diff --git a/src/App/Resources/App.qrc b/src/App/Resources/App.qrc index f8afccc7f1..abbfa2162b 100644 --- a/src/App/Resources/App.qrc +++ b/src/App/Resources/App.qrc @@ -32,5 +32,6 @@ App_ro.qm App_gl.qm App_ko.qm + App_id.qm diff --git a/src/App/Resources/translations/App_cs.ts b/src/App/Resources/translations/App_cs.ts index 6730d8fdcf..7a45bf75fe 100644 --- a/src/App/Resources/translations/App_cs.ts +++ b/src/App/Resources/translations/App_cs.ts @@ -7,8 +7,8 @@ Stores the last user choice of whether to apply CopyOnChange setup to all links that reference the same configurable object - Stores the last user choice of whether to apply CopyOnChange setup to all links -that reference the same configurable object + Ukládá poslední uživatelskou volbu, zda použít nastavení „Kopírovat při změně“ na všechny odkazy +které odkazují na stejný konfigurovatelný objekt diff --git a/src/App/Resources/translations/App_id.qm b/src/App/Resources/translations/App_id.qm new file mode 100644 index 0000000000..fd985edbf7 Binary files /dev/null and b/src/App/Resources/translations/App_id.qm differ diff --git a/src/App/Resources/translations/App_id.ts b/src/App/Resources/translations/App_id.ts new file mode 100644 index 0000000000..4b5d083022 --- /dev/null +++ b/src/App/Resources/translations/App_id.ts @@ -0,0 +1,22 @@ + + + + + LinkParams + + + Stores the last user choice of whether to apply CopyOnChange setup to all links +that reference the same configurable object + Stores the last user choice of whether to apply CopyOnChange setup to all links +that reference the same configurable object + + + + QObject + + + Unnamed + Tanpa nama + + + diff --git a/src/App/Resources/translations/App_it.ts b/src/App/Resources/translations/App_it.ts index ee3797786e..2b9591bdd8 100644 --- a/src/App/Resources/translations/App_it.ts +++ b/src/App/Resources/translations/App_it.ts @@ -7,8 +7,8 @@ Stores the last user choice of whether to apply CopyOnChange setup to all links that reference the same configurable object - Stores the last user choice of whether to apply CopyOnChange setup to all links -that reference the same configurable object + Memorizza l'ultima scelta dell'utente se applicare l'impostazione CopyOnChange a tutti i link +che fanno riferimento allo stesso oggetto configurabile diff --git a/src/App/Resources/translations/App_ro.ts b/src/App/Resources/translations/App_ro.ts index d610990155..34358b0a8e 100644 --- a/src/App/Resources/translations/App_ro.ts +++ b/src/App/Resources/translations/App_ro.ts @@ -7,8 +7,8 @@ Stores the last user choice of whether to apply CopyOnChange setup to all links that reference the same configurable object - Stores the last user choice of whether to apply CopyOnChange setup to all links -that reference the same configurable object + Stochează ultima alegere a utilizatorului de a aplica CopyOnChange setup la toate link-urile +care fac referire la același obiect configurabil diff --git a/src/App/Resources/translations/App_tr.ts b/src/App/Resources/translations/App_tr.ts index 689a09bf21..eb1e97b102 100644 --- a/src/App/Resources/translations/App_tr.ts +++ b/src/App/Resources/translations/App_tr.ts @@ -7,8 +7,8 @@ Stores the last user choice of whether to apply CopyOnChange setup to all links that reference the same configurable object - Stores the last user choice of whether to apply CopyOnChange setup to all links -that reference the same configurable object + Aynı yapılandırılabilir nesneye başvuran tüm bağlantılara CopyOnChange kurulumunun uygulanıp +uygulanmayacağına ilişkin son kullanıcı seçimini saklar diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index e68f0ff265..67a4b7dee8 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Upravit obrázek @@ -1239,7 +1239,7 @@ Pokud toto není zaškrtnuto, musí být vlastnost pojmenována jedinečně a bu To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Chcete-li změnit aktuální zkratku, zadejte novou zkratku do pole níže a stiskněte 'Přiřadit'. @@ -2000,12 +2000,12 @@ bude vždy vypsána tečka/tečka. Language and number format - Language and number format + Jazyk a formát čísel Language: - Language: + Jazyk: @@ -2015,7 +2015,7 @@ bude vždy vypsána tečka/tečka. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Jednotkový systém, který by měl být použit pro všechny části aplikace @@ -2040,7 +2040,7 @@ bude vždy vypsána tečka/tečka. Substitute decimal separator - Substitute decimal separator + Nahraďte desetinný oddělovač @@ -2085,14 +2085,14 @@ podle velikosti obrazovky nebo osobní preference Size of recent file list: - Size of recent file list: + Velikost seznamu posledních souborů: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Pozadí hlavního okna (když není otevřen žádný dokument) se bude skládat z dlaždic speciálního obrázku. +Podrobnosti o obrázku najdete na FreeCAD Wiki. @@ -2851,22 +2851,22 @@ Specify another directory, please. Restart required - Restart required + Je vyžadován restart You must restart FreeCAD for changes to take effect. - You must restart FreeCAD for changes to take effect. + Aby se změny projevily, musíte FreeCAD restartovat. Restart now - Restart now + Restartovat nyní Restart later - Restart later + Restartovat později @@ -3027,12 +3027,12 @@ Specify another directory, please. Failed to extract project - Failed to extract project + Projekt se nepodařilo extrahovat Failed to create project - Failed to create project + Projekt se nepodařilo vytvořit @@ -3682,12 +3682,12 @@ ohraničujícího kvádru 3D objektů, které jsou zobrazeny. Daily - Daily + Denně Weekly - Weekly + Týdně @@ -3702,7 +3702,7 @@ ohraničujícího kvádru 3D objektů, které jsou zobrazeny. Never - Never + Nikdy @@ -4995,9 +4995,8 @@ místo v konzoli Pythonu Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - + Oblast pro výběr prvků ve 3D pohledu. +Vyšší hodnota usnadňuje výběr věcí, ale může znemožnit výběr malých funkcí. @@ -5087,24 +5086,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Lineární gradient Radial gradient - Radial gradient + Radiální přechod Top: - Top: + Horní: Middle: - Middle: + Střední: @@ -5130,7 +5129,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Dole: @@ -5160,17 +5159,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Centrální: Midway: - Midway: + Uprostřed: End: - End: + Konec: @@ -6211,7 +6210,7 @@ původně vybranými před otevřením tohoto dialogu Critical messages - Critical messages + Kritická zpráva @@ -8008,22 +8007,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Zobrazit položky skryté ve stromovém zobrazení Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Zobrazit položky, které jsou označeny jako 'skryté' ve stromovém zobrazení Toggle visibility in tree view - Toggle visibility in tree view + Přepnout viditelnost ve stromovém zobrazení Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Přepíná viditelnost vybraných položek ve stromovém zobrazení @@ -8418,7 +8417,7 @@ Do you want to specify another directory? Python - Python + Python @@ -8661,7 +8660,7 @@ Do you want to continue? Save image - Save image + Uložit obrázek @@ -8778,18 +8777,18 @@ Do you want to continue? Notifier - Notifier + Oznamovatel Message - Message + Zpráva Notifier: - Notifier: + Oznamovatel: @@ -8804,7 +8803,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Příliš mnoho otevřených nerušivých oznámení. Oznámení jsou vynechána! @@ -9353,7 +9352,7 @@ na aktuální kopii budou ztraceny. Change image... - Change image... + Změnit obrázek... @@ -11737,7 +11736,7 @@ na aktuální kopii budou ztraceny. Save image... - Save image... + Uložit obrázek... @@ -12040,7 +12039,7 @@ Chcete pokračovat? Clipboard - Clipboard + Schránka @@ -12157,7 +12156,7 @@ Chcete pokračovat? Notification Area - Notification Area + Oznamovací oblast @@ -12167,32 +12166,32 @@ Chcete pokračovat? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Ve stavovém řádku se zobrazí oznamovací oblast Enable Notification Area - Enable Notification Area + Povolit oblast oznámení Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Nerušivá oznámení se zobrazí vedle oznamovací oblasti ve stavovém řádku Enable non-intrusive notifications - Enable non-intrusive notifications + Povolit nevtíravá oznámení Additional data Sources - Additional data Sources + Další zdroje dat Errors will appear in the notification area - Errors will appear in the notification area + Chyby se objeví v oznamovací oblasti @@ -12202,7 +12201,7 @@ Chcete pokračovat? Warnings will appear in the notification area - Warnings will appear in the notification area + V oznamovací oblasti se zobrazí varování @@ -12212,22 +12211,22 @@ Chcete pokračovat? Non-Intrusive Notifications - Non-Intrusive Notifications + Nerušivá oznámení Minimum Duration: - Minimum Duration: + Minimální doba: Maximum Duration: - Maximum Duration: + Maximální doba: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Doba, po kterou se bude upozornění zobrazovat (pokud nekliknete na tlačítka myši) @@ -12238,77 +12237,77 @@ Chcete pokračovat? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Minimální doba, po kterou se bude oznámení zobrazovat (pokud nekliknete na oznámení) Maximum Number of Notifications: - Maximum Number of Notifications: + Maximální počet oznámení: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Maximální počet oznámení, která budou současně přítomna na obrazovce Notification width: - Notification width: + Oznamovací oblast: Width of the notification in pixels - Width of the notification in pixels + Šířka oznámení v pixelech Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Všechna otevřená nerušivá oznámení zmizí, když se aktivuje další okno Hide when other window is activated - Hide when other window is activated + Skrýt, když je aktivováno jiné okno Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Zabraňte zobrazování nevtíravých oznámení, když okno FreeCAD není aktivním oknem Do not show when inactive - Do not show when inactive + Nezobrazovat, když je neaktivní Message List - Message List + Seznam zpráv Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Omezte počet zpráv, které budou v seznamu zachovány. Pokud je 0, neexistuje žádný limit. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maximální počet zpráv (0 = bez omezení): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Odebere uživatelská upozornění ze seznamu zpráv po uplynutí nerušivé maximální doby trvání. Auto-remove User Notifications - Auto-remove User Notifications + Automaticky odebrat upozornění uživatele Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Aktivace oznamovací oblasti se projeví až po restartu aplikace. @@ -12322,13 +12321,13 @@ Chcete pokračovat? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Pořadí pracovních ploch můžete změnit přetažením. Další pracovní plochy lze nainstalovat prostřednictvím správce doplňků.</p><p> +V současné době má váš systém následující pracovní plochy:</p></body></html> Start up workbench: - Start up workbench: + Spustit pracovní úroveň: @@ -12376,7 +12375,7 @@ po spuštění FreeCADu Planes - Planes + Rovina @@ -12409,12 +12408,12 @@ po spuštění FreeCADu Image plane settings - Image plane settings + Nastavení prohlížeče obrázků Planes - Planes + Rovina @@ -12444,27 +12443,27 @@ po spuštění FreeCADu X distance: - X distance: + X vzdálenost: Y distance: - Y distance: + Y vzdálenost: Rotation : - Rotation : + Rotace : Transparency : - Transparency : + Průhlednost : Image size - Image size + Velikost obrazu @@ -12479,12 +12478,12 @@ po spuštění FreeCADu Keep aspect ratio - Keep aspect ratio + Zachovat poměr stran Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Interaktivně měřítko obrázku nastavením délky mezi dvěma body obrázku. @@ -12494,7 +12493,7 @@ po spuštění FreeCADu Calibration - Calibration + Kalibrace @@ -12512,7 +12511,7 @@ po spuštění FreeCADu Color Gradient - Color Gradient + Barevný přechod @@ -12520,27 +12519,27 @@ po spuštění FreeCADu If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Pokud není zaškrtnuto, %1 se nezobrazí v dostupných pracovních plochách. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Toto je aktuální spouštěcí modul a musí být povolen. Pro změnu viz Preference/General/Autoload. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Zkratka pro aktivaci tohoto pracovního stolu. Auto-load - Auto-load + Automatické načítání If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Je-li zaškrtnuto, %1 se načte automaticky při spuštění FreeCADu @@ -12560,7 +12559,7 @@ po spuštění FreeCADu To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Pro zachování zdrojů FreeCAD nenačítá pracovní plochy, dokud nejsou použity. Jejich načtení může poskytnout přístup k dalším předvolbám souvisejícím s jejich funkčností. @@ -12586,7 +12585,7 @@ po spuštění FreeCADu Color Legend - Color Legend + Barva Legenda @@ -12599,12 +12598,12 @@ po spuštění FreeCADu Delete user notifications - Delete user notifications + Smazat uživatelská upozornění Delete All - Delete All + Smazat vše @@ -12612,12 +12611,12 @@ po spuštění FreeCADu Delete user notifications - Delete user notifications + Smazat uživatelská upozornění Delete All - Delete All + Smazat vše @@ -12625,17 +12624,17 @@ po spuštění FreeCADu Failed to load image file - Failed to load image file + Soubor obrázku se nepodařilo načíst Cannot load file %1: %2 - Cannot load file %1: %2 + Nelze načíst soubor %1: %2 Fit to window - Fit to window + Přizpůsobit oknu @@ -12653,13 +12652,13 @@ po spuštění FreeCADu Load image... - Load image... + Načítání obrázků... Loads an image - Loads an image + Načte obrázek @@ -12667,32 +12666,32 @@ po spuštění FreeCADu FRONT - FRONT + PŘEDNÍ REAR - REAR + ZADNÍ TOP - TOP + VRŠEK BOTTOM - BOTTOM + SPODEK RIGHT - RIGHT + VPRAVO LEFT - LEFT + VLEVO @@ -12700,7 +12699,7 @@ po spuštění FreeCADu Enter desired distance between the points - Enter desired distance between the points + Zadejte požadovanou vzdálenost mezi body diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 8593901be5..73c136792a 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Bild bearbeiten @@ -1239,7 +1239,7 @@ Wenn dies nicht ausgewählt ist, muss die Eigenschaft eindeutig benannt sein und To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Um das aktuelle Tastenkürzel zu ändern, geben Sie unten ein neues ein und klicken Sie 'Zuweisen'. @@ -1998,12 +1998,12 @@ dot/period will always be printed. Language and number format - Language and number format + Sprach- und Zahlenformat Language: - Language: + Sprache: @@ -2013,7 +2013,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Verwendete Einheiten für alle Teile der Anwendung @@ -2038,7 +2038,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + Dezimaltrennzeichen ersetzen @@ -2083,14 +2083,14 @@ entsprechend Ihrer Bildschirmgröße oder Ihrem persönlichen Geschmack anpassen Size of recent file list: - Size of recent file list: + Anzahl der zuletzt benutzten Dateien: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Der Hintergrund des Hauptfensters (wenn kein Dokument geöffnet ist) besteht aus Kacheln eines speziellen Bildes. +Sehen Sie sich das FreeCAD Wiki für Details über das Bild an. @@ -2849,7 +2849,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Restart required - Restart required + Neustart erforderlich @@ -3025,12 +3025,12 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Failed to extract project - Failed to extract project + Projekt konnte nicht extrahiert werden Failed to create project - Failed to create project + Projekt konnte nicht erstellt werden @@ -5080,24 +5080,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Linearer Verlauf Radial gradient - Radial gradient + Radialer Verlauf Top: - Top: + Oben: Middle: - Middle: + Mitte: @@ -5123,7 +5123,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Unten: @@ -8003,22 +8003,22 @@ Möchten Sie ein anderes Verzeichnis angeben? Show items hidden in tree view - Show items hidden in tree view + In der Baumansicht ausgeblendete Elemente anzeigen Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Elemente anzeigen, die in der Baumansicht als 'ausgeblendet' gekennzeichnet sind Toggle visibility in tree view - Toggle visibility in tree view + Sichtbarkeit in der Baumansicht umschalten Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Schaltet die Sichtbarkeit ausgewählter Elemente in der Baumansicht um @@ -8657,7 +8657,7 @@ Wollen Sie fortfahren? Save image - Save image + Bild speichern @@ -8780,7 +8780,7 @@ Wollen Sie fortfahren? Message - Message + Nachricht @@ -8800,7 +8800,7 @@ Wollen Sie fortfahren? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Zu viele offene, unaufdringliche Benachrichtigungen. Benachrichtigungen werden ausgelassen! @@ -9346,7 +9346,7 @@ the current copy will be lost. Change image... - Change image... + Bild ändern... @@ -11730,7 +11730,7 @@ the current copy will be lost. Save image... - Save image... + Bild speichern... @@ -12033,7 +12033,7 @@ Möchten Sie trotzdem fortfahren? Clipboard - Clipboard + Zwischenablage @@ -12150,7 +12150,7 @@ Möchten Sie trotzdem fortfahren? Notification Area - Notification Area + Benachrichtigungsbereich @@ -12160,32 +12160,32 @@ Möchten Sie trotzdem fortfahren? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Der Benachrichtigungsbereich wird in der Statusleiste angezeigt Enable Notification Area - Enable Notification Area + Benachrichtigungsbereich aktivieren Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Unaufdringliche Benachrichtigungen werden neben dem Benachrichtigungsbereich in der Statusleiste angezeigt Enable non-intrusive notifications - Enable non-intrusive notifications + Unaufdringliche Benachrichtigungen aktivieren Additional data Sources - Additional data Sources + Zusätzliche Datenquellen Errors will appear in the notification area - Errors will appear in the notification area + Fehler werden im Benachrichtigungsbereich angezeigt @@ -12195,7 +12195,7 @@ Möchten Sie trotzdem fortfahren? Warnings will appear in the notification area - Warnings will appear in the notification area + Warnungen werden im Benachrichtigungsbereich angezeigt @@ -12205,22 +12205,22 @@ Möchten Sie trotzdem fortfahren? Non-Intrusive Notifications - Non-Intrusive Notifications + Unaufdringliche Benachrichtigungen Minimum Duration: - Minimum Duration: + Mindestdauer: Maximum Duration: - Maximum Duration: + Höchstdauer: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Dauer, während der die Benachrichtigung angezeigt wird (sofern keine Maustasten geklickt werden) @@ -12231,77 +12231,77 @@ Möchten Sie trotzdem fortfahren? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Mindestdauer, während der die Benachrichtigung angezeigt wird (sofern die Benachrichtigung nicht angeklickt wurde) Maximum Number of Notifications: - Maximum Number of Notifications: + Maximale Anzahl an Benachrichtigungen: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Maximale Anzahl an Benachrichtigungen, die gleichzeitig auf dem Bildschirm angezeigt werden dürfen Notification width: - Notification width: + Benachrichtigungsbreite: Width of the notification in pixels - Width of the notification in pixels + Breite der Benachrichtigung in Pixel Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Alle offenen unaufdringlichen Benachrichtigungen verschwinden, wenn ein anderes Fenster aktiviert wird Hide when other window is activated - Hide when other window is activated + Ausblenden, wenn ein anderes Fenster aktiviert ist Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Verhindern, dass unaufdringliche Benachrichtigungen angezeigt werden, wenn das FreeCAD-Fenster nicht das aktive Fenster ist Do not show when inactive - Do not show when inactive + Bei Inaktivität nicht anzeigen Message List - Message List + Nachrichtenliste Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Begrenzt die Anzahl der Nachrichten, die in der Liste behalten werden. Bei 0 gibt es keine Begrenzung. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maximale Meldungen (0 = keine Begrenzung): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Entfernt die Benutzerbenachrichtigungen aus der Nachrichtenliste, nachdem die unaufdringliche Höchstdauer verstrichen ist. Auto-remove User Notifications - Auto-remove User Notifications + Benutzerbenachrichtigungen automatisch entfernen Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Die Aktivierung des Benachrichtigungsbereichs wird erst nach einem Neustart der Anwendung wirksam. @@ -12315,8 +12315,8 @@ Möchten Sie trotzdem fortfahren? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Arbeitsbereiche können per Drag & Drop neu geordnet werden. Weitere Arbeitsbereiche können über den Addon-Manager installiert werden.</p><p> +Zurzeit verfügt dieses System über folgende Arbeitsbereiche:</p></body></html> @@ -12368,7 +12368,7 @@ after FreeCAD launches Planes - Planes + Ebenen @@ -12401,12 +12401,12 @@ after FreeCAD launches Image plane settings - Image plane settings + Bildebenen-Einstellungen Planes - Planes + Ebenen @@ -12436,27 +12436,27 @@ after FreeCAD launches X distance: - X distance: + X-Abstand: Y distance: - Y distance: + Y-Abstand: Rotation : - Rotation : + Drehung : Transparency : - Transparency : + Tranparenz : Image size - Image size + Bildgröße @@ -12471,12 +12471,12 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + Seitenverhältnis beibehalten Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Skaliert das Bild, indem ein Abstand zwischen zwei Punkten des Bildes festgelegt wird. @@ -12486,7 +12486,7 @@ after FreeCAD launches Calibration - Calibration + Kalibrierung @@ -12504,7 +12504,7 @@ after FreeCAD launches Color Gradient - Color Gradient + Farbverlauf @@ -12512,7 +12512,7 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Wenn nicht aktiviert, wird %1 nicht unter den vorhandenen Arbeitsbereichen angezeigt. @@ -12522,17 +12522,17 @@ after FreeCAD launches Shortcut to activate this workbench. - Shortcut to activate this workbench. + Tastaturkürzel zum Aktivieren dieses Arbeitsbereichs. Auto-load - Auto-load + Automatisch laden If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Wenn aktiviert, wird %1 beim Start von FreeCAD automatisch geladen @@ -12552,7 +12552,7 @@ after FreeCAD launches To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Um Ressourcen zu schonen, lädt FreeCAD Arbeitsbereiche nicht, solange sie nicht verwendet werden. Wenn sie geladen werden, können sie Zugriff auf weitere Einstellungen bezüglich ihrer Funktionalität ermöglichen. @@ -12578,7 +12578,7 @@ after FreeCAD launches Color Legend - Color Legend + Farblegende @@ -12591,12 +12591,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Benutzerbenachrichtigungen löschen Delete All - Delete All + Alle löschen @@ -12604,12 +12604,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Benutzerbenachrichtigungen löschen Delete All - Delete All + Alle löschen @@ -12617,7 +12617,7 @@ after FreeCAD launches Failed to load image file - Failed to load image file + Bilddatei konnte nicht geladen werden @@ -12627,7 +12627,7 @@ after FreeCAD launches Fit to window - Fit to window + An das Fenster anpassen @@ -12645,13 +12645,13 @@ after FreeCAD launches Load image... - Load image... + Bild laden... Loads an image - Loads an image + Lädt ein Bild @@ -12659,32 +12659,32 @@ after FreeCAD launches FRONT - FRONT + VORNE REAR - REAR + HINTEN TOP - TOP + OBEN BOTTOM - BOTTOM + UNTEN RIGHT - RIGHT + RECHTS LEFT - LEFT + LINKS @@ -12692,7 +12692,7 @@ after FreeCAD launches Enter desired distance between the points - Enter desired distance between the points + Gewünschten Abstand zwischen den Punkten eingeben diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index 6ad89f8a79..89c89af106 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Editar imagen @@ -1240,7 +1240,7 @@ Si no está marcado, entonces la propiedad debe tener un nombre único y se acce To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Para cambiar un acceso directo actual introduzca el nuevo acceso directo en el campo de abajo y pulse 'Asignar'. @@ -1999,12 +1999,12 @@ punto. Language and number format - Language and number format + Idioma y formato numérico Language: - Language: + Idioma: @@ -2014,7 +2014,7 @@ punto. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Sistema de unidades que debe ser utilizado para todas las partes de la aplicación @@ -2039,7 +2039,7 @@ punto. Substitute decimal separator - Substitute decimal separator + Sustituir separador decimal @@ -2083,14 +2083,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + Tamaño de la lista de archivos recientes: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + El fondo de la ventana principal (cuando no se abre ningún documento) se compondrá de mosaicos de una imagen especial. +Vea la wiki de FreeCAD para más detalles sobre la imagen. @@ -2853,7 +2853,7 @@ Especifique otro directorio, por favor. Restart required - Restart required + Es necesario reiniciar @@ -3029,12 +3029,12 @@ Especifique otro directorio, por favor. Failed to extract project - Failed to extract project + Error al extraer el proyecto Failed to create project - Failed to create project + Error al crear el proyecto @@ -4989,8 +4989,8 @@ espacio horizontal disponible en la consola de Python Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Área para elegir elementos en la vista 3D. +Valor más grande facilita la selección de cosas, pero puede hacer imposible seleccionar pequeñas características. @@ -5081,24 +5081,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Gradiente lineal Radial gradient - Radial gradient + Gradiente radial Top: - Top: + Superior: Middle: - Middle: + Medio: @@ -5124,7 +5124,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Inferior: @@ -5154,17 +5154,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Central: Midway: - Midway: + Intermedio: End: - End: + Fin: @@ -6204,7 +6204,7 @@ originally selected prior to opening this dialog Critical messages - Critical messages + Mensajes críticos @@ -8002,22 +8002,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Mostrar elementos ocultos en la vista de árbol Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Mostrar elementos marcados como 'ocultos' en la vista de árbol Toggle visibility in tree view - Toggle visibility in tree view + Cambiar visibilidad en la vista de árbol Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Cambia la visibilidad de los elementos seleccionados en la vista de árbol @@ -8654,7 +8654,7 @@ Desea continuar? Save image - Save image + Guardar imagen @@ -8771,18 +8771,18 @@ Desea continuar? Notifier - Notifier + Notificador Message - Message + Mensaje Notifier: - Notifier: + Notificador: @@ -8797,7 +8797,7 @@ Desea continuar? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Demasiadas notificaciones no intrusivas abiertas. ¡Las notificaciones serán omitidas! @@ -9345,7 +9345,7 @@ la copia actual se perderá. Change image... - Change image... + Cambiar imagen... @@ -11729,7 +11729,7 @@ la copia actual se perderá. Save image... - Save image... + Guardar imagen... @@ -12032,7 +12032,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Clipboard - Clipboard + Portapapeles @@ -12149,7 +12149,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Notification Area - Notification Area + Área de notificación @@ -12159,32 +12159,32 @@ Por favor, compruebe la Vista de Reportes para más detalles. The Notification area will appear in the status bar - The Notification area will appear in the status bar + El área de notificación aparecerá en la barra de estado Enable Notification Area - Enable Notification Area + Activar área de notificación Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Las notificaciones no intrusivas aparecerán junto al área de notificación en la barra de estado Enable non-intrusive notifications - Enable non-intrusive notifications + Habilitar notificaciones no intrusivas Additional data Sources - Additional data Sources + Fuentes de datos adicionales Errors will appear in the notification area - Errors will appear in the notification area + Los errores aparecerán en el área de notificación @@ -12194,7 +12194,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Warnings will appear in the notification area - Warnings will appear in the notification area + Las advertencias aparecerán en el área de notificación @@ -12204,22 +12204,22 @@ Por favor, compruebe la Vista de Reportes para más detalles. Non-Intrusive Notifications - Non-Intrusive Notifications + Notificaciones no intrusivas Minimum Duration: - Minimum Duration: + Duración mínima: Maximum Duration: - Maximum Duration: + Duración máxima: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Duración durante la cual se mostrará la notificación (a menos que se haga clic en los botones del ratón) @@ -12230,77 +12230,77 @@ Por favor, compruebe la Vista de Reportes para más detalles. Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Duración mínima durante la cual se mostrará la notificación (a menos que se haga clic en la notificación) Maximum Number of Notifications: - Maximum Number of Notifications: + Número máximo de notificaciones: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Número máximo de notificaciones que estarán simultáneamente presentes en la pantalla Notification width: - Notification width: + Ancho de notificación: Width of the notification in pixels - Width of the notification in pixels + Ancho de la notificación en píxeles Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Cualquier notificación no intrusiva desaparecerá cuando otra ventana esté activada Hide when other window is activated - Hide when other window is activated + Ocultar cuando otra ventana está activada Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Evita que aparezcan notificaciones no intrusivas cuando la ventana de FreeCAD no es la ventana activa Do not show when inactive - Do not show when inactive + No mostrar cuando esté inactivo Message List - Message List + Lista de mensajes Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Limita el número de mensajes que se mantendrán en la lista. Si es 0 no hay límite. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Máximo de mensajes (0 = sin límite): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Elimina las notificaciones de usuario de la lista de mensajes después de que la duración máxima no intrusiva haya transcurrido. Auto-remove User Notifications - Auto-remove User Notifications + Autoeliminar notificaciones de usuario Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + La activación del Área de Notificaciones solo tendrá efecto una vez que se reinicie la aplicación. @@ -12314,13 +12314,13 @@ Por favor, compruebe la Vista de Reportes para más detalles. <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Puede reordenar los bancos de trabajo arrastrando y soltando. Los bancos de trabajo adicionales pueden instalarse a través del administrador del complemento.</p><p> +Actualmente, su sistema tiene los siguientes bancos de trabajo:</p></body></html> Start up workbench: - Start up workbench: + Iniciar banco de trabajo: @@ -12367,7 +12367,7 @@ after FreeCAD launches Planes - Planes + Planos @@ -12400,12 +12400,12 @@ after FreeCAD launches Image plane settings - Image plane settings + Ajustes de plano de imagen Planes - Planes + Planos @@ -12435,27 +12435,27 @@ after FreeCAD launches X distance: - X distance: + Distancia X: Y distance: - Y distance: + Distancia Y: Rotation : - Rotation : + Rotación: Transparency : - Transparency : + Transparencia: Image size - Image size + Tamaño de imagen @@ -12470,12 +12470,12 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + Mantener la relación de aspecto Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Escala interactivamente la imagen ajustando una longitud entre dos puntos de la imagen. @@ -12485,7 +12485,7 @@ after FreeCAD launches Calibration - Calibration + Calibración @@ -12503,7 +12503,7 @@ after FreeCAD launches Color Gradient - Color Gradient + Gradiente de color @@ -12511,27 +12511,27 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Si no se selecciona, %1 no aparecerá en los bancos de trabajo disponibles. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Este es el módulo de inicio actual y debe estar habilitado. Vea Preferencias/General/Autocarga para cambiar. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Acceso directo para activar este banco de trabajo. Auto-load - Auto-load + Autocarga If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Si está marcado, %1 se cargará automáticamente cuando FreeCAD se inicie @@ -12551,7 +12551,7 @@ after FreeCAD launches To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Para preservar recursos, FreeCAD no carga los bancos de trabajo hasta que se usen. Cargarlos puede proporcionar acceso a preferencias adicionales relacionadas con su funcionalidad. @@ -12577,7 +12577,7 @@ after FreeCAD launches Color Legend - Color Legend + Leyenda de color @@ -12590,12 +12590,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Eliminar notificaciones de usuario Delete All - Delete All + Borrar todo @@ -12603,12 +12603,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Eliminar notificaciones de usuario Delete All - Delete All + Borrar todo @@ -12616,17 +12616,17 @@ after FreeCAD launches Failed to load image file - Failed to load image file + Error al cargar el archivo de imagen Cannot load file %1: %2 - Cannot load file %1: %2 + No se puede cargar el archivo %1: %2 Fit to window - Fit to window + Ajustar a la ventana @@ -12644,13 +12644,13 @@ after FreeCAD launches Load image... - Load image... + Cargando imágen... Loads an image - Loads an image + Carga una imagen @@ -12658,32 +12658,32 @@ after FreeCAD launches FRONT - FRONT + ANTERIOR REAR - REAR + POSTERIOR TOP - TOP + SUPERIOR BOTTOM - BOTTOM + INFERIOR RIGHT - RIGHT + DERECHA LEFT - LEFT + IZQUIERDA @@ -12691,7 +12691,7 @@ after FreeCAD launches Enter desired distance between the points - Enter desired distance between the points + Introduzca la distancia deseada entre los puntos diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 00a383d10d..adbcbfd316 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Editar imagen @@ -1240,7 +1240,7 @@ Si esto no está marcado, entonces la propiedad debe ser nombrada de forma únic To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Para cambiar un atajo actual ingrese el nuevo atajo en el siguiente campo y pulse 'Asignar'. @@ -1999,12 +1999,12 @@ punto. Language and number format - Language and number format + Idioma y formato numérico Language: - Language: + Idioma: @@ -2014,7 +2014,7 @@ punto. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Sistema de unidades que debe ser utilizado para todas las partes de la aplicación @@ -2039,7 +2039,7 @@ punto. Substitute decimal separator - Substitute decimal separator + Sustituir separador decimal @@ -2084,7 +2084,7 @@ esto de acuerdo con el tamaño de la pantalla o el gusto personal Size of recent file list: - Size of recent file list: + Tamaño de la lista de archivos recientes: @@ -2854,7 +2854,7 @@ Especifique otro directorio, por favor. Restart required - Restart required + Es necesario reiniciar @@ -5083,24 +5083,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Gradiente lineal Radial gradient - Radial gradient + Gradiente radial Top: - Top: + Arriba: Middle: - Middle: + Medio: @@ -5126,7 +5126,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Abajo: @@ -5156,17 +5156,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Central: Midway: - Midway: + A medio camino: End: - End: + Fin: @@ -6206,7 +6206,7 @@ originally selected prior to opening this dialog Critical messages - Critical messages + Mensajes críticos @@ -8004,7 +8004,7 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Mostrar elementos ocultos en la vista de árbol @@ -8014,12 +8014,12 @@ Do you want to specify another directory? Toggle visibility in tree view - Toggle visibility in tree view + Cambiar visibilidad en la vista de árbol Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Cambia la visibilidad de los elementos seleccionados en la vista de árbol @@ -8656,7 +8656,7 @@ Desea continuar? Save image - Save image + Guardar imagen @@ -8773,18 +8773,18 @@ Desea continuar? Notifier - Notifier + Notificador Message - Message + Mensaje Notifier: - Notifier: + Notificador: @@ -8799,7 +8799,7 @@ Desea continuar? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Demasiadas notificaciones no intrusivas abiertas. ¡Se están omitiendo las notificaciones! @@ -9347,7 +9347,7 @@ la copia actual se perderá. Change image... - Change image... + Cambiar imagen... @@ -11731,7 +11731,7 @@ la copia actual se perderá. Save image... - Save image... + Guardar imagen... @@ -12034,7 +12034,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Clipboard - Clipboard + Portapapeles @@ -12151,7 +12151,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Notification Area - Notification Area + Área de notificaciones @@ -12161,12 +12161,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. The Notification area will appear in the status bar - The Notification area will appear in the status bar + El área de notificación aparecerá en la barra de estado Enable Notification Area - Enable Notification Area + Activar área de notificación @@ -12181,7 +12181,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Additional data Sources - Additional data Sources + Fuentes de datos adicionales @@ -12206,22 +12206,22 @@ Por favor, compruebe la Vista de Reportes para más detalles. Non-Intrusive Notifications - Non-Intrusive Notifications + Notificaciones no intrusivas Minimum Duration: - Minimum Duration: + Duración mínima: Maximum Duration: - Maximum Duration: + Duración máxima: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Duración durante la cual se mostrará la notificación (a menos que se haga clic en los botones del ratón) @@ -12232,62 +12232,62 @@ Por favor, compruebe la Vista de Reportes para más detalles. Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Duración mínima durante la cual se mostrará la notificación (a menos que se haga clic en la notificación) Maximum Number of Notifications: - Maximum Number of Notifications: + Número máximo de notificaciones: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Número máximo de notificaciones que estarán simultáneamente presentes en la pantalla Notification width: - Notification width: + Ancho de la notificación: Width of the notification in pixels - Width of the notification in pixels + Ancho de la notificación en píxeles Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Cualquier notificación no intrusiva desaparecerá cuando otra ventana esté activada Hide when other window is activated - Hide when other window is activated + Ocultar cuando otra ventana está activada Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Evita que aparezcan notificaciones no intrusivas cuando la ventana de FreeCAD no es la ventana activa Do not show when inactive - Do not show when inactive + No mostrar cuando esté inactivo Message List - Message List + Lista de mensajes Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Limita el número de mensajes que se mantendrán en la lista. Si es 0 no hay límite. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Máximo de mensajes (0 = sin límite): @@ -12297,7 +12297,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Auto-remove User Notifications - Auto-remove User Notifications + Auto-eliminar notificaciones de usuario @@ -12322,7 +12322,7 @@ Currently, your system has the following workbenches:</p></body>< Start up workbench: - Start up workbench: + Iniciar banco de trabajo: @@ -12370,7 +12370,7 @@ después de que FreeCAD inicie Planes - Planes + Planos @@ -12403,12 +12403,12 @@ después de que FreeCAD inicie Image plane settings - Image plane settings + Ajustes de plano de imagen Planes - Planes + Planos @@ -12438,27 +12438,27 @@ después de que FreeCAD inicie X distance: - X distance: + Distancia X: Y distance: - Y distance: + Distancia Y: Rotation : - Rotation : + Rotación: Transparency : - Transparency : + Transparencia: Image size - Image size + Tamaño de la imagen @@ -12473,12 +12473,12 @@ después de que FreeCAD inicie Keep aspect ratio - Keep aspect ratio + Mantener proporción Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Escala interactivamente la imagen ajustando la longitud dados dos puntos de la imagen. @@ -12488,7 +12488,7 @@ después de que FreeCAD inicie Calibration - Calibration + Calibración @@ -12506,7 +12506,7 @@ después de que FreeCAD inicie Color Gradient - Color Gradient + Gradiente de color @@ -12514,7 +12514,7 @@ después de que FreeCAD inicie If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Si no se selecciona, %1 no aparecerá en los bancos de trabajo disponibles. @@ -12524,17 +12524,17 @@ después de que FreeCAD inicie Shortcut to activate this workbench. - Shortcut to activate this workbench. + Atajo para activar este banco de trabajo. Auto-load - Auto-load + Carga automática If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Si está marcado, %1 se cargará automáticamente cuando FreeCAD se inicie @@ -12554,7 +12554,7 @@ después de que FreeCAD inicie To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Para preservar recursos, FreeCAD no carga los bancos de trabajo hasta que se usen. Cargarlos puede proporcionar acceso a preferencias adicionales relacionadas con su funcionalidad. @@ -12580,7 +12580,7 @@ después de que FreeCAD inicie Color Legend - Color Legend + Leyenda de color @@ -12593,12 +12593,12 @@ después de que FreeCAD inicie Delete user notifications - Delete user notifications + Eliminar notificaciones de usuario Delete All - Delete All + Borrar todo @@ -12606,12 +12606,12 @@ después de que FreeCAD inicie Delete user notifications - Delete user notifications + Eliminar notificaciones de usuario Delete All - Delete All + Borrar todo @@ -12619,17 +12619,17 @@ después de que FreeCAD inicie Failed to load image file - Failed to load image file + Error al cargar el archivo de imagen Cannot load file %1: %2 - Cannot load file %1: %2 + No se puede cargar el archivo %1: %2 Fit to window - Fit to window + Ajustar a la ventana @@ -12647,13 +12647,13 @@ después de que FreeCAD inicie Load image... - Load image... + Cargar imagen... Loads an image - Loads an image + Carga una imagen @@ -12661,17 +12661,17 @@ después de que FreeCAD inicie FRONT - FRONT + FRONTAL REAR - REAR + ATRAS TOP - TOP + ARRIBA @@ -12681,12 +12681,12 @@ después de que FreeCAD inicie RIGHT - RIGHT + DERECHA LEFT - LEFT + IZQUIERDA diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index de0017808e..818efc2109 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Editatu irudia @@ -1239,7 +1239,7 @@ Hau markatuta ez badago, propietateak izen bakarra izan behar du eta 'obj.Izena' To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Uneko lasterbidea aldatzeko, sartu lasterbide berria beheko eremua eta sakatu 'Esleitu'. @@ -1997,12 +1997,12 @@ horietan beti puntu bat inprimatuko baita. Language and number format - Language and number format + Hizkuntza eta zenbaki-formatua Language: - Language: + Hizkuntza: @@ -2012,7 +2012,7 @@ horietan beti puntu bat inprimatuko baita. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Aplikazioko pieza guztietarako erabiliko den unitate-sistema @@ -2037,7 +2037,7 @@ horietan beti puntu bat inprimatuko baita. Substitute decimal separator - Substitute decimal separator + Ordeztu dezimalen bereizlea @@ -2082,14 +2082,14 @@ Zure pantaila-tamainaren edo gustu pertsonalen arabera doitu daiteke. Size of recent file list: - Size of recent file list: + Azken fitxategien zerrendaren luzera: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Leiho nagusiaren atzeko planoa (dokumenturik irekita ez dagoenean) irudi berezi baten lauzak izango dira. +Ikusi FreeCADen wikia irudiari buruzko xehetasunak ezagutzeko. @@ -2851,7 +2851,7 @@ Zehaztu beste direktorio, mesedez. Restart required - Restart required + Berrabiarazi egin behar da @@ -3027,12 +3027,12 @@ Zehaztu beste direktorio, mesedez. Failed to extract project - Failed to extract project + Huts egin du proiektua erauzteak Failed to create project - Failed to create project + Huts egin du proiektua sortzeak @@ -5000,8 +5000,8 @@ espazioa baino gehiago behar dutenean Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + 3D bistako elementuak aukeratzeko area. +Balio handiagoak elementuak aukeratzea errazten du, baina elementu txikiak hautatzea oztopatu dezake. @@ -5092,24 +5092,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Gradiente lineala Radial gradient - Radial gradient + Gradiente erradiala Top: - Top: + Goikoa: Middle: - Middle: + Erdikoa: @@ -5135,7 +5135,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Behekoa: @@ -5165,17 +5165,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Zentrala: Midway: - Midway: + Erdibidekoa: End: - End: + Amaierakoa: @@ -6217,7 +6217,7 @@ hautatutako objektuekin Critical messages - Critical messages + Mezu kritikoak @@ -8018,22 +8018,22 @@ Beste direktorio bat aukeratu nahi al duzu? Show items hidden in tree view - Show items hidden in tree view + Erakutsi Zuhaitz-bistako elementuak Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Erakutsi zuhaitz-bistan "ezkutuan" markatuta dauden elementuak Toggle visibility in tree view - Toggle visibility in tree view + Aldatu ikuspena zuhaitz-bistan Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Aukeratutako elementuen ikuspena zuhaitz-bistan aldatzen du @@ -8672,7 +8672,7 @@ Jarraitu nahi duzu? Save image - Save image + Gorde irudia @@ -8789,18 +8789,18 @@ Jarraitu nahi duzu? Notifier - Notifier + Jakinarazlea Message - Message + Mezua Notifier: - Notifier: + Jakinarazlea: @@ -8815,7 +8815,7 @@ Jarraitu nahi duzu? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Jakinarazpen ez intrusibo gehiegi dago irekita. Jakinarazpenei ez ikusiarena egiten ari zaie. @@ -9362,7 +9362,7 @@ egindako aldaketak galdu egingo direla. Change image... - Change image... + Aldatu irudia... @@ -11746,7 +11746,7 @@ egindako aldaketak galdu egingo direla. Save image... - Save image... + Gorde irudia... @@ -12049,7 +12049,7 @@ Jarraitu nahi al duzu? Clipboard - Clipboard + Arbela @@ -12166,7 +12166,7 @@ Jarraitu nahi al duzu? Notification Area - Notification Area + Jakinarazpen-area @@ -12176,32 +12176,32 @@ Jarraitu nahi al duzu? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Jakinarazpen-area egoera-barran agertuko da Enable Notification Area - Enable Notification Area + Gaitu jakinarazpen-area Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Jakinarazpen ez intrusiboak egoera-barrako jakinarazpen-arearen alboan agertuko dira Enable non-intrusive notifications - Enable non-intrusive notifications + Gaitu jakinarazpen ez intrusiboak Additional data Sources - Additional data Sources + Datu-iturburu gehigarriak Errors will appear in the notification area - Errors will appear in the notification area + Erroreak jakinarazpen-arean agertuko dira @@ -12211,7 +12211,7 @@ Jarraitu nahi al duzu? Warnings will appear in the notification area - Warnings will appear in the notification area + Abvisuak jakinarazpen-arean agertuko dira @@ -12221,22 +12221,22 @@ Jarraitu nahi al duzu? Non-Intrusive Notifications - Non-Intrusive Notifications + Jakinarazpen ez intrusiboak Minimum Duration: - Minimum Duration: + Iraupen minimoa: Maximum Duration: - Maximum Duration: + Iraupen maximoa: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Jakinarazpenak zenbat denbora erakutsiko diren (saguaren botoietan klik egiten bada salbu) @@ -12247,37 +12247,37 @@ Jarraitu nahi al duzu? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Jakinarazpena gutxienez zenbat denbora erakutsiko den (jakinarazpenean klik egiten bada salbu) Maximum Number of Notifications: - Maximum Number of Notifications: + Jakinarazpen kopuru maximoa: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Pantailan aldi berean agertuko den jakinarazpen kopuru maximoa Notification width: - Notification width: + Jakinarazpenaren zabalera: Width of the notification in pixels - Width of the notification in pixels + Jakinarazpenaren zabalera pixeletan Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Irekita dauden jakinarazpen ez intrusiboak desagertu egingo dira beste leiho bat aktibatzen denean Hide when other window is activated - Hide when other window is activated + Ezkutatu beste leihoa aktibatzen denean @@ -12287,12 +12287,12 @@ Jarraitu nahi al duzu? Do not show when inactive - Do not show when inactive + Inaktibo dagoenean ez erakutsi Message List - Message List + Mezuen zerrenda @@ -12302,7 +12302,7 @@ Jarraitu nahi al duzu? Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Mezu maximoak (0 = ez du mugarik): @@ -12312,12 +12312,12 @@ Jarraitu nahi al duzu? Auto-remove User Notifications - Auto-remove User Notifications + Automatikoki kendu erabiltzaile-jakinarazpenak Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Jakinarazpen-area aplikazioa berrabiarazi ondoren soilik aktibatuko da. @@ -12331,13 +12331,13 @@ Jarraitu nahi al duzu? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Lan-mahaiak arrastatu eta jaregin daitezke haiek ordenatzeko. Lan-mahai gehiago instalatzeko, erabili gehigarrien kudeatzailea.</p><p> +Une honetan, zure sistemak honako lan-mahaiak ditu:</p></body></html> Start up workbench: - Start up workbench: + Lan-mahaia abiarazi: @@ -12385,7 +12385,7 @@ FreeCAD abiarazi ondoren Planes - Planes + Planoak @@ -12418,12 +12418,12 @@ FreeCAD abiarazi ondoren Image plane settings - Image plane settings + Irudi-planoaren ezarpenak Planes - Planes + Planoak @@ -12453,27 +12453,27 @@ FreeCAD abiarazi ondoren X distance: - X distance: + X distantzia: Y distance: - Y distance: + Y distantzia: Rotation : - Rotation : + Rotazioa: Transparency : - Transparency : + Gardentasuna: Image size - Image size + Irudiaren tamaina @@ -12488,12 +12488,12 @@ FreeCAD abiarazi ondoren Keep aspect ratio - Keep aspect ratio + Itxura-erlazioa mantendu Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Eskalatu irudia modu interaktiboan, irudiaren bi punturen arteko luzera ezarriz. @@ -12503,7 +12503,7 @@ FreeCAD abiarazi ondoren Calibration - Calibration + Kalibrazioa @@ -12521,7 +12521,7 @@ FreeCAD abiarazi ondoren Color Gradient - Color Gradient + Kolore-gradientea @@ -12529,27 +12529,27 @@ FreeCAD abiarazi ondoren If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Ez badago markatuta, %1 ez da agertuko lan-mahai erabilgarrien artean. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Uneko abioko modulua da hau, eta gaitu egin behar da. Ikusi 'Hobespenak - Orokorra - Automatikoki kargatu' hura aldatzeko. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Lan-mahai hau aktibatzeko lasterbidea. Auto-load - Auto-load + Karga-automatikoa If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Markatua badago, %1 FreeCAD abiarazten denean automatikoki kargatuko da @@ -12569,7 +12569,7 @@ FreeCAD abiarazi ondoren To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Baliabideak aurrezteko, FreeCADek ez ditu laneko mahaiak kargatzen haiek erabili nahi diren arte. Kargatzen direnean, haien funtzionaltasunari lotutako hobespen gehigarriak agertuko dira. @@ -12595,7 +12595,7 @@ FreeCAD abiarazi ondoren Color Legend - Color Legend + Kolore-legenda @@ -12608,12 +12608,12 @@ FreeCAD abiarazi ondoren Delete user notifications - Delete user notifications + Ezabatu erabiltzailearen jakinarazpenak Delete All - Delete All + Ezabatu dena @@ -12621,12 +12621,12 @@ FreeCAD abiarazi ondoren Delete user notifications - Delete user notifications + Ezabatu erabiltzailearen jakinarazpenak Delete All - Delete All + Ezabatu dena @@ -12634,17 +12634,17 @@ FreeCAD abiarazi ondoren Failed to load image file - Failed to load image file + Irudiaren fitxategiaren kargak huts egin du Cannot load file %1: %2 - Cannot load file %1: %2 + %1: %2 fitxategia ezin da kargatu Fit to window - Fit to window + Doitu leihoari @@ -12662,13 +12662,13 @@ FreeCAD abiarazi ondoren Load image... - Load image... + Irudia kargatu... Loads an image - Loads an image + Irudi bat kargatzen du @@ -12676,32 +12676,32 @@ FreeCAD abiarazi ondoren FRONT - FRONT + AURRETIK REAR - REAR + ATZETIK TOP - TOP + GOITIK BOTTOM - BOTTOM + BEHETIK RIGHT - RIGHT + ESKUBITIK LEFT - LEFT + EZKERRETIK @@ -12709,7 +12709,7 @@ FreeCAD abiarazi ondoren Enter desired distance between the points - Enter desired distance between the points + Sartu puntuen arteko distantzia diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index eac042158a..d7b6d45920 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Modifier image @@ -1239,7 +1239,7 @@ Si ce n'est pas coché, alors la propriété doit être nommée de manière uniq To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Pour modifier un raccourci en cours, entrez le nouveau raccourci dans le champ ci-dessous et appuyez sur "Affecter". @@ -1998,12 +1998,12 @@ point sera toujours affiché. Language and number format - Language and number format + Format de la langue et des nombres Language: - Language: + Langue : @@ -2013,7 +2013,7 @@ point sera toujours affiché. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Système d'unités à utiliser pour toutes les pièces de l'application @@ -2038,7 +2038,7 @@ point sera toujours affiché. Substitute decimal separator - Substitute decimal separator + Remplacer le séparateur décimal @@ -2083,14 +2083,14 @@ selon la taille de votre écran ou votre goût personnel Size of recent file list: - Size of recent file list: + Taille de la liste des fichiers récents : Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + L'arrière-plan de la fenêtre principale (quand aucun document n'est ouvert) sera constitué de tuiles d'une image spéciale. +Voir le Wiki FreeCAD pour plus de détails sur l'image. @@ -2433,7 +2433,8 @@ Remarque : vos modifications seront appliquées lorsque vous changerez d'atelier Failed to rename to '%1'. Perhaps a file permission error? - Impossible de renommer en '%1'. Peut-être une erreur de permission des fichiers ? + Impossible de renommer en "%1". +Peut-être une erreur de permission des fichiers ? @@ -2449,7 +2450,7 @@ Perhaps a file permission error? Failed to duplicate to '%1'. Perhaps a file permission error? - Impossible de dupliquer '%1'. + Impossible de dupliquer "%1". Peut-être une erreur de permission du fichier ? @@ -2850,7 +2851,7 @@ Veuillez spécifier un autre répertoire. Restart required - Restart required + Redémarrage requis @@ -3026,12 +3027,12 @@ Veuillez spécifier un autre répertoire. Failed to extract project - Failed to extract project + Impossible d'extraire le projet Failed to create project - Failed to create project + Échec de la création du projet @@ -3254,7 +3255,7 @@ depuis la console Python vers la fenêtre Rapport Internal Python error messages will be redirected from Python console to Report view panel Les messages d'erreur internes de Python seront redirigés -de la console Python vers la vue rapport +de la console Python vers la Vue rapport @@ -3534,7 +3535,7 @@ Il y a 3 options disponibles pour y parvenir : Size of vertices in the Sketcher workbench - Taille des sommets dans l'atelier Esquisse + Taille des sommets dans l'atelier Sketcher @@ -3547,8 +3548,8 @@ Il y a 3 options disponibles pour y parvenir : The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. Ecart pupillaire utilisée pour les projections stéréo. -La valeur spécifiée est un facteur qui sera multiplié avec la -taille de la boîte englobante de l'objet 3D qui est actuellement affichée. +La valeur spécifiée est un facteur qui sera multiplié avec +la taille de la boîte englobante de l'objet 3D affichée. @@ -4705,7 +4706,7 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Button color - Couleur du bouton + Couleur des boutons @@ -4986,8 +4987,8 @@ dans la console Python Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Zone de sélection des éléments dans la vue 3D. +Une valeur plus grande facilite la sélection, mais peut rendre les petites fonctions difficiles, voire impossible à sélectionner. @@ -5078,24 +5079,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Dégradé linéaire Radial gradient - Radial gradient + Dégradé radial Top: - Top: + En haut : Middle: - Middle: + Milieu : @@ -5121,7 +5122,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + En bas : @@ -5151,17 +5152,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Au centre : Midway: - Midway: + Au milieu : End: - End: + Au bord : @@ -6202,7 +6203,7 @@ initialement sélectionnés avant d'ouvrir ce dialogue Critical messages - Critical messages + Messages critiques @@ -6407,7 +6408,7 @@ Voulez enregistrer les modifications ? FreeCAD macro - Macro FreeCAD + Macro de FreeCAD @@ -6772,12 +6773,12 @@ Voulez enregistrer les modifications ? Macro file doesn't exist - Le fichier macro n'existe pas + Le fichier de la macro n'existe pas No such macro file: '%1' - Fichier macro inexistant: «%1 » + Fichier de la macro inexistant : "%1" @@ -7998,22 +7999,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Afficher les éléments masqués dans l'arborescence Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Afficher les éléments qui sont marqués comme "cachés" dans la vue arborescence Toggle visibility in tree view - Toggle visibility in tree view + Activer/désactiver la visibilité dans l'arborescence Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Active/désactive la visibilité des éléments sélectionnés dans l'arborescence @@ -8650,7 +8651,7 @@ Do you want to continue? Save image - Save image + Enregistrer l'image @@ -8767,18 +8768,18 @@ Do you want to continue? Notifier - Notifier + Notificateur Message - Message + Message Notifier: - Notifier: + Notificateur : @@ -8793,7 +8794,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Trop de notifications non intrusives ouvertes. Des notifications sont omises ! @@ -9112,7 +9113,7 @@ Veuillez ouvrir une fenêtre de navigateur et saisir : http://localhost:%1. Not allowed to delete system-wide macros - Pas autorisé à supprimer les macros du système + Pas autorisé à supprimer les macros de l'ensemble du système @@ -9339,7 +9340,7 @@ Notez que toute modification apportée à la copie en cours sera perdue. Change image... - Change image... + Modifier l'image... @@ -10112,7 +10113,7 @@ Notez que toute modification apportée à la copie en cours sera perdue. Attach to a remotely running debugger - Attaché à un débogueur distant en cours d'exécution + Se connecter au débogueur distant en cours d'exécution @@ -11723,7 +11724,7 @@ Notez que toute modification apportée à la copie en cours sera perdue. Save image... - Save image... + Enregistrer l'image... @@ -12026,7 +12027,7 @@ Voulez-vous tout de même continuer ? Clipboard - Clipboard + Presse-papiers @@ -12143,7 +12144,7 @@ Voulez-vous tout de même continuer ? Notification Area - Notification Area + Zone de notification @@ -12153,32 +12154,32 @@ Voulez-vous tout de même continuer ? The Notification area will appear in the status bar - The Notification area will appear in the status bar + La zone de notification apparaîtra dans la barre d'état Enable Notification Area - Enable Notification Area + Activer la zone de notification Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Des notifications non intrusives apparaîtront à côté de la zone de notification dans la barre d'état Enable non-intrusive notifications - Enable non-intrusive notifications + Activer les notifications non intrusives Additional data Sources - Additional data Sources + Sources supplémentaires de données Errors will appear in the notification area - Errors will appear in the notification area + Les erreurs apparaîtront dans la zone de notification @@ -12188,7 +12189,7 @@ Voulez-vous tout de même continuer ? Warnings will appear in the notification area - Warnings will appear in the notification area + Les avertissements apparaîtront dans la zone de notification @@ -12198,22 +12199,22 @@ Voulez-vous tout de même continuer ? Non-Intrusive Notifications - Non-Intrusive Notifications + Notifications non intrusives Minimum Duration: - Minimum Duration: + Durée minimale : Maximum Duration: - Maximum Duration: + Durée maximale : Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Durée pendant laquelle la notification sera affichée (sauf si les boutons de la souris sont cliqués) @@ -12224,77 +12225,77 @@ Voulez-vous tout de même continuer ? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Durée minimale pendant laquelle la notification sera affichée (sauf si la notification est cliquée) Maximum Number of Notifications: - Maximum Number of Notifications: + Nombre maximum de notifications : Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Nombre maximum de notifications qui seront présentes simultanément à l'écran Notification width: - Notification width: + Largeur de la notification : Width of the notification in pixels - Width of the notification in pixels + Largeur de la notification en pixels Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Toutes les notifications non intrusives ouvertes disparaîtront quand une autre fenêtre sera activée Hide when other window is activated - Hide when other window is activated + Masquer quand une autre fenêtre est activée Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Empêcher l'apparition de notifications non intrusives lorsque la fenêtre FreeCAD n'est pas la fenêtre active Do not show when inactive - Do not show when inactive + Ne pas afficher en cas d'inactivité Message List - Message List + Liste de messages Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Limite le nombre de messages qui seront conservés dans la liste. Si 0 il n'y a pas de limite. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Nombre maximum de messages (0 = sans limite) : Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Supprime les notifications de l'utilisateur de la liste des messages après l'expiration de la durée maximale non intrusive. Auto-remove User Notifications - Auto-remove User Notifications + Suppression automatique des notifications de l'utilisateur Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + L'activation de la zone de notification ne prend effet qu'après le redémarrage de l'application. @@ -12308,13 +12309,13 @@ Voulez-vous tout de même continuer ? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Vous pouvez réorganiser les ateliers par un glisser-déposer. Des ateliers supplémentaires peuvent être installés via le gestionnaire d'extension.</p><p> +Actuellement, votre système dispose des ateliers suivants :</p></body></html> Start up workbench: - Start up workbench: + Démarrage de l'atelier : @@ -12362,7 +12363,7 @@ après le lancement de FreeCAD Planes - Planes + Plans @@ -12395,12 +12396,12 @@ après le lancement de FreeCAD Image plane settings - Image plane settings + Paramètres du plan de l'image Planes - Planes + Plans @@ -12430,27 +12431,27 @@ après le lancement de FreeCAD X distance: - X distance: + Distance X : Y distance: - Y distance: + Distance Y : Rotation : - Rotation : + Rotation  : Transparency : - Transparency : + Transparence : Image size - Image size + Dimension de l'image @@ -12465,12 +12466,12 @@ après le lancement de FreeCAD Keep aspect ratio - Keep aspect ratio + Conserver les proportions Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Mise à l'échelle interactive de l'image en définissant une longueur entre deux points de l'image. @@ -12480,7 +12481,7 @@ après le lancement de FreeCAD Calibration - Calibration + Calibration @@ -12498,7 +12499,7 @@ après le lancement de FreeCAD Color Gradient - Color Gradient + Dégradé de couleur @@ -12506,27 +12507,27 @@ après le lancement de FreeCAD If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Si non coché, %1 n'apparaîtra pas dans les ateliers disponibles. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Ceci est le module de démarrage actuel et doit être activé. Voir Préférences/Générales/Autoload pour en changer. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Raccourci pour activer cet atelier. Auto-load - Auto-load + Chargement automatique If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Si coché, %1 sera chargé automatiquement lorsque FreeCAD démarrera @@ -12546,7 +12547,7 @@ après le lancement de FreeCAD To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Pour préserver les ressources, FreeCAD ne charge pas les ateliers tant qu'ils ne sont pas utilisés. Les charger peut fournir un accès à des préférences supplémentaires liées à leurs fonctionnalités. @@ -12572,7 +12573,7 @@ après le lancement de FreeCAD Color Legend - Color Legend + Légende des couleurs @@ -12585,12 +12586,12 @@ après le lancement de FreeCAD Delete user notifications - Delete user notifications + Supprimer les notifications de l'utilisateur Delete All - Delete All + Tout supprimer @@ -12598,12 +12599,12 @@ après le lancement de FreeCAD Delete user notifications - Delete user notifications + Supprimer les notifications de l'utilisateur Delete All - Delete All + Tout supprimer @@ -12611,17 +12612,17 @@ après le lancement de FreeCAD Failed to load image file - Failed to load image file + Échec du chargement du fichier image Cannot load file %1: %2 - Cannot load file %1: %2 + Impossible de charger le fichier %1 : %2 Fit to window - Fit to window + Ajuster à la fenêtre @@ -12639,13 +12640,13 @@ après le lancement de FreeCAD Load image... - Load image... + Chargement de l'image... Loads an image - Loads an image + Charge une image @@ -12653,32 +12654,32 @@ après le lancement de FreeCAD FRONT - FRONT + AVANT REAR - REAR + ARRIÈRE TOP - TOP + HAUT BOTTOM - BOTTOM + BAS RIGHT - RIGHT + DROITE LEFT - LEFT + GAUCHE @@ -12686,7 +12687,7 @@ après le lancement de FreeCAD Enter desired distance between the points - Enter desired distance between the points + Entrez la distance souhaitée entre les points diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 3ca281d6d6..44e8f44639 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Kép szerkesztése @@ -1239,7 +1239,7 @@ Ha ez nincs bejelölve, akkor a tulajdonságot egyedileg kell elnevezni, és úg To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + A jelenlegi parancsikon megváltoztatásához írja be az új parancsikon nevét az alábbi mezőbe, majd nyomja meg a 'Hozzárendelés' gombot. @@ -1998,12 +1998,12 @@ pont/pont mindig ki lesz nyomtatva. Language and number format - Language and number format + Nyelv és számformátum Language: - Language: + Nyelv: @@ -2013,7 +2013,7 @@ pont/pont mindig ki lesz nyomtatva. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Az alkalmazás minden részéhez használandó egységrendszer @@ -2038,7 +2038,7 @@ pont/pont mindig ki lesz nyomtatva. Substitute decimal separator - Substitute decimal separator + Helyettesítő tizedeselválasztó @@ -2082,14 +2082,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + Legutóbbi fájlok listájának mérete: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + A főablak háttere (ha nincs megnyitva dokumentum) egy speciális kép csempéiből áll. +A képpel kapcsolatos részletekért lásd a FreeCAD Wiki-t. @@ -2850,7 +2850,7 @@ Kérem válasszon másik könyvtárat. Restart required - Restart required + Újraindítás szükséges @@ -3026,12 +3026,12 @@ Kérem válasszon másik könyvtárat. Failed to extract project - Failed to extract project + Nem sikerült exportálni a projektet Failed to create project - Failed to create project + Nem sikerült létrehozni a projektet @@ -4994,9 +4994,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - + Terület az elemek kiválasztásához a 3D nézetben. +Nagyobb érték megkönnyíti a kiválasztást, de lehetetlenné teheti a kis elemek kiválasztását. @@ -5086,24 +5085,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Lineáris átmenet Radial gradient - Radial gradient + Sugárirányú átmenet Top: - Top: + Felső: Middle: - Middle: + Középső: @@ -5129,7 +5128,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Alsó: @@ -5159,17 +5158,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Központ: Midway: - Midway: + Közepén: End: - End: + Vége: @@ -6210,7 +6209,7 @@ párbeszédpanel megnyitása előtt kiválasztott tárgyak folytatása Critical messages - Critical messages + Kritikus értesítések @@ -8011,22 +8010,22 @@ Meg szeretne adni egy másik könyvtárat? Show items hidden in tree view - Show items hidden in tree view + Fa nézetben elrejtett elemek megjelenítése Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Fa nézetben a "rejtett"-ként jelölt elemek megjelenítése Toggle visibility in tree view - Toggle visibility in tree view + Láthatóság váltása a fa nézetben Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Fa nézetben a kiválasztott elemek láthatóságának váltása @@ -8665,7 +8664,7 @@ Folytatni kívánja? Save image - Save image + Kép mentése @@ -8782,18 +8781,18 @@ Folytatni kívánja? Notifier - Notifier + Értesítő Message - Message + Üzenet Notifier: - Notifier: + Értesítő: @@ -8808,7 +8807,7 @@ Folytatni kívánja? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Túl sok megnyitott nem zavaró értesítés. Az értesítések elmaradnak! @@ -9356,7 +9355,7 @@ az aktuális példány elveszik. Change image... - Change image... + Kép módosítása... @@ -11740,7 +11739,7 @@ az aktuális példány elveszik. Save image... - Save image... + Kép mentése... @@ -12043,7 +12042,7 @@ Még mindig fojtatni szeretné? Clipboard - Clipboard + Vágólap @@ -12160,7 +12159,7 @@ Még mindig fojtatni szeretné? Notification Area - Notification Area + Értesítési terület @@ -12170,32 +12169,32 @@ Még mindig fojtatni szeretné? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Az értesítési terület megjelenik az állapotsorban Enable Notification Area - Enable Notification Area + Értesítési terület engedélyezése Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + A nem zavaró értesítések az értesítési terület mellett jelennek meg az állapotsorban Enable non-intrusive notifications - Enable non-intrusive notifications + Nem zavaró értesítések engedélyezése Additional data Sources - Additional data Sources + További adatforrások Errors will appear in the notification area - Errors will appear in the notification area + A hibák az értesítési területen jelennek meg @@ -12205,7 +12204,7 @@ Még mindig fojtatni szeretné? Warnings will appear in the notification area - Warnings will appear in the notification area + A figyelmeztetések az értesítési területen jelennek meg @@ -12215,22 +12214,22 @@ Még mindig fojtatni szeretné? Non-Intrusive Notifications - Non-Intrusive Notifications + Nem zavaró értesítések Minimum Duration: - Minimum Duration: + Minimális időtartam: Maximum Duration: - Maximum Duration: + Maximális időtartam: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Az értesítés megjelenésének időtartama (kivéve, ha az egérgombokra kattintanak) @@ -12241,77 +12240,77 @@ Még mindig fojtatni szeretné? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Az értesítés megjelenésének minimális időtartama (kivéve, ha az értesítésre kattintottak) Maximum Number of Notifications: - Maximum Number of Notifications: + Értesítések maximális száma: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + A képernyőn egyidejűleg megjelenő értesítések maximális száma Notification width: - Notification width: + Értesítési szélessége: Width of the notification in pixels - Width of the notification in pixels + Az értesítés szélessége pixelben Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Minden nyitott, nem zavaró értesítés eltűnik, amikor egy másik ablak aktiválódik Hide when other window is activated - Hide when other window is activated + Más ablak aktiválásakor elrejteni Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Megakadályozza a nem zavaró értesítések megjelenését, amikor a FreeCAD ablak nem az aktív ablak Do not show when inactive - Do not show when inactive + Ne jelenjen meg, ha inaktív Message List - Message List + Üzenetlista Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Korlátozza a listában tárolt üzenetek számát. Ha 0, akkor nincs korlátozás. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maximális üzenetek (0 = nincs korlát): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Eltávolítja a felhasználói értesítéseket az üzenetlistából, miután a nem tolakodó maximális időtartam lejárt. Auto-remove User Notifications - Auto-remove User Notifications + Felhasználói értesítések automatikus eltávolítása Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Az értesítési terület aktiválása csak az alkalmazás újraindítása után lép hatályba. @@ -12325,13 +12324,13 @@ Még mindig fojtatni szeretné? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>A munkafelület átrendezése húz és visz segítségével történhet. További munkafelületek telepíthetők a bővítménykezelőn keresztül.</p><p> +Jelenleg a rendszere a következő munkafelületekkel rendelkezik:</p></body></html> Start up workbench: - Start up workbench: + Munkafelület indítása: @@ -12379,7 +12378,7 @@ a FreeCAD elindítása után Planes - Planes + Síkok @@ -12412,12 +12411,12 @@ a FreeCAD elindítása után Image plane settings - Image plane settings + Kép sík beállításai Planes - Planes + Síkok @@ -12447,27 +12446,27 @@ a FreeCAD elindítása után X distance: - X distance: + X távolság: Y distance: - Y distance: + Y távolság: Rotation : - Rotation : + Elforgatás : Transparency : - Transparency : + Áttetszőség : Image size - Image size + Képméret @@ -12482,12 +12481,12 @@ a FreeCAD elindítása után Keep aspect ratio - Keep aspect ratio + Méretarány megtartása Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Interaktívan méretezheti a képet a kép két pontja közötti hossz beállításával. @@ -12497,7 +12496,7 @@ a FreeCAD elindítása után Calibration - Calibration + Kalibrálás @@ -12515,7 +12514,7 @@ a FreeCAD elindítása után Color Gradient - Color Gradient + Színátmenet @@ -12523,27 +12522,27 @@ a FreeCAD elindítása után If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Ha a jelölőnégyzet nincs bejelölve, a %1 nem jelenik meg a rendelkezésre álló munkafelületek között. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Ez az aktuális indítómodul, és engedélyezni kell. A módosításhoz lásd a Beállítások/Általános/Autobetöltés menüpontot. Shortcut to activate this workbench. - Shortcut to activate this workbench. + A munkafelület aktiválásának gyorsbillentyűje. Auto-load - Auto-load + Auto betöltés If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Ha bejelölt, akkor a %1 automatikusan betöltődik a FreeCAD indulásakor @@ -12563,7 +12562,7 @@ a FreeCAD elindítása után To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Az erőforrások kímélése érdekében a FreeCAD nem tölti be a munkafelületeket, amíg azokat nem használják. Betöltésükkel a funkcionalitásukkal kapcsolatos további beállításokhoz férhet hozzá. @@ -12589,7 +12588,7 @@ a FreeCAD elindítása után Color Legend - Color Legend + Színskála @@ -12602,12 +12601,12 @@ a FreeCAD elindítása után Delete user notifications - Delete user notifications + Felhasználói értesítések törlése Delete All - Delete All + Összes törlése @@ -12615,12 +12614,12 @@ a FreeCAD elindítása után Delete user notifications - Delete user notifications + Felhasználói értesítések törlése Delete All - Delete All + Összes törlése @@ -12628,17 +12627,17 @@ a FreeCAD elindítása után Failed to load image file - Failed to load image file + Nem sikerült betölteni a kép fájlt Cannot load file %1: %2 - Cannot load file %1: %2 + Nem tudja betölteni a fájlt %1: %2 Fit to window - Fit to window + Ablakhoz igazít @@ -12656,13 +12655,13 @@ a FreeCAD elindítása után Load image... - Load image... + Kép betöltés... Loads an image - Loads an image + Egy képet tölt @@ -12670,32 +12669,32 @@ a FreeCAD elindítása után FRONT - FRONT + ELÜLSŐ REAR - REAR + HÁTSÓ TOP - TOP + FELSŐ BOTTOM - BOTTOM + ALSÓ RIGHT - RIGHT + JOBB LEFT - LEFT + BAL @@ -12703,7 +12702,7 @@ a FreeCAD elindítása után Enter desired distance between the points - Enter desired distance between the points + Adja meg a pontok közötti kívánt távolságot diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index eb3e26b9d3..bc3feb9838 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -47,24 +47,24 @@ <empty> - - + + Angle Sudut - - + + Axis Axis - + Position Position - + Enum Enum @@ -87,8 +87,8 @@ CmdViewMeasureClearAll - - + + Clear measurement Jelas pengukuran @@ -96,8 +96,8 @@ CmdViewMeasureToggleAll - - + + Toggle measurement Toggle pengukuran @@ -110,17 +110,17 @@ Edit - + Import Impor - + Delete Menghapus - + Paste expressions Paste expressions @@ -150,12 +150,12 @@ Impor semua tautan - + Insert measurement Sisipkan pengukuran - + Insert text document Sisipkan teks dokumen @@ -170,7 +170,7 @@ Add a group - + Align Align @@ -182,8 +182,8 @@ - + Transform Transform @@ -203,15 +203,21 @@ Ukur jarak - + Toggle visibility Toggle visibility - + Toggle selectability Toggle selectability + + + + Edit image + Edit image + CommandGroup @@ -403,22 +409,22 @@ EditMode - + Default Bawaan - + Transform Transform - + Cutting Pemotongan - + Color Warna @@ -439,7 +445,7 @@ Gui::AccelLineEdit - + none tidak ada @@ -485,12 +491,12 @@ Gui::AlignmentView - + Movable object Benda bergerak - + Fixed object Objek tetap @@ -498,22 +504,22 @@ Gui::Assistant - - - - + + + + %1 Help % 1 Bantuan - + %1 help files not found (%2). You might need to install the %1 documentation package. %1 file bantuan tidak ditemukan (%2). Anda mungkin perlu menginstal paket dokumentasi %1. - - - + + + Unable to launch Qt Assistant (%1) Tidak dapat meluncurkan Qt Assistant (%1) @@ -590,7 +596,7 @@ while doing a left or right click and move the mouse up or down Gui::ControlSingleton - + Task panel Panel tugas @@ -674,47 +680,47 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::AboutDialog - - + + Credits Header for the Credits tab of the About screen Kredit - + FreeCAD would not be possible without the contributions of FreeCAD would not be possible without the contributions of - + Individuals Header for the list of individual people in the Credits list. Individuals - + Organizations Header for the list of companies/organizations in the Credits list. Organisasi - - + + License Lisensi - + Libraries Pustaka - + This software uses open source components whose copyright and other proprietary rights belong to their respective owners: This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - + Collection Collection @@ -758,37 +764,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Setelan kamera - + Orientation Orientasi - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Current view @@ -854,7 +860,7 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CommandModel - + Commands Perintah @@ -903,7 +909,7 @@ while doing a left or right click and move the mouse up or down - + Play Bermain @@ -913,7 +919,7 @@ while doing a left or right click and move the mouse up or down Dekat - + Stop Berhenti @@ -1155,89 +1161,65 @@ If this is not ticked, then the property must be uniquely named, and it is acces Gui::Dialog::DlgCustomActionsImp - + Icons Icons - + Macros Makro - + Macro not found Makro tidak ditemukan - + Sorry, couldn't find macro file '%1'. Maaf, tidak dapat menemukan file makro ' %1 '. - + Empty macro Makro kosong - + Please specify the macro first. Harap tentukan dulu makronya. - - + + Empty text Empty text - - + + Please specify the menu text first. Silahkan tentukan teks menu terlebih dahulu. - + No item selected Tidak ada item dipilih - + Please select a macro item first. Silakan pilih item makro yang pertama. Gui::Dialog::DlgCustomCommands - - - Commands - Perintah - - - Gui::Dialog::DlgCustomCommandsImp - - - - Category - Kategori - - - - Icon - Ikon - - - - Command - Perintah - - Gui::Dialog::DlgCustomKeyboard @@ -1256,17 +1238,22 @@ If this is not ticked, then the property must be uniquely named, and it is acces Pintasan saat ini: - + + To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + + + &New shortcut: &New shortcut: - + Multi-key sequence delay: Multi-key sequence delay: - + Time in milliseconds to wait for the next key stroke of the current key sequence. For example, pressing 'F' twice in less than the time delay setting here will be be treated as shorctcut key sequence 'F, F'. @@ -1275,7 +1262,7 @@ For example, pressing 'F' twice in less than the time delay setting here will be be treated as shorctcut key sequence 'F, F'. - + This list shows commands having the same shortcut in the priority from high to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. @@ -1284,52 +1271,52 @@ to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. - + Shortcut priority list: Shortcut priority list: - + &Assign &Menetapkan - + Alt+A Alt + A - + Clear Bersih - + &Reset &Reset - + Alt+R Alt+R - + Re&set All Re&set All - + Alt+S Alt + S - + Up Naik - + Down Turun @@ -1341,48 +1328,48 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomKeyboardImp - + Type to search... Type to search... - + Icon Ikon - + Command Perintah - + Shortcut Shortcut - + Default Bawaan - + Name Nama - + Title Judul - + All Semua - - + + none tidak ada @@ -1390,8 +1377,8 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolBoxbarsImp - - + + Toolbox bars Bilah alat kotak @@ -1469,51 +1456,51 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - + Global Global - + Command Perintah - - + + <Separator> <Separator> - + %1 module not loaded %1 module not loaded - + New toolbar Toolbar baru - - + + Toolbar name: Nama Toolbar: - - + + Duplicated name Nama duplikat - - + + The toolbar name '%1' is already used Nama toolbar ' % 1 ' sudah digunakan - + Rename toolbar Ubah nama toolbar @@ -1547,13 +1534,13 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomizeSpNavSettings - + Spaceball Motion Spaceball gerak - + No Spaceball Present Tidak ada spaceball yang hadir @@ -1561,27 +1548,27 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomizeSpaceball - + Spaceball Buttons Tombol Spaceball - + No Spaceball Present Tidak ada spaceball yang hadir - + Buttons Tombol - + Reset Setel ulang - + Print Reference Referensi Cetak @@ -1666,112 +1653,112 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgDisplayPropertiesImp - + Default Bawaan - + Aluminium Aluminium - + Brass Kuningan - + Bronze Perunggu - + Copper Tembaga - + Chrome Chrome - + Emerald Zamrud - + Gold Emas - + Jade Giok - + Metalized Metalized - + Neon GNC Neon GNC - + Neon PHC Neon PHC - + Obsidian Obsidian - + Pewter Timah - + Plaster Plester - + Plastic Plastik - + Ruby Rubi - + Satin Satin - + Shiny plastic Plastik mengkilap - + Silver Perak - + Steel Baja - + Stone Batu @@ -1907,47 +1894,36 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgGeneral - General Umum - - Language - Bahasa - - - - Change language: - Ganti Bahasa: - - - + Language of the application's user interface Language of the application's user interface - + Number format: Number format: - + Operating system Sistem operasi - + Selected language Selected language - + C/POSIX C/POSIX - + If enabled, numerical keypad decimal separator will be substituted with locale separator, except in Python Console and Macro Editor where a @@ -1958,116 +1934,144 @@ in Python Console and Macro Editor where a dot/period will always be printed. - - Substitute decimal separator (numpad) - Substitute decimal separator (numpad) - - - + Preference packs Preference packs - + Name Nama - + Type Jenis - + Load Muat - + Import config... Import config... - + Save new... Save new... - + Manage... Manage... - + Revert... Revert... - - Main window - Jendela utama - - - - Size of recent file list - Ukuran daftar file terbaru - - - + How many files should be listed in recent files list How many files should be listed in recent files list - - Background of the main window will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. - Background of the main window will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. - - - + Enable tiled background Aktifkan latar belakang ubin - + The text cursor will be blinking The text cursor will be blinking - + Enable cursor blinking Enable cursor blinking - + Style sheet: Style sheet: - + + Language and number format + Language and number format + + + + Language: + Language: + + + + Unit system: + Sistem satuan: + + + + Unit system that should be used for all parts of the application + Unit system that should be used for all parts of the application + + + + Number of decimals: + Jumlah desimal: + + + + Number of decimals that should be shown for numbers and dimensions + Number of decimals that should be shown for numbers and dimensions + + + + Minimum fractional inch: + Minimum fractional inch: + + + + Minimum fractional inch to be displayed + Minimum fractional inch to be displayed + + + + Substitute decimal separator + Substitute decimal separator + + + + Application + Aplikasi + + + Style sheet how user interface will look like Style sheet how user interface will look like - + Size of toolbar icons: Ukuran ikon toolbar: - + Choose your preference for toolbar icon size. You can adjust this according to your screen size or personal taste Choose your preference for toolbar icon size. You can adjust this according to your screen size or personal taste - + Tree view mode: Tree view mode: - + Customize how tree view is shown in the panel (restart required). 'ComboView': combine tree view and property view into one panel. @@ -2080,42 +2084,19 @@ this according to your screen size or personal taste 'Both': keep all three panels, and you can have two sets of tree view and property view. - - Workbench selector position : - Workbench selector position : + + Size of recent file list: + Size of recent file list: - - Customize where the workbench selector appears (restart required). - -'Toolbar': In the toolbars, as a movable toolbar. -'Left Corner': In the menu bar, on the left corner. -'Right Corner': In the menu bar, on the right corner. - Customize where the workbench selector appears (restart required). - -'Toolbar': In the toolbars, as a movable toolbar. -'Left Corner': In the menu bar, on the left corner. -'Right Corner': In the menu bar, on the right corner. + + Background of the main window (when no document is opened) will consist of tiles of a special image. +See the FreeCAD Wiki for details about the image. + Background of the main window (when no document is opened) will consist of tiles of a special image. +See the FreeCAD Wiki for details about the image. - - Start up - Memulai - - - - Auto load module after start up: - Modul beban otomatis setelah start up: - - - - Choose which workbench will be activated and shown -after FreeCAD launches - Choose which workbench will be activated and shown -after FreeCAD launches - - - + A Splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen @@ -2124,7 +2105,7 @@ when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen - + Enable splash screen at start up Aktifkan layar splash saat start up @@ -2132,105 +2113,90 @@ display the splash screen Gui::Dialog::DlgGeneralImp - + Manage preference packs Manage preference packs - + Small (%1px) Kecil ( % 1p x) - + Medium (%1px) Sedang ( % 1p x) - + Large (%1px) Besar ( % 1p x) - + Extra large (%1px) Ekstra besar (%1px) - + Custom (%1px) Custom (%1px) - + Combo View Tampilan Kombo - + TreeView and PropertyView TreeView and PropertyView - + Both Both - + No style sheet Tidak ada style sheet - + Preference Pack Name Preference Pack Name - + Tags Tags - + Apply Apply - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists File exists - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? - - - Toolbar - Bilah alat - - - - Left corner - Left corner - - - - Right corner - Right corner - Gui::Dialog::DlgInputDialog @@ -2247,8 +2213,8 @@ display the splash screen Gui::Dialog::DlgInspector - - + + Scene Inspector Adegan Inspektur @@ -2339,71 +2305,71 @@ display the splash screen Gui::Dialog::DlgMacroExecuteImp - - + + Macros Makro - + Read-only Baca saja - + Macro file File makro - + Enter a file name, please: Masukkan nama file, silahkan: - - - + + + Existing file File yang ada - + '%1'. This file already exists. ' % 1 '. File ini sudah ada. - + Cannot create file Tidak bisa membuat file - + Creation of file '%1' failed. Pembuatan file ' % 1 ' gagal. - + Delete macro Hapus makro - + Do you really want to delete the macro '%1'? Apakah Anda benar-benar ingin menghapus makro ' % 1 '? - + Do not show again Jangan tunjukkan lagi - + Guided Walkthrough Guided Walkthrough - + This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. Note: your changes will be applied when you next switch workbenches @@ -2414,77 +2380,77 @@ Note: your changes will be applied when you next switch workbenches - + Walkthrough, dialog 1 of 2 Walkthrough, dialog 1 of 2 - + Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close - + Walkthrough, dialog 1 of 1 Walkthrough, dialog 1 of 1 - + Walkthrough, dialog 2 of 2 Walkthrough, dialog 2 of 2 - + Walkthrough instructions: Click right arrow button (->), then Close. Walkthrough instructions: Click right arrow button (->), then Close. - + Walkthrough instructions: Click New, then right arrow (->) button, then Close. Walkthrough instructions: Click New, then right arrow (->) button, then Close. - + Renaming Macro File Mengganti nama file makro - - + + Enter new name: Masukkan nama baru: - - + + '%1' already exists. ' %1 ' sudah ada. - + Rename Failed Ganti nama Gagal - + Failed to rename to '%1'. Perhaps a file permission error? Gagal mengganti nama menjadi ' % 1 '. Mungkin file permission error? - + Duplicate Macro Duplicate Macro - + Duplicate Failed Duplicate Failed - + Failed to duplicate to '%1'. Perhaps a file permission error? Failed to duplicate to '%1'. @@ -2499,67 +2465,67 @@ Perhaps a file permission error? Rekaman makro - + Macro name: Nama Makro: - + Macro path: Jalur makro: - + Record Merekam - + Stop Berhenti - - Cancel - Membatalkan + + Close + Dekat Gui::Dialog::DlgMacroRecordImp - - - + + + Macro recorder Perekam Makro - + Specify first a place to save. Tentukan dulu tempat untuk menyimpan. - + The macro directory doesn't exist. Please, choose another one. Direktori makro tidak ada. Tolong pilih yang lain. - + Existing macro Makro yang ada - + The macro '%1' already exists. Do you want to overwrite? Makro ' % 1 ' sudah ada. Apakah Anda ingin menimpa? - + You have no write permission for the directory. Please, choose another one. Anda tidak memiliki izin menulis untuk direktori. Tolong pilih yang lain. - + Choose macro directory Pilih direktori makro @@ -2731,17 +2697,17 @@ Specify another directory, please. Match whole string only - + Find Next Find Next - + Not found Tidak ditemukan - + Can't find the text: %1 Can't find the text: %1 @@ -2749,51 +2715,51 @@ Specify another directory, please. Gui::Dialog::DlgParameterImp - - + + Group Kelompok - - + + Name Nama - - + + Type Jenis - - + + Value Nilai - + System parameter Sistem parameter - + User parameter Parameter pengguna - + Search Group Search Group - + Invalid input Input tidak valid - + Invalid key name '%1' Nama kunci tidak valid '%1' @@ -2864,25 +2830,45 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Clear user settings Hapus pengaturan pengguna - + Do you want to clear all your user settings? Apakah Anda ingin menghapus semua pengaturan pengguna Anda? - + If you agree all your settings will be cleared. Jika Anda setuju semua pengaturan Anda akan dihapus. - + Wrong parameter Parameter yang salah + + + Restart required + Restart required + + + + You must restart FreeCAD for changes to take effect. + You must restart FreeCAD for changes to take effect. + + + + Restart now + Restart now + + + + Restart later + Restart later + Gui::Dialog::DlgProjectInformation @@ -2959,7 +2945,7 @@ Specify another directory, please. &Comment: - &Comment: + &Komentar"": @@ -3011,34 +2997,44 @@ Specify another directory, please. Muat file proyek setelah pembuatan - + Project file File proyek - - + + Empty source Sumber kosong - - + + No source is defined. Tidak ada sumber yang didefinisikan. - - + + Empty destination Tujuan kosong - - + + No destination is defined. Tidak ada tujuan yang ditentukan. + + + Failed to extract project + Failed to extract project + + + + Failed to create project + Failed to create project + Gui::Dialog::DlgPropertyLink @@ -3073,12 +3069,12 @@ Specify another directory, please. Pola pencarian untuk menyaring hasil di atas - + Reset Setel ulang - + Clear Bersih @@ -3402,22 +3398,12 @@ will be shown at the lower left corner in opened files Tampilkan counter frame per detik - - If checked, application will remember which workbench is active for each tab of the viewport - If checked, application will remember which workbench is active for each tab of the viewport - - - - Remember active workbench by tab - Remember active workbench by tab - - - + Rendering Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -3426,22 +3412,22 @@ Changing this option requires a restart of the application. Changing this option requires a restart of the application. - + Use software OpenGL Use software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Use OpenGL VBO (Vertex Buffer Object) - + Render cache Render cache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -3464,7 +3450,7 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -3481,106 +3467,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Mobil - + Distributed Distributed - + Centralized Centralized - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Tidak ada - + Line Smoothing Line Smoothing - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Transparent objects: - + Render types of transparent objects Render types of transparent objects - + One pass One pass - + Backface pass Backface pass - + Marker size: Marker size: - + Size of vertices in the Sketcher workbench Size of vertices in the Sketcher workbench - - Pick radius (px): - Pilih radius (px): - - - - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - - - - + Eye to eye distance for stereo modes Eye to eye distance for stereo modes - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3589,48 +3561,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color Backlight is enabled with the defined color - - + + Backlight color Backlight color - + Intensity Intensity - + Intensity of the backlight Intensity of the backlight - + Camera type Tipe kamera - + Objects will appear in a perspective projection Objects will appear in a perspective projection - + Perspective renderin&g Perspektif renderin & g - + Objects will be projected in orthographic projection Objects will be projected in orthographic projection - + Or&thographic rendering Atau & thographic rendering @@ -3642,42 +3614,42 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Buka penampil baru atau mulai ulang % 1 untuk menerapkan perubahan anti-aliasing. @@ -4093,8 +4065,8 @@ get date suffix according to the specified format - Allow objects to have same label/name - Allow objects to have same label/name + Allow objects to have same label + Allow objects to have same label @@ -4169,62 +4141,77 @@ You can also use the form: John Doe <john@doe.com> Default license for new documents - + All rights reserved Seluruh hak cipta - + Creative Commons Attribution Creative Commons Attribution - + Creative Commons Attribution-ShareAlike Creative Commons Attribution-ShareAlike - + Creative Commons Attribution-NoDerivatives Creative Commons Attribution-NoDerivatives - + Creative Commons Attribution-NonCommercial Creative Commons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial-ShareAlike Creative Commons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-NoDerivatives Creative Commons Attribution-NonCommercial-NoDerivatives - + Public Domain Area publik - + FreeArt FreeArt - + + CERN Open Hardware Licence strongly-reciprocal + CERN Open Hardware Licence strongly-reciprocal + + + + CERN Open Hardware Licence weakly-reciprocal + CERN Open Hardware Licence weakly-reciprocal + + + + CERN Open Hardware Licence permissive + CERN Open Hardware Licence permissive + + + Other Lain - + License URL URL lisensi - + URL describing more about the license URL describing more about the license @@ -4232,17 +4219,17 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp - + The format of the date to use. The format of the date to use. - + Default Bawaan - + Format Format @@ -4250,82 +4237,82 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsEditorImp - + Text Teks - + Bookmark Tanda buku - + Breakpoint Titik istirahat - + Keyword Kata kunci - + Comment Komentar - + Block comment Blok komentar - + Number Jumlah - + String Tali - + Character Karakter - + Class name Nama kelas - + Define name Tentukan nama - + Operator Operator - + Python output Keluaran Python - + Python error Kesalahan Python - + Current line highlight Sorotan saluran saat ini - + Items Item @@ -4487,92 +4474,26 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsImageImp - + Offscreen (New) Offscreen (New) - + Offscreen (Old) Offscreen (Old) - + Framebuffer (custom) Framebuffer (custom) - + Framebuffer (as is) Framebuffer (as is) - - Gui::Dialog::DlgSettingsLazyLoaded - - - Available Workbenches - Available Workbenches - - - - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> - - - - Workbench Name - Workbench Name - - - - Autoload? - Autoload? - - - - Load Now - Load Now - - - - Gui::Dialog::DlgSettingsLazyLoadedImp - - - Workbench - Meja kerja - - - - Autoload - Autoload - - - - If checked - If checked - - - - will be loaded automatically when FreeCAD starts up - will be loaded automatically when FreeCAD starts up - - - - This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. - This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. - - - - Loaded - Loaded - - - - Load now - Load now - - Gui::Dialog::DlgSettingsMacro @@ -4700,7 +4621,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigasi @@ -4761,43 +4682,75 @@ You can also use the form: John Doe <john@doe.com> + Font name: + Font name: + + + + Font name of the navigation cube + Font name of the navigation cube + + + Cube size Ukuran kubus - + Size of the navigation cube Ukuran kubus navigasi - + + Font size: + Font size: + + + + Font size of the navigation cube + Font size of the navigation cube + + + + Button color + Button color + + + + color for all elements +around the cube + color for all elements +around the cube + + + 3D Navigation Navigasi 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - + Mouse... Mouse... - + Navigation settings set Navigation settings set - + Orbit style Gaya Orbit - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4808,116 +4761,116 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Turntable - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Rotation mode - + Rotations in 3D will use current cursor position as center for rotation Rotations in 3D will use current cursor position as center for rotation - + Window center Window center - + Drag at cursor Drag at cursor - + Object center Pusat objek - + Default camera orientation Default camera orientation - + Default camera orientation when creating a new document or selecting the home view Default camera orientation when creating a new document or selecting the home view - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - + mm mm - + Enable animated rotations Enable animated rotations - + Enable animation Aktifkan animasi - + Zoom operations will be performed at position of mouse pointer Zoom operations will be performed at position of mouse pointer - + Zoom at cursor Perbesar kursor - + Zoom step Zoom step - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted Direction of zoom operations will be inverted - + Invert zoom Balikkan zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4926,57 +4879,57 @@ Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture Disable touchscreen tilt gesture - + Isometric Isometrik - + Dimetric Dimetrik - + Trimetric Trimetrik - + Top Puncak - + Front Depan - + Left Kiri - + Right Kanan - + Rear Belakang - + Bottom Bawah - + Custom Adat @@ -5035,128 +4988,44 @@ horizontal space in Python console + Pick radius (px): + Pilih radius (px): + + + + Area for picking elements in 3D view. +Larger value eases to pick things, but can make small features impossible to select. + + Area for picking elements in 3D view. +Larger value eases to pick things, but can make small features impossible to select. + + + + Auto switch to the 3D view containing the selected item Auto switch to the 3D view containing the selected item - + Auto expand tree item when the corresponding object is selected in 3D view Auto expand tree item when the corresponding object is selected in 3D view - + Preselect the object in 3D view when mouse over the tree item Preselect the object in 3D view when mouse over the tree item - + Record selection in tree view in order to go back/forward using navigation button Record selection in tree view in order to go back/forward using navigation button - + Add checkboxes for selection in document tree Add checkboxes for selection in document tree - - Gui::Dialog::DlgSettingsUnits - - - Units - Unit - - - - Units settings - Pengaturan unit - - - - Unit system: - Sistem satuan: - - - - Unit system that should be used for all parts the application - Unit system that should be used for all parts the application - - - - Number of decimals: - Jumlah desimal: - - - - Number of decimals that should be shown for numbers and dimensions - Number of decimals that should be shown for numbers and dimensions - - - - Minimum fractional inch: - Minimum fractional inch: - - - - Minimum fractional inch to be displayed - Minimum fractional inch to be displayed - - - - Magnitude - Besarnya - - - - Unit - Satuan - - - - Standard (mm/kg/s/degree) - Standar (mm / kg / s / derajat) - - - - MKS (m/kg/s/degree) - MKS (m / kg / s / derajat) - - - - US customary (in/lb) - Kebiasaan AS (dalam / lb) - - - - Imperial decimal (in/lb) - Bilangan desimal Kekaisaran (dalam / lb) - - - - Building Euro (cm/m²/m³) - Gedung Euro (cm / m² / m³) - - - - Building US (ft-in/sqft/cft) - Building US (ft-in/sqft/cft) - - - - Metric small parts & CNC(mm, mm/min) - Metrik bagian kecil & CNC (mm, mm / menit) - - - - Imperial for Civil Eng (ft, ft/sec) - Imperial for Civil Eng (ft, ft/sec) - - - - FEM (mm, N, s) - FEM (mm, N, s) - - Gui::Dialog::DlgSettingsViewColor @@ -5200,82 +5069,110 @@ horizontal space in Python console Warna latar belakang - - + + Background will have selected color Background will have selected color - + Simple color Warna sederhana - + + Background will have selected color gradient Background will have selected color gradient - - Color gradient - Warna gradien + + Linear gradient + Linear gradient - - Top color - Top color + + Radial gradient + Radial gradient - + + + Top: + Top: + + + + + Middle: + Middle: + + + Switches the colors of the gradient Switches the colors of the gradient - + Switch Switch - - Bottom color - Bottom color - - - + Color gradient will get selected color as middle color Color gradient will get selected color as middle color - - + Middle color Warna tengah - + + + Bottom: + Bottom: + + + Tree view Tampilan pohon - + Object being edited Object being edited - + Background color for objects in tree view that are currently edited Background color for objects in tree view that are currently edited - + Active container Active container - + Background color for active containers in tree view Background color for active containers in tree view + + + Central: + Central: + + + + Midway: + Midway: + + + + End: + End: + Gui::Dialog::DlgTipOfTheDay @@ -5384,95 +5281,16 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - + unknown unit: unknown unit: - + unit mismatch unit mismatch - - Gui::Dialog::DlgWorkbenches - - - Workbenches - Workbenches - - - - Disabled workbenches - Meja kerja yang cacat - - - - Enabled workbenches - Diaktifkan meja kerja - - - - Move right - Bergerak ke kanan - - - - <html><head/><body><p><span style=" font-weight:600;">Move the selected workbench to enabled workbenches.</span></p></body></html> - <html> <head> <body> <p> <span style = "font-weight: 600;"> Pindahkan meja kerja yang dipilih ke meja kerja yang aktif. </ span> </ p> </ body> </ html> - - - - Move up - Pindah ke atas - - - - <html><head/><body><p><span style=" font-weight:600;">Move the selected item up.</span></p><p>The item will be moved up.</p></body></html> - <html> <head> <body> <p> <span style = "font-weight: 600;"> Pindahkan item yang dipilih ke atas. </ span> </ p> <p> Item akan dipindahkan ke atas. </ p> </ body> </ html> - - - - Add all to enabled workbenches - Tambahkan semua untuk mengaktifkan workbenches - - - - - <html><head/><body><p><span style=" font-weight:600;">Remove the selected workbench from enabled workbenches</span></p></body></html> - <html> <head> <body> <p> <span style = "font-weight: 600;"> Hapus meja kerja yang dipilih dari meja kerja yang aktif </ span> </ p> </ body> </ html> - - - - Sort enabled workbenches - Urutkan meja kerja yang diaktifkan - - - - <p>Sort enabled workbenches</p> - <p>Sort enabled workbenches</p> - - - - Move left - Pindah ke kiri - - - - Move down - Pindah ke bawah - - - - <html><head/><body><p><span style=" font-weight:600;">Move the selected item down.</span></p><p>The item will be moved down</p></body></html> - <html> <head> <body> <p> <span style = "font-weight: 600;"> Pindahkan item yang dipilih ke bawah. </ span> </ p> <p> Item akan dipindahkan ke </ p> </ body> </ html> - - - - <html><head/><body><p><span style=" font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> - <html><head/><body><p><span style=" font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> - - Gui::Dialog::DockablePlacement @@ -5516,70 +5334,70 @@ The 'Status' column shows whether the document could be recovered. Membersihkan... - + Start Recovery Mulai pemulihan - + Not yet recovered Belum pulih - + Unknown problem occurred Masalah tak diketahui terjadi - - + + Failed to recover Gagal pulih - + Successfully recovered Berhasil pulih - + Finish Selesai - - + + Delete Menghapus - - + + Cleanup Membersihkan - + Are you sure you want to delete the selected transient directories? Yakin ingin menghapus direktori transien yang dipilih? - + When deleting the selected transient directory you won't be able to recover any files afterwards. Saat menghapus direktori transien yang dipilih, Anda tidak akan dapat memulihkan file apa pun setelahnya. - + Are you sure you want to delete all transient directories? Yakin ingin menghapus semua direktori transien? - + When deleting all transient directories you won't be able to recover any files afterwards. When deleting all transient directories you won't be able to recover any files afterwards. - + Transient directories deleted. Direktori sementara dihapus. @@ -5698,12 +5516,12 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::IconDialog - + Icon folders Folder ikon - + Add icon folder Tambahkan folder ikon @@ -5711,17 +5529,17 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::IconFolders - + Add or remove custom icon folders Tambahkan atau hapus folder ikon khusus - + Remove folder Hapus folder - + Removing a folder only takes effect after an application restart. Melepaskan folder hanya akan berpengaruh setelah aplikasi di-restart. @@ -5773,8 +5591,8 @@ The 'Status' column shows whether the document could be recovered. - Panning - Panning + Panning: + Panning: @@ -5790,80 +5608,80 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::ParameterGroup - - - + + + Expand Memperluas - - + + Add sub-group Tambahkan subkelompok - - - + + + Remove group Hapus grup - - + + Rename group Ubah nama grup - - + + Export parameter Parameter ekspor - - + + Import parameter Parameter impor - + Collapse Jatuh - + Do you really want to remove this parameter group? Do you really want to remove this parameter group? - + Existing sub-group Sub kelompok yang ada - + The sub-group '%1' already exists. Sub kelompok ' % 1 ' sudah ada. - + Export parameter to file Ekspor parameter ke file - + Import parameter from file Impor parameter dari file - + Import Error Kesalahan Impor - + Reading from '%1' failed. Membaca dari ' % 1 ' gagal. @@ -5871,65 +5689,65 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::ParameterValue - + Change value Ubah nilai - + Remove key Hapus kunci - + Rename key Ganti nama kunci - + New Baru - + New string item Item string baru - + New float item Item pelampung baru - + New integer item Item bilangan bulat baru - + New unsigned item Item unsigned baru - + New Boolean item Item Boolean baru - - - - - + + + + + Existing item Item yang ada - - - - - + + + + + The item '%1' already exists. Item ' % 1 ' sudah ada. @@ -6093,12 +5911,12 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::PrintModel - + Button Tombol - + Command Perintah @@ -6200,27 +6018,27 @@ The 'Status' column shows whether the document could be recovered. Lingkungan Hidup - + Image files (%1) File gambar ( % 1) - + No image Tidak ada gambar - + The specified file is not a valid image file. Yang ditentukan File bukan gambar yang valid berkas. - + No 3d view Tidak ada tampilan 3d - + No active 3d view found. Tidak ditemukan tampilan 3d yang aktif. @@ -6228,14 +6046,14 @@ The 'Status' column shows whether the document could be recovered. Gui::Dialog::Transform - - + + Cancel Membatalkan - - + + Transform Transform @@ -6332,14 +6150,14 @@ originally selected prior to opening this dialog Tampilan Kombo - - + + Model Model - - + + Tasks Tugas @@ -6355,76 +6173,82 @@ originally selected prior to opening this dialog Gui::DockWnd::ReportOutput - + Options Pilihan - + Display message types Display message types - - + + Normal messages Normal messages - - + + Log messages Log messages - - + + Warnings Peringatan - - + + Errors Galat - + + + Critical messages + Critical messages + + + Show Report view on Show Report view on - + Redirect Python output Redirect Python output - + Redirect Python errors Redirect kesalahan Python - + Go to end Pergi ke akhir - + Clear Bersih - + Save As... Simpan Sebagai... - + Save Report Output Simpan Laporan Output - + Plain Text Files File Teks Biasa @@ -6432,14 +6256,14 @@ originally selected prior to opening this dialog Gui::DockWnd::ReportView - - + + Output Keluaran - - + + Python console Konsol Python @@ -6477,72 +6301,72 @@ originally selected prior to opening this dialog Picked object list - + Select only Pilih saja - + Selects only this object Pilih hanya objek ini - + Deselect Hapus pilihan - + Deselects this object Menghilangkan objek ini - + Zoom fit Zoom pas - + Selects and fits this object in the 3D window Memilih dan menyesuaikan objek ini di jendela 3D - + Go to selection Pergi ke seleksi - + Selects and locates this object in the tree view Memilih dan menempatkan ini objek di pohon tampilan - + Mark to recompute Tandai untuk menghitung ulang - + Mark this object to be recomputed Tandai objek ini untuk dihitung ulang - + To python console Untuk konsol python - + Reveals this object and its subelements in the python console. Mengungkapkan objek ini dan subelemennya di konsol python. - + Duplicate subshape Duplikat subshape - + Creates a standalone copy of this subshape in the document Membuat salinan mandiri dari subshape ini di dalam dokumen @@ -6563,65 +6387,65 @@ originally selected prior to opening this dialog Gui::EditorView - + Modified file File yang dimodifikasi - + %1. This has been modified outside of the source editor. Do you want to reload it? % 1. Ini telah dimodifikasi di luar editor sumber. Apakah Anda ingin memuat ulang? - + Unsaved document Dokumen yang belum disimpan - + The document has been modified. Do you want to save your changes? The dokumen telah dimodifikasi. Apakah Anda ingin menyimpan perubahan Anda? - + FreeCAD macro Makro FreeCAD - + Export PDF Ekspor PDF - + PDF file File PDF - + untitled[*] untitled [*] - + - Editor - Editor - + %1 chars removed % 1 karakter dihapus - + %1 chars added % 1 karakter ditambahkan - + Formatted Terformat @@ -6629,7 +6453,7 @@ Do you want to save your changes? Gui::ExpressionLineEdit - + Exact match Sama persis @@ -6637,7 +6461,7 @@ Do you want to save your changes? Gui::ExpressionTextEdit - + Exact match Sama persis @@ -6645,13 +6469,13 @@ Do you want to save your changes? Gui::FileChooser + - Select a file Pilih berkas - + Select a directory Pilih sebuah direktori @@ -6686,27 +6510,27 @@ Do you want to save your changes? Gui::Flag - + Top left Kiri atas - + Bottom left Kiri bawah - + Top right Kanan atas - + Bottom right Kanan bawah - + Remove Menghapus @@ -6812,12 +6636,12 @@ Do you want to save your changes? Gui::InputField - + Edit Edit - + Save value Simpan value @@ -6946,8 +6770,7 @@ Do you want to save your changes? Gui::MacroCommand - - + Macros Makro @@ -6965,63 +6788,63 @@ Do you want to save your changes? Gui::MainWindow - - + + Dimension Dimensi - + Ready Siap - + Help addon needed! Help addon needed! - + The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager - + Open Addon Manager Open Addon Manager - + Close All Tutup semua - - - + + + Toggles this toolbar Toggles toolbar ini - - - + + + Toggles this dockable window Matikan jendela dockable ini - - + + Unsaved document Dokumen yang belum disimpan - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -7031,96 +6854,96 @@ Do you want to save the document now? Gui::ManualAlignment - - - - - + + + + + Manual alignment Penyelarasan manual - + The alignment is already in progress. Keselarasan sudah berlangsung. - + Alignment[*] Penjajaran[*] - + Please, select at least one point in the left and the right view Harap pilih setidaknya satu titik di kiri dan kanan tampilan - + Please, select at least %1 points in the left and the right view Silakan, pilih setidaknya % 1 poin di kiri dan kanan tampilan - + Please pick points in the left and right view Silakan memilih poin di kiri dan kanan tampilan - + The alignment has finished Keselarasan telah selesai - + The alignment has been canceled Keselarasan telah dibatalkan - - + + Too few points picked in the left view. At least %1 points are needed. Terlalu beberapa poin dijemput di kiri tampilan. Setidaknya dibutuhkan 1 poin. - - + + Too few points picked in the right view. At least %1 points are needed. Terlalu beberapa poin dijemput di kanan tampilan. Setidaknya dibutuhkan 1 poin. - + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. Nomor yang berbeda dari poin dijemput di kiri dan kanan tampilan. Di sebelah kiri tampilan % 1 poin dipetik, di sebelah kanan tampilan % 2 poin dipetik. - + Try to align group of views Cobalah untuk menyelaraskan kelompok pandangan - + The alignment failed. How do you want to proceed? Keselarasan gagal. Bagaimana Anda ingin melanjutkan? - + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. Nomor yang berbeda dari poin dijemput di kiri dan kanan tampilan. Di sebelah kiri tampilan % 1 poin dipetik, di sebelah kanan tampilan % 2 poin dipetik. - + Point picked at (%1,%2,%3) Titik diambil pada ( % 1, % 2, % 3) - + No point was found on model Tidak ada titik ditemukan pada model - + No point was picked Tidak ada gunanya dipilih @@ -7213,17 +7036,17 @@ How do you want to proceed? Gui::PrefQuantitySpinBox - + Edit Edit - + Save value Simpan value - + Clear list Hapus daftar @@ -7249,17 +7072,17 @@ How do you want to proceed? Gui::ProgressDialog - + Remaining: %1 Sisa: % 1 - + Aborting Aborting - + Do you really want to abort the operation? Apakah Anda benar-benar ingin membatalkan operasi? @@ -7267,7 +7090,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel - + Change the linked object Ubah objek yang terhubung @@ -7275,12 +7098,12 @@ How do you want to proceed? Gui::PropertyEditor::LinkSelection - + Error Kesalahan - + Object not found objek tidak ditemukan @@ -7288,48 +7111,48 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Edit - + property property - + Auto expand Auto expand - + Show all Tunjukkan semua - + Expression... Ekspresi... - + Add property Add property - - + + Rename property group Rename property group - + Remove property Remove property - + Group name: Group name: @@ -7365,116 +7188,116 @@ How do you want to proceed? Gui::PythonConsole - + System exit Keluar sistem - + The application is still running. Do you want to exit without saving your data? Aplikasi masih berjalan. Apakah Anda ingin keluar tanpa menyimpan data Anda? - - - - + + + + Python console Konsol Python - + Unhandled PyCXX exception. Pengecualian PyCXX yang tidak tertangani. - + Unhandled FreeCAD exception. Pengecualian FreeCAD yang tidak tertangani. - + Unhandled std C++ exception. Unhandled std C + + pengecualian. - + Unhandled unknown C++ exception. Unhandled tidak diketahui C ++ exception. - + &Copy &Salinan - + &Copy command & Perintah Salin - + &Copy history & Salin riwayat - + Save history as... Simpan sejarah sebagai... - + Save history Simpan riwayat - + Saves Python history across %1 sessions Saves Python history across %1 sessions - + &Paste &Pasta - + Select All Pilih Semua - + Clear console Hapus konsol - + Insert file name... Sisipkan nama file... - + Word wrap Bungkus kata - + Save History Simpan Riwayat - + Macro Files Makro File - + Insert file name Masukkan nama file - + All Files Semua data @@ -7482,12 +7305,12 @@ Do you want to exit without saving your data? Gui::PythonEditor - + Comment Komentar - + Uncomment Uncomment @@ -7495,17 +7318,17 @@ Do you want to exit without saving your data? Gui::RecentFilesAction - + Open file %1 Buka file % 1 - + File not found Berkas tidak ditemukan - + The file '%1' cannot be opened. File ' % 1 ' tidak dapat dibuka. @@ -7513,22 +7336,22 @@ Do you want to exit without saving your data? Gui::RecentMacrosAction - + none tidak ada - + Run macro %1 (Shift+click to edit) keyboard shortcut: %2 Run macro %1 (Shift+click to edit) keyboard shortcut: %2 - + File not found Berkas tidak ditemukan - + The file '%1' cannot be opened. File ' % 1 ' tidak dapat dibuka. @@ -7559,22 +7382,22 @@ Do you want to exit without saving your data? Gui::SearchBar - + Previous Sebelumnya - + Next Next - + Case sensitive Case sensitive - + Whole words Whole words @@ -7582,17 +7405,17 @@ Do you want to exit without saving your data? Gui::SelectModule - + Select module Pilih modul - + Open %1 as Buka % 1 sebagai - + Select Memilih @@ -7671,7 +7494,7 @@ Do you want to specify another directory? Gui::TaskBoxAngle - + Angle Sudut @@ -7697,7 +7520,7 @@ Do you want to specify another directory? Translation Increment: - + Rotation Increment: Rotation Increment: @@ -7787,7 +7610,7 @@ Do you want to specify another directory? Gui::TaskView::TaskDialog - + A dialog is already open in the task panel A dialog is already open in the task panel @@ -7917,191 +7740,201 @@ Do you want to specify another directory? + Belarusian + Belarusian + + + Bulgarian Bulgarian - + Catalan Catalan - + Chinese Simplified Bahasa Tiongkok disederhanakan - + Chinese Traditional Bahasa Tiongkok Tradisional - + Croatian Kroasia - + Czech Ceko - + Dutch Belanda - + English Bahasa Inggris - + Filipino Filipino - + Finnish Finlandia - + French Bahasa Perancis - + Galician Galician - + German Bahasa Jerman - + Greek Yunani - + Hungarian Bahasa Hungaria - + Indonesian Indonesian - + Italian Italia - + Japanese Bahasa Jepang - + Kabyle Kabyle - + Korean Korean - + Lithuanian Lithuanian - + Norwegian Bahasa Norwegia - + Polish Bahasa Polandia - + Portuguese, Brazilian Portuguese, Brazilian - + Portuguese Bahasa Portugis - + Romanian Rumania - + Russian Rusia - + Serbian Bahasa Serbia - + + Serbian, Latin + Serbian, Latin + + + Slovak Slovakia - + Slovenian Slovenia - + Spanish Spanyol - + Spanish, Argentina Spanish, Argentina - + Swedish Swedia - + Turkish Turki - + Ukrainian Ukraina - + Valencian Valencian - + Vietnamese Vietnamese - + Georgian Georgian @@ -8109,7 +7942,7 @@ Do you want to specify another directory? Gui::TreeDockWidget - + Tree view Tampilan pohon @@ -8117,7 +7950,7 @@ Do you want to specify another directory? Gui::TreePanel - + Search Pencarian @@ -8125,173 +7958,173 @@ Do you want to specify another directory? Gui::TreeWidget - + Search... Search... - + Search for objects Search for objects - + Activate document Aktifkan dokumen - + Activate document %1 Aktifkan dokumen % 1 - + Group Kelompok - + Labels & Attributes Label & Atribut - + Description Description - + Application Aplikasi - - Show hidden items - Show hidden items + + Show items hidden in tree view + Show items hidden in tree view - - Show hidden tree view items - Show hidden tree view items + + Show items that are marked as 'hidden' in the tree view + Show items that are marked as 'hidden' in the tree view - - Hide item - Hide item + + Toggle visibility in tree view + Toggle visibility in tree view - - Hide the item in tree - Hide the item in tree + + Toggles the visibility of selected items in the tree view + Toggles the visibility of selected items in the tree view - + Create group... Membuat grup... - + Create a group Buat grup - - + + Rename Ganti nama - + Rename object Ganti nama objek - + Finish editing Selesai mengedit - + Finish editing object Selesai mengedit objek - + Add dependent objects to selection Add dependent objects to selection - + Adds all dependent objects to the selection Adds all dependent objects to the selection - + Close document Tutup dokumen - + Close the document Tutup dokumen ini - + Reload document Muat ulang dokumen - + Reload a partially loaded document Reload a partially loaded document - + Skip recomputes Lewati rekomputasi - + Enable or disable recomputations of document Mengaktifkan atau menonaktifkan rekomputasi dokumen - + Allow partial recomputes Allow partial recomputes - + Enable or disable recomputating editing object when 'skip recomputation' is enabled Enable or disable recomputating editing object when 'skip recomputation' is enabled - + Mark to recompute Tandai untuk menghitung ulang - + Mark this object to be recomputed Tandai objek ini untuk dihitung ulang - + Recompute object Recompute object - + Recompute the selected object Recompute the selected object - + (but must be executed) (but must be executed) - + %1, Internal name: %2 % 1, Nama internal: % 2 @@ -8312,22 +8145,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Ekspor PDF - + PDF file File PDF - + Opening file failed Membuka file gagal - + Can't open file '%1' for writing. Tidak bisa membuka file ' % 1 ' untuk tulisan. @@ -8335,8 +8168,8 @@ Do you want to specify another directory? Gui::WorkbenchGroup - - + + Select the '%1' workbench Pilih meja kerja ' % 1 ' @@ -8344,37 +8177,37 @@ Do you want to specify another directory? MAC_APPLICATION_MENU - + Services Jasa - + Hide %1 Sembunyikan % 1 - + Hide Others Sembunyikan Lainnya - + Show All Tunjukkan semua - + Preferences... Preferensi... - + Quit %1 Berhenti % 1 - + About %1 Sekitar % 1 @@ -8508,40 +8341,40 @@ Do you want to specify another directory? QDockWidget - + Tree view Tampilan pohon - + Property view Tampilan properti - + Selection view Tampilan pilihan - + Combo View Tampilan Kombo - + + DAG View + DAG View + + + Report view Tampilan laporan - + Python console Konsol Python - - - DAG View - DAG View - Display properties @@ -8551,60 +8384,64 @@ Do you want to specify another directory? QObject + + - - - - - General Umum - - - + + + Display Tampilan - + Workbenches Workbenches - - - + + + + Python + Python + + + + + Unknown filetype Filetype tidak diketahui - - + + Cannot open unknown filetype: %1 Tidak dapat membuka jenis filetype yang tidak diketahui: % 1 - + Export failed Export failed - + Cannot save to unknown filetype: %1 Tidak dapat menyimpan ke jenis filetype yang tidak diketahui: % 1 - + Workbench failure Kegagalan workbench - + %1 % 1 @@ -8619,305 +8456,348 @@ Do you want to specify another directory? Buka dokumen - - + + Error Kesalahan - + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. Ada kesalahan saat memuat file. Beberapa data mungkin telah dimodifikasi atau tidak dipulihkan sama sekali. Lihat di tampilan laporan untuk informasi yang lebih spesifik tentang objek yang terlibat. - + There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - + Import file Impor file - + Export file Ekspor file - + Printing... Pencetakan... - + Exporting PDF... Mengekspor PDF... - - + + Unsaved document Dokumen yang belum disimpan - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - - + + Delete failed Gagal menghapus - + Dependency error Dependency error - + Copy selected Copy selected - + Copy active document Salin dokumen aktif - + Copy all documents Salin semua dokumen - + Paste Tempel - + Expression error Galat ekspresi - + Failed to parse some of the expressions. Please check the Report View for more details. Failed to parse some of the expressions. Please check the Report View for more details. - + Failed to paste expressions Failed to paste expressions - - + + Cannot load workbench Tidak bisa memuat meja kerja - + A general error occurred while loading the workbench Kesalahan umum terjadi saat memuat meja kerja - - + + Wrong selection Pilihan salah - + Only one object selected. Please select two objects. Be aware the point where you click matters. Hanya satu objek yang dipilih. Silahkan pilih dua objek. Sadarilah titik di mana Anda mengklik hal-hal. - + Please select two objects. Be aware the point where you click matters. Silahkan pilih dua objek. Sadarilah titik di mana Anda mengklik hal-hal. - - + + Save views... Simpan tampilan... - - + + Load views... Muat tampilan... - - + + Freeze view Tampilan beku - - + + Clear views Pemandangan yang jelas - - - + + + Restore view &%1 Kembalikan tampilan & % 1 - + Save frozen views Simpan pemandangan beku - - + + Frozen views Tampilan beku - - + + Restore views Kembalikan penayangan - + Importing the restored views would clear the already stored views. Do you want to continue? Mengimpor tampilan yang dipulihkan akan menghapus tampilan yang sudah tersimpan. Apakah Anda ingin melanjutkan? - + Restore frozen views Kembalikan tampilan beku - + Cannot open file '%1'. Tidak bisa membuka file ' % 1 '. - + files file - - Save picture - Simpan gambar + + Save image + Save image - + + Choose an image file to open + Pilih file gambar yang akan dibuka + + + New sub-group Sub kelompok baru - - - - - - + + + + + + Enter the name: Masukkan nama: - - + + New text item Item teks baru - - + + Enter your text: Masukkan teks Anda: - - + + New integer item Item bilangan bulat baru - - - - - - + + + + + + Enter your number: Masukkan nomor anda: - - + + New unsigned item Item unsigned baru - - + + New float item Item pelampung baru - + New Boolean item Item Boolean baru - - + + Choose an item: Pilih item: - + New boolean item Item boolean baru - + Rename group Ubah nama grup - + The group '%1' cannot be renamed. Kelompok ' % 1 ' tidak dapat diganti namanya. - + Existing group Kelompok yang ada - + The group '%1' already exists. Kelompok ' % 1 ' sudah ada. - - - - - + + + + + Change value Ubah nilai - + + + Type + Jenis + + + + + Notifier + Notifier + + + + + Message + Message + + + + Notifier: + Notifier: + + + + Do you want to skip confirmation of further critical message notifications while loading the file? + Do you want to skip confirmation of further critical message notifications while loading the file? + + + + Critical Message + Critical Message + + + + Too many opened non-intrusive notifications. Notifications are being omitted! + Too many opened non-intrusive notifications. Notifications are being omitted! + + + Identical physical path detected. It may cause unwanted overwrite of existing document! @@ -8926,44 +8806,44 @@ Do you want to continue? - + Are you sure you want to continue? Apakah yakin ingin melanjutkan? - + Please check report view for more... Please check report view for more... - + Physical path: Physical path: - - + + Document: Document: - - + + Path: Jalan: - + Identical physical path Identical physical path - + Could not save document Could not save document - + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: "%1" @@ -8976,102 +8856,102 @@ Would you like to save the file with a different name? Would you like to save the file with a different name? - - - + + + Saving aborted Menyimpan dibatalkan - + Save dependent files Save dependent files - + The file contains external dependencies. Do you want to save the dependent files, too? The file contains external dependencies. Do you want to save the dependent files, too? - - + + Saving document failed Menyimpan dokumen gagal - + Save document under new filename... Simpan dokumen dengan nama file baru... - - + + Save %1 Document Simpan % 1 Dokumen - + Document Dokumen - - + + Failed to save document Gagal menyimpan dokumen - + Documents contains cyclic dependencies. Do you still want to save them? Documents contains cyclic dependencies. Do you still want to save them? - + Save a copy of the document under new filename... Simpan salinan dokumen di bawah nama file baru... - + %1 document (*.FCStd) % 1 dokumen (*.FCStd) - + Document not closable Dokumen tidak bisa ditutup - + The document is not closable for the moment. Dokumen ini tidak bisa ditutup untuk saat ini. - + Document not saved Document not saved - + The document%1 could not be saved. Do you want to cancel closing it? The document%1 could not be saved. Do you want to cancel closing it? - + Undo Urung - + Redo Redo - + There are grouped transactions in the following documents with other preceding transactions There are grouped transactions in the following documents with other preceding transactions - + Choose 'Yes' to roll back all preceding transactions. Choose 'No' to roll back in the active document only. Choose 'Abort' to abort @@ -9080,7 +8960,7 @@ Choose 'No' to roll back in the active document only. Choose 'Abort' to abort - + Save Macro Simpan Makro @@ -9152,12 +9032,12 @@ Please open a browser window and type in: http://localhost:%1. Pilihan... - + Out of memory Kehabisan memori - + Not enough memory available to display the data. Memori tidak cukup tersedia untuk menampilkan data. @@ -9189,47 +9069,47 @@ Please open a browser window and type in: http://localhost:%1. Transform - + Do you want to close this dialog? Do you want to close this dialog? - + Do you want to save your changes to document '%1' before closing? Apakah Anda ingin menyimpan perubahan Anda ke dokumen ' % 1 ' sebelum menutup? - + Do you want to save your changes to document before closing? Do you want to save your changes to document before closing? - + If you don't save, your changes will be lost. Jika Anda tidak menyimpan, perubahan Anda akan hilang. - + Apply answer to all Apply answer to all - + %1 Document(s) not saved %1 Document(s) not saved - + Some documents could not be saved. Do you want to cancel closing? Some documents could not be saved. Do you want to cancel closing? - + Delete macro Hapus makro - + Not allowed to delete system-wide macros Tidak diizinkan untuk menghapus makro sistem secara keseluruhan @@ -9322,36 +9202,36 @@ Please open a browser window and type in: http://localhost:%1. Gagal mengimpor semua tautan - - + + Invalid name Invalid name - + The property name or group name must only contain alpha numericals, underscore, and must not start with a digit. The property name or group name must only contain alpha numericals, underscore, and must not start with a digit. - + The property '%1' already exists in '%2' The property '%1' already exists in '%2' - + Add property Add property - + Failed to add property to '%1': %2 Failed to add property to '%1': %2 - - + + Drag & drop failed Drag & drop failed @@ -9458,6 +9338,11 @@ the current copy will be lost. Edit %1 Edit %1 + + + Change image... + Change image... + SelectionFilter @@ -9475,9 +9360,9 @@ the current copy will be lost. StdBoxElementSelection - - - + + + Box element selection Box element selection @@ -9485,9 +9370,9 @@ the current copy will be lost. StdBoxSelection - - - + + + Box selection Pemilihan kotak @@ -9495,13 +9380,13 @@ the current copy will be lost. StdCmdAbout - + &About %1 & Sekitar % 1 - - + + About %1 Sekitar % 1 @@ -9509,13 +9394,13 @@ the current copy will be lost. StdCmdAboutQt - + About &Qt Tentang & Qt - - + + About Qt Tentang Qt @@ -9523,13 +9408,13 @@ the current copy will be lost. StdCmdActivateNextWindow - + Ne&xt Berikutnya - - + + Activate next window Aktifkan jendela berikutnya @@ -9537,13 +9422,13 @@ the current copy will be lost. StdCmdActivatePrevWindow - + Pre&vious Sebelumnya - - + + Activate previous window Aktifkan jendela sebelumnya @@ -9551,37 +9436,23 @@ the current copy will be lost. StdCmdAlignment - + Alignment... Penjajaran... - - + + Align the selected objects Sejajarkan objek yang dipilih - - StdCmdArrangeIcons - - - Arrange &Icons - Atur & Ikon - - - - - Arrange Icons - Atur Ikon - - StdCmdAxisCross - - - + + + Toggle axis cross Alihkan sumbu silang @@ -9589,13 +9460,13 @@ the current copy will be lost. StdCmdCascadeWindows - + &Cascade &Riam - - + + Tile pragmatic Tile pragmatis @@ -9603,13 +9474,13 @@ the current copy will be lost. StdCmdCloseActiveWindow - + Cl&ose Dekat - - + + Close active window Tutup jendela aktif @@ -9617,13 +9488,13 @@ the current copy will be lost. StdCmdCloseAllWindows - + Close Al&l Tutup semua - - + + Close all windows Tutup semua jendela @@ -9631,13 +9502,13 @@ the current copy will be lost. StdCmdCommandLine - + Start command &line... Mulai perintah & baris... - - + + Opens the command line in the console Membuka baris perintah di konsol @@ -9645,13 +9516,13 @@ the current copy will be lost. StdCmdCopy - + C&opy Salinan - - + + Copy operation Copy operasi @@ -9659,13 +9530,13 @@ the current copy will be lost. StdCmdCut - + &Cut &Memotong - - + + Cut out Memotong @@ -9673,13 +9544,13 @@ the current copy will be lost. StdCmdDelete - + &Delete &Menghapus - - + + Deletes the selected objects Menghapus objek yang dipilih @@ -9687,13 +9558,13 @@ the current copy will be lost. StdCmdDemoMode - + View turntable... Lihat meja putar... - - + + View turntable Lihat meja putar @@ -9701,13 +9572,13 @@ the current copy will be lost. StdCmdDependencyGraph - + Dependency graph... Grafik Ketergantungan... - - + + Show the dependency graph of the objects in the active document Tampilkan grafik dependensi objek dalam dokumen aktif @@ -9715,13 +9586,13 @@ the current copy will be lost. StdCmdDlgCustomize - + Cu&stomize... Cu & stomize... - - + + Customize toolbars and command bars Sesuaikan bilah alat dan bilah perintah @@ -9771,13 +9642,13 @@ the current copy will be lost. StdCmdDlgParameter - + E&dit parameters ... Parameter E & dit ... - - + + Opens a Dialog to edit the parameters Membuka Dialog untuk mengedit parameter @@ -9785,13 +9656,13 @@ the current copy will be lost. StdCmdDlgPreferences - + &Preferences ... & Preferensi ... - - + + Opens a Dialog to edit the preferences Membuka Dialog untuk mengedit preferensi @@ -9799,13 +9670,13 @@ the current copy will be lost. StdCmdDockViewMenu - + Panels Panel - - + + List of available dock panels Daftar panel dock yang tersedia @@ -9813,13 +9684,13 @@ the current copy will be lost. StdCmdDrawStyle - + Draw style Menggambar gaya - - + + Change the draw style of the objects Change the draw style of the objects @@ -9827,13 +9698,13 @@ the current copy will be lost. StdCmdDuplicateSelection - + Duplicate selection Pilihan duplikat - - + + Put duplicates of the selected objects to the active document Letakkan duplikat dari objek yang dipilih ke dokumen yang aktif @@ -9841,17 +9712,17 @@ the current copy will be lost. StdCmdEdit - + Toggle &Edit mode Toggle & Edit mode - + Toggles the selected object's edit mode Mengaktifkan mode edit objek yang dipilih - + Activates or Deactivates the selected object's edit mode Activates or Deactivates the selected object's edit mode @@ -9859,23 +9730,23 @@ the current copy will be lost. StdCmdExport - + &Export... &Ekspor... - - + + Export an object in the active document Ekspor objek dalam dokumen aktif - + No selection Tidak ada pilihan - + Select the objects to export before choosing Export. Select the objects to export before choosing Export. @@ -9883,9 +9754,9 @@ the current copy will be lost. StdCmdExpression - - - + + + Expression actions Expression actions @@ -9907,12 +9778,12 @@ the current copy will be lost. StdCmdFreeCADDonation - + Donate Donasi - + Donate to FreeCAD development Donate to FreeCAD development @@ -9920,17 +9791,17 @@ the current copy will be lost. StdCmdFreeCADFAQ - + FreeCAD FAQ FAQ FreeCAD - + Frequently Asked Questions on the FreeCAD website Pertanyaan yang Sering Diajukan di situs FreeCAD - + Frequently Asked Questions Pertanyaan yang Sering Diajukan @@ -9938,17 +9809,17 @@ the current copy will be lost. StdCmdFreeCADForum - + FreeCAD Forum Forum FreeCAD - + The FreeCAD forum, where you can find help from other users Forum FreeCAD, di mana Anda dapat menemukan bantuan dari pengguna lain - + The FreeCAD Forum Forum FreeCAD @@ -9956,17 +9827,17 @@ the current copy will be lost. StdCmdFreeCADPowerUserHub - + Python scripting documentation Dokumentasi scripting python - + Python scripting documentation on the FreeCAD website Dokumentasi skrip Python di situs FreeCAD - + PowerUsers documentation Dokumentasi PowerUsers @@ -9974,13 +9845,13 @@ the current copy will be lost. StdCmdFreeCADUserHub - - + + Users documentation Dokumentasi pengguna - + Documentation for users on the FreeCAD website Dokumentasi untuk pengguna di situs FreeCAD @@ -9988,13 +9859,13 @@ the current copy will be lost. StdCmdFreeCADWebsite - - + + FreeCAD Website Situs FreeCAD - + The FreeCAD website Situs FreeCAD @@ -10002,13 +9873,13 @@ the current copy will be lost. StdCmdFreezeViews - + Freeze display Layar beku - + Freezes the current view position Membekukan posisi tampilan saat ini @@ -10029,13 +9900,13 @@ the current copy will be lost. StdCmdHideObjects - + Hide all objects Sembunyikan semua benda - - + + Hide all objects in the document Sembunyikan semua objek dalam dokumen @@ -10043,13 +9914,13 @@ the current copy will be lost. StdCmdHideSelection - + Hide selection Sembunyikan pilihan - - + + Hide all selected objects Sembunyikan semua objek yang dipilih @@ -10057,23 +9928,23 @@ the current copy will be lost. StdCmdImport - + &Import... &Impor... - - + + Import a file in the active document Impor file dalam dokumen aktif - + Supported formats Format yang didukung - + All files (*.*) Semua data (*.*) @@ -10311,9 +10182,9 @@ the current copy will be lost. StdCmdMeasureDistance - - - + + + Measure distance Ukur jarak @@ -10321,13 +10192,13 @@ the current copy will be lost. StdCmdMeasurementSimple - + Measure distance Ukur jarak - - + + Measures distance between two selected objects Mengukur jarak antara dua objek yang dipilih @@ -10335,25 +10206,25 @@ the current copy will be lost. StdCmdMergeProjects - + Merge project... Gabung proyek... - - - - + + + + Merge project Gabung proyek - + %1 document (*.FCStd) % 1 dokumen (*.FCStd) - + Cannot merge project with itself. Tidak bisa menggabungkan proyek dengan dirinya sendiri. @@ -10361,19 +10232,19 @@ the current copy will be lost. StdCmdNew - + &New &Baru - - + + Create a new empty document Buat dokumen kosong baru - - + + Unnamed Tanpa nama @@ -10381,13 +10252,13 @@ the current copy will be lost. StdCmdOnlineHelp - - + + Help Bantuan - + Show help to the application Tampilkan bantuan ke aplikasi @@ -10395,13 +10266,13 @@ the current copy will be lost. StdCmdOnlineHelpWebsite - - + + Help Website Bantuan Website - + The website where the help is maintained Situs web di mana bantuan dipertahankan @@ -10456,13 +10327,13 @@ the current copy will be lost. StdCmdPaste - + &Paste &Pasta - - + + Paste operation Tempel operasi @@ -10470,13 +10341,13 @@ the current copy will be lost. StdCmdPlacement - + Placement... Penempatan... - - + + Place the selected objects Tempatkan objek yang dipilih @@ -10484,13 +10355,13 @@ the current copy will be lost. StdCmdPrint - + &Print... &Mencetak... - - + + Print the document Cetak dokumen @@ -10498,13 +10369,13 @@ the current copy will be lost. StdCmdPrintPdf - + &Export PDF... & Ekspor PDF... - - + + Export the document as PDF Ekspor dokumen sebagai PDF @@ -10512,17 +10383,17 @@ the current copy will be lost. StdCmdPrintPreview - + &Print preview... &Pratinjau Print... - + Print the document Cetak dokumen - + Print preview Pratinjau Print @@ -10530,13 +10401,13 @@ the current copy will be lost. StdCmdProjectInfo - + Project i&nformation... Informasi Proyek... - - + + Show details of the currently active project Tampilkan rincian proyek yang sedang aktif @@ -10544,13 +10415,13 @@ the current copy will be lost. StdCmdProjectUtil - + Project utility... Utilitas proyek... - - + + Utility to extract or create project files Utilitas untuk mengekstrak atau membuat file proyek @@ -10558,13 +10429,13 @@ the current copy will be lost. StdCmdPythonWebsite - - + + Python Website Situs Python - + The official Python website Situs resmi Python @@ -10572,13 +10443,13 @@ the current copy will be lost. StdCmdQuit - + E&xit Keluar - - + + Quits the application Keluar dari aplikasi @@ -10596,13 +10467,13 @@ the current copy will be lost. StdCmdRecentFiles - + Recent files File terbaru - + Recent file list Daftar file terbaru @@ -10610,13 +10481,13 @@ the current copy will be lost. StdCmdRecentMacros - + Recent macros Recent macros - + Recent macro list Recent macro list @@ -10624,13 +10495,13 @@ the current copy will be lost. StdCmdRedo - + &Redo &Mengulangi - - + + Redoes a previously undone action Mengalahkan tindakan yang sebelumnya dibatalkan @@ -10638,13 +10509,13 @@ the current copy will be lost. StdCmdRefresh - + &Refresh &Menyegarkan - - + + Recomputes the current active document Menghitung ulang dokumen aktif saat ini @@ -10652,13 +10523,13 @@ the current copy will be lost. StdCmdReportBug - + Report a bug Report a bug - - + + Report a bug or suggest a feature Report a bug or suggest a feature @@ -10666,13 +10537,13 @@ the current copy will be lost. StdCmdRevert - + Revert Kembali - - + + Reverts to the saved version of this file Kembali ke versi tersimpan dari file ini @@ -10680,13 +10551,13 @@ the current copy will be lost. StdCmdSave - + &Save &Menyimpan - - + + Save the active document Simpan dokumen aktif @@ -10694,13 +10565,13 @@ the current copy will be lost. StdCmdSaveAll - + Save All Save All - - + + Save all opened document Save all opened document @@ -10708,13 +10579,13 @@ the current copy will be lost. StdCmdSaveAs - + Save &As... Simpan & Sebagai... - - + + Save the active document under a new file name Simpan dokumen aktif dengan nama file baru @@ -10722,13 +10593,13 @@ the current copy will be lost. StdCmdSaveCopy - + Save a &Copy... Simpan salinan... - - + + Save a copy of the active document under a new file name Simpan salinan dokumen aktif dengan nama file baru @@ -10736,13 +10607,13 @@ the current copy will be lost. StdCmdSceneInspector - + Scene inspector... Inspektur pemandangan... - - + + Scene inspector Inspektur pemandangan @@ -10750,13 +10621,13 @@ the current copy will be lost. StdCmdSelBack - + &Back &Back - - + + Go back to previous selection Go back to previous selection @@ -10764,13 +10635,13 @@ the current copy will be lost. StdCmdSelBoundingBox - + &Bounding box &Bounding box - - + + Show selection bounding box Show selection bounding box @@ -10778,13 +10649,13 @@ the current copy will be lost. StdCmdSelForward - + &Forward &Forward - - + + Repeat the backed selection Repeat the backed selection @@ -10792,13 +10663,13 @@ the current copy will be lost. StdCmdSelectAll - + Select &All Pilih Semua - - + + Select all Pilih Semua @@ -10806,13 +10677,13 @@ the current copy will be lost. StdCmdSelectVisibleObjects - + Select visible objects Pilih objek yang terlihat - - + + Select visible objects in the active document Pilih objek yang terlihat dalam dokumen aktif @@ -10834,13 +10705,13 @@ the current copy will be lost. StdCmdSetAppearance - + Appearance... Penampilan... - + Sets the display properties of the selected object Mengatur properti tampilan dari objek yang dipilih @@ -10848,13 +10719,13 @@ the current copy will be lost. StdCmdShowObjects - + Show all objects Tampilkan semua benda - - + + Show all objects in the document Tampilkan semua objek dalam dokumen @@ -10862,13 +10733,13 @@ the current copy will be lost. StdCmdShowSelection - + Show selection Tampilkan pilihan - - + + Show all selected objects Tampilkan semua objek yang dipilih @@ -10876,13 +10747,13 @@ the current copy will be lost. StdCmdStatusBar - + Status bar Bilah status - - + + Toggles the status bar Mengaktifkan status bar @@ -10890,13 +10761,13 @@ the current copy will be lost. StdCmdTextDocument - + Add text document Add text document - - + + Add text document to active document Add text document to active document @@ -10904,13 +10775,13 @@ the current copy will be lost. StdCmdTextureMapping - + Texture mapping... Pemetaan tekstur... - - + + Texture mapping Pemetaan tekstur @@ -10918,13 +10789,13 @@ the current copy will be lost. StdCmdTileWindows - + &Tile &Ubin - - + + Tile the windows Tile jendela @@ -10942,13 +10813,13 @@ the current copy will be lost. StdCmdToggleClipPlane - + Clipping plane Kliping pesawat - + Toggles clipping plane for active view Toggles clipping plane untuk tampilan aktif @@ -10956,13 +10827,13 @@ the current copy will be lost. StdCmdToggleNavigation - + Toggle navigation/Edit mode Toggle navigation / Edit mode - - + + Toggle between navigation and edit mode Beralih antara mode navigasi dan edit @@ -10970,13 +10841,13 @@ the current copy will be lost. StdCmdToggleObjects - + Toggle all objects Toggle semua benda - - + + Toggles visibility of all objects in the active document Matikan visibilitas semua objek dalam dokumen aktif @@ -10984,13 +10855,13 @@ the current copy will be lost. StdCmdToggleSelectability - + Toggle selectability Toggle selectability - - + + Toggles the property of the objects to get selected in the 3D-View Toggles properti dari objek yang akan dipilih dalam 3D-View @@ -10998,13 +10869,13 @@ the current copy will be lost. StdCmdToggleVisibility - + Toggle visibility Toggle visibility - - + + Toggles visibility Matikan visibilitas @@ -11012,13 +10883,13 @@ the current copy will be lost. StdCmdToolBarMenu - + Tool&bars Tool & bar - - + + Toggles this window Matikan jendela ini @@ -11026,13 +10897,13 @@ the current copy will be lost. StdCmdTransform - + Transform... Mengubah... - - + + Transform the geometry of selected objects Transform geometri dari objek yang dipilih @@ -11040,13 +10911,13 @@ the current copy will be lost. StdCmdTransformManip - + Transform Transform - - + + Transform the selected object in the 3d view Mengubah dipilih objek di 3d tampilan @@ -11054,13 +10925,13 @@ the current copy will be lost. StdCmdTreeCollapse - + Collapse selected item Collapse selected item - - + + Collapse currently selected tree items Collapse currently selected tree items @@ -11068,13 +10939,13 @@ the current copy will be lost. StdCmdTreeExpand - + Expand selected item Expand selected item - - + + Expand currently selected tree items Expand currently selected tree items @@ -11082,13 +10953,13 @@ the current copy will be lost. StdCmdTreeSelectAllInstances - + Select all instances Select all instances - - + + Select all instances of the current selected object Select all instances of the current selected object @@ -11096,13 +10967,13 @@ the current copy will be lost. StdCmdTreeViewActions - + TreeView actions TreeView actions - - + + TreeView behavior options and actions TreeView behavior options and actions @@ -11110,13 +10981,13 @@ the current copy will be lost. StdCmdUndo - + &Undo &Membuka - - + + Undo exactly one action Urungkan tepat satu tindakan @@ -11124,13 +10995,13 @@ the current copy will be lost. StdCmdUnitsCalculator - + &Units calculator... & Unit kalkulator... - - + + Start the units calculator Mulai kalkulator unit @@ -11138,13 +11009,13 @@ the current copy will be lost. StdCmdUserEditMode - + Edit mode Edit mode - - + + Defines behavior when editing an object from tree Defines behavior when editing an object from tree @@ -11152,13 +11023,13 @@ the current copy will be lost. StdCmdUserInterface - + Dock views Tampilan dermaga - - + + Dock all top-level views Dock semua tampilan tingkat atas @@ -11166,13 +11037,13 @@ the current copy will be lost. StdCmdViewBottom - + Bottom Bawah - + Set to bottom view Atur ke tampilan bawah @@ -11180,13 +11051,13 @@ the current copy will be lost. StdCmdViewCreate - + Create new view Buat tampilan baru - - + + Creates a new view window for the active document Creates a new view window for the active document @@ -11194,13 +11065,13 @@ the current copy will be lost. StdCmdViewDimetric - + Dimetric Dimetrik - + Set to dimetric view Set to dimetric view @@ -11208,13 +11079,13 @@ the current copy will be lost. StdCmdViewExample1 - + Inventor example #1 Contoh inventaris # 1 - - + + Shows a 3D texture with manipulator Menunjukkan tekstur 3D dengan manipulator @@ -11222,13 +11093,13 @@ the current copy will be lost. StdCmdViewExample2 - + Inventor example #2 Contoh inventor # 2 - - + + Shows spheres and drag-lights Menampilkan bola dan lampu seret @@ -11236,13 +11107,13 @@ the current copy will be lost. StdCmdViewExample3 - + Inventor example #3 Contoh inventaris # 3 - - + + Shows a animated texture Menunjukkan tekstur animasi @@ -11250,13 +11121,13 @@ the current copy will be lost. StdCmdViewFitAll - + Fit all Cocokkan semua - + Fits the whole content on the screen Cocokkan keseluruhan konten di layar @@ -11264,13 +11135,13 @@ the current copy will be lost. StdCmdViewFitSelection - + Fit selection Pilihan pas - + Fits the selected content on the screen Cocok dengan konten yang dipilih di layar @@ -11278,13 +11149,13 @@ the current copy will be lost. StdCmdViewFront - + Front Depan - + Set to front view Atur ke tampilan depan @@ -11292,13 +11163,13 @@ the current copy will be lost. StdCmdViewHome - + Home Beranda - + Set to default home view Set to default home view @@ -11306,13 +11177,13 @@ the current copy will be lost. StdCmdViewIsometric - + Isometric Isometrik - + Set to isometric view Set to isometric view @@ -11320,13 +11191,13 @@ the current copy will be lost. StdCmdViewIvIssueCamPos - + Issue camera position Masalah posisi kamera - - + + Issue the camera position to the console and to a macro, to easily recall this position Masalahkan posisi kamera ke konsol dan ke makro, dengan mudah mengingat posisi ini @@ -11334,13 +11205,13 @@ the current copy will be lost. StdCmdViewIvStereoInterleavedColumns - + Stereo Interleaved Columns Kolom Interleaved Stereo - - + + Switch stereo viewing to Interleaved Columns Berpindah tampilan stereo ke Interleaved Columns @@ -11348,13 +11219,13 @@ the current copy will be lost. StdCmdViewIvStereoInterleavedRows - + Stereo Interleaved Rows Rangkaian Interleaved Stereo - - + + Switch stereo viewing to Interleaved Rows Berpindah tampilan stereo ke Interleaved Rows @@ -11362,13 +11233,13 @@ the current copy will be lost. StdCmdViewIvStereoOff - + Stereo Off Stereo Nonaktif - - + + Switch stereo viewing off Matikan tampilan stereo @@ -11376,13 +11247,13 @@ the current copy will be lost. StdCmdViewIvStereoQuadBuff - + Stereo quad buffer Stereo quad buffer - - + + Switch stereo viewing to quad buffer Berpindah tampilan stereo ke quad buffer @@ -11390,13 +11261,13 @@ the current copy will be lost. StdCmdViewIvStereoRedGreen - + Stereo red/cyan Stereo merah / cyan - - + + Switch stereo viewing to red/cyan Beralih tampilan stereo ke merah / cyan @@ -11404,13 +11275,13 @@ the current copy will be lost. StdCmdViewLeft - + Left Kiri - + Set to left view Atur ke tampilan kiri @@ -11418,13 +11289,13 @@ the current copy will be lost. StdCmdViewRear - + Rear Belakang - + Set to rear view Atur ke tampilan belakang @@ -11432,13 +11303,13 @@ the current copy will be lost. StdCmdViewRestoreCamera - + Restore saved camera Restore saved camera - - + + Restore saved camera settings Restore saved camera settings @@ -11446,13 +11317,13 @@ the current copy will be lost. StdCmdViewRight - + Right Kanan - + Set to right view Atur ke tampilan kanan @@ -11460,13 +11331,13 @@ the current copy will be lost. StdCmdViewRotateLeft - + Rotate Left Putar Kiri - + Rotate the view by 90° counter-clockwise Rotate the view by 90° counter-clockwise @@ -11474,13 +11345,13 @@ the current copy will be lost. StdCmdViewRotateRight - + Rotate Right Putar ke kanan - + Rotate the view by 90° clockwise Rotate the view by 90° clockwise @@ -11488,13 +11359,13 @@ the current copy will be lost. StdCmdViewSaveCamera - + Save current camera Save current camera - - + + Save current camera settings Save current camera settings @@ -11502,13 +11373,13 @@ the current copy will be lost. StdCmdViewTop - + Top Puncak - + Set to top view Atur ke tampilan atas @@ -11516,13 +11387,13 @@ the current copy will be lost. StdCmdViewTrimetric - + Trimetric Trimetrik - + Set to trimetric view Set to trimetric view @@ -11530,13 +11401,13 @@ the current copy will be lost. StdCmdViewVR - + FreeCAD-VR FreeCAD-VR - + Extend the FreeCAD 3D Window to a Oculus Rift Perluas FreeCAD 3D Window ke Oculus Rift @@ -11544,13 +11415,13 @@ the current copy will be lost. StdCmdWhatsThis - + &What's This? &Apa ini? - - + + What's This Apa ini @@ -11558,13 +11429,13 @@ the current copy will be lost. StdCmdWindows - + &Windows... & Windows... - - + + Windows list Daftar Windows @@ -11572,9 +11443,9 @@ the current copy will be lost. StdCmdWindowsMenu - - - + + + Activates this window Aktifkan jendela ini @@ -11582,13 +11453,13 @@ the current copy will be lost. StdCmdWorkbench - + Workbench Meja kerja - + Switch between workbenches Beralih di antara meja kerja @@ -11596,13 +11467,13 @@ the current copy will be lost. StdMainFullscreen - + Fullscreen Layar penuh - + Display the main window in fullscreen mode Tampilkan jendela utama dalam mode fullscreen @@ -11610,13 +11481,13 @@ the current copy will be lost. StdOrthographicCamera - + Orthographic view Tampilan orthographic - + Switches to orthographic view mode Beralih ke mode tampilan ortografi @@ -11624,13 +11495,13 @@ the current copy will be lost. StdPerspectiveCamera - + Perspective view Perspektif tampilan - + Switches to perspective view mode Beralih ke mode tampilan perspektif @@ -11638,13 +11509,13 @@ the current copy will be lost. StdRecallWorkingView - + Recall working view Recall working view - - + + Recall previously stored temporary working view Recall previously stored temporary working view @@ -11652,13 +11523,13 @@ the current copy will be lost. StdStoreWorkingView - + Store working view Store working view - - + + Store a document-specific temporary working view Store a document-specific temporary working view @@ -11666,13 +11537,13 @@ the current copy will be lost. StdTreeCollapseDocument - + Collapse/Expand Ciutkan/Perluas - - + + Expand active document and collapse all others Perluas dokumen aktif dan ciutkan yang lainnya @@ -11680,12 +11551,12 @@ the current copy will be lost. StdTreeDrag - + Initiate dragging Initiate dragging - + Initiate dragging of current selected tree items Initiate dragging of current selected tree items @@ -11693,13 +11564,13 @@ the current copy will be lost. StdTreeMultiDocument - + Multi document Multi document - - + + Display all documents in the tree view Display all documents in the tree view @@ -11707,12 +11578,12 @@ the current copy will be lost. StdTreePreSelection - + Pre-selection Pre-selection - + Preselect the object in 3D view when mouse over the tree item Preselect the object in 3D view when mouse over the tree item @@ -11720,12 +11591,12 @@ the current copy will be lost. StdTreeRecordSelection - + Record selection Record selection - + Record selection in tree view in order to go back/forward using navigation button Record selection in tree view in order to go back/forward using navigation button @@ -11733,13 +11604,13 @@ the current copy will be lost. StdTreeSelection - + Go to selection Pergi ke seleksi - - + + Scroll to first selected item Gulir ke item yang dipilih pertama @@ -11747,13 +11618,13 @@ the current copy will be lost. StdTreeSingleDocument - + Single document Dokumen tunggal - - + + Only display the active document in the tree view Only display the active document in the tree view @@ -11761,12 +11632,12 @@ the current copy will be lost. StdTreeSyncPlacement - + Sync placement Selaraskan penempatan - + Auto adjust placement on drag and drop objects across coordinate systems Auto adjust placement on drag and drop objects across coordinate systems @@ -11774,12 +11645,12 @@ the current copy will be lost. StdTreeSyncSelection - + Sync selection Sync selection - + Auto expand tree item when the corresponding object is selected in 3D view Auto expand tree item when the corresponding object is selected in 3D view @@ -11787,12 +11658,12 @@ the current copy will be lost. StdTreeSyncView - + Sync view Sync view - + Auto switch to the 3D view containing the selected item Auto switch to the 3D view containing the selected item @@ -11800,9 +11671,9 @@ the current copy will be lost. StdViewBoxZoom - - - + + + Box zoom Kotak zoom @@ -11810,13 +11681,13 @@ the current copy will be lost. StdViewDock - + Docked Docked - + Display the active view either in fullscreen, in undocked or docked mode Menampilkan aktif pandangan baik di layar penuh, dalam mode undocked atau berlabuh @@ -11824,13 +11695,13 @@ the current copy will be lost. StdViewDockUndockFullscreen - + Document window Jendela dokumen - + Display the active view either in fullscreen, in undocked or docked mode Menampilkan aktif pandangan baik di layar penuh, dalam mode undocked atau berlabuh @@ -11838,13 +11709,13 @@ the current copy will be lost. StdViewFullscreen - + Fullscreen Layar penuh - + Display the active view either in fullscreen, in undocked or docked mode Menampilkan aktif pandangan baik di layar penuh, dalam mode undocked atau berlabuh @@ -11852,13 +11723,13 @@ the current copy will be lost. StdViewScreenShot - - Save picture... - Simpan gambar... + + Save image... + Save image... - + Creates a screenshot of the active view Membuat tangkapan layar tampilan aktif @@ -11866,13 +11737,13 @@ the current copy will be lost. StdViewUndock - + Undocked Undocked - + Display the active view either in fullscreen, in undocked or docked mode Menampilkan aktif pandangan baik di layar penuh, dalam mode undocked atau berlabuh @@ -11880,9 +11751,9 @@ the current copy will be lost. StdViewZoomIn - - - + + + Zoom In Perbesar @@ -11890,9 +11761,9 @@ the current copy will be lost. StdViewZoomOut - - - + + + Zoom Out Zoom Out @@ -11900,7 +11771,7 @@ the current copy will be lost. Std_Delete - + The following referencing objects might break. Are you sure you want to continue? @@ -11911,7 +11782,7 @@ Are you sure you want to continue? - + Object dependencies Objek dependensi @@ -11919,7 +11790,7 @@ Are you sure you want to continue? Std_DependencyGraph - + Dependency graph Grafik ketergantungan @@ -11927,72 +11798,72 @@ Are you sure you want to continue? Std_DrawStyle - + As is Dengan adanya - + Normal mode Mode normal - + Points Poin - + Points mode Mode poin - + Wireframe Bingkai kawat - + Wireframe mode Mode wireframe - + Hidden line Garis tersembunyi - + Hidden line mode Mode garis tersembunyi - + No shading Tidak ada bayangan - + No shading mode Tidak ada mode shading - + Shaded Berbayang - + Shaded mode Mode berbayang - + Flat lines Garis datar - + Flat lines mode Mode garis datar @@ -12000,12 +11871,12 @@ Are you sure you want to continue? Std_DuplicateSelection - + Object dependencies Objek dependensi - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -12023,7 +11894,7 @@ Do you want to save the document now? Std_Refresh - + The document contains dependency cycles. Please check the Report View for more details. @@ -12037,17 +11908,17 @@ Do you still want to proceed? Std_Revert - + Revert document Kembalikan dokumen - + This will discard all the changes since last file save. Ini akan membuang semua perubahan sejak penyimpanan file terakhir. - + Do you want to continue? Apakah Anda ingin melanjutkan? @@ -12056,8 +11927,8 @@ Do you still want to proceed? TreeParams - Tree view item background. Only effecitve in overlay. - Tree view item background. Only effecitve in overlay. + Tree view item background. Only effective in overlay. + Tree view item background. Only effective in overlay. @@ -12071,29 +11942,29 @@ Do you still want to proceed? - Hide tree view scroll bar in dock overlay - Hide tree view scroll bar in dock overlay + Hide tree view scroll bar in dock overlay. + Hide tree view scroll bar in dock overlay. - Hide tree view header view in dock overlay - Hide tree view header view in dock overlay + Hide tree view header view in dock overlay. + Hide tree view header view in dock overlay. - Allow tree view columns to be manually resized - Allow tree view columns to be manually resized + Allow tree view columns to be manually resized. + Allow tree view columns to be manually resized. ViewIsometricCmd - + Isometric Isometrik - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12101,12 +11972,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortografis - + Set View to Orthographic mode Set View to Orthographic mode @@ -12114,12 +11985,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspektif - + Set View to Perspective mode Set View to Perspective mode @@ -12127,12 +11998,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view @@ -12151,83 +12022,673 @@ Do you still want to proceed? + Edit + Edit + + + + Clipboard + Clipboard + + + + Workbench + Meja kerja + + + + Structure + Struktur + + + Standard views Tampilan standar - + Axonometric Axonometrik - + &Stereo &Stereo - + &Zoom & Zoom - + Visibility Visibilitas - + &View &Melihat - + &Tools & Alat - + &Macro & Makro - + &Windows & Windows - + &On-line help & Bantuan on-line - + &Help &Membantu - + + Help + Bantuan + + + File Mengajukan - + Macro Makro - + View Tampilan - + Special Ops Pasukan khusus - + Link actions Link actions + + Gui::MDIView + + + Export PDF + Ekspor PDF + + + + PDF file + File PDF + + + + Gui::Dialog::DlgSettingsNotificationArea + + + + Notification Area + Notification Area + + + + Settings + Setelan + + + + The Notification area will appear in the status bar + The Notification area will appear in the status bar + + + + Enable Notification Area + Enable Notification Area + + + + Non-intrusive notifications will appear next to the notification area in the status bar + Non-intrusive notifications will appear next to the notification area in the status bar + + + + Enable non-intrusive notifications + Enable non-intrusive notifications + + + + Additional data Sources + Additional data Sources + + + + Errors will appear in the notification area + Errors will appear in the notification area + + + + Errors + Galat + + + + Warnings will appear in the notification area + Warnings will appear in the notification area + + + + Warnings + Peringatan + + + + Non-Intrusive Notifications + Non-Intrusive Notifications + + + + Minimum Duration: + Minimum Duration: + + + + Maximum Duration: + Maximum Duration: + + + + Duration during which the notification will be shown (unless mouse buttons are clicked) + Duration during which the notification will be shown (unless mouse buttons are clicked) + + + + + s + s + + + + Minimum duration during which the notification will be shown (unless notification clicked) + Minimum duration during which the notification will be shown (unless notification clicked) + + + + Maximum Number of Notifications: + Maximum Number of Notifications: + + + + Maximum number of notifications that will be simultaneously present on the screen + Maximum number of notifications that will be simultaneously present on the screen + + + + Notification width: + Notification width: + + + + Width of the notification in pixels + Width of the notification in pixels + + + + Any open non-intrusive notifications will disappear when another window is activated + Any open non-intrusive notifications will disappear when another window is activated + + + + Hide when other window is activated + Hide when other window is activated + + + + Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + + + + Do not show when inactive + Do not show when inactive + + + + Message List + Message List + + + + Limit the number of messages that will be kept in the list. If 0 there is no limit. + Limit the number of messages that will be kept in the list. If 0 there is no limit. + + + + Maximum Messages (0 = no limit): + Maximum Messages (0 = no limit): + + + + Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + + + + Auto-remove User Notifications + Auto-remove User Notifications + + + + Activation of the Notification Area only takes effect after an application restart. + Activation of the Notification Area only takes effect after an application restart. + + + + Gui::Dialog::DlgSettingsWorkbenches + + + Available Workbenches + Available Workbenches + + + + <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> +Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> +Currently, your system has the following workbenches:</p></body></html> + + + + Start up workbench: + Start up workbench: + + + + Choose which workbench will be activated and shown +after FreeCAD launches + Choose which workbench will be activated and shown +after FreeCAD launches + + + + Workbench selector position : + Workbench selector position : + + + + Customize where the workbench selector appears (restart required). + +'Toolbar': In the toolbars, as a movable toolbar. +'Left Corner': In the menu bar, on the left corner. +'Right Corner': In the menu bar, on the right corner. + Customize where the workbench selector appears (restart required). + +'Toolbar': In the toolbars, as a movable toolbar. +'Left Corner': In the menu bar, on the left corner. +'Right Corner': In the menu bar, on the right corner. + + + + If checked, application will remember which workbench is active for each tab of the viewport + If checked, application will remember which workbench is active for each tab of the viewport + + + + Remember active workbench by tab + Remember active workbench by tab + + + + Gui::TaskOrientation + + + Choose orientation + Choose orientation + + + + Planes + Planes + + + + XY-Plane + XY-Plane + + + + XZ-Plane + XZ-Plane + + + + YZ-Plane + YZ-Plane + + + + Reverse direction + Reverse direction + + + + Offset: + Offset: + + + + Gui::TaskImage + + + Image plane settings + Image plane settings + + + + Planes + Planes + + + + XY-Plane + XY-Plane + + + + XZ-Plane + XZ-Plane + + + + YZ-Plane + YZ-Plane + + + + Reverse direction + Reverse direction + + + + Offset: + Offset: + + + + X distance: + X distance: + + + + Y distance: + Y distance: + + + + Rotation : + Rotation : + + + + Transparency : + Transparency : + + + + Image size + Image size + + + + Width: + Lebar: + + + + Height: + Tinggi: + + + + Keep aspect ratio + Keep aspect ratio + + + + Interactively scale the image by setting a length between two points of the image. + Interactively scale the image by setting a length between two points of the image. + + + + Calibrate + Kalibrasi + + + + Calibration + Calibration + + + + Apply + Apply + + + + Cancel + Membatalkan + + + + SoFCColorGradient + + + Color Gradient + Color Gradient + + + + Gui::Dialog::wbListItem + + + If unchecked, %1 will not appear in the available workbenches. + If unchecked, %1 will not appear in the available workbenches. + + + + This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + + + + Shortcut to activate this workbench. + Shortcut to activate this workbench. + + + + Auto-load + Auto-load + + + + If checked, %1 will be loaded automatically when FreeCAD starts up + If checked, %1 will be loaded automatically when FreeCAD starts up + + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + + Loaded + Loaded + + + + Load + Muat + + + + To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + + + + Gui::Dialog::DlgSettingsWorkbenchesImp + + + Toolbar + Bilah alat + + + + Left corner + Left corner + + + + Right corner + Right corner + + + + SoFCColorLegend + + + Color Legend + Color Legend + + + + NotificationsAction + + + Delete + Menghapus + + + + Delete user notifications + Delete user notifications + + + + Delete All + Delete All + + + + Gui::NotificationArea + + + Delete user notifications + Delete user notifications + + + + Delete All + Delete All + + + + Gui::ImageView + + + Failed to load image file + Failed to load image file + + + + Cannot load file %1: %2 + Cannot load file %1: %2 + + + + Fit to window + Fit to window + + + + Zoom in + Memperbesar + + + + Zoom out + Perkecil + + + + StdViewLoadImage + + + Load image... + Load image... + + + + + Loads an image + Loads an image + + + + NaviCubeImplementation + + + FRONT + FRONT + + + + REAR + REAR + + + + TOP + TOP + + + + BOTTOM + BOTTOM + + + + RIGHT + RIGHT + + + + LEFT + LEFT + + + + Gui::InteractiveScale + + + Enter desired distance between the points + Enter desired distance between the points + + diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index b0abbfd341..eaaf3d824f 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Modifica immagine @@ -1998,12 +1998,12 @@ punto verrà sempre stampato. Language and number format - Language and number format + Lingua e formato numerico Language: - Language: + Lingua: @@ -2853,7 +2853,7 @@ Specificare un'altra cartella. Restart required - Restart required + Riavvio richiesto @@ -3029,12 +3029,12 @@ Specificare un'altra cartella. Failed to extract project - Failed to extract project + Impossibile estrarre il progetto Failed to create project - Failed to create project + Impossibile creare il progetto @@ -3776,7 +3776,7 @@ del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. Color gradient is used with its full color range - Il gradiente di colore è usato con la sua gamma di colori completa + La sfumatura di colore è usata con la sua gamma di colori completa @@ -3791,7 +3791,7 @@ del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. Color gradient starts from the zero value - Il gradiente del colore inizia dal valore zero + La sfumatura del colore inizia dal valore zero @@ -5089,12 +5089,12 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Gradiente lineare Radial gradient - Radial gradient + Sfumatura radiale @@ -6211,7 +6211,7 @@ originariamente selezionati prima di aprire questa finestra Critical messages - Critical messages + Messaggi critici @@ -8011,12 +8011,12 @@ Vuoi specificare un'altra cartella? Show items hidden in tree view - Show items hidden in tree view + Mostra gli elementi nascosti nella vista ad albero Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Mostra gli elementi contrassegnati come 'nascosti' nella vista ad albero @@ -8665,7 +8665,7 @@ Vuoi continuare? Save image - Save image + Salva immagine @@ -8788,7 +8788,7 @@ Vuoi continuare? Message - Message + Messaggio @@ -9357,7 +9357,7 @@ la copia corrente andranno perse. Change image... - Change image... + Cambia immagine... @@ -11741,7 +11741,7 @@ la copia corrente andranno perse. Save image... - Save image... + Salva immagine... @@ -12161,7 +12161,7 @@ Si desidera ancora procedere? Notification Area - Notification Area + Area di Notifica @@ -12171,17 +12171,17 @@ Si desidera ancora procedere? The Notification area will appear in the status bar - The Notification area will appear in the status bar + L'area di Notifica apparirà nella barra di stato Enable Notification Area - Enable Notification Area + Abilita area di Notifica Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Le notifiche non intrusive appariranno accanto all'area di notifica nella barra di stato @@ -12282,7 +12282,7 @@ Si desidera ancora procedere? Do not show when inactive - Do not show when inactive + Non mostrare quando inattivo @@ -12458,17 +12458,17 @@ dopo l'avvio di FreeCAD Rotation : - Rotation : + Rotazione : Transparency : - Transparency : + Trasparenza : Image size - Image size + Dimensione immagine @@ -12498,7 +12498,7 @@ dopo l'avvio di FreeCAD Calibration - Calibration + Calibrazione @@ -12516,7 +12516,7 @@ dopo l'avvio di FreeCAD Color Gradient - Color Gradient + Sfumatura Colore diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index f86d1cb957..dbd77a5c91 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -2943,7 +2943,7 @@ Specify another directory, please. &Comment: - &コメント: + コメント(&C): diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index a0f1d8af32..c06fc0199e 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -216,7 +216,7 @@ Edit image - Edit image + გამოსახულების ჩასწორება @@ -1239,7 +1239,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + მიმდინარე მალსახმობის შესაცვლელად ქვემო ველში შეიყვანეთ ახალი მალსახმობი და 'მინიჭებას' დააწექით. @@ -2000,12 +2000,12 @@ dot/period will always be printed. Language and number format - Language and number format + ენის და რიცხვის ფორმატი Language: - Language: + ენა: @@ -2015,7 +2015,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + საზომი ერთეულები, რომელიც უნდა იყოს გამოყენებული აპლიკაციის ყველა ნაწილისთვის @@ -2040,7 +2040,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + წილადის გამყოფის შეცვლა @@ -2085,14 +2085,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + უკანასკნელად გახსნილი ფაილების სიის ზომა: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + მთავარი ფანჯრის ფონი (როცა დოკუმენტები გახსნილი არაა) სპეციალური გამოსახულების ფილებისგან შედგება. +სურათის შესახებ დეტალებისთვის იხილეთ FreeCAD Wiki. @@ -2853,7 +2853,7 @@ Specify another directory, please. Restart required - Restart required + საჭიროა გადატვირთვა @@ -3029,12 +3029,12 @@ Specify another directory, please. Failed to extract project - Failed to extract project + პროექტის გაშლის შეცდომა Failed to create project - Failed to create project + პროექტის შექმნის შეცდომა @@ -4987,8 +4987,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + ზონა ელემენტების არჩევისთვის 3D ხედში. +მნიშვნელობის გაზრდა აადვილებს ნივთების მონიშვნას, მაგრამ შეუძლია შეუძლებელი გახადოს მცირე ელემენტების მონიშვნა. @@ -5079,24 +5079,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + წრფივი გრადიენტი Radial gradient - Radial gradient + რადიალური გრადიენტი Top: - Top: + თავზე: Middle: - Middle: + შუა: @@ -5122,7 +5122,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + ძირზე: @@ -5152,17 +5152,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + ცენტრალური: Midway: - Midway: + შუაში: End: - End: + ბოლო: @@ -6203,7 +6203,7 @@ originally selected prior to opening this dialog Critical messages - Critical messages + კრიტიკული შეტყობინებები @@ -8004,22 +8004,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + ხის ხედში დამალული ელემენტების ჩვენება Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + ხის ხედში 'დამალულად' მონიშნული ელემენტების ჩვენება Toggle visibility in tree view - Toggle visibility in tree view + ხის ხედში ხილვადობის გადართვა Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + ხის ხედში მონიშნული ელემენტების ხილვადობის გადართვა @@ -8658,7 +8658,7 @@ Do you want to continue? Save image - Save image + სურათის შენახვა @@ -8775,18 +8775,18 @@ Do you want to continue? Notifier - Notifier + გამფრთხილებელი Message - Message + შეტყობინება Notifier: - Notifier: + გამფრთხილებელი: @@ -8801,7 +8801,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + ძალიან ბევრი გახსნილი არაშემაწუხებელი გაფრთხილება. გაფრთხილებებს გამოვტოვებთ! @@ -9349,7 +9349,7 @@ the current copy will be lost. Change image... - Change image... + გამოსახულების შეცვლა... @@ -11733,7 +11733,7 @@ the current copy will be lost. Save image... - Save image... + გამოსახულების შენახვა... @@ -12036,7 +12036,7 @@ Do you still want to proceed? Clipboard - Clipboard + ბუფერი @@ -12153,7 +12153,7 @@ Do you still want to proceed? Notification Area - Notification Area + შეტყობინებების ადგილი @@ -12163,32 +12163,32 @@ Do you still want to proceed? The Notification area will appear in the status bar - The Notification area will appear in the status bar + შეტყობინებების ადგილი სტატუსის სტრიქონში გამოჩნდება Enable Notification Area - Enable Notification Area + შეტყობინებების ადგილის ჩართვა Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + არაშემაწუხებელი გაფრთხილებები გაფრთხილების ადგილის ახლოს გამოჩნდებიან, სტატუსის სტრიქონში Enable non-intrusive notifications - Enable non-intrusive notifications + არა-შემაწუხებელი შეტყობინებების ჩართვა Additional data Sources - Additional data Sources + დამატებითი მონაცემის წყაროები Errors will appear in the notification area - Errors will appear in the notification area + შეცდომები შეტყობინების ადგილზე გამოჩნდება @@ -12198,7 +12198,7 @@ Do you still want to proceed? Warnings will appear in the notification area - Warnings will appear in the notification area + გაფრთხილებები შეტყობინების ადგილზე გამოჩნდება @@ -12208,22 +12208,22 @@ Do you still want to proceed? Non-Intrusive Notifications - Non-Intrusive Notifications + არა-შემაწუხებელი შეტყობინებები Minimum Duration: - Minimum Duration: + მინიმალური ხანგრძლივობა: Maximum Duration: - Maximum Duration: + მაქსიმალური ხანგრძლივობა: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + შეტყობინებების ჩვენების ხანგრძლივობა (თუ თაგუნას არ დააწკაპუნებთ) @@ -12234,77 +12234,77 @@ Do you still want to proceed? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + შეტყობინებების ჩვენების მინიმალური ხანგრძლივობა (თუ თაგუნას არ დააწკაპუნებთ) Maximum Number of Notifications: - Maximum Number of Notifications: + გაფრთხილებების მაქსიმალური რაოდენობა: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + ეკრანზე ერთდროულად გამოჩენილი გაფრთხილებების მაქსიმალური რაოდენობა Notification width: - Notification width: + შეტყობინების სიგანე: Width of the notification in pixels - Width of the notification in pixels + შეტყობინების სიგანე პიქსელებში Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + როცა სხვა ფანჯარა გააქტიურდება, ყველა ღია არამოსაბეზრებელი შეტყობინება გაქრება Hide when other window is activated - Hide when other window is activated + დამალვა, როცა სხვა ფანჯარა აქტიურია Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + არა-მოსაბეზრებელი შეტყობინებები არ გამოჩნდება, როცა FreeCAD-ის ფანჯარა აქტიური არაა Do not show when inactive - Do not show when inactive + ნუ აჩვენებ, როცა არააქტიურია Message List - Message List + შეტყობინებების სია Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + სიაში შენარჩუნებული შეტყობინებების რაოდენობა. თუ უდრის 0-ს, ზღვარი არ არსებობს. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + შეტყობინებების მაქსიმალური რაოდენობა (0 = შეზღუდვის გარეშე): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + წაშლის მომხმარებლის გაფრთხილებას შეტყობინებების სიიდან მას შემდეგ, რაც არა-მოსაბეზრებელი მაქსიმალური ხანგრძლივობა გავა. Auto-remove User Notifications - Auto-remove User Notifications + მომხმარებლის გაფრთხილებების ავტომატური წაშლა Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + გაფრთხილებების ადგილის ჩართვას აპლიკაციის გადატვირთვა სჭირდება. @@ -12318,13 +12318,13 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>სამუშაო მაგიდების გადალაგება მათი გადათრევით შეგიძლიათ. დამატებითი სამუშაო მაგიდები დამატებების მმართველით შეგიძლიათ დააყენოთ.</p><p> +ამჟამად თქვენს სისტემას გააჩნია შემდეგ სამუშაო მაგიდები:</p></body></html> Start up workbench: - Start up workbench: + სამუშაო მაგიდის გაშვება: @@ -12372,7 +12372,7 @@ FreeCAD-ის გაშვების შემდეგ Planes - Planes + სიბრტყეები @@ -12405,12 +12405,12 @@ FreeCAD-ის გაშვების შემდეგ Image plane settings - Image plane settings + გამოსახულების სიბრტყის მორგება Planes - Planes + სიბრტყეები @@ -12440,27 +12440,27 @@ FreeCAD-ის გაშვების შემდეგ X distance: - X distance: + X მანძილი: Y distance: - Y distance: + Y მანძილი: Rotation : - Rotation : + ბრუნვა : Transparency : - Transparency : + გამჭვირვალობა : Image size - Image size + გამოსახულებების ზომა @@ -12475,12 +12475,12 @@ FreeCAD-ის გაშვების შემდეგ Keep aspect ratio - Keep aspect ratio + პროპორციების შენარჩუნება Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + გამოსახულების ინტერაქტიური მასშტაბირება გამოსახულების ორი წერტილს შორის სიგრძის დაყენებით. @@ -12490,7 +12490,7 @@ FreeCAD-ის გაშვების შემდეგ Calibration - Calibration + კალიბრაცია @@ -12508,7 +12508,7 @@ FreeCAD-ის გაშვების შემდეგ Color Gradient - Color Gradient + ფერადი გრადიენტი @@ -12516,27 +12516,27 @@ FreeCAD-ის გაშვების შემდეგ If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + თუ გამორთულია, %1 ხელმისაწვდომი სამუშაო მაგიდების სიაში არ გამოჩნდება. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + ეს არის მიმდინარე გაშვების მოდული და ჩართული უნდა იყოს. შესაცვლელად იხილეთ პარამეტრები/ზოგადი/ავტომატური ჩატვირთვა. Shortcut to activate this workbench. - Shortcut to activate this workbench. + ამ სამუშაო მაგიდის გასააქტიურებელი მალსახმობი. Auto-load - Auto-load + ავტომატური ჩატვირთვა If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + თუ ჩართულია %1 ავტომატურად, FreeCAD-ის გაშვებისას ჩაიტვირთება @@ -12556,7 +12556,7 @@ FreeCAD-ის გაშვების შემდეგ To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + რესურსების შესანარჩუნებლად, FreeCAD არ ტვირთავს სამუშაო მაგიდებს, სანამ ისინი არ გამოიყენება. მათი ჩატვირთვამ შეიძლება უზრუნველყოს წვდომა დამატებით პარამეტრებზე, რომლებიც დაკავშირებულია მათ ფუნქციონირებასთან. @@ -12582,7 +12582,7 @@ FreeCAD-ის გაშვების შემდეგ Color Legend - Color Legend + ფერის ლეგენდა @@ -12595,12 +12595,12 @@ FreeCAD-ის გაშვების შემდეგ Delete user notifications - Delete user notifications + მომხმარებლის შეტყობინებების წაშლა Delete All - Delete All + ყველას წაშლა @@ -12608,12 +12608,12 @@ FreeCAD-ის გაშვების შემდეგ Delete user notifications - Delete user notifications + მომხმარებლის შეტყობინებების წაშლა Delete All - Delete All + ყველას წაშლა @@ -12621,17 +12621,17 @@ FreeCAD-ის გაშვების შემდეგ Failed to load image file - Failed to load image file + გამოსახულების ჩატვირთვის შეცდომა Cannot load file %1: %2 - Cannot load file %1: %2 + ფაილის (%1) ჩატვირთვის შეცდომა: %2 Fit to window - Fit to window + ფანჯარაში ჩატევა @@ -12649,13 +12649,13 @@ FreeCAD-ის გაშვების შემდეგ Load image... - Load image... + გამოსახულების ჩატვირთვა... Loads an image - Loads an image + ტვირთავს გამოსახულებას @@ -12663,32 +12663,32 @@ FreeCAD-ის გაშვების შემდეგ FRONT - FRONT + წინა REAR - REAR + უკანა TOP - TOP + თავზე BOTTOM - BOTTOM + ფსკერი RIGHT - RIGHT + მარჯვენა LEFT - LEFT + მარცხენა @@ -12696,7 +12696,7 @@ FreeCAD-ის გაშვების შემდეგ Enter desired distance between the points - Enter desired distance between the points + შეიყვანეთ წერტილებს შორის სასურველი დაშორება diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index b10ee9a03e..2fc6334e29 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Afbeelding bewerken @@ -2005,7 +2005,7 @@ dot/period will always be printed. Language: - Language: + Taal: @@ -2085,7 +2085,7 @@ dit aanpassen aan uw schermgrootte of persoonlijke smaak Size of recent file list: - Size of recent file list: + Grootte van recente bestandslijst: @@ -2853,7 +2853,7 @@ Kies een andere map, alstublieft. Restart required - Restart required + Opnieuw opstarten vereist @@ -5101,13 +5101,13 @@ Larger value eases to pick things, but can make small features impossible to sel Top: - Top: + Boven: Middle: - Middle: + Midden: @@ -5133,7 +5133,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Onder: @@ -5163,17 +5163,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Centraal: Midway: - Midway: + Halverwege: End: - End: + Einde: @@ -8660,7 +8660,7 @@ Do you want to continue? Save image - Save image + Afbeelding opslaan @@ -8777,18 +8777,18 @@ Do you want to continue? Notifier - Notifier + Melder Message - Message + Bericht Notifier: - Notifier: + Melder: @@ -9351,7 +9351,7 @@ the current copy will be lost. Change image... - Change image... + Afbeelding wijzigen... @@ -11735,7 +11735,7 @@ the current copy will be lost. Save image... - Save image... + Afbeelding opslaan... @@ -12038,7 +12038,7 @@ Wilt u toch doorgaan? Clipboard - Clipboard + Klembord @@ -12155,7 +12155,7 @@ Wilt u toch doorgaan? Notification Area - Notification Area + Melding gebied @@ -12215,12 +12215,12 @@ Wilt u toch doorgaan? Minimum Duration: - Minimum Duration: + Minimale duur: Maximum Duration: - Maximum Duration: + Maximale duur: @@ -12241,22 +12241,22 @@ Wilt u toch doorgaan? Maximum Number of Notifications: - Maximum Number of Notifications: + Maximum aantal meldingen: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Maximum aantal meldingen dat tegelijkertijd op het scherm aanwezig zal zijn Notification width: - Notification width: + Breedte melding: Width of the notification in pixels - Width of the notification in pixels + Breedte van de melding in pixels @@ -12281,7 +12281,7 @@ Wilt u toch doorgaan? Message List - Message List + Berichtenlijst @@ -12291,7 +12291,7 @@ Wilt u toch doorgaan? Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maximum berichten (0 = geen limiet): @@ -12442,27 +12442,27 @@ nadat FreeCAD opgestart is X distance: - X distance: + X afstand: Y distance: - Y distance: + Y afstand: Rotation : - Rotation : + Rotatie : Transparency : - Transparency : + Doorzichtigheid: Image size - Image size + Afbeelding afmetingen @@ -12492,7 +12492,7 @@ nadat FreeCAD opgestart is Calibration - Calibration + Kalibratie @@ -12510,7 +12510,7 @@ nadat FreeCAD opgestart is Color Gradient - Color Gradient + Kleur verloop @@ -12533,7 +12533,7 @@ nadat FreeCAD opgestart is Auto-load - Auto-load + Automatisch laden @@ -12602,7 +12602,7 @@ nadat FreeCAD opgestart is Delete All - Delete All + Alles verwijderen @@ -12615,7 +12615,7 @@ nadat FreeCAD opgestart is Delete All - Delete All + Alles verwijderen @@ -12623,7 +12623,7 @@ nadat FreeCAD opgestart is Failed to load image file - Failed to load image file + Laden van afbeeldingsbestand mislukt @@ -12633,7 +12633,7 @@ nadat FreeCAD opgestart is Fit to window - Fit to window + Aanpassen aan venster @@ -12651,13 +12651,13 @@ nadat FreeCAD opgestart is Load image... - Load image... + Afbeelding laden... Loads an image - Loads an image + Laad een afbeelding @@ -12665,32 +12665,32 @@ nadat FreeCAD opgestart is FRONT - FRONT + VOORZIJDE REAR - REAR + ACHTERZIJDE TOP - TOP + BOVEN BOTTOM - BOTTOM + BODEM RIGHT - RIGHT + RECHTS LEFT - LEFT + LINKS diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 53ce4601ae..62c0752eec 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Edytuj obraz @@ -1240,7 +1240,7 @@ Jeśli ta opcja nie jest zaznaczona, właściwość musi być jednoznacznie nazw To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Aby zmienić bieżący skrót, wprowadź nowy skrót w polu poniżej i naciśnij "Przypisz". @@ -2000,12 +2000,12 @@ gdzie zawsze będzie wpisywana kropka. Language and number format - Language and number format + Język i format liczb Language: - Language: + Język: @@ -2015,7 +2015,7 @@ gdzie zawsze będzie wpisywana kropka. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + System jednostek, który ma być używany we wszystkich częściach aplikacji @@ -2040,7 +2040,7 @@ gdzie zawsze będzie wpisywana kropka. Substitute decimal separator - Substitute decimal separator + Zastąp separator dziesiętny @@ -2085,14 +2085,14 @@ w zależności od wielkości ekranu lub swoich upodobań Size of recent file list: - Size of recent file list: + Rozmiar listy ostatnio używanych plików: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Tło okna głównego (gdy nie jest otwarty żaden dokument) będzie składało się z kafelków specjalnego obrazu. +Szczegółowe informacje na temat obrazu można znaleźć w FreeCAD Wiki. @@ -2854,7 +2854,7 @@ Proszę podać inny katalog. Restart required - Restart required + Wymagany restart @@ -3030,12 +3030,12 @@ Proszę podać inny katalog. Failed to extract project - Failed to extract project + Nie udało się rozpakować projektu Failed to create project - Failed to create project + Nie udało się utworzyć projektu @@ -4997,8 +4997,8 @@ długość wiersza w konsoli Python Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Obszar do wskazywania / wyboru elementów w oknie widoku 3D. +Większa wartość ułatwia wybieranie, ale może uniemożliwić wybór małych obiektów. @@ -5089,24 +5089,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Gradient liniowy Radial gradient - Radial gradient + Gradient radialny Top: - Top: + U góry: Middle: - Middle: + Pośrodku: @@ -5132,7 +5132,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + U dołu: @@ -5162,17 +5162,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Centralny: Midway: - Midway: + W połowie: End: - End: + Na końcu: @@ -6213,7 +6213,7 @@ wstępnie wybranymi przed otwarciem tego okna Critical messages - Critical messages + Wiadomości krytyczne @@ -8008,22 +8008,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Pokaż elementy ukryte w widoku drzewa Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Pokaż elementy, które są oznaczone jako "ukryte" w widoku drzewa Toggle visibility in tree view - Toggle visibility in tree view + Przełącz widoczność w widoku drzewa Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Przełącza widoczność wybranych elementów w widoku drzewa @@ -8661,7 +8661,7 @@ Do you want to continue? Save image - Save image + Zapisz obrazek @@ -8778,18 +8778,18 @@ Do you want to continue? Notifier - Notifier + Notifier Message - Message + Wiadomość Notifier: - Notifier: + Zgłaszający: @@ -8804,7 +8804,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Zbyt wiele otwartych powiadomień. Powiadomienia są pomijane! @@ -9353,7 +9353,7 @@ bieżącej kopii zostaną utracone. Change image... - Change image... + Zmień obraz ... @@ -11737,7 +11737,7 @@ bieżącej kopii zostaną utracone. Save image... - Save image... + Zapisz obraz ... @@ -12040,7 +12040,7 @@ Czy nadal chcesz kontynuować? Clipboard - Clipboard + Schowek @@ -12157,7 +12157,7 @@ Czy nadal chcesz kontynuować? Notification Area - Notification Area + Obszar powiadomień @@ -12167,32 +12167,32 @@ Czy nadal chcesz kontynuować? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Obszar powiadomień pojawi się na pasku statusu Enable Notification Area - Enable Notification Area + Włącz obszar powiadomień Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Nieinwazyjne powiadomienia pojawią się obok obszaru powiadomień na pasku statusu Enable non-intrusive notifications - Enable non-intrusive notifications + Włącz powiadomienia Additional data Sources - Additional data Sources + Dodatkowe źródła danych Errors will appear in the notification area - Errors will appear in the notification area + Błędy pojawią się w obszarze powiadomień @@ -12202,7 +12202,7 @@ Czy nadal chcesz kontynuować? Warnings will appear in the notification area - Warnings will appear in the notification area + Ostrzeżenia pojawią się w obszarze powiadomień @@ -12212,22 +12212,22 @@ Czy nadal chcesz kontynuować? Non-Intrusive Notifications - Non-Intrusive Notifications + Nieinwazyjne powiadomienia Minimum Duration: - Minimum Duration: + Najkrótszy czas trwania: Maximum Duration: - Maximum Duration: + Najdłuższy czas trwania: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Czas wyświetlania powiadomienia (o ile przyciski myszy nie zostaną użyte) @@ -12238,77 +12238,77 @@ Czy nadal chcesz kontynuować? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Najkrótszy czas wyświetlania powiadomienia (o ile powiadomienie nie zostanie kliknięte) Maximum Number of Notifications: - Maximum Number of Notifications: + Maksymalna liczba powiadomień: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Maksymalna liczba powiadomień, które będą obecne jednocześnie na ekranie Notification width: - Notification width: + Szerokość obszaru na powiadomienia: Width of the notification in pixels - Width of the notification in pixels + Szerokość powiadomienia w pikselach Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Wszelkie otwarte nieinwazyjne powiadomienia znikną po aktywacji innego okna Hide when other window is activated - Hide when other window is activated + Ukryj po aktywacji innego okna Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Zapobiegaj pojawianiu się nieinwazyjnych powiadomień, gdy okno FreeCAD nie jest aktywne Do not show when inactive - Do not show when inactive + Nie pokazuj, gdy nieaktywne Message List - Message List + Lista wiadomości Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Ograniczenie liczby wiadomości, które będą przechowywane na liście. Jeśli 0 to nie ma limitu. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maksymalna ilość wiadomości (0 = brak limitu): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Usuwa powiadomienia użytkownika z listy wiadomości po upływie maksymalnego czasu trwania. Auto-remove User Notifications - Auto-remove User Notifications + Automatyczne usuwanie powiadomień użytkownika Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Aktywacja obszaru powiadomień wchodzi w życie dopiero po ponownym uruchomieniu aplikacji. @@ -12322,13 +12322,13 @@ Czy nadal chcesz kontynuować? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Można zmieniać kolejność środowisk pracy metodą "przeciągnij i upuść". Dodatkowe środowiska pracy można zainstalować poprzez menedżera dodatków.</p><p> +Obecnie w Twoim systemie znajdują się następujące środowiska pracy:</p></body></html> Start up workbench: - Start up workbench: + Uruchamianie środowiska pracy: @@ -12376,7 +12376,7 @@ po uruchomieniu FreeCAD Planes - Planes + Płaszczyzny @@ -12409,12 +12409,12 @@ po uruchomieniu FreeCAD Image plane settings - Image plane settings + Ustawienia płaszczyzny obrazu Planes - Planes + Płaszczyzny @@ -12444,27 +12444,27 @@ po uruchomieniu FreeCAD X distance: - X distance: + Odległość X: Y distance: - Y distance: + Odległość Y: Rotation : - Rotation : + Obrót : Transparency : - Transparency : + Przezroczystość : Image size - Image size + Rozmiar obrazu @@ -12479,12 +12479,12 @@ po uruchomieniu FreeCAD Keep aspect ratio - Keep aspect ratio + Zachowaj proporcje Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Interaktywnie skaluj obraz, ustawiając odległość pomiędzy dwoma punktami obrazu. @@ -12494,7 +12494,7 @@ po uruchomieniu FreeCAD Calibration - Calibration + Kalibracja @@ -12512,7 +12512,7 @@ po uruchomieniu FreeCAD Color Gradient - Color Gradient + Gradient kolorów @@ -12520,27 +12520,27 @@ po uruchomieniu FreeCAD If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Jeśli opcja jest odznaczona, %1 nie pojawi się na liście dostępnych środowisk pracy. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Jest to bieżący moduł startowy i musi być automatycznie załadowany. Aby zmienić ustawienia, patrz: Preferencje → Ogólne → Uruchamianie. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Skrót do aktywacji tego środowiska pracy. Auto-load - Auto-load + Wczytaj automatycznie If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Jeśli opcja jest zaznaczona, %1 zostanie załadowany automatycznie po uruchomieniu programu FreeCAD @@ -12560,7 +12560,7 @@ po uruchomieniu FreeCAD To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + <html><head/><body><p>Aby oszczędzać zasoby, FreeCAD nie ładuje środowisk pracy, dopóki nie zostaną użyte. Ich załadowanie może zapewnić dostęp do dodatkowych preferencji związanych z ich funkcjonalnością.</p><p>Następujące środowiska pracy są dostępne w twojej instalacji, ale nie są jeszcze załadowane:</p></body></html> @@ -12586,7 +12586,7 @@ po uruchomieniu FreeCAD Color Legend - Color Legend + Legenda kolorów @@ -12599,12 +12599,12 @@ po uruchomieniu FreeCAD Delete user notifications - Delete user notifications + Usuń powiadomienia użytkownika Delete All - Delete All + Usuń wszystkie @@ -12612,12 +12612,12 @@ po uruchomieniu FreeCAD Delete user notifications - Delete user notifications + Usuń powiadomienia użytkownika Delete All - Delete All + Usuń wszystkie @@ -12625,17 +12625,17 @@ po uruchomieniu FreeCAD Failed to load image file - Failed to load image file + Nie udało się załadować pliku obrazu Cannot load file %1: %2 - Cannot load file %1: %2 + Nie można załadować pliku %1: %2 Fit to window - Fit to window + Dopasuj do okna @@ -12653,13 +12653,13 @@ po uruchomieniu FreeCAD Load image... - Load image... + Załaduj obraz ... Loads an image - Loads an image + Ładuje obraz @@ -12667,32 +12667,32 @@ po uruchomieniu FreeCAD FRONT - FRONT + PRZÓD REAR - REAR + TYŁ TOP - TOP + GÓRA BOTTOM - BOTTOM + SPÓD RIGHT - RIGHT + PRAWA LEFT - LEFT + LEWA @@ -12700,7 +12700,7 @@ po uruchomieniu FreeCAD Enter desired distance between the points - Enter desired distance between the points + Wprowadź pożądaną odległość między punktami diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 0bb8887626..6b8610a2ad 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Editare imagine @@ -1079,7 +1079,7 @@ Cu toate acestea, proprietatea este încă utilizată într-un script cu numele Property group templates - Property group templates + Șabloane grupuri de proprietăți @@ -1240,40 +1240,40 @@ Cu toate acestea, proprietatea este încă utilizată într-un script cu numele To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Pentru a modifica o comandă rapidă curentă, introduceți noua comandă rapidă în câmpul de mai jos și apăsați 'Atribuiți'. &New shortcut: - &New shortcut: + Scurtătură nouă Multi-key sequence delay: - Multi-key sequence delay: + Întârziere secvență cu mai multe taste: Time in milliseconds to wait for the next key stroke of the current key sequence. For example, pressing 'F' twice in less than the time delay setting here will be be treated as shorctcut key sequence 'F, F'. - Time in milliseconds to wait for the next key stroke of the current key sequence. -For example, pressing 'F' twice in less than the time delay setting here will be -be treated as shorctcut key sequence 'F, F'. + Timp în milisecunde pentru a aștepta următorul strop de tastă al secvenței curente. +De exemplu, apăsarea 'F' de două ori mai puțin decât setarea de întârziere a timpului aici va fi +considerată ca fiind secvența tastei shorctcut 'F, F'. This list shows commands having the same shortcut in the priority from high to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. - This list shows commands having the same shortcut in the priority from high -to low. If more than one command with the same shortcut are active at the -same time. The one with the highest priority will be triggered. + Această listă arată comenzile care au aceeași scurtătură în prioritate de la înaltă +prea jos. Dacă sunt active mai multe comenzi cu aceeași comandă rapidă la +acelasi timp. Va fi declanșat cel cu cea mai mare prioritate. Shortcut priority list: - Shortcut priority list: + Lista de priorităţi scurtături: @@ -1330,7 +1330,7 @@ same time. The one with the highest priority will be triggered. Type to search... - Type to search... + Tastați pentru a căuta ... @@ -1345,7 +1345,7 @@ same time. The one with the highest priority will be triggered. Shortcut - Shortcut + Comandă rapidă @@ -1413,7 +1413,7 @@ same time. The one with the highest priority will be triggered. Category: - Category: + Categorie: @@ -1453,7 +1453,7 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent: 0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Notă:</span> Modificările devin active data viitoare când încărcați bancul de lucru corespunzător</p ></body></html> @@ -1618,7 +1618,7 @@ same time. The one with the highest priority will be triggered. Point color: - Point color: + Culoarea liniei: @@ -1928,10 +1928,10 @@ same time. The one with the highest priority will be triggered. will be substituted with locale separator, except in Python Console and Macro Editor where a dot/period will always be printed. - If enabled, numerical keypad decimal separator -will be substituted with locale separator, except -in Python Console and Macro Editor where a -dot/period will always be printed. + Dacă este activat, separatorul zecimal de tastatură numerică +va fi înlocuit cu separator local, exceptând +în Python Console și Macro Editor, unde un +punct/period va fi întotdeauna imprimat. @@ -2001,12 +2001,12 @@ dot/period will always be printed. Language and number format - Language and number format + Limbă și format de număr Language: - Language: + Limba: @@ -2016,7 +2016,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Sistem unităților de măsură care ar trebui să fie utilizat pentru toate componentele aplicației @@ -2041,7 +2041,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + Separator zecimal înlocuitor @@ -2086,14 +2086,14 @@ acest lucru în funcție de dimensiunea ecranului sau de gustul personal Size of recent file list: - Size of recent file list: + Dimensiunea listei de fişiere recente: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Fundalul ferestrei principale (atunci când nu este deschis niciun document) va fi format din plăci ale unei imagini speciale. +Consultați Wiki FreeCAD pentru detalii despre imagine. @@ -2801,17 +2801,17 @@ Specify another directory, please. Toggle visibility of Addon preference pack '%1' (use Addon Manager to permanently remove) - Toggle visibility of Addon preference pack '%1' (use Addon Manager to permanently remove) + Comută vizibilitatea pachetului de preferințe Addon '%1' (folosește Addon Manager pentru a elimina permanent) Delete saved preference pack? - Delete saved preference pack? + Ștergeți pachetul de preferințe salvat? Are you sure you want to delete the preference pack named '%1'? This cannot be undone. - Are you sure you want to delete the preference pack named '%1'? This cannot be undone. + Sigur doriți să ștergeți pachetul de preferințe numit „%1”? Acest lucru nu poate fi anulat. @@ -2851,7 +2851,7 @@ Specify another directory, please. Restart required - Restart required + Repornire necesară @@ -2944,7 +2944,7 @@ Specify another directory, please. &Comment: - &Comment: + &Comentariu: @@ -3027,12 +3027,12 @@ Specify another directory, please. Failed to extract project - Failed to extract project + Extragerea proiectului a eșuat Failed to create project - Failed to create project + Crearea proiectului a eșuat @@ -3272,17 +3272,17 @@ din consola Python către panoul de vizualizare Rapoarte Revert to Backup Config - Revert to Backup Config + Revenire la configurarea backup-ului WARNING: this process will undo any preference changes made since the specified date, and will also reset your Recent files and Macros to their state on that date. - WARNING: this process will undo any preference changes made since the specified date, and will also reset your Recent files and Macros to their state on that date. + AVERTISMENT: acest proces va anula orice modificări de preferință făcute de la data specificată, și de asemenea va reseta fișierele recente și Macro la starea lor la acea dată. Available backup files: - Available backup files: + Salvare de siguranţă disponibilă de la @@ -3290,7 +3290,7 @@ din consola Python către panoul de vizualizare Rapoarte No selection in dialog, cannot load backup file - No selection in dialog, cannot load backup file + Nicio selecţie în dialog, nu se poate încărca fişierul copie de rezervă @@ -3369,15 +3369,15 @@ colțul din dreapta jos în cadrul fișierelor deschise Size of main coordinate system representation in the corner -- in % of height/width of viewport - Size of main coordinate system representation -in the corner -- in % of height/width of viewport + Mărimea reprezentării coordonatelor principale +în colţ -- în % înălţime/lăţime de vizualizare Axis cross will be shown by default at file opening or creation - Axis cross will be shown by default at file -opening or creation + Crucea axei va fi afișată implicit la +deschiderea sau crearea fișierului @@ -3437,16 +3437,16 @@ can be rendered directly by GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by GPU. + Dacă este selectat, vor fi utilizate Vertex Buffer Objects (VBO). +Un VBO este o caracteristică OpenGL care oferă metode de încărcare +date de vârf (poziție, vector normal, culoare etc.) pe placa grafică. +VBO-urile oferă câștiguri substanțiale de performanță, deoarece datele se află +în memoria grafică mai degrabă decât în memoria sistemului și așadar +poate fi redat direct de GPU. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support on the FreeCAD forums +Notă: Uneori, această caracteristică poate duce la o serie de diferite +probleme, de la anomalii grafice la erori de blocare a GPU-ului. A își aminti să +raportați această setare ca fiind activată atunci când căutați asistență pe forumurile FreeCAD @@ -3457,13 +3457,13 @@ There are 3 options available to achieve this: 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - 'Render Caching' is another way to say 'Rendering Acceleration'. -There are 3 options available to achieve this: -1) 'Auto' (default), let Coin3D decide where to cache. -2) 'Distributed', manually turn on cache for all view provider root node. -3) 'Centralized', manually turn off cache in all nodes of all view provider, and -only cache at the scene graph root node. This offers the fastest rendering speed -but slower response to any scene changes. + "Render Caching” este un alt mod de a spune "Accelerarea Redării”. +Există 3 opțiuni disponibile pentru a realiza asta: +1) 'Auto' (implicit), permite Coin3D să decidă unde să facă cache. +2) 'Distribuit', activați manual cache-ul pentru întregul modul rădăcină al furnizorului de vizualizări. +3) 'Centralizat', dezactivează manual geocutia în toate nodurile de vizualizare ale furnizorului, și +doar cache-ul din nodul rădăcină al graficului de scenă. Aceasta oferă cea mai rapidă viteză de redare +dar un răspuns mai lent la orice schimbare de scenă. @@ -3523,7 +3523,7 @@ but slower response to any scene changes. Render types of transparent objects - Render types of transparent objects + Redare tipuri de obiecte transparente @@ -3718,7 +3718,7 @@ dimensiunea casetei de încadrare a obiectului 3D care este afișat în prezent. Notify the user if the cache size exceeds the specified limit - Notify the user if the cache size exceeds the specified limit + Notifică utilizatorul dacă dimensiunea geocutiei depăşeşte limita specificată @@ -3728,7 +3728,7 @@ dimensiunea casetei de încadrare a obiectului 3D care este afișat în prezent. Current cache size: %1 - Current cache size: %1 + Dimensiunea actuală a memoriei cache: %1 @@ -3835,7 +3835,7 @@ vor fi afișate transparent Out &transparent - Out &transparent + Epuizare & transparentă @@ -4067,7 +4067,7 @@ obțin sufixul datei în conformitate cu formatul specificat Allow objects to have same label - Allow objects to have same label + Permite obiectelor să aibă aceeași etichetă/nume @@ -4189,17 +4189,17 @@ Puteți folosi și formatul: John Doe <john@doe.com> CERN Open Hardware Licence strongly-reciprocal - CERN Open Hardware Licence strongly-reciprocal + CERN Licență hardware deschisă extrem de reciprocă CERN Open Hardware Licence weakly-reciprocal - CERN Open Hardware Licence weakly-reciprocal + CERN Licență hardware deschisă extrem de reciprocă CERN Open Hardware Licence permissive - CERN Open Hardware Licence permissive + CERN Permisiune de licență Open Hardware @@ -4477,22 +4477,22 @@ Puteți folosi și formatul: John Doe <john@doe.com> Offscreen (New) - Offscreen (New) + În afara ecranului (nou) Offscreen (Old) - Offscreen (Old) + În afara ecranului (vechi) Framebuffer (custom) - Framebuffer (custom) + Cadru tampon (personalizat) Framebuffer (as is) - Framebuffer (as is) + Cadru tampon (ca atare) @@ -4634,12 +4634,12 @@ Puteți folosi și formatul: John Doe <john@doe.com> Steps by turn - Steps by turn + Pași prin rotire Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) - Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) + Numărul de pași prin rotire când se folosesc săgeți (implicit = 8: unghi pas = 360/8 = 45 deg) @@ -4684,12 +4684,12 @@ Puteți folosi și formatul: John Doe <john@doe.com> Font name: - Font name: + Nume font: Font name of the navigation cube - Font name of the navigation cube + Numele fontului cubului de navigare @@ -4704,24 +4704,24 @@ Puteți folosi și formatul: John Doe <john@doe.com> Font size: - Font size: + Dimensiune font: Font size of the navigation cube - Font size of the navigation cube + Dimensiune font cub de navigare Button color - Button color + Culoare buton color for all elements around the cube - color for all elements -around the cube + culoare pentru toate elementele +din jurul cubului @@ -4756,10 +4756,10 @@ Selectează un set și apoi apasă butonul pentru a vedea configurația mențion Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - Rotation orbit style. -Trackball: moving the mouse horizontally will rotate the part around the y-axis -Turntable: the part will be rotated around the z-axis (with constrained axes). -Free Turntable: the part will be rotated around the z-axis. + Stilul rotaţiei orbitului. +Urmărirea: mutarea mouse-ului orizontal va roti partea în jurul axei y +Turntable: partea va fi rotită în jurul axei z (cu axe constrânse). +Gratuit de întoarcere: partea va fi rotită în jurul axei z. @@ -4774,7 +4774,7 @@ Free Turntable: the part will be rotated around the z-axis. Free Turntable - Free Turntable + Gratuit de Turntable @@ -4851,7 +4851,7 @@ Valoarea este diametrul sferei pentru a o potrivi pe ecran. Zoom step - Zoom step + Pas de mărire @@ -4972,7 +4972,7 @@ spațiul orizontal disponibil în consola Python Saves Python history across sessions - Saves Python history across sessions + Salvează istoricul Python prin sesiuni @@ -4997,8 +4997,8 @@ spațiul orizontal disponibil în consola Python Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Zona pentru elemente de alegere în vizualizare 3D. +Valoare mai mare se ușurează să aleagă lucruri, dar poate face imposibilă selectarea caracteristicilor micuțe. @@ -5019,12 +5019,12 @@ Larger value eases to pick things, but can make small features impossible to sel Record selection in tree view in order to go back/forward using navigation button - Record selection in tree view in order to go back/forward using navigation button + Înregistrați selecția în vizualizarea arborelui pentru a merge înapoi/înainte folosind butonul de navigare Add checkboxes for selection in document tree - Add checkboxes for selection in document tree + Adăugați bifele pentru selecție în arborele de documente @@ -5089,34 +5089,34 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Granat liniar Radial gradient - Radial gradient + Grosimea radială Top: - Top: + Partea de sus: Middle: - Middle: + Mijloc: Switches the colors of the gradient - Switches the colors of the gradient + Schimbă culorile gradientului Switch - Switch + Comutare @@ -5132,7 +5132,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Partea de jos: @@ -5162,17 +5162,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Central: Midway: - Midway: + La mijloc: End: - End: + Sfârșit: @@ -5218,8 +5218,8 @@ Larger value eases to pick things, but can make small features impossible to sel List of last used calculations. To add a calculation press Return in the value input field - List of last used calculations. -To add a calculation press Return in the value input field + Lista ultimelor calcule folosite. +Pentru a adăuga un calcul, apăsați Întoarcere în câmpul de intrare a valorii @@ -5593,7 +5593,7 @@ The 'Status' column shows whether the document could be recovered. Panning: - Panning: + Panoramare: @@ -5927,7 +5927,7 @@ The 'Status' column shows whether the document could be recovered. Attach to remote debugger - Attach to remote debugger + Atașează la depanator la distanță @@ -6074,17 +6074,17 @@ The 'Status' column shows whether the document could be recovered. Auto select depending objects - Auto select depending objects + Selectare automată în funcție de obiecte Show dependencies - Show dependencies + Afișare dependențe Depending on - Depending on + În funcție de @@ -6101,7 +6101,7 @@ The 'Status' column shows whether the document could be recovered. Depended by - Depended by + Depinde de @@ -6211,12 +6211,12 @@ selectate inițial, înainte de a deschide acest dialog Critical messages - Critical messages + Mesaje critice Show Report view on - Show Report view on + Afișare afișare raport pe @@ -6804,17 +6804,17 @@ Doriți să salvați modificările? Help addon needed! - Help addon needed! + Ajutor supliment necesar! The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager - The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager + Sistemul de ajutor al %1 este acum gestionat de suplimentul "Ajutor". Acesta poate fi instalat cu uşurinţă prin Addons Manager Open Addon Manager - Open Addon Manager + Deschide Addon Manager @@ -6982,7 +6982,7 @@ Cum doresti sa continuam? Press modifier keys - Press modifier keys + Apăsați taste modificatoare @@ -7026,17 +7026,17 @@ Cum doresti sa continuam? Press right mouse button and move mouse - Press right mouse button and move mouse + Apasă butonul dreapta al mouse-ului și mișcă mouse-ul Press left mouse button and move mouse - Press left mouse button and move mouse + Apasă butonul stâng al mouse-ului și mișcă mouse-ul Press middle mouse button or SHIFT and right mouse button - Press middle mouse button or SHIFT and right mouse button + Apăsaţi butonul mijlociu al mouse-ului sau SHIFT şi butonul dreapta al mouse-ului @@ -7150,7 +7150,7 @@ Cum doresti sa continuam? Rename property group - Rename property group + Redenumește grupul de proprietăți @@ -7160,7 +7160,7 @@ Cum doresti sa continuam? Group name: - Group name: + Nume grup: @@ -7350,7 +7350,7 @@ Doriți să ieşiți fără a salva datele dumneavoastră? Run macro %1 (Shift+click to edit) keyboard shortcut: %2 - Run macro %1 (Shift+click to edit) keyboard shortcut: %2 + Rulează scurtătura macro %1 (Shift+click pentru editare) tastatură: %2 @@ -7396,7 +7396,7 @@ Doriți să ieşiți fără a salva datele dumneavoastră? Next - Next + Următoarea @@ -7750,7 +7750,7 @@ Doriţi să specificaţi un alt director? Belarusian - Belarusian + Belarusă @@ -7895,7 +7895,7 @@ Doriţi să specificaţi un alt director? Serbian, Latin - Serbian, Latin + Serbian, Latin @@ -8009,22 +8009,22 @@ Doriţi să specificaţi un alt director? Show items hidden in tree view - Show items hidden in tree view + Arată elementele ascunse în vizualizarea arborelui Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Arată elementele care sunt marcate ca 'ascunse' în vizualizarea arborelui Toggle visibility in tree view - Toggle visibility in tree view + Comută vizibilitatea în vizualizarea arborelui Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Activează/dezactivează vizibilitatea elementelor selectate în vizualizarea arborelui @@ -8662,7 +8662,7 @@ Doriţi să continuaţi? Save image - Save image + Salvează imaginea @@ -8779,33 +8779,33 @@ Doriţi să continuaţi? Notifier - Notifier + Notificator Message - Message + Mesaj Notifier: - Notifier: + Notificator: Do you want to skip confirmation of further critical message notifications while loading the file? - Do you want to skip confirmation of further critical message notifications while loading the file? + Doriți să omiteți confirmarea altor notificări pentru mesaje critice în timpul încărcării fișierului? Critical Message - Critical Message + Mesaj critic Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Prea multe notificări neintruzive deschise. Notificările sunt omise! @@ -9254,12 +9254,12 @@ liniuță jos și nu trebuie să înceapă cu o cifră. Select which object to copy or exclude when configuration changes. All external linked objects are excluded by default. - Select which object to copy or exclude when configuration changes. All external linked objects are excluded by default. + Selectați ce obiect trebuie copiat sau exclus atunci când se schimbă configurarea. Toate obiectele externe legate sunt excluse în mod implicit. Please select which objects to copy when the configuration is changed - Please select which objects to copy when the configuration is changed + Vă rugăm să selectați ce obiecte să copiați atunci când configurația este schimbată @@ -9270,8 +9270,8 @@ liniuță jos și nu trebuie să înceapă cu o cifră. Apply the setting to all links. Or, uncheck this option to apply only to this link. - Apply the setting to all links. Or, uncheck this -option to apply only to this link. + Aplică setarea la toate link-urile. Sau, debifează această opțiune +pentru a se aplica numai la acest link. @@ -9286,7 +9286,7 @@ option to apply only to this link. Enable auto copy of linked object when its configuration is changed - Enable auto copy of linked object when its configuration is changed + Activează copierea automată a obiectului legat atunci când configurația sa este schimbată @@ -9298,8 +9298,8 @@ option to apply only to this link. Copy the linked object when its configuration is changed. Also auto redo the copy if the original linked object is changed. - Copy the linked object when its configuration is changed. -Also auto redo the copy if the original linked object is changed. + Copiați obiectul legat atunci când configurația sa este modificată. +De asemenea, refaceți automat copia în cazul în care obiectul original legat este schimbat. @@ -9310,7 +9310,7 @@ Also auto redo the copy if the original linked object is changed. Refresh configurable object - Refresh configurable object + Reîmprospătează obiectul configurabil @@ -9318,9 +9318,9 @@ Also auto redo the copy if the original linked object is changed. creating a new deep copy. Note that any changes made to the current copy will be lost. - Synchronize the original configurable source object by -creating a new deep copy. Note that any changes made to -the current copy will be lost. + Sincronizează obiectul sursă configurabil original +creând o nouă copie profundă. Țineți cont că orice modificări făcute +copia curentă va fi pierdută. @@ -9331,12 +9331,12 @@ the current copy will be lost. Change whether show each link array element as individual objects - Change whether show each link array element as individual objects + Modifică dacă afișează fiecare element de array al legăturii ca obiecte individuale Transform at the origin of the placement - Transform at the origin of the placement + Transformare la originea plasamentului @@ -9352,7 +9352,7 @@ the current copy will be lost. Change image... - Change image... + Schimbă imaginea... @@ -9375,7 +9375,7 @@ the current copy will be lost. Box element selection - Box element selection + Selectare element căsuță @@ -10111,7 +10111,7 @@ the current copy will be lost. Strip on level of link - Strip on level of link + Bandă la nivelul link-ului @@ -10125,7 +10125,7 @@ the current copy will be lost. Attach to a remotely running debugger - Attach to a remotely running debugger + Atașează la un depanator care rulează de la distanță @@ -10542,7 +10542,7 @@ the current copy will be lost. Report a bug or suggest a feature - Report a bug or suggest a feature + Raportează o eroare sau sugerează o caracteristică @@ -10668,7 +10668,7 @@ the current copy will be lost. Repeat the backed selection - Repeat the backed selection + Repetă selecția suportată @@ -10986,7 +10986,7 @@ the current copy will be lost. TreeView behavior options and actions - TreeView behavior options and actions + Opțiuni de comportament TreeView și acțiuni @@ -11182,7 +11182,7 @@ the current copy will be lost. Set to default home view - Set to default home view + Setează la vizualizarea implicită a domiciliului @@ -11522,13 +11522,13 @@ the current copy will be lost. Recall working view - Recall working view + Recuperare vizualizare lucru Recall previously stored temporary working view - Recall previously stored temporary working view + Rechemați modul de lucru temporar stocat anterior @@ -11536,13 +11536,13 @@ the current copy will be lost. Store working view - Store working view + Vedere de lucru magazin Store a document-specific temporary working view - Store a document-specific temporary working view + Salvați un modul de lucru temporar specific documentului @@ -11609,7 +11609,7 @@ the current copy will be lost. Record selection in tree view in order to go back/forward using navigation button - Record selection in tree view in order to go back/forward using navigation button + Înregistrați selecția în vizualizarea arborelui pentru a merge înapoi/înainte folosind butonul de navigare @@ -11645,12 +11645,12 @@ the current copy will be lost. Sync placement - Sync placement + Plasare sincronizare Auto adjust placement on drag and drop objects across coordinate systems - Auto adjust placement on drag and drop objects across coordinate systems + Reglaţi automat plasarea pe tragere şi plasare obiecte între sistemele de coordonate @@ -11658,7 +11658,7 @@ the current copy will be lost. Sync selection - Sync selection + Sincronizează selecția @@ -11736,7 +11736,7 @@ the current copy will be lost. Save image... - Save image... + Salvare imagine... @@ -11910,10 +11910,10 @@ Doriți să salvați documentul acum? Please check the Report View for more details. Do you still want to proceed? - The document contains dependency cycles. -Please check the Report View for more details. + Documentul conține cicluri de dependență. +Vă rugăm să verificați raportul pentru mai multe detalii. -Do you still want to proceed? +Doriți în continuare să continuați? @@ -11939,32 +11939,32 @@ Do you still want to proceed? Tree view item background. Only effective in overlay. - Tree view item background. Only effective in overlay. + Fundalul elementului de vizualizare copac este eficient doar în suprapunere. Tree view item background padding. - Tree view item background padding. + Asocierea elementului de fundal pentru vizualizarea arborelor. Hide extra tree view column for item description. - Hide extra tree view column for item description. + Ascunde coloana extra de vizualizare arbore pentru descrierea elementului. Hide tree view scroll bar in dock overlay. - Hide tree view scroll bar in dock overlay. + Ascunde bara de derulare a arborelui în suprapunere cu doc. Hide tree view header view in dock overlay. - Hide tree view header view in dock overlay. + Ascunde vizualizarea arborelui de antet în suprapunere cu dock. Allow tree view columns to be manually resized. - Allow tree view columns to be manually resized. + Permite redimensionarea manuală a coloanelor de vizualizare a arborelor. @@ -12039,7 +12039,7 @@ Do you still want to proceed? Clipboard - Clipboard + Clipboard @@ -12156,7 +12156,7 @@ Do you still want to proceed? Notification Area - Notification Area + Zona de notificare @@ -12166,32 +12166,32 @@ Do you still want to proceed? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Zona de notificare va apărea în bara de stare Enable Notification Area - Enable Notification Area + Activează zona de notificare Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Notificările neintruzive vor apărea lângă zona de notificare în bara de stare Enable non-intrusive notifications - Enable non-intrusive notifications + Activează notificările neintruzive Additional data Sources - Additional data Sources + Surse de date suplimentare Errors will appear in the notification area - Errors will appear in the notification area + Erorile vor apărea în zona de notificare @@ -12201,7 +12201,7 @@ Do you still want to proceed? Warnings will appear in the notification area - Warnings will appear in the notification area + Avertismentele vor apărea în zona de notificare @@ -12211,22 +12211,22 @@ Do you still want to proceed? Non-Intrusive Notifications - Non-Intrusive Notifications + Notificări discrete Minimum Duration: - Minimum Duration: + Durata Minimă: Maximum Duration: - Maximum Duration: + Durată maximă: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Durata în care notificarea va fi afișată (dacă nu se dă click pe butoanele mouse-ului) @@ -12237,77 +12237,77 @@ Do you still want to proceed? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Durata minimă în care va fi afișată notificarea (cu excepția cazului în care se dă click pe notificare) Maximum Number of Notifications: - Maximum Number of Notifications: + Numărul maxim de notificări: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Numărul maxim de notificări care vor fi prezente simultan pe ecran Notification width: - Notification width: + Lățime notificare: Width of the notification in pixels - Width of the notification in pixels + Lățimea notificării în pixeli Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Orice notificări deschise neintruzive vor dispărea atunci când este activată o altă fereastră Hide when other window is activated - Hide when other window is activated + Ascunde când este activată cealaltă fereastră Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Previne să apară notificări neinvazive atunci când Fereastra FreeCAD nu este fereastra activă Do not show when inactive - Do not show when inactive + Nu se afișează când este inactiv Message List - Message List + Listă mesaje Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Limitează numărul de mesaje care vor fi păstrate în listă. Dacă 0 nu există limite. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Numărul maxim de mesaje (0 = fără limită): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Elimină notificările utilizatorului din lista de mesaje după ce durata maximă neintruzivă a expirat. Auto-remove User Notifications - Auto-remove User Notifications + Ștergere automată notificări utilizator Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Activarea ariei de notificare intră în vigoare numai după repornirea cererii. @@ -12321,13 +12321,13 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Puteți reordona atelierele prin tragere și scădere. Atelierele suplimentare pot fi instalate prin intermediul managerului de suplimente.</p><p> +În prezent, sistemul dvs. are următoarele ateliere:</p></body></html> Start up workbench: - Start up workbench: + Start workbench-ul de lucru: @@ -12339,7 +12339,7 @@ după lansarea FreeCAD Workbench selector position : - Workbench selector position : + Poziție selector banc de lucru: @@ -12348,11 +12348,11 @@ după lansarea FreeCAD 'Toolbar': In the toolbars, as a movable toolbar. 'Left Corner': In the menu bar, on the left corner. 'Right Corner': In the menu bar, on the right corner. - Customize where the workbench selector appears (restart required). + Personalizează unde apare selectorul bancului de lucru (e nevoie de repornire). -'Toolbar': In the toolbars, as a movable toolbar. -'Left Corner': In the menu bar, on the left corner. -'Right Corner': In the menu bar, on the right corner. +'Bara de instrumente': În bara de unelte, ca bară de instrumente mobilă. +'Colț Stânga': În bara de meniu, în colțul stânga. +'Colț Dreapt': în bara de meniu, în colțul din dreapta. @@ -12375,7 +12375,7 @@ după lansarea FreeCAD Planes - Planes + Planuri @@ -12408,12 +12408,12 @@ după lansarea FreeCAD Image plane settings - Image plane settings + Setări imagine plan Planes - Planes + Planuri @@ -12443,27 +12443,27 @@ după lansarea FreeCAD X distance: - X distance: + Distanța x: Y distance: - Y distance: + Distanța Y Rotation : - Rotation : + Rotire : Transparency : - Transparency : + Transparență: Image size - Image size + Dimensiune imagine @@ -12478,12 +12478,12 @@ după lansarea FreeCAD Keep aspect ratio - Keep aspect ratio + Păstrați raportul de aspect Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Scalează interactiv imaginea setând o lungime între două puncte ale imaginii. @@ -12493,7 +12493,7 @@ după lansarea FreeCAD Calibration - Calibration + Calibrare @@ -12511,7 +12511,7 @@ după lansarea FreeCAD Color Gradient - Color Gradient + Gradient de culoare @@ -12519,27 +12519,27 @@ după lansarea FreeCAD If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Dacă nu este bifat, %1 nu va apărea în bancurile de lucru disponibile. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Acesta este modulul curent de pornire, și trebuie să fie activat. Vezi Preferințe/Generale/Autoîncărcate pentru modificare. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Scurtătură pentru a activa acest atelier. Auto-load - Auto-load + Autoîncărcare If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Daca este bifat, %1 va fi incarcat automat cand FreeCAD incepe @@ -12559,7 +12559,7 @@ după lansarea FreeCAD To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Pentru a păstra resursele, FreeCAD nu încarcă atelierele de lucru până nu sunt utilizate. Încărcarea acestora poate oferi acces la preferințe suplimentare legate de funcționalitatea lor. @@ -12572,12 +12572,12 @@ după lansarea FreeCAD Left corner - Left corner + Colț stânga Right corner - Right corner + Colţul din dreapta @@ -12585,7 +12585,7 @@ după lansarea FreeCAD Color Legend - Color Legend + Legenda culorii @@ -12598,12 +12598,12 @@ după lansarea FreeCAD Delete user notifications - Delete user notifications + Ştergeţi notificările utilizatorului Delete All - Delete All + Şterge tot @@ -12611,12 +12611,12 @@ după lansarea FreeCAD Delete user notifications - Delete user notifications + Ştergeţi notificările utilizatorului Delete All - Delete All + Şterge tot @@ -12624,17 +12624,17 @@ după lansarea FreeCAD Failed to load image file - Failed to load image file + Încărcarea imaginii a eșuat Cannot load file %1: %2 - Cannot load file %1: %2 + Nu se poate încărca fișierul %1: %2 Fit to window - Fit to window + Potrivire la fereastră @@ -12652,13 +12652,13 @@ după lansarea FreeCAD Load image... - Load image... + Încărcare imagini Loads an image - Loads an image + Încarcă o imagine @@ -12666,32 +12666,32 @@ după lansarea FreeCAD FRONT - FRONT + FRONTUL REAR - REAR + SPATE TOP - TOP + DE SUS BOTTOM - BOTTOM + DE JOS RIGHT - RIGHT + DREPTUL LEFT - LEFT + STANGA @@ -12699,7 +12699,7 @@ după lansarea FreeCAD Enter desired distance between the points - Enter desired distance between the points + Introduceți distanța dorită între puncte diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index ffa2aecf1d..8696ebd6c8 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Редактировать изображение @@ -1240,7 +1240,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Чтобы изменить текущий ярлык, введите новый ярлык в поле ниже и нажмите 'Назначить'. @@ -1997,12 +1997,12 @@ dot/period will always be printed. Language and number format - Language and number format + Язык и числовой формат Language: - Language: + Язык интерфейса: @@ -2012,7 +2012,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Система единиц измерения, которая должна использоваться для всех компонентов приложения @@ -2037,7 +2037,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + Замена десятичного разделителя @@ -2082,14 +2082,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + Размер списка последних файлов: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Фон главного окна (при отсутствии документа) будет состоять из плиток специального изображения. +Смотрите Вики FreeCAD для получения подробной информации о изображении. @@ -2851,7 +2851,7 @@ Specify another directory, please. Restart required - Restart required + Требуется перезапуск @@ -3027,12 +3027,12 @@ Specify another directory, please. Failed to extract project - Failed to extract project + Не удалось извлечь проект Failed to create project - Failed to create project + Не удалось создать проект @@ -4988,8 +4988,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Область выбора элементов в 3D виде. +Большее значение облегчает выбор элемента, но может сделать невозможным выбор небольших элементов. @@ -5080,24 +5080,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Линейный градиент Radial gradient - Radial gradient + Радиальный градиент Top: - Top: + Верх: Middle: - Middle: + В центре: @@ -5123,7 +5123,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Снизу: @@ -5153,17 +5153,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Центральное: Midway: - Midway: + Полпути (Середина): End: - End: + Конец: @@ -6204,7 +6204,7 @@ originally selected prior to opening this dialog Critical messages - Critical messages + Критические сообщения @@ -8001,22 +8001,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Показать элементы, скрытые в дереве Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Показать элементы, помеченные как 'скрытые' в дереве Toggle visibility in tree view - Toggle visibility in tree view + Переключить видимость в виде дерева Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Переключение видимости выбранных элементов в виде дерева @@ -8654,7 +8654,7 @@ Do you want to continue? Save image - Save image + Сохранить изображение @@ -8771,18 +8771,18 @@ Do you want to continue? Notifier - Notifier + Уведомления Message - Message + Сообщение Notifier: - Notifier: + Уведомления: @@ -8797,7 +8797,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Слишком много открытых ненавязчивых уведомлений. Уведомления пропускаются! @@ -9344,7 +9344,7 @@ the current copy will be lost. Change image... - Change image... + Изменить изображение... @@ -11728,7 +11728,7 @@ the current copy will be lost. Save image... - Save image... + Сохранить изображение... @@ -12031,7 +12031,7 @@ Do you still want to proceed? Clipboard - Clipboard + Буфер обмена @@ -12148,7 +12148,7 @@ Do you still want to proceed? Notification Area - Notification Area + Область уведомлений @@ -12158,32 +12158,32 @@ Do you still want to proceed? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Область уведомлений будет отображаться в строке состояния Enable Notification Area - Enable Notification Area + Включить область уведомлений Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Не назойливые уведомления появятся рядом с областью уведомлений в строке состояния Enable non-intrusive notifications - Enable non-intrusive notifications + Включить ненавязчивые уведомления Additional data Sources - Additional data Sources + Дополнительные источники данных Errors will appear in the notification area - Errors will appear in the notification area + Ошибки появятся в области уведомлений @@ -12193,7 +12193,7 @@ Do you still want to proceed? Warnings will appear in the notification area - Warnings will appear in the notification area + Предупреждения появятся в области уведомлений @@ -12203,22 +12203,22 @@ Do you still want to proceed? Non-Intrusive Notifications - Non-Intrusive Notifications + Ненавязчивые уведомления Minimum Duration: - Minimum Duration: + Минимальная длительность: Maximum Duration: - Maximum Duration: + Максимальная длительность: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Длительность, во время которой будет показано уведомление (если не нажаты кнопки мыши) @@ -12229,77 +12229,77 @@ Do you still want to proceed? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Минимальная продолжительность, в течение которой будет отображаться уведомление (если не нажимаете на уведомление) Maximum Number of Notifications: - Maximum Number of Notifications: + Максимальное количество уведомлений: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Максимальное количество уведомлений, которые будут одновременно присутствовать на экране Notification width: - Notification width: + Ширина уведомления: Width of the notification in pixels - Width of the notification in pixels + Ширина уведомления в пикселях Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Любое открытое ненавязчивое уведомление исчезнет, когда другое окно будет активировано Hide when other window is activated - Hide when other window is activated + Скрывать, когда другое окно активировано Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Запретить ненавязчивым уведомлениям появляться, когда окно FreeCAD не является активным окном Do not show when inactive - Do not show when inactive + Не показывать, когда неактивен Message List - Message List + Список сообщений Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Ограничить количество сообщений, которые будут храниться в списке. Если 0 нет ограничений. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Максимальное количество сообщений (0 = без ограничений): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Удаляет пользовательские уведомления из списка сообщений по истечении максимальной продолжительности ненавязчивых сообщений. Auto-remove User Notifications - Auto-remove User Notifications + Автоудаление уведомлений пользователя Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Активация области уведомлений вступает в силу только после перезапуска приложения. @@ -12313,13 +12313,13 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Вы можете изменить порядок верстаков, перетащив их. Дополнительные рабочие места можно установить через менеджер надстроек.</p><p> +В настоящее время в вашей системе есть следующие рабочие места:</p></body></html> Start up workbench: - Start up workbench: + Запустить рабочий этап: @@ -12366,7 +12366,7 @@ after FreeCAD launches Planes - Planes + Плоскости @@ -12399,12 +12399,12 @@ after FreeCAD launches Image plane settings - Image plane settings + Настройки плоскости изображения Planes - Planes + Плоскости @@ -12434,27 +12434,27 @@ after FreeCAD launches X distance: - X distance: + Расстояние по Х: Y distance: - Y distance: + Расстояние по Х: Rotation : - Rotation : + Вращение : Transparency : - Transparency : + Прозрачность : Image size - Image size + Размер изображения @@ -12469,12 +12469,12 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + Сохранять пропорции Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Интерактивное масштабирование изображения, задание длины между двумя точками изображения. @@ -12484,7 +12484,7 @@ after FreeCAD launches Calibration - Calibration + Калибровка @@ -12502,7 +12502,7 @@ after FreeCAD launches Color Gradient - Color Gradient + Цветной градиент @@ -12510,27 +12510,27 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Если флажок не установлен, %1 не будет отображаться на рабочих столах. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Это текущий модуль запуска и должен быть автоматически загружен. Смотрите Настройки/Общее/Автозагрузка для изменения. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Ярлык для активации этого верстака. Auto-load - Auto-load + Автозагрузка If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Если отмечено, %1 будет загружен автоматически при запуске FreeCAD @@ -12550,7 +12550,7 @@ after FreeCAD launches To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Для сохранения ресурсов FreeCAD не загружает рабочие столы до тех пор, пока они не используются. Загрузка может обеспечить доступ к дополнительным настройкам, связанным с их функциональностью. @@ -12576,7 +12576,7 @@ after FreeCAD launches Color Legend - Color Legend + Цветовая легенда @@ -12589,12 +12589,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Удалить уведомления пользователя Delete All - Delete All + Удалить всё @@ -12602,12 +12602,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Удалить уведомления пользователя Delete All - Delete All + Удалить всё @@ -12615,17 +12615,17 @@ after FreeCAD launches Failed to load image file - Failed to load image file + Не удалось загрузить изображение Cannot load file %1: %2 - Cannot load file %1: %2 + Не удается загрузить файл %1: %2 Fit to window - Fit to window + По размерам окна @@ -12643,13 +12643,13 @@ after FreeCAD launches Load image... - Load image... + Загрузить изображение... Loads an image - Loads an image + Загружает изображение @@ -12657,32 +12657,32 @@ after FreeCAD launches FRONT - FRONT + Спереди REAR - REAR + Сзади TOP - TOP + Сверху BOTTOM - BOTTOM + Снизу RIGHT - RIGHT + Справа LEFT - LEFT + Слева @@ -12690,7 +12690,7 @@ after FreeCAD launches Enter desired distance between the points - Enter desired distance between the points + Введите желаемое расстояние между точками diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index e566579a9e..3ed5a40e3e 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Uredi sliko @@ -1240,7 +1240,7 @@ Neglede na to ima lastnost v skriptih še vedno polni naziv, kot npr. "obj.Ime_S To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Če želite spremeniti trenutno bližnjico, vnesite novo v sponje polje in pritisnite "Dodeli". @@ -2001,12 +2001,12 @@ makrov, kjer bo pika/vejica vedno natisnjena. Language and number format - Language and number format + Jezik in oblika zapisa števil Language: - Language: + Jezik: @@ -2016,7 +2016,7 @@ makrov, kjer bo pika/vejica vedno natisnjena. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Merski sistem, ki naj se uporablja v celotnem programu @@ -2041,7 +2041,7 @@ makrov, kjer bo pika/vejica vedno natisnjena. Substitute decimal separator - Substitute decimal separator + Zamenjaj decimalni ločilnik @@ -2086,14 +2086,14 @@ Prilagodite jo lahko glede na velikost zaslona ali po lastnem okusu Size of recent file list: - Size of recent file list: + Velikost seznama nedavnih datotek: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Ozadje glavnega okna bo, (ko ni odprt noben dokument) tlakovano s posebno sliko. +Za podrobnosti o sliki si oglejte FreeCAD Wiki. @@ -2855,7 +2855,7 @@ Navedite drugo mapo. Restart required - Restart required + Potreben pozagon @@ -3031,12 +3031,12 @@ Navedite drugo mapo. Failed to extract project - Failed to extract project + Projekta ni mogoče izvleči Failed to create project - Failed to create project + Projekta ni mogoče ustvariti @@ -5001,8 +5001,8 @@ ukazni mizi, se prelomijo Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Površina pri izbiranju v trirazsežnem pogledu. +Pri večjih vrednostih je izbiranje lažje, vendar pa je lahko zaradi tega izbiranje drobnih reči nemogoče. @@ -5093,24 +5093,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Premi preliv Radial gradient - Radial gradient + Krožni preliv Top: - Top: + Zgoraj: Middle: - Middle: + Sredina: @@ -5136,7 +5136,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Spodaj: @@ -5166,17 +5166,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Središčno: Midway: - Midway: + Na polovici: End: - End: + Konec: @@ -6215,7 +6215,7 @@ izbrani pred odprtjem tega pogovrnega okna Critical messages - Critical messages + Ključna sporočila @@ -8016,22 +8016,22 @@ Ali želite navesti drugo mapo? Show items hidden in tree view - Show items hidden in tree view + Prikaži predmete, skrite v drevesnem pogledu Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Prikaži predmete, ki so v drevesnem pogledu označeni kot "skriti" Toggle visibility in tree view - Toggle visibility in tree view + Preklopi vidnost v drevesnem pogledu Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Preklopi vidnost izbranih predmetov v drevesnem pogledu @@ -8670,7 +8670,7 @@ Ali želite nadaljevati? Save image - Save image + Shrani sliko @@ -8787,18 +8787,18 @@ Ali želite nadaljevati? Notifier - Notifier + Obvestilnik Message - Message + Sporočilo Notifier: - Notifier: + Obvestilnik: @@ -8813,7 +8813,7 @@ Ali želite nadaljevati? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Preveč odprtih nevsivljivih obvestil. Obvestila so prezrta! @@ -9362,7 +9362,7 @@ bodo izgubljene. Change image... - Change image... + Zamenjaj sliko ... @@ -11746,7 +11746,7 @@ bodo izgubljene. Save image... - Save image... + Shrani sliko ... @@ -12049,7 +12049,7 @@ Ali želite vseeno nadaljevati? Clipboard - Clipboard + Odložišče @@ -12166,7 +12166,7 @@ Ali želite vseeno nadaljevati? Notification Area - Notification Area + Obvestišče @@ -12176,32 +12176,32 @@ Ali želite vseeno nadaljevati? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Obvestišče se bo pojavilo v vrstici stanja Enable Notification Area - Enable Notification Area + Omogoči obvestišče Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Nevsiljiva ovestila bodo prikazana polega obvestišča v vrstici stanja Enable non-intrusive notifications - Enable non-intrusive notifications + Omogoči nevsiljiva obvestila Additional data Sources - Additional data Sources + Dodatni viri podatkov Errors will appear in the notification area - Errors will appear in the notification area + Napake bodo prikazane v obvestišču @@ -12211,7 +12211,7 @@ Ali želite vseeno nadaljevati? Warnings will appear in the notification area - Warnings will appear in the notification area + Opozorila bodo prikazana v obvestišči @@ -12221,22 +12221,22 @@ Ali želite vseeno nadaljevati? Non-Intrusive Notifications - Non-Intrusive Notifications + Nevsiljiva obvestila Minimum Duration: - Minimum Duration: + Najkrajše trajanje: Maximum Duration: - Maximum Duration: + Najdaljše trajanje: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Trajanje prikazovanja obvestila (razen pri kliku z miškinimi gumbi) @@ -12247,77 +12247,77 @@ Ali želite vseeno nadaljevati? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Najkrajše trajanje prikazovanja obvestila (razen, če kliknete na obvestilo) Maximum Number of Notifications: - Maximum Number of Notifications: + Največje število obvestil: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Največje število istočasno prikazanih obvestil Notification width: - Notification width: + Širina obvestil: Width of the notification in pixels - Width of the notification in pixels + Širina obvestila v slikovnih točkah Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Vsa nevsiljiva obvestila se bodo ob izbiri drugega okna zaprla Hide when other window is activated - Hide when other window is activated + Skrij, ko se omogoči drugo okno Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Prepreči pojavljanje nevsiljivih opozoril, ko FreeCAD-ovo okno ni dejavno Do not show when inactive - Do not show when inactive + Ne prikaži ob nedejavnosti Message List - Message List + Seznam sporočil Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Omeji število v seznamu shranjenih sporočil. Nič pomeni brez omejitve. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Največ sporočil (0=brez omejitve): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Odstrani s seznama sporočil uporabniška obvestila, ko preteče najdaljše trajanje nevsiljivih sporočil. Auto-remove User Notifications - Auto-remove User Notifications + Samoodstranitev uporabniških obvestil Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Omogočenje obvestišča stopi v veljavo šele po pozagonu programa. @@ -12331,13 +12331,13 @@ Ali želite vseeno nadaljevati? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Delovna okolja lahko prerazporeditev s povleci-spusti. Dodatna delovna okolje je mogoče namestiti preko upravljalnika dodatkov.</p><p> +Trenutno ima vaš sistem naslednja delovna okolja:</p></body></html> Start up workbench: - Start up workbench: + Začetno delovno okolje: @@ -12385,7 +12385,7 @@ ob zagodu FreeCAD-a Planes - Planes + Ravnine @@ -12418,12 +12418,12 @@ ob zagodu FreeCAD-a Image plane settings - Image plane settings + Nastavitve ravnine slike Planes - Planes + Ravnine @@ -12453,27 +12453,27 @@ ob zagodu FreeCAD-a X distance: - X distance: + Razdalja x: Y distance: - Y distance: + Razdalja y: Rotation : - Rotation : + Zasuk : Transparency : - Transparency : + Prozornost : Image size - Image size + Velikost slike @@ -12488,12 +12488,12 @@ ob zagodu FreeCAD-a Keep aspect ratio - Keep aspect ratio + Ohrani razmerje stranic Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Sodejno prevelikostenje slike z določitvijo razdalje med dvema točkama slike. @@ -12503,7 +12503,7 @@ ob zagodu FreeCAD-a Calibration - Calibration + Umerjanje @@ -12521,7 +12521,7 @@ ob zagodu FreeCAD-a Color Gradient - Color Gradient + Barvni preliv @@ -12529,27 +12529,27 @@ ob zagodu FreeCAD-a If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Če je odznačeno, %1 ne bo prikazan v razpoložljivih delovnih okoljih. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Takšen je trenutni začetni modul, ki mora biti omogočen. Če želite to spremeniti, pojdite ne Prednastavitve/Splošno/Samodejno nalaganje. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Bližnjica za omogočanje tega delovnega okolja. Auto-load - Auto-load + Samodejno nalaganje If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Če je označeno, bo %1 samodejno naložen ob zagonu FreeCADa @@ -12569,7 +12569,7 @@ ob zagodu FreeCAD-a To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Zaradi varčevanja z viri FreeCAD ne naloži delovnih okolij, dokler se jih ne uporabi. Če jih naložite, vam bodo lahko na voljo dodatne prednastavitve, ki so povezane z njihovimi zmožnostmi. @@ -12595,7 +12595,7 @@ ob zagodu FreeCAD-a Color Legend - Color Legend + Legenda barv @@ -12608,12 +12608,12 @@ ob zagodu FreeCAD-a Delete user notifications - Delete user notifications + Izbriši uporabniška obvestila Delete All - Delete All + Izbriši vse @@ -12621,12 +12621,12 @@ ob zagodu FreeCAD-a Delete user notifications - Delete user notifications + Izbriši uporabniška obvestila Delete All - Delete All + Izbriši vse @@ -12634,7 +12634,7 @@ ob zagodu FreeCAD-a Failed to load image file - Failed to load image file + Ni bilo mogoče naložiti slikovne datoteke diff --git a/src/Gui/Language/FreeCAD_sr-CS.ts b/src/Gui/Language/FreeCAD_sr-CS.ts index d7eecaf4ad..f8d1fd2e74 100644 --- a/src/Gui/Language/FreeCAD_sr-CS.ts +++ b/src/Gui/Language/FreeCAD_sr-CS.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Uredi sliku @@ -1240,7 +1240,7 @@ Ako ovo nije označeno, osobina mora imati jedinstveno ime i pristupa mu se kao To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Da bi promenio trenutnu prečicu, unesi novu prečicu u polje ispod i pritisni 'Dodeli'. @@ -2001,12 +2001,12 @@ tačka/zarez uvek biti štampani. Language and number format - Language and number format + Jezik i format broja Language: - Language: + Jezik: @@ -2016,7 +2016,7 @@ tačka/zarez uvek biti štampani. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Sistem mernih jedinica koji treba da se koristi za sve delove aplikacije @@ -2041,7 +2041,7 @@ tačka/zarez uvek biti štampani. Substitute decimal separator - Substitute decimal separator + Zameni decimalni separator @@ -2086,14 +2086,14 @@ prema veličini ekrana ili ličnom ukusu Size of recent file list: - Size of recent file list: + Veličina liste nedavno otvaranih datoteka: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Pozadina glavnog prozora (kada nijedan dokument nije otvoren) će biti popločana posebnom slikom. +Pogledaj FreeCAD Wiki za detalje o slici. @@ -2854,7 +2854,7 @@ Navedi neku drugu fasciklu. Restart required - Restart required + Potrebno je ponovo pokrenuti sistem @@ -3030,12 +3030,12 @@ Navedi neku drugu fasciklu. Failed to extract project - Failed to extract project + Ekstrakcija projekta nije uspela Failed to create project - Failed to create project + Nije uspelo stvaranje projekta @@ -4995,8 +4995,8 @@ horizontalni prostor u Python konzoli Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Oblast za biranje elemenata u 3D pogledu. +Veća vrednost olakšava odabir stvari, ali može onemogućiti odabir malih stvari. @@ -5087,24 +5087,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Linearno prelivanje boja Radial gradient - Radial gradient + Radijalno prelivanje boja Top: - Top: + Gornja: Middle: - Middle: + Srednja: @@ -5130,7 +5130,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Donja: @@ -6211,7 +6211,7 @@ izabranim objektima pre otvaranja ovog dijaloga Critical messages - Critical messages + Kritične poruke @@ -8012,22 +8012,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Prikaži sakrivene stavke u stablu dokumenta Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Prikaži stavke koje su u stablu dokumenta označene kao 'sakrivene' Toggle visibility in tree view - Toggle visibility in tree view + Uključi/isključi vidljivost u stablu dokumenta Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Uključi/isključi vidljivost izabranih stavki u stablu dokumenta @@ -8666,7 +8666,7 @@ Da li želiš da nastaviš? Save image - Save image + Sačuvaj sliku @@ -8783,18 +8783,18 @@ Da li želiš da nastaviš? Notifier - Notifier + Obaveštavač Message - Message + Poruka Notifier: - Notifier: + Obaveštavač: @@ -8809,7 +8809,7 @@ Da li želiš da nastaviš? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Previše otvorenih nenametljivih obaveštenja. Obaveštenja se izostavljaju! @@ -9358,7 +9358,7 @@ the current copy will be lost. Change image... - Change image... + Promeni sliku... @@ -9973,7 +9973,7 @@ the current copy will be lost. Link actions - Radnje sa vezama + Radnje sa sponama @@ -10059,13 +10059,13 @@ the current copy will be lost. Link navigation - Navigacija vezama + Navigacija sponama Link navigation actions - Radnje navigacije vezama + Radnje navigacije sponama @@ -11742,7 +11742,7 @@ the current copy will be lost. Save image... - Save image... + Sačuvaj sliku... @@ -12045,7 +12045,7 @@ Da li i dalje želiš da nastaviš? Clipboard - Clipboard + Privremena memorija @@ -12140,7 +12140,7 @@ Da li i dalje želiš da nastaviš? Link actions - Radnje sa vezama + Radnje sa sponama @@ -12162,7 +12162,7 @@ Da li i dalje želiš da nastaviš? Notification Area - Notification Area + Oblast za obaveštenja @@ -12172,32 +12172,32 @@ Da li i dalje želiš da nastaviš? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Oblast za obaveštenja će se pojaviti na statusnoj traci Enable Notification Area - Enable Notification Area + Omogući oblast za obaveštenja Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Nenametljiva obaveštenja će se pojaviti pored oblasti za obaveštenja na statusnoj traci Enable non-intrusive notifications - Enable non-intrusive notifications + Omogući nenametljiva obaveštenja Additional data Sources - Additional data Sources + Dodatni izvori podataka Errors will appear in the notification area - Errors will appear in the notification area + Greške će se pojaviti u oblasti za obaveštenja @@ -12207,7 +12207,7 @@ Da li i dalje želiš da nastaviš? Warnings will appear in the notification area - Warnings will appear in the notification area + Upozorenja će se pojaviti u oblasti za obaveštenja @@ -12217,22 +12217,22 @@ Da li i dalje želiš da nastaviš? Non-Intrusive Notifications - Non-Intrusive Notifications + Nenametljiva obaveštenja Minimum Duration: - Minimum Duration: + Minimalno trajanje: Maximum Duration: - Maximum Duration: + Maksimalno trajanje: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Vremenski period tokom kojeg će se obaveštenje prikazivati (osim ako se ne klikne na tastere miša) @@ -12243,77 +12243,77 @@ Da li i dalje želiš da nastaviš? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Minimalni vremenski period tokom kojeg će se obaveštenje prikazivati (osim ako se ne klikne na obaveštenje) Maximum Number of Notifications: - Maximum Number of Notifications: + Maksimalan broj obaveštenja: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Maksimalan broj obaveštenja koja će istovremeno biti prikazana na ekranu Notification width: - Notification width: + Širina obaveštenja: Width of the notification in pixels - Width of the notification in pixels + Širina obaveštenja u pikselima Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Sva otvorena nenametljiva obaveštenja će nestati kada se aktivira drugi prozor Hide when other window is activated - Hide when other window is activated + Sakrij kada se aktivira drugi prozor Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Spreči pojavljivanje nenametljivih obaveštenja kada FreeCAD prozor nije aktivan prozor Do not show when inactive - Do not show when inactive + Ne prikazuj kada je neaktivan Message List - Message List + Lista Poruka Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Ograničite broj poruka koje će se nalaziti u listi. Ako je 0, nema ograničenja. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Maksimalan broj poruka (0 = bez ograničenja): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Uklanja korisnička obaveštenja sa liste poruka nakon što istekne maksimalni nenametljivi vremenski period. Auto-remove User Notifications - Auto-remove User Notifications + Automatsko uklanjanje korisničkih obaveštenja Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Aktivacija oblasti za obaveštenja stupa na snagu tek nakon ponovnog pokretanja aplikacije. @@ -12327,13 +12327,13 @@ Da li i dalje želiš da nastaviš? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Možete da promenite redosled radnih okruženja prevlačenjem. Dodatna radna okruženja se mogu instalirati pomću Menadžera dodataka.</p><p> +Trenutno tvoj sistem ima sledeća radna okruženja:</p></body></html> Start up workbench: - Start up workbench: + Pokreni radno okruženje: @@ -12381,7 +12381,7 @@ nakon pokretanja FreeCAD-a Planes - Planes + Ravni @@ -12401,7 +12401,7 @@ nakon pokretanja FreeCAD-a Reverse direction - Reverse direction + Obrni smer @@ -12414,12 +12414,12 @@ nakon pokretanja FreeCAD-a Image plane settings - Image plane settings + Podešavanja slike na ravni Planes - Planes + Ravni @@ -12439,7 +12439,7 @@ nakon pokretanja FreeCAD-a Reverse direction - Reverse direction + Obrni smer @@ -12449,27 +12449,27 @@ nakon pokretanja FreeCAD-a X distance: - X distance: + X rastojanje: Y distance: - Y distance: + Y rastojanje: Rotation : - Rotation : + Rotacija : Transparency : - Transparency : + Providnost : Image size - Image size + Veličina slike @@ -12484,12 +12484,12 @@ nakon pokretanja FreeCAD-a Keep aspect ratio - Keep aspect ratio + Zadrži srazmeru Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Skaliraj sliku zadavanjem rastojanja pomoću dve izabrane tačke na slici. @@ -12499,7 +12499,7 @@ nakon pokretanja FreeCAD-a Calibration - Calibration + Kalibracija @@ -12517,7 +12517,7 @@ nakon pokretanja FreeCAD-a Color Gradient - Color Gradient + Prelivanje boja @@ -12525,27 +12525,27 @@ nakon pokretanja FreeCAD-a If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Ako nije čekirano, %1 se neće pojaviti u dostupnim radnim okruženjima. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Ovo je trenutni modul za pokretanje i mora biti omogućen. Pogledajte Podešavanja/Opšte/Automatsko učitavanje ako želiš da promeniš. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Prečica za aktiviranje ovog radnog okruženja. Auto-load - Auto-load + Automatsko učitavanje If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Ako je čekirano, %1 će se automatski učitati kada se FreeCAD pokrene @@ -12565,7 +12565,7 @@ nakon pokretanja FreeCAD-a To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Da bi sačuvao resurse, FreeCAD ne učitava radna okruženja dok se ne koriste. Njihovo učitavanje može da omogući pristup dodatnim podešavanjima koja se odnose na njihovu funkcionalnost. @@ -12591,7 +12591,7 @@ nakon pokretanja FreeCAD-a Color Legend - Color Legend + Legenda boja @@ -12604,12 +12604,12 @@ nakon pokretanja FreeCAD-a Delete user notifications - Delete user notifications + Izbriši korisnička obaveštenja Delete All - Delete All + Obriši sve @@ -12617,12 +12617,12 @@ nakon pokretanja FreeCAD-a Delete user notifications - Delete user notifications + Izbriši korisnička obaveštenja Delete All - Delete All + Obriši sve @@ -12630,17 +12630,17 @@ nakon pokretanja FreeCAD-a Failed to load image file - Failed to load image file + Nijе uspеlo učitavanjе slikе Cannot load file %1: %2 - Cannot load file %1: %2 + Nije moguće učitati datoteku %1: %2 Fit to window - Fit to window + Uklopi u prozor @@ -12658,13 +12658,13 @@ nakon pokretanja FreeCAD-a Load image... - Load image... + Učitaj sliku... Loads an image - Loads an image + Učitavanje slike @@ -12672,32 +12672,32 @@ nakon pokretanja FreeCAD-a FRONT - FRONT + Spreda REAR - REAR + Straga TOP - TOP + Odozgo BOTTOM - BOTTOM + Odozdo RIGHT - RIGHT + Sdesna LEFT - LEFT + Sleva @@ -12705,7 +12705,7 @@ nakon pokretanja FreeCAD-a Enter desired distance between the points - Enter desired distance between the points + Unesi željeno rastojanje između tačaka diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 7b020ded8d..01dae500a5 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Уреди слику @@ -1240,7 +1240,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Да би променио тренутну пречицу, унеси нову пречицу у поље испод и притисни 'Додели'. @@ -2001,12 +2001,12 @@ dot/period will always be printed. Language and number format - Language and number format + Језик и формат броја Language: - Language: + Језик: @@ -2016,7 +2016,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Систем мерних јединица који треба да се користи за све делове апликације @@ -2041,7 +2041,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + Замени децимални сепаратор @@ -2086,14 +2086,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + Величина листе недавнo отвараних датотека: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + Озадина главног прозора (када ниједан документ није отворен) ће бити поплочана посебном сликом. +Погледај FreeCAD Wiki за детаље о слици. @@ -2854,7 +2854,7 @@ Specify another directory, please. Restart required - Restart required + Потребно је поново покренути систем @@ -3030,12 +3030,12 @@ Specify another directory, please. Failed to extract project - Failed to extract project + Екстракција пројекта није успела Failed to create project - Failed to create project + Није успело стварање пројекта @@ -4995,8 +4995,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + Област за бирање елемената у 3Д погледу. +Већа вредност олакшава одабир ствари, али може онемогућити одабир малих ствари. @@ -5087,24 +5087,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + Линеарно преливање боја Radial gradient - Radial gradient + Радијално преливање боја Top: - Top: + Горња: Middle: - Middle: + Средња: @@ -5130,7 +5130,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Доња: @@ -6211,7 +6211,7 @@ originally selected prior to opening this dialog Critical messages - Critical messages + Критичне поруке @@ -8012,22 +8012,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + Прикажи сакривене ставке у стаблу документа Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Прикажи ставке које су у стаблу документа означене као 'сакривене' Toggle visibility in tree view - Toggle visibility in tree view + Укључи/искључи видљивост у стаблу документа Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Укључи/искључи видљивост изабраних ставки у стаблу документа @@ -8666,7 +8666,7 @@ Do you want to continue? Save image - Save image + Сачувај слику @@ -8783,18 +8783,18 @@ Do you want to continue? Notifier - Notifier + Обавештавач Message - Message + Порука Notifier: - Notifier: + Обавештавач: @@ -8809,7 +8809,7 @@ Do you want to continue? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + Превише отворених ненаметљивих обавештења. Обавештења се изостављају! @@ -9358,7 +9358,7 @@ the current copy will be lost. Change image... - Change image... + Промени слику... @@ -9973,7 +9973,7 @@ the current copy will be lost. Link actions - Радње са везама + Радње са спонама @@ -10059,13 +10059,13 @@ the current copy will be lost. Link navigation - Навигација везама + Навигација спонама Link navigation actions - Радње навигације везама + Радње навигације спонама @@ -11742,7 +11742,7 @@ the current copy will be lost. Save image... - Save image... + Сачувај слику... @@ -12045,7 +12045,7 @@ Do you still want to proceed? Clipboard - Clipboard + Привремена меморија @@ -12140,7 +12140,7 @@ Do you still want to proceed? Link actions - Радње са везама + Радње са спонама @@ -12162,7 +12162,7 @@ Do you still want to proceed? Notification Area - Notification Area + Област за обавештења @@ -12172,32 +12172,32 @@ Do you still want to proceed? The Notification area will appear in the status bar - The Notification area will appear in the status bar + Област за обавештења ће се појавити на статусној траци Enable Notification Area - Enable Notification Area + Омогући област за обавештења Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + Ненаметљива обавештења ће се појавити поред области за обавештења на статусној траци Enable non-intrusive notifications - Enable non-intrusive notifications + Омогући ненаметљива обавештења Additional data Sources - Additional data Sources + Додатни извори података Errors will appear in the notification area - Errors will appear in the notification area + Грешке ће се појавити у области за обавештења @@ -12207,7 +12207,7 @@ Do you still want to proceed? Warnings will appear in the notification area - Warnings will appear in the notification area + Упозорења ће се појавити у области за обавештења @@ -12217,22 +12217,22 @@ Do you still want to proceed? Non-Intrusive Notifications - Non-Intrusive Notifications + Ненаметљива обавештења Minimum Duration: - Minimum Duration: + Минимално трајање: Maximum Duration: - Maximum Duration: + Максимално трајање: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + Временски период током којег ће се обавештење приказивати (осим ако се не кликне на тастере миша) @@ -12243,77 +12243,77 @@ Do you still want to proceed? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + Минимални временски период током којег ће се обавештење приказивати (осим ако се не кликне на обавештење) Maximum Number of Notifications: - Maximum Number of Notifications: + Максималан број обавештења: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + Максималан број обавештења која ће истовремено бити приказана на екрану Notification width: - Notification width: + Ширина обавештења: Width of the notification in pixels - Width of the notification in pixels + Ширина обавештења у пикселима Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + Сва отворена ненаметљива обавештења ће нестати када се активира други прозор Hide when other window is activated - Hide when other window is activated + Сакриј када се активира други прозор Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + Спречи појављивање ненаметљивих обавештења када FreeCAD прозор није активан прозор Do not show when inactive - Do not show when inactive + Не приказуј када је неактиван Message List - Message List + Листа Порука Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Ограничите број порука које ће се налазити у листи. Ако је 0, нема ограничења. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Максималан број порука (0 = без ограничења): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + Уклања корисничка обавештења са листе порука након што истекне максимални ненаметљиви временски период. Auto-remove User Notifications - Auto-remove User Notifications + Аутоматско уклањање корисничких обавештења Activation of the Notification Area only takes effect after an application restart. - Activation of the Notification Area only takes effect after an application restart. + Активација области за обавештења ступа на снагу тек након поновног покретања апликације. @@ -12327,13 +12327,13 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Можете да промените редослед радних окружења превлачењем. Додатна радна окружења се могу инсталирати помћу Менаџера додатака.</p><p> +Тренутно твој систем има следећа радна окружења:</p></body></html> Start up workbench: - Start up workbench: + Покрени радно окружење: @@ -12381,7 +12381,7 @@ after FreeCAD launches Planes - Planes + Равни @@ -12401,7 +12401,7 @@ after FreeCAD launches Reverse direction - Reverse direction + Обрни смер @@ -12414,12 +12414,12 @@ after FreeCAD launches Image plane settings - Image plane settings + Подешавања слике на равни Planes - Planes + Равни @@ -12439,7 +12439,7 @@ after FreeCAD launches Reverse direction - Reverse direction + Обрни смер @@ -12449,27 +12449,27 @@ after FreeCAD launches X distance: - X distance: + X растојање: Y distance: - Y distance: + Y растојање: Rotation : - Rotation : + Ротација : Transparency : - Transparency : + Провидност : Image size - Image size + Величина слике @@ -12484,12 +12484,12 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + Задржи сразмеру Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Скалирај слику задавањем растојања помоћу две изабране тачке на слици. @@ -12499,7 +12499,7 @@ after FreeCAD launches Calibration - Calibration + Калибрација @@ -12517,7 +12517,7 @@ after FreeCAD launches Color Gradient - Color Gradient + Преливање боја @@ -12525,27 +12525,27 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Ако није чекирано, %1 се неће појавити у доступним радним окружењима. This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. - This is the current startup module, and must be enabled. See Preferences/General/Autoload to change. + Ово је тренутни модул за покретање и мора бити омогућен. Погледајте Подешавања/Опште/Аутоматско учитавање ако желиш да промениш. Shortcut to activate this workbench. - Shortcut to activate this workbench. + Пречица за активирање овог радног окружења. Auto-load - Auto-load + Аутоматско учитавање If checked, %1 will be loaded automatically when FreeCAD starts up - If checked, %1 will be loaded automatically when FreeCAD starts up + Ако је чекирано, %1 ће се аутоматски учитати када се FreeCAD покрене @@ -12565,7 +12565,7 @@ after FreeCAD launches To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. - To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. + Да би сачувао ресурсе, FreeCAD не учитава радна окружења док се не користе. Њихово учитавање може да омогући приступ додатним подешавањима која се односе на њихову функционалност. @@ -12591,7 +12591,7 @@ after FreeCAD launches Color Legend - Color Legend + Легенда боја @@ -12604,12 +12604,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Избриши корисничка обавештења Delete All - Delete All + Обриши све @@ -12617,12 +12617,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Избриши корисничка обавештења Delete All - Delete All + Обриши све @@ -12630,17 +12630,17 @@ after FreeCAD launches Failed to load image file - Failed to load image file + Није успело учитавање слике Cannot load file %1: %2 - Cannot load file %1: %2 + Није могуће учитати датотеку %1: %2 Fit to window - Fit to window + Уклопи у прозор @@ -12658,13 +12658,13 @@ after FreeCAD launches Load image... - Load image... + Учитај слику... Loads an image - Loads an image + Учитавање слике @@ -12672,32 +12672,32 @@ after FreeCAD launches FRONT - FRONT + Спреда REAR - REAR + Страга TOP - TOP + Одозго BOTTOM - BOTTOM + Одоздо RIGHT - RIGHT + Сдесна LEFT - LEFT + Слева @@ -12705,7 +12705,7 @@ after FreeCAD launches Enter desired distance between the points - Enter desired distance between the points + Унеси жељено растојање између тачака diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 3cc1ddccbb..ae23ef9947 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Redigera bild @@ -1239,7 +1239,7 @@ Om detta inte väljs måste egenskapen vara unikt namngiven och den nås som 'ob To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + För att ändra en aktuell genväg anger du den nya genvägen i fältet nedan och trycker på 'Tilldela'. @@ -2005,7 +2005,7 @@ dot/period will always be printed. Language: - Language: + Språk: @@ -5102,13 +5102,13 @@ Larger value eases to pick things, but can make small features impossible to sel Top: - Top: + Topp: Middle: - Middle: + Mitt: @@ -5134,7 +5134,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + Nederst: @@ -5164,17 +5164,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + Central: Midway: - Midway: + Halvvägs: End: - End: + Slut: @@ -6213,7 +6213,7 @@ som ursprungligen valts innan du öppnar denna dialogruta Critical messages - Critical messages + Kritiska meddelanden @@ -8014,22 +8014,22 @@ Vill du ange en annan katalog? Show items hidden in tree view - Show items hidden in tree view + Visa objekt dolda i trädvyn Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + Visa objekt som är markerade som 'dolda' i trädvyn Toggle visibility in tree view - Toggle visibility in tree view + Växla synlighet i trädvyn Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + Växlar synligheten för markerade objekt i trädvyn @@ -8668,7 +8668,7 @@ vill du fortsätta? Save image - Save image + Spara bild @@ -8785,18 +8785,18 @@ vill du fortsätta? Notifier - Notifier + Notifierare Message - Message + Meddelande Notifier: - Notifier: + Notifierare: @@ -8811,7 +8811,7 @@ vill du fortsätta? Too many opened non-intrusive notifications. Notifications are being omitted! - Too many opened non-intrusive notifications. Notifications are being omitted! + För många öppnade icke-störande meddelanden. Meddelanden utelämnas! @@ -9360,7 +9360,7 @@ the current copy will be lost. Change image... - Change image... + Ändra bild... @@ -11744,7 +11744,7 @@ the current copy will be lost. Save image... - Save image... + Spara bild... @@ -12045,7 +12045,7 @@ Vill du fortfarande fortsätta? Clipboard - Clipboard + Urklipp @@ -12162,7 +12162,7 @@ Vill du fortfarande fortsätta? Notification Area - Notification Area + Aviseringsområde @@ -12464,12 +12464,12 @@ vid start av FreeCAD Transparency : - Transparency : + Transparens: Image size - Image size + Bildstorlek @@ -12484,12 +12484,12 @@ vid start av FreeCAD Keep aspect ratio - Keep aspect ratio + Behåll bildförhållande Interactively scale the image by setting a length between two points of the image. - Interactively scale the image by setting a length between two points of the image. + Skala bilden interaktivt genom att ange en längd mellan två punkter på bilden. @@ -12499,7 +12499,7 @@ vid start av FreeCAD Calibration - Calibration + Kalibrering @@ -12517,7 +12517,7 @@ vid start av FreeCAD Color Gradient - Color Gradient + Färggradient @@ -12540,7 +12540,7 @@ vid start av FreeCAD Auto-load - Auto-load + Läs in automatiskt @@ -12658,13 +12658,13 @@ vid start av FreeCAD Load image... - Load image... + Läs in bild... Loads an image - Loads an image + Läser in bild diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 9bb133f8e4..0ee25a30a8 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -216,7 +216,7 @@ Edit image - Edit image + Редагувати зображення @@ -1240,7 +1240,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + Щоб змінити поточний ярлик, введіть новий ярлик в поле нижче і натисніть "Призначити". @@ -2001,12 +2001,12 @@ dot/period will always be printed. Language and number format - Language and number format + Мовний та числовий формат Language: - Language: + Мова: @@ -2016,7 +2016,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + Система одиниць вимірювання, яку слід використовувати для всіх частин програми @@ -2041,7 +2041,7 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + Замінник десяткового роздільника @@ -8665,7 +8665,7 @@ Do you want to continue? Save image - Save image + Зберегти зображення @@ -8782,18 +8782,18 @@ Do you want to continue? Notifier - Notifier + Сповіщення Message - Message + Повідомлення Notifier: - Notifier: + Сповіщення: @@ -9358,7 +9358,7 @@ the current copy will be lost. Change image... - Change image... + Змінити зображення... @@ -11742,7 +11742,7 @@ the current copy will be lost. Save image... - Save image... + Зберегти зображення... @@ -12045,7 +12045,7 @@ Do you still want to proceed? Clipboard - Clipboard + Буфер обміну @@ -12162,7 +12162,7 @@ Do you still want to proceed? Notification Area - Notification Area + Область сповіщень @@ -12288,17 +12288,17 @@ Do you still want to proceed? Message List - Message List + Список повідомлень Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + Обмежити кількість повідомлень, які будуть зберігатися у списку. Якщо 0, обмежень немає. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + Максимальна кількість повідомлень (0 = немає обмежень): @@ -12327,8 +12327,8 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>Ви можете змінити порядок робочих столів перетягуванням та скиданням. Додаткові робочі середовища можна встановити через менеджера доповнень.</p> +<p>Зараз ваша система має наступні робочі столи:</p></body></html> @@ -12459,17 +12459,17 @@ after FreeCAD launches Rotation : - Rotation : + Обертання : Transparency : - Transparency : + Прозорість : Image size - Image size + Розмір зображення @@ -12484,7 +12484,7 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + Зберігати пропорції @@ -12499,7 +12499,7 @@ after FreeCAD launches Calibration - Calibration + Калібрування @@ -12517,7 +12517,7 @@ after FreeCAD launches Color Gradient - Color Gradient + Градієнт кольору @@ -12525,7 +12525,7 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - If unchecked, %1 will not appear in the available workbenches. + Якщо вимкнено, то %1 не буде з'являтися в доступних робочих столах. @@ -12535,12 +12535,12 @@ after FreeCAD launches Shortcut to activate this workbench. - Shortcut to activate this workbench. + Ярлик, щоб активувати цей робочий стіл. Auto-load - Auto-load + Автоматичне завантаження @@ -12604,12 +12604,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Видалити сповіщення користувача Delete All - Delete All + Видалити все @@ -12617,12 +12617,12 @@ after FreeCAD launches Delete user notifications - Delete user notifications + Видалити сповіщення користувача Delete All - Delete All + Видалити все @@ -12630,12 +12630,12 @@ after FreeCAD launches Failed to load image file - Failed to load image file + Не вдалося завантажити файл зображення Cannot load file %1: %2 - Cannot load file %1: %2 + Не вдалося завантажити файл %1: %2 diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 9b18a5d06b..6f869d403f 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -8645,7 +8645,7 @@ Do you want to continue? Save image - Save image + 保存图像 @@ -12021,7 +12021,7 @@ Do you still want to proceed? Clipboard - Clipboard + 剪贴板 @@ -12138,7 +12138,7 @@ Do you still want to proceed? Notification Area - Notification Area + 通知区域 @@ -12356,7 +12356,7 @@ after FreeCAD launches Planes - Planes + 平面 @@ -12389,12 +12389,12 @@ after FreeCAD launches Image plane settings - Image plane settings + 图像平面设置 Planes - Planes + 平面 diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 2f157fd067..f9340fbcd4 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -122,32 +122,32 @@ Paste expressions - 貼上表示式 + 貼上表達式 Make link group - 建立鏈結群組 + 建立連結群組 Make link - 建立鏈結 + 建立連結 Make sub-link - 建立子鏈結 + 建立子連結 Import links - 匯入鏈結 + 匯入連結 Import all links - 匯入所有鏈結 + 匯入所有連結 @@ -162,7 +162,7 @@ Add a part - 新增部件 + 新增零件 @@ -190,12 +190,12 @@ Toggle array elements - Toggle array elements + 切換矩陣元素 Link Transform - 鏈結變形 + 連結變換 @@ -434,12 +434,12 @@ Enter an expression... - 請輸入表示式... + 請輸入表達式... Expression: - 表示式： + 表達式: @@ -452,7 +452,7 @@ Press a keyboard shortcut - 按鍵盤快捷鍵 + 按鍵盤快速鍵 @@ -465,7 +465,7 @@ Selected: - 已選： + 已選取: @@ -493,12 +493,12 @@ Movable object - 可移動物件 + 可移動物體 Fixed object - 固定物件 + 固定物體 @@ -514,7 +514,7 @@ %1 help files not found (%2). You might need to install the %1 documentation package. - %1 說明檔不存在 (%2)，您或許需要安裝 %1 套件。 + %1 說明檔不存在 (%2)，您或許需要安裝 %1 套件. @@ -529,7 +529,7 @@ Please wait until the AutoRecovery file has been saved... - 自動修復檔儲存中，請稍候 + 自動修復暫存檔儲存中，請稍候... @@ -537,7 +537,7 @@ Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -552,7 +552,7 @@ Scroll middle mouse button - 滾動滑鼠中鍵 + 滑鼠滾動中鍵 @@ -560,7 +560,7 @@ Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -610,7 +610,7 @@ while doing a left or right click and move the mouse up or down Rename object - 重新命名物件 + 重新命名物體 @@ -620,7 +620,7 @@ while doing a left or right click and move the mouse up or down Finish editing object - 完成編輯物件 + 完成編輯物體 @@ -634,7 +634,7 @@ while doing a left or right click and move the mouse up or down Version - 版本 + 發行版本 @@ -654,7 +654,7 @@ while doing a left or right click and move the mouse up or down Word size - 字型大小 + 系統架構 @@ -694,7 +694,7 @@ while doing a left or right click and move the mouse up or down Individuals Header for the list of individual people in the Credits list. - 個人 + 貢獻者 @@ -716,7 +716,7 @@ while doing a left or right click and move the mouse up or down This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - 此軟體使用開放原始碼元件，其版權及其他專屬權利屬於其各自擁有者： + 此軟體使用開放原始碼元件，其版權及其他專屬權利屬於其各自擁有者: @@ -734,17 +734,17 @@ while doing a left or right click and move the mouse up or down The cache directory %1 exceeds the size of %2. - 快取目錄 %1 超過 %2 的大小。 + 快取目錄 %1 超過 %2 的大小. Do you want to clear it now? - 請問您要清除掉嗎？ + 請問您要清除掉嗎? Warning: Please make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! - 警告：請確保這是唯一正在運行的 %1 實例，並且沒有打開任何文件，因為這可能會導致資料遺失！ + 警告: 請確保這是唯一正在執行的 %1 實例，並且沒有打開任何文件，因為這可能會導致資料遺失! @@ -765,7 +765,7 @@ while doing a left or right click and move the mouse up or down Camera settings - 相機視角設定 + 相機設定 @@ -933,7 +933,7 @@ while doing a left or right click and move the mouse up or down &Activate - 啟動(&A) + 啟用(&A) @@ -1086,12 +1086,12 @@ If this is not ticked, then the property must be uniquely named, and it is acces Pack already exists - 包已經存在。 + 包已經存在 A preference pack with that name already exists. Do you want to overwrite it? - 有此名稱之偏好設定包已存在。您要覆寫它嗎？ + 已存在具有該名稱的預設值內容. 你想覆蓋它嗎? @@ -1177,7 +1177,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Sorry, couldn't find macro file '%1'. - 抱歉，找不到巨集檔案 '%1'。 + 抱歉，找不到巨集檔案 '%1'. @@ -1187,7 +1187,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Please specify the macro first. - 請先指定巨集。 + 請先指定巨集. @@ -1199,7 +1199,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Please specify the menu text first. - 請先指定選項文字。 + 請先指定選項文字. @@ -1209,7 +1209,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Please select a macro item first. - 請先選擇一個巨集項目。 + 請先選擇一個巨集項目. @@ -1239,7 +1239,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + 要更改當前快捷鍵，請在下面的欄位中輸入新的快捷鍵，然後按'分配'. @@ -1271,7 +1271,7 @@ same time. The one with the highest priority will be triggered. Shortcut priority list: - Shortcut priority list: + 快速鍵優先列表: @@ -1328,7 +1328,7 @@ same time. The one with the highest priority will be triggered. Type to search... - Type to search... + 輸入以搜尋... @@ -1343,7 +1343,7 @@ same time. The one with the highest priority will be triggered. Shortcut - Shortcut + 快速鍵 @@ -1451,7 +1451,7 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">注意:</span> 下次載入適當的工作台時更改才會生效</p></body></html> @@ -1483,7 +1483,7 @@ same time. The one with the highest priority will be triggered. Toolbar name: - 工具列名稱： + 工具列名稱: @@ -1540,7 +1540,7 @@ same time. The one with the highest priority will be triggered. No Spaceball Present - 無顯示Spaceball + 無存在太空球 @@ -1548,12 +1548,12 @@ same time. The one with the highest priority will be triggered. Spaceball Buttons - Spaceball按鈕 + 太空球按鈕 No Spaceball Present - 無顯示Spaceball + 無存在太空球 @@ -1703,12 +1703,12 @@ same time. The one with the highest priority will be triggered. Neon GNC - Neon GNC + 霓虹 GNC Neon PHC - Neon PHC + 霓虹 PHC @@ -1786,7 +1786,7 @@ same time. The one with the highest priority will be triggered. The cursor shape will be a block - The cursor shape will be a block + 文字游標外型將會是區塊 @@ -1926,10 +1926,10 @@ same time. The one with the highest priority will be triggered. will be substituted with locale separator, except in Python Console and Macro Editor where a dot/period will always be printed. - If enabled, numerical keypad decimal separator -will be substituted with locale separator, except -in Python Console and Macro Editor where a -dot/period will always be printed. + 如果啟用，數字鍵盤小數點分隔符 +將替換為語系環境分隔符，除了 +在 Python 控制台和巨集編輯器中 +點/句點將始終顯示. @@ -1999,12 +1999,12 @@ dot/period will always be printed. Language and number format - Language and number format + 語系和數字格式 Language: - Language: + 語系: @@ -2014,7 +2014,7 @@ dot/period will always be printed. Unit system that should be used for all parts of the application - Unit system that should be used for all parts of the application + 應用於應用程式所有零件的單位系統 @@ -2029,7 +2029,7 @@ dot/period will always be printed. Minimum fractional inch: - 最小小數英寸: + 最小分數英寸: @@ -2039,12 +2039,12 @@ dot/period will always be printed. Substitute decimal separator - Substitute decimal separator + 替換小數點分隔字元 Application - 應用程式 + 文件內容 @@ -2083,14 +2083,14 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + 最近檔案清單大小: Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + 主視窗的背景(未開啟文件時)將由特殊圖像組成. +有關圖像的詳細信息，請參閱 FreeCAD Wiki. @@ -2110,7 +2110,7 @@ display the splash screen Manage preference packs - 管理偏好設定包 + 管理偏好設定套件 @@ -2160,7 +2160,7 @@ display the splash screen Preference Pack Name - 偏好設定包名稱 + 偏好設定套件名稱 @@ -2175,22 +2175,22 @@ display the splash screen Apply the %1 preference pack - 套用 %1 之偏好設定包 + 套用 %1 偏好設定套件 Choose a FreeCAD config file to import - 還擇一個 FreeCAD 設定檔以匯入 + 選擇要匯入的 FreeCAD 參數設定文件 File exists - 檔案已存在 + 該檔案已存在 A preference pack with that name already exists. Overwrite? - 有此名稱之偏好設定包已存在。是否覆寫？ + 已存在具有相同檔案名稱的預設偏好設定套件. 覆蓋它? @@ -2318,7 +2318,7 @@ display the splash screen Enter a file name, please: - 請輸入檔案名稱： + 請輸入檔案名稱: @@ -2331,7 +2331,7 @@ display the splash screen '%1'. This file already exists. - '%1'.該檔案已存在。 + '%1'.該檔案已存在. @@ -2341,7 +2341,7 @@ This file already exists. Creation of file '%1' failed. - 檔案「%1」建立失敗。 + 檔案「%1」建立失敗. @@ -2351,7 +2351,7 @@ This file already exists. Do you really want to delete the macro '%1'? - 您確定要刪除 '%1' 的巨集嗎？ + 您確定要刪除 '%1' 的巨集嗎? @@ -2369,15 +2369,15 @@ This file already exists. Note: your changes will be applied when you next switch workbenches - 將指導你設定巨集在一個自定全域工具列. 指令將是對話框的紅色文字. + 將指導你設定巨集在一個自定全域工具列. 指令將是對話框的紅色文字. -注意: 你的變更將會套件當你切換工作台時 +注意: 當你下次切換工作台時將會套用你的變更 Walkthrough, dialog 1 of 2 - 演練, 對話方塊2之1 + 演練, 對話框2之1 @@ -2392,7 +2392,7 @@ Note: your changes will be applied when you next switch workbenches Walkthrough, dialog 2 of 2 - 演練, 對話方塊2之2 + 演練, 對話框2之2 @@ -2413,7 +2413,7 @@ Note: your changes will be applied when you next switch workbenches Enter new name: - 輸入新名稱： + 輸入新名稱: @@ -2421,7 +2421,7 @@ Note: your changes will be applied when you next switch workbenches '%1' already exists. '%1' - 已存在 + 已存在. @@ -2432,7 +2432,7 @@ Note: your changes will be applied when you next switch workbenches Failed to rename to '%1'. Perhaps a file permission error? - 無法重新命名為'%1'。可能是檔案許可設定錯誤？ + 無法重新命名為'%1'. 可能是檔案存取權限錯誤? @@ -2448,7 +2448,7 @@ Perhaps a file permission error? Failed to duplicate to '%1'. Perhaps a file permission error? - 複製到 '%1' 失敗。 + 複製到 '%1' 失敗. 或許是檔案存取權限錯誤? @@ -2497,12 +2497,12 @@ Perhaps a file permission error? Specify first a place to save. - 首先指定存檔位置。 + 首先指定存檔位置. The macro directory doesn't exist. Please, choose another one. - 巨集目錄不存在。請另選一個。 + 巨集目錄不存在. 請另選一個. @@ -2512,12 +2512,12 @@ Perhaps a file permission error? The macro '%1' already exists. Do you want to overwrite? - 巨集 '%1' 已存在。是否要改寫？ + 巨集 '%1' 已存在. 是否要覆蓋它? You have no write permission for the directory. Please, choose another one. - 您沒有此目錄之寫入權限,請選擇另一個 + 您沒有此目錄之寫入權限,請選擇另一個. @@ -2550,7 +2550,7 @@ Perhaps a file permission error? Emissive color: - 自發光色彩: + 發光色彩: @@ -2590,19 +2590,19 @@ Perhaps a file permission error? HTML files - HTML 檔 + HTML 檔案 Access denied - 訪問被拒絕 + 存取被拒絕 Access denied to '%1' Specify another directory, please. - 訪問'%1'被拒絕 + 存取'%1'被拒絕. @@ -2704,7 +2704,7 @@ Specify another directory, please. Can't find the text: %1 - 找不到文字：%1 + 找不到文字: %1 @@ -2777,37 +2777,37 @@ Specify another directory, please. User-Saved Preference Packs - 使用者儲存之偏好設定包 + 使用者已儲存的偏好設定套件 Built-In Preference Packs - 內建偏好設定包 + 內建偏好設定套件 Toggle visibility of built-in preference pack '%1' - 切換內建偏好設定包 '%1' 之可視性 + 切換內置預設套件的可見性 '%1' Delete user-saved preference pack '%1' - 刪除使用者儲存之偏好設定包 '%1' + 刪除使用者儲存的預設套件 '%1' Toggle visibility of Addon preference pack '%1' (use Addon Manager to permanently remove) - Toggle visibility of Addon preference pack '%1' (use Addon Manager to permanently remove) + 切換附加元件預設套件'%1'的可見性(使用附加元件管理器來永久刪除) Delete saved preference pack? - 刪除已儲存之偏好設定包? + 刪除已儲存的偏好設定套件? Are you sure you want to delete the preference pack named '%1'? This cannot be undone. - 您確定要刪除偏好設定包其名稱為 '%1' 嗎？此項動作無法還原 + 您確定要刪除名為'%1'的預設套件嗎? 這將不能被復原. @@ -2832,12 +2832,12 @@ Specify another directory, please. Do you want to clear all your user settings? - 您確定要清除所有的設定嗎？ + 您確定要清除所有的設定嗎? If you agree all your settings will be cleared. - 當您同意後，所有的設定將會被清除 + 當您同意後，所有的設定將會被清除. @@ -2847,7 +2847,7 @@ Specify another directory, please. Restart required - Restart required + 需要重新啟動 @@ -2994,19 +2994,19 @@ Specify another directory, please. Project file - 專案檔 + 專案檔案 Empty source - 無指定來源 + 空來源 No source is defined. - 無指定來源 + 無指定來源. @@ -3018,7 +3018,7 @@ Specify another directory, please. No destination is defined. - 未定義目的地 + 未定義目的地. @@ -3089,7 +3089,7 @@ Specify another directory, please. Normal messages will be recorded - 正常訊息將會被錄製下來 + 將記錄正常消息 @@ -3130,8 +3130,8 @@ Specify another directory, please. When an error has occurred, the Report View dialog becomes visible on-screen while displaying the error - When an error has occurred, the Report View dialog becomes visible -on-screen while displaying the error + 出現錯誤訊息時，報告視窗對話框 +在顯示錯誤訊息的同時出現在螢幕上 @@ -3142,8 +3142,8 @@ on-screen while displaying the error When a warning has occurred, the Report View dialog becomes visible on-screen while displaying the warning - When a warning has occurred, the Report View dialog becomes visible -on-screen while displaying the warning + 出現警告訊息時，報告視窗對話框 +在顯示警告訊息的同時出現在螢幕上 @@ -3154,35 +3154,35 @@ on-screen while displaying the warning When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message - When a normal message has occurred, the Report View dialog becomes visible -on-screen while displaying the message + 出現正常訊息時，報告視窗對話框 +在顯示正常訊息的同時出現在螢幕上 Show report view on normal message - Show report view on normal message + 顯示一般正常訊息 When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message - When a log message has occurred, the Report View dialog becomes visible -on-screen while displaying the log message + 出現紀錄訊息時，報告視窗對話框 +在顯示紀錄訊息的同時出現在螢幕上 Show report view on log message - Show report view on log message + 顯示紀錄訊息 Include a timecode for each report - 在每個報告中包含時間碼 + 包括每個報告的時間碼 Include a timecode for each entry - 在每個條目中包含時間碼 + 包括每個分錄的時間碼 @@ -3197,7 +3197,7 @@ on-screen while displaying the log message Font color for normal messages in Report view panel - Font color for normal messages in Report view panel + 報告視窗面板中普通訊息的字體顏色 @@ -3207,7 +3207,7 @@ on-screen while displaying the log message Font color for log messages in Report view panel - Font color for log messages in Report view panel + 報告視窗面板中日誌訊息的字體顏色 @@ -3217,7 +3217,7 @@ on-screen while displaying the log message Font color for warning messages in Report view panel - Font color for warning messages in Report view panel + 報告視窗面板中警告訊息的字體顏色 @@ -3227,7 +3227,7 @@ on-screen while displaying the log message Font color for error messages in Report view panel - Font color for error messages in Report view panel + 報告視窗面板中錯誤訊息的字體顏色 @@ -3238,25 +3238,25 @@ on-screen while displaying the log message Internal Python output will be redirected from Python console to Report view panel - Internal Python output will be redirected -from Python console to Report view panel + 內部 Python 輸出將從 Python 控制台 +重新指向到報告視窗面板 Redirect internal Python output to report view - 內部Python重新輸出至報告視圖 + 內部Python重新指向至報告視窗 Internal Python error messages will be redirected from Python console to Report view panel - Internal Python error messages will be redirected -from Python console to Report view panel + 內部 Python 錯誤消息將從 Python 控制台 +重新指向到報告視窗面板 Redirect internal Python errors to report view - 將內部 Python 錯誤重定向到報表視景 + 將內部 Python 錯誤重新指向到報表視窗 @@ -3273,7 +3273,7 @@ from Python console to Report view panel WARNING: this process will undo any preference changes made since the specified date, and will also reset your Recent files and Macros to their state on that date. - 警告: 此過程將撤消自指定日期以來所做的任何預設更改, 並且還會將您最近使用的文件和巨集重置為該日期的狀態. + 警告: 此過程將復原自指定日期以來所做的任何預設更改, 並且還會將您最近使用的文件和巨集重置為該日期的狀態. @@ -3286,7 +3286,7 @@ from Python console to Report view panel No selection in dialog, cannot load backup file - No selection in dialog, cannot load backup file + 對話框中沒有選擇, 無法載入備份檔案 @@ -3348,8 +3348,8 @@ from Python console to Report view panel Main coordinate system will always be shown in lower right corner within opened files - Main coordinate system will always be shown in -lower right corner within opened files + 主坐標系統將始終顯示在 +開啟的文件中的右下角 @@ -3365,8 +3365,8 @@ lower right corner within opened files Size of main coordinate system representation in the corner -- in % of height/width of viewport - Size of main coordinate system representation -in the corner -- in % of height/width of viewport + 角落中主坐標系統表示的大小 +視窗高度/寬度的百分比 @@ -3383,8 +3383,8 @@ opening or creation Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - Time needed for last operation and resulting frame rate -will be shown at the lower left corner in opened files + 最後一次操作所需的時間和結果影像幀率 +將顯示在開啟文件的左下角 @@ -3644,7 +3644,7 @@ bounding box size of the 3D object that is currently displayed. Open a new viewer or restart %1 to apply anti-aliasing changes. - 開啟新視窗或重新啟動 %1 來套用反鋸齒效果 + 開啟新視窗或重新啟動 %1 來套用反鋸齒效果. @@ -3722,7 +3722,7 @@ bounding box size of the 3D object that is currently displayed. Current cache size: %1 - 目前快取大小：%1 + 目前快取大小: %1 @@ -3775,7 +3775,7 @@ bounding box size of the 3D object that is currently displayed. &Flow - &流程 + 流程(&F) @@ -3800,7 +3800,7 @@ bounding box size of the 3D object that is currently displayed. Visibility - 可見性 + 可見 @@ -3812,7 +3812,7 @@ will be displayed in gray Out g&rayed - 外部&呈灰色 + 外部呈現灰色(&R) @@ -3888,7 +3888,7 @@ besides the color bar The maximum value must be higher than the minimum value. - 最高值必須高於最低值。 + 最高值必須高於最低值. @@ -3906,7 +3906,7 @@ besides the color bar The application will create a new document when started - The application will create a new document when started + 應用程式將在啟動時建立一個新文件 @@ -3922,12 +3922,12 @@ besides the color bar Compression level for FCStd files - Compression level for FCStd files + FCStd 文件的壓縮等級 All changes in documents are stored so that they can be undone/redone - All changes in documents are stored so that they can be undone/redone + 儲存文件中的所有更改，以便可以復原/重做 @@ -3942,19 +3942,19 @@ besides the color bar How many Undo/Redo steps should be recorded - How many Undo/Redo steps should be recorded + 應記錄多少次復原/重做步驟 Allow user aborting document recomputation by pressing ESC. This feature may slightly increase recomputation time. - Allow user aborting document recomputation by pressing ESC. -This feature may slightly increase recomputation time. + 允許使用者通過按 ESC 鍵中止文件重新計算. +此功能可能會稍微增加重新計算時間. Allow aborting recomputation - Allow aborting recomputation + 允許中止重新計算 @@ -3975,8 +3975,7 @@ This feature may slightly increase recomputation time. If there is a recovery file available the application will automatically run a file recovery when it is started. - If there is a recovery file available the application will -automatically run a file recovery when it is started. + 如果有可用的恢復文件，應用程式將在啟動時自動執行文件恢復. @@ -3986,7 +3985,7 @@ automatically run a file recovery when it is started. How often a recovery file is written - How often a recovery file is written + 儲存恢復文件的頻率 @@ -3996,7 +3995,7 @@ automatically run a file recovery when it is started. A thumbnail will be stored when document is saved - A thumbnail will be stored when document is saved + 保存文件時將儲存縮略圖 @@ -4012,40 +4011,40 @@ automatically run a file recovery when it is started. Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512 - Sets the size of the thumbnail that is stored in the document. -Common sizes are 128, 256 and 512 + 設定儲存在文件中的縮略圖的大小. +常見尺寸為 128、256 和 512 The program logo will be added to the thumbnail - The program logo will be added to the thumbnail + 程式標誌將被增加到縮略圖 Add the program logo to the generated thumbnail - Add the program logo to the generated thumbnail + 將程式標誌新增到產生的縮略圖 How many backup files will be kept when saving document - How many backup files will be kept when saving document + 保存文件時會保留多少個備份文件 Maximum number of backup files to keep when resaving document - Maximum number of backup files to keep when resaving document + 重新儲存文件檔案時要保留的最大備份數目 Backup files will get extension '.FCbak' and file names get date suffix according to the specified format - Backup files will get extension '.FCbak' and file names -get date suffix according to the specified format + 備份文件將獲得副檔名'.FCbak'，檔案名稱 +根據指定格式獲得日期後綴 Use date and FCBak extension - Use date and FCBak extension + 使用日期和 FCBak 副檔名 @@ -4060,7 +4059,7 @@ get date suffix according to the specified format Allow objects to have same label - 允許物件有同樣標籤 + 允許物體具有相同的標籤 @@ -4081,7 +4080,7 @@ icon in the tree view to fully reload it. Disable partial loading of external linked objects - Disable partial loading of external linked objects + 禁用外部連結物體的部分載入 @@ -4098,14 +4097,14 @@ icon in the tree view to fully reload it. All documents that will be created will get the specified author name. Keep blank for anonymous. You can also use the form: John Doe <john@doe.com> - All documents that will be created will get the specified author name. -Keep blank for anonymous. -You can also use the form: John Doe <john@doe.com> + 將建立的所有文件都將獲得指定的作者姓名. +匿名留空. +您還可以使用以下表格: John Doe <john@doe.com> The field 'Last modified by' will be set to specified author when saving the file - The field 'Last modified by' will be set to specified author when saving the file + 保存文件時，"最後修改者"欄位將設定為指定的作者 @@ -4120,7 +4119,7 @@ You can also use the form: John Doe <john@doe.com> Default company name to use for new files - Default company name to use for new files + 新文件的預設公司名稱 @@ -4205,7 +4204,7 @@ You can also use the form: John Doe <john@doe.com> URL describing more about the license - URL describing more about the license + 描述有關授權許可更多訊息的 URL @@ -4213,7 +4212,7 @@ You can also use the form: John Doe <john@doe.com> The format of the date to use. - The format of the date to use. + 使用的日期格式. @@ -4223,7 +4222,7 @@ You can also use the form: John Doe <john@doe.com> Format - Format + 格式 @@ -4251,7 +4250,7 @@ You can also use the form: John Doe <john@doe.com> Comment - 評論 + 註釋 @@ -4271,7 +4270,7 @@ You can also use the form: John Doe <john@doe.com> Character - 字符 + 字元 @@ -4468,22 +4467,22 @@ You can also use the form: John Doe <john@doe.com> Offscreen (New) - Offscreen (New) + 螢幕外 (新) Offscreen (Old) - Offscreen (Old) + 螢幕外 (舊) Framebuffer (custom) - Framebuffer (custom) + 影像緩衝(自訂) Framebuffer (as is) - Framebuffer (as is) + 影像緩衝(原樣) @@ -4501,7 +4500,7 @@ You can also use the form: John Doe <john@doe.com> Variables defined by macros are created as local variables - Variables defined by macros are created as local variables + 巨集定義的變量建立為局部變量 @@ -4521,7 +4520,7 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros - The directory in which the application will search for macros + 應用程式將在此目錄中搜索巨集 @@ -4531,7 +4530,7 @@ You can also use the form: John Doe <john@doe.com> Recorded macros will also contain user interface commands - Recorded macros will also contain user interface commands + 錄製的巨集還將包含使用者界面指令 @@ -4541,7 +4540,7 @@ You can also use the form: John Doe <john@doe.com> Recorded macros will also contain user interface commands as comments - Recorded macros will also contain user interface commands as comments + 錄製的巨集還將包含使用者界面指令作為註釋 @@ -4556,7 +4555,7 @@ You can also use the form: John Doe <john@doe.com> Commands executed by macro scripts are shown in Python console - Commands executed by macro scripts are shown in Python console + 巨集腳本執行的指令會顯示在 Python 控制台中 @@ -4586,27 +4585,27 @@ You can also use the form: John Doe <john@doe.com> How many macros should be listed in recent macros list - How many macros should be listed in recent macros list + 最近使用的巨集列表中應該列出多少個巨集 Keyboard shortcut count - Keyboard shortcut count + 鍵盤快捷鍵計數 How many recent macros should have shortcuts - 最近有多少巨集應該有快捷鍵 + 有多少最近使用的巨集應該有快捷鍵 Keyboard Modifiers - Keyboard Modifiers + 鍵盤修改 Keyboard modifiers, default = Ctrl+Shift+ - Keyboard modifiers, default = Ctrl+Shift+ + 鍵盤修改，預設 = Ctrl+Shift+ @@ -4630,12 +4629,12 @@ You can also use the form: John Doe <john@doe.com> Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) - Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) + 使用箭頭時的轉動值(預設值 = 8：步距角 = 360/8 = 45 度) Corner - 坐標系統導覽立方體位置 + 坐標系統位置 @@ -4665,7 +4664,7 @@ You can also use the form: John Doe <john@doe.com> Rotates to nearest possible state when clicking a cube face - Rotates to nearest possible state when clicking a cube face + 點擊立方體面時旋轉到最近的可能狀態 @@ -4685,7 +4684,7 @@ You can also use the form: John Doe <john@doe.com> Cube size - 立方體大小 + 導覽立方體大小 @@ -4722,8 +4721,8 @@ around the cube List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - List the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + 列出每個所選導航設定的滑鼠遊標按鈕設定. +選擇一組然後按下按鈕檢視所述設定. @@ -4747,7 +4746,7 @@ Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. 旋轉軌跡樣式. -軌跡球: 水平移動滑鼠會使零件圍繞y軸旋轉 +軌跡球: 水平移動滑鼠會使零件圍繞y軸旋轉. 轉盤: 零件將圍繞 z 軸(具有約束軸)旋轉. 自由轉盤: 零件將圍繞 z 軸旋轉. @@ -4774,7 +4773,7 @@ Free Turntable: the part will be rotated around the z-axis. Rotations in 3D will use current cursor position as center for rotation - Rotations in 3D will use current cursor position as center for rotation + 3D 旋轉將使用目前游標位置作為旋轉中心 @@ -4794,12 +4793,12 @@ Free Turntable: the part will be rotated around the z-axis. Default camera orientation - 預設相機視角 + 預設相機視野方向 Default camera orientation when creating a new document or selecting the home view - Default camera orientation when creating a new document or selecting the home view + 建立新文件或選擇主視景時的預設相機視野方向 @@ -4810,8 +4809,8 @@ Free Turntable: the part will be rotated around the z-axis. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - Sets camera zoom for new documents. -The value is the diameter of the sphere to fit on the screen. + 為新文件設定相機縮放. +該值是適合螢幕的球體的直徑. @@ -4831,7 +4830,7 @@ The value is the diameter of the sphere to fit on the screen. Zoom operations will be performed at position of mouse pointer - Zoom operations will be performed at position of mouse pointer + 縮放操作將在游標處的位置進行 @@ -4847,13 +4846,13 @@ The value is the diameter of the sphere to fit on the screen. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. + 將縮放多少. +縮放步長'1'表示每個縮放步長為 7.5 倍. Direction of zoom operations will be inverted - Direction of zoom operations will be inverted + 縮放操作的方向將反轉 @@ -4865,14 +4864,14 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - Prevents view tilting when pinch-zooming. -Affects only gesture navigation style. -Mouse tilting is not disabled by this setting. + 防止縮放時視景傾斜. +僅影響手勢導航樣式. +此設定未禁用滑鼠游標傾斜. Disable touchscreen tilt gesture - Disable touchscreen tilt gesture + 禁用觸控螢幕傾斜手勢 @@ -4897,7 +4896,7 @@ Mouse tilting is not disabled by this setting. Front - 前視圖 + 正視圖 @@ -4941,8 +4940,7 @@ Mouse tilting is not disabled by this setting. Words will be wrapped when they exceed available horizontal space in Python console - Words will be wrapped when they exceed available -horizontal space in Python console + 當字詞超出 Python 控制台中的可用水平空間時，字詞將會換行 @@ -4952,7 +4950,7 @@ horizontal space in Python console The cursor shape will be a block - The cursor shape will be a block + 文字游標外型將會是區塊 @@ -4962,7 +4960,7 @@ horizontal space in Python console Saves Python history across sessions - Saves Python history across sessions + 橫跨作業階段儲存 Python 歷史記錄 @@ -4987,8 +4985,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. + 在 3D 視景中擷取元素的區域. +較大的值便於選擇物體，但會使小特徵不易選擇. @@ -5014,7 +5012,7 @@ Larger value eases to pick things, but can make small features impossible to sel Add checkboxes for selection in document tree - Add checkboxes for selection in document tree + 在文件樹中增加複選框以供選擇 @@ -5032,7 +5030,7 @@ Larger value eases to pick things, but can make small features impossible to sel Enable preselection and highlight by specified color - Enable preselection and highlight by specified color + 啟用預選並按指定顏色高亮顯示 @@ -5042,7 +5040,7 @@ Larger value eases to pick things, but can make small features impossible to sel Enable selection highlighting and use specified color - Enable selection highlighting and use specified color + 啟用選擇高亮顯示並使用指定的顏色 @@ -5052,7 +5050,7 @@ Larger value eases to pick things, but can make small features impossible to sel Background color for the model view - Background color for the model view + 模型視景的背景顏色 @@ -5063,7 +5061,7 @@ Larger value eases to pick things, but can make small features impossible to sel Background will have selected color - Background will have selected color + 背景將具有選定的顏色 @@ -5074,55 +5072,55 @@ Larger value eases to pick things, but can make small features impossible to sel Background will have selected color gradient - Background will have selected color gradient + 背景將具有選定的漸層顏色 Linear gradient - Linear gradient + 線性漸層 Radial gradient - Radial gradient + 輻射漸層 Top: - Top: + 上: Middle: - Middle: + 中: Switches the colors of the gradient - Switches the colors of the gradient + 切換漸變的顏色 Switch - 切換 + 轉變切換 Color gradient will get selected color as middle color - Color gradient will get selected color as middle color + 漸層顏色會將選定的顏色作為中間色 Middle color - 中間色 + 中間顏色 Bottom: - Bottom: + 下: @@ -5132,7 +5130,7 @@ Larger value eases to pick things, but can make small features impossible to sel Object being edited - Object being edited + 正在編輯的物體 @@ -5182,7 +5180,7 @@ Larger value eases to pick things, but can make small features impossible to sel Input the source value and unit - Input the source value and unit + 輸入來源數值和單位 @@ -5192,7 +5190,7 @@ Larger value eases to pick things, but can make small features impossible to sel Input here the unit for the result - Input here the unit for the result + 在此輸入結果的單位 @@ -5208,8 +5206,8 @@ Larger value eases to pick things, but can make small features impossible to sel List of last used calculations. To add a calculation press Return in the value input field - List of last used calculations. -To add a calculation press Return in the value input field + 最後使用的計算列表. +要增加計算，請在值輸入欄位中按下 Return 鍵 @@ -5230,8 +5228,8 @@ To add a calculation press Return in the value input field Unit system to be used for the Quantity The preference system is the one set in the general preferences. - Unit system to be used for the Quantity -The preference system is the one set in the general preferences. + 用於數量的單位系統 +偏好系統是通用偏好其中設定的一個. @@ -5241,7 +5239,7 @@ The preference system is the one set in the general preferences. Decimals for the Quantity - Decimals for the Quantity + 數量的小數位數 @@ -5251,7 +5249,7 @@ The preference system is the one set in the general preferences. Unit category for the Quantity - Unit category for the Quantity + 數量的單位類別 @@ -5274,12 +5272,12 @@ The preference system is the one set in the general preferences. unknown unit: - unknown unit: + 未知單位: unit mismatch - unit mismatch + 單位不符合 @@ -5372,27 +5370,27 @@ The 'Status' column shows whether the document could be recovered. Are you sure you want to delete the selected transient directories? - 您確定要刪除已選之暫存資料夾？ + 您確定要刪除已選之暫存資料夾? When deleting the selected transient directory you won't be able to recover any files afterwards. - 當刪除已選之暫存資料夾後您將無法進行任何檔案之復原。 + 當刪除已選之暫存資料夾後您將無法進行任何檔案之復原. Are you sure you want to delete all transient directories? - 您確定要移除所有暫存資料夾嗎？ + 您確定要移除所有暫存資料夾嗎? When deleting all transient directories you won't be able to recover any files afterwards. - When deleting all transient directories you won't be able to recover any files afterwards. + 刪除所有臨時目錄後，您將無法恢復任何文件. Transient directories deleted. - 暫存資料夾已刪除 + 暫存資料夾已刪除. @@ -5415,7 +5413,7 @@ The 'Status' column shows whether the document could be recovered. Error opening saved file: %1 - 開啟已儲存的檔案錯誤：%1 + 開啟已儲存的檔案錯誤: %1 @@ -5435,7 +5433,7 @@ The 'Status' column shows whether the document could be recovered. minutes - 分鐘 + 分 @@ -5445,7 +5443,7 @@ The 'Status' column shows whether the document could be recovered. %1 of %2 (%3/sec) %4 - %2 (%3/sec) %4的%1 + %2 (%3/秒) %4的%1 @@ -5534,7 +5532,7 @@ The 'Status' column shows whether the document could be recovered. Removing a folder only takes effect after an application restart. - 僅於應用程式重新啟動後才移除資料夾 + 僅於應用程式重新啟動後才移除資料夾. @@ -5624,7 +5622,7 @@ The 'Status' column shows whether the document could be recovered. Rename group - 重命名群組 + 重新命名群組 @@ -5641,12 +5639,12 @@ The 'Status' column shows whether the document could be recovered. Collapse - 瓦解 + 收合 Do you really want to remove this parameter group? - Do you really want to remove this parameter group? + 您真的要刪除此參數組嗎? @@ -5656,7 +5654,7 @@ The 'Status' column shows whether the document could be recovered. The sub-group '%1' already exists. - 子群組'%1'已經存在。 + 子群組'%1'已經存在. @@ -5676,7 +5674,7 @@ The 'Status' column shows whether the document could be recovered. Reading from '%1' failed. - 讀取'%1'失敗。 + 讀取'%1'失敗. @@ -5694,7 +5692,7 @@ The 'Status' column shows whether the document could be recovered. Rename key - 重命名鍵 + 重新命名鍵 @@ -5742,7 +5740,7 @@ The 'Status' column shows whether the document could be recovered. The item '%1' already exists. - 該項目'%1'已存在。 + 該項目'%1'已存在. @@ -5783,7 +5781,7 @@ The 'Status' column shows whether the document could be recovered. Shift click for opposite direction - Shift click for opposite direction + 同時按下Shift鍵點擊使用相反方向 @@ -5818,7 +5816,7 @@ The 'Status' column shows whether the document could be recovered. Euler angles (zy'x'') - Euler angles (zy'x'') + 歐拉角度 (zy'x'') @@ -5863,7 +5861,7 @@ The 'Status' column shows whether the document could be recovered. Apply incremental changes - Apply incremental changes + 套用增量更改 @@ -5888,7 +5886,7 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. + 請在點擊此按鈕之前選擇 1、2 或 3 個點. 點可能位於頂點、面或邊上. 如果在面或邊上，則使用的點將是沿面或邊的滑鼠游標位置處的點. 如果選擇 1 個點，它將用作旋轉中心. 如果選擇了 2 個點，它們之間的中點將成為旋轉中心，如果需要，將建立一個新的自定義軸. 如果選擇了 3 個點，則第一個點成為旋轉中心並位於垂直於由 3 個點定義的平面的矢量上. 報告視圖中提供了一些距離和角度信息，這在對齊對象時很有用. 為了您的方便，當使用 Shift + 點擊時，適當的距離或角度被複製到剪貼板. @@ -5898,7 +5896,7 @@ The 'Status' column shows whether the document could be recovered. There are input fields with incorrect input, please ensure valid placement values! - 於輸入區域有錯誤的內容,請確認該區域合理之輸入內容 + 於輸入區域有錯誤的內容,請確認該區域合理之輸入內容! @@ -5975,7 +5973,7 @@ The 'Status' column shows whether the document could be recovered. Inventor Tree - 發明人目錄 + 發明歷程 @@ -6023,7 +6021,7 @@ The 'Status' column shows whether the document could be recovered. The specified file is not a valid image file. - 指定的檔案不是有效的影像檔。 + 指定的檔案不是有效的影像檔. @@ -6033,7 +6031,7 @@ The 'Status' column shows whether the document could be recovered. No active 3d view found. - 找不到作業中的 3d 視圖。 + 找不到作業中的 3d 視圖. @@ -6061,12 +6059,12 @@ The 'Status' column shows whether the document could be recovered. The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. - The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. + 所選物體包含其他依賴物體中. 請選擇要匯出的物體. 預設情況下會自動選擇所有依賴物體. Auto select depending objects - Auto select depending objects + 自動選擇依賴物體 @@ -6076,7 +6074,7 @@ The 'Status' column shows whether the document could be recovered. Depending on - Depending on + 依賴於 @@ -6093,7 +6091,7 @@ The 'Status' column shows whether the document could be recovered. Depended by - Depended by + 依賴於 @@ -6108,14 +6106,13 @@ The 'Status' column shows whether the document could be recovered. &Use Original Selections - &Use Original Selections + 使用原始選擇(&U) Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + 忽略依賴關係並繼續處理在開啟此對話框之前最初選擇的物體 @@ -6179,13 +6176,13 @@ originally selected prior to opening this dialog Normal messages - 正常訊息： + 正常訊息 Log messages - 日誌訊息 + 日誌記錄訊息 @@ -6208,7 +6205,7 @@ originally selected prior to opening this dialog Show Report view on - Show Report view on + 顯示報表檢視於 @@ -6218,7 +6215,7 @@ originally selected prior to opening this dialog Redirect Python errors - 重定向Python的錯誤 + 重新指向Python的錯誤 @@ -6266,7 +6263,7 @@ originally selected prior to opening this dialog Selection View - Selection View + 選擇視景 @@ -6276,7 +6273,7 @@ originally selected prior to opening this dialog Searches object labels - 搜尋物件標籤 + 搜尋物體標籤 @@ -6286,12 +6283,12 @@ originally selected prior to opening this dialog The number of selected items - The number of selected items + 所選項目的數量 Picked object list - Picked object list + 擷取物體列表 @@ -6301,7 +6298,7 @@ originally selected prior to opening this dialog Selects only this object - 僅選擇此物件 + 僅選擇此物體 @@ -6311,7 +6308,7 @@ originally selected prior to opening this dialog Deselects this object - 取消選擇此物件 + 取消選擇此物體 @@ -6321,7 +6318,7 @@ originally selected prior to opening this dialog Selects and fits this object in the 3D window - 於3D視窗選取並聚焦於此物件 + 於3D視窗選取並聚焦於此物體 @@ -6331,17 +6328,17 @@ originally selected prior to opening this dialog Selects and locates this object in the tree view - 於樹狀圖中選取並定位此物件 + 於樹狀圖中選取並定位此物體 Mark to recompute - 執行重新運算 + 標記為重新計算 Mark this object to be recomputed - 對此物件執行重新運算 + 對此物體標記為重新計算 @@ -6351,17 +6348,17 @@ originally selected prior to opening this dialog Reveals this object and its subelements in the python console. - 將此物件及其子元素於python主控台中顯示 + 將此物體及其子元素於python主控台中顯示. Duplicate subshape - Duplicate subshape + 複製子形狀 Creates a standalone copy of this subshape in the document - Creates a standalone copy of this subshape in the document + 在文件中建立此子形狀的獨立複製體 @@ -6369,7 +6366,7 @@ originally selected prior to opening this dialog Application - 應用程式 + 文件內容 @@ -6391,7 +6388,7 @@ originally selected prior to opening this dialog This has been modified outside of the source editor. Do you want to reload it? %1. -這已在源碼編輯器之外被修改過。您想重新載入它嗎？ +這已在源碼編輯器之外被修改過. 您想重新載入它嗎? @@ -6402,12 +6399,12 @@ This has been modified outside of the source editor. Do you want to reload it? The document has been modified. Do you want to save your changes? - 該文件已被修改。您想儲存您的變更嗎？ + 該文件已被修改. 您想儲存您的變更嗎? FreeCAD macro - FreeCAD巨集 + FreeCAD 巨集 @@ -6427,7 +6424,7 @@ Do you want to save your changes? - Editor - -編輯器 + - 編輯器 @@ -6437,12 +6434,12 @@ Do you want to save your changes? %1 chars added - 添加 %1 字元 + 增加 %1 字元 Formatted - 格式化了的 + 已格式化 @@ -6450,7 +6447,7 @@ Do you want to save your changes? Exact match - Exact match + 完全符合 @@ -6458,7 +6455,7 @@ Do you want to save your changes? Exact match - Exact match + 完全符合 @@ -6535,22 +6532,22 @@ Do you want to save your changes? Tap OR click left mouse button. - Tap OR click left mouse button. + 點擊或按下滑鼠標右鍵. Drag screen with two fingers OR press right mouse button. - Drag screen with two fingers OR press right mouse button. + 用兩根手指拖動螢幕或按下滑鼠右鍵. Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. - Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition. + 用一根手指拖動螢幕或按下滑鼠左鍵. 在 草圖 && 其他編輯模式下，另外按住 Alt. Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard. + 捏合(將兩根手指放在螢幕上 && 將它們從 || 向彼此拉開)或滾動滑鼠中鍵或在鍵盤上按下 PgUp/PgDown. @@ -6558,37 +6555,37 @@ Do you want to save your changes? Graphviz not found - 未發現Graphviz + 未發現可視圖形 Graphviz couldn't be found on your system. - Graphviz couldn't be found on your system. + 在您的系統上找不到可視圖形. Read more about it here. - Read more about it here. + 在這裡閱讀更多相關訊息. Do you want to specify its installation path if it's already installed? - Do you want to specify its installation path if it's already installed? + 如果已安裝，是否要指定其安裝路徑? Graphviz installation path - Graphviz安裝路徑 + 可視圖形安裝路徑 Graphviz failed - Graphviz錯誤 + 可視圖形錯誤 Graphviz failed to create an image file - Graphviz建立影像失敗 + 可視圖形建立影像失敗 @@ -6656,12 +6653,12 @@ Do you want to save your changes? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 Scroll middle mouse button - 滾動滑鼠中鍵 + 滑鼠滾動中鍵 @@ -6796,17 +6793,17 @@ Do you want to save your changes? Help addon needed! - Help addon needed! + 需要求助說明附加元件! The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager - The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager + %1 的求助說明系統現在由'求助說明'附加元件處理. 它可以通過「附加元件管理員」 輕鬆安裝 Open Addon Manager - Open Addon Manager + 開啟附加元件管理員 @@ -6836,14 +6833,14 @@ Do you want to save your changes? The exported object contains external link. Please save the documentat least once before exporting. - The exported object contains external link. Please save the documentat least once before exporting. + 匯出的物體包含外部連結. 請在匯出前至少儲存一次文件. To link to external objects, the document must be saved at least once. Do you want to save the document now? - To link to external objects, the document must be saved at least once. -Do you want to save the document now? + 要連結到外部物體，文件必須至少儲存一次. +您現在要儲存文件嗎? @@ -6860,7 +6857,7 @@ Do you want to save the document now? The alignment is already in progress. - 正在對齊中 + 正在對齊中. @@ -6896,20 +6893,20 @@ Do you want to save the document now? Too few points picked in the left view. At least %1 points are needed. - 左側視圖選擇點過少,至少要%1點 + 左側視圖選擇點過少,至少要%1點. Too few points picked in the right view. At least %1 points are needed. - 右側視圖選擇點過少,至少要%1點 + 右側視圖選擇點過少,至少要%1點. Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - 左右視圖所選點數不同,左側視圖選擇%1點,右側視圖選擇%2點 + 左右視圖所選點數不同,左側視圖選擇%1點,右側視圖選擇%2點. @@ -6925,7 +6922,7 @@ How do you want to proceed? Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - 左右視圖所選點數不同 + 左右視圖所選點不同,左側視圖選擇%1點,右側視圖選擇%2點. @@ -6948,22 +6945,22 @@ How do you want to proceed? Tap OR click left mouse button. - Tap OR click left mouse button. + 點擊或按下滑鼠標右鍵. Drag screen with two fingers OR press ALT + middle mouse button. - Drag screen with two fingers OR press ALT + middle mouse button. + 用兩根手指拖動螢幕或按 ALT + 滑鼠中鍵. Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition. + 用一根手指拖動螢幕或按 ALT + 滑鼠左鍵. 在 草圖 和其他編輯模式下，另外按住 Alt. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard. + 捏合(將兩根手指放在螢幕上並將它們相互拉開或拉近)或滾動滑鼠中鍵或按 ALT + 滑鼠右鍵或鍵盤上的 PgUp/PgDown. @@ -6971,7 +6968,7 @@ How do you want to proceed? Press modifier keys - Press modifier keys + 按修改鍵 @@ -6987,7 +6984,7 @@ How do you want to proceed? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -7010,22 +7007,22 @@ How do you want to proceed? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 Press right mouse button and move mouse - Press right mouse button and move mouse + 按下滑鼠右鍵並移動滑鼠 Press left mouse button and move mouse - Press left mouse button and move mouse + 按下滑鼠左鍵並移動滑鼠 Press middle mouse button or SHIFT and right mouse button - Press middle mouse button or SHIFT and right mouse button + 按下滑鼠中鍵或按下SHIFT鍵以及滑鼠右鍵 @@ -7051,7 +7048,7 @@ How do you want to proceed? Remaining: %1 - 剩餘： %1 + 剩餘: %1 @@ -7061,7 +7058,7 @@ How do you want to proceed? Do you really want to abort the operation? - 您確實要中止操作嗎？ + 您確實要中止操作嗎? @@ -7069,7 +7066,7 @@ How do you want to proceed? Remaining: %1 - 剩餘： %1 + 剩餘: %1 @@ -7079,7 +7076,7 @@ How do you want to proceed? Do you really want to abort the operation? - 您確實要中止操作嗎？ + 您確實要中止操作嗎? @@ -7087,7 +7084,7 @@ How do you want to proceed? Change the linked object - Change the linked object + 更改連結物體 @@ -7100,7 +7097,7 @@ How do you want to proceed? Object not found - 未發現物件 + 未發現物體 @@ -7113,22 +7110,22 @@ How do you want to proceed? property - property + 屬性 Auto expand - Auto expand + 自動展開 Show all - Show all + 顯示全部 Expression... - Expression... + 表達式動作... @@ -7139,17 +7136,17 @@ How do you want to proceed? Rename property group - Rename property group + 重新命名屬性群組 Remove property - Remove property + 刪除屬性 Group name: - Group name: + 群組名稱: @@ -7205,22 +7202,22 @@ Do you want to exit without saving your data? Unhandled PyCXX exception. - 未處理 PyCXX例外。 + 未處理 PyCXX例外. Unhandled FreeCAD exception. - 未處理FreeCAD例外。 + 未處理FreeCAD例外. Unhandled std C++ exception. - 未處理的標準 c + + 異常。 + 未處理的標準 C++ 異常. Unhandled unknown C++ exception. - 未處理未知的C++例外。 + 未處理未知的 C++ 異常. @@ -7250,12 +7247,12 @@ Do you want to exit without saving your data? Saves Python history across %1 sessions - Saves Python history across %1 sessions + 橫跨 %1 個作業階段保存 Python 歷史記錄 &Paste - &貼上 + 貼上(&P) @@ -7265,7 +7262,7 @@ Do you want to exit without saving your data? Clear console - 清除工作台 + 清除控制台 @@ -7303,7 +7300,7 @@ Do you want to exit without saving your data? Comment - 評論 + 註釋 @@ -7326,7 +7323,7 @@ Do you want to exit without saving your data? The file '%1' cannot be opened. - 無法打開'%1'檔案。 + 無法打開檔案'%1'. @@ -7339,7 +7336,7 @@ Do you want to exit without saving your data? Run macro %1 (Shift+click to edit) keyboard shortcut: %2 - 執行巨集 %1 (Shift+click 來編輯) 快捷鍵： %2 + 執行巨集 %1 (Shift+點擊以編輯)鍵盤快捷鍵: %2 @@ -7349,7 +7346,7 @@ Do you want to exit without saving your data? The file '%1' cannot be opened. - 無法打開'%1'檔案。 + 無法打開檔案'%1'. @@ -7357,7 +7354,7 @@ Do you want to exit without saving your data? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -7372,7 +7369,7 @@ Do you want to exit without saving your data? Scroll middle mouse button - 滾動滑鼠中鍵 + 滑鼠滾動中鍵 @@ -7385,17 +7382,17 @@ Do you want to exit without saving your data? Next - Next + 下一個 Case sensitive - Case sensitive + 區分大小寫 Whole words - Whole words + 整句文字 @@ -7453,7 +7450,7 @@ Do you want to exit without saving your data? The directory '%1' does not exist. Do you want to specify an existing directory? - 目錄 '%1' 不存在。您想指定現有的目錄嗎？ + 目錄 '%1' 不存在. 您想指定現有的目錄嗎? @@ -7465,7 +7462,7 @@ Do you want to specify an existing directory? You don't have write permission to '%1' Do you want to specify another directory? - 您沒有寫入 '%1' 的權限，您要指定其他目錄嗎？ + 您沒有寫入 '%1' 的權限，您要指定其他目錄嗎? @@ -7513,12 +7510,12 @@ Do you want to specify another directory? Translation Increment: - Translation Increment: + 轉移增量: Rotation Increment: - Rotation Increment: + 旋轉增量: @@ -7629,7 +7626,7 @@ Do you want to specify another directory? edit selection - 編輯所選物件 + 編輯所選物體 @@ -7642,12 +7639,12 @@ Do you want to specify another directory? The text of the underlying object has changed. Discard changes and reload the text from the object? - The text of the underlying object has changed. Discard changes and reload the text from the object? + 基礎物體的文字已更改. 放棄更改並重新載入物體中的文字? Yes, reload. - 是，重新載入 + 是，重新載入. @@ -7657,12 +7654,12 @@ Do you want to specify another directory? Do you want to save your changes before closing? - 是否在關閉前儲存變更？ + 是否在關閉前儲存變更? If you don't save, your changes will be lost. - 若不儲存將會失去所有修改 + 若不儲存將會失去所有修改. @@ -7676,7 +7673,7 @@ Do you want to specify another directory? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -7686,12 +7683,12 @@ Do you want to specify another directory? Press right mouse button - Press right mouse button + 按下滑鼠右鍵 Scroll middle mouse button - 滾動滑鼠中鍵 + 滑鼠滾動中鍵 @@ -7699,7 +7696,7 @@ Do you want to specify another directory? Press left mouse button - 按滑鼠左鍵 + 按下滑鼠左鍵 @@ -7727,32 +7724,32 @@ Do you want to specify another directory? Arabic - Arabic + 阿拉伯 Basque - Basque + 巴斯克 Belarusian - Belarusian + 白俄羅斯語 Bulgarian - Bulgarian + 保加利亞語 Catalan - Catalan + 加泰羅尼亞語 Chinese Simplified - 簡體中文 + 简体中文 @@ -7782,7 +7779,7 @@ Do you want to specify another directory? Filipino - Filipino + 菲律賓 @@ -7797,7 +7794,7 @@ Do you want to specify another directory? Galician - Galician + 加利西亞語 @@ -7817,7 +7814,7 @@ Do you want to specify another directory? Indonesian - Indonesian + 印度尼西亞 @@ -7832,17 +7829,17 @@ Do you want to specify another directory? Kabyle - Kabyle + 卡比勒 Korean - Korean + 韓語 Lithuanian - Lithuanian + 立陶宛語 @@ -7857,7 +7854,7 @@ Do you want to specify another directory? Portuguese, Brazilian - Portuguese, Brazilian + 葡萄牙文, 巴西 @@ -7882,7 +7879,7 @@ Do you want to specify another directory? Serbian, Latin - Serbian, Latin + 塞爾維亞, 拉丁語系 @@ -7902,7 +7899,7 @@ Do you want to specify another directory? Spanish, Argentina - Spanish, Argentina + 西班牙文, 阿根廷 @@ -7922,17 +7919,17 @@ Do you want to specify another directory? Valencian - Valencian + 巴倫西亞 Vietnamese - Vietnamese + 越南語 Georgian - Georgian + 格魯吉亞語 @@ -7956,12 +7953,12 @@ Do you want to specify another directory? Search... - Search... + 搜尋... Search for objects - Search for objects + 搜尋物體 @@ -7991,7 +7988,7 @@ Do you want to specify another directory? Application - 應用程式 + 文件內容 @@ -8032,7 +8029,7 @@ Do you want to specify another directory? Rename object - 重新命名物件 + 重新命名物體 @@ -8042,87 +8039,87 @@ Do you want to specify another directory? Finish editing object - 完成編輯物件 + 完成編輯物體 Add dependent objects to selection - Add dependent objects to selection + 將依賴物體增加到選擇 Adds all dependent objects to the selection - Adds all dependent objects to the selection + 將所有依賴物體增加到選擇 Close document - Close document + 關閉文件 Close the document - Close the document + 關閉此文件 Reload document - Reload document + 重新載入文件 Reload a partially loaded document - Reload a partially loaded document + 重新載入部分載入的文件 Skip recomputes - 略過重新運算 + 略過重新計算 Enable or disable recomputations of document - 啟用或停用檔案重新運算之功能 + 啟用或停用檔案重新計算之功能 Allow partial recomputes - Allow partial recomputes + 允許部分重新計算 Enable or disable recomputating editing object when 'skip recomputation' is enabled - Enable or disable recomputating editing object when 'skip recomputation' is enabled + 啟用'跳過重新計算'時啟用或禁用重新計算編輯物體 Mark to recompute - 執行重新運算 + 標記為重新計算 Mark this object to be recomputed - 對此物件執行重新運算 + 對此物體標記為重新計算 Recompute object - Recompute object + 重新計算物體 Recompute the selected object - Recompute the selected object + 重新計算所選的物體 (but must be executed) - (but must be executed) + (但必須執行) %1, Internal name: %2 - %1, Internal name: %2 + %1, 內部名稱: %2 @@ -8135,7 +8132,7 @@ Do you want to specify another directory? Table - Table + 表格 @@ -8205,7 +8202,7 @@ Do you want to specify another directory? About %1 - 關於%1 + 關於 %1 @@ -8359,7 +8356,7 @@ Do you want to specify another directory? DAG View - DAG視圖 + DAG 視景 @@ -8419,22 +8416,22 @@ Do you want to specify another directory? Cannot open unknown filetype: %1 - 無法開啟未知文件類型：%1 + 無法開啟未知文件類型: %1 Export failed - Export failed + 匯出失敗 Cannot save to unknown filetype: %1 - 無法儲存為未知的檔案類型：%1 + 無法儲存為未知的檔案類型: %1 Workbench failure - 工作台故障 + 工作台異常 @@ -8465,7 +8462,7 @@ Do you want to specify another directory? There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. + 載入檔案時出現嚴重錯誤. 某些資料可能已被修改或根本未恢復. 儲存專案很可能會導致資料丟失. @@ -8496,33 +8493,33 @@ Do you want to specify another directory? The exported object contains external link. Please save the documentat least once before exporting. - The exported object contains external link. Please save the documentat least once before exporting. + 匯出的物體包含外部連結. 請在匯出前至少儲存一次文件. Delete failed - Delete failed + 刪除失敗 Dependency error - Dependency error + 依賴錯誤 Copy selected - Copy selected + 複製已選取的 Copy active document - Copy active document + 複製啟用文件 Copy all documents - Copy all documents + 複製所有文件 @@ -8532,7 +8529,7 @@ Do you want to specify another directory? Expression error - Expression error + 表達式錯誤 @@ -8544,18 +8541,18 @@ Please check the Report View for more details. Failed to paste expressions - Failed to paste expressions + 無法貼上表達式 Cannot load workbench - 無法載入工作平台 + 無法載入工作台 A general error occurred while loading the workbench - 載入工作平台出現一般錯誤 + 載入工作台出現一般錯誤 @@ -8567,13 +8564,13 @@ Please check the Report View for more details. Only one object selected. Please select two objects. Be aware the point where you click matters. - 僅選擇一個物件,請選擇兩個物件,請注意您所點物件之何點 + 僅選擇一個物體,請選擇兩個物體,請注意您所點物體之何點. Please select two objects. Be aware the point where you click matters. - 請選擇兩個物件,請注意您所點物件之何點 + 請選擇兩個物體,請注意您所點物體之何點. @@ -8627,7 +8624,7 @@ Be aware the point where you click matters. Importing the restored views would clear the already stored views. Do you want to continue? - 導入恢復的視圖將清除已存儲的視圖。您要繼續嗎？ + 導入恢復的視圖將清除已存儲的視圖. 您要繼續嗎? @@ -8637,7 +8634,7 @@ Do you want to continue? Cannot open file '%1'. - 無法開啟檔案'%1' + 無法開啟檔案'%1'. @@ -8667,19 +8664,19 @@ Do you want to continue? Enter the name: - 輸入名稱： + 輸入名稱: New text item - 新增文字項 + 新增文字項目 Enter your text: - 輸入您的文字： + 輸入您的文字: @@ -8695,7 +8692,7 @@ Do you want to continue? Enter your number: - 輸入您的號碼： + 輸入您的號碼: @@ -8718,7 +8715,7 @@ Do you want to continue? Choose an item: - 選擇一個項目： + 選擇一個項目: @@ -8728,12 +8725,12 @@ Do you want to continue? Rename group - 重命名群組 + 重新命名群組 The group '%1' cannot be renamed. - '%1'群組法重新命名 + '%1'群組無法重新命名. @@ -8743,7 +8740,7 @@ Do you want to continue? The group '%1' already exists. - 該群組'%1'已存在。 + 該群組'%1'已存在. @@ -8814,13 +8811,13 @@ Do you want to continue? Physical path: - Physical path: + 實體路徑: Document: - Document: + 文件: @@ -8831,12 +8828,12 @@ Do you want to continue? Identical physical path - Identical physical path + 相同的物理路徑 Could not save document - Could not save document + 無法儲存檔案 @@ -8861,7 +8858,7 @@ Would you like to save the file with a different name? Save dependent files - Save dependent files + 儲存依賴檔案 @@ -8877,7 +8874,7 @@ Would you like to save the file with a different name? Save document under new filename... - 以新檔名儲存文件 + 以新檔名儲存文件... @@ -8894,7 +8891,7 @@ Would you like to save the file with a different name? Failed to save document - 儲存檔案失敗。 + 儲存檔案失敗 @@ -8904,12 +8901,12 @@ Would you like to save the file with a different name? Save a copy of the document under new filename... - 以新的檔案名稱儲存目前檔案的副本 + 以新的檔案名稱儲存目前檔案的備份... %1 document (*.FCStd) - ％1文件（*.FCStd） + %1 文件（*.FCStd） @@ -8919,7 +8916,7 @@ Would you like to save the file with a different name? The document is not closable for the moment. - 目前文件無法關閉 + 目前文件無法關閉. @@ -9005,7 +9002,7 @@ Choose 'Abort' to abort Unable to open your browser. Please open a browser window and type in: http://localhost:%1. - 無法打開您的流覽器。請打開流覽器視窗，並在鍵入： http://localhost:%1。 + 無法打開您的流覽器. 請打開流覽器視窗，並輸入: http://localhost:%1. @@ -9015,12 +9012,12 @@ Please open a browser window and type in: http://localhost:%1. Unable to start the server to port %1: %2. - 無法啟動伺服器埠 %1:%2。 + 無法啟動伺服器埠 %1:%2. Unable to open your system browser. - 無法打開您的系統瀏覽器。 + 無法打開您的系統瀏覽器. @@ -9035,7 +9032,7 @@ Please open a browser window and type in: http://localhost:%1. Not enough memory available to display the data. - 沒有足夠的記憶體可用來顯示資料。 + 沒有足夠的記憶體可用來顯示資料. @@ -9082,17 +9079,17 @@ Please open a browser window and type in: http://localhost:%1. If you don't save, your changes will be lost. - 若不儲存將會失去所有修改 + 若不儲存將會失去所有修改. Apply answer to all - Apply answer to all + 將回答套用到全部 %1 Document(s) not saved - %1 Document(s) not saved + %1 檔案未儲存 @@ -9117,7 +9114,7 @@ Please open a browser window and type in: http://localhost:%1. Delete group content? - 刪除群組內容？ + 刪除群組內容? @@ -9137,7 +9134,7 @@ Please open a browser window and type in: http://localhost:%1. Toggle active part - Toggle active part + 切換啟用中的零件 @@ -9148,19 +9145,19 @@ Please open a browser window and type in: http://localhost:%1. Simple group - Simple group + 簡單群組 Group with links - Group with links + 帶連結的群組 Group with transform links - Group with transform links + 帶有變換連結的群組 @@ -9180,7 +9177,7 @@ Please open a browser window and type in: http://localhost:%1. Unlink failed - Unlink failed + 取消連結失敗 @@ -9190,18 +9187,18 @@ Please open a browser window and type in: http://localhost:%1. Failed to import links - Failed to import links + 匯入連結失敗 Failed to import all links - Failed to import all links + 匯入所有連結失敗 Invalid name - Invalid name + 無效的名稱 @@ -9213,7 +9210,7 @@ underscore, and must not start with a digit. The property '%1' already exists in '%2' - The property '%1' already exists in '%2' + 屬性'%1'已存在於'%2'中 @@ -9223,18 +9220,18 @@ underscore, and must not start with a digit. Failed to add property to '%1': %2 - Failed to add property to '%1': %2 + 無法將屬性增加到 '%1': %2 Drag & drop failed - Drag & drop failed + 拖放失敗 Setup configurable object - Setup configurable object + 可設定屬性對象 @@ -9249,7 +9246,7 @@ underscore, and must not start with a digit. Apply to all - Apply to all + 全部套用 @@ -9261,7 +9258,7 @@ option to apply only to this link. Copy on change - Copy on change + 更改時複製 @@ -9290,12 +9287,12 @@ Also auto redo the copy if the original linked object is changed. Disable copy on change - Disable copy on change + 取消更改時複製 Refresh configurable object - Refresh configurable object + 重新整理屬性對象 @@ -9311,7 +9308,7 @@ the current copy will be lost. Toggle array elements - Toggle array elements + 切換矩陣元素 @@ -9345,7 +9342,7 @@ the current copy will be lost. Not allowed: - 不允許： + 不允許: @@ -9360,7 +9357,7 @@ the current copy will be lost. Box element selection - Box element selection + 框元素選擇 @@ -9378,13 +9375,13 @@ the current copy will be lost. &About %1 - 關於 %1(&A) + 關於 %1 (&A) About %1 - 關於%1 + 關於 %1 @@ -9440,7 +9437,7 @@ the current copy will be lost. Align the selected objects - 對齊選定物件 + 對齊選定物體 @@ -9472,7 +9469,7 @@ the current copy will be lost. Cl&ose - &關閉 + 關閉(&O) @@ -9514,7 +9511,7 @@ the current copy will be lost. C&opy - 複製(&C) + 複製(&O) @@ -9548,7 +9545,7 @@ the current copy will be lost. Deletes the selected objects - 刪除所選的物件 + 刪除所選的物體 @@ -9556,13 +9553,13 @@ the current copy will be lost. View turntable... - 可旋轉視圖... + 視景旋轉台... View turntable - 可旋轉視圖 + 視景旋轉台 @@ -9576,7 +9573,7 @@ the current copy will be lost. Show the dependency graph of the objects in the active document - 顯示目前文件中物件相依圖 + 顯示目前文件中物體相依圖 @@ -9688,7 +9685,7 @@ the current copy will be lost. Change the draw style of the objects - Change the draw style of the objects + 更改物體的繪製樣式 @@ -9696,13 +9693,13 @@ the current copy will be lost. Duplicate selection - 複製選定物件 + 複製選定物體 Put duplicates of the selected objects to the active document - 於目前文件中貼上所複製之物件 + 於目前文件中貼上所複製之物體 @@ -9710,17 +9707,17 @@ the current copy will be lost. Toggle &Edit mode - 切換&編輯模式 + 切換編輯模式(&E) Toggles the selected object's edit mode - 切換所選的物件的編輯模式 + 切換所選的物體的編輯模式 Activates or Deactivates the selected object's edit mode - Activates or Deactivates the selected object's edit mode + 啟用或停用所選物體的編輯模式 @@ -9728,13 +9725,13 @@ the current copy will be lost. &Export... - 匯出(&E) + 匯出(&E)... Export an object in the active document - 從目前檔案中匯出物件 + 從目前檔案中匯出物體 @@ -9744,7 +9741,7 @@ the current copy will be lost. Select the objects to export before choosing Export. - Select the objects to export before choosing Export. + 在選擇匯出之前選擇要匯出的物體. @@ -9754,7 +9751,7 @@ the current copy will be lost. Expression actions - Expression actions + 表達式動作 @@ -9858,7 +9855,7 @@ the current copy will be lost. FreeCAD Website - FreeCAD網站 + FreeCAD 網站 @@ -9890,7 +9887,7 @@ the current copy will be lost. Create a new group for ordering objects - 建立用於排列物件的群組 + 建立用於排列物體的群組 @@ -9898,13 +9895,13 @@ the current copy will be lost. Hide all objects - 隱藏所有物件 + 隱藏所有物體 Hide all objects in the document - 隱藏檔案中的所有物件 + 隱藏檔案中的所有物體 @@ -9918,7 +9915,7 @@ the current copy will be lost. Hide all selected objects - 隱藏所有選取的物件 + 隱藏所有選取的物體 @@ -9926,7 +9923,7 @@ the current copy will be lost. &Import... - 匯入(&I) + 匯入(&I)... @@ -9952,7 +9949,7 @@ the current copy will be lost. Link actions - Link actions + 連結動作 @@ -9960,12 +9957,12 @@ the current copy will be lost. Import links - 匯入鏈結 + 匯入連結 Import selected external link(s) - Import selected external link(s) + 匯入選定的外部連結 @@ -9973,12 +9970,12 @@ the current copy will be lost. Import all links - 匯入所有鏈結 + 匯入所有連結 Import all links of the active document - Import all links of the active document + 匯入啟用文件的所有連結 @@ -9986,12 +9983,12 @@ the current copy will be lost. Make link - 建立鏈結 + 建立連結 Create a link to the selected object(s) - 建立已選物件的連結 + 建立已選物體的連結 @@ -9999,7 +9996,7 @@ the current copy will be lost. Make link group - 建立鏈結群組 + 建立連結群組 @@ -10012,12 +10009,12 @@ the current copy will be lost. Make sub-link - 建立子鏈結 + 建立子連結 Create a sub-object or sub-element link - Create a sub-object or sub-element link + 建立子物體或子元素連結 @@ -10030,7 +10027,7 @@ the current copy will be lost. Replace the selected object(s) with link - 使用連結取代選取的物件 + 使用連結取代選取的物體 @@ -10038,13 +10035,13 @@ the current copy will be lost. Link navigation - Link navigation + 連結導航 Link navigation actions - Link navigation actions + 連結導航動作 @@ -10052,12 +10049,12 @@ the current copy will be lost. Select all links - Select all links + 選取所有連結 Select all links to the current selected object - Select all links to the current selected object + 選擇目前選定物體的所有連結 @@ -10065,12 +10062,12 @@ the current copy will be lost. Go to linked object - Go to linked object + 轉到連結物體 Select the linked object and switch to its owner document - Select the linked object and switch to its owner document + 選擇連結物體並切換到其擁有的文件 @@ -10078,12 +10075,12 @@ the current copy will be lost. Go to the deepest linked object - Go to the deepest linked object + 轉到最底層的連結物體 Select the deepest linked object and switch to its owner document - Select the deepest linked object and switch to its owner document + 選擇最底層的連結物體並切換到其擁有的文件 @@ -10091,12 +10088,12 @@ the current copy will be lost. Unlink - Unlink + 取消連結 Strip on level of link - Strip on level of link + 在連結層級中脫離 @@ -10104,13 +10101,13 @@ the current copy will be lost. Attach to remote debugger... - Attach to remote debugger... + 附加到遠端偵錯程式... Attach to a remotely running debugger - Attach to a remotely running debugger + 附加到遠端執行中的偵錯程式 @@ -10196,7 +10193,7 @@ the current copy will be lost. Measures distance between two selected objects - 測量兩個選定物件之間的距離 + 測量兩個選定物體之間的距離 @@ -10217,12 +10214,12 @@ the current copy will be lost. %1 document (*.FCStd) - ％1文件（*.FCStd） + %1 文件（*.FCStd） Cannot merge project with itself. - 不能合併專案本身。 + 不能合併專案本身. @@ -10325,7 +10322,7 @@ the current copy will be lost. &Paste - &貼上 + 貼上(&P) @@ -10339,13 +10336,13 @@ the current copy will be lost. Placement... - 放置... + 放置位置... Place the selected objects - 放置所選物件 + 放置所選物體 @@ -10367,7 +10364,7 @@ the current copy will be lost. &Export PDF... - 匯出PDF(&E)... + 匯出 PDF(&E)... @@ -10381,7 +10378,7 @@ the current copy will be lost. &Print preview... - &預覽列印 + &P預覽列印... @@ -10399,7 +10396,7 @@ the current copy will be lost. Project i&nformation... - 專案訊息(&N)... + 專案資訊(&N)... @@ -10428,12 +10425,12 @@ the current copy will be lost. Python Website - Python網站 + Python 網站 The official Python website - Python官方網站 + Python 官方網站 @@ -10499,7 +10496,7 @@ the current copy will be lost. Redoes a previously undone action - 重做上次撤銷的操作 + 重做上次復原的操作 @@ -10507,7 +10504,7 @@ the current copy will be lost. &Refresh - 重新整理 + 重新整理(&R) @@ -10521,13 +10518,13 @@ the current copy will be lost. Report a bug - Report a bug + 回報錯誤 Report a bug or suggest a feature - Report a bug or suggest a feature + 回報錯誤或建議功能 @@ -10591,13 +10588,13 @@ the current copy will be lost. Save a &Copy... - 儲存副本(&C)... + 儲存備份(&C)... Save a copy of the active document under a new file name - 以新的檔案名稱儲存目前檔案的副本 + 以新的檔案名稱儲存目前檔案的備份 @@ -10619,13 +10616,13 @@ the current copy will be lost. &Back - &Back + 上一步(&B) Go back to previous selection - Go back to previous selection + 回到上一個選擇 @@ -10633,13 +10630,13 @@ the current copy will be lost. &Bounding box - &Bounding box + 邊界區塊(&B) Show selection bounding box - Show selection bounding box + 顯示選擇邊界區塊 @@ -10647,13 +10644,13 @@ the current copy will be lost. &Forward - &Forward + 往前(&F) Repeat the backed selection - Repeat the backed selection + 重複支持的選擇 @@ -10675,13 +10672,13 @@ the current copy will be lost. Select visible objects - 選取顯示中物件 + 選取顯示中物體 Select visible objects in the active document - 於編輯中檔案選取顯示中之物件 + 於編輯中檔案選取顯示中之物體 @@ -10689,13 +10686,13 @@ the current copy will be lost. &Send to Python Console - &Send to Python Console + 發送到 Python 控制台(&S) Sends the selected object to the Python console - Sends the selected object to the Python console + 將所選物體發送到 Python 控制台 @@ -10709,7 +10706,7 @@ the current copy will be lost. Sets the display properties of the selected object - 設置所選物件的顯示屬性 + 設聽所選物體的顯示屬性 @@ -10717,13 +10714,13 @@ the current copy will be lost. Show all objects - 顯示所有物件 + 顯示所有物體 Show all objects in the document - 在檔案中顯示所有物件 + 在檔案中顯示所有物體 @@ -10737,7 +10734,7 @@ the current copy will be lost. Show all selected objects - 顯示所有選取的物件 + 顯示所有選取的物體 @@ -10759,13 +10756,13 @@ the current copy will be lost. Add text document - 添加文字文件 + 增加文字文件 Add text document to active document - 添加文字文件至激活文件 + 增加文字文件至啟用文件 @@ -10773,7 +10770,7 @@ the current copy will be lost. Texture mapping... - 紋理映射... + 質感映射... @@ -10839,13 +10836,13 @@ the current copy will be lost. Toggle all objects - 切換所有物件 + 切換所有物體 Toggles visibility of all objects in the active document - 切換顯示活動文檔中的所有物件的可見性 + 切換顯示活動文件中的所有物體的可見性 @@ -10859,7 +10856,7 @@ the current copy will be lost. Toggles the property of the objects to get selected in the 3D-View - 切換物件性質於3D視圖中選取 + 切換物體性質於3D視圖中選取 @@ -10895,13 +10892,13 @@ the current copy will be lost. Transform... - 變換... + 轉換... Transform the geometry of selected objects - 所選物件的幾何變換 + 所選物體的幾何轉換 @@ -10915,7 +10912,7 @@ the current copy will be lost. Transform the selected object in the 3d view - 轉換於3D視圖中所選物件 + 轉換於3D視圖中所選物體 @@ -10923,7 +10920,7 @@ the current copy will be lost. Collapse selected item - Collapse selected item + 折疊所選項目 @@ -10937,7 +10934,7 @@ the current copy will be lost. Expand selected item - Expand selected item + 展開所選項目 @@ -10951,13 +10948,13 @@ the current copy will be lost. Select all instances - Select all instances + 選擇全部實例 Select all instances of the current selected object - Select all instances of the current selected object + 選擇目前選定物體的全部實例 @@ -10985,7 +10982,7 @@ the current copy will be lost. Undo exactly one action - 完全撤消一個動作 + 完全復原一個動作 @@ -10993,7 +10990,7 @@ the current copy will be lost. &Units calculator... - &單位計算機... + 單位計算機(&U)... @@ -11007,13 +11004,13 @@ the current copy will be lost. Edit mode - Edit mode + 編輯模式 Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + 定義從樹狀圖編輯物體時的行為 @@ -11041,7 +11038,7 @@ the current copy will be lost. Set to bottom view - 設置為底部視圖 + 設定為底部視圖 @@ -11069,7 +11066,7 @@ the current copy will be lost. Set to dimetric view - Set to dimetric view + 設定為二維圖視景 @@ -11147,13 +11144,13 @@ the current copy will be lost. Front - 前視圖 + 正視圖 Set to front view - 設置為前視圖 + 設定為前視圖 @@ -11161,13 +11158,13 @@ the current copy will be lost. Home - Home + 主視景 Set to default home view - Set to default home view + 設定為預設主視景 @@ -11189,7 +11186,7 @@ the current copy will be lost. Issue camera position - 設置攝影位置 + 設定攝影位置 @@ -11279,7 +11276,7 @@ the current copy will be lost. Set to left view - 設置為左視圖 + 設定為左視圖 @@ -11293,7 +11290,7 @@ the current copy will be lost. Set to rear view - 設置為後視圖 + 設定為後視圖 @@ -11301,13 +11298,13 @@ the current copy will be lost. Restore saved camera - Restore saved camera + 恢復已儲存的相機視野 Restore saved camera settings - Restore saved camera settings + 恢復已儲存的相機視野設定 @@ -11321,7 +11318,7 @@ the current copy will be lost. Set to right view - 設置為右視圖 + 設定為右視圖 @@ -11335,7 +11332,7 @@ the current copy will be lost. Rotate the view by 90° counter-clockwise - Rotate the view by 90° counter-clockwise + 逆時針90°旋轉視景 @@ -11349,7 +11346,7 @@ the current copy will be lost. Rotate the view by 90° clockwise - Rotate the view by 90° clockwise + 順時針90°旋轉視景 @@ -11357,13 +11354,13 @@ the current copy will be lost. Save current camera - Save current camera + 儲存相機視野 Save current camera settings - Save current camera settings + 儲存相機視野設定 @@ -11377,7 +11374,7 @@ the current copy will be lost. Set to top view - 設置為上視圖 + 設定為上視圖 @@ -11391,7 +11388,7 @@ the current copy will be lost. Set to trimetric view - Set to trimetric view + 設定為不等角立體視景 @@ -11405,7 +11402,7 @@ the current copy will be lost. Extend the FreeCAD 3D Window to a Oculus Rift - 延伸FreeCAD 3D視窗到Oculus Rift + 延伸FreeCAD 3D視窗到 Oculus Rift @@ -11413,7 +11410,7 @@ the current copy will be lost. &What's This? - 這是什麼(&W)？ + 這是什麼(&W)? @@ -11427,7 +11424,7 @@ the current copy will be lost. &Windows... - 視窗(&W) + 視窗(&W)... @@ -11471,7 +11468,7 @@ the current copy will be lost. Display the main window in fullscreen mode - Display the main window in fullscreen mode + 以全螢幕模式顯示主視窗 @@ -11507,13 +11504,13 @@ the current copy will be lost. Recall working view - Recall working view + 調用之前的工作檢視 Recall previously stored temporary working view - Recall previously stored temporary working view + 調用之前儲存的暫時工作檢視 @@ -11521,13 +11518,13 @@ the current copy will be lost. Store working view - Store working view + 儲存工作檢視 Store a document-specific temporary working view - Store a document-specific temporary working view + 儲存特定文件的暫時工作檢視 @@ -11535,13 +11532,13 @@ the current copy will be lost. Collapse/Expand - Collapse/Expand + 收合摺疊/展開 Expand active document and collapse all others - Expand active document and collapse all others + 展開啟用文件並折疊所有其他文件 @@ -11549,7 +11546,7 @@ the current copy will be lost. Initiate dragging - Initiate dragging + 開始拖動 @@ -11562,7 +11559,7 @@ the current copy will be lost. Multi document - Multi document + 多重文件 @@ -11576,7 +11573,7 @@ the current copy will be lost. Pre-selection - Pre-selection + 預先選擇 @@ -11589,7 +11586,7 @@ the current copy will be lost. Record selection - Record selection + 記錄選取項目 @@ -11616,7 +11613,7 @@ the current copy will be lost. Single document - Single document + 單一文件 @@ -11630,12 +11627,12 @@ the current copy will be lost. Sync placement - Sync placement + 同步放置位置 Auto adjust placement on drag and drop objects across coordinate systems - Auto adjust placement on drag and drop objects across coordinate systems + 自動調整跨坐標系統拖放物體的位置 @@ -11643,7 +11640,7 @@ the current copy will be lost. Sync selection - Sync selection + 同步選擇 @@ -11772,15 +11769,14 @@ the current copy will be lost. Are you sure you want to continue? - The following referencing objects might break. - -Are you sure you want to continue? + 以下引用物體可能會中斷. +你確定你要繼續嗎? Object dependencies - 物件相依 + 物體相依 @@ -11826,22 +11822,22 @@ Are you sure you want to continue? Hidden line - Hidden line + 隱藏線段 Hidden line mode - Hidden line mode + 隱藏線段模式 No shading - No shading + 無上色 No shading mode - No shading mode + 無上色模式 @@ -11869,14 +11865,14 @@ Are you sure you want to continue? Object dependencies - 物件相依 + 物體相依 To link to external objects, the document must be saved at least once. Do you want to save the document now? - To link to external objects, the document must be saved at least once. -Do you want to save the document now? + 要連結到外部物體，文件必須至少儲存一次. +您現在要儲存文件嗎? @@ -11895,10 +11891,10 @@ Do you want to save the document now? Please check the Report View for more details. Do you still want to proceed? - The document contains dependency cycles. -Please check the Report View for more details. + 該文件包含依賴循環. +請檢查報告視窗以獲取更多詳細資訊. -Do you still want to proceed? +你還想繼續嗎? @@ -11911,12 +11907,12 @@ Do you still want to proceed? This will discard all the changes since last file save. - 這將會放棄自前次儲存檔案後所有的變更 + 這將會放棄自前次儲存檔案後所有的變更. Do you want to continue? - 您要繼續嗎？ + 您要繼續嗎? @@ -11996,12 +11992,12 @@ Do you still want to proceed? Zoom to fit - Zoom to fit + 最適化縮放 Zoom so that model fills the view - Zoom so that model fills the view + 縮放使模型填滿視景 @@ -12059,7 +12055,7 @@ Do you still want to proceed? Visibility - 可見性 + 可見 @@ -12074,7 +12070,7 @@ Do you still want to proceed? &Macro - &巨集 + 巨集(&M) @@ -12114,12 +12110,12 @@ Do you still want to proceed? Special Ops - 特別行動 + 特別選項 Link actions - Link actions + 連結動作 @@ -12141,7 +12137,7 @@ Do you still want to proceed? Notification Area - Notification Area + 通知區域 @@ -12151,32 +12147,32 @@ Do you still want to proceed? The Notification area will appear in the status bar - The Notification area will appear in the status bar + 通知區域將出現在狀態欄中 Enable Notification Area - Enable Notification Area + 啟用通知區域 Non-intrusive notifications will appear next to the notification area in the status bar - Non-intrusive notifications will appear next to the notification area in the status bar + 非侵入式通知將出現在狀態欄中的通知區域旁邊 Enable non-intrusive notifications - Enable non-intrusive notifications + 啟用非侵入性的通知 Additional data Sources - Additional data Sources + 其他資料來源 Errors will appear in the notification area - Errors will appear in the notification area + 錯誤將出現在通知區域 @@ -12186,7 +12182,7 @@ Do you still want to proceed? Warnings will appear in the notification area - Warnings will appear in the notification area + 警告將出現在通知區域 @@ -12196,22 +12192,22 @@ Do you still want to proceed? Non-Intrusive Notifications - Non-Intrusive Notifications + 非侵入性的通知 Minimum Duration: - Minimum Duration: + 最短持續時間: Maximum Duration: - Maximum Duration: + 最長持續時間: Duration during which the notification will be shown (unless mouse buttons are clicked) - Duration during which the notification will be shown (unless mouse buttons are clicked) + 顯示通知的持續時間(除非點擊滑鼠按鈕) @@ -12222,72 +12218,72 @@ Do you still want to proceed? Minimum duration during which the notification will be shown (unless notification clicked) - Minimum duration during which the notification will be shown (unless notification clicked) + 顯示通知的最短持續時間(除非點擊滑鼠按鈕) Maximum Number of Notifications: - Maximum Number of Notifications: + 最多通知訊息數目: Maximum number of notifications that will be simultaneously present on the screen - Maximum number of notifications that will be simultaneously present on the screen + 將同時出現在螢幕上的最大通知數目 Notification width: - Notification width: + 通知寬度: Width of the notification in pixels - Width of the notification in pixels + 通知的寬度(以像素為單位) Any open non-intrusive notifications will disappear when another window is activated - Any open non-intrusive notifications will disappear when another window is activated + 當另一個視窗被啟用時，任何打開的非侵入式通知都會消失 Hide when other window is activated - Hide when other window is activated + 其他視窗作用中時隱藏 Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window - Prevent non-intrusive notifications from appearing when the FreeCAD Window is not the active window + 當 FreeCAD 視窗不是啟用視窗時，防止出現非侵入性通知 Do not show when inactive - Do not show when inactive + 非作用中時不顯示 Message List - Message List + 訊息清單 Limit the number of messages that will be kept in the list. If 0 there is no limit. - Limit the number of messages that will be kept in the list. If 0 there is no limit. + 限制將保留在列表中的訊息數目. 如果為 0 則沒有限制. Maximum Messages (0 = no limit): - Maximum Messages (0 = no limit): + 最多訊息數目 (0 = 沒有限制): Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. - Removes the user notifications from the message list after the non-intrusive maximum duration has lapsed. + 在非侵入性最長持續時間過去後，從訊息列表中刪除使用者通知. Auto-remove User Notifications - Auto-remove User Notifications + 自動刪除使用者通知 @@ -12306,13 +12302,13 @@ Do you still want to proceed? <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> Currently, your system has the following workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop. Additional workbenches can be installed through the addon manager.</p><p> -Currently, your system has the following workbenches:</p></body></html> + <html><head/><body><p>您可以通過拖放重新排序工作台. 可以通過附加元件管理器安裝其他工作台.</p><p> +目前，您的系統有以下工作台:</p></body></html> Start up workbench: - Start up workbench: + 啟動工作台: @@ -12323,7 +12319,7 @@ after FreeCAD launches Workbench selector position : - Workbench selector position : + 工作台選擇器位置: @@ -12332,11 +12328,11 @@ after FreeCAD launches 'Toolbar': In the toolbars, as a movable toolbar. 'Left Corner': In the menu bar, on the left corner. 'Right Corner': In the menu bar, on the right corner. - Customize where the workbench selector appears (restart required). + 自定義工作台選擇器出現的位置(需要重新啟動). -'Toolbar': In the toolbars, as a movable toolbar. -'Left Corner': In the menu bar, on the left corner. -'Right Corner': In the menu bar, on the right corner. +'工具列': 在工具列中，作為可移動的工具列. +'左側': 在功能表中的左側. +'右側': 在菜單欄的右右側. @@ -12359,7 +12355,7 @@ after FreeCAD launches Planes - Planes + 平面 @@ -12397,7 +12393,7 @@ after FreeCAD launches Planes - Planes + 平面 @@ -12447,7 +12443,7 @@ after FreeCAD launches Image size - Image size + 影像大小 @@ -12462,7 +12458,7 @@ after FreeCAD launches Keep aspect ratio - Keep aspect ratio + 保持長寬比 @@ -12518,7 +12514,7 @@ after FreeCAD launches Auto-load - Auto-load + 自動載入 @@ -12528,12 +12524,12 @@ after FreeCAD launches This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. - This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + 這是目前的啟動模組，必須自動載入. 請參閱 屬性/一般/自動載入 進行更改. Loaded - Loaded + 已載入 @@ -12556,12 +12552,12 @@ after FreeCAD launches Left corner - Left corner + 左邊角落 Right corner - Right corner + 右邊角落 @@ -12650,32 +12646,32 @@ after FreeCAD launches FRONT - FRONT + 正面 REAR - REAR + 背面 TOP - TOP + 上方 BOTTOM - BOTTOM + 底部 RIGHT - RIGHT + 右側 LEFT - LEFT + 左側 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index 494a9a6ec6..b7a831fa4b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -318,17 +318,17 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Edit Tags - Edit Tags + Upravit tagy Comma-separated list of tags describing this item: - Comma-separated list of tags describing this item: + Seznam štítků oddělených čárkami popisujících tuto položku: HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. - HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. + TIP: Běžné tagy zahrnují "Shromáždění", "MKP", "Mesh", "NURBS", atd. @@ -381,37 +381,37 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Edit Dependency - Edit Dependency + Upravit závislost Dependency Type - Dependency Type + Typ závislosti Dependency - Dependency + Závislost Package name, if "Other..." - Package name, if "Other..." + Název balíčku, pokud "ostatní..." NOTE: If "Other..." is selected, the package is not in the ALLOWED_PYTHON_PACKAGES.txt file, and will not be automatically installed by the Addon Manager. Submit a PR at <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> to request addition of a package. - NOTE: If "Other..." is selected, the package is not in the ALLOWED_PYTHON_PACKAGES.txt file, and will not be automatically installed by the Addon Manager. Submit a PR at <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> to request addition of a package. + POZNÁMKA: Pokud je vybrána "další...", balíček není v ALLOWED_PYTHON_PACKAGES. xt soubor a nebude automaticky nainstalován Správcem doplňků. Pošlete PR na <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> a požádejte o přidání balíčku. If this is an optional dependency, the Addon Manager will offer to install it (when possible), but will not block installation if the user chooses not to, or cannot, install the package. - If this is an optional dependency, the Addon Manager will offer to install it (when possible), but will not block installation if the user chooses not to, or cannot, install the package. + Pokud se jedná o volitelnou závislost, správce doplňků nabídne instalaci (je-li to možné), ale nebude blokovat instalaci, pokud se uživatel rozhodne, že balíček nenainstaluje nebo nemůže. Optional - Optional + Volitelné @@ -432,7 +432,7 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I <h1>Package Name</h1> - <h1>Package Name</h1> + <h1>Název balíčku</h1> @@ -444,7 +444,7 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I (tags) - (tags) + (štítky) @@ -456,7 +456,7 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Maintainer - Maintainer + Správce @@ -486,17 +486,17 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I License file - License file + Licenční soubory People - People + Lidé Kind - Kind + Druh @@ -506,7 +506,7 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Email - Email + E-mail @@ -514,22 +514,22 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Advanced Version Mapping - Advanced Version Mapping + Pokročilé mapování verze Upcoming versions of the FreeCAD Addon Manager will support developers' setting a specific branch or tag for use with a specific version of FreeCAD (e.g. setting a specific tag as the last version of your Addon to support v0.19, etc.) - Upcoming versions of the FreeCAD Addon Manager will support developers' setting a specific branch or tag for use with a specific version of FreeCAD (e.g. setting a specific tag as the last version of your Addon to support v0.19, etc.) + Nadcházející verze FreeCAD Addon Manageru budou podporovat vývojáře'apos; nastavení konkrétní větve nebo tagu pro použití s konkrétní verzí FreeCADu (např. nastavení konkrétního tagu jako poslední verze vašeho Addonu pro podporu v0.19 atd.) FreeCAD Version - FreeCAD Version + FreeCAD verze Best-available branch, tag, or commit - Best-available branch, tag, or commit + Nejlépe dostupná větev, značka nebo potvrzení @@ -537,28 +537,28 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Supported FreeCAD Versions - Supported FreeCAD Versions + Podporované verze FreeCAD Minimum FreeCAD Version Supported - Minimum FreeCAD Version Supported + Minimální verze FreeCAD je podporována Optional - Optional + Volitelné Maximum FreeCAD Version Supported - Maximum FreeCAD Version Supported + Maximální počet podporovaných verzí FreeCAD Advanced version mapping... - Advanced version mapping... + Rozšířené mapování verze... @@ -566,21 +566,21 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Addon manager options - Addon manager options + Možnosti správce doplňků If this option is selected, when launching the Addon Manager, installed addons will be checked for available updates (this requires the GitPython package installed on your system) - If this option is selected, when launching the Addon Manager, -installed addons will be checked for available updates -(this requires the GitPython package installed on your system) + Zvolíte-li tuto možnost, při spouštění správce doplňků, +nainstalované doplňky budou zkontrolovány pro dostupné aktualizace +(vyžaduje to balíček GitPythonu nainstalovaný ve vašem systému) Automatically check for updates at start (requires git) - Automatically check for updates at start (requires git) + Automaticky kontrolovat aktualizace při startu (vyžaduje git) @@ -590,42 +590,42 @@ installed addons will be checked for available updates Cache update frequency - Cache update frequency + Četnost aktualizace mezipaměti Manual (no automatic updates) - Manual (no automatic updates) + Ruční (bez automatických aktualizací) Daily - Daily + Denně Weekly - Weekly + Týdně Hide Addons marked Python 2 Only - Hide Addons marked Python 2 Only + Skrýt doplňky označené pouze Python 2 Hide Addons marked Obsolete - Hide Addons marked Obsolete + Skrýt Zastaralé doplňky Hide Addons that require a newer version of FreeCAD - Hide Addons that require a newer version of FreeCAD + Skrýt doplňky, které vyžadují novější verzi FreeCADu Custom repositories - Custom repositories + Vlastní repozitáře @@ -640,7 +640,7 @@ installed addons will be checked for available updates User system proxy - User system proxy + Proxy uživatelského systému @@ -650,47 +650,47 @@ installed addons will be checked for available updates Python executable (optional): - Python executable (optional): + Python spustitelný soubor (volitelný): The path to the Python executable for package installation with pip. Autodetected if needed and not specified. - The path to the Python executable for package installation with pip. Autodetected if needed and not specified. + Cesta k spustitelnému programu Pythonu pro instalaci balíčku s pipem. V případě potřeby se automaticky objevilo a není zadáno. git executable (optional): - git executable (optional): + spustitelný git (volitelný): The path to the git executable. Autodetected if needed and not specified. - The path to the git executable. Autodetected if needed and not specified. + Cesta k git spustitelnému souboru. Automaticky nalezeno, pokud je potřeba a není zadáno. Advanced Options - Advanced Options + Pokročilá nastavení Show option to change branches (requires git) - Show option to change branches (requires git) + Zobrazit možnost změny větví (vyžaduje git) Disable git (fall back to ZIP downloads only) - Disable git (fall back to ZIP downloads only) + Zakázat git (pouze pro stahování ZIP) Activate Addon Manager options intended for developers of new Addons. - Activate Addon Manager options intended for developers of new Addons. + Aktivujte možnosti doplňků správce obsahu určené pro vývojáře nových doplňků. Addon developer mode - Addon developer mode + Režim pro vývojáře @@ -703,17 +703,17 @@ installed addons will be checked for available updates Uninstalls a selected macro or workbench - Uninstalls a selected macro or workbench + Odinstaluje vybrané makro nebo pracovní stůl Install - Install + Instalovat Uninstall - Uninstall + Odinstalovat @@ -723,12 +723,12 @@ installed addons will be checked for available updates Run Macro - Run Macro + Spustit makro Change branch - Change branch + Změnit větev @@ -736,42 +736,42 @@ installed addons will be checked for available updates Manage Python Dependencies - Manage Python Dependencies + Spravovat závislosti Pythonu The following Python packages have been installed locally by the Addon Manager to satisfy Addon dependencies. Installation location: - The following Python packages have been installed locally by the Addon Manager to satisfy Addon dependencies. Installation location: + Následující balíky Pythonu byly lokálně nainstalovány Správcem doplňků pro uspokojení závislostí doplňků. Umístění instalace: Package name - Package name + Název balíčku Installed version - Installed version + Nainstalovaná verze Available version - Available version + Dostupná verze Used by - Used by + Použito An asterisk (*) in the "Used by" column indicates an optional dependency. Note that Used by only records direct imports in the Addon. Other Python packages that those packages depend upon may have been installed as well. - An asterisk (*) in the "Used by" column indicates an optional dependency. Note that Used by only records direct imports in the Addon. Other Python packages that those packages depend upon may have been installed as well. + Hvězdička (*) v "používaném ve sloupci" označuje volitelnou závislost. Všimněte si, že používají pouze přímé importy v doplňku. Ostatní balíky v Pythonu, na kterých závisí, mohou být také nainstalovány. Update all available - Update all available + Aktualizovat všechny dostupné @@ -792,12 +792,12 @@ installed addons will be checked for available updates Updating Addons - Updating Addons + Aktualizace doplňků Updating out-of-date addons... - Updating out-of-date addons... + Aktualizace zastaralých doplňků... @@ -805,12 +805,12 @@ installed addons will be checked for available updates Content Item - Content Item + Položka obsahu Content type: - Content type: + Typ obsahu: @@ -820,7 +820,7 @@ installed addons will be checked for available updates Preference Pack - Preference Pack + Předvolby balíčku @@ -830,22 +830,22 @@ installed addons will be checked for available updates If this is the only thing in the Addon, all other metadata can be inherited from the top level, and does not need to be specified here. - If this is the only thing in the Addon, all other metadata can be inherited from the top level, and does not need to be specified here. + Pokud je to jediná věc v Addon, lze všechna ostatní metadata zdědit z nejvyšší úrovně, a zde není třeba uvádět. This is the only item in the Addon - This is the only item in the Addon + Toto je jediná položka v doplňku Main macro file - Main macro file + Hlavní makro soubor The file with the macro's metadata in it - The file with the macro's metadata in it + Soubor s makro's metadaty v něm @@ -862,22 +862,22 @@ installed addons will be checked for available updates Workbench class name - Workbench class name + Název třídy pracovního stolu Class that defines "Icon" data member - Class that defines "Icon" data member + Třída definovaná "Ikona" datovým členem Subdirectory - Subdirectory + Podadresář Optional, defaults to name of content item - Optional, defaults to name of content item + Nepovinné, výchozí hodnota názvu položky obsahu @@ -887,37 +887,37 @@ installed addons will be checked for available updates actualIcon - actualIcon + actualIcon Optional, defaults to inheriting from top-level Addon - Optional, defaults to inheriting from top-level Addon + Volitelné, výchozí zdědění z nejvyšší úrovně Tags... - Tags... + Tagy... Dependencies... - Dependencies... + Závislosti... FreeCAD Versions... - FreeCAD Versions... + FreeCAD verze... Other Metadata - Other Metadata + Další metadata Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD". - Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD". + Zobrazeno ve správci doplňků's seznamu doplňků. Nemělo by obsahovat slovo "FreeCAD". @@ -947,7 +947,7 @@ installed addons will be checked for available updates Any fields left blank are inherited from the top-level Addon metadata, so technically they are all optional. For Addons with multiple content items, each item should provide a unique Display Name and Description. - Any fields left blank are inherited from the top-level Addon metadata, so technically they are all optional. For Addons with multiple content items, each item should provide a unique Display Name and Description. + Všechna pole, která zůstávají prázdná, jsou zděděna z metadat nejvyšší úrovně, takže jsou technicky nepovinná. Pro doplňky s více položkami obsahu by každá položka měla poskytnout jedinečný zobrazovaný název a popis. @@ -955,27 +955,27 @@ installed addons will be checked for available updates Add button? - Add button? + Přidat tlačítko? Add a toolbar button for this macro? - Add a toolbar button for this macro? + Přidat pro toto makro tlačítko panelu nástrojů? Yes - Yes + Ano No - No + Ne Never - Never + Nikdy @@ -983,12 +983,12 @@ installed addons will be checked for available updates Change Branch - Change Branch + Změnit větev Change to branch or tag: - Change to branch or tag: + Vliv na větev nebo značku: @@ -996,17 +996,17 @@ installed addons will be checked for available updates Copyright Information - Copyright Information + Informace o autorských právech Copyright holder: - Copyright holder: + Držitel autorských práv: Copyright year: - Copyright year: + Autorská práva rok: @@ -1014,12 +1014,12 @@ installed addons will be checked for available updates Add Person - Add Person + Přidat osobu A maintainer is someone with current commit access on this project. An author is anyone else you'd like to give credit to. - A maintainer is someone with current commit access on this project. An author is anyone else you'd like to give credit to. + Správce je někdo s aktuálním přístupem k commitu na tento projekt. Autor je kdokoliv jiný,'byste rádi udělili kredit. @@ -1029,12 +1029,12 @@ installed addons will be checked for available updates Email: - Email: + E-mail: Email is required for maintainers, and optional for authors. - Email is required for maintainers, and optional for authors. + E-mail je vyžadován pro správce a pro autory je volitelný. @@ -1042,42 +1042,42 @@ installed addons will be checked for available updates Proxy login required - Proxy login required + Je vyžadováno přihlášení přes proxy Proxy requires authentication - Proxy requires authentication + Proxy vyžaduje autentizaci Proxy: - Proxy: + Proxy: Placeholder for proxy address - Placeholder for proxy address + Zástupný symbol pro adresu proxy Realm: - Realm: + Realm: Placeholder for proxy realm - Placeholder for proxy realm + Zástupný symbol pro proxy říši Username - Username + Jméno uživatele Password - Password + Heslo @@ -1085,27 +1085,27 @@ installed addons will be checked for available updates Select a license - Select a license + Vyberte licenci About... - About... + O aplikaci... License name: - License name: + Název licence: Path to license file: - Path to license file: + Cesta k licenčnímu souboru: (if required by license) - (if required by license) + (vyžaduje-li to licence) @@ -1115,7 +1115,7 @@ installed addons will be checked for available updates Create... - Create... + Vytvořit... @@ -1126,17 +1126,17 @@ installed addons will be checked for available updates Select Toolbar - Select Toolbar + Vybrat nástrojovou lištu Select a toolbar to add this macro to: - Select a toolbar to add this macro to: + Vyberte nástrojovou lištu pro přidání tohoto makra do: Ask every time - Ask every time + Pokaždé se zeptat @@ -1145,27 +1145,27 @@ installed addons will be checked for available updates Add button? - Add button? + Přidat tlačítko? Add a toolbar button for this macro? - Add a toolbar button for this macro? + Přidat pro toto makro tlačítko panelu nástrojů? Yes - Yes + Ano No - No + Ne Never - Never + Nikdy @@ -1178,51 +1178,51 @@ installed addons will be checked for available updates Starting up... - Starting up... + Zahájení... Loading addon information - Loading addon information + Načítání informací o doplňku Worker process {} is taking a long time to stop... - Worker process {} is taking a long time to stop... + Pracovní proces {} trvá dlouho, než se zastaví... Previous cache process was interrupted, restarting... - Previous cache process was interrupted, restarting... + Předchozí proces mezipaměti byl přerušen, restartuji... Custom repo list changed, forcing recache... - Custom repo list changed, forcing recache... + Seznam vlastních repozitářů byl změněn, vynucování recache... Addon manager - Addon manager + Správce rozšíření You must restart FreeCAD for changes to take effect. - You must restart FreeCAD for changes to take effect. + Aby se změny projevily, musíte FreeCAD restartovat. Restart now - Restart now + Restartovat nyní Restart later - Restart later + Restartovat později @@ -1233,42 +1233,42 @@ installed addons will be checked for available updates Updating cache... - Updating cache... + Aktualizuji mezipaměť... Could not find addon '{}' to select - Could not find addon '{}' to select + Nelze najít doplněk '{}' pro výběr Checking for updates... - Checking for updates... + Hledání aktualizací... Apply {} update(s) - Apply {} update(s) + Aplikovat {} aktualizace (s) No updates available - No updates available + Nejsou k dispozici žádné aktualizace Cannot launch a new installer until the previous one has finished. - Cannot launch a new installer until the previous one has finished. + Nelze spustit nový instalační program, dokud nebude ukončena předchozí instalace. Execution of macro failed. See console for failure details. - Execution of macro failed. See console for failure details. + Provedení makra selhalo. Podrobnosti o selhání viz konzola. @@ -1276,7 +1276,7 @@ installed addons will be checked for available updates Maintainer - Maintainer + Správce @@ -1289,17 +1289,17 @@ installed addons will be checked for available updates New Python Version Detected - New Python Version Detected + Byla zjištěna nová verze Pythonu This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? - This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? + Zdá se, že tato verze Pythonu byla poprvé použita spolu se Správcem doplňků. Přejete si nainstalovat stejné automaticky nainstalované závislosti? Processing, please wait... - Processing, please wait... + Zpracovávání, čekejte prosím... @@ -1310,73 +1310,73 @@ installed addons will be checked for available updates Updating... - Updating... + Probíhá aktualizace... Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") + Nepodařilo se importovat QtNetwork -- zdá se, že není nainstalován ve vašem systému. Váš poskytovatel může mít balíček pro tuto závislost (často nazývaný "python3-pyside2.qtnetwork") Failed to convert the specified proxy port '{}' to a port number - Failed to convert the specified proxy port '{}' to a port number + Nepodařilo se převést zadaný port proxy '{}' na číslo portu Parameter error: mutually exclusive proxy options set. Resetting to default. - Parameter error: mutually exclusive proxy options set. Resetting to default. + Chyba parametru: oboustranně exkluzivní nastavení proxy možností. Resetování na výchozí. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - Parameter error: user proxy indicated, but no proxy provided. Resetting to default. + Chyba parametru: indikován uživatelský proxy server, ale není k dispozici. Resetování na výchozí. Addon Manager: Unexpected {} response from server - Addon Manager: Unexpected {} response from server + Správce doplňků: Neočekávaná {} odpověď od serveru Error with encrypted connection - Error with encrypted connection + Chyba šifrovaného připojení Confirm remove - Confirm remove + Potvrdit odstranění Are you sure you want to uninstall {}? - Are you sure you want to uninstall {}? + Opravdu chcete odinstalovat {}? Removing Addon - Removing Addon + Odstraňování doplňku Removing {} - Removing {} + Odstranění {} Uninstall complete - Uninstall complete + Odinstalace dokončena Uninstall failed - Uninstall failed + Odinstalace se nezdařila @@ -1386,17 +1386,17 @@ installed addons will be checked for available updates Version {version} installed on {date} - Version {version} installed on {date} + Verze {version} nainstalována v {date} Version {version} installed - Version {version} installed + Verze {version} nainstalována Installed on {date} - Installed on {date} + Nainstalováno na {date} @@ -1404,145 +1404,145 @@ installed addons will be checked for available updates Installed - Installed + Nainstalováno On branch {}, update available to version - On branch {}, update available to version + Na větev {}, je k dispozici aktualizace Update available to version - Update available to version + Aktualizace je dostupná na verzi An update is available - An update is available + K dispozici je aktualizace Git tag '{}' checked out, no updates possible - Git tag '{}' checked out, no updates possible + Git značka '{}' prošla kontrolou, žádná aktualizace není možná This is the latest version available for branch {} - This is the latest version available for branch {} + Toto je nejnovější verze dostupná pro větev {} Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use + Aktualizováno, prosím restartujte FreeCAD pro použití Update check in progress - Update check in progress + Probíhá kontrola aktualizací Automatic update checks disabled - Automatic update checks disabled + Automatická kontrola aktualizací zakázána Installation location - Installation location + Umístění instalace WARNING: This addon is obsolete - WARNING: This addon is obsolete + VAROVÁNÍ: Tento doplněk je zastaralý WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + VAROVÁNÍ: Tento doplněk je pouze Python 2 WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + VAROVÁNÍ: Tento doplněk vyžaduje FreeCAD WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. + VAROVÁNÍ: Tento doplněk je v současné době nainstalován, ale je zakázán. Použijte tlačítko 'povolit' pro opětovné povolení. No URL or wiki page provided by this macro - No URL or wiki page provided by this macro + Žádné URL nebo wiki stránky poskytnuté tímto makrem Could not load README data from URL {} - Could not load README data from URL {} + Nelze načíst data README z URL {} This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Tento doplněk bude povolen při příštím restartu FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Tento doplněk bude zakázán při příštím restartu FreeCAD. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + QtWebEngine bindings Python není nainstalován -- používá záložní README displej. Success - Success + Úspěšně Branch change succeeded, please restart to use the new version. - Branch change succeeded, please restart to use the new version. + Změna větve se podařila, prosím restartujte pro použití nové verze. Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. + Změněno na git ref '{}' -- restartujte prosím pro použití Addon. Page JavaScript reported - Page JavaScript reported + Stránka JavaScript nahlášena Install - Install + Instalovat Uninstall - Uninstall + Odinstalovat Check for Update - Check for Update + Zkontrolovat aktualizace Run Macro - Run Macro + Spustit makro Change Branch - Change Branch + Změnit větev @@ -1557,90 +1557,90 @@ installed addons will be checked for available updates Return to package list - Return to package list + Zpět na seznam balíčků The page is taking a long time to load... showing the data we have so far... - The page is taking a long time to load... showing the data we have so far... + Stránka trvá dlouho... načtení dat, která máme doposud... Checking connection - Checking connection + Ověřování připojení Checking for connection to GitHub... - Checking for connection to GitHub... + Kontrola připojení k GitHubu... Connection failed - Connection failed + Připojení se nezdařilo Missing dependency - Missing dependency + Chybějící závislost Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. - Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + Nepodařilo se importovat QtNetwork -- podrobnosti viz Zobrazení reportu. Správce doplňků není k dispozici. Other... For providing a license other than one listed - Other... + Ostatní... Select the corresponding license file in your Addon - Select the corresponding license file in your Addon + Vyberte odpovídající licenční soubor ve vašem doplňku Location for new license file - Location for new license file + Umístění nového licenčního souboru Received {} response code from server - Received {} response code from server + Obdržen {} kód odpovědi od serveru Failed to install macro {} - Failed to install macro {} + Nepodařilo se nainstalovat macro {} Unrecognized content kind '{}' - Unrecognized content kind '{}' + Nerozpoznaný typ obsahu '{}' Unable to locate icon at {} - Unable to locate icon at {} + Ikonu na {} nelze najít Select an icon file for this content item - Select an icon file for this content item + Vyberte soubor ikony pro tuto položku obsahu {} is not a subdirectory of {} - {} is not a subdirectory of {} + {} není podadresář {} Select the subdirectory for this content item - Select the subdirectory for this content item + Vyberte podadresář pro tuto položku obsahu @@ -1660,43 +1660,43 @@ installed addons will be checked for available updates Python - Python + Python Yes - Yes + Ano Internal Workbench - Internal Workbench + Interní pracovní stůl External Addon - External Addon + Externí doplněk Python Package - Python Package + Python Package Other... - Other... + Ostatní... This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: - This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + Tento doplněk vyžaduje balíky Pythonu, které nejsou nainstalovány a nelze je nainstalovat automaticky. Chcete-li použít tento pracovní stůl musíte nainstalovat následující balíky Pythonu ručně: Too many to list - Too many to list + Příliš mnoho k zobrazení seznamu @@ -1706,136 +1706,136 @@ installed addons will be checked for available updates Missing Requirement - Missing Requirement + Chybějící požadavek Addon '{}' requires '{}', which is not available in your copy of FreeCAD. - Addon '{}' requires '{}', which is not available in your copy of FreeCAD. + Doplněk '{}' vyžaduje '{}', což není k dispozici ve vaší kopii FreeCAD. Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: - Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: + Doplněk '{}' vyžaduje následující pracovní prostředí, která nejsou dostupná ve vaší kopii FreeCAD: Press OK to install anyway. - Press OK to install anyway. + Stiskněte OK pro instalaci. Incompatible Python version - Incompatible Python version + Nekompatibilní verze Pythonu This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. - This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. + Tento doplněk (nebo jeden v případě závislostí) vyžaduje Python {}.{} a váš systém běží {}.{}. Instalace zrušena. Optional dependency on {} ignored because it is not in the allow-list - Optional dependency on {} ignored because it is not in the allow-list + Volitelná závislost na {} ignorována, protože není v seznamu povolenek Installing dependencies - Installing dependencies + Instalace závislostí Cannot execute Python - Cannot execute Python + Python nelze spustit Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. - Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + Nepodařilo se automaticky najít váš spustitelný program Pythonu, nebo je nastavena cesta nesprávně. Zkontrolujte prosím nastavení nastavení nastavení správce doplňků pro cestu k Pythonu. Dependencies could not be installed. Continue with installation of {} anyway? - Dependencies could not be installed. Continue with installation of {} anyway? + Závislosti nelze nainstalovat. Chcete přesto pokračovat s instalací {} {}? Cannot execute pip - Cannot execute pip + Nelze spustit pip Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: - Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: + Spuštění pipu se nezdařilo, což může chybět ve vaší instalaci v Pythonu. Ujistěte se, že váš systém má pip nainstalovaný a opakujte akci. Neúspěšný příkaz byl: Continue with installation of {} anyway? - Continue with installation of {} anyway? + Chcete přesto pokračovat s instalací {}? Package installation failed - Package installation failed + Instalace balíčku se nezdařila See Report View for detailed failure log. - See Report View for detailed failure log. + Detailní protokol selhání, viz Report View. Installing Addon - Installing Addon + Instalovat doplňky Installing FreeCAD Addon '{}' - Installing FreeCAD Addon '{}' + Instalace FreeCAD doplňku '{}' Cancelling - Cancelling + Rušení Cancelling installation of '{}' - Cancelling installation of '{}' + Ruší se instalace '{}' {} was installed successfully - {} was installed successfully + {} byl úspěšně nainstalován Installation Failed - Installation Failed + Instalace se nezdařila Failed to install {} - Failed to install {} + Nepodařilo se nainstalovat {} Create new toolbar - Create new toolbar + Vytvořit nový panel nástrojů A macro installed with the FreeCAD Addon Manager - A macro installed with the FreeCAD Addon Manager + Makro nainstalované ve správci doplňků FreeCAD @@ -1847,22 +1847,22 @@ installed addons will be checked for available updates Unable to read data from GitHub: check your internet connection and proxy settings and try again. - Unable to read data from GitHub: check your internet connection and proxy settings and try again. + Nelze číst data z GitHubu: zkontrolujte připojení k Internetu a nastavení proxy a zkuste to znovu. XML failure while reading metadata from file {} - XML failure while reading metadata from file {} + XML selhal při čtení metadat ze souboru {} Invalid metadata in file {} - Invalid metadata in file {} + Neplatná metadata v souboru {} WARNING: Path specified in package.xml metadata does not match currently checked-out branch. - WARNING: Path specified in package.xml metadata does not match currently checked-out branch. + VAROVÁNÍ: Cesta zadaná v souboru package.xml metadata neodpovídají aktuálně kontrolované větvi. @@ -1882,7 +1882,7 @@ installed addons will be checked for available updates Subdirectory - Subdirectory + Podadresář @@ -1892,33 +1892,33 @@ installed addons will be checked for available updates Select the folder containing your Addon - Select the folder containing your Addon + Vyberte složku obsahující doplněk No Vermin, cancelling operation. NOTE: Vermin is a Python package and proper noun - do not translate - No Vermin, cancelling operation. + Žádné Vermin, zrušení operace. Scanning Addon for Python version compatibility - Scanning Addon for Python version compatibility + Skenování doplňku pro kompatibilitu verze Pythonu Minimum Python Version Detected - Minimum Python Version Detected + Zjištěna minimální verze Pythonu Vermin auto-detected a required version of Python 3.{} - Vermin auto-detected a required version of Python 3.{} + Vermin automaticky detekoval požadovanou verzi Pythonu 3.{} Install Vermin? - Install Vermin? + Instalovat Vermin? @@ -1928,60 +1928,60 @@ installed addons will be checked for available updates Attempting to install Vermin from PyPi - Attempting to install Vermin from PyPi + Pokus o instalaci Vermin z PyPi Installation failed - Installation failed + Instalace se nezdařila Failed to install Vermin -- check Report View for details. 'Vermin' is the name of a Python package, do not translate - Failed to install Vermin -- check Report View for details. + Nepodařilo se nainstalovat Vermin -- Zkontrolujte Report View pro podrobnosti. Failed to import vermin after installation -- cannot scan Addon. 'vermin' is the name of a Python package, do not translate - Failed to import vermin after installation -- cannot scan Addon. + Nepodařilo se importovat vermin po instalaci -- Nelze skenovat Addon. Select an icon file for this package - Select an icon file for this package + Vyberte soubor ikony pro tento balíček Filter is valid - Filter is valid + Filtr je platný Filter regular expression is invalid - Filter regular expression is invalid + Regulární výraz filtru je neplatný Click for details about package {} - Click for details about package {} + Klikněte pro podrobnosti o balíčku {} Click for details about workbench {} - Click for details about workbench {} + Klikněte pro podrobnosti o pracovním prostředí {} Click for details about macro {} - Click for details about macro {} + Klikněte pro podrobnosti o makro {} Maintainers: - Maintainers: + Správci: @@ -1991,57 +1991,57 @@ installed addons will be checked for available updates updated - updated + aktualizováno Up-to-date - Up-to-date + Aktualizováno Update available - Update available + K dispozici je aktualizace Pending restart - Pending restart + Čekající restart DISABLED - DISABLED + VYPNOUT Installed version - Installed version + Nainstalovaná verze Unknown version - Unknown version + Neznámá verze Installed on - Installed on + Nainstalováno Available version - Available version + Dostupná verze Show Addons containing: - Show Addons containing: + Zobrazit doplňky obsahující: @@ -2061,7 +2061,7 @@ installed addons will be checked for available updates Preference Packs - Preference Packs + Předvolby balíčků @@ -2076,7 +2076,7 @@ installed addons will be checked for available updates Not installed - Not installed + Není nainstalováno @@ -2091,22 +2091,22 @@ installed addons will be checked for available updates DANGER: Developer feature - DANGER: Developer feature + DANGER: Funkce vývojáře DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? - DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? + DANGER: Přepínací větve jsou určeny pro vývojáře a beta testery a mohou mít za následek rozbití, dokumenty, které nejsou zpětně slučitelné, nestabilita, havárie a/nebo předčasná tepelná smrt vesmíru. Jste si jisti, že chcete pokračovat? There are local changes - There are local changes + Existují lokální změny WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? - WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? + VAROVÁNÍ: Tento repozitář má neprovedené místní změny. Jste si jisti, že chcete změnit větve (přináší změny s vámi)? @@ -2126,13 +2126,13 @@ installed addons will be checked for available updates Kind Table header for git ref type (e.g. either Tag or Branch) - Kind + Druh Local name Table header for git ref name - Local name + Místní jméno @@ -2144,268 +2144,268 @@ installed addons will be checked for available updates Local updated Table header for git update time of local branch - Local updated + Místno aktualizováno Remote updated Table header for git update time of remote branch - Remote updated + Vzdálené aktualizace Installation of Python package {} failed - Installation of Python package {} failed + Instalace Pythonu {} selhala Installation of optional package failed - Installation of optional package failed + Instalace volitelného balíčku selhala Installing required dependency {} - Installing required dependency {} + Instalace požadované závislosti {} Installation of Addon {} failed - Installation of Addon {} failed + Instalace doplňku {} selhala Downloaded package.xml for {} - Downloaded package.xml for {} + Stažený package.xml pro {} Failed to decode {} file for Addon '{}' - Failed to decode {} file for Addon '{}' + Nepodařilo se dekódovat {} soubor pro Addon '{}' Any dependency information in this file will be ignored - Any dependency information in this file will be ignored + Informace o závislosti v tomto souboru budou ignorovány Downloaded metadata.txt for {} - Downloaded metadata.txt for {} + Stažená metadata.txt pro {} Downloaded requirements.txt for {} - Downloaded requirements.txt for {} + Stažené požadavkys.txt pro {} Downloaded icon for {} - Downloaded icon for {} + Stažená ikona pro {} Unable to open macro wiki page at {} - Unable to open macro wiki page at {} + Nelze otevřít makro wiki stránku na {} Unable to fetch the code of this macro. - Unable to fetch the code of this macro. + Nelze načíst kód tohoto makra. Unable to retrieve a description from the wiki for macro {} - Unable to retrieve a description from the wiki for macro {} + Nelze načíst popis z wiki pro makro {} Unable to open macro code URL {} - Unable to open macro code URL {} + Nelze otevřít makro kód URL {} Unable to fetch macro-specified file {} from {} - Unable to fetch macro-specified file {} from {} + Nelze načíst makrostanovený soubor {} od {} Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Nelze najít makrospecifikovaný soubor {} (očekáváno v {}) {}: Unrecognized internal workbench '{}' - {}: Unrecognized internal workbench '{}' + {}: Nerozpoznaný interní pracovní stůl '{}' Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) + Varování pro vývojáře doplňku: URL adresa repozitáře nastavená v souboru addon {} ({}) neodpovídá URL adrese, ze které byla načtena ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) + Varování pro vývojáře doplňku: větev repozitáře nastavená v souboru package.xml pro addon {} ({}) neodpovídá větvi, ze které byla načtena ({}) Got an error when trying to import {} - Got an error when trying to import {} + Došlo k chybě při pokusu o import {} An unknown error occurred - An unknown error occurred + Došlo k neznámé chybě Could not find addon {} to remove it. - Could not find addon {} to remove it. + Doplněk {} nelze najít. Execution of Addon's uninstall.py script failed. Proceeding with uninstall... - Execution of Addon's uninstall.py script failed. Proceeding with uninstall... + Provedení uninstall.py skriptu addon's selhalo. Pokračujte s odinstalování... Removed extra installed file {} - Removed extra installed file {} + Odstraněný extra nainstalovaný soubor {} Error while trying to remove extra installed file {} - Error while trying to remove extra installed file {} + Chyba při pokusu o odstranění extra nainstalovaného souboru {} Error while trying to remove macro file {}: - Error while trying to remove macro file {}: + Chyba při pokusu o odstranění makro souboru {}: Failed to connect to GitHub. Check your connection and proxy settings. - Failed to connect to GitHub. Check your connection and proxy settings. + Nepodařilo se připojit k GitHubu. Zkontrolujte nastavení připojení a proxy serveru. WARNING: Duplicate addon {} ignored - WARNING: Duplicate addon {} ignored + VAROVÁNÍ: Duplikovat doplněk {} ignorován Workbenches list was updated. - Workbenches list was updated. + Seznam pracovních lavic byl aktualizován. Git is disabled, skipping git macros - Git is disabled, skipping git macros + Git je zakázán, přeskakuji git makra Attempting to change non-git Macro setup to use git - Attempting to change non-git Macro setup to use git + Pokouším se změnit nastavení negit makra pro použití gitu An error occurred updating macros from GitHub, trying clean checkout... - An error occurred updating macros from GitHub, trying clean checkout... + Došlo k chybě při aktualizaci maker z GitHubu, pokusu o vyčištění pokladny... Attempting to do a clean checkout... - Attempting to do a clean checkout... + Pokus o vyčištění pokladny... Clean checkout succeeded - Clean checkout succeeded + Vymazání platby bylo úspěšné Failed to update macros from GitHub -- try clearing the Addon Manager's cache. - Failed to update macros from GitHub -- try clearing the Addon Manager's cache. + Aktualizace maker z GitHub se nezdařila – zkuste vymazat mezipaměť Správce doplňků's. Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time - Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time + Chyba při připojování k Wiki, FreeCAD momentálně nemůže načíst Wiki makro seznam Unable to fetch git updates for workbench {} - Unable to fetch git updates for workbench {} + Nelze načíst git aktualizace pro pracovní prostředí {} git status failed for {} - git status failed for {} + git status selhal pro {} Failed to read metadata from {name} - Failed to read metadata from {name} + Nepodařilo se přečíst metadata z {name} Failed to fetch code for macro '{name}' - Failed to fetch code for macro '{name}' + Nepodařilo se načíst kód pro makro '{name}' Caching macro code... - Caching macro code... + Ukládání makro kódu... Addon Manager: a worker process failed to complete while fetching {name} - Addon Manager: a worker process failed to complete while fetching {name} + Správce doplňků: při načítání {name} se nepodařilo dokončit proces pracovníka Out of {num_macros} macros, {num_failed} timed out while processing - Out of {num_macros} macros, {num_failed} timed out while processing + Z {num_macros} maker vypršel časový limit {num_failed} při zpracování Addon Manager: a worker process failed to halt ({name}) - Addon Manager: a worker process failed to halt ({name}) + Správce doplňků: proces pracovníka se nepodařilo zastavit ({name}) Getting metadata from macro {} - Getting metadata from macro {} + Získávání metadat z makra {} Timeout while fetching metadata for macro {} - Timeout while fetching metadata for macro {} + Časový limit při načítání metadat pro makro {} Failed to kill process for macro {}! - Failed to kill process for macro {}! + Nepodařilo se ukončit proces pro makro {}! Retrieving macro description... - Retrieving macro description... + Načítání popisu makro... Retrieving info from git - Retrieving info from git + Načítání informací z gitu Retrieving info from wiki - Retrieving info from wiki + Načítání informací z wiki @@ -2417,47 +2417,47 @@ installed addons will be checked for available updates Branch name Preferences header for custom repositories - Branch name + Název pobočky Basic git update failed with the following message: - Basic git update failed with the following message: + Základní aktualizace gitu se nezdařila s následující zprávou: Backing up the original directory and re-cloning - Backing up the original directory and re-cloning + Zálohování původního adresáře a opětovné klonování Failed to clone {} into {} using git - Failed to clone {} into {} using git + Nepodařilo se naklonovat {} na {} pomocí git Installing - Installing + Instalace Succeeded - Succeeded + Úspěšně Failed - Failed + Selhalo Update was cancelled - Update was cancelled + Aktualizace byla zrušena some addons may have been updated - some addons may have been updated + některé doplňky mohly být aktualizovány @@ -2465,12 +2465,12 @@ installed addons will be checked for available updates &Addon manager - &Addon manager + &Správce doplňků Manage external workbenches, macros, and preference packs - Manage external workbenches, macros, and preference packs + Správa externích pracovních kritérií, maker a balíčků preferencí @@ -2478,12 +2478,12 @@ installed addons will be checked for available updates Finished removing {} - Finished removing {} + Dokončeno odstranění {} Failed to remove some files - Failed to remove some files + Nepodařilo se odstranit některé soubory @@ -2491,7 +2491,7 @@ installed addons will be checked for available updates Finished updating the following addons - Finished updating the following addons + Aktualizace následujících doplňků dokončena diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts index 1a963efe68..007981d3d6 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts @@ -1483,12 +1483,12 @@ los complementos instalados serán revisados por actualizaciones disponibles This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Este complemento se habilitará la próxima vez que reinicie FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Este complemento se desactivará la próxima vez que reinicie FreeCAD. @@ -2228,7 +2228,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + No se pudo encontrar el archivo especificado macro {} (se esperaba en {}) @@ -2249,7 +2249,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Got an error when trying to import {} - Got an error when trying to import {} + Se ha producido un error al intentar importar {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index de4c4e614e..2eafd86d8b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -1482,12 +1482,12 @@ installed addons will be checked for available updates This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Este complemento se habilitará la próxima vez que reinicie FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Este complemento se desactivará la próxima vez que reinicie FreeCAD. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 17b08e1805..63e8542eb4 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -1485,17 +1485,17 @@ denean gehigarrien eguneraketarik dagoen begiratuko da This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Gehigarri hau FreeCAD berrabiarazten den hurrengoan gaituko da. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Gehigarri hau FreeCAD berrabiarazten den hurrengoan desgaituko da. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + QtWebEngine Python loturak ez daude instalatuta -- ordezko README bistaratzea erabiliko da. @@ -2230,7 +2230,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Ezin da makroak zehaztutako {} fitxategia aurkitu ({} kokalekuan espero zen) @@ -2251,7 +2251,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Got an error when trying to import {} - Got an error when trying to import {} + Errorea gertatu da {} inportatzen saiatzean diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index e39b148df8..f8ca9a1916 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -840,7 +840,7 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Main macro file - Fichier de la macro principal + Fichier de la macro principale @@ -1485,17 +1485,17 @@ les mises à jour disponibles seront vérifiées pour les extensions installées This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Cette extension sera activée la prochaine fois que vous redémarrerez FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Cette extension sera désactivée la prochaine fois que vous redémarrerez FreeCAD. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + Les bindings Python de QtWebEngine ne sont pas installés -- utilisation de l'affichage README de remplacement. @@ -2230,7 +2230,7 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Impossible de localiser le fichier {} spécifié par la macro (attendu à {}) @@ -2251,7 +2251,7 @@ les mises à jour disponibles seront vérifiées pour les extensions installées Got an error when trying to import {} - Got an error when trying to import {} + Une erreur s'est produite lors de l'importation de {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index 5fe0bc177b..703eba1215 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -1485,17 +1485,17 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Ez a bővítmény a FreeCAD következő újraindításakor lesz engedélyezve. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Ez a bővítmény a FreeCAD következő újraindításakor lesz kiiktatva. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + QtWebEngine Python kötések nem telepítettek -- a tartalék README megjelenítést használja. @@ -2230,7 +2230,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Nem találta a makró által megadott {} fájlt (a {}-nál kellett volna lennie) @@ -2251,7 +2251,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Got an error when trying to import {} - Got an error when trying to import {} + Hibát kapott, amikor megpróbálta importálni a {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index c7b9162567..579ec2cf83 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -22,31 +22,37 @@ CompactView + Form Bentuk + Icon Ikon + <b>Package Name</b> <b>Package Name</b> + Version Versi + Description Description + UpdateAvailable UpdateAvailable @@ -79,6 +85,7 @@ DependencyResolutionDialog + Resolve Dependencies Resolve Dependencies @@ -308,6 +315,21 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Close Dekat + + + Edit Tags + Edit Tags + + + + Comma-separated list of tags describing this item: + Comma-separated list of tags describing this item: + + + + HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. + HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. + Welcome to the Addon Manager @@ -353,21 +375,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore These and other settings are available in the FreeCAD Preferences window. These and other settings are available in the FreeCAD Preferences window. - - - Edit Tags - Edit Tags - - - - Comma-separated list of tags describing this item: - Comma-separated list of tags describing this item: - - - - HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. - HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. - EditDependencyDialog @@ -410,41 +417,49 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore ExpandedView + Form Bentuk + Icon Ikon + <h1>Package Name</h1> <h1>Package Name</h1> + Version Versi + (tags) (tags) + Description Description + Maintainer Maintainer + UpdateAvailable UpdateAvailable @@ -572,12 +587,6 @@ installed addons will be checked for available updates Download Macro metadata (approximately 10MB) Download Macro metadata (approximately 10MB) - - - - Addons - Addons - Cache update frequency @@ -618,36 +627,6 @@ installed addons will be checked for available updates Custom repositories Custom repositories - - - Show option to change branches (requires git) - Show option to change branches (requires git) - - - - Disable git (fall back to ZIP downloads only) - Disable git (fall back to ZIP downloads only) - - - - disableGit - disableGit - - - - Activate Addon Manager options intended for developers of new Addons. - Activate Addon Manager options intended for developers of new Addons. - - - - Addon developer mode - Addon developer mode - - - - developerMode - developerMode - Proxy @@ -693,6 +672,26 @@ installed addons will be checked for available updates Advanced Options Advanced Options + + + Show option to change branches (requires git) + Show option to change branches (requires git) + + + + Disable git (fall back to ZIP downloads only) + Disable git (fall back to ZIP downloads only) + + + + Activate Addon Manager options intended for developers of new Addons. + Activate Addon Manager options intended for developers of new Addons. + + + + Addon developer mode + Addon developer mode + PackageDetails @@ -1123,6 +1122,9 @@ installed addons will be checked for available updates select_toolbar_dialog + + + Select Toolbar Select Toolbar @@ -1141,6 +1143,7 @@ installed addons will be checked for available updates toolbar_button + Add button? Add button? @@ -1165,4 +1168,1330 @@ installed addons will be checked for available updates Never + + AddonsInstaller + + + Addon Manager + Addon Manager + + + + Starting up... + Starting up... + + + + Loading addon information + Loading addon information + + + + Worker process {} is taking a long time to stop... + Worker process {} is taking a long time to stop... + + + + Previous cache process was interrupted, restarting... + + Previous cache process was interrupted, restarting... + + + + + Custom repo list changed, forcing recache... + + Custom repo list changed, forcing recache... + + + + + Addon manager + Addon manager + + + + You must restart FreeCAD for changes to take effect. + You must restart FreeCAD for changes to take effect. + + + + Restart now + Restart now + + + + Restart later + Restart later + + + + + Refresh local cache + Refresh local cache + + + + Updating cache... + Updating cache... + + + + Could not find addon '{}' to select + + Could not find addon '{}' to select + + + + + + Checking for updates... + Checking for updates... + + + + Apply {} update(s) + Apply {} update(s) + + + + No updates available + No updates available + + + + + + Cannot launch a new installer until the previous one has finished. + Cannot launch a new installer until the previous one has finished. + + + + Execution of macro failed. See console for failure details. + Execution of macro failed. See console for failure details. + + + + + + + Maintainer + Maintainer + + + + + + + Author + Penulis + + + + New Python Version Detected + New Python Version Detected + + + + This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? + This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it? + + + + Processing, please wait... + Processing, please wait... + + + + + Update + Memperbarui + + + + Updating... + Updating... + + + + Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") + Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") + + + + Failed to convert the specified proxy port '{}' to a port number + Failed to convert the specified proxy port '{}' to a port number + + + + Parameter error: mutually exclusive proxy options set. Resetting to default. + Parameter error: mutually exclusive proxy options set. Resetting to default. + + + + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. + + + + Addon Manager: Unexpected {} response from server + Addon Manager: Unexpected {} response from server + + + + Error with encrypted connection + Error with encrypted connection + + + + + + Confirm remove + Confirm remove + + + + Are you sure you want to uninstall {}? + Are you sure you want to uninstall {}? + + + + + + Removing Addon + Removing Addon + + + + Removing {} + Removing {} + + + + + Uninstall complete + Uninstall complete + + + + + Uninstall failed + Uninstall failed + + + + Addon Manager Warning: Could not import QtWebEngineWidgets -- README data will display as text-only + Addon Manager Warning: Could not import QtWebEngineWidgets -- README data will display as text-only + + + + Version {version} installed on {date} + Version {version} installed on {date} + + + + Version {version} installed + Version {version} installed + + + + Installed on {date} + Installed on {date} + + + + + + + Installed + Installed + + + + On branch {}, update available to version + On branch {}, update available to version + + + + Update available to version + Update available to version + + + + An update is available + An update is available + + + + Git tag '{}' checked out, no updates possible + Git tag '{}' checked out, no updates possible + + + + This is the latest version available for branch {} + This is the latest version available for branch {} + + + + Updated, please restart FreeCAD to use + Updated, please restart FreeCAD to use + + + + Update check in progress + Update check in progress + + + + Automatic update checks disabled + Automatic update checks disabled + + + + Installation location + Installation location + + + + WARNING: This addon is obsolete + WARNING: This addon is obsolete + + + + WARNING: This addon is Python 2 Only + WARNING: This addon is Python 2 Only + + + + WARNING: This addon requires FreeCAD + WARNING: This addon requires FreeCAD + + + + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. + + + + + No URL or wiki page provided by this macro + No URL or wiki page provided by this macro + + + + Could not load README data from URL {} + Could not load README data from URL {} + + + + This Addon will be enabled next time you restart FreeCAD. + This Addon will be enabled next time you restart FreeCAD. + + + + This Addon will be disabled next time you restart FreeCAD. + This Addon will be disabled next time you restart FreeCAD. + + + + QtWebEngine Python bindings not installed -- using fallback README display. + QtWebEngine Python bindings not installed -- using fallback README display. + + + + + + Success + Success + + + + Branch change succeeded, please restart to use the new version. + Branch change succeeded, please restart to use the new version. + + + + Changed to git ref '{}' -- please restart to use Addon. + Changed to git ref '{}' -- please restart to use Addon. + + + + Page JavaScript reported + Page JavaScript reported + + + + Install + Install + + + + Uninstall + Uninstall + + + + Check for Update + Check for Update + + + + Run Macro + Run Macro + + + + Change Branch + Change Branch + + + + Enable + Memungkinkan + + + + Disable + Nonaktifkan + + + + Return to package list + Return to package list + + + + The page is taking a long time to load... showing the data we have so far... + The page is taking a long time to load... showing the data we have so far... + + + + Checking connection + Checking connection + + + + Checking for connection to GitHub... + Checking for connection to GitHub... + + + + Connection failed + Connection failed + + + + Missing dependency + Missing dependency + + + + Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + + + + Other... + For providing a license other than one listed + Other... + + + + Select the corresponding license file in your Addon + Select the corresponding license file in your Addon + + + + Location for new license file + Location for new license file + + + + Received {} response code from server + Received {} response code from server + + + + Failed to install macro {} + Failed to install macro {} + + + + Unrecognized content kind '{}' + Unrecognized content kind '{}' + + + + Unable to locate icon at {} + Unable to locate icon at {} + + + + Select an icon file for this content item + Select an icon file for this content item + + + + + + {} is not a subdirectory of {} + {} is not a subdirectory of {} + + + + Select the subdirectory for this content item + Select the subdirectory for this content item + + + + Automatic + Otomatis + + + + Workbench + Meja kerja + + + + Addon + Addon + + + + Python + Python + + + + Yes + Yes + + + + Internal Workbench + Internal Workbench + + + + External Addon + External Addon + + + + Python Package + Python Package + + + + + Other... + Other... + + + + This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + + + + Too many to list + Too many to list + + + + + + + + + Missing Requirement + Missing Requirement + + + + Addon '{}' requires '{}', which is not available in your copy of FreeCAD. + Addon '{}' requires '{}', which is not available in your copy of FreeCAD. + + + + Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: + Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: + + + + Press OK to install anyway. + Press OK to install anyway. + + + + + Incompatible Python version + Incompatible Python version + + + + This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. + This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled. + + + + Optional dependency on {} ignored because it is not in the allow-list + Optional dependency on {} ignored because it is not in the allow-list + + + + + Installing dependencies + Installing dependencies + + + + + Cannot execute Python + Cannot execute Python + + + + Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + + + + Dependencies could not be installed. Continue with installation of {} anyway? + Dependencies could not be installed. Continue with installation of {} anyway? + + + + + Cannot execute pip + Cannot execute pip + + + + Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: + Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: + + + + + Continue with installation of {} anyway? + Continue with installation of {} anyway? + + + + + Package installation failed + Package installation failed + + + + See Report View for detailed failure log. + See Report View for detailed failure log. + + + + Installing Addon + Installing Addon + + + + Installing FreeCAD Addon '{}' + Installing FreeCAD Addon '{}' + + + + Cancelling + Cancelling + + + + Cancelling installation of '{}' + Cancelling installation of '{}' + + + + {} was installed successfully + {} was installed successfully + + + + + Installation Failed + Installation Failed + + + + Failed to install {} + Failed to install {} + + + + + Create new toolbar + Create new toolbar + + + + + A macro installed with the FreeCAD Addon Manager + A macro installed with the FreeCAD Addon Manager + + + + + Run + Indicates a macro that can be 'run' + menjalankan + + + + Unable to read data from GitHub: check your internet connection and proxy settings and try again. + Unable to read data from GitHub: check your internet connection and proxy settings and try again. + + + + XML failure while reading metadata from file {} + XML failure while reading metadata from file {} + + + + Invalid metadata in file {} + Invalid metadata in file {} + + + + WARNING: Path specified in package.xml metadata does not match currently checked-out branch. + WARNING: Path specified in package.xml metadata does not match currently checked-out branch. + + + + Name + Nama + + + + Class + Kelas + + + + Description + Description + + + + Subdirectory + Subdirectory + + + + Files + Berkas + + + + Select the folder containing your Addon + Select the folder containing your Addon + + + + No Vermin, cancelling operation. + NOTE: Vermin is a Python package and proper noun - do not translate + No Vermin, cancelling operation. + + + + Scanning Addon for Python version compatibility + Scanning Addon for Python version compatibility + + + + Minimum Python Version Detected + Minimum Python Version Detected + + + + Vermin auto-detected a required version of Python 3.{} + Vermin auto-detected a required version of Python 3.{} + + + + Install Vermin? + Install Vermin? + + + + Auto-detecting the required version of Python for this Addon requires Vermin (https://pypi.org/project/vermin/). OK to install? + Auto-detecting the required version of Python for this Addon requires Vermin (https://pypi.org/project/vermin/). OK to install? + + + + Attempting to install Vermin from PyPi + Attempting to install Vermin from PyPi + + + + + Installation failed + Installation failed + + + + Failed to install Vermin -- check Report View for details. + 'Vermin' is the name of a Python package, do not translate + Failed to install Vermin -- check Report View for details. + + + + Failed to import vermin after installation -- cannot scan Addon. + 'vermin' is the name of a Python package, do not translate + Failed to import vermin after installation -- cannot scan Addon. + + + + Select an icon file for this package + Select an icon file for this package + + + + Filter is valid + Filter is valid + + + + Filter regular expression is invalid + Filter regular expression is invalid + + + + Click for details about package {} + Click for details about package {} + + + + Click for details about workbench {} + Click for details about workbench {} + + + + Click for details about macro {} + Click for details about macro {} + + + + Maintainers: + Maintainers: + + + + Tags + Tags + + + + updated + updated + + + + + Up-to-date + Up-to-date + + + + + + Update available + Update available + + + + + Pending restart + Pending restart + + + + + DISABLED + DISABLED + + + + Installed version + Installed version + + + + Unknown version + Unknown version + + + + Installed on + Installed on + + + + Available version + Available version + + + + Show Addons containing: + Show Addons containing: + + + + All + Semua + + + + Workbenches + Workbenches + + + + Macros + Makro + + + + Preference Packs + Preference Packs + + + + Status: + Status: + + + + Any + Apa saja + + + + Not installed + Not installed + + + + Filter + Menyaring + + + + OK + Baik + + + + DANGER: Developer feature + DANGER: Developer feature + + + + DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? + DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? + + + + There are local changes + There are local changes + + + + WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? + WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? + + + + + + Branch + git terminology + Branch + + + + Tag + git terminology + Tag + + + + Kind + Table header for git ref type (e.g. either Tag or Branch) + Kind + + + + Local name + Table header for git ref name + Local name + + + + Tracking + Table header for git remote tracking branch name name + Pelacakan + + + + Local updated + Table header for git update time of local branch + Local updated + + + + Remote updated + Table header for git update time of remote branch + Remote updated + + + + Installation of Python package {} failed + Installation of Python package {} failed + + + + Installation of optional package failed + Installation of optional package failed + + + + Installing required dependency {} + Installing required dependency {} + + + + Installation of Addon {} failed + Installation of Addon {} failed + + + + Downloaded package.xml for {} + Downloaded package.xml for {} + + + + Failed to decode {} file for Addon '{}' + Failed to decode {} file for Addon '{}' + + + + Any dependency information in this file will be ignored + Any dependency information in this file will be ignored + + + + Downloaded metadata.txt for {} + Downloaded metadata.txt for {} + + + + Downloaded requirements.txt for {} + Downloaded requirements.txt for {} + + + + Downloaded icon for {} + Downloaded icon for {} + + + + Unable to open macro wiki page at {} + Unable to open macro wiki page at {} + + + + Unable to fetch the code of this macro. + Unable to fetch the code of this macro. + + + + Unable to retrieve a description from the wiki for macro {} + Unable to retrieve a description from the wiki for macro {} + + + + Unable to open macro code URL {} + Unable to open macro code URL {} + + + + Unable to fetch macro-specified file {} from {} + Unable to fetch macro-specified file {} from {} + + + + Could not locate macro-specified file {} (expected at {}) + Could not locate macro-specified file {} (expected at {}) + + + + {}: Unrecognized internal workbench '{}' + {}: Unrecognized internal workbench '{}' + + + + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) + + + + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) + + + + + Got an error when trying to import {} + Got an error when trying to import {} + + + + An unknown error occurred + An unknown error occurred + + + + Could not find addon {} to remove it. + Could not find addon {} to remove it. + + + + Execution of Addon's uninstall.py script failed. Proceeding with uninstall... + Execution of Addon's uninstall.py script failed. Proceeding with uninstall... + + + + Removed extra installed file {} + Removed extra installed file {} + + + + Error while trying to remove extra installed file {} + Error while trying to remove extra installed file {} + + + + Error while trying to remove macro file {}: + Error while trying to remove macro file {}: + + + + Failed to connect to GitHub. Check your connection and proxy settings. + Failed to connect to GitHub. Check your connection and proxy settings. + + + + WARNING: Duplicate addon {} ignored + WARNING: Duplicate addon {} ignored + + + + Workbenches list was updated. + Workbenches list was updated. + + + + Git is disabled, skipping git macros + Git is disabled, skipping git macros + + + + Attempting to change non-git Macro setup to use git + + Attempting to change non-git Macro setup to use git + + + + + An error occurred updating macros from GitHub, trying clean checkout... + An error occurred updating macros from GitHub, trying clean checkout... + + + + Attempting to do a clean checkout... + Attempting to do a clean checkout... + + + + Clean checkout succeeded + Clean checkout succeeded + + + + Failed to update macros from GitHub -- try clearing the Addon Manager's cache. + Failed to update macros from GitHub -- try clearing the Addon Manager's cache. + + + + Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time + Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time + + + + Unable to fetch git updates for workbench {} + Unable to fetch git updates for workbench {} + + + + git status failed for {} + git status failed for {} + + + + Failed to read metadata from {name} + Failed to read metadata from {name} + + + + Failed to fetch code for macro '{name}' + Failed to fetch code for macro '{name}' + + + + Caching macro code... + Caching macro code... + + + + Addon Manager: a worker process failed to complete while fetching {name} + Addon Manager: a worker process failed to complete while fetching {name} + + + + Out of {num_macros} macros, {num_failed} timed out while processing + Out of {num_macros} macros, {num_failed} timed out while processing + + + + Addon Manager: a worker process failed to halt ({name}) + Addon Manager: a worker process failed to halt ({name}) + + + + Getting metadata from macro {} + Getting metadata from macro {} + + + + Timeout while fetching metadata for macro {} + Timeout while fetching metadata for macro {} + + + + Failed to kill process for macro {}! + + Failed to kill process for macro {}! + + + + + Retrieving macro description... + Retrieving macro description... + + + + Retrieving info from git + Retrieving info from git + + + + Retrieving info from wiki + Retrieving info from wiki + + + + Repository URL + Preferences header for custom repositories + Repository URL + + + + Branch name + Preferences header for custom repositories + Branch name + + + + Basic git update failed with the following message: + Basic git update failed with the following message: + + + + Backing up the original directory and re-cloning + Backing up the original directory and re-cloning + + + + Failed to clone {} into {} using git + Failed to clone {} into {} using git + + + + Installing + Installing + + + + Succeeded + Succeeded + + + + Failed + Failed + + + + Update was cancelled + Update was cancelled + + + + some addons may have been updated + some addons may have been updated + + + + Std_AddonMgr + + + &Addon manager + &Addon manager + + + + Manage external workbenches, macros, and preference packs + Manage external workbenches, macros, and preference packs + + + + AddonInstaller + + + Finished removing {} + Finished removing {} + + + + Failed to remove some files + Failed to remove some files + + + + Addons installer + + + Finished updating the following addons + Finished updating the following addons + + diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 86c2a1ad19..2531b92161 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -1381,7 +1381,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Addon Manager Warning: Could not import QtWebEngineWidgets -- README data will display as text-only - Addon Manager Warning: Could not import QtWebEngineWidgets -- README data will display as text-only + Avviso Addon Manager: impossibile importare QtWebEngineWidgets -- i dati README verranno visualizzati come solo testo diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts index 1f84762c99..e6cc032d62 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts @@ -1485,17 +1485,17 @@ installed addons will be checked for available updates This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ ჩაირთვება. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ გაითიშება. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + QtWebEngine-ის Python-ზე მიბმები დაყენებული არაა -- გამოიყენება README-ის სარეზერვო ჩვენება. @@ -2230,7 +2230,7 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + მაკროს მიერ მითითებული ფაილის {} პოვნა შეუძლებელია (ველოდი მისამართზე {}) @@ -2251,7 +2251,7 @@ installed addons will be checked for available updates Got an error when trying to import {} - Got an error when trying to import {} + შეცდომა {}-ის შემოტანის მცდელობისას diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index ff945d6152..95f305f772 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -1484,17 +1484,17 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Ten dodatek zostanie włączony przy następnym ponownym uruchomieniu programu FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Ten dodatek zostanie wyłączony przy ponownym uruchomieniu programu FreeCAD. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + Nie zainstalowano powiązań Pythona z QtWebEngine — przy użyciu awaryjnego ekranu README. @@ -2230,7 +2230,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Nie można zlokalizować określonego przez makrodefinicję pliku {} (oczekiwany w {}) @@ -2251,7 +2251,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Got an error when trying to import {} - Got an error when trying to import {} + Wystąpił błąd podczas próby zaimportowania {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index d0252d744a..418c3d0789 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -630,7 +630,7 @@ installed addons will be checked for available updates Proxy - Proxy + Opțiuni Proxy @@ -1655,7 +1655,7 @@ installed addons will be checked for available updates Addon - Addon + Addon @@ -2066,7 +2066,7 @@ installed addons will be checked for available updates Status: - Status: + Stare: diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index e6f972cb64..897077db02 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -1483,17 +1483,17 @@ installed addons will be checked for available updates This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Это дополнение будет включено при перезапуске FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Это дополнение будет отключено при перезапуске FreeCAD. QtWebEngine Python bindings not installed -- using fallback README display. - QtWebEngine Python bindings not installed -- using fallback README display. + Привязки QtWebEngine Python не установлены — используется резервный экран README. @@ -2228,7 +2228,7 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Не удалось найти макро-указанный файл {} (ожидалось в {}) @@ -2249,7 +2249,7 @@ installed addons will be checked for available updates Got an error when trying to import {} - Got an error when trying to import {} + Произошла ошибка при попытке импортировать {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index 3621016406..8fcc542212 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -2132,7 +2132,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke Local name Table header for git ref name - Local name + Krajevno ime @@ -2144,13 +2144,13 @@ preveril razpoložljivost posodobitev za nameščene dodatke Local updated Table header for git update time of local branch - Local updated + Krajevno posodobljeno Remote updated Table header for git update time of remote branch - Remote updated + Daljinsko posodobljeno diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts index 4fe38c5a97..792b4a7ec9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts @@ -1485,12 +1485,12 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Ovaj Dodatak će biti omogućen sledeći put kada ponovo pokreneš FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Ovaj Dodatak će biti onemogućen sledeći put kada ponovo pokreneš FreeCAD. @@ -2230,7 +2230,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Nije moguće locirati datoteku navedenu makro-om {} (trebala je biti u {}) @@ -2251,7 +2251,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Got an error when trying to import {} - Got an error when trying to import {} + Greška pri pokušaju uvoza {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index ebfe6fb242..5db47a7d66 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -1485,12 +1485,12 @@ installed addons will be checked for available updates This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + Овај Додатак ће бити омогућен следећи пут када поново покренеш FreeCAD. This Addon will be disabled next time you restart FreeCAD. - This Addon will be disabled next time you restart FreeCAD. + Овај Додатак ће бити онемогућен следећи пут када поново покренеш FreeCAD. @@ -2230,7 +2230,7 @@ installed addons will be checked for available updates Could not locate macro-specified file {} (expected at {}) - Could not locate macro-specified file {} (expected at {}) + Није могуће лоцирати датотеку наведену макро-ом {} (требала је бити у {}) @@ -2251,7 +2251,7 @@ installed addons will be checked for available updates Got an error when trying to import {} - Got an error when trying to import {} + Грешка при покушају увоза {} diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index 7c22d286f9..6f8702df2c 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -43,7 +43,7 @@ Version - 版本 + 發行版本 @@ -225,7 +225,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Version - 版本 + 發行版本 @@ -438,7 +438,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Version - 版本 + 發行版本 @@ -857,7 +857,7 @@ installed addons will be checked for available updates Preference Pack Name - 偏好設定包名稱 + 偏好設定套件名稱 @@ -922,7 +922,7 @@ installed addons will be checked for available updates Version - 版本 + 發行版本 diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index cd7efbc04e..b4ba4dd30f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -280,7 +280,7 @@ Deixeu en blanc per a utilitzar tots els objectes del document If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Si aquesta opció està activada, s’ompliran línies addicionals amb cada objecte que s'ha tingut en compte. Si no, només els totals. @@ -290,7 +290,7 @@ Deixeu en blanc per a utilitzar tots els objectes del document If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Si això està activat, guió i full de càlcul associat s'actualitzen quan el document es recalcula. @@ -1747,7 +1747,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Please select at least an axis object - Please select at least an axis object + Seleccioneu com a mínim un eix @@ -1758,12 +1758,12 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q First point of the beam - First point of the beam + Primer punt de la biga Base point of column - Base point of column + Punt d'origen de la columna @@ -1840,7 +1840,7 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Error: la forma base no s'ha pogut extrudir al llarg de l'objecte guia diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 546c30c88c..f578f8ba20 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -11,7 +11,7 @@ Choose a preset card - Choose a preset card + Vyberte přednastavenou kartu @@ -21,7 +21,7 @@ Copy values from an existing material in the document - Copy values from an existing material in the document + Zkopírujte hodnoty z existujícího materiálu v dokumentu @@ -36,7 +36,7 @@ The name/label of this material - The name/label of this material + Název/štítek tohoto materiálu @@ -46,7 +46,7 @@ An optional description for this material - An optional description for this material + Volitelný popis tohoto materiálu @@ -61,7 +61,7 @@ Section Color - Section Color + Barva sekce @@ -71,7 +71,7 @@ A transparency value for this material - A transparency value for this material + Hodnota průhlednosti pro tento materiál @@ -81,12 +81,12 @@ A standard (MasterFormat, Omniclass...) code for this material - A standard (MasterFormat, Omniclass...) code for this material + Standardní (Master Format, omniclass...) kód pro tento materiál Opens a browser dialog to choose a class from a BIM standard - Opens a browser dialog to choose a class from a BIM standard + Otevře dialogové okno prohlížeče pro výběr třídy ze standardu BIM @@ -96,7 +96,7 @@ A URL describing this material - A URL describing this material + URL popisující tento materiál @@ -114,7 +114,7 @@ BimServer - BimServer + BimServer @@ -124,12 +124,12 @@ The name of the BimServer you are currently connecting to. Change settings in Arch Preferences - The name of the BimServer you are currently connecting to. Change settings in Arch Preferences + Název BimServeru, ke kterému se právě připojujete. Změňte nastavení v předvolbách Arch Bim Server - Bim Server + Bim Server @@ -154,7 +154,7 @@ The list of projects present on the Bim Server - The list of projects present on the Bim Server + Seznam projektů přítomných na serveru Bim @@ -164,7 +164,7 @@ Available revisions: - Available revisions: + Dostupné revize: @@ -180,7 +180,7 @@ Root object: - Root object: + Kořenový objekt: @@ -193,17 +193,17 @@ Schedule definition - Schedule definition + Definice rozvrhu Schedule name: - Schedule name: + Název plánu: Unnamed schedule - Unnamed schedule + Nepojmenovaný plán @@ -213,7 +213,7 @@ A description for this operation - A description for this operation + Popis pro tuto operaci @@ -226,10 +226,10 @@ Can be "Count" to count the objects, or property names like "Length" or "Shape.Volume" to retrieve a certain property. - The property to retrieve from each object. -Can be "Count" to count the objects, or property names -like "Length" or "Shape.Volume" to retrieve -a certain property. + Vlastnost, která se má načíst z každého objektu. +Může být "Počet" pro počítání objektů nebo názvů vlastností +jako "Délka" nebo "Shape.Volume" k načtení +určitou vlastnost. @@ -239,7 +239,7 @@ a certain property. An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) - An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) + Nepovinná jednotka pro vyjádření výsledné hodnoty. Příklad: m^3 (můžete také napsat m³ nebo m3) @@ -252,10 +252,10 @@ a certain property. (internal names, not labels), to be considered by this operation. If the list contains groups, children will be added. Leave blank to use all objects from the document - An optional semicolon (;) separated list of object names -(internal names, not labels), to be considered by this operation. -If the list contains groups, children will be added. -Leave blank to use all objects from the document + Volitelný středníkem (;) oddělený seznam názvů objektů +(interní názvy, nikoli štítky), které je třeba vzít v úvahu při této operaci. +Pokud seznam obsahuje skupiny, budou přidány děti. +Chcete-li použít všechny objekty z dokumentu, ponechte prázdné @@ -265,32 +265,32 @@ Leave blank to use all objects from the document <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>Volitelný seznam filtrů property:value oddělený středníkem (;). Předřadit ! na název vlastnosti, chcete-li invertovat účinek filtru (vyloučit objekty, které odpovídají filtru). Budou spárovány objekty, jejichž vlastnost obsahuje hodnotu. Příklady platných filtrů (vše nerozlišuje velká a malá písmena):</p><p><span style=" font-weight:600;">Název:Zeď</span> – Budou zohledňovat pouze objekty se &quot;zeď&quot; v jejich názvu (interní název)</p><p><span style=" font-weight:600;">!Name:Wall</span> – Budou zohledňovány pouze objekty, které NEMAJÍ &quot;zeď&quot; v jejich názvu (interní název)</p><p><span style=" font-weight:600;">Popis:Win</span> – Budou zvažovány pouze objekty s &quot;win&quot; v jejich popisu</p><p><span style=" font-weight:600;">!Label:Win</span> – Budou zohledňovány pouze objekty, které NEMAJÍ &quot;výherní&quot; v jejich štítku</p><p><span style=" font-weight:600;">IfcType:Wall</span> – Budou zohledňovat pouze objekty, jejichž typ Ifc je &quot;Zeď&quot;</p><p> <span style=" font-weight:600;">!Značka:Zeď</span> – Budou zohledňovány pouze objekty, jejichž značka NENÍ &quot;Zeď&quot;</p><p>Pokud toto pole ponecháte prázdné, nebude žádné filtrování se použije</p></body></html> If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + Pokud je toto povoleno, bude spolu s tímto objektem plánu udržována přidružená tabulka obsahující výsledky Associate spreadsheet - Associate spreadsheet + Přidružit tabulku If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Je-li toto povoleno, vyplní se další řádky s každým uvažovaným objektem. Pokud ne, pouze součty. Detailed results - Detailed results + Podrobné výsledky If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Pokud je toto povoleno, plán a související tabulka se aktualizují vždy, když je dokument přepočítán. @@ -300,12 +300,12 @@ Leave blank to use all objects from the document Adds a line below the selected line/cell - Adds a line below the selected line/cell + Přidá řádek pod vybraný řádek/buňku Add row - Add row + Přidat řádek @@ -350,7 +350,7 @@ Leave blank to use all objects from the document <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> - <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> + <html><head/><body><p>Výsledky se exportují do souboru CSV nebo Markdown. </p><p><span style=" font-weight:600;">Poznámka k exportu CSV:</span></p><p>V Libreoffice můžete tento soubor CSV ponechat propojený kliknutím pravým tlačítkem lišta karet Tabulky -&gt; Nový list -&gt; Ze souboru -&gt; Odkaz (Poznámka: od LibreOffice v6.x je nyní správná cesta: List -&gt; Vložit list... -&gt; Ze souboru -&gt; Procházet...)</p></body></html> @@ -360,12 +360,12 @@ Leave blank to use all objects from the document BimServer Login - BimServer Login + BimServer Přihlášení BimServer URL: - BimServer URL: + BimServer URL: @@ -380,7 +380,7 @@ Leave blank to use all objects from the document Keep me logged in across FreeCAD sessions - Keep me logged in across FreeCAD sessions + Zůstat přihlášený ve FreeCAD relacích @@ -390,7 +390,7 @@ Leave blank to use all objects from the document IFC properties editor - IFC properties editor + IFC nastavení editoru @@ -400,27 +400,27 @@ Leave blank to use all objects from the document Leave this empty to generate one at export - Leave this empty to generate one at export + Ponechte prázdné, chcete-li jej vygenerovat při exportu List of IFC properties for this object. Double-click to edit, drag and drop to reorganize - List of IFC properties for this object. Double-click to edit, drag and drop to reorganize + Seznam vlastností IFC pro tento objekt. Poklepáním provedete úpravy, přetažením provedete reorganizaci Delete selected property/set - Delete selected property/set + Smazat vybranou vlastnost/set Force exporting geometry as BREP - Force exporting geometry as BREP + Vynutit export geometrie jako BREP Force export full FreeCAD parametric data - Force export full FreeCAD parametric data + Vynutit export úplných parametrických dat FreeCADu @@ -428,7 +428,7 @@ Leave blank to use all objects from the document Git - Git + Git @@ -438,7 +438,7 @@ Leave blank to use all objects from the document Log - Log + Záznamy @@ -448,12 +448,12 @@ Leave blank to use all objects from the document List of files to be committed: - List of files to be committed: + Seznam souborů k potvrzení: Diff - Diff + Rozdíl @@ -464,32 +464,32 @@ Leave blank to use all objects from the document Commit - Commit + Potvrdit Commit message - Commit message + Potvrdit zprávu Remote repositories - Remote repositories + Vzdálená úložiště Pull - Pull + Táhnout Push - Push + Tlačit Multimaterial definition - Multimaterial definition + Multimateriálová definice @@ -499,7 +499,7 @@ Leave blank to use all objects from the document Edit definition - Edit definition + Upravit definici @@ -509,12 +509,12 @@ Leave blank to use all objects from the document Composition: - Composition: + Složení: Total thickness - Total thickness + Celková tloušťka @@ -534,7 +534,7 @@ Leave blank to use all objects from the document Del - Del + Smazat @@ -544,17 +544,17 @@ Leave blank to use all objects from the document Nesting - Nesting + Vnoření Container - Container + Kontejner Pick selected - Pick selected + Vybrat vybrané @@ -574,7 +574,7 @@ Leave blank to use all objects from the document Nesting parameters - Nesting parameters + Parametry vnoření @@ -584,32 +584,32 @@ Leave blank to use all objects from the document Closer than this, two points are considered equal - Closer than this, two points are considered equal + Blíže k tomu jsou dva body považovány za stejné Arcs subdivisions - Arcs subdivisions + Pododdělení oblouků The number of segments to divide non-linear edges into, for calculations. If curved shapes overlap, try raising this value - The number of segments to divide non-linear edges into, for calculations. If curved shapes overlap, try raising this value + Počet segmentů, na které se mají rozdělit nelineární hrany pro výpočty. Pokud se zakřivené tvary překrývají, zkuste tuto hodnotu zvýšit Rotations - Rotations + Rotace A comma-separated list of angles to try and rotate the shapes - A comma-separated list of angles to try and rotate the shapes + Čárkami oddělený seznam úhlů pro pokus o otočení tvarů Nesting operation - Nesting operation + Operace vnoření @@ -672,52 +672,52 @@ Leave blank to use all objects from the document If this is checked, when an object becomes Subtraction or Addition of an Arch object, it will receive the Draft Construction color. - If this is checked, when an object becomes Subtraction or Addition of an Arch object, it will receive the Draft Construction color. + Pokud je toto zaškrtnuto, když se objekt stane objektem Odečítání nebo Přidání oblouku, obdrží barvu Konstrukce konstrukce. Apply Draft construction style to subcomponents - Apply Draft construction style to subcomponents + Aplikujte konstrukční styl Návrh na dílčí součásti Do not compute areas for object with more than: - Do not compute areas for object with more than: + Nepočítat oblasti pro objekt s více než: faces - faces + plochy Interval between file checks for references - Interval between file checks for references + Interval mezi kontrolami souborů na odkazy seconds - sekundy + sekundy By default, new objects will have their "Move with host" property set to False, which means they won't move when their host object is moved. - By default, new objects will have their "Move with host" property set to False, which means they won't move when their host object is moved. + Ve výchozím nastavení budou mít nové objekty vlastnost "Přesunout s hostitelem" nastavenou na hodnotu False, což znamená, že se při přesunutí hostitelského objektu nebudou pohybovat. Set "Move with host" property to True by default - Set "Move with host" property to True by default + Ve výchozím nastavení nastavte vlastnost "Přesunout s hostitelem" na hodnotu True Set "Move base" property to True by default - Set "Move base" property to True by default + Ve výchozím nastavení nastavte vlastnost "přesunout základnu" na hodnotu True If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. - If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. + Pokud je toto zaškrtnuto, když má objekt Arch materiál, objekt převezme barvu materiálu. Toto lze u každého objektu přepsat. @@ -732,7 +732,7 @@ Leave blank to use all objects from the document The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Verze IFC změní, které atributy a produkty jsou podporovány @@ -817,31 +817,31 @@ Leave blank to use all objects from the document Symbol line thickness ratio - Symbol line thickness ratio + Poměr tloušťky čáry symbolu Hidden geometry pattern - Hidden geometry pattern + Schéma skryté geometrie This is the SVG stroke-dasharray property to apply to projections of hidden objects. - This is the SVG stroke-dasharray property to apply -to projections of hidden objects. + Toto je vlastnost SVG stroke-dasharray, která se má použít +k projekcím skrytých předmětů. Pattern scale - Pattern scale + Meřítko vzoru Scaling factor for patterns used by object that have a Footprint display mode - Scaling factor for patterns used by object that have -a Footprint display mode + Faktor měřítka pro vzory používané objektem, který má +a Režim zobrazení stopy @@ -856,7 +856,7 @@ a Footprint display mode The URL of a bim server instance (www.bimserver.org) to connect to. - The URL of a bim server instance (www.bimserver.org) to connect to. + Adresa URL instance serveru bim (www.bimserver.org), ke které se chcete připojit. @@ -868,14 +868,14 @@ a Footprint display mode If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - If this is selected, the "Open BimServer in browser" -button will open the Bim Server interface in an external browser -instead of the FreeCAD web workbench + Pokud je vybráno toto, zobrazí se „Otevřít BimServer v prohlížeči“ +tlačítko otevře rozhraní Bim Server v externím prohlížeči +místo webového pracovního stolu FreeCAD Open in external browser - Open in external browser + Otevřít v externím prohlížeči @@ -885,12 +885,12 @@ instead of the FreeCAD web workbench If this is checked, the text that gets placed in the clipboard will include the unit. Otherwise, it will be a simple number expressed in internal units (millimeters) - If this is checked, the text that gets placed in the clipboard will include the unit. Otherwise, it will be a simple number expressed in internal units (millimeters) + Pokud je toto zaškrtnuto, text, který se umístí do schránky, bude obsahovat jednotku. Jinak to bude jednoduché číslo vyjádřené ve vnitřních jednotkách (milimetrech) Include unit when sending measurements to clipboard - Include unit when sending measurements to clipboard + Při odesílání měření do schránky zahrňte jednotku @@ -926,7 +926,7 @@ instead of the FreeCAD web workbench mm - mm + mm @@ -939,7 +939,7 @@ instead of the FreeCAD web workbench Use sketches - Use sketches + Použít náčrty @@ -1059,7 +1059,7 @@ instead of the FreeCAD web workbench Pipes - Pipes + Potrubí @@ -1069,7 +1069,7 @@ instead of the FreeCAD web workbench Helpers (grids, axes, etc...) - Helpers (grids, axes, etc...) + Pomocky (mřížky, osy, atd...) @@ -1251,8 +1251,8 @@ své otvory již odečteny The importer will try to detect extrusions. Note that this might slow things down. - The importer will try to detect extrusions. -Note that this might slow things down. + Dovozce se pokusí odhalit výlisky. +Pamatujte, že to může věci zpomalit. @@ -1262,12 +1262,12 @@ Note that this might slow things down. Split walls made of multiple layers - Split walls made of multiple layers + Dělené stěny z více vrstev Split multilayer walls - Split multilayer walls + Rozdělit vícevrstvé stěny @@ -1313,7 +1313,7 @@ they will be treated as one. Exclude list: - Exclude list: + Seznam vyloučení: @@ -1330,7 +1330,7 @@ To zpomalí import, ale budete moci sledovat import. Fit view while importing - Fit view while importing + Přizpůsobit zobrazení při importu @@ -1350,15 +1350,15 @@ vlastností FreeCAD objektu objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Pokud je tato možnost zaškrtnuta, výchozí 'Projekt', 'Site', 'Building' a 'Patrays' +objekty, které se obvykle nacházejí v souboru IFC, nejsou importovány a všechny objekty +jsou místo toho umístěny do „skupiny“. +„Budovy“ a „Podlaží“ se stále importují, pokud je jich více. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + Nahraďte „Projekt“, „Místo“, „Budova“ a „Podlaží“ za „Skupina“ @@ -1379,7 +1379,7 @@ are placed in a 'Group' instead. All dimensions in the file will be scaled with this factor - All dimensions in the file will be scaled with this factor + Všechny rozměry v souboru budou zmenšeny s tímto faktorem @@ -1390,8 +1390,8 @@ are placed in a 'Group' instead. Meshing program that should be used. If using Netgen, make sure that it is available. - Meshing program that should be used. -If using Netgen, make sure that it is available. + Síťovací program, který by měl být použit. +Pokud používáte Netgen, ujistěte se, že je k dispozici. @@ -1421,7 +1421,7 @@ If using Netgen, make sure that it is available. Tessellation value to use with the Builtin and the Mefisto meshing program. - Tessellation value to use with the Builtin and the Mefisto meshing program. + Hodnota teselace pro použití s programem Builtin a Mefisto. @@ -1438,9 +1438,9 @@ If using Netgen, make sure that it is available. Grading value to use for meshing using Netgen. This value describes how fast the mesh size decreases. The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - Grading value to use for meshing using Netgen. -This value describes how fast the mesh size decreases. -The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. + Hodnota třídění, která se má použít pro síťování pomocí Netgen. +Tato hodnota popisuje, jak rychle se velikost sítě zmenšuje. +Gradient velikosti lokální sítě h(x) je vázán |Δh(x)| ≤ 1/hodnota. @@ -1596,15 +1596,15 @@ To vede k menším rozdílům mezi verzemi souborů. Its serializer functionality allows to give it an OCC shape and it will produce adequate IFC geometry: NURBS, faceted, or anything else. Note: The serializer is still an experimental feature! - IFCOpenShell is a library that allows to import IFC files. -Its serializer functionality allows to give it an OCC shape and it will -produce adequate IFC geometry: NURBS, faceted, or anything else. -Note: The serializer is still an experimental feature! + IFCOpenShell je knihovna, která umožňuje import souborů IFC. +Jeho funkce serializátoru umožňuje dát mu tvar OCC a bude +vytvořit adekvátní IFC geometrii: NURBS, fazetovou nebo cokoli jiného. +Poznámka: Serializátor je stále experimentální funkce! Use IfcOpenShell serializer if available - Use IfcOpenShell serializer if available + Pokud je k dispozici, použijte serializátor IfcOpenShell @@ -1759,7 +1759,7 @@ bude pracovat při otevírání souboru. Column - Column + Sloupec @@ -1769,7 +1769,7 @@ bude pracovat při otevírání souboru. Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Nejprve vyberte základní objekt a poté okraje, které chcete použít jako cesty vysunutí @@ -1872,7 +1872,7 @@ bude pracovat při otevírání souboru. Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Chyba: Základní tvar nelze vytáhnout podél tohoto objektu nástroje @@ -1945,7 +1945,7 @@ bude pracovat při otevírání souboru. Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Vyberte objekt nebo hrany, které mají být použity jako nástroj (cesta vysunutí) @@ -2003,52 +2003,52 @@ bude pracovat při otevírání souboru. You must select a base shape object and optionally a mesh object - You must select a base shape object and optionally a mesh object + Musíte vybrat základní tvar objekt a volitelně objekt sítě Create Equipment - Create Equipment + Vytvořit vybavení You must select exactly one base object - You must select exactly one base object + Musíte vybrat přesně jeden základní objekt The selected object must be a mesh - The selected object must be a mesh + Vybraným objektem musí být síť This mesh has more than 1000 facets. - This mesh has more than 1000 facets. + Tato síť má více než 1000 fazet. This operation can take a long time. Proceed? - This operation can take a long time. Proceed? + Tato operace může trvat dlouho. Pokračovat? The mesh has more than 500 facets. This will take a couple of minutes... - The mesh has more than 500 facets. This will take a couple of minutes... + Síť má více než 500 aspektů. To bude trvat několik minut... Create 3 views - Create 3 views + Vytvořit 3 pohledy BuildingPart - BuildingPart + Část budovy Create BuildingPart - Create BuildingPart + Vytvořit BuildingPart @@ -2063,12 +2063,12 @@ bude pracovat při otevírání souboru. Set working plane - Set working plane + Nastavit pracovní rovinu Write camera position - Write camera position + Zapsat pozici kamery @@ -2079,12 +2079,12 @@ bude pracovat při otevírání souboru. Reorder children alphabetically - Reorder children alphabetically + Změnit pořadí potomků abecedně Clone level up - Clone level up + Klonovat úroveň nahoru @@ -2096,17 +2096,17 @@ bude pracovat při otevírání souboru. Create profile - Create profile + Vytvořit nový profil Profile settings - Profile settings + Nastavení profilu Create Profile - Create Profile + Vytvořit profil @@ -2122,51 +2122,51 @@ Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. Note: You can change that in the preferences. - Please either select only Building objects or nothing at all! + Vyberte prosím buď pouze stavební objekty, nebo vůbec nic! -Site is not allowed to accept any other object besides Building. +Místo nesmí přijímat žádný jiný objekt kromě budovy. -Other objects will be removed from the selection. +Ostatní objekty budou z výběru odstraněny. -Note: You can change that in the preferences. +Poznámka: Můžete to změnit v předvolbách. There is no valid object in the selection. Site creation aborted. - There is no valid object in the selection. + Ve výběru není žádný platný objekt. -Site creation aborted. +Vytvoření webu bylo přerušeno. Create Site - Create Site + Vytvořit stránku Create Roof - Create Roof + Vytvořit střechu Unable to create a roof - Unable to create a roof + Nelze vytvořit střechu Please select a base object - Please select a base object + Vyber základní objekt Roof - Roof + Střecha @@ -2181,17 +2181,17 @@ Site creation aborted. If Angle = 0 and Run = 0 then the profile is identical to the relative profile. If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. If Run = 0 then the run is calculated so that the height is the same as the relative profile. - Parameters of the roof profiles : -* Angle : slope in degrees relative to the horizontal. -* Run : horizontal distance between the wall and the ridge. -* Thickness : thickness of the roof. -* Overhang : horizontal distance between the eave and the wall. -* Height : height of the ridge above the base (calculated automatically). -* IdRel : Id of the relative profile used for automatic calculations. + Parametry střešních profilů: +* Úhel: sklon ve stupních vzhledem k horizontále. +* Run : vodorovná vzdálenost mezi stěnou a hřebenem. +* Tloušťka: tloušťka střechy. +* Přesah: vodorovná vzdálenost mezi okapem a stěnou. +* Výška : výška hřebene nad základnou (vypočítá se automaticky). +* IdRel : Id relativního profilu používaného pro automatické výpočty. --- -If Angle = 0 and Run = 0 then the profile is identical to the relative profile. -If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. -If Run = 0 then the run is calculated so that the height is the same as the relative profile. +Pokud Angle = 0 a Run = 0, pak je profil identický s relativním profilem. +Pokud je úhel = 0, pak se úhel vypočítá tak, aby výška byla stejná jako relativní profil. +Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relativní profil. @@ -2201,37 +2201,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Angle (deg) - Angle (deg) + Úhel (deg) Run (mm) - Run (mm) + Spustit (mm) IdRel - IdRel + IdRel Thickness (mm) - Thickness (mm) + Tloušťka (mm) Overhang (mm) - Overhang (mm) + Přesah (mm) Height (mm) - Height (mm) + Výška (mm) Door - Door + Dveře @@ -2241,22 +2241,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Cut Plane - Cut Plane + Řezná rovina Cut Plane options - Cut Plane options + Možnosti řezné roviny Which side to cut - Which side to cut + Na kterou stranu řezat Behind - Behind + Za @@ -2266,17 +2266,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Reload reference - Reload reference + Znovu načíst reference Open reference - Open reference + Otevřít reference Create external reference - Create external reference + Vytvořit externí reference @@ -2284,72 +2284,72 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Couldn't determine character encoding - Error: Couldn't determine character encoding + Chyba: Nelze určit kódování znaků Frame - Frame + Rám Create Frame - Create Frame + Vytvořit rám Crossing point not found in profile. - Crossing point not found in profile. + V profilu nebyl nalezen průsečík. Shapes elevation - Shapes elevation + Tvar nákresu Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Vyberte, které pole poskytuje výšku tvarů: No shape found in this file - No shape found in this file + V tomto souboru nebyl nalezen žádný tvar Shapefile module not found - Shapefile module not found + Modul Shapefile nebyl nalezen The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Knihovna shapefile python nebyla ve vašem systému nalezena. Chcete si jej nyní stáhnout z <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? Bude umístěn do složky maker. Error: Unable to download from: - Error: Unable to download from: + Chyba: Nelze stáhnout z: Could not download shapefile module. Aborting. - Could not download shapefile module. Aborting. + Nelze stáhnout modul shapefile. Přerušení. Shapefile module not downloaded. Aborting. - Shapefile module not downloaded. Aborting. + Modul Shapefile nebyl stažen. Přerušení. Shapefile module not found. Aborting. - Shapefile module not found. Aborting. + Modul Shapefile nebyl nalezen. Přerušení. The shapefile library can be downloaded from the following URL and installed in your macros folder: - The shapefile library can be downloaded from the following URL and installed in your macros folder: + Knihovnu shapefile lze stáhnout z následující adresy URL a nainstalovat do složky maker: @@ -2361,12 +2361,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Window - Create Window + Vytvořit okno Choose a face on an existing object or select a preset - Choose a face on an existing object or select a preset + Vyberte plochu na existujícím objektu nebo vyberte přednastavení @@ -2433,7 +2433,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Pick selected - Pick selected + Vybrat vybrané @@ -2544,12 +2544,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela If this is checked, the default Frame value of this window will be added to the value entered here - If this is checked, the default Frame value of this window will be added to the value entered here + Je-li zaškrtnuto, výchozí hodnota rámu tohoto okna bude přidána k hodnotě zadané zde If this is checked, the default Offset value of this window will be added to the value entered here - If this is checked, the default Offset value of this window will be added to the value entered here + Je-li zaškrtnuto, výchozí hodnota odsazení tohoto okna bude přidána k hodnotě zadané zde @@ -2628,32 +2628,32 @@ If Run = 0 then the run is calculated so that the height is the same as the rela IfcOpenShell not found or disabled, falling back on internal parser. - IfcOpenShell not found or disabled, falling back on internal parser. + IfcOpenShell nebyl nalezen nebo je zakázán, přecházím zpět na interní analyzátor. IFC Schema not found, IFC import disabled. - IFC Schema not found, IFC import disabled. + IFC schéma nenalezeno. IFC import zakázán. Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed + Chyba: IfcOpenShell není nainstalován Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old + Chyba: stará verze IfcOpenShell Create Project - Create Project + Vytvořit projekt Create Stairs - Create Stairs + Vytvořit schody @@ -2694,7 +2694,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Total thickness - Total thickness + Celková tloušťka @@ -2720,32 +2720,32 @@ If Run = 0 then the run is calculated so that the height is the same as the rela file %s successfully created. - file %s successfully created. + soubor %s byl úspěšně vytvořen. Create Grid - Create Grid + Vytvořit mřížku Auto height is larger than height - Auto height is larger than height + Automatická výška je větší než výška Total row size is larger than height - Total row size is larger than height + Celková velikost řádku je větší než výška Auto width is larger than width - Auto width is larger than width + Automatická šířka je větší než šířka Total column size is larger than width - Total column size is larger than width + Celková velikost sloupce je větší než šířka @@ -2755,17 +2755,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Total width - Total width + Celková šířka Total height - Total height + Celková výška Add row - Add row + Přidat řádek @@ -2775,42 +2775,42 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add col - Add col + Přidat sloupec Del col - Del col + Smazat sloupec Create span - Create span + Vytvořit rozpětí Remove span - Remove span + Odstranit rozpětí Rows - Rows + Řádky Columns - Columns + Sloupy Precast elements - Precast elements + Preferované prvky Slab type - Slab type + Typ desky @@ -2820,42 +2820,42 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Dent length - Dent length + Délka promáčkliny Dent width - Dent width + Šířka promáčkliny Dent height - Dent height + Výška Promáčkliny Slab base - Slab base + Desková základna Number of holes - Number of holes + Počet otvorů Major diameter of holes - Major diameter of holes + Hlavní průměr otvorů Minor diameter of holes - Minor diameter of holes + Menší průměr otvorů Spacing between holes - Spacing between holes + Mezery mezi otvory @@ -3296,7 +3296,7 @@ Floor creation aborted. Hosts - Hosts + Hostitelé @@ -3541,7 +3541,7 @@ Building creation aborted. Use sketches - Use sketches + Použít náčrty @@ -5927,7 +5927,7 @@ Building creation aborted. BuildingPart - BuildingPart + Část budovy @@ -6095,7 +6095,7 @@ Building creation aborted. Roof - Roof + Střecha @@ -6147,7 +6147,7 @@ Building creation aborted. Frame - Frame + Rám @@ -6372,7 +6372,7 @@ Building creation aborted. Panel Cut - Panel Cut + Vyjmutí dílce @@ -6385,7 +6385,7 @@ Building creation aborted. Panel Sheet - Panel Sheet + List dílce diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 3326719447..1cc88d2301 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -3069,7 +3069,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + Kalkulationstabelle entfernen @@ -5978,7 +5978,7 @@ Building creation aborted. Draft annotation tools - Draft annotation tools + Werkzeuge zur Beschriftung von Entwürfen @@ -5988,7 +5988,7 @@ Building creation aborted. Draft snap - Draft snap + Entwurfs-Einrastung diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index 1a28041246..a3a8208dd9 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -284,7 +284,7 @@ Ifc Type: Pared. Sólo considerará aquellos objetos cuyo Tipo de Ifc es Pared. If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Si esto está habilitado, se llenarán líneas adicionales con cada objeto considerado. Si no, sólo los totales. @@ -2943,7 +2943,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Panel options - Panel options + Opciones del panel @@ -3091,7 +3091,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Remove spreadsheet - Remove spreadsheet + Borrar la hoja de cálculo @@ -5126,148 +5126,148 @@ Creación de construcción cancelada. A margin inside the boundary - A margin inside the boundary + Un margen dentro de los límites Turns the display of the margin on/off - Turns the display of the margin on/off + Activa o desactiva la visualización del margen The linked Panel cuts - The linked Panel cuts + Los cortes del panel vinculado The tag text to display - The tag text to display + El texto de la etiqueta para mostrar The font file - The font file + El archivo de la tipografía The width of the sheet - The width of the sheet + El ancho de la hoja The height of the sheet - The height of the sheet + El alto de la hoja The fill ratio of this sheet - The fill ratio of this sheet + La relación de llenado de esta hoja Specifies an angle for the wood grain (Clockwise, 0 is North) - Specifies an angle for the wood grain (Clockwise, 0 is North) + Especifica un ángulo para el grano de madera (en sentido horario, 0 es del norte) Specifies the scale applied to each panel view. - Specifies the scale applied to each panel view. + Especifica la escala aplicada a cada vista del panel. A list of possible rotations for the nester - A list of possible rotations for the nester + Una lista de posibles rotaciones para el nester Turns the display of the wood grain texture on/off - Turns the display of the wood grain texture on/off + Activa o desactiva la textura del grano de madera An optional host object for this curtain wall - An optional host object for this curtain wall + Un objeto huésped opcional para este muro cortina The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + La altura del muro cortina, si se establece desde una arista The number of vertical mullions - The number of vertical mullions + El número de parteluces verticales If the profile of the vertical mullions get aligned with the surface or not - If the profile of the vertical mullions get aligned with the surface or not + Si el perfil de los parteluces verticales se alinea con la superficie o no The number of vertical sections of this curtain wall - The number of vertical sections of this curtain wall + El número de secciones verticales de este muro cortina The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + La altura del perfil de los parteluces verticales, si no se utiliza ningún perfil The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + La anchura del perfil de los parteluces verticales, si no se utiliza ningún perfil A profile for vertical mullions (disables vertical mullion size) - A profile for vertical mullions (disables vertical mullion size) + Un perfil para parteluces verticales (deshabilita el tamaño vertical de los paneles) The number of horizontal mullions - The number of horizontal mullions + El número de parteluces horizontales If the profile of the horizontal mullions gets aligned with the surface or not - If the profile of the horizontal mullions gets aligned with the surface or not + Si el perfil de los parteluces horizontales resulta alineado con la superficie o no The number of horizontal sections of this curtain wall - The number of horizontal sections of this curtain wall + El número de secciones horizontales de este muro cortina The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + La altura del perfil de los parteluces horizontales, si no se utiliza ningún perfil The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + La anchura del perfil de los parteluces horizontales, si no se utiliza ningún perfil A profile for horizontal mullions (disables horizontal mullion size) - A profile for horizontal mullions (disables horizontal mullion size) + Un perfil para parteluces horizontales (deshabilita el tamaño horizontal del panel) The number of diagonal mullions - The number of diagonal mullions + El número de parteluces diagonales The size of the diagonal mullions, if any, if no profile is used - The size of the diagonal mullions, if any, if no profile is used + El tamaño de los parteluces diagonales, si hay, en caso de que ningún perfil sea usado A profile for diagonal mullions, if any (disables horizontal mullion size) - A profile for diagonal mullions, if any (disables horizontal mullion size) + Un perfil de los parteluces diagonales, si hay (deshabilita el tamaño horizontal del parteluz) @@ -5282,62 +5282,62 @@ Creación de construcción cancelada. Swaps horizontal and vertical lines - Swaps horizontal and vertical lines + Intercambia líneas horizontales y verticales Perform subtractions between components so none overlap - Perform subtractions between components so none overlap + Realizar sustracciones entre componentes de modo que no se solapen Centers the profile over the edges or not - Centers the profile over the edges or not + Centra el perfil sobre los bordes o no The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + La referencia de la dirección vertical utilizada por este objeto deduciendo las direcciones verticales/horizontales. Úselo cerca de la dirección vertical de su muro cortina The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + El diámetro de esta tubería, si no está basado en un perfil The length of this pipe, if not based on an edge - The length of this pipe, if not based on an edge + La longitud de esta tubería, si no está basado en una arista An optional closed profile to base this pipe on - An optional closed profile to base this pipe on + Un perfil cerrado opcional en el que basar esta tubería Offset from the start point - Offset from the start point + Desplazamiento desde el punto de inicio Offset from the end point - Offset from the end point + Desplazamiento desde el punto final The wall thickness of this pipe, if not based on a profile - The wall thickness of this pipe, if not based on a profile + El grosor de la pared de esta tubería, si no está basado en un perfil The curvature radius of this connector - The curvature radius of this connector + El radio de curvatura de este conector The pipes linked by this connector - The pipes linked by this connector + Las tuberías unidas por este conector @@ -5372,7 +5372,7 @@ Creación de construcción cancelada. If True, a spreadsheet containing the results is recreated when needed - If True, a spreadsheet containing the results is recreated when needed + Si es verdadero, una hoja de cálculo que contiene los resultados es recreada cuando es necesario @@ -5387,7 +5387,7 @@ Creación de construcción cancelada. If True, additional lines with each individual object are added to the results - If True, additional lines with each individual object are added to the results + Si es verdadero, se añaden líneas adicionales con cada objeto individual a los resultados @@ -5403,7 +5403,7 @@ Creación de construcción cancelada. The angles of each axis - The angles of each axis + Los ángulos de cada eje @@ -5413,22 +5413,22 @@ Creación de construcción cancelada. An optional custom bubble number - An optional custom bubble number + Un número opcional personalizado de burbuja The length of the axes - The length of the axes + La longitud de los ejes If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Si no es cero, los ejes no están representados como una línea completa sino como dos líneas de la longitud dada The size of the axis bubbles - The size of the axis bubbles + El tamaño de las burbujas del eje @@ -5438,7 +5438,7 @@ Creación de construcción cancelada. The type of line to draw this axis - The type of line to draw this axis + El tipo de línea para dibujar este eje @@ -5846,7 +5846,7 @@ Creación de construcción cancelada. Enable this to make the wall generate blocks - Enable this to make the wall generate blocks + Permitir esto para hacer bloques de pared generados @@ -5861,12 +5861,12 @@ Creación de construcción cancelada. The horizontal offset of the first line of blocks - The horizontal offset of the first line of blocks + El desplazamiento horizontal de la primera línea de bloques The horizontal offset of the second line of blocks - The horizontal offset of the second line of blocks + El desplazamiento horizontal de la segunda línea de bloques @@ -5903,7 +5903,7 @@ Creación de construcción cancelada. Creates an equipment object from a selected object (Part or Mesh) - Creates an equipment object from a selected object (Part or Mesh) + Crea un objeto de equipamiento desde un objeto seleccionado (Parte o Malla) @@ -5916,7 +5916,7 @@ Creación de construcción cancelada. Creates 3 views (top, front, side) from a mesh-based object - Creates 3 views (top, front, side) from a mesh-based object + Crea 3 vistas (planta, alzado, perfil) de un objeto basado en una malla diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index 6a0011d038..7ab6934a01 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -284,7 +284,7 @@ Ifc Type: Pared. Sólo considerará aquellos objetos cuyo Tipo de Ifc es Pared. If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Si esto está habilitado, se llenarán líneas adicionales con cada objeto considerado. Si no, sólo los totales. @@ -2943,7 +2943,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Panel options - Panel options + Opciones del panel @@ -3091,7 +3091,7 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Remove spreadsheet - Remove spreadsheet + Borrar la hoja de cálculo @@ -5126,148 +5126,148 @@ Creación de construcción cancelada. A margin inside the boundary - A margin inside the boundary + Un margen dentro de los límites Turns the display of the margin on/off - Turns the display of the margin on/off + Activa o desactiva la visualización del margen The linked Panel cuts - The linked Panel cuts + Los cortes del panel vinculado The tag text to display - The tag text to display + El texto de la etiqueta para mostrar The font file - The font file + El archivo de la tipografía The width of the sheet - The width of the sheet + El ancho de la hoja The height of the sheet - The height of the sheet + El alto de la hoja The fill ratio of this sheet - The fill ratio of this sheet + La relación de llenado de esta hoja Specifies an angle for the wood grain (Clockwise, 0 is North) - Specifies an angle for the wood grain (Clockwise, 0 is North) + Especifica un ángulo para el grano de madera (en sentido horario, 0 es del norte) Specifies the scale applied to each panel view. - Specifies the scale applied to each panel view. + Especifica la escala aplicada a cada vista del panel. A list of possible rotations for the nester - A list of possible rotations for the nester + Una lista de posibles rotaciones para el nester Turns the display of the wood grain texture on/off - Turns the display of the wood grain texture on/off + Activa o desactiva la textura del grano de madera An optional host object for this curtain wall - An optional host object for this curtain wall + Un objeto huésped opcional para este muro cortina The height of the curtain wall, if based on an edge - The height of the curtain wall, if based on an edge + La altura del muro cortina, si se establece desde una arista The number of vertical mullions - The number of vertical mullions + El número de parteluces verticales If the profile of the vertical mullions get aligned with the surface or not - If the profile of the vertical mullions get aligned with the surface or not + Si el perfil de los parteluces verticales se alinea con la superficie o no The number of vertical sections of this curtain wall - The number of vertical sections of this curtain wall + El número de secciones verticales de este muro cortina The height of the vertical mullions profile, if no profile is used - The height of the vertical mullions profile, if no profile is used + La altura del perfil de los parteluces verticales, si no se utiliza ningún perfil The width of the vertical mullions profile, if no profile is used - The width of the vertical mullions profile, if no profile is used + La anchura del perfil de los parteluces verticales, si no se utiliza ningún perfil A profile for vertical mullions (disables vertical mullion size) - A profile for vertical mullions (disables vertical mullion size) + Un perfil para parteluces verticales (deshabilita el tamaño vertical de los paneles) The number of horizontal mullions - The number of horizontal mullions + El número de parteluces horizontales If the profile of the horizontal mullions gets aligned with the surface or not - If the profile of the horizontal mullions gets aligned with the surface or not + Si el perfil de los parteluces horizontales resulta alineado con la superficie o no The number of horizontal sections of this curtain wall - The number of horizontal sections of this curtain wall + El número de secciones horizontales de este muro cortina The height of the horizontal mullions profile, if no profile is used - The height of the horizontal mullions profile, if no profile is used + La altura del perfil de los parteluces horizontales, si no se utiliza ningún perfil The width of the horizontal mullions profile, if no profile is used - The width of the horizontal mullions profile, if no profile is used + La anchura del perfil de los parteluces horizontales, si no se utiliza ningún perfil A profile for horizontal mullions (disables horizontal mullion size) - A profile for horizontal mullions (disables horizontal mullion size) + Un perfil para parteluces horizontales (deshabilita el tamaño horizontal del panel) The number of diagonal mullions - The number of diagonal mullions + El número de parteluces diagonales The size of the diagonal mullions, if any, if no profile is used - The size of the diagonal mullions, if any, if no profile is used + El tamaño de los parteluces diagonales, si hay, en caso de que ningún perfil sea usado A profile for diagonal mullions, if any (disables horizontal mullion size) - A profile for diagonal mullions, if any (disables horizontal mullion size) + Un perfil de los parteluces diagonales, si hay (deshabilita el tamaño horizontal del parteluz) @@ -5282,62 +5282,62 @@ Creación de construcción cancelada. Swaps horizontal and vertical lines - Swaps horizontal and vertical lines + Intercambia líneas horizontales y verticales Perform subtractions between components so none overlap - Perform subtractions between components so none overlap + Realizar sustracciones entre componentes de modo que no se solapen Centers the profile over the edges or not - Centers the profile over the edges or not + Centra el perfil sobre los bordes o no The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + La referencia de la dirección vertical utilizada por este objeto deduciendo las direcciones verticales/horizontales. Úselo cerca de la dirección vertical de su muro cortina The diameter of this pipe, if not based on a profile - The diameter of this pipe, if not based on a profile + El diámetro de esta tubería, si no está basado en un perfil The length of this pipe, if not based on an edge - The length of this pipe, if not based on an edge + La longitud de esta tubería, si no está basado en una arista An optional closed profile to base this pipe on - An optional closed profile to base this pipe on + Un perfil cerrado opcional en el que basar esta tubería Offset from the start point - Offset from the start point + Desplazamiento desde el punto de inicio Offset from the end point - Offset from the end point + Desplazamiento desde el punto final The wall thickness of this pipe, if not based on a profile - The wall thickness of this pipe, if not based on a profile + El grosor de la pared de esta tubería, si no está basado en un perfil The curvature radius of this connector - The curvature radius of this connector + El radio de curvatura de este conector The pipes linked by this connector - The pipes linked by this connector + Las tuberías unidas por este conector @@ -5372,7 +5372,7 @@ Creación de construcción cancelada. If True, a spreadsheet containing the results is recreated when needed - If True, a spreadsheet containing the results is recreated when needed + Si es verdadero, una hoja de cálculo que contiene los resultados es recreada cuando es necesario @@ -5387,7 +5387,7 @@ Creación de construcción cancelada. If True, additional lines with each individual object are added to the results - If True, additional lines with each individual object are added to the results + Si es verdadero, se añaden líneas adicionales con cada objeto individual a los resultados @@ -5403,7 +5403,7 @@ Creación de construcción cancelada. The angles of each axis - The angles of each axis + Los ángulos de cada eje @@ -5413,22 +5413,22 @@ Creación de construcción cancelada. An optional custom bubble number - An optional custom bubble number + Un número opcional personalizado de burbuja The length of the axes - The length of the axes + La longitud de los ejes If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Si no es cero, los ejes no están representados como una línea completa sino como dos líneas de la longitud dada The size of the axis bubbles - The size of the axis bubbles + El tamaño de las burbujas del eje @@ -5438,7 +5438,7 @@ Creación de construcción cancelada. The type of line to draw this axis - The type of line to draw this axis + El tipo de línea para dibujar este eje @@ -5846,7 +5846,7 @@ Creación de construcción cancelada. Enable this to make the wall generate blocks - Enable this to make the wall generate blocks + Permitir esto para hacer bloques de pared generados @@ -5861,12 +5861,12 @@ Creación de construcción cancelada. The horizontal offset of the first line of blocks - The horizontal offset of the first line of blocks + El desplazamiento horizontal de la primera línea de bloques The horizontal offset of the second line of blocks - The horizontal offset of the second line of blocks + El desplazamiento horizontal de la segunda línea de bloques @@ -5903,7 +5903,7 @@ Creación de construcción cancelada. Creates an equipment object from a selected object (Part or Mesh) - Creates an equipment object from a selected object (Part or Mesh) + Crea un objeto de equipamiento desde un objeto seleccionado (Parte o Malla) @@ -5916,7 +5916,7 @@ Creación de construcción cancelada. Creates 3 views (top, front, side) from a mesh-based object - Creates 3 views (top, front, side) from a mesh-based object + Crea 3 vistas (planta, alzado, perfil) de un objeto basado en una malla diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index fd206e407e..20cfc14cb1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -280,7 +280,7 @@ Utzi hutsik dokumentuko objektu guztiak erabili daitezen. If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Hau aktibatuta badago, lerro gehigarriak kontuan hartutako objektu bakoitzeko beteko dira. Ez badago, totalak soilik. @@ -290,7 +290,7 @@ Utzi hutsik dokumentuko objektu guztiak erabili daitezen. If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Hau gaituta badago, dokumentua birkalkulatzen den bakoitzean programazioa eta hari lotutako kalkulu-orria eguneratu egingo dira. @@ -2945,7 +2945,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Panel options - Panel options + Panel-aukerak @@ -3083,7 +3083,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare added property 'Schedule' - added property 'Schedule' + 'Schedule' propietatea gehitu da @@ -3093,7 +3093,7 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Remove spreadsheet - Remove spreadsheet + Ezabatu kalkulu-orria @@ -5384,7 +5384,7 @@ Eraikinaren sorrera utzi egin da. The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Kalkulu-orri hau erabiltzen duen arkitektura-programazioa diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 4f5bbb15ed..851f660845 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -278,7 +278,7 @@ Leave blank to use all objects from the document If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Si cette option est activée, des lignes supplémentaires seront remplies pour chaque objet considéré. Dans le cas contraire, seuls les totaux seront affichés. @@ -288,7 +288,7 @@ Leave blank to use all objects from the document If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Si cette option est activée, la nomenclature et la feuille de calcul associée sont mis à jour chaque fois que le document est recalculé. @@ -333,7 +333,7 @@ Leave blank to use all objects from the document Add selection - Ajoutez la sélection + Ajouter la sélection @@ -869,7 +869,7 @@ instead of the FreeCAD web workbench Open in external browser - Ouvrir dans un navigateur externe + Si sélectionné, le bouton "Ouvrir le serveur BIM dans un navigateur" ouvrira l'interface du serveur BIM dans un navigateur externe au lieu de l'atelier Web de FreeCAD @@ -2915,7 +2915,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Panel options - Panel options + Options du panneau @@ -3048,12 +3048,12 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + suppression de la propriété "Result" et ajout de la propriété "AutoUpdate" added property 'Schedule' - added property 'Schedule' + ajout de la propriété "Schedule" @@ -3063,7 +3063,7 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Remove spreadsheet - Remove spreadsheet + Supprimer la feuille de calcul @@ -5349,12 +5349,12 @@ La création du bâtiment est abandonnée. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + Si mis à vrai, la nomenclature et la feuille de calcul associée sont mis à jour chaque fois que le document est recalculé The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + La nomenclature Arch qui utilise cette feuille de calcul diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 0661c5cff3..dfaf1eadf0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -280,7 +280,7 @@ Hagyja üresen a dokumentum összes objektumának használatát If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Ha ez bekapcsolt, a program további sorokat tölt ki minden egyes figyelembe vett tárggyal. Ha nem, csak az összegek szerepelnek. @@ -290,7 +290,7 @@ Hagyja üresen a dokumentum összes objektumának használatát If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Ha engedélyezett, a dokumentum újraszámításakor az ütemterv és a kapcsolódó táblázatkezelő frissül. @@ -2947,7 +2947,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Panel options - Panel options + Panel beállítások @@ -3080,12 +3080,12 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + az 'Eredmény' tulajdonságot eltávolítottuk, és hozzáadtuk az 'Automatikus frissítés' tulajdonságot added property 'Schedule' - added property 'Schedule' + hozzáadva az 'Ütemterv' tulajdonság @@ -3095,7 +3095,7 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Remove spreadsheet - Remove spreadsheet + Számolótábla eltávolítása @@ -5381,12 +5381,12 @@ Building creation aborted. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + Ha engedélyezett, a dokumentum újraszámításakor az ütemterv és a kapcsolódó táblázatkezelő frissül The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Az Építész ütemterv, amely ezt a táblázatot használja diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index a79eb5bd21..7b774bd786 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -262,22 +262,22 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>Sebuah tanda titik koma (;) opsional memisahkan daftar properti:saringan nilai. Tambahkan ! ke properti nama untuk membalikkan efek dari filter (kecuali objek yang sesuai dengan filter). Objek dengan properti yang mengandung nilai akan dicocokkan. Contoh-contoh saringan yang valid (semua case-sensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Hanya akan mempertimbangkan objek dengan nama &quot;wall&quot; (nama internal)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Hanya akan mempertimbangkan objek yang TIDAK memiliki &quot;wall&quot; dalam nama mereka (nama internal)</p><p><span style=" font-weight:600;">Description:Win</span> - Hanya akan mempertimbangan objek yang memiliki &quot;win&quot; dalam deskripsi mereka</p><p><span style=" font-weight:600;">!Label:Win</span> - Hanya akan mempertimbangkan objek yang TIDAK memiliki &quot;win&quot; dalam label mereka</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Hanya akan mempertimbangkan objek yang memiliki Ifc Type &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Hanya akan mempertimbangkan objek yang TIDAK memiliki tag &quot;Wall&quot;</p><p>Jika Anda membiarkan bidang kosong, maka tidak ada filter yang diaplikasikan</p></body></html> If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + Jika diaktifkan, lembar kerja yang dikaitkan yang berisi hasil akan dikelola bersama dengan obyek terjadwal ini Associate spreadsheet - Associate spreadsheet + Mengkaitkan lembar kerja - If this is turned on, additional lines will be filled with each object considered. If not, only the totals. - If this is turned on, additional lines will be filled with each object considered. If not, only the totals. + If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Jika ini diaktifkan, tambahan baris akan diisi pada setiap objek yang dipertimbangkan. Jika tidak, hanya totalnya. @@ -285,62 +285,72 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen Rincian Hasil - + + If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Jika ini diaktifkan, jadwal dan lembatang sembar yang terhubung akan diperbaharui kapanpun dokumen dihitung ulang. + + + + Auto update + Auto update + + + Adds a line below the selected line/cell Tambahkan garis di bawah garis / sel yang dipilih - + Add row Menambahkan baris - + Deletes the selected line Menghapus baris yang dipilih - + Del row Del baris - + Clears the whole list Menghapus seluruh daftar - + Clear Bersih - + Put selected objects into the "Objects" column of the selected row Masukkan objek yang dipilih ke kolom "Objek" pada baris yang dipilih - + Add selection Tambahkan Pilihan - + Imports the contents of a CSV file Impor isi file CSV - + Import Impor - + <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> - <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> + <html><head/><body><p>Ini akan mengekspor hasilnya ke fail CSV atau Markdown.</p><p><span style=" font-weight:600;">Catatan untuk ekspor CSV:</span></p><p>Di Libreoffice, Anda dapat tetap menghubungkan fail CSV tersebut dengan klik kanan pada bilah tab Sheets -&gt; New sheet -&gt;From file -&gt;Link (Catatan: untuk LibreOffice v6.x, jalur yang tepat sekarang adalah: Sheet -&gt;Insert Sheet... -&gt;From file -&gt;Browse...)</p></body></html> - + Export Export @@ -352,7 +362,7 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen BimServer URL: - BimServer URL: + Pranala BimServer: @@ -367,7 +377,7 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen Keep me logged in across FreeCAD sessions - Keep me logged in across FreeCAD sessions + Biarkan saya tetap masuk di seluruh sesi FreeCAD @@ -377,7 +387,7 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen IFC properties editor - IFC properties editor + Pengolah properti IFC @@ -402,12 +412,12 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen Force exporting geometry as BREP - Force exporting geometry as BREP + Paksa mengekspor geometri sebagai BREP Force export full FreeCAD parametric data - Force export full FreeCAD parametric data + Paksa mengekspor seluruh data parametrik FreeCAD @@ -501,7 +511,7 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen Total thickness - Total thickness + Jumlah ketebalan @@ -669,67 +679,67 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen Do not compute areas for object with more than: - Do not compute areas for object with more than: + Jangan hitung area objek jika lebih dari: faces - faces + sisi Interval between file checks for references - Interval between file checks for references + Interval pemeriksaan antar file untuk referensi seconds - seconds + detik By default, new objects will have their "Move with host" property set to False, which means they won't move when their host object is moved. - By default, new objects will have their "Move with host" property set to False, which means they won't move when their host object is moved. + Normalnya, properti "Pindahkan dengan host" pada objek baru akan disetel ke False, yang berarti objek tersebut tidak akan bergerak saat objek host dipindahkan. Set "Move with host" property to True by default - Set "Move with host" property to True by default + Setel default properti "Pindahkan dengan host" ke True Set "Move base" property to True by default - Set "Move base" property to True by default + Setel default properti "Pindahkan basis" ke True If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. - If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. + Jika ini dicentang, ketika objek Arch memiliki material, objek tersebut akan mengambil warna dari material tersebut. Ini dapat diganti untuk setiap objek. Use material color as shape color - Use material color as shape color + Gunakan warna material sebagai warna bentuk IFC version - IFC version + versi IFC The IFC version will change which attributes and products are supported - The IFC version will change which attributes and products are supported + Versi IFC akan mengubah atribut dan produk yang didukung IFC4 - IFC4 + IFC4 IFC2X3 - IFC2X3 + IFC2X3 @@ -815,8 +825,8 @@ Biarkan kosong untuk menggunakan semua objek dari dokumen This is the SVG stroke-dasharray property to apply to projections of hidden objects. - This is the SVG stroke-dasharray property to apply -to projections of hidden objects. + Ini adalah properti stroke-dasharray SVG untuk diterapkan +untuk proyeksi objek tersembunyi. @@ -827,8 +837,7 @@ to projections of hidden objects. Scaling factor for patterns used by object that have a Footprint display mode - Scaling factor for patterns used by object that have -a Footprint display mode + Faktor skala untuk pola yang digunakan objek yang memiliki mode tampilan Jejak @@ -843,7 +852,7 @@ a Footprint display mode The URL of a bim server instance (www.bimserver.org) to connect to. - The URL of a bim server instance (www.bimserver.org) to connect to. + URL permintaan server bim (www.bimserver.org) untuk dihubungkan. @@ -855,9 +864,7 @@ a Footprint display mode If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - If this is selected, the "Open BimServer in browser" -button will open the Bim Server interface in an external browser -instead of the FreeCAD web workbench + Jika dicentang, tombol "buka BimServer in peramban" akan membuka antarmuka Bim Server di peramban eksternal, bukan di meja kerja web FreeCAD @@ -926,7 +933,7 @@ instead of the FreeCAD web workbench Use sketches - Use sketches + Gunakan sketsa @@ -1056,17 +1063,17 @@ instead of the FreeCAD web workbench Helpers (grids, axes, etc...) - Helpers (grids, axes, etc...) + Bantuan (kisi-kisi, sumbu, dll...) Spaces - Spaces + Ruang Line style: - Line style: + Model garis: @@ -1076,17 +1083,17 @@ instead of the FreeCAD web workbench Dashed - Dashed + Strip Dotted - Dotted + Titik-titik Dashdot - Dashdot + Strip titik @@ -1096,19 +1103,19 @@ instead of the FreeCAD web workbench IFC import - IFC import + impor IFC Show this dialog when importing - Show this dialog when importing + Tapilkan dialog ini ketika mengimpor Shows verbose debug messages during import and export of IFC files in the Report view panel - Shows verbose debug messages during import and export -of IFC files in the Report view panel + Menampilkan pesan debug selama impor dan ekspor +file IFC pada panel Tampilan laporan @@ -1119,8 +1126,8 @@ of IFC files in the Report view panel Clones are used when objects have shared geometry One object is the base object, the others are clones. - Clones are used when objects have shared geometry -One object is the base object, the others are clones. + Kloning digunakan ketika objek berbagi geometri +Satu objek sebagai objek dasar, yang lainnya sebagai kloning. @@ -1138,19 +1145,19 @@ for example, 3 if you have a 4-core CPU. Set it to 1 to use multicore mode in single-core mode; this is safer if you start getting crashes when you set multiple cores. - EXPERIMENTAL -The number of cores to use in multicore mode. -Keep 0 to disable multicore mode. -The maximum value should be your number of cores minus 1, -for example, 3 if you have a 4-core CPU. + PERCOBAAN +Jumlah inti yang akan digunakan dalam mode multicore. +Isi 0 untuk menonaktifkan mode multicore. +Nilai maksimumnya adalah jumlah inti Anda dikurangi 1, +misalnya, isi 3 jika Anda memiliki CPU 4 inti. -Set it to 1 to use multicore mode in single-core mode; this is safer -if you start getting crashes when you set multiple cores. +Setel ke 1 untuk menggunakan mode multicore dalam mode single-core; ini lebih aman +jika Anda mulai mengalami crash saat Anda menyetel banyak inti. Number of cores to use (experimental) - Number of cores to use (experimental) + Jumlah inti (cores) yang akan digunakan (percobaan) @@ -1219,15 +1226,15 @@ if you start getting crashes when you set multiple cores. Only subtypes of the specified element will be imported. Keep the element IfcProduct to import all building elements. - Only subtypes of the specified element will be imported. -Keep the element IfcProduct to import all building elements. + Hanya subtipe dari elemen yang dispesifikkan yang akan diimpor. +Jaga elemen IfcProduct untuk mengipor seluruh elemen pembangun. Openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - Openings will be imported as subtractions, otherwise wall shapes -will already have their openings subtracted + Pembukaan akan diimpor sebagai pengurangan, jika tidak, sebagai bentuk dinding +pembukaan mereka akan sudah dikurangi @@ -1238,8 +1245,8 @@ will already have their openings subtracted The importer will try to detect extrusions. Note that this might slow things down. - The importer will try to detect extrusions. -Note that this might slow things down. + Pengimpor akan mencoba untuk mendeteksi ekstruksi. +Catatan bahwa ini akan memperlambat pekerjaan. @@ -1259,7 +1266,7 @@ Note that this might slow things down. Object names will be prefixed with the IFC ID number - Object names will be prefixed with the IFC ID number + Nama objek akan diawali dengan nomor ID IFC @@ -1270,50 +1277,49 @@ Note that this might slow things down. If several materials with the same name and color are found in the IFC file, they will be treated as one. - If several materials with the same name and color are found in the IFC file, -they will be treated as one. + Jika beberapa material dengan nama dan warna yang sama ditemukan dalam fail IFC, mereka akan diperlakukan sebagai satu. Merge materials with same name and same color - Merge materials with same name and same color + Gabungkan material dengan nama dan warna yang sama Each object will have their IFC properties stored in a spreadsheet object - Each object will have their IFC properties stored in a spreadsheet object + Setiap objek akan memiliki properti IFC mereka yang disimpan dalam objek lembar sebar Import IFC properties in spreadsheet - Import IFC properties in spreadsheet + Impor properti IFC dari lebar sebar IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. - IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. + Fail IFC dapat mengandung geometri yang tidak bersih dan solid. Jika opsi ini dicek, seluruh geomeri akan diimpor, tidak peruli validasi mereka. Allow invalid shapes - Allow invalid shapes + Izinkan bentuk yang tidak valid Exclude list: - Exclude list: + Daftar pengecualian: Comma-separated list of IFC entities to be excluded from imports - Comma-separated list of IFC entities to be excluded from imports + Daftar yang dipisahkan koma dari entitas IFC akan dikecualikan dari impor Fit view during import on the imported objects. This will slow down the import, but one can watch the import. - Fit view during import on the imported objects. -This will slow down the import, but one can watch the import. + Sesuaikan pandangan saat mengimpor objek yang diimpor. +Ini akan memperlambat proses impor, tapi Anda dapat melihat prosesnya. @@ -1324,13 +1330,12 @@ This will slow down the import, but one can watch the import. Creates a full parametric model on import using stored FreeCAD object properties - Creates a full parametric model on import using stored -FreeCAD object properties + Buat model parametrik penuh saat mengimpor menggunakan properti objek FreeCAD yang disimpan Import full FreeCAD parametric definitions if available - Import full FreeCAD parametric definitions if available + Impor definisi parametrik penuh FreeCAD jika tersedia @@ -1338,15 +1343,13 @@ FreeCAD object properties objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Jika opsi ini dicek, objek 'Project', 'Site', 'Building', dan 'Storeys' bawaan yang biasanya ditemukan di fail IFC tidak akan diimpor, dan seluruh objek akan diletakkan pada objek 'Group'. +'Buildings' dan 'Storeys' akan tetap diimpor jika terdapat lebih dari satu. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + Ganti 'Project', 'Site', 'Building', dan 'Storey' dengan 'Group' @@ -1354,8 +1357,8 @@ are placed in a 'Group' instead. DAE - + Export options Pilihan ekspor @@ -1367,7 +1370,7 @@ are placed in a 'Group' instead. All dimensions in the file will be scaled with this factor - All dimensions in the file will be scaled with this factor + Seluruh dimensi dalam fail akan diskalakan dengan faktor ini @@ -1378,8 +1381,8 @@ are placed in a 'Group' instead. Meshing program that should be used. If using Netgen, make sure that it is available. - Meshing program that should be used. -If using Netgen, make sure that it is available. + Program penjaringan yang perlu digunakan. +Jika menggunakan Netgen, pastikan itu tersedia. @@ -1409,7 +1412,7 @@ If using Netgen, make sure that it is available. Tessellation value to use with the Builtin and the Mefisto meshing program. - Tessellation value to use with the Builtin and the Mefisto meshing program. + Nilai pengubinan untuk digunakan dengan program penjaring Builtin dan Mefisto. @@ -1426,9 +1429,9 @@ If using Netgen, make sure that it is available. Grading value to use for meshing using Netgen. This value describes how fast the mesh size decreases. The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - Grading value to use for meshing using Netgen. -This value describes how fast the mesh size decreases. -The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. + Nilai Grading yang digunakan untuk penjaringan menggunakan Netgen. +Nilai ini mendeskripsikan seberapa cepat ukuran jaring berkurang. +Gradasi dari jaring lokal h(x) terikat pada |Δh(x)| ≤ 1/nilai. @@ -1438,7 +1441,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Maximum number of segments per edge - Maximum number of segments per edge + Jumlah maksimum dari segmen per tepian @@ -1448,12 +1451,12 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Number of segments per radius - Number of segments per radius + Jumlah segmen per radius Allow a second order mesh - Allow a second order mesh + Izinkan jaring tingkat kedua @@ -1473,7 +1476,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Allow quadrilateral faces - Allow quadrilateral faces + Izinkan permukaan sisi empat @@ -1483,7 +1486,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. IFC export - IFC export + Expor IFC @@ -1494,7 +1497,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Show this dialog when exporting - Show this dialog when exporting + Tampilkan dialog ini ketika mengekspor @@ -1503,37 +1506,37 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - The type of objects that you wish to export: -- Standard model: solid objects. -- Structural analysis: wireframe model for structural calculations. -- Standard + structural: both types of models. + Jenis objek yang Anda ingin expor: +- Model standar: objek solid. +- Analisis struktural: model gambar rangka untuk perhitungan struktural. +- Standar + struktural: kedua tipe model. Export type - Export type + Jenis ekspor Standard model - Standard model + Model standar Structural analysis - Structural analysis + Analisis struktural Standard + structural - Standard + structural + Standard + struktural Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. -Use this to force all objects to be exported as BREP geometry. + Beberapa pelihat IFC tidak menyukai objek yang diekspor sebagai ekstrusi. +Gunakan ini untuk memaksa seluruh objek diekspor sebagai geometri BREP. @@ -1555,9 +1558,9 @@ Use this to force all objects to be exported as BREP geometry. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, an additional calculation is done to join coplanar facets. - Curved shapes that cannot be represented as curves in IFC -are decomposed into flat facets. -If this is checked, an additional calculation is done to join coplanar facets. + Bentuk melengkung tidak dapat direpresentasikan sebagai lengkungan pada IFC +akan diuraikan menjadi permukaan datar. +Jika ini dicek, tambahan perhitungan akan dilakukan untuk menggabungkan permukaan sebidang. @@ -1569,14 +1572,14 @@ If this is checked, an additional calculation is done to join coplanar facets.When exporting objects without unique ID (UID), the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported. This leads to smaller differences between file versions. - When exporting objects without unique ID (UID), the generated UID -will be stored inside the FreeCAD object for reuse next time that object -is exported. This leads to smaller differences between file versions. + Saat mengekspor objek tanpa ID unik (UID), UID yang dihasilkan +akan disimpan dalam objek FreeCAD untuk digunakan kembali selanjutnya +saat objek tersbeut dieksor. Ini akan mengurangi perbedaan antara versi fail. Store IFC unique ID in FreeCAD objects - Store IFC unique ID in FreeCAD objects + Simpan ID unik IFC dalam objek FreeCAD @@ -1584,10 +1587,10 @@ is exported. This leads to smaller differences between file versions. - IFCOpenShell is a library that allows to import IFC files. -Its serializer functionality allows to give it an OCC shape and it will -produce adequate IFC geometry: NURBS, faceted, or anything else. -Note: The serializer is still an experimental feature! + IFCOpenShell adalah pustaka yang mengizinkan untuk mengimpor fail IFC. +Fungsional penyambungnya memperbolehkannya memberikan fail sebuah bentuk OCC dan akan +memproduksi geometri IFC yang memadai: NURBS, faceted, atau yang lainnya. +Catatan: Fungsi penyambung adalah fitur yang masih dalam tahap eksperimental! @@ -1597,7 +1600,7 @@ Note: The serializer is still an experimental feature! 2D objects will be exported as IfcAnnotation - 2D objects will be exported as IfcAnnotation + Objek 2D akan diexpor sebagai IfcAnnotation @@ -1608,8 +1611,8 @@ Note: The serializer is still an experimental feature! All FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - All FreeCAD object properties will be stored inside the exported objects, -allowing to recreate a full parametric model on reimport. + Seluruh properti objek FreeCAD akan disimpan dalam objek yang diekspor, +memperbolehkannya untuk membuat ulang model parametrik penuh yang diimpor ulang. @@ -1620,13 +1623,13 @@ allowing to recreate a full parametric model on reimport. When possible, similar entities will be used only once in the file if possible. This can reduce the file size a lot, but will make it less easily readable. - When possible, similar entities will be used only once in the file if possible. -This can reduce the file size a lot, but will make it less easily readable. + Saat memungkinkan, entitas yang mirip akan digunakan sekali dalam fail jika memungkinkan. +Ini akan sangat mengurangi ukuran fail, tapi akan membuatnya kurang mudah dibaca. Reuse similar entities - Reuse similar entities + Menggunakan ulang entitas yang mirip @@ -1634,15 +1637,16 @@ This can reduce the file size a lot, but will make it less easily readable. - When possible, IFC objects that are extruded rectangles will be -exported as IfcRectangleProfileDef. -However, some other applications might have problems importing that entity. -If this is your case, you can disable this and then all profiles will be exported as IfcArbitraryClosedProfileDef. + Saat memungkinkan, objek IFC yang adalah persegi panjang terekstrusi akan +diekspor sebagai IfcRectangleProfileDef. +Namun, beberapa aplikasi mungkin akan memiliki masalah mengimpor entitas tersebut. +Jika itu kasus Anda, Anda dapat menonaktifkan ini dan seluruh profil akan diekspor sebagai +IfcArbitraryClosedProfileDef. Disable IfcRectangleProfileDef - Disable IfcRectangleProfileDef + Nonaktifkan IfcRectangleProfileDef @@ -1650,22 +1654,22 @@ If this is your case, you can disable this and then all profiles will be exporte like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions -like IfcWallStandardCase or IfcBeamStandardCase. -If this option is turned on, FreeCAD will automatically export such objects -as standard cases when the necessary conditions are met. + Beberapa jenis IFC seperti IfcWall atau IfcBeam memiliki versi standar yang spesial +seperti IfcWallStandardCase atau IfcBeamStandardCase. +Jika opsi ini diaktifkan, FreeCAD akan secara otomatis mengekspor objek tersebut +sebagai kasus standar saat kondisi yang diperlukan terpenuhi. Auto-detect and export as standard cases when applicable - Auto-detect and export as standard cases when applicable + Deteksi otomatis dan ekspor sebagai kasus standar saat berlaku If no site is found in the FreeCAD document, a default one will be added. A site is not mandatory but a common practice is to have at least one in the file. - If no site is found in the FreeCAD document, a default one will be added. -A site is not mandatory but a common practice is to have at least one in the file. + Jika tidak ada situs yang ditemukan dalam dokumen FreeCAD, situs bawaan yang akan digunakan. +Sebuah situs tidak wajib tapi praktik umum untuk memiliki setidaknya satu dalam fail. @@ -1730,4 +1734,5030 @@ unit to work with when opening the file. Imperial + + Arch + + + Structure + Struktur + + + + + Beam + Balok + + + + + Column + Column + + + + Create Structures From Selection + Create Structures From Selection + + + + Please select the base object first and then the edges to use as extrusion paths + Please select the base object first and then the edges to use as extrusion paths + + + + Create Structural System + Create Structural System + + + + Please select at least an axis object + Please select at least an axis object + + + + + Create Structure + Create Structure + + + + First point of the beam + First point of the beam + + + + Base point of column + Base point of column + + + + + Next point + Next point + + + + Structure options + Structure options + + + + Drawing mode + Drawing mode + + + + + + Category + Kategori + + + + + + + Preset + Preset + + + + + + + + Length + Panjangnya + + + + + + + Width + Lebar + + + + + + Height + Tinggi + + + + Switch L/H + Switch L/H + + + + Switch L/W + Switch L/W + + + + + + Con&tinue + Con&tinue + + + + Error: The base shape couldn't be extruded along this tool object + Error: The base shape couldn't be extruded along this tool object + + + + + This mesh is an invalid solid + This mesh is an invalid solid + + + + + Facemaker returned an error + Facemaker returned an error + + + + Node Tools + Node Tools + + + + Reset nodes + Reset nodes + + + + Edit nodes + Edit nodes + + + + Extend nodes + Extend nodes + + + + Extends the nodes of this element to reach the nodes of another element + Extends the nodes of this element to reach the nodes of another element + + + + Connect nodes + Connect nodes + + + + Connects nodes of this element with the nodes of another element + Connects nodes of this element with the nodes of another element + + + + Toggle all nodes + Toggle all nodes + + + + Toggles all structural nodes of the document on/off + Toggles all structural nodes of the document on/off + + + + Extrusion Tools + Extrusion Tools + + + + + Select tool... + Select tool... + + + + Select object or edges to be used as a Tool (extrusion path) + Select object or edges to be used as a Tool (extrusion path) + + + + + Choose another Structure object: + Choose another Structure object: + + + + + The chosen object is not a Structure + The chosen object is not a Structure + + + + + The chosen object has no structural nodes + The chosen object has no structural nodes + + + + + One of these objects has more than 2 nodes + One of these objects has more than 2 nodes + + + + + Unable to find a suitable intersection point + Unable to find a suitable intersection point + + + + Intersection found. + + Intersection found. + + + + + Intersection found. + Intersection found. + + + + Done + Selesai + + + + + Couldn't compute a shape + Couldn't compute a shape + + + + You must select a base shape object and optionally a mesh object + You must select a base shape object and optionally a mesh object + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + Objek yang terpilih harus sebuah jaring + + + + This mesh has more than 1000 facets. + Jaring ini memiliki lebih dari 1000 permukaan. + + + + This operation can take a long time. Proceed? + Operasi ini mungkin memakan waktu lama. Proses? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + Jaringnya memiliki lebih dari 500 permukaan. Ini akan memakan beberapa menit... + + + + Create 3 views + Buat 3 tampilan + + + + BuildingPart + BuildingPart + + + + Create BuildingPart + Buat BuildingPart + + + + Deactivate + Deactivate + + + + Activate + Activate + + + + Set working plane + Tetapkan bidang kerja + + + + Write camera position + Tulis posisi kamera + + + + Create group... + Membuat grup... + + + + + Reorder children alphabetically + Susun ulang nilai menurut abjad + + + + Clone level up + Clone level up + + + + + + Arch + Lengkungan + + + + Create profile + Buat profil + + + + Profile settings + Setelan profil + + + + Create Profile + Buat Profil + + + + Profile + Profil + + + + Please either select only Building objects or nothing at all! + +Site is not allowed to accept any other object besides Building. + +Other objects will be removed from the selection. + +Note: You can change that in the preferences. + Mohon pilih antara hanya objek Building atau tidak sama sekali! + +Situs tidak diperbolehkan untuk enerima objek lain selain Building. + +Objek lainnya akan dihilangkan dari seleksi. + +Catatan: Anda dapat mengubahnya di setelan. + + + + There is no valid object in the selection. + +Site creation aborted. + Tidak ada objek valid dalam seleksi. + +Pembuatan situs dibatalkan. + + + + Create Site + Buat situs + + + + + Create Roof + Buat Roof + + + + + Unable to create a roof + Tidak dapat membuat sebuah atap + + + + + + Please select a base object + Mohon pilih sebuah objek dasar + + + + Roof + Atap + + + + Parameters of the roof profiles : +* Angle : slope in degrees relative to the horizontal. +* Run : horizontal distance between the wall and the ridge. +* Thickness : thickness of the roof. +* Overhang : horizontal distance between the eave and the wall. +* Height : height of the ridge above the base (calculated automatically). +* IdRel : Id of the relative profile used for automatic calculations. +--- +If Angle = 0 and Run = 0 then the profile is identical to the relative profile. +If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. +If Run = 0 then the run is calculated so that the height is the same as the relative profile. + Parameters of the roof profiles : +* Angle : slope in degrees relative to the horizontal. +* Run : horizontal distance between the wall and the ridge. +* Thickness : thickness of the roof. +* Overhang : horizontal distance between the eave and the wall. +* Height : height of the ridge above the base (calculated automatically). +* IdRel : Id of the relative profile used for automatic calculations. +--- +If Angle = 0 and Run = 0 then the profile is identical to the relative profile. +If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. +If Run = 0 then the run is calculated so that the height is the same as the relative profile. + + + + Id + Id + + + + Angle (deg) + Sudut (deg) + + + + Run (mm) + Run (mm) + + + + IdRel + IdRel + + + + Thickness (mm) + Ketebalan (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Tinggi (mm) + + + + Door + Door + + + + Cutting + Pemotongan + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Which side to cut + Which side to cut + + + + Behind + Behind + + + + Front + Depan + + + + Reload reference + Reload reference + + + + Open reference + Open reference + + + + Create external reference + Create external reference + + + + + + + Error: Couldn't determine character encoding + Error: Couldn't determine character encoding + + + + Frame + Frame + + + + Create Frame + Create Frame + + + + Crossing point not found in profile. + Crossing point not found in profile. + + + + Shapes elevation + Shapes elevation + + + + Choose which field provides shapes elevations: + Choose which field provides shapes elevations: + + + + No shape found in this file + No shape found in this file + + + + Shapefile module not found + Shapefile module not found + + + + The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + + + + Error: Unable to download from: + Error: Unable to download from: + + + + Could not download shapefile module. Aborting. + Could not download shapefile module. Aborting. + + + + Shapefile module not downloaded. Aborting. + Shapefile module not downloaded. Aborting. + + + + Shapefile module not found. Aborting. + Shapefile module not found. Aborting. + + + + The shapefile library can be downloaded from the following URL and installed in your macros folder: + The shapefile library can be downloaded from the following URL and installed in your macros folder: + + + + Window + Jendela + + + + + + Create Window + Create Window + + + + Choose a face on an existing object or select a preset + Choose a face on an existing object or select a preset + + + + Window not based on sketch. Window not aligned or resized. + Window not based on sketch. Window not aligned or resized. + + + + No Width and/or Height constraint in window sketch. Window not resized. + No Width and/or Height constraint in window sketch. Window not resized. + + + + No window found. Cannot continue. + No window found. Cannot continue. + + + + Window options + Window options + + + + Auto include in host object + Auto include in host object + + + + Sill height + Sill height + + + + This window has no defined opening + This window has no defined opening + + + + + + Get selected edge + Get selected edge + + + + Unable to create component + Unable to create component + + + + Window elements + Window elements + + + + Hole wire + Hole wire + + + + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire + + + + Pick selected + Pilih yang dipilih + + + + + + + + + Remove + Menghapus + + + + + + + + Add + Menambahkan + + + + + + + + + + + + + + + Edit + Edit + + + + Create/update component + Create/update component + + + + Base 2D object + Base 2D object + + + + + Wires + Wires + + + + + Components + Komponen + + + + Create new component + Create new component + + + + + + Name + Nama + + + + + + Type + Jenis + + + + + + + Thickness + Thickness + + + + + Offset + Mengimbangi + + + + Hinge + Hinge + + + + Opening mode + Opening mode + + + + + + default + + default + + + + If this is checked, the default Frame value of this window will be added to the value entered here + If this is checked, the default Frame value of this window will be added to the value entered here + + + + If this is checked, the default Offset value of this window will be added to the value entered here + If this is checked, the default Offset value of this window will be added to the value entered here + + + + Press to retrieve the selected edge + Press to retrieve the selected edge + + + + + Invert opening direction + Invert opening direction + + + + + Invert hinge position + Invert hinge position + + + + Only axes must be selected + Only axes must be selected + + + + Create Axis System + Create Axis System + + + + Please select at least one axis + Please select at least one axis + + + + + + Axes + Axes + + + + Axis system components + Axis system components + + + + + + + Successfully written + Successfully written + + + + Truss + Truss + + + + + Please select only one base object or none + Please select only one base object or none + + + + + Create Truss + Create Truss + + + + Couldn't locate IfcOpenShell + Couldn't locate IfcOpenShell + + + + IfcOpenShell not found or disabled, falling back on internal parser. + IfcOpenShell not found or disabled, falling back on internal parser. + + + + IFC Schema not found, IFC import disabled. + IFC Schema not found, IFC import disabled. + + + + Error: IfcOpenShell is not installed + Error: IfcOpenShell is not installed + + + + Error: your IfcOpenShell version is too old + Error: your IfcOpenShell version is too old + + + + Create Project + Create Project + + + + Create Stairs + Create Stairs + + + + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' + + + + changed the type of properties 'RailingLeft' and 'RailingRight' + changed the type of properties 'RailingLeft' and 'RailingRight' + + + + Create material + Create material + + + + Create multi-material + Create multi-material + + + + Merge duplicates + Merge duplicates + + + + + Material + Bahan + + + + New layer + New layer + + + + Total thickness + Jumlah ketebalan + + + + depends on the object + depends on the object + + + + + This exporter can currently only export one site object + This exporter can currently only export one site object + + + + Error: Space '%s' has no Zone. Aborting. + Error: Space '%s' has no Zone. Aborting. + + + + pycollada not found, collada support is disabled. + pycollada not found, collada support is disabled. + + + + file %s successfully created. + file %s successfully created. + + + + Create Grid + Create Grid + + + + Auto height is larger than height + Auto height is larger than height + + + + Total row size is larger than height + Total row size is larger than height + + + + Auto width is larger than width + Auto width is larger than width + + + + Total column size is larger than width + Total column size is larger than width + + + + Grid + Kisi + + + + Total width + Total width + + + + Total height + Total height + + + + Add row + Menambahkan baris + + + + Del row + Del baris + + + + Add col + Add col + + + + Del col + Del col + + + + Create span + Create span + + + + Remove span + Remove span + + + + Rows + Rows + + + + Columns + Columns + + + + Precast elements + Precast elements + + + + Slab type + Slab type + + + + Chamfer + Talang + + + + Dent length + Dent length + + + + Dent width + Dent width + + + + Dent height + Dent height + + + + Slab base + Slab base + + + + Number of holes + Number of holes + + + + Major diameter of holes + Major diameter of holes + + + + Minor diameter of holes + Minor diameter of holes + + + + Spacing between holes + Spacing between holes + + + + Number of grooves + Number of grooves + + + + Depth of grooves + Depth of grooves + + + + Height of grooves + Height of grooves + + + + Spacing between grooves + Spacing between grooves + + + + Number of risers + Number of risers + + + + Length of down floor + Length of down floor + + + + Height of risers + Height of risers + + + + Depth of treads + Depth of treads + + + + Precast options + Precast options + + + + Dents list + Dents list + + + + Add dent + Add dent + + + + Remove dent + Remove dent + + + + Slant + Slant + + + + Level + Level + + + + Rotation + Rotation + + + + View of + View of + + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + Rotate + Putar + + + + Create Panel Cut + Create Panel Cut + + + + Create Panel Sheet + Create Panel Sheet + + + + Error computing shape of + Error computing shape of + + + + Tools + Alat + + + + Edit views positions + Edit views positions + + + + This object has no face + This object has no face + + + + Curtain Wall + Curtain Wall + + + + + Create Curtain Wall + Create Curtain Wall + + + + + Create Pipe + Create Pipe + + + + Please select exactly 2 or 3 Pipe objects + Please select exactly 2 or 3 Pipe objects + + + + Please select only Pipe objects + Please select only Pipe objects + + + + Create Connector + Create Connector + + + + Unable to build the base path + Unable to build the base path + + + + Unable to build the profile + Unable to build the profile + + + + Unable to build the pipe + Unable to build the pipe + + + + The base object is not a Part + The base object is not a Part + + + + Too many wires in the base shape + Too many wires in the base shape + + + + The base wire is closed + The base wire is closed + + + + The profile is not a 2D Part + The profile is not a 2D Part + + + + The profile is not closed + The profile is not closed + + + + Only the 3 first wires will be connected + Only the 3 first wires will be connected + + + + + Common vertex not found + Common vertex not found + + + + Pipes are already aligned + Pipes are already aligned + + + + At least 2 pipes must align + At least 2 pipes must align + + + + removed property 'Result', and added property 'AutoUpdate' + removed property 'Result', and added property 'AutoUpdate' + + + + added property 'Schedule' + added property 'Schedule' + + + + Unable to retrieve value from object + Unable to retrieve value from object + + + + Remove spreadsheet + Remove spreadsheet + + + + Attach spreadsheet + Attach spreadsheet + + + + Import CSV File + Import CSV File + + + + + Export CSV File + Export CSV File + + + + Unable to recognize that file type + Unable to recognize that file type + + + + + + Description + Description + + + + + + + Value + Nilai + + + + + + Unit + Satuan + + + + Schedule + Schedule + + + + You can put anything but the following objects: Site, Building, and Floor - in a Floor object. + +Floor object is not allowed to accept Site, Building, or Floor objects. + +Site, Building, and Floor objects will be removed from the selection. + +You can change that in the preferences. + You can put anything but the following objects: Site, Building, and Floor - in a Floor object. + +Floor object is not allowed to accept Site, Building, or Floor objects. + +Site, Building, and Floor objects will be removed from the selection. + +You can change that in the preferences. + + + + There is no valid object in the selection. + +Floor creation aborted. + There is no valid object in the selection. + +Floor creation aborted. + + + + Create Floor + Create Floor + + + + Create Axis + Create Axis + + + + Distances (mm) and angles (deg) between axes + Distances (mm) and angles (deg) between axes + + + + Axis + Axis + + + + Distance + Distance + + + + Angle + Sudut + + + + Label + Label + + + + + Found a shape containing curves, triangulating + Found a shape containing curves, triangulating + + + + Successfully imported + Successfully imported + + + + Error computing the shape of this object + Error computing the shape of this object + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + + + + + + + has a null shape + has a null shape + + + + + Toggle subcomponents + Toggle subcomponents + + + + Closing Sketch edit + Closing Sketch edit + + + + Component + Component + + + + Components of this object + Components of this object + + + + Base component + Base component + + + + Additions + Additions + + + + Subtractions + Subtractions + + + + Objects + Objects + + + + Fixtures + Fixtures + + + + Group + Kelompok + + + + Hosts + Hosts + + + + Edit IFC properties + Edit IFC properties + + + + Edit standard code + Edit standard code + + + + Property + Milik + + + + Add property... + Add property... + + + + Add property set... + Add property set... + + + + New... + Baru... + + + + New property + New property + + + + New property set + New property set + + + + + Create Rebar + Create Rebar + + + + Please select a base face on a structural object + Please select a base face on a structural object + + + + Create Section Plane + Create Section Plane + + + + Toggle Cutview + Toggle Cutview + + + + Section plane settings + Section plane settings + + + + Remove highlighted objects from the list above + Remove highlighted objects from the list above + + + + Add selected + Tambahkan yang dipilih + + + + Add selected object(s) to the scope of this section plane + Add selected object(s) to the scope of this section plane + + + + Objects seen by this section plane: + Objects seen by this section plane: + + + + Section plane placement: + Section plane placement: + + + + Rotate X + Rotate X + + + + Rotates the plane along the X axis + Rotates the plane along the X axis + + + + Rotate Y + Rotate Y + + + + Rotates the plane along the Y axis + Rotates the plane along the Y axis + + + + Rotate Z + Rotate Z + + + + Rotates the plane along the Z axis + Rotates the plane along the Z axis + + + + Resize + Resize + + + + Resizes the plane to fit the objects in the list above + Resizes the plane to fit the objects in the list above + + + + + Center + Pusat + + + + Centers the plane on the objects in the list above + Centers the plane on the objects in the list above + + + + You can put anything but Site and Building objects in a Building object. + +Building object is not allowed to accept Site and Building objects. + +Site and Building objects will be removed from the selection. + +You can change that in the preferences. + You can put anything but Site and Building objects in a Building object. + +Building object is not allowed to accept Site and Building objects. + +Site and Building objects will be removed from the selection. + +You can change that in the preferences. + + + + There is no valid object in the selection. + +Building creation aborted. + There is no valid object in the selection. + +Building creation aborted. + + + + Create Building + Create Building + + + + Create Space + Create Space + + + + Set text position + Set text position + + + + Space boundaries + Space boundaries + + + + Wall + Wall + + + + Walls can only be based on Part or Mesh objects + Walls can only be based on Part or Mesh objects + + + + + + Create Wall + Create Wall + + + + First point of wall + First point of wall + + + + Wall options + Wall options + + + + Wall Presets... + Wall Presets... + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + Alignment + Alignment + + + + Left + Kiri + + + + Right + Kanan + + + + Use sketches + Gunakan sketsa + + + + Merge Wall + Merge Wall + + + + The selected wall contains no subwall to merge + The selected wall contains no subwall to merge + + + + + Please select only wall objects + Please select only wall objects + + + + Merge Walls + Merge Walls + + + + Cannot compute blocks for wall + Cannot compute blocks for wall + + + + Error: Unable to modify the base object of this wall + Error: Unable to modify the base object of this wall + + + + Flip direction + Flip direction + + + + Invalid cutplane + Invalid cutplane + + + + is not closed + is not closed + + + + is not valid + is not valid + + + + doesn't contain any solid + doesn't contain any solid + + + + contains a non-closed solid + contains a non-closed solid + + + + contains faces that are not part of any solid + contains faces that are not part of any solid + + + + Survey + Survei + + + + Set description + Set description + + + + Clear + Bersih + + + + Copy Length + Copy Length + + + + Copy Area + Copy Area + + + + Export CSV + Export CSV + + + + Area + Daerah + + + + Total + Total + + + + Object doesn't have settable IFCData + Object doesn't have settable IFCData + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + Add space boundary + Add space boundary + + + + Grouping + Grouping + + + + Remove space boundary + Remove space boundary + + + + Ungrouping + Ungrouping + + + + Split Mesh + Split Mesh + + + + Mesh to Shape + Mesh to Shape + + + + All good! No problems found + All good! No problems found + + + + + Create Component + Create Component + + + + Key + Key + + + + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: + + + + Create IFC properties spreadsheet + Create IFC properties spreadsheet + + + + Arch_StructuresFromSelection + + + Multiple Structures + Multiple Structures + + + + Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + + + + Arch_StructuralSystem + + + Structural System + Structural System + + + + Create a structural system object from a selected structure and axis + Create a structural system object from a selected structure and axis + + + + Arch_Structure + + + Structure + Struktur + + + + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) + + + + App::Property + + + + An optional extrusion path for this element + An optional extrusion path for this element + + + + The computed length of the extrusion path + The computed length of the extrusion path + + + + Start offset distance along the extrusion path (positive: extend, negative: trim) + Start offset distance along the extrusion path (positive: extend, negative: trim) + + + + End offset distance along the extrusion path (positive: extend, negative: trim) + End offset distance along the extrusion path (positive: extend, negative: trim) + + + + Automatically align the Base of the Structure perpendicular to the Tool axis + Automatically align the Base of the Structure perpendicular to the Tool axis + + + + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + + + + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + + + + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + + + + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + + + + + The length of this element, if not based on a profile + The length of this element, if not based on a profile + + + + + The width of this element, if not based on a profile + The width of this element, if not based on a profile + + + + The height or extrusion depth of this element. Keep 0 for automatic + The height or extrusion depth of this element. Keep 0 for automatic + + + + + + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + + + + + The structural nodes of this element + The structural nodes of this element + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Offset distance between the centerline and the nodes line + Offset distance between the centerline and the nodes line + + + + + The facemaker type to use to build the profile of this object + The facemaker type to use to build the profile of this object + + + + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this Arch Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this Arch Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. + + + + If the nodes are visible or not + If the nodes are visible or not + + + + The width of the nodes line + The width of the nodes line + + + + The size of the node points + The size of the node points + + + + The color of the nodes line + The color of the nodes line + + + + The type of structural node + The type of structural node + + + + Axes systems this structure is built on + Axes systems this structure is built on + + + + The element numbers to exclude when this structure is based on axes + The element numbers to exclude when this structure is based on axes + + + + If true the element are aligned with axes + If true the element are aligned with axes + + + + The model description of this equipment + The model description of this equipment + + + + The URL of the product page of this equipment + The URL of the product page of this equipment + + + + + A standard code (MasterFormat, OmniClass,...) + A standard code (MasterFormat, OmniClass,...) + + + + Additional snap points for this equipment + Additional snap points for this equipment + + + + The electric power needed by this equipment in Watts + The electric power needed by this equipment in Watts + + + + + + The type of this building + The type of this building + + + + + The height of this object + The height of this object + + + + If true, the height value propagates to contained objects + If true, the height value propagates to contained objects + + + + The level of the (0,0,0) point of this level + The level of the (0,0,0) point of this level + + + + + The computed floor area of this floor + The computed floor area of this floor + + + + + An optional description for this component + An optional description for this component + + + + + An optional tag for this component + An optional tag for this component + + + + + The shape of this object + The shape of this object + + + + This property stores an inventor representation for this object + This property stores an inventor representation for this object + + + + If true, only solids will be collected by this object when referenced from other files + If true, only solids will be collected by this object when referenced from other files + + + + A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + + + + + The line width of this object + The line width of this object + + + + An optional unit to express levels + An optional unit to express levels + + + + A transformation to apply to the level mark + A transformation to apply to the level mark + + + + If true, show the level + If true, show the level + + + + If true, show the unit on the level tag + If true, show the unit on the level tag + + + + If true, display offset will affect the origin mark too + If true, display offset will affect the origin mark too + + + + If true, the object's label is displayed + If true, the object's label is displayed + + + + The font to be used for texts + The font to be used for texts + + + + The font size of texts + The font size of texts + + + + The individual face colors + The individual face colors + + + + If true, when activated, the working plane will automatically adapt to this level + If true, when activated, the working plane will automatically adapt to this level + + + + If set to True, the working plane will be kept on Auto mode + If set to True, the working plane will be kept on Auto mode + + + + Camera position data associated with this object + Camera position data associated with this object + + + + If set, the view stored in this object will be restored on double-click + If set, the view stored in this object will be restored on double-click + + + + If True, double-clicking this object in the tree activates it + If True, double-clicking this object in the tree activates it + + + + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. + + + + A slot to save the inventor representation of this object, if enabled + A slot to save the inventor representation of this object, if enabled + + + + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings + + + + The line width of child objects + The line width of child objects + + + + The line color of child objects + The line color of child objects + + + + The shape color of child objects + The shape color of child objects + + + + The transparency of child objects + The transparency of child objects + + + + Cut the view above this level + Cut the view above this level + + + + The distance between the level plane and the cut line + The distance between the level plane and the cut line + + + + Turn cutting on when activating this level + Turn cutting on when activating this level + + + + The capture box for newly created objects expressed as [XMin,YMin,ZMin,XMax,YMax,ZMax] + The capture box for newly created objects expressed as [XMin,YMin,ZMin,XMax,YMax,ZMax] + + + + Turns auto group box on/off + Turns auto group box on/off + + + + Automatically set size from contents + Automatically set size from contents + + + + A margin to use when autosize is turned on + A margin to use when autosize is turned on + + + + Outside Diameter + Outside Diameter + + + + Wall thickness + Wall thickness + + + + + + + + + Width of the beam + Width of the beam + + + + + + + + + Height of the beam + Height of the beam + + + + + Thickness of the web + Thickness of the web + + + + + Thickness of the flanges + Thickness of the flanges + + + + Thickness of the sides + Thickness of the sides + + + + Thickness of the webs + Thickness of the webs + + + + Thickness of the flange + Thickness of the flange + + + + Thickness of the legs + Thickness of the legs + + + + The base terrain of this site + The base terrain of this site + + + + The street and house number of this site, with postal box or apartment number if needed + The street and house number of this site, with postal box or apartment number if needed + + + + The postal or zip code of this site + The postal or zip code of this site + + + + The city of this site + The city of this site + + + + The region, province or county of this site + The region, province or county of this site + + + + The country of this site + The country of this site + + + + + The latitude of this site + The latitude of this site + + + + Angle between the true North and the North direction in this document + Angle between the true North and the North direction in this document + + + + The elevation of level 0 of this site + The elevation of level 0 of this site + + + + A URL that shows this site in a mapping website + A URL that shows this site in a mapping website + + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + + The area of the projection of this object onto the XY plane + The area of the projection of this object onto the XY plane + + + + The perimeter length of the projected area + The perimeter length of the projected area + + + + The volume of earth to be added to this terrain + The volume of earth to be added to this terrain + + + + The volume of earth to be removed from this terrain + The volume of earth to be removed from this terrain + + + + An extrusion vector to use when performing boolean operations + An extrusion vector to use when performing boolean operations + + + + Remove splitters from the resulting shape + Remove splitters from the resulting shape + + + + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates + + + + + The type of this object + The type of this object + + + + The time zone where this site is located + The time zone where this site is located + + + + An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one + + + + Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module + + + + Show solar diagram or not + Show solar diagram or not + + + + The scale of the solar diagram + The scale of the solar diagram + + + + The position of the solar diagram + The position of the solar diagram + + + + The color of the solar diagram + The color of the solar diagram + + + + When set to 'True North' the whole geometry will be rotated to match the true north of this site + When set to 'True North' the whole geometry will be rotated to match the true north of this site + + + + Show compass or not + Show compass or not + + + + The rotation of the Compass relative to the Site + The rotation of the Compass relative to the Site + + + + The position of the Compass relative to the Site placement + The position of the Compass relative to the Site placement + + + + Update the Declination value based on the compass rotation + Update the Declination value based on the compass rotation + + + + The list of angles of the roof segments + The list of angles of the roof segments + + + + The list of horizontal length projections of the roof segments + The list of horizontal length projections of the roof segments + + + + The list of IDs of the relative profiles of the roof segments + The list of IDs of the relative profiles of the roof segments + + + + The list of thicknesses of the roof segments + The list of thicknesses of the roof segments + + + + The list of overhangs of the roof segments + The list of overhangs of the roof segments + + + + The list of calculated heights of the roof segments + The list of calculated heights of the roof segments + + + + The face number of the base object used to build the roof + The face number of the base object used to build the roof + + + + The total length of the ridges and hips of the roof + The total length of the ridges and hips of the roof + + + + The total length of the borders of the roof + The total length of the borders of the roof + + + + Specifies if the direction of the roof should be flipped + Specifies if the direction of the roof should be flipped + + + + The base file this component is built upon + The base file this component is built upon + + + + The part to use from the base file + The part to use from the base file + + + + The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation + The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation + + + + Fuse objects of same material + Fuse objects of same material + + + + The latest time stamp of the linked file + The latest time stamp of the linked file + + + + If true, the colors from the linked file will be kept updated + If true, the colors from the linked file will be kept updated + + + + The profile used to build this frame + The profile used to build this frame + + + + Specifies if the profile must be aligned with the extrusion wires + Specifies if the profile must be aligned with the extrusion wires + + + + An offset vector between the base sketch and the frame + An offset vector between the base sketch and the frame + + + + Crossing point of the path on the profile. + Crossing point of the path on the profile. + + + + An optional additional placement to add to the profile before extruding it + An optional additional placement to add to the profile before extruding it + + + + The rotation of the profile around its extrusion axis + The rotation of the profile around its extrusion axis + + + + The type of edges to consider + The type of edges to consider + + + + If true, geometry is fused, otherwise a compound + If true, geometry is fused, otherwise a compound + + + + The objects that host this window + The objects that host this window + + + + The components of this window + The components of this window + + + + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + + + + An optional object that defines a volume to be subtracted from hosts of this window + An optional object that defines a volume to be subtracted from hosts of this window + + + + The width of this window + The width of this window + + + + The height of this window + The height of this window + + + + The normal direction of this window + The normal direction of this window + + + + The preset number this window is based on + The preset number this window is based on + + + + The frame size of this window + The frame size of this window + + + + The offset size of this window + The offset size of this window + + + + The area of this window + The area of this window + + + + The width of louvre elements + The width of louvre elements + + + + The space between louvre elements + The space between louvre elements + + + + Opens the subcomponents that have a hinge defined + Opens the subcomponents that have a hinge defined + + + + The number of the wire that defines the hole. If 0, the value will be calculated automatically + The number of the wire that defines the hole. If 0, the value will be calculated automatically + + + + Shows plan opening symbols if available + Shows plan opening symbols if available + + + + Show elevation opening symbols if available + Show elevation opening symbols if available + + + + The number of the wire that defines the hole. A value of 0 means automatic + The number of the wire that defines the hole. A value of 0 means automatic + + + + The axes this system is made of + The axes this system is made of + + + + The placement of this axis system + The placement of this axis system + + + + The angle of the truss + The angle of the truss + + + + The slant type of this truss + The slant type of this truss + + + + The normal direction of this truss + The normal direction of this truss + + + + The height of the truss at the start position + The height of the truss at the start position + + + + The height of the truss at the end position + The height of the truss at the end position + + + + An optional start offset for the top strut + An optional start offset for the top strut + + + + An optional end offset for the top strut + An optional end offset for the top strut + + + + The height of the main top and bottom elements of the truss + The height of the main top and bottom elements of the truss + + + + The width of the main top and bottom elements of the truss + The width of the main top and bottom elements of the truss + + + + The type of the middle element of the truss + The type of the middle element of the truss + + + + The direction of the rods + The direction of the rods + + + + The diameter or side of the rods + The diameter or side of the rods + + + + The number of rod sections + The number of rod sections + + + + If the truss has a rod at its endpoint or not + If the truss has a rod at its endpoint or not + + + + How to draw the rods + How to draw the rods + + + + The length of these stairs, if no baseline is defined + The length of these stairs, if no baseline is defined + + + + The width of these stairs + The width of these stairs + + + + The total height of these stairs + The total height of these stairs + + + + The alignment of these stairs on their baseline, if applicable + The alignment of these stairs on their baseline, if applicable + + + + The width of a Landing (Second edge and after - First edge follows Width property) + The width of a Landing (Second edge and after - First edge follows Width property) + + + + The number of risers in these stairs + The number of risers in these stairs + + + + The depth of the treads of these stairs + The depth of the treads of these stairs + + + + The height of the risers of these stairs + The height of the risers of these stairs + + + + The size of the nosing + The size of the nosing + + + + The thickness of the treads + The thickness of the treads + + + + The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in + The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in + + + + The thickness of the risers + The thickness of the risers + + + + The depth of the landing of these stairs + The depth of the landing of these stairs + + + + The depth of the treads of these stairs - Enforced regardless of Length or edge's Length + The depth of the treads of these stairs - Enforced regardless of Length or edge's Length + + + + The height of the risers of these stairs - Enforced regardless of Height or edge's Height + The height of the risers of these stairs - Enforced regardless of Height or edge's Height + + + + The direction of flight after landing + The direction of flight after landing + + + + The 'absolute' top level of a flight of stairs leads to + The 'absolute' top level of a flight of stairs leads to + + + + + The 'left outline' of stairs + The 'left outline' of stairs + + + + The 'left outline' of all segments of stairs + The 'left outline' of all segments of stairs + + + + The 'right outline' of all segments of stairs + The 'right outline' of all segments of stairs + + + + The type of landings of these stairs + The type of landings of these stairs + + + + The type of winders in these stairs + The type of winders in these stairs + + + + The type of structure of these stairs + The type of structure of these stairs + + + + The thickness of the massive structure or of the stringers + The thickness of the massive structure or of the stringers + + + + The width of the stringers + The width of the stringers + + + + The offset between the border of the stairs and the structure + The offset between the border of the stairs and the structure + + + + + The overlap of the stringers above the bottom of the treads + The overlap of the stringers above the bottom of the treads + + + + The thickness of the lower floor slab + The thickness of the lower floor slab + + + + The thickness of the upper floor slab + The thickness of the upper floor slab + + + + The type of connection between the lower floor slab and the start of the stairs + The type of connection between the lower floor slab and the start of the stairs + + + + The type of connection between the end of the stairs and the upper floor slab + The type of connection between the end of the stairs and the upper floor slab + + + + A single section of the fence + A single section of the fence + + + + A single fence post + A single fence post + + + + The Path the fence should follow + The Path the fence should follow + + + + The number of sections the fence is built of + The number of sections the fence is built of + + + + The number of posts used to build the fence + The number of posts used to build the fence + + + + When true, the fence will be colored like the original post and section. + When true, the fence will be colored like the original post and section. + + + + + A description for this material + A description for this material + + + + A URL where to find information about this material + A URL where to find information about this material + + + + The transparency value of this material + The transparency value of this material + + + + The color of this material + Warna bahan ini + + + + The color of this material when cut + The color of this material when cut + + + + The list of layer names + The list of layer names + + + + The list of layer materials + The list of layer materials + + + + The list of layer thicknesses + The list of layer thicknesses + + + + IFC data + IFC data + + + + IFC properties of this object + IFC properties of this object + + + + + Description of IFC attributes are not yet implemented + Description of IFC attributes are not yet implemented + + + + The length of this element + The length of this element + + + + The width of this element + The width of this element + + + + The height of this element + The height of this element + + + + + + The size of the chamfer of this element + The size of the chamfer of this element + + + + The dent length of this element + The dent length of this element + + + + + The dent height of this element + The dent height of this element + + + + + The dents of this element + The dents of this element + + + + The chamfer length of this element + The chamfer length of this element + + + + The base length of this element + The base length of this element + + + + The groove depth of this element + The groove depth of this element + + + + The groove height of this element + The groove height of this element + + + + The spacing between the grooves of this element + The spacing between the grooves of this element + + + + The number of grooves of this element + The number of grooves of this element + + + + The dent width of this element + The dent width of this element + + + + The type of this slab + The type of this slab + + + + The size of the base of this element + The size of the base of this element + + + + The number of holes in this element + The number of holes in this element + + + + The major radius of the holes of this element + The major radius of the holes of this element + + + + The minor radius of the holes of this element + The minor radius of the holes of this element + + + + The spacing between the holes of this element + The spacing between the holes of this element + + + + The length of the down floor of this element + The length of the down floor of this element + + + + The number of risers in this element + The number of risers in this element + + + + The riser height of this element + The riser height of this element + + + + The tread depth of this element + The tread depth of this element + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + The length of waves for corrugated elements + The length of waves for corrugated elements + + + + The height of waves for corrugated elements + The height of waves for corrugated elements + + + + The horizontal offset of waves for corrugated elements + The horizontal offset of waves for corrugated elements + + + + The direction of waves for corrugated elements + The direction of waves for corrugated elements + + + + The type of waves for corrugated elements + The type of waves for corrugated elements + + + + If the wave also affects the bottom side or not + If the wave also affects the bottom side or not + + + + The area of this panel + The area of this panel + + + + The linked object + The linked object + + + + + The size of the tag text + The size of the tag text + + + + + The font of the tag text + The font of the tag text + + + + The text to display. Can be %tag%, %label% or %description% to display the panel tag or label + The text to display. Can be %tag%, %label% or %description% to display the panel tag or label + + + + + The position of the tag text. Keep (0,0,0) for center position + The position of the tag text. Keep (0,0,0) for center position + + + + + The rotation of the tag text + The rotation of the tag text + + + + + If True, the object is rendered as a face, if possible. + If True, the object is rendered as a face, if possible. + + + + The allowed angles this object can be rotated to when placed on sheets + The allowed angles this object can be rotated to when placed on sheets + + + + An offset value to move the cut plane from the center point + An offset value to move the cut plane from the center point + + + + + A margin inside the boundary + A margin inside the boundary + + + + + Turns the display of the margin on/off + Turns the display of the margin on/off + + + + The linked Panel cuts + The linked Panel cuts + + + + The tag text to display + The tag text to display + + + + The font file + The font file + + + + The width of the sheet + The width of the sheet + + + + The height of the sheet + The height of the sheet + + + + The fill ratio of this sheet + The fill ratio of this sheet + + + + Specifies an angle for the wood grain (Clockwise, 0 is North) + Specifies an angle for the wood grain (Clockwise, 0 is North) + + + + Specifies the scale applied to each panel view. + Specifies the scale applied to each panel view. + + + + A list of possible rotations for the nester + A list of possible rotations for the nester + + + + Turns the display of the wood grain texture on/off + Turns the display of the wood grain texture on/off + + + + An optional host object for this curtain wall + An optional host object for this curtain wall + + + + The height of the curtain wall, if based on an edge + The height of the curtain wall, if based on an edge + + + + The number of vertical mullions + The number of vertical mullions + + + + If the profile of the vertical mullions get aligned with the surface or not + If the profile of the vertical mullions get aligned with the surface or not + + + + The number of vertical sections of this curtain wall + The number of vertical sections of this curtain wall + + + + The height of the vertical mullions profile, if no profile is used + The height of the vertical mullions profile, if no profile is used + + + + The width of the vertical mullions profile, if no profile is used + The width of the vertical mullions profile, if no profile is used + + + + A profile for vertical mullions (disables vertical mullion size) + A profile for vertical mullions (disables vertical mullion size) + + + + The number of horizontal mullions + The number of horizontal mullions + + + + If the profile of the horizontal mullions gets aligned with the surface or not + If the profile of the horizontal mullions gets aligned with the surface or not + + + + The number of horizontal sections of this curtain wall + The number of horizontal sections of this curtain wall + + + + The height of the horizontal mullions profile, if no profile is used + The height of the horizontal mullions profile, if no profile is used + + + + The width of the horizontal mullions profile, if no profile is used + The width of the horizontal mullions profile, if no profile is used + + + + A profile for horizontal mullions (disables horizontal mullion size) + A profile for horizontal mullions (disables horizontal mullion size) + + + + The number of diagonal mullions + The number of diagonal mullions + + + + The size of the diagonal mullions, if any, if no profile is used + The size of the diagonal mullions, if any, if no profile is used + + + + A profile for diagonal mullions, if any (disables horizontal mullion size) + A profile for diagonal mullions, if any (disables horizontal mullion size) + + + + The number of panels + The number of panels + + + + The thickness of the panels + The thickness of the panels + + + + Swaps horizontal and vertical lines + Swaps horizontal and vertical lines + + + + Perform subtractions between components so none overlap + Perform subtractions between components so none overlap + + + + Centers the profile over the edges or not + Centers the profile over the edges or not + + + + The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + + + + The diameter of this pipe, if not based on a profile + The diameter of this pipe, if not based on a profile + + + + The length of this pipe, if not based on an edge + The length of this pipe, if not based on an edge + + + + An optional closed profile to base this pipe on + An optional closed profile to base this pipe on + + + + Offset from the start point + Offset from the start point + + + + Offset from the end point + Offset from the end point + + + + The wall thickness of this pipe, if not based on a profile + The wall thickness of this pipe, if not based on a profile + + + + The curvature radius of this connector + The curvature radius of this connector + + + + The pipes linked by this connector + The pipes linked by this connector + + + + The type of this connector + The type of this connector + + + + The description column + The description column + + + + The values column + The values column + + + + The units column + The units column + + + + The objects column + The objects column + + + + The filter column + The filter column + + + + If True, a spreadsheet containing the results is recreated when needed + If True, a spreadsheet containing the results is recreated when needed + + + + If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + + + + The Arch Schedule that uses this spreadsheet + The Arch Schedule that uses this spreadsheet + + + + If True, additional lines with each individual object are added to the results + If True, additional lines with each individual object are added to the results + + + + + The placement of this object + The placement of this object + + + + The intervals between axes + The intervals between axes + + + + The angles of each axis + The angles of each axis + + + + The label of each axis + The label of each axis + + + + An optional custom bubble number + An optional custom bubble number + + + + The length of the axes + The length of the axes + + + + If not zero, the axes are not represented as one full line but as two lines of the given length + If not zero, the axes are not represented as one full line but as two lines of the given length + + + + The size of the axis bubbles + The size of the axis bubbles + + + + The numbering style + The numbering style + + + + The type of line to draw this axis + The type of line to draw this axis + + + + Where to add bubbles to this axis: Start, end, both or none + Where to add bubbles to this axis: Start, end, both or none + + + + The line width to draw this axis + The line width to draw this axis + + + + The color of this axis + The color of this axis + + + + The number of the first axis + The number of the first axis + + + + The font to use for texts + The font to use for texts + + + + The font size + The font size + + + + If true, show the labels + If true, show the labels + + + + A transformation to apply to each label + A transformation to apply to each label + + + + The base object this component is built upon + The base object this component is built upon + + + + The object this component is cloning + The object this component is cloning + + + + An optional standard (OmniClass, etc...) code for this component + An optional standard (OmniClass, etc...) code for this component + + + + A material for this object + A material for this object + + + + Specifies if moving this object moves its base instead + Specifies if moving this object moves its base instead + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + The area of all vertical faces of this object + The area of all vertical faces of this object + + + + The perimeter length of the horizontal area + The perimeter length of the horizontal area + + + + An optional higher-resolution mesh or shape for this object + An optional higher-resolution mesh or shape for this object + + + + An optional axis or axis system on which this object should be duplicated + An optional axis or axis system on which this object should be duplicated + + + + Use the material color as this object's shape color, if available + Use the material color as this object's shape color, if available + + + + The diameter of the bar + The diameter of the bar + + + + The distance between the border of the beam and the first bar (concrete cover). + The distance between the border of the beam and the first bar (concrete cover). + + + + The distance between the border of the beam and the last bar (concrete cover). + The distance between the border of the beam and the last bar (concrete cover). + + + + The amount of bars + The amount of bars + + + + The spacing between the bars + The spacing between the bars + + + + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. + + + + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. + + + + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. + + + + List of placement of all the bars + List of placement of all the bars + + + + The structure object that hosts this rebar + The structure object that hosts this rebar + + + + The custom spacing of rebar + The custom spacing of rebar + + + + Length of a single rebar + Length of a single rebar + + + + Total length of all rebars + Total length of all rebars + + + + The rebar mark + The rebar mark + + + + Shape of rebar + Shape of rebar + + + + The objects that must be considered by this section plane. Empty means the whole document. + The objects that must be considered by this section plane. Empty means the whole document. + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + If True, resulting views will be clipped to the section plane area. + If True, resulting views will be clipped to the section plane area. + + + + If true, the color of the objects material will be used to fill cut areas. + If true, the color of the objects material will be used to fill cut areas. + + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The transparency of this object + The transparency of this object + + + + + Show the cut in the 3D view + Show the cut in the 3D view + + + + The color of this object + The color of this object + + + + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + + + + Show the label in the 3D view + Show the label in the 3D view + + + + + The name of the font + The name of the font + + + + + The size of the text font + The size of the text font + + + + The objects that make the boundaries of this space object + The objects that make the boundaries of this space object + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The type of this space + The type of this space + + + + The thickness of the floor finish + The thickness of the floor finish + + + + The number of people who typically occupy this space + The number of people who typically occupy this space + + + + The electric power needed to light this space in Watts + The electric power needed to light this space in Watts + + + + The electric power needed by the equipment of this space in Watts + The electric power needed by the equipment of this space in Watts + + + + If True, Equipment Power will be automatically filled by the equipment included in this space + If True, Equipment Power will be automatically filled by the equipment included in this space + + + + The type of air conditioning of this space + The type of air conditioning of this space + + + + Specifies if this space is internal or external + Specifies if this space is internal or external + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The color of the area text + The color of the area text + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + The length of this wall. Not used if this wall is based on an underlying object + The length of this wall. Not used if this wall is based on an underlying object + + + + The width of this wall. Not used if this wall is based on a face + The width of this wall. Not used if this wall is based on a face + + + + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + + + + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + + + + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + + + + The area of this wall as a simple Height * Length calculation + The area of this wall as a simple Height * Length calculation + + + + The alignment of this wall on its base object, if applicable + The alignment of this wall on its base object, if applicable + + + + The face number of the base object used to build this wall + The face number of the base object used to build this wall + + + + The offset between this wall and its baseline (only for left and right alignments) + The offset between this wall and its baseline (only for left and right alignments) + + + + Enable this to make the wall generate blocks + Enable this to make the wall generate blocks + + + + The length of each block + The length of each block + + + + The height of each block + The height of each block + + + + The horizontal offset of the first line of blocks + The horizontal offset of the first line of blocks + + + + The horizontal offset of the second line of blocks + The horizontal offset of the second line of blocks + + + + The size of the joints between each block + The size of the joints between each block + + + + The number of entire blocks + The number of entire blocks + + + + The number of broken blocks + The number of broken blocks + + + + Arch_StructureTools + + + + Structure tools + Structure tools + + + + Arch_Equipment + + + Equipment + Peralatan + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + + + + Arch_BuildingPart + + + BuildingPart + BuildingPart + + + + Creates a BuildingPart object including selected objects + Creates a BuildingPart object including selected objects + + + + Draft + + + Writing camera position + Writing camera position + + + + + + + Draft + Konsep + + + + + + Import-Export + Ekspor Impor + + + + Workbench + + + Structure tools + Structure tools + + + + Axis tools + Axis tools + + + + Panel tools + Panel tools + + + + Material tools + Material tools + + + + Pipe tools + Pipe tools + + + + Rebar tools + Rebar tools + + + + Arch tools + Arch tools + + + + Draft creation tools + Draft creation tools + + + + Draft annotation tools + Draft annotation tools + + + + Draft modification tools + Draft modification tools + + + + Draft snap + Draft snap + + + + + &Arch + &Arch + + + + + Utilities + Utilitas + + + + + + + &Draft + &Draft + + + + Creation + Creation + + + + Annotation + Anotasi + + + + Modification + Modification + + + + Arch_RebarTools + + + Rebar tools + Rebar tools + + + + Create various types of rebars, including U-shaped, L-shaped, and stirrup + Create various types of rebars, including U-shaped, L-shaped, and stirrup + + + + Arch_Profile + + + Profile + Profil + + + + Creates a profile object + Creates a profile object + + + + Arch_Site + + + Site + Situs + + + + Creates a site object including selected objects. + Creates a site object including selected objects. + + + + Arch_Roof + + + Roof + Atap + + + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. + + + + Arch_CutLine + + + Cut with line + Cut with line + + + + Cut an object with a line + Cut an object with a line + + + + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Reference + + + External reference + External reference + + + + Creates an external reference object + Creates an external reference object + + + + Arch_Frame + + + Frame + Frame + + + + Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. + Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. + + + + Arch_Window + + + Window + Jendela + + + + Creates a window object from a selected object (wire, rectangle or sketch) + Creates a window object from a selected object (wire, rectangle or sketch) + + + + Arch_AxisSystem + + + Axis System + Sistem Sumbu + + + + Creates an axis system from a set of axes + Creates an axis system from a set of axes + + + + Arch_Truss + + + Truss + Truss + + + + Creates a truss object from selected line or from scratch + Creates a truss object from selected line or from scratch + + + + Arch_Project + + + Project + Proyek + + + + Creates a project entity aggregating the selected sites. + Creates a project entity aggregating the selected sites. + + + + Arch_Stairs + + + Stairs + Tangga + + + + Arch_Space + + + Creates a stairs object + Creates a stairs object + + + + Space + Ruang + + + + Creates a space object from selected boundary objects + Creates a space object from selected boundary objects + + + + Arch_Fence + + + Fence + Fence + + + + Creates a fence object from a selected section, post and path + Creates a fence object from a selected section, post and path + + + + Arch_Material + + + Material + Bahan + + + + Creates or edits the material definition of a selected object. + Creates or edits the material definition of a selected object. + + + + Arch_MultiMaterial + + + Multi-Material + Multi-Material + + + + Creates or edits multi-materials + Creates or edits multi-materials + + + + Arch_MaterialTools + + + + Material tools + Material tools + + + + Arch_Grid + + + Grid + Kisi + + + + Creates a customizable grid object + Creates a customizable grid object + + + + The number of rows + The number of rows + + + + The number of columns + The number of columns + + + + The sizes for rows + The sizes for rows + + + + The sizes of columns + The sizes of columns + + + + The span ranges of cells that are merged together + The span ranges of cells that are merged together + + + + The type of 3D points produced by this grid object + The type of 3D points produced by this grid object + + + + The total width of this grid + The total width of this grid + + + + The total height of this grid + The total height of this grid + + + + Creates automatic column divisions (set to 0 to disable) + Creates automatic column divisions (set to 0 to disable) + + + + Creates automatic row divisions (set to 0 to disable) + Creates automatic row divisions (set to 0 to disable) + + + + When in edge midpoint mode, if this grid must reorient its children along edge normals or not + When in edge midpoint mode, if this grid must reorient its children along edge normals or not + + + + The indices of faces to hide + The indices of faces to hide + + + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Panel_Cut + + + Panel Cut + Panel Potong + + + + Creates 2D views of selected panels + Creates 2D views of selected panels + + + + Arch_Panel_Sheet + + + Panel Sheet + Lembar Panel + + + + Creates a 2D sheet which can contain panel cuts + Creates a 2D sheet which can contain panel cuts + + + + Arch_Nest + + + Nest + Nest + + + + Nests a series of selected shapes in a container + Nests a series of selected shapes in a container + + + + Arch_PanelTools + + + + Panel tools + Panel tools + + + + Arch_CurtainWall + + + Curtain Wall + Curtain Wall + + + + Creates a curtain wall object from selected line or from scratch + Creates a curtain wall object from selected line or from scratch + + + + Arch_Pipe + + + Pipe + Pipa + + + + Creates a pipe object from a given Wire or Line + Creates a pipe object from a given Wire or Line + + + + Arch_PipeConnector + + + Connector + Connector + + + + Creates a connector between 2 or 3 selected pipes + Creates a connector between 2 or 3 selected pipes + + + + Arch_PipeTools + + + + Pipe tools + Pipe tools + + + + Arch_Schedule + + + Schedule + Schedule + + + + Creates a schedule to collect data from the model + Creates a schedule to collect data from the model + + + + Arch_Floor + + + Level + Level + + + + Creates a Building Part object that represents a level, including selected objects + Creates a Building Part object that represents a level, including selected objects + + + + Arch_Axis + + + Axis + Axis + + + + Creates a set of axes + Creates a set of axes + + + + Arch_AxisTools + + + + Axis tools + Axis tools + + + + Arch_Rebar + + + Custom Rebar + Custom Rebar + + + + Creates a Reinforcement bar from the selected face of solid object and/or a sketch + Creates a Reinforcement bar from the selected face of solid object and/or a sketch + + + + Arch_SectionPlane + + + Section Plane + Section Plane + + + + Creates a section plane object, including the selected objects + Creates a section plane object, including the selected objects + + + + Arch_Building + + + Building + Bangunan + + + + Creates a building object including selected objects. + Creates a building object including selected objects. + + + + Arch_Wall + + + Wall + Wall + + + + Creates a wall object from scratch or from a selected object (wire, face or solid) + Creates a wall object from scratch or from a selected object (wire, face or solid) + + + + Arch_MergeWalls + + + Merge Walls + Merge Walls + + + + Merges the selected walls, if possible + Merges the selected walls, if possible + + + + Arch_Add + + + Add component + Add component + + + + Adds the selected components to the active object + Adds the selected components to the active object + + + + Arch_Remove + + + Remove component + Remove component + + + + Remove the selected components from their parents, or create a hole in a component + Remove the selected components from their parents, or create a hole in a component + + + + Arch_SplitMesh + + + Split Mesh + Split Mesh + + + + Splits selected meshes into independent components + Splits selected meshes into independent components + + + + Arch_MeshToShape + + + Mesh to Shape + Mesh to Shape + + + + Turns selected meshes into Part Shape objects + Turns selected meshes into Part Shape objects + + + + Arch_SelectNonSolidMeshes + + + Select non-manifold meshes + Select non-manifold meshes + + + + Selects all non-manifold meshes from the document or from the selected groups + Selects all non-manifold meshes from the document or from the selected groups + + + + Arch_RemoveShape + + + Remove Shape from Arch + Remove Shape from Arch + + + + Removes cubic shapes from Arch components + Removes cubic shapes from Arch components + + + + Arch_CloseHoles + + + Close holes + Close holes + + + + Closes holes in open shapes, turning them solids + Closes holes in open shapes, turning them solids + + + + Arch_Check + + + Check + Check + + + + Checks the selected objects for problems + Checks the selected objects for problems + + + + Arch_Survey + + + Survey + Survei + + + + Starts survey + Starts survey + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + + + Arch_Component + + + Component + Component + + + + Creates an undefined architectural component + Creates an undefined architectural component + + + + Arch_CloneComponent + + + Clone component + Clone component + + + + Clones an object as an undefined architectural component + Clones an object as an undefined architectural component + + + + Arch_IfcSpreadsheet + + + Create IFC spreadsheet... + Create IFC spreadsheet... + + + + Creates a spreadsheet to store IFC properties of an object. + Creates a spreadsheet to store IFC properties of an object. + + + + Arch_ToggleSubs + + + Toggle subcomponents + Toggle subcomponents + + + + Shows or hides the subcomponents of this object + Shows or hides the subcomponents of this object + + + + Command + + + + + Transform + Transform + + diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 25d8e4fb8f..71f84c547a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -2650,7 +2650,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d changed the type of properties 'RailingLeft' and 'RailingRight' - changed the type of properties 'RailingLeft' and 'RailingRight' + cambiato il tipo di proprietà 'RailingLeft' e 'RailingRight' @@ -2933,7 +2933,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Panel options - Panel options + Opzioni pannello @@ -3025,7 +3025,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Too many wires in the base shape - Too many wires in the base shape + Troppe polilinee nella forma base @@ -3081,7 +3081,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Remove spreadsheet - Remove spreadsheet + Rimuovi foglio di calcolo diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts index 091d79b368..14c4f75235 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ka.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts @@ -278,7 +278,7 @@ Leave blank to use all objects from the document If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + თუ ჩართულია, დამატებითი ხაზები შეივსება თითოეული განხილული ობიექტით. თუ არა, მხოლოდ ჯამები. @@ -288,7 +288,7 @@ Leave blank to use all objects from the document If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + თუ ჩართულია, დამგეგმავი და ასოცირებული ცხრილი განახლდება იმდენჯერ, რამდენჯერაც დოკუმენტი გადაითვლება. @@ -2929,7 +2929,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Panel options - Panel options + პანელის მორგება @@ -3062,12 +3062,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + წაიშალა თვისება 'შედეგი' და დაემატა თვისება 'ავტომატური განახლება' added property 'Schedule' - added property 'Schedule' + დამატებულია თვისება 'Schedule' @@ -3077,7 +3077,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + ცხრილის წაშლა @@ -3842,7 +3842,7 @@ Building creation aborted. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this Arch Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this Arch Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. + ArchSketch-ს ბაზის მონიშნული წიბოები (ან წიბოების ჯგუფები) ამ არქიტექტურული სტრუქტურის მონახაზის შექმნისას გამოსაყენებლად (ნაგულისხმებად ყველა საბაზისო მონახაზის წიბოს მაგიერ). საჭიროებს წიბოების ან ჯგუფების ინდექსის ნომრებს. @@ -5369,12 +5369,12 @@ Building creation aborted. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + თუ ჩართულია, დამგეგმავი და ასოცირებული ცხრილი განახლდება იმდენჯერ, რამდენჯერაც დოკუმენტი გადაითვლება The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Arch დამგეგმავი, რომელიც ამ ცხრილს იყენებს diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index f4239b08bb..bf42f54ed3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -2941,7 +2941,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Panel options - Panel options + Paneel opties @@ -3089,7 +3089,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + Rekenblad verwijderen diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index cb9435d4a2..8a1b1afab8 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -280,7 +280,7 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Jeśli ta opcja jest włączona, dla każdego uwzględnionego obiektu zostaną wypełnione dodatkowe linie. Jeśli nie, tylko sumy. @@ -290,7 +290,7 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Jeśli ta opcja jest włączona, harmonogram i powiązany arkusz kalkulacyjny są aktualizowane za każdym razem, gdy dokument jest przeliczany. @@ -2956,7 +2956,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Panel options - Panel options + Opcje panelu @@ -3089,12 +3089,12 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + usunięto właściwość "Wynik" i dodano właściwość "'Aktualizacja automatyczna" added property 'Schedule' - added property 'Schedule' + dodano właściwość "Harmonogram" @@ -3104,7 +3104,7 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Remove spreadsheet - Remove spreadsheet + Usuń Arkusz Kalkulacyjny @@ -5105,7 +5105,7 @@ Tworzenie budynku zostało przerwane. The text to display. Can be %tag%, %label% or %description% to display the panel tag or label - Tekst do wyświetlenia. Może to być %tag%, %label% lub %description%, aby wyświetlić panel tekstowy lub etykietę + Tekst do wyświetlenia. Może to być %tag%, %label% lub %description%, aby wyświetlić panel tekstowy lub nazwę @@ -5390,12 +5390,12 @@ Tworzenie budynku zostało przerwane. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + Jeśli True, harmonogram i powiązany arkusz kalkulacyjny są aktualizowane za każdym razem, gdy dokument jest ponownie przeliczany The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Harmonogram architektoniczny, który używa tego arkusza kalkulacyjnego @@ -5421,7 +5421,7 @@ Tworzenie budynku zostało przerwane. The label of each axis - Etykieta każdej osi + Nazwa każdej osi @@ -5486,7 +5486,7 @@ Tworzenie budynku zostało przerwane. If true, show the labels - Jeśli parametr ma wartość Prawda, pokaż etykiety + Jeśli parametr ma wartość Prawda, pokaż nazwy @@ -5859,7 +5859,7 @@ Tworzenie budynku zostało przerwane. Enable this to make the wall generate blocks - Włącz to, aby ściana generowała bloki + Włącz tę opcję, aby ściana była murowana z pustaków @@ -5869,22 +5869,22 @@ Tworzenie budynku zostało przerwane. The height of each block - Wysokość każdego bloku + Wysokość każdego pustaka The horizontal offset of the first line of blocks - Odsunięcie poziome pierwszej linii bloków + Przesunięcie poziome pierwszej warstwy pustaków The horizontal offset of the second line of blocks - Odsunięcie poziome drugiej linii bloków + Przesunięcie poziome drugiej warstwy pustaków The size of the joints between each block - Rozmiar złączy między każdym blokiem + Grubość spoiny między każdym pustakiem @@ -5894,7 +5894,7 @@ Tworzenie budynku zostało przerwane. The number of broken blocks - Liczba złamanych bloków + Liczba pustaków ułamkowych diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 65146d11a3..c91dcb9b58 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -237,7 +237,7 @@ Poate fi „Numărare” pentru a număra obiectele sau nume de proprietate, cum An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) - An optional unit to express the resulting value. Ex: m^3 (you can also write m³ or m3) + O unitate opțională pentru a exprima valoarea rezultată. Ex: m^3 (puteți scrie și m³ sau m3) @@ -250,10 +250,10 @@ Poate fi „Numărare” pentru a număra obiectele sau nume de proprietate, cum (internal names, not labels), to be considered by this operation. If the list contains groups, children will be added. Leave blank to use all objects from the document - An optional semicolon (;) separated list of object names -(internal names, not labels), to be considered by this operation. -If the list contains groups, children will be added. -Leave blank to use all objects from the document + O listă opțională de nume de obiecte separate prin punct și virgulă (;). +(nume interne, nu etichete), care trebuie luate în considerare de această operațiune. +Dacă lista conține grupuri, copiii vor fi adăugați. +Lăsați necompletat pentru a utiliza toate obiectele din document @@ -263,12 +263,12 @@ Leave blank to use all objects from the document <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> - <html><head/><body><p>An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filer (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive):</p><p><span style=" font-weight:600;">Name:Wall</span> - Will only consider objects with &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Will only consider objects which DON'T have &quot;wall&quot; in their name (internal name)</p><p><span style=" font-weight:600;">Description:Win</span> - Will only consider objects with &quot;win&quot; in their description</p><p><span style=" font-weight:600;">!Label:Win</span> - Will only consider objects which DO NOT have &quot;win&quot; in their label</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Will only consider objects which Ifc Type is &quot;Wall&quot;</p><p><span style=" font-weight:600;">!Tag:Wall</span> - Will only consider objects which tag is NOT &quot;Wall&quot;</p><p>If you leave this field empty, no filtering is applied</p></body></html> + <html><head/><body><p>O listă opțională separată cu punct și virgulă (;) de filtre proprietate:valoare. Predată! la un nume de proprietate pentru a inversa efectul filerului (excludeți obiectele care se potrivesc cu filtrul). Obiectele a căror proprietate conține valoarea vor fi potrivite. Exemple de filtre valide (totul nu face distincție între majuscule și minuscule):</p><p><span style=" font-weight:600;">Nume:Perete</span> - Se vor lua în considerare numai obiectele cu „perete”; în numele lor (nume intern)</p><p><span style=" font-weight:600;">!Name:Wall</span> - Se vor lua în considerare numai obiectele care NU au „perete”; în numele lor (nume intern)</p><p><span style=" font-weight:600;">Descriere:Win</span> - Se vor lua în considerare numai obiectele cu „win”; în descrierea lor</p><p><span style=" font-weight:600;">!Label:Win</span> - Se vor lua în considerare numai obiectele care NU au „win”; în eticheta lor</p><p><span style=" font-weight:600;">IfcType:Wall</span> - Se vor lua în considerare numai obiectele a căror tip Ifc este „Perete”</p><p> <span style=" font-weight:600;">!Tag:Wall</span> - Se vor lua în considerare numai obiectele a căror etichetă NU este „Perete”</p><p>Dacă lăsați acest câmp gol, nu se filtrează se aplică</p></body></html> If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object - If this is enabled, an associated spreadsheet containing the results will be maintained together with this schedule object + În cazul în care acest lucru este activat, o foaie de calcul asociată care conține rezultatele va fi întreținut împreună cu acest obiect program @@ -278,7 +278,7 @@ Leave blank to use all objects from the document If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Dacă acest lucru este activat, liniile suplimentare vor fi completate cu fiecare obiect luat în considerare. Dacă nu, numai totalurile. @@ -288,7 +288,7 @@ Leave blank to use all objects from the document If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + În cazul în care acest lucru este activat, programul și foaia de calcul asociată sunt actualizate ori de câte ori documentul este recalculat. @@ -348,7 +348,7 @@ Leave blank to use all objects from the document <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> - <html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -&gt; New sheet -&gt; From file -&gt; Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> + <html><head/><body><p>Acest lucru exportă rezultatele într-un fișier CSV sau Markdown. </p><p><span style=" font-weight:600;">Notă pentru exportul CSV:</span></p><p>În Libreoffice, puteți păstra acest fișier CSV legat făcând clic dreapta bara de file Foi de calcul -&gt; Foaie nouă -&gt; Din fișier -&gt; Link (Notă: începând cu LibreOffice v6.x, calea corectă acum este: Sheet -&gt; Insert Sheet... -&gt; From file -&gt; Browse...)</p></body></html> @@ -715,7 +715,7 @@ Leave blank to use all objects from the document If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. - If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. + În cazul în care acest lucru este verificat, atunci când un obiect Arch are un material, obiectul va lua culoarea materialului. Aceasta poate fi suprascrisă pentru fiecare obiect. @@ -826,8 +826,8 @@ Leave blank to use all objects from the document This is the SVG stroke-dasharray property to apply to projections of hidden objects. - This is the SVG stroke-dasharray property to apply -to projections of hidden objects. + Aceasta este proprietatea SVG stroke - dasharray care trebuie aplicată +la proiecții de obiecte ascunse. @@ -838,8 +838,8 @@ to projections of hidden objects. Scaling factor for patterns used by object that have a Footprint display mode - Scaling factor for patterns used by object that have -a Footprint display mode + Factorul de scalare pentru modelele utilizate de obiectul care au +un mod de afișare footprint @@ -854,7 +854,7 @@ a Footprint display mode The URL of a bim server instance (www.bimserver.org) to connect to. - The URL of a bim server instance (www.bimserver.org) to connect to. + URL-ul unei instanțe de server bim (www.bimserver.org) la care să te conectezi. @@ -866,9 +866,9 @@ a Footprint display mode If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - If this is selected, the "Open BimServer in browser" -button will open the Bim Server interface in an external browser -instead of the FreeCAD web workbench + Dacă aceasta este selectată, „Deschide BimServer în browser” +butonul va deschide interfața Bim Server într-un browser extern +în loc de bancul de lucru web FreeCAD @@ -1118,8 +1118,8 @@ instead of the FreeCAD web workbench Shows verbose debug messages during import and export of IFC files in the Report view panel - Shows verbose debug messages during import and export -of IFC files in the Report view panel + Arată mesajele de depanare verbose în timpul importului şi exportului +de fişiere IFC în panoul de afișare raport @@ -1130,8 +1130,8 @@ of IFC files in the Report view panel Clones are used when objects have shared geometry One object is the base object, the others are clones. - Clones are used when objects have shared geometry -One object is the base object, the others are clones. + Clonurile sunt folosite atunci când obiectele au fost partajate geometria +Un obiect este obiectul de bază, celelalte sunt clonate. @@ -1149,14 +1149,14 @@ for example, 3 if you have a 4-core CPU. Set it to 1 to use multicore mode in single-core mode; this is safer if you start getting crashes when you set multiple cores. - EXPERIMENTAL -The number of cores to use in multicore mode. -Keep 0 to disable multicore mode. -The maximum value should be your number of cores minus 1, -for example, 3 if you have a 4-core CPU. + EXPERIMENTAL +Numărul de nuclee de utilizat în modul multicore. +Păstrați 0 pentru a dezactiva modul multicore. +Valoarea maximă ar trebui să fie numărul dvs. de nuclee minus 1, +de exemplu, 3 dacă aveți un procesor cu 4 nuclee. -Set it to 1 to use multicore mode in single-core mode; this is safer -if you start getting crashes when you set multiple cores. +Setați-l la 1 pentru a utiliza modul multicore în modul single-core; asta e mai sigur +dacă începeți să primiți blocări atunci când setați mai multe nuclee. @@ -1230,15 +1230,15 @@ if you start getting crashes when you set multiple cores. Only subtypes of the specified element will be imported. Keep the element IfcProduct to import all building elements. - Only subtypes of the specified element will be imported. -Keep the element IfcProduct to import all building elements. + Vor fi importate doar subtipuri ale elementului specificat. +Păstrați elementul IfcProdus pentru a importa toate elementele de construcție. Openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - Openings will be imported as subtractions, otherwise wall shapes -will already have their openings subtracted + Deschiderile vor fi importate ca substraturi, în caz contrar formele de perete +vor avea deja deschiderile lor scăzute @@ -1249,8 +1249,8 @@ will already have their openings subtracted The importer will try to detect extrusions. Note that this might slow things down. - The importer will try to detect extrusions. -Note that this might slow things down. + Importatorul va încerca să detecteze extrudările. +Rețineți că acest lucru ar putea încetini lucrurile. @@ -1270,7 +1270,7 @@ Note that this might slow things down. Object names will be prefixed with the IFC ID number - Object names will be prefixed with the IFC ID number + Numele obiectului vor fi prefixate cu numărul ID-ului IFC @@ -1281,33 +1281,33 @@ Note that this might slow things down. If several materials with the same name and color are found in the IFC file, they will be treated as one. - If several materials with the same name and color are found in the IFC file, -they will be treated as one. + Dacă mai multe materiale cu același nume și aceeași culoare sunt găsite în fișierul IFC, +vor fi tratate ca unul. Merge materials with same name and same color - Merge materials with same name and same color + Îmbinați materiale cu același nume și aceeași culoare Each object will have their IFC properties stored in a spreadsheet object - Each object will have their IFC properties stored in a spreadsheet object + Fiecare obiect va avea proprietățile IFC stocate într-un obiect foii de calcul Import IFC properties in spreadsheet - Import IFC properties in spreadsheet + Importați proprietățile IFC în foaia de calcul IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. - IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. + Fișierele IFC pot conține geometrie necurată sau nesolidă. Dacă această opțiune este bifată, toată geometria este importată, indiferent de valabilitatea acestora. Allow invalid shapes - Allow invalid shapes + Permite forme invalide @@ -1317,14 +1317,14 @@ they will be treated as one. Comma-separated list of IFC entities to be excluded from imports - Comma-separated list of IFC entities to be excluded from imports + Lista separată prin virgulă a entităților IFC care urmează să fie excluse de la import Fit view during import on the imported objects. This will slow down the import, but one can watch the import. - Fit view during import on the imported objects. -This will slow down the import, but one can watch the import. + Afișează vizualizarea în timpul importului pe obiectele importate. +Acest lucru va încetini importul, dar se poate urmări importul. @@ -1335,8 +1335,8 @@ This will slow down the import, but one can watch the import. Creates a full parametric model on import using stored FreeCAD object properties - Creates a full parametric model on import using stored -FreeCAD object properties + Creează un model complet parametru la import folosind +Proprietățile obiectului FreeCAD @@ -1349,15 +1349,15 @@ FreeCAD object properties objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + În cazul în care această opțiune este bifată, implicit 'Proiect', 'Site', 'Building', și 'Storeys' +obiectele care sunt de obicei găsite într-un fișier IFC nu sunt importate, și toate obiectele +sunt plasate în schimb într-un 'Grup'. +'Clădiri' și 'Magazine' sunt încă importate dacă există mai mult de unul. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + Înlocuiți „Proiect”, „Site”, „Clădire” și „Etaj” cu „Grup” @@ -1378,7 +1378,7 @@ are placed in a 'Group' instead. All dimensions in the file will be scaled with this factor - All dimensions in the file will be scaled with this factor + Toate dimensiunile din fișier vor fi scalate cu acest factor @@ -1389,8 +1389,8 @@ are placed in a 'Group' instead. Meshing program that should be used. If using Netgen, make sure that it is available. - Meshing program that should be used. -If using Netgen, make sure that it is available. + Program de redirecționare care ar trebui utilizat. +Dacă utilizați rețeaua, asigurați-vă că este disponibilă. @@ -1420,7 +1420,7 @@ If using Netgen, make sure that it is available. Tessellation value to use with the Builtin and the Mefisto meshing program. - Tessellation value to use with the Builtin and the Mefisto meshing program. + Valoarea teselării de utilizat cu programul Builtin și Mefisto. @@ -1437,9 +1437,9 @@ If using Netgen, make sure that it is available. Grading value to use for meshing using Netgen. This value describes how fast the mesh size decreases. The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - Grading value to use for meshing using Netgen. -This value describes how fast the mesh size decreases. -The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. + Valoarea de clasificare de utilizat pentru rețea folosind Netgen. +Această valoare descrie cât de repede scade dimensiunea ochiului. +Gradientul mărimii rețelei locale h(x) este limitat de |Δh(x)| ≤ 1/valoare. @@ -1449,7 +1449,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Maximum number of segments per edge - Maximum number of segments per edge + Număr maxim de segmente pe muchie @@ -1459,12 +1459,12 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Number of segments per radius - Number of segments per radius + Numărul de segmente pe rază Allow a second order mesh - Allow a second order mesh + Permiteți o plasă de comandă a doua @@ -1484,7 +1484,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Allow quadrilateral faces - Allow quadrilateral faces + Permite fețe patrulatere @@ -1494,7 +1494,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. IFC export - IFC export + export IFC @@ -1505,7 +1505,7 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Show this dialog when exporting - Show this dialog when exporting + Afișați acest dialog la export @@ -1514,37 +1514,37 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - The type of objects that you wish to export: -- Standard model: solid objects. -- Structural analysis: wireframe model for structural calculations. -- Standard + structural: both types of models. + Tipul de obiecte pe care doriți să le exportați: +- Model standard: obiecte solide. +- Analiză structurală: model wireframe pentru calcule structurale. +- Standard + structural: ambele tipuri de modele. Export type - Export type + Tipul de export Standard model - Standard model + Model standard Structural analysis - Structural analysis + Analiză structurală Standard + structural - Standard + structural + Standard + structural Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. -Use this to force all objects to be exported as BREP geometry. + Unii utilizatori IFC nu le plac obiectele exportate ca extruzii. +Utilizați aceasta pentru a forța toate obiectele să fie exportate ca geometrie BREP. @@ -1566,9 +1566,9 @@ Use this to force all objects to be exported as BREP geometry. Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, an additional calculation is done to join coplanar facets. - Curved shapes that cannot be represented as curves in IFC -are decomposed into flat facets. -If this is checked, an additional calculation is done to join coplanar facets. + Forme curbe care nu pot fi reprezentate ca curbe în IFC +sunt descompuse în fațete plate. +Dacă aceasta este bifată, se face un calcul suplimentar pentru a uni fațetele coplanare. @@ -1580,14 +1580,14 @@ If this is checked, an additional calculation is done to join coplanar facets.When exporting objects without unique ID (UID), the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported. This leads to smaller differences between file versions. - When exporting objects without unique ID (UID), the generated UID -will be stored inside the FreeCAD object for reuse next time that object -is exported. This leads to smaller differences between file versions. + Când exportați obiecte fără ID unic (UID), UID-ul generat +va fi stocat în interiorul obiectului FreeCAD pentru a fi reutilizat data viitoare acel obiect +este exportat. Acest lucru duce la diferențe mai mici între versiunile de fișiere. Store IFC unique ID in FreeCAD objects - Store IFC unique ID in FreeCAD objects + Stocați ID-ul unic IFC în obiectele FreeCAD @@ -1595,10 +1595,10 @@ is exported. This leads to smaller differences between file versions. - IFCOpenShell is a library that allows to import IFC files. -Its serializer functionality allows to give it an OCC shape and it will -produce adequate IFC geometry: NURBS, faceted, or anything else. -Note: The serializer is still an experimental feature! + IFCOpenShell este o bibliotecă care permite importarea fișierelor IFC. +Funcționalitatea sa de serializare permite să-i dea o formă OCC și o va face +produce geometrie IFC adecvată: NURBS, fațetate sau orice altceva. +Notă: serializatorul este încă o caracteristică experimentală! @@ -1608,7 +1608,7 @@ Note: The serializer is still an experimental feature! 2D objects will be exported as IfcAnnotation - 2D objects will be exported as IfcAnnotation + Obiectele 2D vor fi exportate ca IfcAnnotation @@ -1619,8 +1619,8 @@ Note: The serializer is still an experimental feature! All FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - All FreeCAD object properties will be stored inside the exported objects, -allowing to recreate a full parametric model on reimport. + Toate proprietățile obiectului FreeCAD vor fi stocate în interiorul obiectelor exportate, +permițând recrearea unui model complet parametric la reimportare. @@ -1631,8 +1631,8 @@ allowing to recreate a full parametric model on reimport. When possible, similar entities will be used only once in the file if possible. This can reduce the file size a lot, but will make it less easily readable. - When possible, similar entities will be used only once in the file if possible. -This can reduce the file size a lot, but will make it less easily readable. + Atunci când este posibil, entități similare vor fi utilizate o singură dată în fișier, dacă este posibil. +Acest lucru poate reduce mult dimensiunea fișierului, dar o va face mai puțin ușor de citit. @@ -1645,10 +1645,10 @@ This can reduce the file size a lot, but will make it less easily readable. - When possible, IFC objects that are extruded rectangles will be -exported as IfcRectangleProfileDef. -However, some other applications might have problems importing that entity. -If this is your case, you can disable this and then all profiles will be exported as IfcArbitraryClosedProfileDef. + Când este posibil, obiectele IFC care sunt extrudate dreptunghiurile vor fi +exportate ca IfcRectangleProfileDef. +Cu toate acestea, alte aplicații ar putea avea probleme la importul entității respective. +În acest caz, puteți dezactiva acest lucru și toate profilurile vor fi exportate ca IfcArbitraryClosedProfileDef. @@ -1661,10 +1661,10 @@ If this is your case, you can disable this and then all profiles will be exporte like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions -like IfcWallStandardCase or IfcBeamStandardCase. -If this option is turned on, FreeCAD will automatically export such objects -as standard cases when the necessary conditions are met. + Unele tipuri de IFC precum IfcWall sau IfcBeam au versiuni standard speciale +precum IfcWallStandardCase sau IfcBeamStandardCase. +Dacă această opţiune este activată, FreeCAD va exporta automat astfel de obiecte +ca cazuri standard atunci când sunt îndeplinite condiţiile necesare. @@ -1675,39 +1675,39 @@ as standard cases when the necessary conditions are met. If no site is found in the FreeCAD document, a default one will be added. A site is not mandatory but a common practice is to have at least one in the file. - If no site is found in the FreeCAD document, a default one will be added. -A site is not mandatory but a common practice is to have at least one in the file. + Dacă nici un site nu este găsit în documentul FreeCAD, va fi adăugat unul implicit. +Un site nu este obligatoriu, dar o practică obișnuită este de a avea cel puțin unul în fișier. Add default site if one is not found in the document - Add default site if one is not found in the document + Adăugați site-ul implicit dacă nu este găsit unul în document If no building is found in the FreeCAD document, a default one will be added. Warning: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there to have a chance to demonstrate our point of view. - If no building is found in the FreeCAD document, a default one will be added. -Warning: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. -However, at FreeCAD, we believe having a building should not be mandatory, and this option is there to have a chance to demonstrate our point of view. + Dacă nu este găsită nici o clădire în documentul FreeCAD, se va adăuga una implicită. +Avertisment: Standardul IFC cere cel puțin o clădire în fiecare fișier. Prin dezactivarea acestei opțiuni, veți produce un fișier IFC nestandardizat. +Cu toate acestea, la FreeCAD, credem că a avea o clădire nu ar trebui să fie obligatorie, și această opțiune are șansa de a ne demonstra punctul de vedere. Add default building if one is not found in the document (no standard) - Add default building if one is not found in the document (no standard) + Adăugați o clădire implicită dacă una nu este găsită în document (niciun standard) If no building storey is found in the FreeCAD document, a default one will be added. A building storey is not mandatory but a common practice to have at least one in the file. - If no building storey is found in the FreeCAD document, a default one will be added. -A building storey is not mandatory but a common practice to have at least one in the file. + Dacă în documentul FreeCAD nu se găseşte nici un etaj de clădire, se va adăuga unul implicit. +O clădire nu este obligatorie, ci o practică comună de a avea cel puțin una în fișier. Add default building storey if one is not found in the document - Add default building storey if one is not found in the document + Adăugați un etaj de clădire implicit dacă nu este găsit unul în document @@ -1718,27 +1718,27 @@ Note that IFC files are ALWAYS written in metric units; imperial units are only a conversion factor applied on top of them. However, some BIM applications will use this factor to choose which unit to work with when opening the file. - The units you want your IFC file to be exported to. + Unitățile în care doriți să fie exportat fișierul dvs. IFC. -Note that IFC files are ALWAYS written in metric units; imperial units -are only a conversion factor applied on top of them. -However, some BIM applications will use this factor to choose which -unit to work with when opening the file. +Rețineți că fișierele IFC sunt ÎNTOTDEAUNA scrise în unități metrice; unități imperiale +sunt doar un factor de conversie aplicat peste ele. +Cu toate acestea, unele aplicații BIM vor folosi acest factor pentru a alege care +unitate cu care să lucreze la deschiderea fișierului. IFC file units - IFC file units + Unități fișier IFC Metric - Metric + Metric Imperial - Imperial + Imperial @@ -1758,59 +1758,59 @@ unit to work with when opening the file. Column - Column + Coloana Create Structures From Selection - Create Structures From Selection + Creează structuri din selecţie Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Vă rugăm să selectaţi mai întâi obiectul de bază şi apoi marginile pentru a utiliza ca căi de extrudare Create Structural System - Create Structural System + Creare sistem structural Please select at least an axis object - Please select at least an axis object + Vă rugăm să selectaţi cel puţin un obiect axis Create Structure - Create Structure + Crează structură First point of the beam - First point of the beam + Primul punct al grinzii Base point of column - Base point of column + Punctul de bază al coloanei Next point - Next point + Următorul punct Structure options - Structure options + Opțiuni structură Drawing mode - Drawing mode + Mod desenare @@ -1825,7 +1825,7 @@ unit to work with when opening the file. Preset - Preset + Presetare @@ -1854,139 +1854,138 @@ unit to work with when opening the file. Switch L/H - Switch L/H + Comutare L/H Switch L/W - Switch L/W + Comutare L/W Con&tinue - Con&tinue + Continuare Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Eroare: Forma de bază nu a putut fi extrasă de-a lungul obiectului acestei unelte This mesh is an invalid solid - This mesh is an invalid solid + Această plasă este un solid nevalid Facemaker returned an error - Facemaker returned an error + Facemaker a returnat o eroare Node Tools - Node Tools + Unelte de modul Reset nodes - Reset nodes + Réinitializare Noduri Edit nodes - Edit nodes + Modul de editare Extend nodes - Extend nodes + Extinde nodurile Extends the nodes of this element to reach the nodes of another element - Extends the nodes of this element to reach the nodes of another element + Extinde nodurile acestui element pentru a ajunge la nodurile altui element Connect nodes - Connect nodes + Conectare Noduri Connects nodes of this element with the nodes of another element - Connects nodes of this element with the nodes of another element + Conectează nodurile acestui element cu nodurile altui element Toggle all nodes - Toggle all nodes + Comută toate nodurile Toggles all structural nodes of the document on/off - Toggles all structural nodes of the document on/off + Activează/dezactivează toate nodurile structurale ale documentului pornit/oprit Extrusion Tools - Extrusion Tools + Instrumente de extracție Select tool... - Select tool... + Selectează uneala... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Selectați obiectul sau marginile pentru a fi folosite ca unealtă (cale de extrudare) Choose another Structure object: - Choose another Structure object: + Alege alt obiect Structura: The chosen object is not a Structure - The chosen object is not a Structure + Obiectul ales nu este o Structură The chosen object has no structural nodes - The chosen object has no structural nodes + Obiectul ales nu are noduri structurale One of these objects has more than 2 nodes - One of these objects has more than 2 nodes + Unul dintre aceste obiecte are mai mult de 2 noduri Unable to find a suitable intersection point - Unable to find a suitable intersection point + Nu s-a putut găsi un punct potrivit de intersecție Intersection found. - Intersection found. - + S-a găsit intersecția. Intersection found. - Intersection found. + S-a găsit intersecția. @@ -1997,47 +1996,47 @@ unit to work with when opening the file. Couldn't compute a shape - Couldn't compute a shape + Nu s-a putut calcula o formă You must select a base shape object and optionally a mesh object - You must select a base shape object and optionally a mesh object + Trebuie să selectați un obiect cu formă de bază și, opțional, un obiect plasă Create Equipment - Create Equipment + Creați echipament You must select exactly one base object - You must select exactly one base object + Trebuie să selectați exact un obiect de bază The selected object must be a mesh - The selected object must be a mesh + Obiectul selectat trebuie să fie o plasă This mesh has more than 1000 facets. - This mesh has more than 1000 facets. + Această plasă are mai mult de 1000 de fațete. This operation can take a long time. Proceed? - This operation can take a long time. Proceed? + Această operație poate dura mult timp. Continua? The mesh has more than 500 facets. This will take a couple of minutes... - The mesh has more than 500 facets. This will take a couple of minutes... + Plasa are peste 500 de fațete. Acest lucru va dura câteva minute... Create 3 views - Create 3 views + Creați 3 vizualizări @@ -2047,7 +2046,7 @@ unit to work with when opening the file. Create BuildingPart - Create BuildingPart + Creați o parte de clădire @@ -2062,12 +2061,12 @@ unit to work with when opening the file. Set working plane - Set working plane + Setați planul de lucru Write camera position - Write camera position + Scrieți poziția camerei @@ -2078,12 +2077,12 @@ unit to work with when opening the file. Reorder children alphabetically - Reorder children alphabetically + Reordonați valorile în ordine alfabetică Clone level up - Clone level up + Clonează un nivel mai sus @@ -2095,17 +2094,17 @@ unit to work with when opening the file. Create profile - Create profile + Crează profilul Profile settings - Profile settings + Setarile profilului Create Profile - Create Profile + Crează profil @@ -2121,51 +2120,51 @@ Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. Note: You can change that in the preferences. - Please either select only Building objects or nothing at all! + Vă rugăm fie selectați numai obiecte de construcție, fie nimic! -Site is not allowed to accept any other object besides Building. +Site-ul nu are voie să accepte niciun alt obiect în afară de Clădire. -Other objects will be removed from the selection. +Alte obiecte vor fi eliminate din selecție. -Note: You can change that in the preferences. +Notă: Puteți modifica acest lucru în preferințe. There is no valid object in the selection. Site creation aborted. - There is no valid object in the selection. + Nu există niciun obiect valid în selecție. -Site creation aborted. +Crearea site-ului a fost anulată. Create Site - Create Site + Creați site Create Roof - Create Roof + Crează acoperiș Unable to create a roof - Unable to create a roof + Nu pot crea acoperișul Please select a base object - Please select a base object + Selectați un obiect de bază Roof - Roof + Acoperiș @@ -2180,17 +2179,17 @@ Site creation aborted. If Angle = 0 and Run = 0 then the profile is identical to the relative profile. If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. If Run = 0 then the run is calculated so that the height is the same as the relative profile. - Parameters of the roof profiles : -* Angle : slope in degrees relative to the horizontal. -* Run : horizontal distance between the wall and the ridge. -* Thickness : thickness of the roof. -* Overhang : horizontal distance between the eave and the wall. -* Height : height of the ridge above the base (calculated automatically). -* IdRel : Id of the relative profile used for automatic calculations. + Parametri pentru profilurile acoperişului: +* Unghiu: pantă în grade faţă de orizontală. +* Rulează: distanţa orizontală dintre perete şi podea. +* Grosime: grosimea acoperișului. +* Suprasolicitate: distanța orizontală dintre ureche și perete. +* Înălțime: înălțimea punții deasupra bazei (calculată automat). +* IdRel: Id profilului relativ utilizat pentru calcule automate. --- -If Angle = 0 and Run = 0 then the profile is identical to the relative profile. -If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. -If Run = 0 then the run is calculated so that the height is the same as the relative profile. +Dacă unghiul = 0 și rulează = 0, atunci profilul este identic cu profilul relativ. +Dacă unghiul = 0, atunci unghiul este calculat astfel încât înălțimea să fie identică cu profilul relativ. +Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea să fie identică cu profilul relativ. @@ -2200,37 +2199,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Angle (deg) - Angle (deg) + Unghiul (grade) Run (mm) - Run (mm) + Distanță (mm) IdRel - IdRel + IdRel Thickness (mm) - Thickness (mm) + Grosime (mm) Overhang (mm) - Overhang (mm) + Suprafață (mm) Height (mm) - Height (mm) + Înălţime (mm) Door - Door + Ușă @@ -2240,22 +2239,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Cut Plane - Cut Plane + Plan de tăiere Cut Plane options - Cut Plane options + Opțiuni ale planului de tăiere Which side to cut - Which side to cut + Care parte se taie Behind - Behind + În spate @@ -2265,17 +2264,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Reload reference - Reload reference + Selectați o referință Open reference - Open reference + Referință deschisă Create external reference - Create external reference + Creează o referință externă @@ -2283,47 +2282,47 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Couldn't determine character encoding - Error: Couldn't determine character encoding + Eroare: nu s-a putut determina codarea caracterelor Frame - Frame + Cadru Create Frame - Create Frame + Crează cadru Crossing point not found in profile. - Crossing point not found in profile. + Punctul de trecere nu a fost găsit în profil. Shapes elevation - Shapes elevation + Forme de elevație Choose which field provides shapes elevations: - Choose which field provides shapes elevations: + Alegeți ce câmp oferă cote de forme: No shape found in this file - No shape found in this file + Nicio formă găsită în acest fișier Shapefile module not found - Shapefile module not found + Modulul hapefile nu a fost găsit The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + Biblioteca python nu a fost găsită în sistemul dvs. Doriți să o descărcați acum de pe <a href="https://github.com/GeospatialPython/pyshp">https://github. om/GeospatialPython/pyshp</a>? Acesta va fi plasat în folderul tău macro. @@ -2672,12 +2671,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create multi-material - Create multi-material + Creează multi-material Merge duplicates - Merge duplicates + Îmbinare dubluri @@ -2688,7 +2687,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela New layer - New layer + Stratul nou @@ -2698,53 +2697,53 @@ If Run = 0 then the run is calculated so that the height is the same as the rela depends on the object - depends on the object + depinde de obiect This exporter can currently only export one site object - This exporter can currently only export one site object + Acest exportator poate exporta în prezent doar un obiect de site Error: Space '%s' has no Zone. Aborting. - Error: Space '%s' has no Zone. Aborting. + Eroare: Spaţiul '%s' nu are nicio zonă. Abandonare. pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. + pycollada nu a fost găsit, suportul collada este dezactivat. file %s successfully created. - file %s successfully created. + fişierul %s a fost creat cu succes. Create Grid - Create Grid + Crează Grid Auto height is larger than height - Auto height is larger than height + Înălţimea generată automat este mai mare decât înălţimea Total row size is larger than height - Total row size is larger than height + Dimensiunea total a rândului este mai mare decât înălţimea Auto width is larger than width - Auto width is larger than width + Lăţimea generată automat este mai mare decât lăţimea Total column size is larger than width - Total column size is larger than width + Dimensiune totală a coloanei este mai mare decât lăţimea @@ -2754,12 +2753,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Total width - Total width + Lățime totală Total height - Total height + Înălţime totală @@ -2774,42 +2773,42 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add col - Add col + Adaugă coloană Del col - Del col + Ștergel coloană Create span - Create span + Creați interval Remove span - Remove span + Eliminați intervalul Rows - Rows + Rânduri Columns - Columns + Coloane Precast elements - Precast elements + Elemente prefabricate Slab type - Slab type + Tip plăci @@ -2819,112 +2818,112 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Dent length - Dent length + Lungimea dentului Dent width - Dent width + Lățimea dentului Dent height - Dent height + Înălțimea dentului Slab base - Slab base + Baza plăcii Number of holes - Number of holes + Numărul de găuri Major diameter of holes - Major diameter of holes + Diametru mare al orificiilor Minor diameter of holes - Minor diameter of holes + Diametru mic al orificiilor Spacing between holes - Spacing between holes + Distanța dintre găuri Number of grooves - Number of grooves + Numărul de caneluri Depth of grooves - Depth of grooves + Adâncimea canelurilor Height of grooves - Height of grooves + Înălțimea canelurilor Spacing between grooves - Spacing between grooves + Distanța dintre caneluri Number of risers - Number of risers + Numărul de ridicări Length of down floor - Length of down floor + Lungimea podelei de jos Height of risers - Height of risers + Înălțimea ridicătorilor Depth of treads - Depth of treads + Adâncimea treptelor de rulare Precast options - Precast options + Opțiuni prefabricate Dents list - Dents list + Lista de dent Add dent - Add dent + Adauga dent Remove dent - Remove dent + Eliminare dent Slant - Slant + Inclinație Level - Level + Nivel @@ -2934,18 +2933,18 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of - View of + Vedere a Create Panel - Create Panel + Creează panou Panel options - Panel options + Opțiunile panoului @@ -2955,17 +2954,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Panel Cut - Create Panel Cut + Creați tăierea panoului Create Panel Sheet - Create Panel Sheet + Creați o foaie de panou Error computing shape of - Error computing shape of + Eroare la calculul formei @@ -2975,146 +2974,146 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Edit views positions - Edit views positions + Editează pozițiile vizualizărilor This object has no face - This object has no face + Acest obiect nu are nicio față Curtain Wall - Curtain Wall + Perete de cortină Create Curtain Wall - Create Curtain Wall + Creează perete de cortină Create Pipe - Create Pipe + Creează ţeavă Please select exactly 2 or 3 Pipe objects - Please select exactly 2 or 3 Pipe objects + Rugăm selectați exact 2 sau 3 obiecte Țeavă Please select only Pipe objects - Please select only Pipe objects + Vă rugăm să selectați doar obiectele Țeavă Create Connector - Create Connector + Creare conector Unable to build the base path - Unable to build the base path + Imposibil de construit calea de bază Unable to build the profile - Unable to build the profile + Imposibil de construit profilul Unable to build the pipe - Unable to build the pipe + Imposibil de construit ţeava The base object is not a Part - The base object is not a Part + Obiectul de bază nu este o parte Too many wires in the base shape - Too many wires in the base shape + Prea multe fire în forma de bază The base wire is closed - The base wire is closed + Firul de bază este închis The profile is not a 2D Part - The profile is not a 2D Part + Profilul nu este un 2D Part The profile is not closed - The profile is not closed + Profilul nu este închis Only the 3 first wires will be connected - Only the 3 first wires will be connected + Doar primele 3 fir vor fi conectate Common vertex not found - Common vertex not found + Vertex comun nu a fost găsit Pipes are already aligned - Pipes are already aligned + Conductele sunt deja aliniate At least 2 pipes must align - At least 2 pipes must align + Cel puţin 2 țevi trebuiesc aliniate removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + a șters proprietatea 'Rezultat' și a adăugat proprietatea 'Actualizare automată' added property 'Schedule' - added property 'Schedule' + a adăugat proprietatea 'Programează' Unable to retrieve value from object - Unable to retrieve value from object + Imposibil de preluat valoarea obiectului Remove spreadsheet - Remove spreadsheet + Elimină foaia de calcul Attach spreadsheet - Attach spreadsheet + Atașează foaie de calcul Import CSV File - Import CSV File + Importă fișierul CSV Export CSV File - Export CSV File + Exportă fișierul CSV Unable to recognize that file type - Unable to recognize that file type + Imposibil de recunoscut acest tip de fișier @@ -3141,7 +3140,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Schedule - Schedule + Programare @@ -3152,37 +3151,37 @@ Floor object is not allowed to accept Site, Building, or Floor objects. Site, Building, and Floor objects will be removed from the selection. You can change that in the preferences. - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. + Poti pune orice in afara de urmatoarele obiecte: site, cladiri si podea - intr-un obiect de podea. -Floor object is not allowed to accept Site, Building, or Floor objects. +Obiectul etajului nu are permisiunea de a accepta Site, Clădiri sau obiecte etaj. -Site, Building, and Floor objects will be removed from the selection. +Site, Clădiri și obiecte etaj vor fi eliminate din selecție. -You can change that in the preferences. +Puteți schimba asta în preferințe. There is no valid object in the selection. Floor creation aborted. - There is no valid object in the selection. + Nu există nici un obiect valid în selecţie. -Floor creation aborted. +Crearea etajelor a fost întreruptă. Create Floor - Create Floor + Crează etaj Create Axis - Create Axis + Creează axă Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Distanţe (mm) şi unghiuri (grade) între axe @@ -3208,27 +3207,27 @@ Floor creation aborted. Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + S-a găsit o formă care conține curbe, triangulare Successfully imported - Successfully imported + Importat cu succes Error computing the shape of this object - Error computing the shape of this object + Eroare la calcularea formei acestui obiect has no solid - has no solid + nu are solid has an invalid shape - has an invalid shape + are o formă invalidă @@ -3239,43 +3238,43 @@ Floor creation aborted. has a null shape - has a null shape + are o formă nulă Toggle subcomponents - Toggle subcomponents + Comutare subcomponente Closing Sketch edit - Closing Sketch edit + Închide editarea schiței Component - Component + Componentă Components of this object - Components of this object + Componentele acestui obiect Base component - Base component + Componentă de bază Additions - Additions + Adăugări Subtractions - Subtractions + Scăderi @@ -3285,7 +3284,7 @@ Floor creation aborted. Fixtures - Fixtures + Reparații @@ -3300,7 +3299,7 @@ Floor creation aborted. Edit IFC properties - Edit IFC properties + Editează proprietăți IFC @@ -3576,7 +3575,7 @@ Building creation aborted. Flip direction - Flip direction + Întoarce direcția @@ -6094,7 +6093,7 @@ Building creation aborted. Roof - Roof + Acoperiș @@ -6146,7 +6145,7 @@ Building creation aborted. Frame - Frame + Cadru @@ -6419,7 +6418,7 @@ Building creation aborted. Curtain Wall - Curtain Wall + Perete de cortină @@ -6467,7 +6466,7 @@ Building creation aborted. Schedule - Schedule + Programare @@ -6480,7 +6479,7 @@ Building creation aborted. Level - Level + Nivel @@ -6710,7 +6709,7 @@ Building creation aborted. Component - Component + Componentă @@ -6749,7 +6748,7 @@ Building creation aborted. Toggle subcomponents - Toggle subcomponents + Comutare subcomponente diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 01c41a67ae..09e314b117 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -277,7 +277,7 @@ Leave blank to use all objects from the document If this is enabled, additional lines will be filled with each object considered. If not, only the totals. - If this is enabled, additional lines will be filled with each object considered. If not, only the totals. + Если эта функция включена, дополнительные строки будут заполнены каждым рассматриваемым объектом. Если нет, то только итоги. @@ -287,7 +287,7 @@ Leave blank to use all objects from the document If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. + Если этот параметр включен, расписание и связанная с ним электронная таблица обновляются всякий раз, когда документ пересчитывается. @@ -2923,7 +2923,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Panel options - Panel options + Настройки Панели @@ -3056,12 +3056,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela removed property 'Result', and added property 'AutoUpdate' - removed property 'Result', and added property 'AutoUpdate' + удалено свойство "Результат" и добавлено свойство "Автообновление" added property 'Schedule' - added property 'Schedule' + добавлено свойство «Расписание» @@ -3071,7 +3071,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + Удалить электронную таблицу @@ -5357,12 +5357,12 @@ Building creation aborted. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed + Если да, то расписание и связанная с ним таблица обновляются всякий раз, когда документ пересчитывается The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Расписание Arch, в котором используется эта таблица diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts index 06f972f7dc..07305641f4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts @@ -3095,7 +3095,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + Ukloni tabelu diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 135a04b404..4b922b907a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -3095,7 +3095,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Remove spreadsheet - Remove spreadsheet + Уклони табелу diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index b68b83881a..cee9024772 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -185,7 +185,7 @@ Comment - 評論 + 註釋 @@ -2112,7 +2112,7 @@ unit to work with when opening the file. Profile - 外觀 + 輪廓特徵 @@ -2262,7 +2262,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Front - 前視圖 + 正視圖 @@ -6071,7 +6071,7 @@ Building creation aborted. Profile - 外觀 + 輪廓特徵 @@ -6435,7 +6435,7 @@ Building creation aborted. Pipe - 管 + 貫穿 diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 5ccab49db4..8f38c88570 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Manažer vrstev @@ -1704,7 +1704,7 @@ such as "Arial:Bold" By leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit. - By leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit. + Pokud toto pole ponecháte prázdné, rozměry rozměrů se zobrazí v aktuálních jednotkách definovaných ve FreeCADu. Zadáním jednotky, jako je m nebo cm, můžete vynutit zobrazení nových rozměrů v této jednotce. @@ -1734,7 +1734,7 @@ such as "Arial:Bold" Method chosen for importing SVG object color to FreeCAD - Method chosen for importing SVG object color to FreeCAD + Zvolená metoda pro import barvy objektu SVG do FreeCADu @@ -1755,8 +1755,8 @@ such as "Arial:Bold" If checked, no units conversion will occur. One unit in the SVG file will translate as one millimeter. - If checked, no units conversion will occur. -One unit in the SVG file will translate as one millimeter. + Pokud je zaškrtnuto, neproběhne žádná konverze jednotek. +Jedna jednotka v souboru SVG se přeloží jako jeden milimetr. @@ -1786,7 +1786,7 @@ One unit in the SVG file will translate as one millimeter. All white lines will appear in black in the SVG for better readability against white backgrounds - All white lines will appear in black in the SVG for better readability against white backgrounds + Všechny bílé čáry se v SVG zobrazí černě pro lepší čitelnost na bílém pozadí diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index f8deb3bf97..506d51cc29 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Ebenen-Manager @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Ein-/Ausschalten Isolate - Isolate + Isolieren @@ -2858,7 +2858,7 @@ This might fail for post DXF R12 templates. Check this to lock the current angle - Check this to lock the current angle + Aktivieren, um den aktuellen Winkel zu sperren @@ -2876,15 +2876,14 @@ This might fail for post DXF R12 templates. Coordinates relative to last point or to coordinate system origin if is the first point to set - Coordinates relative to last point or to coordinate system origin -if is the first point to set + Koordinaten relativ zum letzten Punkt oder zum Koordinatenursprung, wenn das der erste zu setzende Punkt ist Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - Coordinates relative to global coordinate system. -Uncheck to use working plane coordinate system + Koordinaten relativ zum globalen Koordinatensystem. +Deaktivieren um das Koordinatensystem der aktuellen Arbeitsebene zu verwenden @@ -2895,8 +2894,8 @@ Uncheck to use working plane coordinate system Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled - Check this if the object should appear as filled, otherwise it will appear as wireframe. -Not available if Draft preference option 'Use Part Primitives' is enabled + Aktivieren Sie diese Option, wenn das Objekt als gefüllt angezeigt werden soll, sonst wird es als Drahtgitter angezeigt. +Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist @@ -2906,22 +2905,22 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Finishes the current drawing or editing operation - Finishes the current drawing or editing operation + Beendet die aktuelle Zeichen- oder Bearbeitungsoperation If checked, command will not finish until you press the command button again - If checked, command will not finish until you press the command button again + Wenn aktiviert, wird der Befehl nicht beendet, bis Sie den Befehl erneut drücken If checked, an OCC-style offset will be performed instead of the classic offset - If checked, an OCC-style offset will be performed instead of the classic offset + Wenn aktiviert, wird anstelle des klassischen Offsets ein OCC-Offset ausgeführt &OCC-style offset - &OCC-style offset + OCC Versatz @@ -2936,12 +2935,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Finishes and closes the current line - Finishes and closes the current line + Beendet und schliesst die aktuelle Linie Wipes the existing segments of this line and starts again from the last point - Wipes the existing segments of this line and starts again from the last point + Löscht die vorhandenen Segmente dieser Linie und beginnt erneut vom letzten Punkt @@ -2951,12 +2950,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Reorients the working plane on the last segment - Reorients the working plane on the last segment + Orientiert die Arbeitsebene am letzten Segment neu Selects an existing edge to be measured by this dimension - Selects an existing edge to be measured by this dimension + Wählt eine vorhandene Kante aus, die von dieser Dimension aus gemessen werden soll @@ -2971,7 +2970,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands + Falls Aktiviert, werden Objekte kopiert anstatt verschoben. Einstellungen -> Draft -> Globaler Kopiermodus, um diesen Modus in den nächsten Befehlen beizubehalten @@ -2981,7 +2980,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled If checked, subelements will be modified instead of entire objects - If checked, subelements will be modified instead of entire objects + Wenn aktiviert, werden Unterelemente anstelle von ganzen Objekten geändert @@ -2991,7 +2990,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Press this button to create the text object, or finish your text with two blank lines - Press this button to create the text object, or finish your text with two blank lines + Drücken Sie diese Schaltfläche, um das Textobjekt zu erstellen, oder beenden Sie Ihren Text mit zwei leeren Zeilen @@ -3005,7 +3004,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Change default style for new objects - Change default style for new objects + Standardstil für neue Objekte ändern @@ -3058,7 +3057,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Labeltyp @@ -3081,7 +3080,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Offset distance - Offset distance + Versatzabstand @@ -3091,17 +3090,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Local u0394X - Local u0394X + Lokal u0394X Local u0394Y - Local u0394Y + Lokal u0394Y Local u0394Z - Local u0394Z + Lokal u0394Z @@ -3121,17 +3120,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Global u0394X - Global u0394X + Global u0394X Global u0394Y - Global u0394Y + Global u0394Y Global u0394Z - Global u0394Z + Global u0394Z @@ -3171,7 +3170,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Facebinder elements - Facebinder elements + Flächen-Verbund-Elemente @@ -3200,22 +3199,21 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Fehler bei der DWG-Umwandlung. +Versuchen Sie, die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-englische Zeichen zu verschieben oder versuchen Sie, in einer niedrigeren DWG-Version zu speichern. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Es wurde kein passender DWG-Konverter gefunden. +Bitte wählen Sie einen manuell im Menü Bearbeiten -> Einstellungen -> Import/Export -> DWG ODA File Converter not found - ODA File Converter not found + ODA File Converter nicht gefunden @@ -3266,22 +3264,22 @@ To enabled FreeCAD to download these libraries, answer Yes. Unable to convert input into a scale factor - Unable to convert input into a scale factor + Eingabe kann nicht in einen Skalierungsfaktor konvertiert werden Set custom scale - Set custom scale + Benutzerdefinierter Maßstab festlegen Set custom annotation scale in format x:x, x=x - Set custom annotation scale in format x:x, x=x + Legen Sie den benutzerdefinierte Anmerkungs Massstab im Format x:x, x=x fest Set the scale used by draft annotation tools - Set the scale used by draft annotation tools + Maßstab für Entwurfsmitteilungswerkzeuge festlegen @@ -3330,12 +3328,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Unable to insert new object into a scaled part - Unable to insert new object into a scaled part + Kann kein neues Objekt in einen skaliertes Teil einfügen Symbol not implemented. Using a default symbol. - Symbol not implemented. Using a default symbol. + Symbol nicht implementiert. Ein Standardsymbol wird verwendet. @@ -3350,17 +3348,17 @@ To enabled FreeCAD to download these libraries, answer Yes. filename does not exist on the system or in the resource file - filename does not exist on the system or in the resource file + Dateiname existiert nicht auf dem System oder in der Ressourcendatei unable to load texture - unable to load texture + Textur kann nicht geladen werden Does not have 'ViewObject.RootNode'. - Does not have 'ViewObject.RootNode'. + Hat keinen 'ViewObject.RootNode'. @@ -3375,7 +3373,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Wires: - Wires: + Kantenzüge: @@ -3406,63 +3404,63 @@ To enabled FreeCAD to download these libraries, answer Yes. Objects have different placements. Distance between the two base points: - Objects have different placements. Distance between the two base points: + Objekte haben unterschiedliche Platzierungen. Abstand zwischen den beiden Basispunkten: has a different value - has a different value + hat einen anderen Wert doesn't exist in one of the objects - doesn't exist in one of the objects + existiert nicht in einem der Objekte %s shares a base with %d other objects. Please check if you want to modify this. - %s shares a base with %d other objects. Please check if you want to modify this. + %s teilt eine Basis mit %d anderen Objekten. Bitte überprüfen Sie, ob Sie dies ändern möchten. %s cannot be modified because its placement is readonly. - %s cannot be modified because its placement is readonly. + %s kann nicht geändert werden, da seine Platzierung schreibgeschützt ist. Wrong input: unknown document. - Wrong input: unknown document. + Falsche Eingabe: unbekanntes Dokument. This function will be deprecated in - This function will be deprecated in + Diese Funktion wird veraltet sein in Please use - Please use + Verwenden Sie This function will be deprecated. - This function will be deprecated. + Diese Funktion wird veraltet sein. Pick a face, 3 vertices or a WP Proxy to define the drawing plane - Pick a face, 3 vertices or a WP Proxy to define the drawing plane + Wähle eine Fläche, 3 Punkte oder einen WP Proxy um die Zeichenebene zu definieren Working plane aligned to global placement of - Working plane aligned to global placement of + Arbeitsebene ausgerichtet an der globalen Platzierung von Dir - Dir + Richtung @@ -3489,7 +3487,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick endpoint of leader line - Pick endpoint of leader line + Wählen Sie den End-Punkt der Führungslinie @@ -3513,7 +3511,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Create Wire - Create Wire + Erzeuge Kante @@ -3531,17 +3529,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Unable to create a Wire from selected objects - Unable to create a Wire from selected objects + Es kann kein Kantenzug von den ausgewählten Objekten erstellt werden Convert to Wire - Convert to Wire + Umwandlung in Kantenzug Select an object to join - Select an object to join + Wähle ein Objekt zum Verbinden aus @@ -3556,7 +3554,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - Pick location point + Wähle Position @@ -4191,12 +4189,12 @@ The final angle will be the base angle plus this amount. This object type cannot be scaled directly. Please use the clone method. - This object type cannot be scaled directly. Please use the clone method. + Dieser Objekttyp kann nicht direkt skaliert werden. Bitte verwenden Sie die Klon-Methode. Pick new distance from base point - Pick new distance from base point + Neuen Abstand zum Basispunkt auswählen @@ -4218,7 +4216,7 @@ The final angle will be the base angle plus this amount. No active Draft Toolbar. - No active Draft Toolbar. + Keine aktive Entwurfs-Symbolleiste. @@ -4228,7 +4226,7 @@ The final angle will be the base angle plus this amount. Continue mode - Continue mode + Fortfahren Modus @@ -4261,32 +4259,32 @@ The final angle will be the base angle plus this amount. Select an object to stretch - Select an object to stretch + Wählen Sie ein zu streckendes Objekt aus Pick first point of selection rectangle - Pick first point of selection rectangle + Wählen Sie den ersten Punkt der Rechteck Auswahl Pick opposite point of selection rectangle - Pick opposite point of selection rectangle + Wählen Sie den gegenüberliegenden Punkt des Auswahlrechtecks Pick start point of displacement - Pick start point of displacement + Startpunkt der Verschiebung auswählen Pick end point of displacement - Pick end point of displacement + Endpunkt der Verschiebung auswählen Turning one Rectangle into a Wire - Turning one Rectangle into a Wire + Verwandle ein Rechteck in Kantenzug @@ -4306,23 +4304,23 @@ The final angle will be the base angle plus this amount. Select an object to mirror - Select an object to mirror + Wählen Sie ein Objekt zum Spiegeln Pick start point of mirror line - Pick start point of mirror line + Startpunkt der Spiegellinie auswählen Mirror - Mirror + Spiegeln Pick end point of mirror line - Pick end point of mirror line + Endpunkt der Spiegellinie auswählen @@ -4332,7 +4330,7 @@ The final angle will be the base angle plus this amount. Select an object to clone - Select an object to clone + Wählen Sie ein Objekt zum Klonen aus @@ -4353,22 +4351,22 @@ The final angle will be the base angle plus this amount. Select an object to offset - Select an object to offset + Objekt zum Versetzen auswählen Offset only works on one object at a time. - Offset only works on one object at a time. + Versetzen funktioniert nur an einem Objekt nach dem anderen. Cannot offset this object type - Cannot offset this object type + Kann diesen Objekttyp nicht versetzen Offset of Bezier curves is currently not supported - Offset of Bezier curves is currently not supported + Versatz von Bezierkurven wird derzeit nicht unterstützt @@ -4378,7 +4376,7 @@ The final angle will be the base angle plus this amount. Pick ShapeString location point - Pick ShapeString location point + Position für Textform wählen @@ -4388,7 +4386,7 @@ The final angle will be the base angle plus this amount. Heal - Heal + Heilen @@ -4410,7 +4408,7 @@ The final angle will be the base angle plus this amount. Task panel: - Task panel: + Taskleiste: @@ -4425,7 +4423,7 @@ The final angle will be the base angle plus this amount. At least one element must be selected. - At least one element must be selected. + Es muss mindestens ein Element ausgewählt werden. @@ -4447,30 +4445,30 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 2. - Number of elements must be at least 2. + Anzahl der Elemente muss mindestens 2 sein. The angle is above 360 degrees. It is set to this value to proceed. - The angle is above 360 degrees. It is set to this value to proceed. + Der Winkel liegt über 360 Grad. Dieser Wert wird gesetzt, um fortzufahren. The angle is below -360 degrees. It is set to this value to proceed. - The angle is below -360 degrees. It is set to this value to proceed. + Der Winkel liegt unter -360 Grad. Dieser Wert wird gesetzt, um fortzufahren. Center reset: - Center reset: + Zentrieren: Fuse: - Fuse: + Verschmelzen: @@ -4514,22 +4512,22 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - Number of elements must be at least 1. + Anzahl der Elemente muss mindestens 1 sein. Interval X reset: - Interval X reset: + X-Reset Intervall: Interval Y reset: - Interval Y reset: + Y-Reset Intervall: Interval Z reset: - Interval Z reset: + Z-Reset Intervall: @@ -4583,7 +4581,7 @@ The final angle will be the base angle plus this amount. Number of layers must be at least 2. - Number of layers must be at least 2. + Anzahl der Ebenen muss mindestens 2 sein. @@ -4593,17 +4591,17 @@ The final angle will be the base angle plus this amount. Radial distance is negative. It is made positive to proceed. - Radial distance is negative. It is made positive to proceed. + Der radiale Abstand ist negativ. Er wird positiv gemacht, um fortzufahren. Tangential distance cannot be zero. - Tangential distance cannot be zero. + Die Tangentialdistanz darf nicht Null sein. Tangential distance is negative. It is made positive to proceed. - Tangential distance is negative. It is made positive to proceed. + Die Tangentialdistanz ist negativ. Sie wird positiv gemacht, fortzufahren. @@ -4628,72 +4626,72 @@ The final angle will be the base angle plus this amount. ShapeString: string has no wires - ShapeString: string has no wires + ShapeString: Die Zeichenfolge hat keine Linien added view property 'ScaleMultiplier' - added view property 'ScaleMultiplier' + hinzugefügte Ansichtseigenschaft 'ScaleMultiplier' added view property 'AnnotationStyle' - added view property 'AnnotationStyle' + hinzugefügte Ansichtseigenschaft 'AnnotationStyle' , path object doesn't have 'Edges'. - , path object doesn't have 'Edges'. + , pfad-Objekt hat keine 'Kanten'. 'PathObj' property will be migrated to 'PathObject' - 'PathObj' property will be migrated to 'PathObject' + 'PathObj' Eigenschaft wird nach 'PathObject' migriert Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Start Offset zu groß für die Pfadlänge. Verwende stattdessen Null. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + End-Offset ist zu groß für die Pfadlänge minus Start-Offset. Verwende stattdessen Null. Length of tangent vector is zero. Copy not aligned. - Length of tangent vector is zero. Copy not aligned. + Länge des Tangent-Vektors ist Null. Kopie nicht ausgerichtet. Length of normal vector is zero. Using a default axis instead. - Length of normal vector is zero. Using a default axis instead. + Die Länge des normalen Vektors ist Null. Verwende stattdessen eine Standardachse. Tangent and normal vectors are parallel. Normal replaced by a default axis. - Tangent and normal vectors are parallel. Normal replaced by a default axis. + Tangente und normale Vektoren sind parallel. Normal ersetzt durch eine Standardachse. Cannot calculate normal vector. Using the default normal instead. - Cannot calculate normal vector. Using the default normal instead. + Kann den normalen Vektor nicht berechnen. Verwende stattdessen die Standardeinstellung. AlignMode {} is not implemented - AlignMode {} is not implemented + AlignMode {} ist nicht implementiert added property 'ExtraPlacement' - added property 'ExtraPlacement' + hinzugefügte Eigenschaft 'ExtraPlacement' @@ -4703,7 +4701,7 @@ The final angle will be the base angle plus this amount. All Shapes must be planar - All Shapes must be planar + Alle Formen müssen eben sein @@ -4813,7 +4811,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number. - Wrong input: must be a number. + Falsche Eingabe: muss eine Zahl sein. @@ -4832,7 +4830,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a vector. - Wrong input: must be a vector. + Falsche Eingabe: muss ein Vektor sein. @@ -4853,21 +4851,21 @@ The final angle will be the base angle plus this amount. Wrong input: must be a number or vector. - Wrong input: must be a number or vector. + Falsche Eingabe: muss eine Zahl oder ein Vektor sein. Input: single value expanded to vector. - Input: single value expanded to vector. + Eingabe: Einzelwert auf Vektor erweitert. Wrong input: must be an integer number. - Wrong input: must be an integer number. + Falsche Eingabe: muss eine Ganzzahl sein. @@ -4902,7 +4900,7 @@ The final angle will be the base angle plus this amount. Wrong input: object must not be a list. - Wrong input: object must not be a list. + Falsche Eingabe: Objekt darf keine Liste sein. @@ -4912,12 +4910,12 @@ The final angle will be the base angle plus this amount. Wrong input: label_type must be a string. - Wrong input: label_type must be a string. + Falsche Eingabe: label_type muss eine Zeichenkette sein. Wrong input: label_type must be one of the following: - Wrong input: label_type must be one of the following: + Falsche Eingabe: label_type muss einer der folgenden sein: @@ -4925,7 +4923,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of strings or a single string. - Wrong input: must be a list of strings or a single string. + Falsche Eingabe: muss eine Liste von Zeichenketten oder eine einzelne Zeichenkette sein. @@ -4936,7 +4934,7 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of at least two vectors. - Wrong input: must be a list of at least two vectors. + Falsche Eingabe: muss eine Liste von mindestens zwei Vektoren sein. @@ -4951,7 +4949,7 @@ The final angle will be the base angle plus this amount. Wrong input: object has the wrong type. - Wrong input: object has the wrong type. + Falsche Eingabe: Objekt hat den falschen Typ. @@ -4978,18 +4976,18 @@ The final angle will be the base angle plus this amount. Wrong input: must be an integer. - Wrong input: must be an integer. + Falsche Eingabe: muss eine Ganzzahl sein. i1: values below 1 are not allowed; will be set to 1. - i1: values below 1 are not allowed; will be set to 1. + i1: Werte unter 1 sind nicht erlaubt; werden auf 1 gesetzt. Wrong input: vertex not in object. - Wrong input: vertex not in object. + Falsche Eingabe: Kein Scheitelpunkt im Objekt. @@ -5026,12 +5024,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list with two angles. - Wrong input: must be a list with two angles. + Falsche Eingabe: muss eine Liste mit zwei Winkeln sein. Wrong input: must be a number or quantity. - Wrong input: must be a number or quantity. + Falsche Eingabe: muss eine Zahl oder eine Menge sein. @@ -5041,7 +5039,7 @@ The final angle will be the base angle plus this amount. Wrong input: it must be a string. - Wrong input: it must be a string. + Falsche Eingabe: Es muss eine Zeichenkette sein. @@ -5211,58 +5209,58 @@ The final angle will be the base angle plus this amount. Found object with several coplanar faces: refine them - Found object with several coplanar faces: refine them + Objekt mit mehreren koplanaren Flächen gefunden: verfeinern Found 1 non-parametric objects: draftifying it - Found 1 non-parametric objects: draftifying it + 1 nicht parametrisches Objekt gefunden: Erzeuge ein parametrisches Objekt Found 1 closed sketch object: creating a face from it - Found 1 closed sketch object: creating a face from it + 1 geschlossenes Skizzen-Objekt gefunden: Erstelle daraus eine Fläche Found closed wires: creating faces - Found closed wires: creating faces + Geschlossene Kantenzüge gefunden: Erstelle Fläche(n) Found several wires or edges: wiring them - Found several wires or edges: wiring them + Mehrere Kanten gefunden: Verbinde sie Found several non-treatable objects: creating compound - Found several non-treatable objects: creating compound + Mehrere nicht behandelbare Objekte gefunden: Erstellen eines Verbundobjektes trying: closing it - trying: closing it + versuche: schließen Found 1 open wire: closing it - Found 1 open wire: closing it + 1 offener Kantenzug gefunden: Wird geschlossen Found 1 object: draftifying it - Found 1 object: draftifying it + 1 Objekt gefunden: Entwickeln Found points: creating compound - Found points: creating compound + Punkte gefunden: Erstelle Verbundobjekt Unable to upgrade these objects. - Unable to upgrade these objects. + Diese Objekte konnten nicht aktualisiert werden @@ -5272,7 +5270,7 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - added view property 'TextColor' + hinzugefügte Ansichtseigenschaft 'ScaleMultiplier' @@ -5312,7 +5310,7 @@ The final angle will be the base angle plus this amount. Draft annotation tools - Draft annotation tools + Werkzeuge zur Beschriftung von Entwürfen @@ -5322,13 +5320,13 @@ The final angle will be the base angle plus this amount. Draft utility tools - Draft utility tools + Entwurfswerkzeuge Draft snap - Draft snap + Entwurfs-Einrastung @@ -5348,7 +5346,7 @@ The final angle will be the base angle plus this amount. &Utilities - &Utilities + &Werkzeuge @@ -5390,14 +5388,14 @@ The final angle will be the base angle plus this amount. Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager - Download of dxf libraries failed. -Please install the dxf Library addon manually -from menu Tools -> Addon Manager + Download der dxf Bibliotheken fehlgeschlagen. +Bitte installieren Sie das dxf Library Addon manuell +aus dem Menü Extras -> Addon Manager You must choose a base object before using this command - You must choose a base object before using this command + Sie müssen ein Basisobjekt auswählen, bevor Sie diesen Befehl verwenden können @@ -5432,7 +5430,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Fehler: json-Modul nicht gefunden. Stil konnte nicht gespeichert werden @@ -5537,7 +5535,7 @@ from menu Tools -> Addon Manager On - On + Ein @@ -5562,7 +5560,7 @@ from menu Tools -> Addon Manager Face color - Face color + Flächenfarbe @@ -5572,12 +5570,12 @@ from menu Tools -> Addon Manager Line print color - Line print color + Ausgabe-Farbe New Layer - New Layer + Neue Ebene @@ -6682,7 +6680,7 @@ then draw a line to specify the distance and direction of stretching. Mirror - Mirror + Spiegeln @@ -6852,7 +6850,7 @@ Die geschlossenen Formen können für Extrusionen und boolesche Operationen verw Heal - Heal + Heilen @@ -7282,12 +7280,12 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Länge vom Anfang des Pfades zur ersten Kopie. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Länge vom Ende des Pfades bis zur letzten Kopie. @@ -8082,12 +8080,12 @@ beyond the dimension line Manage layers... - Manage layers... + Ebenen verwalten... Set/modify the different layers of this document - Set/modify the different layers of this document + Ebenen dieses Dokuments einstellen/ändern diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index 289ed22bc8..beb02cd9cc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Gestor de capas @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Encender/apagar Isolate - Isolate + Aislar @@ -3060,7 +3060,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Tipo de rótulo @@ -5539,7 +5539,7 @@ from menu Tools -> Addon Manager On - On + Activado @@ -5564,7 +5564,7 @@ from menu Tools -> Addon Manager Face color - Face color + Color de cara @@ -5579,7 +5579,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Nueva capa @@ -8087,12 +8087,12 @@ beyond the dimension line Manage layers... - Manage layers... + Administrar capas... Set/modify the different layers of this document - Set/modify the different layers of this document + Establecer/modificar las diferentes capas de este documento diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 8a8d3c0dc1..b01cf76133 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Gestor de capas @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Encender/apagar Isolate - Isolate + Aislar @@ -3061,7 +3061,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Tipo de rótulo @@ -5540,7 +5540,7 @@ from menu Tools -> Addon Manager On - On + Activado @@ -5565,7 +5565,7 @@ from menu Tools -> Addon Manager Face color - Face color + Color de cara @@ -5580,7 +5580,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Nueva capa @@ -8088,12 +8088,12 @@ beyond the dimension line Manage layers... - Manage layers... + Administrar capas... Set/modify the different layers of this document - Set/modify the different layers of this document + Establecer/modificar las diferentes capas de este documento diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index 952de44663..aa7a83f8da 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Geruzen kudeatzailea @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Aktibatu/desaktibatu Isolate - Isolate + Isolatu @@ -3051,7 +3051,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Label type - Label type + Etiketa mota @@ -3193,16 +3193,16 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Errorea DWGa bihurtzean. +Saiatu DWG fitxategia zuriunerik gabeko eta ingelesezkoak ez diren karaktererik gabeko +direktorio-bide batera, edo saiatu DGW bertsio zaharrago batean gordetzen. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Ez da aurkitu DWG bihurtzaile egokirik. +Ezarri bat eskuz 'Editatu -> Hobespenak -> Inportatu/esportatu -> DWG' atalean @@ -4648,12 +4648,12 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Hasierako desplazamendua luzeegia da bidearen luzerarako. Zero erabiliko da horren ordez. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Amaierako desplazamendua luzeegia da bidearen luzera ken hasierako desplazamendurako. Zero erabiliko da horren ordez. @@ -5530,7 +5530,7 @@ Instalatu DXF liburutegiaren gehigarria eskuz On - On + Aktibatua @@ -5555,7 +5555,7 @@ Instalatu DXF liburutegiaren gehigarria eskuz Face color - Face color + Aurpegiaren kolorea @@ -5565,12 +5565,12 @@ Instalatu DXF liburutegiaren gehigarria eskuz Line print color - Line print color + Lerroaren inprimatze-kolorea New Layer - New Layer + Geruza berria @@ -6361,7 +6361,7 @@ Ctrl atxikitzeko, Shift uneko segmentura edo normalera murrizteko, Alt alderantz B-spline - B-Spline + B-spline kurba @@ -7279,12 +7279,12 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Bidearen hasieratik lehenengo kopiarainoko distantzia. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Bidearen bukaeratik azkeneko kopiarainoko distantzia. @@ -8078,12 +8078,12 @@ haratago duen luzera Manage layers... - Manage layers... + Geruzak kudeatu... Set/modify the different layers of this document - Set/modify the different layers of this document + Dokumentu honen geruza ezberdinak ezarri/aldatu diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index e166ab872f..ae995cff32 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Gestionnaire de calques @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Activer/désactiver Isolate - Isolate + Isoler @@ -3061,7 +3061,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Type d'étiquette @@ -3203,16 +3203,15 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Erreur lors de la conversion en DWG. +Essayez de déplacer le fichier DWG vers un chemin de répertoire sans espaces ni caractères non-anglophones, ou essayez de sauvegarder vers une version inférieure de DWG. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Aucun convertisseur DWG approprié n'a été trouvé. +Veuillez en définir un manuellement dans le menu Edition -> Préférences -> Import/Export -> DWG @@ -4655,12 +4654,12 @@ L'angle final sera l'angle de base plus cette quantité. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Décalage de début trop grand pour la longueur du chemin. Utilisation de zéro à la place. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Décalage de fin trop grand pour la longueur du chemin moins le décalage de démarrage. En utilisant zéro à la place. @@ -5536,7 +5535,7 @@ Installer l’extension de la bibliothèque dxf manuellement depuis le menu Outi On - On + Activé @@ -5561,7 +5560,7 @@ Installer l’extension de la bibliothèque dxf manuellement depuis le menu Outi Face color - Face color + Couleur de la face @@ -5571,12 +5570,12 @@ Installer l’extension de la bibliothèque dxf manuellement depuis le menu Outi Line print color - Line print color + Couleur d'impression de la ligne New Layer - New Layer + Nouveau calque @@ -5853,12 +5852,12 @@ Cependant, une seule esquisse avec des traces déconnectées sera convertie en p Snap Endpoint - Aimanter à la terminaison + Aimanter aux extrémités Snaps to the endpoints of edges. - Aimante aux terminaisons des arêtes. + Aimante aux extrémités des arêtes. @@ -5897,7 +5896,7 @@ Cependant, une seule esquisse avec des traces déconnectées sera convertie en p Snaps to an imaginary line that extends beyond the endpoints of straight edges. - Aimante à une ligne imaginaire qui s'étend au-delà des terminaisons des arêtes rectilignes. + Aimante à une ligne imaginaire qui s'étend au-delà des extrémités des arêtes rectilignes. @@ -7281,12 +7280,12 @@ Pour obtenir de meilleurs résultats avec "Original" ou "Tangent", vous devrez p Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Longueur depuis le démarrage du chemin jusqu'à la première copie. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Longueur depuis le démarrage du chemin jusqu'à la première copie. @@ -8079,12 +8078,12 @@ au-delà de la ligne de la dimension Manage layers... - Manage layers... + Gérer les calques... Set/modify the different layers of this document - Set/modify the different layers of this document + Définir/modifier les différentes couches de votre projet BIM diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 61057839c4..431355960f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Rétegkezelő @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Be/Ki kapcsolás Isolate - Isolate + Elszigetel @@ -3067,7 +3067,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Label type - Label type + Címke típus @@ -3209,16 +3209,16 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Hiba történt a DWG konverzió során. +Próbáld meg áthelyezni a DWG fájlt szóközök és nem angol karakterek nélküli könyvtár elérési útra, +vagy próbáld meg alacsonyabb DWG verzióra menteni. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Nem találtunk megfelelő DWG átalakítót. +Kérjük, állíts be egyet kézzel a Szerkesztés -> Beállítások -> Import/Export -> DWG menüben @@ -4664,12 +4664,12 @@ A végső szög lesz az alapszög plusz ennek összege. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Eltolás kezdete túl nagy az útvonal hosszához képest. Helyette nullát használjunk. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Eltolás vége túl nagy az útvonal hossza mínusz Eltolás kezdete. Helyette nullát használjunk. @@ -5546,7 +5546,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből On - On + Be @@ -5571,7 +5571,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Face color - Face color + Felület színe @@ -5581,12 +5581,12 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Line print color - Line print color + Vonal nyomtatási szín New Layer - New Layer + Új réteg @@ -7292,12 +7292,12 @@ Az 'Eredeti' vagy a 'Érintő' jobb eredmény eléréséhez előfordulhat, hogy Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Az útvonal kezdetétől az első másolatig terjedő hossz. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Az útvonal végétől az utolsó másolatig terjedő hossz. @@ -8090,12 +8090,12 @@ a méretvonalon túl Manage layers... - Manage layers... + Rétegek kezelése... Set/modify the different layers of this document - Set/modify the different layers of this document + A dokumentum különböző rétegeinek beállítása/módosítása diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index e9ba6c1392..b1055ddaf9 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -16,7 +16,7 @@ The name of your style. Existing style names can be edited. - The name of your style. Existing style names can be edited. + Nama gaya Anda. Nama gaya yang ada dapat diedit. @@ -39,19 +39,55 @@ Hapus item yang dipilih + + Layers manager + Layers manager + + + + New + Baru + + + Delete Menghapus + + + Select all + Pilih Semua + + + + Toggle on/off + Toggle on/off + + + + Isolate + Isolate + + + + Cancel + Membatalkan + + + + OK + Baik + Import styles from json file - Import styles from json file + Impor gaya dari file json Export styles to json file - Export styles to json file + Ekspor gaya ke file json @@ -72,195 +108,207 @@ - Font size in the system units - Font size in the system units + The font size in system units + The font size in system units + + + + + The line spacing (relative to the font size) + The line spacing (relative to the font size) + + + + Lines and arrows + Lines and arrows + + + + Show line + Show line + + + + + The width of the lines + The width of the lines + + + + px + px + + + + + The type of arrows or markers to use for dimensions and labels + The type of arrows or markers to use for dimensions and labels + + + + + The size of the arrows or markers in system units + The size of the arrows or markers in system units + + + + + The color of lines and arrows + The color of lines and arrows + + + + Line and arrow color + Line and arrow color + + + + + The distance the dimension line is additionally extended + The distance the dimension line is additionally extended + + + + + The distance the extension lines are additionally extended beyond the dimension line + The distance the extension lines are additionally extended beyond the dimension line Font size Ukuran huruf - - - Line spacing in system units - Line spacing in system units - Line spacing Jarak baris + + + + The color of texts, dimension texts and label texts + The color of texts, dimension texts and label texts + + Text color + Text color + + + Units Unit - - + + A multiplier factor that affects the size of texts and markers - A multiplier factor that affects the size of texts and markers + Faktor pengali yang memengaruhi ukuran teks dan penanda - + Scale multiplier Pengganda skala - - + + If it is checked it will show the unit next to the dimension value - If it is checked it will show the unit next to the dimension value + Jika dicentang maka akan menampilkan satuan di sebelah nilai dimensi - + Show unit Tampilkan satuan - - + + Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit - Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit + Tentukan satuan panjang yang valid seperti mm, m, in, ft, untuk memaksa menampilkan nilai dimensi dalam satuan ini - + Unit override Penggantian unit - - + + The number of decimals to show for dimension values - The number of decimals to show for dimension values + Jumlah desimal yang akan ditampilkan untuk nilai dimensi - + Decimals Desimal - - Line and arrows - Garis dan Panah - - - - + + If it is checked it will display the dimension line - If it is checked it will display the dimension line + Jika dicentang maka akan menampilkan garis dimensi - - Show lines - Tampilkan baris - - - - - The width of the dimension lines - The width of the dimension lines - - - + Line width Lebar garis - - px - px - - - - - The color of dimension lines, arrows and texts - The color of dimension lines, arrows and texts - - - - Line / text color - Line / text color - - - - - The type of arrows or markers to use at the end of dimension lines - The type of arrows or markers to use at the end of dimension lines - - - + Arrow type Jenis Panah - + Dot Dot - + Circle Lingkaran - + Arrow Panah - + Tick - Tick + Centang - + Tick-2 - Tick-2 + Centang-2 - - - The size of the dimension arrows or markers in system units - The size of the dimension arrows or markers in system units - - - + Arrow size Panah ukuran - - - The distance that the dimension line is additionally extended - The distance that the dimension line is additionally extended - - - + Dimension overshoot - Dimension overshoot + Overshoot dimensi - - + + The length of the extension lines - The length of the extension lines + Panjang garis ekstensi - + Extension lines - Extension lines + Jalur ekstensi - - - The distance that the extension lines are additionally extended beyond the dimension line - The distance that the extension lines are additionally extended beyond the dimension line - - - + Extension overshoot - Extension overshoot + Overshoot ekstensi @@ -273,116 +321,115 @@ (Placeholder for the icon) - (Placeholder for the icon) + (Placeholder untuk ikon) Distance from one layer of objects to the next layer of objects. - Distance from one layer of objects to the next layer of objects. + Jarak dari satu lapisan objek ke lapisan objek berikutnya. Radial distance - Radial distance + Jarak radial Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. - Distance from one element in one ring of the array to the next element in the same ring. -It cannot be zero. + Jarak dari satu elemen dalam satu ring array ke elemen berikutnya dalam ring yang sama. +Tidak mungkin nol. Tangential distance - Tangential distance + Jarak tangensial Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. - Number of circular layers or rings to create, including a copy of the original object. -It must be at least 2. + Jumlah lapisan atau lingkaran melingkar yang akan dibuat, termasuk salinan objek aslinya. +Setidaknya harus 2. Number of circular layers - Number of circular layers - - - - - The number of symmetry lines in the circular array. - The number of symmetry lines in the circular array. + Jumlah lapisan melingkar + + The number of symmetry lines in the circular array. + Banyaknya garis simetri pada larik lingkaran. + + + Symmetry Simetri - + The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Koordinat titik yang dilalui sumbu rotasi. +Ubah arah sumbu itu sendiri di editor properti. - + Center of rotation - Center of rotation + Pusat rotasi - + X X - + Y Y - + Z Z - - - Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. - - Reset point - Reset point + Reset the coordinates of the center of rotation. + Setel ulang koordinat pusat rotasi. - + + Reset point + Titik reset + + + If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan. +Ini hanya berfungsi jika "Array tautan" tidak aktif. - + Fuse Sekering - + If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama. - + Link array - Link array + Susunan tautan @@ -395,14 +442,13 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Placeholder for the icon) + (Placeholder untuk ikon) Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. - Number of elements in the array in the specified direction, including a copy of the original object. -The number must be at least 1 in each direction. + Jumlah elemen dalam array dalam arah yang ditentukan, termasuk salinan dari objek aslinya. Jumlahnya harus minimal 1 di setiap arah. @@ -411,56 +457,54 @@ The number must be at least 1 in each direction. - - - + + + X X - - - - + + + + Y Y - - - - + + + + Z Z - + Distance between the elements in the X direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the X direction. -Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Jarak antar elemen dalam arah X. Biasanya, hanya nilai X yang diperlukan; dua nilai lainnya dapat memberikan pergeseran tambahan ke arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan dengan arah negatif. - + X intervals X intervals - - - + + + Reset the distances. Reset the distances. - + Reset X Reset X - + Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. @@ -469,17 +513,17 @@ Normally, only the Y value is necessary; the other two values can give an additi Negative values will result in copies produced in the negative direction. - + Y intervals Y intervals - + Reset Y Reset Y - + Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. @@ -488,38 +532,37 @@ Normally, only the Z value is necessary; the other two values can give an additi Negative values will result in copies produced in the negative direction. - + Z intervals Z intervals - + Reset Z Reset Z - + If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan. +Ini hanya berfungsi jika "Array tautan" tidak aktif. - + Fuse Sekering - + If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama. - + Link array - Link array + Susunan tautan @@ -532,7 +575,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Placeholder for the icon) + (Placeholder untuk ikon) @@ -563,65 +606,64 @@ It must be at least 2. Jumlah elemen - + The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. - The coordinates of the point through which the axis of rotation passes. -Change the direction of the axis itself in the property editor. + Koordinat titik yang dilalui sumbu rotasi. +Ubah arah sumbu itu sendiri di editor properti. - + Center of rotation - Center of rotation + Pusat rotasi - + X X - + Y Y - + Z Z - - - Reset the coordinates of the center of rotation. - Reset the coordinates of the center of rotation. - - Reset point - Reset point + Reset the coordinates of the center of rotation. + Setel ulang koordinat pusat rotasi. - + + Reset point + Titik reset + + + If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - If checked, the resulting objects in the array will be fused if they touch each other. -This only works if "Link array" is off. + Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan. +Ini hanya berfungsi jika "Array tautan" tidak aktif. - + Fuse Sekering - + If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - If checked, the resulting object will be a "Link array" instead of a regular array. -A Link array is more efficient when creating multiple copies, but it cannot be fused together. + Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama. - + Link array - Link array + Susunan tautan @@ -937,12 +979,12 @@ value by using the [ and ] keys while drawing Dashed - Dashed + Strip Dotted - Dotted + Titik-titik @@ -1001,6 +1043,7 @@ value by using the [ and ] keys while drawing + Annotations Anotasi @@ -1082,12 +1125,12 @@ value by using the [ and ] keys while drawing Tick - Tick + Centang Tick-2 - Tick-2 + Centang-2 @@ -1129,11 +1172,6 @@ value by using the [ and ] keys while drawing Selected Terpilih - - - Texts/dims - Texts/dims - Hatch @@ -1401,88 +1439,78 @@ Note that this is not fully supported, and many object will be not editable with - Default template sheet - Lembar template standar - - - - The default template to use when creating a new drawing sheet - The bawaan template untuk digunakan saat membuat baru gambar sheet - - - Alternate SVG patterns location Alternate SVG patterns location - + Here you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patterns Here you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patterns - + SVG pattern resolution SVG pattern resolution - + The resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing faster The resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing faster - + SVG pattern default size SVG pattern default size - + The default size for SVG patterns The default size for SVG patterns - + Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only) - + Preserve colors of faces during downgrade/upgrade Preserve colors of faces during downgrade/upgrade - + Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only) - + Preserve names of faces during downgrade/upgrade Preserve names of faces during downgrade/upgrade - + Drawing view line definitions Menggambar definisi garis tampilan - + Dashed line definition Definisi garis putus-putus + - An SVG linestyle definition Definisi SVG linestyle - + Dashdot line definition Dashdot baris definisi - + Dotted line definition Definisi garis putus-putus @@ -1525,6 +1553,7 @@ such as "Arial:Bold" Standar tinggi untuk teks dan dimensi + @@ -1532,7 +1561,6 @@ such as "Arial:Bold" - mm mm @@ -1548,13 +1576,13 @@ such as "Arial:Bold" - text above (2D) - teks di atas (2D) + World + World - text inside (3D) - teks di dalam (3D) + Screen + Screen @@ -1614,12 +1642,12 @@ such as "Arial:Bold" Tick - Tick + Centang Tick-2 - Tick-2 + Centang-2 @@ -1851,9 +1879,9 @@ from the Addon Manager. Biarkan FreeCAD mendownload dan memperbarui perpustakaan DXF secara otomatis - - + + Import options Pilihan impor @@ -2061,8 +2089,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Pilihan ekspor @@ -2600,4 +2628,5469 @@ This might fail for post DXF R12 templates. Annotation scale widget + + draft + + + + Relative + Relative + + + + + Global + Global + + + + + + Continue + Lanjutkan + + + + + Close + Dekat + + + + + + + + + + Copy + Salinan + + + + Subelement mode + Subelement mode + + + + Fill + Fill + + + + Exit + Keluar + + + + Snap On/Off + Snap On/Off + + + + Increase snap radius + Increase snap radius + + + + Decrease snap radius + Decrease snap radius + + + + Restrict X + Restrict X + + + + Restrict Y + Restrict Y + + + + Restrict Z + Restrict Z + + + + + Select edge + Select edge + + + + Add custom snap point + Add custom snap point + + + + Length mode + Length mode + + + + + Wipe + Wipe + + + + Set Working Plane + Tetapkan Pesawat Kerja + + + + Cycle snap object + Cycle snap object + + + + Undo last segment + Undo last segment + + + + + + Top + Puncak + + + + + + Front + Depan + + + + + + Side + Side + + + + Auto + Mobil + + + + + + + + + None + Tidak ada + + + + active command: + active command: + + + + Active Draft command + Active Draft command + + + + X coordinate of next point + X coordinate of next point + + + + X + X + + + + Y + Y + + + + Z + Z + + + + Y coordinate of next point + Y coordinate of next point + + + + Z coordinate of next point + Z coordinate of next point + + + + Enter point + Enter point + + + + Enter a new point with the given coordinates + Enter a new point with the given coordinates + + + + Length + Panjangnya + + + + + Angle + Sudut + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle + Check this to lock the current angle + + + + + Radius + Jari-jari + + + + + Radius of Circle + Radius of Circle + + + + Coordinates relative to last point or to coordinate system origin +if is the first point to set + Coordinates relative to last point or to coordinate system origin +if is the first point to set + + + + Coordinates relative to global coordinate system. +Uncheck to use working plane coordinate system + Coordinates relative to global coordinate system. +Uncheck to use working plane coordinate system + + + + Filled + Filled + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. +Not available if Draft preference option 'Use Part Primitives' is enabled + Check this if the object should appear as filled, otherwise it will appear as wireframe. +Not available if Draft preference option 'Use Part Primitives' is enabled + + + + Finish + Selesai + + + + Finishes the current drawing or editing operation + Finishes the current drawing or editing operation + + + + If checked, command will not finish until you press the command button again + If checked, command will not finish until you press the command button again + + + + If checked, an OCC-style offset will be performed instead of the classic offset + If checked, an OCC-style offset will be performed instead of the classic offset + + + + &OCC-style offset + &OCC-style offset + + + + &Undo + &Membuka + + + + Undo the last segment + Undo the last segment + + + + Finishes and closes the current line + Finishes and closes the current line + + + + Wipes the existing segments of this line and starts again from the last point + Wipes the existing segments of this line and starts again from the last point + + + + Set WP + Set WP + + + + Reorients the working plane on the last segment + Reorients the working plane on the last segment + + + + Selects an existing edge to be measured by this dimension + Selects an existing edge to be measured by this dimension + + + + Sides + Sides + + + + Number of sides + Number of sides + + + + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands + + + + Modify subelements + Modify subelements + + + + If checked, subelements will be modified instead of entire objects + If checked, subelements will be modified instead of entire objects + + + + Create text + Create text + + + + Press this button to create the text object, or finish your text with two blank lines + Press this button to create the text object, or finish your text with two blank lines + + + + + + + + Current working plane + Current working plane + + + + Change default style for new objects + Change default style for new objects + + + + Toggle construction mode + Toggle construction mode + + + + + + Autogroup off + Autogroup off + + + + Line + Garis + + + + DWire + DWire + + + + Circle + Lingkaran + + + + Arc + Busur + + + + + Rotate + Putar + + + + Point + Titik + + + + Label + Label + + + + Label type + Label type + + + + + + + + Offset + Mengimbangi + + + + + + Distance + Distance + + + + + + Offset distance + Offset distance + + + + Trimex + Trimex + + + + Local u0394X + Local u0394X + + + + Local u0394Y + Local u0394Y + + + + Local u0394Z + Local u0394Z + + + + Local X + Local X + + + + Local Y + Local Y + + + + Local Z + Local Z + + + + Global u0394X + Global u0394X + + + + Global u0394Y + Global u0394Y + + + + Global u0394Z + Global u0394Z + + + + Global X + Global X + + + + Global Y + Global Y + + + + Global Z + Global Z + + + + Autogroup: + Autogroup: + + + + Faces + Wajah + + + + Remove + Menghapus + + + + Add + Menambahkan + + + + Facebinder elements + Facebinder elements + + + + Draft + Konsep + + + + + LibreDWG error + LibreDWG error + + + + + Converting: + Converting: + + + + Conversion successful + Conversion successful + + + + Error during DWG conversion. +Try moving the DWG file to a directory path without spaces and non-english characters, +or try saving to a lower DWG version. + Error during DWG conversion. +Try moving the DWG file to a directory path without spaces and non-english characters, +or try saving to a lower DWG version. + + + + No suitable DWG converter has been found. +Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + No suitable DWG converter has been found. +Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + + + + + ODA File Converter not found + ODA File Converter not found + + + + + QCAD error + QCAD error + + + + + + All Shapes must be coplanar + All Shapes must be coplanar + + + + Selected Shapes must define a plane + Selected Shapes must define a plane + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer +To enabled FreeCAD to download these libraries, answer Yes. + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer +To enabled FreeCAD to download these libraries, answer Yes. + + + + + + + + Custom + Adat + + + + Unable to convert input into a scale factor + Unable to convert input into a scale factor + + + + Set custom scale + Set custom scale + + + + Set custom annotation scale in format x:x, x=x + Set custom annotation scale in format x:x, x=x + + + + Set the scale used by draft annotation tools + Set the scale used by draft annotation tools + + + + + + + + + + + + + + + + + + + + No active document. Aborting. + No active document. Aborting. + + + + + + + + + + + + + + + + + Wrong input: object not in document. + Wrong input: object not in document. + + + + No graphical interface + No graphical interface + + + + Unable to insert new object into a scaled part + Unable to insert new object into a scaled part + + + + Symbol not implemented. Using a default symbol. + Symbol not implemented. Using a default symbol. + + + + Visibility off; removed from list: + Visibility off; removed from list: + + + + image is Null + image is Null + + + + filename does not exist on the system or in the resource file + filename does not exist on the system or in the resource file + + + + unable to load texture + unable to load texture + + + + Does not have 'ViewObject.RootNode'. + Does not have 'ViewObject.RootNode'. + + + + Solids: + Solids: + + + + Faces: + Wajah: + + + + Wires: + Wires: + + + + Edges: + Edges: + + + + Vertices: + Vertices: + + + + Face + Menghadapi + + + + Wire + Kawat + + + + + different types + different types + + + + Objects have different placements. Distance between the two base points: + Objects have different placements. Distance between the two base points: + + + + has a different value + has a different value + + + + doesn't exist in one of the objects + doesn't exist in one of the objects + + + + %s shares a base with %d other objects. Please check if you want to modify this. + %s shares a base with %d other objects. Please check if you want to modify this. + + + + %s cannot be modified because its placement is readonly. + %s cannot be modified because its placement is readonly. + + + + Wrong input: unknown document. + Wrong input: unknown document. + + + + This function will be deprecated in + This function will be deprecated in + + + + + Please use + Please use + + + + This function will be deprecated. + This function will be deprecated. + + + + Pick a face, 3 vertices or a WP Proxy to define the drawing plane + Pick a face, 3 vertices or a WP Proxy to define the drawing plane + + + + Working plane aligned to global placement of + Working plane aligned to global placement of + + + + Dir + Dir + + + + + Please select exactly two objects, the base object and the path object, before calling this command. + Please select exactly two objects, the base object and the path object, before calling this command. + + + + Path array + Path array + + + + Pick target point + Pick target point + + + + Create Label + Create Label + + + + + Pick endpoint of leader line + Pick endpoint of leader line + + + + + Pick text position + Pick text position + + + + + + + Pick first point + Pick first point + + + + Create Line + Create Line + + + + Create Wire + Create Wire + + + + + + + + + + + + Pick next point + Pick next point + + + + Unable to create a Wire from selected objects + Unable to create a Wire from selected objects + + + + Convert to Wire + Convert to Wire + + + + Select an object to join + Select an object to join + + + + Join lines + Join lines + + + + Selection: + Pilihan: + + + + Pick location point + Pick location point + + + + Create Text + Create Text + + + + Select an object to convert. + Select an object to convert. + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert Draft/Sketch + Convert Draft/Sketch + + + + Select an object to move + Select an object to move + + + + Pick start point + Pick start point + + + + + Pick end point + Pick end point + + + + Move + Pindah + + + + + Some subelements could not be moved. + Some subelements could not be moved. + + + + + Pick center point + Pick center point + + + + + + + + + Pick radius + Pick radius + + + + + + + Start angle + Start angle + + + + + Pick start angle + Pick start angle + + + + + + + Aperture angle + Aperture angle + + + + Pick aperture + Pick aperture + + + + Create Circle (Part) + Create Circle (Part) + + + + Create Circle + Create Circle + + + + Create Arc (Part) + Create Arc (Part) + + + + Create Arc + Create Arc + + + + Pick aperture angle + Pick aperture angle + + + + + Arc by 3 points + Arc by 3 points + + + + Toggle grid + Toggle grid + + + + Select an object to edit + Select an object to edit + + + + Select a Draft object to edit + Select a Draft object to edit + + + + Edit node + Edit node + + + + No edit point found for selected object + No edit point found for selected object + + + + Too many objects selected, max number set to: + Too many objects selected, max number set to: + + + + : this object is not editable + : this object is not editable + + + + Annotation style editor + Annotation style editor + + + + Open styles file + Open styles file + + + + + JSON file (*.json) + JSON file (*.json) + + + + Save styles file + Save styles file + + + + Select an object to project + Select an object to project + + + + + Create Point + Create Point + + + + Select an object to rotate + Select an object to rotate + + + + Pick rotation center + Pick rotation center + + + + + Base angle + Base angle + + + + + The base angle you wish to start the rotation from + The base angle you wish to start the rotation from + + + + + Pick base angle + Pick base angle + + + + + Rotation + Rotation + + + + + The amount of rotation you wish to perform. +The final angle will be the base angle plus this amount. + The amount of rotation you wish to perform. +The final angle will be the base angle plus this amount. + + + + + Pick rotation angle + Pick rotation angle + + + + Add to group + Add to group + + + + Ungroup + Ungroup + + + + Add new group + Add new group + + + + Select group + Select group + + + + No new selection. You must select non-empty groups or objects inside groups. + No new selection. You must select non-empty groups or objects inside groups. + + + + Autogroup + Grup otomatis + + + + Add new Layer + Add new Layer + + + + Add to construction group + Add to construction group + + + + Add a new group with a given name + Add a new group with a given name + + + + Add group + Add group + + + + Group name + Group name + + + + Group + Kelompok + + + + Flip dimension + Flip dimension + + + + Sketch is too complex to edit: it is suggested to use sketcher default editor + Sketch is too complex to edit: it is suggested to use sketcher default editor + + + + Fillet radius + Fillet radius + + + + Radius of fillet + Radius of fillet + + + + Enter radius. + Enter radius. + + + + Delete original objects: + Delete original objects: + + + + Chamfer mode: + Chamfer mode: + + + + Two elements needed. + Two elements needed. + + + + Test object + Test object + + + + Test object removed + Test object removed + + + + Fillet cannot be created + Fillet cannot be created + + + + Create fillet + Buat fillet + + + + Create Polygon (Part) + Create Polygon (Part) + + + + Create Polygon + Create Polygon + + + + Click anywhere on a line to split it. + Click anywhere on a line to split it. + + + + Split line + Split line + + + + Select objects to trim or extend + Select objects to trim