jour d'un atelier Python 2 sur un système Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Atelier mis à jour avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé l'installation d'un atelier Python 2 sur un système exécutant Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Il semble y avoir un problème de connexion au Wiki, la liste des macros du Wiki ne peut donc pas être récupérée pour le moment - + Raw markdown displayed Affichage du Markdown brut - + Python Markdown library is missing. La bibliothèque Python Markdown est manquante. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index d183a9c23f..c2add8662a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localización da instalación @@ -22,257 +22,257 @@ Imposible recuperar a descrición para esta macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! As addons que se poden instalar aqui non son parte oficial de FreeCAD, e non son revisadas polo equipo de FreeCAD. Está certo de que sabes o que estás instalando! - + Addon manager Xestor de complementos - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Tes que reiniciar FreeCAD para que os trocos teñan efecto. Preme Ok para reiniciar FreeCAD agora, ou Cancelar para reiniciar despois. - + Checking for updates... Comprobando actualizacións... - + Apply Aplicar - + update(s) actualización(s) - + No update available Sen actualización dispoñible - + Macro successfully installed. The macro is now available from the Macros dialog. Macro instalada correctamente. A macro está agora dispoñible dende o diálogo macros. - + Unable to install Non se pode instalar - + Addon successfully removed. Please restart FreeCAD Complemento correctamente eliminado. Fai o favor de reiniciar FreeCAD - + Unable to remove this addon Non se pode eliminar este addon - + Macro successfully removed. Eliminouse a macro correctamente. - + Macro could not be removed. Non se puido eliminar a macro. - + Unable to download addon list. Non se pode descargar a lista de complementos. - + Workbenches list was updated. A lista de bancos de traballo foi actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considera actualizar con pip. - + List of macros successfully retrieved. Lista de macros recuperada con éxito. - + Retrieving description... Recuperando descrición... - + Retrieving info from Recuperando información dende - + An update is available for this addon. Unha actualización está dispoñible para este engadido. - + This addon is already installed. Este engadido xa está instalado. - + Retrieving info from git Recuperando información dende git - + Retrieving info from wiki Recuperando información dende wiki - + GitPython not found. Using standard download instead. GitPython non atopado. Utilizando descarga estándard no seu lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A túa versión de python non parece ser compatible con ficheiros ZIP. Non é posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. O banco de traballo instalado correctamente. Fai o favor de reiniciar FreeCAD para aplicar os trocos. - + Missing workbench Perdido banco de traballo - + Missing python module Perdido módulo python - + Missing optional python module (doesn't prevent installing) Módulo python opcional perdido (non impide a instalación) - + Some errors were found that prevent to install this workbench Algúns erros atopados que impiden instalar este banco de traballo - + Please install the missing components first. Fai o favor de instalar os compoñentes que falta primeiro. - + Error: Unable to download Erro: A descarga non vai - + Successfully installed Instalado con éxito - + GitPython not installed! Cannot retrieve macros from git GitPyton non instalado! Non se pode recuperar macros dende o git - + Installed Instalado - + Update available Actualización dispoñible - + Restart required Require reinicio - + This macro is already installed. Esta macro xa está instalada. - + A macro has been installed and is available under Macro -> Macros menu Unha macro foi instalada e está dispoñible baixo o menú Macros Macro -> - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto xeralmente significa que xa non é mantido, e algún complemento máis avanzado nesta lista provén a mesma funcionalidade. - + Error: Unable to locate zip from Erro: non se puido localizar o zip dende - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo saíu mal coa recuperación de macros de Git, posiblemente o executable de Git non está na ruta - + This addon is marked as Python 2 Only Este complemento está marcado soamente como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de traballo xa non se mantén e instalalo nun sistema con Python 3 probablemente provoque erros ó iniciarse ou ó usarse. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuario solicitou actualizar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. O banco de traballo actualizouse correctamente. Reinicie FreeCAD para aplicar os cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuario solicitou instalar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece que hai un problema ó conectarse á Wiki, polo tanto non se pode recuperar a lista de macros da Wiki neste momento - + Raw markdown displayed Mostrando Markdown sen procesar - + Python Markdown library is missing. Falta a biblioteca Markdown de Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index 1f0afbd370..172ac29b9e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mjesto instaliranja @@ -22,263 +22,263 @@ Neuspijeli pokušaj dohvaćanja opisa ove makro naredbe. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Dodaci koji se ovdje mogu instalirati nisu službeni dio FreeCAD programa, i nisu ispitani od FreeCAD tima. Budite sigurni da znate što će se instalirati! - + Addon manager Upravitelj dodataka - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Morate ponovo pokrenuti FreeCAD da bi promjene stupile na snagu. Pritisnite OK za ponovno pokretanje programa FreeCAD sada ili Odustani za kasnije ponovno pokretanje. - + Checking for updates... Provjeri ima li ažuriranja... - + Apply Primijeni - + update(s) ažuriranje(a) - + No update available Nema dostupnih ažuriranja - + Macro successfully installed. The macro is now available from the Macros dialog. Makro je uspješno instaliran. Makronaredba je sada dostupna iz dijaloškog okvira Makronaredbe. - + Unable to install Nije moguće instaliratii - + Addon successfully removed. Please restart FreeCAD Dodatak uspješno uklonjen. Molimo ponovo pokrenite FreeCAD - + Unable to remove this addon Nije moguće ukloniti dodatak - + Macro successfully removed. Makro je uspješno uklonjen. - + Macro could not be removed. Nije moguće ukloniti Makro. - + Unable to download addon list. Nije moguće preuzeti popis dodataka. - + Workbenches list was updated. Popis radnih površina je ažuriran. - + Outdated GitPython detected, consider upgrading with pip. Otkriven je zastarjeli GitPython, razmislite o nadogradnji s pip. - + List of macros successfully retrieved. Popis makronaredbi uspješno je dohvaćen. - + Retrieving description... Dohvaćanje opisa... - + Retrieving info from Dohvaćanje informacije od - + An update is available for this addon. Dostupno ažuriranje za ovaj dodatak. - + This addon is already installed. Ovaj dodatak je već instaliran. - + Retrieving info from git Dohvaćanje informacije od git - + Retrieving info from wiki Dohvaćanje informacije od wiki-a - + GitPython not found. Using standard download instead. GitPython nije pronađen. Upotreba standardnog preuzimanja. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaša verzija python-a ne podržava ZIP datoteke. Nije moguće nastaviti. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Radna površina je uspješno instalirana. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + Missing workbench Nedostaje radna površina - + Missing python module Nedostaje python modul - + Missing optional python module (doesn't prevent installing) Nedostaje neobvezan python modul (neće se spriječiti instalacija) - + Some errors were found that prevent to install this workbench Pronađene su neke pogreške koje sprečavaju instalaciju ove radne površine - + Please install the missing components first. Prvo instalirajte nedostajuće dijelove. - + Error: Unable to download Greška: Ne mogu preuzeti - + Successfully installed Uspješno instaliran - + GitPython not installed! Cannot retrieve macros from git GitPython se nije instalirao! Ne mogu se dohvatiti makronaredbe iz git-a - + Installed Instalirano - + Update available Dostupno ažuriranje - + Restart required Potrebno je ponovo pokretanje - + This macro is already installed. Ova makronaredba je već instalirana. - + A macro has been installed and is available under Macro -> Macros menu Makronaredba je instalirana i dostupna je pod Makro -> Makros-Izborniku - + This addon is marked as obsolete Ovaj dodatak je označen kao zastario - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obično znači da se više ne održava, a neki napredniji dodatak na ovom popisu pruža istu funkciju. - + Error: Unable to locate zip from Greška: Nije moguće locirati zip od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Nešto je pošlo po zlu s dohvaćanjem Git Macro-a, možda Git izvršni program nije u poveznici - + This addon is marked as Python 2 Only Taj je dodatak označen samo za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Ova radna ploča se više ne može održavati i instaliranje na Python 3 sustav vjerojatno će rezultirati pogreškama pri pokretanju ili tijekom upotrebe. - + User requested updating a Python 2 workbench on a system running Python 3 - Korisnik je zatražio ažuriranje radne površine Python 2 na sustavu koji pokreće Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench je uspješno ažuriran. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + User requested installing a Python 2 workbench on a system running Python 3 - Korisnik je zatražio instaliranje radne stanice Python 2 na sustav koji radi s Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Čini se da je problem povezivanje s Wiki-em, stoga trenutačno ne može dohvatiti popis makronaredbi Wiki-a - + Raw markdown displayed Prikazan čisti markdown kod - + Python Markdown library is missing. Nedostaje Python Markdown biblioteka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index 847cd9ffa2..bdbbe6deb3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Telepített hely @@ -22,257 +22,257 @@ Nem olvasható be a makró leírása. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Az itt telepíthető bővítmények hivatalosan nem részei a FreeCAD-nek, és azokat nem vizsgáljfelül a FreeCAD csapata. Győződjön meg róla, hogy ismeri, amit telepíteni akar! - + Addon manager Kiegészítők kezelője - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. A módosítások érvénybe léptetéséhez újra kell indítania a FreeCAD programot. A FreeCAD újraindításához nyomja meg az Ok gombot, vagy a Mégse gombra indítsa újra később. - + Checking for updates... Frissítés keresése... - + Apply Alkalmaz - + update(s) frissítés(ek) - + No update available Nem érhető el frissítés - + Macro successfully installed. The macro is now available from the Macros dialog. A makró telepítése sikeresen megtörtént. A makró már elérhető a makrók párbeszédpanelről. - + Unable to install Nem telepíthető - + Addon successfully removed. Please restart FreeCAD Az kiegészítő sikeresen eltávolítva. Indítsa újra a FreeCAD - + Unable to remove this addon A kiegészítő eltávolítása nem lehetséges - + Macro successfully removed. Makró sikeresen törölve. - + Macro could not be removed. Makró eltávolítása sikertelen. - + Unable to download addon list. A kiegészítő letöltése sikertelen. - + Workbenches list was updated. A munkafelületek listája frissítve. - + Outdated GitPython detected, consider upgrading with pip. Elavult GitPython észlelve, fontolja meg a frissítés a pip-el. - + List of macros successfully retrieved. A sikeresen beolvasott makrók listája. - + Retrieving description... Leírások lekérdezése... - + Retrieving info from Információ beolvasása ettől - + An update is available for this addon. Ehhez a kiegészítőhöz egy frissítés érhető el. - + This addon is already installed. Ez a kiegészítő már telepítve van. - + Retrieving info from git Információ beolvasása git-ből - + Retrieving info from wiki Információ beolvasása wiki-ből - + GitPython not found. Using standard download instead. GitPython nem található. Szokásos letöltési hely használata. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A Python verziója úgy tűnik, nem támogatja a zip fájlokat. Nem folytatható. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Munkafelület sikeresen telepítve. A változtatások alkalmazásához indítsa újra a FreeCAD programot. - + Missing workbench Hiányzó munkafelület - + Missing python module Hiányzó python modul - + Missing optional python module (doesn't prevent installing) Hiányzó kiegészítő python modul (nem állítja meg a telepítése) - + Some errors were found that prevent to install this workbench Néhány hibát talált, amely megakadályozza, hogy telepítse ezt a munkafelületet - + Please install the missing components first. Kérem először telepítse a hiányzó összetevőket. - + Error: Unable to download Hiba: Nem lehet letölteni - + Successfully installed Sikeresen telepítve - + GitPython not installed! Cannot retrieve macros from git GitPython nincs telepítve! Nem olvashatók be a makrók a git-ből - + Installed Telepítve - + Update available Frissítés elérhető - + Restart required Újraindítás szükséges - + This macro is already installed. Ez a makró már telepítve van. - + A macro has been installed and is available under Macro -> Macros menu A makró telepítve van, és elérhető a Makró -> Makrók menüben - + This addon is marked as obsolete Ez a bővítmény elavultként jelölt - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Ez általában azt jelenti, hogy már nem tartják karban, és a lista néhány fejlettebb bővítménye ugyanazokat a funkciókat nyújtja. - + Error: Unable to locate zip from Hiba: Nem található a zip formátum - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Valami elromlott a Git makró visszakeresésnél, esetleg a futtatható Git nincs az elérési úton - + This addon is marked as Python 2 Only Ez a bővítmény csak Python 2-ként van megjelölve - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Előfordulhat, hogy ez a munkafelület már nem karbantartható, és a Python 3 rendszerre való telepítése több mint valószínű, hogy hibákat fog eredményezni indításkor vagy használat közben. - + User requested updating a Python 2 workbench on a system running Python 3 - A felhasználó egy Python 2 munkaterület frissítését kérte egy Python 3-at futtató rendszeren - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. A munkaterület frissítése sikeresen megtörtént. A módosítások alkalmazásához indítsa újra a FreeCAD programot. - + User requested installing a Python 2 workbench on a system running Python 3 - A felhasználó python 2 munkafelület telepítését kérte egy Python 3-at futtató rendszeren - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Úgy tűnik, hogy a wikihez való kapcsolódási probléma, ezért jelenleg nem lehet beolvasni a Wiki makrólistát - + Raw markdown displayed Nyers leíró megjelenítése - + Python Markdown library is missing. Python leíró könyvtár hiányzik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index 6869dcc697..5e58a84fa5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Lokasi pemasangan @@ -22,257 +22,257 @@ Tidak dapat mengambil deskripsi untuk makro ini. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! AddOn yang dapat diinstal di sini bukan bagian resmi dari FreeCAD dan tidak ditinjau oleh tim FreeCAD. Pastikan Anda tahu betul AddOn yang Anda instal! - + Addon manager Manajer addon - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Anda harus memulai ulang FreeCAD agar perubahan diterapkan. Tekan OK untuk memulai kembali FreeCAD sekarang atau Batal untuk memulai kembali nanti. - + Checking for updates... Memeriksa pembaruan... - + Apply Apply - + update(s) pembaruan - + No update available Tidak ada pembaruan yang tersedia - + Macro successfully installed. The macro is now available from the Macros dialog. Makro berhasil diinstal. Makro sekarang tersedia dari dialog makro. - + Unable to install Tidak dapat memasang - + Addon successfully removed. Please restart FreeCAD Addon berhasil dihapus. Silakan mulai kembali FreeCAD - + Unable to remove this addon Tidak dapat menghapus addon ini. - + Macro successfully removed. Makro berhasil di hapus - + Macro could not be removed. Makro tidak dapat dihapus. - + Unable to download addon list. Tidak dapat mengunduh daftar addon. - + Workbenches list was updated. Daftar meja kerja sudah diperbarui. - + Outdated GitPython detected, consider upgrading with pip. GitPython yang kedaluwarsa terdeteksi, pertimbangkan untuk meningkatkan dengan pip. - + List of macros successfully retrieved. Daftar makro berhasil diambil. - + Retrieving description... Mengambil deskripsi... - + Retrieving info from Mengambil info dari - + An update is available for this addon. Pembaruan tersedia untuk addon ini. - + This addon is already installed. Addon ini sudah diinstal. - + Retrieving info from git Mengambil info dari git - + Retrieving info from wiki Mengambil info dari wiki - + GitPython not found. Using standard download instead. GitPython tidak ditemukan. Sebaliknya, gunakan unduhan standar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versi python Anda tampaknya tidak mendukung file ZIP. Tidak dapat melanjutkan. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Meja kerja berhasil diinstal. Silakan mulai kembali FreeCAD untuk menerapkan perubahan. - + Missing workbench Meja kerja tidak ada - + Missing python module Modul python tidak ada - + Missing optional python module (doesn't prevent installing) Modul python opsional tidak ada (tidak mencegah penginstalan) - + Some errors were found that prevent to install this workbench Beberapa kesalahan ditemukan yang mencegah untuk menginstal meja kerja ini - + Please install the missing components first. Silakan instal komponen yang hilang terlebih dahulu. - + Error: Unable to download Kesalahan: Tidak dapat mengunduh - + Successfully installed Berhasil diinstal - + GitPython not installed! Cannot retrieve macros from git GitPython tidak diinstal! Tidak dapat mengambil makro dari git - + Installed Telah diinstal - + Update available Pembaruan tersedia - + Restart required Mulai ulang diperlukan - + This macro is already installed. Makro ini sudah diinstal. - + A macro has been installed and is available under Macro -> Macros menu Sebuah makro sudah diinstal dan tersedia di bawah menu Makro -> Makro - + This addon is marked as obsolete Addon ini ditandai sebagai usang - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Addon ini biasanya tidak lagi dipertahankan dan beberapa addon lebih canggih di daftar ini menyediakan fungsionalitas yang sama. - + Error: Unable to locate zip from Kesalahan: Tidak dapat menemukan zip dari - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Meja kerja ini tidak lagi diurus dan memasangnya pada sistem Python 3 mungkin akan lebih sering menyebabkan galat saat memulai atau saat menggunakan. - + User requested updating a Python 2 workbench on a system running Python 3 - Pengguna minta memperbaharui meja kerja Python 2 di sistem yang menjalankan Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Meja kerja berhasil diperbaharui. Tolong mulai ulang FreeCAD untuk menerapkan perubahan. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 75f6854311..d447f79d9e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Percorso di installazione @@ -22,257 +22,257 @@ Impossibile recuperare una descrizione per questa macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Gli addons che possono essere installati da qui non sono parte ufficiale di FreeCAD e non sono revisionati dal team FreeCAD. Accertarsi di sapere cosa si sta installando! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Per rendere effettive le modifiche è necessario riavviare FreeCAD. Premere Ok per riavviare FreeCAD ora, o Annulla per riavviare più tardi. - + Checking for updates... Controllo aggiornamenti... - + Apply Applica - + update(s) aggiornamento/i - + No update available Nessun aggiornamento disponibile - + Macro successfully installed. The macro is now available from the Macros dialog. Macro installata con successo. Ora la macro è disponibile dalla finestra di dialogo Macro. - + Unable to install Impossibile installare - + Addon successfully removed. Please restart FreeCAD Addon rimosso con successo. Si prega di riavviare FreeCAD - + Unable to remove this addon Impossibile rimuovere questo addon - + Macro successfully removed. Macro rimossa con successo. - + Macro could not be removed. Impossibile rimuovere la macro. - + Unable to download addon list. Impossibile scaricare la lista degli addon. - + Workbenches list was updated. Elenco degli ambienti di lavoro aggiornato. - + Outdated GitPython detected, consider upgrading with pip. Rilevato GitPython obsoleto, considerare di aggiornarlo con pip. - + List of macros successfully retrieved. Lista delle macro recuperata con successo. - + Retrieving description... Recupero descrizione... - + Retrieving info from Recupero informazioni da - + An update is available for this addon. Per questo addon è disponibile un aggiornamento. - + This addon is already installed. Questo addon è già installato. - + Retrieving info from git Recupero informazioni da git - + Retrieving info from wiki Recupero informazioni dal wiki - + GitPython not found. Using standard download instead. GitPython non trovato. In sostituzione, usare il download standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sembra che la versione di python non supporti i file ZIP. Impossibile procedere. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambiente di lavoro installato correttamente. Riavviare FreeCAD per applicare le modifiche. - + Missing workbench Ambiente di lavoro mancante - + Missing python module Modulo python mancante - + Missing optional python module (doesn't prevent installing) Modulo Python opzionale mancante (ma non impedisce l'installazione) - + Some errors were found that prevent to install this workbench Sono stati trovati alcuni errori che impediscono di installare questo ambiente di lavoro - + Please install the missing components first. Si prega di installare prima i componenti mancanti. - + Error: Unable to download Errore: download impossibile - + Successfully installed Installazione riuscita - + GitPython not installed! Cannot retrieve macros from git GitPython non installato! Impossibile recuperare la macro da git - + Installed Installato - + Update available Aggiornamento disponibile - + Restart required Riavvio richiesto - + This macro is already installed. Questa macro è già installata. - + A macro has been installed and is available under Macro -> Macros menu Una macro è stata installata ed è disponibile sotto Macro -> menu Macros - + This addon is marked as obsolete Questo addon è contrassegnato come obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Questo di solito significa che non è più mantenuto e alcuni addon in questa lista forniscono la stessa funzionalità. - + Error: Unable to locate zip from Errore: Impossibile individuare zip da - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Qualcosa è andato storto con il recupero della macro da Git, forse l'eseguibile Git non è nel percorso - + This addon is marked as Python 2 Only Questo componente aggiuntivo è contrassegnato come solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Questo ambiente potrebbe non essere più mantenuto e installarlo su un sistema Python 3 causerà probabilmente errori all'avvio o durante l'uso. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'aggiornamento di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambiente di lavoro aggiornato correttamente. Riavviare FreeCAD per applicare le modifiche. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'installazione di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembra esserci un problema di connessione al Wiki, quindi in questo momento non è possibile recuperare l'elenco delle macro - + Raw markdown displayed Visualizza il sorgente Markdown - + Python Markdown library is missing. Manca la libreria Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index 8a4b1be918..cacd26a989 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location インストール場所 @@ -22,257 +22,257 @@ このマクロについての説明を受信することができません。 - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! ここからインストールできますアドオンは、FreeCAD公式の一部ではないゆえにFreeCADチームによってレビューがなされていない。あなたが何をインストールしようとしているかを確認して下さい！ - + Addon manager アドオンマネージャー - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. 変更を反映するにはFreeCADを再起動する必要があります。今すぐFreeCADを再起動する場合はOKを、後で再起動する場合はキャンセルを押してください。 - + Checking for updates... アップデートを確認中… - + Apply 適用する - + update(s) アップデート - + No update available 利用可能なアップデートはありません - + Macro successfully installed. The macro is now available from the Macros dialog. マクロのインストールが成功しました。このマクロは、マクロダイアログよりすぐに利用できます。 - + Unable to install インストールできません - + Addon successfully removed. Please restart FreeCAD アドオンの削除が成功しました。FreeCADを再起動してください。 - + Unable to remove this addon このアドオンを削除できません - + Macro successfully removed. マクロを削除しました - + Macro could not be removed. マクロを削除できませんでした - + Unable to download addon list. アドオンの一覧をダウンロードできませんでした。 - + Workbenches list was updated. ワークベンチの一覧を更新しました。 - + Outdated GitPython detected, consider upgrading with pip. 古い GitPython が見つかりました。pip によるアップグレードを検討してください。 - + List of macros successfully retrieved. マクロの一覧を取り込むことに成功しました。 - + Retrieving description... 説明の取り込み中 - + Retrieving info from 情報を取り込み中 - + An update is available for this addon. このアドオンでアップデートが利用可能です。 - + This addon is already installed. このアドオンは既にインストールされています。 - + Retrieving info from git Gitからの情報を取り込み中 - + Retrieving info from wiki Wikiからの情報を取得しています - + GitPython not found. Using standard download instead. GitPythonが見つかりません。代わりに標準のダウンロードを使用しています。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 利用しているPythonのバージョンではZIPファイルをサポートしていないようです。ゆえに続行できません。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. ワークベンチのインストールが成功しました。 FreeCADを再起動して変更を有効にしてください。 - + Missing workbench ワークベンチが見当たりません - + Missing python module Pythonが見当たりません - + Missing optional python module (doesn't prevent installing) オプションのPythonモジュールが見つかりません(インストールは停止されません) - + Some errors were found that prevent to install this workbench エラーが発生したためこのワークベンチをインストールすることができません - + Please install the missing components first. 先ずは、見当たらないコンポーネントをインストールしてください。 - + Error: Unable to download エラー: ダウンロードできませんでした - + Successfully installed インストールが完了しました - + GitPython not installed! Cannot retrieve macros from git GitPythonがインストールされていませんでした！よってマクロをgitより取り戻すことができません - + Installed インストール済み - + Update available アップデートを利用できます - + Restart required 再起動が必要です - + This macro is already installed. このマクロは既にインストールされています。 - + A macro has been installed and is available under Macro -> Macros menu マクロがインストールされました。メニューのマクロ -> マクロから利用できます。 - + This addon is marked as obsolete このアドオンは非推奨に設定されています - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 通常はすでにメンテナンスがされていないことを意味します。このリストにあるさらに高度なアドオンが同じ機能を提供している場合があります。 - + Error: Unable to locate zip from エラー: ZIP ファイルを以下から配置できません。 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git マクロの取得に問題が発生しました。おそらく Git 実行ファイルがパス中にありません。 - + This addon is marked as Python 2 Only このアドオンは Python 2 専用として記されています - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. このワークベンチは保守されておらず、Python 3 システムにインストールすると起動時や使用中にエラーが発生する可能性が高くなります。 - + User requested updating a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチの更新を要求しました - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. ワークベンチの更新が成功しました。 FreeCADを再起動して変更を有効にしてください。 - + User requested installing a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチのインストールを要求しました - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wikiへの接続で問題が発生したため、現時点ではWikiのマクロリストを取得できません。 - + Raw markdown displayed 未加工のマークダウンを表示 - + Python Markdown library is missing. Python Markdown ライブラリがありません。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts index d6c5643ee8..89072874b5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Checking for updates... - + Apply Apply - + update(s) update(s) - + No update available No update available - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Unable to install - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon Unable to remove this addon - + Macro successfully removed. Macro successfully removed. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm index 60336573b4..7307c9cf19 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts index c950d14071..042a02cb02 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -4,9 +4,9 @@ AddonInstaller - + Installed location - Installed location + 설치 위치 @@ -14,7 +14,7 @@ Unable to fetch the code of this macro. - Unable to fetch the code of this macro. + 이 매크로의 코드를 가져올 수 없습니다. @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager 추가 기능 관리 - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. 추가기능을 사용하려면 FreeCAD를 재시작해야 합니다. 지금 바로 재시작하려면 OK버튼, 나중에 재시작하려면 취소버튼을 누르세요. - + Checking for updates... 업데이트 확인 중... - + Apply 적용 - + update(s) 업데이트 - + No update available 사용가능한 업데이트가 없습니다. - + Macro successfully installed. The macro is now available from the Macros dialog. 매크로가 설치되었습니다. 이제 매크로 창을 열어 사용할 수 있습니다. - + Unable to install 설치할 수 없습니다. - + Addon successfully removed. Please restart FreeCAD 추가기능이 제거되었습니다. FreeCAD를 다시 시작 해주세요. - + Unable to remove this addon 이 추가기능을 제거할 수 없습니다. - + Macro successfully removed. 매크로가 제거되었습니다. - + Macro could not be removed. 매크로를 제거할 수 없습니다. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. 작업대 목록이 갱신되었습니다. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. 이 추가기능을 업데이트 할 수 있습니다. - + This addon is already installed. 이 추가기능은 이미 설치되어 있습니다. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 설치완료.새로 추가한 작업대를 사용하려면 FreeCAD를 다시 시작하세요. - + Missing workbench - Missing workbench + 작업대 누락 - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 오류: 내려받을 수 없음 - + Successfully installed 설치 완료 - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed 설치됨 - + Update available 사용 가능한 업데이트가 있습니다 - + Restart required 다시 시작 필요 - + This macro is already installed. 이 매크로는 이미 설치되어 있습니다. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm index 68d521b8f0..bce90294c9 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts index 65cd8037cc..97a072a586 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Checking for updates... - + Apply Pritaikyti - + update(s) update(s) - + No update available No update available - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Unable to install - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon Unable to remove this addon - + Macro successfully removed. Macro successfully removed. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required - Restart required + Būtina paleisti iš naujo - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index 9365fcb89d..c96ae4e174 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Geïnstalleerde locatie @@ -22,257 +22,257 @@ De beschrijving van deze macro kan niet worden opgehaald. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! De addons die geïnstalleerd kunnen worden maken niet officiëel onderdeel uit van FreeCAD en zijn niet gereviewed door het FreeCad team. Zorg ervoor dat je weet wat je installeert! - + Addon manager Uitbreidingsmanager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Je moet FreeCAD opnieuw starten om de wijzigingen door te voeren. Klik Ok om FreeCAD nu opnieuw te starten, of Cancel om dit later te doen. - + Checking for updates... Zoeken naar updates... - + Apply Toepassen - + update(s) update(s) - + No update available Geen update beschikbaar - + Macro successfully installed. The macro is now available from the Macros dialog. Macro succesvol geïnstalleerd. De macro is nu beschikbaar via het Macros-venster. - + Unable to install Installeren niet mogelijk - + Addon successfully removed. Please restart FreeCAD Addon succesvol verwijderd. Herstart aub FreeCAD - + Unable to remove this addon Deze addon kan niet worden verwijderd - + Macro successfully removed. Macro succesvol verwijderd. - + Macro could not be removed. Macro kon niet worden verwijderd. - + Unable to download addon list. Addon lijst kan niet worden opgehaald. - + Workbenches list was updated. Werkbankenlijst is bijgewerkt. - + Outdated GitPython detected, consider upgrading with pip. Verouderde GitPython gevonden, overweeg een upgrade met pip. - + List of macros successfully retrieved. Lijst van macro's succesvol opgehaald. - + Retrieving description... Omschrijving ophalen... - + Retrieving info from Informatie ophalen vanaf - + An update is available for this addon. Er is een update beschikbaar voor deze addon. - + This addon is already installed. Deze addon is al geïnstalleerd. - + Retrieving info from git Informatie ophalen van git - + Retrieving info from wiki Informatie ophalen van wiki - + GitPython not found. Using standard download instead. GitPython niet gevonden. Standaard download wordt nu gebruikt. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Je versie van Python lijkt geen ZIP-bestanden te ondersteunen. Verder gaan niet mogelijk. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Werkbank succesvol geïnstalleerd. Herstart FreeCAD om de wijzigingen toe te passen. - + Missing workbench Werkbank ontbreekt - + Missing python module Ontbrekende python module - + Missing optional python module (doesn't prevent installing) Ontbrekende optionele python module (voorkomt niet het installeren) - + Some errors were found that prevent to install this workbench Er zijn enkele fouten gevonden die voorkomen dat deze werkbank wordt geïnstalleerd - + Please install the missing components first. Installeer eerst de ontbrekende componenten. - + Error: Unable to download Fout: Kan niet downloaden - + Successfully installed Succesvol geïnstalleerd - + GitPython not installed! Cannot retrieve macros from git GitPython niet geïnstalleerd! Macro's kunnen niet worden opgehaald van git - + Installed Geïnstalleerd - + Update available Update beschikbaar - + Restart required Opnieuw opstarten vereist - + This macro is already installed. Deze macro is al geïnstalleerd. - + A macro has been installed and is available under Macro -> Macros menu Een macro is geïnstalleerd en is beschikbaar onder Macro -> Macro' s menu - + This addon is marked as obsolete Deze uitbreiding is gemarkeerd als verouderd - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dit betekent gewoonlijk dat het niet meer onderhouden wordt, en een geavanceerdere uitbreidingen in deze lijst biedt dezelfde functionaliteit. - + Error: Unable to locate zip from Fout: Kan zip niet vinden vanuit - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Er is iets misgegaan met het ophalen van de Git Macro. Mogelijk bevindt het uitvoerbare Git-bestand zich niet in het pad - + This addon is marked as Python 2 Only Deze toevoeging is alleen geschikt voor Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Deze werkbank wordt wellicht niet langer onderhouden en de installatie ervan op een Python 3-systeem zal hoogstwaarschijnlijk leiden tot fouten bij het opstarten of tijdens het gebruik. - + User requested updating a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank bij te werken die alleen geschikt is voor Python 3 - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Werkbank succesvol bijgewerkt. Herstart FreeCAD om de wijzigingen toe te passen. - + User requested installing a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank te installeren op een systeem dat Python 3 draait - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Er lijkt een probleem te zijn met de verbinding met de Wiki, daarom kan de Wiki-macrolijst op dit moment niet worden opgehaald - + Raw markdown displayed Ongeformateerde tekst weergegeven - + Python Markdown library is missing. Python Markdown bibliotheek mist. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts index 6817b726dd..c4958b17db 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installasjonssted @@ -22,257 +22,257 @@ Kan ikke hente en beskrivelse for denne makroen. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Programtilleggene som kan installeres her, er ikke offisielt en del av FreeCAD, og er ikke vurdert av FreeCAD-teamet. Vær sikker på at du vet hva du installerer! - + Addon manager Håndterer for tilleggsmoduler - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Du må starte FreeCAD på nytt for at endringene skal tre i kraft. Trykk OK for å starte FreeCAD på nytt, eller Avbryt å starte på nytt senere. - + Checking for updates... Ser etter oppdateringer... - + Apply Bruk - + update(s) oppdatering(er) - + No update available Ingen oppdatering tilgjengelig - + Macro successfully installed. The macro is now available from the Macros dialog. Makro installert. Makroen er nå tilgjengelig i Makrodialogen. - + Unable to install Kunne ikke installere - + Addon successfully removed. Please restart FreeCAD Tillegg fjernet. Start FreeCAD på nytt - + Unable to remove this addon Kan ikke fjerne dette tillegget - + Macro successfully removed. Makroen er fjernet. - + Macro could not be removed. Makroen kunne ikke fjernes. - + Unable to download addon list. Kunne ikke laste ned liste over tilleggsmoduler. - + Workbenches list was updated. Liste over arbeidsbenker ble oppdatert. - + Outdated GitPython detected, consider upgrading with pip. Utdatert GitPython oppdaget, vurder oppgradering med pip. - + List of macros successfully retrieved. Makroliste hentet. - + Retrieving description... Henter beskrivelse... - + Retrieving info from Henter informasjon fra - + An update is available for this addon. En oppdatering er tilgjengelig for denne tilleggsmodulen. - + This addon is already installed. Denne tilleggsmoduler er allerede installert. - + Retrieving info from git Henter informasjon fra git - + Retrieving info from wiki Henter informasjon fra wiki - + GitPython not found. Using standard download instead. GitPython ble ikke funnet. Bruker standard nedlasting. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Den installerte versjonen av Python støtter ikke ZIP-filer. Kan ikke fortsette. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeidsbenken er installert. Start FreeCAD på nytt for at den skal bli tilgjengelig. - + Missing workbench Arbeidsbenken mangler - + Missing python module Python-modul mangler - + Missing optional python module (doesn't prevent installing) Python-modul mangler (hindrer ikke installering) - + Some errors were found that prevent to install this workbench Noen feil ble funnet som hindrer installering av denne arbeidsbenken - + Please install the missing components first. Vennligst installer manglende komponenter først. - + Error: Unable to download Feil: Kan ikke lastes ned - + Successfully installed Installert - + GitPython not installed! Cannot retrieve macros from git GitPython er ikke installert! Kan ikke hente makroer fra git - + Installed Installert - + Update available Oppdatering tilgjengelig - + Restart required Omstart nødvendig - + This macro is already installed. Denne makroen er allerede installert. - + A macro has been installed and is available under Macro -> Macros menu En makro er installert og er tilgjengelig under Makro -> Makroer menyen - + This addon is marked as obsolete Denne tilleggsmodulen er merket utdatert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dette betyr vanligvis at den ikke lenger vedlikeholdes og at andre mer avanserte tilleggsmoduler i denne listen gir samme funksjonalitet. - + Error: Unable to locate zip from Feil: Finner ikke zip-filen fra - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Noe gikk galt med Git Macro-nedlastingen, muligens er ikke Git lagt til søkestien - + This addon is marked as Python 2 Only Denne tilleggsmodulen er markert som kun for Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Denne arbeidsbenken vedlikeholdes ikke lenger og vil sannsynligvis gi problemer om den installeres på et system med Python 3. - + User requested updating a Python 2 workbench on a system running Python 3 - Brukeren forsøkte å oppdatere en arbeidsbenk for Python 2 på et system med Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeidsbenken er oppdatert. Start FreeCAD på nytt for å se endringene. - + User requested installing a Python 2 workbench on a system running Python 3 - Brukeren forsøkte å installer en arbeidsbenk for Python 2 på et system med Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Makrolisten fra Wiki kan ikke hentes, sannsynligvis på grunn av et tilkoblingsproblem - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index b0f4628f07..686f6a474e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Miejsce instalacji @@ -22,257 +22,257 @@ Nie można pobrać opisu makrodefinicji. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Dodatki, które mogą być zainstalowane, nie są oficjalnie częścią FreeCAD, i nie są sprawdzane przez zespół FreeCAD. Upewnij się, że wiesz, co instalujesz! - + Addon manager Menedżer dodatków - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Musisz zrestartować program FreeCAD, aby zmiany odniosły skutek. Naciśnij Ok, aby zrestartować FreeCAD teraz, lub Anuluj, aby zrestartować program później. - + Checking for updates... Sprawdzanie aktualizacji... - + Apply Zastosuj - + update(s) aktualizacja - + No update available Brak dostępnych aktualizacji - + Macro successfully installed. The macro is now available from the Macros dialog. Makro zostało pomyślnie zainstalowane. Jest teraz dostępne w oknie dialogowym Makrodefinicje. - + Unable to install Nie można zainstalować - + Addon successfully removed. Please restart FreeCAD Pomyślnie usunięto. Proszę zrestartować FreeCAD - + Unable to remove this addon Nie można usunąć tego dodatku - + Macro successfully removed. Makro zostało pomyślnie usunięte. - + Macro could not be removed. Nie można usunąć makra. - + Unable to download addon list. Nie można pobrać listy dodatków. - + Workbenches list was updated. Lista Środowisk pracy została zaktualizowana. - + Outdated GitPython detected, consider upgrading with pip. Wykryto przestarzały GitPython, rozważ aktualizację za pomocą programu pip. - + List of macros successfully retrieved. Pomyślnie pobrano listę makrodefinicji. - + Retrieving description... Pobieranie opisu... - + Retrieving info from Pobieranie informacji z - + An update is available for this addon. Aktualizacja jest dostępna dla tego dodatku. - + This addon is already installed. Ten dodatek jest już zainstalowany. - + Retrieving info from git Pobieranie informacji z git - + Retrieving info from wiki Pobieranie informacji z Wiki - + GitPython not found. Using standard download instead. Nie znaleziono GitPython. Zamiast tego użyto standardowego pobierania. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Twoja wersja Pythona nie' obsługuje plików ZIP. Nie można kontynuować. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Środowisko pracy zainstalowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + Missing workbench Nieistniejące Środowisko pracy - + Missing python module Nieistniejący moduł Pyton - + Missing optional python module (doesn't prevent installing) Brakuje opcjonalnego modułu Python (nie przeszkadza w instalacji) - + Some errors were found that prevent to install this workbench Znaleziono pewne błędy, które uniemożliwiają zainstalowanie tego środowiska - + Please install the missing components first. Proszę najpierw zainstalować brakujące komponenty. - + Error: Unable to download Błąd: Nie można pobrać - + Successfully installed Zainstalowano pomyślnie - + GitPython not installed! Cannot retrieve macros from git GitPython nie jest zainstalowany! Nie można pobrać makrodefinicji z git - + Installed Zainstalowano - + Update available Dostępna aktualizacja - + Restart required Wymagany restart - + This macro is already installed. Moduł jest już zainstalowany. - + A macro has been installed and is available under Macro -> Macros menu Makro zostało zainstalowane i jest dostępne w menu Macrodefinicji -> Menu makrodefinicji - + This addon is marked as obsolete Ten dodatek jest oznaczony jako przestarzały - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Oznacza to, że zazwyczaj nie jest on już utrzymywany, a niektóre bardziej zaawansowane dodatki z tej listy zapewniają tę samą funkcjonalność. - + Error: Unable to locate zip from Błąd: nie można znaleźć pliku Zip z - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Coś poszło nie tak z pobieraniem makr Git, prawdopodobnie plik wykonywalny Git nie występuje w podanej lokalizacjii - + This addon is marked as Python 2 Only Ten dodatek jest oznaczony tylko jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Te środowisko pracy nie może być dłużej utrzymywane, a zainstalowanie go w systemie Python 3 z dużym prawdopodobieństwem doprowadzi do błędów podczas uruchamiania lub podczas użytkowania. - + User requested updating a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zaktualizowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Środowisko pracy zaktualizowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + User requested installing a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zainstalowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wygląda na to, że występuje problem z połączeniem się z Wiki, dlatego nie można obecnie pobrać listy makrodefinicji dostępnej na Wiki - + Raw markdown displayed Wyświetlono surowy format markdown - + Python Markdown library is missing. Brakuje biblioteki Markdown środowiska Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index a0dfb3f649..ff94554895 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localização instalada @@ -22,257 +22,257 @@ Não é possível exibir uma descrição deste macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Os adicionais que podem ser instalados aqui não são, oficialmente, parte do FreeCAD e não foram revisados pelo time FreeCAD. Tenha certeza do que você esta instalando! - + Addon manager Gestor de Suplementos - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Reinicie o FreeCAD para que as mudanças tenham efeito. OK para reiniciar ou Cancelar para reiniciar mais tarde. - + Checking for updates... Verificando por atualizações... - + Apply Aplicar - + update(s) atualizar - + No update available Sem atualização disponível - + Macro successfully installed. The macro is now available from the Macros dialog. Macro instalada com sucesso. Estará disponível na caixa de diálogos Macro. - + Unable to install Incapaz de instalar - + Addon successfully removed. Please restart FreeCAD Extensão removida com sucesso. Reinicie o FreeCAD - + Unable to remove this addon Incapaz de remover este suplemento - + Macro successfully removed. Macro removida com êxito. - + Macro could not be removed. A macro não pode ser removida. - + Unable to download addon list. Incapaz de baixar a list de suplmentos. - + Workbenches list was updated. Lista de workbenches atualizada. - + Outdated GitPython detected, consider upgrading with pip. GitPython desatualizado detectado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros obtida com sucesso. - + Retrieving description... Recuperando descrição... - + Retrieving info from Recuperando informações de - + An update is available for this addon. Uma atualização para esta extensão está disponível. - + This addon is already installed. Esta extensão já está instalada. - + Retrieving info from git Recuperando informações do git - + Retrieving info from wiki Recuperando informações da wiki - + GitPython not found. Using standard download instead. GitPython não encontrado. Usando o download padrão em vez disso. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sua versão do python parece não suportar arquivos ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada. Reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho não localizada - + Missing python module Modulo Python não localizado - + Missing optional python module (doesn't prevent installing) Faltando módulo python opcional (não impede a instalação) - + Some errors were found that prevent to install this workbench Foram encontrados alguns erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, primeiro instale os componentes faltantes. - + Error: Unable to download Erro: Não foi possível baixar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não instalado! Não é possível recuperar macros do git - + Installed Instalado - + Update available Atualização Disponível - + Restart required Reinicialização necessária - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macros - + This addon is marked as obsolete Essa extensão está marcada como obsoleta - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isso geralmente significa que ela não é mais mantida, e outra extensão mais avançada nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo deu errado com o Git Macro Retrieval, possivelmente o executável Git não está no caminho - + This addon is marked as Python 2 Only Esta extensão é marcada como apenas para Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada não pode mais ser mantida e instalá-la em um sistema Python 3 irá mais do que provavelmente resultar em erros na inicialização ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuário solicitou a atualização de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada atualizada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuário solicitou a instalação de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema conectando ao Wiki, portanto não foi possível recuperar a lista de macros Wiki neste momento - + Raw markdown displayed Marcação bruta exibida - + Python Markdown library is missing. Biblioteca Python Markdown está faltando. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index e25c8bb002..b0a5232c77 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Caminho de instalação @@ -22,257 +22,257 @@ Não foi possível encontrar uma descrição para esta macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Os complementos que podem ser instalados aqui não fazem oficialmente parte do FreeCAD e não são revistos pela equipe do FreeCAD. Certifique-se que conhece o que está a instalar! - + Addon manager Gestor de extras - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Reinicie o FreeCAD para que as alterações tenham efeito. Ok para reiniciar ou Cancelar para reiniciar mais tarde. - + Checking for updates... A procurar atualizações... - + Apply Aplicar - + update(s) atualizar(s) - + No update available Sem atualizações disponíveis - + Macro successfully installed. The macro is now available from the Macros dialog. Macro instalada com sucesso. A macro está disponível na caixa de diálogo das Macros. - + Unable to install Impossível instalar - + Addon successfully removed. Please restart FreeCAD Extra removido com sucesso. Por favor, reinicie o FreeCAD - + Unable to remove this addon Não foi possível remover este extra - + Macro successfully removed. Macro removida com sucesso. - + Macro could not be removed. A macro não pode ser removida. - + Unable to download addon list. Incapaz de descarregar a lista de extras. - + Workbenches list was updated. A lista de Bancadas de Trabalho foi atualizada. - + Outdated GitPython detected, consider upgrading with pip. Detetado GitPython desactualizado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros atualizada com sucesso. - + Retrieving description... Obtendo descrição... - + Retrieving info from Obtendo informações de - + An update is available for this addon. Uma atualização está disponível para esse extra. - + This addon is already installed. Este extra já está instalado. - + Retrieving info from git Obtendo informações do git - + Retrieving info from wiki Obtendo informações da wiki - + GitPython not found. Using standard download instead. GitPython não foi encontrado. Em vez disso, será usado o descarregamento padrão. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A sua versão de python parece não suportar ficheiros ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho em falta - + Missing python module Módulo python em falta - + Missing optional python module (doesn't prevent installing) Módulo python opcional em falta (não impede instalação) - + Some errors were found that prevent to install this workbench Foram encontrados erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, instale os componentes em falta primeiro. - + Error: Unable to download Erro: Não foi possível descarregar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não está instalado! Não é possível descarregar macros do git - + Installed Instalado - + Update available Atualização disponível - + Restart required Reinicio necessário - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macro -> Macros - + This addon is marked as obsolete Este extra está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isto geralmente significa que já não é mantido, e algum extra mais atualizado nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo correu mal com a descarga da Macro do Git, possivelmente o executável Git não está no caminho especificado - + This addon is marked as Python 2 Only Este complemento é marcado apenas como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada de trabalho não pode mais ser mantida e instalá-la em um sistema Python 3 irá provavelmente resultar em erros no arranque ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizador solicitou atualização de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada de trabalho atualizada com sucesso. Por favor reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizador solicitou instalação de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema com a ligação à Wiki, portanto neste momento não é possível recuperar a lista Wiki de macros - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Falta biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index 37e84a63b8..358ce68c7a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Locația unde s-a efectuat instalarea @@ -22,257 +22,257 @@ Nu s-a putut găsi o descriere pentru acest macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Programele de tip addon ce pot fi instalate aici nu fac parte oficial din FreeCAD, și nu sunt revizionate de echipa FreeCAD. Asigurați-vă că programele instalate sunt sigure! - + Addon manager Manager de addon - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Trebuie să reporniți FreeCAD pentru ca modificările să aibă efect. Apăsați Ok pentru a reporni FreeCAD acum, sau Anulați pentru a reporni mai târziu. - + Checking for updates... Verifica actualizări... - + Apply Aplică - + update(s) actualizare - + No update available Nu există actualizări disponibile - + Macro successfully installed. The macro is now available from the Macros dialog. Macro instalat cu succes. Macro este acum disponibil din dialogul Macros. - + Unable to install Nu se poate instala - + Addon successfully removed. Please restart FreeCAD Addon a fost eliminat. Vă rugăm să reporniţi FreeCAD - + Unable to remove this addon Imposibil de eliminat acest addon - + Macro successfully removed. Macro șters cu succes. - + Macro could not be removed. Macro nu a putut fi eliminat. - + Unable to download addon list. Imposibil de descărcat lista de adăugări. - + Workbenches list was updated. Lista atelierelor a fost actualizată. - + Outdated GitPython detected, consider upgrading with pip. GitPython vechi detectat, luați în considerare actualizarea cu pip. - + List of macros successfully retrieved. Lista macro-urilor recuperate cu succes. - + Retrieving description... Recuperez descrierea... - + Retrieving info from Preluarea informațiilor de la - + An update is available for this addon. O actualizare este disponibilă pentru acest addon. - + This addon is already installed. Acest addon este deja instalat. - + Retrieving info from git Preluare informații de la git - + Retrieving info from wiki Preluare informații de la wiki - + GitPython not found. Using standard download instead. GitPython nu a fost găsit. Se folosește descarcarea standard în schimb. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versiunea dumneavoastră de Pyton nu suportă fișierele de tip ZIP. Nu se poate continua. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + Missing workbench Lipsește ambientul de lucru - + Missing python module Lipsește modulul Python - + Missing optional python module (doesn't prevent installing) Modulul opțional Python lipsește (nu împiedică instalarea) - + Some errors were found that prevent to install this workbench Au fost găsite unele erori care împiedică instalarea ambientului de lucru - + Please install the missing components first. Vă rugăm instalați mai întâi componentele lipsă. - + Error: Unable to download Eroare: Imposibil de descărcat - + Successfully installed Instalat cu succes - + GitPython not installed! Cannot retrieve macros from git GitPython nu este instalat! Nu se pot recupera macro-urile din git - + Installed Instalat - + Update available Actualizare disponibila - + Restart required Repornire necesară - + This macro is already installed. Acest macro este deja instalat. - + A macro has been installed and is available under Macro -> Macros menu Un macro a fost instalat și este disponibil sub meniul Macro -> Macros - + This addon is marked as obsolete Acest addon este marcat ca expirat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. De obicei acest lucru inseamnă că nu mai este menținut, iar unele addon-uri mai avansate oferă aceleași funcții. - + Error: Unable to locate zip from Eroare: Nu se poate localiza zip de la - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ceva nu a mers bine cu Git Macro Retrieval, probabil executabilul Git nu se află in adresă - + This addon is marked as Python 2 Only Acest supliment este marcat ca Python 2 doar - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Acest ambient de lucru nu mai poate fi întreținut și instalarea sa pe un sistem Python 3 va cauza mai mult decât probabil erori la pornire sau în timpul utilizării. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Pare că există o problemă in conectarea la Wiki, prin urmare momentan nu se poate prelua lista de macro Wiki - + Raw markdown displayed Marcaj brut afișat - + Python Markdown library is missing. Lipsește biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index a58e357390..20a21e7919 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место установки @@ -22,257 +22,257 @@ Не удается получить описание для этого макроса. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Дополнения, которые могут быть установлены отсюда, официально не являются частью FreeCAD и не проверяются командой FreeCAD. Убедитесь, что вы знаете, что устанавливаете! - + Addon manager Менеджер дополнений - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Вы должны перезапустить FreeCAD для применения изменений. Нажмите Ok, чтобы перезапустить FreeCAD сейчас, или Отменить, чтобы перезапустить позже. - + Checking for updates... Проверка обновлений... - + Apply Применить - + update(s) обновление (обновления) - + No update available Нет доступных обновлений - + Macro successfully installed. The macro is now available from the Macros dialog. Макрос успешно установлен. Макрос теперь доступен в диалоге Макросы. - + Unable to install Не удалось установить - + Addon successfully removed. Please restart FreeCAD Дополнение успешно удалено. Пожалуйста, перезапустите FreeCAD - + Unable to remove this addon Не удается удалить это дополнение - + Macro successfully removed. Макрос успешно удален. - + Macro could not be removed. Макрос не может быть удален. - + Unable to download addon list. Не удается загрузить список дополнений. - + Workbenches list was updated. Список рабочих окружений обновлен. - + Outdated GitPython detected, consider upgrading with pip. Обнаружен устаревший GitPython, рассмотрите обновление с помощью pip. - + List of macros successfully retrieved. Список макросов успешно получен. - + Retrieving description... Получение описания... - + Retrieving info from Получение информации от - + An update is available for this addon. Для этого дополнения доступно обновление. - + This addon is already installed. Это дополнение уже установлено. - + Retrieving info from git Получение информации из git - + Retrieving info from wiki Получение информации из вики - + GitPython not found. Using standard download instead. GitPython не найден. Вместо этого используется стандартная загрузка. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. По-видимому, ваша версия python не поддерживает ZIP файлы. Продолжение невозможно. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Рабочее окружение успешно установлено. Пожалуйста, перезапустите FreeCAD для применения изменений. - + Missing workbench Отсутствует рабочее окружение - + Missing python module Отсутствует модуль python - + Missing optional python module (doesn't prevent installing) Отсутствует дополнительный модуль python (не запрещает установку) - + Some errors were found that prevent to install this workbench Найдены некоторые ошибки, которые мешают установке этого рабочего окружения - + Please install the missing components first. Сначала установите недостающие компоненты. - + Error: Unable to download Ошибка: Не удалось загрузить - + Successfully installed Успешно установлено - + GitPython not installed! Cannot retrieve macros from git GitPython не установлен! Не удается получить макрос из git - + Installed Установлен - + Update available Доступно обновление - + Restart required Требуется перезапуск - + This macro is already installed. Этот макрос уже установлен. - + A macro has been installed and is available under Macro -> Macros menu Макрос установлен и доступен меню Макросы -> макрос - + This addon is marked as obsolete Это дополнение помечено как устаревшее - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Это обычно означает, что оно больше не поддерживается, и некоторые более продвинутые дополнения в этом списке обеспечивают те же функции. - + Error: Unable to locate zip from Ошибка: Не удается найти zip из - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Что-то пошло не так при запросе макроса с сайта Git. Возможно исполняемый файл Git не находится в нужном месте - + This addon is marked as Python 2 Only Это дополнение помечено Только для Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Этот верстак больше не может быть поддержан, и установка его на систему с Python 3, вероятно, вызовет ошибки при запуске или во время использования. - + User requested updating a Python 2 workbench on a system running Python 3 - Пользователь запросил обновление рабочего стола Python 2 на системе, запущенной с Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Верстак успешно обновлен. Перезапустите FreeCAD, чтобы применить изменения. - + User requested installing a Python 2 workbench on a system running Python 3 - Пользователь запросил установить верстак для Python 2 на системе Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Возможно, возникла проблема при подключении к Wiki, поэтому в данный момент не удается получить список Wiki-макросов - + Raw markdown displayed Показана исходная разметка - + Python Markdown library is missing. Библиотека Python Markdown отсутствует. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts index 298309fd55..a5b8d0ce58 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umiestnenie po inštalácii @@ -22,257 +22,257 @@ Nie je možné prijať popis pre toto makro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Doplnky, ktoré tu môžete nainštalovať, nie sú oficiálnou súčasťou aplikácie FreeCAD a nie sú skontrolované tímom aplikácie FreeCAD. Uistite sa, že viete, čo inštalujete! - + Addon manager Správca doplnkov - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Aby sa zmeny prejavili, musíte reštartovať aplikáciu FreeCAD. Stlačením tlačidla Ok reštartujete aplikáciu FreeCAD ihneď, alebo tlačidlom Zrušiť vykonáte reštart neskôr. - + Checking for updates... Kontrolujú sa aktualizácie... - + Apply Použiť - + update(s) aktualizácia(e/í) - + No update available Nie sú dostupné žiadne aktualizácie - + Macro successfully installed. The macro is now available from the Macros dialog. Makro bolo úspešne nainštalované a je teraz dostupné v dialógovom okne Makrá. - + Unable to install Nie je možné vykonať inštaláciu - + Addon successfully removed. Please restart FreeCAD Doplnok bol úspešne odstránený. Prosím, reštartujte aplikáciu FreeCAD - + Unable to remove this addon Nie je možné odstrániť tento doplnok - + Macro successfully removed. Makro bolo úspešne odstránené. - + Macro could not be removed. Makro sa nepodarilo odstrániť. - + Unable to download addon list. Nie je možné prevziať zoznam doplnkov. - + Workbenches list was updated. Zoznam pracovných priestorov bol aktualizovaný. - + Outdated GitPython detected, consider upgrading with pip. Bola zistená zastaraná knižnica GitPython. Zvážte jej aktualizáciu pomocou programu pip. - + List of macros successfully retrieved. Zoznam makier bol úspešne prijatý. - + Retrieving description... Prijíma sa popis... - + Retrieving info from Prijímajú sa informácie z lokality - + An update is available for this addon. Je dostupná aktualizácia tohto doplnku. - + This addon is already installed. Tento doplnok je už nainštalovaný. - + Retrieving info from git Prijímajú sa informácie z git - + Retrieving info from wiki Prijímajú sa informácie z wiki - + GitPython not found. Using standard download instead. Knižnica GitPython sa nenašla. Použije sa namiesto toho štandardné preberanie. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Zdá sa, že vaša verzia jazyka python nepodporuje súbory ZIP. Nie je možné pokračovať. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Pracovný priestor bol úspešne nainštalovaný. Aby sa prejavili zmeny, prosím, reštartujte aplikáciu FreeCAD. - + Missing workbench Chýba pracovný priestor - + Missing python module Chýba modul jazyka python - + Missing optional python module (doesn't prevent installing) Chýba voliteľný modul jazyka python (inštalácii nebude zabránené) - + Some errors were found that prevent to install this workbench Našli sa nejaké chyby, ktoré zabránili inštalácii tohto pracovného priestoru - + Please install the missing components first. Prosím, najskôr nainštalujte chýbajúce súčasti. - + Error: Unable to download Chyba: Nie je možné prevziať - + Successfully installed Inštalácia úspešná - + GitPython not installed! Cannot retrieve macros from git Knižnica GitPython nie je nainštalovaná! Nedajú sa prijať makrá z git - + Installed Nainštalované - + Update available Dostupná aktualizácie - + Restart required Vyžadovaný reštart - + This macro is already installed. Toto makro je už nainštalované. - + A macro has been installed and is available under Macro -> Macros menu Makro bolo nainštalované a je dostupné v ponuke Makro -> Makrá - + This addon is marked as obsolete Tento doplnok je označený ako zastaraný - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obvykle znamená, že už nie je udržiavaný, a že niektorý pokročilejší doplnok z tohto zoznamu poskytuje rovnaké funkcie. - + Error: Unable to locate zip from Chyba: Nie je možné lokalizovať súbor zip z lokality - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Niekde nastala chyba počas získavania makra zo systému Git, pravdepodobne spustiteľný súbor systému Git nie je v PATH - + This addon is marked as Python 2 Only Tento doplnok je označený ako kompatibilný iba s jazykom Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tento pracovný priestor nemusí byť už udržiavaný a jeho inštalácia v systéme s jazykom Python verzie 3 bude mať pravdepodobne za následok chyby pri spúšťaní alebo počas používania. - + User requested updating a Python 2 workbench on a system running Python 3 - Používateľ požiadal o aktualizáciu pracovného priestoru jazyka Python 2 v systéme s jazykom Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Pracovný priestor bol úspešne aktualizovaný. Prosím, reštartujte aplikáciu FreeCAD na uplatnenie zmien. - + User requested installing a Python 2 workbench on a system running Python 3 - Používateľ požiadal o inštaláciu pracovného priestoru jazyka Python 2 v systéme s jazykom Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Vypadá byť problém s pripojením na Wiki, preto nie je momentálne možné načítať zoznam makier - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Chýba knižnica Markdown jazyka Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index 0d2edb5d04..ca3aba0d5b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mesto namestitve @@ -22,257 +22,257 @@ Opisa tega makra ni mogoče pridobiti. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Dodatki, ki jih je tukaj mogoče namestiti, niso uradno del FreeCADA in jih osebje FreeCADA ni pregledalo. Zato poskrbite, da pred namestitivijo izdelek poznate! - + Addon manager Upravljalnik dodatkov - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Za uveljavitev sprememb je potrebno FreeCAD ponovno zaganti. Za takojšen ponovni zagon klinite V redu, če želite ponovno zagnati kasneje, pa kliknite Prekliči. - + Checking for updates... Preverjam za posodobitve... - + Apply Uveljavi - + update(s) posodobitev(-ve) - + No update available Posodobitev ni na voljo - + Macro successfully installed. The macro is now available from the Macros dialog. Makro uspešno nameščen. Sedaj je dostopen skozi pogovorno okno Makri. - + Unable to install Ni mogoče namestiti - + Addon successfully removed. Please restart FreeCAD Dodatek uspešno odstranjen. Ponovno zaženite FreeCAD - + Unable to remove this addon Tega dodatka ni mogoče odstraniti - + Macro successfully removed. Makro uspešno odstranjen. - + Macro could not be removed. Makra ni bilo mogoče odstraniti. - + Unable to download addon list. Seznama dodatkov ni bilo mogoče prenesti. - + Workbenches list was updated. Seznam delovnih okolij je bil posodobljen. - + Outdated GitPython detected, consider upgrading with pip. Zaznan je zastarel GitPython; razmislite o nadgraditivi s pip-om. - + List of macros successfully retrieved. Seznam makrov uspšno pridobljen. - + Retrieving description... Pridobivanje opisov ... - + Retrieving info from Pridobivanje podatkov iz - + An update is available for this addon. Posodobitev za ta dodatek je na voljo. - + This addon is already installed. Ta dodatek je že nameščen. - + Retrieving info from git Pridobivanje podatkov iz git-a - + Retrieving info from wiki Pridobivanje podatkov iz wiki strani - + GitPython not found. Using standard download instead. GitPython ni mogoče najti. Namesto tega je običajno prenašanje. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Kot kaže, vaša različica Pythona ne podpira datotek ZIP. Ni mogoče nadaljevati. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Delovno okolje uspešno nameščeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + Missing workbench Manjkajoče delovno oklje - + Missing python module Manjkajoči Pythonov modul - + Missing optional python module (doesn't prevent installing) Manjkajoči neobvezni Pythonov modul (ne ustavi namestitve) - + Some errors were found that prevent to install this workbench Najdene so bile določene napake, ki preprečujejo namestitev tega delovnega okolja - + Please install the missing components first. Namestite najprej manjkajoče sestavine. - + Error: Unable to download Napaka: Ni mogoče prenesti - + Successfully installed Uspešno nameščeno - + GitPython not installed! Cannot retrieve macros from git GitPython ni nameščen! Makrov ni mogoče pridobiti iz git-a - + Installed Nameščeno - + Update available Posodobitev je na voljo - + Restart required Potreben ponovni zagon - + This macro is already installed. Ta makro je že nameščen. - + A macro has been installed and is available under Macro -> Macros menu Makro je bil namščen in je dosegljiv preko menija Makro -> Makri - + This addon is marked as obsolete Ta dodatek je označen kot zastarel - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To ponavadi pomeni, da ni več vzdrževan in naprednejši dodatek s tega seznama nudi enake zmožnosti. - + Error: Unable to locate zip from Napaka: Ni mogoče najti zipa od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Pri pridobivanju Git makra se je nekje zalomilo. Najverjetneje Git-ove izvršljive datoteke ni na tej poti - + This addon is marked as Python 2 Only Ta dodatek je označen, da je le za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. To delovno okolje lahko ni več vzdrževano in namestitev v Python 3 okolje bo najverjetneje prinesla napake pri zagonu ali med delovanjem. - + User requested updating a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil posodobitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Delovno okolje je uspešno posodobljeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil namestitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Kaže, da je težava v povezavi z Wiki, zaradi česa trenutno ni mogoče pridobiti seznama Wiki makrov - + Raw markdown displayed Prikazan surov Markdown - + Python Markdown library is missing. Knjižnica Python Markdowna manjka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index 0ac8d2456b..59586a805d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место инсталираног @@ -22,257 +22,257 @@ Не могу да добавим опис за овај макро. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Додаци који се могу инсталирати овде нису званични део FreeCAD-а, и нису прегледани од стране тима FreeCAD-а. Уверите се да знате шта то инсталирате! - + Addon manager Управник додацима - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Морате поново да покренете FreeCAD да би измене ступиле у дејство. Притисните „У реду“ да сада поново покренете FreeCAD, или „Откажи“ да га поново покренете касније. - + Checking for updates... Проверавам ажурирања... - + Apply Примени - + update(s) ажурирање(а) - + No update available Нема доступних ажурирања - + Macro successfully installed. The macro is now available from the Macros dialog. Макро је успешно инсталиран. Сада је доступан из прозорчета макроа. - + Unable to install Не могу да инсталирам - + Addon successfully removed. Please restart FreeCAD Додатак је успешно уклоњен. Поново покрените FreeCAD - + Unable to remove this addon Не могу да уклоним овај додатак - + Macro successfully removed. Макро је успешно уклоњен. - + Macro could not be removed. Макро се не може уклонити. - + Unable to download addon list. Не могу да преузмем списак додатака. - + Workbenches list was updated. Списак радних станица је освежен. - + Outdated GitPython detected, consider upgrading with pip. Откривен је застарели Гит Питон, размотрите надоградњу са пип-ом. - + List of macros successfully retrieved. Списак макроа је успешно довучен. - + Retrieving description... Довлачим опис... - + Retrieving info from Довлачим информације са - + An update is available for this addon. Ажурирање је доступно за овај додатак. - + This addon is already installed. Овај додатак је већ инсталиран. - + Retrieving info from git Довлачим информације са гита - + Retrieving info from wiki Довлачим информације са викија - + GitPython not found. Using standard download instead. Нисам нашао Гит Питона. Користим уобичајено преузимање. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ваше издање питона не изгледа да подржава ЗИП датотеке. Не могу да наставим. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Радна станица је успешно инсталирана. Поново покрените FreeCAD да примените измене. - + Missing workbench Недостаје радна станица - + Missing python module Недостаје модул питона - + Missing optional python module (doesn't prevent installing) Недостаје изборни модул питона (не спречава инсталацију) - + Some errors were found that prevent to install this workbench Нађох неке грешке које спречавају инсталирање ове радне станице - + Please install the missing components first. Прво инсталирајте недостајуће компоненте. - + Error: Unable to download Грешка: Не могу да преузмем - + Successfully installed Успешно је инсталирано - + GitPython not installed! Cannot retrieve macros from git Гит Питон није инсталиран! Не могу да довучем макрое са гита - + Installed Инсталиран - + Update available Доступно је ажурирање - + Restart required Поновно покретање је потребно - + This macro is already installed. Овај макро је већ инсталиран. - + A macro has been installed and is available under Macro -> Macros menu Макро је инсталиран и доступан је у изборнику „Макро → Макрои“ - + This addon is marked as obsolete Овај додатак је означен као застарео - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Ово обично значи да више није одржаван, а неки напреднији додатак на овом списку обезбеђује исту функционалност. - + Error: Unable to locate zip from Грешка: Не могу да нађем зип из - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Нешто је пошло наопако са довлачењем Гит Макроа, вероватно Гитова извршна није у путањи - + This addon is marked as Python 2 Only Овај додатак је означен само као Питон 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Ова радна станица се можда више не одржава и њена инсталација на систему Питона 3 ће више него вероватно резултирати у грешкама при покретању или приликом коришћења. - + User requested updating a Python 2 workbench on a system running Python 3 - Корисник је затражио ажурирање радне станице Питона 2 на систему који покреће Питон 3 – - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Радна станица је успешно ажурирана. Поново покрените FreeCAD да примените измене. - + User requested installing a Python 2 workbench on a system running Python 3 - Корисник је затражио инсталацију радне станице Питона 2 на систему који покреће Питон 3 – - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Изгледа да постоји проблем у повезивању са Викијем, стога не могу да довучем Вики списак макроа у овом тренутку - + Raw markdown displayed Приказано је сирово обележавање - + Python Markdown library is missing. Недостаје библиотека Питоновог обележавања. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index 2820678f49..5d80f64a21 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Det gick inte att hämta en beskrivning för det här makrot. @@ -22,257 +22,257 @@ Kan inte hämta en beskrivning för detta makro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Tilläggen som kan installeras är inte en officiell del av FreeCAD, och granskas inte av FreeCAD-teamet. Var säker på att du vet vad du installerar! - + Addon manager Tilläggs hanterare - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Du måste starta om FreeCAD för att ändringar ska börja gälla. Tryck Ok för att starta om FreeCAD nu, eller Avbryt för att starta om senare. - + Checking for updates... Letar efter uppdateringar... - + Apply Verkställ - + update(s) uppdatering(ar) - + No update available Inga uppdateringar tillgängliga - + Macro successfully installed. The macro is now available from the Macros dialog. Makrot installerades. Makrot är nu tillgängligt från makrodialogfönstret. - + Unable to install Kan inte installera - + Addon successfully removed. Please restart FreeCAD Tillägget togs bort. Vänligen starta om FreeCAD - + Unable to remove this addon Kan inte ta bort detta tillägg - + Macro successfully removed. Makrot togs bort. - + Macro could not be removed. Makrot kunde inte tas bort. - + Unable to download addon list. Kan inte hämta tilläggslista. - + Workbenches list was updated. Arbetsytelista uppdaterades. - + Outdated GitPython detected, consider upgrading with pip. Utdaterad GitPython detekterad, överväg att uppgradera med pip. - + List of macros successfully retrieved. Makrolista hämtades. - + Retrieving description... Hämtar beskrivning... - + Retrieving info from Hämtar information från - + An update is available for this addon. En uppdatering är tillgänglig för detta tillägg. - + This addon is already installed. Det här tillägget är redan installerat. - + Retrieving info from git Hämtar information från git - + Retrieving info from wiki Hämtar information från wiki - + GitPython not found. Using standard download instead. GitPython hittades inte. Vanlig nedladdning används istället. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Din version av Python verkar inte stöda ZIP-filer. Kan inte fortsätta. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbetsytan installerades. Vänligen starta om FreeCAD för att den ska bli tillgänglig i programmet. - + Missing workbench Hittar inte arbetsyta - + Missing python module Hittar inte Python-modul - + Missing optional python module (doesn't prevent installing) Hittar inte frivillig Python-modul (förhindrar inte installation) - + Some errors were found that prevent to install this workbench Några fel hittades som förhindrar installationen av denna arbetsyta - + Please install the missing components first. Vänligen installera de saknade komponenterna först. - + Error: Unable to download Fel: Kan inte ladda ned - + Successfully installed Installationen lyckades - + GitPython not installed! Cannot retrieve macros from git GitPython inte installerad! Kan inte hämta makron från git - + Installed Installerad - + Update available Uppdatering tillgänglig - + Restart required Omstart krävs - + This macro is already installed. Det här makrot är redan installerat. - + A macro has been installed and is available under Macro -> Macros menu Ett makro har installerats och är tillgängligt under menyn Makro -> Makron - + This addon is marked as obsolete Detta addon är markerat som föråldrat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Det betyder oftast att den inte längre underhålls, och vissa mer avancerade addon i den här listan ger samma funktionalitet. - + Error: Unable to locate zip from Fel: Det gick inte att hitta zip från - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Något gick fel med Git Macro Retrieval, möjligen Git körbara är inte i sökvägen - + This addon is marked as Python 2 Only Detta addon är markerat som Endast Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Denna arbetsbänk får inte längre underhållas och installera den på ett Python 3-system kommer mer än sannolikt resultera i fel vid start eller när den används. - + User requested updating a Python 2 workbench on a system running Python 3 - Användaren begärde att uppdatera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench uppdateras med lyckat resultat. Vänligen starta om FreeCAD för att tillämpa ändringarna. - + User requested installing a Python 2 workbench on a system running Python 3 - Användaren begärde att installera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Verkar vara ett problem som ansluter till Wiki, kan därför inte hämta Wiki makro lista för tillfället - + Raw markdown displayed Råmarkering visas - + Python Markdown library is missing. Python Markdown-biblioteket saknas. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index 36de9c0a0b..daa2d502f7 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Yükleme konumu @@ -22,257 +22,257 @@ Bu makro için bir tanım alınamadı. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Yüklenebilecek eklentiler FreeCAD'in resmi bir parçası değildir ve FreeCAD takımı tarafından incelenmemektedir. Ne yüklediğinizi bildiğinizden emin olun! - + Addon manager Eklenti Yöneticisi - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Değişikliklerin geçerli olması için FreeCAD'i yeniden başlatmalısınız. FreeCAD'i şimdi yeniden başlatmak için Tamam'a, ya da daha sonra yeniden başlatmak için İptal'e basın. - + Checking for updates... Güncellemeler kontrol ediliyor... - + Apply Uygula - + update(s) Güncelleştirme(ler) - + No update available Güncelleştirme Yok - + Macro successfully installed. The macro is now available from the Macros dialog. Makro başarıyla yüklendi. Bu makroya makro iletişim kutusundan ulaşılabilir. - + Unable to install Yüklenemiyor - + Addon successfully removed. Please restart FreeCAD Eklenti başarıyla kaldırıldı. Lütfen FreeCAD'i yeniden başlatın - + Unable to remove this addon Bu eklenti kaldırılamıyor - + Macro successfully removed. Makro başarıyla kaldırıldı. - + Macro could not be removed. Makro kaldırılamıyor. - + Unable to download addon list. Eklenti listesi indirilemiyor. - + Workbenches list was updated. Çalışma Tezgahı listesi güncelleştirildi. - + Outdated GitPython detected, consider upgrading with pip. Geçmiş sürüme ait GitPython tespit edildi. Pip ile güncelleştirmeyi değerlendirin. - + List of macros successfully retrieved. Makroların listesi başarı ile alındı. - + Retrieving description... Tanım alınıyor... - + Retrieving info from Bilgi alınıyor - + An update is available for this addon. Bu eklenti için bir güncelleştirme mevcuttur. - + This addon is already installed. Bu eklenti halihazırda yüklüdür. - + Retrieving info from git Git'ten bilgi alınıyor - + Retrieving info from wiki Wiki'den bilgi alınıyor - + GitPython not found. Using standard download instead. GitPython bulunamadı. Standart yüklemeyi kullanmayı deneyin. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sizin Python versiyonunuz ZIP dosyalarını desteklemiyor olabilir. İşlem yapılamadı. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Çalışma Tezgahı başarı ile yüklendi. Değişikliklerin geçerli olması için lütfen FreeCAD'i yeniden başlatın. - + Missing workbench Eksik Çalışma Tezgahı - + Missing python module Eksik Python Modülü - + Missing optional python module (doesn't prevent installing) Eksik opsiyonel pyhton modülü (yüklemeye engel değil) - + Some errors were found that prevent to install this workbench Bu Çalışma Tezgahı'nın yüklenmesini engelleyen bazı hatalar bulundu - + Please install the missing components first. Lüften önce eksik bileşenleri yükleyin. - + Error: Unable to download Hata: İndirilemiyor - + Successfully installed Başarıyla Yüklendi - + GitPython not installed! Cannot retrieve macros from git GitPython kurulu değil! Makrolar Git'ten alınamıyor - + Installed Yüklendi - + Update available Güncelleştirme Mevcut - + Restart required Yeniden başlatma gerekli - + This macro is already installed. Bu makro zaten yüklü. - + A macro has been installed and is available under Macro -> Macros menu Bir makro yüklendi ve buna makro->makrolar menüsü altından ulaşılabilir - + This addon is marked as obsolete Bu eklenti eskimiş olarak işaretleniyor - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Bu ifade genellikle, eklentinin artık sürdürülmediği ve bu listedeki bazı daha gelişmiş eklentilerin aynı işlevselliği sunacağı anlamına gelmektedir. - + Error: Unable to locate zip from Hata: Posta kodu bulunamıyor - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git Makro Çağırma ile ilgili bir şeyler ters gitti; muhtemelen Git çalıştırılabilir, adres yolunda değil - + This addon is marked as Python 2 Only Bu eklenti, Sadece Python 2 olarak işaretleniyor - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Bu tezgah artık sürdürülemeyebilir ve bunu Python 3 sistemine yüklemek, başlangıç hatalarında veya kullanım sırasında daha iyi sonuç verecektir. - + User requested updating a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını güncellemek istedi - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Tezgah başarıyla güncellendi. Değişikliklerin uygulanması için lütfen FreeCAD' i yeniden başlatın. - + User requested installing a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını yüklemek istedi - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wiki'ye bağlanma sorunu gibi görünüyor, bu nedenle şu anda Wiki makro listesi alınamıyor - + Raw markdown displayed Ham markdown görüntülendi - + Python Markdown library is missing. Python Markdown kitaplığı eksik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index 1b87dbf3b9..cc2e4646b8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Менеджер додатків - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Перевірка наявності оновлень... - + Apply Застосувати - + update(s) оновлення - + No update available Оновлень немає - + Macro successfully installed. The macro is now available from the Macros dialog. Макрос успішно встановлений. Відтепер цей макрос доступний у діалоговому вікні Макроси. - + Unable to install Встановити не вдалося - + Addon successfully removed. Please restart FreeCAD Додаток успішно видалений. Перезапустіть FreeCAD, будь ласка - + Unable to remove this addon Неможливо видалити цей додаток - + Macro successfully removed. Макрос успішно видалений. - + Macro could not be removed. Макрос не може бути видалений. - + Unable to download addon list. Неможливо завантажити перелік додатків. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Отримання опису... - + Retrieving info from Retrieving info from - + An update is available for this addon. Для цього додатка наявне оновлення. - + This addon is already installed. Цей додаток вже встановлений. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Відсутній модуль python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Помилка: завантаження неможливе - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Installed - + Update available Update available - + Restart required Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 0d0d1ac1ea..7fdec8b2a2 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicació instal·lada @@ -22,257 +22,257 @@ No es pot recuperar una descripció d'aquesta macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! Els complements que es poden instal·lar ací no formen part oficialment de FreeCAD, i l'equip de FreeCAD no els pot revisar. Assegureu-vos que sabeu què esteu instal·lant. - + Addon manager Gestor de complements - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. Heu de reiniciar FreeCAD perquè els canvis siguen efectius. Premeu D'acord per reiniciar FreeCAD ara o bé Cancel·la per reiniciar-lo després. - + Checking for updates... S'estan buscant actualitzacions... - + Apply Aplica - + update(s) actualitzacions - + No update available No hi ha cap actualització disponible - + Macro successfully installed. The macro is now available from the Macros dialog. S'ha instal·lat la macro correctament. La macro ja està disponible des del quadre de diàleg Macros. - + Unable to install No es pot instal·lar - + Addon successfully removed. Please restart FreeCAD S'ha eliminat el complement correctament. Reinicieu FreeCAD - + Unable to remove this addon No es pot eliminar aquest complement - + Macro successfully removed. S'ha eliminat la macro correctament. - + Macro could not be removed. No s'ha pogut eliminar la macro. - + Unable to download addon list. No es pot baixar la llista de complements. - + Workbenches list was updated. S'ha actualitzat la llista de bancs de treball. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Falta el mòdul python - + Missing optional python module (doesn't prevent installing) Falta el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Instal·leu primer els components que falten. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython. No es poden recuperar les macros de git - + Installed S'ha instal·lat - + Update available Hi ha una actualització disponible - + Restart required S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançats d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts index 2b859088eb..bde947dfd6 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... Kiểm tra cập nhật... - + Apply Áp dụng - + update(s) cập nhật - + No update available Không có bản cập nhật - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install Unable to install - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon Unable to remove this addon - + Macro successfully removed. Macro successfully removed. - + Macro could not be removed. Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Thiếu môđun python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Vui lòng cài đặt các thành phần còn thiếu trước đã. - + Error: Unable to download Lỗi: Không thể tải về - + Successfully installed Cài đặt thành công - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed Đã cài đặt - + Update available Cập nhật sẵn có - + Restart required Yêu cầu khởi động máy - + This macro is already installed. Vĩ lệnh này đã được cài đặt. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index af0ea32f25..c8ca9f3932 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安装位置 @@ -22,257 +22,257 @@ 无法获取此宏的描述。 - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! 在此安装的插件不是 FreeCAD 的官方内容，也未经 FreeCAD 团队审核。请确保您知道您所安装的内容！ - + Addon manager 插件管理器 - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. 必须重新启动FreeCAD，以便更改生效。按确认立即重启FreeCAD，如您要稍后再重启，请按取消。 - + Checking for updates... 正在检查更新... - + Apply 应用 - + update(s) 更新(s) - + No update available 已是最新版本 - + Macro successfully installed. The macro is now available from the Macros dialog. 宏安装成功。可以从宏对话框中访问。 - + Unable to install 无法安装 - + Addon successfully removed. Please restart FreeCAD 插件已被成功删除。请重新启动FreeCAD - + Unable to remove this addon 无法删除此插件 - + Macro successfully removed. 宏被成功删除。 - + Macro could not be removed. 无法删除宏。 - + Unable to download addon list. 无法下载插件列表。 - + Workbenches list was updated. 工作台列表已更新。 - + Outdated GitPython detected, consider upgrading with pip. 检测到过时的 GitPython，建议您使用pip进行升级。 - + List of macros successfully retrieved. 成功获取了宏列表。 - + Retrieving description... 正在获取描述... - + Retrieving info from 获取信息 - + An update is available for this addon. 此插件可以更新。 - + This addon is already installed. 此插件已经被安装。 - + Retrieving info from git 从 git 获取信息 - + Retrieving info from wiki 从维基获取信息 - + GitPython not found. Using standard download instead. 找不到 GitPython。改用标准下载。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 您的 python 版本似乎不支持 ZIP 文件。无法继续。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 工作台安装成功。请重新启动 FreeCAD 以应用更改。 - + Missing workbench 缺少工作台 - + Missing python module 缺少 python 模块 - + Missing optional python module (doesn't prevent installing) 缺少可选的 python 模块 (没有阻止安装) - + Some errors were found that prevent to install this workbench 发现一些错误，无法安装这个工作台 - + Please install the missing components first. 请先安装丢失的组件。 - + Error: Unable to download 错误：无法下载 - + Successfully installed 成功安装了 - + GitPython not installed! Cannot retrieve macros from git GitPython 未安装！无法从 git 检索宏 - + Installed 已安装 - + Update available 有可用的更新 - + Restart required 需要重启 - + This macro is already installed. 此宏已经安装。 - + A macro has been installed and is available under Macro -> Macros menu 宏已经安装，可以在宏 -> 宏菜单下使用 - + This addon is marked as obsolete 该插件被标记为已过时 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 这通常意味着不再维护它，并且此列表中的一些更高级的插件提供了相同的功能。 - + Error: Unable to locate zip from 错误：无法从中找到邮政编码 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git 宏检索出现问题，可能是 Git 可执行文件不在路径中 - + This addon is marked as Python 2 Only 此插件标记为仅支持 Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. 这个工作台可能不再被维护，在python3系统上安装它很可能会在启动或使用时导致错误。 - + User requested updating a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上更新 Python 2 工作台 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. 工作台已成功更新。请重启 FreeCAD 以应用更改。 - + User requested installing a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上安装 Python 2 工作台 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time 连接到Wiki时出现问题，因此现在无法检索维基宏列表 - + Raw markdown displayed 显示原始Markdown - + Python Markdown library is missing. Python Markdown 库缺失。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index a6d1832750..7eeeb2abe3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安裝位置 @@ -22,257 +22,257 @@ Unable to retrieve a description for this macro. - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager 附加元件管理器 - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... 檢查更新... - + Apply 應用 - + update(s) 更新 - + No update available 沒有可用的更新 - + Macro successfully installed. The macro is now available from the Macros dialog. Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install 無法安裝 - + Addon successfully removed. Please restart FreeCAD Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon 無法移附這個附件 - + Macro successfully removed. 巨集成功的移除 - + Macro could not be removed. 巨集無法被移除 - + Unable to download addon list. 無法下載附加元件清單 - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench 遺失的工作台 - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 錯誤: 無法下載 - + Successfully installed 安裝成功 - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git - + Installed 己安裝 - + Update available 有更新可用 - + Restart required 必須重啟 - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete 這個附件己被標記為丟棄 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from 錯誤: 無法取得本地的郵遞區號 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only 這個附件元件標記只能用在Python2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/Arch/Resources/translations/Arch_af.ts b/src/Mod/Arch/Resources/translations/Arch_af.ts index 73604f45bc..578317bd7e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_af.ts +++ b/src/Mod/Arch/Resources/translations/Arch_af.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Komponente @@ -2057,7 +2057,7 @@ Komponente van hierdie voorwerp - + Axes Asse @@ -2067,27 +2067,27 @@ Skep As - + Remove Verwyder - + Add Voeg by - + Axis As - + Distance Afstand - + Angle Hoek @@ -2197,7 +2197,7 @@ Skep struktuur - + Create Wall Skep muur @@ -2222,42 +2222,42 @@ Skep venster - + Edit Wysig - + Create/update component Skep/opdateer die komponent - + Base 2D object Basis 2D-komponent - + Wires Drade - + Create new component Skep 'n nuwe komponent - + Name Naam - + Type Soort - + Thickness Dikte @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2799,22 +2799,22 @@ Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Grid - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Center @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Links - + Right Regs - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Muur - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Muur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Skep 'n muurvoorwerp van nuuts of van 'n gekose voorwerp (draad, vlak of soliede) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.ts b/src/Mod/Arch/Resources/translations/Arch_ar.ts index 4bd57ed1e1..bc154a6a48 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ar.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ar.ts @@ -949,32 +949,32 @@ إذا كان صحيح يتم محاذاة العنصر مع المحاور - + The length of this wall. Not used if this wall is based on an underlying object طول هذا الجدار. لا يستخدم إذا كان هذا الجدار يستند إلى كائن أساسي - + The width of this wall. Not used if this wall is based on a face عرض هذا الجدار. لا يستخدم إذا كان هذا الجدار على أساس وجه - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid ارتفاع هذا الجدار. حافظ على 0 تلقائيا. لا يستخدم إذا كان هذا الجدار على أساس الصلابة - + The alignment of this wall on its base object, if applicable محاذاة هذا الجدار على قاعدة كائنه ، إذا كان قابل للتطبيق - + The face number of the base object used to build this wall رقم وجه الكائن الأساسي المستخدم لبناء هذا الجدار - + The offset between this wall and its baseline (only for left and right alignments) الإزاحة بين هذا الجدار وخط الأساس (فقط لمحاذاة اليسار واليمين) @@ -1054,7 +1054,7 @@ تداخل الحصائر مع أسفل النوائم - + The number of the wire that defines the hole. A value of 0 means automatic رقم السلك الذي يعرف الثقب. عند استخدام القيمة 0 يتم حساب القيمة أتوماتيكيا @@ -1074,7 +1074,7 @@ تحويل يتم تطبيقه على كل تصنيف - + The axes this system is made of محاور هذا النظام تتكون من @@ -1204,7 +1204,7 @@ حجم الخط - + The placement of this axis system وضع المحور @@ -1224,57 +1224,57 @@ عرض الخط لهذا العنصر - + An optional unit to express levels وحدة اختيارية للتعبير عن المستويات - + A transformation to apply to the level mark تحول لتطبيقه على مستوى العلامة - + If true, show the level إذا كان صحيحاً، أظهر المستوى - + If true, show the unit on the level tag إذا كان صحيحاً، أظهر الوحدة على بطاقة المستوى - + If true, when activated, the working plane will automatically adapt to this level إذا كان صحيحا، عند تفعيله، فسيتكيف سطح العمل تلقائياً مع هذا المستوى - + The font to be used for texts الخط الذي سيتم استخدامه للنصوص - + The font size of texts حجم الخط للنصوص - + Camera position data associated with this object بيانات موضع الصَّوَّارة المرتبطة بهذا العنصر - + If set, the view stored in this object will be restored on double-click في حالة الضبط، سيتم استعادة العرض المخزن في هذا العنصر بنقرة مزدوجة - + The individual face colors ألوان الوجه الفردية - + If set to True, the working plane will be kept on Auto mode إذا تم ضبطه على صحيح، سيتم الاحتفاظ بسطح العمل في الوضع التلقائي @@ -1419,42 +1419,42 @@ اتجاه الرحلة بعد الهبوط - + Enable this to make the wall generate blocks تمكين هذا لجعل الجدار ينشئ كتل - + The length of each block طول كل كتلة - + The height of each block ارتفاع كل كتلة - + The horizontal offset of the first line of blocks الإزاحة الأفقية للخط الأول من الكتل - + The horizontal offset of the second line of blocks الإزاحة الأفقية للخط الثاني من الكتل - + The size of the joints between each block مقاس الروابط بين كل جزء - + The number of entire blocks العدد الإجمالي للكتل - + The number of broken blocks عدد الأجزاء المكسورة @@ -1604,27 +1604,27 @@ سمك الناهضين - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects عرض الخط لهذا العنصر - + The line color of child objects لون الخط لهذا العنصر - + The shape color of child objects لون الشكل لهذا العنصر - + The transparency of child objects شفافية هذا العنصر @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level قطع العرض فوق هذا المستوى - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it إذا كانت صحيحه إنقر مرتين على هذا العنصر للتفعيل @@ -2047,7 +2047,7 @@ Arch - + Components المكونات @@ -2057,7 +2057,7 @@ مكونات لهاذا الكائن - + Axes محاور @@ -2067,27 +2067,27 @@ انشاء محوار - + Remove إزالة - + Add إضافة - + Axis محور - + Distance Distance - + Angle الزاوية @@ -2197,7 +2197,7 @@ إنشاء هيكل - + Create Wall إنشاء جدار @@ -2222,42 +2222,42 @@ إنشاء نافذة - + Edit تعديل - + Create/update component إنشاء / تحديث المكون - + Base 2D object Base 2D object - + Wires Wires - + Create new component إنشاء مكون جديد - + Name الإسم - + Type النوع - + Thickness سمك @@ -2332,22 +2332,22 @@ تعذر حساب شكل - + Merge Wall دمج الجدار - + Please select only wall objects الرجاء تحديد أجسام الحائط فقط - + Merge Walls دمج الجدران - + Distances (mm) and angles (deg) between axes المسافات (بالـ mm) والزوايا (بالـ °) بين المحاور @@ -2799,22 +2799,22 @@ الباب - + Hinge مفصل - + Opening mode وضع الافتتاح - + Get selected edge احصل على الحافة المحددة - + Press to retrieve the selected edge اضغط لاسترداد الحافة المحددة @@ -2844,17 +2844,17 @@ طبقة جديدة - + Wall Presets... إعدادات الحائط المسبقة... - + Hole wire ثقب الأسلاك - + Pick selected اختر المحدد @@ -2869,67 +2869,67 @@ إنشاء الشبكة - + Label عنوان - + Axis system components مكونات نظام المحور - + Grid شبكة - + Total width العرض الكلي - + Total height الإرتفاع الإجمالي - + Add row اضف الصف - + Del row احذف الصف - + Add col إضافة عمود - + Del col حذف عمود - + Create span Create span - + Remove span Remove span - + Rows الصفوف - + Columns الأعمدة @@ -2944,12 +2944,12 @@ حدود الفضاء - + Error: Unable to modify the base object of this wall خطأ: تَعَذّر تعديل العنصر القاعدي لهذا الجدار - + Window elements عناصر النافذة @@ -3014,22 +3014,22 @@ المرجو اختيار محور واحد على الأقل - + Auto height is larger than height الإرتفاع الإفتراضي أكبر من الإرتفاع - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width العرض الإفتراضي أكبر من العرض - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center مركز @@ -3279,12 +3279,12 @@ تم العثور على التقاطع. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component تعذّر إنشاء المكون - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire رقم السلك(wire) الذي سيحدد الثقب في عنصر المضيف. إذا كانت القيمة هي 0 فسوف يتم اتخاد السلك الأكبر بطريقة تلقائية - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left يسار - + Right يمين - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela الجدار - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools أدوات المحور @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows عدد الصفوف - + The number of columns عدد الأعمدة - + The sizes for rows أحجام الصفوف - + The sizes of columns أحجام الأعمدة - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid العرض الكلي لهذه الشبكة - + The total height of this grid الارتفاع الكلي لهذه الشبكة - + Creates automatic column divisions (set to 0 to disable) ينشئ تقسيم الأعمدة التلقائية (تعيين 0 للتعطيل) - + Creates automatic row divisions (set to 0 to disable) ينشئ تقسيم الصف التلقائي (تعيين 0 للتعطيل) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide مؤشرات الوجوه التي سيتم إخفائها @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls دمج الجدران - + Merges the selected walls, if possible القيام بدمج الجدران المختارة، إن كان ذلك ممكنا @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall الجدار - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4922,7 +4922,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position كتابة موضع الكاميرا diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index e44a44a456..836fa5ec5e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -949,32 +949,32 @@ Si s'estableix a cert, l'element s'alinea amb els eixos - + The length of this wall. Not used if this wall is based on an underlying object La longitud del mur. No s'utilitza si el mur es basa en un objecte subjacent - + The width of this wall. Not used if this wall is based on a face L'amplària del mur. No s'utilitza si el mur es basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'alçària del mur. Manteniu 0 per a automàtica. No s'utilitza si el mur es basa en un sòlid - + The alignment of this wall on its base object, if applicable L'alineació del mur sobre el seu objecte de base, si correspon - + The face number of the base object used to build this wall El número de la cara de l'objecte de base utilitzat per a construir el mur - + The offset between this wall and its baseline (only for left and right alignments) La distància entre el mur i la seua línia de base (només per a les alineacions dreta i esquerra) @@ -1054,7 +1054,7 @@ La superposició dels muntants d'escala sobre la part inferior de les esteses - + The number of the wire that defines the hole. A value of 0 means automatic El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic @@ -1074,7 +1074,7 @@ Una transformació que s'aplica a cada etiqueta - + The axes this system is made of Els eixos que formen aquest sistema @@ -1204,7 +1204,7 @@ La mida de la tipografia - + The placement of this axis system La posició del sistema d'eixos @@ -1224,57 +1224,57 @@ El gruix de la línia d'aquest objecte - + An optional unit to express levels Una unitat opcional per expressar nivells - + A transformation to apply to the level mark Una transformació per aplicar a la marca de nivell - + If true, show the level Si és cert, mostra el nivell - + If true, show the unit on the level tag Si és cert, mostra la unitat en l'etiqueta de nivell - + If true, when activated, the working plane will automatically adapt to this level Si és cert, quan s'activi, el pla de treball s'adaptarà automàticament a aquest nivell - + The font to be used for texts La tipografia a utilitzar pels texts - + The font size of texts La mida de la tipografia dels texts - + Camera position data associated with this object Dades de posició de la càmera associades amb aquest objecte - + If set, the view stored in this object will be restored on double-click Si s'estableix, la vista emmagatzemada en aquest objecte es restaurarà fent doble clic - + The individual face colors Els colors de la cara individual - + If set to True, the working plane will be kept on Auto mode Si s'establert en Cert, el pla de treball es mantindrà en mode Automàtic @@ -1419,42 +1419,42 @@ La direcció d'un tram d'escala després d'un replà - + Enable this to make the wall generate blocks Habilita aquesta opció per fer que la paret generi blocs - + The length of each block La longitud de cada bloc - + The height of each block L'altura de cada bloc - + The horizontal offset of the first line of blocks El desplaçament horitzontal de la primera línia de blocs - + The horizontal offset of the second line of blocks El desplaçament horitzontal de la segona línia de blocs - + The size of the joints between each block La mida de juntes entre cada bloc - + The number of entire blocks El nombre de blocs sencers - + The number of broken blocks El nombre de blocs trencats @@ -1604,27 +1604,27 @@ La grossària de les contrapetges - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Si és vertader, mostra els objectes continguts en aquesta part de la construcció que adoptaran aquests ajustos de de línia, color i transparència - + The line width of child objects L'amplària de la línia dels objectes fills - + The line color of child objects El color de la línia dels objectes fills - + The shape color of child objects El color de la forma dels objectes fills - + The transparency of child objects La transparència dels objectes fills @@ -1644,37 +1644,37 @@ Aquesta propietat emmagatzema una representació d'inventor per a aquest objecte - + If true, display offset will affect the origin mark too Si és cert, el desplaçament de la visualització afectarà també la marca d'origen - + If true, the object's label is displayed Si és cert, es visualitza l'etiqueta de l'objecte - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Si està activada, la representació de l’inventor d’aquest objecte es guardarà en el fitxer FreeCAD, i permetrà fer-ne referència en altres fitxers en mode lleuger. - + A slot to save the inventor representation of this object, if enabled Una espai per a guardar la representació de l’inventor d’aquest objecte, si està habilitada - + Cut the view above this level Retalla la vista per damunt d’aquest nivell - + The distance between the level plane and the cut line Distància entre el pla de nivell i la línia de tall - + Turn cutting on when activating this level Activa el tall quan s'activi aquest nivell @@ -1869,22 +1869,22 @@ Com dibuixar les barres - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Això substitueix l’atribut d’amplària per a establir l’amplària de cada segment de mur. S'ignora si l'objecte base proporciona informació d'amplària, amb el mètode getWidths (). (El primer valor substitueix l'atribut d'«amplària» del primer segment de la paret; si un valor és zero, se seguirà el primer valor d'«OverrideWidth») - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Això substitueix l’atribut d’alineació per a establir l’alineació de cada segment de mur. S'ignora si l'objecte base proporciona l'alineació de la informació amb el mètode getAligns (). (El primer valor substituirà l'atribut d'«Alineació» del primer segment del mur; si un valor no és «esquerra, dreta, centre", se seguirà el primer valor d'«OverrideAlign») - + The area of this wall as a simple Height * Length calculation L’àrea d’aquest mur com a simple càlcul d'alçària * llargària - + If True, double-clicking this object in the tree activates it Si és cert, un doble clic sobre aquest objecte en l’arbre, l'activa @@ -2047,7 +2047,7 @@ Arch - + Components Components @@ -2057,7 +2057,7 @@ Components d'aquest objecte - + Axes Eixos @@ -2067,27 +2067,27 @@ Crea l'eix - + Remove Elimina - + Add Afegeix - + Axis Eix - + Distance Distance - + Angle Angle @@ -2197,7 +2197,7 @@ Crea una estructura - + Create Wall Crea un mur @@ -2222,42 +2222,42 @@ Crea una finestra - + Edit Edita - + Create/update component Crea/actualitza el component - + Base 2D object Objecte base 2D - + Wires Filferros - + Create new component Crea un component nou - + Name Nom - + Type Tipus - + Thickness Gruix @@ -2332,22 +2332,22 @@ No s'ha pogut calcular la forma. - + Merge Wall Fusionar Mur - + Please select only wall objects Seleccioneu només objectes mur - + Merge Walls Fusiona els murs - + Distances (mm) and angles (deg) between axes Distàncies (mm) i angles (graus) entre eixos @@ -2798,22 +2798,22 @@ Porta - + Hinge Frontissa - + Opening mode Mode d'obertura - + Get selected edge Obtín la vora seleccionada - + Press to retrieve the selected edge Premeu per a recuperar la vora seleccionada @@ -2843,17 +2843,17 @@ Capa nova - + Wall Presets... Murs predefinits... - + Hole wire Filferro de forat - + Pick selected Tria el seleccionat @@ -2868,67 +2868,67 @@ Crea una quadrícula - + Label Etiqueta - + Axis system components Components del sistema d'eixos - + Grid Quadrícula - + Total width Amplària total - + Total height Alçària total - + Add row Afegeix una fila - + Del row Suprimeix la fila - + Add col Afegeix una columna - + Del col Suprimeix la columna - + Create span Crea una extensió - + Remove span Suprimeix l'extensió - + Rows Files - + Columns Columnes @@ -2943,12 +2943,12 @@ Límits de l'espai - + Error: Unable to modify the base object of this wall Error: No es pot modificar l'objecte base d'aquest mur - + Window elements Elements de finestra @@ -3013,22 +3013,22 @@ Seleccioneu com a mínim un eix - + Auto height is larger than height L'alçada automàtica és més gran que l'alçada - + Total row size is larger than height La mida total de la fila és més gran que l'alçada - + Auto width is larger than width L'amplada automàtica és més gran que l'amplada - + Total column size is larger than width La mida total de la columna és més gran que l'amplada @@ -3243,7 +3243,7 @@ Redimensionar - + Center Centre @@ -3278,12 +3278,12 @@ Intersecció trobada. - + The selected wall contains no subwall to merge El mur seleccionat no conté cap submur per a fusionar - + Cannot compute blocks for wall No es poden calcular els blocs per a la paret @@ -3293,27 +3293,27 @@ Trieu una cara en un objecte existent o seleccioneu una preselecció - + Unable to create component No es pot crear el component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El nombre de fils que defineixen un forat en l'objecte. Un valor de zero automàticament adoptarà el cable més gran - + + default + per defecte - + If this is checked, the default Frame value of this window will be added to the value entered here Si està marcada, el valor per defecte del Marc d'aquesta finestra s'afegirà al valor introduït aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Si està marcada, el valor per defecte del Desplaçament d'aquesta finestra s'afegirà al valor introduït aquí @@ -3468,37 +3468,37 @@ Con&tinua - + First point of wall Primer punt del mur - + Wall options Opcions del mur - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Aquesta llista mostra tots els objectes multimaterials d'aquest document. Creeu-ne alguns per a definir els tipus de mur. - + Alignment Alineació - + Left Esquerra - + Right Dreta - + Use sketches Utilitzi esbossos @@ -3678,17 +3678,17 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Mur - + This window has no defined opening Aquesta finestra no té obertura definida - + Invert opening direction Invertir direcció d'obertura - + Invert hinge position Invertir posició de la frontissa @@ -3927,7 +3927,7 @@ S'interromp la creació de la planta. Arch_AxisTools - + Axis tools Eines d'eixos @@ -4101,62 +4101,62 @@ S'interromp la creació de la planta. Arch_Grid - + The number of rows El nombre de files - + The number of columns El nombre de columnes - + The sizes for rows La mida de les files - + The sizes of columns La mida de les columnes - + The span ranges of cells that are merged together L'abast de cel·les que es fusionen juntes - + The type of 3D points produced by this grid object El tipus de punts 3D produïts per aquest objecte quadrícula - + The total width of this grid L'amplària total d'aquesta quadrícula - + The total height of this grid L'alçària total d'aquesta quadrícula - + Creates automatic column divisions (set to 0 to disable) Crea automàticament divisions de columna (establiu-ho a 0 per a inhabilitar-ho) - + Creates automatic row divisions (set to 0 to disable) Crea automàticament divisions de fila (establiu-ho a 0 per a inhabilitar-ho) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not En mode de punt mitjà de l'aresta, si la quadrícula ha de reorientar els seus fills a llarg de les normals de l'aresta o no - + The indices of faces to hide Els índexs de les cares que s'han d'amagar @@ -4198,12 +4198,12 @@ S'interromp la creació de la planta. Arch_MergeWalls - + Merge Walls Fusiona els murs - + Merges the selected walls, if possible Fusiona els murs seleccionats, si és possible @@ -4578,12 +4578,12 @@ S'interromp la creació de la planta. Arch_Wall - + Wall Mur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un mur a partir de zero o d'un objecte seleccionat (línia, cara o sòlid) @@ -4907,7 +4907,7 @@ Deixeu en blanc per a utilitzar tots els objectes del document Draft - + Writing camera position Escrivint la posició de la càmera diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 3654892b1a..3bd3138645 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ Velikost písma - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts Písmo použité pro texty - + The font size of texts Velikost písma textů - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Komponenty @@ -2057,7 +2057,7 @@ Díly tohoto objektu - + Axes Osy @@ -2067,27 +2067,27 @@ Vytvořit osu - + Remove Odstranit - + Add Přidat - + Axis Osa - + Distance Distance - + Angle Úhel @@ -2197,7 +2197,7 @@ Vytvořit strukturu - + Create Wall Vytvořit zeď @@ -2222,42 +2222,42 @@ Vytvořit okno - + Edit Upravit - + Create/update component Vytvořit/aktualizovat díl - + Base 2D object Základní 2D objekt - + Wires Dráty - + Create new component Vytvořit nový díl - + Name Jméno - + Type Typ - + Thickness Tloušťka @@ -2332,22 +2332,22 @@ Nemohu vyřešit plochu - + Merge Wall Sloučit stěnu - + Please select only wall objects Prosím vyberte pouze objekty stěny - + Merge Walls Sloučit stěny - + Distances (mm) and angles (deg) between axes Vzdálenosti (mm) a úhly (deg) mezi osami @@ -2799,22 +2799,22 @@ Dveře - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ Nová vrstva - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Mřížka - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Střed @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Vlevo - + Right Vpravo - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Zeď - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Sloučit stěny - + Merges the selected walls, if possible Sloučí vybrané zdi @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Zeď - + Creates a wall object from scratch or from a selected object (wire, face or solid) Vytvoří objekt zdi kompletně nebo z vybraného objektu (drát, povrch nebo těleso) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Zápis polohy kamery diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 8807a75780..51d6a5f6d5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -949,32 +949,32 @@ Wenn wahr, wird das Element an Achsen ausgerichtet - + The length of this wall. Not used if this wall is based on an underlying object Die Länge dieser Mauer. Nicht verwendet, wenn diese Wand auf einem zugrunde liegenden Objekt basiert - + The width of this wall. Not used if this wall is based on a face Die Breite dieser Mauer. Nicht verwendet, wenn diese Wand auf einer Fläche basiert - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Die Höhe dieser Mauer. 0 für automatisch. Nicht verwendet, wenn diese Wand auf einem Solid basiert - + The alignment of this wall on its base object, if applicable Die Ausrichtung dieser Wand auf ihrem Grundobjekt, falls zutreffend - + The face number of the base object used to build this wall Die Flächenanzahl des Basisobjekts, das verwendet wurde, um diese Wand zu bauen - + The offset between this wall and its baseline (only for left and right alignments) Der Versatz zwischen dieser Wand und ihrer Grundlinie (nur für linke und rechte Ausrichtung) @@ -1054,7 +1054,7 @@ Die Überlappung der Reihe oberhalb der Unterseite des Profils - + The number of the wire that defines the hole. A value of 0 means automatic Die Anzahl der Kanten, die das Loch definieren. Der Wert 0 bedeutet automatisch @@ -1074,7 +1074,7 @@ Eine Transformation anzuwenden auf jede Bezeichnung - + The axes this system is made of Die Achsen aus denen dieses System besteht @@ -1204,7 +1204,7 @@ Die Schriftgröße - + The placement of this axis system Die Platzierung des Achsensystems @@ -1224,57 +1224,57 @@ Die Linienbreite des Objekts - + An optional unit to express levels Eine optionale Einheit zum Ausdrücken von Ebenen - + A transformation to apply to the level mark Eine Transformation, die auf die Ebenenmarkierung angewendet werden soll - + If true, show the level Wenn ja, zeige die Ebene - + If true, show the unit on the level tag Wenn wahr, zeige die Einheit im Ebenen-Tag an - + If true, when activated, the working plane will automatically adapt to this level Wenn diese Option aktiviert ist, passt sich die Arbeitsebene automatisch an diese Ebene an - + The font to be used for texts Die Schriftart für Texte - + The font size of texts Die Schriftart für Texte - + Camera position data associated with this object Kamerapositionsdaten, die diesem Objekt zugeordnet sind - + If set, the view stored in this object will be restored on double-click Wenn gesetzt, wird die in diesem Objekt gespeicherte Ansicht durch Doppelklick wiederhergestellt - + The individual face colors Individuelle Schriftfarbe für Flächen - + If set to True, the working plane will be kept on Auto mode Bei Einstellung auf True bleibt die Arbeitsebene im Auto-Modus @@ -1419,42 +1419,42 @@ Die Treppenlaufrichtung nach dem Podest - + Enable this to make the wall generate blocks Aktivieren um aus der Wand Blöcke zu erstellen - + The length of each block Die Länge der einzelnen Blöcke - + The height of each block Die Höhe der einzelnen Blöcke - + The horizontal offset of the first line of blocks Der horizontale Offset der ersten Blockreihe - + The horizontal offset of the second line of blocks Der horizontale Offset der zweiten Blockreihe - + The size of the joints between each block Die Größe der Fugen zwischen einzelnen Blöcken - + The number of entire blocks Die Gesamtanzahl der Blöcke - + The number of broken blocks Die Anzahl der gestrichelten Blöcke @@ -1604,27 +1604,27 @@ Die Dicke der Setzstufen - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Wenn wahr, zeig die in diesem Gebäude Building Part befindlichen Objekte, welche die Linien-, Farb- und Transparenz-Einstellungen übernehmen werden - + The line width of child objects Die Linienbreite von Kindobjekten - + The line color of child objects Die Linienfarbe der Kindobjekte - + The shape color of child objects Die Füllfarbe der Kindobjekte - + The transparency of child objects Die Transparenz der Kindobjekte @@ -1644,37 +1644,37 @@ Diese Eigenschaft speichert eine Entwicklerdarstellung für dieses Objekt - + If true, display offset will affect the origin mark too Wenn aktiviert, wird der Anzeige-Versatz auch das Ursprungszeichen beeinflussen - + If true, the object's label is displayed Wenn aktiviert, wird die Bezeichnung des Objekts angezeigt - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Falls aktiviert, wird die Inventar-Darstellung dieses Objekts in der FreeCAD-Datei gespeichert und erlaubt die Darstellung in anderen Projekten im Drahtgitter-Modus. - + A slot to save the inventor representation of this object, if enabled Wenn aktiviert: Ein Objekt-Speicherplatz für die Inventar-Darstellung - + Cut the view above this level Unterdrückt die Ansicht oberhalb dieser Ebene - + The distance between the level plane and the cut line Der Abstand zwischen der Grundriss-Ebene und Schnittlinie - + Turn cutting on when activating this level Mit Aktivierung der Grundrissebene wird das Schnittwerkzeug aktiviert @@ -1869,22 +1869,22 @@ Wie man die Stäbe zeichnen kann - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Setzt die Wandstärke für jedes Segment (überschreibt das Wandstärke Attribut). Wird ignoriert, wenn das Grund-Objekt die Breite mittels getWidths() erhält. (Der erste Wert überschreibt das Wandstärke Attribut für das 1. Segment der Wand. Ist ein Wert null wird der erste Wert von 'OverrideWidth' übernommen) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Setzt die Wandstärke für jedes Segment (überschreibt das Wandstärke Attribut). Wird ignoriert, wenn das Grund-Objekt die Breite mittels getWidths() erhält. (Der erste Wert überschreibt das Wandstärke Attribut für das 1. Segment der Wand. Ist ein Wert null wird der erste Wert von 'OverrideWidth' übernommen) - + The area of this wall as a simple Height * Length calculation Die Wandläche als einfache Höhe * Längenberechnung - + If True, double-clicking this object in the tree activates it Wenn wahr, aktiviert ein Doppelklick im Baum das jeweilige Objekt @@ -2047,7 +2047,7 @@ Arch - + Components Komponenten @@ -2057,7 +2057,7 @@ Komponenten dieses Objektes - + Axes Achsen @@ -2067,27 +2067,27 @@ Achse erzeugen - + Remove Entfernen - + Add Hinzufügen - + Axis Achse - + Distance Abstand - + Angle Winkel @@ -2197,7 +2197,7 @@ Struktur erzeugen - + Create Wall Wand erzeugen @@ -2222,42 +2222,42 @@ Fenster erzeugen - + Edit Bearbeiten - + Create/update component Erstelle / aktualisiere Komponente - + Base 2D object 2D Basisobjekt - + Wires Kantenzüge - + Create new component Neue Komponente erstellen - + Name Name - + Type Typ - + Thickness Dicke @@ -2332,22 +2332,22 @@ Form konnte nicht berechnet werden - + Merge Wall Wand zusammenfügen - + Please select only wall objects Bitte wählen Sie nur Wand Objekte - + Merge Walls Wände zusammenfügen - + Distances (mm) and angles (deg) between axes Abstand (mm) und Winkel (deg) zwischen den Achsen @@ -2799,22 +2799,22 @@ Tür - + Hinge Scharnier - + Opening mode Öffnungsmodus - + Get selected edge Ausgewählte Kante erhalten - + Press to retrieve the selected edge Drücken, um die ausgewählte Kante zu erhalten @@ -2844,17 +2844,17 @@ Neue Ebene - + Wall Presets... Voreinstellung Wand... - + Hole wire Lochkantenzug - + Pick selected Ausgewählte wählen @@ -2869,67 +2869,67 @@ Raster erzeugen - + Label Bezeichnung - + Axis system components Achsensystemkomponenten - + Grid Raster - + Total width Gesamtbreite - + Total height Gesamthöhe - + Add row Zeile hinzufügen - + Del row Zeile entfernen - + Add col Spalte hinzufügen - + Del col Spalte entfernen - + Create span Erstelle Spannweite - + Remove span Entferne Spannweite - + Rows Zeilen - + Columns Spalten @@ -2944,12 +2944,12 @@ Flächenbegrenzungen - + Error: Unable to modify the base object of this wall Error: Der Grundriss dieser Wand konnte nicht geändert werden - + Window elements Fensterelemente @@ -3014,22 +3014,22 @@ Bitte wähle mindestens eine Achse - + Auto height is larger than height Die automatische Höhe ist größer als die manuelle Höhe - + Total row size is larger than height Gesamte Zeilengröße ist größer als die Höhe - + Auto width is larger than width Auto-Breite ist größer als manuelle Breite - + Total column size is larger than width Die Gesamtspaltengröße ist größer als die Breite @@ -3244,7 +3244,7 @@ Größe ändern - + Center Mittelpunkt @@ -3279,12 +3279,12 @@ Schnittpunkt gefunden. - + The selected wall contains no subwall to merge Die ausgewählte Wand enthält keine darunterliegende Wand zum Zusammenführen - + Cannot compute blocks for wall Blöcke für die Wand können nicht berechnet werden @@ -3294,27 +3294,27 @@ Wählen Sie die Oberfläche eines vorhandenen Objekts oder wählen Sie eine Vorgabe - + Unable to create component Konnte Komponente nicht erstellen - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Die Nummer des Kantenzuges der das Loch im Host-Objekt definiert. Der Wert Null wählt automatisch den größten Kantenzug aus - + + default + Standard - + If this is checked, the default Frame value of this window will be added to the value entered here Wenn diese Option aktiviert ist, wird der Standard Rahmenwert dieses Fensters zu dem hier eingegebenen Wert hinzugefügt - + If this is checked, the default Offset value of this window will be added to the value entered here Wenn diese Option aktiviert ist, wird der Standard Versatzwert dieses Fensters zu dem hier eingegebenen Wert addiert @@ -3469,37 +3469,37 @@ Wiederholen - + First point of wall Erster Punkt der Wand - + Wall options Wandoptionen - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Diese Liste zeigt alle Multi-Material-Objekte dieses Dokuments. Erstellen Sie solche, um Wandtypen zu definieren. - + Alignment Ausrichtung - + Left Links - + Right Rechts - + Use sketches Benutze Skizzen @@ -3679,17 +3679,17 @@ Wenn Länge = 0 dann wird der Länge so berechnet, dass die Höhe gleich dem rel Wand - + This window has no defined opening Das Fenster hat keine definierte Öffnung - + Invert opening direction Öffnungsrichtung umkehren - + Invert hinge position Scharnierposition umkehren @@ -3945,7 +3945,7 @@ Geschosserstellung abgebrochen. Arch_AxisTools - + Axis tools Achsenwerkzeuge @@ -4119,62 +4119,62 @@ Geschosserstellung abgebrochen. Arch_Grid - + The number of rows Anzahl von Zeilen - + The number of columns Anzahl von Spalten - + The sizes for rows Größe von Zeilen - + The sizes of columns Größe von Spalten - + The span ranges of cells that are merged together Die Spannweite von Zellen, die zusammengeführt werden - + The type of 3D points produced by this grid object Die Art der 3D-Punkte, die von diesem Rasterobjekt erzeugt wird - + The total width of this grid Die Gesamtbreite dieses Gitters - + The total height of this grid Die Gesamthöhe dieses Rasters - + Creates automatic column divisions (set to 0 to disable) Erstellt automatische Spaltenteilungen (zum Deaktivieren auf 0 gesetzt) - + Creates automatic row divisions (set to 0 to disable) Erstellt automatische Zeileneinteilungen (zum Deaktivieren auf 0 gesetzt) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Wenn im "edge midpoint mode" das Ursprungsgitter entlang der normalen Kannten neu orientieren muss oder nicht - + The indices of faces to hide Den Inhalt der Planfläche verbergen @@ -4216,12 +4216,12 @@ Geschosserstellung abgebrochen. Arch_MergeWalls - + Merge Walls Wände zusammenfügen - + Merges the selected walls, if possible Führt die ausgewählten Wände zusammen, wenn möglich @@ -4596,12 +4596,12 @@ Geschosserstellung abgebrochen. Arch_Wall - + Wall Wand - + Creates a wall object from scratch or from a selected object (wire, face or solid) Erzeuge ein Wandobjekt von Grund auf neu oder von einem ausgewählten Objekt (Kantenzug, Oberfläche oder Volumenkörper) @@ -4930,7 +4930,7 @@ Deaktivieren um alle Objekte des Dokuments zu verwenden Draft - + Writing camera position Kameraposition schreiben diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index a29c0443c5..40bfaa0878 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -949,32 +949,32 @@ Αν αυτό είναι αληθές, τα στοιχεία είναι ευθυγραμμισμένα με άξονες - + The length of this wall. Not used if this wall is based on an underlying object Το μήκος αυτού του τοίχου. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποιο υποκείμενο στοιχείο - + The width of this wall. Not used if this wall is based on a face Το πλάτος αυτού του τοίχου. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποια όψη - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Το ύψος αυτού του τοίχου. Κρατήστε το 0 για αυτόματη επιλογή. Δεν χρησιμοποιείται αν ο εν λόγω τοίχος βασίζεται σε κάποιο στερεό στοιχείο - + The alignment of this wall on its base object, if applicable Η ευθυγράμμιση αυτού του τοίχου πάνω στο αντικείμενο βάσης του, αν είναι εφαρμόσιμο - + The face number of the base object used to build this wall Ο αριθμός όψης του αντικειμένου βάσης που χρησιμοποιήθηκε για την κατασκευή αυτού του τοίχου - + The offset between this wall and its baseline (only for left and right alignments) Η απόσταση μεταξύ του εν λόγω τοίχου και της βασικής γραμμής του (μόνο για ευθυγραμμίσεις στον οριζόντιο άξονα) @@ -1054,7 +1054,7 @@ Η επικάλυψη των χορδιστών πάνω από τη βάση των σκαλοπατιών - + The number of the wire that defines the hole. A value of 0 means automatic Ο αριθμός του σύρματος που ορίζει την οπή. Μια τιμή 0 θα σημάνει αυτόματη επιλογή @@ -1074,7 +1074,7 @@ Ένας μετασχηματισμός για εφαρμογή σε κάθε ετικέτα - + The axes this system is made of Οι άξονες από τους οποίους αποτελείται αυτό το σύστημα @@ -1204,7 +1204,7 @@ Το μέγεθος γραμματοσειράς - + The placement of this axis system Η τοποθέτηση αυτού του συστήματος αξόνων @@ -1224,57 +1224,57 @@ Το πλάτος γραμμής αυτού του αντικειμένου - + An optional unit to express levels Μια προαιρετική μονάδα για την έκφραση των επιπέδων - + A transformation to apply to the level mark Ένας μετασχηματισμός για εφαρμογή σε κάθε ετικέτα - + If true, show the level Εάν είναι αληθές, εμφάνισε το επίπεδο - + If true, show the unit on the level tag Αν είναι αληθές, εμφανίστε τη μονάδα στην ετικέτα επιπέδου - + If true, when activated, the working plane will automatically adapt to this level Αν είναι αληθές, όταν ενεργοποιηθεί, το επίπεδο εργασίας θα προσαρμοστεί αυτόματα σε αυτό το επίπεδο - + The font to be used for texts Η γραμματοσειρά που θα χρησιμοποιείται για τα κείμενα - + The font size of texts Το μέγεθος της γραμματοσειράς των κειμένων - + Camera position data associated with this object Τα δεδομένα θέσης κάμερας συνδέονται με αυτό το αντικείμενο - + If set, the view stored in this object will be restored on double-click Αν οριστεί, η προβολή που είναι αποθηκευμένη σε αυτό το αντικείμενο θα αποκατασταθεί με διπλό κλικ - + The individual face colors Τα χρώματα μεμονωμένης όψης - + If set to True, the working plane will be kept on Auto mode Εάν οριστεί σε Αληθές, το επίπεδο εργασίας θα διατηρηθεί στην Αυτόματη λειτουργία @@ -1419,42 +1419,42 @@ Η κατεύθυνση της πτήσης μετά την προσγείωση - + Enable this to make the wall generate blocks Ενεργοποιήστε αυτό προκειμένου να κάνετε τον τοίχο να δημιουργήσει φραγμούς - + The length of each block Το μήκος κάθε φραγμού - + The height of each block Το ύψος κάθε φραγμού - + The horizontal offset of the first line of blocks Η οριζόντια μετατόπιση της πρώτης σειράς φραγμών - + The horizontal offset of the second line of blocks Η οριζόντια μετατόπιση της δεύτερης σειράς φραγμών - + The size of the joints between each block Το μέγεθος των αρθρώσεων μεταξύ των φραγμών - + The number of entire blocks Ο αριθμός των πλήρων φραγμών - + The number of broken blocks Ο αριθμός των σπασμένων φραγμών @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects Η γραμμή πλάτους των παιδικών αντικειμένων - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Στοιχεία @@ -2057,7 +2057,7 @@ Στοιχεία αυτού του αντικειμένου - + Axes Άξονες @@ -2067,27 +2067,27 @@ Δημιουργήστε Άξονα - + Remove Αφαίρεση - + Add Προσθήκη - + Axis Άξονας - + Distance Distance - + Angle Γωνία @@ -2197,7 +2197,7 @@ Δημιουργήστε Δομή - + Create Wall Δημιουργήστε Τοίχο @@ -2222,42 +2222,42 @@ Δημιουργήστε Παράθυρο - + Edit Επεξεργασία - + Create/update component Δημιουργήστε/ενημερώστε στοιχείο - + Base 2D object Δισδιάστατο αντικείμενο βάσης - + Wires Σύρματα - + Create new component Δημιουργήστε νέο εξάρτημα - + Name Όνομα - + Type Τύπος - + Thickness Πάχος @@ -2332,22 +2332,22 @@ Αδύνατος ο υπολογισμός σχήματος - + Merge Wall Συγχωνεύστε Τοίχο - + Please select only wall objects Παρακαλώ επιλέξτε μόνο στοιχεία τοιχοποιίας - + Merge Walls Συγχωνεύστε Τοίχους - + Distances (mm) and angles (deg) between axes Αποστάσεις (mm) και γωνίες (°) μεταξύ αξόνων @@ -2799,22 +2799,22 @@ Πόρτα - + Hinge Εύκαμπτος σύνδεσμος - + Opening mode Λειτουργία ανοίγματος - + Get selected edge Λάβετε την επιλεγμένη ακμή - + Press to retrieve the selected edge Πιέστε για να ανακτήσετε την επιλεγμένη ακμή @@ -2844,17 +2844,17 @@ Νέο στρώμα - + Wall Presets... Προεπιλογές Τοίχου... - + Hole wire Σύρμα οπής - + Pick selected Διαλέξτε τα επιλεγμένα @@ -2869,67 +2869,67 @@ Δημιουργήστε Κάναβο - + Label Ετικέτα - + Axis system components Στοιχεία του συστήματος αξόνων - + Grid Κάναβος - + Total width Συνολικό πλάτος - + Total height Συνολικό ύψος - + Add row Προσθέστε σειρά - + Del row Διαγράψτε σειρά - + Add col Προσθέστε στήλη - + Del col Διαγράψτε στήλη - + Create span Δημιουργήστε χώρο - + Remove span Αφαιρέστε χώρο - + Rows Σειρές - + Columns Στήλες @@ -2944,12 +2944,12 @@ Όρια χώρου - + Error: Unable to modify the base object of this wall Σφάλμα: Δεν μπορείτε να τροποποιήσετε το αντικείμενο βάση αυτού του τοίχου - + Window elements Στοιχεία παραθύρου @@ -3014,22 +3014,22 @@ Παρακαλώ επιλέξτε τουλάχιστον έναν άξονα - + Auto height is larger than height Το αυτόματο ύψος είναι μεγαλύτερο από το ύψος - + Total row size is larger than height Το συνολικό μέγεθος σειράς είναι μεγαλύτερο από το ύψος - + Auto width is larger than width Το αυτόματο πλάτος είναι μεγαλύτερο από το πλάτος - + Total column size is larger than width Το συνολικό μέγεθος στήλης είναι μεγαλύτερο από το πλάτος @@ -3244,7 +3244,7 @@ Αλλαγή μεγέθους - + Center Κέντρο @@ -3279,12 +3279,12 @@ Σημείο τομής βρέθηκε. - + The selected wall contains no subwall to merge Ο επιλεγμένος τοίχος δεν περιέχει κάποιο υπόβαθρο για να συγχωνεύσετε - + Cannot compute blocks for wall Αδύνατος ο υπολογισμός των φραγμών για τον τοίχο @@ -3294,27 +3294,27 @@ Διαλέξτε μια όψη σε ένα υπάρχον αντικείμενο ή επιλέξτε μια προεπιλεγμένη - + Unable to create component Αδύνατη η δημιουργία εξαρτήματος - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ο αριθμός του σύρματος που ορίζει μια οπή στο γονικό αντικείμενο. Η τιμή μηδέν θα συνεπάγεται την αυτόματη επιλογή του μεγαλύτερου σύρματος - + + default + προεπιλογή - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Συνεχίσ&τε - + First point of wall Πρώτο σημείο του πίνακα - + Wall options Επιλογές τοίχου - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Ευθυγράμμιση - + Left Αριστερά - + Right Δεξιά - + Use sketches Χρησιμοποιήστε σκαριφήματα @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Τοίχος - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Εργαλεία άξονα @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Ο αριθμός σειρών - + The number of columns Ο αριθμός των στηλών - + The sizes for rows Τα μεγέθη για σειρές - + The sizes of columns Τα μεγέθη των στηλών - + The span ranges of cells that are merged together Το εύρος αποστάσεων των κελιών που έχουν συγχωνευθεί - + The type of 3D points produced by this grid object Ο τύπος των τρισδιάστατων σημείων που παράγονται από αυτόν τον κάναβο - + The total width of this grid Το συνολικό πλάτος αυτού του κανάβου - + The total height of this grid Το συνολικό ύψος αυτού του κανάβου - + Creates automatic column divisions (set to 0 to disable) Δημιουργεί αυτόματες κατηγορίες στηλών (ορίστε 0 για απενεργοποίηση) - + Creates automatic row divisions (set to 0 to disable) Δημιουργεί αυτόματες κατηγορίες σειρών (ορίστε 0 για απενεργοποίηση) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Όταν βρίσκεστε σε λειτουργία μέσου σημείου ακμής, εάν αυτός ο κάναβος θα πρέπει να αναπροσανατολίσει τα θυγατρικά στοιχεία του κατά μήκος των καθέτων διανυσμάτων ακμών ή όχι - + The indices of faces to hide Οι δείκτες όψεων προς απόκρυψη @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Συγχωνεύστε Τοίχους - + Merges the selected walls, if possible Συγχωνεύει τους επιλεγμένους τοίχους, αν είναι εφικτό @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Τοίχος - + Creates a wall object from scratch or from a selected object (wire, face or solid) Δημιουργήστε ένα στοιχείο τοιχοποιίας από την αρχή ή από κάποιο επιλεγμένο στοιχείο (σύρμα, επιφάνεια ή στερεό στοιχείο) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Θέση κάμερας εγγραφής diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index 7a90cd16f9..1e333fbfba 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -949,32 +949,32 @@ Si true el elemento está alineado con los ejes - + The length of this wall. Not used if this wall is based on an underlying object La longitud de este muro. No usado si esta pared se basa en un objeto subyacente - + The width of this wall. Not used if this wall is based on a face La anchura de esta pared. No usado si esta pared se basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La altura de esta pared. Dejar el 0 para automático. No usado si esta pared se basa en un sólido - + The alignment of this wall on its base object, if applicable La alineación de este muro sobre su objeto base, si corresponde - + The face number of the base object used to build this wall El número de caras del objeto base utilizado para construir esta pared - + The offset between this wall and its baseline (only for left and right alignments) El desplazamiento entre esta pared y su línea de base (sólo para alineaciones de izquierda y derecha) @@ -1054,7 +1054,7 @@ La superposicion de los largueros sobre la parte inferior de los peldaños - + The number of the wire that defines the hole. A value of 0 means automatic El número del cable que define el agujero. Un valor de 0 significa automático @@ -1074,7 +1074,7 @@ Una transformación para aplicar a cada etiqueta - + The axes this system is made of Los ejes de que esta hecho este sistema @@ -1204,7 +1204,7 @@ El tamaño de la tipografía - + The placement of this axis system La posición de este sistema de ejes @@ -1224,57 +1224,57 @@ El ancho de la linea de este objeto - + An optional unit to express levels Una unidad opcional para expresar niveles - + A transformation to apply to the level mark Una transformación para aplicar a la marca de nivel - + If true, show the level Si es verdadero, muestra el nivel - + If true, show the unit on the level tag Si es verdadero, muestra la unidad en la etiqueta de nivel - + If true, when activated, the working plane will automatically adapt to this level Si es verdadero, cuando está activado, el plano de trabajo se adaptará automáticamente a este nivel - + The font to be used for texts La fuente que se utilizará para los textos - + The font size of texts El tamaño de la fuente de los textos - + Camera position data associated with this object Datos de posición de cámara asociados con este objeto - + If set, the view stored in this object will be restored on double-click Si se establece, la vista almacenada en este objeto se restaurará al hacer doble clic - + The individual face colors Los colores de la cara individual - + If set to True, the working plane will be kept on Auto mode Si es establecido en True, el plano de trabajo se mantendrá en modo automático @@ -1419,42 +1419,42 @@ La dirección de un tramo de escalera después del rellano - + Enable this to make the wall generate blocks Permitir esto para hacer bloques de pared generados - + The length of each block La longitud de cada bloque - + The height of each block El alto de cada bloque - + The horizontal offset of the first line of blocks El desplazamiento horizontal de la primera linea de bloques - + The horizontal offset of the second line of blocks El desplazamiento horizontal de la segunda linea de bloques - + The size of the joints between each block El tamaño de las juntas entre cada bloque - + The number of entire blocks El número de bloques enteros - + The number of broken blocks El número de bloques rotos @@ -1604,27 +1604,27 @@ El espesor de las contrahuellas - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Si es verdadero, mostrar los objetos contenidos en esta Parte del Edificio que adoptarán estos ajustes de línea, color y transparencia - + The line width of child objects Ancho de línea de los objetos hijo - + The line color of child objects El color de línea de los objetos hijo - + The shape color of child objects El color de la forma de los objetos hijo - + The transparency of child objects La transparencia de los objetos hijo @@ -1644,37 +1644,37 @@ Esta propiedad almacena una representación del inventor para este objeto - + If true, display offset will affect the origin mark too Si es verdadero, cuando está activado, DisplayOffset también afectará la marca de origen - + If true, the object's label is displayed Si es verdadero, se muestra la etiqueta del objeto - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Si esto está habilitado, la representación inventor de este objeto se guardará en el archivo FreeCAD, permitiendo referenciarlo en otros archivos en modo ligero. - + A slot to save the inventor representation of this object, if enabled Una ranura para guardar la representación del inventor de este objeto, si está habilitado - + Cut the view above this level Cortar la vista sobre este nivel - + The distance between the level plane and the cut line La distancia entre el plano de nivel y la línea de corte - + Turn cutting on when activating this level Activar corte al activar este nivel @@ -1869,22 +1869,22 @@ Cómo dibujar los travesaños - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Esto anula el atributo Ancho para establecer el ancho de cada segmento de pared. Ignorado si el objeto Base proporciona información de anclas, con el método getWidths(). (El primer valor anular el atributo 'Ancho' para el primer segmento de pared; si un valor es cero, se seguirá el 1er valor de 'Ancho de Ancho') - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Esto anula el atributo Ancho para establecer el ancho de cada segmento de pared. Ignorado si el objeto Base proporciona información de anclas, con el método getWidths(). (El primer valor anular el atributo 'Ancho' para el primer segmento de pared; si un valor es cero, se seguirá el 1er valor de 'Ancho de Ancho') - + The area of this wall as a simple Height * Length calculation El área de esta pared como una altura simple * Cálculo de longitud - + If True, double-clicking this object in the tree activates it Si es «True», al hacer doble clic en este objeto en el árbol, se activa @@ -2047,7 +2047,7 @@ Arch - + Components Componentes @@ -2057,7 +2057,7 @@ Componentes de este objeto - + Axes Ejes @@ -2067,27 +2067,27 @@ Crear eje - + Remove Quitar - + Add Añadir - + Axis Eje - + Distance Distancia - + Angle Ángulo @@ -2197,7 +2197,7 @@ Crear estructura - + Create Wall Crear muro @@ -2222,42 +2222,42 @@ Crear la ventana - + Edit Editar - + Create/update component Crear/actualizar componente - + Base 2D object Objeto base 2D - + Wires Alambres - + Create new component Crear nuevo componente - + Name Nombre - + Type Tipo - + Thickness Espesor @@ -2332,22 +2332,22 @@ No se pudo procesar una figura - + Merge Wall Unir Muro - + Please select only wall objects Por favor seleccione sólo objetos muro - + Merge Walls Unir Muros - + Distances (mm) and angles (deg) between axes Distancias (mm) y ángulos (grados) entre ejes @@ -2799,22 +2799,22 @@ Puerta - + Hinge Bisagra - + Opening mode Modo de apertura - + Get selected edge Obtener la arista seleccionada - + Press to retrieve the selected edge Presione para recuperar la arista seleccionada @@ -2844,17 +2844,17 @@ Nueva capa - + Wall Presets... Ajustes preestablecidos de la pared... - + Hole wire Agujero - + Pick selected Elegir lo seleccionado @@ -2869,67 +2869,67 @@ Crear cuadrícula - + Label Etiqueta - + Axis system components Componentes del sistema de ejes - + Grid Rejilla - + Total width Ancho total - + Total height Altura total - + Add row Agregar fila - + Del row Borrar Fila - + Add col Agregar Columna - + Del col Borrar Columna - + Create span Crear Claro - + Remove span Quitar Claro - + Rows Filas - + Columns Columnas @@ -2944,12 +2944,12 @@ Fronteras de espacio - + Error: Unable to modify the base object of this wall Error: No se puede modificar el objeto base de esta pared - + Window elements Elementos de la ventana @@ -3014,22 +3014,22 @@ Por favor seleccione al menos un eje - + Auto height is larger than height El alto automático es mayor que el alto - + Total row size is larger than height El tamaño total de la fila es mayor que el alto - + Auto width is larger than width El ancho automático es mayor que el ancho - + Total column size is larger than width El total de columnas es mayor que el ancho @@ -3244,7 +3244,7 @@ Redimensionar - + Center Centro @@ -3279,12 +3279,12 @@ Intersección encontrada. - + The selected wall contains no subwall to merge La pared seleccionada no contiene subparedes para unir - + Cannot compute blocks for wall No se puede calcular los bloques para la pared @@ -3294,27 +3294,27 @@ Elige una cara en un objeto existente o seleccione por defecto - + Unable to create component No se ha podido crear el componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El número del alambre que define un agujero en el objeto huésped. Un valor de cero adoptará automáticamente el alambre más grande - + + default + por defecto - + If this is checked, the default Frame value of this window will be added to the value entered here Si se marca esta opción, el valor predeterminado del Marco de esta ventana se agregará al valor ingresado aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Si se marca esta opción, el valor predeterminado de Offset de esta ventana se agregará al valor ingresado aquí @@ -3469,37 +3469,37 @@ Repetir - + First point of wall Primer punto del muro - + Wall options Opciones de muro - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Esta lista muestra todos los objetos MultiMaterials de este documento. Crea algunos para definir tipos de muro. - + Alignment Alineación - + Left Izquierda - + Right Derecha - + Use sketches Utilizar bocetos @@ -3679,17 +3679,17 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Muro - + This window has no defined opening Esta ventana no tiene una apertura definida - + Invert opening direction Invertir la dirección de apertura - + Invert hinge position Invertir la posición de la bisagra @@ -3945,7 +3945,7 @@ Creación de piso cancelada. Arch_AxisTools - + Axis tools Herramientas de ejes @@ -4119,62 +4119,62 @@ Creación de piso cancelada. Arch_Grid - + The number of rows El número de filas - + The number of columns El número de columnas - + The sizes for rows Los tamaños de las filas - + The sizes of columns Los tamaños de las columnas - + The span ranges of cells that are merged together Los rangos de anchura de las celdas que se fusionan - + The type of 3D points produced by this grid object El tipo de puntos 3D producidos por este objeto cuadrícula - + The total width of this grid El ancho total de esta cuadrícula - + The total height of this grid La altura total de esta cuadrícula - + Creates automatic column divisions (set to 0 to disable) Crea divisiones de columna automática (establecer a 0 para desactivar) - + Creates automatic row divisions (set to 0 to disable) Crea divisiones de fila automáticas (establecer a 0 para desactivar) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not En modo punto medio de la arista, si esta cuadrícula debe reorientar a sus hijos a lo largo de las normales de las aristas o no - + The indices of faces to hide Los índices de las caras a ocultar @@ -4216,12 +4216,12 @@ Creación de piso cancelada. Arch_MergeWalls - + Merge Walls Unir Muros - + Merges the selected walls, if possible Une las paredes seleccionadas si es posible @@ -4596,12 +4596,12 @@ Creación de piso cancelada. Arch_Wall - + Wall Muro - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un objeto muro desde cero o a partir de un objeto seleccionado (contorno, cara o sólido) @@ -4929,7 +4929,7 @@ Ifc Type: Pared. Sólo considerará aquellos objetos cuyo Tipo de Ifc es Pared. Draft - + Writing camera position Escribir posición de la cámara diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index f43c8aec70..a0e484d808 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index 9b738b0710..ee18e279a3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -949,32 +949,32 @@ Egia bada, elementuak ardatzekin lerrokatuta daude - + The length of this wall. Not used if this wall is based on an underlying object Pareta honen luzera. Ez erabili pareta hau azpiko objektu batean oinarriturik badago - + The width of this wall. Not used if this wall is based on a face Pareta honen zabalera. Ez erabili aurpegi batean oinarriturik badago - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Pareta honen altuera. Mantendu 0 automatiko egiteko. Ez erabili pareta hau solido batean oinarriturik badago - + The alignment of this wall on its base object, if applicable Pareta honen lerrokatzea bere oinarri-objektuarekiko, aplikagarria bada - + The face number of the base object used to build this wall Pareta hau eraikitzeko erabili den oinarri-objektuaren aurpegi kopurua - + The offset between this wall and its baseline (only for left and right alignments) Pareta honen eta bere oinarri-lerroaren arteko desplazamendua (ezkerreko eta eskuineko lerrokatzeetarako soilik) @@ -1054,7 +1054,7 @@ Zankabeen gainjartzea mailagainen behealdearen gainetik - + The number of the wire that defines the hole. A value of 0 means automatic Zuloa definitzen duen alanbrearen zenbakia. 0 balioak automatikoa esan nahi du @@ -1074,7 +1074,7 @@ Etiketa bakoitzari aplikatuko zaio transformazio bat - + The axes this system is made of Sistema hau osatzen duten ardatzak @@ -1204,7 +1204,7 @@ Letra-tamaina - + The placement of this axis system Ardatz-sistema honen kokapena @@ -1224,57 +1224,57 @@ Objektu honen lerro-zabalera - + An optional unit to express levels Mailak adierazteko aukerazko unitatea - + A transformation to apply to the level mark Mailako markari aplikatzeko eraldaketa - + If true, show the level Egia bada, erakutsi maila - + If true, show the unit on the level tag Egia bada, erakutsi mailako etiketaren unitatea - + If true, when activated, the working plane will automatically adapt to this level Egia bada, aktiboa dagoenean, laneko planoa automatikoki egokituko da maila horretara - + The font to be used for texts Testuetarako erabiliko den letra-tipoa - + The font size of texts Testuen letra-tamaina - + Camera position data associated with this object Objektu honi lotutako kameraren posizio datuak - + If set, the view stored in this object will be restored on double-click Ezartzen bada, objektu honetan gordetako ikuspegia berrezarriko da klik bikoitza egitean - + The individual face colors Aurpegiko kolore indibidualak - + If set to True, the working plane will be kept on Auto mode Egia ezarri bada, laneko planoa modu automatikoan mantenduko da @@ -1419,42 +1419,42 @@ Hegaldiaren norabidea lurreratu ondoren - + Enable this to make the wall generate blocks Gaitu hau paretak blokeak sor ditzan - + The length of each block Bloke bakoitzaren luzera - + The height of each block Bloke bakoitzaren altuera - + The horizontal offset of the first line of blocks Blokeen lehen lerroaren desplazamendu horizontala - + The horizontal offset of the second line of blocks Blokeen bigarren lerroaren desplazamendu horizontala - + The size of the joints between each block Blokeen arteko elkarguneen tamaina - + The number of entire blocks Bloke osoen kopurua - + The number of broken blocks Bloke hautsien kopurua @@ -1604,27 +1604,27 @@ Kontramailen lodiera - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Egia bada, eraikin-pieza honek dituen objektuek lerro, kolore eta gardentasuneko ezarpen hauek hartuko dituzte - + The line width of child objects Objektu haurren lerro-zabalera - + The line color of child objects Objektu haurren lerro-kolorea - + The shape color of child objects Objektu haurren forma-kolorea - + The transparency of child objects Objektu haurren gardentasuna @@ -1644,37 +1644,37 @@ Propietate honek objektu honen asmatzaile-adierazpen bat gordetzen du - + If true, display offset will affect the origin mark too Egia bada, pantailaren desplazamenduak jatorriaren markari ere eragingo dio - + If true, the object's label is displayed Egia bada, objektuaren etiketa bistaratuko da - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Hau gaituta badago, objektu honen asmatzaile-adierazpena FreeCAD fitxategian gordeko da, eta beste fitxategi batzuetan modu arinean erreferentziatzea ahalbidetuko da. - + A slot to save the inventor representation of this object, if enabled Objektu honen asmatzaile-adierazpena gordetzeko arteka bat, gaituta badago - + Cut the view above this level Moztu bista maila honen gainetik - + The distance between the level plane and the cut line Maila-planoaren eta mozte-lerroaren arteko distantzia - + Turn cutting on when activating this level Aktibatu moztea maila hau aktibatzen denean @@ -1869,22 +1869,22 @@ Nola marraztu hagak - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Honek zabalera-atributua gainidazten du, paretaren segmentu bakoitzeko zabalera ezartzeko. Ez ikusiarena egiten zaio oinarri-objektuak zabaleren informazioa ematen badu getWidths() metodoarekin. Lehen balioak paretaren lehen segmentuaren 'Zabalera' atributua gainidazten du; balio bat zero bada, zabalera gainidaztearen lehen balioak jarraituko dio. - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Honek lerrokatze-atributua gainidazten du, paretaren segmentu bakoitzeko lerrokatzea ezartzeko. Ez ikusiarena egiten zaio oinarri-objektuak lerrokatzearen informazioa ematen badu getAligns() metodoarekin. Lehen balioak paretaren lehen segmentuaren 'Lerrokatzea' atributua gainidazten du; balio bat zero bada, lerrokatzea gainidaztearen lehen balioak jarraituko dio. - + The area of this wall as a simple Height * Length calculation Pareta honen area, altuera*luzera kalkulu sinple gisa - + If True, double-clicking this object in the tree activates it Egia bada, zuhaitzean objektu honen gainean klik bikoitza eginda aktibatu egiten da @@ -2016,22 +2016,22 @@ The thickness of the lower floor slab - The thickness of the lower floor slab + Beheko solairuaren xaflaren lodiera The thickness of the upper floor slab - The thickness of the upper floor slab + Goiko solairuaren xaflaren lodiera The type of connection between the lower slab and the start of the stairs - The type of connection between the lower slab and the start of the stairs + Beheko xaflaren eta eskailera-hasieraren arteko konexio mota The type of connection between the end of the stairs and the upper floor slab - The type of connection between the end of the stairs and the upper floor slab + Eskailera-amaieraren eta goiko solairuaren xaflaren arteko konexio mota @@ -2047,7 +2047,7 @@ Arch - + Components Osagaiak @@ -2057,7 +2057,7 @@ Objektu honen osagaiak - + Axes Ardatzak @@ -2067,27 +2067,27 @@ Sortu ardatza - + Remove Kendu - + Add Gehitu - + Axis Ardatza - + Distance Distantzia - + Angle Angelua @@ -2197,7 +2197,7 @@ Sortu azpiegitura - + Create Wall Sortu pareta @@ -2222,42 +2222,42 @@ Sortu Leiho - + Edit Editatu - + Create/update component Sortu/eguneratu osagaia - + Base 2D object 2D-oinarri objektua - + Wires Alanbreak - + Create new component Osagai berria sortu - + Name Izena - + Type Mota - + Thickness Lodiera @@ -2332,22 +2332,22 @@ Ezin izan da forma bat kalkulatu - + Merge Wall Fusionatu pareta - + Please select only wall objects Hautatu pareta-objektuak soilik - + Merge Walls Fusionatu paretak - + Distances (mm) and angles (deg) between axes Ardatzen arteko distantziak (mm) eta angeluak (deg) @@ -2799,22 +2799,22 @@ Atea - + Hinge Gontza - + Opening mode Irekitze modua - + Get selected edge Hartu hautatutako ertza - + Press to retrieve the selected edge Sakatu hautatutako ertza atzitzeko @@ -2844,17 +2844,17 @@ Geruza berria - + Wall Presets... Pareta-aurrezarpenak... - + Hole wire Zulo-alanbrea - + Pick selected Hartu hautatua @@ -2869,67 +2869,67 @@ Sortu sareta - + Label Etiketa - + Axis system components Ardatz-sistemaren osagaiak - + Grid Sareta - + Total width Zabalera totala - + Total height Altuera totala - + Add row Gehitu errenkada - + Del row Ezabatu errenkada - + Add col Gehitu zutabea - + Del col Ezabatu zutabea - + Create span Sortu argia - + Remove span Kendu argia - + Rows Errenkadak - + Columns Zutabeak @@ -2944,12 +2944,12 @@ Espazio-mugak - + Error: Unable to modify the base object of this wall Errorea: Ezin izan da aldatu pareta honen oinarri-objektua - + Window elements Leiho-elementuak @@ -3014,22 +3014,22 @@ Hautatu gutxienez ardatz bat - + Auto height is larger than height Altuera automatikoa altuera baino luzeagoa da - + Total row size is larger than height Errenkada-tamaina totala altuera baino luzeagoa da - + Auto width is larger than width Zabalera automatikoa zabalera baino luzeagoa da - + Total column size is larger than width Zutabe-tamaina totala zabalera baino luzeagoa da @@ -3244,7 +3244,7 @@ Aldatu tamaina - + Center Zentroa @@ -3279,12 +3279,12 @@ Ebakidura aurkitu da. - + The selected wall contains no subwall to merge Hautatutako paretak ez dauka azpiparetarik fusionatzeko - + Cannot compute blocks for wall Ezin dira blokeak kalkulatu paretarako @@ -3294,27 +3294,27 @@ Aukeratu lehendik dagoen objektu baten aurpegi bat edo hautatu aurrezarpen bat - + Unable to create component Ezin izan da osagaia sortu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ostalari-objektuan zulo bat definitzen duen alanbrearen zenbakia. Zero balioak alanbrerik luzeena hartuko du automatikoki - + + default + lehenetsia - + If this is checked, the default Frame value of this window will be added to the value entered here Hau markatuta badago, leiho honen markoaren balio lehenetsia hemen sartutako balioari gehituko zaio - + If this is checked, the default Offset value of this window will be added to the value entered here Hau markatuta badago, leiho honen desplazamenduaren balio lehenetsia hemen sartutako balioari gehituko zaio @@ -3469,37 +3469,37 @@ Ja&rraitu - + First point of wall Paretaren lehen puntua - + Wall options Pareta-aukerak - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Zerrenda honek dokumentuko material anitzeko objektu guztiak erakusten ditu. Sortu batzuk pareta motak definitzeko. - + Alignment Lerrokatzea - + Left Ezkerrekoa - + Right Eskuinekoa - + Use sketches Erabili krokisak @@ -3679,17 +3679,17 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Pareta - + This window has no defined opening Leiho honek ez du irekierarik definituta - + Invert opening direction Alderantzikatu irekitze-norabidea - + Invert hinge position Alderantzikatu gontzaren kokalekua @@ -3945,7 +3945,7 @@ Solairuaren sorrera utzi egin da. Arch_AxisTools - + Axis tools Ardatz-tresnak @@ -4119,62 +4119,62 @@ Solairuaren sorrera utzi egin da. Arch_Grid - + The number of rows Errenkada kopurua - + The number of columns Zutabe kopurua - + The sizes for rows Errenkaden tamainak - + The sizes of columns Zutabeen tamainak - + The span ranges of cells that are merged together Elkarrekin fusionatu diren gelaxken bitarte-barrutiak - + The type of 3D points produced by this grid object Sareta-objektu honek sortutako 3D puntuen mota - + The total width of this grid Sareta honen zabalera totala - + The total height of this grid Sareta honen altuera totala - + Creates automatic column divisions (set to 0 to disable) Zutabe-zatiketa automatikoak sortzen ditu (ezarri 0 desgaitzeko) - + Creates automatic row divisions (set to 0 to disable) Errenkada-zatiketa automatikoak sortzen ditu (ezarri 0 desgaitzeko) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Ertzen erdiko puntuen moduan egonez gero, sareta honek bere haurrak ertzen normaletan zehar orientatu behar dituen ala ez - + The indices of faces to hide Ezkutatuko diren aurpegien indizeak @@ -4216,12 +4216,12 @@ Solairuaren sorrera utzi egin da. Arch_MergeWalls - + Merge Walls Fusionatu paretak - + Merges the selected walls, if possible Hautatutako paretak fusionatzen ditu, posible bada @@ -4596,12 +4596,12 @@ Solairuaren sorrera utzi egin da. Arch_Wall - + Wall Pareta - + Creates a wall object from scratch or from a selected object (wire, face or solid) Pareta-objektu bat sortzen du, zerotik hasita edo hautatutako alanbre, aurpegi edo solido batetik @@ -4925,7 +4925,7 @@ Utzi hutsik dokumentuko objektu guztiak erabili daitezen. Draft - + Writing camera position Kamera-kokapena idazten diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 970335864e..abf6e2b7e2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -949,32 +949,32 @@ Jos tosi, elementti on linjattu akselien kanssa - + The length of this wall. Not used if this wall is based on an underlying object Seinän pituus. Ei käytössä, jos tämä seinä perustuu taustalla olevaan objektiin - + The width of this wall. Not used if this wall is based on a face Seinän pituus. Ei käytetä, jos tämä seinä pohjautuu pintamuotoon - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Seinän korkeus. Pidä nollassa, jos haluat automaattisen korkeuden. Ei käytössä, jos seinä pohjautuu solidiin - + The alignment of this wall on its base object, if applicable Seinän linjaus perusobjektin mukaan, jos se on sovellettavissa - + The face number of the base object used to build this wall Seinän luomisessa käytettävien perusobjektin pintojen määrä - + The offset between this wall and its baseline (only for left and right alignments) Tämän seinän ja sen peruslinjan välinen siirtymä (vain vasempaan ja oikeaan tasaukseen) @@ -1054,7 +1054,7 @@ Sivujohteiden ylimeno askelmien alareunan yläpuolella - + The number of the wire that defines the hole. A value of 0 means automatic Reikää määrittävän lankojen lukumäärä. Arvo 0 tarkoittaa automaattista määrittelyä @@ -1074,7 +1074,7 @@ Kussakin etiketissä sovellettava muutos - + The axes this system is made of Tämän järjestelmän akselit on valmistettu @@ -1204,7 +1204,7 @@ Kirjasimen koko - + The placement of this axis system Tämän akselijärjestelmän sijoittelu @@ -1224,57 +1224,57 @@ Tämän objektin viivan leveys - + An optional unit to express levels Valinnainen yksikkö tasojen ilmaisemiseksi - + A transformation to apply to the level mark Transformaatio, joka koskee tasomerkkiä - + If true, show the level Jos tosi, näytä taso - + If true, show the unit on the level tag Jos tosi, näytä yksikkö tason tagissa - + If true, when activated, the working plane will automatically adapt to this level Jos tosi, kun se aktivoituu, työtaso mukautuu automaattisesti tälle tasolle - + The font to be used for texts Kirjasin, jota käytetään teksteissä - + The font size of texts Tekstien kirjasinkoko - + Camera position data associated with this object Kameran sijaintitiedot liittyvät tähän objektiin - + If set, the view stored in this object will be restored on double-click Jos asetettu, tähän objektiin tallennettu näkymä palautetaan kaksoisklikkauksella - + The individual face colors Yksittäiset näkymäpintojen värit - + If set to True, the working plane will be kept on Auto mode Jos valinta on totta, työtaso säilytetään automaattisessa tilassa @@ -1419,42 +1419,42 @@ Portaikon suunta porrastasanteen jälkeen - + Enable this to make the wall generate blocks Ota tämä käyttöön, jos haluat luoda seinän tekemään lohkoja - + The length of each block Kunkin lohkon pituus - + The height of each block Kunkin lohkon korkeus - + The horizontal offset of the first line of blocks Lohkojen ensimmäisen linjan vaakasuora siirtymä - + The horizontal offset of the second line of blocks Lohkojen toisen linjan vaakasuora siirtymä - + The size of the joints between each block Liitosten koko jokaisen lohkon välillä - + The number of entire blocks Kaikkien lohkojen määrä - + The number of broken blocks Rikkoutuneiden lohkojen lukumäärä @@ -1604,27 +1604,27 @@ Askelmien paksuus - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Jos tosi, näytä tämän rakennusosan sisältämät objektit, mitkä omivat nämä linjojen, värien ja läpinäkyvyyden asetukset - + The line width of child objects Aliobjektien viivan leveys - + The line color of child objects Aliobjektien viivan väri - + The shape color of child objects Aliobjektien muodon väri - + The transparency of child objects Aliobjektien läpinäkyvyys @@ -1644,37 +1644,37 @@ Tämä ominaisuus tallentaa keksijäesityksen tälle objektille - + If true, display offset will affect the origin mark too Jos tosi, näytön siirtymä vaikuttaa myös alkuperäiseen merkkiin - + If true, the object's label is displayed Jos tosi, objektin nimi näytetään - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Jos tämä on käytössä, niin tämän objektin keksijäesitys tallennetaan FreeCAD-tiedostoon, mikä mahdollistaa siihen viittaamisen muissa tiedostoissa kevyessä tilassa. - + A slot to save the inventor representation of this object, if enabled Paikka tämän objektin keksijäesityksen tallentamiseksi, jos se on käytössä - + Cut the view above this level Leikkaa näkymä tämän tason yläpuolelle - + The distance between the level plane and the cut line Perustason ja leikkauslinjan välinen etäisyys - + Turn cutting on when activating this level Ota leikkaus käyttöön, kun aktivoit tämän tason @@ -1869,22 +1869,22 @@ Kuinka piirtää sauvat - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Tämä ohittaa leveysmääritteen, joka asettaa jokaisen seinäsegmentin leveyden. Ei käytetä, jos perusobjekti tarjoaa leveystietoja getWidths()-menetelmällä. (1. arvo ohittaa 'Width' määritteen ensimmäiselle seinäsegmentille; jos arvo on nolla, seurataan 'OverrideWidth' -määritteen ensimmäistä arvoa) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Tämä ohittaa kohdistusmääritteen, joka asettaa jokaisen seinäsegmentin kohdistamisen. Ei käytetä, jos perusobjekti tarjoaa kohdistustiedot getAligns() menetelmällä. (1. arvo ohittaa 'Tasaus' -määritteen ensimmäiselle seinäsegmentille; jos arvo ei ole 'vasen, oikea, keskipiste',' seurataan OverrideAlingn' -määritteen ensimmäistä arvoa) - + The area of this wall as a simple Height * Length calculation Tämän seinän pinta-ala yksinkertaisella korkeus * pituus laskennalla - + If True, double-clicking this object in the tree activates it Jos Totta, kaksoisnapsauttamalla tätä objektia puussa se aktivoi objektin @@ -2047,7 +2047,7 @@ Arch - + Components Osat @@ -2057,7 +2057,7 @@ Tämän objektin osat - + Axes Akselit @@ -2067,27 +2067,27 @@ Luo akseli - + Remove Poista - + Add Lisää - + Axis Akseli - + Distance Etäisyys - + Angle Kulma @@ -2197,7 +2197,7 @@ Luo rakenne - + Create Wall Luo seinä @@ -2222,42 +2222,42 @@ Luo ikkuna - + Edit Muokkaa - + Create/update component Luo/päivitä osa - + Base 2D object Perustana oleva 2D objekti - + Wires Langat - + Create new component Luo uusi komponentti - + Name Nimi - + Type Tyyppi - + Thickness Paksuus @@ -2332,22 +2332,22 @@ Ei voitu laskea muotoa - + Merge Wall Yhdistä seinä - + Please select only wall objects Valitse vain seinäkohteita - + Merge Walls Yhdistä seinät - + Distances (mm) and angles (deg) between axes Etäisyydet (mm) ja kulmat (astetta) akselien väliselle @@ -2799,22 +2799,22 @@ Ovi - + Hinge Sarana - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ Uusi kerros - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Ruudukko - + Total width Yhteiskorkeus - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Keskikohta @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Vasen - + Right Oikea - + Use sketches Käytä luonnoksia @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Seinä - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Akselityökalut @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Rivien määrä - + The number of columns The number of columns - + The sizes for rows Rivien koot - + The sizes of columns Sarakkeiden koko - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object Tämän ruudukko-objektin tuottama 3D-pisteiden tyyppi - + The total width of this grid Tämän ruudukon kokonaisleveys - + The total height of this grid Tämän ruudukon kokonaiskorkeus - + Creates automatic column divisions (set to 0 to disable) Luo automaattiset sarakejakaumat (aseta arvoon 0 poistaaksesi tämä käytöstä) - + Creates automatic row divisions (set to 0 to disable) Luo automaattiset rivijakaumat (aseta arvoon 0 poistaaksesi tämä käytöstä) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Kun on reunan keskipiste -tilassa, niin onko tämän ruudukon alikohteet pitkin reunojen normaaleja suunnattava uudelleen vai ei - + The indices of faces to hide Pintojen indeksit, jotka piilotetaan @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Yhdistä seinät - + Merges the selected walls, if possible Yhdistää valitut seinät, jos mahdollista @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Seinä - + Creates a wall object from scratch or from a selected object (wire, face or solid) Luo seinä-objektin piirroista tai valitusta objektista (lanka, pinta tai kiinteä) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.ts b/src/Mod/Arch/Resources/translations/Arch_fil.ts index e31dd681c1..2e9a6f167d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fil.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fil.ts @@ -949,32 +949,32 @@ Kung totoo ang mga elemento ay nakaayon sa mga palakol - + The length of this wall. Not used if this wall is based on an underlying object Ang haba ng pader na ito ay. Wag gamitin kapag ang pader ay nakabase sa nasa-ilalim na bagay - + The width of this wall. Not used if this wall is based on a face Ang lawak ng pader na ito. Hindi ginamit kung ang pader na ito ay batay sa isang mukha - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Ang taas ng pader na ito. Panatilihin ang 0 para sa awtomatikong. Hindi ginamit kung ang pader na ito ay batay sa isang solid - + The alignment of this wall on its base object, if applicable Ang pag-pila ng pader na ito sa base object nito, kung naaangkop - + The face number of the base object used to build this wall Ang harapang bilang ng base object na ginamit upang itayo ang pader na ito - + The offset between this wall and its baseline (only for left and right alignments) Ang offset sa pagitan ng pader na ito at pangunahing linya nito (para lamang sa kaliwa at kanang alignment) @@ -1054,7 +1054,7 @@ Ang overlap ng stringers sa itaas ng ibaba ng treads - + The number of the wire that defines the hole. A value of 0 means automatic Ang bilang ng kawad na tumutukoy sa butas. Ang isang halaga ng 0 ay nangangahulugang awtomatiko @@ -1074,7 +1074,7 @@ Isang pagbabago na ilalapat sa bawat label - + The axes this system is made of Ang mga axes na ito ay ginawa ng sistema @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Mga component @@ -2057,7 +2057,7 @@ Ang mga bahagi ng mga bagay na ito - + Axes Palakol @@ -2067,27 +2067,27 @@ Gumawa ng aksis - + Remove Ihiwalay - + Add Magdugtong - + Axis Aksis - + Distance Distance - + Angle Anggulo @@ -2197,7 +2197,7 @@ Gunawa ng istraktura - + Create Wall Gumawa ng pader @@ -2222,42 +2222,42 @@ Gumawa ng bintana - + Edit I-edit - + Create/update component Gumawa ng/bagong bahagi - + Base 2D object Patungan ng 2D na mga bagay - + Wires Mga kable - + Create new component Gumawa ng mga bagong bahagi - + Name Pangalan - + Type Uri - + Thickness Kapal @@ -2332,22 +2332,22 @@ Hindi makwenta ang isang hugis - + Merge Wall Pinagsamang Pader - + Please select only wall objects Pakiusap pumili lamang ng mga bagay sa pader - + Merge Walls Pinagsamang Pader - + Distances (mm) and angles (deg) between axes Ang distansya ng (mm) at anggulo ay (deg) sa pagitan ng palakol @@ -2799,22 +2799,22 @@ Pintuan - + Hinge Bisagra - + Opening mode Bukas na kalakaran - + Get selected edge Kuhain ang napiling talim - + Press to retrieve the selected edge Pindutin para maibilaik ang mga napiling bahagi ng @@ -2844,17 +2844,17 @@ Bagong latag - + Wall Presets... Pagkakagawa sa pader... - + Hole wire Butas ng kable - + Pick selected Pumili ng napili @@ -2869,67 +2869,67 @@ Gumawa ng Grid - + Label Magtanda - + Axis system components Mga sangkap ng Axis sistema - + Grid Grid - + Total width Kabuuang lawak - + Total height Kabuuang tugatog - + Add row Magdagdag ng hilera - + Del row Del hilera - + Add col Magpuno ng col - + Del col Del hanay - + Create span Gumawa Dangkal - + Remove span Alisin ang dangkal - + Rows Mga Hanay - + Columns Hilera @@ -2944,12 +2944,12 @@ Mga hangganan ng puwang - + Error: Unable to modify the base object of this wall Error: Hindi ma-modify ang base bagay ng pader na ito - + Window elements Mga pasimulang aral ng window @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Sentro @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Kaliwa - + Right Kanan - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Pader - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Mga kasangkapan na aksis @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Ang bilang ng mga hanay - + The number of columns Ang bilang ng mga hilera - + The sizes for rows Ang mga sukat para sa hanay - + The sizes of columns Ang mga sukat para sa hilera - + The span ranges of cells that are merged together Ang haba ng tinatanatagal ng mga cells sa pagsasanabi na magkasama - + The type of 3D points produced by this grid object Ang uri ng 3D na ito ay nagawa sa pamamagitan ng mga bagay na parilya - + The total width of this grid Ang kabuuang lapad ng parilya na ito - + The total height of this grid Ang kabuuang taas ng parilya na ito - + Creates automatic column divisions (set to 0 to disable) Gumawa ng hanay na awtomatikong dibisyon (itinakda sa 0 upang hindi mapagana) - + Creates automatic row divisions (set to 0 to disable) Gumawa ng hilera na awtomatikong dibisyon (itinakda sa 0 upang hindi mapagana) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Kapag nasa gilid ng gituldok na paraan, kailangan masabihan ang mga bata na nasa kahabaan ng gilid kung normal ba o hindi - + The indices of faces to hide Ang indeks ng mukha para itago ang @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Pinagsamang Pader - + Merges the selected walls, if possible Kung maaring pagsamahin ang mga napiling haligi @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Pader - + Creates a wall object from scratch or from a selected object (wire, face or solid) Gumawa ng isang pader ng mga bagay na nag mula sa simula o mula sa mga bagay na pagpipilian (kable, mukha o solido) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Pagsusulat ng posisyon ng kamera diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 24c5e3a2ff..642c9180cc 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -949,32 +949,32 @@ Si VRAI, l'élément est aligné avec les axes - + The length of this wall. Not used if this wall is based on an underlying object La longueur de ce mur. Pas utilisé si ce mur est basé sur un objet sous-jacent - + The width of this wall. Not used if this wall is based on a face La largeur de ce mur. Pas utilisé si ce mur est basé sur une surface - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La hauteur de ce mur. Laisser à 0 pour automatique. Inutilisé si ce mur est basé sur un solide - + The alignment of this wall on its base object, if applicable L’alignement de ce mur sur son objet de base, le cas échéant - + The face number of the base object used to build this wall Le numéro de la surface de l’objet de base utilisé pour construire ce mur - + The offset between this wall and its baseline (only for left and right alignments) Le décalage entre ce mur et sa ligne de référence (uniquement pour les alignements à gauche et à droite) @@ -1054,7 +1054,7 @@ Le chevauchement des poutres au-dessus du bas des semelles - + The number of the wire that defines the hole. A value of 0 means automatic Le numéro du fil qui définit le trou. Une valeur de 0 signifie automatique @@ -1074,7 +1074,7 @@ Une transformation à appliquer à chaque étiquette - + The axes this system is made of Les axes sur lesquels ce système est constitué @@ -1204,7 +1204,7 @@ Taille de police - + The placement of this axis system La mise en place de ce système d'axe @@ -1224,57 +1224,57 @@ La largeur de la ligne des objets - + An optional unit to express levels Une unité optionnelle pour indiquer les niveaux - + A transformation to apply to the level mark Une transformation à appliquer aux marques des niveaux - + If true, show the level Si vrai, affiche le niveau - + If true, show the unit on the level tag Si vrai, affiche les unités dans l'étiquette de niveau - + If true, when activated, the working plane will automatically adapt to this level Si vrai et quand il sera activé, le plan de travail s'adaptera à ce niveau - + The font to be used for texts La police à utiliser pour les textes - + The font size of texts La taille de police des textes - + Camera position data associated with this object Données de position de caméra associées à cet objet - + If set, the view stored in this object will be restored on double-click Si activé, la vue enregistrée dans cet objet sera restaurée par un double-clic - + The individual face colors Les couleurs du face individuel - + If set to True, the working plane will be kept on Auto mode Si défini comme Vrai, le plan de travail sera maintenu en mode Automatique @@ -1419,42 +1419,42 @@ La direction du vol après l’atterrissage - + Enable this to make the wall generate blocks Cocher ceci pour rendre le mur à générer les blocs - + The length of each block La longueur de chaque bloc - + The height of each block La hauteur de chaque bloc - + The horizontal offset of the first line of blocks Le décalage horizontal de la première ligne de blocs - + The horizontal offset of the second line of blocks Le décalage horizontal de la deuxième ligne de blocs - + The size of the joints between each block La taille des joints entre chaque bloc - + The number of entire blocks Le nombre de blocs entiers - + The number of broken blocks Le nombre de blocs cassés @@ -1604,27 +1604,27 @@ L’épaisseur des contre-marches - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Si vrai, afficher les objets contenus dans cette Pièce de Construction adopteront ces paramètres de ligne, de couleur et de transparence - + The line width of child objects Largeur de ligne des objets enfants - + The line color of child objects Couleur de la ligne des objets enfants - + The shape color of child objects Couleur de forme des objets enfants - + The transparency of child objects Transparence des objets enfants @@ -1644,37 +1644,37 @@ Cette propriété stocke une représentation d'Inventor pour cet objet - + If true, display offset will affect the origin mark too Si vrai, le décalage d'affichage affectera également la marque d'origine - + If true, the object's label is displayed Si vrai, l'étiquette de l'objet est affichée - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Si cette option est activée, la représentation Inventor de cet objet sera enregistrée dans le fichier FreeCAD, permettant de le référencer dans un autre fichier en mode alléger. - + A slot to save the inventor representation of this object, if enabled Un emplacement pour sauvegarder la représentation Inventor de cet objet, si activé - + Cut the view above this level Couper la vue au-dessus de ce niveau - + The distance between the level plane and the cut line La distance entre le plan de niveau et la ligne de coupe - + Turn cutting on when activating this level Activez le section quand activer ce niveau @@ -1869,22 +1869,22 @@ Comment dessiner les barres - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Cela écrasera la valeur actuelle de la largeur pour définir la largeur de chaque segment du mur. La commande sera ignorée si la largeur de l'objet de base a été paramétrée avec la méthode getWidths(). (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Ceci remplace l'attribut Align pour définir Align de chaque segment de mur. Ignoré si l'objet Base fournit l'information du Align, avec la méthode getAligns(). (La 1ère valeur remplace l'attribut 'Align' pour le 1er segment de mur; si une valeur n'est pas 'Left, Right, Center', 1ère valeur de 'OverrideAlign' sera suivie) - + The area of this wall as a simple Height * Length calculation Surface du mur avec un simple calcul Hauteur * Longueur - + If True, double-clicking this object in the tree activates it Si Vrai, double-cliquer sur cet objet dans l'arborescence le rend actif @@ -2047,7 +2047,7 @@ Arch - + Components Composants @@ -2057,7 +2057,7 @@ Composants de cet objet - + Axes Axes @@ -2067,27 +2067,27 @@ Création d'un système d'axes - + Remove Enlever - + Add Ajouter - + Axis Axe - + Distance Distance - + Angle Angle @@ -2197,7 +2197,7 @@ Création d'une structure - + Create Wall Création d'un mur @@ -2222,42 +2222,42 @@ Création d'une fenêtre - + Edit Éditer - + Create/update component Créer ou mettre le composant à jour - + Base 2D object Objet 2D de base - + Wires Filaires - + Create new component Créer un nouveau composant - + Name Nom - + Type Type - + Thickness Épaisseur @@ -2332,22 +2332,22 @@ Forme incalculable - + Merge Wall Fusionner le mur - + Please select only wall objects Veuillez sélectionner uniquement des objets Murs - + Merge Walls Fusionner des murs - + Distances (mm) and angles (deg) between axes Distances (mm) et angles (degrés) entre les axes @@ -2799,22 +2799,22 @@ Porte - + Hinge Charnière - + Opening mode Mode d’ouverture - + Get selected edge Obtenir l’arête sélectionnée - + Press to retrieve the selected edge Appuyez sur pour récupérer l’arête sélectionnée @@ -2844,17 +2844,17 @@ Nouveau calque - + Wall Presets... Préréglages de mur... - + Hole wire Fil de trou - + Pick selected Choix sélectionné @@ -2869,67 +2869,67 @@ Créer une grille - + Label Étiquette - + Axis system components Composants du système d’axes - + Grid Grille - + Total width Largeur totale - + Total height Hauteur totale - + Add row Ajout de ligne - + Del row Effacer ligne - + Add col Ajouter col - + Del col Effacer col - + Create span Créer un Espace - + Remove span Supprimer l'espace - + Rows Lignes - + Columns Colonnes @@ -2944,12 +2944,12 @@ Limites de l’espace - + Error: Unable to modify the base object of this wall Erreur : Impossible de modifier l’objet base de ce mur - + Window elements Éléments de la fenêtre @@ -3014,22 +3014,22 @@ Veuillez sélectionner au moins un axe - + Auto height is larger than height La hauteur automatique est plus grand que la hauteur - + Total row size is larger than height Taille totale de la ligne est plus grande que la hauteur - + Auto width is larger than width Largeur automatique est plus grande que la largeur - + Total column size is larger than width La taille totale de la colonne est plus grande que la largeur @@ -3244,7 +3244,7 @@ Redimensionner - + Center Centre @@ -3279,12 +3279,12 @@ Intersection trouvée. - + The selected wall contains no subwall to merge Le mur sélectionné ne contient pas de sous-mur à fusionner - + Cannot compute blocks for wall Ne peut pas calculer les blocs pour mur @@ -3294,27 +3294,27 @@ Choisissez une face sur un objet existant, ou sélectionnez un paramètre prédéfini - + Unable to create component Impossible de créer le composant - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Le numéro du fil qui définit un trou dans l’objet hôte. Une valeur de zéro adoptera automatiquement le fil plus gros - + + default + défaut - + If this is checked, the default Frame value of this window will be added to the value entered here Si cette case est cochée, la valeur par défaut du cadre de cette fenêtre s’ajoutera à la valeur entrée ici - + If this is checked, the default Offset value of this window will be added to the value entered here Si cette case est cochée, la valeur par défaut du décalage de cette fenêtre s’ajoutera à la valeur entrée ici @@ -3469,37 +3469,37 @@ Pour&suivre - + First point of wall Premier point du mur - + Wall options Options du mur - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Cette liste montre tous les objets multi-matériaux de ce document. Créez-en quelques-uns pour définir les types de murs. - + Alignment Alignement - + Left Gauche - + Right Droit - + Use sketches Utiliser des croquis @@ -3679,17 +3679,17 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Mur - + This window has no defined opening Cette fenêtre n'a pas d'ouverture définie - + Invert opening direction Inverser la direction d'ouverture - + Invert hinge position Inverser la position de la charnière @@ -3935,7 +3935,7 @@ Création d'étage abandonnée. Arch_AxisTools - + Axis tools Outils pour les axes @@ -4109,62 +4109,62 @@ Création d'étage abandonnée. Arch_Grid - + The number of rows Le nombre de lignes - + The number of columns Le nombre de colonnes - + The sizes for rows Les tailles pour les lignes - + The sizes of columns Les tailles des colonnes - + The span ranges of cells that are merged together L' espace des rangées de cellules qui sont fusionnées - + The type of 3D points produced by this grid object Le type de points 3D, produit par cet objet grille - + The total width of this grid La largeur totale de cette grille - + The total height of this grid La hauteur totale de cette grille - + Creates automatic column divisions (set to 0 to disable) Crée des divisions de colonne automatique (définie sur 0 pour désactiver) - + Creates automatic row divisions (set to 0 to disable) Crée des divisions de ligne automatique (définie sur 0 pour désactiver) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Quand en mode de point médian d'arête si cette grille doit réorienter ses enfants le long de perpendiculaires à l'arête ou pas - + The indices of faces to hide Les indices de face à cacher @@ -4206,12 +4206,12 @@ Création d'étage abandonnée. Arch_MergeWalls - + Merge Walls Fusionner des murs - + Merges the selected walls, if possible Fusionne les murs sélectionnés, si possible @@ -4586,12 +4586,12 @@ Création d'étage abandonnée. Arch_Wall - + Wall Mur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crée un objet mur partir de zéro ou d'un objet sélectionné (une ligne, une face ou un solide) @@ -4911,7 +4911,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Écrire la position de la caméra diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index e43f816d08..a382b61d5c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -949,32 +949,32 @@ Se é verdadeiro, os elementos son aliñados cos eixos - + The length of this wall. Not used if this wall is based on an underlying object A lonxitude desta parede. Non se emprega se esta parede está baseada sobre un obxecto subxacente - + The width of this wall. Not used if this wall is based on a face A largura desta parede. Non se emprega se esta parede está baseada nunha cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid A altura desta parede. Manteña 0 para automática. Non usada se esta parede está baseada nun sólido - + The alignment of this wall on its base object, if applicable O aliñamento desta parede no seu obxecto de base, se é aplicábel - + The face number of the base object used to build this wall Número de caras do obxecto base usado para construír esta parede - + The offset between this wall and its baseline (only for left and right alignments) A separación entre esta parede e a súa liña de base (só para aliñacións esquerda e dereita) @@ -1054,7 +1054,7 @@ Remonte das banceiras na parte inferior dos chanzos - + The number of the wire that defines the hole. A value of 0 means automatic O número de arames que define o burato. Un valor de 0 significa automático @@ -1074,7 +1074,7 @@ Unha transformación para aplicar a cada etiqueta - + The axes this system is made of Eixos de que esta feito este sistema @@ -1204,7 +1204,7 @@ Tamaño da fonte - + The placement of this axis system Situación do sistema de eixos @@ -1224,57 +1224,57 @@ Largura da lixa desde obxecto - + An optional unit to express levels Unha unidade opcional para expresar niveis - + A transformation to apply to the level mark Unha transformación a aplicar á marca de nivel - + If true, show the level Sendo verdadeiro, amosa o nivel - + If true, show the unit on the level tag Se é certo, amosa a unidade na etiqueta de nivel - + If true, when activated, the working plane will automatically adapt to this level Se é certo, cando estea activado, o plano de traballo adaptarase automaticamente a este nivel - + The font to be used for texts Fonte a usar nos textos - + The font size of texts Tamaño da fonte nos textos - + Camera position data associated with this object Datos de posición da cámara asociados con este obxecto - + If set, the view stored in this object will be restored on double-click Activado, a vista almacenada neste obxecto restáurase ao facer dobre clic - + The individual face colors Cores para faces individuais - + If set to True, the working plane will be kept on Auto mode Definido como certo, o plano de traballo será mantido en modo automático @@ -1419,42 +1419,42 @@ A dirección dun treito de escaleira despois do relanzo - + Enable this to make the wall generate blocks Habilitar isto para facer bloques de parede xerados - + The length of each block A lonxitude de cada bloque - + The height of each block O alto de cada bloque - + The horizontal offset of the first line of blocks Desprazamento horizontal da primeira liña de bloques - + The horizontal offset of the second line of blocks Desprazamento horizontal da segunda liña de bloques - + The size of the joints between each block Tamaño das unións entre cada bloque - + The number of entire blocks O número de bloques enteiros - + The number of broken blocks O número de bloques rompidos @@ -1604,27 +1604,27 @@ Grosor do desnivel - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Se é verdadeiro, amosa obxectos contidos no Part Building que adoptarán esa liña, cor e axustes de transparencia - + The line width of child objects Largura da liña de obxectos fillos - + The line color of child objects A cor da liña de obxectos fillos - + The shape color of child objects A cor da forma de obxectos fillos - + The transparency of child objects A transparencia de obxectos fillos @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Compoñentes @@ -2057,7 +2057,7 @@ Compoñentes deste obxecto - + Axes Eixos @@ -2067,27 +2067,27 @@ Crear eixo - + Remove Rexeitar - + Add Engadir - + Axis Eixo - + Distance Distance - + Angle Ángulo @@ -2197,7 +2197,7 @@ Crear estrutura - + Create Wall Crear parede @@ -2222,42 +2222,42 @@ Crear a fiestra - + Edit Editar - + Create/update component Crear/actualizar compoñente - + Base 2D object Obxecto base 2D - + Wires Arames - + Create new component Crear novo compoñente - + Name Nome - + Type Tipo - + Thickness Grosor @@ -2332,22 +2332,22 @@ Non foi posíbel calcular unha forma - + Merge Wall Unir parede - + Please select only wall objects Por favor, escolla só obxectos parede - + Merge Walls Unir Paredes - + Distances (mm) and angles (deg) between axes Distancias (mm) e ángulos (graos) entre eixos @@ -2799,22 +2799,22 @@ Porta - + Hinge Gonzo - + Opening mode Xeito de apertura - + Get selected edge Coller bordo escolmado - + Press to retrieve the selected edge Prema para recuperar o bordo escolmado @@ -2844,17 +2844,17 @@ Nova capa - + Wall Presets... Definicións de muros... - + Hole wire Burato - + Pick selected Elixir o escolmado @@ -2869,67 +2869,67 @@ Crear Grella - + Label Etiqueta - + Axis system components Compoñentes do sistema de eixos - + Grid Grella - + Total width Largura total - + Total height Altura total - + Add row Engadir ringleira - + Del row Borrar ringleira - + Add col Engadir columna - + Del col Borrar columna - + Create span Crear van - + Remove span Quitar van - + Rows Ringleiras - + Columns Columnas @@ -2944,12 +2944,12 @@ Fronteiras de espazo - + Error: Unable to modify the base object of this wall Erro: Non se pode modificar o obxecto base desta parede - + Window elements Elementos da fiestra @@ -3014,22 +3014,22 @@ Por favor escolma polo menos un eixo - + Auto height is larger than height A altura automática é maior que o alto - + Total row size is larger than height O tamaño total da fila é maior que a altura - + Auto width is larger than width A largura automática é maior que a largura - + Total column size is larger than width O tamaño total das columnas é maior que a largura @@ -3244,7 +3244,7 @@ Redimensionar - + Center Centro @@ -3279,12 +3279,12 @@ Intersección atopada. - + The selected wall contains no subwall to merge A parede escolmada non contén ningunha sub-parede para fundir - + Cannot compute blocks for wall Non se pode calcular os bloques para a parede @@ -3294,27 +3294,27 @@ Escolme unha face nun obxecto existente ou escolme un pre-definido - + Unable to create component Non é posíbel crear o compoñente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número de arame que define un burato no obxecto hóspede. Un valor de cero adoptará automáticamente o arame máis grande - + + default + por defecto - + If this is checked, the default Frame value of this window will be added to the value entered here Se se marca, a Estrutura predeterminada desta fiestra engadírase ao valor ingresado aquí - + If this is checked, the default Offset value of this window will be added to the value entered here Se se marca esta opción, o valor predeterminado de desprazamento desta fiestra engadírase ao valor ingresado aquí @@ -3469,37 +3469,37 @@ &Seguir - + First point of wall Primeiro punto da parede - + Wall options Opcións da parede - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Esta lista amosa tódolos obxectos MultiMateriais deste documento. Crea un novo para definir tipos de paredes. - + Alignment Aliñamento - + Left Esquerda - + Right Dereita - + Use sketches Usar esbozos @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Parede - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Ferramentas de eixos @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Número de ringleiras - + The number of columns Número de columnas - + The sizes for rows Tamaños das filas - + The sizes of columns Tamaños das columnas - + The span ranges of cells that are merged together Rangos de extensión das celas que se fusionan - + The type of 3D points produced by this grid object Tipo de puntos 3D producidos por este obxecto grella - + The total width of this grid Largura total desta grella - + The total height of this grid Altura total desta grella - + Creates automatic column divisions (set to 0 to disable) Crea divisións automáticas na columna (poñer 0 para desactivar) - + Creates automatic row divisions (set to 0 to disable) Crea divisións de ringleira automáticas (poñer a 0 para desactivar) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Cando no modo punto medio da aresta, se esta grella debe reorientar aos seus fillos ao longo das normais ó bordo ou non - + The indices of faces to hide Índices das caras a agochar @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Unir Paredes - + Merges the selected walls, if possible Une as paredes escolmadas, se é posible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Parede - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un obxecto Parede desde cero ou a partir dun obxecto escolmado (esbozo, arame, cara ou sólido) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Escribir posición da cámara diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 415cb79fb2..dc5b05b098 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -949,32 +949,32 @@ Ako je "true", element je poravnat sa osi - + The length of this wall. Not used if this wall is based on an underlying object Dužina ovog zida. Ne koristiti ako se zid temelji na podlozi objekta - + The width of this wall. Not used if this wall is based on a face Širina zida. Ne koristiti ako se zid temelji na licu - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Visina ovog zida. Držite 0 za automatsko. Ne koristiti ako se zid temelji na krutom tijelu - + The alignment of this wall on its base object, if applicable Poravnavanje ovih zidova na njihov osnovni pravac, ako je primjenljivo - + The face number of the base object used to build this wall Broj naličja osnovnog objekta korišten za izgradnju zida - + The offset between this wall and its baseline (only for left and right alignments) Odmak ozmeđu zida i osnovne linije (samo za lijevo i desno poravnanje) @@ -1054,7 +1054,7 @@ Preklapanje reda poveza iznad dna profila - + The number of the wire that defines the hole. A value of 0 means automatic Broj profila koji definiraju otvore. Vrijednost 0 je podrazumijevana @@ -1074,7 +1074,7 @@ Transformacije primijeniti na svaku oznaku - + The axes this system is made of Ovaj sistem se sastoji od osi @@ -1204,7 +1204,7 @@ Veličina fonta - + The placement of this axis system Postavljanje sustava Osi @@ -1224,57 +1224,57 @@ Debljina linije ovog objekta - + An optional unit to express levels Jedna opcionalna jedinica za izraz Nivoa - + A transformation to apply to the level mark Transformacija koja se primjenjuje na oznaku nivoa - + If true, show the level Ako je to istina, Pokaži razinu - + If true, show the unit on the level tag Ako je to istina, pokaži jedinice na razini oznake - + If true, when activated, the working plane will automatically adapt to this level Ako je istina, kada se aktivira, radna ravnina automatski će se prilagoditi na ovu razinu - + The font to be used for texts Font za tekstove - + The font size of texts Veličina fonta tekstova - + Camera position data associated with this object Podaci položaja kamere vezani uz ovaj objekt - + If set, the view stored in this object will be restored on double-click Ako je postavljeno, pogled spremljen u taj objekt bit će vraćen sa dvoklikom - + The individual face colors Individualne boje lica - + If set to True, the working plane will be kept on Auto mode Ako postavljeno na istinit, radna ravnina će biti zadržana u automatskom načinu rada @@ -1419,42 +1419,42 @@ Smjer stubišta nakon među-etaže - + Enable this to make the wall generate blocks Omogućiti ovo da se od zida generiraju blokovi - + The length of each block Dužina svakog bloka - + The height of each block Visina svakog bloka - + The horizontal offset of the first line of blocks Horizontalni pomak prvog reda blokova - + The horizontal offset of the second line of blocks Horizontalni pomak drugog reda blokova - + The size of the joints between each block Veličina pukotina između svakog bloka - + The number of entire blocks Konačni broj blokova - + The number of broken blocks Broj šatiranih blokova @@ -1604,27 +1604,27 @@ Debljina od uspona - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Ako je istina, prikazani objekti iz ovog građevinskog dijela usvajaju ove postavke linije, boje i prozirnosti - + The line width of child objects Debljina linije objekata potomaka - + The line color of child objects Boja linije objekata potomaka - + The shape color of child objects Boja oblika objekata potomaka - + The transparency of child objects Prozirnost objekata potomaka @@ -1644,37 +1644,37 @@ Ova osobina pohranjuje reprezentaciju izumitelja za ovaj objekt - + If true, display offset will affect the origin mark too Ako je istina, pomak prikaza će utjecati i na oznaku podrijetla - + If true, the object's label is displayed Ako je točno, prikazuje se oznaka objekta - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Ako je ovo omogućeno, izumiteljski prikaz ovog objekta bit će spremljen u datoteci FreeCAD, omogućujući da se u jednostavnom načinu referencira na druge datoteke. - + A slot to save the inventor representation of this object, if enabled Ako je omogućen, prazno mjesto za spremanje objekta izumiteljskog reprezentacijskog prikaza - + Cut the view above this level Izrežite pogled iznad ove razine - + The distance between the level plane and the cut line Udaljenost između ravnine nivoa i linije reza - + Turn cutting on when activating this level Uključite rezanje kad aktivirate ovu razinu @@ -1871,25 +1871,25 @@ Kako crtati šipke - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Ovo nadjačava atribut Širina kako bi se postavila širina svakog segmenta zida. Zanemareno je ako Osnovni objekt pruža informacije o širini, pomoću metode getWidths (). (1. vrijednost nadjačava atribut 'Širina' za 1. segment zida; ako je vrijednost nula, slijedi se prva vrijednost 'OverrideWidth') - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Ovo nadjačava atribut Poravnaj za postavljanje poravnanja svakog segmenta zida. Zanemareno ako Osnovni objekt pruža informacije o poravnavanju, pomoću metode getAligns (). (1. vrijednost nadjačava atribut 'Poravnaj' za 1. segment zida; ako vrijednost nije 'Lijevo, Desno, Središte', slijedi se prva vrijednost 'OverrideAlign') - + The area of this wall as a simple Height * Length calculation Područje ovog zida kao jednostavan izračun Visina * Duljina - + If True, double-clicking this object in the tree activates it Ako je točno, dvostrukim klikom na ovaj objekt u stablu aktivira se @@ -2080,7 +2080,7 @@ Arch - + Components Komponente @@ -2090,7 +2090,7 @@ Komponente ovog objekta - + Axes Osi @@ -2100,27 +2100,27 @@ Stvaranje osi - + Remove Ukloniti - + Add Dodaj - + Axis Osi - + Distance Udaljenost - + Angle Kut @@ -2230,7 +2230,7 @@ Izgradi Strukturu - + Create Wall Izgradi zid @@ -2255,42 +2255,42 @@ Napravi prozor - + Edit Uredi - + Create/update component Napravi/osvježi komponentu - + Base 2D object Temeljni 2D objekt - + Wires Žice - + Create new component Izradi novu komponentu - + Name Ime - + Type Tip - + Thickness Debljina @@ -2365,22 +2365,22 @@ Oblik se nije mogao izračunati - + Merge Wall Spajanje zida - + Please select only wall objects Odaberite samo objekte zidova - + Merge Walls Spajanje zidova - + Distances (mm) and angles (deg) between axes Udaljenosti (mm) i kut (stupnjeva) između osi @@ -2832,22 +2832,22 @@ Vrata - + Hinge Šarka - + Opening mode Način otvaranja - + Get selected edge Zadrži odabrani rub - + Press to retrieve the selected edge Pritisnite da biste dohvatili odabrani rub @@ -2877,17 +2877,17 @@ Novi sloj - + Wall Presets... Zid predlošci... - + Hole wire Šuplja žica - + Pick selected Pokupi odabrano @@ -2902,67 +2902,67 @@ Stvaranje rešetke - + Label Oznaka - + Axis system components Komponente sustava Osi - + Grid Rešetka - + Total width Ukupna širina - + Total height Ukupna visina - + Add row Dodaj red - + Del row Ukloni red - + Add col Dodaj red - + Del col Ukloni red - + Create span Stvori prostor - + Remove span Ukloni prostor - + Rows Redovi - + Columns Stupci @@ -2977,12 +2977,12 @@ Granice prostora - + Error: Unable to modify the base object of this wall Pogreška: Nije moguće izmijeniti osnovni objekt ovog zida - + Window elements Elementi prozora @@ -3047,22 +3047,22 @@ Molimo odaberite najmanje jednu os - + Auto height is larger than height Automatska visina je veća od visine - + Total row size is larger than height Ukupna veličina redka je veča od visine - + Auto width is larger than width Auto širina je veća od širine - + Total column size is larger than width Ukupna veličina stupca je veča od širine @@ -3277,7 +3277,7 @@ Promjena veličine - + Center Središte @@ -3312,12 +3312,12 @@ Sjecište našao. - + The selected wall contains no subwall to merge Odabrani zid sadrži pomoćni za spajanje - + Cannot compute blocks for wall Ne može izračunati blokove za zid @@ -3327,27 +3327,27 @@ Odaberite lice na postojećem objektu ili odaberite predložak - + Unable to create component Nije moguće stvoriti komponentu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Broj žice ruba koji definira rupu u glavnom objektu. Vrijednost nula će automatski prihvatiti najdužu žicu ruba - + + default + zadano - + If this is checked, the default Frame value of this window will be added to the value entered here Ako je to označeno, zadana vrijednost nosača prozora će biti dodana vrijednosti upisanoj ovdje - + If this is checked, the default Offset value of this window will be added to the value entered here Ako je to označeno, zadana vrijednost pomaka prozora će biti dodana vrijednosti upisanoj ovdje @@ -3502,37 +3502,37 @@ Nastavi - + First point of wall Prva točka zida - + Wall options Opcije zida - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Ova lista prikazuje sve višeslojne objekte ovoga dokumenta. Stvorite ovakve za definiranje tipova zidova. - + Alignment Poravnanje - + Left Lijevo - + Right Desno - + Use sketches Koristite skice @@ -3720,21 +3720,21 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Zid - + This window has no defined opening Ovaj prozor nema definiran otvor - + Invert opening direction Obrnuti smjer otvaranja - + Invert hinge position Preokrenite položaj šarke @@ -3990,7 +3990,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Alati Osi @@ -4164,62 +4164,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Broj redova - + The number of columns Broj stupaca - + The sizes for rows Veličine redova - + The sizes of columns Veličine stupaca - + The span ranges of cells that are merged together Raspon ćelija koje će biti zajedno spojene - + The type of 3D points produced by this grid object Tip 3D točaka stvorenih sa ovim objektom rešetke - + The total width of this grid Krajnja širina rešetke - + The total height of this grid Krajnja visina rešetke - + Creates automatic column divisions (set to 0 to disable) Stvara automatsku podjelu stupca (postavite na 0 za onemogućiti) - + Creates automatic row divisions (set to 0 to disable) Stvara automatsku podjelu redova (postavite na 0 za onemogućiti) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Ako ste u modu središnje točke ruba, da li ova mreža mora preorijentirati svoje potomke uzduž normale ruba ili ne - + The indices of faces to hide Indeksi naličja za sakrivanje @@ -4261,12 +4261,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Spajanje zidova - + Merges the selected walls, if possible Spoji odabrane zidove ako je moguće @@ -4641,12 +4641,12 @@ Floor creation aborted. Arch_Wall - + Wall Zid - + Creates a wall object from scratch or from a selected object (wire, face or solid) Stvara zid objekt od nule ili od odabranog objekta (žice, površine ili tijela) @@ -4975,7 +4975,7 @@ Ostavite prazno da biste koristili sve predmete iz dokumenta Draft - + Writing camera position Zapiši položaj kamere diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 11e98b1c1b..adf8e24873 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -949,32 +949,32 @@ Ha igaz, akkor az elem tengelyekkel igazodik - + The length of this wall. Not used if this wall is based on an underlying object Ez a fal hossza. Nem használható, ha ennek a falnak alapjául más aláhúzott objektum szolgál - + The width of this wall. Not used if this wall is based on a face Ez a fal szélessége. Nem használható, ha ennek a falnak alapjául más felület szolgál - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Ennek a falnak a magassága. Automatikushoz legyen 0. Nem használt, amennyiben ez a fal szilárd testen áll - + The alignment of this wall on its base object, if applicable Ennek a falnak az alap objektumhoz való igazítása, ha lehetséges - + The face number of the base object used to build this wall Ennek a falnak a felépítéséhez használt alap objektumok száma - + The offset between this wall and its baseline (only for left and right alignments) Ennek a falnak és a kiindulási pontja (csak a bal és jobb nyomvonalak) közötti eltolás @@ -1054,7 +1054,7 @@ Az átfedés a futófelület aljától a tartógerendák tetejéig - + The number of the wire that defines the hole. A value of 0 means automatic A lyukakat meghatározó dróthálók száma. A 0 érték azt jelenti, hogy automatikus @@ -1074,7 +1074,7 @@ Egy átalakítás mely az összes címkére vonatkozik - + The axes this system is made of Tengelyek melyekre a rendszer épült @@ -1204,7 +1204,7 @@ A betűméret - + The placement of this axis system Ennek a tengely rendszernek az elhelyezése @@ -1224,57 +1224,57 @@ Ennek a tárgynak a vonalvastagsága - + An optional unit to express levels Egy választható mértékegység a szintek kifejezéséhez - + A transformation to apply to the level mark Egy átalakítás mely az összes szint jelölő címkére vonatkozik - + If true, show the level Ha igaz, akkor mutatja a szintet - + If true, show the unit on the level tag Ha az érték igaz, az egység megjelenítése a szint cimkén - + If true, when activated, the working plane will automatically adapt to this level Ha igaz, amikor aktivált, a munka sík automatikusan alkalmazkodik ehhez a szinthez - + The font to be used for texts A szöveghez használt betűtípus - + The font size of texts A szövegek betűmérete - + Camera position data associated with this object Az objektumhoz társított kamera pozíció adatok - + If set, the view stored in this object will be restored on double-click Ha meghatározott, az objektumhoz tárolt nézet visszaáll dupla kattintásra - + The individual face colors Az egyéni felület színek - + If set to True, the working plane will be kept on Auto mode Ha értéke True, a munka síkot auto módban tartja @@ -1419,42 +1419,42 @@ Lépcső járat iránya a pihenő után - + Enable this to make the wall generate blocks Engedélyezze ezt, hogy a fal hozza létre a blokkokat - + The length of each block Minden egyes blokk hossza - + The height of each block Minden egyes blokk magassága - + The horizontal offset of the first line of blocks Az első sor blokkok vízszintes eltolása - + The horizontal offset of the second line of blocks A második sor blokkjainak vízszintes eltolása - + The size of the joints between each block A blokkok közti fugák mérete - + The number of entire blocks Az összes blokkok száma - + The number of broken blocks A hibás blokkok száma @@ -1604,27 +1604,27 @@ Az emelkedés vastagsága - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Ha az érték igaz, akkor az ebben az Építőrészben lévő objektumok a beállított sor-, szín- és áttetszőségi értékeket fogják alkalmazni - + The line width of child objects Az al objektumok vonalvastagsága - + The line color of child objects Az al objektumok vonal színe - + The shape color of child objects Az al objektumok alakzat színe - + The transparency of child objects Az al objektumok átláthatósága @@ -1644,37 +1644,37 @@ Ez a tulajdonság az objektum feltaláló kilétét tárolja - + If true, display offset will affect the origin mark too Ha igaz, a megjelenítési eltolás az eredeti jelet is érinti - + If true, the object's label is displayed Ha igaz, az objektum címkéje megjelenik - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Ha ez engedélyezve van, az objektum feltaláló kiléte a FreeCAD fájlba kerül, lehetővé téve, hogy más fájlokban is hivatkozzon az egyszerű módban. - + A slot to save the inventor representation of this object, if enabled Egy tároló a tárgy feltalálójának kiléte mentéséhez, ha engedélyezve van - + Cut the view above this level Vágja le a nézetet ezen szint felett - + The distance between the level plane and the cut line A szintsík és a vágási vonal közötti távolság - + Turn cutting on when activating this level Ezen szint aktiválásakor a vágás bekapcsolása @@ -1869,22 +1869,22 @@ Hogyan rajzolja a rudakat - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Ez felülírja a Width attribútumot, hogy a fal minden egyes szakaszának szélességét beállítsa. Figyelmen kívül hagyva, ha az Alap objektum szélességi információt ad meg a getWidths() metódussal. (Az első érték felülbírálja a "Width" attribútumot a fal első szegmenséhez; ha az érték nulla, akkor az "OverrideWidth" első értéke következik) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Ez felülbírálja az Align attribútumot, hogy a fal minden egyes szegmensének Igazítását beállítsa. Figyelmen kívül hagyva, ha az alapobjektum Aligns információt ad meg a getAligns() metódussal. (Az első érték felülbírálja az "Align" attribútumot a fal első szegmenséhez; ha az érték nem "Balra, Jobbra, Középre", akkor a "OverrideAlign" első értéke a következő) - + The area of this wall as a simple Height * Length calculation A fal felülete, egyszerűen a Magasság*Hosszúság képlet szerint - + If True, double-clicking this object in the tree activates it Ha igaz, az objektumra duplán kattintva a fán aktiválja azt @@ -2047,7 +2047,7 @@ Arch - + Components Összetevők @@ -2057,7 +2057,7 @@ Az objektum elemei - + Axes Tengelyek @@ -2067,27 +2067,27 @@ Tengelyek létrehozása - + Remove Törlés - + Add Hozzáad - + Axis Tengely - + Distance Távolság - + Angle Szög @@ -2197,7 +2197,7 @@ Struktúra létrehozása - + Create Wall Fal létrehozása @@ -2222,42 +2222,42 @@ Ablak létrehozása - + Edit Szerkesztés - + Create/update component Létrehozni/frissíteni összetevőt - + Base 2D object Alap 2D objektumot - + Wires Drótvázak - + Create new component Új összetevő létrehozásához - + Name Név - + Type Típus - + Thickness Vastagság @@ -2332,22 +2332,22 @@ Nem tudott létrehozni alakzatot - + Merge Wall Fal egyesítése - + Please select only wall objects Kérem csak fal objektumokat válasszon ki - + Merge Walls Falak egyesítése - + Distances (mm) and angles (deg) between axes Tengelyek közti távolságok (mm) és szögek (fokban) @@ -2799,22 +2799,22 @@ Ajtó - + Hinge Zsanér - + Opening mode Nyitás módja - + Get selected edge Kiválasztott élt kapja - + Press to retrieve the selected edge Nyomja meg a kiválasztott él lekéréséhez @@ -2844,17 +2844,17 @@ Új réteg - + Wall Presets... Fal előre beállított értékei... - + Hole wire Drótháló lyuk - + Pick selected Véletlenszerűen kiválasztott @@ -2869,67 +2869,67 @@ Rács létrehozása - + Label Címke - + Axis system components Tengely rendszer komponensei - + Grid Rács - + Total width Teljes szélesség - + Total height Teljes magasság - + Add row Sor hozzáadás - + Del row Sor törlés - + Add col Oszlop hozzáadás - + Del col Oszlop törlés - + Create span Kiforgatás létrehozás - + Remove span Kiforgatás eltávolítás - + Rows Sorok - + Columns Oszlopok @@ -2944,12 +2944,12 @@ Terület határvonal - + Error: Unable to modify the base object of this wall Hiba: Nem lehet módosítani ennek a falnak az alap objektumát - + Window elements Ablak elemek @@ -3014,22 +3014,22 @@ Kérlek válassz legalább egy tengelyt - + Auto height is larger than height Automatikus magasság nagyobb, mint a magasság - + Total row size is larger than height Teljes sor mérete nagyobb, mint a magasság - + Auto width is larger than width Automatikus szélessége nagyobb, mint a szélesség - + Total column size is larger than width Teljes oszlop mérete nagyobb, mint a szélesség @@ -3244,7 +3244,7 @@ Átméretezés - + Center Középre @@ -3279,12 +3279,12 @@ Metszéspont található. - + The selected wall contains no subwall to merge A kijelölt fal nem tartalmaz összeegyeztethető fal részleteket - + Cannot compute blocks for wall Képtelen blokkokat számolni a falhoz @@ -3294,27 +3294,27 @@ Válasszon egy felületet a meglévő objektumon vagy válasszon egy előre beállítottat - + Unable to create component Nem sikerült létrehozni egy összetevőt - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire A hordozó objektumon lévő furat meghatározásához használt drótháló száma. A nulla értékkel automatikusan a legnagyobb dróthálót fogadja el - + + default + alapértelmezett - + If this is checked, the default Frame value of this window will be added to the value entered here Ha ez be van jelölve, az ablak keret alapérték hozzáadódik az itt megadott értékhez - + If this is checked, the default Offset value of this window will be added to the value entered here Ha ez be van jelölve, az ablak eltolás alapérték hozzáadódik az itt megadott értékhez @@ -3469,37 +3469,37 @@ Folytatás - + First point of wall Fal első pontja - + Wall options Fal lehetőségek - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. MultiMaterial elemek a dokumentumban. Fal típusok definiálásához. - + Alignment Igazítás - + Left Bal - + Right Jobb - + Use sketches Vázlatok használata @@ -3679,17 +3679,17 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Fal - + This window has no defined opening Ennek az ablakban nincs meghatározva a nyitása - + Invert opening direction Nyitásirány megfordítása - + Invert hinge position Zsanér pozíció megfordítása @@ -3945,7 +3945,7 @@ Szint létrehozása megszakítva. Arch_AxisTools - + Axis tools Tengely eszközök @@ -4119,62 +4119,62 @@ Szint létrehozása megszakítva. Arch_Grid - + The number of rows A sorok száma - + The number of columns Az oszlopok száma - + The sizes for rows Mértek a sorokhoz - + The sizes of columns Méretek az oszlopokhoz - + The span ranges of cells that are merged together Az összefőzött cellák kitöltési határai - + The type of 3D points produced by this grid object A rács tárgy által létrehozott 3D pontok típusa - + The total width of this grid Ennek a rácsnak a teljes szélessége - + The total height of this grid Ennek a rácsnak a teljes magassága - + Creates automatic column divisions (set to 0 to disable) Automatikus oszlop kiosztást hoz létre (állítsa 0-ra a kikapcsoláshoz) - + Creates automatic row divisions (set to 0 to disable) Automatikus sor kiosztást hoz létre (állítsa 0-ra a kikapcsoláshoz) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Az élfelezőpont módban, ha a rácsnak el kell fordítania az elágazásait az aktuális él mentén, vagy nem - + The indices of faces to hide A felületek jelöléseinek elrejtése @@ -4216,12 +4216,12 @@ Szint létrehozása megszakítva. Arch_MergeWalls - + Merge Walls Falak egyesítése - + Merges the selected walls, if possible Egyesíti a kijelölt falakat, ha lehetséges @@ -4596,12 +4596,12 @@ Szint létrehozása megszakítva. Arch_Wall - + Wall Fal - + Creates a wall object from scratch or from a selected object (wire, face or solid) Létrehoz egy falat objektumot vázlatból vagy egy kijelölt objektumból (vonal, felület vagy test) @@ -4925,7 +4925,7 @@ Hagyja üresen a dokumentum összes objektumának használatát Draft - + Writing camera position Kamera helyzet írása diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index f69592fcc7..2a54e2f597 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -949,32 +949,32 @@ Jika benar elemennya sejajar dengan sumbu - + The length of this wall. Not used if this wall is based on an underlying object Panjang dinding ini. Tidak digunakan jika dinding ini didasarkan pada objek yang mendasarinya - + The width of this wall. Not used if this wall is based on a face Lebar dinding ini. Tidak digunakan jika dinding ini didasarkan pada wajah - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Tinggi dinding ini. Simpan 0 untuk otomatis. Tidak digunakan jika dinding ini berdasarkan padatan - + The alignment of this wall on its base object, if applicable Penyelarasan dinding ini pada objek dasarnya, jika dapat diterapkan - + The face number of the base object used to build this wall Jumlah permukaan dari objek dasar yang digunakan untuk membangun dinding ini - + The offset between this wall and its baseline (only for left and right alignments) Nilai penutup selisih, antara dinding dan garis dasarnya (hanya untuk rata kiri dan kanan) @@ -1054,7 +1054,7 @@ Tumpang tindih stringer di atas bagian bawah tapak - + The number of the wire that defines the hole. A value of 0 means automatic Jumlah kabel yang mendefinisikan lubang. Nilai 0 berarti otomatis @@ -1074,7 +1074,7 @@ Transformasi berlaku untuk setiap label - + The axes this system is made of Sumbu sistem ini terbuat dari @@ -1204,7 +1204,7 @@ Ukuran font - + The placement of this axis system Penempatan sistem sumbu ini @@ -1224,57 +1224,57 @@ Tebal gari dari objek ini - + An optional unit to express levels Unit opsional untuk mengekspresikan level - + A transformation to apply to the level mark Menerapkan transformasi untuk setiap tanda level - + If true, show the level Jika benar, tampilkan levelnya - + If true, show the unit on the level tag Jika benar, tampilkan unit di label level - + If true, when activated, the working plane will automatically adapt to this level Jika benar, saat diaktifkan, bidang kerja akan otomatis menyesuaikan ke level ini - + The font to be used for texts Fon akan digunakan untuk teks - + The font size of texts Font untuk teks - + Camera position data associated with this object Data posisi kamera yang diasosiasikan ke objek ini - + If set, the view stored in this object will be restored on double-click Jika diatur, tampilan yang disimpan pada objek ini akan dipulihkan dengan dobel klik - + The individual face colors Warna muka individu - + If set to True, the working plane will be kept on Auto mode Jika diatur ke Benar, bidang kerja akan tetap dalam mode Auto @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block Panjang setiap blok - + The height of each block Tinggi setiap blok - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block Ukuran sambungan antara setiap blok - + The number of entire blocks Jumlah seluruh blok - + The number of broken blocks Jumlah blok rusak @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects Tebal garis dari objek turunan - + The line color of child objects Warna garis dari objek turunan - + The shape color of child objects Warna bentuk dari objek turunan - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Komponen @@ -2057,7 +2057,7 @@ Components of this object - + Axes Axes @@ -2067,27 +2067,27 @@ Create Axis - + Remove Menghapus - + Add Menambahkan - + Axis Axis - + Distance Distance - + Angle Sudut @@ -2197,7 +2197,7 @@ Buat struktur - + Create Wall Membuat Dinding @@ -2222,42 +2222,42 @@ Membuat Jendela - + Edit Edit - + Create/update component Membuat/pembaruan komponen - + Base 2D object Dasar objek 2D - + Wires Kabel - + Create new component Membuat komponen baru - + Name Nama - + Type Jenis - + Thickness Thickness @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Silahkan pilih hanya benda dinding - + Merge Walls Gabungkan Dinding - + Distances (mm) and angles (deg) between axes Jarak (mm) dan sudut (deg) antar sumbu @@ -2799,22 +2799,22 @@ Pintu - + Hinge Engsel - + Opening mode Mode pembuka - + Get selected edge Dapatkan tepi yang dipilih - + Press to retrieve the selected edge Tekan untuk mengambil tepi yang dipilih @@ -2844,17 +2844,17 @@ Layer baru - + Wall Presets... Preset Dinding ... - + Hole wire Kawat lubang - + Pick selected Pilih yang dipilih @@ -2869,67 +2869,67 @@ Buat Grid - + Label Label - + Axis system components Komponen sistem sumbu - + Grid Kisi - + Total width Lebar total - + Total height Tinggi total - + Add row Menambahkan baris - + Del row Del baris - + Add col Tambahkan col - + Del col Del col - + Create span Buat span - + Remove span Hapus span - + Rows Baris - + Columns Kolom @@ -2944,12 +2944,12 @@ Batas ruang - + Error: Unable to modify the base object of this wall Kesalahan: Tidak dapat memodifikasi objek dasar dinding ini - + Window elements Elemen jendela @@ -3014,22 +3014,22 @@ Silakan pilih setidaknya satu sumbu - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Pusat @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Kiri - + Right Kanan - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Dinding - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Alat sumbu @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Jumlah baris - + The number of columns Jumlah kolom - + The sizes for rows Ukuran untuk baris - + The sizes of columns Ukuran kolom - + The span ranges of cells that are merged together Rentang rentang sel yang digabungkan bersama - + The type of 3D points produced by this grid object Tipe titik 3D yang dihasilkan oleh objek grid ini - + The total width of this grid Lebar total grid ini - + The total height of this grid Tinggi total grid ini - + Creates automatic column divisions (set to 0 to disable) Membuat divisi kolom otomatis ( diatur ke 0 untuk menonaktifkan) - + Creates automatic row divisions (set to 0 to disable) Membuat divisi baris otomatis ( diatur ke 0 untuk menonaktifkan) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Saat dalam mode midpoint tepi, jika grid ini harus mengarahkan kembali anak-anaknya di sepanjang garis normal atau tidak - + The indices of faces to hide Indeks wajah untuk disembunyikan @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Gabungkan Dinding - + Merges the selected walls, if possible Gabungkan dinding yang dipilih, jika memungkinkan @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Dinding - + Creates a wall object from scratch or from a selected object (wire, face or solid) Membuat benda dinding dari nol atau dari objek yang dipilih ( kawat, wajah atau padat) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Menulis posisi kamera diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index a8799d43d4..d98ece1198 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -949,32 +949,32 @@ Se true gli elementi sono allineati con gli assi - + The length of this wall. Not used if this wall is based on an underlying object La lunghezza di questo muro. Non usata se questo muro è basato su un oggetto sottostante - + The width of this wall. Not used if this wall is based on a face La larghezza di questo muro. Non è usata se questo muro è basato su una faccia - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'altezza di questo muro. Lasciare 0 per automatico. Non usata se questo muro è basato su un solido - + The alignment of this wall on its base object, if applicable L'allineamento di questo muro sul suo oggetto di base, se applicabile - + The face number of the base object used to build this wall Il numero di faccia dell'oggetto base utilizzato per costruire questo muro - + The offset between this wall and its baseline (only for left and right alignments) L'offset tra questo muro e la sua linea guida (solo per gli allineamenti destro e sinistro) @@ -1054,7 +1054,7 @@ Il sormonto delle traverse sopra il sotto dei gradini - + The number of the wire that defines the hole. A value of 0 means automatic Il numero del profilo che definisce il foro. Il valore 0 indica automatico @@ -1074,7 +1074,7 @@ Una trasformazione da applicare a ogni etichetta - + The axes this system is made of Gli assi di che formano questo sistema @@ -1204,7 +1204,7 @@ La dimensione del carattere - + The placement of this axis system Il posizionamento di questo sistema di assi @@ -1224,57 +1224,57 @@ Lo spessore della linea di questo oggetto - + An optional unit to express levels Un'unità opzionale per esprimere i livelli - + A transformation to apply to the level mark Trasformazione da applicare al segno di livello - + If true, show the level Se true, visualizza il livello - + If true, show the unit on the level tag Se true, visualizza l'unità nell'etichetta del livello - + If true, when activated, the working plane will automatically adapt to this level Se true, quando attivato, il piano di lavoro si adatta automaticamente a questo livello - + The font to be used for texts Il tipo di carattere da utilizzare per i testi - + The font size of texts La dimensione del carattere dei testi - + Camera position data associated with this object Dati di posizione della fotocamera associati a questo oggetto - + If set, the view stored in this object will be restored on double-click Se abilitato, la vista salvata in questo oggetto viene ripristinata facendo doppio clic - + The individual face colors I colori delle singole facce - + If set to True, the working plane will be kept on Auto mode Se impostato su True, il piano di lavoro viene mantenuto in modalità Auto @@ -1419,42 +1419,42 @@ Direzione della scala dopo il pianerottolo - + Enable this to make the wall generate blocks Abilitare questo per far sì che il muro generi i blocchi - + The length of each block La lunghezza di ciascun blocco - + The height of each block L'altezza di ogni blocco - + The horizontal offset of the first line of blocks L'offset orizzontale della prima linea di blocchi - + The horizontal offset of the second line of blocks L'offset orizzontale della seconda linea di blocchi - + The size of the joints between each block Le dimensioni dei giunti tra ogni blocco - + The number of entire blocks Il numero di blocchi interi - + The number of broken blocks Il numero di blocchi tagliati @@ -1604,27 +1604,27 @@ Lo spessore delle alzate - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Se è vero, mostra gli oggetti contenuti in questa Parte di edificio adottando queste impostazioni di linea, colore e trasparenza - + The line width of child objects La larghezza della linea degli oggetti figlio - + The line color of child objects Colore della linea degli oggetti figlio - + The shape color of child objects Colore della forma degli oggetti figlio - + The transparency of child objects La trasparenza degli oggetti figli @@ -1644,37 +1644,37 @@ Questa proprietà memorizza una rappresentazione inventor per questo oggetto - + If true, display offset will affect the origin mark too Se è vero, quando attivato, l'offset della visualizzazione influisce anche sul segno di origine - + If true, the object's label is displayed Se vero, viene visualizzata l'etichetta dell'oggetto - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Se abilitato, la rappresentazione inventor di questo oggetto verrà salvata nel file FreeCAD, consentendo il riferimento ad esso in un altro file in modalità leggera. - + A slot to save the inventor representation of this object, if enabled Uno slot per salvare la rappresentazione inventor di questo oggetto, se abilitato - + Cut the view above this level Taglia la vista sopra questo livello - + The distance between the level plane and the cut line La distanza tra il piano del livello e la linea di taglio - + Turn cutting on when activating this level Attiva il taglio quando si attiva questo livello @@ -1869,22 +1869,22 @@ Come disegnare le aste - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Questo sovrascrive l'attributo Larghezza per impostare la larghezza di ciascun segmento di muro. Ignorato se l'oggetto base fornisce informazioni sulla larghezza, con il metodo getWidths (). (Il 1° valore sovrascive l'attributo 'Larghezza' per il 1° segmento del muro; se un valore è zero, verrà usato il 1° valore di 'OverrideWidth') - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Questo sovrascive l'attributo Allinea per impostare l'allineamento di ciascun segmento di muro. Ignorato se l'oggetto base fornisce informazioni sull'allineamento con il metodo getAligns (). (Il 1° valore sostituisce l'attributo "Allinea" per il 1° segmento del muro; se un valore non è "Sinistra, Destra, Centro", verrà usato il 1° valore di "OverrideAlign") - + The area of this wall as a simple Height * Length calculation L'area di questo muro come una semplice calcolo di lunghezza * altezza - + If True, double-clicking this object in the tree activates it Se è True, facendo doppio clic su questo oggetto nell'albero lo si rende attivo @@ -2047,7 +2047,7 @@ Arch - + Components Componenti @@ -2057,7 +2057,7 @@ Componenti di questo oggetto - + Axes Assi @@ -2067,27 +2067,27 @@ Crea Asse - + Remove Rimuovi - + Add Aggiungi - + Axis Asse - + Distance Distanza - + Angle Angolo @@ -2197,7 +2197,7 @@ Crea Struttura - + Create Wall Crea un muro @@ -2222,42 +2222,42 @@ Crea Finestra - + Edit Modifica - + Create/update component Crea o aggiorna componente - + Base 2D object Oggetto 2D di base - + Wires Polilinea - + Create new component Crea nuovo componente - + Name Nome - + Type Tipo - + Thickness Spessore @@ -2332,22 +2332,22 @@ Non è possibile computare una forma - + Merge Wall Unisci i muri - + Please select only wall objects Selezionare solo gli oggetti muro - + Merge Walls Unisci i muri - + Distances (mm) and angles (deg) between axes Distanze (mm) ed angoli (gradi) tra gli assi @@ -2799,22 +2799,22 @@ Porta - + Hinge Cerniera - + Opening mode Modalità di apertura - + Get selected edge Ottenere il bordo selezionato - + Press to retrieve the selected edge Premere per recuperare il bordo selezionato @@ -2844,17 +2844,17 @@ Nuovo strato - + Wall Presets... Muri predefiniti... - + Hole wire Contorno del foro - + Pick selected Usa selezionata @@ -2869,67 +2869,67 @@ Crea griglia - + Label Etichetta - + Axis system components Componenti del sistema di riferimento - + Grid Griglia - + Total width Larghezza totale - + Total height Altezza totale - + Add row Aggiungi riga - + Del row Cancella riga - + Add col Aggiungi colonna - + Del col Cancella colonna - + Create span Crea luce - + Remove span Rimuovi luce - + Rows Righe - + Columns Colonne @@ -2944,12 +2944,12 @@ Confini dello spazio - + Error: Unable to modify the base object of this wall Errore: impossibile modificare l'oggetto base di questo muro - + Window elements Elementi della finestra @@ -3014,22 +3014,22 @@ Selezionare almeno un asse - + Auto height is larger than height L'altezza automatica è maggiore dell'altezza - + Total row size is larger than height La misura totale delle righe è maggiore dell'altezza - + Auto width is larger than width La larghezza automatica è maggiore della larghezza - + Total column size is larger than width La dimensione totale della colonna è maggiore della larghezza @@ -3244,7 +3244,7 @@ Ridimensiona - + Center Centro @@ -3279,12 +3279,12 @@ Intersezione trovata. - + The selected wall contains no subwall to merge Il muro selezionato non contiene nessun sotto-muro da unire - + Cannot compute blocks for wall Non è possibile calcolare i blocchi per il muro @@ -3294,27 +3294,27 @@ Scegliere una faccia su un oggetto esistente o selezionare un preimpostato - + Unable to create component Impossibile creare il componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Il numero del contorno che definisce un foro nell'oggetto ospite. Il valore zero adotta automaticamente il contorno più grande - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here Se è selezionato, il valore Frame predefinito di questa finestra viene aggiunto al valore inserito qui - + If this is checked, the default Offset value of this window will be added to the value entered here Se è selezionato, il valore Offset predefinito di questa finestra viene aggiunto al valore inserito qui @@ -3469,37 +3469,37 @@ Con&tinua - + First point of wall Primo punto del muro - + Wall options Opzioni di Muro - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Questa lista mostra tutti gli oggetti MultiMateriale di questo documento. Creane alcuni per definire i tipi di muri. - + Alignment Allineamento - + Left A sinistra - + Right A destra - + Use sketches Utilizza gli schizzi @@ -3679,17 +3679,17 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Muro - + This window has no defined opening Questa finestra non ha alcuna apertura definita - + Invert opening direction Inverti direzione di apertura - + Invert hinge position Inverti posizione cerniera @@ -3945,7 +3945,7 @@ Creazione del Livello interrotta. Arch_AxisTools - + Axis tools Assi @@ -4119,62 +4119,62 @@ Creazione del Livello interrotta. Arch_Grid - + The number of rows Il numero di righe - + The number of columns Il numero di colonne - + The sizes for rows Dimensioni delle righe - + The sizes of columns Dimensioni delle colonne - + The span ranges of cells that are merged together Gli intervalli di celle unite per creare le luci - + The type of 3D points produced by this grid object Il tipo di punti 3D prodotto da questo oggetto griglia - + The total width of this grid La larghezza totale di questa griglia - + The total height of this grid L'altezza totale di questa griglia - + Creates automatic column divisions (set to 0 to disable) Divide automaticamente le colonne con la larghezza impostata quì (0 per disabilitare) - + Creates automatic row divisions (set to 0 to disable) Divide automaticamente le righe con la l'altezza impostata quì (0 per disabilitare) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Se questa griglia, quando è in modalità punto medio del bordo, deve riposizionare i suoi figli lungo le normali al bordo o no - + The indices of faces to hide Gli indici delle facce da nascondere @@ -4216,12 +4216,12 @@ Creazione del Livello interrotta. Arch_MergeWalls - + Merge Walls Unisci i muri - + Merges the selected walls, if possible Unisce i muri selezionati, se possibile @@ -4596,12 +4596,12 @@ Creazione del Livello interrotta. Arch_Wall - + Wall Muro - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un oggetto Muro da zero o da un oggetto selezionato (wire, faccia o solido) @@ -4925,7 +4925,7 @@ Lasciare vuoto per utilizzare tutti gli oggetti del documento Draft - + Writing camera position Scrivere la posizione della camera diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 6b6b07b1f0..be76f55571 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -949,32 +949,32 @@ Trueの場合、要素を軸方向に整列 - + The length of this wall. Not used if this wall is based on an underlying object 壁の長さ。壁が基礎となるオブジェクトに基づいている場合には使用されません。 - + The width of this wall. Not used if this wall is based on a face この壁の幅。この壁が面に基づく場合は使用されません。 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid この壁の高さ。自動設定する場合は0のままにしてください。この壁がソリッドに基づく場合は使用されません - + The alignment of this wall on its base object, if applicable 適用可能な場合、この壁のベースオブジェクトに対する位置 - + The face number of the base object used to build this wall この壁の作成に使用されているベースオブジェクトの面の数 - + The offset between this wall and its baseline (only for left and right alignments) この壁とそのベースラインとの間のオフセット(左揃え、右揃えの時のみ) @@ -1054,7 +1054,7 @@ 踏み板の底部上の側桁の重なり - + The number of the wire that defines the hole. A value of 0 means automatic 穴を定義するワイヤーの数。値0の場合は自動になります。 @@ -1074,7 +1074,7 @@ 各ラベルに適用する変換 - + The axes this system is made of このシステムを構成する軸 @@ -1204,7 +1204,7 @@ フォントサイズ - + The placement of this axis system 軸システムの配置 @@ -1224,57 +1224,57 @@ オブジェクトの線幅 - + An optional unit to express levels レベルを表すオプションの単位 - + A transformation to apply to the level mark レベルマークに適用する変換 - + If true, show the level Trueの場合、レベルを表示 - + If true, show the unit on the level tag Trueの場合、レベルタグ上に単位を表示 - + If true, when activated, the working plane will automatically adapt to this level ここをtureにした場合、アクティブになっているとき、作業平面が自動的にこちらのレベルに適合させられます - + The font to be used for texts テキストに使用するフォント - + The font size of texts テキストの文字サイズ - + Camera position data associated with this object このオブジェクトに関連しているカメラ位置のデータ - + If set, the view stored in this object will be restored on double-click 設定すると、このオブジェクトに保存されているビューがダブルクリックで復元できます。 - + The individual face colors 各面の色 - + If set to True, the working plane will be kept on Auto mode True に設定すると、作業平面が自動モードのままになります。 @@ -1419,42 +1419,42 @@ 踊り場から次の踊り場(階) へ登る方向 - + Enable this to make the wall generate blocks 壁によってブロックを生成させる場合は有効化 - + The length of each block 各ブロックの長さ - + The height of each block 各ブロックの高さ - + The horizontal offset of the first line of blocks ブロックの最初の線の水平オフセット - + The horizontal offset of the second line of blocks ブロックの2番目の線の水平オフセット - + The size of the joints between each block 各ブロック間のジョイントのサイズ - + The number of entire blocks 全体のブロック数 - + The number of broken blocks 壊れたブロックの数 @@ -1604,27 +1604,27 @@ 踏み板の厚み - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings ここがTureの場合に、このビルディング部品に含まれたオブジェクトが、線や色、透明度、何れかの設定で表示されます - + The line width of child objects 子オブジェクトの線幅 - + The line color of child objects 子オブジェクトの線の色 - + The shape color of child objects 子オブジェクトのシェイプの色 - + The transparency of child objects 子オブジェクトの透明度 @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too True にした場合、表示オフセットは原点マークにも影響します - + If true, the object's label is displayed ここをTureにした場合、オブジェクトのラベルが表示されます - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. ここが有効な場合、このオブジェクトのインベンター表現がFreeCADファイルに保存され、軽量モードで他のファイルを参照することができます。 - + A slot to save the inventor representation of this object, if enabled 有効な場合、このオブジェクトのインベンター表現を保存するためのスロット - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line 平面の水準と切断線の間の距離 - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ ロッドの描画方法 - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) これは Width 属性をオーバーライドして、壁の各セグメントの幅を設定します。Base オブジェクトの幅の情報がgetWidths() メソッドによって決定される場合は無視されます。 (1 番目の値は壁の 1 番目のセグメントの 'Width' 属性を上書きします。もし値が0（零） の場合、'OverrideWidth' の 1 番目の値に従います) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) これにより、壁の各セグメントのAlign 属性をAlign に設定します。 Base オブジェクトのアライメント情報をgetAligns() メソッドによって決定される場合は無視します。 (1 番目の値は壁の 1 番目のセグメントの 'Align' 属性を上書きします; 値が 'Left, Right, Center' でない場合、'OverrideAlign' の1番目の値に従います) - + The area of this wall as a simple Height * Length calculation この壁の面積 (area) は、単純に「高さ×長さ」の計算となります - + If True, double-clicking this object in the tree activates it ここを True にした場合、ツリー内でこのオブジェクトをダブルクリックするとアクティブになります @@ -2047,7 +2047,7 @@ Arch - + Components コンポーネント @@ -2057,7 +2057,7 @@ このオブジェクトのコンポーネント - + Axes 軸 @@ -2067,27 +2067,27 @@ 軸を作成 - + Remove 削除 - + Add 追加 - + Axis 軸 - + Distance 距離 - + Angle 角度 @@ -2197,7 +2197,7 @@ 構造体を作成 - + Create Wall 壁を作成 @@ -2222,42 +2222,42 @@ 窓を作成 - + Edit 編集 - + Create/update component コンポーネントを作成/更新する - + Base 2D object ベース2Dオブジェクト - + Wires ワイヤー - + Create new component 新しいコンポーネントを作成 - + Name 名前 - + Type タイプ - + Thickness 厚み @@ -2332,22 +2332,22 @@ シェイプを計算できません - + Merge Wall 壁を統合 - + Please select only wall objects 壁オブジェクトのみを選択してください - + Merge Walls 壁を統合 - + Distances (mm) and angles (deg) between axes 軸の間の距離 (mm) と角度 (度) @@ -2799,22 +2799,22 @@ ドア - + Hinge ヒンジ - + Opening mode オープニングモード - + Get selected edge 選択エッジを取得 - + Press to retrieve the selected edge 選択したエッジを取得するにはキーを押します @@ -2844,17 +2844,17 @@ 新規レイヤー - + Wall Presets... 壁のプリセット... - + Hole wire ホールワイヤー - + Pick selected ピック選択 @@ -2869,67 +2869,67 @@ グリッドを作成 - + Label ラベル - + Axis system components 軸システムの成分 - + Grid グリッド - + Total width 全体の幅 - + Total height 全体の高さ - + Add row 行を追加 - + Del row 行を削除 - + Add col 列を追加 - + Del col 列を削除 - + Create span スパンを作成 - + Remove span スパンを削除 - + Rows 行 - + Columns 列 @@ -2944,12 +2944,12 @@ スペース境界 - + Error: Unable to modify the base object of this wall エラー: この壁のベース オブジェクトを変更できません - + Window elements 窓要素 @@ -3014,22 +3014,22 @@ 少なくとも1つの軸を選択してください - + Auto height is larger than height 自動高さが高さよりも大きいです - + Total row size is larger than height 行の合計サイズが高さよりも大きいです - + Auto width is larger than width 自動設定幅が幅よりも大きいです - + Total column size is larger than width 列の合計サイズが幅よりも大きいです @@ -3244,7 +3244,7 @@ リサイズ - + Center 中心 @@ -3279,12 +3279,12 @@ 交差が見つかりました。 - + The selected wall contains no subwall to merge 選択した壁は統合できる下位の壁を含んでいません - + Cannot compute blocks for wall 壁用のブロックを計算できません。 @@ -3294,27 +3294,27 @@ 既存オブジェクトにある面を選択するか、プリセットを選択 - + Unable to create component コンポーネントを作成できません - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire ホストオブジェクトでの穴を定義するワイヤーの数。値0では自動的に最大のワイヤーとなります。 - + + default + デフォルト - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ 続行 (&T) - + First point of wall First point of wall - + Wall options 壁のオプション - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. このリストには、このドキュメントの多重オブジェクトの全てが表示されます。壁のタイプを定義するために作成します。 - + Alignment Alignment - + Left 左面図 - + Right 右面図 - + Use sketches スケッチを使用 @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 壁 - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools 軸ツール @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows 行数 - + The number of columns 列数 - + The sizes for rows 行サイズ - + The sizes of columns 列サイズ - + The span ranges of cells that are merged together 結合されたセルのスパンの範囲 - + The type of 3D points produced by this grid object このグリッドオブジェクトによって作成された3D点の種類 - + The total width of this grid このグリッドの全体の幅 - + The total height of this grid このグリッドの全体の高さ - + Creates automatic column divisions (set to 0 to disable) 自動列分割を作成（0に設定すると無効化） - + Creates automatic row divisions (set to 0 to disable) 自動行分割を作成（0に設定すると無効化） - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not エッジ中点モードの場合、このグリッドがその子をエッジ法線にそって方向転換するかどうか - + The indices of faces to hide 非表示にする面の番号 @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls 壁を統合 - + Merges the selected walls, if possible 可能な場合、選択した壁を結合 @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall 壁 - + Creates a wall object from scratch or from a selected object (wire, face or solid) スクラッチまたは選択されているオブジェクト（ワイヤー、面、ソリッド）から壁オブジェクトを作成します @@ -4921,7 +4921,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position カメラ位置を書き込み diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.ts b/src/Mod/Arch/Resources/translations/Arch_kab.ts index 949f9de47a..1f0ce75bf1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_kab.ts +++ b/src/Mod/Arch/Resources/translations/Arch_kab.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Isuddas @@ -2057,7 +2057,7 @@ Components of this object - + Axes Axes @@ -2067,27 +2067,27 @@ Create Axis - + Remove Kkes - + Add Rnu - + Axis Agellus - + Distance Ameccaq - + Angle Tiɣmeṛt @@ -2197,7 +2197,7 @@ Create Structure - + Create Wall Create Wall @@ -2222,42 +2222,42 @@ Create Window - + Edit Ẓreg - + Create/update component Create/update component - + Base 2D object Base 2D object - + Wires Wires - + Create new component Create new component - + Name Isem - + Type Anaw - + Thickness Tuzert @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Smezdi iɣraben - + Please select only wall objects Please select only wall objects - + Merge Walls Smezdi iɣraben - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2799,22 +2799,22 @@ Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Tamezzut - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Centre @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Gauche - + Right Droit - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Aɣrab - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Smezdi iɣraben - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Aɣrab - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.qm b/src/Mod/Arch/Resources/translations/Arch_ko.qm index 4d3231a073..91e333ea39 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ko.qm and b/src/Mod/Arch/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index 90d849e1f3..498f30a89c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -211,7 +211,7 @@ The line width of the rendered objects - The line width of the rendered objects + 렌더링 된 객체의 선 너비 @@ -241,7 +241,7 @@ The font of the tag text - The font of the tag text + 태그 텍스트의 글꼴 @@ -256,12 +256,12 @@ The rotation of the tag text - The rotation of the tag text + 태그 텍스트의 회전 A margin inside the boundary - A margin inside the boundary + 경계 내부의 여백 @@ -281,12 +281,12 @@ The width of the sheet - The width of the sheet + 시트의 너비 The height of the sheet - The height of the sheet + 시트의 높이 @@ -296,7 +296,7 @@ The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + 프로파일을 기반으로 하지 않는 경우 이 파이프의 지름 @@ -321,7 +321,7 @@ The curvature radius of this connector - The curvature radius of this connector + 이 커넥터의 곡률 반경 @@ -331,7 +331,7 @@ The type of this connector - The type of this connector + 이 커넥터의 유형 @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ 글꼴 크기 - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts 글자의 글꼴 크기 - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Components @@ -2057,7 +2057,7 @@ 이 객체의 구성 요소 - + Axes 축 @@ -2067,27 +2067,27 @@ 축 만들기 - + Remove 제거 - + Add 추가 - + Axis 축 - + Distance Distance - + Angle 각 @@ -2197,7 +2197,7 @@ 구조 만들기 - + Create Wall 벽 만들기 @@ -2222,42 +2222,42 @@ 창 만들기 - + Edit 편집 - + Create/update component 구성 요소 만들기/갱신 - + Base 2D object 기본 개체 - + Wires 전선 - + Create new component 새 구성 요소 만들기 - + Name 이름 - + Type 타입 - + Thickness 두께 @@ -2332,22 +2332,22 @@ 셰이프를 계산할 수 없습니다 - + Merge Wall 벽 합치기 - + Please select only wall objects Please select only wall objects - + Merge Walls 벽 합치기 - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2599,7 +2599,7 @@ Chamfer - 생성: 모따기(Chamfer) + 모따기 @@ -2799,22 +2799,22 @@ 문 - + Hinge 경첩 - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ 새 레이어 - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ 그리드 만들기 - + Label Label - + Axis system components Axis system components - + Grid 격자 - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center 센터 @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment 정렬 - + Left 왼쪽 - + Right 오른쪽 - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 벽 - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls 벽 합치기 - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall 벽 - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.qm b/src/Mod/Arch/Resources/translations/Arch_lt.qm index 8ee70cccfa..34060c8631 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_lt.qm and b/src/Mod/Arch/Resources/translations/Arch_lt.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.ts b/src/Mod/Arch/Resources/translations/Arch_lt.ts index 0789267994..05db4f3ead 100644 --- a/src/Mod/Arch/Resources/translations/Arch_lt.ts +++ b/src/Mod/Arch/Resources/translations/Arch_lt.ts @@ -376,7 +376,7 @@ The chamfer length of this element - Šio elemento nuožulos ilgis + Šio elemento nuožulos plotis @@ -949,32 +949,32 @@ Jei nurodyta „Tiesa“, elementas bus sutapdintas su ašimis - + The length of this wall. Not used if this wall is based on an underlying object Sienos ilgis. Nenaudojamas jeigu siena sukurta ant po ja esančio objekto - + The width of this wall. Not used if this wall is based on a face Sienos storis. Nenaudojamas jeigu siena kuriama ant paviršiaus - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Sienos aukštis. Reikšmė 0 automatinis. Nenaudojama jeigu siena sukurta pilnaviduriais tūriais - + The alignment of this wall on its base object, if applicable Sienos lygiavimas ant bazės objekto, jeigu galimas - + The face number of the base object used to build this wall Bazinio objekto plokštumų skaičius sienai sukurti - + The offset between this wall and its baseline (only for left and right alignments) Postūmis tarp šios sienos ir jos pagrindo linijos (tik kairinei arba dešininei lygiuotei) @@ -1054,7 +1054,7 @@ Laiptasijų užleidimas virš pakopų apačios - + The number of the wire that defines the hole. A value of 0 means automatic Laidų kiekis nustatantis skylę. Reikšmė 0 automatinis @@ -1074,7 +1074,7 @@ Atlikti pakeitimus kiekvienai etiketei - + The axes this system is made of Sistemos ašys sukurtos iš @@ -1204,7 +1204,7 @@ Šrifto dydis - + The placement of this axis system Ašių sistemos įterpimo vieta @@ -1224,57 +1224,57 @@ Objekto linijos plotis - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark Transformacija atliekama lygio ženklui - + If true, show the level Jei tiesa, rodyti lygį - + If true, show the unit on the level tag Jei tiesa, rodyti lygio etikės vienetus - + If true, when activated, the working plane will automatically adapt to this level Jei tiesa, kai aktyvuota, darbo plokštuma automatiškai prisitaikys prie šio lygio - + The font to be used for texts Šriftas naudojamas raštui - + The font size of texts Rašmenų šrifto dydis - + Camera position data associated with this object Kameros padėties duomenys, susieti su šiuo objektu - + If set, the view stored in this object will be restored on double-click Jei nustatyta, vaizdas saugomas objekte bus sugrąžintas spragtelėjus du kartus - + The individual face colors Atskiro paviršiaus spalvos - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block Bloko aukštis - + The horizontal offset of the first line of blocks Horizontalus atsitraukimas nuo pirmos blokų linijos - + The horizontal offset of the second line of blocks Horizontalus atsitraukimas nuo antros blokų linijos - + The size of the joints between each block Jungties tarp blokų dydis - + The number of entire blocks Visų blokų skaičius - + The number of broken blocks Išskaidytų blokų skaičius @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Dalys @@ -2057,7 +2057,7 @@ Objekto komponentai - + Axes Ašys @@ -2067,27 +2067,27 @@ Kurti ašį - + Remove Pašalinti - + Add Pridėti - + Axis Ašis - + Distance Distance - + Angle Kampas @@ -2197,7 +2197,7 @@ Kurti konstrukciją - + Create Wall Kurti sieną @@ -2222,42 +2222,42 @@ Kurti langą - + Edit Taisyti - + Create/update component Kurti/atnaujinti komponentą - + Base 2D object Bazė 2D objektas - + Wires Laidai - + Create new component Kurti naują komponentą - + Name Pavadinimas - + Type Rūšis - + Thickness Storis @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2599,7 +2599,7 @@ Chamfer - Chamfer + Nusklembti @@ -2799,22 +2799,22 @@ Durys - + Hinge Vyriai/Lankstai - + Opening mode Angos būsena - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Tinklelis - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Vidurys @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Iš kairės - + Right Iš dešinės - + Use sketches Use sketches @@ -3641,12 +3641,12 @@ The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + Biblioteka „shapefile“ gali būti parsiųsta iš nurodyto adreso ir įdiegta į jūsų makrokomandų aplanką: The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Python'o biblioteka „shapefile“ nerasta kompiuteryje. Ar parsiųsti ją iš <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Ji bus patalpinta jūsų makrokomandų aplanke. @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wall - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Wall - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index f476096c3a..9460d90084 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -949,32 +949,32 @@ Wanneer waar, dan wordt het element uigelijnd met de assen - + The length of this wall. Not used if this wall is based on an underlying object De lengte van deze muur. Dit wordt niet gebruikt als deze muur is gebaseerd op een onderliggend object - + The width of this wall. Not used if this wall is based on a face De breedte van deze muur. Ongebruikt wanneer deze muur is gebaseerd op een onderliggend object - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid De hoogte van deze muur. Gebruik 0 voor automatisch. Ongebruikt als deze muur is gebaseerd op een volumemodel - + The alignment of this wall on its base object, if applicable De richting van deze muur ten opzichte van zijn basisobject, indien toepasbaar - + The face number of the base object used to build this wall Het vlaknummer van het basisobject dat wordt gebruikt om deze muur op te bouwen - + The offset between this wall and its baseline (only for left and right alignments) De tussenafstand tussen deze muur en zijn basislijn (alleen voor links en rechtse uitlijningen) @@ -1054,7 +1054,7 @@ De wel van de trede - + The number of the wire that defines the hole. A value of 0 means automatic Het nummer van de draad die het gat definieert. Een waarde van 0 betekent automatisch @@ -1074,7 +1074,7 @@ Een verandering aanbrengen op elk etiket - + The axes this system is made of De assen waar dit systeem uit bestaat @@ -1204,7 +1204,7 @@ De groote van het lettertype - + The placement of this axis system De plaatsing van dit as-systeem @@ -1224,57 +1224,57 @@ De lijnbreedte van dit object - + An optional unit to express levels Een optionele eenheid om niveaus in uit te drukken - + A transformation to apply to the level mark Een transformatie om toe te passen op de niveau markering - + If true, show the level Wanneer waar, toon het niveau - + If true, show the unit on the level tag Wanneer waar, toon de eenheid op de niveau markering - + If true, when activated, the working plane will automatically adapt to this level Wanneer waar, als geactiveerd, dan zal het werkvlak zich automatisch aanpassen aan dit niveau - + The font to be used for texts Het lettertype dat wordt gebruikt voor teksten - + The font size of texts De tekengrootte van teksten - + Camera position data associated with this object Camera positiegegevens geassioceerd met dit object - + If set, the view stored in this object will be restored on double-click Wanneer geactiveerd dan zal de weergave welke is opgeslagen in dit object hersteld worden bij een dubbelklik - + The individual face colors De individuele kleuren van de aanzichten - + If set to True, the working plane will be kept on Auto mode Wanneer ingesteld als Waar, dan blijft het werkvlak in de Automatische stand @@ -1419,42 +1419,42 @@ De richting van van vlucht na de landing - + Enable this to make the wall generate blocks Activeer dit om de muur blokken te laten genereren - + The length of each block De lengte van ieder blok - + The height of each block De lengte van ieder blok - + The horizontal offset of the first line of blocks De horizontale compensatie van de eerste regel van blokken - + The horizontal offset of the second line of blocks De horizontale compensatie van de tweede regel van blokken - + The size of the joints between each block De grootte van de verbindingen tussen elk blok - + The number of entire blocks Het aantal hele blokken - + The number of broken blocks Het aantal gebroken blokken @@ -1604,27 +1604,27 @@ De dikte van de optreden - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Indien waar, toon de objecten in dit gebouwonderdeel vervat die deze lijn-, kleur- en transparantie-instellingen zullen aannemen - + The line width of child objects De lijnbreedte van kinderobjecten - + The line color of child objects De lijnkleur van kinderobjecten - + The shape color of child objects De kleur van de vorm van kinderobjecten - + The transparency of child objects De transparantie van kinderobjecten @@ -1644,37 +1644,37 @@ Deze eigenschap bewaart een uitvinderrepresentatie voor dit object - + If true, display offset will affect the origin mark too Indien waar, zal de weergave van de verschuiving beginpuntmarkering ook beïnvloeden - + If true, the object's label is displayed Indien waar, als geactiveerd, dan zal de label van het object worden weergegeven - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Als dit is ingeschakeld, zal de uitvinderrepresentatie van dit object worden opgeslagen in het FreeCAD-bestand, waardoor het in andere bestanden in de lichtgewichtmodus kan worden gerefereerd. - + A slot to save the inventor representation of this object, if enabled Een sleuf voor het opslaan van de uitvinderrepresentatie van dit object, indien ingeschakeld - + Cut the view above this level Snij de weergave boven dit niveau - + The distance between the level plane and the cut line De afstand tussen het niveausvlak en de snijlijn - + Turn cutting on when activating this level Schakel snijden in bij het activeren van dit niveau @@ -1869,22 +1869,22 @@ Hoe de staven te tekenen - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Dit overschrijft het Breedte-attribuut om de breedte van elk segment van de muur in te stellen. Genegeerd als het basisobject informatie over de breedte geeft, met de getWidths() methode. (Het 1e waarde overschrijft het 'Breedte'-attribuut voor het 1e segment van de muur; als een waarde nul is, wordt de 1e waarde van 'OverrideWidth' gevolgd) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Dit overschrijft het uitlijningsattribuut om de uitlijning van elk segment van de muur in te stellen. Genegeerd als Basisobject Informatie uitlijnen geeft, met de getAligns() methode. (De 1e waarde overschrijft het attribuut 'Uitlijnen' voor het 1e segment van de muur; als een waarde niet 'Links, Rechts, Midden' is, wordt de 1e waarde van 'OverrideAlign' gevolgd) - + The area of this wall as a simple Height * Length calculation Het gebied van deze muur als een simpele hoogte * lengteberekening - + If True, double-clicking this object in the tree activates it Indien waar, wordt dit object actief door op het te dubbelklikken in de boomstructuur @@ -2047,7 +2047,7 @@ Arch - + Components Componenten @@ -2057,7 +2057,7 @@ Onderdelen van dit object - + Axes Assen @@ -2067,27 +2067,27 @@ Maak as - + Remove Verwijderen - + Add Toevoegen - + Axis As - + Distance Afstand - + Angle Hoek @@ -2197,7 +2197,7 @@ Structuur aanmaken - + Create Wall Muur maken @@ -2222,42 +2222,42 @@ Maak venster - + Edit Bewerken - + Create/update component Component maken of bijwerken - + Base 2D object 2D basisobject - + Wires Draden - + Create new component Maak nieuw component - + Name Naam - + Type Type - + Thickness Dikte @@ -2332,22 +2332,22 @@ Kon geen vorm berekenen - + Merge Wall Muren samenvoegen - + Please select only wall objects Selecteer alleen muur objecten - + Merge Walls Wanden samenvoegen - + Distances (mm) and angles (deg) between axes Afstanden (mm) en hoeken (graden) tussen assen @@ -2798,22 +2798,22 @@ Deur - + Hinge Scharnier - + Opening mode Openings mode - + Get selected edge Krijg de geselcteerde rand - + Press to retrieve the selected edge Druk om de geselecteerde rand terug te halen @@ -2843,17 +2843,17 @@ Nieuwe laag - + Wall Presets... Voorinstellingen muur... - + Hole wire Draad gat - + Pick selected Neem geselecteerde @@ -2868,67 +2868,67 @@ Creëer grid - + Label Label - + Axis system components Onderdelen van het as-systeem - + Grid Raster - + Total width Totale breedte - + Total height Totale hoogte - + Add row Rij toevoegen - + Del row Rij verwijderen - + Add col Kolom toevoegen - + Del col Kolom verwijderen - + Create span Maak overspanning - + Remove span Verwijder overspanning - + Rows Rijen - + Columns Kolommen @@ -2943,12 +2943,12 @@ Begrensde ruimte - + Error: Unable to modify the base object of this wall Fout: Veranderen van de basis van deze muur is niet mogelijk - + Window elements Venster elementen @@ -3013,22 +3013,22 @@ Selecteer alstublieft minimaal 1 as - + Auto height is larger than height Automatisch geselecteerde hoogte is groter dan object hoogte - + Total row size is larger than height Totale rij maat is groter dan de object hoogte - + Auto width is larger than width Automatische breedte is groter dan object breedte - + Total column size is larger than width Totale kolommaat is groter dan object breedte @@ -3243,7 +3243,7 @@ Grootte aanpassen - + Center Middelpunt @@ -3278,12 +3278,12 @@ Snijpunt gevonden. - + The selected wall contains no subwall to merge De geselecteerde muur bevat geen submuur om mee samen te voegen - + Cannot compute blocks for wall Kan geen blokken voor muur berekenen @@ -3293,27 +3293,27 @@ Kies een vlak op een bestaand object of selecteer een voorinstelling - + Unable to create component Er kan geen component gemaakt worden - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Het nummer van de draad, die een gat in het gastheer-object, definieert. Een waarde van nul zal automatisch de grootste draad aannemen - + + default + standaard - + If this is checked, the default Frame value of this window will be added to the value entered here Als u dit selectievakje aanvinkt, zal de standaard Frame-waarde van dit venster worden toegevoegd aan de waarde die u hier invoert - + If this is checked, the default Offset value of this window will be added to the value entered here Als u dit selectievakje aanvinkt, zal de standaard Frame-waarde van dit venster worden toegevoegd aan de waarde die u hier invoert @@ -3468,37 +3468,37 @@ Verder&gaan - + First point of wall Eerste punt van de muur - + Wall options Muuropties - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Deze lijst toont alle MultiMaterialen objecten van dit document. Maak er enkele aan om de wandtypen te definiëren. - + Alignment Uitlijning - + Left Links - + Right Rechts - + Use sketches Gebruik schetsen @@ -3678,17 +3678,17 @@ Als uitvoering = 0 dan is de uitvoering zo berekend dat de hoogte hetzelfde is a Muur - + This window has no defined opening Het raam heeft geen gedefiniëerde opening - + Invert opening direction Draai openingsrichting om - + Invert hinge position Draai scharnier positie om @@ -3944,7 +3944,7 @@ Vloer object wordt niet gemaakt. Arch_AxisTools - + Axis tools Assen gereedschap @@ -4118,62 +4118,62 @@ Vloer object wordt niet gemaakt. Arch_Grid - + The number of rows Aantal rijen - + The number of columns Aantal kolommen - + The sizes for rows De grootte van rijen - + The sizes of columns De grootte van kolommen - + The span ranges of cells that are merged together Het bereik van cellen die zijn samengevoegd - + The type of 3D points produced by this grid object Het type van 3D-punten geproduceerd door dit grid object - + The total width of this grid De totale breedte van dit grid - + The total height of this grid De totale hoogte van dit grid - + Creates automatic column divisions (set to 0 to disable) Verdeel de kolombreedte automatisch (stel in op 0 om niet te gebruiken) - + Creates automatic row divisions (set to 0 to disable) Verdeelt automatische rij divisies (ingesteld op 0 om onbruikbaar te maken) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Wanneer in de rand middelpunt modus, als dit raster moet de onderliggende onderdelen heroriënteren langs de rand normalen of niet - + The indices of faces to hide De indexcijfers van de te verbergen vlakken @@ -4215,12 +4215,12 @@ Vloer object wordt niet gemaakt. Arch_MergeWalls - + Merge Walls Wanden samenvoegen - + Merges the selected walls, if possible Voegt de geselecteerde wanden samen, indien mogelijk @@ -4595,12 +4595,12 @@ Vloer object wordt niet gemaakt. Arch_Wall - + Wall Muur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Maak een muurobject vanaf nul of van een geselecteerd object (draad, vlak of volumemodel) @@ -4924,7 +4924,7 @@ Laat deze leeg om alle objecten uit het document te gebruiken Draft - + Writing camera position Camerapositie schrijven diff --git a/src/Mod/Arch/Resources/translations/Arch_no.ts b/src/Mod/Arch/Resources/translations/Arch_no.ts index 76222a92a6..89481d9bd3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_no.ts +++ b/src/Mod/Arch/Resources/translations/Arch_no.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Komponenter @@ -2057,7 +2057,7 @@ Elementer i dette objektet - + Axes Akser @@ -2067,27 +2067,27 @@ Opprette akse - + Remove Fjern - + Add Legg til - + Axis Akse - + Distance Avstand - + Angle Vinkel @@ -2197,7 +2197,7 @@ Opprett struktur - + Create Wall Opprett vegg @@ -2222,42 +2222,42 @@ Lag vindu - + Edit Rediger - + Create/update component Opprett/oppdater komponent - + Base 2D object Base 2D object - + Wires Wires - + Create new component Opprett ny komponent - + Name Navn - + Type Type - + Thickness Tykkelse @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2799,22 +2799,22 @@ Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Rutenett - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Midtstill @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Venstre - + Right Høyre - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wall - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Wall - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index f9e2d127a9..521c39523e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index 628d391199..7c68bf54ef 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -101,7 +101,7 @@ The electric power needed by this equipment in Watts - Potrzebna moc elektryczna obiektu w Watach [W] + Zapotrzebowanie na moc elektryczną osprzętu w Watach [W] @@ -751,12 +751,12 @@ The electric power needed by the equipment of this space in Watts - Zapotrzebowanie mocy elektrycznej dla tego urzadzeń w tym pomieszczeniu + Zapotrzebowanie mocy elektrycznej wyposażenia w tym pomieszczeniu w Watach [W] If True, Equipment Power will be automatically filled by the equipment included in this space - Jeśli True, moc urządzenia zostanie automatycznie wypełniona przez sprzęt znajdujący się w tym miejscu + Jeśli parametr ma wartość Prawda, pole Sprzęt Zasilający zostanie automatycznie uzupełnione przez wyposażenie zawarte w tym miejscu @@ -949,32 +949,32 @@ Jeśli to prawda, element jest wyrównany z osiami - + The length of this wall. Not used if this wall is based on an underlying object Długość tej ściany. Nieużywane, jeśli ściana opiera się na ukrytym obiekcie - + The width of this wall. Not used if this wall is based on a face Szerokość tej ściany. Nieużywane, jeśli ściana opiera się na ścianie - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Wysokość tej ściany. Zachowaj 0 dla automatycznego. Nieużywane, jeśli ściana jest oparta na bryle - + The alignment of this wall on its base object, if applicable Wyrównanie tej ściany na jej obiekcie bazowym, jeśli dotyczy - + The face number of the base object used to build this wall Numer ściany bazowego obiektu użytego do zbudowania tej ściany - + The offset between this wall and its baseline (only for left and right alignments) Przesunięcie między tą ścianą a linią bazową (tylko w przypadku wyrównania w lewo i w prawo) @@ -1054,7 +1054,7 @@ Nakładanie się podłużnic powyżej dołu bieżnika - + The number of the wire that defines the hole. A value of 0 means automatic Liczba odcinków polilinii, która definiuje otwór. Wartość 0 oznacza wartość automatyczną @@ -1074,7 +1074,7 @@ Transformacja do zastosowania dla każdej etykiety - + The axes this system is made of Osie, z których składa się ten system @@ -1204,7 +1204,7 @@ Rozmiar czcionki - + The placement of this axis system Umiejscowienie systemu osi @@ -1224,57 +1224,57 @@ Szerokość linii tego obiektu - + An optional unit to express levels Opcjonalna jednostka do wyrażenia poziomów - + A transformation to apply to the level mark Transformacja, która ma być zastosowana do zaznaczenia kondygnacji - + If true, show the level Jeżeli prawda, pokaż kondygnację - + If true, show the unit on the level tag Jeżeli prawda, pokazuje znaczniki jednostki kondygnacji - + If true, when activated, the working plane will automatically adapt to this level Jeżeli prawda, wtedy aktywuje się, płaszczyzna robocza automatycznie dostosowuje się do tej kondygnacji - + The font to be used for texts Czcionka dla tekstów - + The font size of texts Rozmiar czcionki dla tekstów - + Camera position data associated with this object Pozycja kamery związana z tym obiektem - + If set, the view stored in this object will be restored on double-click Jeśli ustawiona, widok zapisany w tym obiekcie zostanie przywrócony po dwukrotnym kliknięciu - + The individual face colors Indywidualny kolor czcionki - + If set to True, the working plane will be kept on Auto mode Przy ustawieniu True płaszczyzna robocza pozostanie w trybie automatycznego dopasowania @@ -1419,42 +1419,42 @@ Kierunek klatki schodowej po wyjściu - + Enable this to make the wall generate blocks Włącz to, aby ściana generowała bloki - + The length of each block Długość każdego bloku - + The height of each block Wysokość każdego bloku - + The horizontal offset of the first line of blocks Przesunięcie poziome pierwszej linii bloków - + The horizontal offset of the second line of blocks Przesunięcie poziome drugiej linii bloków - + The size of the joints between each block Rozmiar złącza między każdym blokiem - + The number of entire blocks Liczba całych bloków - + The number of broken blocks Liczba uszkodzonych bloków @@ -1604,27 +1604,27 @@ Grubość podstopni - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Jeśli prawda, pokaż obiekty zawarte w tej części budynku przyjmą te linie, ustawienia kolorów i przezroczystości - + The line width of child objects Szerokość linii obiektów podrzędnych - + The line color of child objects Kolor linii obiektów podrzędnych - + The shape color of child objects Kolor kształtu obiektów podrzędnych - + The transparency of child objects Przezroczystość obiektów podrzędnych @@ -1644,37 +1644,37 @@ Ta właściwość przechowuje reprezentację twórcy tego obiektu - + If true, display offset will affect the origin mark too Jeśli wartość ta wynosi true, przesunięcie wyświetlania będzie miało również wpływ na symbol odniesienia położenia - + If true, the object's label is displayed Jeśli prawda, etykieta obiektu jest wyświetlana - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Jeśli ta opcja jest włączona, reprezentacja inventor tego obiektu zostanie zapisana w pliku FreeCAD, umożliwiając odniesienie do niego w innych plikach w trybie uproszczonym. - + A slot to save the inventor representation of this object, if enabled Miejsce do zapisania reprezentacji wynalazcy tego obiektu, jeśli jest włączone - + Cut the view above this level Wytnij widok powyżej tego poziomu - + The distance between the level plane and the cut line Odległość między płaszczyzną poziomą a linią cięcia - + Turn cutting on when activating this level Włącz cięcie podczas aktywacji tego poziomu @@ -1869,22 +1869,22 @@ Jak narysować pręty - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Nadpisuje atrybut szerokości poszczególnych segmentów ściany. Nie zostanie uwzględnione, jeśli obiekt podstawowy zawiera już informacje o szerokościach, dane metodą getWidths(). (Pierwsza wartość zastępuje atrybut 'Szerokość' dla pierwszego segmentu ściany; jeśli wartość jest równa zeru, pierwsza wartość 'Nadpisana' zostanie użyta) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Nadpisuje atrybut szerokości poszczególnych segmentów ściany. Nie zostanie uwzględnione, jeśli obiekt podstawowy zawiera już informacje o szerokościach, dane metodą getWidths(). (Pierwsza wartość zastępuje atrybut 'Szerokość' dla pierwszego segmentu ściany; jeśli wartość jest równa zeru, pierwsza wartość 'Nadpisana' zostanie użyta) - + The area of this wall as a simple Height * Length calculation Powierzchnia tej ściany jako prosta wysokość * Obliczenie długości - + If True, double-clicking this object in the tree activates it Jeśli ma wartość Prawda, podwójne kliknięcie tego obiektu w drzewie aktywuje go @@ -2047,7 +2047,7 @@ Arch - + Components Fragmenty @@ -2057,7 +2057,7 @@ Składniki obiektu - + Axes Osie @@ -2067,27 +2067,27 @@ Utwórz oś - + Remove Skasuj - + Add Dodaj - + Axis Oś - + Distance Odległość - + Angle Kąt @@ -2197,7 +2197,7 @@ Utwórz strukturę - + Create Wall Utwórz ścianę @@ -2222,42 +2222,42 @@ Utwórz Okno - + Edit Edycja - + Create/update component Utwórz / uaktualnij komponent - + Base 2D object Podstawowy obiekt 2D - + Wires Linie łamane - + Create new component Utwórz nowy komponent - + Name Nazwa - + Type Typ - + Thickness Grubość @@ -2319,7 +2319,7 @@ Length - Długość + Odstęp @@ -2332,22 +2332,22 @@ Nie można obliczyć kształtu - + Merge Wall Scal ścianę - + Please select only wall objects Proszę wybrać tylko elementy typu ściana - + Merge Walls Scal ściany - + Distances (mm) and angles (deg) between axes Odległości (mm) i kąty (stopnie) pomiędzy osiami @@ -2799,22 +2799,22 @@ Drzwi - + Hinge Zawias - + Opening mode Tryb otwierania - + Get selected edge Zdobądź wybraną krawędź - + Press to retrieve the selected edge Naciśnij, aby pobrać wybraną krawędź @@ -2844,17 +2844,17 @@ Nowa warstwa - + Wall Presets... Ustawienia wstępne dla ściany... - + Hole wire Szkielet otworu - + Pick selected Wybierz zaznaczone @@ -2869,67 +2869,67 @@ Utwórz siatkę - + Label Etykieta - + Axis system components Składniki systemu osi - + Grid Siatka - + Total width Szerokość całkowita - + Total height Wysokość całkowita - + Add row Dodaj wiersz - + Del row Usuń wiersz - + Add col Dodaj kolumnę - + Del col Usuń kolumnę - + Create span Utwórz zakres - + Remove span Usuń zakres - + Rows Wiersze - + Columns Kolumny @@ -2944,12 +2944,12 @@ Granice przestrzeni - + Error: Unable to modify the base object of this wall Błąd: Nie można zmodyfikować obiektu podstawowego tej ściany - + Window elements Elementy okna @@ -3014,22 +3014,22 @@ Zaznacz przynajmniej jedną oś - + Auto height is larger than height Automatyczna wysokość jest większa niż wielkość - + Total row size is larger than height Rozmiar wiersza jest większy niż wysokość - + Auto width is larger than width Automatyczna szerokość jest większa niż szerokość - + Total column size is larger than width Łączny rozmiar kolumny jest większy niż szerokość @@ -3196,7 +3196,7 @@ Profile - Profil + Kontur @@ -3244,7 +3244,7 @@ Zmień rozmiar - + Center Wyśrodkowane @@ -3279,12 +3279,12 @@ Znaleziono przecięcie. - + The selected wall contains no subwall to merge Wybrana płaszczyzna nie zawiera podpłaszczyzny do scalenia - + Cannot compute blocks for wall Nie można obliczyć liczby bloków dla ściany @@ -3294,27 +3294,27 @@ Wybierz płaszczyznę na istniejącym obiekcie albo wybierz ustawienie wstępne - + Unable to create component Nie można utworzyć komponentu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numer drutu definiującego otwór w obiekcie obsługującym. Wartość zero automatycznie przyjmie największy drut - + + default + domyślny - + If this is checked, the default Frame value of this window will be added to the value entered here Jeśli to pole jest zaznaczone, domyślna wartość ramki dla tego okna zostanie dodana do wartości wprowadzonej tutaj - + If this is checked, the default Offset value of this window will be added to the value entered here Jeśli to pole jest zaznaczone, domyślna wartość tego okna zostanie dodana do wartości wprowadzonej tutaj @@ -3469,37 +3469,37 @@ Kontynuuj - + First point of wall Pierwszy punkt ściany - + Wall options Opcje ściany - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Ta lista pokazuje wszystkie obiekty wielo-materiałowe tego dokumentu. Utwórz kilka aby zdefiniować typy ścian. - + Alignment Wyrównanie - + Left Od lewej - + Right Od prawej - + Use sketches Użyj szkiców @@ -3679,17 +3679,17 @@ Jeśli Bieg = 0, wówczas Bieg jest obliczany tak, aby wysokość była taka sam Ściana - + This window has no defined opening To okno nie ma określonego sposobu otwierania - + Invert opening direction Odwróć kierunek otwierania - + Invert hinge position Odwróć pozycję zawiasów @@ -3942,7 +3942,7 @@ Tworzenie piętra zostało przerwane. Arch_AxisTools - + Axis tools Narzędzia osi @@ -4116,62 +4116,62 @@ Tworzenie piętra zostało przerwane. Arch_Grid - + The number of rows Ilość wierszy - + The number of columns Ilość kolumn - + The sizes for rows Rozmiary dla wierszy - + The sizes of columns Rozmiary kolumn - + The span ranges of cells that are merged together Rozpiętość zakresu komórek, które są ze sobą połączone - + The type of 3D points produced by this grid object Typ punktów 3D generowanych przez ten obiekt siatki - + The total width of this grid Szerokość całkowita siatki - + The total height of this grid Całkowita wysokość tej siatki - + Creates automatic column divisions (set to 0 to disable) Tworzy automatyczny podział kolumn (ustaw wartość na 0 aby wyłączyć) - + Creates automatic row divisions (set to 0 to disable) Tworzy automatyczny podział wierszy (ustaw wartość na 0 aby wyłączyć) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not W trybie krawędzi punktu środkowego, czy ta siatka musi zmienić orientację swoich dzieci wzdłuż prostopadłych krawędzi, czy nie - + The indices of faces to hide Wskaźniki powierzchni do ukrycia @@ -4213,12 +4213,12 @@ Tworzenie piętra zostało przerwane. Arch_MergeWalls - + Merge Walls Scal ściany - + Merges the selected walls, if possible Połącz wybrane ściany, jeśli możliwe @@ -4348,7 +4348,7 @@ Tworzenie piętra zostało przerwane. Profile - Profil + Kontur @@ -4593,12 +4593,12 @@ Tworzenie piętra zostało przerwane. Arch_Wall - + Wall Ściana - + Creates a wall object from scratch or from a selected object (wire, face or solid) Tworzy obiekt Ściana od podstaw lub z wybranego obiektu (szkieletu, wieloboku lub bryły) @@ -4911,7 +4911,7 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu Unnamed schedule - Nienazwany harmonogram + Harmonogram bez przypisanej nazwy @@ -4922,7 +4922,7 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu Draft - + Writing camera position Pozycja kamery pisania diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 37c70a58ec..1ce6c82dc7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -949,32 +949,32 @@ Se verdadeiro, os elementos estarão alinhados com os eixos - + The length of this wall. Not used if this wall is based on an underlying object O comprimento desta parede. Não é usado se esta parede for baseada em um objeto subjacente - + The width of this wall. Not used if this wall is based on a face A largura desta parede. Não é utilizada se a parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid A altura desta parede. Mantenha 0 para automático. Não é utilizada se a parede for baseada em um sólido - + The alignment of this wall on its base object, if applicable O alinhamento desta parede em seu objeto base, se tiver - + The face number of the base object used to build this wall O número da face do objeto de base a ser usada para construir o telhado - + The offset between this wall and its baseline (only for left and right alignments) A distância entre a parede e sua linha de base (somente para alinhamentos esquerdo e direito) @@ -1054,7 +1054,7 @@ A distância das longarinas acima da base do degrau - + The number of the wire that defines the hole. A value of 0 means automatic O número do arame que define o furo. Um valor de 0 significa automática @@ -1074,7 +1074,7 @@ Uma transformação para aplicar em cada rótulo - + The axes this system is made of Os eixos que compõem este sistema @@ -1204,7 +1204,7 @@ Tamanho da fonte - + The placement of this axis system Localização do sistema de coordenadas @@ -1224,57 +1224,57 @@ A largura da linha deste objeto - + An optional unit to express levels Uma unidade opcional para níveis - + A transformation to apply to the level mark Uma transformação a ser aplicada à marca de nível - + If true, show the level Se verdadeiro, mostra o nível - + If true, show the unit on the level tag Se verdadeiro, mostrar a unidade na marca de nível - + If true, when activated, the working plane will automatically adapt to this level Se verdadeiro, quando ativado, o plano de trabalho será automaticamente adaptado a este nível - + The font to be used for texts A fonte a ser usada para textos - + The font size of texts O tamanho da fonte dos textos - + Camera position data associated with this object Dados de posição de câmera associados a esse objeto - + If set, the view stored in this object will be restored on double-click Se ativado, o modo de exibição armazenado neste objeto será restaurado quando duplo-clicado - + The individual face colors As cores de faces individuais - + If set to True, the working plane will be kept on Auto mode Se definido como verdadeiro, o plano de trabalho será mantido no modo automático @@ -1419,42 +1419,42 @@ A direção do lance após o patamar - + Enable this to make the wall generate blocks Habilite isso para fazer a parede gerar blocos - + The length of each block O comprimento de cada bloco - + The height of each block A altura de cada bloco - + The horizontal offset of the first line of blocks O deslocamento horizontal da primeira linha de bloco - + The horizontal offset of the second line of blocks O deslocamento horizontal da segunda linha de bloco - + The size of the joints between each block O tamanho das juntas de cada bloco - + The number of entire blocks O número de blocos inteiros - + The number of broken blocks O número de blocos quebrados @@ -1604,27 +1604,27 @@ Espessura dos degraus - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Se é verdadeiro, mostrar os objetos contidos nesta Parte do Edifício que receberão estas configurações de linha, cor e transparência - + The line width of child objects A largura da linha dos objetos filhos - + The line color of child objects A cor da linha dos objetos filhos - + The shape color of child objects A cor da forma dos objetos filhos - + The transparency of child objects A transparência dos objetos filhos @@ -1644,37 +1644,37 @@ Esta propriedade armazena uma representação de inventário para este objeto - + If true, display offset will affect the origin mark too Se verdadeiro, o deslocamento da exibição também afetará a marca de origem - + If true, the object's label is displayed Se verdadeiro, o rótulo do objeto é exibido - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Se ativado, a representação inventor deste objeto será salva no arquivo FreeCAD, permitindo referenciá-lo em outro arquivo em modo leve. - + A slot to save the inventor representation of this object, if enabled Um slot para salvar a representação do inventor deste objeto, se ativado - + Cut the view above this level Recortar a visão acima deste nível - + The distance between the level plane and the cut line A distância entre o nível do plano e a linha de corte - + Turn cutting on when activating this level Ativar o corte ao ativar este nível @@ -1869,22 +1869,22 @@ Tipo dos elementos intermediários - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Isso substitui o atributo Largura para definir a largura de cada segmento de parede. Ignorado se o objeto Base fornecer informações de larguras, com método getWidths(). (O primeiro valor substitui o atributo 'Largura' para o primeiro segmento de parede; se um valor for zero, primeiro valor de 'OverrideWidth' será seguido) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Isso substitui o atributo Align para definir o alinhamento de cada segmento de parede. Ignorado se o objeto Base fornecer informações de larguras, com método getAligns(). (O primeiro valor substitui o atributo 'Align' para o primeiro segmento de parede; se um valor for zero, primeiro valor de 'OverrideAlign será seguido) - + The area of this wall as a simple Height * Length calculation A área desta parede como uma simples cálculo de altura * comprimento - + If True, double-clicking this object in the tree activates it Se ativado, um duplo clique neste objeto na árvore tornará ele ativo @@ -2047,7 +2047,7 @@ Arch - + Components Componentes @@ -2057,7 +2057,7 @@ Componentes deste objeto - + Axes Eixos @@ -2067,27 +2067,27 @@ Criar eixo - + Remove Remover - + Add Adicionar - + Axis Eixo - + Distance Distância - + Angle Ângulo @@ -2197,7 +2197,7 @@ Criar estrutura - + Create Wall Criar parede @@ -2222,42 +2222,42 @@ Criar uma janela - + Edit Editar - + Create/update component Criar/atualizar um componente - + Base 2D object Objeto base 2D - + Wires Arames - + Create new component Criar um novo componente - + Name Nome - + Type Tipo - + Thickness Espessura @@ -2332,22 +2332,22 @@ Não foi possível calcular uma forma - + Merge Wall Mesclar uma parede - + Please select only wall objects Por favor, selecione apenas objetos de parede - + Merge Walls Mesclar paredes - + Distances (mm) and angles (deg) between axes Distâncias (mm) e ângulos (graus) entre eixos @@ -2799,22 +2799,22 @@ Porta - + Hinge Dobradiça - + Opening mode Modo de abertura - + Get selected edge Usar a aresta selecionada - + Press to retrieve the selected edge Pressione para usar a aresta selecionada @@ -2844,17 +2844,17 @@ Nova Camada - + Wall Presets... Predefinições de parede... - + Hole wire Arame para o furo - + Pick selected Usar seleção @@ -2869,67 +2869,67 @@ Criar Grade - + Label Rótulo - + Axis system components Componentes do sistema de eixos - + Grid Grade - + Total width Largura total - + Total height Altura total - + Add row Adicionar linha - + Del row Remover linha - + Add col Adicionar coluna - + Del col Remover coluna - + Create span Fundir células - + Remove span Remover fundição - + Rows Linhas - + Columns Colunas @@ -2944,12 +2944,12 @@ Limites do espaço - + Error: Unable to modify the base object of this wall Erro: Não foi possível modificar o objeto base desta parede - + Window elements Elementos da janela @@ -3014,22 +3014,22 @@ Por favor, selecione pelo menos um eixo - + Auto height is larger than height Altura automática é maior que a altura - + Total row size is larger than height O tamanho total das linhas é maior que a altura - + Auto width is larger than width Largura automática é maior que a largura - + Total column size is larger than width O tamanho total das colunas é maior que a largura @@ -3244,7 +3244,7 @@ Redimensionar - + Center Centro @@ -3279,12 +3279,12 @@ Interseção encontrada. - + The selected wall contains no subwall to merge A parede selecionada não contém nenhum subparede para mesclar - + Cannot compute blocks for wall Não e possível calcular blocos para esta parede @@ -3294,27 +3294,27 @@ Selecione uma face em um objeto existente ou escolha uma predefinição - + Unable to create component Não é possível criar um componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número do arame que define um furo no objeto. Um valor de zero selecionará automaticamente o arame maior - + + default + padrão - + If this is checked, the default Frame value of this window will be added to the value entered here Se isto estiver marcado, o valor padrão do quadro desta janela será adicionado ao valor inserido aqui - + If this is checked, the default Offset value of this window will be added to the value entered here Se isto estiver marcado, o valor de deslocamento padrão do quadro desta janela será adicionado ao valor inserido aqui @@ -3469,37 +3469,37 @@ Con&tinuar - + First point of wall Primeiro ponto da parede - + Wall options Opções de parede - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Esta lista mostra todos os objetos multi-materiais deste documento. Crie um novo para definir tipos de paredes. - + Alignment Alinhamento - + Left Esquerda - + Right Direito - + Use sketches Usar esboços @@ -3679,17 +3679,17 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Parede - + This window has no defined opening Essa janela não tem abertura definida - + Invert opening direction Inverter direção de abertura - + Invert hinge position Inverter posição da articulação @@ -3925,7 +3925,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Ferramentas de eixos @@ -4099,62 +4099,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Número de linhas - + The number of columns Número de colunas - + The sizes for rows O tamanho das linhas - + The sizes of columns O tamanho das colunas - + The span ranges of cells that are merged together O alcance das células a serem juntadas - + The type of 3D points produced by this grid object O tipo de pontos 3D produzidos por este objeto Grade - + The total width of this grid A largura total desta grade - + The total height of this grid A altura total desta grade - + Creates automatic column divisions (set to 0 to disable) Cria divisões de colunas automaticamente (coloque 0 para desativar) - + Creates automatic row divisions (set to 0 to disable) Cria divisões de linhas automaticamente (coloque 0 para desativar) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Quando estiver em modo Midpoint, se esta grade deve alinhar seus objetos nas arestas ou não - + The indices of faces to hide Os índices das faces que devem ser escondidas @@ -4196,12 +4196,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Mesclar paredes - + Merges the selected walls, if possible Mescla as paredes selecionadas, se possível @@ -4576,12 +4576,12 @@ Floor creation aborted. Arch_Wall - + Wall Parede - + Creates a wall object from scratch or from a selected object (wire, face or solid) Cria uma parede a partir do zero ou de um objeto selecionado (arame, face ou sólido) @@ -4912,7 +4912,7 @@ Se você deixar este campo vazio, nenhuma filtragem será aplicada Draft - + Writing camera position Gravando posição da câmera diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index bc9ea0d839..d8a776297e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index ab73f95e7f..f6cfd7ff8a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -949,32 +949,32 @@ Se verdadeiro, os elementos serão alinhados com os eixos - + The length of this wall. Not used if this wall is based on an underlying object Comprimento da parede. Não é usado se a parede for baseada num objeto - + The width of this wall. Not used if this wall is based on a face Largura da parede. Não é usada, se esta parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Altura desta parede. Manter 0 para automático. Não usada, se esta parede for baseada num sólido - + The alignment of this wall on its base object, if applicable Alinhamento desta parede relativo ao objeto base, se aplicável - + The face number of the base object used to build this wall O número da face do objeto base usado para construir este telhado - + The offset between this wall and its baseline (only for left and right alignments) Distância entre a parede e sua linha base (apenas para alinhamentos esquerdo e direito) @@ -1054,7 +1054,7 @@ A sobreposição das longarinas (vigas de suporte) acima da base do degrau - + The number of the wire that defines the hole. A value of 0 means automatic O número do traço que define o furo. Um valor de 0 significa automático @@ -1074,7 +1074,7 @@ Uma transformação para aplicar a cada rótulo - + The axes this system is made of Os eixos que compõem este sistema @@ -1204,7 +1204,7 @@ O tamanho da fonte - + The placement of this axis system A posição deste sistema de eixos @@ -1224,57 +1224,57 @@ A largura da linha deste objeto - + An optional unit to express levels Uma unidade opcional para expressar níveis - + A transformation to apply to the level mark Uma transformação para aplicar à marca de nível - + If true, show the level Se verdadeiro, mostra o nível - + If true, show the unit on the level tag Se verdadeiro, mostra a unidade na etiqueta de nível - + If true, when activated, the working plane will automatically adapt to this level Se verdadeiro, quando ativado, o plano de trabalho irá automaticamente adaptar-se a este nível - + The font to be used for texts A fonte a ser usada para textos - + The font size of texts O tamanho da fonte dos textos - + Camera position data associated with this object Dados de posição de câmara associados a este objeto - + If set, the view stored in this object will be restored on double-click Se ativado, a posição da vista armazenada neste objeto será restaurada com um duplo-clik - + The individual face colors As cores de faces individuais - + If set to True, the working plane will be kept on Auto mode Se definido como verdadeiro, o plano de trabalho será mantido no modo automático @@ -1419,42 +1419,42 @@ A direção do lanço após o patamar - + Enable this to make the wall generate blocks Ative isto para fazer a parede gerar blocos - + The length of each block O comprimento de cada bloco - + The height of each block A altura de cada bloco - + The horizontal offset of the first line of blocks O deslocamento horizontal da primeira linha de blocos - + The horizontal offset of the second line of blocks O deslocamento horizontal da segunda linha de blocos - + The size of the joints between each block O tamanho das juntas entre cada bloco - + The number of entire blocks O número de blocos inteiros - + The number of broken blocks O número de blocos cortados @@ -1604,27 +1604,27 @@ Espessura dos Degraus - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Se verdadeiro, mostrar os objetos contidos nesta Parte do Edifício que adotarão estas configurações de linha, cor e transparência - + The line width of child objects A largura da linha dos objetos filhos - + The line color of child objects A cor da linha dos objetos filhos - + The shape color of child objects A cor da forma dos objetos filhos - + The transparency of child objects A transparência dos objetos filhos @@ -1644,37 +1644,37 @@ Esta propriedade armazena uma representação de inventário para este objeto - + If true, display offset will affect the origin mark too Se verdadeiro, o deslocamento também afetará a marca de origem - + If true, the object's label is displayed Se verdadeiro, a etiqueta do objeto é exibida - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Se esta opção estiver ativada, a representação do inventor deste objeto será guardada no ficheiro FreeCAD, permitindo referenciá-lo noutros ficheiros em modo leve. - + A slot to save the inventor representation of this object, if enabled Um slot para salvar a representação do inventor deste objeto, se ativado - + Cut the view above this level Cortar a vista acima deste nível - + The distance between the level plane and the cut line A distância entre o plano de nível e a linha de corte - + Turn cutting on when activating this level Ativar o corte ao ativar este nível @@ -1869,22 +1869,22 @@ Como desenhar as diagonais - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2041,13 +2041,13 @@ Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Geometria para além deste valor será cortada. Mantenha zero para ilimitado. Arch - + Components Componentes @@ -2057,7 +2057,7 @@ Componentes deste objeto - + Axes Eixos @@ -2067,27 +2067,27 @@ Criar Eixos - + Remove Remover - + Add Adicionar - + Axis Eixo - + Distance Distância - + Angle Ângulo @@ -2197,7 +2197,7 @@ Criar Estrutura - + Create Wall Criar Parede @@ -2222,42 +2222,42 @@ Criar Janela - + Edit Editar - + Create/update component Criar/atualizar componente - + Base 2D object Objeto 2D de Base - + Wires Aramado - + Create new component Criar novo componente - + Name Nome - + Type Tipo - + Thickness Espessura @@ -2332,22 +2332,22 @@ Não foi possível calcular uma forma - + Merge Wall Unir parede - + Please select only wall objects Por favor, selecione apenas paredes - + Merge Walls Unir paredes - + Distances (mm) and angles (deg) between axes Distâncias entre eixos em (mm) e ângulos em (graus) @@ -2799,22 +2799,22 @@ Porta - + Hinge Dobradiça - + Opening mode Modo de abertura - + Get selected edge Usar a aresta selecionada - + Press to retrieve the selected edge Pressione para usar a aresta selecionada @@ -2844,17 +2844,17 @@ Nova camada - + Wall Presets... Predefinições de parede... - + Hole wire Contorno do furo - + Pick selected Usar seleção @@ -2869,67 +2869,67 @@ Criar grelha - + Label Rótulo - + Axis system components Componentes do sistema de eixos - + Grid Grelha - + Total width Largura total - + Total height Altura total - + Add row Adicionar linha - + Del row Remover linha - + Add col Adicionar coluna - + Del col Remover coluna - + Create span Unir células - + Remove span Remover unir células - + Rows Linhas - + Columns Colunas @@ -2944,12 +2944,12 @@ Limites do espaço - + Error: Unable to modify the base object of this wall Erro: Não foi possível modificar o objeto base desta parede - + Window elements Elementos da janela @@ -3014,22 +3014,22 @@ Por favor, selecione pelo menos um eixo - + Auto height is larger than height Altura automática é maior que a altura - + Total row size is larger than height O tamanho total das linhas é maior que a altura - + Auto width is larger than width Largura automática é maior que a largura - + Total column size is larger than width O tamanho total da coluna é maior que a largura @@ -3244,7 +3244,7 @@ Redimensionar - + Center Centro @@ -3279,12 +3279,12 @@ Interseção encontrada. - + The selected wall contains no subwall to merge A parede selecionada não contém nenhuma subparede para unir - + Cannot compute blocks for wall Não e possível calcular o numero de cortes de blocos para a parede @@ -3294,27 +3294,27 @@ Selecione uma face num objeto existente ou escolha uma predefinição - + Unable to create component Não é possível criar o componente - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número do traço que define um vão no objeto hospedeiro. Um valor zero assume automaticamente o traço maior - + + default + predefinido - + If this is checked, the default Frame value of this window will be added to the value entered here Se marcado, o valor predefinido do aro desta janela será adicionado ao valor inserido aqui - + If this is checked, the default Offset value of this window will be added to the value entered here Se marcado, o valor de deslocamento (recuo) predefinido desta janela será adicionado ao valor inserido aqui @@ -3469,37 +3469,37 @@ Con&tinuar - + First point of wall Primeiro ponto da parede - + Wall options Opções da parede - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Esta lista mostra todos os objetos MultiMateriais deste documento. Crie alguns para definir tipos de paredes. - + Alignment Alinhamento - + Left Esquerda - + Right Direita - + Use sketches Usar esboços @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Parede - + This window has no defined opening This window has no defined opening - + Invert opening direction Inverter direção de abertura - + Invert hinge position Inverter posição da dobradiça @@ -3945,7 +3945,7 @@ Criação de Piso (andar) abortada. Arch_AxisTools - + Axis tools Ferramentas de eixos @@ -4119,62 +4119,62 @@ Criação de Piso (andar) abortada. Arch_Grid - + The number of rows O número de linhas - + The number of columns O número de colunas - + The sizes for rows O tamanho das linhas - + The sizes of columns O tamanho das colunas - + The span ranges of cells that are merged together O intervalo de células a serem unidas - + The type of 3D points produced by this grid object O tipo de pontos 3D produzidos por este objeto grelha - + The total width of this grid A largura total desta grelha - + The total height of this grid A altura total desta grelha - + Creates automatic column divisions (set to 0 to disable) Cria divisões de colunas automaticamente (coloque 0 para desativar) - + Creates automatic row divisions (set to 0 to disable) Cria divisões de linhas automaticamente (coloque 0 para desativar) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Quando estiver em modo Ponto médio, se esta grelha deve alinhar seus objetos nas arestas ou não - + The indices of faces to hide Os índices das faces que devem ser escondidas @@ -4216,12 +4216,12 @@ Criação de Piso (andar) abortada. Arch_MergeWalls - + Merge Walls Unir paredes - + Merges the selected walls, if possible Une as paredes selecionadas, se possível @@ -4596,12 +4596,12 @@ Criação de Piso (andar) abortada. Arch_Wall - + Wall Parede - + Creates a wall object from scratch or from a selected object (wire, face or solid) Cria um novo objeto de parede ou um a partir de um objeto selecionado (traço, face ou sólido) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Gravar a posição da câmara diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 7ad0659b0b..49613f94d4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -949,32 +949,32 @@ Dacă este true, elementul este aliniat cu axele - + The length of this wall. Not used if this wall is based on an underlying object Lungimea acestui perete. Nu se folosește dacă acest perete este bazat pe un obiect subadiacent - + The width of this wall. Not used if this wall is based on a face Lățimea acestui perete. Nu se folosește dacă acest perete este bazat pe o față - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Înălțimea acestui zid. Setează la 0 pentru valoare automată. Nu este folosită dacă acest perete se bazează pe un solid - + The alignment of this wall on its base object, if applicable Alinierea de acest zid pe obiectul său de bază, dacă este cazul - + The face number of the base object used to build this wall Numărul feței obiectului de bază folosit la construirea acestui perete - + The offset between this wall and its baseline (only for left and right alignments) Decalajul între acest perete şi linia sa de bază (numai pentru aliniamente stânga şi la dreapta) @@ -1054,7 +1054,7 @@ Le chevauchement des poutres au-dessus du bas des semelles - + The number of the wire that defines the hole. A value of 0 means automatic Numărul de fire care defineşte gaura. O valoare 0 înseamnă automat @@ -1074,7 +1074,7 @@ O transformare aplicabile pentru fiecare eticheta - + The axes this system is made of Axele pe care acest sistem este constituit @@ -1204,7 +1204,7 @@ Dimensiunea fontului - + The placement of this axis system Plasarea acestui sistem de axe @@ -1224,57 +1224,57 @@ Lățimea liniei acestui obiect - + An optional unit to express levels O unitate opţională pentru a exprima nivelele - + A transformation to apply to the level mark O transformare aplicabilă pentru fiecare etichetă de nivel - + If true, show the level Dacă este adevărat, Arată nivelul - + If true, show the unit on the level tag Dacă este adevărat, arată unitatea pe tag-ul de nivel - + If true, when activated, the working plane will automatically adapt to this level Dacă este adevărat, atunci când este activată, planul de lucru va adapta automat la acest nivel - + The font to be used for texts Fontul de utilizat pentru texte - + The font size of texts Dimensiunea fontului de texte - + Camera position data associated with this object Datele despre poziția camerei asociate cu acest obiect - + If set, the view stored in this object will be restored on double-click Dacă este activat, vizualizarea înregistrată în acest obiect va fi restaurată printr-un dublu click - + The individual face colors Culorile fațetelor individuale - + If set to True, the working plane will be kept on Auto mode Dacă este setat la True, planul de lucru va fi păstrat pe modul Auto @@ -1419,42 +1419,42 @@ Direcţia scării după odihnă - + Enable this to make the wall generate blocks Permiteți-i să facă pereți din blocuri generate - + The length of each block Lungimea fiecărui bloc - + The height of each block Înălţimea fiecărui bloc - + The horizontal offset of the first line of blocks Deplasare orizontală pentru prima linie de blocuri - + The horizontal offset of the second line of blocks Deplasare orizontală pentru a doua linie de blocuri - + The size of the joints between each block Dimensiunea rosturilor dintre blocuri - + The number of entire blocks Numărul tuturor blocurilor - + The number of broken blocks Numărul de blocuri sparte @@ -1604,27 +1604,27 @@ Grosimea proeminențelor - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Dacă Adevărat, toate obeictele conținute în această Piesă de Construcție vor adopta acesti parametri de linie, culoare și transparență - + The line width of child objects Lățimea liniei acestor obiecte copil - + The line color of child objects Culoarea liniei acestor obiecte copil - + The shape color of child objects Culoarea formelor acestor obiecte copil - + The transparency of child objects Transparenţa acestor obiecte copil @@ -1644,37 +1644,37 @@ Această caracteristică stochează o reprezentare a inventarului pentru acest obiect - + If true, display offset will affect the origin mark too Dacă e validă și activată, display offset va afecta și marcajul originii - + If true, the object's label is displayed Dacă este adevărat, eticheta obiectului este afișată - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Dacă e activată, reprezentarea inventorului pentru acest obiect va fi salvată în fișierul FreeCAD, permițând trimiteri la alte fişiere, în modul uşor. - + A slot to save the inventor representation of this object, if enabled Un slot pentru a salva reprezentarea inventorului acestui obiect, dacă este activat - + Cut the view above this level Taie vizualizarea deasupra acestui nivel - + The distance between the level plane and the cut line Distanța dintre planul de nivel și linia nodurilor de tăiere - + Turn cutting on when activating this level Activați tăierea când activați acest nivel @@ -1869,22 +1869,22 @@ Cum să desenezi tijele - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Acest atribut suprascrie lățimea fiecărui segment de perete. Este ignorat dacă obiectul-bază conține informații despre lățime, prin metoda specificăLățime(). (Prima valoare suprascrie atributul "lățime" pentru primul segment al zidului; dacă valoarea e zero, prima valoare a variabilei "SuprascrieLățime" e utilizată - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Componente @@ -2057,7 +2057,7 @@ Componente ale acestui obiect - + Axes Axe @@ -2067,27 +2067,27 @@ Creați axa - + Remove Elimină - + Add Adaugă - + Axis Axele - + Distance Distance - + Angle Unghi @@ -2197,7 +2197,7 @@ Crează structură - + Create Wall Crează perete @@ -2222,42 +2222,42 @@ Creare fereastră - + Edit Editare - + Create/update component Crează/actualizează componentul - + Base 2D object Obiectul 2D de bază - + Wires Polilinii - + Create new component Crează component nou - + Name Nume - + Type Tip - + Thickness Grosime @@ -2332,22 +2332,22 @@ Nu s-a putut calcula o formă - + Merge Wall Perete îmbinat - + Please select only wall objects Selectați numai obiectele perete - + Merge Walls Pereți îmbinați - + Distances (mm) and angles (deg) between axes Distanţele (mm) şi unghiurile (grade) între axe @@ -2799,22 +2799,22 @@ Ușă - + Hinge Balama - + Opening mode Modul de deschidere - + Get selected edge Obține marginea sélectionnată - + Press to retrieve the selected edge Apăsaţi pentru a prelua marginea selectate @@ -2844,17 +2844,17 @@ Strat nou - + Wall Presets... Presetările de perete... - + Hole wire Gaura de fir - + Pick selected Choix sélectionné @@ -2869,67 +2869,67 @@ Crează Grid - + Label Etichetă - + Axis system components Componente de sistem de axe - + Grid Grilă - + Total width Latime totala - + Total height Înălţime totală - + Add row Adaugă Rând - + Del row Ștergel rând - + Add col Adauga coloană - + Del col Ștergel coloană - + Create span Crează un Espace - + Remove span Supprimer l'espace - + Rows Rânduri - + Columns Coloane @@ -2944,12 +2944,12 @@ Limites de l’espace - + Error: Unable to modify the base object of this wall Erreur : Impossible de modifier l’objet base de ce mur - + Window elements Élémente ale ferestrei @@ -3014,22 +3014,22 @@ Te rog selecteaza macar o axă - + Auto height is larger than height Înălţimea generată automat este mai mare decât înălţimea - + Total row size is larger than height Dimensiunea total a rândului este mai mare decât înălţimea - + Auto width is larger than width Lăţimea generată automat este mai mare decât lăţimea - + Total column size is larger than width Dimensiune totală a coloanei este mai mare decât lăţimea @@ -3244,7 +3244,7 @@ Redimensionați - + Center Centru @@ -3279,12 +3279,12 @@ Intersecţie găsită. - + The selected wall contains no subwall to merge Peretele selectat nu conține pereți auxiliari pentru îmbinat - + Cannot compute blocks for wall Nu se pot calcula blocurile pentru perete @@ -3294,27 +3294,27 @@ Alege o față pe un obiect existent sau selectaţi o presetare - + Unable to create component Imposibil de creat componentul - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numărul de fire care defineşte o gaură în obiectul gazdă. O valoare de zero va adopta automat firul mai mare - + + default + implicit - + If this is checked, the default Frame value of this window will be added to the value entered here În cazul în care acest lucru este bifat, valoarea Cadrului implicit pt această fereastră va fi adăugată la valoarea introdusă aici - + If this is checked, the default Offset value of this window will be added to the value entered here În cazul în care acest lucru este bifat, valoarea implicită Offset pt această fereastră va fi adăugată la valoarea introdusă aici @@ -3469,37 +3469,37 @@ Con&tinuare - + First point of wall Primul punct al zidului - + Wall options Opţiuni pentru perete - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Această listă prezintă obiectele MultiMaterial din documentul acesta. Creați liste petnru a defini tipurile zidurilor. - + Alignment Aliniament - + Left Stanga - + Right Dreapta - + Use sketches Utilizarea schite @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Perete - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Instrumente de axa @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Numărul de rânduri - + The number of columns Numărul de coloane - + The sizes for rows Dimensiunile pentru rânduri - + The sizes of columns Dimensiuni pentru coloane - + The span ranges of cells that are merged together Spațiere intervalelor celulelor care sunt concatenate - + The type of 3D points produced by this grid object Tipul de puncte 3D produse de acest obiect grilă - + The total width of this grid Lățimea totală a acestei grile - + The total height of this grid Înălțimea totală a acestei grile - + Creates automatic column divisions (set to 0 to disable) Creați coloane în mod automat (valoare 0 pour a dezactiva) - + Creates automatic row divisions (set to 0 to disable) Creați în mod automat divizarea rândurilor ( valoarea 0 pentru dezactivare) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Atunci când în modul midpoint edge, în cazul în care această grilă trebuie să reorienteze copii sa de-a lungul perpedincularelor sau nu - + The indices of faces to hide Indicii de față poligon de ascuns @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Pereți îmbinați - + Merges the selected walls, if possible Îmbină zidurile selectate, dacă este posibil @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Perete - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creează un obiect perete de la zero sau dintr-un obiect selectat (sârmă, fata sau solid) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Scrie poziţia camerei diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index e39ca4b469..708c55f017 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -949,32 +949,32 @@ Если истина, элемент выравнивается по осям - + The length of this wall. Not used if this wall is based on an underlying object Длина стены. Не используется, если стена основана на базовом объекте - + The width of this wall. Not used if this wall is based on a face Ширина стены. Не используется, если эта стена основана на грани - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Высота стены. Задайте 0 для автоматического определения. Не используется, если стена основана на твердотельном объекте - + The alignment of this wall on its base object, if applicable Выравнивание стены по базовому объекту, если возможно - + The face number of the base object used to build this wall Число граней базового объекта, используемого для построения стены - + The offset between this wall and its baseline (only for left and right alignments) Смещение между стеной и её базовой линией (только для левого и правого выравнивания) @@ -1054,7 +1054,7 @@ Перекрытие тетив над нижней частью проступей - + The number of the wire that defines the hole. A value of 0 means automatic Количество ломанных линий, определяющих отверстие. Значение 0 означает автоматическое определение @@ -1074,7 +1074,7 @@ Преобразование, применяемое к каждой метке - + The axes this system is made of Оси, составляющие эту систему @@ -1204,7 +1204,7 @@ Размер шрифта - + The placement of this axis system Размещение этой системы осей @@ -1224,57 +1224,57 @@ Ширина линий этого объекта - + An optional unit to express levels Необязательная единица измерения для описания этажей - + A transformation to apply to the level mark Преобразование, применяемое к этажу - + If true, show the level Показать этаж, если истина - + If true, show the unit on the level tag Показать единицы измерения этажа если истина - + If true, when activated, the working plane will automatically adapt to this level Если истина при активации рабочая плоскость автоматически адаптируется к этому этажу - + The font to be used for texts Шрифт, используемый для текста - + The font size of texts Размер шрифта для текста - + Camera position data associated with this object Данные позиции камеры, связанные с этим объектом - + If set, the view stored in this object will be restored on double-click Если отмечена, вид, сохраненный в этом объекте, будет восстановлен по двойному щелчку мышью - + The individual face colors Разные цвета граней - + If set to True, the working plane will be kept on Auto mode Если задано значение True, рабочая плоскость будет находится в автоматическом режиме @@ -1419,42 +1419,42 @@ Направление полета после посадки - + Enable this to make the wall generate blocks Включите это чтобы генерировать блоки стены - + The length of each block Длина каждого блока - + The height of each block Высота каждого блока - + The horizontal offset of the first line of blocks Горизонтальное смещение первой линии блоков - + The horizontal offset of the second line of blocks Горизонтальное смещение второй линии блоков - + The size of the joints between each block Размер соединения между каждым блоком - + The number of entire blocks Число полных блоков - + The number of broken blocks Количество неполных блоков @@ -1604,27 +1604,27 @@ Толщина стержней - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Если значение истинно, то объекты, содержащиеся в этой части здания, будут принимать параметры линии: цвет и прозрачность - + The line width of child objects Ширина линии дочерних объектов - + The line color of child objects Цвет линии дочерних объектов - + The shape color of child objects Цвет формы дочерних объектов - + The transparency of child objects Прозрачность дочерних объектов @@ -1644,37 +1644,37 @@ Это свойство хранит представление inventor для данного объекта - + If true, display offset will affect the origin mark too Если верно, то отображение смещения также повлияет на нулевую координату - + If true, the object's label is displayed Если установлено значение true, отображается метка объекта - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Если это включено, то представление этого объекта в инвентаре будет сохранено в файле FreeCAD, позволяя ссылаться на него в других файлах в легком режиме. - + A slot to save the inventor representation of this object, if enabled Ячейка для сохранения в инвентаре представления этого объекта, если включено - + Cut the view above this level Вырезать вид выше этого уровня - + The distance between the level plane and the cut line Расстояние между плоскостью уровня и линией разреза - + Turn cutting on when activating this level Включить резку при активации этого уровня @@ -1869,22 +1869,22 @@ Как отображать бабки - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Переопределяет ширину каждого сегмента стены. Игнорируется, если базовый объект проставляет информацию о ширине методом getWidths(). (Первое значение переопределяет ширину первого сегмента стены; Если значение 0, первое значение переопределенной ширины будет следующим) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Переопределяет выравнивание каждого сегмента стены. Игнорируется, если базовый объект проставляет информацию о выравнивании методом getAligns(). (Первое значение переопределяет выравнивание первого сегмента стены; Если значение не равно слева, справа, по центру, то первое значение переопределенного выравнивания будет следующим) - + The area of this wall as a simple Height * Length calculation Площадь этой стены в виде простого расчёта Высота * Длина - + If True, double-clicking this object in the tree activates it Если Истина, то двойной щелчок по объекту в дереве объектов сделает его активным @@ -2047,7 +2047,7 @@ Arch - + Components Компоненты @@ -2057,7 +2057,7 @@ Компоненты этого объекта - + Axes Оси @@ -2067,27 +2067,27 @@ Создать координатную ось - + Remove Удалить - + Add Добавить - + Axis Ось - + Distance Расстояние - + Angle Угол @@ -2197,7 +2197,7 @@ Создать Структуру - + Create Wall Создать Стену @@ -2222,42 +2222,42 @@ Создать Окно - + Edit Редактировать - + Create/update component Создать/обновить компонент - + Base 2D object Базовый 2D-объект - + Wires Ломанные линии - + Create new component Создать новый компонент - + Name Название - + Type Тип - + Thickness Толщина @@ -2332,22 +2332,22 @@ Не могу рассчитать фигуру - + Merge Wall Объединить Стену - + Please select only wall objects Пожалуйста, выберите только объекты стен - + Merge Walls Объединить Стены - + Distances (mm) and angles (deg) between axes Расстояния (мм) и углы (градусы) между осями @@ -2799,22 +2799,22 @@ Дверь - + Hinge Петля - + Opening mode Способ открытия - + Get selected edge Получить выбранное ребро - + Press to retrieve the selected edge Нажмите, чтобы получить выбранное ребро @@ -2844,17 +2844,17 @@ Новый слой - + Wall Presets... Преднастройки стен... - + Hole wire Ломанная линия отверстия - + Pick selected Указать выбранное @@ -2869,67 +2869,67 @@ Создать Сетку - + Label Метка - + Axis system components Компоненты системы координат - + Grid Сетка - + Total width Общая ширина - + Total height Общая высота - + Add row Добавить строку - + Del row Удалить строку - + Add col Добавить колонку - + Del col Удалить колонку - + Create span Создать промежуток - + Remove span Удалить промежуток - + Rows Строки - + Columns Столбцы @@ -2944,12 +2944,12 @@ Границы зоны - + Error: Unable to modify the base object of this wall Ошибка: Не удается изменить базовый объект этой стены - + Window elements Элементы окна @@ -3014,22 +3014,22 @@ Пожалуйста, выберите по крайней мере одну ось - + Auto height is larger than height Автоматическая высота больше, чем пользовательская - + Total row size is larger than height Общий размер строки больше высоты - + Auto width is larger than width Автоматическая ширина больше, чем пользовательская - + Total column size is larger than width Общий размер столбца больше высоты @@ -3244,7 +3244,7 @@ Изменить размер - + Center Центр @@ -3279,12 +3279,12 @@ Пересечение найдено. - + The selected wall contains no subwall to merge Выбранная стена не содержит внутренних стен для слияния - + Cannot compute blocks for wall Не удается вычислить блоки для стен @@ -3294,27 +3294,27 @@ Выберите грань на существующем объекте или выберите преднастройку - + Unable to create component Невозможно создать компонент - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Количество ломанных линий, определяющих отверстие в исходном объекте. Ноль автоматически задаёт наибольшее значение - + + default + значения по умолчанию - + If this is checked, the default Frame value of this window will be added to the value entered here Если этот флажок установлен, для данного окна будут добавлены значения рамы по умолчанию к введенному здесь значению - + If this is checked, the default Offset value of this window will be added to the value entered here Если этот флажок установлен, для данного окна будут добавлены значения смещения по умолчанию к введенному здесь значению @@ -3469,37 +3469,37 @@ &Продолжить - + First point of wall Первая точка стены - + Wall options Параметры стены - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Этот список показывает все объекты MultiMaterials этого документа. Создайте некоторые для определения типов стен. - + Alignment Выравнивание - + Left Слева - + Right Справа - + Use sketches Использование эскизов @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Стена - + This window has no defined opening Это окно не имеет определенного открытия - + Invert opening direction Инвертировать направление открытия - + Invert hinge position Инвертировать положение петель @@ -3942,7 +3942,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Инстументы осей @@ -4116,62 +4116,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Количество строк - + The number of columns Количество столбцов - + The sizes for rows Размеры строк - + The sizes of columns Размеры столбцов - + The span ranges of cells that are merged together Диапазоны промежутка ячеек, которые объединяются вместе - + The type of 3D points produced by this grid object Тип 3D-точек, созданных объектом сетки - + The total width of this grid Общая ширина сетки - + The total height of this grid Общая высота сетки - + Creates automatic column divisions (set to 0 to disable) Создаёт автоматические подразделения столбцов (задайте 0 для отключения) - + Creates automatic row divisions (set to 0 to disable) Создаёт автоматические подразделения строк (задайте 0 для отключения) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not В режиме серединной точки ребра. Должна ли сетка переориентировать свои дочерние элементы вдоль нормалей ребра или нет - + The indices of faces to hide Индексы граней для скрытия @@ -4213,12 +4213,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Объединить Стены - + Merges the selected walls, if possible Объединяет выбранные стены, если это возможно @@ -4593,12 +4593,12 @@ Floor creation aborted. Arch_Wall - + Wall Стена - + Creates a wall object from scratch or from a selected object (wire, face or solid) Создаёт новый объект стены с нуля или на основе выбранного объекта (ломаной линии, грани или твердотельного объекта) @@ -4922,7 +4922,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Записать позицию камеры diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.ts b/src/Mod/Arch/Resources/translations/Arch_sk.ts index 7f1a997ef5..b96913a5ad 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sk.