or extend + + + + + Pick distance + Pick distance + + + + Offset angle + Offset angle + + + + Unable to trim these objects, only Draft wires and arcs are supported. + Unable to trim these objects, only Draft wires and arcs are supported. + + + + Unable to trim these objects, too many wires + Unable to trim these objects, too many wires + + + + These objects don't intersect. + These objects don't intersect. + + + + Too many intersection points. + Too many intersection points. + + + + Spline has been closed + Spline has been closed + + + + + + Last point has been removed + Last point has been removed + + + + Create B-spline + Buat B-spline + + + + Change Style + Change Style + + + + + This object does not support possible coincident points, please try again. + This object does not support possible coincident points, please try again. + + + + + Delete point + Delete point + + + + + Add point + Add point + + + + Open wire + Open wire + + + + Close wire + Tutup kawat + + + + Reverse wire + Reverse wire + + + + + Active object must have more than two points/nodes + Active object must have more than two points/nodes + + + + Open spline + Open spline + + + + Close spline + Close spline + + + + Reverse spline + Reverse spline + + + + Move arc + Move arc + + + + Set first angle + Set first angle + + + + Set last angle + Set last angle + + + + Set radius + Set radius + + + + Invert arc + Invert arc + + + + Make sharp + Make sharp + + + + Make tangent + Make tangent + + + + Make symmetric + Make symmetric + + + + Reverse curve + Reverse curve + + + + Open curve + Open curve + + + + Close curve + Close curve + + + + Selection is not a Knot + Selection is not a Knot + + + + Endpoint of BezCurve can't be smoothed + Endpoint of BezCurve can't be smoothed + + + + + Bézier curve has been closed + Bézier curve has been closed + + + + + Create BezCurve + Create BezCurve + + + + + Click and drag to define next knot + Click and drag to define next knot + + + + + Create Ellipse + Create Ellipse + + + + + Pick opposite point + Pick opposite point + + + + Select faces from existing objects + Select faces from existing objects + + + + Select an object to scale + Select an object to scale + + + + Pick base point + Pick base point + + + + Pick reference distance from base point + Pick reference distance from base point + + + + + + Scale + Skala + + + + Some subelements could not be scaled. + Some subelements could not be scaled. + + + + Unable to scale object: + Unable to scale object: + + + + Unable to scale objects: + Unable to scale objects: + + + + This object type cannot be scaled directly. Please use the clone method. + This object type cannot be scaled directly. Please use the clone method. + + + + Pick new distance from base point + Pick new distance from base point + + + + + + Layer + Layer + + + + Please select exactly two objects, the base object and the point object, before calling this command. + Please select exactly two objects, the base object and the point object, before calling this command. + + + + Point array + Point array + + + + No active Draft Toolbar. + No active Draft Toolbar. + + + + Construction mode + Construction mode + + + + Continue mode + Continue mode + + + + Toggle display mode + Toggle display mode + + + + + + + Create Dimension + Create Dimension + + + + Create Dimension (radial) + Create Dimension (radial) + + + + Edge too short! + Edge too short! + + + + Edges don't intersect! + Edges don't intersect! + + + + Select an object to stretch + Select an object to stretch + + + + Pick first point of selection rectangle + Pick first point of selection rectangle + + + + Pick opposite point of selection rectangle + Pick opposite point of selection rectangle + + + + Pick start point of displacement + Pick start point of displacement + + + + Pick end point of displacement + Pick end point of displacement + + + + Turning one Rectangle into a Wire + Turning one Rectangle into a Wire + + + + Stretch + Stretch + + + + Create Plane + Create Plane + + + + Create Rectangle + Create Rectangle + + + + Select an object to mirror + Select an object to mirror + + + + Pick start point of mirror line + Pick start point of mirror line + + + + Mirror + Mirror + + + + + Pick end point of mirror line + Pick end point of mirror line + + + + Path twisted array + Path twisted array + + + + Select an object to clone + Select an object to clone + + + + Change slope + Change slope + + + + + Select an object to upgrade + Select an object to upgrade + + + + Upgrade + Upgrade + + + + Select an object to offset + Select an object to offset + + + + Offset only works on one object at a time. + Offset only works on one object at a time. + + + + Cannot offset this object type + Cannot offset this object type + + + + Offset of Bezier curves is currently not supported + Offset of Bezier curves is currently not supported + + + + Create 2D view + Create 2D view + + + + Pick ShapeString location point + Pick ShapeString location point + + + + Create ShapeString + Create ShapeString + + + + Heal + Heal + + + + Downgrade + Downgrade + + + + Select an object to array + Select an object to array + + + + Array + Array + + + + + + Task panel: + Task panel: + + + + + + + Polar array + Polar array + + + + + + At least one element must be selected. + At least one element must be selected. + + + + + + Selection is not suitable for array. + Selection is not suitable for array. + + + + + + + + + Object: + Object: + + + + Number of elements must be at least 2. + Number of elements must be at least 2. + + + + The angle is above 360 degrees. It is set to this value to proceed. + The angle is above 360 degrees. It is set to this value to proceed. + + + + The angle is below -360 degrees. It is set to this value to proceed. + The angle is below -360 degrees. It is set to this value to proceed. + + + + + Center reset: + Center reset: + + + + + + Fuse: + Fuse: + + + + + + Create Link array: + Create Link array: + + + + Number of elements: + Number of elements: + + + + Polar angle: + Polar angle: + + + + + Center of rotation: + Center of rotation: + + + + + + Aborted: + Aborted: + + + + + + + + Orthogonal array + Orthogonal array + + + + Number of elements must be at least 1. + Number of elements must be at least 1. + + + + Interval X reset: + Interval X reset: + + + + Interval Y reset: + Interval Y reset: + + + + Interval Z reset: + Interval Z reset: + + + + Number of X elements: + Number of X elements: + + + + Interval X: + Interval X: + + + + Number of Y elements: + Number of Y elements: + + + + Interval Y: + Interval Y: + + + + Number of Z elements: + Number of Z elements: + + + + Interval Z: + Interval Z: + + + + ShapeString + ShapeString + + + + Default + Bawaan + + + + + + + + Circular array + Circular array + + + + Number of layers must be at least 2. + Number of layers must be at least 2. + + + + Radial distance is zero. Resulting array may not look correct. + Radial distance is zero. Resulting array may not look correct. + + + + Radial distance is negative. It is made positive to proceed. + Radial distance is negative. It is made positive to proceed. + + + + Tangential distance cannot be zero. + Tangential distance cannot be zero. + + + + Tangential distance is negative. It is made positive to proceed. + Tangential distance is negative. It is made positive to proceed. + + + + Radial distance: + Radial distance: + + + + Tangential distance: + Tangential distance: + + + + Number of circular layers: + Number of circular layers: + + + + Symmetry parameter: + Symmetry parameter: + + + + ShapeString: string has no wires + ShapeString: string has no wires + + + + added view property 'ScaleMultiplier' + added view property 'ScaleMultiplier' + + + + added view property 'AnnotationStyle' + added view property 'AnnotationStyle' + + + + , path object doesn't have 'Edges'. + , path object doesn't have 'Edges'. + + + + + + 'PathObj' property will be migrated to 'PathObject' + 'PathObj' property will be migrated to 'PathObject' + + + + Start Offset too large for path length. Using zero instead. + Start Offset too large for path length. Using zero instead. + + + + End Offset too large for path length minus Start Offset. Using zero instead. + End Offset too large for path length minus Start Offset. Using zero instead. + + + + Length of tangent vector is zero. Copy not aligned. + Length of tangent vector is zero. Copy not aligned. + + + + + Length of normal vector is zero. Using a default axis instead. + Length of normal vector is zero. Using a default axis instead. + + + + + Tangent and normal vectors are parallel. Normal replaced by a default axis. + Tangent and normal vectors are parallel. Normal replaced by a default axis. + + + + Cannot calculate normal vector. Using the default normal instead. + Cannot calculate normal vector. Using the default normal instead. + + + + AlignMode {} is not implemented + AlignMode {} is not implemented + + + + + added property 'ExtraPlacement' + added property 'ExtraPlacement' + + + + No shape found + No shape found + + + + All Shapes must be planar + All Shapes must be planar + + + + + + + length: + length: + + + + Two elements are needed. + Two elements are needed. + + + + Radius is too large + Radius is too large + + + + + + Segment + Segment + + + + Removed original objects. + Removed original objects. + + + + + Points: + Points: + + + + + Wrong input: must be list or tuple of three points exactly. + Wrong input: must be list or tuple of three points exactly. + + + + Placement: + Placement: + + + + Wrong input: incorrect type of placement. + Wrong input: incorrect type of placement. + + + + Wrong input: incorrect type of points. + Wrong input: incorrect type of points. + + + + Cannot generate shape: + Cannot generate shape: + + + + Radius: + Radius: + + + + Center: + Pusat: + + + + Create primitive object + Create primitive object + + + + + Final placement: + Final placement: + + + + Face: True + Face: True + + + + Support: + Support: + + + + Map mode: + Map mode: + + + + + + + + + + + Wrong input: must be a number. + Wrong input: must be a number. + + + + + + + + + + + + + + + + + + Wrong input: must be a vector. + Wrong input: must be a vector. + + + + + Wrong input: must be a list or tuple of strings, or a single string. + Wrong input: must be a list or tuple of strings, or a single string. + + + + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. + + + + Internal orthogonal array + Internal orthogonal array + + + + Wrong input: must be a number or vector. + Wrong input: must be a number or vector. + + + + + + Input: single value expanded to vector. + Input: single value expanded to vector. + + + + + + Wrong input: must be an integer number. + Wrong input: must be an integer number. + + + + + + Input: number of elements must be at least 1. It is set to 1. + Input: number of elements must be at least 1. It is set to 1. + + + + Orthogonal array 2D + Orthogonal array 2D + + + + Rectangular array + Rectangular array + + + + Rectangular array 2D + Rectangular array 2D + + + + + + Wrong input: must be a placement, a vector, or a rotation. + Wrong input: must be a placement, a vector, or a rotation. + + + + + Wrong input: object must not be a list. + Wrong input: object must not be a list. + + + + Wrong input: subelement not in object. + Wrong input: subelement not in object. + + + + Wrong input: label_type must be a string. + Wrong input: label_type must be a string. + + + + Wrong input: label_type must be one of the following: + Wrong input: label_type must be one of the following: + + + + + + + Wrong input: must be a list of strings or a single string. + Wrong input: must be a list of strings or a single string. + + + + + Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + + + + Wrong input: must be a list of at least two vectors. + Wrong input: must be a list of at least two vectors. + + + + Direction is not 'Custom'; points won't be used. + Direction is not 'Custom'; points won't be used. + + + + Wrong input: must be a list of two elements. For example, [object, 'Edge1']. + Wrong input: must be a list of two elements. For example, [object, 'Edge1']. + + + + Wrong input: object has the wrong type. + Wrong input: object has the wrong type. + + + + This function is deprecated. Do not use this function directly. + This function is deprecated. Do not use this function directly. + + + + Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. + Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. + + + + + Wrong input: object doesn't have a 'Shape' to measure. + Wrong input: object doesn't have a 'Shape' to measure. + + + + Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. + Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. + + + + + Wrong input: must be an integer. + Wrong input: must be an integer. + + + + i1: values below 1 are not allowed; will be set to 1. + i1: values below 1 are not allowed; will be set to 1. + + + + + Wrong input: vertex not in object. + Wrong input: vertex not in object. + + + + i2: values below 1 are not allowed; will be set to the last vertex in the object. + i2: values below 1 are not allowed; will be set to the last vertex in the object. + + + + Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. + Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. + + + + index: values below 1 are not allowed; will be set to 1. + index: values below 1 are not allowed; will be set to 1. + + + + Wrong input: index doesn't correspond to an edge in the object. + Wrong input: index doesn't correspond to an edge in the object. + + + + Wrong input: index doesn't correspond to a circular edge. + Wrong input: index doesn't correspond to a circular edge. + + + + + Wrong input: must be a string, 'radius' or 'diameter'. + Wrong input: must be a string, 'radius' or 'diameter'. + + + + + Wrong input: must be a list with two angles. + Wrong input: must be a list with two angles. + + + + Wrong input: must be a number or quantity. + Wrong input: must be a number or quantity. + + + + Layers + Layers + + + + Wrong input: it must be a string. + Wrong input: it must be a string. + + + + + + + Wrong input: must be a tuple of three floats 0.0 to 1.0. + Wrong input: must be a tuple of three floats 0.0 to 1.0. + + + + + Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. + Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. + + + + Wrong input: must be a number between 0 and 100. + Wrong input: must be a number between 0 and 100. + + + + Activate this layer + Activate this layer + + + + Select layer contents + Select layer contents + + + + + Merge layer duplicates + Merge layer duplicates + + + + + Add new layer + Add new layer + + + + Relabeling layer: + Relabeling layer: + + + + Merging layer: + Merging layer: + + + + + + Edit + Edit + + + + + Flatten + Flatten + + + + + Upgrade: Unknown force method: + Upgrade: Unknown force method: + + + + Found 1 block: exploding it + Found 1 block: exploding it + + + + Found 1 multi-solids compound: exploding it + Found 1 multi-solids compound: exploding it + + + + Found 1 parametric object: breaking its dependencies + Found 1 parametric object: breaking its dependencies + + + + Found 2 objects: subtracting them + Found 2 objects: subtracting them + + + + Found several faces: splitting them + Found several faces: splitting them + + + + Found several objects: subtracting them from the first one + Found several objects: subtracting them from the first one + + + + Found 1 face: extracting its wires + Found 1 face: extracting its wires + + + + Found only wires: extracting their edges + Found only wires: extracting their edges + + + + No more downgrade possible + No more downgrade possible + + + + No object given + No object given + + + + The two points are coincident + The two points are coincident + + + + mirrored + mirrored + + + + Object must be a closed shape + Object must be a closed shape + + + + No solid object created + No solid object created + + + + Faces must be coplanar to be refined + Faces must be coplanar to be refined + + + + Found groups: closing each open object inside + Found groups: closing each open object inside + + + + Found meshes: turning into Part shapes + Found meshes: turning into Part shapes + + + + Found 1 solidifiable object: solidifying it + Found 1 solidifiable object: solidifying it + + + + Found 2 objects: fusing them + Found 2 objects: fusing them + + + + Found object with several coplanar faces: refine them + Found object with several coplanar faces: refine them + + + + Found 1 non-parametric objects: draftifying it + Found 1 non-parametric objects: draftifying it + + + + Found 1 closed sketch object: creating a face from it + Found 1 closed sketch object: creating a face from it + + + + Found closed wires: creating faces + Found closed wires: creating faces + + + + Found several wires or edges: wiring them + Found several wires or edges: wiring them + + + + + Found several non-treatable objects: creating compound + Found several non-treatable objects: creating compound + + + + trying: closing it + trying: closing it + + + + Found 1 open wire: closing it + Found 1 open wire: closing it + + + + Found 1 object: draftifying it + Found 1 object: draftifying it + + + + Found points: creating compound + Found points: creating compound + + + + Unable to upgrade these objects. + Unable to upgrade these objects. + + + + Text + Teks + + + + added view property 'TextColor' + added view property 'TextColor' + + + + + + renamed 'DisplayMode' options to 'World/Screen' + renamed 'DisplayMode' options to 'World/Screen' + + + + renamed view property 'TextFont' to 'FontName' + renamed view property 'TextFont' to 'FontName' + + + + renamed view property 'TextSize' to 'FontSize' + renamed view property 'TextSize' to 'FontSize' + + + + added missing view properties + added missing view properties + + + + added property 'Count' + added property 'Count' + + + + Workbench + + + Draft creation tools + Draft creation tools + + + + Draft annotation tools + Draft annotation tools + + + + Draft modification tools + Draft modification tools + + + + Draft utility tools + Draft utility tools + + + + + Draft snap + Draft snap + + + + &Drafting + &Drafting + + + + &Annotation + &Annotation + + + + &Modification + &Modification + + + + &Utilities + &Utilities + + + + Arc tools + Arc tools + + + + Bézier tools + Bézier tools + + + + Array tools + Array tools + + + + Draft + + + + + + + Draft + Konsep + + + + + + + Import-Export + Ekspor Impor + + + + Download of dxf libraries failed. +Please install the dxf Library addon manually +from menu Tools -> Addon Manager + Download of dxf libraries failed. +Please install the dxf Library addon manually +from menu Tools -> Addon Manager + + + + You must choose a base object before using this command + You must choose a base object before using this command + + + + Delete original objects + Delete original objects + + + + Create chamfer + Create chamfer + + + + Save style + Save style + + + + Name of this new style: + Name of this new style: + + + + Warning + Warning + + + + Name exists. Overwrite? + Name exists. Overwrite? + + + + Error: json module not found. Unable to save style + Error: json module not found. Unable to save style + + + + Clone + Klon + + + + + Slope + Slope + + + + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + + + + + + True + Benar + + + + + + False + Salah + + + + Scale + Skala + + + + X factor + X factor + + + + Y factor + Y factor + + + + Z factor + Z factor + + + + Uniform scaling + Uniform scaling + + + + Working plane orientation + Working plane orientation + + + + Copy + Salinan + + + + Modify subelements + Modify subelements + + + + Pick from/to points + Pick from/to points + + + + Create a clone + Buat tiruan + + + + Point object doesn't have a discrete point, it cannot be used for an array. + Point object doesn't have a discrete point, it cannot be used for an array. + + + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + + + + Writing camera position + Writing camera position + + + + Writing objects shown/hidden state + Writing objects shown/hidden state + + + + On + On + + + + Name + Nama + + + + Line width + Lebar garis + + + + Draw style + Menggambar gaya + + + + Line color + Line warna + + + + Face color + Face color + + + + Transparency + Transparansi + + + + Line print color + Line print color + + + + New Layer + New Layer + + + + importOCA + + + OCA: found no data to export + OCA: found no data to export + + + + successfully exported + successfully exported + + + + ImportAirfoilDAT + + + Did not find enough coordinates + Did not find enough coordinates + + + + ImportSVG + + + Unknown SVG export style, switching to Translated + Unknown SVG export style, switching to Translated + + + + The export list contains no object with a valid bounding box + The export list contains no object with a valid bounding box + + + + Draft_SelectPlane + + + Select Plane + Select Plane + + + + Select the face of solid body to create a working plane on which to sketch Draft objects. +You may also select a three vertices or a Working Plane Proxy. + Select the face of solid body to create a working plane on which to sketch Draft objects. +You may also select a three vertices or a Working Plane Proxy. + + + + Draft_PathArray + + + Path array + Path array + + + + Creates copies of the selected object along a selected path. +First select the object, and then select the path. +The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. + Creates copies of the selected object along a selected path. +First select the object, and then select the path. +The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. + + + + Draft_PathLinkArray + + + Path Link array + Path Link array + + + + Like the PathArray tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Like the PathArray tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + + + + Draft_Label + + + Label + Label + + + + Creates a label, optionally attached to a selected object or subelement. + +First select a vertex, an edge, or a face of an object, then call this command, +and then set the position of the leader line and the textual label. +The label will be able to display information about this object, and about the selected subelement, +if any. + +If many objects or many subelements are selected, only the first one in each case +will be used to provide information to the label. + Creates a label, optionally attached to a selected object or subelement. + +First select a vertex, an edge, or a face of an object, then call this command, +and then set the position of the leader line and the textual label. +The label will be able to display information about this object, and about the selected subelement, +if any. + +If many objects or many subelements are selected, only the first one in each case +will be used to provide information to the label. + + + + Draft_Line + + + Line + Garis + + + + Creates a 2-point line. CTRL to snap, SHIFT to constrain. + Creates a 2-point line. CTRL to snap, SHIFT to constrain. + + + + Draft_Wire + + + Polyline + Polyline + + + + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. + + + + Draft_Hatch + + + Hatch + Hatch + + + + Creates hatches on the faces of a selected object + Creates hatches on the faces of a selected object + + + + Draft_Join + + + Join + Join + + + + Joins the selected lines or polylines into a single object. +The lines must share a common point at the start or at the end for the operation to succeed. + Joins the selected lines or polylines into a single object. +The lines must share a common point at the start or at the end for the operation to succeed. + + + + Draft_Text + + + Text + Teks + + + + Creates a multi-line annotation. CTRL to snap. + Creates a multi-line annotation. CTRL to snap. + + + + Draft_Draft2Sketch + + + Draft to Sketch + Draft to Sketch + + + + Convert bidirectionally between Draft objects and Sketches. +Many Draft objects will be converted into a single non-constrained Sketch. +However, a single sketch with disconnected traces will be converted into several individual Draft objects. + Convert bidirectionally between Draft objects and Sketches. +Many Draft objects will be converted into a single non-constrained Sketch. +However, a single sketch with disconnected traces will be converted into several individual Draft objects. + + + + Draft_Snap_Lock + + + Snap Lock + Snap Lock + + + + Enables or disables snapping globally. + Enables or disables snapping globally. + + + + Draft_Snap_Midpoint + + + Snap Midpoint + Snap Midpoint + + + + Snaps to the midpoint of edges. + Snaps to the midpoint of edges. + + + + Draft_Snap_Perpendicular + + + Snap Perpendicular + Snap Perpendicular + + + + Snaps to the perpendicular points on faces and edges. + Snaps to the perpendicular points on faces and edges. + + + + Draft_Snap_Grid + + + Snap Grid + Snap Grid + + + + Snaps to the intersections of grid lines. + Snaps to the intersections of grid lines. + + + + Draft_Snap_Intersection + + + Snap Intersection + Snap Intersection + + + + Snaps to the intersection of two edges. + Snaps to the intersection of two edges. + + + + Draft_Snap_Parallel + + + Snap Parallel + Snap Parallel + + + + Snaps to an imaginary line parallel to straight edges. + Snaps to an imaginary line parallel to straight edges. + + + + Draft_Snap_Endpoint + + + Snap Endpoint + Snap Endpoint + + + + Snaps to the endpoints of edges. + Snaps to the endpoints of edges. + + + + Draft_Snap_Angle + + + Snap Angle + Snap Angle + + + + Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. + Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. + + + + Draft_Snap_Center + + + Snap Center + Snap Center + + + + Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. + Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. + + + + Draft_Snap_Extension + + + Snap Extension + Snap Extension + + + + Snaps to an imaginary line that extends beyond the endpoints of straight edges. + Snaps to an imaginary line that extends beyond the endpoints of straight edges. + + + + Draft_Snap_Near + + + Snap Near + Snap Near + + + + Snaps to the nearest point on faces and edges. + Snaps to the nearest point on faces and edges. + + + + Draft_Snap_Ortho + + + Snap Ortho + Snap Ortho + + + + Snaps to imaginary lines that cross the previous point at multiples of 45°. + Snaps to imaginary lines that cross the previous point at multiples of 45°. + + + + Draft_Snap_Special + + + Snap Special + Snap Special + + + + Snaps to special points defined by the object. + Snaps to special points defined by the object. + + + + Draft_Snap_Dimensions + + + Snap Dimensions + Snap Dimensions + + + + Shows temporary X and Y dimensions. + Shows temporary X and Y dimensions. + + + + Draft_Snap_WorkingPlane + + + Snap Working Plane + Snap Working Plane + + + + Projects snap points onto the current working plane. + Projects snap points onto the current working plane. + + + + Draft_ShowSnapBar + + + Show snap toolbar + Show snap toolbar + + + + Shows the snap toolbar if it is hidden. + Shows the snap toolbar if it is hidden. + + + + Draft_Move + + + Move + Pindah + + + + Moves the selected objects from one base point to another point. +If the "copy" option is active, it will create displaced copies. +CTRL to snap, SHIFT to constrain. + Moves the selected objects from one base point to another point. +If the "copy" option is active, it will create displaced copies. +CTRL to snap, SHIFT to constrain. + + + + Draft_Arc + + + Arc + Busur + + + + Creates a circular arc by a center point and a radius. +CTRL to snap, SHIFT to constrain. + Creates a circular arc by a center point and a radius. +CTRL to snap, SHIFT to constrain. + + + + Draft_Arc_3Points + + + Arc by 3 points + Arc by 3 points + + + + Creates a circular arc by picking 3 points. +CTRL to snap, SHIFT to constrain. + Creates a circular arc by picking 3 points. +CTRL to snap, SHIFT to constrain. + + + + Draft_ArcTools + + + Arc tools + Arc tools + + + + Create various types of circular arcs. + Create various types of circular arcs. + + + + Draft_ToggleGrid + + + Toggle grid + Toggle grid + + + + Toggles the Draft grid on and off. + Toggles the Draft grid on and off. + + + + Draft_SubelementHighlight + + + Subelement highlight + Subelement highlight + + + + Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. + Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. + + + + Draft_Edit + + + Edit + Edit + + + + Edits the active object. +Press E or ALT+LeftClick to display context menu +on supported nodes and on supported objects. + Edits the active object. +Press E or ALT+LeftClick to display context menu +on supported nodes and on supported objects. + + + + Draft_AddPoint + + + Add point + Add point + + + + Adds a point to an existing Wire or B-spline. + Adds a point to an existing Wire or B-spline. + + + + Draft_DelPoint + + + Remove point + Remove point + + + + Removes a point from an existing Wire or B-spline. + Removes a point from an existing Wire or B-spline. + + + + Draft_CircularArray + + + Circular array + Circular array + + + + Creates copies of the selected object, and places the copies in a radial pattern +creating various circular layers. + +The array can be turned into an orthogonal or a polar array by changing its type. + Creates copies of the selected object, and places the copies in a radial pattern +creating various circular layers. + +The array can be turned into an orthogonal or a polar array by changing its type. + + + + Draft_AnnotationStyleEditor + + + Annotation styles... + Annotation styles... + + + + Manage or create annotation styles + Manage or create annotation styles + + + + Draft_Point + + + Point + Titik + + + + Creates a point object. Click anywhere on the 3D view. + Creates a point object. Click anywhere on the 3D view. + + + + Draft_Rotate + + + Rotate + Putar + + + + Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. +If the "copy" option is active, it will create rotated copies. +CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. +If the "copy" option is active, it will create rotated copies. +CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + + + + Draft_AddToGroup + + + Move to group... + Move to group... + + + + Moves the selected objects to an existing group, or removes them from any group. +Create a group first to use this tool. + Moves the selected objects to an existing group, or removes them from any group. +Create a group first to use this tool. + + + + Draft_SelectGroup + + + Select group + Select group + + + + Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. + Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. + + + + Draft_AutoGroup + + + Autogroup + Grup otomatis + + + + Select a group to add all Draft and Arch objects to. + Select a group to add all Draft and Arch objects to. + + + + Draft_AddConstruction + + + Add to Construction group + Add to Construction group + + + + Adds the selected objects to the construction group, +and changes their appearance to the construction style. +It creates a construction group if it doesn't exist. + Adds the selected objects to the construction group, +and changes their appearance to the construction style. +It creates a construction group if it doesn't exist. + + + + Draft_AddNamedGroup + + + Add a new named group + Add a new named group + + + + Add a new group with a given name. + Add a new group with a given name. + + + + Draft_WorkingPlaneProxy + + + Create working plane proxy + Create working plane proxy + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + + + Draft_WireToBSpline + + + Wire to B-spline + Wire to B-spline + + + + Converts a selected polyline to a B-spline, or a B-spline to a polyline. + Converts a selected polyline to a B-spline, or a B-spline to a polyline. + + + + Draft_FlipDimension + + + Flip dimension + Flip dimension + + + + Flip the normal direction of the selected dimensions (linear, radial, angular). +If other objects are selected they are ignored. + Flip the normal direction of the selected dimensions (linear, radial, angular). +If other objects are selected they are ignored. + + + + Draft_Fillet + + + Fillet + Fillet + + + + Creates a fillet between two selected wires or edges. + Creates a fillet between two selected wires or edges. + + + + Draft_SetStyle + + + Set style + Set style + + + + Sets default styles + Sets default styles + + + + Draft_Polygon + + + Polygon + Poligon + + + + Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. +CTRL to snap, SHIFT to constrain + Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. +CTRL to snap, SHIFT to constrain + + + + Draft_Split + + + Split + Split + + + + Splits the selected line or polyline into two independent lines +or polylines by clicking anywhere along the original object. +It works best when choosing a point on a straight segment and not a corner vertex. + Splits the selected line or polyline into two independent lines +or polylines by clicking anywhere along the original object. +It works best when choosing a point on a straight segment and not a corner vertex. + + + + Draft_Trimex + + + Trimex + Trimex + + + + Trims or extends the selected object, or extrudes single faces. +CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. + Trims or extends the selected object, or extrudes single faces. +CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. + + + + Draft_BSpline + + + B-spline + B-spline + + + + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. + + + + Draft_ApplyStyle + + + Apply current style + Apply current style + + + + Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. + Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. + + + + Draft_BezCurve + + + Bézier curve + Bézier curve + + + + Creates an N-degree Bézier curve. The more points you pick, the higher the degree. +CTRL to snap, SHIFT to constrain. + Creates an N-degree Bézier curve. The more points you pick, the higher the degree. +CTRL to snap, SHIFT to constrain. + + + + Draft_CubicBezCurve + + + Cubic Bézier curve + Cubic Bézier curve + + + + Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. +After the curve is created you can go back to edit each control point and set the properties of each knot. +CTRL to snap, SHIFT to constrain. + Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. +After the curve is created you can go back to edit each control point and set the properties of each knot. +CTRL to snap, SHIFT to constrain. + + + + Draft_BezierTools + + + Bézier tools + Bézier tools + + + + Create various types of Bézier curves. + Create various types of Bézier curves. + + + + Draft_Circle + + + Circle + Lingkaran + + + + Creates a circle (full circular arc). +CTRL to snap, ALT to select tangent objects. + Creates a circle (full circular arc). +CTRL to snap, ALT to select tangent objects. + + + + Draft_Ellipse + + + Ellipse + Elips + + + + Creates an ellipse. CTRL to snap. + Creates an ellipse. CTRL to snap. + + + + Draft_Facebinder + + + Facebinder + Pengikat wajah + + + + Creates a facebinder object from selected faces. + Creates a facebinder object from selected faces. + + + + Draft_OrthoArray + + + Array + Array + + + + Creates copies of the selected object, and places the copies in an orthogonal pattern, +meaning the copies follow the specified direction in the X, Y, Z axes. + +The array can be turned into a polar or a circular array by changing its type. + Creates copies of the selected object, and places the copies in an orthogonal pattern, +meaning the copies follow the specified direction in the X, Y, Z axes. + +The array can be turned into a polar or a circular array by changing its type. + + + + Draft_Scale + + + Scale + Skala + + + + Scales the selected objects from a base point. +CTRL to snap, SHIFT to constrain, ALT to copy. + Scales the selected objects from a base point. +CTRL to snap, SHIFT to constrain, ALT to copy. + + + + Draft_Layer + + + Layer + Layer + + + + Adds a layer to the document. +Objects added to this layer can share the same visual properties such as line color, line width, and shape color. + Adds a layer to the document. +Objects added to this layer can share the same visual properties such as line color, line width, and shape color. + + + + Draft_PointArray + + + Point array + Point array + + + + Creates copies of the selected base object at the points of a point object. +First select the base object, and then select the point object. + Creates copies of the selected base object at the points of a point object. +First select the base object, and then select the point object. + + + + Draft_PointLinkArray + + + PointLinkArray + PointLinkArray + + + + Like the PointArray tool, but creates a 'Point link array' instead. +A 'Point link array' is more efficient when handling many copies. + Like the PointArray tool, but creates a 'Point link array' instead. +A 'Point link array' is more efficient when handling many copies. + + + + Draft_ArrayTools + + + Array tools + Array tools + + + + Create various types of arrays, including rectangular, polar, circular, path, and point + Create various types of arrays, including rectangular, polar, circular, path, and point + + + + Draft_ToggleConstructionMode + + + Toggle construction mode + Toggle construction mode + + + + Toggles the Construction mode. +When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. + Toggles the Construction mode. +When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. + + + + Draft_ToggleContinueMode + + + Toggle continue mode + Toggle continue mode + + + + Toggles the Continue mode. +When this is active, any drawing tool that is terminated will automatically start again. +This can be used to draw several objects one after the other in succession. + Toggles the Continue mode. +When this is active, any drawing tool that is terminated will automatically start again. +This can be used to draw several objects one after the other in succession. + + + + Draft_ToggleDisplayMode + + + Toggle normal/wireframe display + Toggle normal/wireframe display + + + + Switches the display mode of selected objects from flatlines to wireframe and back. +This is helpful to quickly visualize objects that are hidden by other objects. +This is intended to be used with closed shapes and solids, and doesn't affect open wires. + Switches the display mode of selected objects from flatlines to wireframe and back. +This is helpful to quickly visualize objects that are hidden by other objects. +This is intended to be used with closed shapes and solids, and doesn't affect open wires. + + + + Draft_Dimension + + + Dimension + Dimensi + + + + Creates a dimension. + +- Pick three points to create a simple linear dimension. +- Select a straight line to create a linear dimension linked to that line. +- Select an arc or circle to create a radius or diameter dimension linked to that arc. +- Select two straight lines to create an angular dimension between them. +CTRL to snap, SHIFT to constrain, ALT to select an edge or arc. + +You may select a single line or single circular arc before launching this command +to create the corresponding linked dimension. +You may also select an 'App::MeasureDistance' object before launching this command +to turn it into a 'Draft Dimension' object. + Creates a dimension. + +- Pick three points to create a simple linear dimension. +- Select a straight line to create a linear dimension linked to that line. +- Select an arc or circle to create a radius or diameter dimension linked to that arc. +- Select two straight lines to create an angular dimension between them. +CTRL to snap, SHIFT to constrain, ALT to select an edge or arc. + +You may select a single line or single circular arc before launching this command +to create the corresponding linked dimension. +You may also select an 'App::MeasureDistance' object before launching this command +to turn it into a 'Draft Dimension' object. + + + + Draft_Stretch + + + Stretch + Stretch + + + + Stretches the selected objects. +Select an object, then draw a rectangle to pick the vertices that will be stretched, +then draw a line to specify the distance and direction of stretching. + Stretches the selected objects. +Select an object, then draw a rectangle to pick the vertices that will be stretched, +then draw a line to specify the distance and direction of stretching. + + + + Draft_Rectangle + + + Rectangle + Empat persegi panjang + + + + Creates a 2-point rectangle. CTRL to snap. + Creates a 2-point rectangle. CTRL to snap. + + + + Draft_Mirror + + + Mirror + Mirror + + + + Mirrors the selected objects along a line defined by two points. + Mirrors the selected objects along a line defined by two points. + + + + Draft_PathTwistedArray + + + Path twisted array + Path twisted array + + + + Creates copies of the selected object along a selected path, and twists the copies. +First select the object, and then select the path. +The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. + Creates copies of the selected object along a selected path, and twists the copies. +First select the object, and then select the path. +The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. + + + + Draft_PathTwistedLinkArray + + + Path twisted Link array + Path twisted Link array + + + + Like the PathTwistedArray tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Like the PathTwistedArray tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + + + + Draft_Clone + + + Clone + Klon + + + + Creates a clone of the selected objects. +The resulting clone can be scaled in each of its three directions. + Creates a clone of the selected objects. +The resulting clone can be scaled in each of its three directions. + + + + Draft_PolarArray + + + Polar array + Polar array + + + + Creates copies of the selected object, and places the copies in a polar pattern +defined by a center of rotation and its angle. + +The array can be turned into an orthogonal or a circular array by changing its type. + Creates copies of the selected object, and places the copies in a polar pattern +defined by a center of rotation and its angle. + +The array can be turned into an orthogonal or a circular array by changing its type. + + + + Draft_Slope + + + Set slope + Set slope + + + + Sets the slope of the selected line by changing the value of the Z value of one of its points. +If a polyline is selected, it will apply the slope transformation to each of its segments. + +The slope will always change the Z value, therefore this command only works well for +straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. + Sets the slope of the selected line by changing the value of the Z value of one of its points. +If a polyline is selected, it will apply the slope transformation to each of its segments. + +The slope will always change the Z value, therefore this command only works well for +straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. + + + + Draft_Upgrade + + + Upgrade + Upgrade + + + + Upgrades the selected objects into more complex shapes. +The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. +For example, it can join the selected objects into one, convert simple edges into parametric polylines, +convert closed edges into filled faces and parametric polygons, and merge faces into a single face. + Upgrades the selected objects into more complex shapes. +The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. +For example, it can join the selected objects into one, convert simple edges into parametric polylines, +convert closed edges into filled faces and parametric polygons, and merge faces into a single face. + + + + Draft_Offset + + + Offset + Mengimbangi + + + + Offsets of the selected object. +It can also create an offset copy of the original object. +CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + Offsets of the selected object. +It can also create an offset copy of the original object. +CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. + + + + Draft_Shape2DView + + + Shape 2D view + Shape 2D view + + + + Creates a 2D projection of the selected objects on the XY plane. +The initial projection direction is the negative of the current active view direction. +You can select individual faces to project, or the entire solid, and also include hidden lines. +These projections can be used to create technical drawings with the TechDraw Workbench. + Creates a 2D projection of the selected objects on the XY plane. +The initial projection direction is the negative of the current active view direction. +You can select individual faces to project, or the entire solid, and also include hidden lines. +These projections can be used to create technical drawings with the TechDraw Workbench. + + + + Draft_ShapeString + + + Shape from text + Shape from text + + + + Creates a shape from a text string by choosing a specific font and a placement. +The closed shapes can be used for extrusions and boolean operations. + Creates a shape from a text string by choosing a specific font and a placement. +The closed shapes can be used for extrusions and boolean operations. + + + + Draft_Heal + + + Heal + Heal + + + + Heal faulty Draft objects saved with an earlier version of the program. +If an object is selected it will try to heal that object in particular, +otherwise it will try to heal all objects in the active document. + Heal faulty Draft objects saved with an earlier version of the program. +If an object is selected it will try to heal that object in particular, +otherwise it will try to heal all objects in the active document. + + + + Draft_Downgrade + + + Downgrade + Downgrade + + + + Downgrades the selected objects into simpler shapes. +The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. +For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. + Downgrades the selected objects into simpler shapes. +The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. +For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. + + + + Draft_Array + + + Array + Array + + + + Creates an array from a selected object. +By default, it is a 2x2 orthogonal array. +Once the array is created its type can be changed +to polar or circular, and its properties can be modified. + Creates an array from a selected object. +By default, it is a 2x2 orthogonal array. +Once the array is created its type can be changed +to polar or circular, and its properties can be modified. + + + + Draft_LinkArray + + + LinkArray + LinkArray + + + + Like the Array tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Like the Array tool, but creates a 'Link array' instead. +A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + + + + App::Property + + + The placement of the base point of the first line + The placement of the base point of the first line + + + + The text displayed by this object. +It is a list of strings; each element in the list will be displayed in its own line. + The text displayed by this object. +It is a list of strings; each element in the list will be displayed in its own line. + + + + Text string + Text string + + + + Font file name + Font file name + + + + Height of text + Height of text + + + + Inter-character spacing + Inter-character spacing + + + + Fill letters with faces + Fill letters with faces + + + + The base object used by this object + The base object used by this object + + + + The PAT file used by this object + The PAT file used by this object + + + + The pattern name used by this object + The pattern name used by this object + + + + The pattern scale used by this object + The pattern scale used by this object + + + + The pattern rotation used by this object + The pattern rotation used by this object + + + + If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + + The objects included in this clone + The objects included in this clone + + + + The scale factor of this clone + The scale factor of this clone + + + + If Clones includes several objects, +set True for fusion or False for compound + If Clones includes several objects, +set True for fusion or False for compound + + + + Start angle of the arc + Start angle of the arc + + + + End angle of the arc (for a full circle, + give it same value as First Angle) + End angle of the arc (for a full circle, + give it same value as First Angle) + + + + Radius of the circle + Radius of the circle + + + + + + + Create a face + Create a face + + + + + + + + + The area of this object + The area of this object + + + + The objects that are part of this layer + The objects that are part of this layer + + + + Number of faces + Number of faces + + + + Radius of the control circle + Radius of the control circle + + + + How the polygon must be drawn from the control circle + How the polygon must be drawn from the control circle + + + + + + Radius to use to fillet the corners + Radius to use to fillet the corners + + + + + + Size of the chamfer to give to the corners + Size of the chamfer to give to the corners + + + + The base object that will be duplicated. + The base object that will be duplicated. + + + + + The object along which the copies will be distributed. It must contain 'Edges'. + The object along which the copies will be distributed. It must contain 'Edges'. + + + + Number of copies to create. + Number of copies to create. + + + + Rotation factor of the twisted array. + Rotation factor of the twisted array. + + + + + + + Show the individual array elements (only for Link arrays) + Show the individual array elements (only for Link arrays) + + + + The position of the tip of the leader line. +This point can be decorated with an arrow or another symbol. + The position of the tip of the leader line. +This point can be decorated with an arrow or another symbol. + + + + Object, and optionally subelement, whose properties will be displayed +as 'Text', depending on 'Label Type'. + +'Target' won't be used if 'Label Type' is set to 'Custom'. + Object, and optionally subelement, whose properties will be displayed +as 'Text', depending on 'Label Type'. + +'Target' won't be used if 'Label Type' is set to 'Custom'. + + + + The list of points defining the leader line; normally a list of three points. + +The first point should be the position of the text, that is, the 'Placement', +and the last point should be the tip of the line, that is, the 'Target Point'. +The middle point is calculated automatically depending on the chosen +'Straight Direction' and the 'Straight Distance' value and sign. + +If 'Straight Direction' is set to 'Custom', the 'Points' property +can be set as a list of arbitrary points. + The list of points defining the leader line; normally a list of three points. + +The first point should be the position of the text, that is, the 'Placement', +and the last point should be the tip of the line, that is, the 'Target Point'. +The middle point is calculated automatically depending on the chosen +'Straight Direction' and the 'Straight Distance' value and sign. + +If 'Straight Direction' is set to 'Custom', the 'Points' property +can be set as a list of arbitrary points. + + + + The direction of the straight segment of the leader line. + +If 'Custom' is chosen, the points of the leader can be specified by +assigning a custom list to the 'Points' attribute. + The direction of the straight segment of the leader line. + +If 'Custom' is chosen, the points of the leader can be specified by +assigning a custom list to the 'Points' attribute. + + + + The length of the straight segment of the leader line. + +This is an oriented distance; if it is negative, the line will be drawn +to the left or below the 'Text', otherwise to the right or above it, +depending on the value of 'Straight Direction'. + The length of the straight segment of the leader line. + +This is an oriented distance; if it is negative, the line will be drawn +to the left or below the 'Text', otherwise to the right or above it, +depending on the value of 'Straight Direction'. + + + + The placement of the 'Text' element in 3D space + The placement of the 'Text' element in 3D space + + + + The text to display when 'Label Type' is set to 'Custom' + The text to display when 'Label Type' is set to 'Custom' + + + + The text displayed by this label. + +This property is read-only, as the final text depends on 'Label Type', +and the object defined in 'Target'. +The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. + The text displayed by this label. + +This property is read-only, as the final text depends on 'Label Type', +and the object defined in 'Target'. +The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. + + + + The type of information displayed by this label. + +If 'Custom' is chosen, the contents of 'Custom Text' will be used. +For other types, the string will be calculated automatically from the object defined in 'Target'. +'Tag' and 'Material' only work for objects that have these properties, like Arch objects. + +For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', +or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. + The type of information displayed by this label. + +If 'Custom' is chosen, the contents of 'Custom Text' will be used. +For other types, the string will be calculated automatically from the object defined in 'Target'. +'Tag' and 'Material' only work for objects that have these properties, like Arch objects. + +For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', +or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. + + + + General scaling factor that affects the annotation consistently +because it scales the text, and the line decorations, if any, +in the same proportion. + General scaling factor that affects the annotation consistently +because it scales the text, and the line decorations, if any, +in the same proportion. + + + + Annotation style to apply to this object. +When using a saved style some of the view properties will become read-only; +they will only be editable by changing the style through the 'Annotation style editor' tool. + Annotation style to apply to this object. +When using a saved style some of the view properties will become read-only; +they will only be editable by changing the style through the 'Annotation style editor' tool. + + + + + The base object that will be duplicated + The base object that will be duplicated + + + + List of connected edges in the 'Path Object'. +If these are present, the copies will be created along these subelements only. +Leave this property empty to create copies along the entire 'Path Object'. + List of connected edges in the 'Path Object'. +If these are present, the copies will be created along these subelements only. +Leave this property empty to create copies along the entire 'Path Object'. + + + + Number of copies to create + Number of copies to create + + + + Additional translation that will be applied to each copy. +This is useful to adjust for the difference between shape centre and shape reference point. + Additional translation that will be applied to each copy. +This is useful to adjust for the difference between shape centre and shape reference point. + + + + Alignment vector for 'Tangent' mode + Alignment vector for 'Tangent' mode + + + + Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode + Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode + + + + Direction of the local Z axis when 'Force Vertical' is true + Direction of the local Z axis when 'Force Vertical' is true + + + + Method to orient the copies along the path. +- Original: X is curve tangent, Y is normal, and Z is the cross product. +- Frenet: aligns the object following the local coordinate system along the path. +- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. + +To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. + Method to orient the copies along the path. +- Original: X is curve tangent, Y is normal, and Z is the cross product. +- Frenet: aligns the object following the local coordinate system along the path. +- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. + +To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. + + + + Length from the start of the path to the first copy. + Length from the start of the path to the first copy. + + + + Length from the end of the path to the last copy. + Length from the end of the path to the last copy. + + + + Orient the copies along the path depending on the 'Align Mode'. +Otherwise the copies will have the same orientation as the original Base object. + Orient the copies along the path depending on the 'Align Mode'. +Otherwise the copies will have the same orientation as the original Base object. + + + + The type of array to create. +- Ortho: places the copies in the direction of the global X, Y, Z axes. +- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. +- Circular: places the copies in concentric circular layers around the base object. + The type of array to create. +- Ortho: places the copies in the direction of the global X, Y, Z axes. +- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. +- Circular: places the copies in concentric circular layers around the base object. + + + + Specifies if the copies should be fused together if they touch each other (slower) + Specifies if the copies should be fused together if they touch each other (slower) + + + + Number of copies in X direction + Number of copies in X direction + + + + Number of copies in Y direction + Number of copies in Y direction + + + + Number of copies in Z direction + Number of copies in Z direction + + + + Distance and orientation of intervals in X direction + Distance and orientation of intervals in X direction + + + + Distance and orientation of intervals in Y direction + Distance and orientation of intervals in Y direction + + + + Distance and orientation of intervals in Z direction + Distance and orientation of intervals in Z direction + + + + The axis direction around which the elements in a polar or a circular array will be created + The axis direction around which the elements in a polar or a circular array will be created + + + + Center point for polar and circular arrays. +The 'Axis' passes through this point. + Center point for polar and circular arrays. +The 'Axis' passes through this point. + + + + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. +Its placement, position and rotation, will be used when creating polar and circular arrays. +Leave this property empty to be able to set 'Axis' and 'Center' manually. + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. +Its placement, position and rotation, will be used when creating polar and circular arrays. +Leave this property empty to be able to set 'Axis' and 'Center' manually. + + + + Number of copies in the polar direction + Number of copies in the polar direction + + + + Distance and orientation of intervals in 'Axis' direction + Distance and orientation of intervals in 'Axis' direction + + + + Angle to cover with copies + Angle to cover with copies + + + + Distance between circular layers + Distance between circular layers + + + + Distance between copies in the same circular layer + Distance between copies in the same circular layer + + + + Number of circular layers. The 'Base' object counts as one layer. + Number of circular layers. The 'Base' object counts as one layer. + + + + A parameter that determines how many symmetry planes the circular array will have. + A parameter that determines how many symmetry planes the circular array will have. + + + + Total number of elements in the array. +This property is read-only, as the number depends on the parameters of the array. + Total number of elements in the array. +This property is read-only, as the number depends on the parameters of the array. + + + + Base object that will be duplicated + Base object that will be duplicated + + + + Object containing points used to distribute the copies. + Object containing points used to distribute the copies. + + + + Number of copies in the array. +This property is read-only, as the number depends on the points in 'Point Object'. + Number of copies in the array. +This property is read-only, as the number depends on the points in 'Point Object'. + + + + + Additional placement, shift and rotation, that will be applied to each copy + Additional placement, shift and rotation, that will be applied to each copy + + + + The base object this 2D view must represent + The base object this 2D view must represent + + + + The projection vector of this object + The projection vector of this object + + + + The way the viewed object must be projected + The way the viewed object must be projected + + + + The indices of the faces to be projected in Individual Faces mode + The indices of the faces to be projected in Individual Faces mode + + + + Show hidden lines + Tampilkan garis tersembunyi + + + + Fuse wall and structure objects of same type and material + Fuse wall and structure objects of same type and material + + + + Tessellate Ellipses and B-splines into line segments + Tessellate Ellipses and B-splines into line segments + + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will include only visible objects + If this is True, this object will include only visible objects + + + + A list of exclusion points. Any edge touching any of those points will not be drawn. + A list of exclusion points. Any edge touching any of those points will not be drawn. + + + + A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. + A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + + + + This object will be recomputed only if this is True. + This object will be recomputed only if this is True. + + + + The points of the Bezier curve + The points of the Bezier curve + + + + The degree of the Bezier function + The degree of the Bezier function + + + + Continuity + Lanjutkan + + + + If the Bezier curve should be closed or not + If the Bezier curve should be closed or not + + + + Create a face if this curve is closed + Create a face if this curve is closed + + + + The length of this object + The length of this object + + + + The placement of this object + The placement of this object + + + + X Location + X Location + + + + Y Location + Y Location + + + + Z Location + Z Location + + + + Start angle of the elliptical arc + Start angle of the elliptical arc + + + + End angle of the elliptical arc + + (for a full circle, give it same value as First Angle) + End angle of the elliptical arc + + (for a full circle, give it same value as First Angle) + + + + Minor radius of the ellipse + Minor radius of the ellipse + + + + Major radius of the ellipse + Major radius of the ellipse + + + + Area of this object + Area of this object + + + + The start point of this line. + The start point of this line. + + + + The end point of this line. + The end point of this line. + + + + The length of this line. + The length of this line. + + + + Radius to use to fillet the corner. + Radius to use to fillet the corner. + + + + The normal direction of the text of the dimension + The normal direction of the text of the dimension + + + + The object measured by this dimension object + The object measured by this dimension object + + + + The object, and specific subelements of it, +that this dimension object is measuring. + +There are various possibilities: +- An object, and one of its edges. +- An object, and two of its vertices. +- An arc object, and its edge. + The object, and specific subelements of it, +that this dimension object is measuring. + +There are various possibilities: +- An object, and one of its edges. +- An object, and two of its vertices. +- An arc object, and its edge. + + + + A point through which the dimension line, or an extrapolation of it, will pass. + +- For linear dimensions, this property controls how close the dimension line +is to the measured object. +- For radial dimensions, this controls the direction of the dimension line +that displays the measured radius or diameter. +- For angular dimensions, this controls the radius of the dimension arc +that displays the measured angle. + A point through which the dimension line, or an extrapolation of it, will pass. + +- For linear dimensions, this property controls how close the dimension line +is to the measured object. +- For radial dimensions, this controls the direction of the dimension line +that displays the measured radius or diameter. +- For angular dimensions, this controls the radius of the dimension arc +that displays the measured angle. + + + + Starting point of the dimension line. + +If it is a radius dimension it will be the center of the arc. +If it is a diameter dimension it will be a point that lies on the arc. + Starting point of the dimension line. + +If it is a radius dimension it will be the center of the arc. +If it is a diameter dimension it will be a point that lies on the arc. + + + + Ending point of the dimension line. + +If it is a radius or diameter dimension +it will be a point that lies on the arc. + Ending point of the dimension line. + +If it is a radius or diameter dimension +it will be a point that lies on the arc. + + + + The direction of the dimension line. +If this remains '(0,0,0)', the direction will be calculated automatically. + The direction of the dimension line. +If this remains '(0,0,0)', the direction will be calculated automatically. + + + + The value of the measurement. + +This property is read-only because the value is calculated +from the 'Start' and 'End' properties. + +If the 'Linked Geometry' is an arc or circle, this 'Distance' +is the radius or diameter, depending on the 'Diameter' property. + The value of the measurement. + +This property is read-only because the value is calculated +from the 'Start' and 'End' properties. + +If the 'Linked Geometry' is an arc or circle, this 'Distance' +is the radius or diameter, depending on the 'Diameter' property. + + + + When measuring circular arcs, it determines whether to display +the radius or the diameter value + When measuring circular arcs, it determines whether to display +the radius or the diameter value + + + + Starting angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + Starting angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + + + + Ending angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + Ending angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + + + + The center point of the dimension line, which is a circular arc. + +This is normally the point where two line segments, or their extensions +intersect, resulting in the measured 'Angle' between them. + The center point of the dimension line, which is a circular arc. + +This is normally the point where two line segments, or their extensions +intersect, resulting in the measured 'Angle' between them. + + + + The value of the measurement. + +This property is read-only because the value is calculated from +the 'First Angle' and 'Last Angle' properties. + The value of the measurement. + +This property is read-only because the value is calculated from +the 'First Angle' and 'Last Angle' properties. + + + + Length of the rectangle + Length of the rectangle + + + + Height of the rectangle + Height of the rectangle + + + + Horizontal subdivisions of this rectangle + Horizontal subdivisions of this rectangle + + + + Vertical subdivisions of this rectangle + Vertical subdivisions of this rectangle + + + + Linked faces + Linked faces + + + + Specifies if splitter lines must be removed + Specifies if splitter lines must be removed + + + + An optional extrusion value to be applied to all faces + An optional extrusion value to be applied to all faces + + + + An optional offset value to be applied to all faces + An optional offset value to be applied to all faces + + + + This specifies if the shapes sew + This specifies if the shapes sew + + + + The area of the faces of this Facebinder + The area of the faces of this Facebinder + + + + The components of this block + The components of this block + + + + The vertices of the wire + The vertices of the wire + + + + If the wire is closed or not + If the wire is closed or not + + + + The base object is the wire, it's formed from 2 objects + The base object is the wire, it's formed from 2 objects + + + + The tool object is the wire, it's formed from 2 objects + The tool object is the wire, it's formed from 2 objects + + + + The start point of this line + The start point of this line + + + + The end point of this line + The end point of this line + + + + The length of this line + The length of this line + + + + Create a face if this object is closed + Create a face if this object is closed + + + + The number of subdivisions of each edge + The number of subdivisions of each edge + + + + The points of the B-spline + The points of the B-spline + + + + If the B-spline is closed or not + If the B-spline is closed or not + + + + Create a face if this spline is closed + Create a face if this spline is closed + + + + Parameterization factor + Parameterization factor + + + + Force sync pattern placements even when array elements are expanded + Force sync pattern placements even when array elements are expanded + + + + Show the individual array elements + Show the individual array elements + + + + Text color + Text color + + + + + Line spacing (relative to font size) + Line spacing (relative to font size) + + + + Vertical alignment + Vertical alignment + + + + Maximum number of characters on each line of the text box + Maximum number of characters on each line of the text box + + + + + Horizontal alignment + Horizontal alignment + + + + The type of frame around the text of this object + The type of frame around the text of this object + + + + Display a leader line or not + Display a leader line or not + + + + Line width + Lebar garis + + + + Line color + Line warna + + + + Defines an SVG pattern. + Defines an SVG pattern. + + + + Defines the size of the SVG pattern. + Defines the size of the SVG pattern. + + + + If it is true, the objects contained within this layer will adopt the line color of the layer + If it is true, the objects contained within this layer will adopt the line color of the layer + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + + + + If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + + + + The line color of the objects contained within this layer + The line color of the objects contained within this layer + + + + The shape color of the objects contained within this layer + The shape color of the objects contained within this layer + + + + The line width of the objects contained within this layer + The line width of the objects contained within this layer + + + + The draw style of the objects contained within this layer + The draw style of the objects contained within this layer + + + + The transparency of the objects contained within this layer + The transparency of the objects contained within this layer + + + + The line color of the objects contained within this layer, when used on a TechDraw page + The line color of the objects contained within this layer, when used on a TechDraw page + + + + Font name + Nama font + + + + Font size + Ukuran huruf + + + + Spacing between text and dimension line + Spacing between text and dimension line + + + + Rotate the dimension text 180 degrees + Rotate the dimension text 180 degrees + + + + Text Position. +Leave '(0,0,0)' for automatic position + Text Position. +Leave '(0,0,0)' for automatic position + + + + Text override. +Write '$dim' so that it is replaced by the dimension length. + Text override. +Write '$dim' so that it is replaced by the dimension length. + + + + The number of decimals to show + The number of decimals to show + + + + Show the unit suffix + Show the unit suffix + + + + A unit to express the measurement. +Leave blank for system default. +Use 'arch' to force US arch notation + A unit to express the measurement. +Leave blank for system default. +Use 'arch' to force US arch notation + + + + + Arrow size + Panah ukuran + + + + + Arrow type + Jenis Panah + + + + Rotate the dimension arrows 180 degrees + Rotate the dimension arrows 180 degrees + + + + The distance the dimension line is extended +past the extension lines + The distance the dimension line is extended +past the extension lines + + + + Length of the extension lines + Length of the extension lines + + + + Length of the extension line +beyond the dimension line + Length of the extension line +beyond the dimension line + + + + Shows the dimension line and arrows + Shows the dimension line and arrows + + + + Command + + + + Transform + Transform + + + + Draft_LayerManager + + + Manage layers... + Manage layers... + + + + Set/modify the different layers of this document + Set/modify the different layers of this document + + diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 14362993d6..0cd3109e24 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -62,7 +62,7 @@ Toggle on/off - Toggle on/off + Attiva/Disattiva @@ -5565,7 +5565,7 @@ dal menu Strumenti -> Addon Manager Face color - Face color + Colore faccia @@ -7100,7 +7100,7 @@ imposta 'Vero' se il risultato è una fusione o 'Falso' se è un composto Show the individual array elements (only for Link arrays) - Show the individual array elements (only for Link arrays) + Mostra i singoli elementi della serie (solo per le serie di link) diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index ef40d125fe..9e815439cf 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + ფენების მმართველი @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + ჩართ/გამორთ გადართვა Isolate - Isolate + იზოლირება @@ -3061,7 +3061,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + მარკირების ტიპი @@ -3203,16 +3203,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + შეცდომა DWG-ის კონვერტაციის დროს. სცადეთ გადაიტანოთ DWG ფაილი დირექტორიაში სახელით ჰარეეების და არაინგლისური სიმბოლოების გარეშე, ან სცადეთ შენახვა DWG-ის ფორმატის უფრო ძველ ვერსიაში. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + შესაფერისი DWG გადამყვანი ვერ ვიპოვე. +დააყენეთ ხელით მენიუში ჩასწორება->მორგება->შეტანა/გამოტანა->DWG @@ -4657,12 +4655,12 @@ The final angle will be the base angle plus this amount. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + საწყისი წანაცვლება ბილიკის სიგრძისთვის მეტისმეტად დიდია. გამოიყენება 0. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + საბოლოო წანაცვლება ძალიან დიდია ბილიკის სიგრძეს მინუს საწყისი წანაცვლება. გამოიყენება 0. @@ -5539,7 +5537,7 @@ from menu Tools -> Addon Manager On - On + ჩართ @@ -5564,7 +5562,7 @@ from menu Tools -> Addon Manager Face color - Face color + ზედაპირის ფერი @@ -5574,12 +5572,12 @@ from menu Tools -> Addon Manager Line print color - Line print color + ხაზის ბეჭდვის ფერი New Layer - New Layer + ახალი ფენა @@ -7282,12 +7280,12 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + სიგრძე ბილიკის დასაწყისიდან პირველ ასლამდე. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + სიგრძე ბილიკის ბოლოდან უკანასკნელ ასლამდე. @@ -8077,12 +8075,12 @@ beyond the dimension line Manage layers... - Manage layers... + ფენების მართვა... Set/modify the different layers of this document - Set/modify the different layers of this document + ამ დოკუმენტის სხვადასხვა ფენების დაყენება/შეცვლა diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index e54625789b..22efde2a9b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Laag beheerder @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + In-/ uitschakelen Isolate - Isolate + Isoleer @@ -109,29 +109,29 @@ The font size in system units - The font size in system units + De lettergrootte in de systeem eenheden The line spacing (relative to the font size) - The line spacing (relative to the font size) + De regelafstand (ten opzichte van de lettergrootte) Lines and arrows - Lines and arrows + Lijnen en pijlen Show line - Show line + Toon lijn The width of the lines - The width of the lines + De lijndikte @@ -142,30 +142,30 @@ The type of arrows or markers to use for dimensions and labels - The type of arrows or markers to use for dimensions and labels + Het type pijlen of markeringen om te gebruiken voor afmetingen en labels The size of the arrows or markers in system units - The size of the arrows or markers in system units + De grootte van de pijlen of markers in systeemeenheden The color of lines and arrows - The color of lines and arrows + De kleur van lijnen en pijlen Line and arrow color - Line and arrow color + Lijn en pijl kleur The distance the dimension line is additionally extended - The distance the dimension line is additionally extended + De afstand die de maatlijn extra wordt uitgebreid @@ -3063,7 +3063,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Tekst type @@ -3205,9 +3205,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Fout tijdens DWG-conversie. Probeer het DWG-bestand te verplaatsen naar een map zonder spaties en niet-dubieuze tekens of probeer op te slaan in een lagere DWG-versie. @@ -5542,7 +5540,7 @@ from menu Tools -> Addon Manager On - On + Aan @@ -5582,7 +5580,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Nieuwe Laag diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 6156122cde..a5e513bbeb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Menedżer warstw @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Włącz / wyłącz Isolate - Isolate + Izoluj @@ -2988,7 +2988,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - Jeśli opcja jest zaznaczona, obiekty będą kopiowane, a nie przenoszone. Preferencje -> Rysunek Roboczy-> Globalny tryb kopiowania, opcja ta umożliwia zachowanie tego trybu w następnych poleceniach + Jeśli opcja jest zaznaczona, obiekty będą kopiowane, a nie przenoszone. Preferencje -> Rysunek Roboczy-> Ustawienia ogólne -> Tryb kopiowania globalny, opcja ta umożliwia zachowanie tego trybu w następnych poleceniach @@ -3075,7 +3075,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Label type - Label type + Typ etykiety @@ -3217,16 +3217,16 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Błąd podczas konwersji DWG. +Spróbuj przenieść plik DWG do katalogu ze ścieżką bez spacji i znaków innych niż angielskie +lub spróbuj zapisać do niższej wersji DWG. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Nie znaleziono odpowiedniego konwertera DWG. +Proszę ustawić go ręcznie w menu Edytuj -> Preferencje -> Import / Eksport -> DWG @@ -4671,12 +4671,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Rozpoczęcie odsunięcia zbyt duże dla długości ścieżki. Zamiast tego użyj zera. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Zakończenie odsunięcia zbyt duże dla długości ścieżki pomniejszonej o rozpoczęcie odsunięcia. Zamiast tego użyj zera. @@ -5552,7 +5552,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene On - On + Włącz @@ -5577,7 +5577,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene Face color - Face color + Kolor powierzchni @@ -5587,12 +5587,12 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene Line print color - Line print color + Kolor linii na wydruku New Layer - New Layer + Nowa warstwa @@ -7303,12 +7303,12 @@ Aby uzyskać lepsze wyniki w trybach „Oryginal” i „Tangent”, najprawdopo Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Długość od początku ścieżki do pierwszej kopii. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Długość od końca ścieżki do ostatniej kopii. @@ -8100,12 +8100,12 @@ beyond the dimension line Manage layers... - Manage layers... + Zarządzaj warstwami ... Set/modify the different layers of this document - Set/modify the different layers of this document + Ustaw / zmodyfikuj różne warstwy w dokumencie diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 60d0b9aef4..6b4c184817 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Gerenciador de camadas @@ -3057,7 +3057,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Tipo de etiqueta @@ -5536,7 +5536,7 @@ from menu Tools -> Addon Manager On - On + Ativo @@ -5561,7 +5561,7 @@ from menu Tools -> Addon Manager Face color - Face color + Cor do rosto diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index fc38c82706..bb0818bc92 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -3094,7 +3094,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Trimex - Trimex + Trimex @@ -4231,7 +4231,7 @@ The final angle will be the base angle plus this amount. Construction mode - Construction mode + Mod de constructie @@ -4736,7 +4736,7 @@ The final angle will be the base angle plus this amount. Segment - Segment + Segment @@ -6360,7 +6360,7 @@ It works best when choosing a point on a straight segment and not a corner verte Trimex - Trimex + Trimex @@ -6829,7 +6829,7 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each Shape 2D view - Shape 2D view + Vizualizare forma 2D @@ -6848,7 +6848,7 @@ These projections can be used to create technical drawings with the TechDraw Wor Shape from text - Shape from text + Formă din text diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index ec60bd53d1..f178205bcc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Менеджер слоев @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Переключить вкл.\выкл Isolate - Isolate + ‎Изолировать‎ @@ -3047,7 +3047,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Тип метки @@ -3189,16 +3189,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Ошибка во время преобразования DWG. Попробуйте переместить файл DWG в путь к каталогу без пробелов и неанглийских символов или попробуйте сохранить его в более ранней версии DWG. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Не найдено подходящих конвертеров DWG. +Пожалуйста, установите один вручную в меню Изменить -> Настройки -> Импорт/Экспорт -> DWG @@ -4643,12 +4641,12 @@ The final angle will be the base angle plus this amount. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Начальное смещение слишком велико для длины пути. Вместо этого используется ноль. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Конечное смещение слишком велико для длины пути минус начало. Вместо этого используется ноль. @@ -5523,7 +5521,7 @@ from menu Tools -> Addon Manager On - On + Включить @@ -5548,7 +5546,7 @@ from menu Tools -> Addon Manager Face color - Face color + Цвет грани @@ -5558,12 +5556,12 @@ from menu Tools -> Addon Manager Line print color - Line print color + Цвет печати строк New Layer - New Layer + Новый слой @@ -7262,12 +7260,12 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Длина от начала пути до первой копии. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Длина от конца пути к последней копии. @@ -8058,12 +8056,12 @@ beyond the dimension line Manage layers... - Manage layers... + Управление слоями... Set/modify the different layers of this document - Set/modify the different layers of this document + Установить/изменить различные слои этого документа diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index 2591660ae6..91e3c16788 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Upravljalnik plasti @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Vklopi/Izklopi Isolate - Isolate + Osami @@ -3067,7 +3067,7 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Label type - Label type + Vrsta oznak @@ -3209,16 +3209,16 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Napaka med pretvarjanjem DWGja. +Poskusite prestaviti datoteko DWG v mapo, katere pot ne vsebuje presledkov in neangleških znakov +ali poskusite shraniti v starejšo različico DWGja. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Ni bilo mogoče najti nobenega ustreznega DWG pretvornika. Ročno ga določite preko menija Uredi -> +Prednastavitve -> Uvoz/Izvoz -> DWG @@ -4664,12 +4664,12 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Začetni zamik prevelik glede na dolžino poti. Upoštevan bo zamik nič. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Končni zamik prevelik glede na dolžino poti minus začetn zamik. Upoštevan bo zamik nič. @@ -5546,7 +5546,7 @@ z menija Orodja -> Upravljalnik vstavkov On - On + Prižgano @@ -5571,7 +5571,7 @@ z menija Orodja -> Upravljalnik vstavkov Face color - Face color + Barve ploskev @@ -5581,12 +5581,12 @@ z menija Orodja -> Upravljalnik vstavkov Line print color - Line print color + Barva tiskanja črt New Layer - New Layer + Nova plast @@ -7292,12 +7292,12 @@ Za boljše rezultate pri "Izvirnem" in "Dotikalnem" načinu boste najverjetneje Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Razdalja od začetka poti do prvega dvojnika. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Razdalja od konca poti do zadnjega dvojnika. @@ -8086,12 +8086,12 @@ preko kotnice Manage layers... - Manage layers... + Upravljanje plasti ... Set/modify the different layers of this document - Set/modify the different layers of this document + Nastavi/spremeni različne plasti tega dokumenta diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts index 16df0219c3..ae179b3c1f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Menadžer slojeva @@ -62,7 +62,7 @@ Toggle on/off - Toggle on/off + Uključi/isključi @@ -3064,7 +3064,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Label type - Label type + Vrsta oznake @@ -3206,16 +3206,14 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Greška tokom DWG konverzije. Pokušaj da premestiš DWG datoteku u fasciklu koja ima putanju bez razmaka i ne-engleskih znakova, ili pokušaj da sačuvaš u nižoj DWG verziji. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Nije pronađen odgovarajući DWG konvertor. +Možeš podesiti neki ručno u meniju Uredi -> Podešavanja -> Import/Ekport -> DWG @@ -4661,12 +4659,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Početni odmak je prevelik za dužinu putanje. Koristi nulu umesto. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Krajnji odmak je prevelik za razliku između dužine putanje i početnog odmaka. Koristi nulu umesto. @@ -5543,7 +5541,7 @@ iz menija Alati/Menadžer dodataka On - On + Uključeno @@ -5568,7 +5566,7 @@ iz menija Alati/Menadžer dodataka Face color - Face color + Boja stranice @@ -5578,12 +5576,12 @@ iz menija Alati/Menadžer dodataka Line print color - Line print color + Boja štampane linije New Layer - New Layer + Novi sloj @@ -7290,12 +7288,12 @@ Da bi dobio bolje rezultate sa 'Original' ili 'Tangent', možda ćeš morati da Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Dužina od početka putanje do prve kopije. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Dužina od kraja putanje do zadnje kopije. @@ -8088,12 +8086,12 @@ iznad kotne linije Manage layers... - Manage layers... + Upravljaj slojevima... Set/modify the different layers of this document - Set/modify the different layers of this document + Podesi/izmeni različite slojeve ovog dokumenta diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 48905ec43d..81df1fe02e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Менаџер слојева @@ -62,7 +62,7 @@ Toggle on/off - Toggle on/off + Укључи/искључи @@ -3064,7 +3064,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Врста ознаке @@ -3206,16 +3206,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Грешка током DWG конверзијe. Покушај да преместиш DWG датотеку у фасциклу која има путању без размака и не-енглеских знакова, или покушај да сачуваш у нижој DWG верзији. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Није пронађен одговарајући DWG конвертор. +Можеш подесити неки ручно у менију Уреди -> Подешавања -> Импорт/Екпорт -> DWG @@ -4661,12 +4659,12 @@ The final angle will be the base angle plus this amount. Start Offset too large for path length. Using zero instead. - Start Offset too large for path length. Using zero instead. + Почетни одмак је превелик за дужину путање. Користи нулу уместо. End Offset too large for path length minus Start Offset. Using zero instead. - End Offset too large for path length minus Start Offset. Using zero instead. + Крајњи одмак је превелик за разлику између дужине путање и почетног одмака. Користи нулу уместо. @@ -5543,7 +5541,7 @@ from menu Tools -> Addon Manager On - On + Укључено @@ -5568,7 +5566,7 @@ from menu Tools -> Addon Manager Face color - Face color + Боја странице @@ -5578,12 +5576,12 @@ from menu Tools -> Addon Manager Line print color - Line print color + Боја штампане линије New Layer - New Layer + Нови слој @@ -7290,12 +7288,12 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Length from the start of the path to the first copy. - Length from the start of the path to the first copy. + Дужина од почетка путање до прве копије. Length from the end of the path to the last copy. - Length from the end of the path to the last copy. + Дужина од краја путање до задње копије. @@ -8088,12 +8086,12 @@ beyond the dimension line Manage layers... - Manage layers... + Управљај слојевима... Set/modify the different layers of this document - Set/modify the different layers of this document + Подеси/измени различите слојеве овог документа diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index a9608ec157..ade6cbc9eb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Lagerhanterare @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + Växla på/av Isolate - Isolate + Isolera @@ -115,23 +115,23 @@ The line spacing (relative to the font size) - The line spacing (relative to the font size) + Radavståndet (relativt för teckenstorlek) Lines and arrows - Lines and arrows + Rader och pilar Show line - Show line + Visa rad The width of the lines - The width of the lines + Radernas bredd @@ -154,7 +154,7 @@ The color of lines and arrows - The color of lines and arrows + Radernas och pilarnas färger @@ -1467,7 +1467,7 @@ Observera att detta inte stöds fullt ut, och många objekt kommer inte att kunn The default size for SVG patterns - The default size for SVG patterns + Standard-storleken för SVG-mönster @@ -1587,7 +1587,7 @@ som "Arial:Bold" Screen - Screen + Skärm @@ -2256,7 +2256,7 @@ This might fail for post DXF R12 templates. Show human figure - Show human figure + Visa människofigur @@ -2361,7 +2361,7 @@ This might fail for post DXF R12 templates. Conversion method: - Conversion method: + Konverteringsmetod: @@ -2376,22 +2376,22 @@ This might fail for post DXF R12 templates. LibreDWG - LibreDWG + LibreDWG ODA Converter - ODA Converter + ODA-konverterare QCAD pro - QCAD pro + QCAD-proffs Path to file converter - Path to file converter + Genväg till filkonverteraren @@ -2716,7 +2716,7 @@ This might fail for post DXF R12 templates. Select edge - Select edge + Välj kant @@ -2726,7 +2726,7 @@ This might fail for post DXF R12 templates. Length mode - Length mode + Längdläge @@ -2747,7 +2747,7 @@ This might fail for post DXF R12 templates. Undo last segment - Undo last segment + Ångra senaste segmentet @@ -2788,7 +2788,7 @@ This might fail for post DXF R12 templates. active command: - active command: + aktivt kommando: @@ -3059,7 +3059,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Typ av etikett @@ -3201,16 +3201,16 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + Fel under DWG-konvertering. +Prova att flytta DWG-filen till en sökväg utan mellanslag och icke-engelska tecken, +eller försök spara till en lägre DWG-version. No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + Ingen lämplig DWG-omvandlare har hittats. +Ställ in en manuellt under menyn Redigera -> Inställningar -> Importera/exportera -> DWG @@ -5538,7 +5538,7 @@ from menu Tools -> Addon Manager On - On + På @@ -5563,7 +5563,7 @@ from menu Tools -> Addon Manager Face color - Face color + Ytfärger @@ -5578,7 +5578,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Nytt lager @@ -8086,7 +8086,7 @@ beyond the dimension line Manage layers... - Manage layers... + Hantera lager... diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index e2d82c701b..9633d7a402 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + Менеджер шарів @@ -3067,7 +3067,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + Тип позначки @@ -5586,7 +5586,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Новий шар @@ -8094,7 +8094,7 @@ beyond the dimension line Manage layers... - Manage layers... + Керування шарами... diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 98d90a44ea..a75f90ab35 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + 图层管理器 @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + 切换开/关 Isolate - Isolate + 隔离 @@ -3061,7 +3061,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Label type - Label type + 标签类型 @@ -3203,16 +3203,16 @@ Not available if Draft preference option 'Use Part Primitives' is enabledError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. - Error during DWG conversion. -Try moving the DWG file to a directory path without spaces and non-english characters, -or try saving to a lower DWG version. + DWG 转换过程中出错。 +尝试将 DWG 文件移动到没有空格的纯英文字符的目录路径， +或尝试保存到 DWG 的较低版本。 No suitable DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG - No suitable DWG converter has been found. -Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG + 找不到合适的 DWG 转换器。 +请在菜单的编辑 -> 首选项 -> 导入/导出 -> DWG 手动设置一个 diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 566e5fb0ab..e227487ba0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -62,12 +62,12 @@ Toggle on/off - Toggle on/off + 切換開/關 Isolate - Isolate + 隔離 @@ -2764,7 +2764,7 @@ This might fail for post DXF R12 templates. Front - 前視圖 + 正視圖 @@ -3041,7 +3041,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Arc - 弧 + 圓弧 @@ -5539,7 +5539,7 @@ from menu Tools -> Addon Manager On - On + 開 @@ -6006,7 +6006,7 @@ CTRL to snap, SHIFT to constrain. Arc - 弧 + 圓弧 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index 3416955fe0..e26c115bbc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -11,12 +11,12 @@ Constraint bearing - Constraint bearing + Vazba omezení Creates a FEM constraint for a bearing - Creates a FEM constraint for a bearing + Vytvoří MKP vazbu pro ložisko @@ -29,12 +29,12 @@ Constraint contact - Constraint contact + Barva vazeb Creates a FEM constraint for contact between faces - Creates a FEM constraint for contact between faces + Vytvoří MKP vazbu pro kontakt mezi plochami @@ -47,12 +47,12 @@ Constraint displacement - Constraint displacement + Posunutí omezení Creates a FEM constraint for a displacement acting on a geometric entity - Creates a FEM constraint for a displacement acting on a geometric entity + Vytvoří MKP vazbu pro sílu působící na geometrickou entitu @@ -65,12 +65,12 @@ Constraint fixed - Constraint fixed + Omezení pevná Creates a FEM constraint for a fixed geometric entity - Creates a FEM constraint for a fixed geometric entity + Vytvoří MKP vazbu pro pevnou geometrickou entitu @@ -83,12 +83,12 @@ Fluid boundary condition - Fluid boundary condition + Mezní stav kapaliny Create fluid boundary condition on face entity for Computional Fluid Dynamics - Create fluid boundary condition on face entity for Computional Fluid Dynamics + Vytvořte okrajovou podmínku tekutiny na entitě plochy pro výpočetní dynamiku tekutin @@ -173,7 +173,7 @@ Constraint plane rotation - Constraint plane rotation + Podmínka rotace roviny @@ -191,7 +191,7 @@ Constraint pressure - Constraint pressure + Omezení tlaku @@ -3673,12 +3673,12 @@ Note: for 2D only setting for x is possible, Constraint displacement - Constraint displacement + Posunutí omezení Constraint fixed - Constraint fixed + Omezení pevná @@ -3703,7 +3703,7 @@ Note: for 2D only setting for x is possible, Constraint pressure - Constraint pressure + Omezení tlaku diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 6b19163a62..69d35fc85b 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -787,12 +787,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Erstellt eine Zylinderfunktion, die durch Mittelpunkt, Achse und Radius definiert wird Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Erstellt eine Quaderfunktion, die durch Mittelpunkt, Länge, Breite und Höhe definiert wird @@ -3315,7 +3315,7 @@ Note: has no effect if a solid was selected formula - formula + Formel @@ -3393,7 +3393,7 @@ Note: has no effect if a solid was selected Current density: - Aktuelle Dichte: + Stromdichte: @@ -4393,7 +4393,7 @@ for the Emer solver Formula - Formula + Formel @@ -4798,14 +4798,14 @@ Normalenvektors der Fläche wird als Richtung verwendet Stiffness for Elmer - Stiffness for Elmer + Steifigkeit für Elmer What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Welche Steifigkeit sollte +für den Löser Elmer verwendet werden @@ -5496,7 +5496,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Erstellt einen Analysecontainer mit Standard-Löser @@ -5727,8 +5727,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Erstellt eine FEM-Gleichung für + Elastizität (Spannung) @@ -5810,12 +5810,12 @@ used for the Elmer solver Material for fluid - Material for fluid + Werkstoff für Fluide Creates a FEM material for fluid - Creates a FEM material for fluid + Erstellt einen FEM-Werkstoff für Fluide (Gase und Flüssigkeiten) @@ -5836,12 +5836,12 @@ used for the Elmer solver Reinforced material (concrete) - Reinforced material (concrete) + Bewehrter Werkstoff (Beton) Creates a material for reinforced matrix material such as concrete - Creates a material for reinforced matrix material such as concrete + Erstellt einen Werkstoff für bewehrte Verbundwerkstoffe wie z.B. Beton @@ -5849,12 +5849,12 @@ used for the Elmer solver Material for solid - Material for solid + Werkstoff für Festkörper Creates a FEM material for solid - Creates a FEM material for solid + Erstellt einen FEM-Werkstoff für Festkörper @@ -6301,12 +6301,12 @@ Please select a result type first. Constraint current density - Randbedingung Aktuelle Dichte + Randbedingung Stromdichte Creates a FEM constraint current density - Erstellt eine FEM-Randbedingung Aktuelle Dichte + Erstellt eine FEM-Randbedingung Stromdichte @@ -6443,14 +6443,14 @@ Please select a result type first. Deformation equation - Deformation equation + Verformungsgleichung Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + Erstellt eine FEM-Gleichung für + Verformung (nichtlineare Elastizität) @@ -6544,12 +6544,12 @@ Please select a result type first. Mechanical equations - Mechanical equations + Mechanische Gleichungen Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Mechanische Gleichungen für den Gleichungslöser Elmer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index 66b1d49cd9..b6a02f410c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -1313,8 +1313,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + El diálogo de resultados se abrirá +con los últimos ajustes de diálogo usados @@ -1325,8 +1325,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Todas las restricciones se ocultan en la vista del modelo +cuando se abre el diálogo de resultados @@ -1341,7 +1341,7 @@ when the results dialog is opened Default solver - Default solver + Solucionador por defecto @@ -3336,7 +3336,7 @@ Note: has no effect if a solid was selected formula - formula + fórmula @@ -3496,7 +3496,7 @@ Note: for 2D only setting for x is possible, Normal to boundary - Normal to boundary + Normal al límite @@ -4414,7 +4414,7 @@ for the Emer solver Formula - Formula + Fórmula @@ -4819,7 +4819,7 @@ normal de la cara se utiliza como dirección Stiffness for Elmer - Stiffness for Elmer + Rigidez por Elmer @@ -5748,8 +5748,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Crea una ecuación FEM para +elasticidad (estrés) @@ -6464,7 +6464,7 @@ Por favor, primero seleccione un tipo de resultado. Deformation equation - Deformation equation + Ecuación de deformación @@ -6565,12 +6565,12 @@ Por favor, primero seleccione un tipo de resultado. Mechanical equations - Mechanical equations + Ecuaciones mecánicas Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Ecuaciones mecánicas para el solucionador Elmer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index f21407205d..e521fdaba1 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -1313,8 +1313,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + El diálogo de resultados se abrirá +con los últimos ajustes de diálogo usados @@ -1325,8 +1325,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Todas las restricciones se ocultan en la vista del modelo +cuando se abre el diálogo de resultados @@ -1341,7 +1341,7 @@ when the results dialog is opened Default solver - Default solver + Solucionador por defecto @@ -3336,7 +3336,7 @@ Note: has no effect if a solid was selected formula - formula + fórmula @@ -3496,7 +3496,7 @@ Note: for 2D only setting for x is possible, Normal to boundary - Normal to boundary + Normal al límite @@ -4414,7 +4414,7 @@ for the Emer solver Formula - Formula + Fórmula @@ -4819,7 +4819,7 @@ normal de la cara se utiliza como dirección Stiffness for Elmer - Stiffness for Elmer + Rigidez por Elmer @@ -5748,8 +5748,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Crea una ecuación FEM para +elasticidad (estrés) @@ -6464,7 +6464,7 @@ Por favor, primero seleccione un tipo de resultado. Deformation equation - Deformation equation + Ecuación de deformación @@ -6565,12 +6565,12 @@ Por favor, primero seleccione un tipo de resultado. Mechanical equations - Mechanical equations + Ecuaciones mecánicas Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Ecuaciones mecánicas para el solucionador Elmer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 8247ef48fb..49b929f4d6 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -788,12 +788,12 @@ hasierako tenperatura: Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Sortu zilindro-funtzioa, bere zentroa, ardatza eta erradioa abiapuntutzat hartuta Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Sortu koadro-funtzioa, bere zentroa, luzera, zabalera eta altuera abiapuntutzat hartuta @@ -1315,8 +1315,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + Emaitzen elkarrizketa-koadroa erabilitako +azken ezarpenekin irekiko da @@ -1327,8 +1327,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Emaitzen elkarrizketa-koadroa irekitzen denean, +murrizketa guztiak ezkutatuta daude eredu-bistan @@ -1343,14 +1343,14 @@ when the results dialog is opened Default solver - Default solver + Ebazle lehenetsia Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + Analisi-edukiontzi bat gehitzean +gehituko den ebazle lehenetsia @@ -3338,7 +3338,7 @@ Oharra: ez du eraginik solido bat hautatu bada formula - formula + formula @@ -3498,7 +3498,7 @@ Oharra: 2D kasuetan soilik, X-en ezarpena posible da, Normal to boundary - Normal to boundary + Normala mugara @@ -4408,15 +4408,15 @@ Balizko aldagaietarako, ikusi beheko deskribapen-koadroa. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + Formulak Emer ebazlerako +soilik dira baliozkoak Formula - Formula + Formula @@ -4447,7 +4447,7 @@ generated by the flow Surface force by flow - Surface force by flow + Gainazal-indarra flulxuaren arabera @@ -4821,14 +4821,14 @@ norabidea erabiliko da norabide gisa Stiffness for Elmer - Stiffness for Elmer + Zurruntasuna Elmer ebazlerako What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Zein zurruntasun erabiliko den +Elmer ebazlean @@ -5519,7 +5519,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Analisi-edukiontzia sortzen du ebazle lehenetsiarekin @@ -5750,8 +5750,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + FEM ekuazio bat sortzen du +elastikotasunerako (estreserako) @@ -6205,7 +6205,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Sakatu 'Gehitu' eta hautatu elementu geometrikoak, haiek zerrendari gehitzeko.{} Honako geometria-elementuak hautatu daitezke: {}{}{} @@ -6466,14 +6466,14 @@ indar magnetodinamikoetarako Deformation equation - Deformation equation + Deformazio-ekuazioa Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + FEM ekuazio bat sortzen du +deformaziorako (elastikotasun ez linealerako) @@ -6567,12 +6567,12 @@ indar magnetodinamikoetarako Mechanical equations - Mechanical equations + Ekuazio mekanikoak Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Elmer ebazlerako ekuazio mekanikoak diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index dc1157cfda..79f3d03c6b 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -788,12 +788,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Créer une fonction cylindre, définie par son centre, son axe et son rayon Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Créer une fonction boîte, définie par son centre, sa longueur, sa largeur et sa hauteur @@ -1305,8 +1305,8 @@ Créer votre propre sous-répertoire pour chaque solveur. Nommer le répertoire Existing result objects will be kept otherwise overwritten by new solver run - Existing result objects will be kept -otherwise overwritten by new solver run + Les objets de résultat existants seront conservés sinon, +ils seront écrasés par une nouvelle exécution du solveur @@ -1317,8 +1317,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + La boîte de dialogue des résultats s'ouvre avec les +derniers paramètres de la boîte de dialogue utilisés @@ -1329,8 +1329,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Toutes les contraintes sont cachées dans la vue du modèle +lorsque la boîte de dialogue des résultats est ouverte @@ -1345,14 +1345,13 @@ when the results dialog is opened Default solver - Default solver + Solveur par défaut Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + Solveur par défaut à ajouter lors de l'ajout d'un conteneur d'analyse @@ -3336,7 +3335,7 @@ Remarque : n'a pas d'effet si un solide a été sélectionné formula - formula + formule @@ -3496,7 +3495,7 @@ Remarque : pour la 2D, seule le réglage en x est possible, Normal to boundary - Normal to boundary + Normal à la limite @@ -4406,15 +4405,14 @@ Pour les variables possibles, voir la zone de description ci-dessous. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + Les formules ne sont valables que pour le solveur Emer Formula - Formula + Formule @@ -4437,15 +4435,13 @@ for the Emer solver surface force (and thus displacement) generated by the flow (Option only applies for Elmer solver) - Flow solution is used to determine -surface force (and thus displacement) -generated by the flow -(Option only applies for Elmer solver) + La solution d'écoulement est utilisée pour déterminer la force de surface (et donc le déplacement) +générée par l'écoulement (l'option ne s'applique qu'au solveur Elmer) Surface force by flow - Surface force by flow + Force de surface par l'écoulement @@ -4819,14 +4815,13 @@ vecteur normal de la face est utilisée comme sens Stiffness for Elmer - Stiffness for Elmer + Raideur pour Elmer What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Quelle raideur devrait être utilisée pour le solveur Elmer @@ -5517,7 +5512,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Crée un conteneur d’analyse avec le solveur standard @@ -5525,7 +5520,7 @@ used for the Elmer solver Clipping plane on face - Plan de coupe sur la face + Plan de coupe par une face @@ -5748,8 +5743,7 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Crée une équation FEM pour l'élasticité (contrainte) @@ -5788,7 +5782,7 @@ used for the Elmer solver Creates a FEM equation for electric forces - Crée une équation FEM pour les forces électriques + Crée une équation FEM pour des forces électriques @@ -6203,7 +6197,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Cliquer sur "Ajouter" et sélectionner les éléments géométriques pour les ajouter à la liste. {}Les éléments géométriques suivants peuvent être sélectionnés : {}{}{} @@ -6341,8 +6335,7 @@ Veuillez d'abord sélectionner un type de résultat. Creates a FEM equation for 2D magnetodynamic forces - Crée une équation FEM pour des -forces magnétodynamiques 2D + Crée une équation FEM pour des forces magnétodynamiques 2D @@ -6383,8 +6376,7 @@ forces magnétodynamiques 2D Creates a FEM equation for magnetodynamic forces - Crée une équation FEM pour des -forces magnétodynamiques + Crée une équation FEM pour des forces magnétodynamiques @@ -6464,14 +6456,13 @@ forces magnétodynamiques Deformation equation - Deformation equation + Équation de déformation Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + Crée une équation FEM pour une déformation (élasticité non linéaire) @@ -6565,12 +6556,12 @@ forces magnétodynamiques Mechanical equations - Mechanical equations + Équations mécaniques Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Équations mécaniques pour le solveur Elmer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 896ab4f92f..b276021b17 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -788,12 +788,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Hengerfüggvény létrehozása, amelyet a középpontja, tengelye és sugara határoz meg Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Hozzon létre egy doboz funkciót, amelyet a középpontja, hossza, szélessége és magassága határoz meg @@ -1296,8 +1296,8 @@ constraint or material is applied. Existing result objects will be kept otherwise overwritten by new solver run - Existing result objects will be kept -otherwise overwritten by new solver run + Meglévő tárgy eredmények megmaradnak, +egyébként felülírja az új megoldó futtatásával @@ -1308,8 +1308,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + Megnyílik az eredmények párbeszédpanel +az utoljára használt párbeszédpanel beállításaival @@ -1320,8 +1320,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Összes kényszerítés elrejtett a modell nézetben +az eredmények párbeszédpanel megnyitásakor @@ -1336,14 +1336,14 @@ when the results dialog is opened Default solver - Default solver + Alapértelmezett megoldó Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + Alapértelmezett megoldó, amelyet hozzá kell adni, az +elemzési konténer hozzáadásakor @@ -3324,7 +3324,7 @@ Megjegyzés: nincs hatása, ha szilárdtestet választottunk ki formula - formula + képlet @@ -3484,7 +3484,7 @@ Megjegyzés: 2D esetén csak az x beállítása lehetséges, Normal to boundary - Normal to boundary + Aktuális a határra @@ -4394,15 +4394,14 @@ A lehetséges változókat lásd az alábbi leírási mezőben. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + A képletek csak az Emer megoldóra érvényesek Formula - Formula + Képlet @@ -4425,15 +4424,15 @@ for the Emer solver surface force (and thus displacement) generated by the flow (Option only applies for Elmer solver) - Flow solution is used to determine -surface force (and thus displacement) -generated by the flow -(Option only applies for Elmer solver) + Az áramlási megoldást a következők meghatározására használják +a felületi erő (és így az elmozdulás) +az áramlás által generált +(Az opció csak az Elmer megoldóra vonatkozik) Surface force by flow - Surface force by flow + Felületi erő az áramlás által @@ -4807,14 +4806,14 @@ vektorát használják irányként Stiffness for Elmer - Stiffness for Elmer + Merevség Elmer esetén What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Milyen merevségnek kell lennie +az Elmer megoldóhoz @@ -5505,7 +5504,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Létrehoz egy elemzési konténert alapértelmezett megoldóval @@ -5736,8 +5735,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + VEM egyenletet hoz létre a + rugalmasságra (feszültség) @@ -6191,7 +6190,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Kattintson a "Hozzáadás" gombra, és válassza ki a geometriai elemeket a listához.{}A következő geometriai elemek választhatók ki: {}{}{} @@ -6451,14 +6450,14 @@ Kérjük, először válassza ki az eredmény típusát. Deformation equation - Deformation equation + Deformációs egyenlet Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + VEM egyenletet hoz létre a + deformációra (nemlineáris rugalmasság) @@ -6552,12 +6551,12 @@ Kérjük, először válassza ki az eredmény típusát. Mechanical equations - Mechanical equations + Mechanikai egyenletek Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Mechanikai egyenletek az Elmer megoldóhoz diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index c7c0ba7912..0c4a8ec1d0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -4,53 +4,53 @@ CmdFemConstraintBearing - + Fem Fem - + Constraint bearing - Constraint bearing + Batasan bantalan - + Creates a FEM constraint for a bearing - Creates a FEM constraint for a bearing + Buat batasan FEM untuk bantalan CmdFemConstraintContact - + Fem Fem - + Constraint contact - Constraint contact + Batasan kontak - + Creates a FEM constraint for contact between faces - Creates a FEM constraint for contact between faces + Buat batasan FEM untuk kontak antar permukaan CmdFemConstraintDisplacement - + Fem Fem - + Constraint displacement Constraint displacement - + Creates a FEM constraint for a displacement acting on a geometric entity Creates a FEM constraint for a displacement acting on a geometric entity @@ -58,17 +58,17 @@ CmdFemConstraintFixed - + Fem Fem - + Constraint fixed Constraint fixed - + Creates a FEM constraint for a fixed geometric entity Creates a FEM constraint for a fixed geometric entity @@ -76,17 +76,17 @@ CmdFemConstraintFluidBoundary - + Fem Fem - + Fluid boundary condition Fluid boundary condition - + Create fluid boundary condition on face entity for Computional Fluid Dynamics Create fluid boundary condition on face entity for Computional Fluid Dynamics @@ -94,17 +94,17 @@ CmdFemConstraintForce - + Fem Fem - + Constraint force Kendala kekuatan - + Creates a FEM constraint for a force acting on a geometric entity Creates a FEM constraint for a force acting on a geometric entity @@ -112,17 +112,17 @@ CmdFemConstraintGear - + Fem Fem - + Constraint gear Constraint gear - + Creates a FEM constraint for a gear Creates a FEM constraint for a gear @@ -130,17 +130,17 @@ CmdFemConstraintHeatflux - + Fem Fem - + Constraint heatflux Constraint heatflux - + Creates a FEM constraint for a heatflux acting on a face Creates a FEM constraint for a heatflux acting on a face @@ -148,17 +148,17 @@ CmdFemConstraintInitialTemperature - + Fem Fem - + Constraint initial temperature Constraint initial temperature - + Creates a FEM constraint for initial temperature acting on a body Creates a FEM constraint for initial temperature acting on a body @@ -166,17 +166,17 @@ CmdFemConstraintPlaneRotation - + Fem Fem - + Constraint plane rotation Constraint plane rotation - + Creates a FEM constraint for plane rotation face Creates a FEM constraint for plane rotation face @@ -184,17 +184,17 @@ CmdFemConstraintPressure - + Fem Fem - + Constraint pressure Constraint pressure - + Creates a FEM constraint for a pressure acting on a face Creates a FEM constraint for a pressure acting on a face @@ -202,17 +202,17 @@ CmdFemConstraintPulley - + Fem Fem - + Constraint pulley Constraint pulley - + Creates a FEM constraint for a pulley Creates a FEM constraint for a pulley @@ -220,17 +220,17 @@ CmdFemConstraintSpring - + Fem Fem - + Constraint spring Constraint spring - + Creates a FEM constraint for a spring acting on a face Creates a FEM constraint for a spring acting on a face @@ -238,17 +238,17 @@ CmdFemConstraintTemperature - + Fem Fem - + Constraint temperature Constraint temperature - + Creates a FEM constraint for a temperature/concentrated heat flux acting on a face Creates a FEM constraint for a temperature/concentrated heat flux acting on a face @@ -256,17 +256,17 @@ CmdFemConstraintTransform - + Fem Fem - + Constraint transform Constraint transform - + Create FEM constraint for transforming a face Create FEM constraint for transforming a face @@ -274,27 +274,27 @@ CmdFemCreateNodesSet - + Fem Fem - + Nodes set Node ditetapkan - + Creates a FEM mesh nodes set Creates a FEM mesh nodes set - + Wrong selection Pilihan salah - + Select a single FEM mesh or nodes set, please. Pilih mesh FEM tunggal atau simpul yang disetel. @@ -302,18 +302,18 @@ CmdFemDefineNodesSet - + Fem Fem - + Node set by poly Node set by poly - - + + Create node set by Poly Buat simpul yang ditetapkan oleh Poli @@ -321,17 +321,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -339,27 +339,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Pilihan salah - + Select a pipeline, please. Select a pipeline, please. @@ -367,17 +367,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -385,17 +385,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -403,17 +403,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -421,93 +421,103 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pesawat - + Sphere Lingkup + + + Cylinder + Silinder + + + + Box + Box + CmdFemPostLinearizedStressesFilter - + Thickness [mm] Plot X-Axis Label Thickness [mm] - + Stress [MPa] Plot Y-Axis Label Stress [MPa] - + Linearized Stresses Plot title Linearized Stresses - + Membrane Plot legend item label Membrane - + Membrane and Bending Plot legend item label Membrane and Bending - + Total Plot legend item label Total - + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Pilihan salah - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -515,27 +525,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -543,17 +553,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -561,17 +571,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -579,112 +589,112 @@ Command - + Make FEM constraint for bearing Make FEM constraint for bearing - + Make FEM constraint contact on face Make FEM constraint contact on face - + Make FEM constraint displacement on face Make FEM constraint displacement on face - + Make FEM constraint fixed geometry Make FEM constraint fixed geometry - + Create fluid boundary condition Create fluid boundary condition - + Make FEM constraint force on geometry Make FEM constraint force on geometry - + Make FEM constraint for gear Make FEM constraint for gear - + Make FEM constraint heatflux on face Make FEM constraint heatflux on face - + Make FEM constraint initial temperature on body Make FEM constraint initial temperature on body - + Make FEM constraint Plane Rotation face Make FEM constraint Plane Rotation face - + Make FEM constraint pressure on face Make FEM constraint pressure on face - + Make FEM constraint spring on face Make FEM constraint spring on face - + Make FEM constraint for pulley Make FEM constraint for pulley - + Make FEM constraint temperature on face Make FEM constraint temperature on face - + Make FEM constraint transform on face Make FEM constraint transform on face - + Place robot Place robot - + Edit nodes set Edit nodes set - + Create nodes set Create nodes set - + Create filter Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result - + Edit Mirror Edit Mirror @@ -692,9 +702,9 @@ Dialog - + Dialog Dialog @@ -766,15 +776,25 @@ FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius + + + Create a cylinder function, defined by its center, axis and radius + Create a cylinder function, defined by its center, axis and radius + + + + Create a box function, defined by its center, length, width and height + Create a box function, defined by its center, length, width and height + FemGui::DlgSettingsFemCcxImp @@ -997,12 +1017,12 @@ Batas frekuensi rendah - + File does not exist File does not exist - + The specified executable '%1' does not exist! @@ -1031,48 +1051,70 @@ Specify another file please. ElmerGrid: - - + + Search in known binary directories Search in known binary directories - + ElmerGrid binary path ElmerGrid binary path - + + Multi-CPU core support: + Multi-CPU core support: + + + + The mesh volume regions processed by each CPU core +will be merged to make the volume boundaries invisible. + The mesh volume regions processed by each CPU core +will be merged to make the volume boundaries invisible. + + + + Filter results + Filter results + + + Leave blank to use default ElmerGrid binary file Leave blank to use default ElmerGrid binary file - + ElmerSolver: ElmerSolver: - + ElmerSolver binary path ElmerSolver binary path - + <html><head/><body><p>Leave blank to use default Elmer elmer binary file</p><p><span style=" font-weight:600;">Note:</span> To use multithreading you must specify here<br> the executable variant with the suffix &quot;_mpi&quot;.</p></body></html> <html><head/><body><p>Leave blank to use default Elmer elmer binary file</p><p><span style=" font-weight:600;">Note:</span> To use multithreading you must specify here<br> the executable variant with the suffix &quot;_mpi&quot;.</p></body></html> - + + Options + Pilihan + + + Multithreading: Multithreading: - + CPU cores to be used: CPU cores to be used: - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> It is recommended to use an even number of cores to benefit from mesh symmetries. (Using 8 cores can be faster than 9 cores.)<br/><span style=" font-weight:600;">Note too:</span> In extreme cases ElmerSolver might not converge if the core number is too high.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> It is recommended to use an even number of cores to benefit from mesh symmetries. (Using 8 cores can be faster than 9 cores.)<br/><span style=" font-weight:600;">Note too:</span> In extreme cases ElmerSolver might not converge if the core number is too high.</p></body></html> @@ -1093,20 +1135,20 @@ Specify another file please. Specify another file please. - - + + FEM Elmer: Not suitable for multithreading FEM Elmer: Not suitable for multithreading - + Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi.exe' is required. Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi.exe' is required. - + Wrong Elmer setting: You use more than one CPU core. Therefore an executable with the suffix '_mpi' is required. Wrong Elmer setting: You use more than one CPU core. @@ -1258,19 +1300,62 @@ constraint or material is applied. + Existing result objects will be kept +otherwise overwritten by new solver run + Existing result objects will be kept +otherwise overwritten by new solver run + + + Keep results on calculation re-run Keep results on calculation re-run - + + The results dialog will be opened +with the last used dialog settings + The results dialog will be opened +with the last used dialog settings + + + Restore result dialog settings Restore result dialog settings - + + All constraints are hidden in the model view +when the results dialog is opened + All constraints are hidden in the model view +when the results dialog is opened + + + Hide constraints when open result dialog Hide constraints when open result dialog + + + Defaults + Default + + + + Default solver + Default solver + + + + Default solver to be added when +adding an analysis container + Default solver to be added when +adding an analysis container + + + + None + Tidak ada + FemGui::DlgSettingsFemGmshImp @@ -1639,7 +1724,7 @@ Specify another file please. FemGui::TaskAnalysisInfo - + Nodes set Node ditetapkan @@ -1647,7 +1732,7 @@ Specify another file please. FemGui::TaskCreateNodeSet - + Nodes set Node ditetapkan @@ -1669,7 +1754,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintBearing - + Input error Input error @@ -1677,7 +1762,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintContact - + Input error Input error @@ -1685,7 +1770,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintDisplacement - + Input error Input error @@ -1693,7 +1778,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintFluidBoundary - + Input error Input error @@ -1701,13 +1786,13 @@ Specify another file please. FemGui::TaskDlgFemConstraintForce - - + + Input error Input error - + Please specify a force greater than 0 Tolong tentukan gaya yang lebih besar dari 0 @@ -1723,7 +1808,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintHeatflux - + Input error Input error @@ -1731,8 +1816,8 @@ Specify another file please. FemGui::TaskDlgFemConstraintInitialTemperature - - + + Input error Input error @@ -1740,7 +1825,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintPressure - + Input error Input error @@ -1756,7 +1841,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintSpring - + Input error Input error @@ -1764,7 +1849,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintTemperature - + Input error Input error @@ -1772,7 +1857,7 @@ Specify another file please. FemGui::TaskDlgFemConstraintTransform - + Input error Input error @@ -1793,7 +1878,7 @@ Specify another file please. FemGui::TaskDlgPost - + Input error Input error @@ -1801,7 +1886,7 @@ Specify another file please. FemGui::TaskDriver - + Nodes set Node ditetapkan @@ -1822,42 +1907,42 @@ Specify another file please. FemGui::TaskFemConstraintBearing - - - - - - + + + + + + Selection error Kesalahan seleksi - + Please use only a single reference for bearing constraint Tolong gunakan hanya satu referensi untuk kendala bantalan - + Only faces can be picked Hanya wajah yang bisa dipetik - + Only cylindrical faces can be picked Hanya wajah silindris yang bisa dipetik - + Only planar faces can be picked Hanya planar wajah dapat terpilih - + Only linear edges can be picked Hanya linear ujung-ujungnya dapat terpilih - + Only faces and edges can be picked Hanya wajah dan ujung-ujungnya dapat terpilih @@ -1865,78 +1950,78 @@ Specify another file please. FemGui::TaskFemConstraintContact - - + + Delete Menghapus - - - + - - - - - - - - - - - - - + + + + + + + + + + + + + + + Selection error Kesalahan seleksi - + Only one face in object! - moved to master face Only one face in object! - moved to master face - - + + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - - + + + + Nothing selected! Tidak ada yang terpilih! - - + + Only one slave face for a contact constraint! Only one slave face for a contact constraint! - - - - + + + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - - + + Only faces can be picked Hanya wajah yang bisa dipetik - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -1944,28 +2029,28 @@ Specify another file please. FemGui::TaskFemConstraintDisplacement + + + - - - - + Selection error Kesalahan seleksi + - Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only one type of selection (vertex,face or edge) per constraint allowed! Only one type of selection (vertex,face or edge) per constraint allowed! @@ -1973,28 +2058,28 @@ Specify another file please. FemGui::TaskFemConstraintFixed - - - - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only one type of selection (vertex,face or edge) per constraint allowed! Only one type of selection (vertex,face or edge) per constraint allowed! @@ -2002,128 +2087,128 @@ Specify another file please. FemGui::TaskFemConstraintFluidBoundary - + Basic Basic - + Turbulence Turbulence - + Thermal Thermal - + select boundary type, faces and set value select boundary type, faces and set value - + Intensity [0~1] Intensity [0~1] - + Dissipation Rate [m2/s3] Dissipation Rate [m2/s3] - + Length Scale[m] Length Scale[m] - + Viscosity Ratio [1] Viscosity Ratio [1] - + Hydraulic Diameter [m] Hydraulic Diameter [m] - - + + Gradient [K/m] Gradient [K/m] - + Flux [W/m2] Flux [W/m2] - + Empty selection Empty selection - + Select an edge or a face, please. Select an edge or a face, please. - - - - - + + + + + Wrong selection Pilihan salah - + Selected object is not a part object! Selected object is not a part object! - + Only one planar face or edge can be selected! Only one planar face or edge can be selected! - + Only planar faces can be picked for 3D Only planar faces can be picked for 3D - + Only planar edges can be picked for 2D Only planar edges can be picked for 2D - + Only faces for 3D part or edges for 2D can be picked Only faces for 3D part or edges for 2D can be picked - - - - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only one type of selection (vertex,face or edge) per constraint allowed! Only one type of selection (vertex,face or edge) per constraint allowed! @@ -2131,39 +2216,39 @@ Specify another file please. FemGui::TaskFemConstraintForce - - - - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only one type of selection (vertex,face or edge) per constraint allowed! Only one type of selection (vertex,face or edge) per constraint allowed! - - + + Wrong selection Pilihan salah - + Select an edge or a face, please. Select an edge or a face, please. @@ -2196,30 +2281,30 @@ Specify another file please. FemGui::TaskFemConstraintHeatflux - - - - - - + + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - - + + Selection must only consist of faces! Selection must only consist of faces! @@ -2227,42 +2312,42 @@ Specify another file please. FemGui::TaskFemConstraintPlaneRotation - - - - - - - - + + + + + + + + Selection error Kesalahan seleksi - - + + Only one face can be selected for a plane rotation constraint! Only one face can be selected for a plane rotation constraint! - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only faces can be picked Hanya wajah yang bisa dipetik - + Only planar faces can be picked Hanya planar wajah dapat terpilih @@ -2270,28 +2355,28 @@ Specify another file please. FemGui::TaskFemConstraintPressure - - - - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only faces can be picked Hanya wajah yang bisa dipetik @@ -2312,28 +2397,28 @@ Specify another file please. FemGui::TaskFemConstraintSpring - - - - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only faces can be picked Hanya wajah yang bisa dipetik @@ -2341,22 +2426,22 @@ Specify another file please. FemGui::TaskFemConstraintTemperature - - - - + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! @@ -2364,64 +2449,64 @@ Specify another file please. FemGui::TaskFemConstraintTransform - + Constraint update error Constraint update error - + The transformable faces have changed. Please add only the transformable faces and remove non-transformable faces! The transformable faces have changed. Please add only the transformable faces and remove non-transformable faces! - - - - - - + + + - - + + + + + Selection error Kesalahan seleksi - - + + Nothing selected! Tidak ada yang terpilih! - - + + Only one face for rectangular transform constraint! Only one face for rectangular transform constraint! - - + + Selected object is not a part! Objek yang dipilih bukan bagiannya! - + Only one face for transform constraint! Only one face for transform constraint! - + Only faces can be picked Hanya wajah yang bisa dipetik - + Only cylindrical faces can be picked Hanya wajah silindris yang bisa dipetik - + Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface @@ -2437,7 +2522,7 @@ Specify another file please. FemGui::TaskPostClip - + Clip region, choose implicit function Clip region, choose implicit function @@ -2445,7 +2530,7 @@ Specify another file please. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -2453,12 +2538,12 @@ Specify another file please. FemGui::TaskPostDataAlongLine - + Data along a line options Data along a line options - + Length X-Axis plot label Panjangnya @@ -2467,12 +2552,12 @@ Specify another file please. FemGui::TaskPostDataAtPoint - + Data at point options Data at point options - + %1 at (%2; %3; %4) is: %5 %6 %1 at (%2; %3; %4) is: %5 %6 @@ -2480,7 +2565,7 @@ Specify another file please. FemGui::TaskPostDisplay - + Result display options Result display options @@ -2488,7 +2573,7 @@ Specify another file please. FemGui::TaskPostFunction - + Implicit function Implicit function @@ -2496,7 +2581,7 @@ Specify another file please. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -2504,7 +2589,7 @@ Specify another file please. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -2512,7 +2597,7 @@ Specify another file please. FemGui::TaskTetParameter - + Tet Parameter Uji parameter @@ -2520,7 +2605,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktifkan analisis @@ -2541,15 +2626,15 @@ Specify another file please. FemMaterial - + FEM material FEM material - + Material Bahan @@ -2574,9 +2659,9 @@ Specify another file please. Material name - + TextLabel TextLabel @@ -2611,83 +2696,83 @@ Specify another file please. Density - + 0 kg/m^3 0 kg/m^3 - + Mechanical Properties Mechanical Properties - + Young's Modulus: Modulus Young: - + 0 Pa 0 Pa - + Poisson Ratio: Perbandingan poisson: - + Fluidic Properties Fluidic Properties - + Kinematic viscosity: Kinematic viscosity: - + 0 m^2/s 0 m^2/s - + Thermal Properties Thermal Properties - + Thermal Conductivity: Thermal Conductivity: - + 0 W/m/K 0 W/m/K - + Expansion Coefficient: Expansion Coefficient: - - + + 0 m/m/K 0 m/m/K - + Specific Heat: Specific Heat: - + 0 J/kg/K 0 J/kg/K - + Vol Expansion Coeff Vol Expansion Coeff @@ -2922,17 +3007,17 @@ Specify another file please. + + + - - - 0 mm 0 mm @@ -2947,11 +3032,11 @@ Specify another file please. Centrif parameter - + - + Parameter Parameter @@ -2981,11 +3066,13 @@ Specify another file please. SectionPrint parameter - + + - - + + + Constraint Properties Constraint Properties @@ -3000,60 +3087,188 @@ Specify another file please. Potential: - - Electric potential in V - Electric potential in V - - + + + - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + unspecified unspecified + + + Electric potential + Electric potential + + To define a vector field + To define a vector field + + + + Vector Field + Vector Field + + + + Imaginary part is only used for equations +with a harmonic/oscillating driving force + Imaginary part is only used for equations +with a harmonic/oscillating driving force + + + + + + Real + Real + + + + + + Imaginary + Imaginary + + + + Scalar + Scalar + + + + Potential as specified above + Potential as specified above + + + + Imaginary part of scalar potential + Imaginary part of scalar potential + + + + + + x + x + + + + Real part of potential x-component +Note: has no effect if a solid was selected + Real part of potential x-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential x-component +Note: has no effect if a solid was selected + Imaginary part of potential x-component +Note: has no effect if a solid was selected + + + + + + y + y + + + + Real part of potential y-component +Note: has no effect if a solid was selected + Real part of potential y-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential y-component +Note: has no effect if a solid was selected + Imaginary part of potential y-component +Note: has no effect if a solid was selected + + + + + + z + z + + + + Real part of potential z-component +Note: has no effect if a solid was selected + Real part of potential z-component +Note: has no effect if a solid was selected + + + + Imaginary part of potential z-component +Note: has no effect if a solid was selected + Imaginary part of potential z-component +Note: has no effect if a solid was selected + + + Whether the constraint defines a constant potential Whether the constraint defines a constant potential - + Potential Constant Potential Constant - + Whether the constraint defines a farfield potential Whether the constraint defines a farfield potential - + Farfield / Electric infinity Farfield / Electric infinity - + Whether the constraint is for the electric force Whether the constraint is for the electric force - + Calculate Electric Force Calculate Electric Force - + Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation Capacity Body: - + Counter of the body (or face) with a capacitance Counter of the body (or face) with a capacitance @@ -3063,8 +3278,8 @@ Specify another file please. Beam section parameter - + Cross section parameter Cross section parameter @@ -3115,38 +3330,33 @@ Specify another file please. Rotation: - - + + + + + + + formula + formula + + + + Velocity x: Velocity x: - - + + Velocity y: Velocity y: - - + + Velocity z: Velocity z: - - - - - - - - m/s - m/s - - - - normal to boundary - normal to boundary - Mesh boundary layer settings @@ -3202,6 +3412,93 @@ Specify another file please. Pressure: Pressure: + + + Current density: + Current density: + + + + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Real part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + Imaginary part of potential x-component +Note: if a face was selected this will be the value + in normal face direction + settings for y and z will be ignored + + + + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Real part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + Imaginary part of potential y-component +Note: for 2D only setting for x is possible, + setting for y will be ignored + + + + Magnetization + Magnetization + + + + Real part of potential x-component + Real part of potential x-component + + + + Imaginary part of potential x-component + Imaginary part of potential x-component + + + + Real part of potential y-component + Real part of potential y-component + + + + Imaginary part of potential y-component + Imaginary part of potential y-component + + + + + Real part of potential z-component + Real part of potential z-component + + + + + Imaginary part of potential z-component + Imaginary part of potential z-component + + + + Normal to boundary + Normal to boundary + GmshMesh @@ -3318,26 +3615,26 @@ Specify another file please. Edit kendala - + - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - + - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3347,64 +3644,64 @@ Specify another file please. Meshing - + Constraint force Kendala kekuatan - - - + + + FEM FEM - - + + Import-Export Ekspor Impor - + Constraint Contact Constraint Contact - + Constraint displacement Constraint displacement - + Constraint fixed Constraint fixed - + Constraint fluid boundary Constraint fluid boundary - + Constraint heat flux Constraint heat flux - + Constraint initial temperature Constraint initial temperature - + Constraint planerotation Constraint planerotation - + Constraint pressure Constraint pressure @@ -3414,22 +3711,22 @@ Specify another file please. Constraint pulley - + Constraint spring Constraint spring - + Constraint temperature Constraint temperature - + Constraint transform Constraint transform - + Edit post processing object Edit post processing object @@ -3469,10 +3766,7 @@ Specify another file please. Groups - - - - + Are you sure you want to continue? Apakah yakin ingin melanjutkan? @@ -3815,41 +4109,10 @@ For possible variables, see the description box below. Std_Delete - - The analysis is not empty, therefore the -following referencing objects might be lost: - The analysis is not empty, therefore the -following referencing objects might be lost: - - - - - - + Object dependencies Objek dependensi - - - The functions list is not empty, therefore the -following referencing objects might be lost: - The functions list is not empty, therefore the -following referencing objects might be lost: - - - - The pipeline is not empty, therefore the -following referencing objects might be lost: - The pipeline is not empty, therefore the -following referencing objects might be lost: - - - - The solver is not empty, therefore the -following referencing objects might be lost: - The solver is not empty, therefore the -following referencing objects might be lost: - TaskAnalysisInfo @@ -4114,12 +4377,12 @@ following referencing objects might be lost: Pilih beberapa wajah, klik Tambah atau Hapus - + Add Menambahkan - + Remove Menghapus @@ -4129,52 +4392,79 @@ following referencing objects might be lost: Pemindahan x - - - - - - - Free - Gratis - - - - - - - - + + + + + + Fixed Tetap - + + + + Formulas are only valid +for the Emer solver + Formulas are only valid +for the Emer solver + + + + + + Formula + Formula + + + Displacement y Pemindahan y - + Displacement z Pemindahan z - + + mm + mm + + + + Flow solution is used to determine +surface force (and thus displacement) +generated by the flow +(Option only applies for Elmer solver) + Flow solution is used to determine +surface force (and thus displacement) +generated by the flow +(Option only applies for Elmer solver) + + + + Surface force by flow + Surface force by flow + + + Rotations are only valid for Beam and Shell elements. Rotasi hanya berlaku untuk elemen Beam dan Shell. - + Rotation x Perputaran x - + Rotation y Perputaran y - + Rotation z Perputaran z @@ -4438,11 +4728,6 @@ normal vector of the face is used as direction Insert component's initial temperature: Insert component's initial temperature: - - - 300 K - 300 K - TaskFemConstraintPlaneRotation @@ -4528,12 +4813,24 @@ normal vector of the face is used as direction Menghapus - + Normal Stiffness Normal Stiffness - + + Stiffness for Elmer + Stiffness for Elmer + + + + What stiffness should be +used for the Elmer solver + What stiffness should be +used for the Elmer solver + + + Tangential Stiffness Tangential Stiffness @@ -4571,11 +4868,6 @@ normal vector of the face is used as direction Concentrated heat flux Concentrated heat flux - - - 300 K - 300 K - TaskFemConstraintTransform @@ -4600,33 +4892,33 @@ normal vector of the face is used as direction Select a face, click Add or Remove - + Add Menambahkan - + Remove Menghapus - + Rotation about X-Axis Rotation about X-Axis - + Rotation about Y-Axis Rotation about Y-Axis - + Rotation about Z-Axis Rotation about Z-Axis - - + + Transformable surfaces Transformable surfaces @@ -5040,157 +5332,157 @@ normal vector of the face is used as direction Workbench - + FEM FEM - + &FEM &FEM - + Model Model - + M&odel M&odel - + Materials Bahan - + &Materials &Materials - + Element Geometry Element Geometry - + &Element Geometry &Element Geometry - + Electrostatic Constraints Electrostatic Constraints - + &Electrostatic Constraints &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Memecahkan - + &Solve &Solve - + Results Results - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Utilitas @@ -5198,22 +5490,1088 @@ normal vector of the face is used as direction setupFilter - + Error: A filter can only be applied to a single object. Error: A filter can only be applied to a single object. - - - + + + The filter could not be set up. The filter could not be set up. - - + + Error: no post processing object selected. Error: no post processing object selected. + + FEM_Analysis + + + Analysis container + Analysis container + + + + Creates an analysis container with default solver + Creates an analysis container with default solver + + + + FEM_ClippingPlaneAdd + + + Clipping plane on face + Clipping plane on face + + + + Add a clipping plane on a selected face + Add a clipping plane on a selected face + + + + FEM_ClippingPlaneRemoveAll + + + + Remove all clipping planes + Remove all clipping planes + + + + FEM_ConstantVacuumPermittivity + + + Constant vacuum permittivity + Constant vacuum permittivity + + + + Creates a FEM constant vacuum permittivity to overwrite standard value + Creates a FEM constant vacuum permittivity to overwrite standard value + + + + FEM_ConstraintBodyHeatSource + + + Constraint body heat source + Constraint body heat source + + + + Creates a FEM constraint body heat source + Creates a FEM constraint body heat source + + + + FEM_ConstraintCentrif + + + Constraint centrif + Constraint centrif + + + + Creates a FEM constraint centrif + Creates a FEM constraint centrif + + + + FEM_ConstraintElectrostaticPotential + + + Constraint electrostatic potential + Constraint electrostatic potential + + + + Creates a FEM constraint electrostatic potential + Creates a FEM constraint electrostatic potential + + + + FEM_ConstraintFlowVelocity + + + Constraint flow velocity + Constraint flow velocity + + + + Creates a FEM constraint flow velocity + Creates a FEM constraint flow velocity + + + + FEM_ConstraintInitialFlowVelocity + + + Constraint initial flow velocity + Constraint initial flow velocity + + + + Creates a FEM constraint initial flow velocity + Creates a FEM constraint initial flow velocity + + + + FEM_ConstraintInitialPressure + + + Constraint initial pressure + Constraint initial pressure + + + + Creates a FEM constraint initial pressure + Creates a FEM constraint initial pressure + + + + FEM_ConstraintSectionPrint + + + Constraint sectionprint + Constraint sectionprint + + + + Creates a FEM constraint sectionprint + Creates a FEM constraint sectionprint + + + + FEM_ConstraintSelfWeight + + + Constraint self weight + Constraint self weight + + + + Creates a FEM constraint self weight + Creates a FEM constraint self weight + + + + FEM_ConstraintTie + + + Constraint tie + Constraint tie + + + + Creates a FEM constraint tie + Creates a FEM constraint tie + + + + FEM_ElementFluid1D + + + Fluid section for 1D flow + Fluid section for 1D flow + + + + Creates a FEM fluid section for 1D flow + Creates a FEM fluid section for 1D flow + + + + FEM_ElementGeometry1D + + + Beam cross section + Beam cross section + + + + Creates a FEM beam cross section + Creates a FEM beam cross section + + + + FEM_ElementGeometry2D + + + Shell plate thickness + Shell plate thickness + + + + Creates a FEM shell plate thickness + Creates a FEM shell plate thickness + + + + FEM_ElementRotation1D + + + Beam rotation + Beam rotation + + + + Creates a FEM beam rotation + Creates a FEM beam rotation + + + + FEM_EquationElectrostatic + + + Electrostatic equation + Electrostatic equation + + + + Creates a FEM equation for electrostatic + Creates a FEM equation for electrostatic + + + + FEM_EquationElasticity + + + Elasticity equation + Elasticity equation + + + + Creates a FEM equation for + elasticity (stress) + Creates a FEM equation for + elasticity (stress) + + + + FEM_EquationFlow + + + Flow equation + Flow equation + + + + Creates a FEM equation for flow + Creates a FEM equation for flow + + + + FEM_EquationFlux + + + Flux equation + Flux equation + + + + Creates a FEM equation for flux + Creates a FEM equation for flux + + + + FEM_EquationElectricforce + + + Electricforce equation + Electricforce equation + + + + Creates a FEM equation for electric forces + Creates a FEM equation for electric forces + + + + FEM_EquationHeat + + + Heat equation + Heat equation + + + + Creates a FEM equation for heat + Creates a FEM equation for heat + + + + FEM_Examples + + + + Open FEM examples + Open FEM examples + + + + FEM_MaterialEditor + + + Material editor + Material editor + + + + Opens the FreeCAD material editor + Opens the FreeCAD material editor + + + + FEM_MaterialFluid + + + Material for fluid + Material for fluid + + + + Creates a FEM material for fluid + Creates a FEM material for fluid + + + + FEM_MaterialMechanicalNonlinear + + + Nonlinear mechanical material + Nonlinear mechanical material + + + + Creates a nonlinear mechanical material + Creates a nonlinear mechanical material + + + + FEM_MaterialReinforced + + + Reinforced material (concrete) + Reinforced material (concrete) + + + + Creates a material for reinforced matrix material such as concrete + Creates a material for reinforced matrix material such as concrete + + + + FEM_MaterialSolid + + + Material for solid + Material for solid + + + + Creates a FEM material for solid + Creates a FEM material for solid + + + + FEM_FEMMesh2Mesh + + + FEM mesh to mesh + FEM mesh to mesh + + + + Convert the surface of a FEM mesh to a mesh + Convert the surface of a FEM mesh to a mesh + + + + FEM_MeshBoundaryLayer + + + FEM mesh boundary layer + FEM mesh boundary layer + + + + Creates a FEM mesh boundary layer + Creates a FEM mesh boundary layer + + + + FEM_MeshClear + + + Clear FEM mesh + Clear FEM mesh + + + + Clear the Mesh of a FEM mesh object + Clear the Mesh of a FEM mesh object + + + + FEM_MeshDisplayInfo + + + + Display FEM mesh info + Display FEM mesh info + + + + FEM_MeshGmshFromShape + + + FEM mesh from shape by Gmsh + FEM mesh from shape by Gmsh + + + + Create a FEM mesh from a shape by Gmsh mesher + Create a FEM mesh from a shape by Gmsh mesher + + + + FEM_MeshGroup + + + FEM mesh group + FEM mesh group + + + + Creates a FEM mesh group + Creates a FEM mesh group + + + + FEM_MeshNetgenFromShape + + + FEM mesh from shape by Netgen + FEM mesh from shape by Netgen + + + + Create a FEM mesh from a solid or face shape by Netgen internal mesher + Create a FEM mesh from a solid or face shape by Netgen internal mesher + + + + FEM_MeshRegion + + + FEM mesh region + FEM mesh region + + + + Creates a FEM mesh region + Creates a FEM mesh region + + + + FEM_ResultShow + + + Show result + Tampilkan hasil + + + + Shows and visualizes selected result data + Shows and visualizes selected result data + + + + FEM_ResultsPurge + + + Purge results + Purge results + + + + Purges all results from active analysis + Purges all results from active analysis + + + + FEM_SolverCalculixCxxtools + + + Solver CalculiX Standard + Solver CalculiX Standard + + + + Creates a standard FEM solver CalculiX with ccx tools + Creates a standard FEM solver CalculiX with ccx tools + + + + FEM_SolverCalculix + + + Solver CalculiX (new framework) + Solver CalculiX (new framework) + + + + Creates a FEM solver CalculiX new framework (less result error handling) + Creates a FEM solver CalculiX new framework (less result error handling) + + + + FEM_SolverControl + + + Solver job control + Solver job control + + + + Changes solver attributes and runs the calculations for the selected solver + Changes solver attributes and runs the calculations for the selected solver + + + + FEM_SolverElmer + + + Solver Elmer + Solver Elmer + + + + Creates a FEM solver Elmer + Creates a FEM solver Elmer + + + + FEM_SolverMystran + + + Solver Mystran + Solver Mystran + + + + Creates a FEM solver Mystran + Creates a FEM solver Mystran + + + + FEM_SolverRun + + + Run solver calculations + Run solver calculations + + + + Runs the calculations for the selected solver + Runs the calculations for the selected solver + + + + FEM_SolverZ88 + + + Solver Z88 + Solver Z88 + + + + Creates a FEM solver Z88 + Creates a FEM solver Z88 + + + + ControlWidget + + + Solver Control + Solver Control + + + + Working Directory + Working Directory + + + + + Write + Write + + + + + + + Edit + Edit + + + + Elapsed Time: + Elapsed Time: + + + + + Run + menjalankan + + + + + Re-write + Re-write + + + + Re-run + Re-run + + + + Abort + Abort + + + + _Selector + + + Add + Menambahkan + + + + Remove + Menghapus + + + + BoundarySelector + + + Select Faces/Edges/Vertexes + Select Faces/Edges/Vertexes + + + + To add references: select them in the 3D view and click "Add". + To add references: select them in the 3D view and click "Add". + + + + SolidSelector + + + Select Solids + Select Solids + + + + Select elements part of the solid that shall be added to the list. To add the solid click "Add". + Select elements part of the solid that shall be added to the list. To add the solid click "Add". + + + + GeometryElementsSelection + + + Geometry reference selector for a + Geometry reference selector for a + + + + Add + Menambahkan + + + + Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + + + + {}If no geometry is added to the list, all remaining ones are used. + {}If no geometry is added to the list, all remaining ones are used. + + + + Selection mode + Selection mode + + + + Solid + Padat + + + + FEM + + + Displacement Magnitude + Displacement Magnitude + + + + Displacement X + Displacement X + + + + Displacement Y + Displacement Y + + + + Displacement Z + Displacement Z + + + + von Mises Stress + von Mises Stress + + + + Max Shear Stress + Max Shear Stress + + + + Max Principal Stress + Max Principal Stress + + + + Temperature + Temperature + + + + Mass Flow Rate + Mass Flow Rate + + + + Network Pressure + Network Pressure + + + + Min Principal Stress + Min Principal Stress + + + + Equivalent Plastic Strain + Equivalent Plastic Strain + + + + Information + Informasi + + + + No histogram available. +Please select a result type first. + No histogram available. +Please select a result type first. + + + + Histogram of {} + Histogram of {} + + + + Nodes + Node + + + + Empty result mesh + Empty result mesh + + + + + No result object + No result object + + + + FEM_ConstraintCurrentDensity + + + Constraint current density + Constraint current density + + + + Creates a FEM constraint current density + Creates a FEM constraint current density + + + + FEM_EquationMagnetodynamic2D + + + Magnetodynamic2D equation + Magnetodynamic2D equation + + + + Creates a FEM equation for + 2D magnetodynamic forces + Creates a FEM equation for + 2D magnetodynamic forces + + + + CmdFemCompEmConstraints + + + Fem + Fem + + + + + Electromagnetic constraints + Electromagnetic constraints + + + + FEM_ConstraintMagnetization + + + Constraint magnetization + Constraint magnetization + + + + Creates a FEM constraint magnetization + Creates a FEM constraint magnetization + + + + FEM_EquationMagnetodynamic + + + Magnetodynamic equation + Magnetodynamic equation + + + + Creates a FEM equation for + magnetodynamic forces + Creates a FEM equation for + magnetodynamic forces + + + + TaskPostContours + + + Form + Bentuk + + + + Vector: + Vector: + + + + Field: + Field: + + + + Contour lines will not be colored + Contour lines will not be colored + + + + No color + No color + + + + CmdFemCompEmEquations + + + Fem + Fem + + + + Electromagnetic equations + Electromagnetic equations + + + + Electromagnetic equations for the Elmer solver + Electromagnetic equations for the Elmer solver + + + + CmdFemPostContoursFilter + + + Fem + Fem + + + + Contours filter + Contours filter + + + + Define/create a contours filter which displays iso contours + Define/create a contours filter which displays iso contours + + + + FemGui::TaskPostContours + + + Contours filter options + Contours filter options + + + + FEM_EquationDeformation + + + Deformation equation + Deformation equation + + + + Creates a FEM equation for + deformation (nonlinear elasticity) + Creates a FEM equation for + deformation (nonlinear elasticity) + + + + BoxWidget + + + Form + Bentuk + + + + x + x + + + + y + y + + + + z + z + + + + Center + Pusat + + + + Length + Panjangnya + + + + Width + Lebar + + + + Height + Tinggi + + + + CylinderWidget + + + Form + Bentuk + + + + x + x + + + + y + y + + + + z + z + + + + Center + Pusat + + + + Axis + Axis + + + + Radius + Jari-jari + + + + CmdFemCompMechEquations + + + Fem + Fem + + + + Mechanical equations + Mechanical equations + + + + Mechanical equations for the Elmer solver + Mechanical equations for the Elmer solver + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index 1b4428bf1d..267e86ab33 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -788,12 +788,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + შექმენით ცილინდრის ფუნქცია, აღწერილი მისი ცენტრით, ღერძით და რადიუსით Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + კუბის ფუნქციის შექმნა. აღიწერება მისი ცენტრით, სიგრძით, სიგანით და სიმაღლით @@ -1299,8 +1299,8 @@ constraint or material is applied. Existing result objects will be kept otherwise overwritten by new solver run - Existing result objects will be kept -otherwise overwritten by new solver run + არსებული შედეგის ობიექტები შენარჩუნებული იქნება +წინააღმდეგ შემთხვევაში თავზე გადაეწერება ამომხსნელის თავიდან გაშვებისას @@ -1311,8 +1311,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + შედეგების ფანჯარა ბოლოს გამოყენებული +ფანჯრის პარამეტრებით გაიხსნება @@ -1323,8 +1323,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + როცა შედეგების ფანჯარა იხსნება, +მოდელის ხედში ყველა შეზღუდვა დამალულია @@ -1339,14 +1339,14 @@ when the results dialog is opened Default solver - Default solver + ნაგულისხმები ამომხსნელი Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + ანალიზის კონტეინერის დამატებისას +დამატებული ნაგულისხმები ამომხსნელი @@ -3329,7 +3329,7 @@ Note: has no effect if a solid was selected formula - formula + ფორმულა @@ -3489,7 +3489,7 @@ Note: for 2D only setting for x is possible, Normal to boundary - Normal to boundary + ნორმალი საზღვრამდე @@ -4399,15 +4399,15 @@ For possible variables, see the description box below. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + ფორმულები მხოლოდ +Emer ამოხსნელისთვისაა სწორი Formula - Formula + ფორმულა @@ -4430,15 +4430,15 @@ for the Emer solver surface force (and thus displacement) generated by the flow (Option only applies for Elmer solver) - Flow solution is used to determine -surface force (and thus displacement) -generated by the flow -(Option only applies for Elmer solver) + დინების ამოსნა მის მიერ შექმნილი ზედაპრის +ძალის (და ასევე ჩანაცვლების) განსაზღვრისთვის +გამოიყენება +(პარამეტრი მხოლოდ Elmer ამომხსნელს ეხება) Surface force by flow - Surface force by flow + ნაკადის ზედაპირული ძალა @@ -4810,14 +4810,14 @@ normal vector of the face is used as direction Stiffness for Elmer - Stiffness for Elmer + სიმაგრე Elmer-სთვის What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + რა სიმაგრე უნდა იყოს +გამოყენებული Elmer ამომხსნელისთვის @@ -5508,7 +5508,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + ანალიზის კონტეინერის შექმნა ნაგულისხმები ამომხსნელით @@ -5739,8 +5739,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + სემ განტოლების შექმნა + ელასტიურობისთვის (სტრესი) @@ -6194,7 +6194,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + დააწკაპუნეთ ღილაკზე „დამატება“ და აირჩიეთ გეომეტრიული ელემენტები სიაში დასამატებლად.{} გაქვთ შემდეგი გეომეტრიის ელემენტების არჩევის უფლება: {}{}{} @@ -6455,14 +6455,14 @@ Please select a result type first. Deformation equation - Deformation equation + დეფორმაციის განტოლება Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + ქმნის სემ ტოლობას + დეფორმაციისთვის (არახაზოვანი ელასტიურობა) @@ -6556,12 +6556,12 @@ Please select a result type first. Mechanical equations - Mechanical equations + მექანიკური განტოლებები Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + მექანიკური განტოლებები Elmer ამომხსნელისთვის diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index 9e0146dd90..3b3b6393ee 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -1342,7 +1342,7 @@ when the results dialog is opened Default solver - Default solver + Standaardoplosser @@ -3337,7 +3337,7 @@ Note: has no effect if a solid was selected formula - formula + formule @@ -4415,7 +4415,7 @@ for the Emer solver Formula - Formula + Formule diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 2f7be44d30..06583889a3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -787,12 +787,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Utwórz funkcję walca, zdefiniowaną przez jego środek, oś i promień Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Utwórz funkcję prostopadłościanu, zdefiniowanego przez jego środek, długość, szerokość i wysokość @@ -1296,8 +1296,8 @@ constraint or material is applied. Existing result objects will be kept otherwise overwritten by new solver run - Existing result objects will be kept -otherwise overwritten by new solver run + Istniejące obiekty wyników zostaną zachowane +w przeciwnym razie będą nadpisane przez ponowne uruchomienie solvera @@ -1308,8 +1308,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + Okno dialogowe wyników będzie otwarte +z ostatnio użytymi ustawieniami @@ -1320,8 +1320,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Wszystkie wiązania są ukryte w widoku modelu +gdy okno dialogowe wyników jest otwarte @@ -1336,14 +1336,14 @@ when the results dialog is opened Default solver - Default solver + Domyślny solver Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + Domyślny solver do dodania przy +tworzeniu nowej analizy @@ -3172,14 +3172,14 @@ z harmoniczną / oscylującą siłą napędzającą Real part of potential x-component Note: has no effect if a solid was selected Rzeczywista część składowej x potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę Imaginary part of potential x-component Note: has no effect if a solid was selected Urojona część składowej x potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę @@ -3193,14 +3193,14 @@ Uwaga: nie ma efektu jeśli wybrano bryłę Real part of potential y-component Note: has no effect if a solid was selected Rzeczywista część składowej y potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę Imaginary part of potential y-component Note: has no effect if a solid was selected Urojona część składowej y potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę @@ -3214,14 +3214,14 @@ Uwaga: nie ma efektu jeśli wybrano bryłę Real part of potential z-component Note: has no effect if a solid was selected Rzeczywista część składowej z potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę Imaginary part of potential z-component Note: has no effect if a solid was selected Urojona część składowej z potencjału -Uwaga: nie ma efektu jeśli wybrano bryłę +Uwaga: bez efektu, jeśli wybrano bryłę @@ -3329,7 +3329,7 @@ Uwaga: nie ma efektu jeśli wybrano bryłę formula - formula + wzór @@ -3489,7 +3489,7 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Normal to boundary - Normal to boundary + Normalny do brzegu @@ -4399,15 +4399,15 @@ Aby uzyskać możliwe zmienne, zobacz pole opisu poniżej. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + Wzory są wykorzystywane tylko +przez solver Elmer Formula - Formula + Wzór @@ -4430,15 +4430,15 @@ for the Emer solver surface force (and thus displacement) generated by the flow (Option only applies for Elmer solver) - Flow solution is used to determine -surface force (and thus displacement) -generated by the flow -(Option only applies for Elmer solver) + Rozwiązanie przepływu jest używane do określenia +siły na powierzchni (a więc też przemieszczenia) +generowanej przez przepływ +(Tylko dla solvera Elmer) Surface force by flow - Surface force by flow + Siła na powierzchni od przepływu @@ -4810,14 +4810,14 @@ normal vector of the face is used as direction Stiffness for Elmer - Stiffness for Elmer + Sztywność W Elmerze What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Jaka sztywność powinna być +użyta przez solver Elmer @@ -5508,7 +5508,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Tworzy analizę z domyślnym solverem @@ -5739,8 +5739,8 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Tworzy równanie MES dla +sprężystość (naprężenia) @@ -6194,7 +6194,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Kliknij "Dodaj" i wybierz obiekty geometryczne do dodania do listy.{} Następujące obiekty geometryczne mogą być wybrane: {}{}{} @@ -6455,14 +6455,14 @@ sił magnetodynamicznych 2D Deformation equation - Deformation equation + Równanie deformacji Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + Tworzy równanie MES dla +deformacji (sprężystość nieliniowa) @@ -6556,12 +6556,12 @@ sił magnetodynamicznych 2D Mechanical equations - Mechanical equations + Równania mechaniczne Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Równania mechaniczne dla solvera Elmer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 66420b8662..a070940c84 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -696,7 +696,7 @@ Edit Mirror - Edit Mirror + Editare oglindă @@ -1296,7 +1296,7 @@ constraint or material is applied. Results - Results + Rezultate @@ -1362,7 +1362,7 @@ adding an analysis container Gmsh - Gmsh + Zgură @@ -3520,7 +3520,7 @@ Note: for 2D only setting for x is possible, Max element size (0.0 = Auto): - Max element size (0.0 = Auto): + Dimensiunea maximă a elementului (0,0 = Auto): @@ -3531,7 +3531,7 @@ Note: for 2D only setting for x is possible, Min element size (0.0 = Auto): - Min element size (0.0 = Auto): + Dimensiunea minimă a elementului (0,0 = Auto): @@ -3541,7 +3541,7 @@ Note: for 2D only setting for x is possible, Gmsh - Gmsh + Zgură @@ -5464,7 +5464,7 @@ used for the Elmer solver Results - Results + Rezultate @@ -5548,7 +5548,7 @@ used for the Elmer solver Constant vacuum permittivity - Constant vacuum permittivity + Perectivitate de vid constantă @@ -5784,7 +5784,7 @@ used for the Elmer solver Electricforce equation - Electricforce equation + Ecuația forței electrice diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 6d8b414ad7..abddcb17ab 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -787,12 +787,12 @@ Create a cylinder function, defined by its center, axis and radius - Create a cylinder function, defined by its center, axis and radius + Создать функцию цилиндра, определяемую ее центром, осью и радиусом Create a box function, defined by its center, length, width and height - Create a box function, defined by its center, length, width and height + Создать функцию бокса, определяемую его центром, длиной, шириной и высотой @@ -1297,8 +1297,8 @@ constraint or material is applied. Existing result objects will be kept otherwise overwritten by new solver run - Existing result objects will be kept -otherwise overwritten by new solver run + Существующие результирующие объекты будут храниться +в противном случае перезаписаны новым исполнителем @@ -1309,8 +1309,8 @@ otherwise overwritten by new solver run The results dialog will be opened with the last used dialog settings - The results dialog will be opened -with the last used dialog settings + Диалог результатов будет открыт +с последними настройками диалогового окна @@ -1321,8 +1321,8 @@ with the last used dialog settings All constraints are hidden in the model view when the results dialog is opened - All constraints are hidden in the model view -when the results dialog is opened + Все ограничения скрыты при просмотре модели +при открытии диалога результатов @@ -1337,14 +1337,14 @@ when the results dialog is opened Default solver - Default solver + Решатель по умолчанию Default solver to be added when adding an analysis container - Default solver to be added when -adding an analysis container + Решатель по умолчанию, добавляемый при добавлении +контейнера анализа @@ -3325,7 +3325,7 @@ Note: has no effect if a solid was selected formula - formula + формула @@ -3485,7 +3485,7 @@ Note: for 2D only setting for x is possible, Normal to boundary - Normal to boundary + Нормаль к границе @@ -4395,15 +4395,15 @@ For possible variables, see the description box below. Formulas are only valid for the Emer solver - Formulas are only valid -for the Emer solver + Формулы верны только +для решения Emer Formula - Formula + Формула @@ -4426,15 +4426,15 @@ for the Emer solver surface force (and thus displacement) generated by the flow (Option only applies for Elmer solver) - Flow solution is used to determine -surface force (and thus displacement) -generated by the flow -(Option only applies for Elmer solver) + Решение Flow используется для определения +поверхностной силы (и, следовательно, смещения) +создаваемой потоком +(Опция применима только для решения Elmer) Surface force by flow - Surface force by flow + Поверхностная сила потока @@ -4808,14 +4808,14 @@ normal vector of the face is used as direction Stiffness for Elmer - Stiffness for Elmer + Жесткость для Elmer What stiffness should be used for the Elmer solver - What stiffness should be -used for the Elmer solver + Какую жесткость следует +использовать для решения Elmer @@ -5506,7 +5506,7 @@ used for the Elmer solver Creates an analysis container with default solver - Creates an analysis container with default solver + Создает контейнер анализа с решателем по умолчанию @@ -5737,8 +5737,7 @@ used for the Elmer solver Creates a FEM equation for elasticity (stress) - Creates a FEM equation for - elasticity (stress) + Создает уравнение МКЭ для расчета упругости (напряжения) @@ -6192,7 +6191,7 @@ used for the Elmer solver Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements can be selected: {}{}{} + Нажмите «Добавить» и выберите геометрические элементы, чтобы добавить их в список.{}Можно выбрать следующие геометрические элементы: {}{}{} @@ -6453,14 +6452,14 @@ Please select a result type first. Deformation equation - Deformation equation + Уравнение деформации Creates a FEM equation for deformation (nonlinear elasticity) - Creates a FEM equation for - deformation (nonlinear elasticity) + Создать FEM уравнение для + деформации (нелинейная эластичность) @@ -6554,12 +6553,12 @@ Please select a result type first. Mechanical equations - Mechanical equations + Механические уравнения Mechanical equations for the Elmer solver - Mechanical equations for the Elmer solver + Уравнения механики для решателя Элмера diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index fe8e39f524..949fb06f96 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -428,12 +428,12 @@ Filter functions - Filter functions + Zmožnosti presejanja Functions for use in postprocessing filter... - Functions for use in postprocessing filter... + Zmožnosti, ki jih je mogoče uporabiti v poobdelovalnem situ ... @@ -537,7 +537,7 @@ Creates a post processing pipeline from a result object - Creates a post processing pipeline from a result object + Ustvari iz dobljenega predmeta poobdelovalni cevovod @@ -3728,7 +3728,7 @@ Opomba: pri 2D je mogoče nastavili le x, Edit post processing object - Edit post processing object + Uredi poobdelovalni predmet @@ -5474,12 +5474,12 @@ used for the Elmer solver Filter functions - Filter functions + Zmožnosti presejanja &Filter functions - &Filter functions + &Zmožnosti presejanja @@ -5492,20 +5492,20 @@ used for the Elmer solver Error: A filter can only be applied to a single object. - Error: A filter can only be applied to a single object. + Napaka: Sito lahko uporabite le na enem predmetu. The filter could not be set up. - The filter could not be set up. + Sita ni bilo mogoče nastaviti. Error: no post processing object selected. - Error: no post processing object selected. + Napaka: izbran ni noben poobdelovalni predmet. diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts index 64ccb87468..3d0f58275f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts @@ -443,12 +443,12 @@ Sphere - Sfera + Lopta Cylinder - Cilindar + Valjak @@ -1341,7 +1341,7 @@ when the results dialog is opened Default solver - Default solver + Podrazumevani algoritam za rešavanje @@ -4236,7 +4236,7 @@ Za moguće promenljive, pogledaj okvir za opis ispod. Reverse direction - Reverse direction + Obrni smer @@ -4304,7 +4304,7 @@ Za moguće promenljive, pogledaj okvir za opis ispod. Reversed direction - Obrnuti pravac + Obrnuti smer @@ -4557,7 +4557,7 @@ normal vector of the face is used as direction Reverse direction - Reverse direction + Obrni smer @@ -4652,7 +4652,7 @@ normal vector of the face is used as direction Reverse direction - Reverse direction + Obrni smer @@ -4785,7 +4785,7 @@ normal vector of the face is used as direction Reverse Direction - Obrni pravac + Obrni smer diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index c9707430fe..6d4bcce2de 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -443,12 +443,12 @@ Sphere - Сфера + Лопта Cylinder - Цилиндар + Ваљак @@ -1341,7 +1341,7 @@ when the results dialog is opened Default solver - Default solver + Подразумевани алгоритам за решавање @@ -4236,7 +4236,7 @@ For possible variables, see the description box below. Reverse direction - Reverse direction + Обрни смер @@ -4304,7 +4304,7 @@ For possible variables, see the description box below. Reversed direction - Обрнути правац + Обрнути смер @@ -4557,7 +4557,7 @@ normal vector of the face is used as direction Reverse direction - Reverse direction + Обрни смер @@ -4652,7 +4652,7 @@ normal vector of the face is used as direction Reverse direction - Reverse direction + Обрни смер @@ -4785,7 +4785,7 @@ normal vector of the face is used as direction Reverse Direction - Обрнути правац + Обрнути смер diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 22432c7732..80275c7280 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -4415,7 +4415,7 @@ for the Emer solver Formula - Formula + Formel diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index c4bd811ee6..d48106c8cc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -291,7 +291,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -356,7 +356,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -513,7 +513,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -2159,7 +2159,7 @@ Specify another file please. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -2245,7 +2245,7 @@ Specify another file please. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -4111,7 +4111,7 @@ For possible variables, see the description box below. Object dependencies - 物件相依 + 物體相依 diff --git a/src/Mod/Inspection/Gui/Resources/Inspection.qrc b/src/Mod/Inspection/Gui/Resources/Inspection.qrc index c049f62723..8587b871d8 100644 --- a/src/Mod/Inspection/Gui/Resources/Inspection.qrc +++ b/src/Mod/Inspection/Gui/Resources/Inspection.qrc @@ -1,6 +1,39 @@ - - - icons/inspect_pipette.svg - icons/InspectionWorkbench.svg - - + + + icons/inspect_pipette.svg + icons/InspectionWorkbench.svg + translations/Inspection_fr.qm + translations/Inspection_hu.qm + translations/Inspection_pl.qm + translations/Inspection_ru.qm + translations/Inspection_eu.qm + translations/Inspection_be.qm + translations/Inspection_sl.qm + translations/Inspection_ka.qm + translations/Inspection_it.qm + translations/Inspection_hr.qm + translations/Inspection_zh-TW.qm + translations/Inspection_es-ES.qm + translations/Inspection_de.qm + translations/Inspection_sr.qm + translations/Inspection_sr-CS.qm + translations/Inspection_tr.qm + translations/Inspection_pt-BR.qm + translations/Inspection_cs.qm + translations/Inspection_ja.qm + translations/Inspection_ca.qm + translations/Inspection_nl.qm + translations/Inspection_ro.qm + translations/Inspection_uk.qm + translations/Inspection_zh-CN.qm + translations/Inspection_es-AR.qm + translations/Inspection_el.qm + translations/Inspection_sv-SE.qm + translations/Inspection_fi.qm + translations/Inspection_pt-PT.qm + translations/Inspection_val-ES.qm + translations/Inspection_gl.qm + translations/Inspection_ko.qm + translations/Inspection_id.qm + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.qm new file mode 100644 index 0000000000..7abd9db0bc Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.ts new file mode 100644 index 0000000000..d2302adfd2 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_be.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Даўгаваты + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Даўгаваты + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Аб'екты + + + + Nominal + Nominal + + + + Parameter + Налада + + + + Search distance + Search distance + + + + + mm + мм + + + + Thickness + Таўшчыня + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Заметка + + + + Leave info mode + Выйсці з інфармацыйнага рэжыму + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm new file mode 100644 index 0000000000..a0437220cf Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts new file mode 100644 index 0000000000..948916bce1 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspecció + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspecció + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objectes + + + + Nominal + Nominal + + + + Parameter + Paràmetre + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Gruix + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Anotació + + + + Leave info mode + Ix del mode info + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.qm new file mode 100644 index 0000000000..752bbcc64f Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.ts new file mode 100644 index 0000000000..fe251d2eba --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_cs.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Prohlížení + + + + Inspection... + Inspekce... + + + + Get distance information + Získejte informace o vzdálenosti + + + + CmdVisualInspection + + + Inspection + Prohlížení + + + + Visual inspection... + Vizuální kontrola... + + + + + Visual inspection + Vizuální kontrola + + + + Command + + + Visual Inspection + Vizuální kontrola + + + + InspectionGui::VisualInspection + + + Visual Inspection + Vizuální kontrola + + + + Actual + Aktuální + + + + + Objects + Objekty + + + + Nominal + Nominální + + + + Parameter + Parametr + + + + Search distance + Hledat podle vzdálenosti + + + + + mm + mm + + + + Thickness + Tloušťka + + + + QObject + + + Remove annotations + Odstranit anotace + + + + Do you want to remove all annotations? + Chcete odstranit všechny poznámky? + + + + Annotation + Vysvětlivka + + + + Leave info mode + Opustit info režim + + + + Distance: > %1 + Vzdálenost: > %1 + + + + Distance: < %1 + Vzdálenost: < %1 + + + + + Distance: %1 + Vzdálenost: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.qm new file mode 100644 index 0000000000..c4b223d335 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.ts new file mode 100644 index 0000000000..6f62a28f40 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_de.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Prüfmaß + + + + Inspection... + Kontrolle... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Prüfmaß + + + + Visual inspection... + Sichtkontrolle... + + + + + Visual inspection + Sichtkontrolle + + + + Command + + + Visual Inspection + Sichtkontrolle + + + + InspectionGui::VisualInspection + + + Visual Inspection + Sichtkontrolle + + + + Actual + Tatsächlich + + + + + Objects + Objekte + + + + Nominal + Nominal + + + + Parameter + Parameter + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Dicke + + + + QObject + + + Remove annotations + Anmerkungen entfernen + + + + Do you want to remove all annotations? + Möchtest du alle Anmerkungen entfernen? + + + + Annotation + Anmerkung + + + + Leave info mode + Info-Modus verlassen + + + + Distance: > %1 + Entfernung: > %1 + + + + Distance: < %1 + Entfernung: < %1 + + + + + Distance: %1 + Entfernung: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.qm new file mode 100644 index 0000000000..ff74e95c31 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.ts new file mode 100644 index 0000000000..eb17e4d39d --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_el.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspection + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspection + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Αντικείμενα + + + + Nominal + Nominal + + + + Parameter + Παράμετρος + + + + Search distance + Search distance + + + + + mm + χιλιοστά + + + + Thickness + Πάχος + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Σχολιασμός + + + + Leave info mode + Έξοδος από τη λειτουργία πληροφοριών + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.qm new file mode 100644 index 0000000000..1337f20f75 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.ts new file mode 100644 index 0000000000..c81a0546f0 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-AR.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspección + + + + Inspection... + Inspección... + + + + Get distance information + Obtener información de distancia + + + + CmdVisualInspection + + + Inspection + Inspección + + + + Visual inspection... + Inspección visual... + + + + + Visual inspection + Inspección visual + + + + Command + + + Visual Inspection + Inspección visual + + + + InspectionGui::VisualInspection + + + Visual Inspection + Inspección visual + + + + Actual + Actual + + + + + Objects + Objetos + + + + Nominal + Nominal + + + + Parameter + Parámetro + + + + Search distance + Buscar por distancia + + + + + mm + mm + + + + Thickness + Espesor + + + + QObject + + + Remove annotations + Eliminar anotaciones + + + + Do you want to remove all annotations? + ¿Desea eliminar todas las anotaciones? + + + + Annotation + Anotación + + + + Leave info mode + Salir del modo información + + + + Distance: > %1 + Distancia: > %1 + + + + Distance: < %1 + Distancia: < %1 + + + + + Distance: %1 + Distancia: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.qm new file mode 100644 index 0000000000..cc5c1ebcde Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.ts new file mode 100644 index 0000000000..bf7a304856 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_es-ES.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspección + + + + Inspection... + Inspección... + + + + Get distance information + Obtener información de distancia + + + + CmdVisualInspection + + + Inspection + Inspección + + + + Visual inspection... + Inspección visual... + + + + + Visual inspection + Inspección visual + + + + Command + + + Visual Inspection + Inspección visual + + + + InspectionGui::VisualInspection + + + Visual Inspection + Inspección visual + + + + Actual + Actual + + + + + Objects + Objetos + + + + Nominal + Nominal + + + + Parameter + Parámetro + + + + Search distance + Buscar por distancia + + + + + mm + mm + + + + Thickness + Espesor + + + + QObject + + + Remove annotations + Eliminar anotaciones + + + + Do you want to remove all annotations? + ¿Desea eliminar todas las anotaciones? + + + + Annotation + Anotación + + + + Leave info mode + Salir del modo información + + + + Distance: > %1 + Distancia: > %1 + + + + Distance: < %1 + Distancia: < %1 + + + + + Distance: %1 + Distancia: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.qm new file mode 100644 index 0000000000..f9fe96fbca Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.ts new file mode 100644 index 0000000000..88882fa1c4 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_eu.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Ikuskatzea + + + + Inspection... + Ikuskatzea... + + + + Get distance information + Eskuratu distantzia-informazioa + + + + CmdVisualInspection + + + Inspection + Ikuskatzea + + + + Visual inspection... + Ikusizko ikuskatzea... + + + + + Visual inspection + Ikusizko ikuskatzea + + + + Command + + + Visual Inspection + Ikusizko ikuskatzea + + + + InspectionGui::VisualInspection + + + Visual Inspection + Ikusizko ikuskatzea + + + + Actual + Unekoa + + + + + Objects + Objektuak + + + + Nominal + Izendatua + + + + Parameter + Parametroa + + + + Search distance + Bilaketa-distantzia + + + + + mm + mm + + + + Thickness + Lodiera + + + + QObject + + + Remove annotations + Kendu oharpenak + + + + Do you want to remove all annotations? + Oharpen guztiak kendu nahi dituzu? + + + + Annotation + Oharpena + + + + Leave info mode + Utzi informazio modua + + + + Distance: > %1 + Distantzia: > %1 + + + + Distance: < %1 + Distantzia: < %1 + + + + + Distance: %1 + Distantzia: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.qm new file mode 100644 index 0000000000..acaa0e61ec Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.ts new file mode 100644 index 0000000000..aa4e612fb5 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fi.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Tarkastuskupla + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Tarkastuskupla + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objektit + + + + Nominal + Nominal + + + + Parameter + Parametri + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Paksuus + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Huomautus + + + + Leave info mode + Poistu Tieto tilasta + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.qm new file mode 100644 index 0000000000..30aea3b58b Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.ts new file mode 100644 index 0000000000..22920d3bf8 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_fr.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Oblongue + + + + Inspection... + Inspection... + + + + Get distance information + Obtenir des informations sur la distance + + + + CmdVisualInspection + + + Inspection + Oblongue + + + + Visual inspection... + Inspection visuelle... + + + + + Visual inspection + Inspection visuelle + + + + Command + + + Visual Inspection + Inspection visuelle + + + + InspectionGui::VisualInspection + + + Visual Inspection + Inspection visuelle + + + + Actual + Réel + + + + + Objects + Objets + + + + Nominal + Nominal + + + + Parameter + Paramètre + + + + Search distance + Rayon de recherche + + + + + mm + mm + + + + Thickness + Evidement + + + + QObject + + + Remove annotations + Supprimer les annotations + + + + Do you want to remove all annotations? + Voulez-vous supprimer toutes les annotations ? + + + + Annotation + Annotation + + + + Leave info mode + Quitter le mode d'information + + + + Distance: > %1 + Distance : > %1 + + + + Distance: < %1 + Distance : < %1 + + + + + Distance: %1 + Distance : %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.qm new file mode 100644 index 0000000000..9723e1c70e Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.ts new file mode 100644 index 0000000000..6c4ffd709b --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_gl.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspección + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspección + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Obxectos + + + + Nominal + Nominal + + + + Parameter + Parámetro + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Grosor + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Apuntamento + + + + Leave info mode + Saír do modo de información + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.qm new file mode 100644 index 0000000000..cd66c082f3 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.ts new file mode 100644 index 0000000000..d29db990d4 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hr.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspekcija + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspekcija + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objekti + + + + Nominal + Nominal + + + + Parameter + Parametar + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Debljina + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Anotacija + + + + Leave info mode + Zatvori info način rada + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.qm new file mode 100644 index 0000000000..f57f60bc83 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.ts new file mode 100644 index 0000000000..f7f5b0f659 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_hu.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Vizsgálat + + + + Inspection... + Vizsgálat... + + + + Get distance information + Távolság információk lekérése + + + + CmdVisualInspection + + + Inspection + Vizsgálat + + + + Visual inspection... + Szemrevételezés... + + + + + Visual inspection + Szemrevételezés + + + + Command + + + Visual Inspection + Szemrevételezés + + + + InspectionGui::VisualInspection + + + Visual Inspection + Szemrevételezés + + + + Actual + Jelenlegi + + + + + Objects + Objektumok + + + + Nominal + Névleges + + + + Parameter + Paraméter + + + + Search distance + Távolság keresés + + + + + mm + mm + + + + Thickness + Vastagság + + + + QObject + + + Remove annotations + Megjegyzések eltávolítása + + + + Do you want to remove all annotations? + Szeretné eltávolítani az összes megjegyzést? + + + + Annotation + Jegyzet + + + + Leave info mode + Hagyja az info módot + + + + Distance: > %1 + Távolság: > %1 + + + + Distance: < %1 + Távolság: < %1 + + + + + Distance: %1 + Távolság: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.qm new file mode 100644 index 0000000000..3efa122b8a Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.ts new file mode 100644 index 0000000000..0c3e5d3fd1 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_id.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspection + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspection + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objects + + + + Nominal + Nominal + + + + Parameter + Parameter + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Thickness + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Anotasi + + + + Leave info mode + Tinggalkan info mode + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.qm new file mode 100644 index 0000000000..8fcc3ccc7a Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.ts new file mode 100644 index 0000000000..afe2230d34 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_it.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Ispezione + + + + Inspection... + Ispezione... + + + + Get distance information + Ottieni informazioni sulla distanza + + + + CmdVisualInspection + + + Inspection + Ispezione + + + + Visual inspection... + Ispezione visiva... + + + + + Visual inspection + Esame visivo + + + + Command + + + Visual Inspection + Ispezione Visiva + + + + InspectionGui::VisualInspection + + + Visual Inspection + Ispezione Visiva + + + + Actual + Attuale + + + + + Objects + Oggetti + + + + Nominal + Nominale + + + + Parameter + Parametro + + + + Search distance + Distanza ricerca + + + + + mm + mm + + + + Thickness + Spessore + + + + QObject + + + Remove annotations + Rimuovi annotazioni + + + + Do you want to remove all annotations? + Vuoi rimuovere tutte le annotazioni? + + + + Annotation + Annotazione + + + + Leave info mode + Esci dalla modalità info + + + + Distance: > %1 + Distanza: > %1 + + + + Distance: < %1 + Distanza: < %1 + + + + + Distance: %1 + Distanza %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.qm new file mode 100644 index 0000000000..fed0935b43 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.ts new file mode 100644 index 0000000000..f3baf7d5c0 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ja.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + 検査 + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + 検査 + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + オブジェクト + + + + Nominal + Nominal + + + + Parameter + パラメーター + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + 厚み + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + 注釈 + + + + Leave info mode + 情報モードを解除 + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.qm new file mode 100644 index 0000000000..245eba22d4 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.ts new file mode 100644 index 0000000000..9cd926cff4 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ka.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + მომრგვალებული მართკუთხედი + + + + Inspection... + შემოწმება... + + + + Get distance information + მანძილის შესახებ ინფორმაციის მიღება + + + + CmdVisualInspection + + + Inspection + მომრგვალებული მართკუთხედი + + + + Visual inspection... + ვიზუალური შემოწმება... + + + + + Visual inspection + ვიზუალური შემოწმება + + + + Command + + + Visual Inspection + ვიზუალური შემოწმება + + + + InspectionGui::VisualInspection + + + Visual Inspection + ვიზუალური შემოწმება + + + + Actual + რეალური + + + + + Objects + ობიექტები + + + + Nominal + ნომინალური + + + + Parameter + პარამეტრი + + + + Search distance + ძებნის მანძილი + + + + + mm + მმ + + + + Thickness + სისქე + + + + QObject + + + Remove annotations + ანოტაციების წაშლა + + + + Do you want to remove all annotations? + გსურთ, წაშალოთ ყველა ანოტაცია? + + + + Annotation + შენიშვნა + + + + Leave info mode + საინფორმაციო რეჟიმიდან გასვლა + + + + Distance: > %1 + დაშორება: > %1 + + + + Distance: < %1 + დაშორება: < %1 + + + + + Distance: %1 + დაშორება: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.qm new file mode 100644 index 0000000000..a0e5d9903e Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.ts new file mode 100644 index 0000000000..7b0cb9d68c --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ko.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspection + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspection + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + 오브젝트 + + + + Nominal + Nominal + + + + Parameter + 매개 변수 + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + 두께 + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Annotation + + + + Leave info mode + Leave info mode + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm new file mode 100644 index 0000000000..e14674e21d Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts new file mode 100644 index 0000000000..6dc218d967 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspectie + + + + Inspection... + Inspectie... + + + + Get distance information + Verkrijg informatie over afstand + + + + CmdVisualInspection + + + Inspection + Inspectie + + + + Visual inspection... + Visuele inspectie... + + + + + Visual inspection + Visuele inspectie + + + + Command + + + Visual Inspection + Visuele inspectie + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visuele inspectie + + + + Actual + Actueel + + + + + Objects + Objecten + + + + Nominal + Nominaal + + + + Parameter + Parameter + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Dikte + + + + QObject + + + Remove annotations + Verwijder aantekeningen + + + + Do you want to remove all annotations? + Wil je alle aantekeningen verwijderen? + + + + Annotation + Aantekening + + + + Leave info mode + Info modus verlaten + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm new file mode 100644 index 0000000000..562965c3ce Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts new file mode 100644 index 0000000000..41d0ee4f70 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspekcja + + + + Inspection... + Kontrola ... + + + + Get distance information + Uzyskaj informacje o odległości + + + + CmdVisualInspection + + + Inspection + Inspekcja + + + + Visual inspection... + Kontrola wzrokowa ... + + + + + Visual inspection + Kontrola wzrokowa + + + + Command + + + Visual Inspection + Kontrola wzrokowa + + + + InspectionGui::VisualInspection + + + Visual Inspection + Kontrola wzrokowa + + + + Actual + Aktualna + + + + + Objects + Obiekty + + + + Nominal + Nominalna + + + + Parameter + Parametry + + + + Search distance + Odległość poszukiwania + + + + + mm + mm + + + + Thickness + Grubość + + + + QObject + + + Remove annotations + Usuń adnotacje + + + + Do you want to remove all annotations? + Czy chcesz usunąć wszystkie adnotacje? + + + + Annotation + Adnotacja + + + + Leave info mode + Opuść tryb informacyjny + + + + Distance: > %1 + Odległość: > %1 + + + + Distance: < %1 + Odległość: < %1 + + + + + Distance: %1 + Odległość: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.qm new file mode 100644 index 0000000000..9ca41affbf Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.ts new file mode 100644 index 0000000000..27b76082a0 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-BR.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspeção + + + + Inspection... + Inspeção... + + + + Get distance information + Obter informações de distância + + + + CmdVisualInspection + + + Inspection + Inspeção + + + + Visual inspection... + Inspeção Visual... + + + + + Visual inspection + Inspeção Visual + + + + Command + + + Visual Inspection + Inspeção Visual + + + + InspectionGui::VisualInspection + + + Visual Inspection + Inspeção Visual + + + + Actual + Actual + + + + + Objects + Objetos + + + + Nominal + Nominal + + + + Parameter + Parâmetro + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Espessura + + + + QObject + + + Remove annotations + Remover anotações + + + + Do you want to remove all annotations? + Você deseja remover todas as anotações? + + + + Annotation + Anotação + + + + Leave info mode + Sair do modo de info + + + + Distance: > %1 + Distância: > %1 + + + + Distance: < %1 + Distância: < %1 + + + + + Distance: %1 + Distância: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.qm new file mode 100644 index 0000000000..e6e53ef49c Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.ts new file mode 100644 index 0000000000..08a913e528 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pt-PT.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspecção + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspecção + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objetos + + + + Nominal + Nominal + + + + Parameter + Parâmetro + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Espessura + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Anotação + + + + Leave info mode + Sair do modo de informação + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.qm new file mode 100644 index 0000000000..f9db731315 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.ts new file mode 100644 index 0000000000..5a4e072992 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ro.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspecție + + + + Inspection... + Inspecție... + + + + Get distance information + Obțineți informații de distanță + + + + CmdVisualInspection + + + Inspection + Inspecție + + + + Visual inspection... + Inspecție vizuală... + + + + + Visual inspection + Inspecție vizuală + + + + Command + + + Visual Inspection + Inspecție vizuală + + + + InspectionGui::VisualInspection + + + Visual Inspection + Inspecție vizuală + + + + Actual + Actuală + + + + + Objects + Obiecte + + + + Nominal + Nominală + + + + Parameter + Parametru + + + + Search distance + Distanța căutării + + + + + mm + mm + + + + Thickness + Grosime + + + + QObject + + + Remove annotations + Elimină adnotările + + + + Do you want to remove all annotations? + Doriţi să eliminaţi toate adnotările? + + + + Annotation + Notatie + + + + Leave info mode + Parasiti modul informare + + + + Distance: > %1 + Distanță: > %1 + + + + Distance: < %1 + Distanță: < %1 + + + + + Distance: %1 + Distanță: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.qm new file mode 100644 index 0000000000..2fe6559822 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.ts new file mode 100644 index 0000000000..2910d723d8 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ru.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Скругленный прямоугольник + + + + Inspection... + Проверка... + + + + Get distance information + Получить информацию о расстоянии + + + + CmdVisualInspection + + + Inspection + Скругленный прямоугольник + + + + Visual inspection... + Визуальная проверка... + + + + + Visual inspection + Визуальная проверка + + + + Command + + + Visual Inspection + Визуальная проверка + + + + InspectionGui::VisualInspection + + + Visual Inspection + Визуальная проверка + + + + Actual + Фактический + + + + + Objects + Объекты + + + + Nominal + Номинальный + + + + Parameter + Параметр + + + + Search distance + Поиск расстояния + + + + + mm + мм + + + + Thickness + Толщина + + + + QObject + + + Remove annotations + Удалить аннотации + + + + Do you want to remove all annotations? + Вы хотите удалить все аннотации? + + + + Annotation + Заметка + + + + Leave info mode + Выйти из информационного режима + + + + Distance: > %1 + Расстояние: > %1 + + + + Distance: < %1 + Расстояние: < %1 + + + + + Distance: %1 + Расстояние: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.qm new file mode 100644 index 0000000000..85f92cfd78 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.ts new file mode 100644 index 0000000000..671d58ac17 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sl.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Pokrožen pravokotnik + + + + Inspection... + Pregled ... + + + + Get distance information + Pridobi podatek o razdalji + + + + CmdVisualInspection + + + Inspection + Pokrožen pravokotnik + + + + Visual inspection... + Vidni pregled ... + + + + + Visual inspection + Vidni pregled + + + + Command + + + Visual Inspection + Vidni pregled + + + + InspectionGui::VisualInspection + + + Visual Inspection + Vidni pregled + + + + Actual + Dejanska + + + + + Objects + Predmeti + + + + Nominal + Nazivna + + + + Parameter + Določilka + + + + Search distance + Iskanje razdalje + + + + + mm + mm + + + + Thickness + Debelina + + + + QObject + + + Remove annotations + Odstrani pripise + + + + Do you want to remove all annotations? + Ali želite odstraniti vse pripise? + + + + Annotation + Opis + + + + Leave info mode + Zapusti podatkovni način + + + + Distance: > %1 + Razdalja: > %1 + + + + Distance: < %1 + Razdalja: < %1 + + + + + Distance: %1 + Razdalja: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.qm new file mode 100644 index 0000000000..4d40f379fb Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.ts new file mode 100644 index 0000000000..54e3e74df2 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr-CS.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Provera + + + + Inspection... + Provera... + + + + Get distance information + Informacje o rastojanju + + + + CmdVisualInspection + + + Inspection + Provera + + + + Visual inspection... + Vizuelni pregled... + + + + + Visual inspection + Vizuelni pregled + + + + Command + + + Visual Inspection + Vizuelni pregled + + + + InspectionGui::VisualInspection + + + Visual Inspection + Vizuelni pregled + + + + Actual + Stvarno + + + + + Objects + Predmeti + + + + Nominal + Nazivno + + + + Parameter + Parametar + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Debljina + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Napomena + + + + Leave info mode + Napusti info režim + + + + Distance: > %1 + Rastojanje: > %1 + + + + Distance: < %1 + Rastojanje: < %1 + + + + + Distance: %1 + Rastojanje: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.qm new file mode 100644 index 0000000000..2799cb2d40 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.ts new file mode 100644 index 0000000000..45dffa7d32 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sr.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Провера + + + + Inspection... + Провера... + + + + Get distance information + Информације о растојању + + + + CmdVisualInspection + + + Inspection + Провера + + + + Visual inspection... + Визуелни преглед... + + + + + Visual inspection + Визуелни преглед + + + + Command + + + Visual Inspection + Визуелни преглед + + + + InspectionGui::VisualInspection + + + Visual Inspection + Визуелни преглед + + + + Actual + Стварно + + + + + Objects + Предмети + + + + Nominal + Називно + + + + Parameter + Параметар + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Дебљина + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Напомена + + + + Leave info mode + Напусти инфо режим + + + + Distance: > %1 + Растојање: > %1 + + + + Distance: < %1 + Растојање: < %1 + + + + + Distance: %1 + Растојање: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.qm new file mode 100644 index 0000000000..95ad515f34 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.ts new file mode 100644 index 0000000000..42a26e5c82 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_sv-SE.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspektion + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspektion + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objekt + + + + Nominal + Nominal + + + + Parameter + Parameter + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Tjocklek + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Annotering + + + + Leave info mode + Lämna info läge + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm new file mode 100644 index 0000000000..b147961676 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts new file mode 100644 index 0000000000..ca9e60eac3 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + İnceleme + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + İnceleme + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Nesneler + + + + Nominal + Nominal + + + + Parameter + Parametre + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Kalınlık + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Not + + + + Leave info mode + Bilgi modundan çık + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.qm new file mode 100644 index 0000000000..30c582f88b Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.ts new file mode 100644 index 0000000000..b1782b1b2e --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_uk.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspection + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspection + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Об'єкти + + + + Nominal + Nominal + + + + Parameter + Параметр + + + + Search distance + Search distance + + + + + mm + мм + + + + Thickness + Товщина + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Анотація + + + + Leave info mode + Вийти з інформаційного режиму + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.qm new file mode 100644 index 0000000000..56e3da5fd7 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.ts new file mode 100644 index 0000000000..3204453ac1 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_val-ES.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + Inspecció + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + Inspecció + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + Objectes + + + + Nominal + Nominal + + + + Parameter + Paràmetre + + + + Search distance + Search distance + + + + + mm + mm + + + + Thickness + Gruix + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + Anotació + + + + Leave info mode + Ix del mode info + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.qm new file mode 100644 index 0000000000..cad9206723 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.ts new file mode 100644 index 0000000000..3235ba9a00 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-CN.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + 检查 + + + + Inspection... + 检查... + + + + Get distance information + 获取距离信息 + + + + CmdVisualInspection + + + Inspection + 检查 + + + + Visual inspection... + 可视性检查... + + + + + Visual inspection + 可视性检查 + + + + Command + + + Visual Inspection + 可视性检查 + + + + InspectionGui::VisualInspection + + + Visual Inspection + 可视性检查 + + + + Actual + 实际的 + + + + + Objects + 对象 + + + + Nominal + Nominal + + + + Parameter + 参数 + + + + Search distance + 搜索距离 + + + + + mm + 毫米 + + + + Thickness + 厚度 + + + + QObject + + + Remove annotations + 移除标注 + + + + Do you want to remove all annotations? + 你想移除所有标注吗？ + + + + Annotation + 注释 + + + + Leave info mode + 退出查询模式 + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.qm new file mode 100644 index 0000000000..47786e5b61 Binary files /dev/null and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.ts new file mode 100644 index 0000000000..ef6d073b07 --- /dev/null +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_zh-TW.ts @@ -0,0 +1,133 @@ + + + + + CmdInspectElement + + + Inspection + 檢查 + + + + Inspection... + Inspection... + + + + Get distance information + Get distance information + + + + CmdVisualInspection + + + Inspection + 檢查 + + + + Visual inspection... + Visual inspection... + + + + + Visual inspection + Visual inspection + + + + Command + + + Visual Inspection + Visual Inspection + + + + InspectionGui::VisualInspection + + + Visual Inspection + Visual Inspection + + + + Actual + Actual + + + + + Objects + 物件 + + + + Nominal + Nominal + + + + Parameter + 參數 + + + + Search distance + Search distance + + + + + mm +  mm + + + + Thickness + 厚度 + + + + QObject + + + Remove annotations + Remove annotations + + + + Do you want to remove all annotations? + Do you want to remove all annotations? + + + + Annotation + 注釋 + + + + Leave info mode + 離開訊息模式 + + + + Distance: > %1 + Distance: > %1 + + + + Distance: < %1 + Distance: < %1 + + + + + Distance: %1 + Distance: %1 + + + diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index 98c320b090..f400062b26 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -2429,7 +2429,7 @@ Bitte besuchen Sie http://www.openscad.org/index.html, um es zu installieren. Boolean - Bool'sche Operationen + Boolesche Verknüpfungen diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index 14ebdcd586..434f39e40c 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -2468,7 +2468,7 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować. Mesh segmentation - Segmentacja siatki + Siatka — segmentacja diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index cc8d87e05e..f7cc800e7b 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -87,14 +87,14 @@ Decimation... - Decimation... + Zecimație... Decimates a mesh - Decimates a mesh + Decimates a mesh @@ -467,13 +467,13 @@ Refinement... - Refinement... + Rafinare... Refine existing mesh - Refine existing mesh + Rafinează plasa existentă @@ -618,12 +618,12 @@ Split by components - Split by components + Împărțiți de componente Split selected mesh into its components - Split selected mesh into its components + Împarte ochiurile selectate în componentele sale @@ -740,7 +740,7 @@ Mesh Create - Mesh Create + Mesh Crează @@ -750,68 +750,68 @@ Mesh union - Mesh union + Sindicatul plasei Mesh difference - Mesh difference + Diferenţa de plasă Mesh intersection - Mesh intersection + Intersecţie plasă Import Mesh - Import Mesh + Importă plasa Mesh VertexCurvature - Mesh VertexCurvature + VertexCurvatura plasei Mesh Smoothing - Mesh Smoothing + Smoothing pentru plasă Harmonize mesh normals - Harmonize mesh normals + Armonizeaza normalele Flip mesh normals - Flip mesh normals + Inversează normalele Fill up holes - Fill up holes + Umple găurile Mesh merge - Mesh merge + Fuzionarea plasei Mesh split - Mesh split + Divizare plasă Mesh scale - Mesh scale + Scară plasă Mesh Decimating - Mesh Decimating + Decimare plasă @@ -821,47 +821,47 @@ Remove non-manifolds - Remove non-manifolds + Elimină alte pliuri Fix indices - Fix indices + Repară indicii Remove degenerated faces - Remove degenerated faces + Elimină fațete degenerate Remove duplicated faces - Remove duplicated faces + Se elimină fișierele duplicat Remove duplicated points - Remove duplicated points + Se elimină fișierele duplicat Fix self-intersections - Fix self-intersections + Repară auto-intersecțiile Remove folds - Remove folds + Elimină îndoiturile Repair mesh - Repair mesh + Reparare plasă Delete selection - Delete selection + Ştergere @@ -883,7 +883,7 @@ Segment - Segment + Segment @@ -893,7 +893,7 @@ Fill hole - Fill hole + Umple gaura @@ -901,12 +901,12 @@ Decimating - Decimating + Decimare Reduction - Reduction + Reducere @@ -916,13 +916,13 @@ Full - Full + Complet Absolute number - Absolute number + Număr absolut @@ -932,7 +932,7 @@ Absolute number (Maximum: %1) - Absolute number (Maximum: %1) + Număr absolut (Maxim: %1) @@ -1419,12 +1419,12 @@ Rulati mai intai comanda de reparare a pliurilor Deviation of tessellation to the actual surface - Deviation of tessellation to the actual surface + Desemnarea navelei la suprafaţa reală <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Definește deviația maximă a ochiurilor fără margini la suprafață. Cu cât valoarea este mai mică cu atât viteza de randare este mai lentă, ceea ce duce la creșterea detaliilor/rezoluției</span></p></body></html> @@ -1434,12 +1434,12 @@ Rulati mai intai comanda de reparare a pliurilor Maximal deviation between mesh and object - Maximal deviation between mesh and object + Deviație maximă între plasă și obiect ZIP compression is used when writing a mesh file in AMF format - ZIP compression is used when writing a mesh file in AMF format + Compresia ZIP este folosită atunci când scrieți un fișier 3D în format AMF @@ -1483,7 +1483,7 @@ is used when writing a file in AMF format Default color for new meshes - Default color for new meshes + Culoare implicită pentru plasele noi @@ -1498,7 +1498,7 @@ is used when writing a file in AMF format Default line color for new meshes - Default line color for new meshes + Culoarea implicită a liniei pentru plasele noi @@ -1516,10 +1516,10 @@ is used when writing a file in AMF format If not checked, it depends on the option "Enable backlight color" (preferences section Display -> 3D View). Either the backlight color will be used or black. - The bottom side of surface will be rendered the same way than top side. -If not checked, it depends on the option "Enable backlight color" -(preferences section Display -> 3D View). Either the backlight color -will be used or black. + Partea de jos a suprafeţei va fi randată în acelaşi mod ca în partea de sus. +Dacă nu este bifat, depinde de opțiunea "Activează culoarea iluminării de fundal" +(secțiunea de preferințe Display -> 3D View). Culoarea de fundal +va fi folosită sau neagră. @@ -1529,7 +1529,7 @@ will be used or black. A bounding box will be displayed - A bounding box will be displayed + O casetă de încadrare va fi afișată @@ -1550,12 +1550,12 @@ With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. - If this option is set Phong shading is used, otherwise flat shading. -Shading defines the appearance of surfaces. + Dacă această opțiune este setată se folosește umbra Phong-ului, altfel plană umbră. +Shading definește aspectul suprafețelor. -With flat shading the surface normals are not defined per vertex that leads -to a unreal appearance for curved surfaces while using Phong shading leads -to a smoother appearance. +Cu umbra plană, suprafaţa normală nu este definită per vertex care duce +la un aspect neadevărat pentru suprafeţele curbate în timp ce folosirea decupării Phong conduce +la un aspect mai uşor. @@ -1566,12 +1566,12 @@ to a smoother appearance. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Acesta este cel mai mic unghi dintre două fețe în care normalele sunt calculate pentru a face umbră plană.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Dacă unghiul dintre cele două feţe vecine este mai mic decât unghiul de îndoitură, fețele vor fi lipite în jurul marginii lor comune.</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Sint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definirea normalelor per vertex se numeşte de asemenea <span style=" font-style:italic;">Umbrare Phong</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">în timp ce definirea normalelor pe faţă se numeşte </span>Umbră<span style=" font-style:normal;">.</span></p></body></html> @@ -1584,10 +1584,10 @@ to a smoother appearance. If face angle ≥ crease angle, facet shading is used If face angle < crease angle, smooth shading is used - Crease angle is a threshold angle between two faces. + Unghiul de crează este un unghi de prag între două fețe. - If face angle ≥ crease angle, facet shading is used - If face angle < crease angle, smooth shading is used + Dacă unghiul feței ≥ unghiul de înclinare, este folosită umbra fațetei + Dacă unghiul feței < unghiul de crează, este folosită umbra fără probleme @@ -1648,22 +1648,22 @@ to a smoother appearance. Adaptive - Adaptive + Adaptiv Frontal - Frontal + Față Frontal Quad - Frontal Quad + Quad frontal Parallelograms - Parallelograms + Paralelograme @@ -1674,12 +1674,12 @@ to a smoother appearance. Running gmsh... - Running gmsh... + Rulare gmsh... Failed to start - Failed to start + Pornirea a eșuat @@ -1771,27 +1771,27 @@ to a smoother appearance. Remesh by Gmsh - Remesh by Gmsh + Remesh de Gmsh Remeshing Parameter - Remeshing Parameter + Parametrul de reamintire Meshing: - Meshing: + Meshing: Max element size (0.0 = Auto): - Max element size (0.0 = Auto): + Dimensiunea maximă a elementului (0,0 = Auto): Min element size (0.0 = Auto): - Min element size (0.0 = Auto): + Dimensiunea minimă a elementului (0,0 = Auto): @@ -1801,7 +1801,7 @@ to a smoother appearance. Gmsh - Gmsh + Zgură @@ -1811,7 +1811,7 @@ to a smoother appearance. Kill - Kill + Termina @@ -2111,33 +2111,33 @@ to a smoother appearance. Number of facets: - Number of facets: + Număr de fațete: Minimum bound: - Minimum bound: + Limită minimă: Maximum bound: - Maximum bound: + Limita maximă: Mesh info box - Mesh info box + Mesh info box Mesh info - Mesh info + Informații plasă X: %1 Y: %2 Z: %3 - X: %1 Y: %2 Z: %3 + X: %1 <unk> Y: %2 <unk> Z: %3 @@ -2231,7 +2231,7 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Inventor V2.1 ASCII - Inventor V2.1 ASCII + Inventor V2.1 ASCII @@ -2242,7 +2242,7 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. NASTRAN - NASTRAN + NASTRAN @@ -2273,12 +2273,12 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Compressed X3D - Compressed X3D + X3D comprimat WebGL/X3D - WebGL/X3D + WebGL/X3D @@ -2303,12 +2303,12 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Asymptote Format - Asymptote Format + Format Asimptote 3D Manufacturing Format - 3D Manufacturing Format + Format Producție 3D @@ -2378,12 +2378,12 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Display segments - Display segments + Afișare segmente Display colors - Display colors + Culoarea afișajului @@ -2452,17 +2452,17 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Mesh modify - Mesh modify + Modificare plasă Mesh boolean - Mesh boolean + Plasă Boolean Mesh cutting - Mesh cutting + Butoi cu plasă @@ -2472,7 +2472,7 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Mesh analyze - Mesh analyze + Analiza plasei diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts index dca2a75cc8..b2bda6eeec 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts @@ -1288,7 +1288,7 @@ Pokreni prvo komandu za popravku nabora Cylinder - Cilindar + Valjak @@ -1298,7 +1298,7 @@ Pokreni prvo komandu za popravku nabora Sphere - Sfera + Lopta @@ -1938,7 +1938,7 @@ to a smoother appearance. Cylinder - Cilindar + Valjak @@ -1959,7 +1959,7 @@ to a smoother appearance. Sphere - Sfera + Lopta @@ -2013,12 +2013,12 @@ to a smoother appearance. Cylinder - Cilindar + Valjak Sphere - Sfera + Lopta diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts index 9f0cb0fad7..01130a8e89 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts @@ -1288,7 +1288,7 @@ Please run the command to repair folds first Cylinder - Цилиндар + Ваљак @@ -1298,7 +1298,7 @@ Please run the command to repair folds first Sphere - Сфера + Лопта @@ -1938,7 +1938,7 @@ to a smoother appearance. Cylinder - Цилиндар + Ваљак @@ -1959,7 +1959,7 @@ to a smoother appearance. Sphere - Сфера + Лопта @@ -2013,12 +2013,12 @@ to a smoother appearance. Cylinder - Цилиндар + Ваљак Sphere - Сфера + Лопта diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 78424866eb..8fd39cc2cd 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -341,7 +341,7 @@ Intersection - 交集 + 交錯 @@ -1380,7 +1380,7 @@ Please run the command to repair folds first Cl&ose - &關閉 + 關閉(&O) diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts index ca7826a08d..fc3cd88bac 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts @@ -220,9 +220,9 @@ Tento příkaz pracuje pouze s objektem typu 'mesh'. Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. This command only works with a 'mesh' object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh Workbench. - Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. + Stiskněte 'Start' a vyberte body na síti; po nastavení dostatečného počtu bodů klikněte pravým tlačítkem myši a zvolte „Vytvořit“. Tento postup opakujte, chcete-li vytvořit další spline. Pro dokončení operace zavřete tento panel úloh. -This command only works with a 'mesh' object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh Workbench. +Tento příkaz funguje pouze s „síťovým“ objektem, nikoli s běžnou plochou nebo plochou. Chcete-li převést objekt na síť, použijte nástroje Mesh Workbench. @@ -232,7 +232,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Snap tolerance to vertices - Snap tolerance to vertices + Tolerance přichycení k vrcholům @@ -290,7 +290,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Use the standard mesher - Use the standard mesher + Použijte standardní síťku @@ -300,7 +300,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Maximal linear deflection of a mesh section from the surface of the object - Maximal linear deflection of a mesh section from the surface of the object + Maximální lineární průhyb úseku sítě od povrchu objektu @@ -310,14 +310,14 @@ This command only works with a 'mesh' object, not a regular face or surface. To Maximal angular deflection of a mesh section to the next section - Maximal angular deflection of a mesh section to the next section + Maximální úhlové vychýlení části sítě do další části The maximal linear deviation of a mesh segment will be the specified Surface deviation multiplied by the length of the current mesh segment (edge) - The maximal linear deviation of a mesh segment will be the specified -Surface deviation multiplied by the length of the current mesh segment (edge) + Maximální lineární odchylka segmentu sítě bude zadaná +Odchylka povrchu vynásobená délkou aktuálního segmentu sítě (hrany) @@ -327,7 +327,7 @@ Surface deviation multiplied by the length of the current mesh segment (edge) Mesh will get face colors of the object - Mesh will get face colors of the object + Síť získá obličejové barvy objektu @@ -339,9 +339,9 @@ Surface deviation multiplied by the length of the current mesh segment (edge)Mesh segments will be grouped according to the color of the object faces. These groups will be exported for mesh output formats supporting this feature (e.g. the format OBJ). - Mesh segments will be grouped according to the color of the object faces. -These groups will be exported for mesh output formats supporting -this feature (e.g. the format OBJ). + Segmenty sítě budou seskupeny podle barvy ploch objektu. +Tyto skupiny budou exportovány pro podporu výstupních formátů sítě +tuto funkci (např. formát OBJ). @@ -356,7 +356,7 @@ this feature (e.g. the format OBJ). Use the Mefisto mesher - Use the Mefisto mesher + Použijte síťku Mefisto @@ -367,8 +367,8 @@ this feature (e.g. the format OBJ). If this number is smaller the mesh becomes finer. The smallest value is 0. - If this number is smaller the mesh becomes finer. -The smallest value is 0. + Pokud je toto číslo menší, síť bude jemnější. +Nejmenší hodnota je 0. @@ -383,7 +383,7 @@ The smallest value is 0. Use the Netgen mesher - Use the Netgen mesher + Použijte síťovou síť Netgen @@ -429,8 +429,8 @@ The smallest value is 0. If this parameter is smaller, the mesh becomes finer. A value in the range of 0.1-1. - If this parameter is smaller, the mesh becomes finer. -A value in the range of 0.1-1. + Pokud je tento parametr menší, síť bude jemnější. +Hodnota v rozsahu 0,1-1. @@ -442,8 +442,8 @@ A value in the range of 0.1-1. If this parameter is larger, the mesh becomes finer. A value in the range of 0.2-10. - If this parameter is larger, the mesh becomes finer. -A value in the range of 0.2-10. + Pokud je tento parametr větší, síť bude jemnější. +Hodnota v rozmezí 0.2-10. @@ -453,7 +453,7 @@ A value in the range of 0.2-10. Whether optimization of surface shape will be done - Whether optimization of surface shape will be done + Zda bude provedena optimalizace tvaru povrchu @@ -463,7 +463,7 @@ A value in the range of 0.2-10. Whether second order elements will be generated - Whether second order elements will be generated + Zda budou generovány prvky druhého řádu @@ -473,7 +473,7 @@ A value in the range of 0.2-10. Whether meshes will be arranged preferably using quadrilateral faces - Whether meshes will be arranged preferably using quadrilateral faces + Zda budou sítě uspořádány přednostně pomocí čtyřúhelníkových ploch @@ -500,15 +500,15 @@ A value in the range of 0.2-10. You have selected a body without tip. Either set the tip of the body or select a different shape, please. - You have selected a body without tip. -Either set the tip of the body or select a different shape, please. + Vybrali jste tělo bez špičky. +Buď nastavte špičku těla nebo vyberte jiný tvar, prosím. You have selected a shape without faces. Select a different shape, please. - You have selected a shape without faces. -Select a different shape, please. + Vybrali jste tvar bez ploch. +Vyberte jiný tvar, prosím. @@ -580,12 +580,12 @@ Select a different shape, please. Unwrap Mesh - Unwrap Mesh + Rozbalte síť Find a flat representation of a mesh. - Find a flat representation of a mesh. + Najděte ploché znázornění sítě. @@ -593,12 +593,12 @@ Select a different shape, please. Unwrap Face - Unwrap Face + Rozbalit obličej Find a flat representation of a face. - Find a flat representation of a face. + Najděte ploché znázornění sítě. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts index 81941a8c21..c09c77a8a4 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts @@ -170,7 +170,7 @@ This command only works with a 'mesh' object. Connect edges if distance less than - + Failure Failure @@ -491,27 +491,27 @@ A value in the range of 0.2-10. Gmsh - - + + No active document Tidak ada dokumen aktif - + You have selected a body without tip. Either set the tip of the body or select a different shape, please. You have selected a body without tip. Either set the tip of the body or select a different shape, please. - + You have selected a shape without faces. Select a different shape, please. You have selected a shape without faces. Select a different shape, please. - + Select a shape for meshing, first. Pilih bentuk untuk meshing, pertama. @@ -575,4 +575,30 @@ Select a different shape, please. MeshPart + + MeshPart_CreateFlatMesh + + + Unwrap Mesh + Unwrap Mesh + + + + Find a flat representation of a mesh. + Find a flat representation of a mesh. + + + + MeshPart_CreateFlatFace + + + Unwrap Face + Unwrap Face + + + + Find a flat representation of a face. + Find a flat representation of a face. + + diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts index e9053d6b5c..b1056c10e6 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts @@ -99,12 +99,12 @@ Această comandă funcționează doar cu un obiect 'plasă'. Trim with plane - Trim with plane + Secționat de un plan Section with plane - Section with plane + Secţiune cu plan @@ -167,12 +167,12 @@ Această comandă funcționează doar cu un obiect 'plasă'. Connect edges if distance less than - Connect edges if distance less than + Conectează marginile dacă distanța este mai mică de Failure - Failure + Eșec @@ -290,7 +290,7 @@ Această comandă funcționează doar cu un obiect 'plasă', nu cu o față sau Use the standard mesher - Use the standard mesher + Utilizaţi plasa standard @@ -300,7 +300,7 @@ Această comandă funcționează doar cu un obiect 'plasă', nu cu o față sau Maximal linear deflection of a mesh section from the surface of the object - Maximal linear deflection of a mesh section from the surface of the object + Deformarea liniară maximă a unei secțiuni de plasă de pe suprafața obiectului @@ -310,14 +310,14 @@ Această comandă funcționează doar cu un obiect 'plasă', nu cu o față sau Maximal angular deflection of a mesh section to the next section - Maximal angular deflection of a mesh section to the next section + Deformarea maximă unghiulară a unei secțiuni cu ochiuri la secțiunea următoare The maximal linear deviation of a mesh segment will be the specified Surface deviation multiplied by the length of the current mesh segment (edge) - The maximal linear deviation of a mesh segment will be the specified -Surface deviation multiplied by the length of the current mesh segment (edge) + Deviația liniară maximă a unui segment de plasă va fi specificată +Deviația de suprafață înmulțită cu lungimea segmentului de plasă curent (margine) @@ -327,7 +327,7 @@ Surface deviation multiplied by the length of the current mesh segment (edge) Mesh will get face colors of the object - Mesh will get face colors of the object + Mesh va obține culorile feței obiectului @@ -339,9 +339,9 @@ Surface deviation multiplied by the length of the current mesh segment (edge)Mesh segments will be grouped according to the color of the object faces. These groups will be exported for mesh output formats supporting this feature (e.g. the format OBJ). - Mesh segments will be grouped according to the color of the object faces. -These groups will be exported for mesh output formats supporting -this feature (e.g. the format OBJ). + Segmentele de plasă vor fi grupate în funcție de culoarea fețelor obiectului. +Aceste grupuri vor fi exportate pentru formatele de ieșire Plasă +această caracteristică (de ex. formatul OBJ). @@ -356,7 +356,7 @@ this feature (e.g. the format OBJ). Use the Mefisto mesher - Use the Mefisto mesher + Folosiți plasa Mefisto @@ -367,13 +367,13 @@ this feature (e.g. the format OBJ). If this number is smaller the mesh becomes finer. The smallest value is 0. - If this number is smaller the mesh becomes finer. -The smallest value is 0. + Dacă acest număr este mai mic, plasa devine mai mică. +Cea mai mică valoare este 0. Estimate - Estimate + Estimare @@ -383,7 +383,7 @@ The smallest value is 0. Use the Netgen mesher - Use the Netgen mesher + Utilizează plasa Netgen @@ -429,8 +429,8 @@ The smallest value is 0. If this parameter is smaller, the mesh becomes finer. A value in the range of 0.1-1. - If this parameter is smaller, the mesh becomes finer. -A value in the range of 0.1-1. + Dacă acest parametru este mai mic, ochiul devine mai mic. +O valoare în intervalul 0.1-1. @@ -442,8 +442,8 @@ A value in the range of 0.1-1. If this parameter is larger, the mesh becomes finer. A value in the range of 0.2-10. - If this parameter is larger, the mesh becomes finer. -A value in the range of 0.2-10. + Dacă acest parametru este mai mare, Plasă devine mai bun. +O valoare în intervalul 0.2-10. @@ -453,7 +453,7 @@ A value in the range of 0.2-10. Whether optimization of surface shape will be done - Whether optimization of surface shape will be done + Dacă se va realiza optimizarea formei suprafeței @@ -463,7 +463,7 @@ A value in the range of 0.2-10. Whether second order elements will be generated - Whether second order elements will be generated + Dacă elementele celei de-a doua comenzi vor fi generate @@ -473,7 +473,7 @@ A value in the range of 0.2-10. Whether meshes will be arranged preferably using quadrilateral faces - Whether meshes will be arranged preferably using quadrilateral faces + Dacă ochiurile de plasă vor fi aranjate de preferință utilizând fețe cvadrilaterale @@ -483,12 +483,12 @@ A value in the range of 0.2-10. Leave panel open - Leave panel open + Păstrați panoul deschis Gmsh - Gmsh + Zgură @@ -500,15 +500,15 @@ A value in the range of 0.2-10. You have selected a body without tip. Either set the tip of the body or select a different shape, please. - You have selected a body without tip. -Either set the tip of the body or select a different shape, please. + Ai selectat un corp fără sfaturi. +Te rog setează vârful corpului sau selectează o altă formă. You have selected a shape without faces. Select a different shape, please. - You have selected a shape without faces. -Select a different shape, please. + Ați selectat o formă fără fețe. +Selectați o altă formă, vă rog. @@ -554,12 +554,12 @@ Select a different shape, please. Below - Below + Dedesubt Above - Above + Deasupra @@ -580,12 +580,12 @@ Select a different shape, please. Unwrap Mesh - Unwrap Mesh + Desfaceți plasă Find a flat representation of a mesh. - Find a flat representation of a mesh. + Găsește o reprezentare plană a unei ochiuri de plasă. @@ -593,12 +593,12 @@ Select a different shape, please. Unwrap Face - Unwrap Face + Desfaceți Fața Find a flat representation of a face. - Find a flat representation of a face. + Găsiți o reprezentare plană a unei fețe. diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts index 5d7f0aba04..41b44e6b26 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts @@ -67,37 +67,37 @@ Send to OpenSCAD via: - Send to OpenSCAD via: + Odeslat do OpenSCAD přes: The transfer mechanism for getting data to and from OpenSCAD - The transfer mechanism for getting data to and from OpenSCAD + Přenosový mechanismus pro získávání dat do az OpenSCAD Standard temp directory - Standard temp directory + Standardní dočasný adresář User-specified directory - User-specified directory + Uživatelem zadaný adresář stdout pipe (requires OpenSCAD >= 2021.1) - stdout pipe (requires OpenSCAD >= 2021.1) + stdout pipe (vyžaduje OpenSCAD >= 2021.1) Transfer directory - Transfer directory + Adresář převodu The path to the directory for transferring files to and from OpenSCAD - The path to the directory for transferring files to and from OpenSCAD + Cesta k adresáři pro přenos souborů do az OpenSCAD @@ -107,12 +107,12 @@ Maximum fragment size - Maximum fragment size + Maximální velikost fragmentu Convexity - Convexity + Konvexnost @@ -168,33 +168,33 @@ It looks like you may be using a Snap version of OpenSCAD. - It looks like you may be using a Snap version of OpenSCAD. + Vypadá to, že možná používáte Snap verzi OpenSCAD. If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. - If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + Pokud se při spuštění OpenSCAD nepodaří načíst dočasný soubor, změňte mechanismus přenosu pomocí předvoleb OpenSCAD Workbench FreeCAD. It looks like you may be using a sandboxed version of FreeCAD. - It looks like you may be using a sandboxed version of FreeCAD. + Vypadá to, že možná používáte sandboxovou verzi FreeCADu. Unable to explode %s - Unable to explode %s + Nelze rozložit %s Convert Edges to Faces - Convert Edges to Faces + Převést hrany na tváře Please select 3 objects first - Please select 3 objects first + Nejprve prosím vyberte 3 objekty @@ -242,13 +242,13 @@ as Mesh - as Mesh + jako Mesh Add OpenSCAD Element - Add OpenSCAD Element + Přidat prvek OpenSCAD @@ -270,34 +270,34 @@ Perform - Perform + Provést Mesh Boolean - Mesh Boolean + Mesh Boolean Minkowski sum - Minkowski sum + Minkowski sum OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + Soubor OpenSCAD obsahuje 2D i 3D tvary. To tento importér nepodporuje, všechny tvary musí mít stejné rozměry. Error: either all shapes must be 2D or all shapes must be 3D - Error: either all shapes must be 2D or all shapes must be 3D + Chyba: buď všechny tvary musí být 2D, nebo všechny tvary musí být 3D Unsupported Function - Unsupported Function + Nepodporovaná funkce @@ -311,12 +311,12 @@ Explode Group - Explode Group + Rozbít skupinu Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Odstraňte fúzi, aplikujte umístění na děti a vybarvěte náhodně @@ -324,12 +324,12 @@ Color Shapes - Color Shapes + Barva ploch Color Shapes by validity and type - Color Shapes by validity and type + Barva Tvary podle platnosti a typu @@ -337,7 +337,7 @@ Convert Edges To Faces - Convert Edges To Faces + Převést hrany na tváře @@ -345,12 +345,12 @@ Refine Shape Feature - Refine Shape Feature + Funkce Upřesnit tvar Create Refine Shape Feature - Create Refine Shape Feature + Vytvořte funkci Upřesnit tvar @@ -358,12 +358,12 @@ Mirror Mesh Feature... - Mirror Mesh Feature... + Funkce zrcadlení sítě... Create Mirror Mesh Feature - Create Mirror Mesh Feature + Vytvořit funkci zrcadlení sítě @@ -371,12 +371,12 @@ Scale Mesh Feature... - Scale Mesh Feature... + Funkce měřítka... Create Scale Mesh Feature - Create Scale Mesh Feature + Vytvořit funkci měřítka sítě @@ -384,12 +384,12 @@ Resize Mesh Feature... - Resize Mesh Feature... + Změna velikosti síťe... Create Resize Mesh Feature - Create Resize Mesh Feature + Vytvořit funkci Změna velikosti sítě @@ -397,12 +397,12 @@ Increase Tolerance Feature - Increase Tolerance Feature + Zvýšit toleranci prvku Create Feature that allows increasing the tolerance - Create Feature that allows increasing the tolerance + Vytvořte prvek, který umožňuje zvýšit toleranci @@ -410,12 +410,12 @@ Expand Placements - Expand Placements + Rozbalte umístění Expand all placements downwards in the Tree view - Expand all placements downwards in the Tree view + Ve stromovém zobrazení rozbalte všechna umístění směrem dolů @@ -423,12 +423,12 @@ Replace Object - Replace Object + Nahradit objekt Replace an object in the Tree view. Please select old, new, and parent object - Replace an object in the Tree view. Please select old, new, and parent object + Nahraďte objekt ve stromovém zobrazení. Vyberte prosím starý, nový a nadřazený objekt @@ -436,12 +436,12 @@ Remove Objects and their Children - Remove Objects and their Children + Odstranit objekty a jejich potomky Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Odebere vybrané objekty a všechny potomky, na které se neodkazují jiné objekty @@ -449,12 +449,12 @@ Add OpenSCAD Element... - Add OpenSCAD Element... + Přidat prvek OpenSCAD... Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Přidejte prvek OpenSCAD zadáním kódu OpenSCAD a spuštěním binárního souboru OpenSCAD @@ -462,12 +462,12 @@ Mesh Boolean... - Mesh Boolean... + Booleovské operace se sítí... Export objects as meshes and use OpenSCAD to perform a boolean operation - Export objects as meshes and use OpenSCAD to perform a boolean operation + Exportujte objekty jako sítě a použijte OpenSCAD k provedení booleovské operace @@ -480,7 +480,7 @@ Use OpenSCAD to create a hull - Use OpenSCAD to create a hull + Použít OpenSCAD k vytvoření trupu @@ -488,12 +488,12 @@ OpenSCAD Tools - OpenSCAD Tools + OpenSCAD soubory Frequently-used Part WB tools - Frequently-used Part WB tools + Často používané nástroje části WB @@ -501,12 +501,12 @@ Minkowski sum - Minkowski sum + Minkowski sum Use OpenSCAD to create a Minkowski sum - Use OpenSCAD to create a Minkowski sum + Použijte OpenSCAD k vytvoření Minkowského součtu diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts index 0ba6d079f2..c3d651132e 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_id.ts @@ -106,8 +106,13 @@ - maximum fragment size - ukuran maksimum fragmen + Maximum fragment size + Maximum fragment size + + + + Convexity + Convexity @@ -136,11 +141,6 @@ mm mm - - - convexity - sifat busung - Mesh fallback @@ -163,4 +163,350 @@ Pengaturan triangulasi + + OpenSCAD + + + It looks like you may be using a Snap version of OpenSCAD. + It looks like you may be using a Snap version of OpenSCAD. + + + + + If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + + + + It looks like you may be using a sandboxed version of FreeCAD. + It looks like you may be using a sandboxed version of FreeCAD. + + + + Unable to explode %s + Unable to explode %s + + + + Convert Edges to Faces + Convert Edges to Faces + + + + Please select 3 objects first + Please select 3 objects first + + + + + Add + Menambahkan + + + + Clear + Bersih + + + + Load + Muat + + + + Save + Simpan + + + + + Refresh + Menyegarkan + + + + Clear code + Clear code + + + + Open... + Buka... + + + + Save... + Save... + + + + + as Mesh + as Mesh + + + + + Add OpenSCAD Element + Add OpenSCAD Element + + + + Open file + Open file + + + + + OpenSCAD Files + OpenSCAD Files + + + + Save file + Save file + + + + + Perform + Perform + + + + + Mesh Boolean + Mesh Boolean + + + + Minkowski sum + Minkowski sum + + + + OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + + + + Error: either all shapes must be 2D or all shapes must be 3D + Error: either all shapes must be 2D or all shapes must be 3D + + + + + Unsupported Function + Unsupported Function + + + + + Press OK + Tekan OK + + + + OpenSCAD_ExplodeGroup + + + Explode Group + Explode Group + + + + Remove fusion, apply placement to children, and color randomly + Remove fusion, apply placement to children, and color randomly + + + + OpenSCAD_ColorCodeShape + + + Color Shapes + Color Shapes + + + + Color Shapes by validity and type + Color Shapes by validity and type + + + + OpenSCAD_Edgestofaces + + + Convert Edges To Faces + Convert Edges To Faces + + + + OpenSCAD_RefineShapeFeature + + + Refine Shape Feature + Refine Shape Feature + + + + Create Refine Shape Feature + Create Refine Shape Feature + + + + OpenSCAD_MirrorMeshFeature + + + Mirror Mesh Feature... + Mirror Mesh Feature... + + + + Create Mirror Mesh Feature + Create Mirror Mesh Feature + + + + OpenSCAD_ScaleMeshFeature + + + Scale Mesh Feature... + Scale Mesh Feature... + + + + Create Scale Mesh Feature + Create Scale Mesh Feature + + + + OpenSCAD_ResizeMeshFeature + + + Resize Mesh Feature... + Resize Mesh Feature... + + + + Create Resize Mesh Feature + Create Resize Mesh Feature + + + + OpenSCAD_IncreaseToleranceFeature + + + Increase Tolerance Feature + Increase Tolerance Feature + + + + Create Feature that allows increasing the tolerance + Create Feature that allows increasing the tolerance + + + + OpenSCAD_ExpandPlacements + + + Expand Placements + Expand Placements + + + + Expand all placements downwards in the Tree view + Expand all placements downwards in the Tree view + + + + OpenSCAD_ReplaceObject + + + Replace Object + Replace Object + + + + Replace an object in the Tree view. Please select old, new, and parent object + Replace an object in the Tree view. Please select old, new, and parent object + + + + OpenSCAD_RemoveSubtree + + + Remove Objects and their Children + Remove Objects and their Children + + + + Removes the selected objects and all children that are not referenced from other objects + Removes the selected objects and all children that are not referenced from other objects + + + + OpenSCAD_AddOpenSCADElement + + + Add OpenSCAD Element... + Add OpenSCAD Element... + + + + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + + + + OpenSCAD_MeshBoolean + + + Mesh Boolean... + Mesh Boolean... + + + + Export objects as meshes and use OpenSCAD to perform a boolean operation + Export objects as meshes and use OpenSCAD to perform a boolean operation + + + + OpenSCAD_Hull + + + Hull + Lambung kapal + + + + Use OpenSCAD to create a hull + Use OpenSCAD to create a hull + + + + Workbench + + + OpenSCAD Tools + OpenSCAD Tools + + + + Frequently-used Part WB tools + Frequently-used Part WB tools + + + + OpenSCAD_Minkowski + + + Minkowski sum + Minkowski sum + + + + Use OpenSCAD to create a Minkowski sum + Use OpenSCAD to create a Minkowski sum + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index 85b884b0e7..4f0631fb33 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -493,7 +493,7 @@ Frequently-used Part WB tools - Często używane narzędzia środowiska pracy Część + Często używane narzędzia środowiska Część diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts index 59e3ed0a47..2e9f967e16 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts @@ -67,17 +67,17 @@ Send to OpenSCAD via: - Send to OpenSCAD via: + Trimite în OpenSCAD via: The transfer mechanism for getting data to and from OpenSCAD - The transfer mechanism for getting data to and from OpenSCAD + Mecanismul de transfer pentru obținerea datelor către și de la OpenSCAD Standard temp directory - Standard temp directory + Director temp standard @@ -87,17 +87,17 @@ stdout pipe (requires OpenSCAD >= 2021.1) - stdout pipe (requires OpenSCAD >= 2021.1) + țeavă de stdout (necesită OpenSCAD >= 2021.1) Transfer directory - Transfer directory + Directorul pentru transferuri The path to the directory for transferring files to and from OpenSCAD - The path to the directory for transferring files to and from OpenSCAD + Calea către director pentru transferul fişierelor către şi de la OpenSCAD @@ -107,12 +107,12 @@ Maximum fragment size - Maximum fragment size + Mărimea maximă a fragmentului Convexity - Convexity + Convenție @@ -168,33 +168,33 @@ It looks like you may be using a Snap version of OpenSCAD. - It looks like you may be using a Snap version of OpenSCAD. + Se pare că ați putea folosi o versiune Snap a OpenSCAD. If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. - If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + Dacă execuția OpenSCAD nu reușește să încarce fișierul temporar, folosește preferințele OpenSCAD ale Ghidului de la FreeCAD, pentru a schimba mecanismul de transfer. It looks like you may be using a sandboxed version of FreeCAD. - It looks like you may be using a sandboxed version of FreeCAD. + Se pare că ai putea folosi o versiune sandboxed de FreeCAD. Unable to explode %s - Unable to explode %s + Imposibil de explodat %s Convert Edges to Faces - Convert Edges to Faces + Convertește marginile în fețe Please select 3 objects first - Please select 3 objects first + Vă rugăm să selectaţi mai întâi 3 obiecte @@ -226,7 +226,7 @@ Clear code - Clear code + Șterge codul @@ -236,68 +236,68 @@ Save... - Save... + Salvează... as Mesh - as Mesh + ca Mesh Add OpenSCAD Element - Add OpenSCAD Element + Adaugă element OpenSCAD Open file - Open file + Deschide fișier OpenSCAD Files - OpenSCAD Files + Fișiere OpenSCAD Save file - Save file + Salvează fișierul Perform - Perform + Efectuează Mesh Boolean - Mesh Boolean + Mesh Boolean Minkowski sum - Minkowski sum + Minkowski sum OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + Fișierul OpenSCAD conține atât forme 2D, cât și 3D. Acest lucru nu este acceptat în acest importator, toate formele trebuie să aibă aceeași dimensiune. Error: either all shapes must be 2D or all shapes must be 3D - Error: either all shapes must be 2D or all shapes must be 3D + Eroare: fie toate formele trebuie să fie 2D, fie toate formele trebuie să fie 3D Unsupported Function - Unsupported Function + Funcție nesuportată @@ -311,12 +311,12 @@ Explode Group - Explode Group + Explorează grupul Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Eliminați fuziunea, aplicați plasare la copii și culoare aleatoriu @@ -324,12 +324,12 @@ Color Shapes - Color Shapes + Forme de culoare Color Shapes by validity and type - Color Shapes by validity and type + Forme de culoare după valabilitate și tip @@ -337,7 +337,7 @@ Convert Edges To Faces - Convert Edges To Faces + Convertește marginile în fete @@ -345,12 +345,12 @@ Refine Shape Feature - Refine Shape Feature + Rafineaza caracteristica de forma Create Refine Shape Feature - Create Refine Shape Feature + Creați Rafinarea Caracteristicii Formei @@ -358,12 +358,12 @@ Mirror Mesh Feature... - Mirror Mesh Feature... + Funcție oglindă plasă... Create Mirror Mesh Feature - Create Mirror Mesh Feature + Creează caracteristica Oglindă plasă @@ -371,12 +371,12 @@ Scale Mesh Feature... - Scale Mesh Feature... + Scalează funcția Mesh... Create Scale Mesh Feature - Create Scale Mesh Feature + Creaza caracteristica Scale Mesh @@ -384,12 +384,12 @@ Resize Mesh Feature... - Resize Mesh Feature... + Redimensionează funcția Mesh... Create Resize Mesh Feature - Create Resize Mesh Feature + Crează funcția Redimensionare plasă @@ -397,12 +397,12 @@ Increase Tolerance Feature - Increase Tolerance Feature + Crește funcția toleranței Create Feature that allows increasing the tolerance - Create Feature that allows increasing the tolerance + Creează o caracteristică care permite creșterea toleranței @@ -410,12 +410,12 @@ Expand Placements - Expand Placements + Extinde plasamentele Expand all placements downwards in the Tree view - Expand all placements downwards in the Tree view + Extinde toate plasamentele în jos în vizualizarea arborelui @@ -423,12 +423,12 @@ Replace Object - Replace Object + Înlocuiți obiectul Replace an object in the Tree view. Please select old, new, and parent object - Replace an object in the Tree view. Please select old, new, and parent object + Înlocuiește un obiect în vizualizarea arborelor. Vă rugăm să selectați obiectul vechi, nou și părinte @@ -436,12 +436,12 @@ Remove Objects and their Children - Remove Objects and their Children + Elimină obiectele și copiii lor Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Elimină obiectele selectate și toți copiii care nu sunt referiți la alte obiecte @@ -449,12 +449,12 @@ Add OpenSCAD Element... - Add OpenSCAD Element... + Adaugă element OpenSCAD... Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Adăugați un element OpenSCAD prin introducerea codului OpenSCAD și executarea binarului OpenSCAD @@ -462,12 +462,12 @@ Mesh Boolean... - Mesh Boolean... + Mesh Boolean... Export objects as meshes and use OpenSCAD to perform a boolean operation - Export objects as meshes and use OpenSCAD to perform a boolean operation + Exportă obiectele ca ochiuri și folosește OpenSCAD pentru a efectua o operațiune boolean @@ -480,7 +480,7 @@ Use OpenSCAD to create a hull - Use OpenSCAD to create a hull + Folosește OpenSCAD pentru a crea o cocă @@ -488,12 +488,12 @@ OpenSCAD Tools - OpenSCAD Tools + Instrumente OpenSCAD Frequently-used Part WB tools - Frequently-used Part WB tools + Instrumente utilizate frecvent în partea WB @@ -501,12 +501,12 @@ Minkowski sum - Minkowski sum + Minkowski sum Use OpenSCAD to create a Minkowski sum - Use OpenSCAD to create a Minkowski sum + Utilizaţi OpenSCAD pentru a crea o sumă Minkowski diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index b4190f9890..43c99eef30 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -1195,7 +1195,7 @@ Set the color of each individual face of the selected object. - Set the color of each individual face of the selected object. + Nastavte barvu každé jednotlivé plochy vybraného objektu. @@ -1231,7 +1231,7 @@ Clear all dimensions from the screen. - Clear all dimensions from the screen. + Vymažte všechny rozměry z obrazovky. @@ -1251,9 +1251,9 @@ Measure the linear distance between two points; if edges or faces are picked, it will measure between two vertices of them. - Measure the linear distance between two points; -if edges or faces are picked, it will measure -between two vertices of them. + Změřte lineární vzdálenost mezi dvěma body; +pokud jsou vybrány hrany nebo plochy, změří se +mezi jejich dvěma vrcholy. @@ -1272,8 +1272,8 @@ between two vertices of them. Recalculate the dimensions if the measured points have moved. - Recalculate the dimensions -if the measured points have moved. + Přepočítejte rozměry +jestli se měřené body posunuly. @@ -1292,8 +1292,8 @@ if the measured points have moved. Toggle on and off all direct dimensions, including angular. - Toggle on and off all direct dimensions, -including angular. + Zapnout a vypnout všechny přímé dimenze, +včetně úhlových. @@ -1312,8 +1312,8 @@ including angular. Toggle on and off all currently visible dimensions, direct, orthogonal, and angular. - Toggle on and off all currently visible dimensions, -direct, orthogonal, and angular. + Zapnout a vypnout všechny aktuálně viditelné rozměry, +přímé, ortogonální a úhlové. @@ -1333,9 +1333,9 @@ direct, orthogonal, and angular. Toggle on and off all orthogonal dimensions, meaning that a direct dimension will be decomposed into its X, Y, and Z components. - Toggle on and off all orthogonal dimensions, -meaning that a direct dimension will be decomposed -into its X, Y, and Z components. + Zapnout a vypnout všechny ortogonální rozměry, +což znamená, že bude rozložena přímá dimenze +na jeho složky X, Y a Z. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 6d688b9639..3b501d9c3c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -1911,12 +1911,12 @@ X-, Y- und Z-Komponenten zerlegt wird. Create points object from geometry - Create points object from geometry + Punktobjekt aus Geometrie erstellen Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Erstellt ein auswählbares Punkteobjekt aus dem ausgewählten geometrischen Objekt @@ -2303,7 +2303,7 @@ der Projektion. Points from geometry - Points from geometry + Punkte aus Geometrie @@ -5309,7 +5309,7 @@ Individuelle BOP Checks: Checked object - Checked object + Geprüftes Objekt @@ -6125,12 +6125,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Abstand im Parameterraum Enter distance: - Enter distance: + Abstand eingeben: @@ -6584,7 +6584,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Shape type - Shape type + Art der Form @@ -6619,7 +6619,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. CompSolids - CompSolids + Verbundfestkörper @@ -6659,7 +6659,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Curve center - Curve center + Kurvenmittelpunkt @@ -6674,7 +6674,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Is closed - Is closed + Ist geschlossen @@ -6684,12 +6684,12 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Global center of mass - Global center of mass + Globaler Massenschwerpunkt Global placement - Global placement + Globale Positionierung diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts index 4f211a7a55..0bc3fd7b68 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts @@ -1913,12 +1913,12 @@ en sus componentes X, Y y Z. Create points object from geometry - Create points object from geometry + Crea puntos a partir de la geometría Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Crea puntos seleccionables del objeto geométrico seleccionado @@ -2305,7 +2305,7 @@ de proyección. Points from geometry - Points from geometry + Puntos desde geometría @@ -5317,7 +5317,7 @@ Chequeos individuales de Operaciones Booleanas: Checked object - Checked object + Objeto marcado @@ -6134,12 +6134,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Distancia en el espacio del parámetro Enter distance: - Enter distance: + Introducir distancia: @@ -6594,7 +6594,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Shape type - Shape type + Tipo de forma @@ -6629,7 +6629,7 @@ Se creará un 'Filtro Compuesto' para cada forma. CompSolids - CompSolids + CompSolids @@ -6669,7 +6669,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Curve center - Curve center + Curva central @@ -6684,7 +6684,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Is closed - Is closed + Está cerrado @@ -6694,12 +6694,12 @@ Se creará un 'Filtro Compuesto' para cada forma. Global center of mass - Global center of mass + Centro global de masa Global placement - Global placement + Ubicación global diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index c9dda80fe8..14bdcbec86 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -2305,7 +2305,7 @@ de proyección. Points from geometry - Points from geometry + Puntos dada la geometría @@ -5314,7 +5314,7 @@ Chequeos individuales de Operaciones Booleanas: Checked object - Checked object + Objeto marcado @@ -6131,12 +6131,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Distancia en el espacio del parámetro Enter distance: - Enter distance: + Ingresar distancia: @@ -6591,7 +6591,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Shape type - Shape type + Tipo de forma @@ -6626,7 +6626,7 @@ Se creará un 'Filtro Compuesto' para cada forma. CompSolids - CompSolids + CompSolids @@ -6666,7 +6666,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Curve center - Curve center + Curva central @@ -6681,7 +6681,7 @@ Se creará un 'Filtro Compuesto' para cada forma. Is closed - Is closed + Está cerrado @@ -6691,12 +6691,12 @@ Se creará un 'Filtro Compuesto' para cada forma. Global center of mass - Global center of mass + Centro global de masa Global placement - Global placement + Ubicación global diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 40d80dcf28..f0fe9f0b1c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -1912,12 +1912,12 @@ X, Y eta Z osagaietan. Create points object from geometry - Create points object from geometry + Geometriatik objektu-puntuak sortzea Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Aukeratutako objektu geometrikoaren objektu-puntu hautagarrien sortzea @@ -2304,7 +2304,7 @@ zehazten du. Points from geometry - Points from geometry + Geometriatik puntuak @@ -5318,7 +5318,7 @@ Banakako BOP egiaztatzeak: Checked object - Checked object + Objektu markatua @@ -6135,12 +6135,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Espazio-parametroan distantzia Enter distance: - Enter distance: + Sartu distantzia: @@ -6594,7 +6594,7 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + Forma mota @@ -6629,7 +6629,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + Solido konposatuak @@ -6669,7 +6669,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + Kurbaren zentroa @@ -6684,7 +6684,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + Itxita dago @@ -6694,12 +6694,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Masa-zentru globala Global placement - Global placement + Kokapen globala diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 92cb0a9d65..2d96f6a582 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -1912,12 +1912,12 @@ décomposée en ses composantes X, Y et Z. Create points object from geometry - Create points object from geometry + Créer un objet points à partir d'une géométrie Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Créer un objet points sélectionnable à partir de l'objet géométrie sélectionné @@ -2304,7 +2304,7 @@ de la projection. Points from geometry - Points from geometry + Points depuis la géométrie @@ -5325,7 +5325,7 @@ Valeur par défaut : true Checked object - Checked object + Objet coché @@ -6142,12 +6142,12 @@ Voulez-vous continuer ? Distance in parameter space - Distance in parameter space + Distance dans l'espace des paramètres Enter distance: - Enter distance: + Entrer une distance : @@ -6597,7 +6597,7 @@ Cela créera un "filtre composé" pour chaque forme. Shape type - Shape type + Type de forme @@ -6632,7 +6632,7 @@ Cela créera un "filtre composé" pour chaque forme. CompSolids - CompSolids + Composé de solides @@ -6672,7 +6672,7 @@ Cela créera un "filtre composé" pour chaque forme. Curve center - Curve center + Centre de la courbe @@ -6687,7 +6687,7 @@ Cela créera un "filtre composé" pour chaque forme. Is closed - Is closed + Est fermé @@ -6697,12 +6697,12 @@ Cela créera un "filtre composé" pour chaque forme. Global center of mass - Global center of mass + Centre de masse global Global placement - Global placement + Placement global diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 0a63eac6f1..70eb815dd4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -1912,12 +1912,12 @@ X, Y és Z komponenseire. Create points object from geometry - Create points object from geometry + Pont-tárgy létrehozása geometriából Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Választható pont-tárgy létrehozása kijelölt geometriai tárgyból @@ -2304,7 +2304,7 @@ irányát. Points from geometry - Points from geometry + Pontok a geometriából @@ -2931,7 +2931,7 @@ Ha mindkét hossz nulla, akkor az irány magnitúdóértékét kell használni.< The document '%1' doesn't exist. - The document '%1' doesn't exist. + A '%1' dokumentum nem létezik. @@ -4078,7 +4078,7 @@ a fájl olvasása közben (lassabb, de pontosabb). Select a shape for revolution, first. - Select a shape for revolution, first. + Először válasszon ki egy alakzatot a forgatáshoz. @@ -4157,7 +4157,7 @@ a fájl olvasása közben (lassabb, de pontosabb). Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. - Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. + Ha túl kicsi eltérést állít be, akkor a hálózófaktorálás tovább tart, és így lefagy vagy lelassul a grafikus felület. @@ -5317,7 +5317,7 @@ Egyedi BOP ellenőrzések: Checked object - Checked object + Ellenőrzött tárgy @@ -6133,12 +6133,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Távolság a paramétertérben Enter distance: - Enter distance: + Távolság megadása: @@ -6591,7 +6591,7 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Shape type - Shape type + Alakzat típus @@ -6626,7 +6626,7 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. CompSolids - CompSolids + Kompozit szilárd anyag @@ -6666,7 +6666,7 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Curve center - Curve center + Görbe közepe @@ -6681,7 +6681,7 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Is closed - Is closed + Lezárt @@ -6691,12 +6691,12 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Global center of mass - Global center of mass + Globális tömegközéppont Global placement - Global placement + Globális elhelyezés diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index 588a99c79d..6447f6429b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -1261,14 +1261,14 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdBoxSelection - + Part Bagian - - - + + + Box selection Pemilihan kotak @@ -1276,17 +1276,17 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdCheckGeometry - + Part Bagian - + Check Geometry Periksa Geometri - + Analyzes Geometry For Errors Analisis Geometri Untuk Kesalahan @@ -1294,17 +1294,17 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdColorPerFace - + Part Bagian - + Color per face Warna per wajah - + Set the color of each individual face of the selected object. Set the color of each individual face of the selected object. @@ -1312,17 +1312,17 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdMeasureAngular - + Part Bagian - + Measure Angular Ukur Sudut - + Measure the angle between two edges. Measure the angle between two edges. @@ -1330,17 +1330,17 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdMeasureClearAll - + Part Bagian - + Clear All Bersihkan semua - + Clear all dimensions from the screen. Clear all dimensions from the screen. @@ -1348,17 +1348,17 @@ Of course this example is not real (first for all fuel tanks cannot be placed in CmdMeasureLinear - + Part Bagian - + Measure Linear Ukur Linear - + Measure the linear distance between two points; if edges or faces are picked, it will measure between two vertices of them. @@ -1370,17 +1370,17 @@ between two vertices of them. CmdMeasureRefresh - + Part Bagian - + Refresh Menyegarkan - + Recalculate the dimensions if the measured points have moved. Recalculate the dimensions @@ -1390,17 +1390,17 @@ if the measured points have moved. CmdMeasureToggle3d - + Part Bagian - + Toggle 3D Toggle 3D - + Toggle on and off all direct dimensions, including angular. Toggle on and off all direct dimensions, @@ -1410,17 +1410,17 @@ including angular. CmdMeasureToggleAll - + Part Bagian - + Toggle All Toggle All - + Toggle on and off all currently visible dimensions, direct, orthogonal, and angular. Toggle on and off all currently visible dimensions, @@ -1430,17 +1430,17 @@ direct, orthogonal, and angular. CmdMeasureToggleDelta - + Part Bagian - + Toggle Delta Toggle Delta - + Toggle on and off all orthogonal dimensions, meaning that a direct dimension will be decomposed into its X, Y, and Z components. @@ -1616,17 +1616,17 @@ into its X, Y, and Z components. CmdPartCompOffset - + Part Bagian - + Offset: Offset: - + Tools to offset shapes (construct parallel shapes) Alat untuk mengimbangi bentuk (membangun bentuk paralel) @@ -1645,8 +1645,8 @@ into its X, Y, and Z components. - Shape splitting tools. Compsolid creation tools. OCC 6.9.0 or later is required. - Bentuk alat pemecah. Alat pembuatan komplemen. OCC 6.9.0 atau yang lebih baru diperlukan. + Shape splitting and Compsolid creation tools. + Shape splitting and Compsolid creation tools. @@ -1746,17 +1746,17 @@ into its X, Y, and Z components. CmdPartDefeaturing - + Part Bagian - + Defeaturing Defeaturing - + Remove feature from a shape Remove feature from a shape @@ -1764,17 +1764,17 @@ into its X, Y, and Z components. CmdPartElementCopy - + Part Bagian - + Create shape element copy Create shape element copy - + Create a non-parametric copy of the selected shape element Create a non-parametric copy of the selected shape element @@ -1980,17 +1980,17 @@ into its X, Y, and Z components. CmdPartOffset2D - + Part Bagian - + 2D Offset... 2D Offset... - + Utility to offset planar shapes Utility to offset planar shapes @@ -2016,19 +2016,19 @@ into its X, Y, and Z components. CmdPartPointsFromMesh - + Part Bagian - - Create points object from mesh - Create points object from mesh + + Create points object from geometry + Create points object from geometry - - Create selectable points object from selected mesh object - Create selectable points object from selected mesh object + + Create selectable points object from selected geometric object + Create selectable points object from selected geometric object @@ -2052,17 +2052,17 @@ into its X, Y, and Z components. CmdPartProjectionOnSurface - + Part Bagian - + Create projection on surface... Create projection on surface... - + Project edges, wires, or faces of one object onto a face of another object. The camera view determines the direction @@ -2076,17 +2076,17 @@ of projection. CmdPartRefineShape - + Part Bagian - + Refine shape Perbaiki bentuk - + Refine the copy of a shape Perbaiki salinan bentuknya @@ -2130,17 +2130,17 @@ of projection. CmdPartRuledSurface - + Part Bagian - + Create ruled surface Buat permukaan yang diperintah - + Create a ruled surface from either two Edges or two wires Menciptakan permukaan memerintah dari dua sisi atau dua kabel @@ -2166,12 +2166,12 @@ of projection. CmdPartSectionCut - + Persistent section cut Persistent section cut - + Creates a persistent section cut of visible part objects Creates a persistent section cut of visible part objects @@ -2179,17 +2179,17 @@ of projection. CmdPartShapeFromMesh - + Part Bagian - + Create shape from mesh... Membuat bentuk dari mesh... - + Create shape from selected mesh object Membuat bentuk dari objek dipilih mesh @@ -2197,17 +2197,17 @@ of projection. CmdPartSimpleCopy - + Part Bagian - + Create simple copy Buat salinan sederhana - + Create a simple non-parametric copy Buat salinan non-parametrik sederhana @@ -2215,17 +2215,17 @@ of projection. CmdPartSimpleCylinder - + Part Bagian - + Create Cylinder... Buat Cylinder... - + Create a Cylinder Buat Silinder @@ -2271,27 +2271,27 @@ of projection. CmdPartThickness - + Part Bagian - + Thickness... Ketebalan... - + Utility to apply a thickness Utilitas untuk menerapkan ketebalan - + Wrong selection Pilihan salah - + Selected shape is not a solid Bentuk yang dipilih memang tidak padat @@ -2319,17 +2319,17 @@ of projection. CmdPartTransformedCopy - + Part Bagian - + Create transformed copy Create transformed copy - + Create a non-parametric copy with transformed placement Create a non-parametric copy with transformed placement @@ -2393,37 +2393,37 @@ of projection. Make Offset - + Make 2D Offset Make 2D Offset - + Make Thickness Make Thickness - + Create ruled surface Buat permukaan yang diperintah - + Create Part Cylinder Create Part Cylinder - - Points from mesh - Points from mesh + + Points from geometry + Points from geometry - + Refine shape Perbaiki bentuk - + Defeaturing Defeaturing @@ -2433,12 +2433,12 @@ of projection. Convert mesh - + Edit attachment Edit attachment - + Change face colors Change face colors @@ -2448,33 +2448,33 @@ of projection. Loteng - + Edge Tepi - + Wire Kawat - - + + Face Menghadapi - + Shell Kulit - + Solid Padat - + Sweep Menyapu @@ -2715,42 +2715,42 @@ Note: The placement is expressed in local space of object being attached.Tukar pilihan - + Select a shape on the left side, first Pilih bentuk di sisi kiri, pertama - + Select a shape on the right side, first Pilih bentuk di sisi kanan, pertama - + Cannot perform a boolean operation with the same shape Tidak bisa melakukan operasi boolean dengan bentuk yang sama - + No active document available Tidak ada dokumen aktif yang tersedia - + One of the selected objects doesn't exist anymore Salah satu objek yang dipilih tidak ada lagi - + Performing union on non-solids is not possible Melakukan persatuan pada non-padatan tidak mungkin dilakukan - + Performing intersection on non-solids is not possible Pertunjukan persimpangan pada non-padatan tidak mungkin dilakukan - + Performing difference on non-solids is not possible Perbedaan penampilan pada non-padatan tidak mungkin dilakukan @@ -2758,7 +2758,7 @@ Note: The placement is expressed in local space of object being attached. PartGui::DlgChamferEdges - + Chamfer Edges Chamfer Edges @@ -2928,7 +2928,7 @@ the size of the resulting STEP file. - + Select Memilih @@ -3035,35 +3035,35 @@ If both lengths are zero, magnitude of direction is used. Bentuk - + Selecting... Memilih... - + The document '%1' doesn't exist. The document '%1' doesn't exist. - - + + Creating Extrusion failed. %1 Creating Extrusion failed. %1 - + Object not found: %1 Objek tidak ditemukan: % 1 - + No shapes selected for extrusion. Select some, first. Tidak ada bentuk yang dipilih untuk ekstrusi. Pilih beberapa, pertama. - + Extrusion direction link is invalid. %1 @@ -3072,12 +3072,12 @@ If both lengths are zero, magnitude of direction is used. %1 - + Direction mode is to use an edge, but no edge is linked. Mode arah adalah menggunakan tepi, namun tidak ada sisi yang terhubung. - + Can't determine normal vector of shape to be extruded. Please use other mode. (%1) @@ -3086,12 +3086,12 @@ If both lengths are zero, magnitude of direction is used. ( % 1) - + Extrusion direction vector is zero-length. It must be non-zero. Extrusion direction vector is zero-length. It must be non-zero. - + Total extrusion length is zero (length1 == -length2). It must be nonzero. Panjang ekstrusi total adalah nol (length1 == -length2). Itu pasti bukan nol. @@ -3120,7 +3120,7 @@ If both lengths are zero, magnitude of direction is used. - + Fillet Parameter Parameter Fillet @@ -3170,105 +3170,105 @@ If both lengths are zero, magnitude of direction is used. Radius: - + Chamfer Parameter Chamfer Parameter - + Chamfer type Chamfer type - + Length: Length: - + Edges to chamfer Edges to chamfer - + Start length Panjang mulai - + Equal distance Jarak yang sama - + Two distances Dua jarak - + Size Ukuran - + Size2 Size2 - + Fillet type Fillet type - + Edges to fillet Tepi ke fillet - - + + Start radius Mulai radius - + End radius Radius akhir - - + + Edge%1 Edge % 1 - + Length Panjangnya - + Radius Jari-jari - + No shape selected Tidak ada bentuk yang dipilih - + No valid shape is selected. Please select a valid shape in the drop-down box first. Tidak ada bentuk yang valid yang dipilih. Silahkan pilih bentuk yang valid di kotak drop-down dulu. - + No edge selected Tidak ada tepi yang dipilih - + No edge entity is checked to fillet. Please check one or more edge entities first. Tidak ada entitas tepi yang diperiksa ke fillet . Silakan periksa satu atau lebih entitas tepi terlebih dahulu. @@ -3653,79 +3653,79 @@ during file reading (slower but higher details). - + Plane Pesawat - + Box Box - + Cylinder Silinder - + Cone Kerucut - + Sphere Lingkup - + Ellipsoid Ellipsoid - + Torus Torus - + Prism Prisma - + Wedge Baji - + Helix Spiral - + Spiral Spiral - + Circle Lingkaran - + Ellipse Elips @@ -3736,13 +3736,13 @@ during file reading (slower but higher details). - + Line Garis - + Regular polygon Poligon beraturan @@ -3980,24 +3980,25 @@ during file reading (slower but higher details). Titik akhir - + Vertex Vertex - - - + + + + Create %1 Buat % 1 - + No active document Tidak ada dokumen aktif - + &Create &Membuat @@ -4085,12 +4086,12 @@ during file reading (slower but higher details). Projection Object - + Have no active document!!! Have no active document!!! - + Can not create a projection object!!! Can not create a projection object!!! @@ -4150,7 +4151,7 @@ during file reading (slower but higher details). - + Select reference Pilih referensi @@ -4180,19 +4181,19 @@ during file reading (slower but higher details). Buat Solid - + Object not found: %1 Objek tidak ditemukan: % 1 - + Select a shape for revolution, first. Select a shape for revolution, first. - - - + + + Revolution axis link is invalid. %1 @@ -4201,18 +4202,18 @@ during file reading (slower but higher details). % 1 - + Revolution axis direction is zero-length. It must be non-zero. Arah sumbu Revolusi adalah nol-panjang. Itu pasti bukan nol. - + Revolution angle span is zero. It must be non-zero. Rentang sudut revolusi adalah nol. Itu pasti bukan nol. - - + + Creating Revolve failed. %1 @@ -4221,7 +4222,7 @@ during file reading (slower but higher details). % 1 - + Selecting... (line or arc) Memilih... ( garis atau busur) @@ -4259,12 +4260,12 @@ during file reading (slower but higher details). Defleksi sudut maksimum - + Deviation Deviation - + Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. @@ -4689,7 +4690,7 @@ the sketch plane's normal vector will be used PartGui::OffsetWidget - + Input error Input error @@ -4755,62 +4756,89 @@ the sketch plane's normal vector will be used + Color of cut face Color of cut face + Color Warna + If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. If checked, the color and transparency will be taken from the cut objects. -Works only if all objects have the same values. +Works only properly if all objects +have the same values. - + + Auto Mobil - + + Transparency of cut face Transparency of cut face - + + Transparency Transparansi - + + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + Allows to cut objects intersecting each other +for the price that all cut objects +will get the same color + + + + Cut intersecting objects + Cut intersecting objects + + + + Color for all objects + Color for all objects + + + Refreshes the list of visible objects Refreshes the list of visible objects - + Refresh view Refresh view - + When the dialog is closed, only created cuts will be visible When the dialog is closed, only created cuts will be visible - + Keep only cuts visible when closing Keep only cuts visible when closing - + Sliders are disabled for assemblies Sliders are disabled for assemblies @@ -4818,80 +4846,80 @@ only created cuts will be visible PartGui::ShapeBuilderWidget - + Unsupported Unsupported - + Box selection for shells is not supported Box selection for shells is not supported - - - - - - - + + + + + + + Wrong selection Pilihan salah - - + + Select two vertices Pilih dua simpul - - + + Select one or more edges Pilih satu atau beberapa tepi - + Select three or more vertices Pilih tiga atau lebih simpul - + Select two or more faces Pilih dua atau lebih wajah - + Select only one part object Pilih hanya satu bagian objek - + Select two vertices to create an edge Pilih dua simpul untuk membuat tepi - + Select adjacent edges Select adjacent edges - + Select a list of vertices Pilih daftar simpul - + Select a closed set of edges Pilih tertutup set dari tepi - + Select adjacent faces Pilih wajah yang berdekatan - + All shape types can be selected Semua jenis bentuk bisa dipilih @@ -4927,69 +4955,69 @@ only created cuts will be visible Profil yang dipilih - + Too few elements Terlalu sedikit elemen - + At least one edge or wire is required. Setidaknya satu tepi atau kawat diperlukan. - + Invalid selection Pilihan tidak valid - + Select one or more edges from a single object. Select one or more edges from a single object. - + Wrong selection Pilihan salah - + '%1' cannot be used as profile and path. ' % 1 ' tidak dapat digunakan sebagai profil dan jalur. - + Input error Input error - + Done Selesai - + Select one or more connected edges in the 3d view and press 'Done' Pilih satu atau lebih terhubung tepi di 3d tampilan dan tekan 'Selesai' - - + + Sweep path Sapu jalan - - + + The selected sweep path is invalid. Dipilih menyapu jalan tidak valid. - + Vertex/Wire Vertex/Wire - + Sweep Menyapu @@ -5033,7 +5061,7 @@ only created cuts will be visible - + Attachment Offset (in local coordinates): Attachment Offset (in local coordinates): @@ -5114,77 +5142,77 @@ of object being attached. Flip sisi - + OCC error: %1 Kesalahan OCC: % 1 - + unknown error kesalahan yang tidak diketahui - + Attachment mode failed: %1 Modus lampiran gagal: % 1 - + Not attached Tidak terpasang - + Attached with mode %1 Terlampir dengan mode % 1 - + Attachment Offset (inactive - not attached): Attachment Offset (inactive - not attached): - + Face Menghadapi - + Edge Tepi - + Vertex Vertex - + Selecting... Memilih... - + Reference%1 Referensi % 1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: Kombinasi referensi: - + %1 (add %2) % 1 (tambahkan % 2) - + %1 (add more references) % 1 (tambahkan referensi lainnya) @@ -5400,11 +5428,16 @@ Individual BOP Checks: Check geometry Check geometry + + + Checked object + Checked object + PartGui::TaskDlgAttacher - + Datum dialog: Input error Dialog Datum: Kesalahan masukan @@ -5637,7 +5670,7 @@ by dragging a selection rectangle in the 3D view Frenet - + Select one or more profiles and select an edge or wire in the 3D view for the sweep path. Pilih satu atau lebih profil dan pilih tepi atau kawat @@ -5675,24 +5708,24 @@ di 3D pandangan untuk menyapu jalan. PartGui::ThicknessWidget - - - + + + Thickness Thickness - + Select faces of the source object and press 'Done' Pilih wajah dari objek sumber dan tekan 'Selesai' - + Done Selesai - + Input error Input error @@ -5743,27 +5776,29 @@ di 3D pandangan untuk menyapu jalan. QObject - + + + Edit %1 Edit %1 - + Part and Part Design workbench Part and Part Design workbench - - - + + + Part/Part Design Part/Part Design - - + + Import-Export Ekspor Impor @@ -5773,7 +5808,7 @@ di 3D pandangan untuk menyapu jalan. - + Wrong selection Pilihan salah @@ -5824,7 +5859,7 @@ Do you want to continue? Semua data - + You have to select either two edges or two wires. Anda harus memilih dua sisi atau dua kabel. @@ -5835,20 +5870,20 @@ Do you want to continue? Tidak ada referensi yang dipilih - + Face Menghadapi - + Edge Tepi - + Vertex Vertex @@ -6166,7 +6201,7 @@ Do you want to continue? Clear all dimensions - + Set colors... Tetapkan warna... @@ -6205,6 +6240,21 @@ Do you want to continue? Attachment editor Attachment editor + + + Create tube + Create tube + + + + Distance in parameter space + Distance in parameter space + + + + Enter distance: + Enter distance: + Workbench @@ -6269,4 +6319,506 @@ Do you want to continue? Ukuran + + Part_Tube + + + Create tube + Create tube + + + + Creates a tube + Creates a tube + + + + Part_JoinFeatures + + + Computing the result failed with an error: + Computing the result failed with an error: + + + + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + + + Bad selection + Bad selection + + + + Continue + Lanjutkan + + + + Select at least two objects, or one or more compounds + Select at least two objects, or one or more compounds + + + + Select base object, then the object to embed, and then invoke this tool. + Select base object, then the object to embed, and then invoke this tool. + + + + Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. + Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. + + + + Part_JoinConnect + + + Connect objects + Connect objects + + + + Fuses objects, taking care to preserve voids. + Fuses objects, taking care to preserve voids. + + + + Part_JoinEmbed + + + Embed object + Embed object + + + + Fuses one object into another, taking care to preserve voids. + Fuses one object into another, taking care to preserve voids. + + + + Part_JoinCutout + + + Cutout for object + Cutout for object + + + + Makes a cutout in one object to fit another object. + Makes a cutout in one object to fit another object. + + + + Part_SplitFeatures + + + + + Computing the result failed with an error: + Computing the result failed with an error: + + + + + + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + + + + + + Bad selection + Bad selection + + + + + + + Continue + Lanjutkan + + + + Boolean fragments + Boolean fragments + + + + Create a 'Boolean Fragments' object from two or more selected objects, +or from the shapes inside a compound. +This is a boolean union which is then sliced at the intersections +of the original shapes. +A 'Compound Filter' can be used to extract the individual slices. + Create a 'Boolean Fragments' object from two or more selected objects, +or from the shapes inside a compound. +This is a boolean union which is then sliced at the intersections +of the original shapes. +A 'Compound Filter' can be used to extract the individual slices. + + + + + Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + + + + Slice to compound + Slice to compound + + + + Slice a selected object by using other objects as cutting tools. +The resulting pieces will be stored in a compound. +A 'Compound Filter' can be used to extract the individual slices. + Slice a selected object by using other objects as cutting tools. +The resulting pieces will be stored in a compound. +A 'Compound Filter' can be used to extract the individual slices. + + + + + Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. + Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. + + + + Slice apart + Slice apart + + + + Slice a selected object by other objects, and split it apart. +It will create a 'Compound Filter' for each slice. + Slice a selected object by other objects, and split it apart. +It will create a 'Compound Filter' for each slice. + + + + Boolean XOR + Boolean XOR + + + + Perform an 'exclusive OR' boolean operation with two or more selected objects, +or with the shapes inside a compound. +This means the overlapping volumes of the shapes will be removed. +A 'Compound Filter' can be used to extract the remaining pieces. + Perform an 'exclusive OR' boolean operation with two or more selected objects, +or with the shapes inside a compound. +This means the overlapping volumes of the shapes will be removed. +A 'Compound Filter' can be used to extract the remaining pieces. + + + + Part_CompoundFilter + + + Compound Filter + Compound Filter + + + + Filter out objects from a selected compound by characteristics like volume, +area, or length, or by choosing specific items. +If a second object is selected, it will be used as reference, for example, +for collision or distance filtering. + Filter out objects from a selected compound by characteristics like volume, +area, or length, or by choosing specific items. +If a second object is selected, it will be used as reference, for example, +for collision or distance filtering. + + + + First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + + + + + Bad selection + Bad selection + + + + Computing the result failed with an error: + Computing the result failed with an error: + + + + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + Part_ExplodeCompound + + + Explode compound + Explode compound + + + + Split up a compound of shapes into separate objects. +It will create a 'Compound Filter' for each shape. + Split up a compound of shapes into separate objects. +It will create a 'Compound Filter' for each shape. + + + + First select a shape that is a compound. + First select a shape that is a compound. + + + + Bad selection + Bad selection + + + + AttachmentEditor + + + No object named {} + No object named {} + + + + Failed to parse link (more than one colon encountered) + Failed to parse link (more than one colon encountered) + + + + Object {} is neither movable nor attachable, can't edit attachment + Object {} is neither movable nor attachable, can't edit attachment + + + + {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + + + + + Attachment + Attachment + + + + Continue + Lanjutkan + + + + + Edit attachment of {} + Edit attachment of {} + + + + Ignored. Can't attach object to itself! + Ignored. Can't attach object to itself! + + + + {} depends on object being attached, can't use it for attachment + {} depends on object being attached, can't use it for attachment + + + + {} (add {}) + {} (add {}) + + + + {} (add more references) + {} (add more references) + + + + Reference combinations: + Kombinasi referensi: + + + + Reference{} + Reference{} + + + + Selecting... + Memilih... + + + + Failed to resolve links. {} + Failed to resolve links. {} + + + + Not attached + Tidak terpasang + + + + Attached with mode {} + Attached with mode {} + + + + Error: {} + Error: {} + + + + Attachment Offset (in local coordinates): + Attachment Offset (in local coordinates): + + + + Attachment Offset (inactive - not attached): + Attachment Offset (inactive - not attached): + + + + Part_EditAttachment + + + Attachment... + Attachment... + + + + Edit attachment of selected object. + Edit attachment of selected object. + + + + TaskCheckGeometryResults + + + Shape type + Shape type + + + + Vertices + Vertices + + + + Edges + Edges + + + + Wires + Wires + + + + Faces + Wajah + + + + Shells + Kerang + + + + Solids + Padat + + + + CompSolids + CompSolids + + + + Compounds + Senyawa + + + + Shapes + Bentuk + + + + Area + Daerah + + + + Volume + Volume + + + + Mass + Massa + + + + Length + Panjangnya + + + + Radius + Jari-jari + + + + Curve center + Curve center + + + + Continuity + Lanjutkan + + + + Center of mass + Pusat massa + + + + Is closed + Is closed + + + + Orientation + Orientasi + + + + Global center of mass + Global center of mass + + + + Global placement + Global placement + + + + Placement + Penempatan + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts index 20ab7e04e3..bf5cae4e92 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts @@ -1912,12 +1912,12 @@ into its X, Y, and Z components. Create points object from geometry - Create points object from geometry + წერტილოვანი ობიექტის გეომეტრიიდან შექმნა Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + მონიშნული გეომეტრიის ობიექტიდან მონიშვნადი წერტილების ობიექტის შექმნა @@ -2303,7 +2303,7 @@ of projection. Points from geometry - Points from geometry + წერტილები გეომეტრიიდან @@ -5313,7 +5313,7 @@ Individual BOP Checks: Checked object - Checked object + ჩართული ობიექტი @@ -6131,12 +6131,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + დაშორება პარამეტრის სივრცეში Enter distance: - Enter distance: + შეიყვანეთ მანძილი: @@ -6591,7 +6591,7 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + მოხაზულობის ტიპი @@ -6626,7 +6626,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + CompSolids @@ -6666,7 +6666,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + მრუდის ცენტრი @@ -6681,7 +6681,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + დახურულია @@ -6691,12 +6691,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + გლობალური მასის ცენტრი Global placement - Global placement + გლობალური მდებარეობა diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 4a3dea5833..d090b8d26c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -5321,7 +5321,7 @@ Individual BOP Checks: Checked object - Checked object + Gecontroleerd object @@ -6144,7 +6144,7 @@ Wilt u doorgaan? Enter distance: - Enter distance: + Voer afstand in: @@ -6689,7 +6689,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + Is gesloten @@ -6699,12 +6699,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Globaal centrum van massa Global placement - Global placement + Globale plaatsing diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 484a8e4d67..3c140bce21 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -1912,12 +1912,12 @@ na jego składowe X, Y i Z. Create points object from geometry - Create points object from geometry + Utwórz obiekt punktów z siatki Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Tworzenie obiektu punktów wybieralnych z zaznaczonego obiektu geometrycznego @@ -2303,7 +2303,7 @@ Ujęcie widoku określa kierunek rzutowania. Points from geometry - Points from geometry + Punkty z geometrii @@ -5319,7 +5319,7 @@ Pojedyncze kontrole BOP: Checked object - Checked object + Zaznaczony obiekt @@ -5681,7 +5681,8 @@ in the 3D view for the sweep path. Part/Part Design - Część / Projekt Części + Część / +Projekt Części @@ -6135,12 +6136,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Odległość w przestrzeni parametrycznej Enter distance: - Enter distance: + Wprowadź odległość: @@ -6595,7 +6596,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Shape type - Shape type + Typ kształtu @@ -6630,7 +6631,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. CompSolids - CompSolids + Bryła zespolona @@ -6670,7 +6671,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Curve center - Curve center + Środek łuku @@ -6685,7 +6686,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Is closed - Is closed + Jest zamknięty @@ -6695,12 +6696,12 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Global center of mass - Global center of mass + Środek ciężkości Global placement - Global placement + Umiejscowienie diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index f57faabd63..c5d1287df9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -558,7 +558,7 @@ Object's YZ AttachmentPlane mode caption - Object's YZ + Obiectului YZ @@ -731,7 +731,7 @@ Object's X Y Z Attachment3D mode caption - Object's X Y Z + Obiectului X Y Z @@ -743,7 +743,7 @@ Object's X Z Y Attachment3D mode caption - Object's X Z Y + Obiectului X Z-Y @@ -755,7 +755,7 @@ Object's Y Z X Attachment3D mode caption - Object's Y Z X + Obiectului Y Z X @@ -1195,7 +1195,7 @@ Set the color of each individual face of the selected object. - Set the color of each individual face of the selected object. + Setați culoarea fiecărei fețe individuale a obiectului selectat. @@ -1213,7 +1213,7 @@ Measure the angle between two edges. - Measure the angle between two edges. + Măsuraţi unghiul dintre două margini. @@ -1231,7 +1231,7 @@ Clear all dimensions from the screen. - Clear all dimensions from the screen. + Ştergeţi toate dimensiunile de pe ecran. @@ -1251,9 +1251,9 @@ Measure the linear distance between two points; if edges or faces are picked, it will measure between two vertices of them. - Measure the linear distance between two points; -if edges or faces are picked, it will measure -between two vertices of them. + Măsurați distanța liniară dintre două puncte; +dacă marginile sau fețele sunt alese, va măsura +între două vârfuri ale lor. @@ -1272,8 +1272,8 @@ between two vertices of them. Recalculate the dimensions if the measured points have moved. - Recalculate the dimensions -if the measured points have moved. + Recalculează dimensiunile +în cazul în care punctele măsurate s-au mutat. @@ -1286,14 +1286,14 @@ if the measured points have moved. Toggle 3D - Toggle 3D + Comutați 3D Toggle on and off all direct dimensions, including angular. - Toggle on and off all direct dimensions, -including angular. + Comută pe și dezactivează toate dimensiunile directe, +inclusiv angular. @@ -1312,8 +1312,8 @@ including angular. Toggle on and off all currently visible dimensions, direct, orthogonal, and angular. - Toggle on and off all currently visible dimensions, -direct, orthogonal, and angular. + Comută pe și dezactivează toate dimensiunile vizibile, +directe, ortogonale și angulare. @@ -1333,9 +1333,9 @@ direct, orthogonal, and angular. Toggle on and off all orthogonal dimensions, meaning that a direct dimension will be decomposed into its X, Y, and Z components. - Toggle on and off all orthogonal dimensions, -meaning that a direct dimension will be decomposed -into its X, Y, and Z components. + Activează/dezactivează toate dimensiunile ortogonale, +însemnând că o dimensiune directă va fi descompusă +în componentele sale X, Y și Z. @@ -1476,7 +1476,7 @@ into its X, Y, and Z components. Compound tools - Compound tools + Unelte compuse @@ -1535,7 +1535,7 @@ into its X, Y, and Z components. Shape splitting and Compsolid creation tools. - Shape splitting and Compsolid creation tools. + Forma divizată și instrumente Compsolid. @@ -1660,12 +1660,12 @@ into its X, Y, and Z components. Create shape element copy - Create shape element copy + Crează copie element de formă Create a non-parametric copy of the selected shape element - Create a non-parametric copy of the selected shape element + Creați o copie non-parametrică a elementului de formă selectat @@ -1913,12 +1913,12 @@ Inchideti utilizarea 3D Create points object from geometry - Create points object from geometry + Crează obiectul de puncte din geometrie Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Creaţi puncte selectabile din obiectul geometric selectat @@ -1949,7 +1949,7 @@ Inchideti utilizarea 3D Create projection on surface... - Create projection on surface... + Creați proiecția pe suprafață... @@ -1957,10 +1957,10 @@ Inchideti utilizarea 3D onto a face of another object. The camera view determines the direction of projection. - Project edges, wires, or faces of one object -onto a face of another object. -The camera view determines the direction -of projection. + Muchiile proiectului, firele sau fețele unui obiect +pe o față a altui obiect. +Vizualizarea camerei determină direcția +de proiecție. @@ -2058,12 +2058,12 @@ of projection. Persistent section cut - Persistent section cut + Secţiune tăietură persistentă Creates a persistent section cut of visible part objects - Creates a persistent section cut of visible part objects + Creează o tăietură de secţiune persistentă a obiectelor din partea vizibilă @@ -2216,12 +2216,12 @@ of projection. Create transformed copy - Create transformed copy + Crează copie transformată Create a non-parametric copy with transformed placement - Create a non-parametric copy with transformed placement + Crează o copie non-parametrică cu plasament transformat @@ -2230,12 +2230,12 @@ of projection. Part Box Create - Part Box Create + Crează caseta de piese Part Cut - Part Cut + Taie partea @@ -2245,7 +2245,7 @@ of projection. Fusion - Fusion + Fuziune @@ -2260,12 +2260,12 @@ of projection. Import Part - Import Part + Importă capitol Part Import Curve Net - Part Import Curve Net + Importă Part Curve Net @@ -2275,22 +2275,22 @@ of projection. Make face - Make face + Fașa planului Make Offset - Make Offset + Realizați Offset Make 2D Offset - Make 2D Offset + Realizați Offset 2D Make Thickness - Make Thickness + Faceți grosime @@ -2300,12 +2300,12 @@ of projection. Create Part Cylinder - Create Part Cylinder + Creează un cilindru parte Points from geometry - Points from geometry + Puncte din geometrie @@ -2320,17 +2320,17 @@ of projection. Convert mesh - Convert mesh + Convertește plasa Edit attachment - Edit attachment + Editare atașament Change face colors - Change face colors + Schimbă culorile fețelor @@ -2371,7 +2371,7 @@ of projection. Edit Mirror - Edit Mirror + Editare oglindă @@ -2419,60 +2419,60 @@ of projection. In x-direction: - In x-direction: + În direcția x: Note: The placement is expressed in local space of object being attached. - Note: The placement is expressed in local space of object being attached. + Notă: Plasamentul este exprimat în spațiul local al obiectului care este atașat. In y-direction: - In y-direction: + În orientarea-y: In z-direction: - In z-direction: + În „z-direcție”: Around x-axis: - Around x-axis: + În jurul axei x: Rotation around the x-axis Note: The placement is expressed in local space of object being attached. - Rotation around the x-axis -Note: The placement is expressed in local space of object being attached. + Rotaţie în jurul axei x +Notă: Plasamentul este exprimat în spaţiul local al obiectului ataşat. Around y-axis: - Around y-axis: + În jurul axei y: Rotation around the y-axis Note: The placement is expressed in local space of object being attached. - Rotation around the y-axis -Note: The placement is expressed in local space of object being attached. + Rotaţie în jurul axei y +Notă: Plasamentul este exprimat în spaţiul local al obiectului care este ataşat. Around z-axis: - Around z-axis: + În jurul axei z: Rotation around the z-axis Note: The placement is expressed in local space of object being attached. - Rotation around the z-axis -Note: The placement is expressed in local space of object being attached. + Rotaţie în jurul axei z +Notă: Plasamentul este exprimat în spaţiul local al obiectului ataşat. @@ -2663,7 +2663,7 @@ Note: The placement is expressed in local space of object being attached. If not empty, field contents will be used in the STEP file header. - If not empty, field contents will be used in the STEP file header. + Dacă nu este gol, conținutul câmpului va fi folosit în antetul fișierului STEP. @@ -2726,12 +2726,12 @@ Note: The placement is expressed in local space of object being attached. Uncheck this to skip invisible object when exporting, which is useful for CADs that do not support invisibility STEP styling. - Uncheck this to skip invisible object when exporting, which is useful for CADs that do not support invisibility STEP styling. + Debifați acest lucru pentru a sări peste obiectul invizibil la exportare, care este util pentru CAD care nu suportă stilizarea STEP invizibilă. Export invisible objects - Export invisible objects + Exportă obiecte invizibile @@ -2739,20 +2739,20 @@ Note: The placement is expressed in local space of object being attached. - Check this option to keep the placement information when exporting -a single object. Please note that when import back the STEP file, the -placement will be encoded into the shape geometry, instead of keeping -it inside the Placement property. + Bifați această opțiune pentru a păstra informațiile de plasare la exportul +unui singur obiect. Vă rugăm să reţineţi că atunci când importul înapoi fişierul STEP, plasamentul +va fi codificat în geometria formei, în loc să o păstrezi pe +în proprietatea plasament. Export single object placement - Export single object placement + Exportă amplasarea obiectului unic Use legacy export function - Use legacy export function + Folosește funcția de export moștenită @@ -2764,9 +2764,9 @@ it inside the Placement property. This parameter indicates whether parametric curves (curves in parametric space of surface) should be written into the STEP file. This parameter can be set to off in order to minimize the size of the resulting STEP file. - This parameter indicates whether parametric curves (curves in parametric space of surface) -should be written into the STEP file. This parameter can be set to off in order to minimize -the size of the resulting STEP file. + Acest parametru indică dacă curbele parametrice (curbe în spațiul parametric de suprafață) +ar trebui să fie scrise în fișierul STEP. Acest parametru poate fi setat la off pentru a minimiza +dimensiunea fişierului STEP rezultat. @@ -2861,8 +2861,8 @@ the size of the resulting STEP file. Length to extrude along direction (can be negative). If both lengths are zero, magnitude of direction is used. - Length to extrude along direction (can be negative). -If both lengths are zero, magnitude of direction is used. + Lungimea de extrudare de-a lungul direcției (poate fi negativă). +Dacă ambele lungimi sunt zero, magnitudinea direcției este folosită. @@ -2872,7 +2872,7 @@ If both lengths are zero, magnitude of direction is used. Length to extrude against the direction (can be negative). - Length to extrude against the direction (can be negative). + Lungimea de extrudare împotriva direcției (poate fi negativă). @@ -2887,22 +2887,22 @@ If both lengths are zero, magnitude of direction is used. Taper angle along - Taper angle along + Unghiul de taper de-a lungul Taper (draft) angle along extrusion direction - Taper (draft) angle along extrusion direction + Unghiul de căptușeală (ciornă) de-a lungul direcției de extrudare Taper angle against - Taper angle against + Unghiul taper împotriva Taper (draft) angle against extrusion direction - Taper (draft) angle against extrusion direction + Unghiul de căptușeală (ciornă) de-a lungul direcției de extrudare @@ -2917,7 +2917,7 @@ If both lengths are zero, magnitude of direction is used. Select shape(s) that should be extruded - Select shape(s) that should be extruded + Selectați forma (formele) care ar trebui extrudate @@ -2939,7 +2939,7 @@ If both lengths are zero, magnitude of direction is used. Creating Extrusion failed. %1 - Creating Extrusion failed. + Crearea Extrusiunii a eșuat. %1 @@ -2974,7 +2974,7 @@ If both lengths are zero, magnitude of direction is used. Extrusion direction vector is zero-length. It must be non-zero. - Extrusion direction vector is zero-length. It must be non-zero. + vectorul de direcţie de extrazere este lungimea zero. Trebuie să fie non-zero. @@ -3058,12 +3058,12 @@ If both lengths are zero, magnitude of direction is used. Chamfer Parameter - Chamfer Parameter + Parametru Camfer Chamfer type - Chamfer type + Tip camp @@ -3083,12 +3083,12 @@ If both lengths are zero, magnitude of direction is used. Equal distance - Equal distance + Distanță egală Two distances - Two distances + Două distanţe @@ -3098,12 +3098,12 @@ If both lengths are zero, magnitude of direction is used. Size2 - Size2 + Dimensiune2 Fillet type - Fillet type + Tipul de umplere @@ -3202,7 +3202,7 @@ Selectati mai intai una sau mai multe margini. Solids and shells will be exported as trimmed surface - Solids and shells will be exported as trimmed surface + Solide și proiectile vor fi exportate ca suprafață decupată @@ -3212,7 +3212,7 @@ Selectati mai intai una sau mai multe margini. Solids will be exported as manifold solid B-Rep object, shells as shell - Solids will be exported as manifold solid B-Rep object, shells as shell + Solidurile vor fi exportate sub formă de obiecte solide B-Rep, proiectile ca înveliş @@ -3227,7 +3227,7 @@ Selectati mai intai una sau mai multe margini. Blank entities will not be imported - Blank entities will not be imported + Entităţile goale nu vor fi importate @@ -3237,7 +3237,7 @@ Selectati mai intai una sau mai multe margini. If not empty, field contents will be used in the IGES file header - If not empty, field contents will be used in the IGES file header + Dacă nu este gol, conținutul câmpului va fi utilizat în antetul fișierului IGES @@ -3284,8 +3284,8 @@ Selectati mai intai una sau mai multe margini. If checked, no Compound merge will be done during file reading (slower but higher details). - If checked, no Compound merge will be done -during file reading (slower but higher details). + Dacă este bifat, nici o îmbinare compusă nu va fi făcută +în timpul citirii fișierului (mai lent, dar detalii mai mari). @@ -3295,58 +3295,58 @@ during file reading (slower but higher details). Select this to use App::LinkGroup as group container, or else use App::Part. - Select this to use App::LinkGroup as group container, or else use App::Part. + Selectați acest lucru pentru a utiliza App:LinkGroup ca container de grup sau folosiți Aplicație::Part. Use LinkGroup - Use LinkGroup + Utilizează LinkGroup Select this to not import any invisible objects. - Select this to not import any invisible objects. + Selectați acest lucru pentru a nu importa niciun obiect invizibil. Import invisible objects - Import invisible objects + Importă obiecte invizibile Reduce number of objects using Link array - Reduce number of objects using Link array + Reduce numărul de obiecte folosind Link-ul array Reduce number of objects - Reduce number of objects + Reduce numărul de obiecte Expand compound shape with multiple solids - Expand compound shape with multiple solids + Extinde forma compusă cu mai multe solide Expand compound shape - Expand compound shape + Extinde forma compusă Show progress bar when importing - Show progress bar when importing + Arată bara de progres la import Do not use instance name. Useful for some legacy STEP file with non-meaningful auto generated instance names. - Do not use instance name. Useful for some legacy STEP file with non-meaningful auto generated instance names. + Nu utiliza numele instanței. Util pentru un fișier STEP moștenit cu nume de instanțe generate automat nerelevant. Ignore instance names - Ignore instance names + Ignoră numele instanței @@ -3361,22 +3361,22 @@ during file reading (slower but higher details). Assembly per document - Assembly per document + Adunare per document Assembly per document in sub-directory - Assembly per document in sub-directory + Adunare per document în sub-director Object per document - Object per document + Obiect pe document Object per document in sub-directory - Object per document in sub-directory + Obiect per document în sub-director @@ -3673,30 +3673,30 @@ during file reading (slower but higher details). Angle in first direction: - Angle in first direction: + Unghiul în prima direcţie: Angle in first direction - Angle in first direction + Unghiul în prima direcţie Angle in second direction: - Angle in second direction: + Unghiul în a doua direcţie: Angle in second direction - Angle in second direction + Unghiul în a doua direcţie Rotation angle: - Rotation angle: + Unghiul de rotație: @@ -3896,12 +3896,12 @@ during file reading (slower but higher details). Projection on surface - Projection on surface + Estimare la suprafaţă Select projection surface - Select projection surface + Selectaţi suprafaţa de proiecţie @@ -3911,12 +3911,12 @@ during file reading (slower but higher details). Add wire - Add wire + Adăugare fir Add edge - Add edge + Adaugă margine @@ -3926,22 +3926,22 @@ during file reading (slower but higher details). Show faces - Show faces + Arată fețele Show Edges - Show Edges + Arată marginile Extrude height - Extrude height + Înălțime extrasă Solid depth - Solid depth + Adâncime solidă @@ -3951,7 +3951,7 @@ during file reading (slower but higher details). Get current camera direction - Get current camera direction + Obțineți direcția curentă a camerei @@ -3971,17 +3971,17 @@ during file reading (slower but higher details). Projection Object - Projection Object + Obiect de proiecție Have no active document!!! - Have no active document!!! + Nu ai niciun document activ!!! Can not create a projection object!!! - Can not create a projection object!!! + Nu se poate crea un obiect de proiecție!!! @@ -4133,7 +4133,7 @@ during file reading (slower but higher details). <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Definește deviația maximă a ochiurilor fără margini la suprafață. Cu cât valoarea este mai mică cu atât viteza de randare este mai lentă, ceea ce duce la creșterea detaliilor/rezoluției</span></p></body></html> @@ -4204,22 +4204,22 @@ during file reading (slower but higher details). Measurement settings - Measurement settings + Setări de măsurare 3D color - 3D color + Culoare 3D Delta color - Delta color + Culoare Delta Angular color - Angular color + Culoare unghiulară @@ -4239,7 +4239,7 @@ during file reading (slower but higher details). defaultFont - defaultFont + defaultFont @@ -4249,7 +4249,7 @@ during file reading (slower but higher details). Refresh existing measurements - Refresh existing measurements + Actualizează măsurătorile existente @@ -4257,12 +4257,12 @@ during file reading (slower but higher details). Shape appearance - Shape appearance + Aspectul formei Default Shape view properties - Default Shape view properties + Proprietăți Vedere Formă Implicită @@ -4277,22 +4277,22 @@ during file reading (slower but higher details). Use random color instead - Use random color instead + Folosește în schimb culoare aleatorie Random - Random + Aleator Shape transparency - Shape transparency + Transparența formularelor The default transparency for new shapes - The default transparency for new shapes + Transparența implicită pentru forme noi @@ -4323,22 +4323,22 @@ during file reading (slower but higher details). Vertex color - Vertex color + Culoarea vârfului The default color for new vertices - The default color for new vertices + Culoarea implicită pentru nodurile noi Vertex size - Vertex size + Mărimea vârfului The default size for new vertices - The default size for new vertices + Dimensiunea implicită pentru nodurile noi @@ -4353,12 +4353,12 @@ during file reading (slower but higher details). Bounding box font size - Bounding box font size + Mărimea fontului casetei de imobilizare The font size of bounding boxes in the 3D view - The font size of bounding boxes in the 3D view + Dimensiunea fontului în casetele de încadrare în vizualizarea 3D @@ -4366,10 +4366,10 @@ during file reading (slower but higher details). If not checked, it depends on the option "Backlight color" (preferences section Display -> 3D View); either the backlight color will be used or black. - Bottom side of surface will be rendered the same way than top. -If not checked, it depends on the option "Backlight color" -(preferences section Display -> 3D View); either the backlight color -will be used or black. + Partea de jos a suprafeţei va fi randată în acelaşi mod ca partea de sus. +Dacă nu este bifat, depinde de opțiunea "Culoare iluminare în fundal" +(secțiunea de preferințe Display -> 3D View); fie culoarea iluminării de fundal +va fi folosită sau neagră. @@ -4379,7 +4379,7 @@ will be used or black. Default Annotation color - Default Annotation color + Culoare de adnotare implicită @@ -4389,7 +4389,7 @@ will be used or black. Text color for document annotations - Text color for document annotations + Culoare text pentru adnotările documentului @@ -4428,13 +4428,13 @@ will be used or black. Use custom vector for pad direction otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction otherwise -the sketch plane's normal vector will be used + Utilizaţi un vector personalizat pentru direcţia tastaturii altfel +vectorul normal al planului va fi folosit Rotation axis - Rotation axis + Rotire axă @@ -4444,7 +4444,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + componenta x a vectorului de direcție @@ -4454,7 +4454,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + componentă y a vectorului de direcție @@ -4464,7 +4464,7 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + componenta z a vectorului de direcție @@ -4604,12 +4604,12 @@ the sketch plane's normal vector will be used Permanent Section Cutting - Permanent Section Cutting + Tăierea în secţiunea permanentă Cutting X - Cutting X + Tăiere X @@ -4628,23 +4628,23 @@ the sketch plane's normal vector will be used Cutting Y - Cutting Y + Tăierea Y Cutting Z - Cutting Z + Tăiere Z Cut face - Cut face + Taie fața Color of cut face - Color of cut face + Culoarea feței tăiate @@ -4659,10 +4659,10 @@ the sketch plane's normal vector will be used will be taken from the cut objects. Works only properly if all objects have the same values. - If checked, the color and transparency -will be taken from the cut objects. -Works only properly if all objects -have the same values. + Dacă este bifat, culoarea și transparența +vor fi luate din obiectele tăiate. +Funcționează corect numai dacă toate obiectele +au aceleași valori. @@ -4674,7 +4674,7 @@ have the same values. Transparency of cut face - Transparency of cut face + Transparenţa chipurilor tăiate @@ -4687,46 +4687,46 @@ have the same values. Allows to cut objects intersecting each other for the price that all cut objects will get the same color - Allows to cut objects intersecting each other -for the price that all cut objects -will get the same color + Permite tăierea obiectelor care se intersectează între ele +pentru prețul la care toate obiectele tăiate +vor primi aceeași culoare Cut intersecting objects - Cut intersecting objects + Tăiaţi obiectele intersectate Color for all objects - Color for all objects + Culoare pentru toate obiectele Refreshes the list of visible objects - Refreshes the list of visible objects + Reîmprospătează lista de obiecte vizibile Refresh view - Refresh view + Reîmprospătare vizualizare When the dialog is closed, only created cuts will be visible - When the dialog is closed, -only created cuts will be visible + Când dialogul este închis, +doar comenzile create vor fi vizibile Keep only cuts visible when closing - Keep only cuts visible when closing + Păstraţi comenzile vizibile doar la închidere Sliders are disabled for assemblies - Sliders are disabled for assemblies + Sliderele sunt dezactivate pentru asamblări @@ -4734,12 +4734,12 @@ only created cuts will be visible Unsupported - Unsupported + Neacceptat Box selection for shells is not supported - Box selection for shells is not supported + Selectarea casetei pentru proiectile nu este suportată @@ -4815,12 +4815,12 @@ only created cuts will be visible Shape from mesh - Shape from mesh + Forma din plasă Sew shape - Sew shape + Forma de cos @@ -4858,7 +4858,7 @@ only created cuts will be visible Select one or more edges from a single object. - Select one or more edges from a single object. + Selectați una sau mai multe margini de la un singur obiect. @@ -4954,7 +4954,7 @@ only created cuts will be visible In x-direction: - In x-direction: + În direcția x: @@ -4962,65 +4962,65 @@ only created cuts will be visible Note: The placement is expressed in local coordinate system of object being attached. - Note: The placement is expressed in local coordinate system -of object being attached. + Notă: Plasamentul este exprimat în sistemul local de coordonate +al obiectului care este atașat. In y-direction: - In y-direction: + În orientarea-y: In z-direction: - In z-direction: + În „z-direcție”: Around x-axis: - Around x-axis: + În jurul axei x: Rotation around the x-axis Note: The placement is expressed in local coordinate system of object being attached. - Rotation around the x-axis -Note: The placement is expressed in local coordinate system -of object being attached. + Rotaţie în jurul axei x +Notă: Plasamentul este exprimat în sistemul local coordonat +obiectului ce este ataşat. Around y-axis: - Around y-axis: + În jurul axei y: Rotation around the y-axis Note: The placement is expressed in local coordinate system of object being attached. - Rotation around the y-axis -Note: The placement is expressed in local coordinate system -of object being attached. + Rotaţie în jurul axei y +Notă: Plasamentul este exprimat în sistemul local coordonat +obiectului de ataşat. Around z-axis: - Around z-axis: + În jurul axei z: Rotation around the z-axis Note: The placement is expressed in local coordinate system of object being attached. - Rotation around the z-axis -Note: The placement is expressed in local coordinate system -of object being attached. + Rotaţie în jurul axei z +Notă: Plasamentul este exprimat în sistemul local coordonat +obiectului ce este ataşat. Flip side of attachment and offset - Flip side of attachment and offset + Întoarce o parte a atașamentului și a ofsetului @@ -5085,7 +5085,7 @@ of object being attached. Not editable because rotation of AttachmentOffset is bound by expressions. - Not editable because rotation of AttachmentOffset is bound by expressions. + Nu este editabil pentru că rotaţia de AttachmentOffset este legată de expresii. @@ -5119,181 +5119,181 @@ of object being attached. Skip settings page - Skip settings page + Omite pagina de setări Skip this settings page and run the geometry check automatically. Default: false - Skip this settings page and run the geometry check automatically. -Default: false + Sari peste această pagină de setări și rulează verificarea geometriei automat. +Implicit: fals Run BOP check - Run BOP check + Rulează verificarea BOP Extra boolean operations check that can sometimes find errors that the standard BRep geometry check misses. These errors do not always mean the checked object is unusable. Default: false - Extra boolean operations check that can sometimes find errors that -the standard BRep geometry check misses. These errors do not always -mean the checked object is unusable. Default: false + Verificarea operațiilor suplimentare booleene care pot găsi uneori erori pe care +verificarea geometriei BRep o ratează. Aceste erori nu întotdeauna +înseamnă că obiectul verificat este inutilizabil. Implicit: fals Single-threaded - Single-threaded + Fixare unică Run the geometry check in a single thread. This is slower, but more stable. Default: false - Run the geometry check in a single thread. This is slower, -but more stable. Default: false + Rulează verificarea geometriei într-o singură discuție. Acest lucru este mai lent, +dar mai stabil. Implicit: fals Log errors - Log errors + Jurnal erori Log errors to report view. Default: true - Log errors to report view. Default: true + Înregistrează erorile pentru a raporta vizualizarea. Implicit: adevărat Expand shape content - Expand shape content + Extindeți conținutul formei Expand shape content. Changes will take effect next time you use the check geometry tool. Default: false - Expand shape content. Changes will take effect next time you use -the check geometry tool. Default: false + Extindeți conținutul de formă. Modificările vor intra în vigoare data viitoare când utilizați +unealta de verificare a geometriei. Implicit: false Advanced shape content - Advanced shape content + Conținut de formă avansată Show advanced shape content. Changes will take effect next time you use the check geometry tool. Default: false - Show advanced shape content. Changes will take effect next time you use -the check geometry tool. Default: false + Afișare conținut avansat de formă. Modificările vor intra în vigoare data viitoare când utilizați +unealta de verificare a geometriei. Implicit: false Individual BOP Checks: - -Individual BOP Checks: + +Verificări BOP individuale: Bad type - Bad type + Tip greșit Check for bad argument types. Default: true - Check for bad argument types. Default: true + Verifică după tipuri de argumente greșite. Implicit: adevărat Self-intersect - Self-intersect + Auto-intersectare Check for self-intersections. Default: true - Check for self-intersections. Default: true + Verifică după intersecții. Implicit: adevărat Too small edge - Too small edge + Marginea prea mică Check for edges that are too small. Default: true - Check for edges that are too small. Default: true + Verifică dacă muchiile sunt prea mici. Implicit: adevărat Nonrecoverable face - Nonrecoverable face + Faţă nerecuperabilă Check for nonrecoverable faces. Default: true - Check for nonrecoverable faces. Default: true + Verifică pentru fețe nerecuperabile. Implicit: adevărat Continuity - Continuity + Continuitate Check for continuity. Default: true - Check for continuity. Default: true + Verificare continuitate. Implicit: adevărat Incompatibility of face - Incompatibility of face + Incompatibilitatea feţei Check for incompatible faces. Default: true - Check for incompatible faces. Default: true + Verifică dacă există fețe incompatibile. Implicit: adevărat Incompatibility of vertex - Incompatibility of vertex + Incompatibilitatea cu vertex Check for incompatible vertices. Default: true - Check for incompatible vertices. Default: true + Verifică dacă există noduri incompatibile. Implicit: adevărat Incompatibility of edge - Incompatibility of edge + Incompatibilitatea marginii Check for incompatible edges. Default: true - Check for incompatible edges. Default: true + Verifică pentru margini incompatibile. Implicit: adevărat Invalid curve on surface - Invalid curve on surface + Curbă nevalidă pe suprafață Check for invalid curves on surfaces. Default: true - Check for invalid curves on surfaces. Default: true + Verifică pentru curbe invalide pe suprafețe. Implicit: adevărat Run check - Run check + Execută verificarea Results - Results + Rezultate @@ -5301,12 +5301,12 @@ Individual BOP Checks: Check Geometry Results - Check Geometry Results + Verifică rezultatele geometriei Check is running... - Check is running... + Verificarea rulează... @@ -5317,7 +5317,7 @@ Individual BOP Checks: Checked object - Checked object + Obiectul verificat @@ -5333,7 +5333,7 @@ Individual BOP Checks: Don't show this dialog again - Don't show this dialog again + Nu mai afișa acest dialog @@ -5346,7 +5346,7 @@ Individual BOP Checks: Click on the faces in the 3D view to select them - Click on the faces in the 3D view to select them + Faceți clic pe fețe în vizualizarea 3D pentru a le selecta @@ -5356,7 +5356,7 @@ Individual BOP Checks: Resets color for all faces of the part - Resets color for all faces of the part + Resetează culoarea pentru toate fețele din parte @@ -5367,8 +5367,8 @@ Individual BOP Checks: When checked, the you can select multiple faces by dragging a selection rectangle in the 3D view - When checked, the you can select multiple faces -by dragging a selection rectangle in the 3D view + Când este bifat, poți selecta mai multe fețe +prin glisarea unui dreptunghi de selecție în vizualizarea 3D @@ -5525,7 +5525,7 @@ by dragging a selection rectangle in the 3D view Box selection... - Box selection... + Selectare Casetă... @@ -5569,7 +5569,7 @@ in vizualizarea 3D pentru calea maturarii. Tube - Tube + Tub @@ -5579,12 +5579,12 @@ in vizualizarea 3D pentru calea maturarii. Outer radius - Outer radius + Raza exterioară Inner radius - Inner radius + Raza interioară @@ -5673,7 +5673,7 @@ in vizualizarea 3D pentru calea maturarii. Part and Part Design workbench - Part and Part Design workbench + Masă de lucru pentru proiectarea pieselor și părților @@ -5681,7 +5681,7 @@ in vizualizarea 3D pentru calea maturarii. Part/Part Design - Part/Part Design + Design componentă/capitol @@ -5982,7 +5982,7 @@ Do you want to continue? Out Of Enum Range: - Out Of Enum Range: + În afara intervalului de enumerare: @@ -6065,27 +6065,27 @@ Do you want to continue? Selection - Selection + Selecţie Reset selection - Reset selection + Resetare selecție Toggle direct dimensions - Toggle direct dimensions + Comutare dimensiuni directe Toggle orthogonal dimensions - Toggle orthogonal dimensions + Comută dimensiunile ortogonale Clear all dimensions - Clear all dimensions + Șterge toate dimensiunile @@ -6125,22 +6125,22 @@ Do you want to continue? Attachment editor - Attachment editor + Editor de ataşamente Create tube - Create tube + Creare tub Distance in parameter space - Distance in parameter space + Distanța în spațiul parametrului Enter distance: - Enter distance: + Introduceţi distanţa: @@ -6198,7 +6198,7 @@ Do you want to continue? Create a copy - Create a copy + Creează o copie @@ -6211,12 +6211,12 @@ Do you want to continue? Create tube - Create tube + Creare tub Creates a tube - Creates a tube + Creează un tub @@ -6224,12 +6224,12 @@ Do you want to continue? Computing the result failed with an error: - Computing the result failed with an error: + Calcularea rezultatului a eșuat cu o eroare: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Faceţi clic pe "Continuaţi" pentru a crea funcţia oricum, sau pe 'Abandonează' pentru a anula. @@ -6237,7 +6237,7 @@ Do you want to continue? Bad selection - Bad selection + Selecție greșită @@ -6247,17 +6247,17 @@ Do you want to continue? Select at least two objects, or one or more compounds - Select at least two objects, or one or more compounds + Selectați cel puțin două obiecte sau unul sau mai mulți compuși Select base object, then the object to embed, and then invoke this tool. - Select base object, then the object to embed, and then invoke this tool. + Selectați obiectul de bază, apoi obiectul de încorporat, și apoi invocați această unealtă. Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. - Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. + Selectați obiectul pentru a face o decupare, apoi obiectul care ar trebui să se potrivească în decupare, și apoi invocați această unealtă. @@ -6265,12 +6265,12 @@ Do you want to continue? Connect objects - Connect objects + Conectează obiectele Fuses objects, taking care to preserve voids. - Fuses objects, taking care to preserve voids. + Fuzionează obiectele, având grijă să conserve golurile. @@ -6278,12 +6278,12 @@ Do you want to continue? Embed object - Embed object + Obiect încorporat Fuses one object into another, taking care to preserve voids. - Fuses one object into another, taking care to preserve voids. + Fuzionează un obiect în altul, având grijă să păstreze golurile. @@ -6291,12 +6291,12 @@ Do you want to continue? Cutout for object - Cutout for object + Reducere pentru obiect Makes a cutout in one object to fit another object. - Makes a cutout in one object to fit another object. + Face o decupare într-un obiect pentru a se potrivi cu un alt obiect. @@ -6306,14 +6306,14 @@ Do you want to continue? Computing the result failed with an error: - Computing the result failed with an error: + Calcularea rezultatului a eșuat cu o eroare: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Faceţi clic pe "Continuaţi" pentru a crea funcţia oricum, sau pe 'Abandonează' pentru a anula. @@ -6324,7 +6324,7 @@ Do you want to continue? Bad selection - Bad selection + Selecție greșită @@ -6337,7 +6337,7 @@ Do you want to continue? Boolean fragments - Boolean fragments + Fragmente booleene @@ -6346,54 +6346,54 @@ or from the shapes inside a compound. This is a boolean union which is then sliced at the intersections of the original shapes. A 'Compound Filter' can be used to extract the individual slices. - Create a 'Boolean Fragments' object from two or more selected objects, -or from the shapes inside a compound. -This is a boolean union which is then sliced at the intersections -of the original shapes. -A 'Compound Filter' can be used to extract the individual slices. + Creează un obiect "Fragmente Boolene" din două sau mai multe obiecte selectate, +sau din formele din interiorul unui compus. +Aceasta este o uniune booleană care este apoi feliată la intersecţiile +ale formelor originale. +Un "Filtru combinat" poate fi folosit pentru a extrage secţiunile individuale. Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). - Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + Selectaţi cel puţin două obiecte sau unul sau mai mulţi compuşi. În cazul în care un singur compus este selectat, formele compuse vor fi intersectate între ele (în caz contrar, compușii cu auto-intersecții sunt invalizi). Slice to compound - Slice to compound + Secţiune de compus Slice a selected object by using other objects as cutting tools. The resulting pieces will be stored in a compound. A 'Compound Filter' can be used to extract the individual slices. - Slice a selected object by using other objects as cutting tools. -The resulting pieces will be stored in a compound. -A 'Compound Filter' can be used to extract the individual slices. + Adună un obiect selectat folosind alte obiecte ca unelte de tăiere. +Piesele rezultate vor fi stocate într-un compus. +Un "Filtru compus" poate fi folosit pentru a extrage secţiunile individuale. Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. - Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. + Selectaţi cel puţin două obiecte. Primul este obiectul care trebuie tăiat; restul sunt obiecte cu care să tăiaţi. Slice apart - Slice apart + Secţiune separată Slice a selected object by other objects, and split it apart. It will create a 'Compound Filter' for each slice. - Slice a selected object by other objects, and split it apart. -It will create a 'Compound Filter' for each slice. + Adună un obiect selectat de alte obiecte și îl împarte separat. +Va crea un 'Filtru compus' pentru fiecare secțiune. Boolean XOR - Boolean XOR + Boolean XOR @@ -6401,10 +6401,10 @@ It will create a 'Compound Filter' for each slice. or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - Perform an 'exclusive OR' boolean operation with two or more selected objects, -or with the shapes inside a compound. -This means the overlapping volumes of the shapes will be removed. -A 'Compound Filter' can be used to extract the remaining pieces. + Efectuează o operație booleană "exclusivă SAU" cu două sau mai multe obiecte selectate, +sau cu formele din interiorul unui compus. +Acest lucru înseamnă că volumele de forme care se suprapun vor fi șterse. +Un "Filtru combinat" poate fi folosit pentru a extrage piesele rămase. @@ -6420,31 +6420,31 @@ A 'Compound Filter' can be used to extract the remaining pieces. area, or length, or by choosing specific items. If a second object is selected, it will be used as reference, for example, for collision or distance filtering. - Filter out objects from a selected compound by characteristics like volume, -area, or length, or by choosing specific items. -If a second object is selected, it will be used as reference, for example, -for collision or distance filtering. + Filtrează obiectele dintr-un compus selectat după caracteristici, cum ar fi volumul, zona +sau lungimea, sau prin alegerea unor elemente specifice. +Dacă este selectat un al doilea obiect, acesta va fi folosit ca referință, de exemplu, +pentru coliziune sau filtrare la distanță. First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. - First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + Mai întâi selectați o formă care este un compus. Dacă un al doilea obiect este selectat (opțional), acesta va fi tratat ca o stencil. Bad selection - Bad selection + Selecție greșită Computing the result failed with an error: - Computing the result failed with an error: + Calcularea rezultatului a eșuat cu o eroare: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Faceţi clic pe "Continuaţi" pentru a crea funcţia oricum, sau pe 'Abandonează' pentru a anula. @@ -6452,24 +6452,24 @@ for collision or distance filtering. Explode compound - Explode compound + Complet de explozii Split up a compound of shapes into separate objects. It will create a 'Compound Filter' for each shape. - Split up a compound of shapes into separate objects. -It will create a 'Compound Filter' for each shape. + Împarte un ansamblu de forme în obiecte separate. +Va crea un "Filtru compus" pentru fiecare formă. First select a shape that is a compound. - First select a shape that is a compound. + Mai întâi selectaţi o formă care este un compus. Bad selection - Bad selection + Selecție greșită @@ -6477,22 +6477,22 @@ It will create a 'Compound Filter' for each shape. No object named {} - No object named {} + Niciun obiect numit {} Failed to parse link (more than one colon encountered) - Failed to parse link (more than one colon encountered) + Analiza link-ului a eșuat (mai mult de o colon întâlnit) Object {} is neither movable nor attachable, can't edit attachment - Object {} is neither movable nor attachable, can't edit attachment + Obiectul {} nu este nici mobil, nici ataşabil, nu se poate edita ataşamentul {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. - {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + {} nu este ataşabil. Puteţi utiliza în continuare editorul de ataşament pentru a alinia obiectul, dar ataşamentul nu va fi parametric. @@ -6509,27 +6509,27 @@ It will create a 'Compound Filter' for each shape. Edit attachment of {} - Edit attachment of {} + Editare atașament de {} Ignored. Can't attach object to itself! - Ignored. Can't attach object to itself! + Ignorat. Nu se poate ataşa obiectul! {} depends on object being attached, can't use it for attachment - {} depends on object being attached, can't use it for attachment + {} depinde de obiectul atașat, nu se poate folosi pentru atașament {} (add {}) - {} (add {}) + {} (adaugă {}) {} (add more references) - {} (add more references) + {} (adaugă mai multe referințe) @@ -6539,7 +6539,7 @@ It will create a 'Compound Filter' for each shape. Reference{} - Reference{} + Referință{} @@ -6549,7 +6549,7 @@ It will create a 'Compound Filter' for each shape. Failed to resolve links. {} - Failed to resolve links. {} + Nu s-au rezolvat link-urile. {} @@ -6559,12 +6559,12 @@ It will create a 'Compound Filter' for each shape. Attached with mode {} - Attached with mode {} + Atașat cu modul {} Error: {} - Error: {} + Eroare: {} @@ -6582,12 +6582,12 @@ It will create a 'Compound Filter' for each shape. Attachment... - Attachment... + Atașare... Edit attachment of selected object. - Edit attachment of selected object. + Editează atașamentul obiectului selectat. @@ -6595,12 +6595,12 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + Tip de formă Vertices - Vertices + Noduri @@ -6630,7 +6630,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + CompSolide @@ -6670,7 +6670,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + Centru de curbă @@ -6685,7 +6685,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + Este închis @@ -6695,12 +6695,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Centru global de masă Global placement - Global placement + Plasament global diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index f78965b6cd..a5befaf977 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -1911,12 +1911,12 @@ into its X, Y, and Z components. Create points object from geometry - Create points object from geometry + Создать объект точек из геометрии Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Создать объект выделенных точек из выбранного геометрического объекта @@ -2303,7 +2303,7 @@ of projection. Points from geometry - Points from geometry + Точки от геометрии @@ -5318,7 +5318,7 @@ Individual BOP Checks: Checked object - Checked object + Проверяемый объект @@ -6133,12 +6133,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Расстояние в пространстве параметров Enter distance: - Enter distance: + Введите расстояние: @@ -6598,7 +6598,7 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + Тип фигуры @@ -6633,7 +6633,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + Составные вещества @@ -6673,7 +6673,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + Центр кривой @@ -6688,7 +6688,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + Закрыто @@ -6698,12 +6698,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Глобальный центр массы Global placement - Global placement + Глобальное размещение diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index f1f58ff36e..08af54cca7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -1912,12 +1912,12 @@ na svoje X, Y in Z komponente. Create points object from geometry - Create points object from geometry + Iz geometrije naredi točkovni predmet Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Iz izbrane geometrije ustvari izberljiv točkovni predmet @@ -2304,7 +2304,7 @@ pogleda kamere. Points from geometry - Points from geometry + Točke iz geometrije @@ -5322,7 +5322,7 @@ Posamezne OLV preverbe: Checked object - Checked object + Preverjen predmet @@ -6140,12 +6140,12 @@ Ali želite nadaljevati? Distance in parameter space - Distance in parameter space + Razdalja v določilovnem prostoru Enter distance: - Enter distance: + Vnesite razdaljo: @@ -6599,7 +6599,7 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Shape type - Shape type + Vrsta oblike @@ -6634,7 +6634,7 @@ Za vsako obliko bo ustvarjeno "Sito sestava". CompSolids - CompSolids + Telesja @@ -6674,7 +6674,7 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Curve center - Curve center + Središče krivulje @@ -6689,7 +6689,7 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Is closed - Is closed + Je zaprto @@ -6699,12 +6699,12 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Global center of mass - Global center of mass + Obče težišče Global placement - Global placement + Obča postavitev diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts index 9379bd7537..da2c022bb2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts @@ -49,7 +49,7 @@ Conic Attacher reference type - Konus + Kupa @@ -79,7 +79,7 @@ Sphere Attacher reference type - Sfera + Lopta @@ -91,7 +91,7 @@ Cylinder Attacher reference type - Cilindar + Valjak @@ -1571,7 +1571,7 @@ t. j. X, Y i Z komponente direktnih kota. Create a cone solid - Napravi konično puno telo + Napravi kupasto puno telo @@ -1622,12 +1622,12 @@ t. j. X, Y i Z komponente direktnih kota. Cylinder - Cilindar + Valjak Create a Cylinder - Napravi cilindar + Napravi valjak @@ -1910,12 +1910,12 @@ t. j. X, Y i Z komponente direktnih kota. Create points object from geometry - Create points object from geometry + Napravi tačkasti objekat na osnovu geometrije Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Napravi objekat tačaka (koje se mogu birati) od izabranog geometrijskog objekta @@ -2109,12 +2109,12 @@ projekcije. Create Cylinder... - Napravi Cilindar... + Napravi valjak... Create a Cylinder - Napravi cilindar + Napravi valjak @@ -2129,7 +2129,7 @@ projekcije. Sphere - Sfera + Lopta @@ -2297,12 +2297,12 @@ projekcije. Create Part Cylinder - Napravi cilindar + Napravi valjak Points from geometry - Points from geometry + Tačke na osnovu geometrije @@ -2805,7 +2805,7 @@ veličina sačuvane STEP datoteke. Reversed - Reversed + Obrnuti smer @@ -3553,7 +3553,7 @@ during file reading (slower but higher details). Cylinder - Cilindar + Valjak @@ -3565,7 +3565,7 @@ during file reading (slower but higher details). Sphere - Sfera + Lopta @@ -4039,7 +4039,7 @@ during file reading (slower but higher details). Select reference - Izaberi referencu + Izaberi sopstvenu @@ -5317,7 +5317,7 @@ Pojedinačne provere bulovih operacija: Checked object - Checked object + Proveren objekat @@ -6134,12 +6134,12 @@ Da li želiš da nastaviš? Distance in parameter space - Distance in parameter space + Rastojanje u parametarskom prostoru Enter distance: - Enter distance: + Unesi rastojanje: @@ -6594,7 +6594,7 @@ To će stvoriti 'Filter sastavljanja' za svaki oblik. Shape type - Shape type + Vrsta oblika @@ -6629,7 +6629,7 @@ To će stvoriti 'Filter sastavljanja' za svaki oblik. CompSolids - CompSolids + Kombinovano puno telo @@ -6669,7 +6669,7 @@ To će stvoriti 'Filter sastavljanja' za svaki oblik. Curve center - Curve center + Centar krive @@ -6684,7 +6684,7 @@ To će stvoriti 'Filter sastavljanja' za svaki oblik. Is closed - Is closed + Zatvoren @@ -6694,12 +6694,12 @@ To će stvoriti 'Filter sastavljanja' za svaki oblik. Global center of mass - Global center of mass + Opšti centar mase Global placement - Global placement + Opšti položaj diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index 6e09c31137..f625ea1dc4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -79,7 +79,7 @@ Sphere Attacher reference type - Сфера + Лопта @@ -91,7 +91,7 @@ Cylinder Attacher reference type - Цилиндар + Ваљак @@ -1571,7 +1571,7 @@ into its X, Y, and Z components. Create a cone solid - Направи конично пуно тело + Направи купасто пуно тело @@ -1622,12 +1622,12 @@ into its X, Y, and Z components. Cylinder - Цилиндар + Ваљак Create a Cylinder - Направи Цилиндар + Направи ваљак @@ -1910,12 +1910,12 @@ into its X, Y, and Z components. Create points object from geometry - Create points object from geometry + Направи тачкасти објекат на основу геометрије Create selectable points object from selected geometric object - Create selectable points object from selected geometric object + Направи објекат тачака (које се могу бирати) од изабраног геометријског објекта @@ -2109,12 +2109,12 @@ of projection. Create Cylinder... - Направи Цилиндар... + Направи ваљак... Create a Cylinder - Направи Цилиндар + Направи ваљак @@ -2129,7 +2129,7 @@ of projection. Sphere - Сфера + Лопта @@ -2297,12 +2297,12 @@ of projection. Create Part Cylinder - Направи Цилиндар + Направи ваљак Points from geometry - Points from geometry + Тачке на основу геометрије @@ -2805,7 +2805,7 @@ the size of the resulting STEP file. Reversed - Обрнуто + Обрнути смер @@ -3553,7 +3553,7 @@ during file reading (slower but higher details). Cylinder - Цилиндар + Ваљак @@ -3565,7 +3565,7 @@ during file reading (slower but higher details). Sphere - Сфера + Лопта @@ -4039,7 +4039,7 @@ during file reading (slower but higher details). Select reference - Изабери референцу + Изабери сопствену @@ -5316,7 +5316,7 @@ Individual BOP Checks: Checked object - Checked object + Проверен објекат @@ -6133,12 +6133,12 @@ Do you want to continue? Distance in parameter space - Distance in parameter space + Растојање у параметарском простору Enter distance: - Enter distance: + Унеси растојање: @@ -6593,7 +6593,7 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + Врста облика @@ -6628,7 +6628,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + Комбиновано пуно тело @@ -6668,7 +6668,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + Центар криве @@ -6683,7 +6683,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + Затворен @@ -6693,12 +6693,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Општи центар масе Global placement - Global placement + Општи положај diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 00dfc9fda5..388a9b9e51 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -2763,7 +2763,7 @@ the size of the resulting STEP file. Extrude - İhraç etmek + Katıla diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 72c890747e..7d6233a82b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -109,7 +109,7 @@ Object Attacher reference type - 物件 + 物體 @@ -214,7 +214,7 @@ Intersection AttachmentPoint mode caption - 交集 + 交錯 @@ -392,7 +392,7 @@ Binormal AttachmentLine mode caption - Binormal + 次法線 @@ -435,7 +435,7 @@ Intersection AttachmentLine mode caption - 交集 + 交錯 @@ -1109,7 +1109,7 @@ Profile - 外觀 + 輪廓特徵 @@ -1286,7 +1286,7 @@ if the measured points have moved. Toggle 3D - Toggle 3D + 切換 3D @@ -1458,7 +1458,7 @@ into its X, Y, and Z components. Intersection - 交集 + 交錯 @@ -2177,7 +2177,7 @@ of projection. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -2557,7 +2557,7 @@ Note: The placement is expressed in local space of object being attached. Intersection - 交集 + 交錯 @@ -3358,7 +3358,7 @@ during file reading (slower but higher details). Single document - Single document + 單一文件 @@ -3724,12 +3724,12 @@ during file reading (slower but higher details). U parameter: - 繞指定軸角度： + 繞指定軸角度: V parameters: - 與指定軸之夾角： + 與指定軸之夾角: @@ -3740,12 +3740,12 @@ during file reading (slower but higher details). V parameter: - 與指定軸之夾角： + 與指定軸之夾角: U Parameter: - 繞指定軸角度： + 繞指定軸角度: @@ -3757,7 +3757,7 @@ during file reading (slower but higher details). Circumradius: - 外接圓 + 外接圓: @@ -3787,12 +3787,12 @@ during file reading (slower but higher details). Pitch: - 俯仰： + 俯仰: Coordinate system: - 座標系統： + 座標系統: @@ -3807,24 +3807,24 @@ during file reading (slower but higher details). Growth: - 成長： + 增長: Number of rotations: - 迴旋數量： + 迴旋數量: Angle 1: - 角度 1： + 角度 1: Angle 2: - 角度 2： + 角度 2: @@ -3834,12 +3834,12 @@ during file reading (slower but higher details). Major radius: - 主半徑： + 主半徑: Minor radius: - 次要半徑： + 次要半徑: @@ -3862,12 +3862,12 @@ during file reading (slower but higher details). Start point - 起始點 + 起點 End point - 最末點 + 終點 @@ -3923,7 +3923,7 @@ during file reading (slower but higher details). Show all - Show all + 顯示全部 @@ -4754,7 +4754,7 @@ only created cuts will be visible Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -4867,7 +4867,7 @@ only created cuts will be visible Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -5424,7 +5424,7 @@ by dragging a selection rectangle in the 3D view Pipe - 管 + 貫穿 @@ -5439,7 +5439,7 @@ by dragging a selection rectangle in the 3D view Arc - 弧 + 圓弧 @@ -5450,7 +5450,7 @@ by dragging a selection rectangle in the 3D view Intersection - 交集 + 交錯 @@ -5470,7 +5470,7 @@ by dragging a selection rectangle in the 3D view Update view - 更新視圖 + 更新檢視 @@ -5557,7 +5557,7 @@ by dragging a selection rectangle in the 3D view Frenet - Frenet + 弗倫內公式(Frenet) @@ -5699,7 +5699,7 @@ in the 3D view for the sweep path. Wrong selection - 錯誤的選取 + 錯誤的選擇 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 6e48beb2c9..ff536b559e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -123,7 +123,7 @@ damit eine Selbstdurchdringung vermieden wird. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Der Abstand, um den das Referenzprofil nach außen verschoben ist, normiert durch den Modul. @@ -1078,7 +1078,7 @@ damit eine Selbstdurchdringung vermieden wird. Profile Shift Coefficient - Profile Shift Coefficient + Profilverschiebungskoeffizient @@ -4546,8 +4546,8 @@ Nur für Bohrungen ohne Gewinde verfügbar For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Für Kegelsenkungen ist dies die Höhe des +Schraubenkopfes unter der Oberfläche diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts index 53b5075a45..31301e32cb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts @@ -123,7 +123,7 @@ False=engranaje interno The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + La distancia por la cual el perfil de referencia se desplaza hacia afuera, normalizado por el módulo. @@ -1078,7 +1078,7 @@ False=engranaje interno Profile Shift Coefficient - Profile Shift Coefficient + Coeficiente de desplazamiento del perfil @@ -1615,7 +1615,7 @@ haga clic de nuevo para finalizar la selección Empty chamfer created ! - Empty chamfer created ! + ¡Bisel vacío creado! @@ -1716,7 +1716,7 @@ haga clic de nuevo para finalizar la selección Empty draft created ! - Empty draft created ! + ¡Calado vacío creado! @@ -1921,7 +1921,7 @@ haga clic de nuevo para finalizar la selección Empty fillet created ! - Empty fillet created ! + ¡Redondeo vacío creado! @@ -3144,7 +3144,7 @@ haga clic de nuevo para finalizar la selección Empty thickness created ! - Empty thickness created ! + ¡Espesor vacío creado! @@ -4549,8 +4549,8 @@ Sólo disponible para agujeros sin rosca For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Para avellanados esta es la profundidad de +la parte superior del tornillo debajo de la superficie diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 3b66f6d4ad..1c471af82b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -123,7 +123,7 @@ para que se evite la auto intersección. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + La distancia por la cual el perfil de referencia se desplaza hacia afuera, normalizado por el módulo. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 2b63adc1da..c08777964d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -122,7 +122,7 @@ so that self intersection is avoided. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Erreferentziako profila kanporantz eramaten den distantzia, moduluaren arabera normalizatuta. @@ -1077,7 +1077,7 @@ so that self intersection is avoided. Profile Shift Coefficient - Profile Shift Coefficient + Profilaren desplazamendu-koefizientea @@ -1614,7 +1614,7 @@ sakatu berriro hautapena amaitzeko Empty chamfer created ! - Empty chamfer created ! + Hutsik dagoen biribilketa sortua! @@ -1715,7 +1715,7 @@ sakatu berriro hautapena amaitzeko Empty draft created ! - Empty draft created ! + Hutsik dagoen zirriborroa sortua! @@ -1920,7 +1920,7 @@ sakatu berriro hautapena amaitzeko Empty fillet created ! - Empty fillet created ! + Hutsik dagoen alaka sortua! @@ -3144,7 +3144,7 @@ sakatu berriro hautapena amaitzeko Empty thickness created ! - Empty thickness created ! + Hutsik dagoen lodiera sortua! @@ -4548,8 +4548,8 @@ Haririk ez duten zuloetan soilik erabilgarri For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Abeilanatzeetarako, hau da torlojuaren +gainaldearen sakonera azaleraren azpitik diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index 957223a2bd..df3c8460ea 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -124,7 +124,7 @@ False=engrenage interne The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + La distance à partir de laquelle le profil de référence est déplacé vers l'extérieur, normalisé par le module. @@ -1079,7 +1079,7 @@ False=engrenage interne Profile Shift Coefficient - Profile Shift Coefficient + Coefficient de décalage du profil @@ -1614,8 +1614,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! - + Création d'un chanfrein vide ! @@ -1714,8 +1713,7 @@ click again to end selection Empty draft created ! - Empty draft created ! - + Création d'une dépouille vide ! @@ -1918,7 +1916,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + Création d'un congé vide ! @@ -3141,8 +3139,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! - + Création d'une coque vide ! @@ -4538,8 +4535,7 @@ Only available for holes without thread For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Pour les fraisages, il s'agit de la profondeur de la partie supérieure de la vis sous la surface. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 09e1a15cb1..d40eff7e19 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -123,7 +123,7 @@ az önmetszés elkerülése érdekében. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + A távolság, amellyel a referenciaprofil kifelé tolódik, a modul által normalizálva. @@ -1078,7 +1078,7 @@ az önmetszés elkerülése érdekében. Profile Shift Coefficient - Profile Shift Coefficient + Profileltolódási együttható @@ -1611,7 +1611,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + Üres letörést hozott létre ! @@ -1711,7 +1711,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + Üres tervrajzot hozott létre ! @@ -1915,7 +1915,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + Üres lekerekítést hozott létre ! @@ -3137,7 +3137,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! + Üres vastagságot hozott létre ! @@ -4541,8 +4541,8 @@ Csak menet nélküli furatokhoz érhető el For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Süllyesztéseknél ez a mélység a +a csavar teteje a felszín alatt diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts index a83cd6072b..b0759b7fc3 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts @@ -80,6 +80,51 @@ so that self intersection is avoided. If false, the tool will propose an initial value for the pitch based on the profile bounding box, so that self intersection is avoided. + + + Number of gear teeth + Number of gear teeth + + + + Modules of the gear + Modules of the gear + + + + Pressure angle of gear teeth + Pressure angle of gear teeth + + + + True=2 curves with each 3 control points False=1 curve with 4 control points. + True=2 curves with each 3 control points False=1 curve with 4 control points. + + + + True=external Gear False=internal Gear + True=external Gear False=internal Gear + + + + The height of the tooth from the pitch circle up to its tip, normalized by the module. + The height of the tooth from the pitch circle up to its tip, normalized by the module. + + + + The height of the tooth from the pitch circle down to its root, normalized by the module. + The height of the tooth from the pitch circle down to its root, normalized by the module. + + + + The radius of the fillet at the root of the tooth, normalized by the module. + The radius of the fillet at the root of the tooth, normalized by the module. + + + + The distance by which the reference profile is shifted outwards, normalized by the module. + The distance by which the reference profile is shifted outwards, normalized by the module. + CmdPartDesignAdditiveHelix @@ -156,17 +201,17 @@ so that self intersection is avoided. CmdPartDesignBoolean - + PartDesign GambarBagian - + Boolean operation Operasi boolean - + Boolean operation with two or more bodies Boolean operasi dengan dua atau lebih badan @@ -192,17 +237,17 @@ so that self intersection is avoided. CmdPartDesignChamfer - + PartDesign GambarBagian - + Chamfer Talang - + Chamfer the selected edges of a shape Talang tepi yang dipilih dari bentuk @@ -228,17 +273,17 @@ so that self intersection is avoided. CmdPartDesignDraft - + PartDesign GambarBagian - + Draft Konsep - + Make a draft on a face Buat draf di wajah @@ -246,17 +291,17 @@ so that self intersection is avoided. CmdPartDesignDuplicateSelection - + PartDesign GambarBagian - + Duplicate selected object Gandakan objek yang dipilih - + Duplicates the selected object and adds it to the active body Duplikat objek yang dipilih dan tambahkan ke badan aktif @@ -264,17 +309,17 @@ so that self intersection is avoided. CmdPartDesignFillet - + PartDesign GambarBagian - + Fillet Fillet - + Make a fillet on an edge, face or body Buat fillet di tepi, muka atau badan @@ -336,17 +381,17 @@ so that self intersection is avoided. CmdPartDesignLinearPattern - + PartDesign GambarBagian - + LinearPattern LinearPattern - + Create a linear pattern feature Create a linear pattern feature @@ -354,17 +399,17 @@ so that self intersection is avoided. CmdPartDesignMigrate - + PartDesign GambarBagian - + Migrate Migrasi - + Migrate document to the modern PartDesign workflow Migrate document to the modern PartDesign workflow @@ -372,17 +417,17 @@ so that self intersection is avoided. CmdPartDesignMirrored - + PartDesign GambarBagian - + Mirrored Tercermin - + Create a mirrored feature Create a mirrored feature @@ -390,17 +435,17 @@ so that self intersection is avoided. CmdPartDesignMoveFeature - + PartDesign GambarBagian - + Move object to other body Move object to other body - + Moves the selected object to another body Moves the selected object to another body @@ -408,17 +453,17 @@ so that self intersection is avoided. CmdPartDesignMoveFeatureInTree - + PartDesign GambarBagian - + Move object after other object Pindahkan objek setelah objek lainnya - + Moves the selected object and insert it after another object Memindahkan objek yang dipilih dan memasukkannya ke objek lain @@ -426,17 +471,17 @@ so that self intersection is avoided. CmdPartDesignMoveTip - + PartDesign GambarBagian - + Set tip Set tip - + Move the tip of the body Pindahkan ujung tubuh @@ -444,17 +489,17 @@ so that self intersection is avoided. CmdPartDesignMultiTransform - + PartDesign GambarBagian - + Create MultiTransform Buat MultiTransform - + Create a multitransform feature Create a multitransform feature @@ -552,17 +597,17 @@ so that self intersection is avoided. CmdPartDesignPolarPattern - + PartDesign GambarBagian - + PolarPattern PolarPattern - + Create a polar pattern feature Create a polar pattern feature @@ -588,17 +633,17 @@ so that self intersection is avoided. CmdPartDesignScaled - + PartDesign GambarBagian - + Scaled Berskala - + Create a scaled feature Create a scaled feature @@ -692,17 +737,17 @@ so that self intersection is avoided. CmdPartDesignThickness - + PartDesign GambarBagian - + Thickness Thickness - + Make a thick solid Buatlah padat yang tebal @@ -838,8 +883,8 @@ so that self intersection is avoided. Create Clone - + Make copy Buat salinan @@ -854,63 +899,63 @@ so that self intersection is avoided. Create a new Sketch - + Convert to MultiTransform feature Convert to MultiTransform feature - + Create Boolean Create Boolean - + Add a Body Add a Body - + Migrate legacy part design features to Bodies Migrate legacy part design features to Bodies - + Move tip to selected feature Move tip to selected feature - + Duplicate a PartDesign object Duplicate a PartDesign object - + Move an object Move an object - + Move an object inside tree Move an object inside tree - + Mirrored Tercermin - + Make LinearPattern Make LinearPattern - + PolarPattern PolarPattern - + Scaled Berskala @@ -1015,6 +1060,26 @@ so that self intersection is avoided. External gear: Gigi eksternal: + + + Addendum Coefficient + Addendum Coefficient + + + + Dedendum Coefficient + Dedendum Coefficient + + + + Root Fillet Coefficient + Root Fillet Coefficient + + + + Profile Shift Coefficient + Profile Shift Coefficient + PartDesign::Groove @@ -1033,7 +1098,7 @@ so that self intersection is avoided. PartDesign::Hole - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -1438,39 +1503,39 @@ Jika nol, sama dengan Radius2 Parameter primitif - + Cone radii are equal Cone radii are equal - + The radii for cones must not be equal! The radii for cones must not be equal! - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min harus tidak sama dengan X max! - + Y min must not be equal to Y max! Y min harus tidak sama dengan Y max! - + Z min must not be equal to Z max! Z min harus tidak sama dengan Z max! - + Create primitive Buat primitif @@ -1483,93 +1548,75 @@ Jika nol, sama dengan Radius2 Bentuk - - - + Click button to enter selection mode, click again to end selection Klik tombol untuk masuk model seleksi, klik lagi untuk mengakhiri seleksi - - Add - Menambahkan + + Select + Memilih - - Remove - Menghapus - - - + - select an item to highlight it - double-click on an item to see the chamfers - select an item to highlight it - double-click on an item to see the chamfers - + Type Jenis - + Equal distance Jarak yang sama - + Two distances Dua jarak - + Distance and angle Jarak dan sudut - + Flip direction Flip direction - + Size Ukuran - + Use All Edges Use All Edges - + Size 2 Size 2 - + Angle Sudut - - - - - There must be at least one item - There must be at least one item - - - - Selection error - Kesalahan seleksi - - - - At least one item must be kept. - At least one item must be kept. + + Empty chamfer created ! + + Empty chamfer created ! + @@ -1627,93 +1674,79 @@ klik lagi untuk mengakhiri seleksi Bentuk - - - + Click button to enter selection mode, click again to end selection Klik tombol untuk masuk model seleksi, klik lagi untuk mengakhiri seleksi - - Add face - Tambahkan wajah + + Select + Memilih - - Remove face - Hapus wajah - - - + - select an item to highlight it - double-click on an item to see the drafts - select an item to highlight it - double-click on an item to see the drafts - + Draft angle Draf sudut - + Neutral plane Pesawat netral - + Pull direction Tarik arah - + Reverse pull direction Reverse pull direction - - - - - There must be at least one item - There must be at least one item - - - - Selection error - Kesalahan seleksi - - - - At least one item must be kept. - At least one item must be kept. + + Empty draft created ! + + Empty draft created ! + PartDesignGui::TaskDressUpParameters - + + Preview + Pratinjau + + + + Select + Memilih + + + Add all edges Add all edges - + Adds all edges to the list box (active only when in add selection mode). Adds all edges to the list box (active only when in add selection mode). - + Remove Menghapus - - - - There must be at least one item - There must be at least one item - PartDesignGui::TaskExtrudeParameters @@ -1856,58 +1889,40 @@ klik lagi untuk mengakhiri seleksi Bentuk - - - + Click button to enter selection mode, click again to end selection Klik tombol untuk masuk model seleksi, klik lagi untuk mengakhiri seleksi - - Add - Menambahkan + + Select + Memilih - - Remove - Menghapus - - - + - select an item to highlight it - double-click on an item to see the fillets - select an item to highlight it - double-click on an item to see the fillets - + Radius: Radius: - + Use All Edges Use All Edges - - - - - There must be at least one item - There must be at least one item - - - - Selection error - Kesalahan seleksi - - - - At least one item must be kept. - At least one item must be kept. + + Empty fillet created ! + + Empty fillet created ! + @@ -2166,12 +2181,12 @@ klik lagi untuk mengakhiri seleksi Perbarui tampilan - + Remove Menghapus - + Error Kesalahan @@ -2315,52 +2330,52 @@ klik lagi untuk mengakhiri seleksi Perbarui tampilan - + Remove Menghapus - + Edit Edit - + Delete Menghapus - + Add mirrored transformation Tambahkan transformasi cermin - + Add linear pattern Tambahkan pola linier - + Add polar pattern Tambahkan pola polar - + Add scaled transformation Tambahkan transformasi skala - + Move up Pindah ke atas - + Move down Pindah ke bawah - + Right-click to add Klik kanan untuk menambahkan @@ -2651,12 +2666,12 @@ measured along the specified direction Z - + Section orientation Orientasi bagian - + Remove Menghapus @@ -2725,13 +2740,13 @@ measured along the specified direction Menghapus - - + + Input error Input error - + No active body No active body @@ -2774,12 +2789,12 @@ measured along the specified direction List can be reordered by dragging - + Section transformation Transformasi bagian - + Remove Menghapus @@ -2880,12 +2895,12 @@ measured along the specified direction Perbarui tampilan - + Remove Menghapus - + Error Kesalahan @@ -2893,7 +2908,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Attachment @@ -2912,19 +2927,19 @@ measured along the specified direction - + Base X axis Sumbu X dasar - + Base Y axis Sumbu y dasar - + Base Z axis Sumbu dasar z @@ -2940,7 +2955,7 @@ measured along the specified direction - + Select reference... Select reference... @@ -3062,94 +3077,76 @@ measured along the specified direction Bentuk - - - + Click button to enter selection mode, click again to end selection Klik tombol untuk masuk model seleksi, klik lagi untuk mengakhiri seleksi - - Add face - Tambahkan wajah + + Select + Memilih - - Remove face - Hapus wajah - - - + - select an item to highlight it - double-click on an item to see the features - select an item to highlight it - double-click on an item to see the features - + Thickness Thickness - + Mode Mode - + Skin Kulit - + Pipe Pipa - + Recto Verso Recto Verso - + Join Type Bergabunglah dengan Jenis - + Arc Busur - - + + Intersection Persimpangan - + Make thickness inwards Buat ketebalan ke dalam - - - - - There must be at least one item - There must be at least one item - - - - Selection error - Kesalahan seleksi - - - - At least one item must be kept. - At least one item must be kept. + + Empty thickness created ! + + Empty thickness created ! + @@ -3412,12 +3409,12 @@ klik lagi untuk mengakhiri seleksi PartDesign_MoveFeature - + Select body Pilih tubuh - + Select a body from the list Pilih badan dari daftar @@ -3425,27 +3422,27 @@ klik lagi untuk mengakhiri seleksi PartDesign_MoveFeatureInTree - + Select feature Pilih fitur - + Select a feature from the list Pilih satu fitur dari daftar - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3520,28 +3517,28 @@ klik lagi untuk mengakhiri seleksi Silakan membuat pesawat terlebih dahulu atau pilih muka untuk membuat sketsa - - + + + - - - + + A dialog is already open in the task panel A dialog is already open in the task panel - - + + + - - - + + Do you want to close this dialog? Do you want to close this dialog? @@ -3576,18 +3573,11 @@ klik lagi untuk mengakhiri seleksi Tidak ada sketsa yang tersedia dalam dokumen - - Wrong selection Pilihan salah - - - Select an edge, face, or body. - Select an edge, face, or body. - Select an edge, face, or body from a single body. @@ -3595,7 +3585,7 @@ klik lagi untuk mengakhiri seleksi - + Selection is not in Active Body Seleksi tidak di Active Body @@ -3620,22 +3610,17 @@ klik lagi untuk mengakhiri seleksi Bentuk bagian yang dipilih kosong - - not possible on selected faces/edges. - tidak mungkin pada wajah / tepi yang dipilih. - - - + No valid features in this document Tidak ada fitur yang valid dalam dokumen ini - + Please create a feature first. Please create a feature first. - + Please select only one feature in an active body. Please select only one feature in an active body. @@ -3711,93 +3696,98 @@ Hal ini dapat menyebabkan hasil yang tidak diharapkan. Tubuh mungkin tidak hanya berdasarkan satu fitur. - + + Body + Body + + + Nothing to migrate Tidak ada yang bisa dimigrasikan - + No PartDesign features found that don't belong to a body. Nothing to migrate. No PartDesign features found that don't belong to a body. Nothing to migrate. - + Sketch plane cannot be migrated Pesawat sketsa tidak bisa dimigrasikan - + Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. Harap edit '%1' dan definisikan ulang untuk menggunakan bidang Base atau Datum sebagai bidang sketsa. - - - - + + + + Selection error Kesalahan seleksi - + Select exactly one PartDesign feature or a body. Pilih salah satu fitur PartDesign atau body. - + Couldn't determine a body for the selected feature '%s'. Tidak dapat menentukan tubuh untuk fitur yang dipilih '%s'. - + Only a solid feature can be the tip of a body. Hanya fitur solid yang bisa menjadi ujung bodi. - - - + + + Features cannot be moved Fitur tidak bisa digerakkan - + Some of the selected features have dependencies in the source body Beberapa fitur yang dipilih memiliki ketergantungan di badan sumber - + Only features of a single source Body can be moved Hanya fitur dari satu sumber Body yang bisa digerakkan - + There are no other bodies to move to Tidak ada badan lain yang bisa pindah - + Impossible to move the base feature of a body. Mustahil menggerakkan fitur dasar bodi. - + Select one or more features from the same body. Pilih satu atau lebih fitur dari bodi yang sama. - + Beginning of the body Awal tubuh - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3816,14 +3806,14 @@ Hal ini dapat menyebabkan hasil yang tidak diharapkan. Tidak mungkin membuat fitur subtraktif tanpa fitur dasar yang tersedia - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3847,41 +3837,41 @@ If you have a legacy document with PartDesign objects without Body, use the migr If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - + Active Body Required Badan Aktif Diperlukan - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Untuk membuat objek PartDesign baru, harus ada objek Body yang aktif dalam dokumen. Tolong buat satu aktif (klik dua kali) atau buat Body baru. - + Feature is not in a body Fitur tidak ada dalam tubuh - + In order to use this feature it needs to belong to a body object in the document. Untuk menggunakan fitur ini, benda tersebut harus termasuk dalam objek tubuh dalam dokumen. - + Feature is not in a part Fitur tidak di bagian - + In order to use this feature it needs to belong to a part object in the document. Untuk menggunakan fitur ini, perlu disertakan bagian objek dalam dokumen. - + + - Edit %1 Edit %1 @@ -4461,20 +4451,20 @@ Only available for holes without thread - + Standard Standar - - + + Close Dekat - + Wide Wide @@ -4538,7 +4528,7 @@ Only available for holes without thread - + Type Jenis @@ -4558,49 +4548,56 @@ Only available for holes without thread Custom values - + + For countersinks this is the depth of +the screw's top below the surface + For countersinks this is the depth of +the screw's top below the surface + + + Countersink angle Sudut Countersink - + <b>Drill point</b> <b> Titik bor </ b> - + Flat Datar - + Angled Miring - + The size of the drill point will be taken into account for the depth of blind holes The size of the drill point will be taken into account for the depth of blind holes - + Take into account for depth Take into account for depth - + <b>Misc</b> <b>Misc</ b> - + Tapered Meruncing - + Taper angle for the hole 90 degree: straight hole under 90: smaller hole radius at the bottom @@ -4611,22 +4608,22 @@ under 90: smaller hole radius at the bottom over 90: larger hole radius at the bottom - + Reverses the hole direction Reverses the hole direction - + Reversed Reversed - + Normal Normal - + Loose Loose @@ -4722,4 +4719,88 @@ over 90: larger hole radius at the bottom Part Design Modeling + + PartDesign_InvoluteGear + + + Involute gear... + Involute gear... + + + + Creates or edit the involute gear definition. + Creates or edit the involute gear definition. + + + + PartDesign_Sprocket + + + Sprocket... + Sprocket... + + + + Creates or edit the sprocket definition. + Creates or edit the sprocket definition. + + + + WizardShaftTable + + + Length [mm] + Length [mm] + + + + Diameter [mm] + Diameter [mm] + + + + Inner diameter [mm] + Inner diameter [mm] + + + + Constraint type + Constraint type + + + + Start edge type + Start edge type + + + + Start edge size + Start edge size + + + + End edge type + End edge type + + + + End edge size + End edge size + + + + WizardShaft + + + + Shaft design wizard... + Shaft design wizard... + + + + + Start the shaft design wizard + Start the shaft design wizard + + diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index cdbd83f52c..a7d4cfd61b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -4756,27 +4756,27 @@ over 90: larger hole radius at the bottom Constraint type - Constraint type + Tipo di vincolo Start edge type - Start edge type + Tipo di bordo iniziale Start edge size - Start edge size + Dimensione bordo iniziale End edge type - End edge type + Tipo di bordo finale End edge size - End edge size + Dimensione bordo finale diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index cb2cc7b375..5c8a4e7529 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -82,47 +82,47 @@ so that self intersection is avoided. Number of gear teeth - Number of gear teeth + 歯数 Modules of the gear - Modules of the gear + 歯車のモジュール Pressure angle of gear teeth - Pressure angle of gear teeth + 歯の圧力角 True=2 curves with each 3 control points False=1 curve with 4 control points. - True=2 curves with each 3 control points False=1 curve with 4 control points. + True=それぞれ3つの制御点を持つ2曲線 False=4つの制御点を持つ1曲線 True=external Gear False=internal Gear - True=external Gear False=internal Gear + True=外歯車 False=内歯車 The height of the tooth from the pitch circle up to its tip, normalized by the module. - The height of the tooth from the pitch circle up to its tip, normalized by the module. + モジュールによって正規化された、ピッチ円から歯先までの歯の高さ The height of the tooth from the pitch circle down to its root, normalized by the module. - The height of the tooth from the pitch circle down to its root, normalized by the module. + モジュールによって正規化された、ピッチ円から歯元までの歯の高さ The radius of the fillet at the root of the tooth, normalized by the module. - The radius of the fillet at the root of the tooth, normalized by the module. + モジュールによって正規化された、歯の根元のフィレットの半径 The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + モジュールによって正規化された、参照プロファイルを外方向にシフトする距離 @@ -1062,22 +1062,22 @@ so that self intersection is avoided. Addendum Coefficient - Addendum Coefficient + 歯先のたけ係数 Dedendum Coefficient - Dedendum Coefficient + 歯元のたけ係数 Root Fillet Coefficient - Root Fillet Coefficient + ルートフィレット係数 Profile Shift Coefficient - Profile Shift Coefficient + プロファイルシフト係数 @@ -1611,7 +1611,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + 空の面取りが作成されました! @@ -1712,7 +1712,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + 空の抜き勾配が作成されました! @@ -1917,7 +1917,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + 空のフィレットが作成されました! @@ -2086,7 +2086,7 @@ click again to end selection Counterdrill - Counterdrill + 座ぐり @@ -3140,7 +3140,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! + 空の厚みが作成されました! @@ -4540,8 +4540,7 @@ Only available for holes without thread For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + 皿穴の場合、面の下のねじ上部の深さです。 @@ -4717,7 +4716,7 @@ over 90: larger hole radius at the bottom Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + インボリュート歯車定義の作成、または編集 @@ -4730,7 +4729,7 @@ over 90: larger hole radius at the bottom Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + スプロケット定義の作成、または編集 @@ -4738,42 +4737,42 @@ over 90: larger hole radius at the bottom Length [mm] - Length [mm] + 長さ [mm] Diameter [mm] - Diameter [mm] + 直径 [mm] Inner diameter [mm] - Inner diameter [mm] + 内径 [mm] Constraint type - Constraint type + 拘束タイプ Start edge type - Start edge type + エッジ始端タイプ Start edge size - Start edge size + エッジ始端サイズ End edge type - End edge type + エッジ終端タイプ End edge size - End edge size + エッジ終端サイズ @@ -4782,13 +4781,13 @@ over 90: larger hole radius at the bottom Shaft design wizard... - Shaft design wizard... + シャフト設計ウィザード... Start the shaft design wizard - Start the shaft design wizard + シャフト設計ウィザードを開始 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts index ad730729f2..50f3e1e888 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts @@ -92,17 +92,17 @@ so that self intersection is avoided. Pressure angle of gear teeth - Pressure angle of gear teeth + გადაცემის კბილანების წნევის კუთხე True=2 curves with each 3 control points False=1 curve with 4 control points. - True=2 curves with each 3 control points False=1 curve with 4 control points. + True=2 მრუდი თითოეული 3 საკონტროლო წერტილით False=1 მრუდი with 4 საკონტროლო წერტილით. True=external Gear False=internal Gear - True=external Gear False=internal Gear + True=გარე კბილანა False=შიდა კბილანა @@ -122,7 +122,7 @@ so that self intersection is avoided. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + დაშორება, რომლითაც მიმართული პროფილი გარეთ გაიწევა. ნორმალიზდება მოდულის მიერ. @@ -1077,7 +1077,7 @@ so that self intersection is avoided. Profile Shift Coefficient - Profile Shift Coefficient + პროფილის წანაცვლების კოეფიციენტი @@ -1614,7 +1614,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + შექმნილია ცარიელი კუთხის ნაზოლი ! @@ -1715,7 +1715,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + შექმნილია ცარიელი მონახაზი ! @@ -1920,7 +1920,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + შექმნილია ცარიელი მომრგვალებული ნაზოლი ! @@ -3144,7 +3144,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! + შექმნილია ცარიელი სისქე ! @@ -4550,8 +4550,8 @@ Only available for holes without thread For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + კონუსური საღრუვებისთვის ეს სიღრმეა +ხრახნის თავიდან ზედაპირის ქვეშ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 47bead31bb..caf3fb5f75 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -1714,7 +1714,7 @@ klik nogmaals om de selectie te beëindigen Empty draft created ! - Empty draft created ! + Leeg concept gemaakt! diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index 1139b63605..9749d7a6ce 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -125,7 +125,7 @@ wartość Fałsz = uzębienie wewnętrzne The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Odległość, o jaką profil odniesienia jest przesuwany na zewnątrz, znormalizowana przez moduł. @@ -1080,7 +1080,7 @@ wartość Fałsz = uzębienie wewnętrzne Profile Shift Coefficient - Profile Shift Coefficient + Współczynnik przesunięcia profilu @@ -1615,7 +1615,7 @@ kliknij ponownie, aby zakończyć wybór Empty chamfer created ! - Empty chamfer created ! + Utworzono pustą fazę ! @@ -1716,7 +1716,7 @@ kliknij ponownie, aby zakończyć wybór Empty draft created ! - Empty draft created ! + Utworzono puste pochylenie ! @@ -1921,7 +1921,7 @@ kliknij ponownie, aby zakończyć wybór Empty fillet created ! - Empty fillet created ! + Utworzono puste zaokrąglenie ! @@ -3145,7 +3145,7 @@ kliknij ponownie, aby zakończyć wybór Empty thickness created ! - Empty thickness created ! + Utworzono pustą grubość ! @@ -4551,8 +4551,8 @@ Dostępne tylko dla otworów bez gwintu For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + W przypadku pogłębienia stożkowego jest to głębokość +wierzchołka śruby poniżej powierzchni diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 845e0e3c12..dbb03247dc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -6,124 +6,124 @@ The center point of the helix' start; derived from the reference axis. - The center point of the helix' start; derived from the reference axis. + Punctul central al helixului, derivat din axa de referință. The helix' direction; derived from the reference axis. - The helix' direction; derived from the reference axis. + Direcția helix; derivată din axa de referință. The reference axis of the helix. - The reference axis of the helix. + Axa de referință a helixului. The helix input mode specifies which properties are set by the user. Dependent properties are then calculated. - The helix input mode specifies which properties are set by the user. -Dependent properties are then calculated. + Modul de intrare helix specifică ce proprietăți sunt setate de către utilizator. +Proprietățile dependente sunt apoi calculate. The axial distance between two turns. - The axial distance between two turns. + Distanţa axială dintre două rânduri. The height of the helix' path, not accounting for the extent of the profile. - The height of the helix' path, not accounting for the extent of the profile. + Înălțimea căii helixului, care nu ține seama de amploarea profilului. The number of turns in the helix. - The number of turns in the helix. + Numărul de rotaţii în helix. The angle of the cone that forms a hull around the helix. Non-zero values turn the helix into a conical spiral. Positive values make the radius grow, nevatige shrink. - The angle of the cone that forms a hull around the helix. -Non-zero values turn the helix into a conical spiral. -Positive values make the radius grow, nevatige shrink. + Unghiul conului care formează o carenă în jurul helixului. +Valorile non-zero transformă helixul într-o spirală conică. +Valorile pozitive fac ca raza să crească, să se micşoreze nevatiga. The growth of the helix' radius per turn. Non-zero values turn the helix into a conical spiral. - The growth of the helix' radius per turn. -Non-zero values turn the helix into a conical spiral. + Creșterea razei helix pe rând. +Valorile non-zero transformă helixul într-o spirală conică. Sets the turning direction to left handed, i.e. counter-clockwise when moving along its axis. - Sets the turning direction to left handed, -i.e. counter-clockwise when moving along its axis. + Setează direcția de întoarcere la stânga, +adică, în sens invers acelor de ceasornic când se mișcă de-a lungul axei sale. Determines whether the helix points in the opposite direction of the axis. - Determines whether the helix points in the opposite direction of the axis. + Determină dacă helixul indică în direcţia opusă a axei. If set, the result will be the intersection of the profile and the preexisting body. - If set, the result will be the intersection of the profile and the preexisting body. + Dacă este setat, rezultatul va fi intersecția profilului și a organismului preexistent. If false, the tool will propose an initial value for the pitch based on the profile bounding box, so that self intersection is avoided. - If false, the tool will propose an initial value for the pitch based on the profile bounding box, -so that self intersection is avoided. + Dacă este fals, instrumentul va propune o valoare inițială pentru pas pe baza casetei de încadrare a profilului, +astfel încât intersecția de sine să fie evitată. Number of gear teeth - Number of gear teeth + Număr de dinţi Modules of the gear - Modules of the gear + Module de viteze Pressure angle of gear teeth - Pressure angle of gear teeth + Unghiul de presiune al dinților de viteză True=2 curves with each 3 control points False=1 curve with 4 control points. - True=2 curves with each 3 control points False=1 curve with 4 control points. + Curbe Adevărate=2 cu fiecare 3 puncte de control False=1 curbă cu 4 puncte de control. True=external Gear False=internal Gear - True=external Gear False=internal Gear + Adevărat=Fals de echipament extern=echipament intern The height of the tooth from the pitch circle up to its tip, normalized by the module. - The height of the tooth from the pitch circle up to its tip, normalized by the module. + Înălțimea dintelui de la cercul de pas până la vârful lui, normalizată de către modul. The height of the tooth from the pitch circle down to its root, normalized by the module. - The height of the tooth from the pitch circle down to its root, normalized by the module. + Înălțimea dintelui de la cercul de pas până la vârful lui, normalizată de către modul. The radius of the fillet at the root of the tooth, normalized by the module. - The radius of the fillet at the root of the tooth, normalized by the module. + Raza fileului de la rădăcina dintelui, normalizată de modul. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Distanța cu care profilul de referință este transferat în exterior, normalizată prin modul. @@ -136,12 +136,12 @@ so that self intersection is avoided. Additive helix - Additive helix + Pană aditivă Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + Glisați o schiță selectată de-a lungul unui helix @@ -521,7 +521,7 @@ Creati noi coordonate in sistemul local Create a new sketch - Create a new sketch + Creați o nouă schiță @@ -679,7 +679,7 @@ Creati noi coordonate in sistemul local Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Creaţi un sub-obiect(e) în formă de legătură @@ -692,12 +692,12 @@ Creati noi coordonate in sistemul local Subtractive helix - Subtractive helix + Cutie substractivă Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + Baleiați o schiță selecționată de-a lungul unei traiectorii sau prin alte profile și extrageți-o din corp @@ -867,79 +867,79 @@ Creati noi coordonate in sistemul local Edit ShapeBinder - Edit ShapeBinder + Editaţi forma de conexiune Create ShapeBinder - Create ShapeBinder + Editaţi forma de conexiune Create SubShapeBinder - Create SubShapeBinder + Create SubShapeBinder Create Clone - Create Clone + Creare clonă Make copy - Make copy + Fă o copie Create a Sketch on Face - Create a Sketch on Face + Crează o schiță pe față Create a new Sketch - Create a new Sketch + Creează o schiță nouă Convert to MultiTransform feature - Convert to MultiTransform feature + Convertește la funcția de transformă multiplă Create Boolean - Create Boolean + Create Boolean Add a Body - Add a Body + Adaugă un corp Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Migrați caracteristicile de design ale pieselor moștenite la corpuri Move tip to selected feature - Move tip to selected feature + Mută bacșișul la caracteristica selectată Duplicate a PartDesign object - Duplicate a PartDesign object + Duplică un obiect PartDesign Move an object - Move an object + Mută un obiect Move an object inside tree - Move an object inside tree + Mută un obiect în interiorul arborelui @@ -949,7 +949,7 @@ Creati noi coordonate in sistemul local Make LinearPattern - Make LinearPattern + Fă LinearPattern @@ -1033,7 +1033,7 @@ Creati noi coordonate in sistemul local Module: - Module: + Module: @@ -1065,22 +1065,22 @@ Creati noi coordonate in sistemul local Addendum Coefficient - Addendum Coefficient + Coeficientul Addendum Dedendum Coefficient - Dedendum Coefficient + Coeficientul Dedendum Root Fillet Coefficient - Root Fillet Coefficient + Coeficient Fillet Root Profile Shift Coefficient - Profile Shift Coefficient + Coeficient de schimbare a profilului @@ -1091,10 +1091,10 @@ Creati noi coordonate in sistemul local - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Funcția solicitată nu poate fi creată. Motivul poate fi: + - Corpul activ nu conține o formă de bază, astfel încât să nu existe + material care să fie eliminat; + - schița selectată nu aparține Organismului activ. @@ -1105,10 +1105,10 @@ Creati noi coordonate in sistemul local - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Funcția solicitată nu poate fi creată. Motivul poate fi: + - Corpul activ nu conține o formă de bază, astfel încât să nu existe + material care să fie eliminat; + - schița selectată nu aparține Organismului activ. @@ -1119,10 +1119,10 @@ Creati noi coordonate in sistemul local - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + Funcția solicitată nu poate fi creată. Motivul poate fi: + - Corpul activ nu conține o formă de bază, astfel încât să nu existe + material care să fie eliminat; + - schița selectată nu aparține Organismului activ. @@ -1137,19 +1137,19 @@ Creati noi coordonate in sistemul local To create a new PartDesign object, there must be an active Body object in the document. Please select a body from below, or create a new body. - To create a new PartDesign object, there must be an active Body object in the document. + Pentru a crea un nou obiect PartDesign, trebuie să existe un corp activ în document. -Please select a body from below, or create a new body. +Vă rugăm să selectați un corp din partea de mai jos sau să creați un nou corp. Create new body - Create new body + Crează un nou corp Please select - Please select + Vă rugăm selectaţi @@ -1193,30 +1193,30 @@ Please select a body from below, or create a new body. Angle in first direction: - Angle in first direction: + Unghiul în prima direcţie: Angle in first direction - Angle in first direction + Unghiul în prima direcţie Angle in second direction: - Angle in second direction: + Unghiul în a doua direcţie: Angle in second direction - Angle in second direction + Unghiul în a doua direcţie Rotation angle: - Rotation angle: + Unghiul de rotație: @@ -1252,12 +1252,12 @@ Please select a body from below, or create a new body. Radius in local z-direction - Radius in local z-direction + Raza în direcția Z locală Radius in local x-direction - Radius in local x-direction + Raza în direcția X locală @@ -1268,8 +1268,8 @@ Please select a body from below, or create a new body. Radius in local y-direction If zero, it is equal to Radius2 - Radius in local y-direction -If zero, it is equal to Radius2 + Raza în direcţia y locală +Dacă zero, este egală cu Radius2 @@ -1280,12 +1280,12 @@ If zero, it is equal to Radius2 Radius in local xy-plane - Radius in local xy-plane + Raza în planul xy-plan local Radius in local xz-plane - Radius in local xz-plane + Raza în planul xy-plan local @@ -1428,7 +1428,7 @@ If zero, it is equal to Radius2 You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. - You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. + Aţi selectat geometrii care nu fac parte din corpul activ. Vă rugăm să definiți cum să gestionați aceste selecții. Dacă nu doriți aceste referințe, anulați comanda. @@ -1507,34 +1507,34 @@ If zero, it is equal to Radius2 Cone radii are equal - Cone radii are equal + Raza Cone egală The radii for cones must not be equal! - The radii for cones must not be equal! + Raza pentru conuri nu trebuie să fie egală! Invalid wedge parameters - Invalid wedge parameters + Parametri de perete invalizi X min must not be equal to X max! - X min must not be equal to X max! + X min nu trebuie să fie egal cu X max! Y min must not be equal to Y max! - Y min must not be equal to Y max! + Y min nu trebuie să fie egal cu Y max! Z min must not be equal to Z max! - Z min must not be equal to Z max! + Z min nu trebuie să fie egal cu Z max! @@ -1553,8 +1553,8 @@ If zero, it is equal to Radius2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Faceți clic pe buton pentru a intra în modul de selecție, +faceți clic din nou pentru a încheia selecția @@ -1565,8 +1565,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - selectează un element pentru a-l evidenția +- dublu-click pe un element pentru a vedea camerele @@ -1576,22 +1576,22 @@ click again to end selection Equal distance - Equal distance + Distanță egală Two distances - Two distances + Două distanţe Distance and angle - Distance and angle + Distanță și unghi Flip direction - Flip direction + Întoarce direcția @@ -1601,12 +1601,12 @@ click again to end selection Use All Edges - Use All Edges + Folosește toate marginile Size 2 - Size 2 + Dimensiune 2 @@ -1617,7 +1617,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + Camferul gol a fost creat! @@ -1679,8 +1679,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Faceți clic pe buton pentru a intra în modul de selecție, +faceți clic din nou pentru a încheia selecția @@ -1691,8 +1691,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the drafts - - select an item to highlight it -- double-click on an item to see the drafts + - selectează un element pentru a-l evidenția +- dublu-click pe un element pentru a vedea ciorna @@ -1718,7 +1718,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + Gol ciornă creată! @@ -1737,12 +1737,12 @@ click again to end selection Add all edges - Add all edges + Adaugă toate marginile Adds all edges to the list box (active only when in add selection mode). - Adds all edges to the list box (active only when in add selection mode). + Adauga toate marginile in caseta de lista (activ doar cand este in modul de selectie). @@ -1766,12 +1766,12 @@ click again to end selection Sketch normal - Sketch normal + Schiță normală Face normal - Face normal + Faţă normală @@ -1782,12 +1782,12 @@ click again to end selection Custom direction - Custom direction + Direcție personalizată Click on a face in the model - Click on a face in the model + Faceți clic pe o față din model @@ -1894,8 +1894,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Faceți clic pe buton pentru a intra în modul de selecție, +faceți clic din nou pentru a încheia selecția @@ -1906,8 +1906,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the fillets - - select an item to highlight it -- double-click on an item to see the fillets + - selectează un element pentru a-l evidenția +- dublu-click pe un produs pentru a vedea fileurile @@ -1917,13 +1917,13 @@ click again to end selection Use All Edges - Use All Edges + Folosește toate marginile Empty fillet created ! - Empty fillet created ! + Fisier gol creat! @@ -1937,7 +1937,7 @@ click again to end selection Status: - Status: + Stare: @@ -1994,27 +1994,27 @@ click again to end selection Mode: - Mode: + Mod: Pitch-Height-Angle - Pitch-Height-Angle + Pas-Înălțime-Unghi Pitch-Turns-Angle - Pitch-Turns-Angle + Înălțime-întoarcere-unghi Height-Turns-Angle - Height-Turns-Angle + Înălțime-întoarcere-unghi Height-Turns-Growth - Height-Turns-Growth + Înălțime-Intoarcere-creștere @@ -2029,22 +2029,22 @@ click again to end selection Turns: - Turns: + Întoarcere: Cone angle: - Cone angle: + Unghiul de con: Radial growth: - Radial growth: + Creştere radioactivă: Left handed - Left handed + mâna stângă @@ -2054,7 +2054,7 @@ click again to end selection Remove outside of profile - Remove outside of profile + Elimină din afara profilului @@ -2064,7 +2064,7 @@ click again to end selection Helix parameters - Helix parameters + Parametrii Helix @@ -2074,7 +2074,7 @@ click again to end selection Error: unsupported mode - Error: unsupported mode + Eroare: mod neacceptat @@ -2092,7 +2092,7 @@ click again to end selection Counterdrill - Counterdrill + Contraforaj @@ -2107,7 +2107,7 @@ click again to end selection ISO metric regular profile - ISO metric regular profile + Profil regulat ISO @@ -2150,7 +2150,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -2233,7 +2233,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -2271,7 +2271,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -2319,7 +2319,7 @@ click again to end selection List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -2392,12 +2392,12 @@ click again to end selection Offset from face at which pad will end - Offset from face at which pad will end + Compensare din față la care panoul se va termina Reverses pad direction - Reverses pad direction + Inversează direcția tastaturii @@ -2450,7 +2450,7 @@ click again to end selection Offset to face - Offset to face + Compensare pe față @@ -2460,19 +2460,19 @@ click again to end selection Direction/edge: - Direction/edge: + Direcție/margine: Set a direction or select an edge from the model as reference - Set a direction or select an edge -from the model as reference + Setați o direcție sau selectați o margine +din model ca referință Sketch normal - Sketch normal + Schiță normală @@ -2482,19 +2482,19 @@ from the model as reference Custom direction - Custom direction + Direcție personalizată Show direction - Show direction + Arată direcția Use custom vector for pad direction, otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction, otherwise -the sketch plane's normal vector will be used + Utilizaţi vector personalizat pentru direcţia tastaturii, altfel +vectorul normal al planului va fi folosit @@ -2504,7 +2504,7 @@ the sketch plane's normal vector will be used x-component of direction vector - x-component of direction vector + componenta x a vectorului de direcție @@ -2514,7 +2514,7 @@ the sketch plane's normal vector will be used y-component of direction vector - y-component of direction vector + componentă y a vectorului de direcție @@ -2524,24 +2524,24 @@ the sketch plane's normal vector will be used z-component of direction vector - z-component of direction vector + componenta z a vectorului de direcție If unchecked, the length will be measured along the specified direction - If unchecked, the length will be -measured along the specified direction + Dacă nu bifați, lungimea va fi +măsurată de-a lungul direcției specificate Length along sketch normal - Length along sketch normal + Lungimea normală de-a lungul schiței Applies length symmetrically to sketch plane - Applies length symmetrically to sketch plane + Aplică lungimea simetric planului schiţei @@ -2557,12 +2557,12 @@ measured along the specified direction Angle to taper the extrusion - Angle to taper the extrusion + Unghiul pentru a lipi extruda Taper angle - Taper angle + Unghiul de căptușeală @@ -2572,12 +2572,12 @@ measured along the specified direction 2nd taper angle - 2nd taper angle + Al doilea unghi de tapet Select face - Select face + Selectați fața @@ -2719,7 +2719,7 @@ measured along the specified direction Path to sweep along - Path to sweep along + Calea de parcurs @@ -2750,7 +2750,7 @@ measured along the specified direction No active body - No active body + Nici un corp activ @@ -2788,7 +2788,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -2811,12 +2811,12 @@ measured along the specified direction Offset from face at which pocket will end - Offset from face at which pocket will end + Compensare din față în care buzunarul se va termina Reverses pocket direction - Reverses pocket direction + Inversează direcția buzunarului @@ -2864,7 +2864,7 @@ measured along the specified direction List can be reordered by dragging - List can be reordered by dragging + Lista poate fi reordonată prin tragere @@ -3082,8 +3082,8 @@ measured along the specified direction Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Faceți clic pe buton pentru a intra în modul de selecție, +faceți clic din nou pentru a încheia selecția @@ -3094,8 +3094,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the features - - select an item to highlight it -- double-click on an item to see the features + - selectează un element pentru a-l evidenția +- dublu-click pe un articol pentru a vedea caracteristicile @@ -3147,8 +3147,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! - + S-a creat grosimea goala ! @@ -3232,7 +3231,7 @@ click again to end selection Chamfer parameters - Chamfer parameters + Parametri de camp @@ -3240,22 +3239,22 @@ click again to end selection Datum Plane parameters - Datum Plane parameters + Parametrii planului de date Datum Line parameters - Datum Line parameters + Parametri linie de date Datum Point parameters - Datum Point parameters + Parametrii punctului de referință Local Coordinate System parameters - Local Coordinate System parameters + Parametrii de sistem de coordonate locale @@ -3263,7 +3262,7 @@ click again to end selection Draft parameters - Draft parameters + Parametri proiect @@ -3271,7 +3270,7 @@ click again to end selection Fillet parameters - Fillet parameters + Parametrii de umplere @@ -3279,7 +3278,7 @@ click again to end selection LinearPattern parameters - LinearPattern parameters + Parametri LinearPattern @@ -3287,7 +3286,7 @@ click again to end selection MultiTransform parameters - MultiTransform parameters + Parametri de transformare multiplă @@ -3295,7 +3294,7 @@ click again to end selection PolarPattern parameters - PolarPattern parameters + Parametri LinearPattern @@ -3303,7 +3302,7 @@ click again to end selection Scaled parameters - Scaled parameters + Parametrii scalați @@ -3311,7 +3310,7 @@ click again to end selection Thickness parameters - Thickness parameters + Parametrii de grosime @@ -3319,7 +3318,7 @@ click again to end selection Mirrored parameters - Mirrored parameters + Parametri oglindiți @@ -3327,12 +3326,12 @@ click again to end selection Create an additive box by its width, height, and length - Create an additive box by its width, height, and length + Creaţi un casetă aditiv definit prin lăţimea, înălţimea şi lungimea sa Create an additive cylinder by its radius, height, and angle - Create an additive cylinder by its radius, height, and angle + Creaţi un cilindru aditiv definit prin rază, înălţime şi unghi @@ -3436,17 +3435,17 @@ click again to end selection Move tip - Move tip + Mutați vârful The moved feature appears after the currently set tip. - The moved feature appears after the currently set tip. + Funcția mutată apare după sfatul setat în prezent. Do you want the last feature to be the new tip? - Do you want the last feature to be the new tip? + Doriți ca ultima caracteristică să fie noul sfaturi? @@ -3476,7 +3475,7 @@ click again to end selection Sub-Shape Binder - Sub-Shape Binder + Sub-Shape Binder @@ -3547,22 +3546,22 @@ click again to end selection Cannot use this command as there is no solid to subtract from. - Cannot use this command as there is no solid to subtract from. + Nu se poate folosi această comandă deoarece nu există nici un solid din care să se scade. Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + Asigurați-vă că corpul conține o caracteristică înainte de a încerca o comandă substractivă. Cannot use selected object. Selected object must belong to the active body - Cannot use selected object. Selected object must belong to the active body + Nu se poate utiliza obiectul selectat. Obiectul selectat trebuie să aparțină corpului activ Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. - Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. + Luați în considerare utilizarea unui ShapeBinder sau a unei caracteristici de bază pentru a face referire la geometria externă a unui corp. @@ -3583,7 +3582,7 @@ click again to end selection Select an edge, face, or body from a single body. - Select an edge, face, or body from a single body. + Selectaţi o margine, o faţă sau un corp de pe un singur corp. @@ -3594,7 +3593,7 @@ click again to end selection Select an edge, face, or body from an active body. - Select an edge, face, or body from an active body. + Selectaţi o margine, o faţă sau un corp de la un corp activ. @@ -3619,12 +3618,12 @@ click again to end selection Please create a feature first. - Please create a feature first. + Mai întâi selectați un fișier. Please select only one feature in an active body. - Please select only one feature in an active body. + Vă rugăm să selectaţi un singur fisier într-un corp activ. @@ -3706,7 +3705,7 @@ This may lead to unexpected results. No PartDesign features found that don't belong to a body. Nothing to migrate. - No PartDesign features found that don't belong to a body. Nothing to migrate. + Nu au fost găsite caracteristici PartDesign care nu aparțin unui corp. Nimic de migrat. @@ -3782,14 +3781,14 @@ This may lead to unexpected results. Dependency violation - Dependency violation + Încălcarea dependenței Early feature must not depend on later feature. - Early feature must not depend on later feature. + Funcția inițială nu trebuie să depindă de funcția ulterioară. @@ -3830,9 +3829,7 @@ This may lead to unexpected results. In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. - -If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. + Pentru a utiliza PartDesign aveți nevoie de un obiect Body activ în document. Vă rugăm să activați unul (dublu clic) sau să creați unul. @@ -3970,12 +3967,12 @@ This feature is broken and can't be edited. Synchronize - Synchronize + Sincronizare Select bound object - Select bound object + Selectaţi obiectul legat @@ -4017,9 +4014,9 @@ This feature is broken and can't be edited. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design -> Migrate'. + Notă: Dacă alegeți să migrați, nu veți putea edita fișierul cu o versiune FreeCAD mai veche. +Dacă refuzați să migrați, nu veți putea folosi noile funcții PartDesign, cum ar fi Corpuri și Piese. Ca rezultat, nici nu veți putea folosi piesele dumneavoastră în bancul de lucru de asamblare. +Deși veți putea migra în orice moment mai târziu cu „Part Design -> Migrate”. @@ -4029,7 +4026,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit helix - Edit helix + Editare helix @@ -4037,7 +4034,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket parameter - Sprocket parameter + Parametrii buzunarului @@ -4047,172 +4044,172 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Reference - Sprocket Reference + Referință Sprocket ANSI 25 - ANSI 25 + ANSI 25 ANSI 35 - ANSI 35 + ANSI 35 ANSI 41 - ANSI 41 + ANSI 41 ANSI 40 - ANSI 40 + ANSI 40 ANSI 50 - ANSI 50 + ANSI 50 ANSI 60 - ANSI 60 + ANSI 60 ANSI 80 - ANSI 80 + ANSI 80 ANSI 100 - ANSI 100 + ANSI 100 ANSI 120 - ANSI 120 + ANSI 120 ANSI 140 - ANSI 140 + ANSI 140 ANSI 160 - ANSI 160 + ANSI 160 ANSI 180 - ANSI 180 + ANSI 180 ANSI 200 - ANSI 200 + ANSI 200 ANSI 240 - ANSI 240 + ANSI 240 Bicycle with Derailleur - Bicycle with Derailleur + Deraioare pentru bicicletă Bicycle without Derailleur - Bicycle without Derailleur + Deraioare pentru bicicletă ISO 606 06B - ISO 606 06B + ISO 606 06B ISO 606 08B - ISO 606 08B + ISO 606 06B ISO 606 10B - ISO 606 10B + ISO 606 10B ISO 606 12B - ISO 606 12B + ISO 606 12B ISO 606 16B - ISO 606 16B + ISO 606 16B ISO 606 20B - ISO 606 20B + ISO 606 20B ISO 606 24B - ISO 606 24B + ISO 606 24B Motorcycle 420 - Motorcycle 420 + Motocicletă 420 Motorcycle 425 - Motorcycle 425 + Motocicletă 425 Motorcycle 428 - Motorcycle 428 + Motocicletă 428 Motorcycle 520 - Motorcycle 520 + Motocicletă 520 Motorcycle 525 - Motorcycle 525 + Motocicletă 525 Motorcycle 530 - Motorcycle 530 + Motocicletă 530 Motorcycle 630 - Motorcycle 630 + Motocicletă 630 Chain Pitch: - Chain Pitch: + Bucătărie lanţ: 0 in - 0 in + 0 în Roller Diameter: - Roller Diameter: + Diametru scripete: @@ -4369,7 +4366,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Whether the hole gets a thread - Whether the hole gets a thread + Dacă gaura primește o temă de discuție @@ -4379,19 +4376,19 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Whether the hole gets a modelled thread - Whether the hole gets a modelled thread + Dacă gaura primeşte o temă modelată Model Thread - Model Thread + Discutie model Live update of changes to the thread Note that the calculation can take some time - Live update of changes to the thread -Note that the calculation can take some time + Actualizare live a modificărilor în tema +Reţineţi că calculul poate dura ceva timp @@ -4401,23 +4398,23 @@ Note that the calculation can take some time Customize thread clearance - Customize thread clearance + Particularizare fir Custom Thread - Custom Thread + Discutie personalizată Clearance - Clearance + Îndepărtare Custom Thread clearance value - Custom Thread clearance value + Valoare de eliminare personalizată a discuției @@ -4443,8 +4440,8 @@ Note that the calculation can take some time Hole clearance Only available for holes without thread - Hole clearance -Only available for holes without thread + Clearance-ul fișierului +este disponibil numai pentru găuri fără fir @@ -4463,7 +4460,7 @@ Only available for holes without thread Wide - Wide + Lat @@ -4473,7 +4470,7 @@ Only available for holes without thread Tolerance class for threaded holes according to hole profile - Tolerance class for threaded holes according to hole profile + Clasa de toleranță pentru găurile filetate în funcție de profilul găurilor @@ -4484,7 +4481,7 @@ Only available for holes without thread Hole diameter - Hole diameter + Diametrul găurii @@ -4506,17 +4503,17 @@ Only available for holes without thread Thread Depth - Thread Depth + Adâncimea filetului Hole depth - Hole depth + Adâncimea găurii Tapped (DIN76) - Tapped (DIN76) + Fixat (DIN76) @@ -4532,24 +4529,24 @@ Only available for holes without thread Cut type for screw heads - Cut type for screw heads + Tip de tăiere pentru şuruburi Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' + Bifați pentru a suprascrie valorile predefinite de 'Tip' Custom values - Custom values + Valori personalizate For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Pentru scuturi aceasta este adâncimea de +partea superioară a șurubului sub suprafață @@ -4575,13 +4572,13 @@ the screw's top below the surface The size of the drill point will be taken into account for the depth of blind holes - The size of the drill point will be taken into -account for the depth of blind holes + Dimensiunea punctului de foraj va fi luată în considerare +pentru adâncimea găurilor oarbe Take into account for depth - Take into account for depth + Luați în considerare adâncimea @@ -4599,15 +4596,15 @@ account for the depth of blind holes 90 degree: straight hole under 90: smaller hole radius at the bottom over 90: larger hole radius at the bottom - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom + Unghiul mai taper pentru gaura +90 grade: gaură dreaptă +sub 90: rază mai mică la partea de jos +peste 90: rază mai mare la partea de jos Reverses the hole direction - Reverses the hole direction + Inversează direcția gaurii @@ -4622,7 +4619,7 @@ over 90: larger hole radius at the bottom Loose - Loose + Desprins @@ -4643,37 +4640,37 @@ over 90: larger hole radius at the bottom &Sketch - &Sketch + &Schiță &Part Design - &Part Design + Design piese Create a datum - Create a datum + Create a datum Create an additive feature - Create an additive feature + Creaţi o funcţie aditiv Create a subtractive feature - Create a subtractive feature + Creați o funcție substractivă Apply a pattern - Apply a pattern + Aplică un model Apply a dress-up feature - Apply a dress-up feature + Aplică o opțiune de rotație @@ -4703,7 +4700,7 @@ over 90: larger hole radius at the bottom Toggle 3D - Toggle 3D + Comutați 3D @@ -4726,7 +4723,7 @@ over 90: larger hole radius at the bottom Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + Creează sau editează definiţia uneltelor de schimb. @@ -4739,7 +4736,7 @@ over 90: larger hole radius at the bottom Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Creează sau editează definiţia soclului. @@ -4747,42 +4744,42 @@ over 90: larger hole radius at the bottom Length [mm] - Length [mm] + Lungimea [mm] Diameter [mm] - Diameter [mm] + Diametru [mm] Inner diameter [mm] - Inner diameter [mm] + Diametrul interior [mm] Constraint type - Constraint type + Forţa de constrângere Start edge type - Start edge type + Tip de margine de start Start edge size - Start edge size + Mărimea marginii de început End edge type - End edge type + Tip margine finală End edge size - End edge size + Dimensiune margine finală @@ -4791,13 +4788,13 @@ over 90: larger hole radius at the bottom Shaft design wizard... - Shaft design wizard... + Asistent pentru proiectarea arborelui... Start the shaft design wizard - Start the shaft design wizard + Începe asistentul de design al arborelui diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 5ac856a630..3b83474b0b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -123,7 +123,7 @@ so that self intersection is avoided. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Расстояние, на которое эталонный профиль сдвинут наружу, нормализуется модулем. @@ -1078,7 +1078,7 @@ so that self intersection is avoided. Profile Shift Coefficient - Profile Shift Coefficient + Коэффициент сдвига профиля @@ -1615,7 +1615,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + Пустая фаска создана! @@ -1716,7 +1716,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + Создан пустой черновик! @@ -1921,7 +1921,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + Пустое скругление создано! @@ -3143,7 +3143,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! + Создана пустая толщина! @@ -4546,8 +4546,8 @@ Only available for holes without thread For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Для зенкеров это глубина +верхняя часть винта ниже поверхности diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index f54d3241d9..981787eb5a 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -98,12 +98,12 @@ da se izogne samosečnosti. True=2 curves with each 3 control points False=1 curve with 4 control points. - True=2 curves with each 3 control points False=1 curve with 4 control points. + Drži=2 krivulji, vsaka s 3 nadzornimi točkami, Ne drži=1 krivulja s 4 nadzornimi točkami. True=external Gear False=internal Gear - True=external Gear False=internal Gear + Drži=zunanju zobnik, Ne drži=notranj zobnik @@ -118,7 +118,7 @@ da se izogne samosečnosti. The radius of the fillet at the root of the tooth, normalized by the module. - The radius of the fillet at the root of the tooth, normalized by the module. + Polmer zaokrožitve v korenu zoba, uenoten z modulom. @@ -1612,7 +1612,7 @@ s ponovnim klikom pa zaključite izbiranje Empty chamfer created ! - Empty chamfer created ! + Ustvarjeno brez priseka! @@ -1713,7 +1713,7 @@ s ponovnim klikom pa zaključite izbiranje Empty draft created ! - Empty draft created ! + Ustvarjeno brez nagiba! @@ -1918,7 +1918,7 @@ s ponovnim klikom pa zaključite izbiranje Empty fillet created ! - Empty fillet created ! + Ustvarjeno brez zaokrožitve! @@ -3142,7 +3142,7 @@ s ponovnim klikom pa zaključite izbiranje Empty thickness created ! - Empty thickness created ! + Ustvarjeno brez debeline! @@ -4548,8 +4548,8 @@ Na voljo le pri luknjah breh navoja For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Pri kotnem grezenju je to poglobitev +vrha glave vijaka pod površje diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts index 1538040cc1..9ad44355e8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts @@ -123,7 +123,7 @@ so that self intersection is avoided. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Rastojanje za koje je referentni profil pomeren prema spolja, normalizovan modulom. @@ -773,17 +773,17 @@ so that self intersection is avoided. Additive Cylinder - Dodaj cilindar + Dodaj valjak Additive Sphere - Dodaj sferu + Dodaj loptu Additive Cone - Dodaj konus + Dodaj kupu @@ -827,17 +827,17 @@ so that self intersection is avoided. Subtractive Cylinder - Oduzmi cilindar + Oduzmi valjak Subtractive Sphere - Oduzmi sferu + Oduzmi loptu Subtractive Cone - Oduzmi konus + Oduzmi kupu @@ -1078,7 +1078,7 @@ so that self intersection is avoided. Profile Shift Coefficient - Profile Shift Coefficient + Koeficijent pomeranja profila @@ -1505,12 +1505,12 @@ nula, onda je jednak poluprečniku 2 Cone radii are equal - Poluprečnici konusa su jednaki + Poluprečnici kupe su jednaki The radii for cones must not be equal! - Poluprečnici konusa ne smeju biti jednaki! + Poluprečnici kupe ne smeju biti jednaki! @@ -1615,7 +1615,7 @@ klikni ponovo da bi završio izbor Empty chamfer created ! - Empty chamfer created ! + Napravljen je prazan tipski oblik Obaranje ivica ! @@ -1716,7 +1716,7 @@ klikni ponovo da bi završio izbor Empty draft created ! - Empty draft created ! + Napravljen je prazan tipski oblik Zakošenje ! @@ -1774,7 +1774,7 @@ klikni ponovo da bi završio izbor Select reference... - Select reference... + Izaberi sopstvenu... @@ -1921,7 +1921,7 @@ klikni ponovo da bi završio izbor Empty fillet created ! - Empty fillet created ! + Napravljen je prazan tipski oblik Zaobljenje ! @@ -1969,13 +1969,13 @@ klikni ponovo da bi završio izbor Horizontal sketch axis - Horizontal sketch axis + Horizontalna osa skice Vertical sketch axis - Vertical sketch axis + Vertikalna osa skice @@ -1987,7 +1987,7 @@ klikni ponovo da bi završio izbor Select reference... - Select reference... + Izaberi sopstvenu... @@ -2047,7 +2047,7 @@ klikni ponovo da bi završio izbor Reversed - Reversed + Obrnuti smer @@ -2158,7 +2158,7 @@ klikni ponovo da bi završio izbor Reverse direction - Reverse direction + Obrni smer @@ -2475,7 +2475,7 @@ iz modela kao referentnu Select reference... - Select reference... + Izaberi sopstvenu... @@ -2544,12 +2544,12 @@ merena duž zadatog pravca Symmetric to plane - Symmetric to plane + Simetrično u odnosu na ravan Reversed - Reversed + Obrnuti smer @@ -2872,7 +2872,7 @@ merena duž zadatog pravca Reverse direction - Reverse direction + Obrni smer @@ -2946,18 +2946,18 @@ merena duž zadatog pravca Horizontal sketch axis - Horizontal sketch axis + Horizontalna osa skice Vertical sketch axis - Vertical sketch axis + Vertikalna osa skice Select reference... - Select reference... + Izaberi sopstvenu... @@ -2967,12 +2967,12 @@ merena duž zadatog pravca Symmetric to plane - Symmetric to plane + Simetrično u odnosu na ravan Reversed - Reversed + Obrnuti smer @@ -3145,7 +3145,7 @@ klikni ponovo da bi završio izbor Empty thickness created ! - Empty thickness created ! + Napravljen je prazan tipski oblik Debljina ! @@ -3167,12 +3167,12 @@ klikni ponovo da bi završio izbor Vertical sketch axis - Vertical sketch axis + Vertikalna osa skice Horizontal sketch axis - Horizontal sketch axis + Horizontalna osa skice @@ -3199,7 +3199,7 @@ klikni ponovo da bi završio izbor Select reference... - Select reference... + Izaberi sopstvenu... @@ -3330,17 +3330,17 @@ klikni ponovo da bi završio izbor Create an additive cylinder by its radius, height, and angle - Dodaj napravljeni cilindar na osnovu njegovog radijusa, visine i ugla + Dodaj napravljeni valjak na osnovu njegovog radijusa, visine i ugla Create an additive sphere by its radius and various angles - Dodaj napravljenu sferu na osnovu njenog radijusa i različitih uglova + Dodaj napravljenu loptu na osnovu njenog radijusa i različitih uglova Create an additive cone - Dodaj napravljeni konus + Dodaj napravljenu kupu @@ -3373,17 +3373,17 @@ klikni ponovo da bi završio izbor Create a subtractive cylinder by its radius, height and angle - Oduzmi napravljeni cilindar na osnovu njegovog radijusa, visine i ugla + Oduzmi napravljeni valjak na osnovu njegovog radijusa, visine i ugla Create a subtractive sphere by its radius and various angles - Oduzmi napravljenu sferu na osnovu njenog radijusa i različitih uglova + Oduzmi napravljenu loptu na osnovu njenog radijusa i različitih uglova Create a subtractive cone - Oduzmi napravljeni konus + Oduzmi napravljenu kupu @@ -3809,13 +3809,13 @@ Ovo može dovesti do neočekivanih rezultata. Vertical sketch axis - Vertical sketch axis + Vertikalna osa skice Horizontal sketch axis - Horizontal sketch axis + Horizontalna osa skice @@ -4551,8 +4551,8 @@ Dostupno samo za rupe bez navoja For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Za konusno upušten otvor ovo je +dubina kosine upuštanja @@ -4615,7 +4615,7 @@ iznad 90: veći poluprečnik rupe na dnu Reversed - Reversed + Obrnuti smer diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index 948e68dd2e..704676a39c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -123,7 +123,7 @@ so that self intersection is avoided. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + Растојање за које је референтни профил померен према споља, нормализован модулом. @@ -773,17 +773,17 @@ so that self intersection is avoided. Additive Cylinder - Додај цилиндар + Додај ваљак Additive Sphere - Додај сферу + Додај лопту Additive Cone - Додај конус + Додај купу @@ -827,17 +827,17 @@ so that self intersection is avoided. Subtractive Cylinder - Одузми цилиндар + Одузми ваљак Subtractive Sphere - Одузми сферу + Одузми лопту Subtractive Cone - Одузми конус + Одузми купу @@ -1078,7 +1078,7 @@ so that self intersection is avoided. Profile Shift Coefficient - Profile Shift Coefficient + Коефицијент померања профила @@ -1505,12 +1505,12 @@ If zero, it is equal to Radius2 Cone radii are equal - Полупречници конуса су једнаки + Полупречници купе су једнаки The radii for cones must not be equal! - Полупречници конуса не смеју бити једнаки! + Полупречници купе не смеју бити једнаки! @@ -1615,7 +1615,7 @@ click again to end selection Empty chamfer created ! - Empty chamfer created ! + Направљен је празан типски облик Обарање ивица ! @@ -1716,7 +1716,7 @@ click again to end selection Empty draft created ! - Empty draft created ! + Направљен је празан типски облик Закошење ! @@ -1774,7 +1774,7 @@ click again to end selection Select reference... - Одабери референцу... + Изабери сопствену... @@ -1921,7 +1921,7 @@ click again to end selection Empty fillet created ! - Empty fillet created ! + Направљен је празан типски облик Заобљење ! @@ -1969,7 +1969,7 @@ click again to end selection Horizontal sketch axis - Хоризонтална оcа cкице + Хоризонтална оса скице @@ -1987,7 +1987,7 @@ click again to end selection Select reference... - Одабери референцу... + Изабери сопствену... @@ -2032,7 +2032,7 @@ click again to end selection Cone angle: - Угао конуса: + Угао купе: @@ -2047,7 +2047,7 @@ click again to end selection Reversed - Обрнуто + Обрнути смер @@ -2158,7 +2158,7 @@ click again to end selection Reverse direction - Reverse direction + Обрни смер @@ -2475,7 +2475,7 @@ from the model as reference Select reference... - Одабери референцу... + Изабери сопствену... @@ -2544,12 +2544,12 @@ measured along the specified direction Symmetric to plane - Симетрично наспрам равни + Симетрично у односу на раван Reversed - Обрнуто + Обрнути смер @@ -2872,7 +2872,7 @@ measured along the specified direction Reverse direction - Reverse direction + Обрни смер @@ -2946,7 +2946,7 @@ measured along the specified direction Horizontal sketch axis - Хоризонтална оcа cкице + Хоризонтална оса скице @@ -2957,7 +2957,7 @@ measured along the specified direction Select reference... - Одабери референцу... + Изабери сопствену... @@ -2967,12 +2967,12 @@ measured along the specified direction Symmetric to plane - Симетрично наспрам равни + Симетрично у односу на раван Reversed - Обрнуто + Обрнути смер @@ -3145,7 +3145,7 @@ click again to end selection Empty thickness created ! - Empty thickness created ! + Направљен је празан типски облик Дебљина ! @@ -3172,7 +3172,7 @@ click again to end selection Horizontal sketch axis - Хоризонтална оcа cкице + Хоризонтална оса скице @@ -3199,7 +3199,7 @@ click again to end selection Select reference... - Одабери референцу... + Изабери сопствену... @@ -3330,17 +3330,17 @@ click again to end selection Create an additive cylinder by its radius, height, and angle - Додај направљени цилиндар на основу његовог радијуса, висине и угла + Додај направљени ваљак на основу његовог радијуса, висине и угла Create an additive sphere by its radius and various angles - Додај направљену сферу на основу њеног радијуса и различитих углова + Додај направљену лопту на основу њеног радијуса и различитих углова Create an additive cone - Додај направљени конус + Додај направљену купу @@ -3373,17 +3373,17 @@ click again to end selection Create a subtractive cylinder by its radius, height and angle - Одузми направљени цилиндар на основу његовог радијуса, висине и угла + Одузми направљени ваљак на основу његовог радијуса, висине и угла Create a subtractive sphere by its radius and various angles - Одузми направљену сферу на основу њеног радијуса и различитих углова + Одузми направљену лопту на основу њеног радијуса и различитих углова Create a subtractive cone - Одузми направљени конус + Одузми направљену купу @@ -3815,7 +3815,7 @@ This may lead to unexpected results. Horizontal sketch axis - Хоризонтална оcа cкице + Хоризонтална оса скице @@ -4551,8 +4551,8 @@ Only available for holes without thread For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + За конусно упуштен отвор ово је +дубина косине упуштања @@ -4615,7 +4615,7 @@ over 90: larger hole radius at the bottom Reversed - Обрнуто + Обрнути смер diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index c866261551..bbbbe06008 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -1236,12 +1236,12 @@ Please select a body from below, or create a new body. U parameter: - 繞指定軸角度： + 繞指定軸角度: V parameters: - 與指定軸之夾角： + 與指定軸之夾角: @@ -1269,7 +1269,7 @@ If zero, it is equal to Radius2 V parameter: - 與指定軸之夾角： + 與指定軸之夾角: @@ -1284,7 +1284,7 @@ If zero, it is equal to Radius2 U Parameter: - 繞指定軸角度： + 繞指定軸角度: @@ -1296,7 +1296,7 @@ If zero, it is equal to Radius2 Circumradius: - 外接圓 + 外接圓: @@ -1326,12 +1326,12 @@ If zero, it is equal to Radius2 Pitch: - 俯仰： + 俯仰: Coordinate system: - 座標系統： + 座標系統: @@ -1346,24 +1346,24 @@ If zero, it is equal to Radius2 Growth: - 成長： + 增長: Number of rotations: - 迴旋數量： + 迴旋數量: Angle 1: - 角度 1： + 角度 1: Angle 2: - 角度 2： + 角度 2: @@ -1373,12 +1373,12 @@ If zero, it is equal to Radius2 Major radius: - 主半徑： + 主半徑: Minor radius: - 次要半徑： + 次要半徑: @@ -1404,12 +1404,12 @@ If zero, it is equal to Radius2 Start point - 起始點 + 起點 End point - 最末點 + 終點 @@ -2013,7 +2013,7 @@ click again to end selection Pitch: - 俯仰： + 俯仰: @@ -2053,7 +2053,7 @@ click again to end selection Update view - 更新視圖 + 更新檢視 @@ -2174,7 +2174,7 @@ click again to end selection Update view - 更新視圖 + 更新檢視 @@ -2207,12 +2207,12 @@ click again to end selection Profile - 外觀 + 輪廓特徵 Object - 物件 + 物體 @@ -2232,7 +2232,7 @@ click again to end selection Update view - 更新視圖 + 更新檢視 @@ -2280,7 +2280,7 @@ click again to end selection Update view - 更新視圖 + 更新檢視 @@ -2323,7 +2323,7 @@ click again to end selection Update view - 更新視圖 + 更新檢視 @@ -2574,7 +2574,7 @@ measured along the specified direction Update view - 更新視圖 + 更新檢視 @@ -2602,7 +2602,7 @@ measured along the specified direction Frenet - Frenet + 弗倫內公式(Frenet) @@ -2612,7 +2612,7 @@ measured along the specified direction Binormal - Binormal + 次法線 @@ -2622,12 +2622,12 @@ measured along the specified direction Profile - 外觀 + 輪廓特徵 Object - 物件 + 物體 @@ -2680,13 +2680,13 @@ measured along the specified direction Profile - 外觀 + 輪廓特徵 Object - 物件 + 物體 @@ -2886,7 +2886,7 @@ measured along the specified direction Update view - 更新視圖 + 更新檢視 @@ -2971,7 +2971,7 @@ measured along the specified direction Update view - 更新視圖 + 更新檢視 @@ -3014,7 +3014,7 @@ measured along the specified direction Update view - 更新視圖 + 更新檢視 @@ -3032,7 +3032,7 @@ measured along the specified direction Object - 物件 + 物體 @@ -4361,7 +4361,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Profile - 外觀 + 輪廓特徵 @@ -4393,7 +4393,7 @@ Note that the calculation can take some time Update view - 更新視圖 + 更新檢視 @@ -4699,7 +4699,7 @@ over 90: larger hole radius at the bottom Toggle 3D - Toggle 3D + 切換 3D diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index ce638433d2..bcac1fa54e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -166,7 +166,7 @@ <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> - <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> + <html><head/><body><p>Pokud je povoleno, jsou definice ovladače nástroje uloženy v šabloně.</p></body></html> @@ -176,12 +176,12 @@ <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> - <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> + <html><head/><body><p>Zaškrtněte všechny ovladače nástrojů, které by měly být součástí šablony.</p></body></html> <html><head/><body><p>Enable to include values of the SetupSheet in the template.</p><p>Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified.</p></body></html> - <html><head/><body><p>Enable to include values of the SetupSheet in the template.</p><p>Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified.</p></body></html> + <html><head/><body><p>Povolit, aby se do šablony zahrnuly hodnoty SetupSheet.</p><p>Všechny hodnoty SetupSheet, které se změní oproti výchozím hodnotám, jsou předem vybrány. Pokud toto pole není vybráno, aktuální SetupSheet nebyl upraven.</p></body></html> @@ -191,7 +191,7 @@ <html><head/><body><p>Enable to include the default heights for operations in the template.</p></body></html> - <html><head/><body><p>Enable to include the default heights for operations in the template.</p></body></html> + <html><head/><body><p>Povolte zahrnutí výchozích výšek pro operace do šablony.</p></body></html> @@ -216,7 +216,7 @@ <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> - <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> + <html><head/><body><p>Povolením zahrnete do šablony výchozí režim chladicí kapaliny.</p></body></html> @@ -231,7 +231,7 @@ <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> - <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> + <html><head/><body><p>Pokud je povoleno, je v šabloně zahrnuto vytváření zásob. Pokud šablona neobsahuje definici zásoby, použije se výchozí algoritmus pro vytvoření zásoby (vytvoření z rámečku vázaného objektu Base).</p><p>Tato možnost je nejužitečnější, pokud je skladem krabice nebo válec nebo stroj má standardní umístění pro obrábění.</p><p>Všimněte si, že tato možnost je zakázána, pokud je v zakázce použit skladový objekt z existujícího tělesa – nelze je uložit do šablony.</p></body ></html> @@ -241,7 +241,7 @@ <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> - <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> + <html><head/><body><p>Pokud je povoleno, je aktuální nastavení velikosti pro objekt polotovaru zahrnuto v šabloně.</p><p>Pro polotovary v krabici a válce to znamená skutečnou velikost polotovaru právě se vytváří.</p><p>Pro zásobu z vázaného rámečku objektu Base to znamená extra materiál ve všech směrech. Skladový objekt vytvořený z takové šablony získá svou základní velikost z objektu Base nové úlohy a použije uložená další nastavení.</p></body></html> @@ -251,12 +251,12 @@ <html><head/><body><p>Hint about the current stock extent setting.</p></body></html> - <html><head/><body><p>Hint about the current stock extent setting.</p></body></html> + <html><head/><body><p>Nápověda k aktuálnímu nastavení rozsahu akcií.</p></body></html> <html><head/><body><p>If enabled the current placement of the stock solid is stored in the template.</p></body></html> - <html><head/><body><p>If enabled the current placement of the stock solid is stored in the template.</p></body></html> + <html><head/><body><p>Pokud je povoleno, aktuální umístění tělesa zásoby je uloženo v šabloně.</p></body></html> @@ -266,7 +266,7 @@ <html><head/><body><p>Hint about the current stock placement.</p></body></html> - <html><head/><body><p>Hint about the current stock placement.</p></body></html> + <html><head/><body><p>Nápověda k aktuálnímu umístění akcií.</p></body></html> @@ -281,7 +281,7 @@ <html><head/><body><p>Select one of the post processors.</p><p>FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences.</p></body></html> - <html><head/><body><p>Select one of the post processors.</p><p>FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences.</p></body></html> + <html><head/><body><p>Vyberte jeden z postprocesorů.</p><p>FreeCAD je dodáván s několika předinstalovanými postprocesory, ujistěte se prosím, že alespoň jeden z nich je povolen ve vašich preferencích.</p></body></html> @@ -296,7 +296,7 @@ Controller Name / Tool Number - Controller Name / Tool Number + Název ovladače / Číslo nástroje @@ -341,7 +341,7 @@ Any modifications only affect this ToolController! - Any modifications only affect this ToolController! + Jakékoli úpravy se týkají pouze tohoto ToolController! @@ -351,7 +351,7 @@ Create Property - Create Property + Vytvořit vlastnost @@ -361,12 +361,12 @@ <html><head/><body><p>Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces &quot;Mixed Case&quot;</p></body></html> - <html><head/><body><p>Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces &quot;Mixed Case&quot;</p></body></html> + <html><head/><body><p>Název služby. Může obsahovat pouze písmena, čísla a podtržítka. Názvy smíšených velikostí písmen se zobrazí s mezerami &quot;Smíšená velká a malá písmena&quot;</p></body></html> <html><head/><body><p>The category group the property belongs to.</p></body></html> - <html><head/><body><p>The category group the property belongs to.</p></body></html> + <html><head/><body><p>Skupina kategorií, do které nemovitost patří.</p></body></html> @@ -376,7 +376,7 @@ <html><head/><body><p>The type of the property value.</p></body></html> - <html><head/><body><p>The type of the property value.</p></body></html> + <html><head/><body><p>Typ hodnoty vlastnosti.</p></body></html> @@ -386,17 +386,17 @@ val1,val2,val3,... - val1,val2,val3,... + hodnota1, hodnota2, hodnota3,... <html><head/><body><p>ToolTip to be displayed when user hovers mouse over property.</p></body></html> - <html><head/><body><p>ToolTip to be displayed when user hovers mouse over property.</p></body></html> + <html><head/><body><p>Tip, který se zobrazí, když uživatel najede myší na službu.</p></body></html> Enums - Enums + Výčty @@ -406,7 +406,7 @@ <html><head/><body><p>Check if you want to create several properties in a batch.</p></body></html> - <html><head/><body><p>Check if you want to create several properties in a batch.</p></body></html> + <html><head/><body><p>Zaškrtněte, pokud chcete vytvořit několik vlastností v dávce.</p></body></html> @@ -426,7 +426,7 @@ <html><head/><body><p>Add existing Tool Bit to this library.</p><p><br/></p></body></html> - <html><head/><body><p>Add existing Tool Bit to this library.</p><p><br/></p></body></html> + <html><head/><body><p>Přidejte stávající nástroj Bit do této knihovny.</p><p><br/></p></body></html> @@ -436,7 +436,7 @@ <html><head/><body><p>Delete selected Tool Bit(s) from the library.</p><p><br/></p></body></html> - <html><head/><body><p>Delete selected Tool Bit(s) from the library.</p><p><br/></p></body></html> + <html><head/><body><p>Odstranit vybrané nástrojové (bity) z knihovny.</p><p><br/></p></body></html> @@ -446,27 +446,27 @@ <html><head/><body><p>Select a working path for the tool library editor.</p></body></html> - <html><head/><body><p>Select a working path for the tool library editor.</p></body></html> + <html><head/><body><p>Vyberte pracovní cestu pro editor knihovny nástrojů.</p></body></html> <html><head/><body><p>Add New Tool Table</p></body></html> - <html><head/><body><p>Add New Tool Table</p></body></html> + <html><head/><body><p>Přidat novou tabulku nástrojů</p></body></html> <html><head/><body><p>Save the selected library with a new name or export to another format</p></body></html> - <html><head/><body><p>Save the selected library with a new name or export to another format</p></body></html> + <html><head/><body><p>Uložte vybranou knihovnu pod novým názvem nebo exportujte do jiného formátu</p></body></html> <html><head/><body><p>Table of Tool Bits of the library.</p></body></html> - <html><head/><body><p>Table of Tool Bits of the library.</p></body></html> + <html><head/><body><p>Tabulka bitů nástrojů knihovny.</p></body></html> <html><head/><body><p>Save the current Library</p></body></html> - <html><head/><body><p>Save the current Library</p></body></html> + <html><head/><body><p>Uložit aktuální knihovnu</p></body></html> @@ -479,12 +479,12 @@ Choose a Path Job - Choose a Path Job + Vyberte si úlohu cesty Choose a Tool Controller - Choose a Tool Controller + Vyberte ovladač nástroje @@ -512,7 +512,7 @@ Processor - Processor + Procesor @@ -554,12 +554,12 @@ Boundary Body - Boundary Body + Hraniční těleso <html><head/><body><p>Select what type of shape to use to constrain the underlying Path.</p></body></html> - <html><head/><body><p>Select what type of shape to use to constrain the underlying Path.</p></body></html> + <html><head/><body><p>Vyberte, jaký typ tvaru použít k omezení základní cesty.</p></body></html> @@ -574,7 +574,7 @@ Extend Model's Bound Box - Extend Model's Bound Box + Rozšířit ohraničenou krabici modelu @@ -584,7 +584,7 @@ <html><head/><body><p>Select the body to be used to constrain the underlying Path.</p></body></html> - <html><head/><body><p>Select the body to be used to constrain the underlying Path.</p></body></html> + <html><head/><body><p>Vyberte tělo, které se použije k omezení základní cesty.</p></body></html> @@ -2003,7 +2003,7 @@ Fit - Fit + Přizpůsobení @@ -2425,7 +2425,7 @@ Extend Model's Bound Box - Extend Model's Bound Box + Rozšířit ohraničenou krabici modelu @@ -2913,7 +2913,7 @@ p, li { white-space: pre-wrap; } Dogbone - Dogbone + Dogbone @@ -3524,7 +3524,7 @@ p, li { white-space: pre-wrap; } Processor - Processor + Procesor @@ -3609,7 +3609,7 @@ p, li { white-space: pre-wrap; } Extend Model's Bound Box - Extend Model's Bound Box + Rozšířit ohraničenou krabici modelu diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 082bccabab..1a7087ebc8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -1126,13 +1126,13 @@ CW - CW + CW CCW - CCW + CCW @@ -2913,7 +2913,7 @@ p, li { white-space: pre-wrap; } Dogbone - Dogbone + Tulang anjing diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index 02862d9776..cd8c28cb53 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -52,7 +52,7 @@ Creates a compound from selected paths - Tworzy kombinacje z wybranych ścieżek + Tworzy złożenie z wybranych ścieżek @@ -65,7 +65,7 @@ From Shape - Od Kształtu + Z Kształtu @@ -116,7 +116,7 @@ <html><head/><body><p>Select a template to be used for the job.</p><p>In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list.</p></body></html> - <html><head/><body><p>Wybierz szablon do użycia.</p><p>Jeśli nie ma dostępnych żadnych szablonów, można je utworzyć z menu podręcznego w istniejącym zadaniu. Nazwij plik job_*.json i umieść go w katalogu makco lub path (zobacz preferencje), aby był możliwy do wybrania z tej listy.</p></body></html> + <html><head/><body><p>Wybierz szablon do użycia.</p><p>Jeśli nie ma dostępnych żadnych szablonów, można je utworzyć z menu podręcznego w istniejącym zadaniu. Nazwij plik job_*.json i umieść go w katalogu macro lub path (zobacz preferencje), aby był możliwy do wybrania z tej listy.</p></body></html> diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index 6bd18aaab1..9db301ab8c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -16,7 +16,7 @@ Creates a feature area from selected objects - Creates a feature area from selected objects + Creează o zonă de caracteristici din obiectele selectate @@ -29,12 +29,12 @@ Area workplane - Area workplane + Plan de lucru zonal Select a workplane for a FeatureArea - Select a workplane for a FeatureArea + Selectaţi un plan de lucru pentru o zonă de caracteristici @@ -78,27 +78,27 @@ Create Path Area View - Create Path Area View + Creați vizualizarea zonei de cale Create Path Area - Create Path Area + Creați vizualizarea zonei de cale Select Workplane for Path Area - Select Workplane for Path Area + Selectaţi un plan de lucru pentru o zonă de caracteristici Create Path Compound - Create Path Compound + Creați un compus de cale Create Path Shape - Create Path Shape + Creați vizualizarea zonei de cale @@ -116,7 +116,7 @@ <html><head/><body><p>Select a template to be used for the job.</p><p>In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list.</p></body></html> - <html><head/><body><p>Select a template to be used for the job.</p><p>In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list.</p></body></html> + <html><head/><body><p>Selectați un șablon pentru a fi folosit pentru lucrare.</p><p>În cazul în care nu există șabloane puteți crea unul prin meniul pop-up al unui job existent. Numiți fișierul job_*.json și plasați-l în macro sau în directorul de căi (vezi preferințe) pentru a putea fi selectat din această listă.</p></body></html> @@ -126,7 +126,7 @@ Select Base Models - Select Base Models + Selectați modelele de bază @@ -141,32 +141,32 @@ Base Models - Base Models + Modele de bază Job Template Export - Job Template Export + Export șablon de lucru <html><head/><body><p>If enabled include all post processing settings in the template.</p></body></html> - <html><head/><body><p>If enabled include all post processing settings in the template.</p></body></html> + <html><head/><body><p>Dacă este activată, include toate setările de procesare a postărilor în șablon.</p></body></html> Post Processing - Post Processing + Post procesare <html><head/><body><p>Hint about the current post processing configuration.</p></body></html> - <html><head/><body><p>Hint about the current post processing configuration.</p></body></html> + <html><head/><body><p>Sfaturi despre configurația curentă a post-procesării.</p></body></html> <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> - <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> + <html><head/><body><p>Dacă este activată, definițiile controlerului de unelte sunt stocate în șablon.</p></body></html> @@ -176,87 +176,87 @@ <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> - <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> + <html><head/><body><p>Dacă este activată, definițiile controlerului de unelte sunt stocate în șablon.</p></body></html> <html><head/><body><p>Enable to include values of the SetupSheet in the template.</p><p>Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified.</p></body></html> - <html><head/><body><p>Enable to include values of the SetupSheet in the template.</p><p>Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified.</p></body></html> + <html><head/><body><p>Activați să includeți valorile setupSheet în șablon.</p><p>Orice valori ale foii de configurare care sunt schimbate din valoarea lor implicită sunt preselectate. Dacă acest câmp nu a selectat configurarea curentă nu a fost modificată.</p></body></html> Setup Sheet - Setup Sheet + Configurare placă <html><head/><body><p>Enable to include the default heights for operations in the template.</p></body></html> - <html><head/><body><p>Enable to include the default heights for operations in the template.</p></body></html> + <html><head/><body><p>Activați includerea înălțimilor implicite pentru operațiunile din șablon.</p></body></html> Operation Heights - Operation Heights + Înălțimi operațiune Operation Depths - Operation Depths + Adâncimile operațiunii <html><head/><body><p>Enable to include the default rapid tool speeds in the template.</p></body></html> - <html><head/><body><p>Enable to include the default rapid tool speeds in the template.</p></body></html> + <html><head/><body><p>Activați pentru a include în șablon vitezele implicite ale uneltelor rapide.</p></body></html> Tool Rapid Speeds - Tool Rapid Speeds + Viteza Uneltelor Rapide <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> - <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> + <html><head/><body><p>Activează includerea modului de răcire implicit în șablon.</p></body></html> Coolant Mode - Coolant Mode + Mod Coolant <html><head/><body><p>Enable all Operations for which the configuration values should be exported.</p><p><br/></p><p>Note that only operations are listed which currently have configuration values setup.</p></body></html> - <html><head/><body><p>Enable all Operations for which the configuration values should be exported.</p><p><br/></p><p>Note that only operations are listed which currently have configuration values setup.</p></body></html> + <html><head/><body><p>Activează toate Operațiunile pentru care valorile de configurare ar trebui să fie exportate.</p><p><br/></p><p>Reține că doar operațiunile sunt listate care au în prezent valorile de configurare.</p></body></html> <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> - <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bound box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> + <html><head/><body><p>Dacă este activată, crearea stocului este inclusă în șablon. Dacă un șablon nu include o definiție stoc, va fi utilizat algoritmul de creare a stocului implicit (creare din caseta de legare a obiectului de bază).</p><p>Această opțiune este cea mai utilă dacă stocul este o cutie sau un cilindru, sau dacă mașina are un plasament standard pentru mașini.</p><p>Reține că această opțiune este dezactivată dacă un obiect stoc dintr-un solid existent este folosit la locul de muncă - acesta nu poate fi stocat într-un șablon.</p></body></html> Stock - Stock + depozit <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> - <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bound box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> + <html><head/><body><p>Dacă este activată, setările de dimensiune curente pentru obiectul stoc sunt incluse în șablon.</p><p>Pentru stocurile de chenar și cilindri, aceasta înseamnă dimensiunea reală a solidului stocului care este creat.</p><p>Pentru stocul din caseta de încadrare a obiectului de bază înseamnă materialul suplimentar în toate direcțiile. Un obiect stoc creat dintr-un astfel de șablon va obține dimensiunea sa de bază de la noul obiect job Base și va aplica setările suplimentare stocate.</p></body></html> Extent - Extent + Măsură <html><head/><body><p>Hint about the current stock extent setting.</p></body></html> - <html><head/><body><p>Hint about the current stock extent setting.</p></body></html> + <html><head/><body><p>Spune despre setarea curentă a gradului de masura.</p></body></html> <html><head/><body><p>If enabled the current placement of the stock solid is stored in the template.</p></body></html> - <html><head/><body><p>If enabled the current placement of the stock solid is stored in the template.</p></body></html> + <html><head/><body><p>Dacă este activată, plasamentul curent al solidului stocului este stocat în șablon.</p></body></html> @@ -266,7 +266,7 @@ <html><head/><body><p>Hint about the current stock placement.</p></body></html> - <html><head/><body><p>Hint about the current stock placement.</p></body></html> + <html><head/><body><p>Sfaturi despre configurația curentă a post-procesării.</p></body></html> @@ -276,57 +276,59 @@ Post Processor - Post Processor + Post procesare <html><head/><body><p>Select one of the post processors.</p><p>FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences.</p></body></html> - <html><head/><body><p>Select one of the post processors.</p><p>FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences.</p></body></html> + <html><head/><body><p>Selectaţi unul dintre procesoarele de postare.</p><p>FreeCAD vine cu mai multe postări pre-instalate, asigură-te că cel puțin una dintre ele este activată în preferințele tale.</p></body></html> Tool Controller Editor - Tool Controller Editor + Editor de controler de instrumente Controller - Controller + inspector + Controller Name / Tool Number - Controller Name / Tool Number + Numele inspectorului / Numărul Uneltei Horiz. Feed - Horiz. Feed + Orizont. Fluxuri Vert. Feed - Vert. Feed + Vertical.Fluxuri Horiz Rapid - Horiz Rapid + Orizont.Rapid Vert Rapid - Vert Rapid + Vertical.Rapid + Spindle - Spindle + Ax Forward - Forward + Înainte @@ -341,17 +343,18 @@ Any modifications only affect this ToolController! - Any modifications only affect this ToolController! + Orice modificare afectează numai acest Inspector de instrumente! Tool Editor - Tool Editor + Editeaza unealta + Create Property - Create Property + Creează o proprietate @@ -361,12 +364,12 @@ <html><head/><body><p>Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces &quot;Mixed Case&quot;</p></body></html> - <html><head/><body><p>Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces &quot;Mixed Case&quot;</p></body></html> + <html><head/><body><p>Numele proprietății. Pot conține doar litere, numere și linii de subliniere. Numele mixedCase va fi afișat cu spațiile &quot;Combinat Caz&quot;</p></body></html> <html><head/><body><p>The category group the property belongs to.</p></body></html> - <html><head/><body><p>The category group the property belongs to.</p></body></html> + <html><head/><body><p>Grupul de categorii căruia îi aparține proprietatea.</p></body></html> @@ -730,7 +733,7 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - <html><head/><body><p>Clears list of base geometries.</p></body></html> + <html><head/><body><p>Lista curățării geometrelor de bază.</p></body></html> @@ -741,17 +744,17 @@ All objects will be processed using the same operation properties - All objects will be processed using the same operation properties + Toate obiectele vor fi procesate folosind aceleași proprietăți <html><head/><body><p>Table of hole features and the determined radius of the associated hole.</p><p><br/></p><p>You can add feature for processing by selecting them and then pressing Add. If a feature is accidentally added to the list it can be removed through Remove and will no longer be processed.</p><p><br/></p><p>Reset deletes all current items from the list and fills the list with all circular holes eligible for the operation from the model. You can again refine the list afterwards by enabling/disabling, removing and adding features.</p></body></html> - <html><head/><body><p>Table of hole features and the determined radius of the associated hole.</p><p><br/></p><p>You can add feature for processing by selecting them and then pressing Add. If a feature is accidentally added to the list it can be removed through Remove and will no longer be processed.</p><p><br/></p><p>Reset deletes all current items from the list and fills the list with all circular holes eligible for the operation from the model. You can again refine the list afterwards by enabling/disabling, removing and adding features.</p></body></html> + <html><head/><body><p>Tabelul caracteristicilor găurii și raza determinată a găurii asociate.</p><p><br/></p><p>Puteți adăuga o funcție de procesare selectând-o apoi apăsând Add. Dacă o caracteristică este adăugată accidental la listă, poate fi eliminată prin Eliminare și nu va mai fi procesată.</p><p><br/></p><p>Resetează șterge toate articolele curente din listă și completează lista cu găuri circulare eligibile pentru operațiune din model. Puteți rafina din nou lista după, prin activarea/dezactivarea, ștergerea și adăugarea caracteristicilor.</p></body></html> Feature - Feature + Caracteristică @@ -961,7 +964,7 @@ Coolant Mode - Coolant Mode + Mod Coolant @@ -1378,12 +1381,12 @@ Climb - Climb + Urcare Conventional - Conventional + Convențional @@ -1932,7 +1935,7 @@ Clearance - Clearance + Îndepărtare @@ -1967,7 +1970,7 @@ Horizontal - Horizontal + Orizontal @@ -1977,7 +1980,7 @@ Vertical - Vertical + Verticală @@ -2018,7 +2021,7 @@ Pitch - Pitch + Pas @@ -2315,7 +2318,7 @@ Post Processor - Post Processor + Post procesare @@ -2410,7 +2413,7 @@ Stock - Stock + depozit @@ -2765,7 +2768,7 @@ p, li { white-space: pre-wrap; } LeadOut - LeadOut + LeadOut @@ -3209,7 +3212,7 @@ p, li { white-space: pre-wrap; } Coolant Mode - Coolant Mode + Mod Coolant @@ -3594,7 +3597,7 @@ p, li { white-space: pre-wrap; } Stock - Stock + depozit @@ -3796,7 +3799,7 @@ p, li { white-space: pre-wrap; } Clearance - Clearance + Îndepărtare @@ -3831,7 +3834,7 @@ p, li { white-space: pre-wrap; } Coolant Mode - Coolant Mode + Mod Coolant @@ -3868,7 +3871,7 @@ p, li { white-space: pre-wrap; } Spindle - Spindle + Ax @@ -3888,7 +3891,7 @@ p, li { white-space: pre-wrap; } Horizontal - Horizontal + Orizontal @@ -3898,7 +3901,7 @@ p, li { white-space: pre-wrap; } Vertical - Vertical + Verticală diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts index a96c635272..3829bfde3f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts @@ -569,7 +569,7 @@ Create Cylinder - Napravi Cilindar + Napravi valjak @@ -2420,7 +2420,7 @@ Create Cylinder - Napravi Cilindar + Napravi valjak @@ -3604,7 +3604,7 @@ p, li { white-space: pre-wrap; } Create Cylinder - Napravi Cilindar + Napravi valjak diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index e03b23b79a..4d2db86839 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -569,7 +569,7 @@ Create Cylinder - Направи Цилиндар + Направи ваљак @@ -2420,7 +2420,7 @@ Create Cylinder - Направи Цилиндар + Направи ваљак @@ -3604,7 +3604,7 @@ p, li { white-space: pre-wrap; } Create Cylinder - Направи Цилиндар + Направи ваљак diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts index 4db36122b8..0e577646f4 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts @@ -252,7 +252,7 @@ Do you want to continue? Wrong selection - 錯誤的選取 + 錯誤的選擇 diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts index d2c2141dd6..f15f97b1d4 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts @@ -228,12 +228,12 @@ View triangulation - + Placement Penempatan - + Fit B-Spline Fit B-Spline @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -331,18 +331,18 @@ ReenGui::FitBSplineSurfaceWidget - - + + Input error Input error - + Wrong selection Pilihan salah - + Please select a single placement object to get local orientation. Harap pilih satu objek penempatan untuk mendapatkan orientasi lokal. @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Membuat diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts index d511b79483..8278305b6a 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts @@ -16,7 +16,7 @@ Approximate a cylinder - Approximate a cylinder + Aproximează un cilindru @@ -29,7 +29,7 @@ Plane... - Plane... + Plan... @@ -47,12 +47,12 @@ Polynomial surface - Polynomial surface + Suprafață polinomială Approximate a polynomial surface - Approximate a polynomial surface + Aproximează o suprafaţă polinomială @@ -70,7 +70,7 @@ Approximate a sphere - Approximate a sphere + Aprobă o sferă @@ -101,12 +101,12 @@ Wire from mesh boundary... - Wire from mesh boundary... + Wire din limitele plasei... Create wire from mesh boundaries - Create wire from mesh boundaries + Creați un cablu din limitele ochiurilor de plasă @@ -137,7 +137,7 @@ Mesh segmentation... - Mesh segmentation... + Segmentarea plasei... @@ -160,7 +160,7 @@ Create mesh segments from components - Create mesh segments from components + Crează segmente de plasă din componente @@ -173,12 +173,12 @@ Manual segmentation... - Manual segmentation... + Segmentare manuală... Create mesh segments manually - Create mesh segments manually + Crează manual segmentele de plasă @@ -205,27 +205,27 @@ Fit plane - Fit plane + Potrivire plan Fit cylinder - Fit cylinder + Potrivire cilindru Fit sphere - Fit sphere + Potrivire sferică Fit polynomial surface - Fit polynomial surface + Potrivire pe suprafață polinomială View triangulation - View triangulation + Vezi triangularea @@ -235,17 +235,17 @@ Fit B-Spline - Fit B-Spline + Potrivire B-Spline Poisson reconstruction - Poisson reconstruction + Reconstrucția lui Poisson Segmentation - Segmentation + Segmentare @@ -300,7 +300,7 @@ Create placement - Create placement + Crează plasament @@ -391,7 +391,7 @@ Please select a point cloud or mesh. - Please select a point cloud or mesh. + Vă rugăm să selectați un punct cloud sau plasă. @@ -427,12 +427,12 @@ Curvature tolerance - Curvature tolerance + Toleranța curburii Distance to plane - Distance to plane + Distanța până la plan @@ -442,12 +442,12 @@ Create mesh from unused triangles - Create mesh from unused triangles + Creează o plasă din triunghiuri neutilizate Create compound - Create compound + Creați o combinată @@ -455,7 +455,7 @@ Manual segmentation - Manual segmentation + Segmentarea manuală @@ -507,7 +507,7 @@ Detect - Detect + Detectează @@ -551,17 +551,17 @@ Segmentation - Segmentation + Segmentare Cut segment from mesh - Cut segment from mesh + Tăiaţi segmentul din plasă Hide segment - Hide segment + Ascunde segment diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr-CS.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr-CS.ts index 9488d6eb30..1ef8a7806d 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr-CS.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr-CS.ts @@ -11,12 +11,12 @@ Cylinder - Cilindar + Valjak Approximate a cylinder - Aproksimiraj cilindar + Aproksimiraj valjak @@ -65,12 +65,12 @@ Sphere - Sfera + Lopta Approximate a sphere - Aproksimiraj sferu + Aproksimiraj loptu @@ -210,12 +210,12 @@ Fit cylinder - Uklopi cilindar + Uklopi valjak Fit sphere - Uklopi sferu + Uklopi loptu @@ -526,12 +526,12 @@ Cylinder - Cilindar + Valjak Sphere - Sfera + Lopta diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts index 052cdea0e1..6a2a63bc80 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts @@ -11,12 +11,12 @@ Cylinder - Цилиндар + Ваљак Approximate a cylinder - Апроксимирај цилиндар + Апроксимирај ваљак @@ -65,12 +65,12 @@ Sphere - Сфера + Лопта Approximate a sphere - Апроксимирај сферу + Апроксимирај лопту @@ -210,12 +210,12 @@ Fit cylinder - Уклопи цилиндар + Уклопи ваљак Fit sphere - Уклопи сферу + Уклопи лопту @@ -526,12 +526,12 @@ Cylinder - Цилиндар + Ваљак Sphere - Сфера + Лопта diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts index 9e477c3d71..05eba49e8b 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts @@ -339,7 +339,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -386,7 +386,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts index ed34243afd..9a595f2b9c 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts @@ -11,12 +11,12 @@ Add tool - Add tool + Tambahkan alat Add a tool shape to the robot - Add a tool shape to the robot + Tambahkan bentuk alat ke robot @@ -52,7 +52,7 @@ Create a new empty trajectory - Create a new empty trajectory + Buat lintasan kosong baru @@ -246,7 +246,7 @@ Set the default orientation for subsequent commands for waypoint creation - Set the default orientation for subsequent commands for waypoint creation + Atur orientasi default untuk perintah selanjutnya untuk pembuatan waypoint @@ -264,7 +264,7 @@ Set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation - Set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation + Tetapkan nilai default untuk kecepatan, akselerasi, dan kontinuitas untuk perintah pembuatan titik arah berikutnya @@ -356,17 +356,17 @@ QObject + + + + + - - - - - Wrong selection Pilihan salah @@ -381,11 +381,11 @@ Pilih satu Robot + - Select one Robot and one Trajectory object. Pilih satu Robot dan satu objek lintasan. @@ -397,7 +397,7 @@ You need at least two waypoints in a trajectory to simulate. - You need at least two waypoints in a trajectory to simulate. + Anda memerlukan setidaknya dua titik arah dalam lintasan untuk disimulasikan. @@ -441,7 +441,7 @@ Set default speed - Set default speed + Tetapkan kecepatan default @@ -451,7 +451,7 @@ Set default continuity - Set default continuity + Mengatur kontinuitas default @@ -461,7 +461,7 @@ Set default acceleration - Set default acceleration + Mengatur akselerasi default diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts index 112d393f2a..e96035fff7 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts @@ -368,7 +368,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index 6fa3726ff6..168affc7ce 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -421,7 +421,7 @@ Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses - Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses + Vytvořte souosou vazbu mezi body nebo soustřednou vazbu mezi kružnicemi, oblouky a elipsami @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Fixujte délku čáry nebo vzdálenost mezi čárou a vrcholem nebo mezi dvěma kružnicemi @@ -566,7 +566,7 @@ na vybraném vrcholu Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen - Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen + Fixujte průměr, pokud je vybrána kružnice, nebo poloměr, pokud je vybrán oblouk/spline pól @@ -593,8 +593,8 @@ na vybraném vrcholu Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Vytvořte omezení podle zákona lomu (Snellův zákon) mezi dvěma koncovými body paprsků +a hrana jako rozhraní. @@ -1149,12 +1149,12 @@ with respect to a line or a third point Join curves - Join curves + Spojit křivky Join two curves at selected end points - Join two curves at selected end points + Připojte se ke dvěma křivkám ve vybraných koncových bodech @@ -1679,7 +1679,7 @@ neplatných vazeb, degenerované geometrie atd. Add circle to circle distance constraint - Add circle to circle distance constraint + Přidat kruh do kružnice – omezení vzdálenosti @@ -2026,7 +2026,7 @@ neplatných vazeb, degenerované geometrie atd. Join Curves - Join Curves + Připojte se ke křivkám @@ -2114,7 +2114,7 @@ neplatných vazeb, degenerované geometrie atd. Add Knot Point - Add Knot Point + Přidat uzel @@ -2122,7 +2122,7 @@ neplatných vazeb, degenerované geometrie atd. Sketcher - Sketcher + Náčrt @@ -2236,7 +2236,7 @@ neplatných vazeb, degenerované geometrie atd. Sketcher - Sketcher + Náčrt @@ -2617,7 +2617,7 @@ neplatných vazeb, degenerované geometrie atd. Number of selected objects is not 3 - Number of selected objects is not 3 + Počet vybraných objektů není 3 @@ -2643,12 +2643,12 @@ neplatných vazeb, degenerované geometrie atd. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + Vyberte dva nebo více vrcholů ze skici pro shodnou vazbu nebo dvě nebo více kružnic, elips, oblouků nebo oblouků elips pro soustřednou vazbu. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + Vyberte dva vrcholy ze skici pro shodnou vazbu nebo dvě kružnice, elipsy, oblouky nebo oblouky elipsy pro soustřednou vazbu. @@ -2664,7 +2664,7 @@ neplatných vazeb, degenerované geometrie atd. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Vyberte přesně jednu čáru nebo jeden bod a jednu čáru nebo dva body nebo dvě kružnice ze skici. @@ -2847,17 +2847,17 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Tangent constraint at B-spline knot is only supported with lines! - Tangent constraint at B-spline knot is only supported with lines! + Omezení tečny u B-spline uzlu je podporováno pouze čarami! B-spline knot to endpoint tangency was applied instead. - B-spline knot to endpoint tangency was applied instead. + Místo toho byl použit uzel B-spline k tečnosti koncového bodu. Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Vyberte buď jeden bod a několik křivek, nebo jednu křivku a několik bodů. @@ -3079,28 +3079,28 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Nothing is selected. Please select end points of curves. - Nothing is selected. Please select end points of curves. + Není vybráno nic. Vyberte prosím koncové body křivek. Too many curves on point - Too many curves on point + Příliš mnoho křivek v bodě Exactly two curve should end at the selected point to be able to join them. - Exactly two curve should end at the selected point to be able to join them. + Přesně dvě křivky by měly končit ve vybraném bodě, aby bylo možné je spojit. Too few curves on point - Too few curves on point + Příliš málo zatáček Two end points, or coincident point should be selected. - Two end points, or coincident point should be selected. + Měly by být vybrány dva koncové body nebo shodný bod. @@ -3170,22 +3170,22 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Unsupported visual layer operation - Unsupported visual layer operation + Nepodporovaná operace vizuální vrstvy It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + V současné době není podporováno přesunutí externí geometrie do jiné vizuální vrstvy. Vnější geometrie bude vynechána Set knot multiplicity - Set knot multiplicity + Nastavte násobnost uzlu Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Nastavte násobnost uzlu v posledním uvedeném bodě mezi 1 a %1:Všimněte si, že násobnost může být za určitých okolností ignorována. Podrobnosti naleznete v dokumentaci @@ -3356,12 +3356,12 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Selected constraints - Selected constraints + Vybraná omezení Associated constraints - Associated constraints + Související vazby @@ -3517,7 +3517,7 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Internal - Internal + Interní @@ -3527,7 +3527,7 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; All types - All types + Všechny typy @@ -3552,27 +3552,27 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Arc of circle - Arc of circle + Kruhový oblouk Arc of ellipse - Arc of ellipse + Oblouk elipsy Arc of hyperbola - Arc of hyperbola + Oblouk hyperboly Arc of parabola - Arc of parabola + Oblouk paraboly B-Spline - B-Spline + B-splajn @@ -3812,12 +3812,12 @@ reflected on copies Task Panel Widgets - Task Panel Widgets + Widgety panelu úkolů Show section 'Advanced solver control' - Show section 'Advanced solver control' + Zobrazit sekci 'Rozšířené ovládání řešitele' @@ -4130,8 +4130,8 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - Base length units will not be displayed in constraints or cursor coordinates. -Supports all unit systems except 'US customary' and 'Building US/Euro'. + Jednotky základní délky nebudou zobrazeny ve vazbách nebo souřadnicích kurzoru. +Podporuje všechny jednotkové systémy kromě „US obvyklé“ a „Budování USA/Euro“. @@ -4146,7 +4146,7 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Cursor position coordinates will be displayed beside cursor while editing sketch. - Cursor position coordinates will be displayed beside cursor while editing sketch. + Při úpravě skici se vedle kurzoru zobrazí souřadnice polohy kurzoru. @@ -4214,17 +4214,17 @@ Výchozí nastavení: %N = %V Show coordinates beside cursor while editing - Show coordinates beside cursor while editing + Zobrazit souřadnice vedle kurzoru při úpravách Cursor coordinates will use the system decimals setting instead of the short form. - Cursor coordinates will use the system decimals setting instead of the short form. + Souřadnice kurzoru budou místo krátkého tvaru používat nastavení systémových desetinných míst. Use system decimals setting for cursor coordinates - Use system decimals setting for cursor coordinates + Pro souřadnice kurzoru použijte nastavení systémových desetinných míst @@ -4318,7 +4318,7 @@ Pak jsou objekty viditelné pouze za rovinou náčrtu. Sketcher - Sketcher + Náčrt @@ -4466,22 +4466,22 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. Check to toggle filters - Check to toggle filters + Zaškrtněte pro přepnutí filtrů Click to show filters - Click to show filters + Kliknutím zobrazíte filtry Filters - Filters + Filtry Show/hide all listed constraints from 3D view. (same as ticking/unticking all listed constraints in list below) - Show/hide all listed constraints from 3D view. (same as ticking/unticking all listed constraints in list below) + Zobrazit/skrýt všechna uvedená omezení z 3D zobrazení. (stejné jako zaškrtnutí/zrušení zaškrtnutí všech uvedených omezení v seznamu níže) @@ -4506,17 +4506,17 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. Show only filtered Constraints - Show only filtered Constraints + Zobrazit pouze filtrované vazby Extended information (in widget) - Extended information (in widget) + Rozšířené informace (ve widgetu) Hide internal alignment (in widget) - Hide internal alignment (in widget) + Skrýt vnitřní zarovnání (ve widgetu) @@ -4537,17 +4537,17 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. Check to toggle filters - Check to toggle filters + Zaškrtněte pro přepnutí filtrů Click to show filters - Click to show filters + Kliknutím zobrazíte filtry Filters - Filters + Filtry @@ -4593,7 +4593,7 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. Internal - Internal + Interní @@ -4971,11 +4971,12 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. %n DoF(s) - - %n Stupeň Volnosti + + %n Stupeň Volnosti(s) %n Stupně Volnosti %n Stupňů Volnosti - %n DoF(s) + One +%n DoF(s) @@ -5743,17 +5744,17 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl P&rofiles - P&rofiles + P&rofiles S&ketch - S&ketch + Z&kročit Sketcher - Sketcher + Náčrt @@ -5786,12 +5787,12 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl Creates a hexagonal profile - Creates a hexagonal profile + Vytvoří šestihranný profil Creates a hexagonal profile in the sketch - Creates a hexagonal profile in the sketch + Vytvoří šestihranný profil v náčrtu @@ -5815,12 +5816,12 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl Automatically adapt grid spacing based on the viewer dimensions. - Automatically adapt grid spacing based on the viewer dimensions. + Automaticky přizpůsobte rozteč mřížky na základě rozměrů prohlížeče. Grid Auto Spacing - Grid Auto Spacing + Automatická mezera mřížek @@ -5831,20 +5832,20 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl Distance between two subsequent grid lines. If 'Grid Auto Spacing' is enabled, will be used as base value. - Distance between two subsequent grid lines. -If 'Grid Auto Spacing' is enabled, will be used as base value. + Vzdálenost mezi dvěma následujícími čarami mřížky. +Pokud je povoleno „Automatické rozestupy mřížky“, použije se jako základní hodnota. Pixel size threshold - Pixel size threshold + Práh velikosti Pixel While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. The grid spacing change if it becomes smaller than this number of pixel. - While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. -The grid spacing change if it becomes smaller than this number of pixel. + Při použití „Automatické rozestupy mřížky“ se nastavuje práh v pixelech k rozestupu mřížky. +Rozteč mřížky se změní, pokud bude menší než tento počet pixelů. @@ -5854,22 +5855,22 @@ The grid spacing change if it becomes smaller than this number of pixel. Minor grid lines - Minor grid lines + Menší čáry mřížky Major grid lines - Major grid lines + Hlavní mřížkové čáry Major grid line every: - Major grid line every: + Hlavní linka mřížky vždy: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Každých N linek bude hlavní linka. Nastavením na 1 deaktivujete hlavní čáry. @@ -5902,12 +5903,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Line pattern used for grid division. - Line pattern used for grid division. + Model tratě použitý pro dělení mřížky. Distance between two subsequent division lines - Distance between two subsequent division lines + Vzdálenost mezi dvěma následujícími dělícími čarami @@ -5915,17 +5916,17 @@ The grid spacing change if it becomes smaller than this number of pixel. Grid Auto Spacing - Grid Auto Spacing + Automatická mezera mřížek Resize grid automatically depending on zoom. - Resize grid automatically depending on zoom. + Automaticky změnit velikost mřížky v závislosti na přiblížení. Spacing - Spacing + Mezera @@ -5951,18 +5952,18 @@ The grid spacing change if it becomes smaller than this number of pixel. The Sketch has malformed constraints! - The Sketch has malformed constraints! + Náčrt má poškozené vazby! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Náčrt má částečně nadbytečné vazby! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + Paraboly byly migrovány. Migrované soubory se v předchozích verzích FreeCADu neotevřou!! @@ -5982,12 +5983,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate B-spline - Interpolate B-spline + Interpolovat B-splajn Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Vytvoří B-splajn interpolací, tj. pomocí uzlů v náčrtu. @@ -5995,12 +5996,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate periodic B-spline - Interpolate periodic B-spline + Interpolovat periodický B-splajn Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Vytvořte periodický B-spline interpolací, tj. pomocí uzlů v náčrtu. @@ -6008,13 +6009,13 @@ The grid spacing change if it becomes smaller than this number of pixel. B-spline by knots - B-spline by knots + B-splajn uzly Create a B-spline by knots - Create a B-spline by knots + Vytvořit B-splajn uzly @@ -6022,13 +6023,13 @@ The grid spacing change if it becomes smaller than this number of pixel. Periodic B-spline by knots - Periodic B-spline by knots + Periodický B-splajn uzly Create a periodic B-spline by knots - Create a periodic B-spline by knots + Vytvořit periodický B-splajn uzly @@ -6036,34 +6037,34 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + Přichytit k objektům New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Nové body přejdou k aktuálně zvolenému objektu. Přicházejí také do středu čar a oblouků. Snap to Grid - Snap to Grid + Přichytit do mřížky New points will snap to the nearest grid line. Points must be set closer than a fifth of the grid spacing to a grid line to snap. - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid spacing to a grid line to snap. + Nové body se přesunou na nejbližší řádek mřížky. +Body musí být nastaveny blíže než pětina rozestupu mřížky k napnutí mřížky. Snap angle - Snap angle + Úhel zachytávání Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Úhlový krok pro nástroje, které používají 'Snap v úhlu' (například řádka). Podržením klávesy CTRL umožníte "zachytit v úhlu". Úhel začíná od východní osy (vodorovně vpravo) @@ -6071,12 +6072,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + Přepnout zachytávání Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Přepnout všechny funkce snapingu. V menu můžete přepnout jednotlivě 'Přichytnout na Grid', 'Přichytit k objektů' a další nastavení hlemýžďů diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 277a10d1ec..8b276561c8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Legt die Länge einer Linie, den Abstand zwischen einer Linie und einem Knotenpunkt oder zwischen zwei Kreisen fest @@ -2112,7 +2112,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Add Knot Point - Add Knot Point + Knotenpunkt hinzufügen @@ -2615,7 +2615,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Number of selected objects is not 3 - Number of selected objects is not 3 + Die Anzahl der ausgewählten Objekte ist nicht 3 @@ -5848,22 +5848,22 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Minor grid lines - Minor grid lines + Untergeordnete Rasterlinien Major grid lines - Major grid lines + Haupt-Rasterlinien Major grid line every: - Major grid line every: + Haupt-Rasterlinie alle: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Jede n-te Linie ist eine Haupt-Rasterlinie. Ein Wert von 1 deaktiviert die Haupt-Rasterlinien. @@ -5945,12 +5945,12 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< The Sketch has malformed constraints! - The Sketch has malformed constraints! + Die Skizze enthält fehlerhafte Randbedingungen! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Die Skizze enthält teilweise redundante Randbedingungen! @@ -5976,12 +5976,12 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Interpolate B-spline - Interpolate B-spline + B-Spline interpolieren Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Erstellt einen B-Spline durch Interpolation, d.h. über Knoten in der Skizze. @@ -5989,12 +5989,12 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Interpolate periodic B-spline - Interpolate periodic B-spline + Geschlossenen B-Spline interpolieren Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Erstellt einen geschlossenen B-Spline durch Interpolation, d.h. über Knoten in der Skizze. @@ -6002,13 +6002,13 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< B-spline by knots - B-spline by knots + B-Spline durch Knoten Create a B-spline by knots - Create a B-spline by knots + Erstellt einen B-Spline durch Knoten @@ -6016,13 +6016,13 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Periodic B-spline by knots - Periodic B-spline by knots + Geschlossener B-Spline durch Knoten Create a periodic B-spline by knots - Create a periodic B-spline by knots + Erstellt einen geschlossenen B-Spline durch Knoten @@ -6030,7 +6030,7 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Snap to objects - Snap to objects + An Objekte einrasten @@ -6040,7 +6040,7 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Snap to Grid - Snap to Grid + Am Gitter einrasten @@ -6065,7 +6065,7 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset Toggle Snap - Toggle Snap + Einrasten umschalten diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts index 54a115e175..a398929050 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Fija una longitud de una línea o la distancia entre una línea y un vértice o entre dos círculos @@ -592,8 +592,8 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Crea una restricción de ley de refracción (ley de Snell) entre dos extremos de los rayos +y un borde como interfaz. @@ -2113,7 +2113,7 @@ restricciones inválidas, geometrías degeneradas, etc. Add Knot Point - Add Knot Point + Añadir punto de nudo @@ -2616,7 +2616,7 @@ restricciones inválidas, geometrías degeneradas, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + El número de objetos seleccionados no es 3 @@ -2663,7 +2663,7 @@ restricciones inválidas, geometrías degeneradas, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Seleccione exactamente una línea o un punto y una línea o dos puntos o dos círculos del croquis. @@ -2856,7 +2856,7 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Seleccione un punto y varias curvas, o una curva y varios puntos. @@ -3169,22 +3169,22 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Unsupported visual layer operation - Unsupported visual layer operation + Operación de capa visual no soportada It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Actualmente no está soportado el mover la geometría externa a otra capa visual. Se omitirá la geometría externa Set knot multiplicity - Set knot multiplicity + Establecer multiplicidad del nudo Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Establece la multiplicidad del nudo en el último punto proporcionado, entre 1 y %1:Note que la multiplicidad puede ignorarse bajo ciertas circunstancias. Por favor refiérase a la documentación para detalles @@ -5853,22 +5853,22 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Minor grid lines - Minor grid lines + Líneas de cuadrícula menores Major grid lines - Major grid lines + Líneas de cuadrícula principales Major grid line every: - Major grid line every: + Línea de cuadrícula principal cada: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Cada N líneas habrá una línea principal. Establecer en 1 para desactivar las líneas principales. @@ -5950,12 +5950,12 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< The Sketch has malformed constraints! - The Sketch has malformed constraints! + ¡El croquis tiene restricciones mal formadas! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + ¡El croquis tiene restricciones parcialmente redundantes! @@ -5981,12 +5981,12 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Interpolate B-spline - Interpolate B-spline + Interpolar B-spline Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Crear una B-spline por interpolación, es decir, a través de nudos en el croquis. @@ -5994,12 +5994,12 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Interpolate periodic B-spline - Interpolate periodic B-spline + Interpolar B-spline periódica Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Crea una B-spline periódica por interpolación, es decir, a través de nudos en el croquis. @@ -6007,13 +6007,13 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< B-spline by knots - B-spline by knots + B-spline por nudos Create a B-spline by knots - Create a B-spline by knots + Crea una curva B por nudos @@ -6021,13 +6021,13 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Periodic B-spline by knots - Periodic B-spline by knots + B-spline periódica por nudos Create a periodic B-spline by knots - Create a periodic B-spline by knots + Crea una B-spline periódica por nudos @@ -6035,7 +6035,7 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Snap to objects - Snap to objects + Adherir a objetos @@ -6045,7 +6045,7 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Snap to Grid - Snap to Grid + Adherir a la cuadrícula @@ -6057,7 +6057,7 @@ Los puntos deben estar más cerca de una quinta parte del espacio de la cuadríc Snap angle - Snap angle + Adherir ángulo @@ -6070,7 +6070,7 @@ Los puntos deben estar más cerca de una quinta parte del espacio de la cuadríc Toggle Snap - Toggle Snap + Alternar Adherir diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index 2825bb3022..750b79d498 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -2114,7 +2114,7 @@ restricciones inválidas, geometrías degeneradas, etc. Add Knot Point - Add Knot Point + Añadir punto de nudo @@ -5979,12 +5979,12 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Interpolate B-spline - Interpolate B-spline + Interpolar B-spline Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Crear una B-spline por interpolación, es decir, a través de nudos en el boceto. @@ -6005,7 +6005,7 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< B-spline by knots - B-spline by knots + B-spline por nudos @@ -6033,7 +6033,7 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Snap to objects - Snap to objects + Adherir a objetos @@ -6043,7 +6043,7 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Snap to Grid - Snap to Grid + Adherir a la cuadrícula @@ -6055,7 +6055,7 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Snap angle - Snap angle + Adherir ángulo @@ -6068,7 +6068,7 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Toggle Snap - Toggle Snap + Alternar Adherir diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index 9096074e9e..773f1515b9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Finkatu lerro baten luzera edo lerro baten eta erpin baten arteko edo bi zirkuluren arteko distantzia @@ -593,8 +593,8 @@ hautatutako erpinean Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Sortu Snell-en errefrakzio-legearen murrizketa bat, izpien bi amaiera-punturen +artean eta ertz bat interfaze modura erabilita. @@ -1680,7 +1680,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Add circle to circle distance constraint - Add circle to circle distance constraint + Gehitu zirkulutik zirkulurako distantzia-murrizketa @@ -2115,7 +2115,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Add Knot Point - Add Knot Point + Gehitu adabegi-puntua @@ -2618,7 +2618,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Number of selected objects is not 3 - Number of selected objects is not 3 + Hautatutako objektuen kopurua ez da 3 @@ -2665,7 +2665,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Hautatu krokiseko lerro bat edo puntu bat eta lerro bat edo bi puntu edo bi zirkulu. @@ -2858,7 +2858,7 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Hautatu puntu bat edo kurba anitz, edo kurba bat eta puntu anitz. @@ -3171,22 +3171,22 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Unsupported visual layer operation - Unsupported visual layer operation + Ikusizko geruzan onartzen ez den eragiketa It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Momentuz ez da onartzen kanpoko geometria bat ikusizko beste geruza batera eramatea. Kanpoko geometriari ez ikusiarena egingo zaio Set knot multiplicity - Set knot multiplicity + Ezarri adabegi-aniztasuna Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Ezarri adabegi-aniztasuna emandako azken puntuan, 1 eta %1 artean: Kontuan izan aniztasunari ez ikusiarena egin ahal zaiola zenbait egoeratan. Begiratu dokumentazioa xehetasun gehiagorako @@ -5856,22 +5856,22 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. Minor grid lines - Minor grid lines + Bigarren mailako sareta-lerroak Major grid lines - Major grid lines + Sareta-lerro nagusiak Major grid line every: - Major grid line every: + Sareta-lerro nagusien maiztasuna: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + N lerrotik bat lerro nagusia izango da. Ezarri 1 lerro nagusiak desgaitzeko. @@ -5953,19 +5953,18 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. The Sketch has malformed constraints! - The Sketch has malformed constraints! + Krokisak gaizki eratutako murrizketak ditu! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Krokisak partzialki erredundanteak diren murrizketak ditu! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - + Parabolak migratu dira. Migratutako fitxategiak ezin dira ireki FreeCADen aurreko bertsioetan. @@ -5984,12 +5983,12 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. Interpolate B-spline - Interpolate B-spline + Interpolatu B-spline kurba Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Sortu B-spline bat interpolazioa erabiliz, alegia, krokiseko adabegiak erabiliz. @@ -5997,12 +5996,12 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. Interpolate periodic B-spline - Interpolate periodic B-spline + Interpolatu B-spline periodikoa Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Sortu B-spline periodiko bat interpolazioa erabiliz, alegia, krokiseko adabegiak erabiliz. @@ -6010,13 +6009,13 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. B-spline by knots - B-spline by knots + B-spline kurba adabegietatik Create a B-spline by knots - Create a B-spline by knots + Sortu B-spline bat adabegietatik abiatuz @@ -6024,13 +6023,13 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. Periodic B-spline by knots - Periodic B-spline by knots + B-spline periodikoa adabegietatik Create a periodic B-spline by knots - Create a periodic B-spline by knots + Sortu B-spline periodiko bat adabegietatik abiatuz @@ -6038,17 +6037,17 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada. Snap to objects - Snap to objects + Atxiki objektuei New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Puntu berriak aurretik hautatutako objektuari atxikiko zaizkio. Lerroen eta arkuen erdiguneari ere atxikiko zaizkie. Snap to Grid - Snap to Grid + Atxiki saretari @@ -6060,7 +6059,7 @@ Puntuak sareta-tartearen bosten bat baino hurbilago ezarri behar dira lerro bate Snap angle - Snap angle + Atxiki angeluari @@ -6073,7 +6072,7 @@ Puntuak sareta-tartearen bosten bat baino hurbilago ezarri behar dira lerro bate Toggle Snap - Toggle Snap + Txandakatu atxikitzea diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 3d42d2e98e..64e92449f6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Fixe une longueur d'une ligne ou la distance entre une ligne et un sommet ou entre deux cercles @@ -592,8 +592,7 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Crée une contrainte de réfraction (loi de Snell) entre deux extrémités de lignes et une arête en tant qu'interface. @@ -1675,7 +1674,7 @@ les contraintes invalides, les géométries dégénérées, etc. Add circle to circle distance constraint - Add circle to circle distance constraint + Ajouter une contrainte de distance entre les cercles @@ -2110,7 +2109,7 @@ les contraintes invalides, les géométries dégénérées, etc. Add Knot Point - Add Knot Point + Ajouter un point de nœud @@ -2613,7 +2612,7 @@ les contraintes invalides, les géométries dégénérées, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + Le nombre d'objets sélectionnés n'est pas 3 @@ -2660,7 +2659,7 @@ les contraintes invalides, les géométries dégénérées, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Sélectionner exactement une ligne ou un point et une ligne ou deux points ou deux cercles de l'esquisse. @@ -2853,7 +2852,7 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Sélectionner soit un point et plusieurs courbes, soit une courbe et plusieurs points. @@ -3166,22 +3165,22 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Unsupported visual layer operation - Unsupported visual layer operation + L'opération du calque visuel n'est pas prise en charge It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Il n'est pas possible pour l'instant de déplacer une géométrie externe vers une autre couche visuelle. La géométrie externe sera omise Set knot multiplicity - Set knot multiplicity + Définir la multiplicité du nœud Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Définit la multiplicité du nœud au dernier point fourni, entre 1 et %1 : remarquez que la multiplicité peut être ignorée dans certaines circonstances. Veuillez vous référer à la documentation pour plus de détails. @@ -5846,22 +5845,22 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Minor grid lines - Minor grid lines + Lignes mineures de la grille Major grid lines - Major grid lines + Lignes majeures de la grille Major grid line every: - Major grid line every: + Ligne principale de la grille tous les : Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Toutes les N lignes, il y aura une ligne principale. La valeur 1 permet de désactiver les lignes principales. @@ -5943,18 +5942,18 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p The Sketch has malformed constraints! - The Sketch has malformed constraints! + L'esquisse a des contraintes malformées ! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + L'esquisse a des contraintes partiellement redondantes ! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + Les paraboles ont été migrées. Les fichiers migrés ne pourront pas être ouverts par les versions précédentes de FreeCAD !! @@ -5974,12 +5973,12 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Interpolate B-spline - Interpolate B-spline + Interpoler une B-spline Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Créer une B-spline par interpolation, c'est-à-dire par l'intermédiaire de nœuds dans l'esquisse. @@ -5987,12 +5986,12 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Interpolate periodic B-spline - Interpolate periodic B-spline + Interpoler une B-spline périodique Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Créer une B-spline périodique par interpolation, c'est-à-dire par l'intermédiaire de nœuds dans l'esquisse. @@ -6000,13 +5999,13 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p B-spline by knots - B-spline by knots + B-spline par des noeuds Create a B-spline by knots - Create a B-spline by knots + Créer une B-spline par des noeuds @@ -6014,13 +6013,13 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Periodic B-spline by knots - Periodic B-spline by knots + B-spline périodique par des noeuds Create a periodic B-spline by knots - Create a periodic B-spline by knots + Créer une B-spline périodique par des noeuds @@ -6028,17 +6027,17 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Snap to objects - Snap to objects + Aimanter aux objets New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Les nouveaux points s'aimanteront à l'objet présélectionné. Ils s'aimanteront également au milieu des lignes et des arcs. Snap to Grid - Snap to Grid + Aligner sur la grille @@ -6050,12 +6049,12 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la Snap angle - Snap angle + Aimanter à l'angle Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Pas angulaire pour les outils qui utilisent la fonction "Aimanter à l'angle" (ligne par exemple). Maintenez la touche CTRL enfoncée pour activer la fonction "Aimanter à l'angle". L'angle commence à partir de l'axe Est (horizontal droit). @@ -6063,12 +6062,12 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la Toggle Snap - Toggle Snap + Activer/désactiver l'aimantation Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Activer/désactiver toutes les fonctionnalités d'aimantation. Dans le menu, vous pouvez activer individuellement les fonctions "Aimanter à la grille", "Aimanter aux objets" et d'autres paramètres d'aimantation. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index 32f09fea27..539c0ff8da 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Vonal hosszának rögzítése vagy adott távolság tartása két kör között @@ -592,8 +592,7 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Hozzon létre egy fénytörés törvény (Snellius-törvény) kényszerítést sugarak két végpontja között és egy élt mint határfelületet. @@ -1678,7 +1677,7 @@ invalid constraints, degenerated geometry, etc. Add circle to circle distance constraint - Add circle to circle distance constraint + Kör hozzáadása a kör távolsági kényszerítéséhez @@ -2113,7 +2112,7 @@ invalid constraints, degenerated geometry, etc. Add Knot Point - Add Knot Point + Csomópont hozzáadása @@ -2616,7 +2615,7 @@ invalid constraints, degenerated geometry, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + A kijelölt tárgyak száma nem 3 @@ -2663,7 +2662,7 @@ invalid constraints, degenerated geometry, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Válasszon ki pontosan egy vonalat vagy egy pontot és egy vonalat vagy két pontot vagy két kört a vázlatból. @@ -2856,7 +2855,7 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Válasszon ki egy pontot és több görbét, vagy egy görbét és több pontot. @@ -3169,22 +3168,22 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Unsupported visual layer operation - Unsupported visual layer operation + Nem támogatott vizuális réteg művelet It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Jelenleg nem támogatott a külső geometria áthelyezése egy másik vizuális rétegre. A külső geometria kimarad Set knot multiplicity - Set knot multiplicity + Csomó szorzatának beállítása Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Állítsa be a csomó szorzatát az utolsó megadott ponton, 1 és %1 között:Vegye figyelembe, hogy a szorzatot bizonyos körülmények között figyelmen kívül lehet hagyni.A részleteket lásd a dokumentációban @@ -3245,7 +3244,7 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Coincident - Coincident + Egybeeső @@ -5852,22 +5851,22 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Minor grid lines - Minor grid lines + Kisebb rácsvonalak Major grid lines - Major grid lines + Fő rácsvonalak Major grid line every: - Major grid line every: + Minden nagyobb rácsvonal: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Minden N vonalon lesz egy fővonal. A nagyobb vonalak letiltásához állítsa 1-re. @@ -5949,18 +5948,18 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. The Sketch has malformed constraints! - The Sketch has malformed constraints! + A vázlat hibásan formázott kényszerítéseket tartalmaz! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + A vázlat részlegesen felesleges kényszerítéseket tartalmaz! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + A parabolákat áttelepítették. Az áttelepített fájlok nem nyílnak meg a FreeCAD korábbi verzióiban!! @@ -5980,12 +5979,12 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Interpolate B-spline - Interpolate B-spline + B-görbe interpoláció Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Hozzon létre egy B-görbét interpolációval, azaz a vázlatban lévő csomókon keresztül. @@ -5993,12 +5992,12 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Interpolate periodic B-spline - Interpolate periodic B-spline + Interpolálja a periodikus B-görbét Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Hozzon létre egy periodikus B-görbét interpolációval, azaz a vázlatban lévő csomókon keresztül. @@ -6006,13 +6005,13 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. B-spline by knots - B-spline by knots + B-görbe csomópontokkal Create a B-spline by knots - Create a B-spline by knots + Létrehoz egy B-görbét csomópontokkal @@ -6020,13 +6019,13 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Periodic B-spline by knots - Periodic B-spline by knots + Időszakos B-görbe csomópontokkal Create a periodic B-spline by knots - Create a periodic B-spline by knots + Létrehoz egy időszakos B-görbét csomópontokkal @@ -6034,17 +6033,17 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Snap to objects - Snap to objects + Tárgyhoz illeszt New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Az új pontok az aktuálisan előzetesen kiválasztott tárgyhoz illeszkednek. A vonalak és ívek közepére is illeszt. Snap to Grid - Snap to Grid + Rácshoz illeszt @@ -6056,12 +6055,12 @@ A pontokat a rácsháló távolságának egyötödénél közelebb kell állíta Snap angle - Snap angle + Szög illesztés Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Szög lépés a 'Szög illesztés' funkciót használó eszközökhöz (például vonal). Tartsa lenyomva a CTRL billentyűt a 'Szög illesztés' engedélyezéséhez. A szög a keleti tengelytől indul (vízszintesen jobbra) @@ -6069,12 +6068,12 @@ A pontokat a rácsháló távolságának egyötödénél közelebb kell állíta Toggle Snap - Toggle Snap + Illesztés kapcsoló Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Az összes illesztési funkció bekapcsolása. A menüben külön-külön kapcsolhatja a 'Rácshoz illeszt', a 'Tárgyhoz illeszt' és a további beállításokat diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts index 68f956337e..1be7db7f12 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts @@ -69,12 +69,12 @@ CmdSketcherCarbonCopy - + Carbon copy Carbon copy - + Copies the geometry of another sketch Salinan geometri sketsa lainnya @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Kendalikan radius - + Constrain diameter Constrain diameter - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -169,23 +169,23 @@ CmdSketcherCompCreateArc - + Create arc Create arc - + Create an arc in the sketcher Buat busur di sketsa & quot; "terjemahan =" Indonesia "> sketcher - + Center and end points Pusat dan titik akhir - + End points and rim point Titik akhir dan titik pelek @@ -193,12 +193,12 @@ CmdSketcherCompCreateBSpline - + Create a B-spline Buat B-spline - + Create a B-spline in the sketch Buat B-spline di sketsa @@ -206,23 +206,23 @@ CmdSketcherCompCreateCircle - + Create circle Buat lingkaran - + Create a circle in the sketcher Buat lingkaran dalam & quot; sketsa & quot; "terjemahan =" bahasa indonesia "> sketsa - + Center and rim point Pusat dan titik pelek - + 3 rim points 3 titik pelek @@ -230,37 +230,37 @@ CmdSketcherCompCreateConic - + Create a conic Buat sebuah kerucut - + Create a conic in the sketch Buat kerucut di sketsa - + Ellipse by center, major radius, point Elips oleh pusat, radius utama, titik - + Ellipse by periapsis, apoapsis, minor radius Ellipse by periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints Arc elips oleh pusat, radius utama, titik akhir - + Arc of hyperbola by center, major radius, endpoints Arc hiperbola oleh pusat, radius utama, titik akhir - + Arc of parabola by focus, vertex, endpoints Busur parabola dengan fokus, simpul, titik akhir @@ -268,22 +268,22 @@ CmdSketcherCompCreateFillets - + Fillets Fillets - + Create a fillet between two lines Create a fillet between two lines - + Sketch fillet Sketch fillet - + Constraint-preserving sketch fillet Constraint-preserving sketch fillet @@ -291,27 +291,27 @@ CmdSketcherCompCreateRectangles - + Create rectangles Create rectangles - + Creates a rectangle in the sketch Creates a rectangle in the sketch - + Rectangle Empat persegi panjang - + Centered rectangle Centered rectangle - + Rounded rectangle Rounded rectangle @@ -319,47 +319,47 @@ CmdSketcherCompCreateRegularPolygon - + Create regular polygon Buat poligon biasa - + Create a regular polygon in the sketcher Membuat poligon beraturan di sketcher - + Triangle Segi tiga - + Square Kotak - + Pentagon Segi lima - + Hexagon Segi enam - + Heptagon Segi tujuh - + Octagon Segi delapan - + Regular polygon Poligon beraturan @@ -390,12 +390,12 @@ CmdSketcherConstrainAngle - + Constrain angle Kendalikan sudut - + Fix the angle of a line or the angle between two lines Perbaiki sudut garis atau sudut antara dua garis @@ -403,12 +403,12 @@ CmdSketcherConstrainBlock - + Constrain block Constrain block - + Block constraint: block the selected edge from moving Block constraint: block the selected edge from moving @@ -416,12 +416,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Kendala bertepatan - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -429,12 +429,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -442,25 +442,25 @@ CmdSketcherConstrainDistance - + Constrain distance Kendalikan jarak - - Fix a length of a line or the distance between a line and a vertex - Perbaiki panjang garis atau jarak antara garis dan simpul + + Fix a length of a line or the distance between a line and a vertex or between two circles + Fix a length of a line or the distance between a line and a vertex or between two circles CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Perbaiki jarak horizontal antara dua titik atau garis ujung @@ -468,12 +468,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Perbaiki jarak vertikal antara dua titik atau garis ujung @@ -481,12 +481,12 @@ CmdSketcherConstrainEqual - + Constrain equal Kendalikan sama - + Create an equality constraint between two lines or between circles and arcs Buat batasan kesetaraan antara dua garis atau antara lingkaran dan busur @@ -494,38 +494,25 @@ CmdSketcherConstrainHorizontal - + Constrain horizontally Kendalikan secara horisontal - + Create a horizontal constraint on the selected item Buat kendala horizontal pada item yang dipilih - - CmdSketcherConstrainInternalAlignment - - - Constrain internal alignment - Constrain internal alignment - - - - Constrains an element to be aligned with the internal geometry of another element - Kendalikan elemen yang harus disesuaikan dengan geometri internal elemen lain - - CmdSketcherConstrainLock - + Constrain lock Kendalikan kunci - + Lock constraint: create both a horizontal and a vertical distance constraint on the selected vertex Lock constraint: create both a horizontal and a vertical distance constraint @@ -535,12 +522,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Kendalikan sejajar - + Create a parallel constraint between two lines Buat batasan paralel antara dua baris @@ -548,12 +535,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Kendalikan tegak lurus - + Create a perpendicular constraint between two lines Buat kendala tegak lurus antara dua garis @@ -561,12 +548,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Konstruksikan titik ke objek - + Fix a point onto an object Perbaiki sebuah titik pada sebuah objek @@ -574,12 +561,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -587,12 +574,12 @@ on the selected vertex CmdSketcherConstrainRadius - + Constrain radius or weight Constrain radius or weight - + Fix the radius of a circle or an arc or fix the weight of a pole of a B-Spline Fix the radius of a circle or an arc or fix the weight of a pole of a B-Spline @@ -600,27 +587,27 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law') Membekukan refraksi (hukum Snell ') - - Create a refraction law (Snell's law) constraint between two endpoints of rays + + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law) constraint between two endpoints of rays + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Konstruksikan simetris - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points @@ -630,12 +617,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Kendalikan singgung - + Create a tangent constraint between two entities Buat kendala singgung antara dua entitas @@ -643,12 +630,12 @@ with respect to a line or a third point CmdSketcherConstrainVertical - + Constrain vertically Kendalikan secara vertikal - + Create a vertical constraint on the selected item Buat kendala vertikal pada item yang dipilih @@ -669,12 +656,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Salinan - + Creates a simple copy of the geometry taking as reference the last selected point Membuat salinan geometri sederhana sebagai referensi titik terakhir yang dipilih @@ -682,12 +669,12 @@ with respect to a line or a third point CmdSketcherCreate3PointArc - + Create arc by three points Buat busur dengan tiga titik - + Create an arc by its end points and a point along the arc Buat busur dengan titik ujungnya dan satu titik di sepanjang busur @@ -695,12 +682,12 @@ with respect to a line or a third point CmdSketcherCreate3PointCircle - + Create circle by three points Buat lingkaran dengan tiga titik - + Create a circle by 3 perimeter points Buat lingkaran dengan 3 titik perimeter @@ -708,12 +695,12 @@ with respect to a line or a third point CmdSketcherCreateArc - + Create arc by center Buat lingkaran dengan 3 titik perimeter - + Create an arc by its center and by its end points Buat busur dengan pusatnya dan pada titik ujungnya @@ -721,12 +708,12 @@ with respect to a line or a third point CmdSketcherCreateArcOfEllipse - + Create an arc of ellipse Buat busur elips - + Create an arc of ellipse in the sketch Buat busur elips di sketsa @@ -734,12 +721,12 @@ with respect to a line or a third point CmdSketcherCreateArcOfHyperbola - + Create an arc of hyperbola Buat busur hiperbola - + Create an arc of hyperbola in the sketch Buat busur hiperbola di sketsa @@ -747,12 +734,12 @@ with respect to a line or a third point CmdSketcherCreateArcOfParabola - + Create an arc of parabola Buat busur parabola - + Create an arc of parabola in the sketch Buat busur parabola di sketsa @@ -760,12 +747,12 @@ with respect to a line or a third point CmdSketcherCreateBSpline - + Create B-spline Buat B-spline - + Create a B-spline via control points in the sketch. Buat B-spline melalui titik kontrol pada sketsa. @@ -773,12 +760,12 @@ with respect to a line or a third point CmdSketcherCreateCircle - + Create circle Buat lingkaran - + Create a circle in the sketch Buat B-spline lewat titik kontrol pada sketsa @@ -786,12 +773,12 @@ with respect to a line or a third point CmdSketcherCreateEllipseBy3Points - + Create ellipse by 3 points Buat elips dengan 3 poin - + Create an ellipse by 3 points in the sketch Buat elips dengan 3 poin pada sketsa @@ -799,12 +786,12 @@ with respect to a line or a third point CmdSketcherCreateEllipseByCenter - + Create ellipse by center Buat elips menurut pusat - + Create an ellipse by center in the sketch Buat elips dengan pusat di sketsa @@ -812,12 +799,12 @@ with respect to a line or a third point CmdSketcherCreateFillet - + Create fillet Buat fillet - + Create a fillet between two lines or at a coincident point Create a fillet between two lines or at a coincident point @@ -825,12 +812,12 @@ with respect to a line or a third point CmdSketcherCreateHeptagon - + Create heptagon Buat heptagon - + Create a heptagon in the sketch Buat heptagon di sketsa @@ -838,12 +825,12 @@ with respect to a line or a third point CmdSketcherCreateHexagon - + Create hexagon Buat segi enam - + Create a hexagon in the sketch Buat segi enam di sketsa @@ -851,12 +838,12 @@ with respect to a line or a third point CmdSketcherCreateLine - + Create line Buat baris - + Create a line in the sketch Create a line in the sketch @@ -864,12 +851,12 @@ with respect to a line or a third point CmdSketcherCreateOblong - + Create rounded rectangle Create rounded rectangle - + Create a rounded rectangle in the sketch Create a rounded rectangle in the sketch @@ -877,12 +864,12 @@ with respect to a line or a third point CmdSketcherCreateOctagon - + Create octagon Buat oktagon - + Create an octagon in the sketch Buat oktagon di sketsa @@ -890,12 +877,12 @@ with respect to a line or a third point CmdSketcherCreatePentagon - + Create pentagon Buat pentagon - + Create a pentagon in the sketch Buat pentagon di sketsa @@ -903,12 +890,12 @@ with respect to a line or a third point CmdSketcherCreatePeriodicBSpline - + Create periodic B-spline Buat B-spline periodik - + Create a periodic B-spline via control points in the sketch. Create a periodic B-spline via control points in the sketch. @@ -916,12 +903,12 @@ with respect to a line or a third point CmdSketcherCreatePoint - + Create point Buat titik - + Create a point in the sketch Buat sebuah titik di sketsa @@ -929,12 +916,12 @@ with respect to a line or a third point CmdSketcherCreatePointFillet - + Create corner-preserving fillet Create corner-preserving fillet - + Fillet that preserves intersection point and most constraints Fillet that preserves intersection point and most constraints @@ -942,12 +929,12 @@ with respect to a line or a third point CmdSketcherCreatePolyline - + Create polyline Buat polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour Create a polyline in the sketch. 'M' Key cycles behaviour @@ -955,12 +942,12 @@ with respect to a line or a third point CmdSketcherCreateRectangle - + Create rectangle Buat persegi panjang - + Create a rectangle in the sketch Buat persegi panjang di sketsa @@ -968,12 +955,12 @@ with respect to a line or a third point CmdSketcherCreateRectangleCenter - + Create centered rectangle Create centered rectangle - + Create a centered rectangle in the sketch Create a centered rectangle in the sketch @@ -981,12 +968,12 @@ with respect to a line or a third point CmdSketcherCreateRegularPolygon - + Create regular polygon Buat poligon biasa - + Create a regular polygon in the sketch Membuat poligon beraturan di sketch @@ -994,12 +981,12 @@ with respect to a line or a third point CmdSketcherCreateSlot - + Create slot Buat slot - + Create a slot in the sketch Buat slot di sketsa @@ -1007,12 +994,12 @@ with respect to a line or a third point CmdSketcherCreateSquare - + Create square Buat kuadrat - + Create a square in the sketch Buat kotak di sketsa @@ -1020,12 +1007,12 @@ with respect to a line or a third point CmdSketcherCreateTriangle - + Create equilateral triangle Buat segitiga sama sisi - + Create an equilateral triangle in the sketch Buat segitiga sama sisi dalam sketsa @@ -1059,12 +1046,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Delete all constraints - + Delete all constraints in the sketch Delete all constraints in the sketch @@ -1072,12 +1059,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1085,12 +1072,12 @@ with respect to a line or a third point CmdSketcherEditSketch - + Edit sketch Edit sketch - + Edit the selected sketch. Edit the selected sketch. @@ -1098,12 +1085,12 @@ with respect to a line or a third point CmdSketcherExtend - + Extend edge Perluas tepi - + Extend an edge with respect to the picked position Perluas keunggulan sehubungan dengan posisi yang dipetik @@ -1111,12 +1098,12 @@ with respect to a line or a third point CmdSketcherExternal - + External geometry Geometri eksternal - + Create an edge linked to an external geometry Buat tepi yang terhubung dengan geometri eksternal @@ -1176,12 +1163,12 @@ with respect to a line or a third point CmdSketcherLeaveSketch - + Leave sketch Tinggalkan sketsa - + Finish editing the active sketch. Finish editing the active sketch. @@ -1189,12 +1176,12 @@ with respect to a line or a third point CmdSketcherMapSketch - + Map sketch to face... Sketsa peta untuk menghadapi ... - + Set the 'Support' of a sketch. First select the supporting geometry, for example, a face or an edge of a solid object, then call this command, then choose the desired sketch. @@ -1203,7 +1190,7 @@ First select the supporting geometry, for example, a face or an edge of a solid then call this command, then choose the desired sketch. - + Some of the selected objects depend on the sketch to be mapped. Circular dependencies are not allowed. Some of the selected objects depend on the sketch to be mapped. Circular dependencies are not allowed. @@ -1211,22 +1198,22 @@ then call this command, then choose the desired sketch. CmdSketcherMergeSketches - + Merge sketches Gabungkan sketsa - + Create a new sketch from merging two or more selected sketches. Create a new sketch from merging two or more selected sketches. - + Wrong selection Pilihan salah - + Select at least two sketches. Select at least two sketches. @@ -1234,12 +1221,12 @@ then call this command, then choose the desired sketch. CmdSketcherMirrorSketch - + Mirror sketch Cermin sketsa - + Create a new mirrored sketch for each selected sketch by using the X or Y axes, or the origin point, as mirroring reference. @@ -1248,12 +1235,12 @@ by using the X or Y axes, or the origin point, as mirroring reference. - + Wrong selection Pilihan salah - + Select one or more sketches. Select one or more sketches. @@ -1261,12 +1248,12 @@ as mirroring reference. CmdSketcherMove - + Move Pindah - + Moves the geometry taking as reference the last selected point Moves the geometry taking as reference the last selected point @@ -1274,12 +1261,12 @@ as mirroring reference. CmdSketcherNewSketch - + Create sketch Buat sketsa - + Create a new sketch. Create a new sketch. @@ -1287,12 +1274,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1300,12 +1287,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1313,12 +1300,12 @@ as mirroring reference. CmdSketcherReorientSketch - + Reorient sketch... Sketsa reorientasi - + Place the selected sketch on one of the global coordinate planes. This will clear the 'Support' property, if any. Place the selected sketch on one of the global coordinate planes. @@ -1328,12 +1315,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Tampilkan / sembunyikan geometri internal - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1341,8 +1328,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - - + + Select conflicting constraints Select conflicting constraints @@ -1355,7 +1342,7 @@ This will clear the 'Support' property, if any. Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1363,12 +1350,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1376,12 +1363,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1389,12 +1376,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Select horizontal axis - + Select the local horizontal axis of the sketch Select the local horizontal axis of the sketch @@ -1402,8 +1389,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - - + + Select malformed constraints Select malformed constraints @@ -1411,12 +1398,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Select the local origin point of the sketch @@ -1424,8 +1411,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - - + + Select partially redundant constraints Select partially redundant constraints @@ -1433,8 +1420,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - - + + Select redundant constraints Select redundant constraints @@ -1442,12 +1429,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Select vertical axis - + Select the local vertical axis of the sketch Select the local vertical axis of the sketch @@ -1455,12 +1442,12 @@ This will clear the 'Support' property, if any. CmdSketcherSplit - + Split edge Split edge - + Splits an edge into two while preserving constraints Splits an edge into two while preserving constraints @@ -1468,12 +1455,12 @@ This will clear the 'Support' property, if any. CmdSketcherStopOperation - + Stop operation Stop operation - + When in edit mode, stop the active operation (drawing, constraining, etc.). When in edit mode, stop the active operation (drawing, constraining, etc.). @@ -1494,12 +1481,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Simetri - + Creates symmetric geometry with respect to the last selected line or point Membuat geometri simetris berkenaan dengan garis atau titik yang terakhir dipilih @@ -1507,12 +1494,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Activates or deactivates the selected constraints @@ -1533,12 +1520,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1548,12 +1535,12 @@ into driving or reference mode CmdSketcherTrimming - + Trim edge Trim tepi - + Trim an edge with respect to the picked position Potong tepi dengan memperhatikan posisi yang dipetik @@ -1561,24 +1548,24 @@ into driving or reference mode CmdSketcherValidateSketch - + Validate sketch... Validasi sketsa... - + Validate a sketch by looking at missing coincidences, invalid constraints, degenerated geometry, etc. Validate a sketch by looking at missing coincidences, invalid constraints, degenerated geometry, etc. - + Wrong selection Pilihan salah - + Select only one sketch. Select only one sketch. @@ -1586,12 +1573,12 @@ invalid constraints, degenerated geometry, etc. CmdSketcherViewSection - + View section View section - + When in edit mode, switch between section view and full view. When in edit mode, switch between section view and full view. @@ -1599,12 +1586,12 @@ invalid constraints, degenerated geometry, etc. CmdSketcherViewSketch - + View sketch Lihat sketsa - + When in edit mode, set the camera orientation perpendicular to the sketch plane. When in edit mode, set the camera orientation perpendicular to the sketch plane. @@ -1612,282 +1599,282 @@ invalid constraints, degenerated geometry, etc. Command - - + + Add horizontal constraint Add horizontal constraint - - - + + + Add horizontal alignment Add horizontal alignment - - + + Add vertical constraint Add vertical constraint - + Add vertical alignment Add vertical alignment - + Add 'Lock' constraint Add 'Lock' constraint - + Add relative 'Lock' constraint Add relative 'Lock' constraint - + Add fixed constraint Add fixed constraint - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - - + + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + + Add circle to circle distance constraint + Add circle to circle distance constraint + + + + Add length constraint Add length constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Add perpendicular constraint - + Add perpendicularity constraint Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - - - + + + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - - - Add internal alignment constraint - Add internal alignment constraint - - - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint - + Create a new sketch on a face Create a new sketch on a face - + Create a new sketch Buat sketsa baru - + Reorient sketch Reorient sketch - + Attach sketch Attach sketch - + Detach sketch Detach sketch - + Create a mirrored sketch for each selected sketch Create a mirrored sketch for each selected sketch - + Merge sketches Gabungkan sketsa @@ -1897,7 +1884,7 @@ invalid constraints, degenerated geometry, etc. Toggle draft from/to draft - + Add sketch line Add sketch line @@ -1927,8 +1914,8 @@ invalid constraints, degenerated geometry, etc. Add arc to sketch wire - - + + Add sketch arc Add sketch arc @@ -1939,12 +1926,12 @@ invalid constraints, degenerated geometry, etc. Add sketch circle - + Add sketch ellipse Add sketch ellipse - + Add sketch arc of ellipse Add sketch arc of ellipse @@ -1985,7 +1972,7 @@ invalid constraints, degenerated geometry, etc. Perluas tepi - + Split edge Split edge @@ -2040,42 +2027,42 @@ invalid constraints, degenerated geometry, etc. Insert knot - + Join Curves Join Curves - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Copy/clone/move geometry - + Create copy of geometry Create copy of geometry - + Delete all geometry Delete all geometry - + Delete All Constraints Delete All Constraints - + Remove Axes Alignment Remove Axes Alignment @@ -2093,7 +2080,7 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2108,30 +2095,35 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag Constraint Drag Constraint - + Modify sketch constraints Modify sketch constraints + + + Add Knot Point + Add Knot Point + CommandGroup - + Sketcher Sketcher @@ -2149,84 +2141,84 @@ invalid constraints, degenerated geometry, etc. Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. - + Autoconstrain error: Unsolvable sketch while applying equality constraints. Autoconstrain error: Unsolvable sketch while applying equality constraints. - + Autoconstrain error: Unsolvable sketch without constraints. Autoconstrain error: Unsolvable sketch without constraints. - + Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. - + Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. - + Autoconstrain error: Unsolvable sketch after applying equality constraints. Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - - + + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Bspline GeoId berada di luar batas. - - + + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indeks simpul berada di luar batas. Perhatikan bahwa sesuai dengan notasi OCC, simpul pertama memiliki indeks 1 dan bukan nol. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Multiplisitas tidak dapat ditingkatkan melampaui tingkat b-spline. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC tidak dapat mengurangi multiplisitas dalam toleransi maksimum. - + Knot cannot have zero multiplicity. Knot cannot have zero multiplicity. - + Knot multiplicity cannot be higher than the degree of the BSpline. Knot multiplicity cannot be higher than the degree of the BSpline. - + Knot cannot be inserted outside the BSpline parameter range. Knot cannot be inserted outside the BSpline parameter range. @@ -2242,189 +2234,61 @@ invalid constraints, degenerated geometry, etc. QObject - - + + + Sketcher Sketcher - + There are no modes that accept the selected set of subelements Tidak ada mode yang menerima dipilih set dari subelements - + Broken link to support subelements Tautan rusak untuk mendukung subelemen - - + + Unexpected error Kesalahan tak terduga - + Face is non-planar Wajah tidak planar - + Selected shapes are of wrong form (e.g., a curved edge where a straight one is needed) Bentuk yang dipilih memiliki bentuk yang salah (misalnya, tepi melengkung yang lurus dibutuhkan) - + Sketch mapping Pemetaan sketsa - + Can't map the sketch to selected object. %1. Tidak dapat memetakan sketsa ke objek yang dipilih . % 1 . - - + + Don't attach Jangan pasang + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -2433,25 +2297,147 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Pilihan salah @@ -2472,152 +2458,152 @@ invalid constraints, degenerated geometry, etc. Tidak diizinkan untuk mengedit datum karena sketsa berisi kendala yang bertentangan - + Dimensional constraint Batasan dimensi - + Cannot add a constraint between two external geometries. Cannot add a constraint between two external geometries. - + Cannot add a constraint between two fixed geometries. Fixed geometries include external geometry, blocked geometry, and special points such as B-spline knot points. Cannot add a constraint between two fixed geometries. Fixed geometries include external geometry, blocked geometry, and special points such as B-spline knot points. - + Sketcher Constraint Substitution Sketcher Constraint Substitution - + Keep notifying me of constraint substitutions Keep notifying me of constraint substitutions - - - + + + Only sketch and its support are allowed to be selected. Only sketch and its support are allowed to be selected. - + One of the selected has to be on the sketch. One of the selected has to be on the sketch. - - + + Select an edge from the sketch. Pilih tepi dari sketsa. - - - + + + - - - - - - - - + + + + + + + + - - + + Impossible constraint Kendala yang tidak mungkin - - - - + + + + The selected edge is not a line segment. The selected edge is not a line segment. - - - - - - + + + + + + Double constraint Kendala ganda - - - - + + + + + The selected edge already has a horizontal constraint! The selected edge already has a horizontal constraint! - - - - + + + The selected edge already has a vertical constraint! The selected edge already has a vertical constraint! - - - - - + + + + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! The dipilih item (s) tidak dapat menerima horisontal kendala ! - + There are more than one fixed points selected. Select a maximum of one fixed point! There are more than one fixed points selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! Dipilih item (s) tidak dapat menerima vertikal kendala! - - - + + + Select vertices from the sketch. Pilih simpul dari para sketsa . - + Select one vertex from the sketch other than the origin. Pilih salah satu titik dari satu sketsa selain asal . - + Select only vertices from the sketch. The last selected vertex may be the origin. Pilih hanya simpul dari para sketsa . Yang terakhir dipilih vertex mungkin asal . - + Wrong solver status Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. @@ -2627,180 +2613,173 @@ invalid constraints, degenerated geometry, etc. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - - - - - - - + + Number of selected objects is not 3 + Number of selected objects is not 3 + + - + Error Kesalahan - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select two or more points from the sketch. Pilih dua atau lebih poin dari para sketsa . - + Select two or more vertices from the sketch. Select two or more vertices from the sketch. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - - + Select exactly one line or one point and one line or two points from the sketch. Pilih tepat satu baris atau satu titik dan satu garis atau dua poin dari para sketsa . - + Cannot add a length constraint on an axis! Tidak dapat menambahkan batasan panjang pada sumbu! - + + + Select exactly one line or one point and one line or two points or two circles from the sketch. + Select exactly one line or one point and one line or two points or two circles from the sketch. + + + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - - + + + + + + + Select the right things from the sketch. Pilih hal yang benar dari yang sketsa . - - - Point on B-spline edge currently unsupported. - Arahkan ke tepi B-spline yang saat ini tidak didukung. - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - - Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - Pilih salah satu titik dan beberapa kurva, atau satu kurva dan beberapa titik. Anda telah memilih kurva % 1 dan % 2 poin. - - - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Tak satu pun dari titik-titik yang dipilih dibatasi ke masing-masing kurva, entah karena mereka adalah bagian dari elemen yang sama, atau karena keduanya adalah geometri eksternal . - - - - + + + + Select exactly one line or up to two points from the sketch. Pilih tepat satu baris atau sampai dengan dua poin dari para sketsa . - + Cannot add a horizontal length constraint on an axis! Tidak dapat menambahkan batasan panjang horizontal pada sumbu! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Tidak dapat menambahkan batasan panjang vertikal pada sumbu! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Pilih dua atau lebih baris dari para sketsa . - - + + Select at least two lines from the sketch. Pilih setidaknya dua baris dari para sketsa . - + Select a valid line. Select a valid line. - - + + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2808,55 +2787,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. perpendicular constraint Pilih beberapa geometri dari para sketsa . - - Wrong number of selected objects! - perpendicular constraint. - Salah jumlah objek terpilih ! - - - - - With 3 objects, there must be 2 curves and 1 point. - tangent constraint - Dengan 3 objek, harus ada 2 kurva dan 1 titik . - - - - + + Cannot add a perpendicularity constraint at an unconnected point! Tidak dapat menambahkan batasan tegak lurus pada titik yang tidak terhubung ! - - - + + + Perpendicular to B-spline edge currently unsupported. Perpendicular ke tepi B-spline saat ini tidak didukung. - - + + One of the selected edges should be a line. Salah satu tepi yang dipilih harus berupa garis . - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2864,243 +2830,179 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. tangent constraint Pilih beberapa geometri dari para sketsa . - - Wrong number of selected objects! - tangent constraint - Salah jumlah objek terpilih ! - - - - - + + + Cannot add a tangency constraint at an unconnected point! Tidak dapat menambahkan kendala singgung pada titik yang tidak terhubung ! - - - + + + Tangent constraint at B-spline knot is only supported with lines! + Tangent constraint at B-spline knot is only supported with lines! + + + + B-spline knot to endpoint tangency was applied instead. + B-spline knot to endpoint tangency was applied instead. + + + + Select either one point and several curves, or one curve and several points. + Select either one point and several curves, or one curve and several points. + + + + + Wrong number of selected objects! + Salah jumlah objek terpilih ! + + + + + With 3 objects, there must be 2 curves and 1 point. + Dengan 3 objek, harus ada 2 kurva dan 1 titik . + + + + + Tangency to B-spline edge currently unsupported. Tangensi ke tepi B-spline saat ini tidak didukung. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Pilih satu atau lebih busur atau lingkaran dari para sketsa . - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. Kendala hanya berlaku untuk busur atau lingkaran. - - Select an edge that is not a B-spline weight - Select an edge that is not a B-spline weight - - - - + + Select one or two lines from the sketch. Or select two edges and a point. Pilih satu atau dua baris dari para sketsa . Atau pilih dua sisi dan satu titik . - - + + Parallel lines Garis sejajar - - + + An angle constraint cannot be set for two parallel lines. Kendala sudut tidak dapat diatur untuk dua garis sejajar. - + Cannot add an angle constraint on an axis! Tidak dapat menambahkan batasan sudut pada sumbu! - + Select two edges from the sketch. Pilih dua sisi dari satu sketsa . - - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Kesetaraan untuk tepi B-spline saat ini tidak didukung. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Pilih dua poin dan simetri garis , dua poin dan simetri titik atau garis dan simetri titik dari yang sketsa . - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Tidak dapat menambahkan batasan simetri antara garis dan titik akhirnya! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Objek yang dipilih bukan hanya geometri dari satu sketsa . - - Number of selected objects is not 3 (is %1). - Jumlah objek yang dipilih tidak 3 (adalah % 1 ). - - - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. - + SnellsLaw on B-spline edge is currently unsupported. SnellsLaw on B-spline edge is currently unsupported. - - - Select at least one ellipse and one edge from the sketch. - Pilih setidaknya satu elips dan satu ujung dari satu sketsa . - - - - Sketch axes cannot be used in internal alignment constraint. - Sketch axes cannot be used in internal alignment constraint. - - - - You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. - You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. - - - - - Maximum 2 points are supported. - Maksimal 2 poin didukung. - - - - - Maximum 2 lines are supported. - Maksimum 2 baris didukung. - - - - - Nothing to constrain - Nothing to constrain - - - - - Currently all internal geometrical elements of the ellipse are already exposed. - Currently all internal geometrical elements of the ellipse are already exposed. - - - - - - - Extra elements - Elemen ekstra - - - - - - More elements than possible for the given ellipse were provided. These were ignored. - Lebih banyak elemen daripada yang mungkin diberikan pada elips yang diberikan. Ini diabaikan. - - - - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - - - - You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - - - - More elements than possible for the given arc of ellipse were provided. These were ignored. - Elemen lebih dari mungkin untuk diberikan busur elips disediakan. Ini diabaikan. - - - - Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - Saat ini geometri internal hanya didukung elips atau busur elips. Elemen pilihan terakhir harus berupa elips atau busur elips. - - - - - - - + + + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3112,19 +3014,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Pilih kendala (s) dari para sketsa . - + B-Spline Degree B-Spline Degree - + Define B-Spline Degree, between 1 and %1: Define B-Spline Degree, between 1 and %1: + - CAD Kernel Error Kernel CAD Error @@ -3159,7 +3061,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Selection is empty Selection is empty @@ -3174,106 +3076,116 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Please select a b-spline curve to insert a knot (not a knot on it). If the curve is not a b-spline, please convert it into one first. - - Wrong OCE/OCC version - Wrong OCE/OCC version - - - - This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher - This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher - - - + Nothing is selected. Please select end points of curves. Nothing is selected. Please select end points of curves. - + Too many curves on point Too many curves on point - - + + Exactly two curve should end at the selected point to be able to join them. Exactly two curve should end at the selected point to be able to join them. - + Too few curves on point Too few curves on point - + Two end points, or coincident point should be selected. Two end points, or coincident point should be selected. - - - - - - - - - - + + + + + + + + + + Select elements from a single sketch. Pilih elemen dari satu sketsa . - + No constraint selected Tidak ada batasan yang dipilih - + At least one constraint must be selected Setidaknya satu kendala harus dipilih - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Konstruksi simetris membutuhkan setidaknya dua elemen geometris, elemen geometris terakhir menjadi referensi untuk konstruksi simetri . - + The last element must be a point or a line serving as reference for the symmetry construction. Unsur terakhir harus menjadi titik atau garis yang berfungsi sebagai acuan untuk konstruksi simetri . - - + + A copy requires at least one selected non-external geometric element Salinan memerlukan setidaknya satu elemen geometrik non-eksternal yang dipilih - + Delete All Geometry Menghapus semua geometri - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Delete All Constraints - + Are you really sure you want to delete all the constraints? Are you really sure you want to delete all the constraints? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element + + + Unsupported visual layer operation + Unsupported visual layer operation + + + + It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + + + + Set knot multiplicity + Set knot multiplicity + + + + Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + SketcherGui::CarbonCopySelection @@ -3378,7 +3290,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Block - Block + Memblokir @@ -3579,12 +3491,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - + Refractive index ratio Rasio indeks bias - + Ratio n2/n1: Rasio n2 / n1: @@ -3592,72 +3504,72 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ElementFilterList - + Normal Normal - + Construction Konstruksi - + Internal Internal - + External External - + All types All types - + Point Titik - + Line Garis - + Circle Lingkaran - + Ellipse Elips - + Arc of circle Arc of circle - + Arc of ellipse Arc of ellipse - + Arc of hyperbola Arc of hyperbola - + Arc of parabola Arc of parabola - + B-Spline B-Spline @@ -3665,7 +3577,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ElementView - + + Layer + Layer + + + Delete Menghapus @@ -3861,30 +3778,6 @@ reflected on copies Klon - - SketcherGui::SketcherGeneralWidget - - - - - Normal Geometry - Geometri Normal - - - - - - Construction Geometry - Geometri Konstruksi - - - - - - External Geometry - Geometri Eksternal - - SketcherGui::SketcherRegularPolygonDialog @@ -3907,88 +3800,71 @@ reflected on copies SketcherGui::SketcherSettings - + General Umum - - Sketcher - Sketcher - - - + Sketcher dialog will have additional section 'Advanced solver control' to adjust solver settings Sketcher dialog will have additional section 'Advanced solver control' to adjust solver settings - + Task Panel Widgets Task Panel Widgets - + Show section 'Advanced solver control' Show section 'Advanced solver control' - - Sketcher dialog will have additional section -'Edit controls' to easily access basic settings. - Sketcher dialog will have additional section -'Edit controls' to easily access basic settings. - - - - Show section 'Edit controls' - Show section 'Edit controls' - - - + Dragging performance Dragging performance - + Special solver algorithm will be used while dragging sketch elements. Requires to re-enter edit mode to take effect. Special solver algorithm will be used while dragging sketch elements. Requires to re-enter edit mode to take effect. - + Improve solving while dragging Improve solving while dragging - + New constraints that would be redundant will automatically be removed New constraints that would be redundant will automatically be removed - + Auto remove redundants Auto remove redundants - + Allow to leave sketch edit mode when pressing Esc button Allow to leave sketch edit mode when pressing Esc button - + Esc can leave sketch edit mode Esc can leave sketch edit mode - + Notifies about automatic constraint substitutions Notifies about automatic constraint substitutions - + Notify automatic constraint substitutions Notify automatic constraint substitutions @@ -4259,16 +4135,6 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - - - Grid line pattern - Pola garis grid - - - - Line pattern used for grid lines. - Line pattern used for grid lines. - Segments per geometry @@ -4280,17 +4146,17 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'.The number of polygons used for geometry approximation. - + Cursor position coordinates will be displayed beside cursor while editing sketch. Cursor position coordinates will be displayed beside cursor while editing sketch. - + A dialog will pop up to input a value for new dimensional constraints. A dialog will pop up to input a value for new dimensional constraints. - + Ask for value after creating a dimensional constraint Ask for value after creating a dimensional constraint @@ -4305,12 +4171,12 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'.Geometry creation "Continue Mode" - + The current constraint creation tool will remain active after creation. The current constraint creation tool will remain active after creation. - + Constraint creation "Continue Mode" Constraint creation "Continue Mode" @@ -4348,111 +4214,111 @@ Defaults to: %N = %V %V - dimension value - + Show coordinates beside cursor while editing Show coordinates beside cursor while editing - + Cursor coordinates will use the system decimals setting instead of the short form. Cursor coordinates will use the system decimals setting instead of the short form. - + Use system decimals setting for cursor coordinates Use system decimals setting for cursor coordinates - + Visibility automation Visibilitas otomasi - + When opening a sketch, hide all features that depend on it. When opening a sketch, hide all features that depend on it. - + Hide all objects that depend on the sketch Sembunyikan semua benda yang tergantung pada sketsa - + When opening a sketch, show sources for external geometry links. When opening a sketch, show sources for external geometry links. - + Show objects used for external geometry Tampilkan objek yang digunakan untuk geometri eksternal - + When opening a sketch, show objects the sketch is attached to. When opening a sketch, show objects the sketch is attached to. - + Show objects that the sketch is attached to Show objects that the sketch is attached to - + When closing a sketch, move camera back to where it was before the sketch was opened. When closing a sketch, move camera back to where it was before the sketch was opened. - + Restore camera position after editing Kembalikan posisi kamera setelah pengeditan - + When entering edit mode, force orthographic view of camera. Works only when "Restore camera position after editing" is enabled. When entering edit mode, force orthographic view of camera. Works only when "Restore camera position after editing" is enabled. - + Force orthographic camera when entering edit Force orthographic camera when entering edit - + Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - + Open sketch in Section View mode Open sketch in Section View mode - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - + Applies current visibility automation settings to all sketches in open documents. Applies current visibility automation settings to all sketches in open documents. - + Apply to existing sketches Terapkan pada sketsa yang ada - + Unexpected C++ exception Pengecualian C ++ tak terduga - + Sketcher Sketcher @@ -4460,55 +4326,55 @@ Then objects are only visible behind the sketch plane. SketcherGui::SketcherValidation - + No missing coincidences Tidak ada kebetulan yang hilang - + No missing coincidences found Tidak ada kebetulan yang hilang ditemukan - + Missing coincidences Kebetulan tidak ada - + %1 missing coincidences found %1 Kebetulan ditemukan hilang - + No invalid constraints Tidak ada batasan yang tidak valid - + No invalid constraints found Tidak ada kendala yang tidak valid ditemukan - + Invalid constraints Kendala tidak valid - + Invalid constraints found Kendala tidak ditemukan - - - - + + + + Reversed external geometry Membalikkan geometri eksternal - + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. %2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). @@ -4521,71 +4387,71 @@ Click "Swap endpoints in constraints" button to reassign endpoints. Do this only Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15 - + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. However, no constraints linking to the endpoints were found. %1 busur geometri eksternal terbalik ditemukan. Titik akhir mereka dikepung dalam tampilan 3d . Namun, tidak ada kendala yang terkait dengan titik akhir yang ditemukan. - + No reversed external-geometry arcs were found. Tidak ditemukan busur geometri eksternal terbalik. - + %1 changes were made to constraints linking to endpoints of reversed arcs. %1 perubahan dilakukan pada batasan yang menghubungkan ke titik akhir busur terbalik. - - + + Constraint orientation locking Kendala penguncian orientasi - + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). - + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Note that for all future constraints, the locking still defaults to ON. Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Note that for all future constraints, the locking still defaults to ON. - - + + Delete constraints to external geom. Hapus kendala pada geom eksternal. - + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? Anda akan menghapus SEMUA kendala yang berhubungan dengan geometri eksternal . Ini berguna untuk menyelamatkan sketsa dengan link yang rusak / berubah ke geometri eksternal . Anda yakin ingin menghapus batasannya? - + All constraints that deal with external geometry were deleted. Semua kendala yang berhubungan dengan geometri eksternal telah dihapus. - + No degenerated geometry No degenerated geometry - + No degenerated geometry found No degenerated geometry found - + Degenerated geometry Degenerated geometry - + %1 degenerated geometry found %1 degenerated geometry found @@ -4628,27 +4494,27 @@ However, no constraints linking to the endpoints were found. Constraints - + Auto constraints Kendala otomatis - + Auto remove redundants Auto remove redundants - + Show only filtered Constraints Show only filtered Constraints - + Extended information (in widget) Extended information (in widget) - + Hide internal alignment (in widget) Hide internal alignment (in widget) @@ -4689,201 +4555,141 @@ However, no constraints linking to the endpoints were found. Setelan - - - - - - - - - - + + + + + + + + + + Construction Konstruksi - + Elements Elemen - - - - + + + + Point Titik - - - - - - - - - - + + + + + + + + + + Internal Internal - - - - + + + + Line Garis - - - - + + + + Arc Busur - - - - + + + + Circle Lingkaran - - - - + + + + Ellipse Elips - - - - + + + + Elliptical Arc Busur elips - - - - + + + + Hyperbolic Arc Busur hiperbolik - - - - + + + + Parabolic Arc Busur parabola - - - - + + + + BSpline BSpline - - - - + + + + Other Lain - + Extended information Extended information - - SketcherGui::TaskSketcherGeneral - - - Form - Bentuk - - - - A grid will be shown - A grid will be shown - - - - Grid - Kisi - - - - Distance between two subsequent grid lines - Distance between two subsequent grid lines - - - - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid size to a grid line to snap. - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid size to a grid line to snap. - - - - Grid snap - Grid sekejap - - - - Sketcher proposes automatically sensible constraints. - Sketcher proposes automatically sensible constraints. - - - - Auto constraints - Kendala otomatis - - - - Sketcher tries not to propose redundant auto constraints - Sketcher tries not to propose redundant auto constraints - - - - Avoid redundant auto constraints - Hindari kendala mobil yang berlebihan - - - - Rendering order (global): - Rendering order (global): - - - - To change, drag and drop a geometry type to top or bottom - To change, drag and drop a geometry type to top or bottom - - - - Edit controls - Edit controls - - SketcherGui::TaskSketcherMessages - + Solver messages Pesan solver + + + Auto update + Auto update + + + + Executes a recomputation of active document after every sketch action + Executes a recomputation of active document after every sketch action + SketcherGui::TaskSketcherSolverAdvanced @@ -5058,119 +4864,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sketsa tidak valid - + Do you want to open the sketch validation tool? Apakah Anda ingin membuka alat validasi sketsa ? - + The sketch is invalid and cannot be edited. sketsa tidak valid dan tidak dapat diedit. - + Please remove the following constraint: Harap hapus batasan berikut : - + Please remove at least one of the following constraints: Harap hapus setidaknya satu dari batasan berikut: - + Please remove the following redundant constraint: Harap hapus batasan berlebihan berikut ini : - + Please remove the following redundant constraints: Harap hapus batasan berlebihan berikut ini : - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Sketsa kosong - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) - + Fully constrained Fully constrained @@ -5241,8 +5047,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -5250,17 +5056,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Klon - + Copy Salinan - + Move Pindah @@ -5268,8 +5074,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -5277,7 +5083,7 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5285,8 +5091,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Perbaiki jari-jari lingkaran atau busur @@ -5294,7 +5100,7 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstraintRadiam - + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5302,8 +5108,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Membuat salinan geometri sederhana sebagai referensi titik terakhir yang dipilih @@ -5311,8 +5117,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Create3PointArc - + Create an arc by its end points and a point along the arc Buat busur dengan titik ujungnya dan satu titik di sepanjang busur @@ -5320,8 +5126,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points Buat lingkaran dengan 3 titik pelek @@ -5329,8 +5135,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateArc - + Create an arc by its center and by its end points Buat busur dengan pusatnya dan pada titik ujungnya @@ -5338,8 +5144,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateArcOfEllipse - + Create an arc of ellipse by its center, major radius, and endpoints Create an arc of ellipse by its center, major radius, and endpoints @@ -5347,8 +5153,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateArcOfHyperbola - + Create an arc of hyperbola by its center, major radius, and endpoints Create an arc of hyperbola by its center, major radius, and endpoints @@ -5356,8 +5162,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateArcOfParabola - + Create an arc of parabola by its focus, vertex, and endpoints Create an arc of parabola by its focus, vertex, and endpoints @@ -5365,13 +5171,13 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateBSpline - + B-spline by control points B-spline oleh titik kontrol - - + + Create a B-spline by control points Buat B-spline oleh titik kontrol @@ -5379,8 +5185,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point Buat lingkaran di bagian tengahnya dan dengan titik pelek @@ -5388,8 +5194,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateEllipseBy3Points - + Create a ellipse by periapsis, apoapsis, and minor radius Buat elips dengan periapsis, apoapsis, dan jari-jari kecil @@ -5397,8 +5203,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateEllipseByCenter - + Create an ellipse by center, major radius and point Buat elips berdasarkan pusat, jari-jari dan titik utama @@ -5406,8 +5212,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateFillet - - + + Creates a radius between two lines Creates a radius between two lines @@ -5415,8 +5221,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner Buat heptagon oleh pusatnya dan di satu sudut @@ -5424,8 +5230,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner Buat segi enam dengan pusatnya dan di satu sudut @@ -5433,7 +5239,7 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateOblong - + Create a rounded rectangle Create a rounded rectangle @@ -5441,14 +5247,14 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner Buat sebuah oktagon di tengahnya dan di satu sudut - - + + Create a regular polygon by its center and by one corner Create a regular polygon by its center and by one corner @@ -5456,8 +5262,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner Buat pentagon di tengahnya dan di satu sudut @@ -5465,8 +5271,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreatePointFillet - - + + Fillet that preserves constraints and intersection point Fillet that preserves constraints and intersection point @@ -5474,7 +5280,7 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateRectangle - + Create a rectangle Create a rectangle @@ -5482,7 +5288,7 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateRectangle_Center - + Create a centered rectangle Create a centered rectangle @@ -5490,8 +5296,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateSquare - - + + Create a square by its center and by one corner Buat persegi di tengahnya dan di salah satu sudut @@ -5499,8 +5305,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner Buat segitiga sama sisi dengan pusatnya dan di satu sudut @@ -5508,13 +5314,13 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points B-spline periodik dengan titik kontrol - - + + Create a periodic B-spline by control points Buat B-spline periodik dengan titik kontrol @@ -5522,64 +5328,64 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_MapSketch - + No sketch found Tidak ada sketsa yang ditemukan - + The document doesn't have a sketch dokumen tidak memiliki sketsa - + Select sketch Pilih sketsa - + Select a sketch from the list Pilih sketsa dari daftar - + (incompatible with selection) (tidak sesuai dengan pilihan) - + (current) (arus) - + (suggested) (disarankan) - + Sketch attachment Lampiran sketsa - + Current attachment mode is incompatible with the new selection. Select the method to attach this sketch to selected objects. Current attachment mode is incompatible with the new selection. Select the method to attach this sketch to selected objects. - + Select the method to attach this sketch to selected objects. Pilih metode untuk melampirkan sketsa ini ke objek yang dipilih . - + Map sketch Sketsa peta - + Can't map a sketch to support: %1 Tidak dapat memetakan sketsa untuk mendukung: @@ -5589,8 +5395,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Moves the geometry taking as reference the last selected point @@ -5598,12 +5404,12 @@ Select the method to attach this sketch to selected objects. Sketcher_NewSketch - + Sketch attachment Lampiran sketsa - + Select the method to attach this sketch to selected object Pilih metode untuk melampirkan sketsa ini ke objek yang dipilih @@ -5611,12 +5417,12 @@ Select the method to attach this sketch to selected objects. Sketcher_ReorientSketch - + Sketch has support Sketsa memiliki dukungan - + Sketch with a support face cannot be reoriented. Do you want to detach it from the support? Sketsa dengan wajah pendukung tidak bisa diorientasikan ulang. Apakah Anda ingin melepaskannya dari dukungan? @@ -5630,45 +5436,20 @@ Do you want to detach it from the support? Bentuk - + DOF DOF - + Link Link - - New constraints that would be redundant will automatically be removed - New constraints that would be redundant will automatically be removed - - - - Auto remove redundants - Auto remove redundants - - - - Executes a recomputation of active document after every sketch action - Executes a recomputation of active document after every sketch action - - - - Auto update - Auto update - - - + Forces recomputation of active document Forces recomputation of active document - - - Update - Memperbarui - TaskSketcherSolverAdvanced @@ -5949,7 +5730,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -5957,44 +5738,342 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Workbench - + P&rofiles P&rofiles - + S&ketch S&ketch - + Sketcher Sketcher - + Sketcher geometries Geometri sketcher - + Sketcher constraints Kendala sketcher - + Sketcher tools Alat sketcher - + Sketcher B-spline tools Sketcher B-spline tools - + Sketcher virtual space Sketcher virtual space + + Sketcher_ProfilesHexagon1 + + + Creates a hexagonal profile + Creates a hexagonal profile + + + + Creates a hexagonal profile in the sketch + Creates a hexagonal profile in the sketch + + + + SketcherGui::SketcherSettingsGrid + + + + Grid + Kisi + + + + Grid settings + Grid settings + + + + A grid will be shown + A grid will be shown + + + + Automatically adapt grid spacing based on the viewer dimensions. + Automatically adapt grid spacing based on the viewer dimensions. + + + + Grid Auto Spacing + Grid Auto Spacing + + + + Grid spacing + Jarak kisi + + + + Distance between two subsequent grid lines. +If 'Grid Auto Spacing' is enabled, will be used as base value. + Distance between two subsequent grid lines. +If 'Grid Auto Spacing' is enabled, will be used as base value. + + + + Pixel size threshold + Pixel size threshold + + + + While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. +The grid spacing change if it becomes smaller than this number of pixel. + While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. +The grid spacing change if it becomes smaller than this number of pixel. + + + + Grid display + Grid display + + + + Minor grid lines + Minor grid lines + + + + Major grid lines + Major grid lines + + + + Major grid line every: + Major grid line every: + + + + Every N lines there will be a major line. Set to 1 to disable major lines. + Every N lines there will be a major line. Set to 1 to disable major lines. + + + + + Line pattern + Line pattern + + + + Line pattern used for grid lines. + Line pattern used for grid lines. + + + + + Line width + Lebar garis + + + + Distance between two subsequent grid lines + Distance between two subsequent grid lines + + + + + Line color + Line warna + + + + Line pattern used for grid division. + Line pattern used for grid division. + + + + Distance between two subsequent division lines + Distance between two subsequent division lines + + + + GridSpaceAction + + + Grid Auto Spacing + Grid Auto Spacing + + + + Resize grid automatically depending on zoom. + Resize grid automatically depending on zoom. + + + + Spacing + Spacing + + + + Distance between two subsequent grid lines + Distance between two subsequent grid lines + + + + CmdSketcherGrid + + + Activate Grid + Activate Grid + + + + Activate grid and grid settings + Activate grid and grid settings + + + + Notifications + + + The Sketch has malformed constraints! + The Sketch has malformed constraints! + + + + The Sketch has partially redundant constraints! + The Sketch has partially redundant constraints! + + + + Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + + Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + + + + + + + + + + + Error + Kesalahan + + + + CmdSketcherCreateBSplineByInterpolation + + + Interpolate B-spline + Interpolate B-spline + + + + Create a B-spline by interpolation, i.e. via knots in the sketch. + Create a B-spline by interpolation, i.e. via knots in the sketch. + + + + CmdSketcherCreatePeriodicBSplineByInterpolation + + + Interpolate periodic B-spline + Interpolate periodic B-spline + + + + Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + + + + Sketcher_CreateBSplineByInterpolation + + + B-spline by knots + B-spline by knots + + + + + Create a B-spline by knots + Create a B-spline by knots + + + + Sketcher_Create_Periodic_BSplineByInterpolation + + + Periodic B-spline by knots + Periodic B-spline by knots + + + + + Create a periodic B-spline by knots + Create a periodic B-spline by knots + + + + SnapSpaceAction + + + Snap to objects + Snap to objects + + + + New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + + + + Snap to Grid + Snap to Grid + + + + New points will snap to the nearest grid line. +Points must be set closer than a fifth of the grid spacing to a grid line to snap. + New points will snap to the nearest grid line. +Points must be set closer than a fifth of the grid spacing to a grid line to snap. + + + + Snap angle + Snap angle + + + + Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + + + + CmdSketcherSnap + + + Toggle Snap + Toggle Snap + + + + Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index af4b1ba755..31f18921a2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -421,7 +421,7 @@ Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses - Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses + 点間の一致拘束、または円、円弧、楕円の間の同心拘束を作成 @@ -1148,12 +1148,12 @@ with respect to a line or a third point Join curves - Join curves + 曲線を結合 Join two curves at selected end points - Join two curves at selected end points + 選択した端点で2曲線を結合 @@ -2021,7 +2021,7 @@ invalid constraints, degenerated geometry, etc. Join Curves - Join Curves + 曲線を結合 @@ -2109,7 +2109,7 @@ invalid constraints, degenerated geometry, etc. Add Knot Point - Add Knot Point + ノット点を追加 @@ -2638,12 +2638,12 @@ invalid constraints, degenerated geometry, etc. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + スケッチから一致拘束のための複数の頂点、または同心拘束のための複数の円、楕円、円弧、楕円弧を選択してください。 Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + スケッチから一致拘束のための2頂点、または同心拘束のための2つの円、楕円、円弧、楕円弧を選択してください。 @@ -3085,7 +3085,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Exactly two curve should end at the selected point to be able to join them. - Exactly two curve should end at the selected point to be able to join them. + 結合するには2曲線の端点だけが選択されている必要があります。 @@ -3522,7 +3522,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c All types - All types + 全てのタイプ @@ -3547,27 +3547,27 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc of circle - Arc of circle + 円弧 Arc of ellipse - Arc of ellipse + 楕円弧 Arc of hyperbola - Arc of hyperbola + 双曲線弧 Arc of parabola - Arc of parabola + 放物線弧 B-Spline - B-Spline + B-スプライン曲線 @@ -4207,7 +4207,7 @@ Defaults to: %N = %V Show coordinates beside cursor while editing - Show coordinates beside cursor while editing + 編集中にカーソルの横に座標を表示 @@ -4459,17 +4459,17 @@ However, no constraints linking to the endpoints were found. Check to toggle filters - Check to toggle filters + クリックしてフィルターを切り替え Click to show filters - Click to show filters + クリックしてフィルターを表示 Filters - Filters + フィルター @@ -4530,17 +4530,17 @@ However, no constraints linking to the endpoints were found. Check to toggle filters - Check to toggle filters + クリックしてフィルターを切り替え Click to show filters - Click to show filters + クリックしてフィルターを表示 Filters - Filters + フィルター @@ -5773,12 +5773,12 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Creates a hexagonal profile - Creates a hexagonal profile + 六角形のプロファイルを作成 Creates a hexagonal profile in the sketch - Creates a hexagonal profile in the sketch + スケッチに六角形のプロファイルを作成 @@ -5792,7 +5792,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Grid settings - Grid settings + グリッドの設定 @@ -5802,12 +5802,12 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Automatically adapt grid spacing based on the viewer dimensions. - Automatically adapt grid spacing based on the viewer dimensions. + ビューアー寸法に基づいてグリッド間隔を自動調整 Grid Auto Spacing - Grid Auto Spacing + グリッド間隔を自動調整 @@ -5818,45 +5818,45 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster Distance between two subsequent grid lines. If 'Grid Auto Spacing' is enabled, will be used as base value. - Distance between two subsequent grid lines. -If 'Grid Auto Spacing' is enabled, will be used as base value. + 後続の2つのグリッド線間の距離。 +「グリッド間隔を自動調整」が有効になっている場合、基本値として使用されます。 Pixel size threshold - Pixel size threshold + ピクセルサイズのしきい値 While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. The grid spacing change if it becomes smaller than this number of pixel. - While using 'Grid Auto Spacing' this sets a threshold in pixel to the grid spacing. -The grid spacing change if it becomes smaller than this number of pixel. + 「グリッド間隔を自動調整」を使用すると、グリッド間隔にピクセル単位のしきい値が設定されます。 +このピクセル数より小さくなるとグリッド間隔が変化します。 Grid display - Grid display + グリッド表示 Minor grid lines - Minor grid lines + 補助グリッド線 Major grid lines - Major grid lines + 主グリッド線 Major grid line every: - Major grid line every: + 主グリッド線の間隔: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + N本の線ごとに主線が引かれます。1に設定すると主線を無効にします。 @@ -5889,12 +5889,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Line pattern used for grid division. - Line pattern used for grid division. + グリッド分割に使用される線種 Distance between two subsequent division lines - Distance between two subsequent division lines + 後続の2つの分割線間の距離 @@ -5902,17 +5902,17 @@ The grid spacing change if it becomes smaller than this number of pixel. Grid Auto Spacing - Grid Auto Spacing + グリッド間隔を自動調整 Resize grid automatically depending on zoom. - Resize grid automatically depending on zoom. + ズームに応じてグリッドのサイズを自動変更 Spacing - Spacing + 間隔 @@ -5925,12 +5925,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Activate Grid - Activate Grid + グリッドを有効にする Activate grid and grid settings - Activate grid and grid settings + グリッドとグリッド設定を有効にする @@ -6023,7 +6023,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + オブジェクトにスナップ @@ -6033,24 +6033,24 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to Grid - Snap to Grid + グリッドにスナップ New points will snap to the nearest grid line. Points must be set closer than a fifth of the grid spacing to a grid line to snap. - New points will snap to the nearest grid line. -Points must be set closer than a fifth of the grid spacing to a grid line to snap. + 新しい点は最も近いグリッド線にスナップします。 +点はスナップするグリッド線のグリッド間隔の5分の1より近くなければなりません。 Snap angle - Snap angle + スナップ角度 Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + 「角度でスナップ」（例えば線）を使用するツールの角度ステップ。 CTRLキーを押していると「角度でスナップ」が有効になります。角度は東向きの軸（水平線の右方向）から開始します。 @@ -6058,12 +6058,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + スナップの切り替え Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + すべてのスナップ機能を切り替えます。メニューで個別に「グリッドにスナップ」、「オブジェクトにスナップ」、その他のスナップ設定を切り替えられます。 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts index a973a8fbe9..e36d62fbd9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + დააყენეთ ხაზის სიგრძე ან მანძილი ხაზსა და წვეროს ან ორ წრეწირს შორის @@ -593,8 +593,7 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + სხივების ორ ბოლო წერტილსა და წიბოს, როგორც საკონტაქტო ზედაპირს შორის გარდატეხის კანონის (სნელის კანონი) შეზღუდვის შექმნა. @@ -1679,7 +1678,7 @@ invalid constraints, degenerated geometry, etc. Add circle to circle distance constraint - Add circle to circle distance constraint + წრეწირიდან წრეწირამდე მანძილის შეზღუდვის დამატება @@ -2114,7 +2113,7 @@ invalid constraints, degenerated geometry, etc. Add Knot Point - Add Knot Point + კვანძის წერტილის დამატება @@ -2617,7 +2616,7 @@ invalid constraints, degenerated geometry, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + მონიშნული ობიექტების რიცხვი არ უდრის სამს @@ -2643,12 +2642,12 @@ invalid constraints, degenerated geometry, etc. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + დამთხვევის შეზღუდვისთვის ესკიზიდან აირჩიეთ ორი წვერო ან მეტი წვერო, ან, კონცენტრული შეზღუდვისთვის, ორი ან მეტი წრეწირი, ოვალები, რკალები ან ოვალის რკალები. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. + დამთხვევის შეზღუდვისთვის ესკიზიდან აირჩიეთ ორი წვერო, ან, კონცენტრული შეზღუდვისთვის, ორი წრეწირი, ოვალები, რკალები ან ოვალის რკალები. @@ -2664,7 +2663,7 @@ invalid constraints, degenerated geometry, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + ესკიზიდან აირჩიეთ მხოლოდ ერთი ხაზი ან ერთი წერტილი და ერთი ხაზი ან ორი წერტილი ან ორი წრეწირი. @@ -2857,7 +2856,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + აირჩიეთ ან ერთი წერტილი და რამდენიმე მრუდი ან ერთ მრუდი და რამდენიმე წერტილი. @@ -3170,22 +3169,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unsupported visual layer operation - Unsupported visual layer operation + მხარდაუჭერელი ვიზუალური ფენის ოპერაცია It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + გარე გეომეტრიის სხვა ვიზუალურ ფენაზე გადატანა ამჟამად მხარდაჭერილი არაა. გარე გეომეტრია გამოტოვებული იქნება Set knot multiplicity - Set knot multiplicity + კვანძის გაყოფადობის დაყენება Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + კვანძის გაყოფადობა ბოლო მითითებულ წერტილთან, 1-სა და %1-ს შორის:დაიმახსოვრეთ, რომ გაყოფადობა ზოგიერთ გარემოებაში შეიძლება იგნორირებული იყოს. დეტალებისთვის იხილეთ დოკუმენტაცია @@ -4131,8 +4130,8 @@ Requires to re-enter edit mode to take effect. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - Base length units will not be displayed in constraints or cursor coordinates. -Supports all unit systems except 'US customary' and 'Building US/Euro'. + საზომი ერთეულები შეზღუდვებში და კურსორის კოორდნატებში ნაჩვენები არ ქნება. +გააჩნია ყველა საზომი ერთეულის მხარდაჭერა, გარდა "US საბაჟო" და "სამშენებლო აშშ/ევრო"-ის. @@ -5854,22 +5853,22 @@ The grid spacing change if it becomes smaller than this number of pixel. Minor grid lines - Minor grid lines + დამხმარე ბადის ხაზები Major grid lines - Major grid lines + ძირითადი ბადის ხაზები Major grid line every: - Major grid line every: + ძირითადი ბადის ხაზი ყოველ: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + ყოველი N ხაზში იქნება მთავარი ხაზი. დააყენეთ 1, რომ გამორთოთ ძირითადი ხაზები. @@ -5951,18 +5950,18 @@ The grid spacing change if it becomes smaller than this number of pixel. The Sketch has malformed constraints! - The Sketch has malformed constraints! + ესკიზი არასწორ შეზღუდვებს შეიცავს! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + ესკიზი ნაწილობრივ დამატებით შეზღუდვებს შეიცავს! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + პარაბოლები მიგრირებულია. მიგრირებული ფაილები FreeCAD-ის წინა ვერსიებში არ გაიხსნება!! @@ -5982,12 +5981,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate B-spline - Interpolate B-spline + B-სპლაინის ინტერპოლაცია Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + B-სპლაინების შექმნა ინტერპოლაციით, ანუ, ესკიზში არსებული კვანძებით. @@ -5995,12 +5994,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate periodic B-spline - Interpolate periodic B-spline + პერიოდული B-სპლაინის ინტერპოლაცია Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + პერიოდული B-სპლაინების შექმნა ინტერპოლაციით, ანუ, ესკიზში არსებული კვანძებით. @@ -6008,13 +6007,13 @@ The grid spacing change if it becomes smaller than this number of pixel. B-spline by knots - B-spline by knots + B-სპლაინი კვანძებით Create a B-spline by knots - Create a B-spline by knots + B-სპლაინის კვანძებით შექმნა @@ -6022,13 +6021,13 @@ The grid spacing change if it becomes smaller than this number of pixel. Periodic B-spline by knots - Periodic B-spline by knots + პერიოდული B-სპლაინი კვანძებით Create a periodic B-spline by knots - Create a periodic B-spline by knots + კვანძებით პერიოდული B-სპლაინის შექმნა @@ -6036,17 +6035,17 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + ობიექტებზე მიბმა New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + ახალი წერტლები ამჟამად წინასწარ არჩეულ ობიექტს მიემაგრება. ის ასევე მიემაგრება ხაზის შუა ადგილებს და რკალებს. Snap to Grid - Snap to Grid + ბადეზე მიმაგრება @@ -6058,12 +6057,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Snap angle - Snap angle + მიბმის კუთხე Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + კუთხური ბიჯი ხელსაწყოებისთვის, როლებიც 'კუთხით მიმაგრებას' იყენებენ (მაგალითად, ხაზი). 'კუთხურად მიმაგრებისთვის' CTRL ღილაკი გეჭიროთ. კუთხე აღმოსავლეთი ღერძიდან (ჰორიზონტალური მარჯვენა) იწყება @@ -6071,12 +6070,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + მიბმის გადართვა Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + მიბმის ყველა ფუნქციონალის გადართვა. 'ბადეზე მიბმა', 'ობიექტებზე მიბმა და სხვა მიბმის პარამეტრები მენიუში შეგიძლიათ სათითაოდ გადართოთ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index 37d613df35..3ccca39119 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -5857,7 +5857,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Minor grid lines - Minor grid lines + Kleine rasterlijnen @@ -6039,7 +6039,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + Uitlijnen op objecten @@ -6049,7 +6049,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to Grid - Snap to Grid + Uitlijnen op raster @@ -6074,7 +6074,7 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + Schakel uitlijnen diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index c727ec9089..6e9d959df9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Ustal długość linii lub odległość między linią a wierzchołkiem lub między dwoma okręgami @@ -593,8 +593,8 @@ na wybranym wierzchołku Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Utwórz wiązanie refrakcji (prawo Snella) pomiędzy dwoma punktami końcowymi promieni +oraz krawędź jako interfejs. @@ -1680,7 +1680,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Add circle to circle distance constraint - Add circle to circle distance constraint + Dodaj wiązanie odległości okręgu do okręgu @@ -2115,7 +2115,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Add Knot Point - Add Knot Point + Dodaj punkt węzła @@ -2618,7 +2618,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Number of selected objects is not 3 - Number of selected objects is not 3 + Liczba wybranych obiektów nie jest równa 3 @@ -2665,7 +2665,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Wybierz ze szkicu dokładnie jedną linię lub jeden punkt i jedną linię lub dwa punkty lub dwa okręgi. @@ -2858,7 +2858,7 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Wybierz albo jeden punkt i kilka krzywych, albo jedną krzywą i kilka punktów. @@ -3171,22 +3171,22 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Unsupported visual layer operation - Unsupported visual layer operation + Nieobsługiwana operacja warstw wizualnych It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Obecnie nie jest obsługiwane przenoszenie geometrii zewnętrznej do innej warstwy wizualnej. Geometria zewnętrzna zostanie pominięta Set knot multiplicity - Set knot multiplicity + Ustaw wielokrotność węzła Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Ustaw krotność węzła w ostatnim podanym punkcie, pomiędzy 1 a %1:Uwaga, krotność może być ignorowana w pewnych okolicznościach. Szczegóły można znaleźć w dokumentacji @@ -5857,22 +5857,22 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Minor grid lines - Minor grid lines + Mniejsze linie siatki Major grid lines - Major grid lines + Główne linie siatki Major grid line every: - Major grid line every: + Główna linia siatki co: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Co N linii będzie linia główna. Ustaw wartość na 1, aby wyłączyć linie główne. @@ -5954,19 +5954,18 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p The Sketch has malformed constraints! - The Sketch has malformed constraints! + Szkic zawiera zniekształcone wiązania! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Szkic zawiera częściowo zbędne wiązania! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - + Parabole zostały poddane migracji. Pliki po imporcie nie otworzą się w poprzednich wersjach programu FreeCAD!! @@ -5985,12 +5984,12 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Interpolate B-spline - Interpolate B-spline + Interpoluj krzywą złożoną Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Utwórz krzywą złożona przez interpolację, czyli przez węzły w szkicu. @@ -5998,12 +5997,12 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Interpolate periodic B-spline - Interpolate periodic B-spline + Utwórz okresową krzywą złożoną Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Utwórz okresową krzywą złożona przez interpolację, czyli przez węzły w szkicu. @@ -6011,13 +6010,13 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p B-spline by knots - B-spline by knots + Krzywa złożona przez węzły Create a B-spline by knots - Create a B-spline by knots + Utwórz krzywą złożoną przez węzły @@ -6025,13 +6024,13 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Periodic B-spline by knots - Periodic B-spline by knots + Okresowa krzywa złożona przez węzły Create a periodic B-spline by knots - Create a periodic B-spline by knots + Utwórz okresową krzywą złożoną za pomocą węzłów @@ -6039,17 +6038,17 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Snap to objects - Snap to objects + Przyciągnij do obiektów New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Nowe punkty będą przyciągane do aktualnie wybranego obiektu. Przyciągają się również do środka linii i łuków. Snap to Grid - Snap to Grid + Przyciągaj do siatki @@ -6061,12 +6060,13 @@ Punkty muszą być ustawione bliżej niż jedna piąta odstępu między liniami Snap angle - Snap angle + Przyciągaj do kąta Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Krok kąta dla narzędzi, które używają "Przyciągania do kąta" (na przykład linia). +Przytrzymaj CTRL, aby włączyć "Przyciąganie do kąta". Kąt zaczyna się od osi wschodniej (poziomo w prawo) @@ -6074,12 +6074,12 @@ Punkty muszą być ustawione bliżej niż jedna piąta odstępu między liniami Toggle Snap - Toggle Snap + Przełącz przyciąganie Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Przełącz wszystkie funkcje przyciągania. W menu możesz przełączać indywidualnie "Przyciągnij do siatki"', "Przyciągnij do obiektów" i kolejne ustawienia przyciągania diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 646d226db5..678b8eda0d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -1849,7 +1849,7 @@ invalid constraints, degenerated geometry, etc. Create a new sketch - Create a new sketch + Creați o nouă schiță @@ -3254,12 +3254,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Vertical - Vertical + Verticală Horizontal - Horizontal + Orizontal @@ -4047,7 +4047,7 @@ Requires to re-enter edit mode to take effect. Reference constraint - Reference constraint + Constrângere de referință @@ -5873,7 +5873,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Line pattern - Line pattern + Model linie diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index acd74afc8c..664f07b8b6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Исправить длину линии или расстояние между линией и вершиной или между двумя кругами @@ -592,8 +592,7 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Создать ограничение по закону преломления света (закон Снеллиуса) между двумя конечными точками лучей и отрезком в качестве границы раздела сред. @@ -1675,7 +1674,7 @@ invalid constraints, degenerated geometry, etc. Add circle to circle distance constraint - Add circle to circle distance constraint + Добавить круг к ограничениям расстояния круга @@ -2110,7 +2109,7 @@ invalid constraints, degenerated geometry, etc. Add Knot Point - Add Knot Point + Добавить точку узла @@ -2613,7 +2612,7 @@ invalid constraints, degenerated geometry, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + Количество выбранных объектов не 3 @@ -2660,7 +2659,7 @@ invalid constraints, degenerated geometry, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Выделить ровно одну линию или одну точку и одну линию или две точки или два круга из эскиза. @@ -2851,7 +2850,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Выберите либо одну точку, либо несколько кривых, либо одну кривую и несколько точек. @@ -3164,22 +3163,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unsupported visual layer operation - Unsupported visual layer operation + Неподдерживаемая операция визуального слоя It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + В настоящее время не поддерживается перемещение внешней геометрии на другой визуальный слой. Внешняя геометрия будет опущена Set knot multiplicity - Set knot multiplicity + Установить кратность узла Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Установите кратность узла в последней указанной точке, между 1 и %1: Обратите внимание, что кратность может быть проигнорирована при определенных обстоятельствах. Подробную информацию см. в документации. @@ -5847,22 +5846,22 @@ The grid spacing change if it becomes smaller than this number of pixel. Minor grid lines - Minor grid lines + Маленькие линии сетки Major grid lines - Major grid lines + Основные линии сетки Major grid line every: - Major grid line every: + Основная линия сетки каждые: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Через каждые N строк будет главная строка. Установите значение 1, чтобы отключить основные линии. @@ -5944,18 +5943,18 @@ The grid spacing change if it becomes smaller than this number of pixel. The Sketch has malformed constraints! - The Sketch has malformed constraints! + В эскизе неправильно сформированы ограничения! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Sketch имеет частично избыточные ограничения! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + Параболы были перенесены. Перемещенные файлы не будут открыты в предыдущих версиях FreeCAD!! @@ -5975,12 +5974,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate B-spline - Interpolate B-spline + Интерполировать B-сплайн Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Создать B-сплайн с помощью интерполяции, то есть через узлы в эскизе. @@ -5988,12 +5987,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate periodic B-spline - Interpolate periodic B-spline + Интерполировать периодический B-сплайн Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Нарисуйте периодический B-сплайн по интерполяции, то есть через узлы в эскизе. @@ -6001,13 +6000,13 @@ The grid spacing change if it becomes smaller than this number of pixel. B-spline by knots - B-spline by knots + B-сплайн узлами Create a B-spline by knots - Create a B-spline by knots + Создать B-сплайн с помощью узлов @@ -6015,13 +6014,13 @@ The grid spacing change if it becomes smaller than this number of pixel. Periodic B-spline by knots - Periodic B-spline by knots + Периодический B-сплайн узлами Create a periodic B-spline by knots - Create a periodic B-spline by knots + Создать периодический B-сплайн узлами @@ -6029,17 +6028,17 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + Привязка к объектам New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Новые точки привязываются к заранее выбранному объекту, а также привязываются к середине линий и дуг. Snap to Grid - Snap to Grid + Привязать к сетке @@ -6051,12 +6050,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Snap angle - Snap angle + Угол привязки Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Угловой шаг для инструментов, которые используют «Привязать под углом» (например, линия). Удерживайте CTRL, чтобы включить «Привязать под углом». Угол начинается с восточной оси (по горизонтали справа) @@ -6064,12 +6063,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + Переключить привязку Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Вкл/выкл все функции привязки. В меню вы можете индивидуально переключиться в Grid, «Привязать к объектам» и далее привязать diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index 2250b2072e..698f506c83 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Določi dolžino daljice ali razdaljo med daljico in ogliščem oz. med dvema krogoma @@ -592,8 +592,8 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Ustvari omejitev lomnega zakona med dvema končnima točkama žarkov +in robom, ki predstavlja mejo. @@ -889,12 +889,12 @@ glede na črto ali tretjo točko Create periodic B-spline - Ustvari periodični B-zlepek + Ustvari sklenjeni B-zlepek Create a periodic B-spline via control points in the sketch. - Ustvari periodični B-zlepek skozi nadzorne točke v očrtu. + Ustvari sklenjeni B-zlepek skozi nadzorne točke v očrtu. @@ -1678,7 +1678,7 @@ neveljavna omejila, izrojene geometrije, ... Add circle to circle distance constraint - Add circle to circle distance constraint + Dodaj krog omejilu razdalje medkrogoma @@ -2113,7 +2113,7 @@ neveljavna omejila, izrojene geometrije, ... Add Knot Point - Add Knot Point + Dodaj vozliščno točko @@ -2616,7 +2616,7 @@ neveljavna omejila, izrojene geometrije, ... Number of selected objects is not 3 - Number of selected objects is not 3 + Niso izbrani 3 predmeti @@ -2663,7 +2663,7 @@ neveljavna omejila, izrojene geometrije, ... Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Izberite na očrtu natanko eno črto ali točko in eno črto ali dve točki ali pa dva kroga. @@ -2856,7 +2856,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Izberite bodisi eno točko in več krivulj, bodisi eno krivuljo in več točk. @@ -3169,22 +3169,22 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Unsupported visual layer operation - Unsupported visual layer operation + Nepodprto vidno dejanje plasti It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted - It is currently unsupported to move external geometry to another visual layer. External geometry will be omitted + Trenutno ni podprto premikanje zunanjih geometrij v drugo videzno plast. Zunanje gometrije bodo opuščene Set knot multiplicity - Set knot multiplicity + Nastavi večkranost vozla Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details - Set knot multiplicity at the last point provided, between 1 and %1:Note that multiplicity may be ignored under certain circumstances.Please refer to documentation for details + Določi v zadnji podani točki večkratnost vozla med 1 in %1: Vedite, da se lahko v določenih okoliščinah večkratnost prezre. Za več podrobnosti si preberite dokumentacijo @@ -5319,13 +5319,13 @@ Izvede se s pregledom geometrij in omejil očrta. Periodic B-spline by control points - Periodični B-zlepek z nadzornimi točkami + Sklenjeni B-zlepek z nadzornimi točkami Create a periodic B-spline by control points - Ustvari periodični B-zlepek z nadzornimi točkami + Ustvari sklenjeni B-zlepek z nadzornimi točkami @@ -5736,7 +5736,7 @@ Eigen Sparse QR algoritem je optimiziran za redke razpredelnice; običajno hitre and %1 more - and %1 more + in še %1 @@ -5744,7 +5744,7 @@ Eigen Sparse QR algoritem je optimiziran za redke razpredelnice; običajno hitre P&rofiles - P&rofiles + P&reseki @@ -5855,22 +5855,22 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Minor grid lines - Minor grid lines + Pomožne mrežne črte Major grid lines - Major grid lines + Glavne mrežne črte Major grid line every: - Major grid line every: + Glavne mrežne črte vsakih: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Vsaka n-ta črta bo glavna črta. Če želite onemogočiti glavne črte, nastavite na 1. @@ -5952,18 +5952,18 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t The Sketch has malformed constraints! - The Sketch has malformed constraints! + Očrt vsebuje narobe oblikovana omejila! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Očrt vsebuje deloma čezmerna omejila! Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! - Parabolas were migrated. Migrated files won't open in previous versions of FreeCAD!! + Parabole so bile preseljene. Preseljenih datotek ne bo mogoče odpreti v prejšnjih FreeCADih! @@ -5983,12 +5983,12 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Interpolate B-spline - Interpolate B-spline + Interpoliraj B-zlepek Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Ustvari B-zlepek z interpolacijo, tj. skozi vozle očrta. @@ -5996,12 +5996,12 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Interpolate periodic B-spline - Interpolate periodic B-spline + Interpoliraj sklenjeni B-zlepek Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Ustvari sklenjeni B-zlepek z interpolacijo, t.j. skozi vozle očrta. @@ -6009,13 +6009,13 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t B-spline by knots - B-spline by knots + B-zlepek z vozli Create a B-spline by knots - Create a B-spline by knots + Ustvari B-zlepek z vozli @@ -6023,13 +6023,13 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Periodic B-spline by knots - Periodic B-spline by knots + Sklenjeni B-zlepek z vozli Create a periodic B-spline by knots - Create a periodic B-spline by knots + Ustvari sklenjeni B-zlepek skozi vozle @@ -6037,17 +6037,17 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Snap to objects - Snap to objects + Pripenjanje na predmete New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Nove točke se bodo pripenjale na trenutno predizbrane predmete, prav tako pa na razpolovišče daljic in lokov. Snap to Grid - Snap to Grid + Pripenjanje na mrežo @@ -6059,12 +6059,12 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre Snap angle - Snap angle + Pripenjanje na kót Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Kotni korak pri orodjih ki uporabljajo "Pripenjanje na kót" (npr. črte). Za omogočenje "Pripenjanja na kót" držite CTRL. Kót začne od vzhodne osi (vodoravno desno) @@ -6072,12 +6072,12 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre Toggle Snap - Toggle Snap + Preklopi pripenjanje Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Preklopi vse pripenjanje. V meniju lahko posamično preklopite "Pripenjanje na mrežo", Pripenjanje na predmete" in druge nastavitve pripenjanja diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts index 48f2a0ef16..7bf671968d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts @@ -171,7 +171,7 @@ Create arc - Create arc + Napravi luk @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Kotiraj dužinu linije, rastojanje između linije i temena ili između dva kruga @@ -455,7 +455,7 @@ Constrain horizontal distance - Constrain horizontal distance + Ograničenje horizontalnog rastojanja @@ -593,8 +593,8 @@ na izabranu tačku Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Napravi ograničenje refrakcije (Snellov zakon) između dve krajnje tačke zraka +i neke ivice koja predstavlja granicu. @@ -2114,7 +2114,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Add Knot Point - Add Knot Point + Dodaj čvor @@ -2617,7 +2617,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Number of selected objects is not 3 - Number of selected objects is not 3 + Broj izabranih objekata nije 3 @@ -2664,7 +2664,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Izaberi tačno jednu liniju, jednu tačku i jednu liniju, dve tačke ili dva kruga na skici. @@ -2857,7 +2857,7 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Izaberi ili jednu tačku i nekoliko krivih, ili jednu krivu i nekoliko tačaka. @@ -3707,7 +3707,7 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Reverse direction - Reverse direction + Obrni smer @@ -5857,22 +5857,22 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Minor grid lines - Minor grid lines + Sporedne linije koordinatne mreže Major grid lines - Major grid lines + Glavne linije koordinatne mreže Major grid line every: - Major grid line every: + Glavne linije koordinatne mreže na svakih: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + Na svakih N linija biće glavna linija. Postavi na 1 da bi onemogućio glavne linije. @@ -5954,12 +5954,12 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. The Sketch has malformed constraints! - The Sketch has malformed constraints! + Skica ima deformisana ograničenja! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Skica ima delimično suvišna ograničenja! @@ -5985,12 +5985,12 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Interpolate B-spline - Interpolate B-spline + Interpoliraj B-splajn krivu Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Napravi B-splajn interpolacijom, t.j. pomoću čvorova na skici. @@ -5998,12 +5998,12 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Interpolate periodic B-spline - Interpolate periodic B-spline + Interpoliraj periodičnu B-splajn krivu Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Napravi periodičnu B-splajn krivu interpolacijom, t.j. pomoću čvorova na skici. @@ -6011,13 +6011,13 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. B-spline by knots - B-spline by knots + B-splajn kriva pomoću čvorova Create a B-spline by knots - Create a B-spline by knots + Napravi B-splajn krivu pomoću čvorova @@ -6025,13 +6025,13 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Periodic B-spline by knots - Periodic B-spline by knots + Periodična B-splajn kriva pomoću čvorova Create a periodic B-spline by knots - Create a periodic B-spline by knots + Napravi periodičnu B-splajn krivu pomoću čvorova @@ -6039,17 +6039,17 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Snap to objects - Snap to objects + Uhvati objekat New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Nove tačke će se uhvatiti za trenutno izabrani objekat. Takođe će se uhvatiti za sredinu linija i lukova. Snap to Grid - Snap to Grid + Uhvati koordinatnu mrežu @@ -6061,12 +6061,12 @@ Tačke se moraju nalaziti na udaljenosti manjoj od 1/5 razmaka linija mreže da Snap angle - Snap angle + Uhvati ugao Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Ugaoni korak za alatke koje koriste 'Uhvati pod uglom' (na primer linija). Drži CTRL da bi omogućio 'Uhvati pod uglom'. Ugao počinje od horizontalne ose usmerene nadesno @@ -6074,12 +6074,12 @@ Tačke se moraju nalaziti na udaljenosti manjoj od 1/5 razmaka linija mreže da Toggle Snap - Toggle Snap + Uključi/Isključi hvatanje Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Uključi/Isključi sve funkcije hvatanja. U meniju možeš pojedinačno da prebacuješ 'Uhvati koordinatnu mrežu', 'Uhvati objekte' i ostala podešavanja hvatanja diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts index aac9ae9c5b..97e5a98009 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts @@ -171,7 +171,7 @@ Create arc - Create arc + Направи лук @@ -447,7 +447,7 @@ Fix a length of a line or the distance between a line and a vertex or between two circles - Fix a length of a line or the distance between a line and a vertex or between two circles + Котирај дужину линије, растојање између линије и темена или између два круга @@ -455,7 +455,7 @@ Constrain horizontal distance - Constrain horizontal distance + Ограничење хоризонталног растојања @@ -593,8 +593,8 @@ on the selected vertex Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. - Create a refraction law (Snell's law)constraint between two endpoints of rays -and an edge as an interface. + Направи ограничење рефракције (Снеллов закон) између две крајње тачке зрака +и неке ивице која представља границу. @@ -2114,7 +2114,7 @@ invalid constraints, degenerated geometry, etc. Add Knot Point - Add Knot Point + Додај чвор @@ -2617,7 +2617,7 @@ invalid constraints, degenerated geometry, etc. Number of selected objects is not 3 - Number of selected objects is not 3 + Број изабраних објеката није 3 @@ -2664,7 +2664,7 @@ invalid constraints, degenerated geometry, etc. Select exactly one line or one point and one line or two points or two circles from the sketch. - Select exactly one line or one point and one line or two points or two circles from the sketch. + Изабери тачно једну линију, једну тачку и једну линију, две тачке или два круга на скици. @@ -2857,7 +2857,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select either one point and several curves, or one curve and several points. - Select either one point and several curves, or one curve and several points. + Изабери или једну тачку и неколико кривих, или једну криву и неколико тачака. @@ -3707,7 +3707,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Reverse direction - Reverse direction + Обрни смер @@ -5857,22 +5857,22 @@ The grid spacing change if it becomes smaller than this number of pixel. Minor grid lines - Minor grid lines + Споредне линије координатне мреже Major grid lines - Major grid lines + Главне линије координатне мреже Major grid line every: - Major grid line every: + Главне линије координатне мреже на сваких: Every N lines there will be a major line. Set to 1 to disable major lines. - Every N lines there will be a major line. Set to 1 to disable major lines. + На сваких Н линија биће главна линија. Постави на 1 да би онемогућио главне линије. @@ -5954,12 +5954,12 @@ The grid spacing change if it becomes smaller than this number of pixel. The Sketch has malformed constraints! - The Sketch has malformed constraints! + Скица има деформисана ограничења! The Sketch has partially redundant constraints! - The Sketch has partially redundant constraints! + Скица има делимично сувишна ограничења! @@ -5985,12 +5985,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate B-spline - Interpolate B-spline + Интерполирај Б-сплајн криву Create a B-spline by interpolation, i.e. via knots in the sketch. - Create a B-spline by interpolation, i.e. via knots in the sketch. + Направи Б-сплајн криву интерполацијом, т.ј. помоћу чворова на скици. @@ -5998,12 +5998,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Interpolate periodic B-spline - Interpolate periodic B-spline + Интерполирај периодичну Б-сплајн криву Create a periodic B-spline by interpolation, i.e. via knots in the sketch. - Create a periodic B-spline by interpolation, i.e. via knots in the sketch. + Направи периодичну Б-сплајн криву интерполацијом, т.ј. помоћу чворова на скици. @@ -6011,13 +6011,13 @@ The grid spacing change if it becomes smaller than this number of pixel. B-spline by knots - B-spline by knots + Б-сплајн крива помоћу чворова Create a B-spline by knots - Create a B-spline by knots + Направи Б-сплајн криву помоћу чворова @@ -6025,13 +6025,13 @@ The grid spacing change if it becomes smaller than this number of pixel. Periodic B-spline by knots - Periodic B-spline by knots + Периодична Б-сплајн крива помоћу чворова Create a periodic B-spline by knots - Create a periodic B-spline by knots + Направи периодичну Б-сплајн криву помоћу чворова @@ -6039,17 +6039,17 @@ The grid spacing change if it becomes smaller than this number of pixel. Snap to objects - Snap to objects + Ухвати објекат New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. - New points will snap to the currently preselected object. It will also snap to the middle of lines and arcs. + Нове тачке ће се ухватити за тренутно изабрани објекат. Такође ће се ухватити за средину линија и лукова. Snap to Grid - Snap to Grid + Ухвати координатну мрежу @@ -6061,12 +6061,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Snap angle - Snap angle + Ухвати угао Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle start from the East axis (horizontal right) + Угаони корак за алатке које користе 'Ухвати под углом' (на пример линија). Држи CTRL да би омогућио 'Ухвати под углом'. Угао почиње од хоризонталне осе усмерене надесно @@ -6074,12 +6074,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle Snap - Toggle Snap + Укључи/Искључи хватање Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings - Toggle all snapping functionalities. In the menu you can toggle individually 'Snap to Grid', 'Snap to Objects' and further snap settings + Укључи/Искључи све функције хватања. У менију можеш појединачно да пребацујеш 'Ухвати координатну мрежу', 'Ухвати објекте' и остала подешавања хватања diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index efa1827c94..bda1301b2a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -1206,7 +1206,7 @@ then call this command, then choose the desired sketch. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -1231,7 +1231,7 @@ as mirroring reference. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -1554,7 +1554,7 @@ invalid constraints, degenerated geometry, etc. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -2431,7 +2431,7 @@ invalid constraints, degenerated geometry, etc. Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -4597,7 +4597,7 @@ However, no constraints linking to the endpoints were found. Arc - 弧 + 圓弧 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts index 1d264ef78a..0847e0dab5 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -391,65 +391,65 @@ Bind Spreadsheet Cells - Bind Spreadsheet Cells + Sloučit tabulkové buňky To cells: - To cells: + Na buňky: Sheet: - Sheet: + Tabule: First cell in range - First cell in range + První buňka v rozsahu Last cell in range - Last cell in range + Poslední buňka v rozsahu Bind cells: - Bind cells: + Vázané buňky: Start cell address - Start cell address + Počáteční adresa buňky End cell address - End cell address + Adresa koncové buňky Start cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - Start cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Počáteční adresa buňky, ke které se má navázat. +Pokud chcete použít výraz, zadejte '='. +Výraz se musí vyhodnotit jako řetězec nějaké adresy buňky. End cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Koncová adresa buňky, ke které se má navázat. +Pokud chcete použít výraz, zadejte '='. +Výraz se musí vyhodnotit jako řetězec nějaké adresy buňky. Which spread sheet to bind to - Which spread sheet to bind to + Na kterou tabulku se má vázat @@ -468,7 +468,7 @@ Užitečné pro vyhnutí se cyklickým závislostem, ale buďte opatrní! Unbind - Unbind + Odpárovat @@ -486,12 +486,12 @@ Užitečné pro vyhnutí se cyklickým závislostem, ale buďte opatrní! Setup Configuration Table - Setup Configuration Table + Tabulka konfigurace nastavení Cell range: - Cell range: + Rozsah buněk: @@ -504,14 +504,14 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Starting cell address. + Počáteční adresa buňky. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Předpokládá se, že první sloupec rozsahu obsahuje seznam konfigurace +jména, která budou použita pro vygenerování seznamu řetězců a navázání na daný +vlastnost pro uživatele k dynamickému přepínání konfigurace. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +První řádek rozsahu bude svázán s jakýmkoli (nepřímo) vybraným řádkem +tím majetkem. @@ -525,42 +525,42 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Ending cell address. + Koncová adresa buňky. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Předpokládá se, že první sloupec rozsahu obsahuje seznam konfigurace +jména, která budou použita pro vygenerování seznamu řetězců a navázání na daný +vlastnost pro uživatele k dynamickému přepínání konfigurace. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +První řádek rozsahu bude svázán s jakýmkoli (nepřímo) vybraným řádkem +tím majetkem. Property: - Property: + Vlastnost: Type in an expression to specify the object and property name to dynamically switch the design configuration. The property will be created if not exist. - Type in an expression to specify the object and property name to dynamically -switch the design configuration. The property will be created if not exist. + Zadejte výraz, který dynamicky určí název objektu a vlastnosti +změnit konfiguraci návrhu. Pokud vlastnost neexistuje, bude vytvořena. Group: - Group: + Skupina: Optional property group name. - Optional property group name. + Volitelný název skupiny vlastností. Unsetup - Unsetup + Zrušit nastavení @@ -881,7 +881,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Bind cells - Bind cells + Vázané buňky @@ -895,7 +895,7 @@ Chcete pokračovat? Bind Spreadsheet Cells - Bind Spreadsheet Cells + Sloučit tabulkové buňky @@ -907,7 +907,7 @@ Chcete pokračovat? Unbind cells - Unbind cells + Zrušte vazbu buněk @@ -920,17 +920,17 @@ Chcete pokračovat? Display Settings - Display Settings + Nastavení zobrazení If checked, use the custom presentation to display cell string. - If checked, use the custom presentation to display cell string. + Pokud je zaškrtnuto, použijte vlastní prezentaci k zobrazení řetězce buněk. Show alias in cell with format - Show alias in cell with format + Zobrazit alias v buňce s formátem @@ -939,51 +939,51 @@ Defaults to: %V = %A %A - alias name %V - cell value - The format of the custom cell string presentation. -Defaults to: %V = %A + Formát prezentace vlastního řetězce buňky. +Výchozí hodnota: %V = %A -%A - alias name -%V - cell value +%A - název aliasu +%V - hodnota buňky Import/Export Settings - Import/Export Settings + Nastavení importu/exportu Delimiter Character: - Delimiter Character: + Znak oddělovače: <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> - <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> + <html><head/><body><p>Znak, který se má použít jako oddělovač pole. Výchozí je tabulátor, ale běžně se používají také čárky (,) a středníky (;). Vyberte ze seznamu nebo do pole zadejte vlastní. Musí to být jeden znak nebo slova <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">čárka</span> nebo <span style =" font-style:italic;">středník</span>.</p></body></html> tab - tab + tab Quote Character: - Quote Character: + Citace postavy: <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> - <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> + <html><head/><body><p>Znak používaný k oddělování řetězců, typicky jednoduché uvozovky (') nebo dvojité uvozovky (&quot;). Musí to být jeden znak.</p></body></html> Escape Character: - Escape Character: + Úniková znak: <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> - <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> + <html><head/><body><p>Escape znak, obvykle zpětné lomítko (\), používané k označení speciálních netisknutelných znaků, např. \t = tab. Musí to být jeden znak.</p></body></html> @@ -991,12 +991,12 @@ Defaults to: %V = %A Setup configuration table - Setup configuration table + Nastavení konfigurace tabulky Unsetup configuration table - Unsetup configuration table + Zrušení nastavení konfigurační tabulky @@ -1006,7 +1006,7 @@ Defaults to: %V = %A Insert %n row(s) above Vložit %n řádek(řádků) nad - Insert %n row(s) above + Vložit řádky %n výše Insert %n row(s) above Insert %n row(s) above @@ -1075,7 +1075,7 @@ Defaults to: %V = %A Remove column(s) - Odstranit sloupec(ce) + Odstranit sloupce(sloupce) Remove column(s) Remove column(s) Remove column(s) @@ -1091,19 +1091,19 @@ Defaults to: %V = %A Recompute - Recompute + Přepočítat Bind... - Bind... + Svázat... Configuration table... - Configuration table... + Nastavení konfigurace tabulky... @@ -1115,7 +1115,7 @@ Defaults to: %V = %A Split cells - Split cells + Rozdělit buňku @@ -1165,7 +1165,7 @@ Defaults to: %V = %A &Spreadsheet - &Spreadsheet + &Tabulka @@ -1175,7 +1175,7 @@ Defaults to: %V = %A &Styles - &Styles + &Styl diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.ts index c69fb37b86..fe7cb84cb4 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_id.ts @@ -347,7 +347,7 @@ Set cell properties - + Edit cell Edit cell @@ -744,109 +744,109 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 QtColorPicker - - + + Black Hitam - - + + White Putih - - + + Red Merah - - + + Dark red Merah gelap - - + + Green hijau - - + + Dark green Hijau tua - - + + Blue Biru - - + + Dark blue Biru tua - - + + Cyan Cyan - - + + Dark cyan Dark cyan - - + + Magenta Magenta - - + + Dark magenta Magenta gelap - - + + Yellow Kuning - - + + Dark yellow Kuning gelap - - + + Gray Abu-abu - - + + Dark gray Abu-abu gelap - - + + Light gray Abu-abu muda - + Custom Color Custom Color @@ -919,41 +919,69 @@ Do you want to continue? + Display Settings + Display Settings + + + + If checked, use the custom presentation to display cell string. + If checked, use the custom presentation to display cell string. + + + + Show alias in cell with format + Show alias in cell with format + + + + The format of the custom cell string presentation. +Defaults to: %V = %A + +%A - alias name +%V - cell value + The format of the custom cell string presentation. +Defaults to: %V = %A + +%A - alias name +%V - cell value + + + Import/Export Settings Import/Export Settings - + Delimiter Character: Delimiter Character: - + <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> - + tab tab - + Quote Character: Quote Character: - + <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> - + Escape Character: Escape Character: - + <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> @@ -971,14 +999,6 @@ Do you want to continue? Unsetup configuration table - - SpreadsheetGui::Module - - - Unnamed - Tanpa nama - - SpreadsheetGui::SheetTableView @@ -1134,4 +1154,12 @@ Do you want to continue? &Styles + + Py + + + Unnamed + Tanpa nama + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts index d3d2df05cb..6c0338d72d 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts @@ -124,7 +124,7 @@ Vertically center-align contents of selected cells - Vertically center-align contents of selected cells + Aliniere verticală centrată a conținutului celulelor selectate @@ -178,7 +178,7 @@ Merge selected cells - Merge selected cells + Îmbinare celule selectate @@ -214,7 +214,7 @@ Split previously merged cells - Split previously merged cells + Împarte celulele îmbinate anterior @@ -232,7 +232,7 @@ Set text in selected cells bold - Set text in selected cells bold + Setează textul în celulele selectate îngroșat @@ -250,7 +250,7 @@ Set text in selected cells italic - Set text in selected cells italic + Setează textul în celulele selectate cursiv @@ -268,7 +268,7 @@ Underline text in selected cells - Underline text in selected cells + Subliniază textul în celulele selectate @@ -276,7 +276,7 @@ Custom Color - Custom Color + Culoare personalizată @@ -294,62 +294,62 @@ Left-align cell - Left-align cell + Aliniere la stanga Center cell - Center cell + Celulă centrală Right-align cell - Right-align cell + Aliniere la dreapta Top-align cell - Top-align cell + Aliniere sus Bottom-align cell - Bottom-align cell + Aliniere jos Vertically center cells - Vertically center cells + Aliniere verticală centrată Set bold text - Set bold text + Setează text îngroșat Set italic text - Set italic text + Setare text italic Set underline text - Set underline text + Setare text subliniere Create Spreadsheet - Create Spreadsheet + Creare foaie de calcul Set cell properties - Set cell properties + Setați proprietățile celulei Edit cell - Edit cell + Editare celulă @@ -373,17 +373,17 @@ Clear cell(s) - Clear cell(s) + Golește celula(ele) Set foreground color - Set foreground color + Setare culoare prim-plan Set background color - Set background color + Setează culoarea de fundal @@ -391,84 +391,84 @@ Bind Spreadsheet Cells - Bind Spreadsheet Cells + Legare celule de foaie To cells: - To cells: + Pentru celule: Sheet: - Sheet: + Foaie: First cell in range - First cell in range + Prima celulă în intervalul Last cell in range - Last cell in range + Ultima celulă în gamă Bind cells: - Bind cells: + Legare celule: Start cell address - Start cell address + Începe adresa celulei End cell address - End cell address + Sfârșit adresa celulei Start cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - Start cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Începe adresa celulei pentru a se lega. +Tastează '=' dacă vrei să folosești o expresie. +Expresia trebuie să evalueze la un șir de adrese celulare. End cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Adresa celulei de sfârșit pentru a se lega. +Tastați '=' dacă doriți să utilizați o expresie. +Expresia trebuie să evalueze la un șir de adrese celulare. Which spread sheet to bind to - Which spread sheet to bind to + Ce harti pentru a se lega de The dependency with the referenced spreadsheet will be hidden to the dependency checking. Useful to avoid cyclic dependencies, but use with caution! - The dependency with the referenced spreadsheet will -be hidden to the dependency checking. -Useful to avoid cyclic dependencies, but use with caution! + Dependența cu foaia de calcul la care se face referire va fi +ascunsă la verificarea dependenței. +Utilă pentru a evita dependențele ciclice, dar utilizați cu prudență! Hide dependency of binding - Hide dependency of binding + Ascunde dependența de legare Unbind - Unbind + Desface @@ -486,12 +486,12 @@ Useful to avoid cyclic dependencies, but use with caution! Setup Configuration Table - Setup Configuration Table + Configurarea tabelului de configurare Cell range: - Cell range: + Interval celulă: @@ -504,14 +504,13 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Starting cell address. + Adresă celulă pornită. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Prima coloană a intervalului se presupune că conține o listă de nume de configurare, care vor fi folosite pentru a genera o listă de şir şi pentru a lega la +proprietatea dată pentru utilizator să schimbe dinamic configuraţia. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +Primul rând al intervalului va fi legat de rândul selectat (indirect) +de acea proprietate. @@ -525,42 +524,41 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Ending cell address. + Se termină adresa celulară. -The first column of the range is assumed to contain a list of configuration -names, which will be used to generate a string list and bind to the given -property for user to dynamically switch configuration. +Prima coloană a intervalului se presupune că conține o listă de nume de configurare, care vor fi folosite pentru a genera o listă de şir şi pentru a lega la +proprietatea dată pentru utilizator să schimbe dinamic configuraţia. -The first row of the range will be bound to whatever row (indirectly) selected -by that property. +Primul rând al intervalului va fi legat de rândul selectat (indirect) +de acea proprietate. Property: - Property: + Proprietate: Type in an expression to specify the object and property name to dynamically switch the design configuration. The property will be created if not exist. - Type in an expression to specify the object and property name to dynamically -switch the design configuration. The property will be created if not exist. + Introduceți o expresie pentru a specifica numele obiectului și al proprietății pentru a +schimba configurația proiectului. Proprietatea va fi creată dacă nu există. Group: - Group: + Grupă: Optional property group name. - Optional property group name. + Nume grup de proprietăți opțional. Unsetup - Unsetup + Dezconfigurare @@ -603,7 +601,7 @@ switch the design configuration. The property will be created if not exist. Horizontal - Horizontal + Orizontal @@ -624,7 +622,7 @@ switch the design configuration. The property will be created if not exist. Vertical - Vertical + Verticală @@ -725,19 +723,19 @@ switch the design configuration. The property will be created if not exist. Copy & Paste failed - Copy & Paste failed + Copiere & Lipire eșuată Alias contains invalid characters! - Alias contains invalid characters! + Aliasul conține caractere invalide! Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Consultați celula prin alias, de exemplu +Spreadsheet.my_alias_name în loc de Spreadsheet.B1 @@ -848,7 +846,7 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Custom Color - Custom Color + Culoare personalizată @@ -861,19 +859,19 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 &Content: - &Content: + &Conținut: &Alias: - &Alias: + &Alias: Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Refer to cell by alias, for example -Spreadsheet.my_alias_name instead of Spreadsheet.B1 + Consultați celula prin alias, de exemplu +Spreadsheet.my_alias_name în loc de Spreadsheet.B1 @@ -881,33 +879,33 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Bind cells - Bind cells + Legă celulele Source and target cell count mismatch. Partial binding may still work. Do you want to continue? - Source and target cell count mismatch. Partial binding may still work. + Neconcordanţa numărului de celule ţintă şi sursă. Legarea parţială poate funcţiona în continuare. -Do you want to continue? +Doriţi să continuaţi? Bind Spreadsheet Cells - Bind Spreadsheet Cells + Legare celule de foaie Error: - Error: + Eroare: Unbind cells - Unbind cells + Desprinde celulele @@ -920,17 +918,17 @@ Do you want to continue? Display Settings - Display Settings + Setări de afișare If checked, use the custom presentation to display cell string. - If checked, use the custom presentation to display cell string. + Dacă este bifat, utilizaţi prezentarea personalizată pentru a afişa şirul de celule. Show alias in cell with format - Show alias in cell with format + Arată alias în celulă cu format @@ -939,51 +937,51 @@ Defaults to: %V = %A %A - alias name %V - cell value - The format of the custom cell string presentation. -Defaults to: %V = %A + Formatul prezentării textului personalizat de celulă. +Implicit la: %V = %A -%A - alias name -%V - cell value +%A - nume alias +%V - valoare celulară Import/Export Settings - Import/Export Settings + Importă/Exportă Setările Delimiter Character: - Delimiter Character: + Caracterul Delimitator: <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> - <html><head/><body><p>Character to use as field delimiter. Default is tab, but also commonly used are commas (,) and semicolons (;). Select from the list or enter your own in the field. Must be a single character or the words <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">comma</span>, or <span style=" font-style:italic;">semicolon</span>.</p></body></html> + <html><head/><body><p>Caracter pentru a utiliza ca delimitator de câmp. Modul implicit este fila, dar de asemenea folosit în mod obișnuit sunt virgule (,) și punct și virgulă (;). Selectați din listă sau introduceți propriul în câmp. Trebuie să fie un singur caracter sau cuvintele <span style=" font-style:italic;">tab</span>, <span style=" font-style:italic;">virgula</span>, sau <span style=" font-style:italic;">punct și virgulă</span>.</p></body></html> tab - tab + tab Quote Character: - Quote Character: + Caracterul Ofertei: <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> - <html><head/><body><p>Character used to delimit strings, typically is single quote (') or double quote (&quot;). Must be a single character.</p></body></html> + <html><head/><body><p>Caracter folosit pentru delimitarea șirurilor, de obicei este o ofertă unică (') sau o ofertă dublă (&quot;). Trebuie să fie un singur caracter.</p></body></html> Escape Character: - Escape Character: + Caracterul de scăpare: <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> - <html><head/><body><p>Escape character, typically the backslash (\), used to indicate special unprintable characters, e.g. \t = tab. Must be a single character.</p></body></html> + <html><head/><body><p>Caracter Escap, de obicei backslash (\), folosit pentru a indica caractere speciale neimprimabile, e.. \t = tab. Trebuie să fie un singur caracter.</p></body></html> @@ -991,12 +989,12 @@ Defaults to: %V = %A Setup configuration table - Setup configuration table + Tabel de configurare Unsetup configuration table - Unsetup configuration table + Dezinstalează tabelul de configurare @@ -1004,36 +1002,36 @@ Defaults to: %V = %A Insert %n row(s) above - - Insert %n row(s) above - Insert %n row(s) above - Insert %n row(s) above + + Introduceți %n rânduri mai sus + Introduceți %n rânduri mai sus + Introduceți %n rânduri mai sus Insert %n row(s) below - Insert %n row(s) below - Insert %n row(s) below + Introduceți i%n rânduri mai (jos) + Introduceți i%n rânduri mai jos Insert %n row(s) below Insert %n non-contiguous rows - - Insert %n non-contiguous rows - Insert %n non-contiguous rows + Insert %n non-contiguous rows + Insert in non-contiguous rows + Insert i%n non-contiguous rows Remove row(s) - Remove row(s) - Remove row(s) + Eliminați rândul(s) + Elimină rând(e) Remove row(s) @@ -1041,7 +1039,7 @@ Defaults to: %V = %A Insert %n column(s) left - Insert %n column(s) left + Inserare coloană la stânga Insert %n column(s) left Insert %n column(s) left @@ -1050,8 +1048,8 @@ Defaults to: %V = %A Insert %n column(s) right - Insert %n column(s) right - Insert %n column(s) right + Inserare coloană la dreapta + Inserare coloană la dreapta Insert %n column(s) right @@ -1068,7 +1066,7 @@ Defaults to: %V = %A Remove column(s) - Remove column(s) + Elimină coloanele Remove column(s) Remove column(s) @@ -1083,19 +1081,19 @@ Defaults to: %V = %A Recompute - Recompute + Recomandare Bind... - Bind... + Bind... Configuration table... - Configuration table... + Tabel de configurare... @@ -1107,7 +1105,7 @@ Defaults to: %V = %A Split cells - Split cells + Divizarea celulelor @@ -1157,7 +1155,7 @@ Defaults to: %V = %A &Spreadsheet - &Spreadsheet + Vedere & Foaie de calcul @@ -1167,7 +1165,7 @@ Defaults to: %V = %A &Styles - &Styles + Aspect diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts index 3ec52d3106..d045283ad6 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sl.ts @@ -486,7 +486,7 @@ Uporabno pri izogibanju krožne odvisnosti, vendar je potrebna previdnost! Setup Configuration Table - Setup Configuration Table + Nastavi nastavitveno preglednico @@ -989,12 +989,12 @@ Privzeto: %V = %A Setup configuration table - Setup configuration table + Nastavi nastavitveno preglednico Unsetup configuration table - Unsetup configuration table + Razveljavi nastavitveno preglednico diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 69ceb6d5b5..8ef3e1e4fb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -4770,7 +4770,7 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Line Spacing - ISO - Line Spacing - ISO + Zeilenabstand - ISO diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index 8cbdcfd712..16dcfe8ba8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + No hay caras en la selección. @@ -4122,12 +4122,12 @@ Cada unidad tiene aproximadamente 0.1 mm de ancho If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Si está marcado, el sistema intentará corregir automáticamente las referencias de cota cuando el modelo cambie. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Autocorrección de referencia de cotas @@ -4195,22 +4195,22 @@ al rayar una cara con un patrón PAT If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Si está marcado, FreeCAD usará el nuevo algoritmo de búsqueda de caras. Si no está marcado, FreeCAD usará el buscador de caras original. Use New Face Finder - Use New Face Finder + Usar nuevo buscador de caras Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Pases de bordes superpuestos <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>El número de veces que FreeCAD debe intentar eliminar los bordes superpuestos devueltos por el algoritmo de eliminación de línea oculto. Un valor de 0 indica que no se puede limpiar, 1 indica un solo pase y 2 indica que se debe realizar un segundo paso. Los valores superiores a 2 generalmente no son productivos. Cada pase añade el tiempo necesario para producir el dibujo.</p></body></html> @@ -4760,27 +4760,27 @@ al rayar una cara con un patrón PAT <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Controla el tamaño del espacio entre el punto de cota y el inicio de la línea de extensión para las acotaciones ISO. El espaciado es el valor * el ancho de línea. Normalmente, no se utiliza ningun espaciado. Si se utiliza un espaciado, 8 es el valor recomendado.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Controla el tamaño del espacio entre el punto de cota y el inicio de la línea de extensión para las acotaciones ASME. El espaciado es el valor * el ancho de línea. Normalmente, no se utiliza ningun espaciado. Si se utiliza un espaciado, 6 es el valor recomendado.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Controla el tamaño del espacio entre la línea de cota y el texto de cota para las acotaciones ISO. Line Spacing - ISO - Line Spacing - ISO + Espaciado de línea - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Controla el tamaño del espacio entre la línea de la cota y el texto de la cota. El espaciado de la línea es el valor * el ancho de la línea.</p></body></html> @@ -8453,12 +8453,12 @@ usando el espacio X/Y dado snug fit - snug fit + ajuste perfecto press fit - press fit + ajuste a presión diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index 8cdbb2a482..9b5ac3d66a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + No hay caras en la selección. @@ -4775,7 +4775,7 @@ al rayar una cara con un patrón PAT Line Spacing - ISO - Line Spacing - ISO + Espaciado de línea - ISO diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 6035535e9b..502e6bca21 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Ez dago aurpegirik hautaketan. @@ -4123,12 +4123,12 @@ Unitate bakoitzak 0.1 mm inguruko zabalera du If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Markatuta badago, sistema saiatuko da kota-erreferentziak automatikoki zuzentzen eredua aldatzen denean. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Automatikoki zuzendu kota-erreferentziak @@ -4196,12 +4196,12 @@ erabiliko den itzal-lerro kopuru maximoa If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Markatuta badago, FreeCADek aurpegiak aurkitzeko algoritmo berria erabiliko du. Ez badago markatuta, jatorrizko aurpegi-aurkitzailea erabiliko du. Use New Face Finder - Use New Face Finder + Erabili aurpegi-aurkitzaile berria @@ -4761,22 +4761,22 @@ erabiliko den itzal-lerro kopuru maximoa <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Dimentsio-puntuaren eta luzapen-lerroaren hasieraren arteko tartearen tamaina kontrolatzen du ISO kotetarako. Tartea da balioa * lerro-zabalera. Normalean ez da tarterik erabiltzen. Erabiltzen bada, gomendatutako balioa 8 da.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Dimentsio-puntuaren eta luzapen-lerroaren hasieraren arteko tartearen tamaina kontrolatzen du ASME kotetarako. Tartea da balioa * lerro-zabalera. Normalean ez da tarterik erabiltzen. Erabiltzen bada, gomendatutako balioa 6 da.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Kota-lerroaren eta kota-testuaren arteko tartearen tamaina kontrolatzen du, ISO kotetarako. Line Spacing - ISO - Line Spacing - ISO + Lerro-tartea - ISO diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 5321394c43..45e33c3db0 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -3560,7 +3560,7 @@ No faces in selection. - No faces in selection. + Aucune face dans la sélection. @@ -4025,7 +4025,7 @@ Ce répertoire sera utilisé pour la sélection des symboles. line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - Si coché, TechDraw tentera de créer des faces en utilisant les segments de ligne renvoyés par l'algorithme de suppression de ligne cachée. Les faces doivent être détectées pour utiliser les hachures, mais il peut y avoir une baisse des performances dans les modèles complexes. + Si cette case est cochée, TechDraw tentera de créer des faces en utilisant les segments de ligne renvoyés par l'algorithme de suppression de ligne cachée. Les faces doivent être détectées pour utiliser les hachures, mais il peut y avoir une baisse des performances dans les modèles complexes. @@ -4119,12 +4119,12 @@ Une unité correspond environ à 0,1 mm de largeur If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Si cette case est cochée, le système tentera de corriger automatiquement les références des cotes lorsque le modèle changera. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Corriger automatiquement les références des cotes @@ -4190,22 +4190,23 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Si cette case est cochée, FreeCAD utilisera le nouvel algorithme de reconnaissance de faces. +Si cette case n'est pas cochée, FreeCAD utilisera l'algorithme d'origine de reconnaissance de faces. Use New Face Finder - Use New Face Finder + Nouvel algorithme de reconnaissance de faces Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Passes pour supprimer les chevauchements d'arêtes <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Le nombre de fois que FreeCAD doit essayer de supprimer les arêtes qui se chevauchent et qui sont renvoyées par l'algorithme de suppression des lignes cachées. Une valeur de 0 indique qu'il n'y a pas de nettoyage, 1 indique une seule asse et 2 indique qu'une deuxième passe doit être effectuée. Les valeurs supérieures à 2 ne sont généralement pas productives. Chaque passe augmente le temps nécessaire à la production du dessin.</p></body></html> @@ -4755,27 +4756,27 @@ when hatching a face with a PAT pattern <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Contrôle la taille de l'espace entre le point de la cote et le début de la ligne d'extension pour les cotes ISO. La valeur * de largeur de ligne correspond à l'espace. Normalement, aucun espace n'est utilisé. Si l'on utilise un espace, la valeur recommandée est 8.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Contrôle la taille de l'espace entre le point de la cote et le début de la ligne d'extension pour les cotes ASME. La valeur * de largeur de ligne correspond à l'espace. Normalement, aucun espace n'est utilisé. Si un espace est utilisé, la valeur recommandée est 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Contrôle la taille de l'espace entre le point de la cote et le début de la ligne d'extension pour les cotes ISO. Line Spacing - ISO - Line Spacing - ISO + Interligne - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Contrôle la taille de l'espace entre la ligne de la cote et le texte de la cote. La valeur * de largeur de ligne est l'interligne.</p></body></html> @@ -8447,12 +8448,12 @@ en utilisant l'espacement X/Y donné snug fit - snug fit + adapté press fit - press fit + serré diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index ff41c495c6..7dac790c1e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Nincsenek felületek a kijelölésben. @@ -4121,12 +4121,12 @@ Minden egység kb. 0.1 mm széles If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Ha bejelölt, a rendszer megpróbálja automatikusan korrigálni a méretreferenciákat, amikor a modell megváltozik. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Méretreferenciák automatikus korrekciója @@ -4194,22 +4194,27 @@ amikor egy PAT-mintával töltünk ki felületet If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Ha bejelölt, a FreeCAD az új felületkereső algoritmust fogja használni. Ha nincs bejelölve, a FreeCAD az eredeti felületkeresőt fogja használni. Use New Face Finder - Use New Face Finder + Új felületkereső használata Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Átmeneti eszköz az átfedő élek eltávolítására <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Az ismétlések száma, amelyeket a FreeCAD-nek végre kell hajtania, amikor megpróbálja eltávolítani a 'Rejtett vonalak eltávolítása' algoritmus által visszaadott átfedő éleket. +Érték: +A 0 azt jelenti, hogy nincs eltávolítás, +1 azt jelenti, hogy egyetlen menetet hajt végre, +2 azt jelenti, hogy egy második menetet kell végrehajtani. +A 2 feletti értékek általában nem eredményesek. Minden egyes átmenet növeli a rajz befejezéséhez szükséges időt.</p></body></html> @@ -4759,27 +4764,27 @@ amikor egy PAT-mintával töltünk ki felületet <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Megadja a méretpont és a kiterjesztő sor kezdete közötti rés méretét ISO méretek esetén. A * vonal hossz érték a távolságot jelenti. Normális esetben nem használunk távolságot. Ha távolságot használ, akkor a 8-as érték ajánlott.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>A méretpont és a kiterjesztő vonal kezdete közötti rés méretét szabályozza az ASME méretek esetében. A * vonal hossz érték a távolságot jelenti. Normális esetben nem használunk hézagot. Ha távolságot használnak, a 6-os érték ajánlott.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Szabályozza a méretvonal és a méretszöveg közötti távolságot az ISO méretek esetében. Line Spacing - ISO - Line Spacing - ISO + Sorköz - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Megadja a méretvonal és a méretszöveg közötti távolságot. A * vonal szélesség érték a sorok közötti távolságot jelenti.</p></body></html> @@ -8453,12 +8458,12 @@ tiltott</p></body></html> snug fit - snug fit + csúszó illeszkedés press fit - press fit + zsugorított illeszkedés diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index c9c68eb614..dbbda82be8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -75,12 +75,12 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Insert 3-Point Angle Dimension Masukkan Dimensi Sudut 3-Titik @@ -88,12 +88,12 @@ CmdTechDrawActiveView - + TechDraw TechDraw - + Insert Active View (3D View) Masukkan View Aktif (View 3D) @@ -101,12 +101,12 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Insert Angle Dimension Masukkan Dimensi Sudut @@ -127,17 +127,17 @@ CmdTechDrawArchView - + TechDraw TechDraw - + Insert Arch Workbench Object Insert Arch Workbench Object - + Insert a View of a Section Plane from Arch Workbench Insert a View of a Section Plane from Arch Workbench @@ -145,12 +145,12 @@ CmdTechDrawBalloon - + TechDraw TechDraw - + Insert Balloon Annotation Insert Balloon Annotation @@ -176,12 +176,12 @@ CmdTechDrawClipGroup - + TechDraw TechDraw - + Insert Clip Group Masukkan Grup Klip @@ -189,12 +189,12 @@ CmdTechDrawClipGroupAdd - + TechDraw TechDraw - + Add View to Clip Group Add View to Clip Group @@ -202,12 +202,12 @@ CmdTechDrawClipGroupRemove - + TechDraw TechDraw - + Remove View from Clip Group Hapus View dari Grup Klip @@ -215,17 +215,17 @@ CmdTechDrawComplexSection - + TechDraw TechDraw - + Insert Complex Section Insert Complex Section - + Insert a Complex Section Insert a Complex Section @@ -295,12 +295,12 @@ CmdTechDrawDetailView - + TechDraw TechDraw - + Insert Detail View Tambahkan Tampak Detail @@ -308,12 +308,12 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Insert Diameter Dimension Masukan Dimensi Diameter @@ -321,12 +321,12 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Insert Dimension Masukan Dimensi @@ -334,17 +334,17 @@ CmdTechDrawDraftView - + TechDraw TechDraw - + Insert Draft Workbench Object Insert Draft Workbench Object - + Insert a View of a Draft Workbench object Insert a View of a Draft Workbench object @@ -352,22 +352,22 @@ CmdTechDrawExportPageDXF - + File Mengajukan - + Export Page as DXF Ekspor Halaman sebagai DXF - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) @@ -375,12 +375,12 @@ CmdTechDrawExportPageSVG - + File Mengajukan - + Export Page as SVG Ekspor Halaman sebagai SVG @@ -388,17 +388,17 @@ CmdTechDrawExtendShortenLineGroup - + TechDraw TechDraw - + Extend Line Extend Line - + Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -406,17 +406,17 @@ CmdTechDrawExtensionAreaAnnotation - + TechDraw TechDraw - + Calculate the area of selected faces Calculate the area of selected faces - + Select several faces<br> - click this tool Select several faces<br> - click this tool @@ -424,17 +424,17 @@ CmdTechDrawExtensionCascadeDimensionGroup - + TechDraw TechDraw - + Cascade Horizontal Dimensions Cascade Horizontal Dimensions - + Evenly space horizontal dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool Evenly space horizontal dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -442,19 +442,19 @@ CmdTechDrawExtensionCascadeHorizDimension - + TechDraw TechDraw - - + + Cascade Horizontal Dimensions Cascade Horizontal Dimensions - - + + Evenly space horizontal dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool Evenly space horizontal dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -462,19 +462,19 @@ CmdTechDrawExtensionCascadeObliqueDimension - + TechDraw TechDraw - - + + Cascade Oblique Dimensions Cascade Oblique Dimensions - - + + Evenly space oblique dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more parallel oblique dimensions<br>- The first dimension defines the position<br>- Click this tool Evenly space oblique dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more parallel oblique dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -482,19 +482,19 @@ CmdTechDrawExtensionCascadeVertDimension - + TechDraw TechDraw - - + + Cascade Vertical Dimensions Cascade Vertical Dimensions - - + + Evenly space vertical dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more vertical dimensions<br>- The first dimension defines the position<br>- Click this tool Evenly space vertical dimensions:<br>- Specify the cascade spacing (optional)<br>- Select two or more vertical dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -502,17 +502,17 @@ CmdTechDrawExtensionChamferDimensionGroup - + TechDraw TechDraw - + Create Horizontal Chamfer Dimension Create Horizontal Chamfer Dimension - + Create a horizontal size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool Create a horizontal size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool @@ -520,17 +520,17 @@ CmdTechDrawExtensionChangeLineAttributes - + TechDraw TechDraw - + Change Line Attributes Change Line Attributes - + Change the attributes of cosmetic lines and centerlines:<br>- Specify the line attributes (optional)<br>- Select one or more lines<br>- Click this tool Change the attributes of cosmetic lines and centerlines:<br>- Specify the line attributes (optional)<br>- Select one or more lines<br>- Click this tool @@ -538,19 +538,19 @@ CmdTechDrawExtensionCircleCenterLines - + TechDraw TechDraw - - + + Add Circle Centerlines Add Circle Centerlines - - + + Add centerlines to circles and arcs:<br>- Specify the line attributes (optional)<br>- Select one or more circles or arcs<br>- Click this tool Add centerlines to circles and arcs:<br>- Specify the line attributes (optional)<br>- Select one or more circles or arcs<br>- Click this tool @@ -558,17 +558,17 @@ CmdTechDrawExtensionCircleCenterLinesGroup - + TechDraw TechDraw - + Add Circle Centerlines Add Circle Centerlines - + Add centerlines to circles and arcs:<br>- Specify the line attributes (optional)<br>- Select one or more circles or arcs<br>- Click this tool Add centerlines to circles and arcs:<br>- Specify the line attributes (optional)<br>- Select one or more circles or arcs<br>- Click this tool @@ -576,17 +576,17 @@ CmdTechDrawExtensionCreateChainDimensionGroup - + TechDraw TechDraw - + Create Horizontal Chain Dimensions Create Horizontal Chain Dimensions - + Create a sequence of aligned horizontal dimensions:<br>- Select three or more vertexes<br>- Click this tool Create a sequence of aligned horizontal dimensions:<br>- Select three or more vertexes<br>- Click this tool @@ -594,17 +594,17 @@ CmdTechDrawExtensionCreateCoordDimensionGroup - + TechDraw TechDraw - + Create Horizontal Coordinate Dimensions Create Horizontal Coordinate Dimensions - + Create multiple evenly spaced horizontal dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool Create multiple evenly spaced horizontal dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool @@ -612,19 +612,19 @@ CmdTechDrawExtensionCreateHorizChainDimension - + TechDraw TechDraw - - + + Create Horizontal Chain Dimensions Create Horizontal Chain Dimensions - - + + Create a sequence of aligned horizontal dimensions:<br>- Select three or more vertexes<br>- Click this tool Create a sequence of aligned horizontal dimensions:<br>- Select three or more vertexes<br>- Click this tool @@ -632,19 +632,19 @@ CmdTechDrawExtensionCreateHorizChamferDimension - + TechDraw TechDraw - - + + Create Horizontal Chamfer Dimension Create Horizontal Chamfer Dimension - - + + Create a horizontal size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool Create a horizontal size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool @@ -652,19 +652,19 @@ CmdTechDrawExtensionCreateHorizCoordDimension - + TechDraw TechDraw - - + + Create Horizontal Coordinate Dimensions Create Horizontal Coordinate Dimensions - - + + Create multiple evenly spaced horizontal dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool Create multiple evenly spaced horizontal dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool @@ -672,17 +672,17 @@ CmdTechDrawExtensionCreateLengthArc - + TechDraw TechDraw - + Create Arc Length Dimension Create Arc Length Dimension - + Create an arc length dimension:<br>- Select a single arc<br>- Click this tool Create an arc length dimension:<br>- Select a single arc<br>- Click this tool @@ -690,19 +690,19 @@ CmdTechDrawExtensionCreateObliqueChainDimension - + TechDraw TechDraw - - + + Create Oblique Chain Dimensions Create Oblique Chain Dimensions - - + + Create a sequence of aligned oblique dimensions:<br>- Select three or more vertexes<br>- The first two vertexes define the direction<br>- Click this tool Create a sequence of aligned oblique dimensions:<br>- Select three or more vertexes<br>- The first two vertexes define the direction<br>- Click this tool @@ -710,19 +710,19 @@ CmdTechDrawExtensionCreateObliqueCoordDimension - + TechDraw TechDraw - - + + Create Oblique Coordinate Dimensions Create Oblique Coordinate Dimensions - - + + Create multiple evenly spaced oblique dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- The first two vertexes also define the direction<br>- Click this tool Create multiple evenly spaced oblique dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- The first two vertexes also define the direction<br>- Click this tool @@ -730,19 +730,19 @@ CmdTechDrawExtensionCreateVertChainDimension - + TechDraw TechDraw - - + + Create Vertical Chain Dimensions Create Vertical Chain Dimensions - - + + Create a sequence of aligned vertical dimensions:<br>- Select three or more vertexes<br>- Click this tool Create a sequence of aligned vertical dimensions:<br>- Select three or more vertexes<br>- Click this tool @@ -750,19 +750,19 @@ CmdTechDrawExtensionCreateVertChamferDimension - + TechDraw TechDraw - - + + Create Vertical Chamfer Dimension Create Vertical Chamfer Dimension - - + + Create a vertical size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool Create a vertical size and angle dimension for a chamfer:<br>- Select two vertexes<br>- Click this tool @@ -770,19 +770,19 @@ CmdTechDrawExtensionCreateVertCoordDimension - + TechDraw TechDraw - - + + Create Vertical Coordinate Dimensions Create Vertical Coordinate Dimensions - - + + Create multiple evenly spaced vertical dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool Create multiple evenly spaced vertical dimensions starting from the same baseline:<br>- Specify the cascade spacing (optional)<br>- Select three or more vertexes<br>- The selection order of the first two vertexes determines the position of the baseline<br>- Click this tool @@ -790,17 +790,17 @@ CmdTechDrawExtensionCustomizeFormat - + TechDraw TechDraw - + Customize Format Label Customize Format Label - + Select a dimension or a balloon<br> - click this tool<br> - edit the Format field, using the keyboard and/or the special buttons Select a dimension or a balloon<br> - click this tool<br> - edit the Format field, using the keyboard and/or the special buttons @@ -808,19 +808,19 @@ CmdTechDrawExtensionDecreaseDecimal - + TechDraw TechDraw - - + + Decrease Decimal Places Decrease Decimal Places - - + + Decrease the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Decrease the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -828,17 +828,17 @@ CmdTechDrawExtensionDrawCirclesGroup - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle - + Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool @@ -846,19 +846,19 @@ CmdTechDrawExtensionDrawCosmArc - + TechDraw TechDraw - - + + Add Cosmetic Arc Add Cosmetic Arc - - + + Add a cosmetic counter clockwise arc based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius and start angle)<br>- Select vertex 3 (end angle)<br>- Click this tool Add a cosmetic counter clockwise arc based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius and start angle)<br>- Select vertex 3 (end angle)<br>- Click this tool @@ -866,19 +866,19 @@ CmdTechDrawExtensionDrawCosmCircle - + TechDraw TechDraw - - + + Add Cosmetic Circle Add Cosmetic Circle - - + + Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool Add a cosmetic circle based on two vertexes:<br>- Specify the line attributes (optional)<br>- Select vertex 1 (center point)<br>- Select vertex 2 (radius)<br>- Click this tool @@ -886,23 +886,23 @@ CmdTechDrawExtensionDrawCosmCircle3Points - + TechDraw TechDraw - - + + Add Cosmetic Circle 3 Points Add Cosmetic Circle 3 Points - + Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select 3 vertexes<br>- Click this tool Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select 3 vertexes<br>- Click this tool - + Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select three vertexes<br>- Click this tool Add a cosmetic circle based on three vertexes:<br>- Specify the line attributes (optional)<br>- Select three vertexes<br>- Click this tool @@ -910,19 +910,19 @@ CmdTechDrawExtensionExtendLine - + TechDraw TechDraw - - + + Extend Line Extend Line - - + + Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -930,19 +930,19 @@ CmdTechDrawExtensionHoleCircle - + TechDraw TechDraw - - + + Add Bolt Circle Centerlines Add Bolt Circle Centerlines - - + + Add centerlines to a circular pattern of circles:<br>- Specify the line attributes (optional)<br>- Select three or more circles forming a circular pattern<br>- Click this tool Add centerlines to a circular pattern of circles:<br>- Specify the line attributes (optional)<br>- Select three or more circles forming a circular pattern<br>- Click this tool @@ -950,19 +950,19 @@ CmdTechDrawExtensionIncreaseDecimal - + TechDraw TechDraw - - + + Increase Decimal Places Increase Decimal Places - - + + Increase the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Increase the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -970,17 +970,17 @@ CmdTechDrawExtensionIncreaseDecreaseGroup - + TechDraw TechDraw - + Increase Decimal Places Increase Decimal Places - + Increase the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Increase the number of decimal places of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -988,19 +988,19 @@ CmdTechDrawExtensionInsertDiameter - + TechDraw TechDraw - - + + Insert '⌀' Prefix Insert '⌀' Prefix - - + + Insert a '⌀' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Insert a '⌀' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -1008,17 +1008,17 @@ CmdTechDrawExtensionInsertPrefixGroup - + TechDraw TechDraw - + Insert '⌀' Prefix Insert '⌀' Prefix - + Insert a '⌀' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Insert a '⌀' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -1026,19 +1026,19 @@ CmdTechDrawExtensionInsertSquare - + TechDraw TechDraw - - + + Insert '□' Prefix Insert '□' Prefix - - + + Insert a '□' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Insert a '□' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -1046,17 +1046,17 @@ CmdTechDrawExtensionLinePPGroup - + TechDraw TechDraw - + Add Cosmetic Parallel Line Add Cosmetic Parallel Line - + Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1064,19 +1064,19 @@ CmdTechDrawExtensionLineParallel - + TechDraw TechDraw - - + + Add Cosmetic Parallel Line Add Cosmetic Parallel Line - - + + Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1084,19 +1084,19 @@ CmdTechDrawExtensionLinePerpendicular - + TechDraw TechDraw - - + + Add Cosmetic Perpendicular Line Add Cosmetic Perpendicular Line - - + + Add a cosmetic line perpendicular to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool Add a cosmetic line perpendicular to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool @@ -1104,17 +1104,17 @@ CmdTechDrawExtensionLockUnlockView - + TechDraw TechDraw - + Lock/Unlock View Lock/Unlock View - + Lock or unlock the position of a view:<br>- Select a single view<br>- Click this tool Lock or unlock the position of a view:<br>- Select a single view<br>- Click this tool @@ -1122,17 +1122,17 @@ CmdTechDrawExtensionPosChainDimensionGroup - + TechDraw TechDraw - + Position Horizontal Chain Dimensions Position Horizontal Chain Dimensions - + Align horizontal dimensions to create a chain dimension:<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool Align horizontal dimensions to create a chain dimension:<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -1140,19 +1140,19 @@ CmdTechDrawExtensionPosHorizChainDimension - + TechDraw TechDraw - - + + Position Horizontal Chain Dimensions Position Horizontal Chain Dimensions - - + + Align horizontal dimensions to create a chain dimension:<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool Align horizontal dimensions to create a chain dimension:<br>- Select two or more horizontal dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -1160,19 +1160,19 @@ CmdTechDrawExtensionPosObliqueChainDimension - + TechDraw TechDraw - - + + Position Oblique Chain Dimensions Position Oblique Chain Dimensions - - + + Align oblique dimensions to create a chain dimension:<br>- Select two or more parallel oblique dimensions<br>- The first dimension defines the position<br>- Click this tool Align oblique dimensions to create a chain dimension:<br>- Select two or more parallel oblique dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -1180,19 +1180,19 @@ CmdTechDrawExtensionPosVertChainDimension - + TechDraw TechDraw - - + + Position Vertical Chain Dimensions Position Vertical Chain Dimensions - - + + Align vertical dimensions to create a chain dimension:<br>- Select two or more vertical dimensions<br>- The first dimension defines the position<br>- Click this tool Align vertical dimensions to create a chain dimension:<br>- Select two or more vertical dimensions<br>- The first dimension defines the position<br>- Click this tool @@ -1200,17 +1200,17 @@ CmdTechDrawExtensionPositionSectionView - + TechDraw TechDraw - + Position Section View Position Section View - + Orthogonally align a section view with its source view:<br>- Select a single section view<br>- Click this tool Orthogonally align a section view with its source view:<br>- Select a single section view<br>- Click this tool @@ -1218,17 +1218,17 @@ CmdTechDrawExtensionRemovePrefixChar - + TechDraw TechDraw - + Remove Prefix Remove Prefix - + Remove prefix symbols at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Remove prefix symbols at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -1236,17 +1236,17 @@ CmdTechDrawExtensionSelectLineAttributes - + TechDraw TechDraw - + Select Line Attributes, Cascade Spacing and Delta Distance Select Line Attributes, Cascade Spacing and Delta Distance - + Select the attributes for new cosmetic lines and centerlines, and specify the cascade spacing and delta distance:<br>- Click this tool<br>- Specify the attributes, spacing and distance in the dialog box<br>- Press OK Select the attributes for new cosmetic lines and centerlines, and specify the cascade spacing and delta distance:<br>- Click this tool<br>- Specify the attributes, spacing and distance in the dialog box<br>- Press OK @@ -1254,19 +1254,19 @@ CmdTechDrawExtensionShortenLine - + TechDraw TechDraw - - + + Shorten Line Shorten Line - - + + Shorten a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool Shorten a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool @@ -1274,19 +1274,19 @@ CmdTechDrawExtensionThreadBoltBottom - + TechDraw TechDraw - - + + Add Cosmetic Thread Bolt Bottom View Add Cosmetic Thread Bolt Bottom View - - + + Add a cosmetic thread to the top or bottom view of bolts/screws/rods:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool Add a cosmetic thread to the top or bottom view of bolts/screws/rods:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool @@ -1294,19 +1294,19 @@ CmdTechDrawExtensionThreadBoltSide - + TechDraw TechDraw - - + + Add Cosmetic Thread Bolt Side View Add Cosmetic Thread Bolt Side View - - + + Add a cosmetic thread to the side view of a bolt/screw/rod:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool Add a cosmetic thread to the side view of a bolt/screw/rod:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1314,19 +1314,19 @@ CmdTechDrawExtensionThreadHoleBottom - + TechDraw TechDraw - - + + Add Cosmetic Thread Hole Bottom View Add Cosmetic Thread Hole Bottom View - - + + Add a cosmetic thread to the top or bottom view of holes:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool Add a cosmetic thread to the top or bottom view of holes:<br>- Specify the line attributes (optional)<br>- Select one or more circles<br>- Click this tool @@ -1334,19 +1334,19 @@ CmdTechDrawExtensionThreadHoleSide - + TechDraw TechDraw - - + + Add Cosmetic Thread Hole Side View Add Cosmetic Thread Hole Side View - - + + Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1354,17 +1354,17 @@ CmdTechDrawExtensionThreadsGroup - + TechDraw TechDraw - + Add Cosmetic Thread Hole Side View Add Cosmetic Thread Hole Side View - + Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool Add a cosmetic thread to the side view of a hole:<br>- Specify the line attributes (optional)<br>- Select two parallel lines<br>- Click this tool @@ -1372,17 +1372,17 @@ CmdTechDrawExtensionVertexAtIntersection - + TechDraw TechDraw - + Add Cosmetic Intersection Vertex(es) Add Cosmetic Intersection Vertex(es) - + Add cosmetic vertex(es) at the intersection(s) of selected edges:<br>- Select two edges (lines, circles and/or arcs)<br>- Click this tool Add cosmetic vertex(es) at the intersection(s) of selected edges:<br>- Select two edges (lines, circles and/or arcs)<br>- Click this tool @@ -1390,22 +1390,22 @@ CmdTechDrawExtentGroup - + TechDraw TechDraw - + Insert Extent Dimension Masukkan Dimensi Extent - + Horizontal Extent Extent Horizontal - + Vertical Extent Extent Vertikal @@ -1452,12 +1452,12 @@ CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Insert Horizontal Dimension Masukkan Dimensi Horizontal @@ -1465,12 +1465,12 @@ CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Insert Horizontal Extent Dimension Masukkan Dimensi Extent Horizontal @@ -1478,28 +1478,28 @@ CmdTechDrawImage - + TechDraw TechDraw - + Insert Bitmap Image Masukan Gambar Bitmap - - + + Insert Bitmap from a file into a page Masukkan Bitmap dari file ke halaman - + Select an Image File Pilih File Gambar - + Image (*.png *.jpg *.jpeg) Gambar (*.png *.jpg *.jpeg) @@ -1507,12 +1507,12 @@ CmdTechDrawLandmarkDimension - + TechDraw TechDraw - + Insert Landmark Dimension - EXPERIMENTAL Insert Landmark Dimension - EXPERIMENTAL @@ -1533,12 +1533,12 @@ CmdTechDrawLengthDimension - + TechDraw TechDraw - + Insert Length Dimension Masukkan Dimensi Panjang @@ -1546,12 +1546,12 @@ CmdTechDrawLinkDimension - + TechDraw TechDraw - + Link Dimension to 3D Geometry Tautkan Dimensi ke Geometri 3D @@ -1572,12 +1572,12 @@ CmdTechDrawPageDefault - + TechDraw TechDraw - + Insert Default Page Masukkan Halaman Default @@ -1585,22 +1585,22 @@ CmdTechDrawPageTemplate - + TechDraw TechDraw - + Insert Page using Template Masukkan Halaman menggunakan Templat - + Select a Template File Pilih File Templat - + Template (*.svg *.dxf) Templat (*.svg *.dxf) @@ -1608,12 +1608,12 @@ CmdTechDrawPrintAll - + TechDraw TechDraw - + Print All Pages Print All Pages @@ -1621,12 +1621,12 @@ CmdTechDrawProjectShape - + TechDraw TechDraw - + Project shape... Bentuk proyek... @@ -1634,17 +1634,17 @@ CmdTechDrawProjectionGroup - + TechDraw TechDraw - + Insert Projection Group Masukkan Grup Proyeksi - + Insert multiple linked views of drawable object(s) Masukkan view-view bertaut banyak dari obyek(-obyek) yang dapat digambar @@ -1665,12 +1665,12 @@ CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Insert Radius Dimension Masukkan Dimensi Radius @@ -1678,12 +1678,12 @@ CmdTechDrawRedrawPage - + TechDraw TechDraw - + Redraw Page Gambar Ulang Halaman @@ -1704,22 +1704,22 @@ CmdTechDrawSectionGroup - + TechDraw TechDraw - + Insert a simple or complex Section View Insert a simple or complex Section View - + Section View Section View - + Complex Section Complex Section @@ -1727,12 +1727,12 @@ CmdTechDrawSectionView - + TechDraw TechDraw - + Insert Section View Masukan Gambar Potongan @@ -1753,17 +1753,17 @@ CmdTechDrawSpreadsheetView - + TechDraw TechDraw - + Insert Spreadsheet View Insert Spreadsheet View - + Insert View to a spreadsheet Insert View to a spreadsheet @@ -1874,17 +1874,17 @@ CmdTechDrawSymbol - + TechDraw TechDraw - + Insert SVG Symbol Masukkan Simbol SVG - + Insert symbol from an SVG file Masukkan simbol dari file SVG @@ -1892,13 +1892,13 @@ CmdTechDrawToggleFrame - + TechDraw TechDraw + - Turn View Frames On/Off Hidup/Matikan View Frames @@ -1906,12 +1906,12 @@ CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Insert Vertical Dimension Masukkan Dimensi Vertikal @@ -1919,12 +1919,12 @@ CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -1932,17 +1932,17 @@ CmdTechDrawView - + TechDraw TechDraw - + Insert View Insert View - + Insert a View Insert a View @@ -1963,59 +1963,59 @@ Command - - + + Drawing create page Drawing create page - + Create view Create view - + Create Projection Group Create Projection Group - + Create Clip Create Clip - + ClipGroupAdd ClipGroupAdd - + ClipGroupRemove ClipGroupRemove - + Create Symbol Create Symbol - + Create DraftView Create DraftView - + Create ArchView Create ArchView - + Create spreadsheet view Create spreadsheet view - - + + Save page to dxf Save page to dxf @@ -2035,14 +2035,8 @@ Create Annotation - - - - - - - - + + Create Dimension Create Dimension @@ -2067,22 +2061,22 @@ Create GeomHatch - + Create Image Create Image - + Drag Balloon Drag Balloon - + Drag Dimension Drag Dimension - + Create Balloon Create Balloon @@ -2092,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2137,18 +2131,18 @@ Edit Anno - + Create SectionView Create SectionView - + Create ComplexSection Create ComplexSection - - + + Edit SectionView Edit SectionView @@ -2168,167 +2162,167 @@ Tambahkan Vertex Kosmetik - + Insert Prefix Insert Prefix - + Remove Prefix Remove Prefix - + Increase/Decrease Decimal Increase/Decrease Decimal - + Pos Horiz Chain Dim Pos Horiz Chain Dim - + Pos Vert Chain Dim Pos Vert Chain Dim - + Pos Oblique Chain Dim Pos Oblique Chain Dim - + Cascade Horiz Dim Cascade Horiz Dim - + Cascade Vert Dim Cascade Vert Dim - + Cascade Oblique Dim Cascade Oblique Dim - + Create Horiz Chain Dim Create Horiz Chain Dim - + Create Vert Chain Dim Create Vert Chain Dim - + Create Oblique Chain Dim Create Oblique Chain Dim - + Create Horiz Coord Dim Create Horiz Coord Dim - + Create Vert Coord Dim Create Vert Coord Dim - + Create Oblique Coord Dim Create Oblique Coord Dim - + Create Horiz Chamfer Dim Create Horiz Chamfer Dim - + Create Vert Chamfer Dim Create Vert Chamfer Dim - + Create Arc Length Dim Create Arc Length Dim - + Bolt Circle Centerlines Bolt Circle Centerlines - + Circle Centerlines Circle Centerlines - + Cosmetic Thread Hole Side Cosmetic Thread Hole Side - + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side - + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom - + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom - + Change Line Attributes Change Line Attributes - + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) - + Cosmetic Arc Cosmetic Arc - + Cosmetic Circle Cosmetic Circle - + Cosmetic Circle 3 Points Cosmetic Circle 3 Points - + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular - + Lock/Unlock View Lock/Unlock View - + Extend/Shorten Line Extend/Shorten Line - + Calculate Face Area Calculate Face Area @@ -2342,6 +2336,11 @@ Surface Finish Symbols Surface Finish Symbols + + + Repair Dimension + Repair Dimension + CompassWidget @@ -2576,27 +2575,27 @@ Edit document source - + Document source Document source - + Create a link Create a link - + Link URL: Link URL: - + Select an image Pilih gambar - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; Semua (*) @@ -2604,23 +2603,6 @@ QObject - - - - - - - - - - - - - - - - - @@ -2629,300 +2611,369 @@ - - + + + + + + + + + + + + + + + + + + + Wrong selection Pilihan salah - - + + No Shapes, Groups or Links in this selection No Shapes, Groups or Links in this selection - - + + Select at least 1 DrawViewPart object as Base. Select at least 1 DrawViewPart object as Base. - + I do not know what base view to use. I do not know what base view to use. - + No Base View, Shapes, Groups or Links in this selection No Base View, Shapes, Groups or Links in this selection - + No profile object found in selection No profile object found in selection - + + + + + + + + + + + + + + + + + - - - - - - - - - - + Incorrect selection Pilihan salah - - + + Select an object first Pilih objek terlebih dahulu - - + + Too many objects selected Terlalu banyak objek yang dipilih - - + + Create a page first. Buat halaman terlebih dahulu. - - + + + + + + + + + No View of a Part in selection. No View of a Part in selection. - + Select one Clip group and one View. Select one Clip group and one View. - + Select exactly one View to add to group. Select exactly one View to add to group. - + Select exactly one Clip group. Select exactly one Clip group. - + Clip and View must be from same Page. Klip dan Tampilan harus dari Halaman yang sama. - + Select exactly one View to remove from Group. Select exactly one View to remove from Group. - + View does not belong to a Clip Lihat bukan milik Klip - + Choose an SVG file to open Pilih file SVG untuk membuka - + Scalable Vector Graphic Scalable Vector Graphic - + All Files Semua data - + Select at least one object. Pilih setidaknya satu objek. - + Please select only 1 Arch Section. Please select only 1 Arch Section. - + No Arch Sections in selection. No Arch Sections in selection. - + Select exactly one Spreadsheet object. Pilih salah satu objek Spreadsheet. - + No Drawing View Tidak ada tampilan gambar - + Open Drawing View before attempting export to SVG. Buka Drawing View sebelum mencoba ekspor ke SVG. - + Can not export selection Tidak bisa mengekspor pilihan - + Page contains DrawViewArch which will not be exported. Continue? Page contains DrawViewArch which will not be exported. Continue? - - + + Ellipse Curve Warning Ellipse Curve Warning - + Selected edge is an Ellipse. Radius will be approximate. Continue? Selected edge is an Ellipse. Radius will be approximate. Continue? - - + + BSpline Curve Warning BSpline Curve Warning - + Selected edge is a BSpline. Radius will be approximate. Continue? Selected edge is a BSpline. Radius will be approximate. Continue? - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + Incorrect Selection Seleksi yang salah - - + + Can not make 2d radius dimension from selection + Can not make 2d radius dimension from selection + + + + Can not make 3d radius dimension from selection + Can not make 3d radius dimension from selection + + + + BSpline Curve Error BSpline Curve Error - + Selected edge is a BSpline and a radius can not be calculated. Selected edge is a BSpline and a radius can not be calculated. - + + Can not make 2d diameter dimension from selection + Can not make 2d diameter dimension from selection + + + + Can not make 3d diameter dimension from selection + Can not make 3d diameter dimension from selection + + + Selected edge is an Ellipse. Diameter will be approximate. Continue? Selected edge is an Ellipse. Diameter will be approximate. Continue? - + Selected edge is a BSpline. Diameter will be approximate. Continue? Selected edge is a BSpline. Diameter will be approximate. Continue? - + Selected edge is a BSpline and a diameter can not be calculated. Selected edge is a BSpline and a diameter can not be calculated. - - Selection for Diameter does not contain a circular edge (edge type: %1) - Selection for Diameter does not contain a circular edge (edge type: %1) + + Can not make 2d linear dimension from selection + Can not make 2d linear dimension from selection - - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Distance Dimension - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Distance Dimension + + Can not make 3d linear dimension from selection + Can not make 3d linear dimension from selection - - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Horizontal Dimension - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Horizontal Dimension + + Can not make 2d horizontal dimension from selection + Can not make 2d horizontal dimension from selection - - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Vertical Dimension - Need 1 straight Edge, 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Vertical Dimension + + Can not make 3d horizontal dimension from selection + Can not make 3d horizontal dimension from selection - - Need two straight edges to make an Angle Dimension - Need two straight edges to make an Angle Dimension + + Can not make 2d vertical dimension from selection + Can not make 2d vertical dimension from selection - - Need three points to make a 3 point Angle Dimension - Need three points to make a 3 point Angle Dimension + + Can not make 3d vertical dimension from selection + Can not make 3d vertical dimension from selection - + + + Can not make 2d angle dimension from selection + Can not make 2d angle dimension from selection + + + + + Can not make 3d angle dimension from selection + Can not make 3d angle dimension from selection + + + + Can not make 2d extent dimension from selection + Can not make 2d extent dimension from selection + + + + Can not make 3d extent dimension from selection + Can not make 3d extent dimension from selection + + + + There is no Dimension in your selection + There is no Dimension in your selection + + + There is no 3D object in your selection Tidak ada objek 3D dalam pilihan Anda - + There are no 3D Edges or Vertices in your selection Tidak ada Tepi atau Simpul 3D dalam pilihan Anda - - - - - Selection Error - Selection Error - - - - - Please select a View [and Edges]. - Please select a View [and Edges]. - - - + Select 2 point objects and 1 View. (1) Select 2 point objects and 1 View. (1) - + Select 2 point objects and 1 View. (2) Select 2 point objects and 1 View. (2) - - No Feature with Shape in selection. - No Feature with Shape in selection. - - - - - @@ -2938,38 +2989,40 @@ - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress Task In Progress - - Selection for Radius does not contain a circular edge (edge type: %1) - Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2985,26 +3038,36 @@ - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + Close active task dialog and try again. Close active task dialog and try again. @@ -3057,8 +3120,6 @@ - - No base View in Selection. No base View in Selection. @@ -3177,97 +3238,97 @@ Some Faces in selection are already hatched. Replace? - + No TechDraw Page Tidak ada teknik menggambar - + Need a TechDraw Page for this command Butuh Halaman TechDraw untuk perintah ini - + Select a Face first Pilih Wajah dulu - + No TechDraw object in selection Tidak ada objek TechDraw dalam seleksi - + Create a page to insert. Create a page to insert. - - + + No Faces to hatch in this selection No Faces to hatch in this selection - - + + No page found Tidak ditemukan halaman - + No Drawing Pages available. No Drawing Pages available. - + No Drawing Pages in document. No Drawing Pages in document. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Halaman Ekspor Sebagai PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Ekspor sebagai SVG - - - + + + Are you sure you want to continue? Apakah yakin ingin melanjutkan? - + Show drawing Tampilkan gambar - + Toggle KeepUpdated Toggle KeepUpdated @@ -3292,9 +3353,9 @@ Rich text creator - + Rich text editor Rich text editor @@ -3334,12 +3395,12 @@ Can not find a 3D viewer - + Create Center Line Create Center Line - + Edit Center Line Edit Center Line @@ -3376,8 +3437,8 @@ The view direction in BaseView coordinates - - + + Operation Failed Operation Failed @@ -3412,96 +3473,101 @@ Edit Detail View + - Edit %1 Edit %1 - + TechDraw PosHorizChainDimension TechDraw PosHorizChainDimension - - + + No horizontal dimensions selected No horizontal dimensions selected - + TechDraw PosVertChainDimension TechDraw PosVertChainDimension - - + + No vertical dimensions selected No vertical dimensions selected - + TechDraw PosObliqueChainDimension TechDraw PosObliqueChainDimension - - + + No oblique dimensions selected No oblique dimensions selected - + TechDraw CascadeHorizDimension TechDraw CascadeHorizDimension - + TechDraw CascadeVertDimension TechDraw CascadeVertDimension - + TechDraw CascadeObliqueDimension TechDraw CascadeObliqueDimension - - - + + + Selection is empty Selection is empty - - + + No object selected No object selected - + TechDraw Hole Circle TechDraw Hole Circle - + Fewer than three circles selected Fewer than three circles selected - + TechDraw Position Section View TechDraw Position Section View - + + No faces in selection. + No faces in selection. + + + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -3571,84 +3637,104 @@ Maximum roughness grade number Maximum roughness grade number + + + Dimension Repair + Dimension Repair + + + + Can not use references from a different View + Can not use references from a different View + + + + Can not make a dimension from selection + Can not make a dimension from selection + + + + Can not make dimension from selection + Can not make dimension from selection + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - - - - - + + + + + - - - - - - + + + + + + Object dependencies Objek dependensi - + You cannot delete the anchor view of a projection group. You cannot delete the anchor view of a projection group. - - + + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - - + + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - - + + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. - + The page is not empty, therefore the following referencing objects might be lost: The page is not empty, therefore the following referencing objects might be lost: - + The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - + The projection group is not empty, therefore the following referencing objects might be lost: The projection group is not empty, therefore the following referencing objects might be lost: - + The following referencing object might break: The following referencing object might break: - + You cannot delete this weld symbol because it has a tile weld that would become broken. You cannot delete this weld symbol because @@ -3747,8 +3833,8 @@ it has a tile weld that would become broken. TaskPojGroup - - + + updates pending updates pending @@ -3935,7 +4021,7 @@ This directory will be used for the symbol selection. Advanced - + If checked, TechDraw will attempt to build faces using the line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there @@ -3946,128 +4032,138 @@ Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - + Detect Faces Detect Faces - + Highlights border of section cut in section views Highlights border of section cut in section views - + Show Section Edges Show Section Edges - + Dump intermediate results during Section view processing Dump intermediate results during Section view processing - + Debug Section Debug Section - + Dump intermediate results during Detail view processing Dump intermediate results during Detail view processing - + Debug Detail Debug Detail - + Include edges with unexpected geometry (zero length etc.) in results Include edges with unexpected geometry (zero length etc.) in results - + Allow Crazy Edges Allow Crazy Edges - + Perform a fuse operation on input shape(s) before Section view processing Perform a fuse operation on input shape(s) before Section view processing - + Fuse Before Section Fuse Before Section - + Include 2D Objects in projection Include 2D Objects in projection - + Show Loose 2D Geom Show Loose 2D Geom - + Edge Fuzz Edge Fuzz - + Size of selection area around edges Each unit is approx. 0.1 mm wide Size of selection area around edges Each unit is approx. 0.1 mm wide - + Mark Fuzz Mark Fuzz - + Selection area around center marks Each unit is approx. 0.1 mm wide Selection area around center marks Each unit is approx. 0.1 mm wide - + + If checked, system will attempt to automatically correct dimension references when the model changes. + If checked, system will attempt to automatically correct dimension references when the model changes. + + + + Auto Correct Dimension Refs + Auto Correct Dimension Refs + + + Line End Cap Shape Line End Cap Shape - + Shape of line end caps. Only change unless you know what you are doing! Shape of line end caps. Only change unless you know what you are doing! - + Round Round - + Square Kotak - + Flat Datar - + Max SVG Hatch Tiles Max SVG Hatch Tiles - + Limit of 64x64 pixel SVG tiles used to hatch a single face. For large scalings you might get an error about to many SVG tiles. Then you need to increase the tile limit. @@ -4076,29 +4172,49 @@ For large scalings you might get an error about to many SVG tiles. Then you need to increase the tile limit. - + Max PAT Hatch Segments Max PAT Hatch Segments - + Maximum hatch line segments to use when hatching a face with a PAT pattern Maximum hatch line segments to use when hatching a face with a PAT pattern - + Issue progress messages while building View geometry Issue progress messages while building View geometry - + Report Progress Report Progress - + + If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + + + + Use New Face Finder + Use New Face Finder + + + + Overlap Edges Scrub Passes + Overlap Edges Scrub Passes + + + + <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + + + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -4399,162 +4515,197 @@ when hatching a face with a PAT pattern Warna - + Normal Normal - + Normal line color Normal line color - + Hidden Line Hidden Line - + Hidden line color Hidden line color - + Preselected Preselected - + Preselection color Preselection color - + Section Face Section Face - + Section face color Section face color - + Selected Terpilih - + Selected item color Selected item color - + Section Line Section Line - + Section line color Section line color - + Background Latar Belakang - + Background color around pages Background color around pages - + Hatch Hatch - + Hatch image color Hatch image color - + Dimension Dimensi - + Color of dimension lines and text. Color of dimension lines and text. - + Geometric Hatch Geometric Hatch - + Geometric hatch pattern color Geometric hatch pattern color - + Centerline Centerline - + + Monochrome text color + Monochrome text color + + + + <html><head/><body><p>Check this to use light text and lines on dark backgrounds. Set Page Color to a dark color. Transparent or light color faces are recommended with this option.</p></body></html> + <html><head/><body><p>Check this to use light text and lines on dark backgrounds. Set Page Color to a dark color. Transparent or light color faces are recommended with this option.</p></body></html> + + + + Light on dark + Light on dark + + + + Page Color + Page Color + + + + Use a light color for dark text and dark color for light text. + Use a light color for dark text and dark color for light text. + + + Centerline color Centerline color - + Vertex Vertex - + Color of vertices in views Color of vertices in views - + Detail Highlight Detail Highlight - + Leaderline Leaderline - + Default color for leader lines Default color for leader lines - + Grid Color Grid Color - + Object faces will be transparent Object faces will be transparent - + Transparent Faces Transparent Faces - + Face color (if not transparent) Face color (if not transparent) - + + <html><head/><body><p>If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours.</p><p><br/></p><p><br/></p></body></html> + <html><head/><body><p>If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours.</p><p><br/></p><p><br/></p></body></html> + + + + Monochrome + Monochrome + + + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -4607,6 +4758,31 @@ when hatching a face with a PAT pattern Use Global Decimals Use Global Decimals + + + <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + + + + <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + + + + Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Controls the size of spacing between dimension line and dimension text for ISO dimensions. + + + + Line Spacing - ISO + Line Spacing - ISO + + + + <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + Append unit to dimension values @@ -4710,17 +4886,7 @@ Multiplier of 'Font Size' Extension Gap Factor - ASME - - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap.</p></body></html> - - - - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap.</p></body></html> - - - + <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html> @@ -4863,7 +5029,7 @@ for ProjectionGroups Dashed - Dashed + Strip @@ -5197,91 +5363,83 @@ Fast, but result is a collection of short straight lines. TechDrawGui::MDIViewPage - + Toggle &Keep Updated Toggle &Keep Updated - + Toggle &Frames Toggle &Frames - + &Export SVG & Ekspor SVG - + Export DXF Export DXF - + Export PDF Ekspor PDF - + Print All Pages Print All Pages - + Different orientation Orientasi berbeda - + The printer uses a different orientation than the drawing. Do you want to continue? Printer menggunakan orientasi yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - + Different paper size Ukuran kertas berbeda - + The printer uses a different paper size than the drawing. Do you want to continue? Printer menggunakan ukuran kertas yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - + Opening file failed Membuka file gagal - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Terpilih: - - TechDrawGui::QGIViewAnnotation - - - Text - Teks - - TechDrawGui::SymbolChooser @@ -5757,7 +5915,7 @@ Do you want to continue? Update Now - + Can not continue. Object * %1 or %2 not found. Can not continue. Object * %1 or %2 not found. @@ -6551,7 +6709,7 @@ be used instead of the dimension value TechDrawGui::TaskDlgLineDecor - + Restore Invisible Lines Restore Invisible Lines @@ -6730,7 +6888,7 @@ You can pick further points to get line segments. - + Pick Points Pick Points @@ -6811,51 +6969,51 @@ You can pick further points to get line segments. - - - + + + Edit points Edit points - + Edit Points Edit Points - - + + Pick a starting point for leader line Pick a starting point for leader line - + Save Points Save Points - + Click and drag markers to adjust leader line Click and drag markers to adjust leader line - - + + Save changes Save changes - + Left click to set a point Left click to set a point - + Press OK or Cancel to continue Press OK or Cancel to continue - + In progress edit abandoned. Start over. In progress edit abandoned. Start over. @@ -7519,12 +7677,12 @@ using the given X/Y Spacing Z - + Nothing to apply. No section direction picked yet Nothing to apply. No section direction picked yet - + Can not continue. Object * %1 or %2 not found. Can not continue. Object * %1 or %2 not found. @@ -7539,7 +7697,7 @@ using the given X/Y Spacing Line style: - Line style: + Model garis: @@ -7554,17 +7712,17 @@ using the given X/Y Spacing Dashed - Dashed + Strip Dotted - Dotted + Titik-titik Dashdot - Dashdot + Strip titik @@ -7642,7 +7800,7 @@ using the given X/Y Spacing Delta distance - + Select line attributes Select line attributes @@ -7715,6 +7873,83 @@ using the given X/Y Spacing ASME ASME + + + Hole /Shaft Fit ISO 286 + Hole /Shaft Fit ISO 286 + + + + shaft fit + shaft fit + + + + hole fit + hole fit + + + + c11 + c11 + + + + f7 + f7 + + + + + + + + + h6 + h6 + + + + h7 + h7 + + + + + + h9 + h9 + + + + k6 + k6 + + + + n6 + n6 + + + + r6 + r6 + + + + s6 + s6 + + + + loose fit + loose fit + + + + H11/ + H11/ + TechDrawGui::TaskWeldingSymbol @@ -7779,7 +8014,7 @@ using the given X/Y Spacing TechDraw_ComplexSection - + Insert complex Section View Insert complex Section View @@ -7795,12 +8030,12 @@ using the given X/Y Spacing TechDraw_ExtensionremovePrefixChar - + Remove Prefix Remove Prefix - + Remove prefix symbols at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool Remove prefix symbols at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -7816,7 +8051,7 @@ using the given X/Y Spacing TechDraw_HorizontalExtent - + Insert Horizontal Extent Dimension Masukkan Dimensi Extent Horizontal @@ -7840,7 +8075,7 @@ using the given X/Y Spacing TechDraw_SectionView - + Insert simple Section View Insert simple Section View @@ -7880,7 +8115,7 @@ using the given X/Y Spacing TechDraw_VerticalExtentDimension - + Insert Vertical Extent Dimension Insert Vertical Extent Dimension @@ -7974,4 +8209,261 @@ using the given X/Y Spacing Views + + TechDraw_MoveView + + + Move View + Move View + + + + Move a View to a new Page + Move a View to a new Page + + + + Move View to a different Page + Move View to a different Page + + + + Select View to move from list. + Select View to move from list. + + + + Select View + Select View + + + + Select From Page. + Select From Page. + + + + + Select Page + Select Page + + + + Select To Page. + Select To Page. + + + + TechDraw_ShareView + + + Share View + Share View + + + + Share a View on a second Page + Share a View on a second Page + + + + Share View with another Page + Share View with another Page + + + + View to share + View to share + + + + Select View to share from list. + Select View to share from list. + + + + Select View + Select View + + + + Select From Page. + Select From Page. + + + + + Select Page + Select Page + + + + Select To Page. + Select To Page. + + + + TaskDimRepair + + + Dimension Repair + Dimension Repair + + + + Dimension + Dimensi + + + + Name + Nama + + + + Label + Label + + + + Replace References with Current Selection + Replace References with Current Selection + + + + References 2D + References 2D + + + + Object + Obyek + + + + The View that owns this Dimension + The View that owns this Dimension + + + + Geometry + Geometry + + + + The subelements of the View that define the geometry for this Dimension + The subelements of the View that define the geometry for this Dimension + + + + References 3D + References 3D + + + + TechDrawGui::DlgStringListEditor + + + String List Editor + String List Editor + + + + <html><head/><body><p>Double click to edit a line. New lines are added at the current location in the list.</p></body></html> + <html><head/><body><p>Double click to edit a line. New lines are added at the current location in the list.</p></body></html> + + + + CmdTechDrawDimensionRepair + + + TechDraw + TechDraw + + + + Repair Dimension References + Repair Dimension References + + + + TechDrawGui::TaskDimRepair + + + Object Name + Object Name + + + + Object Label + Object Label + + + + SubElement + SubElement + + + + TechDraw_AxoLengthDimension + + + Axonometric length dimension + Axonometric length dimension + + + + Create an axonometric length dimension<br> + - select first edge to define direction and length of the dimension line<br> + - select second edge to define the direction of the extension lines<br> + - optional: select two more vertexes which define the measurement instead of the length<br> + of the first selected edge + Create an axonometric length dimension<br> + - select first edge to define direction and length of the dimension line<br> + - select second edge to define the direction of the extension lines<br> + - optional: select two more vertexes which define the measurement instead of the length<br> + of the first selected edge + + + + TechDraw_HoleShaftFit + + + Add hole or shaft fit + Add hole or shaft fit + + + + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel openes<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel openes<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box + + + + loose fit + loose fit + + + + snug fit + snug fit + + + + press fit + press fit + + + + Hole / Shaft Fit ISO 286 + Hole / Shaft Fit ISO 286 + + diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index 6fc1632343..62032689ea 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + მონიშნულში ზედაპირები არაა. @@ -4122,12 +4122,12 @@ Each unit is approx. 0.1 mm wide If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + თუ ჩართულია, სისტემა შეეცდება მოდელის ცვლილებისას ზომის მიმართვები ავტომატურად ჩაასწოროს. Auto Correct Dimension Refs - Auto Correct Dimension Refs + ზომის მიმართვების ავტომატური გასწორება @@ -4195,22 +4195,22 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + თუ ჩართულია, FreeCAD-ი ახალ ზედაპირების მოძებნის ალგორითმს გამოიყენებს. წინააღმდეგ შემთხვევაში FreeCAD-ი საწყის ზედაპირების მომძებნს გამოიყენებს. Use New Face Finder - Use New Face Finder + ახალი ზედაპირების ძებნის გამოყენება Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + HLR ალგორითმის მიერ დაბრუნებული გადაფარვადი წიბოების წაშლა <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>ცდების რაოდენობა, რამდენჯერ ცდის FreeCAD-ი დამალული ხაზების წაშლის ალგორითმის მიერ დაბრუნებული გადაფარვადი წიბოების წაშლას. 0 ნიშნავს არ წაშლას, 1 ერთხელ გავლას, 2 კი ორჯერ. ორზე მეტი მნიშვნელობა ძირითად შემთხვევებში უშედეგოა. თითოეული გავლა ამატებს დროს, რაც ნახაზის გადმოცემას სჭირდება.</p></body></html> @@ -4760,27 +4760,27 @@ when hatching a face with a PAT pattern <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>აკონტროლებს დაშორებას ზომის ხაზსა და გაფართოების ხაზს შორის ISO ზომებისთვის.. მნიშვნელობა * linewidth ინტერვალია. ჩვეულებრივ, ინტერვალი არ გამოიყენება. თუ მას იყენებთ, რეკომენდებული მნიშვნელობაა 8.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>აკონტროლებს დაშორებას ზომის ხაზსა და გაფართოების ხაზს შორის ASME ზომებისთვის.. მნიშვნელობა * linewidth ინტერვალია. ჩვეულებრივ, ინტერვალი არ გამოიყენება. თუ მას იყენებთ, რეკომენდებული მნიშვნელობაა 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + აკონტროლებს გამოტოვების ინტერვალს ზომის ხაზსა და ზომის ტექსტს შორის ISO ზომებისთვის. Line Spacing - ISO - Line Spacing - ISO + ხაზების დაშორება - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>აკონტროლებს დაშორებას ზომის ხაზსა და ზომის ტექსტს შორის.. მნიშვნელობა * linewidth ხაზებს შორის ინტერვალია.</p></body></html> @@ -8454,12 +8454,12 @@ using the given X/Y Spacing snug fit - snug fit + მჭიდროდ ჩატევა press fit - press fit + დაწოლა diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index e79532e15a..67df7ba515 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -3220,7 +3220,7 @@ No Part View in Selection - Brak widoku części w zaznaczeniu + Brak widoku części w wyborze @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + W wyborze brak ścian. @@ -4124,12 +4124,12 @@ Szerokość każdej jednostki wynosi ok. 0,1 mm If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Jeśli opcja jest zaznaczona, system będzie próbował automatycznie korygować odniesienia wymiarów, gdy model ulegnie zmianie. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Automatyczna korekcja odniesień wymiarów @@ -4197,22 +4197,27 @@ przy kreskowanie ściany jest ze wzorem PAT If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Jeśli opcja jest zaznaczona, FreeCAD użyje nowego algorytmu wyszukiwania ścian. Jeśli nie jest zaznaczone, FreeCAD będzie używał oryginalnego algorytmu znajdowania ścian. Use New Face Finder - Use New Face Finder + Użyj nowego algorytmu wyszukiwania ścian Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Przejścia narzędzia do usuwania nakładających się na siebie krawędzi <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Liczba powtórzeń, które FreeCAD powinien wykonać próbując usunąć nakładające się krawędzie zwrócone przez algorytm "Usuwania ukrytych linii". +Wartość: +0 oznacza brak usuwania, +1 oznacza pojedyncze przejście, +2 oznacza, że należy wykonać drugie przejście. +Wartości powyżej 2 są generalnie nieproduktywne. Każde przejście zwiększa czas potrzebny do wykonania rysunku.</p></body></html> @@ -4762,27 +4767,27 @@ przy kreskowanie ściany jest ze wzorem PAT <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Określa wielkość odstępu pomiędzy punktem wymiaru a początkiem linii przedłużenia dla wymiarów ISO. Wartość "długość linii" * jest odstępem. Normalnie nie stosuje się odstępu. Jeśli używany jest odstęp, zalecana jest wartość 8.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Kontroluje wielkość odstępu pomiędzy punktem wymiaru a początkiem linii przedłużenia dla wymiarów ASME. Wartość "długość linii" * jest odstępem. Normalnie nie stosuje się odstępu. Jeśli używany jest odstęp, zalecana jest wartość 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Określa wielkość odstępu między linią wymiarową a tekstem wymiaru dla wymiarów ISO. Line Spacing - ISO - Line Spacing - ISO + Odstęp linii — ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Określa wielkość odstępu pomiędzy linią wymiarową a tekstem wymiarowym. Wartość "grubość linii" * jest odstępem między wierszami.</p></body></html> @@ -8455,12 +8460,12 @@ przy użyciu podanego odstępu X/Y snug fit - snug fit + pasowanie suwliwe press fit - press fit + pasowanie skurczowe diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index d6bf4ac161..93db8255bd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -1716,7 +1716,7 @@ Section View - Section View + Vizualizare secțiune @@ -5651,7 +5651,7 @@ Do you want to continue? Vertical - Vertical + Verticală @@ -5661,7 +5661,7 @@ Do you want to continue? Horizontal - Horizontal + Orizontal diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index dda280449e..ddc48be1eb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Нет граней в выборке. @@ -4119,12 +4119,12 @@ Each unit is approx. 0.1 mm wide If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Если этот флажок установлен, система попытается автоматически исправить ссылки на размеры при изменении модели. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Автоисправление ссылок размера @@ -4192,22 +4192,22 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Если этот флажок установлен, FreeCAD будет использовать новый алгоритм поиска граней. Если флажок не установлен, FreeCAD будет использовать исходный поиск граней. Use New Face Finder - Use New Face Finder + Использовать Новый Поиск граней Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Удалить перекрывающиеся ребра, возвращаемых алгоритмом HLR <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Количество раз, когда FreeCAD должен пытаться удалить перекрывающиеся края, возвращенные алгоритмом удаления скрытых линий. Значение 0 указывает на отсутствие очистки, 1 указывает на один проход, а 2 указывает на необходимость выполнения второго прохода. Значения выше 2 обычно непродуктивны. Каждый проход увеличивает время, необходимое для создания чертежа.</p></body></html> @@ -4757,27 +4757,27 @@ when hatching a face with a PAT pattern <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Управляет размером зазора между точкой размера и началом выносной линии для размеров ISO. Значение * ширина линии — это зазор. Обычно пробел не используется. При использовании пробела рекомендуется значение 8.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Управляет размером зазора между точкой размера и началом выносной линии для размеров ASME. Значение * ширина линии — это зазор. Обычно пробел не используется. Если используется пробел, рекомендуемое значение равно 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Управляет размером интервала между размерной линией и размерным текстом для размеров ISO. Line Spacing - ISO - Line Spacing - ISO + Расстояние между строками - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Управляет размером интервала между размерной линией и размерным текстом. Значение * linewidth — межстрочный интервал.</p></body></html> @@ -8450,12 +8450,12 @@ using the given X/Y Spacing snug fit - snug fit + плотное прилегание press fit - press fit + запрессовка diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 2adc2da766..06141726d6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Med izbranim ni nobene ploskve. @@ -4123,12 +4123,12 @@ Vsaka enota predstavlja pribl. 0,1 mm If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Če je označeno, bo sistem skušal samodejno popraviti sklice kót, ko se model spremeni. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Samopopravljanje sklicev kót @@ -4196,12 +4196,12 @@ uporabi pri črtkanju ploskve z vzorcem PAT If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Če je označeno, bo FreeCAD upošteval novi algoritem za iskanje ploskev. Če ni označeno, bo FreeCAD uporabil izvirni iskalnik ploskev. Use New Face Finder - Use New Face Finder + Uporabi novi iskalnik ploskev @@ -4771,7 +4771,7 @@ uporabi pri črtkanju ploskve z vzorcem PAT Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Upravlja velikost odmika besedila od kotirne črte pri ISO kotiranju. @@ -6089,12 +6089,12 @@ Ali želite nadaljevati? Circular runout - Circular runout + Krožno opletanje Total runout - Total runout + Skupno opletanje @@ -6104,7 +6104,7 @@ Ali želite nadaljevati? Concentricity - Concentricity + Sosrediščnost @@ -6114,17 +6114,17 @@ Ali želite nadaljevati? Modifiers - Modifiers + Spremenilniki derived geometry element - derived geometry element + izpeljana geometrijska prvina Minimax (Tschebyschew) - Minimax (Tschebyschew) + Najmanši največji (Čebišov) diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts index f034680a44..e3b47b01a5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Nije izabrana stranica. @@ -4123,12 +4123,12 @@ Svaka jedinica je otprilike 0.1mm širine If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Ako je označeno, sistem će pokušati da automatski ispravi reference kota kada se model promeni. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Automatski ispravi reference kota @@ -4196,22 +4196,22 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Ako je čekirano, FreeCAD će koristiti novi algoritam za pronalaženje stranica. Ako nije čekirano, FreeCAD će koristiti originalni algoritam za pronalaženje stranica. Use New Face Finder - Use New Face Finder + Koristi novi algoritam za pronalaženje stranica Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Čišćenje ivica koje se preklapaju <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Koliko puta FreeCAD treba da pokuša da ukloni ivice koje se preklapaju a koje je vratio algoritam za uklanjanje skrivenih linija. Vrednost 0 označava da nema čišćenja, 1 označava jedan prolaz, a 2 označava da treba da se izvrši drugi prolaz. Vrednosti iznad 2 ne daju rezultat. Svaki prolaz povećava vreme potrebno za izradu crteža.</p></body></html> @@ -4761,27 +4761,27 @@ when hatching a face with a PAT pattern <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Veličina razmaka između ishodišta kote i početka pomoćne linije kote - ISO. Vrednost * širina linije je razmak. Obično se ne koristi razmak. Ako koristite razmak, preporučena vrednost 8.</p></body></html>između <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Veličina razmaka između ishodišta kote i početka pomoćne linije kote - ASME. Vrednost * širina linije je razmak. Obično se ne koristi razmak. Ako koristite razmak, preporučena vrednost 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Veličina razmaka između kotne linije i kotnog broja - ISO. Line Spacing - ISO - Line Spacing - ISO + Prored - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Veličina razmaka između kotne linije i kotnog broja. Вредност * ширина линије је размак.</p></body></html> @@ -8453,12 +8453,12 @@ umesto dužine snug fit - snug fit + labavo naleganje press fit - press fit + čvrsto naleganje diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 5824188872..906a172a3e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -3559,7 +3559,7 @@ No faces in selection. - No faces in selection. + Није изабрана страница. @@ -4123,12 +4123,12 @@ Each unit is approx. 0.1 mm wide If checked, system will attempt to automatically correct dimension references when the model changes. - If checked, system will attempt to automatically correct dimension references when the model changes. + Ако је означено, систем ће покушати да аутоматски исправи референце кота када се модел промени. Auto Correct Dimension Refs - Auto Correct Dimension Refs + Аутоматски исправи референце кота @@ -4196,22 +4196,22 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. + Ако је чекирано, FreeCAD ће користити нови алгоритам за проналажење страница. Ако није чекирано, FreeCAD ће користити оригинални алгоритам за проналажење страница. Use New Face Finder - Use New Face Finder + Користи нови алгоритам за проналажење страница Overlap Edges Scrub Passes - Overlap Edges Scrub Passes + Чишћење ивица које се преклапају <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> - <html><head/><body><p>The number of times FreeCAD should try to remove overlapping edges returned by the Hidden Line Removal algorithm. A value of 0 indicates no scrubbing, 1 indicates a single pass and 2 indicates a second pass should be performed. Values above 2 are generally not productive. Each pass adds to the time required to produce the drawing.</p></body></html> + <html><head/><body><p>Колико пута FreeCAD треба да покуша да уклони ивице које се преклапају а које је вратио алгоритам за уклањање скривених линија. Вредност 0 означава да нема чишћења, 1 означава један пролаз, а 2 означава да треба да се изврши други пролаз. Вредности изнад 2 не дају резултат. Сваки пролаз повећава време потребно за израду цртежа.</p></body></html> @@ -4761,27 +4761,27 @@ when hatching a face with a PAT pattern <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ISO dimensions. Value * linewidth is the gap. Normally, no gap is used. If using a gap, the recommended value 8.</p></body></html> + <html><head/><body><p>Величина размака између исходишта коте и почетка помоћне линије коте - ISO. Вредност * ширина линије је размак. Обично се не користи размак. Ако користите размак, препоручена вредност 8.</p></body></html> <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> - <html><head/><body><p>Controls the size of gap between dimension point and start of extension line for ASME dimensions. Value * linewidth is the gap. Normally, no gap is used. If a gap is used, the recommended value is 6.</p></body></html> + <html><head/><body><p>Величина размака између исходишта коте и почетка помоћне линије коте - ASME. Вредност * ширина линије је размак. Обично се не користи размак. Ако користите размак, препоручена вредност 6.</p></body></html> Controls the size of spacing between dimension line and dimension text for ISO dimensions. - Controls the size of spacing between dimension line and dimension text for ISO dimensions. + Величина размака између котне линије и котног броја - ISO. Line Spacing - ISO - Line Spacing - ISO + Проред - ISO <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> - <html><head/><body><p>Controls the size of spacing between dimension line and dimension text. Value * linewidth is the line spacing.</p></body></html> + <html><head/><body><p>Величина размака између котне линије и котног броја. Вредност * ширина линије је размак.</p></body></html> @@ -8453,12 +8453,12 @@ using the given X/Y Spacing snug fit - snug fit + лабаво налегање press fit - press fit + чврсто налегање diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index d770f470c6..802e624d47 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -2631,7 +2631,7 @@ Wrong selection - 錯誤的選取 + 錯誤的選擇 @@ -3682,7 +3682,7 @@ it has a weld symbol that would become broken. Object dependencies - 物件相依 + 物體相依 @@ -3804,7 +3804,7 @@ it has a tile weld that would become broken. No direction set - No direction set + 未設定方向 @@ -3836,7 +3836,7 @@ it has a tile weld that would become broken. updates pending - updates pending + 更新待處理 @@ -3844,7 +3844,7 @@ it has a tile weld that would become broken. No direction set - No direction set + 未設定方向 @@ -5437,7 +5437,7 @@ Do you want to continue? Selected: - 已選： + 已選取: @@ -8336,7 +8336,7 @@ using the given X/Y Spacing Object - 物件 + 物體 diff --git a/src/Mod/Tux/Resources/translations/Tux_id.ts b/src/Mod/Tux/Resources/translations/Tux_id.ts index 780e98d1c4..fbe7c85195 100644 --- a/src/Mod/Tux/Resources/translations/Tux_id.ts +++ b/src/Mod/Tux/Resources/translations/Tux_id.ts @@ -85,11 +85,16 @@ + Free Turntable + Free Turntable + + + Trackball Trackball - + Undefined Tidak terdefinisi diff --git a/src/Mod/Tux/Resources/translations/Tux_ro.ts b/src/Mod/Tux/Resources/translations/Tux_ro.ts index 43ee5e223d..2ff0b327cb 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ro.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ro.ts @@ -86,7 +86,7 @@ Free Turntable - Free Turntable + Gratuit de Turntable diff --git a/src/Mod/Web/Gui/Resources/translations/Web_id.ts b/src/Mod/Web/Gui/Resources/translations/Web_id.ts index 3eadb7c117..0618d8ffbd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_id.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_id.ts @@ -128,13 +128,13 @@ QObject + - Browser Browser - + File does not exist! File tidak ada! @@ -142,24 +142,24 @@ WebGui::BrowserView - - - + + + Error Kesalahan - + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. Ada kesalahan saat memuat file. Beberapa data mungkin telah dimodifikasi atau tidak dipulihkan sama sekali. Lihat di tampilan laporan untuk informasi yang lebih spesifik tentang objek yang terlibat. - + There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - + Loading %1... Memuat %1... @@ -167,17 +167,17 @@ WebGui::WebView - + Open in External Browser Buka di Browser eksternal - + Open in new window Buka di jendela baru - + View source Lihat sumber diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts index 91cb8bbeca..425b4293c6 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts @@ -156,7 +156,7 @@ There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. + 載入檔案時出現嚴重錯誤. 某些資料可能已被修改或根本未恢復. 儲存專案很可能會導致資料丟失.