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it Ak Pravda, dvojklik na tento objekt v strome ho aktivuje @@ -2047,7 +2047,7 @@ Arch - + Components Komponenty @@ -2057,7 +2057,7 @@ Komponenty tohoto objektu - + Axes Osi @@ -2067,27 +2067,27 @@ Vytvoriť os - + Remove Odstrániť - + Add Pridať - + Axis Os - + Distance Vzdialenosť - + Angle Uhol @@ -2197,7 +2197,7 @@ Vytvor štruktúru - + Create Wall Vytvoriť stenu @@ -2222,42 +2222,42 @@ Vytvoriť okno - + Edit Upraviť - + Create/update component Create/update component - + Base 2D object Základný 2D objekt - + Wires Wires - + Create new component Create new component - + Name Názov - + Type Typ - + Thickness Thickness @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall Merge Wall - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2799,22 +2799,22 @@ Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Mriežka - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center Stred @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Vľavo - + Right Vpravo - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Stena - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Stena - + Creates a wall object from scratch or from a selected object (wire, face or solid) Vytvorí objekt steny, od nuly alebo z vybratého objektu (drôtov, plochy alebo pevného) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 6ecbd896ec..0c304b84a7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -949,32 +949,32 @@ Če je True so elementi poravnani z osjo - + The length of this wall. Not used if this wall is based on an underlying object Dolžina zidu. Ni uporabljena v primeru, ko je zid osnovan na spodnjem objektu - + The width of this wall. Not used if this wall is based on a face Širina zidu. Ni upoštevana, če je zid na osnovni ploskvi - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Višina zidu. Pusititi 0 za samodejno. Ni upoštevana v primeru, ko je zid na osnovi telesa - + The alignment of this wall on its base object, if applicable Poravnanva zidu na osnovni objekt, kjer je to možno - + The face number of the base object used to build this wall Število ploskev osnovnega predmeta, ki so uporabljene za izgradnjo stene - + The offset between this wall and its baseline (only for left and right alignments) Odmik med steno in osnovnico (le za poravnave levo in desno) @@ -1054,7 +1054,7 @@ Seganje nosilca preko nastopne ploskve - + The number of the wire that defines the hole. A value of 0 means automatic Številka črtovja, ki določa preboj. Vrednost 0 pomeni samodejno @@ -1074,7 +1074,7 @@ Preoblikovanje uveljaviti na vsaki oznaki - + The axes this system is made of Osi iz katerih je sestav narejen @@ -1204,7 +1204,7 @@ Velikost pisave - + The placement of this axis system Umestitev sestava osi @@ -1224,57 +1224,57 @@ Debelina črt tega predmeta - + An optional unit to express levels Nadomestna nota za ravni - + A transformation to apply to the level mark Uveljavitev preoblikovanja oznake ravni - + If true, show the level Če drži, prikaži raven - + If true, show the unit on the level tag Če drži, prikaži enoto na oznaki ravni - + If true, when activated, the working plane will automatically adapt to this level Če drži, se bo delavna ravnina ob omogočitvi samodejno prilagodila tej ravni - + The font to be used for texts Pisava za besedila - + The font size of texts Velikost pisave za besedila - + Camera position data associated with this object Podatki o položaju kamere vezani na ta predmet - + If set, the view stored in this object will be restored on double-click Če je nastavljen, se ob dvokliku obnovi pogled, shranjen v tem predmetu - + The individual face colors Barve posamičnih ploskev - + If set to True, the working plane will be kept on Auto mode Če je nastavjeno na Drži, bo delavna ravnina ostala v samodejnem načinu @@ -1419,42 +1419,42 @@ Smer rame po podestu - + Enable this to make the wall generate blocks Omogočite, če želite, da se z zidom izrešejo zidaki - + The length of each block Dolžina posameznega zidaka - + The height of each block Širina posameznega zidaka - + The horizontal offset of the first line of blocks Vodoravni odmik prve vrste zidakov - + The horizontal offset of the second line of blocks Vodoravni odmik druge vrste zidakov - + The size of the joints between each block Velikost reže med zidakoma - + The number of entire blocks Število vseh zidakov - + The number of broken blocks Število rezanih zidakov @@ -1604,27 +1604,27 @@ Debelina čelnice - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Če drži, prikaži predmete, zajete v tej stavbi, ki bodo prevzeli te nastavitve črte, barve in prozornosti - + The line width of child objects Debelina črte podrejenega predmeta - + The line color of child objects Barva črte podrejenega predmeta - + The shape color of child objects Barva oblike podrejenega predmeta - + The transparency of child objects Prozornost podrejenega predmeta @@ -1644,37 +1644,37 @@ Ta lastnost srani inventorjevo predstavitev tega predmeta - + If true, display offset will affect the origin mark too Če drži, bo odmik prikazovalnika vplival tudi na oznako izhodišča - + If true, the object's label is displayed Če drži, bo prikazana označba predmeta - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Če je to omogočeno, bo inventorjeva predstavitev tega predmeta shranjena v datoteko FreeCAD, s čimer bo omogočeno sklicevanje nanj iz drugih datotek v lahkem načinu. - + A slot to save the inventor representation of this object, if enabled Mesto za shranjevanje predstavitve Inventor tega predmeta, če je mogoče - + Cut the view above this level Prereži pogled nad to ravnjo - + The distance between the level plane and the cut line Razdalja med ravnino ravni in rezalni črto - + Turn cutting on when activating this level Pri uporabi te ravni vključi rezanje @@ -1869,22 +1869,22 @@ Kako se nariše palice - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) To povozi značilko širine z nastavitvijo širine vsakega posameznega odseka stene. Prezre se, če so podatki pridobljeni že iz osnovnega predmeta s postopkom getWidths(). (1. vrednost povozi značilko "Širina" prvega odseka stene; če je vrednost enaka nič, sledi prva naslednja vednost iz "OverrideWidth") - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) To povozi značilko poravnave z nastavitvijo poravnave vsakega posameznega odseka stene. Prezre se, če so podatki pridobljeni že iz osnovnega predmeta s postopkom getAligns(). (1. vrednost povozi značilko "Poravnava" prvega odseka stene; če vrednost ni "Levo, Desno, Sredinsko", sledi prva vednost iz "OverrideAlign") - + The area of this wall as a simple Height * Length calculation Površina te stene kot enostaven zmnožek višine in dolžine - + If True, double-clicking this object in the tree activates it Če drži, z dvoklikom na predmet v drevesu ta postane označen @@ -2047,7 +2047,7 @@ Arch - + Components Sestavine @@ -2057,7 +2057,7 @@ Komponente tega predmeta - + Axes Osi @@ -2067,27 +2067,27 @@ Ustvari os - + Remove Odstrani - + Add Dodaj - + Axis Os - + Distance Distance - + Angle Kot @@ -2197,7 +2197,7 @@ Ustvari konstrukcijo - + Create Wall Ustvari zid @@ -2222,42 +2222,42 @@ Ustvari okno - + Edit Uredi - + Create/update component Ustvari/posodobi komponento - + Base 2D object Izhodiščni 2D predmet - + Wires Črtovja - + Create new component Ustvari novo komponento - + Name Ime - + Type Vrsta - + Thickness Debelina @@ -2332,22 +2332,22 @@ Ni bilo možno izračunati oblike - + Merge Wall Združi steno - + Please select only wall objects Izberite le stene - + Merge Walls Združi stene - + Distances (mm) and angles (deg) between axes Razdalje (mm) in koti (°) med osmi @@ -2799,22 +2799,22 @@ Vrata - + Hinge Tečaj - + Opening mode Način odpiranja - + Get selected edge Dobi izbrani rob - + Press to retrieve the selected edge Pritisnite da povrnete izbrani rob @@ -2844,17 +2844,17 @@ Nova plast - + Wall Presets... Prednastavitve stene ... - + Hole wire Črtovje preboja - + Pick selected Izberi označeno @@ -2869,67 +2869,67 @@ Ustvari mrežo - + Label Oznaka - + Axis system components Sestavine sestava osi - + Grid Mreža - + Total width Celotna širina - + Total height Celotna višina - + Add row Dodaj vrstico - + Del row Izbriši vrtico - + Add col Dodaj stolpec - + Del col Izbriši stolpec - + Create span Ustvari razpon - + Remove span Odstrani razpon - + Rows Vrstice - + Columns Stolpci @@ -2944,12 +2944,12 @@ Meje prostora - + Error: Unable to modify the base object of this wall Napaka: preoblikovanje tlorisa tega zidu ni mogoče - + Window elements Deli oken @@ -3014,22 +3014,22 @@ Izberite vsaj eno os - + Auto height is larger than height Samodejna višina je večja od nastavljene - + Total row size is larger than height Skupna velikost vrstice je večja od višine - + Auto width is larger than width Samodejna širina je večja od nastavljene - + Total column size is larger than width Skupna velikost stolpca presega širino @@ -3244,7 +3244,7 @@ Spremeni velikost - + Center Središče @@ -3279,12 +3279,12 @@ Presečišče najdeno. - + The selected wall contains no subwall to merge Izbrani zid ne vsebuje pod-zidov za združitev - + Cannot compute blocks for wall Ni mogoče izračunavati zidakov za steno @@ -3294,27 +3294,27 @@ Izberite ploskev ne obstoječem predmetu ali izberite prednastavitev - + Unable to create component Sestavine ni mogoče ustvariti - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Številka črtovja, ki določa preboj v gostuječem predmetu. Pri vrednosti nič bo samodejno upoštevan najskrajšnejše črtovje - + + default + privzeto - + If this is checked, the default Frame value of this window will be added to the value entered here Če je to označeno, bo privzeta vrednost okvirja tega okna dodana vrednosti, vnešeni tukaj - + If this is checked, the default Offset value of this window will be added to the value entered here Če je to označeno, bo privzeta vrednost odmika tega okna dodana vrednosti, vnešeni tukaj @@ -3469,37 +3469,37 @@ &Nadaljuj - + First point of wall Prva točka stene - + Wall options Možnosti stene - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Ta seznam prikazuje vse sestavljene materiale v tem dokumentu. Ustvarite nove za vaše vrste sten. - + Alignment Poravnava - + Left Levo - + Right Desno - + Use sketches Uporabi očrte @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Stena - + This window has no defined opening To okno nima določenega odpiranja - + Invert opening direction Obrni smer odpiranja - + Invert hinge position Obrni položaj tečajev @@ -3943,7 +3943,7 @@ Ustvarjanje etaže prekinjeno. Arch_AxisTools - + Axis tools Osna orodja @@ -4117,62 +4117,62 @@ Ustvarjanje etaže prekinjeno. Arch_Grid - + The number of rows Število vrstic - + The number of columns Število stolpcev - + The sizes for rows Velikost vrstic - + The sizes of columns Velikost stolpcev - + The span ranges of cells that are merged together Razpon polij, ki se združijo - + The type of 3D points produced by this grid object Vrsta 3D točk, ki jih ustvari mreža - + The total width of this grid Celotna širina mreže - + The total height of this grid Celotna višina mreže - + Creates automatic column divisions (set to 0 to disable) Samodejno ustvari delitve stolpca (onemogočite z nastavitvijo na 0) - + Creates automatic row divisions (set to 0 to disable) Samodejno ustvari delitve vrstice (onemogočite z nastavitvijo na 0) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Ko ste v načinu "razpoločišče roba", mora ta mreža preusmeriti podrejenike vzdolž normale roba ali ne - + The indices of faces to hide Indeksi ploskev katere se skrije @@ -4214,12 +4214,12 @@ Ustvarjanje etaže prekinjeno. Arch_MergeWalls - + Merge Walls Združi stene - + Merges the selected walls, if possible Združi izbrane zidove, če je mogoče @@ -4594,12 +4594,12 @@ Ustvarjanje etaže prekinjeno. Arch_Wall - + Wall Stena - + Creates a wall object from scratch or from a selected object (wire, face or solid) Ustvari predmet stene od začetka ali iz izbranega predmeta (očrta, črtovja, ploskve ali telesa) @@ -4923,7 +4923,7 @@ Pustite prazno, če želite uporabiti vse predmete v dokumentu Draft - + Writing camera position Zapisovanje položaja kamere diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 72d59592b7..a75bfae7c1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -949,32 +949,32 @@ If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of The axes this system is made of @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Компоненте @@ -2057,7 +2057,7 @@ Компоненте овог објекта - + Axes Осе @@ -2067,27 +2067,27 @@ Креирај осу - + Remove Obriši - + Add Додај - + Axis Оса - + Distance Distance - + Angle Угао @@ -2197,7 +2197,7 @@ Направи структуру - + Create Wall Направи зид @@ -2222,42 +2222,42 @@ Креирај прозор - + Edit Измени - + Create/update component Креирај / Ажурирај компоненту - + Base 2D object Базни 2D објекат - + Wires Жице - + Create new component Направи нову компоненту - + Name Име - + Type Тип - + Thickness Дебљина @@ -2332,22 +2332,22 @@ Ниcам уcпео прорачунати облик - + Merge Wall Cпоји Зид - + Please select only wall objects Молим одаберите cамо зидове - + Merge Walls Cпоји Зидове - + Distances (mm) and angles (deg) between axes Раздаљине (mm) и углови (deg) између оcа @@ -2800,22 +2800,22 @@ Door - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2845,17 +2845,17 @@ New layer - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2870,67 +2870,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid Мрежа - + Total width Total width - + Total height Total height - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2945,12 +2945,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3015,22 +3015,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3245,7 +3245,7 @@ Resize - + Center По средини @@ -3280,12 +3280,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3295,27 +3295,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3470,37 +3470,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Лево - + Right Деcно - + Use sketches Use sketches @@ -3680,17 +3680,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Зид - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3946,7 +3946,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4120,62 +4120,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4217,12 +4217,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Cпоји Зидове - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -4597,12 +4597,12 @@ Floor creation aborted. Arch_Wall - + Wall Зид - + Creates a wall object from scratch or from a selected object (wire, face or solid) Прави зид објекта од почетка или од одабраног објекта (жице, површине или тела) @@ -4926,7 +4926,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index e56a56ed86..be58c43cc2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -949,32 +949,32 @@ Om detta är sant justeras elementet till axlar - + The length of this wall. Not used if this wall is based on an underlying object Längden på denna vägg. Används ej om denna vägg baseras på underliggande objekt - + The width of this wall. Not used if this wall is based on a face Tjockleken på denna vägg. Används inte om denna vägg är baserad på en yta - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Höjden på denna vägg. Behåll på 0 för automatisk höjd. Används ej om denna vägg är baserad på en solid - + The alignment of this wall on its base object, if applicable Justeringen för denna vägg i förhållande till dess basobjekt, om applicerbart - + The face number of the base object used to build this wall Ytnumret i basobjektet som användes för att skapa denna vägg - + The offset between this wall and its baseline (only for left and right alignments) Förskjutningen mellan denna vägg och dess baslinje (endast för vänster- och högerjusteringar) @@ -1054,7 +1054,7 @@ Överskjut för vangstyckena över botten på planstegen - + The number of the wire that defines the hole. A value of 0 means automatic Nummer på tråden som definierar hålet. Värdet 0 anger automatisk beräkning @@ -1074,7 +1074,7 @@ En omvandling att applicera på varje etikett - + The axes this system is made of Axlarna detta system är skapat av @@ -1204,7 +1204,7 @@ Teckenstorleken - + The placement of this axis system Placeringen av detta axelsystem @@ -1224,57 +1224,57 @@ Linjetjockleken för detta objekt - + An optional unit to express levels En valfri enhet för att uttrycka våningar - + A transformation to apply to the level mark En omvandling att applicera på våningsmarkeringen - + If true, show the level Om detta är sant visas våningen - + If true, show the unit on the level tag Om detta är sant visas enheten på våningsetiketten - + If true, when activated, the working plane will automatically adapt to this level Om detta är sant kommer arbetsplanet när det är aktiverat att automatiskt anpassas till denna våning - + The font to be used for texts Teckensnittet att använda för texter - + The font size of texts Teckenstorleken för texter - + Camera position data associated with this object Kamera-positionsdata associerad med detta objekt - + If set, the view stored in this object will be restored on double-click Om detta är ikryssat kommer den sparade vyn i detta objekt återställas med dubbelklick - + The individual face colors De individuella ytfärgerna - + If set to True, the working plane will be kept on Auto mode Om detta är sant, kommer arbetsplanet hållas i auto-läge @@ -1419,42 +1419,42 @@ Riktningen för utgången av trappan - + Enable this to make the wall generate blocks Aktivera detta för att väggen ska generera block - + The length of each block Längden på varje block - + The height of each block Höjden på varje block - + The horizontal offset of the first line of blocks Den horisontella förskjutningen av den första blockraden - + The horizontal offset of the second line of blocks Den horisontella förskjutningen av den andra blockraden - + The size of the joints between each block Storleken på blockförbindelserna - + The number of entire blocks Antalet hela block - + The number of broken blocks Antalet trasiga block @@ -1604,27 +1604,27 @@ Tjockleken på sättstegen - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Om sant, kommer objekten i denna byggdel kommer att anta dessa linje-, färg- och transparensinställningar - + The line width of child objects Linjetjockleken för underobjekt - + The line color of child objects Linjefärgen för underobjekt - + The shape color of child objects Formfärgen för underobjekt - + The transparency of child objects Transparensen för underobjekt @@ -1644,37 +1644,37 @@ Den här egenskapen lagrar en uppfinnarrepresentation för detta objekt - + If true, display offset will affect the origin mark too Om sant, påverkar visningsförskjutning även origo märket - + If true, the object's label is displayed Om sant, visas objektets etikett - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Om detta är aktiverat kommer inventor representationen av detta objekt att sparas i FreeCAD-filen, vilket tillåter att referera det i andra filer i lättviktsläge. - + A slot to save the inventor representation of this object, if enabled En plats för att spara inventor representationen av detta objekt, om aktiverad - + Cut the view above this level Trimma vyn över denna nivå - + The distance between the level plane and the cut line Avståndet mellan vågrätt plan och skärlinje - + Turn cutting on when activating this level Aktivera trimning när du aktiverar denna nivå @@ -1869,22 +1869,22 @@ Hur man ritar stagen - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Detta åsidosätter bredd-attribut för att ange bredd på varje väggsegment. Detta ignoreras om Basobjekt ger Breddinformation, med getWidths() metoden. (1: a värdet åsidosätter 'Bredd'-attribut för 1: a väggsegmentet; om ett värde är noll, kommer 1: a värdet av 'ÅsidosBredd' att följas) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Detta åsidosätter justerings-attribut för att ange justeringen på varje väggsegment. Detta ignoreras om Basobjekt ger Justeringsinformation, med getAligns() metoden. (1: a värdet åsidosätter 'Align'-attribut för 1: a väggsegmentet; om ett värde inte är 'Vänster, Höger, Center', kommer 1: a värdet av 'OverrideAlign' att följas) - + The area of this wall as a simple Height * Length calculation Denna väggs area som en enkel höjd * Längd beräkning - + If True, double-clicking this object in the tree activates it Om sant, så gör en dubbelklickning på detta objekt i trädet, aktivt @@ -2047,7 +2047,7 @@ Arch - + Components Komponenter @@ -2057,7 +2057,7 @@ Komponenter i det här objektet - + Axes Axlar @@ -2067,27 +2067,27 @@ Skapa axel - + Remove Ta bort - + Add Lägg till - + Axis Axel - + Distance Distans - + Angle Vinkel @@ -2197,7 +2197,7 @@ Skapa struktur - + Create Wall Skapa vägg @@ -2222,42 +2222,42 @@ Skapa fönster - + Edit Redigera - + Create/update component Skapa eller uppdatera komponent - + Base 2D object 2D basobjekt - + Wires Trådar - + Create new component Skapa ny komponent - + Name Namn - + Type Typ - + Thickness Tjocklek @@ -2332,22 +2332,22 @@ En form kunde inte beräknas - + Merge Wall Sammanfoga vägg - + Please select only wall objects Vänligen markera endast väggobjekt - + Merge Walls Sammanfoga väggar - + Distances (mm) and angles (deg) between axes Avstånd (mm) och vinklar (grader) mellan axlar @@ -2799,22 +2799,22 @@ Dörr - + Hinge Gångjärn - + Opening mode Öppningsläge - + Get selected edge Hämta markerad kant - + Press to retrieve the selected edge Tryck för att hämta den markerade kanten @@ -2844,17 +2844,17 @@ Nytt lager - + Wall Presets... Väggförval... - + Hole wire Tråd för hål - + Pick selected Välj markering @@ -2869,67 +2869,67 @@ Skapa rutnät - + Label Etikett - + Axis system components Komponenter för axelsystem - + Grid Rutnät - + Total width Total bredd - + Total height Total höjd - + Add row Lägg till rad - + Del row Ta bort rad - + Add col Lägg till kolumn - + Del col Ta bort kolumn - + Create span Skapa spännvidd - + Remove span Ta bort spännvidd - + Rows Rader - + Columns Kolumner @@ -2944,12 +2944,12 @@ Utrymmesbegränsningar - + Error: Unable to modify the base object of this wall Fel: Kan inte modifiera basobjektet för denna vägg - + Window elements Fönsterelement @@ -3014,22 +3014,22 @@ Vänligen välj minst en axel - + Auto height is larger than height Auto-höjd är större än höjd - + Total row size is larger than height Total radstorlek är större än höjden - + Auto width is larger than width Automatisk bredd är större än bredd - + Total column size is larger than width Total kolumnstorlek är större än bredd @@ -3244,7 +3244,7 @@ Ändra storlek - + Center Centrum @@ -3279,12 +3279,12 @@ Korsning hittad. - + The selected wall contains no subwall to merge Det valda väggen innehåller ingen delvägg att sammanfoga - + Cannot compute blocks for wall Kan inte beräkna block för vägg @@ -3294,27 +3294,27 @@ Välj en yta på ett befintligt objekt eller markera ett förval - + Unable to create component Kan ej skapa komponent - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Antalet trådar som definierar ett hål i värdobjektet. Ett värde på noll kommer automatiskt att anta den största tråden - + + default + standard - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ For&tsättning - + First point of wall Första punkt för vägg - + Wall options Vägginställningar - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Denna lista visar alla objekt med multimaterial i detta dokument. Skapa några för att definiera väggtyper. - + Alignment Justering - + Left Vänster - + Right Höger - + Use sketches Använd skisser @@ -3679,17 +3679,17 @@ Om Kör = 0 beräknas körningen så att höjden är densamma som den relativa p Vägg - + This window has no defined opening Detta fönster har ingen definierad öppning - + Invert opening direction Invertera öppningsriktning - + Invert hinge position Invertera gångjärnsposition @@ -3939,7 +3939,7 @@ Skapande av golv avbruten. Arch_AxisTools - + Axis tools Axelverktyg @@ -4113,62 +4113,62 @@ Skapande av golv avbruten. Arch_Grid - + The number of rows Antalet rader - + The number of columns Antalet kolumner - + The sizes for rows Radstorlekar - + The sizes of columns Kolumnstorlekar - + The span ranges of cells that are merged together Spännvidden av celler som slås samman - + The type of 3D points produced by this grid object Den typ av 3D-punkter som produceras av detta rutnätsobjekt - + The total width of this grid Den totala bredden på detta rutnät - + The total height of this grid Den totala höjden på detta rutnät - + Creates automatic column divisions (set to 0 to disable) Skapar automatiska kolumndelningar (sätt till 0 för att inaktivera) - + Creates automatic row divisions (set to 0 to disable) Skapar automatiska raddelningar (sätt till 0 för att inaktivera) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not När kantens mittpunkt lägeär aktiverat: om detta rutnät måste reorientera sina barn längs kant normaler eller inte - + The indices of faces to hide Indexen av ytor som ska döljas @@ -4210,12 +4210,12 @@ Skapande av golv avbruten. Arch_MergeWalls - + Merge Walls Sammanfoga väggar - + Merges the selected walls, if possible Sammanfogar de markerade väggarna, om möjligt @@ -4590,12 +4590,12 @@ Skapande av golv avbruten. Arch_Wall - + Wall Vägg - + Creates a wall object from scratch or from a selected object (wire, face or solid) Skapar ett väggobjekt från början eller från ett markerat objekt (tråd, yta eller solid) @@ -4919,7 +4919,7 @@ Lämna tomt för att använda alla objekt från dokumentet Draft - + Writing camera position Skriver kamerans position diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index 961f7ab986..6d725a012e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index eff831f862..5f6d562317 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -949,32 +949,32 @@ True ise öğe hizalanır Ateşlerle - + The length of this wall. Not used if this wall is based on an underlying object Bu duvarın uzunluğu. Bu duvar bir alttaki nesne üzerinde dayalıysa kullanılmaz - + The width of this wall. Not used if this wall is based on a face Bu çeper genişliği. Bu çeper bir yüzü temel alıyorsa kullanılamaz - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Çeper yüksekliği. Otomatik ayar için 0 (Sıfır) yapın. Bu çeper bir katıyı temel alıyorsa kullanılamaz - + The alignment of this wall on its base object, if applicable Varsa, bu duvarın taban nesnesindeki hizalaması - + The face number of the base object used to build this wall Bu duvarı oluşturmak için kullanılan temel nesnenin yüz numarası - + The offset between this wall and its baseline (only for left and right alignments) Bu duvar ile taban çizgisi arasındaki uzaklık (yalnızca sol ve sağ hizalamalar için) @@ -1054,7 +1054,7 @@ Yukarıdaki basamakları alt stringers örtüşme - + The number of the wire that defines the hole. A value of 0 means automatic Delik tanımlar tel sayısı. 0 değeri, otomatik anlamına gelir @@ -1074,7 +1074,7 @@ Her etiket için uygulanacak bir dönüşüm - + The axes this system is made of Bu sistem yapilmis eksenleri @@ -1204,7 +1204,7 @@ Metin boyutu - + The placement of this axis system Bu eksen sisteminin yerleşimi @@ -1224,57 +1224,57 @@ Bu nesnenin çizgi genişliği - + An optional unit to express levels Seviyeleri ifade etmek için isteğe bağlı bir birim - + A transformation to apply to the level mark Seviye işaretine uygulanacak bir dönüşüm - + If true, show the level Doğru ise, seviyeyi göster - + If true, show the unit on the level tag Doğru ise, seviye etiketinde birimi göster - + If true, when activated, the working plane will automatically adapt to this level Doğru ise, etkinleştirildiğinde, çalışma düzlemi otomatik olarak bu seviyeye adapte olacaktır - + The font to be used for texts Metinler için kullanılacak yazıtipi - + The font size of texts Metinler için yazıtipi boyutu - + Camera position data associated with this object Bu nesne ile ilişkilendirilmiş kamera konumu verileri - + If set, the view stored in this object will be restored on double-click Ayarlanmışsa, bu nesnede saklanan görünüm çift tıklama ile geri yüklenir - + The individual face colors Bireysel yüzey renkleri - + If set to True, the working plane will be kept on Auto mode Doğru olarak ayarlanmışsa, çalışma düzlemi Otomatik modda tutulacaktır @@ -1419,42 +1419,42 @@ İniş sonrası uçuş yönü - + Enable this to make the wall generate blocks Bloklar oluşturan duvarlar yapabilmek için bunu açın - + The length of each block Her bloğun uzunluğu - + The height of each block Her bloğun yüksekliği - + The horizontal offset of the first line of blocks İlk blok hattının yatay yer değiştirmesi - + The horizontal offset of the second line of blocks İkinci blok hattının yatay yer değiştirmesi - + The size of the joints between each block Her bir blok arasındaki bağlantının boyutu - + The number of entire blocks Sağlam blok sayısı - + The number of broken blocks Bozuk blok sayısı @@ -1604,27 +1604,27 @@ Yükseltici Kalınlığı - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Eğer doğruysa, bu bina bölümünün olduğu nesneleri bu çizgi, renk ve saydamlık ayarlarını kabul ederek göster - + The line width of child objects Alt nesnelerin çizgi genişliği - + The line color of child objects Alt nesnelerin çizgi rengi - + The shape color of child objects Alt nesnelerin renk şekli - + The transparency of child objects Alt nesnelerin şeffaflığı @@ -1644,37 +1644,37 @@ Bu özellik, bu nesne için bir inventor temsilini depolar - + If true, display offset will affect the origin mark too Değer doğruysa, görüntü ofseti başlangıç ​​noktasını da etkiler - + If true, the object's label is displayed Değer doğruysa, nesnenin etiketi görüntülenir - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Bu etkinleştirilirse, bu nesnenin inventor temsili, FreeCAD dosyasına kaydedilir ve hafif moddaki diğer dosyalara başvurulmasına izin verir. - + A slot to save the inventor representation of this object, if enabled Etkinleştirilmişse, bu nesnenin inventor temsilini kaydetmek için bir yuvadır - + Cut the view above this level Görünümü bu seviyenin üzerinden kesin - + The distance between the level plane and the cut line Seviye düzlemi ve kesim çizgisi arasındaki mesafe - + Turn cutting on when activating this level Bu seviyeyi etkinleştirirken kesmeyi aç @@ -1869,22 +1869,22 @@ Çubuklar nasıl çizilir - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Bu, her duvar parçasının genişliğini ayarlamak için Genişlik özelliğini geçersiz kılar. temel nesne getWidths () yöntemiyle Genişlikler bilgisi sağlıyorsa yoksayılır. (1. değer, duvarın 1. segmenti için "Genişlik" özelliğini geçersiz kılar; bir değer sıfırsa, "OverrideWidth" ın 1. değeri takip edilir) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Bu, her duvar parçasının genişliğini ayarlamak için Genişlik özelliğini geçersiz kılar. temel nesne getWidths () yöntemiyle Genişlikler bilgisi sağlıyorsa yoksayılır. (1. değer, duvarın 1. segmenti için "Genişlik" özelliğini geçersiz kılar; bir değer sıfırsa, "OverrideWidth" ın 1. değeri takip edilir) - + The area of this wall as a simple Height * Length calculation Bu duvarın alanı basitçe Yükseklik * Uzunluk olarak hesaplanır - + If True, double-clicking this object in the tree activates it If True, ağaçtaki bu nesneyi çift tıklatmak onu etkinleştirir @@ -1996,58 +1996,58 @@ The 'absolute' top level of a flight of stairs leads to - The 'absolute' top level of a flight of stairs leads to + Merdiven basamaklarının gittiği 'mutlak' üst seviye The 'left outline' of stairs - The 'left outline' of stairs + Merdivenlerin 'sol dış hattı' The 'left outline' of all segments of stairs - The 'left outline' of all segments of stairs + Merdivenlerin tüm bölümlerinin 'sol dış hattı' The 'right outline' of all segments of stairs - The 'right outline' of all segments of stairs + Merdivenlerin tüm bölümlerinin 'sağ dış hattı' The thickness of the lower floor slab - The thickness of the lower floor slab + Alt zemin döşemesinin kalınlığı The thickness of the upper floor slab - The thickness of the upper floor slab + Üst zemin döşemesinin kalınlığı The type of connection between the lower slab and the start of the stairs - The type of connection between the lower slab and the start of the stairs + Alt döşeme ve merdivenlerin başlangıcı arasındaki bağlantı türü The type of connection between the end of the stairs and the upper floor slab - The type of connection between the end of the stairs and the upper floor slab + Merdivenlerin bitişi ve üst zemin döşemesi arasındaki bağlantı türü If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Eğer sıfır değilse eksenler, tam uzunlukta bir tek çizgi yerine verilen uzunlukta iki çizgi olarak gösterilecek Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Bu değerin üzerindeki şekil kırpılacak. Sınırı kaldırmak için sıfır yapın. Arch - + Components Bileşenler @@ -2057,7 +2057,7 @@ Bu nesnenin bileşenleri - + Axes Eksenler @@ -2067,27 +2067,27 @@ Eksen Oluştur - + Remove Kaldır - + Add Ekle - + Axis Eksen - + Distance Uzaklık - + Angle Açı @@ -2197,7 +2197,7 @@ Yapı Oluştur - + Create Wall Çeper Oluştur @@ -2222,42 +2222,42 @@ Pencere oluşturma - + Edit Düzenle - + Create/update component Oluştur/Güncelleştir bileşeni - + Base 2D object Temel 2D nesne - + Wires Teller - + Create new component Yeni bileşen oluştur - + Name Isim - + Type Türü - + Thickness Kalınlık @@ -2332,22 +2332,22 @@ Bir şekil hesaplanamadi - + Merge Wall Duvar birleştirme - + Please select only wall objects Lütfen sadece duvar nesneleri seçiniz - + Merge Walls Duvar birleştirme - + Distances (mm) and angles (deg) between axes Uzaklık (mm) ve eksenleri arasındaki açıları (deg) @@ -2799,22 +2799,22 @@ Kapı - + Hinge Menteşe - + Opening mode Açılış modu - + Get selected edge Seçili kenarı al - + Press to retrieve the selected edge Seçili kenarına almak için tuşuna basın @@ -2844,17 +2844,17 @@ Yeni katman - + Wall Presets... Duvar hazır ayarları... - + Hole wire Delik tel - + Pick selected Seçilen çekme @@ -2869,67 +2869,67 @@ Izgara oluştur - + Label Etiket - + Axis system components Eksen sistem bileşenleri - + Grid Izgara - + Total width Toplam genişlik - + Total height Toplam ağırlık - + Add row Satır Ekle - + Del row Satır sil - + Add col Sütun ekle - + Del col Sütun sil - + Create span Kiriş oluştur - + Remove span Kiriş kaldır - + Rows Sütunlar - + Columns Sütunlar @@ -2944,12 +2944,12 @@ Alanı sınırları - + Error: Unable to modify the base object of this wall Hata: Bu duvarın temel nesne değiştirilemiyor - + Window elements Pencere öğeleri @@ -3014,22 +3014,22 @@ Lütfen en az bir eksen seçin - + Auto height is larger than height Otomatik yükseklik yükseklikten fazladır - + Total row size is larger than height Toplam satır boyutu, yükseklikten daha büyüktür - + Auto width is larger than width Otomatik genişlik, mevcut genişlikten daha büyüktür - + Total column size is larger than width Toplam sütun boyutu, genişlikten daha büyük @@ -3244,7 +3244,7 @@ Yeniden boyutlandır - + Center Ortala @@ -3279,12 +3279,12 @@ Kesişim bulundu. - + The selected wall contains no subwall to merge Seçilen duvar birleştirme için bir alt duvar içermiyor - + Cannot compute blocks for wall Duvar blokları hesaplanamaz @@ -3294,27 +3294,27 @@ Varolan bir nesne üzerinde bir yüzey seçin veya bir ön ayar seçin - + Unable to create component Bileşen oluşturulamadı - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ana nesnedeki bir deliği tanımlayan telin sayısı. Sıfır değeri otomatik olarak en geniş teli kabul edecektir - + + default + varsayılan - + If this is checked, the default Frame value of this window will be added to the value entered here Bu işaretliyse, bu pencerenin varsayılan Çerçeve değeri buraya girilen değere eklenecektir - + If this is checked, the default Offset value of this window will be added to the value entered here Bu işaretliyse, bu pencerenin varsayılan öteleme değeri buraya girilen değere eklenecektir @@ -3469,37 +3469,37 @@ Devam - + First point of wall Duvar'ın ilk noktası - + Wall options Duvar seçenekleri - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Bu liste, bu dökümandaki tüm çoklu malzeme nesnelerini gösterir. Duvar tipleri tanımlamak için bir şeyler yaratın. - + Alignment Hizalama - + Left Sol - + Right Sağ - + Use sketches Eskizleri kullan @@ -3679,17 +3679,17 @@ Run=0 ise run hesaplanır ve yükseklik ilgili profille özdeştir.Duvar - + This window has no defined opening Bu pencere açık olarak tanımlanmamış. - + Invert opening direction Açıklık yönünü terse çevir. - + Invert hinge position Menteşe pozisyonunu tersine çevir @@ -3945,7 +3945,7 @@ Zemin oluşturma iptal edildi. Arch_AxisTools - + Axis tools Eksen araçları @@ -4119,62 +4119,62 @@ Zemin oluşturma iptal edildi. Arch_Grid - + The number of rows Satırların simge sayısı - + The number of columns Sütunların simge sayısı - + The sizes for rows Satır için boyutları - + The sizes of columns Sütunların simge sayısı - + The span ranges of cells that are merged together Birlikte birleştirilmiş hücre yayılma alanı aralığı - + The type of 3D points produced by this grid object Bu ızgara nesnesi tarafından üretilen 3B noktaların türü - + The total width of this grid Bu kılavuz toplam genişliğini - + The total height of this grid Bu kademelerin toplam yüksekliği - + Creates automatic column divisions (set to 0 to disable) Otomatik sütun bölümler (devre dışı bırakmak için 0 olarak ayarlayın) oluşturur - + Creates automatic row divisions (set to 0 to disable) Otomatik sütun bölümler (devre dışı bırakmak için 0 olarak ayarlayın) oluşturur - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Bu kılavuz ya da alt kenar normaller boyunca antenin yönünü gerekir Eğer kenar orta nokta modunda, ne zaman - + The indices of faces to hide Gizlemek için yüzleri endeksleri @@ -4216,12 +4216,12 @@ Zemin oluşturma iptal edildi. Arch_MergeWalls - + Merge Walls Duvar birleştirme - + Merges the selected walls, if possible Seçili duvarlar, mümkünse birleştirir @@ -4596,12 +4596,12 @@ Zemin oluşturma iptal edildi. Arch_Wall - + Wall Duvar - + Creates a wall object from scratch or from a selected object (wire, face or solid) Duvar nesnesini baştan veya seçili nesneden (kablo, yüz veya katı) oluşturur @@ -4922,7 +4922,7 @@ Filtrenin etkilerinin tersine çevirmek için basına ünlem(!) koyun(fitreyle u Draft - + Writing camera position Yazma kamera konumu diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index d5118047e0..ae7cd258b1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index b83febc64a..4113e14e16 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -949,32 +949,32 @@ Якщо відмічено, елемент вирівнюється по осях - + The length of this wall. Not used if this wall is based on an underlying object Довжина цієї стіни. Не використовується, якщо стіна базується на об'єкті, який розташований під нею - + The width of this wall. Not used if this wall is based on a face Ширина цієї стіни. Не використовується, якщо стіна розташована на поверхні - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Висота стіни. Задайте 0 для автоматичного визначення. Не використовується, якщо ця стіна базується на твердому тілі - + The alignment of this wall on its base object, if applicable Вирівнювання стіни на базовому об'єкті, якщо можливо - + The face number of the base object used to build this wall Номер поверхні базового об'єкту, що використовується для створення цієї стіни - + The offset between this wall and its baseline (only for left and right alignments) Зміщення стіни від базової лінії (тільки для лівого і правого вирівнювання) @@ -1054,7 +1054,7 @@ Перекриття шнурів над нижної частиною проступей з'єднань - + The number of the wire that defines the hole. A value of 0 means automatic Число дротів, що визначає отвір. Значення 0 означає автоматичне значення @@ -1074,7 +1074,7 @@ Перетворення для кожної позначки - + The axes this system is made of Осі, що утворюють систему @@ -1204,7 +1204,7 @@ Розмір шрифту - + The placement of this axis system Розташування цієї системи осей @@ -1224,57 +1224,57 @@ Товщина лінії цього об'єкту - + An optional unit to express levels Опція одиниці рівнів - + A transformation to apply to the level mark Трансформація, яка застосовується до позначки рівня - + If true, show the level Якщо увімкнено, показувати рівень - + If true, show the unit on the level tag Якщо увімкнено, показувати одиниці вимірювання на відмітці рівня - + If true, when activated, the working plane will automatically adapt to this level Якщо правильно, при активації, робоча площина автоматично адаптується до цього рівня - + The font to be used for texts Шрифт для тексту - + The font size of texts Розмір шрифту тексту - + Camera position data associated with this object Положення камери пов'язані з цим об'єктом - + If set, the view stored in this object will be restored on double-click Якщо вказано, вид збережений в цьому об'єкті буде відновлений подвійним натисканням - + The individual face colors Індивідуальний колір поверхні - + If set to True, the working plane will be kept on Auto mode Якщо встановлено значення True, робоча площина буде тримати в автоматичному режимі @@ -1419,42 +1419,42 @@ Напрямок польоту після приземлення - + Enable this to make the wall generate blocks Увімкніть це, щоб стіна генерувала блоки - + The length of each block Довжина кожного блоку - + The height of each block Висота кожного блоку - + The horizontal offset of the first line of blocks Горизонтальне зміщення першого рядка блоків - + The horizontal offset of the second line of blocks Горизонтальне зміщення другого рядка блоків - + The size of the joints between each block Розмір з'єднання між кожним блоком - + The number of entire blocks Кількість всіх блоків - + The number of broken blocks Кількість зламаних блоків @@ -1604,27 +1604,27 @@ Товщина стояків - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Якщо так, показує об’єкти, що містяться в цій Building Part, приймуть ці параметри лінії, кольору та прозорості - + The line width of child objects Ширина лінії дочірніх об'єктів - + The line color of child objects Колір лінії дочірнього об'єкту - + The shape color of child objects Колір лінії форми дочірнього об'єкту - + The transparency of child objects Прозорість дитячих об'єктів @@ -1644,37 +1644,37 @@ Цій властивості зберігається подання винахідника для цього об’єкта - + If true, display offset will affect the origin mark too Якщо так, відображення зміщення вплине на початок координат також - + If true, the object's label is displayed Якщо так, позначки об'єктів відображатимуться - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Якщо це увімкнено, то винахідник буде зберегти представництво цього об'єкта у файлі FreeCAD, дозволяє посилатись на нього в інших файлах в режимі легкої ваги. - + A slot to save the inventor representation of this object, if enabled Слот, щоб зберегти винахідник представлення цього об'єкта, якщо це увімкнено - + Cut the view above this level Вирізати вигляд цього рівня - + The distance between the level plane and the cut line Відстань між рівною площиною і лінії обрізки - + Turn cutting on when activating this level Ввімкнути вирізання при активації цього рівня @@ -1869,22 +1869,22 @@ Як намалювати стрижні - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Це замінює атрибут Ширина на встановлену ширину кожного сегмента стіни. Ігнорується, якщо базовий об’єкт надає інформацію про ширину за допомогою методу getWidths (). (Перше значення замінює атрибут 'Width' для 1-го сегмента стіни; якщо значення дорівнює нулю, буде дотримуватися 1-го значення 'OverrideWidth') - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Це замінює атрибут Align, щоб встановити Align для кожного сегмента стіни. Ігнорується, якщо базовий об'єкт надає інформацію "Вирівнювання" за допомогою методу getAligns (). (Перше значення замінює атрибут "Вирівнювання" для 1-го сегмента стіни; якщо значення не є "Ліворуч, Праворуч, Центр", буде дотримуватися 1-го значення "OverrideAlign") - + The area of this wall as a simple Height * Length calculation Площа цієї стіни як просте обчислення висоти * довжини - + If True, double-clicking this object in the tree activates it Якщо Правда, двічі клацніть на цей об'єкт в дереві активує його @@ -2041,13 +2041,13 @@ Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Геометрія, що перевищує це значення, буде відрізана. Зберігайте нуль для безмежного. Arch - + Components Компоненти @@ -2057,7 +2057,7 @@ Компоненти цього об'єкта - + Axes Вісі @@ -2067,27 +2067,27 @@ Створити вісь - + Remove Видалити - + Add Додати - + Axis Вісь - + Distance Відстань - + Angle Кут @@ -2197,7 +2197,7 @@ Створити структуру - + Create Wall Створити стінку @@ -2222,42 +2222,42 @@ Створити вікно - + Edit Правка - + Create/update component Створити або оновити компонент - + Base 2D object Базовий двовимірний об’єкт - + Wires Каркас - + Create new component Створити новий компонент - + Name Назва - + Type Тип - + Thickness Товщина @@ -2332,22 +2332,22 @@ Не вдалося обчислити форму - + Merge Wall Об'єднати стіни - + Please select only wall objects Будь-ласка виберіть тільки стіни - + Merge Walls Об'єднати стіни - + Distances (mm) and angles (deg) between axes Відстані (мм) і кути (град) між осями @@ -2799,22 +2799,22 @@ Двері - + Hinge Шарнір - + Opening mode Режим відкриття - + Get selected edge Отримати вибране ребро - + Press to retrieve the selected edge Натисніть, щоб отримати вибраний ребр @@ -2844,17 +2844,17 @@ Новий шар - + Wall Presets... Пресети Стіни - + Hole wire Отвір для дроту - + Pick selected Вибрати вибране @@ -2869,67 +2869,67 @@ Створити сітку - + Label Позначка - + Axis system components Компоненти системи осей - + Grid Сітка - + Total width Загальна ширина - + Total height Загальна висота - + Add row Додати рядок - + Del row Видалити рядок - + Add col Додати стовпчик - + Del col Видалити стовпчик - + Create span Створити проміжок - + Remove span Видалити проміжок - + Rows Рядки - + Columns Стовпці @@ -2944,12 +2944,12 @@ Проміжок меж - + Error: Unable to modify the base object of this wall Помилка: Неможливо змінити основний об'єкт цієї стіни - + Window elements Елементи вікна @@ -3014,22 +3014,22 @@ Виберіть принаймні одну вісь - + Auto height is larger than height Автоматична висота більша за висоту - + Total row size is larger than height Загальний розмір рядка перевищує висоту - + Auto width is larger than width Автоматична ширина перевищує ширину - + Total column size is larger than width Загальний розмір колони більший за ширину @@ -3244,7 +3244,7 @@ Змінити розмір - + Center Центр @@ -3279,12 +3279,12 @@ Виявлено перетин. - + The selected wall contains no subwall to merge Виділена стіна не містить вкладених стін для об'єднання - + Cannot compute blocks for wall Не можна обчислити блоки для стіни @@ -3294,27 +3294,27 @@ Виберіть грань на існуючому об'єкті або виберіть заготовку - + Unable to create component Неможливо створити торрент - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Щільність сітки, що визначає отвір у хост-об'єкті. Значення нуля автоматично приймає найбільшу сітку - + + default + за замовчуванням - + If this is checked, the default Frame value of this window will be added to the value entered here Якщо це позначено, значення кадру за замовчуванням цього вікна буде додано до значення, введеного тут - + If this is checked, the default Offset value of this window will be added to the value entered here Якщо це позначено, типове значення зміщення у цьому вікні буде додано до введеного тут значення @@ -3470,37 +3470,37 @@ Продовжити - + First point of wall Перша точка стіни - + Wall options Параметри стіни - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. У цьому списку показані всі об’єкти MultiMaterials цього документа. Створіть кілька для визначення типів стін. - + Alignment Вирівнювання - + Left Ліворуч - + Right Направо - + Use sketches Використовувати ескізи @@ -3680,17 +3680,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Стіна - + This window has no defined opening Це вікно не позначене відкриватися - + Invert opening direction Інвертувати напрям відкриття - + Invert hinge position Перевернути положення шарніру @@ -3946,7 +3946,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Інструменти осей @@ -4120,62 +4120,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Кількість рядків - + The number of columns Кількість стовпців - + The sizes for rows Розміри для рядків - + The sizes of columns Розміри стовпців - + The span ranges of cells that are merged together Масштабні межі клітин, які об'єднані разом - + The type of 3D points produced by this grid object Тип тривимірних точок, утворених цим об'єктом сітки - + The total width of this grid Загальна ширина цієї сітки - + The total height of this grid Загальна висота цієї сітки - + Creates automatic column divisions (set to 0 to disable) Автоматичне створення підрозділів стовпців (0 вимкнено) - + Creates automatic row divisions (set to 0 to disable) Створює автоматичні поділи рядків (0 - вимкнено) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not У режимі середньої точки краю, якщо ця сітка повинна переорієнтувати своїх дітей за крайовими нормалями чи ні - + The indices of faces to hide Індекси поверхонь, що сховаються @@ -4217,12 +4217,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Об'єднати стіни - + Merges the selected walls, if possible По можливості об’єднує вибрані стіни @@ -4597,12 +4597,12 @@ Floor creation aborted. Arch_Wall - + Wall Стіна - + Creates a wall object from scratch or from a selected object (wire, face or solid) Створює об’єкт стіни з нуля, або з обраного об’єкту (дріт, поверхня або суцільна) @@ -4909,7 +4909,7 @@ Leave blank to use all objects from the document <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>Список фільтрів в форматі "властивіть:значення", розділені крапкою з комою (;). Поставте ! до імені властивості для того, щоб інвертувати ефект фільтра (тобто, щоб виключити об'єкти відповідні цьому фільтру). Об'єкти, чиї властивості містять відповідне значення, будуть співпадати. Приклади допустимих фільтрів (всі не чутливі до регістру):</p><p><span style=" font-weight:600;">Name:Wall</span> - Будуть розглядатися тільки об'єкти, що містять &quot;Wall&quot; в імені (внутрішньому імені)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Будуть розглядатися тільки об'єкти, які НЕ мають &quot;Wall&quot; в імені (внутрішньому імені)</p><p><span style=" font-weight:600;">Descriptionl:Win</span> - Будуть розглядатися тільки об'єкт, що містять &quot;Win&quot; в описі</p><p><span style=" font-weight:600;">!Label:Win</span> - Будуть розглядатися тільки об'єкти, які НЕ мають &quot;Win&quot; в їхній мітці</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Рассматривает только объекты, уозглядає тільки об'єкти у яких Ifc тип &quot;Wall&quot;</p><p><span style=" font-weight:600;"><span style=" font-weight:600;">!Tag:Wall</span> - будуть розглядатися тільки об'єкти, у яких тег не дорівнює&quot;Wall&quot;</p><p>Якщо Ви залишите це поле пустим, фільтрація не будет застосовуватися</p></body></html> @@ -4919,13 +4919,13 @@ Leave blank to use all objects from the document <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> - <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> + <html><head/><body><p>Експортуються результати до файлу CSV або Markdown. </p><p><span style=" font-weight:600;">Примітка для експорту CSV:</span></p><p>у Libreoffice, ви можете залишити цей CSV файл пов'язаним клікнувши правою кнопкою миші по панелі таблиць -&gt; Нова таблиця -&gt; З файлу -&gt; посилання (Примітка: як у LibreOffice v6. правильний шлях: аркуш -&gt; Вставити аркуш... -&gt; з файлу -&gt; Огляд...)</p></body></html> Draft - + Writing camera position Запис положення камери diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index 2c43397d6f..4f78859d33 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -949,32 +949,32 @@ Si s'estableix a cert, l'element s'alinea amb els eixos - + The length of this wall. Not used if this wall is based on an underlying object La longitud del mur. No s'utilitza si el mur es basa en un objecte subjacent - + The width of this wall. Not used if this wall is based on a face L'amplària del mur. No s'utilitza si el mur es basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid L'alçària del mur. Manteniu 0 per a automàtica. No s'utilitza si el mur es basa en un sòlid - + The alignment of this wall on its base object, if applicable L'alineació del mur sobre el seu objecte de base, si correspon - + The face number of the base object used to build this wall El número de la cara de l'objecte de base utilitzat per a construir el mur - + The offset between this wall and its baseline (only for left and right alignments) La distància entre el mur i la seua línia de base (només per a les alineacions dreta i esquerra) @@ -1054,7 +1054,7 @@ La superposició dels muntants d'escala sobre la part inferior de les esteses - + The number of the wire that defines the hole. A value of 0 means automatic El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic @@ -1074,7 +1074,7 @@ Una transformació que s'aplica a cada etiqueta - + The axes this system is made of Els eixos que formen aquest sistema @@ -1204,7 +1204,7 @@ La mida de la tipografia - + The placement of this axis system La posició del sistema d'aquest eix @@ -1224,57 +1224,57 @@ L'amplària de la línia d'aquest objecte - + An optional unit to express levels Una unitat opcional per a indicar els nivells - + A transformation to apply to the level mark Una transformació que s'aplica a la marca de nivell - + If true, show the level Si és cert, mostra el nivell - + If true, show the unit on the level tag Si és cert, mostra la unitat en l'etiqueta de nivell - + If true, when activated, the working plane will automatically adapt to this level Si és cert, quan estiga activat, el pla de treball s'adaptarà automàticament a aquest nivell - + The font to be used for texts La tipografia a utilitzar per als textos - + The font size of texts La mida de la tipografia dels textos - + Camera position data associated with this object Les dades de posició de la càmera associades a aquest projecte - + If set, the view stored in this object will be restored on double-click Si s'activa, la vista emmagatzemada en aquest objecte es restaurarà amb un doble clic - + The individual face colors Els colors de la cara individual - + If set to True, the working plane will be kept on Auto mode Si s'estableix com a vertader, el pla de treball es mantindrà en mode automàtic @@ -1419,42 +1419,42 @@ La direcció d'un tram d'escala després d'un replà - + Enable this to make the wall generate blocks Habilita aquesta opció per fer que la paret genere blocs - + The length of each block La llargària de cada bloc - + The height of each block L'alçària de cada bloc - + The horizontal offset of the first line of blocks La separació horitzontal de la primera línia de blocs - + The horizontal offset of the second line of blocks La separació horitzontal de la segona línia de blocs - + The size of the joints between each block La mida de les juntes entre cada bloc - + The number of entire blocks El nombre de blocs sencers - + The number of broken blocks El nombre de blocs trencats @@ -1604,27 +1604,27 @@ La grossària de les contrapetges - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings Si és vertader, mostra els objectes continguts en aquesta part de la construcció que adoptaran aquests ajustos de de línia, color i transparència - + The line width of child objects L'amplària de la línia dels objectes fills - + The line color of child objects El color de la línia dels objectes fills - + The shape color of child objects El color de la forma dels objectes fills - + The transparency of child objects La transparència dels objectes fills @@ -1644,37 +1644,37 @@ Aquesta propietat emmagatzema una representació d'inventor per a aquest objecte - + If true, display offset will affect the origin mark too Si és cert, el desplaçament de la visualització afectarà també la marca d'origen - + If true, the object's label is displayed Si és cert, es visualitza l'etiqueta de l'objecte - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. Si està activada, la representació de l’inventor d’aquest objecte es guardarà en el fitxer FreeCAD, i permetrà fer-ne referència en altres fitxers en mode lleuger. - + A slot to save the inventor representation of this object, if enabled Una espai per a guardar la representació de l’inventor d’aquest objecte, si està habilitada - + Cut the view above this level Retalla la vista per damunt d’aquest nivell - + The distance between the level plane and the cut line Distància entre el pla de nivell i la línia de tall - + Turn cutting on when activating this level Activa el tall quan s'active aquest nivell @@ -1869,22 +1869,22 @@ Com dibuixar les barres - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) Això substitueix l’atribut d’amplària per a establir l’amplària de cada segment de mur. S'ignora si l'objecte base proporciona informació d'amplària, amb el mètode getWidths (). (El primer valor substitueix l'atribut d'«amplària» del primer segment de la paret; si un valor és zero, se seguirà el primer valor d'«OverrideWidth») - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) Això substitueix l’atribut d’alineació per a establir l’alineació de cada segment de mur. S'ignora si l'objecte base proporciona l'alineació de la informació amb el mètode getAligns (). (El primer valor substituirà l'atribut d'«Alineació» del primer segment del mur; si un valor no és «esquerra, dreta, centre", se seguirà el primer valor d'«OverrideAlign») - + The area of this wall as a simple Height * Length calculation L’àrea d’aquest mur com a simple càlcul d'alçària * llargària - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Components @@ -2057,7 +2057,7 @@ Components d'aquest objecte - + Axes Eixos @@ -2067,27 +2067,27 @@ Crea l'eix - + Remove Elimina - + Add Afegir - + Axis Eix - + Distance Distance - + Angle Angle @@ -2197,7 +2197,7 @@ Crea una estructura - + Create Wall Crea un mur @@ -2222,42 +2222,42 @@ Crea una finestra - + Edit Edita - + Create/update component Crea/actualitza el component - + Base 2D object Objecte base 2D - + Wires Filferros - + Create new component Crea un component nou - + Name Nom - + Type Tipus - + Thickness Gruix @@ -2332,22 +2332,22 @@ No s'ha pogut calcular la forma. - + Merge Wall Uneix el mur - + Please select only wall objects Seleccioneu només objectes mur - + Merge Walls Fusiona els murs - + Distances (mm) and angles (deg) between axes Distàncies (mm) i angles (graus) entre eixos @@ -2798,22 +2798,22 @@ Porta - + Hinge Frontissa - + Opening mode Mode d'obertura - + Get selected edge Obtín la vora seleccionada - + Press to retrieve the selected edge Premeu per a recuperar la vora seleccionada @@ -2843,17 +2843,17 @@ Capa nova - + Wall Presets... Murs predefinits... - + Hole wire Filferro de forat - + Pick selected Tria el seleccionat @@ -2868,67 +2868,67 @@ Crea una quadrícula - + Label Etiqueta - + Axis system components Components del sistema d'eixos - + Grid Quadrícula - + Total width Amplària total - + Total height Alçària total - + Add row Afig una fila - + Del row Suprimeix la fila - + Add col Afig una columna - + Del col Suprimeix la columna - + Create span Crea una extensió - + Remove span Suprimeix l'extensió - + Rows Files - + Columns Columnes @@ -2943,12 +2943,12 @@ Límits de l'espai - + Error: Unable to modify the base object of this wall Error: No es pot modificar l'objecte base d'aquest mur - + Window elements Elements de finestra @@ -3013,22 +3013,22 @@ Seleccioneu com a mínim un eix - + Auto height is larger than height L'alçària automàtica és més gran que l'alçària - + Total row size is larger than height La mida total de les files és major que l'alçària - + Auto width is larger than width L'amplària automàtica és major que l'amplària - + Total column size is larger than width La mida total de les columnes és major que l'amplària @@ -3243,7 +3243,7 @@ Canvia la mida - + Center Centre @@ -3278,12 +3278,12 @@ S'ha trobat una intersecció. - + The selected wall contains no subwall to merge El mur seleccionat no conté cap submur per a fusionar - + Cannot compute blocks for wall No es pot calcular els blocs per a la paret @@ -3293,27 +3293,27 @@ Trieu una cara en un objecte existent o seleccioneu un paràmetre predefinit - + Unable to create component No es pot crear el component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El número del filferros que defineix un forat en l'objecte amfitrió. Amb un valor de zero s'adoptarà automàticament el filferro més gran - + + default + per defecte - + If this is checked, the default Frame value of this window will be added to the value entered here Si açò està seleccionat, el valor per defecte del marc d'aquesta finestra s'afegirà al valor introduït ací - + If this is checked, the default Offset value of this window will be added to the value entered here Si açò està seleccionat, el valor per defecte de separació d'aquesta finestra s'afegirà al valor introduït ací @@ -3468,37 +3468,37 @@ Con&tinua - + First point of wall Primer punt del mur - + Wall options Opcions del mur - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. Aquesta llista mostra tots els objectes multimaterials d'aquest document. Creeu-ne alguns per a definir els tipus de mur. - + Alignment Alineació - + Left Esquerra - + Right Dreta - + Use sketches Utilitza els esbossos @@ -3678,17 +3678,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Mur - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3944,7 +3944,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Eines d'eixos @@ -4118,62 +4118,62 @@ Floor creation aborted. Arch_Grid - + The number of rows El nombre de files - + The number of columns El nombre de columnes - + The sizes for rows La mida de les files - + The sizes of columns La mida de les columnes - + The span ranges of cells that are merged together L'abast de cel·les que es fusionen juntes - + The type of 3D points produced by this grid object El tipus de punts 3D produïts per aquest objecte quadrícula - + The total width of this grid L'amplària total d'aquesta quadrícula - + The total height of this grid L'alçària total d'aquesta quadrícula - + Creates automatic column divisions (set to 0 to disable) Crea automàticament divisions de columna (establiu-ho a 0 per a inhabilitar-ho) - + Creates automatic row divisions (set to 0 to disable) Crea automàticament divisions de fila (establiu-ho a 0 per a inhabilitar-ho) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not En mode de punt mitjà de l'aresta, si la quadrícula ha de reorientar els seus fills a llarg de les normals de l'aresta o no - + The indices of faces to hide Els índexs de les cares que s'han d'amagar @@ -4215,12 +4215,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Fusiona els murs - + Merges the selected walls, if possible Fusiona els murs seleccionats, si és possible @@ -4595,12 +4595,12 @@ Floor creation aborted. Arch_Wall - + Wall Mur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un mur a partir de zero o d'un objecte seleccionat (línia, cara o sòlid) @@ -4924,7 +4924,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position S'està escrivint la posició de la càmera diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index 8cd25e7ef3..7acbe760b3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -949,32 +949,32 @@ Nếu đúng thì bộ phận đó được căn chỉnh với các trục - + The length of this wall. Not used if this wall is based on an underlying object Chiều dài của bức tường này. Nó không được sử dụng nếu bức tường này được xây dựng đứng trên một đối tượng ở dưới - + The width of this wall. Not used if this wall is based on a face Bề rộng của bức tường này. Nó không được sử dụng nếu bức tường này được dựa trên một bề mặt khác - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Chiều cao của bức tường này. Đặt tự động ở mức 0. Nó không được sử dụng nếu bức tường này được dựa trên một vật thể rắn khác - + The alignment of this wall on its base object, if applicable Căn chỉnh bức tường này dựa trên đối tượng cơ sở của nó, nếu áp dụng - + The face number of the base object used to build this wall Số mặt của đối tượng cơ sở được sử dụng để xây dựng bức tường này - + The offset between this wall and its baseline (only for left and right alignments) Khoảng cách giữa bức tường này và đường cơ sở của nó (chỉ đối với căn chỉnh trái và phải) @@ -1054,7 +1054,7 @@ Xếp chồng các cốn thang lên trên đáy các mặt bậc - + The number of the wire that defines the hole. A value of 0 means automatic Số dây xác định lỗ. Giá trị 0 sẽ có nghĩa là giá trị tự động @@ -1074,7 +1074,7 @@ Một phép chuyển đổi áp dụng cho mỗi nhãn - + The axes this system is made of Các trục tạo nên hệ thống này @@ -1204,7 +1204,7 @@ Kích cỡ phông chữ - + The placement of this axis system Vị trí của hệ trục này @@ -1224,57 +1224,57 @@ Chiều dài đường vẽ của bộ phận này - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts Cỡ chữ của văn bản - + Camera position data associated with this object Dữ liệu vị trí máy ảnh tương ứng với đối tượng này - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Kích hoạt tính năng này để làm cho tường tạo ra các khối - + The length of each block Chiều dài của mỗi khối - + The height of each block Chiều cao của mỗi khối - + The horizontal offset of the first line of blocks Khoảng cách theo phương ngang của hàng khối đầu tiên - + The horizontal offset of the second line of blocks Khoảng cách theo phương ngang của hàng khối thứ hai - + The size of the joints between each block Kích thước của các khớp nối giữa mỗi khối - + The number of entire blocks Số lượng của toàn bộ khối - + The number of broken blocks Số khối bị hỏng @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components Các bộ phận @@ -2057,7 +2057,7 @@ Các thành phần của bộ phận này - + Axes Các trục @@ -2067,27 +2067,27 @@ Tạo trục - + Remove Xóa bỏ - + Add Thêm mới - + Axis Trục - + Distance Distance - + Angle Góc @@ -2197,7 +2197,7 @@ Tạo kết cấu - + Create Wall Tạo tường @@ -2222,42 +2222,42 @@ Tạo cửa sổ - + Edit Chỉnh sửa - + Create/update component Tạo/cập nhật thành phần - + Base 2D object Đối tượng 2D cơ bản - + Wires Dây dẫn - + Create new component Tạo bộ phận mới - + Name Tên - + Type Kiểu - + Thickness Độ dày @@ -2332,22 +2332,22 @@ Không thể tính toán hình dạng - + Merge Wall Kết hợp tường - + Please select only wall objects Hãy chỉ chọn đối tượng tường - + Merge Walls Kết hợp những bức tường - + Distances (mm) and angles (deg) between axes Khoảng cách (mm) và góc (độ) giữa các trục @@ -2799,22 +2799,22 @@ Cửa - + Hinge Bản lề - + Opening mode Chế độ mở - + Get selected edge Lấy một cạnh được chọn - + Press to retrieve the selected edge Nhấn để chọn cạnh đã chọn @@ -2844,17 +2844,17 @@ Lớp mới - + Wall Presets... Tùy chọn tường... - + Hole wire Dây điện - + Pick selected Chọn các đối tượng đã được chọn @@ -2869,67 +2869,67 @@ Tạo lưới - + Label Nhãn - + Axis system components Các bộ phận của hệ thống trục - + Grid Lưới - + Total width Tổng bề rộng - + Total height Tổng chiều cao - + Add row Thêm hàng - + Del row Xóa hàng - + Add col Thêm cột - + Del col Xóa cột - + Create span Tạo nhịp - + Remove span Gỡ nhịp - + Rows Hàng - + Columns Cột @@ -2944,12 +2944,12 @@ Phần bao không gian - + Error: Unable to modify the base object of this wall Lỗi: Bạn không thể sửa đổi đối tượng cơ bản của bức tường này - + Window elements Các bộ phận của cửa sổ @@ -3014,22 +3014,22 @@ Hãy chọn ít nhất một trục - + Auto height is larger than height Chiều cao tự động lớn hơn chiều cao - + Total row size is larger than height Tổng kích thước các hàng lớn hơn chiều cao - + Auto width is larger than width Chiều rộng tự động lớn hơn chiều rộng - + Total column size is larger than width Tổng kích thước cột lớn hơn chiều rộng @@ -3244,7 +3244,7 @@ Resize - + Center Trung tâm @@ -3279,12 +3279,12 @@ Giao lộ đã được xác định. - + The selected wall contains no subwall to merge Bức tường đã chọn không chứa tường bao để hợp nhất - + Cannot compute blocks for wall Không thể tính toán các khối cho tường @@ -3294,27 +3294,27 @@ Chọn một bề mặt trên một đối tượng hiện có hoặc chọn một giá trị đặt trước - + Unable to create component Không thể tạo thành phần - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Số lượng dây xác định một lỗ trong đối tượng lưu trữ. Giá trị bằng 0 tức là chương trình sẽ tự động áp dụng dây lớn nhất - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left Trái - + Right Phải - + Use sketches Sử dụng bản phác thảo @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Tường - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Công cụ trục @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows Số hàng - + The number of columns Số cột - + The sizes for rows Kích thước các hàng - + The sizes of columns Kích thước các cột - + The span ranges of cells that are merged together Phạm vi khoảng cách của các ô đã sát nhập lại thành một - + The type of 3D points produced by this grid object Lưới là một loại đối tượng được tạo nên bởi các chấm 3D - + The total width of this grid Tổng bề rộng của loại lưới này - + The total height of this grid Tổng chiều cao của lưới này - + Creates automatic column divisions (set to 0 to disable) Tạo chế độ tự động chia tách cột (Đặt 0 để tắt chế độ này) - + Creates automatic row divisions (set to 0 to disable) Tạo chế độ tự động chia tách hàng (Đặt 0 để tắt chế độ này) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not Nếu ở chế độ trung điểm của cạnh, lưới gốc phải định hướng lại theo các cạnh bình thường hoặc không - + The indices of faces to hide Ẩn các dấu trên bề mặt @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls Kết hợp những bức tường - + Merges the selected walls, if possible Hợp nhất các bức tường được chọn (nếu có thể) @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall Tường - + Creates a wall object from scratch or from a selected object (wire, face or solid) Tạo một đối tượng tường từ đầu hoặc từ một đối tượng đã chọn (dây dẫn, bề mặt hoặc vật thể rắn) @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Viết vị trí camera diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index 6a75514ca8..e8a98bf03a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -949,32 +949,32 @@ 如果为真的, 则元素与坐标轴对齐 - + The length of this wall. Not used if this wall is based on an underlying object 墙体厚度. 当墙基于基对象时则不使用 - + The width of this wall. Not used if this wall is based on a face 墙体宽度. 当墙基于一个面时则不使用 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 这面墙的高度。保持0自动。如果这面墙是基于固体则不使用 - + The alignment of this wall on its base object, if applicable 如果适用，此墙在其基对象上的对齐方式 - + The face number of the base object used to build this wall 用于建成此墙的基对象的面号 - + The offset between this wall and its baseline (only for left and right alignments) 此墙与其基准线之间的偏移量 (仅用于左右对齐) @@ -1054,7 +1054,7 @@ 在线底部上的侧桁重叠部分 - + The number of the wire that defines the hole. A value of 0 means automatic 定义孔的线数。值0表示自动 @@ -1074,7 +1074,7 @@ 应用于每个标签的转换 - + The axes this system is made of 这个系统的轴是由 @@ -1204,7 +1204,7 @@ 字体大小 - + The placement of this axis system 此坐标系的位置 @@ -1224,57 +1224,57 @@ 此对象的线条宽度 - + An optional unit to express levels 表示级别的可选单元 - + A transformation to apply to the level mark 应用于级别标记的转换 - + If true, show the level 如果真，显示级别 - + If true, show the unit on the level tag 如果为 true（真）, 则在层标签上显示单位 - + If true, when activated, the working plane will automatically adapt to this level 如果真，激活时，工作平面将自动适应此级别 - + The font to be used for texts 用于文本的字体 - + The font size of texts 文本字号 - + Camera position data associated with this object 与此对象关联的相机位置数据 - + If set, the view stored in this object will be restored on double-click 如果设置，双击将还原存储在此对象中的视图 - + The individual face colors 个人面部颜色 - + If set to True, the working plane will be kept on Auto mode 如果设置为True，工作平面将保持在自动模式 @@ -1419,42 +1419,42 @@ 着陆后的飞行方向 - + Enable this to make the wall generate blocks 启用此功能可从墙体生成砖块 - + The length of each block 每个砖块的长度 - + The height of each block 每个砖块的高度 - + The horizontal offset of the first line of blocks 第一行砖块的水平偏移量 - + The horizontal offset of the second line of blocks 第二行砖块的水平偏移量 - + The size of the joints between each block 每个砖块之间接缝的大小 - + The number of entire blocks 整块砖块的数量 - + The number of broken blocks 断开的砖块的数量 @@ -1604,27 +1604,27 @@ 立体厚度 - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings 如果为真，则显示此建筑部件中包含的对象将采用这些线条、颜色和透明度设置 - + The line width of child objects 子对象的线条宽度 - + The line color of child objects 子对象的线条颜色 - + The shape color of child objects 子对象的形状颜色 - + The transparency of child objects 子对象的透明度 @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too 如果选中，显示偏移量也会影响原始标记 - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components 组件 @@ -2057,7 +2057,7 @@ 此对象的组件 - + Axes 轴线 @@ -2067,27 +2067,27 @@ 创建轴线 - + Remove 删除 - + Add 添加 - + Axis 轴线 - + Distance 距离 - + Angle 角度 @@ -2197,7 +2197,7 @@ 创建结构体 - + Create Wall 创建墙 @@ -2222,42 +2222,42 @@ 创建窗 - + Edit 编辑 - + Create/update component 创建/更新组件 - + Base 2D object 二维基对象 - + Wires 线框 - + Create new component 创建新组件 - + Name 名称 - + Type 类型 - + Thickness 厚度 @@ -2332,22 +2332,22 @@ 无法计算形状 - + Merge Wall 合并壁 - + Please select only wall objects 请选择只有墙上的对象 - + Merge Walls 合并壁 - + Distances (mm) and angles (deg) between axes 轴之间的距离 (mm) 和角度 (°) @@ -2799,22 +2799,22 @@ 门 - + Hinge 铰链 - + Opening mode 打开模式 - + Get selected edge 获取所选边缘 - + Press to retrieve the selected edge 按下去来检索选定的边缘 @@ -2844,17 +2844,17 @@ 新图层 - + Wall Presets... 墙壁预设..。 - + Hole wire 孔线 - + Pick selected 选取选定的 @@ -2869,67 +2869,67 @@ 创建网格 - + Label 标签 - + Axis system components 轴系统组件 - + Grid 网格 - + Total width 总宽度 - + Total height 总高度 - + Add row 添加行 - + Del row 删除行 - + Add col 添加列 - + Del col 删除列 - + Create span 创建跨度 - + Remove span 删除跨度 - + Rows 行 - + Columns 列 @@ -2944,12 +2944,12 @@ 空间边界 - + Error: Unable to modify the base object of this wall 错误: 无法修改此墙的基础对象 - + Window elements 窗口构件 @@ -3014,22 +3014,22 @@ 请至少选择一个坐标轴 - + Auto height is larger than height 自动高度大于高度 - + Total row size is larger than height 总行大小大于高度 - + Auto width is larger than width 自动宽度大于宽度 - + Total column size is larger than width 总列大小大于宽度 @@ -3244,7 +3244,7 @@ 调整尺寸 - + Center 中心 @@ -3279,12 +3279,12 @@ 找到交集 - + The selected wall contains no subwall to merge 在所选的墙上包含没有次墙来合并 - + Cannot compute blocks for wall 无法计算墙体砖块量 @@ -3294,27 +3294,27 @@ 在现有对象上选取一个面或选择一个预设 - + Unable to create component 无法创建组件 - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire 线的数目在主体对象中定义一个孔。值为零时将自动采用最大线数 - + + default + 默认 - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left 左视 - + Right 右视 - + Use sketches 使用草图 @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 墙 - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools 轴工具 @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows 行数 - + The number of columns 列数 - + The sizes for rows 行的大小 - + The sizes of columns 列的大小 - + The span ranges of cells that are merged together 合并在一起的单元格跨度范围 - + The type of 3D points produced by this grid object 此网格对象生成的3D 点的类型 - + The total width of this grid 此网格的总宽度 - + The total height of this grid 此网格的总高度 - + Creates automatic column divisions (set to 0 to disable) 创建自动列划分 (集为0以禁用) - + Creates automatic row divisions (set to 0 to disable) 创建自动列划分 (集为0以禁用) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not 当处于边缘中点模式时, 如果此网格必须沿边缘法线重新定向其子项, 或不 - + The indices of faces to hide 隐藏的面索引 @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls 合并壁 - + Merges the selected walls, if possible 如果可能，合并选定的墙壁 @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall 墙 - + Creates a wall object from scratch or from a selected object (wire, face or solid) 从零开始或从选定的对象(线,面或体)创建墙体 @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position 写入相机位置 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 81dfcac3d9..94e210c087 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -949,32 +949,32 @@ 如果為真的，則元素與坐標軸對齊 - + The length of this wall. Not used if this wall is based on an underlying object 牆體厚度。如果牆基於底層對象，則不使用 - + The width of this wall. Not used if this wall is based on a face 牆體寬度。如果牆基於一個面時，則不使用 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 牆體高度。保持0自动。如果牆基於實體，則不使用 - + The alignment of this wall on its base object, if applicable 如果適用，將該牆壁對準其基礎對象 - + The face number of the base object used to build this wall 用於建成此牆的基對象的面號 - + The offset between this wall and its baseline (only for left and right alignments) 此牆與其基準線之間的偏移量(僅用於左右對齊) @@ -1054,7 +1054,7 @@ The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -1074,7 +1074,7 @@ A transformation to apply to each label - + The axes this system is made of 這個系統的軸是由 @@ -1204,7 +1204,7 @@ The font size - + The placement of this axis system The placement of this axis system @@ -1224,57 +1224,57 @@ The line width of this object - + An optional unit to express levels An optional unit to express levels - + A transformation to apply to the level mark A transformation to apply to the level mark - + If true, show the level If true, show the level - + If true, show the unit on the level tag If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts The font to be used for texts - + The font size of texts The font size of texts - + Camera position data associated with this object Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click If set, the view stored in this object will be restored on double-click - + The individual face colors The individual face colors - + If set to True, the working plane will be kept on Auto mode If set to True, the working plane will be kept on Auto mode @@ -1419,42 +1419,42 @@ The direction of flight after landing - + Enable this to make the wall generate blocks Enable this to make the wall generate blocks - + The length of each block The length of each block - + The height of each block The height of each block - + The horizontal offset of the first line of blocks The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks The horizontal offset of the second line of blocks - + The size of the joints between each block The size of the joints between each block - + The number of entire blocks The number of entire blocks - + The number of broken blocks The number of broken blocks @@ -1604,27 +1604,27 @@ The thickness of the risers - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects The line width of child objects - + The line color of child objects The line color of child objects - + The shape color of child objects The shape color of child objects - + The transparency of child objects The transparency of child objects @@ -1644,37 +1644,37 @@ This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too If true, display offset will affect the origin mark too - + If true, the object's label is displayed If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled A slot to save the inventor representation of this object, if enabled - + Cut the view above this level Cut the view above this level - + The distance between the level plane and the cut line The distance between the level plane and the cut line - + Turn cutting on when activating this level Turn cutting on when activating this level @@ -1869,22 +1869,22 @@ How to draw the rods - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it If True, double-clicking this object in the tree activates it @@ -2047,7 +2047,7 @@ Arch - + Components 組件 @@ -2057,7 +2057,7 @@ 此物件之組成 - + Axes 軸 @@ -2067,27 +2067,27 @@ 建立軸 - + Remove 移除 - + Add 新增 - + Axis 軸 - + Distance 距離 - + Angle 角度 @@ -2197,7 +2197,7 @@ 建立結構 - + Create Wall 建立牆面 @@ -2222,42 +2222,42 @@ 建立窗戶 - + Edit 編輯 - + Create/update component 建立/更新元件 - + Base 2D object 基礎 2D 物件 - + Wires 線 - + Create new component 建立新元件 - + Name 名稱 - + Type 類型 - + Thickness 厚度 @@ -2332,22 +2332,22 @@ Couldn't compute a shape - + Merge Wall 合併牆面 - + Please select only wall objects 請僅選擇牆面物件 - + Merge Walls 合併牆面 - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes @@ -2799,22 +2799,22 @@ 門 - + Hinge Hinge - + Opening mode Opening mode - + Get selected edge Get selected edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -2844,17 +2844,17 @@ 新圖層 - + Wall Presets... Wall Presets... - + Hole wire Hole wire - + Pick selected Pick selected @@ -2869,67 +2869,67 @@ Create Grid - + Label Label - + Axis system components Axis system components - + Grid 格線 - + Total width 總寬度 - + Total height 總高度 - + Add row Add row - + Del row Del row - + Add col Add col - + Del col Del col - + Create span Create span - + Remove span Remove span - + Rows Rows - + Columns Columns @@ -2944,12 +2944,12 @@ Space boundaries - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Window elements Window elements @@ -3014,22 +3014,22 @@ Please select at least one axis - + Auto height is larger than height Auto height is larger than height - + Total row size is larger than height Total row size is larger than height - + Auto width is larger than width Auto width is larger than width - + Total column size is larger than width Total column size is larger than width @@ -3244,7 +3244,7 @@ Resize - + Center 中心 @@ -3279,12 +3279,12 @@ Intersection found. - + The selected wall contains no subwall to merge The selected wall contains no subwall to merge - + Cannot compute blocks for wall Cannot compute blocks for wall @@ -3294,27 +3294,27 @@ Choose a face on an existing object or select a preset - + Unable to create component Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default + default - + If this is checked, the default Frame value of this window will be added to the value entered here If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here If this is checked, the default Offset value of this window will be added to the value entered here @@ -3469,37 +3469,37 @@ Con&tinue - + First point of wall First point of wall - + Wall options Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment Alignment - + Left 左 - + Right 右 - + Use sketches Use sketches @@ -3679,17 +3679,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 牆面 - + This window has no defined opening This window has no defined opening - + Invert opening direction Invert opening direction - + Invert hinge position Invert hinge position @@ -3945,7 +3945,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools Axis tools @@ -4119,62 +4119,62 @@ Floor creation aborted. Arch_Grid - + The number of rows The number of rows - + The number of columns The number of columns - + The sizes for rows The sizes for rows - + The sizes of columns The sizes of columns - + The span ranges of cells that are merged together The span ranges of cells that are merged together - + The type of 3D points produced by this grid object The type of 3D points produced by this grid object - + The total width of this grid The total width of this grid - + The total height of this grid The total height of this grid - + Creates automatic column divisions (set to 0 to disable) Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide The indices of faces to hide @@ -4216,12 +4216,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls 合併牆面 - + Merges the selected walls, if possible 若可行合併所選牆面 @@ -4596,12 +4596,12 @@ Floor creation aborted. Arch_Wall - + Wall 牆面 - + Creates a wall object from scratch or from a selected object (wire, face or solid) 由草圖或選定物件(線,面或固體)建立牆面物件 @@ -4925,7 +4925,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position Writing camera position diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm index f8f44c6d76..7935ab42a0 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts index b4d8bd3f4b..76fb8dce69 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts @@ -305,7 +305,7 @@ <html><head/><body><p>Fixes the first geometry in its rotation and translation. Note that fix only works its the direct parent assembly. If you stack assemblies, the parent assembly will not be fixed inside the other ones.</p></body></html> - <html><head/><body><p>Fixes the first geometry in its rotation and translation. Note that fix only works its the direct parent assembly. If you stack assemblies, the parent assembly will not be fixed inside the other ones.</p></body></html> + <html><head/><body><p>회전 및 변환에서 첫 번째 형상을 수정합니다. 수정은 직접 상위 어셈블리만 작동합니다. 어셈블리를 스택하면 상위 어셈블리가 다른 어셈블리 안에 고정되지 않습니다.</p></body></html> diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm index b12fab7ce8..7a9cfac051 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts index 2b062900f4..0625d77aca 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts @@ -305,7 +305,7 @@ <html><head/><body><p>Fixes the first geometry in its rotation and translation. Note that fix only works its the direct parent assembly. If you stack assemblies, the parent assembly will not be fixed inside the other ones.</p></body></html> - <html><head/><body><p>Poprawia pierwszą geometrię pod względem obrotu i przesunięcia. Zauważ, że poprawka działa tylko dla bezpośredniego zespołu nadrzędnego. Jeśli układasz geometrię na stosie, geometria nadrzędna nie zostanie poprawiona względem pozostałych zespołów.</p></body></html> + <html><head/><body><p>Poprawia pierwszą geometrię pod względem obrotu i przesunięcia. Zauważ, że poprawka działa tylko dla bezpośredniego zespołu nadrzędnego. Jeśli układasz geometrię w stos, geometria nadrzędna nie zostanie poprawiona względem pozostałych zespołów.</p></body></html> diff --git a/src/Mod/Draft/Resources/translations/Draft_af.qm b/src/Mod/Draft/Resources/translations/Draft_af.qm index 1cf302a556..624da97b85 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_af.qm and b/src/Mod/Draft/Resources/translations/Draft_af.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.ts b/src/Mod/Draft/Resources/translations/Draft_af.ts index 8a19a053f4..3a3bd0fd0f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_af.ts +++ b/src/Mod/Draft/Resources/translations/Draft_af.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktiewe opdrag: - + None Geen @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet Lengte - + Angle Hoek @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Aantal sye - + Offset Verplasing @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Afstand @@ -5720,22 +5723,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Bo-aansig - + Front Vooraansig - + Side Side - + Current working plane Current working plane @@ -5760,15 +5763,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6936,7 +6934,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6946,27 +6944,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7071,37 +7069,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7131,22 +7119,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Create B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Custom @@ -7256,12 +7244,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7281,7 +7269,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7500,6 +7488,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.qm b/src/Mod/Draft/Resources/translations/Draft_ar.qm index 1a29efa0d4..e016edfe82 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ar.qm and b/src/Mod/Draft/Resources/translations/Draft_ar.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.ts b/src/Mod/Draft/Resources/translations/Draft_ar.ts index c896caff9c..f2a3ffb734 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ar.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ar.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5215,12 +5218,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5269,7 +5272,7 @@ Note: C++ exporter is faster, but is not as featureful yet الأمر النشط: - + None لا يوجد @@ -5324,7 +5327,7 @@ Note: C++ exporter is faster, but is not as featureful yet الطول - + Angle الزاوية @@ -5369,7 +5372,7 @@ Note: C++ exporter is faster, but is not as featureful yet عدد من الجانبين - + Offset إزاحة @@ -5449,7 +5452,7 @@ Note: C++ exporter is faster, but is not as featureful yet عنوان - + Distance Distance @@ -5723,22 +5726,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top أعلى - + Front أمام - + Side Side - + Current working plane Current working plane @@ -5763,15 +5766,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6939,7 +6937,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6949,27 +6947,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7074,37 +7072,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7134,22 +7122,22 @@ To enabled FreeCAD to download these libraries, answer Yes. إنشاء منحنى B - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom مخصص @@ -7259,12 +7247,12 @@ To enabled FreeCAD to download these libraries, answer Yes. تجميع تلقائى - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7284,7 +7272,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7503,6 +7491,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index d8f09c247f..f7753a6d61 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index fc7d928b68..7d5cdb35fd 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -1483,7 +1483,7 @@ mitjançant l'opció Eines ->Gestor de complements Activa o desactiva la restricció al pla de treball - + Unable to insert new object into a scaled part No es pot inserir un nou objecte a una part escalada @@ -1633,7 +1633,7 @@ La matriu es pot convertir en polar o circular canviant-ne el tipus.Crea un xamfrà - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction No s'ha definit la direcció de desplaçament. Si us plau, moveu el ratolí a un o altre costat de l'objecte abans per indicar-ne la direcció @@ -2072,12 +2072,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Afegir al grup de construcció - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2835,20 +2835,6 @@ Podeu seleccionar també tres vèrtexs o un «proxy» de pla de preball. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Crea un proxy de pla de treball - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Crea un objecte proxy del pla de treball actual. -Un cop l'objecte és creat, feu doble clic a la vista d'arbre per a restaurar la posició de càmera les visibilitats de l'objecte. -Aleshores, podeu usar-lo per desar posicions de càmera i estats d'objectes sempre que sigui necessari. - Draft_Shape2DView @@ -3320,6 +3306,23 @@ Per exemple, pot unir objectes seleccionats en un de sol, convertir simples ares Converteix una polilínia seleccionada a B-spline, o una B-spline a polilínia. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Crea un proxy de pla de treball + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Crea un objecte proxy del pla de treball actual. +Un cop l'objecte és creat, feu doble clic a la vista d'arbre per a restaurar la posició de càmera les visibilitats de l'objecte. +Aleshores, podeu usar-lo per desar posicions de càmera i estats d'objectes sempre que sigui necessari. + + Form @@ -5151,12 +5154,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversió correcta - + Converting: Converting: @@ -5205,7 +5208,7 @@ Note: C++ exporter is faster, but is not as featureful yet ordre actiu: - + None Cap @@ -5260,7 +5263,7 @@ Note: C++ exporter is faster, but is not as featureful yet Longitud - + Angle Angle @@ -5305,7 +5308,7 @@ Note: C++ exporter is faster, but is not as featureful yet Nombre de costats - + Offset Equidistancia (ofset) @@ -5385,7 +5388,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etiqueta - + Distance Distance @@ -5658,22 +5661,22 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Si està marcat, els sub-elements es modificaran en lloc dels objectes sencers - + Top Planta - + Front Alçat - + Side Costat - + Current working plane Pla de treball actual @@ -5698,15 +5701,10 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Premeu aquest botó per a crear l’objecte de text o finalitzeu el vostre text amb dues línies en blanc - + Offset distance Distància de separació - - - Trim distance - Distància de retall - Change default style for new objects @@ -6874,7 +6872,7 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Inverteix l'acotació - + Stretch Estira @@ -6884,27 +6882,27 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Seleccioneu un objecte per estirar - + Pick first point of selection rectangle Trieu el primer punt del rectangle de selecció - + Pick opposite point of selection rectangle Trieu el punt oposat del rectangle de selecció - + Pick start point of displacement Seleccioni el punt inicial del desplaçament - + Pick end point of displacement Seleccioni el punt final del desplaçament - + Turning one Rectangle into a Wire Transformant un rectangle en un filferro @@ -7009,37 +7007,27 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Seleccioneu objectes per a retallar o allargar - + Pick distance Trieu la distància - - The offset distance - Distància de desplaçament - - - - The offset angle - L'angle de desplaçament - - - + Unable to trim these objects, only Draft wires and arcs are supported. No es poden retallar aquests objectes, només es permeten filferros i arcs d'Esbós. - + Unable to trim these objects, too many wires No es poden retallar aquests objectes, massa filferros - + These objects don't intersect. Aquest objectes no es creuen. - + Too many intersection points. Massa punts d'intersecció. @@ -7069,22 +7057,22 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Crea un B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Trieu una cara, 3 vèrtexs o un Proxi de PT per definir el pla del dibuix - + Working plane aligned to global placement of El pla de treball s'ha alineat al posicionament global de - + Dir Dir - + Custom Personalitzat @@ -7194,12 +7182,12 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Agrupament automàtic - + Add new Layer Afegeix una capa nova - + Add to construction group Afegeix al grup de construcció @@ -7219,7 +7207,7 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.No es pot desplaçar aquest tipus d'objecte - + Offset of Bezier curves is currently not supported El desplaçament de corbes Bézier no és suportat actualment @@ -7438,6 +7426,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index b7f6d8f7c4..27e1d90cfe 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 26fdef460d..0a0d2c89ee 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -1488,7 +1488,7 @@ z menu Nástroje -> Manažer doplňků Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1641,7 +1641,7 @@ The array can be turned into a polar or a circular array by changing its type.Vytvořit sražení - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Směr odsazení není definován. Prosím, přesuňte myš na jednu nebo druhou stranu objektu pro naznačení směru @@ -2080,12 +2080,12 @@ Musí být alespoň 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2856,20 +2856,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3346,6 +3332,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5201,12 +5204,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Převod byl úspěšný - + Converting: Converting: @@ -5255,7 +5258,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktivní příkaz: - + None Žádný @@ -5310,7 +5313,7 @@ Note: C++ exporter is faster, but is not as featureful yet Délka - + Angle Úhel @@ -5355,7 +5358,7 @@ Note: C++ exporter is faster, but is not as featureful yet Počet stran - + Offset Odstup @@ -5435,7 +5438,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5708,22 +5711,22 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? If checked, subelements will be modified instead of entire objects - + Top Horní - + Front Přední - + Side Side - + Current working plane Current working plane @@ -5748,15 +5751,10 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6924,7 +6922,7 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Flip dimension - + Stretch Roztáhnout @@ -6934,27 +6932,27 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7059,37 +7057,27 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Vyberte objekty k oříznutí nebo rozšíření - + Pick distance Zvolte vzdálenost - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. Tyto objekty se neprotínají. - + Too many intersection points. Too many intersection points. @@ -7119,22 +7107,22 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Vytvoří B-splajn - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Vlastní @@ -7244,12 +7232,12 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Automatické seskupování - + Add new Layer Přidat novou vrstvu - + Add to construction group Add to construction group @@ -7269,7 +7257,7 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7488,6 +7476,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 1a6ec14336..99c9e1315f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 12a051831b..85db5d1819 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -1119,12 +1119,12 @@ Benutzen Sie 'arch' um die US-Bogen Notation zu erzwingen If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Wenn dies wahr ist, wird dieses Objekt nur sichtbare Objekte enthalten This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Dieses Objekt wird nur neu berechnet, wenn dies wahr ist. @@ -1490,7 +1490,7 @@ from menu Tools -> Addon Manager Schaltet die Beschränkung auf die Arbeitsebene ein oder aus - + Unable to insert new object into a scaled part Kann kein neues Objekt in einen skaliertes Teil einfügen @@ -1643,7 +1643,7 @@ Die Anordnung kann in eine orthogonale oder polare Anordnung durch ändern des T Fase erstellen - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Versatz Richtung ist nicht definiert. Bitte bewegen Sie die Maus auf einer Seiten des Objekts zuerst, um eine Richtung anzuzeigen @@ -2083,12 +2083,12 @@ Es muss mindestens 2 sein. Draft_AddConstruction - + Add to Construction group Zur Konstruktionsgruppe hinzufügen - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2855,20 +2855,6 @@ Du kannst auch drei Punkte oder einen Proxy der Arbeitsebene auswählen. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Arbeitsebenen Proxy erstellen - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Erstellt ein Proxy-Objekt aus der aktuellen Arbeitsebene. -Sobald das Objekt erstellt wurde, doppelklicke in der Baumansicht darauf, um die Kameraposition und die Sichtbarkeit der Objekte wiederherzustellen. -Danach kannst Du damit jederzeit eine andere Kameraposition und Objektzustände speichern. - Draft_Shape2DView @@ -3342,6 +3328,23 @@ Beispielsweise kann es die ausgewählten Objekte zu einem einzigen zusammenfüge Wandelt einen ausgewählten Linienzug in einen B-Spline oder einen B-Spline in einen Linienzug. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Arbeitsebenen Proxy erstellen + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Erstellt ein Proxy-Objekt aus der aktuellen Arbeitsebene. +Sobald das Objekt erstellt wurde, doppelklicke in der Baumansicht darauf, um die Kameraposition und die Sichtbarkeit der Objekte wiederherzustellen. +Danach kannst Du damit jederzeit eine andere Kameraposition und Objektzustände speichern. + + Form @@ -5193,12 +5196,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Konvertierung erfolgreich - + Converting: Konvertierung: @@ -5247,7 +5250,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktiver Befehl: - + None Kein @@ -5302,7 +5305,7 @@ Note: C++ exporter is faster, but is not as featureful yet Länge - + Angle Winkel @@ -5347,7 +5350,7 @@ Note: C++ exporter is faster, but is not as featureful yet Anzahl der Seiten - + Offset Versetzen @@ -5427,7 +5430,7 @@ Note: C++ exporter is faster, but is not as featureful yet Bezeichnung - + Distance Abstand @@ -5699,22 +5702,22 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Wenn aktiviert, werden Subelemente anstatt ganzer Objekte geändert - + Top Oben - + Front Vorne - + Side Seite - + Current working plane Aktuelle Arbeitsebene @@ -5739,15 +5742,10 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Drücken Sie diese Schaltfläche, um das Textobjekt zu erstellen, oder beenden Sie Ihren Text mit zwei leeren Zeilen - + Offset distance Versatzabstand - - - Trim distance - Abstand trimmen - Change default style for new objects @@ -6914,7 +6912,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Bemaßung umkehren - + Stretch Strecken @@ -6924,27 +6922,27 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Wähle ein zu streckendes Objekt aus - + Pick first point of selection rectangle Wähle den ersten Punkt des Auswahlrechtecks - + Pick opposite point of selection rectangle Wählen Sie den gegenüberliegenden Punkt des Auswahlrechtecks - + Pick start point of displacement Wähle Startpunkt der Verschiebung - + Pick end point of displacement Wähle Endpunkt der Verschiebung - + Turning one Rectangle into a Wire Verwandle ein Rechteck in Kantenzug @@ -7049,37 +7047,27 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Wähle Objekt(e) zum verkürzen/verlängern - + Pick distance Abstand auswählen - - The offset distance - Der Versatzabstand - - - - The offset angle - Der Versatzwinkel - - - + Unable to trim these objects, only Draft wires and arcs are supported. Objekte könne nicht beschnitten werden, nur Draft Linien und Bögen werden unterstützt. - + Unable to trim these objects, too many wires Objekte könne nicht beschnitten werden, zu viele Linien - + These objects don't intersect. Diese Objekte überschneiden sich nicht. - + Too many intersection points. Zu viele Schnittpunkte. @@ -7109,22 +7097,22 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z B-Spline erstellen - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Wähle eine Fläche, 3 Punkte oder einen WP Proxy um die Zeichenebene zu definieren - + Working plane aligned to global placement of Arbeitsebene ausgerichtet an der globalen Platzierung von - + Dir Richtung - + Custom Benutzerdefiniert @@ -7234,12 +7222,12 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Autogruppe - + Add new Layer Neue Ebene hinzufügen - + Add to construction group Zur Konstruktionsgruppe hinzufügen @@ -7259,7 +7247,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Kann diesen Objekttyp nicht versetzen - + Offset of Bezier curves is currently not supported Versatz von Bezierkurven wird derzeit nicht unterstützt @@ -7477,6 +7465,11 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istAusgewählte Formen müssen eine Ebene definieren + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 15e81de4ca..c374d8e1e8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index 652c5bb240..e9bb3dc8ea 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2087,12 +2087,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2863,20 +2863,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3353,6 +3339,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet ενεργή εντολή: - + None Κανένα @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet Μήκος - + Angle Γωνία @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Αριθμός πλευρών - + Offset Μετατοπίστε @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Ετικέτα - + Distance Distance @@ -5720,22 +5723,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer If checked, subelements will be modified instead of entire objects - + Top Πάνω - + Front Εμπρόσθια - + Side Side - + Current working plane Current working plane @@ -5760,15 +5763,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6936,7 +6934,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Flip dimension - + Stretch Stretch @@ -6946,27 +6944,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7071,37 +7069,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7131,22 +7119,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Δημιουργία καμπύλης B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Επιλογή @@ -7256,12 +7244,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7281,7 +7269,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cannot offset this object type - + Offset of Bezier curves is currently not supported Η μετατόπιση των καμπυλών Bezier δεν υποστηρίζεται αυτήν τη στιγμή @@ -7500,6 +7488,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index 16cc356007..bac2aed8e5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index e771d18da1..a5d61266c7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -1122,12 +1122,12 @@ Utilice 'arch' para forzar notación de arco de Estados Unidos If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Si es Verdadero, este objeto incluirá sólo objetos visibles This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Este objeto será recalculado sólo si es Verdadero. @@ -1495,7 +1495,7 @@ desde el menú Herramientas -> Administrador de complementos Activa / desactiva restringir al plano de trabajo - + Unable to insert new object into a scaled part No se puede insertar un nuevo objeto en una parte escalada @@ -1648,7 +1648,7 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo.Crear chaflán - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La dirección del desplazamiento no está definida. Por favor, mueva el ratón a cada lado del objeto primero para indicar una dirección @@ -2087,12 +2087,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Añadir al grupo de construcción - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2862,20 +2862,6 @@ También puede seleccionar tres vértices o un proxy de Plan de Trabajo. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Crear Proxy del plano de trabajo - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Crea un objeto proxy desde el plano de trabajo actual. -Una vez creado el objeto haga doble clic en él en la vista de árbol para restaurar la posición de la cámara y las visibilidades de los objetos. -Entonces puedes usarlo para guardar una posición diferente de la cámara y estados de los objetos cuando lo necesites. - Draft_Shape2DView @@ -3169,8 +3155,8 @@ se reducirá a la proyección de ese punto en el plano de trabajo actual.Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. - Divida la línea o polilínea seleccionada en dos líneas independientes -o políneas haciendo clic en cualquier lugar del objeto original. + Divide la línea o polilínea seleccionada en dos líneas independientes +o polilíneas haciendo clic en cualquier lugar del objeto original. Funciona mejor al elegir un punto en un segmento recto y no un vértice de esquina. @@ -3352,6 +3338,23 @@ convierte bordes cerrados en caras llenas y polígonos paramétricos, y combina Convierte un polilínea seleccionado a una B-spline, o una B-spline a polilínea. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Crear Proxy del plano de trabajo + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Crea un objeto proxy desde el plano de trabajo actual. +Una vez creado el objeto haga doble clic en él en la vista de árbol para restaurar la posición de la cámara y las visibilidades de los objetos. +Entonces puedes usarlo para guardar una posición diferente de la cámara y estados de los objetos cuando lo necesites. + + Form @@ -4251,7 +4254,7 @@ such as "Arial:Bold" Sketches - Bocetos + Croquis @@ -5207,12 +5210,12 @@ Nota: el exportador de C++ es más rápido, no está implementado todavía ImportDWG - + Conversion successful Conversión realizada correctamente - + Converting: Convirtiendo: @@ -5261,7 +5264,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavíaComando activo: - + None Ninguno @@ -5316,7 +5319,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavíaLongitud - + Angle Ángulo @@ -5361,7 +5364,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavíaNúmero de lados - + Offset Equidistancia @@ -5441,7 +5444,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavíaEtiqueta - + Distance Distancia @@ -5713,22 +5716,22 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Si está marcado, los subelementos serán modificados en lugar de objetos enteros - + Top Planta - + Front Alzado - + Side Lado - + Current working plane Plano de trabajo actual @@ -5753,15 +5756,10 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Presione este botón para crear el objeto de texto, o termine su texto con dos líneas en blanco - + Offset distance Distancia de desplazamiento - - - Trim distance - Recortar distancia - Change default style for new objects @@ -6927,7 +6925,7 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Invertir dimensión - + Stretch Estirar @@ -6937,27 +6935,27 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Seleccione un objeto para estirar - + Pick first point of selection rectangle Elegir el primer punto del rectángulo de selección - + Pick opposite point of selection rectangle Elegir el punto opuesto del rectángulo de selección - + Pick start point of displacement Elegir punto de inicio del desplazamiento - + Pick end point of displacement Elegir punto final del desplazamiento - + Turning one Rectangle into a Wire Convertir un Rectángulo en Alambre @@ -7062,37 +7060,27 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Seleccionar objetos para recortar o extender - + Pick distance Elegir distancia - - The offset distance - La distancia de desplazamiento - - - - The offset angle - El ángulo de desplazamiento - - - + Unable to trim these objects, only Draft wires and arcs are supported. Incapaz de recortar estos objetos, sólo alambres y arcos de Borrador son compatibles. - + Unable to trim these objects, too many wires Incapaz de recortar estos objetos, demasiados alambres - + These objects don't intersect. Estos objetos no intersectan. - + Too many intersection points. Demasiados puntos de intersección. @@ -7122,22 +7110,22 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Crear B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Elige una cara, 3 vértices o un proxy WP para definir el plano de dibujo - + Working plane aligned to global placement of Plano de trabajo alineado a la colocación global de - + Dir Dir - + Custom Personalizado @@ -7247,12 +7235,12 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Autogrupo - + Add new Layer Añadir nueva Capa - + Add to construction group Añadir al grupo de construcción @@ -7272,7 +7260,7 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.No se puede hacer desplazamiento a este tipo de objeto - + Offset of Bezier curves is currently not supported El desplazamiento de las curvas Bezier no está soportado actualmente @@ -7490,6 +7478,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledLas formas seleccionadas deben definir un plano + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 6000d3097e..aae83b2e44 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index a56607a5be..e60e1bd4e2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -1097,35 +1097,35 @@ Erabili 'arch' US arku-notazioa behartzeko. For Cutlines and Cutfaces modes, this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location + Mozketa-lerroen eta mozketa-aurpegien moduetarako, + honek mozketa-tokian uzten ditu aurpegiak Length of line segments if tessellating Ellipses or B-splines into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments + Lerro-segmentuen luzera, elipseak edo B-spline kurbak + lerro-segmentuetara teselatzen badira If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + Hau egia bada, geometria solidoa soilik maneiatuko da. Honek oinarri-objektuaren 'Solidoak soilik' propietatea gainidazten du If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Hau egia bada, edukiak sekzio-planoaren ertzetatik ebakitzen da, aplikagarria bada. Honek oinarri-objektuaren 'Ebaki' propietatea gainidazten du If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Hau egia bada, objektu honek ikusgai dauden objektuak soilik hartuko ditu This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Objektua birkalkulatu egingo da hau egia bada soilik. @@ -1493,7 +1493,7 @@ Instalatu DXF liburutegiaren gehigarria eskuz Laneko planora murriztea aktibatzen/desaktibatzen du - + Unable to insert new object into a scaled part Ezin izan da objektu berria txertatu eskalatutako piezan @@ -1646,7 +1646,7 @@ Matrizearen mota aldatu daiteke, polarra edo zirkularra izan dadin.Sortu alaka - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Desplazamenduaren norabidea ez dago definituta. Eraman sagua objektuaren aldeetako batera, norabide bat adierazteko @@ -2085,12 +2085,12 @@ Gutxienez 2 izan behar du. Draft_AddConstruction - + Add to Construction group Gehitu eraikuntza taldeari - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2862,20 +2862,6 @@ Laneko plano baten proxy baten hiru erpin ere hautatu daitezke. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Sortu laneko planoaren proxy-a - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Proxy-objektu bat sortzen du uneko laneko planotik abiatuta. -Objektua sortu ondoren, egin klik bikoitza zuhaitz-bistan kameraren kokapena eta objektuen ikusgaitasunak leheneratzeko. -Ondoren, kameraren kokapen desberdina eta objektuen egoera desberdinak gorde daitezke bertan, behar direnerako. - Draft_Shape2DView @@ -3353,6 +3339,23 @@ bihurtu daitezke, eta aurpegi anitz aurpegi bakarrean fusionatu daitezke.Hautatutako polilerroa B-spline bihurtzen du, edo B-spline kurba polilerro bihurtzen du. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Sortu laneko planoaren proxy-a + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Proxy-objektu bat sortzen du uneko laneko planotik abiatuta. +Objektua sortu ondoren, egin klik bikoitza zuhaitz-bistan kameraren kokapena eta objektuen ikusgaitasunak leheneratzeko. +Ondoren, kameraren kokapen desberdina eta objektuen egoera desberdinak gorde daitezke bertan, behar direnerako. + + Form @@ -3778,7 +3781,7 @@ value by using the [ and ] keys while drawing The space between the text and the dimension line - The space between the text and the dimension line + Testuaren eta kota-lerroaren arteko tartea @@ -3788,7 +3791,7 @@ value by using the [ and ] keys while drawing The spacing between different lines of text - The spacing between different lines of text + Testu-lerro desberdinen arteko tartea @@ -5198,12 +5201,12 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. ImportDWG - + Conversion successful Bihurketa ongi egin da - + Converting: Bihurtzen: @@ -5252,7 +5255,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Komando aktiboa: - + None Bat ere ez @@ -5307,7 +5310,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Luzera - + Angle Angelua @@ -5352,7 +5355,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Alde kopurua - + Offset Desplazamendua @@ -5432,7 +5435,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Etiketa - + Distance Distantzia @@ -5706,22 +5709,22 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Hautatuta badaude, azpi-elementuek objektu osoa ordeztuko dute - + Top Goikoa - + Front Aurrekoa - + Side Aldea - + Current working plane Uneko laneko planoa @@ -5746,15 +5749,10 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Sakatu botoi hau testu-objektua sortzeko, edo amaitu zure testua bi lerro zurirekin - + Offset distance Desplazamendu-distantzia - - - Trim distance - Muxarratze-distantzia - Change default style for new objects @@ -6922,7 +6920,7 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Irauli kota - + Stretch Luzatu @@ -6932,27 +6930,27 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Hautatu luzatuko den objektua - + Pick first point of selection rectangle Aukeratu hautapen-laukizuzenaren lehen puntua - + Pick opposite point of selection rectangle Aukeratu hautapen-laukizuzenaren beste aldeko puntua - + Pick start point of displacement Aukeratu desplazamenduaren hasiera-puntua - + Pick end point of displacement Aukeratu desplazamenduaren amaiera-puntua - + Turning one Rectangle into a Wire Laukizuzen bat alanbre bihurtzen @@ -7057,37 +7055,27 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Hautatu muxarratuko/luzatuko diren objektuak - + Pick distance Aukeratu distantzia - - The offset distance - Desplazamendu-distantzia - - - - The offset angle - Desplazamendu-angelua - - - + Unable to trim these objects, only Draft wires and arcs are supported. Ezin dira objektu horiek muxarratu, zirriborro-alanbreak eta arkuak soilik onartzen dira. - + Unable to trim these objects, too many wires Ezin dira objektu horiek muxarratu, alanbre gehiegi - + These objects don't intersect. Objektu hauek ez dute elkar ebakitzen. - + Too many intersection points. Ebakitze-puntu gehiegi. @@ -7117,22 +7105,22 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Sortu B-spline elementua - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Aukeratu aurpegi bat, 3 erpin edo WP proxy bat marrazte-planoa definitzeko - + Working plane aligned to global placement of Honako objektuaren kokapen globalarekin lerrokatutako laneko area: - + Dir Norab. - + Custom Pertsonalizatua @@ -7242,12 +7230,12 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Talde automatikoa - + Add new Layer Gehitu geruza berria - + Add to construction group Gehitu eraikuntza taldeari @@ -7267,7 +7255,7 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Ezin da objektu mota hau desplazatu - + Offset of Bezier curves is currently not supported Bezier kurben desplazamendua ezin da oraindik egin @@ -7483,9 +7471,14 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Selected Shapes must define a plane - Selected Shapes must define a plane + Hautatutako formek plano bat definitu behar dute + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index 6eee9e03a3..f997fd1cb5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index c4cc745cb6..c6403014c5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -1486,7 +1486,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1639,7 +1639,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Siirtymän suuntaa ei ole määritelty. Ole hyvä ja siirrä hiirtä objektin jommalle kummalle puolelle osoittaaksesi ensin suunnan @@ -2079,12 +2079,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2855,20 +2855,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3345,6 +3331,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5202,12 +5205,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5256,7 +5259,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktiivinen komento: - + None Ei mitään @@ -5311,7 +5314,7 @@ Note: C++ exporter is faster, but is not as featureful yet Pituus - + Angle Kulma @@ -5356,7 +5359,7 @@ Note: C++ exporter is faster, but is not as featureful yet Sivujen lukumäärä - + Offset Siirtymä @@ -5436,7 +5439,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Etäisyys @@ -5710,22 +5713,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Yläpuoli - + Front Etupuoli - + Side Side - + Current working plane Current working plane @@ -5750,15 +5753,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6926,7 +6924,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6936,27 +6934,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7061,37 +7059,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7121,22 +7109,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Luo B-splini - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Mukautettu @@ -7246,12 +7234,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7271,7 +7259,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7490,6 +7478,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm index ae486bf80a..24ac056b84 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index 77883e5d5d..5f5ee23f72 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -1496,7 +1496,7 @@ mula sa kasangkapan menu-> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2866,20 +2866,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3356,6 +3342,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5216,12 +5219,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5270,7 +5273,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktibong command: - + None Wala @@ -5325,7 +5328,7 @@ Note: C++ exporter is faster, but is not as featureful yet Haba - + Angle Anggulo @@ -5370,7 +5373,7 @@ Note: C++ exporter is faster, but is not as featureful yet Bilang ng mga panig - + Offset Tabingi @@ -5450,7 +5453,7 @@ Note: C++ exporter is faster, but is not as featureful yet Magtanda - + Distance Distance @@ -5725,22 +5728,22 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. If checked, subelements will be modified instead of entire objects - + Top Tugatog - + Front Harap - + Side Side - + Current working plane Current working plane @@ -5765,15 +5768,10 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6941,7 +6939,7 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Flip dimension - + Stretch Stretch @@ -6951,27 +6949,27 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7076,37 +7074,27 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7136,22 +7124,22 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Lumikha ng B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Custom @@ -7261,12 +7249,12 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7286,7 +7274,7 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7505,6 +7493,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index a1ac969eae..95b0c9c661 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 1299d61094..f49afd24f3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -1114,12 +1114,12 @@ Utilisez 'arch' pour forcer la notation architecturale US If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Si ceci est vrai, cet objet n'inclura que des objets visibles This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Cet objet ne sera recalculé que si ceci est Vrai. @@ -1485,7 +1485,7 @@ from menu Tools -> Addon Manager Active/désactive l'Accrochage au Plan de Travail - + Unable to insert new object into a scaled part Impossible d'insérer un nouvel objet dans une pièce redimensionnée @@ -1638,7 +1638,7 @@ Le réseau peut être transformé en réseau polaire ou circulaire en changeant Créer un chanfrein - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La direction de décalage n'est pas définie. Veuillez d'abord déplacer la souris de chaque côté de l'objet pour indiquer une direction @@ -2078,12 +2078,12 @@ Doit être d’au moins 2. Draft_AddConstruction - + Add to Construction group Ajouter au groupe de Construction - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2853,20 +2853,6 @@ Vous pouvez également sélectionner trois sommets ou un Proxy de Plan de Travai Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Créer un proxy de plan de travail - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Crée un objet proxy à partir du plan de travail actuel. -Une fois que l'objet est créé, double-cliquez dessus dans l'arborescence pour restaurer la position de la caméra et la visibilité des objets. -Vous pouvez ensuite l'utiliser pour enregistrer une position différente de la caméra et l'état des objets à tout moment. - Draft_Shape2DView @@ -3343,6 +3329,23 @@ convertir les bords fermés en faces remplies et en polygones paramétriques, et Convertit une polyligne sélectionnée en B-spline, ou une B-spline en une polyligne. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Créer un proxy de plan de travail + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Crée un objet proxy à partir du plan de travail actuel. +Une fois que l'objet est créé, double-cliquez dessus dans l'arborescence pour restaurer la position de la caméra et la visibilité des objets. +Vous pouvez ensuite l'utiliser pour enregistrer une position différente de la caméra et l'état des objets à tout moment. + + Form @@ -4844,7 +4847,7 @@ Ceci permet de pointer la direction et d’entrer la distance. Set focus on Length instead of X coordinate - Définir l’accent sur la longueur plutôt que la coordonnée X + Mettre l’accent sur la longueur plutôt que la coordonnée X @@ -4896,12 +4899,12 @@ Notez que ce n'est pas entièrement supporté et que de nombreux objets ne seron Enable snap statusbar widget - Activer le widget d'aimantation dans la barre d'état + Activer le widget d'accrochage dans la barre d'état Draft snap widget - Widget d'aimantation Draft + Draft Widget d'aimantation @@ -5197,12 +5200,12 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon ImportDWG - + Conversion successful Conversion réussie - + Converting: Conversion en cours : @@ -5251,7 +5254,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon commande active : - + None Aucun @@ -5306,7 +5309,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon Longueur - + Angle Angle @@ -5351,7 +5354,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon Nombre de côtés - + Offset Décalage @@ -5431,7 +5434,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon Étiquette - + Distance Distance @@ -5698,22 +5701,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Si coché, les sous-éléments seront modifiés plutôt que les objets en entier - + Top Dessus - + Front Face - + Side Côté - + Current working plane Plan de travail actuel @@ -5738,15 +5741,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Appuyez sur ce bouton pour créer l'objet texte, ou terminez votre texte avec deux lignes vides - + Offset distance Distance de décalage - - - Trim distance - Distance de coupe - Change default style for new objects @@ -6914,7 +6912,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Inverser la direction de la cote - + Stretch Étirer @@ -6924,27 +6922,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Sélectionner un objet à étirer - + Pick first point of selection rectangle Choisir le premier point du rectangle de sélection - + Pick opposite point of selection rectangle Sélectionner le point oposé du rectangle de sélection - + Pick start point of displacement Choisir le point de départ du déplacement  - + Pick end point of displacement Choisir le point d’arrivée du déplacement  - + Turning one Rectangle into a Wire Transforme un Rectangle en un Filaire @@ -7049,37 +7047,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Sélectionner l'objet à réduire ou agrandir - + Pick distance Choisir la distance - - The offset distance - La distance de décalage - - - - The offset angle - L'angle de décalage - - - + Unable to trim these objects, only Draft wires and arcs are supported. Impossible d'ajuster ces objets, seuls les objets Draft filaires et arcs sont supportés. - + Unable to trim these objects, too many wires Impossible d'ajuster ces objets, trop de filaires - + These objects don't intersect. Ces objets ne se croisent pas. - + Too many intersection points. Trop de points d'intersection. @@ -7109,22 +7097,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Créer une B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Sélectionner une face, 3 sommets ou un Proxy WP pour définir le plan de dessin - + Working plane aligned to global placement of Plan de travail aligné sur le placement global de - + Dir Répertoire - + Custom Personnalisée @@ -7234,12 +7222,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Groupement automatique - + Add new Layer Ajouter un nouveau Calque - + Add to construction group Ajouter au groupe de construction @@ -7259,7 +7247,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Impossible de décaler ce type d’objet - + Offset of Bezier curves is currently not supported Le décalage des courbes de Bézier n'est actuellement pas pris en charge @@ -7477,6 +7465,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledLes formes sélectionnées doivent définir un plan + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 671cd1f1fd..7d9140dff9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index dba0ac619b..7cb4a77d62 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -1496,7 +1496,7 @@ dende menú de Ferramentas -> Xestión de complementos Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet comando activo: - + None Ningún @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet Lonxitude - + Angle Ángulo @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Número de lados - + Offset Separación @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etiqueta - + Distance Distance @@ -5718,22 +5721,22 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Se está marcado, sub elementos modificaranse no lugar de obxectos enteiros - + Top Enriba - + Front Fronte - + Side Lado - + Current working plane Actual plano de traballo @@ -5758,15 +5761,10 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6934,7 +6932,7 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Flip dimension - + Stretch Stretch @@ -6944,27 +6942,27 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7069,37 +7067,27 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7129,22 +7117,22 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Facer B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Personalizar @@ -7254,12 +7242,12 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Auto-xuntar - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7279,7 +7267,7 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7498,6 +7486,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index efa8271ac1..28361db69a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index a642da8637..ffd14529db 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -1513,7 +1513,7 @@ iz izbornika Alati-> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1666,7 +1666,7 @@ The array can be turned into a polar or a circular array by changing its type.Napravite žlijeb - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2119,12 +2119,12 @@ Mora biti najmanje 2. Draft_AddConstruction - + Add to Construction group Dodavanje grupe konstrukcije - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2894,20 +2894,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3384,6 +3370,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5279,12 +5282,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Pretvorba je uspješna - + Converting: Converting: @@ -5333,7 +5336,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktivna naredba: - + None Prazno @@ -5388,7 +5391,7 @@ Note: C++ exporter is faster, but is not as featureful yet Dužina - + Angle Kut @@ -5433,7 +5436,7 @@ Note: C++ exporter is faster, but is not as featureful yet Broj strana - + Offset Pomak @@ -5513,7 +5516,7 @@ Note: C++ exporter is faster, but is not as featureful yet Oznaka - + Distance Udaljenost @@ -5787,22 +5790,22 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Ako je označeno, pod-elementi će se mijenjati umjesto cijelih objekata - + Top Gore - + Front Ispred - + Side Strana - + Current working plane Aktualna radna ravnina @@ -5827,15 +5830,10 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Pritisnite ovaj gumb da biste stvorili tekstualni objekt ili dovršite tekst s dva prazna retka - + Offset distance Udaljenost pomaka - - - Trim distance - Udaljenost skraćivanja - Change default style for new objects @@ -7005,7 +7003,7 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Preokreni dimenziju - + Stretch Stretch @@ -7015,27 +7013,27 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7140,37 +7138,27 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7200,22 +7188,22 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Stvaranje B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Prilagođeno @@ -7325,12 +7313,12 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Automatska grupa - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7350,7 +7338,7 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7569,6 +7557,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 95b6d4a461..7b7541297d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index d3bb9db097..60c594e248 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -1121,12 +1121,12 @@ Használja az 'arch' kifejezést amerikai US arch jelölésének kikényszerít If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Ha ez igaz, akkor ez a tárgy csak látható tárgyelemeket tartalmaz This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Ez a tárgy csak akkor kerül újraszámításra, ha ez igaz. @@ -1494,7 +1494,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Be- és kikapcsolja a kényszerítést a munkasíkra - + Unable to insert new object into a scaled part Nem lehet új tárgyat beszúrni egy méretezett alkatrészbe @@ -1647,7 +1647,7 @@ Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megv Letörés létrehozása - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Az eltolás iránya nem meghatározott. Először mozgassa az egeret a tárgy egyik oldalára, hogy meghatározza az irányt @@ -2087,12 +2087,12 @@ Legalább 2-esnek kell lennie. Draft_AddConstruction - + Add to Construction group Hozzáadás az építési csoporthoz - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2861,20 +2861,6 @@ Három csúcspontot vagy egy munkasík proxyt is kijelölhet. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Munkasík proxy létrehozása - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Proxy tárgyat hoz létre az aktuális munkasíkból. -A tárgy létrehozása után kattintson rá duplán a fa nézetben a kamera helyzetének és a tárgy láthatóságának visszaállításához. -Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyakat állapotát bármikor, amikor akarja. - Draft_Shape2DView @@ -3350,6 +3336,23 @@ Egyesítheti például a kijelölt tárgyakat egyetlen tárgyba, vagy átalakít A kijelölt vonalláncot B-görbévé vagy egy B-görbét vonallánccá alakítja. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Munkasík proxy létrehozása + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Proxy tárgyat hoz létre az aktuális munkasíkból. +A tárgy létrehozása után kattintson rá duplán a fa nézetben a kamera helyzetének és a tárgy láthatóságának visszaállításához. +Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyakat állapotát bármikor, amikor akarja. + + Form @@ -5210,14 +5213,14 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionális ImportDWG - + Conversion successful Az átalakítás sikeres - + Converting: - Átváltás: + Konverzió: @@ -5264,7 +5267,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionálisaktív parancs: - + None Egyik sem @@ -5319,7 +5322,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionálisHossz - + Angle Szög @@ -5364,7 +5367,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionálisOldalak száma - + Offset Eltolás @@ -5444,7 +5447,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionálisFelirat - + Distance Távolság @@ -5718,22 +5721,22 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Ha be van jelölve, az al-elemek lesznek módosítva a teljes tárgy helyett - + Top Felülnézet - + Front Elölnézet - + Side Oldal - + Current working plane Jelenlegi munka sík @@ -5758,15 +5761,10 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Nyomja meg ezt a gombot a szöveges tárgy létrehozásához, vagy fejezze be a szöveget két üres vonallal - + Offset distance Eltolási távolság - - - Trim distance - Vágási távolság - Change default style for new objects @@ -6881,7 +6879,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Some subelements could not be scaled. - Egyes al elemeket nem lehetett méretezni. + Egyes al-elemeket nem lehetett méretezni. @@ -6916,7 +6914,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Create BezCurve - Béz-görbe létrehozás + Bézier-görbe létrehozás @@ -6934,7 +6932,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Méretek megfordítása - + Stretch Nyújtás @@ -6944,27 +6942,27 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Jelöljön ki egy tárgyat a nyújtáshoz - + Pick first point of selection rectangle Válassza ki az első pontot a téglalap kijelölésén - + Pick opposite point of selection rectangle Válassza ki a második pontot a téglalap kijelölésén - + Pick start point of displacement Elmozdulás kezdőpontjának kiválasztása - + Pick end point of displacement Elmozdulás végpontjának kiválasztása - + Turning one Rectangle into a Wire Egy téglalap átalakítása drótvázzá @@ -7069,37 +7067,27 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Válassza ki a tárgyakat a vágáshoz/nyújtáshoz - + Pick distance Távolság kiválasztása - - The offset distance - Eltolás távolsága - - - - The offset angle - Eltolás szöge - - - + Unable to trim these objects, only Draft wires and arcs are supported. Nem lehet vágni a tárgyakat, csak tervrajz vonalak és ívek támogatottak. - + Unable to trim these objects, too many wires Nem lehet ezeket a tárgyakat vágni, túl sok drótváz - + These objects don't intersect. Ezek az objektumok nem metszik egymást. - + Too many intersection points. Túl sok metszési pont. @@ -7129,22 +7117,22 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. B-görbe létrehozása - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Válasszon egy felületet, 3 csúcspontot vagy egy munkasík proxyt a rajzsík meghatározásához - + Working plane aligned to global placement of A globális elhelyezéshez igazított munkasík - + Dir Irány - + Custom Egyéni @@ -7254,12 +7242,12 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Autocsoport - + Add new Layer Új réteg hozzáadása - + Add to construction group Hozzáadás az építési csoporthoz @@ -7279,7 +7267,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Ez a tárgy típus nem tolható el - + Offset of Bezier curves is currently not supported Bézier görbe eltolás jelenleg még nem támogatott @@ -7498,6 +7486,11 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve A kijelölt alakzatoknak meg kell határozniuk egy síkot + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index bf94b1b72b..a3d10529ac 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index 0eea8e7b26..ebc61d3841 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -1494,7 +1494,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1647,7 +1647,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2087,12 +2087,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2863,20 +2863,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3353,6 +3339,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5210,12 +5213,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5264,7 +5267,7 @@ Note: C++ exporter is faster, but is not as featureful yet perintah aktif: - + None Tidak ada @@ -5319,7 +5322,7 @@ Note: C++ exporter is faster, but is not as featureful yet Panjangnya - + Angle Sudut @@ -5364,7 +5367,7 @@ Note: C++ exporter is faster, but is not as featureful yet Jumlah sisi - + Offset Mengimbangi @@ -5444,7 +5447,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5713,22 +5716,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Puncak - + Front Depan - + Side Side - + Current working plane Current working plane @@ -5753,15 +5756,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6929,7 +6927,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6939,27 +6937,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7064,37 +7062,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7124,22 +7112,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Buat B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Adat @@ -7249,12 +7237,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7274,7 +7262,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7493,6 +7481,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledBentuk terpilih harus mendefinisi bidang + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 047a629f8e..f48e3b27df 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index f517e2394e..1fbf8c691a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -1485,7 +1485,7 @@ dal menu Strumenti -> Addon Manager Attiva/Disattiva i vincoli al Piano di Lavoro - + Unable to insert new object into a scaled part Impossibile inserire il nuovo oggetto in una parte scalata @@ -1638,7 +1638,7 @@ La Serie può essere trasformata in una serie polare o circolare cambiandone il Crea smusso - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La direzione di Offset non è definita. Si prega di spostare il mouse su entrambi i lati dell'oggetto prima per indicare una direzione @@ -2078,12 +2078,12 @@ Deve essere almeno 2. Draft_AddConstruction - + Add to Construction group Aggiungi al gruppo Costruzione - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2853,20 +2853,6 @@ E' possibile anche selezionare tre vertici o un Piano di lavoro Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Crea piano di lavoro proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Crea un oggetto proxy dal piano di lavoro corrente. -Una volta creato fare doppio clic sulla vista ad albero per ripristinare la posizione della fotocamera e la visibilità degli oggetti. -Quindi lo si può usare per salvare una diversa posizione della fotocamera e gli stati degli oggetti ogni volta che serve. - Draft_Shape2DView @@ -3343,6 +3329,23 @@ convertire i bordi chiusi in facce piene e poligoni parametrici e unire le facce Converte una polilinea selezionata in una B-spline, o una B-spline in una polilinea. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Crea piano di lavoro proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Crea un oggetto proxy dal piano di lavoro corrente. +Una volta creato fare doppio clic sulla vista ad albero per ripristinare la posizione della fotocamera e la visibilità degli oggetti. +Quindi lo si può usare per salvare una diversa posizione della fotocamera e gli stati degli oggetti ogni volta che serve. + + Form @@ -5201,12 +5204,12 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< ImportDWG - + Conversion successful Conversione riuscita - + Converting: Conversione in corso: @@ -5255,7 +5258,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< comando attivo: - + None Nessuno @@ -5310,7 +5313,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< Lunghezza - + Angle Angolo @@ -5355,7 +5358,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< Numero di lati - + Offset Offset @@ -5435,7 +5438,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< Etichetta - + Distance Distanza @@ -5706,22 +5709,22 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Se selezionato, saranno modificati i sottoelementi invece degli oggetti completi - + Top Dall'alto - + Front Di fronte - + Side Lato - + Current working plane Piano di lavoro attuale @@ -5746,15 +5749,10 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Premere questo pulsante per creare l'oggetto di testo, o terminare il testo con due righe vuote - + Offset distance Distanza di offset - - - Trim distance - Distanza di taglio - Change default style for new objects @@ -6922,7 +6920,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Capovolgi quota - + Stretch Stira @@ -6932,27 +6930,27 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Selezionare un oggetto da stirare - + Pick first point of selection rectangle Specificare primo punto del rettangolo di selezione - + Pick opposite point of selection rectangle Specificare il punto opposto del rettangolo di selezione - + Pick start point of displacement Specificare punto iniziale dello spostamento - + Pick end point of displacement Specificare punto finale dello spostamento - + Turning one Rectangle into a Wire Convertire un Rettangolo in una Polilinea @@ -7057,37 +7055,27 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Seleziona gli oggetti da tagliare o estendere - + Pick distance Scegliere la distanza - - The offset distance - La distanza di offset - - - - The offset angle - L'angolo di offset - - - + Unable to trim these objects, only Draft wires and arcs are supported. Impossibile tagliare questi oggetti, sono supportati solo polilinee e archi di Draft. - + Unable to trim these objects, too many wires Impossibile tagliare questi oggetti, troppe polilinee - + These objects don't intersect. Questi oggetti non si intersecano. - + Too many intersection points. Troppi punti di intersezione. @@ -7117,22 +7105,22 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Scegliere una faccia, 3 vertici o un piano di lavoro proxy per definire il piano di disegno - + Working plane aligned to global placement of Piano di lavoro allineato al posizionamento globale di - + Dir Dir - + Custom Personalizza @@ -7242,12 +7230,12 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Auto-gruppo - + Add new Layer Aggiungi un nuovo Layer - + Add to construction group Aggiungi al gruppo Costruzione @@ -7267,7 +7255,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Non è possibile creare un offset con questo tipo di oggetto - + Offset of Bezier curves is currently not supported L'offset delle curve di Bezier non è attualmente supportato @@ -7485,6 +7473,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledLe forme selezionate devono definire un piano + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 9a7f922f86..6fb6c841b9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 38c628ad26..2de32c9965 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -1478,7 +1478,7 @@ from menu Tools -> Addon Manager 作業平面への拘束のオン/オフを切り替え - + Unable to insert new object into a scaled part 拡大縮小したパートに新しいオブジェクトを挿入できません。 @@ -1629,7 +1629,7 @@ X、Y、Zの軸の指定方向にコピーを並べます。 面取りを作成 - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction オフセット方向が定義されていません。最初にオブジェクトのどちらか一方にマウスを動かして方向を指定してください。 @@ -2069,12 +2069,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group 構築グループに追加 - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2838,20 +2838,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - 作業平面プロキシを作成 - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - 現在の作業平面からプロキシ・オブジェクトを作成します。 -オブジェクトを作成した後、ツリービュー上でダブルクリックするとカメラ位置とオブジェクトの表示状態が復元されます。 -これによって異なったカメラ位置とオブジェクトの状態を必要な時にいつでも保存することができます。 - Draft_Shape2DView @@ -3323,6 +3309,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces 選択したポリラインをB-スプラインに、またはB-スプラインをポリラインに変換します。 + + Draft_WorkingPlaneProxy + + + Create working plane proxy + 作業平面プロキシを作成 + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + 現在の作業平面からプロキシ・オブジェクトを作成します。 +オブジェクトを作成した後、ツリービュー上でダブルクリックするとカメラ位置とオブジェクトの表示状態が復元されます。 +これによって異なったカメラ位置とオブジェクトの状態を必要な時にいつでも保存することができます。 + + Form @@ -5167,12 +5170,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful 変換に成功しました - + Converting: Converting: @@ -5221,7 +5224,7 @@ Note: C++ exporter is faster, but is not as featureful yet アクティブコマンド: - + None なし @@ -5276,7 +5279,7 @@ Note: C++ exporter is faster, but is not as featureful yet 長さ - + Angle 角度 @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet 辺の数 - + Offset オフセット @@ -5401,7 +5404,7 @@ Note: C++ exporter is faster, but is not as featureful yet ラベル - + Distance 距離 @@ -5675,22 +5678,22 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた チェックされている場合、オブジェクト全体ではなくサブ要素が変更されます。 - + Top 上面図 - + Front 正面図 - + Side サイド - + Current working plane 現在の作業平面 @@ -5715,15 +5718,10 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた このボタンを押して、テキストオブジェクト作成するか、２行の空白行でテキストを終了します。 - + Offset distance オフセットの距離 - - - Trim distance - トリム距離 - Change default style for new objects @@ -6891,7 +6889,7 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた 寸法を反転 - + Stretch 伸縮 @@ -6901,27 +6899,27 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた 伸縮するオブジェクトを選択 - + Pick first point of selection rectangle 選択四角形の最初の点を選択 - + Pick opposite point of selection rectangle 選択四角形の対角点を選択 - + Pick start point of displacement 移動の始点を選択 - + Pick end point of displacement 移動の終点を選択 - + Turning one Rectangle into a Wire 1つの四角形をワイヤーへ変換 @@ -7026,37 +7024,27 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた トリムまたは伸縮するオブジェクトを選択 - + Pick distance 距離を選択 - - The offset distance - オフセット距離 - - - - The offset angle - オフセット角度 - - - + Unable to trim these objects, only Draft wires and arcs are supported. これらのオブジェクトをトリムすることはできません。サポートされているのはドラフトのワイヤーと円弧のみです。 - + Unable to trim these objects, too many wires これらのオブジェクトはワイヤーが多すぎてトリムすることができません。 - + These objects don't intersect. これらのオブジェクトは交差してません。 - + Too many intersection points. 交点が多すぎます。 @@ -7086,22 +7074,22 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた B-スプラインを作成 - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane 描画平面を定義する面、3つの頂点、またはWPプロキシを選択 - + Working plane aligned to global placement of 作業平面は以下のグローバル位置に配置されました： - + Dir Dir - + Custom カスタム設定 @@ -7211,12 +7199,12 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた オートグループ - + Add new Layer 新しいレイヤーを追加 - + Add to construction group 構築グループに追加 @@ -7236,7 +7224,7 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた この種類のオブジェクトはオフセットできません。 - + Offset of Bezier curves is currently not supported ベジェ曲線のオフセットは現在サポートされていません @@ -7455,6 +7443,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.qm b/src/Mod/Draft/Resources/translations/Draft_kab.qm index 07a7d30ab2..94be5f3105 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_kab.qm and b/src/Mod/Draft/Resources/translations/Draft_kab.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.ts b/src/Mod/Draft/Resources/translations/Draft_kab.ts index ccd344dd71..8b460ee886 100644 --- a/src/Mod/Draft/Resources/translations/Draft_kab.ts +++ b/src/Mod/Draft/Resources/translations/Draft_kab.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5215,12 +5218,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5269,7 +5272,7 @@ Note: C++ exporter is faster, but is not as featureful yet commande active : - + None Ula yiwen @@ -5324,7 +5327,7 @@ Note: C++ exporter is faster, but is not as featureful yet Longueur - + Angle Tiɣmeṛt @@ -5369,7 +5372,7 @@ Note: C++ exporter is faster, but is not as featureful yet Nombre de côtés - + Offset Offset @@ -5449,7 +5452,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5723,22 +5726,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Dessus - + Front Face - + Side Side - + Current working plane Current working plane @@ -5763,15 +5766,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6939,7 +6937,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6949,27 +6947,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7074,37 +7072,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7134,22 +7122,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Create B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Personnalisé @@ -7259,12 +7247,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7284,7 +7272,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7503,6 +7491,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index 0f4ad1c7b1..76cf795229 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index fad217b6f4..3f47f31892 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -644,7 +644,7 @@ This property is read-only, as the number depends on the points contained within Continuity - Continuity + 연속성 @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1558,7 +1558,7 @@ from menu Tools -> Addon Manager Create a clone - 복제하기 + 복제 @@ -1631,7 +1631,7 @@ The array can be turned into a polar or a circular array by changing its type. Fillet - 생성: 필렛(Fillet) + 필렛 @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet active command: - + None 없음 @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet 거리 - + Angle 각 @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Number of sides - + Offset Offset @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5720,22 +5723,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top 위 - + Front 전면 - + Side Side - + Current working plane Current working plane @@ -5760,15 +5763,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6936,7 +6934,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6946,27 +6944,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7071,37 +7069,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7131,22 +7119,22 @@ To enabled FreeCAD to download these libraries, answer Yes. 생성: B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom 색상 편집 @@ -7256,12 +7244,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7281,7 +7269,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7500,6 +7488,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm index 7244841b45..c7d1acb048 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index f14a24d291..3d9a59553c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -6,22 +6,22 @@ The start point of this line. - The start point of this line. + Šios tiesės pradžios taškas. The end point of this line. - The end point of this line. + Šios tiesės pabaigos taškas. The length of this line. - The length of this line. + Šios tiesės ilgis. Radius to use to fillet the corner. - Radius to use to fillet the corner. + Naudojamas spindulys kampo suapvalinimui. @@ -165,12 +165,12 @@ This property is read-only, as the number depends on the parameters of the array Radius to use to fillet the corners - Radius to use to fillet the corners + Naudojamas spindulys kampų suapvalinimui Size of the chamfer to give to the corners - Size of the chamfer to give to the corners + Nuosklembos plotis iki kampų @@ -1495,7 +1495,7 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1630,25 +1630,25 @@ The array can be turned into a polar or a circular array by changing its type. Fillet - Fillet + Kraštų suapvalinimas Creates a fillet between two selected wires or edges. - Creates a fillet between two selected wires or edges. + Užapvalina kampą tarp dviejų pasirinktų rėmelių ar kraštinių. Delete original objects - Delete original objects + Panaikinti pirminius kūnus Create chamfer - Create chamfer + Nusklembti - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2088,12 +2088,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2596,7 +2596,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Mirror - Mirror + Veidrodinė kopija @@ -2864,20 +2864,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3354,6 +3340,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5214,12 +5217,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5268,7 +5271,7 @@ Note: C++ exporter is faster, but is not as featureful yet atliekamas veiksmas: - + None Joks @@ -5323,7 +5326,7 @@ Note: C++ exporter is faster, but is not as featureful yet Length - + Angle Kampas @@ -5368,7 +5371,7 @@ Note: C++ exporter is faster, but is not as featureful yet Sienų skaičius - + Offset Offset @@ -5448,7 +5451,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5722,22 +5725,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Iš viršaus - + Front Iš priekio - + Side Side - + Current working plane Current working plane @@ -5762,15 +5765,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -5964,7 +5962,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Radius: - Radius: + Spindulys: @@ -5999,17 +5997,17 @@ To enabled FreeCAD to download these libraries, answer Yes. length: - length: + ilgis: Two elements are needed. - Two elements are needed. + Būtini du nariai. Radius is too large - Radius is too large + Spindulys per didelis @@ -6019,7 +6017,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Removed original objects. - Removed original objects. + Panaikinti pirminius kūnus. @@ -6840,7 +6838,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Mirror - Mirror + Veidrodinė kopija @@ -6938,7 +6936,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6948,27 +6946,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7073,37 +7071,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7133,22 +7121,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Nubrėžti B-splainą - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Pasirinktinė @@ -7185,52 +7173,52 @@ To enabled FreeCAD to download these libraries, answer Yes. Fillet radius - Fillet radius + Suapvalinimo spindulys Radius of fillet - Radius of fillet + Suapvalinimo spindulys Enter radius. - Enter radius. + Įveskite spindulio vertę. Delete original objects: - Delete original objects: + Panaikinti pirminius kūnus: Chamfer mode: - Chamfer mode: + Sklembimo būdas: Two elements needed. - Two elements needed. + Būtini du nariai. Test object - Test object + Tikrinamas daiktas Test object removed - Test object removed + Tikrinamas daiktas panaikintas Fillet cannot be created - Fillet cannot be created + Neįmanoma suapvalinti Create fillet - Užapvalinti kampą + Suapvalinti kampą @@ -7258,12 +7246,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7283,7 +7271,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7502,6 +7490,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index c79fd7632a..341abcd68e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 08ccbde2b8..8b179050d4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -1493,7 +1493,7 @@ vanuit het menu Tools -> Addon Manager Schakelt beperkingen aan naar werkvlak aan/uit - + Unable to insert new object into a scaled part Kan geen nieuw object in een verschaald deel plaatsen @@ -1646,7 +1646,7 @@ De reeks kan worden omgezet in een polair of een circulaire reeks door het type Afschuining maken - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset richting is niet gedefinieerd. Beweeg de muis aan een van de zijden van het object eerst om een richting aan te geven @@ -2086,12 +2086,12 @@ Het moet ten minste 2 zijn. Draft_AddConstruction - + Add to Construction group Toevoegen aan Constructiegroep - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2861,20 +2861,6 @@ U kunt ook een drietal hoekpunten of een werkvlak proxy selecteren. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Proxy voor werkvlak aanmaken - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Maakt een proxy-object aan van het huidige werk vlak. -Zodra het object is gemaakt, dubbelklik dan op het structuur scherm om de camera positie en de zichtbaarheid van de objecten te herstellen. -Dan kun je het gebruiken om een andere camerapositie en objecten op te slaan wanneer je nodig hebt. - Draft_Shape2DView @@ -3351,6 +3337,23 @@ Zet gesloten randen om in gevulde vlakken en parametrische veelhoeken en voeg vl Zet een geselecteerde polylijn om naar een B-spline, of een B-spline naar een polylijn. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Proxy voor werkvlak aanmaken + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Maakt een proxy-object aan van het huidige werk vlak. +Zodra het object is gemaakt, dubbelklik dan op het structuur scherm om de camera positie en de zichtbaarheid van de objecten te herstellen. +Dan kun je het gebruiken om een andere camerapositie en objecten op te slaan wanneer je nodig hebt. + + Form @@ -5207,12 +5210,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversie succesvol - + Converting: Converting: @@ -5261,7 +5264,7 @@ Note: C++ exporter is faster, but is not as featureful yet actieve opdracht: - + None Geen @@ -5316,7 +5319,7 @@ Note: C++ exporter is faster, but is not as featureful yet Lengte - + Angle Hoek @@ -5361,7 +5364,7 @@ Note: C++ exporter is faster, but is not as featureful yet Aantal zijden - + Offset Verschuiving @@ -5441,7 +5444,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Afstand @@ -5715,22 +5718,22 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Indien aangevinkt, worden subelementen gewijzigd in plaats van hele objecten - + Top Boven - + Front Voorkant - + Side Zijde - + Current working plane Huidig werkvlak @@ -5755,15 +5758,10 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Druk op deze knop om het tekstobject aan te maken of eindig uw tekst met twee lege regels - + Offset distance Verschuiving afstand - - - Trim distance - Trim afstand - Change default style for new objects @@ -6931,7 +6929,7 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Afmeting spiegelen - + Stretch Uitrekken @@ -6941,27 +6939,27 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Selecteer een object om uit te rekken - + Pick first point of selection rectangle Kies het eerste punt van de selectierechthoek - + Pick opposite point of selection rectangle Kies het tegenovergestelde punt van de selectierechthoek - + Pick start point of displacement Kies het startpunt van verplaatsing - + Pick end point of displacement Kies het eindpunt van verplaatsing - + Turning one Rectangle into a Wire Een rechthoek in een draad veranderen @@ -7066,37 +7064,27 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Selecteer objecten om te trimmen of uit te breiden - + Pick distance Kies afstand - - The offset distance - De verschuivings afstand - - - - The offset angle - De verschuif hoek - - - + Unable to trim these objects, only Draft wires and arcs are supported. Kan deze objecten niet trimmen, alleen Draft draden en bogen worden ondersteund. - + Unable to trim these objects, too many wires Kan deze objecten niet trimmen, te veel draden - + These objects don't intersect. Deze objecten doorsnijden elkaar niet. - + Too many intersection points. Te veel snijpunten. @@ -7126,22 +7114,22 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Maak B-spline aan - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Kies een vlak, 3 hoekpunten of een WP-Proxy om het tekenvlak te definiëren - + Working plane aligned to global placement of Werkvlak is afgestemd op de globale plaatsing van - + Dir Richting - + Custom Eigen @@ -7251,12 +7239,12 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Autogroeperen - + Add new Layer Nieuwe laag toevoegen - + Add to construction group Voeg toe aan constructiegroep @@ -7276,7 +7264,7 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Kan dit objecttype niet verschuiven - + Offset of Bezier curves is currently not supported Offset van Bezier-curves wordt momenteel niet ondersteund @@ -7495,6 +7483,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_no.qm b/src/Mod/Draft/Resources/translations/Draft_no.qm index b344ac85fd..5e8cc8cd31 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_no.qm and b/src/Mod/Draft/Resources/translations/Draft_no.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_no.ts b/src/Mod/Draft/Resources/translations/Draft_no.ts index cc678f666b..8498a295d5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_no.ts +++ b/src/Mod/Draft/Resources/translations/Draft_no.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktiv kommando: - + None Ingen @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet Lengde - + Angle Vinkel @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Antall sider - + Offset Avsetting @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Avstand @@ -5720,22 +5723,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Topp - + Front Front - + Side Side - + Current working plane Current working plane @@ -5760,15 +5763,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6936,7 +6934,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6946,27 +6944,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7071,37 +7069,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7131,22 +7119,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Create B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Egendefinert @@ -7256,12 +7244,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7281,7 +7269,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7500,6 +7488,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index ac584ba681..537ea5e1aa 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 1ff4a9b006..d681797421 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -326,7 +326,7 @@ the 'First Angle' and 'Last Angle' properties. Wartość pomiaru. Ta właściwość jest tylko do odczytu, ponieważ wartość jest obliczana z -właściwości „Pierwszy kąt” i „ostatni kąt”. +właściwości „Pierwszy kąt” i „Ostatni kąt”. @@ -349,7 +349,8 @@ Jest to lista ciągów; każdy element na liście będzie wyświetlany w osobnej End angle of the arc (for a full circle, give it same value as First Angle) - Końcowy kąt łuku (dla pełnego okręgu, daj taką samą wartość jak dla pierwszego kąta) + Kąt końcowy łuku (dla pełnego okręgu, + nadaj mu tę samą wartość co pierwszemu kątowi) @@ -811,7 +812,7 @@ W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginaln If Clones includes several objects, set True for fusion or False for compound Jeśli Klony zawierają kilka obiektów, -ustaw True dla połączenia lub False dla kombinacji +ustaw wartość Prawda dla utworzenia połączenia, lub Fałsz dla kształtu złożonego @@ -960,12 +961,12 @@ beyond the dimension line If it is true, the objects contained within this layer will adopt the line color of the layer - Jeśli to prawda, obiekty zawarte w tej warstwie przyjmą kolor linii warstwy + Jeśli parametr ma wartość Prawda, obiekty zawarte w tej warstwie przyjmą kolor linii warstwy If it is true, the print color will be used when objects in this layer are placed on a TechDraw page - Jeśli to prawda, kolor wydruku zostanie użyty, gdy obiekty w tej warstwie zostaną umieszczone na stronie TechDraw + Jeśli parametr ma wartość Prawda, wówczas przy umieszczaniu obiektów na tej warstwie strony Rysunek Techniczny zostanie użyty kolor wydruku @@ -1118,12 +1119,12 @@ Użyj "arch", aby wymusić notację architektoniczną amerykańską If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Jeśli parametr ma wartość Prawda, wówczas obiekt ten będzie zawierał tylko widoczne elementy This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Ten obiekt zostanie ponownie przeliczony tylko wtedy, gdy parametr ma wartość Prawda. @@ -1491,7 +1492,7 @@ z menu Przybory -> Menedżer dodatków Włącz / wyłącz wiązanie do płaszczyzny roboczej - + Unable to insert new object into a scaled part Nie można wstawić nowego obiektu do części skalowanej @@ -1644,7 +1645,7 @@ Tablicę można przekształcić w tablicę polarną lub okrągłą, zmieniając Utwórz fazkę - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Kierunek przesunięcia nie jest zdefiniowany. Proszę najpierw przesunąć kursor myszki po obu stronach obiektu, aby wskazać kierunek @@ -2081,12 +2082,12 @@ Musi wynosić co najmniej 2. Draft_AddConstruction - + Add to Construction group Dodaj do grupy konstrukcyjnej - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2445,7 +2446,7 @@ na obsługiwanych węzłach i na obsługiwanych obiektach. Facebinder - Grupa ścian + Łącznik kształtu @@ -2860,20 +2861,6 @@ Można również wybrać trzy wierzchołki lub przejściową płaszczyznę roboc Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Utwórz pośrednią płaszczyznę roboczą - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Tworzy obiekt przejściowy z bieżącej płaszczyzny roboczej. -Po utworzeniu obiektu kliknij go dwukrotnie w widoku drzewa, aby przywrócić pozycję ujęcia widoku i widoczność obiektów. -Następnie można go użyć do zapisania innej pozycji ujęcia widoku i stanów obiektów w dowolnie wybranym momencie. - Draft_Shape2DView @@ -3351,6 +3338,23 @@ CTRL do przyciągania, SHIFT aby związać. Konwertuje zaznaczoną polilinię do linii złożonej lub linie złozoną do polilinii. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Utwórz pośrednią płaszczyznę roboczą + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Tworzy obiekt przejściowy z bieżącej płaszczyzny roboczej. +Po utworzeniu obiektu kliknij go dwukrotnie w widoku drzewa, aby przywrócić pozycję ujęcia widoku i widoczność obiektów. +Następnie można go użyć do zapisania innej pozycji ujęcia widoku i stanów obiektów w dowolnie wybranym momencie. + + Form @@ -3943,7 +3947,7 @@ lub rodziny, jak np. "Arial, Helvetica, sans" lub nazwa w stylu np. "Arial: Bold Constrain mod - moduł Ograniczanie + Modyfikator ograniczania @@ -4104,7 +4108,7 @@ Domyślnie ustawiona jest na lewo, co jest standardem ISO. Always snap (disable snap mod) - Zawsze przyciągaj (wyłącz tryb przyciągania) + Zawsze przyciągaj (wyłącz modyfikator przyciągania) @@ -4234,7 +4238,7 @@ Domyślnie ustawiona jest na lewo, co jest standardem ISO. Fill objects with faces whenever possible - Wypełnij obiekt powierzchniami, gdy tylko możliwe + Wypełniaj obiekty powierzchniami, gdy tylko jest to możliwe @@ -4635,7 +4639,7 @@ Values with differences below this value will be treated as same. This value wil In-Command Shortcuts - Skróty poleceń + Skróty klawiszowe @@ -4730,7 +4734,7 @@ Values with differences below this value will be treated as same. This value wil Length - Długość + Odstęp @@ -4852,7 +4856,7 @@ Pozwala to wskazać kierunek i wprowadzić odległość. Set focus on Length instead of X coordinate - Ustaw ostrość na długość zamiast na współrzędną X + Ustaw aktywność na pole Długość zamiast na współrzędną X @@ -5211,12 +5215,12 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalny ImportDWG - + Conversion successful Konwersja zakończona - + Converting: Konwertowanie: @@ -5265,7 +5269,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalnyaktywne polecenie: - + None Brak @@ -5317,10 +5321,10 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalny Length - Długość + Odstęp - + Angle Kąt @@ -5365,7 +5369,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalnyLiczba boków - + Offset Odsunięcie @@ -5445,7 +5449,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalnyEtykieta - + Distance Odległość @@ -5650,7 +5654,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Filled - Wypełniony + Wypełnienie @@ -5718,22 +5722,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Jeśli ta opcja jest zaznaczona, modyfikowane będą elementy podrzędne, a nie całe obiekty - + Top Od góry - + Front Od przodu - + Side Strona - + Current working plane Bieżąca płaszczyzna robocza @@ -5758,15 +5762,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Naciśnij ten przycisk, aby utworzyć obiekt tekstowy, lub zakończ tekst dwiema pustymi liniami - + Offset distance Odległość przesunięcia - - - Trim distance - Odległość przycięcia - Change default style for new objects @@ -5815,7 +5814,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Found 2 objects: fusing them - Znaleziono 2 obiekty: łączenie ich + Znaleziono dwa obiekty: zostanie wykonane scalenie @@ -6934,7 +6933,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Odwróć wymiar - + Stretch Rozciągnij @@ -6944,27 +6943,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz obiekt do rozciągnięcia - + Pick first point of selection rectangle Wybierz pierwszy punkt ramki zaznaczenia - + Pick opposite point of selection rectangle Wybierz przeciwny punkt ramki zaznaczenia - + Pick start point of displacement Wybierz punkt początkowy przemieszczenia - + Pick end point of displacement Wybierz punkt końcowy przemieszczenia - + Turning one Rectangle into a Wire Przekształcanie jednego prostokąta w linię łamaną @@ -7069,37 +7068,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz obiekty do przycięcia lub wydłużenia - + Pick distance Wybierz odległość - - The offset distance - Odległość przesunięcia - - - - The offset angle - Kąt przesunięcia - - - + Unable to trim these objects, only Draft wires and arcs are supported. Nie można przyciąć tych obiektów, obsługiwane są tylko linie łamane i łuki. - + Unable to trim these objects, too many wires Nie można przyciąć tych obiektów, zbyt wiele linii łamanych - + These objects don't intersect. Te obiekty nie przecinają się. - + Too many intersection points. Zbyt wiele punktów przecięcia. @@ -7129,22 +7118,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Utwórz krzywą złożoną - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Wybierz płaszczyznę, 3 wierzchołki lub proxy WP, aby zdefiniować płaszczyznę rysowania - + Working plane aligned to global placement of Płaszczyzna robocza wyrównana względem globalnego umiejscowienia - + Dir Katalog - + Custom Niestandardowe @@ -7254,12 +7243,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Grupuj automatycznie - + Add new Layer Dodaj nową warstwę - + Add to construction group Dodaj do grupy konstrukcyjnej @@ -7279,7 +7268,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Nie można przesunąć tego typu obiektu - + Offset of Bezier curves is currently not supported Przesunięcie krzywych Beziera nie jest obecnie obsługiwane @@ -7414,7 +7403,7 @@ Należy usunąć zaznaczenie, aby używać układu współrzędnych płaszczyzny Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled Zaznacz, jeśli obiekt ma być wyświetlany jako wypełniony, w przeciwnym razie będzie wyświetlany jako szkielet. -Niedostępne, jeśli opcja preferencji Rysunku Roboczego "używaj elementów pierwotnych" jest włączona +Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj elementów pierwotnych" jest włączona @@ -7498,6 +7487,11 @@ Niedostępne, jeśli opcja preferencji Rysunku Roboczego "używaj elementów pie Wybrane kształty muszą definiować płaszczyznę + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 5ee8cc27bf..5421322d36 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 662407acea..42999c17c1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -1117,7 +1117,7 @@ Use 'arch' para forçar a notação de arco dos EUA If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Se isso for verdadeiro, este objeto incluirá apenas objetos visíveis @@ -1490,7 +1490,7 @@ no menu ferramentas-> Addon Manager Liga/desliga restrição de plano de trabalho - + Unable to insert new object into a scaled part Não foi possível inserir o novo objeto em uma peça dimensionada @@ -1643,7 +1643,7 @@ A rede pode ser transformada em uma rede polar ou circular alterando seu tipo.Criar chanfro - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Direção do deslocamento não definida. Por favor, mova o mouse de ambos os lados do objeto primeiro para indicar uma direção @@ -2079,12 +2079,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Adicionar ao grupo de construção - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2854,20 +2854,6 @@ Você também pode selecionar três vértices ou um proxy de plano de trabalho.< Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Criar um proxy de plano de trabalho - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Cria um objeto proxy a partir do plano de trabalho atual. -Uma vez que o objeto for criado, dê um clique duplo no ícone na árvore para restaurar a posição da câmera e a visibilidade dos objetos. -Você pode usá-lo para salvar uma posição diferente de câmera e estados de objetos sempre que precisar. - Draft_Shape2DView @@ -3343,6 +3329,23 @@ converter arestas fechadas em faces preenchidas e polígonos paramétricos, e me Converte uma polilinha selecionada em uma B-spline, ou uma B-spline em uma polilinha. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Criar um proxy de plano de trabalho + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Cria um objeto proxy a partir do plano de trabalho atual. +Uma vez que o objeto for criado, dê um clique duplo no ícone na árvore para restaurar a posição da câmera e a visibilidade dos objetos. +Você pode usá-lo para salvar uma posição diferente de câmera e estados de objetos sempre que precisar. + + Form @@ -5197,12 +5200,12 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos ainda ImportDWG - + Conversion successful Conversão bem sucedida - + Converting: Convertendo: @@ -5251,7 +5254,7 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos aindacomando ativo: - + None Nenhum @@ -5306,7 +5309,7 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos aindaComprimento - + Angle Ângulo @@ -5351,7 +5354,7 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos aindaNúmero de lados - + Offset Deslocamento @@ -5431,7 +5434,7 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos aindaRótulo - + Distance Distância @@ -5704,22 +5707,22 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Se marcado, os sub-elementos serão modificados em vez de todos os objetos - + Top Topo - + Front Frente - + Side Lateral - + Current working plane Plano de trabalho atual @@ -5744,15 +5747,10 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Pressione este botão para criar o objeto de texto, ou para terminar seu texto com duas linhas em branco - + Offset distance Distância de deslocamento - - - Trim distance - Distância de aparação - Change default style for new objects @@ -6920,7 +6918,7 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Inverter dimensão - + Stretch Esticar @@ -6930,27 +6928,27 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Selecione um objeto para esticar - + Pick first point of selection rectangle Primeiro ponto do retângulo de seleção - + Pick opposite point of selection rectangle Ponto oposto do retângulo de seleção - + Pick start point of displacement Escolha o ponto inicial do deslocamento - + Pick end point of displacement Escolha o ponto final do deslocamento - + Turning one Rectangle into a Wire Convertendo um retângulo em arame @@ -7055,37 +7053,27 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Selecione objetos para aparar/estender - + Pick distance Indique a distância - - The offset distance - A distância de deslocamento - - - - The offset angle - O ângulo de deslocamento - - - + Unable to trim these objects, only Draft wires and arcs are supported. Não é possível aparar estes objetos, somente arames e arcos são suportados. - + Unable to trim these objects, too many wires Não é possível aparar estes objetos: número de arames muito alto - + These objects don't intersect. Esses objetos não se cruzam. - + Too many intersection points. Número muito alto de pontos de interseção. @@ -7115,22 +7103,22 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Criar B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Escolha uma face, 3 vértices ou um proxy de plano de trabalho para definir o plano de desenho - + Working plane aligned to global placement of Plano de trabalho alinhado com a posição global de - + Dir Direção - + Custom Personalizado @@ -7240,12 +7228,12 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Auto-agrupar - + Add new Layer Adicionar uma nova camada - + Add to construction group Adicionar ao grupo de construção @@ -7265,7 +7253,7 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Não é possível gerar um deslocamento para esse tipo de objeto - + Offset of Bezier curves is currently not supported O deslocamento de curvas de Bézier não é suportado atualmente @@ -7482,6 +7470,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledAs Formas Selecionadas devem definir um plano + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index b7256fcdc0..eb279fcaa5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 254e1762bb..450b22bfcb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -1491,7 +1491,7 @@ from menu Tools -> Addon Manager Liga/desliga restringir ao plano de trabalho - + Unable to insert new object into a scaled part Não foi possível inserir novo objeto numa peça dimensionada @@ -1644,7 +1644,7 @@ A matriz pode ser transformada em polar numa matriz circular alterando seu tipo. Criar chanfro - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Direção do deslocamento não definida. Por favor, mova o rato de ambos os lados do primeiro objeto para indicar uma direção @@ -2084,12 +2084,12 @@ Deve ser pelo menos 2. Draft_AddConstruction - + Add to Construction group Adicionar ao grupo Construção - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2859,20 +2859,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Criar uma representação do plano de trabalho - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Cria um objeto representante a partir do plano de trabalho atual. -Uma vez o objeto criado, clique duas vezes no ícone na vista em árvore para restaurar a posição da câmara e a visibilidade dos objetos. -Então você pode usá-la para salvar uma posição diferente de câmara e estados de objetos sempre que precisar. - Draft_Shape2DView @@ -3349,6 +3335,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converte uma polilinha selecionada em uma B-spline, ou uma B-spline em uma polilinha. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Criar uma representação do plano de trabalho + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Cria um objeto representante a partir do plano de trabalho atual. +Uma vez o objeto criado, clique duas vezes no ícone na vista em árvore para restaurar a posição da câmara e a visibilidade dos objetos. +Então você pode usá-la para salvar uma posição diferente de câmara e estados de objetos sempre que precisar. + + Form @@ -3782,7 +3785,7 @@ value by using the [ and ] keys while drawing The space between the text and the dimension line - The space between the text and the dimension line + O espaçamento entre o texto e a linha de cotagem @@ -3792,7 +3795,7 @@ value by using the [ and ] keys while drawing The spacing between different lines of text - The spacing between different lines of text + O espaçamento entre diferentes linhas de texto @@ -5204,12 +5207,12 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completo ImportDWG - + Conversion successful Conversion successful - + Converting: Convertendo: @@ -5258,7 +5261,7 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completoComando ativo: - + None Nenhum @@ -5313,7 +5316,7 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completoComprimento - + Angle Ângulo @@ -5358,7 +5361,7 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completoNr. de Lados - + Offset Deslocamento paralelo @@ -5438,7 +5441,7 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completoRótulo - + Distance Distância @@ -5708,22 +5711,22 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. If checked, subelements will be modified instead of entire objects - + Top Topo - + Front Frente - + Side Side - + Current working plane Current working plane @@ -5748,15 +5751,10 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6924,7 +6922,7 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Flip dimension - + Stretch Stretch @@ -6934,27 +6932,27 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Transformando um retângulo em Traço @@ -7059,37 +7057,27 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Não é possível aparar estes objetos, somente traços e arcos do modo Draft são suportados. - + Unable to trim these objects, too many wires Não é possível aparar estes objetos, muitos traços - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7119,22 +7107,22 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Criar B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Personalizado @@ -7244,12 +7232,12 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Autoagrupar - + Add new Layer Adicionar nova camada - + Add to construction group Add to construction group @@ -7269,7 +7257,7 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7488,6 +7476,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledAs formas selecionadas devem definir um plano + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index 7e2ae4eab9..84c222aacb 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 9b8233e876..27d13129fc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -1492,7 +1492,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1645,7 +1645,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2085,12 +2085,12 @@ Trebuie să fie cel puțin 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2861,20 +2861,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3351,6 +3337,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5210,12 +5213,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversie reușită - + Converting: Converting: @@ -5264,7 +5267,7 @@ Note: C++ exporter is faster, but is not as featureful yet Comanda activă: - + None Niciunul @@ -5319,7 +5322,7 @@ Note: C++ exporter is faster, but is not as featureful yet Lungime - + Angle Unghi @@ -5364,7 +5367,7 @@ Note: C++ exporter is faster, but is not as featureful yet Numărul de laturi - + Offset Compensare @@ -5444,7 +5447,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etichetă - + Distance Distance @@ -5711,22 +5714,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Dacă este bifată, subelementele vor fi modificate în locul obiectelor întregi - + Top Partea de sus - + Front Din față - + Side Latura - + Current working plane Planul curent de lucru @@ -5751,15 +5754,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Apăsați acest buton pentru a crea obiectul text sau pentru a finaliza textul cu două linii goale - + Offset distance Distanță de decalare - - - Trim distance - Distanță de tăiere - Change default style for new objects @@ -6927,7 +6925,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6937,27 +6935,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7062,37 +7060,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7122,22 +7110,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Creează o Bspline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Personalizat @@ -7247,12 +7235,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogrup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7272,7 +7260,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7491,6 +7479,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index cf90922225..9c33c8926f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 78226f29a3..d59c269a4f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -1063,7 +1063,7 @@ beyond the dimension line Number of copies to create. - Number of copies to create. + Количество копий для создания. @@ -1073,7 +1073,7 @@ beyond the dimension line Fill letters with faces - Fill letters with faces + Заполнить буквы гранями @@ -1115,12 +1115,12 @@ Use 'arch' to force US arch notation If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Если значение = True, данный объект будет включать в себя только видимые объекты This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Данный объект будет пересчитан только если значение = True. @@ -1463,7 +1463,7 @@ from menu Tools -> Addon Manager Toggles Grid On/Off - Toggles Grid On/Off + Вкл/выкл Сетку @@ -1486,7 +1486,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Невозможно вставить новый объект в масштабированную деталь @@ -1543,7 +1543,7 @@ from menu Tools -> Addon Manager Pick from/to points - Pick from/to points + Выбрать точки от начала, до конца @@ -1595,7 +1595,7 @@ The array can be turned into an orthogonal or a circular array by changing its t Array tools - Инструменты массива + Инструменты для работы с массивами @@ -1639,29 +1639,29 @@ The array can be turned into a polar or a circular array by changing its type.Создать фаску - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Save style - Save style + Сохранить стиль Name of this new style: - Name of this new style: + Название текущего нового стиля: Name exists. Overwrite? - Name exists. Overwrite? + Указанное название уже существует. Перезаписать? Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Ошибка: модуль json не найден. Невзможно сохранить стиль @@ -2077,12 +2077,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Добавить в группу Конструкции - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2120,8 +2120,8 @@ It creates a construction group if it doesn't exist. Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. - Moves the selected objects to an existing group, or removes them from any group. -Create a group first to use this tool. + Перемещает выбранные объекты в существующую группу или удаляет их из любой группы. +Создайте группу, прежде чем использовать этот инструмент. @@ -2156,8 +2156,7 @@ Create a group first to use this tool. Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. - Creates a circular arc by a center point and a radius. -CTRL to snap, SHIFT to constrain. + Создает дугу по центральной точке и радиусу. CTRL для привязки, SHIFT для ограничения. @@ -2170,7 +2169,7 @@ CTRL to snap, SHIFT to constrain. Create various types of circular arcs. - Create various types of circular arcs. + Создает различные типы круговых дуг. @@ -2257,8 +2256,7 @@ CTRL to snap, SHIFT to constrain. Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. - Creates a circle (full circular arc). -CTRL to snap, ALT to select tangent objects. + Создает окружность (на основе дуги). CTRL для привязки, ALT для выбора касательной. @@ -2359,16 +2357,16 @@ to turn it into a 'Draft Dimension' object. Downgrade - Downgrade + Упрощающее Преобразование Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. - Downgrades the selected objects into simpler shapes. -The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. -For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. + Обращает выбранные объекты в более простые формы. +Результат операции зависит от типов объектов, которые могут быть обращены несколько раз подряд. +Например, команда преобразует выбранные полилинии в простейшие линии, грани и края. Также может вычесть грани. @@ -2417,9 +2415,9 @@ Use TechDraw Workbench instead for generating technical drawings. Edits the active object. Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - Edits the active object. -Press E or ALT+LeftClick to display context menu -on supported nodes and on supported objects. + Редактирует активный объект. +Нажмите E или ALT+щелчок левой кнопкой мыши для отображения контекстного меню +на поддерживаемых узлах и поддерживаемых объектах. @@ -2605,9 +2603,9 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. - Moves the selected objects from one base point to another point. -If the "copy" option is active, it will create displaced copies. -CTRL to snap, SHIFT to constrain. + Перемещает выделенные объекты из одной базовой точки в другую. +Если опция "Копировать" активна, то функция создаст смещенные копии. +CTRL для привязки, SHIFT для ограничения. @@ -2709,7 +2707,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Point array - Point array + Массив Точек @@ -2809,7 +2807,7 @@ CTRL to snap, SHIFT to constrain, ALT to copy. Select group - Select group + Выбрать группу @@ -2843,7 +2841,7 @@ You may also select a three vertices or a Working Plane Proxy. Set style - Set style + Установить стиль @@ -2853,20 +2851,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -2941,12 +2925,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Toggles Grid On/Off - Toggles Grid On/Off + Вкл/выкл Сетку Toggle Draft Grid - Toggle Draft Grid + Вкл/выкл сетку Draft @@ -3050,7 +3034,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Activates or deactivates all snap methods at once. - Activates or deactivates all snap methods at once. + Включает или отключает все привязки одновременно. @@ -3076,7 +3060,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Set snapping to the nearest point of an edge. - Set snapping to the nearest point of an edge. + Установить привязку к ближайшей точке кривой. @@ -3089,7 +3073,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Set snapping to a direction that is a multiple of 45 degrees from a point. - Set snapping to a direction that is a multiple of 45 degrees from a point. + Установите привязку по направлению, кратному 45 градусам от точки. @@ -3102,7 +3086,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Set snapping to a direction that is parallel to an edge. - Set snapping to a direction that is parallel to an edge. + Установите привязку параллельно кривой. @@ -3115,7 +3099,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Set snapping to a direction that is perpendicular to an edge. - Set snapping to a direction that is perpendicular to an edge. + Установите привязку перпендикулярно кривой. @@ -3170,7 +3154,7 @@ It works best when choosing a point on a straight segment and not a corner verte Stretch - Stretch + Растянуть @@ -3245,16 +3229,15 @@ This can be used to draw several objects one after the other in succession. Toggle normal/wireframe display - Toggle normal/wireframe display + Переключить нормальное/каркасное отображение Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. - Switches the display mode of selected objects from flatlines to wireframe and back. -This is helpful to quickly visualize objects that are hidden by other objects. -This is intended to be used with closed shapes and solids, and doesn't affect open wires. + Переключает режим отображения выбранных объектов с полноценного на каркасное и обратно, что позволяет быстро просмотреть объекты, скрытые за другими объектами. +Предназначено для использования с замкнутыми и целыми фигурами. Не оказывает никакого влияния на незамкнутые ломанные. @@ -3275,14 +3258,14 @@ This is intended to be used with closed shapes and solids, and doesn't affect op Trimex - Trimex + Укоротить / Растянуть Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. - Trims or extends the selected object, or extrudes single faces. -CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. + Укоротить или растянуть выбранный объект или сформировать отдельные грани. +CTRL привязка, SHIFT ограничивает текущий сегмент или нормаль, ALT инверсия. @@ -3303,7 +3286,7 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Upgrade - Upgrade + Усложняющее Преобразование @@ -3311,10 +3294,10 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. - Upgrades the selected objects into more complex shapes. -The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. -For example, it can join the selected objects into one, convert simple edges into parametric polylines, -convert closed edges into filled faces and parametric polygons, and merge faces into a single face. + Преобразует выбранные объекты в более сложные фигуры. +Результат операции зависит от типов объектов, которые могут быть обращены несколько раз подряд. +Например, он может объединить выбранные объекты в один объект, конвертировать простые ребра в полилинии, +преобразует близко расположенные ребра в грани и многоугольники, а так же объединяет несколько граней в одну. @@ -3335,7 +3318,7 @@ convert closed edges into filled faces and parametric polygons, and merge faces Wire to B-spline - Wire to B-spline + Ломаная в В-сплайн @@ -3343,6 +3326,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5186,12 +5186,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Конвертация прошла успешно - + Converting: Converting: @@ -5240,7 +5240,7 @@ Note: C++ exporter is faster, but is not as featureful yet Текущая команда: - + None Ничего @@ -5295,7 +5295,7 @@ Note: C++ exporter is faster, but is not as featureful yet Длина - + Angle Угол @@ -5340,7 +5340,7 @@ Note: C++ exporter is faster, but is not as featureful yet Количество сторон - + Offset Смещение @@ -5420,7 +5420,7 @@ Note: C++ exporter is faster, but is not as featureful yet Метка - + Distance Расстояние @@ -5693,22 +5693,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Если флажок установлен, то вместо целых объектов будут изменены дочерние элементы - + Top Сверху - + Front Спереди - + Side Сторона - + Current working plane Текущая рабочая плоскость @@ -5733,15 +5733,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Нажмите эту кнопку, чтобы создать текстовый объект, или закончите ввод текста двумя пустыми строками - + Offset distance Расстояние смещения - - - Trim distance - Расстояние обрезки - Change default style for new objects @@ -5900,7 +5895,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer No more downgrade possible - No more downgrade possible + Дальнейшее упрощение невозможно @@ -5955,12 +5950,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Face: True - Face: True + Грань: True Support: - Support: + Поддержка: @@ -5970,7 +5965,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer length: - length: + длина: @@ -6316,7 +6311,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Task panel: - Task panel: + Панель задач: @@ -6331,7 +6326,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Object: - Object: + Объект: @@ -6366,7 +6361,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Number of elements: - Number of elements: + Количество элементов: @@ -6376,17 +6371,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Center of rotation: - Center of rotation: + Центр вращения: Aborted: - Aborted: + Отменено: Number of layers must be at least 2. - Number of layers must be at least 2. + Количество слоёв должно быть не менее 2. @@ -6411,17 +6406,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Radial distance: - Radial distance: + Радиальное расстояние: Tangential distance: - Tangential distance: + Тангенциальное расстояние: Number of circular layers: - Number of circular layers: + Количество круговых слоев: @@ -6501,7 +6496,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Downgrade - Downgrade + Упрощающее Преобразование @@ -6521,7 +6516,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Ellipse - Create Ellipse + Создать Эллипс @@ -6531,12 +6526,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Line - Create Line + Создать Линию Create Wire - Create Wire + Создать Ломаную @@ -6551,7 +6546,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Convert to Wire - Convert to Wire + Преобразовать в Ломаную @@ -6566,7 +6561,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Selection is not a Knot - Selection is not a Knot + Выбранный элемент не является Узлом @@ -6596,7 +6591,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Dimension - Create Dimension + Указать размер @@ -6606,7 +6601,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Edges don't intersect! - Edges don't intersect! + Рёбра не пересекаются! @@ -6641,7 +6636,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Upgrade - Upgrade + Усложняющее Преобразование @@ -6656,12 +6651,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick start point - Pick start point + Указать начальную точку Pick end point - Pick end point + Указать конечную точку @@ -6671,7 +6666,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Point array - Point array + Массив Точек @@ -6686,7 +6681,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Construction mode - Construction mode + Режим построения @@ -6706,12 +6701,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Midpoint snap - Midpoint snap + Привязка к средним точкам Perpendicular snap - Perpendicular snap + Перпендикулярная привязка @@ -6721,27 +6716,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Intersection snap - Intersection snap + Привязка к точке пересечения Parallel snap - Parallel snap + Параллельная привязка Endpoint snap - Endpoint snap + Привязка к Конечным точкам Angle snap (30 and 45 degrees) - Angle snap (30 and 45 degrees) + Угловая привязка (30 и 45 градусов) Arc center snap - Arc center snap + Привязка к центру дуги @@ -6751,17 +6746,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Near snap - Near snap + Ближайшая привязка Orthogonal snap - Orthogonal snap + Ортогональная привязка Special point snap - Special point snap + Привязка к специальной точке @@ -6791,12 +6786,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick center point - Pick center point + Указать центральную точку Pick radius - Pick radius + Указать радиус @@ -6831,7 +6826,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Point - Create Point + Создать Точку @@ -6909,9 +6904,9 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Обратить размер - + Stretch - Stretch + Растянуть @@ -6919,27 +6914,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -6951,12 +6946,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Plane - Create Plane + Создать Плоскость Create Rectangle - Create Rectangle + Создать Прямоугольник @@ -6971,12 +6966,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Convert to Sketch - Convert to Sketch + Преобразовать в Эскиз Convert to Draft - Convert to Draft + Преобразовать в Draft @@ -6991,7 +6986,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Create Label - Create Label + Создать Надпись @@ -7016,7 +7011,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer : this object is not editable - : this object is not editable + : данный объект недоступен для редактирования @@ -7036,7 +7031,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Trimex - Trimex + Укоротить / Растянуть @@ -7044,39 +7039,29 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. - These objects don't intersect. + Данные объекты не пересекаются. - + Too many intersection points. - Too many intersection points. + Слишком много точек пересечения. @@ -7104,22 +7089,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Создать B-сплайн - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir - Dir + Направление - + Custom Дополнительно @@ -7151,7 +7136,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Split line - Split line + Разделить линию @@ -7166,7 +7151,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Enter radius. - Enter radius. + Ввести радиус. @@ -7186,12 +7171,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Test object - Test object + Тестовый объект Test object removed - Test object removed + Тестовый объект удален @@ -7211,17 +7196,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Change Style - Change Style + Изменить Стиль Add to group - Add to group + Добавить в группу Select group - Select group + Выбрать группу @@ -7229,12 +7214,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Автогруппировка - + Add new Layer - Add new Layer + Добавить новый Слой - + Add to construction group Add to construction group @@ -7254,7 +7239,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7306,7 +7291,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Arc by 3 points - Arc by 3 points + Дуга по 3 точкам @@ -7331,7 +7316,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick rotation center - Pick rotation center + Указать центр вращения @@ -7346,7 +7331,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick base angle - Pick base angle + Указать начальный угол @@ -7374,15 +7359,14 @@ The final angle will be the base angle plus this amount. Coordinates relative to last point or to coordinate system origin if is the first point to set - Coordinates relative to last point or to coordinate system origin -if is the first point to set + Координаты будут указаны относительно последней точки или относительно центра системы координат если это первая точка для установки. Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - Coordinates relative to global coordinate system. -Uncheck to use working plane coordinate system + Координаты будут указаны относительно центра глобальной системы координат. +Отключите, если хотите использовать систему координат рабочей плоскости @@ -7399,32 +7383,32 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Local u0394X - Local u0394X + Относительное u0394X Local u0394Y - Local u0394Y + Относительное u0394Y Local u0394Z - Local u0394Z + Относительное u0394Z Global u0394X - Global u0394X + Абсолютное u0394X Global u0394Y - Global u0394Y + Абсолютное u0394Y Global u0394Z - Global u0394Z + Абсолютное u0394Z @@ -7473,6 +7457,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA @@ -7489,7 +7478,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled successfully exported - successfully exported + успешно экспортировано diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.qm b/src/Mod/Draft/Resources/translations/Draft_sk.qm index d87d6eb184..c924923b5b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sk.qm and b/src/Mod/Draft/Resources/translations/Draft_sk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.ts b/src/Mod/Draft/Resources/translations/Draft_sk.ts index f8f18b5136..cbc71d6ac4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sk.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2084,12 +2084,12 @@ Musí byť aspoň 2. Draft_AddConstruction - + Add to Construction group Pridať do konštrukčnej skupiny - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2860,20 +2860,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3350,6 +3336,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5210,12 +5213,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5264,7 +5267,7 @@ Note: C++ exporter is faster, but is not as featureful yet aktívny príkaz: - + None Žiadny @@ -5319,7 +5322,7 @@ Note: C++ exporter is faster, but is not as featureful yet Dĺžka - + Angle Uhol @@ -5364,7 +5367,7 @@ Note: C++ exporter is faster, but is not as featureful yet Počet strán - + Offset Odsadenie @@ -5444,7 +5447,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Vzdialenosť @@ -5718,22 +5721,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Zhora - + Front Predok - + Side Side - + Current working plane Aktuálna pracovná rovina @@ -5758,15 +5761,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6934,7 +6932,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6944,27 +6942,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7069,37 +7067,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7129,22 +7117,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Vytvoriť B-krivku - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Custom @@ -7254,12 +7242,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Pridať do konštrukčnej skupiny @@ -7279,7 +7267,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Posun Bézierových kriviek nie je momentálne podporovaný @@ -7498,6 +7486,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 4ec97e3367..e6e51c786b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index b5820c744e..183233ba73 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -1118,12 +1118,12 @@ Use 'arch' to force US arch notation If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Če drži, potem bo ta predmet vključeval le vidne predmete This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Ta predmet bo preračunan le, če to drži. @@ -1491,7 +1491,7 @@ iz menija Orodja -> Upravljalnik vstavkov Preklopi omejitve na delovno ravnino Vklop / Izklop - + Unable to insert new object into a scaled part Novega predmeta ni mogoče vstaviti v prevelikosten del @@ -1643,7 +1643,7 @@ Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s sprememb Ustvari prisekanje - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Smer odmika ni določena. S premikom kazalke na eno stran predmeta najprej nakažite smer @@ -2083,12 +2083,12 @@ Morata biti najmanj dva. Draft_AddConstruction - + Add to Construction group Dodaj v skupino pomagal - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2856,20 +2856,6 @@ Izberete lahko tudi tri oglišča ali nadomestek Delavne ravnine. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Ustvari nadomestek delovne ravnine - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Ustvari iz trenutne delovne ravnine nadomestni predmet. -Ko je predmet enkrat ustvarjen, z dvoklikom nanj v drevesnem pogledu povrnete položaj kamere in vidnost predmetov. -Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih položajev kamere in stanj predmetov. - Draft_Shape2DView @@ -3346,6 +3332,23 @@ pretvori sklenjene robove v zapolnjene ploskve in določilovne mnogokotnike ter Pretvori izbrano črtovje v B-zlepek ali B-zlepek v črtovje. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Ustvari nadomestek delovne ravnine + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Ustvari iz trenutne delovne ravnine nadomestni predmet. +Ko je predmet enkrat ustvarjen, z dvoklikom nanj v drevesnem pogledu povrnete položaj kamere in vidnost predmetov. +Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih položajev kamere in stanj predmetov. + + Form @@ -5206,12 +5209,12 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnosti ImportDWG - + Conversion successful Pretvaranje uspelo - + Converting: Pretvarjanje: @@ -5260,7 +5263,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnostidejaven ukaz: - + None Brez @@ -5315,7 +5318,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnostiDolžina - + Angle Kot @@ -5360,7 +5363,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnostiŠtevilo strani - + Offset Odmik @@ -5440,7 +5443,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnostiOznaka - + Distance Distance @@ -5714,22 +5717,22 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Če je označeno, bodo namesto celotnega predmeta preoblikovane le podprvine - + Top Zgoraj - + Front Spredaj - + Side Stran - + Current working plane Trenutna delovna ravnina @@ -5754,15 +5757,10 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Pritisnite ta gumb, da ustvarite besedilni predmet ali zaključite besedilo z dvema praznima črtama - + Offset distance Velikost odmika - - - Trim distance - Dolžina prirezovanja - Change default style for new objects @@ -6930,7 +6928,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Obrni koto - + Stretch Raztegni @@ -6940,27 +6938,27 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite predmet za raztegovanje - + Pick first point of selection rectangle Izberite prvo točko izbirnega pravokotnika - + Pick opposite point of selection rectangle Izberite nasprotno točko izbirnega pravokotnika - + Pick start point of displacement Izberite začetno točko prestavljanja - + Pick end point of displacement Izberite končno točko prestavljanja - + Turning one Rectangle into a Wire Pretvori pravokotnik v črtovje @@ -7065,37 +7063,27 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite predmet(e) za prirezovanje/podaljšanje - + Pick distance Izberite razdaljo - - The offset distance - Razdalja odmika - - - - The offset angle - Kot odmika - - - + Unable to trim these objects, only Draft wires and arcs are supported. Teh predmetov ni mogoče prirezati, le črtovja osnutka in loki imajo to možnost. - + Unable to trim these objects, too many wires Ni mogoče prirezati teh predmetov, preveč črtovij - + These objects don't intersect. Ti predmeti se ne sekajo. - + Too many intersection points. Preveč presečišč. @@ -7125,22 +7113,22 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Ustvari B-zlepek - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Za določitev delavne ravnine izberite ploskev, 3 oglišča ali nadomestno DR - + Working plane aligned to global placement of Delovna ravnina priravna obči postavitivi - + Dir Mapa - + Custom Po meri @@ -7250,12 +7238,12 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Samodejno združevanje - + Add new Layer Dodaj novo plast - + Add to construction group Dodaj v skupino konstrukcije @@ -7275,7 +7263,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Te vrste predmeta ni mogoče odmikati - + Offset of Bezier curves is currently not supported Odmik Bezierjevih krivulj še vedno ni podprt @@ -7494,6 +7482,11 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike Izbrane oblike morajo tvoriti ravnino + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index 4f76acdb95..d195965ff8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 895cbe09e4..c4f43a2f20 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet активне команде: - + None Ниједан @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet Дужина - + Angle Угао @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet Број страна - + Offset Померај @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance Distance @@ -5720,22 +5723,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Горе - + Front Front - + Side Side - + Current working plane Current working plane @@ -5760,15 +5763,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6936,7 +6934,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Flip dimension - + Stretch Stretch @@ -6946,27 +6944,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7071,37 +7069,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7131,22 +7119,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Create B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Прилагођено @@ -7256,12 +7244,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7281,7 +7269,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7500,6 +7488,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 58a7ea2e1b..dfdf2572af 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 7990cce967..6022777040 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -1065,7 +1065,7 @@ beyond the dimension line Number of copies to create. - Number of copies to create. + Antalet kopior att skapa. @@ -1075,16 +1075,16 @@ beyond the dimension line Fill letters with faces - Fill letters with faces + Fyll bokstäver med ytor A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - A unit to express the measurement. -Leave blank for system default. -Use 'arch' to force US arch notation + En enhet för att uttrycka mätning. +Lämna tom för systemets standard. +Använd 'arch' för att påtvinga US arch-notering @@ -1491,7 +1491,7 @@ menyverktyg -> Insticksmodulshanterare Växlar Begränsning till arbetsplan på/av - + Unable to insert new object into a scaled part Kan inte infoga nytt objekt i en skalad del @@ -1643,7 +1643,7 @@ Matrisen kan förvandlas till en polär eller en cirkulär matris genom att änd Skapa avfasning - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Förskjutningsriktning är inte definierad. Flytta musen på ena sidan av objektet först för att indikera en riktning @@ -1655,17 +1655,17 @@ Matrisen kan förvandlas till en polär eller en cirkulär matris genom att änd Name of this new style: - Name of this new style: + Namnet på den här nya stilen: Name exists. Overwrite? - Name exists. Overwrite? + Namnet existerar. Skriva över? Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Fel: json-modul finns inte. Kunde inte spara stil @@ -2083,12 +2083,12 @@ Det måste vara minst 2. Draft_AddConstruction - + Add to Construction group Lägg till i Konstruktionsgrupp - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2854,20 +2854,6 @@ Du kan också välja tre hörn eller ett arbetsplan Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Skapa Arbetsplansproxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Skapar ett proxyobjekt från det nuvarande arbetsplanet. -När objektet har skapats dubbelklicka på det i trädvyn för att återställa kamerans position och objektens synlighet. -Då kan du använda den för att spara ett annat kameraläge och objekts tillstånd när du behöver. - Draft_Shape2DView @@ -3342,6 +3328,23 @@ Det förenar till exempel de utvalda objekten till en, omvandlar enkla kanter ti Konverterar en vald polylinje till en B-spline, eller en B-spline till en polylinje. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Skapa Arbetsplansproxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Skapar ett proxyobjekt från det nuvarande arbetsplanet. +När objektet har skapats dubbelklicka på det i trädvyn för att återställa kamerans position och objektens synlighet. +Då kan du använda den för att spara ett annat kameraläge och objekts tillstånd när du behöver. + + Form @@ -3745,12 +3748,12 @@ när man närmar sig musen. Du kan också ändra detta Load preset - Load preset + Ladda förval Save current style as a preset... - Save current style as a preset... + Spara nuvarande stil som ett förval... @@ -5181,7 +5184,7 @@ Detta värde är den maximala segmentlängden. G - G + G @@ -5194,12 +5197,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Konverteringen lyckades - + Converting: Konverterar: @@ -5248,7 +5251,7 @@ Note: C++ exporter is faster, but is not as featureful yet Aktivt kommando: - + None Inget @@ -5303,7 +5306,7 @@ Note: C++ exporter is faster, but is not as featureful yet Längd - + Angle Vinkel @@ -5348,7 +5351,7 @@ Note: C++ exporter is faster, but is not as featureful yet Antal sidor - + Offset Offset @@ -5428,7 +5431,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etikett - + Distance Distans @@ -5703,22 +5706,22 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Om detta är ikryssat kommer underelement modifieras istället för hela objekt - + Top Topp - + Front Front - + Side Sida - + Current working plane Nuvarande arbetsplan @@ -5743,15 +5746,10 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Tryck på den här knappen för att skapa textobjektet, eller avsluta din text med två tomma rader - + Offset distance Förskjutningsavstånd - - - Trim distance - Trimma avstånd - Change default style for new objects @@ -6919,7 +6917,7 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Växla riktning på dimension - + Stretch Töj ut @@ -6929,27 +6927,27 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Markera ett objekt att töja - + Pick first point of selection rectangle Välj första punkt för markeringsrektangel - + Pick opposite point of selection rectangle Välj motstående punkt för markeringsrektangel - + Pick start point of displacement Välj startpunkt för förflyttning - + Pick end point of displacement Välj slutpunkt för förflyttning - + Turning one Rectangle into a Wire Omvandlar en rektangel till en tråd @@ -7054,37 +7052,27 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Markera objekt att trimma/förlänga - + Pick distance Välj avstånd - - The offset distance - Förskjutningsavstånd - - - - The offset angle - Förskjutningsvinkeln - - - + Unable to trim these objects, only Draft wires and arcs are supported. Kan inte trimma dessa objekt, endast Draft-trådar och -cirkelbågar stöds. - + Unable to trim these objects, too many wires Kan inte trimma dessa objekt, för många trådar - + These objects don't intersect. Dessa objekt skär inte varandra. - + Too many intersection points. För många skärningspunkter. @@ -7114,22 +7102,22 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Skapa B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Välj en yta, 3 hörn eller ett arbetsplan Proxy för att definiera ritningsplanet - + Working plane aligned to global placement of Arbetsplan justerad till global placering av - + Dir Riktning - + Custom Anpassad @@ -7239,12 +7227,12 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Autogroup - + Add new Layer Lägg till nytt lager - + Add to construction group Lägg till i Konstruktionsgrupp @@ -7264,7 +7252,7 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Kan inte skapa förskjutning för denna objekttyp - + Offset of Bezier curves is currently not supported Förskjutning av bezierkurvor stöds inte för tillfället @@ -7409,42 +7397,42 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Local u0394X - Local u0394X + Lokal u0394X Local u0394Y - Local u0394Y + Lokal u0394Y Local u0394Z - Local u0394Z + Lokal u0394Z Global u0394X - Global u0394X + Global u0394X Global u0394Y - Global u0394Y + Global u0394Y Global u0394Z - Global u0394Z + Global u0394Z Autogroup: - Autogroup: + Gruppera automatiskt: Points: - Points: + Punkter: @@ -7454,12 +7442,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Unable to scale object: - Unable to scale object: + Kunde inte skala objekt: Unable to scale objects: - Unable to scale objects: + Kunde inte skala objekten: @@ -7483,6 +7471,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 5ea23b227c..0459ea4944 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index 1e99b8192e..5b78aec0f0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -1061,43 +1061,43 @@ dışındaki mesafesi The base object that will be duplicated. - The base object that will be duplicated. + A másolandó alap objektum. Number of copies to create. - Number of copies to create. + Oluşturulacak kopyaların sayısı. Rotation factor of the twisted array. - Rotation factor of the twisted array. + Bükülmüş dizi dönme etkeni. Fill letters with faces - Fill letters with faces + Harfleri yüzeyle doldur A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - A unit to express the measurement. -Leave blank for system default. -Use 'arch' to force US arch notation + Ölçümlendirmeyi gösterecek birim. +Sistem varsayılanı için boş bırakın. +BM mimari gösterimi için 'mimari' yi kullanın A list of exclusion points. Any edge touching any of those points will not be drawn. - A list of exclusion points. Any edge touching any of those points will not be drawn. + Hariç tutulan noktalar listesi. Bu noktaların herhangi birine değen hiçbir kenar çizilmeyecek. For Cutlines and Cutfaces modes, this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location + Kesme Hatları ve Kesme Yüzeyleri kipleri için, + bu, yüzleri kesme konumunda bırakır @@ -1109,22 +1109,22 @@ Use 'arch' to force US arch notation If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + Eğer bu Doğru olarak belirtilmişse, sadece katı geometri işlenir. Bu durum, temel nesnenin Sadece Katılar özelliği üzerine yazılır If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Eğer bu Doğru olarak belirtilmişse, uygulanabilmesi durumunda, içerik kesit düzlemi sınırlarına kırpılır. Bu durum, temel nesnenin Kırpık özelliği üzerine yazılır If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Eğer bu Doğru ise bu nesne sadece görünür nesneler içerecek This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Bu nesne, sadece bu değişken Doğru olarak belirtilirse yeniden hesaplanacak. @@ -1492,7 +1492,7 @@ menüden Araçlar -> Eklenti Yöneticisi Çalışma Düzlemine Kısıtlamayı Açma / Kapatma - + Unable to insert new object into a scaled part Ölçeklenmiş bir parçaya yeni nesne eklenemez @@ -1645,34 +1645,34 @@ Dizi, türü değiştirilerek kutupsal veya dairesel bir diziye dönüştürüle Pah oluştur - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Ofset yönü tanımlanmadı. Bir yönü belirtmek için lütfen fareyi nesnenin her iki yanında hareket ettirin Save style - Save style + Biçimi kaydet Name of this new style: - Name of this new style: + Yeni biçimin ismi: Name exists. Overwrite? - Name exists. Overwrite? + Bu isim kullanılıyor. Üzerine yazılsın mı? Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Hata: json modülü bulunamadı. Biçim kaydedilemedi Warning - Warning + Uyarı @@ -2085,12 +2085,12 @@ En az 2 olmalıdır. Draft_AddConstruction - + Add to Construction group Yapı grubuna ekle - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2218,7 +2218,7 @@ Dizi oluşturulduktan sonra, özellikleri ve türü B-spline - B-spline + B-Şerit @@ -2824,10 +2824,9 @@ CTRL to snap, SHIFT to constrain, ALT to copy. If the selection is a simple object inside a group, it will select the "brother" objects, that is, those that are at the same level as this object, including the upper group that contains them all. - If the selection is a group, it selects all objects that are inside this group, including those in nested sub-groups. + Seçim bir grupsa, bu grup ve içi içe geçmiş alt gruplardaki tüm nesneler seçilir. -If the selection is a simple object inside a group, it will select the "brother" objects, that is, -those that are at the same level as this object, including the upper group that contains them all. +Eğer seçim bir grup içindeki basit bir nesneyse, "kardeş" nesneleri, yani hepsini içeren üst grup dahil olmak üzere bu nesneyle aynı düzeyde olanları seçecektir. @@ -2860,20 +2859,6 @@ Ayrıca üç köşe veya bir Çalışma Düzlemi Proxy'si de seçebilirsiniz. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Çalışma Düzlemi Proxy'si Oluştur - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Mevcut çalışma düzleminden bir proxy (vekil) nesnesi oluşturur. -Nesne oluşturulduktan sonra, kamera konumunu ve nesnelerin görünürlüğünü geri yüklemek için ağaç görünümünde nesneye çift tıklayın. -Ardından, ihtiyacınız olan her an farklı bir kamera konumunu ve nesnelerin durumlarını kaydetmek için kullanabilirsiniz. - Draft_Shape2DView @@ -3350,6 +3335,23 @@ kapalı kenarları dolgulu yüzlere ve parametrik çokgenlere dönüştürün ve Seçili bir çoklu çizgiyi bir B-spline'a veya bir B-spline'ı bir çoklu çizgiye dönüştürür. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Çalışma Düzlemi Proxy'si Oluştur + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Mevcut çalışma düzleminden bir proxy (vekil) nesnesi oluşturur. +Nesne oluşturulduktan sonra, kamera konumunu ve nesnelerin görünürlüğünü geri yüklemek için ağaç görünümünde nesneye çift tıklayın. +Ardından, ihtiyacınız olan her an farklı bir kamera konumunu ve nesnelerin durumlarını kaydetmek için kullanabilirsiniz. + + Form @@ -3749,22 +3751,22 @@ sırasında değiştirebilirsiniz Fills the values below with a stored style preset - Fills the values below with a stored style preset + Aşağıdaki değerleri kayıtlı bir biçim hazır ayarı ile doldurur Load preset - Load preset + Hazır ayar yükle Save current style as a preset... - Save current style as a preset... + Geçerli biçimi hazır ayar olarak kaydet... Apply above style to selected object(s) - Apply above style to selected object(s) + Biçimi, seçilen nesne(ler) üzerine uygula @@ -3774,7 +3776,7 @@ sırasında değiştirebilirsiniz Texts/dims - Texts/dims + Metinler/ölçüler @@ -3784,7 +3786,7 @@ sırasında değiştirebilirsiniz The space between the text and the dimension line - The space between the text and the dimension line + Metin ve ölçü çizgisi arasındaki boşluk @@ -3794,7 +3796,7 @@ sırasında değiştirebilirsiniz The spacing between different lines of text - The spacing between different lines of text + Metnin farklı satırları arasındaki boşluk @@ -5199,21 +5201,21 @@ Bu değer, maksimum parça uzunluğudur. Python exporter is used, otherwise the newer C++ is used. Note: C++ exporter is faster, but is not as featureful yet - Python exporter is used, otherwise the newer C++ is used. -Note: C++ exporter is faster, but is not as featureful yet + Python dışa aktarıcı, yoksa daha yeni C ++ kullanılır. +Not: C ++ içe aktarıcı daha hızlıdır, ancak henüz o kadar özellikli değildir ImportDWG - + Conversion successful Dönüştürme başarılı - + Converting: - Converting: + Dönüştürülüyor: @@ -5260,7 +5262,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etkin söz dizisi: - + None Hiçbiri @@ -5315,7 +5317,7 @@ Note: C++ exporter is faster, but is not as featureful yet Uzunluk - + Angle Açı @@ -5360,7 +5362,7 @@ Note: C++ exporter is faster, but is not as featureful yet Yüzlerin sayısı - + Offset Uzaklaşma @@ -5440,7 +5442,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etiket - + Distance Uzaklık @@ -5714,22 +5716,22 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın İşaretlenirse, nesnelerin tamamı yerine alt öğeler değiştirilir - + Top üst - + Front Ön - + Side Yan - + Current working plane Mevcut çalışma düzlemi @@ -5754,15 +5756,10 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Metin nesnesini oluşturmak veya metninizi iki boş satırla bitirmek için bu düğmeye basın - + Offset distance Öteleme mesafesi - - - Trim distance - Kırpma mesafesi - Change default style for new objects @@ -6930,7 +6927,7 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Ölçüyü ters çevir - + Stretch Uzat @@ -6940,27 +6937,27 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Uzatmak için bir nesne seçin - + Pick first point of selection rectangle Seçim dikdörtgeninin ilk noktasını seçin - + Pick opposite point of selection rectangle Seçim dikdörtgeninin karşıt noktasını seçin - + Pick start point of displacement Yer değiştirme başlangıç noktasını seçin - + Pick end point of displacement Yer değiştirme bitiş noktasını seçin - + Turning one Rectangle into a Wire Dikdörtgeni bir Tele Dönüştür @@ -7065,37 +7062,27 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Kırpılacak veya uzatılacak nesneleri seçin - + Pick distance Mesafe seçin - - The offset distance - Öteleme mesafesi - - - - The offset angle - Öteleme açısı - - - + Unable to trim these objects, only Draft wires and arcs are supported. Bu nesneler kırpılamaz, yalnızca Taslak teller ve yaylar desteklenir. - + Unable to trim these objects, too many wires Bu nesneler kırplılamıyor, teller çok fazla - + These objects don't intersect. Bu nesneler kesişmiyor. - + Too many intersection points. Çok fazla çakışma noktası. @@ -7125,22 +7112,22 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın B-spline'ı yarat - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Çizim düzlemini tanımlamak için bir yüzey, 3 nokta veya bir WP Proxy seçin - + Working plane aligned to global placement of Global yerleşime hizalanmış çalışma düzlemi - + Dir Yön - + Custom Özel @@ -7250,12 +7237,12 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Otogrup - + Add new Layer Yeni Katman Ekle - + Add to construction group Yapı grubuna ekle @@ -7275,7 +7262,7 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Bu nesne türünü ötelenemez - + Offset of Bezier curves is currently not supported Bezier eğrilerinin ötelenmesi şu anda desteklenmiyor @@ -7402,8 +7389,8 @@ if is the first point to set Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - Coordinates relative to global coordinate system. -Uncheck to use working plane coordinate system + Koordinatlar, küresel koordinat sistemine bağlıdır. Çalışma +düzlemi koordinat sistemini kullanmak için işareti kaldırın @@ -7420,80 +7407,85 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Local u0394X - Local u0394X + Yerel u0394X Local u0394Y - Local u0394Y + Yerel u0394Y Local u0394Z - Local u0394Z + Yerel u0394Z Global u0394X - Global u0394X + Küresel u0394X Global u0394Y - Global u0394Y + Küresel u0394Y Global u0394Z - Global u0394Z + Küresel u0394Z Autogroup: - Autogroup: + Oto-grup: Points: - Points: + Noktalar: Placement: - Placement: + Yerleşim: Unable to scale object: - Unable to scale object: + Nesne ölçeklendirilemiyor: Unable to scale objects: - Unable to scale objects: + Nesneler ölçeklendirilemiyor: Too many objects selected, max number set to: - Too many objects selected, max number set to: + Çok fazla nesne seçili, maksimum sayı şuna ayarlanıyor: mirrored - mirrored + yansıtılmış Cannot generate shape: - Cannot generate shape: + Şekil oluşturulamıyor: Selected Shapes must define a plane - Selected Shapes must define a plane + Seçilen Şekiller bir düzlem belirtmelidir + + + Offset angle + Offset angle + importOCA @@ -7510,7 +7502,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled successfully exported - successfully exported + başarıyla dışa aktarıldı diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 5f22a2cdb7..57791000bf 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index 20a57d3231..d345037459 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -718,8 +718,8 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. - Orient the copies along the path depending on the 'Align Mode'. -Otherwise the copies will have the same orientation as the original Base object. + Розташуйте копії по контуру залежно від 'Режиму вирівнювання'. +В іншому випадку копії матимуть однакову орієнтацію, як оригінальний базовий об'єкт. @@ -769,27 +769,27 @@ Otherwise the copies will have the same orientation as the original Base object. Linked faces - Linked faces + Зв'язані поверхні Specifies if splitter lines must be removed - Specifies if splitter lines must be removed + Вказує, чи потрібно видаляти роздільні лінії An optional extrusion value to be applied to all faces - An optional extrusion value to be applied to all faces + Необов’язкове значення видавлювання, яке застосовується до всіх граней An optional offset value to be applied to all faces - An optional offset value to be applied to all faces + Необов’язкове значення видавлювання, яке застосовується до всіх граней This specifies if the shapes sew - This specifies if the shapes sew + Це визначає, чи фігури зшиті @@ -913,7 +913,7 @@ Write '$dim' so that it is replaced by the dimension length. The number of decimals to show - The number of decimals to show + Показати кількість десяткових знаків @@ -933,14 +933,14 @@ Write '$dim' so that it is replaced by the dimension length. Rotate the dimension arrows 180 degrees - Rotate the dimension arrows 180 degrees + Поверніть розмірні стрілки на 180 градусів The distance the dimension line is extended past the extension lines - The distance the dimension line is extended -past the extension lines + Відстань розмірної лінії продовжено +за лініями розширення @@ -962,42 +962,42 @@ beyond the dimension line If it is true, the objects contained within this layer will adopt the line color of the layer - If it is true, the objects contained within this layer will adopt the line color of the layer + Якщо це обрано, об'єкту, що містяться в цьому шарі, матимуть кольори ліній цього шару If it is true, the print color will be used when objects in this layer are placed on a TechDraw page - If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + Якщо це обрано, то друкуватиметься колір коли об’єкти в цьому шарі розміщеному на сторінці Креслення The line color of the objects contained within this layer - The line color of the objects contained within this layer + Колір лінії об'єкта, що міститься в цьому шарі The shape color of the objects contained within this layer - The shape color of the objects contained within this layer + Колір форми об'єктів, що міститься в цьому шарі The line width of the objects contained within this layer - The line width of the objects contained within this layer + Колір лінії об'єкта, що міститься в цьому шарі The draw style of the objects contained within this layer - The draw style of the objects contained within this layer + Стиль малювання об’єктів, що містяться в цьому шарі The transparency of the objects contained within this layer - The transparency of the objects contained within this layer + Прозорість об'єктів, що міститься в цьому шарі The line color of the objects contained within this layer, when used on a TechDraw page - The line color of the objects contained within this layer, when used on a TechDraw page + Колір лінії об'єктів, що міститься в цьому шарі, при використанні сторінки TechDraw @@ -1057,7 +1057,7 @@ beyond the dimension line Display a leader line or not - Display a leader line or not + Показати виносну лінію чи ні @@ -1084,14 +1084,14 @@ beyond the dimension line A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - A unit to express the measurement. -Leave blank for system default. -Use 'arch' to force US arch notation + Одиниця виміру. +Залиште пустим для системи за замовчуванням. +Використовуйте 'арку', щоб змусити позначення арки США A list of exclusion points. Any edge touching any of those points will not be drawn. - A list of exclusion points. Any edge touching any of those points will not be drawn. + Список виняткових точок. Будь-яке ребра, торкаючись будь-якого з цих точок, не буде намальовано. @@ -1103,28 +1103,28 @@ Use 'arch' to force US arch notation Length of line segments if tessellating Ellipses or B-splines into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments + Довжина відрізків ліній, якщо фрагментувати еліпси або B-сплайни +на відрізки лінії If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + Якщо це Істина, обробляється лише суцільна геометрія. Це замінює властивість Тільки твердих тіл базового об'єкта If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Якщо це Істина, вміст відсікається до меж площини перерізу, якщо це можливо. Це замінює властивість Обрізки базового об'єкта If this is True, this object will include only visible objects - If this is True, this object will include only visible objects + Якщо це Обрано цей об'єкт буде включати лише видимі об'єкти This object will be recomputed only if this is True. - This object will be recomputed only if this is True. + Цей об'єкт буде переобчислено лише за умови Обрано. @@ -1132,7 +1132,7 @@ Use 'arch' to force US arch notation Annotation Styles Editor - Annotation Styles Editor + Редактор стилів анотації @@ -1142,12 +1142,12 @@ Use 'arch' to force US arch notation Add new... - Add new... + Додати новий... Renames the selected style - Renames the selected style + Перейменовує вибрані стилі @@ -1157,7 +1157,7 @@ Use 'arch' to force US arch notation Deletes the selected style - Deletes the selected style + Видаляє вибраний стиль @@ -1177,7 +1177,7 @@ Use 'arch' to force US arch notation Line spacing - Line spacing + Інтервал @@ -1187,7 +1187,7 @@ Use 'arch' to force US arch notation The font to use for texts and dimensions - The font to use for texts and dimensions + Шрифт для використання в текстах та розмірах @@ -1197,22 +1197,22 @@ Use 'arch' to force US arch notation Scale multiplier - Scale multiplier + Множник масштабу Decimals - Decimals + Десяткові знаки Unit override - Unit override + Задати величину Show unit - Show unit + Показати величини @@ -1227,7 +1227,7 @@ Use 'arch' to force US arch notation Extension overshoot - Extension overshoot + Розширення перекриття @@ -1242,12 +1242,12 @@ Use 'arch' to force US arch notation Dimension overshoot - Dimension overshoot + Перевищення розміру Extension lines - Extension lines + Виноски @@ -1262,7 +1262,7 @@ Use 'arch' to force US arch notation The width of the dimension lines - The width of the dimension lines + Ширина розмірних ліній @@ -1272,7 +1272,7 @@ Use 'arch' to force US arch notation The color of dimension lines, arrows and texts - The color of dimension lines, arrows and texts + Колір розмірних ліній, стрілок та тексту @@ -1287,72 +1287,72 @@ Use 'arch' to force US arch notation Tick - Tick + Позначка The name of your style. Existing style names can be edited. - The name of your style. Existing style names can be edited. + Назва вашого стилю. Існуючі назви стилів можна редагувати. Font size in the system units - Font size in the system units + Розмір шрифту в системних одиницях Line spacing in system units - Line spacing in system units + Інтервал між рядками в системних одиницях A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + Фактор мультиплікатора, що впливає на розмір текстів і маркерів The number of decimals to show for dimension values - The number of decimals to show for dimension values + Кількість десяткових знаків для відображення для значень виміру Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Вкажіть припустиму одиницю довжини, як mm, in, ft, щоб примусово відобразити значення розміру в цих одиницях If it is checked it will show the unit next to the dimension value - If it is checked it will show the unit next to the dimension value + Якщо це позначено, він покаже одиницю виміру поряд із значенням розміру The distance that the extension lines are additionally extended beyond the dimension line - The distance that the extension lines are additionally extended beyond the dimension line + Відстань, на яку продовжуються додаткові лінії за межами розмірної лінії The size of the dimension arrows or markers in system units - The size of the dimension arrows or markers in system units + Розмір стрілок розміру або маркерів в системних одиницях If it is checked it will display the dimension line - If it is checked it will display the dimension line + Якщо позначено, то відобразиться розмірна лінія The distance that the dimension line is additionally extended - The distance that the dimension line is additionally extended + Відстань, на яку розташована лінія розміру додатково продовжена The length of the extension lines - The length of the extension lines + Довжина виносних ліній The type of arrows or markers to use at the end of dimension lines - The type of arrows or markers to use at the end of dimension lines + Тип стрілок чи міток для використання в кінці ліній розміру @@ -1362,7 +1362,7 @@ Use 'arch' to force US arch notation Tick-2 - Tick-2 + Тік-2 @@ -1382,9 +1382,9 @@ Use 'arch' to force US arch notation Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager - Download of dxf libraries failed. -Please install the dxf Library addon manually -from menu Tools -> Addon Manager + Помилка завантаження бібліотек dxf +Будь ласка, встановіть бібліотеку dxf вручну +з меню Інструменти -> Менеджер додатків @@ -1404,7 +1404,7 @@ from menu Tools -> Addon Manager Draft utility tools - Draft utility tools + Інструменти утиліту креслення @@ -1419,12 +1419,12 @@ from menu Tools -> Addon Manager &Modification - &Modification + &Зміна &Utilities - &Utilities + &Утиліти @@ -1439,12 +1439,12 @@ from menu Tools -> Addon Manager Point object doesn't have a discrete point, it cannot be used for an array. - Point object doesn't have a discrete point, it cannot be used for an array. + Об’єкт точки не має перервану точку, його не можна використати для масиву. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Закрита з тією ж першою/останньою точкою. Геометрія не оновилася. @@ -1454,47 +1454,47 @@ from menu Tools -> Addon Manager Writing objects shown/hidden state - Writing objects shown/hidden state + Запис об’єктів показати/приховати стан Merge layer duplicates - Merge layer duplicates + Об'єднати дублікати шарів Add new layer - Add new layer + Додати новий шар Toggles Grid On/Off - Toggles Grid On/Off + Увімкнути/вимкнути сітку Object snapping - Object snapping + Прив'язка до об'єктів Toggles Visual Aid Dimensions On/Off - Toggles Visual Aid Dimensions On/Off + Вмикати розміри видимої пропозиції Toggles Ortho On/Off - Toggles Ortho On/Off + Вкл./викл Орто Toggles Constrain to Working Plane On/Off - Toggles Constrain to Working Plane On/Off + Перемикає обмеження в робочій площині Вкл/Викл - + Unable to insert new object into a scaled part - Unable to insert new object into a scaled part + Не вдалося вставити новий об'єкт в масштабовану частину @@ -1544,12 +1544,12 @@ from menu Tools -> Addon Manager Modify subelements - Modify subelements + Змінити піделементи Pick from/to points - Pick from/to points + Оберіть від/до точки @@ -1569,7 +1569,7 @@ from menu Tools -> Addon Manager Circular array - Circular array + Круговий масив @@ -1577,15 +1577,15 @@ from menu Tools -> Addon Manager creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. - Creates copies of the selected object, and places the copies in a radial pattern -creating various circular layers. + Створює копії обраного об'єкту і розміщує копії у радіальному нарисі +створення різних круглих шарів. -The array can be turned into an orthogonal or a polar array by changing its type. +Масив може бути перетворений на ортогональний або полярний масив шляхом зміни його типу. Polar array - Polar array + Полярний масив @@ -1593,10 +1593,10 @@ The array can be turned into an orthogonal or a polar array by changing its type defined by a center of rotation and its angle. The array can be turned into an orthogonal or a circular array by changing its type. - Creates copies of the selected object, and places the copies in a polar pattern -defined by a center of rotation and its angle. + Створює копії обраного об'єкту і розміщує копії в полярному візерунку +визначеному за центром обертання та його кута. -The array can be turned into an orthogonal or a circular array by changing its type. +Масив може бути перетворений на ортогональний або круговий масив шляхом зміни його типу. @@ -1606,7 +1606,7 @@ The array can be turned into an orthogonal or a circular array by changing its t Create various types of arrays, including rectangular, polar, circular, path, and point - Create various types of arrays, including rectangular, polar, circular, path, and point + Створюйте різні типи масивів, включаючи прямокутні, полярні, кругові, контури та точки @@ -1619,10 +1619,10 @@ The array can be turned into an orthogonal or a circular array by changing its t meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. - Creates copies of the selected object, and places the copies in an orthogonal pattern, -meaning the copies follow the specified direction in the X, Y, Z axes. + Створює копії обраного об'єкту та розміщує копії за ортогональною схемою, +значення копій йдуть у вказаному напрямку в осі X, Y, Z. -The array can be turned into a polar or a circular array by changing its type. +Масив може бути перетворений на полярний або круговий масив шляхом зміни його типу. @@ -1632,12 +1632,12 @@ The array can be turned into a polar or a circular array by changing its type. Creates a fillet between two selected wires or edges. - Creates a fillet between two selected wires or edges. + Створює скруглення між двома вибраними каркасом або ребром. Delete original objects - Delete original objects + Видалити початкові об'єкти @@ -1645,29 +1645,29 @@ The array can be turned into a polar or a circular array by changing its type.Створити фаску - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + Напрямок зміщення не визначено. Будь ласка, перемістіть курсор миші на обидві сторони об'єкта спочатку для вказівки напрямку Save style - Save style + Зберегти стиль Name of this new style: - Name of this new style: + Назва нового стилю: Name exists. Overwrite? - Name exists. Overwrite? + Назва вже існує. Перезаписати? Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Помилка: модуль json не знайдено. Неможливо зберегти стиль @@ -1680,19 +1680,19 @@ The array can be turned into a polar or a circular array by changing its type. Circular array - Circular array + Круговий масив The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Координати точки, через яку проходить вісь обертання. +Змініть напрямок вісі в редакторі властивостей. Center of rotation - Center of rotation + Центр обертання @@ -1712,7 +1712,7 @@ Change the direction of the axis itself in the property editor. Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. + Скинути координати центру обертання. @@ -1723,8 +1723,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Якщо цей прапорець установлено, то об’єкти, що відображаються у масиві, будуть склеєні при торканні. +Це працює лише при вимкненому "масиві посилання". @@ -1735,30 +1735,30 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Якщо цей прапорець встановлений, кінцевий об'єкт буде "масив посилання" замість звичайного масиву. +Масив посилань є більш ефективним при створенні декількох копій, але його не можна об'єднати. Link array - Link array + Масив посилань Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. - Distance from one element in one ring of the array to the next element in the same ring. -It cannot be zero. + Відстань від одного елементу масиву до одного елементу масиву до наступного елементу у тому ж округленні. +Він не може бути нулем. Tangential distance - Tangential distance + Дотична відстань Distance from one layer of objects to the next layer of objects. - Distance from one layer of objects to the next layer of objects. + Відстань від одного шару об'єктів до наступного шару об'єктів. @@ -1768,19 +1768,19 @@ It cannot be zero. The number of symmetry lines in the circular array. - The number of symmetry lines in the circular array. + Число симетричних ліній в круговому масиві. Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. - Number of circular layers or rings to create, including a copy of the original object. -It must be at least 2. + Кількість кругових шарів або кілець для створення, включаючи копію вихідного об’єкта. +Його має бути не менше 2. Number of circular layers - Number of circular layers + Кількість циклічних шарів @@ -1790,7 +1790,7 @@ It must be at least 2. (Placeholder for the icon) - (Placeholder for the icon) + (Бланк для піктограми) @@ -1812,7 +1812,7 @@ Negative values will result in copies produced in the negative direction. Z intervals - Z intervals + Z інтервали @@ -1832,7 +1832,7 @@ Negative values will result in copies produced in the negative direction. Reset the distances. - Reset the distances. + Скинути відстань. @@ -1843,8 +1843,8 @@ Negative values will result in copies produced in the negative direction. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Якщо цей прапорець установлено, то об’єкти, що відображаються у масиві, будуть склеєні при торканні. +Це працює лише при вимкненому "масиві посилання". @@ -1855,18 +1855,18 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Якщо цей прапорець встановлений, кінцевий об'єкт буде "масив посилання" замість звичайного масиву. +Масив посилань є більш ефективним при створенні декількох копій, але його не можна об'єднати. Link array - Link array + Масив посилань (Placeholder for the icon) - (Placeholder for the icon) + (Бланк для піктограми) @@ -1892,14 +1892,14 @@ Negative values will result in copies produced in the negative direction.Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Y direction. -Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Відстань між елементами у напрямку Y. +Зазвичай необхідне лише значення Y; Інші два значення можуть дати додатковий зсув у відповідних напрямках. +Негативні значення призведуть до створення копій у негативному напрямку. Y intervals - Y intervals + Y інтервали @@ -1924,19 +1924,19 @@ The number must be at least 1 in each direction. Polar array - Polar array + Полярний масив The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Координати точки, через яку проходить вісь обертання. +Змініть напрямок вісі в редакторі властивостей. Center of rotation - Center of rotation + Центр обертання @@ -1956,7 +1956,7 @@ Change the direction of the axis itself in the property editor. Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. + Скинути координати центру обертання. @@ -1967,8 +1967,8 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Якщо цей прапорець установлено, то об’єкти, що відображаються у масиві, будуть склеєні при торканні. +Це працює лише при вимкненому "масиві посилання". @@ -1979,22 +1979,22 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Якщо цей прапорець встановлений, кінцевий об'єкт буде "масив посилання" замість звичайного масиву. +Масив посилань є більш ефективним при створенні декількох копій, але його не можна об'єднати. Link array - Link array + Масив посилань Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. - Sweeping angle of the polar distribution. -A negative angle produces a polar pattern in the opposite direction. -The maximum absolute value is 360 degrees. + Кут розгортки полярного розподілу. +Негативний кут створює полярний малюнок у протилежному напрямку. +Максимальне абсолютне значення - 360 градусів. @@ -2005,8 +2005,8 @@ The maximum absolute value is 360 degrees. Number of elements in the array, including a copy of the original object. It must be at least 2. - Number of elements in the array, including a copy of the original object. -It must be at least 2. + Кількість елементів у масиві включно із копією початкового об'єкту. +Кількість елементів має бути принаймні 2. @@ -2016,7 +2016,7 @@ It must be at least 2. (Placeholder for the icon) - (Placeholder for the icon) + (Бланк для піктограми) @@ -2069,7 +2069,7 @@ It must be at least 2. Enter coordinates or select point with mouse. - Enter coordinates or select point with mouse. + Введіть координати або виберіть точку з мишкою. @@ -2085,12 +2085,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Додати до групи Будівництво - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2104,7 +2104,7 @@ It creates a construction group if it doesn't exist. Add point - Add point + Додати точку @@ -2137,7 +2137,7 @@ Create a group first to use this tool. Annotation styles... - Annotation styles... + Стилі анотації... @@ -2150,7 +2150,7 @@ Create a group first to use this tool. Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. - Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. + Застосовує поточний стиль, визначений в панелі інструментів (ширина та кольори) до вибраних об'єктів і груп. @@ -2194,10 +2194,10 @@ CTRL для прив'язки, SHIFT для обмеження. By default, it is a 2x2 orthogonal array. Once the array is created its type can be changed to polar or circular, and its properties can be modified. - Creates an array from a selected object. -By default, it is a 2x2 orthogonal array. -Once the array is created its type can be changed -to polar or circular, and its properties can be modified. + Створює масив із вибраного об’єкта. +За замовчуванням це ортогональний масив 2x2. +Після створення масиву його тип можна змінити +До полярного або кругового, і його властивості можна змінювати. @@ -2223,7 +2223,7 @@ to polar or circular, and its properties can be modified. Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. - Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. + Створює багатоточковий B-сплайн. CTRL для прив'язки, SHIFT для обмеження. @@ -2246,7 +2246,7 @@ CTRL для прив'язки, SHIFT для обмеження. Bezier tools - Bezier tools + Інструменти для побудови кривої Безьє @@ -2280,8 +2280,8 @@ CTRL для прив'язки, ALT для вибору дотичного обʼ Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. - Creates a clone of the selected objects. -The resulting clone can be scaled in each of its three directions. + Створює клон обраних об'єктів. +Отриманий клон можна масштабувати в кожному з цих трьох напрямків. @@ -2294,7 +2294,7 @@ The resulting clone can be scaled in each of its three directions. Closes the line being drawn, and finishes the operation. - Closes the line being drawn, and finishes the operation. + Закриває креслення та завершує операцію. @@ -2309,9 +2309,9 @@ The resulting clone can be scaled in each of its three directions. Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. - Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. -After the curve is created you can go back to edit each control point and set the properties of each knot. -CTRL to snap, SHIFT to constrain. + Створює криву Безьє з двох градусів (квадратичний) та 3-х градусів (кубічних) сегментів. Натисніть і потягніть для визначення кожного відрізку. +Після створення кривої ви зможете повернутися до редагування кожної контрольної точки і встановити властивості кожного вузла. +CTRL для створення знімків, SHIFT для обмеження. @@ -2324,7 +2324,7 @@ CTRL to snap, SHIFT to constrain. Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. + Видаляє точку з існуючої Ламаної або B-сплайну. @@ -2348,18 +2348,18 @@ You may select a single line or single circular arc before launching this comman to create the corresponding linked dimension. You may also select an 'App::MeasureDistance' object before launching this command to turn it into a 'Draft Dimension' object. - Creates a dimension. + Створює вимір, -- Pick three points to create a simple linear dimension. -- Select a straight line to create a linear dimension linked to that line. -- Select an arc or circle to create a radius or diameter dimension linked to that arc. -- Select two straight lines to create an angular dimension between them. -CTRL to snap, SHIFT to constrain, ALT to select an edge or arc. +- Вибрати 3 точки, щоб створити простий лінійний вимір. +- Вибрати пряму лінію для створення лінійного виміру, що пов'язана з цією лінією. +- Вибрати дугу або коло, щоб створити радіус або розмір діаметру, пов'язаний з цією дугою. +- Вибрати дві прямі лінії, щоб створити кутовий вимір між ними. +CTRL для прив'язки, SHIFT до обмеження, ALT для вибору краю або дуги. -You may select a single line or single circular arc before launching this command -to create the corresponding linked dimension. -You may also select an 'App::MeasureDistance' object before launching this command -to turn it into a 'Draft Dimension' object. +Ви можете обрати один рядок, або один круговий дуга перед початком цієї команди +для створення відповідного пов'язаного виміру. +Ви також можете вибрати об'єкт 'Програма:MeasureDistance' перед запуском цієї команди +щоб перетворити її в об'єкт 'Встановіть величину креслення'. @@ -2374,9 +2374,9 @@ to turn it into a 'Draft Dimension' object. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. - Downgrades the selected objects into simpler shapes. -The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. -For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. + Знижує обрані об'єкти у простіші форми. +Результат операції залежить від типів об'єктів, які можуть бути понижені кілька разів поспіль. +Наприклад, він вибухає обрані полілінії до простіших поверхонь, сітки і потім країв. Також можна віднімати поверхні. @@ -2384,16 +2384,16 @@ For example, it explodes the selected polylines into simpler faces, wires, and t Draft to Sketch - Draft to Sketch + Креслення в Ескіз Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. - Convert bidirectionally between Draft objects and Sketches. -Many Draft objects will be converted into a single non-constrained Sketch. -However, a single sketch with disconnected traces will be converted into several individual Draft objects. + Конвертувати двонаправлено між об'єктами чернетками і ескізами. +Багато об'єктів з чернеток будуть конвертовані в єдиний необмежений ескіз. +Тим не менш, єдиний ескіз із роз'єднаними слідами буде перетворено на кілька об'єктів Draft для кожного об'єкта. @@ -2408,9 +2408,9 @@ However, a single sketch with disconnected traces will be converted into several Creates a 2D projection on a Drawing Workbench page from the selected objects. This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17. Use TechDraw Workbench instead for generating technical drawings. - Creates a 2D projection on a Drawing Workbench page from the selected objects. -This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17. -Use TechDraw Workbench instead for generating technical drawings. + Створює 2D проекцію на сторінці креслення з вибраного об'єкту. +Ця команда є OBSOLETE так як робочий простір малювання став застарілим в 0. 7. +Використовуйте TechDraw Workbench натомість для створення технічних креслень. @@ -2425,9 +2425,9 @@ Use TechDraw Workbench instead for generating technical drawings. Edits the active object. Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - Edits the active object. -Press E or ALT+LeftClick to display context menu -on supported nodes and on supported objects. + Редагує активний об'єкт. +Натисніть E або ALT+LeftClick щоб відобразити контекстне меню +на підтримуваних вузлах та на підтримуваних об'єктах. @@ -2480,8 +2480,8 @@ on supported nodes and on supported objects. Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. - Flip the normal direction of the selected dimensions (linear, radial, angular). -If other objects are selected they are ignored. + Переверніть перпендикулярний напрямок вибраних розмірів (лінійний, радіальний, кутовий). +Якщо вибрано інші об’єкти, вони ігноруються. @@ -2496,9 +2496,9 @@ If other objects are selected they are ignored. Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. - Heal faulty Draft objects saved with an earlier version of the program. -If an object is selected it will try to heal that object in particular, -otherwise it will try to heal all objects in the active document. + Виправити дефектні проекти, збережені в попередній версії програми. +Якщо об’єкт вибрано, він намагатиметься зцілити цей об’єкт, зокрема, +Інакше він спробує виправити всі об’єкти в активному документі. @@ -2512,8 +2512,8 @@ otherwise it will try to heal all objects in the active document. Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. - Joins the selected lines or polylines into a single object. -The lines must share a common point at the start or at the end for the operation to succeed. + Об’єднує позначені лінії або полілінії в один об'єкт. +Рядки повинні бути розділені спільною точкою початку або в кінці для досягнення операції. @@ -2534,15 +2534,15 @@ if any. If many objects or many subelements are selected, only the first one in each case will be used to provide information to the label. - Creates a label, optionally attached to a selected object or subelement. + Створює етикетку, необов'язково прикріплену до обраного об'єкту чи піделементу. -First select a vertex, an edge, or a face of an object, then call this command, -and then set the position of the leader line and the textual label. -The label will be able to display information about this object, and about the selected subelement, -if any. +Спочатку виберіть вершину, ребро або поверхню об'єкта, а потім назвіть цю команду, +А потім поставили позицію виносної лінії та текстової мітки. +Етикетки зможуть відображати інформацію про цей об'єкт і про вибрану допоміжну інформацію, +якщо така є яка. -If many objects or many subelements are selected, only the first one in each case -will be used to provide information to the label. +Якщо вибрано багато об'єктів або багато субелементів, тільки перший у кожному випадку +буде використовуватись для надання інформації мітці. @@ -2556,8 +2556,8 @@ will be used to provide information to the label. Adds a layer to the document. Objects added to this layer can share the same visual properties such as line color, line width, and shape color. - Adds a layer to the document. -Objects added to this layer can share the same visual properties such as line color, line width, and shape color. + Додає шар до документа. +Об'єкти додані до цього шару можуть використовувати такі ж візуальні властивості, як колір лінії, ширина та колір фігури. @@ -2570,7 +2570,7 @@ Objects added to this layer can share the same visual properties such as line co Creates a 2-point line. CTRL to snap, SHIFT to constrain. - Creates a 2-point line. CTRL to snap, SHIFT to constrain. + Створює криву Безьє. CTRL для притягування, SHIFT для обмеження. @@ -2578,14 +2578,14 @@ Objects added to this layer can share the same visual properties such as line co LinkArray - LinkArray + Масив Посилань Like the Array tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. - Like the Array tool, but creates a 'Link array' instead. -A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Як і інструмент масиву, але натомість створює масив посилань. +При обробці багатьох копій «посилання більш ефективний, але не вдалося використати параметр «Fuse». @@ -2598,7 +2598,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Mirrors the selected objects along a line defined by two points. - Mirrors the selected objects along a line defined by two points. + Віддзеркалити обрані об'єкти вздовж лінії, яка визначена двома точками. @@ -2613,9 +2613,9 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. - Moves the selected objects from one base point to another point. -If the "copy" option is active, it will create displaced copies. -CTRL to snap, SHIFT to constrain. + Переміщує вибрані об'єкти з однієї точки до іншої точки. +Якщо опція "копіювання" активна, вона створить переміщені копії. +CTRL для прив'язки, SHIFT для обмеження. @@ -2630,9 +2630,9 @@ CTRL to snap, SHIFT to constrain. Offsets of the selected object. It can also create an offset copy of the original object. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. - Offsets of the selected object. -It can also create an offset copy of the original object. -CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + Зсув вибраного об'єкта. +Він також може створити копію зсуву оригінального об’єкта. +CTRL для створення знімків, SHIFT для обмеження. Утримуйте ALT та натисніть га об'єкт, щоб створити нову копію з кожним кліком. @@ -2640,16 +2640,16 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each Path array - Path array + Шлях масиву Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. - Creates copies of the selected object along a selected path. -First select the object, and then select the path. -The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. + Створює копії обраного об'єкту вздовж обраної траєкторії. +Спочатку виберіть об'єкт та виберіть шлях. +Шлях може бути багатолінійним, B-сплайном, кривою Безьє або навіть ребра інших об'єктів. @@ -2657,7 +2657,7 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj Path Link array - Path Link array + Траєкторія масиву посилань @@ -2861,20 +2861,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Створити проксі робочої площини - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -2949,7 +2935,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Toggles Grid On/Off - Toggles Grid On/Off + Увімкнути/вимкнути сітку @@ -3178,7 +3164,7 @@ It works best when choosing a point on a straight segment and not a corner verte Stretch - Stretch + Розтягнути @@ -3283,7 +3269,7 @@ This is intended to be used with closed shapes and solids, and doesn't affect op Trimex - Trimex + Тримекс @@ -3351,6 +3337,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Створити проксі робочої площини + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -3580,12 +3583,12 @@ value by using the [ and ] keys while drawing Tick - Tick + Позначка Tick-2 - Tick-2 + Тік-2 @@ -3600,7 +3603,7 @@ value by using the [ and ] keys while drawing Show unit - Show unit + Показати величини @@ -3615,7 +3618,7 @@ value by using the [ and ] keys while drawing The font to use for texts and dimensions - The font to use for texts and dimensions + Шрифт для використання в текстах та розмірах @@ -3650,7 +3653,7 @@ value by using the [ and ] keys while drawing Unit override - Unit override + Задати величину @@ -3785,17 +3788,17 @@ value by using the [ and ] keys while drawing The space between the text and the dimension line - The space between the text and the dimension line + Відступ тексту від розмірної лінії Line spacing - Line spacing + Інтервал The spacing between different lines of text - The spacing between different lines of text + Інтервал між рядками тексту @@ -4564,12 +4567,12 @@ such as "Arial:Bold" Tick - Tick + Позначка Tick-2 - Tick-2 + Тік-2 @@ -5198,7 +5201,7 @@ This value is the maximum segment length. G - G + G @@ -5211,14 +5214,14 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: - Converting: + Перетворення: @@ -5265,7 +5268,7 @@ Note: C++ exporter is faster, but is not as featureful yet активна команда: - + None Немає @@ -5320,7 +5323,7 @@ Note: C++ exporter is faster, but is not as featureful yet Довжина - + Angle Кут @@ -5365,7 +5368,7 @@ Note: C++ exporter is faster, but is not as featureful yet Кількість сторін - + Offset Зміщення @@ -5445,7 +5448,7 @@ Note: C++ exporter is faster, but is not as featureful yet Позначка - + Distance Відстань @@ -5651,7 +5654,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Filled - Filled + Заповнено @@ -5711,7 +5714,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Modify subelements - Modify subelements + Змінити піделементи @@ -5719,22 +5722,22 @@ To enabled FreeCAD to download these libraries, answer Yes. If checked, subelements will be modified instead of entire objects - + Top Згори - + Front Фронт - + Side Сторона - + Current working plane Current working plane @@ -5759,15 +5762,10 @@ To enabled FreeCAD to download these libraries, answer Yes. Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -5986,17 +5984,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Support: - Support: + Підтримка: Map mode: - Map mode: + Режим карти: length: - length: + довжина: @@ -6026,7 +6024,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Circular array - Circular array + Круговий масив @@ -6046,7 +6044,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Polar array - Polar array + Полярний масив @@ -6357,7 +6355,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Object: - Object: + Об'єкт: @@ -6407,7 +6405,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Aborted: - Aborted: + Перервано: @@ -6935,9 +6933,9 @@ To enabled FreeCAD to download these libraries, answer Yes. Перевернути розмірність - + Stretch - Stretch + Розтягнути @@ -6945,27 +6943,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7047,7 +7045,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Path array - Path array + Шлях масиву @@ -7062,7 +7060,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Trimex - Trimex + Тримекс @@ -7070,37 +7068,27 @@ To enabled FreeCAD to download these libraries, answer Yes. Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7130,22 +7118,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Create B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Підлаштувати @@ -7255,12 +7243,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Автогрупування - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7280,7 +7268,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7465,7 +7453,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Placement: - Placement: + Розміщення: @@ -7485,7 +7473,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled mirrored - mirrored + відображено @@ -7499,6 +7487,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledОбрані форми повинні визначити площину + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index d69eac0603..9bf6868567 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 92d2a7bcb0..568d31a3b6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -1496,7 +1496,7 @@ mitjançant l'opció Eines ->Gestor de complements Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2088,12 +2088,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2864,20 +2864,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3354,6 +3340,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5185,12 +5188,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversió correcta - + Converting: Converting: @@ -5239,7 +5242,7 @@ Note: C++ exporter is faster, but is not as featureful yet ordre activa: - + None Cap @@ -5294,7 +5297,7 @@ Note: C++ exporter is faster, but is not as featureful yet Longitud - + Angle Angle @@ -5339,7 +5342,7 @@ Note: C++ exporter is faster, but is not as featureful yet Nombre de costats - + Offset Separació @@ -5419,7 +5422,7 @@ Note: C++ exporter is faster, but is not as featureful yet Etiqueta - + Distance Distance @@ -5692,22 +5695,22 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Si està marcat, els subelements es modificaran en lloc dels objectes sencers - + Top Planta - + Front Alçat - + Side Costat - + Current working plane Pla de treball actual @@ -5732,15 +5735,10 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Premeu aquest botó per a crear l’objecte de text o finalitzeu el vostre text amb dues línies en blanc - + Offset distance Distància de separació - - - Trim distance - Distància de retall - Change default style for new objects @@ -6908,7 +6906,7 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Flip dimension - + Stretch Stretch @@ -6918,27 +6916,27 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7043,37 +7041,27 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7103,22 +7091,22 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Crea un B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Personalitzat @@ -7228,12 +7216,12 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7253,7 +7241,7 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7472,6 +7460,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index 76915af4c5..d434f84b1a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index 84374a2e38..6646445d98 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -1496,7 +1496,7 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5213,12 +5216,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5267,7 +5270,7 @@ Note: C++ exporter is faster, but is not as featureful yet lệnh hoạt động: - + None Không @@ -5322,7 +5325,7 @@ Note: C++ exporter is faster, but is not as featureful yet Chiều dài - + Angle Góc @@ -5367,7 +5370,7 @@ Note: C++ exporter is faster, but is not as featureful yet Số mặt bên - + Offset Offset @@ -5447,7 +5450,7 @@ Note: C++ exporter is faster, but is not as featureful yet Nhãn - + Distance Distance @@ -5721,22 +5724,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Nếu chọn, các phần tử con sẽ được sửa thay vì toàn bộ các đối tượng - + Top Đỉnh - + Front Phía trước - + Side Cạnh - + Current working plane Mặt phẳng làm việc hiện tại @@ -5761,15 +5764,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6937,7 +6935,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Flip dimension - + Stretch Stretch @@ -6947,27 +6945,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7072,37 +7070,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7132,22 +7120,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Tạo đường cong B-spline - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom Tùy chọn @@ -7257,12 +7245,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7282,7 +7270,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7501,6 +7489,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index 15f6e3f168..a0101ff0a1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 53af95817f..5de7e647b5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -1491,7 +1491,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1644,7 +1644,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2084,12 +2084,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2860,20 +2860,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3350,6 +3336,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5207,12 +5210,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful 转换成功 - + Converting: Converting: @@ -5261,7 +5264,7 @@ Note: C++ exporter is faster, but is not as featureful yet 当前命令: - + None 无 @@ -5316,7 +5319,7 @@ Note: C++ exporter is faster, but is not as featureful yet 长度 - + Angle 角度 @@ -5361,7 +5364,7 @@ Note: C++ exporter is faster, but is not as featureful yet 边数 - + Offset 偏移 @@ -5441,7 +5444,7 @@ Note: C++ exporter is faster, but is not as featureful yet 标签 - + Distance 距离 @@ -5713,22 +5716,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer If checked, subelements will be modified instead of entire objects - + Top 俯视 - + Front 前视 - + Side 侧面 - + Current working plane Current working plane @@ -5753,15 +5756,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Press this button to create the text object, or finish your text with two blank lines - + Offset distance 偏移距离 - - - Trim distance - 修剪距离 - Change default style for new objects @@ -6929,7 +6927,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Flip dimension - + Stretch Stretch @@ -6939,27 +6937,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7064,37 +7062,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7124,22 +7112,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 创建 B-样条 - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom 自定义 @@ -7249,12 +7237,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 自动群组 - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7274,7 +7262,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7493,6 +7481,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabled所选图形必须定义平面 + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index f42e8a5a05..743500d82c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 22e38a8290..c09735e7f1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -1496,7 +1496,7 @@ from menu Tools -> Addon Manager Toggles Constrain to Working Plane On/Off - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part @@ -1649,7 +1649,7 @@ The array can be turned into a polar or a circular array by changing its type.Create chamfer - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -2089,12 +2089,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2865,20 +2865,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - Create working plane proxy - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - Draft_Shape2DView @@ -3355,6 +3341,23 @@ convert closed edges into filled faces and parametric polygons, and merge faces Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + Form @@ -5212,12 +5215,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful Conversion successful - + Converting: Converting: @@ -5266,7 +5269,7 @@ Note: C++ exporter is faster, but is not as featureful yet 啟動指令： - + None 無 @@ -5321,7 +5324,7 @@ Note: C++ exporter is faster, but is not as featureful yet 間距 - + Angle 角度 @@ -5366,7 +5369,7 @@ Note: C++ exporter is faster, but is not as featureful yet 邊數 - + Offset 偏移複製 @@ -5446,7 +5449,7 @@ Note: C++ exporter is faster, but is not as featureful yet Label - + Distance 距離 @@ -5718,22 +5721,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer If checked, subelements will be modified instead of entire objects - + Top 上 - + Front 前視圖 - + Side Side - + Current working plane Current working plane @@ -5758,15 +5761,10 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Press this button to create the text object, or finish your text with two blank lines - + Offset distance Offset distance - - - Trim distance - Trim distance - Change default style for new objects @@ -6934,7 +6932,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Flip dimension - + Stretch Stretch @@ -6944,27 +6942,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to stretch - + Pick first point of selection rectangle Pick first point of selection rectangle - + Pick opposite point of selection rectangle Pick opposite point of selection rectangle - + Pick start point of displacement Pick start point of displacement - + Pick end point of displacement Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire @@ -7069,37 +7067,27 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select objects to trim or extend - + Pick distance Pick distance - - The offset distance - The offset distance - - - - The offset angle - The offset angle - - - + Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires Unable to trim these objects, too many wires - + These objects don't intersect. These objects don't intersect. - + Too many intersection points. Too many intersection points. @@ -7129,22 +7117,22 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 建立B型不規則曲線 - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of Working plane aligned to global placement of - + Dir Dir - + Custom 自訂 @@ -7254,12 +7242,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Autogroup - + Add new Layer Add new Layer - + Add to construction group Add to construction group @@ -7279,7 +7267,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Cannot offset this object type - + Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported @@ -7498,6 +7486,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelected Shapes must define a plane + + + Offset angle + Offset angle + importOCA diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm index bbf32772d8..961d980624 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.ts index 93bb9606e2..4f727da588 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ko.ts @@ -188,7 +188,7 @@ Project shape... - Project shape... + 프로젝트 모양... @@ -330,7 +330,7 @@ Different orientation - Different orientation + 다른 방향 @@ -388,12 +388,12 @@ Do you want to continue? Primary view - Primary view + 기본 보기 Secondary Views - Secondary Views + 보조 보기 @@ -433,17 +433,17 @@ Do you want to continue? Axonometric - Axonometric + 축척 Axis out and right - Axis out and right + 축 밖으로 및 오른쪽 Vertical tilt - Vertical tilt + 수직 기울기 @@ -508,12 +508,12 @@ Do you want to continue? View projection - View projection + 투영 보기 Axis aligned up - Axis aligned up + 축 정렬 @@ -534,12 +534,12 @@ Do you want to continue? Third Angle - Third Angle + 세 번째 각도 First Angle - First Angle + 첫 번째 각도 @@ -549,7 +549,7 @@ Do you want to continue? Axis aligned right: - Axis aligned right: + 축 오른쪽 정렬: @@ -557,12 +557,12 @@ Do you want to continue? Visible sharp edges - Visible sharp edges + 눈에 보이는 날카로운 모서리 Visible smooth edges - Visible smooth edges + 눈에 보이는 부드러운 가장자리 @@ -572,7 +572,7 @@ Do you want to continue? Visible outline edges - Visible outline edges + 보이는 윤곽선 가장자리 @@ -607,7 +607,7 @@ Do you want to continue? Project shapes - Project shapes + 프로젝트 모양 @@ -617,17 +617,17 @@ Do you want to continue? There is currently no active document to complete the operation - There is currently no active document to complete the operation + 현재 작업을 완료하기 위한 활성 문서가 없습니다. No active view - No active view + 활성 보기 없음 There is currently no active view to complete the operation - There is currently no active view to complete the operation + 현재 작업을 완료할 수 있는 활성 보기가 없습니다. diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm index 9f2cf60582..f77f55e000 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts index 13b945d4a9..e67a30e808 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts @@ -115,7 +115,7 @@ Insert view in drawing - Wstaw widok w rysunku + Wstaw widok do rysunku @@ -444,7 +444,7 @@ Do you want to continue? Vertical tilt - Pionowe pochylenie + Nachylenie w pionie @@ -568,12 +568,12 @@ Do you want to continue? Visible sewn edges - Widoczne przerywane krawędzie + Widoczne krawędzie szwu Visible outline edges - Widoczny obrys krawędzi + Widoczne krawędzie konturu @@ -593,12 +593,12 @@ Do you want to continue? Hidden sewn edges - Ukryte przerywane krawędzie + Ukryte krawędzie szwu Hidden outline edges - Ukryty obrys krawędzi + Ukryte krawędzie konturu diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts index 856b1cfaa6..b02d05ab1c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts index 7a37c2cd6b..8f016c9821 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - محدد مرجع الشكل الهندسي لـ - Add @@ -134,6 +129,11 @@ Solid صلب + + + Geometry reference selector for a + محدد مرجع الشكل الهندسي لـ + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index e210bc3626..735c3beb05 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -134,6 +129,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index bacb23baad..da3455a1f3 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Volič referenční geometrie pro - Add @@ -134,6 +129,11 @@ Solid Těleso + + + Geometry reference selector for a + Volič referenční geometrie pro + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index 251a66f16b..7c16eb4329 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 504e0e9663..23f0a3e101 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometrie-Referenzauswahl für ein - - - Geometry reference selector for a - Geometrie-Referenzauswahl für ein - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Klicken Sie auf "Hinzufügen" und wählen Sie geometrische Elemente, um sie zur Liste hinzuzufügen.{}Die folgenden geometrischen Elemente stehen zur Auswahl: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Wenn keine Geometrie zur Liste hinzugefügt wird, werden alle verbleibenden verwendet. @@ -134,6 +129,11 @@ Solid Vollkörper + + + Geometry reference selector for a + Geometrie-Referenzauswahl für ein + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 3daccfc003..fb7651f2eb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Επιλογέας γεωμετρίας αναφοράς για ένα - Add @@ -134,6 +129,11 @@ Solid Στερεό + + + Geometry reference selector for a + Επιλογέας γεωμετρίας αναφοράς για ένα + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index d6e6adbf4b..dd23097f75 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 6c4beacaf5..add3940b68 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selector de referencia de geometría para un - - - Geometry reference selector for a - Selector de referencia de geometría para una - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Clic en "Agregar" y seleccione los elementos geométricos para añadirlos a la lista.{} Los siguientes elementos geométricos se pueden seleccionar: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Si no se agrega geometría a la lista, se utilizarán todos los restantes. @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Selector de referencia de geometría para una + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index e99e530b0b..21ffe7a0be 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index cd1d1a4f97..ea9385eee3 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria-erreferentziaren hautatzailea honetarako: - - - Geometry reference selector for a - Geometria-erreferentziaren hautatzailea honetarako: - Add @@ -112,7 +107,7 @@ Click on "Add" and select geometric elements to add to the list. - Click on "Add" and select geometric elements to add to the list. + Sakatu 'Gehitu' eta hautatu elementu geometrikoak, haiek zerrendari gehitzeko. @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Zerrendari geometriarik gehitzen ez bazaio, geratzen direnak erabiliko dira. @@ -134,6 +129,11 @@ Solid Solidoa + + + Geometry reference selector for a + Geometria-erreferentziaren hautatzailea honetarako: + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 44ef6b0e3d..24169c6e5e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrinen viitevalitsin kohteelle - Add @@ -134,6 +129,11 @@ Solid Kiintomuoto + + + Geometry reference selector for a + Geometrinen viitevalitsin kohteelle + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts index 62e9d53587..973652ac74 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index 01af78f5d0..40146ba2ae 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index a7197c03fc..dcd9284cd2 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Sélecteur de référence de géométrie pour une - - - Geometry reference selector for a - Sélecteur de référence de géométrie pour une - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Cliquez sur "Ajouter" et sélectionnez les éléments géométriques pour les ajouter à la liste.{}Les éléments géométriques suivants sont autorisés à être sélectionner : {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Si aucune géométrie n'est ajoutée à la liste, tous les éléments restants seront utilisés. @@ -134,6 +129,11 @@ Solid Solide + + + Geometry reference selector for a + Sélecteur de référence de géométrie pour une + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 1dab0ce553..d4036f3df0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - O selector de xeometría de referencia para - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + O selector de xeometría de referencia para + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 793e2ddc96..332f9ee23f 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -75,11 +75,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Odabir referentne geometrije za - Add @@ -135,6 +130,11 @@ Solid Čvrsto tijelo + + + Geometry reference selector for a + Odabir referentne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index ffc9b0d2b7..4dc410f035 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 6105887cc3..5a0fc13612 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria hivatkozás választó ehhez - - - Geometry reference selector for a - Geometria hivatkozás kiválasztó ehhez - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Kattintson a "Hozzáadás" gombra, és jelölje ki a geometriai elemeket a listához adáshoz. {}A következő geometriai elemek közül választhat: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Ha a listához nem adnak hozzá geometriát, az összes többit használja. @@ -134,6 +129,11 @@ Solid Szilárd test + + + Geometry reference selector for a + Geometria hivatkozás kiválasztó ehhez + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index 69e8883637..0e81d62b16 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Pemilih referensi geometri untuk - - - Geometry reference selector for a - Pemilih referensi geometri untuk - Add @@ -134,6 +129,11 @@ Solid Padat + + + Geometry reference selector for a + Pemilih referensi geometri untuk + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index bb49153958..520d39f4b6 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selettore della geometria di riferimento per - - - Geometry reference selector for a - Selettore della geometria di riferimento per - Add @@ -134,6 +129,11 @@ Solid Solido + + + Geometry reference selector for a + Selettore della geometria di riferimento per + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 56bc750326..8303825505 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -74,11 +74,6 @@ Geometry reference selector for a ジオメトリー参照セレクター - - - Geometry reference selector for a - ジオメトリー参照セレクター - Add @@ -134,6 +129,11 @@ Solid ソリッド + + + Geometry reference selector for a + ジオメトリー参照セレクター + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts index a29474e4d9..bf8c5ae549 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solide + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index 8c6bcbb120..e5fa45c29f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -75,11 +75,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -135,6 +130,11 @@ Solid 복합체 + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm index fb72828ecb..1fa4e3f1f4 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts index 842d9dbf79..b57c7516c7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Pilnaviduris daiktas + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector @@ -2019,7 +2019,7 @@ Fillet works only on parts - Fillet works only on parts + Kampų suapvalinimas galimas tik detalėms diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index c6230ec861..20806b13f5 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometriereferentiekeuze voor een - Add @@ -134,6 +129,11 @@ Solid Volumemodel + + + Geometry reference selector for a + Geometriereferentiekeuze voor een + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts index e0c611c06d..4a3af079a7 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index 2eb15868f2..bc15887740 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 28563d6b10..2505c43a53 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Określenie odniesienia do geometrii dla - - - Geometry reference selector for a - Selektor odniesienia geometrii dla - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Kliknij na "Dodaj" i wybierz elementy geometryczne, aby dodać je do listy. {}Następujące elementy geometryczne mogą zostać wybrane: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Jeśli żadna geometria nie zostanie dodana do listy, wszystkie pozostałe zostaną użyte. @@ -134,6 +129,11 @@ Solid Bryła + + + Geometry reference selector for a + Selektor odniesienia geometrii dla + SolidSelector @@ -2202,7 +2202,7 @@ Box - Prostopadłościan + Sześcian diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index f4b69ea901..f5f892b730 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de referência geometria para um - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de referência geometria para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 5c69d2f1ec..fe086f9fbb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de geometria de referência para um - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de geometria de referência para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 74def81279..740d54c452 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrie selectorul de referinţă pentru o - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometrie selectorul de referinţă pentru o + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 35786472bd..888cce7c53 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Выбор геометрии для - Add @@ -134,6 +129,11 @@ Solid Твердотельный объект + + + Geometry reference selector for a + Выбор геометрии для + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts index 66e7731f37..4ba8b93788 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Teleso + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm index 52edac0d3c..a804bf0ea9 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index fba0aae108..58db25f6ba 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Izbirnik referenčne geometrije za - - - Geometry reference selector for a - Izbirnik referenčne geometrije za - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Kliknite "Dodaj" in izberite geometrijske prvine, ki jih želite dodati na seznam.{}Dovoljeno je izbrati naslednje geometrijske prvine: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Če na seznam ni dodane nobene geometrije, se uporabi vse obstoječe. @@ -134,6 +129,11 @@ Solid Telo + + + Geometry reference selector for a + Izbirnik referenčne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index a6b92dbf55..7f2d234f19 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Чврcто тело + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index feb90d779f..ba78db4e40 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 672ee65eff..937e350f77 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector @@ -1481,7 +1481,7 @@ Please specify a force greater than 0 - Please specify a force greater than 0 + Vänligen specificera en kraft större än 0 @@ -1503,7 +1503,7 @@ Please specify a pressure greater than 0 - Please specify a pressure greater than 0 + Vänligen specificera ett tryck större än 0 @@ -1616,7 +1616,7 @@ Selected object is not a part! - Selected object is not a part! + Markerad objekt är inte en komponent! diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 463a82aabe..43fd5c81e8 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 8deb95c41d..6afb6e5e26 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -72,12 +72,7 @@ Geometry reference selector for a - Geometry reference selector for a - - - - Geometry reference selector for a - Geometri referans seçici için bir + için geometri kaynak noktası seçici @@ -92,37 +87,37 @@ Click on "Add" and select geometric elements to add them to the list. - Click on "Add" and select geometric elements to add them to the list. + "Ekle" düğmesine basın ve listeye eklemek için geometrik elemanlar seçin. The following geometry elements are allowed to select: - The following geometry elements are allowed to select: + Aşağıdaki geometri elemanlarının seçilmesine izin veriliyor: Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + "Ekle" düğmesine basın ve listeye eklemek için geometrik elemanlar seçin.{}Aşağıdaki geometri elemanlarının seçilmesine izin veriliyor: {}{}{} If no geometry is added to the list, all remaining ones are used. - If no geometry is added to the list, all remaining ones are used. + Eğer hiçbir geometri listeye eklenmemişse, kalan tüm elemanlar kullanılır. Click on "Add" and select geometric elements to add to the list. - Click on "Add" and select geometric elements to add to the list. + "Ekle" düğmesine basın ve listeye eklemek için geometrik elemanlar seçin. Click on 'Add' and select geometric elements to add them to the list. - Click on 'Add' and select geometric elements to add them to the list. + "Ekle" düğmesine basın ve listeye eklemek için geometrik elemanlar seçin. {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Eğer hiçbir geometri listeye eklenmemişse, kalan tüm elemanlar kullanılır. @@ -134,6 +129,11 @@ Solid Katı + + + Geometry reference selector for a + Geometri referans seçici için bir + SolidSelector @@ -322,12 +322,12 @@ Elasticity equation - Esneklik denklemi + Elastisite denklemi Creates a FEM equation for elasticity - Esneklik için bir FEM denklemi oluşturur + Elastisite için bir FEM denklemi oluşturur @@ -2399,7 +2399,7 @@ Free - Ücretsiz + Serbest @@ -2409,7 +2409,7 @@ Fixed - Onarıldı + Sabitle diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index fc42e006cf..a638daa908 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Суцільне тіло + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 6b1cc35e48..0c807dce37 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -134,6 +129,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index ef9f094f0f..7140b6a6df 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Công cụ chọn tham chiếu hình học cho một - Add @@ -134,6 +129,11 @@ Solid Chất rắn + + + Geometry reference selector for a + Công cụ chọn tham chiếu hình học cho một + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index f9f5b07242..0aa66e00eb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - 的几何体参考选择器 - Add @@ -134,6 +129,11 @@ Solid 实体 + + + Geometry reference selector for a + 的几何体参考选择器 + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 298adff706..28aca0736b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid 實體 + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm index 9a0d0593be..187bfc95c3 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts index b45c8dbe8f..58f19cdf9a 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ar.ts @@ -861,7 +861,7 @@ Delete selection - Delete selection + حذف التحديد @@ -893,7 +893,7 @@ Fill hole - Fill hole + ملء الثقوب diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm index 7591643e9f..a37d4a478f 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts index 2c52c18a7f..98a979ccfd 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts @@ -740,7 +740,7 @@ Mesh Create - Mesh Create + Amaraun-sorrera diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm index cd08f5b15c..2ad6350a08 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts index 63af9ce6c8..1829642e11 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts @@ -11,7 +11,7 @@ Add triangle - Add triangle + 삼각형 추가 @@ -87,7 +87,7 @@ Decimation... - Decimation... + 제거 @@ -209,13 +209,13 @@ Close hole - Close hole + 구멍 닫기 Close holes interactively - Close holes interactively + 대화식으로 구멍 닫기 @@ -228,7 +228,7 @@ Fill holes... - Fill holes... + 구멍 메우기... @@ -492,7 +492,7 @@ Mark a component to remove it from the mesh - Mark a component to remove it from the mesh + 메시에서 제거할 구성요소를 표시합니다. @@ -511,7 +511,7 @@ Remove topologic independent components from the mesh - Remove topologic independent components from the mesh + 메시에서 토폴로지 독립 구성요소 제거 @@ -1704,7 +1704,7 @@ to a smoother appearance. Add triangle - Add triangle + 삼각형 추가 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm index cfc9d5c01d..e9db1a9ca2 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index 4099ce8008..820678b070 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -693,7 +693,7 @@ Union - Suma + Połączenie @@ -750,7 +750,7 @@ Mesh union - Złączenie siatek + Połączenie siatek @@ -826,7 +826,7 @@ Fix indices - Napraw indeksy + Napraw wskaźniki @@ -867,7 +867,7 @@ Cut - Wytnij + Przetnij @@ -1036,7 +1036,7 @@ Face indices - Wskaźniki powierzchni + Wskaźniki ścian @@ -1139,7 +1139,7 @@ Najpierw uruchom polecenie do naprawy zagięć Invalid face indices - Nieprawidłowe wskaźniki powierzchni + Nieprawidłowe wskaźniki ścian @@ -1154,7 +1154,7 @@ Najpierw uruchom polecenie do naprawy zagięć Invalid neighbour indices - Nieprawidłowe wskaźniki sąsiadów + Nieprawidłowe wskaźniki sąsiedztwa @@ -1245,7 +1245,7 @@ Najpierw uruchom polecenie do naprawy zagięć Evaluation settings - Ustawienia ewaluacji + Ustawienia klasyfikacji @@ -2205,13 +2205,13 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować. Inventor V2.1 ascii - Inventor V2.1 w ASCII + Inventor v2.1 w ASCII Stanford Polygon - Stanford Polygon + Stanford Triangle Format @@ -2262,12 +2262,12 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować. Python module def - Moduły Pythona + Definicje modułów Python Asymptote Format - Format Asymptoty + Format asymptoty @@ -2391,7 +2391,7 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować. &Meshes - Siatki + &Siatki diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm index facda59cc1..6dadf68e67 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 6ef0617833..a0e5f74b01 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -1595,7 +1595,7 @@ to a smoother appearance. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Пояснение</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Если расчет освещения производится для каждой нормали вершины это называется <span style=" font-style:italic;">затенением по Фонгу</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">если расчет освещения производится для каждой нормали грани, то это называется </span>Плоским затенением<span style=" font-style:normal;">.</span></p></body></html> diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm index dccd577613..a1b7f832f7 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index 0ca45c1565..9cfd50a4b8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -851,7 +851,7 @@ Remove folds - Remove folds + Ta bort vik diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm index ec643db7e2..1de9aeca2d 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts index cb97aaa480..712f963b23 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ko.ts @@ -99,12 +99,12 @@ This command only works with a 'mesh' object. Trim with plane - Trim with plane + 평면으로 다듬기 Section with plane - Section with plane + 평면이 있는 단면 @@ -167,12 +167,12 @@ This command only works with a 'mesh' object. Connect edges if distance less than - Connect edges if distance less than + 거리가 다음보다 작을 경우 가장자리를 연결 하십시오 Failure - Failure + 실패 @@ -220,9 +220,7 @@ This command only works with a 'mesh' object. Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. This command only works with a 'mesh' object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh Workbench. - Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. - -This command only works with a 'mesh' object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh Workbench. + '시작'을 누른다음 메쉬의 점을 선택하시오, 포인트가 충분할 떄.. @@ -232,7 +230,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Snap tolerance to vertices - Snap tolerance to vertices + 정점에 대한 스냅 허용오차 @@ -242,7 +240,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Split threshold - Split threshold + 분할 임계값 @@ -252,17 +250,17 @@ This command only works with a 'mesh' object, not a regular face or surface. To Tolerance to mesh - Tolerance to mesh + 메쉬에 대한 공차 Continuity - Continuity + 연속성 Maximum curve degree - Maximum curve degree + 최대 곡률 @@ -305,7 +303,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Use the standard mesher - Use the standard mesher + 표준 측정을 사용 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm index f16f274692..b6d983e2ab 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index 388a421c13..4352610a08 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -6,7 +6,7 @@ MeshPart - Składnik_Siatki + Siatka Części @@ -36,7 +36,7 @@ Creates an approximated curve on top of a mesh. This command only works with a 'mesh' object. Tworzy przybliżoną krzywą na wierzchu siatki. -To polecenie działa tylko z obiektem typu 'mesh'. +To polecenie działa tylko z obiektem typu Siatka. @@ -242,12 +242,12 @@ Ta komenda działa tylko z obiektem 'mesh', a nie zwykłą płaszczyzną lub pow Split threshold - Próg połączenia + Próg podziału Spline Approximation - Przybliżenie splajnu + Przybliżenie krzywej złożonej @@ -473,7 +473,7 @@ Wartość w zakresie 0,2–10. Whether meshes will be arranged preferably using quadrilateral faces - Czy siatki będą układane najlepiej przy użyciu czworobocznych ścian + Czy siatki będą rozmieszczone najlepiej przy użyciu czworobocznych ścian @@ -535,7 +535,7 @@ Wartość w zakresie 0,2–10. Select the side you want to keep. - Wybierz stronę, którą chcesz zachować. + Wybierz tę stronę, którą zamierzasz pozostawić. @@ -558,7 +558,7 @@ Wartość w zakresie 0,2–10. MeshPart - Składnik_Siatki + Siatka Części diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts index 88693c9bbe..76123900e9 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts @@ -142,12 +142,12 @@ Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts index 774a72fd3c..4a3c7d0bc4 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ar.ts @@ -142,12 +142,12 @@ يرجي اختيار ثلاثة اعضاء اولا - + Unsupported Function وظيفة غير مدعومة - + Press OK إضغط على 'موافق' diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts index e9bf63299c..3d8e6f43ce 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts @@ -142,12 +142,12 @@ Selecciona 3 objectes primer - + Unsupported Function Funció no suportada - + Press OK Premeu OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts index ac151160e5..5b004fd9c8 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts @@ -142,12 +142,12 @@ Nejdříve prosím vyberte 3 objekty - + Unsupported Function Nepodporovaná funkce - + Press OK Stiskněte OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts index 7e0051aab6..080d4ddee0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts @@ -142,12 +142,12 @@ Bitte wählen Sie zuerst 3 Objekte - + Unsupported Function Nicht unterstützte Funktion - + Press OK Drücken Sie OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts index d758482355..a95ae84e9a 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_el.ts @@ -142,12 +142,12 @@ Παρακαλώ επιλέξτε πρώτα 3 αντικείμενα - + Unsupported Function Μη υποστηριζόμενη Λειτουργία - + Press OK Πιέστε το OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts index 0e8c43354f..bdf1a13801 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts @@ -142,12 +142,12 @@ Por favor, seleccione tres objetos primero - + Unsupported Function Función no admitida - + Press OK Pulse Aceptar diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts index 5851f17eb4..3d34f03b83 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_eu.ts @@ -142,12 +142,12 @@ Lehenengo, hautatu 3 objektu - + Unsupported Function Onartzen ez den funtzioa - + Press OK Sakatu 'Ados' diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts index ed065c2af4..faf4d07f0c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts @@ -142,12 +142,12 @@ Valitse 3 objektia ensin - + Unsupported Function Toiminto jota ei tueta - + Press OK Paina OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts index 15b0c011ac..a82018efd9 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fil.ts @@ -142,12 +142,12 @@ Mangyaring pumili muna ng 3 mga object - + Unsupported Function Hindi suportadong Function - + Press OK I-press ang OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts index b54796a38b..5f53d2004f 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts @@ -142,12 +142,12 @@ Veuillez d'abord sélectionner 3 objets - + Unsupported Function Fonction non supportée - + Press OK Appuyez sur OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts index 407faad766..fb437bb099 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_gl.ts @@ -142,12 +142,12 @@ Por favor, escolme primeiro 3 obxectos - + Unsupported Function Función non soportada - + Press OK Prema OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts index a856cd2336..592566aeca 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts @@ -142,12 +142,12 @@ Molim odaberite tri oblika - + Unsupported Function Nepodržana funkcija - + Press OK Pritisnite OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts index 6e74d7f23f..473edb25f4 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts @@ -142,12 +142,12 @@ Kérem válasszon ki először 3 tárgyat - + Unsupported Function Nem támogatott funkció - + Press OK OK-ra kattintson diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts index cab9ccb959..1c04e7fbe2 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts @@ -142,12 +142,12 @@ Silahkan pilih 3 objek terlebih dahulu - + Unsupported Function Fungsi Tidak Didukung - + Press OK Tekan OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts index 61d8bd94e0..0dca35bee5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts @@ -142,12 +142,12 @@ Seleziona prima 3 oggetti - + Unsupported Function Funzione non supportata - + Press OK Premere OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts index e3637b60b0..e92fafb1a4 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts @@ -142,12 +142,12 @@ まず最初にオブジェクトを3つ選択してください - + Unsupported Function サポートされていない関数です - + Press OK OKを押してください diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts index 4c6e2482b4..053d832a12 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_kab.ts @@ -142,12 +142,12 @@ Veuillez d'abord sélectionner 3 objets - + Unsupported Function Fonction non supportée - + Press OK Appuyez sur OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm index 5af65cd369..9c01cc639a 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts index b527dcf7d4..080d207c26 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ko.ts @@ -26,22 +26,22 @@ Use ViewProvider in Tree View - Use ViewProvider in Tree View + 트리 보기에서 ViewProvider 사용 If this is checked, Multmatrix Object will be Parametric - If this is checked, Multmatrix Object will be Parametric + 이 옵션을 선택하면 Multimatrix Object는 Parametric이 됩니다. Use Multmatrix Feature - Use Multmatrix Feature + 다중 매트릭스 기능 사용 The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit - The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit + 다각형, 프리즘 또는 절두체의 최대 면 수입니다. fn이 이 값보다 크면 객체는 원형으로 간주됩니다. 제한이 없는 경우 0으로 설정 @@ -56,12 +56,12 @@ maximum fragment size - maximum fragment size + 최대 조각 크기 angular (fa) - angular (fa) + 각(fa) @@ -81,7 +81,7 @@ convexity - convexity + 볼록 @@ -91,12 +91,12 @@ Deflection - Deflection + 편향 deflection - deflection + deflection @@ -106,27 +106,27 @@ If this is checked, Features will claim their children in the tree view - If this is checked, Features will claim their children in the tree view + 이 옵션을 선택하면 기능이 트리 보기에서 하위 항목을 요구합니다. Print debug information in the Console - Print debug information in the Console + 콘솔에서 디버그 정보 인쇄 The path to the OpenSCAD executable - The path to the OpenSCAD executable + OpenSCAD 실행 파일의 경로 Minimum angle for a fragment - Minimum angle for a fragment + 조각의 최소 각도 Minimum size of a fragment - Minimum size of a fragment + 프래그먼트의 최소 크기 @@ -134,20 +134,20 @@ Convert Edges to Faces - Convert Edges to Faces + 모서리를 면으로 변환 Please select 3 objects first - Please select 3 objects first + 먼저 3개의 개체를 선택하세요. - + Unsupported Function - Unsupported Function + 지원되지 않는 기능 - + Press OK Press OK @@ -174,17 +174,17 @@ Perform - Perform + 실행 Mesh Boolean - Mesh Boolean + 메쉬 부울 Error all shapes must be either 2D or both must be 3D - Error all shapes must be either 2D or both must be 3D + 오류 모든 모양은 2D이거나 둘 다 3D여야 합니다. @@ -212,7 +212,7 @@ Add OpenSCAD Element... - Add OpenSCAD Element... + OpenSCAD 요소 추가... @@ -225,12 +225,12 @@ Color Shapes - Color Shapes + 색상 모양 Color Shapes by validity and type - Color Shapes by validity and type + 유효성 및 유형별 색상 모양 @@ -246,12 +246,12 @@ Expand Placements - Expand Placements + 게재위치 확장 Expand all placements downwards the FeatureTree - Expand all placements downwards the FeatureTree + FeatureTree 아래로 모든 배치를 확장합니다. diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts index 3856afde0f..ec086977f3 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_lt.ts @@ -142,12 +142,12 @@ Prašome pirma pasirinkti 3 kūnus - + Unsupported Function Nepalaikoma funkcija - + Press OK Paspauskite „Gerai“ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts index aecb2a922f..60742c8fc8 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts @@ -142,12 +142,12 @@ Selecteer eerst 3 objecten - + Unsupported Function Niet-ondersteunde functie - + Press OK Druk op OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts index e04edd0c8c..f651ecf7c5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts @@ -142,12 +142,12 @@ Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index 5e720231e5..8b5c374483 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -142,12 +142,12 @@ Najpierw proszę wybrać 3 obiekty - + Unsupported Function Funkcja nieobsługiwana - + Press OK Naciśnij przycisk OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts index c406fc87c6..18482d9321 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts @@ -142,12 +142,12 @@ Por favor, selecione 3 objetos - + Unsupported Function Função não suportada - + Press OK Pressione OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts index 8a440c74f6..63ddf3f15d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts @@ -142,12 +142,12 @@ Por favor, selecione primeiro 3 objetos - + Unsupported Function Função não Suportada - + Press OK Pressione OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts index ce1378a324..4aed9a079c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts @@ -142,12 +142,12 @@ Selectati mai intai 3 obiecte - + Unsupported Function Functia nu este suportata - + Press OK Apasati Ok diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm index ba9c3bbbbf..a235dfdafe 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts index a00374de87..ea7373961c 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts @@ -142,12 +142,12 @@ Сначала необходимо выбрать 3 объекта - + Unsupported Function Неподдерживаемая функция - + Press OK Нажмите кнопку OK @@ -194,12 +194,12 @@ Load - Load + Загрузить Save - Save + Сохранить diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts index 38d17628fa..f8743409ce 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sk.ts @@ -142,12 +142,12 @@ Najprv vyberte 3 objekty - + Unsupported Function Nepodporovaná funkcia - + Press OK Stlačte OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts index 885d052be3..cdec46505b 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts @@ -142,12 +142,12 @@ Izberite najprej 3 predmete - + Unsupported Function Nepodprta zmožnost - + Press OK Pritisnite V redu diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts index a2ca3a621c..7c503158f1 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts @@ -142,12 +142,12 @@ Молимо, прво одаберите 3 објекта - + Unsupported Function Неподржана функција - + Press OK Притисните OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts index 9e94b98b3d..994c7876e0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts @@ -142,12 +142,12 @@ Vänligen välj tre objekt först - + Unsupported Function Funktionen stöds ej - + Press OK Tryck på 'Ok' diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm index d9cf0295e8..7966a8cd5e 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts index 86edfd2b5f..a49c6ee036 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_tr.ts @@ -142,12 +142,12 @@ Lütfen öncelikle 3 nesneyi seçin - + Unsupported Function Desteklenmeyen işlev - + Press OK OK (Tamam) tuşuna basın @@ -194,12 +194,12 @@ Load - Load + Yükle Save - Save + Kaydet diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts index 42bd752b35..05d88ac01a 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts @@ -142,12 +142,12 @@ Будь ласка, оберіть спочатку 3 об'єкти - + Unsupported Function Непідтримувані функції - + Press OK Натисніть OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts index 21734e5390..2c4367cec4 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_val-ES.ts @@ -142,12 +142,12 @@ Seleccioneu 3 objectes primer - + Unsupported Function Funció no admesa - + Press OK Premeu D'acord diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts index b0c4a62d4a..6bb15ae8e3 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_vi.ts @@ -142,12 +142,12 @@ Hãy chọn 3 đối tượng trước - + Unsupported Function Chức năng không được hỗ trợ - + Press OK Nhấn OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts index 91b0fcc50e..6157da298e 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts @@ -142,12 +142,12 @@ 请先选择三个对象 - + Unsupported Function 不支持的功能 - + Press OK 按确定 diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts index 6a91714277..45a8889f3d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts @@ -142,12 +142,12 @@ 請先選擇3個物件 - + Unsupported Function 此功能未支援 - + Press OK 按確定 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.ts b/src/Mod/Part/Gui/Resources/translations/Part_af.ts index c312552029..2dc20fcb6f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_af.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_af.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts index 0f9839477d..b3e81a3e1c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 8f71cb11ca..35d2550168 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -359,6 +359,16 @@ Es pot usar un 'Filtre de Compost' per extreure'n els talls individuals.Slice apart Llesca a part + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'interseccionen + Slice a selected object by other objects, and split it apart. @@ -381,16 +391,6 @@ A 'Compound Filter' can be used to extract the remaining pieces. Això significa que els volums superposats de les formes seran eliminats. Es pot usar un 'Filtre de Compost' per extreure'n les peces restants. - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'interseccionen - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 3c92ee55b9..a20890e071 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -363,6 +363,16 @@ Výsledné části budou definovány jako složenina. Slice apart Rozdělit plátkováním + + + Boolean Fragments + Booleovské fragmenty + + + + Split objects where they intersect + Rozdělit objekty, kde se protínají + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ nebo s tvary uvnitř složeniny. To znamená, že budou odstraněny překrývající se objemy tvarů. K extrakci zbývajících částí může být použitý 'Filtr složenin'. - - - Boolean Fragments - Booleovské fragmenty - - - - Split objects where they intersect - Rozdělit objekty, kde se protínají - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 6979b7b694..8f9980f07e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -359,6 +359,16 @@ Ein 'Verbundobjekt-Filter' kann verwendet werden, um die einzelnen Scheiben zu e Slice apart Auseinanderschneiden + + + Boolean Fragments + Boolesche Fragmente + + + + Split objects where they intersect + Auftrennen von Objekten an deren Schnittstellen + Slice a selected object by other objects, and split it apart. @@ -381,16 +391,6 @@ oder mit den Formen innerhalb einer Verbindung durchführen. Das bedeutet, dass die sich überschneidenden Volumen der Formen entfernt werden. Ein 'Compoundfilter' kann verwendet werden, um die restlichen Stücke zu extrahieren. - - - Boolean Fragments - Boolesche Fragmente - - - - Split objects where they intersect - Auftrennen von Objekten an deren Schnittstellen - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 8b6acd9a30..2d9627b002 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index d055ebaa2a..7ddb9e1434 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -363,6 +363,16 @@ Un 'Filtro Compuesto' se puede utilizar para extraer las rodajas individuales.Slice apart Cortar aparte + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Corta objetos donde intersectan + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ o con las formas dentro de un componente. Esto significa que los volúmenes superpuestos de las formas se eliminarán. Un 'Filtro Compuesto' se puede utilizar para extraer las piezas restantes. - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Corta objetos donde intersectan - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 4fdf9629db..c8b7cc8822 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -362,6 +362,16 @@ Sortuko diren piezak konposatu batean biltegiratuko dira. Slice apart Xerratu eta banandu + + + Boolean Fragments + Zati boolearrak + + + + Split objects where they intersect + Zatitu objektuak haiek ebakitzen diren gunean + Slice a selected object by other objects, and split it apart. @@ -385,16 +395,6 @@ edo konposatu baten barruko formekin. Horrek esan nahi du gainjarrita dauden formen bolumenak kendu egingo direla. 'Konposatu-iragazki' bat erabili daiteke gainerako piezak erauzteko. - - - Boolean Fragments - Zati boolearrak - - - - Split objects where they intersect - Zatitu objektuak haiek ebakitzen diren gunean - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index b854cf1099..a6367a4a96 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -363,6 +363,16 @@ Tuloksena olevat viipaleet tallennetaan yhdistelmämuotoon. Slice apart Viipaloi erilleen + + + Boolean Fragments + Boolen operaation sirpaleet + + + + Split objects where they intersect + Jaa objektit paloihin leikkauskohdista + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ valitulla kohteella, tai muodoilla yhdistelmämuodon sisällä. Tämä tarkoittaa, että muotojen päällekkäiset tilavuudet poistetaan. 'Yhdistelmämuodon suodatinta' voidaan käyttää jäljelle jääneiden palojen poimintaan. - - - Boolean Fragments - Boolen operaation sirpaleet - - - - Split objects where they intersect - Jaa objektit paloihin leikkauskohdista - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts index 8d3df70408..9ad7934aab 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 066484de4c..7ef8d6335a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -362,6 +362,16 @@ Un 'Filtre composé' peut être utilisé pour extraire les tranches individuelle Slice apart Séparer et exploser + + + Boolean Fragments + Fragments Booléens + + + + Split objects where they intersect + Diviser les objets à leur intersection + Slice a selected object by other objects, and split it apart. @@ -385,16 +395,6 @@ ou avec les formes à l'intérieur d'un composé. Cela signifie que les volumes de chevauchement des formes seront supprimés. Un 'Filtre composé' peut être utilisé pour extraire les parties restantes. - - - Boolean Fragments - Fragments Booléens - - - - Split objects where they intersect - Diviser les objets à leur intersection - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 2ff29ca450..894a7f3061 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Tallar e separar + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Divide obxectos onde intersecten + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Divide obxectos onde intersecten - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index df4710c3b7..b6a70d64d0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -373,6 +373,16 @@ Rezultirajući komadići čuvat će se u složenom spoju. Slice apart Razdijeli zasebno + + + Boolean Fragments + Booleovi Fragmenti + + + + Split objects where they intersect + Razdjeli objekate gdje se sijeku + Slice a selected object by other objects, and split it apart. @@ -396,16 +406,6 @@ ili s oblicima unutar složenog spoja. To znači da će se ukloniti preklapajući volumeni oblika. 'Složeni filtar' može se koristiti za izdvajanje preostalih dijelova. - - - Boolean Fragments - Booleovi Fragmenti - - - - Split objects where they intersect - Razdjeli objekate gdje se sijeku - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index bb44d830b7..947858b6bd 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -361,6 +361,16 @@ Az 'Összetevő szűrő' használható az egyes szeletek kibontásához.Slice apart Részekre szeletel + + + Boolean Fragments + Logikai töredékek + + + + Split objects where they intersect + Metszőpontnál szétválasztja a tárgyakat + Slice a selected object by other objects, and split it apart. @@ -384,16 +394,6 @@ vagy az összetevőn belüli alakzatokkal. Ez azt jelenti, hogy az alakzatok egymást átfedő formái törlődnek. A fennmaradó darabok kivonására az 'összetevő szűrő' használható. - - - Boolean Fragments - Logikai töredékek - - - - Split objects where they intersect - Metszőpontnál szétválasztja a tárgyakat - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index 43561e8ad6..0ef69481b8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index e8e1356f7b..150a512f44 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -362,6 +362,16 @@ Un 'Filtro Composto' può essere usato per estrarre i singoli ritagli.Slice apart Trancia + + + Boolean Fragments + Frammenti booleani + + + + Split objects where they intersect + Dividi gli oggetti dove si intersecano + Slice a selected object by other objects, and split it apart. @@ -385,16 +395,6 @@ o con le forme di un composto. Questo significa che i volumi sovrapposti delle forme saranno rimossi. Un 'filtro composto' può essere usato per estrarre i pezzi rimanenti. - - - Boolean Fragments - Frammenti booleani - - - - Split objects where they intersect - Dividi gli oggetti dove si intersecano - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 7cf493f50f..bfe28541a2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -360,6 +360,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart 切断 + + + Boolean Fragments + ブーリアン演算 フラグメント + + + + Split objects where they intersect + 交差するオブジェクトを切断 + Slice a selected object by other objects, and split it apart. @@ -382,16 +392,6 @@ A 'Compound Filter' can be used to extract the remaining pieces. これによってシェイプの重なり合った体積が取り除かれます。 残った断片を取り出すには「コンパウンド・フィルター」を使用します。 - - - Boolean Fragments - ブーリアン演算 フラグメント - - - - Split objects where they intersect - 交差するオブジェクトを切断 - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts index cf5e9f78aa..9f693561f9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm index da7d360e0b..97c2ba8e66 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ko.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ko.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index 81965e0dc9..45f8180b82 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -111,12 +111,12 @@ Attachment Offset (inactive - not attached): - Attachment Offset (inactive - not attached): + 첨부 오프셋(비활성 - 첨부되지 않음): Attachment Offset (in local coordinates): - Attachment Offset (in local coordinates): + 첨부 파일 오프셋(로컬 좌표): @@ -124,7 +124,7 @@ Compound Filter - Compound Filter + 복합 필터 @@ -132,10 +132,10 @@ area, or length, or by choosing specific items. If a second object is selected, it will be used as reference, for example, for collision or distance filtering. - Filter out objects from a selected compound by characteristics like volume, -area, or length, or by choosing specific items. -If a second object is selected, it will be used as reference, for example, -for collision or distance filtering. + 체적, +면적, 길이, 또는 특정 항목을 선택하여. +두 번째 개체를 선택하면 참조로 사용됩니다. 예를 들면 다음과 같습니다. +충돌 또는 거리 필터링용. @@ -145,7 +145,7 @@ for collision or distance filtering. Select a shape that is a compound, first! Second selected item (optional) will be treated as a stencil. - Select a shape that is a compound, first! Second selected item (optional) will be treated as a stencil. + 먼저 합성인 모양을 선택하십시오! 두 번째로 선택한 항목(선택 사항) 은 스텐실로 처리됩니다. @@ -159,16 +159,16 @@ for collision or distance filtering. {err} Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + 다음 오류로 인해 결과 계산에 실패했습니다. -{err} +{오류} -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +그래도 기능을 만들려면 '계속'을 클릭하고 취소하려면 '중단'을 클릭하세요. Bad selection - Bad selection + 잘못된 선택 @@ -177,11 +177,11 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + 다음 오류로 인해 결과 계산에 실패했습니다. {errstr} -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +그래도 기능을 만들려면 '계속'을 클릭하고 취소하려면 '중단'을 클릭하세요. @@ -195,13 +195,13 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Split up a compound of shapes into separate objects. It will create a 'Compound Filter' for each shape. - Split up a compound of shapes into separate objects. -It will create a 'Compound Filter' for each shape. + 모양의 결과물을 별도의 개체로 나눕니다. +각 모양에 대해 '복합 필터'를 만듭니다. Explode compound: split up a list of shapes into separate objects - Explode compound: split up a list of shapes into separate objects + 화합물 분해: 모양 목록을 별도의 개체로 분할 @@ -211,12 +211,12 @@ It will create a 'Compound Filter' for each shape. First select a shape that is a compound. - First select a shape that is a compound. + 먼저 컴파운드인 모양을 선택합니다. Bad selection - Bad selection + 잘못된 선택 @@ -224,7 +224,7 @@ It will create a 'Compound Filter' for each shape. Connect objects - Connect objects + 개체 연결 @@ -237,12 +237,12 @@ It will create a 'Compound Filter' for each shape. Cutout for object - Cutout for object + 개체에 대한 컷아웃 Makes a cutout in one object to fit another object. - Makes a cutout in one object to fit another object. + 다른 개체에 맞게 한 개체에 컷아웃을 만듭니다. @@ -250,12 +250,12 @@ It will create a 'Compound Filter' for each shape. Embed object - Embed object + 개체 포함 Fuses one object into another, taking care to preserve voids. - Fuses one object into another, taking care to preserve voids. + 하나의 물체를 다른 물체에 융합하여 공극을 보존합니다. @@ -281,7 +281,7 @@ A 'Compound Filter' can be used to extract the individual slices. Split object by intersections with other objects, and pack the pieces into a compound. - Split object by intersections with other objects, and pack the pieces into a compound. + 개체를 다른 개체와의 교차점으로 분할하고 조각을 하나의 컴파운드로 묶습니다. @@ -305,11 +305,11 @@ A 'Compound Filter' can be used to extract the individual slices. {err} Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Computing the result failed with an error: + 다음 오류로 인해 결과 계산에 실패했습니다. -{err} +{오류} -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. +그래도 기능을 만들려면 '계속'을 클릭하고 취소하려면 '중단'을 클릭하세요. @@ -324,7 +324,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Bad selection - Bad selection + 잘못된 선택 @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue @@ -944,7 +944,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Bad selection - Bad selection + 잘못된 선택 @@ -2353,7 +2353,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Chamfer the selected edges of a shape - 선택 된 모서리를 떼어냅니다. + 선택된 모서리에 챔퍼 @@ -5040,7 +5040,7 @@ Please check one or more edge entities first. Attachment Offset (inactive - not attached): - Attachment Offset (inactive - not attached): + 첨부 오프셋(비활성 - 첨부되지 않음): diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm index 90809e1ec9..d7d51b9004 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_lt.qm and b/src/Mod/Part/Gui/Resources/translations/Part_lt.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index 52e0a30f15..1f21da5bd3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue @@ -861,12 +861,12 @@ Ar vistiek norite tęsti? Edit fillet edges - Edit fillet edges + Taisyti apvalinamas kraštines Edit chamfer edges - Edit chamfer edges + Taisyti sklembiamas kraštines @@ -2349,12 +2349,12 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Chamfer... - Chamfer... + Nusklembti... Chamfer the selected edges of a shape - Chamfer the selected edges of a shape + Nusklembia pasirinktas geometrinio kūno kraštines @@ -2880,7 +2880,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Create a ruled surface from either two Edges or two wires - Sukurti tiesiškąjį paviršių iš dviejų kraštinių arba dviejų laužčių + Sukurti tiesiškąjį paviršių iš dviejų kraštinių arba dviejų rėmelių @@ -3300,7 +3300,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Chamfer Edges - Chamfer Edges + Nusklembti kraštus @@ -3511,7 +3511,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Fillet Edges - Fillet Edges + Suapvalinti kraštus @@ -3531,7 +3531,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Fillet Parameter - Fillet Parameter + Suapvalinimo dydžiai @@ -3541,12 +3541,12 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Select edges - Pasirinkti raštines + Pasirinkti kraštines Select faces - Select faces + Pasirinkti sienas @@ -3576,7 +3576,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Radius: - Radius: + Spindulys: @@ -3596,7 +3596,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Edges to chamfer - Edges to chamfer + Sklembiamos kraštinės @@ -3629,7 +3629,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Edge%1 - Edge%1 + Kraštinė%1 @@ -3644,14 +3644,14 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. No shape selected - No shape selected + Nepasirinkta kraštinių No valid shape is selected. Please select a valid shape in the drop-down box first. - No valid shape is selected. -Please select a valid shape in the drop-down box first. + Nepasirinktos tinkamos kraštinės. +Prašom prmiausia pasirinkti tinkamą kūną išplaukiančiame lange. @@ -3662,8 +3662,8 @@ Please select a valid shape in the drop-down box first. No edge entity is checked to fillet. Please check one or more edge entities first. - No edge entity is checked to fillet. -Please check one or more edge entities first. + Nėra pasirinkta kraštinių apvalinimui. +Prašome pažymėti bent vieną kraštinę. @@ -4127,7 +4127,7 @@ Please check one or more edge entities first. Radius: - Radius: + Spindulys: @@ -4677,7 +4677,7 @@ Please check one or more edge entities first. At least two vertices, edges, wires or faces are required. - Reikalingos bent dvi viršūnės, kraštinės, kontūrai ar sienos. + Būtinos bent dvi viršūnės, kraštinės, rėmeliai ar sienos. @@ -4735,17 +4735,17 @@ Please check one or more edge entities first. x - x + x y - y + y z - z + z @@ -4817,12 +4817,12 @@ Please check one or more edge entities first. Select two or more faces - Select two or more faces + Pasirinkite vieną ar daugiau sienų Select only one part object - Select only one part object + Pasirinkite tik vieną detalę @@ -4887,7 +4887,7 @@ Please check one or more edge entities first. At least one edge or wire is required. - At least one edge or wire is required. + Būtina bent viena kraštinė ar rėmelis. @@ -4907,7 +4907,7 @@ Please check one or more edge entities first. Done - Done + Atlikta @@ -5022,7 +5022,7 @@ Please check one or more edge entities first. unknown error - unknown error + nežinoma klaida @@ -5345,7 +5345,7 @@ in the 3D view for the sweep path. Done - Done + Atlikta diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 268d8278d3..751c98697a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -363,6 +363,16 @@ Een 'SamenstellingsFilter' kan worden gebruikt om de afzonderlijke segmenten uit Slice apart Snij door + + + Boolean Fragments + Booleaanse fragmenten + + + + Split objects where they intersect + Splits voorwerpen waar ze overlappen + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ of met de vormen in een samenstelling. Dit betekent dat de overlappende volumes van de vormen worden verwijderd. Een 'Samengestelde Filter' kan worden gebruikt om de resterende stukken uit te pakken. - - - Boolean Fragments - Booleaanse fragmenten - - - - Split objects where they intersect - Splits voorwerpen waar ze overlappen - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.ts b/src/Mod/Part/Gui/Resources/translations/Part_no.ts index 8ab5c6c7e8..f8a8a9c0bd 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_no.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_no.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index b92f4ee270..d3da616c21 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 6dbe952331..c61125b572 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -6,7 +6,7 @@ Attachment... - Mocowanie ... + Dołączenie ... @@ -41,7 +41,7 @@ Attachment - Mocowanie + Dołączenie @@ -51,7 +51,7 @@ Ignored. Can't attach object to itself! - Zignorowano. Nie można dołączyć obiektu do siebie! + Zignorowano. Nie można dołączyć obiektu do samego siebie! @@ -96,7 +96,7 @@ Attached with mode {mode} - Dołączono z trybem {mode} + Załączony w trybie {mode} @@ -106,12 +106,12 @@ Attachment Offset: - Odsunięcie załącznika: + Odsunięcie dołączenia: Attachment Offset (inactive - not attached): - Odsunięcie załącznika (nieaktywny - nie podłączony): + Odsunięcie dołączenia: (nieaktywny - nie dołączono): @@ -363,6 +363,16 @@ Do wyodrębnienia poszczególnych wycinków można użyć "filtra złożeń".Slice apart Pokrój część + + + Boolean Fragments + Fragmenty funkcji logicznej + + + + Split objects where they intersect + Podziel obiekty, które się przecinają + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ lub z kształtami wewnątrz bryły złożonej. Oznacza to, że nakładające się objętości kształtów zostaną usunięte. Do wyodrębnienia pozostałych elementów można użyć 'Filtra złożeń'. - - - Boolean Fragments - Fragmenty funkcji logicznej - - - - Split objects where they intersect - Podziel obiekty, które się przecinają - Continue @@ -850,7 +850,7 @@ Do you want to continue? Set colors... - Ustaw kolory... + Ustaw kolory ... @@ -2073,7 +2073,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Profile - Profil + Kontur @@ -2512,7 +2512,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Cut - Wytnij + Przetnij @@ -2622,12 +2622,12 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Union - Suma + Połączenie Make a union of several shapes - Utwórz sumę kilku kształtów + Utwórz połączenie kilku kształtów @@ -3091,7 +3091,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Attachment Offset: - Odsunięcie załącznika: + Odsunięcie dołączenia: @@ -3126,7 +3126,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Flip sides - Obróć strony + Odwróć strony @@ -3207,7 +3207,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Union - Suma + Połączenie @@ -3281,7 +3281,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Performing union on non-solids is not possible - Utworzenie sumy na obiektach nie będących bryłami nie jest możliwe + Utworzenie złączenia na obiektach nie będących bryłami nie jest możliwe @@ -3384,7 +3384,7 @@ Wskazówka: aby uwzględnić również długość krawędzi, ustaw obie wartośc Length - Długość + Odstęp @@ -3632,7 +3632,7 @@ Wskazówka: aby uwzględnić również długość krawędzi, ustaw obie wartośc Length - Długość + Odstęp @@ -4000,7 +4000,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Box - Prostopadłościan + Sześcian @@ -4875,7 +4875,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Select one or more connected edges you want to sweep along. - Wybierz jedną lub więcej połączonych krawędzi, które chcesz wyciągnąć wzdłuż. + Wybierz jedną lub więcej połączonych krawędzi, po których chcesz wykonać przeciągnięcie. @@ -4910,7 +4910,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Select one or more connected edges in the 3d view and press 'Done' - Wybierz jedną lub więcej połączonych krawędzi w widoku 3D i naciśnij przycisk "Gotowe" + Wybierz jedną lub więcej połączonych krawędzi w oknie widoku 3D i naciśnij przycisk "Gotowe" @@ -4926,7 +4926,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Sweep - Rozciągnięcie po ścieżce + Wyciągnięcie po ścieżce @@ -4975,7 +4975,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Attachment Offset: - Odsunięcie załącznika: + Odsunięcie dołączenia: @@ -5010,7 +5010,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Flip sides - Obróć strony + Odwróć strony @@ -5040,7 +5040,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Attachment Offset (inactive - not attached): - Odsunięcie załącznika (nieaktywny - nie podłączony): + Odsunięcie dołączenia: (nieaktywny - nie dołączono): @@ -5127,7 +5127,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Click on the faces in the 3d view to select them. - Aby wybrać ściany zaznacz je w widoku 3D. + Aby wybrać ściany zaznacz je w oknie widoku 3D. @@ -5302,7 +5302,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Sweep - Rozciągnięcie po ścieżce + Wyciągnięcie po ścieżce diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 37c6bbb31e..ae0c76fb8c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -363,6 +363,16 @@ O 'Filtro Composto' pode ser usado para extrair as fatias individuais.Slice apart Fatiar e separar + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Separa os objetos, pelas suas intersecções + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ ou com as formas dentro de um composto. Isso significa que os volumes sobrepostos das formas serão removidos. Um 'Filtro de Composto' pode ser usado para extrair as partes restantes. - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Separa os objetos, pelas suas intersecções - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 1c2175bac1..9b0ea29483 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -363,6 +363,16 @@ O 'Filtro Composto' pode ser usado para extrair as partes individuais.Slice apart Separa e afasta + + + Boolean Fragments + Fragmentos de booleano + + + + Split objects where they intersect + Separa os objetos, onde eles se intercetam + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ ou com as formas contidas num composto. Isso significa que os volumes sobrepostos das formas serão removidos. Um 'Filtro de Composto' pode ser usado para extrair as partes restantes. - - - Boolean Fragments - Fragmentos de booleano - - - - Split objects where they intersect - Separa os objetos, onde eles se intercetam - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 264884f4fb..66dbe8c3b8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -363,6 +363,16 @@ Un "Filtru compus" poate fi folosit pentru a extrage secţiunile individuale.Slice apart Separare + + + Boolean Fragments + Fragmente booleene + + + + Split objects where they intersect + Separă obiectele acolo unde se intersectează + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ sau cu formele din interiorul unui compus. Acest lucru înseamnă că volumele de forme care se suprapun vor fi șterse. Un "Filtru combinat" poate fi folosit pentru a extrage secțiunile rămase. - - - Boolean Fragments - Fragmente booleene - - - - Split objects where they intersect - Separă obiectele acolo unde se intersectează - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 9b193e472f..1aed520494 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Разрезать на части + + + Boolean Fragments + Булевы фрагменты + + + + Split objects where they intersect + Разделение объектов там, где они пересекаются + Slice a selected object by other objects, and split it apart. @@ -385,16 +395,6 @@ A 'Compound Filter' can be used to extract the remaining pieces. Это означает, что накладываемые объёмы фигур будут удалены. Для извлечения оставшихся элементов можно использовать 'Фильтр соединений'. - - - Boolean Fragments - Булевы фрагменты - - - - Split objects where they intersect - Разделение объектов там, где они пересекаются - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts index 6ede7b3318..c63c171e24 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Rozdelí objekty v mieste, kde sa pretínajú + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Rozdelí objekty v mieste, kde sa pretínajú - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index ce6efaf4e5..e8fb3132b6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -362,6 +362,16 @@ Posamezne rezine lahko izločite s pomočje "Sita sestavov". Slice apart Razcepi + + + Boolean Fragments + Drobci logične operacije + + + + Split objects where they intersect + Razcepi predmete, kjer se sekajo + Slice a selected object by other objects, and split it apart. @@ -385,16 +395,6 @@ oz. z oblikami znotraj sestava. To pomeni, da bodo prekrivajoči deli oblik odstranjeni. Ostale dele lahko izvelečet s "sitom sestava". - - - Boolean Fragments - Drobci logične operacije - - - - Split objects where they intersect - Razcepi predmete, kjer se sekajo - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index fe5516c630..a0e9271315 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 8bf0331185..801a944682 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Dela isär + + + Boolean Fragments + Booleska fragment + + + + Split objects where they intersect + Dela objekt där de skär varandra + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Booleska fragment - - - - Split objects where they intersect - Dela objekt där de skär varandra - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index d9fdc2f3a2..90a69abce2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -359,6 +359,16 @@ Bölümleri nesneden çıkarmak için 'Birleşik Filtresi' kullanılabilir.Slice apart Parçalara ayır + + + Boolean Fragments + Mantıksal (Boolean) Parçalar + + + + Split objects where they intersect + Nesnelerin kesiştiği yerlerden ayır + Slice a selected object by other objects, and split it apart. @@ -381,16 +391,6 @@ A 'Compound Filter' can be used to extract the remaining pieces. Bu; şekillerin örtüşen hacimleri kaldırılacak anlamına gelir. Kalan parçaları çıkarmak için 'Birleşik Filtresi' kullanılabilir. - - - Boolean Fragments - Mantıksal (Boolean) Parçalar - - - - Split objects where they intersect - Nesnelerin kesiştiği yerlerden ayır - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index 39f9c820de..164773b82b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Розрізати на частини + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index 029f27323b..7457270a81 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Llesca a part + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'intersequen + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'intersequen - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index 22cd5d35b2..4cf14b2c61 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index 799001377a..fdd23e283f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + 布尔片段 + + + + Split objects where they intersect + 从交叉处分割对象 + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - 布尔片段 - - - - Split objects where they intersect - 从交叉处分割对象 - Continue diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index c6271ab2d7..2653891baf 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -363,6 +363,16 @@ A 'Compound Filter' can be used to extract the individual slices. Slice apart Slice apart + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Slice a selected object by other objects, and split it apart. @@ -386,16 +396,6 @@ or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Continue diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm index 237de2535c..e8ccd61aa0 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts index 9a705fc2ac..80c5518651 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitiewe vorms - - - - Width: - Wydte: - Length: Lengte: + + + + Width: + Wydte: + @@ -1005,12 +1087,6 @@ Height: Hoogte: - - - - Angle: - Hoek: - @@ -1063,6 +1139,12 @@ Radius 2: Radius 2: + + + + Angle: + Hoek: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - End point - Start point Start point + + + End point + End point + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Voeg by + + + Remove + Verwyder + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Hoek - - - Remove - Verwyder - @@ -1714,6 +1796,11 @@ click again to end selection Add Voeg by + + + Remove + Verwyder + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Radius: - - - Remove - Verwyder - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hole parameters - - - - None - Geen - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hole parameters + + + + None + Geen + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selection is not in Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document No valid features in this document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + Profiel + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Rigting + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + Size + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + Dimensioneer + + + + Through all + Through all + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Soort + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Omgekeerde - - - - Diameter - Diameter - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Rigting - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - Profiel - - - - Countersink angle - Countersink angle - - - - - Dimension - Dimensioneer - - - - Through all - Through all - - - - Size - Size - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm index df3127dc4a..cdbcfa3783 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.ts index 0e8e80bc19..dcb20c7abd 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ar.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometric Primitives - - - - Width: - العرض: - Length: Length: + + + + Width: + العرض: + @@ -1005,12 +1087,6 @@ Height: الإرتفاع: - - - - Angle: - الزاوية: - @@ -1063,6 +1139,12 @@ Radius 2: شعاع 2: + + + + Angle: + الزاوية: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - End point - Start point Start point + + + End point + End point + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add إضافة + + + Remove + إزالة + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle الزاوية - - - Remove - إزالة - @@ -1714,6 +1796,11 @@ click again to end selection Add إضافة + + + Remove + إزالة + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: الشعاع: - - - Remove - إزالة - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - عوامل الثقب - - - - None - لا يوجد - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + عوامل الثقب + + + + None + لا يوجد + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selection is not in Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document لا تأثيرات صالحة في هذا الملف + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + الملف الشخصي + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + الأتجاه + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + الحجم + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + قطر الدائرة + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + البعد + + + + Through all + Through all + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type النوع + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - قطر الدائرة - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - الأتجاه - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - الملف الشخصي - - - - Countersink angle - Countersink angle - - - - - Dimension - البعد - - - - Through all - Through all - - - - Size - الحجم - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm index f4850de4d2..2fdfca7ae5 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index a98009dcfa..945a0bae04 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Engranatges esvolvant... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Pinyó... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -11,12 +93,12 @@ Additive helix - Additive helix + Hèlix additiva Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + Escombra un esbós seleccionat al llarg d’una hèlix @@ -552,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Crea una forma de sub-objectes @@ -565,12 +647,12 @@ Subtractive helix - Subtractive helix + Hèlix subtractiva Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + Fer Escombrat a un esbós seleccionat al llarg d’una hèlix i traieu-lo del cos @@ -740,78 +822,78 @@ Edit ShapeBinder - Edit ShapeBinder + Editeu ShapeBinder Create ShapeBinder - Create ShapeBinder + Crear ShapeBinder Create SubShapeBinder - Create SubShapeBinder + Creeu SubShapeBinder Create Clone - Create Clone + Crea un clon Make copy - Make copy + Fer còpia Create a Sketch on Face - Create a Sketch on Face + Creeu un Sketch a la cara croquis Create a new Sketch - Create a new Sketch + Creeu un esbós nou Convert to MultiTransform feature - Convert to MultiTransform feature + Converteix a la funció MultiTransform Create Boolean - Create Boolean + Crea booleà Add a Body - Add a Body + Afegiu un cos Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Migreu les funcions de disseny de peces heretades a Bodies Move tip to selected feature - Move tip to selected feature + Mou el consell a la funció seleccionada Duplicate a PartDesign object - Duplicate a PartDesign object + Dupliqueu un objecte PartDesign Move an object - Move an object + Mou un objecte Move an object inside tree - Move an object inside tree + Mou un objecte dins de l'arbre @@ -821,7 +903,7 @@ Make LinearPattern - Make LinearPattern + Fer Patró Lineal @@ -981,18 +1063,18 @@ Geometric Primitives Primitives geomètriques - - - - Width: - Amplada: - Length: Longitud: + + + + Width: + Amplada: + @@ -1002,12 +1084,6 @@ Height: Alçada: - - - - Angle: - Angle: - @@ -1060,6 +1136,12 @@ Radius 2: Radi 2: + + + + Angle: + Angle: + @@ -1229,16 +1311,16 @@ Si el valor és zero, serà igual al Radi2 Z: Z: - - - End point - Punt final - Start point Punt inicial + + + End point + Punt final + PartDesignGui::DlgReference @@ -1385,12 +1467,17 @@ clica altre cop per finalitzar la selecció Add Afegeix + + + Remove + Elimina + - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - Seleccioneu un element per ressaltar-lo +- Feu doble clic sobre un element per veure els xamfrans @@ -1432,18 +1519,13 @@ clica altre cop per finalitzar la selecció Angle Angle - - - Remove - Elimina - There must be at least one item - There must be at least one item + Hi ha d’haver com a mínim un element @@ -1453,7 +1535,7 @@ clica altre cop per finalitzar la selecció At least one item must be kept. - At least one item must be kept. + Cal conservar com a mínim un element. @@ -1541,8 +1623,8 @@ clica altre cop per finalitzar la selecció - select an item to highlight it - double-click on an item to see the drafts - - select an item to highlight it -- double-click on an item to see the drafts + - Seleccioneu un element per ressaltar-lo +- feu doble clic sobre un element per veure els esborranys @@ -1570,7 +1652,7 @@ clica altre cop per finalitzar la selecció There must be at least one item - There must be at least one item + Hi ha d’haver com a mínim un element @@ -1580,7 +1662,7 @@ clica altre cop per finalitzar la selecció At least one item must be kept. - At least one item must be kept. + Cal conservar com a mínim un element. @@ -1594,7 +1676,7 @@ clica altre cop per finalitzar la selecció There must be at least one item - There must be at least one item + Hi ha d’haver com a mínim un element @@ -1711,30 +1793,30 @@ clica altre cop per finalitzar la selecció Add Afegeix + + + Remove + Elimina + - select an item to highlight it - double-click on an item to see the fillets - - select an item to highlight it -- double-click on an item to see the fillets + - Seleccioneu un element per ressaltar-lo +- feu doble clic sobre un element per veure el Cantell Radius: Radi: - - - Remove - Elimina - There must be at least one item - There must be at least one item + Hi ha d’haver com a mínim un element @@ -1744,7 +1826,7 @@ clica altre cop per finalitzar la selecció At least one item must be kept. - At least one item must be kept. + Cal conservar com a mínim un element. @@ -1811,22 +1893,22 @@ clica altre cop per finalitzar la selecció Pitch-Height-Angle - Pitch-Height-Angle + Pas-Alçada-Angle Pitch-Turns-Angle - Pitch-Turns-Angle + Pas-Voltes- Angle Height-Turns-Angle - Height-Turns-Angle + Alçada-Voltes-Angle Height-Turns-Growth - Height-Turns-Growth + Alçada-Voltes-Increment @@ -1841,7 +1923,7 @@ clica altre cop per finalitzar la selecció Turns: - Turns: + Voltes: @@ -1856,7 +1938,7 @@ clica altre cop per finalitzar la selecció Left handed - Left handed + Ma esquerra @@ -1866,7 +1948,7 @@ clica altre cop per finalitzar la selecció Remove outside of profile - Remove outside of profile + Elimina fora del perfil @@ -1876,21 +1958,11 @@ clica altre cop per finalitzar la selecció Helix parameters - Helix parameters + Paràmetres d’hèlix PartDesignGui::TaskHoleParameters - - - Hole parameters - Paràmetres de forat - - - - None - Cap - Counterbore @@ -1904,22 +1976,32 @@ clica altre cop per finalitzar la selecció Cheesehead (deprecated) - Cheesehead (deprecated) + Cheesehead (obsolet) Countersink socket screw (deprecated) - Countersink socket screw (deprecated) + Cargol de Cap avellanat (obsolet) Cap screw (deprecated) - Cap screw (deprecated) + Cap de Cargol (obsolet) + + + + Hole parameters + Paràmetres de forat + + + + None + Cap ISO metric regular profile - ISO metric regular profile + Perfil regular mètric ISO @@ -1962,7 +2044,7 @@ clica altre cop per finalitzar la selecció List can be reordered by dragging - List can be reordered by dragging + La llista es pot reordenar arrossegant @@ -2045,7 +2127,7 @@ clica altre cop per finalitzar la selecció List can be reordered by dragging - List can be reordered by dragging + La llista es pot reordenar arrossegant @@ -2083,7 +2165,7 @@ clica altre cop per finalitzar la selecció List can be reordered by dragging - List can be reordered by dragging + La llista es pot reordenar arrossegant @@ -2131,7 +2213,7 @@ clica altre cop per finalitzar la selecció List can be reordered by dragging - List can be reordered by dragging + La llista es pot reordenar arrossegant @@ -2222,13 +2304,13 @@ clica altre cop per finalitzar la selecció Use custom vector for pad direction otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction otherwise -the sketch plane's normal vector will be used + Utilitzeu un vector personalitzat per a la direcció del Pad en cas contrari +s'utilitzarà el vector normal del pla d'esbós Use custom direction - Use custom direction + Utilitzeu la direcció personalitzada @@ -2238,7 +2320,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + component X del vector de direcció @@ -2248,7 +2330,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + component Y del vector de direcció @@ -2258,34 +2340,34 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + component Z del vector de direcció If unchecked, the length will be measured along the specified direction - If unchecked, the length will be -measured along the specified direction + Si no es Selecciona, la longitud serà +mesurada al llarg de la direcció especificada Length along sketch normal - Length along sketch normal + Longitud al llarg de l'esbós normal Offset to face - Offset to face + Desplaçament a la Cara Offset from face in which pad will end - Offset from face in which pad will end + Desplaçament de la cara en què acabarà el Pad Applies length symmetrically to sketch plane - Applies length symmetrically to sketch plane + Aplica la longitud simètricament al pla de dibuix @@ -2295,7 +2377,7 @@ measured along the specified direction Reverses pad direction - Reverses pad direction + Inverteix la direcció @@ -2678,7 +2760,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + La llista es pot reordenar arrossegant @@ -2965,7 +3047,7 @@ clica altre cop per finalitzar la selecció There must be at least one item - There must be at least one item + Hi ha d’haver com a mínim un element @@ -2975,7 +3057,7 @@ clica altre cop per finalitzar la selecció At least one item must be kept. - At least one item must be kept. + Cal conservar com a mínim un element. @@ -3281,6 +3363,11 @@ clica altre cop per finalitzar la selecció Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3319,21 +3406,6 @@ clica altre cop per finalitzar la selecció Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3341,9 +3413,9 @@ clica altre cop per finalitzar la selecció La selecció no és en un cos de peça actiu - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3370,6 +3442,16 @@ clica altre cop per finalitzar la selecció No valid features in this document No perfil vàlids en aquest document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -3918,47 +4000,47 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Motorcycle 425 - Motorcycle 425 + Motocicleta 425 Motorcycle 428 - Motorcycle 428 + Motocicleta 428 Motorcycle 520 - Motorcycle 520 + Motocicleta 520 Motorcycle 525 - Motorcycle 525 + Motocicleta 525 Motorcycle 530 - Motorcycle 530 + Motocicleta 530 Motorcycle 630 - Motorcycle 630 + Motocicleta 630 Chain Pitch: - Chain Pitch: + Pas de cadena: 0 in - 0 in + 0 polzades Roller Diameter: - Roller Diameter: + Diàmetre del rodet: @@ -4103,27 +4185,42 @@ angle de avellanat Task Hole Parameters Paràmetres de l'acció de forat + + + <b>Threading and size</b> + <b>Roscatge i mida</b> + + + + Profile + Perfil + Whether the hole gets a thread - Whether the hole gets a thread + Si el forat tindrà rosca + + + + Threaded + Rosca Whether the hole gets a modelled thread - Whether the hole gets a modelled thread + Si el forat obté una rosca modelada Model Thread - Model Thread + Rosca modelada Live update of changes to the thread Note that the calculation can take some time - Live update of changes to the thread -Note that the calculation can take some time + Actualització en directe dels canvis a la rosca +Tingueu en compte que el càlcul pot trigar una mica @@ -4133,30 +4230,50 @@ Note that the calculation can take some time Customize thread clearance - Customize thread clearance + Personalitzeu la Tolerància de la rosca Custom Thread Clearance - Custom Thread Clearance + Tolerància de rosca personalitzada Clearance - Clearance + Tolerància Custom Thread clearance value - Custom Thread clearance value + Valor de tolerància de rosca personalitzat + + + + Direction + Direcció + + + + Right hand + A la dreta + + + + Left hand + A l'esquerra + + + + Size + Mida Hole clearance Only available for holes without thread - Hole clearance -Only available for holes without thread + Tolerància del forat +Només disponible per a forats sense rosca @@ -4175,59 +4292,17 @@ Only available for holes without thread Wide - Wide + Amplada + + + + Class + Classe Tolerance class for threaded holes according to hole profile - Tolerance class for threaded holes according to hole profile - - - - Hole diameter - Hole diameter - - - - Thread Depth - Thread Depth - - - - Hole depth - Hole depth - - - - Tapped (DIN76) - Tapped (DIN76) - - - - - Type - Tipus - - - - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom - - - - Reverses the hole direction - Reverses the hole direction - - - - Reversed - Invertit + Classe de tolerància per a forats roscats segons el perfil del forat @@ -4235,90 +4310,17 @@ over 90: larger hole radius at the bottom Diameter Diàmetre + + + Hole diameter + Diàmetre del Forat + Depth Profunditat - - - Class - Classe - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Cònic - - - - Direction - Direcció - - - - Flat - Pla - - - - Angled - Angular - - - - Right hand - A la dreta - - - - Left hand - A l'esquerra - - - - Threaded - Rosca - - - - Profile - Perfil - - - - Countersink angle - 17/5000 -angle de avellanat - @@ -4331,19 +4333,19 @@ angle de avellanat A través de totes - - Size - Mida + + Thread Depth + Profunditat de la Rosca - - <b>Drill point</b> - <b>Punt de perforació</b> + + Hole depth + Profunditat del forat - - <b>Misc</b> - <b>Diversos</b> + + Tapped (DIN76) + Roscat (DIN76) @@ -4351,9 +4353,89 @@ angle de avellanat <b>Tall de forat</b> - - <b>Threading and size</b> - <b>Roscatge i mida</b> + + + Type + Tipus + + + + Cut type for screw heads + Tipus de tall per a caps de cargol + + + + Check to override the values predefined by the 'Type' + Marqueu per substituir els valors predefinits pel "Tipus" + + + + Custom values + Valors personalitzats + + + + Countersink angle + 17/5000 +angle de avellanat + + + + <b>Drill point</b> + <b>Punt de perforació</b> + + + + Flat + Pla + + + + Angled + Angular + + + + The size of the drill point will be taken into +account for the depth of blind holes + Es tindrà en compte el tamany del punt de perforació +tenir en compte la profunditat dels forats cecs + + + + Take into account for depth + Tingueu en compte la profunditat + + + + <b>Misc</b> + <b>Diversos</b> + + + + Tapered + Cònic + + + + Taper angle for the hole +90 degree: straight hole +under 90: smaller hole radius at the bottom +over 90: larger hole radius at the bottom + Angle de conicitat del forat +90 graus: forat recte +menors de 90: radi de forat més petit a la part inferior +més de 90: radi de forat més gran a la part inferior + + + + Reverses the hole direction + Inverteix la direcció del forat + + + + Reversed + Invertit @@ -4363,7 +4445,7 @@ angle de avellanat Loose - Loose + Solt @@ -4381,55 +4463,55 @@ angle de avellanat Workbench - - - &Part Design - &Part Design - &Sketch - &Sketch + &Esbós + + + + &Part Design + &Part Design Create a datum - Create a datum + Crear un datum Create an additive feature - Create an additive feature + Crear una característica aditiva Create a subtractive feature - Create a subtractive feature + Creeu una funció subtractiva Apply a pattern - Apply a pattern + Apliqueu un patró Apply a dress-up feature - Apply a dress-up feature + Apliqueu una funció de envoltar Sprocket... - Sprocket... + Pinyó... Involute gear... - Involute gear... + Engranatges esvolvant... Shaft design wizard - Shaft design wizard + Assistent de disseny d’eixos @@ -4439,12 +4521,12 @@ angle de avellanat Part Design Helper - Part Design Helper + Ajudant de disseny de peces Part Design Modeling - Part Design Modeling + Modelatge de disseny de peces diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm index 46fc1cd113..8465e981f8 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index 018c6854bd..ebfc795ff7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Řetězové kolo... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Základní geometrické útvary - - - - Width: - Šířka: - Length: Délka: + + + + Width: + Šířka: + @@ -1005,12 +1087,6 @@ Height: Výška: - - - - Angle: - Úhel: - @@ -1063,6 +1139,12 @@ Radius 2: Poloměr 2: + + + + Angle: + Úhel: + @@ -1232,16 +1314,16 @@ Je-li nulový, rovná se Poloměr2 Z: Z: - - - End point - Koncový bod - Start point Počáteční bod + + + End point + Koncový bod + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Přidat + + + Remove + Odstranit + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Úhel - - - Remove - Odstranit - @@ -1714,6 +1796,11 @@ click again to end selection Add Přidat + + + Remove + Odstranit + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Poloměr: - - - Remove - Odstranit - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Parametry díry - - - - None - Žádný - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parametry díry + + + + None + Žádný + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Vyberte hranu, plochu nebo tělo ze samostatného těla. - - - Select an edge, face, or body from an active body. - Vyberte hranu, plochu nebo tělo z aktivního těla. - - - - Please create a feature first. - Nejprve prosím vytvořte prvek. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Výběr není v aktivním těle - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Vyberte hranu, plochu nebo tělo z aktivního těla. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Neplatný prvek v tomto dokumentu + + + Please create a feature first. + Nejprve prosím vytvořte prvek. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parametry díry + + + <b>Threading and size</b> + <b>Závit a velikost</b> + + + + Profile + Profil + Whether the hole gets a thread Zda díra dostane závit + + + Threaded + Se závitem + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Směr + + + + Right hand + Pravý + + + + Left hand + Levý + + + + Size + Velikost + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Šířka + + + Class + Třída + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Průměr + Hole diameter Průměr otvoru + + + + Depth + Hloubka + + + + + Dimension + Rozměr + + + + Through all + Skrz vše + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Řez díry</b> + Type Typ + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Vlastní hodnoty + + + + Countersink angle + Úhel kuželového zahloubení + + + + <b>Drill point</b> + <b>Koncový bod</b> + + + + Flat + Rovné + + + + Angled + Zkosené + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Zohlednit hloubku + + + + <b>Misc</b> + <b>Různé</b> + + + + Tapered + Kuželový + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Překlopit - - - - Diameter - Průměr - - - - - Depth - Hloubka - - - - Class - Třída - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Vlastní hodnoty - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Zohlednit hloubku - - - - Tapered - Kuželový - - - - Direction - Směr - - - - Flat - Rovné - - - - Angled - Zkosené - - - - Right hand - Pravý - - - - Left hand - Levý - - - - Threaded - Se závitem - - - - Profile - Profil - - - - Countersink angle - Úhel kuželového zahloubení - - - - - Dimension - Rozměr - - - - Through all - Skrz vše - - - - Size - Velikost - - - - <b>Drill point</b> - <b>Koncový bod</b> - - - - <b>Misc</b> - <b>Různé</b> - - - - <b>Hole cut</b> - <b>Řez díry</b> - - - - <b>Threading and size</b> - <b>Závit a velikost</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Skica + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index 5cc31d9bd3..8e6cde002f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 8f39b47ade..87485aeafc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Evolventenrad... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Kettenrad... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -11,7 +93,7 @@ Additive helix - Zu addierende Wendel + Hinzuzufügende Wendel @@ -178,7 +260,7 @@ Duplicates the selected object and adds it to the active body - Vervielfältigt das ausgewählte Objekt und fügt es dem aktiven Körper hinzu + Dupliziert das ausgewählte Element und fügt es dem aktiven Körper hinzu @@ -335,7 +417,7 @@ Move object after other object - Objekt hinter ein anderes Objekt verschieben + Objekt nach einem anderen Objekt verschieben @@ -981,18 +1063,18 @@ Geometric Primitives Geometrische Grundkörper - - - - Width: - Breite: - Length: Länge: + + + + Width: + Breite: + @@ -1002,12 +1084,6 @@ Height: Höhe: - - - - Angle: - Winkel: - @@ -1060,6 +1136,12 @@ Radius 2: Radius 2: + + + + Angle: + Winkel: + @@ -1229,16 +1311,16 @@ Wenn Null, ist er gleich Radius2 Z: Z: - - - End point - Endpunkt - Start point Startpunkt + + + End point + Endpunkt + PartDesignGui::DlgReference @@ -1385,6 +1467,11 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Add Hinzufügen + + + Remove + Entfernen + - select an item to highlight it @@ -1432,11 +1519,6 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Angle Winkel - - - Remove - Entfernen - @@ -1711,6 +1793,11 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Add Hinzufügen + + + Remove + Entfernen + - select an item to highlight it @@ -1723,11 +1810,6 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Radius: Radius: - - - Remove - Entfernen - @@ -1881,16 +1963,6 @@ Nochmaliges Klicken beendet den Auswahl-Modus. PartDesignGui::TaskHoleParameters - - - Hole parameters - Bohrungsparameter - - - - None - Nichts - Counterbore @@ -1916,6 +1988,16 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Cap screw (deprecated) Zylinderschraube (veraltet) + + + Hole parameters + Bohrungsparameter + + + + None + Nichts + ISO metric regular profile @@ -3281,6 +3363,11 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Cannot use this command as there is no solid to subtract from. Dieser Befehl kann nicht verwendet werden, da kein Festkörper vorhanden ist, von dem etwas abgezogen werden kann. + + + Ensure that the body contains a feature before attempting a subtractive command. + Bitte sicherstellen, dass der Körper ein Objekt enthält, bevor ein subtraktiver Befehl angewendet wird. + Cannot use selected object. Selected object must belong to the active body @@ -3319,21 +3406,6 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Select an edge, face, or body from a single body. Kante, Fläche oder Körper eines einzelnen Körpers auswählen. - - - Select an edge, face, or body from an active body. - Kante, Fläche oder Körper eines aktiven Körpers auswählen. - - - - Please create a feature first. - Bitte zuerst ein Element erstellen. - - - - Please select only one feature in an active body. - Bitte nur ein Element in einem aktiven Körper auswählen. - @@ -3341,9 +3413,9 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Auswahl ist nicht im aktiven Körper - - Ensure that the body contains a feature before attempting a subtractive command. - Bitte sicherstellen, dass der Körper ein Objekt enthält, bevor ein subtraktiver Befehl angewendet wird. + + Select an edge, face, or body from an active body. + Kante, Fläche oder Körper eines aktiven Körpers auswählen. @@ -3370,6 +3442,16 @@ Nochmaliges Klicken beendet den Auswahl-Modus. No valid features in this document Keine gültigen Features in diesem Dokument + + + Please create a feature first. + Bitte zuerst ein Element erstellen. + + + + Please select only one feature in an active body. + Bitte nur ein Element in einem aktiven Körper auswählen. + Part creation failed @@ -4104,11 +4186,26 @@ Du kannst die Teile später jederzeit mit 'Part Design -> Migrieren...' migri Task Hole Parameters Bohrungsparameter + + + <b>Threading and size</b> + <b>Gewinde und Größe</b> + + + + Profile + Profil + Whether the hole gets a thread Ob die Bohrung ein Gewinde bekommt + + + Threaded + Mit Gewinde versehen + Whether the hole gets a modelled thread @@ -4152,6 +4249,26 @@ Achtung, die Berechnung kann einige Zeit dauern! Custom Thread clearance value Wert des Spiels für benutzerdefinierte Gewinde + + + Direction + Richtung + + + + Right hand + Rechtshändig + + + + Left hand + Linkshändig + + + + Size + Größe + Hole clearance @@ -4178,16 +4295,44 @@ Nur für Bohrungen ohne Gewinde verfügbar Wide Weit + + + Class + Klasse + Tolerance class for threaded holes according to hole profile Toleranzklasse für Gewindebohrungen entsprechend dem Lochprofil + + + + Diameter + Durchmesser + Hole diameter Bohrungsdurchmesser + + + + Depth + Tiefe + + + + + Dimension + Abmessung + + + + Through all + Durch alles + Thread Depth @@ -4203,12 +4348,73 @@ Nur für Bohrungen ohne Gewinde verfügbar Tapped (DIN76) Gewindebohrung (DIN76) + + + <b>Hole cut</b> + <b>Bohrloch</b> + Type Typ + + + Cut type for screw heads + Art der Senkung für Schraubenköpfe + + + + Check to override the values predefined by the 'Type' + Auswählen, um die vom "Typ" festgelegten Standartwerte zu überschreiben + + + + Custom values + Benutzerdefinierte Werte + + + + Countersink angle + Winkel einer konischen Senkung + + + + <b>Drill point</b> + <b>Bohrspitze</b> + + + + Flat + Flach + + + + Angled + Winkelig + + + + The size of the drill point will be taken into +account for the depth of blind holes + Die Größe der Bohrspitze wird für die Tiefe der Sackbohrung mit berücksichtigt + + + + Take into account for depth + Für die Tiefe berücksichtigen + + + + <b>Misc</b> + <b>Sonstiges</b> + + + + Tapered + Kegelförmig + Taper angle for the hole @@ -4230,130 +4436,6 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Reversed Umgekehrt - - - - Diameter - Durchmesser - - - - - Depth - Tiefe - - - - Class - Klasse - - - - Cut type for screw heads - Art der Senkung für Schraubenköpfe - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Benutzerdefinierte Werte - - - - The size of the drill point will be taken into -account for the depth of blind holes - Die Größe der Bohrspitze wird für die Tiefe der Sackbohrung mit berücksichtigt - - - - Take into account for depth - Für die Tiefe berücksichtigen - - - - Tapered - Kegelförmig - - - - Direction - Richtung - - - - Flat - Flach - - - - Angled - Winkelig - - - - Right hand - Rechtshändig - - - - Left hand - Linkshändig - - - - Threaded - Mit Gewinde versehen - - - - Profile - Profil - - - - Countersink angle - Winkel einer konischen Senkung - - - - - Dimension - Abmessung - - - - Through all - Durch alles - - - - Size - Größe - - - - <b>Drill point</b> - <b>Bohrspitze</b> - - - - <b>Misc</b> - <b>Sonstiges</b> - - - - <b>Hole cut</b> - <b>Bohrloch</b> - - - - <b>Threading and size</b> - <b>Gewinde und Größe</b> - Normal @@ -4380,16 +4462,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Teile-Konstruktion - &Sketch &Skizze + + + &Part Design + &Teile-Konstruktion + Create a datum @@ -4403,7 +4485,7 @@ account for the depth of blind holes Create a subtractive feature - Abzuziehendes Objekte + Abzuziehende Objekte diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm index 581a5fcd22..7cce3f69a2 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index fca4398d97..910703e189 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Γεωμετρικά Θεμελιακά Στοιχεία - - - - Width: - Πλάτος: - Length: Μήκος: + + + + Width: + Πλάτος: + @@ -1005,12 +1087,6 @@ Height: Ύψος: - - - - Angle: - Γωνία: - @@ -1063,6 +1139,12 @@ Radius 2: Ακτίνα 2: + + + + Angle: + Γωνία: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Σημείο τέλους - Start point Σημείο εκκίνησης + + + End point + Σημείο τέλους + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Προσθήκη + + + Remove + Αφαίρεση + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Γωνία - - - Remove - Αφαίρεση - @@ -1714,6 +1796,11 @@ click again to end selection Add Προσθήκη + + + Remove + Αφαίρεση + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Ακτίνα: - - - Remove - Αφαίρεση - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Παράμετροι Οπών - - - - None - Κανένα - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Παράμετροι Οπών + + + + None + Κανένα + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Η επιλογή δεν βρίσκεται στο Ενεργό Σώμα - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Δεν υπάρχουν έγκυρα χαρακτηριστικά σε αυτό το έγγραφο + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Παράμετροι Οπών Εργασίας + + + <b>Threading and size</b> + <b>Σπείρωμα και μέγεθος</b> + + + + Profile + Προφίλ + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Με σπείρωμα + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Κατεύθυνση + + + + Right hand + Δεξιόστροφο + + + + Left hand + Αριστερόστροφο + + + + Size + Μέγεθος + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Κλάση + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Διάμετρος + Hole diameter Hole diameter + + + + Depth + Βάθος + + + + + Dimension + Διάσταση + + + + Through all + Μέσω όλων + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Περικοπή οπής</b> + Type Τύπος + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Γωνία κωνικής διεύρυνσης οπής + + + + <b>Drill point</b> + <b>Πυθμένας οπής</b> + + + + Flat + Επίπεδο + + + + Angled + Υπό γωνία + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Διάφορα</b> + + + + Tapered + Κωνικό + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Ανεστραμμένο - - - - Diameter - Διάμετρος - - - - - Depth - Βάθος - - - - Class - Κλάση - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Κωνικό - - - - Direction - Κατεύθυνση - - - - Flat - Επίπεδο - - - - Angled - Υπό γωνία - - - - Right hand - Δεξιόστροφο - - - - Left hand - Αριστερόστροφο - - - - Threaded - Με σπείρωμα - - - - Profile - Προφίλ - - - - Countersink angle - Γωνία κωνικής διεύρυνσης οπής - - - - - Dimension - Διάσταση - - - - Through all - Μέσω όλων - - - - Size - Μέγεθος - - - - <b>Drill point</b> - <b>Πυθμένας οπής</b> - - - - <b>Misc</b> - <b>Διάφορα</b> - - - - <b>Hole cut</b> - <b>Περικοπή οπής</b> - - - - <b>Threading and size</b> - <b>Σπείρωμα και μέγεθος</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm index 66b5b0efef..765ef9cfed 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index d70c50dad9..271381de4c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Engranaje envolvente... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Piñón... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -16,7 +98,7 @@ Sweep a selected sketch along a helix - Hacer un barrido al boceto seleccionado a lo largo de una hélice + Hacer un barrido al croquis seleccionado a lo largo de una hélice @@ -353,7 +435,7 @@ Set tip - Definir esquina + Definir punto de trabajo @@ -570,7 +652,7 @@ Sweep a selected sketch along a helix and remove it from the body - Hacer un barrido al boceto seleccionado a lo largo de una hélice y eliminarlo del cuerpo + Hacer un barrido al croquis seleccionado a lo largo de una hélice y eliminarlo del cuerpo @@ -606,7 +688,7 @@ Sweep a selected sketch along a path or to other profiles and remove it from the body - Vaciar del cuerpo un barrido del boceto seleccionado a través de una trayectoria u otros perfiles, + Vaciar del cuerpo un barrido del croquis seleccionado a través de una trayectoria u otros perfiles, @@ -984,18 +1066,18 @@ Geometric Primitives Primitivas geométricas - - - - Width: - Ancho: - Length: Longitud: + + + + Width: + Ancho: + @@ -1005,12 +1087,6 @@ Height: Altura: - - - - Angle: - Ángulo: - @@ -1063,6 +1139,12 @@ Radius 2: Radio 2: + + + + Angle: + Ángulo: + @@ -1232,16 +1314,16 @@ Si es cero, es igual a Radio2 Z: Z: - - - End point - Punto final - Start point Punto de inicio + + + End point + Punto final + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ haga clic de nuevo para finalizar la selección Add Añadir + + + Remove + Quitar + - select an item to highlight it @@ -1435,11 +1522,6 @@ haga clic de nuevo para finalizar la selección Angle Ángulo - - - Remove - Quitar - @@ -1714,6 +1796,11 @@ haga clic de nuevo para finalizar la selección Add Añadir + + + Remove + Quitar + - select an item to highlight it @@ -1726,11 +1813,6 @@ haga clic de nuevo para finalizar la selección Radius: Radio: - - - Remove - Quitar - @@ -1884,16 +1966,6 @@ haga clic de nuevo para finalizar la selección PartDesignGui::TaskHoleParameters - - - Hole parameters - Parámetros de taladro - - - - None - Nada - Counterbore @@ -1919,6 +1991,16 @@ haga clic de nuevo para finalizar la selección Cap screw (deprecated) Cabeza de tornillo (obsoleto) + + + Hole parameters + Parámetros de taladro + + + + None + Nada + ISO metric regular profile @@ -3283,6 +3365,11 @@ haga clic de nuevo para finalizar la selección Cannot use this command as there is no solid to subtract from. No se puede usar este comando ya que no hay un sólido del que restar. + + + Ensure that the body contains a feature before attempting a subtractive command. + Asegúrate de que el cuerpo contenga una característica antes de intentar un comando sustractivo. + Cannot use selected object. Selected object must belong to the active body @@ -3321,21 +3408,6 @@ haga clic de nuevo para finalizar la selección Select an edge, face, or body from a single body. Seleccione un borde, cara o cuerpo de un solo cuerpo. - - - Select an edge, face, or body from an active body. - Seleccione un borde, cara o cuerpo de un cuerpo activo. - - - - Please create a feature first. - Por favor, cree una característica primero. - - - - Please select only one feature in an active body. - Por favor, seleccione sólo una característica en un cuerpo activo. - @@ -3343,9 +3415,9 @@ haga clic de nuevo para finalizar la selección La selección no está en un Cuerpo Activo - - Ensure that the body contains a feature before attempting a subtractive command. - Asegúrate de que el cuerpo contenga una característica antes de intentar un comando sustractivo. + + Select an edge, face, or body from an active body. + Seleccione un borde, cara o cuerpo de un cuerpo activo. @@ -3372,6 +3444,16 @@ haga clic de nuevo para finalizar la selección No valid features in this document operaciones no válidas en este documento + + + Please create a feature first. + Por favor, cree una característica primero. + + + + Please select only one feature in an active body. + Por favor, seleccione sólo una característica en un cuerpo activo. + Part creation failed @@ -4102,11 +4184,26 @@ Aunque podrá migrar en cualquier momento después con 'Part Design -> Migrat Task Hole Parameters Parámetros de tarea taladro + + + <b>Threading and size</b> + <b>Roscado y tamaño</b> + + + + Profile + Perfíl + Whether the hole gets a thread Si el agujero tendrá rosca + + + Threaded + Roscado + Whether the hole gets a modelled thread @@ -4150,6 +4247,26 @@ Tenga en cuenta que el cálculo puede tomar algún tiempo Custom Thread clearance value Valor de holgura de rosca personalizado + + + Direction + Dirección + + + + Right hand + Mano derecha + + + + Left hand + Mano izquierda + + + + Size + Tamaño + Hole clearance @@ -4176,16 +4293,44 @@ Sólo disponible para agujeros sin rosca Wide Ancho + + + Class + Clase + Tolerance class for threaded holes according to hole profile Clase de tolerancia para los agujeros roscados según el perfil del agujero + + + + Diameter + Diámetro + Hole diameter Diámetro del agujero + + + + Depth + Profundidad + + + + + Dimension + Cota + + + + Through all + A través de todos + Thread Depth @@ -4201,12 +4346,74 @@ Sólo disponible para agujeros sin rosca Tapped (DIN76) Roscado (DIN76) + + + <b>Hole cut</b> + <b>Orificio de corte</b> + Type Tipo + + + Cut type for screw heads + Tipo de corte para cabezas de tornillo + + + + Check to override the values predefined by the 'Type' + Marcar para reemplazar los valores predefinidos por el 'Tipo' + + + + Custom values + Valores personalizados + + + + Countersink angle + Ángulo de avellanado + + + + <b>Drill point</b> + <b>Taladro del punto</b> + + + + Flat + Plano + + + + Angled + Angular + + + + The size of the drill point will be taken into +account for the depth of blind holes + El tamaño del punto de taladro se tendrá en cuenta en +la profundidad de los agujeros ciegos + + + + Take into account for depth + Tener en cuenta para profundidad + + + + <b>Misc</b> + <b>Miscelánea</b> + + + + Tapered + Cónica + Taper angle for the hole @@ -4228,131 +4435,6 @@ más de 90: radio de agujero más grande en la parte inferior Reversed Invertido - - - - Diameter - Diámetro - - - - - Depth - Profundidad - - - - Class - Clase - - - - Cut type for screw heads - Tipo de corte para cabezas de tornillo - - - - Check to override the values predefined by the 'Type' - Marcar para reemplazar los valores predefinidos por el 'Tipo' - - - - Custom values - Valores personalizados - - - - The size of the drill point will be taken into -account for the depth of blind holes - El tamaño del punto de taladro se tendrá en cuenta en -la profundidad de los agujeros ciegos - - - - Take into account for depth - Tener en cuenta para profundidad - - - - Tapered - Cónica - - - - Direction - Dirección - - - - Flat - Plano - - - - Angled - Angular - - - - Right hand - Mano derecha - - - - Left hand - Mano izquierda - - - - Threaded - Roscado - - - - Profile - Perfíl - - - - Countersink angle - Ángulo de avellanado - - - - - Dimension - Cota - - - - Through all - A través de todos - - - - Size - Tamaño - - - - <b>Drill point</b> - <b>Taladro del punto</b> - - - - <b>Misc</b> - <b>Miscelánea</b> - - - - <b>Hole cut</b> - <b>Orificio de corte</b> - - - - <b>Threading and size</b> - <b>Roscado y tamaño</b> - Normal @@ -4379,16 +4461,16 @@ la profundidad de los agujeros ciegos Workbench - - - &Part Design - &Part Design - &Sketch &Croquis + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm index a73bfacc4d..2f583eeefe 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 5a131c6b34..9fcce9edd7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -740,17 +822,17 @@ Edit ShapeBinder - Edit ShapeBinder + Editatu forma-zorroa Create ShapeBinder - Create ShapeBinder + Sortu forma-zorroa Create SubShapeBinder - Create SubShapeBinder + Sortu forma-azpizorroa @@ -791,7 +873,7 @@ Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Migratu piezen diseinu zaharren elementuak gorputzetara @@ -821,7 +903,7 @@ Make LinearPattern - Make LinearPattern + Sortu eredu lineala @@ -943,10 +1025,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Eskatutako elementua ezin izan da sortu. Zergatia honakoa izan daiteke: + - gorputz aktiboak ez du oinarri-formarik, + beraz ez dago kentzeko materialik; + - hautatutako krokisa ez da gorputz aktiboarena. @@ -957,10 +1039,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Eskatutako elementua ezin izan da sortu. Zergatia honakoa izan daiteke: + - gorputz aktiboak ez du oinarri-formarik, + beraz ez dago kentzeko materialik; + - hautatutako krokisa ez da gorputz aktiboarena. @@ -971,10 +1053,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Eskatutako elementua ezin izan da sortu. Zergatia honakoa izan daiteke: + - gorputz aktiboak ez du oinarri-formarik, + beraz ez dago kentzeko materialik; + - hautatutako krokisa ez da gorputz aktiboarena. @@ -984,18 +1066,18 @@ Geometric Primitives Jatorrizko geometrikoak - - - - Width: - Zabalera: - Length: Luzera: + + + + Width: + Zabalera: + @@ -1005,12 +1087,6 @@ Height: Altuera: - - - - Angle: - Angelua: - @@ -1063,6 +1139,12 @@ Radius 2: 2. erradioa: + + + + Angle: + Angelua: + @@ -1093,8 +1175,8 @@ Radius in local y-direction If zero, it is equal to Radius2 - Radius in local y-direction -If zero, it is equal to Radius2 + Erradioa Y norabide lokalean +Zero bada, 2. erradioaren berdina da @@ -1105,12 +1187,12 @@ If zero, it is equal to Radius2 Radius in local xy-plane - Radius in local xy-plane + Erradioa XY plano lokalean Radius in local xz-plane - Radius in local xz-plane + Erradioa XZ plano lokalean @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Amaierako puntua - Start point Hasierako puntua + + + End point + Amaierako puntua + PartDesignGui::DlgReference @@ -1253,7 +1335,7 @@ If zero, it is equal to Radius2 You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. - You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. + Gorputz aktiboaren parte ez diren geometriak hautatu dituzu. Definitu nola maneiatuko diren hautapen horiek. Erreferentzia horiek nahi ez badituzu, utzi komandoa. @@ -1332,34 +1414,34 @@ If zero, it is equal to Radius2 Cone radii are equal - Cone radii are equal + Konoaren erradioak berdinak dira The radii for cones must not be equal! - The radii for cones must not be equal! + Konoen erradioek ez dute berdinak izan behar! Invalid wedge parameters - Invalid wedge parameters + Falka-parametro baliogabeak X min must not be equal to X max! - X min must not be equal to X max! + X minimoak eta X maximoak ez dute berdinak izan behar! Y min must not be equal to Y max! - Y min must not be equal to Y max! + Y minimoak eta Y maximoak ez dute berdinak izan behar! Z min must not be equal to Z max! - Z min must not be equal to Z max! + Z minimoak eta Z maximoak ez dute berdinak izan behar! @@ -1380,14 +1462,19 @@ If zero, it is equal to Radius2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Sakatu botoia hautapen-moduan sartzeko, +sakatu berriro hautapena amaitzeko Add Gehitu + + + Remove + Kendu + - select an item to highlight it @@ -1428,18 +1515,13 @@ click again to end selection Size 2 - Size 2 + 2. tamaina Angle Angelua - - - Remove - Kendu - @@ -1527,8 +1609,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Sakatu botoia hautapen-moduan sartzeko, +sakatu berriro hautapena amaitzeko @@ -1706,14 +1788,19 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Sakatu botoia hautapen-moduan sartzeko, +sakatu berriro hautapena amaitzeko Add Gehitu + + + Remove + Kendu + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Erradioa: - - - Remove - Kendu - @@ -1814,22 +1896,22 @@ click again to end selection Pitch-Height-Angle - Pitch-Height-Angle + Buruzkatzea-Altuera-Angelua Pitch-Turns-Angle - Pitch-Turns-Angle + Buruzkatzea-Birak-Angelua Height-Turns-Angle - Height-Turns-Angle + Altuera-Birak-Angelua Height-Turns-Growth - Height-Turns-Growth + Altuera-Birak-Hazkuntza @@ -1844,7 +1926,7 @@ click again to end selection Turns: - Turns: + Birak: @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Zulo-parametroak - - - - None - Bat ere ez - Counterbore @@ -1919,10 +1991,20 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Zulo-parametroak + + + + None + Bat ere ez + ISO metric regular profile - ISO metric regular profile + ISO profil metriko erregularra @@ -1965,7 +2047,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Zerrenda ordenatzeko, arrastatu elementuak @@ -2048,7 +2130,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Zerrenda ordenatzeko, arrastatu elementuak @@ -2086,7 +2168,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Zerrenda ordenatzeko, arrastatu elementuak @@ -2134,7 +2216,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Zerrenda ordenatzeko, arrastatu elementuak @@ -2231,7 +2313,7 @@ the sketch plane's normal vector will be used Use custom direction - Use custom direction + Erabili norabide pertsonalizatua @@ -2241,7 +2323,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + Norabide-bektorearen X osagaia @@ -2251,7 +2333,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + Norabide-bektorearen Y osagaia @@ -2261,7 +2343,7 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + Norabide-bektorearen Z osagaia @@ -2681,7 +2763,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Zerrenda ordenatzeko, arrastatu elementuak @@ -2896,8 +2978,8 @@ measured along the specified direction Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Sakatu botoia hautapen-moduan sartzeko, +sakatu berriro hautapena amaitzeko @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Ezin da komando hau erabili, ez baitago solidorik kenketa egiteko. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Hautatu gorputz bakar bateko ertz, aurpegi edo beste gorputz bat. - - - Select an edge, face, or body from an active body. - Hautatu gorputz aktibo bateko ertz, aurpegi edo beste gorputz bat. - - - - Please create a feature first. - Mesedez, sortu lehenengo elementu bat. - - - - Please select only one feature in an active body. - Hautatu gorputz aktibo bateko elementu bakar bat. - @@ -3344,9 +3416,9 @@ click again to end selection Hautapena ez da gorputz aktiboa - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Hautatu gorputz aktibo bateko ertz, aurpegi edo beste gorputz bat. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Ez dago baliozko elementurik dokumentu honetan + + + Please create a feature first. + Mesedez, sortu lehenengo elementu bat. + + + + Please select only one feature in an active body. + Hautatu gorputz aktibo bateko elementu bakar bat. + Part creation failed @@ -4106,11 +4188,26 @@ Geroago ere egin dezakezu migrazioa, 'Part Design -> Migratu' erabilita.Task Hole Parameters Ataza-zuloaren parametroak + + + <b>Threading and size</b> + <b>Hariak eta tamaina</b> + + + + Profile + Profila + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Harilkatua + Whether the hole gets a modelled thread @@ -4154,6 +4251,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Norabidea + + + + Right hand + Eskuineko eskua + + + + Left hand + Ezkerreko eskua + + + + Size + Tamaina + Hole clearance @@ -4180,16 +4297,44 @@ Only available for holes without thread Wide Wide + + + Class + Klasea + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diametroa + Hole diameter Zulo-diametroa + + + + Depth + Sakonera + + + + + Dimension + Kota + + + + Through all + Guztien zehar + Thread Depth @@ -4205,12 +4350,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Zulo-mozketa</b> + Type Mota + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Balio pertsonalizatuak + + + + Countersink angle + Abeilanatze konikoaren angelua + + + + <b>Drill point</b> + <b>Zulatze-puntua</b> + + + + Flat + Laua + + + + Angled + Angeluduna + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Denetarik</b> + + + + Tapered + Konikoa + Taper angle for the hole @@ -4232,131 +4439,6 @@ over 90: larger hole radius at the bottom Reversed Alderantzikatua - - - - Diameter - Diametroa - - - - - Depth - Sakonera - - - - Class - Klasea - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Balio pertsonalizatuak - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Konikoa - - - - Direction - Norabidea - - - - Flat - Laua - - - - Angled - Angeluduna - - - - Right hand - Eskuineko eskua - - - - Left hand - Ezkerreko eskua - - - - Threaded - Harilkatua - - - - Profile - Profila - - - - Countersink angle - Abeilanatze konikoaren angelua - - - - - Dimension - Kota - - - - Through all - Guztien zehar - - - - Size - Tamaina - - - - <b>Drill point</b> - <b>Zulatze-puntua</b> - - - - <b>Misc</b> - <b>Denetarik</b> - - - - <b>Hole cut</b> - <b>Zulo-mozketa</b> - - - - <b>Threading and size</b> - <b>Hariak eta tamaina</b> - Normal @@ -4383,16 +4465,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Piezen diseinua - &Sketch &Krokisa + + + &Part Design + &Piezen diseinua + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm index 8464b7d7ab..e70b9f321e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index 7789fcc88c..ae9812f031 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometrinen primitiivi - - - - Width: - Leveys: - Length: Pituus: + + + + Width: + Leveys: + @@ -1005,12 +1087,6 @@ Height: Korkeus: - - - - Angle: - Kulma: - @@ -1063,6 +1139,12 @@ Radius 2: Säde 2: + + + + Angle: + Kulma: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Päätepiste - Start point Alkupiste + + + End point + Päätepiste + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Lisää + + + Remove + Poista + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Kulma - - - Remove - Poista - @@ -1714,6 +1796,11 @@ click again to end selection Add Lisää + + + Remove + Poista + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Säde: - - - Remove - Poista - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Reikäparametrit - - - - None - Ei mitään - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Reikäparametrit + + + + None + Ei mitään + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Valittu objekti ei ole aktiivisessa kappaleessa - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Tässä asiakirjassa ei ole käypiä ominaisuuksia + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4107,11 +4189,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Reikäparametrit + + + <b>Threading and size</b> + <b>Kierre ja koko</b> + + + + Profile + Profiili + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Kierteytetty + Whether the hole gets a modelled thread @@ -4155,6 +4252,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Suunta + + + + Right hand + Oikeakätinen + + + + Left hand + Vasenkätinen + + + + Size + Koko + Hole clearance @@ -4181,16 +4298,44 @@ Only available for holes without thread Wide Wide + + + Class + Luokka + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Halkaisija + Hole diameter Hole diameter + + + + Depth + Syvyys + + + + + Dimension + Mitta + + + + Through all + Läpi + Thread Depth @@ -4206,12 +4351,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Reiän leikkaus</b> + Type Tyyppi + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Upotusporauksen kulma + + + + <b>Drill point</b> + <b>Porauspiste</b> + + + + Flat + Litteä + + + + Angled + Kulmassa + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Sekalaiset</b> + + + + Tapered + Suippeneva + Taper angle for the hole @@ -4233,131 +4440,6 @@ over 90: larger hole radius at the bottom Reversed Käänteinen - - - - Diameter - Halkaisija - - - - - Depth - Syvyys - - - - Class - Luokka - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Suippeneva - - - - Direction - Suunta - - - - Flat - Litteä - - - - Angled - Kulmassa - - - - Right hand - Oikeakätinen - - - - Left hand - Vasenkätinen - - - - Threaded - Kierteytetty - - - - Profile - Profiili - - - - Countersink angle - Upotusporauksen kulma - - - - - Dimension - Mitta - - - - Through all - Läpi - - - - Size - Koko - - - - <b>Drill point</b> - <b>Porauspiste</b> - - - - <b>Misc</b> - <b>Sekalaiset</b> - - - - <b>Hole cut</b> - <b>Reiän leikkaus</b> - - - - <b>Threading and size</b> - <b>Kierre ja koko</b> - Normal @@ -4384,16 +4466,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm index 477a0f17ed..f513b924b8 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts index a319dbc8a6..78a1fa5599 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometric Primitives - - - - Width: - Lapad: - Length: Length: + + + + Width: + Lapad: + @@ -1005,12 +1087,6 @@ Height: Taas: - - - - Angle: - Anggulo: - @@ -1063,6 +1139,12 @@ Radius 2: Radius 2: + + + + Angle: + Anggulo: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Dulong point - Start point Simulang point + + + End point + Dulong point + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Magdugtong + + + Remove + Ihiwalay + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Anggulo - - - Remove - Ihiwalay - @@ -1715,6 +1797,11 @@ click again to end selection Add Magdugtong + + + Remove + Ihiwalay + - select an item to highlight it @@ -1727,11 +1814,6 @@ click again to end selection Radius: Radius: - - - Remove - Ihiwalay - @@ -1885,16 +1967,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Mga parameter ng Hole - - - - None - Wala - Counterbore @@ -1920,6 +1992,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Mga parameter ng Hole + + + + None + Wala + ISO metric regular profile @@ -3285,6 +3367,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3323,21 +3410,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3345,9 +3417,9 @@ click again to end selection Ang napili ay wala sa Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3374,6 +3446,16 @@ click again to end selection No valid features in this document Walang valid na mga feature sa dokumentong ito + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4109,11 +4191,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Mga Parameter ng Task Hole + + + <b>Threading and size</b> + <b>Threading at sukat</b> + + + + Profile + Profile + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4157,6 +4254,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Direksyon + + + + Right hand + Kanang kamay + + + + Left hand + Kaliwang kamay + + + + Size + Sukat + Hole clearance @@ -4183,16 +4300,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diyametro + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + Sukat + + + + Through all + Sa pamamagitan ng lahat + Thread Depth @@ -4208,12 +4353,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Uri + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4235,131 +4442,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Diyametro - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Direksyon - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Kanang kamay - - - - Left hand - Kaliwang kamay - - - - Threaded - Threaded - - - - Profile - Profile - - - - Countersink angle - Countersink angle - - - - - Dimension - Sukat - - - - Through all - Sa pamamagitan ng lahat - - - - Size - Sukat - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading at sukat</b> - Normal @@ -4386,16 +4468,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm index 3b516ab33d..4b38de79da 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index 5ca0300bb1..fee25c0b23 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Engrenage à développante... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Pignon... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitives géométriques - - - - Width: - Largeur : - Length: Longueur : + + + + Width: + Largeur : + @@ -1005,12 +1087,6 @@ Height: Hauteur : - - - - Angle: - Angle : - @@ -1063,6 +1139,12 @@ Radius 2: Rayon 2 : + + + + Angle: + Angle : + @@ -1231,16 +1313,16 @@ If zero, it is equal to Radius2 Z: Z : - - - End point - Point final - Start point Point de départ + + + End point + Point final + PartDesignGui::DlgReference @@ -1386,6 +1468,11 @@ click again to end selection Add Ajouter + + + Remove + Enlever + - select an item to highlight it @@ -1433,11 +1520,6 @@ click again to end selection Angle Angle - - - Remove - Enlever - @@ -1710,6 +1792,11 @@ click again to end selection Add Ajouter + + + Remove + Enlever + - select an item to highlight it @@ -1722,11 +1809,6 @@ click again to end selection Radius: Rayon : - - - Remove - Enlever - @@ -1880,16 +1962,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Paramètres de perçage - - - - None - Aucun - Counterbore @@ -1915,6 +1987,16 @@ click again to end selection Cap screw (deprecated) Vis à tête creuse (dépréciée) + + + Hole parameters + Paramètres de perçage + + + + None + Aucun + ISO metric regular profile @@ -3279,6 +3361,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Impossible d'utiliser cette commande car il n'y a pas de solide à soustraire. + + + Ensure that the body contains a feature before attempting a subtractive command. + Assurez-vous que le corps contient une fonctionnalité avant de tenter une commande soustractive. + Cannot use selected object. Selected object must belong to the active body @@ -3317,21 +3404,6 @@ click again to end selection Select an edge, face, or body from a single body. Sélectionnez une arête, une face ou un corps d'un corps unique. - - - Select an edge, face, or body from an active body. - Sélectionnez une arête, une face ou un corps d'un corps actif. - - - - Please create a feature first. - Veuillez d'abord créer une fonction. - - - - Please select only one feature in an active body. - Veuillez sélectionner une seule fonction d'un corps actif. - @@ -3339,9 +3411,9 @@ click again to end selection La sélection n’est pas dans le corps actif - - Ensure that the body contains a feature before attempting a subtractive command. - Assurez-vous que le corps contient une fonctionnalité avant de tenter une commande soustractive. + + Select an edge, face, or body from an active body. + Sélectionnez une arête, une face ou un corps d'un corps actif. @@ -3368,6 +3440,16 @@ click again to end selection No valid features in this document Aucune fonction valide dans ce document + + + Please create a feature first. + Veuillez d'abord créer une fonction. + + + + Please select only one feature in an active body. + Veuillez sélectionner une seule fonction d'un corps actif. + Part creation failed @@ -4095,11 +4177,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Paramètres du perçage + + + <b>Threading and size</b> + <b>Filetage et taille</b> + + + + Profile + Profil + Whether the hole gets a thread Si le trou reçoit un filetage + + + Threaded + Fileté + Whether the hole gets a modelled thread @@ -4143,6 +4240,26 @@ Notez que le calcul peut prendre un certain temps Custom Thread clearance value Valeur du dégagement du taraudage personnalisé + + + Direction + Direction + + + + Right hand + Pas à droite + + + + Left hand + Pas à gauche + + + + Size + Taille + Hole clearance @@ -4168,16 +4285,44 @@ Only available for holes without thread Wide Large + + + Class + Classe + Tolerance class for threaded holes according to hole profile Classe de tolérance pour les trous filetés selon le profil du trou + + + + Diameter + Diamètre + Hole diameter Diamètre du trou + + + + Depth + Profondeur + + + + + Dimension + Dimension + + + + Through all + À travers tout + Thread Depth @@ -4193,12 +4338,74 @@ Only available for holes without thread Tapped (DIN76) Tarraudé (DIN76) + + + <b>Hole cut</b> + <b>Découpe du trou</b> + Type Type + + + Cut type for screw heads + Type de coupe pour les têtes de vis + + + + Check to override the values predefined by the 'Type' + Cochez cette case pour remplacer les valeurs prédéfinies par le 'Type' + + + + Custom values + Valeurs personnalisées + + + + Countersink angle + Angle de fraisage + + + + <b>Drill point</b> + <b>Pointe de perçage</b> + + + + Flat + Plat + + + + Angled + En angle + + + + The size of the drill point will be taken into +account for the depth of blind holes + La taille de la pointe du foret sera prise en compte +compte pour la profondeur des trous borgnes + + + + Take into account for depth + Tenir compte de la profondeur + + + + <b>Misc</b> + <b>Divers</b> + + + + Tapered + Conique + Taper angle for the hole @@ -4220,131 +4427,6 @@ plus de 90 : rayon du trou plus grand à la base Reversed Inversé - - - - Diameter - Diamètre - - - - - Depth - Profondeur - - - - Class - Classe - - - - Cut type for screw heads - Type de coupe pour les têtes de vis - - - - Check to override the values predefined by the 'Type' - Cochez cette case pour remplacer les valeurs prédéfinies par le 'Type' - - - - Custom values - Valeurs personnalisées - - - - The size of the drill point will be taken into -account for the depth of blind holes - La taille de la pointe du foret sera prise en compte -compte pour la profondeur des trous borgnes - - - - Take into account for depth - Tenir compte de la profondeur - - - - Tapered - Conique - - - - Direction - Direction - - - - Flat - Plat - - - - Angled - En angle - - - - Right hand - Pas à droite - - - - Left hand - Pas à gauche - - - - Threaded - Fileté - - - - Profile - Profil - - - - Countersink angle - Angle de fraisage - - - - - Dimension - Dimension - - - - Through all - À travers tout - - - - Size - Taille - - - - <b>Drill point</b> - <b>Pointe de perçage</b> - - - - <b>Misc</b> - <b>Divers</b> - - - - <b>Hole cut</b> - <b>Découpe du trou</b> - - - - <b>Threading and size</b> - <b>Filetage et taille</b> - Normal @@ -4371,16 +4453,16 @@ compte pour la profondeur des trous borgnes Workbench - - - &Part Design - &Conception de pièces - &Sketch &Esquisse + + + &Part Design + &Conception de pièces + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm index e380bcbe67..33378fe2b7 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts index dc4b325753..21bab72b04 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitivas xeométricas - - - - Width: - Ancho: - Length: Lonxitude: + + + + Width: + Ancho: + @@ -1005,12 +1087,6 @@ Height: Alto: - - - - Angle: - Ángulo: - @@ -1063,6 +1139,12 @@ Radius 2: Raio 2: + + + + Angle: + Ángulo: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Punto final - Start point Punto Inicial + + + End point + Punto final + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Engadir + + + Remove + Rexeitar + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Ángulo - - - Remove - Rexeitar - @@ -1714,6 +1796,11 @@ click again to end selection Add Engadir + + + Remove + Rexeitar + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Radio: - - - Remove - Rexeitar - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Parámetros de burato - - - - None - Ningún - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parámetros de burato + + + + None + Ningún + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Sen Corpo Activo escolmado - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Non hai recursos válidos neste documento + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4107,11 +4189,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parámetros do burato de tarea + + + <b>Threading and size</b> + <b>Roscado e tamaño</b> + + + + Profile + Perfil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Aparafusado + Whether the hole gets a modelled thread @@ -4155,6 +4252,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Dirección + + + + Right hand + Á dereita + + + + Left hand + Á esquerda + + + + Size + Tamaño + Hole clearance @@ -4181,16 +4298,44 @@ Only available for holes without thread Wide Wide + + + Class + Clase + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diámetro + Hole diameter Hole diameter + + + + Depth + Fondura + + + + + Dimension + Acoutamento + + + + Through all + A través de todos + Thread Depth @@ -4206,12 +4351,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Corte de burato</b> + Type Tipo + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Ángulo de abelanado + + + + <b>Drill point</b> + <b>Furar Punto</b> + + + + Flat + Cha + + + + Angled + Angular + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Miscelánea</b> + + + + Tapered + Cónico + Taper angle for the hole @@ -4233,131 +4440,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Diámetro - - - - - Depth - Fondura - - - - Class - Clase - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Cónico - - - - Direction - Dirección - - - - Flat - Cha - - - - Angled - Angular - - - - Right hand - Á dereita - - - - Left hand - Á esquerda - - - - Threaded - Aparafusado - - - - Profile - Perfil - - - - Countersink angle - Ángulo de abelanado - - - - - Dimension - Acoutamento - - - - Through all - A través de todos - - - - Size - Tamaño - - - - <b>Drill point</b> - <b>Furar Punto</b> - - - - <b>Misc</b> - <b>Miscelánea</b> - - - - <b>Hole cut</b> - <b>Corte de burato</b> - - - - <b>Threading and size</b> - <b>Roscado e tamaño</b> - Normal @@ -4384,16 +4466,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm index ca61b7ad2e..cd7a4b26c9 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index e75c63529b..254feff517 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometrijski primitivi - - - - Width: - Širina: - Length: Duljina: + + + + Width: + Širina: + @@ -1005,12 +1087,6 @@ Height: Visina: - - - - Angle: - Kut: - @@ -1063,6 +1139,12 @@ Radius 2: Polumjer 2: + + + + Angle: + Kut: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Konačna točka - Start point očetna točka + + + End point + Konačna točka + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Dodaj + + + Remove + Ukloniti + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Kut - - - Remove - Ukloniti - @@ -1714,6 +1796,11 @@ click again to end selection Add Dodaj + + + Remove + Ukloniti + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Polumjer: - - - Remove - Ukloniti - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Rupa parametri - - - - None - Nijedan - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Rupa parametri + + + + None + Nijedan + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Označeno nije u aktivnom tijelu - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Nema valjanih elemenata u ovom dokumentu + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4107,11 +4189,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Zadani parametri rupe + + + <b>Threading and size</b> + <b>navoj i veličina</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + S navojem + Whether the hole gets a modelled thread @@ -4155,6 +4252,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Smjer + + + + Right hand + Desna ruka + + + + Left hand + Lijeva ruka + + + + Size + Veličina + Hole clearance @@ -4181,16 +4298,44 @@ Only available for holes without thread Wide Wide + + + Class + Klasa + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Promjer + Hole diameter Hole diameter + + + + Depth + Dubina + + + + + Dimension + Dimenzija + + + + Through all + Kroz sve + Thread Depth @@ -4206,12 +4351,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>rupa od</b> + Type Tip + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Kut kose rupe za glavu šarafa + + + + <b>Drill point</b> + <b>točka bušenja</b> + + + + Flat + Ravno + + + + Angled + Pod kutom + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>ostalo</b> + + + + Tapered + Konusno + Taper angle for the hole @@ -4233,131 +4440,6 @@ over 90: larger hole radius at the bottom Reversed Obrnuti - - - - Diameter - Promjer - - - - - Depth - Dubina - - - - Class - Klasa - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Konusno - - - - Direction - Smjer - - - - Flat - Ravno - - - - Angled - Pod kutom - - - - Right hand - Desna ruka - - - - Left hand - Lijeva ruka - - - - Threaded - S navojem - - - - Profile - Profil - - - - Countersink angle - Kut kose rupe za glavu šarafa - - - - - Dimension - Dimenzija - - - - Through all - Kroz sve - - - - Size - Veličina - - - - <b>Drill point</b> - <b>točka bušenja</b> - - - - <b>Misc</b> - <b>ostalo</b> - - - - <b>Hole cut</b> - <b>rupa od</b> - - - - <b>Threading and size</b> - <b>navoj i veličina</b> - Normal @@ -4384,16 +4466,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm index 4ad7664f73..cf96cda368 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 4c83ee61f7..c786f7c7cc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Evolvent fogazott kerék... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Lánckerék... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -981,18 +1063,18 @@ Geometric Primitives Geometriai alaptest - - - - Width: - Szélesség: - Length: Hossz: + + + + Width: + Szélesség: + @@ -1002,12 +1084,6 @@ Height: Magasság: - - - - Angle: - Dőlésszög: - @@ -1060,6 +1136,12 @@ Radius 2: Sugár 2: + + + + Angle: + Dőlésszög: + @@ -1229,16 +1311,16 @@ Ha zérus, azonos a Radius2-vel (2. sugárral?) Z: Z: - - - End point - Végpont - Start point Kezdőpont + + + End point + Végpont + PartDesignGui::DlgReference @@ -1384,6 +1466,11 @@ click again to end selection Add Hozzáad + + + Remove + Törlés + - select an item to highlight it @@ -1431,11 +1518,6 @@ click again to end selection Angle Szög - - - Remove - Törlés - @@ -1708,6 +1790,11 @@ click again to end selection Add Hozzáad + + + Remove + Törlés + - select an item to highlight it @@ -1720,11 +1807,6 @@ click again to end selection Radius: Sugár: - - - Remove - Törlés - @@ -1878,16 +1960,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Furat paraméterek - - - - None - Egyik sem - Counterbore @@ -1913,6 +1985,16 @@ click again to end selection Cap screw (deprecated) Hatlapfejű csavar (elavult) + + + Hole parameters + Furat paraméterek + + + + None + Egyik sem + ISO metric regular profile @@ -3275,6 +3357,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Ez a parancs nem használható, mert nincs olyan tömör test, amiből ki lehet vonni. + + + Ensure that the body contains a feature before attempting a subtractive command. + Kivonási parancs kiadása előtt a testnek kell, hogy legyen jellemzője. + Cannot use selected object. Selected object must belong to the active body @@ -3313,21 +3400,6 @@ click again to end selection Select an edge, face, or body from a single body. Egyetlen testből jelöljön ki egy élet, felszínt vagy testet. - - - Select an edge, face, or body from an active body. - Az aktív testből jelöljön ki egy élet, felszínt vagy testet. - - - - Please create a feature first. - Először hozzon létre egy jellemzőt. - - - - Please select only one feature in an active body. - Az aktív testben csak egyetlen jellemzőt jelöljön ki. - @@ -3335,9 +3407,9 @@ click again to end selection Kijelölés nem szerepel az aktív testben - - Ensure that the body contains a feature before attempting a subtractive command. - Kivonási parancs kiadása előtt a testnek kell, hogy legyen jellemzője. + + Select an edge, face, or body from an active body. + Az aktív testből jelöljön ki egy élet, felszínt vagy testet. @@ -3364,6 +3436,16 @@ click again to end selection No valid features in this document Ezen dokumentumon nincs érvényes funkció meghatározva + + + Please create a feature first. + Először hozzon létre egy jellemzőt. + + + + Please select only one feature in an active body. + Az aktív testben csak egyetlen jellemzőt jelöljön ki. + Part creation failed @@ -4097,11 +4179,26 @@ Viszont később is bármikor migrálhat a "Alkatrész Tervezés -> Migrálá Task Hole Parameters Feladat furat paraméterek + + + <b>Threading and size</b> + <b>Menet és méret</b> + + + + Profile + Profil + Whether the hole gets a thread Van-e menet a lyukban + + + Threaded + Menetes + Whether the hole gets a modelled thread @@ -4145,6 +4242,26 @@ Megjegyzés: a számítás eltarthat egy ideig Custom Thread clearance value A hézag mértéke egyéni menethez + + + Direction + Irány + + + + Right hand + Jobb menet + + + + Left hand + Balmenet + + + + Size + Méret + Hole clearance @@ -4171,16 +4288,44 @@ Csak menet nélküli furatokhoz érhető el Wide Széles + + + Class + Tűrési osztály + Tolerance class for threaded holes according to hole profile Menetes furatok tűrési osztálya a furatprofil szerint + + + + Diameter + Átmérő + Hole diameter Furatátmérő + + + + Depth + Mélység + + + + + Dimension + Dimenzió + + + + Through all + Mindenen keresztül + Thread Depth @@ -4196,12 +4341,74 @@ Csak menet nélküli furatokhoz érhető el Tapped (DIN76) Beszúrt (DIN76) + + + <b>Hole cut</b> + <b>Süllyesztés</b> + Type Típus + + + Cut type for screw heads + Csavarfejek vágási típusa + + + + Check to override the values predefined by the 'Type' + Ellenőrizze, hogy felülbírálja-e a 'Típus' által előre meghatározott értékeket + + + + Custom values + Egyedi értékek + + + + Countersink angle + Ellen furat dőlésszög + + + + <b>Drill point</b> + <b>Fúró pont</b> + + + + Flat + Lapos + + + + Angled + Kúpos + + + + The size of the drill point will be taken into +account for the depth of blind holes + A fúrópont méretét figyelembe vesszük +a vak lyukak mélységéhez + + + + Take into account for depth + Vegye figyelembe a mélységhez + + + + <b>Misc</b> + <b>Egyéb</b> + + + + Tapered + Kúposság + Taper angle for the hole @@ -4223,131 +4430,6 @@ over 90: larger hole radius at the bottom Reversed Fordított - - - - Diameter - Átmérő - - - - - Depth - Mélység - - - - Class - Tűrési osztály - - - - Cut type for screw heads - Csavarfejek vágási típusa - - - - Check to override the values predefined by the 'Type' - Ellenőrizze, hogy felülbírálja-e a 'Típus' által előre meghatározott értékeket - - - - Custom values - Egyedi értékek - - - - The size of the drill point will be taken into -account for the depth of blind holes - A fúrópont méretét figyelembe vesszük -a vak lyukak mélységéhez - - - - Take into account for depth - Vegye figyelembe a mélységhez - - - - Tapered - Kúposság - - - - Direction - Irány - - - - Flat - Lapos - - - - Angled - Kúpos - - - - Right hand - Jobb menet - - - - Left hand - Balmenet - - - - Threaded - Menetes - - - - Profile - Profil - - - - Countersink angle - Ellen furat dőlésszög - - - - - Dimension - Dimenzió - - - - Through all - Mindenen keresztül - - - - Size - Méret - - - - <b>Drill point</b> - <b>Fúró pont</b> - - - - <b>Misc</b> - <b>Egyéb</b> - - - - <b>Hole cut</b> - <b>Süllyesztés</b> - - - - <b>Threading and size</b> - <b>Menet és méret</b> - Normal @@ -4374,16 +4456,16 @@ a vak lyukak mélységéhez Workbench - - - &Part Design - &Alkatrész tervezés - &Sketch &Vázlat + + + &Part Design + &Alkatrész tervezés + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm index fcfa933009..dce7fb2c76 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts index a501a70abf..d33adc003f 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometris Primitif - - - - Width: - Lebar: - Length: Length: + + + + Width: + Lebar: + @@ -1005,12 +1087,6 @@ Height: Tinggi: - - - - Angle: - Sudut: - @@ -1063,6 +1139,12 @@ Radius 2: Radius 2: + + + + Angle: + Sudut: + @@ -1232,16 +1314,16 @@ Jika nol, sama dengan Radius2 Z: Z: - - - End point - Titik akhir - Start point Mulai titik + + + End point + Titik akhir + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ klik lagi untuk mengakhiri seleksi Add Menambahkan + + + Remove + Menghapus + - select an item to highlight it @@ -1435,11 +1522,6 @@ klik lagi untuk mengakhiri seleksi Angle Sudut - - - Remove - Menghapus - @@ -1714,6 +1796,11 @@ klik lagi untuk mengakhiri seleksi Add Menambahkan + + + Remove + Menghapus + - select an item to highlight it @@ -1726,11 +1813,6 @@ klik lagi untuk mengakhiri seleksi Radius: Radius: - - - Remove - Menghapus - @@ -1884,16 +1966,6 @@ klik lagi untuk mengakhiri seleksi PartDesignGui::TaskHoleParameters - - - Hole parameters - Parameter lubang - - - - None - Tidak ada - Counterbore @@ -1919,6 +1991,16 @@ klik lagi untuk mengakhiri seleksi Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parameter lubang + + + + None + Tidak ada + ISO metric regular profile @@ -3284,6 +3366,11 @@ klik lagi untuk mengakhiri seleksi Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ klik lagi untuk mengakhiri seleksi Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ klik lagi untuk mengakhiri seleksi Seleksi tidak di Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ klik lagi untuk mengakhiri seleksi No valid features in this document Tidak ada fitur yang valid dalam dokumen ini + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parameter Lubang Tugas + + + <b>Threading and size</b> + <b>Threading dan ukuran</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Arah + + + + Right hand + Tangan kanan + + + + Left hand + Tangan kiri + + + + Size + Ukuran + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Kelas + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Kedalaman + + + + + Dimension + Dimensi + + + + Through all + Melalui semua + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Lubang dipotong</b> + Type Jenis + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Sudut Countersink + + + + <b>Drill point</b> + <b> Titik bor </ b> + + + + Flat + Datar + + + + Angled + Miring + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</ b> + + + + Tapered + Meruncing + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Diameter - - - - - Depth - Kedalaman - - - - Class - Kelas - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Meruncing - - - - Direction - Arah - - - - Flat - Datar - - - - Angled - Miring - - - - Right hand - Tangan kanan - - - - Left hand - Tangan kiri - - - - Threaded - Threaded - - - - Profile - Profil - - - - Countersink angle - Sudut Countersink - - - - - Dimension - Dimensi - - - - Through all - Melalui semua - - - - Size - Ukuran - - - - <b>Drill point</b> - <b> Titik bor </ b> - - - - <b>Misc</b> - <b>Misc</ b> - - - - <b>Hole cut</b> - <b>Lubang dipotong</b> - - - - <b>Threading and size</b> - <b>Threading dan ukuran</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index ef7570467d..6e8405762c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 75e7e52820..094be78291 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Ruota dentata ad evolvente... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Pignone... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitive geometriche - - - - Width: - Larghezza: - Length: Lunghezza: + + + + Width: + Larghezza: + @@ -1005,12 +1087,6 @@ Height: Altezza: - - - - Angle: - Angolo: - @@ -1063,6 +1139,12 @@ Radius 2: Raggio 2: + + + + Angle: + Angolo: + @@ -1232,16 +1314,16 @@ Se zero, è uguale a Raggio2 Z: Z: - - - End point - Punto finale - Start point Punto iniziale + + + End point + Punto finale + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ fare nuovamente clic per terminare la selezione Add Aggiungi + + + Remove + Rimuovi + - select an item to highlight it @@ -1435,11 +1522,6 @@ fare nuovamente clic per terminare la selezione Angle Angolo - - - Remove - Rimuovi - @@ -1714,6 +1796,11 @@ fare nuovamente clic per terminare la selezione Add Aggiungi + + + Remove + Rimuovi + - select an item to highlight it @@ -1726,11 +1813,6 @@ fare nuovamente clic per terminare la selezione Radius: Raggio: - - - Remove - Rimuovi - @@ -1884,16 +1966,6 @@ fare nuovamente clic per terminare la selezione PartDesignGui::TaskHoleParameters - - - Hole parameters - Parametri del foro - - - - None - Nessuno - Counterbore @@ -1919,6 +1991,16 @@ fare nuovamente clic per terminare la selezione Cap screw (deprecated) Vite a testa cilindrica (deprecato) + + + Hole parameters + Parametri del foro + + + + None + Nessuno + ISO metric regular profile @@ -3176,12 +3258,12 @@ fare nuovamente clic per terminare la selezione The moved feature appears after the currently set tip. - The moved feature appears after the currently set tip. + La funzione spostata appare dopo il suggerimento attualmente impostato. Do you want the last feature to be the new tip? - Do you want the last feature to be the new tip? + Vuoi che l'ultima funzione sia il nuovo suggerimento? @@ -3284,6 +3366,11 @@ fare nuovamente clic per terminare la selezione Cannot use this command as there is no solid to subtract from. Impossibile usare questo comando perché non c'è un solido da cui sottrarre. + + + Ensure that the body contains a feature before attempting a subtractive command. + Assicurati che il corpo contenga una forma prima di tentare un comando sottrattivo. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ fare nuovamente clic per terminare la selezione Select an edge, face, or body from a single body. Selezionare uno spigolo, una faccia o un corpo da un unico corpo. - - - Select an edge, face, or body from an active body. - Selezionare uno spigolo, una faccia o un corpo da un corpo attivo. - - - - Please create a feature first. - Si prega di creare prima una funzione. - - - - Please select only one feature in an active body. - Si prega di selezionare solo una funzione in un corpo attivo. - @@ -3344,9 +3416,9 @@ fare nuovamente clic per terminare la selezione La selezione non è nel Corpo attivo - - Ensure that the body contains a feature before attempting a subtractive command. - Assicurati che il corpo contenga una forma prima di tentare un comando sottrattivo. + + Select an edge, face, or body from an active body. + Selezionare uno spigolo, una faccia o un corpo da un corpo attivo. @@ -3373,6 +3445,16 @@ fare nuovamente clic per terminare la selezione No valid features in this document Questo documento non contiene nessuna funzione valida + + + Please create a feature first. + Si prega di creare prima una funzione. + + + + Please select only one feature in an active body. + Si prega di selezionare solo una funzione in un corpo attivo. + Part creation failed @@ -4101,11 +4183,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parametri di foratura + + + <b>Threading and size</b> + <b>Filettatura e dimensioni</b> + + + + Profile + Profilo + Whether the hole gets a thread Se il foro ottiene una filettatura + + + Threaded + Filettato + Whether the hole gets a modelled thread @@ -4149,6 +4246,26 @@ Nota che il calcolo può richiedere un po' di tempo Custom Thread clearance value Valore di distanza del filetto personalizzata + + + Direction + Direzione + + + + Right hand + Destrorsa + + + + Left hand + Sinistrorsa + + + + Size + Dimensione + Hole clearance @@ -4175,16 +4292,44 @@ Disponibile solo per fori senza filetto Wide Larghezza + + + Class + Classe + Tolerance class for threaded holes according to hole profile Classe di tolleranza per i fori filettati in base al profilo del foro + + + + Diameter + Diametro + Hole diameter Diametro foro + + + + Depth + Profondità + + + + + Dimension + Dimensione + + + + Through all + Attraverso tutto + Thread Depth @@ -4200,12 +4345,74 @@ Disponibile solo per fori senza filetto Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Forma del foro</b> + Type Tipo + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Angolo di svasatura + + + + <b>Drill point</b> + <b>Forma della punta</b> + + + + Flat + Piatto + + + + Angled + Angolato + + + + The size of the drill point will be taken into +account for the depth of blind holes + La dimensione della punta del trapano sarà presa in considerazione +per la profondità dei fori ciechi + + + + Take into account for depth + Prendi in considerazione per la profondità + + + + <b>Misc</b> + <b>Varie</b> + + + + Tapered + Rastremato + Taper angle for the hole @@ -4227,131 +4434,6 @@ over 90: larger hole radius at the bottom Reversed Invertita - - - - Diameter - Diametro - - - - - Depth - Profondità - - - - Class - Classe - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - La dimensione della punta del trapano sarà presa in considerazione -per la profondità dei fori ciechi - - - - Take into account for depth - Prendi in considerazione per la profondità - - - - Tapered - Rastremato - - - - Direction - Direzione - - - - Flat - Piatto - - - - Angled - Angolato - - - - Right hand - Destrorsa - - - - Left hand - Sinistrorsa - - - - Threaded - Filettato - - - - Profile - Profilo - - - - Countersink angle - Angolo di svasatura - - - - - Dimension - Dimensione - - - - Through all - Attraverso tutto - - - - Size - Dimensione - - - - <b>Drill point</b> - <b>Forma della punta</b> - - - - <b>Misc</b> - <b>Varie</b> - - - - <b>Hole cut</b> - <b>Forma del foro</b> - - - - <b>Threading and size</b> - <b>Filettatura e dimensioni</b> - Normal @@ -4378,16 +4460,16 @@ per la profondità dei fori ciechi Workbench - - - &Part Design - &Part Design - &Sketch &Schizzo + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm index 019203c84c..59e53e2b94 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index e56c0ab385..802316e127 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -16,7 +98,7 @@ Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + 選択したスケッチをらせん状にスイープ @@ -821,7 +903,7 @@ Make LinearPattern - Make LinearPattern + 直線状パターンを作成 @@ -905,7 +987,7 @@ Module: - Module: + モジュール: @@ -984,18 +1066,18 @@ Geometric Primitives 幾何プリミティブ - - - - Width: - 幅： - Length: 長さ: + + + + Width: + 幅： + @@ -1005,12 +1087,6 @@ Height: 高さ: - - - - Angle: - 角度: - @@ -1063,6 +1139,12 @@ Radius 2: 半径 2: + + + + Angle: + 角度: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - 終点 - Start point 始点 + + + End point + 終点 + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add 追加 + + + Remove + 削除 + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle 角度 - - - Remove - 削除 - @@ -1714,6 +1796,11 @@ click again to end selection Add 追加 + + + Remove + 削除 + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: 半径: - - - Remove - 削除 - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - ホールパラメーター - - - - None - なし - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + ホールパラメーター + + + + None + なし + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + 減算コマンドを実行する前に、ボディにフィーチャーが含まれていることを確認します。 + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection 選択されているのはアクティブなボディーではありません。 - - Ensure that the body contains a feature before attempting a subtractive command. - 減算コマンドを実行する前に、ボディにフィーチャーが含まれていることを確認します。 + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document このドキュメントには有効な形状がありません + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4104,11 +4186,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters タスクホールパラメーター + + + <b>Threading and size</b> + <b>ねじ切りとサイズ</b> + + + + Profile + プロファイル + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + ねじ + Whether the hole gets a modelled thread @@ -4152,6 +4249,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + 方向 + + + + Right hand + 右手 + + + + Left hand + 左手 + + + + Size + サイズ + Hole clearance @@ -4178,16 +4295,44 @@ Only available for holes without thread Wide Wide + + + Class + クラス + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + 直径 + Hole diameter Hole diameter + + + + Depth + 深さ + + + + + Dimension + 寸法 + + + + Through all + 貫通 + Thread Depth @@ -4203,12 +4348,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>ホールカット</b> + Type タイプ + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + 皿穴の角度 + + + + <b>Drill point</b> + <b>ドリルポイント</b> + + + + Flat + フラット + + + + Angled + 角度 + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>その他</b> + + + + Tapered + テーパー + Taper angle for the hole @@ -4230,131 +4437,6 @@ over 90: larger hole radius at the bottom Reversed 逆方向 - - - - Diameter - 直径 - - - - - Depth - 深さ - - - - Class - クラス - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - テーパー - - - - Direction - 方向 - - - - Flat - フラット - - - - Angled - 角度 - - - - Right hand - 右手 - - - - Left hand - 左手 - - - - Threaded - ねじ - - - - Profile - プロファイル - - - - Countersink angle - 皿穴の角度 - - - - - Dimension - 寸法 - - - - Through all - 貫通 - - - - Size - サイズ - - - - <b>Drill point</b> - <b>ドリルポイント</b> - - - - <b>Misc</b> - <b>その他</b> - - - - <b>Hole cut</b> - <b>ホールカット</b> - - - - <b>Threading and size</b> - <b>ねじ切りとサイズ</b> - Normal @@ -4381,16 +4463,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm index d26f7b3c13..c275e3f666 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.ts index 8f8b0534a6..039f53ea29 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_kab.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitives géométriques - - - - Width: - Largeur : - Length: Longueur : + + + + Width: + Largeur : + @@ -1005,12 +1087,6 @@ Height: Hauteur : - - - - Angle: - Angle : - @@ -1063,6 +1139,12 @@ Radius 2: Rayon 2 : + + + + Angle: + Angle : + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z : - - - End point - Point final - Start point Point de départ + + + End point + Point final + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Add + + + Remove + Enlever + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Tiɣmeṛt - - - Remove - Enlever - @@ -1714,6 +1796,11 @@ click again to end selection Add Add + + + Remove + Enlever + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Rayon : - - - Remove - Enlever - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hole parameters - - - - None - Ula yiwen - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hole parameters + + + + None + Ula yiwen + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selection is not in Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Aucune fonction valide dans ce document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Direction + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + Taille + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + Dimension + + + + Through all + À travers tout + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Anaw + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Inversé - - - - Diameter - Diameter - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Direction - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - Profil - - - - Countersink angle - Countersink angle - - - - - Dimension - Dimension - - - - Through all - À travers tout - - - - Size - Taille - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm index 2de8b40c15..8de573d479 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts index cba7192d54..8ac23af6b9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -11,12 +93,12 @@ Additive helix - Additive helix + 나선 Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + 선택한 스케치를 나선을 따라 스윕 @@ -29,12 +111,12 @@ Additive loft - Additive loft + 로프트 Loft a selected profile through other profile sections - Loft a selected profile through other profile sections + 선택한 프로파일을 다른 프로파일 섹션으로 로프트 @@ -47,12 +129,12 @@ Additive pipe - Additive pipe + 파이프 Sweep a selected sketch along a path or to other profiles - Sweep a selected sketch along a path or to other profiles + 선택된 스케치를 경로 또는 다른 프로파일을 따라 스윕 @@ -65,12 +147,12 @@ Create body - 생성: 바디(Body) + 바디 생성 Create a new body and make it active - 새로운 바디(Body)를 생성하고 작업 바디로 전환합니다. + 새로운 바디 및 활성화 @@ -88,7 +170,7 @@ Boolean operation with two or more bodies - 두 개 이상 바디(Body)의 불리언(Boolean) 작업을 수행합니다. + 두 개 이상 바디의 불리언 작업 @@ -101,12 +183,12 @@ Create a local coordinate system - 국부 좌표계 생성 + 지역 좌표계 생성 Create a new local coordinate system - 새 국부 좌표계 생성 + 새 지역 좌표계 생성 @@ -119,12 +201,12 @@ Chamfer - 생성: 모따기(Chamfer) + 모따기 Chamfer the selected edges of a shape - 선택 된 모서리를 떼어냅니다. + 선택된 모서리에 챔퍼 @@ -137,12 +219,12 @@ Create a clone - 복제하기 + 복제 Create a new clone - Create a new clone + 새로운 복제 생성 @@ -160,7 +242,7 @@ Make a draft on a face - 선택된 면을 지정한 각도로 모델 면에 구배를 줍니다. + 면에 구배 생성 @@ -178,7 +260,7 @@ Duplicates the selected object and adds it to the active body - 선택한 객체 복사하고 작업 바디에 추가합니다. + 선택한 객체 복사 및 활성화된 바디에 추가 @@ -191,12 +273,12 @@ Fillet - 생성: 필렛(Fillet) + 필렛 Make a fillet on an edge, face or body - 모서리를 따라 바깥쪽 면에 둥근 필렛을 작성합니다. + 모서리, 면, 바디에 필렛 생성 @@ -209,12 +291,12 @@ Groove - 생성: 회전 컷(Groove) + 그루브 Groove a selected sketch - 스케치된 프로파일을 축을 중심으로 회전하여 솔리드 모델을 잘라냅니다. + 선택된 스케치를 사용하여 그루브 @@ -232,7 +314,7 @@ Create a hole with the selected sketch - 선택한 스케치에 구멍 생성 + 선택한 스케치를 사용하여 구멍 생성 @@ -245,12 +327,12 @@ Create a datum line - Create a datum line + 데이텀 선 생성 Create a new datum line - Create a new datum line + 새로운 데이텀 선 생성 @@ -263,12 +345,12 @@ LinearPattern - 생성: 선형 패턴(Linear pattern) + 선형 패턴 Create a linear pattern feature - 선택 피쳐를 이용하여 선형 패턴을 생성합니다. + 선형 패턴 형상을 생성 @@ -286,7 +368,7 @@ Migrate document to the modern PartDesign workflow - Migrate document to the modern PartDesign workflow + 문서를 최신 PartDesign 워크플로로 마이그레이션 @@ -299,12 +381,12 @@ Mirrored - 대칭 복사 + 대칭 Create a mirrored feature - 대칭 복사 + 대칭 형상 생성 @@ -322,7 +404,7 @@ Moves the selected object to another body - 선택된 객체를 다른 바디로 이동합니다. + 선택된 객체를 다른 바디로 이동 @@ -340,7 +422,7 @@ Moves the selected object and insert it after another object - 선택된 객체를 다른 객체 뒤로 삽입합니다. + 선택된 객체를 다른 객체 뒤로 삽입 @@ -353,7 +435,7 @@ Set tip - Set tip + 팁 설정 @@ -371,12 +453,12 @@ Create MultiTransform - 생성: 다중 패턴(Multi transform) + 다중 패턴 생성 Create a multitransform feature - 선택 피쳐를 이용하여 다중 패턴을 생성합니다. + 다중 패턴 형상 생성 @@ -394,7 +476,7 @@ Create a new sketch - Create a new sketch + 새로운 스케치 생성 @@ -407,12 +489,12 @@ Pad - 생성: 돌출(Pad) + 돌출 Pad a selected sketch - 스케치를 한 방향 또는 두 방향으로 돌출하여 솔리드 피처를 생성합니다. + 선택된 스케치를 돌출 @@ -425,12 +507,12 @@ Create a datum plane - 생성: 데이텀 평면(Datum plane) + 데이텀 평면 생성 Create a new datum plane - 새로운 데이텀 평면을 생성합니다. + 새로운 데이텀 평면을 생성 @@ -443,12 +525,12 @@ Pocket - 생성: 돌출 컷(Pocket) + 돌출 컷 Create a pocket with the selected sketch - 스케치된 프로파일을 돌출하여 잘라진 형체를 생성합니다. + 선택된 스케치를 사용하여 돌출 컷 생성 @@ -461,12 +543,12 @@ Create a datum point - 생성: 데이텀 점(Datum point) + 데이텀 점 생성 Create a new datum point - 새로운 데이텀 점을 생성합니다. + 새로운 데이텀 점 생성 @@ -479,12 +561,12 @@ PolarPattern - 생성: 원형 패턴(Polar pattern) + 원형 패턴 Create a polar pattern feature - 선택 피쳐를 축을 중심으로 원형 패턴을 생성합니다. + 원형 패턴 형상 생성 @@ -497,12 +579,12 @@ Revolution - 생성: 회전(Revolution) + 회전 Revolve a selected sketch - 축을 중심으로 프로파일을 회전하여 솔리드 피처를 생성합니다. + 선택된 스케치를 회전 @@ -520,7 +602,7 @@ Create a scaled feature - Create a scaled feature + 축척된 피쳐 생성 @@ -533,12 +615,12 @@ Create a shape binder - Create a shape binder + 모양 바인더 만들기 Create a new shape binder - Create a new shape binder + 새 모양 바인더 만들기 @@ -552,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + 하위 개체 모양 바인더 만들기 @@ -565,12 +647,12 @@ Subtractive helix - Subtractive helix + 빼기 나선 Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + 나선을 따라 선택한 스케치를 스윕하고 본체에서 제거 @@ -588,7 +670,7 @@ Loft a selected profile through other profile sections and remove it from the body - Loft a selected profile through other profile sections and remove it from the body + 다른 프로파일 섹션을 통해 선택한 프로파일을 로프트하고 본체에서 제거 @@ -606,7 +688,7 @@ Sweep a selected sketch along a path or to other profiles and remove it from the body - Sweep a selected sketch along a path or to other profiles and remove it from the body + 경로를 따라 또는 다른 프로파일로 선택한 스케치를 스윕하고 본체에서 제거 @@ -643,12 +725,12 @@ Additive Box - Additive Box + 첨가 상자 Additive Cylinder - Additive Cylinder + 첨가 실린더 @@ -697,27 +779,27 @@ Subtractive Box - Subtractive Box + 빼기 상자 Subtractive Cylinder - Subtractive Cylinder + 빼기 실린더 Subtractive Sphere - Subtractive Sphere + 빼기 원 Subtractive Cone - Subtractive Cone + 빼기 원뿔 Subtractive Ellipsoid - Subtractive Ellipsoid + 빼기 타원체 @@ -727,12 +809,12 @@ Subtractive Prism - Subtractive Prism + 감산 프리즘 Subtractive Wedge - Subtractive Wedge + 빼기 쐐기 @@ -740,93 +822,93 @@ Edit ShapeBinder - Edit ShapeBinder + ShapeBinder 편집 Create ShapeBinder - Create ShapeBinder + ShapeBinder 만들기 Create SubShapeBinder - Create SubShapeBinder + SubShapeBinder 만들기 Create Clone - Create Clone + Clone 생성 Make copy - Make copy + 사본 만들기 Create a Sketch on Face - Create a Sketch on Face + 면에 스케치 만들기 Create a new Sketch - Create a new Sketch + 새 스케치 만들기 Convert to MultiTransform feature - Convert to MultiTransform feature + MultiTransform 기능으로 변환 Create Boolean - Create Boolean + 부울 생성 Add a Body - Add a Body + 바디 추가 Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + 기존 부품 설계 기능을 본체로 마이그레이션 Move tip to selected feature - Move tip to selected feature + 선택한 기능으로 탭 이동 Duplicate a PartDesign object - Duplicate a PartDesign object + PartDesign 개체 복제 Move an object - Move an object + 개체 이동 Move an object inside tree - Move an object inside tree + 트리 내부에서 개체 이동 Mirrored - 대칭 복사 + 대칭 Make LinearPattern - Make LinearPattern + 선형 패턴 만들기 PolarPattern - 생성: 원형 패턴(Polar pattern) + 원형 패턴 @@ -943,10 +1025,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + 요청한 기능을 생성할 수 없습니다. 그 이유는 다음과 같습니다. + - 활성 바디에는 기본 모양이 포함되어 있지 않으므로 + 제거할 재료; + - 선택한 스케치는 활성 바디에 속하지 않습니다. @@ -957,10 +1039,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + 요청한 기능을 생성할 수 없습니다. 그 이유는 다음과 같습니다. + - 활성 바디에는 기본 모양이 포함되어 있지 않으므로 + 제거할 재료; + - 선택한 스케치는 활성 바디에 속하지 않습니다. @@ -971,10 +1053,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + 요청한 기능을 생성할 수 없습니다. 그 이유는 다음과 같습니다. + - 활성 바디에는 기본 모양이 포함되어 있지 않으므로 + 제거할 재료; + - 선택한 스케치는 활성 바디에 속하지 않습니다. @@ -984,18 +1066,18 @@ Geometric Primitives 기하학적 프리미티브 - - - - Width: - 너비: - Length: 길이: + + + + Width: + 너비: + @@ -1005,12 +1087,6 @@ Height: 높이: - - - - Angle: - 각도: - @@ -1024,25 +1100,25 @@ Angle in first direction: - Angle in first direction: + 첫 번째 방향의 각도: Angle in first direction - Angle in first direction + 첫 번째 방향의 각도 Angle in second direction: - Angle in second direction: + 두 번째 방향의 각도: Angle in second direction - Angle in second direction + 두 번째 방향의 각도 @@ -1063,6 +1139,12 @@ Radius 2: 반경 2: + + + + Angle: + 각도: + @@ -1077,12 +1159,12 @@ Radius in local z-direction - Radius in local z-direction + 로컬 z 방향의 반경 Radius in local x-direction - Radius in local x-direction + 로컬 x 방향의 반경 @@ -1093,8 +1175,8 @@ Radius in local y-direction If zero, it is equal to Radius2 - Radius in local y-direction -If zero, it is equal to Radius2 + 로컬 y 방향의 반경 +0이면 Radius2와 같습니다. @@ -1105,12 +1187,12 @@ If zero, it is equal to Radius2 Radius in local xy-plane - Radius in local xy-plane + 로컬 xy 평면의 반경 Radius in local xz-plane - Radius in local xz-plane + 로컬 xz 평면의 반경 @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - 끝점 - Start point 시작 점 + + + End point + 끝점 + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add 추가 + + + Remove + 제거 + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle 각 - - - Remove - 제거 - @@ -1714,6 +1796,11 @@ click again to end selection Add 추가 + + + Remove + 제거 + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: 반경: - - - Remove - 제거 - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - 구멍 매개 변수 - - - - None - 없음 - Counterbore @@ -1907,7 +1979,7 @@ click again to end selection Cheesehead (deprecated) - Cheesehead (deprecated) + 치즈헤드(더 이상 사용되지 않음) @@ -1919,15 +1991,25 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + 구멍 매개 변수 + + + + None + 없음 + ISO metric regular profile - ISO metric regular profile + ISO 메트릭 일반 프로필 ISO metric fine profile - ISO metric fine profile + ISO 미터법 미세 프로파일 @@ -1965,7 +2047,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + 드래그하여 목록을 재정렬할 수 있습니다. @@ -2048,7 +2130,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + 드래그하여 목록을 재정렬할 수 있습니다. @@ -2086,7 +2168,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + 드래그하여 목록을 재정렬할 수 있습니다. @@ -2134,7 +2216,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + 드래그하여 목록을 재정렬할 수 있습니다. @@ -2681,7 +2763,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + 드래그하여 목록을 재정렬할 수 있습니다. @@ -3062,17 +3144,17 @@ click again to end selection Create an additive box by its width, height, and length - Create an additive box by its width, height, and length + 너비, 높이 및 길이로 추가 상자 만들기 Create an additive cylinder by its radius, height, and angle - Create an additive cylinder by its radius, height, and angle + 반지름, 높이 및 각도로 추가 원통 만들기 Create an additive sphere by its radius and various angles - Create an additive sphere by its radius and various angles + 반경과 다양한 각도로 추가 구 만들기 @@ -3105,42 +3187,42 @@ click again to end selection Create a subtractive box by its width, height and length - Create a subtractive box by its width, height and length + 너비, 높이 및 길이로 빼기 상자 만들기 Create a subtractive cylinder by its radius, height and angle - Create a subtractive cylinder by its radius, height and angle + 반지름, 높이 및 각도로 빼기 원통 만들기 Create a subtractive sphere by its radius and various angles - Create a subtractive sphere by its radius and various angles + 반지름과 다양한 각도로 빼기 구 만들기 Create a subtractive cone - Create a subtractive cone + 빼기 원뿔 만들기 Create a subtractive ellipsoid - Create a subtractive ellipsoid + 빼기 타원체 만들기 Create a subtractive torus - Create a subtractive torus + 빼기 torus 만들기 Create a subtractive prism - Create a subtractive prism + 감산 프리즘 만들기 Create a subtractive wedge - Create a subtractive wedge + 빼기 쐐기 만들기 @@ -3171,12 +3253,12 @@ click again to end selection Move tip - Move tip + 팁 이동 The moved feature appears after the currently set tip. - The moved feature appears after the currently set tip. + 이동된 피처는 현재 설정된 팁 뒤에 나타납니다. @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection 작업 바디(Body)에 선택된 것이 없습니다. - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document 이 문서에는 유효한 피처가 없습니다. + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -3389,60 +3471,60 @@ click again to end selection Bad base feature - Bad base feature + 잘못된 기본 기능 Body can't be based on a PartDesign feature. - Body can't be based on a PartDesign feature. + 본문은 PartDesign 기능을 기반으로 할 수 없습니다. %1 already belongs to a body, can't use it as base feature for another body. - %1 already belongs to a body, can't use it as base feature for another body. + %1은(는) 이미 본문에 속해 있으므로 다른 본문의 기본 기능으로 사용할 수 없습니다. Base feature (%1) belongs to other part. - Base feature (%1) belongs to other part. + 베이스 피처(%1) 는 다른 부품에 속합니다. The selected shape consists of multiple solids. This may lead to unexpected results. - The selected shape consists of multiple solids. -This may lead to unexpected results. + 선택한 모양은 여러 솔리드로 구성됩니다. +이로 인해 예기치 않은 결과가 발생할 수 있습니다. The selected shape consists of multiple shells. This may lead to unexpected results. - The selected shape consists of multiple shells. -This may lead to unexpected results. + 선택한 모양은 여러 셸로 구성됩니다. +이로 인해 예기치 않은 결과가 발생할 수 있습니다. The selected shape consists of only a shell. This may lead to unexpected results. - The selected shape consists of only a shell. -This may lead to unexpected results. + 선택한 모양은 쉘로만 구성됩니다. +이로 인해 예기치 않은 결과가 발생할 수 있습니다. The selected shape consists of multiple solids or shells. This may lead to unexpected results. - The selected shape consists of multiple solids or shells. -This may lead to unexpected results. + 선택한 쉐이프는 여러 솔리드 또는 쉘로 구성됩니다. +이로 인해 예기치 않은 결과가 발생할 수 있습니다. Base feature - Base feature + 기본 기능 Body may be based on no more than one feature. - Body may be based on no more than one feature. + 본문은 하나 이상의 기능을 기반으로 할 수 없습니다. @@ -3452,17 +3534,17 @@ This may lead to unexpected results. No PartDesign features found that don't belong to a body. Nothing to migrate. - No PartDesign features found that don't belong to a body. Nothing to migrate. + 본문에 속하지 않는 PartDesign 기능을 찾을 수 없습니다. 마이그레이션할 항목이 없습니다. Sketch plane cannot be migrated - Sketch plane cannot be migrated + 스케치 평면은 마이그레이션할 수 없습니다. Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. - Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. + 베이스 또는 데이텀 평면을 스케치 평면으로 사용하도록 '%1'을(를) 편집하고 재정의하십시오. @@ -3486,7 +3568,7 @@ This may lead to unexpected results. Only a solid feature can be the tip of a body. - Only a solid feature can be the tip of a body. + 솔리드 피처만 바디의 끝이 될 수 있습니다. @@ -3503,7 +3585,7 @@ This may lead to unexpected results. Only features of a single source Body can be moved - Only features of a single source Body can be moved + 단일 소스 Body의 기능만 이동할 수 있습니다. @@ -3528,14 +3610,14 @@ This may lead to unexpected results. Dependency violation - Dependency violation + 종속성 위반 Early feature must not depend on later feature. - Early feature must not depend on later feature. + 초기 기능은 이후 기능에 의존하지 않아야 합니다. @@ -3584,9 +3666,9 @@ This may lead to unexpected results. In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. + PartDesign을 사용하려면 문서에 활성 Body 개체가 필요합니다. 하나를 활성화(더블 클릭) 하거나 하나 만드십시오. -If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. +Body가 없는 PartDesign 개체가 있는 레거시 문서가 있는 경우 PartDesign의 마이그레이션 기능을 사용하여 Body에 넣습니다. @@ -3671,8 +3753,8 @@ If you have a legacy document with PartDesign objects without Body, use the migr %1 misses a base feature. This feature is broken and can't be edited. - %1 misses a base feature. -This feature is broken and can't be edited. + %1에 기본 기능이 없습니다. +이 기능은 손상되어 수정할 수 없습니다. @@ -3682,7 +3764,7 @@ This feature is broken and can't be edited. Edit hole - Edit hole + 구멍 편집 @@ -3707,7 +3789,7 @@ This feature is broken and can't be edited. Edit primitive - Edit primitive + 기본 편집 @@ -3722,12 +3804,12 @@ This feature is broken and can't be edited. Synchronize - Synchronize + 동기화 Select bound object - Select bound object + 바인딩된 개체 선택 @@ -3769,9 +3851,9 @@ This feature is broken and can't be edited. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design -> Migrate'. + 참고: 마이그레이션을 선택하면 이전 FreeCAD 버전으로 파일을 편집할 수 없습니다. +마이그레이션을 거부하면 본체 및 부품과 같은 새로운 PartDesign 기능을 사용할 수 없습니다. 결과적으로 어셈블리 작업대에서 부품을 사용할 수도 없습니다. +'부품 설계 -> 마이그레이션'을 사용하여 나중에 언제든지 마이그레이션할 수 있지만. @@ -3781,7 +3863,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit helix - Edit helix + 나선 편집 @@ -3799,7 +3881,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Reference - Sprocket Reference + 스프로킷 참조 @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + 프로필 + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + 나사산 + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + 방향 + + + + Right hand + 오른손 + + + + Left hand + 왼손 + + + + Size + 크기 + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + 직경 + Hole diameter Hole diameter + + + + Depth + 깊이 + + + + + Dimension + Dimension + + + + Through all + 관통 + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type 타입 + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + 카운터싱크(Countersink) 각도 + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - 직경 - - - - - Depth - 깊이 - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - 방향 - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - 오른손 - - - - Left hand - 왼손 - - - - Threaded - 나사산 - - - - Profile - 프로필 - - - - Countersink angle - 카운터싱크(Countersink) 각도 - - - - - Dimension - Dimension - - - - Through all - 관통 - - - - Size - 크기 - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm index a40e5184a7..3a98447721 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts index e75dce8c5b..d2b1a31d9f 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -119,12 +201,12 @@ Chamfer - Chamfer + Nusklembti Chamfer the selected edges of a shape - Chamfer the selected edges of a shape + Nusklembia pasirinktas geometrinio kūno kraštines @@ -191,12 +273,12 @@ Fillet - Fillet + Kraštų suapvalinimas Make a fillet on an edge, face or body - Make a fillet on an edge, face or body + Užapvalinti kraštinės, sienos ar erdvinio kūno kraštus @@ -299,7 +381,7 @@ Mirrored - Mirrored + Veidrodinė kopija padaryta @@ -816,7 +898,7 @@ Mirrored - Mirrored + Veidrodinė kopija padaryta @@ -984,18 +1066,18 @@ Geometric Primitives Geometriniai kūnai - - - - Width: - Plotis: - Length: Length: + + + + Width: + Plotis: + @@ -1005,12 +1087,6 @@ Height: Aukštis: - - - - Angle: - Posūkio kampas: - @@ -1018,7 +1094,7 @@ Radius: - Radius: + Spindulys: @@ -1063,6 +1139,12 @@ Radius 2: Spindulys 2: + + + + Angle: + Posūkio kampas: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - End point - Start point Start point + + + End point + End point + PartDesignGui::DlgReference @@ -1380,20 +1462,25 @@ If zero, it is equal to Radius2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Paspauskite mygtuką, jei norite pradėti atranką, +spustelėkite vėl, jei norite baigti atranką Add Pridėti + + + Remove + Pašalinti + - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - pasirinkite narį, kurį norite paryškinti +- norint pamatyti nuosklembas, dukart spustelėkite narį @@ -1403,22 +1490,22 @@ click again to end selection Equal distance - Equal distance + Vienodas plotis Two distances - Two distances + Du pločiai Distance and angle - Distance and angle + Plotis ir kampas Flip direction - Flip direction + Apgręžti kryptį @@ -1428,25 +1515,20 @@ click again to end selection Size 2 - Size 2 + Kitas dydis Angle Kampas - - - Remove - Pašalinti - There must be at least one item - There must be at least one item + Būtinas bent vienas narys @@ -1456,7 +1538,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + Būtina turėti bent vieną narį. @@ -1527,8 +1609,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Paspauskite mygtuką, jei norite pradėti atranką, +spustelėkite vėl, jei norite baigti atranką @@ -1573,7 +1655,7 @@ click again to end selection There must be at least one item - There must be at least one item + Būtinas bent vienas narys @@ -1583,7 +1665,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + Būtina turėti bent vieną narį. @@ -1597,7 +1679,7 @@ click again to end selection There must be at least one item - There must be at least one item + Būtinas bent vienas narys @@ -1706,30 +1788,30 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Paspauskite mygtuką, jei norite pradėti atranką, +spustelėkite vėl, jei norite baigti atranką Add Pridėti + + + Remove + Pašalinti + - select an item to highlight it - double-click on an item to see the fillets - - select an item to highlight it -- double-click on an item to see the fillets + - pasirinkite narį, kurį norite paryškinti +- norint pamatyti suapvalinimus, dukart spustelėkite narį Radius: - Radius: - - - - Remove - Pašalinti + Spindulys: @@ -1737,17 +1819,17 @@ click again to end selection There must be at least one item - There must be at least one item + Būtinas bent vienas narys Selection error - Selection error + Atrankos klaida At least one item must be kept. - At least one item must be kept. + Būtina turėti bent vieną narį. @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hole parameters - - - - None - Joks - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hole parameters + + + + None + Joks + ISO metric regular profile @@ -2236,7 +2318,7 @@ the sketch plane's normal vector will be used x - x + x @@ -2246,7 +2328,7 @@ the sketch plane's normal vector will be used y - y + y @@ -2256,7 +2338,7 @@ the sketch plane's normal vector will be used z - z + z @@ -2896,8 +2978,8 @@ measured along the specified direction Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Paspauskite mygtuką, jei norite pradėti atranką, +spustelėkite vėl, jei norite baigti atranką @@ -2968,7 +3050,7 @@ click again to end selection There must be at least one item - There must be at least one item + Būtinas bent vienas narys @@ -2978,7 +3060,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + Būtina turėti bent vieną narį. @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Atrankoje nėra nieko iš veikiamojo daikto - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document No valid features in this document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + Profilis + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Kryptis + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + Dydis + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + Matmuo + + + + Through all + Kiaurai + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Rūšis + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Diameter - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Kryptis - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - Profilis - - - - Countersink angle - Countersink angle - - - - - Dimension - Matmuo - - - - Through all - Kiaurai - - - - Size - Dydis - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm index cca4b73c9c..fc26c3358e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 4f0e3b2332..607cd5f903 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -16,7 +98,7 @@ Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + Veeg een geselecteerde schets langs een helix @@ -552,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Maak een subobject(en) vormenbinder @@ -984,18 +1066,18 @@ Geometric Primitives Geometrische basisvormen - - - - Width: - Breedte: - Length: Lengte: + + + + Width: + Breedte: + @@ -1005,12 +1087,6 @@ Height: Hoogte: - - - - Angle: - Hoek: - @@ -1063,6 +1139,12 @@ Radius 2: Straal 2: + + + + Angle: + Hoek: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Eindpunt - Start point Beginpunt + + + End point + Eindpunt + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Toevoegen + + + Remove + Verwijderen + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Hoek - - - Remove - Verwijderen - @@ -1714,6 +1796,11 @@ click again to end selection Add Toevoegen + + + Remove + Verwijderen + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Straal: - - - Remove - Verwijderen - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Gat parameters - - - - None - Geen - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Gat parameters + + + + None + Geen + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Zorg ervoor dat het lichaam een eigenschap heeft voordat je een aftrekkend commando probeert. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selectie niet in actief lichaam - - Ensure that the body contains a feature before attempting a subtractive command. - Zorg ervoor dat het lichaam een eigenschap heeft voordat je een aftrekkend commando probeert. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Geen geldige functies in dit document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Taak gat parameters + + + <b>Threading and size</b> + <b>Draadtype en grootte</b> + + + + Profile + Profiel + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Voorzien van schroefdraad + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Richting + + + + Right hand + Rechtsdraaiend + + + + Left hand + Linkerhand + + + + Size + Grootte + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Klasse + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Diepte + + + + + Dimension + Afmeting + + + + Through all + Langs alle + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Gat maken</b> + Type Type + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Verzink hoek + + + + <b>Drill point</b> + <b>Boor punt</b> + + + + Flat + Plat + + + + Angled + Schuin + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Overig</b> + + + + Tapered + Taps toelopend + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Omgekeerd - - - - Diameter - Diameter - - - - - Depth - Diepte - - - - Class - Klasse - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Taps toelopend - - - - Direction - Richting - - - - Flat - Plat - - - - Angled - Schuin - - - - Right hand - Rechtsdraaiend - - - - Left hand - Linkerhand - - - - Threaded - Voorzien van schroefdraad - - - - Profile - Profiel - - - - Countersink angle - Verzink hoek - - - - - Dimension - Afmeting - - - - Through all - Langs alle - - - - Size - Grootte - - - - <b>Drill point</b> - <b>Boor punt</b> - - - - <b>Misc</b> - <b>Overig</b> - - - - <b>Hole cut</b> - <b>Gat maken</b> - - - - <b>Threading and size</b> - <b>Draadtype en grootte</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm index 19d77650c3..79481cbf93 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts index 7cfa8ed22d..f3d589069c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometriske primitiver - - - - Width: - Bredde: - Length: Lengde: + + + + Width: + Bredde: + @@ -1005,12 +1087,6 @@ Height: Høyde: - - - - Angle: - Vinkel: - @@ -1063,6 +1139,12 @@ Radius 2: Radius 2: + + + + Angle: + Vinkel: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Sluttpunkt - Start point Startpunkt + + + End point + Sluttpunkt + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Legg til + + + Remove + Fjern + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Vinkel - - - Remove - Fjern - @@ -1714,6 +1796,11 @@ click again to end selection Add Legg til + + + Remove + Fjern + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Radius: - - - Remove - Fjern - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hullparametre - - - - None - Ingen - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hullparametre + + + + None + Ingen + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Valget er ikke i den aktive kroppen - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Ingen gyldige detaljer i dette dokumentet + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4107,11 +4189,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4155,6 +4252,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Retning + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + Size + Hole clearance @@ -4181,16 +4298,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + Dimensjon + + + + Through all + Gjennom alle + Thread Depth @@ -4206,12 +4351,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Type + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4233,131 +4440,6 @@ over 90: larger hole radius at the bottom Reversed Reversert - - - - Diameter - Diameter - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Retning - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - Profil - - - - Countersink angle - Countersink angle - - - - - Dimension - Dimensjon - - - - Through all - Gjennom alle - - - - Size - Size - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4384,16 +4466,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm index 31fdfa0072..d72167e7b1 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index 2602a45015..568e797e87 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Przekładnia ewolwentowa ... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Koło łańcuchowe ... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -839,7 +921,7 @@ Valid - Aktualny + Poprawny @@ -984,18 +1066,18 @@ Geometric Primitives Pierwotne bryły geometryczne - - - - Width: - Szerokość: - Length: Długość: + + + + Width: + Szerokość: + @@ -1005,12 +1087,6 @@ Height: Wysokość: - - - - Angle: - Kąt: - @@ -1063,6 +1139,12 @@ Radius 2: Promień 2: + + + + Angle: + Kąt: + @@ -1232,16 +1314,16 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Z: Z: - - - End point - Punkt końcowy - Start point Punkt początkowy + + + End point + Punkt końcowy + PartDesignGui::DlgReference @@ -1268,7 +1350,7 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Create cross-reference - Utwórz odnośnik + Utwórz dowiązanie @@ -1304,7 +1386,7 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Cut - Wytnij + Przetnij @@ -1314,7 +1396,7 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Boolean parameters - Parametry wartości logicznej + Parametry operacji logicznej @@ -1388,6 +1470,11 @@ kliknij ponownie, aby zakończyć wybór Add Dodaj + + + Remove + Skasuj + - select an item to highlight it @@ -1435,11 +1522,6 @@ kliknij ponownie, aby zakończyć wybór Angle Kąt - - - Remove - Skasuj - @@ -1640,12 +1722,12 @@ kliknij ponownie, aby zakończyć wybór Create cross-reference - Utwórz odnośnik + Utwórz dowiązanie Valid - Aktualny + Poprawny @@ -1714,6 +1796,11 @@ kliknij ponownie, aby zakończyć wybór Add Dodaj + + + Remove + Skasuj + - select an item to highlight it @@ -1726,11 +1813,6 @@ kliknij ponownie, aby zakończyć wybór Radius: Promień: - - - Remove - Skasuj - @@ -1765,7 +1847,7 @@ kliknij ponownie, aby zakończyć wybór Valid - Aktualny + Poprawny @@ -1793,12 +1875,12 @@ kliknij ponownie, aby zakończyć wybór Horizontal sketch axis - Szkic poziomej osi + Pozioma oś szkicu Vertical sketch axis - Szkic pionowej osi + Pionowa oś szkicu @@ -1884,16 +1966,6 @@ kliknij ponownie, aby zakończyć wybór PartDesignGui::TaskHoleParameters - - - Hole parameters - Parametry otworu - - - - None - Brak - Counterbore @@ -1919,6 +1991,16 @@ kliknij ponownie, aby zakończyć wybór Cap screw (deprecated) Śruba z łbem walcowym (przestarzałe) + + + Hole parameters + Parametry otworu + + + + None + Brak + ISO metric regular profile @@ -1980,7 +2062,7 @@ kliknij ponownie, aby zakończyć wybór Length - Długość + Odstęp @@ -2028,7 +2110,7 @@ kliknij ponownie, aby zakończyć wybór Profile - Profil + Kontur @@ -2219,7 +2301,7 @@ kliknij ponownie, aby zakończyć wybór Length - Długość + Odstęp @@ -2403,7 +2485,7 @@ mierzona wzdłuż podanego kierunku Profile - Profil + Kontur @@ -2461,7 +2543,7 @@ mierzona wzdłuż podanego kierunku Profile - Profil + Kontur @@ -2492,7 +2574,7 @@ mierzona wzdłuż podanego kierunku Path to sweep along - Ścieżka do wyciagnięcia + Ścieżka do wyciągnięcia @@ -2507,7 +2589,7 @@ mierzona wzdłuż podanego kierunku Pipe parameters - Parametry rury + Parametry wyciągnięcia @@ -2536,7 +2618,7 @@ mierzona wzdłuż podanego kierunku Transform mode - Tryb transormacji + Tryb transformacji @@ -2591,7 +2673,7 @@ mierzona wzdłuż podanego kierunku Length - Długość + Odstęp @@ -2765,12 +2847,12 @@ mierzona wzdłuż podanego kierunku Horizontal sketch axis - Szkic poziomej osi + Pozioma oś szkicu Vertical sketch axis - Szkic pionowej osi + Pionowa oś szkicu @@ -2999,12 +3081,12 @@ kliknij ponownie, aby zakończyć wybór Vertical sketch axis - Szkic pionowej osi + Pionowa oś szkicu Horizontal sketch axis - Szkic poziomej osi + Pozioma oś szkicu @@ -3284,6 +3366,11 @@ kliknij ponownie, aby zakończyć wybór Cannot use this command as there is no solid to subtract from. Nie można użyć tego polecenia, ponieważ nie ma bryły do odjęcia. + + + Ensure that the body contains a feature before attempting a subtractive command. + Upewnij się, że zawartość posiada cechę, zanim spróbujesz wykonać polecenie odejmowania. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ kliknij ponownie, aby zakończyć wybór Select an edge, face, or body from a single body. Wybierz krawędź, ścianę lub zawartość z pojedynczej zawartości. - - - Select an edge, face, or body from an active body. - Wybierz krawędź, ścianę lub zawartość z aktywnej zawartości. - - - - Please create a feature first. - Proszę najpierw utworzyć cechę. - - - - Please select only one feature in an active body. - Wybierz tylko jedną cechę w aktywnej zawartości. - @@ -3344,9 +3416,9 @@ kliknij ponownie, aby zakończyć wybór Wybór nie znajduje się w aktywnej zawartości - - Ensure that the body contains a feature before attempting a subtractive command. - Upewnij się, że zawartość posiada cechę, zanim spróbujesz wykonać polecenie odejmowania. + + Select an edge, face, or body from an active body. + Wybierz krawędź, ścianę lub zawartość z aktywnej zawartości. @@ -3373,6 +3445,16 @@ kliknij ponownie, aby zakończyć wybór No valid features in this document Brak prawidłowych cech w tym dokumencie + + + Please create a feature first. + Proszę najpierw utworzyć cechę. + + + + Please select only one feature in an active body. + Wybierz tylko jedną cechę w aktywnej zawartości. + Part creation failed @@ -3399,7 +3481,7 @@ kliknij ponownie, aby zakończyć wybór %1 already belongs to a body, can't use it as base feature for another body. - %1 już należy do zawartości, nie można go użyć jak podstawową funkcję dla innej zawartości. + Obiekt %1 już należy do zawartości, nie może zostać użyty jako podstawowa cecha kolejnej zawartości. @@ -3554,14 +3636,14 @@ Może to prowadzić do nieoczekiwanych rezultatów. Vertical sketch axis - Szkic pionowej osi + Pionowa oś szkicu Horizontal sketch axis - Szkic poziomej osi + Pozioma oś szkicu @@ -3621,7 +3703,7 @@ Jeśli masz starszy dokument z obiektami Projektu części bez obiektu Zawartoś Set colors... - Ustaw kolory... + Ustaw kolory ... @@ -4108,11 +4190,26 @@ Migracja będzie możliwa w każdej chwili za pomocą "Projekt części -> Mi Task Hole Parameters Parametry otworu + + + <b>Threading and size</b> + <b>Gwintowanie i wymiar</b> + + + + Profile + Kontur + Whether the hole gets a thread Czy otwór będzie gwintowany + + + Threaded + Gwintowany + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Zauważ, że obliczenia mogą zająć trochę czasu Custom Thread clearance value Niestandardowa wartość pasowania gwintu + + + Direction + Kierunek + + + + Right hand + Prawy + + + + Left hand + Lewy + + + + Size + Rozmiar + Hole clearance @@ -4182,16 +4299,44 @@ Dostępne tylko dla otworów bez gwintu Wide Szerokość + + + Class + Klasa + Tolerance class for threaded holes according to hole profile Klasa tolerancji dla otworów gwintowanych w zależności od profilu otworu + + + + Diameter + Średnica + Hole diameter Średnica otworu + + + + Depth + Głębokość + + + + + Dimension + Wymiar + + + + Through all + Przez wszystkie + Thread Depth @@ -4207,12 +4352,74 @@ Dostępne tylko dla otworów bez gwintu Tapped (DIN76) Gwintowany (DIN76) + + + <b>Hole cut</b> + <b>Wycięcie otworu</b> + Type Typ + + + Cut type for screw heads + Typ nacięcia dla łbów śrub + + + + Check to override the values predefined by the 'Type' + Zaznacz opcję, aby nadpisać wartości predefiniowane przez "Typ" + + + + Custom values + Wartości użytkownika + + + + Countersink angle + Kąt pogłębienia stożkowego + + + + <b>Drill point</b> + <b>Czubek wiertła</b> + + + + Flat + Płaski + + + + Angled + Kątowy + + + + The size of the drill point will be taken into +account for the depth of blind holes + Wielkość wierzchołka wiertła będzie brana pod uwagę +dla głębokości otworów nieprzelotowych + + + + Take into account for depth + Uwzględnij głębokość + + + + <b>Misc</b> + <b>Różne</b> + + + + Tapered + Stożkowy + Taper angle for the hole @@ -4234,131 +4441,6 @@ powyżej 90°: większy promień otworu u dołu Reversed Odwrócony - - - - Diameter - Średnica - - - - - Depth - Głębokość - - - - Class - Klasa - - - - Cut type for screw heads - Typ nacięcia dla łbów śrub - - - - Check to override the values predefined by the 'Type' - Zaznacz opcję, aby nadpisać wartości predefiniowane przez "Typ" - - - - Custom values - Wartości użytkownika - - - - The size of the drill point will be taken into -account for the depth of blind holes - Wielkość wierzchołka wiertła będzie brana pod uwagę -dla głębokości otworów nieprzelotowych - - - - Take into account for depth - Uwzględnij głębokość - - - - Tapered - Stożkowy - - - - Direction - Kierunek - - - - Flat - Płaski - - - - Angled - Kątowy - - - - Right hand - Prawy - - - - Left hand - Lewy - - - - Threaded - Gwintowany - - - - Profile - Profil - - - - Countersink angle - Kąt pogłębienia stożkowego - - - - - Dimension - Wymiar - - - - Through all - Przez wszystkie - - - - Size - Rozmiar - - - - <b>Drill point</b> - <b>Czubek wiertła</b> - - - - <b>Misc</b> - <b>Różne</b> - - - - <b>Hole cut</b> - <b>Wycięcie otworu</b> - - - - <b>Threading and size</b> - <b>Gwintowanie i wymiar</b> - Normal @@ -4385,16 +4467,16 @@ dla głębokości otworów nieprzelotowych Workbench - - - &Part Design - &Projekt Części - &Sketch &Szkic + + + &Part Design + &Projekt Części + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm index 57d33586b8..c303ac0eb2 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index c972349c08..4c0062eb86 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -981,18 +1063,18 @@ Geometric Primitives Primitivas geométricas - - - - Width: - Largura: - Length: Comprimento: + + + + Width: + Largura: + @@ -1002,12 +1084,6 @@ Height: Altura: - - - - Angle: - Ângulo: - @@ -1060,6 +1136,12 @@ Radius 2: Raio 2: + + + + Angle: + Ângulo: + @@ -1229,16 +1311,16 @@ Se for zero, é igual ao Raio2 Z: Z: - - - End point - Ponto final - Start point Ponto inicial + + + End point + Ponto final + PartDesignGui::DlgReference @@ -1385,6 +1467,11 @@ clique novamente para terminar a seleção Add Adicionar + + + Remove + Remover + - select an item to highlight it @@ -1432,11 +1519,6 @@ clique novamente para terminar a seleção Angle Ângulo - - - Remove - Remover - @@ -1711,6 +1793,11 @@ clique novamente para terminar a seleção Add Adicionar + + + Remove + Remover + - select an item to highlight it @@ -1723,11 +1810,6 @@ clique novamente para terminar a seleção Radius: Raio: - - - Remove - Remover - @@ -1881,16 +1963,6 @@ clique novamente para terminar a seleção PartDesignGui::TaskHoleParameters - - - Hole parameters - Parâmetros de furo - - - - None - Nenhum - Counterbore @@ -1916,6 +1988,16 @@ clique novamente para terminar a seleção Cap screw (deprecated) Parafuso de tampa (depreciado) + + + Hole parameters + Parâmetros de furo + + + + None + Nenhum + ISO metric regular profile @@ -3281,6 +3363,11 @@ clique novamente para terminar a seleção Cannot use this command as there is no solid to subtract from. Não é possível usar este comando pois não há um sólido para subtrair. + + + Ensure that the body contains a feature before attempting a subtractive command. + Certifique-se de que o corpo contém um objeto antes de tentar um comando subtrativo. + Cannot use selected object. Selected object must belong to the active body @@ -3319,21 +3406,6 @@ clique novamente para terminar a seleção Select an edge, face, or body from a single body. Selecione uma aresta, face ou corpo de um único corpo. - - - Select an edge, face, or body from an active body. - Selecione uma aresta, face ou corpo de um corpo ativo. - - - - Please create a feature first. - Por favor, crie um objeto primeiro. - - - - Please select only one feature in an active body. - Por favor, selecione apenas um objeto em um corpo ativo. - @@ -3341,9 +3413,9 @@ clique novamente para terminar a seleção A seleção não está no corpo ativo - - Ensure that the body contains a feature before attempting a subtractive command. - Certifique-se de que o corpo contém um objeto antes de tentar um comando subtrativo. + + Select an edge, face, or body from an active body. + Selecione uma aresta, face ou corpo de um corpo ativo. @@ -3370,6 +3442,16 @@ clique novamente para terminar a seleção No valid features in this document Nenhum objeto válido neste documento + + + Please create a feature first. + Por favor, crie um objeto primeiro. + + + + Please select only one feature in an active body. + Por favor, selecione apenas um objeto em um corpo ativo. + Part creation failed @@ -4100,11 +4182,26 @@ Embora você possa migrar a qualquer momento mais tarde com 'Part Design -> M Task Hole Parameters Parâmetros da furação + + + <b>Threading and size</b> + <b>Roscar e dimensionar</b> + + + + Profile + Perfil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Roscado + Whether the hole gets a modelled thread @@ -4148,6 +4245,26 @@ Note that the calculation can take some time Custom Thread clearance value Valor de folga da Rosca Customizada + + + Direction + Direção + + + + Right hand + Mão direita + + + + Left hand + Mão esquerda + + + + Size + Tamanho + Hole clearance @@ -4174,16 +4291,44 @@ Only available for holes without thread Wide Largo + + + Class + Classe + Tolerance class for threaded holes according to hole profile Classe de Tolerância para furos segmentados de acordo com perfil do buraco + + + + Diameter + Diâmetro + Hole diameter Diâmetro do buraco + + + + Depth + Profundidade + + + + + Dimension + Dimensão + + + + Through all + Atravessando tudo + Thread Depth @@ -4199,12 +4344,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Tipos de rebaixamento</b> + Type Tipo + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Valores personalizados + + + + Countersink angle + Ângulo do escareamento + + + + <b>Drill point</b> + <b>Ângulo de terminaçâo</b> + + + + Flat + Plano + + + + Angled + Inclinado + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Outros</b> + + + + Tapered + Inclinado + Taper angle for the hole @@ -4226,131 +4433,6 @@ over 90: larger hole radius at the bottom Reversed Invertido - - - - Diameter - Diâmetro - - - - - Depth - Profundidade - - - - Class - Classe - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Valores personalizados - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Inclinado - - - - Direction - Direção - - - - Flat - Plano - - - - Angled - Inclinado - - - - Right hand - Mão direita - - - - Left hand - Mão esquerda - - - - Threaded - Roscado - - - - Profile - Perfil - - - - Countersink angle - Ângulo do escareamento - - - - - Dimension - Dimensão - - - - Through all - Atravessando tudo - - - - Size - Tamanho - - - - <b>Drill point</b> - <b>Ângulo de terminaçâo</b> - - - - <b>Misc</b> - <b>Outros</b> - - - - <b>Hole cut</b> - <b>Tipos de rebaixamento</b> - - - - <b>Threading and size</b> - <b>Roscar e dimensionar</b> - Normal @@ -4377,16 +4459,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Desenho + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm index befff64906..0fe64b6c05 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts index 99cb543d3b..839b5b7991 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitivas geométricas - - - - Width: - Largura: - Length: Comprimento: + + + + Width: + Largura: + @@ -1005,12 +1087,6 @@ Height: Altura: - - - - Angle: - Ângulo: - @@ -1063,6 +1139,12 @@ Radius 2: Raio 2: + + + + Angle: + Ângulo: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Ponto final - Start point Ponto Inicial + + + End point + Ponto final + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ clique novamente para terminar a seleção Add Adicionar + + + Remove + Remover + - select an item to highlight it @@ -1435,11 +1522,6 @@ clique novamente para terminar a seleção Angle Ângulo - - - Remove - Remover - @@ -1714,6 +1796,11 @@ clique novamente para terminar a seleção Add Adicionar + + + Remove + Remover + - select an item to highlight it @@ -1726,11 +1813,6 @@ clique novamente para terminar a seleção Radius: Raio: - - - Remove - Remover - @@ -1884,16 +1966,6 @@ clique novamente para terminar a seleção PartDesignGui::TaskHoleParameters - - - Hole parameters - Parâmetros do furo - - - - None - Nenhum - Counterbore @@ -1919,6 +1991,16 @@ clique novamente para terminar a seleção Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parâmetros do furo + + + + None + Nenhum + ISO metric regular profile @@ -3284,6 +3366,11 @@ clique novamente para terminar a seleção Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ clique novamente para terminar a seleção Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ clique novamente para terminar a seleção A seleção não está no corpo ativo - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ clique novamente para terminar a seleção No valid features in this document Nenhum objeto válido neste documento + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4101,11 +4183,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parâmetros da furação + + + <b>Threading and size</b> + <b>Roscar e dimensionar</b> + + + + Profile + Perfil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Roscado + Whether the hole gets a modelled thread @@ -4149,6 +4246,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Direção + + + + Right hand + Direita + + + + Left hand + Esquerda + + + + Size + Tamanho + Hole clearance @@ -4175,16 +4292,44 @@ Only available for holes without thread Wide Wide + + + Class + Classe + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diâmetro + Hole diameter Diâmetro do furo + + + + Depth + Profundidade + + + + + Dimension + Dimensão + + + + Through all + Através de todos + Thread Depth @@ -4200,12 +4345,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Tipos de rebaixamento</b> + Type Tipo + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Ângulo do escareamento + + + + <b>Drill point</b> + <b>Ângulo de terminaçâo</b> + + + + Flat + Direito + + + + Angled + Ângulo + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Outros</b> + + + + Tapered + Conicidade + Taper angle for the hole @@ -4227,131 +4434,6 @@ over 90: larger hole radius at the bottom Reversed Invertida - - - - Diameter - Diâmetro - - - - - Depth - Profundidade - - - - Class - Classe - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Conicidade - - - - Direction - Direção - - - - Flat - Direito - - - - Angled - Ângulo - - - - Right hand - Direita - - - - Left hand - Esquerda - - - - Threaded - Roscado - - - - Profile - Perfil - - - - Countersink angle - Ângulo do escareamento - - - - - Dimension - Dimensão - - - - Through all - Através de todos - - - - Size - Tamanho - - - - <b>Drill point</b> - <b>Ângulo de terminaçâo</b> - - - - <b>Misc</b> - <b>Outros</b> - - - - <b>Hole cut</b> - <b>Tipos de rebaixamento</b> - - - - <b>Threading and size</b> - <b>Roscar e dimensionar</b> - Normal @@ -4378,16 +4460,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm index 59c5febde0..b2014f8b14 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index c575c4e3e8..c38c064943 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Roată dințată evolventică... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Pinion... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -986,18 +1068,18 @@ Creati noi coordonate in sistemul local Geometric Primitives Primitive geometrice - - - - Width: - Latime: - Length: Lungime: + + + + Width: + Latime: + @@ -1007,12 +1089,6 @@ Creati noi coordonate in sistemul local Height: Inaltime: - - - - Angle: - Unghiul: - @@ -1065,6 +1141,12 @@ Creati noi coordonate in sistemul local Radius 2: Raza 2: + + + + Angle: + Unghiul: + @@ -1234,16 +1316,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Punct final - Start point Punctul de pornire + + + End point + Punct final + PartDesignGui::DlgReference @@ -1390,6 +1472,11 @@ click again to end selection Add Adaugă + + + Remove + Elimină + - select an item to highlight it @@ -1437,11 +1524,6 @@ click again to end selection Angle Unghi - - - Remove - Elimină - @@ -1716,6 +1798,11 @@ click again to end selection Add Adaugă + + + Remove + Elimină + - select an item to highlight it @@ -1728,11 +1815,6 @@ click again to end selection Radius: Raza: - - - Remove - Elimină - @@ -1886,16 +1968,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Parametrii găurii - - - - None - Niciunul - Counterbore @@ -1921,6 +1993,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parametrii găurii + + + + None + Niciunul + ISO metric regular profile @@ -3286,6 +3368,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3324,21 +3411,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3346,9 +3418,9 @@ click again to end selection Selecţia nu este în Corpul Activ - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3375,6 +3447,16 @@ click again to end selection No valid features in this document Nici o caracteristica valida in acest document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4105,11 +4187,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Paramètres du perçage + + + <b>Threading and size</b> + <b>filetare şi dimensiune</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Filetul + Whether the hole gets a modelled thread @@ -4153,6 +4250,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Direcţia + + + + Right hand + Mâna dreaptă + + + + Left hand + Mâna stângă + + + + Size + Dimensiune + Hole clearance @@ -4179,16 +4296,44 @@ Only available for holes without thread Wide Wide + + + Class + Clasă + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diametru + Hole diameter Hole diameter + + + + Depth + Adâncimea + + + + + Dimension + Dimensiune + + + + Through all + Prin toate + Thread Depth @@ -4204,12 +4349,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>gaura decupată</b> + Type Tip + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Unghi de frezare + + + + <b>Drill point</b> + <b>Punct de găurire</b> + + + + Flat + Plat + + + + Angled + In unghi + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Diferite</b> + + + + Tapered + Conique + Taper angle for the hole @@ -4231,131 +4438,6 @@ over 90: larger hole radius at the bottom Reversed Inversat - - - - Diameter - Diametru - - - - - Depth - Adâncimea - - - - Class - Clasă - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Conique - - - - Direction - Direcţia - - - - Flat - Plat - - - - Angled - In unghi - - - - Right hand - Mâna dreaptă - - - - Left hand - Mâna stângă - - - - Threaded - Filetul - - - - Profile - Profil - - - - Countersink angle - Unghi de frezare - - - - - Dimension - Dimensiune - - - - Through all - Prin toate - - - - Size - Dimensiune - - - - <b>Drill point</b> - <b>Punct de găurire</b> - - - - <b>Misc</b> - <b>Diferite</b> - - - - <b>Hole cut</b> - <b>gaura decupată</b> - - - - <b>Threading and size</b> - <b>filetare şi dimensiune</b> - Normal @@ -4382,16 +4464,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index 315cce9c0f..f33928e61e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index c94a87be12..e32ade26c2 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Эвольвентная передача... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Звездочка... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -11,12 +93,12 @@ Additive helix - Additive helix + Аддитивная спираль Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + Выдавить выбранный эскиз по спирали @@ -552,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Создать новую под-объектную связующую форму @@ -565,12 +647,12 @@ Subtractive helix - Subtractive helix + Субтрактивная спираль Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + Выдавить выбранный эскиз по спирали и вычесть его из тела @@ -755,13 +837,13 @@ Create Clone - Create Clone + Клонировать Make copy - Make copy + Сделать копию @@ -771,7 +853,7 @@ Create a new Sketch - Create a new Sketch + Создать новый эскиз @@ -786,7 +868,7 @@ Add a Body - Add a Body + Добавить тело @@ -905,7 +987,7 @@ Module: - Module: + Модуль: @@ -984,18 +1066,18 @@ Geometric Primitives Геометрические примитивы - - - - Width: - Ширина: - Length: Длина: + + + + Width: + Ширина: + @@ -1005,12 +1087,6 @@ Height: Высота: - - - - Angle: - Угол: - @@ -1047,7 +1123,7 @@ Rotation angle: - Rotation angle: + Угол поворота: @@ -1063,6 +1139,12 @@ Radius 2: Радиус 2: + + + + Angle: + Угол: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Конечная точка - Start point Начальная точка + + + End point + Конечная точка + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Добавить + + + Remove + Удалить + - select an item to highlight it @@ -1418,7 +1505,7 @@ click again to end selection Flip direction - Flip direction + Сменить направление на противоположное @@ -1435,11 +1522,6 @@ click again to end selection Angle Угол - - - Remove - Удалить - @@ -1714,6 +1796,11 @@ click again to end selection Add Добавить + + + Remove + Удалить + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Радиус: - - - Remove - Удалить - @@ -1760,7 +1842,7 @@ click again to end selection Status: - Status: + Состояние: @@ -1844,12 +1926,12 @@ click again to end selection Turns: - Turns: + Оборотов: Cone angle: - Cone angle: + Угол конусности: @@ -1859,7 +1941,7 @@ click again to end selection Left handed - Left handed + Левосторонняя спираль @@ -1869,7 +1951,7 @@ click again to end selection Remove outside of profile - Remove outside of profile + Удалить внешний профиль @@ -1879,21 +1961,11 @@ click again to end selection Helix parameters - Helix parameters + Параметры спирали PartDesignGui::TaskHoleParameters - - - Hole parameters - Параметры отверстия - - - - None - Ничего - Counterbore @@ -1919,10 +1991,20 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Параметры отверстия + + + + None + Ничего + ISO metric regular profile - ISO metric regular profile + ISO метрический грубый профиль @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Выбор не является Активным Телом - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Отсутствуют допустимые детали в этом документе. + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -3780,7 +3862,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit helix - Edit helix + Редактировать спираль @@ -3803,37 +3885,37 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ANSI 25 - ANSI 25 + ANSI 25 ANSI 35 - ANSI 35 + ANSI 35 ANSI 41 - ANSI 41 + ANSI 41 ANSI 40 - ANSI 40 + ANSI 40 ANSI 50 - ANSI 50 + ANSI 50 ANSI 60 - ANSI 60 + ANSI 60 ANSI 80 - ANSI 80 + ANSI 80 @@ -3883,37 +3965,37 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ISO 606 06B - ISO 606 06B + ISO 606 06B ISO 606 08B - ISO 606 08B + ISO 606 08B ISO 606 10B - ISO 606 10B + ISO 606 10B ISO 606 12B - ISO 606 12B + ISO 606 12B ISO 606 16B - ISO 606 16B + ISO 606 16B ISO 606 20B - ISO 606 20B + ISO 606 20B ISO 606 24B - ISO 606 24B + ISO 606 24B @@ -4107,11 +4189,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Параметры задачи отверстия + + + <b>Threading and size</b> + <b>Резьба и размер</b> + + + + Profile + Профиль + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + С резьбой + Whether the hole gets a modelled thread @@ -4155,6 +4252,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Направление + + + + Right hand + Правая + + + + Left hand + Левая + + + + Size + Размер + Hole clearance @@ -4181,16 +4298,44 @@ Only available for holes without thread Wide Wide + + + Class + Класс + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Диаметр + Hole diameter Hole diameter + + + + Depth + Глубина + + + + + Dimension + Размер + + + + Through all + Насквозь + Thread Depth @@ -4206,12 +4351,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Углубление под шляпку</b> + Type Тип + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Угол зенковки + + + + <b>Drill point</b> + <b>Сверлить точку</b> + + + + Flat + Плоскость + + + + Angled + Уготватость + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Разное</b> + + + + Tapered + Сужение + Taper angle for the hole @@ -4233,131 +4440,6 @@ over 90: larger hole radius at the bottom Reversed В обратную сторону - - - - Diameter - Диаметр - - - - - Depth - Глубина - - - - Class - Класс - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Сужение - - - - Direction - Направление - - - - Flat - Плоскость - - - - Angled - Уготватость - - - - Right hand - Правая - - - - Left hand - Левая - - - - Threaded - С резьбой - - - - Profile - Профиль - - - - Countersink angle - Угол зенковки - - - - - Dimension - Размер - - - - Through all - Насквозь - - - - Size - Размер - - - - <b>Drill point</b> - <b>Сверлить точку</b> - - - - <b>Misc</b> - <b>Разное</b> - - - - <b>Hole cut</b> - <b>Углубление под шляпку</b> - - - - <b>Threading and size</b> - <b>Резьба и размер</b> - Normal @@ -4384,16 +4466,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm index a08a539d2c..fdf62d01c6 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.ts index 6547f7452e..0086e34b8c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sk.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Základné geometrické tvary - - - - Width: - Šírka: - Length: Dĺžka: + + + + Width: + Šírka: + @@ -1005,12 +1087,6 @@ Height: Výška: - - - - Angle: - Uhol: - @@ -1063,6 +1139,12 @@ Radius 2: Polomer č. 2: + + + + Angle: + Uhol: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Koncový bod - Start point Počiatočný bod + + + End point + Koncový bod + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Pridať + + + Remove + Odstrániť + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Uhol - - - Remove - Odstrániť - @@ -1714,6 +1796,11 @@ click again to end selection Add Pridať + + + Remove + Odstrániť + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Polomer: - - - Remove - Odstrániť - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Parametre otvoru - - - - None - Žiadny - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Parametre otvoru + + + + None + Žiadny + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Výber nie je v aktívnom tele - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Žadne platné prvky v tomto dokumente + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Parametre otvoru úlohy + + + <b>Threading and size</b> + <b> Závitovanie a veľkosť </b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Závitové + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Smer + + + + Right hand + Pravá ruka + + + + Left hand + Ľavá ruka + + + + Size + Veľkosť + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Trieda + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Hĺbka + + + + + Dimension + Kóta + + + + Through all + Cez všetko + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b> Vyrezanie otvoru </b> + Type Typ + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Uhol zahĺbenia + + + + <b>Drill point</b> + <b> Miesto vŕtania </b> + + + + Flat + Plochý + + + + Angled + Uhlový + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b> Rôzne </b> + + + + Tapered + Zúžené + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Obrátený - - - - Diameter - Diameter - - - - - Depth - Hĺbka - - - - Class - Trieda - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Zúžené - - - - Direction - Smer - - - - Flat - Plochý - - - - Angled - Uhlový - - - - Right hand - Pravá ruka - - - - Left hand - Ľavá ruka - - - - Threaded - Závitové - - - - Profile - Profil - - - - Countersink angle - Uhol zahĺbenia - - - - - Dimension - Kóta - - - - Through all - Cez všetko - - - - Size - Veľkosť - - - - <b>Drill point</b> - <b> Miesto vŕtania </b> - - - - <b>Misc</b> - <b> Rôzne </b> - - - - <b>Hole cut</b> - <b> Vyrezanie otvoru </b> - - - - <b>Threading and size</b> - <b> Závitovanie a veľkosť </b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm index d11297acb4..ffe1e51a15 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 9c809184ad..39a94ac76d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Evolventni zobnik ... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Verižnik ... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -981,18 +1063,18 @@ Geometric Primitives Geometrijski osnovniki - - - - Width: - Širina: - Length: Dolžina: + + + + Width: + Širina: + @@ -1002,12 +1084,6 @@ Height: Višina: - - - - Angle: - Kót: - @@ -1060,6 +1136,12 @@ Radius 2: Polmer 2: + + + + Angle: + Kót: + @@ -1229,16 +1311,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Končna točka - Start point Začetna točka + + + End point + Končna točka + PartDesignGui::DlgReference @@ -1385,6 +1467,11 @@ s ponovnim klikom pa zaključite izbiranje Add Dodaj + + + Remove + Odstrani + - select an item to highlight it @@ -1432,11 +1519,6 @@ s ponovnim klikom pa zaključite izbiranje Angle Kot - - - Remove - Odstrani - @@ -1711,6 +1793,11 @@ s ponovnim klikom pa zaključite izbiranje Add Dodaj + + + Remove + Odstrani + - select an item to highlight it @@ -1723,11 +1810,6 @@ s ponovnim klikom pa zaključite izbiranje Radius: Polmer: - - - Remove - Odstrani - @@ -1881,16 +1963,6 @@ s ponovnim klikom pa zaključite izbiranje PartDesignGui::TaskHoleParameters - - - Hole parameters - Določilke luknje - - - - None - Brez - Counterbore @@ -1916,6 +1988,16 @@ s ponovnim klikom pa zaključite izbiranje Cap screw (deprecated) Valjni vijak (zastarelo) + + + Hole parameters + Določilke luknje + + + + None + Brez + ISO metric regular profile @@ -3281,6 +3363,11 @@ s ponovnim klikom pa zaključite izbiranje Cannot use this command as there is no solid to subtract from. Tega ukaza ni mogoče izvesti, ker ni telesa, od katerega bi odštevali. + + + Ensure that the body contains a feature before attempting a subtractive command. + Preden poskusite z odjemnim ukazom se prepričajte, da telo vsebuje značilnost. + Cannot use selected object. Selected object must belong to the active body @@ -3319,21 +3406,6 @@ s ponovnim klikom pa zaključite izbiranje Select an edge, face, or body from a single body. Izberi rob, ploskev ali telo enega samega telesa. - - - Select an edge, face, or body from an active body. - Izberi rob, ploskev ali telo iz dejavnega telesa. - - - - Please create a feature first. - Najprej ustvari značilnost. - - - - Please select only one feature in an active body. - Izberite le eno značilnost dejavnega telesa. - @@ -3341,9 +3413,9 @@ s ponovnim klikom pa zaključite izbiranje Izbira ni v Aktivnem Telesu - - Ensure that the body contains a feature before attempting a subtractive command. - Preden poskusite z odjemnim ukazom se prepričajte, da telo vsebuje značilnost. + + Select an edge, face, or body from an active body. + Izberi rob, ploskev ali telo iz dejavnega telesa. @@ -3370,6 +3442,16 @@ s ponovnim klikom pa zaključite izbiranje No valid features in this document Ni veljavnih značilnosti v tem dokumentu + + + Please create a feature first. + Najprej ustvari značilnost. + + + + Please select only one feature in an active body. + Izberite le eno značilnost dejavnega telesa. + Part creation failed @@ -3961,7 +4043,7 @@ Neglede na to je selitev v bodoče z "Oblikovanje delov -> Preseli" mogoča k Roller Diameter: - Roller Diameter: + Premer valjčka: @@ -4105,11 +4187,26 @@ Neglede na to je selitev v bodoče z "Oblikovanje delov -> Preseli" mogoča k Task Hole Parameters Določilke luknje + + + <b>Threading and size</b> + <b>Navoj in velikost</b> + + + + Profile + Profil + Whether the hole gets a thread Ali se luknji doda navoj + + + Threaded + Z navojem + Whether the hole gets a modelled thread @@ -4153,6 +4250,26 @@ Pozor, izračunavanje lahko traja neka časa Custom Thread clearance value Vrednost zračnosti navoja po meri + + + Direction + Smer + + + + Right hand + Desnosučni + + + + Left hand + Levosučni + + + + Size + Velikost + Hole clearance @@ -4179,16 +4296,44 @@ Na voljo le pri luknjah breh navoja Wide Velika + + + Class + Razred + Tolerance class for threaded holes according to hole profile Razred dopustnega odstopanja pri notranjih navojih glede na presek luknje + + + + Diameter + Premer + Hole diameter Premer luknje + + + + Depth + Globina + + + + + Dimension + Mera + + + + Through all + Skozi vse + Thread Depth @@ -4204,12 +4349,74 @@ Na voljo le pri luknjah breh navoja Tapped (DIN76) Koničasta (DIN76) + + + <b>Hole cut</b> + <b>Izvrtina</b> + Type Vrsta + + + Cut type for screw heads + Vrsta zareza za glavice vijakov + + + + Check to override the values predefined by the 'Type' + Označite, če želite povoziti prednastavljene vrednosti v "Vrsti" + + + + Custom values + Vrednosti po meri + + + + Countersink angle + Kot stožčaste izvrtine + + + + <b>Drill point</b> + <b>Konica vrtanja</b> + + + + Flat + Plosko + + + + Angled + Pod kotom + + + + The size of the drill point will be taken into +account for the depth of blind holes + Pri globini slepih lukenj +bo upoštevana velikost vrtalne konice + + + + Take into account for depth + Upoštevaj pri globini + + + + <b>Misc</b> + <b>Ostalo</b> + + + + Tapered + Koničast + Taper angle for the hole @@ -4231,131 +4438,6 @@ nad 90: v spodnjem delu večji premer luknje Reversed Obratno - - - - Diameter - Premer - - - - - Depth - Globina - - - - Class - Razred - - - - Cut type for screw heads - Vrsta zareza za glavice vijakov - - - - Check to override the values predefined by the 'Type' - Označite, če želite povoziti prednastavljene vrednosti v "Vrsti" - - - - Custom values - Vrednosti po meri - - - - The size of the drill point will be taken into -account for the depth of blind holes - Pri globini slepih lukenj -bo upoštevana velikost vrtalne konice - - - - Take into account for depth - Upoštevaj pri globini - - - - Tapered - Koničast - - - - Direction - Smer - - - - Flat - Plosko - - - - Angled - Pod kotom - - - - Right hand - Desnosučni - - - - Left hand - Levosučni - - - - Threaded - Z navojem - - - - Profile - Profil - - - - Countersink angle - Kot stožčaste izvrtine - - - - - Dimension - Mera - - - - Through all - Skozi vse - - - - Size - Velikost - - - - <b>Drill point</b> - <b>Konica vrtanja</b> - - - - <b>Misc</b> - <b>Ostalo</b> - - - - <b>Hole cut</b> - <b>Izvrtina</b> - - - - <b>Threading and size</b> - <b>Navoj in velikost</b> - Normal @@ -4364,7 +4446,7 @@ bo upoštevana velikost vrtalne konice Loose - Loose + Ohlapno @@ -4382,16 +4464,16 @@ bo upoštevana velikost vrtalne konice Workbench - - - &Part Design - Oblikovanje &delov - &Sketch &Očrt + + + &Part Design + Oblikovanje &delov + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm index e6cca90e67..4f3ae1f246 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index 6ac31bd830..5e6382f256 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Геометријcки Примитиви - - - - Width: - Ширина: - Length: Дужина: + + + + Width: + Ширина: + @@ -1005,12 +1087,6 @@ Height: Висина: - - - - Angle: - Угао: - @@ -1063,6 +1139,12 @@ Radius 2: Полупречник 2: + + + + Angle: + Угао: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Крајња тачка - Start point Почетна тачка + + + End point + Крајња тачка + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Додај + + + Remove + Obriši + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Угао - - - Remove - Obriši - @@ -1714,6 +1796,11 @@ click again to end selection Add Додај + + + Remove + Obriši + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Полупречник: - - - Remove - Obriši - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hole parameters - - - - None - Ниједан - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hole parameters + + + + None + Ниједан + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selection is not in Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Нема важећих функција у овом документу + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + Профил + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Правац + + + + Right hand + Десни навој + + + + Left hand + Леви навој + + + + Size + Величина + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Пречник + Hole diameter Hole diameter + + + + Depth + Дубина + + + + + Dimension + Димензија + + + + Through all + Кроз све + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type Тип + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Обрнуто - - - - Diameter - Пречник - - - - - Depth - Дубина - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Правац - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Десни навој - - - - Left hand - Леви навој - - - - Threaded - Threaded - - - - Profile - Профил - - - - Countersink angle - Countersink angle - - - - - Dimension - Димензија - - - - Through all - Кроз све - - - - Size - Величина - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm index f204d9f281..a952ad7597 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index c794906d73..8d38ccc7d6 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Geometriska primitiver - - - - Width: - Bredd: - Length: Längd: + + + + Width: + Bredd: + @@ -1005,12 +1087,6 @@ Height: Höjd: - - - - Angle: - Vinkel: - @@ -1063,6 +1139,12 @@ Radius 2: Radie 2: + + + + Angle: + Vinkel: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Slutpunkt - Start point Startpunkt + + + End point + Slutpunkt + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Lägg till + + + Remove + Ta bort + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Vinkel - - - Remove - Ta bort - @@ -1714,6 +1796,11 @@ click again to end selection Add Lägg till + + + Remove + Ta bort + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Radie: - - - Remove - Ta bort - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Hålparametrar - - - - None - Ingen - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Hålparametrar + + + + None + Ingen + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Markering är inte i aktiv kropp - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Inga giltiga föremål i det här dokumentet + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4103,11 +4185,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Aktivitet hål parametrar + + + <b>Threading and size</b> + <b>Gängning och storlek</b> + + + + Profile + Profil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Gängad + Whether the hole gets a modelled thread @@ -4151,6 +4248,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Riktning + + + + Right hand + Höger hand + + + + Left hand + Vänster hand + + + + Size + Storlek + Hole clearance @@ -4177,16 +4294,44 @@ Only available for holes without thread Wide Wide + + + Class + Klass + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diameter + Hole diameter Hole diameter + + + + Depth + Djup + + + + + Dimension + Dimension + + + + Through all + Genom alla + Thread Depth @@ -4202,12 +4347,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hålskär</b> + Type Typ + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Anpassade värden + + + + Countersink angle + Sned försänkningsvinkel + + + + <b>Drill point</b> + <b>borrpunkt</b> + + + + Flat + Platt + + + + Angled + Vinklad + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Diverse</b> + + + + Tapered + Avsmalnande + Taper angle for the hole @@ -4229,131 +4436,6 @@ over 90: larger hole radius at the bottom Reversed Omvänd - - - - Diameter - Diameter - - - - - Depth - Djup - - - - Class - Klass - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Anpassade värden - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Avsmalnande - - - - Direction - Riktning - - - - Flat - Platt - - - - Angled - Vinklad - - - - Right hand - Höger hand - - - - Left hand - Vänster hand - - - - Threaded - Gängad - - - - Profile - Profil - - - - Countersink angle - Sned försänkningsvinkel - - - - - Dimension - Dimension - - - - Through all - Genom alla - - - - Size - Storlek - - - - <b>Drill point</b> - <b>borrpunkt</b> - - - - <b>Misc</b> - <b>Diverse</b> - - - - <b>Hole cut</b> - <b>Hålskär</b> - - - - <b>Threading and size</b> - <b>Gängning och storlek</b> - Normal @@ -4380,16 +4462,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm index 3475aabb34..e6dd858272 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index 03d8c1dbba..11cbfca4c4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Evolvent dişlisi... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Cer Dişlisi + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -11,7 +93,7 @@ Additive helix - Additive helix + Ek sarmal @@ -552,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Alt nesne(ler) şekil bağlayıcı oluştur @@ -565,12 +647,12 @@ Subtractive helix - Subtractive helix + Çıkartılır sarmal Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + Seçilen taslağı, bir sarmal boyunca süpürün ve oluşan şekli gövdeden kaldırın @@ -745,12 +827,12 @@ Create ShapeBinder - Create ShapeBinder + Şekil Bağlayıcı oluştur Create SubShapeBinder - Create SubShapeBinder + Alt Şekil Bağlayıcı oluştur @@ -776,42 +858,42 @@ Convert to MultiTransform feature - Convert to MultiTransform feature + Çoklu Dönüşüm özelliğine çevir Create Boolean - Create Boolean + Mantıksal (İşlem) Oluştur Add a Body - Add a Body + Gövde Ekle Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Eski parça tasarım özelliklerini Gövdelere aktar Move tip to selected feature - Move tip to selected feature + İpucunu seçilen öğeye taşı Duplicate a PartDesign object - Duplicate a PartDesign object + Bir Parça Tasarımı nesnesini çoğalt Move an object - Move an object + Bir nesne taşı Move an object inside tree - Move an object inside tree + Bir nesneyi işlem ağacı içerisinde taşı @@ -821,7 +903,7 @@ Make LinearPattern - Make LinearPattern + Doğrusal Çoğaltma yap @@ -905,7 +987,7 @@ Module: - Module: + Modül: @@ -943,10 +1025,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + İstenen özellik oluşturulamıyor. Nedeni şunlar olabilir: + - etkin Gövde bir temel şekil içermiyor, yani kaldırılacak + bir malzeme bulunmuyor; + - seçili eskiz etkin Gövdeye ait değil. @@ -957,10 +1039,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + İstenen özellik oluşturulamıyor. Nedeni şunlar olabilir: + - etkin Gövde bir temel şekil içermiyor, yani kaldırılacak + bir malzeme bulunmuyor; + - seçili eskiz etkin Gövdeye ait değil. @@ -971,10 +1053,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + İstenen özellik oluşturulamıyor. Nedeni şunlar olabilir: + - etkin Gövde bir temel şekil içermiyor, yani kaldırılacak + bir malzeme bulunmuyor; + - seçili eskiz etkin Gövdeye ait değil. @@ -984,18 +1066,18 @@ Geometric Primitives Geometrik Primitifler - - - - Width: - Genişlik: - Length: Uzunluk: + + + + Width: + Genişlik: + @@ -1005,12 +1087,6 @@ Height: Yükseklik: - - - - Angle: - Açı: - @@ -1024,25 +1100,25 @@ Angle in first direction: - Angle in first direction: + İlk yöndeki açı: Angle in first direction - Angle in first direction + İlk yöndeki açı Angle in second direction: - Angle in second direction: + İkinci yöndeki açı: Angle in second direction - Angle in second direction + İkinci yöndeki açı @@ -1063,6 +1139,12 @@ Radius 2: Yarıçap 2: + + + + Angle: + Açı: + @@ -1093,8 +1175,8 @@ Radius in local y-direction If zero, it is equal to Radius2 - Radius in local y-direction -If zero, it is equal to Radius2 + Bölgesel y yönündeki yarıçap +Sıfır ise Yarıçap2'ye eşittir @@ -1105,12 +1187,12 @@ If zero, it is equal to Radius2 Radius in local xy-plane - Radius in local xy-plane + Bölgesel xy düzlemindeki yarıçap Radius in local xz-plane - Radius in local xz-plane + Bölgesel xz düzlemindeki yarıçap @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Son nokta - Start point Başlangıç noktası + + + End point + Son nokta + PartDesignGui::DlgReference @@ -1253,7 +1335,7 @@ If zero, it is equal to Radius2 You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. - You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. + Etkin gövdenin parçası olmayan şekiller seçtiniz. Bu seçimlerin nasıl kullanılacağını tanımlayınız. Eğer bu kaynak şekilleri istemiyorsanız komutu iptal edin. @@ -1332,34 +1414,34 @@ If zero, it is equal to Radius2 Cone radii are equal - Cone radii are equal + Koni yarıçapları eşit The radii for cones must not be equal! - The radii for cones must not be equal! + Koniler için yarıçapları eşit olamaz! Invalid wedge parameters - Invalid wedge parameters + Geçersiz kama değişkenleri X min must not be equal to X max! - X min must not be equal to X max! + En küçük X, en büyük X 'e eşit olamaz! Y min must not be equal to Y max! - Y min must not be equal to Y max! + En küçük Y, en büyük Y 'ye eşit olamaz! Z min must not be equal to Z max! - Z min must not be equal to Z max! + En küçük Z, en büyük Z 'ye eşit olamaz! @@ -1380,20 +1462,25 @@ If zero, it is equal to Radius2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Seçim kipine girmek için düğmeye basın, +seçimi bitirmek için tekrar basın Add Ekle + + + Remove + Kaldır + - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - vurgulamak için bir nesne seçin +- pahları görmek için ögeye çift tıklayın @@ -1403,22 +1490,22 @@ click again to end selection Equal distance - Equal distance + Eşit mesafe Two distances - Two distances + İki adet mesafe Distance and angle - Distance and angle + Mesafe ve açı Flip direction - Flip direction + Yönü değiştir @@ -1428,25 +1515,20 @@ click again to end selection Size 2 - Size 2 + Boyut 2 Angle Açı - - - Remove - Kaldır - There must be at least one item - There must be at least one item + En azından bir nesne olmalı @@ -1456,7 +1538,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + En azından bir nesne seçili kalmalıdır. @@ -1527,8 +1609,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Seçim kipine girmek için düğmeye basın, +seçimi bitirmek için tekrar basın @@ -1544,8 +1626,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the drafts - - select an item to highlight it -- double-click on an item to see the drafts + - vurgulamak için bir nesne seçin +- tasları görmek için ögeye çift tıklayın @@ -1573,7 +1655,7 @@ click again to end selection There must be at least one item - There must be at least one item + En azından bir nesne olmalı @@ -1583,7 +1665,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + En azından bir nesne seçili kalmalıdır. @@ -1597,7 +1679,7 @@ click again to end selection There must be at least one item - There must be at least one item + En azından bir nesne olmalı @@ -1706,38 +1788,38 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Seçim kipine girmek için düğmeye basın, +seçimi bitirmek için tekrar basın Add Ekle + + + Remove + Kaldır + - select an item to highlight it - double-click on an item to see the fillets - - select an item to highlight it -- double-click on an item to see the fillets + - vurgulamak için bir nesne seçin +- köşe yuvarlamalarını görmek için ögeye çift tıklayın Radius: Yarıçap: - - - Remove - Kaldır - There must be at least one item - There must be at least one item + En azından bir nesne olmalı @@ -1747,7 +1829,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + En azından bir nesne seçili kalmalıdır. @@ -1829,7 +1911,7 @@ click again to end selection Height-Turns-Growth - Height-Turns-Growth + Yükseklik-Dönüş-Artış @@ -1844,12 +1926,12 @@ click again to end selection Turns: - Turns: + Dönüş: Cone angle: - Cone angle: + Koni açısı: @@ -1859,7 +1941,7 @@ click again to end selection Left handed - Left handed + Solak Modu @@ -1869,7 +1951,7 @@ click again to end selection Remove outside of profile - Remove outside of profile + Profilin dış hattını kaldır @@ -1879,21 +1961,11 @@ click again to end selection Helix parameters - Helix parameters + Sarmal değişkenleri PartDesignGui::TaskHoleParameters - - - Hole parameters - Delik parametreleri - - - - None - Hiçbiri - Counterbore @@ -1919,10 +1991,20 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Delik parametreleri + + + + None + Hiçbiri + ISO metric regular profile - ISO metric regular profile + ISO metrik standart profil @@ -1965,7 +2047,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Liste, sürüklenerek tekrar sıralanabilir @@ -2048,7 +2130,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Liste, sürüklenerek tekrar sıralanabilir @@ -2086,7 +2168,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Liste, sürüklenerek tekrar sıralanabilir @@ -2134,7 +2216,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Liste, sürüklenerek tekrar sıralanabilir @@ -2225,13 +2307,13 @@ click again to end selection Use custom vector for pad direction otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction otherwise -the sketch plane's normal vector will be used + Katılaştırıcı yönü için özel vektör kullanın +yoksa eskiz düzlemine dik vektör kullanılacak Use custom direction - Use custom direction + Özel yön kullan @@ -2241,7 +2323,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + yön vektörünün x bileşeni @@ -2251,7 +2333,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + yön vektörünün y bileşeni @@ -2261,19 +2343,19 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + yön vektörünün z bileşeni If unchecked, the length will be measured along the specified direction - If unchecked, the length will be -measured along the specified direction + İşaret kaldırılırsa, uzunluk +belirlenen yön boyunca ölçülecek Length along sketch normal - Length along sketch normal + Eskize dik doğrultudaki uzunluk @@ -2283,12 +2365,12 @@ measured along the specified direction Offset from face in which pad will end - Offset from face in which pad will end + Katı yapmanın biteceği yüzden ötele Applies length symmetrically to sketch plane - Applies length symmetrically to sketch plane + Uzunluğu, taslak düzlemine simetrik olarak uygular @@ -2298,7 +2380,7 @@ measured along the specified direction Reverses pad direction - Reverses pad direction + Katılaştırıcı yönünü ters çevirir @@ -2378,7 +2460,7 @@ measured along the specified direction Fixed - Onarıldı + Sabitle @@ -2523,7 +2605,7 @@ measured along the specified direction No active body - No active body + Etkin gövde yok @@ -2681,7 +2763,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Liste, sürüklenerek tekrar sıralanabilir @@ -2896,8 +2978,8 @@ measured along the specified direction Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Seçim kipine girmek için düğmeye basın, +seçimi bitirmek için tekrar basın @@ -2913,8 +2995,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the features - - select an item to highlight it -- double-click on an item to see the features + - vurgulamak için bir nesne seçin +- çizim özelliklerini görmek için ögeye çift tıklayın @@ -2968,7 +3050,7 @@ click again to end selection There must be at least one item - There must be at least one item + En azından bir nesne olmalı @@ -2978,7 +3060,7 @@ click again to end selection At least one item must be kept. - At least one item must be kept. + En azından bir nesne seçili kalmalıdır. @@ -3062,12 +3144,12 @@ click again to end selection Create an additive box by its width, height, and length - Create an additive box by its width, height, and length + Genişlik, yükseklik ve uzunluğuna göre ek bir kutu oluşturun Create an additive cylinder by its radius, height, and angle - Create an additive cylinder by its radius, height, and angle + Yarı çap, yükseklik ve açısını girerek ilave bir silindir oluşturun @@ -3211,7 +3293,7 @@ click again to end selection Sub-Shape Binder - Sub-Shape Binder + Alt Şekil Bağlayıcı @@ -3282,17 +3364,22 @@ click again to end selection Cannot use this command as there is no solid to subtract from. - Cannot use this command as there is no solid to subtract from. + Çıkartılacak bir katı olmadığından dolayı bu komutu kullanamazsınız. + + + + Ensure that the body contains a feature before attempting a subtractive command. + Bir parça çıkartma komutu işleme girmeden önce çizim özelliği içeren bir gövde bulundurun. Cannot use selected object. Selected object must belong to the active body - Cannot use selected object. Selected object must belong to the active body + Seçilen nesneyi kullanamazsınız. Seçilen nesne, etkin gövdeye ait olmalıdır Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. - Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. + Bir gövdedeki dış geometriyi kaynak olarak almak için Şekil Bağlayıcı veya Temel Parça Özelliği kullanmayı göz önünde bulundurun. @@ -3315,27 +3402,12 @@ click again to end selection Select an edge, face, or body. - Select an edge, face, or body. + Bir kenar, yüz veya gövde seçin. Select an edge, face, or body from a single body. - Select an edge, face, or body from a single body. - - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. + Tek bir gövdeden bir kenar, yüz veya gövde seçin. @@ -3344,9 +3416,9 @@ click again to end selection Seçim Aktif Gövdede Değil - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Etkin bir gövdeden bir kenar, yüz veya gövde seçin. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Bu belgede geçerli bir özellik yok + + + Please create a feature first. + Lütfen önce bir çizim özelliği oluşturun. + + + + Please select only one feature in an active body. + Lütfen etkin gövdedeki tek bir çizim özelliğini seçin. + Part creation failed @@ -3452,7 +3534,7 @@ Bu, beklenmedik sonuçlara neden olabilir. No PartDesign features found that don't belong to a body. Nothing to migrate. - No PartDesign features found that don't belong to a body. Nothing to migrate. + Gövdeye ait olmayan hiçbir Parça Tasarımı özelliği bulunamadı. Aktarılacak bir şey yok. @@ -3528,14 +3610,14 @@ Bu, beklenmedik sonuçlara neden olabilir. Dependency violation - Dependency violation + Bağımlılık ihlali Early feature must not depend on later feature. - Early feature must not depend on later feature. + Eski özellik, sonraki özellikle bağlı olamaz. @@ -3781,7 +3863,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit helix - Edit helix + Sarmalı düzenle @@ -3789,7 +3871,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket parameter - Sprocket parameter + Cer dişlisi değişkeni @@ -3799,7 +3881,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Reference - Sprocket Reference + Cer Dişlisi Kaynak Noktası @@ -3819,152 +3901,152 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ANSI 40 - ANSI 40 + ANSI 40 ANSI 50 - ANSI 50 + ANSI 50 ANSI 60 - ANSI 60 + ANSI 60 ANSI 80 - ANSI 80 + ANSI 80 ANSI 100 - ANSI 100 + ANSI 100 ANSI 120 - ANSI 120 + ANSI 120 ANSI 140 - ANSI 140 + ANSI 140 ANSI 160 - ANSI 160 + ANSI 160 ANSI 180 - ANSI 180 + ANSI 180 ANSI 200 - ANSI 200 + ANSI 200 ANSI 240 - ANSI 240 + ANSI 240 Bicycle with Derailleur - Bicycle with Derailleur + Vitesli Bisiklet Bicycle without Derailleur - Bicycle without Derailleur + Vitessiz Bisiklet ISO 606 06B - ISO 606 06B + ISO 606 06B ISO 606 08B - ISO 606 08B + ISO 606 08B ISO 606 10B - ISO 606 10B + ISO 606 10B ISO 606 12B - ISO 606 12B + ISO 606 12B ISO 606 16B - ISO 606 16B + ISO 606 16B ISO 606 20B - ISO 606 20B + ISO 606 20B ISO 606 24B - ISO 606 24B + ISO 606 24B Motorcycle 420 - Motorcycle 420 + Motosiklet 420 Motorcycle 425 - Motorcycle 425 + Motosiklet 425 Motorcycle 428 - Motorcycle 428 + Motosiklet 428 Motorcycle 520 - Motorcycle 520 + Motosiklet 520 Motorcycle 525 - Motorcycle 525 + Motosiklet 525 Motorcycle 530 - Motorcycle 530 + Motosiklet 530 Motorcycle 630 - Motorcycle 630 + Motosiklet 630 Chain Pitch: - Chain Pitch: + Zincir Hatvesi: 0 in - 0 in + 0 inç Roller Diameter: - Roller Diameter: + Silindir Çapı: @@ -4108,27 +4190,42 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Görev deliği parametreleri + + + <b>Threading and size</b> + <b> İplik geçirme ve boyut </ b> + + + + Profile + Yan görünüm + Whether the hole gets a thread - Whether the hole gets a thread + Deliğe diş açma durumu + + + + Threaded + Dişli Whether the hole gets a modelled thread - Whether the hole gets a modelled thread + Deliğe modellenmiş diş açma durumu Model Thread - Model Thread + Diş Modelle Live update of changes to the thread Note that the calculation can take some time - Live update of changes to the thread -Note that the calculation can take some time + Diş değişikliklerini canlı güncelle +Hesaplamanın biraz zaman alabileceğini unutmayın @@ -4138,30 +4235,50 @@ Note that the calculation can take some time Customize thread clearance - Customize thread clearance + Diş boşluğunu özelleştir Custom Thread Clearance - Custom Thread Clearance + Özel Diş Boşluğu Clearance - Clearance + Boşluk Custom Thread clearance value - Custom Thread clearance value + Özel Diş boşluğu değeri + + + + Direction + Yön + + + + Right hand + Sağ el + + + + Left hand + Sol el + + + + Size + Boyut Hole clearance Only available for holes without thread - Hole clearance -Only available for holes without thread + Delik boşluğu +Sadece diş açılmamış delikler içindir @@ -4180,59 +4297,17 @@ Only available for holes without thread Wide - Wide + Geniş + + + + Class + Sınıf Tolerance class for threaded holes according to hole profile - Tolerance class for threaded holes according to hole profile - - - - Hole diameter - Hole diameter - - - - Thread Depth - Thread Depth - - - - Hole depth - Hole depth - - - - Tapped (DIN76) - Tapped (DIN76) - - - - - Type - Türü - - - - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom - - - - Reverses the hole direction - Reverses the hole direction - - - - Reversed - Ters çevirilmiş + Diş açılmış delikler için delik profiline göre tolerans sınıfı @@ -4240,89 +4315,17 @@ over 90: larger hole radius at the bottom Diameter Çap + + + Hole diameter + Delik çapı + Depth Derinlik - - - Class - Sınıf - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Konik - - - - Direction - Yön - - - - Flat - Düz - - - - Angled - Açılı - - - - Right hand - Sağ el - - - - Left hand - Sol el - - - - Threaded - Dişli - - - - Profile - Yan görünüm - - - - Countersink angle - Havşa açısı - @@ -4335,19 +4338,19 @@ account for the depth of blind holes Tümünün üzerinden - - Size - Boyut + + Thread Depth + Vida Dişi Derinliği - - <b>Drill point</b> - <b> Sondaj noktası </ b> + + Hole depth + Delik derinliği - - <b>Misc</b> - <B> Çeşitli </ b> + + Tapped (DIN76) + Diş Açılmış (DIN76) @@ -4355,9 +4358,87 @@ account for the depth of blind holes <b> Delik kesimi </ b> - - <b>Threading and size</b> - <b> İplik geçirme ve boyut </ b> + + + Type + Türü + + + + Cut type for screw heads + Vida başları için kesme türü + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Özel değerler + + + + Countersink angle + Havşa açısı + + + + <b>Drill point</b> + <b> Sondaj noktası </ b> + + + + Flat + Düz + + + + Angled + Açılı + + + + The size of the drill point will be taken into +account for the depth of blind holes + Kör deliklerin derinliği için matkap noktasının boyutu dikkate alınacaktır + + + + Take into account for depth + Derinliği dikkate al + + + + <b>Misc</b> + <B> Çeşitli </ b> + + + + Tapered + Konik + + + + Taper angle for the hole +90 degree: straight hole +under 90: smaller hole radius at the bottom +over 90: larger hole radius at the bottom + Delik için koniklik açısı +90 derece: düz delik +90 altı: altta daha küçük delik yarıçapı +90 üstü: altta daha büyük delik yarıçapı + + + + Reverses the hole direction + Delik yönünü ters çevirir + + + + Reversed + Ters çevirilmiş @@ -4367,7 +4448,7 @@ account for the depth of blind holes Loose - Loose + Bol @@ -4385,55 +4466,55 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch - &Sketch + &Eskiz + + + + &Part Design + &Parça Tasarımı Create a datum - Create a datum + Kaynak noktası elemanı oluştur Create an additive feature - Create an additive feature + İlave bir şekil özelliği oluştur Create a subtractive feature - Create a subtractive feature + Bir parça çıkartma özelliği oluştur Apply a pattern - Apply a pattern + Çoğaltma uygula Apply a dress-up feature - Apply a dress-up feature + Giydirme özelliği uygula Sprocket... - Sprocket... + Cer Dişlisi Involute gear... - Involute gear... + Evolvent dişlisi... Shaft design wizard - Shaft design wizard + Mil tasarım sihirbazı @@ -4443,12 +4524,12 @@ account for the depth of blind holes Part Design Helper - Part Design Helper + Parça Tasarım Yardımcısı Part Design Modeling - Part Design Modeling + Parça Tasarım Modellemesi diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm index d1475d41ca..9d483c951a 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index a225b45bf7..73bad36e4e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Евольвентне зачеплення... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Зірочка... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Геометричні примітиви - - - - Width: - Ширина: - Length: Довжина: + + + + Width: + Ширина: + @@ -1005,12 +1087,6 @@ Height: Висота: - - - - Angle: - Кут: - @@ -1063,6 +1139,12 @@ Radius 2: Радіус 2: + + + + Angle: + Кут: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Кінцева точка - Start point Початкова точка + + + End point + Кінцева точка + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Додати + + + Remove + Видалити + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Кут - - - Remove - Видалити - @@ -1714,6 +1796,11 @@ click again to end selection Add Додати + + + Remove + Видалити + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Радіус: - - - Remove - Видалити - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Параметри отвору - - - - None - Нічого - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Параметри отвору + + + + None + Нічого + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Перш ніж виконувати команду віднімання, переконайтеся, що предмет має таку можливість. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Виділення не є в Активному Тілі - - Ensure that the body contains a feature before attempting a subtractive command. - Перш ніж виконувати команду віднімання, переконайтеся, що предмет має таку можливість. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document В цьому документі відсутні припустимі властивості + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Різьба та розміри</b> + + + + Profile + Профіль + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + З різьбою + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Напрямок + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + Розмір + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Клас + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Діаметр + Hole diameter Hole diameter + + + + Depth + Глибина + + + + + Dimension + Розмірність + + + + Through all + Через всі + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Отвір, що вирізується</b> + Type Тип + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Точка свердління</b> + + + + Flat + Плоский + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Різне</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Зворотній - - - - Diameter - Діаметр - - - - - Depth - Глибина - - - - Class - Клас - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - Напрямок - - - - Flat - Плоский - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - З різьбою - - - - Profile - Профіль - - - - Countersink angle - Countersink angle - - - - - Dimension - Розмірність - - - - Through all - Через всі - - - - Size - Розмір - - - - <b>Drill point</b> - <b>Точка свердління</b> - - - - <b>Misc</b> - <b>Різне</b> - - - - <b>Hole cut</b> - <b>Отвір, що вирізується</b> - - - - <b>Threading and size</b> - <b>Різьба та розміри</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm index 852e763af5..104817a841 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts index f2a3c5f295..cef09a2f68 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Primitives geomètriques - - - - Width: - Amplària: - Length: Length: + + + + Width: + Amplària: + @@ -1005,12 +1087,6 @@ Height: Alçària: - - - - Angle: - Angle: - @@ -1063,6 +1139,12 @@ Radius 2: Radi 2: + + + + Angle: + Angle: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Punt final - Start point Punt inicial + + + End point + Punt final + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Afegir + + + Remove + Elimina + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Angle - - - Remove - Elimina - @@ -1714,6 +1796,11 @@ click again to end selection Add Afegir + + + Remove + Elimina + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Radi: - - - Remove - Elimina - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Paràmetres de forat - - - - None - Cap - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Paràmetres de forat + + + + None + Cap + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection La selecció no és en un cos de peça actiu - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document No hi ha cap funció vàlida en aquest document + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4105,11 +4187,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Paràmetres de l'acció de forat + + + <b>Threading and size</b> + <b>Roscatge i mida</b> + + + + Profile + Perfil + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Rosca + Whether the hole gets a modelled thread @@ -4153,6 +4250,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Direcció + + + + Right hand + A la dreta + + + + Left hand + A l'esquerra + + + + Size + Mida + Hole clearance @@ -4179,16 +4296,44 @@ Only available for holes without thread Wide Wide + + + Class + Classe + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Diàmetre + Hole diameter Hole diameter + + + + Depth + Profunditat + + + + + Dimension + Dimensió + + + + Through all + A través de totes + Thread Depth @@ -4204,12 +4349,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Tall de forat</b> + Type Tipus + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Angle d'aixamfranat + + + + <b>Drill point</b> + <b>Punt de perforació</b> + + + + Flat + Pla + + + + Angled + Angular + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Diversos</b> + + + + Tapered + Cònic + Taper angle for the hole @@ -4231,131 +4438,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Diàmetre - - - - - Depth - Profunditat - - - - Class - Classe - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Cònic - - - - Direction - Direcció - - - - Flat - Pla - - - - Angled - Angular - - - - Right hand - A la dreta - - - - Left hand - A l'esquerra - - - - Threaded - Rosca - - - - Profile - Perfil - - - - Countersink angle - Angle d'aixamfranat - - - - - Dimension - Dimensió - - - - Through all - A través de totes - - - - Size - Mida - - - - <b>Drill point</b> - <b>Punt de perforació</b> - - - - <b>Misc</b> - <b>Diversos</b> - - - - <b>Hole cut</b> - <b>Tall de forat</b> - - - - <b>Threading and size</b> - <b>Roscatge i mida</b> - Normal @@ -4382,16 +4464,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm index a9aab1877f..9ddf42c85c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts index 46b743420f..3306d50a2c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives Các đối tượng hình học cơ bản - - - - Width: - Bề rộng: - Length: Length: + + + + Width: + Bề rộng: + @@ -1005,12 +1087,6 @@ Height: Chiều cao: - - - - Angle: - Góc: - @@ -1063,6 +1139,12 @@ Radius 2: Bán kính 2: + + + + Angle: + Góc: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - Điểm kết thúc - Start point Điểm bắt đầu + + + End point + Điểm kết thúc + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add Thêm mới + + + Remove + Xóa bỏ + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle Góc - - - Remove - Xóa bỏ - @@ -1714,6 +1796,11 @@ click again to end selection Add Thêm mới + + + Remove + Xóa bỏ + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: Bán kính: - - - Remove - Xóa bỏ - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - Các thông số của lỗ - - - - None - Không - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + Các thông số của lỗ + + + + None + Không + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Đối tượng đã chọn không ở trong phần thân đang hoạt động - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document Không có bộ phận nào hợp lệ trong tài liệu này + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Các thông số của công tác tạo lỗ + + + <b>Threading and size</b> + <b> Tạo ren và kích thước </b> + + + + Profile + Cấu hình + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Có ren + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + Hướng + + + + Right hand + Tay phải + + + + Left hand + Tay trái + + + + Size + Kích cỡ + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Lớp + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + Đường kính + Hole diameter Hole diameter + + + + Depth + Chiều sâu + + + + + Dimension + Kích thước + + + + Through all + Qua tất cả + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b> Cắt lỗ </ b> + Type Kiểu + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Góc khoét xoáy rộng + + + + <b>Drill point</b> + <b> Điểm khoan </ b> + + + + Flat + Phẳng + + + + Angled + Có góc + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Hỗn hợp</b> + + + + Tapered + Vót nhọn + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed Reversed - - - - Diameter - Đường kính - - - - - Depth - Chiều sâu - - - - Class - Lớp - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Vót nhọn - - - - Direction - Hướng - - - - Flat - Phẳng - - - - Angled - Có góc - - - - Right hand - Tay phải - - - - Left hand - Tay trái - - - - Threaded - Có ren - - - - Profile - Cấu hình - - - - Countersink angle - Góc khoét xoáy rộng - - - - - Dimension - Kích thước - - - - Through all - Qua tất cả - - - - Size - Kích cỡ - - - - <b>Drill point</b> - <b> Điểm khoan </ b> - - - - <b>Misc</b> - <b>Hỗn hợp</b> - - - - <b>Hole cut</b> - <b> Cắt lỗ </ b> - - - - <b>Threading and size</b> - <b> Tạo ren và kích thước </b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm index 12436cfe06..3168ef4aec 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index f628b09c9f..96d4129ccf 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives 几何图元 - - - - Width: - 宽度: - Length: 长度: + + + + Width: + 宽度: + @@ -1005,12 +1087,6 @@ Height: 高度: - - - - Angle: - 角度: - @@ -1063,6 +1139,12 @@ Radius 2: 半径 2: + + + + Angle: + 角度: + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z: - - - End point - 终点 - Start point 起点 + + + End point + 终点 + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add 添加 + + + Remove + 删除 + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle 角度 - - - Remove - 删除 - @@ -1714,6 +1796,11 @@ click again to end selection Add 添加 + + + Remove + 删除 + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: 半径: - - - Remove - 删除 - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - 孔参数 - - - - None - 无 - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + 孔参数 + + + + None + 无 + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection 未在激活状态的实体中进行选择 - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document 本文档中无有效特征 + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters 任务孔参数 + + + <b>Threading and size</b> + <b>螺纹和尺寸 </b> + + + + Profile + 轮廓 + Whether the hole gets a thread 孔是否具有螺纹 + + + Threaded + 螺纹 + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + 方向 + + + + Right hand + 右旋 + + + + Left hand + 左旋 + + + + Size + 大小 + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + 种类 + Tolerance class for threaded holes according to hole profile 根据孔配置方案螺纹孔的公差等级 + + + + Diameter + 直径 + Hole diameter 孔直径 + + + + Depth + 深度 + + + + + Dimension + 尺寸标注 + + + + Through all + 通过所有 + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>孔切除</b> + Type 类型 + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + 自定义值 + + + + Countersink angle + 埋头孔角度 + + + + <b>Drill point</b> + <b>钻点</b> + + + + Flat + 平头孔 + + + + Angled + 斜钻孔 + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>杂项 </b> + + + + Tapered + 锥孔 + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed 反转 - - - - Diameter - 直径 - - - - - Depth - 深度 - - - - Class - 种类 - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - 自定义值 - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - 锥孔 - - - - Direction - 方向 - - - - Flat - 平头孔 - - - - Angled - 斜钻孔 - - - - Right hand - 右旋 - - - - Left hand - 左旋 - - - - Threaded - 螺纹 - - - - Profile - 轮廓 - - - - Countersink angle - 埋头孔角度 - - - - - Dimension - 尺寸标注 - - - - Through all - 通过所有 - - - - Size - 大小 - - - - <b>Drill point</b> - <b>钻点</b> - - - - <b>Misc</b> - <b>杂项 </b> - - - - <b>Hole cut</b> - <b>孔切除</b> - - - - <b>Threading and size</b> - <b>螺纹和尺寸 </b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &零件设计 - &Sketch &Sketch + + + &Part Design + &零件设计 + Create a datum diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm index 7bcbf901b8..4fbd6ccf0e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index 1631401bef..64798f8957 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaft + + + Shaft design wizard... + Shaft design wizard... + + + + Start the shaft design wizard + Start the shaft design wizard + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + CmdPartDesignAdditiveHelix @@ -984,18 +1066,18 @@ Geometric Primitives 基本幾何 - - - - Width: - 寬度： - Length: 長度： + + + + Width: + 寬度： + @@ -1005,12 +1087,6 @@ Height: 高度： - - - - Angle: - 角度： - @@ -1063,6 +1139,12 @@ Radius 2: 半徑 2： + + + + Angle: + 角度： + @@ -1232,16 +1314,16 @@ If zero, it is equal to Radius2 Z: Z： - - - End point - 最末點 - Start point 起始點 + + + End point + 最末點 + PartDesignGui::DlgReference @@ -1388,6 +1470,11 @@ click again to end selection Add 新增 + + + Remove + 移除 + - select an item to highlight it @@ -1435,11 +1522,6 @@ click again to end selection Angle 角度 - - - Remove - 移除 - @@ -1714,6 +1796,11 @@ click again to end selection Add 新增 + + + Remove + 移除 + - select an item to highlight it @@ -1726,11 +1813,6 @@ click again to end selection Radius: 半徑： - - - Remove - 移除 - @@ -1884,16 +1966,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - 圓孔參數 - - - - None - 無 - Counterbore @@ -1919,6 +1991,16 @@ click again to end selection Cap screw (deprecated) Cap screw (deprecated) + + + Hole parameters + 圓孔參數 + + + + None + 無 + ISO metric regular profile @@ -3284,6 +3366,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + Ensure that the body contains a feature before attempting a subtractive command. + Cannot use selected object. Selected object must belong to the active body @@ -3322,21 +3409,6 @@ click again to end selection Select an edge, face, or body from a single body. Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. - - - - Please create a feature first. - Please create a feature first. - - - - Please select only one feature in an active body. - Please select only one feature in an active body. - @@ -3344,9 +3416,9 @@ click again to end selection Selection is not in Active Body - - Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. + Select an edge, face, or body from an active body. @@ -3373,6 +3445,16 @@ click again to end selection No valid features in this document 於此檔中無有效特徵 + + + Please create a feature first. + Please create a feature first. + + + + Please select only one feature in an active body. + Please select only one feature in an active body. + Part creation failed @@ -4108,11 +4190,26 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Task Hole Parameters Task Hole Parameters + + + <b>Threading and size</b> + <b>Threading and size</b> + + + + Profile + 外觀 + Whether the hole gets a thread Whether the hole gets a thread + + + Threaded + Threaded + Whether the hole gets a modelled thread @@ -4156,6 +4253,26 @@ Note that the calculation can take some time Custom Thread clearance value Custom Thread clearance value + + + Direction + 方向 + + + + Right hand + Right hand + + + + Left hand + Left hand + + + + Size + 尺寸 + Hole clearance @@ -4182,16 +4299,44 @@ Only available for holes without thread Wide Wide + + + Class + Class + Tolerance class for threaded holes according to hole profile Tolerance class for threaded holes according to hole profile + + + + Diameter + 直徑 + Hole diameter Hole diameter + + + + Depth + Depth + + + + + Dimension + 標註 + + + + Through all + 完全貫穿 + Thread Depth @@ -4207,12 +4352,74 @@ Only available for holes without thread Tapped (DIN76) Tapped (DIN76) + + + <b>Hole cut</b> + <b>Hole cut</b> + Type 類型 + + + Cut type for screw heads + Cut type for screw heads + + + + Check to override the values predefined by the 'Type' + Check to override the values predefined by the 'Type' + + + + Custom values + Custom values + + + + Countersink angle + Countersink angle + + + + <b>Drill point</b> + <b>Drill point</b> + + + + Flat + Flat + + + + Angled + Angled + + + + The size of the drill point will be taken into +account for the depth of blind holes + The size of the drill point will be taken into +account for the depth of blind holes + + + + Take into account for depth + Take into account for depth + + + + <b>Misc</b> + <b>Misc</b> + + + + Tapered + Tapered + Taper angle for the hole @@ -4234,131 +4441,6 @@ over 90: larger hole radius at the bottom Reversed 反轉 - - - - Diameter - 直徑 - - - - - Depth - Depth - - - - Class - Class - - - - Cut type for screw heads - Cut type for screw heads - - - - Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' - - - - Custom values - Custom values - - - - The size of the drill point will be taken into -account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes - - - - Take into account for depth - Take into account for depth - - - - Tapered - Tapered - - - - Direction - 方向 - - - - Flat - Flat - - - - Angled - Angled - - - - Right hand - Right hand - - - - Left hand - Left hand - - - - Threaded - Threaded - - - - Profile - 外觀 - - - - Countersink angle - Countersink angle - - - - - Dimension - 標註 - - - - Through all - 完全貫穿 - - - - Size - 尺寸 - - - - <b>Drill point</b> - <b>Drill point</b> - - - - <b>Misc</b> - <b>Misc</b> - - - - <b>Hole cut</b> - <b>Hole cut</b> - - - - <b>Threading and size</b> - <b>Threading and size</b> - Normal @@ -4385,16 +4467,16 @@ account for the depth of blind holes Workbench - - - &Part Design - &Part Design - &Sketch &Sketch + + + &Part Design + &Part Design + Create a datum diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.qm b/src/Mod/Path/Gui/Resources/translations/Path_af.qm index a4f13d25d1..78be2f3870 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_af.qm and b/src/Mod/Path/Gui/Resources/translations/Path_af.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.ts b/src/Mod/Path/Gui/Resources/translations/Path_af.ts index 5bf25e50c3..126e1c46b9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_af.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_af.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm index 88e5627c51..06c986c29a 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ar.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ar.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts index d1bab2336e..4148021fa5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. + + + The library to use to generate the path + المكتبة ليتم استخدامها لتوليد المسار + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - المكتبة ليتم استخدامها لتوليد المسار + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object المرجو اختيار عنصر مسار + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + العنصر الذي قمت باختياره ليس عبارة عن مسار + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - العنصر الذي قمت باختياره ليس عبارة عن مسار - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm index cd5042fd86..ead9ba4e8e 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index d69a5dcb95..deebcb5918 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Les línies dropcutter es creen paral·leles a aquest eix. + + + The direction along which dropcutter lines are created + La direcció al llarg de la qual es creen les línies dropcutter + + + + Should the operation be limited by the stock object or by the bounding box of the base object + En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base + Additional offset to the selected bounding box Separació addicional a la caixa contenidora seleccionada + + + Step over percentage of the drop cutter path + Pas sobre el percentatge de la trajectòria del dropcutter + + + + Z-axis offset from the surface of the object + Separació de l'eix Z de la superfície de l'objecte + + + + The Sample Interval. Small values cause long wait times + L'interval de mostra. Els valors petits causen una llarga espera + + + + Enable optimization which removes unnecessary points from G-Code output + Activa l'optimització que suprimeixi els punts innecessaris del resultat G-Code + + + + The completion mode for the operation: single or multi-pass + Mode de compleció per a l'operació: únic o múltiples passos + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Inicia l'índex(angle) per a l'escàner rotacional + + + Ignore areas that proceed below specified depth. + Ignora les àrees que passen per davall d'una profunditat especificada. + + + + Depth used to identify waste areas to ignore. + Profunditat utilitzada per a identificar àmplies àrees a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Retalla els residus fins al fons en la vora del model, alliberant-lo. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The direction along which dropcutter lines are created - La direcció al llarg de la qual es creen les línies dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - - Step over percentage of the drop cutter path - Pas sobre el percentatge de la trajectòria del dropcutter - - - - Z-axis offset from the surface of the object - Separació de l'eix Z de la superfície de l'objecte - - - - The Sample Interval. Small values cause long wait times - L'interval de mostra. Els valors petits causen una llarga espera - - - - Enable optimization which removes unnecessary points from G-Code output - Activa l'optimització que suprimeixi els punts innecessaris del resultat G-Code - - - - The completion mode for the operation: single or multi-pass - Mode de compleció per a l'operació: únic o múltiples passos - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - - - - Ignore areas that proceed below specified depth. - Ignora les àrees que passen per davall d'una profunditat especificada. - - - - Depth used to identify waste areas to ignore. - Profunditat utilitzada per a identificar àmplies àrees a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Retalla els residus fins al fons en la vora del model, alliberant-lo. - - - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ S'ha incrementat fins al valor de dalt. La característica %s.%s no es pot processar com a forat circular; suprimiu-la de la llista de la geometria de base. - - Ignoring non-horizontal Face - S'ignora una Cara no horitzontal + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». @@ -1224,29 +1244,9 @@ S'ha incrementat fins al valor de dalt. Útils - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». + + Ignoring non-horizontal Face + S'ignora una Cara no horitzontal @@ -1380,6 +1380,19 @@ S'ha incrementat fins al valor de dalt. no s'ha trobat cap tasca per a op %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1978,6 +1991,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma de Buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares + Normal @@ -2028,16 +2051,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma de Buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares - 3D Pocket @@ -3448,16 +3461,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3475,6 +3478,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3947,6 +3960,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3962,12 +3981,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4294,6 +4307,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Minimum Z Height Alçada mínima de Z + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + Maximum Z Height @@ -4464,11 +4482,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Date Data - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4624,6 +4637,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4634,11 +4652,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afegeix un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4665,6 +4678,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Crea una línia central de gravat + + + VCarve requires an engraving cutter with CuttingEdgeAngle + L'eina de gravat en V necessita una +punta de tall amb «CuttingEdgeAngle» + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4675,12 +4694,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. L'angle de la punta de tall del gravador ha de ser < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - L'eina de gravat en V necessita una -punta de tall amb «CuttingEdgeAngle» - Path_Waterline @@ -4715,11 +4728,56 @@ punta de tall amb «CuttingEdgeAngle» Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afegeix una taula d'eines nova + + + + Delete Selected Tool Table + Esborra la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4930,11 +4988,6 @@ punta de tall amb «CuttingEdgeAngle» Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4950,46 +5003,6 @@ punta de tall amb «CuttingEdgeAngle» Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afegeix una taula d'eines nova - - - - Delete Selected Tool Table - Esborra la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm index 70353a4089..0664ff742f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm and b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index b423eecc4a..9367102a66 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Řádky Dropcutter jsou vytvořeny paralelně s touto osou. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Pokud je operace omezena objektem polotovaru nebo ohraničeným objektem základního objektu + Additional offset to the selected bounding box Dodatečný ofset vybraného ohraničovacího kvádru + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Začít indexování (úhel) pro rotační skenování + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Cesta ke kopírování - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Knihovna použitá k vytvoření cesty + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Pokud je operace omezena objektem polotovaru nebo ohraničeným objektem základního objektu - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Knihovna použitá k vytvoření cesty + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Vybraný nástroj není vrták - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Zvýšeno na vrch polotovaru. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Zvýšeno na vrch polotovaru. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Zvýšeno na vrch polotovaru. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tvar kapsy + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Tvar kapsy - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimální výška Z + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Číslo nástroje pro načtení + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Číslo nástroje pro načtení - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Uložit knihovnu nástrojů + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otevřít tabulku nástrojů + + + Save tooltable + Uložit tabulku nástrojů + + + + Rename Tooltable + Přejmenovat tabulku nástrojů + + + + Enter Name: + Zadejte jméno: + + + + Add New Tool Table + Přidat novou tabulku nástrojů + + + + Delete Selected Tool Table + Odstranit vybranou tabulku nástrojů + + + + Rename Selected Tool Table + Přejmenovat vybranou tabulku nástrojů + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabulka nástrojů XML (*.xml);;;Tabulka nástrojů HeeksCAD (*.tooltable) - - - Save tooltable - Uložit tabulku nástrojů - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Přejmenovat tabulku nástrojů - - - - Enter Name: - Zadejte jméno: - - - - Add New Tool Table - Přidat novou tabulku nástrojů - - - - Delete Selected Tool Table - Odstranit vybranou tabulku nástrojů - - - - Rename Selected Tool Table - Přejmenovat vybranou tabulku nástrojů - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.qm b/src/Mod/Path/Gui/Resources/translations/Path_de.qm index 824e044b6b..7746c2645e 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_de.qm and b/src/Mod/Path/Gui/Resources/translations/Path_de.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index 57a7b9913a..83bf830fab 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Die Dropcutter-Linien werden parallel zu dieser Achse erstellt. + + + The direction along which dropcutter lines are created + Die Richtung, entlang der Drop-Cutter Bahnen erstellt werden + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Soll die Operation durch das Grundobjekt oder durch die Begrenzungsbox des Basisobjekts eingeschränkt werden + Additional offset to the selected bounding box Zusätzlicher Versatz zur ausgewählten Begrenzungsbox + + + Step over percentage of the drop cutter path + Überlappung des Drop-Cutter Pfads in Prozent + + + + Z-axis offset from the surface of the object + Z-Achsenversatz von der Oberfläche des Objekts + + + + The Sample Interval. Small values cause long wait times + Das Abtastintervall. Kleine Werte führen zu langer Wartezeit + + + + Enable optimization which removes unnecessary points from G-Code output + Aktivieren Sie die Optimierung, um unnötige Punkte aus der G-Code-Ausgabe zu entfernen + + + + The completion mode for the operation: single or multi-pass + Der Vervollständigungsmodus für die Operation: einfach oder mehrfach + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start-Index(Winkel) für Rotationssuche + + + Ignore areas that proceed below specified depth. + Ignoriere Bereiche, die unterhalb der angegebenen Tiefe fortfahren. + + + + Depth used to identify waste areas to ignore. + Tiefe zum Ermitteln von überschüssigen Flächen, um diese auszulassen. + + + + Cut through waste to depth at model edge, releasing the model. + Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Der zu kopierende Pfad - - - The base geometry of this toolpath - Die Basis-Geometrie dieses Werkzeugweges - The tool controller that will be used to calculate the path @@ -510,6 +560,11 @@ nur unwesentlich. Extra offset to apply to the operation. Direction is operation dependent. Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. + + + The library to use to generate the path + Algorithmus zum berechnen des Werkzeugweges + Start pocketing at center or boundary @@ -651,64 +706,9 @@ nur unwesentlich. Auf Wahr setzen, wenn die Fräser-Radiuskompensation verwendet werden soll - - The direction along which dropcutter lines are created - Die Richtung, entlang der Drop-Cutter Bahnen erstellt werden - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Soll die Operation durch das Grundobjekt oder durch die Begrenzungsbox des Basisobjekts eingeschränkt werden - - - - Step over percentage of the drop cutter path - Überlappung des Drop-Cutter Pfads in Prozent - - - - Z-axis offset from the surface of the object - Z-Achsenversatz von der Oberfläche des Objekts - - - - The Sample Interval. Small values cause long wait times - Das Abtastintervall. Kleine Werte führen zu langer Wartezeit - - - - Enable optimization which removes unnecessary points from G-Code output - Aktivieren Sie die Optimierung, um unnötige Punkte aus der G-Code-Ausgabe zu entfernen - - - - The completion mode for the operation: single or multi-pass - Der Vervollständigungsmodus für die Operation: einfach oder mehrfach - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) - - - - Ignore areas that proceed below specified depth. - Ignoriere Bereiche, die unterhalb der angegebenen Tiefe fortfahren. - - - - Depth used to identify waste areas to ignore. - Tiefe zum Ermitteln von überschüssigen Flächen, um diese auszulassen. - - - - Cut through waste to depth at model edge, releasing the model. - Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. - - - - The library to use to generate the path - Algorithmus zum berechnen des Werkzeugweges + + The base geometry of this toolpath + Die Basis-Geometrie dieses Werkzeugweges @@ -988,16 +988,16 @@ nur unwesentlich. Selected tool is not a drill Ausgewähltes Werkzeug ist kein Bohrer - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ungültiger Schneidenwinkel %.2f muß < 90° und > = 0° sein + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1156,9 +1156,29 @@ Wurde auf Grundkörperoberseite erhöht. Funktion %s.%s lässt sich nicht als ein kreisrundes Loch verarbeiten - bitte aus der Basisgeometrie-Liste entfernen. - - Ignoring non-horizontal Face - Benutzt nur Horizontale Flächen oder Kanten + + Face appears misaligned after initial rotation. + Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. + + + + Multiple faces in Base Geometry. + Mehrere Oberflächen in der Basisgeometrie. + + + + Depth settings will be applied to all faces. + Tiefeneinstellungen werden auf alle Teilflächen angewendet. + + + + EnableRotation property is 'Off'. + Die Eigenschaft "Rotation zulassen" ist deaktiviert. @@ -1226,29 +1246,9 @@ Wurde auf Grundkörperoberseite erhöht. Werkzeuge - - Face appears misaligned after initial rotation. - Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. - - - - Multiple faces in Base Geometry. - Mehrere Oberflächen in der Basisgeometrie. - - - - Depth settings will be applied to all faces. - Tiefeneinstellungen werden auf alle Teilflächen angewendet. - - - - EnableRotation property is 'Off'. - Die Eigenschaft "Rotation zulassen" ist deaktiviert. + + Ignoring non-horizontal Face + Benutzt nur Horizontale Flächen oder Kanten @@ -1383,6 +1383,19 @@ Wurde auf Grundkörperoberseite erhöht. Kein Job zur Operation %s gefunden. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Anordnungen von Bewegungsbahnen mit unterschiedlichen Werkzeugsteuerungen werden entsprechend der Werkzeugsteuerung der ersten Bewegungsbahn behandelt. + + PathCustom @@ -1981,6 +1994,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathPocket + + + Pocket Shape + Taschenform + + + + Creates a Path Pocket object from a face or faces + Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen + Normal @@ -2031,16 +2054,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Final depth set below ZMin of face(s) selected. Gesamttiefe unter ZMin von Fläche(n) ausgewählt. - - - Pocket Shape - Taschenform - - - - Creates a Path Pocket object from a face or faces - Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen - 3D Pocket @@ -3454,16 +3467,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Dressup - - - Dress-up - Erweiterung - - - - Creates a Path Dess-up object from a selected path - Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn - Please select one path object @@ -3483,6 +3486,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Please select a Path object Bitte wählen Sie ein Pfadobjekt + + + Dress-up + Erweiterung + + + + Creates a Path Dess-up object from a selected path + Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn + Path_DressupAxisMap @@ -3955,6 +3968,13 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Hop object Erzeugt ein Bewegungsbahn Sprung Objekt + + + The selected object is not a path + + Das ausgewählte Objekt ist keine Bewegungsbahn + + Please select one path object @@ -3970,13 +3990,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Hop Erzeuge Sprung - - - The selected object is not a path - - Das ausgewählte Objekt ist keine Bewegungsbahn - - Path_Inspect @@ -4306,6 +4319,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Minimum Z Height Minimale Z-Höhe + + + The Job has no selected Base object. + Dem Job wurde kein Basisobjekt zugeordnet. + Maximum Z Height @@ -4476,11 +4494,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Date Datum - - - The Job has no selected Base object. - Dem Job wurde kein Basisobjekt zugeordnet. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4636,6 +4649,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_ToolController + + + Tool Number to Load + Lade Werkzeugnummer + Add Tool Controller to the Job @@ -4646,11 +4664,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Add Tool Controller Werkzeug Kontroller bearbeiten - - - Tool Number to Load - Lade Werkzeugnummer - Path_ToolTable @@ -4677,6 +4690,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a medial line engraving path Erstellt einen medialen Liniengravurpfad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4687,11 +4705,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Engraver Cutting Edge Angle must be < 180 degrees. Gravur Schneitkantenwinkel muss < 180 Grad sein. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel - Path_Waterline @@ -4726,11 +4739,56 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Save toolbit library Werkzeugbibliothek speichern + + + Tooltable JSON (*.json) + Werkzeugtabelle JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Werkzeugtabelle (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Werkzeugtabelle (*.tbl) + Open tooltable Werkzeugtabelle öffnen + + + Save tooltable + Werkzeugtabelle speichern + + + + Rename Tooltable + Werkzeugtabelle umbenennen + + + + Enter Name: + Name eingeben: + + + + Add New Tool Table + Neue Werkzeugtabelle hinzufügen + + + + Delete Selected Tool Table + Ausgewählte Werkzeugtabelle löschen + + + + Rename Selected Tool Table + Ausgewählte Werkzeugtabelle umbenennen + Tooltable editor @@ -4941,11 +4999,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Werkzeugtabelle XML (XML); HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Werkzeugtabelle speichern - Tooltable XML (*.xml) @@ -4961,46 +5014,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Object doesn't have a tooltable property Objekt besitzt keine Eigenschaft "Werkzeugtabelle" - - - Rename Tooltable - Werkzeugtabelle umbenennen - - - - Enter Name: - Name eingeben: - - - - Add New Tool Table - Neue Werkzeugtabelle hinzufügen - - - - Delete Selected Tool Table - Ausgewählte Werkzeugtabelle löschen - - - - Rename Selected Tool Table - Ausgewählte Werkzeugtabelle umbenennen - - - - Tooltable JSON (*.json) - Werkzeugtabelle JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Werkzeugtabelle (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Werkzeugtabelle (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.qm b/src/Mod/Path/Gui/Resources/translations/Path_el.qm index edb89ae637..bfa5906d7a 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_el.qm and b/src/Mod/Path/Gui/Resources/translations/Path_el.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index 69c142e7d8..ec8b35afce 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + Το Διάστημα Δειγματοληψίας. Η χρήση μικρών τιμών επιφέρει μεγάλους χρόνους αναμονής + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Η διαδρομή προς αντιγραφή - - - The base geometry of this toolpath - Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. + + + The library to use to generate the path + Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - Το Διάστημα Δειγματοληψίας. Η χρήση μικρών τιμών επιφέρει μεγάλους χρόνους αναμονής - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + + The base geometry of this toolpath + Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Μη Έγκυρη Γωνία Περικοπής Ακμής %.2f, πρέπει να είναι <90° και >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Το χαρακτηριστικό %s.%s δεν δύναται να υποστεί επεξεργασία ως κυκλική οπή - παρακαλώ αφαιρέστε το από την λίστα γεωμετρίας Βάσης. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. δεν βρέθηκε εργασία για την λειτουργία %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Σχήμα Εσοχής + + + + Creates a Path Pocket object from a face or faces + Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Σχήμα Εσοχής - - - - Creates a Path Pocket object from a face or faces - Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Αναδιαμόρφωση - - - - Creates a Path Dess-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής + + + Dress-up + Αναδιαμόρφωση + + + + Creates a Path Dess-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Δημιουργεί μια Διαδρομή Άλματος + + + The selected object is not a path + + Το επιλεγμένο αντικείμενο δεν είναι διαδρομή + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Δημιουργήστε Άλμα - - - The selected object is not a path - - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Αριθμός Εργαλείου προς Φόρτωση + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Προσθέστε Ελεγκτή Εργαλείων - - - Tool Number to Load - Αριθμός Εργαλείου προς Φόρτωση - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Πίνακας εργαλείων JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Πίνακας εργαλείων HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Πίνακας εργαλείων LinuxCNC (*.tbl) + Open tooltable Άνοιγμα πίνακα εργαλείων + + + Save tooltable + Αποθήκευση πίνακα εργαλείων + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Πίνακας εργαλείων XML (*.xml);; Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - Save tooltable - Αποθήκευση πίνακα εργαλείων - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Το αντικείμενο δεν έχει κάποια ιδιότητα πίνακα εργαλείων - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Πίνακας εργαλείων JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Πίνακας εργαλείων LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm index 1811fbc3ac..90581e5b79 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 05b5214a65..93cbf40a3a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Las líneas de corte se crean paralelas a este eje. + + + The direction along which dropcutter lines are created + La dirección a lo largo de la cual se crean las líneas del dropcutter + + + + Should the operation be limited by the stock object or by the bounding box of the base object + En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base + Additional offset to the selected bounding box Desplazamiento adicional al cuadro delimitador seleccionado + + + Step over percentage of the drop cutter path + Paso sobre el porcentaje de la trayectoria del dropcutter + + + + Z-axis offset from the surface of the object + Desplazamiento del eje Z desde la superficie del objeto + + + + The Sample Interval. Small values cause long wait times + El intervalo de muestra. Valores pequeños causan tiempos de espera largos + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code + + + + The completion mode for the operation: single or multi-pass + El modo de finalización para la operación: single o multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Iniciar índice(ángulo) para el escaneo rotativo + + + Ignore areas that proceed below specified depth. + Ignore las áreas que proceden por debajo de la profundidad especificada. + + + + Depth used to identify waste areas to ignore. + Profundidad usada para identificar las áreas residuales a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied La trayectoria a ser copiada - - - The base geometry of this toolpath - La geometría base de esta trayectoria de herramienta - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. + + + The library to use to generate the path + La biblioteca a usar para generar la trayectoria + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Hacer verdadero, sí se utiliza la compensación de cortador de radio - - The direction along which dropcutter lines are created - La dirección a lo largo de la cual se crean las líneas del dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base - - - - Step over percentage of the drop cutter path - Paso sobre el porcentaje de la trayectoria del dropcutter - - - - Z-axis offset from the surface of the object - Desplazamiento del eje Z desde la superficie del objeto - - - - The Sample Interval. Small values cause long wait times - El intervalo de muestra. Valores pequeños causan tiempos de espera largos - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code - - - - The completion mode for the operation: single or multi-pass - El modo de finalización para la operación: single o multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) - - - - Ignore areas that proceed below specified depth. - Ignore las áreas que proceden por debajo de la profundidad especificada. - - - - Depth used to identify waste areas to ignore. - Profundidad usada para identificar las áreas residuales a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. - - - - The library to use to generate the path - La biblioteca a usar para generar la trayectoria + + The base geometry of this toolpath + La geometría base de esta trayectoria de herramienta @@ -986,16 +986,16 @@ Selected tool is not a drill La herramienta seleccionada no es un taladro - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Aumenta hasta el valor superior. %s.%s función no puede ser procesada como un agujero circular - por favor eliminar de la lista de Base de la geometría. - - Ignoring non-horizontal Face - Ignorar cara no horizontal + + Face appears misaligned after initial rotation. + La cara parece estar mal alineada después de la rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar la propiedad 'InverseAngle' y volver a calcular. + + + + Multiple faces in Base Geometry. + Multiples caras en Geometría Base. + + + + Depth settings will be applied to all faces. + La configuración de profundidad se aplicará a todas las caras. + + + + EnableRotation property is 'Off'. + La Propiedad ActivarRotacion es 'Off'. @@ -1224,29 +1244,9 @@ Aumenta hasta el valor superior. Utilidades - - Face appears misaligned after initial rotation. - La cara parece estar mal alineada después de la rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar la propiedad 'InverseAngle' y volver a calcular. - - - - Multiple faces in Base Geometry. - Multiples caras en Geometría Base. - - - - Depth settings will be applied to all faces. - La configuración de profundidad se aplicará a todas las caras. - - - - EnableRotation property is 'Off'. - La Propiedad ActivarRotacion es 'Off'. + + Ignoring non-horizontal Face + Ignorar cara no horizontal @@ -1382,6 +1382,19 @@ Aumenta hasta el valor superior. no hay trabajo para operación %s encontrada. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Las matrices de rutas con diferentes controladores de herramientas son manejadas de acuerdo al controlador de herramienta de la primera ruta. + + PathCustom @@ -1979,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de Vaciado + + + + Creates a Path Pocket object from a face or faces + Crea la trayectoria de un objeto de vaciado desde una cara o caras + Normal @@ -2029,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). - - - Pocket Shape - Forma de Vaciado - - - - Creates a Path Pocket object from a face or faces - Crea la trayectoria de un objeto de vaciado desde una cara o caras - 3D Pocket @@ -3460,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Disfrazar - - - - Creates a Path Dess-up object from a selected path - Crea un objeto Dress-up de ruta con la trayectoria seleccionada - Please select one path object @@ -3489,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor seleccione un objeto de trayectoria + + + Dress-up + Disfrazar + + + + Creates a Path Dess-up object from a selected path + Crea un objeto Dress-up de ruta con la trayectoria seleccionada + Path_DressupAxisMap @@ -3961,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objeto de salto de trayectoria + + + The selected object is not a path + + El objeto seleccionado no es una trayectoria + + Please select one path object @@ -3976,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crear Salto - - - The selected object is not a path - - El objeto seleccionado no es una trayectoria - - Path_Inspect @@ -4312,6 +4325,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altura mínima de Z + + + The Job has no selected Base object. + El trabajo no tiene objeto base seleccionado. + Maximum Z Height @@ -4482,11 +4500,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Fecha - - - The Job has no selected Base object. - El trabajo no tiene objeto base seleccionado. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número de herramienta a carga + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Añadir Controlador de Herramienta - - - Tool Number to Load - Número de herramienta a carga - Path_ToolTable @@ -4689,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea una ruta de grabado de línea medial + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requiere una cortadora de grabado con CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Angulo de borde de corte del grabador debe ser < 180 grados. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requiere una cortadora de grabado con CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Guardar librería "toolbit" + + + Tooltable JSON (*.json) + Tabla de herramientas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabla de herramientas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabla de herramientas LinuxCNC (*.tbl) + Open tooltable Abierta mesa de herramientas + + + Save tooltable + Guardar mesa de herramienta + + + + Rename Tooltable + Renombrar Tabla de Herramientas + + + + Enter Name: + Introducir nombre: + + + + Add New Tool Table + Añadir nueva tabla de herramientas + + + + Delete Selected Tool Table + Eliminar Tabla de Herramientas Seleccionada + + + + Rename Selected Tool Table + Renombrar Tabla de Herramientas Seleccionada + Tooltable editor @@ -4953,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) - - - Save tooltable - Guardar mesa de herramienta - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property El Objeto no tiene una propiedad de mesa de herramienta - - - Rename Tooltable - Renombrar Tabla de Herramientas - - - - Enter Name: - Introducir nombre: - - - - Add New Tool Table - Añadir nueva tabla de herramientas - - - - Delete Selected Tool Table - Eliminar Tabla de Herramientas Seleccionada - - - - Rename Selected Tool Table - Renombrar Tabla de Herramientas Seleccionada - - - - Tooltable JSON (*.json) - Tabla de herramientas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabla de herramientas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabla de herramientas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm index 842cb7dc2b..66ece6c802 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index 4443337f14..56fc56e3e1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Erortze-ebakigailuaren lerroak ardatz honen paraleloan sortzen dira. + + + The direction along which dropcutter lines are created + Erortze-ebakigailuaren lerroak zein norabidetan sortuko diren + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Eragiketa objektu gordinak ala oinarri-objektuaren muga-kutxak mugatuko duen + Additional offset to the selected bounding box Hautatutako muga-kutxaren desplazamendu gehigarria + + + Step over percentage of the drop cutter path + Erortze-ebakigailuaren bidearen ehunekoaren gaineko urratsa + + + + Z-axis offset from the surface of the object + Z ardatzeko desplazamendua objektuaren gainazaletik + + + + The Sample Interval. Small values cause long wait times + Laginketa-tartea. Balio txikiek itxarote-denbora luzeak eragiten dituzte + + + + Enable optimization which removes unnecessary points from G-Code output + Gaitu optimizazioa, beharrezkoak ez diren puntuak G-Code irteeratik kentzeko + + + + The completion mode for the operation: single or multi-pass + Eragiketa osatzeko modua: pasaldi bakarrean edo anitzetan + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Abiarazteko indizea (angelua) biraketa-eskaneatzerako + + + Ignore areas that proceed below specified depth. + Ezikusi adierazitako sakoneraren azpitik dauden areak. + + + + Depth used to identify waste areas to ignore. + Ezikusiko diren hondar-areak identifikatzeko erabiliko den sakonera. + + + + Cut through waste to depth at model edge, releasing the model. + Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Kopiatuko den bidea - - - The base geometry of this toolpath - Tresna-bide honen oinarri-geometria - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. + + + The library to use to generate the path + Bidea sortzeko erabiliko den liburutegia + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada - - The direction along which dropcutter lines are created - Erortze-ebakigailuaren lerroak zein norabidetan sortuko diren - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Eragiketa objektu gordinak ala oinarri-objektuaren muga-kutxak mugatuko duen - - - - Step over percentage of the drop cutter path - Erortze-ebakigailuaren bidearen ehunekoaren gaineko urratsa - - - - Z-axis offset from the surface of the object - Z ardatzeko desplazamendua objektuaren gainazaletik - - - - The Sample Interval. Small values cause long wait times - Laginketa-tartea. Balio txikiek itxarote-denbora luzeak eragiten dituzte - - - - Enable optimization which removes unnecessary points from G-Code output - Gaitu optimizazioa, beharrezkoak ez diren puntuak G-Code irteeratik kentzeko - - - - The completion mode for the operation: single or multi-pass - Eragiketa osatzeko modua: pasaldi bakarrean edo anitzetan - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka - - - - Ignore areas that proceed below specified depth. - Ezikusi adierazitako sakoneraren azpitik dauden areak. - - - - Depth used to identify waste areas to ignore. - Ezikusiko diren hondar-areak identifikatzeko erabiliko den sakonera. - - - - Cut through waste to depth at model edge, releasing the model. - Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. - - - - The library to use to generate the path - Bidea sortzeko erabiliko den liburutegia + + The base geometry of this toolpath + Tresna-bide honen oinarri-geometria @@ -986,16 +986,16 @@ Selected tool is not a drill Hautatutako tresna ez da zulagailua - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Mozte-ertzaren angelu baliogabea %.2f, izan behar du <90° eta >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Pieza gordinaren goialdera handitua. %s.%s elementua ezin da prozesatu zulo zirkular gisa - kendu oinarri-geometrien zerrendatik. - - Ignoring non-horizontal Face - Horizontala ez den aurpegiari ez ikusiarena egiten + + Face appears misaligned after initial rotation. + Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. + + + + Multiple faces in Base Geometry. + Aurpegi anitz oinarri-geometrian. + + + + Depth settings will be applied to all faces. + Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. + + + + EnableRotation property is 'Off'. + Biraketa gaitzeko propietatea desaktibatuta dago. @@ -1224,29 +1244,9 @@ Pieza gordinaren goialdera handitua. Utilitateak - - Face appears misaligned after initial rotation. - Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. - - - - Multiple faces in Base Geometry. - Aurpegi anitz oinarri-geometrian. - - - - Depth settings will be applied to all faces. - Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. - - - - EnableRotation property is 'Off'. - Biraketa gaitzeko propietatea desaktibatuta dago. + + Ignoring non-horizontal Face + Horizontala ez den aurpegiari ez ikusiarena egiten @@ -1381,6 +1381,19 @@ Pieza gordinaren goialdera handitua. ez da lanik aurkitu %s eragiketarako. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1532,22 +1545,22 @@ Pieza gordinaren goialdera handitua. Click to enable Extensions - Click to enable Extensions + Egin klik hedapenak gaitzeko Click to include Edges/Wires - Click to include Edges/Wires + Egin klik ertzak/alanbreak sartzeko Extensions enabled - Extensions enabled + Hedapenak gaituta daude Including Edges/Wires - Including Edges/Wires + Ertzak/alanbreak barne @@ -1977,6 +1990,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathPocket + + + Pocket Shape + Poltsa-forma + + + + Creates a Path Pocket object from a face or faces + Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik + Normal @@ -2027,16 +2050,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Final depth set below ZMin of face(s) selected. Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita. - - - Pocket Shape - Poltsa-forma - - - - Creates a Path Pocket object from a face or faces - Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - 3D Pocket @@ -3389,7 +3402,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates an array from selected path(s) - Creates an array from selected path(s) + Matrize bat sortzen du hautatutako bide(ar)ekin @@ -3458,16 +3471,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Dressup - - - Dress-up - Jantzi - - - - Creates a Path Dess-up object from a selected path - Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz - Please select one path object @@ -3487,6 +3490,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Please select a Path object Hautatu bide-objektu bat + + + Dress-up + Jantzi + + + + Creates a Path Dess-up object from a selected path + Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz + Path_DressupAxisMap @@ -3959,6 +3972,13 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Hop object Bide-jauziko objektu bat sortzen du + + + The selected object is not a path + + Hautatutako objektua ez da bide bat + + Please select one path object @@ -3974,13 +3994,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Hop Sortu jauzia - - - The selected object is not a path - - Hautatutako objektua ez da bide bat - - Path_Inspect @@ -4310,6 +4323,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Minimum Z Height Z altuera minimoa + + + The Job has no selected Base object. + Lanak ez du hautatutako oinarri-objekturik. + Maximum Z Height @@ -4480,11 +4498,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Date Data - - - The Job has no selected Base object. - Lanak ez du hautatutako oinarri-objekturik. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4646,6 +4659,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_ToolController + + + Tool Number to Load + Kargatuko den tresnaren zenbakia + Add Tool Controller to the Job @@ -4656,11 +4674,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Add Tool Controller Gehitu tresna-kontrolatzailea - - - Tool Number to Load - Kargatuko den tresnaren zenbakia - Path_ToolTable @@ -4687,6 +4700,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a medial line engraving path Erdiko lerroko grabatze-bide bat sortzen du + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4697,11 +4715,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Engraver Cutting Edge Angle must be < 180 degrees. Grabagailuaren mozte-ertzaren angeluak < 180 gradu izan behar du. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du - Path_Waterline @@ -4736,11 +4749,56 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Save toolbit library Gorde tresna-atalaren liburutegia + + + Tooltable JSON (*.json) + JSON tresna-mahaia (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tresna-mahaia (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tresna-mahaia (*.tbl) + Open tooltable Ireki tresna-mahaia + + + Save tooltable + Gorde tresna-mahaia + + + + Rename Tooltable + Aldatu tresna-mahaiaren izena + + + + Enter Name: + Sartu izena: + + + + Add New Tool Table + Gehitu tresna-mahai berria + + + + Delete Selected Tool Table + Ezabatu hautatutako tresna-mahaia + + + + Rename Selected Tool Table + Aldatu izena hautatutako taula-mahaiari + Tooltable editor @@ -4951,11 +5009,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) XML tresna-mahaia (*.xml);;HeeksCAD tresna-mahaia (*.tooltable) - - - Save tooltable - Gorde tresna-mahaia - Tooltable XML (*.xml) @@ -4971,46 +5024,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Object doesn't have a tooltable property Objektuak ez du tresna-mahai propietate bat - - - Rename Tooltable - Aldatu tresna-mahaiaren izena - - - - Enter Name: - Sartu izena: - - - - Add New Tool Table - Gehitu tresna-mahai berria - - - - Delete Selected Tool Table - Ezabatu hautatutako tresna-mahaia - - - - Rename Selected Tool Table - Aldatu izena hautatutako taula-mahaiari - - - - Tooltable JSON (*.json) - JSON tresna-mahaia (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tresna-mahaia (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tresna-mahaia (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm index 22320f6e30..a0b49aea8c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index e63d84893f..495261a5f9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Pudotusleikkurin-linjat luodaan rinnakkain tämän akselin kanssa. + + + The direction along which dropcutter lines are created + Suunta, jota pitkin pudotusleikkurin linjat luodaan + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Pitääkö toimintoa rajoittaa varaston kohteen mukaan vai peruskohteen rajaavan kehyksen mukaan + Additional offset to the selected bounding box Lisää siirtymä valittuun rajauskehykseen + + + Step over percentage of the drop cutter path + Pudotusleikkurin polun askeleen prosenttiosuus + + + + Z-axis offset from the surface of the object + Z akselin siirtymä kohteen pinnasta + + + + The Sample Interval. Small values cause long wait times + Näytteenoton väli. Pienet arvot aiheuttavat pitkiä odotusaikoja + + + + Enable optimization which removes unnecessary points from G-Code output + Ota käyttöön optimointi, joka poistaa tarpeettomat pisteet G-Code -ulostulosta + + + + The completion mode for the operation: single or multi-pass + Toiminnon valmistumistila: kertaalleen tai moninkertaisesti + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Suunta, mitä työkalupolun pitäisi kulkea osan ympärillä: kiipeillen (Myötäpäivään) tai tavanomaisen tapaan (Vastapäivään) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Aloitusindeksi(kulma) rotaatiokuvausta varten + + + Ignore areas that proceed below specified depth. + Älä huomioi määritetyn syvyyden alapuolella kulkevia alueita. + + + + Depth used to identify waste areas to ignore. + Syvyys, jolla tunnistetaan jätealueet, joita ei huomioida. + + + + Cut through waste to depth at model edge, releasing the model. + Leikkaa jätteen läpi syvyyteen mallireunassa, jolloin malli vapautuu. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - Suunta, jota pitkin pudotusleikkurin linjat luodaan - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Pitääkö toimintoa rajoittaa varaston kohteen mukaan vai peruskohteen rajaavan kehyksen mukaan - - - - Step over percentage of the drop cutter path - Pudotusleikkurin polun askeleen prosenttiosuus - - - - Z-axis offset from the surface of the object - Z akselin siirtymä kohteen pinnasta - - - - The Sample Interval. Small values cause long wait times - Näytteenoton väli. Pienet arvot aiheuttavat pitkiä odotusaikoja - - - - Enable optimization which removes unnecessary points from G-Code output - Ota käyttöön optimointi, joka poistaa tarpeettomat pisteet G-Code -ulostulosta - - - - The completion mode for the operation: single or multi-pass - Toiminnon valmistumistila: kertaalleen tai moninkertaisesti - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Suunta, mitä työkalupolun pitäisi kulkea osan ympärillä: kiipeillen (Myötäpäivään) tai tavanomaisen tapaan (Vastapäivään) - - - - Ignore areas that proceed below specified depth. - Älä huomioi määritetyn syvyyden alapuolella kulkevia alueita. - - - - Depth used to identify waste areas to ignore. - Syvyys, jolla tunnistetaan jätealueet, joita ei huomioida. - - - - Cut through waste to depth at model edge, releasing the model. - Leikkaa jätteen läpi syvyyteen mallireunassa, jolloin malli vapautuu. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Ladattavan työkalun numero + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Ladattavan työkalun numero - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm index caf1a5976a..e430a4a75c 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index cf79d8194c..553ad8b0f6 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Ang landas upang kopyahin - - - The base geometry of this toolpath - Ang base Heometría ng toolpath na ito - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. + + + The library to use to generate the path + Ang library na gagamitin para makabuo ng path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Ang library na gagamitin para makabuo ng path + + The base geometry of this toolpath + Ang base Heometría ng toolpath na ito @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Hindi valid na Cutting Edge Angle %.2f, dapat ay <90° at >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s ay hindi maproseso bilang circular hole - mangyaring alisin mula sa listahan ng Base geometry. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. walang job para sa op %s ang natagpuan. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hugis ng Bulsa + + + + Creates a Path Pocket object from a face or faces + Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hugis ng Bulsa - - - - Creates a Path Pocket object from a face or faces - Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Bihisan - - - - Creates a Path Dess-up object from a selected path - Lumilikha ng Path Dess-up object mula sa napiling path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Mangyaring pumili ng isang Path Object + + + Dress-up + Bihisan + + + + Creates a Path Dess-up object from a selected path + Lumilikha ng Path Dess-up object mula sa napiling path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Lumilikha ng Path Hop object + + + The selected object is not a path + + Ang napiling object ay hindi isang path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Lumikha ng Hop - - - The selected object is not a path - - Ang napiling object ay hindi isang path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numero ng tool na i-load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Magdagdag ng Controller ng Tool - - - Tool Number to Load - Numero ng tool na i-load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Buksan ang tooltable + + + Save tooltable + I-save ang tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - I-save ang tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Ang object ay walang tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm index d3b1433386..e14d62f648 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index bceb7e19c4..da5c43aa6e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Des lignes de découpe sont créées parallèlement à cet axe. + + + The direction along which dropcutter lines are created + La direction le long de laquelle les lignes de coupe sont créées + + + + Should the operation be limited by the stock object or by the bounding box of the base object + L'opération doit-elle être limitée par le brut ou par la boîte englobante de l'objet de base + Additional offset to the selected bounding box Décalage supplémentaire pour la boîte englobante selectionnée + + + Step over percentage of the drop cutter path + Dépasser le pourcentage de la trajectoire du cutte + + + + Z-axis offset from the surface of the object + Décalage de l'axe Z par rapport à la surface de l'objet + + + + The Sample Interval. Small values cause long wait times + L’intervalle d’échantillonnage. les valeurs faibles provoquent de l'attente + + + + Enable optimization which removes unnecessary points from G-Code output + Activer l'optimisation supprimant les points inutiles du G-Code + + + + The completion mode for the operation: single or multi-pass + Mode d’achèvement de l’opération : simple ou multi-passes + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Index(angle) de départ pour le balayage en rotation + + + Ignore areas that proceed below specified depth. + Ignorer les zones qui se trouvent sous la profondeur indiquée. + + + + Depth used to identify waste areas to ignore. + Profondeur utilisée pour identifier la zone de chute à ignorer. + + + + Cut through waste to depth at model edge, releasing the model. + Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Le chemin d'accès à copier - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. + + + The library to use to generate the path + La bibliothèque à utiliser pour générer la trajectoire + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Marquer « true » si vous utilisez une compensation de rayon de coupe - - The direction along which dropcutter lines are created - La direction le long de laquelle les lignes de coupe sont créées - - - - Should the operation be limited by the stock object or by the bounding box of the base object - L'opération doit-elle être limitée par le brut ou par la boîte englobante de l'objet de base - - - - Step over percentage of the drop cutter path - Dépasser le pourcentage de la trajectoire du cutte - - - - Z-axis offset from the surface of the object - Décalage de l'axe Z par rapport à la surface de l'objet - - - - The Sample Interval. Small values cause long wait times - L’intervalle d’échantillonnage. les valeurs faibles provoquent de l'attente - - - - Enable optimization which removes unnecessary points from G-Code output - Activer l'optimisation supprimant les points inutiles du G-Code - - - - The completion mode for the operation: single or multi-pass - Mode d’achèvement de l’opération : simple ou multi-passes - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) - - - - Ignore areas that proceed below specified depth. - Ignorer les zones qui se trouvent sous la profondeur indiquée. - - - - Depth used to identify waste areas to ignore. - Profondeur utilisée pour identifier la zone de chute à ignorer. - - - - Cut through waste to depth at model edge, releasing the model. - Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. - - - - The library to use to generate the path - La bibliothèque à utiliser pour générer la trajectoire + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil @@ -986,16 +986,16 @@ Selected tool is not a drill L’outil sélectionné n’est pas une perceuse - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angle d'arête de coupe invalide %.2f, doit être entre <90° et >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Augmenté au dessus du stock. La fonction %s.%s ne peut pas être traitée comme un trou circulaire - Retirez la de la liste de géométrie de Base . - - Ignoring non-horizontal Face - Ignorer les faces non horizontales + + Face appears misaligned after initial rotation. + La face semble mal alignée après la rotation initiale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Envisagez de basculer la propriété 'InverseAngle' et de recalculer. + + + + Multiple faces in Base Geometry. + Faces multiples dans la géométrie de base. + + + + Depth settings will be applied to all faces. + Les paramètres de profondeur seront appliqués à toutes les faces. + + + + EnableRotation property is 'Off'. + La propriété EnableRotation est 'Off'. @@ -1224,29 +1244,9 @@ Augmenté au dessus du stock. Utilitaires - - Face appears misaligned after initial rotation. - La face semble mal alignée après la rotation initiale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Envisagez de basculer la propriété 'InverseAngle' et de recalculer. - - - - Multiple faces in Base Geometry. - Faces multiples dans la géométrie de base. - - - - Depth settings will be applied to all faces. - Les paramètres de profondeur seront appliqués à toutes les faces. - - - - EnableRotation property is 'Off'. - La propriété EnableRotation est 'Off'. + + Ignoring non-horizontal Face + Ignorer les faces non horizontales @@ -1382,6 +1382,19 @@ Augmenté au dessus du stock. aucun tâche trouvée pour op " %s ". + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Les tableaux de parcours ayant différents contrôleurs d’outils sont gérés en fonction du contrôleur d’outils du premier parcours. + + PathCustom @@ -1980,6 +1993,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathPocket + + + Pocket Shape + Forme de poche + + + + Creates a Path Pocket object from a face or faces + Crée un objet poche à partir d'arêtes ou d'une surface + Normal @@ -2030,16 +2053,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Final depth set below ZMin of face(s) selected. Profondeur finale définie sous ZMin de face(s) sélectionnée(s). - - - Pocket Shape - Forme de poche - - - - Creates a Path Pocket object from a face or faces - Crée un objet poche à partir d'arêtes ou d'une surface - 3D Pocket @@ -3460,16 +3473,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Dressup - - - Dress-up - Trajectoire additionnelle - - - - Creates a Path Dess-up object from a selected path - Crée un objet trajectoire additionnel à partir d'un parcours sélectionné - Please select one path object @@ -3489,6 +3492,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Please select a Path object Veuillez sélectionner un object parcours + + + Dress-up + Trajectoire additionnelle + + + + Creates a Path Dess-up object from a selected path + Crée un objet trajectoire additionnel à partir d'un parcours sélectionné + Path_DressupAxisMap @@ -3961,6 +3974,13 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Hop object Crée un object saut + + + The selected object is not a path + + L'objet sélectionné n'est pas un parcours + + Please select one path object @@ -3976,13 +3996,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Hop Crée un saut - - - The selected object is not a path - - L'objet sélectionné n'est pas un parcours - - Path_Inspect @@ -4312,6 +4325,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Minimum Z Height Hauteur minimale de Z + + + The Job has no selected Base object. + La tâche n'a pas d'objet de Base sélectionné. + Maximum Z Height @@ -4482,11 +4500,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Date Date - - - The Job has no selected Base object. - La tâche n'a pas d'objet de Base sélectionné. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_ToolController + + + Tool Number to Load + Numéro d'outil à charger + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Add Tool Controller Ajouter un contrôleur d'outil - - - Tool Number to Load - Numéro d'outil à charger - Path_ToolTable @@ -4689,6 +4702,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a medial line engraving path Crée une ligne médiane de gravure + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve nécessite un outil de gravure avec angle de coupe + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Engraver Cutting Edge Angle must be < 180 degrees. L'angle de coupe du graveur doit être <180 degrés. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve nécessite un outil de gravure avec angle de coupe - Path_Waterline @@ -4738,11 +4751,56 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Save toolbit library Enregistrer la bibliothèque d'outils + + + Tooltable JSON (*.json) + Table d'outils JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Table d'outils HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Table d'outils LinuxCNC (*.tbl) + Open tooltable Ouvre la table des outils + + + Save tooltable + Enregistrer la table d'outils + + + + Rename Tooltable + Renommer la table d'outils + + + + Enter Name: + Saisir le nom : + + + + Add New Tool Table + Ajouter une nouvelle table d'outils + + + + Delete Selected Tool Table + Supprimer la table des outils sélectionnée + + + + Rename Selected Tool Table + Renommer la table des outils sélectionnée + Tooltable editor @@ -4953,11 +5011,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - - - Save tooltable - Enregistrer la table d'outils - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Object doesn't have a tooltable property L'objet ne possède pas de propriété d'outil pour être mis dans la table - - - Rename Tooltable - Renommer la table d'outils - - - - Enter Name: - Saisir le nom : - - - - Add New Tool Table - Ajouter une nouvelle table d'outils - - - - Delete Selected Tool Table - Supprimer la table des outils sélectionnée - - - - Rename Selected Tool Table - Renommer la table des outils sélectionnée - - - - Tooltable JSON (*.json) - Table d'outils JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Table d'outils HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Table d'outils LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm index 4445283fc2..4e47285cdf 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index 036c9bea06..07b0ce7cee 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + A dirección ao longo da cal se crean as liñas de dropcutter + + + + Should the operation be limited by the stock object or by the bounding box of the base object + No caso de que a operación estea limitada por obxecto stock ou por carcasa da base do obxecto + Additional offset to the selected bounding box Desprazamento engadido á escolma en carcasa + + + Step over percentage of the drop cutter path + Paso sobre porcentaxe da traxectoria de drop cutter + + + + Z-axis offset from the surface of the object + Z-eixo de desprazamento dende a superficie do obxecto + + + + The Sample Interval. Small values cause long wait times + Intervalo de mostra. Valores pequenos causan longas esperas + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar a optimización que elimina puntos innecesarios de saída dende G-Code + + + + The completion mode for the operation: single or multi-pass + O modo de completado para operación: sinxelo ou pase múltiple + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Iniciar índice (ángulo) para dixitalización rotacional + + + Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolan abaixo a profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de restos a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Tallar os restos na profundidade no bordo do modelo, liberando o modelo. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied A traxectoria a ser copiada - - - The base geometry of this toolpath - A xeometría base desta traxectoria de ferramenta - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a operación. A dirección é dependente da operación. + + + The library to use to generate the path + A libraría a usar para xerar a traxectoria + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Facer verdadeiro, se se usa a compensación de radio de ferramenta - - The direction along which dropcutter lines are created - A dirección ao longo da cal se crean as liñas de dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - No caso de que a operación estea limitada por obxecto stock ou por carcasa da base do obxecto - - - - Step over percentage of the drop cutter path - Paso sobre porcentaxe da traxectoria de drop cutter - - - - Z-axis offset from the surface of the object - Z-eixo de desprazamento dende a superficie do obxecto - - - - The Sample Interval. Small values cause long wait times - Intervalo de mostra. Valores pequenos causan longas esperas - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar a optimización que elimina puntos innecesarios de saída dende G-Code - - - - The completion mode for the operation: single or multi-pass - O modo de completado para operación: sinxelo ou pase múltiple - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignorar áreas que se desenrolan abaixo a profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de restos a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Tallar os restos na profundidade no bordo do modelo, liberando o modelo. - - - - The library to use to generate the path - A libraría a usar para xerar a traxectoria + + The base geometry of this toolpath + A xeometría base desta traxectoria de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ángulo de corte non válido %.2f, debe ser <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. A Característica %s.%s non pode ser procesada como un burato circular - por favor elimíneo da lista de xeometría base. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + A face aparece desaliñada despois da rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considera trocar ao ángulo inverso e volver computar. + + + + Multiple faces in Base Geometry. + Múltiples faces en Xeometría Base. + + + + Depth settings will be applied to all faces. + Os axustes de profundidade serán aplicados a tódalas faces. + + + + EnableRotation property is 'Off'. + A propiedade Activar Rotación está 'Desactivada'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - A face aparece desaliñada despois da rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considera trocar ao ángulo inverso e volver computar. - - - - Multiple faces in Base Geometry. - Múltiples faces en Xeometría Base. - - - - Depth settings will be applied to all faces. - Os axustes de profundidade serán aplicados a tódalas faces. - - - - EnableRotation property is 'Off'. - A propiedade Activar Rotación está 'Desactivada'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. ningún traballo para %s atopado. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathPocket + + + Pocket Shape + Forma Baleira + + + + Creates a Path Pocket object from a face or faces + Crea un obxecto Traxectoria baleiro dende unha face ou faces + Normal @@ -2030,16 +2053,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Baleira - - - - Creates a Path Pocket object from a face or faces - Crea un obxecto Traxectoria baleiro dende unha face ou faces - 3D Pocket @@ -3461,16 +3474,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Dressup - - - Dress-up - Aspecto - - - - Creates a Path Dess-up object from a selected path - Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada - Please select one path object @@ -3490,6 +3493,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Please select a Path object Por favor, escolme un obxecto traxectoria + + + Dress-up + Aspecto + + + + Creates a Path Dess-up object from a selected path + Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Hop object Crea un obxecto salto de traxectoria + + + The selected object is not a path + + O obxecto escollido non é unha traxectoria + + Please select one path object @@ -3977,13 +3997,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Hop Crear Salto - - - The selected object is not a path - - O obxecto escollido non é unha traxectoria - - Path_Inspect @@ -4313,6 +4326,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + O traballo non ten obxecto Base escolmado. + Maximum Z Height @@ -4483,11 +4501,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Date Date - - - The Job has no selected Base object. - O traballo non ten obxecto Base escolmado. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_ToolController + + + Tool Number to Load + Número de ferramenta a cargar + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Add Tool Controller Engadir Controlador de Ferramenta - - - Tool Number to Load - Número de ferramenta a cargar - Path_ToolTable @@ -4690,6 +4703,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Táboa de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Táboa de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Táboa de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir táboa de ferramentas + + + Save tooltable + Gardar táboa de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Táboa de ferramentas XML (*.xml);;táboa de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Gardar táboa de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Object doesn't have a tooltable property O obxecto non ten unha propiedade de táboa de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Táboa de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Táboa de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Táboa de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm index 4fcb84ecc0..db54f0081a 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 2bf598aaf3..e960789e86 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -29,11 +29,51 @@ Dropcutter lines are created parallel to this axis. Linije spuštajućeg (drop-cutter) glodala stvaraju se paralelno s ovom osi. + + + The direction along which dropcutter lines are created + Smjer duž kojeg se stvaraju linije spuštajućeg glodala (drop-cutter) + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Kako operaciju treba ograničiti, kroz objekt osnove ili granični okvir osnovnog objekta + Additional offset to the selected bounding box Dodatni pomak za odabrani granični okvir + + + Step over percentage of the drop cutter path + Preklapanje staza spuštajućeg glodala (drop-cutter) u postocima + + + + Z-axis offset from the surface of the object + Z-os pomak od površine objekta + + + + The Sample Interval. Small values cause long wait times + Interval uzorka. Male vrijednosti uzrokuju dugo čekanje + + + + Enable optimization which removes unnecessary points from G-Code output + Omogući optimizaciju koja uklanja nepotrebne točke iz izvoza G-Koda + + + + The completion mode for the operation: single or multi-pass + Način dovršetka operacije: jednostruki ili višeprolazni + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Smjer kojim alatna staza treba obilaziti dio: uspon (ClockWise) ili konvencionalni (CounterClockWise) + The model will be rotated around this axis. @@ -44,6 +84,21 @@ Start index(angle) for rotational scan Početni indeks (kut) za rotacijsko skeniranje + + + Ignore areas that proceed below specified depth. + Zanemarite područja koja se odvijaju ispod određene dubine. + + + + Depth used to identify waste areas to ignore. + Dubina koja se koristi za prepoznavanje područja odpadaka koje treba zanemariti. + + + + Cut through waste to depth at model edge, releasing the model. + Prerežite otpadak do dubine na rubu modela, oslobađajući model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -216,11 +271,6 @@ The path to be copied Put koji treba kopirati - - - The base geometry of this toolpath - Osnovna geometrija ove obrade staze - The tool controller that will be used to calculate the path @@ -563,6 +613,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji. + + + The library to use to generate the path + Biblioteka koja se koristiti za generiranje staze + Start pocketing at center or boundary @@ -708,64 +763,9 @@ Postavi na istinito, ako koristite kompenzaciju radijusa glodala - - The direction along which dropcutter lines are created - Smjer duž kojeg se stvaraju linije spuštajućeg glodala (drop-cutter) - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Kako operaciju treba ograničiti, kroz objekt osnove ili granični okvir osnovnog objekta - - - - Step over percentage of the drop cutter path - Preklapanje staza spuštajućeg glodala (drop-cutter) u postocima - - - - Z-axis offset from the surface of the object - Z-os pomak od površine objekta - - - - The Sample Interval. Small values cause long wait times - Interval uzorka. Male vrijednosti uzrokuju dugo čekanje - - - - Enable optimization which removes unnecessary points from G-Code output - Omogući optimizaciju koja uklanja nepotrebne točke iz izvoza G-Koda - - - - The completion mode for the operation: single or multi-pass - Način dovršetka operacije: jednostruki ili višeprolazni - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Smjer kojim alatna staza treba obilaziti dio: uspon (ClockWise) ili konvencionalni (CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Zanemarite područja koja se odvijaju ispod određene dubine. - - - - Depth used to identify waste areas to ignore. - Dubina koja se koristi za prepoznavanje područja odpadaka koje treba zanemariti. - - - - Cut through waste to depth at model edge, releasing the model. - Prerežite otpadak do dubine na rubu modela, oslobađajući model. - - - - The library to use to generate the path - Biblioteka koja se koristiti za generiranje staze + + The base geometry of this toolpath + Osnovna geometrija ove obrade staze @@ -1053,16 +1053,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Pogrešan rub rezanja kut %.2f, mora biti < 90 ° i > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1245,11 +1245,29 @@ Povećana na vrh osnove. Svojstvo %s.%s ne može se obraditi kao kružna rupa - uklonite je s popisa geometrija baze. - - Ignoring non-horizontal Face - Zanemaruje ne-vodoravno Lice - - + + Face appears misaligned after initial rotation. + Lice se čini pogrešno poravnano nakon početne rotacije. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. + + + + Multiple faces in Base Geometry. + Višestruka lica u Osnovnoj Geometriji. + + + + Depth settings will be applied to all faces. + Postavke dubine primijenit će se na sva lica. + + + + EnableRotation property is 'Off'. + Svojstvo Omogući Rotaciju je 'isključeno'. @@ -1319,29 +1337,11 @@ Povećana na vrh osnove. Utils - - Face appears misaligned after initial rotation. - Lice se čini pogrešno poravnano nakon početne rotacije. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. - - - - Multiple faces in Base Geometry. - Višestruka lica u Osnovnoj Geometriji. - - - - Depth settings will be applied to all faces. - Postavke dubine primijenit će se na sva lica. - - - - EnableRotation property is 'Off'. - Svojstvo Omogući Rotaciju je 'isključeno'. + + Ignoring non-horizontal Face + Zanemaruje ne-vodoravno Lice + + @@ -1483,6 +1483,19 @@ Povećana na vrh osnove. nema zadatka za operaciju %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -2099,6 +2112,16 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathPocket + + + Pocket Shape + Oblik Utora + + + + Creates a Path Pocket object from a face or faces + Stvara objekt staze utora iz površine ili površina lica + Normal @@ -2153,16 +2176,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr - - - Pocket Shape - Oblik Utora - - - - Creates a Path Pocket object from a face or faces - Stvara objekt staze utora iz površine ili površina lica - 3D Pocket @@ -3702,16 +3715,6 @@ zadana vrijednost = 10,0. Path_Dressup - - - Dress-up - Dress-up (Odjenuti) - - - - Creates a Path Dess-up object from a selected path - Stvara staza objekt Dress-up od odabrane staze - Please select one path object @@ -3731,6 +3734,16 @@ zadana vrijednost = 10,0. Please select a Path object Odaberite objekt staze + + + Dress-up + Dress-up (Odjenuti) + + + + Creates a Path Dess-up object from a selected path + Stvara staza objekt Dress-up od odabrane staze + Path_DressupAxisMap @@ -4209,6 +4222,13 @@ zadana vrijednost = 10,0. Creates a Path Hop object Stvori objekt prijelaza staze + + + The selected object is not a path + + Odabrani objekt nije putanja staze + + Please select one path object @@ -4224,13 +4244,6 @@ zadana vrijednost = 10,0. Create Hop Stvori prijelaz - - - The selected object is not a path - - Odabrani objekt nije putanja staze - - Path_Inspect @@ -4564,6 +4577,11 @@ zadana vrijednost = 10,0. Minimum Z Height Minimalna Z visina + + + The Job has no selected Base object. + Zadatak nema odabran osnovni objekt. + Maximum Z Height @@ -4738,11 +4756,6 @@ Broj linija Date Datum - - - The Job has no selected Base object. - Zadatak nema odabran osnovni objekt. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4910,6 +4923,11 @@ Broj linija Path_ToolController + + + Tool Number to Load + Broj alata koji se koristi + Add Tool Controller to the Job @@ -4920,11 +4938,6 @@ Broj linija Add Tool Controller Dodajte kontroler alata - - - Tool Number to Load - Broj alata koji se koristi - Path_ToolTable @@ -4951,6 +4964,14 @@ Broj linija Creates a medial line engraving path Stvara put gravure po medijalnoj crti + + + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve zahtijeva gravura rezač s +Kutom rezanja ruba + @@ -4963,14 +4984,6 @@ Broj linija Engraver Cutting Edge Angle must be < 180 degrees. Rezni kut ruba graviranja mora biti < 180 stupnjeva. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve zahtijeva gravura rezač s -Kutom rezanja ruba - - - Path_Waterline @@ -5007,11 +5020,56 @@ Kutom rezanja ruba Save toolbit library Spremi biblioteku nastavaka alata + + + Tooltable JSON (*.json) + Tabela alata JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Tabela alata (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Tabela alata (*.tbl) + Open tooltable Otvori tabelu alata + + + Save tooltable + Spremi tabelu alata + + + + Rename Tooltable + Preimenuj Tabelu Alata + + + + Enter Name: + Unesite ime: + + + + Add New Tool Table + Dodajte novu tablicu alata + + + + Delete Selected Tool Table + Izbriši odabranu tablicu alata + + + + Rename Selected Tool Table + Preimenuj odabranu tablicu alata + Tooltable editor @@ -5222,11 +5280,6 @@ Kutom rezanja ruba Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela alata XML (*.xml);;HeeksCAD tabela alata(*.tooltable) - - - Save tooltable - Spremi tabelu alata - Tooltable XML (*.xml) @@ -5242,46 +5295,6 @@ Kutom rezanja ruba Object doesn't have a tooltable property Objekt nema svojstvo alata stola - - - Rename Tooltable - Preimenuj Tabelu Alata - - - - Enter Name: - Unesite ime: - - - - Add New Tool Table - Dodajte novu tablicu alata - - - - Delete Selected Tool Table - Izbriši odabranu tablicu alata - - - - Rename Selected Tool Table - Preimenuj odabranu tablicu alata - - - - Tooltable JSON (*.json) - Tabela alata JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Tabela alata (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Tabela alata (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm index 4f8aad7296..442fa2b787 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index ba0ef7ba73..3d03ec0a22 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. A legördülő vonalak ezzel a tengelyekkel párhuzamosan jönnek létre. + + + The direction along which dropcutter lines are created + Az stancoló egyenesei mentén az irányok létrehozva + + + + Should the operation be limited by the stock object or by the bounding box of the base object + A műveletet korlátozza az alaptest állomány objektum vagy az alap objektum határolókerete + Additional offset to the selected bounding box További eltolás a kiválasztott határolókerethez + + + Step over percentage of the drop cutter path + Átléptetési százalék a stancoló útvonalán + + + + Z-axis offset from the surface of the object + Z-tengely eltolása a tárgy felületétől + + + + The Sample Interval. Small values cause long wait times + A Mintavételezési időköz. Kisebb értékek hosszú várakozást okoznak + + + + Enable optimization which removes unnecessary points from G-Code output + Engedélyezi az optimalizálást, amely eltávolítja a szükségtelen pontokat a G-kód kimenetéről + + + + The completion mode for the operation: single or multi-pass + A művelet befejezési módja: egy vagy több-áthaladású + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan A körforgó letapogatás kezdő indexe (szöge) + + + Ignore areas that proceed below specified depth. + Hagyja figyelmen kívül azokat a területeket, amelyek a megadott mélység alatt haladnak. + + + + Depth used to identify waste areas to ignore. + Hulladékterületek figyelmen kívül hagyáshoz használt mélység. + + + + Cut through waste to depth at model edge, releasing the model. + Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied A másolni kívánt szerszámpálya útvonal - - - The base geometry of this toolpath - Ennek a szerszámmozgásnak az alapgeometriája - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra eltolása a művelethez. Iránya a függ a művelettől. + + + The library to use to generate the path + Az elérési út létrehozásához használt könyvtár + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Állítsa igazra, ha sugár vágó kompenzációt alkalmaz - - The direction along which dropcutter lines are created - Az stancoló egyenesei mentén az irányok létrehozva - - - - Should the operation be limited by the stock object or by the bounding box of the base object - A műveletet korlátozza az alaptest állomány objektum vagy az alap objektum határolókerete - - - - Step over percentage of the drop cutter path - Átléptetési százalék a stancoló útvonalán - - - - Z-axis offset from the surface of the object - Z-tengely eltolása a tárgy felületétől - - - - The Sample Interval. Small values cause long wait times - A Mintavételezési időköz. Kisebb értékek hosszú várakozást okoznak - - - - Enable optimization which removes unnecessary points from G-Code output - Engedélyezi az optimalizálást, amely eltávolítja a szükségtelen pontokat a G-kód kimenetéről - - - - The completion mode for the operation: single or multi-pass - A művelet befejezési módja: egy vagy több-áthaladású - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) - - - - Ignore areas that proceed below specified depth. - Hagyja figyelmen kívül azokat a területeket, amelyek a megadott mélység alatt haladnak. - - - - Depth used to identify waste areas to ignore. - Hulladékterületek figyelmen kívül hagyáshoz használt mélység. - - - - Cut through waste to depth at model edge, releasing the model. - Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. - - - - The library to use to generate the path - Az elérési út létrehozásához használt könyvtár + + The base geometry of this toolpath + Ennek a szerszámmozgásnak az alapgeometriája @@ -986,16 +986,16 @@ Selected tool is not a drill A kijelölt eszköz nem fúró - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Érvénytelen forgácsoló él szög %.2f, <90° és >=0° közti kell + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Az alaptest tetejére emelve. A %s.%s funkciót nem lehet feldolgozni kör alakú mélyedésként - távolítsa el az alap geometriai listából. - - Ignoring non-horizontal Face - Nem vízszintes felület figyelmen kívül hagyása + + Face appears misaligned after initial rotation. + Az felületet a kezdeti forgatás után rosszul igazítja a program. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. + + + + Multiple faces in Base Geometry. + Többszörös felületek az alap geometriában. + + + + Depth settings will be applied to all faces. + A mélységbeállítás mindegyik felületre érvényes lesz. + + + + EnableRotation property is 'Off'. + Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. @@ -1224,29 +1244,9 @@ Az alaptest tetejére emelve. Munkaeszközök - - Face appears misaligned after initial rotation. - Az felületet a kezdeti forgatás után rosszul igazítja a program. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. - - - - Multiple faces in Base Geometry. - Többszörös felületek az alap geometriában. - - - - Depth settings will be applied to all faces. - A mélységbeállítás mindegyik felületre érvényes lesz. - - - - EnableRotation property is 'Off'. - Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. + + Ignoring non-horizontal Face + Nem vízszintes felület figyelmen kívül hagyása @@ -1382,6 +1382,19 @@ Az alaptest tetejére emelve. %s művelethez nem található feladat. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + A különböző szerszámvezérlővel rendelkező görbék tömbjeit az első elérési út szerszámvezérlője szerint kezeli. + + PathCustom @@ -1980,6 +1993,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathPocket + + + Pocket Shape + Zseb alakzat + + + + Creates a Path Pocket object from a face or faces + Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből + Normal @@ -2030,16 +2053,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Final depth set below ZMin of face(s) selected. A kiválasztott felület(ek) ZMin alatti végső mélysége. - - - Pocket Shape - Zseb alakzat - - - - Creates a Path Pocket object from a face or faces - Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből - 3D Pocket @@ -3463,16 +3476,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Dressup - - - Dress-up - Megváltoztatás - - - - Creates a Path Dess-up object from a selected path - Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból - Please select one path object @@ -3492,6 +3495,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Please select a Path object Kérem válasszon egy pályaútvonal objektumot + + + Dress-up + Megváltoztatás + + + + Creates a Path Dess-up object from a selected path + Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból + Path_DressupAxisMap @@ -3964,6 +3977,13 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Hop object Gyorsmenet beszúrása a visszahúzási síkra + + + The selected object is not a path + + A kijelölt objektum nem pálya útvonal + + Please select one path object @@ -3979,13 +3999,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Hop Visszahúzási útszakasz hozzáadása - - - The selected object is not a path - - A kijelölt objektum nem pálya útvonal - - Path_Inspect @@ -4315,6 +4328,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Minimum Z Height Minimális Z magasság + + + The Job has no selected Base object. + A feladatnak nincs kijelölt alap objektuma. + Maximum Z Height @@ -4485,11 +4503,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Date Dátum - - - The Job has no selected Base object. - A feladatnak nincs kijelölt alap objektuma. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4651,6 +4664,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_ToolController + + + Tool Number to Load + Betöltendő szerszám száma + Add Tool Controller to the Job @@ -4661,11 +4679,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Add Tool Controller Eszköz vezérlő hozzáadása - - - Tool Number to Load - Betöltendő szerszám száma - Path_ToolTable @@ -4692,6 +4705,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a medial line engraving path Középvonali gravírozási útvonal létrehozása + + + VCarve requires an engraving cutter with CuttingEdgeAngle + A V-kivágás gravírozást igényel vágás élvágási szöggel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4702,11 +4720,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Engraver Cutting Edge Angle must be < 180 degrees. A véső vágóélének szöge < 180 fok. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - A V-kivágás gravírozást igényel vágás élvágási szöggel - Path_Waterline @@ -4741,11 +4754,56 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Save toolbit library Szerszámkönyvtár mentése + + + Tooltable JSON (*.json) + Szerszámlista JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD szerszámlista (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC szerszámlista (*.tbl) + Open tooltable Szerszámlista megnyitása + + + Save tooltable + Szerszámlista mentése + + + + Rename Tooltable + Szerszámlista átnevezése + + + + Enter Name: + Nevezze el: + + + + Add New Tool Table + Új szerszámlista hozzáadása + + + + Delete Selected Tool Table + Kijelölt szerszámlista törlése + + + + Rename Selected Tool Table + A kijelölt szerszámlista átnevezése + Tooltable editor @@ -4956,11 +5014,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Szerszámlista XML (*.xml);; HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Szerszámlista mentése - Tooltable XML (*.xml) @@ -4976,46 +5029,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Object doesn't have a tooltable property Objektum nem rendelkezik szerszámlista tulajdonsággal - - - Rename Tooltable - Szerszámlista átnevezése - - - - Enter Name: - Nevezze el: - - - - Add New Tool Table - Új szerszámlista hozzáadása - - - - Delete Selected Tool Table - Kijelölt szerszámlista törlése - - - - Rename Selected Tool Table - A kijelölt szerszámlista átnevezése - - - - Tooltable JSON (*.json) - Szerszámlista JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD szerszámlista (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC szerszámlista (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.qm b/src/Mod/Path/Gui/Resources/translations/Path_id.qm index f86a791020..9fd19a2586 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_id.qm and b/src/Mod/Path/Gui/Resources/translations/Path_id.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 7f70966ed9..d4a3fe40e4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path yang akan disalin - - - The base geometry of this toolpath - Geometri dasar dari toolpath ini - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. + + + The library to use to generate the path + The perpustakaan untuk menggunakan untuk menghasilkan jalan + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The perpustakaan untuk menggunakan untuk menghasilkan jalan + + The base geometry of this toolpath + Geometri dasar dari toolpath ini @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Sudut Cutting Edge tidak benar%.2f, harus <90° dan>=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Fitur % s . % s tidak dapat diproses sebagai lubang melingkar - tolong hapus dari daftar geometri dasar. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1380,6 +1380,19 @@ Increased to stock top. tidak ada pekerjaan untuk op % s ditemukan + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1977,6 +1990,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2027,16 +2050,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3457,16 +3470,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Membuat Jalur Dess-up objek dari suatu dipilih jalan - Please select one path object @@ -3484,6 +3487,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Silahkan pilih objek Path + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Membuat Jalur Dess-up objek dari suatu dipilih jalan + Path_DressupAxisMap @@ -3956,6 +3969,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Membuat Jalur Hop objek + + + The selected object is not a path + + The dipilih objek bukan jalan + Please select one path object @@ -3971,12 +3990,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Buat Hop - - - The selected object is not a path - - The dipilih objek bukan jalan - Path_Inspect @@ -4307,6 +4320,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4477,11 +4495,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4641,6 +4654,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4651,11 +4669,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Tambahkan Alat Pengontrol - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4682,6 +4695,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4692,11 +4710,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4731,11 +4744,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tooltable LinuxCNC (*.tbl) + Open tooltable Buka tooltable + + + Save tooltable + Simpan tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4946,11 +5004,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (* .xml) ;, HeeksCAD tooltable (* .tooltable) - - - Save tooltable - Simpan tooltable - Tooltable XML (*.xml) @@ -4966,46 +5019,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objek tidak memiliki properti tooltable - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tooltable LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.qm b/src/Mod/Path/Gui/Resources/translations/Path_it.qm index 7e579c853c..3aa14d202f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_it.qm and b/src/Mod/Path/Gui/Resources/translations/Path_it.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 7788e3512c..19cf81eac5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Le linee di taglio sono create parallele a questo asse. + + + The direction along which dropcutter lines are created + La direzione lungo la quale vengono create le linee di taglio + + + + Should the operation be limited by the stock object or by the bounding box of the base object + L'operazione dovrebbe essere delimitata dall'oggetto grezzo o dal riquadro di delimitazione dell'oggetto di base + Additional offset to the selected bounding box Offset aggiuntivo al riquadro di selezione scelto + + + Step over percentage of the drop cutter path + Sovrascrivere la percentuale del percorso del cutter + + + + Z-axis offset from the surface of the object + Scostamento sull'asse Z dalla superficie dell'oggetto + + + + The Sample Interval. Small values cause long wait times + L'intervallo di campionamento. Piccoli valori causano lunghi tempi di attesa + + + + Enable optimization which removes unnecessary points from G-Code output + Abilita l'ottimizzazione che rimuove i punti non necessari dall'output G-Code + + + + The completion mode for the operation: single or multi-pass + La modalità di completamento per l'operazione: singolo o multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Avvia indice (angolo) per la scansione di rotazione + + + Ignore areas that proceed below specified depth. + Ignora le aree che sono al di sotto della profondità specificata. + + + + Depth used to identify waste areas to ignore. + Profondità utilizzata per identificare le aree di scarto da ignorare. + + + + Cut through waste to depth at model edge, releasing the model. + Taglia lo scarto alla profondità a bordo modello, liberando il modello. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Il percorso da copiare - - - The base geometry of this toolpath - La geometria di base del percorso di questo utensile - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. + + + The library to use to generate the path + La libreria da utilizzare per generare il percorso + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Rendere vero (True), se si utilizza la compensazione raggio utensile - - The direction along which dropcutter lines are created - La direzione lungo la quale vengono create le linee di taglio - - - - Should the operation be limited by the stock object or by the bounding box of the base object - L'operazione dovrebbe essere delimitata dall'oggetto grezzo o dal riquadro di delimitazione dell'oggetto di base - - - - Step over percentage of the drop cutter path - Sovrascrivere la percentuale del percorso del cutter - - - - Z-axis offset from the surface of the object - Scostamento sull'asse Z dalla superficie dell'oggetto - - - - The Sample Interval. Small values cause long wait times - L'intervallo di campionamento. Piccoli valori causano lunghi tempi di attesa - - - - Enable optimization which removes unnecessary points from G-Code output - Abilita l'ottimizzazione che rimuove i punti non necessari dall'output G-Code - - - - The completion mode for the operation: single or multi-pass - La modalità di completamento per l'operazione: singolo o multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario - - - - Ignore areas that proceed below specified depth. - Ignora le aree che sono al di sotto della profondità specificata. - - - - Depth used to identify waste areas to ignore. - Profondità utilizzata per identificare le aree di scarto da ignorare. - - - - Cut through waste to depth at model edge, releasing the model. - Taglia lo scarto alla profondità a bordo modello, liberando il modello. - - - - The library to use to generate the path - La libreria da utilizzare per generare il percorso + + The base geometry of this toolpath + La geometria di base del percorso di questo utensile @@ -986,16 +986,16 @@ Selected tool is not a drill L'utensile selezionato non è una punta di foratura - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angolo di taglio di %.2f invalido, deve essere compreso fra <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Aumentata fino all'altezza del pezzo grezzo. Il tratto %s.%s non può essere calcolato come un foro circolare - prego rimuoverlo dall'elenco della geometria di base. - - Ignoring non-horizontal Face - Ignora faccia non orizzontale + + Face appears misaligned after initial rotation. + La faccia appare disallineata dopo la rotazione iniziale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. + + + + Multiple faces in Base Geometry. + Più facce nella Geometria di base. + + + + Depth settings will be applied to all faces. + Le impostazioni di Profondità saranno applicate a tutte le facce. + + + + EnableRotation property is 'Off'. + La proprietà EnableRotation è 'Off'. @@ -1224,29 +1244,9 @@ Aumentata fino all'altezza del pezzo grezzo. Utilità - - Face appears misaligned after initial rotation. - La faccia appare disallineata dopo la rotazione iniziale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. - - - - Multiple faces in Base Geometry. - Più facce nella Geometria di base. - - - - Depth settings will be applied to all faces. - Le impostazioni di Profondità saranno applicate a tutte le facce. - - - - EnableRotation property is 'Off'. - La proprietà EnableRotation è 'Off'. + + Ignoring non-horizontal Face + Ignora faccia non orizzontale @@ -1382,6 +1382,19 @@ Aumentata fino all'altezza del pezzo grezzo. nessun lavoro trovato per op %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Array di percorsi con diversi controller di utensili sono gestiti secondo il controller di utensile del primo percorso. + + PathCustom @@ -1979,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tasca + + + + Creates a Path Pocket object from a face or faces + Crea un oggetto percorso Tasca da una o più facce + Normal @@ -2029,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profondità finale impostata sotto ZMin delle facce selezionate. - - - Pocket Shape - Tasca - - - - Creates a Path Pocket object from a face or faces - Crea un oggetto percorso Tasca da una o più facce - 3D Pocket @@ -3460,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Replica - - - - Creates a Path Dess-up object from a selected path - Crea un oggetto Replica modificabile del percorso selezionato - Please select one path object @@ -3489,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Si prega di selezionare un oggetto Percorso + + + Dress-up + Replica + + + + Creates a Path Dess-up object from a selected path + Crea un oggetto Replica modificabile del percorso selezionato + Path_DressupAxisMap @@ -3961,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un oggetto percorso Salto + + + The selected object is not a path + + L'oggetto selezionato non è un percorso + + Please select one path object @@ -3976,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crea Salto - - - The selected object is not a path - - L'oggetto selezionato non è un percorso - - Path_Inspect @@ -4312,6 +4325,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altezza Z Minima + + + The Job has no selected Base object. + La lavorazione non ha un oggetto base selezionato. + Maximum Z Height @@ -4482,11 +4500,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data - - - The Job has no selected Base object. - La lavorazione non ha un oggetto base selezionato. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Carica utensile + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Aggiungi un Controllo utensile - - - Tool Number to Load - Carica utensile - Path_ToolTable @@ -4689,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea un tracciato di incisione a linea mediale + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve richiede un cutter per incisione con Taglio Laterale Angolare + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. L'angolo di taglio del cutter per incisione deve essere < 180 gradi. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve richiede un cutter per incisione con Taglio Laterale Angolare - Path_Waterline @@ -4738,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Salva la libreria utensili + + + Tooltable JSON (*.json) + Tabella degli utensili JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabella degli utensili HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabella degli utensili LinuxCNC (*.tbl) + Open tooltable Apri la tabella utensili + + + Save tooltable + Salva la tabella utensili + + + + Rename Tooltable + Rinomina la tabella utensili + + + + Enter Name: + Inserire il nome: + + + + Add New Tool Table + Aggiungi nuova tabella utensili + + + + Delete Selected Tool Table + Elimina la tabella degli utensili selezionata + + + + Rename Selected Tool Table + Rinomina la tabella degli utensili selezionati + Tooltable editor @@ -4953,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabella utensili XML (XML); Tabella utensili HeeksCAD (*.tooltable) - - - Save tooltable - Salva la tabella utensili - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property L'oggetto non ha le proprietà necessarie per la tabella utensili - - - Rename Tooltable - Rinomina la tabella utensili - - - - Enter Name: - Inserire il nome: - - - - Add New Tool Table - Aggiungi nuova tabella utensili - - - - Delete Selected Tool Table - Elimina la tabella degli utensili selezionata - - - - Rename Selected Tool Table - Rinomina la tabella degli utensili selezionati - - - - Tooltable JSON (*.json) - Tabella degli utensili JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabella degli utensili HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabella degli utensili LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm index d50010819c..575ad70660 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 07ffade8e1..732ca62b8e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. ドロップカッターラインは、この軸と平行に作成されます。 + + + The direction along which dropcutter lines are created + ドロップカッター線を作成する方向 + + + + Should the operation be limited by the stock object or by the bounding box of the base object + この工程はストックオブジェクト、またはベースオブジェクトのバウンディングボックスによって制限を受けます + Additional offset to the selected bounding box 選択肢したバウンディングボックスへの追加オフセット + + + Step over percentage of the drop cutter path + ドロップカッターパスのステップオーバーのパーセント + + + + Z-axis offset from the surface of the object + オブジェクトのサーフェスからのZ軸オフセット + + + + The Sample Interval. Small values cause long wait times + サンプル間隔。 値を小さくすると処理時間が長くなります。 + + + + Enable optimization which removes unnecessary points from G-Code output + 最適化を有効に設定すると、G-Code出力から不必要な点を削除します + + + + The completion mode for the operation: single or multi-pass + 工程の終了モード: シングルまたはマルチパス + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + ツールパスが部品の周りを移動する時の方向: Climb（時計回り）または Conventional（反時計回り） + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan 回転スキャンの開始インデックス（角度） + + + Ignore areas that proceed below specified depth. + 指定された深さより下のエリアを無視。 + + + + Depth used to identify waste areas to ignore. + 無視される不要エリアを特定するための深さ + + + + Cut through waste to depth at model edge, releasing the model. + モデル端で最低部まで不要部を切り抜き、モデルを解放 + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied コピーするパス - - - The base geometry of this toolpath - このツールパスのベースジオメトリー - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. 工程に適用する追加オフセット。方向は工程に依存して変わります。 + + + The library to use to generate the path + パスの生成に使用するライブラリ + Start pocketing at center or boundary @@ -649,64 +704,9 @@ 工具径補正を使用する場合は True - - The direction along which dropcutter lines are created - ドロップカッター線を作成する方向 - - - - Should the operation be limited by the stock object or by the bounding box of the base object - この工程はストックオブジェクト、またはベースオブジェクトのバウンディングボックスによって制限を受けます - - - - Step over percentage of the drop cutter path - ドロップカッターパスのステップオーバーのパーセント - - - - Z-axis offset from the surface of the object - オブジェクトのサーフェスからのZ軸オフセット - - - - The Sample Interval. Small values cause long wait times - サンプル間隔。 値を小さくすると処理時間が長くなります。 - - - - Enable optimization which removes unnecessary points from G-Code output - 最適化を有効に設定すると、G-Code出力から不必要な点を削除します - - - - The completion mode for the operation: single or multi-pass - 工程の終了モード: シングルまたはマルチパス - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - ツールパスが部品の周りを移動する時の方向: Climb（時計回り）または Conventional（反時計回り） - - - - Ignore areas that proceed below specified depth. - 指定された深さより下のエリアを無視。 - - - - Depth used to identify waste areas to ignore. - 無視される不要エリアを特定するための深さ - - - - Cut through waste to depth at model edge, releasing the model. - モデル端で最低部まで不要部を切り抜き、モデルを解放 - - - - The library to use to generate the path - パスの生成に使用するライブラリ + + The base geometry of this toolpath + このツールパスのベースジオメトリー @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° %.2fは 無効な切れ刃角です。切れ刃角は <90° and >=0° でなければなりません + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. フィーチャー %s.%s は丸穴として処理できません。基本ジオメトリの一覧から削除してください - - Ignoring non-horizontal Face - 非水平面を無視 + + Face appears misaligned after initial rotation. + 初期回転後、面が不整状態になります。 + + + + Consider toggling the 'InverseAngle' property and recomputing. + 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 + + + + Multiple faces in Base Geometry. + ベースジオメトリーの複数面 + + + + Depth settings will be applied to all faces. + 深さの設定を全ての面に適用します + + + + EnableRotation property is 'Off'. + EnableRotation プロパティーが「オフ」になっています。 @@ -1224,29 +1244,9 @@ Increased to stock top. ユーティリティ - - Face appears misaligned after initial rotation. - 初期回転後、面が不整状態になります。 - - - - Consider toggling the 'InverseAngle' property and recomputing. - 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 - - - - Multiple faces in Base Geometry. - ベースジオメトリーの複数面 - - - - Depth settings will be applied to all faces. - 深さの設定を全ての面に適用します - - - - EnableRotation property is 'Off'. - EnableRotation プロパティーが「オフ」になっています。 + + Ignoring non-horizontal Face + 非水平面を無視 @@ -1382,6 +1382,19 @@ Increased to stock top. op %s のためのジョブが見つかりません。 + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathPocket + + + Pocket Shape + ポケット形状 + + + + Creates a Path Pocket object from a face or faces + 1面または複数面からパス・ポケット・オブジェクトを作成 + Normal @@ -2030,16 +2053,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - ポケット形状 - - - - Creates a Path Pocket object from a face or faces - 1面または複数面からパス・ポケット・オブジェクトを作成 - 3D Pocket @@ -3461,16 +3474,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Dressup - - - Dress-up - ドレスアップ - - - - Creates a Path Dess-up object from a selected path - 選択したパスからパス・ドレスアップ・オブジェクトを作成 - Please select one path object @@ -3490,6 +3493,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Please select a Path object パスオブジェクトを選択して下さい + + + Dress-up + ドレスアップ + + + + Creates a Path Dess-up object from a selected path + 選択したパスからパス・ドレスアップ・オブジェクトを作成 + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a Path Hop object パス・ホップ・オブジェクトを作成 + + + The selected object is not a path + + 選択されたオブジェクトはパスではありません + + Please select one path object @@ -3977,13 +3997,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Create Hop ホップを作成 - - - The selected object is not a path - - 選択されたオブジェクトはパスではありません - - Path_Inspect @@ -4313,6 +4326,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Minimum Z Height 最小Z高さ + + + The Job has no selected Base object. + ジョブに選択されたベース オブジェクトがありません。 + Maximum Z Height @@ -4483,11 +4501,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Date 日時 - - - The Job has no selected Base object. - ジョブに選択されたベース オブジェクトがありません。 - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_ToolController + + + Tool Number to Load + 読み込む工具番号 + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Add Tool Controller ツールコントローラーを追加 - - - Tool Number to Load - 読み込む工具番号 - Path_ToolTable @@ -4690,6 +4703,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Engraver Cutting Edge Angle must be < 180 degrees. 彫刻加工の切削エッジ角度は180度未満でなければなりません。 - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です - Path_Waterline @@ -4739,11 +4752,56 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Save toolbit library ツールビットのライブラリを保存 + + + Tooltable JSON (*.json) + ツールテーブル JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCADツールテーブル (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNCツールテーブル (*.tbl) + Open tooltable ツールテーブルを開く + + + Save tooltable + ツールテーブルを保存 + + + + Rename Tooltable + ツールテーブルの名前を変更 + + + + Enter Name: + 名前を入力: + + + + Add New Tool Table + 新しいツールテーブルを追加 + + + + Delete Selected Tool Table + 選択したツールテーブルを削除 + + + + Rename Selected Tool Table + 選択したツールテーブルの名前を変更 + Tooltable editor @@ -4954,11 +5012,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) ツールテーブルXML (*.xml);HeeksCADツールテーブル (*.tooltable) - - - Save tooltable - ツールテーブルを保存 - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Object doesn't have a tooltable property オブジェクトがツールテーブルプロパティを持っていません。 - - - Rename Tooltable - ツールテーブルの名前を変更 - - - - Enter Name: - 名前を入力: - - - - Add New Tool Table - 新しいツールテーブルを追加 - - - - Delete Selected Tool Table - 選択したツールテーブルを削除 - - - - Rename Selected Tool Table - 選択したツールテーブルの名前を変更 - - - - Tooltable JSON (*.json) - ツールテーブル JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCADツールテーブル (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNCツールテーブル (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm index baccd2be42..d18a3effde 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_kab.qm and b/src/Mod/Path/Gui/Resources/translations/Path_kab.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts index 9c207b7ecc..7e5bed79e0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Le chemin d'accès à copier - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Habillage - - - - Creates a Path Dess-up object from a selected path - Crée un habillage d'une trajectoire sélectionnée - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Veuillez sélectionner une trajectoire + + + Dress-up + Habillage + + + + Creates a Path Dess-up object from a selected path + Crée un habillage d'une trajectoire sélectionnée + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crée une trajectoire de saut + + + The selected object is not a path + + L'objet sélectionné n'est pas une trajectoire + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crée un saut - - - The selected object is not a path - - L'objet sélectionné n'est pas une trajectoire - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numéro d'outil à charger + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Numéro d'outil à charger - Path_ToolTable @@ -4689,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Ouvre la table des outils + + + Save tooltable + Enregistrer la table d'outils + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4953,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - - - Save tooltable - Enregistrer la table d'outils - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property L'objet ne possède pas de propriété d'outil pour être mis dans la table - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm index 9510e5eb6a..24ce2777be 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ko.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ko.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index e073d17d62..311096488e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -6,67 +6,122 @@ Show the temporary path construction objects when module is in DEBUG mode. - Show the temporary path construction objects when module is in DEBUG mode. + 모듈이 DEBUG 모드에 있을 때 임시 경로 구성 개체를 표시합니다. Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + 값이 작을수록 더 미세하고 정확한 메시가 생성됩니다. 값이 작을수록 처리 시간이 많이 늘어납니다. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + 값이 작을수록 더 미세하고 정확한 메시가 생성됩니다. 값이 작을수록 처리 시간이 많이 증가하지 않습니다. Stop index(angle) for rotational scan - Stop index(angle) for rotational scan + 회전 스캔을 위한 정지 인덱스(각도) Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. + Dropcutter 선은 이 축에 평행하게 생성됩니다. + + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object Additional offset to the selected bounding box - Additional offset to the selected bounding box + 선택한 경계 상자에 대한 추가 오프셋 + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) The model will be rotated around this axis. - The model will be rotated around this axis. + 모델은 이 축을 중심으로 회전합니다. Start index(angle) for rotational scan - Start index(angle) for rotational scan + 회전 스캔 시작 인덱스(각도) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + 평면: 평면, 3D 표면 스캔. 회전: 4축 회전 스캔. Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. - Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. + 선택한 면의 기본 지오메트리 목록에서 마지막 'N' 면을 자르지 마십시오. Do not cut internal features on avoided faces. - Do not cut internal features on avoided faces. + 피하는 면에서 내부 형상을 절단하지 마십시오. Positive values push the cutter toward, or beyond, the boundary. Negative values retract the cutter away from the boundary. - Positive values push the cutter toward, or beyond, the boundary. Negative values retract the cutter away from the boundary. + 양수 값은 커터를 경계 쪽으로 또는 경계 너머로 밀어냅니다. 음수 값은 경계에서 커터를 후퇴시킵니다. If true, the cutter will remain inside the boundaries of the model or selected face(s). - If true, the cutter will remain inside the boundaries of the model or selected face(s). + 사실인 경우 자르기는 모델 또는 선택한 경계면의 내부에 유지됩니다. @@ -76,107 +131,107 @@ Positive values push the cutter toward, or into, the feature. Negative values retract the cutter away from the feature. - Positive values push the cutter toward, or into, the feature. Negative values retract the cutter away from the feature. + 양수 값은 커터를 피쳐 쪽으로 또는 피쳐 안으로 밀어 넣습니다. 음수 값은 형상에서 커터를 후퇴시킵니다. Cut internal feature areas within a larger selected face. - Cut internal feature areas within a larger selected face. + 더 큰 선택된 면 내에서 내부 형상 영역을 자릅니다. Ignore internal feature areas within a larger selected face. - Ignore internal feature areas within a larger selected face. + 더 큰 선택된 면 내의 내부 특징 영역을 무시합니다. Select the overall boundary for the operation. - Select the overall boundary for the operation. + 작업의 전체 경계를 선택합니다. Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) - Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + 절단 도구가 재료와 맞물리는 방향을 설정하십시오: Climb(ClockWise) 또는 Conventional(CounterClockWise) Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. + 작업에 사용할 기하학적 지우기 패턴을 설정합니다. The yaw angle used for certain clearing patterns - The yaw angle used for certain clearing patterns + 특정 지우기 패턴에 사용되는 요 각도 Reverse the cut order of the stepover paths. For circular cut patterns, begin at the outside and work toward the center. - Reverse the cut order of the stepover paths. For circular cut patterns, begin at the outside and work toward the center. + 스텝오버 경로의 절단 순서를 반대로 합니다. 원형 절단 패턴의 경우 바깥쪽에서 시작하여 중앙을 향해 작업합니다. Set the Z-axis depth offset from the target surface. - Set the Z-axis depth offset from the target surface. + 대상 표면에서 Z축 깊이 오프셋을 설정합니다. Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. + 깊이에서 단일 패스로 작업을 완료하거나 최종 깊이까지 여러 패스로 작업을 완료합니다. Set the start point for the cut pattern. - Set the start point for the cut pattern. + 절단 패턴의 시작점을 설정합니다. Choose location of the center point for starting the cut pattern. - Choose location of the center point for starting the cut pattern. + 절단 패턴을 시작할 중심점의 위치를 ​​선택합니다. Profile the edges of the selection. - Profile the edges of the selection. + 선택 영역의 가장자리를 프로파일링합니다. Set the sampling resolution. Smaller values quickly increase processing time. - Set the sampling resolution. Smaller values quickly increase processing time. + 샘플링 해상도를 설정합니다. 값이 작을수록 처리 시간이 빠르게 늘어납니다. Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. + 도구의 지름을 기준으로 스텝오버 백분율을 설정합니다. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. - Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. + 선형 경로(동일 선형 점) 의 최적화를 활성화합니다. G-Code 출력에서 ​​불필요한 동일 선형 점을 제거합니다. Enable separate optimization of transitions between, and breaks within, each step over path. - Enable separate optimization of transitions between, and breaks within, each step over path. + 경로를 통한 각 단계 사이의 전환과 그 안에서의 중단을 개별적으로 최적화할 수 있습니다. Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. - Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. + 동일 평면 호를 `Circular` 및 `CircularZigZag` 절단 패턴에 대한 G2/G3 gcode 명령으로 변환합니다. Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. - Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. + 이 임계값보다 작은 동일선상 및 동일 방사상 아티팩트 간격은 경로에서 닫힙니다. Feedback: three smallest gaps identified in the path geometry. - Feedback: three smallest gaps identified in the path geometry. + 피드백: 경로 지오메트리에서 식별된 세 개의 가장 작은 간격. The custom start point for the path of this operation - The custom start point for the path of this operation + 이 작업의 경로에 대한 사용자 지정 시작점 @@ -188,15 +243,10 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path + 경로를 계산하는 데 사용할 도구 컨트롤러 @@ -206,17 +256,17 @@ Angles less than filter angle will not receive corner actions - Angles less than filter angle will not receive corner actions + 필터 각도보다 작은 각도는 코너 동작을 받지 않습니다. Distance the point trails behind the spindle - Distance the point trails behind the spindle + 스핀들 뒤의 포인트 트레일 거리 Height to raise during corner action - Height to raise during corner action + 코너 동작 중 올릴 높이 @@ -231,72 +281,72 @@ X offset between tool and probe - X offset between tool and probe + 도구와 프로브 사이의 X 오프셋 Y offset between tool and probe - Y offset between tool and probe + 도구와 프로브 사이의 Y 오프셋 Number of points to probe in X direction - Number of points to probe in X direction + X 방향으로 프로브할 포인트 수 Number of points to probe in Y direction - Number of points to probe in Y direction + Y 방향으로 프로브할 포인트 수 The output location for the probe data to be written - The output location for the probe data to be written + 기록할 프로브 데이터의 출력 위치 Calculate roll-on to path - Calculate roll-on to path + 경로에 대한 롤온 계산 Calculate roll-off from path - Calculate roll-off from path + 경로에서 롤오프 계산 Keep the Tool Down in Path - Keep the Tool Down in Path + 경로에서 도구를 아래로 유지 Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 - Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + 머신 커터 반경 보정/공구 경로 오프셋 G41/G42 사용 Length or Radius of the approach - Length or Radius of the approach + 접근의 길이 또는 반경 Extends LeadIn distance - Extends LeadIn distance + 리드인 거리 연장 Extends LeadOut distance - Extends LeadOut distance + LeadOut 거리 확장 Perform plunges with G0 - Perform plunges with G0 + G0으로 플런지 수행 Apply LeadInOut to layers within an operation - Apply LeadInOut to layers within an operation + 작업 내의 레이어에 LeadInOut 적용 @@ -311,12 +361,12 @@ Ramping Method - Ramping Method + 램핑 방법 Which feed rate to use for ramping - Which feed rate to use for ramping + 램핑에 사용할 이송 속도 @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1392,7 +1405,7 @@ Increased to stock top. The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path + 경로를 계산하는 데 사용할 도구 컨트롤러 @@ -1870,7 +1883,7 @@ Increased to stock top. The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path + 경로를 계산하는 데 사용할 도구 컨트롤러 @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2065,7 +2078,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Pocket - 생성: 돌출 컷(Pocket) + 돌출 컷 @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4115,7 +4128,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Pocket - 생성: 돌출 컷(Pocket) + 돌출 컷 @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable 도구목록 열기 + + + Save tooltable + 도구목록을 저장 + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) 도구목록 XML (*.xml); HeeksCAD 도구목록 (*.tooltable) - - - Save tooltable - 도구목록을 저장 - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property 개체가 도구목록 속성을 하지 않습니다. - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm index fa4b89fbcf..74980b9bc5 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm and b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index 14547767b5..2f0e9250ec 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1407,7 +1420,7 @@ Increased to stock top. The desired width of the chamfer - The desired width of the chamfer + Norimas nuožulos plotis @@ -1424,7 +1437,7 @@ Increased to stock top. How to join chamfer segments - How to join chamfer segments + Kaip sujungti nuožulų atkarpas @@ -1482,7 +1495,7 @@ Increased to stock top. Radius of the fillet for the tag. - Radius of the fillet for the tag. + Žymės suapvalinimo spindulys. @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3754,7 +3767,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. - Radius of the fillet for the tag. + Žymės suapvalinimo spindulys. @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4847,7 +4905,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Chamfer Mill - Chamfer Mill + Nuosklembos apdorojimas @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -5317,7 +5330,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of the fillet for the tag. - Radius of the fillet for the tag. + Žymės suapvalinimo spindulys. diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm index 3020bcd6fa..cd58830eb9 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index 59882dbac9..c00c2bd1e8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutterlijnen worden parallel gemaakt met deze as. + + + The direction along which dropcutter lines are created + De richting langs welke dropcutter lijnen worden gemaakt + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Moet de bewerking worden beperkt door het voorraadobject of door de begrenzingsdoos van het basisobject + Additional offset to the selected bounding box Extra verschuiving naar de geselecteerde begrenzingsdoos + + + Step over percentage of the drop cutter path + Stap over percentage van het drop cutter pad + + + + Z-axis offset from the surface of the object + Z-as verschuiving van het oppervlak van het object + + + + The Sample Interval. Small values cause long wait times + De Staalinterval. Kleine waarden veroorzaken lange wachttijden + + + + Enable optimization which removes unnecessary points from G-Code output + Optimalisatie inschakelen die onnodige punten verwijdert van de G-Code uitvoer + + + + The completion mode for the operation: single or multi-pass + De voltooiing modus voor de bewerking: één of meerdere-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + De richting die het tool moet volge rond het werkstuk: Climb(met de klok mee) of conventioneel(tegen de klok) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(hoek) voor rotationele scan + + + Ignore areas that proceed below specified depth. + Negeer gebieden die onder de opgegeven diepte gaan. + + + + Depth used to identify waste areas to ignore. + Diepte die gebruikt werd om de te negeren afvalgebieden te identificeren. + + + + Cut through waste to depth at model edge, releasing the model. + Ga door afval naar diepte aan de modelrand, waardoor het model vrijkomt. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Het te kopiëren pad - - - The base geometry of this toolpath - De basisgeometrie voor dit gereedschapspad - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking. + + + The library to use to generate the path + De te bibliotheek gebruiken voor het genereren van het pad + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Zet Waar indien u gebruik maakt van de straalcompensatie van de snijder - - The direction along which dropcutter lines are created - De richting langs welke dropcutter lijnen worden gemaakt - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Moet de bewerking worden beperkt door het voorraadobject of door de begrenzingsdoos van het basisobject - - - - Step over percentage of the drop cutter path - Stap over percentage van het drop cutter pad - - - - Z-axis offset from the surface of the object - Z-as verschuiving van het oppervlak van het object - - - - The Sample Interval. Small values cause long wait times - De Staalinterval. Kleine waarden veroorzaken lange wachttijden - - - - Enable optimization which removes unnecessary points from G-Code output - Optimalisatie inschakelen die onnodige punten verwijdert van de G-Code uitvoer - - - - The completion mode for the operation: single or multi-pass - De voltooiing modus voor de bewerking: één of meerdere-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - De richting die het tool moet volge rond het werkstuk: Climb(met de klok mee) of conventioneel(tegen de klok) - - - - Ignore areas that proceed below specified depth. - Negeer gebieden die onder de opgegeven diepte gaan. - - - - Depth used to identify waste areas to ignore. - Diepte die gebruikt werd om de te negeren afvalgebieden te identificeren. - - - - Cut through waste to depth at model edge, releasing the model. - Ga door afval naar diepte aan de modelrand, waardoor het model vrijkomt. - - - - The library to use to generate the path - De te bibliotheek gebruiken voor het genereren van het pad + + The base geometry of this toolpath + De basisgeometrie voor dit gereedschapspad @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ongeldige hoek van de snijrand %.2f, moet >=0° en <90° zijn + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Toegenomen naar de standaard top. Kenmerk %s.%s kan niet als cirkelvormig gat worden verwerkt - gelieve deze uit de lijst met basisgeometrieën te verwijderen. - - Ignoring non-horizontal Face - Negeer niet-horizontaal vlak + + Face appears misaligned after initial rotation. + Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. + + + + Multiple faces in Base Geometry. + Meerdere vlakken in de basisgeometrie. + + + + Depth settings will be applied to all faces. + Diepte-instellingen zullen op alle vlakken toegepast worden. + + + + EnableRotation property is 'Off'. + EnableRotation-eigenschap is 'Uit'. @@ -1224,29 +1244,9 @@ Toegenomen naar de standaard top. Hulpmiddelen - - Face appears misaligned after initial rotation. - Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. - - - - Multiple faces in Base Geometry. - Meerdere vlakken in de basisgeometrie. - - - - Depth settings will be applied to all faces. - Diepte-instellingen zullen op alle vlakken toegepast worden. - - - - EnableRotation property is 'Off'. - EnableRotation-eigenschap is 'Uit'. + + Ignoring non-horizontal Face + Negeer niet-horizontaal vlak @@ -1382,6 +1382,19 @@ Toegenomen naar de standaard top. geen taak voor op %s gevonden. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathPocket + + + Pocket Shape + Vorm van de uitsparing + + + + Creates a Path Pocket object from a face or faces + Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken + Normal @@ -2030,16 +2053,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Final depth set below ZMin of face(s) selected. Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd. - - - Pocket Shape - Vorm van de uitsparing - - - - Creates a Path Pocket object from a face or faces - Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken - 3D Pocket @@ -3461,16 +3474,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Dressup - - - Dress-up - Verkleding - - - - Creates a Path Dess-up object from a selected path - Maakt een padverkledingsobject uit een geselecteerd pad - Please select one path object @@ -3490,6 +3493,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select a Path object Gelieve een padobject te selecteren + + + Dress-up + Verkleding + + + + Creates a Path Dess-up object from a selected path + Maakt een padverkledingsobject uit een geselecteerd pad + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Hop object Maakt een Padsprongobject + + + The selected object is not a path + + Het geselecteerde object is geen pad + + Please select one path object @@ -3977,13 +3997,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Hop Sprong maken - - - The selected object is not a path - - Het geselecteerde object is geen pad - - Path_Inspect @@ -4313,6 +4326,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Minimum Z Height Minimale Z-hoogte + + + The Job has no selected Base object. + Er is geen geselecteerd basisobject voor de taak. + Maximum Z Height @@ -4483,11 +4501,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Date Datum - - - The Job has no selected Base object. - Er is geen geselecteerd basisobject voor de taak. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_ToolController + + + Tool Number to Load + Te laden gereedschapsnummer + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Add Tool Controller Gereedschapsregelaar toevoegen - - - Tool Number to Load - Te laden gereedschapsnummer - Path_ToolTable @@ -4690,6 +4703,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a medial line engraving path Maakt een middelste lijn graveer pad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve vereist een graverende snijder met CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Engraver Cutting Edge Angle must be < 180 degrees. Engraver snij-hoek moet < 180 graden zijn. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve vereist een graverende snijder met CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Save toolbit library Toolbit-bibliotheek opslaan + + + Tooltable JSON (*.json) + Gereedschapstafel JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-gereedschapstafel (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-gereedschapstafel (*.tbl) + Open tooltable Open gereedschapstafel + + + Save tooltable + Gereedschapstafel opslaan + + + + Rename Tooltable + Hernoem gereedschapstabel + + + + Enter Name: + Naam invoeren: + + + + Add New Tool Table + Voeg nieuwe gereedschapstabel toe + + + + Delete Selected Tool Table + Verwijder de geselecteerde gereedschapstabel + + + + Rename Selected Tool Table + Hernoem de geselecteerde gereedschapstabel + Tooltable editor @@ -4954,11 +5012,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Gereedschapstafel XML (*.xml);;HeeksCAD-gereedschapstafel (*.tooltable) - - - Save tooltable - Gereedschapstafel opslaan - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Object doesn't have a tooltable property Object heeft geen gereedschapstafeleigenschap - - - Rename Tooltable - Hernoem gereedschapstabel - - - - Enter Name: - Naam invoeren: - - - - Add New Tool Table - Voeg nieuwe gereedschapstabel toe - - - - Delete Selected Tool Table - Verwijder de geselecteerde gereedschapstabel - - - - Rename Selected Tool Table - Hernoem de geselecteerde gereedschapstabel - - - - Tooltable JSON (*.json) - Gereedschapstafel JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-gereedschapstafel (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-gereedschapstafel (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.qm b/src/Mod/Path/Gui/Resources/translations/Path_no.qm index 7cc90c4d52..a72ac55eb3 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_no.qm and b/src/Mod/Path/Gui/Resources/translations/Path_no.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.ts b/src/Mod/Path/Gui/Resources/translations/Path_no.ts index 8f8f30f706..ba053508e1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_no.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_no.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm index bd86e6c283..84119d39ff 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index 073881dd49..cd9c5b28ca 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Linie frezowania wgłębnego są równoległe do tej osi. + + + The direction along which dropcutter lines are created + Kierunek tworzenia linii cięcia + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Czy operacja ma być ograniczona przez obiekt podstawowy czy przez ramkę obrysu obiektu bazowego + Additional offset to the selected bounding box Dodatkowe przesunięcie do wybranej ramki zaznaczenia + + + Step over percentage of the drop cutter path + Procentowa wielkość kroku ścieżki narzędzia + + + + Z-axis offset from the surface of the object + Odsunięcie osi Z od powierzchni obiektu + + + + The Sample Interval. Small values cause long wait times + Przykładowy interwał. Niskie wartości powodują długi okres oczekiwania + + + + Enable optimization which removes unnecessary points from G-Code output + Włącz optymalizację która usuwa nie potrzebne punkty z G-Code + + + + The completion mode for the operation: single or multi-pass + Tryb wykonania operacji: pojedyncza lub wieloprzejściowa + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Kierunek, w którym ścieżka narzędzia powinna przechodzić wokół części: współbieżnie (zgodnie z ruchem wskazówek zegara) lub przeciwbieżnie (przeciwnie do ruchu wskazówek zegara) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Indeks początkowy (kąt) dla skanowania obrotowego + + + Ignore areas that proceed below specified depth. + Ignoruj obszary, które sięgają poniżej określonej głębokości. + + + + Depth used to identify waste areas to ignore. + Głębokość używana do identyfikacji obszarów odpadów do zignorowania. + + + + Cut through waste to depth at model edge, releasing the model. + Odetnij odpad ne krawędzi modelu by uwolnić model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -189,11 +244,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. The path to be copied Ścieżka do skopiowania - - - The base geometry of this toolpath - Podstawowa geometria tej ścieżki narzędzia - The tool controller that will be used to calculate the path @@ -509,6 +559,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Extra offset to apply to the operation. Direction is operation dependent. Dodatkowy offset do operacji. Kierunek jest zależny od operacji. + + + The library to use to generate the path + Biblioteka używana do generowania ścieżki + Start pocketing at center or boundary @@ -650,64 +705,9 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Ustaw wartość Prawda, jeśli używasz kompensacji promienia frezu - - The direction along which dropcutter lines are created - Kierunek tworzenia linii cięcia - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Czy operacja ma być ograniczona przez obiekt podstawowy czy przez ramkę obrysu obiektu bazowego - - - - Step over percentage of the drop cutter path - Procentowa wielkość kroku ścieżki narzędzia - - - - Z-axis offset from the surface of the object - Odsunięcie osi Z od powierzchni obiektu - - - - The Sample Interval. Small values cause long wait times - Przykładowy interwał. Niskie wartości powodują długi okres oczekiwania - - - - Enable optimization which removes unnecessary points from G-Code output - Włącz optymalizację która usuwa nie potrzebne punkty z G-Code - - - - The completion mode for the operation: single or multi-pass - Tryb wykonania operacji: pojedyncza lub wieloprzejściowa - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Kierunek, w którym ścieżka narzędzia powinna przechodzić wokół części: współbieżnie (zgodnie z ruchem wskazówek zegara) lub przeciwbieżnie (przeciwnie do ruchu wskazówek zegara) - - - - Ignore areas that proceed below specified depth. - Ignoruj obszary, które sięgają poniżej określonej głębokości. - - - - Depth used to identify waste areas to ignore. - Głębokość używana do identyfikacji obszarów odpadów do zignorowania. - - - - Cut through waste to depth at model edge, releasing the model. - Odetnij odpad ne krawędzi modelu by uwolnić model. - - - - The library to use to generate the path - Biblioteka używana do generowania ścieżki + + The base geometry of this toolpath + Podstawowa geometria tej ścieżki narzędzia @@ -987,16 +987,16 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Selected tool is not a drill Wybrane narzędzie nie jest wiertłem - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Nieprawidłowy kąt krawędzi tnącej% .2f, musi wynosić <90 ° i> = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1155,9 +1155,29 @@ Zwiększona do górnej krawędzi materiału. Funkcja %s.%s nie może być przetworzona jako okrągły otwór - proszę usunąć ją z listy bazy geometrycznej. - - Ignoring non-horizontal Face - Ignorowanie niepoziomej ściany + + Face appears misaligned after initial rotation. + Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. + + + + Multiple faces in Base Geometry. + Wiele ścian w geometrii bazowej. + + + + Depth settings will be applied to all faces. + Ustawienia głębokości zostaną zastosowane do wszystkich ścian. + + + + EnableRotation property is 'Off'. + Właściwość Zezwól na obrót jest wyłączona. @@ -1225,29 +1245,9 @@ Zwiększona do górnej krawędzi materiału. Narzędzia - - Face appears misaligned after initial rotation. - Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. - - - - Multiple faces in Base Geometry. - Wiele ścian w geometrii bazowej. - - - - Depth settings will be applied to all faces. - Ustawienia głębokości zostaną zastosowane do wszystkich ścian. - - - - EnableRotation property is 'Off'. - Właściwość Zezwól na obrót jest wyłączona. + + Ignoring non-horizontal Face + Ignorowanie niepoziomej ściany @@ -1383,6 +1383,19 @@ Zwiększona do górnej krawędzi materiału. nie znaleziono zadań dla operacji %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Tablice ścieżek zawierające różne kontrolery narzędzi są obsługiwane zgodnie z kontrolerem narzędzia dla pierwszej ścieżki. + + PathCustom @@ -1979,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Kształt kieszeni + + + + Creates a Path Pocket object from a face or faces + Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy + Normal @@ -2029,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Głębokość końcowa ustawiona poniżej Z min dla wybranej(-ych) powierzchni. - - - Pocket Shape - Kształt kieszeni - - - - Creates a Path Pocket object from a face or faces - Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy - 3D Pocket @@ -2190,7 +2203,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile - Profil + Kontur @@ -2248,14 +2261,14 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select only Edges from the Base model - Proszę wybrać tylko krawędzie z modelu podstawowego + Proszę wybrać tylko krawędzie z modelu głównego Please select one or more edges from the Base model - Wybierz jedną lub więcej krawędzi z modelu podstawowego + Wybierz jedną lub więcej krawędzi z modelu głównego @@ -3464,16 +3477,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Ulepszenia - - - - Creates a Path Dess-up object from a selected path - Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki - Please select one path object @@ -3493,6 +3496,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Proszę wybrać obiekt-ścieżkę + + + Dress-up + Ulepszenia + + + + Creates a Path Dess-up object from a selected path + Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki + Path_DressupAxisMap @@ -3965,6 +3978,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tworzy obiekty Path Hop + + + The selected object is not a path + + Wybrany obiekt nie jest ścieżką + + Please select one path object @@ -3980,13 +4000,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Utwórz skok - - - The selected object is not a path - - Wybrany obiekt nie jest ścieżką - - Path_Inspect @@ -4201,7 +4214,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile - Profil + Kontur @@ -4316,6 +4329,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimalna wysokość Z + + + The Job has no selected Base object. + Zadanie nie ma wybranego obiektu bazowego. + Maximum Z Height @@ -4486,11 +4504,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data - - - The Job has no selected Base object. - Zadanie nie ma wybranego obiektu bazowego. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4651,6 +4664,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numer narzędzi do wczytania + Add Tool Controller to the Job @@ -4661,11 +4679,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Dodaj kontroler narzędzi - - - Tool Number to Load - Numer narzędzi do wczytania - Path_ToolTable @@ -4692,6 +4705,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Tworzy ścieżkę grawerowania linii środkowej + + + VCarve requires an engraving cutter with CuttingEdgeAngle + Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4702,11 +4720,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Kąt krawędzi tnącej grawera musi być <180 stopni. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi - Path_Waterline @@ -4741,11 +4754,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Zapisz bibliotekę narzędzi + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otwórz tabelę narzędziową + + + Save tooltable + Zapisz tabelę narzędziową + + + + Rename Tooltable + Zmień nazwę tabeli narzędzi + + + + Enter Name: + Wprowadź nazwę: + + + + Add New Tool Table + Dodaj nową tabelę narzędzi + + + + Delete Selected Tool Table + Usuń zaznaczoną tabelę narzędzi + + + + Rename Selected Tool Table + Zmień nazwę zaznaczonej tabeli narzędzi + Tooltable editor @@ -4956,11 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela narzędziowa XML (*.xml); tabela HeeksCAD (*.tooltable) - - - Save tooltable - Zapisz tabelę narzędziową - Tooltable XML (*.xml) @@ -4976,46 +5029,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiekt nie ma właściwości tooltable - - - Rename Tooltable - Zmień nazwę tabeli narzędzi - - - - Enter Name: - Wprowadź nazwę: - - - - Add New Tool Table - Dodaj nową tabelę narzędzi - - - - Delete Selected Tool Table - Usuń zaznaczoną tabelę narzędzi - - - - Rename Selected Tool Table - Zmień nazwę zaznaczonej tabeli narzędzi - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -6020,7 +6033,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile - Profil + Kontur diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm index f8cfd9fd82..0b68f36fe3 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index b86a24f8da..0518a65b5c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Linhas de Dropcutter são criadas em paralelo a este eixo. + + + The direction along which dropcutter lines are created + A direção ao longo da qual as linhas de corte são criadas + + + + Should the operation be limited by the stock object or by the bounding box of the base object + A operação deve ser limitada pelo objeto das ações ou pela caixa delimitadora do objeto base + Additional offset to the selected bounding box Deslocamento adicional à caixa delimitadora selecionada + + + Step over percentage of the drop cutter path + Passo a percentagem do caminho do cortador de gota + + + + Z-axis offset from the surface of the object + Deslocamento do eixo-z da superfície do objeto + + + + The Sample Interval. Small values cause long wait times + O intervalo de amostragem. Pequenos valores causam tempos de longa espera + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar otimização que remove pontos desnecessários do G-Code gerado + + + + The completion mode for the operation: single or multi-pass + O modo de conclusão da operação: único ou multipasse + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + A direção do caminho da ferramenta ao redor da peça deve ser: Sentido horário(CW) ou Sentido anti-horário(CCW) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Iniciar índice(ângulo) para a verificação rotativa + + + Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolam abaixo da profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de resíduos para ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Corte os resíduos para profundidade na borda do modelo, libertando o modelo. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra a ser aplicado à operação. A direção depende da operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Torne verdadeiro, se está usando a compensação do raio do cortador - - The direction along which dropcutter lines are created - A direção ao longo da qual as linhas de corte são criadas - - - - Should the operation be limited by the stock object or by the bounding box of the base object - A operação deve ser limitada pelo objeto das ações ou pela caixa delimitadora do objeto base - - - - Step over percentage of the drop cutter path - Passo a percentagem do caminho do cortador de gota - - - - Z-axis offset from the surface of the object - Deslocamento do eixo-z da superfície do objeto - - - - The Sample Interval. Small values cause long wait times - O intervalo de amostragem. Pequenos valores causam tempos de longa espera - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar otimização que remove pontos desnecessários do G-Code gerado - - - - The completion mode for the operation: single or multi-pass - O modo de conclusão da operação: único ou multipasse - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - A direção do caminho da ferramenta ao redor da peça deve ser: Sentido horário(CW) ou Sentido anti-horário(CCW) - - - - Ignore areas that proceed below specified depth. - Ignorar áreas que se desenrolam abaixo da profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de resíduos para ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Corte os resíduos para profundidade na borda do modelo, libertando o modelo. - - - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina %.2f inválido, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Aumentando para o topo do estoque. Objeto %s.%s não pode ser processado como um furo circular - por favor, remove-o da lista de geometria Base. - - Ignoring non-horizontal Face - Ignorando faces não-horizontais + + Face appears misaligned after initial rotation. + A face parece desalinhada após a rotação inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar a propriedade 'InverseAngle' e recalcular. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Configurações de profundidade serão aplicadas a todas as faces. + + + + EnableRotation property is 'Off'. + A propriedade HabilitarRotação está 'Desligada'. @@ -1224,29 +1244,9 @@ Aumentando para o topo do estoque. Utilidades - - Face appears misaligned after initial rotation. - A face parece desalinhada após a rotação inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar a propriedade 'InverseAngle' e recalcular. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Configurações de profundidade serão aplicadas a todas as faces. - - - - EnableRotation property is 'Off'. - A propriedade HabilitarRotação está 'Desligada'. + + Ignoring non-horizontal Face + Ignorando faces não-horizontais @@ -1382,6 +1382,19 @@ Aumentando para o topo do estoque. nenhuma tarefa para op %s encontrada. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arranjos de caminhos com diferentes controladores de ferramentas são manipulados conforme o controlador de ferramenta do primeiro caminho. + + PathCustom @@ -1980,6 +1993,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2030,16 +2053,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Final depth set below ZMin of face(s) selected. Profundidade final definida abaixo de ZMin para faces selecionadas. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -3461,16 +3474,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Dressup - - - Dress-up - Trajetória adicional - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de vestimento a partir de uma trajetória selecionada - Please select one path object @@ -3490,6 +3493,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Trajetória adicional + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de vestimento a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Hop object Cria uma trajetória de salto + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3977,13 +3997,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4313,6 +4326,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Minimum Z Height Altura Z mínima + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + Maximum Z Height @@ -4483,11 +4501,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Date Data - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4690,6 +4703,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a medial line engraving path Cria uma trajetória de gravação de linha mediana + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requer um cortador de gravura com CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Engraver Cutting Edge Angle must be < 180 degrees. Ângulo de corte da borda deve ser de < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requer um cortador de gravura com CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Save toolbit library Salvar biblioteca de brocas + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Renomear tabela de ferramentas + + + + Enter Name: + Digite o Nome: + + + + Add New Tool Table + Adicionar nova tabela de ferramentas + + + + Delete Selected Tool Table + Excluir tabela de ferramentas selecionada + + + + Rename Selected Tool Table + Renomear a tabela de ferramentas selecionada + Tooltable editor @@ -4954,11 +5012,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Renomear tabela de ferramentas - - - - Enter Name: - Digite o Nome: - - - - Add New Tool Table - Adicionar nova tabela de ferramentas - - - - Delete Selected Tool Table - Excluir tabela de ferramentas selecionada - - - - Rename Selected Tool Table - Renomear a tabela de ferramentas selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm index 4f366c4925..311051244d 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index 42fbe11379..314581a613 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Deslocamento no eixo Z desde a superfície do objeto + + + + The Sample Interval. Small values cause long wait times + Intervalo de amostragem. Valores pequenos causam longas esperas + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar otimização que remove pontos desnecessários do resultado G-Code + + + + The completion mode for the operation: single or multi-pass + O modo de conclusão da operação: passagem única ou múltipla + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignorar áreas que continuam abaixo da profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de desperdício a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra para aplicar à operação. Direção é dependente de operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Deslocamento no eixo Z desde a superfície do objeto - - - - The Sample Interval. Small values cause long wait times - Intervalo de amostragem. Valores pequenos causam longas esperas - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar otimização que remove pontos desnecessários do resultado G-Code - - - - The completion mode for the operation: single or multi-pass - O modo de conclusão da operação: passagem única ou múltipla - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignorar áreas que continuam abaixo da profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de desperdício a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina inválido %.2f, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Objeto %s.%s não pode ser processado como um furo circular - por favor, remover da lista de geometria Base. - - Ignoring non-horizontal Face - Ignorando Face não-horizontal + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utilidades - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignorando Face não-horizontal @@ -1382,6 +1382,19 @@ Increased to stock top. nenhum trabalho para op %s encontrado. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Cobrir - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Cobrir + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Cria objeto de ressalto da trajetória + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altura mínima em Z + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Introduzir Nome: + + + + Add New Tool Table + Adicionar Nova Tabela de Ferramenta + + + + Delete Selected Tool Table + Excluir Tabela de Ferramenta Selecionada + + + + Rename Selected Tool Table + Renomear a Tabela de Ferramenta Selecionada + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Introduzir Nome: - - - - Add New Tool Table - Adicionar Nova Tabela de Ferramenta - - - - Delete Selected Tool Table - Excluir Tabela de Ferramenta Selecionada - - - - Rename Selected Tool Table - Renomear a Tabela de Ferramenta Selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm index 9958da5495..756b980c13 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index c03978a4d6..07667ab218 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + Direcția de-a lungul căreia liniile dropcutter sunt create + + + + Should the operation be limited by the stock object or by the bounding box of the base object + În cazul în care operațiunea este limitată pentru obiectul stock sau de limitele parlelipipedului obiectului de bză + Additional offset to the selected bounding box Decalarea adițioanală la caseta selectată + + + Step over percentage of the drop cutter path + Pas peste procentajul traiectoriei de dropcutter + + + + Z-axis offset from the surface of the object + Deplasarea axei Z de la suprafața obiectului + + + + The Sample Interval. Small values cause long wait times + Interval de eșantionare. Valorile mai mici generează timp de așteptarea mai mari + + + + Enable optimization which removes unnecessary points from G-Code output + Permite optimizarea care elimină punctele inutile din codul G-Code rezultat + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Calea de acces de copiat - - - The base geometry of this toolpath - Geometria bază a traiectoriei sculei - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. + + + The library to use to generate the path + Bibliotecă de utilizat pentru a genera traiectoria + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - Direcția de-a lungul căreia liniile dropcutter sunt create - - - - Should the operation be limited by the stock object or by the bounding box of the base object - În cazul în care operațiunea este limitată pentru obiectul stock sau de limitele parlelipipedului obiectului de bză - - - - Step over percentage of the drop cutter path - Pas peste procentajul traiectoriei de dropcutter - - - - Z-axis offset from the surface of the object - Deplasarea axei Z de la suprafața obiectului - - - - The Sample Interval. Small values cause long wait times - Interval de eșantionare. Valorile mai mici generează timp de așteptarea mai mari - - - - Enable optimization which removes unnecessary points from G-Code output - Permite optimizarea care elimină punctele inutile din codul G-Code rezultat - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Bibliotecă de utilizat pentru a genera traiectoria + + The base geometry of this toolpath + Geometria bază a traiectoriei sculei @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Unghiul muchiei tăietoare este invalid %.2f, trebuie să fie < 90 ° şi > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Caracteristica %s.%s nu pot fi procesate ca un orificiu circular - vă rugăm să o înlăturaţi din lista de geometrie de Bază. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. nu s-a găsit nicio sarcină de lucru pentru op " %s ". + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de buzunar + + + + Creates a Path Pocket object from a face or faces + Creează un obiect tip buzunar plecând de la muchii sau o suprafață + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma de buzunar - - - - Creates a Path Pocket object from a face or faces - Creează un obiect tip buzunar plecând de la muchii sau o suprafață - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Traiectorie adițională - - - - Creates a Path Dess-up object from a selected path - Creează un obiect traiectorie adițională plecând de la un parcurs selecționat - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vă rugăm să selectaţi un obiect traiecorie + + + Dress-up + Traiectorie adițională + + + + Creates a Path Dess-up object from a selected path + Creează un obiect traiectorie adițională plecând de la un parcurs selecționat + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creează un obiect salt + + + The selected object is not a path + + Obiectul selectat nu este o traiectorie + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Creați un salt - - - The selected object is not a path - - Obiectul selectat nu este o traiectorie - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + Sarcina de lucru nu are obiect în Baza selecționată. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - Sarcina de lucru nu are obiect în Baza selecționată. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numărul uneltei de încărcat + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adăugare dispozitiv de control a sculei - - - Tool Number to Load - Numărul uneltei de încărcat - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabelă de scule JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de scule HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabelă de scule LinuxCNC (*.tbl) + Open tooltable Deschide tabela de scule + + + Save tooltable + Salvarea tabelei de scule + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de scule XML (*.xml);Masă de scule HeeksCAD (*.tooltable) - - - Save tooltable - Salvarea tabelei de scule - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiectul nu are o proprietate în tabelul de scule - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tabelă de scule JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de scule HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabelă de scule LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm index 4e87090a80..c8cb0dd7ec 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index dda4510795..7f5839d672 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Выбросные (Dropcutter) линии создаются параллельно этой оси. + + + The direction along which dropcutter lines are created + Направление вдоль которого создаются линии резака + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Операция должна быть ограничена заготовкой или ограничительной рамкой базового объекта + Additional offset to the selected bounding box Дополнительное смещение выбранной ограничительной рамки + + + Step over percentage of the drop cutter path + Процент превышения пути фрезы + + + + Z-axis offset from the surface of the object + Смещение оси Z от поверхности объекта + + + + The Sample Interval. Small values cause long wait times + Интервал выборки. Малые значения вызывают долгое ожидание + + + + Enable optimization which removes unnecessary points from G-Code output + Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) + + + + The completion mode for the operation: single or multi-pass + Режим завершения обработки: одно- или многопроходная + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Начальный индекс (угол) для вращающегося сканирования + + + Ignore areas that proceed below specified depth. + Игнорировать области, которые идут ниже указанной глубины. + + + + Depth used to identify waste areas to ignore. + Глубина, используемая для выявления областей отходов, чтобы игнорировать. + + + + Cut through waste to depth at model edge, releasing the model. + Резать через отходы до глубины края модели, освобождая модель. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Траектория для копирования - - - The base geometry of this toolpath - Базовая фигура для пути инструмента - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Дополнительное смещение применяется к операции. Направление зависит от операции. + + + The library to use to generate the path + Библиотека, используемая для создания траектории + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Установить в Истину, если используется компенсация радиуса инструмента - - The direction along which dropcutter lines are created - Направление вдоль которого создаются линии резака - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Операция должна быть ограничена заготовкой или ограничительной рамкой базового объекта - - - - Step over percentage of the drop cutter path - Процент превышения пути фрезы - - - - Z-axis offset from the surface of the object - Смещение оси Z от поверхности объекта - - - - The Sample Interval. Small values cause long wait times - Интервал выборки. Малые значения вызывают долгое ожидание - - - - Enable optimization which removes unnecessary points from G-Code output - Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) - - - - The completion mode for the operation: single or multi-pass - Режим завершения обработки: одно- или многопроходная - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки - - - - Ignore areas that proceed below specified depth. - Игнорировать области, которые идут ниже указанной глубины. - - - - Depth used to identify waste areas to ignore. - Глубина, используемая для выявления областей отходов, чтобы игнорировать. - - - - Cut through waste to depth at model edge, releasing the model. - Резать через отходы до глубины края модели, освобождая модель. - - - - The library to use to generate the path - Библиотека, используемая для создания траектории + + The base geometry of this toolpath + Базовая фигура для пути инструмента @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Неверный угол режущей кромки %.2f, должен быть >0° и <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Недопустимый угол режущей кромки %.2f, должно быть <90° и >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Неверный угол режущей кромки %.2f, должен быть >0° и <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Функция %s.%s не может быть обработана, как круглое отверстие, - удалите из списка базовой геометрии. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Грань станет неправильно выравнена после первоначального вращения. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. + + + + Multiple faces in Base Geometry. + Несколько граней в Базовой геометрии. + + + + Depth settings will be applied to all faces. + Настройки глубины будут применены ко всем граням. + + + + EnableRotation property is 'Off'. + Свойство позволить Вращение (EnableRotation) выключено. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Грань станет неправильно выравнена после первоначального вращения. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. - - - - Multiple faces in Base Geometry. - Несколько граней в Базовой геометрии. - - - - Depth settings will be applied to all faces. - Настройки глубины будут применены ко всем граням. - - - - EnableRotation property is 'Off'. - Свойство позволить Вращение (EnableRotation) выключено. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. не найдено задания для оп %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1979,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Форма кармана + + + + Creates a Path Pocket object from a face or faces + Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани + Normal @@ -2029,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Конечная глубина ниже заданного ZMin. - - - Pocket Shape - Форма кармана - - - - Creates a Path Pocket object from a face or faces - Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани - 3D Pocket @@ -3460,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Модифицировать - - - - Creates a Path Dess-up object from a selected path - Создаёт дополнения для выбранной траектории - Please select one path object @@ -3489,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Пожалуйста выберите Путь объект + + + Dress-up + Модифицировать + + + + Creates a Path Dess-up object from a selected path + Создаёт дополнения для выбранной траектории + Path_DressupAxisMap @@ -3961,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Создает объект шага пути + + + The selected object is not a path + + Выделенный объект не является путём + + Please select one path object @@ -3976,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Создать Шаг - - - The selected object is not a path - - Выделенный объект не является путём - - Path_Inspect @@ -4312,6 +4325,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + Задание не имеет выбранного базового объекта. + Maximum Z Height @@ -4482,11 +4500,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Дата - - - The Job has no selected Base object. - Задание не имеет выбранного базового объекта. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Номер инструмента для загрузки + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Добавить Контроллер Инструмента - - - Tool Number to Load - Номер инструмента для загрузки - Path_ToolTable @@ -4689,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Сохранить библиотеку инструментов + + + Tooltable JSON (*.json) + Таблица инструментов JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Таблица инструментов HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Таблица инструментов LinuxCNC (*.tbl) + Open tooltable Открыть таблицу инструментов + + + Save tooltable + Сохранить таблицу инструментов + + + + Rename Tooltable + Переименовать таблицу инструментов + + + + Enter Name: + Введите имя: + + + + Add New Tool Table + Добавить новую таблицу инструментов + + + + Delete Selected Tool Table + Удалить выбранную таблицу инструментов + + + + Rename Selected Tool Table + Переименовать выбранную таблицу инструментов + Tooltable editor @@ -4953,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Таблица инструментов XML (*.xml); Таблица инструментов HeeksCAD (*.tooltable) - - - Save tooltable - Сохранить таблицу инструментов - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Объект не содержит таблицу инструментов - - - Rename Tooltable - Переименовать таблицу инструментов - - - - Enter Name: - Введите имя: - - - - Add New Tool Table - Добавить новую таблицу инструментов - - - - Delete Selected Tool Table - Удалить выбранную таблицу инструментов - - - - Rename Selected Tool Table - Переименовать выбранную таблицу инструментов - - - - Tooltable JSON (*.json) - Таблица инструментов JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Таблица инструментов HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Таблица инструментов LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm index 1374de0c6b..e2066308ef 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts index b31bbb8fcf..2520fc7788 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Dodatočný odstup k vybranému ohraničujúcemu rámčeku + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Odsadenie isi Z od povrchu objektu + + + + The Sample Interval. Small values cause long wait times + Vzorový interval. Malé hodnoty spôsobujú dlhé čakacie doby + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Počiatočný index(uhol) pre rotačné skenovanie + + + Ignore areas that proceed below specified depth. + Ignorujte oblasti, ktoré pokračujú pod určenou hĺbkou. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Knižnica použitá pri generovaní dráhy + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Odsadenie isi Z od povrchu objektu - - - - The Sample Interval. Small values cause long wait times - Vzorový interval. Malé hodnoty spôsobujú dlhé čakacie doby - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignorujte oblasti, ktoré pokračujú pod určenou hĺbkou. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Knižnica použitá pri generovaní dráhy + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm index 2aba23822f..3ea823a9c9 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index 6efb4de248..d639f30403 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Črte spustnega rezkanja se naredijo vzporedno s to osjo. + + + The direction along which dropcutter lines are created + Smer vzdolž katere so ustvarjene črte spustnega razkanja + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Naj bo opravilo omejeno s predmetom iz zaloge ali z mejnim kvadrom osnovnega predmeta + Additional offset to the selected bounding box Dodatni odmik izbranega mejnega kvadra + + + Step over percentage of the drop cutter path + Odstotek prekoračenja poti spustnega rezkalnika + + + + Z-axis offset from the surface of the object + Odmik osi Z od površine predmeta + + + + The Sample Interval. Small values cause long wait times + Vzorčni korak. Majhne vrednosti povzročijo dolge čakalne čase + + + + Enable optimization which removes unnecessary points from G-Code output + Omogoči optimizacijo ki odstrani odvečne točke iz izhodne G-kode + + + + The completion mode for the operation: single or multi-pass + Način dokončanja opravila: eno ali večpreletno + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Smer vzdolž katere bi morala pot orodja potekati okoli dela: Vzpenjajoča (v smeri urinega kazalca) ali Običajna (v nasprotni smeri urnega kazalca) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Pokazatelj začetka (kót) pri sukajočem pregledu + + + Ignore areas that proceed below specified depth. + Prezri področja pod določeno globino. + + + + Depth used to identify waste areas to ignore. + Globina uporabljena za prepoznavanje področji z odpadom, ki bodo prezrta. + + + + Cut through waste to depth at model edge, releasing the model. + Reži skozi odpad do globine na robu modela s sprostitvijo modela. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Pot za kopiranje - - - The base geometry of this toolpath - Osnovna geometrija te poti orodja - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Pri opravilih naj se uporabi dodaten odmik. Smer je odvisna od opravila. + + + The library to use to generate the path + Knjižnica, ki se jo uporabi pri ustvarjanju poti + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Nastavi Prav, če se uporablja Popravek polmira rezkarja - - The direction along which dropcutter lines are created - Smer vzdolž katere so ustvarjene črte spustnega razkanja - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Naj bo opravilo omejeno s predmetom iz zaloge ali z mejnim kvadrom osnovnega predmeta - - - - Step over percentage of the drop cutter path - Odstotek prekoračenja poti spustnega rezkalnika - - - - Z-axis offset from the surface of the object - Odmik osi Z od površine predmeta - - - - The Sample Interval. Small values cause long wait times - Vzorčni korak. Majhne vrednosti povzročijo dolge čakalne čase - - - - Enable optimization which removes unnecessary points from G-Code output - Omogoči optimizacijo ki odstrani odvečne točke iz izhodne G-kode - - - - The completion mode for the operation: single or multi-pass - Način dokončanja opravila: eno ali večpreletno - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Smer vzdolž katere bi morala pot orodja potekati okoli dela: Vzpenjajoča (v smeri urinega kazalca) ali Običajna (v nasprotni smeri urnega kazalca) - - - - Ignore areas that proceed below specified depth. - Prezri področja pod določeno globino. - - - - Depth used to identify waste areas to ignore. - Globina uporabljena za prepoznavanje področji z odpadom, ki bodo prezrta. - - - - Cut through waste to depth at model edge, releasing the model. - Reži skozi odpad do globine na robu modela s sprostitvijo modela. - - - - The library to use to generate the path - Knjižnica, ki se jo uporabi pri ustvarjanju poti + + The base geometry of this toolpath + Osnovna geometrija te poti orodja @@ -986,16 +986,16 @@ Selected tool is not a drill Izbrano orodje ni sveder - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Neveljaven kót rezilnega roba %.2f, biti mora <90° in >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Povišano na vrh obdelovanca. Značilnost %s.%s ne more biti obdelana kot krožna luknja - prosim odstrani jo iz seznama Osnovne geometrije. - - Ignoring non-horizontal Face - Prezrta nevodoravna ploskev + + Face appears misaligned after initial rotation. + Ploskev je videti po začetnem sukanju neporavnana. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. + + + + Multiple faces in Base Geometry. + Večkratne ploskve v Osnovni geometriji. + + + + Depth settings will be applied to all faces. + Nastavitev globine bo uporabljena na vseh ploskvah. + + + + EnableRotation property is 'Off'. + Lastnost OmogočiSukanje je "Izklopljena". @@ -1224,29 +1244,9 @@ Povišano na vrh obdelovanca. Pripomočki - - Face appears misaligned after initial rotation. - Ploskev je videti po začetnem sukanju neporavnana. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. - - - - Multiple faces in Base Geometry. - Večkratne ploskve v Osnovni geometriji. - - - - Depth settings will be applied to all faces. - Nastavitev globine bo uporabljena na vseh ploskvah. - - - - EnableRotation property is 'Off'. - Lastnost OmogočiSukanje je "Izklopljena". + + Ignoring non-horizontal Face + Prezrta nevodoravna ploskev @@ -1382,6 +1382,19 @@ Povišano na vrh obdelovanca. opravila za op %s ni mogoče najti. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Razpostavitev poti z različnimi orodnimi krmilniki se ravnajo glede na orodni krmilnik prve poti. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Oblika ugreza + + + + Creates a Path Pocket object from a face or faces + Ustvari pot ugreza iz ploskve ali ploskev + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev). - - - Pocket Shape - Oblika ugreza - - - - Creates a Path Pocket object from a face or faces - Ustvari pot ugreza iz ploskve ali ploskev - 3D Pocket @@ -3461,16 +3474,6 @@ privzeto=10,0. Path_Dressup - - - Dress-up - Dodelava - - - - Creates a Path Dess-up object from a selected path - Ustvari iz izbrane poti predmet dodelave poti - Please select one path object @@ -3490,6 +3493,16 @@ privzeto=10,0. Please select a Path object Izberite pot + + + Dress-up + Dodelava + + + + Creates a Path Dess-up object from a selected path + Ustvari iz izbrane poti predmet dodelave poti + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ privzeto=10,0. Creates a Path Hop object Ustvari predmet skoka poti + + + The selected object is not a path + + Izbrani predmet ni pot + + Please select one path object @@ -3977,13 +3997,6 @@ privzeto=10,0. Create Hop Ustvari skok - - - The selected object is not a path - - Izbrani predmet ni pot - - Path_Inspect @@ -4313,6 +4326,11 @@ privzeto=10,0. Minimum Z Height Najmanjša višina Z + + + The Job has no selected Base object. + Opravilo nima izbranega osnovnega predmeta. + Maximum Z Height @@ -4483,11 +4501,6 @@ privzeto=10,0. Date Datum - - - The Job has no selected Base object. - Opravilo nima izbranega osnovnega predmeta. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ privzeto=10,0. Path_ToolController + + + Tool Number to Load + Številka orodja za nalaganje + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ privzeto=10,0. Add Tool Controller Dodaj orodni krmilnik - - - Tool Number to Load - Številka orodja za nalaganje - Path_ToolTable @@ -4690,6 +4703,11 @@ privzeto=10,0. Creates a medial line engraving path Ustvari vrezovalno pot po srednjici + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve potrebuje vrezovalnik s kotom rezilnega roba + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ privzeto=10,0. Engraver Cutting Edge Angle must be < 180 degrees. Rezilni kót vrezovalnika mora biti < 180 stopnij. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve potrebuje vrezovalnik s kotom rezilnega roba - Path_Waterline @@ -4739,11 +4752,56 @@ privzeto=10,0. Save toolbit library Shrani knjižnico orodnih nastavkov + + + Tooltable JSON (*.json) + Preglednica orodij JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-ova preglednica orodij (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-jeva preglednica orodij (*.tbl) + Open tooltable Odpri preglednico orodij + + + Save tooltable + Shrani preglednico orodij + + + + Rename Tooltable + Preimenuj orodno mizo + + + + Enter Name: + Vnesite ime: + + + + Add New Tool Table + Dodaj novo preglednico orodij + + + + Delete Selected Tool Table + Izbriši izbrano preglednico orodij + + + + Rename Selected Tool Table + Preimenuj izbrano preglednico orodij + Tooltable editor @@ -4954,11 +5012,6 @@ privzeto=10,0. Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Preglednica orodij XML (*.xml);;preglednica orodij HeeksCAD (*.tooltable) - - - Save tooltable - Shrani preglednico orodij - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ privzeto=10,0. Object doesn't have a tooltable property Predmet nima lastnosti preglednice orodij - - - Rename Tooltable - Preimenuj orodno mizo - - - - Enter Name: - Vnesite ime: - - - - Add New Tool Table - Dodaj novo preglednico orodij - - - - Delete Selected Tool Table - Izbriši izbrano preglednico orodij - - - - Rename Selected Tool Table - Preimenuj izbrano preglednico orodij - - - - Tooltable JSON (*.json) - Preglednica orodij JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-ova preglednica orodij (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-jeva preglednica orodij (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm index 198f5722a8..707969bbac 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index 572edeaab3..50d175443c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Путања за умножавање - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm index a670473325..7d85d715a1 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index bdaf877bf1..275a04d419 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter-linjer skapas parallellt med den här axeln. + + + The direction along which dropcutter lines are created + Riktningen längs vilken dropcutter linjer skapas + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Ska operationen begränsas av stamobjektet eller av grundobjektets begränsningsruta + Additional offset to the selected bounding box Ytterligare förskjutning till den markerade begränsningsramen + + + Step over percentage of the drop cutter path + Steg över procent av drop cutter-banan + + + + Z-axis offset from the surface of the object + Z-axelförskjutning från objektets yta + + + + The Sample Interval. Small values cause long wait times + Exempelintervallet. Små värden orsakar långa väntetider + + + + Enable optimization which removes unnecessary points from G-Code output + Aktivera optimering som tar bort onödiga punkter från G-Code-utdata + + + + The completion mode for the operation: single or multi-pass + Kompletteringsläget för operationen: enkel- eller flerpasspass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Den riktning som verktygsbanan ska gå runt delen: Klättra(Medurs) eller Konventionell(Moturs) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Startindex(vinkel) för rotationsgenomsökning + + + Ignore areas that proceed below specified depth. + Ignorera områden som fortsätter under angivet djup. + + + + Depth used to identify waste areas to ignore. + Djup som används för att identifiera avfallsområden att ignorera. + + + + Cut through waste to depth at model edge, releasing the model. + Skär genom avfall till djup vid modellkanten, släppa modellen. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - Basgeometri för den här verktygsbanan - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra förskjutning att gälla för operationen. Riktning är driftberoende. + + + The library to use to generate the path + Biblioteket som används för att generera banan + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Gör True, om du använder Cutter Radius Compensation - - The direction along which dropcutter lines are created - Riktningen längs vilken dropcutter linjer skapas - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Ska operationen begränsas av stamobjektet eller av grundobjektets begränsningsruta - - - - Step over percentage of the drop cutter path - Steg över procent av drop cutter-banan - - - - Z-axis offset from the surface of the object - Z-axelförskjutning från objektets yta - - - - The Sample Interval. Small values cause long wait times - Exempelintervallet. Små värden orsakar långa väntetider - - - - Enable optimization which removes unnecessary points from G-Code output - Aktivera optimering som tar bort onödiga punkter från G-Code-utdata - - - - The completion mode for the operation: single or multi-pass - Kompletteringsläget för operationen: enkel- eller flerpasspass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Den riktning som verktygsbanan ska gå runt delen: Klättra(Medurs) eller Konventionell(Moturs) - - - - Ignore areas that proceed below specified depth. - Ignorera områden som fortsätter under angivet djup. - - - - Depth used to identify waste areas to ignore. - Djup som används för att identifiera avfallsområden att ignorera. - - - - Cut through waste to depth at model edge, releasing the model. - Skär genom avfall till djup vid modellkanten, släppa modellen. - - - - The library to use to generate the path - Biblioteket som används för att generera banan + + The base geometry of this toolpath + Basgeometri för den här verktygsbanan @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ogiltig Skäreggsvinkel %.2f, måste vara <90° och >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Funktionen %s.%s kan inte bearbetas som ett cirkulärt hål - ta bort från listan med basgeometri. - - Ignoring non-horizontal Face - Ignorerar icke-horisontell yta + + Face appears misaligned after initial rotation. + Ansikte visas feljusterade efter inledande rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Tänk att växla "InverseAngle" egendom och omjäntar. + + + + Multiple faces in Base Geometry. + Flera ansikten i Basgeometri. + + + + Depth settings will be applied to all faces. + Djupinställningar kommer att tillämpas på alla ansikten. + + + + EnableRotation property is 'Off'. + EnableRotation-egenskapen är 'Av'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Ansikte visas feljusterade efter inledande rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Tänk att växla "InverseAngle" egendom och omjäntar. - - - - Multiple faces in Base Geometry. - Flera ansikten i Basgeometri. - - - - Depth settings will be applied to all faces. - Djupinställningar kommer att tillämpas på alla ansikten. - - - - EnableRotation property is 'Off'. - EnableRotation-egenskapen är 'Av'. + + Ignoring non-horizontal Face + Ignorerar icke-horisontell yta @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Fickform + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Fickform - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minsta Z-höjd + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Datum - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Ange namn: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Ange namn: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm index 5230a8da2a..a141967c21 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 7415f96c2f..99abde55a5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter çizgileri bu eksene paralel olarak oluşturulur. + + + The direction along which dropcutter lines are created + NoktalıKesim çizgilerinin oluşturulduğu yön + + + + Should the operation be limited by the stock object or by the bounding box of the base object + İşlem, stok nesnesi ya da temel nesnenin sınır kutusu tarafından sınırlanmalıdır + Additional offset to the selected bounding box Seçili Sınır Kutusunu ilave ötele + + + Step over percentage of the drop cutter path + Kesim noktası yolunun yüzdesini aşma + + + + Z-axis offset from the surface of the object + Nesne yüzeyinden Z-eksenine olan mesafe + + + + The Sample Interval. Small values cause long wait times + Örnekleme Aralığı. Küçük değerler uzun bekleme sürelerine neden olur + + + + Enable optimization which removes unnecessary points from G-Code output + G-Kod çıktısında gereksiz noktaları kaldıran optimizasyonu etkinleştir + + + + The completion mode for the operation: single or multi-pass + Operasyon için tamamlama modu: Tekil veya çok geçişli + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Takım yolunun parça etrafında dönme yönü: Tırmanış(Saat Yönü) veya Geleneksel(Saat Yönünün Tersi) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Dönel tarama için başlangıç açısı + + + Ignore areas that proceed below specified depth. + Belirtilen derinliğin altında ilerleyen alanları yok say. + + + + Depth used to identify waste areas to ignore. + Yok sayılacak atık alanlar için derinlik kullanıldı. + + + + Cut through waste to depth at model edge, releasing the model. + Atığı model sınırındaki derinliğe kadar kes, modeli yayınla. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Kopyalanacak yol - - - The base geometry of this toolpath - Bu takım yolunun temel geometrisi - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. + + + The library to use to generate the path + Yolu oluşturmak için kullanılacak kitaplık + Start pocketing at center or boundary @@ -546,7 +601,7 @@ The path(s) to array - The path(s) to array + Dizi oluşturulacak yol(lar) @@ -556,52 +611,52 @@ The spacing between the array copies in Linear pattern - The spacing between the array copies in Linear pattern + Doğrusal çoğaltmada, kopyalar arası boşluk The number of copies in X direction in Linear pattern - The number of copies in X direction in Linear pattern + Doğrusal çoğaltmada X yönündeki kopya sayısı The number of copies in Y direction in Linear pattern - The number of copies in Y direction in Linear pattern + Doğrusal çoğaltmada Y yönündeki kopya sayısı Total angle in Polar pattern - Total angle in Polar pattern + Dairesel desendeki toplam açı The number of copies in Linear 1D and Polar pattern - The number of copies in Linear 1D and Polar pattern + Doğrusal 1B ve Dairesel desendeki kopya sayısı The centre of rotation in Polar pattern - The centre of rotation in Polar pattern + Dairesel desen döndürme merkezi Make copies in X direction before Y in Linear 2D pattern - Make copies in X direction before Y in Linear 2D pattern + Doğrusal 2B desendeki Y 'den önce X yönünde kopyalar oluştur Percent of copies to randomly offset - Percent of copies to randomly offset + Rastgele ötelenecek kopyaların yüzdesi Maximum random offset of copies - Maximum random offset of copies + En çok rastgele kopya ötelemesi Arrays of paths having different tool controllers are handled according to the tool controller of the first path. - Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Farklı takım denetleyicisi olan takım yolu dizileri, ilk takım yolunun takım denetleyicisine bakılarak işlenecek. @@ -649,64 +704,9 @@ Kesici Yarıçap dengelemesi kullanıyorsanız, Gerçekleştirin - - The direction along which dropcutter lines are created - NoktalıKesim çizgilerinin oluşturulduğu yön - - - - Should the operation be limited by the stock object or by the bounding box of the base object - İşlem, stok nesnesi ya da temel nesnenin sınır kutusu tarafından sınırlanmalıdır - - - - Step over percentage of the drop cutter path - Kesim noktası yolunun yüzdesini aşma - - - - Z-axis offset from the surface of the object - Nesne yüzeyinden Z-eksenine olan mesafe - - - - The Sample Interval. Small values cause long wait times - Örnekleme Aralığı. Küçük değerler uzun bekleme sürelerine neden olur - - - - Enable optimization which removes unnecessary points from G-Code output - G-Kod çıktısında gereksiz noktaları kaldıran optimizasyonu etkinleştir - - - - The completion mode for the operation: single or multi-pass - Operasyon için tamamlama modu: Tekil veya çok geçişli - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Takım yolunun parça etrafında dönme yönü: Tırmanış(Saat Yönü) veya Geleneksel(Saat Yönünün Tersi) - - - - Ignore areas that proceed below specified depth. - Belirtilen derinliğin altında ilerleyen alanları yok say. - - - - Depth used to identify waste areas to ignore. - Yok sayılacak atık alanlar için derinlik kullanıldı. - - - - Cut through waste to depth at model edge, releasing the model. - Atığı model sınırındaki derinliğe kadar kes, modeli yayınla. - - - - The library to use to generate the path - Yolu oluşturmak için kullanılacak kitaplık + + The base geometry of this toolpath + Bu takım yolunun temel geometrisi @@ -979,23 +979,23 @@ Legacy Tools not supported - Legacy Tools not supported + Eski Araçlar desteklenmiyor Selected tool is not a drill - Selected tool is not a drill - - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + Seçilen araç bir matkap ucu değil Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Geçersiz Kesme kenar açı %.2f,-meli var olmak < 90° ve > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Mevcut üst noktaya arttırıldı. Özellik %s.%s olamaz dairesel delik olarak - işlenen temel geometri listeden kaldırın. - - Ignoring non-horizontal Face - Yatay olmayan Yüzeyi yok say + + Face appears misaligned after initial rotation. + İlk dönüşten sonra yüzeyler hizalanmadı. + + + + Consider toggling the 'InverseAngle' property and recomputing. + TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. + + + + Multiple faces in Base Geometry. + Ana geometrideki çoklu yüzler. + + + + Depth settings will be applied to all faces. + Derinlik ayarları tüm yüzeylere uygulanmış olacak. + + + + EnableRotation property is 'Off'. + DönüşüEtkinleştir özelliği 'Kapalı'. @@ -1224,29 +1244,9 @@ Mevcut üst noktaya arttırıldı. Yardımcılar - - Face appears misaligned after initial rotation. - İlk dönüşten sonra yüzeyler hizalanmadı. - - - - Consider toggling the 'InverseAngle' property and recomputing. - TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. - - - - Multiple faces in Base Geometry. - Ana geometrideki çoklu yüzler. - - - - Depth settings will be applied to all faces. - Derinlik ayarları tüm yüzeylere uygulanmış olacak. - - - - EnableRotation property is 'Off'. - DönüşüEtkinleştir özelliği 'Kapalı'. + + Ignoring non-horizontal Face + Yatay olmayan Yüzeyi yok say @@ -1361,7 +1361,7 @@ Mevcut üst noktaya arttırıldı. Extend Outline error - Extend Outline error + Dış Hattı Genişlet hatası @@ -1382,6 +1382,19 @@ Mevcut üst noktaya arttırıldı. buldum op %s iş yok. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Farklı takım denetleyicisi olan takım yolu dizileri, ilk takım yolunun takım denetleyicisine bakılarak işlenecek. + + PathCustom @@ -1535,27 +1548,27 @@ Mevcut üst noktaya arttırıldı. Click to enable Extensions - Click to enable Extensions + Uzantıları etkinleştirmek için tıklayın Click to include Edges/Wires - Click to include Edges/Wires + Kenarlar/Teller içermesi için tıklayın Extensions enabled - Extensions enabled + Uzantılar etkin Including Edges/Wires - Including Edges/Wires + Kenarlar/Teller dahil ediliyor Waterline error - Waterline error + Su hattı hatası @@ -1588,12 +1601,12 @@ Mevcut üst noktaya arttırıldı. %s not supported for flipping - %s not supported for flipping + %s, kaydırma için deskteklenmiyor Zero working area to process. Check your selection and settings. - Zero working area to process. Check your selection and settings. + Sıfır değerli işlenecek çalışma alanı. Seçiminizi ve ayarlarınızı gözden geçirin. @@ -1980,6 +1993,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathPocket + + + Pocket Shape + Cep şekli + + + + Creates a Path Pocket object from a face or faces + Yüz veya yüzlerden Path Pocket nesnesi oluşturur + Normal @@ -2030,16 +2053,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Final depth set below ZMin of face(s) selected. Son derinliği, seçili yüz(ler) in Zmin değeri altına ayarla. - - - Pocket Shape - Cep şekli - - - - Creates a Path Pocket object from a face or faces - Yüz veya yüzlerden Path Pocket nesnesi oluşturur - 3D Pocket @@ -2103,7 +2116,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Start Depth is lower than face depth. Setting to: - Start Depth is lower than face depth. Setting to: + Başlangıç Derinliği, yüzey derinliğinden aşağıda. Şuna ayarlanıyor: @@ -2176,7 +2189,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Check edge selection and Final Depth requirements for profiling open edge(s). - Check edge selection and Final Depth requirements for profiling open edge(s). + Kenar seçimini ve açık kenar(lar) ın profilini çıkarma için Son İşlem Derinliği gereksinimlerini gözden geçirin. @@ -2458,7 +2471,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Custom points are identical. - Custom points are identical. + Özel noktalar özdeş. @@ -2488,7 +2501,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se The selected face is inaccessible. - The selected face is inaccessible. + Seçilen yüz, ulaşılamaz konumda. @@ -2923,7 +2936,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Defines which standard thread was chosen - Defines which standard thread was chosen + Hangi standart vida dişinin seçildiğini tanımlar @@ -2948,7 +2961,7 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Set thread's TPI (turns per inch) - used for imperial threads - Set thread's TPI (turns per inch) - used for imperial threads + Dişlerin TPI (inç başına dönüş) değerini ayarla - İngiliz ölçü birimi dişleri için kullanılır @@ -3391,12 +3404,12 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates an array from selected path(s) - Creates an array from selected path(s) + Seçilen yol(lar) dan bir dizi oluşturur Arrays can be created only from Path operations. - Arrays can be created only from Path operations. + Diziler sadece Takım Yolu işlemleri üzerinden oluşturulabilir. @@ -3460,16 +3473,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Dressup - - - Dress-up - Giydirme - - - - Creates a Path Dess-up object from a selected path - Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur - Please select one path object @@ -3489,6 +3492,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Please select a Path object Lütfen bir Yol nesnesi seçin + + + Dress-up + Giydirme + + + + Creates a Path Dess-up object from a selected path + Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur + Path_DressupAxisMap @@ -3961,6 +3974,13 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Hop object Bir nokta nesnesi oluşturur + + + The selected object is not a path + + Seçilen nesne bir yol değil + + Please select one path object @@ -3976,13 +3996,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Hop Kopya oluştur - - - The selected object is not a path - - Seçilen nesne bir yol değil - - Path_Inspect @@ -4312,6 +4325,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Minimum Z Height En az Z Yüksekliği + + + The Job has no selected Base object. + İşin Seçili temel nesnesi yok. + Maximum Z Height @@ -4482,11 +4500,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Date Tarih - - - The Job has no selected Base object. - İşin Seçili temel nesnesi yok. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4661,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_ToolController + + + Tool Number to Load + Yüklenecek Takım Numarası + Add Tool Controller to the Job @@ -4658,11 +4676,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Add Tool Controller Araç Kumandasını Ekle - - - Tool Number to Load - Yüklenecek Takım Numarası - Path_ToolTable @@ -4689,6 +4702,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a medial line engraving path Bir orta çizgi gravür yolu oluşturur + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4717,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Engraver Cutting Edge Angle must be < 180 degrees. Gravür kesici kenar açısı < 180 derece olmalıdır. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir - Path_Waterline @@ -4738,11 +4751,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Save toolbit library Torna kalemi kitaplığını kaydet + + + Tooltable JSON (*.json) + Araç Tablosu JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD araç tablosu (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC araç tablosu (*.tbl) + Open tooltable Araç masasını açın + + + Save tooltable + Araç masasını kaydet + + + + Rename Tooltable + Torna kalemi yeniden adlandır + + + + Enter Name: + Ad Girin: + + + + Add New Tool Table + Yeni Alet Tablosu Ekle + + + + Delete Selected Tool Table + Seçili Alet Tablosunu Sil + + + + Rename Selected Tool Table + Seçili Araç Tablosunu Yeniden Adlandır + Tooltable editor @@ -4953,11 +5011,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Araç Tabanlı XML (*.xml);; HeeksCAD araç tablosu (*.tooltable) - - - Save tooltable - Araç masasını kaydet - Tooltable XML (*.xml) @@ -4973,46 +5026,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Object doesn't have a tooltable property Nesnenin araç özellikli bir özelliği yok - - - Rename Tooltable - Torna kalemi yeniden adlandır - - - - Enter Name: - Ad Girin: - - - - Add New Tool Table - Yeni Alet Tablosu Ekle - - - - Delete Selected Tool Table - Seçili Alet Tablosunu Sil - - - - Rename Selected Tool Table - Seçili Araç Tablosunu Yeniden Adlandır - - - - Tooltable JSON (*.json) - Araç Tablosu JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD araç tablosu (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC araç tablosu (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm index 3ceb13082e..b135d892dc 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 793160ec06..629298b093 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Паралельно цій осі створюються лінії різака. + + + The direction along which dropcutter lines are created + Напрямок, уздовж якого створюються лінії різака + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Якщо операція повинна бути обмежена наявним об'єктом або обмежувальною рамкою базового об'єкта + Additional offset to the selected bounding box Додаткове зміщення до обраної обмежувальної рамки + + + Step over percentage of the drop cutter path + Відсотковий крок шляху врізання + + + + Z-axis offset from the surface of the object + Зсув осі Z від поверхні об’єкта + + + + The Sample Interval. Small values cause long wait times + Інтервал вибірки. Малі значення викликають тривалий час очікування + + + + Enable optimization which removes unnecessary points from G-Code output + Увімкнути оптимізацію, що видаляє непотрібні точки з виведення G-Code + + + + The completion mode for the operation: single or multi-pass + Режим завершення операції: одно- або багатопрохідний + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Напрямок, яким повинен проходити шлях інструменту по деталі: Підйом (ClockWise) або Звичайний (CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Індекс старту (кут) для обертального сканування + + + Ignore areas that proceed below specified depth. + Ігнорувати ділянки, які проходять нижче вказаної глибини. + + + + Depth used to identify waste areas to ignore. + Глибина використовується для виявлення ділянок відходів, які потрібно ігнорувати. + + + + Cut through waste to depth at model edge, releasing the model. + Розрізати відходи на глибину до краю моделі, щоб звільнити модель. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Траєкторія для копіювання - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Бібліотека, що використовується для створення траєкторії + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - Напрямок, уздовж якого створюються лінії різака - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Якщо операція повинна бути обмежена наявним об'єктом або обмежувальною рамкою базового об'єкта - - - - Step over percentage of the drop cutter path - Відсотковий крок шляху врізання - - - - Z-axis offset from the surface of the object - Зсув осі Z від поверхні об’єкта - - - - The Sample Interval. Small values cause long wait times - Інтервал вибірки. Малі значення викликають тривалий час очікування - - - - Enable optimization which removes unnecessary points from G-Code output - Увімкнути оптимізацію, що видаляє непотрібні точки з виведення G-Code - - - - The completion mode for the operation: single or multi-pass - Режим завершення операції: одно- або багатопрохідний - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Напрямок, яким повинен проходити шлях інструменту по деталі: Підйом (ClockWise) або Звичайний (CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ігнорувати ділянки, які проходять нижче вказаної глибини. - - - - Depth used to identify waste areas to ignore. - Глибина використовується для виявлення ділянок відходів, які потрібно ігнорувати. - - - - Cut through waste to depth at model edge, releasing the model. - Розрізати відходи на глибину до краю моделі, щоб звільнити модель. - - - - The library to use to generate the path - Бібліотека, що використовується для створення траєкторії + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm index 8c25250fcd..71070cf69b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 171ea215ae..c8cd9d8771 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Les línies dropcutter es creen paral·leles a aquest eix. + + + The direction along which dropcutter lines are created + La direcció al llarg de la qual es creen les línies dropcutter + + + + Should the operation be limited by the stock object or by the bounding box of the base object + En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base + Additional offset to the selected bounding box Separació addicional a la caixa contenidora seleccionada + + + Step over percentage of the drop cutter path + Pas sobre el percentatge de la trajectòria del dropcutter + + + + Z-axis offset from the surface of the object + Separació de l'eix Z de la superfície de l'objecte + + + + The Sample Interval. Small values cause long wait times + L'interval de mostra. Els valors xicotets causen una llarga espera + + + + Enable optimization which removes unnecessary points from G-Code output + Activa l'optimització que suprimisca els punts innecessaris del resultat G-Code + + + + The completion mode for the operation: single or multi-pass + Mode de compleció per a l'operació: únic o múltiples passos + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Inicia l'índex(angle) per a l'escàner rotacional + + + Ignore areas that proceed below specified depth. + Ignora les àrees que passen per davall d'una profunditat especificada. + + + + Depth used to identify waste areas to ignore. + Profunditat utilitzada per a identificar àmplies àrees a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Retalla els residus fins al fons en la vora del model, alliberant-lo. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The direction along which dropcutter lines are created - La direcció al llarg de la qual es creen les línies dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - - Step over percentage of the drop cutter path - Pas sobre el percentatge de la trajectòria del dropcutter - - - - Z-axis offset from the surface of the object - Separació de l'eix Z de la superfície de l'objecte - - - - The Sample Interval. Small values cause long wait times - L'interval de mostra. Els valors xicotets causen una llarga espera - - - - Enable optimization which removes unnecessary points from G-Code output - Activa l'optimització que suprimisca els punts innecessaris del resultat G-Code - - - - The completion mode for the operation: single or multi-pass - Mode de compleció per a l'operació: únic o múltiples passos - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - - - - Ignore areas that proceed below specified depth. - Ignora les àrees que passen per davall d'una profunditat especificada. - - - - Depth used to identify waste areas to ignore. - Profunditat utilitzada per a identificar àmplies àrees a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Retalla els residus fins al fons en la vora del model, alliberant-lo. - - - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. La característica %s.%s no es pot processar com a forat circular; suprimiu-la de la llista de la geometria de base. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1380,6 +1380,19 @@ Increased to stock top. no s'ha trobat cap tasca per a op %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1978,6 +1991,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma del buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de buidatge des d'una o vàries cares + Normal @@ -2028,16 +2051,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma del buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de buidatge des d'una o vàries cares - 3D Pocket @@ -3449,16 +3462,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3476,6 +3479,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3948,6 +3961,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3963,12 +3982,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4295,6 +4308,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + Maximum Z Height @@ -4465,11 +4483,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Date Date - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4625,6 +4638,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4635,11 +4653,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afig un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4666,6 +4679,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4676,11 +4694,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4715,11 +4728,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afig una taula d'eines nova + + + + Delete Selected Tool Table + Elimina la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4930,11 +4988,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4950,46 +5003,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afig una taula d'eines nova - - - - Delete Selected Tool Table - Elimina la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm index cfe64cf3e0..8bf645746b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index c38198952d..bd84a0540b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + Khoảng thời gian mẫu. Các giá trị nhỏ dẫn đến việc phải chờ đợi trong thời gian dài + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied Đường dẫn cần được sao chép - - - The base geometry of this toolpath - Hình dạng cơ sở của đường chạy dao này - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. + + + The library to use to generate the path + Thư viện sử dụng để tạo đường dẫn + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - Khoảng thời gian mẫu. Các giá trị nhỏ dẫn đến việc phải chờ đợi trong thời gian dài - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - Thư viện sử dụng để tạo đường dẫn + + The base geometry of this toolpath + Hình dạng cơ sở của đường chạy dao này @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Góc cắt cạnh không hợp lệ %.2f, phải là <90° và >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Không thể xử lý tính năng %s.%s dưới dạng lỗ tròn - vui lòng xóa khỏi danh sách Hình học cơ sở. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. không tìm được công việc nào cho hoạt động %s. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hình túi + + + + Creates a Path Pocket object from a face or faces + Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hình túi - - - - Creates a Path Pocket object from a face or faces - Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Chức năng xây dựng kết cấu bên ngoài - - - - Creates a Path Dess-up object from a selected path - Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vui lòng chọn đối tượng Đường dẫn + + + Dress-up + Chức năng xây dựng kết cấu bên ngoài + + + + Creates a Path Dess-up object from a selected path + Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tạo một đối tượng đường dẫn bước nhảy + + + The selected object is not a path + + Đối tượng được chọn không phải là một đường dẫn + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Tạo bước nhảy - - - The selected object is not a path - - Đối tượng được chọn không phải là một đường dẫn - - Path_Inspect @@ -4313,6 +4326,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + Công việc không có đối tượng cơ sở đã chọn. + Maximum Z Height @@ -4483,11 +4501,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - Công việc không có đối tượng cơ sở đã chọn. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Số công cụ cần tải + Add Tool Controller to the Job @@ -4659,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Thêm bộ điều khiển công cụ - - - Tool Number to Load - Số công cụ cần tải - Path_ToolTable @@ -4690,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Công cụ JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Bảng công cụ HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Bảng công cụ LinuxCNC (*.tbl) + Open tooltable Mở hộp công cụ + + + Save tooltable + Lưu hộp công cụ + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Hộp công cụ XML (*.xml);;Hộp công cụ HeeksCAD (*.tooltable) - - - Save tooltable - Lưu hộp công cụ - Tooltable XML (*.xml) @@ -4974,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Đối tượng không có thuộc tính của hộp công cụ - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Công cụ JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Bảng công cụ HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Bảng công cụ LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm index 1abd184b95..56859ce634 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index 9bab8916ba..1870540dda 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -6,17 +6,17 @@ Show the temporary path construction objects when module is in DEBUG mode. - Show the temporary path construction objects when module is in DEBUG mode. + 当模块处于DEBUG模式时显示临时路径构造对象。 Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + 较小的数值能够产生更优、更精确的网格。但较小的数值会大量增加处理时间。 Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + 较小的数值能够产生更精细、更精确的网格。较小的数值不会增加更多的处理时间。 @@ -26,13 +26,53 @@ Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. + Dropcutter线平行于此轴创建。 + + + + The direction along which dropcutter lines are created + 沿落刀线创建的方向 + + + + Should the operation be limited by the stock object or by the bounding box of the base object + 操作被工件对象或者基础对象的边界框限制 Additional offset to the selected bounding box 基于选定边界框的额外偏移 + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + 从物体表面的Z轴偏移 + + + + The Sample Interval. Small values cause long wait times + 示例间隔。小值导致等待时间长 + + + + Enable optimization which removes unnecessary points from G-Code output + 启用优化，从G-Code输出中移除不必要的点 + + + + The completion mode for the operation: single or multi-pass + 操作完成模式：单次或多次 + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,30 +83,45 @@ Start index(angle) for rotational scan 旋转扫描的起始分度(角度) + + + Ignore areas that proceed below specified depth. + 忽略指定深度以下的区域。 + + + + Depth used to identify waste areas to ignore. + 用于确定将被忽略的废物区域的深度。 + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + 平面: 平面, 3D 表面扫描. 旋转: 4轴旋转扫描. Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. - Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. + 避免在选定面的基本几何列表中切削最后的“N”面部。 Do not cut internal features on avoided faces. - Do not cut internal features on avoided faces. + 不要在避免的面板上切削内部特征。 Positive values push the cutter toward, or beyond, the boundary. Negative values retract the cutter away from the boundary. - Positive values push the cutter toward, or beyond, the boundary. Negative values retract the cutter away from the boundary. + 正值将刀具推向或推到边界以外。负值使刀具从边界收回。 If true, the cutter will remain inside the boundaries of the model or selected face(s). - If true, the cutter will remain inside the boundaries of the model or selected face(s). + 如果为 true，刀具将保持在模型或选定约束面的边界内。 @@ -76,107 +131,107 @@ Positive values push the cutter toward, or into, the feature. Negative values retract the cutter away from the feature. - Positive values push the cutter toward, or into, the feature. Negative values retract the cutter away from the feature. + 正值将刀具推向或推入特征。负值使刀具从特征收回。 Cut internal feature areas within a larger selected face. - Cut internal feature areas within a larger selected face. + 在较大的选定面内切削内部特征区域。 Ignore internal feature areas within a larger selected face. - Ignore internal feature areas within a larger selected face. + 忽略较大选中面的内部特征区域。 Select the overall boundary for the operation. - Select the overall boundary for the operation. + 选择操作的总边界。 Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) - Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + 设置切割工具与材料接触的方向：顺铣 (顺时针) 或逆铣（逆时针) Set the geometric clearing pattern to use for the operation. - Set the geometric clearing pattern to use for the operation. + 设置要用于操作的几何清除模式。 The yaw angle used for certain clearing patterns - The yaw angle used for certain clearing patterns + 用于某些清除模式的 Z-Yaw角度 Reverse the cut order of the stepover paths. For circular cut patterns, begin at the outside and work toward the center. - Reverse the cut order of the stepover paths. For circular cut patterns, begin at the outside and work toward the center. + 反转步距路径的切削顺序。对于循环切削模式，起始于外部并向中心工作。 Set the Z-axis depth offset from the target surface. - Set the Z-axis depth offset from the target surface. + 设置目标表面的 Z 轴深度偏移。 Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. + 在一个深度完成操作，或是多层进入最后深度。 Set the start point for the cut pattern. - Set the start point for the cut pattern. + 设置切削模式的起始点。 Choose location of the center point for starting the cut pattern. - Choose location of the center point for starting the cut pattern. + 选择开始切削模式的中心点位置。 Profile the edges of the selection. - Profile the edges of the selection. + 配置所选区域的边缘。 Set the sampling resolution. Smaller values quickly increase processing time. - Set the sampling resolution. Smaller values quickly increase processing time. + 设置取样分辨率。较小的值会快速增加处理时间。 Set the stepover percentage, based on the tool's diameter. - Set the stepover percentage, based on the tool's diameter. + 根据刀具的直径设置步距百分比。 Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. - Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. + 启用线性路径优化(共线性点)。从G-代码输出中删除不必要的线性点。 Enable separate optimization of transitions between, and breaks within, each step over path. - Enable separate optimization of transitions between, and breaks within, each step over path. + 启用对路径上每一步之间过渡和中断的单独优化。 Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. - Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. + 将共面弧转换为 G2/G3 G代码 命令用于"Circular" 和 "CircularZigZag" 切削模式。 Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. - Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. + 小于此阈值的共线和等半径伪影间隙在路径中将被关闭。 Feedback: three smallest gaps identified in the path geometry. - Feedback: three smallest gaps identified in the path geometry. + 反馈：在路径几何中确定的三个最小间隙。 The custom start point for the path of this operation - The custom start point for the path of this operation + 此操作路径的自定义起始点 @@ -188,11 +243,6 @@ The path to be copied 要复制的路径 - - - The base geometry of this toolpath - 此工具路径的基础几何形状 - The tool controller that will be used to calculate the path @@ -231,27 +281,27 @@ X offset between tool and probe - X offset between tool and probe + 刀具和测头之间的 X 偏移 Y offset between tool and probe - Y offset between tool and probe + 刀具和测头之间的 Y 偏移 Number of points to probe in X direction - Number of points to probe in X direction + 要在 X 方向探测的点数 Number of points to probe in Y direction - Number of points to probe in Y direction + 要在 Y 方向探测的点数 The output location for the probe data to be written - The output location for the probe data to be written + 要写入的探针数据的输出位置 @@ -281,22 +331,22 @@ Extends LeadIn distance - Extends LeadIn distance + 延长导入距离 Extends LeadOut distance - Extends LeadOut distance + 延长引出距离 Perform plunges with G0 - Perform plunges with G0 + 使用 G0 执行进入 Apply LeadInOut to layers within an operation - Apply LeadInOut to layers within an operation + 将引入应用到操作中的图层 @@ -331,12 +381,12 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + 修整是否忽略修整起始深度上方的运动命令 The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + 启用斜坡修饰的深度。 在此斜坡上方不会生成，但会按原样传递运动命令。 @@ -351,7 +401,7 @@ The time to dwell between peck cycles - The time to dwell between peck cycles + 在啄式钻循环之间的暂停时间 @@ -376,17 +426,17 @@ Controls how tool retracts Default=G99 - Controls how tool retracts Default=G99 + 控制刀具退刀方式 Default=G99 The height where feed starts and height during retract tool when path is finished while in a peck operation - The height where feed starts and height during retract tool when path is finished while in a peck operation + 啄式加工路径完成时，进刀开始的高度和退刀时的高度 How far the drill depth is extended - How far the drill depth is extended + 钻孔深度延伸的距离 @@ -401,37 +451,37 @@ Clear edges of surface (Only applicable to BoundBox) - Clear edges of surface (Only applicable to BoundBox) + 清除表面边缘(仅适用于边界框) Exclude milling raised areas inside the face. - Exclude milling raised areas inside the face. + 不包括面内的凸起区域。 Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + 较小的数值能够产生更优、更精确的网格。但较小的数值会大量增加处理时间。 Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + 较小的数值能够产生更精细、更精确的网格。较小的数值不会增加更多的处理时间。 Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + 选择要使用的算法：OCL Dropcutter*，或实验性(不基于 OCL )。 Set to clear last layer in a `Multi-pass` operation. - Set to clear last layer in a `Multi-pass` operation. + 设置清理多层操作中的最后一层。 Ignore outer waterlines above this height. - Ignore outer waterlines above this height. + 忽略高于此高度的外水线。 @@ -441,73 +491,78 @@ Enter custom start point for slot path. - Enter custom start point for slot path. + 输入槽路径的自定义起始点。 Enter custom end point for slot path. - Enter custom end point for slot path. + 输入槽路径的自定义结束点。 Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. + 正值延长路径的起点，负值则缩短。 Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. + 正值延长路径的结束，负值则缩短。 Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. + 选择与所选特征相关的路径方向。 Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. + 选择要在第一个选定特征上使用的点。 Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. + 选择要在第二个选定特征上使用的点。 For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. + 圆弧/圆形边偏移半径。 Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. + 启用以反转槽路径的切削方向。 Use adaptive algorithm to eliminate excessive air milling above planar pocket top. - Use adaptive algorithm to eliminate excessive air milling above planar pocket top. + 使用自适应算法消除平面型腔顶部上方的过度空气铣削。 Use adaptive algorithm to eliminate excessive air milling below planar pocket bottom. - Use adaptive algorithm to eliminate excessive air milling below planar pocket bottom. + 使用自适应算法消除平面型腔顶部下方的过度空气铣削。 Process the model and stock in an operation with no Base Geometry selected. - Process the model and stock in an operation with no Base Geometry selected. + 在没有选择基础几何形状的操作中处理模型和毛坯。 The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + 工具路径应以顺时针或逆时针方向缠绕零件 Extra offset to apply to the operation. Direction is operation dependent. 要应用于操作的额外偏移量。方向与操作相关。 + + + The library to use to generate the path + 用于生成路径的库 + Start pocketing at center or boundary @@ -531,12 +586,12 @@ Use 3D Sorting of Path - Use 3D Sorting of Path + 使用3D 排序路径 Attempts to avoid unnecessary retractions. - Attempts to avoid unnecessary retractions. + 试图避免不必要的撤销。 @@ -546,7 +601,7 @@ The path(s) to array - The path(s) to array + 数组的路径 @@ -556,32 +611,32 @@ The spacing between the array copies in Linear pattern - The spacing between the array copies in Linear pattern + 线性模式数组副本之间的间距 The number of copies in X direction in Linear pattern - The number of copies in X direction in Linear pattern + 线性模式下X方向的份数 The number of copies in Y direction in Linear pattern - The number of copies in Y direction in Linear pattern + 线性模式下Y方向的份数 Total angle in Polar pattern - Total angle in Polar pattern + 极坐标中的总角度 The number of copies in Linear 1D and Polar pattern - The number of copies in Linear 1D and Polar pattern + 线性模式下1D和极坐标的份数 The centre of rotation in Polar pattern - The centre of rotation in Polar pattern + 极坐标模式的旋转中心 @@ -591,12 +646,12 @@ Percent of copies to randomly offset - Percent of copies to randomly offset + 随机偏移百分比 Maximum random offset of copies - Maximum random offset of copies + 最大随机偏移数 @@ -649,64 +704,9 @@ 如果使用刀具半径补偿, 则为 True - - The direction along which dropcutter lines are created - 沿落刀线创建的方向 - - - - Should the operation be limited by the stock object or by the bounding box of the base object - 操作被工件对象或者基础对象的边界框限制 - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - 从物体表面的Z轴偏移 - - - - The Sample Interval. Small values cause long wait times - 示例间隔。小值导致等待时间长 - - - - Enable optimization which removes unnecessary points from G-Code output - 启用优化，从G-Code输出中移除不必要的点 - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - 忽略指定深度以下的区域。 - - - - Depth used to identify waste areas to ignore. - 用于确定将被忽略的废物区域的深度。 - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - 用于生成路径的库 + + The base geometry of this toolpath + 此工具路径的基础几何形状 @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° 无效的切削角, 此角度必须小于90°且大于或等于 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1039,7 +1039,7 @@ Tool Error - Tool Error + 刀具错误 @@ -1049,7 +1049,7 @@ Feedrate Error - Feedrate Error + 进料率错误 @@ -1059,7 +1059,7 @@ Cycletime Error - Cycletime Error + 循环时间错误 @@ -1154,9 +1154,29 @@ Increased to stock top. 功能%s.%s 不能作为圆形孔的处理方法-请从 "基本几何图形" 列表中删除。 - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + 考虑切换“逆变角”属性并重新计算。 + + + + Multiple faces in Base Geometry. + 基础几何体中的多个面。 + + + + Depth settings will be applied to all faces. + 深度设置将应用于所有面。 + + + + EnableRotation property is 'Off'. + 启用旋转属性为“关闭”。 @@ -1224,67 +1244,47 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face <br>Pocket is based on extruded surface. - -<br>Pocket is based on extruded surface. + +<br>凹坑是基于挤出的表面。 <br>Bottom of pocket might be non-planar and/or not normal to spindle axis. - -<br>Bottom of pocket might be non-planar and/or not normal to spindle axis. + +<br>凹坑底部可能是非平面的和/或与主轴不垂直。 <br> <br><i>3D pocket bottom is NOT available in this operation</i>. - + <br> -<br><i>3D pocket bottom is NOT available in this operation</i>. +<br><i>3D 凹坑底部无法用于此操作</i>。 Processing subs individually ... - Processing subs individually ... + 单独处理子节点... Consider toggling the InverseAngle property and recomputing the operation. - Consider toggling the InverseAngle property and recomputing the operation. + 考虑切换“逆变角”属性并重新计算操作。 Verify final depth of pocket shaped by vertical faces. - Verify final depth of pocket shaped by vertical faces. + 通过垂直面来验证凹坑形状的绝对深度。 @@ -1304,22 +1304,22 @@ Increased to stock top. Selected faces form loop. Processing looped faces. - Selected faces form loop. Processing looped faces. + 选定的面形成循环。 处理循环面。 Applying inverse angle automatically. - Applying inverse angle automatically. + 自动应用逆角度. Applying inverse angle manually. - Applying inverse angle manually. + 手动应用逆角度. Rotated to inverse angle. - Rotated to inverse angle. + 旋转至反角。 @@ -1382,6 +1382,19 @@ Increased to stock top. 找不到 op %s 的作业。 + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1401,7 +1414,7 @@ Increased to stock top. The selected tool has no CuttingEdgeAngle property. Assuming Endmill - The selected tool has no CuttingEdgeAngle property. Assuming Endmill + 选定的刀具没有切削刃角度属性。 假设是立铣刀 @@ -1412,34 +1425,34 @@ Increased to stock top. The additional depth of the tool path - The additional depth of the tool path + 刀具路径的额外深度 The selected tool has no FlatRadius and no TipDiameter property. Assuming {} - The selected tool has no FlatRadius and no TipDiameter property. Assuming {} + 所选工具没有“平面半径”和“尖端直径”属性。 假设 {} How to join chamfer segments - How to join chamfer segments + 如何连接倒角段 Direction of Operation - Direction of Operation + 操作方向 Side of Operation - Side of Operation + 操作的边 Select the segment, there the operations starts - Select the segment, there the operations starts + 选择段，开始操作 @@ -1449,7 +1462,7 @@ Increased to stock top. Creates a Deburr Path along Edges or around Faces - Creates a Deburr Path along Edges or around Faces + 沿边或面创建去毛刺路径 @@ -1521,7 +1534,7 @@ Increased to stock top. Additional base objects to be engraved - Additional base objects to be engraved + 要雕刻的其他基础对象 @@ -1539,22 +1552,22 @@ Increased to stock top. Click to include Edges/Wires - Click to include Edges/Wires + 单击以包括边/线 Extensions enabled - Extensions enabled + 扩展已启用 Including Edges/Wires - Including Edges/Wires + 包括边缘/线 Waterline error - Waterline error + 水线错误 @@ -1562,7 +1575,7 @@ Increased to stock top. face %s not handled, assuming not vertical - face %s not handled, assuming not vertical + 未处理面%s, 假定不是垂直的 @@ -1587,12 +1600,12 @@ Increased to stock top. %s not supported for flipping - %s not supported for flipping + %s 不支持翻转 Zero working area to process. Check your selection and settings. - Zero working area to process. Check your selection and settings. + 零工作区处理。请检查您的选择和设置。 @@ -1610,17 +1623,17 @@ Increased to stock top. Tool Error - Tool Error + 刀具错误 Feedrate Error - Feedrate Error + 进料率错误 Cycletime Error - Cycletime Error + 循环时间错误 @@ -1711,12 +1724,12 @@ Increased to stock top. Last Time the Job was post-processed - Last Time the Job was post-processed + 上次对作业进行后处理的时间 An optional description for this job - An optional description for this job + 此项目的可选说明 @@ -1736,17 +1749,17 @@ Increased to stock top. Split output into multiple gcode files - Split output into multiple gcode files + 分割输出到多个gcode 文件 If multiple WCS, order the output this way - If multiple WCS, order the output this way + 如果多个WCS，按这种方式排序输出 The Work Coordinate Systems for the Job - The Work Coordinate Systems for the Job + 作业的工作坐标系 @@ -1756,12 +1769,12 @@ Increased to stock top. The base objects for all operations - The base objects for all operations + 所有操作的基本对象 Collection of all tool controllers for the job - Collection of all tool controllers for the job + 作业的所有刀具控制器的集合 @@ -1829,7 +1842,7 @@ Increased to stock top. Holds the diameter of the tool - Holds the diameter of the tool + 保存刀具的直径 @@ -1859,7 +1872,7 @@ Increased to stock top. Operations Cycle Time Estimation - Operations Cycle Time Estimation + 操作周期时间估计 @@ -1874,7 +1887,7 @@ Increased to stock top. Coolant mode for this operation - Coolant mode for this operation + 此操作的冷却模式 @@ -1889,7 +1902,7 @@ Increased to stock top. Starting Depth internal use only for derived values - Starting Depth internal use only for derived values + 仅对派生值起始深度内部使用 @@ -1924,17 +1937,17 @@ Increased to stock top. Lower limit of the turning diameter - Lower limit of the turning diameter + 车削直径下限 Upper limit of the turning diameter. - Upper limit of the turning diameter. + 车削直径上限. Coolant option for this operation - Coolant option for this operation + 此操作的冷却选项 @@ -1950,8 +1963,7 @@ Increased to stock top. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - FinalDepth cannot be modified for this operation. -If it is necessary to set the FinalDepth manually please select a different operation. + 无法为该操作修改终止深度。如果需要手动设置终止深度, 请选择其他操作。 @@ -1961,12 +1973,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Operation - Operation + 操作 Job Cycle Time Estimation - Job Cycle Time Estimation + 操作周期时间估计 @@ -1979,6 +1991,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + 口袋形状 + + + + Creates a Path Pocket object from a face or faces + 从一个或多个面创建一个路径口袋对象 + Normal @@ -2029,16 +2051,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - 口袋形状 - - - - Creates a Path Pocket object from a face or faces - 从一个或多个面创建一个路径口袋对象 - 3D Pocket @@ -2110,12 +2122,12 @@ If it is necessary to set the FinalDepth manually please select a different oper New property added to - New property added to + 添加到新属性 Check its default value. - Check its default value. + 检查其默认值。 @@ -2125,12 +2137,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Multiple faces in Base Geometry. - Multiple faces in Base Geometry. + 基础几何体中的多个面。 Depth settings will be applied to all faces. - Depth settings will be applied to all faces. + 深度设置将应用于所有面。 @@ -2432,7 +2444,7 @@ If it is necessary to set the FinalDepth manually please select a different oper New property added to - New property added to + 添加到新属性 @@ -2502,47 +2514,47 @@ If it is necessary to set the FinalDepth manually please select a different oper No parallel edges identified. - No parallel edges identified. + 找不到平行边。 value error. - value error. + 值错误 Current tool larger than arc diameter. - Current tool larger than arc diameter. + 当前工具大于圆弧直径。 Failed, slot from edge only accepts lines, arcs and circles. - Failed, slot from edge only accepts lines, arcs and circles. + 失败，从边缘开槽只接受直线、圆弧和圆。 Failed to determine point 1 from - Failed to determine point 1 from + 未能确定第 1 点 Failed to determine point 2 from - Failed to determine point 2 from + 未能确定第 2 点 Selected geometry not parallel. - Selected geometry not parallel. + 所选几何图形不平行。 The selected face is not oriented vertically: - The selected face is not oriented vertically: + 所选面未垂直定向： Current offset value produces negative radius. - Current offset value produces negative radius. + 当前偏移值产生负半径。 @@ -2550,42 +2562,42 @@ If it is necessary to set the FinalDepth manually please select a different oper Invalid base object %s - no shape found - Invalid base object %s - no shape found + 无效的基础对象 %s -找不到形状 The base object this stock is derived from - The base object this stock is derived from + 此工件派生自的基对象 Extra allowance from part bound box in negative X direction - Extra allowance from part bound box in negative X direction + X 轴负向物件外框的额外余量 Extra allowance from part bound box in positive X direction - Extra allowance from part bound box in positive X direction + X 轴正向零件外框的容许范围 Extra allowance from part bound box in negative Y direction - Extra allowance from part bound box in negative Y direction + Y 轴负向零件外框的容许范围 Extra allowance from part bound box in positive Y direction - Extra allowance from part bound box in positive Y direction + Y 轴正向零件外框的容许范围 Extra allowance from part bound box in negative Z direction - Extra allowance from part bound box in negative Z direction + Z 轴负向零件外框的容许范围 Extra allowance from part bound box in positive Z direction - Extra allowance from part bound box in positive Z direction + Z 轴正向零件外框的容许范围 @@ -2668,12 +2680,12 @@ If it is necessary to set the FinalDepth manually please select a different oper New property added to - New property added to + 添加到新属性 Check its default value. - Check its default value. + 检查其默认值。 @@ -2683,82 +2695,82 @@ If it is necessary to set the FinalDepth manually please select a different oper The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + 此作业的几何公差为0.0。 Initializing LinearDeflection to 0.001 mm. - Initializing LinearDeflection to 0.001 mm. + 正在初始化 线性偏移 到 0.001 毫米。 The GeometryTolerance for this Job is 0.0. Initializing LinearDeflection to 0.0001 mm. - The GeometryTolerance for this Job is 0.0. Initializing LinearDeflection to 0.0001 mm. + 此作业的几何公差为0.0。正在初始化线性偏移 到 0.0001 毫米。 Sample interval limits are 0.001 to 25.4 millimeters. - Sample interval limits are 0.001 to 25.4 millimeters. + 采样间隔限制是0.001至25.4毫米。 Cut pattern angle limits are +-360 degrees. - Cut pattern angle limits are +-360 degrees. + 切削模式角度限制为+-360度。 Cut pattern angle limits are +- 360 degrees. - Cut pattern angle limits are +- 360 degrees. + 切削模式角度限制为+-360度。 AvoidLastX_Faces: Only zero or positive values permitted. - AvoidLastX_Faces: Only zero or positive values permitted. + 避免最后 X 面：只允许零或正值。 AvoidLastX_Faces: Avoid last X faces count limited to 100. - AvoidLastX_Faces: Avoid last X faces count limited to 100. + AvoidLastX_facts: 避免最后的 X 面部数限制在100。 No JOB - No JOB + 无JOB Canceling 3D Surface operation. Error creating OCL cutter. - Canceling 3D Surface operation. Error creating OCL cutter. + 正在取消 3D 表面操作。创建OCL 刀具时出错。 operation time is - operation time is + 操作时间是 Canceled 3D Surface operation. - Canceled 3D Surface operation. + 已取消 3D 表面操作。 No profile geometry shape returned. - No profile geometry shape returned. + 没有返回轮廓几何形状。 No profile path geometry returned. - No profile path geometry returned. + 没有返回轮廓几何形状。 No clearing shape returned. - No clearing shape returned. + 没有返回清除形状。 No clearing path geometry returned. - No clearing path geometry returned. + 没有返回清除轮廓几何形状。 @@ -2768,22 +2780,22 @@ If it is necessary to set the FinalDepth manually please select a different oper Failed to identify tool for operation. - Failed to identify tool for operation. + 无法识别操作工具。 Failed to map selected tool to an OCL tool type. - Failed to map selected tool to an OCL tool type. + 无法将选中工具映射到 OCL 工具类型。 Failed to translate active tool to OCL tool type. - Failed to translate active tool to OCL tool type. + 无法将活动工具转换为 OCL 工具类型。 OCL tool not available. Cannot determine is cutter has tilt available. - OCL tool not available. Cannot determine is cutter has tilt available. + OCL 工具不可用。 无法确定刀具是否有倾斜可用。 @@ -2819,57 +2831,57 @@ If it is necessary to set the FinalDepth manually please select a different oper Shape appears to not be horizontal planar. - Shape appears to not be horizontal planar. + 形状似乎不是水平平面。 Cannot calculate the Center Of Mass. - Cannot calculate the Center Of Mass. + 无法计算质量中心。 Using Center of Boundbox instead. - Using Center of Boundbox instead. + 使用边界中心代替。 Face selection is unavailable for Rotational scans. - Face selection is unavailable for Rotational scans. + 面扫描不可用。 Ignoring selected faces. - Ignoring selected faces. + 忽略选定的面。 Failed to pre-process base as a whole. - Failed to pre-process base as a whole. + 未能作为一个整体预处理基本。 Cannot process selected faces. Check horizontal surface exposure. - Cannot process selected faces. Check horizontal surface exposure. + 无法处理选定的面。检查水平表面曝光。 Failed to create offset face. - Failed to create offset face. + 创建偏移面失败。 Failed to create collective offset avoid face. - Failed to create collective offset avoid face. + 未能创建集体偏移回避面。 Failed to create collective offset avoid internal features. - Failed to create collective offset avoid internal features. + 未能创建集体偏移避免内部特征。 Path transitions might not avoid the model. Verify paths. - Path transitions might not avoid the model. Verify paths. + 路径转换可能无法避开模型。请验证路径。 @@ -3245,7 +3257,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Additional base objects to be engraved - Additional base objects to be engraved + 要雕刻的其他基础对象 @@ -3255,39 +3267,38 @@ If it is necessary to set the FinalDepth manually please select a different oper cutoff for removing colinear segments (degrees). default=10.0. - cutoff for removing colinear segments (degrees). default=10.0. + 用于去除共线段的截止（度）。 默认值 = 10.0。 Cutoff for removing colinear segments (degrees). default=10.0. - Cutoff for removing colinear segments (degrees). default=10.0. + 用于去除共线段的截止（度）。 默认值 = 10.0。 Cutoff for removing colinear segments (degrees). default=10.0. - Cutoff for removing colinear segments (degrees). - default=10.0. + 用于去除共线段的截止（度）。 默认值 = 10.0。 The Job Base Object has no engraveable element. Engraving operation will produce no output. - The Job Base Object has no engraveable element. Engraving operation will produce no output. + 作业基对象没有可供雕刻的元素。 雕刻操作将不会产生输出。 Error processing Base object. Engraving operation will produce no output. - Error processing Base object. Engraving operation will produce no output. + 处理基础对象时出错。雕刻操作将不产生输出。 Vcarve - Vcarve + 雕刻 Creates a medial line engraving path - Creates a medial line engraving path + 创建中间线雕刻路径 @@ -3300,12 +3311,12 @@ If it is necessary to set the FinalDepth manually please select a different oper New property added to - New property added to + 添加到新属性 Check its default value. - Check its default value. + 检查其默认值。 @@ -3315,52 +3326,52 @@ If it is necessary to set the FinalDepth manually please select a different oper The GeometryTolerance for this Job is 0.0. - The GeometryTolerance for this Job is 0.0. + 此作业的几何公差为0.0。 Initializing LinearDeflection to 0.0001 mm. - Initializing LinearDeflection to 0.0001 mm. + 正在初始化 线性偏移 到 0.0001 毫米。 Sample interval limits are 0.0001 to 25.4 millimeters. - Sample interval limits are 0.0001 to 25.4 millimeters. + 采样间隔限制是0.0001至25.4毫米。 Cut pattern angle limits are +-360 degrees. - Cut pattern angle limits are +-360 degrees. + 切削模式角度限制为+-360度。 Cut pattern angle limits are +- 360 degrees. - Cut pattern angle limits are +- 360 degrees. + 切削模式角度限制为+-360度。 AvoidLastX_Faces: Only zero or positive values permitted. - AvoidLastX_Faces: Only zero or positive values permitted. + 避免最后 X 面：只允许零或正值。 AvoidLastX_Faces: Avoid last X faces count limited to 100. - AvoidLastX_Faces: Avoid last X faces count limited to 100. + AvoidLastX_facts: 避免最后的 X 面部数限制在100。 No JOB - No JOB + 无JOB Canceling Waterline operation. Error creating OCL cutter. - Canceling Waterline operation. Error creating OCL cutter. + 正在取消水线操作。创建OCL 刀具时出错。 operation time is - operation time is + 操作时间是 @@ -3391,12 +3402,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates an array from selected path(s) - Creates an array from selected path(s) + 从选定路径创建数组 Arrays can be created only from Path operations. - Arrays can be created only from Path operations. + 数组只能从路径操作中创建。 @@ -3460,16 +3471,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - 修饰 - - - - Creates a Path Dess-up object from a selected path - 从所选路径创建路径修整对象 - Please select one path object @@ -3489,6 +3490,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object 请选择路径对象 + + + Dress-up + 修饰 + + + + Creates a Path Dess-up object from a selected path + 从所选路径创建路径修整对象 + Path_DressupAxisMap @@ -3500,22 +3511,22 @@ If it is necessary to set the FinalDepth manually please select a different oper The input mapping axis - The input mapping axis + 输入映射轴 The radius of the wrapped axis - The radius of the wrapped axis + 包裹轴的半径 Axis Map Dress-up - Axis Map Dress-up + 轴贴图修饰 Remap one axis to another. - Remap one axis to another. + 将一个轴重新映射到另一个轴。 @@ -3634,22 +3645,22 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadOut the Path - The Style of LeadOut the Path + 退刀路径样式 The Mode of Point Radiusoffset or Center - The Mode of Point Radiusoffset or Center + 点半径偏移或中心模式 Edit LeadInOut Dress-up - Edit LeadInOut Dress-up + 编辑引入修饰 LeadInOut Dressup - LeadInOut Dressup + 引入修饰 @@ -3662,17 +3673,17 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Boundary dressup - Create a Boundary dressup + 创建一个边界修饰 Boundary Dress-up - Boundary Dress-up + 边界修饰 Creates a Path Boundary Dress-up object from a selected path - Creates a Path Boundary Dress-up object from a selected path + 从选定路径创建边界修饰对象 @@ -3682,7 +3693,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Path Boundary Dress-up - Create Path Boundary Dress-up + 创建一个边界修饰 @@ -3692,12 +3703,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Solid object to be used to limit the generated Path. - Solid object to be used to limit the generated Path. + 用于限制生成路径的实体对象。 Determines if Boundary describes an inclusion or exclusion mask. - Determines if Boundary describes an inclusion or exclusion mask. + 确定边界是描述包含或排除遮罩。 @@ -3768,7 +3779,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Factor determining the # of segments used to approximate rounded tags. - Factor determining the # of segments used to approximate rounded tags. + 用于近似四舍五入标签的段数的系数。 @@ -3793,7 +3804,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Cannot copy tags - internal error - Cannot copy tags - internal error + 无法复制标签 - 内部错误 @@ -3846,27 +3857,27 @@ If it is necessary to set the FinalDepth manually please select a different oper The point file from the surface probing. - The point file from the surface probing. + 来自表面探测的点文件。 Deflection distance for arc interpolation - Deflection distance for arc interpolation + 圆弧插补偏移距离 Edit Z Correction Dress-up - Edit Z Correction Dress-up + 编辑 Z 校正修饰 Z Depth Correction Dress-up - Z Depth Correction Dress-up + Z 深度校正修饰 Use Probe Map to correct Z depth - Use Probe Map to correct Z depth + 使用探测贴图来校正Z深度 @@ -3879,7 +3890,7 @@ If it is necessary to set the FinalDepth manually please select a different oper break segments into smaller segments of this length. - break segments into smaller segments of this length. + 将段分成此长度的较小的段。 @@ -3961,6 +3972,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object 创建一个路径跃点对象 + + + The selected object is not a path + + 所选对象不是路径 + + Please select one path object @@ -3976,13 +3994,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop 创建跃点 - - - The selected object is not a path - - 所选对象不是路径 - - Path_Inspect @@ -4057,7 +4068,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection - Model Selection + 型号选择 @@ -4065,7 +4076,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Toggle the Active State of the Operation - Toggle the Active State of the Operation + 切换操作的活动状态 @@ -4179,7 +4190,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Select Probe Point File - Select Probe Point File + 选择探测点文件 @@ -4235,7 +4246,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Check the path job for common errors - Check the path job for common errors + 检查路径项目中的常见错误 @@ -4260,67 +4271,72 @@ If it is necessary to set the FinalDepth manually please select a different oper No issues detected, {} has passed basic sanity check. - No issues detected, {} has passed basic sanity check. + 未检测到任何问题, {} 已通过基本的完整性检查。 Base Object(s) - Base Object(s) + 基本对象(s) Job Sequence - Job Sequence + 作业顺序 Job Description - Job Description + 作业描述 Job Type - Job Type + 作业类型 CAD File Name - CAD File Name + CAD 文件名 Last Save Date - Last Save Date + 上次保存时间 Customer - Customer + 客户 Designer - Designer + 设计人员 Operation - Operation + 操作 Minimum Z Height - Minimum Z Height + 最小Z高度 + + + + The Job has no selected Base object. + 作业没有选定的基对象。 Maximum Z Height - Maximum Z Height + 最大Z高度 Cycle Time - Cycle Time + 循环时间 @@ -4482,11 +4498,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - 作业没有选定的基对象。 - It appears the machine limits haven't been set. Not able to check path extents. @@ -4648,6 +4659,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + 要加载的工具编号 + Add Tool Controller to the Job @@ -4658,11 +4674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller 添加工具控制器 - - - Tool Number to Load - 要加载的工具编号 - Path_ToolTable @@ -4682,12 +4693,17 @@ If it is necessary to set the FinalDepth manually please select a different oper Vcarve - Vcarve + 雕刻 Creates a medial line engraving path - Creates a medial line engraving path + 创建中间线雕刻路径 + + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4715,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4749,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable json (*. json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (* tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (* tbl) + Open tooltable 打开 tooltable + + + Save tooltable + 保存 tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4953,11 +5009,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable xml (*. xml);;HeeksCAD tooltable (* tooltable) - - - Save tooltable - 保存 tooltable - Tooltable XML (*.xml) @@ -4973,46 +5024,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property 对象没有 tooltable 属性 - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable json (*. json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (* tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (* tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm index 1e4717464a..e6899bdefa 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 93c0fbed4b..e8d90fa669 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created + + + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + Additional offset to the selected bounding box Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + 樣本間隔。較小的數值導致長時間等待 + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied 要複製之路徑 - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + 用於生成函軌跡的函式庫 + Start pocketing at center or boundary @@ -649,64 +704,9 @@ Make True, if using Cutter Radius Compensation - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - 樣本間隔。較小的數值導致長時間等待 - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - - - - The library to use to generate the path - 用於生成函軌跡的函式庫 + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1154,9 +1154,29 @@ Increased to stock top. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - - Ignoring non-horizontal Face - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. @@ -1224,29 +1244,9 @@ Increased to stock top. Utils - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face + Ignoring non-horizontal Face @@ -1382,6 +1382,19 @@ Increased to stock top. no job for op %s found. + + PathArray + + + No base objects for PathArray. + No base objects for PathArray. + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathCustom @@ -1980,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4310,6 +4323,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height + + + The Job has no selected Base object. + The Job has no selected Base object. + Maximum Z Height @@ -4480,11 +4498,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date - - - The Job has no selected Base object. - The Job has no selected Base object. - It appears the machine limits haven't been set. Not able to check path extents. @@ -4645,6 +4658,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4655,11 +4673,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4686,6 +4699,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4696,11 +4714,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4735,11 +4748,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4950,11 +5008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4970,46 +5023,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm index 81e2eef793..890aa14520 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts index a8367ab26b..dad751a6da 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts @@ -121,7 +121,7 @@ &Reset Camera - Kamera zu&rücksetzen + Kamera zurücksetzen @@ -263,7 +263,7 @@ Möchten Sie fortfahren? No Raytracing project to insert - Kein Raytracing-Projekt zum Einfügen + Kein Raytracing-Projekt zum Einfügen vorhanden diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm index 5713c3d831..66eb4428a1 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts index 440b96c9cc..9c350f53d8 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts @@ -362,7 +362,7 @@ Do you want to continue? Max mesh deviation: - Max mesh deviation: + Максимальне відхилення полігональної сітки: @@ -449,7 +449,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + Використовується допоміжними інструментами diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm index dc1c11a36d..d7a98862dc 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts index 5e045f4ea5..17fadc0c0c 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts @@ -205,27 +205,27 @@ Fit plane - Fit plane + Разместить плоскость Fit cylinder - Fit cylinder + Разместить цилиндр Fit sphere - Fit sphere + Разместить сферу Fit polynomial surface - Fit polynomial surface + Разместить полиномиальную поверхность View triangulation - View triangulation + Просмотреть триангуляцию @@ -235,12 +235,12 @@ Fit B-Spline - Fit B-Spline + Разместить B-сплайн Poisson reconstruction - Poisson reconstruction + Реконструирование поверхности Пуассона diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm index 6139e2adaa..4d70b7b488 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts index 295a58d477..fe184a1dc9 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts @@ -52,7 +52,7 @@ Create a new empty trajectory - Create a new empty trajectory + Yeni bir boş yörünge oluştur diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm index 4b3582b06c..bc96a5b012 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts index 5907635bdb..b1da69d3f1 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts @@ -52,7 +52,7 @@ Create a new empty trajectory - Create a new empty trajectory + Створити нову порожню траєкторію @@ -246,7 +246,7 @@ Set the default orientation for subsequent commands for waypoint creation - Set the default orientation for subsequent commands for waypoint creation + Встановити орієнтацію за замовчуванням для наступних команд та створення маршрутних точок @@ -264,7 +264,7 @@ Set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation - Set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation + Встановити значення за замовчуванням для швидкості, прискорення та наступності для подальших команд створення маршрутних точок diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index 0c907b0e7a..be2a459cfd 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index ee0675f471..fbefb5e5ea 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -249,7 +249,7 @@ Create an arc in the sketcher - Crear un arco en el croquizador + Crea un arco en el croquis @@ -277,7 +277,7 @@ Create a B-spline in the sketch - Crear B-spline en el croquis + Crea una B-spline en el croquis @@ -323,7 +323,7 @@ Create a conic in the sketch - Crear una curva cónica en el croquis + Crea una curva cónica en el croquis @@ -394,7 +394,7 @@ Creates a rectangle in the sketch - Crea un rectángulo en un boceto + Crea un rectángulo en el croquis @@ -427,7 +427,7 @@ Create a regular polygon in the sketcher - Crear un polígono regular en el sketcher + Crea un polígono regular en el croquis @@ -1305,7 +1305,7 @@ con respecto a una línea o un tercer punto Create a polyline in the sketch. 'M' Key cycles behaviour - Crear una polilínea en el croquis. La tecla 'M' cambia su comportamiento + Crea una polilínea en el croquis. La tecla 'M' cambia su comportamiento @@ -1359,7 +1359,7 @@ con respecto a una línea o un tercer punto Create a regular polygon in the sketch - Crea un polígono regular en el boceto + Crea un polígono regular en el croquis @@ -1377,7 +1377,7 @@ con respecto a una línea o un tercer punto Create a slot in the sketch - Crear ranura en el croquis + Crea una ranura en el croquis diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm index da40b259eb..7232ba2533 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index a36d87d921..890a222e34 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Sortu laukizuzenak Creates a rectangle in the sketch - Creates a rectangle in the sketch + Sortu laukizuzen bat krokisean @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Laukizuzen zentratua Rounded rectangle - Rounded rectangle + Laukizuzen biribildua @@ -1193,12 +1193,12 @@ lerro batekiko edo hirugarren puntu batekiko Create rounded rectangle - Create rounded rectangle + Sortu laukizuzen biribildua Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Sortu laukizuzen biribildu bat krokisean @@ -1337,12 +1337,12 @@ lerro batekiko edo hirugarren puntu batekiko Create centered rectangle - Create centered rectangle + Sortu laukizuzen zentratua Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Sortu laukizuzen zentratu bat krokisean @@ -1766,7 +1766,7 @@ ispilatzerako erreferentzia gisa. Remove axes alignment - Remove axes alignment + Kendu ardatzen lerrokatzea @@ -2500,7 +2500,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Add rounded rectangle - Add rounded rectangle + Gehitu laukizuzen biribildua @@ -2653,7 +2653,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Remove Axes Alignment - Remove Axes Alignment + Kendu ardatzen lerrokatzea @@ -3423,22 +3423,22 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Sketcher Constraint Substitution - Sketcher Constraint Substitution + Kroskisgile-murrizketen ordezkapena Keep notifying me of constraint substitutions - Keep notifying me of constraint substitutions + Jarraitu murrizketa-ordezkapenak jakinarazten Endpoint to edge tangency was applied instead. - Endpoint to edge tangency was applied instead. + Amaiera-puntutik ertzerako tangentzia aplikatu da horren ordez. Endpoint to edge tangency was applied. The point on object constraint was deleted. - Endpoint to edge tangency was applied. The point on object constraint was deleted. + Amaiera-puntutik ertzerako tangentzia aplikatu da. Objektuaren gaineko puntuaren murrizketa ezabatu egin da. @@ -4617,12 +4617,12 @@ Unitate-sistema guztiak onartzen ditu, 'US customary' eta 'Building US/Euro' sal Force orthographic camera when entering edit - Force orthographic camera when entering edit + Behartu kamera ortografikoa edizioa hastean Open sketch in Section View mode - Open sketch in Section View mode + Ireki krokisa sekzio-bistaren moduan @@ -5349,7 +5349,7 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Over-constrained sketch - Over-constrained sketch + Gehiegi murriztutako krokisa diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm index a89c8c5eba..c06ee73ec9 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts index 229392e2d3..e3e9277438 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts @@ -11,12 +11,12 @@ Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + B-스플라인 곡률 빗 표시/숨기기 Switches between showing and hiding the curvature comb for all B-splines - Switches between showing and hiding the curvature comb for all B-splines + 모든 B-스플라인에 대한 곡률 빗 표시 및 숨기기 전환 @@ -29,12 +29,12 @@ Show/hide B-spline degree - Show/hide B-spline degree + B-스플라인 차수 표시/숨기기 Switches between showing and hiding the degree for all B-splines - Switches between showing and hiding the degree for all B-splines + 모든 B-스플라인에 대한 각도 표시 및 숨기기를 전환합니다. @@ -160,7 +160,7 @@ Show/hide B-spline degree - Show/hide B-spline degree + B-스플라인 차수 표시/숨기기 @@ -170,7 +170,7 @@ Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + B-스플라인 곡률 빗 표시/숨기기 @@ -2450,7 +2450,7 @@ invalid constraints, degenerated geometry, etc. Create a new sketch - Create a new sketch + 새로운 스케치 생성 @@ -5412,7 +5412,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Switches between showing and hiding the curvature comb for all B-splines - Switches between showing and hiding the curvature comb for all B-splines + 모든 B-스플라인에 대한 곡률 빗 표시 및 숨기기 전환 @@ -5430,7 +5430,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Switches between showing and hiding the degree for all B-splines - Switches between showing and hiding the degree for all B-splines + 모든 B-스플라인에 대한 각도 표시 및 숨기기를 전환합니다. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm index 4e7d530c72..47d9da3fdf 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts index 6c8569ece3..c0a4c8db41 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts @@ -361,22 +361,22 @@ Fillets - Fillets + Suapvalinimai Create a fillet between two lines - Create a fillet between two lines + Padaryti užapvalinimą tarp dviejų tiesių Sketch fillet - Sketch fillet + Brėžinio kraštinių suapvalinimas Constraint-preserving sketch fillet - Constraint-preserving sketch fillet + Apribotasis brėžinio kraštinių suapvalinimas @@ -1283,12 +1283,12 @@ with respect to a line or a third point Create corner-preserving fillet - Create corner-preserving fillet + Padaryti kampą išsaugantį kraštų suapvalinimą Fillet that preserves intersection point and most constraints - Fillet that preserves intersection point and most constraints + Suapvalinimas išlaikant sankirtos tašką ir atsižvelgiant į kitus apribojimus @@ -2742,7 +2742,7 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. + Neįmanoma nustatyti kreivių sankirtos. Pabandykite pridėti tapatumo apribojimą tarp dviejų kreivių, kurias norite užapvalinti, viršūnių. @@ -3924,7 +3924,7 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Radius: - Radius: + Spindulys: @@ -5640,7 +5640,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Creates a radius between two lines - Creates a radius between two lines + Apskaičiuoja apvalinimo tarp dviejų tiesių spindulį @@ -5699,7 +5699,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Fillet that preserves constraints and intersection point - Fillet that preserves constraints and intersection point + Suapvalinimas išlaikant apribojimus ir sankirtos tašką diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm index b606153af6..5bfa6a149d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index 1b46620fba..00f74e2673 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -203,17 +203,17 @@ Constrain radius - Straal vastzetten + Straal bematen Constrain diameter - Beperk de diameter + Bemaat de diameter Constrain auto radius/diameter - Beperk automatische straal/diameter + Bemaat straal/diameter automatisch @@ -526,7 +526,7 @@ Fix the angle of a line or the angle between two lines - Zet de hoek van een lijn of de hoek tussen twee lijnen vast + Bemaat de hoek van een lijn of de hoek tussen twee lijnen @@ -575,12 +575,12 @@ Constrain diameter - Beperk de diameter + Bemaat de diameter Fix the diameter of a circle or an arc - Zet de diameter van een cirkel of een boog vast + Bemaat de diameter van een cirkel of een boog @@ -598,7 +598,7 @@ Fix a length of a line or the distance between a line and a vertex - Vergrendel de lengte van een lijn of de afstand tussen een lijn en een punt + Bemaat de lengte van een lijn of de afstand tussen een lijn en een punt @@ -616,7 +616,7 @@ Fix the horizontal distance between two points or line ends - De horizontale afstand tussen twee punten of lijneinden vastzetten + De horizontale afstand tussen twee punten of lijneinden bematen @@ -634,7 +634,7 @@ Fix the vertical distance between two points or line ends - De verticale afstand tussen twee punten of lijneinden vastzetten + De verticale afstand tussen twee punten of lijneinden bematen @@ -775,12 +775,12 @@ op de geselecteerde hoekpunt Constrain auto radius/diameter - Beperk automatische straal/diameter + Bemaat straal/diameter automatisch Fix automatically diameter on circle and radius on arc/pole - Repareer automatisch diameter van cirkel en straal van boog/pool + Bemaat diameter van cirkel en straal van boog/pool automatisch @@ -3613,7 +3613,7 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Nothing to constrain - Niets vast te leggen + Niets te bematen @@ -5502,7 +5502,7 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Fix the diameter of a circle or an arc - Zet de diameter van een cirkel of een boog vast + Bemaat de diameter van een cirkel of een boog @@ -5519,7 +5519,7 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn Fix the radius of a circle or an arc - De straal van een cirkel of boog vastzetten + De straal van een cirkel of boog bematen diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm index 6268a721c5..cb1116540a 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index b1eb0563a8..ed987ad653 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -47,7 +47,7 @@ Show/hide B-spline knot multiplicity - Pokaż / ukryj ilość węzłów krzywej złożonej + Pokaż / ukryj krotność węzłów krzywej złożonej @@ -175,7 +175,7 @@ Show/hide B-spline knot multiplicity - Pokaż / ukryj ilość węzłów krzywej złożonej + Pokaż / ukryj krotność węzłów krzywej złożonej @@ -2810,7 +2810,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Broken link to support subelements - Link do obsługi podelementów nie działa + Uszkodzony link do elementów podrzędnych wsparcia @@ -2826,7 +2826,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Selected shapes are of wrong form (e.g., a curved edge where a straight one is needed) - Wybrane kształty mają złą formę (np. zakrzywiona krawędź, kiedy potrzebna jest prosta) + Wybrane kształty mają niewłaściwą formę (np. zakrzywiona krawędź, gdy należy użyć prostej) @@ -4049,7 +4049,7 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Unnamed - Bez nazwy + Nienazwany @@ -4183,7 +4183,7 @@ reflected on copies Normal Geometry - Normalna Geometria + Geometria normalna @@ -4732,7 +4732,7 @@ Widoczne będą obiekty tylko za płaszczyzną szkicu. %1 missing coincidences found - %1 znaleziono brakujących niezbieżności + Znaleziono %1 przypadki brakujących zbieżności @@ -4803,7 +4803,7 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). - Zamykanie orientacji zostało włączone i przeliczone dla więzów %1. Wiązania zostały wymienione w widoku Raportu (menu Widok -> Panele -> Widok raportu). + Blokada orientacji została włączona i ponownie obliczona dla %1 wiązań. Wiązania zostały wymienione w widoku Raportu (menu Widok -> Panele -> Widok raportu). diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index 71830e29b5..1d2737ea57 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index c9ee3be18b..1e96352f34 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -11,7 +11,7 @@ Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + Показать/скрыть гребень кривизны B-сплайна @@ -29,7 +29,7 @@ Show/hide B-spline degree - Show/hide B-spline degree + Показать/скрыть степень B-сплайна @@ -47,7 +47,7 @@ Show/hide B-spline knot multiplicity - Show/hide B-spline knot multiplicity + Показать/скрыть кратность узлов B-сплайна @@ -83,7 +83,7 @@ Show/hide B-spline control polygon - Show/hide B-spline control polygon + Показать/скрыть полигон управления B-сплайном @@ -160,22 +160,22 @@ Show/hide B-spline degree - Show/hide B-spline degree + Показать/скрыть степень B-сплайна Show/hide B-spline control polygon - Show/hide B-spline control polygon + Показать/скрыть полигон управления B-сплайном Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + Показать/скрыть гребень кривизны B-сплайна Show/hide B-spline knot multiplicity - Show/hide B-spline knot multiplicity + Показать/скрыть кратность узлов B-сплайна @@ -333,7 +333,7 @@ Ellipse by periapsis, apoapsis, minor radius - Ellipse by periapsis, apoapsis, minor radius + Эллипс по периапсиде, апоапсиде, малому радиусу @@ -508,7 +508,7 @@ Tie the end point of the element with next element's starting point - Tie the end point of the element with next element's starting point + Соединить конечную точку одного элемента с начальной точкой другого @@ -544,7 +544,7 @@ Block constraint: block the selected edge from moving - Block constraint: block the selected edge from moving + Блокирующее ограничение: блокирует перемещение выбранной линии @@ -1869,7 +1869,7 @@ This will clear the 'Support' property, if any. Select unconstrained DoF - Select unconstrained DoF + Выбрать геометрию имеющую неограниченные степени свободы @@ -1983,12 +1983,12 @@ This will clear the 'Support' property, if any. Split edge - Split edge + Разделить ребро Splits an edge into two while preserving constraints - Splits an edge into two while preserving constraints + Разделить ребро на две части с сохранением ограничений @@ -2129,7 +2129,7 @@ into driving or reference mode Validate sketch... - Проверить набросок... + Проверить эскиз... @@ -2214,7 +2214,7 @@ invalid constraints, degenerated geometry, etc. Add 'Lock' constraint - Add 'Lock' constraint + Добавить 'Блокирующее' ограничение @@ -2457,12 +2457,12 @@ invalid constraints, degenerated geometry, etc. Attach sketch - Attach sketch + Прикрепить эскиз Detach sketch - Detach sketch + Открепить эскиз @@ -2570,7 +2570,7 @@ invalid constraints, degenerated geometry, etc. Split edge - Split edge + Разделить ребро @@ -2585,17 +2585,17 @@ invalid constraints, degenerated geometry, etc. Add slot - Add slot + Добавить слот Add hexagon - Add hexagon + Добавить шестиугольник Convert to NURBS - Convert to NURBS + Преобразовать в NURBS @@ -2635,7 +2635,7 @@ invalid constraints, degenerated geometry, etc. Create copy of geometry - Create copy of geometry + Создать копию геометрии @@ -3157,7 +3157,7 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. + Блокирующее ограничение не может быть добавлено, если эскиз не решаем или имеются избыточные или конфликтующие ограничения. @@ -4295,7 +4295,7 @@ Requires to re-enter edit mode to take effect. Colors - Цвета + Выделение цветом @@ -4325,7 +4325,7 @@ Requires to re-enter edit mode to take effect. Coordinate text - Coordinate text + Текст с указанием координат @@ -4335,7 +4335,7 @@ Requires to re-enter edit mode to take effect. Creating line - Creating line + Создаваемый элемент @@ -4345,7 +4345,7 @@ Requires to re-enter edit mode to take effect. Geometric element colors - Geometric element colors + Цвет геометрических элементов @@ -4355,7 +4355,7 @@ Requires to re-enter edit mode to take effect. Unconstrained - Unconstrained + Без ограничения @@ -4417,7 +4417,7 @@ Requires to re-enter edit mode to take effect. Constrained - Constrained + С ограничением @@ -4427,7 +4427,7 @@ Requires to re-enter edit mode to take effect. Fully constrained Sketch - Fully constrained Sketch + Полностью ограниченный эскиз @@ -4462,12 +4462,12 @@ Requires to re-enter edit mode to take effect. Constraint colors - Constraint colors + Цвет ограничения Constraint symbols - Constraint symbols + Знаки ограничения @@ -5380,12 +5380,12 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 + Эскиз ограничен не полностью и имеет <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 степень</span></a> свободы. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 + Эскиз ограничен не полностью и имеет <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 степени(ей)</span></a> свободы. %2 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm index b0f3f191fb..8f6c868c37 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 77ce350716..b9988e14dc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -213,7 +213,7 @@ Constrain auto radius/diameter - Constrain auto radius/diameter + Yarı çapı/çapı otomatik kısıtla @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Dikdörtgenler oluştur Creates a rectangle in the sketch - Creates a rectangle in the sketch + Eskiz içerisinde bir dikdörtgen oluşturur @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Merkezden dikdörtgen Rounded rectangle - Rounded rectangle + Yuvarlatılmış dikdörtgen @@ -629,7 +629,7 @@ Constrain vertical distance - Constrain vertical distance + Dikey mesafeyi kısıtla @@ -774,12 +774,12 @@ on the selected vertex Constrain auto radius/diameter - Constrain auto radius/diameter + Yarı çapı/çapı otomatik kısıtla Fix automatically diameter on circle and radius on arc/pole - Fix automatically diameter on circle and radius on arc/pole + Daire üzerindeki çapı ve yay/kutup üzerindeki yarı çapı otomatik onar @@ -1190,12 +1190,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Yuvarlatılmış dikdörtgen oluştur Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Eskizde, yuvarlatılmış bir dikdörtgen oluştur @@ -1334,12 +1334,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Merkezden bir dikdörtgen oluştur Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Eskizde, merkezden bir dikdörtgen oluştur @@ -1760,12 +1760,12 @@ as mirroring reference. Remove axes alignment - Remove axes alignment + Eksenler hizalamasını kaldır Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Seçimin kısıtlama ilişkisini korumaya çalışırken, eksenler hizalamasını kaldırmak için kısıtlamaları değiştirir @@ -1980,12 +1980,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. Split edge - Split edge + Kenarı böl Splits an edge into two while preserving constraints - Splits an edge into two while preserving constraints + Kısıtlamaları koruyarak bir kenarı ikiye böl @@ -2330,7 +2330,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Swap PointOnObject+tangency with point to curve tangency - Swap PointOnObject+tangency with point to curve tangency + NesneÜzerindeNokta+teğetlik işlevini eğri teğetliğine nokta işlevi ile değiştir @@ -2388,7 +2388,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Add radiam constraint - Add radiam constraint + Yarıçap kısıtlaması ekle @@ -2489,12 +2489,12 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Add centered sketch box - Add centered sketch box + Merkezden eskiz çerçevesi ekle Add rounded rectangle - Add rounded rectangle + Yuvarlatılmış dikdörtgen ekle @@ -2567,7 +2567,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Split edge - Split edge + Kenarı böl @@ -2647,7 +2647,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Remove Axes Alignment - Remove Axes Alignment + Eksen Hizalamayı Kaldır @@ -3417,22 +3417,22 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Sketcher Constraint Substitution - Sketcher Constraint Substitution + Taslakçı Kısıtlama Yer Değişimi Keep notifying me of constraint substitutions - Keep notifying me of constraint substitutions + Kısıtlama yer değişikliklerinde beni uyarmaya devam et Endpoint to edge tangency was applied instead. - Endpoint to edge tangency was applied instead. + Bunun yerine, kenar teğetliğine bitiş noktası uygulandı. Endpoint to edge tangency was applied. The point on object constraint was deleted. - Endpoint to edge tangency was applied. The point on object constraint was deleted. + Kenar teğetliğine bitiş noktası uygulandı. 'Nesne üzerinde nokta' kısıtlaması silindi. @@ -3779,7 +3779,7 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Eksenleri hizalamayı kaldırma için en az bir seçili iç geometrik eleman gerekir @@ -4318,12 +4318,12 @@ Requires to re-enter edit mode to take effect. Working colors - Working colors + Çalışma renkleri Coordinate text - Coordinate text + Koordinat metni @@ -4333,27 +4333,27 @@ Requires to re-enter edit mode to take effect. Creating line - Creating line + Çizgi oluşturuluyor Cursor crosshair - Cursor crosshair + İmleç göstergesi Geometric element colors - Geometric element colors + Geometrik eleman renkleri Internal alignment edge - Internal alignment edge + İç hizalama kenarı Unconstrained - Unconstrained + Kısıtlanmamış @@ -4395,7 +4395,7 @@ Requires to re-enter edit mode to take effect. Deactivated constraint - Deactivated constraint + Devre dışı kısıtlama @@ -4415,7 +4415,7 @@ Requires to re-enter edit mode to take effect. Constrained - Constrained + Kısıtlanmış @@ -4425,7 +4425,7 @@ Requires to re-enter edit mode to take effect. Fully constrained Sketch - Fully constrained Sketch + Tamamen kısıtlanmış Eskiz @@ -4460,12 +4460,12 @@ Requires to re-enter edit mode to take effect. Constraint colors - Constraint colors + Kısıtlama renkleri Constraint symbols - Constraint symbols + Kısıtlama simgeleri @@ -4480,7 +4480,7 @@ Requires to re-enter edit mode to take effect. Expression dependent constraint - Expression dependent constraint + İfadeye bağımlı kısıtlama @@ -4607,12 +4607,12 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Force orthographic camera when entering edit - Force orthographic camera when entering edit + Düzenlemeye başlandığında dikey kamerayı zorla Open sketch in Section View mode - Open sketch in Section View mode + Eskizi Kesit Görünüşü kipinde aç @@ -4643,15 +4643,15 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. When entering edit mode, force orthographic view of camera. Works only when "Restore camera position after editing" is enabled. - When entering edit mode, force orthographic view of camera. -Works only when "Restore camera position after editing" is enabled. + Düzenleme kipine girildiğinde, kameranın dikey görünümüne zorla. +Sadece "Kamera konumunu düzenleme sonrası eski haline getir" etkin ise çalışır. Open a by default sketch in Section View mode. Then objects are only visible behind the sketch plane. - Open a by default sketch in Section View mode. -Then objects are only visible behind the sketch plane. + Bir eskizi varsayılan olarak Kesit Görünüşü kipinde aç. +Bu durumda nesneler, sadece taslak düzlemi arkasında görünür. @@ -5339,27 +5339,27 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Over-constrained sketch - Over-constrained sketch + Aşırı kısıtlanmış eskiz Sketch contains malformed constraints - Sketch contains malformed constraints + Eskiz, hatalı biçimlendirilmiş kısıtlamalar içeriyor Sketch contains conflicting constraints - Sketch contains conflicting constraints + Eskiz çakışan kısıtlamaları içeriyor Sketch contains redundant constraints - Sketch contains redundant constraints + Eskiz, gereksiz kısıtlamaları içeriyor Sketch contains partially redundant constraints - Sketch contains partially redundant constraints + Eskiz, kısmen gereksiz kısıtlamalar içeriyor @@ -5500,7 +5500,7 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Bir çember veya yayın yarı çapını/çapını onar @@ -5517,7 +5517,7 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Bir çember veya yayın yarı çapını/çapını onar @@ -5656,7 +5656,7 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Create a rounded rectangle - Create a rounded rectangle + Yuvarlatılmış dikdörtgen oluştur @@ -5697,7 +5697,7 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Create a rectangle - Create a rectangle + Dikdörtgen oluştur @@ -5705,7 +5705,7 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl Create a centered rectangle - Create a centered rectangle + Merkezden dikdörtgen oluştur diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm index 264f3927e1..a57dca1215 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index 1029fc45b0..1907f794ee 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -137,7 +137,7 @@ Close shape - Close shape + Закрити фігуру @@ -208,7 +208,7 @@ Constrain diameter - Constrain diameter + Обмежити діаметр @@ -272,12 +272,12 @@ Create a B-spline - Create a B-spline + Створити B-сплайн Create a B-spline in the sketch - Create a B-spline in the sketch + Створити B-сплайн в ескізі @@ -361,7 +361,7 @@ Fillets - Fillets + Скруглення @@ -575,7 +575,7 @@ Constrain diameter - Constrain diameter + Обмежити діаметр @@ -887,12 +887,12 @@ with respect to a line or a third point Convert geometry to B-spline - Convert geometry to B-spline + Перетворити геометрію на B-сплайн Converts the selected geometry to a B-spline - Converts the selected geometry to a B-spline + Перетворює виділену геометрію на B-сплайн diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm index 9d40997be8..9317136ae8 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts index e331b8afa0..b99214bb58 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -570,7 +570,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n row(s) above - Vložit %n řádek(ků) nad + Vložit %n řádek(řádků) nad Insert %n row(s) above Insert %n row(s) above Insert %n row(s) above @@ -579,7 +579,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n row(s) below - Vložit %n řádek(ků) pod + Vložit %n řádek(řádků) pod Insert %n row(s) below Insert %n row(s) below Insert %n row(s) below @@ -597,7 +597,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Remove row(s) - Odstranit řádek(y) + Odstranit řádek(řádky) Remove row(s) Remove row(s) Remove row(s) @@ -606,7 +606,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n column(s) left - Vložit %n sloupec(ů) vlevo + Vložit %n sloupec(sloupců) vlevo Insert %n column(s) left Insert %n column(s) left Insert %n column(s) left @@ -615,7 +615,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n column(s) right - Vložit %n sloupec(ů) vpravo + Vložit %n sloupec(sloupců) vpravo Insert %n column(s) right Insert %n column(s) right Insert %n column(s) right diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm index e94eafb823..e713355f57 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts index 669cd3441b..41baeb8b8e 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts @@ -558,7 +558,7 @@ Arkusz.mój_alias zamiast Arkusz.B1 SpreadsheetGui::Module Unnamed - Bez nazwy + Nienazwany diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm index 1bdb075832..102f00180d 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts index 5a8002c6ae..76364f91fd 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts @@ -474,15 +474,15 @@ Spreadsheet.my_alias_name вместо Spreadsheet.B1 Dark red - Тёмно-красный + Бордовый Green - Зеленый + Лайм Dark green - Тёмно-зелёный + Зелёный Blue @@ -498,15 +498,15 @@ Spreadsheet.my_alias_name вместо Spreadsheet.B1 Dark cyan - Тёмно-голубой + Морской волны Magenta - Малиновый + Розовый Dark magenta - Тёмно-малиновый + Фиолетовый Yellow @@ -514,7 +514,7 @@ Spreadsheet.my_alias_name вместо Spreadsheet.B1 Dark yellow - Тёмно-жёлтый + Оливковый Gray @@ -569,74 +569,74 @@ Spreadsheet.my_alias_name вместо Spreadsheet.B1 Insert %n row(s) above - - Insert %n row(s) above - Insert %n row(s) above - Insert %n row(s) above - Insert %n row(s) above + + Вставить %n строку выше + Вставить %n строки выше + Вставить %n строк выше + Вставить %n строк выше Insert %n row(s) below - - Insert %n row(s) below - Insert %n row(s) below - Insert %n row(s) below - Insert %n row(s) below + + Вставить %n строку ниже + Вставить %n строки ниже + Вставить %n строк ниже + Вставить %n строк ниже Insert %n non-contiguous rows - - Insert %n non-contiguous rows - Insert %n non-contiguous rows - Insert %n non-contiguous rows - Insert %n non-contiguous rows + + Вставить %n строку с пропуском строк + Вставить %n строки с пропуском строк + Вставить %n строк с пропуском строк + Вставить %n строк с пропуском строк Remove row(s) - - Remove row(s) - Remove row(s) - Remove row(s) - Remove row(s) + + Удалить строку + Удалить строки + Удалить строки + Удалить строки Insert %n column(s) left - - Insert %n column(s) left - Insert %n column(s) left - Insert %n column(s) left - Insert %n column(s) left + + Вставить %n столбец слева + Вставить %n столбца слева + Вставить %n столбцов слева + Вставить %n столбцов слева Insert %n column(s) right - - Insert %n column(s) right - Insert %n column(s) right - Insert %n column(s) right - Insert %n column(s) right + + Вставить %n столбец справа + Вставить %n столбца справа + Вставить %n столбцов справа + Вставить %n столбцов справа Insert %n non-contiguous columns - - Insert %n non-contiguous columns - Insert %n non-contiguous columns - Insert %n non-contiguous columns - Insert %n non-contiguous columns + + Вставить %n столбец с пропуском столбцов + Вставить %n столбца с пропуском столбцов + Вставить %n столбцов с пропуском столбцов + Вставить %n столбцов с пропуском столбцов Remove column(s) - - Remove column(s) - Remove column(s) - Remove column(s) - Remove column(s) + + Удалить столбец + Удалить столбцы + Удалить столбцы + Удалить столбцы diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm index 7cba8ef367..2d4dcc39da 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts index d66fe11c71..8b3c360221 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_tr.ts @@ -567,58 +567,58 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Insert %n row(s) above - - Insert %n row(s) above - Insert %n row(s) above + + Üste %n satır ekle + Üste %n satır ekle Insert %n row(s) below - - Insert %n row(s) below - Insert %n row(s) below + + Alta %n satır ekle + Alta %n satır ekle Insert %n non-contiguous rows - - Insert %n non-contiguous rows - Insert %n non-contiguous rows + + Bitişik olmayan %n satır ekle + Bitişik olmayan %n satır ekle Remove row(s) - - Remove row(s) - Remove row(s) + + Satır(lar) ı sil + Satır(lar) ı sil Insert %n column(s) left - - Insert %n column(s) left - Insert %n column(s) left + + Sola %n sütun(lar) ekle + Sola %n sütun(lar) ekle Insert %n column(s) right - - Insert %n column(s) right - Insert %n column(s) right + + Sağa %n sütun(lar) ekle + Sağa %n sütun(lar) ekle Insert %n non-contiguous columns - - Insert %n non-contiguous columns - Insert %n non-contiguous columns + + Bitişik olmayan %n sütun ekle + Bitişik olmayan %n sütun ekle Remove column(s) - - Remove column(s) - Remove column(s) + + Sütun(lar) kaldır + Sütun(lar) kaldır diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm index c4283b17c4..7fcd7ff14e 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.ts index 6471ba1ce0..ec87c5c22b 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ko.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ko.ts @@ -211,7 +211,7 @@ Open start page preferences - Open start page preferences + 시작 페이지 환경 설정 열기 @@ -291,8 +291,8 @@ An optional custom folder to be displayed at the bottom of the first page. By using ";;" to separate paths, you can add several folders here - An optional custom folder to be displayed at the bottom of the first page. -By using ";;" to separate paths, you can add several folders here + 첫 페이지 하단에 표시할 선택적 사용자 지정 폴더입니다. +사용하여 ";;" 경로를 분리하려면 여기에 여러 폴더를 추가할 수 있습니다. @@ -302,17 +302,17 @@ By using ";;" to separate paths, you can add several folders here Shows a notepad next to the file thumbnails, where you can keep notes across sessions - Shows a notepad next to the file thumbnails, where you can keep notes across sessions + 파일 축소판 옆에 메모장을 표시하여 세션 간에 메모를 보관할 수 있습니다. Show tips - Show tips + 팁 표시 Displays help tips in the Start workbench Documents tab - Displays help tips in the Start workbench Documents tab + 워크벤치 시작 문서 탭에 도움말 팁을 표시합니다. @@ -342,7 +342,7 @@ By using ";;" to separate paths, you can add several folders here Background color down gradient - Background color down gradient + 배경색 다운 그라디언트 @@ -362,7 +362,7 @@ By using ";;" to separate paths, you can add several folders here If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below + 이 항목이 선택되어 있고 일반 기본 설정에서 스타일 시트가 지정되어 있으면 이 스타일 시트가 사용되어 아래 색상을 무시합니다. @@ -457,7 +457,7 @@ By using ";;" to separate paths, you can add several folders here If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon + 이 옵션을 선택하면 '새 파일' 아이콘에 일반 아이콘 대신 그라데이션 아이콘이 표시됩니다. @@ -467,12 +467,12 @@ By using ";;" to separate paths, you can add several folders here Choose which workbench to switch to after the program launches - Choose which workbench to switch to after the program launches + 프로그램 실행 후 전환할 워크벤치 선택 If checked, will automatically close the Start page when FreeCAD launches - If checked, will automatically close the Start page when FreeCAD launches + 선택하면 FreeCAD가 시작될 때 시작 페이지가 자동으로 닫힙니다. @@ -487,12 +487,12 @@ By using ";;" to separate paths, you can add several folders here Close and switch on opening file - Close and switch on opening file + 파일을 닫고 켜기 If application is started by opening a file, apply the two settings above - If application is started by opening a file, apply the two settings above + 파일을 열어 응용 프로그램을 시작한 경우 위의 두 가지 설정을 적용하십시오. diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm index dc6932ec19..adf85ace0a 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts index d4452a705d..e5fa013af3 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts @@ -457,7 +457,7 @@ By using ";;" to separate paths, you can add several folders here If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon + Если данная опция выбрана, окно кнопки 'Создать новый...' будет отображаться градиентом вместо однотонного отображения @@ -492,7 +492,7 @@ By using ";;" to separate paths, you can add several folders here If application is started by opening a file, apply the two settings above - If application is started by opening a file, apply the two settings above + Если приложение запускается с открытым файлом, примените два приведенных выше параметра diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm index 39731b3d85..84d04dc16e 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts index 56c05f424a..38b03d5f7d 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts @@ -291,8 +291,8 @@ An optional custom folder to be displayed at the bottom of the first page. By using ";;" to separate paths, you can add several folders here - An optional custom folder to be displayed at the bottom of the first page. -By using ";;" to separate paths, you can add several folders here + İlk sayfanın altında görüntülenecek isteğe bağlı özel bir dizin. +Yolları ayırmak için ";;" (çift noktalı virgül) kullanarak birden fazla dizini buraya ekleyebilirsiniz @@ -302,17 +302,17 @@ By using ";;" to separate paths, you can add several folders here Shows a notepad next to the file thumbnails, where you can keep notes across sessions - Shows a notepad next to the file thumbnails, where you can keep notes across sessions + Dosya küçük resimlerinin yanında, oturumlar boyunca notlar tutabileceğiniz bir not defteri gösterir Show tips - Show tips + İpuçlarını göster Displays help tips in the Start workbench Documents tab - Displays help tips in the Start workbench Documents tab + Başlangıç tezgahı Belgeler sekmesinde yardım ipuçlarını gösterir @@ -342,7 +342,7 @@ By using ";;" to separate paths, you can add several folders here Background color down gradient - Background color down gradient + Arkaplan rengi aşağı geçişi @@ -362,7 +362,7 @@ By using ";;" to separate paths, you can add several folders here If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below + Eğer bu işaretlenirse ve Genel tercihlerde bir biçim sayfası belirtilirse, bu kullanılır ve aşağıdaki renkleri üzerine yazar @@ -457,7 +457,7 @@ By using ";;" to separate paths, you can add several folders here If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon + Bu seçilirse, 'Yeni Dosya' simgesi, sıradan simge yerine geçişli bir simge gösterecek @@ -467,12 +467,12 @@ By using ";;" to separate paths, you can add several folders here Choose which workbench to switch to after the program launches - Choose which workbench to switch to after the program launches + Program çalıştıktan sonra geçilecek tezgahı seçin If checked, will automatically close the Start page when FreeCAD launches - If checked, will automatically close the Start page when FreeCAD launches + İşaretlenirse, FreeCAD çalıştığında Başlangıç sayfası otomatik olarak kapanacak @@ -487,12 +487,12 @@ By using ";;" to separate paths, you can add several folders here Close and switch on opening file - Close and switch on opening file + Kapat ve açılan dosyaya geç If application is started by opening a file, apply the two settings above - If application is started by opening a file, apply the two settings above + Eğer uygulama bir dosya açılarak başlatılırsa, üstteki iki ayarı uygula diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm index 9f42f073b5..7034d56273 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts index 8041d720c1..af6d379da0 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_af.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Voeg annotasie @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Select an Image File - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Skep 'n bladsy om in te voeg. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Do you want to continue? Gekies: + + TechDrawGui::QGIViewAnnotation + + + Text + Teks + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm index 7542569be5..95f1ade286 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts index 5cfdfaa793..c2f27c4782 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines إضافة خط منصف بين خطين @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points اضافة خط منصف بين نقطتين @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw رسم تقني - + Add Centerline between 2 Lines إضافة خط منصف بين خطين @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw رسم تقني - + Add Centerline between 2 Points اضافة خط منصف بين نقطتين @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw رسم تقني - + Add Cosmetic Line Through 2 Points إضافه خط جمالي من خلال نقطتين @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw رسم تقني - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw رسم تقني - + Insert Center Line اضافه خط منصف - + Add Centerline to Faces اضافة خط منصف لوجوه @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw رسم تقني - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw رسم تقني - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw رسم تقني - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw رسم تقني - + Add Centerline to Faces اضافة خط منصف لوجوه @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw رسم تقني - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw رسم تقني - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw رسم تقني - + Insert Bitmap Image ادخال صورة Bitmap - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File تحديد ملف صورة - + Image (*.png *.jpg *.jpeg) صورة (*.png *.jpeg *.jpg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw رسم تقني - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw رسم تقني - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw رسم تقني - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw رسم تقني - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw رسم تقني - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection تحديد غير صحيح @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection إختيار غير صحيح @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first قم بإختيار وجها أولا - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Do you want to continue? محدد: + + TechDrawGui::QGIViewAnnotation + + + Text + نص + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm index 4b8b814bd4..289c58010f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index b9b108fb00..7bf73b2ead 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Afegeix una línia cosmètica amb 2 punts @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix Anotació @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix Línia Central - + Add Centerline to Faces Afegeix una línia central a les cares @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Lleva un objecte cosmètic @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afegeix un vèrtex cosmètic @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies - + Change Appearance of selected Lines Canvia l'aparença de les línies seleccionades @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afegeix una línia central a les cares @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Aplica trama geomètrica a la cara @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Tramat d'una cara utilitzant un fitxer d'imatge @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insereix una imatge de mapa de bits - - + + Insert Bitmap from a file into a page Insereix una imatge de mapa de bits d'un fitxer en una pàgina - + Select an Image File Selecciona un fitxer d'imatge - + Image (*.png *.jpg *.jpeg) Imatge (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afegeix vèrtex de punt central @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afegeix vèrtexs de quadrant @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Activa o desactiva els marcs de la vista @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afegeix la informació de soldadura a la línia guia @@ -848,7 +848,17 @@ Guardar pàgina com dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Afegeix vèrtexs de quadrant + + + Create Annotation Crear Anotació @@ -865,17 +875,17 @@ Crear dimensió - + Create Hatch Crear trama - + Create GeomHatch Create GeomHatch - + Create Image Crear imatge @@ -906,7 +916,12 @@ Crea una línia central - + + Create Cosmetic Line + Crea una línia cosmètica + + + Update CosmeticLine Actualitza la línia cosmètica @@ -965,6 +980,11 @@ Edit WeldSymbol Edita el Símbol de Soldadura + + + Add Cosmetic Vertex + Afegeix un vèrtex cosmètic + MRichTextEdit @@ -1181,22 +1201,22 @@ Font del document - + Create a link Crea un enllaç - + Link URL: URL de l'enllaç: - + Select an image Seleccioneu una imatge - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tot (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selecció incorrecta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selecció incorrecta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Selecció incorrecta @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entès la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - + Selection is empty. La selecció és buida. - + Not enough points in selection. No hi ha prou punts a la selecció. - + Selection is not a Cosmetic Line. La selecció no és una línia cosmètica. - + You must select 2 Vertexes. S'han de triar 2 vèrtexs. - + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + No Part Views in this selection No hi ha cap vista de peça en la selecció - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte de la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció - + Replace Hatch? Voleu reemplaçar la trama? - + Some Faces in selection are already hatched. Replace? Algunes cares en la selecció ja tenen trama. Voleu reemplaçar-les? - + No TechDraw Page No hi ha cap pàgina TechDraw - + Need a TechDraw Page for this command Es necessita una pàgina TechDraw per a aquesta ordre - + Select a Face first Seleccioneu primer una cara - + No TechDraw object in selection No hi ha cap objecte TechDraw en la selecció - + Create a page to insert. Creeu una pàgina per a inserir. - - + + No Faces to hatch in this selection No hi ha cares on aplicar el tramat en aquesta selecció @@ -1795,6 +1815,7 @@ Creador de text enriquit + Rich text editor @@ -3460,6 +3481,14 @@ Do you want to continue? Seleccionat: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3817,17 +3846,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Selecciona un punt per al vèrtex cosmètic - + Left click to set a point Feu clic al botó esquerre per a definir un punt - + In progress edit abandoned. Start over. S'ha abandonat l'edició en procés. Torna a començar. @@ -5012,7 +5041,7 @@ usant l'espaiat X/Y donat TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -5020,7 +5049,7 @@ usant l'espaiat X/Y donat TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -5036,7 +5065,7 @@ usant l'espaiat X/Y donat TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afegeix una línia central a una cara diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm index d1c4bcf0b9..2b4a14189f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 93914f38b0..175305e63f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Přidat osu mezi 2 přímky @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Přidat osu mezi 2 body @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Přidat osu mezi 2 přímky @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Přidat osu mezi 2 body @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Přidat pomocnou čáru mezi dvěma body @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Vložit poznámku @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Vložit středovou osu - + Add Centerline to Faces Přidat osu na plochu/y @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Odebrat pomocný objekt @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Přidat pomocný vrchol @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Změnit vzhled čar - + Change Appearance of selected Lines Změnit vzhled vybraných čar @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Přidat osu na plochu/y @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Použít geometrické šrafování na plochu @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Šrafovat plochu použitím obrazového souboru @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Vložit bitmapový obrázek - - + + Insert Bitmap from a file into a page Vložit bitmapu ze souboru na stránku - + Select an Image File Vyberte soubor obrázku - + Image (*.png *.jpg *.jpeg) Obrázek (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Přidat středy hran @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Přidat pravoúhlé vrcholy @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Zobrazit/skrýt neviditelné hrany @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Zapnout nebo vypnout zobrazení rámců @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Přidat svarovou informaci na odkazovou čáru @@ -848,7 +848,17 @@ Uložit stránku do dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Přidat pravoúhlé vrcholy + + + Create Annotation Vytvořit poznámku @@ -865,17 +875,17 @@ Vytvořit kótu - + Create Hatch Vytvoří šrafování - + Create GeomHatch Vytvořit geometrické šrafy - + Create Image Vytvořit obrázek @@ -906,7 +916,12 @@ Vytvořit osu - + + Create Cosmetic Line + Vytvořit pomocnou čáru + + + Update CosmeticLine Aktualizovat pomocnou čáru @@ -965,6 +980,11 @@ Edit WeldSymbol Upravit symbol svaru + + + Add Cosmetic Vertex + Přidat pomocný vrchol + MRichTextEdit @@ -1181,22 +1201,22 @@ Zdrojový kód dokumentu - + Create a link Vytvořit odkaz - + Link URL: URL odkazu: - + Select an image Vyberte obrázek - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Všechny (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Nesprávný výběr @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Nesprávný výběr @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Chybný výběr @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Pro čáru je nutno vybrat základní pohled. - + No DrawViewPart objects in this selection Ve výběru nejsou objekty DrawViewPart - - + + No base View in Selection. Ve výběru není základní pohled. - + You must select Faces or an existing CenterLine. Musíte vybrat plochy nebo existující osu. - + No CenterLine in selection. Žádná osa ve výběru. - - - + + + Selection is not a CenterLine. Výběr není osa. - + Selection not understood. Výběru nelze rozumět. - + You must select 2 Vertexes or an existing CenterLine. Musíte vybrat 2 vrcholy nebo existující osu. - + Need 2 Vertices or 1 CenterLine. Potřebuje 2 vrcholy nebo 1 osu. - + Selection is empty. Výběr je prázdný. - + Not enough points in selection. Nedostatek bodů ve výběru. - + Selection is not a Cosmetic Line. Výběr není pomocná čára. - + You must select 2 Vertexes. Musíte vybrat 2 vrcholy. - + No View in Selection. Ve výběru není žádný pohled. - + You must select a View and/or lines. Musíte vybrat pohled a/nebo čáry. - + No Part Views in this selection Žádné pohledy součásti ve výběru - + Select exactly one Leader line or one Weld symbol. Vybrat přesně jednu odkazovou čáru, nebo jeden symbol svaru. - - + + Nothing selected Není nic vybráno - + At least 1 object in selection is not a part view Minimálně 1 objekt ve výběru není součástí zobrazení dílu - + Unknown object type in selection Ve výběru je neznámý typ objektu - + Replace Hatch? Nahradit šrafování? - + Some Faces in selection are already hatched. Replace? Některé plochy ve výběru jsou již šrafované. Nahradit? - + No TechDraw Page Žádná stránka TechDraw - + Need a TechDraw Page for this command Pro tento příkaz je potřeba TechDraw stránka - + Select a Face first Nejprve vyberte plochu - + No TechDraw object in selection Ve výběru není objekt z TechDraw - + Create a page to insert. Vytvoření stránky pro vložení. - - + + No Faces to hatch in this selection V tomto výběru nejsou plochy pro šrafování @@ -1795,6 +1815,7 @@ Rozšířený editor textu + Rich text editor @@ -3468,6 +3489,14 @@ Chcete pokračovat? Vybráno: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3826,17 +3855,17 @@ Chcete pokračovat? Y - + Pick a point for cosmetic vertex Vyberte bod pro kosmetický vrchol - + Left click to set a point Kliknutím levým tlačítkem nastavíte bod - + In progress edit abandoned. Start over. Ukončeno ve fázi úprav. Začněte znovu. @@ -5021,7 +5050,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Přidat osu mezi dvě čáry @@ -5029,7 +5058,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Přidat osu mezi dva body @@ -5045,7 +5074,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index dc7c079b19..f38dfa7e1e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 8400755158..e2a507bc7c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Technisches Zeichnen - + Add Cosmetic Line Through 2 Points Hilfslinie durch 2 Punkte hinzufügen @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Technisches Zeichnen - + Insert Annotation Anmerkung einfügen @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Technisches Zeichnen - + Insert Center Line Mittellinie einfügen - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Technisches Zeichnen - + Remove Cosmetic Object Hilfsobjekt entfernen @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Technisches Zeichnen - + Add Cosmetic Vertex Hilfspunkt hinzufügen @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Technisches Zeichnen - + Change Appearance of Lines Liniendarstellung ändern - + Change Appearance of selected Lines Liniendarstellung ausgewählter Linien ändern @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Technisches Zeichnen - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Technisches Zeichnen - + Apply Geometric Hatch to Face Fläche mit einer geometrischen Schraffur versehen @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Technisches Zeichnen - + Hatch a Face using Image File Fläche mit Muster aus einer Bilddatei schraffieren @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Technisches Zeichnen - + Insert Bitmap Image Bitmap-Grafik einfügen - - + + Insert Bitmap from a file into a page Grafik aus einer Bitmap-Datei in eine Seite einfügen - + Select an Image File Eine Bilddatei auswählen - + Image (*.png *.jpg *.jpeg) Bild (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Technisches Zeichnen - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Technisches Zeichnen - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Technisches Zeichnen - + Show/Hide Invisible Edges Verdeckte Kanten ein-/ausblenden @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Technisches Zeichnen - - + + Turn View Frames On/Off Ansichtsrahmen ein- oder ausschalten @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Technisches Zeichnen - + Add Welding Information to Leaderline Hinzufügen von Schweißinformationen zur Hinweislinie @@ -848,7 +848,17 @@ Seite als dxf speichern - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Quadrantengrenzpunkte hinzufügen + + + Create Annotation Anmerkung erstellen @@ -865,17 +875,17 @@ Maß erstellen - + Create Hatch Schraffur erstellen - + Create GeomHatch Geometrische Schraffur erstellen - + Create Image Bild erstellen @@ -906,7 +916,12 @@ Mittellinie erstellen - + + Create Cosmetic Line + Hilfslinie erstellen + + + Update CosmeticLine Hilfslinie aktualisieren @@ -965,6 +980,11 @@ Edit WeldSymbol Schweißsymbol bearbeiten + + + Add Cosmetic Vertex + Hilfspunkt hinzufügen + MRichTextEdit @@ -1181,22 +1201,22 @@ Dokumentenquelle - + Create a link Hyperlink erstellen - + Link URL: Hyperlink-URL: - + Select an image Bild auswählen - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Alle (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Falsche Auswahl @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Falsche Auswahl @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Falsche Auswahl @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Sie müssen eine Basisansicht für die Linie auswählen. - + No DrawViewPart objects in this selection Keine DrawViewPart-Objekte in dieser Auswahl - - + + No base View in Selection. Keine Basisansicht ausgewählt. - + You must select Faces or an existing CenterLine. Sie müssen Flächen oder eine vorhandene Mittellinie auswählen. - + No CenterLine in selection. Keine Mittellinie ausgewählt. - - - + + + Selection is not a CenterLine. Auswahl ist keine Mittellinie. - + Selection not understood. Auswahl nicht verstanden. - + You must select 2 Vertexes or an existing CenterLine. Sie müssen 2 Punkte oder eine vorhandene Mittellinie auswählen. - + Need 2 Vertices or 1 CenterLine. Es werden 2 Punkte oder 1 Mittellinie benötigt. - + Selection is empty. Auswahl ist leer. - + Not enough points in selection. Nicht genügend Punkte ausgewählt. - + Selection is not a Cosmetic Line. Auswahl ist keine Hilfslinie. - + You must select 2 Vertexes. Es müssen 2 Knotenpunkte ausgewählt werden. - + No View in Selection. Keine Ansicht in der Auswahl. - + You must select a View and/or lines. Sie müssen eine Ansicht und / oder Linien auswählen. - + No Part Views in this selection Keine Fläche in dieser Auswahl - + Select exactly one Leader line or one Weld symbol. Auswahl genau einer Hinweislinie oder eines Schweißsymbols. - - + + Nothing selected Nichts ausgewählt - + At least 1 object in selection is not a part view Mindestens 1 Objekt in der Auswahl ist keine Bauteilansicht - + Unknown object type in selection Unbekannter Objekttyp in der Auswahl - + Replace Hatch? Schraffur ersetzen? - + Some Faces in selection are already hatched. Replace? Einige Flächen in der Auswahl sind bereits schraffiert. Ersetzen? - + No TechDraw Page Keine TechDraw-Seite - + Need a TechDraw Page for this command Benötige eine TechDraw-Seite für diesen Befehl - + Select a Face first Wählen Sie zuerst eine Fläche - + No TechDraw object in selection Diese Auswahl enthält kein TechDraw-Objekt - + Create a page to insert. Erzeugen Sie eine Seite zum Einfügen des Objekts. - - + + No Faces to hatch in this selection Diese Auswahl enthält keine zu schraffierende Flächen @@ -1795,6 +1815,7 @@ Rich-Text Ersteller + Rich text editor @@ -3464,6 +3485,14 @@ Do you want to continue? Ausgewählt: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3492,7 +3521,7 @@ Do you want to continue? Balloon - Balloon + Hinweiskreis @@ -3821,17 +3850,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Wähle einen Ort für einen Hilfspunkt - + Left click to set a point Linksklick, um einen Punkt zu setzen - + In progress edit abandoned. Start over. Bearbeitung abgebrochen. Fang noch mal von vorne an. @@ -5010,7 +5039,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Fügt eine Mittelline zwischen 2 Linien hinzu @@ -5018,7 +5047,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Fügt eine Mittelline zwischen 2 Punkten hinzu @@ -5034,7 +5063,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Fügt Flächen eine Mittellinie hinzu diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm index 734ae2e63f..2bebd3f542 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index ac3e839a86..ff9cec6bcd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Τεχνική Σχεδίαση - + Insert Annotation Εισαγωγή Περιγραφής @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Τεχνική Σχεδίαση - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Τεχνική Σχεδίαση - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Τεχνική Σχεδίαση - + Apply Geometric Hatch to Face Εφαρμογή Γεωμετρικού Μοτίβου Διαγράμμισης Επιφάνειας σε Όψη @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Τεχνική Σχεδίαση - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Τεχνική Σχεδίαση - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Επιλέξτε ένα Αρχείο Εικόνας - + Image (*.png *.jpg *.jpeg) Εικόνα (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Τεχνική Σχεδίαση - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Τεχνική Σχεδίαση - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Τεχνική Σχεδίαση - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Τεχνική Σχεδίαση - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Τεχνική Σχεδίαση - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Εσφαλμένη Επιλογή @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Εσφαλμένη επιλογή @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Δεν υπάρχει καμία Σελίδα Τεχνικής Σχεδίασης - + Need a TechDraw Page for this command Απαιτείται μια Σελίδα Τεχνικής Σχεδίασης για αυτήν την εντολή - + Select a Face first Επιλέξτε πρώτα μια Όψη - + No TechDraw object in selection Δεν υπάρχει κανένα αντικείμενο Τεχνικής Σχεδίασης στην επιλογή - + Create a page to insert. Δημιουργήστε μια σελίδα για να εισάγετε. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Do you want to continue? Επιλεγμένα: + + TechDrawGui::QGIViewAnnotation + + + Text + Κείμενο + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm index 175c7938fd..c85eec6f9d 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index df617a8682..f7bad8bc56 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Añadir Línea Cosmética a través 2 puntos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insertar anotación @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insertar Línea Central - + Add Centerline to Faces Añadir línea central a las caras @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Eliminar Objeto Cosmético @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Añadir vértice cosmético @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Cambiar el aspecto de las líneas - + Change Appearance of selected Lines Cambiar apariencia de las líneas seleccionadas @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Añadir línea central a las caras @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Aplicar geométrica de rallado a la cara @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Rayar una Cara usando un archivo de imagen @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insertar imagen Bitmap - - + + Insert Bitmap from a file into a page Insertar Bitmap desde un archivo en una página - + Select an Image File Seleccione un archivo de imagen - + Image (*.png *.jpg *.jpeg) Imagen (*.png*.jpg*.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Añadir Vértices de Punto Medio @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Añadir Vértices de Cuadrante @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostrar/Ocultar Bordes Invisibles @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Activar o desactivar la vista marcos @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Agregar Información de Soldadura a la Línea de Referencia @@ -848,7 +848,17 @@ Guardar página como dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Añadir Vértices de Cuadrante + + + Create Annotation Crear Anotación @@ -865,17 +875,17 @@ Crear Cota - + Create Hatch Crear Rayado - + Create GeomHatch Crear GeomHatch - + Create Image Crear imagen @@ -906,7 +916,12 @@ Crear Línea Central - + + Create Cosmetic Line + Crear Línea Cosmética + + + Update CosmeticLine Actualizar Línea Cosmética @@ -965,6 +980,11 @@ Edit WeldSymbol Editar Símbolo de Soldadura + + + Add Cosmetic Vertex + Añadir vértice cosmético + MRichTextEdit @@ -1181,22 +1201,22 @@ Origen del Documento - + Create a link Crear un Enlace - + Link URL: URL de enlace: - + Select an image Seleccionar una imagen - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todo (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selección incorrecta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selección incorrecta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Selección Incorrecta @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Debe seleccionar una vista base para la línea. - + No DrawViewPart objects in this selection No hay objetos DrawViewPart en esta selección - - + + No base View in Selection. No hay Vista base en la selección. - + You must select Faces or an existing CenterLine. Debe seleccionar una(s) cara(s) o una línea central existente. - + No CenterLine in selection. No hay Línea Central en la selección. - - - + + + Selection is not a CenterLine. La selección no es una línea central. - + Selection not understood. Selección no entendida. - + You must select 2 Vertexes or an existing CenterLine. Debe seleccionar 2 Vértices o una Línea Central existente. - + Need 2 Vertices or 1 CenterLine. Necesita 2 vértices o una línea central. - + Selection is empty. La selección está vacía. - + Not enough points in selection. No hay suficientes puntos en la selección. - + Selection is not a Cosmetic Line. La selección no es una Línea Cosmética. - + You must select 2 Vertexes. Debe seleccionar 2 Vértices. - + No View in Selection. No hay Vista en la Selección. - + You must select a View and/or lines. Debe seleccionar una vista y/o líneas. - + No Part Views in this selection No hay Vistas de Piezas en esta selección - + Select exactly one Leader line or one Weld symbol. Seleccione exactamente una Línea de referencia o un símbolo de Soldadura. - - + + Nothing selected Nada seleccionado - + At least 1 object in selection is not a part view Al menos 1 objeto en la selección no es una vista de pieza - + Unknown object type in selection Tipo de objeto desconocido en la selección - + Replace Hatch? ¿Reemplazar rayado? - + Some Faces in selection are already hatched. Replace? Algunas caras en la selección ya están sombreadas. ¿Desea reemplazarlas? - + No TechDraw Page No hay página de TechDraw - + Need a TechDraw Page for this command Necesita una página TechDraw para este comando - + Select a Face first Seleccione primero una cara - + No TechDraw object in selection Ningún objeto TechDraw en la selección - + Create a page to insert. Crear una página para insertar. - - + + No Faces to hatch in this selection No hay caras para sombrear en esta selección @@ -1795,6 +1815,7 @@ Creador de texto enriquecido + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Seleccionado: + + TechDrawGui::QGIViewAnnotation + + + Text + Texto + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Escoge un punto para vértice cosmético - + Left click to set a point Clic izquierdo para establecer un punto - + In progress edit abandoned. Start over. En proceso de edición abandonado. Comenzar de nuevo. @@ -5024,7 +5053,7 @@ usando el Espaciado X/Y dado TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Añade una Línea Central entre 2 Líneas @@ -5032,7 +5061,7 @@ usando el Espaciado X/Y dado TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Añade una Línea Central entre 2 puntos @@ -5048,7 +5077,7 @@ usando el Espaciado X/Y dado TechDraw_FaceCenterLine - + Adds a Centerline to Faces Añade una Línea Central a las Caras diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm index e2f6c45eab..eb13fce700 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 5c58f9d9b9..842304a620 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Gehitu lerro kosmetikoa 2 puntu zeharkatuta @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Txertatu oharpena @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Txertatu erdiko lerroa - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Kendu objektu kosmetikoa @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Gehitu erpin kosmetikoa @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aldatu lerroen itxura - + Change Appearance of selected Lines Aldatu hautatutako lerroen itxura @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Aplikatu itzaleztadura geometrikoa aurpegi bati @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Itzaleztatu aurpegi bat irudi-fitxategi baten bidez @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Txertatu bitmap-irudia - - + + Insert Bitmap from a file into a page Txertatu fitxategi bateko bitmap bat orri batean - + Select an Image File Hautatu irudi-fitxategi bat - + Image (*.png *.jpg *.jpeg) Irudia (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Gehitu koadrante-erpinak @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Erakutsi/ezkutatu ertz ikusezinak @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Aktibatu/desaktibatu bista-markoak @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Gehitu soldadura-informazioa gida-marrari @@ -848,7 +848,17 @@ Gorde orria DXF fitxategi batean - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Gehitu koadrante-erpinak + + + Create Annotation Sortu oharpena @@ -865,17 +875,17 @@ Sortu kota - + Create Hatch Sortu itzaleztadura - + Create GeomHatch Sortu itzaleztadura geometrikoa - + Create Image Sortu irudia @@ -906,7 +916,12 @@ Sortu erdiko lerroa - + + Create Cosmetic Line + Sortu lerro kosmetikoa + + + Update CosmeticLine Eguneratu lerro kosmetikoa @@ -965,6 +980,11 @@ Edit WeldSymbol Editatu soldadura-ikurra + + + Add Cosmetic Vertex + Gehitu erpin kosmetikoa + MRichTextEdit @@ -1181,22 +1201,22 @@ Dokumentu-iturburua - + Create a link Sortu esteka bat - + Link URL: Estekaren URLa: - + Select an image Hautatu irudi bat - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Denak (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Hautapen okerra @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Hautapen okerra @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Hautapen okerra @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Oinarrizko bista bat hautatu behar duzu lerrorako. - + No DrawViewPart objects in this selection Ez dago marrazki-piezaren bistarik hautapen honetan - - + + No base View in Selection. Ez dago oinarri-bistarik hautapenean. - + You must select Faces or an existing CenterLine. Aurpegiak edo lehendik dagoen erdiko lerro bat hautatu behar duzu. - + No CenterLine in selection. Ez dago erdiko lerrorik hautapenean. - - - + + + Selection is not a CenterLine. Hautapena ez da erdiko lerroa. - + Selection not understood. Hautapena ez da ulertzen. - + You must select 2 Vertexes or an existing CenterLine. 2 erpin edo lehendik dagoen erdiko lerro bat hautatu behar duzu. - + Need 2 Vertices or 1 CenterLine. 2 erpin edo erdiko lerro 1 behar da. - + Selection is empty. Hautapena hutsik dago. - + Not enough points in selection. Ez dago nahiko punturik hautapenean. - + Selection is not a Cosmetic Line. Hautapena ez da lerro kosmetikoa. - + You must select 2 Vertexes. Bi erpin hautatu behar dituzu. - + No View in Selection. Ez dago bistarik hautapenean. - + You must select a View and/or lines. Bista bat eta/edo lerroak hautatu behar dituzu. - + No Part Views in this selection Ez dago pieza-bistarik hautapen honetan - + Select exactly one Leader line or one Weld symbol. Hautatu gida-marra bakar bat edo soldadura-ikur bakar bat. - - + + Nothing selected Ez da ezer hautatu - + At least 1 object in selection is not a part view Hautapeneko objektu bat gutxienez ez da pieza-bista bat - + Unknown object type in selection Objektu-forma ezezaguna hautapenean - + Replace Hatch? Ordeztu itzaleztadura? - + Some Faces in selection are already hatched. Replace? Hautapeneko zenbait aurpegi dagoeneko itzaleztatuta daude. Ordeztu? - + No TechDraw Page Ez dago TechDraw orrialderik - + Need a TechDraw Page for this command TechDraw orrialdea behar da komando honetarako - + Select a Face first Hautatu aurpegi bat lehenengo - + No TechDraw object in selection Ez dago TechDraw objekturik hautapenean - + Create a page to insert. Sortu orrialde bat bertan bistak txertatzeko. - - + + No Faces to hatch in this selection Ez dago itzaleztatzeko aurpegirik hautapen honetan @@ -1795,6 +1815,7 @@ Testu aberatsaren sortzailea + Rich text editor @@ -3473,6 +3494,14 @@ Jarraitu nahi duzu? Hautatua: + + TechDrawGui::QGIViewAnnotation + + + Text + Testua + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Jarraitu nahi duzu? Y - + Pick a point for cosmetic vertex Aukeratu puntu bat erpin kosmetikorako - + Left click to set a point Ezkerreko klika puntu bat ezartzeko - + In progress edit abandoned. Start over. Abian dagoen edizioa utzi da. Hasi berriro. @@ -5026,7 +5055,7 @@ emandako X/Y espazioa erabilita TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Erdiko lerro bat gehitzen du 2 lerroren artean @@ -5034,7 +5063,7 @@ emandako X/Y espazioa erabilita TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Erdiko lerro bat gehitzen du 2 punturen artean @@ -5050,7 +5079,7 @@ emandako X/Y espazioa erabilita TechDraw_FaceCenterLine - + Adds a Centerline to Faces Erdiko lerro bat gehitzen die aurpegiei diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm index 650d6a8d2f..4b9f4ac412 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 1ba5555c5e..15ecccd8e7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Lisää keskilinja 2:n viivan väliin @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Lisää keskilinja 2:n pisteen väliin @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Lisää keskilinja 2:n viivan väliin @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Lisää keskilinja 2:n pisteen väliin @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Lisää kosmeettinen viiva 2 pisteen kautta @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Lisää huomautus @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Lisää keskilinja - + Add Centerline to Faces Lisää keskilinja alueisiin @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Poista kosmeettinen objekti @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Lisää kosmeettinen apupiste @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Muuta rivien ulkonäköä - + Change Appearance of selected Lines Muuta valittujen rivien ulkonäköä @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Lisää keskilinja alueisiin @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Tee Alueelle Geometrinen Kuviointi @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Kuvioi Alue käyttäen kuvatiedostoa @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Lisää Bitmap kuva - - + + Insert Bitmap from a file into a page Lisää Bitmap kuva tiedostosta sivulle - + Select an Image File Valitse kuvatiedosto - + Image (*.png *.jpg *.jpeg) Kuva (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Lisää reunoihin keskipisteet @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Lisää kvadranttien pisteet @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Näytä/Piilota näkymättömät reunat @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Näytä kehykset - Käytössä/Pois @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Lisää hitsaustiedot Reittiviivaan @@ -848,7 +848,17 @@ Tallenna sivu dxf: ään - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Lisää kvadranttien pisteet + + + Create Annotation Lisää huomautus @@ -865,17 +875,17 @@ Luo Mitta - + Create Hatch Luo Kuviointi - + Create GeomHatch Luo Geometrinen Kuviointi - + Create Image Luo kuva @@ -906,7 +916,12 @@ Luo Keskilinja - + + Create Cosmetic Line + Luo kosmeettinen viiva + + + Update CosmeticLine Päivitä kosmeettinen viiva @@ -965,6 +980,11 @@ Edit WeldSymbol Muokkaa WeldSymbolia + + + Add Cosmetic Vertex + Lisää kosmeettinen apupiste + MRichTextEdit @@ -1181,22 +1201,22 @@ Dokumentin lähdekoodi - + Create a link Luo linkki - + Link URL: Linkin URL: - + Select an image Valitse kuvatiedosto - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG-(*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Kaikki (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Virheellinen valinta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Virheellinen valinta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Väärä valinta @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Jokin Perusnäkymä pitää valita viivan kiinnitystä varten. - + No DrawViewPart objects in this selection Valinnassa ei ole DrawViewPart-tyyppistä objektia - - + + No base View in Selection. Valintaan ei kuulu pohjanäkymää. - + You must select Faces or an existing CenterLine. On valittava joko alue tai olemassaoleva keskilinja. - + No CenterLine in selection. Valintaan ei kuulu Keskilinjaa. - - - + + + Selection is not a CenterLine. Valinta ei ole Keskilinja. - + Selection not understood. Valintajoukko on käsittämätön. - + You must select 2 Vertexes or an existing CenterLine. On valittava joko 2 pistettä tai olemassaoleva keskilinja. - + Need 2 Vertices or 1 CenterLine. Tarvitaan 2 pistettä tai 1 keskilinja. - + Selection is empty. Mitään ei ole valittu. - + Not enough points in selection. Ei tarpeeksi pisteitä valinnassa. - + Selection is not a Cosmetic Line. Valinta ei ole kosmeettinen viiva. - + You must select 2 Vertexes. Ensin pitää valita 2 pistettä. - + No View in Selection. Valittuna ei ole Näkymää. - + You must select a View and/or lines. Ensin pitää valita Näkymä ja/tai viivoja. - + No Part Views in this selection Valinnassa ei ole Näkymää osista - + Select exactly one Leader line or one Weld symbol. Valitse tämälleen yksi Reittiviiva tai yksi Hitsaussymboli. - - + + Nothing selected Mitään ei ole valittu - + At least 1 object in selection is not a part view Vähintään yksi valituista objekteista ei ole näkymä osista - + Unknown object type in selection Valittuna on tyypiltään tuntematon objekti - + Replace Hatch? Korvataanko Kuviointi? - + Some Faces in selection are already hatched. Replace? Jotkut valitut Alueet on jo Kuvioitu. Korvataanko ne? - + No TechDraw Page TechDraw-sivua ei ole - + Need a TechDraw Page for this command Tätä komentoa varten tarvitaan TechDraw-sivu - + Select a Face first Valitse ensin Alue - + No TechDraw object in selection TechDraw-objektia ei ole valittuna - + Create a page to insert. Luo sivu kuvien lisäämistä varten. - - + + No Faces to hatch in this selection Valinnassa ei ole Aluetta kuvioitavaksi @@ -1795,6 +1815,7 @@ RTF-tekstin luonti + Rich text editor @@ -3466,6 +3487,14 @@ Haluatko jatkaa? Valittu: + + TechDrawGui::QGIViewAnnotation + + + Text + Teksti + + TechDrawGui::SymbolChooser @@ -3824,17 +3853,17 @@ Haluatko jatkaa? Y - + Pick a point for cosmetic vertex Valitse paikka kosmeettiselle apupisteelle - + Left click to set a point Aseta piste napsauttamalla vasemmalla painikkeella - + In progress edit abandoned. Start over. Käynnissä ollut muokkaus hylättiin. Aloita alusta. @@ -5016,7 +5045,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Lisää keskilinjan kahden viivan väliin @@ -5024,7 +5053,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Lisää keskilinjan 2:n pisteen väliin @@ -5040,7 +5069,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_FaceCenterLine - + Adds a Centerline to Faces Lisää keskilinjan alueisiin diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm index db8babc362..ca840ee11b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts index ed8877d2bb..0b204647f7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Ilapat ang Geometric Hatch sa harap @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Pumili ng isang File ng Larawan - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Maling Pagpipilian @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Maling pagpili @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Walang TechDraw pahina - + Need a TechDraw Page for this command Kailangan mo ng Pahina ng TechDraw para sa utos na ito - + Select a Face first Pumili ng isang harapan muna - + No TechDraw object in selection Walang bagay sa TechDraw sa pagpili - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3474,6 +3495,14 @@ Gusto mong magpatuloy? Hinirang: + + TechDrawGui::QGIViewAnnotation + + + Text + Letra + + TechDrawGui::SymbolChooser @@ -3833,17 +3862,17 @@ Taluhaba Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5028,7 +5057,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5036,7 +5065,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5052,7 +5081,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index 569b6d0c87..658407334a 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 09d430ce6a..a75f294a23 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Ajouter une ligne de centre entre 2 points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Ajouter une ligne de centre entre 2 points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Ajouter une ligne cosmétique par 2 points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insérer une annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insérer une ligne centrale - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Supprimer l'objet cosmétique @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Ajouter un sommet cosmétique @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Changer l'apparence des lignes - + Change Appearance of selected Lines Changer l'apparence des lignes sélectionnées @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Appliquer un motif de hachure géométrique à une face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hachurer une face en utilisant un fichier image @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insérer une image Bitmap - - + + Insert Bitmap from a file into a page Insérer un Bitmap depuis un fichier dans une page - + Select an Image File Sélectionner un fichier image - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg, *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Ajouter des sommets de points médians @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Ajouter des sommets de quadrants @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Afficher/Masquer les arrêtes cachées @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Activer ou désactiver les cadres de vues @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Ajouter les informations de soudage à la ligne de référence @@ -848,7 +848,17 @@ Enregistrer la page en dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Ajouter des sommets de quadrants + + + Create Annotation Créer une annotation @@ -865,17 +875,17 @@ Créer une cote - + Create Hatch Créer une zone hachurée - + Create GeomHatch Créer des hachures géométriques - + Create Image Créer image @@ -906,7 +916,12 @@ Créer une trait d'axe - + + Create Cosmetic Line + Créer une ligne cosmétique + + + Update CosmeticLine Mettre à jour CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Modifier le symbole de soudage + + + Add Cosmetic Vertex + Ajouter un sommet cosmétique + MRichTextEdit @@ -1181,22 +1201,22 @@ Source du document - + Create a link Créer un lien - + Link URL: URL du lien : - + Select an image Sélectionner une image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tous (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1345,8 +1365,8 @@ - - + + Incorrect Selection Sélection non valide @@ -1432,9 +1452,9 @@ - - - + + + Incorrect selection Sélection non valide @@ -1471,18 +1491,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1493,18 +1513,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1522,27 +1542,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Sélection incorrecte @@ -1553,152 +1573,152 @@ - - - + + + You must select a base View for the line. Vous devez sélectionner une vue de base pour la ligne. - + No DrawViewPart objects in this selection Aucun objet DrawViewPart dans cette sélection - - + + No base View in Selection. Aucune Vue de base dans la sélection. - + You must select Faces or an existing CenterLine. Vous devez sélectionner des faces ou une ligne centrale existante. - + No CenterLine in selection. Pas de ligne centrale dans la sélection. - - - + + + Selection is not a CenterLine. La sélection n'est pas une ligne centrale. - + Selection not understood. Sélection non comprise. - + You must select 2 Vertexes or an existing CenterLine. Vous devez sélectionner 2 sommets ou une ligne centrale existante. - + Need 2 Vertices or 1 CenterLine. Exige 2 sommets ou 1 ligne centrale. - + Selection is empty. La sélection est vide. - + Not enough points in selection. Pas assez de points dans la sélection. - + Selection is not a Cosmetic Line. La sélection n'est pas une ligne cosmétique. - + You must select 2 Vertexes. Vous devez sélectionner 2 sommets. - + No View in Selection. Aucune vue dans la sélection. - + You must select a View and/or lines. Vous devez sélectionner une vue et/ou des lignes. - + No Part Views in this selection Pas de vue dans la sélection - + Select exactly one Leader line or one Weld symbol. Sélectionnez exactement une ligne de repère ou un symbole de soudure. - - + + Nothing selected Aucune sélection - + At least 1 object in selection is not a part view Au moins 1 objet dans la sélection n'est pas une vue de pièce - + Unknown object type in selection Type d'objet inconnu dans la sélection - + Replace Hatch? Remplacer la hachure ? - + Some Faces in selection are already hatched. Replace? Certaines faces dans la sélection sont déjà hachurées. Remplacer ? - + No TechDraw Page Aucune Page TechDraw - + Need a TechDraw Page for this command Une Page TechDraw est requise pour cette commande - + Select a Face first Sélectionnez d'abord une face - + No TechDraw object in selection Aucun objet TechDraw dans la sélection - + Create a page to insert. Créer une page à insérer. - - + + No Faces to hatch in this selection Pas de faces à hachurer dans la sélection @@ -1796,6 +1816,7 @@ Créateur de texte enrichi + Rich text editor @@ -3465,6 +3486,14 @@ Do you want to continue? Sélectionné: + + TechDrawGui::QGIViewAnnotation + + + Text + Texte + + TechDrawGui::SymbolChooser @@ -3823,17 +3852,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Choisissez un point pour le sommet cosmétique - + Left click to set a point Clic gauche pour définir un point - + In progress edit abandoned. Start over. Modification en cours abandonnée. Recommencer. @@ -5020,7 +5049,7 @@ en utilisant l'espacement X/Y donné TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -5028,7 +5057,7 @@ en utilisant l'espacement X/Y donné TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Ajoute une ligne centrale entre 2 points @@ -5044,7 +5073,7 @@ en utilisant l'espacement X/Y donné TechDraw_FaceCenterLine - + Adds a Centerline to Faces Ajoute une Ligne Centrale aux faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm index 5e27b76278..869fbaddaf 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index 593eed0b59..2da8323d4b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insire apuntamento @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Aplicar Xeometría de Raiado da Cara @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Seleciona un Arquivo Imaxe - + Image (*.png *.jpg *.jpeg) Imaxe (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Activa ou desactiva a Vista de Estruturas @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Fonte do documento - + Create a link Crear unha ligazón - + Link URL: Ligazón URL: - + Select an image Escolmar unha imaxe - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todo (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selección Incorrecta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selección incorrecta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Debes escolmar unha Vista base para a liña. - + No DrawViewPart objects in this selection Sen obxectos DrawViewPart na escolma - - + + No base View in Selection. Sen Vista base na Selección. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nada escolmado - + At least 1 object in selection is not a part view Ao menos 1 obxecto da escolma non é unha vista parcial - + Unknown object type in selection Tipo de obxecto descoñecido na escolma - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Ningunha páxina TechDraw - + Need a TechDraw Page for this command Necesita Páxina TechDraw para este comando - + Select a Face first Escolma primeiro unha Cara - + No TechDraw object in selection Sen obxecto TechDraw en selección - + Create a page to insert. Crea unha páxina a insire. - - + + No Faces to hatch in this selection Sen Faces a raiar na selección @@ -1795,6 +1815,7 @@ Creador de texto enriquecido + Rich text editor @@ -3473,6 +3494,14 @@ Quere seguir? Escolmado: + + TechDrawGui::QGIViewAnnotation + + + Text + Texto + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Quere seguir? Y - + Pick a point for cosmetic vertex Recoller un punto para vértice cosmético - + Left click to set a point Preme botón esquerdo para definir un punto - + In progress edit abandoned. Start over. En proceso edición abandonada. Inicia de novo. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm index b0ff006a20..515afa44bc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 3dc44ec206..a26a8930df 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Tehničko Crtanje - + Add Cosmetic Line Through 2 Points Dodaj dekoracijsku liniju kroz 2 točke @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Tehničko Crtanje - + Insert Annotation Umetanje napomene @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Tehničko Crtanje - + Insert Center Line Umetnite središnju liniju - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Tehničko Crtanje - + Remove Cosmetic Object Ukloni pomoćni objekt @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Tehničko Crtanje - + Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Tehničko Crtanje - + Change Appearance of Lines Promijenite izgled linija - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Tehničko Crtanje - + Apply Geometric Hatch to Face Dodaje šrafuru na naličje @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Tehničko Crtanje - + Hatch a Face using Image File Šrafiraj naličje koristeći datoteku slike @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Tehničko Crtanje - + Insert Bitmap Image Umetni Bitmap sliku - - + + Insert Bitmap from a file into a page Umeće bitmapu iz datoteke u stranicu - + Select an Image File Odaberite slikovnu datoteku - + Image (*.png *.jpg *.jpeg) Slika (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Tehničko Crtanje - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Tehničko Crtanje - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Tehničko Crtanje - + Show/Hide Invisible Edges Prikaži / sakrij nevidljive rubove @@ -722,13 +722,13 @@ CmdTechDrawToggleFrame - + TechDraw Tehničko Crtanje - - + + Turn View Frames On/Off Prebacuj Okvire Pogled Uključeno/Isključeno @@ -780,12 +780,12 @@ CmdTechDrawWeldSymbol - + TechDraw Tehničko Crtanje - + Add Welding Information to Leaderline Dodaj informaciju spajanja na liniju oznake @@ -850,7 +850,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Dodajte kvadrantne pomoćne točke na rubove + + + Create Annotation Create Annotation @@ -867,17 +877,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -908,7 +918,12 @@ Create CenterLine - + + Create Cosmetic Line + Stvori Dekoracijsku liniju + + + Update CosmeticLine Update CosmeticLine @@ -967,6 +982,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Dodaj pomoćnu tjemenu točku + MRichTextEdit @@ -1183,22 +1203,22 @@ Izvor dokumenta - + Create a link Stvorite poveznicu - + Link URL: URL poveznice: - + Select an image Odaberite sliku - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Sve (*) @@ -1222,13 +1242,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1347,8 +1367,8 @@ - - + + Incorrect Selection Netočan odabir @@ -1434,9 +1454,9 @@ - - - + + + Incorrect selection Netočan odabir @@ -1473,18 +1493,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1495,18 +1515,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1524,27 +1544,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Pogrešan odabir @@ -1555,153 +1575,153 @@ - - - + + + You must select a base View for the line. Morate odabrati osnovni prikaz za redak. - + No DrawViewPart objects in this selection Nema DrawViewPart objekata u ovom odabiru - - + + No base View in Selection. Nema osnovnog pogleda u odabiru. - + You must select Faces or an existing CenterLine. Morate odabrati Lica ili postojeću Srednju liniju. - + No CenterLine in selection. Nema Srednje linije u odabiru. - - - + + + Selection is not a CenterLine. Odabir nije Srednja linija. - + Selection not understood. Odabir nije razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Morate odabrati 2 tjemene točke ili postojeću Srednju liniju. - + Need 2 Vertices or 1 CenterLine. Potrebna su 2 Vrha ili 1 Srednja linija - + Selection is empty. Odabir je prazan. - + Not enough points in selection. Nema dovoljno točaka u odabiru. - + Selection is not a Cosmetic Line. Odabir nije Dekoracijska linija - + You must select 2 Vertexes. Morate odabrati 2 tjemene točke. - + No View in Selection. Nema pogleda u odabiru. - + You must select a View and/or lines. Morate odabrati jedan Pogled i / ili linije. - + No Part Views in this selection Nema Pogleda djelova u ovom odabiru - + Select exactly one Leader line or one Weld symbol. Odaberite samo jednu liniju oznake ili simbol spajanja. - - + + Nothing selected Ništa nije odabrano - + At least 1 object in selection is not a part view Najmanje 1 predmet u odabiru nije Prikaz dijelova - + Unknown object type in selection Nepoznata vrsta objekta u izboru - + Replace Hatch? Zamijeni šrafiranje? - + Some Faces in selection are already hatched. Replace? Neka su lica u odabiru već šrafirana. Zamijeniti? - + No TechDraw Page Nema stranice za tehničko crtanje - + Need a TechDraw Page for this command Potreban je stranicu tehničko crtanje za ovu naredbu - + Select a Face first Odaberite prvo naličje - + No TechDraw object in selection Nema objekta tehničkog crtanja u odabiru - + Create a page to insert. Stvaranje stranica za umetanje. - - + + No Faces to hatch in this selection Nema lica za šrafiranje u ovom odabiru @@ -1799,6 +1819,7 @@ Rich-Text stvaralac + Rich text editor @@ -3537,6 +3558,14 @@ Do you want to continue? Odabrane: + + TechDrawGui::QGIViewAnnotation + + + Text + Tekst + + TechDrawGui::SymbolChooser @@ -3899,17 +3928,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Odaberite mjesto za pomoćnu tjemenu točku - + Left click to set a point Lijevi klik za postavljanje točke - + In progress edit abandoned. Start over. Uređivanje napušteno. Početi ispočetka. @@ -5099,7 +5128,7 @@ koristeći zadani X/Y razmak TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -5107,7 +5136,7 @@ koristeći zadani X/Y razmak TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -5123,7 +5152,7 @@ koristeći zadani X/Y razmak TechDraw_FaceCenterLine - + Adds a Centerline to Faces Dodaj simetralu na lice(a) diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm index 4f133f515d..cdc4a3b405 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index 97546e599d..713bc6817d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Középvonal hozzáadása 2 egyenes között @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Középvonal hozzáadása 2 pont között @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Lines Középvonal hozzáadása 2 egyenes között @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Points Középvonal hozzáadása 2 pont között @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw MűszakiRajz - + Add Cosmetic Line Through 2 Points Két pont általi kozmetikai vonal beszúrása @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw MűszakiRajz - + Insert Annotation Széljegyzet beszúrása @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw MűszakiRajz - + Insert Center Line Középvonal beszúrása - + Add Centerline to Faces Középvonal hozzáadása a felületekhez @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw MűszakiRajz - + Remove Cosmetic Object Kozmetikai objektum eltávolítása @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw MűszakiRajz - + Add Cosmetic Vertex Kozmetikai csúcspont hozzáadása @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw MűszakiRajz - + Change Appearance of Lines Egyenesek megjelenésének módosítása - + Change Appearance of selected Lines Kiválasztott egyenesek megjelenésének módosítása @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw MűszakiRajz - + Add Centerline to Faces Középvonal hozzáadása a felületekhez @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw MűszakiRajz - + Apply Geometric Hatch to Face Geometriai sraffozó kitöltés alkalmazása a felületre @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw MűszakiRajz - + Hatch a Face using Image File Felület sraffozása képfájllal @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw MűszakiRajz - + Insert Bitmap Image Bitkép beillesztése - - + + Insert Bitmap from a file into a page Bitkép beszúrása az oldalra egy fájlból - + Select an Image File Válasszon ki egy kép fájlt - + Image (*.png *.jpg *.jpeg) Kép (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw MűszakiRajz - + Add Midpoint Vertices Középponti csúcspontok hozzáadása @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw MűszakiRajz - + Add Quadrant Vertices Negyedelő csúcspontok hozzáadása @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw MűszakiRajz - + Show/Hide Invisible Edges Láthatatlan élek megjelenítése/elrejtése @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw MűszakiRajz - - + + Turn View Frames On/Off Keretek nézetének be-/kikapcsolása @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw MűszakiRajz - + Add Welding Information to Leaderline Hegesztési információk hozzáadása a Vezérvonalhoz @@ -848,7 +848,17 @@ Oldal mentése dxf-be - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Negyedelő csúcspontok hozzáadása + + + Create Annotation Széljegyzet létrehozása @@ -865,17 +875,17 @@ Méret létrehozása - + Create Hatch Kitöltés létrehozása - + Create GeomHatch Geometriai nyílás létrehozása - + Create Image Kép létrehozás @@ -906,7 +916,12 @@ Középvonal létrehozása - + + Create Cosmetic Line + Segédvonal létrehozása + + + Update CosmeticLine Segédvonalak aktualizálása @@ -965,6 +980,11 @@ Edit WeldSymbol Hegesztési szimbólum szerkesztése + + + Add Cosmetic Vertex + Kozmetikai csúcspont hozzáadása + MRichTextEdit @@ -1181,22 +1201,22 @@ Dokumentumforrás - + Create a link Létrehoz egy hivatkozást - + Link URL: Hivatkozás webcíme: - + Select an image Válasszon ki egy képet - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Összes (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Hibás kijelölés @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Hibás kijelölés @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Hibás kijelölés @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Alapértelmezett nézetet kell kiválasztania az egyeneshez. - + No DrawViewPart objects in this selection A kijelölt részen nem található DrawViewPart objektum - - + + No base View in Selection. Nincs alapnézet a kijelölésben. - + You must select Faces or an existing CenterLine. Ki kell választania a felületeket vagy egy meglévő Középvonalat. - + No CenterLine in selection. Középvonal nincs a kiválasztásban. - - - + + + Selection is not a CenterLine. A kijelölés nem középvonal. - + Selection not understood. A kiválasztás nem érthető. - + You must select 2 Vertexes or an existing CenterLine. Ki kell jelölnie a 2 csúcspontot vagy egy meglévő Középvonalat. - + Need 2 Vertices or 1 CenterLine. Szüksége van 2 csúcsora vagy 1 Középvonalra. - + Selection is empty. Nincs kiválasztva semmi. - + Not enough points in selection. Nincs elég pont a kiválasztásban. - + Selection is not a Cosmetic Line. A kiválasztás nem kozmetikázó vonal. - + You must select 2 Vertexes. Két csúcspontot kell kijelölnie. - + No View in Selection. Nincs alapnézet a kijelölésben. - + You must select a View and/or lines. Ki kell jelölnie egy nézetet és/vagy vonalakat. - + No Part Views in this selection Nincs résznézet ebben a kijelölésben - + Select exactly one Leader line or one Weld symbol. Jelöljön ki pontosan egy Vezető vonalat vagy egy Hegesztés szimbólumot. - - + + Nothing selected Semmi sincs kiválasztva - + At least 1 object in selection is not a part view Legalább 1 objektum a kijelölt részen nem egy résznézet - + Unknown object type in selection Ismeretlen típusú tárgy a kiválasztásban - + Replace Hatch? Kitöltés lecserélése? - + Some Faces in selection are already hatched. Replace? Néhány felület a kijelölésben már ki van töltve. Lecseréli? - + No TechDraw Page Nincs MűszakiRajz oldal - + Need a TechDraw Page for this command Szükséges egy MűszakiRajz oldal ehhez a parancshoz - + Select a Face first Először jelöljön ki egy felületet - + No TechDraw object in selection Nincs MűszakiRajz tárgy a kiválasztásban - + Create a page to insert. Oldal létrehozása a beillesztéshez. - - + + No Faces to hatch in this selection Nincs felület a straffozáshoz ebben a kijelölésben @@ -1795,6 +1815,7 @@ Szöveg szerkesztő + Rich text editor @@ -2255,42 +2276,42 @@ Ezután növelnie kell a csempe határértékét. Dump intermediate results during Detail view processing - Dump intermediate results during Detail view processing + Köztes eredmények dömpingje a Részletgazdagság feldolgozása során Debug Detail - Debug Detail + Hibaelhárítás és tisztítás részletei Include 2D Objects in projection - Include 2D Objects in projection + 2D tárgyak felvétele a vetítésbe Show Loose 2D Geom - Show Loose 2D Geom + Laza 2D geometria megjelenítése Dump intermediate results during Section view processing - Dump intermediate results during Section view processing + Köztes eredmények dömpingje a szakasznézet feldolgozása során Debug Section - Debug Section + Szakasz hibaelhárítás és tisztítás Perform a fuse operation on input shape(s) before Section view processing - Perform a fuse operation on input shape(s) before Section view processing + Biztosítékművelet végrehajtása bemeneti alakzat(ok)on a Szakasz nézetfeldolgozása előtt Fuse Before Section - Fuse Before Section + Csatlakoztatás a vágás előtt @@ -2300,7 +2321,7 @@ Ezután növelnie kell a csempe határértékét. Show Section Edges - Show Section Edges + Mutassa meg a zekcióéleket @@ -3472,6 +3493,14 @@ Szeretné folytatni? Kiválasztott: + + TechDrawGui::QGIViewAnnotation + + + Text + Szöveg + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Szeretné folytatni? Y - + Pick a point for cosmetic vertex Pontot választ egy szépítő csúcshoz - + Left click to set a point Bal klikk pont meghatározásához - + In progress edit abandoned. Start over. Folyamatban lévő szerkesztés megszakítva. Kezdje újra. @@ -5025,7 +5054,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5033,7 +5062,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5049,7 +5078,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm index a0953f1c11..271f82a25f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index de51db9a10..799d75bc41 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Tambah Garis tengah antara 2 Garis @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Tambah Garis tengah antara 2 Titik @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Tambah Garis tengah antara 2 Garis @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Tambah Garis tengah antara 2 Titik @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Tambahkan Garis Kosmetik Melalui 2 Titik @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Masukkan Anotasi @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Masukkan Garis Tengah - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Hapus Obyek Kosmetik @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Tambahkan Vertex Kosmetik @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Ubah Tampilan Garis - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Terapkan Menetuk Geometrik ke Wajah @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Arsir Bidang menggunakan File Gambar @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Masukan Gambar Bitmap - - + + Insert Bitmap from a file into a page Masukkan Bitmap dari file ke halaman - + Select an Image File Pilih File Gambar - + Image (*.png *.jpg *.jpeg) Gambar (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Tambahkan Vertis Titik-tengah @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Tambahkan Vertis Kuadran @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Tampilkan/Sembuyikan Tepi Tak Terlihat @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Hidup/Matikan View Frames @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Tambahkan Vertis Kuadran + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Tambahkan Vertex Kosmetik + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Pilih gambar - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Semua (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Seleksi yang salah @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Pilihan salah @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Tak ada yang dipilih - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Tidak ada teknik menggambar - + Need a TechDraw Page for this command Butuh Halaman TechDraw untuk perintah ini - + Select a Face first Pilih Wajah dulu - + No TechDraw object in selection Tidak ada objek TechDraw dalam seleksi - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Terpilih: + + TechDrawGui::QGIViewAnnotation + + + Text + Teks + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm index 6584e2683c..9282be87d9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index f7879047e5..c03c864b98 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Linea centrale a 2 punti @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Linea centrale a 2 punti @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Linea attraverso 2 punti @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Annotazione @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Inserisci linea centrale - + Add Centerline to Faces Linea a centro faccia @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Rimuovi oggetto cosmetico @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Vertice cosmetico @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aspetto delle linee - + Change Appearance of selected Lines Cambia l'aspetto delle linee selezionate @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Linea a centro faccia @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Tratteggio geometrico @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Riempi una faccia utilizzando un file di immagine @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Immagine bitmap - - + + Insert Bitmap from a file into a page Inserisce un'immagine bitmap da un file in una pagina - + Select an Image File Selezionare un file di immagine - + Image (*.png *.jpg *.jpeg) Immagine (*. png *. jpg *. jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Vertice nel punto mediano @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Vertici quadrante @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/nascondi i bordi invisibili @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Attiva o disattiva la vista cornici @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Informazioni di saldatura @@ -848,7 +848,17 @@ Salva pagina su dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Vertici quadrante + + + Create Annotation Crea annotazione @@ -865,17 +875,17 @@ Crea quota - + Create Hatch Crea tratteggio - + Create GeomHatch Crea tratteggio geometrico - + Create Image Crea immagine @@ -906,7 +916,12 @@ Crea linea di mezzeria - + + Create Cosmetic Line + Crea linea cosmetica + + + Update CosmeticLine Aggiorna linea cosmetica @@ -965,6 +980,11 @@ Edit WeldSymbol Modifica simbolo di saldatura + + + Add Cosmetic Vertex + Vertice cosmetico + MRichTextEdit @@ -1181,22 +1201,22 @@ Sorgente documento - + Create a link Crea un link - + Link URL: URL link: - + Select an image Seleziona un'immagine - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tutti (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selezione non corretta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selezione non corretta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Selezione sbagliata @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Selezionare una vista base per la linea. - + No DrawViewPart objects in this selection Nessun oggetto DrawViewPart in questa selezione - - + + No base View in Selection. Nessuna Vista di base nella selezione. - + You must select Faces or an existing CenterLine. Selezionare le facce o una linea centrale esistente. - + No CenterLine in selection. Nessuna linea centrale nella selezione. - - - + + + Selection is not a CenterLine. La selezione non è una linea centrale. - + Selection not understood. Selezione non compresa. - + You must select 2 Vertexes or an existing CenterLine. Selezionare 2 vertici o una linea centrale esistente. - + Need 2 Vertices or 1 CenterLine. Servono 2 vertici o 1 linea centrale. - + Selection is empty. La selezione è vuota. - + Not enough points in selection. Non ci sono abbastanza punti nella selezione. - + Selection is not a Cosmetic Line. La selezione non è una linea cosmetica. - + You must select 2 Vertexes. È necessario selezionare 2 vertici. - + No View in Selection. Nessuna vista nella selezione. - + You must select a View and/or lines. Selezionare una vista e/o delle linee. - + No Part Views in this selection Nessuna vista parte in questa selezione - + Select exactly one Leader line or one Weld symbol. Seleziona solo una linea guida o un simbolo di saldatura. - - + + Nothing selected Nessuna selezione - + At least 1 object in selection is not a part view Almeno 1 oggetto nella selezione non è una vista parte - + Unknown object type in selection Tipo di oggetto sconosciuto nella selezione - + Replace Hatch? Sostituire il tratteggio? - + Some Faces in selection are already hatched. Replace? Alcune facce selezionate sono già tratteggiate. Sostituire? - + No TechDraw Page Nessuna pagina di TechDraw - + Need a TechDraw Page for this command Per questo comando serve una Pagina di TechDraw - + Select a Face first Prima selezionare una faccia - + No TechDraw object in selection Nessun oggetto TechDraw nella selezione - + Create a page to insert. Crea una pagina da inserire. - - + + No Faces to hatch in this selection In questa selezione non c'è nessuna faccia da trattegggiare @@ -1795,6 +1815,7 @@ Creatore di testi avanzato RTF + Rich text editor @@ -3470,6 +3491,14 @@ Do you want to continue? Selezionato: + + TechDrawGui::QGIViewAnnotation + + + Text + Testo + + TechDrawGui::SymbolChooser @@ -3828,17 +3857,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Scegliere un punto per il vertice cosmetico - + Left click to set a point Click sinistro per impostare un punto - + In progress edit abandoned. Start over. Modifica in corso abbandonata. Ricominciare. @@ -5022,7 +5051,7 @@ usando la spaziatura X/Y specificata TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Aggiunge una linea centrale tra 2 linee @@ -5030,7 +5059,7 @@ usando la spaziatura X/Y specificata TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Aggiunge una linea centrale tra 2 punti @@ -5046,7 +5075,7 @@ usando la spaziatura X/Y specificata TechDraw_FaceCenterLine - + Adds a Centerline to Faces Linea a centro faccia diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm index 01b0bec021..7a6f265197 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index a74f7a6d3c..c088782bad 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 2点間に中心線を追加 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 2点間に中心線を追加 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points 2点を通過する表示用の線を追加 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 注釈を挿入 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line 中心線を挿入 - + Add Centerline to Faces 面に中心線を追加 @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object 表示用オブジェクトを削除 @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex 表示用の頂点を追加 @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines 線の表示を変更 - + Change Appearance of selected Lines 選択した線の表示を変更 @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces 面に中心線を追加 @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face 面に幾何学的ハッチングを適用 @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File 画像ファイルを使用して面をハッチング @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image ビットマップ画像を挿入 - - + + Insert Bitmap from a file into a page ページにファイルからビットマップを挿入 - + Select an Image File 画像ファイルを選択 - + Image (*.png *.jpg *.jpeg) 画像 (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 中点を追加 @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 四分点を追加 @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges 見えないエッジの表示/非表示 @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off ビューフレームのオン・オフを切り替え @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline 溶接情報を引き出し線に追加 @@ -848,7 +848,17 @@ ページをDXFに保存 - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + 四分点を追加 + + + Create Annotation 注釈を作成 @@ -865,17 +875,17 @@ 寸法を作成 - + Create Hatch ハッチングを作成 - + Create GeomHatch 幾何ハッチングを作成 - + Create Image 画像を作成 @@ -906,7 +916,12 @@ 中心線を作成 - + + Create Cosmetic Line + 表示用の線を作成 + + + Update CosmeticLine 表示用の線を更新 @@ -965,6 +980,11 @@ Edit WeldSymbol 溶接記号を編集 + + + Add Cosmetic Vertex + 表示用の頂点を追加 + MRichTextEdit @@ -1181,22 +1201,22 @@ ドキュメント ソース - + Create a link リンクを作成 - + Link URL: リンク先のURL: - + Select an image 画像を選択 - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; すべてのファイル (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection 誤った選択です。 @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection 誤った選択です。 @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection 間違った選択 @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. 線のためのベースビューを選択する必要があります。 - + No DrawViewPart objects in this selection DrawViewPartオブジェクトが選択されていません。 - - + + No base View in Selection. ベースビューが選択されていません。 - + You must select Faces or an existing CenterLine. 面または既存の中心線を選択する必要があります。 - + No CenterLine in selection. 中心線が選択されていません。 - - - + + + Selection is not a CenterLine. 選択されているのは中心線ではありません。 - + Selection not understood. 選択範囲が理解できません - + You must select 2 Vertexes or an existing CenterLine. 2頂点または既存の中心線を選択する必要があります。 - + Need 2 Vertices or 1 CenterLine. 2頂点または1本の中心線が必要です。 - + Selection is empty. 選択がされていません。 - + Not enough points in selection. 選択点が足りません。 - + Selection is not a Cosmetic Line. 選択されているのは表示用の線ではありません。 - + You must select 2 Vertexes. 2頂点を選択してください。 - + No View in Selection. 選択範囲にビューがありません。 - + You must select a View and/or lines. ビューおよび/または行を選択する必要があります。 - + No Part Views in this selection パートビューが選択されていません - + Select exactly one Leader line or one Weld symbol. 引き出し線または溶接シンボルを一つだけ選択して下さい。 - - + + Nothing selected 何も選択されていません - + At least 1 object in selection is not a part view 選択されているオブジェクトの少なくとも1つがパートビューではありません - + Unknown object type in selection 選択されているのは不明なオブジェクトタイプです - + Replace Hatch? ハッチングを置き換えますか？ - + Some Faces in selection are already hatched. Replace? 選択中の面はすでにハッチングされています。置き換えしますか？ - + No TechDraw Page TechDrawページがありません。 - + Need a TechDraw Page for this command このコマンドにはTechDrawページが必要です。 - + Select a Face first 最初に面を選択してください - + No TechDraw object in selection 選択対象にTechDrawオブジェクトが含まれていません。 - + Create a page to insert. 挿入するページを作成 - - + + No Faces to hatch in this selection このセクションにはハッチングをする面がありません。 @@ -1795,6 +1815,7 @@ リッチテキストクリエイター + Rich text editor @@ -3462,6 +3483,14 @@ Do you want to continue? 選択: + + TechDrawGui::QGIViewAnnotation + + + Text + テキスト + + TechDrawGui::SymbolChooser @@ -3819,17 +3848,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex 表示用頂点のために点をピック - + Left click to set a point 左クリックで点を設定 - + In progress edit abandoned. Start over. 処理中の編集を破棄しました。やり直してください。 @@ -5009,7 +5038,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 2直線間に中心線を追加 @@ -5017,7 +5046,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 2点間に中心線を追加 @@ -5033,7 +5062,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces 面に中心線を追加 diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm index 85d376511d..0ddf9d1d3b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts index 205ba7a965..0adaccfd8e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_kab.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Select an Image File - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Sélectionné: + + TechDrawGui::QGIViewAnnotation + + + Text + Aḍris + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm index f60815c515..b549fb490b 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index 8ffa3fb1d7..9b47780d1f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 두 선 사이에 중심선 추가 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 두 점 사이에 중심선 추가 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 두 선 사이에 중심선 추가 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 두 점 사이에 중심선 추가 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Select an Image File - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 중간점 정점 추가 @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 사분원 정점 추가 @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + 사분원 정점 추가 + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3426,7 +3447,7 @@ Fast, but result is a collection of short straight lines. Different orientation - Different orientation + 다른 방향 @@ -3472,6 +3493,14 @@ Do you want to continue? 선택: + + TechDrawGui::QGIViewAnnotation + + + Text + 텍스트 + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -4566,12 +4595,12 @@ You can pick further points to get line segments. First Angle - First Angle + 첫 번째 각도 Third Angle - Third Angle + 세 번째 각도 @@ -5025,7 +5054,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5033,7 +5062,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5049,7 +5078,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm index 6c39a7918a..aa21d976d5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts index 07e5056edd..682de6c5b7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Techniniai brėžiniai - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Techniniai brėžiniai - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Techniniai brėžiniai - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Techniniai brėžiniai - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Techniniai brėžiniai - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Techniniai brėžiniai - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Techniniai brėžiniai - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Techniniai brėžiniai - + Apply Geometric Hatch to Face Taikyti geometrinį brūkšniavimą sienai @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Techniniai brėžiniai - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Techniniai brėžiniai - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Pasirinkti paveiksliuko rinkmeną - + Image (*.png *.jpg *.jpeg) Vaizdas (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Techniniai brėžiniai - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Techniniai brėžiniai - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Techniniai brėžiniai - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Techniniai brėžiniai - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Techniniai brėžiniai - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Netinkamas pasirinkimas @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Netinkamas pasirinkimas @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Pasirinktas: + + TechDrawGui::QGIViewAnnotation + + + Text + Tekstas + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm index 0e2a9d9168..d1ec8e74ee 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 1fefe68cf4..1eab97b366 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Voeg symbolische Lijn Door 2 Punten @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Voeg een annotatie in @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Voeg een middenlijn in - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Verwijder cosmetisch object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Verander uiterlijk van de lijnen - + Change Appearance of selected Lines Wijzig uiterlijk van geselecteerde lijnen @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Pas de geometrische arcering toe op een vlak @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Arceer een vlak met behulp van een afbeeldingsbestand @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Voeg een Bitmap-afbeelding in - - + + Insert Bitmap from a file into a page Voeg een Bitmap in vanuit een bestand in een pagina - + Select an Image File Kies een afbeeldingsbestand - + Image (*.png *.jpg *.jpeg) Afbeelding (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Voeg middelpunten toe @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Voeg kwadrantpunten toe @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Onzichtbare randen weergeven/verbergen @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Zet View Frames aan of uit @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Voeg lasinformatie toe aan leiderslijn @@ -848,7 +848,17 @@ Pagina in dxf opslaan - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Voeg kwadrantpunten toe + + + Create Annotation Aantekening maken @@ -865,17 +875,17 @@ Dimensie maken - + Create Hatch Maar Arcering - + Create GeomHatch GeomHatch aanmaken - + Create Image Afbeelding maken @@ -906,7 +916,12 @@ Maak een middenlijn - + + Create Cosmetic Line + Cosmetische lijn maken + + + Update CosmeticLine Symbolische lijn bijwerken @@ -965,6 +980,11 @@ Edit WeldSymbol Bewerk lassymbool + + + Add Cosmetic Vertex + Voeg een cosmetisch eindpunt toe + MRichTextEdit @@ -1181,22 +1201,22 @@ Documentbron - + Create a link Maak een koppeling aan - + Link URL: URL van de koppeling: - + Select an image Kies een afbeelding - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Onjuiste Selectie @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Onjuiste selectie @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Verkeerde selectie @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. U moet een basisweergave voor deze lijn selecteren. - + No DrawViewPart objects in this selection Geen DrawViewPart-objecten in deze selectie - - + + No base View in Selection. Geen basisweergave in de selectie. - + You must select Faces or an existing CenterLine. U moet vlakken of een bestaand middenlijn selecteren. - + No CenterLine in selection. Geen middenlijn in selectie. - - - + + + Selection is not a CenterLine. Selectie is geen middenlijn. - + Selection not understood. Selectie niet begrepen. - + You must select 2 Vertexes or an existing CenterLine. U moet 2 eindpunten of een bestaande middenlijn selecteren. - + Need 2 Vertices or 1 CenterLine. Vereist 2 eindpunten of 1 middenlijn. - + Selection is empty. Selectie is leeg. - + Not enough points in selection. Niet genoeg punten in selectie. - + Selection is not a Cosmetic Line. Selectie is geen cosmetische lijn. - + You must select 2 Vertexes. U moet 2 hoekpunten selecteren. - + No View in Selection. Geen weergave in de selectie. - + You must select a View and/or lines. U moet een aanzicht en/of lijnen selecteren. - + No Part Views in this selection Geen deelweergaves in deze selectie - + Select exactly one Leader line or one Weld symbol. Selecteer precies een leiderslijn of een lassymbool. - - + + Nothing selected Niets geselecteerd - + At least 1 object in selection is not a part view Tenminste 1 object in de selectie is geen deelweergave - + Unknown object type in selection Onbekend objecttype in de selectie - + Replace Hatch? Arcering vervangen? - + Some Faces in selection are already hatched. Replace? Sommige vlakken in de selectie zijn al gearceerd. Vervangen? - + No TechDraw Page Geen TechDraw-pagina - + Need a TechDraw Page for this command Dit commando vereist een TechDraw-pagina - + Select a Face first Kies eerst een vlak - + No TechDraw object in selection Geen TechDraw-object in de selectie - + Create a page to insert. Maak een pagina om in te voegen. - - + + No Faces to hatch in this selection Geen vlakken om te arceren in deze sectie @@ -1795,6 +1815,7 @@ Opgemaakte tekst-maker + Rich text editor @@ -3472,6 +3493,14 @@ Do you want to continue? Geselecteerd: + + TechDrawGui::QGIViewAnnotation + + + Text + Tekst + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Kies een punt voor het cosmetisch eindpunt - + Left click to set a point Klik met de linkermuisknop om een punt in te stellen - + In progress edit abandoned. Start over. Bewerking in uitvoering stopgezet. Opnieuw beginnen. @@ -5025,7 +5054,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Voegt een middenlijn tussen 2 lijnen toe @@ -5033,7 +5062,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Voegt een middenlijn tussen 2 punten toe @@ -5049,7 +5078,7 @@ met behulp van de gegeven X/Y afstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Voegt een middenlijn toe aan vlakken diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm index 7f5ae5e872..3769ab9273 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts index 4694d145fb..f782fadaf1 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_no.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Select an Image File - + Image (*.png *.jpg *.jpeg) Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Lag en side å sette inn. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Vil du fortsette? Valgt: + + TechDrawGui::QGIViewAnnotation + + + Text + Tekst + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Vil du fortsette? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index 27e234c6da..2d57f8f80e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index c119088329..e3f530cf1b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -4,17 +4,17 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines - Dodaj linię środkową pomiędzy dwoma liniami + Dodaj oś pomiędzy dwoma liniami Cmd2PointCenterLine - + Add Centerline between 2 Points - Dodaj linię środkową pomiędzy dwoma punktami + Dodaj oś pomiędzy dwoma punktami @@ -36,38 +36,38 @@ CmdTechDraw2LineCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline between 2 Lines - Dodaj linię środkową pomiędzy dwoma liniami + Dodaj oś pomiędzy dwoma liniami CmdTechDraw2PointCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline between 2 Points - Dodaj linię środkową pomiędzy dwoma punktami + Dodaj oś pomiędzy dwoma punktami CmdTechDraw2PointCosmeticLine - + TechDraw Rysunek Techniczny - + Add Cosmetic Line Through 2 Points Dodaj linię kosmetyczną wytyczoną przez dwa punkty @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Rysunek Techniczny - + Insert Annotation Wstaw adnotację @@ -158,19 +158,19 @@ CmdTechDrawCenterLineGroup - + TechDraw Rysunek Techniczny - + Insert Center Line Wstaw linię środkową - + Add Centerline to Faces - Dodaj linię środkową do ściany + Dodaj oś ściany @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Rysunek Techniczny - + Remove Cosmetic Object Usuń obiekt kosmetyczny @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Rysunek Techniczny - + Add Cosmetic Vertex Dodaj wierzchołek kosmetyczny @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Rysunek Techniczny - + Change Appearance of Lines Zmień wygląd linii - + Change Appearance of selected Lines Zmień wygląd wybranych linii @@ -393,25 +393,25 @@ CmdTechDrawFaceCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline to Faces - Dodaj linię środkową do ściany + Dodaj oś ściany CmdTechDrawGeometricHatch - + TechDraw Rysunek Techniczny - + Apply Geometric Hatch to Face Zastosuj na powierzchni kreskowanie geometryczne @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Rysunek Techniczny - + Hatch a Face using Image File Kreskowanie powierzchni za pomocą pliku obrazu @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Rysunek Techniczny - + Insert Bitmap Image Wstaw obraz bitmapy - - + + Insert Bitmap from a file into a page Wstaw na stronę bitmapę z pliku - + Select an Image File Wybierz plik z obrazem - + Image (*.png *.jpg *.jpeg) Obraz (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Rysunek Techniczny - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Rysunek Techniczny - + Add Quadrant Vertices Dodaj wierzchołki kwadrantu @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Rysunek Techniczny - + Show/Hide Invisible Edges Pokaż / ukryj niewidoczne krawędzie @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Rysunek Techniczny - - + + Turn View Frames On/Off Włącz / wyłącz wyświetlanie ramek @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Rysunek Techniczny - + Add Welding Information to Leaderline Dodaj informacje spawalnicze do linii odniesienia @@ -848,7 +848,17 @@ Zapisz stronę do pliku dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Dodaj wierzchołki kwadrantu + + + Create Annotation Utwórz adnotację @@ -865,17 +875,17 @@ Utwórz wymiar - + Create Hatch Utwórz kreskowanie - + Create GeomHatch Utwórz kreskowanie geometryczne - + Create Image Utwórz obraz @@ -906,7 +916,12 @@ Utwórz linię środkową - + + Create Cosmetic Line + Utwórz linię kosmetyczną + + + Update CosmeticLine Aktualizuj linię kosmetyczną @@ -965,6 +980,11 @@ Edit WeldSymbol Edytuj symbol spawalniczy + + + Add Cosmetic Vertex + Dodaj wierzchołek kosmetyczny + MRichTextEdit @@ -1007,7 +1027,7 @@ Cut - Wytnij + Przetnij @@ -1181,22 +1201,22 @@ Źródło dokumentu - + Create a link Utwórz link - + Link URL: Łącze URL: - + Select an image Wybierz plik z obrazem - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Wszystkie (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Niepoprawny wybór @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Nieprawidłowy wybór @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Złe zaznaczenie @@ -1552,154 +1572,154 @@ - - - + + + You must select a base View for the line. Musisz wybrać podstawowy widok linii. - + No DrawViewPart objects in this selection Brak obiektów DrawViewPart w tym zaznaczeniu - - + + No base View in Selection. Brak podstawowego widoku w zaznaczeniu - + You must select Faces or an existing CenterLine. Musisz wybrać ściany lub istniejącą linię centralną. - + No CenterLine in selection. Brak linii centralnej w wyborze. - - - + + + Selection is not a CenterLine. Wybrany element nie jest linią środkową. - + Selection not understood. Zaznaczenie nie zrozumiałe. - + You must select 2 Vertexes or an existing CenterLine. Musisz wybrać 2 wierzchołki lub istniejącą linię centralną. - + Need 2 Vertices or 1 CenterLine. - Wymagane są 2 wierzchołki lub 1 linii centralna. + Wymagane są dwa wierzchołki lub linia środkowa. - + Selection is empty. Obszar zaznaczenia jest pusty. - + Not enough points in selection. Wybrano za małą ilość punktów. - + Selection is not a Cosmetic Line. Wybrany element nie jest Linią Kosmetyczną. - + You must select 2 Vertexes. Musisz wybrać 2 wierzchołki. - + No View in Selection. Brak "widoku" w zaznaczeniu. - + You must select a View and/or lines. Musisz wybrać widok i/lub linie. - + No Part Views in this selection Brak widoków części w tym zaznaczeniu - + Select exactly one Leader line or one Weld symbol. Wybierz dokładnie jedną linię odniesienia lub jeden symbol spawalniczy. - - + + Nothing selected Nic nie wybrano - + At least 1 object in selection is not a part view Co najmniej 1 obiekt w zaznaczeniu nie jest widokiem części - + Unknown object type in selection Nie znany typ obiektu w zaznaczeniu - + Replace Hatch? Czy zastąpić kreskowanie? - + Some Faces in selection are already hatched. Replace? Niektóre wybrane ściany posiadają już kreskowanie. Zastąpić? - + No TechDraw Page Brak strony TechDraw - + Need a TechDraw Page for this command Potrzebujesz strony Rysunku Technicznego dla tego polecenia - + Select a Face first - Najpierw wybierz powierzchnię + Najpierw wybierz ścianę - + No TechDraw object in selection - Brak wybranego obiektu Techdraw + Brak obiektu środowiska Rysunek Techniczny w wyborze - + Create a page to insert. Utwórz stronę do wstawienia. - - + + No Faces to hatch in this selection - Brak powierzchni do kreskowania w zaznaczeniu + Brak ściany do zakreskowania w tym zaznaczeniu @@ -1795,6 +1815,7 @@ Kreator tekstu sformatowanego + Rich text editor @@ -2083,12 +2104,12 @@ górnej i lewej krawędzi Text before arrow side symbol - Tekst przed innym symbolem bocznym + Tekst przed symbolem strzałki Text after arrow side symbol - Tekst za innym bocznym symbolem + Tekst za symbolem strzałki @@ -3473,6 +3494,14 @@ Czy chcesz kontynuować? Zaznaczone: + + TechDrawGui::QGIViewAnnotation + + + Text + Tekst + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Czy chcesz kontynuować? Y - + Pick a point for cosmetic vertex Wybierz punkt dla wierzchołka kosmetycznego - + Left click to set a point Kliknij lewy przycisk myszki, aby ustawić punkt - + In progress edit abandoned. Start over. W toku edycji - porzucona. Zacznij od początku. @@ -5026,7 +5055,7 @@ przy użyciu podanego odstępu X/Y TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodaj linię środkową pomiędzy dwoma liniami @@ -5034,7 +5063,7 @@ przy użyciu podanego odstępu X/Y TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodaj linię środkową pomiędzy dwoma punktami @@ -5050,7 +5079,7 @@ przy użyciu podanego odstępu X/Y TechDraw_FaceCenterLine - + Adds a Centerline to Faces Dodaje linię środkową do ściany diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm index 7325fc4ff3..bbb5f3cfcc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index ed47dfa6b8..e1bc17bb0c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha central aos dois pontos @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Points Adicionar linha central aos dois pontos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Line Through 2 Points Adicionar uma linha cosmética passando por 2 pontos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - Desenhos Técnicos - + Insert Annotation Inserir anotação @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Center Line Inserir Linha Central - + Add Centerline to Faces Adicionar linha de centro em Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - Desenhos Técnicos - + Remove Cosmetic Object Remover objeto cosmético @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - Desenhos Técnicos - + Change Appearance of Lines Alterar Aparência das Linhas - + Change Appearance of selected Lines Alterar a aparência das linhas selecionadas @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline to Faces Adicionar linha de centro em Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - Desenhos Técnicos - + Apply Geometric Hatch to Face Aplicar hachura geométrica numa face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - Desenhos Técnicos - + Hatch a Face using Image File Chocar uma face usando um Arquivo de Imagem @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - Desenhos Técnicos - + Insert Bitmap Image Inserir imagem Bitmap - - + + Insert Bitmap from a file into a page Insere um bitmap de um arquivo em uma Página - + Select an Image File Selecione um arquivo de imagem - + Image (*.png *.jpg *.jpeg) Imagem (*. png *. jpg *. jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - Desenhos Técnicos - + Add Midpoint Vertices Adicionar ponto central aos vértices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - Desenhos Técnicos - + Add Quadrant Vertices Adicionar vértices de segundo grau @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - Desenhos Técnicos - + Show/Hide Invisible Edges Mostrar/ocultar arestas invisíveis @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - Desenhos Técnicos - - + + Turn View Frames On/Off Ligar/desligar molduras das vistas @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - Desenhos Técnicos - + Add Welding Information to Leaderline Adicionar informações de solda na linha de anotação @@ -848,7 +848,17 @@ Salvar página para dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Adicionar vértices de segundo grau + + + Create Annotation Criar anotação @@ -865,17 +875,17 @@ Criar dimensão - + Create Hatch Criar hachura - + Create GeomHatch Criar hachura geométrica - + Create Image Criar imagem @@ -906,7 +916,12 @@ Criar linha central - + + Create Cosmetic Line + Criar Linha Cosmética + + + Update CosmeticLine Atualizar linha cosmética @@ -965,6 +980,11 @@ Edit WeldSymbol Editar símbolo de solda + + + Add Cosmetic Vertex + Adicionar Vértice Cosmético + MRichTextEdit @@ -1181,22 +1201,22 @@ Origem do documento - + Create a link Criar um link - + Link URL: URL do Link: - + Select an image Selecionar imagem - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todos (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Seleção Incorreta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Seleção incorreta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Seleção errada @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Você deve selecionar uma vista de base para a linha. - + No DrawViewPart objects in this selection Não há objetos DrawViewPart nesta seleção - - + + No base View in Selection. Nenhuma vista de base na seleção. - + You must select Faces or an existing CenterLine. Você deve selecionar faces ou uma linha de centro. - + No CenterLine in selection. Não há linha central na seleção. - - - + + + Selection is not a CenterLine. A seleção não é uma linha central. - + Selection not understood. Seleção não compreendida. - + You must select 2 Vertexes or an existing CenterLine. Você deve selecionar 2 vértices ou uma linha central existente. - + Need 2 Vertices or 1 CenterLine. Precisa de 2 vértices ou 1 linha central. - + Selection is empty. A seleção está vazia. - + Not enough points in selection. Não há pontos suficientes na seleção. - + Selection is not a Cosmetic Line. A seleção não é uma linha cosmética. - + You must select 2 Vertexes. Você deve selecionar 2 vértices. - + No View in Selection. Nenhuma vista na seleção. - + You must select a View and/or lines. Você deve selecionar uma vista e/ou linhas. - + No Part Views in this selection Nenhuma vista de peça nesta seleção - + Select exactly one Leader line or one Weld symbol. Selecione exatamente uma linha de anotações ou um símbolo de solda. - - + + Nothing selected Nada foi selecionado - + At least 1 object in selection is not a part view Pelo menos 1 objeto na seleção não é uma vista de peça - + Unknown object type in selection Tipo de objeto desconhecido na seleção - + Replace Hatch? Substituir a hachura? - + Some Faces in selection are already hatched. Replace? Algumas faces na seleção já estão hachuradas. Substituir? - + No TechDraw Page Nenhuma página TechDraw - + Need a TechDraw Page for this command Uma página TechDraw é necessária para este comando - + Select a Face first Selecione uma face primeiro - + No TechDraw object in selection Nenhum objeto TechDraw na seleção - + Create a page to insert. Crie uma página para inserir. - - + + No Faces to hatch in this selection Sem faces para preencher nesta seleção @@ -1795,6 +1815,7 @@ Criador de texto + Rich text editor @@ -3472,6 +3493,14 @@ Do you want to continue? Selecionado: + + TechDrawGui::QGIViewAnnotation + + + Text + Texto + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Indique um ponto para um vértice cosmético - + Left click to set a point Clique com o botão esquerdo para definir um ponto - + In progress edit abandoned. Start over. Edição abandonada. Comece novamente. @@ -5025,7 +5054,7 @@ usando o espaçamento X/Y fornecido TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adicionar linha central entre duas linhas @@ -5033,7 +5062,7 @@ usando o espaçamento X/Y fornecido TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adicionar linha central entre dois pontos @@ -5049,7 +5078,7 @@ usando o espaçamento X/Y fornecido TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adicionar linha central em faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm index 903f0242c5..7c453c319c 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index cf5f606970..8ccc6cbe36 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Line Through 2 Points Adicionar Linha Cosmética Através de 2 Pontos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Annotation Inserir anotação @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Center Line Inserir Linha de Eixo - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw (Desenhos Técnicos) - + Remove Cosmetic Object Remover objeto cosmético @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw (Desenhos Técnicos) - + Change Appearance of Lines Alterar Aparência das Linhas - + Change Appearance of selected Lines Alterar a aparência das linhas selecionadas @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw (Desenhos Técnicos) - + Apply Geometric Hatch to Face Aplica trama numa Vista @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw (Desenhos Técnicos) - + Hatch a Face using Image File Colocar Trama numa face usando um Ficheiro de Imagem @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Bitmap Image Inserir Imagem de Mapa de Bits - - + + Insert Bitmap from a file into a page Inserir ficheiro Mapa de bits numa página - + Select an Image File Selecione um Ficheiro de imagem - + Image (*.png *.jpg *.jpeg) Imagem (*. png *. jpg *. jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw (Desenhos Técnicos) - + Add Midpoint Vertices Adicionar vértices de ponto médio @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw (Desenhos Técnicos) - + Add Quadrant Vertices Adicionar vértices do Quadrante @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw (Desenhos Técnicos) - + Show/Hide Invisible Edges Mostrar/Ocultar arestas invisíveis @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw (Desenhos Técnicos) - - + + Turn View Frames On/Off Ligar/desligar molduras das vistas @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw (Desenhos Técnicos) - + Add Welding Information to Leaderline Adicionar Linha de chamada com Informações de soldadura @@ -848,7 +848,17 @@ Salvar folha para dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Adicionar vértices do Quadrante + + + Create Annotation Criar anotação @@ -865,17 +875,17 @@ Criar cotagem - + Create Hatch Criar Trama - + Create GeomHatch Criar TramaGeometrica - + Create Image Criar imagem @@ -906,7 +916,12 @@ Criar LinhadeEixo - + + Create Cosmetic Line + Criar Linha Cosmética + + + Update CosmeticLine Atualizar LinhaCosmética @@ -965,6 +980,11 @@ Edit WeldSymbol Editar Símbolo de soldadura + + + Add Cosmetic Vertex + Adicionar Vértice Cosmético + MRichTextEdit @@ -1181,22 +1201,22 @@ Origem do documento - + Create a link Criar uma ligação - + Link URL: URL da ligação: - + Select an image Selecione uma imagem - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Todos (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Seleção Incorreta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selecção incorrecta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Seleção errada @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Deve selecionar uma vista base para a linha. - + No DrawViewPart objects in this selection Não há objetos de desenho nesta seleção - - + + No base View in Selection. Nenhuma vista base na seleção. - + You must select Faces or an existing CenterLine. Deve selecionar Faces ou uma linha de eixo. - + No CenterLine in selection. Não há linha de eixo na seleção. - - - + + + Selection is not a CenterLine. A seleção não é uma linha de eixo. - + Selection not understood. Seleção não compreendida. - + You must select 2 Vertexes or an existing CenterLine. Deve selecionar 2 vértices ou uma linha de eixo existente. - + Need 2 Vertices or 1 CenterLine. Precisa de 2 vértices ou 1 linha de eixo. - + Selection is empty. A seleção está vazia. - + Not enough points in selection. Não há pontos suficientes na seleção. - + Selection is not a Cosmetic Line. A seleção não é uma linha cosmética. - + You must select 2 Vertexes. Deve selecionar 2 vértices. - + No View in Selection. Nenhuma vista na seleção. - + You must select a View and/or lines. Deve selecionar uma vista e/ou linhas. - + No Part Views in this selection Não há vistas de peças nesta seleção - + Select exactly one Leader line or one Weld symbol. Selecione apenas uma linha de chamada ou um símbolo de soldadura. - - + + Nothing selected Nada selecionado - + At least 1 object in selection is not a part view Pelo menos 1 objeto na seleção não é uma vista de peça - + Unknown object type in selection Tipo de objeto desconhecido na seleção - + Replace Hatch? Substituir a Trama? - + Some Faces in selection are already hatched. Replace? Algumas faces na seleção já estão sombreadas. Substituir? - + No TechDraw Page Nenhuma folha TechDraw - + Need a TechDraw Page for this command É necessária uma folha TechDraw para este comando - + Select a Face first Seleccione uma face primeiro - + No TechDraw object in selection Nenhum objeto TechDraw na seleção - + Create a page to insert. Criar uma página para inserir. - - + + No Faces to hatch in this selection Sem faces para preencher nesta seleção @@ -1795,6 +1815,7 @@ Criador de Rich text + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Selecionado: + + TechDrawGui::QGIViewAnnotation + + + Text + Texto + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Clique com o botão esquerdo para definir um ponto - + In progress edit abandoned. Start over. Edição em curso abandonada. Comece novamente. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm index 12ece95074..661945d10f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 26c4417a78..3bbb1fe280 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Desen tehnic - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Desen tehnic - + Insert Annotation Inserare adnotare @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Desen tehnic - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Desen tehnic - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Desen tehnic - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Desen tehnic - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Desen tehnic - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Desen tehnic - + Apply Geometric Hatch to Face Aplicați o hașură geometrică pe o fațetă @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Desen tehnic - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Desen tehnic - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Selectează o imagine - + Image (*.png *.jpg *.jpeg) Imagine (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Desen tehnic - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Desen tehnic - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Desen tehnic - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Desen tehnic - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Desen tehnic - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selectarea incorectă @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selectarea incorectă @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Nici o pagină de TechDraw - + Need a TechDraw Page for this command Aveți nevoie de o TechDraw Page pentru această comandă - + Select a Face first Selectaţi mai întâi o fațetă - + No TechDraw object in selection Nici un obiect de TechDraw în selecţie - + Create a page to insert. Creează o pagină pentru inserare - - + + No Faces to hatch in this selection Nici o fațetă în această selecţie @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Selectat: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm index 504f59b4be..0f51bc82fa 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 702e677ce1..b5e28c7942 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Добавить осевую линию между 2 линиями @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Добавить осевую линию между 2 точками @@ -30,18 +30,18 @@ Add Quadrant Vertices - Добавить Вершины Квадрантов + Добавить 4-ре вершины по краям окружности CmdTechDraw2LineCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Lines Добавить осевую линию между 2 линиями @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Points Добавить осевую линию между 2 точками @@ -62,14 +62,14 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Технический чертёж - + Add Cosmetic Line Through 2 Points - Добавить Косметическую Линию через 2 Точки + Добавить вспомогательную линию между 2-мя точками @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Технический чертёж - + Insert Annotation Вставить заметку @@ -152,23 +152,23 @@ Insert Balloon Annotation - Вставить примечание в выноске + Вставить примечание в выноску CmdTechDrawCenterLineGroup - + TechDraw Технический чертёж - + Insert Center Line Вставить осевую линию - + Add Centerline to Faces Добавить осевую линию к Граням @@ -183,7 +183,7 @@ Insert Clip Group - Вставить группу срезов + Вставить группу сечений @@ -196,7 +196,7 @@ Add View to Clip Group - Добавить вид в группу срезов + Добавить вид в группу сечений @@ -209,33 +209,33 @@ Remove View from Clip Group - Удалить вид из группы срезов + Удалить вид из группы сечений CmdTechDrawCosmeticEraser - + TechDraw Технический чертёж - + Remove Cosmetic Object - Удалить косметический объект + Удалить Вспомогательный Объект CmdTechDrawCosmeticVertex - + TechDraw Технический чертёж - + Add Cosmetic Vertex - Добавить Косметическую вершину + Добавить Вспомогательную Вершину @@ -248,30 +248,30 @@ Insert Cosmetic Vertex - Вставить косметическую вершину + Вставить Вспомогательную Вершину Add Cosmetic Vertex - Добавить Косметическую вершину + Добавить Вспомогательную Вершину CmdTechDrawDecorateLine - + TechDraw Технический чертёж - + Change Appearance of Lines Изменить внешний вид линий - + Change Appearance of selected Lines - Change Appearance of selected Lines + Изменить внешний вид выбранных линий @@ -284,7 +284,7 @@ Insert Detail View - Вставить Подробный вид + Вставить Подробный Вид @@ -297,7 +297,7 @@ Insert Diameter Dimension - Вставить Размер диаметра + Вставить Размер Диаметра @@ -341,12 +341,12 @@ Export Page as DXF - Экспорт страницы в DXF + Экспорт листа в DXF Save Dxf File - Save Dxf File + Сохранить DXF файл @@ -364,7 +364,7 @@ Export Page as SVG - Экспорт страницы в SVG + Экспорт листа в SVG @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Технический чертёж - + Add Centerline to Faces Добавить осевую линию к Граням @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Технический чертёж - + Apply Geometric Hatch to Face Применить геометрическую штриховку к грани @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Технический чертёж - + Hatch a Face using Image File Штриховать грань, используя файл изображения @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Технический чертёж - + Insert Bitmap Image Вставить растровое изображение - - + + Insert Bitmap from a file into a page Вставить растровое изображение из файла на страницу - + Select an Image File Выберите файл изображения - + Image (*.png *.jpg *.jpeg) Изображение (*.png *.jpg *.jpeg) @@ -507,7 +507,7 @@ Add Leaderline to View - Добавить Указательную линию на Вид + Добавить Линию-выноску в Вид @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Технический чертёж - + Add Midpoint Vertices Добавить Средние Вершины @@ -606,14 +606,14 @@ CmdTechDrawQuadrants - + TechDraw Технический чертёж - + Add Quadrant Vertices - Добавить Вершины Квадрантов + Добавить 4-ре вершины по краям окружности @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Технический чертёж - + Show/Hide Invisible Edges Показать/скрыть невидимые края @@ -709,7 +709,7 @@ Insert SVG Symbol - Вставить SVG символ + Вставить SVG знак @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Технический чертёж - - + + Turn View Frames On/Off Отображение рамки вкл/выкл @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Технический чертёж - + Add Welding Information to Leaderline Добавить информацию о сварке в указательную линию @@ -799,7 +799,7 @@ Create view - Create view + Создать вид @@ -809,48 +809,58 @@ Create Clip - Create Clip + Создать Сечение ClipGroupAdd - ClipGroupAdd + Добавить Группу Сечений ClipGroupRemove - ClipGroupRemove + Удалить Группу Сечений Create Symbol - Create Symbol + Создать Знак Create DraftView - Create DraftView + Создать Draft Вид Create ArchView - Create ArchView + Создать Arch Вид Create spreadsheet view - Create spreadsheet view + Создать электронную таблицу Save page to dxf - Save page to dxf + Сохранить лист в DXF формате - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Добавить 4-ре вершины по краям окружности + + + Create Annotation - Create Annotation + Создать Аннотацию @@ -862,27 +872,27 @@ Create Dimension - Create Dimension + Указать размер - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image - Create Image + Создать изображение Drag Balloon - Drag Balloon + Переместить позиционную выноску @@ -893,7 +903,7 @@ Create Balloon - Create Balloon + Создать позиционную выноску @@ -906,9 +916,14 @@ Create CenterLine - + + Create Cosmetic Line + Создать Косметическую Линию + + + Update CosmeticLine - Update CosmeticLine + Обновить Вспомогательную Линию @@ -923,12 +938,12 @@ Create Leader - Create Leader + Создать Линию-выноску Edit Leader - Edit Leader + Править Линию-выноску @@ -943,7 +958,7 @@ Apply Quick - Apply Quick + Применить сразу @@ -958,12 +973,17 @@ Create WeldSymbol - Create WeldSymbol + Создать Знак сварных соединений Edit WeldSymbol - Edit WeldSymbol + Править Знак сварных соединений + + + + Add Cosmetic Vertex + Добавить Вспомогательную Вершину @@ -1181,22 +1201,22 @@ Источник документа - + Create a link Создать ссылку - + Link URL: URL-адрес ссылки: - + Select an image Выберите изображение - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Все (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1247,7 +1267,7 @@ Select one Clip group and one View. - Выберите группу срезов и один вид. + Выберите группу сечений и один вид. @@ -1262,7 +1282,7 @@ Clip and View must be from same Page. - Срез и вид должны быть из одного листа. + Сечение и вид должны быть из одного листа. @@ -1272,7 +1292,7 @@ View does not belong to a Clip - Вид не принадлежит срезу + Вид не принадлежит сечению @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Некорректный выбор @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Некорректный выбор @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Неправильный выбор @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Необходимо выбрать базовый вид для линии. - + No DrawViewPart objects in this selection Нет объектов DrawViewPart в выбранном - - + + No base View in Selection. Нет базового вида в выбранном. - + You must select Faces or an existing CenterLine. Вы должны выбрать Грани или существующую Осевую Линию. - + No CenterLine in selection. В выбранном нет ОсевойЛинии. - - - + + + Selection is not a CenterLine. Выделение не является центральной линией. - + Selection not understood. Выделение не понятно. - + You must select 2 Vertexes or an existing CenterLine. Вы должны выбрать 2 Вершины или существующую ОсевуюЛинию. - + Need 2 Vertices or 1 CenterLine. Требуется две вершины или одна центральная линия. - + Selection is empty. Выделение пусто. - + Not enough points in selection. Выбрано недостаточно точек. - + Selection is not a Cosmetic Line. - Выделение не является Косметической Линией. + Выделение не является Вспомогательной Линией. - + You must select 2 Vertexes. Вы должны выбрать 2 Вершины. - + No View in Selection. Нет Вида в выделенном. - + You must select a View and/or lines. Вы должны выбрать Вид и/или линии. - + No Part Views in this selection Нет видов Детали в этом выборе - + Select exactly one Leader line or one Weld symbol. Выберите только одну Указательную линию или один символ Сварки. - - + + Nothing selected Ничего не выбрано - + At least 1 object in selection is not a part view Минимум 1 объект в выбранном не является местным видом - + Unknown object type in selection Неизвестный тип объекта в выбранном - + Replace Hatch? Заменить штриховку? - + Some Faces in selection are already hatched. Replace? Некоторые Грани в выборке уже заштрихованы. Заменить? - + No TechDraw Page - Нет листа чертежа + Отсутствует лист чертежа - + Need a TechDraw Page for this command Требуется лист чертежа для этой команды - + Select a Face first Сначала выберите поверхность - + No TechDraw object in selection В вашем выборе нет объекта технического чертежа - + Create a page to insert. Создать страницу для вставки. - - + + No Faces to hatch in this selection Нет граней для штриховки в этом выделении @@ -1745,7 +1765,7 @@ Export Page As PDF - Экспорт страницы в PDF + Экспорт листа в PDF @@ -1755,7 +1775,7 @@ Export page as SVG - Экспорт страницы в SVG + Экспорт листа в SVG @@ -1782,12 +1802,12 @@ New Leader Line - Новая указательная линия + Новая Линия-выноска Edit Leader Line - Изменить указательную линию + Править Линию-выноску @@ -1795,6 +1815,7 @@ Создатель форматированного текста + Rich text editor @@ -1803,12 +1824,12 @@ New Cosmetic Vertex - Новая косметическая вершина + Новая вспомогательная вершина Select a symbol - Выберите символ + Выберите знак @@ -1849,12 +1870,12 @@ Create Welding Symbol - Создать символ сварки + Создать Знак сварного соединения Edit Welding Symbol - Изменить символ сварки + Править Знак сварного соединения @@ -1864,7 +1885,7 @@ Edit Cosmetic Line - Изменить Косметическую Линию + Изменить Вспомогательную Линию @@ -2078,7 +2099,7 @@ the top and left view border Welding Symbol - Символ сварки + Знак сварного соединения @@ -2099,7 +2120,7 @@ the top and left view border Symbol - Символ + Знак @@ -2198,7 +2219,7 @@ This directory will be used for the symbol selection. Symbol Directory - Каталог символов + Каталог знаков @@ -2217,7 +2238,7 @@ This directory will be used for the symbol selection. Edge Fuzz - Edge Fuzz + Размер области выбора возле рёбер @@ -2360,7 +2381,7 @@ can be a performance penalty in complex models. Mark Fuzz - Mark Fuzz + Размер области выбора возле центральных отметок @@ -2485,12 +2506,12 @@ Each unit is approx. 0.1 mm wide Leader Line Auto Horizontal - Автоматическая горизонтальность линии выноски + Автоматическая горизонтальность линии-выноски Length of balloon leader line kink - Длина изгиба линии выноски + Длина изгиба линии-выноски @@ -2505,7 +2526,7 @@ Each unit is approx. 0.1 mm wide Circular - Круговой + Окружность @@ -2520,7 +2541,7 @@ Each unit is approx. 0.1 mm wide Inspection - Проверка + Скругленный прямоугольник @@ -2591,7 +2612,7 @@ Each unit is approx. 0.1 mm wide Line Width Group - Line Width Group + Используемая группа линий (по толщине) @@ -2626,7 +2647,7 @@ Each unit is approx. 0.1 mm wide Balloon Shape - Форма всплывающего примечания + Форма примечания Выноски @@ -2660,7 +2681,7 @@ Each unit is approx. 0.1 mm wide Colors - Цвета + Выделение цветом @@ -2805,7 +2826,7 @@ Each unit is approx. 0.1 mm wide Leaderline - Линия выноски + Линия-выноска @@ -2911,7 +2932,7 @@ Multiplier of 'Font Size' Diameter Symbol - Символ диаметра + Знак диаметра @@ -3017,13 +3038,13 @@ for ProjectionGroups * this font is also used for dimensions Changes have no effect on existing dimensions. - * this font is also used for dimensions - Changes have no effect on existing dimensions. + * этот шрифт также используется для указания размеров +Изменение не влияет на уже обозначенные размеры. Label Font* - Label Font* + Шрифт Надписей* @@ -3073,12 +3094,12 @@ for ProjectionGroups Hidden Line Style - Hidden Line Style + Стиль Скрытой Линии Style for hidden lines - Style for hidden lines + Стиль скрытых линий @@ -3408,7 +3429,7 @@ Fast, but result is a collection of short straight lines. Toggle &Frames - Вкл./Выкл рамки + Вкл/Выкл отображения маркеров редактируемых полей рамки @@ -3457,7 +3478,7 @@ Do you want to continue? Save Dxf File - Save Dxf File + Сохранить DXF файл @@ -3470,12 +3491,20 @@ Do you want to continue? Выбрано: + + TechDrawGui::QGIViewAnnotation + + + Text + Текст + + TechDrawGui::SymbolChooser Symbol Chooser - Выбор символа + Выбор знака @@ -3485,12 +3514,12 @@ Do you want to continue? Symbol Dir - Каталог Символов + Папка Знака Directory to welding symbols. - Каталог символов сварки. + Каталог знаков сварки. @@ -3498,7 +3527,7 @@ Do you want to continue? Balloon - Шар + Позиционная выноска @@ -3528,12 +3557,12 @@ Do you want to continue? Font Size: - Font Size: + Размер Шрифта: Bubble Shape: - Bubble Shape: + Геометрическая форма выноски: @@ -3543,7 +3572,7 @@ Do you want to continue? Circular - Круговой + Окружность @@ -3558,7 +3587,7 @@ Do you want to continue? Inspection - Проверка + Скругленный прямоугольник @@ -3583,12 +3612,12 @@ Do you want to continue? Bubble shape scale factor - Bubble shape scale factor + Масштаб выноски: End Symbol: - Конечный символ: + Стиль окончания: @@ -3598,17 +3627,17 @@ Do you want to continue? End Symbol Scale: - End Symbol Scale: + Масштаб конечной фигуры линии: End symbol scale factor - End symbol scale factor + Размер фигуры окончания линии Line Visible: - Line Visible: + Отображать линию @@ -3633,7 +3662,7 @@ Do you want to continue? Leader line width - Толщина линии выноски + Толщина линии-выноски @@ -3643,7 +3672,7 @@ Do you want to continue? Length of balloon leader line kink - Длина изгиба линии выноски + Длина изгиба линии-выноски @@ -3795,7 +3824,7 @@ Do you want to continue? Cosmetic Vertex - Косметическая вершина + Вспомогательная Вершина @@ -3828,17 +3857,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Выберите точку для косметической вершины - + Left click to set a point Щёлкните левой кнопкой мыши, чтобы установить точку - + In progress edit abandoned. Start over. Редактирование прекращено. Начать сначала. @@ -3848,7 +3877,7 @@ Do you want to continue? Cosmetic Line - Косметическая Линия + Вспомогательная Линия @@ -3865,7 +3894,7 @@ Do you want to continue? 3d Point - 3d точка + 3d Точка @@ -4005,33 +4034,33 @@ Custom: custom scale factor is used Tolerancing - Tolerancing + Точность If theoretical exact (basic) dimension - If theoretical exact (basic) dimension + Размер, определяющий номинальное расположение/форму элементов, ограничиваемых допуском, без предельных отклонений (см. ГОСТ 2.308 пункт 7) Theoretically Exact - Theoretically Exact + Номинальный размер. Связанный с допуском. Reverses usual direction of dimension line terminators - Reverses usual direction of dimension line terminators + Изменить направление стрелок на концах размера в обратную сторону Equal Tolerance - Equal Tolerance + Предельные отклонения симметричны Overtolerance: - Overtolerance: + Верхнее предельное отклонение: @@ -4045,7 +4074,7 @@ the negated value for 'Under Tolerance'. Undertolerance: - Undertolerance: + Нижнее предельное отклонение: @@ -4059,12 +4088,12 @@ by negative value of 'Over Tolerance'. Formatting - Formatting + Форматирование Format Specifier: - Format Specifier: + Шаблон форматирования: @@ -4082,42 +4111,42 @@ be used instead if the dimension value Arbitrary Text - Arbitrary Text + Применить форматирование к значению размера OverTolerance Format Specifier: - OverTolerance Format Specifier: + Шаблон формата верх. пред. откл.: Specifies the overtolerance format in printf() style, or arbitrary text - Specifies the overtolerance format in printf() style, or arbitrary text + Шаблон форматирования значения верхнего предельного отклонения аналогичный используемому в методе printf() или произвольный текст UnderTolerance Format Specifier: - UnderTolerance Format Specifier: + Шаблон формата нижн. пред. откл.: Specifies the undertolerance format in printf() style, or arbitrary text - Specifies the undertolerance format in printf() style, or arbitrary text + Шаблон форматирования значения нижнего предельного отклонения аналогичный используемому в методе printf() или произвольный текст Arbitrary Tolerance Text - Arbitrary Tolerance Text + Применить форматирование к значениям отклонения Display Style - Display Style + Стиль отображения Flip Arrowheads - Flip Arrowheads + Изменить направление стрелок размера @@ -4127,12 +4156,12 @@ be used instead if the dimension value Color of the dimension - Color of the dimension + Цвет отображения линий и стрелок размера Font Size: - Font Size: + Размер Шрифта: @@ -4142,7 +4171,7 @@ be used instead if the dimension value Drawing Style: - Drawing Style: + Стиль начертания: @@ -4289,7 +4318,7 @@ be used instead if the dimension value Leader Line - Указательная линия + Линия-выноска @@ -4389,7 +4418,7 @@ You can pick further points to get line segments. Pick a starting point for leader line - Выберите начальную точку для указательной линии + Выберите начальную точку для линии-выноски @@ -4764,7 +4793,7 @@ using the given X/Y Spacing Cosmetic - Косметика + Вспомогательная @@ -4980,7 +5009,7 @@ using the given X/Y Spacing Symbol - Символ + Знак @@ -5023,7 +5052,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Добавить ОсевуюЛинию между 2 Линиями @@ -5031,7 +5060,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Добавить ОсевуюЛинию между 2 Точками @@ -5041,13 +5070,13 @@ using the given X/Y Spacing Inserts a Cosmetic Vertex into a View - Вставить косметическую вершину в вид + Вставить вспомогательную вершину в Вид TechDraw_FaceCenterLine - + Adds a Centerline to Faces Добавить Осевую линию к Граням @@ -5065,7 +5094,7 @@ using the given X/Y Spacing Inserts Cosmetic Vertices at Midpoint of selected Edges - Вставить косметические вершины в середину выбранных ребер + Вставить вспомогательные вершины по центру выбранных ребер @@ -5073,7 +5102,7 @@ using the given X/Y Spacing Inserts Cosmetic Vertices at Quadrant Points of selected Circles - Вставить косметическую Вершину на точках четверти выбранной Окружности + Вставить вспомогательные вершины в четырех крайних точках выбранной окружности @@ -5099,12 +5128,12 @@ using the given X/Y Spacing Add Lines - Add Lines + Добавить Линии Add Vertices - Add Vertices + Добавить Вершины @@ -5114,22 +5143,22 @@ using the given X/Y Spacing TechDraw Pages - TechDraw Pages + TechDraw Листы TechDraw Views - TechDraw Views + TechDraw Виды TechDraw Clips - TechDraw Clips + TechDraw Сечения TechDraw Dimensions - TechDraw Dimensions + TechDraw Размеры @@ -5149,7 +5178,7 @@ using the given X/Y Spacing Views - Views + Виды diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm index 1c4f4d0e26..d1f83dc0ac 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts index 94e30bc4aa..9e85e88e99 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sk.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Pridať kozmetickú priamku cez dva body @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Vložiť anotáciu @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Vybrať obrazový súbor - + Image (*.png *.jpg *.jpeg) Obraz (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Vytvoriť kozmetickú úsečku + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Výber je prázdny. - + Not enough points in selection. Nedostatok bodov vo výbere. - + Selection is not a Cosmetic Line. Výber nie je kozmetická úsečka. - + You must select 2 Vertexes. Musíš vybrať 2 body. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Vytvoriť stránku pre vloženie. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Chcete pokračovať? Vybrané: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Chcete pokračovať? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm index 8e5539b783..ed0b1e1372 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 1a08e64431..14248e5399 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj središčnico med dve točki @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Points Dodaj središčnico med dve točki @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TehRisanje - + Add Cosmetic Line Through 2 Points Dodaj skozi dve točki dopolnilno daljco @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TehRisanje - + Insert Annotation Vstavi Opombo @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TehRisanje - + Insert Center Line Vstavi središčnico - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TehRisanje - + Remove Cosmetic Object Odstrani dopolnilni predmet @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TehRisanje - + Add Cosmetic Vertex Dodaj dopolnilno oglišče @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TehRisanje - + Change Appearance of Lines Spremeni videz črt - + Change Appearance of selected Lines Spremeni videz črt @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TehRisanje - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TehRisanje - + Apply Geometric Hatch to Face Uporabi geometrijsko črtkanje na ploskvi @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TehRisanje - + Hatch a Face using Image File Počrtkaj ploskev s pomočjo slikovne datoteke @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TehRisanje - + Insert Bitmap Image Vstavi točkovno sliko - - + + Insert Bitmap from a file into a page Vstavi v stran točkovno sliko iz datoteke - + Select an Image File Izberite datoteko slike - + Image (*.png *.jpg *.jpeg) Slika (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TehRisanje - + Add Midpoint Vertices Dodaj razpolovišča @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TehRisanje - + Add Quadrant Vertices Dodaj četrtinska oglišča @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TehRisanje - + Show/Hide Invisible Edges Prikaži/skrij nevidne robove @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TehRisanje - - + + Turn View Frames On/Off Vklopi ali izklopi Okvire Pogledov @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TehRisanje - + Add Welding Information to Leaderline Dodaj opisnici podatek o varjenju @@ -848,7 +848,17 @@ Shrani stran kot DXF - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Dodaj četrtinska oglišča + + + Create Annotation Ustvari pripis @@ -865,17 +875,17 @@ Ustvari koto - + Create Hatch Ustvari črtkanje - + Create GeomHatch Ustvari GeometričnoČrtkanje - + Create Image Ustvari sliko @@ -906,7 +916,12 @@ Ustvari Središčnico - + + Create Cosmetic Line + Ustvari dopolnilno črto + + + Update CosmeticLine Posodobi dopolnilno daljico @@ -965,6 +980,11 @@ Edit WeldSymbol Uredi oznako za zvar + + + Add Cosmetic Vertex + Dodaj dopolnilno oglišče + MRichTextEdit @@ -1181,22 +1201,22 @@ Vir dokumenta - + Create a link Ustvari povezavo - + Link URL: URL povezava: - + Select an image Izberite sliko - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Vse (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Nepravilna Izbira @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Nepravilen izbor @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Napačen izbor @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Za črto morate izbrati pogled predloge. - + No DrawViewPart objects in this selection Nobenega očrtovalnega pogleda ni v izboru - - + + No base View in Selection. Nobenega pogleda podloge ni v izboru. - + You must select Faces or an existing CenterLine. Izbrati morate ploskve ali obstoječo središčnico. - + No CenterLine in selection. V izboru ni nobene središčnice. - - - + + + Selection is not a CenterLine. Izbrano ni središčnica. - + Selection not understood. Izbor ni razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Izbrati morate 2 oglišči ali obstoječo središčnico. - + Need 2 Vertices or 1 CenterLine. Potrebni sta dve oglišči ali ena središčnica. - + Selection is empty. Nič ni izbrano. - + Not enough points in selection. Izbranih je premalo točk. - + Selection is not a Cosmetic Line. Izbrano ni dopolnilna daljica. - + You must select 2 Vertexes. Izbrani morate dve oglišči. - + No View in Selection. V izboru ni nobenega pogleda. - + You must select a View and/or lines. Izbrati morate pogled in/ali daljice. - + No Part Views in this selection V tem izboru ni pogledov na dele - + Select exactly one Leader line or one Weld symbol. Izberite natanko eno opisnično črto ali eno oznako za zvar. - - + + Nothing selected Nič ni izbrano - + At least 1 object in selection is not a part view Vsaj en predmet v izboru ni pogled - + Unknown object type in selection V izboru je nepoznana vrsta predmeta - + Replace Hatch? Nadomesti črtkanje? - + Some Faces in selection are already hatched. Replace? Nekatere ploskve v izboru so že počrtkane. Želite nadomesti? - + No TechDraw Page Ni strani TehRisbe - + Need a TechDraw Page for this command Za ta ukaz potrebujete stran TehRisanja - + Select a Face first Izberi ploskev najprej - + No TechDraw object in selection V izboru ni predmeta TehRisanja - + Create a page to insert. Ustvari stran za vstavljanje. - - + + No Faces to hatch in this selection V tem izboru ni Ploskev za počrtkanje @@ -1795,6 +1815,7 @@ Ustvarjalnik obogatenega besedila + Rich text editor @@ -3472,6 +3493,14 @@ Ali želite nadaljevati? Izbrano: + + TechDrawGui::QGIViewAnnotation + + + Text + Besedilo + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Ali želite nadaljevati? Y - + Pick a point for cosmetic vertex Izberi točko za dopolnilno oglišče - + Left click to set a point Levi klik za določitev točke - + In progress edit abandoned. Start over. Tekom urejanja je prišlo do prekinitve. Začni znova. @@ -5025,7 +5054,7 @@ s pomočjo podanih X/Y odmikov TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Doda somernico med dve daljici @@ -5033,7 +5062,7 @@ s pomočjo podanih X/Y odmikov TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Doda somernico med dve točki @@ -5049,7 +5078,7 @@ s pomočjo podanih X/Y odmikov TechDraw_FaceCenterLine - + Adds a Centerline to Faces Doda ploskvam središčnico diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm index 543eae6bb4..d7884f160f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 2ab46aa405..9ca5974dc7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Изаберите слику - + Image (*.png *.jpg *.jpeg) Слика (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Изаберите слику - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Ништа није изабрано - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Прво изаберите површ - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Направи страницу за уметање - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3470,6 +3491,14 @@ Do you want to continue? Одабрано: + + TechDrawGui::QGIViewAnnotation + + + Text + Текст + + TechDrawGui::SymbolChooser @@ -3828,17 +3857,17 @@ Do you want to continue? 'Y' - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5023,7 +5052,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5031,7 +5060,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5047,7 +5076,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm index fa454b7595..b18db1c45f 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 2208e2e9e1..29c02bace8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Lägg till mittlinje mellan 2 linjer @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Lägg till mittlinje mellan 2 poäng @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Lägg till mittlinje mellan 2 linjer @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Lägg till mittlinje mellan 2 poäng @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Lägg till kosmetisk linje genom 2 poäng @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Infoga anteckning @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Infoga mittlinje - + Add Centerline to Faces Lägg till mittlinje i ansikten @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Ta bort kosmetiskt objekt @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Lägg till Kosmetiska Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Ändra utseende på linjer - + Change Appearance of selected Lines Ändra utseende på valda linjer @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Lägg till mittlinje i ansikten @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Applicera geometrisk snittfyllning på yta @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Kläck ett ansikte med hjälp av bildfil @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Infoga bitmappsbild - - + + Insert Bitmap from a file into a page Infoga Bitmapp från en fil till en sida - + Select an Image File Välj en bildfil - + Image (*.png *.jpg *.jpeg) Bild (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Lägg till mittpunktsvertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Lägg till kvadrantver @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Visa/dölj osynliga kanter @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Växla vyramar av/på @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Lägg till svetsinformation till Leaderline @@ -848,7 +848,17 @@ Spara sida på dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Lägg till kvadrantver + + + Create Annotation Skapa anteckning @@ -865,17 +875,17 @@ Skapa dimension - + Create Hatch Skapa Hatch - + Create GeomHatch Skapa GeomHatch - + Create Image Skapa bild @@ -906,7 +916,12 @@ Skapa CenterLine - + + Create Cosmetic Line + Skapa kosmetisk linje + + + Update CosmeticLine Uppdatera CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Redigera Svetssymbol + + + Add Cosmetic Vertex + Lägg till Kosmetiska Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Dokumentkälla - + Create a link Skapa en länk - + Link URL: Länk-URL: - + Select an image Välj en bild - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Felaktig markering @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Felaktig markering @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Fel val @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Du måste markera en basvy för linjen. - + No DrawViewPart objects in this selection Inga DrawViewPart-objekt i aktuell markering - - + + No base View in Selection. Ingen basvy i markering. - + You must select Faces or an existing CenterLine. Du måste välja Ansikten eller en befintlig CenterLine. - + No CenterLine in selection. Ingen CenterLine i markering. - - - + + + Selection is not a CenterLine. Markering är inte en CenterLine. - + Selection not understood. Urval inte förstått. - + You must select 2 Vertexes or an existing CenterLine. Du måste välja 2 Vertexes eller en befintlig CenterLine. - + Need 2 Vertices or 1 CenterLine. Behöver 2 Vertices eller 1 CenterLine. - + Selection is empty. Markeringen är tom. - + Not enough points in selection. Inte tillräckligt med poäng i markering. - + Selection is not a Cosmetic Line. Val är inte en Cosmetic Line. - + You must select 2 Vertexes. Du måste välja 2 Vertexes. - + No View in Selection. Ingen vy i markering. - + You must select a View and/or lines. Du måste välja en Visa och/eller rader. - + No Part Views in this selection Inga delvyer i det här valet - + Select exactly one Leader line or one Weld symbol. Välj exakt en Ledare fodrar eller en Svetsa symbol. - - + + Nothing selected Inget markerat - + At least 1 object in selection is not a part view Ett eller flera objekt i markeringen är inte en delvy - + Unknown object type in selection Okänd objekttyp i markering - + Replace Hatch? Ersätta Hatch? - + Some Faces in selection are already hatched. Replace? Vissa Ansikten i valet är redan kläckta. Ersätta? - + No TechDraw Page Ingen TechDraw-sida - + Need a TechDraw Page for this command En TechDraw-sida behövs för detta kommando - + Select a Face first Markera en yta först - + No TechDraw object in selection Inget TechDraw-objekt i markering - + Create a page to insert. Skapa en sida att infoga. - - + + No Faces to hatch in this selection Inga ytor att snittfylla i aktuell markering @@ -1795,6 +1815,7 @@ Rich Text-skapare + Rich text editor @@ -3472,6 +3493,14 @@ Do you want to continue? Vald: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3830,17 +3859,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Välj en punkt för kosmetisk hörnpunkt - + Left click to set a point Vänsterklicka för att infoga punkt - + In progress edit abandoned. Start over. Pågående redigering avbruten. Börja om. @@ -5025,7 +5054,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Lägger till en Mittlinje mellan 2 linjer @@ -5033,7 +5062,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Lägger till en mittlinje mellan 2 punkter @@ -5049,7 +5078,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_FaceCenterLine - + Adds a Centerline to Faces Lägger till en mittlinje i Ansikten diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm index dc28fadc44..55f2a7ee2d 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index 0f820374d9..38ffb401a8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 2 çizgi arasına Merkez çizgisi ekler @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 2 nokta arasına Merkez çizgisi ekler @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Lines 2 çizgi arasına Merkez çizgisi ekler @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Points 2 nokta arasına Merkez çizgisi ekler @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TeknikÇizim - + Add Cosmetic Line Through 2 Points 2 nokta boyunca yardımcı doğru ekle @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TeknikÇizim - + Insert Annotation Açıklama girin @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TeknikÇizim - + Insert Center Line Yeni Eksen - + Add Centerline to Faces Yüzey(ler) e bir eksen ekle @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TeknikÇizim - + Remove Cosmetic Object Yardımcı nesneyi kaldır @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TeknikÇizim - + Add Cosmetic Vertex Yardımcı Nokta Ekle @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TeknikÇizim - + Change Appearance of Lines Çizgilerin görünümünü değiştir - + Change Appearance of selected Lines Seçili Çizgilerin Görünümünü Değiştir @@ -346,7 +346,7 @@ Save Dxf File - Save Dxf File + Dxf dosyasını kaydet @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TeknikÇizim - + Add Centerline to Faces Yüzey(ler) e bir eksen ekle @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TeknikÇizim - + Apply Geometric Hatch to Face Yüze Geometrik çizgilerle süleme uygula @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TeknikÇizim - + Hatch a Face using Image File Görüntü Dosyasını Kullanarak Bir Yüzü Taratın @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TeknikÇizim - + Insert Bitmap Image Bitmap resmi ekle - - + + Insert Bitmap from a file into a page Bir dosyadan bir sayfaya bir bitmap ekler - + Select an Image File Bir Resim Dosyası Seç - + Image (*.png *.jpg *.jpeg) Resim (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TeknikÇizim - + Add Midpoint Vertices Orta nokta köşeleri ekle @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TeknikÇizim - + Add Quadrant Vertices Çeyrek daire köşeleri ekle @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TeknikÇizim - + Show/Hide Invisible Edges Görünmez kenarları Gizle/Göster @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TeknikÇizim - - + + Turn View Frames On/Off Görünüm Çerçevelerini Aç / Kapat @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TeknikÇizim - + Add Welding Information to Leaderline Başlık Çizgisine Kaynak Bilgileri Ekle @@ -848,7 +848,17 @@ Sayfayı dxf olarak kaydedin - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Çeyrek daire köşeleri ekle + + + Create Annotation Açıklama Oluşturun @@ -865,17 +875,17 @@ Ölçü Oluştur - + Create Hatch Tarama Oluştur - + Create GeomHatch GeoTarama oluştur - + Create Image Resim oluştur @@ -906,7 +916,12 @@ MerkezÇizgisi Oluştur - + + Create Cosmetic Line + Yardımcı çizgi oluştur + + + Update CosmeticLine YardımcıÇizgiyi Güncelle @@ -965,6 +980,11 @@ Edit WeldSymbol KaynakSembolünü Düzenle + + + Add Cosmetic Vertex + Yardımcı Nokta Ekle + MRichTextEdit @@ -1181,22 +1201,22 @@ Belge kaynağı - + Create a link Bir bağlantı oluştur - + Link URL: Bağlantı URL'si: - + Select an image Bir resim seç - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tümü (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Hatalı seçim @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Yanlış seçim @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Yanlış seçim @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Çizgi için bir temel görünüm seçmelisiniz. - + No DrawViewPart objects in this selection Bu seçimde GörünümParçasıÇiz nesneleri yok - - + + No base View in Selection. Seçimde temel görünüm yok. - + You must select Faces or an existing CenterLine. Yüzey yada mevcut merkez doğrusu(CenterLine) seçiniz. - + No CenterLine in selection. Seçimde merkez doğrusu(CenterLine) yok. - - - + + + Selection is not a CenterLine. Seçim bir merkez doğrusu(CenterLine) değil. - + Selection not understood. Seçim anlaşılmadı. - + You must select 2 Vertexes or an existing CenterLine. 2 nokta yada mevcut merkez doğrusu(CenterLine) seçiniz. - + Need 2 Vertices or 1 CenterLine. 2 köse yada bir merkez doğrusu(CenterLine) ye ihtiyaç var. - + Selection is empty. Seçim boş. - + Not enough points in selection. Seçimde yeterli nokta yok. - + Selection is not a Cosmetic Line. Seçim bir yardımcı doğru değil. - + You must select 2 Vertexes. 2 Nokta seçmelisiniz. - + No View in Selection. Seçimde görünüm yok. - + You must select a View and/or lines. Bir görünüm ve/veya çizgi seçmelisin. - + No Part Views in this selection Bu seçimde Parça Görünümü yok - + Select exactly one Leader line or one Weld symbol. Tam olarak bir lider hattı(Leader line) yada bir kaynak(Weld) sembolü seçiniz. - - + + Nothing selected Seçili hiçbir şey yok - + At least 1 object in selection is not a part view Seçimdeki en az 1 nesne bir parça görünümü değil - + Unknown object type in selection Seçimde bilinmeyen nesne tipi var - + Replace Hatch? Kapak değiştirilsin mi? - + Some Faces in selection are already hatched. Replace? Seçimdeki bazı Yüzler zaten taralı. Değiştirilsin mi? - + No TechDraw Page TechDraw sayfa yok - + Need a TechDraw Page for this command Bu komut için bir TechDraw sayfa gerekiyor - + Select a Face first Önce bir etki alanı seçin - + No TechDraw object in selection TechDraw nesne seçimi yok - + Create a page to insert. İçeri aktarmak için bir sayfa oluşturun. - - + + No Faces to hatch in this selection Seçim içinde taranacak yüzey bulunmuyor @@ -1795,6 +1815,7 @@ Zengin metin oluşturucusu + Rich text editor @@ -2973,8 +2994,8 @@ Multiplier of 'Font Size' Whether or not a page's 'Keep Updated' property can override the global 'Update With 3D' parameter - Whether or not a page's 'Keep Updated' property -can override the global 'Update With 3D' parameter + Her durumda, sayfanın 'Güncel Tut' özelliği, +küresel '3B İle Güncelle ' değişkeni üzerine yazılır @@ -3338,7 +3359,7 @@ Hızlıdır ama sonucu, kısa düz çizgilerin derlemesidir. Default scale for views if 'View Scale Type' is 'Custom' - Default scale for views if 'View Scale Type' is 'Custom' + 'Görünüş Ölçek Türü' 'Özel' ise varsayılan görünüş ölçeği @@ -3454,7 +3475,7 @@ Devam etmek istiyor musun? Save Dxf File - Save Dxf File + Dxf dosyasını kaydet @@ -3467,6 +3488,14 @@ Devam etmek istiyor musun? Seçili: + + TechDrawGui::QGIViewAnnotation + + + Text + Metin + + TechDrawGui::SymbolChooser @@ -3825,17 +3854,17 @@ Devam etmek istiyor musun? Y - + Pick a point for cosmetic vertex Yardımcı nokta için bir hedef seçin - + Left click to set a point Bir nokta ayarlamak için sol tıkla - + In progress edit abandoned. Start over. Devam eden düzenleme terk edildi. Yeniden başla. @@ -5020,7 +5049,7 @@ gösterimleri otomatik dağıtır TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 2 Çizgi arasına Eksen Çizgisi ekler @@ -5028,7 +5057,7 @@ gösterimleri otomatik dağıtır TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 2 Nokta arasında Eksen Çizgisi ekler @@ -5044,7 +5073,7 @@ gösterimleri otomatik dağıtır TechDraw_FaceCenterLine - + Adds a Centerline to Faces Yüzlere Eksen Çizgisi ekler diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm index 02f7f88a11..8b27d4e748 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 08e4e66eaf..f577fa982a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Додати центрлінію між 2 лініями @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Додати центрлінію між 2 точками @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw ТехМалюнок - + Add Centerline between 2 Lines Додати центрлінію між 2 лініями @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw ТехМалюнок - + Add Centerline between 2 Points Додати центрлінію між 2 точками @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw ТехМалюнок - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw ТехМалюнок - + Insert Annotation Вставити нотатку @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw ТехМалюнок - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw ТехМалюнок - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw ТехМалюнок - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw ТехМалюнок - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw ТехМалюнок - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw ТехМалюнок - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw ТехМалюнок - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw ТехМалюнок - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Обрати файл зображення - + Image (*.png *.jpg *.jpeg) Зображення (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw ТехМалюнок - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw ТехМалюнок - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw ТехМалюнок - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw ТехМалюнок - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw ТехМалюнок - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Зберегти сторінку в dxf файл - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Створити розмір - + Create Hatch Створити штрихування - + Create GeomHatch Create GeomHatch - + Create Image Створити зображення @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Некоректний вибір @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Некоректний вибір @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Оберіть поверхню першою - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. Створити сторінку для вставки. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? Вибрано: + + TechDrawGui::QGIViewAnnotation + + + Text + Текст + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm index 6d673bd81c..d614d0d751 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index cb91793c61..d144e29701 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afig una línia central entre 2 punts @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afig una línia central entre 2 punts @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix Anotació @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix una línia central - + Add Centerline to Faces Afig una línia central les cares @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Elimina un objecte cosmètic @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afig un vèrtex cosmètic @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afig una línia central les cares @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Aplica trama geomètrica a la cara @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File Tramat d'una cara utilitzant un fitxer d'imatges @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Insereix una imatge de mapa de bits - - + + Insert Bitmap from a file into a page Insereix una imatge de mapa de bits d'un fitxer en una pàgina - + Select an Image File Selecciona un fitxer d'imatge - + Image (*.png *.jpg *.jpeg) Imatge (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afig vèrtex de punt central @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afig vèrtexs de quadrant @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off Activa o desactiva els marcs de la vista @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afig la informació de soldadura a la línia guia @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Afig vèrtexs de quadrant + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Afig un vèrtex cosmètic + MRichTextEdit @@ -1181,22 +1201,22 @@ Font del document - + Create a link Crea un enllaç - + Link URL: URL de l'enllaç: - + Select an image Seleccioneu una imatge - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Tot (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Selecció incorrecta @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Selecció incorrecta @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Selecció incorrecta @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entés la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + No Part Views in this selection No hi ha cap vista de peça en la selecció. - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte eln la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció - + Replace Hatch? Voleu reemplaçar la trama? - + Some Faces in selection are already hatched. Replace? Algunes cares en la selecció ja tenen trama. Voleu reemplaçar-les? - + No TechDraw Page No hi ha cap pàgina TechDraw - + Need a TechDraw Page for this command Es necessita una pàgina TechDraw per a aquesta ordre - + Select a Face first Seleccioneu primer una cara - + No TechDraw object in selection No hi ha cap objecte TechDraw en la selecció - + Create a page to insert. Creeu una pàgina per a inserir. - - + + No Faces to hatch in this selection No hi ha cares on aplicar el tramat en aquesta selecció @@ -1795,6 +1815,7 @@ Creador de text enriquit + Rich text editor @@ -3462,6 +3483,14 @@ Do you want to continue? Seleccionat: + + TechDrawGui::QGIViewAnnotation + + + Text + Text + + TechDrawGui::SymbolChooser @@ -3819,17 +3848,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Selecciona un punt per al vèrtex cosmètic - + Left click to set a point Feu clic al botó esquerre per a definir un punt - + In progress edit abandoned. Start over. S'ha abandonat l'edició en procés. Torna a començar. @@ -5014,7 +5043,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afig una línia central entre 2 línies @@ -5022,7 +5051,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afig una línia central entre 2 punts @@ -5038,7 +5067,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afig una línia central a una cara diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm index de91e82cdd..51666b1818 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts index 2d19da5f92..77a05cad12 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline between 2 Lines Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline between 2 Points Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Vẽ Công nghệ - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Vẽ Công nghệ - + Insert Annotation Chèn chú thích @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Vẽ Công nghệ - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Vẽ Công nghệ - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Vẽ Công nghệ - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw Vẽ Công nghệ - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Vẽ Công nghệ - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw Vẽ Công nghệ - + Apply Geometric Hatch to Face Áp dụng vẽ họa tiết cho bề mặt @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw Vẽ Công nghệ - + Hatch a Face using Image File Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw Vẽ Công nghệ - + Insert Bitmap Image Insert Bitmap Image - - + + Insert Bitmap from a file into a page Insert Bitmap from a file into a page - + Select an Image File Chọn một tệp ảnh - + Image (*.png *.jpg *.jpeg) Hình ảnh (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw Vẽ Công nghệ - + Add Midpoint Vertices Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw Vẽ Công nghệ - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw Vẽ Công nghệ - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw Vẽ Công nghệ - - + + Turn View Frames On/Off Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw Vẽ Công nghệ - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image Create Image @@ -906,7 +916,12 @@ Create CenterLine - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection Lựa chọn không đúng @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Lựa chọn không đúng @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page Không có trang Vẽ Công nghệ - + Need a TechDraw Page for this command Cần một trang Vẽ Công nghệ cho lệnh này - + Select a Face first Chọn một Mặt trước - + No TechDraw object in selection Chưa chọn đối tượng Vẽ Công nghệ - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3473,6 +3494,14 @@ Bạn có muốn tiếp tục? Đã chọn: + + TechDrawGui::QGIViewAnnotation + + + Text + Văn bản + + TechDrawGui::SymbolChooser @@ -3831,17 +3860,17 @@ Bạn có muốn tiếp tục? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5026,7 +5055,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5034,7 +5063,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5050,7 +5079,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm index 2f96465ccc..5b55497162 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index bbeb4ea70d..28b2e1a354 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 在 2 点之间添加中心线 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw 制图 - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw 制图 - + Add Centerline between 2 Points 在 2 点之间添加中心线 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw 制图 - + Add Cosmetic Line Through 2 Points 通过 2 点添加修饰线 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw 制图 - + Insert Annotation 插入批注 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw 制图 - + Insert Center Line 插入中心线 - + Add Centerline to Faces 添加中心线到面 @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw 制图 - + Remove Cosmetic Object 移除饰性对象 @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw 制图 - + Add Cosmetic Vertex 添加饰品顶点 @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw 制图 - + Change Appearance of Lines 更改线的外观 - + Change Appearance of selected Lines 更改所选线条外观 @@ -346,7 +346,7 @@ Save Dxf File - Save Dxf File + 保存为 Dxf 文件 @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw 制图 - + Add Centerline to Faces 添加中心线到面 @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw 制图 - + Apply Geometric Hatch to Face 将几何剖面线应用于面 @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw 制图 - + Hatch a Face using Image File 使用图像文件为面打剖面线 @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw 制图 - + Insert Bitmap Image 插入位图 - - + + Insert Bitmap from a file into a page 从文件插入位图到页面 - + Select an Image File 选择图像文件 - + Image (*.png *.jpg *.jpeg) 图像 (*. png *. jpg *. jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw 制图 - + Add Midpoint Vertices 添加中点 @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw 制图 - + Add Quadrant Vertices 添加象限顶点 @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw 制图 - + Show/Hide Invisible Edges 显示/隐藏不可见边缘 @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw 制图 - - + + Turn View Frames On/Off 打开或关闭视图框 @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw 制图 - + Add Welding Information to Leaderline 向指引线添加焊接信息 @@ -848,7 +848,17 @@ 保存页面到 dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + 添加象限顶点 + + + Create Annotation 创建批注 @@ -865,17 +875,17 @@ 创建尺寸 - + Create Hatch 创建剖面线 - + Create GeomHatch 创建 GeomHatch - + Create Image 创建图像 @@ -906,7 +916,12 @@ 创建中心线 - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine 更新饰品线 @@ -965,6 +980,11 @@ Edit WeldSymbol 编辑焊接符号 + + + Add Cosmetic Vertex + 添加饰品顶点 + MRichTextEdit @@ -1181,22 +1201,22 @@ 文档来源 - + Create a link 创建链接 - + Link URL: 链接地址： - + Select an image 选择图片 - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; 所有 (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1312,7 +1332,7 @@ Can not export selection - Can not export selection + 无法导出所选对象 @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection 选择错误 @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection 选择错误 @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,29 +1541,29 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection - Wrong Selection + 错误选择。 @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. 您必须为该线选择一个基视图。 - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. 在选择中没有基本视图。 - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. - Selection is empty. + 没有选择对象。 - + Not enough points in selection. - Not enough points in selection. + 没有选择足够的点。 - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. - You must select 2 Vertexes. + 你必须选择两个交点。 - + No View in Selection. - No View in Selection. + 选择中没有视图。 - + You must select a View and/or lines. - You must select a View and/or lines. + 您必须选择一个视图（或多个线条）。 - + No Part Views in this selection - No Part Views in this selection + 选择中没有部件视图。 - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected 未选择任何内容 - + At least 1 object in selection is not a part view 至少一个所选对象不是零件视图 - + Unknown object type in selection 选择了未知的对象类型 - + Replace Hatch? 替换剖面线? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page 无 TechDraw 页 - + Need a TechDraw Page for this command 此命令需要TechDraw 页 - + Select a Face first 先选择一个面 - + No TechDraw object in selection 选择中没有 TechDraw 对象 - + Create a page to insert. 创建一个插入页面. - - + + No Faces to hatch in this selection 在此选择中没有面可以填充剖面线 @@ -1724,7 +1744,7 @@ Select only 1 page. - Select only 1 page. + 仅选择了1页。 @@ -1762,7 +1782,7 @@ Are you sure you want to continue? - Are you sure you want to continue? + 您确定要继续吗？ @@ -1795,6 +1815,7 @@ 富文本生成器 + Rich text editor @@ -1982,7 +2003,7 @@ it has a tile weld that would become broken. Width of generated view - Width of generated view + 生成视图的宽度。 @@ -1992,7 +2013,7 @@ it has a tile weld that would become broken. Height of generated view - Height of generated view + 生成视图的高度。 @@ -3457,7 +3478,7 @@ Do you want to continue? Save Dxf File - Save Dxf File + 保存为 Dxf 文件 @@ -3470,6 +3491,14 @@ Do you want to continue? 已选择: + + TechDrawGui::QGIViewAnnotation + + + Text + 文本 + + TechDrawGui::SymbolChooser @@ -3828,17 +3857,17 @@ Do you want to continue? Y - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point 左键单击以设置点 - + In progress edit abandoned. Start over. 放弃当前编辑。重新开始。 @@ -5023,7 +5052,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 在两线之间添加中心线 @@ -5031,7 +5060,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 在 2 点之间添加中心线 @@ -5047,7 +5076,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm index 1442c34e74..be64393744 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index 0cf9b37e4c..386111d3e7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 在兩條線中加入中心線 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 加入中心線在兩點間 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 在兩條線中加入中心線 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 加入中心線在兩點間 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 插入註釋 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw TechDraw - + Apply Geometric Hatch to Face Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw TechDraw - + Hatch a Face using Image File 使用圖像檔產生一張臉 @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image 插入點陣圖片 - - + + Insert Bitmap from a file into a page 由一個檔案案插入點陣圖到一頁 - + Select an Image File 選擇一個影像檔 - + Image (*.png *.jpg *.jpeg) 影像 (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 加入頂點的中心點 @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw - - + + Turn View Frames On/Off 開/關 視圖幀 @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -848,7 +848,17 @@ Save page to dxf - + + Add Midpont Vertices + Add Midpont Vertices + + + + Add Quadrant Vertices + Add Quadrant Vertices + + + Create Annotation Create Annotation @@ -865,17 +875,17 @@ Create Dimension - + Create Hatch Create Hatch - + Create GeomHatch Create GeomHatch - + Create Image 建立圖片 @@ -906,7 +916,12 @@ 建立中心線 - + + Create Cosmetic Line + Create Cosmetic Line + + + Update CosmeticLine Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol Edit WeldSymbol + + + Add Cosmetic Vertex + Add Cosmetic Vertex + MRichTextEdit @@ -1181,22 +1201,22 @@ 文件来源 - + Create a link 建立超連結 - + Link URL: 連結URL: - + Select an image 選擇一張圖片 - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection 不正確的選取 @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. You must select a base View for the line. - + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + Replace Hatch? Replace Hatch? - + Some Faces in selection are already hatched. Replace? Some Faces in selection are already hatched. Replace? - + No TechDraw Page No TechDraw Page - + Need a TechDraw Page for this command Need a TechDraw Page for this command - + Select a Face first Select a Face first - + No TechDraw object in selection No TechDraw object in selection - + Create a page to insert. 創建要插入的頁面。 - - + + No Faces to hatch in this selection No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ Rich text creator + Rich text editor @@ -3471,6 +3492,14 @@ Do you want to continue? 已選： + + TechDrawGui::QGIViewAnnotation + + + Text + 文字 + + TechDrawGui::SymbolChooser @@ -3829,17 +3858,17 @@ Do you want to continue? Ÿ - + Pick a point for cosmetic vertex Pick a point for cosmetic vertex - + Left click to set a point Left click to set a point - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -5024,7 +5053,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -5032,7 +5061,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -5048,7 +5077,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces diff --git a/src/Mod/Test/Gui/Resources/translations/Test_uk.qm b/src/Mod/Test/Gui/Resources/translations/Test_uk.qm index 7501174682..2d4d120f37 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_uk.qm and b/src/Mod/Test/Gui/Resources/translations/Test_uk.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_uk.ts b/src/Mod/Test/Gui/Resources/translations/Test_uk.ts index 3b169f54ae..54c906b3bb 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_uk.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_uk.ts @@ -127,7 +127,7 @@ Double click on an error in the tree view to see more information about it, incl Copyright (c) Werner Mayer FreeCAD UnitTest is part of FreeCAD and supports writing Unit Tests for ones own modules. - Copyright (c) Вернер Майер (Werner Mayer) FreeCAD UnitTest є частиною FreeCAD і підтримує написання Unit Tests для них власних модулів. + Copyright (c) Вернер Майер (Werner Mayer) FreeCAD UnitTest є частиною FreeCAD і підтримує написання Unit Tests для тих власних модулів. diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.qm b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm index 50dedbd067..aa11833829 100644 Binary files a/src/Mod/Web/Gui/Resources/translations/Web_cs.qm and b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts index 9899ab0b51..97641b21a2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts @@ -156,7 +156,7 @@ There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. + Při načítání souboru došlo k vážným chybám. Některá data mohla být změněna nebo vůbec neobnovena. Uložení projektu s největší pravděpodobností povede ke ztrátě dat.